[Why]
Seamless boot skips MPC init for the active pipe, resulting in stale MPC
rate control state being retained. This will cause issues since other
logic assumes it is disabled (as DCN30 and newer does not need it).
[How]
Disable MPC rate control on ODM pipe update to cover the seamless boot
case.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When sink type is TMDS, PHY programming does not block against pixel
clock greater than 600MHz.
[How]
Based on sink type, block greater than 600MHz phy programming.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To prevent invalid HW programming, streams should be revalidated first
before committing to HW.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 87b7ebc2e1.
A long time ago, we had an issue with the Raven system when it was
connected to two displays: one with DP and another with HDMI. After the
system woke up from suspension, we saw a solid green screen caused by an
underflow generated by bad DCC metadata. To workaround this issue, the
'commit 87b7ebc2e1 ("drm/amd/display: Fix green screen issue after
suspend")' was introduced to disable the DCC for a few frames after in
the resume phase. However, in hindsight, this solution was probably a
workaround at the kernel level for some issues from another part
(probably other driver components or user space). After applying this
patch and trying to reproduce the green issue in a similar hardware
system but using the latest kernel and userspace, we cannot see the
issue, which makes this workaround obsolete and creates extra
unnecessary complexity to the code; for all of this reason, this commit
reverts the original change.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Some fields in struct dc_link_settings and link_training_settings are
not initialized and using them can cause unexpected results.
[HOW]
Initialize struct dc_link_settings and link_training_settings to zero.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Dropping the entirety of dml2_policy_build_synthetic_soc_states exposes
an issue for states that cannot be filled via bbox_overrides and rely on
the default parameters that may or may not be present depending on the
DM.
For amdgpu_dm this results in missing parameters for most of the struct
in higher states:
- sr_exit_time_us
- sr_enter_plus_exit_time_us
- sr_exit_z8_time_us
- sr_enter_plus_exit_z8_time_us
- urgent_latency_pixel_data_only_us
- urgent_latency_pixel_mixed_with_vm_data_us
- urgent_latency_vm_data_only_us
- dram_clock_change_latency_us
- fclk_change_latency_us
- usr_retraining_latency_us
- writeback_latency_us
- urgent_latency_adjustment_fabric_clock_component_us
- urgent_latency_adjustment_fabric_clock_reference_mhz
- dscclk_mhz
- phyclk_mhz
- phyclk_d18_mhz
- phyclk_d32_mhz
- use_ideal_dram_bw_strobe
[How]
Copy from the first state, applying a minimal policy to set max clocks
for SOC independent values.
Then copy the SOC dependent ones from the states modified by
bbox_overrides.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When effective bandwidth from the SoC is enough to perform SubVP
prefetchs, then DF throttling is not required.
[HOW]
Provide SMU the required clocks for which DF throttling is not required.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Older Asics were changed to target new DCN while still needing older
support causing brightness adjustments to fail.
[How]
Reverted the DCN targets on required DCNs
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Iswara Nagulendran <iswara.nagulendran@amd.com>
Signed-off-by: Harry VanZyllDeJong <hvanzyll@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Source --> DP2.1 MST hub --> DP1.4/2.1 monitor
When change from DP1.4 to DP2.1 from monitor manual, modes higher than
4k120 are all cutoff by mode validation. Switch back to DP1.4 gets all
the modes up to 4k240 available to be enabled by dsc passthrough.
[why]
Compared to DP1.4 link from hub to monitor, DP2.1 link has larger
full_pbn value that causes overflow in the process of doing conversion
from pbn to kbps.
[how]
Change the data type accordingly to fit into the data limit during
conversion calculation.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initialize the power state for dc use
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
There is one uninitialized variable in file
dc/hwss/dcn401/dcn401_hwseq.c, which trigger com compile warnings.
[HOW]
Initialize the unininitialized variable.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com>
Signed-off-by: Meera Patel <meera.patel@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Current driver interface does not allow for flexibility in coexistence
of multiple interface versions, so add support for checking minor
interface revisions and providing appropriate programming.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The FAMS2 stream and sub-state have been separated into
2 different commands. Update the cmd function to send
one command each for the stream and sub-state.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use existing swap() function rather than duplicating its implementation.
./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crc.c:185:47-48: WARNING opportunity for swap().
./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crc.c:125:53-54: WARNING opportunity for swap().
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=12335
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for the drm_panic module, which displays a pretty user
friendly message on the screen when a Linux kernel panic occurs.
It doesn't work yet on laptop panels, maybe due to PSR.
Adapted from Jocelyn's original patch to add DC drm_panic
support.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Lu Yao <yaolu@kylinos.cn>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Add a DC helper for panic updates.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Lu Yao <yaolu@kylinos.cn>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
This adds clear_tiling callbacks to the mi structure that
will be used for drm panic support to clear the tiling on
a display. Mem input (mi) is used on DCE based display
IPs.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Lu Yao <yaolu@kylinos.cn>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
This adds clear_tiling callbacks to the hubp structure that
will be used for drm panic support to clear the tiling on
a display. hubp3 support from Jocelyn's original patch
and the rest from me.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Lu Yao <yaolu@kylinos.cn>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
After a connector is added to the drm_mode_config::connector_list, it's
visible to any in-kernel users looking up connectors via the above list.
Make sure that the connector is properly initialized before such
look-ups, by initializing the connector with
drm_connector_dynamic_init() - which doesn't add the connector to the
list - and registering it with drm_connector_dynamic_register() - which
adds the connector to the list - after the initialization is complete.
v2: Fix s/drm_connector_dynamic_register()/drm_connector_dynamic_init()
typo in the commit log.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Wayne Lin <wayne.lin@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211230328.4012496-7-imre.deak@intel.com
Reading access to connector->eld can happen at the same time the
drm_edid_to_eld() updates the data. Take the newly added eld_mutex in
order to protect connector->eld from concurrent access.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241206-drm-connector-eld-mutex-v2-4-c9bce1ee8bea@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
dcn_find_dcfclk_suits_all() last use was removed by 2018's
commit 4fd994c448 ("drm/amd/display: Start using the new pp_smu
interface")
Remove it, and the dcn_find_normalized_clock_vdd_Level helper it used.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mmhubbub_warmup is a field that was only read by the just removed
dc_stream_warmup_writeback() function.
Remove the field and it's initialisers.
It was only ever initialised to a single function value
(dcn30_mmhubbub_warmup) which is called explicitly elsewhere.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dc_stream_warmup_writeback() is unused since it was added in 2019 by
commit 6a652f6d12 ("drm/amd/display: Add warmup escape call support")
Remove it.
Note there is a dcn30 version that's called directly which is kept.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dwb3_set_host_read_rate_control() has been unused since it was added by
commit 8993dee0de ("drm/amd/display: Add DCN3 DWB")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enable_surface_flip_reporting() has been unused since it was added by
commit 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They were named with the incorrect dcn version.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Sun peng Li <sunpeng.li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* Fix some regressions related to IPS2 and PSR Panel Replay
* Bug fixes in DML
* DMCUB debug improvements
* Other refactors and improvements across multiple components
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
The force_ffu_mode flag could be initialized at other place.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Zhongwei <Zhongwei.Zhang@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 8488646966.
In some test environments causes reporting failures for S0i3/S4.
It shouldn't actually block entry provided there's no race with the
last state being updated, but currently suspecting there's an IPS2
check that's no longer being met.
Fixes: 8488646966 ("drm/amd/display: Don't allow IPS2 in D0 for RCG Dynamic")
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 0f5ac8c8e2
Due to a replay regression.
Fixes: 0f5ac8c8e2 ("drm/amd/display: Revised for Replay Pseudo vblank control")
Reviewed-by: Dennis Chan <dennis.chan@amd.com>
Signed-off-by: Gabe Teeger <Gabe.Teeger@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DMColor inaccurately updates color space, bias and scale
destructively in dc_plane_state. This can be resolved by
accurately populating the infos on dc_plane_info where then
translation to plane state can happen as a whole surface update sequence.
[How]
Remove dc_plane_state update in DMColor and update color space,
bias and scale on dc_plane_info.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When using upscaling on certain gpus, some incorrect scaling
calculations would be made causing hangs.
[HOW]
This was fixed by using the resource_build_scaling_params function on these
gpus.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Peterson Guo <peterson.guo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Right now in dml2 mode validation we are calculating UBF parameters for
prefetch calculation for single and dual DPP scenarios. Data structure
to store such values are just 1D arrays, the single DPP values are
overwritten by the dualDPP values, and we end up using dualDPP for
prefetch calculations twice (once in place of singleDPP support check
and again for dual).
This naturally leads to many problems, one of which validating a mode in
"singleDPP" (when we used dual DPP parameters) and sending the singleDPP
parameters to mode programming, if we cannot support then we observe the
corruption as described in the ticket.
[HOW]
UBF values need to have 2d arrays to store values specific to single and
dual DPP states to avoid single DPP values being overwritten. Other
parameters are recorded on a per state basis such as prefetch UBF values
but they are in the same loop used for calculation and at that point its
fine to overwrite them, its not the case for plain UBF values.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previously, the debugfs did a simple dump of the tracebuffer region.
Because the tracebuffer is a ring, it meant that the entries printed may
not be in chronological order if the ring rolled over. This makes
parsing the tracelog cumbersome.
[How]
Since dmcub provides the current entry count, use that to determine
the latest tracelog entry and output the log chronologically.
Also, the fb region size is not accurate of the actual tracebuffer size;
it has been padded to alignment requirements. Use the tracebuffer size
reported by the fw meta_info, if available. If not, a fallback to the
hardcoded default is needed. To make this value available to other .c
files, its define was moved to dmub_srv.h.
Also, print a indicator at the start of the log if rollover occurred.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add check for invalid pixel format, remove unused pixel formats
and clean up some names
Reviewed-by: Navid Assadian <navid.assadian@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Mismatch between mode support and mode programming occurs.
Mode support would calculate higher row vblank than mode programming.
As a result, mode programming fails and hardware isn't properly programmed.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Variables relates to secure display are spreading out within struct
amdgpu_display_manager.
[How]
Encapsulate relevant variables into struct secure_display_context and
adjust relevant affected codes.
Reviewed-by: HaoPing Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Under mst scenario, mst streams are from the same link_enc_hw_inst.
As the result, can't utilize that as the phy index for distinguising
different stream sinks.
[How]
Sort the connectors by:
link_enc_hw_instance->mst tree depth->mst RAD
After sorting the phy index assignment, store connector's relevant info
into dm mapping array. Once need the index, just look up the static
array.
Reviewed-by: HaoPing Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For mst streams under same topology, stream->link->link_enc_hw_inst are the same and
hence can't distinguish the crc window setting.
[How]
Firstly adjust dc_stream_forward_crc_window to accept assignment of phy_id. Follow up
another patch to determine the phy_id at dm layer.
Reviewed-by: HaoPing Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want to avoid unnecessary asserts, one of which is hit in
dcn31_panel_construct when booting on a DCN32 asic that has an eDP
connector on a different DIG than A or B. The DIG-based mapping only
applies when edp0_on_dp1 is supported, therefore the check for valid
eng_id can be moved within the appropriate section of the if statement.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Expose DCN401 HUBP functions for use across other platforms.
[Description]
This change aims to make the DCN401 HUBP functions accessible for
enabling their use in future platform developments.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[HOW&WHY]
Stores DMUB support for enablement of Varibright over VABC in DCN32
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Iswara Nagulendran <iswara.nagulendran@amd.com>
Signed-off-by: Harry VanZyllDeJong <hvanzyll@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some of the firmware that is loaded by amdgpu is not actually required.
For example the ISP firmware on some SoCs is optional, and if it's not
present the ISP IP block just won't be initialized.
The firmware loader core however will show a warning when this happens
like this:
```
Direct firmware load for amdgpu/isp_4_1_0.bin failed with error -2
```
To avoid confusion for non-required firmware, adjust the amd-ucode helper
to take an extra argument indicating if the firmware is required or
optional.
On optional firmware use firmware_request_nowarn() instead of
request_firmware() to avoid the warnings.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/amd-gfx/df71d375-7abd-4b32-97ce-15e57846eed8@amd.com/T/#t
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
v and h tap calculations slightly different
Use h tap calculation for both v and h tap
Reviewed-by: Navid Assadian <navid.assadian@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move DP tunneling field DPCD reading after all other RX caps are read.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Cruise <Cruise.Hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When using a sw cursor and flip immediate, the plane that is flipping
immediately will do partial updates causing tearing.
When on certain displays, subvp is expected based on
timings but should be disabled in specific use cases that are not
accounted for.
[HOW]
This was fixed by improving the timings check by using the hw cursor
required flag to cover the unaccounted use cases.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Peterson <peterson.guo@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The existing changes to the DPMS off flag should help reduce
accidental entry, but this change further restricts the entry condition.
[How]
Record last power state as sent to DMUB.
Don't send IPS2 allow if it's D0.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Soft hang/lag observed during 10bit playback + moving cursor, corruption
observed in other tickets for same reason, also failing MPO.
1. Currently, we are always running
calculate_lowest_supported_state_for_temp_read which is only
necessary on dGPU
2. Fast validate path does not apply DET buffer allocation policy
3. Prefetch UrgBFactor chroma parameter not populated in prefetch
calculation
[HOW]
1. Add a check to see if we are on APU, if so, skip the code
2. Add det buffer alloc policy checks to fast validate path
3. Populate UrgentBurstChroma param in call to calculate
UrgBChroma prefetch values
-revision commits: small formatting/brackets/null check addition + remove test change + dGPU code
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
driver got wrong clock table due to miss match dtm_table headers.
correct the dtn_clock table based on pmfw header.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Add hblank borrowing support
- Limit VTotal range to max hw cap minus fp
- Correct prefetch calculation
- Add option to retrieve detile buffer size
- Add support for custom recout_width in SPL
- Add disable_ips_in_dpms_off flag for IPS
- Enable EASF based on luma taps only
- Add a left edge pixel if in YCbCr422 or YCbCr420 and odm
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Add support for custom recout_width for mpc combine in SPL
[HOW]
1. Rename mpc_combine_h and mpc_combine_v
2. Add flag use_recout_width_aligned to use custom recout_width
3. Create union to use either mpc_num_h_slices or mpc_recout_width_align
Reviewed-by: Navid Assadian <navid.assadian@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
It's possible we still allow IPS2 when all streams are DPMS off but this
is unexpected.
[HOW]
Pass the DM config value into DC so it can use the pure stream count
to decide. We will be in 0 streams for S0i3 so this will still allow
it for D3.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
EASF only applies to luma. Previously both luma and chroma taps
were checked to determine whether to enable EASF.
[HOW]
Only check if luma taps are supported before determining whether
to enable EASF or not.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pass ip_block instead of adev in set_clockgating_state() callback
functions. Modify set_clockgating_state()for all correspoding ip blocks.
v2: remove all changes for is_idle(), remove type casting
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pass ip_block instead of adev in set_powergating_state callback function.
Modify set_powergating_state ip functions for all correspoding ip blocks.
v2: fix a ip block index error.
v3: remove type casting
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The v6.13-rc2 release included a bunch of breaking changes,
specifically the MODULE_IMPORT_NS commit.
Backmerge in order to fix them before the next pull-request.
Include the fix from Stephen Roswell.
Caused by commit
25c3fd1183 ("drm/virtio: Add a helper to map and note the dma addrs and lengths")
Interacting with commit
cdd30ebb1b ("module: Convert symbol namespace to string literal")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20241209121717.2abe8026@canb.auug.org.au
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
[WHY]
Some DSC timing failed at bandwidth validation due to hactive
can't be evenly divided on each ODM segment.
[HOW]
Borrow from hblank to increase hactive to support these timing.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Hardware does not support the VTotal to be between fp2 lines of the
maximum possible VTotal, so add a capability flag to track it and apply
where necessary.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The minimum value of the dst_y_prefetch_equ was not correct
in prefetch calculation whice causes OPTC underflow.
[HOW]
Add the min operation of dst_y_prefetch_equ in prefetch calculation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Lo-an Chen <lo-an.chen@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
For better power profiling knowing the detile
buffer size at a given point in time
would be useful.
[HOW]
Add interface to retrieve detile buffer from
dc state.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Sung Lee <Sung.Lee@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
On some cards when odm is used, the monitor will have 2 separate pipes
split vertically. When compression is used on the YCbCr colour space on
the second pipe to have correct colours, we need to read a pixel from the
end of first pipe to accurately display colours. Hardware was programmed
properly to account for this extra pixel but it was not calculated
properly in software causing a split screen on some monitors.
[HOW]
The fix adjusts the second pipe's viewport and timings if the pixel
encoding is YCbCr422 or YCbCr420.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: George Shen <george.shen@amd.com>
Signed-off-by: Peterson Guo <peterson.guo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
commit 38077562e0 ("drm/amd/display: Implement new
backlight_level_params structure") adjusted DC core to require
the backlight type to be programmed in the dc link when changing
brightness. This isn't initialized in amdgpu_dm for OLED panels
though which broke brightness.
Explicitly initialize when aux support is enabled.
Reported-and-tested-by: Luke Jones <luke@ljones.dev>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3792
Fixes: 38077562e0 ("drm/amd/display: Implement new backlight_level_params structure")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20241128032200.2085398-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
An HP Pavilion Aero Laptop 13-be0xxx/8916 has an ACPI EDID, but using
it is causing corruption. It's got illogical values of not specifying
a digital interface. Sanity check the ACPI EDID to avoid tripping such
problems.
Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3782
Fixes: c6a837088b ("drm/amd/display: Fetch the EDID from _DDC if available for eDP")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20241128032500.2088288-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not all platforms provide the full range of PWM backlight capabilities
supported by the hardware through ATIF.
Use the generic drm panel minimum backlight quirk infrastructure to
override the capabilities where necessary.
Testing the backlight quirk together with the "panel_power_savings"
sysfs file has not shown any negative impact.
One quirk seems to be that 0% at panel_power_savings=0 seems to be
slightly darker than at panel_power_savings=4.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Dustin L. Howett <dustin@howett.net>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241111-amdgpu-min-backlight-quirk-v7-2-f662851fda69@weissschuh.net
Clang on LoongArch (18+) appears to be unaffected by the bug causing
excessive stack usage in calculate_bandwidth(). But when building DC_FP
support the stack frame size can be as large as 2816 bytes, which causes
the FRAME_WARN build warnings. So on LoongArch we allow building DC with
clang, but disable DC_FP by default.
The help message is also updated.
Tested-by: Rui Wang <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit addresses a null pointer dereference issue in
hwss_setup_dpp(). The issue could occur when pipe_ctx->plane_state is
null. The fix adds a check to ensure `pipe_ctx->plane_state` is not null
before accessing. This prevents a null pointer dereference.
Fixes: 0baae62463 ("drm/amd/display: Refactor fast update to use new HWSS build sequence")
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit addresses a null pointer dereference issue in
dcn20_program_pipe(). Previously, commit 8e4ed3cf16 ("drm/amd/display:
Add null check for pipe_ctx->plane_state in dcn20_program_pipe")
partially fixed the null pointer dereference issue. However, in
dcn20_update_dchubp_dpp(), the variable pipe_ctx is passed in, and
plane_state is accessed again through pipe_ctx. Multiple if statements
directly call attributes of plane_state, leading to potential null
pointer dereference issues. This patch adds necessary null checks to
ensure stability.
Fixes: 8e4ed3cf16 ("drm/amd/display: Add null check for pipe_ctx->plane_state in dcn20_program_pipe")
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following:
- DC core fixes
- DCN35 fix
- DCN4+ fixes
- DML2 fix
- New SPL features
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are cases where an OTG is remapped from driving a regular HDMI
display to a DP/eDP display. There are also cases where DTBCLK needs to
be enabled for HPO, but DTBCLK DTO programming may be done while OTG is
still enabled which is dangerous as the PIPE_DTO_SRC_SEL programming may
change the pixel clock generator source for a mapped and running OTG and
cause it to hang.
Remove the PIPE_DTO_SRC_SEL programming from this sequence since it is
already done in program_pixel_clk(). Additionally, make sure that
program_pixel_clk sets DTBCLK DTO as source for special HDMI cases.
Cc: stable@vger.kernel.org # 6.11+
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
SPL code forces taps to 1 when ratio is 1:1 and sharpness is off
But for chroma 1:1, need taps > 1 to handle cositing
[How]
Do not force chroma taps to 1 when ratio is 1:1 for YUV420
Remove 420_CHROMA_BYPASS mode for scaler
Reviewed-by: Navid Assadian <navid.assadian@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Early return possible if context has no clk_mgr.
This will lead to an invalid power profile being returned
which looks identical to a profile with the lowest power level.
Add back logic that populated the power profile and overwrite
the value if needed.
Cc: stable@vger.kernel.org
Fixes: d016d0dd5a ("drm/amd/display: Update Interface to Check UCLK DPM")
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Add public API to obtain number of taps in SPL.
[How]
Isolate function to calculate recout, ratios and viewport before
calculating taps. Call function in both public taps API call and private
scaling call.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When C-State entry is requested, the rate limiter will be disabled
which can result in high contention in the DCHUB return path.
[HOW]
Enable the rate limiter during C-state requests to prevent contention.
Cc: stable@vger.kernel.org # 6.11+
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The mechanism to backup and restore plane states doesn't maintain
refcount, which can cause issues if the refcount of the plane changes
in between backup and restore operations, such as memory leaks if the
refcount was supposed to go down, or double frees / invalid memory
accesses if the refcount was supposed to go up.
[How]
Cache and re-apply current refcount when restoring plane states.
Cc: stable@vger.kernel.org
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are some pipe scaler validation failure when the pipe is phantom
and causes crash in DML validation. Since, scalar parameters are not
as important in phantom pipe and we require this plane to do successful
MCLK switches, the failure condition can be ignored.
[How]
Ignore scalar validation failure if the pipe validation is marked as
phantom pipe.
Cc: stable@vger.kernel.org # 6.11+
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
No check on head pipe during the dml to dc hw mapping will allow illegal
pipe usage. This will result in a wrong pipe topology to cause mpcc tree
totally mess up then cause a display hang.
[How]
Avoid to use the pipe is head in all check and avoid ODM slice during
preferred pipe check.
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since is_dsc_possible is already checked just above, there's no need to
check it again before filling out the DSC settings.
Signed-off-by: Bhavin Sharma <bhavin.sharma@siliconsignals.io>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
At some point, the IEEE ID identification for the replay check in the
AMD EDID was added. However, this check causes the following
out-of-bounds issues when using KASAN:
[ 27.804016] BUG: KASAN: slab-out-of-bounds in amdgpu_dm_update_freesync_caps+0xefa/0x17a0 [amdgpu]
[ 27.804788] Read of size 1 at addr ffff8881647fdb00 by task systemd-udevd/383
...
[ 27.821207] Memory state around the buggy address:
[ 27.821215] ffff8881647fda00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 27.821224] ffff8881647fda80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 27.821234] >ffff8881647fdb00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 27.821243] ^
[ 27.821250] ffff8881647fdb80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 27.821259] ffff8881647fdc00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 27.821268] ==================================================================
This is caused because the ID extraction happens outside of the range of
the edid lenght. This commit addresses this issue by considering the
amd_vsdb_block size.
Cc: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit removes a legacy debug_defaults_diags struct.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the nominal VBlank is too small, optimizing for stutter can cause
the prefetch bandwidth to increase drasticaly, resulting in higher
clock and power requirements. Only optimize if it is >3x the stutter
latency.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In the case where a dml allocation fails for any reason, the
current state's dml contexts would no longer be valid. Then
subsequent calls dc_state_copy_internal would shallow copy
invalid memory and if the new state was released, a double
free would occur.
[How]
Reset dml pointers in new_state to NULL and avoid invalid
pointer
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ryan Seto <ryanseto@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If driver allocated region6 size is not same as the size in firmware,
dmcub won't enable region6.
[How]
Use region6 size in dmcub_fw_meta instead of a constant value.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: JinZe Xu <jinze.xu@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Number of taps is incorrectly being set when integer scaling is enabled.
Taps required when src_rect != dst_rect previously not considered.
Perform the calculations when integer scaling is enabled.
Set taps to 1 if the scaling ratio is 1:1.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
IGT displays Dmesg warnings which are likely false
[How]
Disabling p-state checks leading to this warning for DCN31 and DCN314
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Emily Nie <Emily.Nie@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Garbage will show due to dig is on. So blank stream needed.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Fudongwang <Fudong.Wang@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unconditionally reading DP tunneling support results in extraneous
errors messages on certain devices. Fix this by guarding the DPCD read
for DP tunneling support for USB4 DPIA endpoints.
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Need a flag to force MST blocked discovery for certain branch devices.
[How]
Added a flag to force MST blocked discovery in struct dc_panel_patch.
Reviewed-by: PeiChen Huang <peichen.huang@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In certain use case such as KDE login screen, there will be no atomic
commit while do the frame update.
If the Panel Replay enabled, it will cause the screen not updated and
looks like system hang.
[How]
Delay few atomic commits before enabled the Panel Replay just like PSR.
Fixes: be64336307 ("drm/amd/display: Re-enable panel replay feature")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3686
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3682
Tested-By: Corey Hickey <bugfood-c@fatooh.org>
Tested-By: James Courtier-Dutton <james.dutton@gmail.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Panel Replay feature may also use the same variable with PSR.
Change the variable name and make it not specify for PSR.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
String literals must be assigned to const char pointers.
[How]
By adding const keyword to fix compilation errors.
Reviewed-by: Lohita Mudimela <lohita.mudimela@amd.com>
Signed-off-by: Revalla Hari Krishna <Harikrishna.Revalla@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
HPD error status does not cover Replay desync error status
while executing autotests and CTS tests.
[How]
Refactor the checking flow, reporting the HPD error based on
different eDP feature.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Leon Huang <Leon.Huang1@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
1. HDMI does not have 6 bpc support. Having 6 bpc pass validation
does not comply with spec.
2. Validate 420 only for native HDMI, but not apply to pcon use
case.
3. Current mode validation log is not readable.
[how]
1. Cap 8 bpc for dp-hdmi converter.
2. Validate yuv420 for pcon use case as well,
if rgb/yuv444 8bpc cannot fit into pcon bw limitation of
the link from the converter to HDMI sink.
3. Add readable pixel_format and color_depth into debug log.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Implement the new backlight_level_params structure as part of the VBAC
framework, the information in this structure is needed to be passed down
to the DMCUB to identify the backlight control type, to adjust the
backlight of the panel and to perform any required conversions from PWM
to nits or vice versa.
[How]
Modified existing functions to include the new backlight_level_params
structure.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Kaitlyn Tse <Kaitlyn.Tse@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Observe after suspend/resme, we can't light up mst monitors under specific
mst hub. The reason is that driver still writes DPCD DP_MSTM_CTRL after LT.
It's forbidden even we write the same value for that dpcd register.
[How]
We already resume the mst branch device dpcd settings during
resume_mst_branch_status(). Leverage drm_dp_mst_topology_queue_probe() to
only probe the topology, not calling drm_dp_mst_topology_mgr_resume() which
will set DP_MSTM_CTRL as well.
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Move the wait for pending updates past prepare_bandwidth if the previous
update was not a full update to reduce the average time it takes to
complete a full update.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
An upstream bug report suggests that there are production dGPUs that are
older than DCN401 but still have a umc_info in VBIOS tables with the
same version as expected for a DCN401 product. Hence, reading this
tables should be guarded with a version check.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3678
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
Adjust otg w/a disable condition to include HPO explicitly rather than
assuming it is implicitly used through DP2.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
Applying a hw w/a only relevant to DIG FIFO causing corruption
using HPO, do not apply the w/a if on DP2/HPO
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During boot up and resume the DC layer will reset the panel
brightness to fix a flicker issue.
It will cause the dm->actual_brightness is not the current panel
brightness level. (the dm->brightness is the correct panel level)
[How]
Set the backlight level after do the set mode.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Fixes: d9e865826c ("drm/amd/display: Simplify brightness initialization")
Reported-by: Mark Herbert <mark.herbert42@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3655
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During mode validation, there maybe modes that fail
max_downscale_src_width check and scaling_quality
taps are 0. This will cause an assert to trigger
in spl_set_filters_data() because taps are 0.
[How]
Move taps calculation for non-adaptive scaling mode
to separate function and call it
if max_downscale_src_width fails. This will
populate taps if scaling_quality taps are 0.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
SEC_CNTL isn't readable by x86 and can block Z8 entry if read.
[How]
Remove the read.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Code reading rxstatus message size was incorrectly assigning it to
uint8_t, despite the value being 10 bits long (lower byte plus lowest
2 bits from upper byte). This caused the highest 2 bits to be ignored,
potentially missing invalid values.
[How]
Change all local variables holding rxstatus message size from uint8_t
to uint16_t, as in mod_hdcp_message_hdcp2::rx_id_list_size.
Replaced untyped HDCP_2_2_HMID_RXSTATUS_MSG_SZ_HI macro with function
hdcp_2_2_hmid_rxstatus_msg_sz(const uint8_t[2]) to encapsulate entire
calculation and return a typed result.
Removed spaces mixed with tabs to fix indentation on modified lines.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 4f01a68751.
[why & how]
The offending commit caused a lighting issue for Samsung Odyssey G9
monitors when connecting via USB-C. The commit was intended to block certain UHBR rates.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
insert divided by zero protection
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Tearing can occur if there is a flip immediate plane and SW cursor.
check_subvp_sw_cursor_fallback_req falls back to SW cursor if the
stream has the potential to use subVP.
Check for fallback not needed if HW cursor is required.
e.g. Fullscreen gaming
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit c2c2ce1e96 ("drm/amd/display: Optimize passive update planes.")
removed the last caller of context_timing_trace.
Remove it.
With that gone, no one is now looking at the 'timing_trace' flag, remove
it and all the places that set it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
cm3_helper_translate_curve_to_degamma_hw_format() since it was added in
2020's commit
03f54d7d34 ("drm/amd/display: Add DCN3 DPP")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
calculate_user_regamma_coeff() and calculate_user_regamma_ramp() were
added in 2018 in commit
55a01d4023 ("drm/amd/display: Add user_regamma to color module")
but never used.
Remove them and their helpers.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts
commit 9dad21f910 ("drm/amd/display: update DML2 policy EnhancedPrefetchScheduleAccelerationFinal DCN35")
[why & how]
The offending commit exposes a hang with lid close/open behavior.
Both issues seem to be related to ODM 2:1 mode switching, so there
is another issue generic to that sequence that needs to be
investigated.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 68bf95317e)
Cc: stable@vger.kernel.org
This version brings along following fixes:
- Fix polling DSC registers during S0i3
- Fix idle optimizations entry log
- Change MPC Tree visual confirm colours
- Fix underflow when playing 8K video in full screen mode
- Optimize power up sequence for specific OLED
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add some scruct for secure display.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previously dscl_prog_data stored pointer to sharpness 1dlut table.
SPL had four pre-generated tables, one for each setup. This allowed
us to minimize number of times we had to recalculate table when
switching between setups.
However, with dual display, this becomes an issue because for a given
setup, we could have a different per app sharpness value than the
global sharpness value. So the pre-generated table will change
but both displays may point to the same table and one of them
will have the wrong sharpness setting.
[How]
Store the sharpness 1dlut table in dscl_prog_data. This ensures
that each display can have its own sharpness setting.
Reviewed-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
DSC may be power gated when coming out of S0i3, so avoid polling
DSC registers since it will fail anyways. Only read if it is known
that DSC is in use.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Whether we really enter idle optimizations are decided within DC.
Printing into dmesg before calling the DC API gives an incorrect
indication that we are entering idle optimization in cases where its
disabled manually.
To fix this, remove the print in DM and add them in DC
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
MPC background colours that use fractional components look different if
MPC OGAM is in use vs in bypass mode. The current red and orange colours
look very similar when OGAM is in bypass, so the colours need to change
to be consistently very easy to tell apart.
[How]
Use colours that only have 0 or MAX values in each component
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
The variable "ips_supported" is redundant and we can return from
dcn35_smu_get_ips_supported directly.
This fixes 1 UNUSED_VALUE issue reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
misc0, temp and split_pipe are assigned but immediately re-assigned
to other values. The early assignments are useless and are removed.
Unused variables are removed as well.
This fixes 5 UNUSED_VALUE issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If max_downscale_src_width check fails, we exit early from
spl_calculate_scaler_params but dscl_prog_data is not fully
populated. If viewport is left at 0, it can cause crash in dml.
[How]
Call spl_set_dscl_prog_data before we exit early from
spl_calculate_scaler_params to populate dscl_prog_data
Populate taps in spl_get_optimal_number_of_taps
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Flickering observed while playing 8k HEVC-10 bit video in full screen
mode with black border. We didn't support this case for subvp.
Make change to the existing check to disable subvp for this corner case.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For Header related changes for core
[How]
Refactoring if and endif statements to enable DC_LOGGER
Reviewed-by: Mounika Adhuri <mounika.adhuri@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Lohita Mudimela <lohita.mudimela@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix DP Compliance test 4.2.1.3, 4.2.2.8, 4.3.1.12, 4.3.1.13
when IPS enabled.
Original HPD detection interval is set to 5s which violates DP
compliance.
Reduce the interval parameter, such that link training can be
finished within 5 seconds.
Fixes: afca033f10 ("drm/amd/display: Add periodic detection for IPS")
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts
commit 9dad21f910 ("drm/amd/display: update DML2 policy EnhancedPrefetchScheduleAccelerationFinal DCN35")
[why & how]
The offending commit exposes a hang with lid close/open behavior.
Both issues seem to be related to ODM 2:1 mode switching, so there
is another issue generic to that sequence that needs to be
investigated.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Adds support for P-State stall timeout detection in DCHUBBUB.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Spread on DPREFCLK by 0.3 percent can have a negative effect on sink
when PHY SSC is also spread by 0.3 percent
[How]
Add boot option for DMU to lower PHY SSC
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
OLED power up sequence takes an extra 150ms via hardcoded delay,
but there is a strict requirement on DisplayOn resume time.
For customer panel, remove these delays to meet target until a
cleaner solution is can be put in place.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are two events to trace the beginning and the end of
amdgpu_dm_atomic_commit_tail, but only the one ate the beginning was
placed. Place amdgpu_dm_atomic_commit_tail_finish tracepoint at the end
than.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Disabling P-State support on full updates for DCN401 results in
introducing additional communication with SMU. A UCLK hard min message
to SMU takes 4 seconds to go through, which was due to DCN not allowing
pstate switch, which was caused by incorrect value for TTU watermark
before blanking the HUBP prior to DPG on for servicing the test request.
Fix the issue temporarily by disallowing pstate changes for compliance
test while test request handler is reworked for a proper fix.
Fixes: 67ea53a4bd ("drm/amd/display: Disable DCN401 UCLK P-State support on full updates")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8a79f7cdbb)
Cc: stable@vger.kernel.org
[Why&How]
vblank immediate disable currently does not work for all asics. On
DCN401, the vblank interrupts never stop coming, and hence we never
get a chance to trigger idle optimizations.
Add a workaround to enable immediate disable only on APUs for now. This
adds a 2-frame delay for triggering idle optimization, which is a
negligible overhead.
Fixes: 58a261bfc9 ("drm/amd/display: use a more lax vblank enable policy for older ASICs")
Fixes: e45b6716de ("drm/amd/display: use a more lax vblank enable policy for DCN35+")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9b47278cec)
Cc: stable@vger.kernel.org
We dont need to set the functions to NULL which arent
needed as global structure members are by default
set to zero or NULL for pointers.
Cc: Leo Liu <leo.liu@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix dcn401 idle optimization problem
- Fix cursor corruption on dcn35
- Fix DP LL compliance failures
- Fix SubVP Phantom VBlank End calculation
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & How]
The original guard is wrongly to be set as for dcn30.
Changed it from 30 to 301.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Bhuvanachandra Pinninti <bpinnint@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current fullscreen check in SPL using dm_helpers is out-of-sync
with dc state. This causes an issue during minimal transition
where we pick an invalid intermediate state because the pre and
post fullscreen status are different.
[How]
Add sharpening_required flag to dc_stream_state. Use this flag to
indicate if we are in fullscreen or not. Propagate flag to SPL for
fullscreen status. Remove workaround in DML
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The phantom stream timing is copied from the main stream as most
parameters are identical, however some need to be recalculated.
Currently VBlank End is not recalculated and copied from the main
incorrectly.
[HOW]
Recalculate VBlank End for phantom stream timing.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Disabling P-State support on full updates for DCN401 results in
introducing additional communication with SMU. A UCLK hard min message
to SMU takes 4 seconds to go through, which was due to DCN not allowing
pstate switch, which was caused by incorrect value for TTU watermark
before blanking the HUBP prior to DPG on for servicing the test request.
Fix the issue temporarily by disallowing pstate changes for compliance
test while test request handler is reworked for a proper fix.
Fixes: 67ea53a4bd ("drm/amd/display: Disable DCN401 UCLK P-State support on full updates")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Array indices out of bound caused memory corruption. Adding checks to
ensure that array index stays in bound.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reuse subvp enable check from DCN32 for IGT testing of Sub-Viewport
feature on DCN401
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Cursor corruption observed on USBC display with specific system setup with a
reboot. Cursor memory might still in the lightsleep state due to voltage
issue, we need program DISPCLK_R_GATE_DISABLE to avoid this issue only on
DCN35.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
vblank immediate disable currently does not work for all asics. On
DCN401, the vblank interrupts never stop coming, and hence we never
get a chance to trigger idle optimizations.
Add a workaround to enable immediate disable only on APUs for now. This
adds a 2-frame delay for triggering idle optimization, which is a
negligible overhead.
Fixes: 58a261bfc9 ("drm/amd/display: use a more lax vblank enable policy for older ASICs")
Fixes: e45b6716de ("drm/amd/display: use a more lax vblank enable policy for DCN35+")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a boundary check for the hpd_source index during the
link encoder creation process for all dcn401 ip. The check ensures that the
index is within the valid range of the link_enc_hpd_regs array to
prevent out-of-bounds access.
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a boundary check for the hpd_source index during the
link encoder creation process for all dcn10 ip. The check ensures that the
index is within the valid range of the link_enc_hpd_regs array to
prevent out-of-bounds access.
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a boundary check for the hpd_source index during the
link encoder creation process for all DCExxx IP's. The check ensures
that the index is within the valid range of the link_enc_hpd_regs array
to prevent out-of-bounds access.
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a boundary check for the hpd_source index during the
link encoder creation process for dcn20/dcn201 IP's. The check ensures
that the index is within the valid range of the link_enc_hpd_regs array
to prevent out-of-bounds access.
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake in a dm_error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Disable dynamic ODM when sharpness is enabled
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
The function core_link_read_dpcd returns status which is not used at
all, making them useless assignments.
[HOW]
Print error messages if core_link_read_dpcd does not return DC_OK.
This fixes 2 UNUSED_VALUE issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want to clean up unnecessary asserts, one of which is an assert in
resource_is_pipe_type that fires if a pipe has no stream and still has
pointers to other pipes ("dangling state"). This gets hit because pipes
are not properly cleaned up in reset_back_end_for_pipe. When resetting a
pipe, the existing MPCC / ODM combine pointers are no longer valid,
especially when we put ODM in bypass.
[How]
- reset pipe pointers in reset_back_end_for_pipe
- remove useless code to avoid confusion
(a long time ago it had a reason to be there, not anymore)
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Pass in sharpening policy through plane state from control side
[How]
Add sharpener support through dc_caps.
Add sharpen policy to plane state and move to spl_input.
Pass sharpen policy from plane state to SPL.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Code for dcn401 to calculate available MALL size for display was shared
with dcn32 and did not provide the correct result for all ASICs.
[HOW]
Add dcn401 specific function to properly calculate the available MALL
for display.
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
To get sink emission rate information for future
supported refresh rate calculation.
Reviewed-by: ChunTao Tso <chuntao.tso@amd.com>
Signed-off-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
Print error messages when programming shaper lut or 3dlut fails.
This fixes 5 UNUSED_VALUE issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
A race condition occurs between cursor movement and vertical interrupt control
thread from OS, with both threads trying to exit IPS2.
Vertical interrupt control thread clears the prev driver allow signal while not fully
finishing the IPS2 exit process.
[How]
We want to detect all the allow signals have been cleared before we perform the full exit.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why && How]
Previous change for Coverity has caused regression on visual confirm
so fix it by reverting the part that affects visual confirm.
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is a known HW bug that causes the internal 3DLUT fetch signal to
be lost at VREADY, regardless of whether the OTG lock is being held or
not. A workaround is necessary to make sure that this internal signal
stays up after OTG unlock.
[How]
Set the 3DLUT_ENABLE bit immediately before and after the unlock. Also
use VUPDATE_KEEPOUT to prevent lock transition in the region between
VSTARTUP and VREADY, which could cause issues with this WA sequence.
Also including misc. 3DLUT DMA-related sequence fixes to address a few
regressions causing corruption.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently idle worker thread that checks for HPD while system is in IPS2
only supports headless and static screen use-cases.
In other display-off scenarios hotplug may not work.
[How]
For display-off only allow idle optimization when no display is connected.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Idle worker thread waits HPD_DETECTION_TIME for HPD processing complete.
Some displays require longer time for that.
[How]
Increase HPD_DETECTION_TIME to 100ms.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
"split_pipe" are assigned to test_pipe and then immediately are updated
to other values. The same also applies to "status" as well.
Similarly, "id", "dwb" and "unused_dpps" are assigned but the functions
immediately return, and thus they have no effects.
As a results, the assignments removed.
This fixes 5 UNUSED_VALUE issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
dpcd_get_tunneling_device_data calls core_link_read_dpcd which can
fail. The status from core_link_read_dpcd should be checked and error
messages is printed in case of failures.
This fixes 1 UNUSED_VALUE issue reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
drm_dp_dpcd_write() returns negative error on failure and thus returned
values need to be checked.
This fixes 3 UNUSED_VALUE issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a boundary check for the hpd_source index during the
link encoder creation process for dcn3x IP's. The check ensures that the
index is within the valid range of the link_enc_hpd_regs array to
prevent out-of-bounds access.
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
"build failure after merge of the amdgpu tree"
dm_suspend/dm_resume functions argument mismatch
not caught in validation as it was under config
CONFIG_DEBUG_KERNEL_DC which wasnt enabled by
default.
Change argument from adev to ip_block.
Fixes: 982d7f9bfe ("drm/amdgpu: update the handle ptr in suspend")
Fixes: 7feb4f3ad8 ("drm/amdgpu: update the handle ptr in resume")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These parts were mainly for compute workloads, but they have
a display that was available for the console. These chips
should support SG display, but I don't know that the support
was ever validated on Linux so disable it by default. It can
still be enabled by setting sg_display=1 for those that
want to play with it. These systems also generally had large
carve outs so SG display was less of a factor.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3356
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since, two suspend-resume cycles are required to enter hibernate and,
since we only need to enable idle optimizations in the first cycle
(which is pretty much equivalent to s2idle). We can check in_s0ix, to
prevent the system from entering idle optimizations before it actually
enters hibernate (from display's perspective). Also, call
dc_set_power_state() before dc_allow_idle_optimizations(), since it's
safer to do so because dc_set_power_state() writes to DMUB.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2fe79508d9)
Cc: stable@vger.kernel.org # 6.10+
[Why]
Since the surface/stream update flags aren't cleared after applying
updates, those same updates may be applied again in a future call to
update surfaces/streams for surfaces/streams that aren't actually part
of that update (i.e. applying an update for one surface/stream can
trigger unintended programming on a different surface/stream).
For example, when an update results in a call to
program_front_end_for_ctx, that function may call program_pipe on all
pipes. If there are surface update flags that were never cleared on the
surface some pipe is attached to, then the same update will be
programmed again.
[How]
Clear the surface and stream update flags after applying the updates.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3441
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3616
Cc: Melissa Wen <mwen@igalia.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7671f62c10)
Cc: stable@vger.kernel.org
Since, two suspend-resume cycles are required to enter hibernate and,
since we only need to enable idle optimizations in the first cycle
(which is pretty much equivalent to s2idle). We can check in_s0ix, to
prevent the system from entering idle optimizations before it actually
enters hibernate (from display's perspective). Also, call
dc_set_power_state() before dc_allow_idle_optimizations(), since it's
safer to do so because dc_set_power_state() writes to DMUB.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some manufacturers have intentionally put an EDID that differs from
the EDID on the internal panel on laptops.
Attempt to fetch this EDID if it exists and prefer it over the EDID
that is provided by the panel. If a user prefers to use the EDID from
the panel, offer a DC debugging parameter that would disable this.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When updating connector under drm_edid infrastructure, many calculations
and validations are already done and become redundant inside AMD driver.
Remove those driver-specific code in favor of the DRM common code.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update connector caps with drm_edid data before parsing info for
freesync.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Connectors have source physical address available in display
info. Use drm_dp_cec_attach() to use it instead of parsing the EDID
again.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace raw edid handling (struct edid) with the opaque EDID type
(struct drm_edid) on amdgpu_dm_connector for consistency. It may also
prevent mismatch of approaches in different parts of the driver code.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This DC patchset brings improvements in multiple areas. In summary, we
highlight:
- Improvements to seemless boot.
- Adjustments for DSC dock.
- DML improvements
- DMCUB fixes for D0/D3 and new register offset.
- Code cleanup.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Initialize the new backlight_level_params structure as part of the ABC
framework, the information in this structure is needed to be passed down
to the DMCUB to identify the backlight control type, to adjust the
backlight of the panel and to perform any required conversions from PWM
to nits or vice versa.
[How]
Created initial framework of the backlight_level_params struct and
modified existing functions to include the new structure.
Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com>
Reviewed-by: Iswara Nagulendran <iswara.nagulendran@amd.com>
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Kaitlyn Tse <Kaitlyn.Tse@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Uninitialized variables could cause some bits to be set, thus enabling
features unintentionally.
[How]
Initialize replay_config variable to avoid future issues.
Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com>
Reviewed-by: Iswara Nagulendran <iswara.nagulendran@amd.com>
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Kaitlyn Tse <Kaitlyn.Tse@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
log2_blk_height and log2_blk_width are assigned to 0 and then
immediately are updated to other values. The assignments to zero are
redudant and removed.
This fixes 18 UNUSED_VALUE issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
TimeForFetchingMetaPTE, TimeForFetchingRowInVBlank and
LinesToRequestPrefetchPixelData are local variables. They
are freed when CalculatePrefetchSchedule() ends and need
not clearing explicitly.
This fixes 21 UNUSED_VALUE issues reported by Coverity.
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Videos using YUV420 format may result in high power being used.
Disabling MPO may result in lower power usage.
Update interface that can be used to check power profile of a dc_state.
[How]
Add helper functions that can be used to determine power level:
- get power profile after a dc_state has undergone full validation
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Assigning link encoder is not relevant to validating bandwidth so move
the logic outside of dc_global_validate.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Playing 1080p video on 4k60 timing uses UCLK DPM5 and mode support
determines that p-state switching is not supported.
[How]
Allow DML to increase latency as the last strategy so strategies such
as VBlank p-state switching may become possible
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Streams with invalid new connector state should be elimiated from
dsc policy.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Idle worker thread serves for periodic detection of HPD while system is in IPS2.
Currently it is used in headless and static screen scenarios.
IPX can be configured not to execute IPS2 for static screen.
In this case idle worker is redundant.
[How]
Only use periodic detection for static screen if IPS is fully enabled.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Viewport size excess surface size observed sometime with some timings or
resizing the MPO video window to cause MPO unsupported. Calculate final
viewport size first with a 100x100 dummy viewport to get the max TAP
support and then re-run final viewport calculation if TAP value changed.
Removed obsolete preliminary viewport calculation for TAP validation.
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Since the surface/stream update flags aren't cleared after applying
updates, those same updates may be applied again in a future call to
update surfaces/streams for surfaces/streams that aren't actually part
of that update (i.e. applying an update for one surface/stream can
trigger unintended programming on a different surface/stream).
For example, when an update results in a call to
program_front_end_for_ctx, that function may call program_pipe on all
pipes. If there are surface update flags that were never cleared on the
surface some pipe is attached to, then the same update will be
programmed again.
[How]
Clear the surface and stream update flags after applying the updates.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3441
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3616
Cc: Melissa Wen <mwen@igalia.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is based on real asic performance result.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Programming outstanding updates is causing hangs on dcn35, so remove
for now.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Regamma resolution for the first few black levels can have problems for
calibration.
[HOW]
HW LUT is divided into N power-of-2 regions each with K segments. For
SDR mode we set min point at 2^-10 and increments of 2^-13. It's
generally more than 8-bit SDR needs, but some calibration tools and API
use 12-bit curves.
The fix shifts starting point to 2^-12 and starting increments at 2^-16.
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Signed-off-by: Peterson <peterson.guo@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Missing a dc_dmub_srv_notify_fw_dc_power_state in driver init.
[How]
Notify DMCUB of D0 state in hardware_init.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When Source extend the vblank to reach the minimum panel
refresh rate, the vtotal length could have 1 line longer
than the maximum supported vtotal.
