Be a little more precise in the title by giving the family name and the
own name of the hardware block. Despite the original compatibles, this
file describes a SafeXcel EIP-76 hardware random number generator.
Signed-off-by: Miquel Raynal (Schneider Electric) <miquel.raynal@bootlin.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
These bindings had mixed up local and domain parts, the combination of
which doesn't exist. Fix them up.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The CMDQV interrupt on Tegra264 is edge-triggered per the hardware
interrupt documentation, but the binding example describes it as
level-triggered. Correct the example to use IRQ_TYPE_EDGE_RISING so
that it does not propagate the wrong trigger type.
Fixes: 8a59954192 ("dt-bindings: iommu: Add NVIDIA Tegra CMDQV support")
Reported-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Nicolin Chen <nicolinc@nvidia.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add nvidia,tegra264-vic compatible string for the VIC on Tegra264. VIC
on Tegra264 has a new RISC-V based microcontroller and improved image
processing capabilities.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260622-t264-host1x-v2-2-ff7364d9ff7b@nvidia.com
Add nvidia,tegra264-host1x compatible string. The Tegra264 host1x is
similar to Tegra234, but with a different set of engines and layout.
The engine register range is no longer continuous, so two range entries
are also needed.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260622-t264-host1x-v2-1-ff7364d9ff7b@nvidia.com
Document compatible for Qualcomm Eliza SoC LPASS LPI pin controller.
Eliza has the same pin mux functions as Milos but uses a different
slew rate register layout where the slew rate field is in the same
GPIO config register rather than a separate dedicated register. As a
result, Eliza only has a single reg entry instead of two.
Signed-off-by: Ravi Hothi <ravi.hothi@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260715132150.1322663-2-ravi.hothi@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The "gpio" trigger is used to control LEDs by the level of a GPIO input
referenced by the trigger-sources property. This is already documented
in the trigger-sources property description and is used in at least one
devicetree (am335x-regor.dtsi). Document it so validation of those and
future DTs will pass.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260711192842.845048-2-samuel@sholland.org
Signed-off-by: Lee Jones <lee@kernel.org>
The GDSCs provided by the Glymur GCC are supplied by the RPMh CX power
domain. Model that parent domain in the GCC binding so the provider can
describe the dependency in devicetree.
Add a single CX power-domain entry to the binding and make it required,
matching the hardware description needed by the GCC node.
Fixes: ee2d967030 ("dt-bindings: clock: qcom: document the Glymur Global Clock Controller")
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260715-glymur-fix-gcc-cx-scaling-v3-1-72eb5adad156@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Really add Sony IMX678 bindings this time. Those were accidentally missed
from commit 447ea0c26e ("dt-bindings: media: i2c: Add Sony IMX678") even
though the original patch included them.
Fixes: 447ea0c26e ("dt-bindings: media: i2c: Add Sony IMX678")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Jai Luthra <jai.luthra@ideasonboard.com>
Add Hawi SoC and its reference boards to the Qualcomm binding.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260617151602.2018579-1-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document the Sony Xperia M2, which is a smartphone based on the
Qualcomm MSM8926 SoC.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
Link: https://lore.kernel.org/r/20260610-yukon-eagle-v4-1-763d5698bd2c@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document the platforms that fallback to using the qcom,sa8775p-ctcu
compatible for probing.
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260204-enable-ctcu-and-etr-v3-1-0bb95c590ae1@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Vicharak Axon Mini is a single-board computer based on the
Qualcomm QCM6490 platform.
Add the top-level compatible string for this board.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ajit Singh <blfizzyy@gmail.com>
Link: https://lore.kernel.org/r/20260624125443.18729-3-blfizzyy@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Shikra is a Qualcomm IoT SoC available in a System-on-Module (SoM)
form factor. The SoM integrates the Shikra SoC, PMICs, and essential
passives, and is designed to be mounted on carrier boards.
Three eSoM variant are introduced:
- CQM: retail variant with integrated modem (PM4125 and PM8005 PMIC)
- CQS: retail variant without modem (PM4125 and PM8005 PMIC)
- IQS: industrial-grade variant without modem (PM8150 PMIC)
Each SoM variant pairs with a common EVK carrier board provides debug
UART, USB, and other peripheral interfaces.
Add compatible strings for the CQ2390M, CQ2390S, IQ2390S SoM variant and
its corresponding EVK boards.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260612-shikra-dt-v6-1-6b6cb58db477@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document the X1E-80-100 variant of the HONOR MagicBook Art 14.
Signed-off-by: Konstantin Shabanov <mail@etehtsea.me>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260629154812.9066-3-mail@etehtsea.me
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document the compatible strings for the Qualcomm Eliza CQS
System-on-Module (SoM) and its EVK board.
The SoM is populated with a CQ7790S Eliza variant, PMICs, LPDDR and
eMMC. The SoM is then connected to the EVK base board, which provides
a multitude of connectors for peripherals.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260630-eliza-dts-qcs-evk-v4-1-18cbbdba6e7e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The DT schema core defines the type ($ref) of 'firmware-name' property
as string-array, so individual schemas do not need to. They also should
not redefine it to a single string, but instead just set number of
expected firmware names.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260712145718.126492-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document compatible strings for the ADSP and CDSP Peripheral Authentication
Services on the Qualcomm Maili SoC. Both are compatible with the Qualcomm
SM8550 PAS and can fallback to SM8550 except for one additional interrupt
("shutdown-ack"). For CDSP, similar to Kaanapali, "global_sync_mem" is
not managed by the kernel.
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Yijie Yang <yijie.yang@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260615-remoteproc-v1-1-67721b4b052a@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The sensor supports output over either 2 or 4 CSI2 data
lanes. The binding only permitted the 4 lane configuration.
Add the 2 lane configuration as an option.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add compatible for MT8189 PCIe Gen3 controller, that is compatible with
the PCIe controller found in MT8192.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260701-mt8189-dt-bindings-pcie-v1-1-7c7a65087654@collabora.com
bui duc phuc <phucduc.bui@gmail.com> says:
This series contains a few small cleanups for the Tegra ASoC drivers.
- Use dev_err_probe() for regmap initialization failures.
- Return the original error from snd_soc_add_component_controls().
- Use devm_clk_get_optional() for the optional sync_input clock.
Overall, this simplifies the error paths and makes the code more
consistent.
Link: https://patch.msgid.link/20260715051115.17385-1-phucduc.bui@gmail.com
Define it as a new monochrome variant of vd65g4.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add the Qualcomm Shikra SoC compatible string for the CPU-to-DDR
bandwidth monitor. Shikra has a BWMONv5 for CPU.
Signed-off-by: Sayantan Chakraborty <sayantan.chakraborty@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Link: https://patch.msgid.link/20260714-shikra-dt-m1-v6-1-bee265d3499b@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Document Eliza BWMONs which has a BWMONv4 for CPU-LLCC and a BWMONv5 for
DDR-LLCC paths, same as SM8550.
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260708-bindings-llcc-bwmon-eliza-v1-1-3c7dbcbae87a@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Convert Microchip PIC32 Deadman Timer devicetree binding
from legacy text format to DT schema.
Signed-off-by: Udaya Kiran Challa <challauday369@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260701171917.263050-1-challauday369@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Convert Microchip PIC32 Watchdog Timer devicetree binding
from legacy text format to DT schema.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Udaya Kiran Challa <challauday369@gmail.com>
Link: https://patch.msgid.link/20260624055648.127399-1-challauday369@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add DT compatible strings for Variscite DART-MX8MM SoM and Variscite
development carrier Board.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Certain Apple SoCs include additional PMGR power states that are
controlled via a different "misc" control block. On existing SoCs, this
includes the fabric and memory controller state.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Finkelstein <k@chaosmail.tech>
Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com>
Link: https://patch.msgid.link/20260705-pmgr-misc-v3-1-51b75fed6f73@chaosmail.tech
Signed-off-by: Sven Peter <sven@kernel.org>
regression fixes) or quirks accumulated since the last update.
Some highlights:
* USB-audio:
- Fix per-channel volume imbalance regression for sticky mixers
- Validate input packet length in caiaq driver
- Quirks for iBasso DC-Elite, Musical Fidelity M6s DAC, and Redragon
H510-PRO Wireless headset
* HD-audio:
- Fix a long-standing bug of cached processing coefficient verbs
- Make cs35l56 driver failing with missing firmware
- Fix cirrus codec Kconfig dependency, update MAINTAINERS
- Remove unneeded mic bias threshold override on Conexant
- Realtek codec quirks for ASUS ROG Ally X (headphone & mic), Dell
QCM1255, Legion Pro 7, HP/Victus laptops, Framework, and TongFang
laptops
* ASoC:
- Add Eliza audio support on Qualcomm sc8280xp/sm8250 SoCs
- Fix SDCA linker error with ACP on AMD
- A few fixes for AMD ACP PCI driver
- Add TAS2783 support on AMD ACP 7.0 platforms
- Reset RT712-SDCA codec to fix silent headphone issue
- Soft reset S/PDIF datapath on Meson AIU FIFO
- Jack report fix for cs42l43
- TAS2562 shutdown GPIO clearing fix
- Sidecar amps quirk for Lenovo laptop in SOF SDW driver
* Misc:
- Drop redundant mod_devicetable.h includes from FireWire drivers
- Fix memory leak and format mismatch in mixer kselftest
-----BEGIN PGP SIGNATURE-----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=3e+T
-----END PGP SIGNATURE-----
Merge tag 'sound-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All are device-specific fixes (including
regression fixes) or quirks accumulated since the last update. Some
highlights:
USB-audio:
- Fix per-channel volume imbalance regression for sticky mixers
- Validate input packet length in caiaq driver
- Quirks for iBasso DC-Elite, Musical Fidelity M6s DAC, and Redragon
H510-PRO Wireless headset
HD-audio:
- Fix a long-standing bug of cached processing coefficient verbs
- Make cs35l56 driver failing with missing firmware
- Fix cirrus codec Kconfig dependency, update MAINTAINERS
- Remove unneeded mic bias threshold override on Conexant
- Realtek codec quirks for ASUS ROG Ally X (headphone & mic), Dell
QCM1255, Legion Pro 7, HP/Victus laptops, Framework, and TongFang
laptops
ASoC:
- Add Eliza audio support on Qualcomm sc8280xp/sm8250 SoCs
- Fix SDCA linker error with ACP on AMD
- A few fixes for AMD ACP PCI driver
- Add TAS2783 support on AMD ACP 7.0 platforms
- Reset RT712-SDCA codec to fix silent headphone issue
- Soft reset S/PDIF datapath on Meson AIU FIFO
- Jack report fix for cs42l43
- TAS2562 shutdown GPIO clearing fix
- Sidecar amps quirk for Lenovo laptop in SOF SDW driver
Misc:
- Drop redundant mod_devicetable.h includes from FireWire drivers
- Fix memory leak and format mismatch in mixer kselftest"
* tag 'sound-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (36 commits)
ALSA: usb-audio: Add delay quirk for iBasso DC-Elite
ALSA: hda: conexant: Remove mic bias threshold override
ALSA: hda/realtek: Fix speakers on Legion Pro 7 16ARX8H with codec SSID 17aa:38a7
ALSA: hda/realtek: Fix speakers on MECHREVO WUJIE Series
ALSA: hda: cs35l56: Fail if wmfw file is missing
ALSA: usb-audio: Skip DSD quirk for Musical Fidelity M6s DAC
ALSA: hda: MAINTAINERS: Fix missing cirrus* file reference
ALSA: hda/cirrus_scodec: Make Kconfig visible if KUNIT
ALSA: hda/realtek: Add quirk for TongFang X6xx45xU
ALSA: hda/realtek - Fixed Headphone noise issue for Dell QCM1255
ASoC: tas2562: fix deprecated 'shut-down' GPIO always cleared after lookup
ASoC: cs42l43: Correct report for forced microphone jack
ASoC: qcom: sc8280xp: Add support for Eliza
ASoC: dt-bindings: qcom,sm8250: Add Eliza sound card
ASoC: dt-bindings: qcom: Add Eliza LPASS macro codecs
ALSA: hda/realtek: Add mic mute LED quirk for HP Laptop 15-fd0xxx
ALSA: hda/realtek - Add quirk for HP Victus 15-fa0xxx (MB 8A50)
ALSA: usb-audio: Add quirk for Redragon H510-PRO Wireless headset
ASoC: amd: ps: replace bitwise OR with logical OR in IRQ return check
ASoC: amd: ps: fix wrong ACP version string in pci_request_regions()
...
Add compatible string fsl,imx8qm-sc-key for i.MX8QM and fallback to
fsl,imx-sc-key.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Qualcomm Shikra platform describes the BAM DMA node with 7 iommus
entries. The current schema limit to 6, so update the binding to allow
up to 7 entries.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20260714-b4-shikra_crypto_changse-v4-5-06a4ea97c209@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add a new compatible string for the PWM controller found on Tegra264.
The controller is similar to earlier generations but not compatible
with them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
[mperttunen: Drop extra Tegra194 compatible string]
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260701-t264-pwm-v6-1-2718f61f411f@nvidia.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Improve both the title and the description of this hardware to
disambiguate its functionality from a hardware mutex and/or from
a hwspinlock.
Though in datasheets this is called "DISP_MUTEX", the meaning is
is "Mute-X" (where "X" means "any hardware trigger signal") really
as this is what this piece of hardware does: muting or unmuting of
signals in each sub-IP of the display or other multimedia related
controllers.
Based on that, also clarify the description text, as to make sure
that the information is actually accurate.
While at it, also avoid forcing literal blocks in the description
as there is nothing in there needing that (no ascii graph or other
stuff that needs a literal block anyway), and add myself in the
list of maintainers.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Qualcomm Maili SoC has exactly the same RPMh power domains as Qualcomm
Hawi SoC. Add "qcom,maili-rpmhpd" string as a compatible entry for
"qcom,hawi-rpmhpd".
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmpUBDceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGgyoH/ivB80eG0N5qxekB
0w6Xwa5EXEcZrWOXFgYs+ur2D+KMIy8c1Q540ysYmu9OGjZjL+rtNE/czWsBtD57
9gv4Cxs1Ak+V3pfxXdwjeXzGZwtL0ysAmfbQAo5LeYbcwEmjCm26giU5pYlwqTf5
oggkS13GuDEtF/+2bTUFbBVPTMFd6xgZFAOLJkZrfNm3bGOWtqJRDVweVz0IR5Bv
ZVq1WvgrTpsf34ORrYXqyDtxIBxBRM9Dz5O2H5srOnG9yGtk691j1Ud6u8oftDBx
w0UYd1WQDaKYRM/A/mVGHgvwuk5dOThdN5IBXq6R9JC4QgBqFOk0srmJ6JtMWGw7
q8B/WiE=
=IBMl
-----END PGP SIGNATURE-----
Merge tag 'v7.2-rc3' into next
Sync up with mainline to pull in stable fixes to avoid merge conflicts.
On Qualcomm SoCs that support minidump, a word in always-on SRAM
is shared between the Operating System(HLOS) and boot firmware.
OS is expected to select the minidump download destination
either USB upload to a host PC or save to on-device storage.
Boot firmware will reads this word before DDR is initialized
on the warm reset following a crash to decide where to deliver
the minidump.
Add a 'sram' property to the SCM binding to allow the OS to
identify this SRAM region via a phandle.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260624190830.3131112-2-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
James Calligeros <jcalligeros99@gmail.com> says:
This series introduces a number of changes to the ASoC driver
for the Apple MCA peripheral to enable support for bidirectional
I2S. This is achieved by allowing frontends to act as clock consumers
and logically ORing data input lines when multiple backends are linked
to a frontend.
This allows the Texas Instruments speaker amps used on Apple Silicon Macs
(Apple-specific revisions of TAS2764 and TAS2770) to send their IVSENSE
data back to the SoC. Since these amps do not have any sort of integrated
speaker protection logic, we must use the IVSENSE data and the Thiele/Small
Parameters of the attached speaker(s) to implement our own in software.
Link: https://patch.msgid.link/20260711-apple-audio-redux-v4-0-2994d87c2f24@gmail.com
Add the compatible for the MMC controllers of the Rockchip RV1106,
which are compatible with the RK3288 variant.
Unlike the newer controller in the RV1103B, which uses the RK3576
fallback, the RV1106 controller is the older IP whose drive and sample
phases are set through clocks provided by the GRF, so the RK3288
fallback is the correct one here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Add support for the HFRPSYS direct control power domains in the
MT8196 SoC, controlling power for the DisplayPort and for the
Embedded DisplayPort Transmitter IPs.
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
The Kinetic Technologies KTS1622 is a 16-bit general-purpose I/O
expander via the I2C bus for microcontrollers when additional I/Os
are needed while keeping interconnections to the minimum. Datasheet
comparison suggests that it is compatible with TCAL6416, add the
compatible string and TCAL6416 as a fallback compatible.
Signed-off-by: Marek Vasut <marex@nabladev.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260711210131.236025-3-marex@nabladev.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The latest EDK version was 14.7 released in 2013 that's why remove
description for it. Also remove generic description for Ethernet which
doesn't bring any value.
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Add a dedicated compatible for the exynos8855-wakeup-eint node, which
is compatible with Exynos7 implementation.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://patch.msgid.link/20260627171228.2687857-5-alim.akhtar@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Document Inline Crypto Engine (ICE) on Qualcomm Nord SoC.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix the DT bindings for inline-crypto engine to require the UFS_PHY_GDSC
power-domain and iface clock on Qualcomm Hawi platform.
Fixes: d273b258d8 ("dt-bindings: crypto: qcom,inline-crypto-engine: Document Hawi ICE")
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Inline Crypto Engine found on Maili SoC is compatible with the common
baseline IP 'qcom,inline-crypto-engine' and requires the UFS_PHY_GDSC
power-domain and iface clock. Hence, document the compatible as such.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Maili SoC has the True Random Number Generator (TRNG) which is compatible
with the baseline IP "qcom,trng". Hence, document the compatible as such.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The board consists of a DLRV1126 carrier board and a CLRV1126F core
module based on the Rockchip RV1126 SoC.
Signed-off-by: Yanan He <grumpycat921013@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260706-rv1126-alientek-dlrv1126-v2-2-ff3176ca362b@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
UFS v5.0/UFSHCI v5.0 adds HS-G6 support (46.6 Gbps/lane) via UniPro v3.0
and M-PHY v6.0. These specs define TX Equalization for all High-Speed Gears
(not only HS-G6) to compensate channel loss and improve signal integrity at
high speed.
For HS-G6, M-PHY uses PAM4 1b1b line coding. Pre-Coding may also be
required depending on channel characteristics.
Document vendor-neutral properties in ufs-common.yaml:
- txeq-preshoot-g[1-6]
- txeq-deemphasis-g[1-6]
- tx-precode-enable-g6
Values are per-lane Host/Device tuples (2 values for x1, 4 values for
x2). PreShoot/DeEmphasis range from 0..7, and Precode is 0/1.
These are board-specific signal-integrity tuning values. They depend on
channel SI/PHY characterization and validation (host PHY, device PHY,
package, and board routing), and are determined by HW/PHY designers.
Although UFSHCI v5.0 supports TX Equalization Training via UniPro v3.0,
which allows host software to determine optimal TX Equalization at
runtime, static board-specific TX Equalization settings in the Device
Tree are still necessary because:
- TX Equalization Training is not supported for HS-G3 and below
- TX Equalization Training is disabled on some platforms
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Can Guo <can.guo@oss.qualcomm.com>
Link: https://patch.msgid.link/20260616113348.1168248-2-can.guo@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reverse the logic within "if:then:" when expecting "required-opps"
property to have negative list of only variants which do not require
these. VIDEOCC on SM8650 does not need "required-opps" as explained in
the commit 6720e8dbcb ("dt-bindings: clock: qcom: Drop required-opps
in required on sm8650 videocc"). Requirement on VIDEOCC on SM8475 is
not known.
Reverting the logic in "if:" part has two impacts:
1. Adds requirement of "required-opps" on VIDEOCC on Hamoa (X1E80100),
to match hardware expectation, similarly to existing its variant
X1P42100 (already expressed in DTS).
2. Reduces the chances of forgetting to update constraints when adding
new compatibles (like for X1E80100).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260708-dt-bindings-camcc-required-opps-v1-3-ae0871774210@oss.qualcomm.com
[bjorn: Rebased, assuming the newly added hawi compatible also requires opps]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Reverse the logic within "if:then:" when expecting "required-opps"
property to have negative list of only variants which do not require
these. CAMCC on SM8650 does not need "required-opps" as explained in
the commit db30c1160c ("dt-bindings: clock: qcom: Drop required-opps
in required on SM8650 camcc"). Requirement on CAMCC on SM8475 is not
known.
Reverting the logic in "if:" part has two impacts:
1. Adds requirement of "required-opps" on CAMCC on SM8750 to match
hardware expectation, because it needs minimum voltage levels of MMCX
rail (already expressed in DTS).
2. Reduces the chances of forgetting to update constraints when adding
new compatibles (like for SM8750).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260708-dt-bindings-camcc-required-opps-v1-2-ae0871774210@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
qcom,sc8280xp-camcc compatible was moved to own binding file in
commit 842fa74829 ("dt-bindings: clock: qcom,sm8450-camcc: Move
sc8280xp camcc to sa8775p camcc"), so cleanup redundant entry in
"if:then:" block.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260708-dt-bindings-camcc-required-opps-v1-1-ae0871774210@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Replace permanently bouncing email addresses (550 5.1.1 Recipient address
rejected) of Adam Skladowski, Chanho Park, Anusha Rao and Sireesh
Kodali. There are no new messages from them via other email addresses,
so drop them permanently. Add Alim Akhtar to Samsung ExynosAutov9 SoC
clocks, because he looks at other Samsung clock hardware and drivers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260623073050.36262-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device tree bindings for the camera clock controller on
Qualcomm Glymur SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260624-glymur_camcc-v5-1-a321df74b1a1@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The pin controller on Apple silicon M3 Pro, Max and Ultra SoCs is
compatible with the t8103 (M1) one. Add "apple,t6030-pinctrl" for M3 Pro
and "apple,t6031-pinctrl" for M3 Max and Ultra as per-SoC compatibles.
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Convention is to always have properties defined in top-level part of the
binding and then customized (narrowed per variant) in "if:then:" blocks.
The clock-names were mentioned only in such "if:then:" block for
atmel,at91rm9200-ohci, thus add the top-level part and disallow usage of
clock-names for other devices. This has no practical impact as
clock-names are not used by other variants, except in
hisilicon/hi3798cv200.dtsi, but that SoC has it undocumented.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260625091744.109467-4-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convention is to always have properties defined in top-level part of the
binding and then customized (narrowed per variant) in "if:then:" blocks.
The clock-names were mentioned only in such "if:then:" block for
atmel,at91sam9g45-ehci, thus add the top-level part and disallow usage
of clock-names for other devices. This has no practical impact as
clock-names are not used by other variants, except in
hisilicon/hi3798cv200.dtsi, but that SoC has it undocumented.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260625091744.109467-3-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are three USB controllers on mt8196, each controller's wakeup
control is different, add some specific versions for them, and add
compatilbe for mt8196.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://patch.msgid.link/20260413121727.4702-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
IPQ5210 includes a Qualcomm DWC3 USB controller supported by the existing
binding. Add its compatible string to the schema and include it in the
matching conditional constraints.
Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260604090528.735236-1-varadarajan.narayanan@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maili is a mobile platform that is compatible with Hawi and Kaanapali
platform with respect to pmic-glink support. Add Maili compatible string
with Kaanapali as a fallback.
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260610-maili-pmic-glink-v1-1-a6ba02d6deba@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
syscon-reboot-mode schema allows arbitrary "mode-.* properties but only
a subset actually makes sense and is valid. Provide negative look-ahead
pattern to disallow any modes not supported by the device, which
tightens the binding.
Most of Android-based Exynos devices share the bootloader or its parts,
thus reboot modes are most likely the same, however only a few upstream
DTS define them, so add restrictions only for these.
Google GS101 has on the other hand quite different bootloader with many
known reboot modes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260701105731.196618-4-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Each schema for a child node should end with either additionalProperties
or unevaluatedProperties, so add missing one making the schema tighter.
Defining 'type: object' is on the other hand not necessary when other
schema is referenced.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260701105731.196618-3-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Switch my maintainer entry for the Awinic AW99706 WLED backlight
driver from my personal Gmail address to junjie.cao@linux.dev.
Update both MAINTAINERS and the device-tree binding maintainers field.
Signed-off-by: Junjie Cao <junjie.cao@linux.dev>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260706073307.1038430-1-junjie.cao@linux.dev
Signed-off-by: Lee Jones <lee@kernel.org>
Add port property referencing audio-graph-port.yaml to allow DMIC to be
used with audio-graph-card and audio-graph-card2.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://patch.msgid.link/20260707065725.312450-4-chancel.liu@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add port property referencing audio-graph-port.yaml to allow MICFIL to
be used with audio-graph-card and audio-graph-card2.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://patch.msgid.link/20260707065725.312450-3-chancel.liu@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add port property referencing audio-graph-port.yaml to allow WM8524 to
be used with audio-graph-card and audio-graph-card2.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://patch.msgid.link/20260707065725.312450-2-chancel.liu@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Olivier Dautricourt has stepped down as maintainer of the Altera
msgDMA driver as he no longer has access to the hardware. Replace him
with Adrian Ng Ho Yin as the new maintainer and update the status
from "Odd Fixes" to "Maintained".
Signed-off-by: Adrian Ng Ho Yin <adrian.ho.yin.ng@altera.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/addaf51275355667045ec300fc8d725e2e273807.1782911845.git.adrian.ho.yin.ng@altera.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The USBHS IP block on RZ/G3L SoC is identitcal to the one found on the
RZ/G3S device. Document the RZ/G3L USBHS IP block.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260707145135.247565-2-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add bindings for Eliza sound card, which is compatible with
the existing SM8450.
Signed-off-by: Ravi Hothi <ravi.hothi@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260703073434.2589657-3-ravi.hothi@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add bindings for Qualcomm Eliza LPASS RX, TX, VA and WSA macro codecs,
which are compatible with the existing SM8550 generation.
Signed-off-by: Ravi Hothi <ravi.hothi@oss.qualcomm.com>
Link: https://patch.msgid.link/20260703073434.2589657-2-ravi.hothi@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The multi-letter extension enum is documented as being sorted
alphanumerically (see the "multi-letter extensions, sorted
alphanumerically" comment), but several Z entries have drifted out of
order.
Reorder the affected entries so the multi-letter Z list is sorted
alphanumerically again.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Guodong Xu <docular.xu@gmail.com>
Link: https://patch.msgid.link/20260701-rva23u64-hwprobe-v2-v5-1-2c61f94a695a@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Xiaomi 12 Lite 5G (xiaomi,taoyao) is a smartphone based on the SM7325
SoC.
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260608143329.252033-2-zstaseg@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add bindings documentation for RPM clock controller on Qualcomm Shikra SoC.
The Qualcomm Shikra RPMCC has the clocks same as Agatti (QCM2290) RPMCC.
Hence, add support to use the QCM2290 RPMCC compatible as fallback for
Shikra RPMCC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260608-shikra-gcc-rpmcc-clks-v5-1-94cefe092ee3@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add documentation for the Last Level Cache Controller (LLCC) bindings
for Qualcomm Maili SoC which is fully compatible with the one found on
Qualcomm Hawi.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260604-maili-llcc-v2-1-dd24f05bc197@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document the Always-on Subsystem side channel on Qualcomm Maili SoC.
Signed-off-by: Chunkai Deng <chunkai.deng@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260604-maili-soc-binding-v2-3-21b5e9bd1aa5@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On Qualcomm Maili platform, IMEM is a block of SRAM shared across
multiple IP blocks which can fall back to "mmio-sram". Document
its compatible.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260604-maili-soc-binding-v2-2-21b5e9bd1aa5@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
syscon-reboot-mode schema allows arbitrary "mode-.* properties but only
a subset actually makes sense and is valid. Provide negative look-ahead
pattern to disallow any modes not supported by the device, which
tightens the binding.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260701105849.197086-4-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The 'reboot-mode' child of PMU node must be a syscon-reboot-mode one, so
add missing $ref to enforce the validation and disallow other
reboot-mode handlers.
Defining 'type: object' is on the other hand not necessary when other
schema is referenced.
This can be further restricted to match hardware/firmware:
syscon-reboot-mode schema allows arbitrary "mode-.* properties but only
a subset actually makes sense and is valid. Provide negative look-ahead
pattern to disallow any modes not supported by the device, which
tightens the binding.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260701105849.197086-3-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The MAX310x is a family of one- (max3107, max3108), two- (max3109) and
four-channel (max14830) UARTs. The binding pulls in
/schemas/serial/rs485.yaml at the chip level, describing a single set of
RS-485 properties - enough for the single-channel parts, but a
multi-channel chip can wire RS-485 differently on each channel.
Split the binding per compatible:
- single-channel parts (max3107, max3108): the chip node is itself the
serial port and carries the RS-485 properties, as before;
- multi-channel parts (max3109, max14830): the chip node is only a
container and is no longer a serial node; each channel is a "serial@N"
subnode that carries the standard serial.yaml/rs485.yaml properties
(and may host a serial slave device). max3109 has channels 0-1,
max14830 has 0-3.
This avoids a chip node that is simultaneously a serial node and the
parent of serial nodes. The driver still reads chip-level RS-485 for
single-channel and legacy device trees, so existing users are unaffected.
Signed-off-by: Tapio Reijonen <tapio.reijonen@vaisala.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260615-b4-max310x-rs485-dt-v3-2-7e79f064bdd7@vaisala.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document the EPSS L3 interconnect provider binding for Qualcomm
Shikra SoC.
The Shikra EPSS L3 block is similar to existing Qualcomm EPSS/OSM L3
providers, but supports only up to 12 frequency lookup table entries.
Co-developed-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Signed-off-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260603-shikra_epss_l3-v3-1-3c2e0b796e78@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This series enables QoS configuration for QNOC type device which
can be found on X1E80100 platform. It enables QoS configuration
for master ports with predefined priority and urgency forwarding.
This helps in prioritizing the traffic originating from different
interconnect masters at NOC (Network On Chip).
The system may function normally without this feature. However,
enabling QoS helps optimize latency and bandwidth across subsystems
like CPU, GPU, and multimedia engines, which becomes important in
high-throughput scenarios. This is a feature aimed at performance
enhancement to improve system performance under concurrent workloads.
* icc-x1e80100
dt-bindings: interconnect: qcom,x1e80100-rpmh: add clocks property to enable QoS
interconnect: qcom: x1e80100: enable QoS configuration
Link: https://patch.msgid.link/20260527-x1e80100_qos-v2-0-305c6539e6d2@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Some interconnect nodes on X1E80100 have QoS registers located inside
a block whose interface is clock-gated. For those nodes, driver
must enable the corresponding clock(s) before accessing the
registers. Add the 'clocks' property so the driver can obtain
and enable the required clock(s).
Only interconnects that have clock-gated QoS register interface
use this property; it is not applicable to all interconnect nodes.
Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260527-x1e80100_qos-v2-1-305c6539e6d2@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add the register range and clock properties needed for programming NoC QoS
configuration on SC8280XP.
Require a register range for the real NoC providers, require QoS clocks for
aggre1_noc and aggre2_noc, and keep the virtual clk_virt and mc_virt
providers without MMIO resources or clocks.
Signed-off-by: Xilin Wu <sophon@radxa.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260507-sc8280xp-qos-v1-1-15135858cd98@radxa.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add a dedicated schema for the PCIe controllers found on the Hawi
and Maili platforms.
Signed-off-by: Matthew Leung <matthew.leung@oss.qualcomm.com>
[mani: added MAINTAINERS entry and squashed the Maili patch]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260625-hawi-pcie-v4-1-1a578603cd86@oss.qualcomm.com
Add device tree bindings for the video clock controller on Qualcomm
Hawi SoC.
Signed-off-by: Lin Li <zhuolin.li@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260702-hawi-videocc-v1-1-6c1e640b0954@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the device tree bindings for the enhanced video analytics(EVA) clock
controller which is required on Qualcomm Glymur SoC. The controller
provides clocks, resets and power domains for the EVA subsystem.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260617-evacc_glymur-v2-2-905108dacaaa@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The pm4125 PMIC uses a different USB VBUS register layout than pm8150b.
It uses a 2-bit VBOOST voltage selector supporting output voltages of
4.25 V, 4.5 V, 4.75 V and 5.0 V, instead of a current-limit selector.
Move qcom,pm4125-vbus-reg from the pm8150b fallback items list into the
standalone enum since the driver handles it with its own match-data and
register layout.
Make regulator-min/max-microamp conditional so they are only required
for current-limit variants (pm8150b, pm6150, pm7250b, pmi632). Add an
if/then condition for qcom,pm4125-vbus-reg requiring regulator-min/
max-microvolt instead, and update the pm4125 example accordingly.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Rakesh Kota <rakesh.kota@oss.qualcomm.com>
Link: https://patch.msgid.link/20260706-add_pm4125-vbus-reg-v3-1-999d78a87b81@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The OpenNMC is an open replacement for APC SmartSlot management cards
based on the Nagami System-on-Module.
Signed-off-by: Lukas Schmid <lukas.schmid@netcube.li>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260606205452.2386930-2-lukas.schmid@netcube.li
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmpK+lYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGsv8H/Rn7Hr3Hp8t6au8B
xQueZThJWjqQ4v8pyLnXF6OomKiDR24OTXMCrFgDkcmZ7RK2ALqowI3tQVwLUTuI
yUN0qL2z2y+LyTcO0CYf3Lple8KlgLAXYMsv7pGLsOvhS7BW2jW97/bcbpUNxoHb
eghxqbIEnyRImUbbyg+nW7VVk65RKdPUNkBPXfQ2NMVwe+SDE5Rl+NXNVqDNjGad
soDTUBrD9yXkWX+4s0myleE62UzzH5nYgGPQeQgYmzWgq7LybH6WBlbQK9D7ODJR
Cw3LCq1hwZZ2w04Yx+XwMHquGJYHW8L2pj77h95uhzksz8buKnM0AGwBCTC6RMoi
AyUQvdc=
=JUWl
-----END PGP SIGNATURE-----
Merge tag 'v7.2-rc2' into togreg
Linux 7.2-rc2
Done to resolve conflicts with header reorg around mod_devicetable.h
and provide a base for other inflight series that touch the includes.
Merge the mmc fixes for v7.2-rc[n] into the next branch, to allow them to
get tested together with the mmc changes that are targeted for the next
release.
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
MT8189 SoC MMC Controller IP has 4 additional clocks.
Describe them in the dt-bindings for this SoC.
Fixes: 7514f64780 ("dt-bindings: mmc: mtk-sd: Add support for MT8189 SoC")
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Convert STMicroelectronics sdhci-st MMC/SD controller binding from
text format to YAML DT schema.
Changes during conversion:
- Preserve optional 'icn' clock and 'top-mmc-delay' register region
via minItems: 1 on their respective properties.
- Conditionally require reg-names when two reg entries are present
via an allOf if/then block, preventing silent runtime failure in
devm_platform_ioremap_resource_byname().
- Constrain max-frequency to enum [200000000, 100000000, 50000000]
with a default of 50000000, matching the driver's behaviour in
sdhci-st.c.
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Add DT compatible strings for Variscite DART-MX8MP SoM and Variscite
development carrier Board.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add a new rtc compatible for the sun60i-a733 SoC and new IDs for the
peripheral oscillator clock gates of this SoC.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20260706-a733-rtc-v4-2-f330728db3d3@baylibre.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
On h616 and r329 chips, clock output names are never defined through DT and
are not meant to be. Just disallow the property for those chips.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: http://lore.kernel.org/r/20260629125305.0DF981F000E9@smtp.kernel.org
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20260706-a733-rtc-v4-1-f330728db3d3@baylibre.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Convert the Texas Instruments MMC host controller bindings
to DT schema.
Note that the OMAP2420 driver will not work with OMAP2430 or later omaps.
Please see the OMAP HSMMC driver for current OMAPs.
Signed-off-by: Eduard Bostina <egbostina@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Runyu Xiao <runyu.xiao@seu.edu.cn> says:
Both cs35l33 and cs35l34 can enter runtime suspend while their threaded
IRQ handlers are still reachable. The suspend path then switches the
driver into regcache cache-only mode and powers the codec down, while
the IRQ thread still expects live status-register access.
This issue was found by our static analysis tool and manually audited on
Linux v6.18.21. Directed QEMU no-device validation further showed that,
after runtime_suspend() completed, the real threaded handlers could
still be injected and would continue past volatile regmap read failures
into their release/update paths.
This series keeps the fix on the suspend actor and applies the same
runtime-suspend/threaded-IRQ ordering repair boundary to both drivers:
- track whether request_threaded_irq() actually succeeded
- disable_irq() before cache_only/power-off in runtime suspend
- enable_irq() only after regcache_sync() in runtime resume
That drains any in-flight threaded handler and blocks new IRQ handling
while the codec is suspended, without mixing in larger IRQ-thread
defensive cleanups.
Build-tested by compiling cs35l33.o and cs35l34.o.
No cs35l33/cs35l34 hardware was available for end-to-end runtime
testing.
Link: https://patch.msgid.link/20260611161553.3378721-1-runyu.xiao@seu.edu.cn
Praveen Talari <praveen.talari@oss.qualcomm.com> says:
The Qualcomm automotive SA8255p SoC relies on firmware to configure
platform resources, including clocks, interconnects and TLMM.
The driver requests resources operations over SCMI using power
and performance protocols.
The SCMI power protocol enables or disables resources like clocks,
interconnect paths, and TLMM (GPIOs) using runtime PM framework APIs,
such as resume/suspend, to control power states(on/off).
The SCMI performance protocol manages SPI frequency, with each
frequency rate represented by a performance level. The driver uses
geni_se_set_perf_opp() API to request the desired frequency rate.
As part of geni_se_set_perf_opp(), the OPP for the requested frequency
is obtained using dev_pm_opp_find_freq_floor() and the performance
level is set using dev_pm_opp_set_opp().
Link: https://patch.msgid.link/20260618-enable-spi-on-sa8255p-v4-0-f5b5067e7e1e@oss.qualcomm.com
Add DT bindings for the QUP GENI SPI controller on sa8255p platform.
SA8255p platform abstracts resources such as clocks, interconnect and
GPIO pins configuration in Firmware. SCMI power and perf protocols are
utilized to request resource configurations.
SA8255p platform does not require the Serial Engine (SE) common properties
as the SE firmware is loaded and managed by the TrustZone (TZ) secure
environment.
Co-developed-by: Nikunj Kela <quic_nkela@quicinc.com>
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://patch.msgid.link/20260618-enable-spi-on-sa8255p-v4-1-f5b5067e7e1e@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On newer Qualcomm SoCs (starting with sc7280/kodiak), ICE is modelled
as a dedicated DT node. Add the optional qcom,ice phandle to reference
that node from the SDHCI controller.
When qcom,ice is present, disallow an embedded ICE register region in
the SDHCI node to avoid double modelling. Older SoCs without qcom,ice
remain valid.
Co-developed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Co-developed-by: Abhinaba Rakshit <abhinaba.rakshit@oss.qualcomm.com>
Signed-off-by: Abhinaba Rakshit <abhinaba.rakshit@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Neeraj Soni <neeraj.soni@oss.qualcomm.com>
Signed-off-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
A small set of fixes that came in since -rc1, we have one core fix for
shutting down target mode properly if the system suspends while it's
running plus a small set of fairly unremarkable device specific fixes.
There's also a couple of pure DT binding changes for Renesas SoCs, the
power domains one allows some SoCs to be correctly described with
existing code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmpKRNUACgkQJNaLcl1U
h9DGTAf9GNwul6yPo0ybe0uwbkuymsUhkf6oWz8qVPY4nFiQfP+pGiFae7gJrST7
gCeyTlqPT2549MpxgsJwxCdsAaX4VuJbdwY1U8OVeg5VCtVmv/geDweJBXax5uHR
EKayi1W8wGrdt+xReDvbcqS9T+kwyRWxrrWRi7HIz7P4Lbziq8naQaPQ6LODnHnT
h5/M9nr4VjQh+kSHIIOyHlN10hQR256XRHoZY6e7yQmJfzxayN9NTw7MmIw7kE3P
ZztQT8VcqaT4hlsJYZKLC9anSeWz03aTnJ3lPpKy935Od1PktElGEV6SLgbX/hEZ
QI6rjVNbe3UT5fiy+PjMDSl67II+DA==
=wCwg
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small set of fixes that came in since -rc1, we have one core fix for
shutting down target mode properly if the system suspends while it's
running plus a small set of fairly unremarkable device specific fixes.
There's also a couple of pure DT binding changes for Renesas SoCs, the
power domains one allows some SoCs to be correctly described with
existing code"
* tag 'spi-fix-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: rzv2h-rspi: Fix DMA transfer error handling for signal interruption
spi: dt-bindings: snps,dw-apb-ssi: add 'power-domains' property
spi: dt-bindings: snps,dw-apb-ssi: drop superfluous RZ/N1 entry
spi: dw: use the correct error msg if request_irq() fails
spi: dw: fix first spi transfer with dma always fallback to PIO
spi: core: Abort active target transfer on controller suspend
spi: sh-msiof: abort transfers when reset times out
The AD3532R/AD3532 is a 16-channel version of the AD3530R/AD3530.
This adds compatible strings for the AD3532R/AD3532.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Convert the Texas Instruments OMAP HDQ One Wire bindings to DT schema.
During the conversion, several updates were made to reflect actual hardware
usage and resolve dtbs_check warnings:
- 'ti,hwmods' has been made optional.
- Added 'clocks' and 'clock-names' properties as they are used in actual
device trees (e.g., am437x-l4.dtsi).
- Added a second example for the AM4372 HDQ controller to demonstrate
the clock and interrupt configuration.
Signed-off-by: Eduard Bostina <egbostina@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260630124826.2992529-1-egbostina@gmail.com
[krzk: Rename node names to onewire to match convention, fix path in omap-hdq.rst]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
I was dropped as maintainer because emails to my previous address
were bouncing. I have not stepped down from maintainership, so
re-add me with my current email address.
Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
A few of the ROHM PMICs have a state-machine corrsponding to the SOC
power-states. Idea is that by changing the PMIC state, all power-outputs
will be switched to a pre-defined state. As an example, the SOC may use
a low-power state when system is suspended, and when transitioning from
the normal operation to suspend, the PMIC can be told to go to
SUSPEND-state - which will then switch outputs of all power-rails to
pre-defined low-power state matching the SOC expectation for SUSPEND.
In addition to the SUSPEND, there are a few other states as well.
The voltage values & enable / disable -states matching the SOC
expectations can be set for the PMIC states using
rohm,dvs-<state>-voltage -properties. It all started with the BD71837
supporting this, but over the years these same properties have been used
for a few other PMICs, and seems like this HW-state machine design is not
going away.
Copying the descriptions and types in each PMIC specific binding, and
discussing them during the reviews is getting tedious for the reviewers
and author(s) alike. Furthermore, having separate descriptions makes it
very easy to add errors, or differing, and even contradicting
documentation for properties with same name.
Avoid these issues by using one common file for the common ROHM PMIC
state-machine definitions and only referencing this from the individual
PMIC bindings.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Suggested-by: Rob Herring <robh@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/akZGe1CaQFDd3idm@mva-rohm
Signed-off-by: Mark Brown <broonie@kernel.org>
ILI7807S is a DSI display controller used to drive MIPI-DSI panels.
The DLC DLC0697 1080x1920 LCD panel is based on this controller.
The panel requires a reset GPIO, I/O voltage supply (vddi), positive
LCD bias supply (avdd) and negative LCD bias supply (avee). The panel
operates in video burst mode with four data lanes using RGB888 pixel
format.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Arpit Saini <arpit.saini@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260701-ili7807s-v4-1-c7d76d4780a5@oss.qualcomm.com
Add compatible for Qualcomm's glymur IMEM, a block of sram which
can fall back to mmio-sram.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ananthu C V <ananthu.cv@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260424-glymur-imem-v5-1-18ede63cf063@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Binbin Zhou <zhoubinbin@loongson.cn> says:
This series adds ASoC support for the Loongson-2K0300 SoC and its
associated development boards, including the CTCISZ Forever Pi and the
ATK-DL2K0300B.
Key changes:
- Extend DT bindings to support ls2k0300-i2s and new audio card
compatibles.
- Refactor the platform I2S driver to handle SoC differences via per-device
configuration (rev_id, optional APB DMA config, reset sequence).
- Refactor the audio machine driver to support board-specific DAI formats,
GPIO-based headphone detection/control, speaker enable, and DAPM routing.
- Add jack detection and automatic switching between headphones and
speakers for the DL2K0300B board.
The patchset also cleans up the existing audio card binding by
referencing the common sound-card properties, and adds new compatibles
for the Loongson-2K0300 variants with proper DAI format handling.
All changes have been tested on Loongson-2K2000 (PCI), Loongson-2K0300
Forever Pi and Loongson-2K0300 DL2K0300B boards.
Link: https://patch.msgid.link/cover.1782439646.git.zhoubinbin@loongson.cn
Add a new compatible string `loongson,ls2k0300-forever-pi-audio-card`
for the audio card on Loongson-2K0300 ctcisz forever pi SoC. It uses a
different DAI format compared to existing Loongson platforms.
The existing "loongson,ls-audio-card" remains valid for LS7A,
Loongson-2K1000 and Loongson-2K2000.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/183d809cd51874bcb78743273e4b7617f120fedb.1782439646.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new compatible string `loongson,ls2k0300-i2s` for the I2S
controller found on Loongson-2K0300 SoC.
Unlike Loongson-2K1000, Loongson-2K0300 does not require the second
register region for APB DMA configuration, so update the binding to
allow a single reg entry.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/af092f9eabdc170c3d7951b29eee6512f748eb48.1782439646.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The YY3588 is a single board computer based on the Rockchip RK3588.
Add devicetree binding documentation for it.
Signed-off-by: Daniele Briguglio <hello@superkali.me>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260610-yy3588-board-v1-2-4bb7176b6826@superkali.me
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Document the Silergy SY7758 6-channel High Efficiency LED Driver
used for backlight brightness control.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20260529-topic-sm8650-ayaneo-pocket-s2-sy7758-v5-1-03aacd49747c@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
The only variant supported by the binding now, the DC8200 controller on
T-Head TH1520, requires three reset lines.
Add the reset properties to the required list to clarify this. The
in-tree th1520.dtsi file isn't affected by this change because the reset
lines are already populated there.
The driver still considers the resets optional, so if another variant
with no reset line appears, only the binding needs tweaking.
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260702054804.164820-1-zhengxingda@iscas.ac.cn
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add devicetree binding for the AMD/Xilinx Versal System Monitor (SysMon).
The Versal SysMon is the successor to the Zynq UltraScale+ AMS block,
providing on-chip voltage and temperature monitoring. The hardware
supports up to 160 supply voltage measurement points and up to 64
temperature satellites distributed across the SoC, with configurable
threshold alarms and oversampling. The device can be accessed via
memory-mapped I/O or via an I2C interface.
Supply and temperature channels are described as child nodes under
container nodes, referencing the standard adc.yaml binding for
channel properties.
Co-developed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Salih Erim <salih.erim@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The MediaTek mt6323 PMIC includes an AUXADC used for battery voltage,
temperature, and other internal measurements. The IP block is not
register-compatible with mt6359.
Add the devicetree binding documentation and the associated header file
defining the ADC channel constants.
Also change the description to 'MT6350 series and similar' because
the binding already includes more than mt635x series PMICs.
Finally, add the MAINTAINERS entry for the header with ADC constants.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Roman Vivchar <rva333@protonmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Bump the maxItems from 16 to 17 for all qcom,ports-* properties to
accommodate SoundWire controllers v3.1.0 with 17 data ports.
WSA instances on Glymur has 6 DIN and 11 DOUT ports.
Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260701163115.3701298-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add the compatible string for the APDMA IP found in MT8189 SoC,
that supports 35-bits addressing as MT6985 SoC.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260701-mt8189-dt-bindings-uart-dma-v1-1-c7106216a40d@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document SoCCP remote processor used on Qualcomm Hawi and Maili SoC which
is fully compatible with Kaanapali.
Co-developed-by: Yijie Yang <yijie.yang@oss.qualcomm.com>
Signed-off-by: Yijie Yang <yijie.yang@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260623-knp-soccp-v7-4-1ec7bb5c9fec@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document the component used to boot SoCCP on Kaanapali SoC and add
compatible for Glymur SoCCP which could fallback to Kaanapali. Extend
the "qcom,smem-states", "qcom,smem-state-names" in the pas-common
and add maxItems constraints for SMEM properties in the documents
that reference to pas-common.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260623-knp-soccp-v7-3-1ec7bb5c9fec@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Move interrupts and interrupt-names list out of pas-common since they
will be redefined differently for Kaanapali SoCCP.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260623-knp-soccp-v7-2-1ec7bb5c9fec@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Items in qcom,adsp.yaml has common clock and interrupt properties, move
these out of the allOf section to avoid list the compatible repeatly.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260623-knp-soccp-v7-1-1ec7bb5c9fec@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Only few Qualcomm IMEM devices actually provide interface for setting
reboot modes, but top-level schema allows "reboot-mode" child for
everyone. Narrow this to specific compatibles.
syscon-reboot-mode schema allows arbitrary "mode-.* properties but only
a subset actually makes sense and is valid. Provide negative look-ahead
pattern to disallow any modes not supported by the device, which
tightens the binding even more.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260701105832.197036-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The TMP119 has the same register layout as the TMP117, and a better local
sensor accuracy. Add a compatible for it.
Use ti,tmp117 as a fallback compatible for ti,tmp119.
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Extend the S32G2 SIUL2 pinctrl binding to describe the GPIO data and
external interrupt resources present in the same SIUL2 hardware block.
Besides the MSCR and IMCR registers used for pin multiplexing and pad
configuration, SIUL2 also contains PGPDO and PGPDI registers
for GPIO data and EIRQ registers for external interrupt control.
Add GPIO controller properties because the SIUL2 block also provides
GPIO functionality, and gpio-ranges are needed to describe the
mapping between GPIO lines and pin controller pins.
Document the interrupt controller properties. The SIUL2 block
contains EIRQ hardware as part of the same register space. IRQ support
itself will be added in a follow-up patch series.
Update the example accordingly to show the complete SIUL2 register
layout, including the GPIO data and EIRQ register windows.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Khristine Andreea Barbulescu <khristineandreea.barbulescu@oss.nxp.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
"xlnx,irq-delay" programs an 8-bit delay field in the DMA control
register, and the driver stores and reads it as a byte. The binding
described the property as a uint32 cell, which made the helper type
check report the driver as wrong.
Document "xlnx,irq-delay" as uint8 so the generated schema reflects
the hardware field width and the existing driver access.
Assisted-by: Codex:gpt-5-5
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://patch.msgid.link/20260612215226.1887726-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The DT schema conversion incorrectly changed xlnx,flush-fsync from a u32
property to a boolean. The original binding documented values 1, 2, and 3
to select which VDMA channel(s) flush on frame sync.
Restore the uint32 type with the documented enum values and fix the
example accordingly.
Fixes: 2d5c2952b9 ("dt-bindings: dma: xlnx,axi-dma: Convert to DT schema")
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260625161016.1249570-1-suraj.gupta2@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add DT bindings for the QUP GENI I2C controller on sa8255p platforms.
SA8255p platform abstracts resources such as clocks, interconnect and
GPIO pins configuration in Firmware. SCMI power and perf protocol
are utilized to request resource configurations.
SA8255p platform does not require the Serial Engine (SE) common properties
as the SE firmware is loaded and managed by the TrustZone (TZ) secure
environment.
Co-developed-by: Nikunj Kela <quic_nkela@quicinc.com>
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260617-enable-i2c-on-sa8255p-v7-1-ad736dbeab57@oss.qualcomm.com
Convert the Altera SoftIP I2C Controller bindings from legacy text
format to modern dt-schema (YAML).
The hardware constraints and properties remain identical. The example
node was updated to use a standard 32-bit address space to clear
compilation warnings.
Signed-off-by: Chaitanya Sabnis <chaitanya.msabnis@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260505053201.5795-1-chaitanya.msabnis@gmail.com
Convert the LSI Axxia I2C Controller bindings from legacy text
format to modern dt-schema (YAML).
During the conversion, the obsolete `device_type = "i2c"` property
was dropped from the example, as it is deprecated and not utilized
by the driver. The `clock-names` property is enforced as required
matching the driver probe behavior. The example node address was
also updated to a standard 32-bit address.
