Qcom PCIe RCs can successfully exit from L1SS during OS runtime. However,
during system suspend, the Qcom PCIe RC driver may remove all resource
votes and turn off the PHY to maximize power savings.
Consequently, when the host is in system suspend with the link in L1SS and
the endpoint asserts CLKREQ#, the RC driver must restore the PHY and enable
the REFCLK. This recovery process causes the L1SS exit latency time to be
exceeded (roughly L10_REFCLK_ON + T_COMMONMODE). If the RC driver were to
retain all votes during suspend, L1SS exit would succeed without issue but
at the expense of higher power consumption.
When the host fails to move the link from L1SS to L0 within the
L10_REFCLK_ON + T_COMMONMODE time, the endpoint may treat it as a fatal
condition and trigger Link Down (LDn) during resume. This LDn results in a
reset that destroys the internal device state.
To ensure that the client drivers can properly handle this scenario, let
them know about this platform limitation by setting the
'pci_host_bridge::broken_l1ss_resume' flag.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260519-l1ss-fix-v2-3-b2c3a4bdeb15@oss.qualcomm.com
Per PCIe v7.0, sec 5.5.3.3.1, when exiting L1.2 due to an endpoint
asserting CLKREQ# signal, the REFCLK must be turned on within the latency
advertised in the LTR message. This requirement applies to L1.1 as well.
On some platforms like Qcom, these requirements are satisfied during OS
runtime, but not while resuming from the system suspend. This happens
because the PCIe RC driver may remove all resource votes and turn off the
PHY analog circuitry during suspend to maximize power savings while keeping
the link in L1SS.
Consequently, when the endpoint asserts CLKREQ# to wake up, the RC driver
must restore the PHY and enable the REFCLK. When this recovery process
exceeds the L1SS exit latency time (roughly L10_REFCLK_ON + T_COMMONMODE),
the endpoint may treat it as a fatal condition and trigger Link Down (LDn).
This results in a reset that destroys the internal device state.
So to indicate this platform limitation to the client drivers, introduce a
new flag 'pci_host_bridge::broken_l1ss_resume' and check it in
pci_suspend_retains_context(). If the flag is set by the RC driver, the API
will return 'false' indicating the client drivers that the device context
may not be retained and the drivers must be prepared for context loss.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260519-l1ss-fix-v2-2-b2c3a4bdeb15@oss.qualcomm.com
Currently, PCI endpoint drivers (e.g. nvme) use pm_suspend_via_firmware()
to check whether device state is preserved during system suspend. If
firmware will be invoked at the end of suspend, we don't know whether
devices will retain their internal state.
But device context might be lost due to platform issues as well. Having
those checks in endpoint drivers will not scale and will cause a lot of
code duplication.
Add pci_suspend_retains_context() as a sole point of truth that the
endpoint drivers can rely on to check whether they can expect the device
context to be retained or not.
If pci_suspend_retains_context() returns 'false', drivers need to prepare
for context loss by performing actions such as resetting the device, saving
the context, shutting it down etc. If it returns 'true', drivers do not
need to perform any special action and can leave the device in active
state.
Right now, this API only incorporates pm_suspend_via_firmware(), but will
be extended in future commits.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260519-l1ss-fix-v2-1-b2c3a4bdeb15@oss.qualcomm.com
Add support for transitioning PCIe endpoints under host bridge into D3cold
by integrating with the DWC core suspend/resume helpers.
Implement PME_Turn_Off message generation via ELBI_SYS_CTRL and hook it
into the DWC host operations so the controller follows the standard
PME_Turn_Off based power-down sequence before entering D3cold.
When the device is suspended into D3cold, fully tear down interconnect
bandwidth and OPP votes. If D3cold is not entered, retain existing
behavior by keeping the required interconnect and OPP votes.
Use dw_pcie::skip_pwrctrl_off to avoid powering off devices during suspend
to preserve wakeup capability of the devices and also not to power on the
devices in the init path.
Finally, drop the qcom_pcie::suspended flag and rely on the existing
dw_pcie::suspended state, which now drives both the power-management flow
and the interconnect/OPP handling.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260429-d3cold-v5-5-89e9735b9df6@oss.qualcomm.com
Previously, the driver skipped putting the link into L2 and device state in
D3cold whenever L1 ASPM was enabled, since some devices (e.g. NVMe) expect
low resume latency and may not tolerate deeper power states. However, such
devices typically remain in D0 and are already covered by the new helper's
requirement that all endpoints be in D3hot before the devices under host
bridge may enter D3cold.
Replace the local L1/L1SS-based check in dw_pcie_suspend_noirq() with the
shared pci_host_common_d3cold_possible() helper to decide whether the
devices under host bridge can safely transition to D3cold.
In addition, propagate PME-from-D3cold capability information from the
helper and record it in skip_pwrctrl_off. Some devices (e.g. M.2 cards
without auxiliary power) cannot send PME when the main power is removed,
even if they advertise PME-from-D3cold support. This allows controller
power-off to be skipped when required to preserve wakeup functionality.
While at it, update the 'dw_pcie::suspended' flag in dw_pcie_resume_noirq()
only after the PCIe link resumes successfully, to avoid marking the
controller as active when link resume fails.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
[mani: commit log and added TODO to query Vaux]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260429-d3cold-v5-4-89e9735b9df6@oss.qualcomm.com
Some Qcom PCIe controller variants bring the PHY out of test power-down
(PHY_TEST_PWR_DOWN) during init. When the link is later transitioned to
D3cold and the driver disables PCIe clocks and/or regulators without
explicitly re-asserting PHY_TEST_PWR_DOWN, the PHY can remain partially
powered, leading to avoidable power leakage.