The reason is we optimized the vtotal/refresh-rate calculation
to get more accurate vtotal number by rounding the calculation
result. But when the target refresh rate is the minimum
refresh rate, the vtotal result could be round up and over
the maximum supported vtotal.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: po-tchen <robin.chen@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For some EDP to MIPI panel, disabling OTG when link is alive like boot
case, the converter might output garbage or show no display because our
GPU is not sending required pixel data.
Alos Dig fifo underflow was found which might cause garbage, when
resetting otg for other types of EDP panels.
[How]
Skipping resetting OTG if the dig fifo is on. Make sure that the otg for
the pipe is the one that the dig fifo is selecting via the FE mask.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Zhongwei <Zhongwei.Zhang@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
TBT4 dock have bandwidth limitation, need dsc always on to support all
modes.
[how]
force dsc always on when detect TBT4 dock.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Fudongwang <Fudong.Wang@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit b8d046985c.
Reverting as regression discovered on certain systems and golden values
need to updated.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The MPO plane will receive a flip but
desktop plane may not receive a flip when GSL is enabled.
As a result, system will be stuck waiting for a flip that was never sent.
[How]
Set update address update flag of all flip_immediate planes
if there are multiple planes.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Resync FIFO is a workaround to write the same value to
DENTIST_DISPCLK_CNTL register after programming OTG_PIXEL_RATE_DIV
register, in case seemless boot, there is no OTG_PIXEL_RATE_DIV register
update, so skip CRTC disable when resync FIFO to avoid random FIFO error
and garbage.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Fudongwang <Fudong.Wang@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dcn32_blank_phantom() does not consider the subVP+ODM case when blanking.
Only one of the pipes will get blanked. Remaining pipes are not blanked.
Will cause underflow in the phantom pipe when enabling the CRTC.
[How]
Use blank_pixel_data() instead of blank_phantom().
remove dcn32_blank_phantom() since logic is identical.
Different DPG dimensions get programmed when blanking phantom pipes.
Previously had phantom pipes use DPG dimensions of the main stream.
Now use DPG dimensions of the phantom streams
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
htmldoc generation depend upon the input arguments etc
to generate the document. After update of handle to
ip_block then update needs in comments too to fix the
warnings.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410021904.YyGjlpk9-lkp@intel.com
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of hw_fini.
Also update the ip_block ptr where ever needed as
there were cyclic dependency of hw_fini on suspend
and some followed clean up.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of hw_init.
Also update the ip_block ptr where ever needed as
there were cyclic dependency of hw_init on resume.
v2: squash in isp fix
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of resume.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of suspend.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of wait_for_idle.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Connected with a Thunderbolt monitor and do the suspend and the system
may hang while resume.
The TBT monitor HPD will be triggered during the resume procedure
and call the drm_client_modeset_probe() while
struct drm_connector connector->dev->master is NULL.
It will mess up the pipe topology after resume.
[How]
Skip the TBT monitor HPD during the resume procedure because we
currently will probe the connectors after resume by default.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 453f86a269)
Cc: stable@vger.kernel.org
[Why]
There are more IPS modes other than DMUB_IPS_ENABLE that enables IPS. We
need to enable the hotplug detect idle workqueue for those modes as
well.
[How]
Modify the if condition to initialize the workqueue in all IPS modes
except for DMUB_IPS_DISABLE_ALL.
Fixes: 65444581a4 ("drm/amd/display: Determine IPS mode by ASIC and PMFW versions")
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 181db30bcf)
Cc: stable@vger.kernel.org
[WHY & HOW]
Some eDP panels suffer from flicking when HDR is enabled in KDE. This
quirk works around it by skipping VSC that is incompatible with eDP
panels.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3151
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4d4257280d)
Cc: stable@vger.kernel.org
[why]
set dispclk to 0 cause stability issue.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1c6b16ebf5)
Cc: stable@vger.kernel.org
Existing last step of dsc policy is to restore pbn value under minimum compression
when try to greedily disable dsc for a stream failed to fit in MST bw.
Optimized dsc params result from optimization step is not necessarily the minimum compression,
therefore it is not correct to restore the pbn under minimum compression rate.
Restore the pbn under minimum compression instead of the value from optimized pbn could result
in the dsc params not correct at the modeset where atomic_check failed due to not
enough bw. One or more monitors connected could not light up in such case.
Restore the optimized pbn value, instead of using the pbn value under minimum
compression.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 352c3165d2)
Cc: stable@vger.kernel.org
[WHY & HOW]
Mismatch in DCN35 DML2 cause bw validation failed to acquire unexpected DPP pipe to cause
grey screen and system hang. Remove EnhancedPrefetchScheduleAccelerationFinal value override
to match HW spec.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9dad21f910)
Cc: stable@vger.kernel.org
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of soft_reset.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of check_soft_reset.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reorganize kerneldoc parameter names to match the parameter
order in the function header.
Problems identified using Coccinelle.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of early_fini.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update the *handle to amdgpu_ip_block ptr for all
functions pointers of sw_fini.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update the *handle to amdgpu_ip_block ptr for all
functions pointers of sw_init.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the ptr handle to amdgpu_ip_block ptr in all
the functions of late_init function ptr.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update the handle ptr to amdgpu_ip_block ptr
for all functions pointers on early_init.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC 3.2.303 contains some improvements as summarized below:
* Improve brightness control
* Add support for UHBR10 eDP
* OPTC required only for DTBCLK_P for dcn401
* Fix TBT monitor resume issue
* Code cleanup
Reviewed-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DTBCLK_P is used to generate virtual pixel clock, and to drive the HPO
stream encoder clock. Programming the required clock when
enabling/disabling both components can cause issues.
For example, if HPO is being disabled and clock source is changed to
REFCLK, virtual pixel rate will then be wrong, causing issues in CRTC.
[HOW]
Only program the DTBCLK_P when programming CRTC, as its expected it will
be enabled prior to HPO, and disabled after HPO in all valid cases.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This enables starting and stopping IPS residency measurements
and querying the IPS residency information consisting of residency
percent, entry counter, total time active & inactive, and histograms
for the specified IPS mode.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
A number of values are assigned to variables but the stored values are
not used afterwards.
[HOW]
The assignments are removed. If the variables are not used, they are
removed as well.
This fixes 9 UNUSED_VALUE issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
MacroTileSizeBytes is set to either 256 or 65535 and it is never
4096. Its branch is not taken, and should be removed. Similarly,
mode_422 is always 0 and thus ppe will always be 1. The ternary
operator should be removed.
This fixes 2 DEADCODE issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adjust the existing brightness control functions to use the new
ABC Framework and prioritize Aux-based brightness control.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Muyuan Yang <muyuan.yang@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prioritize Aux-based over PWM-based brightness control
for more types of panels and introduce a new structure
to store and manage the type of brightness control used.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Muyuan Yang <muyuan.yang@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why and how]
The current UHBR10 eDP panel has new security feature update. Add support for the new FW
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Liu Xi (Alex) <xi.liu@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are some issues which customer only can provide full
dump for analyze, without register history, it's hard to
debug HW status.
[How]
1. Put register read/write into WPP log so we can trace the logs
from full memory dump.
2. MALL doesn't add into WPP, add it.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Connected with a Thunderbolt monitor and do the suspend and the system
may hang while resume.
The TBT monitor HPD will be triggered during the resume procedure
and call the drm_client_modeset_probe() while
struct drm_connector connector->dev->master is NULL.
It will mess up the pipe topology after resume.
[How]
Skip the TBT monitor HPD during the resume procedure because we
currently will probe the connectors after resume by default.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If two monitors with TMDS signals were timing synced and one was
disconnected, the stream would go out of sync too early due to
the PLL turning off and the system could hang
[How]
On link disable output, change PHY FSM transition from TX_EN-to-PHY_OFF
to TX_EN-to-PLL_ON for TMDS
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Ryan Seto <ryanseto@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are more IPS modes other than DMUB_IPS_ENABLE that enables IPS. We
need to enable the hotplug detect idle workqueue for those modes as
well.
[How]
Modify the if condition to initialize the workqueue in all IPS modes
except for DMUB_IPS_DISABLE_ALL.
Fixes: 65444581a4 ("drm/amd/display: Determine IPS mode by ASIC and PMFW versions")
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current state should be used when waiting for DET update
instead of new context.
For any streams decreasing in DET, pipes used in the current state
should be checked since those pipes need to free their DET before
DET can be reallocated.
[How]
Pass in current_state instead of context.
Use pipe from current_state instead of context. This assumes that
pipe in the current_state is an OTG_MASTER pipe if the pipe in the context is an OTG_MASTER pipe.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Some eDP panels suffer from flicking when HDR is enabled in KDE. This
quirk works around it by skipping VSC that is incompatible with eDP
panels.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3151
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In cases where an MPO plane is being dragged around partially off-screen,
it is possible to get a flip where the only scaling parameters to change
are the clip rect size and position. Currently, clip rect size changes
are considered medium updates, which can result in the clip rect being used
for HW programming being larger than the clip rect that was used for the
last DML validation. This can lead to mismatches in different parts of the
pipe and can result in a p-state hang.
[How]
- consider clip rect size changes scaling changes, therefore full updates
- refactor get_scaling_info_update_type for clarity
- remove clip_size_change update flag
Clip rect size changes were previously demoted from full updates as an
optimization when the MPO + ODM policy changed to always pre-allocate MPO
pipes, but it created the issue described above. Personally testing this
use case, the performance feels fine with full update spam, and we expect
this is a fairly infrequent use case. If the performance needs to be
optimized in the future, consider reworking the entire update type logic
to run a DML pass and determine the update type based on what DML says
will actually change.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Certain transitions from HW to SW cursor can be missed, which will
result in black visual confirm instead of expected blue/red. Need to add
handling for cursor visual confirm to dc_update_visual_confirm_color.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Videos using YUV420 format may result in high power being used.
Disabling MPO may result in lower power usage.
Update interface that can be used to check power profile of a dc_state.
[How]
Allow pstate switching in VBlank as last entry in strategy candidates.
Add helper functions that can be used to determine power level:
-get power profile after a dc_state has undergone full validation
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The "dpp35_dppclk_control" routine is incorrectly disabling the register clock gater
when the DPP is enabled.
The "DISPCLK_R_GATE_DISABLE" should never be set to 1 in the normal operating mode.
This will disable the clock gater and the DPPCLK register clock branch will always be running.
As a consequence, the dynamic power will be higher than expected.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
set dispclk to 0 cause stability issue.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Currently the absence of UHBR cable ID caps from USB-C PD does not block UHBR
rates. In situations where DPCD reports valid UHBR capability but USB-C PD
does not, such as using a USB-C to DP1.4 dongle connected to a native DP2.1
cable, link loss and lightup failures can be seen as a result.
Additionally, in edge cases where a platform supports cable ID but DMUB
doesn't correctly return cable ID caps, driver currently also allows UHBR.
[HOW]
Block UHBR rates over DP alt mode if cable id indicates no UHBR support.
Additionally, block UHBR rates if a cable ID supported platform receives no
reply from a DMUB cable id query.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current pipe unlock order set within dcn401_interdependent_update_lock.
Separate the logic from the functionality to allow for unit testing
and make it easier to debug.
[How]
Add a flag to indicate if a pipe unlock order should be set.
Create function to determine unlock order.
Indicate which pipes should be unlocked first using
array stored in dc scratch memory.
Pipes indicated in array can be unlocked in any order.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
cm2_params is used to set update_flags.
It's value is not intended to be modified.
[WHAT]
Change the declaration of cm2_params to be a constant variable
Reviewed-by: Tao Huang <tao.huang@amd.com>
Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com>
Signed-off-by: Shunlu Zhang <Shunlu.Zhang@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Triple buffer enablement currently does not work properly
[HOW]
Allow triple buffer enablement to happen properly on
fast updates
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Sung Lee <sunglee@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A stream without dsc_aux should not be eliminated from
the dsc determination. Whether it needs a dsc recompute depends on
whether its mode has changed or not. Eliminating such a no-dsc stream
from the dsc determination policy will end up with inconsistencies
in the new dc_state when compared to the current dc_state,
triggering a dsc recompute that should not have happened.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Turning off OTG before DIG is on and backlight is on, might cause:
DIG FIFO underflow.
EDP output unexpected video data. That might violate EDP spec.
EDP spec requires black light should be off before validate
video data is turned off.
Currently garbage issue only occurs in one type of EDP to MIPI converter.
[How]
Add monitor patch to call blank_stream() before disable_crtc().
That will be no impact for current sequence.
If there are more types of EDP panels meeting this issue later,
we might remove this monitor patch and fix the current sequence.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Zhongwei <Zhongwei.Zhang@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Before every full update we must wait for all pending updates to be
cleared - this is particularly important for minimal transitions
because if we don't wait for pending cleared, it will be as if
there was no minimal transition at all. In OTG we must read 3 different
status registers for pending cleared, one specifically for OTG updates,
one specifically for OPTC updates, and the last for surface related
updates.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Existing last step of dsc policy is to restore pbn value under minimum compression
when try to greedily disable dsc for a stream failed to fit in MST bw.
Optimized dsc params result from optimization step is not necessarily the minimum compression,
therefore it is not correct to restore the pbn under minimum compression rate.
Restore the pbn under minimum compression instead of the value from optimized pbn could result
in the dsc params not correct at the modeset where atomic_check failed due to not
enough bw. One or more monitors connected could not light up in such case.
Restore the optimized pbn value, instead of using the pbn value under minimum
compression.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
When integer scaling is enabled, set taps to 1 and disable adaptive
scaler and sharpener.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Mismatch in DCN35 DML2 cause bw validation failed to acquire unexpected DPP pipe to cause
grey screen and system hang. Remove EnhancedPrefetchScheduleAccelerationFinal value override
to match HW spec.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 8d20a066fa.
It's causing a failure in the abm_gradual igt test.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We don't actually need to request that the compositor does a full
modeset to modify the panel power savings level, we can instead
just make a request to DMUB, to set the new level dynamically.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Sebastian Wick <sebastian@sebastianwick.net>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3578
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix several copypaste mistakes in *_disable_link_output() functions where
an improper function pointer is checked before dereference.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@maxima.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch addresses warnings produced by the checkpatch script
related to unnecessary casts that could potentially hide bugs.
The specific warnings are as follows:
- Warning at drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_wrapper.c:16
- Warning at drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_wrapper.c:20
- Warning at drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_wrapper.c:30
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rohit Chavan <roheetchavan@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
bios_get_vga_enabled_displays has been unused since
commit 5a8132b9f6 ("drm/amd/display: remove dead dc vbios code")
Remove it.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The issue with panel power savings compatibility below
`AMDGPU_DM_DEFAULT_MIN_BACKLIGHT` happens at
`AMDGPU_DM_DEFAULT_MIN_BACKLIGHT` as well.
That issue will be fixed separately, so don't prevent the backlight
brightness from going that low.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/amd-gfx/be04226a-a9e3-4a45-a83b-6d263c6557d8@t-8ch.de/T/#m400dee4e2fc61fe9470334d20a7c8c89c9aef44f
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct the parameter descriptor for the function
`dc_process_dmub_dpia_set_tps_notification` to match the actual
parameters used.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:5768: warning: Function parameter or struct member 'tps' not described in 'dc_process_dmub_dpia_set_tps_notification'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:5768: warning: Excess function parameter 'ts' description in 'dc_process_dmub_dpia_set_tps_notification'
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As set_drr() is called from IRQ context, it can happen that the
pipe context has been nulled by dc_state_destruct().
Apply the same protection here that is already present for
dcn35_set_drr() and dcn10_set_drr(). I.e. fetch the tg pointer
first (to avoid a race with dc_state_destruct()), and then
check the local copy before using it.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142
Fixes: 06ad7e1642 ("drm/amd/display: Destroy DC context while keeping DML and DML2")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of having that in the amdgpu_bo_pin() function applied for all
pinned BOs.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Clear cached watermark after resume
- Update IPS default mode for DCN35/DCN351
- Use full update for swizzle mode change
- Skip to enable dsc if it has been off
- Fix underflow when setting underscan on DCN401
- Remove always-false branches
- Check null pointer before dereferencing se
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Driver could skip program watermarks when resume from S0i3/S4.
[HOW]
Clear the cached one first to make sure new value gets applied.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
RCG state of IPX in idle is more stable for DCN351 and some variants of
DCN35 than IPS2.
[HOW]
Rework dm_get_default_ips_mode() to specify default per ASIC and update
DCN35/DCN351 defaults accordingly.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently amdgpu takes backlight caps provided by the ACPI tables
on systems as is. If the firmware sets maximums that are too low
this means that users don't get a good experience.
To avoid having to maintain a quirk list of such systems, do a sanity
check on the values. Check that the spread is at least half of the
values that amdgpu would use if no ACPI table was found and if not
use the amdgpu defaults.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3020
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[WHY & HOW]
1) We did linear/non linear transition properly long ago
2) We used that path to handle SystemDisplayEnable
3) We fixed a SystemDisplayEnable inability to fallback to passive by
impacting the transition flow generically
4) AFMF later relied on the generic transition behavior
Separating the two flows to make (3) non-generic is the best immediate
coarse of action.
DC can discern SSAMPO3 very easily from SDE.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
It makes DSC enable when we commit the stream which need
keep power off, and then it will skip to disable DSC if
pipe reset at this situation as power has been off. It may
cause the DSC unexpected enable on the pipe with the
next new stream which doesn't support DSC.
[HOW]
Check the DSC used on current pipe status when update stream.
Skip to enable if it has been off. The operation enable
DSC should happen when set power on.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
When underscan is set through xrandr, it causes the stream destination
rect to change in a way it becomes complicated to handle the calculations
for subvp. Since this is a corner case, disable subvp when underscan is
set.
Fix the existing check that is supposed to catch this corner case by
adding a check based on the parameters in the stream
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
req128_c is always set to false and its branch is never taken.
Similarly, MacroTileSizeBytes is set to either 256 or 65535 and it is
never 4096 and it's branch is not taken.
Therefore, their branches are removed.
This fixes 3 DEADCODE issues reported by Coverity.
Acked-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
se is null checked previously in the same function, indicating
it might be null; therefore, it must be checked when used again.
This fixes 1 FORWARD_NULL issue reported by Coverity.
Acked-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY && HOW]
For some HDMI OVT timing, YCbCr422 encoding fails at the DSC
bandwidth check. The root cause is our DSC policy for timing
doesn't account for HDMI YCbCr422 native support.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
Disable sharpening if not in fullscreen if this policy is selected
Reviewed-by: Samson Tam <samson.tam@amd.com>
Signed-off-by: Relja Vojvodic <Relja.Vojvodic@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We intend to consolidate dp tunneling and conventional dp link training.
[HOW]
1. Use the same link training entry for both dp and dpia
2. Move SET_CONFIG of non-transparent mode to dmub side
3. Add set_tps_notification dmub_cmd to notify tps request for
non-transparent dpia link training
4. Check dpcd request result and abort link training early if dpia
aux tunneling fails
5. Add option to avoid affect old product
6. Separately handle wait_time_microsec for dpia
Reviewed-by: Cruise Hung <cruise.hung@amd.com>
Reviewed-by: George Shen <george.shen@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
On display on sequence, enabling SYMCLK32_LE root clock gating
causes issue in link training so disabling it is needed.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Sung Joon Kim <Sungjoon.Kim@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DSC on eDP could be enabled during VBIOS post. The enabled
DSC may not be disabled when enter to OS, once the system was
in second screen only mode before entering to S4. In this
case, OS will not send setTimings to reset eDP path again.
The enabled DSC HW will make a new stream without DSC cannot
output normally if it reused this pipe with enabled DSC.
[HOW]
In accelerated mode, to clean up DSC blocks if eDP is on link
but not active when we are not in fast boot and seamless boot.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Hangs with Z8 can occur if running an older unfixed PMFW version.
[HOW]
Fallback to RCG only for dynamic IPS2 states if it's not newer than
93.12. Limit to DCN35.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Add options to change sharpen policy based on surface format
and scaling ratios.
[HOW]
Add sharpen_policy to change policy based on surface format
and scale_to_sharpness_policy based on scaling ratios.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
If the output format is different for HDMI TMDS signals, they are not
synchronizable.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Corrupted screen will be observed when 4k144 DP/HDMI display and
4k144 eDP are connected, changing eDP refresh rate from 60Hz to 144Hz.
[HOW]
override_det_buffer_size_kbytes should be true for DCN35/DCN351.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Roman Li <roman.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
HPD sense notification has been implemented in DMUB, which
can occur during low power states and need to be
notified from firmware to driver.
[HOW]
Define callback and register new HPD sense notification.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Driver reports 0 display when the virtual display is still present, and
causes P-state hang in FW.
[HOW]
When enumerating through streams, check for active planes and use that
to indicate number of displays.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Daniel Sa <Daniel.Sa@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
There are some monitor timings that seem to be supported without
DSC but actually require DSC to be displayed. A VESA SCR introduced
a new max uncompressed pixel rate cap register that we can use to
handle these edge cases.
[HOW]
SST: Read caps from link and invalidate timings that exceed the
max limit but do not support DSC. Then check for options override
when determining BPP.
MST: Read caps from virtual DPCD peer device or daisy chained SST
monitor and set validation set BPPs to max if pixel rate exceeds
uncompressed limit. Validation set optimization continues as normal.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Ryan Seto <ryanseto@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Certain profiles have higher HDR multiplier than SDR white level max
which is not currently supported.
[HOW]
Use SDR white level when calculating matrix coefficients for HDR RGB MPO
path instead of HDR multiplier.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The calculated vtotal may has 1 line deviation. To get precisely
vtotal number, round the vtotal result.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correctly spelled comments make it easier for the reader to understand
the code.
Replace 'maxium' with 'maximum' in the comment &
replace 'diffculty' with 'difficulty' in the comment &
replace 'suppluy' with 'supply' in the comment &
replace 'Congiuration' with 'Configuration' in the comment &
replace 'eanbled' with 'enabled' in the comment.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DC has a special commit path for native cursor, which use the built-in
cursor pipe within DCN planes. This update path does not require all
enabled planes to be added to the list of surface updates sent to DC.
This is not the case for overlay cursor; it uses the same path as MPO
commits. This update path requires all enabled planes to be added to the
list of surface updates sent to DC. Otherwise, DC will disable planes
not inside the list.
[How]
If overlay cursor is needed, add all planes on the same CRTC as this
cursor to the atomic state. This is already done for non-cursor planes
(MPO), just before the added lines.
Fixes: 1b04dcca4f ("drm/amd/display: Introduce overlay cursor mode")
Closes: https://lore.kernel.org/lkml/f68020a3-c413-482d-beb2-5432d98a1d3e@amd.com
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
drm_normalize_zpos will set the crtc_state->zpos_changed to 1 if any of
it's assigned planes changes zpos, or is removed/added from it.
To have amdgpu_dm request a plane reset on this is too broad. For
example, if only the cursor plane was moved from one crtc to another,
the crtc's zpos_changed will be set to true. But that does not mean that
the underlying primary plane requires a reset.
[How]
Narrow it down so that only the plane that has a change in zpos will
require a reset.
As a future TODO, we can further optimize this by only requiring a reset
on z-order change. Z-order is different from z-pos, since a zpos change
doesn't necessarily mean the z-ordering changed, and DC should only
require a reset if the z-ordering changed.
For example, the following zpos update does not change z-ordering:
Plane A: zpos 2 -> 3
Plane B: zpos 1 -> 2
=> Plane A is still on top of plane B: no reset needed
Whereas this one does change z-ordering:
Plane A: zpos 2 -> 1
Plane B: zpos 1 -> 2
=> Plane A changed from on top, to below plane B: reset needed
Fixes: 38e0c3df6d ("drm/amd/display: Move PRIMARY plane zpos higher")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3569
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added a descriptor for the 'program_isharp_1dlut' parameter, which is a
flag used to determine whether to program the isharp 1D LUT.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/dpp/dcn401/dcn401_dpp_dscl.c:963: warning: Function parameter or struct member 'program_isharp_1dlut' not described in 'dpp401_dscl_program_isharp'
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
enable dpp rcg before we disable dppclk in hw_init cause system
hang/reboot
[How]
we remove dccg rcg related code from init into a separate function and
call it after we init pipe
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Qili Lu <qili.lu@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Function used to check the number of FEs connected to the current BE.
This was then used to determine if the symclk could be disabled, if
all FEs were disconnected. However, the function would skip over the
primary FE and return 0 when the primary FE was still connected. This
caused black screens on driver disable with an MST daisy chain hooked
up.
[How]
Refactor the function to correctly return the number of FEs connected
to the input BE. Also, rename it for clarity.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dc_state_destruct() nulls the resource context of the DC state. The pipe
context passed to dcn35_set_drr() is a member of this resource context.
If dc_state_destruct() is called parallel to the IRQ processing (which
calls dcn35_set_drr() at some point), we can end up using already nulled
function callback fields of struct stream_resource.
The logic in dcn35_set_drr() already tries to avoid this, by checking tg
against NULL. But if the nulling happens exactly after the NULL check and
before the next access, then we get a race.
Avoid this by copying tg first to a local variable, and then use this
variable for all the operations. This should work, as long as nobody
frees the resource pool where the timing generators live.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142
Fixes: 06ad7e1642 ("drm/amd/display: Destroy DC context while keeping DML and DML2")
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dc_state_destruct() nulls the resource context of the DC state. The pipe
context passed to dcn10_set_drr() is a member of this resource context.
If dc_state_destruct() is called parallel to the IRQ processing (which
calls dcn10_set_drr() at some point), we can end up using already nulled
function callback fields of struct stream_resource.
The logic in dcn10_set_drr() already tries to avoid this, by checking tg
against NULL. But if the nulling happens exactly after the NULL check and
before the next access, then we get a race.
Avoid this by copying tg first to a local variable, and then use this
variable for all the operations. This should work, as long as nobody
frees the resource pool where the timing generators live.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142
Fixes: 06ad7e1642 ("drm/amd/display: Destroy DC context while keeping DML and DML2")
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Tested-by: Raoul van Rüschen <raoul.van.rueschen@gmail.com>
Tested-by: Christopher Snowhill <chris@kode54.net>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Sefa Eyeoglu <contact@scrumplex.net>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake in a DRM_DEBUG_DRIVER message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit addresses a missing kdoc for the 'bs_coeffs_updated'
parameter in the 'dpp401_dscl_program_isharp' function. The
'bs_coeffs_updated' is a flag indicating whether the Blur and Scale
Coefficients have been updated.
The 'dpp401_dscl_program_isharp' function is responsible for programming
the isharp, which includes setting the isharp filter, noise gain, and
blur and scale coefficients. If the 'bs_coeffs_updated' flag is set to
true, the function updates the blur and scale coefficients.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/dpp/dcn401/dcn401_dpp_dscl.c:961: warning: Function parameter or struct member 'bs_coeffs_updated' not described in 'dpp401_dscl_program_isharp'
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Tom Chung <chiahsuan.chung@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PMO assumes that like timings can be synchronized, but DC only allows
this if the signal types match.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[what]
Graphics hang observed with 3 displays connected to DP2.0 mst dock.
[why]
There's a mismatch in dml and dc between the assignments of hpo link
encoders.
[how]
Add a new array in dml that tracks the current mapping of HPO stream
encoders to HPO link encoders in dc.
Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Gabe Teeger <Gabe.Teeger@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add interface for controlling shapness level input into DCN.
- Update SPL to support custom sharpness values.
- Add support for different sharpness values depending on YUV/RGB
content.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Signed-off-by: Relja Vojvodic <Relja.Vojvodic@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit f0b7dcf258.
It is causing graphics hangs.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Certain profiles have higher HDR multiplier than SDR boost max which
is not currently supported
[How]
Disable sharpness for these profiles
Fixes: 1b0ce903fe ("drm/amd/display: add improvements for text display and HDR DWM and MPO")
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To provide option to dpia control power management
[How]
By adding disable_usb4_pm_support bit field in dpia_debug option to
control dpia power management
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previous disable ODM policy due to underflow issue with sharpener.
Issue is resolved after updating sharpening policy to apply to
both windowed and fullscreen video
[How]
Remove sharpness check disabling Dynamic ODM policy
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Backlight updates require aux and/or register access. Therefore, driver
needs to disallow IPS beforehand.
So, acquire the dc lock before calling into dc to update backlight - we
should be doing this regardless of IPS. Then, while the lock is held,
disallow IPS before calling into dc, then allow IPS afterwards (if it
was previously allowed).
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some asserts are always hit on startup/Pnp when they should only be used
to indicate when something has gone wrong.
[How]
Ignore result of getting function from bios cmd table for newer asics.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Daniel Sa <Daniel.Sa@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Setting min dispclk to 50Mhz outside clock lowering function causes
unnecessary calls to SMU to lower dispclk and causes dentist hangs when
there is no stream on the pipes.
[How]
Move the set minimum dispclk logic inside the lowering dispclk if
statement.
Fixes: 2344413205 ("DCN35 set min dispclk to 50Mhz")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN IPS interoperates with other system idle power features, such as
Zstates.
On DCN35, there is a known issue where system Z8 + DCN IPS2 causes a
hard hang. We observe this on systems where the SBIOS allows Z8.
Though there is a SBIOS fix, there's no guarantee that users will get it
any time soon, or even install it. A workaround is needed to prevent
this from rearing its head in the wild.
[How]
For DCN35, check the pmfw version to determine whether the SBIOS has the
fix. If not, set IPS1+RCG as the deepest possible state in all cases
except for s0ix and display off (DPMS). Otherwise, enable all IPS
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
It is to fix in try_disable_dsc() due to misrevert of
commit 338567d176 ("drm/amd/display: Fix MST BW calculation Regression")
[How]
Fix restoring minimum compression bw by 'max_kbps', instead of native bw 'stream_kbps'
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of just smashing jiffies into a GUID, use guid_gen() to generate
RFC 4122 compliant GUIDs.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812122312.1567046-3-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The kernel has a guid_t type for GUIDs. Switch to using it, but avoid
any functional changes here.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812122312.1567046-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Remove unnecessary TODO from spl_os_types.h
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use appropriate SPDX copyright for spl_os_types.h
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following fixes:
- Fix MS/MP mismatches in dml21 for dcn401
- Resolved Coverity issues
- Add back quality EASF and ISHARP and dc dependency changes
- Add sharpness support for windowed YUV420 video
- Add improvements for text display and HDR DWM and MPO
- Fix Synaptics Cascaded Panamera DSC Determination
- Allocate DCN35 clock table transfer buffers in GART
- Add Replay Low Refresh Rate parameters in dc type
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previous only applied sharpness for fullscreen YUV420 video.
[How]
Remove fullscrene restriction and apply sharpness for windowed
YUV420 video as well.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Tune settings for improved text display.
Handle differences between DWM and MPO in HDR path.
[How]
Update sharpener LBA table.
Use HDR multiplier to calculate scalar matrix coefficients
for HDR RGB MPO path.
Update unit tests.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Why:
To supported Low Refresh Rate panel for Replay Feature,
Adding some parameters to record Low Refresh Rate information.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Dennis Chan <dennis.chan@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Addressed previous issues with quality changes and new issues due to
rolling back quality changes.
[How]
This reverts commit f9e6759888, fixes merge conflicts, and fixed some
formatting errors.
Store current sharpness level for each pregen table to minimize
calculating sharpness table every time.
Disable dynamic ODM when sharpness is enabled.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want to avoid arming the HPD timer in firmware when preparing for
S0i3 entry when DC is considered in D3.
[How]
Notify DMCUB of the power state transitions so it can decide to arm
the HPD timer for idle in DCN35 only in D0.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Synaptics Cascaded Panamera topology needs to unconditionally
acquire root aux for dsc decoding.
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Because sometime DMUB GPINT will time out,
it will cause we return 0 as residency number.
[How]
Retry to avoid this happened.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: ChunTao Tso <ChunTao.Tso@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Request from PMFW to use GART for clock table transfer tables as
framebuffer is being deprecated on APU.
[How]
Switch over to GART via the allocation flag.
Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
translate_by_source need not be set for DCN401 onwards since cursor
cursor composition comes after scaler in the hardware pipeline.
Hence offset calculation has been reworked, and this setting is not
necessary to be enabled anymore.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Remove coverity issues that were originally ignored.
[HOW]
Ran coverity locally on driver, used output report to find existing
coverity issues, resolved them
Reviewed-by: Nicholas Choi <nicholas.choi@amd.com>
Signed-off-by: Daniel Sa <Daniel.Sa@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Prefetch calculations did not guarantee that bandwidth required in
mode support was less than mode programming which can cause failures.
[HOW]
Fix bandwidth calculations to assume fixed times for OTO schedule,
and choose which schedule to use based on time to fetch pixel data.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Before every full update we must wait for all pending updates to be
cleared - this is particularly important for minimal transitions
because if we don't wait for pending cleared, it will be as if
there was no minimal transition at all. In OTG we must read 3 different
status registers for pending cleared, one specifically for OTG updates,
one specifically for OPTC updates, and the last for surface related
updates
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
post_divider_value should not be 0.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ahmed, Muhammad <Ahmed.Ahmed@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Skipping clock updates is not a hard requirement for overclocking
and only an optimization. Remove the skip as this can cause issues
for FAMS transitions during the overclock sequence. If FAMS
is enabled we must disable UCLK switch on any full update (which
requires update clocks to be called).
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Idle power states (IPS) describe levels of power-gating within DCN. DM
and DC is responsible for ensuring that we are out of IPS before any DCN
programming happens. Any DCN programming while we're in IPS leads to
undefined behavior (mostly hangs).
Because IPS intersects with all display features, the ability to disable
IPS by default while ironing out the known issues is desired. However,
disabing it completely will cause important features such as s0ix entry
to fail.
Therefore, more granular IPS debug flags are desired.
[How]
Extend the dc debug mask bits to include the available list of IPS
debug flags.
All the flags should work as documented, with the exception of
IPS_DISABLE_DYNAMIC. It requires dm changes which will be done in
later changes.
v2: enable docs and fix docstring format
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ideally, we want to drop the legacy vblank enable for older ASICs. This
should be possible now, since we can now specify how many frames we need
to wait before disabling vblanking instead of being forced to either
choose between no delay (which can still be buggy) and
drm_vblank_offdelay (which is much longer by default than is required on
AMD hardware).
Suggested-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240822161856.174600-4-hamza.mahfooz@amd.com
Ideally, we want to enable immediate vblank disable, when possible and
we should be able to do so on DCN35+, if PSR isn't supported by a given
CRTC.
Suggested-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240822161856.174600-3-hamza.mahfooz@amd.com
Hook up drm_crtc_vblank_on_config() in amdgpu_dm. So, that we can enable
PSR and other static screen optimizations more quickly, while avoiding
stuttering issues that are accompanied by the following dmesg error:
[drm:dc_dmub_srv_wait_idle [amdgpu]] *ERROR* Error waiting for DMUB idle: status=3
This also allows us to mimic how vblanking is handled by the Windows
amdgpu driver. Specifically, we wait two idle frames before disabling
the vblank timer there.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240822161856.174600-2-hamza.mahfooz@amd.com
Instead of using state->fb->obj[0] directly, get object from framebuffer
by calling drm_gem_fb_get_obj() and return error code when object is
null to avoid using null object of framebuffer.
Fixes: 5d945cbcd4 ("drm/amd/display: Create a file dedicated to planes")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The sparse tool complains as follows:
drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dcn401/dcn401_dsc.c:30:24: warning:
symbol 'dcn401_dsc_funcs' was not declared. Should it be static?
This symbol is not used outside of dcn401_dsc.c, so marks it static.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The sparse tool complains as follows:
drivers/gpu/drm/amd/amdgpu/../display/dc/hubp/dcn35/dcn35_hubp.c:191:19: warning:
symbol 'dcn35_hubp_funcs' was not declared. Should it be static?
This symbol is not used outside of dcn35_hubp.c, so marks it static.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The sparse tool complains as follows:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4.c:12:28: warning:
symbol 'core_dcn4_ip_caps_base' was not declared. Should it be static?
This symbol is not used outside of dcn35_hubp.c, so marks it static.
And do not want to change it, so mark it const.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The sparse tool complains as follows:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:6853:56: warning:
symbol 'core_dcn4_g6_temp_read_blackout_table' was not declared. Should it be static?
This symbol is not used outside of dml2_core_dcn4_calcs.c, so marks it static.
And not want to change it, so mark it const.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Various DML 2.1 fixes
- Fix module unload
- Fix construct_phy with MXM connector
- Support UHBR10 link rate on eDP
- Revert updated DCCG wrappers
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why and How]
DML2.1 reintegration for several fixes and updates to the DML
code.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Roman Li <roman.li@amd
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Causes hard hangs when resuming after display off on extended/duplicate
modes
[How]
Set the min dispclk to 50Mhz for DCN35
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
The call to construct_phy will fail in cases where connector type is
MXM, and the dc_link won't be properly created/initialized.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Supporting UHBR10 link rate on eDP leverages
the existing DP2.0 code but need to add some small
adjustments in code.
[how]
Acknowledge the given DPCD caps for UHBR10
link rate support and allow DP2.0 programming
sequence and link training for eDP.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Sung Joon Kim <Sungjoon.Kim@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
DCN4 Cursor has separate degamma block and should always
do Cursor degamma for Cursor color modes.
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
eDP 2.0 is introducing support for UHBR link rates, however current eDP ILR
link optimization does not account for UHBR capabilities.
Either UHBR capabilities will be provided via the same 128b/132b rate DPCD caps
that are currently used on DP2.1, or Table 4-13 may be updated to include UHBR
rates.
[HOW]
Add extra Supported Link Rates table translations for UHBR10/13.5/20.
Update eDP link setting optimization search to be aware of 128b/132b DPCD
rate caps in order to unblock UHBR on panels with Supported Link Rates table.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Removing redundant condition.
Reviewed-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Previous multi-display HPO fix moved where HPO I/O enable/disable is performed.
The codepath now taken to enable/disable HPO I/O is not used for compliance
test automation, meaning that if a compliance box being driven at a DP1 rate
requests retrain at UHBR, HPO I/O will remain off if it was previously off.
[HOW]
Explicitly update HPO I/O after allocating encoders for test request.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Revert updated DCCG wrappers due to regression
[How]
This reverts commit 680458d41a.
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
When the commit 9d84c7ef8a ("drm/amd/display: Correct cursor position
on horizontal mirror") was introduced, it used the wrong calculation for
the position copy for X. This commit uses the correct calculation for that
based on the original patch.
Fixes: 9d84c7ef8a ("drm/amd/display: Correct cursor position on horizontal mirror")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8f9b23abba)
Cc: stable@vger.kernel.org
[why & how]
Cursor gets clipped off in the middle of the screen with hw
rotation 180. Fix a miscalculation of cursor offset when it's
placed near the edges in the pipe split case.
Cursor bugs with hw rotation were reported on AMD issue
tracker:
https://gitlab.freedesktop.org/drm/amd/-/issues/2247
The issues on rotation 270 was fixed by:
https://lore.kernel.org/amd-gfx/20221118125935.4013669-22-Brian.Chang@amd.com/
that partially addressed the rotation 180 too. So, this patch is the
final bits for rotation 180.
Reported-by: Xaver Hugl <xaver.hugl@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2247
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 9d84c7ef8a ("drm/amd/display: Correct cursor position on horizontal mirror")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1fd2cf0900)
Cc: stable@vger.kernel.org
[Why]
Tiled display cannot synchronize properly after S3.
The fix for commit 5f0c749158 ("drm/amd/display: Fix for otg
synchronization logic") is not enable in DCN321, which causes
the otg is excluded from synchronization.
[How]
Enable otg synchronization logic in dcn321.
Fixes: 5f0c749158 ("drm/amd/display: Fix for otg synchronization logic")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Loan Chen <lo-an.chen@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d6ed53712f)
Cc: stable@vger.kernel.org
To be able to get to the lowest power state when suspending systems with
DCN3.5+, we must be in IPS before the display hardware is put into
D3cold. So, to ensure that the system always reaches the lowest power
state while suspending, force systems that support IPS to enter idle
optimizations before entering D3cold.
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 237193e21b)
Cc: stable@vger.kernel.org # 6.10+
The descriptor for `hwss_wait_for_all_blank_complete` was previously
misaligned with the actual implementation. This commit refines the
descriptor to reflect the implementation of
`hwss_wait_for_all_blank_complete`
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_hw_sequencer.c:991: warning: expecting prototype for hwss_wait_for_blank_complete(). Prototype was for hwss_wait_for_all_blank_complete() instead
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix some cursor issue
- Fix print format specifiers in DC_LOG_IPS
- Fix minor coding errors in dml21 phase 5
- Fix MST BW calculation Regression
- Improve FAM control for DCN401
- Add null pointer checks for some code
- Refactor 3DLUT for non-DMA
- Optimize vstartup position for AS-SDP
- Update to using new dccg callbacks
- Enable otg synchronization logic for DCN321
- Disable DCN401 UCLK P-State support on full updates
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Remove unnecessary call to REG_SEQ_SUBMIT and REG_SEQ_WAIT_DONE, since
those macros are not necessary anymore at the dpp1 set degamma. Those
are part of an old implementation.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
When the commit 9d84c7ef8a ("drm/amd/display: Correct cursor position
on horizontal mirror") was introduced, it used the wrong calculation for
the position copy for X. This commit uses the correct calculation for that
based on the original patch.
Fixes: 9d84c7ef8a ("drm/amd/display: Correct cursor position on horizontal mirror")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Cursor gets clipped off in the middle of the screen with hw
rotation 180. Fix a miscalculation of cursor offset when it's
placed near the edges in the pipe split case.
Cursor bugs with hw rotation were reported on AMD issue
tracker:
https://gitlab.freedesktop.org/drm/amd/-/issues/2247
The issues on rotation 270 was fixed by:
https://lore.kernel.org/amd-gfx/20221118125935.4013669-22-Brian.Chang@amd.com/
that partially addressed the rotation 180 too. So, this patch is the
final bits for rotation 180.
Reported-by: Xaver Hugl <xaver.hugl@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2247
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 9d84c7ef8a ("drm/amd/display: Correct cursor position on horizontal mirror")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
When the commit 5324e2b205 ("drm/amd/display: Add driver support for
future FAMS versions") was introduced, it missed some of the FAM2 code.
This commit introduces the code that control the FAM enable and disable.
Fixes: 5324e2b205 ("drm/amd/display: Add driver support for future FAMS versions")
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Remove force_backlight_start_level since it is never used.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Tiled display cannot synchronize properly after S3.
The fix for commit 5f0c749158 ("drm/amd/display: Fix for otg
synchronization logic") is not enable in DCN321, which causes
the otg is excluded from synchronization.
[How]
Enable otg synchronization logic in dcn321.
Fixes: 5f0c749158 ("drm/amd/display: Fix for otg synchronization logic")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Loan Chen <lo-an.chen@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
this is to remove redundant msg to pmfw at boot/resume
since bios already power up dcn.
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Set max VTotal cap for dcn401 because VTotal
register is only 16 bits wide on dcn401.
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
In certain scenarios DC can internally trigger back to back full updates
which will miss some required programming that is normally deferred
until post update via optimize_bandwidth.
[HOW]
In back to back update scenarios, wait for pending updates to complete
and perform any strictly required outstanding programming.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
It is not guaranteed even for HW exclusive P-State methods (like
VActive) that P-state will be supported properly until optimize
bandwidth is called, so unconditionally disable it on full updates.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Stream ID's associated with phantom pipes can change often as they
are reconstructed on full updates, however they can remain identical
depending on the required update.
[HOW]
In the case phantom streams and pipe topologies remain the same
between updates, mark the transition as seamless.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds a null check for the 'afb' variable in the
amdgpu_dm_plane_handle_cursor_update function. Previously, 'afb' was
assumed to be null, but was used later in the code without a null check.
This could potentially lead to a null pointer dereference.
Changes since v1:
- Moved the null check for 'afb' to the line where 'afb' is used. (Alex)
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1298 amdgpu_dm_plane_handle_cursor_update() error: we previously assumed 'afb' could be null (see line 1252)
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Co-developed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In current design, the vstartup position is adjusted to
vblank start position when AS-SDP is enabled.
However when the vblank length is too big, it may over
vstartup boundary.
[How]
To adjust vstartup position to 1 line before vsync position.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
%d specifier is used for printing unsigned values.
It can result in negative values in logs for unsigned variables.
[How]
Replace %d with %u for unsigned.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Make sure plane_state is not null before calling a function
that dereferences it. Besides, remove redundant codes.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Change the order of the pipe_ctx->plane_state check to ensure that
plane_state is not null before accessing it.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
HW removed this w/a, but we will still keep it to avoid regression.
but return in test mode.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
print additional info for MALL related calculations and DMCUB messaging
to aid debugging.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why and how]
Update to using new dccg callbacks
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DML21 does not allocate DET evenly between pipes.
May result in underflow when unlocking the pipes as DET could
be overallocated.
[How]
1. Unlock pipes that have a decreased amount of DET allocation
2. Wait for the double buffer to be updated.
3. Unlock the remaining pipes.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
dc->clk_mgr is null checked previously in the same function, indicating
it might be null.
Passing "dc" to "dc->hwss.apply_idle_power_optimizations", which
dereferences null "dc->clk_mgr". (The function pointer resolves to
"dcn35_apply_idle_power_optimizations".)
This fixes 1 FORWARD_NULL issue reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently the handling for 3DLUT is found in multiple different
places, which causes issues when the different functions are not
in sync with each other.
Frequently bugs occur because the LUT handling is broken up, and
what has already been handled isn't kept track of well, which can
cause earlier changes to the LUT params to be overridden.
[How]
Remove DMA LUT handling from DCN401 and refactor legacy LUT
handling in one place to make it easier to keep track of what has
and needs to be done.
Reviewed-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Signed-off-by: Relja Vojvodic <Relja.Vojvodic@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Based on power measurement result, in most cases when display clock
is higher than Vmin display clock, lowering display clock using
dynamic ODM will improve overall power consumption by 0 to 4 watts
even if we can't reach Vmin.
[how]
Allow vmin optimization applied even if dispclk can't reach Vmin.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
There is a coding error which causes incorrect variables to be assigned
in DML21 phase 5.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds a null check for the 'afb' variable in the
amdgpu_dm_update_cursor function. Previously, 'afb' was assumed to be
null at line 8388, but was used later in the code without a null check.
This could potentially lead to a null pointer dereference.
Changes since v1:
- Moved the null check for 'afb' to the line where 'afb' is used. (Alex)
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:8433 amdgpu_dm_update_cursor()
error: we previously assumed 'afb' could be null (see line 8388)
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Co-developed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Multiple files in amdgpu call amdgpu_ucode_request() with a fw_name
variable that the compiler cannot check for being a valid format string,
as seen by enabling the (default-disabled) -Wformat-security option:
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c: In function 'amdgpu_mes_init_microcode':
drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1517:61: error: format not a string literal and no format arguments [-Werror=format-security]
1517 | r = amdgpu_ucode_request(adev, &adev->mes.fw[pipe], fw_name);
| ^~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c: In function 'amdgpu_uvd_sw_init':
drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c:263:9: error: format not a string literal and no format arguments [-Werror=format-security]
263 | r = amdgpu_ucode_request(adev, &adev->uvd.fw, fw_name);
| ^
drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c: In function 'amdgpu_vce_sw_init':
drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c:161:9: error: format not a string literal and no format arguments [-Werror=format-security]
161 | r = amdgpu_ucode_request(adev, &adev->vce.fw, fw_name);
| ^
drivers/gpu/drm/amd/amdgpu/amdgpu_umsch_mm.c: In function 'amdgpu_umsch_mm_init_microcode':
drivers/gpu/drm/amd/amdgpu/amdgpu_umsch_mm.c:590:9: error: format not a string literal and no format arguments [-Werror=format-security]
590 | r = amdgpu_ucode_request(adev, &adev->umsch_mm.fw, fw_name);
| ^
drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c: In function 'amdgpu_cgs_get_firmware_info':
drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c:417:72: error: format not a string literal and no format arguments [-Werror=format-security]
417 | err = amdgpu_ucode_request(adev, &adev->pm.fw, fw_name);
| ^~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c: In function 'load_dmcu_fw':
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:2221:9: error: format not a string literal and no format arguments [-Werror=format-security]
2221 | r = amdgpu_ucode_request(adev, &adev->dm.fw_dmcu, fw_name_dmcu);
| ^
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c: In function 'dm_init_microcode':
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:5147:9: error: format not a string literal and no format arguments [-Werror=format-security]
5147 | r = amdgpu_ucode_request(adev, &adev->dm.dmub_fw, fw_name_dmub);
| ^
Change these all to use a "%s" format with the actual name as an argument,
to let the compiler prove this to be correct.