Signed-off-by: Chaitanya Sabnis <chaitanya.msabnis@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260505100854.5258-1-chaitanya.msabnis@gmail.com
The Top Level Mode Multiplexer (TLMM) in the Qualcomm Maili SoC provides
GPIO and pinctrl functionality for UFS, SDC and 226 GPIO pins.
Add a DeviceTree binding to describe the TLMM block on Qualcomm's Maili
SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Acked-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260622-maili-pinctrl-v3-1-9724e1000471@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The list is out of sync, so add missing entries, remove obsolete
entries and sort.
Signed-off-by: Sean Young <sean@mess.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The i.MX95 PCIe controller introduces three additional dedicated hardware
interrupt lines for specific events:
- intr: general controller events
- aer: Advanced Error Reporting events
- pme: Power Management Events
These interrupts are optional on i.MX95. PCIe basic functionality
(enumeration, configuration, and data transfer) works correctly without
them, as the controller can operate using only the existing MSI interrupt.
Earlier i.MX PCIe variants (imx6q, imx6sx, imx6qp, imx7d, imx8mm, imx8mp,
imx8mq, imx8q) do not have these three dedicated interrupt lines.
Update the binding to allow up to 5 interrupts for i.MX95, while
restricting earlier variants to a maximum of 2 interrupts using
conditional constraints (if/then schema). This ensures the schema
accurately reflects the hardware capabilities of each SoC variant.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260618092100.3669556-2-hongxing.zhu@oss.nxp.com
Convert CS35L36 Speaker Amplifier to yaml.
Changes:
- maintainers email to the generic Cirrus email
- Both the codec and downstream worked just fine without
VP-supply provided. Align with datasheet for similar models.
- add dai-common.yaml to cover for '#sound-dai-cells',
'sound-name-prefix'
- updated not yet implemented:
cirrus,weak-fet-delay -> cirrus,classh-wk-fet-delay-ms
(in both definition and example)
cirrus,weak-fet-thld -> cirrus,weak-fet-thld-millivolt
(only in the example)
- added two required properties:
cirrus,boost-ctl-millivolt
cirrus,boost-peak-milliamp
Assisted-by: OpenAI:gpt-4
Reviewed-by: David Rhodes <David.Rhodes@cirrus.com>
Co-developed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260624-dt-cirrus-cs35l36-v3-1-ec451d5a2908@ixit.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
This SPI controller likely belongs to a power domain for all the SoCs
listed. For sure, it belongs to one on the Renesas RZ/N1 SoC, so
enable the property to be able to describe its power domain in DTs.
Suggested-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260626180326.9593-3-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 164c05f03f ("spi: Convert DW SPI binding to DT schema") added
an RZ/N1 entry which was not in the original txt-file. It doesn't follow
the usual "<soc entry>, <soc family entry>" style for Renesas SoCs which
was properly added later with commit 029d32a892 ("spi: dw-apb-ssi:
Integrate Renesas RZ/N1 SPI controller"). In that commit, removing the
bogus entry was overlooked and is finally done now.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260626180326.9593-2-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
I'm leaving Imagination; remove myself as a maintainer. A separate patch
leaves a personal forwarding address in the .mailmap.
Acked-by: Matt Coster <opensource@mtcoster.net>
Acked-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260629-goodbye-v1-2-3bab53a80c53@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Convert the Xen ARM device tree binding documentation from the legacy
plain-text format (Documentation/devicetree/bindings/arm/xen.txt) to
the DT schema format, as required by the modern DT binding process.
The "hypervisor" node is named without a unit-address. The name is part
of the Xen ABI and is matched verbatim by the kernel using strcmp() in
arch/arm/xen/enlighten.c and arch/arm64/kernel/acpi.c. Allow a
unit-address so this can be addressed and the dtc warnings can be
avoided in the example.
Signed-off-by: Tejas Mutalikdesai <tejasmutalikdesai@gmail.com>
Link: https://patch.msgid.link/20260618151147.9438-1-tejasmutalikdesai@gmail.com
[robh: Allow a unit-address]
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add support for the PCIe controller found on the Renesas RZ/V2H(P) SoC.
The RZ/V2H(P) controller is similar to the RZ/G3E variant but includes
additional registers and configuration bits for PCIe lane control. It
supports multilink operation configured as either a single x4 link
or two independent x2 link controllers.
Unlike earlier SoCs supported by this driver which only feature a single
PCIe controller, the RZ/V2H(P) SoC implements two controllers. Both
instances rely on the system controller (SYSC) for configuration, but
the required registers reside at different offsets for each controller.
To correctly identify the controller instance and map the corresponding
system controller registers, update the "renesas,sysc" property to a
phandle-array. For the RZ/V2H(P) SoC, require an accompanying cell to
specify the controller instance index (0 or 1). For all earlier SoCs,
strictly restrict the property to a single phandle with zero argument
cells.
Additionally, make the "num-lanes" property mandatory for this SoC and
restrict its values according to the hardware capabilities.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260629220932.861445-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Update the binding documentation to include the compatible string for
PMG1110 PMIC which is used on Maili platform.
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260610-pmg1110-gpio-v1-1-a9c50cd8b5d9@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
There is no use of double colon '::' in YAML. OTOH, the literal style
block, e.g. using '|' treats all characters as content [1] therefore
single use of ':' in descriptions is perfectly fine, whenever '|' is
used.
Cleanup existing code, so the confusing style won't be re-used in new
contributions.
Link: https://yaml.org/spec/1.2.2/#literal-style [1]
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patch.msgid.link/20260623054842.21831-4-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
There is no use of double colon '::' in YAML. OTOH, the literal style
block, e.g. using '|' treats all characters as content [1] therefore
single use of ':' in descriptions is perfectly fine, whenever '|' is
used.
Cleanup existing code, so the confusing style won't be re-used in new
contributions.
Link: https://yaml.org/spec/1.2.2/#literal-style [1]
Acked-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://patch.msgid.link/20260623054842.21831-3-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The TRST signal of the JTAG master is optional and may not be wired on
every design, but it is only selectable as part of the JTAGM1 group,
which forces the D12 ball to be muxed whenever the JTAG master is used.
Add a separate JTAGM1TRST group so boards can enable TRST independently
of the other JTAG master signals.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add the IPQ9650 PCIe compatible to the IPQ9574 binding, as the IPQ9650
controller is compatible with IPQ9574 and uses it as the fallback.
While at it, make the global interrupt as required for IPQ9650.
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260610-ipq9650_pcie_binding-v2-1-69e27a1fbf1c@oss.qualcomm.com
RZ/V2H, RZ/V2N, and RZ/G3E support two optional external audio clock
inputs (AUDIO_CLKB and AUDIO_CLKC) that can be used by the Audio Clock
Generator (ADG) to derive internal audio clocks. The third ADG input
(AUDIO_CLKA) is fed internally by the AUDIO_EXTAL pin and does not need
a separate binding entry.
Update the bindings to allow these optional clocks for all RZ/V2H family
SoCs.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260525110603.4018170-2-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add supplies for VDD, VLOGIC and VREF input voltage pins. The vcc-supply
property is deprecated, once it does not really exist as none of the
devices describe any power input with that name. VCC is also misleading as
it sounds like the input power supply, but it is being used as an external
voltage reference, which should be called VREF. Certain devices require
vref-supply to be available once an internal reference voltage is absent.
For correct operation vdd and vlogic supplies are required.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add GPIO property for RESET, LDAC and GAIN pin. RESET is active-low, LDAC
is used to load DAC channels with values from input registers and GAIN
can double the voltage in output channels. The gain-gpios property is
not available to all supported parts. The adi,range-double property
indicates that GAIN pin is hardwired to high in case gain-gpios is not
set, otherwise it sets the initial value for the gain setting.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add supplies for VDD, VLOGIC and VREF input voltage pins. The vcc-supply
property is deprecated, once it does not really exist as none of the
devices describe any power input with that name. VCC is also misleading as
it sounds like the input power supply, but it is being used as an external
voltage reference, which should be called VREF. Certain devices require
vref-supply to be available once an internal reference voltage is absent.
For correct operation vdd and vlogic supplies are required.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add GPIO property for RESET, LDAC and GAIN pin. RESET is active-low, LDAC
is used to load DAC channels with values from input registers and GAIN
can double the voltage in output channels. The gain-gpios property is
not available to all supported parts. The adi,range-double property
indicates that GAIN pin is hardwired to high in case gain-gpios is not
set, otherwise it sets the initial value for the gain setting.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add devicetree binding for the QST QMC5883L 3-Axis Magnetic Sensor
connected via I2C.
Used enum so that more devices could use this binding
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Siratul Islam <siratul.islam@linux.dev>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Document the optional RATE pin GPIO used to select the HX711 output
data rate.
Update the example to show the property in use.
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Document the optional VSUP supply used by the HX711 on-chip regulator.
Also document the DVDD digital supply. DVDD is a board-supplied digital
input rail (figure 1 of the datasheet shows it as a separate supply, not
merely a bypass capacitor point) that was missing from the original
binding.
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
TQMa8MPxS is a SOM family using NXP i.MX8MP CPU family.
MB-SMARC-2 is an evaluation mainbord for this SOM
The SOM needs a mainboard, therefore we provide two compatibles here:
"tq,imx8mp-<SOM>" for the module and
"tq,imx8mp-<SOM>-<SBC>"
Signed-off-by: Paul Gerber <paul.gerber@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
i.MX93 SoC mediamix blk-ctrl contains one LDB_CTRL register and one LVDS
register which control video output through a LVDS interface. Allow the
LVDS Display Bridge(LDB) child node and add the child node to example.
i.MX93 LDB child node(bridge@20) is an addressable node, while i.MX93
Parallel Display Format Configuration(PDFC) child node(dpi-bridge) is a
non-addressable node. Mixing the addressable and non-addressable child
nodes is allowed according to discussion [1].
Link: https://lore.kernel.org/all/n6akxiayi3g6gxcqhreb4iaohmeokoalnqup6h5r2fwdt4zijt@u2wyps55ayqm/ [1]
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
DT-bindings for ADF41513, an ultralow noise PLL frequency synthesizer that
can be used to implement local oscillators (LOs) as high as 26.5 GHz.
Some properties are based upon an existing PLL device properties
(e.g. ADF4350).
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
IPQ9650 has two REFGEN blocks which provide reference current to the PCIe,
USB and UNIPHY PHYs. Unlike other supported platforms, IPQ9650 requires the
REFGEN clocks to be enabled explicitly.
Document the IPQ9650 compatible and the required clocks for it.
While at it, move the allOf block after the 'required' property section.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260617-ipq9650_refgen-v4-2-c505ea6c6661@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
STM32 QSPI may be in a power domain. Allow a single 'power-domains'
entry for STM32 QSPI.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260618-add_power_domain_for_qpsi-v1-1-4d7e57bcfb9a@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the mtk-btcvsd-snd.txt DT binding to DT Schema format.
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260615185810.11804-1-l.scorcia@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add bindings for the high-speed peripherals clock and reset generator
on the ESWIN EIC7700 HSP.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Xuyang Dong <dongxuyang@eswincomputing.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
The stmmac hardware on Agilex5 supports 8 TX/RX queue pairs and is
dma-coherent. Update the schema to handle the hardware differences
between SoC variants.
Also make 'interrupts' and 'interrupt-names' as required properties.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
v2: Set the top level interrupts to include the widest contraints(1-17)
Just have 1 list of all interrupt-names
Update commit message to include 'interrupts' and 'interrupt-names'
as required properties
Change minItems 1 to maxItems 1 for non agilex5 variants
Add same constraint for interrupt-names
The Allwinner A100/A133 SoCs have an LRADC which is compatible with the
versions in existing SoCs. Add a compatible string for A100, with the R329
fallback.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260623204824.691832-5-alexander.sverdlin@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Baijie HelperBoard A133 is a development board around their A133 Core
board. Introduce a compatible for both the Core and the development
boards.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://patch.msgid.link/20260623204824.691832-4-alexander.sverdlin@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Shenzhen Baijie Technology Co., Ltd. focuses on R&D and production of
embedded products as well as customization of embedded solutions.
Link: https://szbaijie.com/
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Paul Kocialkowski <paulk@sys-base.io>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://patch.msgid.link/20260623204824.691832-3-alexander.sverdlin@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
These entries were previously unaligned with MAINTAINERS, but will be
even more so now that entries are being changed there. Bring them in
sync by replacing the list here with the updated one from MAINTAINERS.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Acked-by: Luigi Santivetti <luigi.santivetti@imgtec.com>
Link: https://patch.msgid.link/20260626-maintainer-updates-v2-3-e1b3f246c44c@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
The Realtek Otto SoC interrupt controller supports hardware interrupt
routing to multiple parent CPU interrupt lines. To utilize this
multi-domain support, peripheral devices need a way to explicitly
specify their desired parent interrupt line in the device tree.
Update the "#interrupt-cells" property to accept either 1 or 2 cells.
1 cell: Specifies the hardware interrupt index, implicitly routing it
to the first available parent (maintaining backward compatibility).
2 cells: The first cell specifies the hardware interrupt index and
the second cell specifies the targeted parent interrupt index.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260605211646.2101652-2-markus.stockhausen@gmx.de
Add the SoC and board compatible strings for the Intel SoCFPGA
Agilex72 platform.
Signed-off-by: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Add hsi0 compatible on samsung,exynos-sysreg
To support ExynosAutov920 PCIe settings:
- PCIe PHY power control
- PLL settings for PCIe
- PCIe device direction (RC/EP)
Signed-off-by: Sanghoon Bae <sh86.bae@samsung.com>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260610050326.2903402-2-sh86.bae@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The compatible entries in qcom.yaml were not in alphabetical order by
their base SoC compatible string (the last const: qcom,* in each block),
making the file harder to audit and maintain. Sort the entries for
better maintenance.
No functional change; reordering only.
Assisted-by: Claude:claude-sonnet-4-6
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260625-reorg_qcom_binding-v1-1-f2c6501f7401@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Subsystem:
- add rtc_read_next_alarm() to read next expiring timer
Drivers:
- ds1307: handle OSF for ds1337/ds1339/ds3231, add clock provider for ds1307,
fix wday for rx8130
- m41t93: DT support, alarm, clock provider, watchdog support
- mv: add suspend/resume support for wakeup
- pcap: remove driver
- renesas-rtca3: many fixes
-----BEGIN PGP SIGNATURE-----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=SCOZ
-----END PGP SIGNATURE-----
Merge tag 'rtc-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Most of the work and improvements are for features of the m41t93.
The ds1307 also gets support for OSF (Oscillator Stop Flag) for
new variants.
The pcap driver is being removed as the Motorola EZX support was
removed a while ago.
Subsystem:
- add rtc_read_next_alarm() to read next expiring timer
Drivers:
- ds1307: handle OSF for ds1337/ds1339/ds3231, add clock provider for
ds1307, fix wday for rx8130
- m41t93: DT support, alarm, clock provider, watchdog support
- mv: add suspend/resume support for wakeup
- pcap: remove driver
- renesas-rtca3: many fixes"
* tag 'rtc-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (36 commits)
rtc: ds1307: update reference to removed CONFIG_RTC_DRV_DS1307_HWMON
platform/x86: amd-pmc: Fix S0i3 wakeup with alarmtimer
rtc: s35390a: fix typo in comment
rtc: cmos: unregister HPET IRQ handler on probe failure
rtc: ds1307: Fix off-by-one issue with wday for rx8130
dt-bindings: rtc: ds1307: Add epson,rx8901
rtc: bq32000: add delay between RTC reads
rtc: m41t93: Add watchdog support
rtc: m41t93: Add square wave clock provider support
rtc: m41t93: Add alarm support
rtc: m41t93: migrate to regmap api for register access
rtc: m41t93: add device tree support
dt-bindings: rtc: Add ST m41t93
rtc: ds1307: add support for clock provider in ds1307
rtc: mv: add suspend/resume support for wakeup
rtc: aspeed: add AST2700 compatible
dt-bindings: rtc: add ASPEED AST2700 compatible
rtc: interface: fix typos in rtc_handle_legacy_irq() documentation
rtc: msc313: fix NULL deref in shared IRQ handler at probe
rtc: remove unused pcap driver
...
Document the Imagis ISA1200 haptic motor driver, used primarily in mobile
handheld devices and capable of supporting up to two motors.
The exact datasheet for the ISA1200 is not available; all data was modeled
based on available downstream kernel sources for various devices and
fragments of information scattered across the internet.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260617070528.35006-2-clamor95@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
A fairly unremarkable collection of fixes that came in over the merge
window, plus a new device ID for the DesignWare controller in the
StarFive JHB100 SoC. There's a couple of core fixes included, one
avoiding freeing an empty resource in error handling cases and another
which fixes a NULL dereference which could be triggered by using an
abnormal device registration flow like driver_override.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmo+eSgACgkQJNaLcl1U
h9BiLwf+LSC77vZ/sKOJLV9CZnIq1ZOi5YVRXKbRLNhnFHIU2DetRXeGnRUmNr7s
WJFV6BO1i8eyYcoX/dyb3nf9kFX6dH1fw6FDby8QfA54b9cPkEZqNsl/K+3+Xbwb
3OJwv4zubDdFbr/qLCqMewAHdHSzefc02CbOeRdGv/AerPTa+r5WqXXWqZC2YKku
rhweANmQl0TUufHOaYSBaVDVHRGjblHDg6j9pLoUw2s1jPznIB/tqG8CPXnsiajl
ii6WgR6inaURBpW2LGaLlHiQ4qKJXlxV7uFWVY2KRPUVqHkW6rQj4K4Sa0pnbdz3
4t/5Afm4esZvMathb3lmPmsH7zIKcQ==
=Gy0X
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v7.2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A fairly unremarkable collection of fixes that came in over the
merge window, plus a new device ID for the DesignWare controller
in the StarFive JHB100 SoC.
There's a couple of core fixes included, one avoiding freeing an
empty resource in error handling cases and another which fixes a
NULL dereference which could be triggered by using an abnormal
device registration flow like driver_override"
* tag 'spi-fix-v7.2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: imx: reconfigure for PIO when DMA cannot be started
spi: dw: Add support for snps,dwc-ssi-2.00a
spi: dt-bindings: snps,dw-apb-ssi: Add starfive,jhb100-spi
spi: rpc-if: Use correct device for hardware reinitialization on resume
spi: acpi: Free resource list at appropriate time
spi: dw: fix wrong BAUDR setting after resume
spi: uniphier: Fix completion initialization order before devm_request_irq()
spi: Add NULL check for spi_get_device_id() in spi_get_device_match_data()
- Drop unnecessary type reference from khadas,mcu "fan-supply"
- Fix clocks in Renesas R-Mobile APE6 example
- Add missing Unisoc SC2730 PMIC regulators schema
- Fix Amlogic thermal example
- kernel-doc fix for of_map_id()
- Handle negative index in of_fwnode_get_reference_args()
-----BEGIN PGP SIGNATURE-----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=/1jq
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Drop unnecessary type reference from khadas,mcu "fan-supply"
- Fix clocks in Renesas R-Mobile APE6 example
- Add missing Unisoc SC2730 PMIC regulators schema
- Fix Amlogic thermal example
- kernel-doc fix for of_map_id()
- Handle negative index in of_fwnode_get_reference_args()
* tag 'devicetree-fixes-for-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: mfd: khadas,mcu: Drop type reference from "fan-supply"
dt-bindings: clock: renesas: div6: Use ZT/ZTR trace clock in R-Mobile APE6 example
regulator: dt-bindings: Add Unisoc SC2730 PMIC
dt-bindings: thermal: amlogic: Correct 'reg' in the example
dt-bindings: thermal: amlogic: Fix missing header in the example
of: Fix RST inline emphasis warnings in of_map_id() kernel-doc
of: property: Fix of_fwnode_get_reference_args() with negative index
Add the device tree bindings for the Realtek DHC (Digital Home Center)
RTD1625 GPIO controllers.
The RTD1625 GPIO controller features a per-pin register architecture
that differs significantly from previous generations. It utilizes
separate register blocks for GPIO configuration and interrupt control.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Tzuyi Chang <tychang@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Link: https://patch.msgid.link/20260622092335.1166876-2-eleanor.lin@realtek.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Mostly irrelevant for authentic Synaptics touchscreens, but very important
for applying workarounds to cheap TS knockoffs.
These knockoffs work well with the downstream driver, and since the user
has no way to distinguish them, later in this patch set, we introduce
workarounds to ensure they function as well as possible.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://patch.msgid.link/20260523-synaptics-rmi4-dt-v2-1-0645122babdc@ixit.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
various Qualcomm chips and Canaan K230. Otherwise there's
non-critical fixes and updates to clk data such as adding missing
clks to existing drivers or marking clks critical. Nothing looks
especially exciting.
-----BEGIN PGP SIGNATURE-----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=hEhO
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This is all clk driver updates. Mostly new SoC support for various
Qualcomm chips and Canaan K230. Otherwise there's non-critical fixes
and updates to clk data such as adding missing clks to existing
drivers or marking clks critical. Nothing looks especially exciting"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (106 commits)
clk: qcom: regmap-phy-mux: Rework the implementation
clk: qcom: a53: Corrected frequency multiplier for 1152MHz
clk: qcom: camcc-milos: Declare icc path dependency for CAMSS_TOP_GDSC
clk: qcom: gdsc: Support enabling interconnect path for power domain
dt-bindings: clock: qcom,milos-camcc: Document interconnect path
interconnect: Add devm_of_icc_get_by_index() as exported API for users
clk: qcom: camcc-x1p42100: Add support for camera clock controller
clk: qcom: camcc-x1e80100: Add support for camera QDSS debug clocks
clk: qcom: videocc-x1p42100: Add support for video clock controller
dt-bindings: clock: qcom: Add X1P42100 camera clock controller
dt-bindings: clock: qcom: Add X1P42100 video clock controller
clk: keystone: sci-clk: fix application of sizeof to pointer
clk: keystone: don't cache clock rate
clk: spacemit: k3: Add PCIe DBI clock
dt-bindings: soc: spacemit: k3: Add PCIe DBI clock IDs
clk: spacemit: k3: Fix PCIe clock register offset
clk: spacemit: k3: Switch to pll2_d6 as parent for PCIe clock
clk: at91: keep securam node alive while mapping it
clk: samsung: exynos990: Fix PERIC0/1 USI clock types
clk: renesas: r9a08g045: Drop unused pm_domain header file
...
kernel doc cleanup and a kzalloc flex usage.
-----BEGIN PGP SIGNATURE-----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=W+GR
-----END PGP SIGNATURE-----
Merge tag 'spmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sboyd/spmi
Pull SPMI updates from Stephen Boyd:
"Support for Qualcomm PMIC arbiter v8.5 and Hawi along with a
kernel doc cleanup and a kzalloc flex usage"
* tag 'spmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sboyd/spmi:
spmi: use kzalloc_flex in main allocation
spmi: clean up kernel-doc in spmi.h
spmi: spmi-pmic-arb: add support for PMIC arbiter v8.5
dt-bindings: spmi: glymur-spmi-pmic-arb: Add compatible for Qualcomm Hawi SoC
Current release - regressions:
- net: do not acquire dev->tx_global_lock in netdev_watchdog_up()
- net: ethtool: keep rtnl_lock for ops using ethtool_op_get_link()
- net: fix deadlock in nested UP notifier events
Current release - new code bugs:
- eth: cn20k: fix subbank free list indexing for search order
- eth: airoha: fix BQL underflow in shared QDMA TX ring
Previous releases - regressions:
- netfilter:
- flowtable: fix offloaded ct timeout never being extended
- nf_conncount: prevent connlimit drops for early confirmed ct
Previous releases - always broken:
- require CAP_NET_ADMIN in the originating netns when modifying
cross-netns devices
- report NAPI thread PID in the caller's pid namespace
- mac802154: fix dirty frag in in-place crypto for IOT radios
- sctp: hold socket lock when dumping endpoints in sctp_diag,
avoid an overflow
- eth: gve: fix header buffer corruption with header-split and HW-GRO
- af_key: initialize alg_key_len for IPComp states, prevent OOB read
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=dIVQ
-----END PGP SIGNATURE-----
Merge tag 'net-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and IPsec.
Current release - regressions:
- do not acquire dev->tx_global_lock in netdev_watchdog_up()
- ethtool: keep rtnl_lock for ops using ethtool_op_get_link()
- fix deadlock in nested UP notifier events
Current release - new code bugs:
- eth:
- cn20k: fix subbank free list indexing for search order
- airoha: fix BQL underflow in shared QDMA TX ring
Previous releases - regressions:
- netfilter:
- flowtable: fix offloaded ct timeout never being extended
- nf_conncount: prevent connlimit drops for early confirmed ct
Previous releases - always broken:
- require CAP_NET_ADMIN in the originating netns when modifying
cross-netns devices
- report NAPI thread PID in the caller's pid namespace
- mac802154: fix dirty frag in in-place crypto for IOT radios
- sctp: hold socket lock when dumping endpoints in sctp_diag, avoid
an overflow
- eth: gve: fix header buffer corruption with header-split and HW-GRO
- af_key: initialize alg_key_len for IPComp states, prevent OOB read"
* tag 'net-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (213 commits)
selftests: bonding: add a test for VLAN propagation over a bonded real device
vlan: defer real device state propagation to netdev_work
net: add the driver-facing netdev_work scheduling API
net: turn the rx_mode work into a generic netdev_work facility
net: ethtool: keep rtnl_lock for ops using ethtool_op_get_link()
rxrpc: Fix rxrpc_rotate_tx_rotate() to check there's something to rotate
rxrpc: Fix leak of released call in recvmsg(MSG_PEEK)
rxrpc: Fix socket notification race
rxrpc: Fix potential infinite loop in rxrpc_recvmsg()
rxrpc: Fix oob challenge leak in cleanup after notification failure
rxrpc: Fix the reception of a reply packet before data transmission
afs: Fix uncancelled rxrpc OOB message handler
afs: Fix further netns teardown to cancel the preallocation charger
rxrpc: Fix double unlock in rxrpc_recvmsg()
rxrpc: Fix leak of connection from OOB challenge
rxrpc: Fix ACKALL packet handling
net: hns3: differentiate autoneg default values between copper and fiber
net: hns3: fix permanent link down deadlock after reset
net: hns3: refactor MAC autoneg and speed configuration
net: hns3: unify copper port ksettings configuration path
...
Emails to the maintainer of Qualcomm PPE Ethernet driver (Luo Jie
<quic_luoj@quicinc.com>) bounce permanently (full mailbox), because the
"quicinc.com" addresses were deprecated for public work. All Qualcomm
contributors are aware of that and were asked to fix their addresses.
Driver is not supported - in terms of how netdev understands supported
commitment - if maintainer does not care to receive the patches for its
code, so demote it to "maintained" to reflect true status.
Fix all occurences of Luo Jie email address to preferred and working
domain.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Luo Jie <jie.luo@oss.qualcomm.com>
Link: https://patch.msgid.link/20260623073307.36483-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the Micrel PHY in the example which shouldn't have the
fallback "ethernet-phy-ieee802.3-c22" compatible:
Documentation/devicetree/bindings/net/renesas,ether.example.dtb: ethernet-phy@1 \
(ethernet-phy-id0022.1537): compatible: ['ethernet-phy-id0022.1537', 'ethernet-phy-ieee802.3-c22'] is too long
from schema $id: http://devicetree.org/schemas/net/micrel.yaml
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Fixes: 37a2fce090 ("dt-bindings: sh_eth convert bindings to json-schema")
Link: https://patch.msgid.link/20260624150250.131966-2-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=h+xD
-----END PGP SIGNATURE-----
Merge tag 'pci-v7.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Remove MPS/MRRS Kconfig settings (CONFIG_PCIE_BUS_*) that worked
around a WiFi device defect; use a quirk or boot-time
"pci=pcie_bus_tune_*" kernel parameter instead (Bjorn Helgaas)
- Always lift 2.5GT/s restriction in PCIe failed link retraining to
avoid clamping a link to 2.5GT/s after hot-plug changes the device
(Maciej W. Rozycki)
- Request bus reassignment when not probe-only to fix an enumeration
regression on Marvell CN106XX and possibly other DT-based systems
(Ratheesh Kannoth)
- Fix procfs race between pci_proc_init() and pci_bus_add_device()
that resulted in 'proc_dir_entry ... already registered' warnings
and pointer corruption (Krzysztof Wilczyński)
- Fix sysfs race that causes 'duplicate filename' warnings and boot
panics by converting PCI resource files to static attributes
(Krzysztof Wilczyński)
- Expose sysfs 'resourceN_resize' attributes only on platforms with
PCI mmap (Krzysztof Wilczyński)
- Require CAP_SYS_ADMIN to write to sysfs 'resourceN_resize'
attributes (Krzysztof Wilczyński)
- Add security_locked_down(LOCKDOWN_PCI_ACCESS) to alpha PCI resource
mmap path to match the generic path (Krzysztof Wilczyński)
- Use kstrtobool() to parse the 'rom' attribute input to avoid the
unexpected behavior of enabling the ROM when writing '0' with no
trailing newline (Krzysztof Wilczyński)
Resource management:
- Improve resource claim logging for debuggability (Ilpo Järvinen)
- Clean up several uses of const parameters (Ilpo Järvinen)
- Check option ROM header signatures and lengths before accessing to
avoid page faults and alignment faults (Guixin Liu)
ASPM:
- Don't reconfigure ASPM when entering low-power D-state; only do it
when returning back to D0 (Carlos Bilbao)
Power management:
- During suspend, set power state to 'unknown' for all devices, not
just those with drivers (Lukas Wunner)
- Skip restoring Resizable BARs and VF Resizable BARs if device
doesn't respond to config reads, to avoid invalid array accesses
(Marco Nenciarini)
- Add pci_suspend_retains_context() so drivers can tell whether
devices retain internal state across suspend/resume, since some
platforms reset devices on suspend; use this in nvme to avoid
issues on Qcom RCs (Manivannan Sadhasivam)
Power control:
- Only to power on/off devices that actually support power control to
avoid poking at incompatible devices mentioned in DT (Manivannan
Sadhasivam)
Virtualization and resets:
- Log device readiness timeouts as errors, not warnings, because the
device is likely unusable in this case (Bjorn Helgaas)
- Wait for device readiness after soft reset (D3hot ->
D0uninitialized transition), when the device may respond with
Request Retry Status (RRS) if it needs more time to initialize
(Bjorn Helgaas)
- Drop unnecessary retries when restoring BARs because resets should
now already include all required delays (Lukas Wunner)
- Avoid FLR for MediaTek MT7925 WiFi, where FLR fails after a VM
terminates uncleanly (Jose Ignacio Tornos Martinez)
- Avoid SBR for Qualcomm WCN6855/WCN7850 WiFi, SDX62/SDX65 modems,
which seem not to support it correctly (Jose Ignacio Tornos
Martinez)
Peer-to-peer DMA:
- Prevent P2PDMA as well as CPU access to non-mappable BARs, e.g.,
s390 ISM BARs (Matt Evans)
- Add Intel QAT, DSA, IAA devices to whitelist (Lukas Wunner)
Endpoint framework:
- Add endpoint controller APIs for use by function drivers to
discover auxiliary blocks like DMA engines (Koichiro Den)
- Remember DesignWare eDMA engine base/size and expose them via the
EPC aux-resource API (Koichiro Den)
- Add endpoint embedded doorbell fallback, used if MSI allocation
fails (Koichiro Den)
- Validate BAR index and remove dead BAR read in endpoint doorbell
test (Carlos Bilbao)
- Unwind MSI/MSI-X vectors if NTB initialization fails part-way
through (Koichiro Den)
- Cache sleepable pci_irq_vector() value at ISR setup to avoid
calling it from hardirq context (Koichiro Den)
- Call sleepable pci_epc_raise_irq() from a work item instead of
atomic context, e.g., when setting bits in NTB peer doorbells in
the ntb_peer_db_set() path (Koichiro Den)
- Report 0-based vNTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Prevent configfs writes to vNTB db_count and other values that are
already in use after EPC attach (Koichiro Den)
- Account for vNTB db_valid reserved slots (link event 0 and
historically skipped slot 1) so they don't appear as valid
doorbells (Koichiro Den)
- Implement vNTB .db_vector_count()/mask() for doorbells so clients
can use multiple vectors and avoid thundering herds (Koichiro Den)
- Report 0-based NTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Fix doorbell bitmask and IRQ vector handling to clear only
specified bits, use the correct vector for non-contiguous Linux IRQ
numbers, and validate incoming vectors (Koichiro Den)
- Implement NTB .db_vector_count()/mask() for doorbells so clients
can use multiple vectors (Koichiro Den)
Native PCIe controller infrastructure:
- Add pci_host_common_link_train_delay() for the mandatory delay
after > 5GT/s Link training completes and use it for cadence HPA,
j721e, LGA; dwc; aardvark, mediatek-gen3, rzg3s (Hans Zhang)
- Protect root bus removal with rescan lock in altera, brcmstb,
cadence, dwc, iproc, mediatek, plda, rockchip to prevent
use-after-free or crashes when racing with sysfs rescan or hotplug
(Hans Zhang)
- Add pci_host_common_parse_ports() for use by any native driver to
parse Root Port properties (per-Link features like width, speed,
PHY, power and reset control, etc should be described in Root Port
stanzas, not the host bridge; currently only reset GPIOs
implemented) (Sherry Sun)
New native PCIe controller drivers:
- Add DT binding and driver for UltraRISC DP1000 PCIe controller
(Xincheng Zhang, Jia Wang)
Altera PCIe controller driver:
- Do not dispose of the parent IRQ mapping, which belongs to the
parent interrupt controller (Mahesh Vaidya)
- Fix chained IRQ handler ordering issue and resource leaks on probe
failure (Mahesh Vaidya)
AMD MDB PCIe controller driver:
- Assert PERST# on shutdown so any connected Endpoints are held in
reset during shutdown (Sai Krishna Musham)
Amlogic Meson PCIe controller driver:
- Propagate devm_add_action_or_reset() failure to fix probe error
path (Shuvam Pandey)
- Add .remove() callback to deinitialize the host bridge and power
off the PHY (Shuvam Pandey)
Broadcom iProc PCIe controller driver:
- Restore .map_irq() assignment; its removal broke INTx on the iproc
platform bus driver (Mark Tomlinson)
Broadcom STB PCIe controller driver:
- No change, but products using certain WiFi devices may be affected
by removal of CONFIG_PCIE_BUS_* (see above)
Freescale i.MX6 PCIe controller driver:
- Move IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling into the core reset
functions (Richard Zhu)
- Assert PERST# before enabling regulators to ensure that even if
power is enabled, endpoint stays inactive until REFCLK is stable
(Sherry Sun)
- Parse reset properties in Root Port nodes (falling back to host
bridge) to help support Key E connectors and the pwrctrl framework
(Sherry Sun)
- Configure i.MX95 REF_USE_PAD before PHY reset (Richard Zhu)
- Assert i.MX95 ref_clk_en after reference clock stabilizes (Richard
Zhu)
- Integrate new pwrctrl API for DTs with Root Port-level power
supplies (Sherry Sun)
Intel Gateway PCIe controller driver:
- Enable clock before PHY init for correct ordering (Florian Eckert)
- Add .start_link() callback so the driver works again (Florian
Eckert)
- Stop overwriting the ATU base address discovered by
dw_pcie_get_resources() (Florian Eckert)
- Add DT 'atu' region since this is hardware-specific, and fall back
to driver default if lacking (Florian Eckert)
Loongson PCIe controller driver:
- Ignore downstream devices only on internal bridges to avoid
Loongson hardware issue (Rong Zhang)
- Quirk old Loongson-3C6000 bridges that advertise incorrect
supported link speeds (Ziyao Li)
Marvell MVEBU PCIe controller driver:
- Use fixed-width interrupt masks to avoid truncation in 64-bit
builds (Rosen Penev)
MediaTek PCIe controller driver:
- Use FIELD_PREP() to fix incorrect operator precedence in
PCIE_FTS_NUM_L0 (Li RongQing)
- Fix IRQ domain leak when port fails to enable (Manivannan
Sadhasivam)
- Use actual physical address for MSI message address instead of
virt_to_phys() (Manivannan Sadhasivam)
- Add EcoNet EN7528 to DT binding (Caleb James DeLisle)
MediaTek PCIe Gen3 controller driver:
- Deassert PCIE_PHY_RSTB so REFCLK is stable for at least 100ms
(PCIE_T_PVPERL_MS) before deasserting PERST# (Jian Yang)
- Add .shutdown() to assert PERST# before powering down device (Jian
Yang)
- Do full device power down on removal, including asserting PERST#,
when removing driver (Chen-Yu Tsai)
- Fix a 'failed to create pwrctrl devices' error message that was
inadvertently skipped (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Program the DesignWare PORT_AFR L1 entrance latency based on the
'aspm-l1-entry-delay-ns' DT property (Manikanta Maddireddy)
Qualcomm PCIe controller driver:
- Add Eliza SoC compatible in DT binding (Krishna Chaitanya Chundru)
- Set max OPP during resume so DBI register accesses don't fail with
NoC errors (Qiang Yu)
- Add pci_host_common_d3cold_possible() to determine whether
downstream devices are already in D3hot and wakeup-enabled devices
are capable of generating PME from D3cold (Krishna Chaitanya
Chundru)
- Add .get_ltssm() callback to get the LTSSM status without DBI,
since DBI may be inaccessible after PME_Turn_Off (Krishna Chaitanya
Chundru)
- Power down PHY via PARF_PHY_CTRL before disabling rails/clocks to
avoid power leakage (Krishna Chaitanya Chundru)
- Decide whether suspend should put the link in L2 and power down
using pci_host_common_d3cold_possible() instead of checking whether
ASPM L1 is enabled (Krishna Chaitanya Chundru)
- Add qcom D3cold support to tear down interconnect bandwidth and OPP
votes (Krishna Chaitanya Chundru)
- Handle unsupported mixed PERST#/PHY DT configurations, e.g., PHY in
RP node while PERST# is in the RC node, but warn about the DT issue
(Qiang Yu)
- Program T_POWER_ON based on DT 't-power-on-us' property in case
hardware advertises incorrect values (Krishna Chaitanya Chundru)
- Disable ASPM L0s for SA8775P (Shawn Guo)
- Initialize DWC MSI lock for firmware-managed ECAM hosts, which
don't use the dw_pcie_host_init() path that initializes the lock
(Yadu M G)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/V2N DT support (Lad Prabhakar)
SOPHGO PCIe controller driver:
- Add 'dma-coherent' DT property for sg2042-pcie driver (Han Gao)
Synopsys DesignWare PCIe controller driver:
- Apply ECRC TLP Digest workaround for all DesignWare cores prior to
5.10a, not just 4.90a and 5.00a (Manikanta Maddireddy)
- Use common struct dw_pcie 'mode' rather than duplicating it in
artpec6, dra7xx, dwc-pcie, and keembay driver structs (Hans Zhang)
- Use DEFINE_SHOW_ATTRIBUTE for ltssm_status debugfs to reduce
boilerplate and fix a seq_file memory leak by including a
.release() callback (Hans Zhang)
- Fix a signedness bug in fault injection test code (Dan Carpenter)
- Avoid NULL pointer dereference when tearing down debugfs for
controller that lacks RAS DES capability (Shuvam Pandey)
MicroSemi Switchtec management driver:
- Add Gen6 Device IDs (Ben Reed)
Miscellaneous:
- Remove unused gpio.h include from amd-mdb, designware-plat, fu740,
visconti drivers (Andy Shevchenko)
- Fix typos in documentation (josh ziegler)
- Use FIELD_MODIFY() instead of open-coding it (Hans Zhang)"
* tag 'pci-v7.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (168 commits)
PCI/sysfs: Use kstrtobool() to parse the ROM attribute input
PCI/sysfs: Limit BAR resize attribute scope to platforms with PCI mmap
PCI/sysfs: Remove pci_create_legacy_files() and pci_sysfs_init()
PCI/sysfs: Convert legacy I/O and memory attributes to static definitions
PCI/sysfs: Add __weak pci_legacy_has_sparse() helper
alpha/PCI: Compute legacy size in pci_mmap_legacy_page_range()
PCI: Add macros for legacy I/O and memory address space sizes
PCI/sysfs: Remove pci_{create,remove}_sysfs_dev_files()
alpha/PCI: Convert resource files to static attributes
alpha/PCI: Add static PCI resource attribute macros
alpha/PCI: Remove WARN from __pci_mmap_fits() and __legacy_mmap_fits()
alpha/PCI: Fix __pci_mmap_fits() overflow for zero-length BARs
alpha/PCI: Use PCI resource accessor macros
alpha/PCI: Use BAR index in sysfs attr->private instead of resource pointer
alpha/PCI: Add security_locked_down() check to pci_mmap_resource()
PCI/sysfs: Limit pci_sysfs_init() late_initcall compile scope
PCI/sysfs: Add stubs for pci_{create,remove}_sysfs_dev_files()
PCI/sysfs: Warn about BAR resize failure in __resource_resize_store()
PCI/sysfs: Convert PCI resource files to static attributes
PCI/proc: Fix race between pci_proc_init() and pci_bus_add_device()
...
- A new driver for Wacom W9000-series penabled touchscreens
- Updates to STM FTS driver adding support for reset line and preparing
the driver for STMFTS5 support
- Updates to RMI4 and IMS PCU drivers hardening the code
- Support for half-duplex mode restored in ADS7846 driver
- Updates to driver's device_id tables to use named initializers
- Removal of no longer used PCAP keys and touchscreen drivers (support
for the ezx series of phones was removed in 2022)
- Removal of xilinx_ps2 driver which is no longer used either
- Updates to userio to allow setting up additional serio port
characteristics (such as id, extra and proto)
- Assorted hardening and cleanup fixes for other drivers.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCajs+4wAKCRBAj56VGEWX
nN+EAQDaknpx+XZLU28jQqm4mK2BZde1cbtZ9/D7VS3n50by9AD/e+Tr3aqDAjTs
hmDqdkrBIo8YlvlCvq4dosAKBH8gXA0=
=nZiu
-----END PGP SIGNATURE-----
Merge tag 'input-for-v7.2-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- A new driver for Wacom W9000-series penabled touchscreens
- Updates to STM FTS driver adding support for reset line and preparing
the driver for STMFTS5 support
- Updates to RMI4 and IMS PCU drivers hardening the code
- Support for half-duplex mode restored in ADS7846 driver
- Updates to driver's device_id tables to use named initializers
- Removal of no longer used PCAP keys and touchscreen drivers (support
for the ezx series of phones was removed in 2022)
- Removal of xilinx_ps2 driver which is no longer used either
- Updates to userio to allow setting up additional serio port
characteristics (such as id, extra and proto)
- Assorted hardening and cleanup fixes for other drivers
* tag 'input-for-v7.2-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (72 commits)
Input: mms114 - fix touch indexing for MMS134S and MMS136
Input: elan_i2c - prevent division by zero and arithmetic underflow
Input: stop force-feedback timer when unregistering input devices
Input: iforce - bound the device-reported force-feedback effect index
Input: goodix - clamp the device-reported contact count
Input: mms114 - reject an oversized device packet size
Input: touchwin - reset the packet index on every complete packet
Input: rmi4 - update formatting in F12
Input: rmi4 - propagate proper error code in F12 sensor tuning
Input: rmi4 - simplify size calculations in F12
Input: rmi4 - use sizeof(*ptr) and idiomatic checks in f12 allocators
Input: rmi4 - use devm_kmalloc for F12 data packet buffer
Input: rmi4 - use flexible array member for IRQ masks in F12
Input: rmi4 - use unaligned access helpers in F12
Input: rmi4 - change reg_size type to u32
Input: rmi4 - refactor F12 probe function
Input: rmi4 - use kzalloc_flex() for struct rmi_function
Input: rmi4 - refactor function allocation and registration
Input: rmi4 - use local presence map in rmi_read_register_desc()
Input: rmi4 - fix limit in rmi_register_desc_has_subpacket()
...
"fan-supply" already has a type and shouldn't have a type $ref. Drop the
$ref to fix the warning.
Fixes: 39dd85d924 ("dt-bindings: mfd: khadas: Add new compatible for Khadas VIM4 MCU")
Link: https://patch.msgid.link/20260624133643.4146351-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add bindings for the regulators found in the Spreadtrum/Unisoc SC2730
PMIC, used e.g. with the UMS512 and UMS9230 SoCs.
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260620-sc2730-regulators-v6-1-bbd2db395231@abscue.de
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The example DTS is tested in a wrapped node with address/size-cells=1,
thus reg had incorrect entry leading to dt_binding_check fails:
thermal/amlogic,thermal.example.dtb: temperature-sensor@20000 (amlogic,t7-thermal): reg: [[0, 131072], [0, 80]] is too long
Fixes: b1c8ccdbd4 ("dt-bindings: thermal: amlogic: Add support for T7")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260622100231.438435-4-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Bunch of new driver, device support in existing drivers/binding and few
updates to existing drivers
- New Support
- Qualcomm Eliza QMP PHY, Eliza Synopsys eUSB2 support, Eliza PCIe phy
support, Nord QMP UFS PHY, IPQ5210 USB3 PHY support
- Econet EN751221 and EN7528 PCIe phy support
- NXPs TJA1145 CAN transceiver phy support
- TI DS125DF111 retimer phy support
- Rockchip RK3528 usb phy support
- TI J722S phy support
- Axiado eMMC PHY driver
- EyeQ5 Ethernet PHY driver
- Generic PHY driver for Lynx 10G SerDes
- Spacemit K3 USB2 PHY support
- Updates
- Tomi helping maintian zynqmp phys
- lynx phy updates to support 25GBASER
- Rockchip GRF for RK3568/RV1108 support
- Qualcomm QSERDES COM v2 support
-----BEGIN PGP SIGNATURE-----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=b6+n
-----END PGP SIGNATURE-----
Merge tag 'phy-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"Bunch of new driver, device support in existing drivers/binding and
few updates to existing drivers
New Support:
- Qualcomm Eliza QMP PHY, Eliza Synopsys eUSB2 support, Eliza PCIe
phy support, Nord QMP UFS PHY, IPQ5210 USB3 PHY support
- Econet EN751221 and EN7528 PCIe phy support
- NXPs TJA1145 CAN transceiver phy support
- TI DS125DF111 retimer phy support
- Rockchip RK3528 usb phy support
- TI J722S phy support
- Axiado eMMC PHY driver
- EyeQ5 Ethernet PHY driver
- Generic PHY driver for Lynx 10G SerDes
- Spacemit K3 USB2 PHY support
Updates:
- Tomi helping maintian zynqmp phys
- lynx phy updates to support 25GBASER
- Rockchip GRF for RK3568/RV1108 support
- Qualcomm QSERDES COM v2 support"
* tag 'phy-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (87 commits)
phy: rockchip: inno-usb2: Add missing clkout_ctl_phy kerneldoc
phy: Move MODULE_DEVICE_TABLE next to the table itself
phy: add basic support for NXPs TJA1145 CAN transceiver
dt-bindings: phy: add support for NXPs TJA1145 CAN transceiver
phy: freescale: phy-fsl-imx8qm-lvds-phy: Fix missing pm_runtime_disable() on probe error path
dt-bindings: phy: qcom,qmp-usb: Add ipq5210 USB3 PHY
dt-bindings: phy: qcom,qusb2: Document IPQ5210 compatible
phy: freescale: phy-fsl-imx8qm-lvds-phy: Use synchronous PM runtime put in reset
MAINTAINERS: expand Lynx 28G entry to cover Lynx 10G SerDes
phy: lynx-10g: new driver
dt-bindings: phy: lynx-10g: initial document
phy: lynx-28g: improve phy_validate() procedure
phy: lynx-28g: optimize read-modify-write operation
phy: lynx-28g: add support for big endian register maps
phy: lynx-28g: common probe() and remove()
phy: lynx-28g: make lynx_28g_pll_read_configuration() callable per PLL
phy: lynx-28g: move struct lynx_info definitions downwards
phy: lynx-28g: provide default lynx_lane_supports_mode() implementation
phy: lynx-28g: generalize protocol converter accessors
phy: lynx-28g: common lynx_pll_get()
...
- Use FIELD_PREP() to fix incorrect operator precedence in PCIE_FTS_NUM_L0
(Li RongQing)
- Fix IRQ domain leak when port fails to enable (Manivannan Sadhasivam)
- Use actual physical address for MSI message address instead of
virt_to_phys() (Manivannan Sadhasivam)
- Add EcoNet EN7528 to DT binding (Caleb James DeLisle)
* pci/controller/mediatek:
dt-bindings: PCI: mediatek: Add support for EcoNet EN7528
PCI: mediatek: Use actual physical address instead of virt_to_phys()
PCI: mediatek: Fix IRQ domain leak when port fails to enable
PCI: mediatek: Fix operator precedence in PCIE_FTS_NUM_L0 macro
- Enable clock before PHY init for correct ordering (Florian Eckert)
- Add .start_link() callback so the driver works again (Florian Eckert)
- Stop overwriting the ATU base address discovered by
dw_pcie_get_resources() (Florian Eckert)
- Add DT 'atu' region since this is hardware-specific, and fall back to
driver default if lacking (Florian Eckert)
* pci/controller/dwc-intel-gw:
dt-bindings: PCI: intel,lgm-pcie: Add 'atu' resource
PCI: intel-gw: Fix ATU base address setup and add optional DT 'atu' region
PCI: intel-gw: Add .start_link() callback
PCI: intel-gw: Enable clock before PHY init
PCI: intel-gw: Move interrupt enable to own function
PCI: intel-gw: Remove unused PCIE_APP_INTX_OFST definition
- Move IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling into the core reset
functions (Richard Zhu)
- Add pci_host_common_parse_ports() for use by any native driver to parse
Root Port properties (currently only reset GPIOs) (Sherry Sun)
- Assert PERST# before enabling regulators to ensure that even if power is
enabled, endpoint stays inactive until REFCLK is stable (Sherry Sun)
- Parse reset properties in Root Port nodes (falling back to host bridge)
to help support Key E connectors and the pwrctrl framework (Sherry Sun)
- Configure i.MX95 REF_USE_PAD before PHY reset (Richard Zhu)
- Assert i.MX95 ref_clk_en after reference clock stabilizes (Richard Zhu)
- Integrate new pwrctrl API for DTs with Root Port-level power supplies
(Sherry Sun)
* pci/controller/dwc-imx6:
PCI: imx6: Integrate new pwrctrl API
PCI: imx6: Assert ref_clk_en after reference clock stabilizes on i.MX95
PCI: imx6: Configure REF_USE_PAD before PHY reset for i.MX95
PCI: imx6: Parse 'reset-gpios' in Root Port nodes
PCI: imx6: Assert PERST# before enabling regulators
PCI: host-generic: Add common helpers for parsing Root Port properties
dt-bindings: PCI: fsl,imx6q-pcie: Add reset GPIO in Root Port node
PCI: imx6: Fix IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling
PCIe controller present in Eliza SoC is backwards compatible with the
controller present in SM8550 SoC. Hence, add the compatible with SM8550
fallback.
Eliza requires 6 reg entries, 8 clocks and 9 interrupts, so add the
corresponding allOf constraints.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260608-eliza-v3-2-9bdeb7434b28@oss.qualcomm.com
Document the Renesas RZ/V2N PCIe host controller, which is compatible with
the RZ/G3E PCIe IP and therefore uses it as a fallback compatible. The
only difference is that it uses device ID 0x003B.
Make the binding title generic to avoid extending the title for each new
SoC, and update the description to list the supported SoCs and their
capabilities.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260501102407.29462-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Add dma-coherent as an allowed property in the SG2042 PCIe host controller
binding. SG2042's PCIe Root Complexes are cache-coherent with the CPU.
