dt-bindings: leds: Document TI LM3560 Synchronous Boost Flash Driver

Document TI LM3559 and LM3560 Synchronous Boost Flash Driver used for
camera flash LEDs.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260506064847.37795-2-clamor95@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>

Documentation/devicetree/bindings/leds/ti,lm3560.yaml

@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/ti,lm3560.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI LM3560 Synchronous Boost Flash Driver
+
+maintainers:
+  - Svyatoslav Ryhel <clamor95@gmail.com>
+
+description:
+  The LM3560 is a 2-MHz fixed frequency synchronous boost converter with two
+  1000-mA constant current drivers for high-current white LEDs. The dual high-
+  side current sources allow for grounded cathode LED operation and can be
+  tied together for providing flash currents at up to 2 A through a single LED.
+  An adaptive regulation method ensures the current for each LED remains in
+  regulation and maximizes efficiency.
+
+properties:
+  compatible:
+    enum:
+      - ti,lm3559
+      - ti,lm3560
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  enable-gpios:
+    description: GPIO connected to the HWEN pin.
+    maxItems: 1
+
+  vin-supply:
+    description: Supply connected to the IN line.
+
+  flash-max-timeout-us:
+    minimum: 32000
+    maximum: 1024000
+    default: 32000
+
+  ti,peak-current-microamp:
+    description:
+      The LM3560 features 4 selectable current limits 1.6A, 2.3A, 3A, and 3.6A
+      (in case of LM3559 - 1.4A, 2.1A, 2.7A, and 3.2A). When the current limit
+      is reached, the LM3559/LM3560 stops switching for the remainder of the
+      switching cycle.
+
+patternProperties:
+  '^led@[01]$':
+    type: object
+    $ref: /schemas/leds/common.yaml#
+    description: LED control bank nodes.
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description: Control bank selection (0 = bank A, 1 = bank B).
+        maximum: 1
+
+    required:
+      - reg
+      - flash-max-microamp
+      - led-max-microamp
+
+allOf:
+  - $ref: /schemas/leds/common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,lm3559
+    then:
+      properties:
+        ti,peak-current-microamp:
+          enum: [1400000, 2100000, 2700000, 3200000]
+          default: 1400000
+      patternProperties:
+        '^led@[01]$':
+          properties:
+            flash-max-microamp:
+              minimum: 56250
+              maximum: 900000
+            led-max-microamp:
+              minimum: 28125
+              maximum: 225000
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,lm3560
+    then:
+      properties:
+        ti,peak-current-microamp:
+          enum: [1600000, 2300000, 3000000, 3600000]
+          default: 1600000
+      patternProperties:
+        '^led@[01]$':
+          properties:
+            flash-max-microamp:
+              minimum: 62500
+              maximum: 1000000
+            led-max-microamp:
+              minimum: 31250
+              maximum: 250000
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@53 {
+            compatible = "ti,lm3560";
+            reg = <0x53>;
+
+            enable-gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
+            vin-supply = <&vdd_3v3_sys>;
+
+            flash-max-timeout-us = <1024000>;
+            ti,peak-current-microamp = <1600000>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            led@0 {
+                reg = <0>;
+
+                function = LED_FUNCTION_FLASH;
+                color = <LED_COLOR_ID_WHITE>;
+
+                flash-max-microamp = <562500>;
+                led-max-microamp = <156250>;
+            };
+
+            led@1 {
+                reg = <1>;
+
+                function = LED_FUNCTION_FLASH;
+                color = <LED_COLOR_ID_YELLOW>;
+
+                flash-max-microamp = <562500>;
+                led-max-microamp = <156250>;
+            };
+        };
+    };