Fixes: e5a7d047f4 ("drm/amd: Use `amdgpu_ucode_*` helpers for CGS")
Fixes: 52215e2a5d ("drm/amd: Use `amdgpu_ucode_*` helpers for VCE")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are a several statements with two following semicolons, replace
these with just one semicolon.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To be able to get to the lowest power state when suspending systems with
DCN3.5+, we must be in IPS before the display hardware is put into
D3cold. So, to ensure that the system always reaches the lowest power
state while suspending, force systems that support IPS to enter idle
optimizations before entering D3cold.
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a callback that program the DET segment when initializing pipes.
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e1dbe625d6)
Include display_mode_vba_314 and display_rq_dlg_calc_314 to the dml
Makefile.
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 089525632d)
Initialize the field dcc_meta_propagation_delay_us with 10 ms.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 74bad61c5d)
The commit 5034b935f6 ("drm/amd/display: Modify DHCUB waterwark
structures and functions") introduced a code refactor for DCHUB, but
during the merge process into amd-staging-drm-next, the program det
segments were removed. This commit adds the DET segment programming for
DCN35.
Fixes: 5034b935f6 ("drm/amd/display: Modify DHCUB waterwark structures and functions")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 675d9ac9d0)
In the commit c2cec7a872b6 ("drm/amd/display: Wake DMCUB before sending
a command for replay feature"), replaced dm_execute_dmub_cmd with
dc_wake_and_execute_dmub_cmd in multiple areas, but due to merge issues
the replacement of this function in the dmub_replay_copy_settings was
missed. This commit replaces the old dm_execute_dmub_cmd with
dc_wake_and_execute_dmub_cmd.
Fixes: 3601a35a2e ("drm/amd/display: Wake DMCUB before sending a command for replay feature")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6cc213b9aa)
This version brings along following fixes:
- Clean up some files style problems
- Program the DET segment when initializing pipes in dcn10_hwseq
- Fix overlay with pre-blend color processing
- Disable SubVP if Hardware Rotation is Used
- Fix few things in DML
- Re-enable panel replay feature
- Fix null pointer dereference under mst+dsc setup
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
When DRR is active with variable refresh rate, add the ability to block DRR
clamped P-State strategies (such as SubVP).
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit a15268787b ("drm/amd/display: Avoid overflow assignment in link_dp_cts")
Due to regression causing DPMS hang.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Gabe Teeger <Gabe.Teeger@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Add clock source selection control functions based on spec
Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Coverity picks up a defect with regards to array underflow.
[How]
Address coverity issue as recommended.
Reviewed-by: Leo Ma <hanghong.ma@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add a dc debug option to keep crtc on when ips switch.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Fudong Wang <Fudong.Wang@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Add clock source selection an control functions based on spec
Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Fixed the replay issues and now re-enable the panel replay feature.
Reported-by: Arthur Borsboom <arthurborsboom@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3344
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Currently TR0 (trip 0) is not properly budgeting for urgent latency in
DML2.1. This results in overly aggressive prefetch schedules that are
vulnerable to request return jitter, resulting in severe underflow at
the start of the frame.
[HOW]
Forcing 3DLUT DMA check to enable causes urgent latency to be budgeted
properly into the prefetch schedule, avoiding the vulnerability.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Cursor size can change dynamically at runtime without re-validation,
so DML should calculate with the max size cursor to cover all cases.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why and How]
SubVP is not supported when hardware rotation is being used
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Under autonomous mode, source reads dpcd DP_PCON_HDMI_POST_FRL_STATUS
for the frl link status.
Without dsc passthrough, it serves as bw bottleneck on the entire link,
compared with the dp link from source to the converter where dsc is
available.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Add new stream and char control functions based on DCCG spec
Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Overlay works similarly to MPO, but uses global alpha on both planes and
sets the desktop as the rear plane instead of the front plane
[HOW]
Ensure that top plane isn't overlay by checking global alpha before
applying the previously added MPO fix
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a callback that program the DET segment when initializing pipes.
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Identify few unused fileds in dc_caps. Remove them.
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop coasting_vtotal_high and pad from dmub_cmd_update_dirty_rect_data,
since it is not used.
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove __cplusplus defines added by accident.
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove some useless lines from DC Makefiles.
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Include display_mode_vba_314 and display_rq_dlg_calc_314 to the dml
Makefile.
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds a null check for the set_output_gamma function pointer
in the dcn32_set_output_transfer_func function. Previously,
set_output_gamma was being checked for null, but then it was being
dereferenced without any null check. This could lead to a null pointer
dereference if set_output_gamma is null.
To fix this, we now ensure that set_output_gamma is not null before
dereferencing it. We do this by adding a null check for set_output_gamma
before the call to set_output_gamma.
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds a null check for the set_output_gamma function pointer
in the dcn401_set_output_transfer_func function. Previously,
set_output_gamma was being checked for null, but then it was being
dereferenced without any null check. This could lead to a null pointer
dereference if set_output_gamma is null.
To fix this, we now ensure that set_output_gamma is not null before
dereferencing it. We do this by adding a null check for set_output_gamma
before the call to set_output_gamma.
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds a null check for the set_output_gamma function pointer
in the dcn20_set_output_transfer_func function. Previously,
set_output_gamma was being checked for null at line 1030, but then it
was being dereferenced without any null check at line 1048. This could
potentially lead to a null pointer dereference error if set_output_gamma
is null.
To fix this, we now ensure that set_output_gamma is not null before
dereferencing it. We do this by adding a null check for set_output_gamma
before the call to set_output_gamma at line 1048.
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit corrects the function comment for
'dpp401_dscl_program_isharp' in 'dcn401_dpp_dscl.c'. The comment
previously included a description for a non-existent parameter
'bs_coeffs_updated'. This parameter description has been removed to
reflect the function's actual parameters.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/dpp/dcn401/dcn401_dpp_dscl.c:981: warning: Excess function parameter 'bs_coeffs_updated' description in 'dpp401_dscl_program_isharp'
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds a null check for 'stream_status' in the function
'planes_changed_for_existing_stream'. Previously, the code assumed
'stream_status' could be null, but did not handle the case where it was
actually null. This could lead to a null pointer dereference.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:3784 planes_changed_for_existing_stream() error: we previously assumed 'stream_status' could be null (see line 3774)
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following:
- SPL improvements.
- Address coverity issues.
- DML2 fixes.
- Code cleanup.
- DIO and DCCG refactor.
- Improve the PSR state.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove function pointers that were never used.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initialize the field dcc_meta_propagation_delay_us with 10 ms.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCN_MINIMUM_DISPCLK_Khz and DCN_MINIMUM_DPPCLK_Khz is declared twice.
This commit removes that duplication.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The commit 5034b935f6 ("drm/amd/display: Modify DHCUB waterwark
structures and functions") introduced a code refactor for DCHUB, but
during the merge process into amd-staging-drm-next, the program det
segments were removed. This commit adds the DET segment programming for
DCN35.
Fixes: 5034b935f6 ("drm/amd/display: Modify DHCUB waterwark structures and functions")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
P-State force programming is handled entirely by FW in FAMS2. Remove
any programming from driver side to prevent incorrect programming from
driver side (which may override FW programming)
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Cursor position code had improper offsets in scaled modes.
[HOW]
Adjust cursor scaling to account for cursor offsets properly.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Sung Lee <sunglee@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the commit c2cec7a872b6 ("drm/amd/display: Wake DMCUB before sending
a command for replay feature"), replaced dm_execute_dmub_cmd with
dc_wake_and_execute_dmub_cmd in multiple areas, but due to merge issues
the replacement of this function in the dmub_replay_copy_settings was
missed. This commit replaces the old dm_execute_dmub_cmd with
dc_wake_and_execute_dmub_cmd.
Fixes: 3601a35a2e ("drm/amd/display: Wake DMCUB before sending a command for replay feature")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SPL has a control field for controlling the two pixels per container
that is not in use yet. This commit adds a proper initialization for
this feature.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the lb_memory_config close to the pixel format enums to improve the
code readability.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The link index wasn't updated for the AUX reply notification. Get link
index based on DPIA instance for AUX reply notification.
Signed-off-by: Cruise <Cruise.Hung@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CalculateSwathAndDETConfiguration_params_st's UnboundedRequestEnabled is
a pointer (i.e. dml_bool_t *UnboundedRequestEnabled), and thus
p->UnboundedRequestEnabled checks its address, not bool value.
To check value, *p->UnboundedRequestEnabled is used instead.
This fixes 1 REVERSE_INULL issue reported by Coverity.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
In dcn401 we read clock values before FW is loaded. These incorrect
values cause the driver to believe that we are running higher clocks
than what we actually have. This then causes corruption/underflow for
the eGPU.
[HOW]
When new values are read from HW, update internal structures to
propagate the new/correct value. Fixes issue
Signed-off-by: Daniel Sa <Daniel.Sa@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Aux transfer retries path does not support dp tunneling.
[How]
Based on ddc pin check, aux will be issued in legacy path or DMUB.
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Reviewed-by: Eric Yang <eric.yang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This just standardizes the use of MIN() and MAX() macros, with the very
traditional semantics. The goal is to use these for C constant
expressions and for top-level / static initializers, and so be able to
simplify the min()/max() macros.
These macro names were used by various kernel code - they are very
traditional, after all - and all such users have been fixed up, with a
few different approaches:
- trivial duplicated macro definitions have been removed
Note that 'trivial' here means that it's obviously kernel code that
already included all the major kernel headers, and thus gets the new
generic MIN/MAX macros automatically.
- non-trivial duplicated macro definitions are guarded with #ifndef
This is the "yes, they define their own versions, but no, the include
situation is not entirely obvious, and maybe they don't get the
generic version automatically" case.
- strange use case #1
A couple of drivers decided that the way they want to describe their
versioning is with
#define MAJ 1
#define MIN 2
#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN)
which adds zero value and I just did my Alexander the Great
impersonation, and rewrote that pointless Gordian knot as
#define DRV_VERSION "1.2"
instead.
- strange use case #2
A couple of drivers thought that it's a good idea to have a random
'MIN' or 'MAX' define for a value or index into a table, rather than
the traditional macro that takes arguments.
These values were re-written as C enum's instead. The new
function-line macros only expand when followed by an open
parenthesis, and thus don't clash with enum use.
Happily, there weren't really all that many of these cases, and a lot of
users already had the pattern of using '#ifndef' guarding (or in one
case just using '#undef MIN') before defining their own private version
that does the same thing. I left such cases alone.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add new enable and disable functions based on DCCG spec.
Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
It's currently hard coded to 256 when it should be using the SOC
provided values. This can result in corruption with linear surfaces
where we prefetch more PTE than the buffer can hold.
[How]
Update the min page size correctly for the plane.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Variables, used as denominators and maybe not assigned to other values,
should not be 0. bytes_per_element_y & bytes_per_element_c are
initialized by get_bytes_per_element() which should never return 0.
This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Functions get_per_method_common_meta and get_expanded_strategy_list can
return null and thus it is necessary to check their returned values
before dereferencing.
This fixes 3 NULL_RETURNS issues reported by Coverity.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The DP tunnel AUX reply is received through Outbox1. Print the Outbox1
status if an issue occurs.
Signed-off-by: Cruise <Cruise.Hung@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new enable and disable functions based on DCCG spec.
Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sampling_rate is an uint8_t but is assigned an unsigned int, and thus it
can overflow. As a result, sampling_rate is changed to uint32_t.
Similarly, LINK_QUAL_PATTERN_SET has a size of 2 bits, and it should
only be assigned to a value less or equal than 4.
This fixes 2 INTEGER_OVERFLOW issues reported by Coverity.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to use cm3_helper function with DCN401 to avoid cases where high
RGB component values can get set to zero if using the TF curve generated
by cm_helper.
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When pre-OS firmware enables display support for displays that operate
the DIG in 2 pixels per cycle processing modes the inferred pixel rate
from get_pixel_clk_frequency_100hz does not account for the true pixel
rate since we're outputting 2 per cycle past the stream encoder.
This causes seamless boot validation to abort early.
[How]
Add a new stream encoder function for getting pixels per cycle from the
stream encoder. If the pixels per cycle is greater than 1 and the driver
policy is to enable 2 pixels per cycle for post-OS then allow seamless
boot to continue.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
After resume the system, the new_crtc_state->vrr_infopacket does not
synchronize with the current state. It will affect the
update_freesync_state_on_stream() does not update the state correctly.
The previous patch causes a PSR SU regression that cannot let panel go
into self-refresh mode.
[How]
Reset the VRR config during resume to force update the VRR config later.
Fixes: eb6dfbb7a9 ("drm/amd/display: Reset freesync config before update new state")
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add a missing PSR state to make the dmub_psr_get_state() return a
correct PSR state.
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
dmubfw added a new event type, update amdgpu to avoid "notify type 6
invalid"
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
immediate_disable_crtc does not reset ODM. if switching to disable_crtc
which will disable ODM as well. i.e. need to restore ODM mem cfg at
reenable it at end of w/a.
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Xi (Alex) Liu <xi.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
dc_state_get_stream_status can return null, and therefore null must be
checked before stream_status is used.
This fixes 1 NULL_RETURNS issue reported by Coverity.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
dc_link is null checked previously in the same function, indicating it
might be null as reported by Coverity.
This fixes 1 FORWARD_NULL issue reported by Coverity.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
Integer multiplies integer may overflow in context that expects an
expression of unsigned long long (64 bits). This can be fixed by casting
integer to unsigned long long to force 64 bits results.
This fixes 2 OVERFLOW_BEFORE_WIDEN issues reported by Coverity.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use debug option for disabling unbounded req in DML21
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Austin Zheng <Austin.Zheng@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Moved files to respective folders to improve DIO code.
Signed-off-by: Bhuvanachandra Pinninti <bpinnint@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If we aren't entering RCG/IPS2 or CLKSTOP is not supported by PMFW then
we should be requesting a dispclk value of 0MHz to PMFW.
Currenly we run at max clock since there's an assumption in APU clock
table formulation where we can run at any DISPCLK at any state so the
real clock value ends up as 1200Mhz - the maximum.
[How]
Set to 0 instead of the minimum value in the state array.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When only 4 I2C is declared, two dummies are required to correctly map
GPIO port.
[How]
Add one more I2C dummy entry to match GPIO port.
Signed-off-by: Chris Park <chris.park@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
1. After allowing idle optimizations, hw programming is disallowed.
2. Before hw programming, we need to disallow idle optimizations.
Otherwise, in scenario 1, we will immediately kick hw out of idle
optimizations with register access.
Scenario 2 is less of a concern, since any register access will kick
hw out of idle optimizations. But we'll do it early for correctness.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We manage interrupts for CRTCs in two places:
1. In manage_dm_interrupts(), when CRTC get enabled or disabled
2. When drm_vblank_get/put() starts or kills the vblank counter, calling
into amdgpu_dm_crtc_set_vblank()
The interrupts managed by these twp places should be identical.
[How]
Since manage_dm_interrupts() already use drm_crtc_vblank_on/off(), just
move all CRTC interrupt management into amdgpu_dm_crtc_set_vblank().
This has the added benefit of disabling all CRTC and HUBP interrupts
when there are no vblank requestors.
Note that there is a TODO item - unchanged from when it was first
introduced - to properly identify the HUBP instance from the OTG
instance, rather than just assume direct mapping.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Seeing several regressions related to quality EASF and ISHARP changes
and removing dc dependency changes.
[How]
Roll back SPL changes
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit addresses a null pointer dereference issue in the
`commit_planes_for_stream` function at line 4140. The issue could occur
when `top_pipe_to_program` is null.
The fix adds a check to ensure `top_pipe_to_program` is not null before
accessing its stream_res. This prevents a null pointer dereference.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4140 commit_planes_for_stream() error: we previously assumed 'top_pipe_to_program' could be null (see line 3906)
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit addresses a null pointer dereference issue in the
`dcn20_program_pipe` function. The issue could occur when
`pipe_ctx->plane_state` is null.
The fix adds a check to ensure `pipe_ctx->plane_state` is not null
before accessing. This prevents a null pointer dereference.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn20/dcn20_hwseq.c:1925 dcn20_program_pipe() error: we previously assumed 'pipe_ctx->plane_state' could be null (see line 1877)
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use existing swap() function rather than duplicating its implementation.
./drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_pmo/dml2_pmo_dcn3.c:17:29-30: WARNING opportunity for swap().
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9573
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake in a dml2_printf message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the DML math_ceil2 function, there is one ASSERT if the significance
is equal to zero. However, significance might be equal to zero
sometimes, and this is not an issue for a ceil function, but the current
ASSERT will trigger warnings in those cases. This commit removes the
ASSERT if the significance is equal to zero to avoid unnecessary noise.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 332315885d)
[why & how]
Need to make sure plane_state is initialized
before accessing its members.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Xi (Alex) Liu <xi.liu@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 295d91cbc7)
This commit adds a null check for the set_output_gamma function pointer
in the dcn30_set_output_transfer_func function. Previously,
set_output_gamma was being checked for nullity at line 386, but then it
was being dereferenced without any nullity check at line 401. This
could potentially lead to a null pointer dereference error if
set_output_gamma is indeed null.
To fix this, we now ensure that set_output_gamma is not null before
dereferencing it. We do this by adding a nullity check for
set_output_gamma before the call to set_output_gamma at line 401. If
set_output_gamma is null, we log an error message and do not call the
function.
This fix prevents a potential null pointer dereference error.
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:401 dcn30_set_output_transfer_func()
error: we previously assumed 'mpc->funcs->set_output_gamma' could be null (see line 386)
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c
373 bool dcn30_set_output_transfer_func(struct dc *dc,
374 struct pipe_ctx *pipe_ctx,
375 const struct dc_stream_state *stream)
376 {
377 int mpcc_id = pipe_ctx->plane_res.hubp->inst;
378 struct mpc *mpc = pipe_ctx->stream_res.opp->ctx->dc->res_pool->mpc;
379 const struct pwl_params *params = NULL;
380 bool ret = false;
381
382 /* program OGAM or 3DLUT only for the top pipe*/
383 if (pipe_ctx->top_pipe == NULL) {
384 /*program rmu shaper and 3dlut in MPC*/
385 ret = dcn30_set_mpc_shaper_3dlut(pipe_ctx, stream);
386 if (ret == false && mpc->funcs->set_output_gamma) {
^^^^^^^^^^^^^^^^^^^^^^^^^^^^ If this is NULL
387 if (stream->out_transfer_func.type == TF_TYPE_HWPWL)
388 params = &stream->out_transfer_func.pwl;
389 else if (pipe_ctx->stream->out_transfer_func.type ==
390 TF_TYPE_DISTRIBUTED_POINTS &&
391 cm3_helper_translate_curve_to_hw_format(
392 &stream->out_transfer_func,
393 &mpc->blender_params, false))
394 params = &mpc->blender_params;
395 /* there are no ROM LUTs in OUTGAM */
396 if (stream->out_transfer_func.type == TF_TYPE_PREDEFINED)
397 BREAK_TO_DEBUGGER();
398 }
399 }
400
--> 401 mpc->funcs->set_output_gamma(mpc, mpcc_id, params);
^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Then it will crash
402 return ret;
403 }
Fixes: d99f13878d ("drm/amd/display: Add DCN3 HWSEQ")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit addresses a potential null pointer dereference issue in the
`dcn32_init_hw` function. The issue could occur when `dc->clk_mgr` is
null.
The fix adds a check to ensure `dc->clk_mgr` is not null before
accessing its functions. This prevents a potential null pointer
dereference.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn32/dcn32_hwseq.c:961 dcn32_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 782)
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit addresses a potential null pointer dereference issue in the
`dcn401_init_hw` function. The issue could occur when `dc->clk_mgr` or
`dc->clk_mgr->funcs` is null.
The fix adds a check to ensure `dc->clk_mgr` and `dc->clk_mgr->funcs` is
not null before accessing its functions. This prevents a potential null
pointer dereference.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn401/dcn401_hwseq.c:416 dcn401_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 225)
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit addresses a potential null pointer dereference issue in the
`dcn30_init_hw` function. The issue could occur when `dc->clk_mgr` or
`dc->clk_mgr->funcs` is null.
The fix adds a check to ensure `dc->clk_mgr` and `dc->clk_mgr->funcs` is
not null before accessing its functions. This prevents a potential null
pointer dereference.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:789 dcn30_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 628)
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit addresses a potential null pointer dereference issue in the
`dcn32_acquire_idle_pipe_for_head_pipe_in_layer` function. The issue
could occur when `head_pipe` is null.
The fix adds a check to ensure `head_pipe` is not null before asserting
it. If `head_pipe` is null, the function returns NULL to prevent a
potential null pointer dereference.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn32/dcn32_resource.c:2690 dcn32_acquire_idle_pipe_for_head_pipe_in_layer() error: we previously assumed 'head_pipe' could be null (see line 2681)
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit addresses a potential null pointer dereference issue in the
`dcn201_acquire_free_pipe_for_layer` function. The issue could occur
when `head_pipe` is null.
The fix adds a check to ensure `head_pipe` is not null before asserting
it. If `head_pipe` is null, the function returns NULL to prevent a
potential null pointer dereference.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn201/dcn201_resource.c:1016 dcn201_acquire_free_pipe_for_layer() error: we previously assumed 'head_pipe' could be null (see line 1010)
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit addresses a potential index out of bounds issue in the
`cm3_helper_translate_curve_to_hw_format` function in the DCN30 color
management module. The issue could occur when the index 'i' exceeds the
number of transfer function points (TRANSFER_FUNC_POINTS).
The fix adds a check to ensure 'i' is within bounds before accessing the
transfer function points. If 'i' is out of bounds, the function returns
false to indicate an error.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:180 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:181 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:182 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'stream_enc_regs' array is an array of dcn10_stream_enc_registers
structures. The array is initialized with four elements, corresponding
to the four calls to stream_enc_regs() in the array initializer. This
means that valid indices for this array are 0, 1, 2, and 3.
The error message 'stream_enc_regs' 4 <= 5 below, is indicating that
there is an attempt to access this array with an index of 5, which is
out of bounds. This could lead to undefined behavior
Here, eng_id is used as an index to access the stream_enc_regs array. If
eng_id is 5, this would result in an out-of-bounds access on the
stream_enc_regs array.
Thus fixing Buffer overflow error in dcn401_stream_encoder_create
Found by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn401/dcn401_resource.c:1209 dcn401_stream_encoder_create() error: buffer overflow 'stream_enc_regs' 4 <= 5
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes index out of bounds issue in
`cm_helper_translate_curve_to_degamma_hw_format` function. The issue
could occur when the index 'i' exceeds the number of transfer function
points (TRANSFER_FUNC_POINTS).
The fix adds a check to ensure 'i' is within bounds before accessing the
transfer function points. If 'i' is out of bounds the function returns
false to indicate an error.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:594 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:595 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:596 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit addresses a potential index out of bounds issue in the
`cm3_helper_translate_curve_to_degamma_hw_format` function in the DCN30
color management module. The issue could occur when the index 'i'
exceeds the number of transfer function points (TRANSFER_FUNC_POINTS).
The fix adds a check to ensure 'i' is within bounds before accessing the
transfer function points. If 'i' is out of bounds, the function returns
false to indicate an error.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:338 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:339 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:340 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/dpp/dcn401/dcn401_dpp_dscl.c:961: warning: Function parameter or struct member 'bs_coeffs_updated' not described in 'dpp401_dscl_program_isharp'
Fixes: 94beb4ac1b ("drm/amd/display: ensure EASF and ISHARP coefficients are programmed together")
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dc/{dcn401,dcn303} are unused since the files in it got moved under their
respective new components location. Hence they are no longer necessary
Fixes: 2d62bb450e ("drm/amd/display: Refactor DCN3X into component folder")
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some interface functions are defined in both the public and private HWSS
interfaces, which can lead to confusion and runtime issues, therefore
the duplicates should be eliminated.
[How]
- power_down should only be private, because it's only used within HWSS.
- update_plane_addr should only be public, as it's used outside HWSS.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The disable fams2 operation was reworked, but some of the old code
remained. This commit removes the disable_fams2_drr from the
dml2_stream_parameters.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove some old comments from DCN32/321.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
Functions dp_enable_link_phy and dp_disable_link_phy can pass link_res
without initializing hpo_dp_link_enc and it is necessary to check for
null before dereferencing.
This fixes 1 FORWARD_NULL issue reported by Coverity.
Fixes: 0beca868cd ("drm/amd/display: Check link_res->hpo_dp_link_enc before using it")
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
dc_link_detect returns a boolean value which can be used to print debug
messages when it fails.
This fixes 1 CHECKED_RETURN issue reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When switching from extended to second display only
mode, the top remote sink is not removed while the top stream
itself is released. This causes DML to think there is no
DP2 output encoder because top remote sink does not match
with the second stream and disables DTBCLK and causes
hang.
[how]
For DP2.0 MST hubs, only treat 1st remote sink as an encoder
only when there are multiple displays connected.
Reviewed-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[what & why]
System hang after s4 regression points to code change here.
Removing possible NULL dereference.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Need to identify which fast updates will update more than just the
address.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To distinguish between different soc with same DCN IP, use variants
starting with alphabets
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use more accurate names to refer to the asic architecture.
dcn3 in DML actually refers to DCN32 and DCN321, so rename it to dcn32x
dcn4 refers to any DCN4x soc., and hence rename dcn4 to dcn4x
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Even if the mode is not supported dml2_check_mode_supported() would still return true.
This causes an unsupported mode to be programmed.
[How]
Check if the mode is supported or not and return the proper result.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
EASF coefficients are programmed to RAM and then RAM selector is toggled.
ISHARP coefficients are programmed after so they will not be in the same
RAM block
[How]
Move ISHARP programming before EASF programming
Add flag if ISHARP coefficients are updated. If so, then
force EASF coefficients programming
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Add standard RCG helpers based on DCCG spec
Reviewed-by: Daniel Miess <daniel.miess@amd.com>
Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Signed-off-by: Hansen Dsouza <hansen.dsouza@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the DML math_ceil2 function, there is one ASSERT if the significance
is equal to zero. However, significance might be equal to zero
sometimes, and this is not an issue for a ceil function, but the current
ASSERT will trigger warnings in those cases. This commit removes the
ASSERT if the significance is equal to zero to avoid unnecessary noise.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To refactor HPO files
[How]
Moved hpo related files to specific hpo folder and
update Makefiles.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Revalla Hari Krishna <harikrishna.revalla@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Need to make sure plane_state is initialized
before accessing its members.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Xi (Alex) Liu <xi.liu@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Hardmax message will be retired for dcn4, so this removes it.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the below with gcc W=1:
Function parameter or struct member 'pstate_keepout' not described in 'optc1_program_timing'
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In some cases during topology changes, a pipe that was used to drive a
stream being removed can be re-assigned to drive a different stream. In
these cases, DSC power gating is not handled properly, leading to
situations where DSC is being setup while power gated.
[How]
- remove enable_stream_gating and disable_stream_gating for DCN401
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix a memleak introduced by not removing the buffer object for use with
early dmub bounding box value storage
Fixes: 234e945558 ("drm/amd/display: Enable copying of bounding box data from VBIOS DMUB")
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Visual Confirm would tell us if it ever
entered idle state.
[How]
Add debug option for IPS visual confirm
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
why:
When the cursor disappears/reappears on fullscreen video, there is a
short transitional period where the cursor's color matrix is using the
same format as the video plane. This sets the cursor to the wrong color
momentarily before the UI plane appears, correcting the color.
how:
Instead of defaulting to using the color space from the input plane,
default to bypass mode.
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Daniel Sa <daniel.sa@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
We calculate static screen wait frames based
on the current timing info in the active stream.
If stream is not initialized, then we should skip
the calculation and go with the default values.
Reviewed-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Some global configuration options were previously hardcoded in DC, now they are
exported by DML and sent to FW.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To refactor DWB related files from dcn30 Files
[How]
Moved DWB related files from dcn30 to specific DWB folder and
updated Makefiles to fix Compilation.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Mudimela <lmudimel@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
For DCN harvest case, if there is no dmcub support, we should return false
to avoid bugcheck later.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Fudongwang <fudong.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
dml2_core_shared_mode_support and dml_core_mode_support access the third
element of dummy_boolean, i.e. hw_debug5 = &s->dummy_boolean[2], when
dummy_boolean has size of 2. Any assignment to hw_debug5 causes an
OVERRUN.
[HOW]
Increase dummy_boolean's array size to 3.
This fixes 2 OVERRUN issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
Poniters, such as stream_enc and dc->bw_vbios, are null checked previously
in the same function, so Coverity warns "implies that stream_enc and
dc->bw_vbios might be null". They are used multiple times in the
subsequent code and need to be checked.
This fixes 10 FORWARD_NULL issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
Poniters, such as dc->clk_mgr, are null checked previously in the same
function, so Coverity warns "implies that "dc->clk_mgr" might be null".
As a result, these pointers need to be checked when used again.
This fixes 10 FORWARD_NULL issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
Functions dp_enable_link_phy and dp_disable_link_phy can pass link_res
without initializing hpo_dp_link_enc and it is necessary to check for
null before dereferencing.
This fixes 2 FORWARD_NULL issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
OTG has new functionality to allow P-State relative to VStartup. Keepout region
for this should be configured based on DML outputs same as other global sync
params.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Make SPL library dc-independent so it can be reused by other
components
[How]
Create separate set of fixed31_32 calls in SPL
Make all inputs and outputs to SPL use primitive types
For ratios and inits, return as uint32 from SPL. So
add conversion from uint32 back to fixed point in
SPL-to-dc translate function
Reviewed-by: Relja Vojvodic <relja.vojvodic@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Current logic in mcache admissibility check has flaw if
calculated number of maches are 3 or more per surface,
so sometimes the check may pass when it should fail,
and sometimes may fail when it should pass, fix the
issue and also adding additional check to make sure that
required number of mcaches per surface cannot be
higher than number of pipes + 1, used on that surface.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Nevenko Stupar <nevenko.stupar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
There are scenarios where ODM4:1 is used but the
surface is entirely outside of the first and last
ODM slice. In this case the recout.width for the
first and last slice is 0 because there's no overlap
with the surface and that ODM slice, but this causes
the x_pos for the cursor in this scenario to be
calculated incorrectly. Instead we should use the
ODM slice width instead of the recout width.
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DML2.1 currently has no concept of a "blanked" stream. For cases like DPMS off,
things like UCLK p-state is always allowed, so PMO is not required to optimize
for it.
[HOW]
Add flag to DML2.1 display configuration to indicate all streams are blanked,
so certain operations and optimizations can be skipped for optimal programming
when displays are blanked.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Sometimes the VRR cannot enable after login to the desktop.
User space may call the DRM_IOCTL_MODE_GETCONNECTOR right after
the DRM_IOCTL_MODE_RMFB.
After calling DRM_IOCTL_MODE_RMFB to remove all the frame buffer
and it will cause the driver to disable the crtc and disable the
link while calling the link_set_dpms_off().
It will cause the dpcd read failed in amdgpu_dm_update_freesync_caps()
while try to get the DP_MSA_TIMING_PAR_IGNORED capability and think
the sink side does not support VRR.
[How]
Use the dpcd_caps.allow_invalid_MSA_timing_param flag instead of
reading from dpcd directly.
dpcd_caps.allow_invalid_MSA_timing_param flag is updated during HPD.
It is safe to replace the original method.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To refactor MPC files
[How]
Moved MPC files to respective folders and
updated makefiles appropriately.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Mounika Adhuri <moadhuri@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
July update for DML2.1 library from hardware team targeting DCN401
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
To determine which block instance to power-gate,
we look at the available pipe resource for both plane
and stream. On MPO, DSC3 was falsely powered on even
though only 1 stream path was enabled because
the resource mapping was not done correctly.
[how]
Acquire the correct DSC instance to power on / off based
on the instance of OPP which determines the backend
pipe index.
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To refactor MMHUBBUB files
[How]
Moved mmhubbub files from dcn20 to /mmhubbub/ folder and
update makefile to fix compilation.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Revalla Hari Krishna <harikrishna.revalla@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When DC state create DML memory allocation fails, memory is not
deallocated subsequently, resulting in uninitialized structure
that is not NULL.
[How]
Deallocate memory if DML memory allocation fails.
Reviewed-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
amdgpu_dm can pass a null stream to dc_is_stream_unchanged. It is
necessary to check for null before dereferencing them.
This fixes 1 FORWARD_NULL issue reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
These pointers are null checked previously in the same function,
indicating they might be null as reported by Coverity. As a result,
they need to be checked when used again.
This fixes 3 FORWARD_NULL issue reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
"dcn20_validate_apply_pipe_split_flags" dereferences merge, and thus it
cannot be a null pointer. Let's pass a valid pointer to avoid null
dereference.
This fixes 2 FORWARD_NULL issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dcn32_enable_phantom_stream can return null, so returned value
must be checked before used.
This fixes 1 NULL_RETURNS issue reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
drr_timing and subvp_pipe are initialized to null and they are not
always assigned new values. It is necessary to check for null before
dereferencing.
This fixes 2 FORWARD_NULL issues reported by Coverity.
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
Variables used as denominators and maybe not assigned to other values,
should not be 0. Change their default to 1 so they are never 0.
This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To refactor OPP files
[How]
Moved opp related files to specific opp folder and
updated Makefiles.
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Revalla Hari Krishna <harikrishna.revalla@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Hotplugging with a DVI-DP dongle on pre-rdna embedded platform
working about half the time. The regression was found to be the
setting of link->type here.
[what]
Reverts fix besides the logging added.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- There are situations where HW cursor is required
- In these scenarios we should disable subvp based on the HW cursor
requirement
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We resync the FIFO after each pipe update in apply_ctx_to_hw.
However, this means that some pipes (in hardware) are based on the
new context and some are based on the current_state (since the pipes
are updated on at a time). In this case we must ensure to use the
pipe_ctx that's currently still configured in hardware when turning
off / on OTG's and reconfiguring ODM during the resync.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added option to allow transition for forced odm.
Add the variation to the nightly run.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Sridevi Arvindekar <sarvinde@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This is a workaround for an dcn3.1 hang that happens if otg dispclk
is ramped while otg is on and stream enc is off.
But this w/a should not trigger when we have a dig active.
[How]
Avoid disable otg when dig FE/BE FIFO was not switched.
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Jingwen Zhu <jingwen.zhu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
why:
New scaler needs the input to be full range color space. This will also fix
issues that come up due to not having a predefined limited color space matrix
for certain color spaces
how:
Use bias and scale HW to expand the range of limited color spaces to full
before the scaler
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Relja Vojvodic <relja.vojvodic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Based on power measurement result, in most cases when display clock is higher
than Vmin display clock, lowering display clock using dynamic ODM will improve
overall power consumption by 0 to 4 watts even if we can't reach Vmin.
[how]
Allow vmin optimization applied even if dispclk can't reach Vmin.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The mux to switch between refclk and dto_dsc_clk is non double buffered.
However dto dsc clk's phase and modulo divider registers are currently
configured as double buffered update. This causes a problem when we switch to
use dto dsc clk and program phase and modulo in the same sequence. In this
sequence dsc clk is switched to dto but the clock divider programming doesn't
take effect until next frame. When we try to program DSCC registers, SMN bus
will hang because dto dsc clk divider phase is set to 0.
[how]
Configure phase and modulo to take effect immediately. Always switch to dto dsc
clk before DSC clock is unagted. Switch back to refclk after DSC clock is gated.
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 5d93060d43 due to a
power consumption regression.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When assert in dp_retrieve_lttpr_cap() is hit, dmesg has traces like:
RIP: 0010:dp_retrieve_lttpr_cap+0xcc/0x1a0 [amdgpu]
Call Trace:
<TASK>
dp_retrieve_lttpr_cap+0xcc/0x1a0 [amdgpu]
report_bug+0x1e8/0x240
handle_bug+0x46/0x80
link_detect+0x35/0x580 [amdgpu]
It happens when LTTPRs fail to increment dpcd repeater count.
We have a recovery action in place for such cases.
Assert is misleading, an indicative error in dmesg is more useful.
[How]
Remove ASSERT and use DC_LOG_ERROR instead.
Reviewed-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Added clock logs to automate DPM testing
[How]
Added logs and helper functions to output clocks
Co-authored-by: Ryan Seto <ryanseto@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Ryan Seto <ryanseto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
For no plane scenarios we should not consider cursor as there cannot
be any cursor if there's no planes. This fixes an issue where
dc_commit_streams fails due to prefetch bandwidth requirements
(the display config + dummy planes + cursor causes the prefetch
bandwidth to exceed what is possible).
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Update coefficients and LUT tables for scaler and sharpener
to improve quality and support different use cases (SDR/HDR)
[How]
Move scaler coefficients to new file dc_spl_scl_easf_filters.c
Remove older coefficients file dc_sp_scl_filters_old.c
Update default taps for EASF support
Update LLS policy for DON'T CARE case
Update cositing offset from 0.5 to 0.25
Add support to adjust sharpness based on level, use case,
and scaling ratio ( using discrete levels )
Apply sharpness to all RGB surfaces and both NV12 and P010
video ( in fullscreen only ). Upscale and 1:1 ratios only
Enable scaler when sharpening 1:1 ratios
Add support for coefficients that are in S1.10 format
(convert to S1.12 format)
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Due to a HW bug, HBR audio is not supported for
DP2 encoders for certain ASICs.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The VRR need to be supported for panel replay feature.
If VRR capability is false, panel replay capability also
need to be disabled.
[How]
After update the vrr capability, the panel replay capability
also need to be check if need.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit is a part of a series that addresses the following build
warning for opp:
./drivers/gpu/drm/amd/display/dc/inc/hw/opp.h:1: warning: no structured
comments found
./drivers/gpu/drm/amd/display/dc/inc/hw/dpp.h:1: warning: no structured
comments found
This commit fixes this issue by adding a simple kernel-doc to a struct
in the opp.h and the dpp.h files.
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When building the kernel-doc, it complains with the below warning:
./drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio.h:1: warning: no structured comments found
./drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio.h:1: warning: no structured comments found
This warning was caused by the wrong use of the ':export:' and the lack
of function documentation in the file pointed under the ':internal:'.
This commit addresses those issues by relocating the overview
documentation to the correct C file, removing the ':export:' options,
and adding two simple kernel-doc to ensure that ':internal:' does not
have any warning.
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/dri-devel/20240715085918.68f5ecc9@canb.auug.org.au/
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
htmldocs warning:
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h: warning:
Function parameter or struct member 'idle_workqueue' not described in
'amdgpu_display_manager'.
[How]
Add comment section for idle_workqueue with param description.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/dri-devel/20240715090211.736a9b4d@canb.auug.org.au/
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the warning:
Function parameter or struct member 'program_3dlut_size' not described in
'mpc_funcs'
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/dri-devel/20240715090445.7e9387ec@canb.auug.org.au/
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the warning:
Function parameter or struct member 'bb_from_dmub' not described in 'amdgpu_display_manager'
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change caused PSR SU panels to not read from their remote fb,
preventing us from entering self-refresh. It is a regression.
This reverts commit eb6dfbb7a9.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dc1000bf46)
When the `power_saving_policy` property is set to bit mask
"Require color accuracy" ABM should be disabled immediately and
any requests by sysfs to update will return an -EBUSY error.
When the `power_saving_policy` property is set to bit mask
"Require low latency" PSR should be disabled.
When the property is restored to an empty bit mask ABM and PSR
can be enabled again.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703051722.328-3-mario.limonciello@amd.com
To enable mesa to use display dcc, DM should expose them in the
supported modifiers. Add the best (most efficient) modifiers first.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In dm resume, we firstly restore dc state and do the mst resume for topology
probing thereafter. If we change dpcd DP_MSTM_CTRL value after LT in mst reume,
it will cause light up problem on the hub.
[How]
Revert commit 202dc359ad ("drm/amd/display: Defer handling mst up request in resume").
And adjust the reason to trigger dc_link_detect by DETECT_REASON_RESUMEFROMS3S4.
Cc: stable@vger.kernel.org
Fixes: 202dc359ad ("drm/amd/display: Defer handling mst up request in resume")
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmaB0NweHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGkvwH/36UJRk/o6wvXnyH
E6QjCSWo2226APyWks22NjtC3I/8Iqdvkneuh6wG0qL2sXAB078EMjUq5R81bF8H
wWFBJwetjYTp8GEyLioMEb2wCH/J3R29dLFC4UYTplafXRGP6//xcpJaKmTxcgdR
31IzvTPXbApZ7L3k1U6rA2bK9PNKcFCOvZlrNMUCuwMrabymHsDfOUt1DqXyg2xp
zjqiWYBwlklozmgawSWt/mdEgkWuTcAbg+KyqDVQF59s9aj/OOwZ0j+HACq5V8CM
quTPIAYL6CC9p7uxa69lGr/sgC0Is/BZLPX7RTZAwCgarGvnX+1HUsjDcaFCtrVg
O6fPUV8=
=pgUx
-----END PGP SIGNATURE-----
Merge v6.10-rc6 into drm-next
The exynos-next pull is based on a newer -rc than drm-next. hence
backmerge first to make sure the unrelated conflicts we accumulated
don't end up randomly in the exynos merge pull, but are separated out.
Conflicts are all benign: Adjacent changes in amdgpu and fbdev-dma
code, and cherry-pick conflict in xe.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Avoid pointer type value compared with 0 to make code clear.
./drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_core/dml2_core_factory.c:14:12-13: WARNING comparing pointer to 0.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9458
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoid pointer type value compared with 0 to make code clear.
./drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_dpmm/dml2_dpmm_factory.c:24:12-13: WARNING comparing pointer to 0.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9458
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoid pointer type value compared with 0 to make code clear.
./drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_mcg/dml2_mcg_factory.c:19:12-13: WARNING comparing pointer to 0.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9458
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoid pointer type value compared with 0 to make code clear.
./drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_pmo/dml2_pmo_factory.c:31:12-13: WARNING comparing pointer to 0.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9458
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The return value from the call to dml21_find_dc_pipes_for_plane() is int.
However, the return value is being assigned to an unsigned int variable
'num_pipes', the condition if(num_pipes <= 0) is not rigorous enough,
so making 'num_pipes' an int.
./drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_wrapper.c:318:6-15: WARNING: Unsigned expression compared with zero: num_pipes <= 0.
./drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_wrapper.c:360:6-15: WARNING: Unsigned expression compared with zero: num_pipes <= 0.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9454
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It used gfx9 flags, which has undefined behavior on gfx12.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All this code has undefined behavior on GFX12 and shouldn't be executed.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Checking SWIZZLE_MODE has undefined behavior on gfx12.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Potential out of bounds access in dml2_calculate_rq_and_dlg_params()
because the value of out_lowest_state_idx used as an index for FCLKChangeSupport
array can be greater than 1.
[How]
Currently dml2 core specifies identical values for all FCLKChangeSupport
elements. Always use index 0 in the condition to avoid out of bounds access.
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some of the panels does not have the refresh rate range info
in base EDID and only have the refresh rate range info in
DisplayID block.
It will cause the max/min freesync refresh rate set to 0.
[How]
Try to parse the refresh rate range info from DisplayID if the
max/min refresh rate is 0.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In OTG disable workarund, CRTC is disabled immediately
to improve performance, but this may cause timing issue
in DP HPO encoder FIFO and result in blank CRCs.
[How]
Replace the immediate CRTC disable call with normal disable call
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Xi (Alex) Liu <xi.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Refactor the code of dio to unit test.
[how]
Moved files to respective folders and changed cMakeLists and makefiles.
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Bhuvanachandra Pinninti <bpinnint@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
We need to ensure to take into account cursor prefetch BW in
mode support or we may pass ModeQuery but fail an actual flip
which will cause a hang. Flip may fail because the cursor_pre_bw
is populated during mode programming (and mode programming is
never called prior to ModeQuery).
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The function enumerates all pipes without checking pipe type. It is only
supposed to call program pixel clock for OTG master pipe only.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reset fams stream count upon stream removal, otherwise
fams2 state machine in dmub will get corrupted.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DM can hook this up to disable SLDO optimizations in firmware during
DMCUB initialization for debug purposes.
[How]
Add the option and pass it through dmub_srv.
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Driver doesn't validate multi-display with scaling when OS calls DDI.
This behavior causes the validated result to be a mismatch
between some automated test cases.
To address this issue, some workaround was added that caused issues in 8k.
[How]
Since the origin issue had been root caused,
revert the previous workaround and unblock 8k with a single dimm.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Audio for 8K 240Hz monitor was not available when it should be
[How]
Added calculation based on stream state
Co-developed-by: Ryan Seto <ryanseto@amd.com>
Reviewed-by: George Shen <george.shen@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Ryan Seto <ryanseto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We only enable the VRR while monitor usable refresh rate range
is greater than 10 Hz.
But we did not check the range in DRM_EDID_FEATURE_CONTINUOUS_FREQ
case.
[How]
Add a refresh rate range check before set the freesync_capable flag
in DRM_EDID_FEATURE_CONTINUOUS_FREQ case.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Cleanup unnecessary code pathes as compile guards were added and removed
overtime.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
A denominator cannot be 0, and is checked before used.
This fixes 2 DIVIDE_BY_ZERO issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
A denominator cannot be 0, and is checked before used.
This fixes 1 DIVIDE_BY_ZERO issue reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
When MPC enabled, need to adjust x and hot spot x
position on one pipe when the cursor is between
MPC slices i.e. when the cursor is moving from one
MPC slice to next slice, while whole cursor size is not
contained within one pipe, to make part of the cursor
to be visible on the other pipe.
Reviewed-by: Sridevi Arvindekar <sridevi.arvindekar@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Nevenko Stupar <nevenko.stupar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We try to disable abm immediately when it's being gradually
disabled, which causes backlight ramping being paused in the
middle
[How]
Don't disable abm immediately if abm has been or is being
disabled through set_abm_level path
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Sherry Wang <yao.wang1@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
Integer multiplies integer may overflow in context that expects an
expression of unsigned/siged long long (64 bits). This can be fixed
by casting integer to unsigned/siged long long to force 64 bits results.
This fixes 26 OVERFLOW_BEFORE_WIDEN issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Certain configurations of DCN401 require ODM4:1 to support DCC for 10K
surfaces. DCC should be conservatively disabled in those cases.
The issue is that current logic limits 10K surface DCC for all
configurations of DCN401.
[How]
Add DC ASIC cap to indicate max surface width that can support DCC.
Disable DCC if this ASIC cap is non-zero and surface width exceeds it.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 871512e36f
due to multiple issues found.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Teeger <gateeger@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Previously, we decide on the unbounded request
purely based on pipe_cnt which is a wrong variable
to use to determine how many pipes are in "use".
DML already accounts for number of pipes in use
along with other various factors and is a more reliable
method of determination.
[how]
Use UnboundedRequestEnabledThisState to decide
on unbounbded_req_enabled.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This error message is unnecessary because returning when aconnector is
uninitialized is the desired outcome during initialization. As well, there
is no equivalent error message for read_dpcd.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Certain situations cause pipes to have a recout of 0, such as when the
dst_rect lies completely outside of a given ODM slice.
[How]
Skip calculation that transforms cursor coordinates to viewport space.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Sometimes the new_crtc_state->vrr_infopacket did not sync up with the
current state.
It will affect the update_freesync_state_on_stream() does not update
the state correctly.
[How]
Reset the freesync config before get_freesync_config_for_crtc() to
make sure we have the correct new_crtc_state for VRR.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add new Replay states 2A (initial Replay entry) and 4E (frame update)
to check is there is new frame update before sending
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is a big structure so use vmalloc as malloc can
fail when there is memory pressure.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3454
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In enable_phantom_plane, we should better check null pointer before
accessing various structs.
Fixes: 09a4ec5da9 ("drm/amd/display: Refactor dc_state interface")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use existing swap() function rather than duplicating its implementation.
./drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_pmo/dml2_pmo_dcn4_fams2.c:1171:103-104: WARNING opportunity for swap().
./drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_pmo/dml2_pmo_dcn4_fams2.c:1231:99-100: WARNING opportunity for swap().
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9400
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function are defined in the amdgpu_dm.c file, but not called
anywhere, so delete the unused function.
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:371:20: warning: unused function 'reverse_planes_order'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9402
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use of macro ARRAY_SIZE to calculate array size minimizes
the redundant code and improves code reusability.
./drivers/gpu/drm/amd/display/modules/hdcp/hdcp_ddc.c:164:45-46: WARNING: Use ARRAY_SIZE.
./drivers/gpu/drm/amd/display/modules/hdcp/hdcp_ddc.c:183:47-48: WARNING: Use ARRAY_SIZE.
./drivers/gpu/drm/amd/display/modules/hdcp/hdcp_ddc.c:237:45-46: WARNING: Use ARRAY_SIZE.
./drivers/gpu/drm/amd/display/modules/hdcp/hdcp_ddc.c:257:47-48: WARNING: Use ARRAY_SIZE.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9405
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leftover copy pasta from original code.