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260331171248.973014-2-gaohan@iscas.ac.cn
- core: add debugfs support for used channels, fix resource leak on startup failure, propagate tx error codes, and clarify blocking mode thread support
- exynos: remove unused register definitions
- imx: refactor IRQ handlers, migrate to devm helpers, and other minor improvements
- mpfs: fix syscon presence check in inbox ISR
- mtk-adsp: fix use-after-free during device teardown
- qcom: add dt-bindings for QCOM Maili, Hawi, Shikra APCS, and Nord CPUCP platform support
-----BEGIN PGP SIGNATURE-----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=5JeW
-----END PGP SIGNATURE-----
Merge tag 'mailbox-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
"Core:
- add debugfs support for used channels
- fix resource leak on startup failure
- propagate tx error codes
- clarify blocking mode thread support
Drivers:
- exynos: remove unused register definitions
- imx: refactor IRQ handlers, migrate to devm helpers, and other
minor improvements
- mpfs: fix syscon presence check in inbox ISR
- mtk-adsp: fix use-after-free during device teardown
- qcom: add dt-bindings for QCOM Maili, Hawi, Shikra APCS, and Nord
CPUCP platform support"
* tag 'mailbox-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: (23 commits)
mailbox: imx: Don't force-thread the primary handler
mailbox: imx: Move the RXDB part of the mailbox into the threaded handler
mailbox: imx: Move the RX part of the mailbox into the threaded handler
mailbox: imx: Start splitting the IRQ handler in primary and threaded handler
mailbox: imx: Use channel index instead of zero in imx_mu_specific_rx()
mailbox: imx: use devm_of_platform_populate()
mailbox: imx: Use devm_pm_runtime_enable()
mailbox: imx: Add a channel shutdown field
mailbox: imx: Forward the timeout/ error in imx_mu_generic_tx()
dt-bindings: mailbox: qcom: Add IPCC support for Maili Platform
mailbox: add list of used channels to debugfs
mailbox: don't free the channel if the startup callback failed
mailbox: Make mbox_send_message() return error code when tx fails
mailbox: Clarify multi-thread is not supported in blocking mode
mailbox: mtk-adsp: fix UAF during device teardown
mailbox: qcom: Unify user-visible "Qualcomm" name
mailbox: exynos: Drop unused register definitions
dt-bindings: mailbox: qcom: Add IPCC support for Hawi Platform
dt-bindings: mailbox: qcom,cpucp-mbox: Add Hawi compatible
dt-bindings: mailbox: qcom: Add Shikra APCS compatible
...
CAP1114 is a 14-channel capacitive touch sensor with 11 LED outputs
and hardware reset support.
Add the compatible string for CAP1114, add its datasheet URL,
update the maximum of LED channel reg, and add constraint for
linux,keycodes.
Previously, the LED reg property had a default maximum of 7 for CAP1188.
With the addition of CAP1114, the default maximum is now 11.
An if-then constraint is added to limit the LED count for CAP1188.
Update description for microchip,input-threshold: CAP1114 only provides
eight threshold entries, which does not match its total channel count.
CAP1114 does not support microchip,signal-guard and
microchip,calib-sensitivity.
Add CAP1114 to the unsupported enum list.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260617150318.753148-10-jerrysteve1101@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add support for the optional reset-gpios property to describe
the active-high reset pin for CAP1126/CAP1188 devices.
Driving the GPIO high asserts reset and deep sleep, while driving
it low releases reset for normal operation.
Restrict this property to be available only on CAP1126 and CAP1188
chips, as other CAP11xx variants do not have a hardware reset pin.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260617150318.753148-6-jerrysteve1101@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Apply per-chip LED channel limits:
- CAP1126: max 2 channels (0-1)
- CAP1188: max 8 channels (0-7)
- CAP1106, CAP12xx: no LED support
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260617150318.753148-5-jerrysteve1101@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- Add datasheet links for all supported CAP11xx variants.
- Update LED node regex and replace enum constraints with minimum/maximum
for LED reg ranges in preparation for CAP1114 support.
CAP1114 has 11 LED channels. minimum/maximum constraints are easier to
maintain than long enum lists when expanding channel count later.
Drop unnecessary led unit-address pattern.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260617150318.753148-4-jerrysteve1101@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Document the compatible string for the RTC controller found on
ASPEED AST2700 SoCs.
Signed-off-by: Tommy Huang <tommy_huang@aspeedtech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260601-ast2700-rtc-v1-1-15d4ca46500a@aspeedtech.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Here is the big set of char, misc, iio, fpga, and other small driver
subsystems changes for 7.2-rc1.
Lots of little stuff in here, the majority being of course the IIO
driver updates, as a list they are:
- IIO driver updates and additions
- GPIB driver bugfixes and cleanups
- Android binder driver updates (rust and C version)
- counter driver updates
- MHI driver updates
- mei driver updates
- w1 driver updates
- interconnect driver updates
- Comedi driver fixes and updates
- some obsolete char drivers removed (applicom and dtlk)
- hwtracing driver updates
- other tiny driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCajk4Gg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl89wCdG1WBLsvKHZ3zaFWd4POE8G/gS1YAnRf0GcRB
0F1/iBXSZLaRF/p9dsGq
=fg13
-----END PGP SIGNATURE-----
Merge tag 'char-misc-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull misc driver updates from Greg KH:
"Here is the big set of char, misc, iio, fpga, and other small driver
subsystems changes for 7.2-rc1.
Lots of little stuff in here, the majority being of course the IIO
driver updates, as a list they are:
- IIO driver updates and additions
- GPIB driver bugfixes and cleanups
- Android binder driver updates (rust and C version)
- counter driver updates
- MHI driver updates
- mei driver updates
- w1 driver updates
- interconnect driver updates
- Comedi driver fixes and updates
- some obsolete char drivers removed (applicom and dtlk)
- hwtracing driver updates
- other tiny driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits)
w1: ds2482: Use named initializers for arrays of i2c_device_data
firmware: stratix10-svc: Add support to query Arm Trusted Firmware (ATF) version
firmware: stratix10-rsu: avoid blocking reboot_image sysfs when busy
coresight: ultrasoc-smb: Fix OOB write in smb_sync_perf_buffer()
iio: adc: nxp-sar-adc: harden buffer ISR against per-channel read failure
iio: chemical: scd30: Replace manual locking with RAII locking
iio: light: tsl2591: remove unneeded tsl2591_compatible_als_persist_cycle()
iio: dac: ad5686: create bus ops struct
iio: dac: ad5686: cleanup doc header of local structs
iio: dac: ad5686: add control_sync() for single-channel devices
iio: dac: ad5686: add helpers to handle powerdown masks
iio: dac: ad5686: add of_match table to the spi driver
iio: dac: ad5686: drop enum id
iio: dac: ad5686: remove redundant register definition
iio: dac: ad5686: refactor include headers
iio: adc: ad4080: fix AD4880 chip ID
iio: light: veml3328: add support for new device
dt-bindings: iio: light: veml6030: add veml3328
fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header()
fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region()
...
Here is the big set of USB and Thunderbolt driver changes for 7.2-rc1.
Lots of little stuff in here, major highlights include:
- USB4STREAM support for Thunderbolt devices. A new way to send "raw"
data very quickly over a USB4 connection to another system directly.
- Other thunderbolt updates and changes to make the stream code work
- xhci driver updates and additions
- typec driver updates and additions
- usb gadget driver updates and fixes for reported issues
- zh_CN documentation translation of the USB documentation
- usb-serial driver updates
- dts cleanups for some USB platforms
- other minor USB driver updates and tweaks
All of these have been in linux-next for over a week with no reported
issues, most of them for many many weeks.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCajk1lg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymieQCg1VgSwN2sXBtMDGi4Sca+ecADx2kAn0bm/e/C
JjShAcuQ/vj/6zNJm0ll
=vXkP
-----END PGP SIGNATURE-----
Merge tag 'usb-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 7.2-rc1.
Lots of little stuff in here, major highlights include:
- USB4STREAM support for Thunderbolt devices. A new way to send "raw"
data very quickly over a USB4 connection to another system directly
- Other thunderbolt updates and changes to make the stream code work
- xhci driver updates and additions
- typec driver updates and additions
- usb gadget driver updates and fixes for reported issues
- zh_CN documentation translation of the USB documentation
- usb-serial driver updates
- dts cleanups for some USB platforms
- other minor USB driver updates and tweaks
All of these have been in linux-next for over a week with no reported
issues, most of them for many many weeks"
* tag 'usb-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (131 commits)
usb: ucsi: huawei_gaokun: support mode switching
thunderbolt: debugfs: Fix sideband write size check
thunderbolt: debugfs: Fix margining error counter buffer leak
usb: host: xhci-rcar: Split R-Car Gen2 and Gen3 .plat_start() handling
usb: host: xhci-rcar: Remove SET_XHCI_PLAT_PRIV_FOR_RCAR() macro
usb: xhci: allocate internal DCBAA mirror dynamically
usb: xhci: allocate DCBAA based on host controller max slots
usb: xhci: refactor DCBAA struct
xhci: Prevent queuing new commands if xhci is inaccessible
xhci: dbc: detect and recover hung DbC during enumeraton
xhci: dbc: add timestamps to DbC state changes in a new helper.
xhci: dbc: add helper to set and clear DbC DCE enable bit
xhci: dbc: serialize enabling and disabling dbc
xhci: dbc: Fix sysfs ABI Documentation for xhci dbc states
usb: xhci: Improve Soft Retries after short transfers
usb: xhci: Remove isochronous URB_SHORT_NOT_OK handling
usb: xhci: Remove skip_isoc_td()
usb: xhci: Simplify xhci_quiesce()
usb: xhci: remove legacy 'num_trbs_free' tracking
usb: xhci: fix typo in xhci_set_port_power() comment
...
Here is the big set of TTY and Serial driver updates for 7.2-rc1.
Overall we end up removing more code than added, due to an obsolete
synclink_gt driver being removed from the tree, always a nice thing to
see happen.
Other than that driver removal, major things included in here are:
- max310x serial driver updates and fixes
- 8250 driver updates and rework in places to make it more "modern"
- dts file updates
- serial driver core tweaks and updates
- vt code cleanups
- vc_screen crash fixes
- other minor driver updates and cleanups
All of these have been in linux-next for well over a week with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCajk2xQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymyewCeKSdE2vNK6LQz9hdev9qBh/J0n7oAn091vfYP
i9C0vxEB+sS9vMsRAro5
=14Tn
-----END PGP SIGNATURE-----
Merge tag 'tty-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of TTY and Serial driver updates for 7.2-rc1.
Overall we end up removing more code than added, due to an obsolete
synclink_gt driver being removed from the tree, always a nice thing to
see happen.
Other than that driver removal, major things included in here are:
- max310x serial driver updates and fixes
- 8250 driver updates and rework in places to make it more "modern"
- dts file updates
- serial driver core tweaks and updates
- vt code cleanups
- vc_screen crash fixes
- other minor driver updates and cleanups
All of these have been in linux-next for well over a week with no
reported issues"
* tag 'tty-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (49 commits)
serial: 8250_pci: Don't specify conflicting values to pci_device_id members
vc_screen: fix null-ptr-deref in vcs_notifier() during concurrent vcs_write
serial: qcom_geni: Fix RX DMA stall when SE_DMA_RX_LEN_IN is zero
vt: merge ucs_is_zero_width()/ucs_is_double_width() into ucs_get_width()
serial: 8250: fix possible ISR soft lockup
dt-bindings: serial: rs485: remove deprecated .txt binding stub
serial: qcom-geni: trace: Add tracepoint support for Qualcomm GENI serial
tty: serial: Use named initializers for arrays of i2c_device_data
serial: 8250_dw: remove clock-notifier infrastructure
serial: 8250_dw: unregister 8250 port if clk_notifier_register() fails
amba/serial: amba-pl011: Bring back zx29 UART support
serial: 8250: Add support for console flow control
serial: 8250: Check LSR timeout on console flow control
serial: 8250: Set cons_flow on port registration
tty: serial: 8250: protect against NULL uart->port.dev in register
arm64: dts: add support for A9 based Amlogic BY401
dt-bindings: arm: amlogic: add A311Y3 support
serial: max310x: fix compile errors if CONFIG_SPI_MASTER is disabled
serial: qcom-geni: Avoid probing debug console UART without console support
serial: max310x: add comments for PLL limits
...
- generic cleanups in qcom, qcom-cci and pxa, plus core cleanups
in algo-bit and atr
Fixes:
- davinci: clean up cpufreq notifier on probe failure
- imx-lpi2c: suspend the adapter while hardware is powered down
- ls2x-v2: return IRQ_HANDLED after servicing error interrupts
- stm32f7: fix timing calculation accuracy
DT bindings:
- microchip: permit resets
- i2c-mux-pinctrl: update maintainer entry
- i2c-mux-reg: convert bindings to DT schema
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQScDfrjQa34uOld1VLaeAVmJtMtbgUCajj5DwAKCRDaeAVmJtMt
brJXAP9XDjeVr3txsLuW3tC/JPvYmJdbuekbs62DSSIanrCMTwEA2jR4Z1QUZRaS
Lwl0axWfbkwRvXzvJW3/CJpg+5mjLQE=
=sRxB
-----END PGP SIGNATURE-----
Merge tag 'i2c-7.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux
Pull more i2c updates from Andi Shyti:
"Cleanups:
- generic cleanups in qcom, qcom-cci and pxa, plus core cleanups in
algo-bit and atr
Fixes:
- davinci: clean up cpufreq notifier on probe failure
- imx-lpi2c: suspend the adapter while hardware is powered down
- ls2x-v2: return IRQ_HANDLED after servicing error interrupts
- stm32f7: fix timing calculation accuracy
DT bindings:
- microchip: permit resets
- i2c-mux-pinctrl: update maintainer entry
- i2c-mux-reg: convert bindings to DT schema"
* tag 'i2c-7.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux:
i2c: pxa: Use named initializers for the platform_device_id array
i2c: imx-lpi2c: mark I2C adapter when hardware is powered down
i2c: stm32f7: truncate clock period instead of rounding it
dt-bindings: i2c: microchip,corei2c: permit resets
i2c: qcom: Unify user-visible "Qualcomm" name
i2c: ls2x-v2: return IRQ_HANDLED after servicing an error
i2c: atr: annotate i2c_atr_adap_desc->aliases with __counted_by_ptr
i2c: algo: bit: use str_plural helper in bit_xfer
dt-bindings: i2c: i2c-mux-pinctrl: change maintainer
dt-bindings: i2c: convert i2c-mux-reg to DT schema
i2c: davinci: Unregister cpufreq notifier on probe failure
i2c: qcom-cci: Remove overcautious disable_irq() calls
i2c: qcom-cci: Move cci_init() under cci_reset() function
i2c: qcom-cci: Do not check return value of cci_init()
Subsystem:
- introduce dynamic address reconciliation after DAA
- add preliminary API for hub support
- fixes for dev_nack_retry_count handling
- move hot-join support in the core instead of open coding in different drivers
Drivers:
- mipi-i3c-hci-pci: DMA abort, recovery and related improvements, hot-join
support, Microchip SAMA7D65 support, fix possible race in IBI handling
- dw-i3c-master: fix IBI count register selection for versalnet
- svc: interrupt handling fixes for NPCM845
-----BEGIN PGP SIGNATURE-----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=S86N
-----END PGP SIGNATURE-----
Merge tag 'i3c/for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"This cycle, there was a lot of work around the mipi-i3c-hci driver
that also led to improvements of the core. We also have support for a
new SoC, the Microchip SAMA7D65. And of course, there are small fixes
for the other controller drivers.
Subsystem:
- introduce dynamic address reconciliation after DAA
- add preliminary API for hub support
- fixes for dev_nack_retry_count handling
- move hot-join support in the core instead of open coding in
different drivers
Drivers:
- mipi-i3c-hci-pci: DMA abort, recovery and related improvements,
hot-join support, Microchip SAMA7D65 support, fix possible race in
IBI handling
- dw-i3c-master: fix IBI count register selection for versalnet
- svc: interrupt handling fixes for NPCM845"
* tag 'i3c/for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (45 commits)
i3c: mipi-i3c-hci: Use named initializers for platform_device_id's .driver_data
i3c: master: Use unsigned int for dev_nack_retry_count consistently
i3c: master: Add missing runtime PM get in dev_nack_retry_count_store()
i3c: master: Update dev_nack_retry_count under maintenance lock
i3c: master: Expose the APIs to support I3C hub
i3c: master: rename i3c_master_reattach_i3c_dev() to *_locked
i3c: mipi-i3c-hci: add microchip sama7d65 SoC compatible with the required quirk
dt-bindings: i3c: mipi-i3c-hci: add Microchip SAMA7D65 compatible
i3c: Consistently define pci_device_ids using named initializers
i3c: master: Reconcile dynamic addresses after DAA
i3c: master: Move DAA API functions after i3c_master_add_i3c_dev_locked()
i3c: master: Make i3c_master_add_i3c_dev_locked() return void
i3c: mipi-i3c-hci: Tolerate i3c_master_add_i3c_dev_locked() failures in DAA
i3c: master: Prevent reuse of dynamic address on device add failure
i3c: mipi-i3c-hci: Ignore DISEC failures when disabling IBIs
i3c: mipi-i3c-hci: Fix race in i3c_hci_addr_to_dev()
i3c: mipi-i3c-hci: Add Hot-Join support
i3c: master: Export i3c_master_enec_disec_locked()
i3c: master: Defer new-device registration out of DAA caller context
i3c: dw: Drop redundant Hot-Join cancel_work_sync() in shutdown
...
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmo41jgTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXjo1CACiN+Ifxj67WZAy1c1tqlHTJbD/OcAh
KlbZQCVG3QoV9RC8yc9U2DyzSv488YujrqaJhsRg35Cjqs91dFlaXOemArF9dk8f
ICy3SU48sCGvm6v95ndClUyvncAkqcPR/tyfNs7l5rPh6fZnXEov2SdtOlMMayOA
HD/s+urd4AiIT3ffj/Ikl/+VrxC7rkYw5oXRF83y4oG79BDtXxgsSlHCudCAM15O
FvBeUyTT7/7Phz7jk+oNiNBEtJTq6CQo/2Xp5TBpSBl2F/MjfCudAa/XqJakZO27
UMi5lH8DALYNek4dckyfvt7cVHfeCma0ho77V9AscChFtnAnv74sJyEK
=ADO8
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20260621' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Use wakeup mailbox to boot APs in Hyper-V VTL2 TDX guests (Yunhong
Jiang, Ricardo Neri)
- Move the Hyper-V IOMMU to its own subdirectory (Mukesh Rathor)
- Cosmetic changes to mshv and balloon driver (Junrui Luo, Markus
Elfring)
* tag 'hyperv-next-signed-20260621' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
mshv: add bounds check on vp_index in mshv_intercept_isr()
hv_balloon: Simplify data output in hv_balloon_debug_show()
x86/hyperv: Cosmetic changes in irqdomain.c for readability
iommu/hyperv: Create hyperv subdirectory under drivers/iommu
x86/hyperv/vtl: Use the wakeup mailbox to boot secondary CPUs
x86/hyperv/vtl: Mark the wakeup mailbox page as private
x86/acpi: Add a helper to get the address of the wakeup mailbox
x86/hyperv/vtl: Setup the 64-bit trampoline for TDX guests
x86/realmode: Make the location of the trampoline configurable
x86/hyperv/vtl: Set real_mode_header in hv_vtl_init_platform()
x86/dt: Parse the Wakeup Mailbox for Intel processors
dt-bindings: reserved-memory: Wakeup Mailbox for Intel processors
x86/acpi: Add functions to setup and access the wakeup mailbox
x86/topology: Add missing struct declaration and attribute dependency
Convert the Epson RX6110 Real Time Clock devicetree binding
from the legacy text format to DT schema.
Signed-off-by: Udaya Kiran Challa <challauday369@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260514173851.25088-1-challauday369@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
- Extend SPI NAND continuous read to Winbond devices, which requires
numerous changes in the spi-{mem,nand} layers such as the need for a
secondary read operation template.
- Continuous reads in general have also been enhanced/fixed for avoiding
potential issues at probe time and at block boundaries.
SPI NOR changes:
- Big set of cleanups and improvements to the locking support. This
series contains some cleanups and bug fixes for code and documentation
around write protection. Then support is added for complement locking,
which allows finer grained configuration of what is considered locked
and unlocked. Then complement locking is enabled on a bunch of Winbond
W25 flashes.
- Fix die erase support on Spansion flashes. Die erase is only supported
on multi-die flashes, but the die erase opcode was set for all. When
the opcode is set, it overrides the default chip erase opcode which
should be used for single-die flashes. Only set the opcode on
multi-die flashes. Also, the opcode was not set on multi-die s28hx-t
flashes. Set it so they can use die-erase correctly.
General changes:
- A few drivers and mappings have been removed following SoCs support
removal.
- And again, there is the usual load of misc improvements and fixes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmo3/r8ACgkQJWrqGEe9
VoQcbgf/c6g4W+83hH9E+/6p2CvAFt1SdVSkR5wLG7duZjD1uhSqlHNEOW2auNMn
fdzgaXr/XmOP0Saob2LV8nNMWDJ2oWmqvJ065obK/Aj+BTDZwPaeMDDxdjMKTxkk
kOzqE7HuBrIotAMtsEpiMm1sGjRQYSQpVFfWmCMANWGnU44aaqGfGWKQVV/ZNlZK
YToLnjHdB8B0jU8FtJEbJoG7UeM2WFGp1/Ok8E7Tci47JklDybYauJnICDkwHSv/
UcdR0QdiOw1K2pRx9Ja/YIOmr7JmZ1ERX1bEI5Um9dsGUeAhB5Vd0YrKLiX1o98W
ygLyTPRTuKNihN7tr5ZLWoNrD5pzUg==
=6rG2
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"NAND changes:
- Extend SPI NAND continuous read to Winbond devices, which requires
numerous changes in the spi-{mem,nand} layers such as the need for
a secondary read operation template
- Continuous reads in general have also been enhanced/fixed for
avoiding potential issues at probe time and at block boundaries
SPI NOR changes:
- Big set of cleanups and improvements to the locking support.
This series contains some cleanups and bug fixes for code and
documentation around write protection. Then support is added for
complement locking, which allows finer grained configuration of
what is considered locked and unlocked. Then complement locking is
enabled on a bunch of Winbond W25 flashes
- Fix die erase support on Spansion flashes.
Die erase is only supported on multi-die flashes, but the die erase
opcode was set for all. When the opcode is set, it overrides the
default chip erase opcode which should be used for single-die
flashes. Only set the opcode on multi-die flashes. Also, the opcode
was not set on multi-die s28hx-t flashes. Set it so they can use
die-erase correctly
General changes:
- A few drivers and mappings have been removed following SoCs support
removal
- And again, there is the usual load of misc improvements and fixes"
* tag 'mtd/for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (63 commits)
mtd: cfi: Use common error handling code in two functions
mtd: slram: simplify register_device() cleanup
mtd: slram: remove failed entries from the device list
mtd: rawnand: ndfc: use ioread32be/iowrite32be and allow COMPILE_TEST
mtd: spi-nor: spansion: add die erase support in s28hx-t
mtd: spi-nor: spansion: use die erase for multi-die devices only
mtd: spi-nor: winbond: Add W25Q02NWxxIM CMP locking support
mtd: spi-nor: winbond: Add W25Q01NWxxIM CMP locking support
mtd: spi-nor: winbond: Add W25Q01NWxxIQ CMP locking support
mtd: spi-nor: winbond: Add W25H02NWxxAM CMP locking support
mtd: spi-nor: winbond: Add W25H01NWxxAM CMP locking support
mtd: spi-nor: winbond: Add W25H512NWxxAM CMP locking support
mtd: spi-nor: Add steps for testing locking with CMP
mtd: spi-nor: swp: Add support for the complement feature
mtd: spi-nor: Add steps for testing locking support
mtd: maps: remove obsolete impa7 map driver
mtd: maps: remove uclinux map driver
mtd: maps: remove AMD Élan specific drivers
mtd: inftlmount: convert printk(KERN_WARNING) to pr_warn
mtd: Consistently define pci_device_ids
...
Only ufs driver updates this time, apart from which this is just an
assortment of bug fixes and AI assisted changes. The biggest other
change is the reversion of the sas_user_scan patch which supported a
mpi3mr NVME behaviour but caused major issues for other sas
controllers. The next biggest is the removal of target reset in
tcm_loop.c.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCajfkNxsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIUNpAD+LZEfeMQpNZrEd4Ug/1IGHjnDvEnGp3Wx
lDfSEVqLqfABAIKqL0npb+kjgdkGT3IuugIboX27/XDBcCb6mPQdXIst
=6T7N
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Only ufs driver updates this time, apart from which this is just an
assortment of bug fixes and AI assisted changes.
The biggest other change is the reversion of the sas_user_scan patch
which supported a mpi3mr NVME behaviour but caused major issues for
other sas controllers. The next biggest is the removal of target reset
in tcm_loop.c"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (56 commits)
scsi: target: Remove tcm_loop target reset handling
scsi: lpfc: Fix spelling mistakes in comments
scsi: ufs: ufs-pci: Add AMD device ID support
scsi: ufs: core: Handle PM commands timeout before SCSI EH
scsi: devinfo: Broaden Promise VTrak E310/E610 identification
scsi: target: Use constant-time crypto_memneq() for CHAP digests
scsi: target: Fix hexadecimal CHAP_I handling
scsi: scsi_debug: Fix one-partition tape setup bounds
scsi: ufs: qcom: dt-bindings: Document the Hawi UFS controller
scsi: mailmap: Update Avri Altman's email address
scsi: ufs: Remove redundant vops NULL check and trivial wrapper
scsi: ufs: Remove unnecessary return in void vops wrappers
scsi: ufs: Fix wrong value printed in unexpected UPIU response case
scsi: ufs: core: Fix NULL pointer dereference in scsi_cmd_priv() calls
scsi: megaraid_mbox: Avoid double kfree()
scsi: pm8001: Fix error code in non_fatal_log_show()
scsi: lpfc: Turn lpfc_queue q_pgs into a flexible array
scsi: ufs: core: Skip link param validation when lanes_per_direction is unset
scsi: sas: Skip opt_sectors when DMA reports no real optimization hint
scsi: Revert "scsi: Fix sas_user_scan() to handle wildcard and multi-channel scans"
...
Add i.MX94 support to the i.MX remoteproc driver, covering the Cortex-M7
and Cortex-M33 Sync cores. This also fixes programming of non-zero System
Manager CPU/LMM reset vectors.
Move the remoteproc resource table definitions to a separate header, so
they can be used by clients that do not otherwise depend on remoteproc.
Switch the firmware resource handling over to the common iterator.
Update the Xilinx R5F remoteproc driver to check the remote core state
before attaching, drop a binding header dependency, and add
firmware-name based auto boot support.
Add Qualcomm Hawi ADSP/CDSP bindings, together with Shikra RPM bindings
and CDSP, LPAICP, and MPSS PAS support. Fix a Qualcomm minidump leak,
clean up PAS and WCSS reset handling, and make the user-visible Qualcomm
naming consistent.
Remove a duplicate STM32_RPROC Kconfig dependency and make i.MX
remoteproc instances use the device node name so multiple processors can
be distinguished in sysfs.
-----BEGIN PGP SIGNATURE-----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=6cLo
-----END PGP SIGNATURE-----
Merge tag 'rproc-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- Add i.MX94 support to the i.MX remoteproc driver, covering the
Cortex-M7 and Cortex-M33 Sync cores. This also fixes programming of
non-zero System Manager CPU/LMM reset vectors.
- Move the remoteproc resource table definitions to a separate header,
so they can be used by clients that do not otherwise depend on
remoteproc. Switch the firmware resource handling over to the common
iterator.
- Update the Xilinx R5F remoteproc driver to check the remote core
state before attaching, drop a binding header dependency, and add
firmware-name based auto boot support.
- Add Qualcomm Hawi ADSP/CDSP bindings, together with Shikra RPM
bindings and CDSP, LPAICP, and MPSS PAS support. Fix a Qualcomm
minidump leak, clean up PAS and WCSS reset handling, and make the
user-visible Qualcomm naming consistent.
- Remove a duplicate STM32_RPROC Kconfig dependency and make i.MX
remoteproc instances use the device node name so multiple processors
can be distinguished in sysfs.
* tag 'rproc-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: qcom: pas: Drop start/stop completion from struct qcom_pas
remoteproc: qcom: pas: Add Shikra remoteproc support
dt-bindings: remoteproc: qcom,shikra-pas: Document Shikra PAS remoteprocs
dt-bindings: remoteproc: Add Shikra RPM processor compatible
remoteproc: qcom: Unify user-visible "Qualcomm" name
remoteproc: qcom: Fix leak when custom dump_segments addition fails
remoteproc: qcom_q6v5_wcss: drop redundant wcss_q6_bcr_reset
dt-bindings: remoteproc: qcom,sm8550-pas: Add Hawi CDSP compatible
dt-bindings: remoteproc: qcom,sm8550-pas: Add Hawi ADSP compatible
remoteproc: xlnx: Enable auto boot feature
dt-bindings: remoteproc: xlnx: Add firmware-name property
remoteproc: xlnx: Remove binding header dependency
remoteproc: imx_rproc: Use device node name as processor name
remoteproc: use rsc_table_for_each_entry() in rproc_handle_resources()
remoteproc: Move resource table data structure to its own header
remoteproc: xlnx: Check remote core state
remoteproc: imx_rproc: Add support for i.MX94
remoteproc: imx_rproc: Program non-zero SM CPU/LMM reset vector
dt-bindings: remoteproc: imx-rproc: Support i.MX94
remoteproc: Dead code cleanup in Kconfig for STM32_RPROC
* power-supply drivers
- surface-rt-ec: new EC driver providing battery info for Microsoft Surface RT
- s2m-charger: new driver for battery charger in Samsung S2M PMICs
- max17042: rework driver
- bd71828: sysfs for auto input current limitation
- use named fields for struct platform_device_id and of_device_id entries
- misc. small cleanups and fixes
* reset drivers
- use named fields for struct platform_device_id and of_device_id entries
- misc. small cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=dzFy
-----END PGP SIGNATURE-----
Merge tag 'for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply drivers:
- New EC driver providing battery info for Microsoft Surface RT
- New driver for battery charger in Samsung S2M PMICs
- Rework max17042 driver
- sysfs control for bd71828 auto input current limitation
All over:
- Use named fields for struct platform_device_id and of_device_id
entries
- Misc small cleanups and fixes"
* tag 'for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (33 commits)
Documentation: ABI: sysfs-class-reboot-mode-reboot_modes: fix doc warnings
power: supply: charger-manager: fix refcount leak in is_full_charged()
power: supply: core: fix supplied_from allocations
power: supply: max17042_battery: Use modern PM ops to clear up warning
power: supply: add support for Samsung S2M series PMIC charger device
power: supply: Add support for Surface RT battery and charger
dt-bindings: embedded-controller: Document Surface RT EC
power: supply: bd71828: sysfs for auto input current limitation
power: supply: cpcap-charger: include missing <linux/property.h>
power: supply: cros_charge-control: Move MODULE_DEVICE_TABLE next to the table itself
power: supply: ab8500_fg: Fix typos in comments
power: supply: Use named initializers for arrays of i2c_device_data
power: supply: Remove unused jz4740-battery.h
power: reset: st-poweroff: Use of_device_get_match_data()
power: supply: bq257xx: Add fields for 'charging' and 'overvoltage' states
power: supply: bq257xx: Consistently use indirect get/set helpers
power: supply: bq257xx: Make the default current limit a per-chip attribute
power: supply: bq257xx: Fix VSYSMIN clamping logic
power: supply: cpcap-battery: Fix missing nvmem_device_put() causing reference leak
power: supply: max17042: fix OF node reference imbalance
...
Add a new compatible string "starfive,jhb100-spi" for the StarFive
JHB100 SPI, it based on the Synopsys DesignWare SSI version 2.00a,
uses snps,dwc-ssi-2.00a as the primary fallback and snps,dwc-ssi-1.01a
as the secondary fallback.
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260619143443.22267-2-changhuang.liang@starfivetech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Add OF helpers for parsing the power-domains-child-ids property
- Extend the power domain DT binding with power-domains-child-ids
- Switch to use the dynamic root device
pmdomain providers:
- arm: Add support for domain hierarchies to SCMI power domains
- qcom: Add power domains for the Shikra and Nord SoCs
- sunxi: Fix GPU support on Radxa Cubie A7Z by keeping power domain on
-----BEGIN PGP SIGNATURE-----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=2hQV
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add OF helpers for parsing the power-domains-child-ids property
- Extend the power domain DT binding with power-domains-child-ids
- Switch to use the dynamic root device
pmdomain providers:
- arm: Add support for domain hierarchies to SCMI power domains
- qcom: Add power domains for the Shikra and Nord SoCs
- sunxi: Fix GPU support on Radxa Cubie A7Z by keeping power domain on"
* tag 'pmdomain-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: core: fix unused variable warning with !PM_GENERIC_DOMAINS_OF
pmdomain: core: fix early domain registration
pmdomain: mediatek: mfg: move __packed after struct name to fix kernel-doc
pmdomain: qcom: rpmpd: Add Shikra RPM Power Domains
pmdomain: qcom: rpmhpd: Add power domains for Nord SoC
dt-bindings: power: qcom,rpmpd: document the Shikra RPM Power Domains
pmdomain: sunxi: support power domain flags for pck600
pmdomain: core: switch to dynamic root device
pmdomain: qcom: Unify user-visible "Qualcomm" name
dt-bindings: power: qcom,rpmhpd: Add RPMh power domain for Nord SoC
dt-bindings: power: qcom,rpmhpd: Fix whitespace in RPMHPD defines
pmdomain: arm_scmi: add support for domain hierarchies
pmdomain: core: add support for power-domains-child-ids
dt-bindings: power: Add power-domains-child-ids property
Core changes:
- Add new generic callbacks to populate per-pin pin controllers creating
groups and functions from the device tree building out
pinctrl_generic_to_map() and move the Spacemit driver over to use this.
- Generic board-level pin control driver using the mux framework.
New drivers:
- Amlogic (meson) A9 SoC pin controller.
- Aspeed AST2700 SoC0 and SoC1 pin controllers.
- nVidia Tegra264 pin controller.
- nVidia Tegra238 pin controller.
- Qualcomm Nord TLMM pin controller.
- Qualcomm Shikra TLMM pin controller.
- Qualcomm SM6350 LPASS LPI pin controller.
- Qualcomm IPQ9650 TLMM pin controller.
- Renesas RZ/G3L SoC pin controller.
- UltraRISC DP1000 pin controller.
Improvements:
- Handle pull up/pull down properly in the Renesas RZG2L driver.
- Fix up nVidia Tegra 234 DT bindings.
- Fix up pin definitions in the Qualcomm Eliza driver.
- Qualcomm PM8010 GPIO support in the PM8010 pin controller.
- Qualcomm SM6115 EGPIO support in the SM6115 pin controller.
- Switch Qualcomm LPASS LPI drivers to use runtime PM for power management.
- Clean up the Qualcomm Kconfig business a bit to include the necessary
drivers for each subarch.
- Fix output glitch in the Amlogic (meson) A4 pin controller.
- Move the Airoha driver from the Mediatek directory to its own directory.
It is too different from other Mediatek hardware.
- A slew of fixes to the Airoha AN7581 and AN7583 drivers.
-----BEGIN PGP SIGNATURE-----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=5CSf
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- Add new generic callbacks to populate per-pin pin controllers
creating groups and functions from the device tree building out
pinctrl_generic_to_map() and move the Spacemit driver over to use
this
- Generic board-level pin control driver using the mux framework
New pin controller drivers:
- Amlogic (meson) A9 SoC
- Aspeed AST2700 SoC0 and SoC1
- nVidia Tegra264 and Tegra238
- Qualcomm Nord TLMM, Shikra TLMM, SM6350 LPASS LPI, and IPQ9650 TLMM
- Renesas RZ/G3L SoC
- UltraRISC DP1000
Improvements:
- Handle pull up/pull down properly in the Renesas RZG2L driver
- Fix up nVidia Tegra 234 DT bindings
- Fix up pin definitions in the Qualcomm Eliza driver
- Qualcomm PM8010 GPIO support in the PM8010
- Qualcomm SM6115 EGPIO support in the SM6115
- Switch Qualcomm LPASS LPI drivers to use runtime PM for power
management
- Clean up the Qualcomm Kconfig business a bit to include the
necessary drivers for each subarch
- Fix output glitch in the Amlogic (meson) A4 pin controller
- Move the Airoha driver from the Mediatek directory to its own
directory. It is too different from other Mediatek hardware
- A slew of fixes to the Airoha AN7581 and AN7583 drivers"
* tag 'pinctrl-v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (151 commits)
pinctrl: Export pinctrl_get_group_selector()
pinctrl: Match DT helper types
pinctrl: qcom: Register functions before enabling pinctrl
pinctrl: meson: amlogic-a4: use nolock get range
pinctrl: ultrarisc: Add UltraRISC DP1000 pinctrl driver
dt-bindings: pinctrl: Add UltraRISC DP1000 pinctrl controller
pinctrl: qcom: Remove unused macro definitions
pinctrl: tegra: PINCTRL_TEGRA264 should depend on ARCH_TEGRA
pinctrl: tegra: PINCTRL_TEGRA238 should depend on ARCH_TEGRA
pinctrl: tegra238: add missing AON pin groups
dt-bindings: pinctrl: tegra238: add missing AON pin groups
pinctrl: airoha: an7583: remove undefined groups from pcm_spi pin function
pinctrl: airoha: an7583: fix phy1_led1 pin function
pinctrl: airoha: an7583: add missed gpio22 pin group
pinctrl: airoha: an7583: fix gpio21 pin group
pinctrl: airoha: fix pwm pin function for an7581 and an7583
pinctrl: airoha: an7583: fix incorrect led mapping in phy4_led1 pin function
pinctrl: airoha: an7581: fix incorrect led mapping in phy4_led1 pin function
pinctrl: airoha: an7583: fix misprint in gpio19 pinconf
pinctrl: airoha: an7581: fix misprint in gpio19 pinconf
...
- New Support & Features
- Maxim MAX25014: Add support for the Maxim MAX25014 4-channel automotive grade
backlight driver IC
- Improvements & Fixes
- Maintainers: Add the Congatec Board Controller backlight driver to its corresponding
entry
- Congatec Board Controller: Remove redundant X86 dependency from the backlight driver
- Kinetic KTD2801: Enable BL_CORE_SUSPENDRESUME to ensure the chip is powered off
during suspend
- Cleanups & Refactoring
- Core: Use named initializers for i2c_device_id arrays to improve readability and
robustness
- Device Tree Binding Updates
- Maxim MAX25014: Add device tree bindings for the Maxim MAX25014 backlight controller
-----BEGIN PGP SIGNATURE-----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=6Es2
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Support & Features:
- Maxim MAX25014: Add support for the Maxim MAX25014 4-channel
automotive grade backlight driver IC
Improvements & Fixes:
- Maintainers: Add the Congatec Board Controller backlight driver to
its corresponding entry
- Congatec Board Controller: Remove redundant X86 dependency from the
backlight driver
- Kinetic KTD2801: Enable BL_CORE_SUSPENDRESUME to ensure the chip is
powered off during suspend
Cleanups & Refactoring:
- Core: Use named initializers for i2c_device_id arrays to improve
readability and robustness
Device Tree Binding Updates:
- Maxim MAX25014: Add device tree bindings for the Maxim MAX25014
backlight controller"
* tag 'backlight-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: Use named initializers for arrays of i2c_device_data
MAINTAINERS: Add cgbc backlight driver
backlight: cgbc: Remove redundant X86 dependency
backlight: Add max25014atg backlight
dt-bindings: backlight: Add max25014 support
backlight: ktd2801: Enable BL_CORE_SUSPENDRESUME
- New Support & Features
- Samsung S2MU005: Add support for the Samsung S2MU005 PMIC which includes flash and
RGB LED controllers
- Texas Instruments LP5812: Add support for the TI LP5812 LED driver
- Texas Instruments LP5860: Add support for the Texas Instruments LP5860 LED matrix
driver via SPI
- Improvements & Fixes
- Core: Adjust the brightness sysfs node documentation to clarify that only decimal
values are accepted
- Core: Fix a race condition in the software blink logic when stopping blinking and
setting brightness simultaneously
- Core: Introduce the `multi_max_intensity` sysfs attribute for multicolor LEDs to
support hardware-based global brightness control
- Core: Replace OF-based device lookup with firmware node equivalents to support ACPI
and software nodes
- Core: Return `ENODATA` when reading brightness from hardware-controlled LEDs
- Core: Set the coherent DMA mask to zero for the Samsung PMIC device to suppress
unnecessary "DMA mask not set" messages
- ams OSRAM AS3668: Fix a Kconfig symbol name mismatch in the Makefile that prevented
the driver from being built
- BlinkM: Fix spelling and comment style issues in the driver
- DAC124S085: Declare the SPI command word as `__le16` to ensure correct endianness
and pass sparse checks
- GPIO Trigger: Use `GPIOD_FLAGS_BIT_NONEXCLUSIVE` to allow sharing GPIOs between the
LED trigger and other drivers
- NXP PCA9532: Fix an issue where the LED would stop blinking when changing brightness
to a non-zero value
- Qualcomm: Unify the user-visible company name to "Qualcomm" across flash LED config
options
- Qualcomm LPG: Optimize memory allocation by combining main structure and channels
into a single allocation using flexible array members
- Texas Instruments LP5860: Add missing `CONFIG_OF` dependency to prevent build
warnings
- TI TPS6131x: Increase the overvoltage protection threshold to 6V to avoid false
triggers with 5V input supplies
- Userspace LEDs (uLEDs): Fix a potential buffer overread by using `strnchr()` for
name string validation
- Userspace LEDs (uLEDs): Return `-EFAULT` on `copy_to_user()` failure to properly
handle read errors
- Cleanups & Refactoring
- Core: Convert various `i2c_device_id` arrays to use named initializers for improved
robustness and readability
- Multi-color Core: Fix incorrect `KernelVersion` and `Date` tags for the
`multi_max_intensity` ABI
- Broadcom BCM63138 / ChromeOS EC: Move `MODULE_DEVICE_TABLE` declarations next to the
ID tables for consistency
- LP5812: Fix a sysfs ABI reference in the documentation
- ST1202: Remove an unused legacy GPIO header include
- Device Tree Binding Updates
- Class: Document the keyboard backlight LED class naming conventions, including a new
scheme for zoned backlights
- Core: Dual-license the common LED bindings header under GPLv2 and BSD-2-Clause
- IR SPI LED: Add a new 30% duty-cycle value for the IR transmitter used in Xiaomi
Redmi Note 8
- Samsung S2M series: Document the flash LED device bindings for Samsung S2M series
PMICs
- Samsung S2M series: Document the pattern behavior for Samsung S2M series PMIC RGB
LEDs
- Samsung S2MU005: Add device tree bindings for the S2MU005 PMIC, including its flash
and RGB LED sub-devices
- TI LM3560: Document the TI LM3559 and LM3560 synchronous boost flash drivers
-----BEGIN PGP SIGNATURE-----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=zlOu
-----END PGP SIGNATURE-----
Merge tag 'leds-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"New Support & Features:
- Samsung S2MU005: Add support for the Samsung S2MU005 PMIC which
includes flash and RGB LED controllers
- Texas Instruments:
- LP5812: Add support for the TI LP5812 LED driver
- LP5860: Add support for the Texas Instruments LP5860 LED matrix
driver via SPI
Improvements & Fixes:
- Core:
- Adjust the brightness sysfs node documentation to clarify that
only decimal values are accepted
- Fix a race condition in the software blink logic when stopping
blinking and setting brightness simultaneously
- Introduce the `multi_max_intensity` sysfs attribute for
multicolor LEDs to support hardware-based global brightness
control
- Replace OF-based device lookup with firmware node equivalents
to support ACPI and software nodes
- Return `ENODATA` when reading brightness from
hardware-controlled LEDs
- Set the coherent DMA mask to zero for the Samsung PMIC device
to suppress unnecessary "DMA mask not set" messages
- ams OSRAM AS3668: Fix a Kconfig symbol name mismatch in the
Makefile that prevented the driver from being built
- BlinkM: Fix spelling and comment style issues in the driver
- DAC124S085: Declare the SPI command word as `__le16` to ensure
correct endianness and pass sparse checks
- GPIO Trigger: Use `GPIOD_FLAGS_BIT_NONEXCLUSIVE` to allow sharing
GPIOs between the LED trigger and other drivers
- NXP PCA9532: Fix an issue where the LED would stop blinking when
changing brightness to a non-zero value
- Qualcomm: Unify the user-visible company name to "Qualcomm" across
flash LED config options
- Qualcomm LPG: Optimize memory allocation by combining main
structure and channels into a single allocation using flexible
array members
- Texas Instruments
- LP5860: Add missing `CONFIG_OF` dependency to prevent build
warnings
- TPS6131x: Increase the overvoltage protection threshold to 6V
to avoid false triggers with 5V input supplies
- Userspace LEDs (uLEDs):
- Fix a potential buffer overread by using `strnchr()` for name
string validation
- Return `-EFAULT` on `copy_to_user()` failure to properly handle
read errors
Cleanups & Refactoring:
- Core:
- Convert various `i2c_device_id` arrays to use named
initializers for improved robustness and readability
- Multi-color: Fix incorrect `KernelVersion` and `Date` tags for
the `multi_max_intensity` ABI
- Broadcom BCM63138 / ChromeOS EC: Move `MODULE_DEVICE_TABLE`
declarations next to the ID tables for consistency
- LP5812: Fix a sysfs ABI reference in the documentation
- ST1202: Remove an unused legacy GPIO header include
Device Tree Binding Updates:
- Class: Document the keyboard backlight LED class naming
conventions, including a new scheme for zoned backlights
- Core: Dual-license the common LED bindings header under GPLv2
and BSD-2-Clause
- IR SPI LED: Add a new 30% duty-cycle value for the IR transmitter
used in Xiaomi Redmi Note 8
- Samsung S2M series:
- Document the flash LED device bindings for Samsung S2M series
PMICs
- Document the pattern behavior for Samsung S2M series PMIC RGB
- S2MU005: Add device tree bindings for the S2MU005 PMIC,
including its flash and RGB LED sub-devices
- TI LM3560: Document the TI LM3559 and LM3560 synchronous boost
flash drivers"
* tag 'leds-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (30 commits)
leds: tps6131x: Increase overvoltage protection threshold to 6V
leds: Fix sysfs ABI date
leds: Fix CONFIG_OF dependency for LEDS_LP5860_CORE
leds: uleds: Fix potential buffer overread
leds: Use named initializers for arrays of i2c_device_data
leds: uleds: Return -EFAULT on copy_to_user() failure
leds: core: Report ENODATA for brightness of hardware controlled LED
leds: class: Use firmware nodes for device lookup
Documentation: leds: Document pattern behavior of Samsung S2M series PMIC RGB LEDs
leds: rgb: Add support for Samsung S2M series PMIC RGB LED device
leds: flash: Add support for Samsung S2M series PMIC flash LED device
dt-bindings: leds: Document Samsung S2M series PMIC flash LED device
leds: core: Fix race condition for software blink
leds: Adjust documentation of brightness sysfs node
leds: dac124s085: Declare SPI command word as __le16
leds: Introduce the multi_max_intensity sysfs attribute
dt-bindings: leds: Document TI LM3560 Synchronous Boost Flash Driver
leds: bcm63138/cros_ec: Move MODULE_DEVICE_TABLE next to the table itself
leds: Add support for TI LP5860 LED driver chip
Documentation: leds: leds-class: Document keyboard backlight LED class naming
...
- New Support & Features
- Renesas RSMU: Add support for the IDT 8a34002 Clock Matrix
- Samsung S2MU005: Add support for the Samsung S2MU005 PMIC which includes charger,
MUIC, flash and RGB LED controllers
- SpacemiT P1: Add a reboot cell for the SpacemiT P1 chip
- Texas Instruments BQ25792: Add support for the TI BQ25792 charger manager
- Improvements & Fixes
- Core: Unify the user-visible company name to "Qualcomm" across various config
options
- ChromeOS EC: Delay `dev_set_drvdata()` until the probe process has successfully
completed to avoid use-after-free issues
- ChromeOS EC: Prevent adding `cros_ec_ucsi` as an MFD sub-device if it is already
defined in Device Tree or ACPI
- Cirrus Logic CS42L43: Add a sanity check for firmware size to prevent out-of-bounds
memory access during firmware loading
- Cirrus Logic CS5535: Associate the GPIO cell with a dedicated software node to
support board files requesting GPIOs
- Maxim MAX77620: Modernize poweroff handling by converting to the sys-off API
- Qualcomm RPM: Add the missing QDSS clock resource for the MSM8960 SoC
- Renesas RSMU: Fix page register setup for the 8A3400x family by correctly
calculating the page address
- Renesas RZ/MTU3: Make the reset line optional to support newer SoC variants (RZ/T2H,
RZ/N2H)
- Renesas RZ/MTU3: Modernize the driver by using device-managed APIs for reset control
and device addition
- Samsung Core: Set the coherent DMA mask to zero for the Samsung PMIC device to
suppress unnecessary "DMA mask not set" messages
- Silicon Motion SM501: Fix a reference leak on failed device registration by properly
dropping the platform device reference
- Texas Instruments TPS65219: Make poweroff handler registration conditional on the
"system-power-controller" Device Tree property
- Texas Instruments TPS6586x: Fix Device Tree node reference counting by manually
bumping the refcount for sub-devices
- Texas Instruments TPS65910: Add return value checking for the dummy I2C transfer
used to work around silicon erratum SWCZ010
- Texas Instruments TWL4030: Update board-specific checks to use Device Tree
compatibles instead of legacy machine IDs
- Cleanups & Refactoring
- Core: Consistently define `pci_device_id` arrays using named initializers across
various Intel and Silicon Motion drivers
- Maintainers: Shift maintenance of Samsung PMIC drivers to André Draszik
- Maxim MAX77759: Improve code style by reformatting the IRQ table and refining macro
comments
- MEN MENF21BMC / Texas Instruments TWL: Correctly treat `i2c_check_functionality()`
as returning a boolean status
- Rohm BD72720: Drop the non-existent BUCK11 ID to improve code clarity
- Silicon Labs Si476x: Fix various spelling mistakes in driver comments
- Spreadtrum SC27xx: Transition to `devm_mfd_add_devices()` and separate MFD cell
tables for each PMIC model
- Timberdale: Move GPIO pin definitions into the driver and transition to using a
software node for the GPIO cell
- Wolfson WM8994: Remove dead legacy-GPIO code and its associated `irq_gpio` member
- Device Tree Binding Updates
- Aspeed AST2x00: Document the AST2700 SCU0 and add support for its SoC0/SoC1 pin
controllers
- Hisilicon Hi655x: Convert the Hi655x PMIC binding from text format to YAML DT schema
- Khadas MCU: Add a new compatible and fan-supply property for the Khadas VIM4 MCU
- MediaTek MT6397: Add support for the MT6365 PMIC and document regulator supplies for
the MT6359 variant
- Qualcomm TCSR: Add compatibles for Nord and IPQ5210 TCSR blocks
- Renesas RZ/G3L: Revert the addition of the `renesas,r9a08g046-lvds-cmn` compatible
string due to documentation errors
- Samsung S2MU005: Document the S2MU005 PMIC and its sub-devices (charger, MUIC,
flash and RGB LEDs)
- Spreadtrum SC2731: Include regulator bindings for the SC2730 variant
- STMPE: Fix the schema by marking 'compatible' and '#pwm-cells' as required for the
PWM subnode
- Texas Instruments BQ257xx: Expand the BQ25703A binding to include the BQ25792
variant
- Removals
- Motorola EZX PCAP: Remove the unused and non-functional driver for Motorola EZX
phones
-----BEGIN PGP SIGNATURE-----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=9Igx
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Support & Features:
- Renesas RSMU: Add support for the IDT 8a34002 Clock Matrix
- Samsung S2MU005: Add support for the Samsung S2MU005 PMIC which
includes charger, MUIC, flash and RGB LED controllers
- SpacemiT P1: Add a reboot cell for the SpacemiT P1 chip
- Texas Instruments BQ25792: Add support for the TI BQ25792 charger
manager
Improvements & Fixes:
- Core: Unify the user-visible company name to "Qualcomm" across
various config options
- ChromeOS EC:
- Delay `dev_set_drvdata()` until the probe process has
successfully completed to avoid use-after-free issues
- Prevent adding `cros_ec_ucsi` as an MFD sub-device if it is
already defined in Device Tree or ACPI
- Cirrus Logic CS42L43: Add a sanity check for firmware size to
prevent out-of-bounds memory access during firmware loading
- Cirrus Logic CS5535: Associate the GPIO cell with a dedicated
software node to support board files requesting GPIOs
- Maxim MAX77620: Modernize poweroff handling by converting to the
sys-off API
- Qualcomm RPM: Add the missing QDSS clock resource for the MSM8960
SoC
- Renesas RSMU: Fix page register setup for the 8A3400x family by
correctly calculating the page address
- Renesas RZ/MTU3:
- Make the reset line optional to support newer SoC variants
(RZ/T2H, RZ/N2H)
- Modernize the driver by using device-managed APIs for reset
control and device addition
- Samsung Core: Set the coherent DMA mask to zero for the Samsung
PMIC device to suppress unnecessary "DMA mask not set" messages
- Silicon Motion SM501: Fix a reference leak on failed device
registration by properly dropping the platform device reference
- Texas Instruments:
- TPS65219: Make poweroff handler registration conditional on the
"system-power-controller" Device Tree property
- TPS6586x: Fix Device Tree node reference counting by manually
bumping the refcount for sub-devices
- TPS65910: Add return value checking for the dummy I2C transfer
used to work around silicon erratum SWCZ010
- TWL4030: Update board-specific checks to use Device Tree
compatibles instead of legacy machine IDs
Cleanups & Refactoring:
- Core: Consistently define `pci_device_id` arrays using named
initializers across various Intel and Silicon Motion drivers
- Maintainers: Shift maintenance of Samsung PMIC drivers to André
Draszik
- Maxim MAX77759: Improve code style by reformatting the IRQ table
and refining macro comments
- MEN MENF21BMC / Texas Instruments TWL: Correctly treat
`i2c_check_functionality()` as returning a boolean status
- Rohm BD72720: Drop the non-existent BUCK11 ID to improve code
clarity
- Silicon Labs Si476x: Fix various spelling mistakes in driver
comments
- Spreadtrum SC27xx: Transition to `devm_mfd_add_devices()` and
separate MFD cell tables for each PMIC model
- Timberdale: Move GPIO pin definitions into the driver and
transition to using a software node for the GPIO cell
- Wolfson WM8994: Remove dead legacy-GPIO code and its associated
`irq_gpio` member
Device Tree Binding Updates:
- Aspeed AST2x00: Document the AST2700 SCU0 and add support for its
SoC0/SoC1 pin controllers
- Hisilicon Hi655x: Convert the Hi655x PMIC binding from text format
to YAML DT schema
- Khadas MCU: Add a new compatible and fan-supply property for the
Khadas VIM4 MCU
- MediaTek MT6397: Add support for the MT6365 PMIC and document
regulator supplies for the MT6359 variant
- Qualcomm TCSR: Add compatibles for Nord and IPQ5210 TCSR blocks
- Renesas RZ/G3L: Revert the addition of the
`renesas,r9a08g046-lvds-cmn` compatible string due to documentation
errors
- Samsung S2MU005: Document the S2MU005 PMIC and its sub-devices
(charger, MUIC, flash and RGB LEDs)
- Spreadtrum SC2731: Include regulator bindings for the SC2730
variant
- STMPE: Fix the schema by marking 'compatible' and '#pwm-cells' as
required for the PWM subnode
- Texas Instruments BQ257xx: Expand the BQ25703A binding to include
the BQ25792 variant
Removals:
- Motorola EZX PCAP: Remove the unused and non-functional driver for
Motorola EZX phones"
* tag 'mfd-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (47 commits)
dt-bindings: mfd: syscon: Revert renesas,r9a08g046-lvds-cmn
dt-bindings: mfd: st,stmpe: Add missing properties for PWM subnode
mfd: rz-mtu3: Make reset optional
mfd: rz-mtu3: Store &pdev->dev in local variable
mfd: rz-mtu3: Use local variable for reset
mfd: rz-mtu3: Use device-managed APIs
dt-bindings: mfd: aspeed,ast2x00-scu: Support AST2700 SoC1 pinctrl
mfd: tps6586x: Fix OF node refcount
dt-bindings: mfd: sprd,sc2731: Include SC2730 regulator bindings
mfd: twl4030-power: Update checks for specific boards to use the DT
dt-bindings: mfd: qcom,tcsr: Document the IPQ5210 TCSR block
mfd: qcom_rpm: Add msm8960 QDSS clock resource
mfd: si476x-i2c: Fix spelling mistakes in comments
mfd: max77620: Convert poweroff support to sys-off API
mfd: dt-bindings: mt6397: Add regulator supplies
dt-bindings: mfd: mediatek: mt6397: Add MT6365 PMIC support
dt-bindings: mfd: mediatek: mt6397: Add rtc for MT6359
mfd: cs42l43: Sanity check firmware size
mfd: qcom: Unify user-visible "Qualcomm" name
mfd: cros_ec: Delay dev_set_drvdata() until probe success
...
When the backlight is managed by the panel controller IC, an external
power rail might be powering the backlight.
Add an optional `bl-supply` property to describe such power rail, thus
allow disabling the backlight.
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260608162622.403713-1-zhengxingda@iscas.ac.cn
Add binding for the Ilitek ILI9488 panel controller which is found on
the FocusLCDs E35GH-I-MW800-CB MIPI DSI panel. Add "focuslcds" to
vendor-prefixes.yaml as it's a brandname and a website
(https://focuslcds.com/) for Focus Display Solutions, Inc.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Igor Reznichenko <igor@reznichenko.net>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260617143245.372182-2-igor@reznichenko.net
The Chipone ICNA3512 and ICNA3520 DDICs are high refresh, low power
MIPI-DSI drivers for OLED panels. The icna3512 is used by the Ayn Odin 2
Portal and the Ayaneo Pocket DS top panel while the icna3520 is used by
the Ayn Thor top panel and the Ayn Odin 3.
These ddic's are generally compatible, but some MIPI vendor commands
differ between them, so they are not fully fallback compatible.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260607-icna35xx-v4-1-64de514add34@gmail.com
The panel used by Anbernic in the RG Vita-Pro is a DSI panel based
on the TD4310 controller IC. It measures approximately 5.5 inches
diagonally and is 1080x1920 in resolution.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260610144407.438846-4-macroalpha82@gmail.com
Including:
Core Code:
- Fix dma-iommu scatterlist length handling in the P2PDMA path.
- Extend the generic IOMMU page-table code with detailed gather
support for more precise invalidations.
- Add pending-gather tracking to generic page-table invalidation
handling.
- Add support for smaller virtual address sizes in the generic AMDv1
page-table format, including KUnit coverage.
- Fix page-size bitmap calculation for smaller VA configurations.
- Rework Arm io-pgtable allocation/freeing to consistently use the
iommu-pages API and address-conversion helpers.
- Add PCI ATS infrastructure for devices that require ATS, including
always-on ATS handling for pre-CXL devices.
AMD IOMMU:
- Fix several IOTLB invalidation details, including PDE handling,
flush-all behavior, and command address encoding.
- Honor IVINFO[VASIZE] when deriving address limits.
- Fix premature loop termination in init_iommu_one().
- Add Hygon family 18h model 4h IOAPIC support.
- Clean up legacy-mode handling, stale comments, dead IVMD
exclusion-range code, and unused address-size macros.
Arm SMMU / Arm SMMU v3:
- SMMUv2:
- Device-tree binding updates for Qualcomm Hawi, Nord and Shikra
SoCs.
- Constain the clocks which can be specified for recent Qualcomm
SoCs.
- Fix broken compatible string for Qualcomm prefetcher
configuration an add new entry for the Glymur MDSS.
- Ensure SMMU is powered-up when writing context bank for Adreno
client.
- SMMUv3:
- Fix off-by-one in queue allocation retry loop.
- Enable hardware update of access/dirty bits from the SMMU.
- Re-jig command construction to use separate inline helpers for
each command type.
Intel VT-d:
- Add the PCI segment number to DMA fault messages.
- Improve support for non-PRI mode SVA.
- Ensure atomicity during context entry teardown.
- Fix RB-tree corruption in the probe error path.
RISC-V IOMMU:
- Add NAPOT range invalidation support.
- Use detailed gather information for invalidation decisions.
- Compute the best stride for single invalidations.
- Advertise Svpbmt support to the generic page-table code.
- Add capability definitions and clean up command macro encoding.
VeriSilicon IOMMU:
- Add a new VeriSilicon IOMMU driver.
- Add devicetree binding documentation and MAINTAINERS coverage.
- Add the RK3588 VeriSilicon IOMMU node.
- Apply small cleanups and warning fixes in the new driver.
Rockchip IOMMU:
- Disable the fetch DTE time limit.
Apple DART:
- Correct a stale CONFIG_PCIE_APPLE macro name in a comment.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmoyS6IACgkQK/BELZcB
GuNS4BAAvA0o/fG6XDypkBRX/lIce2/2q+/iQCGNkyHxtzdD+gMBW+RS1HQ6lKqU
iKWhbiZIrSc9N/xK99Fi+3DSi1T5QjU6kdaNLH0nag5EwncbtlqmogsNwACJApiq
4f6hbql4rtkiwfX77L4qM5ko+lMMlA+GeHOpz46DUSAU6e/6xRJe0HECHeiJGJFo
KnE/KaZQVhbcMVPObbyCQB+J6MkrQNSVopQ7cxulnyIbddkhDmaA/q4Qna0y3/ik
ctDn5eouQF8OxhyrzGa7UFkaMjIfGCH/kY/x/avqg8q8iUelNo39OSQzKqXpR4A8
OhODTxQ3A3dVF2wAjcdxQFPCsSAd09k/t6UBM/4rsKe0P4Q06rIUwAPtJpMrontS
yQdG91F/9bIGUOa184spMxgrepr9VCx2vls+p28DavyOMjvtjshef1R+5Dl7vnW+
HibSDWbiy8VwQWy+QKCYMeFD1kKcJdaeaailbPtDOzJ8M0Ikm3nZ6+jIR9bQBfrr
NfiOSa+gkfSdCUv0SQ8Gie84gIVJOeiIHF3WsBzbpzx8rYGH7WdUGvsY2WTDcMCL
JqEQatT7u4fQGO5p3gbvmzawMMPNjhbdYFWaBs1Y3j0lS4FHqsTQlUhOKfzY2HCz
diSXFSKvurSyKPZzIrxTHIbpD7QvOoMmQYoAsjWi0PwMna2YUa8=
=hD8h
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core Code:
- Fix dma-iommu scatterlist length handling in the P2PDMA path
- Extend the generic IOMMU page-table code with detailed gather
support for more precise invalidations
- Add pending-gather tracking to generic page-table invalidation
handling
- Add support for smaller virtual address sizes in the generic AMDv1
page-table format, including KUnit coverage
- Fix page-size bitmap calculation for smaller VA configurations
- Rework Arm io-pgtable allocation/freeing to consistently use the
iommu-pages API and address-conversion helpers
- Add PCI ATS infrastructure for devices that require ATS, including
always-on ATS handling for pre-CXL devices
AMD IOMMU:
- Fix several IOTLB invalidation details, including PDE handling,
flush-all behavior, and command address encoding
- Honor IVINFO[VASIZE] when deriving address limits
- Fix premature loop termination in init_iommu_one()
- Add Hygon family 18h model 4h IOAPIC support
- Clean up legacy-mode handling, stale comments, dead IVMD
exclusion-range code, and unused address-size macros
Arm SMMU / Arm SMMU v3:
- SMMUv2:
- Device-tree binding updates for Qualcomm Hawi, Nord and Shikra
SoCs
- Constrain the clocks which can be specified for recent Qualcomm
SoCs
- Fix broken compatible string for Qualcomm prefetcher
configuration an add new entry for the Glymur MDSS
- Ensure SMMU is powered-up when writing context bank for Adreno
client
- SMMUv3:
- Fix off-by-one in queue allocation retry loop
- Enable hardware update of access/dirty bits from the SMMU
- Re-jig command construction to use separate inline helpers for
each command type
Intel VT-d:
- Add the PCI segment number to DMA fault messages
- Improve support for non-PRI mode SVA
- Ensure atomicity during context entry teardown
- Fix RB-tree corruption in the probe error path
RISC-V IOMMU:
- Add NAPOT range invalidation support
- Use detailed gather information for invalidation decisions
- Compute the best stride for single invalidations
- Advertise Svpbmt support to the generic page-table code
- Add capability definitions and clean up command macro encoding
VeriSilicon IOMMU:
- Add a new VeriSilicon IOMMU driver
- Add devicetree binding documentation and MAINTAINERS coverage
- Add the RK3588 VeriSilicon IOMMU node
- Apply small cleanups and warning fixes in the new driver
Rockchip IOMMU:
- Disable the fetch DTE time limit
Apple DART:
- Correct a stale CONFIG_PCIE_APPLE macro name in a comment"
* tag 'iommu-updates-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (66 commits)
iommu/dma-iommu: Fix wrong scatterlist length assignment in P2PDMA path
iommu/amd: Control INVALIDATE_IOMMU_PAGES PDE from the gather
iommu/amd: Make CMD_INV_IOMMU_ALL_PAGES_ADDRESS match the spec
iommu/amd: Have amd_iommu_domain_flush_pages() use last
iommu/amd: Pass last in through to build_inv_address()
iommu/amd: Simplify build_inv_address()
iommu/apple-dart: correct CONFIG_PCIE_APPLE macro name in comment
iommu/vt-d: Fix RB-tree corruption in probe error path
iommu/vt-d: Improve IOMMU fault information
iommu/vt-d: Remove typo from pasid_pte_config_nested()
iommu/vt-d: Clear Present bit before tearing down scalable-mode context entry
iommu/vt-d: Avoid WARNING in sva unbind path
dt-bindings: arm-smmu: Correct and add constraints for Hawi, Shikra and Kaanapali
dt-bindings: arm-smmu: Add compatible for Qualcomm Nord SoC
iommu/amd: Don't split flush for amd_iommu_domain_flush_all()
iommu/rockchip: disable fetch dte time limit
iommu/arm-smmu-v3: Allow ATS to be always on
PCI: Allow ATS to be always on for pre-CXL devices
PCI: Add pci_ats_required() for CXL.cache capable devices
iommu/vsi: Use list_for_each_entry()
...
DT core:
- Add support for handling multiple cells in "iommu-map" entries.
- Support only 1 entry in /reserved-memory "reg" entries. Support for
more than 1 entry has been broken.
- Fix a UAF on alloc_reserved_mem_array() failure
- Make "ibm,phandle" handling logic specific to PPC
- Use memcpy() instead of strcpy() for known length strings
- Ensure __of_find_n_match_cpu_property() handles malformed "reg"
entries
- Add various checks that expected strings are strings before accessing
them
- Drop redundant memset() when unflattening DT
DT bindings:
- Add a DTS style checker. Currently hooked up to dt_binding_check to
check examples.
- Convert st,nomadik platform, ti,omap-dmm, and ti,irq-crossbar
bindings to DT schema
- Add Apple System Management Controller hwmon, Qualcomm Hamoa Embedded
Controller, Qualcomm IPQ6018 PWM controller, fsl,mc1323, Samsung
SOFEF01-M DDIC panel, Freescale i.MX53 Television Encoder, Samsung S2M
series PMIC extcon, and MT6365 PMIC AuxADC schemas
- Extend bindings for QCom Maili and Nord PDC, QCom Hali fastrpc,
qcom,eliza-imem, qcom,oryon-1-5 CPU, and MT6365 Keys
- Consolidate "sram" property definitions
- Fix constraints on "nvmem" properties which only contain phandles and
no arg cells
- Another pass of fixing "phandle-array" constraints
- Add Gira vendor prefix
-----BEGIN PGP SIGNATURE-----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=0d13
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add support for handling multiple cells in "iommu-map" entries
- Support only 1 entry in /reserved-memory "reg" entries. Support for
more than 1 entry has been broken
- Fix a UAF on alloc_reserved_mem_array() failure
- Make "ibm,phandle" handling logic specific to PPC
- Use memcpy() instead of strcpy() for known length strings
- Ensure __of_find_n_match_cpu_property() handles malformed "reg"
entries
- Add various checks that expected strings are strings before
accessing them
- Drop redundant memset() when unflattening DT
DT bindings:
- Add a DTS style checker. Currently hooked up to dt_binding_check to
check examples
- Convert st,nomadik platform, ti,omap-dmm, and ti,irq-crossbar
bindings to DT schema
- Add Apple System Management Controller hwmon, Qualcomm Hamoa
Embedded Controller, Qualcomm IPQ6018 PWM controller, fsl,mc1323,
Samsung SOFEF01-M DDIC panel, Freescale i.MX53 Television Encoder,
Samsung S2M series PMIC extcon, and MT6365 PMIC AuxADC schemas
- Extend bindings for QCom Maili and Nord PDC, QCom Hali fastrpc,
qcom,eliza-imem, qcom,oryon-1-5 CPU, and MT6365 Keys
- Consolidate "sram" property definitions
- Fix constraints on "nvmem" properties which only contain phandles
and no arg cells
- Another pass of fixing "phandle-array" constraints
- Add Gira vendor prefix"
* tag 'devicetree-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (50 commits)
dt-bindings: interrupt-controller: qcom,pdc: Add Maili compatible string
dt-bindings: interrupt-controller: ti,irq-crossbar: Convert to DT schema
dt-bindings: vendor-prefixes: add Gira
dt-bindings: embedded-controller: Add Qualcomm reference device EC description
dt-bindings: pwm: add IPQ6018 binding
dt-bindings: hwmon: Add Apple System Management Controller hwmon schema
docs: dt: writing-schema: Clarify what is required in a schema
of: Respect #{iommu,msi}-cells in maps
of: Factor arguments passed to of_map_id() into a struct
of: Add convenience wrappers for of_map_id()
of: reserved_mem: zero total_reserved_mem_cnt if no valid /reserved-memory entry
of: reserved_mem: handle NULL name in of_reserved_mem_lookup()
dt-bindings: cache: l2c2x0: Add missing power-domains
dt-bindings: interrupt-controller: renesas,r9a09g077-icu: Fix reg size in example
dt-bindings: nvmem: consumer: Make 'nvmem' an array of one-item entries
drivers/of/overlay: Use memcpy() to copy known length strings
dt-bindings: add self-test fixtures for style checker
dt-bindings: wire style checker into dt_binding_check
scripts/jobserver-exec: propagate child exit status
dt-bindings: add DTS style checker
...
There are a few added drivers, but mostly the normal maintenance to drivers
for firmware, memory controller and other soc specific hadware:
- The NXP QuickEngine gets modern MSI support, which allows some cleanups to
the GICv3 irqchip chip driver
- A new SoC specific driver for the Renesas R-Car MFIS unit is added,
encapsulating support for the on-chip mailbox and hwspinlock
implementations that are not easily separated into individual
drivers
- The Qualcomm SoC drivers add support for additional SoC implementations,
and flexiblity around power managedment for the serial-engine driver
as well as probing the LLCC driver using custom hardware descriptions
inside of the device itself.
- Added support for the Samsung thermal management unit
- A cleanup to the Tegra 'PMC' driver interfaces to remove legacy
APIs and allow multiple PMC instances everywhere.
- Updates to the TI SCI and KNAS drivers to improve suspend/resume
support.
- Minor driver changes for mediatek, xilinx, allwinner, aspeed, tegra,
broadcom, amd, microchip and starfive specific drivers
- Memory controller updates for Tegra and Renesas for additional SoC
types and other improvements.
- Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces,
to update driver probing, object lifetimes and address minor bugs.
-----BEGIN PGP SIGNATURE-----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=27+M
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"There are a few added drivers, but mostly the normal maintenance to
drivers for firmware, memory controller and other soc specific
hardware:
- The NXP QuickEngine gets modern MSI support, which allows some
cleanups to the GICv3 irqchip chip driver
- A new SoC specific driver for the Renesas R-Car MFIS unit is added,
encapsulating support for the on-chip mailbox and hwspinlock
implementations that are not easily separated into individual
drivers
- The Qualcomm SoC drivers add support for additional SoC
implementations, and flexibility around power management for the
serial-engine driver as well as probing the LLCC driver using
custom hardware descriptions inside of the device itself.
- Added support for the Samsung thermal management unit
- A cleanup to the Tegra 'PMC' driver interfaces to remove legacy
APIs and allow multiple PMC instances everywhere.
- Updates to the TI SCI and KNAS drivers to improve suspend/resume
support.
- Minor driver changes for mediatek, xilinx, allwinner, aspeed,
tegra, broadcom, amd, microchip and starfive specific drivers
- Memory controller updates for Tegra and Renesas for additional SoC
types and other improvements.
- Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces, to
update driver probing, object lifetimes and address minor bugs"
* tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
Revert "firmware: zynqmp: Add dynamic CSU register discovery and sysfs interface"
Revert "Documentation: ABI: add sysfs interface for ZynqMP CSU registers"
memory: tegra234: drop dead NULL check in tegra234_mc_icc_aggregate()
memory: tegra264: drop redundant tegra264_mc_icc_aggregate()
memory: tegra186-emc: stop borrowing MC aggregate hook for EMC
soc: aspeed: cleanup dead default for ASPEED_SOCINFO
firmware: tegra: bpmp: Add support for multi-socket platforms
firmware: tegra: bpmp: Propagate debugfs errors
soc/tegra: pmc: Add Tegra238 support
soc/tegra: pmc: Restrict power-off handler to Nexus 7
soc/tegra: pmc: Populate powergate debugfs only when needed
soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard
soc/tegra: pmc: Remove unused legacy functions
soc/tegra: pmc: Create PMC context dynamically
firmware: samsung: acpm: remove compile-testing stubs
firmware: samsung: acpm: Add devm_acpm_get_by_phandle helper
firmware: samsung: acpm: Add TMU protocol support
firmware: samsung: acpm: Make acpm_ops const and access via pointer
firmware: samsung: acpm: Drop redundant _ops suffix in acpm_ops members
firmware: samsung: acpm: Annotate rx_data->cmd with __counted_by_ptr
...
There are fewer devicetree updates this time that the last few ones, with
five SoC types getting added:
- Qualcomm Dragonwing IPQ9650 is a new wireless networking SoC using
four Cortex-A55 and one Cortex-A78 core, which is a significant
upgrade from older generations
- ZTE zx297520v3 is an older low-end wireless SoC using a single
Cortex-A53 core, which so far can only run 32-bit kernels. This brings
back the ZX family of chips that was removed in 2021 after support
for the original zx296702 and zx296718 chips was never completed.
- Renesas R-Car M3Le (R8A779MD) is a variant of the R-Car M3-N (R8A77965)
automotive SoC.
- Apple t8122 (M3) is the 2023 generation of their laptop SoCs,
which has now been reverse-engineered to the point of having initial
kernel support for five laptop models.
- ASPEED AST27xx is their first baseboard managment controller using
a 64-bit core, the Cortex-A35, following earlier generations using
ARMv5/v6/v7 CPUs.
These all come with one or more initial boards, and in total there
are 39 new boards getting added across SoC families, including:
- Two NAS boxes using the old Cortina Systems Gemini SoC based on
an ARMv4 FA526 CPU core
- 18 industrial embedded boards using NXP i.MX6/8/9 and LX2160A
SoCs from Variscite, Toradex and SolidRun, plus a number of
overlays for combinations with additional boards
- One new carrier board and SoM using TI K3 AM62x, in addition to
new overlays for older SoMs
- Two new boards using Spacemit K3 (no relation with TI) RISC-V
SoCs.
- Three phones from Google, Nothing and Motorola, all using Qualcomm
Snapdragon SoCs
- AST26xx BMC support for two server boards
While there is still a significant number of patches improving hardware
support for the existing boards across vendors (NXP, Qualcomm, Renesas,
Rockchips, Mediatek, ...), a much smaller number of cleanups and warning
fixes have made it in this time.
-----BEGIN PGP SIGNATURE-----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=EhYX
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"There are fewer devicetree updates this time that the last few ones,
with five SoC types getting added:
- Qualcomm Dragonwing IPQ9650 is a new wireless networking SoC using
four Cortex-A55 and one Cortex-A78 core, which is a significant
upgrade from older generations
- ZTE zx297520v3 is an older low-end wireless SoC using a single
Cortex-A53 core, which so far can only run 32-bit kernels. This
brings back the ZX family of chips that was removed in 2021 after
support for the original zx296702 and zx296718 chips was never
completed.
- Renesas R-Car M3Le (R8A779MD) is a variant of the R-Car M3-N
(R8A77965) automotive SoC.
- Apple t8122 (M3) is the 2023 generation of their laptop SoCs, which
has now been reverse-engineered to the point of having initial
kernel support for five laptop models.
- ASPEED AST27xx is their first baseboard managment controller using
a 64-bit core, the Cortex-A35, following earlier generations using
ARMv5/v6/v7 CPUs.
These all come with one or more initial boards, and in total there are
39 new boards getting added across SoC families, including:
- Two NAS boxes using the old Cortina Systems Gemini SoC based on an
ARMv4 FA526 CPU core
- 18 industrial embedded boards using NXP i.MX6/8/9 and LX2160A SoCs
from Variscite, Toradex and SolidRun, plus a number of overlays for
combinations with additional boards
- One new carrier board and SoM using TI K3 AM62x, in addition to new
overlays for older SoMs
- Two new boards using Spacemit K3 (no relation with TI) RISC-V SoCs.
- Three phones from Google, Nothing and Motorola, all using Qualcomm
Snapdragon SoCs
- AST26xx BMC support for two server boards
While there is still a significant number of patches improving
hardware support for the existing boards across vendors (NXP,
Qualcomm, Renesas, Rockchips, Mediatek, ...), a much smaller number
of cleanups and warning fixes have made it in this time"
* tag 'soc-dt-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (665 commits)
arm64: dts: aspeed: Fix duplicate pinctrl labels and address scheme
arm64: dts: bst: enable eMMC controller in C1200
dt-bindings: display/lvds-codec: add ti,sn65lvds93
arm64: dts: allwinner: a523: Add missing GPIO interrupt
arm64: dts: lx2160a-rev2: avoid 32-bit pcie window system ram overlap
arm64: dts: aspeed: Add initial AST27xx SoC device tree
arm64: Kconfig: Add ASPEED SoC family Kconfig support
dt-bindings: arm: aspeed: Add AST2700 board compatible
arm64: dts: allwinner: a523: add gpadc node
arm64: dts: allwinner: Add EL2 virtual timer interrupt
ARM: dts: sun8i: a83t: Add MIPI CSI-2 controller node
dt-bindings: media: sun6i-a31-isp: Add optional interconnect properties
dt-bindings: media: sun6i-a31-csi: Add optional interconnect properties
arm64: dts: imx{91,93}-phyboard-segin: Add peb-av-18 overlays
arm64: dts: imx93-var-som-symphony: enable ADC
arm64: dts: imx93-var-som-symphony: enable TPM3 PWM
arm64: dts: imx93-var-som-symphony: keep RGB_SEL low
arm64: dts: imx93-var-som-symphony: enable UART7
arm64: dts: imx93-var-som-symphony: add TPM support
arm64: dts: imx91-var-som-symphony: fix RGB_SEL handling
...
Revert commit 51284d8b1dbc ("dt-bindings: mfd: syscon: Document the
LVDS_CMN syscon for the RZ/G3L") because it is completely not matching
reality and clearly incorrect in respect of renesas,r9a08g046-lvds-cmn.
It wasn't ever build-tested by author on their DTS, either.
The documented renesas,r9a08g046-lvds-cmn compatible clearly disallows
any children and simple-mfd fallback, however its only use in original
patchset is with simple-mfd and children, so this could have never
worked.
Fixes: 51284d8b1dbc ("dt-bindings: mfd: syscon: Document the LVDS_CMN syscon for the RZ/G3L")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20260608115507.134969-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
The st,stmpe-pwm binding is already covered by the MFD schema in
Documentation/devicetree/bindings/mfd/st,stmpe.yaml. However, the
PWM subnode was missing a 'required' properties block. This allowed
Device Tree nodes to pass validation even if the 'compatible'
string was omitted. This omission could lead to probe failures
at runtime.
Fix the schema by adding the missing 'required' block.
Signed-off-by: Manish Baing <manishbaing2789@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260523173251.72540-2-manishbaing2789@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The AST2700 SoC integrates two interconnected SoC instances, each
managed by its own System Control Unit (SCU).
Allow the AST2700 SoC1 pin controller to be described as a child
node of the SCU by extending the compatible strings accepted by
the SCU binding.
There is no functional change to the SCU binding beyond permitting
the aspeed,ast2700-soc1-pinctrl compatible string.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260521-pinctrl-single-bit-v5-1-308be2c160fc@aspeedtech.com
Signed-off-by: Lee Jones <lee@kernel.org>
The SC2730 PMIC provides a different set of regulators than SC2731 and
thus requires separate regulator bindings. Allow using them for the
"regulators" node.
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260519-sc2730-regulators-v3-2-5bf0e02507e3@abscue.de
Signed-off-by: Lee Jones <lee@kernel.org>
On the MT6397 family each buck regulator has a separate supply. LDOs are
split into various groups with independent supplies. There is also a
supply for the regulator control logic.
Add descriptions for all of the supplies for the MT6359.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260514091520.2718987-2-wenst@chromium.org
Signed-off-by: Lee Jones <lee@kernel.org>
MT6365 PMIC is compatible with MT6359, so add the compatible strings
for the main and sub devices (regulator, rtc, audio codec).
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260429-mediatek-genio-mt6365-cleanup-v1-2-6f43838be92f@collabora.com
Signed-off-by: Lee Jones <lee@kernel.org>
The rtc block of MT6359 PMIC is compatible with the one found in MT6358
but this compatibility was never expressed in the dt-bindings, so add
the missing compatible string for the rtc subnode.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260429-mediatek-genio-mt6365-cleanup-v1-1-6f43838be92f@collabora.com
Signed-off-by: Lee Jones <lee@kernel.org>
AST2700 consists of two interconnected SoC instances, each with its own
System Control Unit (SCU). The SCU0 provides pin control, interrupt
controllers, clocks, resets, and address-space mappings for the
Secondary and Tertiary Service Processors (SSP and TSP).
Describe the SSP/TSP address mappings using the standard
memory-region and memory-region-names properties.
Disallow legacy child nodes that are not present on AST2700, including
p2a-control and smp-memram. The latter is unnecessary as software can
access the scratch registers via the SCU syscon.
Also allow the AST2700 SoC0 pin controller to be described as a child
node of the SCU0, and add an example illustrating the SCU0 layout,
including reserved-memory, interrupt controllers, and pinctrl.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260428-upstream_pinctrl-v8-2-eb8ef9ab0498@aspeedtech.com
Signed-off-by: Lee Jones <lee@kernel.org>
Document Top Control and Status Register (TCSR) controller on Qualcomm
Nord SoC.
Signed-off-by: Deepti Jaggi <deepti.jaggi@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260504081122.825635-1-shengchao.guo@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
Convert the Hisilicon Hi655x PMIC binding from the text format to DT schema
to enable dtbs_check validation.
The 'regulators' child node is added based on existing usage in
arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts, which defines child
regulator nodes not documented in the original .txt binding.
The uppercase LDO names are retained to match existing DTS usage.
Signed-off-by: Shaunak Datar <shaunakkdatar@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260423113237.260652-1-shaunakkdatar@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The Khadas VIM4 MCU register is slightly different
from previous boards' MCU.
This board also features a switchable power source for its fan.
Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260421-add-mcu-fan-khadas-vim4-v4-1-447114a28f2d@aliel.fr
Signed-off-by: Lee Jones <lee@kernel.org>
The RZ/G3{E,L} SoCs have an LVDS Common (LVDS_CMN) region which is common
to all LVDS channels. The RZ/G3L has single-link, but the RZ/G3E has both
single and dual-link.
Use the syscon interface to access these registers for scalability.
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260421172910.218497-2-biju.das.jz@bp.renesas.com
Signed-off-by: Lee Jones <lee@kernel.org>
TI BQ25792 is similar in operation to BQ25703A, but has a different
register layout and different current/voltage capabilities.
Expand the existing BQ25703A binding to include BQ25792, and move the
voltage and current limits into per-variant conditional statements.
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://patch.msgid.link/20260331-bq25792-v6-1-0278fba33eb9@flipper.net
Signed-off-by: Lee Jones <lee@kernel.org>
Certain Samsung S2M series PMICs have a flash LED controller with
two LED channels, and with torch and flash control modes. Document the
devicetree schema for the device.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260516-s2mu005-pmic-v7-1-73f9702fb461@disroot.org
Signed-off-by: Lee Jones <lee@kernel.org>
Document TI LM3559 and LM3560 Synchronous Boost Flash Driver used for
camera flash LEDs.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260506064847.37795-2-clamor95@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
30 duty cycle for IR transmitter is used in Xiaomi Redmi Note 8 (ginkgo).
Signed-off-by: Biswapriyo Nath <nathbappai@gmail.com>
Reviewed-by: Sean Young <sean@mess.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260325-ginkgo-add-usb-ir-vib-v1-4-446c6e865ad6@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Samsung's S2MU005 PMIC includes subdevices for a charger, an MUIC (Micro
USB Interface Controller), and flash and RGB LED controllers.
Add the compatible and documentation for the S2MU005 PMIC. Also, add an
example for nodes for supported sub-devices, i.e. MUIC, flash LEDs, and
RGB LEDs. Charger sub-device uses the node of the parent.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260516-s2mu005-pmic-v7-3-73f9702fb461@disroot.org
Signed-off-by: Lee Jones <lee@kernel.org>
Unsurprisingly, we've had a fairly busy development cycle with
various fixes and enhancements. While the majority of changes consist
of device-specific fixes, a significant number of cleanups, hardening,
and modernizations have been applied to the core frameworks as well.
Below are some highlights:
* ALSA Core:
- Hardening, race condition, and UAF/leak fixes in the ALSA timer and
sequencer cores
- Widespread adoption of flexible array members across core structures
- Integration of new simple refcount helper functions to simplify code
* ASoC Core:
- Introduction of a unified SoundWire enumeration helper to clean up
redundant device initialization across codecs
- Enhancements to SDCA support, including handling devices with
multiple functions of the same type and proper jack reporting masks
- Continued refactoring of ASoC component debugfs and DAPM structures
- Simplification and improvements to the format auto-selection
mechanism
- Added shared BCLK rate constraints for cross-DAI coordination
* ASoC Platforms & Codecs:
- Initial bring-up and power management support for AMD ACP 7.x
- Support for Everest Semi ES9356 (SDCA), Mediatek MT2701 (on-chip
HDMI) and MT8196 SoCs, Renesas RZ/G3E, SpacemiT K3, and TI
TAC5xx2/TAS67524
- Added a new generic driver for GPIO-driven amplifiers
- Continued mass conversion of locking code to guard() helpers across
numerous platform drivers (MediaTek, Rockchip, STM32, Samsung, etc.)
- Cleanup of legacy non-DT platform data and rollbacks for obsolete SH
Ecovec24/7724se boards
* HD- and USB-Audio:
- Device-specific hardware quirks and fixes for various Realtek
HD-Audio devices (Lenovo, HP, ASUS, Acer, Clevo)
- Refinements to Qualcomm USB-audio offloading support
- Front-panel controls and autogain status support for Scarlett Gen 4
- Quirks for XIBERIA (K03S), Sennheiser (MOMENTUM 3), Edifier (MF200),
Novation (Mininova), and Behringer (Flow 8) USB-audio devices
- Improved robustness by rolling back or propagating write errors to the
mixer control caches (Babyface Pro, US-16x08, Scarlett)
* Others:
- Support for the HT-Omega eClaro PCI sound card in the Oxygen driver
- Robustness improvements and fixes for Virtio-audio, Xen-front, and
legacy OSS dmasound drivers
-----BEGIN PGP SIGNATURE-----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=wMnQ
-----END PGP SIGNATURE-----
Merge tag 'sound-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Unsurprisingly, we've had a fairly busy development cycle with various
fixes and enhancements. While the majority of changes consist of
device-specific fixes, a significant number of cleanups, hardening,
and modernizations have been applied to the core frameworks as well.
Below are some highlights:
ALSA Core:
- Hardening, race condition, and UAF/leak fixes in the ALSA timer and
sequencer cores
- Widespread adoption of flexible array members across core
structures
- Integration of new simple refcount helper functions to simplify
code
ASoC Core:
- Introduction of a unified SoundWire enumeration helper to clean up
redundant device initialization across codecs
- Enhancements to SDCA support, including handling devices with
multiple functions of the same type and proper jack reporting masks
- Continued refactoring of ASoC component debugfs and DAPM structures
- Simplification and improvements to the format auto-selection
mechanism
- Added shared BCLK rate constraints for cross-DAI coordination
ASoC Platforms & Codecs:
- Initial bring-up and power management support for AMD ACP 7.x
- Support for Everest Semi ES9356 (SDCA), Mediatek MT2701 (on-chip
HDMI) and MT8196 SoCs, Renesas RZ/G3E, SpacemiT K3, and TI
TAC5xx2/TAS67524
- Added a new generic driver for GPIO-driven amplifiers
- Continued mass conversion of locking code to guard() helpers across
numerous platform drivers (MediaTek, Rockchip, STM32, Samsung, etc)
- Cleanup of legacy non-DT platform data and rollbacks for obsolete
SH Ecovec24/7724se boards
HD- and USB-Audio:
- Device-specific hardware quirks and fixes for various Realtek
HD-Audio devices (Lenovo, HP, ASUS, Acer, Clevo)
- Refinements to Qualcomm USB-audio offloading support
- Front-panel controls and autogain status support for Scarlett Gen 4
- Quirks for XIBERIA (K03S), Sennheiser (MOMENTUM 3), Edifier
(MF200), Novation (Mininova), and Behringer (Flow 8) USB-audio
devices
- Improved robustness by rolling back or propagating write errors to
the mixer control caches (Babyface Pro, US-16x08, Scarlett)
Others:
- Support for the HT-Omega eClaro PCI sound card in the Oxygen driver
- Robustness improvements and fixes for Virtio-audio, Xen-front, and
legacy OSS dmasound drivers"
* tag 'sound-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (483 commits)
ALSA: usb-audio: Add iface reset and delay quirk for XIBERIA K03S
ALSA: hda/realtek: Add quirk for Lenovo Xiaoxin 14 GT
ALSA: hda/realtek: Add CS35L41 I2C quirk for ASUS UM3405GA
ALSA: timer: Fix racy timeri->timer changes with rwlock
ALSA: core: Fix unintuitive behavior of snd_power_ref_and_wait()
ALSA: seq: avoid stale FIFO cells during resize
ALSA: seq: oss: Serialize readq reset state with q->lock
ASoC: dt-bindings: Fix RT5677 "realtek,gpio-config" type
ASoC: audio-graph-card2: recommend to use auto select DAI format
ASoC: update auto format selection method
ASoC: renesas: rcar: update auto select format
ASoC: codecs: pcm3168a: update auto select format
ASoC: codecs: ak4619: update auto select format
ASoC: codecs: peb2466: don't use array if single pattern
ASoC: codecs: idt821034: don't use array if single pattern
ASoC: codecs: framer-codec: don't use array if single pattern
ASoC: remove SND_SOC_POSSIBLE_xBx_xFx
ASoC: adau1372: Clear PLL_EN on failed PLL lock without reset GPIO
ALSA: seq: Don't re-bounce the error event
ASoC: bcm: cygnus: use scoped child node loop
...
Core & protocols
----------------
- Work on removing rtnl_lock protection throughout the stack continues.
In this chapter:
- don't use rtnl_lock for IPv6 multicast routing configuration
- don't take rtnl_lock in ethtool for modern drivers
- prepare Qdisc dump callbacks for rtnl_lock removal
- Support dumping just ifindex + name of all interfaces, under RCU.
It's a common operation for Netlink CLI tools (when translating
names to ifindexes) and previously required full rtnl_lock.
- Support dumping qdiscs and page pools for a specific netdev. Even tho
user space wants a dump of all netdevs, most of the time, the OOO
programming model results in repeating the dump for each netdev.
Which, in absence of a cache, leads to a O(n^2) behavior.
- Flush nexthops once on multi-nexthop removal (e.g. when device goes
down), another O(n^2) -> O(n) improvement.
- Rehash locally generated traffic to a different nexthop on retransmit
timeout.
- Honor oif when choosing nexthop for locally generated IPv6 traffic.
- Convert TCP Auth Option to crypto library, and drop non-RFC algos.
- Increase subflow limits in MPTCP to 64 and endpoint limit to 256.
- Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need
to selectively skip reporting of the standard TCP Timestamp option,
because they won't fit into the header space together (12 + 30 > 40).
- Support using bridge neighbor suppression, Duplicate Address
Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN
deployments, e.g. VXLAN fabrics (IPv4 and IPv6).
- Improve link state reporting for upper netdevs (e.g. macvlan) over
tunnel devices (again, mostly for EVPN deployments).
- Support binding GENEVE tunnels to a local address.
- Speed up UDP tunnel destruction (remove one synchronize_rcu()).
- Support exponential field encoding in multicast (IGMPv3 and MLDv2).
- Support attaching PSP crypto offload to containers (veth, netkit).
- Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows
migrating individual IPsec SAs independently of their policies.
The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA
migration, lacks SPI for unique SA identification, and cannot express
reqid changes or migrate Transport mode selectors. The new interface
identifies the SA via SPI and mark, supports reqid changes, address
family changes, encap removal, and uses an atomic create+install
flow under x->lock to prevent SN/IV reuse during AEAD SA migration.
- Implement GRO/GSO support for PPPoE.
- Convert sockopt callbacks in a number of protocols to iov_iter.
Cross-tree stuff
----------------
- Remove support for Crypto TFM cloning (unblocked after the TCP Auth
Option rework). This feature regressed performance for all crypto API
users, since it changed crypto transformation objects into reference-
-counted objects.
- Add FCrypt-PCBC implementation to rxrpc and remove it from the global
crypto API as obsolete and insecure.
Wireless
--------
- Major rework of station bandwidth handling, fixing issues with lower
capability than AP.
- Cleanups for EMLSR spec issues (drafts differed).
- More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast,
schedule improvements, multi-station etc.)
- Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work
(e.g. non-primary channel access, UHR DBE support).
- Fine Timing Measurement ranging (i.e. distance measurement) APIs.
Netfilter
---------
- Use per-rule hash initval in nf_conncount. This avoids unnecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
- Various safety improvements, both in packet parsing and object
lifetimes. Notably add refcounts to conntrack timeout policy.
Deletions
---------
- Remove TLS + sockmap integration. TLS wants to pin user pages
to avoid a copy, and sockmap wants to write to the input stream.
More work on this integration is clearly needed, and we can't find
any users (original author admitted that they never deployed it).
- Remove support for TLS offload with TCP Offload Engine (the far
more common opportunistic offload is retained). The locking looks
unfixable (driver sleeps under TCP spin locks) and people from
the vendor that added this are AWOL.
- Remove more ATM code, trying to leave behind only what PPPoATM needs,
AAL5 and br2684 with permanent circuits.
- Remove AppleTalk. Let it join hamradio in our out of tree protocol
graveyard, I mean, repository.
- Disable 32-bit x_tables compatibility (32bit binaries on 64bit kernel)
interface in user namespaces. To be deleted completely, soon.
- Remove 5/10 MHz support from cfg80211/mac80211.
Drivers
-------
- Software:
- Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit).
- bonding: add knob to strictly follow 802.3ad for link state.
- New drivers:
- Alibaba Elastic Ethernet Adaptor (cloud vNIC).
- NXP NETC switch within i.MX94.
- DPLL:
- Add operational state to pins (implement in zl3073x).
- Add generic DPLL type, for daisy-chaining DPLLs (implement in ice).
- Ethernet high-speed NICs:
- Huawei (hinic3):
- enhance tc flow offload support with queue selection, tunnels
- nVidia/Mellanox:
- avoid over-copying payload to the skb's linear part (up to 60%
win for LRO on slow CPUs like ARM64 V2)
- expose more per-queue stats over the standard API
- support additional, unprivileged PFs in the DPU configuration
- support Socket Direct (multi-PF) with switchdev offloads
- add a pool / frag allocator for DMA mapped buffers for control
objects, save memory on systems with 64kB page size
- take advantage of the ability to dynamically change RSS table
size, even when table is configured by the user
- increase the max RSS table size for even traffic distribution
- Ethernet NICs:
- Marvell/Aquantia:
- AQC113 PTP support
- Realtek USB (r8152):
- support 10Gbit Link Speeds and Energy-Efficient Ethernet (EEE)
- support firmware loaded (for RTL8157/RTL8159)
- support for the RTL8159
- Intel (ixgbe):
- support Energy-Efficient Ethernet (EEE) on E610 devices
- Ethernet switches:
- Airoha:
- support multiple netdevs on a single GDM block / port
- Marvell (mv88e6xxx):
- support SERDES of mv88e6321
- Microchip (ksz8/9):
- rework the driver callbacks to remove one indirection layer
- Motorcomm (yt921x):
- support port rate policing
- support TBF qdisc offload
- support ACL/flower offload
- nVidia/Mellanox:
- expose per-PG rx_discards
- Realtek:
- rtl8365mb: bridge offloading and VLAN support
- Ethernet PHYs:
- Airoha:
- support Airoha AN8801R Gigabit PHYs.
- Micrel:
- implement 3 low-loss cable tunables
- Realtek:
- support MDI swapping for RTL8226-CG
- support MDIO for RTL931x
- Qualcomm:
- at803x: Rx and Tx clock management for IPQ5018 PHY
- Motorcomm:
- support YT8522 100M RMII PHY
- set drive strength in YT8531s RGMII
- TI:
- dp83822: add optional external PHY clock
- Bluetooth:
- hci_sync: add support for HCI_LE_Set_Host_Feature [v2]
- SMP: use AES-CMAC library API
- Intel:
- support Product level reset
- support smart trigger dump
- Mediatek:
- add event filter to filter specific event
- Realtek:
- fix RTL8761B/BU broken LE extended scan
- WiFi:
- Broadcom (b43):
- new support for a 11n device
- MediaTek (mt76):
- support mt7927
- mt792x: broken usb transport detection
- mt7921: regulatory improvements
- Qualcomm (ath9k):
- GPIO interface improvements
- Qualcomm (ath12k):
- WDS support
- replace dynamic memory allocation in WMI Rx path
- thermal throttling/cooling device support
- 6 GHz incumbent interference detection
- channel 177 in 5 GHz
- Realtek (rt89):
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=oNfE
-----END PGP SIGNATURE-----
Merge tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Work on removing rtnl_lock protection throughout the stack
continues. In this chapter:
- don't use rtnl_lock for IPv6 multicast routing configuration
- don't take rtnl_lock in ethtool for modern drivers
- prepare Qdisc dump callbacks for rtnl_lock removal
- Support dumping just ifindex + name of all interfaces, under RCU.
It's a common operation for Netlink CLI tools (when translating
names to ifindexes) and previously required full rtnl_lock.
- Support dumping qdiscs and page pools for a specific netdev. Even
tho user space wants a dump of all netdevs, most of the time, the
OOO programming model results in repeating the dump for each
netdev. Which, in absence of a cache, leads to a O(n^2) behavior.
- Flush nexthops once on multi-nexthop removal (e.g. when device goes
down), another O(n^2) -> O(n) improvement.
- Rehash locally generated traffic to a different nexthop on
retransmit timeout.
- Honor oif when choosing nexthop for locally generated IPv6 traffic.
- Convert TCP Auth Option to crypto library, and drop non-RFC algos.
- Increase subflow limits in MPTCP to 64 and endpoint limit to 256.
- Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need
to selectively skip reporting of the standard TCP Timestamp option,
because they won't fit into the header space together (12 + 30 >
40).
- Support using bridge neighbor suppression, Duplicate Address
Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN
deployments, e.g. VXLAN fabrics (IPv4 and IPv6).
- Improve link state reporting for upper netdevs (e.g. macvlan) over
tunnel devices (again, mostly for EVPN deployments).
- Support binding GENEVE tunnels to a local address.
- Speed up UDP tunnel destruction (remove one synchronize_rcu()).
- Support exponential field encoding in multicast (IGMPv3 and MLDv2).
- Support attaching PSP crypto offload to containers (veth, netkit).
- Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows
migrating individual IPsec SAs independently of their policies.
The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA
migration, lacks SPI for unique SA identification, and cannot
express reqid changes or migrate Transport mode selectors.
The new interface identifies the SA via SPI and mark, supports
reqid changes, address family changes, encap removal, and uses an
atomic create+install flow under x->lock to prevent SN/IV reuse
during AEAD SA migration.
- Implement GRO/GSO support for PPPoE.
- Convert sockopt callbacks in a number of protocols to iov_iter.
Cross-tree stuff:
- Remove support for Crypto TFM cloning (unblocked after the TCP Auth
Option rework). This feature regressed performance for all crypto
API users, since it changed crypto transformation objects into
reference-counted objects.
- Add FCrypt-PCBC implementation to rxrpc and remove it from the
global crypto API as obsolete and insecure.
Wireless:
- Major rework of station bandwidth handling, fixing issues with
lower capability than AP.
- Cleanups for EMLSR spec issues (drafts differed).
- More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast,
schedule improvements, multi-station etc.)
- Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work
(e.g. non-primary channel access, UHR DBE support).
- Fine Timing Measurement ranging (i.e. distance measurement) APIs.
Netfilter:
- Use per-rule hash initval in nf_conncount. This avoids unnecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
- Various safety improvements, both in packet parsing and object
lifetimes. Notably add refcounts to conntrack timeout policy.
Deletions:
- Remove TLS + sockmap integration. TLS wants to pin user pages to
avoid a copy, and sockmap wants to write to the input stream. More
work on this integration is clearly needed, and we can't find any
users (original author admitted that they never deployed it).
- Remove support for TLS offload with TCP Offload Engine (the far
more common opportunistic offload is retained). The locking looks
unfixable (driver sleeps under TCP spin locks) and people from the
vendor that added this are AWOL.
- Remove more ATM code, trying to leave behind only what PPPoATM
needs, AAL5 and br2684 with permanent circuits.
- Remove AppleTalk. Let it join hamradio in our out of tree protocol
graveyard, I mean, repository.
- Disable 32-bit x_tables compatibility (32bit binaries on 64bit
kernel) interface in user namespaces. To be deleted completely,
soon.
- Remove 5/10 MHz support from cfg80211/mac80211.
Drivers:
- Software:
- Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit)
- bonding: add knob to strictly follow 802.3ad for link state
- New drivers:
- Alibaba Elastic Ethernet Adaptor (cloud vNIC).
- NXP NETC switch within i.MX94.
- DPLL:
- Add operational state to pins (implement in zl3073x).
- Add generic DPLL type, for daisy-chaining DPLLs (implement in ice).
- Ethernet high-speed NICs:
- Huawei (hinic3):
- enhance tc flow offload support with queue selection,
tunnels
- nVidia/Mellanox:
- avoid over-copying payload to the skb's linear part (up to
60% win for LRO on slow CPUs like ARM64 V2)
- expose more per-queue stats over the standard API
- support additional, unprivileged PFs in the DPU
configuration
- support Socket Direct (multi-PF) with switchdev offloads
- add a pool / frag allocator for DMA mapped buffers for
control objects, save memory on systems with 64kB page size
- take advantage of the ability to dynamically change RSS
table size, even when table is configured by the user
- increase the max RSS table size for even traffic
distribution
- Ethernet NICs:
- Marvell/Aquantia:
- AQC113 PTP support
- Realtek USB (r8152):
- support 10Gbit Link Speeds and Energy-Efficient Ethernet
(EEE)
- support firmware loaded (for RTL8157/RTL8159)
- support for the RTL8159
- Intel (ixgbe):
- support Energy-Efficient Ethernet (EEE) on E610 devices
- Ethernet switches:
- Airoha:
- support multiple netdevs on a single GDM block / port
- Marvell (mv88e6xxx):
- support SERDES of mv88e6321
- Microchip (ksz8/9):
- rework the driver callbacks to remove one indirection layer
- Motorcomm (yt921x):
- support port rate policing
- support TBF qdisc offload
- support ACL/flower offload
- nVidia/Mellanox:
- expose per-PG rx_discards
- Realtek:
- rtl8365mb: bridge offloading and VLAN support
- Ethernet PHYs:
- Airoha:
- support Airoha AN8801R Gigabit PHYs.
- Micrel:
- implement 3 low-loss cable tunables
- Realtek:
- support MDI swapping for RTL8226-CG
- support MDIO for RTL931x
- Qualcomm:
- at803x: Rx and Tx clock management for IPQ5018 PHY
- Motorcomm:
- support YT8522 100M RMII PHY
- set drive strength in YT8531s RGMII
- TI:
- dp83822: add optional external PHY clock
- Bluetooth:
- hci_sync: add support for HCI_LE_Set_Host_Feature [v2]
- SMP: use AES-CMAC library API
- Intel:
- support Product level reset
- support smart trigger dump
- Mediatek:
- add event filter to filter specific event
- Realtek:
- fix RTL8761B/BU broken LE extended scan
- WiFi:
- Broadcom (b43):
- new support for a 11n device
- MediaTek (mt76):
- support mt7927
- mt792x: broken usb transport detection
- mt7921: regulatory improvements
- Qualcomm (ath9k):
- GPIO interface improvements
- Qualcomm (ath12k):
- WDS support
- replace dynamic memory allocation in WMI Rx path
- thermal throttling/cooling device support
- 6 GHz incumbent interference detection
- channel 177 in 5 GHz
- Realtek (rt89):
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations"
* tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1778 commits)
ipv4: fib_rule: Move fib4_rules_exit() to ->exit().
net: serialize netif_running() check in enqueue_to_backlog()
net: skmsg: preserve sg.copy across SG transforms
appletalk: move the protocol out of tree
appletalk: stop storing per-interface state in struct net_device
selftests/bpf: test that TLS crypto is rejected on a sockmap socket
selftests/bpf: drop the unused kTLS program from test_sockmap
selftests/bpf: remove sockmap + ktls tests
tls: remove dead sockmap (psock) handling from the SW path
tls: reject the combination of TLS and sockmap
atm: remove orphaned uAPI for deleted drivers, protocols and SVCs
atm: remove unused ATM PHY operations
atm: remove the unused pre_send and send_bh device operations
atm: remove the unused change_qos device operation
atm: remove SVC socket support and the signaling daemon interface
atm: remove the local ATM (NSAP) address registry
atm: remove dead SONET PHY ioctls
atm: remove the unused send_oam / push_oam callbacks
atm: remove AAL3/4 transport support
net: dsa: sja1105: fix lastused timestamp in flower stats
...