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry.Wentland@amd.com
This version brings along the following:
- Enable DCC on DCN401
- Add reg definitions for DCN401 DCC
- Remove duplicate null check
- Remove always true condition
- Validate function returns
- Ensure curve to hw translation succeed
- Use periodic detection for ipx/headless
- Fix 1DLUT setting for NL SDR blending
- Adjust reg field for DSC wait for disconnect
- Remove a redundant check in authenticated_dp
- Add HW cursor visual confirm
- Fix cursor issues with ODMs and magnification
- Wait for double buffer update on ODM changes
- Reset DSC memory status
- Program CURSOR_DST_X_OFFSET in viewport space
- Add null checks before accessing struct elements
- Fix reduced resolution and refresh rate
- Make DML2.1 P-State method force per stream
- Add workaround to restrict max frac urgent for DPM0
- Call dpmm when checking mode support
- resync OTG after DIO FIFO resync
- Always enable HPO for DCN4 dGPU
- Use sw cursor for DCN401 with rotation
- Add Replay general cmd
- Check HDCP returned status
- Check and log for function error codes
- Check and log for function error codes
- Remove useless function call
- Fix uninitialized variables in dcn401
- Fix cursor size issues
- Run DC_LOG_DC after checking link->link_enc
- Remove redundant checks for pipe_ctx->stream
- Send DP_TOTAL_LTTPR_CNT during detection if LTTPR is present
- Fix cursor issues with ODMs and HW rotations
- Remove unnecessary variable
- Remove redundant var from display_rq_dig_calc in dml
- Refactor dccg401_get_other_enable_symclk_fe
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
The same display null check was a few lines above.
This fixes 1 DEADCODE issue reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
advanced_pstate_switching was initialized to false and never assigned to
another value; as a result !advanced_pstate_switching is always true and
should be removed.
This fixes 2 DEADCODE issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
Function return values must be checked before data can be used
in subsequent functions.
This fixes 4 CHECKED_RETURN issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
Check cm3_helper_translate_curve_to_hw_format runs successfully so the
regamma_params is valid and can be used.
Also revmoed two result assignments.
This fixes 2 CHECKED_RETURN UNUSED_VALUE issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Hotplug is not detected in headless (no eDP) mode on dcn35x.
With no display dcn35x goes to IPS2 powersaving state where HPD interrupt
is not handled.
[HOW]
Use idle worker thread for periodic detection of HPD in headless mode.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Enabling NL SDR blending caused the 1D LUTs to be set/populated in two
different functions. This caused flickering as the LUT was set differently
by the two functions, one of which should only have been modifying the 1D
LUT if 3D LUT was enabled.
[HOW]
Added check to only modify the 1D LUT in populate_mcm if 3D LUT was
enabled.
Added blend_tf function update for non-main planes if the 3D LUT path
was taken.
Reviewed-by: Ilya Bakoulin <ilya.bakoulin@amd.co>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Relja Vojvodic <relja.vojvodic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DSC was waiting for the wrong field to disconnect cleanly.
[HOW]
Changed field the DSC disconnect was waiting on.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ryan Seto <ryanseto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
mod_hdcp_execute_and_set returns (*status == MOD_HDCP_STATUS_SUCCESS).
When it return 0, it is guaranteed that status == MOD_HDCP_STATUS_SUCCESS
will be evaluated as false. Since now we are using goto out already, all 3
if (status == MOD_HDCP_STATUS_SUCCESS) clauses are guaranteed to enter.
Therefore we are removing the if statements due to redundancy.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Added HW cursor visual confirm
[HOW]
Added visual confirm logic when programming cursor positions.
HW is programmed on cursor updates since cursor can change without flips.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ryan Seto <ryanseto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Adjust hot spot positions between ODM slices when cursor
magnification is used.
Reviewed-by: Sridevi Arvindekar <sridevi.arvindekar@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nevenko Stupar <nevenko.stupar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
We must wait for ODM double buffer updates to complete
before exiting the pipe update sequence or we may reduce
DISPCLK and hit some transient underflow (pixel rate is
reduced before the pipes have ODM enabled).
Reviewed-by: Samson Tam <samson.tam@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When system exits idle state followed by enabling the display,
DSC memory may still be forced in a deep sleep or shutdown state.
Intermittent DSC corruption is seen when display is visible.
[HOW]
When DSC is enabled, reset dsc memory to force and disable status.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
According to register specifications, the CURSOR_DST_X_OFFSET
is relative to the start of the data viewport, not RECOUT space.
In this case we must transform the cursor coordinates passed to
hubp401_cursor_set_position into viewport space to program this
register. This fixes an underflow issue that occurs in scaled
mode with low refresh rate.
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
1. is_pwrseq0 needs to check link before accessing link->link_index.
2. context is checked before accessing its bw_ctx.dml2
3. clk_mgr_base->bw_params is checked before clk_table.num_entries_per_cl
This fixes 4 REVERSE_INULL issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Some monitors are forced to a lower resolution and refresh rate after
system restarts.
[HOW]
Some monitors may give invalid LTTPR information when queried such as
indicating they have one DP lane instead of 4. If given an invalid DPCD
version, skip over getting lttpr link rate and lane counts.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Daniel Sa <daniel.sa@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Currently the force only works for a single display, make it so it can
be forced per stream.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Underflow occurs on some platforms when urgent BW is close to
the maximum in DPM0.
[HOW]
It does not occur at DPM1, so as a workaround restrict the maximum
amount and increase the lowest state index for clock states until
we're out of DPM0.
Adds DML2 config options to specify this pe platform as required.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Sung-huai Wang <danny.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
In check_mode_supported, we should validate that the required clocks
can be successfully mapped to DPM levels.
This ensures we only apply dynamic ODM optimizations to modes that
are supported without dynamic ODM optimizations to begin with.
[HOW]
Call dpmm to check that the display config can successfully be
mapped to a DPM level.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Tiled displays showed not aligned on 8K60hz when system resumed
from S3/S4.
[HOW]
Do dc_trigger_sync to re-sync pipes to ensure OTG become synced.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: TungYu Lu <tungyu.lu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY && HOW]
Some DP EDID CTS tests fail due to HPO disable, and we should keep it
enable on DCN4 dGPU.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
On DCN401, the cursor composition to the plane happens after scaler.
So the cursor isn't stretched with the rest of the surface. Temporarily
disable hardware cursor in case when hardware rotation is enabled
such that userspace falls back to software cursor.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Driver side adding replay general cmd interface.
Replay general command will config at most two uint_32 parameters,
with a replay general command subtype to set relative configurations.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Joan Lee <joan.lee@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
dm_dmub_hw_init and drm_dp_mst_topology_mgr_set_mst can return error
codes and errors should be reported.
This fixes 2 CHECKED_RETURN issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
BIOS_CMD_TABLE_REVISION and link_transmitter_control can return error
codes and errors should be reported.
This fixes 3 CHECKED_RETURN issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
clk_mgr_helper_get_active_display_cnt returns display count and itself
alone has no use.
This fixes 1 CHECKED_RETURN issue reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
surf_linear_128_l/c are used in CalculateBytePerPixelAndBlockSizes
before they are assigned, so initializing them before passing them into
the function.
This fixes 2 UNINIT issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
The DC_LOG_DC should be run after link->link_enc is checked, not before.
This fixes 1 REVERSE_INULL issue reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
The null checks for pipe_ctx->stream and pipe_ctx->stream_res.tg
are redundant as they were already dereferenced previously, as
reported by Coverity; therefore the null checks are removed.
This fixes 6 REVERSE_INULL issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
New register field added in DP2.1 SCR, needed for auxless ALPM
[HOW]
Echo value read from 0xF0007 back to sink
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Current code for cursor positions does not work properly
with different ODM options and HW rotations like ODM
2to1, 3to1 and 4to1, and has different issues depending on
angle of HW rotations.
[HOW]
Fixed these issues so to work properly when ODM is used with HW rotations.
Reviewed-by: Sridevi Arvindekar <sridevi.arvindekar@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nevenko Stupar <nevenko.stupar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Coverity analysis flagged this code as DEADCODE because
the condition '(!need_recovery)' is never true.
The variable 'need_recovery' is initialized as 'true',
is not assigned to 'false' anywhere before the
conditional statement.
Since the variable is only used for the conditional check,
but the check can never be true, the variable itself is
redundant.
[HOW]
Removed the variable 'need_recovery'.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivlipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Coverity analysis flagged these files as containing DEADCODE, i. e.
redundant or unreachabale. In these files, variable 'mode_422' is
always the same file (0 or false), so any code logic with it is
redundant.
[HOW]
Removed 'mode_422' variable and all code with it from
'display_rq_dlg_calc_' functions in dml.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivlipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Function was used to check the number of FEs connected to the current BE.
This was then used to determine if the symclk could be disabled, if all
FEs were disconnected. However, the function would skip over the primary
FE and return 0 when the primary FE was still connected. This caused black
screens on driver disable with an MST daisy chain hooked up.
[HOW]
Refactored the function to correctly return the number of FEs connected to
the input BE. Also renamed it for clarity.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Relja Vojvodic <relja.vojvodic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
On hotpluggin a 4k144 HDMI FRL setup, display fails FRL link training
and falls back to TMDS which is caused by driver not ungating HPO before
doing FRL link training.
[HOW]
Enable debug flag to disable HPO power gate in DCN35
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This code works, but it's not aligned correctly. Add a couple missing
tabs.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
New register field added in DP2.1 SCR, needed for auxless ALPM
[HOW]
Echo value read from 0xF0007 back to sink
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UAPI Changes:
- Deprecate DRM date and return a 0 date in DRM_IOCTL_VERSION
Core Changes:
- connector: Create a set of helpers to help with HDMI support
- fbdev: Create memory manager optimized fbdev emulation
- panic: Allow to select fonts, improve drm_fb_dma_get_scanout_buffer
Driver Changes:
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- ivpu: hardware scheduler support, profiling support, improvements
to the platform support layer
- mgag200: general reworks and improvements
- nouveau: Add NVreg_RegistryDwords command line option
- rockchip: Conversion to the hdmi helpers
- sun4i: Conversion to the hdmi helpers
- vc4: Conversion to the hdmi helpers
- v3d: Perf counters improvements
- zynqmp: IRQ and debugfs improvements
- bridge:
- Remove redundant checks on bridge->encoder
- panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every
ad-hoc implementation in the panel drivers
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE
nv110wum-l60, IVO t109nw41
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCZlhUKAAKCRAnX84Zoj2+
dgHoAYDTpShgXFXnlnMtqZr+ZuShcjcwiqzwM4qNWdtyji9MONtJJU3ZQnGlnXbI
ZU+oZP0Bf0PyT0/8bf+rmZBJ1UdAxt2IQaLkP1tTHOad4E+KlcL5n1opzMi160mB
EZSm9f7aNw==
=bZPt
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2024-05-30' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.11:
UAPI Changes:
- Deprecate DRM date and return a 0 date in DRM_IOCTL_VERSION
Core Changes:
- connector: Create a set of helpers to help with HDMI support
- fbdev: Create memory manager optimized fbdev emulation
- panic: Allow to select fonts, improve drm_fb_dma_get_scanout_buffer
Driver Changes:
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- ivpu: hardware scheduler support, profiling support, improvements
to the platform support layer
- mgag200: general reworks and improvements
- nouveau: Add NVreg_RegistryDwords command line option
- rockchip: Conversion to the hdmi helpers
- sun4i: Conversion to the hdmi helpers
- vc4: Conversion to the hdmi helpers
- v3d: Perf counters improvements
- zynqmp: IRQ and debugfs improvements
- bridge:
- Remove redundant checks on bridge->encoder
- panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every
ad-hoc implementation in the panel drivers
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE
nv110wum-l60, IVO t109nw41
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240530-hilarious-flat-magpie-5fa186@houat
Commit 77acc6b55a ("riscv: add support for kernel-mode FPU") and
commit a28e4b672f ("drm/amd/display: use ARCH_HAS_KERNEL_FPU_SUPPORT")
enabled support for CONFIG_DRM_AMD_DC_FP with RISC-V. Unfortunately,
this exposed -Wframe-larger-than warnings (which become fatal with
CONFIG_WERROR=y) when building ARCH=riscv allmodconfig with clang:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:58:13: error: stack frame size (2448) exceeds limit (2048) in 'DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerformanceCalculation' [-Werror,-Wframe-larger-than]
58 | static void DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerformanceCalculation(
| ^
1 error generated.
Many functions in this file use a large number of parameters, which must
be passed on the stack at a certain pointer due to register exhaustion,
which can cause high stack usage when inlining and issues with stack
slot analysis get involved. While the compiler can and should do better
(as GCC uses less than half the amount of stack space for the same
function), it is not as simple as a fix as adjusting the functions not
to take a large number of parameters.
Unfortunately, modifying these files to avoid the problem is a difficult
to justify approach because any revisions to the files in the kernel
tree never make it back to the original source (so copies of the code
for newer hardware revisions just reintroduce the issue) and the files
are hard to read/modify due to being "gcc-parsable HW gospel, coming
straight from HW engineers".
Avoid building the problematic code for RISC-V by modifying the existing
condition for arm64 that exists for the same reason. Factor out the
logical not to make the condition a little more readable naturally.
Fixes: a28e4b672f ("drm/amd/display: use ARCH_HAS_KERNEL_FPU_SUPPORT")
Reported-by: Palmer Dabbelt <palmer@rivosinc.com>
Closes: https://lore.kernel.org/20240530145741.7506-2-palmer@rivosinc.com/
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Empty SST TUs are illegal to transmit over a USB4 DP tunnel.
Current policy is to configure stream encoder to pack 2 pixels per pclk
even when ODM combine is not in use, allowing seamless dynamic ODM
reconfiguration. However, in extreme edge cases where average pixel
count per TU is less than 2, this can lead to unexpected empty TU
generation during compliance testing. For example, VIC 1 with a 1xHBR3
link configuration will average 1.98 pix/TU.
[HOW]
Calculate average pixel count per TU, and block 2 pixels per clock if
endpoint is a DPIA tunnel and pixel clock is low enough that we will
never require 2:1 ODM combine.
Cc: stable@vger.kernel.org # 6.6+
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Current DRAM setting would cause underflow on customer platform.
Modify dram_clock_change_latency_us from 11.72 to 34.0 us as per recommendation from HW team
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Intermittent underflow observed when using 4k144 display on
dcn351
[How]
Update dram_clock_change_latency_us from 11.72us to 34us
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We can't read/write to DCN registers while in IPS. Since, that can cause
the system to hang. So, before proceeding with the access in that
scenario, force the system out of IPS.
Cc: stable@vger.kernel.org # 6.6+
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Disable idle optimization for each atomic commit is unnecessary,
and can lead to a potential race condition.
[How]
Remove idle optimization check from amdgpu_dm_atomic_commit_tail()
Fixes: 196107eb1e ("drm/amd/display: Add IPS checks before dcn register access")
Cc: stable@vger.kernel.org
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add new condition for PSR exit due to ESD recovery
- Add new VB scaling feature for ABM by interpolating between
existing VB parameters, allowing driver to have fine grain
scaled VB levels between 0 - 250
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The null checks for aconnector and aconnector->dc_link and
stream redundant as they were already dereferenced previously
as reported by Coverity; therefore the null checks are removed.
This fixes 4 REVERSE_INULL issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CalculateSwathAndDETConfiguration_params_st's UnboundedRequestEnabled
is a pointer (i.e. dml_bool_t *UnboundedRequestEnabled), and thus
if (p->UnboundedRequestEnabled) checks its address, not bool value.
This fixes 1 REVERSE_INULL issue reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The null checks for context are redundant as it was already
dereferenced previously, as reported by Coverity; therefore
the null checks are removed.
This fixes 2 REVERSE_INULL issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The null checks for opp are redundant as they were already
dereferenced previously, as reported by Coverity; therefore
the null checks are removed.
This fixes 2 REVERSE_INULL issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The null checks are redundant as they were already dereferenced
previously, as reported by Coverity; therefore the null checks
are removed.
This fixes 7 REVERSE_INULL issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These portions of code are flagged as 'UNUSED_VALUE' by the
Coverity analysis since the assigned values of these vars
are never used in the code.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Ivan Lipski <ivlipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The null checks for ctx->dc_bios are redundant as it was already
dereferenced previously, as reported by Coverity; therefore the
null checks are removed.
This fixes 7 REVERSE_INULL issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The null checks for res_pool->dccg are redundant as it was already
dereferenced previously, as reported by Coverity; therefore the
null checks are removed.
This fixes 6 REVERSE_INULL issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If some part of the driver tries to call
resource_get_opp_heads_for_otg_master in a non-OTG master context, DC
will trigger a dmesg warning since this situation indicates that some
configuration associated with ODM slices might be wrong. This commit
adds an extra log to describe why the warning was triggered to make the
debugging more straightforward.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When booting the system with DCN401, the driver adds the following dmesg
warning:
WARNING: CPU: 8 PID: 175 at
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:1923
resource_get_opp_heads_for_otg_master+0x13/0x70 [amdgpu]
Modules linked in: amdgpu(+) hid_generic amdxcp i2c_algo_bit
drm_ttm_helper ttm drm_exec gpu_sched drm_suballoc_helper drm_buddy
drm_display_helper drm_kms_helper usbhid hid drm i2c_piix4 ahci igc
libahci video wmi
CPU: 8 PID: 175 Comm: systemd-udevd Not tainted 6.8.0-EXTRA-PROMO-MAY-29+ #66
Hardware name: ASUS System Product Name/TUF GAMING X570-PRO (WI-FI),
BIOS 4021 08/10/2021
RIP: 0010:resource_get_opp_heads_for_otg_master+0x13/0x70 [amdgpu]
Code: 8b 66 0f 1f 44 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90
90 0f 1f 44 00 00 55 48 83 bf f8 07 00 00 00 48 89 e5 74 0c <0f> 0b 31
f6 89 f0 5d e9 0c 65 01 e5 48 83 bf e0 07 00 00 00 75 ea
RSP: 0018:ffffa5f000816ed8 EFLAGS: 00010246
[...]
PKRU: 55555554
Call Trace:
<TASK>
? show_regs+0x65/0x70
? __warn+0x85/0x160
? resource_get_opp_heads_for_otg_master+0x13/0x70 [amdgpu]
? report_bug+0x192/0x1c0
? handle_bug+0x44/0x90
? exc_invalid_op+0x18/0x70
[...]
This warning is triggered by a check in the function
resource_get_opp_heads_for_otg_master that validates if the request
operation is in a master OTG pipe; if not, the warning above is
displayed. In other words, another part of the code might be calling
this function in a non-OTG master pipe context, resulting in the log
message.
The reason the ASSERT was triggered is that the current state wasn't
updated after applying the context to the hardware. This means that the
update_dsc_for_odm_change might be called from a non-OTG-MASTER. To
prevent this, it's crucial to check if the current reference is pointing
to an OTG master before operate in the old OTG master reference. If it's
not, the function must set the old OTG reference to NULL and avoid
calling resource_get_opp_heads_for_otg_master before the context is
updated.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Co-developed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Integer divisions result in loss of fractional and accuracy is lost
when assigned or compared with double. It is necessary to perform
double/integer instead or explicitly cast them to double.
This fixes 54 UNINTENDED_INTEGER_DIVISION issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
resource_get_odm_slice_count and resource_get_otg_master_for_stream can
return null, and their returns must be checked before used.
This fixes 4 NULL_RETURNS issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dc_state_get_stream_status dc_state_get_paired_subvp_stream and other
functions can return null, and therefore null must be checked before
status can be used.
This fixes 21 NULL_RETURNS issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to reconfigure ODM when resyncing FIFO because on OTG disable we
clear all ODM programming
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mirror case unsupported for cursors. So, remove code for mirror case
with cursors.
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Sridevi Arvindekar <sarvinde@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Checks null pointer before accessing various structs.
This fixes 5 NULL_RETURNS issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Callers can pass null in filter (i.e. from returned from the function
wbscl_get_filter_coeffs_16p) and a null check is added to ensure that is
not the case.
This fixes 4 NULL_RETURNS issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
BIOS images may fail to load and null checks are added before they are
used.
This fixes 6 NULL_RETURNS issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Checks null pointer before passing variables to functions.
This fixes 3 NULL_RETURNS issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Coverity reports sign extention defects as below:
Suspicious implicit sign extension: mode->htotal with type u16 ... to
int (32 bits, signed), then sign-extended to type unsigned long
(64 bits, unsigned). If mode->htotal * mode->vtotal is greater than
0x7FFFFFFF, the upper bits of the result will all be 1.
Cast it to unsigned long to avoid possible overflow.
This fixes 4 SIGN_EXTENSION issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Tell the system about the current host router bandwidth to be used to
measure and calculate the right voltage to be used.
[how]
Send SMU message of each DPIA host router bandwidth.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When a phantom stream is in the process of being deconstructed, there
could be pipes with no associated planes. In that case, ignore the
phantom stream entirely when searching for associated pipes.
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Empty SST TUs are illegal to transmit over a USB4 DP tunnel.
Current policy is to configure stream encoder to pack 2 pixels per pclk
even when ODM combine is not in use, allowing seamless dynamic ODM
reconfiguration. However, in extreme edge cases where average pixel
count per TU is less than 2, this can lead to unexpected empty TU
generation during compliance testing. For example, VIC 1 with a 1xHBR3
link configuration will average 1.98 pix/TU.
[HOW]
Calculate average pixel count per TU, and block 2 pixels per clock if
endpoint is a DPIA tunnel and pixel clock is low enough that we will
never require 2:1 ODM combine.
Cc: stable@vger.kernel.org # 6.6+
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Move DCN3X files to unique component folder.
[how]
Create respective component folder in dc, move the DCN3X files into
corresponding new folders and made appropriate changes for compilation
in Makefiles.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Mounika Adhuri <moadhuri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On init if a display is connected, we need to maintain the DISPCLK
frequency Even though DPG_EN=1, the display still requires the correct
timing or it could cause audio corruption (if DISPCLK freq is reduced).
[How]
Read the current DISPCLK freq and request the same value to ensure the
timing is valid and unchanged.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a coding error which causes incorrect variables to be assigned
in DML21 phase 5.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Coverity analysis this conditional code as DEADCODE.
The conditional statement is never true since
'MacroTileSizeBytes' is either 256 or 65536. Thus, the
code inside is the conditional statement is never reached.
[HOW]
Removed the conditional statement.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Ivan Lipski <ivlipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Coverity analysis flagged this condition as DEADCODE since the
variable 'req128_c' is always false, thus the condition is never
true.
[HOW]
Remove the condition.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Ivan Lipski <ivlipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit e902dd7f3e.
A proper fix for this issue has been implemented in DMUB FW. So, no need
to keep the workaround.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Found while hotplugging MST daisy chain displays. Changing dispclk
during this sequence caused SMU hang due to DIG fifo not being disabled
correctly (caused by missing functions).
[How]
Adding disable/enable DIG fifo functions for dcn401
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Relja Vojvodic <relja.vojvodic@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During HW init, certain operations the driver performs are invalid on
enabled hardware in an unknown state (for example, setting all clock
values to minimum when the GPU is actively driving a display). There is
already code present to call HWSS->power_down during init when any link
is enabled in HW, but that function pointer is unpopulated for most asics.
We want to enable this codepath for DCN401, as it resolves the issue with
being unable to drive certain display configs on adapter re-enable, and we
can restore boot optimizations.
[How]
- add power_down HWSS function for DCN401
- remove debug bit to disable boot optimizations for DCN401
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
PHYSYMCLK RCO has been found to lead to crashes in some
corner cases
[How]
Disable PHYSYMCLK RCO debug bit
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Create a general command and fix Replay desync error with general cmd
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Update the idle hardmin with SMU if either clock changed.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
dmub_rb_cmd's ramping_boundary has size of uint8_t and it is assigned
0xFFFF. Fix it by changing it to uint8_t with value of 0xFF.
This fixes 2 INTEGER_OVERFLOW issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Reinit should return after completing version 2.1 reinit instead of calling
version 2 reinit after.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Add additional delay factor when considering a safe time to flip for HWFQ
to be passed in by the driver.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Sometimes this function is called with a partially deconstructed phantom
stream toplolgy, and should ignore phantoms with no plane state.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
SubVP is not supported when hardware rotation is in use.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
v_total is an uint32_t and subtracting an unsigned to a signed will
result in an unsigned which is always >= 0. As a result, the ternary
conditions are always true and thus has no effect.
This is fixed by casting v_total to signed explicitly. This also
avoids v_total subtraction to overflow.
This fixes 1 NO_EFFECT, 2 DEADCODE and 2 INTEGER_OVERFLOW issues reported
by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
The self-assignments have no effects and thus are removed.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Coverity analysis of the Upstream display driver code
(amd-staging-drm-next) flagged these three functions as
containing 'CONSTANT_EXPRESSION_RESULT' errors, i. e. the
conditionals are reduntant since their result is predetermined.
fixpt31_32.c:
The two flagged 'ASSERT' lines redundant since they are always true:
- LONG_MAX equals to the largest 'signed long long' number
- res.value is type 'signed long long',
So, the condition inside the 'ASSERTS's is always
link_dp_training.c:
The flagged conditional statement is always false:
- 'max_requested.FFE_PRESET.settings.level' is 4 bits, so its max
possible value is 15
- 'DP_FFE_PRESET_MAX_LEVEL' equals to 15.
So, the conditional statement is always false and the wrapped code
never executes.
[HOW]
Removed lines flagged by Coverity analysis.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Ivan Lipski <ivlipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
hardare_release() is called when driver is removed. Add the missing hook for DCN401
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In YCbCr422 format hardware shares 1 set of chromas CbCr with 2 sets of
lumas Y. Therefore each ODM segment needs to be two pixel aligned. The
commit adds this missing hardwware requirement into ODM segment width
decision logic.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Add flag to disable IPS when it is not allowed.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: JinZe.Xu <jinze.xu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[How&Why]
This reverts commit 239b31bd5c.
Due to the it effects Replay resync.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Sung-huai Wang <danny.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
The comparisons of unsigned int with 0 can have no meanings, i.e.
unsigned int >= 0 (always true) or unsigned int < 0 (always false), and
therefore they are removed.
This fixes 12 NO_EFFECT issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes an UNINIT issue reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
fe_clk_en and be_clk_sel have size of 4 but sizeof(fe_clk_en) has
byte size 16 which is lager than the array size.
[HOW]
Use ARRAY_SIZE for calculating size.
This fixes 2 OVERRUN issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move pipe_ctx variables to start of the function and add a helpful comment
Co-authored-by: Sridevi Arvindekar <sarvinde@amd.com>
Reviewed-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Sridevi Arvindekar <sarvinde@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Coverity highlighted that the parameter otg_master is referenced before
the if condition that validates it, which means that the code might have
some attempt to access a null pointer. This commit addresses this issue
by moving the pointer verification to the beginning of the function and
initializing all the values right after it.
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DMCUB can intermittently take longer than expected to process commands.
Old ASIC policy was to continue while logging a diagnostic error - which
works fine for ASIC without IPS, but with IPS this could lead to a race
condition where we attempt to access DCN state while it's inaccessible,
leading to a system hang when the NIU port is not disabled or register
accesses that timeout and the display configuration in an undefined
state.
[How]
We need to investigate why these accesses take longer than expected, but
for now we should disable the timeout on DCN35 to avoid this race
condition. Since the waits happen only at lower interrupt levels the
risk of taking too long at higher IRQ and causing a system watchdog
timeout are minimal.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
We set preferred link settings for virtual signal. However we don't support
virtual signal for UHBR link rate. If preferred is set to UHBR link rate, we
will allow virtual signal with UHBR link rate which causes system crashes.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
DML1 validation code doesn't have the ability to remove ODM combine.
It will directly translate currently used ODM combine config into ODM
override. If ODM combine is used in the initial state it will only
validate the timing if ODM is used. This is not correct for dynamic ODM u
se case, as ODM is used as an optimization not a hard requirement.
[how]
Remove ODM combine in the initial state before bandwidth validation so
DML will not translate it into ODM override in the initial bandwidth
validation.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There are cases where update pipe params could fail but dpp pipes are already
added to the state. In this case, we should remove dpp pipes so dc state is
restored back. If it is not restored, dc state is corrupted after calling this
function, so if we call the same interface with the corrupted state again, we
may end up programming pipe topology based on a corrupted dc state.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
These registers should not be read from driver and triggering the
security violation when DMCUB work times out and diagnostics are
collected blocks Z8 entry.
[How]
Remove the register read from DCN35.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Compositors have different ways of assigning surfaces to DRM planes for
render offloading. It may decide between various strategies: overlay,
underlay, or a mix of both (see here for more info:
https://gitlab.freedesktop.org/emersion/libliftoff/-/issues/76)
One way for compositors to implement the underlay strategy is to assign
a higher zpos to the DRM_PRIMARY plane than the DRM_OVERLAY planes,
effectively turning the DRM_OVERLAY plane into an underlay plane.
Today, amdgpu attaches an immutable zpos of 0 to the DRM_PRIMARY plane.
This however, is an arbitrary restriction. DCN pipes are general
purpose, and can be arranged in any z-order. To support compositors
using this allocation scheme, we can set a non-zero immutable zpos for
the PRIMARY, allowing the placement of OVERLAYS (mutable zpos range
0-254) beneath the PRIMARY.
[How]
Assign a zpos = #no of OVERLAY planes to the PRIMARY plane. Then, clean
up any assumptions in the driver of PRIMARY plane having the lowest
zpos.
v2: Fix typo s/decending/descending/
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN is the display hardware for amdgpu. DRM planes are backed by DCN
hardware pipes, which carry pixel data from one end (memory), to the
other (output encoder).
Each DCN pipe has the ability to blend in a cursor early on in the
pipeline. In other words, there are no dedicated cursor planes in DCN,
which makes cursor behavior somewhat unintuitive for compositors.
For example, if the cursor is in RGB format, but the top-most DRM plane
is in YUV format, DCN will not be able to blend them. Because of this,
amdgpu_dm rejects all configurations where a cursor needs to be enabled
on top of a YUV formatted plane.
From a compositor's perspective, when computing an allocation for
hardware plane offloading, this cursor-on-yuv configuration result in an
atomic test failure. Since the failure reason is not obvious at all,
compositors will likely fall back to full rendering, which is not ideal.
Instead, amdgpu_dm can try to accommodate the cursor-on-yuv
configuration by opportunistically reserving a separate DCN pipe just
for the cursor. We can refer to this as "overlay cursor mode". It is
contrasted with "native cursor mode", where the native DCN per-pipe
cursor is used.
[How]
On each crtc, compute whether the cursor plane should be enabled in
overlay mode. If it is, mark the CRTC as requesting overlay cursor mode.
Overlay cursor should be enabled whenever there exists a underlying
plane that has YUV format, or is scaled differently than the cursor. It
should also be enabled if there is no underlying plane, or if underlying
planes do not cover the entire CRTC.
During DC validation, attempt to enable a separate DCN pipe for the
cursor if it's in overlay mode. If that fails, or if no overlay mode is
requested, then fallback to native mode.
v2:
* Update commit message for when overlay cursor should be enabled
* Also consider scale and no-underlying-plane case (cursor on crtc bg)
* Consider all underlying planes when determinig overlay/native, not
just the plane immediately beneath the cursor, as it may not cover the
entire CRTC.
* Fix typo s/decending/descending/
* Force native cursor on pre-DCN hardware
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Define debug interface to dmub for reading back abm data.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Josip Pavic <josip.pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dm_dp_mst_is_port_support_mode() is a bit not following the original design rule and cause
light up issue with multiple 4k monitors after mst dsc hub.
[How]
Refactor function dm_dp_mst_is_port_support_mode() a bit to solve the light up issue.
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When unplug one of monitors connected after mst hub, encounter null pointer dereference.
It's due to dc_sink get released immediately in early_unregister() or detect_ctx(). When
commit new state which directly referring to info stored in dc_sink will cause null pointer
dereference.
[how]
Remove redundant checking condition. Relevant condition should already be covered by checking
if dsc_aux is null or not. Also reset dsc_aux to NULL when the connector is disconnected.
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Current DRAM setting would cause underflow on customer platform.
Modify dram_clock_change_latency_us from 11.72 to 34.0 us as per recommendation from HW team
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Intermittent underflow observed when using 4k144 display on
dcn351
[How]
Update dram_clock_change_latency_us from 11.72us to 34us
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
It actually exposes '6' types in enum dmub_notification_type. Not 5. Using smaller
number to create array dmub_callback & dmub_thread_offload has potential to access
item out of array bound. Fix it.
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Link hpd status is set during link detection process via dpia_query_hpd_status(),
doesn't need to explicitly set it during outbox irq. Remove it.
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Debug msg for usb4/tbt now is a bit confusing. Adjust it for better reading.
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Reference clock, either DPREFCLK or DTBCLK can be a value of 0
which then will encounter division by 0.
[How]
Avoid further calculation and programming if refclk is not
populated.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN401 currently has an issue re-enabling when pipe splitting is enabled,
while the root cause is being investigated we can make sure everything is
being reset as a workaround, by disabling boot optimization.
[How]
- use enable_accelerated_mode instead of init_pipes to fully reset asic
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
uint32_t is implicitly converted to uint64_t while multiplication
still happens on uint32_t side. This creates digit overflow
for large pixel clock which is meant to be retained in uint64_t.
[How]
Calculate multiplication of units in uint64_t domain instead of
uint32_t in DTO parameter clock caculation.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the SPDX format for dmub_replay.c|.h files.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The coverity analysis flagged this if expression as it contains a
'CONSTANT_EXPRESSION_RESULT': 'update_idle_uclk' is 'ORd' with itself.
[HOW]
Removed the duplicate 'update_idle_uclk'.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Ivan Lipski <ivlipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Passive DP40 cables were updated in the latest DP spec to support
UHBR13.5 link rate. Current max link rate logic checks against the
cable ID DPCD even for passive cables.
[How]
Ignore UHBR13.5 cable ID DPCD cap in get_max_link_rate logic.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
replay_capability debugfs tells whether sink and driver support
replay feature. However replay enablement also depends on
whether it is enabled/disabled via amdgpu module params.
[How]
Add 'Config support' entry to output current replay config.
Reviewed-by: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
prevent invalid memory access
[How]
check if dc and stream are NULL
Co-authored-by: winstang <winstang@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: winstang <winstang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Change ordering of structs to put enums together
- Add new define DMUB_TRACE_ENTRY_DEFINED to guard
the trace code enum
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Adds support for performing the sequential ONO changes from DCN351
into DCN35 ASIC based on revision.
[How]
Check the revision and run the DCN351 sequences on applicable revisions.
Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Phantom DTBCLK can be calculated different from main because phantom
has no DSC and thus will have a different output BPP. Ignore phantom
DTBCLK requirement and only consider non-phantom DTBCLK requirements.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Some sinks are observed to return invalid LTTPR revision and/or invalid
LTTPR link rate capabilities.
[HOW]
Assume any LTTPR which reports invalid max link rate supports HBR3.
Don't validate LTTPR DPCD revision in dp_is_lttpr_present check.
Reviewed-by: George Shen <george.shen@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Needed for PHY patterns as well to perform electrical compliance.
Also need to increase wait time from 30ms to 50ms to resolve very
intermittent UHBR20 link training failures.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
We need to decrease ODM slice when adding or removing planes because MPO
support takes precedence over dynamic ODM combine. However there is a case where
we remove ODM combine even for ODM combine required timing in the initial new
dc state. This is normally okay because ODM will be added back after we pass DML
bandwidth validation. However since we remove ODM combine in the initial new
state, the previous ODM pipe allocation is lost. This may cause the new plane to
take away the original secondary OPP head pipe that is still required in the new
state.
For a timing that requires ODM 2:1 but optimized with ODM 4:1, if we add an MPO
plane, we will not have enough pipe to preserve ODM 4:1. In this case we should
reduce ODM slice count then try to add the MPO plane again. By reducing, we are
gradually remove 1 ODM slice from right most side one at a time until we have
enough free pipes for the new plane. If we remove ODM combine entirely, we could
use the pipe at ODM slice index 1 as a DPP pipe for the new plane. But ODM slice
1 is still needed as the timing requires ODM 2:1. This transition is not
seamless and user will see corruption on the screen.
[how]
Remove single ODM slice one at time until we have enough pipes for a new plane.
Remove previous logic to always remove ODM combine entirely.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Remove some cursor offset calculations for rotated cursor for fixing a bug where multiple cursors are seen.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Nevenko Stupar <nevenko.stupar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
why:
DML21 being overwritten after init.
how:
After initializing, early return.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Daniel Sa <daniel.sa@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Official Release CTA specification reverted the change and
no longer uses version 5 to indicate OVT timing.
[How]
Change the version used for AVI info Frame for OVT to 4.
Reviewed-by: Leo Ma <hanghong.ma@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
No need to assign stream_status NULL because it is always
re-assigned before usage. This change is to fix coverity
errors.
Reviewed-by: Nicholas Choi <nicholas.choi@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Duplicate headers requiring unecessary maintenance of both headers
[HOW]
Removal of smu13_driver_if header and all referneces to it changed to dcn32_smu13_driver
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Coverity analysis flagged this ternary operation as
DEADCODE.
Since 'total_y_free_entry' is initialized as 0x200 and
'total_c_free_entry' is initialized as 0x140, and they
never change values before the ternary operator, so
'total_y_free_entry' is always greater 'total_c_free_entry',
'so small_free_entry' is always set to 'total_c_free_entry'.
[HOW]
Replace the ternary operator with the variable declaration.
Signed-off-by: Ivan Lipski <ivlipski@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Coverity analysis flagged this code as DEADCODE
since the condition and return in the outer loop
are never reached.
All operations with the 'dwb_pipe' variable happen
in the inner loop, that already contains the same
check with the 'MAX_DWB_PIPES'. The later
check condition cannot occur before the check
condition in the inner loop, thus the later
condition is unreacable.
[HOW]
Remove the unreachable condition.
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Ivan Lipski <ivlipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Coverity analysis flagged the two if conditions in
dcn30_dpp.c and dcn401_dpp.c as DEADCODE since they
are never true, since the variable
'program_prealpha_dealpha' is initialized at 0 and
never chagnes.
[HOW]
Removed the variable 'program_prealpha_dealpha' and
the if conditions.
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Ivan Lipski <ivlipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
OPP input rect aka odm slice rect is a hardware dependent parameter that
can't be determined by SPL software logic. Therefore we need to
explicitly pass odm slice rect in. So ODM slice rect calculation is
moved out of SPL.
[how]
add odm_slice_rect parameter in spl_in
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When optc uses two pixel per container, each ODM slice width must be an
even number.
[how]
If ODM slice width is odd number increase it by 1.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When PHY power off, the DP_SEC_CNTL cannot be configured and cause
disable Adaptive sync SDP failed. Regarding the issue, the driver will
disabled AS-SDP in replay state machine.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dennis Chan <dennis.chan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Because ABM will wait VStart to start getting histogram data, it will
cause we can't enter IPS while full screnn video playing.
[How]
Modify the panel refresh rate to the maximun multiple of current refresh
rate
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: ChunTao Tso <ChunTao.Tso@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Dmub provides several Replay residency calculation methods, but current
interface only supports either ALPM or PHY mode
[How]
Modify the interface for supporting different types of Replay residency
calculation.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Leon Huang <Leon.Huang1@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The original coasting vtotal is 2 bytes, and it need to be amended to 4
bytes because low hz case.
[How]
Amend coasting vtotal from 2 bytes to 4 bytes.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: ChunTao Tso <ChunTao.Tso@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For some specific panel, it need to use TPS3 rather than use TP2 in ALPM
when DSC is enabled.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: pochchan <pochchan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We can hang in place trying to send commands when the DMCUB isn't
powered on.
[How]
For functions that execute within a DC context or DC lock we can wrap
the direct calls to dm_execute_dmub_cmd/list with code that exits idle
power optimizations and reallows once we're done with the command
submission on success.
For DM direct submissions the DM will need to manage the enter/exit
sequencing manually.
We cannot invoke a DMCUB command directly within the DM execution helper
or we can deadlock.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
These functions can be called from high IRQ levels and the OS will hang
if it tries to use a usleep_highres or a msleep.
[How]
Replace the flseep with a udelay for dmub_replay_enable.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use dc_wake_and_execute_gpint with DM_DMUB_WAIT_TYPE_WAIT_WITH_REPLY to
get the replay state.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, amdgpu will always set up the brightness at 100% when it
loads. However this is jarring when the BIOS has it previously
programmed to a much lower value.
The ACPI ATIF method includes two members for "ac_level" and "dc_level".
These represent the default values that should be used if the system is
brought up in AC and DC respectively.
Use these values to set up the default brightness when the backlight
device is registered.
v2: squash in ACPI fix
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
This patch is a dupplicate implementation of 14bcf29b, which we
are reverting due to a regression with kms_plane_cursor IGT tests.
This reverts commit 38e6f715b0.
Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Tested-by: George Zhang <George.zhang@amd.com>
Signed-off-by: Ivan Lipski <ivlipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
This commit introduced a regression with kms_plane_cursor IGT
tests, causing AMD Asics to fail these tests.
This reverts commit ce66ffd981.
Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Tested-by: George Zhang <George.zhang@amd.com>
Signed-off-by: Ivan Lipski <ivlipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We can't read/write to DCN registers while in IPS. Since, that can cause
the system to hang. So, before proceeding with the access in that
scenario, force the system out of IPS.
Cc: stable@vger.kernel.org # 6.6+
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings the following changes:
- Add sequential ONO sequencing for DCN35
- Add new GPINT command definitions
- reduce ODM slice count to initial new dc state only when needed
- Enable copying of bounding box data from VBIOS DMUB
- Guard reading 3DLUT registers for dcn32/dcn35
Reviewed-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There are other factors that determine the number
of DSC slices. The slices should not be determined
in DML but retrieve the value calculated from driver.
[how]
Update the logic to determine DSC slice.
Make DSCDelay per display pipe.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Two additional virtual links are created and thus increasing size
for dc->links by two.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
3DLUT is not part of the DPP on DCN32/DCN35 ASIC and these registers
now exist in MCM state.
[How]
Add guards when reading DPP state based on whether the register has a
valid offset.
Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
In newer DCN's the programming of SYMCLK_FE_SRC_SEL depends on
the value of DIG_FE_SOURCE_SELECT. If DIG_FE_SOURCE_SELECT is not
already programmed at the time of PHY / DIG enable then the FW
sequence will program an incorrect SYMCLK source. Ensure that we
program DIG_FE_SOURCE_SELECT for all DIO scenarios (DVI in this
particular case) before going through the PHY / DIG enable sequence.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds a null check for the 'afb' variable in the
amdgpu_dm_plane_handle_cursor_update function. Previously, 'afb' was
assumed to be null, but was used later in the code without a null check.
This could potentially lead to a null pointer dereference.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1298 amdgpu_dm_plane_handle_cursor_update() error: we previously assumed 'afb' could be null (see line 1252)
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For some panel, it cannot handle pseudo vblank set by otg resync
when leave psr
[How]
The monitor patch will keep otg_on during enter IPS1.
And then we don't need to do otg resync when wake up.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Lewis Huang <lewis.huang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[How&Why]
Once IPS active, all the DCN resources are
not be allowed to access.
It needs to a function for 3rd party to
on/off IPS.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Add 5ms timeout to trigger recovery and force allow P-State in DMUB.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
UCLK and FCLK are updated together, so an FCLK update can also cause UCLK update
to SMU. When this happens, the UCLK provided should be max if switching is
unsupported.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
enc10->base.features.flags.bits.DP_IS_USB_C will be overwritten if we set it
before initializing enc10->base.features
[How]
Determine DP_IS_USB_C after enc10->base.features is initialized. Besides,
bp_cap_info.DP_IS_USB_C will never be set in get_connector_speed_cap_info().
Remove the redudant code.
Reviewed-by: Roman Li <roman.li@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
OPPs couldn't disconnect from the ODM that cause the double buffer pending not being latched due to missing VUPDATE.
[HOW]
Moving memory blanking before OTG turn off to make sure double buffer latched correctly.
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Yihan Zhu <yihan.zhu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The if conditions !A || A && B can be simplified to !A || B.
Fixes the following Coccinelle/coccicheck warnings reported by
excluded_middle.cocci:
WARNING !A || A && B is equivalent to !A || B
WARNING !A || A && B is equivalent to !A || B
WARNING !A || A && B is equivalent to !A || B
Compile-tested only.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. To support multiple PSRSU residency measurement mode
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Jack Chang <jack.chang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
HPD sense changes can occur during low power states and need to be
notified from firmware to driver. Upon notification the hotplug
redetection routines should execute.
[How]
Add Support in DMUB srv and DMUB srv stat for receiving these
notifications. DM can hook them up and process the HPD redetection
once received.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds null checks for the 'stream' and 'plane' variables in
the dcn30_apply_idle_power_optimizations function. These variables were
previously assumed to be null at line 922, but they were used later in
the code without checking if they were null. This could potentially lead
to a null pointer dereference, which would cause a crash.
The null checks ensure that 'stream' and 'plane' are not null before
they are used, preventing potential crashes.
Fixes the below static smatch checker:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:938 dcn30_apply_idle_power_optimizations() error: we previously assumed 'stream' could be null (see line 922)
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:940 dcn30_apply_idle_power_optimizations() error: we previously assumed 'plane' could be null (see line 922)
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
IPX involvment proven to affect LT, causing link loss. Need to prevent
IPX enabled in LT process in which link detect and set mode are main
procedures that have LT taken place.
Reviewed-by: Roman Li <roman.li@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When performing P-State switching with Subvp on 8k (downscaled to 4k).
corruption can be seen on the screen. MALL data was not being fetched
from DC, and the system things there is more MALL space then what is
actually available.
[How]
Read MALL size from dc caps.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Daniel Sa <daniel.sa@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Missing check causes sequence error which results in chroma
filter coefficients not being updated in certain modes
when we display YUV video in fullscreen. This results in
color corruption in video
[How]
Add back chroma_coef_mode check in dscl_set_scl_filter
so that filter coefficients are calculated and updated when
we have YUV surface
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
why:
optc_401_set_drr was using an old optc3 function to update vtotal min and max,
causing crashes when disabling FAMS2
how:
Updated dcn401 to point to opt401 function for vtotal updates. This version of
the function has FAMS2 logic that allows for FAMS2 to be disabled.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Relja Vojvodic <relja.vojvodic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
When checking the subvp type of the previous state we must
pass in current_state to the interface instead of context
otherwise we will get the wrong result.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Refactor code and move fpo_in_use into stream_status to avoid
unexpected changes to previous dc_state (i.e., current_state).
Since stream pointers are shared between current and new dc_states,
updating parameters of one stream will update the other as well
which causes unexpected behaviors (i.e., checking that fpo_in_use
isn't set in previous state and set in the new state is invalid).
To avoid incorrect updates to current_state, move the fpo_in_use flag
into dc_stream_status since stream_status is owned by dc and are not
shared between different dc_states.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Today for MED update type we do not call update clocks. However, for FPO
the assumption is that update clocks should be called to disable P-State
switch before any HW programming since FPO in FW and driver are not
synchronized. This causes an issue where on a MED update, an FPO P-State
switch could be taking place, then driver forces P-State disallow in the below
code and prevents FPO from completing the sequence. In this case we add a check
to avoid re-programming (and thus re-setting) the P-State force register by
only reprogramming if the pipe was not previously Subvp or FPO. The assumption
is that the P-State force register should be programmed correctly the first
time SubVP / FPO was enabled, so there's no need to update / reset it if the
pipe config has never exited SubVP / FPO.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Sometimes read DPCD return fail while result not retrieved yet. Add
retries mechanism in Replay handle hpd irq to get real result.
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Joan Lee <joan.lee@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When an eDP with high clock states is going into s0i3, stream_count is
0. This causes DML to not update the clks to the lowest state and
blocking us to enter s0i3 since eDP is out of vmin.
[How]
When stream_count is 0, set all the clocks to the lowest state.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Page table definition increased up to 2MB.
[How]
Define new use case of page table for VA.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently there's an issue on DCN401 that prevents oled eDP panels from
being lit up that is still under investigation. To unblock dev work
while investigating, we can work around the issue by skipping toggling
the enablement of the backlight.
[How]
- new debug bit that will skip touching backlight enable DPCD for oled
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Add parameters for set_abm_event to enable varibright scaling.
VariBright Scaling is a feature to refer to system states like
1. Power mode
2. Battery Life percent
3. FullScreen video
4. Backlight slider
to adjust variBright strength to get low power or user experience.
[How]
Add parameters of set_abm_event for VB Scaling
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Chun-LiangChang <chuchang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The values calculated in optc1_get_otg_active_size are assigned to the
wrong output parameters, vertical blank is being used for horizontal size
and vice versa. This results in DPG test pattern looking wrong during
hardware init, as the DPG dimensions get assigned from this output, and
potentially other issues.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
When updating clocks via SMU, DAL needs to wait for requests to be fulfilled
before proceeding.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In order to support glitchless display clock ramping for virtual stream,
we must
turn on symclk for stream encoder. The code will power on phy and enable
symclk
for dio encoder during virtual stream dpms sequence.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Vbios & Driver have difference pixel rate div policy.
When enabling fast boot & performing blank & unblank w/o timing setting,
pixel clock & pixel rate dividor are not match.
It would cause too high pixel reate and eDP would be black screen.
[How]
We would keep pixel rate div setting by Vbios until next timing setting.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: yi-lchen <yi-lchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are a few spelling mistakes in dml2_printf messages. Fix them.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently when one enables driver debugging dmesg gets spammed, at I
suspect vblank rate, with messages like:
[drm:amdgpu_dm_atomic_check [amdgpu]] MPO enablement requested on crtc:[00000000f073c3bb]
Fix if by converting some logging from deprecated and incorrect
DRM_DEBUG_DRIVER to drm_dbg_atomic. Plus some localized drive-by changes
to drm_dbg_kms.
By no means an exhaustive conversion but at least it allows turning on
driver debug selectively.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The scaler_data structure is implicitly copied onto the stack twice by
being returned from a function. This is usually a bad idea, but it
was not flagged by the compiler until a recent addition that pushed
it over the 1024 byte function stack limit:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_translation_helper.c: In function 'populate_dml_plane_cfg_from_plane_state':
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_translation_helper.c:1075:1: error: the frame size of 1032 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Use an explicit kzalloc() and memcpy() instead here to keep it off the
stack.
Fixes: 00c391102a ("drm/amd/display: Add misc DC changes for DCN401")
Fixes: 7966f319c6 ("drm/amd/display: Introduce DML2")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Putting excessively large objects on a function stack causes
a warning about possibly overflowing the 8KiB of kernel stack:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn401/dcn401_resource.c: In function 'dcn401_update_bw_bounding_box':
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn401/dcn401_resource.c:1599:1: error: the frame size of 1196 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
1599 | }
| ^
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_state.c: In function 'dc_state_create':
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_state.c:221:1: error: the frame size of 1196 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
221 | }
| ^
Use dynamic allocation instead.
Fixes: e779f4587f ("drm/amd/display: Add handling for DC power mode")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The graphics_object_id structure is meant to fit into 32 bits, as it's
passed by value in and out of functions. A recent change increased
the size to 128 bits, so it's now always passed by reference, which
is clearly not intended and ends up producing a compile-time warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_factory.c: In function 'construct_phy':
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_factory.c:743:1: error: the frame size of 1040 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Add back the bitfields to revert to the original size, while keeping
the 'enum' type change.
Fixes: fec85f995a ("drm/amd/display: Fix compiler redefinition warnings for certain configs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This structure is too large to fit on a stack, as shown by the
newly introduced warnings from a recent code change:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn32/dcn32_resource.c: In function 'dcn32_update_bw_bounding_box':
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn32/dcn32_resource.c:2019:1: error: the frame size of 1180 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn321/dcn321_resource.c: In function 'dcn321_update_bw_bounding_box':
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn321/dcn321_resource.c:1597:1: error: the frame size of 1180 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_state.c: In function 'dc_state_create':
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_state.c:219:1: error: the frame size of 1184 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Instead of open-coding the assignment of a large structure to a stack
variable, use an explicit kmemdup() in each case to move it off the stack.
Fixes: e779f4587f ("drm/amd/display: Add handling for DC power mode")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allocate some memory, send the address in chunks to dmub, and finally
ask it to copy the bounding box data into the newly allocated memory.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New commands for enabling copy of DC bounding box values from VBIOS DMUB
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move creation of CGS device node and the DAL allocation list from
amdgpu_dm_init() to dm_sw_init() which runs before dmub's sw init hook.
This is required for communicating with the VBIOS DMUB image from the
VBIOS that was loaded for early pre-os boot.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When ODM slice happens on DCN401, there is a null pointer exception
caused by that. This commit address this issue by checking if the
required data structures are initialized.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All the DC_FP_START/END should be used before call anything from DML2,
for this reason, the use of those guards inside DML it is not correct.
This commit removes two unnecessary DC_FP_START/END from a dml2
function.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCN401 is using DCN 320 headers, which does not have all the right
registers for DCN401. This commit just replace DCN320 includes with the
one from DCN410.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop the extra HPD irq entry for DCN401.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Most of the DML code is generated, and it is necessary to update some
parts of it from time to time. This commit brings the latest generated
code for DML 2.1.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
cleaning up the code refactor requires hubp to be in its own component.
[how]
move all files under newly created hubp folder and fixing the makefiles.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Pinninti <bpinnint@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit removes some unused code with the required adjustments.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Enable sharpener support for DCN401
[How]
- Removed memcmp check that was preventing ISHARP from being enabled.
- Add missing ISHARP register defines, masks, and writes.
- Add programming of Blur and Scale coefficients.
- Program FMT_MODE and NLDELTA registers based on LLS_PREF and pixel
- format
- Only enable ISHARP for YUV420
- Add disabling of ISHARP
- Add debug flags and registry keys for debugging ISHARP.
- Set default to medium level
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Incorrect cursor position calculation in some scenarios. Also for
mirror and rotation cases.
[How]
Fix for incorrect cursor position. Added new test scenarios for diags
cursor test. Updated CRC for few of the diags cursor test scenarios.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Sridevi <sarvinde@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
nouveau:
- fix bo metadata uAPI for vm bind
panthor:
- Fixes for panthor's heap logical block.
- Reset on unrecoverable fault
- Fix VM references.
- Reset fix.
xlnx:
- xlnx compile and doc fixes.
amdgpu:
- Handle vbios table integrated info v2.3
amdkfd:
- Handle duplicate BOs in reserve_bo_and_cond_vms
- Handle memory limitations on small APUs
dp/mst:
- MST null deref fix.
bridge:
- Don't let next bridge create connector in adv7511 to make probe work.
-----BEGIN PGP SIGNATURE-----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=pexB
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-05-25' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Some fixes for the end of the merge window, mostly amdgpu and panthor,
with one nouveau uAPI change that fixes a bad decision we made a few
months back.
nouveau:
- fix bo metadata uAPI for vm bind
panthor:
- Fixes for panthor's heap logical block.
- Reset on unrecoverable fault
- Fix VM references.
- Reset fix.
xlnx:
- xlnx compile and doc fixes.
amdgpu:
- Handle vbios table integrated info v2.3
amdkfd:
- Handle duplicate BOs in reserve_bo_and_cond_vms
- Handle memory limitations on small APUs
dp/mst:
- MST null deref fix.
bridge:
- Don't let next bridge create connector in adv7511 to make probe
work"
* tag 'drm-next-2024-05-25' of https://gitlab.freedesktop.org/drm/kernel:
drm/amdgpu/atomfirmware: add intergrated info v2.3 table
drm/mst: Fix NULL pointer dereference at drm_dp_add_payload_part2
drm/amdkfd: Let VRAM allocations go to GTT domain on small APUs
drm/amdkfd: handle duplicate BOs in reserve_bo_and_cond_vms
drm/bridge: adv7511: Attach next bridge without creating connector
drm/buddy: Fix the warn on's during force merge
drm/nouveau: use tile_mode and pte_kind for VM_BIND bo allocations
drm/panthor: Call panthor_sched_post_reset() even if the reset failed
drm/panthor: Reset the FW VM to NULL on unplug
drm/panthor: Keep a ref to the VM at the panthor_kernel_bo level
drm/panthor: Force an immediate reset on unrecoverable faults
drm/panthor: Document drm_panthor_tiler_heap_destroy::handle validity constraints
drm/panthor: Fix an off-by-one in the heap context retrieval logic
drm/panthor: Relax the constraints on the tiler chunk size
drm/panthor: Make sure the tiler initial/max chunks are consistent
drm/panthor: Fix tiler OOM handling to allow incremental rendering
drm: xlnx: zynqmp_dpsub: Fix compilation error
drm: xlnx: zynqmp_dpsub: Fix few function comments
MST colorspace property support was disabled due to a series of warnings
that came up when the device was plugged in since the properties weren't
made at device creation. Create the properties in advance instead.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 69a9596102 ("drm/amd/display: Temporary Disable MST DP Colorspace Property").
Reported-and-tested-by: Tyler Schneider <tyler.schneider@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3353
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The __assign_str() macro logic of the TRACE_EVENT() macro was optimized so
that it no longer needs the second argument. The __assign_str() is always
matched with __string() field that takes a field name and the source for
that field:
__string(field, source)
The TRACE_EVENT() macro logic will save off the source value and then use
that value to copy into the ring buffer via the __assign_str(). Before
commit c1fa617cae ("tracing: Rework __assign_str() and __string() to not
duplicate getting the string"), the __assign_str() needed the second
argument which would perform the same logic as the __string() source
parameter did. Not only would this add overhead, but it was error prone as
if the __assign_str() source produced something different, it may not have
allocated enough for the string in the ring buffer (as the __string()
source was used to determine how much to allocate)
Now that the __assign_str() just uses the same string that was used in
__string() it no longer needs the source parameter. It can now be removed.
-----BEGIN PGP SIGNATURE-----
iIkEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZk9RMBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qur+AP9jbSYaGhzZdJ7a3HGA8M4l6JNju8nC
GcX1JpJT4z1qvgD3RkoNvP87etDAUAqmbVhVWnUHCY/vTqr9uB/gqmG6Ag==
=Y+6f
-----END PGP SIGNATURE-----
Merge tag 'trace-assign-str-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing cleanup from Steven Rostedt:
"Remove second argument of __assign_str()
The __assign_str() macro logic of the TRACE_EVENT() macro was
optimized so that it no longer needs the second argument. The
__assign_str() is always matched with __string() field that takes a
field name and the source for that field:
__string(field, source)
The TRACE_EVENT() macro logic will save off the source value and then
use that value to copy into the ring buffer via the __assign_str().
Before commit c1fa617cae ("tracing: Rework __assign_str() and
__string() to not duplicate getting the string"), the __assign_str()
needed the second argument which would perform the same logic as the
__string() source parameter did. Not only would this add overhead, but
it was error prone as if the __assign_str() source produced something
different, it may not have allocated enough for the string in the ring
buffer (as the __string() source was used to determine how much to
allocate)
Now that the __assign_str() just uses the same string that was used in
__string() it no longer needs the source parameter. It can now be
removed"
* tag 'trace-assign-str-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/treewide: Remove second parameter of __assign_str()
MST colorspace property support was disabled due to a series of warnings
that came up when the device was plugged in since the properties weren't
made at device creation. Create the properties in advance instead.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 69a9596102 ("drm/amd/display: Temporary Disable MST DP Colorspace Property").
Reported-and-tested-by: Tyler Schneider <tyler.schneider@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3353
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The fix involves adding a null check for 'stream' at the beginning of
the function. If 'stream' is NULL, the function immediately returns
false. This ensures that 'stream' is not NULL when we dereference it to
access 'ctx' in 'dc = stream->ctx->dc;' the function.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:398 dc_stream_program_cursor_position()
error: we previously assumed 'stream' could be null (see line 397)
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c
389 bool dc_stream_program_cursor_position(
390 struct dc_stream_state *stream,
391 const struct dc_cursor_position *position)
392 {
393 struct dc *dc;
394 bool reset_idle_optimizations = false;
395 const struct dc_cursor_position *old_position;
396
397 old_position = stream ? &stream->cursor_position : NULL;
^^^^^^^^
The patch adds a NULL check
--> 398 dc = stream->ctx->dc;
^^^^^^^^
The old code didn't check
399
400 if (dc_stream_set_cursor_position(stream, position)) {
401 dc_z10_restore(dc);
402
403 /* disable idle optimizations if enabling cursor */
404 if (dc->idle_optimizations_allowed &&
405 (!old_position->enable || dc->debug.exit_idle_opt_for_cursor_updates) &&
406 position->enable) {
407 dc_allow_idle_optimizations(dc, false);
Fixes: f63f86b5af ("drm/amd/display: Separate setting and programming of cursor")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Errors in amdgpu_dm_init() are silently ignored and dm_hw_init()
will succeed. However often these are fatal errors and it would
be better to pass them up.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit modifies the construct_phy function to handle the case where
`bios->integrated_info` is NULL and to address a compiler warning about
a large stack allocation.
Upon examination, it was found that the local `integrated_info`
structure was just used to copy values which is large and was being
declared directly on the stack which could potentially lead to
performance issues. This commit changes the code to use
`bios->integrated_info` directly, which avoids the need for a large
stack allocation.
The function now checks if `bios->integrated_info` is NULL before
entering a for loop that uses it. If `bios->integrated_info` is NULL,
the function skips the for loop and continues executing the rest of the
code. This ensures that the function behaves correctly when
`bios->integrated_info` is NULL and improves compatibility with dGPUs.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_factory.c: In function ‘construct_phy’:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_factory.c:743:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=]
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Jerry Zuo <jerry.zuo@amd.com>
Cc: Qingqing Zhuo <qingqing.zhuo@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
'dc_reg_sequence' was added in
commit 44788bbc30 ("drm/amd/display: refactor reg_update")
but isn't actually used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'aux_payloads' is unused since
commit eae5ffa9bd ("drm/amd/display: Switch ddc to new aux interface")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version pairs with DMUB FW Release 0.0.218.0 for dcn314/315/316, dcn35/351, dcn401
and brings along the following:
- Fix powerpc compilation
- Fix TBT+TypeC Daisy-chain lightup
- Fix ODM combine setup
- Fix OTC underflow on dcn35
- Fix DVI config for dcn401
- Add ips status info to debugfs
- Add 3DLUT DMA load trigger
- Modify clock programming to support DPM
- Disable dcn401 idle optimizations
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Compilation errors while compiling without CONFIG_DRM_AMD_DC_FP:
"undefined reference to `dc_bandwidth_in_kbps_from_timing'"
[How]
Fix Makefile to move dsc files out of DC_FP guard.
Fixes: 00c391102a ("drm/amd/display: Add misc DC changes for DCN401")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When the link BW is smaller than the request BW,
the DP LT just kept running and fallback to lower link config.
DP LT just aborted if is_hpd_pending bit is high.
But is_hpd_pending bit indicates a new HPD event received.
It doesn't mean the HPD is low.
[How]
Abort the DP LT if the link BW is smaller than the request BW.
Remove checking is_hpd_pending bit in DP LT.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Cruise <cruise.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
At the time of block sequence construction, the exact reference DPP/DISP clock is
not yet known, so the clock should be passed by reference to the DTO programming
function.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Disable to improve stability for now.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
There is a corner case where we're in an ODM config that
has recout.x != 0. In these scenarios we have to take into
account the extra offset in the ODM adjustment for cursor.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
A recent change for ODM combine refactor contains a typo which causes ODM
combine mode programmed incorrectly.
Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Disable idle optimization for each atomic commit is unnecessary,
and can lead to a potential race condition.
[How]
Remove idle optimization check from amdgpu_dm_atomic_commit_tail()
Fixes: 196107eb1e ("drm/amd/display: Add IPS checks before dcn register access")
Cc: stable@vger.kernel.org
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Missing check for when there is new pipe configuration but both cur_pipe
and new_pipe are both populated causing update_state of DSC for that
instance not being updated correctly.
This causes some display mode changes to cause underflow since DSCCLK
is still gated when the display requires DSC.
[How]
Added another condition in the new pipe addition branch that checks if
there is a new pipe configuration and if it is not the same as cur_pipe.
cur_pipe does not necessarily have to be NULL to go in this branch.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For debugging and testing purposes.
[How]
If IPS is supported create ips_status debugfs entry.
Usage: cat /sys/kernel/debug/dri/0/amdgpu_dm_ips_status
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Reset the shared dmub firmware region on dmub hw init to start with
known state.
[How]
Memset the shared region to 0 in dmub_hw_init().
Suggested-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Need to be able to trigger a DMA load to update 3DLUT contents in MPC.
Adding a HWSS function to serve as the trigger.
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DML 2.1 allocates two types of memory in its ctx structure but does not
destroy them, causing memory leak whenever DML 2.1 instance is created
and destroyed.
[How]
Deallocate two instances of allocated memory whenever DML 2.1 is
destroyed.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to select DTBCLK and DPREFCLK as DTBCLK_p source according to
hardware guidance.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Cleaning up the code refactor requires hubbub to be in its own
component.
[how]
Move all DCN401 files under newly created hubbub folder and fixing the
makefiles.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Harikrishna Revalla <Harikrishna.Revalla@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Enable adaptive scaler support for DCN401
[How]
- Enable build flag for SPL
- Set prefer_easf flag to true
- Apply light linear scaling policy based on transfer function and pixel
format. Choose between linear or non-linear scaling
- Set matrix_mode based on pixel format
- Disable ring estimator
- Add missing EASF register defines, masks, and writes
- Disable EASF if scale ratio or number of taps is unsupported and when
bypassing the scaler
- Add debug flags and registry keys for debugging SPL and EASF
- Add support for Visual Confirm with EASF
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes indentations and adjust spaces for better readability and
code styles.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DVI is TMDS signal like HDMI but without audio. Current signal check
does not correctly reflect DVI clock programming.
[How]
Define a new signal check for TMDS that includes DVI to HDMI TMDS
programming.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The comparisons intend to be DCN401 inclusive, and fix it by adding
equal signs.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The functions are missing. These two functions are required to support
MST.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function that commits planes calls the same set of functions twice,
and in the case of the FAMs utilization, it is not desired to call the
dmub, hwss_build and hwss_execute. This commit just removes the
unnecessary calls to those functions.
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move dsc functions from dc.c to dc_dsc.c.
Co-developed-by: George Shen <george.shen@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now that all previously-supported architectures select
ARCH_HAS_KERNEL_FPU_SUPPORT, this code can depend on that symbol instead
of the existing list of architectures. It can also take advantage of the
common kernel-mode FPU API and method of adjusting CFLAGS.
Link: https://lkml.kernel.org/r/20240329072441.591471-14-samuel.holland@sifive.com
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: WANG Xuerui <git@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The compiler flags enable altivec, but that is not required; hard-float is
sufficient for the code to build and function.
Drop altivec from the compiler flags and adjust the enable/disable code to
only enable FPU use.
Link: https://lkml.kernel.org/r/20240329072441.591471-13-samuel.holland@sifive.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: WANG Xuerui <git@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The parameters segment_width and last_segment_width are used to control
the configuration of the Output Plane Processor (OPP), specifically the
width of each segment that the display is divided into and the width of
the last segment
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/optc/dcn35/dcn35_optc.c:59: warning: Function parameter or struct member 'segment_width' not described in 'optc35_set_odm_combine'
drivers/gpu/drm/amd/amdgpu/../display/dc/optc/dcn35/dcn35_optc.c:59: warning: Function parameter or struct member 'last_segment_width' not described in 'optc35_set_odm_combine'
drivers/gpu/drm/amd/amdgpu/../display/dc/optc/dcn35/dcn35_optc.c:59: warning: Excess function parameter 'timing' description in 'optc35_set_odm_combine'
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The pixel_clock_mhz property is populated in amdgpu_dm when Freesync is setup,
but it is not used anywhere in amdgpu_dm. Remove the dead code.
Cc: chiahsuan.chung@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix most of the display documentation compile warnings by
documenting struct mpc_funcs functions in dc/inc/hw/mpc.h file.
Remove the following warnings:
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'read_mpcc_state' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'mpc_init_single_inst' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'get_mpcc_for_dpp_from_secondary' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'get_mpcc_for_dpp' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'wait_for_idle' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'assert_mpcc_idle_before_connect' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'init_mpcc_list_from_hw' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_denorm' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_denorm_clamp' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_output_csc' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_ocsc_default' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_output_gamma' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'power_on_mpc_mem_pwr' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_dwb_mux' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'disable_dwb_mux' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'is_dwb_idle' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_out_rate_control' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_gamut_remap' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'program_1dlut' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'program_shaper' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'acquire_rmu' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'program_3dlut' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'release_rmu' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'get_mpc_out_mux' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_bg_color' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_mpc_mem_lp_mode' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'set_movable_cm_location' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'update_3dlut_fast_load_select' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'get_3dlut_fast_load_status' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'populate_lut' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'program_lut_read_write_control' not described in 'mpc_funcs'
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:579: warning: Function parameter or struct member 'program_lut_mode' not described in 'mpc_funcs'
Fixes: b8c1c3a82e ("Documentation/gpu: Add kernel doc entry for MPC")
Closes: https://lore.kernel.org/linux-next/20240130134954.04fcf763@canb.auug.org.au/
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Marcelo Mendes Spessoto Junior <marcelomspessoto@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
new drivers:
- panthor: ARM Mali/Immortalis CSF-based GPU driver
core:
- add a CONFIG_DRM_WERROR option
- make more headers self-contained
- grab resv lock in pin/unpin
- fix vmap resv locking
- EDID/eDP panel matching
- Kconfig cleanups
- DT sound bindings
- Add SIZE_HINTS property for cursor planes
- Add struct drm_edid_product_id and helpers.
- Use drm device based logging in more drm functions.
- drop seq_file.h from a bunch of places
- use drm_edid driver conversions
dp:
- DP Tunnel documentation
- MST read sideband cap
- Adaptive sync SDP prep work
ttm:
- improve placement for TTM BOs in idle/busy handling
panic:
- Fixes for drm-panic, and option to test it.
- Add drm panic to simpledrm, mgag200, imx, ast
bridge:
- improve init ordering
- adv7511: allow GPIO pin sharing
- tc358775: add tc358675 support
panel:
- AUO B120XAN01.0
- Samsung s6e3fa7
- BOE NT116WHM-N44
- CMN N116BCA-EA1,
- CrystalClear CMT430B19N00
- Startek KD050HDFIA020-C020A
- powertip PH128800T006-ZHC01
- Innolux G121X1-L03
- LG sw43408
- Khadas TS050 V2
- EDO RM69380 OLED
- CSOT MNB601LS1-1
amdgpu:
- HDCP/ODM/RAS fixes
- Devcoredump improvements
- Expose VCN activity via sysfs
- SMY 13.0.x updates
- Enable fast updates on DCN 3.1.4
- Add dclk and vclk reporting on additional devices
- Add ACA RAS infrastructure
- Implement TLB flush fence
- EEPROM handling fixes
- SMUIO 14.0.2 support
- SMU 14.0.1 Updates
- SMU 14.0.2 support
- Sync page table freeing with TLB flushes
- DML2 refactor
- DC debug improvements
- DCN 3.5.x Updates
- GPU reset fixes
- HDP fix for second GFX pipe on GC 10.x
- Enable secondary GFX pipe on GC 10.3
- Refactor and clean up BACO/BOCO/BAMACO handling
- Remove invalid TTM resource start check
- UAF fix in VA IOCTL
- GPUVM page fault redirection to secondary IH rings for IH 6.x
- Initial support for mapping kernel queues via MES
- Fix VRAM memory accounting
amdkfd:
- MQD handling cleanup
- Preemption handling fixes for XCDs
- TLB flush fix for GC 9.4.2
- Properly clean up workqueue during module unload
- Fix memory leak process create failure
- Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace
- Fix eviction fence handling
- Fix leak in GPU memory allocation failure case
- DMABuf import handling fix
- Enable SQ watchpoint for gfx10
i915:
- Adding new DG2 PCI ID
- add context hints for GT frequency
- enable only one CCS for compute workloads
- new workarounds
- Fix UAF on destroy against retire race and remove two earlier partial fixes
- Limit the reserved VM space to only the platforms that need it
- Fix gt reset with GuC submission is disable
- Add and use gt_to_guc() wrapper
i915/xe display:
- Lunar Lake display enabling, including cdclk and other refactors
- BIOS/VBT/opregion related refactor
- Digital port related refactor/clean-up
- Fix 2s boot time regression on DP panel replay init
- Remove duplication on audio enable/disable on SDVO and g4x+ DP
- Disable AuxCCS framebuffers if built for Xe
- Make crtc disable more atomic
- Increase DP idle pattern wait timeout to 2ms
- Start using container_of_const() for some extra const safety
- Fix Jasper Lake boot freeze
- Enable MST mode for 128b/132b single-stream sideband
- Enable Adaptive Sync SDP Support for DP
- Fix MTL supported DP rates - removal of UHBR13.5
- PLL refactoring
- Limit eDP MSO pipe only for display version 20
- More display refactor towards independence from i915 dev_priv
- Convert i915/xe fbdev to DRM client
- More initial work to make display code more independent from i915
xe:
- improved error capture
- clean up some uAPI leftovers
- devcoredump update
- Add BMG mocs table
- Handle GSCCS ER interrupt
- Implement xe2- and GuC workarounds
- struct xe_device cleanup
- Hwmon updates
- Add LRC parsing for more GPU instruction
- Increase VM_BIND number of per-ioctl Ops
- drm/xe: Add XE_BO_GGTT_INVALIDATE flag
- Initial development for SR-IOV support
- Add new PCI IDs to DG2 platform
- Move userptr over to start using hmm_range_fault
msm:
- Switched to generating register header files during build process
instead of shipping pre-generated headers
- Merged DPU and MDP4 format databases.
- DP:
- Stop using compat string to distinguish DP and eDP cases
- Added support for X Elite platform (X1E80100)
- Reworked DP aux/audio support
- Added SM6350 DP to the bindings
- GPU:
- a7xx perfcntr reg fixes
- MAINTAINERS updates
- a750 devcoredump support
radeon:
- Silence UBSAN warnings related to flexible arrays
nouveau:
- move some uAPI objects to uapi headers
omapdrm:
- console fix
ast:
- add i2c polling
qaic:
- add debugfs entries
exynos:
- fix platform_driver .owner
- drop cleanup code
mediatek:
- Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe()
- Add GAMMA 12-bit LUT support for MT8188
- Rename mtk_drm_* to mtk_*
- Drop driver owner initialization
- Correct calculation formula of PHY Timing
-----BEGIN PGP SIGNATURE-----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=ocVM
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"This is the main pull request for the drm subsystems for 6.10.
In drivers the main thing is a new driver for ARM Mali firmware based
GPUs, otherwise there are a lot of changes to amdgpu/xe/i915/msm and
scattered changes to everything else.
In the core a bunch of headers and Kconfig was refactored, along with
the addition of a new panic handler which is meant to provide a user
friendly message when a panic happens and graphical display is
enabled.
New drivers:
- panthor: ARM Mali/Immortalis CSF-based GPU driver
Core:
- add a CONFIG_DRM_WERROR option
- make more headers self-contained
- grab resv lock in pin/unpin
- fix vmap resv locking
- EDID/eDP panel matching
- Kconfig cleanups
- DT sound bindings
- Add SIZE_HINTS property for cursor planes
- Add struct drm_edid_product_id and helpers.
- Use drm device based logging in more drm functions.
- drop seq_file.h from a bunch of places
- use drm_edid driver conversions
dp:
- DP Tunnel documentation
- MST read sideband cap
- Adaptive sync SDP prep work
ttm:
- improve placement for TTM BOs in idle/busy handling
panic:
- Fixes for drm-panic, and option to test it.
- Add drm panic to simpledrm, mgag200, imx, ast
bridge:
- improve init ordering
- adv7511: allow GPIO pin sharing
- tc358775: add tc358675 support
panel:
- AUO B120XAN01.0
- Samsung s6e3fa7
- BOE NT116WHM-N44
- CMN N116BCA-EA1,
- CrystalClear CMT430B19N00
- Startek KD050HDFIA020-C020A
- powertip PH128800T006-ZHC01
- Innolux G121X1-L03
- LG sw43408
- Khadas TS050 V2
- EDO RM69380 OLED
- CSOT MNB601LS1-1
amdgpu:
- HDCP/ODM/RAS fixes
- Devcoredump improvements
- Expose VCN activity via sysfs
- SMY 13.0.x updates
- Enable fast updates on DCN 3.1.4
- Add dclk and vclk reporting on additional devices
- Add ACA RAS infrastructure
- Implement TLB flush fence
- EEPROM handling fixes
- SMUIO 14.0.2 support
- SMU 14.0.1 Updates
- SMU 14.0.2 support
- Sync page table freeing with TLB flushes
- DML2 refactor
- DC debug improvements
- DCN 3.5.x Updates
- GPU reset fixes
- HDP fix for second GFX pipe on GC 10.x
- Enable secondary GFX pipe on GC 10.3
- Refactor and clean up BACO/BOCO/BAMACO handling
- Remove invalid TTM resource start check
- UAF fix in VA IOCTL
- GPUVM page fault redirection to secondary IH rings for IH 6.x
- Initial support for mapping kernel queues via MES
- Fix VRAM memory accounting
amdkfd:
- MQD handling cleanup
- Preemption handling fixes for XCDs
- TLB flush fix for GC 9.4.2
- Properly clean up workqueue during module unload
- Fix memory leak process create failure
- Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace
- Fix eviction fence handling
- Fix leak in GPU memory allocation failure case
- DMABuf import handling fix
- Enable SQ watchpoint for gfx10
i915:
- Adding new DG2 PCI ID
- add context hints for GT frequency
- enable only one CCS for compute workloads
- new workarounds
- Fix UAF on destroy against retire race and remove two earlier partial fixes
- Limit the reserved VM space to only the platforms that need it
- Fix gt reset with GuC submission is disable
- Add and use gt_to_guc() wrapper
i915/xe display:
- Lunar Lake display enabling, including cdclk and other refactors
- BIOS/VBT/opregion related refactor
- Digital port related refactor/clean-up
- Fix 2s boot time regression on DP panel replay init
- Remove duplication on audio enable/disable on SDVO and g4x+ DP
- Disable AuxCCS framebuffers if built for Xe
- Make crtc disable more atomic
- Increase DP idle pattern wait timeout to 2ms
- Start using container_of_const() for some extra const safety
- Fix Jasper Lake boot freeze
- Enable MST mode for 128b/132b single-stream sideband
- Enable Adaptive Sync SDP Support for DP
- Fix MTL supported DP rates - removal of UHBR13.5
- PLL refactoring
- Limit eDP MSO pipe only for display version 20
- More display refactor towards independence from i915 dev_priv
- Convert i915/xe fbdev to DRM client
- More initial work to make display code more independent from i915
xe:
- improved error capture
- clean up some uAPI leftovers
- devcoredump update
- Add BMG mocs table
- Handle GSCCS ER interrupt
- Implement xe2- and GuC workarounds
- struct xe_device cleanup
- Hwmon updates
- Add LRC parsing for more GPU instruction
- Increase VM_BIND number of per-ioctl Ops
- drm/xe: Add XE_BO_GGTT_INVALIDATE flag
- Initial development for SR-IOV support
- Add new PCI IDs to DG2 platform
- Move userptr over to start using hmm_range_fault
msm:
- Switched to generating register header files during build process
instead of shipping pre-generated headers
- Merged DPU and MDP4 format databases.
- DP:
- Stop using compat string to distinguish DP and eDP cases
- Added support for X Elite platform (X1E80100)
- Reworked DP aux/audio support
- Added SM6350 DP to the bindings
- GPU:
- a7xx perfcntr reg fixes
- MAINTAINERS updates
- a750 devcoredump support
radeon:
- Silence UBSAN warnings related to flexible arrays
nouveau:
- move some uAPI objects to uapi headers
omapdrm:
- console fix
ast:
- add i2c polling
qaic:
- add debugfs entries
exynos:
- fix platform_driver .owner
- drop cleanup code
mediatek:
- Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe()
- Add GAMMA 12-bit LUT support for MT8188
- Rename mtk_drm_* to mtk_*
- Drop driver owner initialization
- Correct calculation formula of PHY Timing"
* tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel: (1477 commits)
drm/xe/ads: Use flexible-array
drm/xe: Use ordered WQ for G2H handler
drm/msm/gen_header: allow skipping the validation
drm/msm/a6xx: Cleanup indexed regs const'ness
drm/msm: Add devcoredump support for a750
drm/msm: Adjust a7xx GBIF debugbus dumping
drm/msm: Update a6xx registers XML
drm/msm: Fix imported a750 snapshot header for upstream
drm/msm: Import a750 snapshot registers from kgsl
MAINTAINERS: Add Konrad Dybcio as a reviewer for the Adreno driver
MAINTAINERS: Add a separate entry for Qualcomm Adreno GPU drivers
drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails
drm/msm/adreno: fix CP cycles stat retrieval on a7xx
drm/msm/a7xx: allow writing to CP_BV counter selection registers
drm: zynqmp_dpsub: Always register bridge
Revert "drm/bridge: ti-sn65dsi83: Fix enable error path"
drm/fb_dma: Add checks in drm_fb_dma_get_scanout_buffer()
drm/fbdev-generic: Do not set physical framebuffer address
drm/panthor: Fix the FW reset logic
drm/panthor: Make sure we handle 'unknown group state' case properly
...
OLED panels don't support the ABM, they shouldn't offer the
panel_power_savings attribute to the user. Check whether aux BL
control support was enabled to decide whether to offer it.
Reported-by: Gergo Koteles <soyer@irl.hu>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3359
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Gergo Koteles <soyer@irl.hu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit c49e44ede5.
This causes regression on DP link layer test.
Reported-by: Mark Broadworth <Mark.Broadworth@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Read default boot options
- Find max flickerless instant vtotal delta
- Refactor dcn401_update_clocks
- Reduce I2C speed to 95kHz in DCN401
- Allow higher DSC slice support for small timings on dcn401
- Don't offload flip if not only address update
- Check UHBR13.5 cap when determining max link cap
- Enable SYMCLK gating in DCCG
- Expand to higher link rates
- Add left edge pixel for YCbCr422/420 + ODM pipe split
- Add resource interfaces for get ODM slice rect
- Add COEF filter types for DCN401
- Refactor DCN401 DCCG into component directory
- Fix 3dlut size for Fastloading on DCN401
- Fix write to non-existent reg on DCN401
- Remove USBC check for DCN32
- Remove unused code for some dc files
- Disable AC/DC codepath when unnecessary
- Create dcn401_clk_mgr struct
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DPIA boot option is set by VBIOS. It gets
overwritten when driver loads DMU.
[HOW]
Read PreOS boot options and determine if
dpia is enabled.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
- Populate dml 2 callback with get_max_flickerless_instant_vtotal_increase
- Use long long when necessary to prevent overflow
- Add asic specific default values, currently disabled by
default for every asic
- Use the pre-existing debug option to protect the call to
get_max_flickerless_instant_vtotal_increase
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ethan Bitnun <etbitnun@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Refactor complex code into manageable functions. This also cleans up
some updating logics.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
HW for DCN401 is presented with a small I2C speed fluctuation that
exceeds the hard cap limitation of 100kHz occasionally. This violates
compliance requirement and will result in failure in compliance.
[HOW]
After various measurements and traceback to previous generation HW, DCN IP,
SI and SW driver agrees that we can reduce I2C speed to 95kHz to address
the I2C spped fluctuation in DCN401.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DML2.1 has added the support to determine ODM combine based on DSC slice
count limitation. This support would allow us to support DSC slice higher
than 4 on small timings. The change will allow higher DSC slice support
independent from pixel clock in use.
[HOW]
Add a DCN401 get_enc_caps function to allow the support for DSC slice count
higher than 4.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
Fast updates can consist of some stream updates as well (i.e., out_csc).
In these cases we should not offload the flip to FW as we can only
offload address only updates to FW.
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
UHBR13.5 support is optional, even if UHBR20 is supported by the device.
If source supports max UHBR13.5 while sink, cable and LTTPR support
UHBR20 but not UHBR13.5, UHBR10 should be used as the max link cap.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Enable root clock optimization for SYMCLK and only
disable it when it's actively used.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
To support higher link rates that sink allows, we need to make
sure driver is ready and perform correct link-training sequence.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Currently 3-tap chroma subsampling is used for YCbCr422/420. When ODM
pipesplit is used, pixels on the left edge of ODM slices need one extra
pixel from the right edge of the previous slice to calculate the correct
chroma value.
Without this change, the chroma value is slightly different than
expected. This is usually imperceptible visually, but it impacts test
pattern CRCs for compliance test automation.
[HOW]
Update logic to use the register for adding extra left edge pixel for
YCbCr422/420 ODM cases.
Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We need an unified location to perform ODM slice rect calculation.
[HOW]
Add three interfaces for ODM slice rect/width calucaltion in resource.h
Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add VERTICAL_BLUR_SCALE & HORIZONTAL_BLUR_SCALE types.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Clean up the code that requires dccg to be in its own component.
[HOW]
Move all files under newly created dccg dir and fix the makefiles.
Acked-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Revalla Hari Krishna <Harikrishna.Revalla@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
After a non-3dlut test the MPCC_MCM_3DLUT_MODE::MPCC_MCM_3DLUT_SIZE is
incorrect.
[HOW]
Add register write to make valid.
Acked-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Adam Nelson <adnelson@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The CONNECTOR_ID_USBC check was removed to fix a regression, but it was
re-introduced by accident. This commit drops the USBC that causes the
regressions.
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
If there are no DC clock limits present, or if the DC limits are the same
as the AC limits, we can disable the AC/DC codepath as there won't be any
validation differences between the two modes.
[HOW]
When all DC power mode clock limits are the same as the max clock
values, there won't be any difference between AC mode and DC mode. Zero
out DC limits that equal max and provide a new cap to indicate the
presence of any non-zero DC mode limit. In summary:
- zero out DC limits that are the same as max clock value
- new dc cap to indicate the presence of DC mode limits
- set limits present if any clock has distinct AC and DC values from SMU
Acked-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create dcn401 specific structure to encapsulate version specific
variables.
Acked-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some older MST hubs do not report DPCD registers according to
specification.
[How]
This change re-applies commit c536555451 ("drm/amd/display: dsc mst
re-compute pbn for changes on hub").
With an additional check for these older MST devices.
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Idle optimizations are blocked if there's more than one eDP connector
on the board - blocking S0i3 and IPS2 for static screen.
[How]
Fix the checks to correctly detect number of active eDP.
Also restrict the eDP support to panels that have correct feature
support.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This fixes a bug introduced by commit c536555451 ("drm/amd/display: dsc
mst re-compute pbn for changes on hub").
The change caused light-up issues with a second display that required
DSC on some MST docks.
[How]
Use Virtual DPCD for DSC caps in MST case.
[Limitations]
This change only affects MST DSC devices that follow specifications
additional changes are required to check for old MST DSC devices such as
ones which do not check for Virtual DPCD registers.
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Underflow occurs when running Netflix in a 4k144 eDP + 4k60 HDMI FRL
setup. It is caused by latency varying based on the DCFCLK/FCLK state.
[How]
Enable urgent latency adjustment and match the reference to existing
ASIC that also see increased latency at low FCLK.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix some problems reported by Coverity
- Fix idle optimization checks for multi-display and dual eDP
- Fix incorrect size calculation for loop
- Fix DSC-re-computing
- Add Replay capability and state in debugfs
- Refactor DCCG into component folder
- Refactor input mode programming for DIG FIFO
- Reset DSC clock in post unlock update
- Clean-up recout calculation for visual confirm
- Enable urgent latency adjustments for DCN35
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Implement command interface to query ABM SW algorithm and
HW caps. This is primarily intended as a debugging interface
- Add new definitions for max number of histogram bins and ABM
curve segments available in hardware
- Add structures to retrieve caps to describe ABM HW caps
since not all ASICs have the same number of cure segments and
bins
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Switching between DSC clock or disable DSC block are not double buffered update.
Corruption is observed if these updates happen before DSC double buffered
disconnection.
[how]
Move DSC disable and refclk reset to post unlock update. Wait for DSC double buffered
disconnection and all mpccs are disconnected before reset DSC clock.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 3351c608f3 ("drm/amd/display: Only program P-State force if pipe config changed")
Which causes regression.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some older MST hubs do not report DPCD registers according to
specification.
[How]
This change re-applies commit c536555451 ("drm/amd/display: dsc mst
re-compute pbn for changes on hub").
With an additional check for these older MST devices.
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Idle optimizations are blocked if there's more than one eDP connector
on the board - blocking S0i3 and IPS2 for static screen.
[How]
Fix the checks to correctly detect number of active eDP.
Also restrict the eDP support to panels that have correct feature
support.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Make enable and disable sequences symmetric.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
cleaning up the code refactor requires hubp to be in its own component.
[how]
move all files under newly created hubp folder and fixing the makefiles.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Bhuvana Chandra Pinninti <bhuvanachandra.pinninti@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Split into a separate adjust and calculate call so
we can let the caller adjust recout
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This fixes a bug introduced by commit c536555451 ("drm/amd/display: dsc
mst re-compute pbn for changes on hub").
The change caused light-up issues with a second display that required
DSC on some MST docks.
[How]
Use Virtual DPCD for DSC caps in MST case.
[Limitations]
This change only affects MST DSC devices that follow specifications
additional changes are required to check for old MST DSC devices such as
ones which do not check for Virtual DPCD registers.
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Underflow occurs when running Netflix in a 4k144 eDP + 4k60 HDMI FRL
setup. It is caused by latency varying based on the DCFCLK/FCLK state.
[How]
Enable urgent latency adjustment and match the reference to existing
ASIC that also see increased latency at low FCLK.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Input mode for the DIG FIFO should be programmed as part of stream
encoder setup.
[HOW]
Pre-calculate the pixels per cycle as part of the pixel clock params,
and program as part of stream encoder setup.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Providing a mechanism to manipulate the pwm frequency on the
individual GPUs and monitor the transition during the switch.
[How]
Added a variable in dc_debug_options data structure. Using
this variable to call the newly added command on the firmware.
Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Sreeja Golui <sreeja.golui@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
User can get the panel replay capability and state for debug.
sudo cat /sys/kernel/debug/dri/0/eDP-1/replay_capability
"Sink support: no" - if panel doesn't support Replay
"Sink support: yes" - if panel supports Replay
"Driver support: no\n" - if driver doesn't support Replay
"Driver support: yes\n" - if driver supports Replay
sudo cat /sys/kernel/debug/dri/0/eDP-1/replay_state
It will return current panel replay state
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why and how]
Current 420 ODM combine will override debug settings.
Add support if debug settings is set for 420 ODM combine.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Xi Liu <xi.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes 12 UNINIT issues reported by Coverity.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
The assignment of disp_cfg_index_max is missed and should be
assigned to __DML2_WRAPPER_MAX_STREAMS_PLANES__.
Fixes: 55ec7679e6 ("drm/amd/display: Limit array index according to architecture")
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Coverity reports OVERRUN warning. soc.num_states could
be 40. But array range of bw_params->clk_table.entries is 8.
[How]
Assert if soc.num_states greater than 8.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Make sure vmid0p72_idx, vnom0p8_idx and vmax0p9_idx calculation will
never overflow and exceess array size.
This fixes 3 OVERRUN and 1 INTEGER_OVERFLOW issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
dml_stream_idx will be -1 when it is not found. Check and skip in such a
case as -1 is not a valid array index.
This fixes a NEGATIVE_RETURNS issue reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dc_clk_table->entries has size of MAX_NUM_DPM_LVL(=8), but the loop
counter i can go up to DML_MAX_CLK_TABLE_SIZE(=20) - 1.
[How]
The loop should be min(DML_MAX_CLK_TABLE_SIZE, MAX_NUM_DPM_LVL) - 1
instead.
This fixes 21 OVERRUN issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For addtion (uint8_t) variable + constant 1,
coverity generates message below:
Truncation due to cast operation on "cur_idx + 1" from
32 to 8 bits.
Then Coverity assume result is 32 bits value be saved into
8 bits variable. When result is used as index to access
array, Coverity suspects index invalid.
[How]
Change varaible type to uint32_t.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
ctx->architecture determine array sizes of ODMMode and DPPPerSurface
arrays to __DML2_WRAPPER_MAX_STREAMS_PLANES__ or __DML_NUM_PLANES__,
and these array index should be checked before used
This fixes 2 OVERRUN issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
A read of acrtc_attach->base.state->event was not locked so moving it
inside the spinlock.
This fixes a LOCK_EVASION issue reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT & HOW]
Check clk table's array size to avoid out-of-bound memory accesses.
This fixes two OVERRUN issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Coverity reports RESOURCE_LEAK for some implemenations
of clock_source_create. Do not release memory of clk_src
if contructor fails.
[How]
Free clk_src if contructor fails.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Coverity reports OVERRUN warning for
CalculateSwathAndDETConfiguration_params->hw_debug5
= &s->dummy_boolean[2].
bool dummy_boolean[2] is defined within
struct dml2_core_calcs_mode_support_locals.
[How]
Change array size from 2 to 3.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Check return pointer of kzalloc before using it.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For subtraction, coverity reports integer overflow
warning message when variable type is uint32_t.
[How]
Change variable type to int32_t.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For substrcation, coverity reports integer overflow
warning message when variable type is uint32_t.
[How]
Change varaible type to int32_t.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
dc->links[] has max size of MAX_LINKS and NULL is return when trying to
access with out-of-bound index.
This fixes 3 OVERRUN and 1 RESOURCE_LEAK issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Coverity reports RESOURCE_LEAK warning. State memory
is not released if dm_create_color_properties fail.
[How]
Call kfree(state) before return.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
HDCP_MESSAGE_ID_INVALID (-1) is not a valid msg_id nor is it a valid
array index, and it needs checking before used.
This fixes 4 OVERRUN issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This prevents accessing to negative index of link_encoders array.
This fixes an OVERRUN issue reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
num_valid_sets needs to be checked to avoid a negative index when
accessing reader_wm_sets[num_valid_sets - 1].
This fixes an OVERRUN issue reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Coverity reports OVERRUN warning. Do not check if array
index valid.
[How]
Check msg_id valid and valid array index.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
aux_rd_interval has size of 7 and should be checked.
This fixes 3 OVERRUN and 1 INTEGER_OVERFLOW issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
fe_clk_en has size of 5 but sizeof(fe_clk_en) has byte size 20 which is
lager than the array size.
[HOW]
Divide byte size 20 by its element size.
This fixes 2 OVERRUN issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Coverity report OVERRUN warning. There are
only max_links elements within dc->links. link
count could up to AMDGPU_DM_MAX_DISPLAY_INDEX 31.
[How]
Make sure link count less than max_links.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Coverity reports OVERRUN issues within amdgpu_dm
interrupt registers. Do not check index value before
access array. Do not check NULL pointer.
[HOW]
Add index value check for array. Add check for
pointer from amdgpu_dm_irq_register_interrupt.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
GPIO_ID_UNKNOWN (-1) is not a valid value for array index and therefore
should be checked in advance.
This fixes 5 OVERRUN issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
tg_inst will be a negative if timing_generator_count equals 0, which
should be checked before used.
This fixes 2 OVERRUN issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
ENGINE_ID_UNKNOWN (-1) is not a valid eng_id and not a valid array
index.
[HOW]
Check whether eng_id is unknown to avoid access array with negative
array index.
This fixes 4 OVERRUN issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
cleaning up the code refactor requires dccg to be in its own component.
[how]
move all files under newly created dccg folder and fixing the
makefiles.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Revalla Hari Krishna <harikrishna.revalla@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why && How]
Copyright notice failed in the Palamida scan and make changes to
align with our guidelines.
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit removes an unnecessary NULL check in the
`dcn10_set_input_transfer_func` function in the `dcn10_hwseq.c` file.
The variable `tf` is assigned the address of
`plane_state->in_transfer_func` unconditionally, so it can never be
`NULL`. Therefore, the check `if (tf == NULL)` is unnecessary and has
been removed.
Fixes the below smatch warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn10/dcn10_hwseq.c:1839 dcn10_set_input_transfer_func() warn: address of 'plane_state->in_transfer_func' is non-NULL
Fixes: 285a7054bf ("drm/amd/display: Remove plane and stream pointers from dc scratch")
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit removes a redundant NULL check in the
`dce110_set_input_transfer_func` function in the `dce110_hwseq.c` file.
The variable `tf` is assigned the address of
`plane_state->in_transfer_func` unconditionally, so it can never be
`NULL`. Therefore, the check `if (tf == NULL)` is unnecessary and has
been removed.
Fixes the below smatch warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dce110/dce110_hwseq.c:301 dce110_set_input_transfer_func() warn: address of 'plane_state->in_transfer_func' is non-NULL
Fixes: 285a7054bf ("drm/amd/display: Remove plane and stream pointers from dc scratch")
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These lines are indented too far. Clean the whitespace.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are various spelling mistakes in dml2_printf messages, fix them.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When building with clang 19 or newer (which strengthened some of the
enum conversion warnings for C), there is a warning (or error with
CONFIG_WERROR=y) around doing arithmetic with an enumerated type and a
floating point expression.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_dpmm/dml2_dpmm_dcn4.c:181:58: error: arithmetic between enumeration type 'enum dentist_divider_range' and floating-point type 'double' [-Werror,-Wenum-float-conversion]
181 | divider = (unsigned int)(DFS_DIVIDER_RANGE_SCALE_FACTOR * (vco_freq_khz / clock_khz));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
This conversion is expected due to the nature of the enumerated value
and definition, so silence the warning by casting the enumeration to an
integer explicitly to make it clear to the compiler.