Both CoreI2C and the hardened versions of it on mpfs and pic64gx have a
reset pin. For the former, usually this is wired to a common fabric
reset not managed by software and for the latter two the platform
firmware takes them out of reset on first-party boards (or those using
modified versions of the vendor firmware), but not all boards may take
this approach. Permit providing a reset in devicetree for Linux, or
other devicetree-consuming software, to use.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260506-bronchial-kitten-e3697fb66ba7@spud
Merge in late fixes in preparation for the net-next PR.
Conflicts:
net/tls/tls_sw.c
406e8a651a ("net: skmsg: preserve sg.copy across SG transforms")
79511603a6 ("tls: remove dead sockmap (psock) handling from the SW path")
drivers/net/ethernet/microsoft/mana/mana_en.c
f8fd56977e ("net: mana: guard TX wq object destroy with INVALID_MANA_HANDLE check")
d07efe5a6e ("net: mana: Use per-queue allocation for tx_qp to reduce allocation size")
https://lore.kernel.org/ajAPXu-C_PuTgV-a@sirena.org.uk
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The YAML conversion added me as maintainer but I can't recall being
asked nor do I want to maintain it. Thierry has created the YAML file
and works for the company which contributed the driver.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Thierry Reding <thierry.reding@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260616060910.1480-2-wsa+renesas@sang-engineering.com
Convert Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt to
the YAML schema so the i2c-mux-reg binding is validated by
dt_binding_check. Faithful port of the existing properties; no
semantic change.
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260608-i2c-mux-reg-base-bus-num-v2-1-776e313f213a@nexthop.ai
API:
- Drop support for off-CPU cryptography in af_alg.
- Document that af_alg is *always* slower.
- Document the deprecation of af_alg.
- Remove zero-copy support from skcipher and aead in af_alg.
- Cap AEAD AD length to 0x80000000 in af_alg.
- Free default RNG on module exit.
Algorithms:
- Fix vli multiplication carry overflow in ecc.
- Drop unused cipher_null crypto_alg.
- Remove unused variants of drbg.
- Use lib/crypto in drbg.
- Use memcpy_from/to_sglist in authencesn.
- Allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode.
- Disallow RSA PKCS#1 SHA-1 sig algs in FIPS mode.
- Filter out async aead implementations at alloc in krb5.
- Fix non-parallel fallback by rstoring callback in pcrypt.
- Validate poly1305 template argument in chacha20poly1305.
Drivers:
- Add sysfs PCI reset support to qat.
- Add KPT support for GEN6 devices to qat.
- Remove unused character device and ioctls from qat.
- Add support for hw access via SMCC to mtk.
- Remove prng support from crypto4xx.
- Remove prng support from hisi-trng.
- Remove prng support from sun4i-ss.
- Remove prng support from xilinx-trng.
- Remove loongson-rng.
- Remove exynos-rng.
Others:
- Remove support for AIO on sockets.
-----BEGIN PGP SIGNATURE-----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=4BGT
-----END PGP SIGNATURE-----
Merge tag 'v7.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Drop support for off-CPU cryptography in af_alg
- Document that af_alg is *always* slower
- Document the deprecation of af_alg
- Remove zero-copy support from skcipher and aead in af_alg
- Cap AEAD AD length to 0x80000000 in af_alg
- Free default RNG on module exit
Algorithms:
- Fix vli multiplication carry overflow in ecc
- Drop unused cipher_null crypto_alg
- Remove unused variants of drbg
- Use lib/crypto in drbg
- Use memcpy_from/to_sglist in authencesn
- Allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode
- Disallow RSA PKCS#1 SHA-1 sig algs in FIPS mode
- Filter out async aead implementations at alloc in krb5
- Fix non-parallel fallback by rstoring callback in pcrypt
- Validate poly1305 template argument in chacha20poly1305
Drivers:
- Add sysfs PCI reset support to qat
- Add KPT support for GEN6 devices to qat
- Remove unused character device and ioctls from qat
- Add support for hw access via SMCC to mtk
- Remove prng support from crypto4xx
- Remove prng support from hisi-trng
- Remove prng support from sun4i-ss
- Remove prng support from xilinx-trng
- Remove loongson-rng
- Remove exynos-rng
Others:
- Remove support for AIO on sockets"
* tag 'v7.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (196 commits)
crypto: tegra - fix refcount leak in tegra_se_host1x_submit()
crypto: rng - Free default RNG on module exit
crypto: testmgr - allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode
hwrng: jh7110 - fix refcount leak in starfive_trng_read()
crypto: atmel-ecc - drop dead code in atmel_ecdh_max_size
crypto: cavium/cpt - fix DMA cleanup using wrong loop index
crypto: marvell/octeontx - fix DMA cleanup using wrong loop index
MAINTAINERS: make myself the maintainer of the Qualcomm QCE driver
crypto: amcc - convert irq_of_parse_and_map to platform_get_irq
crypto: sun4i-ss - Remove insecure and unused rng_alg
hwrng: xilinx - Move xilinx-rng into drivers/char/hw_random/
crypto: xilinx-trng - Replace crypto_drbg_ctr_df() with HMAC-SHA512
crypto: xilinx-trng - Fix return value of xtrng_hwrng_trng_read()
crypto: xilinx-trng - Remove crypto_rng interface
crypto: exynos-rng - Remove exynos-rng driver
hwrng: hisi-trng - Move hisi-trng into drivers/char/hw_random/
crypto: hisi-trng - Remove crypto_rng interface
crypto: loongson - Remove broken and unused loongson-rng
crypto: crypto4xx - Remove insecure and unused rng_alg
crypto: qat - validate RSA CRT component lengths
...
- Validate host's max_segs to fail gracefully
MMC host:
- davinci: Avoid potential NULL dereference in the IRQ handler
- davinci: Call mmc_add_host() in the correct order during probe
- dw_mmc-exynos: Increase DMA threshold for exynos7870
- renesas_sdhi: Add support for RZ/G2E, RZ/G2N and R-Car M3Le variants
- sdhci-msm: Add support for Hawi, Eliza and Shikra variants
- sdhci-of-k1: Add support for SD UHS-I modes
- sdhci-of-k1: Add support for tuning for eMMC HS200 and SD UHS-I
-----BEGIN PGP SIGNATURE-----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=ry/K
-----END PGP SIGNATURE-----
Merge tag 'mmc-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Validate host's max_segs to fail gracefully
MMC host:
- davinci:
- Avoid potential NULL dereference in the IRQ handler
- Call mmc_add_host() in the correct order during probe
- dw_mmc-exynos:
- Increase DMA threshold for exynos7870
- renesas_sdhi:
- Add support for RZ/G2E, RZ/G2N and R-Car M3Le variants
- sdhci-msm:
- Add support for Hawi, Eliza and Shikra variants
- sdhci-of-k1:
- Add support for SD UHS-I modes
- Add support for tuning for eMMC HS200 and SD UHS-I"
* tag 'mmc-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (24 commits)
mmc: dw_mmc: Add desc_num field for clarity
dt-bindings: mmc: sdhci-msm: Rename the binding to include 'qcom' prefix
mmc: sdhci-of-dwcmshc: use dev_err_probe() to simplify error paths
mmc: sdhci-of-dwcmshc: remove redundant IS_ERR() check
dt-bindings: mmc: sdhci-msm: qcom: Add Hawi compatible
mmc: renesas_sdhi: Add OF entry for RZ/G2E SoC
mmc: renesas_sdhi: Add OF entry for RZ/G2N SoC
dt-bindings: mmc: sdhci-msm: Add Eliza compatible
mmc: davinci: fix mmc_add_host order in probe
dt-bindings: mmc: sdhci-msm: Document the Shikra compatible
mmc: sdhci-of-k1: add comprehensive SDR tuning support
mmc: sdhci-of-k1: add regulator and pinctrl voltage switching support
mmc: sdhci-of-k1: enable essential clock infrastructure for SD operation
dt-bindings: mmc: spacemit,sdhci: add pinctrl support for voltage switching
mmc: via-sdmmc: Simplify initialisation of pci_device_id array
mmc: davinci: avoid NULL deref of host->data in IRQ handler
memstick: Constify the driver id_table
mmc: host: Move MODULE_DEVICE_TABLE next to the table itself
mmc: renesas_sdhi: add R-Car M3Le compatibility string
dt-bindings: mmc: renesas,sdhi: Document R-Car M3Le support
...
* New drivers for the following chips
- Analog Devices LTC4283 Swap Controller
- Analog Devices MAX20830
- Analog Devices MAX20860A
- ARCTIC Fan Controller
- Delta E50SN12051
- Luxshare LX1308
- Microchip EMC1812/13/14/15/33
- Monolithic MP2985
- Murata D1U74T PSU
* New chip support added to existing drivers
- asus-ec-sensors: Support for ROG MAXIMUS Z790 EXTREME, ROG STRIX B850-E
GAMING WIFI, and ROG STRIX B650E-E GAMING WIFI
- dell-smm: Add Dell Latitude 7530 to fan control whitelist
- nct6683: Support for ASRock Z890 Pro-A
- pmbus: Support for Flex BMR316, BMR321, BMR350 and BMR351
- pmbus/max34440: Support for ADPM12250
- pmbus/xdp720: Support for Infineon xdp730, and fix driver issues
reported by Sashiko
* New functionality
- Add support for update_interval_us chip attribute, and support it
in ina238 driver
- Add support for guard() and scoped_guard() for subsystem locks,
and use it in adt7411, ina2xx, and lm90 drivers
- emc2305: Support configurable fan PWM at shutdown
- lm63: Expose PWM frequency and LUT hysteresis as writable
- lm75: Support active-high alert polarity
- nct7802: Add time step attributes for tweaking responsiveness
- pmbus/adm1266: Add rtc debugfs entries for rtc, powerup_counter,
clear_blackbox, and firmware_revision
- raspberrypi: Fix delayed-work teardown race, add voltage input support
as well as voltage domain IDs
mcp9982: Add support for reporting external diode faults
* Miscellaneous bug fixes, changes and improvements
- Use named initializers for platform_device_id arrays and
i2c_device_data, and remove unused driver data
- Various drivers: Move MODULE_DEVICE_TABLE next to the table itself
- ads7871: Convert to hwmon_device_register_with_info(), and use
DMA-safe buffer for SPI writes
- adt7411: document supported sysfs attributes
- adt7462: Add of_match_table to support devicetree
- adt7475: Add explicit header include
- coretemp; Fix outdated documentation, coding style issues, and
replace hardcoded core count with dynamic value
- cros_ec: Drop unused assignment of platform_device_id driver data
- emc2305: Fix fan channel index handling
- gpd-fan: Reject EC PWM value 0 as invalid, fix race condition between
device removal and sysfs access, upgrade log level from warn to err for
platform device creation failure, initialize EC before registering hwmon
device, drop global driver data and use per-device allocation
- htu31: document debugfs serial_number
- ina238: Add support for samples and update_interval
- it87: Clamp negative values to zero in set_fan()
- lm75: Add explicit header include, Add explicit default cases in
lm75_is_visible(), and add section for sysfs interface to documentation
- pmbus/lm25066: Fix PMBus coefficients for LM5064/5066/5066i
- tmp102: Use device_property_read_string API
- tmp401: Read "ti,n-factor" as signed
- Convert zyxel,nsa320-mcu to DT schema
-----BEGIN PGP SIGNATURE-----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=mDMd
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers for the following chips:
- Analog Devices LTC4283 Swap Controller
- Analog Devices MAX20830
- Analog Devices MAX20860A
- ARCTIC Fan Controller
- Delta E50SN12051
- Luxshare LX1308
- Microchip EMC1812/13/14/15/33
- Monolithic MP2985
- Murata D1U74T PSU
New chip support added to existing drivers:
- asus-ec-sensors: Support for ROG MAXIMUS Z790 EXTREME, ROG STRIX
B850-E GAMING WIFI, and ROG STRIX B650E-E GAMING WIFI
- dell-smm: Add Dell Latitude 7530 to fan control whitelist
- nct6683: Support for ASRock Z890 Pro-A
- pmbus: Support for Flex BMR316, BMR321, BMR350 and BMR351
- pmbus/max34440: Support for ADPM12250
- pmbus/xdp720: Support for Infineon xdp730, and fix driver issues
reported by Sashiko
New functionality:
- Add support for update_interval_us chip attribute, and support it
in ina238 driver
- Add support for guard() and scoped_guard() for subsystem locks, and
use it in adt7411, ina2xx, and lm90 drivers
- emc2305: Support configurable fan PWM at shutdown
- lm63: Expose PWM frequency and LUT hysteresis as writable
- lm75: Support active-high alert polarity
- nct7802: Add time step attributes for tweaking responsiveness
- pmbus/adm1266: Add rtc debugfs entries for rtc, powerup_counter,
clear_blackbox, and firmware_revision
- raspberrypi: Fix delayed-work teardown race, add voltage input
support as well as voltage domain IDs
- mcp9982: Add support for reporting external diode faults
Miscellaneous bug fixes, changes and improvements:
- Use named initializers for platform_device_id arrays and
i2c_device_data, and remove unused driver data
- Various drivers: Move MODULE_DEVICE_TABLE next to the table itself
- ads7871: Convert to hwmon_device_register_with_info(), and use
DMA-safe buffer for SPI writes
- adt7411: document supported sysfs attributes
- adt7462: Add of_match_table to support devicetree
- adt7475: Add explicit header include
- coretemp; Fix outdated documentation, coding style issues, and
replace hardcoded core count with dynamic value
- cros_ec: Drop unused assignment of platform_device_id driver data
- emc2305: Fix fan channel index handling
- gpd-fan: Reject EC PWM value 0 as invalid, fix race condition
between device removal and sysfs access, upgrade log level from
warn to err for platform device creation failure, initialize EC
before registering hwmon device, drop global driver data and use
per-device allocation
- htu31: document debugfs serial_number
- ina238: Add support for samples and update_interval
- it87: Clamp negative values to zero in set_fan()
- lm75: Add explicit header include, Add explicit default cases in
lm75_is_visible(), and add section for sysfs interface to
documentation
- pmbus/lm25066: Fix PMBus coefficients for LM5064/5066/5066i
- tmp102: Use device_property_read_string API
- tmp401: Read "ti,n-factor" as signed
- Convert zyxel,nsa320-mcu to DT schema"
* tag 'hwmon-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (81 commits)
hwmon: tmp401: Read "ti,n-factor" as signed
hwmon: (pmbus/lm25066) Fix PMBus coefficients for LM5064/5066/5066i
hwmon: (gpd-fan) Reject EC PWM value 0 as invalid
hwmon: (dell-smm) Add Dell Latitude 7530 to fan control whitelist
hwmon: temperature: add support for EMC1812
dt-bindings: hwmon: temperature: add support for EMC1812
hwmon: (gpd-fan): fix race condition between device removal and sysfs access
hwmon: (gpd-fan): upgrade log level from warn to err for platform device creation failure
hwmon: (gpd-fan): Initialize EC before registering hwmon device
hwmon: (gpd-fan): drop global driver data and use per-device allocation
hwmon: (pmbus/max34440): add support adpm12250
hwmon: (ina238) Add update_interval_us attribute
hwmon: Add update_interval_us chip attribute
hwmon: (ina238) Add support for samples and update_interval
gpio: gpio-ltc4283: Add support for the LTC4283 Swap Controller
hwmon: ltc4283: Add support for the LTC4283 Swap Controller
dt-bindings: hwmon: Document the LTC4283 Swap Controller
hwmon: (pmbus/xdp720) Fix driver issues xdp720/730
hwmon: (pmbus/xdp720) Add support for efuse xdp730
dt-bindings: hwmon/pmbus: Add Infineon xdp730
...
* subsystem
- Unregister PM notifier on watchdog unregister
- Various documentation fixes and improvements
* Removed drivers
- Remove AMD Elan SC520 processor watchdog driver
- Drop SMARC-sAM67 support
- Remove driver for integrated WDT of ZFx86 486-based SoC
* New drivers
- Driver for Andes ATCWDT200
- Driver for Gunyah Watchdog
* Added support to existing drivers
- Add "apple,t8103-wdt" and "apple,t8122-wdt" compatibles to Apple
watchdog driver
- Add rockchip,rk3528-wdt and rockchip,rv1103b-wdt to snps,dw-wdt.yaml
- Document IPQ9650, IPQ5210, Shikra, Nord, and Hawi in qcom-wdt.yaml
Also document sram property and add support to get the bootstatus
to qcom wdt driver
- lenovo_se10_wdt: Fix use-after-rfree and add support for SE10 Gen 2
platform
- ti,rti-wdt: Add ti,am62l-rti-wdt compatible
- renesas: Document RZ/G3L support and rework example for
renesas,r9a09g057-wdt
* Other bug fixes and improvements
- Use named initializers (sc1200, ziirave_wdt)
- Allow pic32-dmt and pic32-wdt to be built with COMPILE_TEST
- realtek-otto: enable clock before using I/O, and prevent PHASE2 underflows
- rti_wdt: Add reaction control
- renesas,rzn1-wdt: Drop interrupt support and other cleanup
- gpio_wdt: Add ACPI support
- imx7ulp_wdt: Keep WDOG running until A55 enters WFI on i.MX94
- sprd_wdt: Remove redundant sprd_wdt_disable() on register failure
- bcm2835_wdt: Switch to new sys-off handler API
- sama5d4_wdt: Fix WDDIS detection on SAM9X60 and SAMA7G5
- hpwdt: Refine hpwdt message for UV platform
- Convert TS-4800 bindings to DT schema
- menz069_wdt: drop unneeded MODULE_ALIAS
- sp5100_tco: Use EFCH MMIO for newer Hygon FCH
-----BEGIN PGP SIGNATURE-----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=macd
-----END PGP SIGNATURE-----
Merge tag 'watchdog-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull watchdog updates and fixes from Guenter Roeck:
"Subsystem:
- Unregister PM notifier on watchdog unregister
- Various documentation fixes and improvements
Removed drivers:
- Remove AMD Elan SC520 processor watchdog driver
- Drop SMARC-sAM67 support
- Remove driver for integrated WDT of ZFx86 486-based SoC
New drivers:
- Driver for Andes ATCWDT200
- Driver for Gunyah Watchdog
Added support to existing drivers:
- Add "apple,t8103-wdt" and "apple,t8122-wdt" compatibles to Apple
watchdog driver
- Add rockchip,rk3528-wdt and rockchip,rv1103b-wdt to snps,dw-wdt.yaml
- Document IPQ9650, IPQ5210, Shikra, Nord, and Hawi in qcom-wdt.yaml
Also document sram property and add support to get the bootstatus
to qcom wdt driver
- lenovo_se10_wdt: Fix use-after-rfree and add support for SE10 Gen 2
platform
- ti,rti-wdt: Add ti,am62l-rti-wdt compatible
- renesas: Document RZ/G3L support and rework example for
renesas,r9a09g057-wdt
Other bug fixes and improvements:
- Use named initializers (sc1200, ziirave_wdt)
- Allow pic32-dmt and pic32-wdt to be built with COMPILE_TEST
- realtek-otto: enable clock before using I/O, and prevent PHASE2 underflows
- rti_wdt: Add reaction control
- renesas,rzn1-wdt: Drop interrupt support and other cleanup
- gpio_wdt: Add ACPI support
- imx7ulp_wdt: Keep WDOG running until A55 enters WFI on i.MX94
- sprd_wdt: Remove redundant sprd_wdt_disable() on register failure
- bcm2835_wdt: Switch to new sys-off handler API
- sama5d4_wdt: Fix WDDIS detection on SAM9X60 and SAMA7G5
- hpwdt: Refine hpwdt message for UV platform
- Convert TS-4800 bindings to DT schema
- menz069_wdt: drop unneeded MODULE_ALIAS
- sp5100_tco: Use EFCH MMIO for newer Hygon FCH"
* tag 'watchdog-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (58 commits)
watchdog: sc1200: Drop unused assignment of pnp_device_id driver data
watchdog: unregister PM notifier on watchdog unregister
dt-bindings: watchdog: qcom-wdt: Document IPQ5210 watchdog
watchdog: dev: convert to kernel-doc comments
watchdog: core: clean up some comments
watchdog: uapi: add comments for what bit masks apply to
watchdog: linux/watchdog.h: repair kernel-doc comments
watchdog: add devm_watchdog_register_device() to watchdog-kernel-api
watchdog: ziirave_wdt: Use named initializers for struct i2c_device_id
watchdog: realtek-otto: enable clock before using I/O
watchdog: realtek-otto: prevent PHASE2 underflows
dt-bindings: watchdog: qcom-wdt: Document IPQ9650 watchdog
dt-bindings: watchdog: renesas,rzn1-wdt: interrupts are not required
dt-bindings: watchdog: apple,wdt: Add t8122 compatible
watchdog: apple: Add "apple,t8103-wdt" compatible
watchdog: rzn1: remove now obsolete interrupt support
dt-bindings: watchdog: Add watchdog compatible for RK3528
watchdog: convert the Kconfig dependency on OF_GPIO to OF
watchdog: Remove AMD Elan SC520 processor watchdog driver
watchdog: lenovo_se10_wdt: Fix use-after-free and resource leak risk
...
This has been quite a busy release, mainly due to the subsystem wide
work Johan Hovold has done to modernise resource allocation for the
subsystem on probe, the subsystem did some very clever allocation
management pre devm which didn't quite mesh comfortably with managed
allocations and made it far too easy to introduce error handling and
removal bugs.
- Cleanup and simplification of controller struct allocation, moving
everything over to devm and making the devm APIs more robust, from
Johan Hovold
- Support for spi-mem devices that don't assert chip select and support
for a secondary read command for memory mapped flashes, some commits
for this are shared with mtd.
- Support for SpacemiT K1.
There will be a simple add/add conflict with the i2c-host tree in the
x86 quirk data in drivers/acpi/acpi_apd.c.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmowLx0ACgkQJNaLcl1U
h9BiuAf/bSzTrdeSLpQyQh/UxCKnl4joFtpyb9SValB/32oSTx9YecNYLDxA2z1L
3dkEPBRGBcGjGCINDQldJM/WMMRT0JKG58aWluF3YNPshKN7qK18iNQxbeN9Dh8F
qykmyWZ7wnLks03UCVm7be9kl2UHs4JJ+oRoHq0+6ktS7o+BrIzgJweprmTBmyB4
rRigCbPSL2BNBZnNvWqrZSYeqWHnonGYabhogaSJnhmeJTkSfKE6mugE8qmGzi+O
ZGeWsTdq270WU1omDZRy/PQQ3YLoLU2lUCGuHWTrT/98sGIJjkYV7UfE58GJwzpi
d1N+y8unL0R5HgSkMM4B+f/4OL3VoA==
=1zbv
-----END PGP SIGNATURE-----
Merge tag 'spi-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This has been quite a busy release, mainly due to the subsystem wide
work Johan Hovold has done to modernise resource allocation for the
subsystem on probe, the subsystem did some very clever allocation
management pre devm which didn't quite mesh comfortably with managed
allocations and made it far too easy to introduce error handling and
removal bugs.
- Cleanup and simplification of controller struct allocation, moving
everything over to devm and making the devm APIs more robust, from
Johan Hovold
- Support for spi-mem devices that don't assert chip select and
support for a secondary read command for memory mapped flashes,
some commits for this are shared with mtd.
- Support for SpacemiT K1"
* tag 'spi-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (118 commits)
spi: Fix mismatched DT property access types
spi: xilinx: use FIFO occupancy register to determine buffer size
spi: spi-mem: Fix spi_controller_mem_ops kdoc
spi: xilinx: let transfers timeout in case of no IRQ
spi: dt-bindings: nuvoton,npcm750-fiu: Convert to DT schema
spi: meson-spifc: fix runtime PM leak on remove
spi: Use named initializers for platform_device_id arrays
spi: rzv2h-rspi: Add suspend/resume support
spi: dw-pci: remove redundant pci_free_irq_vectors() calls
spi: ep93xx: fix double-free of zeropage on DMA setup failure
spi: cadence-xspi: Revert COMPILE_TEST support
spi: cadence-xspi: Support 32bit and 64bit slave dma interface
spi: tegra210-quad: Allocate DMA memory for DMA engine
spi: imx: replace dmaengine_terminate_all() with dmaengine_terminate_sync()
spi: fsl-lpspi: terminate the RX channel on TX prepare failure path
spi: fsl-lpspi: replace dmaengine_terminate_all() with dmaengine_terminate_sync()
spi: atmel: fix DMA channel and bounce buffer leaks
spi: omap2-mcspi: Use of_device_get_match_data()
spi: Use named initializers for arrays of i2c_device_data
spi: aspeed: Replace VLA parameter with flat pointer in calibration helper
...
The development of the regulator subsystem continues to be quite quiet,
we've got several new devices, removal of one old device and some kernel
wide cleanup of platform devices but nothing in the core.
- Cleanups of platform_device_id usage.
- Filling out and fixing of the description of the MediaTek MT6359
- Removal of the PCAP regulator driver, the MFD has been removed.
- New device support for Qualcomm Nord RPMH, PM8109, PM8150 and
PMAU0102, and SG Micro SGM3804.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmowBwMACgkQJNaLcl1U
h9C39Qf/bQbsFwOOajnciGePTbn+0NiepkVr8H6+lYYt50oHI9olsvhiIE957x1h
OR8pYIFcH+ct7fZMJxr0BpET9GmEbx4J0jdZ3dHP4sZUX4td/Ur9XoCsz23nFckD
lx1VcYo1C3er+/pP5JMueELRB0S5QiJ1RtE2xP7/c3Vv2mqfZJ4bbacohjPYFfsc
T/z+Is1sB1Bjk+CEs590CkduKw5ElXy+iwt7e7oZYsWZy66CCvmCPlk27Z9mAEYM
4zLtnNfJyzdeapdadN49Y995mmqp/8Wk9mCYyjcakgAMXDVoYNf8fZLasixy7+zo
4xbpSs8tFhsoB+4XU1bIlgXkzpRAFA==
=NKM3
-----END PGP SIGNATURE-----
Merge tag 'regulator-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"The development of the regulator subsystem continues to be quite
quiet, we've got several new devices, removal of one old device and
some kernel wide cleanup of platform devices but nothing in the core.
- Cleanups of platform_device_id usage
- Filling out and fixing of the description of the MediaTek MT6359
- Removal of the PCAP regulator driver, the MFD has been removed
- New device support for Qualcomm Nord RPMH, PM8109, PM8150 and
PMAU0102, and SG Micro SGM3804"
* tag 'regulator-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (23 commits)
regulator: dt-bindings: mt6311: Convert to DT schema
regulator: qcom_smd-regulator: Add PM8019
regulator: dt-bindings: qcom,smd-rpm-regulator: Add PM8019
regulator: mt6359: Fix vbbck default internal supply name
regulator: bq257xx: drop confusing configuration of_node
regulator: Unify usage of space and comma in platform_device_id arrays
regulator: Use named initializers for platform_device_id arrays
regulator: Drop unused assignment of platform_device_id driver data
regulator: scmi: fix of_node refcount leak in scmi_regulator_probe()
regulator: remove used pcap regulator driver
regulator: add SGM3804 Dual Output driver
regulator: dt-bindings: document the SGM3804 Dual Output regulator
regulator: mt6359: Add proper ldo_vcn33_[12] regulators
regulator: mt6359: Add regulator supply names
regulator: mt6359: const-ify regulator descriptions
regulator: dt-bindings: mt6359: Deprecate bogus vcn33_[12]_* split regulators
regulator: dt-bindings: mt6359: Drop regulator-name pattern restrictions
regulator: palmas: Move MODULE_DEVICE_TABLE next to the table itself
regulator: qcom_smd: Add PM8150 regulators
regulator: dt-bindings: qcom,smd-rpm-regulator: Document PM8150 IC
...
Two major cleanup across drivers and core code:
- use named initializers in device ID tables
- replace dev_err() with dev_err_probe()
Drivers:
- at24: use named initializers for arrays of i2c_device_data
- at91: add MCHP_LAN966X_PCI dependency
- cadence: add shutdown callback
- k1: enable by default on SpacemiT
- mxs: improve documentation
- qcom-geni: use pm_runtime_force_suspend/resume for system sleep
- tegra:
- disable fair arbitration on non-MCTP buses
- allocate DMA buffers from the correct DMA device
- designware:
- handle active target shutdown cleanly
- add shutdown callbacks for platform and PCI drivers
- adopt the new PM_RUNTIME_ACQUIRE() helpers
DT bindings:
- convert davinci bindings to DT schema
Core and muxes:
- acpi: report missing I2C resources as -ENOENT
- gpiolib: add gpiod_is_single_ended() helper for I2C GPIO users
- i2c-mux-reg: add generic firmware node support
- a set of 10 patches from Johan Hovold fixing adapter
registration races, cleanup paths and resource management
issues
New support:
- DesignWare LECA0003 (ACPI ID)
- Loongson LS2K0300 I2C controller (new driver)
- Qualcomm CCI Glymur and Shikra compatibles
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQScDfrjQa34uOld1VLaeAVmJtMtbgUCai/V1gAKCRDaeAVmJtMt
bse9AQDssuI+jeF6X/UGddy926zIie+YuVITcBzObT+3MSQSzQD9E1HZTRJeuqA/
dRS6Thf0k4VpES8ecF6NxifZJIS4VgQ=
=GUmn
-----END PGP SIGNATURE-----
Merge tag 'i2c-7.2-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux
Pull i2c updates from Andi Shyti:
"This pull request is mostly made of cleanups and small infrastructure
improvements across the I2C core, drivers and bindings. It also adds
support for three drivers and a few new compatibles.
Two major cleanup across drivers and core code:
- use named initializers in device ID tables
- replace dev_err() with dev_err_probe()
Drivers:
- at24: use named initializers for arrays of i2c_device_data
- at91: add MCHP_LAN966X_PCI dependency
- cadence: add shutdown callback
- k1: enable by default on SpacemiT
- mxs: improve documentation
- qcom-geni: use pm_runtime_force_suspend/resume for system sleep
- tegra:
- disable fair arbitration on non-MCTP buses
- allocate DMA buffers from the correct DMA device
- designware:
- handle active target shutdown cleanly
- add shutdown callbacks for platform and PCI drivers
- adopt the new PM_RUNTIME_ACQUIRE() helpers
DT bindings:
- convert davinci bindings to DT schema
Core and muxes:
- acpi: report missing I2C resources as -ENOENT
- gpiolib: add gpiod_is_single_ended() helper for I2C GPIO users
- i2c-mux-reg: add generic firmware node support
- a set of 10 patches from Johan Hovold fixing adapter registration
races, cleanup paths and resource management issues
New support:
- DesignWare LECA0003 (ACPI ID)
- Loongson LS2K0300 I2C controller (new driver)
- Qualcomm CCI Glymur and Shikra compatibles"
* tag 'i2c-7.2-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux: (46 commits)
i2c: mxs: add missing kernel-doc for struct mxs_i2c_dev members
i2c: qcom-geni: Use pm_runtime_force_{suspend,resume} helpers
dt-bindings: i2c: qcom-cci: Document Glymur compatible
dt-bindings: i2c: qcom-cci: Document Shikra compatible
i2c: mux: reg: use device property accessors
i2c: acpi: Return -ENOENT when no resources found in i2c_acpi_client_count()
i2c: at91: Add MCHP_LAN966X_PCI dependency
i2c: eg20t: Consistently define pci_device_ids using named initializers
i2c: designware-pcidrv: Consistently define pci_device_ids using named initializers
i2c: bcm-kona: fix spelling mistake in timeout-check comment
i2c: cadence: Add shutdown handler
i2c: tegra: Disable fair arbitration for non-MCTP buses
i2c: tegra: use dmaengine_get_dma_device() for DMA buffer allocation
i2c: busses: make K1 driver default for SpacemiT platforms
i2c: Use named initializers for arrays of i2c_device_data
i2c: core: clean up adapter registration error label
i2c: core: clean up bus id allocation
i2c: core: fix adapter deregistration race
i2c: core: fix adapter registration race
i2c: core: disable runtime PM on adapter registration failure
...
GPIO core:
- Add an initial set of kunit test cases for the GPIO subsystem
- Use the devres owner as the GPIO chip's parent in absence of any other
parent
- Fix const-correctness of GPIO chip SRCU guards
- Provide new GPIO consumer interfaces: gpiod_is_single_ended() and
fwnode_gpiod_get()
- Quarantine all legacy GPIO APIs in linux/gpio/legacy.h
- Use __ro_after_init where applicable
New drivers:
- Add driver for the GPIO controller on Waveshare DSI TOUCH panels
Removed drivers:
- Remove the obsolete ts5500 GPIO driver
Driver updates:
- Modernize gpio-timberdale: remove platform data support and use generic
device property accessors
- Extend test build coverage by enabling COMPILE_TEST for more GPIO
drivers
- Add some missing dependencies in Kconfig
- Add support for sparse fixed direction to gpio-regmap
- Remove dead code from gpio-nomadik
- use BIT() in gpio-mxc
- use bitmap_complement() in gpio-xilinx and gpio-pca953x
- Use more appropriate printing functions where applicable
- Use named initializers for platform_device_id and i2c_device_id arrays
- Convert gpio-altera to using the generic GPIO chip helper library
- Add support for new models to gpio-dwapb, gpio-zynq, gpio-usbio and
gpio-tegra186
- Unify the naming convention for Qualcomm in GPIO drivers
- Fix interrupt bank mapping to GPIO chips in gpio-mt7621
- Add support for the lines-initial-states property to gpio-74x164
- Switch to using dynamic GPIO base in gpio-ixp4xx
- Move the handling of an OF quirk from ASoC to gpiolib-of.c where other
such quirks live
- Use handle_bad_irq() in gpio-ep93xx
- Some other minor tweaks and refactorings
Devicetree bindings:
- Document the Waveshare GPIO controller for DSI TOUCH panels
- Document new models: Tegra238 in gpio-tegra186 and EIO GPIO in gpio-zynq
- Add new properties for gpio-dwapb and fairchild,74hc595
- Fix whitespace issues
- Sort compatibles alphabetically in gpio-zynq
Documentation:
- Fix kerneldoc warnings in gpio-realtek-otto
Misc:
- Attach software nodes representing GPIO chips to the actual struct
device objects associated with them in some legacy platforms enabling
real firmware node lookup instead of string matching
- Drop unneeded dependencies on OF_GPIO from bus and staging drivers
-----BEGIN PGP SIGNATURE-----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=MzJz
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There's one new driver, one legacy driver removed, a kunit test-suite
for the GPIO core, support for new models in existing drivers and a
slew of various changes in many places though I can't think of
anything controversial that would stand out - it's been a relatively
calm cycle.
GPIO core:
- Add an initial set of kunit test cases for the GPIO subsystem
- Use the devres owner as the GPIO chip's parent in absence of any
other parent
- Fix const-correctness of GPIO chip SRCU guards
- Provide new GPIO consumer interfaces: gpiod_is_single_ended() and
fwnode_gpiod_get()
- Quarantine all legacy GPIO APIs in linux/gpio/legacy.h
- Use __ro_after_init where applicable
New drivers:
- Add driver for the GPIO controller on Waveshare DSI TOUCH panels
Removed drivers:
- Remove the obsolete ts5500 GPIO driver
Driver updates:
- Modernize gpio-timberdale: remove platform data support and use
generic device property accessors
- Extend test build coverage by enabling COMPILE_TEST for more GPIO
drivers
- Add some missing dependencies in Kconfig
- Add support for sparse fixed direction to gpio-regmap
- Remove dead code from gpio-nomadik
- use BIT() in gpio-mxc
- use bitmap_complement() in gpio-xilinx and gpio-pca953x
- Use more appropriate printing functions where applicable
- Use named initializers for platform_device_id and i2c_device_id
arrays
- Convert gpio-altera to using the generic GPIO chip helper library
- Add support for new models to gpio-dwapb, gpio-zynq, gpio-usbio and
gpio-tegra186
- Unify the naming convention for Qualcomm in GPIO drivers
- Fix interrupt bank mapping to GPIO chips in gpio-mt7621
- Add support for the lines-initial-states property to gpio-74x164
- Switch to using dynamic GPIO base in gpio-ixp4xx
- Move the handling of an OF quirk from ASoC to gpiolib-of.c where
other such quirks live
- Use handle_bad_irq() in gpio-ep93xx
- Some other minor tweaks and refactorings
Devicetree bindings:
- Document the Waveshare GPIO controller for DSI TOUCH panels
- Document new models: Tegra238 in gpio-tegra186 and EIO GPIO in
gpio-zynq
- Add new properties for gpio-dwapb and fairchild,74hc595
- Fix whitespace issues
- Sort compatibles alphabetically in gpio-zynq
Documentation:
- Fix kerneldoc warnings in gpio-realtek-otto
Misc:
- Attach software nodes representing GPIO chips to the actual struct
device objects associated with them in some legacy platforms
enabling real firmware node lookup instead of string matching
- Drop unneeded dependencies on OF_GPIO from bus and staging drivers"
* tag 'gpio-updates-for-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (62 commits)
gpio: nomadik: remove dead DB8540 code from <gpio/gpio-nomadik.h>
gpio: mt7621: fix interrupt banks mapping on gpio chips
bus: ts-nbus: drop unneeded dependency on OF_GPIO
staging: media: max96712: drop unneeded dependency on OF_GPIO
gpiolib: Replace strcpy() with memcpy()
gpio: remove obsolete UAF FIXMEs from lookup paths
gpio: core: fix const-correctness of gpio_chip_guard
gpio: mxc: use BIT() macro
gpio: realtek-otto: fix kernel-doc warnings
gpio: max77620: Unify usage of space and comma in platform_device_id array
gpio: Use named initializers for platform_device_id arrays
gpio: cros-ec: Drop unused assignment of platform_device_id driver data
ARM: omap1: enable real software node lookup of GPIOs on Nokia 770
ARM: omap1: use platform_device_register_full() for GPIO devices on OMAP 16xx
ARM: omap1: drop unused variable from omap16xx_gpio_init()
gpio: gpiolib: use seq_puts() for plain strings
gpio: ts5500: remove obsolete driver
gpio: add kunit test cases for the GPIO subsystem
kunit: provide kunit_platform_device_unregister()
kunit: provide kunit_platform_device_register_full()
...
The usual mixture of minor fixes, a few cleanups, a new driver and dt
updates for the pwm subsystem.
Thanks to Chen Ni, Devi Priya, Manish Baing, Maurice Hieronymus, Ronaldo
Nunez, Rosen Penev, Shiji Yang and Yixun Lan for the actual changes and
Bjorn Andersson, Conor Dooley, Frank Li, Michal Wilczynski and Rob
Herring for reviews and acks.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmovj1UACgkQj4D7WH0S
/k4ATQf/YNPhLsDzLj0q7VM4wmMdBkX5s8e1yRAu4rRKMevWGP041MQMKxSiYU5k
7vSEvxGaK2c5nmM6Iop6KJ1+wkL3fQNG+o2e5iOyedgFlayoHTE/vMOsooLPyJ7G
thKFRQYqXenMtetY9n2fHaOtHayid/JWfZ1lQ9dlf8RDS1eN8dlgR/E4pNL5HUCv
n3McnhbBxUrxpQaSeTfBRGwVahCORcS01srlLeT/VXlCHVGAwIZu/qtWTlHH7jXZ
JO3iKxWlcUHvgt8BYxjpio3gYB9LZhunL23FtIHg48+HjYLyRS+JD2SYSWV2FZ+l
0oRKImnotlW2zeFskp8VIqReUrJMgg==
=4Uq3
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"The usual mixture of minor fixes, a few cleanups, a new driver and dt
updates for the pwm subsystem.
Thanks to Chen Ni, Devi Priya, Manish Baing, Maurice Hieronymus,
Ronaldo Nunez, Rosen Penev, Shiji Yang and Yixun Lan for the actual
changes and Bjorn Andersson, Conor Dooley, Frank Li, Michal Wilczynski
and Rob Herring for reviews and acks"
* tag 'pwm/for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: th1520: Remove requirement for mul_u64_u64_div_u64_roundup
dt-bindings: pwm: stmpe: Drop legacy binding
pwm: pca9685: Use named initializers for struct i2c_device_id
pwm: pxa: Add optional bus clock
dt-bindings: pwm: marvell,pxa-pwm: Add SpacemiT K3 PWM support
pwm: ipq: Add missing module description
pwm: stm32: Make use of mul_u64_u64_div_u64_roundup()
pwm: Consistently define pci_device_ids using named initializers
pwm: Driver for qualcomm ipq6018 pwm block
pwm: imx27: Fix variable truncation in .apply()
pwm: mediatek: correct mt7628 clock source setting
pwm: mediatek: set mt7628 pwm45_fixup flag to false
pwm: atmel-tcb: Remove unneeded semicolon
According to OPEN Alliance 10BASE-T1x MACPHY Serial Interface (TC6)
specification, interrupt type is active low, level triggered interrupt.
Specification calls for when interrupt level will be asserted and what
condition it is de-asserted. By using edge triggered interrupt, there is a
potential chance to miss it, particularly if it is asserted when interrupt
is disabled.
Level triggered interrupt can't be missed as it gets de-asserted only on
interrupt handler taking actions on interrupting conditions.
Fixes: ac49b950be ("dt-bindings: net: add Microchip's LAN865X 10BASE-T1S MACPHY")
Signed-off-by: Selvamani Rajagopal <Selvamani.Rajagopal@onsemi.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260611-level-trigger-v5-4-4533a9e85ce2@onsemi.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert TI irq-crossbar binding from text format to DT schema.
As part of conversion following changes are made:
- Add '#interrupt-cells' as a required property which was missing in
text binding
- As irq-crossbar is interrupt-controller. Move binding from
bindings/arm/omap to bindings/interrupt-controller
Signed-off-by: Bhargav Joshi <j.bhargav.u@gmail.com>
Link: https://patch.msgid.link/20260612-crossbar-v3-1-266747bc2e86@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
- Add devm helpers for clocksources, which allows to simplify driver
teardown and probe failure handling.
- More module conversion work
- Update the support for the ARM EL2 virtual timer including the required
ACPI changes.
- Add clockevent and clocksource support for the TI Dual Mode Timer
- Fix the support for multiple watchdog instances in the TEGRA186 driver
- Add D1 timer support to the SUN5I driver
- The usual devicetree updates, cleanups and small fixes all over the place
-----BEGIN PGP SIGNATURE-----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=4vQE
-----END PGP SIGNATURE-----
Merge tag 'timers-clocksource-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull clocksource updates from Thomas Gleixner:
"Updates for clocksource/clockevent drivers:
- Add devm helpers for clocksources, which allows to simplify driver
teardown and probe failure handling.
- More module conversion work
- Update the support for the ARM EL2 virtual timer including the
required ACPI changes.
- Add clockevent and clocksource support for the TI Dual Mode Timer
- Fix the support for multiple watchdog instances in the TEGRA186
driver
- Add D1 timer support to the SUN5I driver
- The usual devicetree updates, cleanups and small fixes all over the
place"
* tag 'timers-clocksource-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (24 commits)
clocksource: move NXP timer selection to drivers/clocksource
clocksource/drivers/timer-tegra186: Reserve and service a kernel watchdog
clocksource/drivers/timer-tegra186: Register all accessible watchdog timers
clocksource/drivers/timer-tegra186: Correct num_wdts for Tegra186 and Tegra234
clocksource/drivers/timer-tegra186: Fix support for multiple watchdog instances
clocksource/drivers/timer-ti-dm: Add clockevent support
clocksource/drivers/timer-ti-dm: Add clocksource support
clocksource/drivers/timer-ti-dm: Fix property name in comment
dt-bindings: timer: arm,arch_timer: Fix requirements for interrupt description
clocksource/drivers/arm_arch_timer: Default to EL2 virtual timer when running VHE
ACPI: GTDT: Parse information related to the EL2 virtual timer
ACPI: GTDT: Account for GTDTv3 size when walking the platform timer descriptors
clocksource: Add devm_clocksource_register_*() helpers
clocksource/drivers/sun5i: Add D1 hstimer support
dt-bindings: timer: allwinner,sun5i-a13-hstimer: add H616 and D1
dt-bindings: timer: Add StarFive JHB100 clint
dt-bindings: timer: renesas,rz-mtu3: document RZ/{T2H,N2H}
dt-bindings: timer: renesas,rz-mtu3: Remove TCIU8 interrupt
dt-bindings: timer: Remove sifive,fine-ctr-bits property
clocksource/drivers/timer-of: Make the code compatible with modules
...
- Replace the support for the AST2700-A0 early silicon with a proper
driver for the final A2 production silicon
- Rename and rework the StarFive JH8100 interrupt controller for the new
JHB100 SoC as JH8100 was discontinued before production.
- Add support for Amlogic A9 SoCs to the meson-gpio interrupt controller
- Expand the Econet interrupt controller driver to support MIPS 34Kc
Vectored External Interrupt Controller mode.
- Prevent a NULL pointer dereference in the GICv4 code as the vLPI code
blindly assumes that the ITS was populated. Add the missing sanity check.
- Add support for software triggered and for error interrupts to the
Renesas RZ/T2H driver.
- Add interrupt redirection support for the loongarch architecture.
- Add multicore support to the Realtek RTL interrupt driver
- The usual updates, enhancements and fixes all over the place
-----BEGIN PGP SIGNATURE-----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=zJc2
-----END PGP SIGNATURE-----
Merge tag 'irq-drivers-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull interrupt chip driver updates from Thomas Gleixner:
- Replace the support for the AST2700-A0 early silicon with a proper
driver for the final A2 production silicon
- Rename and rework the StarFive JH8100 interrupt controller for the
new JHB100 SoC as JH8100 was discontinued before production.
- Add support for Amlogic A9 SoCs to the meson-gpio interrupt
controller
- Expand the Econet interrupt controller driver to support MIPS 34Kc
Vectored External Interrupt Controller mode.
- Prevent a NULL pointer dereference in the GICv4 code as the vLPI code
blindly assumes that the ITS was populated. Add the missing sanity
check.
- Add support for software triggered and for error interrupts to the
Renesas RZ/T2H driver.
- Add interrupt redirection support for the loongarch architecture.
- Add multicore support to the Realtek RTL interrupt driver
- The usual updates, enhancements and fixes all over the place
* tag 'irq-drivers-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (32 commits)
irqchip/irq-realtek-rtl: Add multicore support
irqchip/irq-realtek-rtl: Add/simplify register helpers
irqchip/loongarch-ir: Add IR (interrupt redirection) irqchip support
irqchip/loongarch-avec: Return IRQ_SET_MASK_OK_DONE when keep affinity
irqchip/loongarch-avec: Prepare for interrupt redirection support
Docs/LoongArch: Add advanced extended IRQ model
irqchip/qcom-pdc: Use FIELD_GET() to extract bank index and bit position
irqchip/qcom-pdc: Add PDC_VERSION() macro to describe version register fields
irqchip/qcom-pdc: Tighten ioremap clamp to single DRV region size
irqchip/qcom-pdc: Split __pdc_enable_intr() into per-version helpers
irqchip/exynos-combiner: Remove useless spinlock
irqchip/renesas-rzt2h: Add error interrupts support
irqchip/renesas-rzt2h: Add software-triggered interrupts support
irqchip/gic-v4: Don't advertise VLPIs if no ITS is probed
irqchip/gic-v3-its: Use FIELD_MODIFY()
irqchip/econet-en751221: Support MIPS 34Kc VEIC mode
dt-bindings: interrupt-controller: econet: Add CPU interrupt mapping
irqchip/meson-gpio: Add support for Amlogic A9 SoCs
dt-bindings: interrupt-controller: Add support for Amlogic A9 SoCs
irqchip/meson-gpio: Use the correct register in meson_s4_gpio_irq_set_type()
...
- Fix a race between cpufreq suspend and CPU hotplug during system
shutdown (Tianxiang Chen)
- Avoid redundant target() calls for unchanged limits and fix a typo
in a comment in the cpufreq core (Viresh Kumar)
- Fix concurrency issues related to sysfs attributes access that affect
cpufreq governors using the common governor code (Zhongqiu Han)
- Simplify frequency limit handling in the conservative cpufreq
governor (Lifeng Zheng)
- Fix descriptions of the conservative governor freq_step tunable and
the ondemand governor sampling_down_factor tunable in the cpufreq
documentation (Pengjie Zhang)
- Fix use-after-free and double free during _OSC evaluation in the PCC
cpufreq driver (Yuho Choi)
- Rework the handling of policy min and max frequency values in the
cpufreq core to allow drivers to specify special initial values for
the scaling_min_freq and scaling_max_freq sysfs attributes (Pierre
Gondois)
- Add cpufreq scaling support for Qualcomm Shikra SoC (Taniya Das,
Imran Shaik).
- Improve the warning message on HWP-disabled hybrid processors printed
by the intel_pstate driver and sync policy->cur during CPU offline in
it (Yohei Kojima, Fushuai Wang)
- Drop cpufreq support for AMD Elan SC4* (Sean Young)
- Minor fixes for cpufreq drivers (Krzysztof Kozlowski, Akashdeep Kaur,
Hans Zhang, Guangshuo Li, Xueqin Luo)
- Clean up dead dependencies on X86 in the cpufreq Kconfig (Julian
Braha)
- Allow the intel_idle driver to avoid exposing C-states that are
redundant when PC6 is disabled (Artem Bityutskiy)
- Fix memory leak and a potential race in the OPP core (Abdun Nihaal,
Di Shen)
- Mark Rust OPP methods as inline (Nicolás Antinori)
- Fix misc device registration failure path in the PM QoS core (Yuho
Choi)
- Add sysctl interface for DPM watchdog timeouts (Tzung-Bi Shih)
- Use complete() instead of complete_all() in device_pm_sleep_init() to
avoid a false-positive warning from lockdep_assert_RT_in_threaded_ctx()
when CONFIG_PROVE_RAW_LOCK_NESTING is enabled (Jiakai Xu)
- Use a flexible array for CRC uncompressed buffers during hibernation
image saving (Rosen Penev)
- Make the LZ4 algorithm available for hibernation compression (l1rox3)
- Move the preallocate_image() call during hibernation after the
"prepare" phase of the "freeze" transition (Matthew Leach)
- Fix a memory leak in rapl_add_package_cpuslocked() in the intel_rapl
power capping driver and use sysfs_emit() in cpumask_show() in that
driver (Sumeet Pawnikar, Yury Norov)
- Fix ValueError when parsing incomplete device properties in the
pm-graph utility (Gongwei Li)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmor9R8SHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1ODoIAInJsQeeWGXfUq4hAFnoA/gtS2oBw7Kw
QVjoGG/DUbM/+ZtlbUee27pqvaYRY+q/Tv9RWKkl5vckASPFIAgCjImbm0g3P7Rz
9OgoBwppqv0Yn5whFgc7nt9jOa7FQKV+jHiJgzRqwMxDFLkk0LldYVzsYpB6m+Lx
Kca0LBeSv8o16EZX7RChC+6W7E5UhGxekSg9AzMPJTCe0gKciwARYiBhbSU5nAlI
WdL5j+ycR3QTApbHA2tueaPKa1qnomLwJscmsE6UxlbikfcCBFZ9EvIsBnwl1WM4
EcPA57IAYcr29N9Cdh/cs6MFkpWdzDBOs/ECZsgdI6fUWniQrPINThI=
=oafL
-----END PGP SIGNATURE-----
Merge tag 'pm-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"Over a half of the changes here are cpufreq updates that include core
modifications, fixes of the old-style governors, new hardware support
in drivers, assorded driver fixes and cleanups, and the removal of one
driver (AMD Elan SC4*).
Apart from that, the intel_idle driver will now be able to avoid
exposing redundant C-states if PC6 is disabled and there are new
sysctl knobs for device suspend/resume watchdog timeouts, hibernation
gets built-in LZ4 support for image compression and there is the usual
collection of assorted fixes and cleanups.