Fixes: 70839da636 ("drm/amd/display: Add new DCN401 sources")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Panel replay was enabled by default in commit 5950efe25e
("drm/amd/display: Enable Panel Replay for static screen use case"), but
it isn't working properly at least on some BOE and AUO panels. Instead
of being static the screen is solid black when active. As it's a new
feature that was just introduced that regressed VRR disable it for now
so that problem can be properly root caused.
Cc: Tom Chung <chiahsuan.chung@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3344
Fixes: 5950efe25e ("drm/amd/display: Enable Panel Replay for static screen use case")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Panel replay was enabled by default in commit 5950efe25e
("drm/amd/display: Enable Panel Replay for static screen use case"), but
it isn't working properly at least on some BOE and AUO panels. Instead
of being static the screen is solid black when active. As it's a new
feature that was just introduced that regressed VRR disable it for now
so that problem can be properly root caused.
Cc: Tom Chung <chiahsuan.chung@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3344
Fixes: 5950efe25e ("drm/amd/display: Enable Panel Replay for static screen use case")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
preOS will not support display mode programming and link training
for UHBR rates.
[how]
If we detect a sink that's UHBR capable, disable seamless boot
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why && How]
Screen flickering saw on 4K@60 eDP with high refresh rate external
monitor when booting up in DC mode. DC Mode Capping is disabled
which caused wrong UCLK being used.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add VCO speed parameters in the bounding box array.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During DP tunnel creation, CM preallocates BW and reduces
estimated BW of other DPIA. CM release preallocation only
when allocation is complete. Display mode validation logic
validates timings based on bw available per host router.
In multi display setup, this causes bw allocation failure
when allocation greater than estimated bw.
[How]
Do zero alloc to make the CM to release preallocation and
update estimated BW correctly for all DPIAs per host router.
Reviewed-by: PeiChen Huang <peichen.huang@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] DSC debugfs, such as dp_dsc_clock_en_read,
use aconnector->dc_link to find pipe_ctx for display.
Displays connected to MST hub share the same dc_link.
DSC instance is from pipe_ctx. This causes incorrect
DSC instance for display connected to MST hub.
[How] Add aconnector->sink check to find pipe_ctx.
CC: stable@vger.kernel.org
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New request from KMD/VBIOS in order to support new UMA carveout
model. This fixes a null dereference from accessing
Ctx->dc_bios->integrated_info while it was NULL.
DAL parses through the BIOS and extracts the necessary
integrated_info but was missing a case for the new BIOS
version 2.3.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Currently DCN315 clk manager is missing code to enable/disable dtbclk.
Because of this, "optimized_required" flag is constantly set
and this prevents FreeSync from engaging for certain high bandwidth
display Modes which require DTBCLK.
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Swapnil Patel <swapnil.patel@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the DCN20 resource initialization, ensure that DMCUB support starts
configured as true.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Theoretically rare corner case where ceil(Y) results in rounding up to
an integer. If this happens, the 1 should be carried over to the X
value.
CC: stable@vger.kernel.org
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This 8.4 inch panel is integrated in the Ayaneo Kun handheld
device. The panel resolution is 2560×1600, i.e. it has
portrait dimensions.
Decoding the EDID shows:
Manufacturer: MSF
Model: 4099
Display Product Name: 'TV080WUM-NL0 '
Judging from the product name this might be a clone of a
BOE panel, but with larger dimensions.
Panel frequently shows non-functional backlight control. Adding
some debug prints to update_connector_ext_caps() shows that
something the OLED bit of ext_caps is set, and then the driver
assumes that backlight is controlled via AUX.
Forcing backlight control to PWM via amdgpu.backlight=0 restores
backlight operation.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
./drivers/gpu/drm/amd/display/dc/clk_mgr/dcn401/dcn401_clk_mgr.c: dcn401/dcn401_clk_mgr.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8885
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
./drivers/gpu/drm/amd/display/dc/inc/hw/transform.h: spl/dc_spl_types.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8884
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Smatch complains because some lines are indented more than they should
be. I went a bit crazy re-indenting this. ;)
The comments were not useful except as a marker of things which are left
to implement so I deleted most of them except for the TODO.
I introduced a "data" pointer so that I could replace
"scl_data->dscl_prog_data." with just "data->" and shorten the lines a
bit. It's more readable without the line breaks.
I also tried to align it so you can see what is changing on each line.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Disable seamless boot on 128b/132b encoding
- Have cursor and surface updates together
- Change ASSR disable sequence to avoid corruption
- Fix few IPS problems
- Enable Replay for DCN315
- Fix few ODM problems
- Fix FEC_READY write timing
- Fix few FPO problems
- Adjust DML21 gpuvm_enable assignment
- Fix divide by 0 error in VM environment
- Fix few DCN35 problems
- Fix flickering on DCN321
- Fix mst resume problem
- Fix multi-disp FAMS problem
- Refactor Replay
- Update some of the dcn303 parameters
- Enable legacy fast update for dcn301
- Add VCO parameter for DCN31 FPU
- Fix problems reported by Coverity
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
preOS will not support display mode programming and link training
for UHBR rates.
[how]
If we detect a sink that's UHBR capable, disable seamless boot
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently disabling ASSR before stream is disabled causes visible
display corruption.
[How]
Move disable ASSR command to after stream has been disabled.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Swapnil Patel <swapnil.patel@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
HPD interrupt cannot be handled in IPS2 state.
So if there's a display topology change while system in IPS2
it can be missed.
[How]
Implement worker to check each 5 sec in IPS for HPD.
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We can hang in IPS2 checking DMCUB_SCRATCH0 for link detection state.
[How]
Replace the HW access with a check on the shared state bit. This will
work the same way as the SCRATCH0 but won't require a wake in the case
where link detection isn't required.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Enable Replay for DCN315.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Joan Lee <joan.lee@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When optc uses two pixel per container, each ODM slice width must be an
even number.
[how]
If ODM slice width is odd number increase it by 1.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
We can miss writing FEC_READY in some cases before LT start, which
violates DP spec. Remove the condition guarding the DPCD write so that
the write happens unconditionally.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
For FPO + Vactive scenarios we must check that all non-FPO pipes
have VACTIVE margin to allow it. The previous check only confirmed
that there is at least one pipe that has vactive margin, but this
is incorrect as the vactive display could be using two pipes (MPO)
where the desktop plane has vactive margin, and the video plane
does not.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Currently in DML2.1 gpuvm_enable was hardcoded.
Use passed info from DC for DML21 to be in sync with
what is used in DC.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nevenko Stupar <nevenko.stupar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Assign linear_pitch_alignment so we don't cause a divide by 0
error in VM environments
Reviewed-by: Sohaib Nadeem <sohaib.nadeem@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
cleaning up the code refactor requires hubbub to be in its own component.
[how]
Move all files under newly created hubbub folder and fix the makefiles.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Revalla Hari Krishna <harikrishna.revalla@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Today for MED update type we do not call update clocks. However, for FPO
the assumption is that update clocks should be called to disable P-State
switch before any HW programming since FPO in FW and driver are not
synchronized. This causes an issue where on a MED update, an FPO P-State
switch could be taking place, then driver forces P-State disallow in the below
code and prevents FPO from completing the sequence. In this case we add a check
to avoid re-programming (and thus re-setting) the P-State force register by
only reprogramming if the pipe was not previously Subvp or FPO. The assumption
is that the P-State force register should be programmed correctly the first
time SubVP / FPO was enabled, so there's no need to update / reset it if the
pipe config has never exited SubVP / FPO.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 4d4d3ff16d ("drm/amd/display: Keep VBios pixel rate div
setting util next mode set") which causes issue.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Webb Chen <yi-lchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Enable root clock optimization for PHYSYMCLK and only
disable it when it's actively being used
v2: Fix array-index-out-of-bounds in dcn35_calc_blocks_to_gate
Reviewed-by: Roman Li <roman.li@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
FIFO error can occur if we don't trigger a DISPCLK change after
touching K1/K2 dividers. For 4k144 eDP + hotplug of USB-C DP display
we see FIFO underflow.
[How]
We have the path to trigger the resync as the workaround in
DCN314/DCN32, it just needs to be ported over to DCN35.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
IPS stability was fixed in bios.
[How]
Set disable_ips init flag to DMUB_IPS_ENABLE.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
DSC slice must be divisible by ODM slice count.
[how]
If DSC slice count is not a multiple of ODM slice count, increase DSC
slice until it is. Otherwise fail to compute DSC configuration.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why && How]
Screen flickering saw on 4K@60 eDP with high refresh rate external
monitor when booting up in DC mode. DC Mode Capping is disabled
which caused wrong UCLK being used.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Like commit ec5fa9fcde ("drm/amd/display: Adjust the MST resume flow"), we
want to avoid handling mst topology changes before restoring the old state.
If we enable DP_UP_REQ_EN before calling drm_atomic_helper_resume(), have
changce to handle CSN event first and fire hotplug event before restoring the
cached state.
[How]
Disable mst branch sending up request event before we restoring the cached state.
DP_UP_REQ_EN will be set later when we call drm_dp_mst_topology_mgr_resume().
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[HOW&WHY]
In multi-monitor cases the VBLANK stretch that is required to align both
monitors may be so large that it may create issues for gaming performance.
Use debug value to restrict in-game FAMS support for multi-disp use case.
Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Iswara Nagulendran <iswara.nagulendran@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
To refine for link off frame count in diagnose tool,
the driver show the link off frame count number instead of showing link
off frame count level.
Reviewed-by: ChunTao Tso <chuntao.tso@amd.com>
Reviewed-by: Robin Chen <robin.chen@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dennis Chan <dennis.chan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add code to handle case when quad_part is 0 in gpu_addr_to_uma().
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set up to enable log color state for multiple DCNs.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit just remove some trivial legacy code in some of the DC
files.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adjust to update some of the dcn303 parameters.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set up to enable legacy fast update.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add dcn301_fpu prefix to some of the FPU function with the required
adjustments.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add VCO speed parameters in the bounding box array.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
We accidentally upstream unnecessary files. Remove them.
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit just update the code style in two if conditions and in an
static array.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit add PP_SMU_VER_VG to the pp_smu_ver list.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add REG_SEQ_SUBMIT and REG_SEQ_WAIT_DONE to optimize the burst write for
the regama lut.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some IGT tests fail with the new atomic cursor updates
when running on older DCE-based ASICs. To work around
these issues keep calling the amdgpu_dm_commit_cursors
for each cursor update on DCE, even if those cursor
updates coincide with other plane updates.
Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cursors are always programmed independently of updates on other
planes. When atomic commits program cursor and surface updates
together the cursor update might be locked out by the surface
update and not take effect.
To combat this program cursor and surface updates together via
dc_update_planes_and_stream to ensure they can be applied
atomically.
When cursor updates come on their own use the old method
to program the cursor as dc_update_planes_and_stream isn't
handling this case correctly (yet), leading to a flickering
screen.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2186
Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Adjust the dmub_fw_boot_options reserved bits to be correct
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The string dp_hdmi_dongle_signature_str already uses u8 but the string
dp_hdmi_dongle_signature_str does not. Just replace uint8_t with u8 for
dp_hdmi_dongle_signature_str.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
There are potential issues with Z8 and IPS
that need to be addressed and need to add
in missing function pointers.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
VBios & Driver may have differnet pixel rate div policy.
If the policy is not same and fast boot is enabled,
it would cause the pixel rate is too high
after driver only performs stream blank & unblank.
[how]
We would keep pixel rate div setting by VBios until next mode set.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Webb Chen <yi-lchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Error correction was enabled in a monitor which doesn't support.
[How]
Disable error correction if it's not supported
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Cruise <cruise.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
The recout x offset was incorrect which led to
wrong viewport calculation. For stereo
side-by-side case, the slice index should be
0 for both split pipes.
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
HWSS set_cursor_attributes copies the stream's cursor attributes
to the hubp cursor attributes. set_cursor_position might attempt
to program the cursor attributes but will program them wrong if
they're not set correctly. We need to call HWSS set_cursor_attributes
first to ensure hubp has the right attributes to be programmed.
Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We're seeing issues when user-space tries to do an atomic update of
the primary surface, as well as the cursor. These two updates are
separate calls into DC and don't currently act as an atomic update.
This might lead to cursor updates being locked out and cursors
stuttering.
In order to solve this problem we want to separate the setting
and programming of cursor attributes and position. That's what
we're doing in this patch. The subsequent patch will then be
able to use the cursor setters in independent cursor updates,
as well as in atomic commits.
Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 0a571e8657.
[Why]
The change being reverted incorrectly assumes that a pointer type was
intended, however copying to a new structure is correct. As well, there
is no compiler error, it was instead an error in the testing framework
being used.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not every ASIC implements dp_set_dsc_config. Add condition to prevent
calls to unimplemented function.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During DP tunnel creation, CM preallocates BW and reduces
estimated BW of other DPIA. CM release preallocation only
when allocation is complete. Display mode validation logic
validates timings based on bw available per host router.
In multi display setup, this causes bw allocation failure
when allocation greater than estimated bw.
[How]
Do zero alloc to make the CM to release preallocation and
update estimated BW correctly for all DPIAs per host router.
Reviewed-by: PeiChen Huang <peichen.huang@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] DSC debugfs, such as dp_dsc_clock_en_read,
use aconnector->dc_link to find pipe_ctx for display.
Displays connected to MST hub share the same dc_link.
DSC instance is from pipe_ctx. This causes incorrect
DSC instance for display connected to MST hub.
[How] Add aconnector->sink check to find pipe_ctx.
CC: stable@vger.kernel.org
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
It's possible that the write hasn't fully completed by the time we
send (and flush) a command to DMCUB to notify idle to request IPS2
exit.
[How]
Perform a readback of the volatile structure into dc_dmub_srv state.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Block FPO if the max stretch refresh rate is low enough
to cause a flicker by storing the maximum safe refresh
decrease from nominal in stream.
- Brought over various Freesync Luminance functions to dc. Use these
new functions to block fpo if we will flicker.
- Generalized increase/reduce dependent functions to reduce code clutter
and allow for easier use.
- Added a debug option to enable the feature. Disabled by default.
Co-authored-by: Ethan Bitnun <etbitnun@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ethan Bitnun <etbitnun@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Upon disconnecting a UHBR SST display, the disconnection and the
SetTimings to disable the display can occur such that link_set_dpms_off
occurs after the disconnection has already processed
(link->type is dc_connection_none). Thus, the AUX related
operations should be skipped when clearing the payload allocation table.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New request from KMD/VBIOS in order to support new UMA carveout
model. This fixes a null dereference from accessing
Ctx->dc_bios->integrated_info while it was NULL.
DAL parses through the BIOS and extracts the necessary
integrated_info but was missing a case for the new BIOS
version 2.3.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Avoid race condition which puts LTTPR into bad state during UHBR LT.
[HOW]
Delay 30ms between starting UHBR TPS1 PHY output and sending TPS1 via DPCD.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
TCON data is corrupted after electro static discharge test.
Once the TCON data get corrupted, they will get themselves
reset and send HPD_IRQ to source side.
[How]
Support HPD_IRQ for internal link, and restore the PSR/Replay setup.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Sung-huai Wang <danny.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Need to update the function pointers that
perform the power up and down sequence
to reuse the modified sequence as a requirement.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Currently DCN315 clk manager is missing code to enable/disable dtbclk.
Because of this, "optimized_required" flag is constantly set
and this prevents FreeSync from engaging for certain high bandwidth
display Modes which require DTBCLK.
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Swapnil Patel <swapnil.patel@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When switching from "Extend" to "Second Display Only" we sometimes
call resource_get_otg_master_for_stream on a stream for the eDP,
which is disconnected. This leads to a null pointer dereference.
[HOW]
Added a null check in dc_resource.c/resource_log_pipe_topology_update.
CC: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Natanel Roizenman <natanel.roizenman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When PHY power off, the DP_SEC_CNTL cannot be configured and cause
disable Adaptive sync SDP failed. Regarding the issue, the driver will
disabled AS-SDP in replay state machine.
Reviewed-by: ChunTao Tso <chuntao.tso@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Dennis Chan <dennis.chan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop unnecessary semicolon that can create a problem of double semicolon
in some compilers.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the DCN20 resource initialization, ensure that DMCUB support starts
configured as true.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds, updates, and removes some of the comments used in the
DC code.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-Wframe-larger-than=2048 is a part of both CFLAGS and CFLAGS_REMOVE for
dml2_core_dcn4_calcs.o, which means that it ultimately gets removed
altogether for 64-bit targets, as 2048 is the default FRAME_WARN value
for 64-bit platforms, resulting in no -Wframe-larger-than coverage for
this file.
Remove -Wframe-larger-than from CFLAGS_REMOVE_dml2_core_dcn4_calcs.o and
move to $(frame_warn_flag) for CFLAGS_dml2_core_dcn4_calcs.o, as that
accounts for the fact that -Wframe-larger-than may need to be larger
than 2048 in certain situations, such as when the sanitizers are
enabled.
Fixes: 00c391102a ("drm/amd/display: Add misc DC changes for DCN401")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When building with tip of tree Clang, there are some new instances of
-Wframe-larger-than from the new display code (which become fatal with
CONFIG_WERROR=y):
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_shared.c:754:6: error: stack frame size (2488) exceeds limit (2048) in 'dml2_core_shared_mode_support' [-Werror,-Wframe-larger-than]
754 | bool dml2_core_shared_mode_support(struct dml2_core_calcs_mode_support_ex *in_out_params)
| ^
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_shared.c:9834:6: error: stack frame size (2152) exceeds limit (2048) in 'dml2_core_shared_mode_programming' [-Werror,-Wframe-larger-than]
9834 | bool dml2_core_shared_mode_programming(struct dml2_core_calcs_mode_programming_ex *in_out_params)
| ^
2 errors generated.
These warnings do not occur when CONFIG_K{A,C,M}SAN are disabled, so add
$(frame_warn_flag) to dml2_core_shared.o's CFLAGS, which was added in
commit 6740ec97bc ("drm/amd/display: Increase frame warning limit with
KASAN or KCSAN in dml2") to account for this situation.
Fixes: 00c391102a ("drm/amd/display: Add misc DC changes for DCN401")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit fixes the kdoc for 'Enable CRTC' in `optc401_enable_crtc`
function.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/optc/dcn401/dcn401_optc.c:177: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Enable CRTC
Fixes: 70839da636 ("drm/amd/display: Add new DCN401 sources")
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expose linear modifier definitions for use with DCN401
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove a duplicate definition of an SPL related enum transform.h
Since its used in SPL, it has been moved to its own header.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add some missing HDCP registers to be used in DCN35.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit address some small code style issues in DC.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit reorganizes the order in which some control registers are
presented to make it easier to identify the operations based on the
hardware doc.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit removes some unnecessary code and makes the required
adjustments to replace other parts of the code with a short option.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes 29 UNINIT issues reported by Coverity.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes 49 UNINIT issues reported by Coverity.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes 11 UNINIT issues reported by Coverity.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes 1 PW.INCLUDE_RECURSION reported by Coverity.
"./drivers/gpu/drm/amd/amdgpu/../display/dc/dc_types.h"
includes itself: dc_types.h -> dal_types.h -> dc_types.h
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
find_disp_cfg_idx_by_plane_id and find_disp_cfg_idx_by_stream_id returns
an array index and they return -1 when not found; however, -1 is not a
valid index number.
[HOW]
When this happens, call ASSERT(), and return a positive number (which is
fewer than callers' array size) instead.
This fixes 4 OVERRUN and 2 NEGATIVE_RETURNS issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
resource_stream_to_stream_idx returns an array index and it return -1
when not found; however, -1 is not a valid array index number.
[HOW]
When this happens, call ASSERT(), and return a zero instead.
This fixes an OVERRUN and an NEGATIVE_RETURNS issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
&mode_lib->mp.Watermark and &locals->Watermark are
the same address. memcpy may lead to unexpected behavior.
[HOW]
memmove should be used.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
ENGINE_ID_UNKNOWN = -1 and can not be used as an array index. Plus, it
also means it is uninitialized and does not need free audio.
[HOW]
Skip and return NULL.
This fixes 2 OVERRUN issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pipe_ctx has a size of MAX_PIPES so checking its index before accessing
the array.
This fixes an OVERRUN issue reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
msg_id is used as an array index and it cannot be a negative value, and
therefore cannot be equal to MOD_HDCP_MESSAGE_ID_INVALID (-1).
[HOW]
Check whether msg_id is valid before reading and setting.
This fixes 4 OVERRUN issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Check return pointer of kzalloc before using it.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Theoretically rare corner case where ceil(Y) results in rounding up to
an integer. If this happens, the 1 should be carried over to the X
value.
CC: stable@vger.kernel.org
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Headless dp 2.0 will take longer to update.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit add some missing HDMI control registers to DCN3x.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add TMDS balancer control to the list of available encoder registers for
DCN 30.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit removes an unnecessary NULL check in the
`dcn20_set_input_transfer_func` function in the `dcn20_hwseq.c` file.
The variable `tf` is assigned the address of
`plane_state->in_transfer_func` unconditionally, so it can never be
`NULL`. Therefore, the check `if (tf == NULL)` is unnecessary and has
been removed.
The plane_state->in_transfer_func itself cannot be NULL because it's a
structure, not a pointer. When we do tf =
&plane_state->in_transfer_func;, we're getting the address of that
structure, which will always be valid as long as plane_state itself is
not NULL.
we've already checked if plane_state is NULL with the line if (dpp_base
== NULL || plane_state == NULL) return false;. So, if the code execution
gets to the point where tf = &plane_state->in_transfer_func; is called,
plane_state is guaranteed to be not NULL, and therefore tf will also not
be NULL.
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn20/dcn20_hwseq.c
1094 bool dcn20_set_input_transfer_func(struct dc *dc,
1095 struct pipe_ctx *pipe_ctx,
1096 const struct dc_plane_state *plane_state)
1097 {
1098 struct dce_hwseq *hws = dc->hwseq;
1099 struct dpp *dpp_base = pipe_ctx->plane_res.dpp;
1100 const struct dc_transfer_func *tf = NULL;
^^^^^^^^^ This assignment is not necessary now.
1101 bool result = true;
1102 bool use_degamma_ram = false;
1103
1104 if (dpp_base == NULL || plane_state == NULL)
1105 return false;
1106
1107 hws->funcs.set_shaper_3dlut(pipe_ctx, plane_state);
1108 hws->funcs.set_blend_lut(pipe_ctx, plane_state);
1109
1110 tf = &plane_state->in_transfer_func;
^^^^^
Before there was an if statement but now tf is assigned unconditionally
1111
--> 1112 if (tf == NULL) {
^^^^^^^^^^^^^^^^^
so these conditions are impossible.
1113 dpp_base->funcs->dpp_set_degamma(dpp_base,
1114 IPP_DEGAMMA_MODE_BYPASS);
1115 return true;
1116 }
1117
1118 if (tf->type == TF_TYPE_HWPWL || tf->type == TF_TYPE_DISTRIBUTED_POINTS)
1119 use_degamma_ram = true;
1120
1121 if (use_degamma_ram == true) {
1122 if (tf->type == TF_TYPE_HWPWL)
1123 dpp_base->funcs->dpp_program_degamma_pwl(dpp_base,
Fixes the below Smatch static checker warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn20/dcn20_hwseq.c:1112 dcn20_set_input_transfer_func() warn: address of 'plane_state->in_transfer_func' is non-NULL
Fixes: 285a7054bf ("drm/amd/display: Remove plane and stream pointers from dc scratch")
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCN3.0 supports some specific DWB debug registers that are not exposed
yet. This commit just adds the missing registers.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
According to [1]:
```
DTN only logs 'pipe_count' instances of MPCC. However in some cases
there are different number of MPCC than DPP (pipe_count).
```
As DTN log still relies on pipe_count to print mpcc state, switch to
mpcc_count in all occurrences.
[1] https://lore.kernel.org/amd-gfx/20240328195047.2843715-39-Roman.Li@amd.com/
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the header file dc/dcn301/dcn301_dccg.h, the function dccg301_create
is declared twice, so remove duplication.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: David Tadokoro <davidbtadokoro@usp.br>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When slice_height is 0, the division by slice_height in the calculation
of the number of slices will cause a division by zero driver crash. This
leaves the kernel in a state that requires a reboot. This patch adds a
check to avoid the division by zero.
The stack trace below is for the 6.8.4 Kernel. I reproduced the issue on
a Z16 Gen 2 Lenovo Thinkpad with a Apple Studio Display monitor
connected via Thunderbolt. The amdgpu driver crashed with this exception
when I rebooted the system with the monitor connected.
kernel: ? die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434 arch/x86/kernel/dumpstack.c:447)
kernel: ? do_trap (arch/x86/kernel/traps.c:113 arch/x86/kernel/traps.c:154)
kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu
kernel: ? do_error_trap (./arch/x86/include/asm/traps.h:58 arch/x86/kernel/traps.c:175)
kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu
kernel: ? exc_divide_error (arch/x86/kernel/traps.c:194 (discriminator 2))
kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu
kernel: ? asm_exc_divide_error (./arch/x86/include/asm/idtentry.h:548)
kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu
kernel: dc_dsc_compute_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1109) amdgpu
After applying this patch, the driver no longer crashes when the monitor
is connected and the system is rebooted. I believe this is the same
issue reported for 3113.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Jose Fernandez <josef@netflix.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3113
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit add some missing debug registers for DPCS and RDPC debug.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the protoype for print ip state to be used
to print the registers in devcoredump during
a gpu reset.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the prototype to dump ip registers
for all ips of different asics and set
them to NULL for now. Based on the
requirement add a function pointer for
each of them.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit d76c0a23b5.
This change must be reverted since it caused soft hangs when changing
the refresh rate to 122 & 144Hz when using a 7000 series GPU.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: Mark Broadworth <Mark.Broadworth@amd.com>
Cc: Daniel Wheeler <daniel.wheeler@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise we can end up with a frame on unsuspend where color management
is not applied when userspace has not committed themselves.
Fixes re-applying color management on Steam Deck/Gamescope on S3 resume.
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
./drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c: dcn32/dcn32_clk_mgr.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8789
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise we can end up with a frame on unsuspend where color management
is not applied when userspace has not committed themselves.
Fixes re-applying color management on Steam Deck/Gamescope on S3 resume.
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit b5abd7f983.
This change breaks DSC on 4k monitors at 144Hz over USB-C.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3254
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Muhammad Ahmed <ahmed.ahmed@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Charlene Liu <charlene.liu@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: stable@vger.kernel.org
This reverts commit 002001b092.
The original patch introduces cursor gamma issue to multiple
Linux compositors. For this reason this commit reverts this change.
Cc: Melissa Wen <mwen@igalia.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
* Expand dmub_cmd operations.
* Update DVI configuration.
* Modify power sequence.
* Enable Z10 flag for IPS.
* Multiple code cleanups.
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add some missing registers expansion in the dcn201_link_encoder file.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fill ring buffer before offload.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit remove some unused code and also rename one of the define.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] Update FMT_CONTROL settings based on HW spec
[How] Update FMT settings for 4:2:0
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit groups many parts of the code that are redundant or not used
and drops all of them.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit updates some comments to be more precise and adds another
small comment to some other parts to improve the code readability.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the scl_data.format to be close to other similar parts.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Driver was passing a wrong command version which to DMCUB which caused
the DMCUB to treat it as 0, so it wouldn't support dual eDP and would
override the panel index to 0 instead of choosing between 0/1.
[how]
Use DMUB_CMD_PSR_CONTROL_VERSION_1 instead of PSR_VERSION_1.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The previous assumption that there will be an optimize_bandwidth call
following every prepare_bandwidth call was incorrect and caused small
inaccuracies in logging, as some info was only updated in later prepare
calls.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Ethan Bitnun <Ethan.Bitnun@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update headers by removing two unecessary headers and include a new one.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The chip ID DEVICE_ID_NV_13FE is not meaningful and represents a legacy
way of dealing with chip ID. This commit uses dc_version instead of
chip_id and also DCN_VERSION_2_01 instead of DEVICE_ID_NV_13FE.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit b5abd7f983.
This change breaks DSC on 4k monitors at 144Hz over USB-C.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3254
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Muhammad Ahmed <ahmed.ahmed@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Charlene Liu <charlene.liu@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Update dmub_cmd to manipulate SDP control in replay FSM, add command
for panel_cntl, expand link rate enum, and increase the reserve byte.
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rework part of the modifications made to the power sequence and resource
allocation logic.
Reviewed-by: Xi (Alex) Liu <xi.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
IPS FSM requires Z10 flag to be enabled to do save and restore the
registers properly.
[how]
Enable Z10 and use the correct function to determine Z10 capability
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Pointer initialization and assignment for dml2_options is not done
correctly. While this works for some compilers, others give an error.
[How]
Modify dc_state_create code to correctly initialize the dml2_opt pointer
and pass it to dml2_create. Also update the code with correct derefrence
operations.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
IPS ono sequence ordering differs based on the ASIC.
[How]
Detect the ASIC ID revision and set the boot option accordingly. Feed
it through the DCN35 DMUB functions.
Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Adding support for chroma subsampling offset (cositing) in scaler
calculations to adjust reference point where we determine post-scaling
chroma value in YUV420 surfaces.
[How]
Add support for cositing options: NONE, LEFT and TOPLEFT Add debug
option force_cositing and set default to TOPLEFT to maintain same
behaviour as without offset support.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Limit the code change for ips enable to reduce the impact for now. Also
exit_ips first before dc_power_down to avoid 0x9f.
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To reduce the complexity of pipe resource allocation for different
use-cases, now we search for any free pipe sequentially rather than from
bottom up.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DVI is TMDS signal like HDMI but without audio. Current signal check
does not correctly reflect DVI clock programming.
[How]
Define a new signal check for TMDS that includes DVI to HDMI TMDS
programming.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to update the power sequence to help prevent potential issues
like multi-display or multi-plane.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit makes some small adjustments in the dwb header.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set OTG/OPTC parameters to 0 if something goes wrong on DCN10.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set OTG/OPTC parameter to 0 if failed to set DRR.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update DCN10 to use legacy fast update and ensure that the MPCC count is
the same as the pipe_count.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DCN 1.0 is not ready for the P010 support.
[HOW]
1. Set the P010 plan_cap of DCN 1.0 to be false.
2. Let the DM do the plan cap initialization of DCN 1.0.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Figo Wang <shen-hong.wang@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some of the resource capabilities for DCN201 and the debug default
option are outdated. This commit just set some of the missing
configurations for DCN201.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit removes code that are not used by display anymore.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some of the includes used in the DC can be removed and others need to be
update. This commit adjusts some of those headers in the display code.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit just introduce some basic comments that helps to understand
the overall behavior of some structs.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
OLED panels show no display for large vtotal timings.
[How]
Check if ss is enabled and read from lut for spread spectrum percentage.
Adjust dprefclk as required. DP_DTO adjustment is for edp only.
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Zhongwei <zhongwei.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The previous check for the is_vsc_sdp_colorimetry_supported flag
for MST sink signals did nothing. Simplify the code and use the
same check for MST and SST.
Cc: stable@vger.kernel.org
Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In order for display colorimetry to work correctly on DP displays
we need to send the VSC SDP packet. We should only do so for
panels with DPCD revision greater or equal to 1.4 as older
receivers might have problems with it.
Cc: stable@vger.kernel.org
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Xaver Hugl <xaver.hugl@gmail.com>
Cc: Melissa Wen <mwen@igalia.com>
Cc: Agustin Gutierrez <Agustin.Gutierrez@amd.com>
Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Wrong logic cause screen corruption.
[How]
Port logic from DCN35/314.
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Fudongwang <fudong.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
We should not be recursively calling the manual trigger programming function when
FAMS is not in use.
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In current implemenation ODM mode is only reset when the last plane is
removed from dc state. For any dc validate we will always remove all
current planes and add new planes. However when switching from no planes
to 1 plane, ODM mode is not reset because no planes get removed. This
has caused an issue where we kept ODM combine when it should have been
remove when a plane is added. The change is to reset ODM mode when
adding the first plane.
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mode_config's max width x height is 4096x2160 and is higher than DWB's
max resolution 3840x2160 which is returned instead.
Cc: stable@vger.kernel.org
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
dynamic memory safety error detector (KASAN) catches and generates error
messages "BUG: KASAN: slab-out-of-bounds" as writeback connector does not
support certain features which are not initialized.
[HOW]
Skip them when connector type is DRM_MODE_CONNECTOR_WRITEBACK.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3199
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a new DCN veriosn 3.5.1 need to load
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the dram_clock_change_latency_us in dcn3_51_soc is initialized twice, so
delete one of them.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Xiang Yang <xiangyang3@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCN10 OPTC is used by other DCNs, and in some cases it might be useful
to have V_TOTAL_REGS available. This commit add V_TOTAL_REGS as part of
the TG field.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add boot option to change the ONO powerup flow, impacting
the order of power domains to power up or down first
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit b72a7e0fd0.
It causes a dead loop in dml_prefetch_check.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Qili Lu <qili.lu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For video mode test pattern (i.e. test pattern disable), the call to
rebuild test pattern params for the pipe is skipped. This causes
dynamic disablement of test pattern to not work, as the
test_pattern_params of the pipe will not be updated and retain the
values of the previously enabled test pattern.
[How]
Rebuild test pattern params even when test pattern is video mode,
allowing the pipe to have updated test_pattern_params values.
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
OLED panels show no display for large vtotal timings.
[How]
Check if ss is enabled and read from lut for spread spectrum percentage.
Adjust dprefclk as required. DP_DTO adjustment is for edp only.
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Zhongwei <zhongwei.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The previous check for the is_vsc_sdp_colorimetry_supported flag
for MST sink signals did nothing. Simplify the code and use the
same check for MST and SST.
Cc: stable@vger.kernel.org
Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In order for display colorimetry to work correctly on DP displays
we need to send the VSC SDP packet. We should only do so for
panels with DPCD revision greater or equal to 1.4 as older
receivers might have problems with it.
Cc: stable@vger.kernel.org
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Xaver Hugl <xaver.hugl@gmail.com>
Cc: Melissa Wen <mwen@igalia.com>
Cc: Agustin Gutierrez <Agustin.Gutierrez@amd.com>
Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
dwb was not POR previosly.
now need to enable dwb in dml2.
Limitation:
HW DML assumes only one DWB
one set of watermark for all 4 watermark sets
one stream has one DWB only.
WB scaling dml input has one set of scaling tap.
(no chroma so far)
needs to follow up
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
why and how:
as part of cleanup, need to refactor vpg. It was improperly referenced
as a dcn specfic part of link. the dcn agnostic code needed was ripped out
and put into vpg.h, now in dc/inc/hw.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Parandhaman K <parandhaman.k@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
6.75 Gbps link rate training for DP_TEST_LINK_RATE_RATE_8
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Allen Pan <allen.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Wrong logic cause screen corruption.
[How]
Port logic from DCN35/314.
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Fudongwang <fudong.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
We should not be recursively calling the manual trigger programming function when
FAMS is not in use.
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Changes to support future versions of FAMS.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When Subvp pipe's index is smaller than main pipe's index, the main
pipe's ODM policy is not yet assigned. If we assign subvp pipe's ODM
policy based on main pipe, we will assign uninitialized ODM policy.
[how]
Instead of copying main pipe's policy we copy the main pipe ODM policy
logic. So it doesn't matter whether if main pipe's ODM policy is set,
phantom pipe will always have the same policy because it running the
same calcualtion to derive ODM policy.
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In current implemenation ODM mode is only reset when the last plane is
removed from dc state. For any dc validate we will always remove all
current planes and add new planes. However when switching from no planes
to 1 plane, ODM mode is not reset because no planes get removed. This
has caused an issue where we kept ODM combine when it should have been
remove when a plane is added. The change is to reset ODM mode when
adding the first plane.
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mode_config's max width x height is 4096x2160 and is higher than DWB's
max resolution 3840x2160 which is returned instead.
Cc: stable@vger.kernel.org
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want flexibility to choose how pwrseq instance is mapped to eDP panel
[How]
Add configuration option to choose the pwrseq mapping policy.
When enabled, allow fixed mapping between DIG inst to pwrseq inst.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Lewis Huang <lewis.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit removes the lines that describe the 'streams'
and 'stream_count' parameters and adds a line to describe the 'params'
parameter, which was missing from the original comment block.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2138: warning: Function parameter or member 'params' not described in 'dc_commit_streams'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2138: warning: Excess function parameter 'streams' description in 'dc_commit_streams'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2138: warning: Excess function parameter 'stream_count' description in 'dc_commit_streams'
Fixes: e779f4587f ("drm/amd/display: Add handling for DC power mode")
Cc: Joshua Aberback <joshua.aberback@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit clean up some of the includes used by DCN.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds some comments to make easier to understand the clock
update for DCN 201, the encode function, and other minor comments.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DTN only logs 'pipe_count' instances of MPCC.
However in some cases there are different number of
MPCC than DPP (pipe_count).
[How]
Add mpcc_count parameter to resource_pool and set it
during pool construction and use it for DTN logging of
MPCC state.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit drops the RESERVE0 and RESERVE1 since both of them can be
summarized as RESERVED.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adjust bytes per pixel calculation to use div_u64.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set alpha_en to 0 in some specific color formats.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version pairs with DMUB FW Release 0.0.211.0 for dcn314, dcn35, dcn351
and brings along the following:
- Fix underflow in subvp/non-subvp configs
- Fix compiler warnings
- Add handling for DC power mode
- Add extra logging for DMUB, HUBP and OTG
- Add timing pixel encoding for mst mode validation
- Expand supported Replay residency mode
- Allow HPO PG and RCG for DCN35
- Update pipe topology log to support subvp
- Disable Z8 minimum stutter period check for DCN35
- Enable RCO for HDMISTREAMCLK in DCN35
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want to block IPS2 for static screen but allow it for power state
transitions.
[How]
Set DalDisableIPS=6 for DCN35 which allows:
1. RCG during static screen
2. RCG during LVP
3. IPS2 for display off / S0i3
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Enabling higher compiler warning levels results in many issues that can
be trivially resolved as well as some potentially critical issues.
[how]
Fix all compiler warnings found with various compilers and higher
warning levels. Primarily, potentially uninitialized variables and
unreachable code.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Move built test pattern as part of pipe resource update for odm to ensure we rebuild
test pattern params every time we have an ODM update
Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Future implementations will require a distinction between AC power and
DC power (wall power and battery power, respectively). To accomplish this,
adding a power mode parameter to certain dc interfaces, and adding a
separate DML2 instance for DC mode validation. Default behaviour unchanged.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When the DML2 wrapper explicitly accesses context->dml2, that creates a
dependency on where dc saves the DML object. This dependency makes it
harder to have multiple co-existing DML objects, which we would like to
have for upcoming functionality.
[How]
- make all DML21 interfaces take in a DML2 object as parameter
- remove all references to context->dml2, use parameter instead
Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Add logging for first DMUB inbox message that timed out to diagnostic
data
- It is useful to track the first failed message for debug purposes
because once DMUB becomes hung (typically on a message), it will
remain hung and all subsequent messages. In these cases we're
interested in knowing which is the first message that failed.
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why and how]
External display has corruption because no root clock control function. Add the function pointer to fix the issue.
Reviewed-by: Daniel Miess <daniel.miess@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Xi (Alex) Liu <xi.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The threshold is no longer useful for blocking suboptimal power states
for DCN35 based on real measurement.
[How]
Reduce to the minimum threshold duration, 1us.
Reviewed-by: Gabe Teeger <gabe.teeger@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Add extra logging for DCSURF_FLIP_CNTL, DCHUBP_CNTL,
OTG_MASTER_EN, and OTG_DOUBLE_BUFFER_CONTROL for more
debuggability for a system crash.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why && How]
OTG can be disabled before setting dpms on. Add check to skip wait
when setting AV mute if OTG is disabled.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
dynamic memory safety error detector (KASAN) catches and generates error
messages "BUG: KASAN: slab-out-of-bounds" as writeback connector does not
support certain features which are not initialized.
[HOW]
Skip them when connector type is DRM_MODE_CONNECTOR_WRITEBACK.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3199
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
HPO can be power gated unconditionally for
DCN35.
[How]
Set disable flag to false.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Enable root clock optimization for HDMISTREAMCLK and only
disable it when it's actively being used.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Some issues may require a trace of the previous SMU messages from DC to
understand the context and aid in debugging. Actual logging to be
implemented when needed.
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
As per programming guide, we need to
enable the virtual pixel clock via DTBCLK
DTO and ungate the clock before we begin
programming OPP/OPTC control registers.
Otherwise, the double-buffered registers
will be left pending until the clocks are enabled.
[how]
Move the DTBCLK DTO programming up to
where we do the legacy DP DTO programming.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There is an ambiguity in subvp pipe topology log. The log doesn't show
subvp relation to main stream and it is not clear that certain stream
is an internal stream for subvp pipes.
[how]
Separate subvp pipe topology logging from main pipe topology. Log main
stream indices instead of the internal stream for subvp pipes.
The following is a sample log showing 2 streams with subvp enabled on
both:
pipe topology update
________________________
| plane0 slice0 stream0|
|DPP1----OPP1----OTG1----|
| plane0 slice0 stream1|
|DPP0----OPP0----OTG0----|
| (phantom pipes) |
| plane0 slice0 stream0|
|DPP3----OPP3----OTG3----|
| plane0 slice0 stream1|
|DPP2----OPP2----OTG2----|
|________________________|
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Update dmub and driver interface for future FAMS revisions.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The function to count the number of valid connectors does not
guarantee that the first n indices are valid, only that there
exist n valid indices. When invalid indices are present, this
results in later valid connectors being missed, as processing
would end after checking n indices.
[How]
- count valid indices separately from total indices examined
- add explicit definition of MAX_LINKS
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] Mst slot nums equals to pbn / pbn_div.
Today, pbn_div refers to dm_mst_get_pbn_divider ->
dc_link_bandwidth_kbps. In dp_link_bandwidth_kbps,
which includes effect of FEC overhead already. As
result, we should not include effect of FEC overhead
again while calculating pbn by kpbs_to_peak_pbn
(stream_kbps).
[How] Include FEC overhead within dp_link_bandwidth_kbps.
Remove FEC overhead from kbps_to_peak_pbn.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Dmub provides several Replay residency calculation methods,
but current interface only supports either ALPM or PHY mode
[How]
Modify the interface for supporting different types
of Replay residency calculation.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Leon Huang <leon.huang1@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
With root clock optimization now enabled for DCN35 there
are still RCO registers still not being toggled
[How]
Add in logic to toggle RCO registers for DPPCLK,
DPSTREAMCLK and DSCCLK
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There could be cases that we are transition from MPC to ODM combine.
In this case if we map pipes before unmapping MPC pipes, we might
temporarly run out of pipes. The change reorders pipe resource
allocation. So we unmapping pipes before mapping new pipes.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In two display configuration, switching between subvp and non-subvp
may cause underflow because it moves an existing pipe between
displays
[How]
Create helper function for applying pipe split flags
Apply pipe split flags prior to deciding on subvp
During subvp check, do not merge pipes, so it can retain previous
pipe configuration
Add check for prev odm pipe in subvp check
For single display subvp case, use same odm policy for phantom pipes
as main subvp pipe
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] Mode pbn is not calculated correctly because timing pixel encoding is
not checked within convert_dc_color_depth_into_bpc.
[How] Get mode kbps from dc_bandwidth_in_kbps_from_timing, then calculate
pbn by kbps_to_peak_pbn.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Modified definitions of 1 function and 2 structs to remove warnings on
certain specific compiler configurations due to redefinition.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Mounika Adhuri <moadhuri@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a new DCN veriosn 3.5.1 need to load
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Deduplicate Kconfig entries for CONFIG_CXL_PMU
- Fix unselectable choice entry in MIPS Kconfig, and forbid this
structure
- Remove unused include/asm-generic/export.h
- Fix a NULL pointer dereference bug in modpost
- Enable -Woverride-init warning consistently with W=1
- Drop KCSAN flags from *.mod.c files
-----BEGIN PGP SIGNATURE-----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=tx+2
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Deduplicate Kconfig entries for CONFIG_CXL_PMU
- Fix unselectable choice entry in MIPS Kconfig, and forbid this
structure
- Remove unused include/asm-generic/export.h
- Fix a NULL pointer dereference bug in modpost
- Enable -Woverride-init warning consistently with W=1
- Drop KCSAN flags from *.mod.c files
* tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: Fix typo HEIGTH to HEIGHT
Documentation/llvm: Note s390 LLVM=1 support with LLVM 18.1.0 and newer
kbuild: Disable KCSAN for autogenerated *.mod.c intermediaries
kbuild: make -Woverride-init warnings more consistent
modpost: do not make find_tosym() return NULL
export.h: remove include/asm-generic/export.h
kconfig: do not reparent the menu inside a choice block
MIPS: move unselectable FIT_IMAGE_FDT_EPM5 out of the "System type" choice
cxl: remove CONFIG_CXL_PMU entry in drivers/cxl/Kconfig
The -Woverride-init warn about code that may be intentional or not,
but the inintentional ones tend to be real bugs, so there is a bit of
disagreement on whether this warning option should be enabled by default
and we have multiple settings in scripts/Makefile.extrawarn as well as
individual subsystems.
Older versions of clang only supported -Wno-initializer-overrides with
the same meaning as gcc's -Woverride-init, though all supported versions
now work with both. Because of this difference, an earlier cleanup of
mine accidentally turned the clang warning off for W=1 builds and only
left it on for W=2, while it's still enabled for gcc with W=1.
There is also one driver that only turns the warning off for newer
versions of gcc but not other compilers, and some but not all the
Makefiles still use a cc-disable-warning conditional that is no
longer needed with supported compilers here.
Address all of the above by removing the special cases for clang
and always turning the warning off unconditionally where it got
in the way, using the syntax that is supported by both compilers.
Fixes: 2cd3271b7a ("kbuild: avoid duplicate warning options")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[WHY & HOW]
DCN351 and DCN35 should use the same bounding box and IP settings.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Xi Liu <xi.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
NumFclkLevelsEnabled is used for DcfClocks bounds check
instead of designated NumDcfClkLevelsEnabled.
That can cause array index out-of-bounds access.
[How]
Use designated variable for dcn35 DcfClocks bounds check.
Fixes: a8edc9cc0b ("drm/amd/display: Fix array-index-out-of-bounds in dcn35_clkmgr")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
MPC flow rate control is not needed for DCN30 and above. Current logic
that uses it can result in underflow for certain edge cases (such as
DSC N422 + ODM combine + 422 left edge pixel).
[How]
Remove MPC flow rate control logic and programming for DCN30 and above.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
In some platform out_transfer_func may not be popualted. We need to check
for null before dereferencing it.
Fixes: d2dea1f140 ("drm/amd/display: Generalize new minimal transition path")
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previous patch to allow DTBCLK disable didn't address boot case. Driver
thinks DTBCLK is disabled by default, so we don't send disable message to
PMFW. DTBCLK is then enabled at idle desktop on boot, burning power.
[How]
Set dtbclk_en to true on boot so that disable message is sent during first
commit.
Fixes: 27750e176a ("drm/amd/display: Allow DTBCLK disable for DCN35")
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
There were some fixes in dcn35 that need
to be ported over to dcn351 to prevent any
regression.
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Reviewed-by: Liu, Xi (Alex) <xiliu102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to re-enable idle power optimizations after entering PSR. Since,
we get kicked out of idle power optimizations before entering PSR
(entering PSR requires us to write to DCN registers, which isn't allowed
while we are in IPS).
Fixes: a9b1a4f684 ("drm/amd/display: Add more checks for exiting idle in DC")
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This causes flicker on a bunch of eDP panels. The info_packet code
also caused regressions on other OSes that we haven't' seen on Linux
yet, but that is likely due to the fact that we haven't had a chance
to test those environments on Linux.
We'll need to revisit this.
This reverts commit 202260f645.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3207
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3151
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why and how]
Bounding box clocks for DCN351 should be increased as per request
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Xi Liu <xi.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Disabling stream encoder invokes a function that no longer exists.
[How]
Check if the function declaration is NULL in disable stream encoder.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Increase Z8 watermark times from 210->250us and 320->350us.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Natanel Roizenman <natanel.roizenman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
DCN351 and DCN35 should use the same bounding box and IP settings.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Xi Liu <xi.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix some bound and NULL check
- Fix nonseamless transition from ODM + MPO to ODM + subvp
- Allow Z8 when stutter threshold is not met
- Remove plane and stream pointers from dc scratch
- Remove read/write to external register
- Increase number of hpo dp link encoders
- Increase clock table size
- Add new IPS config mode
- Build scaling params when a new plane is appended
- Refactor DML2 interfaces
- Allow idle opts for no flip case on PSR panel
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Driver crashes when pipe idx not set properly
[how]
Add code to skip the pipe that idx not set properly
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Converting the watermark set structure to a union and modifying some interfaces
to accommodate future usage.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Remove several plane and stream pointers from dc for code
refactoring.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Number of hpo dp2 link encoders is increased.
Instances are changed.
[How]
Increased size in resource pool, init for each instance
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Sridevi Arvindekar <sridevi.arvindekar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
To prevent out of bounds error, we need
to increase the clock table size.
Reviewed-by: Xi Liu <xi.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Some panels don't meet the stutter threshold (4k etc), this leads to
power regressions. Allow z8 for panels that don't meet the threshold
but support PSR/replay
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Some panels don't meet the stutter threshold (4k etc), this leads to
power regressions. Allow z8 for panels that don't meet the threshold
but support PSR/replay
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We don't have a way to specify IPS2 for display off but RCG only for
static screen and local video playback.
[How]
Add a new setting that allows RCG only when displays are active but
IPS2 when all displays are off.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
NumFclkLevelsEnabled is used for DcfClocks bounds check
instead of designated NumDcfClkLevelsEnabled.
That can cause array index out-of-bounds access.
[How]
Use designated variable for dcn35 DcfClocks bounds check.
Fixes: a8edc9cc0b ("drm/amd/display: Fix array-index-out-of-bounds in dcn35_clkmgr")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
MPC flow rate control is not needed for DCN30 and above. Current logic
that uses it can result in underflow for certain edge cases (such as
DSC N422 + ODM combine + 422 left edge pixel).
[How]
Remove MPC flow rate control logic and programming for DCN30 and above.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
We are boundling changes in plane state and build scaling params
together. This is to simplify DML code so DML doesn't need to build
scaling params. We are also avoiding rebuilding scaling params for
planes without scaling changes.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
when ODM + MPO is used for all 4 available pipes. Pipe transition will
be nonseamless. Phantom OTG master pipe reuses the secondary OPP head
pipe. There is no possible seamless path to transit to the new
state. The correct logic would be to reuse a secondary DPP pipe as the
phantom OTG master pipe. This way we are able to first transit the
minimal transtion state of new and then transit to new state seamlessly.
current New (nonseamless)
________________________ ________________________
| plane0 slice0 stream0| | plane0 slice0 stream0|
|DPP0----OPP0----OTG0----| |DPP0----OPP0----OTG0----|
| plane1 | | | | plane0 slice1 | |
|DPP2----| | | |DPP2----OPP2----| |
| plane0 slice1 | | | plane0 slice0 stream1|
|DPP1----OPP1----| | |DPP1----OPP1----OTG1----|
| plane1 | | | plane0 slice1 | |
|DPP3----| | |DPP3----OPP3----| |
|________________________| |________________________|
New (seamless) New (minimal transition)
________________________ ________________________
| plane0 slice0 stream0| | plane0 slice0 stream0|
|DPP0----OPP0----OTG0----| |DPP0----OPP0----OTG0----|
| plane0 slice1 | | | plane0 slice1 | |
|DPP1----OPP1----| | |DPP1----OPP1----| |
| plane0 slice0 stream1| |________________________|
|DPP2----OPP2----OTG2----|
| plane0 slice1 | |
|DPP3----OPP3----| |
|________________________|
[how]
Try to acquire free pipes used as secondary DPP pipes from current state
before try to acquire any free pipes for new OTG master pipe.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
In some platform out_transfer_func may not be popualted. We need to check
for null before dereferencing it.
Fixes: d2dea1f140 ("drm/amd/display: Generalize new minimal transition path")
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How}
Some interfaces needed changes to support future architectures.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
These additional callbacks to DC will be required for the DML2 wrapper. Also
consolidate common callbacks for projects to a single location for maintenance.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
We need to remove the reference to these registers to
prevent any usage in the future.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previous patch to allow DTBCLK disable didn't address boot case. Driver
thinks DTBCLK is disabled by default, so we don't send disable message to
PMFW. DTBCLK is then enabled at idle desktop on boot, burning power.
[How]
Set dtbclk_en to true on boot so that disable message is sent during first
commit.
Fixes: 27750e176a ("drm/amd/display: Allow DTBCLK disable for DCN35")
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Previously, we'd disabled HPO whenever an HPO display was disconnected. This
caused other HPO displays to blank whenever one was unplugged.
[HOW]
This change restricts HPO enable/disable to dce110_apply_ctx_to_hw and adds a
helper function (dce110_is_hpo_enabled) that returns true if any HPO displays
are present in a context. We compare the current and previous dc ctx to check
whether HPO is transitioning from on to off or vice versa, and adjust the HPO
state accordingly.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Natanel Roizenman <natanel.roizenman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
There were some fixes in dcn35 that need
to be ported over to dcn351 to prevent any
regression.
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Reviewed-by: Liu, Xi (Alex) <xiliu102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to re-enable idle power optimizations after entering PSR. Since,
we get kicked out of idle power optimizations before entering PSR
(entering PSR requires us to write to DCN registers, which isn't allowed
while we are in IPS).
Fixes: a9b1a4f684 ("drm/amd/display: Add more checks for exiting idle in DC")
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
There is a corner case where a single PSR panel
fails to enter idle optimizations if the panel
is not flipping (no planes or DPMS_OFF == true).
This is because the panel will not enter PSR if it's
not flipping, but this will prevent the FW idle opt
path from being executed. To handle this case we will
allow entry to idle opt from driver side even when a
PSR panel is connected under the following scenarios:
1. Only a single PSR panel is connected
2. PSR panel is not flipping
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This causes flicker on a bunch of eDP panels. The info_packet code
also caused regressions on other OSes that we haven't' seen on Linux
yet, but that is likely due to the fact that we haven't had a chance
to test those environments on Linux.
We'll need to revisit this.
This reverts commit 202260f645.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3207
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3151
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix few problems for DCN35
- Fix a bug which dereferences freed memory
- Enable new interface design for alternate scrambling
- Enhance IPS handshake
- Increase Z8 watermark times
- Fix DML2 problem
- Revert patch which cause regression
- Fix problems for dmub idle power optimization
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
For DML2 to decouple it from other DML versions.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
During minimal transition commit, the base state could be freed if it is current state.
This is because after committing minimal transition state, the current state will be
swapped to the minimal transition state and the old current state will be released.
the release could cause the old current state's memory to be freed. However dc
will derefernce this memory when release minimal transition state. Therefore, we
need to retain the old current state until we release minimal transition state.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
It was previously disabled for stability purposes, but command
submission causes residency issues in IPS video playback.
[How]
Enable the disallow/reallow pattern back. There's additional checks
now in DMCUB that should make this safer stability wise.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
To enable a new interface so alternate scrambling can be done via
security module.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The hard coded DPM states are only used to fix mismatch states numbers from FW.
[How]
Remove when not needed.
Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Xi Liu <xi.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
It's possible to skip parts of the eval and exit sequencing if we know
whether DCN is in IPS2 already or if it's committed to going to idle
and not in IPS2.
[How]
Skip IPS2 entry/exit if DMCUB is idle but the IPS2 commit is not set.
Skip the eval delay if DMCUB is already in IPS2 since we know we need
to exit.
These are turned off by default.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Cursor updates can be preempted by queued flips in some DMs.
The synchronization model causes this to occur within the same thread
at an intermediate level when we insert logs into the OS queue.
Since this occurs on the same thread and we're still holding the lock
(recursively) the cache is coherent.
The exit sequence will run twice since we technically haven't finished
the exit the first time, so we need a way to detect and avoid the
reallow in the middle of this call to prevent the hang on the cursor
update that was preempted.
[How]
Keep a counter that tracks the depth of the exit calls. Do not reallow
until the counter is zero.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why and how]
Bounding box clocks for DCN351 should be increased as per request
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Xi Liu <xi.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Disabling stream encoder invokes a function that no longer exists.
[How]
Check if the function declaration is NULL in disable stream encoder.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Increase Z8 watermark times from 210->250us and 320->350us.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Natanel Roizenman <natanel.roizenman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
APU has different refclk as dGPU which is used for AUX_DPHY setup
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added debug prints for zstate_support and StutterPeriod in
dcn35_decide_zstate_support for testing.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Natanel Roizenman <natanel.roizenman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Even if memory lower power feature policy states that it is disabled,
VPG memory should still be poweerd on if it is currently disabled when
requested.
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
need to apply the debug key check for max displayclk.
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Cursor update can be pre-empted by a request for setting target flip
submission.
This causes an issue where we're in the middle of the exit sequence
trying to log to DM, but the pre-emption starts another DMCUB
command submission that requires being out of idle.
The DC lock aqusition can fail, and depending on the DM/OS interface
it's possible that the function inserted into this thread must not fail.
This means that lock aqusition must be skipped and exit *must* occur.
[How]
Modify when we consider idle as active. Consider it exited only once
the exit has fully finished.
Consider it as entered prior to actual notification.
Since we're on the same core/thread the cached values are coherent
and we'll see that we still need to exit. Once the cursor update resumes
it'll continue doing the double exit but this won't cause a functional
issue, just a (potential) redundant operation.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Clear mpc_tree in init_pipes
- Program pixclk according to dcn revision
- Add stream clock source to DP DTO params
- Enabling urgent latency adjustment for DCN35
- To adjust dprefclk by down spread percentage
- Add debug option for idle reg checks
- Revert few patches which cause regression
- skip forcing odm in minimal transition
- Fix noise issue on HDMI AV mute
- Enable fast update for DCN314
- Enable 2to1 ODM policy for DCN35
- Fix DCN31 underflow problem
- Add the MALL size in the fallback function
- Modify coding style/errors and remove redundant codes
- Add missing registers and offset
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add a Replay residency mode which only calcuates the
entry time based on replay state 0/1 switch.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During init_pipes, otg master is not initialized. So mpc tree is
still configured even if mpc bottom is not active
[How]
For pipes that have tg enabled, check their mpc tree and clear
opp_list if mpc bottom is not active
Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Pixel clock programming should be built per dcn revision, not hardcoded to use
dcn20.
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Stream clock source is a required parameter for DP DTO programming.
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pipe_ctx->plane_res.mpcc_inst is of a type that can only hold values
between 0 and 255, so it's always greater than or equal to 0.
Thus the condition 'pipe_ctx->plane_res.mpcc_inst >= 0' was always true
and has been removed.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn35/dcn35_hwseq.c:1023 dcn35_calc_blocks_to_gate() warn: always true condition '(pipe_ctx->plane_res.mpcc_inst >= 0) => (0-255 >= 0)'
Fixes: 6f8b7565cc ("drm/amd/display: Add DCN35 HWSEQ")
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adds descriptions for 'new_context', 'srf_updates', and
'surface_count', and removes the excess description for 'context'.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4411: warning: Function parameter or member 'new_context' not described in 'commit_minimal_transition_state_in_dc_update'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4411: warning: Function parameter or member 'srf_updates' not described in 'commit_minimal_transition_state_in_dc_update'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4411: warning: Function parameter or member 'surface_count' not described in 'commit_minimal_transition_state_in_dc_update'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4411: warning: Excess function parameter 'context' description in 'commit_minimal_transition_state_in_dc_update'
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Underflow occurs when running netflix in a 4k144 eDP + 4k60 setup.
Increasing DCFCLK or urgent latency watermark fixes the issue. Implementing
this workaround for now while we figure out why this is happenning in DCN.
[How]
Enable urgent latency adjustment and match the reference to existing ASIC
that also see increased latency at low FCLK.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Leave disabled by default due to sequencing issues around power states
where these flags aren't properly reset.
[How]
Allow re-enabling from DC debug option.
Reviewed-by: Gabe Teeger <gabe.teeger@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In minial transitions state, ODM combine shouldn't be forced as it will
make transition non seamless. The force ODM debug option is to control
the end result not the intermediate transition. So we can temporarily
disable ODM forcing when committing minimal transition state.
[how]
Backup stream ODM forcing option and clear it in minimal transition
state. Once minimal transition state is released, we will restore the
original debug option back.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
This commit just drop some old comments and update a typo in another
one.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Hostvm should be enabled/disabled accordding to the status of
riommu_active, but hostvm always be disabled on DCN31 which causes
underflow
[How]
Set correct hostvm flag on DCN31
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Sherry Wang <Yao.Wang1@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Remove legacy code which is unnecessary.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Enable legacy fast update for DCN314
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
DCN3_16_MIN_COMPBUF_SIZE_KB is defined in the dcn316_resource.c file.
This header fit better in the dcn31_fpu.h together with similar defines.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
If the driver has issues retrieving the MALL size for the specific
hardware, it might fail since the current value is set to zero. This
commit addresses this issue by adding a simple constant value to give
the drive a chance to start.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
This fixes indentations and adjust spaces for better readability and
code styles.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
dcn32_smu_transfer_wm_table_dram_2_smu is defined twice so one is
removed. Also adjust prototype orders.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Enable 2to1 ODM policy for DCN35
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In some of the merge conflict fixes, one '+' was accidentally left at
the beginning of the line. Fortunately, this did not cause any major
issues since it acted as a number signal. This commit addresses this
issue by removing the extra '+'.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 54d9490314 ("drm/amd/display: Set the power_down_on_boot
function pointer to null")
[why & how]
This commit breaks S0i3 entry because DCN does not enter IPS2.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Blackscreen hang @ PC EF000025 when trying to wake up from S0i3. DCN
gets powered off due to dc_power_down_on_boot() being called after
timeout.
[HOW]
Setting the power_down_on_boot function pointer to null since we don't
expect the function to be called for APU.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Support long vblank feature
- Add monitor patch for specific eDP
- Init DPPCLK from SMU on dcn32
- Update odm when ODM combine is changed on an otg master pipe with
no plane
- Fix idle check for shared firmware state
- Add guards for idle on reg read/write
- Guard cursor idle reallow by DC debug option
- Add debug counters to IPS exit prints
- Add left edge pixel for YCbCr422/420 + ODM pipe split
- Amend coasting vtotal for replay low hz
- Refactor DPP into a component directory
- Set the power_down_on_boot function pointer to null
- Implement update_planes_and_stream_v3 sequence
- Lock all enabled otg pipes even with no planes
- Implement wait_for_odm_update_pending_complete
- Add a dc_state NULL check in dc_state_release
- Backup and restore only on full updates
- Update DMUB flags and definitions
- Return the correct HDCP error code
- Add comments to v_total calculation and drop legacy TODO
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Since the backup and restore for plane and stream states has
a significant amount of data to copy, we will change the backup
and restore sequence to only take place during full updates.
We will also move the scratch memory to struct dc instead of dc_state
to avoid needing to allocate large amounts of memory every time
we create a new DC state.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Update planes and stream version 3 separates FULL and FAST updates
to their own sequences. It aims to clean up frequent checks for
update type resulting unnecessary branching in logic flow. It also
adds a new commit minimal transition sequence, which detects the need
for minimal transition based on the actual comparison of current and
new states instead of "predicting" it based on per feature software
policy, i.e. could_mpcc_tree_change_for_active_pipes.
The new commit minimal transition sequence is made universal to any
power saving features that would use extra free pipes such as Dynamic
ODM/MPC Combine, MPO or SubVp. Therefore there is no longer a need to
specially handle compatibility problems with transitions among those
features as they are now transparent to the new sequence.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
This commit just adds some simple comments to help understand the
calculation of V total duration for Freesync. Also, remove a legacy TODO
comment from link service type.
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
- Update replay residency tracing design to support more types
including tracking PHY and ALPM residency types
- Add commands for Replay frame update count profiling
- Enhance HWFQ with additional flags to allow for more
optimized IPS low power state residencies
- Add new flag to indicate if a new frame update needed for
ABM to ramp up into steady state
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Move all dpp files to a new dpp directory.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Revalla Hari Krishna <harikrishna.revalla@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
To have a log of the entry/exit counters in case the system hangs to
measure stability.
[HOW]
Read them from firmware state and pass them to the prints.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
To control whether idle optimizations reallowed after the first cursor
update.
[HOW]
Add checks to the conditions.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
If DCN is in idle then we should not be accessing DCN registers or
it can lead to hangs.
[HOW]
Log the error and return 0 or drop the write if it's in idle.
This is skipped in the exit sequence itself since the boolean flips
before it starts.
It also does not cover accesses from external clients outside of DM/DC
like firmware or the kernel mode driver.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes index out of bounds issue in the color transformation function.
The issue could occur when the index 'i' exceeds the number of transfer
function points (TRANSFER_FUNC_POINTS).
The fix adds a check to ensure 'i' is within bounds before accessing the
transfer function points. If 'i' is out of bounds, an error message is
logged and the function returns false to indicate an error.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:405 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:406 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:407 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max
Fixes: b629596072 ("drm/amd/display: Build unity lut for shaper")
Cc: Vitaly Prosyak <vitaly.prosyak@amd.com>
Cc: Charlene Liu <Charlene.Liu@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We want to support low hz case, but the original
vtotal/vtotal_min/vtotal_max can't support more
than 0x7FFF.
[HOW]
We use the 2 HW reg to contorl long vblank case.
1. OTG_V_COUNT_STOP_CONTROL -> vcount_stop
2. OTG_V_COUNT_STOP_CONTROL2 -> vcount_stop_timer
vcount_stop define from which line we stop using vcount
and start using vcount2.
vcount_stop_timer define how long we use vcount2.
Ex:
Vtotal = 7
OTG_V_COUNT_STOP_CONTROL = 4
OTG_V_COUNT_STOP_CONTROL2 = 5
time : 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
vcount : 0, 1, 2, 3, - - - - - 4, 5, 6
vcount2 : 0, 1, 2, 3, 4,
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: ChunTao Tso <chuntao.tso@amd.com>
Signed-off-by: Robin Chen<robin.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Change default size for dummy plane in DML2
- Enable DML2 debug flags
- Add some forward declarations
- Add DML2 folder to include path
- Set DCN351 BB and IP the same as DCN35
- Override min required DCFCLK in dml1_validate
- Fix function banner for amdgpu_dm_psr_disable_all()
- Allow dirty rects to be sent to dmub when abm is active
- Add debug key to allow disabling dtbclk
- Add debug prints for IPS testing
- Exit idle optimizations before HDCP execution
- Add entry and exit counters
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Add new counters in the shared IPS firmware state.
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
To log commit states and when we transition in/out of allow and idle
states and the caller.
[HOW]
Add a new logging helper and wrap idle optimization calls to receive
the caller.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[HOW]
Add debug key to allow disabling dtbclk
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Incorrect function name in function banner.
[HOW]
Correct name and brief description.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add DML2 pipe and config struct forward declaration as a
preparation for DML2.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit e2fdd5c525 ("drm/amd/display: Add left edge pixel for
YCbCr422/420 + ODM pipe split")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: George Shen <george.shen@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Currently 3-tap chroma subsampling is used for YCbCr422/420. When ODM
pipesplit is used, pixels on the left edge of ODM slices need one extra
pixel from the right edge of the previous slice to calculate the correct
chroma value.
Without this change, the chroma value is slightly different than
expected. This is usually imperceptible visually, but it impacts test
pattern CRCs for compliance test automation.
[HOW]
Update logic to use the register for adding extra left edge pixel for
YCbCr422/420 ODM cases.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
why and how:
causes black screen on PNP on DCN 3.5
This reverts commit f30a3bea92 ("drm/amd/display: Exit idle
optimizations before HDCP execution")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Martin Leung <martin.leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
PSP can access DCN registers during command submission and we need
to ensure that DCN is not in PG before doing so.
[HOW]
Add a callback to DM to lock and notify DC for idle optimization exit.
It can't be DC directly because of a potential race condition with the
link protection thread and the rest of DM operation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When mode switching is triggered there is momentary noise visible on
some HDMI TV or displays.
[How]
Wait for 2 frames to make sure we have enough time to send out AV mute
and sink receives a full frame.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 340383c734 ("drm/amd/display: Remove pixle rate
limit for subvp")
[why]
The original commit causes a regression when subvp is applied
on ODM required 8k60hz timing. The display shows black screen
on boot. The issue can be recovered with hotplug. It also causes
MPO to fail. We will temprarily revert this commit and investigate
the root cause further.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[How]
Check wheather state is NULL before releasing it.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Allen Pan <allen.pan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
If the display is null when creating an HDCP session, return a proper
error code.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Odm update is doubled buffered. We need to wait for ODM update to be
completed before optimizing bandwidth or programming new udpates.
[HOW]
implement wait_for_odm_update_pending_complete function to wait for:
1. odm configuration update is no longer pending in timing generator.
2. no pending dpg pattern update for each active OPP.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
On DCN32 we support dynamic ODM even when OTG is blanked. When ODM
configuration is dynamically changed and the OTG is on blank pattern,
we will need to reprogram OPP's test pattern based on new ODM
configuration. Therefore we need to lock the OTG pipe to avoid temporary
corruption when we are reprogramming OPP blank patterns.
[HOW]
Add a new interdependent update lock implementation to lock all enabled
OTG pipes even when there is no plane on the OTG for DCN32.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The original coasting vtotal is 2 bytes, and it need to
be amended to 4 bytes because low hz case.
[HOW]
Amend coasting vtotal from 2 bytes to 4 bytes.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: ChunTao Tso <chuntao.tso@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We still had an instance of get_idle_state checking the PMFW scratch
register instead of the actual idle allow signal.
[HOW]
Replace it with the SW state check for whether we had allowed idle
through notify_idle.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When committing an update with ODM combine change when the plane is
removing or already removed, we fail to detect odm change in pipe
update flags. This has caused mismatch between new dc state and the
actual hardware state, because we missed odm programming.
[HOW]
- Detect odm change even for otg master pipe without a plane.
- Update odm config before calling program pipes for pipe with planes.
The commit also updates blank pattern programming when odm is changed
without plane. This is because number of OPP is changed when ODM
combine is changed. Blank pattern is per OPP so we will need to
reprogram OPP based on the new pipe topology.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
DPPCLK ranges should be obtained from the SMU when available.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Some eDP panels' ext caps don't write initial values. The value of
dpcd_addr (0x317) can be random and the backlight control interface
will be incorrect.
[HOW]
Add new panel patches to remove sink ext caps.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.5.x
Cc: Tsung-hua Lin <tsung-hua.lin@amd.com>
Cc: Chris Chi <moukong.chi@amd.com>
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ryan Lin <tsung-hua.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
It's beneficial for ABM to know when new frame data are available.
[HOW]
Add new condition to allow dirty rects to be sent to DMUB when ABM is
active. ABM will use this as a signal that a new frame has arrived.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Josip Pavic <josip.pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]:
Increasing min DCFCLK addresses underflow issues that occur when phantom
pipe is turned on for some Sub-Viewport configs
[HOW]:
dcn32_override_min_req_dcfclk is added to override DCFCLK value in
dml1_validate when subviewport is being used.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Sohaib Nadeem <sohaib.nadeem@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Currently, to map dc states into dml_display_cfg,
We create a dummy plane if the stream doesn't have any planes
attached to it. This dummy plane uses max addersable width height.
This results in certain mode validations failing when they shouldn't.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Swapnil Patel <swapnil.patel@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For linux-next repository.
./drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h:1: warning: no structured comments found
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:132: warning: Incorrect use of kernel-doc format: * @@overlap_only: Whether overlapping of different planes is allowed.
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:132: warning: Incorrect use of kernel-doc format: * @@overlap_only: Whether overlapping of different planes is allowed.
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:1: warning: no structured comments found
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:132: warning: Incorrect use of kernel-doc format: * @@overlap_only: Whether overlapping of different planes is allowed.
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:162: warning: Function parameter or struct member 'pre_multiplied_alpha' not described in 'mpcc_blnd_cfg'
Signed-off-by: R SUNDAR <prosunofficial@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to check the offset bits for values greater than 255.
v2: also update amdgpu_dm_connector values.
Suggested-by: Mano Ségransan <mano.segransan@protonmail.com>
Tested-by: Mano Ségransan <mano.segransan@protonmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3203
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add Display Manager specific changes for DCN3.5.1.
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DMUB support is required to light-up displays.
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 11b92df8a2.
This conflicts with how compositors want to handle VRR. Now
that compositors actually handle VRR, we probably don't need
freesync video.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2985
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This vendor specific property has never been used by userspace
software and conflicts with the panel_power_savings sysfs file.
That is a compositor and user could fight over the same data.
Fixes: 63d0b87213 ("drm/amd/display: add panel_power_savings sysfs entry to eDP connectors")
Suggested-by: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Cc: "Sun peng Li (Leo)" <Sunpeng.Li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adds a check in the map_hw_resources function to prevent a potential
buffer overflow. The function was accessing arrays using an index that
could potentially be greater than the size of the arrays, leading to a
buffer overflow.
Adds a check to ensure that the index is within the bounds of the
arrays. If the index is out of bounds, an error message is printed and
break it will continue execution with just ignoring extra data early to
prevent the buffer overflow.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_wrapper.c:79 map_hw_resources() error: buffer overflow 'dml2->v20.scratch.dml_to_dc_pipe_mapping.disp_cfg_to_stream_id' 6 <= 7
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_wrapper.c:81 map_hw_resources() error: buffer overflow 'dml2->v20.scratch.dml_to_dc_pipe_mapping.disp_cfg_to_plane_id' 6 <= 7
Fixes: 7966f319c6 ("drm/amd/display: Introduce DML2")
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Roman Li <roman.li@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmXb0T4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG5YQH/3eCV90sNGch0Y94
8rtTdqFrVx7QPNl0pz+Mo6OUIKUUHvTuwime16ckLxG+3x2Y3I0MjP1edd1NB99C
Kje//JTpaZBPpTZ/jY4u8B1Shov2Drdx/J4NFnE/9rG6yXzKQBtvON/xAxXDCVHT
mLhst2LR0FeCSMk9jAX6CoqUPEgwlylNyAetKxaDQgoHl4GTZC7FDO17WxyjpIxe
1rVHsrV9Eq8kD4uxrzpTYWgZrwTObPmlZjvefa1JfzSwRNABIBJj/C1nra1Zc1oi
b7xVaXS1cMOxrtuuG00fmHsPnWivu0tuND7H3/yLd1mRCZAPSsVbVvrI/KNtoeV4
1euINlY=
=7IFt
-----END PGP SIGNATURE-----
Merge v6.8-rc6 into drm-next
Thomas Zimmermann asked to backmerge -rc6 for drm-misc branches,
there's a few same-area-changed conflicts (xe and amdgpu mostly) that
are getting a bit too annoying.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[Why]
Currently there is an error while translating input clock sates into
output clock states. The highest fclk setting from output sates is
being dropped because of this error.
[How]
For dcn35 and dcn351, make output_states equal to input states.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Swapnil Patel <swapnil.patel@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes potential null pointer dereference warnings in the
dc_dmub_srv_cmd_list_queue_execute() and dc_dmub_srv_is_hw_pwr_up()
functions.
In both functions, the 'dc_dmub_srv' variable was being dereferenced
before it was checked for null. This could lead to a null pointer
dereference if 'dc_dmub_srv' is null. The fix is to check if
'dc_dmub_srv' is null before dereferencing it.
Thus moving the null checks for 'dc_dmub_srv' to the beginning of the
functions to ensure that 'dc_dmub_srv' is not null when it is
dereferenced.
Found by smatch & thus fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:133 dc_dmub_srv_cmd_list_queue_execute() warn: variable dereferenced before check 'dc_dmub_srv' (see line 128)
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_is_hw_pwr_up() warn: variable dereferenced before check 'dc_dmub_srv' (see line 1164)
Fixes: 028bac5834 ("drm/amd/display: decouple dmcub execution to reduce lock granularity")
Fixes: 65138eb72e ("drm/amd/display: Add DCN35 DMUB")
Cc: JinZe.Xu <jinze.xu@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Josip Pavic <josip.pavic@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The old asic only have 1 pwrseq hw.
We don't need to map the diginst to pwrseq inst in old asic.
[How]
1. Only mapping dig to pwrseq for new asic.
2. Move mapping function into dcn specific panel control component
Cc: Stable <stable@vger.kernel.org> # v6.6+
Cc: Mario Limonciello <mario.limonciello@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3122
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Lewis Huang <lewis.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Observe error message "Can't retrieve aconnector in hpd_rx_irq_offload_work"
when boot up with a mst tbt4 dock connected. After analyzing, there are few
parts needed to be adjusted:
1. hpd_rx_offload_wq[].aconnector is not initialzed before the dmub outbox
hpd_irq handler get registered which causes the error message.
2. registeration of hpd and hpd_rx_irq event for usb4 dp tunneling is not
aligned with legacy interface sequence
[How]
Put DMUB_NOTIFICATION_HPD and DMUB_NOTIFICATION_HPD_IRQ handler
registration into register_hpd_handlers() to align other interfaces and
get hpd_rx_offload_wq[].aconnector initialized earlier than that.
Leave DMUB_NOTIFICATION_AUX_REPLY registered as it was since we need that
while calling dc_link_detect(). USB4 connection status will be proactively
detected by dc_link_detect_connection_type() in amdgpu_dm_initialize_drm_device()
Cc: Stable <stable@vger.kernel.org>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The is_psr_su parameter is a boolean flag indicating whether the Panel
Self Refresh Selective Update (PSR SU) feature is enabled which is a
power-saving feature that allows only the updated regions of the screen
to be refreshed, reducing the amount of data that needs to be sent to
the display.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:5257: warning: Function parameter or member 'is_psr_su' not described in 'fill_dc_dirty_rects'
Fixes: d16df040c8 ("drm/amdgpu: make damage clips support configurable")
Cc: stable@vger.kernel.org
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are trying to get rid of all multiplications from allocation
functions to prevent integer overflows. Here the multiplication is
obviously safe, but using kcalloc() is more appropriate and improves
readability. This patch has no effect on runtime behavior.
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Link: https://github.com/KSPP/linux/issues/162
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Lenko Donchev <lenko.donchev@gmail.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following:
- Re-enable windowed MPO support for DCN32/321
- Improvements in the subvp feature
- Code clean up
- USB4 fixes
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Nanosec stats can overflow on long running systems potentially causing
statistic logging issues.
[How]
Use 64bit types for nanosec stats to ensure no overflow.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A long time ago, the slab header was added to multiple files in DC. We
also included it in the os_types.h, which is included in many of those
DC files. At this point, there is no need to insert the slab.h header in
multiple files, so this commit drops those includes.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The feature was disabled due to regression found during testing. Now
that all the pending issues are addressed, we are reenabling the power
saving feature again.
The feature optimizes dispclk level when user is using MPO capable
broswers or watching MPO capable videos in windowed mode. The feature
achieves power optimization by utilizing free pipes to process incoming
pixels in parallel. So it reduces max dispclk requirements for each
pipe.
Previously ODM power optimization will be disabled when MPO plane is
present due to technical challeges. This is mainly because ODM divides
pixel workload with respect to stream but MPO plane position and size
are arbitrary with respect to stream. The pixel processing workload of
an MPO plane is not guarenteed to be evenly distributed across DCN pipes.
For example if a plane is moved inside single ODM slice, all the
processing for the plane is distributed to the pipe in the current ODM
slice, while the other ODM slices don't need to process this plane. If
the plane is then moved to the middle crosing two ODM slices, each ODM
slice gets half of the workload. This is especially difficult when the
plane itself has a large source rect which can't be processed by single
DCN pipe. In this case we can't enable ODM power optimization when the
plane is only within one ODM slice.
[how]
To overcome the challeges, new pipe resource management is in place to
make sure a plane is validated with ODM power optimization support if
it can be validated regardless of its position and the same pipe
topology can be used regardless of the plane's position. When the plane
is moved outside current ODM slice, we will set recout to 0 so the pipe
can be idling without the need to update pipe topology. When the user
resizes a plane, it may result in downscaling ratio changes. When the
downscaling ratio is above single pipe's threshold, we will seamlessly
exit ODM power optimization and applies MPC combine to support the plane.
when downscaling ratio becomes smaller, we will seamlessly enter ODM
power optimization again. All these pipe transitions happen
automatically and quietly when the conditions are met without any visual
impacts to the user.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Subvp bugs related to 8K60 have been fixed, so remove the limit that
blocks 8K60 timings from enabling SubVP.
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prevent logs during a prepare_bandwidth call to ensure log accuracy.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Ethan Bitnun <etbitnun@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently there is an error while translating input clock sates into
output clock states. The highest fclk setting from output sates is
being dropped because of this error.
[How]
For dcn35 and dcn351, make output_states equal to input states.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Swapnil Patel <swapnil.patel@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously the new minimal transition path was only used for windowed
MPO + ODM for plane scaling updates. However, we want to generalize the
transition for all cases whenever a non-seamless transition is detected
(such as for MPO -> SubVP + MPC).
To make this change we add pointers in the plane state, stream, and
pointers in the stream state to the dc_scratch state and backup and
restore these so the minimal transition can take place successfully.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently, driver state for DCN3.2 is not strictly matching HW state for
the USBC port. To reduce inconsistencies while debugging, the driver
should match HW configuration.
[How]
Update link encoder flag to indicate USBC port. Call into DMUB to check
when DP Alt mode is entered, and also to check for 2-lane versuse 4-lane
mode.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes potential null pointer dereference warnings in the
dc_dmub_srv_cmd_list_queue_execute() and dc_dmub_srv_is_hw_pwr_up()
functions.
In both functions, the 'dc_dmub_srv' variable was being dereferenced
before it was checked for null. This could lead to a null pointer
dereference if 'dc_dmub_srv' is null. The fix is to check if
'dc_dmub_srv' is null before dereferencing it.
Thus moving the null checks for 'dc_dmub_srv' to the beginning of the
functions to ensure that 'dc_dmub_srv' is not null when it is
dereferenced.
Found by smatch & thus fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:133 dc_dmub_srv_cmd_list_queue_execute() warn: variable dereferenced before check 'dc_dmub_srv' (see line 128)
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_is_hw_pwr_up() warn: variable dereferenced before check 'dc_dmub_srv' (see line 1164)
Fixes: 028bac5834 ("drm/amd/display: decouple dmcub execution to reduce lock granularity")
Fixes: 65138eb72e ("drm/amd/display: Add DCN35 DMUB")
Cc: JinZe.Xu <jinze.xu@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Josip Pavic <josip.pavic@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
VBIOS DMCUB firmware doesn't set the dal_fw bit and we end up hanging
waiting for HW power up done because of it.
[How]
Simplify the path and allow mailbox_rdy to be a functional check when
we detect VBIOS firmware.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The old asic only have 1 pwrseq hw.
We don't need to map the diginst to pwrseq inst in old asic.
[How]
1. Only mapping dig to pwrseq for new asic.
2. Move mapping function into dcn specific panel control component
Cc: Stable <stable@vger.kernel.org> # v6.6+
Cc: Mario Limonciello <mario.limonciello@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3122
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Lewis Huang <lewis.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Observe error message "Can't retrieve aconnector in hpd_rx_irq_offload_work"
when boot up with a mst tbt4 dock connected. After analyzing, there are few
parts needed to be adjusted:
1. hpd_rx_offload_wq[].aconnector is not initialzed before the dmub outbox
hpd_irq handler get registered which causes the error message.
2. registeration of hpd and hpd_rx_irq event for usb4 dp tunneling is not
aligned with legacy interface sequence
[How]
Put DMUB_NOTIFICATION_HPD and DMUB_NOTIFICATION_HPD_IRQ handler
registration into register_hpd_handlers() to align other interfaces and
get hpd_rx_offload_wq[].aconnector initialized earlier than that.
Leave DMUB_NOTIFICATION_AUX_REPLY registered as it was since we need that
while calling dc_link_detect(). USB4 connection status will be proactively
detected by dc_link_detect_connection_type() in amdgpu_dm_initialize_drm_device()
Cc: Stable <stable@vger.kernel.org>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function dcn32_build_wm_range_table call DC_FP_START/END. Drop the
unnecessary FPU guard.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of only asserting in the case of the SMU wait time is not what
we expect, add the SMU timeout check and try again.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The file rv1_clk_mgr_clk.c is not used and for this reason useless. Drop
the unnecessary file.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set a default value for target_div.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove break after return since it will never be reached.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the first if statement, we're checking if 'replay' is NULL. But in
the second if statement, we're not checking if 'replay' is NULL again
before calling replay->funcs->replay_set_power_opt().
if (replay == NULL && force_static)
return false;
...
if (link->replay_settings.replay_feature_enabled &&
replay->funcs->replay_set_power_opt) {
replay->funcs->replay_set_power_opt(replay, *power_opts, panel_inst);
link->replay_settings.replay_power_opt_active = *power_opts;
}
If 'replay' is NULL, this will cause a null pointer dereference.
Fixes the below found by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_edp_panel_control.c:895 edp_set_replay_allow_active() error: we previously assumed 'replay' could be null (see line 887)
Fixes: c7ddc0a800 ("drm/amd/display: Add Functions to enable Freesync Panel Replay")
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Suggested-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Summary:
* Revert some changes related to pixel encoding and clocks that cause
corruption
* IPS hang fix and FGCG enable by default for DCN35
* PSR-SU/Replay fixes
* Plane clip size change treated as medium update
* Fix for checking link alignment done during link training.
* HDMI compliance test fixes and other improvements
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
New worst-case measurement observed at 1897us.
[How]
Increase to 2000us to cover the new worst case + margin.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The dcn30_get_gamcor_current() function is responsible for determining
the current gamma correction mode used by the display controller.
However, the 'mode' variable, which stores the gamma correction mode,
was not initialized before its first usage, leading to an uninitialized
symbol error.
Thus initializes the 'mode' variable with a default value of LUT_BYPASS
before the conditional statements in the function, improves code clarity
and stability, ensuring correct behavior of the
dcn30_get_gamcor_current() function in determining the gamma correction
mode.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_dpp_cm.c:77 dpp30_get_gamcor_current() error: uninitialized symbol 'mode'.
Fixes: 03f54d7d34 ("drm/amd/display: Add DCN3 DPP")
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Roman Li <roman.li@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]:
issues fixed:
- comparison with wider integer type in loop condition which can cause
infinite loops
- pointer dereference before null check
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Sohaib Nadeem <sohaib.nadeem@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is a potential memory access violation while
iterating through array of dcn35 clks.
[How]
Limit iteration per array size.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The original picture aspect ratio in mode struct may have chance be
overwritten with wrong aspect ratio data in create_stream_for_sink().
It will create a different VIC output and cause HDMI compliance test
failed.
[How]
Preserve the original picture aspect ratio data during create the
stream.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As part of a cleanup amdgpu_dm_fini() function, which is typically
called when a device is being shut down or a driver is being unloaded
The below error message suggests that there is a potential null pointer
dereference issue with adev->dm.dc.
In the below, line of code where adev->dm.dc is used without a preceding
null check:
for (i = 0; i < adev->dm.dc->caps.max_links; i++) {
To fix this issue, add a null check for adev->dm.dc before this line.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:1959 amdgpu_dm_fini() error: we previously assumed 'adev->dm.dc' could be null (see line 1943)
Fixes: 006c26a0f1 ("drm/amd/display: Fix crash on device remove/driver unload")
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]:
This reverts commit 2ff33c759a.
The commit caused corruption when running some applications in fullscreen
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Sohaib Nadeem <sohaib.nadeem@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We Double-check link status if training successful,
but miss the lane align status.
[HOW]
Add the lane align status check
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when 'find_dcfclk_for_voltage()' function is looping over
VG_NUM_SOC_VOLTAGE_LEVELS (which is 8), but the size of the DcfClocks
array is VG_NUM_DCFCLK_DPM_LEVELS (which is 7).
When the loop variable i reaches 7, the function tries to access
clock_table->DcfClocks[7]. However, since the size of the DcfClocks
array is 7, the valid indices are 0 to 6. Index 7 is beyond the size of
the array, leading to a buffer overflow.
Reported by smatch & thus fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn301/vg_clk_mgr.c:550 find_dcfclk_for_voltage() error: buffer overflow 'clock_table->DcfClocks' 7 <= 7
Fixes: 3a83e4e64b ("drm/amd/display: Add dcn3.01 support to DC (v2)")
Cc: Roman Li <Roman.Li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'max_chunks_fbc_mode' is only declared and assigned a value under a
specific condition in the following lines:
if (data->fbc_en[i] == 1) {
max_chunks_fbc_mode = 128 - dmif_chunk_buff_margin;
}
If 'data->fbc_en[i]' is not equal to 1 for any i, max_chunks_fbc_mode
will not be initialized if it's used outside of this for loop.
Ensure that 'max_chunks_fbc_mode' is properly initialized before it's
used. Initialize it to a default value right after its declaration to
ensure that it gets a value assigned under all possible control flow
paths.
Thus fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dce_calcs.c:914 calculate_bandwidth() error: uninitialized symbol 'max_chunks_fbc_mode'.
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dce_calcs.c:917 calculate_bandwidth() error: uninitialized symbol 'max_chunks_fbc_mode'.
Fixes: 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
wait_time_microsec = max(wait_time_microsec, (uint32_t)
DPIA_CLK_SYNC_DELAY);
Above line is trying to assign the maximum value between
'wait_time_microsec' and 'DPIA_CLK_SYNC_DELAY' to wait_time_microsec.
However, 'wait_time_microsec' has not been assigned a value before this
line, initialize 'wait_time_microsec' at the point of declaration.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_training_dpia.c:697 dpia_training_eq_non_transparent() error: uninitialized symbol 'wait_time_microsec'.
Fixes: 630168a973 ("drm/amd/display: move dp link training logic to link_dp_training")
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These ANDs should be ORs or it will lead to a NULL dereference.
Fixes: fb5a3d0370 ("drm/amd/display: Add NULL test for 'timing generator' in 'dcn21_set_pipe()'")
Fixes: 886571d217 ("drm/amd/display: Fix 'panel_cntl' could be null in 'dcn21_set_backlight_level()'")
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We have observed that there are quite a number of PSR-SU panels on the
market that are unable to keep up with what user space throws at them,
resulting in hangs and random black screens. So, make damage clips
support configurable and disable it by default for PSR-SU displays.
Cc: stable@vger.kernel.org
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
A regression was identified with the change to add left edge pixel for
YCbCr422/420 + ODM combine cases.
This reverts commit 288c0254a0
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
New worst-case measurement observed at 1897us.
[How]
Increase to 2000us to cover the new worst case + margin.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Without acquiring DMCUB hw lock, a race condition is caused with
Panel Replay feature, which will trigger a hang. Indicate that a
lock is necessary to prevent this when replay feature is enabled.
[How]
To allow dmub hw lock on Replay.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
allow psr-su/replay for z8
Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The dcn30_get_gamcor_current() function is responsible for determining
the current gamma correction mode used by the display controller.
However, the 'mode' variable, which stores the gamma correction mode,
was not initialized before its first usage, leading to an uninitialized
symbol error.
Thus initializes the 'mode' variable with a default value of LUT_BYPASS
before the conditional statements in the function, improves code clarity
and stability, ensuring correct behavior of the
dcn30_get_gamcor_current() function in determining the gamma correction
mode.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_dpp_cm.c:77 dpp30_get_gamcor_current() error: uninitialized symbol 'mode'.
Fixes: 03f54d7d34 ("drm/amd/display: Add DCN3 DPP")
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Roman Li <roman.li@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Read modify write hazards can occur when using a single shared scratch
register between driver and firmware leading to driver accessing DCN
in IPS2 and a system hang.
[How]
Add infrastructure for using REGION6 as a shared firmware state between
driver and firmware. This region is uncachable.
Replace the existing get/set idle calls with reads/writes to the
(volatile) shared firmware state blocks that a separated by at least
a cache line between firmware and driver.
Remove the workarounds that required rewriting/checking read modify
write hazards.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]:
issues fixed:
- comparison with wider integer type in loop condition which can cause
infinite loops
- pointer dereference before null check
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Sohaib Nadeem <sohaib.nadeem@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is a potential memory access violation while
iterating through array of dcn35 clks.
[How]
Limit iteration per array size.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Need to fix some broken logic and sequencing in initial commit
[HOW]
Fix logic handling override deprogramming when exiting SQ128.
Don't exit early from dp_set_hw_lane_settings for DP2/FIXED_VS case.
Move LTTPR 128b/132b check out of requires_hwss and check during
runtime, as LTTPR caps are not populated on initial call.
Add pending_test_pattern to link state to allow HWSS to set FFE overrides
on retimer TX and/or skip setting APU TX FFE depending on requested pattern.
Use updated clock source for SQ128 override sequence.
Skip HW FFE preset programming when performing test pattern overrides.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
sw has most of the fgcg enabled which is the same as HW default.
but driver disabled some due to enable flag not initialized.
comparing HW state, we still need to enable dpp and dio.
Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When clip size is changed recout and viewport size would require an
update. When the update is clip size only current driver fails to
program the update into hardware.
[how]
Set a new clip_size_change flag when it is detected and set MED update
type and reprogram scaling params in next program pipe.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit f341055b10.
System hang observed, this commit is thought to be the
regression point.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The original picture aspect ratio in mode struct may have chance be
overwritten with wrong aspect ratio data in create_stream_for_sink().
It will create a different VIC output and cause HDMI compliance test
failed.
[How]
Preserve the original picture aspect ratio data during create the
stream.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As part of a cleanup amdgpu_dm_fini() function, which is typically
called when a device is being shut down or a driver is being unloaded
The below error message suggests that there is a potential null pointer
dereference issue with adev->dm.dc.
In the below, line of code where adev->dm.dc is used without a preceding
null check:
for (i = 0; i < adev->dm.dc->caps.max_links; i++) {
To fix this issue, add a null check for adev->dm.dc before this line.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:1959 amdgpu_dm_fini() error: we previously assumed 'adev->dm.dc' could be null (see line 1943)
Fixes: 006c26a0f1 ("drm/amd/display: Fix crash on device remove/driver unload")
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]:
This reverts commit 2ff33c759a.
The commit caused corruption when running some applications in fullscreen
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Sohaib Nadeem <sohaib.nadeem@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We Double-check link status if training successful,
but miss the lane align status.
[HOW]
Add the lane align status check
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, if the abmlevel module parameter is set, it is possible for
user space to override the ABM level at some point after boot. However,
that is undesirable because it means that we aren't respecting the
user's wishes with regard to the level that they want to use. So,
prevent user space from changing the ABM level if the module parameter
is set to a non-auto value.
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since 'adev->dm.dc' in amdgpu_dm_fini() might turn out to be NULL
before the call to dc_enable_dmub_notifications(), check
beforehand to ensure there will not be a possible NULL-ptr-deref
there.
Also, since commit 1e88eb1b2c ("drm/amd/display: Drop
CONFIG_DRM_AMD_DC_HDCP") there are two separate checks for NULL in
'adev->dm.dc' before dc_deinit_callbacks() and dc_dmub_srv_destroy().
Clean up by combining them all under one 'if'.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 81927e2808 ("drm/amd/display: Support for DMUB AUX")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when 'find_dcfclk_for_voltage()' function is looping over
VG_NUM_SOC_VOLTAGE_LEVELS (which is 8), but the size of the DcfClocks
array is VG_NUM_DCFCLK_DPM_LEVELS (which is 7).
When the loop variable i reaches 7, the function tries to access
clock_table->DcfClocks[7]. However, since the size of the DcfClocks
array is 7, the valid indices are 0 to 6. Index 7 is beyond the size of
the array, leading to a buffer overflow.
Reported by smatch & thus fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn301/vg_clk_mgr.c:550 find_dcfclk_for_voltage() error: buffer overflow 'clock_table->DcfClocks' 7 <= 7
Fixes: 3a83e4e64b ("drm/amd/display: Add dcn3.01 support to DC (v2)")
Cc: Roman Li <Roman.Li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'max_chunks_fbc_mode' is only declared and assigned a value under a
specific condition in the following lines:
if (data->fbc_en[i] == 1) {
max_chunks_fbc_mode = 128 - dmif_chunk_buff_margin;
}
If 'data->fbc_en[i]' is not equal to 1 for any i, max_chunks_fbc_mode
will not be initialized if it's used outside of this for loop.
Ensure that 'max_chunks_fbc_mode' is properly initialized before it's
used. Initialize it to a default value right after its declaration to
ensure that it gets a value assigned under all possible control flow
paths.
Thus fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dce_calcs.c:914 calculate_bandwidth() error: uninitialized symbol 'max_chunks_fbc_mode'.
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dce_calcs.c:917 calculate_bandwidth() error: uninitialized symbol 'max_chunks_fbc_mode'.
Fixes: 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
wait_time_microsec = max(wait_time_microsec, (uint32_t)
DPIA_CLK_SYNC_DELAY);
Above line is trying to assign the maximum value between
'wait_time_microsec' and 'DPIA_CLK_SYNC_DELAY' to wait_time_microsec.
However, 'wait_time_microsec' has not been assigned a value before this
line, initialize 'wait_time_microsec' at the point of declaration.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_training_dpia.c:697 dpia_training_eq_non_transparent() error: uninitialized symbol 'wait_time_microsec'.
Fixes: 630168a973 ("drm/amd/display: move dp link training logic to link_dp_training")
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These ANDs should be ORs or it will lead to a NULL dereference.