Specifics:
- Fix a race between cpufreq suspend and CPU hotplug during system
shutdown (Tianxiang Chen)
- Avoid redundant target() calls for unchanged limits and fix a typo
in a comment in the cpufreq core (Viresh Kumar)
- Fix concurrency issues related to sysfs attributes access that
affect cpufreq governors using the common governor code (Zhongqiu
Han)
- Simplify frequency limit handling in the conservative cpufreq
governor (Lifeng Zheng)
- Fix descriptions of the conservative governor freq_step tunable and
the ondemand governor sampling_down_factor tunable in the cpufreq
documentation (Pengjie Zhang)
- Fix use-after-free and double free during _OSC evaluation in the
PCC cpufreq driver (Yuho Choi)
- Rework the handling of policy min and max frequency values in the
cpufreq core to allow drivers to specify special initial values for
the scaling_min_freq and scaling_max_freq sysfs attributes (Pierre
Gondois)
- Add cpufreq scaling support for Qualcomm Shikra SoC (Taniya Das,
Imran Shaik).
- Improve the warning message on HWP-disabled hybrid processors
printed by the intel_pstate driver and sync policy->cur during CPU
offline in it (Yohei Kojima, Fushuai Wang)
- Drop cpufreq support for AMD Elan SC4* (Sean Young)
- Minor fixes for cpufreq drivers (Krzysztof Kozlowski, Akashdeep
Kaur, Hans Zhang, Guangshuo Li, Xueqin Luo)
- Clean up dead dependencies on X86 in the cpufreq Kconfig (Julian
Braha)
- Allow the intel_idle driver to avoid exposing C-states that are
redundant when PC6 is disabled (Artem Bityutskiy)
- Fix memory leak and a potential race in the OPP core (Abdun Nihaal,
Di Shen)
- Mark Rust OPP methods as inline (Nicolás Antinori)
- Fix misc device registration failure path in the PM QoS core (Yuho
Choi)
- Add sysctl interface for DPM watchdog timeouts (Tzung-Bi Shih)
- Use complete() instead of complete_all() in device_pm_sleep_init()
to avoid a false-positive warning from lockdep_assert_RT_in_threaded_ctx()
when CONFIG_PROVE_RAW_LOCK_NESTING is enabled (Jiakai Xu)
- Use a flexible array for CRC uncompressed buffers during
hibernation image saving (Rosen Penev)
- Make the LZ4 algorithm available for hibernation compression
(l1rox3)
- Move the preallocate_image() call during hibernation after the
"prepare" phase of the "freeze" transition (Matthew Leach)
- Fix a memory leak in rapl_add_package_cpuslocked() in the
intel_rapl power capping driver and use sysfs_emit() in
cpumask_show() in that driver (Sumeet Pawnikar, Yury Norov)
- Fix ValueError when parsing incomplete device properties in the
pm-graph utility (Gongwei Li)"
* tag 'pm-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm: (40 commits)
PM: dpm_watchdog: Add sysctl interface for DPM watchdog timeouts
PM: QoS: Fix misc device registration unwind
cpufreq: Use policy->min/max init as QoS request
cpufreq: Remove driver default policy->min/max init
cpufreq: Set default policy->min/max values for all drivers
cpufreq: Extract cpufreq_policy_init_qos() function
cpufreq: Documentation: fix conservative governor freq_step description
cpufreq: ti: Add EPROBE_DEFER for K3 SoCs
cpufreq: qcom: Add cpufreq scaling support for Qualcomm Shikra SoC
dt-bindings: cpufreq: Document Qualcomm Shikra SoC EPSS
powercap: intel_rapl: Use sysfs_emit() in cpumask_show()
cpufreq: governor: Fix stale prev_cpu_nice spike when enabling ignore_nice_load
cpufreq: governor: Fix data races on per-CPU idle/nice baselines
PM: hibernate: Use flexible array for CRC uncompressed buffers
powercap: intel_rapl: Fix memory leak in rapl_add_package_cpuslocked()
PM: hibernate: make LZ4 available for hibernation compression
PM: sleep: Use complete() in device_pm_sleep_init()
opp: rust: mark OPP methods as inline
cpufreq: intel_pstate: Improve warning message on HWP-disabled hybrid CPUs
cpufreq: elanfreq: Drop support for AMD Elan SC4*
...
- Rework the initialization and cleanup of thermal class cooling
devices to separate DT-based cooling device registration and
cooling device registration without DT (Daniel Lezcano, Ovidiu
Panait)
- Update the cooling device DT bindings to support 3-cell cooling
device representation, where the additional cell holds an ID to
select a cooling mechanism for devices that offer multiple cooling
mechanisms, and adjust the cooling device registration code
accordingly (Gaurav Kohli, Daniel Lezcano)
- Remove dead code from two functions in the thermal core and simplify
the unregistration of thermal governors (Rafael Wysocki)
- Fix critical temperature attribute removal handling in the generic
thermal zone hwmon support code and rework that code to register a
separate hwmon class device for each thermal zone (instead of using
one hwmon class device for all thermal zones of the same type) to
address thermal zone removal deadlocks (Rafael Wysocki)
- Use attribute groups for adding temperature attributes to hwmon class
devices associated with thermal zones (Rafael Wysocki)
- Pass WQ_UNBOUND when allocating the thermal workqueue (Marco
Crivellari)
- Fix potential shift overflow in ptc_mmio_write() and improve error
handling in proc_thermal_ptc_add() in the int340x thermal control
driver (Aravind Anilraj)
- Use sysfs_emit() for cpumask printing in the Intel powerclamp thermal
driver (Yury Norov)
- Add Arrow Lake CPU models to the intel_tcc_cooling driver (Srinivas
Pandruvada)
- Add QCom Nord, Shikra and Hawi temperature sensor DT bindings (Deepti
Jaggi, Gaurav Kohli, Dipa Ramesh Mantre)
- Use devm_add_action_or_reset() for clock disable on the NVidia
soctherm and switch it to devm cooling device registration version
(Daniel Lezcano)
- Add the Amlogic T7 thermal sensor along with thermal calibration
data read from SMC calls (Ronald Claveau)
- Fix atomic temperature read in the QCom tsens driver to comply with
hardware documentation (Priyansh Jain)
- Add SpacemiT K1 thermal sensor support (Shuwei Wu)
- Add i.MX93 temperature sensor support and filter out the invalid
temperature (Jacky Bai)
- Enable by default the TMU (Thermal Monitoring Unit) on Exynos
platform (Krzysztof Kozlowski)
- Rework interrupt initialization in the Tsens driver and add the
optional wakeup source (Priyansh Jain)
- Fix typo in a comment in the TSens QCom driver (Jinseok Kim)
- Fix trailing whitespace and repeated word in the OF code, remove
quoted string splitting across lines from the iMX7 driver, and remove
a stray space from the thermal_trip_of_attr() macro definition (Mayur
Kumar)
- Update the thermal testing facility code to avoid NULL pointer
dereferences by rejecting missing command arguments and replace
sscanf() with kstrtoint() or kstrtoul() in that code (Ovidiu Panait,
Samuel Moelius)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmor9mMSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1VGcH/0abvuB55F8kuN6udDVxKcEbwTK0uLs2
R2lsLm6pqV6PGJ6wK6dy0wjlf9fhzoQLEmJwInBgt4NIrIV6WY7L8MTk35y477q7
NDqF2IuwClbpT2f3ojfVHdZNa5tu7Z+WV/Ohc40Pc7AeCU3TRk6mnFrY/aTkr4Ej
CLCEVwOFt1g5wCzyZGzX65lXXRT/dYKcVM+wgX6pXeOcdhIRAVOnQDFa0H7i0blD
AW5BLbZe29guD1GPmwjCgY/H/dwsTYR0GSgdTK90b1njOPgVVDAKXNO7oVa4rOmU
L4JralFt1sj3UQqAwJ8q8etl+BzsQIzLGtYwYEfrZUe4NnhcUwk8qGU=
=MVHT
-----END PGP SIGNATURE-----
Merge tag 'thermal-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add new hardware support (i.MX93 TMU, Amlogic T7, Intel Arrow
Lake, QCom Nord, Shikra and Hawi), fix issues in a number of places in
the thermal control core and drivers, clean up code and refactor it in
preparation for future changes:
- Rework the initialization and cleanup of thermal class cooling
devices to separate DT-based cooling device registration and
cooling device registration without DT (Daniel Lezcano, Ovidiu
Panait)
- Update the cooling device DT bindings to support 3-cell cooling
device representation, where the additional cell holds an ID to
select a cooling mechanism for devices that offer multiple cooling
mechanisms, and adjust the cooling device registration code
accordingly (Gaurav Kohli, Daniel Lezcano)
- Remove dead code from two functions in the thermal core and
simplify the unregistration of thermal governors (Rafael Wysocki)
- Fix critical temperature attribute removal handling in the generic
thermal zone hwmon support code and rework that code to register a
separate hwmon class device for each thermal zone (instead of using
one hwmon class device for all thermal zones of the same type) to
address thermal zone removal deadlocks (Rafael Wysocki)
- Use attribute groups for adding temperature attributes to hwmon
class devices associated with thermal zones (Rafael Wysocki)
- Pass WQ_UNBOUND when allocating the thermal workqueue (Marco
Crivellari)
- Fix potential shift overflow in ptc_mmio_write() and improve error
handling in proc_thermal_ptc_add() in the int340x thermal control
driver (Aravind Anilraj)
- Use sysfs_emit() for cpumask printing in the Intel powerclamp
thermal driver (Yury Norov)
- Add Arrow Lake CPU models to the intel_tcc_cooling driver (Srinivas
Pandruvada)
- Add QCom Nord, Shikra and Hawi temperature sensor DT bindings
(Deepti Jaggi, Gaurav Kohli, Dipa Ramesh Mantre)
- Use devm_add_action_or_reset() for clock disable on the NVidia
soctherm and switch it to devm cooling device registration version
(Daniel Lezcano)
- Add the Amlogic T7 thermal sensor along with thermal calibration
data read from SMC calls (Ronald Claveau)
- Fix atomic temperature read in the QCom tsens driver to comply with
hardware documentation (Priyansh Jain)
- Add SpacemiT K1 thermal sensor support (Shuwei Wu)
- Add i.MX93 temperature sensor support and filter out the invalid
temperature (Jacky Bai)
- Enable by default the TMU (Thermal Monitoring Unit) on Exynos
platform (Krzysztof Kozlowski)
- Rework interrupt initialization in the Tsens driver and add the
optional wakeup source (Priyansh Jain)
- Fix typo in a comment in the TSens QCom driver (Jinseok Kim)
- Fix trailing whitespace and repeated word in the OF code, remove
quoted string splitting across lines from the iMX7 driver, and
remove a stray space from the thermal_trip_of_attr() macro
definition (Mayur Kumar)
- Update the thermal testing facility code to avoid NULL pointer
dereferences by rejecting missing command arguments and replace
sscanf() with kstrtoint() or kstrtoul() in that code (Ovidiu
Panait, Samuel Moelius)"
* tag 'thermal-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm: (54 commits)
thermal: sysfs: Replace sscanf() with kstrtoul()
thermal: testing: Replace sscanf() with kstrtoint()
thermal: testing: reject missing command arguments
thermal: intel: intel_tcc_cooling: Add Arrow Lake CPU models
thermal/drivers/qcom/tsens: Disable wakeup interrupt setup on automotive targets
thermal/drivers/qcom/tsens: Switch wake IRQ handling to PM callbacks
thermal/core: Fix missing stub for devm_thermal_cooling_device_register
dt-bindings: thermal: cooling-devices: Update support for 3 cells cooling device
thermal/of: Support cooling device ID in cooling-spec
thermal/of: Pass cdev_id and introduce devm registration helper
thermal/of: Add cooling device ID support
thermal/of: Rename the devm_thermal_of_cooling_device_register() function
thermal/core: Make cooling device OF node conditional on CONFIG_THERMAL_OF
thermal/of: Move cooling device OF helpers out of thermal core
hwmon: Use non-OF thermal cooling device registration API
thermal/core: Add devm_thermal_cooling_device_register()
thermal/core: Introduce non-OF thermal_cooling_device_register()
thermal/drivers/samsung: Enable TMU by default
thermal/driver/qoriq: Workaround unexpected temperature readings from tmu
thermal/drivers/qoriq: Add i.MX93 tmu support
...
Add the microchip,sama7d65-i3c-hci compatible string to the MIPI I3C
HCI binding. The Microchip SAMA7D65 I3C controller is based on the
MIPI HCI specification but requires two clocks, so add a conditional
constraint when this compatible is present.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Link: https://patch.msgid.link/20260525092405.1514213-2-manikandan.m@microchip.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Since K230 was released, K210 is no longer the only SoC in the Kendryte
series, so remove the K210 string from the description. Also, add two
boards based on k230 to compatible strings to allow them to be used in the
dt.
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
"realtek,gpio-config" is described as six 8-bit GPIO configuration
values, and the RT5677 driver stores and reads those values as bytes.
The binding incorrectly documented the property as a uint32 array.
Document "realtek,gpio-config" as a uint8-array so the generated
schema matches the hardware definition and the existing driver helper.
Assisted-by: Codex:gpt-5-5
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260612214911.1883234-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert lan9303.txt to yaml format to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx53-kp-hsc.dtb: /soc/bus@50000000/i2c@53fec000/switch@a: failed to match any schema with compatible: ['smsc,lan9303-i2c']
Additional changes:
- rename switch-phy to switch in example.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260610150533.515914-1-Frank.Li@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
redundant information (Nick Hu)
- Remove the TCIU8 interrupt bindings on Renesas because it should not
be described as the documentation marked reserved and fix the
conditional reset line for the RZ/{T2H,N2H} (Cosmin Tanislav)
- Add the StarFive JHB100 clint DT bindings compatible string (Ley
Foon Tan)
- Extend schema condition for interrupts to cover D1 compatible
variant an add the D1 hstimer support (Michal Piekos)
- Update the ARM architected timer support to handle the ACPI GTDT v3
format and the EL2 virtual timer, enabling Linux to use the most
appropriate timer when running with VHE, while also fixing several
Device Trees to accurately reflect the underlying hardware (Marc
Zyngier)
- Cleanup and add the clocksource and the clockevent in the TI DM
timer (Markus Schneider-Pargmann)
- Add the multiple watchdogs support in the tegra186 and
tegra234. Dedicate one as a kernel watchdog (Kartik Rajput)
- Add the NXP clocksource selection for the scheduler in the Kconfig
(Enric Balletbo i Serra)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmoq0wgACgkQqDIjiipP
6E8Ungf/SNh8g6NbP6Gqg5Vs0WxlM75EGeJsryLFXooXjLa2TJVh5/i3fm0kh8uG
xi/cs2NLWsAMezLwLQhmB+mMGzsZh4WswgTu7EqCkXgd+TMqV9Wi57vU18nOX8gs
XKGxCUqg+kOGAoj5FsZLyq6Sy/NfMHxxY2kSq4oUG2o/xWaLYwDvRcW8iXXAjj/U
321YrB77lJ+FefUiZveiykf+QjzOXkiPlJTGroOcEL8F/Hm5YMBDfAtW6zslfiFw
KmOjraY9wkRqQVT9xFeJrssCpn8iCzb9DXpKQUkTAahYgVc0Im7g3p/GOkUHmQFE
KfvgBNO/tt3+m/Q8FO3la8gPF6LuaA==
=upV/
-----END PGP SIGNATURE-----
Merge tag 'timers-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daniel.lezcano/linux into timers/clocksource
Pull clocksource/driver updates from Daniel Lezcano:
- Remove the sifive,fine-ctr-bits property bindings because it is a
redundant information (Nick Hu)
- Remove the TCIU8 interrupt bindings on Renesas because it should not
be described as the documentation marked reserved and fix the
conditional reset line for the RZ/{T2H,N2H} (Cosmin Tanislav)
- Add the StarFive JHB100 clint DT bindings compatible string (Ley
Foon Tan)
- Extend schema condition for interrupts to cover D1 compatible
variant an add the D1 hstimer support (Michal Piekos)
- Update the ARM architected timer support to handle the ACPI GTDT v3
format and the EL2 virtual timer, enabling Linux to use the most
appropriate timer when running with VHE, while also fixing several
Device Trees to accurately reflect the underlying hardware (Marc
Zyngier)
- Cleanup and add the clocksource and the clockevent in the TI DM
timer (Markus Schneider-Pargmann)
- Add the multiple watchdogs support in the tegra186 and
tegra234. Dedicate one as a kernel watchdog (Kartik Rajput)
- Add the NXP clocksource selection for the scheduler in the Kconfig
(Enric Balletbo i Serra)
Link: https://lore.kernel.org/all/1e55e8d6-8024-4f17-8620-ab3385465d76@oss.qualcomm.com
The 10G Realtek Otto switches are divided into two series
- Longan: RTL930x up to 28 ports
- Mango : RTL931x up to 56 ports
The Mango based devices have 3 different SoCs RTL9311, RTL9312 and RTL9313.
The MDIO controller of these switches works like the existing RTL930x
logic but has different characteristics and different registers. Add new
compatibles in the device tree.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://patch.msgid.link/20260610194145.4153668-2-markus.stockhausen@gmx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add description for the EC firmware running on Hamoa/Purwa and Glymur
reference devices.
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Co-developed-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Co-developed-by: Anvesh Jain P <anvesh.p@oss.qualcomm.com>
Signed-off-by: Anvesh Jain P <anvesh.p@oss.qualcomm.com>
Link: https://patch.msgid.link/20260511-add-driver-for-ec-v9-1-e5437c39b7f8@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Apple Silicon devices integrate a vast array of sensors, monitoring
current, power, temperature, and voltage across almost every part of
the system. The sensors themselves are all connected to the System
Management Controller (SMC). The SMC firmware exposes the data
reported by these sensors via its standard FourCC-based key-value
API. The SMC is also responsible for monitoring and controlling any
fans connected to the system, exposing them in the same way.
For reasons known only to Apple, each device exposes its sensors with
an almost totally unique set of keys. This is true even for devices
which share an SoC. An M1 Mac mini, for example, will report its core
temperatures on different keys to an M1 MacBook Pro. Worse still, the
SMC does not provide a way to enumerate the available keys at runtime,
nor do the keys follow any sort of reasonable or consistent naming
rules that could be used to deduce their purpose. We must therefore
know which keys are present on any given device, and which function
they serve, ahead of time.
Add a schema so that we can describe the available sensors for a given
Apple Silicon device in the Devicetree.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20251215-macsmc-subdevs-v6-1-0518cb5f28ae@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The YAML conversion added me as maintainer but I can't recall being
asked nor do I want to maintain it. Add Peter as maintainer for the
binding as he is maintainer of the driver.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Peter Korsgaard <peter.korsgaard@barco.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Document the Inter-Processor Communication Controller on the Qualcomm
Maili Platform, which will be used to route interrupts across various
subsystems found on the SoC.
Signed-off-by: Chunkai Deng <chunkai.deng@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Further testing revealed that the RX and TX clocks of the IPQ5018 PHY
need to be explicitly enabled. As such, add the required clocks to the
schema.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://patch.msgid.link/20260608-ipq5018-gephy-clocks-v4-2-fb2ccd56894b@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The clocks property has a restriction to maximum one.
Yet, some PHYs may require more than 1 clock such as the IPQ5018 PHY
which requires two clocks for RX and TX. As such, increase maxItems to
two.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://patch.msgid.link/20260608-ipq5018-gephy-clocks-v4-1-fb2ccd56894b@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bui duc phuc <phucduc.bui@gmail.com> says:
This series reorders the runtime resume clock enable sequence in the
Rockchip SPDIF and PDM drivers to enable the bus clock before the
functional controller clock.
It also updates the SPDIF DT binding clock descriptions to match the
actual clock usage in the driver.
Additionally, this v2 adds two new patches addressing issues reported
by the Sashiko AI Review tool regarding regcache sync failure handling
and runtime PM resume status validation.
Testing:
- Patch 1: Verified (dt_binding_check passed).
- Patches 2 to 5: Compile tested only. Please help test if you have
the relevant Rockchip hardware.
Link: https://patch.msgid.link/20260602101608.45137-1-phucduc.bui@gmail.com
Update the binding descriptions to match the actual clock usage, where
'mclk' is the controller clock and 'hclk' is the bus clock.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260602101608.45137-2-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge cpufreq updates for 7.2:
- Fix a race between cpufreq suspend and CPU hotplug during system
shutdown (Tianxiang Chen)
- Avoid redundant target() calls for unchanged limits and fix a typo
in a comment in the cpufreq core (Viresh Kumar)
- Fix concurrency issues related to sysfs attributes access that affect
cpufreq governors using the common governor code (Zhongqiu Han)
- Simplify frequency limit handling in the conservative cpufreq
governor (Lifeng Zheng)
- Fix descriptions of the conservative governor freq_step tunable and
the ondemand governor sampling_down_factor tunable in the cpufreq
documentation (Pengjie Zhang)
- Fix use-after-free and double free during _OSC evaluation in the PCC
cpufreq driver (Yuho Choi)
- Rework the handling of policy min and max frequency values in the
cpufreq core to allow drivers to specify special initial values for
the scaling_min_freq and scaling_max_freq sysfs attributes (Pierre
Gondois)
- Add cpufreq scaling support for Qualcomm Shikra SoC (Taniya Das,
Imran Shaik).
- Improve the warning message on HWP-disabled hybrid processors printed
by the intel_pstate driver and sync policy->cur during CPU offline in
it (Yohei Kojima, Fushuai Wang)
- Drop cpufreq support for AMD Elan SC4* (Sean Young)
- Minor fixes for cpufreq drivers (Krzysztof Kozlowski, Akashdeep Kaur,
Hans Zhang, Guangshuo Li, Xueqin Luo)
- Clean up dead dependencies on X86 in the cpufreq Kconfig (Julian
Braha)
* pm-cpufreq: (25 commits)
cpufreq: Use policy->min/max init as QoS request
cpufreq: Remove driver default policy->min/max init
cpufreq: Set default policy->min/max values for all drivers
cpufreq: Extract cpufreq_policy_init_qos() function
cpufreq: Documentation: fix conservative governor freq_step description
cpufreq: ti: Add EPROBE_DEFER for K3 SoCs
cpufreq: qcom: Add cpufreq scaling support for Qualcomm Shikra SoC
dt-bindings: cpufreq: Document Qualcomm Shikra SoC EPSS
cpufreq: governor: Fix stale prev_cpu_nice spike when enabling ignore_nice_load
cpufreq: governor: Fix data races on per-CPU idle/nice baselines
cpufreq: intel_pstate: Improve warning message on HWP-disabled hybrid CPUs
cpufreq: elanfreq: Drop support for AMD Elan SC4*
cpufreq: clean up dead dependencies on X86 in Kconfig
cpufreq: conservative: Simplify frequency limit handling
cpufreq: Avoid redundant target() calls for unchanged limits
cpufreq: Fix typo in comment
cpufreq: intel_pstate: Sync policy->cur during CPU offline
cpufreq: Documentation: fix sampling_down_factor range
cpufreq: Fix hotplug-suspend race during reboot
cpufreq: pcc: fix use-after-free and double free in _OSC evaluation
...
Adding documentation for NXPs TJA1145 CAN transceiver, which resides like
the ti,tcan104x-can.yaml in the same directory as other generic PHY
subsystem bindings. At the moment there is only support for simple PHYs
by using regulator bindings in combination with can-transceiver.yaml or
PHYs that implement the generic PHY subsystem like the NXP TJA1145.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Link: https://patch.msgid.link/20260602-tja1145-support-v6-1-0e0ffc8ee63d@liebherr.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add compatible string for TI SN65LVDS93. Similar to
SN65LVDS83 but with an industrial temperature range.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add doc for the pinctrl controllers on the UltraRISC DP1000 RISC-V SoC.
Signed-off-by: Jia Wang <wangjia@ultrarisc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add 24 pin groups, and their matching drive groups, on ports EE, FF,
GG and HH to the Tegra238 AON pinmux binding. These groups are present
on the AON pin controller, so device trees that mux these pins through
it validate against the schema.
Fixes: 9323f8a0e1 ("dt-bindings: pinctrl: Document Tegra238 pin controllers")
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The Allwinner A523 SoC implements 10 GPIO banks in the first pinctrl
instance, but it skips the first bank (PortA), so their index goes from
1 to 10. The same is actually true for the IRQ banks: there are registers
for 11 banks, though the first bank is not implemented (RAZ/WI).
In contrast to previous SoCs, the count of the IRQ banks starts with this
first unimplemented bank, so we need to provide an interrupt for it.
And indeed the A523 user manual lists an interrupt number for PortA, so we
need to increase the maximum number of interrupts per pin controller to 11,
to be able to assign the correct interrupt number for each bank.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add dt-bindings for the USB3 QMP PHY found on the Qualcomm IPQ5210 SoC. The
IPQ5210 PHY is compatible with the IPQ9574 PHY, so add it as a fallback-
compatible entry using a oneOf construct rather than a plain enum entry.
Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260608103344.2740174-3-varadarajan.narayanan@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document the QUSB2 PHY compatible for the IPQ5210 SoC. The IPQ5210 PHY is
compatible with the IPQ6018 QUSB2 PHY, so allow it to use
qcom,ipq6018-qusb2-phy as the fallback compatible.
Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260608103344.2740174-2-varadarajan.narayanan@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add a schema for the 10G Lynx SerDes. This is very similar to the modern
form of the 28G Lynx SerDes, which is very much the intention.
There is intentionally no generic fsl,lynx-10g compatible string due to
the hardware inability to report its capabilities, despite having a
common register map.
We allow both forms of #phy-cells = <1> in the top-level provider
and #phy-cells = <0> in the per-lane provider for more flexibility to
consumers, and because the kernel code is shared with the 28G Lynx which
already has that support for compatibility reasons.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260610151952.2141019-15-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Introduce EcoNet EN7528 SoC compatible in MediaTek PCIe controller
binding.
EcoNet PCIe controller has the same configuration model as
Mediatek v2 but is initialized more similarly to an MT7621
PCIe.
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260521171951.1495781-3-cjd@cjdns.fr
Neither of the two Gen4x4 PHYs found on Purwa supports bifurcation.
The PHY is however physically laid out as if it were to, since there
are two separate ports (A/B).
Split out a new if-then block to un-require the bifurcation register
handle to squash this warning:
purwa-iot-evk.dtb: phy@1bd4000 (qcom,x1p42100-qmp-gen4x4-pcie-phy): 'qcom,4ln-config-sel' is a required property
Fixes: 2e1ffd4c18 ("dt-bindings: phy: qcom,qmp-pcie: Add X1P42100 PCIe Gen4x4 PHY")
Reported-by: Rob Herring <robh@kernel.org>
Closes: https://lore.kernel.org/linux-arm-msm/176857775469.1631885.16133311938753588148.robh@kernel.org/
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260610-topic-purwa_phy_shutup_warning-v2-1-951c1fbfe9b2@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The previous version of the binding change only add compatible
string without adding the fallback compatible, this breaks
backward compatibility. Add the needed fallback compatible to
fix this.
Fixes: be3e2a0419 ("dt-bindings: dma: snps,dw-axi-dmac: Add CV1800B compatible")
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260511063818.463877-2-inochiama@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document the GPI DMA engine on Shikra platform.
It is fully compatible with the GPI DMA engine found on SM6350,
thus using qcom,sm6350-gpi-dma as fallback compatible.
Signed-off-by: Xueyao An <xueyao.an@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Link: https://patch.msgid.link/20260608-shikra-dt-m1-v4-1-2114300594a6@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add documentation for the dma-channel-mask property in the fsl-edma
binding. This property uses an inverted bit definition: bit value 0
indicates the channel is available, while bit value 1 indicates
unavailable.
That was already used widely for i.MX8, i.MX9. Correcting the definition
will break backward compatibility. This reversal only impacts the eDMA
dts node and driver, and doesn't impact DMA consumer. Therefore,
keep the inverted definition.
Also add a note at the top of the binding to highlight this inverted
definition to prevent confusion.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260211-b4-imx95-v2x-v4-1-10852754b267@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
According to Figure 5.1 ("Unified memory map"), the safety register
block is 64 KiB large, just like the non-safety register block.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/364ff570c8a1845fab24bd89557f06c9e406f8de.1781105007.git.geert+renesas@glider.be
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
This is the devicetree schema for Microchip EMC1812/13/14/15/33
Multichannel Low-Voltage Remote Diode Sensor Family. It also
updates the MAINTAINERS file to include the new driver.
EMC1812 has one external remote temperature monitoring channel.
EMC1813 has two external remote temperature monitoring channels.
EMC1814 has three external remote temperature monitoring channels and
channels 2 and 3 support anti parallel diode.
EMC1815 has four external remote temperature monitoring channels and
channels 1/2 and 3/4 support anti parallel diode.
EMC1833 has two external remote temperature monitoring channels and
channels 1 and 2 support anti parallel diode.
Resistance Error Correction is supported on channels 1/2 and 3/4.
Signed-off-by: Marius Cristea <marius.cristea@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260610-hw_mon-emc1812-v11-1-cef809af5c19@microchip.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
'nvmem' unlike 'nvmem-cells', consumes references to just a single
phandle with no arguments (i.e. with 0 cells).
Constrain the schema to enforce that, so that the number of such
single-item entries can then be regulated by IP block-specific YAMLs.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260610-topic-nvmem_schema_warning_fix-v1-1-4029becf13f9@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Run dt-check-style as part of dt_binding_check_one. The recipe wraps
the tool with scripts/jobserver-exec so worker count follows the GNU
make jobserver -- `make -j N dt_binding_check` constrains the checker
to N workers rather than spawning one per CPU.
Default mode (relaxed) is zero-violation on the current tree, so this
does not introduce new warnings into make dt_binding_check. Stricter
rules are available via --mode=strict (eg. for use by checkpatch.pl in
a future series).
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/a14fdbded0acdc4fef1c1278100f2f4c6a93a488.1779908995.git.daniel@makrotopia.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Document common video interface device properties, such as rotation and
orientation.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260531092924.12929-2-clamor95@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Provide an endpoint for binding with the other side of the audio link,
which is achieved via the 'port' property.
Signed-off-by: Diederik de Haas <diederik@cknow-tech.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260607105913.355966-1-diederik@cknow-tech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the Nuvoton NPCM FIU binding to DT schema format.
Document the required control registers and the optional direct-
mapped flash window separately, matching the driver behavior
when the direct mapping is not described.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260609163919.3321228-4-tmaimon77@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Microchip PSE controllers have a dedicated port disable input that like it
name suggest, will disable PoE on all ports.
So, lets document that GPIO.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260607165600.1260210-1-robert.marko@sartura.hr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The FSI on r8a7740 requires the SPU bus/bridge clock to be enabled before
accessing its registers. Without this clock, any register access leads to
a system hang as the FSI block sits behind the SPU bus.
Update the binding to support multiple clocks to properly describe the
hardware clock tree, including:
- SPU bus/bridge clock (spu) for register access.
- CPG DIV6 clocks (icka/b) as functional clock.
- FSI dividers (diva/b) for audio clock generation.
- External clock inputs (xcka/b) provided by the board.
The hardware supports several valid clock configurations. For example,
when both FSIA and FSIB operate as slaves, only the fck and spu clocks
are required. When a port operates as a master, it can use either an
internal clock source (ickx + divx) or an external clock source
(ickx + xckx). Therefore, while fck and spu are mandatory on r8a7740,
the remaining clocks (icka/b, diva/b and xcka/b) are optional and depend
on the selected master/slave configuration and clock source.
Both sh73a0 and r8a7740 define the SPU DIV6 clock control register at
0xe6150084. The binding therefore documents the clocks supported by the
FSI driver for these variants.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260609113836.45079-2-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add device tree compatible string for AST2700 based boards
("aspeed,ast2700-evb" and "aspeed,ast2700") to the Aspeed SoC
board bindings. This allows proper schema validation and
enables support for AST2700 platforms.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20260609-upstream_ast2700-v9-1-f631752f0cb1@aspeedtech.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add minimal device trees for all t8122 / base M3 based devices and some
required new compatibles to the dt-bindings. These are enough to boot
Linux on these devices to a simple serial console but future work is
required to make these machines useful for end users.
Signed-off-by: Sven Peter <sven@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS3vz815OHsEaWy0u9EEX0kKnUe6QUCaiFSMAAKCRBEEX0kKnUe
6ULzAQDG1d3BZ6IKYZRZkCNuQUecKZY/NA/6TdzU1I8eQ3nW7gEAsYeh/OSPD5/+
ZehIZZ7sIqowWzcmGAAXNDJvZBJKCw8=
=mqxb
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=thB1
-----END PGP SIGNATURE-----
Merge tag 'apple-soc-dt-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux into soc/dt
Apple SoC DT update for 7.2
Add minimal device trees for all t8122 / base M3 based devices and some
required new compatibles to the dt-bindings. These are enough to boot
Linux on these devices to a simple serial console but future work is
required to make these machines useful for end users.
Signed-off-by: Sven Peter <sven@kernel.org>
* tag 'apple-soc-dt-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux:
arm64: dts: apple: Initial t8122 (M3) device trees
dt-bindings: arm: apple: Add M3 based devices
dt-bindings: pwm: apple,s5l-fpwm: Add t8122 compatible
dt-bindings: power: apple,pmgr-pwrstate: Add t8122 compatible
dt-bindings: arm: apple: apple,pmgr: Add t8122 compatible
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The LTC4283 is a negative voltage hot swap controller that drives an
external N-channel MOSFET to allow a board to be safely inserted and
removed from a live backplane.
Special note for the "adi,vpower-drns-enable" property. It allows to choose
between the attenuated MOSFET drain voltage or the attenuated input
voltage at the RTNS pin (effectively choosing between input or output
power). This is a system level decision not really intended to change at
runtime and hence is being added as a Firmware property.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20260502-ltc4283-support-v13-1-1c206542e652@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add documentation for the device tree binding of the XDP730 eFuse.
Rename node to efuse to accurately reflect its hardware function.
Signed-off-by: Ashish Yadav <ashish.yadav@infineon.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20260609072231.15486-2-Ashish.Yadav@infineon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The Murata D1U74T-W series are hot-pluggable 1U AC/DC front-end
power supplies in the Intel CRPS-185 / OCP M-CRPS form factor.
Each variant delivers a 12 V main output plus a 12 V standby output
from a wide AC input (90-264 Vac) or HVDC supply, and includes an
internal variable-speed cooling fan and on-board voltage, current,
power, fan-speed, and temperature telemetry.
The host-side digital interface is a PMBus 1.2 port on I2C. The
PSU's other electrical signals (status, alert, current-share) live
on the CRPS edge connector and are consumed by the chassis
controller rather than the host SoC, so there are no host-described
supplies, GPIOs, clocks, or interrupts. Add the compatible to
trivial-devices.yaml rather than carrying a standalone binding file.
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260514-d1u74t-v4-1-1f1ee7b002ec@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The LM75 alert pin is asserted based on the value of alert polarity bit
of the configuration register. The device/driver default is 0 which means
alert pin is configured to be active-low. A value of 1 maps to inverted
(active-high).
Add an optional boolean property "ti,alert-polarity-active-high" to
override the alert pin polarity. When absent, the default active-low
polarity is kept.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20260504151020.462342-2-markus.stockhausen@gmx.de
[groeck: Shorten description line length]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert the ZyXEL NSA320 MCU bindings from text format to YAML schema.
Signed-off-by: Manish Baing <manishbaing2789@gmail.com>
Acked-by: Adam Baker <linux@baker-net.org.uk>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260501102116.8275-1-manishbaing2789@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The EMC2305 fan controller supports multiple independent PWM fan
outputs. Some systems require fans to enter a defined safe state
during system shutdown or reboot handoff, until firmware or the next
boot stage reconfigures the controller.
Add an optional "fan-shutdown-percent" property to fan child nodes
allowing the PWM duty cycle applied during shutdown to be configured
per fan output.
Signed-off-by: Florin Leotescu <florin.leotescu@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20260429065955.2113012-3-florin.leotescu@oss.nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add device tree bindings for the Luxshare LX1308, a high-efficiency
12V 860W DC/DC power module with PMBus interface.
Signed-off-by: Brian Chiang <chiang.brian@inventec.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260428-add-support-lx1308-v2-1-90f115954143@inventec.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
TI K3 TISCI:
- ti_sci: Add BOARDCFG_MANAGED mode for support system suspend/resume cycles
- ti_sci: Add support for restoring IRQ and clock contexts during resume.
- clk: keystone: sci-clk: Add clock restoration support.
SoC Drivers:
- k3-socinfo: Add support for identifying AM62P silicon variants via NVMEM,
along with corresponding dt-bindings update for nvmem-cells support
- k3-ringacc: Fix incorrect access mode for ring pop tail IO/proxy operations
Keystone Navigator (knav) Cleanup and Fixes:
- knav_qmss: Multiple code quality improvements
- knav_qmss_queue: Implement proper resource cleanup in the remove() path
General Cleanups:
- k3-ringacc: Use str_enabled_disabled() helper for consistency
- knav_qmss: Use %pe format specifier for PTR_ERR() printing
-----BEGIN PGP SIGNATURE-----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=JSdI
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Xyhg
-----END PGP SIGNATURE-----
Merge tag 'ti-driver-soc-for-v7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers
TI SoC driver updates for v7.2
TI K3 TISCI:
- ti_sci: Add BOARDCFG_MANAGED mode for support system suspend/resume cycles
- ti_sci: Add support for restoring IRQ and clock contexts during resume.
- clk: keystone: sci-clk: Add clock restoration support.
SoC Drivers:
- k3-socinfo: Add support for identifying AM62P silicon variants via NVMEM,
along with corresponding dt-bindings update for nvmem-cells support
- k3-ringacc: Fix incorrect access mode for ring pop tail IO/proxy operations
Keystone Navigator (knav) Cleanup and Fixes:
- knav_qmss: Multiple code quality improvements
- knav_qmss_queue: Implement proper resource cleanup in the remove() path
General Cleanups:
- k3-ringacc: Use str_enabled_disabled() helper for consistency
- knav_qmss: Use %pe format specifier for PTR_ERR() printing
* tag 'ti-driver-soc-for-v7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
firmware: ti_sci: Add support for restoring clock context during resume
clk: keystone: sci-clk: Add restore_context() operation
firmware: ti_sci: Add support for restoring IRQs during resume
firmware: ti_sci: Add BOARDCFG_MANAGED mode support
soc: ti: k3-ringacc: Use str_enabled_disabled() helper
soc: ti: knav_dma: Use IOMEM_ERR_PTR() in pktdma_get_regs()
soc: ti: knav_dma: Remove dead check on unsigned args.args[0]
soc: ti: knav_dma: Remove unused DMA_PRIO_MASK macro
soc: ti: knav_qmss_acc: Fix kernel-doc Return: tag
soc: ti: knav_qmss: Fix __iomem annotations and __be32 type
soc: ti: knav_qmss: Use %pe to print PTR_ERR()
soc: ti: knav_qmss: Fix kernel-doc Return: tags
soc: ti: knav_qmss: Inline lockdep condition in for_each_handle_rcu
soc: ti: knav_qmss: Rename global kdev to knav_qdev to fix -Wshadow
soc: ti: knav_qmss: Remove remaining redundant ENOMEM printks
soc: ti: knav_qmss_queue: Implement resource cleanup in remove()
soc: ti: k3-ringacc: Fix access mode for k3_ringacc_ring_pop_tail_io/proxy
soc: ti: knav_dma: fix all kernel-doc warnings in knav_dma.h
soc: ti: k3-socinfo: Add support for AM62P variants via NVMEM
dt-bindings: hwinfo: ti,k3-socinfo: Add nvmem-cells support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
An interconnect can be attached to the sun6i-a31-isp device, which is
useful to attach the dma memory offset. Add related properties.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260518153339.619947-3-paulk@sys-base.io
[wens@kernel.org: Corrected sun6i-a31-csi to sun6i-a31-isp in commit log]
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
An interconnect can be attached to the sun6i-a31-csi device, which is
useful to attach the dma memory offset. Add related properties.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260518153339.619947-2-paulk@sys-base.io
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
New platforms:
- Rainiera6 (Meta)
- SanMiguel (Meta)
Updated platforms:
- Anacapa: SGPIO line names and interrupt configuration
- Clemente: Remove TMP421 nodes
- Kommando: Enable networking via MAC2/MDIO2
- SanMiguel: Line names and interrupt configuration
AST2600 SoC updates:
- Describe PWM/Tach
- Describe I3C controllers
- Reorganise I2C nodes
Other notes:
91b9aed738 ("ARM: dts: aspeed-g6: Add nodes for i3c controllers") currently
causes a new warning:
... /ahb/apb/bus@1e7a0000/syscon@0: failed to match any schema with compatible: ['aspeed,ast2600-i3c-global', 'syscon']
The patch necessary to address it has an R-b tag from Kryzsztof[2] but as best
I can tell is yet to be applied to the MFD tree. I've left the change in for now
as the warning will resolve once the binding patch is applied.
Lastly, as part of improving support for the Kommando card Anirudh has also
addressed[1] the persistent pain we've had with the phy-mode property for the
AST2600 MACs. Thanks to Andrew Lunn for being on the case for a while now, and
for those who tested Anirudh's patch.
[1]: https://lore.kernel.org/all/20260525-asus-kommando-v3-0-e6a0ca1b4a3e@gmail.com/
[2]: https://lore.kernel.org/all/20260425-poised-accomplished-hyena-d2c1a0@quoll/
-----BEGIN PGP SIGNATURE-----
iJIEABYKADoWIQSoUT1x3bOSX/nAa8ajM9GZTrjhpgUCah+R1RwcYW5kcmV3QGNv
ZGVjb25zdHJ1Y3QuY29tLmF1AAoJEKMz0ZlOuOGmREgA/jRNiutECMQIXr4y3K33
+c4oHhcUvdGb+xgGCsI6aQ/zAQCrmJet9FHLCcNOnklh1Ob+jpl4U+nMow1lzUn/
2COBCA==
=eDXl
-----END PGP SIGNATURE-----
Merge tag 'aspeed-7.2-devicetree-0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux into soc/dt
aspeed: First batch of ARM devicetree changes for v7.2
New platforms:
- Rainiera6 (Meta)
- SanMiguel (Meta)
Updated platforms:
- Anacapa: SGPIO line names and interrupt configuration
- Clemente: Remove TMP421 nodes
- Kommando: Enable networking via MAC2/MDIO2
- SanMiguel: Line names and interrupt configuration
AST2600 SoC updates:
- Describe PWM/Tach
- Describe I3C controllers
- Reorganise I2C nodes
Other notes:
91b9aed738 ("ARM: dts: aspeed-g6: Add nodes for i3c controllers") currently
causes a new warning:
... /ahb/apb/bus@1e7a0000/syscon@0: failed to match any schema with compatible: ['aspeed,ast2600-i3c-global', 'syscon']
The patch necessary to address it has an R-b tag from Kryzsztof[2] but as best
I can tell is yet to be applied to the MFD tree. I've left the change in for now
as the warning will resolve once the binding patch is applied.
Lastly, as part of improving support for the Kommando card Anirudh has also
addressed[1] the persistent pain we've had with the phy-mode property for the
AST2600 MACs. Thanks to Andrew Lunn for being on the case for a while now, and
for those who tested Anirudh's patch.
[1]: https://lore.kernel.org/all/20260525-asus-kommando-v3-0-e6a0ca1b4a3e@gmail.com/
[2]: https://lore.kernel.org/all/20260425-poised-accomplished-hyena-d2c1a0@quoll/
* tag 'aspeed-7.2-devicetree-0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
ARM: dts: aspeed: sanmiguel: Fix the CPU_CHIPTHROT linename
ARM: dts: aspeed: sanmiguel: Add IOEXP interrupt pin settings
ARM: dts: aspeed: clemente: Remove IOB NIC TMP421 nodes
ARM: dts: aspeed: Enable networking for Asus Kommando IPMI Card
ARM: dts: aspeed: rainiera6: Add Meta Rainiera6 BMC
dt-bindings: arm: aspeed: Add Meta Rainiera6 board
ARM: dts: aspeed: anacapa: Correct SGPIO names for monitoring
ARM: dts: aspeed: Add Meta SanMiguel BMC
dt-bindings: arm: aspeed: add Meta SanMiguel BMC
ARM: dts: aspeed: g6: Add PWM/Tach controller node
ARM: dts: aspeed: yosemite5: Add MP5998 power monitor
ARM: dts: aspeed: anacapa: Add interrupt properties for PDB PCA9555
ARM: dts: aspeed: msx4: enable BMC networking via MAC0
ARM: dts: aspeed: anacapa: Add JTAG CPLD TRST pin to SGPIO map
ARM: dts: aspeed-g6: Add nodes for i3c controllers
ARM: dts: aspeed-g6: move i2c controllers directly into apb node
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Sophgo:
For CV18xx serials:
- Add bindings for Milk-V "Duo S" board.
For SG2042:
- The CPU unit address incorrectly used decimal numbers,
especially for those nodes which value >= 10. Now
corrected to use hexadecimal.
- The MSI controller actually only supports 16 interrupts;
corrected to match the actual situation.
- PCIe RCs are cache-coherent with the CPU. Marked it out
for RC nodes.
For SG2044:
- The same as SG2042, use hex for CPU unit address.
In additional, update Chen Wang's email address for Sopgho
SoC maintainer.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTYPcWJ6By3aFu8IuKHG95Quc97dgUCah/FnAAKCRCHG95Quc97
dhWzAQDU0rJDliEvffHvt4MBpMe5MuK5vgwxEun3YPCjCTzkpQEA6HT6IgHjlibB
SLUn4X8cbJpupgI3czvkxogPNWeZYgE=
=kAeE
-----END PGP SIGNATURE-----
Merge tag 'riscv-sophgo-dt-for-v7.2' of https://github.com/sophgo/linux into soc/dt
RISC-V Devicetrees for v7.2
Sophgo:
For CV18xx serials:
- Add bindings for Milk-V "Duo S" board.
For SG2042:
- The CPU unit address incorrectly used decimal numbers,
especially for those nodes which value >= 10. Now
corrected to use hexadecimal.
- The MSI controller actually only supports 16 interrupts;
corrected to match the actual situation.
- PCIe RCs are cache-coherent with the CPU. Marked it out
for RC nodes.
For SG2044:
- The same as SG2042, use hex for CPU unit address.
In additional, update Chen Wang's email address for Sopgho
SoC maintainer.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* tag 'riscv-sophgo-dt-for-v7.2' of https://github.com/sophgo/linux:
riscv: dts: sophgo: reduce SG2042 MSI count to 16
riscv: dts: sophgo: sg2042: use hex for CPU unit address
riscv: dts: sophgo: sg2044: use hex for CPU unit address
riscv: dts: sophgo: Add dma-coherent to SG2042 PCIe controllers
dt-bindings: soc: sophgo: add sg2000 plic and clint documentation
dt-bindings: soc: sophgo: add Milk-V Duo S board compatibles
MAINTAINERS: update Chen Wang's email address
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add a riscv,pmu node to the Tenstorrent Blackhole SoC device tree. This
enables OpenSBI to expose the SBI PMU extension, allowing Linux perf to
use the 4 programmable counters (mhpmcounter3-6) across 3 event classes:
instruction commit, microarchitectural, and memory system events.
Extend the RISC-V IOMMU device tree bindings to document the Tenstorrent
IOMMU used in the Tenstorrent Atlantis SoC. A second register range is
added which contains M-mode only registers like PMAs and PMPs. The
binding will be used by OpenSBI and potentially other M-mode software.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSy8G7QpEpV9aCf6Lbb7CzD2SixDAUCah4MhgAKCRDb7CzD2Six
DKgDAP93cm8LE7eQTxSWGdgcgWG+tQrb+E/5qcjt8oN4vqOHkQEAw2+Fk1hxvxIz
LvM2xAg+1REKuW3tYJjVfB/m6e9LagE=
=bY/J
-----END PGP SIGNATURE-----
Merge tag 'tenstorrent-dt-for-v7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/tenstorrent/linux into soc/dt
Tenstorrent device tree for v7.2
Add a riscv,pmu node to the Tenstorrent Blackhole SoC device tree. This
enables OpenSBI to expose the SBI PMU extension, allowing Linux perf to
use the 4 programmable counters (mhpmcounter3-6) across 3 event classes:
instruction commit, microarchitectural, and memory system events.
Extend the RISC-V IOMMU device tree bindings to document the Tenstorrent
IOMMU used in the Tenstorrent Atlantis SoC. A second register range is
added which contains M-mode only registers like PMAs and PMPs. The
binding will be used by OpenSBI and potentially other M-mode software.
* tag 'tenstorrent-dt-for-v7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/tenstorrent/linux:
dt-bindings: iommu: riscv: Add bindings for Tenstorrent RISC-V IOMMU
riscv: dts: tenstorrent: Add PMU node to blackhole for Linux perf support
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Mostly changes to the SRAM driver to allow for one SRAM region to be
"claimed" by multiple changes. When a region is "claimed" it is removed
or disconnected from the CPU's view. This is needed on the H6 and H616,
which have one alias region seemingly shared between the video codec
engine and the display engine.
One minor fix for the RSB driver is also included.
-----BEGIN PGP SIGNATURE-----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=n5X7
-----END PGP SIGNATURE-----
Merge tag 'sunxi-drivers-for-7.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/drivers
Allwinner driver changes for 7.2
Mostly changes to the SRAM driver to allow for one SRAM region to be
"claimed" by multiple changes. When a region is "claimed" it is removed
or disconnected from the CPU's view. This is needed on the H6 and H616,
which have one alias region seemingly shared between the video codec
engine and the display engine.
One minor fix for the RSB driver is also included.
* tag 'sunxi-drivers-for-7.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
bus: sunxi-rsb: Always check register address validity
soc: sunxi: sram: Add H616 SRAM regions
soc: sunxi: sram: Support claiming multiple regions per device
soc: sunxi: sram: Allow SRAM to be claimed multiple times
soc: sunxi: sram: Const-ify sunxi_sram_func data and references
dt-bindings: sram: sunxi-sram: Add H616 SRAM regions
dt-bindings: sram: Document Allwinner H616 VE SRAM
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add Shikra compatible consistent with CAMSS CCI interfaces.
It requires only two clocks.
Signed-off-by: Nihal Kumar Gupta <nihal.gupta@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
- Add timer (MTU3) and xSPI FLASH support for the RZ/T2H and RZ/N2H
SoCs and their EVK boards,
- Add PCIe support for the RZ/V2N SoC and the RZ/V2N EVK board,
- Add support for the R-Car M3Le SoC and the Geist development board,
- Specify ethernet PHY reset timings on various R-Car boards,
- Add (more) serial, I2C, DMA, and sound support for the RZ/G3L SoC,
- Add PSCI, Multifunctional Interface (MFIS), and SCMI support for the
R-Car X5H SoC and Ironhide development board,
- Add serial DMA support for the RZ/G2L SoC,
- Add keyboard, I2C, Versa clock, and audio support for the RZ/G3L
SMARC SoM and EVK boards,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCah1IuAAKCRCKwlD9ZEnx
cBZlAQC5g/OyC8m5v5ukI2/nNkQVE2AhvxJ19g11ZNGnnulTXwEAk6aw4+Pu793+
6Sq3KyVKlbtIK24sap/tVFCaqaxK0wI=
=BK85
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v7.2-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v7.2 (take two)
- Add timer (MTU3) and xSPI FLASH support for the RZ/T2H and RZ/N2H
SoCs and their EVK boards,
- Add PCIe support for the RZ/V2N SoC and the RZ/V2N EVK board,
- Add support for the R-Car M3Le SoC and the Geist development board,
- Specify ethernet PHY reset timings on various R-Car boards,
- Add (more) serial, I2C, DMA, and sound support for the RZ/G3L SoC,
- Add PSCI, Multifunctional Interface (MFIS), and SCMI support for the
R-Car X5H SoC and Ironhide development board,
- Add serial DMA support for the RZ/G2L SoC,
- Add keyboard, I2C, Versa clock, and audio support for the RZ/G3L
SMARC SoM and EVK boards,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v7.2-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (56 commits)
arm64: dts: renesas: r9a08g046l48-smarc: Enable audio
arm64: dts: renesas: rzg3l-smarc-som: Enable Versa clock generator
arm64: dts: renesas: r9a08g046l48-smarc: Enable I2C{2,3} devices
arm64: dts: renesas: r9a08g046l48-smarc: Add gpio keys
arm64: dts: renesas: rzt2h-n2h-evk: Enable xSPI nodes
arm64: dts: renesas: r9a09g087: Add xSPI nodes
arm64: dts: renesas: r9a09g077: Add xSPI nodes
arm64: dts: renesas: rzg3e-smarc-som: Sort GMAC pinmux entries
arm64: dts: renesas: r8a779md: Add support for R-Car M3Le R8A779MD Geist
arm64: dts: renesas: r9a07g044: Add DMA properties to serial nodes
arm64: dts: renesas: r9a07g054: Add max-frequency to SDHI nodes
arm64: dts: renesas: r9a07g044: Add max-frequency to SDHI nodes
arm64: dts: renesas: r9a07g043: Add max-frequency to SDHI nodes
arm64: dts: renesas: r9a08g046: Add rsci{0..3} device nodes
arm64: dts: renesas: ironhide: Enable to use SCMI
arm64: dts: renesas: r8a78000: Add MFIS, MFIS-SCP, and transport nodes
arm64: dts: renesas: ironhide: Describe all reserved memory
arm64: dts: renesas: rzt2h-n2h-evk: Configure eMMC/SDHI pins
arm64: dts: renesas: r8a78000: Fix GIC-720AE View 1 Redistributor description
arm64: dts: renesas: r8a78000: Add PSCI node
...