Fixes: fb5a3d0370 ("drm/amd/display: Add NULL test for 'timing generator' in 'dcn21_set_pipe()'")
Fixes: 886571d217 ("drm/amd/display: Fix 'panel_cntl' could be null in 'dcn21_set_backlight_level()'")
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We have observed that there are quite a number of PSR-SU panels on the
market that are unable to keep up with what user space throws at them,
resulting in hangs and random black screens. So, make damage clips
support configurable and disable it by default for PSR-SU displays.
Cc: stable@vger.kernel.org
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'stream_enc_regs' array is an array of dcn10_stream_enc_registers
structures. The array is initialized with four elements, corresponding
to the four calls to stream_enc_regs() in the array initializer. This
means that valid indices for this array are 0, 1, 2, and 3.
The error message 'stream_enc_regs' 4 <= 5 below, is indicating that
there is an attempt to access this array with an index of 5, which is
out of bounds. This could lead to undefined behavior
Here, eng_id is used as an index to access the stream_enc_regs array. If
eng_id is 5, this would result in an out-of-bounds access on the
stream_enc_regs array.
Thus fixing Buffer overflow error in dcn301_stream_encoder_create
reported by Smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn301/dcn301_resource.c:1011 dcn301_stream_encoder_create() error: buffer overflow 'stream_enc_regs' 4 <= 5
Fixes: 3a83e4e64b ("drm/amd/display: Add dcn3.01 support to DC (v2)")
Cc: Roman Li <Roman.Li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After a recent change in LLVM, allmodconfig (which has CONFIG_KCSAN=y
and CONFIG_WERROR=y enabled) has a few new instances of
-Wframe-larger-than for the mode support and system configuration
functions:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/display_mode_vba_20v2.c:3393:6: error: stack frame size (2144) exceeds limit (2048) in 'dml20v2_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
3393 | void dml20v2_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
| ^
1 error generated.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn21/display_mode_vba_21.c:3520:6: error: stack frame size (2192) exceeds limit (2048) in 'dml21_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
3520 | void dml21_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
| ^
1 error generated.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/display_mode_vba_20.c:3286:6: error: stack frame size (2128) exceeds limit (2048) in 'dml20_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
3286 | void dml20_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
| ^
1 error generated.
Without the sanitizers enabled, there are no warnings.
This was the catalyst for commit 6740ec97bc ("drm/amd/display:
Increase frame warning limit with KASAN or KCSAN in dml2") and that same
change was made to dml in commit 5b750b2253 ("drm/amd/display:
Increase frame warning limit with KASAN or KCSAN in dml") but the
frame_warn_flag variable was not applied to all files. Do so now to
clear up the warnings and make all these files consistent.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issue/1990
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When dc_state_destruct() was refactored the new phantom_stream_count
and phantom_plane_count members weren't cleared.
Fixes: 012a04b1d6 ("drm/amd/display: Refactor phantom resource allocation")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just ensure that ODM optimization is disabled by default.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously we would call apply_ctx_to_hw to enable and disable
phantom pipes. However, apply_ctx_to_hw can potentially update
non-phantom pipes as well which is undesired. Instead of calling
apply_ctx_to_hw as a whole, call the relevant helpers for each
phantom pipe when enabling / disabling which will avoid us modifying
hardware state for non-phantom pipes unknowingly.
The use case is for an FRL display where FRL_Update is requested
by the display. In this case link_state_valid flag is cleared in
a passive callback thread and should be handled in the next stream /
link update. However, due to the call to apply_ctx_to_hw for the
phantom pipes during a flip, the main pipes were modified outside
of the desired sequence (driver does not handle link_state_valid = 0
on flips).
Cc: stable@vger.kernel.org # 6.6+
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To match firmware measurements and avoid hanging when accessing HW
that's in idle.
[How]
Increase the delays to what we've measured.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When populating dml pipes, odm combine policy should be assigned based
on the pipe topology of the context passed in. DML pipes could be
repopulated multiple times during single validate bandwidth attempt. We
need to make sure that whenever we repopulate the dml pipes it is always
aligned with the updated context. There is a case where DML pipes get
repopulated during FPO optimization after ODM combine policy is changed.
Since in the current code we reinitlaize ODM combine policy, even though
the current context has ODM combine enabled, we overwrite it despite the
pipes are already split. This causes DML to think that MPC combine is
used so we mistakenly enable MPC combine because we apply pipe split
with ODM combine policy reset. This issue doesn't impact non windowed
MPO with ODM case because the legacy policy has restricted use cases. We
don't encounter the case where both ODM and FPO optimizations are
enabled together. So we decide to leave it as is because it is about to
be replaced anyway.
Cc: stable@vger.kernel.org # 6.6+
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In "u32 otg_inst = pipe_ctx->stream_res.tg->inst;"
pipe_ctx->stream_res.tg could be NULL, it is relying on the caller to
ensure the tg is not NULL.
Fixes: 474ac4a875 ("drm/amd/display: Implement some asic specific abm call backs.")
Cc: Yongqiang Sun <yongqiang.sun@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'panel_cntl' structure used to control the display panel could be null,
dereferencing it could lead to a null pointer access.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn21/dcn21_hwseq.c:269 dcn21_set_backlight_level() error: we previously assumed 'panel_cntl' could be null (see line 250)
Fixes: 474ac4a875 ("drm/amd/display: Implement some asic specific abm call backs.")
Cc: Yongqiang Sun <yongqiang.sun@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'stream_enc_regs' array is an array of dcn10_stream_enc_registers
structures. The array is initialized with four elements, corresponding
to the four calls to stream_enc_regs() in the array initializer. This
means that valid indices for this array are 0, 1, 2, and 3.
The error message 'stream_enc_regs' 4 <= 5 below, is indicating that
there is an attempt to access this array with an index of 5, which is
out of bounds. This could lead to undefined behavior
Here, eng_id is used as an index to access the stream_enc_regs array. If
eng_id is 5, this would result in an out-of-bounds access on the
stream_enc_regs array.
Thus fixing Buffer overflow error in dcn301_stream_encoder_create
reported by Smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn301/dcn301_resource.c:1011 dcn301_stream_encoder_create() error: buffer overflow 'stream_enc_regs' 4 <= 5
Fixes: 3a83e4e64b ("drm/amd/display: Add dcn3.01 support to DC (v2)")
Cc: Roman Li <Roman.Li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After a recent change in LLVM, allmodconfig (which has CONFIG_KCSAN=y
and CONFIG_WERROR=y enabled) has a few new instances of
-Wframe-larger-than for the mode support and system configuration
functions:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/display_mode_vba_20v2.c:3393:6: error: stack frame size (2144) exceeds limit (2048) in 'dml20v2_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
3393 | void dml20v2_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
| ^
1 error generated.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn21/display_mode_vba_21.c:3520:6: error: stack frame size (2192) exceeds limit (2048) in 'dml21_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
3520 | void dml21_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
| ^
1 error generated.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/display_mode_vba_20.c:3286:6: error: stack frame size (2128) exceeds limit (2048) in 'dml20_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
3286 | void dml20_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
| ^
1 error generated.
Without the sanitizers enabled, there are no warnings.
This was the catalyst for commit 6740ec97bc ("drm/amd/display:
Increase frame warning limit with KASAN or KCSAN in dml2") and that same
change was made to dml in commit 5b750b2253 ("drm/amd/display:
Increase frame warning limit with KASAN or KCSAN in dml") but the
frame_warn_flag variable was not applied to all files. Do so now to
clear up the warnings and make all these files consistent.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issue/1990
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When dc_state_destruct() was refactored the new phantom_stream_count
and phantom_plane_count members weren't cleared.
Fixes: 012a04b1d6 ("drm/amd/display: Refactor phantom resource allocation")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
./drivers/gpu/drm/amd/display/dc/dml2/dml2_utils.c:236:49-51: WARNING !A || A && B is equivalent to !A || B.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8169
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some of the CONFIG_DRM_AMD_DC_FP was added in some non-related FPU code,
which may cause confusion. This commit dropped some of the unnecessary
guards.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just adjust the code indentation in the header and add a simple comment
in the dm_cp_psp file.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just ensure that ODM optimization is disabled by default.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Display code keeps getting improvements, and because of that, some
legacy code is left behind. This commit drops some of those unused
codes.
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously we would call apply_ctx_to_hw to enable and disable
phantom pipes. However, apply_ctx_to_hw can potentially update
non-phantom pipes as well which is undesired. Instead of calling
apply_ctx_to_hw as a whole, call the relevant helpers for each
phantom pipe when enabling / disabling which will avoid us modifying
hardware state for non-phantom pipes unknowingly.
The use case is for an FRL display where FRL_Update is requested
by the display. In this case link_state_valid flag is cleared in
a passive callback thread and should be handled in the next stream /
link update. However, due to the call to apply_ctx_to_hw for the
phantom pipes during a flip, the main pipes were modified outside
of the desired sequence (driver does not handle link_state_valid = 0
on flips).
Cc: stable@vger.kernel.org # 6.6+
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 6b2b782ad6.
Since, it was causing regression for some DRR scenarios.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the p_state type before update_clocks is called to ensure
accurate values are used for logging.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Ethan Bitnun <etbitnun@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a small delay before reading clks from hw, to ensure correct values
are used for logging.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Ethan Bitnun <etbitnun@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
0 nits is a valid default value for OLED panels. So, update the relevant
comment to account for that fact.
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Signed-off-by: Camille Cho <camille.cho@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently 3-tap chroma subsampling is used for YCbCr422/420. When ODM
pipesplit is used, pixels on the left edge of ODM slices need one extra
pixel from the right edge of the previous slice to calculate the correct
chroma value.
Without this change, the chroma value is slightly different than
expected. This is usually imperceptible visually, but it impacts test
pattern CRCs for compliance test automation.
[How]
Update logic to use the register for adding extra left edge pixel for
YCbCr422/420 ODM cases.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Default driver behaviour is 3-tap subsampling, so we should keep
it the same for test patterns as well. However, it is also useful
to force 1-tap subsampling for testing purposes.
Reviewed-by: Michael Strauss <michael.strauss@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Workaroud for a race condition where DMCUB is in the process of
committing to IPS1 during the handshake causing us to miss the
transition into IPS2 and touch the INBOX1 RPTR causing a HW hang.
[How]
Disable the reallow to ensure that we have enough of a gap between entry
and exit and we're not seeing back-to-back wake_and_executes.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To match firmware measurements and avoid hanging when accessing HW
that's in idle.
[How]
Increase the delays to what we've measured.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We're still missing a few and we'd like to avoid continuining when
a hang occurs for debug purposes.
[How]
Add the loop anywhere we try to wait on rptr == wptr in dc_dmub_srv.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Any interface that touches registers needs to wake up the system.
[How]
Add a new interface dc_exit_ips_for_hw_access that wraps the check
for IPS support and insert it into the public DC interfaces that
touch registers.
We don't re-enter, since we expect that the enter/exit to have been done
on the DM side.
Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Hardware register definition changed
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Allen Pan <allen.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When populating dml pipes, odm combine policy should be assigned based
on the pipe topology of the context passed in. DML pipes could be
repopulated multiple times during single validate bandwidth attempt. We
need to make sure that whenever we repopulate the dml pipes it is always
aligned with the updated context. There is a case where DML pipes get
repopulated during FPO optimization after ODM combine policy is changed.
Since in the current code we reinitlaize ODM combine policy, even though
the current context has ODM combine enabled, we overwrite it despite the
pipes are already split. This causes DML to think that MPC combine is
used so we mistakenly enable MPC combine because we apply pipe split
with ODM combine policy reset. This issue doesn't impact non windowed
MPO with ODM case because the legacy policy has restricted use cases. We
don't encounter the case where both ODM and FPO optimizations are
enabled together. So we decide to leave it as is because it is about to
be replaced anyway.
Cc: stable@vger.kernel.org # 6.6+
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Only required if FIXED_VS retimer does not support DP2-capable.
[HOW]
Gate link rate toggle with DP 128b/132b LTTPR channel coding cap check.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The New sequence has been in use in DCN314 with no regressions
introduced. Therefore, it is safe to enable this sequence for all
devices using FIXED_VS retimers. So, remove the legacy codepath and its
associated config flag.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We want programs besides the compositor to be able to enable or disable
panel power saving features. However, since they are currently only
configurable through DRM properties, that isn't possible. So, to remedy
that issue introduce a new "panel_power_savings" sysfs attribute.
v2: squash in fix from Hamza (Alex)
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In "u32 otg_inst = pipe_ctx->stream_res.tg->inst;"
pipe_ctx->stream_res.tg could be NULL, it is relying on the caller to
ensure the tg is not NULL.
Fixes: 474ac4a875 ("drm/amd/display: Implement some asic specific abm call backs.")
Cc: Yongqiang Sun <yongqiang.sun@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'panel_cntl' structure used to control the display panel could be null,
dereferencing it could lead to a null pointer access.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn21/dcn21_hwseq.c:269 dcn21_set_backlight_level() error: we previously assumed 'panel_cntl' could be null (see line 250)
Fixes: 474ac4a875 ("drm/amd/display: Implement some asic specific abm call backs.")
Cc: Yongqiang Sun <yongqiang.sun@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The error message buffer overflow 'dc->links' 12 <= 12 suggests that the
code is trying to access an element of the dc->links array that is
beyond its bounds. In C, arrays are zero-indexed, so an array with 12
elements has valid indices from 0 to 11. Trying to access dc->links[12]
would be an attempt to access the 13th element of a 12-element array,
which is a buffer overflow.
To fix this, ensure that the loop does not go beyond the last valid
index when accessing dc->links[i + 1] by subtracting 1 from the loop
condition.
This would ensure that i + 1 is always a valid index in the array.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_dpia_bw.c:208 get_host_router_total_dp_tunnel_bw() error: buffer overflow 'dc->links' 12 <= 12
Fixes: 59f1622a5f ("drm/amd/display: Add dpia display mode validation logic")
Cc: PeiChen Huang <peichen.huang@amd.com>
Cc: Aric Cyr <aric.cyr@amd.com>
Cc: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a NULL check for the kzalloc call that allocates memory for
dummy_updates in the amdgpu_dm_atomic_commit_tail function. Previously,
if kzalloc failed to allocate memory and returned NULL, the code would
attempt to use the NULL pointer.
The fix is to check if kzalloc returns NULL, and if so, log an error
message and skip the rest of the current loop iteration with the
continue statement. This prevents the code from attempting to use the
NULL pointer.
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202401300629.ICnCt983-lkp@intel.com/
Fixes: 135fd1b356 ("drm/amd/display: Reduce stack size")
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
odm calculation is missing for pipe split policy determination
and cause Underflow/Corruption issue.
[how]
Add the odm calculation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On 14us for exit latency time causes underflow for 8K monitor with HDR on.
Increasing the latency to 28us fixes the underflow.
[How]
Increase the latency to 28us. This workaround should be sufficient
before we figure out why SR exit so long.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
MAX_SURFACES is per stream, while MAX_PLANES is per asic. The
mpc_combine is an array that records all the planes per asic. Therefore
MAX_PLANES should be used as the array size. Using MAX_SURFACES causes
array overflow when there are more than 3 planes.
[how]
Use the MAX_PLANES for the mpc_combine array size.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Secondary DP2 display fails to light up in some instances
[How]
Clock needs to be on when DPSTREAMCLK*_EN =1. This change
moves dtbclk_p enable/disable point to make sure this is
the case
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
BIOS's integration info table not following the original order
which is phy instance is ext_displaypath's array index.
[how]
Move them to follow the original order.
Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Originally, PMFW said min FCLK is 300Mhz, but min DCFCLK can be increased
to 400Mhz because min FCLK is now 600Mhz so FCLK >= 1.5 * DCFCLK hardware
requirement will still be satisfied. Increasing min DCFCLK addresses
underflow issues (underflow occurs when phantom pipe is turned on for some
Sub-Viewport configs).
[how]
Increasing DCFCLK by raising the min_dcfclk_mhz
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Sohaib Nadeem <sohaib.nadeem@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Revert commit 885c71ad79
("drm/amd/display: initialize all the dpm level's stutter latency")
Because it causes some regression
Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The error message buffer overflow 'dc->links' 12 <= 12 suggests that the
code is trying to access an element of the dc->links array that is
beyond its bounds. In C, arrays are zero-indexed, so an array with 12
elements has valid indices from 0 to 11. Trying to access dc->links[12]
would be an attempt to access the 13th element of a 12-element array,
which is a buffer overflow.
To fix this, ensure that the loop does not go beyond the last valid
index when accessing dc->links[i + 1] by subtracting 1 from the loop
condition.
This would ensure that i + 1 is always a valid index in the array.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_dpia_bw.c:208 get_host_router_total_dp_tunnel_bw() error: buffer overflow 'dc->links' 12 <= 12
Fixes: 59f1622a5f ("drm/amd/display: Add dpia display mode validation logic")
Cc: PeiChen Huang <peichen.huang@amd.com>
Cc: Aric Cyr <aric.cyr@amd.com>
Cc: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a NULL check for the kzalloc call that allocates memory for
dummy_updates in the amdgpu_dm_atomic_commit_tail function. Previously,
if kzalloc failed to allocate memory and returned NULL, the code would
attempt to use the NULL pointer.
The fix is to check if kzalloc returns NULL, and if so, log an error
message and skip the rest of the current loop iteration with the
continue statement. This prevents the code from attempting to use the
NULL pointer.
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202401300629.ICnCt983-lkp@intel.com/
Fixes: 135fd1b356 ("drm/amd/display: Reduce stack size")
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add control flag for IPS residency profiling
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There exists scenarios where the split index for subvp can be
pipe index 0. The assumption in FW is that the split index
won't be 0 but this is incorrect.
[how]
Instead populate non-split cases to be 0xF to differentiate
between split and non-split.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
odm calculation is missing for pipe split policy determination
and cause Underflow/Corruption issue.
[how]
Add the odm calculation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
To Remove warnings of clk_mgr.
[How]
Added code to remove warnings by resolving redefinations.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Mounika Adhuri <moadhuri@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Audio channel layout for 5.1ch is not correct
[how]
Add the audio layout for 5.1ch (channel_count = 6).
Add divided by zero check.
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On 14us for exit latency time causes underflow for 8K monitor with HDR on.
Increasing the latency to 28us fixes the underflow.
[How]
Increase the latency to 28us. This workaround should be sufficient
before we figure out why SR exit so long.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In current code, we recognize a pipe as a phantom pipe if it references
the same phantom stream. However it can also a phantom split pipe.
If the phantom split pipe has a smaller pipe index than the phantom pipe
we will mistakenly use the phantom split pipe as the phantom pipe. This
causes an incorrect subvp configuration where the first half of the
screen is flashing solid white image.
[how]
Add additional check that the pipe needs to be an OTG master pipe.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
MAX_SURFACES is per stream, while MAX_PLANES is per asic. The
mpc_combine is an array that records all the planes per asic. Therefore
MAX_PLANES should be used as the array size. Using MAX_SURFACES causes
array overflow when there are more than 3 planes.
[how]
Use the MAX_PLANES for the mpc_combine array size.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Secondary DP2 display fails to light up in some instances
[How]
Clock needs to be on when DPSTREAMCLK*_EN =1. This change
moves dtbclk_p enable/disable point to make sure this is
the case
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Unguarded SMU and CLK IP access cause issue on FPGA
[How]
Guard them for FPGA environment
Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Eric Yang <eric.yang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
1. To watch dmcub inbox1 ring buffer cmd type without tools
2. dmub_cmd_PLAT_54186_wa 66 bytes
[How]
Added dmcub cmd type enum: unsigned char for debug use only,
also fixed 66 bytes issue by using unsigned int in bit
define instead of unsigned char.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Fudongwang <fudong.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previous patch to allow DTBCLK disable didn't address boot case. Driver
thinks DTBCLK is disabled by default, so we don't send disable message to
PMFW. DTBCLK is then enabled at idle desktop on boot, burning power.
[How]
Set dtbclk_en to true on boot so that disable message is sent during first
commit.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
BIOS's integration info table not following the original order
which is phy instance is ext_displaypath's array index.
[how]
Move them to follow the original order.
Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
fix reading edp rx crc timeout failure. after
bootup, kernel setup psr with dpcd 0x170 = 5. this
notify rx psr enable and let rx fw start checking crc
for fw internal logic. rx fw may not update crc read
count within dpcd 0x246. read count is always 0. this
will lead tx crc reading timeout.
[How]
add debugfs to let test app to disbable rx crc
checking for rx internal logic. then test app can read
rx crc dpcd 0x246 successfully.
expected app sequence is as below:
1. disable eDP PHY and notify eDP rx with dpcd 0x600 = 2.
2. echo 0x1 /sys/kernel/debug/dri/0/eDP-X/disallow_edp_enter_psr
3. enable eDP PHY and notify eDP rx with dpcd 0x600 = 1 but
without dpcd 0x170 = 5.
4. read crc from rx dpcd 0x270, 0x246, etc.
5. echo 0x0 /sys/kernel/debug/dri/0/eDP-X/disallow_edp_enter_psr.
this will let eDP back to normal with psr setup dpcd 0x170 = 5.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
For FPO and SubVP/DRR cases we need to ensure to program
OTG_V_TOTAL_MIN/MAX_SEL, otherwise stretching the vblank
in FPO / SubVP / DRR cases will not have any effect
and we could hit underflow / corruption.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There is only a single call to dc_post_update_surfaces_to_stream
so there is no need to have two flags to control it. Unifying
this to a single flag allows dc_stream_adjust_vmin_vmax to skip
actual programming when there is no change required.
[how]
Remove wm_optimze_required flag and set only optimize_required in its
place. Then in dc_stream_adjust_vmin_vmax, check that the stream timing
range matches the requested one and skip programming if they are equal.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Originally, PMFW said min FCLK is 300Mhz, but min DCFCLK can be increased
to 400Mhz because min FCLK is now 600Mhz so FCLK >= 1.5 * DCFCLK hardware
requirement will still be satisfied. Increasing min DCFCLK addresses
underflow issues (underflow occurs when phantom pipe is turned on for some
Sub-Viewport configs).
[how]
Increasing DCFCLK by raising the min_dcfclk_mhz
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Sohaib Nadeem <sohaib.nadeem@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Otherwise we can send commands too early and they don't execute until
the next command is sent.
[How]
Check the extra status bit when polling for HW powered up.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want acknowledgment of the driver idle disallow from DMCUB before
continuing with any further programming.
For idle allow we want to minimize the chance of DMCUB actively
interacing with other firmware components on the system (eg. PMFW)
at the same time.
[How]
Ensure that DMCUB isn't in the middle of processing other command
submissions prior to allowing idle and after disallowing idle by
inserting a wait before the allow and by changing the wait type for
the idle disallow.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Revert commit 885c71ad79
("drm/amd/display: initialize all the dpm level's stutter latency")
Because it causes some regression
Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The static screen event mask definition is different
betwnn DCN31 after and before.
[how]
Rename DCN30_set_static_screen_control to DCN31.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Yiling Chen <yi-ling.chen2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds a contribution list for display under the kernel
documentation with some first suggestions. It also drops an old TODO
list from the display folder.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce OPP as part of the kernel documentation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds a kernel-doc entry for the MPC block. Since it enabled
the kernel-doc to parse some of the documentation in the mpc.h file,
fixing some of the comments was required.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit introduces basic DPP information and the struct scan for
code documentation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The 'stream' pointer is used in dcn10_set_output_transfer_func() before
the check if 'stream' is NULL.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn10/dcn10_hwseq.c:1892 dcn10_set_output_transfer_func() warn: variable dereferenced before check 'stream' (see line 1875)
Fixes: ddef02de0d ("drm/amd/display: add null checks before logging")
Cc: Wyatt Wood <wyatt.wood@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable the documentation to extract code documentation from dchubbub.h
file.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create the HUBP documentation page and add the doc references to extract
the HUBP code documentation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
IPS was temporary disabled due to instability.
It was fixed in dmub firmware and with:
- "drm/amd/display: Add IPS checks before dcn register access"
- "drm/amd/display: Disable ips before dc interrupt setting"
[How]
Enable IPS by default.
Disable IPS if 0x800 bit set in amdgpu.dcdebugmask module params
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
While in IPS2 an access to dcn registers is not allowed.
If interrupt results in dc call, we should disable IPS.
[How]
Safeguard register access in IPS2 by disabling idle optimization
before calling dc interrupt setting api.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Because ABM will wait VStart to start getting histogram data,
it will cause we can't enter IPS while full screnn video playing.
[How]
Modify the panel refresh rate to the maximun multiple of current
refresh rate.
Reviewed-by: Dennis Chan <dennis.chan@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: ChunTao Tso <chuntao.tso@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
With IPS enabled a system hangs once PSR is active.
PSR active triggers transition to IPS2 state.
While in IPS2 an access to dcn registers results in hard hang.
Existing check doesn't cover for PSR sequence.
[How]
Safeguard register access by disabling idle optimization in atomic commit
and crtc scanout. It will be re-enabled on next vblank.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Introduce a new Replay mode for DMUB version 0.0.199.0
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add regkey to block video playback in IPS2 by default
Allow idle optimizations in the same spot we allow Replay for
video playback usecases.
Avoid sending it when there's an external display connected by
modifying the allow idle checks to check for active non-eDP screens.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The 'status' variable in 'core_link_read_dpcd()' &
'core_link_write_dpcd()' was uninitialized.
Thus, initializing 'status' variable to 'DC_ERROR_UNEXPECTED' by default.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:226 core_link_read_dpcd() error: uninitialized symbol 'status'.
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:248 core_link_write_dpcd() error: uninitialized symbol 'status'.
Cc: stable@vger.kernel.org
Cc: Jerry Zuo <jerry.zuo@amd.com>
Cc: Jun Lei <Jun.Lei@amd.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
IPS was temporary disabled due to instability.
It was fixed in dmub firmware and with:
- "drm/amd/display: Add IPS checks before dcn register access"
- "drm/amd/display: Disable ips before dc interrupt setting"
[How]
Enable IPS by default.
Disable IPS if 0x800 bit set in amdgpu.dcdebugmask module params
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
While in IPS2 an access to dcn registers is not allowed.
If interrupt results in dc call, we should disable IPS.
[How]
Safeguard register access in IPS2 by disabling idle optimization
before calling dc interrupt setting api.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tell snprintf() to store at most 10 bytes in the output buffer
instead of 30.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:1508 dp_dsc_clock_en_read() error: snprintf() is printing too much 30 vs 10
Fixes: c06e09b766 ("drm/amd/display: Add DSC parameters logging to debugfs")
Cc: Alex Hung <alex.hung@amd.com>
Cc: Qingqing Zhuo <qingqing.zhuo@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Color caps changed between HW versions, which caused the DCN10 color
state sections in the DTN log to no longer match DCN2+ state. Create a
color state log specific to DCN2.0 and hook it up to DCN2 family
drivers. Instead of reading gamut remap reg values, display gamut remap
matrix data in fixed 31.32.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add color caps information for DPP and MPC block to show HW color caps.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_crtc.c💯 warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* The DRM vblank counter enable/disable action is used as the trigger
to enable
Cc: Sun peng Li <sunpeng.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Color caps changed between HW versions, which caused the DCN10 color
state sections in the DTN log to no longer match DCN3+ state. Create a
color state log specific to DCN3.0 and hook it up to DCN3.0+ and DCN3.1+
drivers.
rfc-v2:
- detail RAM mode for gamcor and blnd gamma blocks
- add MPC gamut remap matrix log
v3:
- read MPC gamut remap matrix in fixed 31.32 format
- extend to DCN3.0+ and DCN3.1+ drivers (Harry)
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- FW Release 0.0.201.0
- Fix resizing video window for dcn321
- Fix timing bandwidth calculation for HDMI
- Fix null-deref in dml2 assigned pipe search
- Add GART memory support for dmcub
- Add power_state and pme_pending flag
- Add usb4_bw_alloc_support flag
- Revert "Rework DC Z10 restore
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add debug flag for Replay IPS visual confirm
- Remove unused debug flags that should not
be controlled inside Replay FSM
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Because ABM will wait VStart to start getting histogram data,
it will cause we can't enter IPS while full screnn video playing.
[How]
Modify the panel refresh rate to the maximun multiple of current
refresh rate.
Reviewed-by: Dennis Chan <dennis.chan@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: ChunTao Tso <chuntao.tso@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
It has been found a regression caused by enabling this feature during ODM to
MPC combine switch when user is resizing video window. The transition is
only needed when the feature is enabled. During the transition driver will
temporary switch to use max dppclk level through SMU set hard min interface.
The interface times out and fail to configure the max dpp clock level, which caused
system issue as the desired clock can't be set. We will continue investigating
the issue and root cause the issue where max dppclk level can't be reached.
But for now we have to disable this feature as this feature will cause us to hit this
problem in common use cases during video playback unfortunately. The issue
is dcn321 specific so it won't impact other dcn revisions.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In dump file, GART memory can be accessed while frame buffer cannot.
[How]
Add GART memory support for dmcub.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Fudongwang <fudong.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit e6f82bd44b.
It caused intermittent hangs when enabling IPS on static screen.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[what]
Adding power_state to dc.h and pme_pending flag to clk_mgr_internal.h
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
With IPS enabled a system hangs once PSR is active.
PSR active triggers transition to IPS2 state.
While in IPS2 an access to dcn registers results in hard hang.
Existing check doesn't cover for PSR sequence.
[How]
Safeguard register access by disabling idle optimization in atomic commit
and crtc scanout. It will be re-enabled on next vblank.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dc should have a flag for DM to enable usb4_bw_alloc in dptx
[How]
- Add usb4_bw_alloc_support flag in dc_config
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Peichen Huang <peichen.huang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Logging DCN3 MPC state was following DCN1 implementation that doesn't
consider new DCN3 MPC color blocks. Create new elements according to
DCN3 MPC color caps and a new DCN3-specific function for reading MPC
data.
v3:
- remove gamut remap reg reading in favor of fixed31_32 matrix data
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why && How]
The current bandwidth calculation for timing doesn't account for
certain HDMI modes overhead which leads to DSC can't be enabled.
Add support to calculate the actual bandwidth for these HDMI modes.
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We want to be able to read the MPC's gamut remap matrix similar to
what we do with .dpp_get_gamut_remap functions. On the other hand, we
don't need a hook here because only DCN3+ has the MPC gamut remap
block, being absent in previous families.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCN3 DPP color state was uncollected and some state elements from DCN1
doesn't fit DCN3. Create new elements according to DCN3 color caps and
fill them up for DTN log output.
rfc-v2:
- fix reading of gamcor and blnd gamma states
- remove gamut remap register in favor of gamut remap matrix reading
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of read gamut remap data from hw values, convert HW register
values (S2D13) into a fixed-point 31.32 matrix for color state log.
Change DCN10 log to print data in the format of the gamut remap matrix.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We want to be able to read the DPP's gamut remap matrix.
v2:
- code-style and doc comments clean-up (Melissa)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prepare to hook up color state log according to the DCN version.
v3:
- put functions in single line (Siqueira)
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The 'status' variable in 'core_link_read_dpcd()' &
'core_link_write_dpcd()' was uninitialized.
Thus, initializing 'status' variable to 'DC_ERROR_UNEXPECTED' by default.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:226 core_link_read_dpcd() error: uninitialized symbol 'status'.
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:248 core_link_write_dpcd() error: uninitialized symbol 'status'.
Cc: stable@vger.kernel.org
Cc: Jerry Zuo <jerry.zuo@amd.com>
Cc: Jun Lei <Jun.Lei@amd.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the below gcc with W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_replay.c:262: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Set REPLAY power optimization flags and coasting vtotal.
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_replay.c:284: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* send Replay general cmd to DMUB.
Fixes: e379787cbc ("drm/amd/display: Add some functions for Panel Replay")
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu:
- DSC fixes
- DC resource pool fixes
- OTG fix
- DML2 fixes
- Aux fix
- GFX10 RLC firmware handling fix
- Revert a broken workaround for SMU 13.0.2
- DC writeback fix
- Enable gfxoff when ROCm apps are active on gfx11 with the proper FW version
amdkfd:
- Fix dma-buf exports using GEM handles
nouveau:
- fix a unneeded WARN_ON triggering
xe:
- Fix for definition of wakeref_t
- Fix for an error code aliasing
- Fix for VM_UNBIND_ALL in the case there are no bound VMAs
- Fixes for a number of __iomem address space mismatches reported by sparse
- Fixes for the assignment of exec_queue priority
- A Fix for skip_guc_pc not taking effect
- Workaround for a build problem on GCC 11
- A couple of fixes for error paths
- Fix a Flat CCS compression metadata copy issue
- Fix a misplace array bounds checking
- Don't have display support depend on EXPERT (as discussed on IRC)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmWqGdoACgkQDHTzWXnE
hr5tiA//ZIos/mK+70JprAhJkXN/Lo5IDBOsldDQ1BkakkVLU1taHIsrER6iDT8g
WmDzuC4ZIkHZyJ1V8zcIZ4wjE+sIOUeje0fSuMRgwPD+rrdn3WjUiAuvofuxQ5fD
LFW+O/9hzTl3xBoxidPdupf33WGRMAKhNuYvhwfH14LaqNDVVdAHU7MPTORmFsyY
CbCOLze5dwAmlB4rk+LDsO0gFtXjB7/Ewg2vHUzlEmaYmPpRxu9MHCpadQGq2Sal
nwxwI5lb8DqR8jbel3pA0/kz06EdSKKr20YTdw+RVrp/tPqDq4njkZfJMPK+2VYf
VpSPnGJOvvdtehCrKBBOBK4WRZWgbTUSuxrjgtIy+fp9aWt84NOEG2xDk1W+qWHS
sqp5PeFb3meK1bsCdBBVSjj1fKApKmzJWqiCr0Z8dzV8QsZWSpPzhyfp3puxKESV
dORGhMWdtdTMSPRysDUiTMGxn+fxaFTTx9Jsd0LbLizf/sob+ol9EjbNihaa5aKM
FdHpUgO08X3OAppmcGmGQdIXG2K+TmKMsvguRAK98OVYXhVUpB/BrCGnd9eGyjYY
mSQWrwKGm+Y/dGnr+ylHKxcyRQMmhc33gHmPAItNdMC8OemiHWZKKzoKBOzT2aME
pZc6ZRJesG46bfrNqID6ASAIw6SEA+Zj3rk3QsWNPAbHVJcZboY=
=LInS
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-01-19' of git://anongit.freedesktop.org/drm/drm
Pull more drm fixes from Dave Airlie:
"This is mostly amdgpu and xe fixes, with an amdkfd and nouveau fix
thrown in.
The amdgpu ones are just the usual couple of weeks of fixes. The xe
ones are bunch of cleanups for the new xe driver, the fix you put in
on the merge commit and the kconfig fix that was hiding the problem
from me.
amdgpu:
- DSC fixes
- DC resource pool fixes
- OTG fix
- DML2 fixes
- Aux fix
- GFX10 RLC firmware handling fix
- Revert a broken workaround for SMU 13.0.2
- DC writeback fix
- Enable gfxoff when ROCm apps are active on gfx11 with the proper FW
version
amdkfd:
- Fix dma-buf exports using GEM handles
nouveau:
- fix a unneeded WARN_ON triggering
xe:
- Fix for definition of wakeref_t
- Fix for an error code aliasing
- Fix for VM_UNBIND_ALL in the case there are no bound VMAs
- Fixes for a number of __iomem address space mismatches reported by
sparse
- Fixes for the assignment of exec_queue priority
- A Fix for skip_guc_pc not taking effect
- Workaround for a build problem on GCC 11
- A couple of fixes for error paths
- Fix a Flat CCS compression metadata copy issue
- Fix a misplace array bounds checking
- Don't have display support depend on EXPERT (as discussed on IRC)"
* tag 'drm-next-2024-01-19' of git://anongit.freedesktop.org/drm/drm: (71 commits)
nouveau/vmm: don't set addr on the fail path to avoid warning
drm/amdgpu: Enable GFXOFF for Compute on GFX11
drm/amd/display: Drop 'acrtc' and add 'new_crtc_state' NULL check for writeback requests.
drm/amdgpu: revert "Adjust removal control flow for smu v13_0_2"
drm/amdkfd: init drm_client with funcs hook
drm/amd/display: Fix a switch statement in populate_dml_output_cfg_from_stream_state()
drm/amdgpu: Fix the null pointer when load rlc firmware
drm/amd/display: Align the returned error code with legacy DP
drm/amd/display: Fix DML2 watermark calculation
drm/amd/display: Clear OPTC mem select on disable
drm/amd/display: Port DENTIST hang and TDR fixes to OTG disable W/A
drm/amd/display: Add logging resource checks
drm/amd/display: Init link enc resources in dc_state only if res_pool presents
drm/amd/display: Fix late derefrence 'dsc' check in 'link_set_dsc_pps_packet()'
drm/amd/display: Avoid enum conversion warning
drm/amd/pm: Fix smuv13.0.6 current clock reporting
drm/amd/pm: Add error log for smu v13.0.6 reset
drm/amdkfd: Fix 'node' NULL check in 'svm_range_get_range_boundaries()'
drm/amdgpu: drop exp hw support check for GC 9.4.3
drm/amdgpu: move debug options init prior to amdgpu device init
...
(controllers set the flag, but there is no client to use it). Also,
CLASS_SPD support gets simplified to prepare removal in the future.
Class based instantiation is not recommended these days anyhow.
Furthermore, I2C core now creates a debugfs directory per I2C adapter.
Current bus driver users were converted to use it. Then, there are also
quite some driver updates. Standing out are patches for the wmt-driver
which is refactored to support more variants. This is the rebased pull
request where a large series for the designware driver was dropped.
-----BEGIN PGP SIGNATURE-----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=8D3Q
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"This removes the currently unused CLASS_DDC support (controllers set
the flag, but there is no client to use it).
Also, CLASS_SPD support gets simplified to prepare removal in the
future. Class based instantiation is not recommended these days
anyhow.
Furthermore, I2C core now creates a debugfs directory per I2C adapter.
Current bus driver users were converted to use it.
Finally, quite some driver updates. Standing out are patches for the
wmt-driver which is refactored to support more variants.
This is the rebased pull request where a large series for the
designware driver was dropped"
* tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
MAINTAINERS: use proper email for my I2C work
i2c: stm32f7: add support for stm32mp25 soc
i2c: stm32f7: perform I2C_ISR read once at beginning of event isr
dt-bindings: i2c: document st,stm32mp25-i2c compatible
i2c: stm32f7: simplify status messages in case of errors
i2c: stm32f7: perform most of irq job in threaded handler
i2c: stm32f7: use dev_err_probe upon calls of devm_request_irq
i2c: i801: Add lis3lv02d for Dell XPS 15 7590
i2c: i801: Add lis3lv02d for Dell Precision 3540
i2c: wmt: Reduce redundant: REG_CR setting
i2c: wmt: Reduce redundant: function parameter
i2c: wmt: Reduce redundant: clock mode setting
i2c: wmt: Reduce redundant: wait event complete
i2c: wmt: Reduce redundant: bus busy check
i2c: mux: reg: Remove class-based device auto-detection support
i2c: make i2c_bus_type const
dt-bindings: at24: add ROHM BR24G04
eeprom: at24: use of_match_ptr()
i2c: cpm: Remove linux,i2c-index conversion from be32
i2c: imx: Make SDA actually optional for bus recovering
...
Return value of 'to_amdgpu_crtc' which is container_of(...) can't be
null, so it's null check 'acrtc' is dropped.
Fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9302 amdgpu_dm_atomic_commit_tail() error: we previously assumed 'acrtc' could be null (see line 9299)
Added 'new_crtc_state' NULL check for function
'drm_atomic_get_new_crtc_state' that retrieves the new state for a CRTC,
while enabling writeback requests.
Cc: stable@vger.kernel.org
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is likely that the statement related to 'dml_edp' is misplaced. So move
it in the correct "case SIGNAL_TYPE_EDP".
Fixes: 7966f319c6 ("drm/amd/display: Introduce DML2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
For usb4 connector, AUX transaction is handled by dmub utilizing a differnt
code path comparing to legacy DP connector. If the usb4 DP connector is
disconnected, AUX access will report EBUSY and cause igt@kms_dp_aux_dev
fail.
[How]
Align the error code with the one reported by legacy DP as EIO.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
core_mode_programming in DML2 should output watermark calculations
to locals, but it incorrectly uses mode_lib
[How]
update code to match HW DML2
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Not clearing the memory select bits prior to OPTC disable can cause DSC
corruption issues when attempting to reuse a memory instance for another
OPTC that enables ODM.
[How]
Clear the memory select bits prior to disabling an OPTC.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We can experience DENTIST hangs during optimize_bandwidth or TDRs if
FIFO is toggled and hangs.
[How]
Port the DCN35 fixes to DCN314.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When mapping resources, resources could be unavailable.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
res_pool is not initialized in all situations such as virtual
environments, and therefore link encoder resources should not be
initialized if res_pool is NULL.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In link_set_dsc_pps_packet(), 'struct display_stream_compressor *dsc'
was dereferenced in a DC_LOGGER_INIT(dsc->ctx->logger); before the 'dsc'
NULL pointer check.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dpms.c:905 link_set_dsc_pps_packet() warn: variable dereferenced before check 'dsc' (see line 903)
Cc: stable@vger.kernel.org
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Return value of 'to_amdgpu_crtc' which is container_of(...) can't be
null, so it's null check 'acrtc' is dropped.
Fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9302 amdgpu_dm_atomic_commit_tail() error: we previously assumed 'acrtc' could be null (see line 9299)
Added 'new_crtc_state' NULL check for function
'drm_atomic_get_new_crtc_state' that retrieves the new state for a CRTC,
while enabling writeback requests.
Cc: stable@vger.kernel.org
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is likely that the statement related to 'dml_edp' is misplaced. So move
it in the correct "case SIGNAL_TYPE_EDP".
Fixes: 7966f319c6 ("drm/amd/display: Introduce DML2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After removal of the legacy EEPROM driver and I2C_CLASS_DDC support in
olpc_dcon there's no i2c client driver left supporting I2C_CLASS_DDC.
Class-based device auto-detection is a legacy mechanism and shouldn't
be used in new code. So we can remove this class completely now.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
- Align the returned error code with legacy DP
- Allow Z8 for multiplane configurations on DCN35
- Set default Z8 minimum residency for DCN35
- Rework DC Z10 restore
- Enable Panel Replay for static screen use case
- Add DP audio BW validation
- Fix dml2 assigned pipe search
- Ensure populate uclk in bb construction
- Update P010 scaling cap
- Reenable windowed mpo odm support
- Fix DML2 watermark calculation
- Clear OPTC mem select on disable
- Floor to mhz when requesting dpp disp clock changes to SMU
- Port DENTIST hang and TDR fixes to OTG disable W/A
- Add logging resource checks
- Add Replay IPS register for DMUB command table
- Init link enc resources in dc_state only if res_pool presents
- Allow IPS2 during Replay
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Martin Leung <martin.leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For usb4 connector, AUX transaction is handled by dmub utilizing a differnt
code path comparing to legacy DP connector. If the usb4 DP connector is
disconnected, AUX access will report EBUSY and cause igt@kms_dp_aux_dev
fail.
[How]
Align the error code with the one reported by legacy DP as EIO.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Power improvement over DCN314, but also addresses a functional issue
where plane_state remains uncleared on pipes that aren't actually
active.
[How]
Update the check to allow for zero streams to be treated as z8 allow.
Update the check to remove plane count on the active stream case.
Z8 will still be blocked based on stutter duration, which is likely to
be the case for most multi plane configurations.
Reviewed-by: Gabe Teeger <gabe.teeger@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Match DCN314's policy.
Reviewed-by: Gabe Teeger <gabe.teeger@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The call currently does two things:
1. Exits DMCUB from idle optimization if it was in
2. Checks DMCUB scratch register to determine if we need to call
DMCUB to do deferred HW restore and then sends the command if it's
ready for it.
By doing (1) we prevent driver idle from being renotified in the cases
where driver had previously allowed DC level idle optimizations via
dc_allow_idle_optimizations since it thinks:
allow == dc->idle_optimizations_allowed
...and that the operation is a no-op.
We want driver idle to be resent at the next opprotunity to do so
for video playback cases.
[How]
Migrate all usecases of dc_z10_restore to only perform (2).
Add extra calls to dc_allow_idle_optimizations to handle (1) and also
keep SW state matching with when we requested enter/exit of DMCUB
idle optimizations.
Ensure cursor idle optimizations false always get called when IPS
is supported.
Further rework/redesign is needed to decide whether we need a separate
level of DM allow vs DC allow and when to attempt re-entry.
Reviewed-by: Yihan Zhu <yihan.zhu@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Enable the Panel Replay if eDP panel and ASIC support.
(prioritize Panel Replay over PSR)
[How]
- Setup the Panel Replay config during the device init
(prioritize Panel Replay over PSR).
- Separate the Replay init function into two functions
amdgpu_dm_link_setup_replay() and amdgpu_dm_set_replay_caps()
to fix the issue in the earlier commit that cause PSR and Replay
enabled at the same time.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Timings with small HBlank (such as CVT RBv2) can result in insufficient
HBlank bandwidth for audio SDP transmission when DSC is active. This
will cause some higher bandwidth audio modes to fail.
The combination of CVT RBv2 timings + DSC can commonly be encountered
in MST scenarios.
[How]
Add DP audio bandwidth validation for 8b/10b MST and 128b/132b SST/MST
cases and filter out modes that cannot be supported with the current
timing config.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
DML2 currently finds assigned pipes in array order rather than the
existing linked list order. This results in rearranging pipe order
on flip and more importantly otg inst and pipe idx mismatch.
This change preserves the order of existing pipes and guarantees
the head pipe will have matching otg inst and pipe idx.
Reviewed-by: Gabe Teeger <gabe.teeger@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- For some SKUs, the optimal DCFCLK for each UCLK is less than the
smallest DCFCLK STA target due to low memory bandwidth. There is
an assumption that the DCFCLK STA targets will always be less
than one of the optimal DCFCLK values, but this is not true for
SKUs that have low memory bandwidth. In this case we need to
populate the optimal UCLK for each DCFCLK STA targets as the max
UCLK freq.
- Also fix a bug in DML where start_state is not assigned and used
correctly.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Keep the same as previous APU and also insert clock dump
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
core_mode_programming in DML2 should output watermark calculations
to locals, but it incorrectly uses mode_lib
[How]
update code to match HW DML2
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Not clearing the memory select bits prior to OPTC disable can cause DSC
corruption issues when attempting to reuse a memory instance for another
OPTC that enables ODM.
[How]
Clear the memory select bits prior to disabling an OPTC.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
SMU uses discrete dpp and disp clock levels. When we submit SMU request
for clock changes in Mhz we need to floor the requested value from Khz so
SMU will choose the next higher clock level in Khz to set. If we ceil to
Mhz, SMU will have to choose the next higher clock level after the ceil,
which could result in unnecessarily jumpping to the next level.
For example, we request 1911,111Khz which is exactly one of the SMU preset
level. If we pass 1912Mhz, SMU will choose 2150,000 khz. If we pass
1911Mhz, SMU will choose 1911,111kHz, which is the expected value.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We can experience DENTIST hangs during optimize_bandwidth or TDRs if
FIFO is toggled and hangs.
[How]
Port the DCN35 fixes to DCN314.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When mapping resources, resources could be unavailable.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Theoretically, it would be possible for a buggy or malicious VBIOS to
overwrite past the bounds of the passed parameters (or its own
workspace); add bounds checking to prevent this from happening.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3093
Signed-off-by: Alexander Richards <electrodeyt@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Introduce a new Replay mode for DMUB version 0.0.199.0
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
res_pool is not initialized in all situations such as virtual
environments, and therefore link encoder resources should not be
initialized if res_pool is NULL.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add regkey to block video playback in IPS2 by default
Allow idle optimizations in the same spot we allow Replay for
video playback usecases.
Avoid sending it when there's an external display connected by
modifying the allow idle checks to check for active non-eDP screens.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In link_set_dsc_pps_packet(), 'struct display_stream_compressor *dsc'
was dereferenced in a DC_LOGGER_INIT(dsc->ctx->logger); before the 'dsc'
NULL pointer check.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dpms.c:905 link_set_dsc_pps_packet() warn: variable dereferenced before check 'dsc' (see line 903)
Cc: stable@vger.kernel.org
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clang warns (or errors with CONFIG_WERROR=y) when performing arithmetic
with different enumerated types, which is usually a bug:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_dpia_bw.c:548:24: error: arithmetic between different enumeration types ('const enum dc_link_rate' and 'const enum dc_lane_count') [-Werror,-Wenum-enum-conversion]
548 | link_cap->link_rate * link_cap->lane_count * LINK_RATE_REF_FREQ_IN_KHZ * 8;
| ~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~
1 error generated.
In this case, there is not a problem because the enumerated types are
basically treated as '#define' values. Add an explicit cast to an
integral type to silence the warning.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1976
Fixes: 5f3bce1326 ("drm/amd/display: Request usb4 bw for mst streams")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Improve z8/z10 support.
- Revert some of the VRR optimization.
- Improve usb4 when using MST.
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