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Document the bindings for the CDSP, LPAICP and MPSS PAS on
the Shikra SoC.
Signed-off-by: Bibek Kumar Patro <bibek.patro@oss.qualcomm.com>
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260521-shikra-rproc-v3-1-2fca0bbe1ad7@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document compatible string for the CDSP Peripheral Authentication
Service on the Hawi SoC, which is compatible with the Qualcomm SM8550
SoC except for the one additional interrupt ("shutdown-ack") and
similar to the Qualcomm Kaanapali SoC, "global_sync_mem" is not
managed by the kernel so it remains unlisted.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260427190614.3679937-2-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document compatible string for the ADSP Peripheral Authentication
Service on the Hawi SoC, which is compatible with the Qualcomm SM8550
ADSP PAS and can fallback to SM8550 except for the one additional
interrupt ("shutdown-ack").
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260427190614.3679937-1-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property 'input-voltage-microvolt' is a typo. Rename it to
'input-threshold-voltage-microvolt' to align with the standard pin
configuration defined in pincfg-node.yaml and parsed by pinconf-generic.c.
Fixes: f6ea7004e9 ("dt-bindings: pinctrl: realtek: Add RTD1625 pinctrl binding")
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The driver for MT6795 pinctrl already supports the slew-rate property.
Add its description to the documentation.
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Document the UFS Controller on the Hawi Platform.
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Palash Kambar <palash.kambar@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260526090956.2340262-3-palash.kambar@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
the 7.2-rc1 merge window:
- New driver for Shikra SoC
- New driver for Nord SoC
- New driver for Hawi SoC including CPU/LLCC bwmon support
- Add missing SDCC nodes for Eliza SoC
- Misc cleanups and fixes.
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEExQ4tCsdmOu34XfMFgNDMCsbYFmMFAmommV8ACgkQgNDMCsbY
FmM7OA/+OMWL+yuI02Q2xEhMYkDF8mFzxw6m7MtmJJI+FwvMXB13gGYJBNKn6G4E
7Vziwj/rgYoXX6FoMocyJEJKCLOOKcWZw4MNy6p64xdJW+2eTpUz1NtEdGpRdWqf
SF1mN8nOCesfLeqzYoaUGx9CDU8iq/B9y6/BlTBTd+1reFuR4WAn0mGRflv25vL3
x6DyzAxJwnbD9vJ1Nrv4s4MV6JlVF0taBdt7O/l//H7pmGa0PgXgikHfqPKrDehw
LdSc5C3VatnANFs/fXynfGvEMiw6dVE4l6viZScNglKBWMlGENe3v+w+EGv4CULj
bSBMwR4y8paeXsZ8As2PSnyWhCEixD/0xnIW+iv/7ez1LDtda8E9nNaChcfYxqLv
CyD4y6/5IGiIts/y0kwKFWd7dRxiGfIalzJCcYErj4idHjdrFAdVy4AkxNNZcuun
wphosVkwIX5Onrq07nTUqzpMv5A6SqdvUCby9Yi3vlhk+Gy4gb2E9ZRMbRGaZf1t
+GOIngotttaUtDQUb+ttcCbLJka6sArWaiJ+Ggc2fIj+enfrvzWzM+dVmte9EQt9
6zPGz96YHtuNQMAXUeTEoZ/tryhD/bvjtajYpYzyHDcA1EabCqo5ItDDuPsHjQj5
xA0F/CMrTxlMtORGoTnookKWgUEbltyIatsY7g7ate3mI5ehVyg=
=M0Qt
-----END PGP SIGNATURE-----
Merge tag 'icc-7.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
This pull request contains the following interconnect updates for
the 7.2-rc1 merge window:
- New driver for Shikra SoC
- New driver for Nord SoC
- New driver for Hawi SoC including CPU/LLCC bwmon support
- Add missing SDCC nodes for Eliza SoC
- Misc cleanups and fixes.
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-7.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: add Hawi interconnect provider driver
dt-bindings: interconnect: qcom: document the RPMh NoC for Hawi SoC
dt-bindings: interconnect: qcom-bwmon: Add Hawi llcc-bwmon compatible
interconnect: qcom: eliza: Add SDCC1 slave node
dt-bindings: interconnect: qcom,eliza-rpmh: Add SDCC1 slave
interconnect: qcom: Restrict drivers per ARM/ARM64
interconnect: qcom: Fix indentation
dt-bindings: interconnect: qcom,sm6115: Restrict children and clocks
dt-bindings: interconnect: qcom,sm6115: Drop incorrect children if:then: block
dt-bindings: interconnect: qcom,sdm660: Disallow clocks when appropriate
interconnect: Move MODULE_DEVICE_TABLE next to the table itself
interconnect: Do not create empty devres on missing interconnects
dt-bindings: interconnect: qcom-bwmon: Add Hawi cpu-bwmon compatible
interconnect: qcom: Add interconnect provider driver for Nord SoC
dt-bindings: interconnect: Document RPMh Network-On-Chip for Qualcomm Nord SoC
interconnect: qcom: add Shikra interconnect provider driver
dt-bindings: interconnect: document the RPM Network-On-Chip interconnect in Shikra SoC
Like many areas of the kernel IIO has seen a lot of new contributors
though in this case that is not all AI driven, but also reflects and annual
surge of student contributions from usp.br. We also have several new
regular reviewers who are helping with the surge (thanks to all our
active reviewers!)
Given there was a lot of cases of similar improvements applied to
different drivers, I have grouped those into a special section (various
drivers) to avoid mass duplication.
New device support
------------------
adi,ad4130
- Add support for AD4129-4, AD4129-8, AD4130-4, AD4131-4 and AD4131-8
after reworking the driver to be suitable for multiple device support.
adi,ad4080
- Support the AD4880 and AD4884 dual-channel parts. Interesting parts
as have two separate data pipelines (including SPI buses interfaces),
but the only current backend IP combines the two so they cannot be
treated as independent devices.
adi,ad5706r
- New driver for this 4 channel current output DAC.
adi,ad4691
- New driver supporting this family of ADCs. Support for AD4691, AD4692,
AD4693 and AD4694 which support either 8 or 16 channels with different
max sampling rates. Feature rich driver including SPI offload support.
adi,ltc2983
- Add support for the ADT7604 in which the same sensor die as the
LTC2984 is used for leak detection (liquid coverage of a sense area).
allwinner,adc
- Support for A523 SoCs. Similar to existing parts but with an additional
clock. Includes adding support for non contiguous channel lookup
for in kernel use (fwnode_xlate callback).
broadcomm,apds9999
- New driver for the APDS9999 Ambient Light, RGB and proximity sensor.
memsic,mmc5983
- New driver for this 3-axis magnetometer.
taos,tsl2772
- Add support for the AVAGO APDS9900 and APDS9901 Ambient Light and
Proximity sensors. which are very similar to existing part with slightly
different integration time choices. Includes removal of driver for these
parts from drivers/misc.
vishay,veml3328
- New driver for this RGB+IR light sensor.
Features
--------
IIO Core
- Support for IEEE 754 floating point values in buffer scan elements.
- Support quaternion axis representation (missing the scaler part)
microchip,mcp4821
- Add configurable gain control
qcom,pm8xxx-xoadc
- Add per channel labels.
st,lsm6dsx
- Support for rotation sensing on the LSM6DSV and LSM6DSV16X using
both floating point and new quaterionaxis rotation modifier.
MAINTAINERS update
------------------
IIO top level entry
- Include Documentation/driver-api/iio/
adi,*
- Top level ADI entry maintainer switch from Lars-Peter Clausen to Nuno Sá
reflecting what has been the reality for some time. Thanks to Lars-Peter
who was very active for many years, but has moved on to other things.
Also add the linux@analog.com email list to ensure we don't get a gap
in future.
- Maintainer updates to reflect Cosmin Tanislav having moved on - thanks
to Marcelo Schmitt for taking these over.
sensiron,scd30
- Replace maintainer (Tomasz Duszynski) with Maxwell Doose.
Cleanups, minor fixes and hardening.
------------------------------------
Documentation
- Add missing powerdown modes to ABI docs.
- Use modern helpers for buffer definition in the examples.
core
- Rework of the handling of timestamps so that the offset is cached at
buffer resize time (during enabling) rather than based on assumption
that relied in the timestamp being last and the largest element and
so always 8 bytes before end of the scan. Underlying problem was
triggered by scans with repeated type elements such as quaternions
with each element more than 2 bytes - Giving a 16 byte+ aligned channel
with result that a following timestamp may be 16 bytes from end of scan,
rather than 8. Note that for the bosch,bno55 a compatibility hack means
that it will duplicate the timestamp putting a second copy at previously
incorrect location.
- Tidy up use of kernel types in buffer code to not use int64_t given all
calls use s64.
various drivers
- Drop unused driver_data in device id tables - includes cleanup of various
drivers that had only one choice where it can be hard coded elsewhere.
- Move to named initializers for many i2c_device_id and platform_device_id
tables (I have no idea how we go into habit of using named initializers
for only a subset of the table types - e.g. of_device_id).
- Make IIO_CHAN_SOFT_TIMESTAMP() macro a compound literal allowing simple
use in various drivers that do dynamic channel definitions. Use it in
all such cases.
- Use dev_err_probe() and local dev variables to tidy up older drivers.
- Switch more drivers to devm_mutex_init() to provide minor debug benefits.
- Reorder code to put MODULE_DEVICE_TABLE() next to the tables.
- Lots of use of cleanup.h magic to improve code flow, often including
related refactors such as introducing helpers.
- Replacement of usleep_range() with fsleep()
- Reduce logging noise where functions either provide their own extensive
reports on error, or where a clear error code is returned to userspace.
- Minor spelling and style fixes (improving bracket usage, not using
__packed etc)
hid-sensors-*
- Drop helpers for setting channel bit masks in favor of a compound
literal at the call site. Also general cleanup of surrounding code.
hid-sensors-magn
- Use u32 rather than bare unsigned for types.
hid-sensors-rotation
- Make sue of ext_scan_type handling for static case rather than duplicate
chan_info structures.
adi,ad3552r
- Use field_get() to replace open coded equivalent.
adi,ad4170
- Switch from switch to table lookup for GPIO modes.
adi,ad5686
- Apply IWYU principal to included a consistent set of headers.
- Deduplicate regmaps for AD5684 and AD5693 as identical.
- Switch from an enum value in driver data and array look up to pointers
to separate structures, improving readabilty and avoiding issues with
0 value when using helpers to deal with different firmware types.
- Add of_match_id table to SPI driver rather than relying on fallback to
spi_device_id table.
- Introduce some helpers for powerdown mask control.
- Add helpers for control sync simplifying a couple of corner cases.
- Docs fixes.
- Add an ops structure to simplify future addition of operations beyond
read and write.
adi,ad7191
- Switch to best practice of using device_property_present() to detect
if an optional property is there rather than error values on querying
the property.
adi,ad7280a
- Use local variables to improve readability of breaking up chan-address.
adi,ad7825
- Cleanup a type mismatch in clamp() call.
adi,ad799x
- Include improvements
- Local dev variable to shorten code lines.
- Cache regulator voltage at probe (these never change in practice)
- Convert to devm for all unwind handling.
adi,ad9832
- Improve include relevance including replacing kernel.h with more specific
headers.
- Simplify some maths.
adi,ad9834
- Improve include relevance including replacing kernel.h with more specific
headers.
adi,adt7316
- Add a comment to avoid future 'fixes' for error handling during the
odd sequence used to flip from I2C mode to SPI mode.
adi,adxl*
- Documentation consistency improvements.
asahi-kasei,ak8975
- Fix missing runtime pm calls for buffered capture.
- Fix missing pm_runtime_put_autosuspend() in an error path that would leave
the device stuck on.
- Close a potential uninitialized kernel stack leak.
- Extensive driver modernization including: header relevance, fsleep()
various minor bugs, dropping duplicate error messages and avoiding
magic lengths for buffers.
- Replace opencoded polling with iopoll().
- Add error checking to gpio reads.
avia,hx711
- Move scale computation from global data to per device avoiding problems
if multiple devices present.
- General binding text cleanup.
bosch,bmg160
- Add missing mount-matrix entry to binding.
bosch,bno55
- Terminate error strings with newlines.
devantech,srf08
- Replace sprintf() with sysfs_emit() and sysfs_emit_at() to make intent
clearer.
freescale,mma8452
- Add missing return value check.
- Fix potential probe ordering issue by switching to non devm irq request.
linear,ltc2309
- Add chip specific read delays.
- Improve chip_info structure, adding __counted_by_ptr marking and
reorganizing to improve packing.
linear,ltc2983
- Fix a firmware combination where default n_wires of 2 bypasses exclusion
of adi,current-rotate whereas explicitly setting it to 2 does not.
- Fix potential race with completion reinit.
- Improve error message wording consistency.
- Use fwnode_property_present() to detect optional properties rather
than fragile return value checking.
microchip,mcp3422
- Use of GENMASK(), FIELD_GET(), FIELD_PREP() to improve readability and
generally modernize driver.
microchip,mcp47feb02
- Fix binding example to use a possible I2C address.
- Fix binding bounds on channel number.
- Standardize binding example indentation
nxp,saradc
- Increase chances of recovering from a failure in the interrupt handler
by notifying the trigger that it can reenable even when the read failed.
- Use field_get() to replace opencoded equivalent.
qualcomm,*
- Standardize on Qualcomm company naming in Kconfig.
richtek,rtq6056
- Add i2c_device_id table for legacy instantiation.
samsung,ssp
- Replace custom timestamp channel macro with main one.
sciosense,ens210
- Now scoped_guard() has been reworked, no need for a return
that can never be reached.
sensiron,scd30
- Constify command lookup table.
- Sanity check for NULL buffer of non zero size being provided to
sc30_i2c_command()
sensortek,stk3310
- Include more appropriate headers.
- Ensure interrupt in appropriate mode after resume.
- Structure definition improvements.
- Use size_of() to replace opencoded sizes.
siliconimage,si1133
- Resolve counter related issues on timeout error paths.
- Unused macro removal, improved macro definitions,.
- Include relevance improvements.
st,lsm6dsx
- Fix an issue with applying invalid data check to wrong type of sample.
taos,tcs3472
- Try to powerdown chip on probe failure.
- Devm usage and dropping of remove() callback.
- Various other minor cleanup.
taos,tsl2591
- Dead code removal.
- Simplify tsl2591_persist functions using a look up table.
ti,ads1298
- Fix wrong comment on timeout (and minor code improvement)
- Drop unnecessary CONFIG2 write during init.
ti,ads7950
- Check ret rather that ret < 0 for spi_setup() call.
- Use fully devm managed resources including moving to
devm_regulator_get_enable_read_voltage() at probe time rather than
querying evey time.
- Using spi_optimize_message() to reduce CPU usage.
ti,ads8688
- User read_avail() callback rather than open coding handling of
available attributes.
ti,opt3001
- Header relevance improvements
- Use GENMASK for field definitions to improve readability.
vishay,vcnl4000
- Switch from enum in device_data to individual names structures
impmroving code readabililty.
- Move to devm handling for remainder of probe.
vishay,veml6030
- Drop pointless read of current Iteration Time index as it is not used.
xilinx,ams
- Fix potential out of bound channel lookup.
- Replace some large switch statements with table lookups.
yamaha,yas530
- Put label in chip info structure to avoid look up in i2c_device_id table.
Drop
----
iio-trig-interrupt.
- Not used for some time and no support for modern firmware bindings or
in kernel users. So drop it.
-----BEGIN PGP SIGNATURE-----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=AW+z
-----END PGP SIGNATURE-----
Merge tag 'iio-for-7.2a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into work-testing
IIO: New device support, features and cleanup for the 7.2 cycle.
Like many areas of the kernel IIO has seen a lot of new contributors
though in this case that is not all AI driven, but also reflects and annual
surge of student contributions from usp.br. We also have several new
regular reviewers who are helping with the surge (thanks to all our
active reviewers!)
Given there was a lot of cases of similar improvements applied to
different drivers, I have grouped those into a special section (various
drivers) to avoid mass duplication.
New device support
------------------
adi,ad4130
- Add support for AD4129-4, AD4129-8, AD4130-4, AD4131-4 and AD4131-8
after reworking the driver to be suitable for multiple device support.
adi,ad4080
- Support the AD4880 and AD4884 dual-channel parts. Interesting parts
as have two separate data pipelines (including SPI buses interfaces),
but the only current backend IP combines the two so they cannot be
treated as independent devices.
adi,ad5706r
- New driver for this 4 channel current output DAC.
adi,ad4691
- New driver supporting this family of ADCs. Support for AD4691, AD4692,
AD4693 and AD4694 which support either 8 or 16 channels with different
max sampling rates. Feature rich driver including SPI offload support.
adi,ltc2983
- Add support for the ADT7604 in which the same sensor die as the
LTC2984 is used for leak detection (liquid coverage of a sense area).
allwinner,adc
- Support for A523 SoCs. Similar to existing parts but with an additional
clock. Includes adding support for non contiguous channel lookup
for in kernel use (fwnode_xlate callback).
broadcomm,apds9999
- New driver for the APDS9999 Ambient Light, RGB and proximity sensor.
memsic,mmc5983
- New driver for this 3-axis magnetometer.
taos,tsl2772
- Add support for the AVAGO APDS9900 and APDS9901 Ambient Light and
Proximity sensors. which are very similar to existing part with slightly
different integration time choices. Includes removal of driver for these
parts from drivers/misc.
vishay,veml3328
- New driver for this RGB+IR light sensor.
Features
--------
IIO Core
- Support for IEEE 754 floating point values in buffer scan elements.
- Support quaternion axis representation (missing the scaler part)
microchip,mcp4821
- Add configurable gain control
qcom,pm8xxx-xoadc
- Add per channel labels.
st,lsm6dsx
- Support for rotation sensing on the LSM6DSV and LSM6DSV16X using
both floating point and new quaterionaxis rotation modifier.
MAINTAINERS update
------------------
IIO top level entry
- Include Documentation/driver-api/iio/
adi,*
- Top level ADI entry maintainer switch from Lars-Peter Clausen to Nuno Sá
reflecting what has been the reality for some time. Thanks to Lars-Peter
who was very active for many years, but has moved on to other things.
Also add the linux@analog.com email list to ensure we don't get a gap
in future.
- Maintainer updates to reflect Cosmin Tanislav having moved on - thanks
to Marcelo Schmitt for taking these over.
sensiron,scd30
- Replace maintainer (Tomasz Duszynski) with Maxwell Doose.
Cleanups, minor fixes and hardening.
------------------------------------
Documentation
- Add missing powerdown modes to ABI docs.
- Use modern helpers for buffer definition in the examples.
core
- Rework of the handling of timestamps so that the offset is cached at
buffer resize time (during enabling) rather than based on assumption
that relied in the timestamp being last and the largest element and
so always 8 bytes before end of the scan. Underlying problem was
triggered by scans with repeated type elements such as quaternions
with each element more than 2 bytes - Giving a 16 byte+ aligned channel
with result that a following timestamp may be 16 bytes from end of scan,
rather than 8. Note that for the bosch,bno55 a compatibility hack means
that it will duplicate the timestamp putting a second copy at previously
incorrect location.
- Tidy up use of kernel types in buffer code to not use int64_t given all
calls use s64.
various drivers
- Drop unused driver_data in device id tables - includes cleanup of various
drivers that had only one choice where it can be hard coded elsewhere.
- Move to named initializers for many i2c_device_id and platform_device_id
tables (I have no idea how we go into habit of using named initializers
for only a subset of the table types - e.g. of_device_id).
- Make IIO_CHAN_SOFT_TIMESTAMP() macro a compound literal allowing simple
use in various drivers that do dynamic channel definitions. Use it in
all such cases.
- Use dev_err_probe() and local dev variables to tidy up older drivers.
- Switch more drivers to devm_mutex_init() to provide minor debug benefits.
- Reorder code to put MODULE_DEVICE_TABLE() next to the tables.
- Lots of use of cleanup.h magic to improve code flow, often including
related refactors such as introducing helpers.
- Replacement of usleep_range() with fsleep()
- Reduce logging noise where functions either provide their own extensive
reports on error, or where a clear error code is returned to userspace.
- Minor spelling and style fixes (improving bracket usage, not using
__packed etc)
hid-sensors-*
- Drop helpers for setting channel bit masks in favor of a compound
literal at the call site. Also general cleanup of surrounding code.
hid-sensors-magn
- Use u32 rather than bare unsigned for types.
hid-sensors-rotation
- Make sue of ext_scan_type handling for static case rather than duplicate
chan_info structures.
adi,ad3552r
- Use field_get() to replace open coded equivalent.
adi,ad4170
- Switch from switch to table lookup for GPIO modes.
adi,ad5686
- Apply IWYU principal to included a consistent set of headers.
- Deduplicate regmaps for AD5684 and AD5693 as identical.
- Switch from an enum value in driver data and array look up to pointers
to separate structures, improving readabilty and avoiding issues with
0 value when using helpers to deal with different firmware types.
- Add of_match_id table to SPI driver rather than relying on fallback to
spi_device_id table.
- Introduce some helpers for powerdown mask control.
- Add helpers for control sync simplifying a couple of corner cases.
- Docs fixes.
- Add an ops structure to simplify future addition of operations beyond
read and write.
adi,ad7191
- Switch to best practice of using device_property_present() to detect
if an optional property is there rather than error values on querying
the property.
adi,ad7280a
- Use local variables to improve readability of breaking up chan-address.
adi,ad7825
- Cleanup a type mismatch in clamp() call.
adi,ad799x
- Include improvements
- Local dev variable to shorten code lines.
- Cache regulator voltage at probe (these never change in practice)
- Convert to devm for all unwind handling.
adi,ad9832
- Improve include relevance including replacing kernel.h with more specific
headers.
- Simplify some maths.
adi,ad9834
- Improve include relevance including replacing kernel.h with more specific
headers.
adi,adt7316
- Add a comment to avoid future 'fixes' for error handling during the
odd sequence used to flip from I2C mode to SPI mode.
adi,adxl*
- Documentation consistency improvements.
asahi-kasei,ak8975
- Fix missing runtime pm calls for buffered capture.
- Fix missing pm_runtime_put_autosuspend() in an error path that would leave
the device stuck on.
- Close a potential uninitialized kernel stack leak.
- Extensive driver modernization including: header relevance, fsleep()
various minor bugs, dropping duplicate error messages and avoiding
magic lengths for buffers.
- Replace opencoded polling with iopoll().
- Add error checking to gpio reads.
avia,hx711
- Move scale computation from global data to per device avoiding problems
if multiple devices present.
- General binding text cleanup.
bosch,bmg160
- Add missing mount-matrix entry to binding.
bosch,bno55
- Terminate error strings with newlines.
devantech,srf08
- Replace sprintf() with sysfs_emit() and sysfs_emit_at() to make intent
clearer.
freescale,mma8452
- Add missing return value check.
- Fix potential probe ordering issue by switching to non devm irq request.
linear,ltc2309
- Add chip specific read delays.
- Improve chip_info structure, adding __counted_by_ptr marking and
reorganizing to improve packing.
linear,ltc2983
- Fix a firmware combination where default n_wires of 2 bypasses exclusion
of adi,current-rotate whereas explicitly setting it to 2 does not.
- Fix potential race with completion reinit.
- Improve error message wording consistency.
- Use fwnode_property_present() to detect optional properties rather
than fragile return value checking.
microchip,mcp3422
- Use of GENMASK(), FIELD_GET(), FIELD_PREP() to improve readability and
generally modernize driver.
microchip,mcp47feb02
- Fix binding example to use a possible I2C address.
- Fix binding bounds on channel number.
- Standardize binding example indentation
nxp,saradc
- Increase chances of recovering from a failure in the interrupt handler
by notifying the trigger that it can reenable even when the read failed.
- Use field_get() to replace opencoded equivalent.
qualcomm,*
- Standardize on Qualcomm company naming in Kconfig.
richtek,rtq6056
- Add i2c_device_id table for legacy instantiation.
samsung,ssp
- Replace custom timestamp channel macro with main one.
sciosense,ens210
- Now scoped_guard() has been reworked, no need for a return
that can never be reached.
sensiron,scd30
- Constify command lookup table.
- Sanity check for NULL buffer of non zero size being provided to
sc30_i2c_command()
sensortek,stk3310
- Include more appropriate headers.
- Ensure interrupt in appropriate mode after resume.
- Structure definition improvements.
- Use size_of() to replace opencoded sizes.
siliconimage,si1133
- Resolve counter related issues on timeout error paths.
- Unused macro removal, improved macro definitions,.
- Include relevance improvements.
st,lsm6dsx
- Fix an issue with applying invalid data check to wrong type of sample.
taos,tcs3472
- Try to powerdown chip on probe failure.
- Devm usage and dropping of remove() callback.
- Various other minor cleanup.
taos,tsl2591
- Dead code removal.
- Simplify tsl2591_persist functions using a look up table.
ti,ads1298
- Fix wrong comment on timeout (and minor code improvement)
- Drop unnecessary CONFIG2 write during init.
ti,ads7950
- Check ret rather that ret < 0 for spi_setup() call.
- Use fully devm managed resources including moving to
devm_regulator_get_enable_read_voltage() at probe time rather than
querying evey time.
- Using spi_optimize_message() to reduce CPU usage.
ti,ads8688
- User read_avail() callback rather than open coding handling of
available attributes.
ti,opt3001
- Header relevance improvements
- Use GENMASK for field definitions to improve readability.
vishay,vcnl4000
- Switch from enum in device_data to individual names structures
impmroving code readabililty.
- Move to devm handling for remainder of probe.
vishay,veml6030
- Drop pointless read of current Iteration Time index as it is not used.
xilinx,ams
- Fix potential out of bound channel lookup.
- Replace some large switch statements with table lookups.
yamaha,yas530
- Put label in chip info structure to avoid look up in i2c_device_id table.
Drop
----
iio-trig-interrupt.
- Not used for some time and no support for modern firmware bindings or
in kernel users. So drop it.
* tag 'iio-for-7.2a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (266 commits)
iio: adc: nxp-sar-adc: harden buffer ISR against per-channel read failure
iio: chemical: scd30: Replace manual locking with RAII locking
iio: light: tsl2591: remove unneeded tsl2591_compatible_als_persist_cycle()
iio: dac: ad5686: create bus ops struct
iio: dac: ad5686: cleanup doc header of local structs
iio: dac: ad5686: add control_sync() for single-channel devices
iio: dac: ad5686: add helpers to handle powerdown masks
iio: dac: ad5686: add of_match table to the spi driver
iio: dac: ad5686: drop enum id
iio: dac: ad5686: remove redundant register definition
iio: dac: ad5686: refactor include headers
iio: adc: ad4080: fix AD4880 chip ID
iio: light: veml3328: add support for new device
dt-bindings: iio: light: veml6030: add veml3328
docs: iio: adc: ad4691: add driver documentation
iio: adc: ad4691: add oversampling support
iio: adc: ad4691: add SPI offload support
iio: adc: ad4691: add triggered buffer support
iio: adc: ad4691: add initial driver for AD4691 family
dt-bindings: iio: adc: add AD4691 family
...
- Wentao fixes use-after-free issue in of-fpga-region
- Phil adds the of matching for Altera ts73xx fpga driver
- Ian adds Efinix FPGA SPI programming driver
- Andy fixes several minor issues for Lattice FPGA driver
- Manish converts dt-bindings to YAML schema for several Altera devices
- Sebastian fixes several minor issues for Intel DFL & Microchip FPGAs
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQSgSJpClIeaArXyudb8twOBpKCM2gUCaiD6nRMceWlsdW4ueHVA
aW50ZWwuY29tAAoJEPy3A4GkoIzaRK0BAL/tryz4yA9F/7hO5gmTT2ke+LfWn/pH
7NmskFCd76svAQDSGvndrW6rquHdoD7A5ZTwY7MRY1NlFdoZCfUfxtt/Ag==
=/REE
-----END PGP SIGNATURE-----
Merge tag 'fpga-for-7.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next
Xu writes:
FPGA Manager changes for 7.2-rc1
- Wentao fixes use-after-free issue in of-fpga-region
- Phil adds the of matching for Altera ts73xx fpga driver
- Ian adds Efinix FPGA SPI programming driver
- Andy fixes several minor issues for Lattice FPGA driver
- Manish converts dt-bindings to YAML schema for several Altera devices
- Sebastian fixes several minor issues for Intel DFL & Microchip FPGAs
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-7.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header()
fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region()
fpga: dfl: add bounds check in dfh_get_param_size()
dt-bindings: fpga: altr,socfpga-fpga-mgr: convert to DT schema
dt-bindings: fpga: altr,a10-pr-ip: convert to DT schema
fpga: lattice-sysconfig-spi: simplify with spi_get_device_match_data()
fpga: lattice-sysconfig-spi: Don't use "proxy" headers
fpga: lattice-sysconfig-spi: Drop of_match_ptr() protection
fpga: lattice-sysconfig-spi: Fix the terminator entries in ID tables
fpga-mgr: Add Efinix SPI programming driver
dt-bindings: fpga: Add Efinix SPI programming bindings
dt-bindings: vendor-prefix: Add prefix for Efinix, Inc.
fpga: ts73xx-fpga: add OF match table for device tree probing
dt-bindings: fpga: Add Technologic Systems TS-7300 FPGA Manager
fpga: region: fix use-after-free in child_regions_with_firmware()
The TAS2573 belongs to the TAS257x device family, featuring an integrated
DSP and IV sensing capability.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260602100532.6463-1-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> says:
SuperH ecovec24/7724se are the last user of Simple Audio Card as
"platform data style". It is mainly supporting "DT style" in these days.
Now, Simple Audio Card "platform data style" is no longer correctly working
during almost this 10 years. but we have not get such report.
Let's remove Sound support from SuperH ecovec24/7724se, and remove
Simple Audio Card platform data style.
Link: https://patch.msgid.link/87zf1le4fu.wl-kuninori.morimoto.gx@renesas.com
Chancel Liu <chancel.liu@nxp.com> says:
This series adds two features to the i.MX RPMSG ASoC card:
1. Headphone jack detection via GPIO: Introduce the "hp-det-gpios"
device tree property and use simple_util_init_jack() to
register a headphone jack with GPIO-based insertion detection.
2. driver_name assignment: Set driver_name on the snd_soc_card to
"imx-audio-rpmsg", enabling userspace tools such as UCM to reliably
identify the card by driver name regardless of the board-specific
card name.
Link: https://patch.msgid.link/20260528020725.2265321-1-chancel.liu@nxp.com
Sound cards using the i.MX RPMSG audio interface may connect a
headphone jack with GPIO-based insertion detection. Add the
"hp-det-gpios" property to the fsl,rpmsg binding to support this
configuration.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://patch.msgid.link/20260528020725.2265321-2-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the xtfpga I2S controller plain-text binding documentation
to standard dt-schema.
The hardware requires exactly one memory region, one interrupt line,
and one phandle to the master clock. Verified these constraints against
the driver source in sound/soc/xtensa/xtfpga-i2s.c.
Also explicitly define the '#sound-dai-cells' property, as it is
required for audio routing but was omitted from the original
text properties list.
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chaitanya Sabnis <chaitanya.msabnis@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260421085635.4490-1-chaitanya.msabnis@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Qualcomm Shikra cpufreq hardware is functionally identical to EPSS,
but supports only up to 12 frequency lookup table (LUT) entries. Introduce
Shikra specific bindings to represent this constrained EPSS variant.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Document an interconnect path for camcc which needs to be enabled so
that the CAMSS_TOP_GDSC power domain can turn on successfully.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260501-milos-camcc-icc-v2-2-bb83c1256cc3@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add X1P42100 camera clock controller support and clock bindings
for camera QDSS debug clocks which are applicable for both X1E80100
and X1P42100 platforms.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260507-purwa-videocc-camcc-v5-2-fc3af4130282@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device tree bindings for the video clock controller on Qualcomm
X1P42100 (Purwa) SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260507-purwa-videocc-camcc-v5-1-fc3af4130282@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
EN7581 and AN7583 SoCs support connecting multiple external SerDes to GDM3
or GDM4 ports via a hw arbiter that manages the traffic in a TDM manner.
As a result multiple net_devices can connect to the same GDM{3,4} port
and there is a theoretical "1:n" relation between GDM ports and
net_devices.
Introduce the ethernet node child of a specific GDM port in order to model
a given net_device that is connected via the external arbiter to the
GDM{3,4} port. This new ethernet node is defined by the "airoha,eth-port"
compatible string. Please note GDM1 and GDM2 does not support the
connection with the external arbiter and they are represented by an
ethernet node defined by the "airoha,eth-mac" compatible string.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260603-airoha-eth-multi-serdes-v9-1-5d476bc2f426@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Document the Samsung SOFEF01-M Display-Driver-IC and 1080x2520@60Hz
command-mode DSI panels found in many Sony phones:
- Sony Xperia 5 (kumano bahamut): amb609tc01
- Sony Xperia 10 II (seine pdx201): ams597ut01
- Sony Xperia 10 III (lena pdx213): ams597ut04
- Sony Xperia 10 IV (murray pdx225): ams597ut05
- Sony Xperia 10 V (zambezi pdx235): ams605dk01
- Sony Xperia 10 VI (columbia pdx246): ams605dk01
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://patch.msgid.link/20251222-drm-panels-sony-v2-4-82a87465d163@somainline.org
[robh: move vci-supply property to top-level]
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Convert the TI OMAP Dynamic Memory Manager (DMM) dt binding
from text format to DT schema.
During conversion following changes were made:
- Move file from /bindings/arm/omap to /bindings/soc/ti/
- Make the 'ti,hwmods' property optional and mark it deprecated as it is
no longer used, it is kept to support legacy dtbs.
- Add the missing required property 'interrupts' to example node.
Signed-off-by: Bhargav Joshi <j.bhargav.u@gmail.com>
Link: https://patch.msgid.link/20260605-ti-omap-dmm-v2-1-1b460742ec83@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add the i.MX95 19x19 FRDM PRO board in the binding document.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Joseph Guo <qijian.guo@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add binding for the SolidRun i.MX8DXL based System on Module, and the
reference HummingBoard Telematics.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
The SolidRun LX2160A Twins board supports two configurations, one with
with a single CEX-7 module, and one with two (dual).
The single configuration is a specific assembly that maximises
connectivity for single cpu by routing some second cpu resources to the
first via zero-Ohm resistors.
The dual configuration was not yet tested and is intentionally omitted.
Initial review strongly suggests that the dual configuration will have
different bindings, because from either cpu point of view the board
appears different (e.g. different number of sfp, fewer i2c gpio).
Add binding for the single variant only.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
The Inline Crypto Engine found in Hawi SoC is compatible with the common
baseline IP 'qcom,inline-crypto-engine'. Hence, document the compatible as
such.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Hawi SoC has the True Random Number Generator (TRNG) which is compatible
with the baseline IP "qcom,trng". Hence, document the compatible as such.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
dsa.txt has been a redirect to dsa.yaml since commit bce58590d1
("dt-bindings: net: dsa: Add DSA yaml binding") introduced the .yaml
schema. The .yaml has the same filename in the same directory, making
this redirect unnecessary for discoverability.
Two files still reference dsa.txt, forcing readers through an extra
hop to reach the .yaml. The stub has not been touched since August
2020. Update references in lan9303.txt and
Documentation/networking/dsa/dsa.rst to point directly to dsa.yaml
and remove the stub.
Signed-off-by: Akash Sukhavasi <akash.sukhavasi@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260603-b4-remove-redirect-stubs-v2-3-c8c19876ab64@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mdio.txt has been a single-line redirect to mdio.yaml since
commit 62d77ff7ec ("dt-bindings: net: Add a YAML schemas for the
generic MDIO options"), which introduced the .yaml schema and reduced
the .txt to a stub in the same change. The .yaml has the same filename
in the same directory, making this redirect unnecessary for
discoverability.
No files in the tree reference mdio.txt and it has not been touched
since June 2019. Remove the obsolete stub.
Signed-off-by: Akash Sukhavasi <akash.sukhavasi@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260603-b4-remove-redirect-stubs-v2-1-c8c19876ab64@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - fix to a fix:
- Bluetooth: MGMT: fix backward compatibility with bluetoothd
which adds stray bytes to MGMT_OP_ADD_EXT_ADV_DATA
Previous releases - regressions:
- af_unix: fix inq_len update inaccuracy on partial read
- eth: fec: fix pinctrl default state restore order on resume
- wifi: iwlwifi: mvm: don't support the reset handshake for old firmwares
- wifi: iwlwifi: pcie: simplify the resume flow if fast resume is
not used, work around NIC access failures
Previous releases - always broken:
- Bluetooth: L2CAP: reject BR/EDR signaling packets over MTUsig
- sctp: fix a couple of bugs in COOKIE_ECHO processing
- sched: fix pedit partial COW leading to page cache corruption
- wifi: nl80211: reject oversized EMA RNR lists
- netfilter: conntrack_irc: fix possible out-of-bounds read
- netfilter: bridge: make ebt_snat ARP rewrite writable
- appletalk: zero-initialize aarp_entry to prevent heap info leak
- ipv4: restrict IPOPT_SSRR and IPOPT_LSRR options
- mptcp: fix number of bugs reported by AI scans and discovered during
NVMe over MPTCP testing
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=zpoM
-----END PGP SIGNATURE-----
Merge tag 'net-7.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter, wireless and Bluetooth.
Current release - fix to a fix:
- Bluetooth: MGMT: fix backward compatibility with bluetoothd
which adds stray bytes to MGMT_OP_ADD_EXT_ADV_DATA
Previous releases - regressions:
- af_unix: fix inq_len update inaccuracy on partial read
- eth: fec: fix pinctrl default state restore order on resume
- wifi: iwlwifi:
- mvm: don't support the reset handshake for old firmwares
- pcie: simplify the resume flow if fast resume is not used,
work around NIC access failures
Previous releases - always broken:
- Bluetooth: L2CAP: reject BR/EDR signaling packets over MTUsig
- sctp: fix a couple of bugs in COOKIE_ECHO processing
- sched: fix pedit partial COW leading to page cache corruption
- wifi: nl80211: reject oversized EMA RNR lists
- netfilter:
- conntrack_irc: fix possible out-of-bounds read
- bridge: make ebt_snat ARP rewrite writable
- appletalk: zero-initialize aarp_entry to prevent heap info leak
- ipv4: restrict IPOPT_SSRR and IPOPT_LSRR options
- mptcp: fix number of bugs reported by AI scans and discovered
during NVMe over MPTCP testing"
* tag 'net-7.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
Reapply "bnxt_en: bring back rtnl_lock() in the bnxt_open() path"
udp: clear skb->dev before running a sockmap verdict
sctp: purge outqueue on stale COOKIE-ECHO handling
bonding: annotate data-races arcound churn variables
net/802/mrp: fix vector attribute parsing in mrp_pdu_parse_vecattr
rtase: Avoid sleeping in get_stats64()
ieee802154: 6lowpan: only accept IPv6 packets in lowpan_xmit()
ipv6: mcast: Fix use-after-free when processing MLD queries
selftests: net: add vxlan vnifilter notification test
vxlan: vnifilter: fix spurious notification on VNI update
vxlan: vnifilter: send notification on VNI add
rtase: Reset TX subqueue when clearing TX ring
octeontx2-af: npc: Fix CPT channel mask in npc_install_flow
dt-bindings: ethernet: eswin: fix hsp-sp-csr backward compatibility
sctp: validate cached peer INIT chunk length in COOKIE_ECHO processing
net/sched: fix pedit partial COW leading to page cache corruption
vsock/vmci: fix sk_ack_backlog leak on failed handshake
net: bonding: fix NULL pointer dereference in bond_do_ioctl()
geneve: fix length used in GRO hint UDP checksum adjustment
net: ethernet: mtk_eth_soc: Fix use-after-free in metadata dst teardown
...
Add the fsl,aipi-bus and fsl,emi-bus compatible strings for i.MX1 and
i.MX2 variants.
These compatibles are only intended for existing legacy chips (more than 15
years old) and will not be used for new device trees.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Document Embedded Controller used in Microsoft Surface RT tablets for
monitoring battery properties and charger status.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260507134608.76222-2-clamor95@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
- dt-bindings updates:
- Document compatible for Agilex5 socdk debug daughter card
- Document compatible for Agilex7-M devkit
- Add support for Agilex7-M devkit
- Remove reg property in the PMU on 32-bit SoCFPGA
- Set i3c alias on Agilex3 and Agilex5
- Update data-width of DMA controller on Agilex5
- Set phy-mode to rgmii on Agilex5
- Increase the JFFS2 rootfs partition on the Arria10 NAND SoCDK
-----BEGIN PGP SIGNATURE-----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=fuTI
-----END PGP SIGNATURE-----
Merge tag 'socfpga_dts_updates_for_v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt
SoCFPGA DTS updates for v7.2
- dt-bindings updates:
- Document compatible for Agilex5 socdk debug daughter card
- Document compatible for Agilex7-M devkit
- Add support for Agilex7-M devkit
- Remove reg property in the PMU on 32-bit SoCFPGA
- Set i3c alias on Agilex3 and Agilex5
- Update data-width of DMA controller on Agilex5
- Set phy-mode to rgmii on Agilex5
- Increase the JFFS2 rootfs partition on the Arria10 NAND SoCDK
* tag 'socfpga_dts_updates_for_v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: dts: socfpga: arria10: Increase JFFS2 rootfs partition size
dt-bindings: altera: add compatible for agilex5 socdk debug daughter card
arm64: dts: socfpga: agilex5: Fix phy-mode to rgmii as HW provides clock delay
arm64: dts: socfpga: agilex5: update data-width for dmac
arm64: dts: socfpga: agilex3: set alias for i3c controller
arm64: dts: socfpga: agilex5: set alias for i3c controllers
ARM: dts: socfpga: remove the reg property in the pmu
arm64: dts: socfpga: agilex7m: Add SoCFPGA Agilex7-M devkit
dt-bindings: arm: altera: document the Agilex7-M devkit
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add iommu-map property to specify separate stream IDs for each DMA
channel. This enables each channel to be in its own IOMMU domain,
keeping memory isolated from other devices sharing the same DMA
controller.
Define the constraints such that if the channel and stream IDs are
contiguous, a single entry can map all the channels, but if the
channels or stream IDs are non-contiguous support multiple entries.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260331102303.33181-4-akhilrajeev@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
On Tegra264, GPCDMA reset control is not exposed to Linux and is handled
by the boot firmware.
Although reset was not exposed in Tegra234 as well, the firmware supported
a dummy reset which just returns success on reset without doing an actual
reset. This is also not supported in Tegra264 BPMP. Therefore mark 'reset'
and 'reset-names' properties as required only for devices prior to
Tegra264.
This also necessitates that the Tegra264 compatible be standalone and
cannot have the fallback compatible of Tegra186. Since there is no
functional impact, we keep reset as required for Tegra234 to avoid
breaking the ABI.
Fixes: bb8c97571d ("dt-bindings: dma: Add Tegra264 compatible string")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260331102303.33181-2-akhilrajeev@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Changes for v7.2
Core:
- Fixed documentation for msm_gem_shrinker functions
- IFPC related enablement/fixes for gen8
- PERFCNTR_CONFIG ioctl support
GPU
- Reworked handling of UBWC configuration
- a810 suppport
MDSS:
- Added Milos platform support
- Reworked handling of UBWC configuration
DisplayPort:
- Reworked HPD handling, preparing for the MST support
DPU:
- Added Milos platform support
- Reworked handling of UBWC configuration
DSI:
- Added Milos platform support
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <rob.clark@oss.qualcomm.com>
Link: https://patch.msgid.link/CACSVV00DXZcvFH2-C3fouve5DGs0DGa-vvsJPuaRmUZZVNKOfg@mail.gmail.com
Add compatible string for the AuxADC block found on the MT6365 PMIC,
that is compatible with the one found in MT6359.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20260429-mediatek-genio-mt6365-cleanup-v1-4-6f43838be92f@collabora.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add compatible string for the pmic keys block found on the MT6365 PMIC,
that is compatible with the one found in MT6359.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20260429-mediatek-genio-mt6365-cleanup-v1-3-6f43838be92f@collabora.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The bulk of this is various improvements for some of the older ASUS and
LG devices, but there's also support for interconnects on Tegra114 to
help improve memory frequency scaling.
-----BEGIN PGP SIGNATURE-----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=yQew
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-7.2-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Device tree changes for v7.2-rc1
The bulk of this is various improvements for some of the older ASUS and
LG devices, but there's also support for interconnects on Tegra114 to
help improve memory frequency scaling.
* tag 'tegra-for-7.2-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: tf600t: Invert accelerometer calibration matrix
ARM: tegra: tf600t: Drop backlight regulator
ARM: tegra: tf600t: Configure panel
ARM: tegra: transformers: Add connector node for common trees
ARM: tegra: transformer: Add support for front camera
ARM: tegra: grouper: Add support for front camera
ARM: tegra: p880: Lower CPU thermal limit
ARM: tegra: lg-x3: Set PMIC's RTC address
ARM: tegra: lg-x3: Complete video device graph
ARM: tegra: Configure Tegra114 power domains
ARM: tegra: Add DC interconnections for Tegra114
ARM: tegra: Add EMC OPP and ICC properties to Tegra114 EMC and ACTMON device-tree nodes
ARM: tegra: Add #{address,size}-cells to Chromium-based /firmware
dt-bindings: memory: Document Tegra114 External Memory Controller
dt-bindings: memory: Document Tegra114 Memory Controller
Signed-off-by: Linus Walleij <linusw@kernel.org>
This adds a compatible string for an upcoming new chip as well as
changes some maintainership information.
-----BEGIN PGP SIGNATURE-----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=RwWK
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-7.2-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Changes for v7.2-rc1
This adds a compatible string for an upcoming new chip as well as
changes some maintainership information.
* tag 'tegra-for-7.2-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: tegra: pmc: Add Tegra238 compatible
dt-bindings: reserved-memory: Change maintainer for BPMP SHMEM
Signed-off-by: Linus Walleij <linusw@kernel.org>
- Add two new devices: the Verbatim Gigabit NAS and the
Raidsonic IB-4210-B, including ACKed binding updates.
- Fix up boot device for the SQ201.
- Use the right LED trigger for disk activity.
- Add the SSP/SPI block to the SoC.
- Fix up the RUT1xx device tree.
-----BEGIN PGP SIGNATURE-----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=RQ6n
-----END PGP SIGNATURE-----
Merge tag 'gemini-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into soc/dt
Gemini device tree updates:
- Add two new devices: the Verbatim Gigabit NAS and the
Raidsonic IB-4210-B, including ACKed binding updates.
- Fix up boot device for the SQ201.
- Use the right LED trigger for disk activity.
- Add the SSP/SPI block to the SoC.
- Fix up the RUT1xx device tree.
* tag 'gemini-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: gemini: Correct the RUT1xx
ARM: dts: Add a Raidsonic IB-4210-B DTS
ARM: dts: Add a Verbatim Gigabit NAS DTS
dt-bindings: arm: Add two missing Gemini devices
dt-bindings: vendor-prefixes: Add Verbatim Corporation
ARM: dts: gemini: Add SSP/SPI block
ARM: dts: gemini: Tag disk led for disk-activity
ARM: dts: gemini: iTian SQ201 need to boot from mtdblock3
Signed-off-by: Linus Walleij <linusw@kernel.org>
Codec CS42448/CS42888 supports multiple control interfaces. At present,
only the I2C interface is implemented. Adding support for the SPI
control interface, operating at up to 6MHz.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260603095041.3906558-2-chancel.liu@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Document the RPM Power Domains on the Shikra Platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Rakesh Kota <rakesh.kota@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Document the RPMh power domain for Nord SoC, and add definitions for
the new power domains present on Nord SoC.
- RPMHPD_NSP3: power domain for the 4th NSP subsystem
- RPMHPD_GFX1: power domain for the 2nd GFX subsystem
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
The arm,arch_timer DT binding is extremely imprecise in describing
the requirements for interrupts.
Follow the architecture by making it explicit that:
- the EL1 secure timer irq is required if EL3 is implemented
- the EL1 physical timer irq is always required
- the EL1 virtual timer irq is always required
- the EL2 physical timer irq is required if EL2 is implemented
- the EL2 virtual timer irq is required if FEAT_VHE is implemented
The consequence of the above is that the minimum number of interrupts
to be described is 2, and not 1.
Finally, clean up the description which made the assumption that
the timers are plugged into a GIC (unfortunately, that's not always
true), drop the MMIO nonsense that has long be moved to a separate
binding, and use the architectural terminology to describe the various
interrupts.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260523140242.586031-5-maz@kernel.org
Extend the thermal cooling device binding to support a 3 cells specifier
along with the 2 cells format.
Update #cooling-cells property to enum to support both 2 and 3 arguments.
Fix pwm-fan.yaml to restrict the number of cells to 'const: 2'
Signed-off-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/20260526140802.1059293-22-daniel.lezcano@oss.qualcomm.com
Add i.MX93 compatible string 'fsl,imx93-tmu' because Thermal monitor
unit(TMU) on i.MX93 has differences with QorIQ platform and not fully
compatible with existing Platform, such as fsl,qoriq-tmu.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20260430-imx93_tmu-v6-1-485459d7b54f@nxp.com
Document the SpacemiT K1 Thermal Sensor, which supports
monitoring temperatures for five zones: soc, package, gpu, cluster0,
and cluster1.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Shuwei Wu <shuwei.wu@mailbox.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.or>
Link: https://patch.msgid.link/20260427-k1-thermal-v5-1-df39187480ed@mailbox.org
Document the Temperature Sensor (TSENS) on the Qualcomm Hawi SoC.
Signed-off-by: Dipa Ramesh Mantre <dipa.mantre@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260512-dtbinding-hawi-v1-1-96149d06cccf@oss.qualcomm.com
Document the Temperature Sensor (TSENS) on the Shikra SoC.
Signed-off-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260513-tsens_binding-v1-1-1780c6a6caf2@oss.qualcomm.com
Supplement dedicated description for each clock in the clocks
property, clarifying the function of each clock input for the
Analogix DP controller binding.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260601065100.1103873-3-damon.ding@rock-chips.com
RK3588 eDP controller requires HCLK_VO1 to access the VO1 GRF
registers and enable the video datapath.
Previously, the clock was enabled implicitly via the 'rockchip,vo-grf'
phandle reference, which allowed the eDP to work without explicitly
managing the hclk_vo1 clock. However, this is not safe or explicit.
To make the clock dependency explicit, enforce per-SoC clock-names
requirements:
- RK3288: 2 clocks (dp, pclk)
- RK3399: 3 clocks (dp, pclk, grf)
- RK3588: 3 clocks (dp, pclk, hclk)
Do not reuse the 'grf' clock name for RK3588 because it represents
a different clock with distinct control logic:
- The 'grf' clock is only for GRF register access and is toggled
dynamically during register access.
- The 'hclk' clock controls both GRF access and video datapath
gating, and must remain enabled during probe.
Fixes: f855146263 ("dt-bindings: display: rockchip: analogix-dp: Add support for RK3588")
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260601065100.1103873-2-damon.ding@rock-chips.com
Certain Samsung S2M series PMICs have a MUIC device which reports
various cable states by measuring the ID-GND resistance with an internal
ADC. Document the devicetree schema for this device.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://patch.msgid.link/20260516-s2mu005-pmic-v7-2-73f9702fb461@disroot.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Following the previous set of fixes, this addresses another significant
number of small issues found in firmware drivers (tee, optee, qcomtee,
qcom ice, exynos acpm) drivers through various tools. This is about
error handling, resource leaks, concurrency and a use-after-free bug.
The fixes for the Qualcomm ICE driver also introduce interface changes
in the UFS and MMC drivers using it.
Outside of firmware drivers, there are a few fixes across the tree:
- Minor driver code mistakes in the Atmel EBI memory controller,
the i.MX soc ID driver and socfpga boot logic
- A defconfig change to avoid a boot time regression on multiple
qualcomm boards
- Device tree fixes for qualcomm, at91 and gemini, addressing
mostly minor configuration mistakes
-----BEGIN PGP SIGNATURE-----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=uqVQ
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Following the previous set of fixes, this addresses another
significant number of small issues found in firmware drivers (tee,
optee, qcomtee, qcom ice, exynos acpm) drivers through various tools.
This is about error handling, resource leaks, concurrency and a
use-after-free bug.
The fixes for the Qualcomm ICE driver also introduce interface changes
in the UFS and MMC drivers using it.
Outside of firmware drivers, there are a few fixes across the tree:
- Minor driver code mistakes in the Atmel EBI memory controller, the
i.MX soc ID driver and socfpga boot logic
- A defconfig change to avoid a boot time regression on multiple
qualcomm boards
- Device tree fixes for qualcomm, at91 and gemini, addressing mostly
minor configuration mistakes"
* tag 'soc-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits)
firmware: samsung: acpm: Fix infinite loop on sequence number exhaustion
firmware: samsung: acpm: Fix missing LKMM barriers in sequence allocator
firmware: samsung: acpm: Fix false timeouts and Use-After-Free in polling
ARM: dts: gemini: Fix partition offsets
ARM: socfpga: Fix OF node refcount leak in SMP setup
soc: qcom: ice: Fix the error code when 'qcom,ice' property is not found
arm64: dts: qcom: eliza: Add power-domain and iface clk for ice node
arm64: dts: qcom: milos: Add power-domain and iface clk for ice node
tee: qcomtee: add missing va_end in early return qcomtee_object_user_init()
tee: fix params_from_user() error path in tee_ioctl_supp_recv
tee: shm: fix shm leak in register_shm_helper()
tee: fix tee_ioctl_object_invoke_arg padding
arm64: defconfig: Enable PCI M.2 power sequencing driver
scsi: ufs: ufs-qcom: Remove NULL check from devm_of_qcom_ice_get()
mmc: sdhci-msm: Remove NULL check from devm_of_qcom_ice_get()
soc: qcom: ice: Return proper error codes from devm_of_qcom_ice_get() instead of NULL
soc: qcom: ice: Return -ENODEV if the ICE platform device is not found
soc: qcom: ice: Fix race between qcom_ice_probe() and of_qcom_ice_get()
ARM: dts: microchip: sam9x7: fix GMAC clock configuration
firmware: samsung: acpm: Fix mailbox channel leak on probe error
...
Previous commit 75949eb026 ("dt-bindings: arm-smmu: Constrain clocks
for newer Qualcomm variants") duplicated constraints for
qcom,sm6350-smmu-500 and qcom,sm6375-smmu-500 - these are already part
of previous "if:" block.
It also missed enforcing one clock for qcom,kaanapali-smmu-500 in GPU
case and missed simultaneously added Shikra and Hawi.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com> says:
this series targets to use named initializers for platform_device_id
arrays. In general these are better readable for humans and more robust
to changes in the respective struct definition.
This robustness is needed as I want to do
Link: https://patch.msgid.link/cover.1779878004.git.u.kleine-koenig@baylibre.com
Introduce the Qualcomm IPQ9650 router/gateway platform and the RDP488
board. Add support for the Motorola Edge 30 and the Nothing Phone.
Describe the IPA block on the Agatti platform and missing OPP-levels for
the video encoder/decoder.
For Eliza, describe the QUP Serial Engines, GPI DMA, SDHCI, LLCC, IMEM,
QCE crypto, ADSP remoteproc and USB nodes. Enable DSI panel,
DisplayPort, USB, and ADSP support on the Eliza MTP.
On Glymur enable ADSP and CDSP remoteprocs, FastRPC, crypto hardware,
CPUfreq cooling devices, and coresight nodes. Enable the remoteprocs and
the LID sensor on the Glymur CRD.
Describe the CAN-FD controller found on the Hamoa EVK. Correct the
DisplayPort controller OPP tables.
Describe the watchdog on IPQ5210 and IPQ9650.
Describe USB controller and PHYs for the Kaanapali platform and enable
basic USB support on the MTP and QRD devices.
Enable the second display subsystem on Lemans and use this to enable
additional DisplayPort outputs on the Lemans Ride board, and IFP
mezzanine for the EVK. Also enable the GPIO expander on the Lemans EVK
to get the CAN signals out.
Add crypto hardware and qfprom nodes on Milos. Reduce the remotefs
shared memory size to avoid sanity checks in the modem firmware
rejecting the region.
Enable the vibrator on FairPhone FP6.
Add GPSDP FastRPC support on Monaco, and describe the Bluetooth
controller on the Arduino VENTUNO Q board.
Introduce an EL2 overlay for the Purwa IoT EVK.
Enable CAN bus controller on QCS6490 RB3gen2 and add a remotefs node.
Enable FastRPC on the SC8280XP ADSP.
Correct SDM630 and SDM660 ADSP FastRPC channel ids. Also add the ADSP
memory region on SDM630.
On SDM845 devices, enable NFC on Google Pixel 3, OnePlus 6, OnePlus 6T,
and SHIFT SHIFT6mq. Enable camera flash on LG devices. Rework the
framebuffer description on Samsung, SHIFT and Xiaomi devices. Enable
camera flash on LG devices. Fix Bluetooth and WiFi on LG and Xiaomi
devices.
Enable MDSS and the display panel on Xiaomi Mi A3.
Scale L3 and DDR clock votes based on CPUfreq selection.
Enable camera clock controller, cpufreq cooling devices, and correct the
DSI1 reference clock on SM8750.
On the Talos platform, describe the QSPI support, GPR and audio
services, and enable sound on the EVK target. Enable QSPI and describe
the SPINOR on this bus, on the QCS615 Ride.
Describe power-domain and iface clock for the Inline Crypto Engine (ICE)
across various platforms.
Fix the Bluetooth RFA supply name across a variety of devices.
-----BEGIN PGP SIGNATURE-----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=+ctB
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v7.2
Introduce the Qualcomm IPQ9650 router/gateway platform and the RDP488
board. Add support for the Motorola Edge 30 and the Nothing Phone.
Describe the IPA block on the Agatti platform and missing OPP-levels for
the video encoder/decoder.
For Eliza, describe the QUP Serial Engines, GPI DMA, SDHCI, LLCC, IMEM,
QCE crypto, ADSP remoteproc and USB nodes. Enable DSI panel,
DisplayPort, USB, and ADSP support on the Eliza MTP.
On Glymur enable ADSP and CDSP remoteprocs, FastRPC, crypto hardware,
CPUfreq cooling devices, and coresight nodes. Enable the remoteprocs and
the LID sensor on the Glymur CRD.
Describe the CAN-FD controller found on the Hamoa EVK. Correct the
DisplayPort controller OPP tables.
Describe the watchdog on IPQ5210 and IPQ9650.
Describe USB controller and PHYs for the Kaanapali platform and enable
basic USB support on the MTP and QRD devices.
Enable the second display subsystem on Lemans and use this to enable
additional DisplayPort outputs on the Lemans Ride board, and IFP
mezzanine for the EVK. Also enable the GPIO expander on the Lemans EVK
to get the CAN signals out.
Add crypto hardware and qfprom nodes on Milos. Reduce the remotefs
shared memory size to avoid sanity checks in the modem firmware
rejecting the region.
Enable the vibrator on FairPhone FP6.
Add GPSDP FastRPC support on Monaco, and describe the Bluetooth
controller on the Arduino VENTUNO Q board.
Introduce an EL2 overlay for the Purwa IoT EVK.
Enable CAN bus controller on QCS6490 RB3gen2 and add a remotefs node.
Enable FastRPC on the SC8280XP ADSP.
Correct SDM630 and SDM660 ADSP FastRPC channel ids. Also add the ADSP
memory region on SDM630.
On SDM845 devices, enable NFC on Google Pixel 3, OnePlus 6, OnePlus 6T,
and SHIFT SHIFT6mq. Enable camera flash on LG devices. Rework the
framebuffer description on Samsung, SHIFT and Xiaomi devices. Enable
camera flash on LG devices. Fix Bluetooth and WiFi on LG and Xiaomi
devices.
Enable MDSS and the display panel on Xiaomi Mi A3.
Scale L3 and DDR clock votes based on CPUfreq selection.
Enable camera clock controller, cpufreq cooling devices, and correct the
DSI1 reference clock on SM8750.
On the Talos platform, describe the QSPI support, GPR and audio
services, and enable sound on the EVK target. Enable QSPI and describe
the SPINOR on this bus, on the QCS615 Ride.
Describe power-domain and iface clock for the Inline Crypto Engine (ICE)
across various platforms.
Fix the Bluetooth RFA supply name across a variety of devices.
* tag 'qcom-arm64-for-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (131 commits)
arm64: dts: qcom: add support for pixel 3a xl with the tianma panel
arm64: dts: qcom: sdm670-google: add common device tree include
arm64: dts: qcom: hamoa-iot-evk: add MCP2518FD CAN on spi18
arm64: dts: qcom: sm8750: allow mode-switch events to reach the QMP Combo PHY
arm64: dts: qcom: sc8280xp: drop unused polling-delay-passive properties
arm64: dts: qcom: ipq5210: add watchdog node
arm64: dts: qcom: sdm845-xiaomi-beryllium: Correct IPA FW path
arm64: dts: qcom: monaco-arduino-monza: Add Bluetooth UART node
arm64: dts: qcom: glymur: Add qfprom efuse node
arm64: dts: qcom: milos: Add qfprom efuse node
arm64: dts: qcom: glymur: add coresight nodes
arm64: dts: qcom: qcs6490-rb3gen2: add rmtfs node
arm64: dts: qcom: lemans-evk: Enable CAN RX via I2C GPIO expander
arm64: dts: qcom: glymur: Fix wrong interrupt number for i2c19
arm64: dts: qcom: Drop unused remoteproc_adsp_glink label
arm64: dts: qcom: lemans: Add eDP ref clock for eDP PHYs
arm64: dts: qcom: sm8750: Add power-domain and iface clk for ice node
arm64: dts: qcom: sm8650: Add power-domain and iface clk for ice node
arm64: dts: qcom: sm8550: Add power-domain and iface clk for ice node
arm64: dts: qcom: sm8450: Add power-domain and iface clk for ice node
...
Signed-off-by: Linus Walleij <linusw@kernel.org>
Document the compatible strings for the sg2000 interrupt
controller and timer.
Signed-off-by: Joshua Milas <josh.milas@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260530173347.33533-4-josh.milas@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Document the compatible strings for the Milk-V Duo S board [1]
which uses the SOPHGO SG2000 SoC.
Link: https://milkv.io/duo-s [1]
Signed-off-by: Joshua Milas <josh.milas@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260530173347.33533-2-josh.milas@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
The jhb100 GMAC still using Synopsys designware GMAC core.
hardware features are similar with jh7100.
Add jhb100 GMAC compatible and reset, interrupts features.
jhb100 dwmac has only one reset signal and one interrupt
line.
jhb100 SGMII interface tx/rx mac clock is split and require to
set clock rate in 10M/100M/1000M speed. So dts need to add a
new rx clock in code, dts and dt binding doc.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260527084108.121416-3-minda.chen@starfivetech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove jh8100 dt-bindings because do not support it now.
StarFive have stopped jh8100 developing and will not release
it outside.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260527084108.121416-2-minda.chen@starfivetech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Apple devices with the t8122 SoC (M3) are very similar to their M1
and M2 predecessors.
Only the 13-inch Macbook Pro is replaced by a 14-inch version based on
the design of the 14-inch Macbook Pro with (M1/M2 Pro/Max). The Mac mini
was not offered with M3.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://patch.msgid.link/20260507-apple-m3-initial-devicetrees-v3-4-ca07c81b5dc7@jannau.net
Signed-off-by: Sven Peter <sven@kernel.org>
The PWM controller on the Apple silicon t8122 (M3) SoC is compatible
with the existing driver. Add "apple,t8122-fpwm" as SoC specific
compatible under "apple,s5l-fpwm" used by the driver.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org>
Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://patch.msgid.link/20260507-apple-m3-initial-devicetrees-v3-3-ca07c81b5dc7@jannau.net
Signed-off-by: Sven Peter <sven@kernel.org>
The device power state management of the PMGR blocks on Apple's t8122
SoC (M3) is compatible with the existing driver.
Add "apple,t8122-pmgr-pwrstate" as SoC specific compatible under the
existing "apple,t8103-pmgr-pwrstate" used by the driver.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://patch.msgid.link/20260507-apple-m3-initial-devicetrees-v3-1-ca07c81b5dc7@jannau.net
Signed-off-by: Sven Peter <sven@kernel.org>
The PMGR blocks on Apple silicon M3 SoCs (t8122) are compatible with the
M1 and M2 predecessors. Add "apple,t8122-pmgr" as M3 specific
compatible.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://patch.msgid.link/20260505-apple-m3-initial-devicetrees-v2-1-b0c2f3519e0e@jannau.net
Signed-off-by: Sven Peter <sven@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmocssAeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGsvMIAIYkDW1HujnkP3/G
SzQuQozH30O8Fpxdo+axRG6DweP2DTW1lD35YPJJsVto0G2BJZVjzsrx8RSgV6uz
DDY+Y0x0/VknMZ4JDrDoWRIyHaVV6p3+NcSHhwrxctQsa8UdEf4aXGaTf91nIBSB
GCX5R2YxxuQSTMZ19F/e+UShnRC5OO0FbCB5xhSnUJX3+eoRe0mcGAQB4DBUKxsx
BZ5DMOmoiEyPFJbdmy11X0epgJ32qgL7HPYLEo44Vcfy/Ot9lrL9b4vKbG+b3N1P
YAZccYH/dlpUuk7piR37H87Ntgz/SZcYbJlx2iAWoNk4tMmfRUO16igar8yFHjSt
FLN2Zx4=
=ufVr
-----END PGP SIGNATURE-----
Merge tag 'v7.1-rc6' into tty-next
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmocssAeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGsvMIAIYkDW1HujnkP3/G
SzQuQozH30O8Fpxdo+axRG6DweP2DTW1lD35YPJJsVto0G2BJZVjzsrx8RSgV6uz
DDY+Y0x0/VknMZ4JDrDoWRIyHaVV6p3+NcSHhwrxctQsa8UdEf4aXGaTf91nIBSB
GCX5R2YxxuQSTMZ19F/e+UShnRC5OO0FbCB5xhSnUJX3+eoRe0mcGAQB4DBUKxsx
BZ5DMOmoiEyPFJbdmy11X0epgJ32qgL7HPYLEo44Vcfy/Ot9lrL9b4vKbG+b3N1P
YAZccYH/dlpUuk7piR37H87Ntgz/SZcYbJlx2iAWoNk4tMmfRUO16igar8yFHjSt
FLN2Zx4=
=ufVr
-----END PGP SIGNATURE-----
Merge tag 'v7.1-rc6' into usb-next
We need the USB and Thunderbolt fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Troy Mitchell <troy.mitchell@linux.spacemit.com> says:
This series adds K3 SoC support for the SpacemiT I2S controller driver.
Patch 1 adds the dt-bindings for the spacemit,k3-i2s compatible. The K3
SoC uses the same I2S IP as K1 but requires additional clocks
(sysclk_div, c_sysclk, c_bclk) that are shared across multiple I2S
controllers.
Patch 2 adds driver support for K3 SoC with additional clocks.
Link: https://patch.msgid.link/20260522-k3-i2s-v3-0-08e3eb811d93@linux.spacemit.com
Add the spacemit,k3-i2s compatible string for the K3 SoC I2S
controller. The K3 I2S IP is the same as K1 but requires additional
clocks: a dedicated sysclk_div clock, along with common_sysclk and
common_bclk which are shared across multiple I2S controllers on K3.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Link: https://patch.msgid.link/20260522-k3-i2s-v3-1-08e3eb811d93@linux.spacemit.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the Technologic Systems TS-4800 watchdog timer bindings
to DT schema.
Signed-off-by: Eduard Bostina <egbostina@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
John Madieu <john.madieu.xa@bp.renesas.com> says:
Add audio support for the Renesas RZ/G3E SoC to the R-Car Sound
driver. The RZ/G3E audio subsystem is based on R-Car Sound IP but
has several differences requiring dedicated handling:
- SSI operates exclusively in BUSIF mode (no PIO)
- 2-4 BUSIF channels per SSI (layout differs from R-Car)
- Separate register regions for SCU, ADG, SSIU, SSI accessed by name
- Per-SSI ADG and SSIF supply clocks
- Dedicated audmapp clock/reset for Audio DMAC peri-peri
- Per-SSI and per-module reset controllers via CPG
- Unprefixed DT sub-node names (ssi, ssiu, src, ...) instead of
rcar_sound,xxx
- Hyphenated indexed clock/reset names (ssi-0, src-0, adg-ssi-0,
audio-clka, ...) instead of the legacy dotted form
Link: https://patch.msgid.link/20260525110230.4014435-1-john.madieu.xa@bp.renesas.com
Add a standalone device tree binding for the Renesas RZ/G3E (R9A09G047)
sound controller.
The RZ/G3E sound IP is based on R-Car Sound but differs in several ways:
- Uses unprefixed sub-node names (ssi, ssiu, src, dvc, mix, ctu) instead
of R-Car's rcar_sound,xxx prefixed names.
- Supports up to 5 DMA controllers per direction, allowing multiple DMA
entries with repeated channel names in SSIU, SRC and DVC sub-nodes.
- Has 47 clocks including per-SSI ADG clocks (adg-ssi-[0-9]), SCU clocks
(scu, scu_x2, scu_supply), SSIF supply clock, AUDMAC peri-peri clock,
and ADG clock.
- Has 14 reset lines including SCU, ADG and AUDMAC peri-peri resets.
- SSI operates exclusively in BUSIF mode.
These differences make the RZ/G3E binding incompatible with the existing
renesas,rsnd.yaml, so it is added as a separate standalone binding with
its own $ref to dai-common.yaml.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20260525110230.4014435-2-john.madieu.xa@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Alexey Charkov <alchark@flipper.net> says:
The Nuvoton NAU8822 codec has four power supply pins: VDDA, VDDB, VDDC
and VDDSPK, which must be online and stable before the device can be
accessed over I2C. On boards where these rails are software-controlled,
probing the codec before the regulators are up results in -ENXIO errors
during register access.
This short series adds optional regulator support to both the device
tree binding and the driver, so platforms that need explicit power
sequencing can describe and enforce it:
Link: https://patch.msgid.link/20260525-nau8822-reg-v2-0-7d37ae393e46@flipper.net
NAU8822 has 4 power supply pins: VDDA, VDDB, VDDC and VDDSPK, which need
to be online and stable before communication with the device is attempted.
List them (as optional) so that device tree users can ensure correct power
sequencing.
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Link: https://patch.msgid.link/20260525-nau8822-reg-v2-1-7d37ae393e46@flipper.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Carlos Song (OSS) <carlos.song@oss.nxp.com> says:
This series fixes two issues in the fsl-lpspi DMA transfer error paths.
Patch 1 replaces the deprecated dmaengine_terminate_all() with
dmaengine_terminate_sync() across all error paths in
fsl_lpspi_dma_transfer().
Patch 2 fixes a missing RX DMA channel termination when TX descriptor
preparation fails. Since the RX channel is already submitted and issued
before the TX descriptor is prepared, returning -EINVAL without
terminating the RX channel leaves it running against buffers that the
SPI core will unmap, potentially causing memory corruption.
Link: https://patch.msgid.link/20260525062357.3191349-1-carlos.song@oss.nxp.com
The Vishay VEML3328 is an RGBCIR light sensor that shares similar
devicetree properties as other existing VEMLxxxx sensors in the
kernel.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmocssAeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGsvMIAIYkDW1HujnkP3/G
SzQuQozH30O8Fpxdo+axRG6DweP2DTW1lD35YPJJsVto0G2BJZVjzsrx8RSgV6uz
DDY+Y0x0/VknMZ4JDrDoWRIyHaVV6p3+NcSHhwrxctQsa8UdEf4aXGaTf91nIBSB
GCX5R2YxxuQSTMZ19F/e+UShnRC5OO0FbCB5xhSnUJX3+eoRe0mcGAQB4DBUKxsx
BZ5DMOmoiEyPFJbdmy11X0epgJ32qgL7HPYLEo44Vcfy/Ot9lrL9b4vKbG+b3N1P
YAZccYH/dlpUuk7piR37H87Ntgz/SZcYbJlx2iAWoNk4tMmfRUO16igar8yFHjSt
FLN2Zx4=
=ufVr
-----END PGP SIGNATURE-----
Merge tag 'v7.1-rc6' into next
Sync up with mainline to pull in a fix to IMS PCU driver and other
enhancements.
Add freescale 2.4 GHz IEEE® 802.15.4/ZigBee mc1323 to fix the below
CHECK_DTBS warnings.
arch/arm/boot/dts/nxp/imx/imx53-smd.dtb: /soc/bus@50000000/spba-bus@50000000/spi@50010000/mc1323@0: failed to match any schema with compatible: ['fsl,mc1323']
Since the i.MX53 platform is more than 20 years old, it is difficult to
find detailed information about how the MC1323 was used on the i.MX53 SMD
board, as the functionality depended on firmware.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260522203810.832631-1-Frank.Li@oss.nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add television encoder (TVE) for legacy i.MX53 (over 15 years) to fix below
DTB_CHECK warnings:
arch/arm/boot/dts/nxp/imx/imx53-ard.dtb: /soc/bus@60000000/tve@63ff0000: failed to match any schema with compatible: ['fsl,imx53-tve']
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260521193734.1496372-1-Frank.Li@oss.nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add DT bindings for the Analog Devices AD4691 family of multichannel
SAR ADCs (AD4691, AD4692, AD4693, AD4694).
The four variants are not compatible with each other: AD4691/AD4692 have
16 analog input channels while AD4693/AD4694 have 8, and AD4691/AD4693
top out at 500 kSPS while AD4692/AD4694 reach 1 MSPS. These differences
in channel count and maximum sample rate require distinct compatible
strings so the driver can select the correct channel configuration and
rate limits.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Radu Sabau <radu.sabau@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add AD4884 compatible string to the AD4080 devicetree binding.
The AD4884 is a dual-channel, 16-bit, 40 MSPS SAR ADC, sharing the same
register map and interface as the AD4080 family. Like the AD4880, it
requires two SPI chip selects and two io-backends for its independent
ADC channels. The AD4884 differs from the AD4880 in resolution (16-bit
vs 20-bit), which requires distinct channel configuration in the driver,
precluding a fallback compatible.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The ADT7604 shares the same die as the LTC2984. It repurposes the
custom RTD sensor type (18) as a copper trace resistance sensor
and the custom thermistor type (27) as a leak detector, and
removes thermocouple, diode and direct ADC sensor types.
Add adi,adt7604 to the compatible list and introduce two new
sensor node types specific to this device:
- copper-trace@: maps to the custom RTD sensor type (18). Two
variants: sub-ohm (< 1 ohm, adi,copper-trace-sub-ohm boolean,
no custom table and excitation current) and standard (> 1 ohm,
required adi,custom-copper-trace table, optional excitation current
defaulting to the datasheet recommended value). Primary output
is resistance in ohms. For > 1 ohm copper traces with a custom table,
the chip also outputs temperature in millidegrees Celsius.
- leak-detector@: maps to the custom thermistor sensor type (27).
Takes a required adi,custom-leak-detector lookup table encoding
resistance (uOhm) against coverage data (%). Two outputs:
resistance in ohms and coverage in percent.
Separate node types are used rather than extending the existing
rtd@ and thermistor@ nodes because adi,custom-rtd is required
for sensor type 18, and several properties (adi,number-of-wires,
adi,rtd-curve, adi,rsense-share, adi,single-ended,
adi,current-rotate) have no meaning for the new sensor types, since
the configuration is hardcoded, and would need to be explicitly
forbidden or ignored in the driver.
allOf conditions are added to restrict thermocouple, diode, direct
ADC and active temperature nodes to non-ADT7604 devices, and to
restrict copper-trace and leak-detector nodes to the ADT7604
(some parts only).
Signed-off-by: Liviu Stan <liviu.stan@analog.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add Device Tree binding for the Broadcom APDS9999 ambient light
and proximity sensor. A separate binding file is used rather
than merging with avago,apds9300.yaml because the APDS9999
has an additional vcsel-supply for the VCSEL.
The APDS9999 features individual R, G, B, and IR channels with
a green channel that uses optical coating to approximate the
human eye spectral response for ALS/lux measurements. Calibrated
RGB color sensing is not yet implemented in the driver.
Signed-off-by: Jose A. Perez de Azpillaga <azpijr@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add support for the GPADC for the Allwinner A523. It differs from the
D1/T113s/R329/T507 by having two clocks.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Michal Piekos <michal.piekos@mmpsystems.pl>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add a Devicetree binding for the MEMSIC MMC5983MA 3-axis
magnetometer.
MMC5983MA is not register-compatible with the existing MEMSIC
magnetometer drivers. It has a different register map, 18-bit output
data format, and I2C/SPI transport support.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Vladislav Kulikov <vlad.kulikov.c@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Tomasz Duszynski is no longer the maintainer of the SCD30 driver.
Replace his entry with mine.
Link: https://lore.kernel.org/linux-iio/20260507172404.80435-1-m32285159@gmail.com/
Signed-off-by: Maxwell Doose <m32285159@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Rewrite the binding description and property text so it describes the
existing HX711 hardware behavior directly instead of documenting old
driver implementation details.
Also clarify that clock-frequency controls the SCK bit-bang timing.
No functional change.
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add a new optional label property for ADC channels to help users
identify each channel when reading values from the sysfs interface.
Signed-off-by: Antony Kurniawan Soemardi <linux@smankusors.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add device tree binding documentation for the Analog Devices
AD5706R 4-channel 16-bit current output digital-to-analog converter.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add support for the AD4880, a dual-channel 20-bit 40MSPS SAR ADC
with integrated fully differential amplifiers (FDA).
The AD4880 has two independent ADC channels, each with its own SPI
configuration interface. This requires:
- Two entries in reg property for primary and secondary channel
chip selects
- Two io-backends entries for the two data channels
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The mount-matrix property supplies a 3x3 matrix that is used
to transform the values from the gyroscope to get vector
values that are relative to the way the sensor has been mounted
on the device. When the property is not specified, the identity
matrix is used.
This change adds mount-matrix as an optional property to the
dt-bindings for the bmg160 gyroscope.
Signed-off-by: Vishwas Rajashekar <vishwas.dev@vrajashkr.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Document the compatible value for the Renesas R-Car M3Le (R8A779MD)
SoC and the Renesas Geist development board. The Renesas M3Le SoC is
a register-compatible variant of the R8A77965 (M3-N) with reduced set
of peripherals. The Geist board is derived from Renesas Salvator-X/XS
boards, with adjustment for the R8A779MD SoC.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20260504144534.43745-5-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Document backward compatibility support for the CS2500 chip, which is a
drop-in replacement for the CS2000 chip.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260504144534.43745-4-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Here is a set of USB fixes and new device ids for 7.1-rc6. Nothing
major in here, just lots of tiny fixes for reported issues found by
users and some older patches found by some scanning tools. Included in
here are:
- typec fixes found by fuzzers that have decided to finally look at
that device interaction path (i.e. before a driver is bound to a
device).
- typec fixes for issues found by users
- thunderbolt driver fixes for reported problems
- cdns3 driver fixes
- dwc3 driver fixes
- new device quirks added
- usb serial driver fixes for broken devices
- other small driver fixes
All of these have been in linux-next for over a week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCahrHyA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymLRgCeN/oLFmGYFHjcJEZ8d0AjKbRS34oAn3r822bO
1mEsGeOojdWNUm4wzu1k
=pf1m
-----END PGP SIGNATURE-----
Merge tag 'usb-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt fixes from Greg KH:
"Here is a set of USB fixes and new device ids for 7.1-rc6. Nothing
major in here, just lots of tiny fixes for reported issues found by
users and some older patches found by some scanning tools. Included in
here are:
- typec fixes found by fuzzers that have decided to finally look at
that device interaction path (i.e. before a driver is bound to a
device)
- typec fixes for issues found by users
- thunderbolt driver fixes for reported problems
- cdns3 driver fixes
- dwc3 driver fixes
- new device quirks added
- usb serial driver fixes for broken devices
- other small driver fixes
All of these have been in linux-next for over a week with no reported
issues"
* tag 'usb-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (54 commits)
USB: serial: cypress_m8: validate interrupt packet headers
USB: serial: safe_serial: fix memory corruption with small endpoint
USB: serial: omninet: fix memory corruption with small endpoint
USB: serial: mxuport: fix memory corruption with small endpoint
USB: serial: cypress_m8: fix memory corruption with small endpoint
USB: cdc-acm: Fix bit overlap and move quirk definitions to header
usb: dwc2: Fix use after free in debug code
usb: chipidea: core: convert ci_role_switch to local variable
usb: gadget: f_fs: serialize DMABUF cancel against request completion
usb: gadget: f_fs: copy only received bytes on short ep0 read
usb: gadget: dummy_hcd: Reject hub port requests for non-existent ports
dt-bindings: usb: Fix EIC7700 USB reset's issue
usbip: vudc: Fix use after free bug in vudc_remove due to race condition
dt-bindings: usb: ti,omap4-musb: Drop duplicate 'usb-phy' property constraints
usb: storage: Add quirks for PNY Elite Portable SSD
USB: quirks: add NO_LPM for Lenovo ThinkPad USB-C Dock Gen2 hub controllers
usb: usbtmc: reject interrupt endpoints with small wMaxPacketSize
usb: usbtmc: check URB actual_length for interrupt-IN notifications
xhci: tegra: Fix ghost USB device on dual-role port unplug
usb: gadget: uvc: hold opts->lock across XU walks in uvc_function_bind
...
The Iris block on SM8350 and SC8280XP is compatible with the Iris
(Venus) on SM8250. Describing in the bindings that the block is Iris v2
and not Venus. Document SM8350 and SC8280XP IP cores, using
qcom,sm8250-venus as a fallback compatible.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Document the new compatible string "qcom,x1p42100-iris".
Unlike SM8550 where the BSE (Bitstream Engine) is clocked implicitly
via vcodec0_core, x1p42100 exposes a dedicated BSE clock vcodec0_bse
that requires explicit enable/disable and frequency configuration.
The SM8550 driver has no knowledge of this clock and therefore cannot
operate x1p42100 hardware correctly.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Add a schema description for the Venus video decoder/encoder IP in
MSM8939.
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
Reviewed-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The Qualcomm SM6115 platform contains the AR50_Lite core similar to the
one found on the QCM2290. Define new platform-specific compatible, while
using QCM2290 as a fallback.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
[bod: Fixed indentation of compats]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Add bindings for Wacom W9002 and two Wacom W9007 variants which can be
found in tablets.
W9002, W9007A LT03, and W9007A V1 differ in the length of the return
message containing coordinates, distance, pressure and button status.
Co-developed-by: Ferass El Hafidi <funderscore@postmarketos.org>
Signed-off-by: Ferass El Hafidi <funderscore@postmarketos.org>
Signed-off-by: Hendrik Noack <hendrik-noack@gmx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260528074818.12151-2-hendrik-noack@gmx.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Enable QSEECOM and with that access to UEFI variables on the Surface Pro
12in laptop.
Refactor the Geni Serial-Engine helper code to allow the serial engine
drivers (such as I2C) to operate on targets where power and performance
is controlled through an SCMI server instead of individual resources in
Linux.
Extend the LLCC driver to support reading its data from a System Cache
Table (SCT) in memory instead of being hard coded per platform in the
driver. Also add support for the Eliza platform.
Add support for the Hawi platform to pd-mapper.
Switch the SMEM driver to track partitions using xarray to handle the
ever growing number of hosts better.
Extend the socinfo driver with knowledge about the Nord, SM7750,
IPQ9650, and Shikra SoCs, as well as PMAU0102, PMC1020H, PMIV0102, and
PMIV0104 PMICs.
Define UBWC 3.1 and add a couple of convenient helpers in the UBWC
library for MDSS and Adreno.
Fix a memory leak in the WCNSS firmware download mechanism.
-----BEGIN PGP SIGNATURE-----
iQJCBAABCgAsFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmoVuSUOHGJqb3JuQGty
eW8uc2UACgkQCx85Pw2ZrcUJoBAAxf+8fFvYZif2gk1wzA01IINQgB5/2gYu9oSW
Ex4YrHF2wV3BlzRjDnoQ9yC9mYyQeAwqy0pHPIEhJrh5pTc7sJLH5P+iXwe0JU2e
GD6WtxRlSswIhDcmoJokSWNkyQxGu540Mh140/Bd0Pb0tMelh76wmzcpY31tzDOa
APmtPCXWOdMGYAJSA5DMUMlKEENBNuD7yg0sYtoNz4+XVv4nsjMviEspyNN/fWHg
UvL7IJPFwiKynsYrohTgFS5spXOR79aR1xPVsujoUVhzV/W0NFXiDgGLZa41QBAJ
lfqmxQiNCZ6I3n2R4X1OULXy9vLZalLiXQzMOJhvPbjXjW1R6jy40f5+W9SZnNSH
Q33nbkpJWG81gN5GeqwdPi1+gDDIMyw4A3+RaqRPJBYkYzG1NU2YD5ZNFpMrfRta
BT0Nzs8wdmMQgHDGXhjuzMC1hrm9b8QOT12GUnm2hcL7DIJsJC2mtLmlrvnQSm8y
3iPDrEhok2GzSXOKs1EkRfennjLG2MM54Bv7WosNJjrQi2FWkwU2OeNavDxkHo4G
JTWwOPFoRysHqmqLr9aIvQGV9lQ2W+57CqnjrbVeMNclJNUm0usZX/i3zX9jCG7R
SGwdslqlE/PqJWjUN8S/+LECI54axJXlp3KE6+m+nkEsOQcYIxwU/PfZiG1vyJu1
0Y22gro=
=mOpO
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=ryJr
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v7.2
Enable QSEECOM and with that access to UEFI variables on the Surface Pro
12in laptop.
Refactor the Geni Serial-Engine helper code to allow the serial engine
drivers (such as I2C) to operate on targets where power and performance
is controlled through an SCMI server instead of individual resources in
Linux.
Extend the LLCC driver to support reading its data from a System Cache
Table (SCT) in memory instead of being hard coded per platform in the
driver. Also add support for the Eliza platform.
Add support for the Hawi platform to pd-mapper.
Switch the SMEM driver to track partitions using xarray to handle the
ever growing number of hosts better.
Extend the socinfo driver with knowledge about the Nord, SM7750,
IPQ9650, and Shikra SoCs, as well as PMAU0102, PMC1020H, PMIV0102, and
PMIV0104 PMICs.
Define UBWC 3.1 and add a couple of convenient helpers in the UBWC
library for MDSS and Adreno.
Fix a memory leak in the WCNSS firmware download mechanism.
* tag 'qcom-drivers-for-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (40 commits)
soc: qcom: geni-se: Introduce helper APIs for performance control
soc: qcom: geni-se: Introduce helper API for attaching power domains
soc: qcom: geni-se: Add resources activation/deactivation helpers
soc: qcom: geni-se: Handle core clk in geni_se_clks_off() and geni_se_clks_on()
soc: qcom: geni-se: Introduce helper API for resource initialization
soc: qcom: geni-se: Add geni_icc_set_bw_ab() function
soc: qcom: geni-se: Refactor geni_icc_get() and make qup-memory ICC path optional
soc: qcom: llcc-qcom: Fix NULL vs IS_ERR() bug in qcom_llcc_get_fw_config()
soc: qcom: llcc-qcom: Add support for Eliza
dt-bindings: cache: qcom,llcc: Document Eliza LLCC block
soc: qcom: ubwc: add helper controlling AMSBC enablement
soc: qcom: ubwc: define helper for MDSS and Adreno drivers
soc: qcom: ubwc: define UBWC 3.1
soc: qcom: socinfo: Add SoC ID for Nord SA8797P
dt-bindings: arm: qcom,ids: Add SoC ID for Nord SA8797P
soc: qcom: socinfo: Add SoC ID for SM7750
dt-bindings: arm: qcom,ids: Add SoC ID for SM7750
soc: qcom: socinfo: Add PMIC PMAU0102
soc: qcom: socinfo: Add PMIV0102 & PMIV0104 PMICs
firmware: qcom: scm: Allow QSEECOM on Surface Pro 12in
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Update dt-binding document for pinctrl of Amlogic A9.
In Amlogic A9 SoC, a bank mux register reuse other banks.
The multiplexed part requires special processing and is
therefore incompatible with the previous SoCs.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The firmware-name property indicates which firmware to load on RPU
during the Linux boot time. It is possible to stop the RPU after boot
and load different firmware and start RPU.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20260527051611.194844-2-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Document the GPU compatible string used for the Adreno 810.
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Patchwork: https://patchwork.freedesktop.org/patch/728804/
Message-ID: <20260528-adreno-810-v7-2-7fe7fdd97fc2@pm.me>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Document Adreno 810 GMU in the dt-binding specification.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Patchwork: https://patchwork.freedesktop.org/patch/728802/
Message-ID: <20260528-adreno-810-v7-1-7fe7fdd97fc2@pm.me>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Adreno X2-185 GPU found in Glymur chipsets belongs to the A8x family.
It features a new slice architecture with 4 slices, significantly higher
bandwidth throughput compared to mobile counterparts, raytracing support,
and the highest GPU Fmax seen so far on an Adreno GPU (1850 Mhz), among
other improvements. Update the dt bindings documentation to describe this
GPU.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/727119/
Message-ID: <20260522-glymur-gpu-dt-v5-2-562c406b210c@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
This is the only Qcom binding that doesn't have 'qcom' prefix in the
bindings name. This doesn't match with the regex in MAINTAINERS file and
the 'get_maintainer.pl' script fails to list the 'linux-arm-msm' list:
Ulf Hansson <ulfh@kernel.org> (maintainer:MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND...)
Rob Herring <robh@kernel.org> (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)
Krzysztof Kozlowski <krzk+dt@kernel.org> (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)
Conor Dooley <conor+dt@kernel.org> (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)
Bjorn Andersson <andersson@kernel.org> (in file)
Konrad Dybcio <konradybcio@kernel.org> (in file)
linux-mmc@vger.kernel.org (open list:MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND...)
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)
linux-kernel@vger.kernel.org (open list)
Hence, rename the binding to include 'qcom' prefix so that the regex
matches correctly.
Reported-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Closes: https://lore.kernel.org/all/20260526151003.p4kn2vek3hpv4gzv@hu-mojha-hyd.qualcomm.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
The above SoCs have only 12 mailboxes and do not have an extra register
space for mailboxes. Everything is contained in the common register
set. In addition to adding these SoCs, the other entries get updated to
enforce 2 register spaces and their specific number of interrupts.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260519075620.4128-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Document the compatible string for the SDHCI controller on the
Eliza platform.
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Document the Shikra-specific SDHCI compatible in the sdhci-msm binding.
Use "qcom,sdhci-msm-v5" as the fallback compatible for the MSM SDHCI v5
controller used on Shikra.
Signed-off-by: Monish Chunara <monish.chunara@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
The SpacemiT K3 CoM260-IFX board combines a 69.6 × 45 mm compute module
with a reference carrier board.
The module integrates up to 32GB LPDDR5 memory, UFS storage, Micro SD
card slot and includes interfaces such as dual MIPI CSI-2 connectors,
M.2 expansion, USB 3.0, Gigabit Ethernet, DisplayPort, and a 40-pin
expansion header.
The carrier board is intended as a general-purpose development platform
for CoM260 module and exposes interfaces for all of storage, display,
networking, and camera connectivity.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260520-02-k3-com260-ifx-v2-1-d55095457cf0@kernel.org
Signed-off-by: Yixun Lan <dlan@kernel.org>
The PMIC arbiter in the Qualcomm Hawi SoC is version v8.5, which
introduces parity and CRC checks for data received from the PMIC,
as well as NACK checks for command sequences except for read.
All other features in PMIC arbiter remain the same as the one in
the Qualcomm Glymur SoC, with the only differences being some
additional error status checks.
Therefore, add a string for "qcom,hawi-spmi-pmic-arb" as a compatible
entry for "qcom,glymur-spmi-pmic-arb".
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The Qualcomm ICE driver suffers from race conditions between probe() and
get() and will in certain cases return the wrong error code, which
results in storage drivers failing to probe. Fix these issues.
Also correct the DeviceTree binding, to ensure that relevant clocks are
described and voted for, to prevent the driver from accessing unclocked
hardware during boot.
-----BEGIN PGP SIGNATURE-----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=QdJR
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=o97B
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-fixes-for-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for v7.1
The Qualcomm ICE driver suffers from race conditions between probe() and
get() and will in certain cases return the wrong error code, which
results in storage drivers failing to probe. Fix these issues.
Also correct the DeviceTree binding, to ensure that relevant clocks are
described and voted for, to prevent the driver from accessing unclocked
hardware during boot.
* tag 'qcom-drivers-fixes-for-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: ice: Fix the error code when 'qcom,ice' property is not found
scsi: ufs: ufs-qcom: Remove NULL check from devm_of_qcom_ice_get()
mmc: sdhci-msm: Remove NULL check from devm_of_qcom_ice_get()
soc: qcom: ice: Return proper error codes from devm_of_qcom_ice_get() instead of NULL
soc: qcom: ice: Return -ENODEV if the ICE platform device is not found
soc: qcom: ice: Fix race between qcom_ice_probe() and of_qcom_ice_get()
soc: qcom: ice: Allow explicit votes on 'iface' clock for ICE
dt-bindings: crypto: qcom,ice: Fix missing power-domain and iface clk
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The PMC found on Tegra238 is similar to the version in earlier chips but
some of the register offsets and bitfields differ, so add a specific
compatible string for this new variant.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Peter sadly passed away a while ago, so change the maintainers for BPMP
SHMEM to Jon and myself.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add DeviceTree bindings to enumerate the wakeup mailbox used in platform
firmware for Intel processors.
x86 platforms commonly boot secondary CPUs using an INIT assert, de-assert
followed by Start-Up IPI messages. The wakeup mailbox can be used when this
mechanism is unavailable.
The wakeup mailbox offers more control to the operating system to boot
secondary CPUs than a spin-table. It allows the reuse of the same wakeup
vector for all CPUs while maintaining control over which CPUs to boot and
when. While it is possible to achieve the same level of control using a
spin-table, it would require specifying a separate `cpu-release-addr` for
each secondary CPU.
The operation and structure of the mailbox are described in the
Multiprocessor Wakeup Structure defined in the ACPI specification. Note
that this structure does not specify how to publish the mailbox to the
operating system (ACPI-based platform firmware uses a separate table). No
ACPI table is needed in DeviceTree-based firmware to enumerate the mailbox.
Nodes that want to refer to the reserved memory usually define
a `memory-region` property. /cpus/cpu* nodes would want to refer to the
mailbox, but they do not have such property defined in the DeviceTree
specification. Moreover, it would imply that there is a memory region per
CPU. Instead, add a `compatible` property that the operating system can use
to discover the mailbox.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Rafael J. Wysocki (Intel) <rafael.j.wysocki@intel.com>
Co-developed-by: Yunhong Jiang <yunhong.jiang@linux.intel.com>
Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Dexuan Cui <dexuan@kernel.org>
Add documentation for the Rockchip RK3588 Video Capture (VICAP) unit. To
that end, make the existing rockchip,rk3568-vicap documentation more
general and introduce variant specific constraints.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Backmerging to get GEM LRU fixes from commit 379e8f1c ("drm/gem: Make
the GEM LRU lock part of drm_device") and other updates from v7.1-rc5.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
This adds the Raidsonic IB-4210-B and the Verbatim
S08V1901-D1 that were missing from the bindings.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Verbatim Corporation has manufactured a few electronics items
over the years.
Link: https://en.wikipedia.org/wiki/Verbatim_(company)
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmoTZAYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGKZ0H/A8Ti79DXqEl4M6V
S1ZYfteuvyWCdygPfY7+CQsxS1EjfmeRXd0213n95jijUoXvAVe7HJ5FuroTltsF
LYqH3CAedeEWMO1rIZjuDs5J1BzWAh7b0/QoanTlAjI1ZL8c3Btj/o//PoQfztiS
HWlN/aCcsZTi9n0ewV9eQM9jdiuhBlpZujfDX90vYurxAB+3K2c1b0UN+Y4/zMXO
83zaDLMYhIh8cEaU52+23H9UpyfrT0B8n6YgqbU4ZBRIbgA1BC4gloT6B7OHFKfq
PAfjAOBfpe43K8lLUyfbkfNohNblLOboiMmekdf+j2y4wqpCO64o6WigCrZtxtHe
9znkJpM=
=H+I9
-----END PGP SIGNATURE-----
Merge v7.1-rc5 into drm-next
Boris Brezillion needs the gem lru fixes 379e8f1ca5 ("drm/gem: Make
the GEM LRU lock part of drm_device") backmerged for drm-misc-next.
That also means we need to sort out the rename conflict in panthor with
the fixup patch from Boris from drm-tip.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Add a new binding to support the Airoha AN8801R Series Gigabit
Ethernet PHY.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://patch.msgid.link/20260526-add-airoha-an8801-support-v5-1-01aea8dee69b@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tegra264 contains three pin controllers. Document their compatible strings
and describe the list of pins and functions that they provide.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Tegra238 contains two pin controllers. Document their compatible strings
and describe the list of pins and functions that they provide.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add the 'nand-randomizer' property to control the data randomizer
feature. This is used to improve data reliability by reducing
cell-to-cell interference.
Depending on the hardware architecture, this property is designed to be
generic and can apply to either the NAND chip's internal randomizer
or the hardware randomizer engine embedded in the NAND host controller.
This property is defined as a uint32 enum (0 or 1) instead of a simple
boolean. This design choice explicitly supports the "not present" case.
If the property is omitted, the driver will not interfere and will leave
the randomizer in its current state (e.g., as already configured by the
bootloader or hardware default).
Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Document the new compatibles used on Meta Rainiera6.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Cheng <neilcheng0417@gmail.com>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Since the QPIC-SPI-NAND flash controller present in ipq5210 is the same
as the one found in ipq9574, document the ipq5210 compatible and with
ipq9574 as the fallback.
Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260514-ipq5210-nand-v1-1-cbdd7492e826@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add dt-bindings for 10.1" TFT LCD module from Ampire Co. Ltd.
as part of panel-simple.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260515082232.1766586-1-dario.binacchi@amarulasolutions.com
Add the amlogic,t7-thermal compatible for the Amlogic T7 thermal sensor.
Unlike existing variants which use a phandle to the ao-secure syscon,
the T7 relies on a secure monitor interface described by a phandle and
a sensor index argument.
The T7 integrates multiple thermal sensors, all accessed through the
same SMC call. The sensor index argument is required to identify which
sensor's calibration data the secure monitor should return, as a single
SM_THERMAL_CALIB_READ command serves all of them.
Introduce the amlogic,secure-monitor property as a phandle-array and
make amlogic,ao-secure or amlogic,secure-monitor conditionally required
depending on the compatible.
Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260424-add-thermal-t7-vim4-v5-1-9040ca36afe2@aliel.fr
The st,stmpe-pwm binding is already covered by the MFD schema
Documentation/devicetree/bindings/mfd/st,stmpe.yaml. Remove the
obsolete and redundant text binding file.
Signed-off-by: Manish Baing <manishbaing2789@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260523173251.72540-3-manishbaing2789@gmail.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
The PWM controller in SpacemiT K3 SoC reuse the same IP as previous K1
generation, while the difference is that one additional bus clock is
added.
Signed-off-by: Yixun Lan <dlan@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260428-03-k3-pwm-drv-v2-1-a532bbe45556@kernel.org
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Troy Mitchell <troy.mitchell@linux.spacemit.com> says:
On some SoCs (e.g. SpacemiT K3), multiple I2S controllers share the
same physical BCLK. When one controller is already streaming, the
others must use hw_params that result in the same BCLK rate, otherwise
the shared clock would be reconfigured and corrupt the active stream.
This series adds framework-level support for this constraint:
Patch 1 adds the dt-bindings for the spacemit,k3-i2s compatible.
The K3 SoC uses the same I2S IP as K1 but requires additional clocks:
a dedicated sysclk_div, along with c_sysclk and c_bclk which are
shared across multiple I2S controllers.
Patch 2 adds a DEFINE_GUARD wrapping snd_soc_card_mutex_lock() and
snd_soc_card_mutex_unlock() so that scope-based locking picks up the
SND_SOC_CARD_CLASS_RUNTIME lockdep subclass.
Patch 3 adds the constraint logic in soc-pcm.c. During PCM open,
every DAI that has a bclk clock pointer gets a hw_rule registered
unconditionally. The rule callback runs at hw_refine time: it scans
the card for an active peer sharing the same physical BCLK (via
clk_is_match()) that has already completed hw_params, then constrains
the current stream's rate to match the established BCLK rate. The
first DAI to complete hw_params is unconstrained; subsequent DAIs
must match. Two modes are supported:
- Default (I2S): BCLK = rate * channels * sample_bits. The rule
derives the valid rate range from the current channel and
sample_bits intervals.
- Explicit ratio (TDM): if the driver sets dai->bclk_ratio
(e.g. slots * slot_width), the rule computes the single valid
rate as active_bclk_rate / bclk_ratio.
This series was prompted by review feedback on the SpacemiT K3 I2S
series, where a vendor-specific fixed-sample-rate property was rejected
in favor of a generic framework solution:
https://lore.kernel.org/all/afFqgF6ZRwYdfUmL@sirena.co.uk/
Link: https://patch.msgid.link/20260522-i2s-same-blk-v4-0-a71a86faaa20@linux.spacemit.com
SoC1 in the AST2700 integrates its own pin controller responsible for
pin multiplexing and pin configuration.
The controller manages various peripheral functions such as eSPI, LPC,
VPI, SD, UART, I2C, I3C, PWM and others through SCU registers.
The binding reuses the standard pinmux and generic pin configuration
schemas and does not introduce custom Devicetree properties.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Neil Armstrong <neil.armstrong@linaro.org> says:
Add support for the SG Micro SGM3804 Single Inductor Dual Output
Buck/Boost Converter used to power LCD panels a provide positive
and negative power rails with configurable voltage and active
discharge function for each output.
The SGM3804 is powered by the enable GPIO pins inputs and only
supports I2C write messages.
In order to add flexibility and simplify the driver, the
regmap cache is enabled and populated with default values
since we can't write registers when the 2 GPIOs are down.
This regulator is used to provide vsn and vsn power to the
Ayaneo Pocket S2 dual-DSI LCD panel.
Link: https://patch.msgid.link/20260522-topic-sm8650-ayaneo-pocket-s2-sgm3804-v5-0-bd6b1c300ecc@linaro.org
Document the SG Micro SGM3804 Single Inductor Dual Output Buck/Boost
Converter used to power LCD panels a provide positive and negative
power rails with configurable voltage and active discharge function
for each output.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260522-topic-sm8650-ayaneo-pocket-s2-sgm3804-v5-1-bd6b1c300ecc@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for MPS mp2985 controller.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Wensheng Wang <wenswang@yeah.net>
Link: https://lore.kernel.org/r/20260414092921.1067735-1-wenswang@yeah.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Document xSPI controller found on the Renesas RZ/T2H and RZ/N2H SoCs.
The xSPI IP on these SoCs is identical to that found on the RZ/G3E SoC.
The RZ/G3E HW manual (Rev.1.15) references bridge channel 1 and its
bits, however the hardware actually supports only a single bridge
channel (channel 0), matching the RZ/T2H design. The references to
channel 1 and its configuration bits will be corrected in a future
revision of the HW manual.
Update clock/reset constraints to handle the SoC differences.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260515115202.1515577-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Extend the binding to cover details specific to the Tenstorrent RISC-V
IOMMU. In particular, a second register range is added which contains
M-privileged registers, e.g., PMAs and PMPs.
The RISC-V spec S-privileged registers remain in the first register
range and are compatible with "riscv,iommu" so the Linux driver does not
notice any difference, but the binding will be used by OpenSBI and
potentially other M-mode software.
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[fustini: fix dt_binding_check errors]
Signed-off-by: Drew Fustini <fustini@kernel.org>