Update the init-path comments to reflect that PARF_PHY_CTRL is used to
power the PHY on. Also, for controller revisions that enable PHY power in
init (2.3.2, 2.3.3, 2.4.0, 2.7.0 and 2.9.0), explicitly power the PHY down
via PARF_PHY_CTRL in the deinit path before disabling clocks or regulators.
This ensures the PHY is put into a defined low-power state prior to
removing its supplies, preventing leakage when entering D3cold.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260429-d3cold-v5-3-89e9735b9df6@oss.qualcomm.com
For older SoCs like SC7280, reading DBI LTSSM register after sending
PME_Turn_Off message causes NOC error.
To avoid unsafe DBI accesses, introduce qcom_pcie_get_ltssm() to retrieve
the LTSSM state without DBI. For newer platforms, read the LTSSM state from
the PARF_LTSSM register; for older platforms continue to retrieve it from
ELBI_SYS_STTS.
This helper is used in place of direct DBI-based link state checks in the
D3cold path after sending PME_Turn_Off message, ensuring the LTSSM state
can be queried safely even after DBI access is no longer valid.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
[mani: commit log and fixed get_ltssm() check]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260429-d3cold-v5-2-89e9735b9df6@oss.qualcomm.com
Add a common helper, pci_host_common_d3cold_possible(), to determine
whether PCIe devices under host bridge can safely transition to D3cold.
This helper is intended to be used by PCI host controller drivers to decide
whether they can safely put the endpoint devices into D3cold based on their
power state and wakeup capabilities. Once the devices are transitioned into
D3cold, the host controller can be safely powered off.
The helper walks all devices on the all downstream buses and only allows
the devices to enter D3cold if all PCIe endpoints are already in
PCI_D3hot. This ensures that the host controller driver does not broadcast
PME_Turn_Off or power down the controller while any active endpoint still
requires the link to remain powered.
For devices that may wake the system, the helper additionally requires that
the device supports PME wake from D3cold (via WAKE#). Devices that do not
have wakeup enabled are not restricted by this check and do not block the
devices under host bridge from entering D3cold.
Devices without a bound driver and with PCI not enabled via sysfs are
treated as inactive and therefore do not prevent the devices under host
bridge from entering D3cold. This allows controllers to power down more
aggressively when there are no actively managed endpoints.
Some devices (e.g. M.2 without auxiliary power) lose PME detection when
main power is removed. Even if such devices advertise PME-from-D3cold
capability, entering D3cold may break wakeup. Return PME-from-D3cold
capability via 'pme_capable' parameter so PCIe controller drivers can apply
platform-specific handling to preserve wakeup functionality.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
[mani: commit log and removed the device checks for d3cold]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260429-d3cold-v5-1-89e9735b9df6@oss.qualcomm.com
Older steppings of the Loongson-3C6000 series incorrectly report the
supported link speeds on their PCIe bridges (device IDs 0x3c19, 0x3c29)
as only 2.5 GT/s, despite the upstream bus supporting speeds from
2.5 GT/s up to 16 GT/s.
As a result, since commit 774c71c52a ("PCI/bwctrl: Enable only if more
than one speed is supported"), bwctrl will be disabled if there's only
one 2.5 GT/s value in vector 'supported_speeds'.
Manually override the 'supported_speeds' field for affected PCIe bridges
with those found on the upstream bus to correctly reflect the supported
link speeds. Updating the speeds to reflect what the hardware actually
supports avoids quirks in drivers consuming the speed information.
This commit was originally found from AOSC OS[1].
Fixes: cd89edda40 ("PCI: loongson: Add ACPI init support")
Signed-off-by: Ayden Meng <aydenmeng@yeah.net>
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
[Ziyao Li: move from drivers/pci/quirks.c to drivers/pci/controller/pci-loongson.c]
Signed-off-by: Ziyao Li <liziyao@uniontech.com>
[Xi Ruoyao: Fixed falling through logic, added debug log, Fixes tag and rebased to 7.0-rc7]
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: commit log, https://lore.kernel.org/all/9d815df3b33a63223112b97440c01247935363c1.camel@xry111.site]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Lain Fearyncess Yang <fsf@live.com>
Tested-by: Ayden Meng <aydenmeng@yeah.net>
Tested-by: Mingcong Bai <jeffbai@aosc.io>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Cc: stable@vger.kernel.org
Link: 4392f44136
Link: https://github.com/AOSC-Tracking/linux/pull/2#1
Link: https://patch.msgid.link/20260412101731.107059-1-xry111@xry111.site
When pwrctrl integration was added, the error message for
pci_pwrctrl_create_devices() failure was incorrectly added after the goto
statement, causing it to be skipped.
Move the goto statement after the dev_err_probe() call so that the
error message actually gets printed (or saved if probe is deferred).
Fixes: 1a152e2194 ("PCI: mediatek-gen3: Integrate new pwrctrl API")
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/all/adjNaKB5KGpl6qIp@stanley.mountain/
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Hans Zhang <18255117159@163.com>
Link: https://patch.msgid.link/20260512103347.1751080-1-wenst@chromium.org
The kstrtou32() function returns negative error code or zero on success.
However, in this case "val" is a u32 and the function returns signed long,
so negative error codes from kstrtou32() are returned as high positive
values.
Store the error code in an int instead.
Fixes: d20ee8e2db ("PCI: dwc: Add debugfs based Error Injection support for DWC")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Hans Zhang <18255117159@163.com>
Link: https://patch.msgid.link/agL-Uwfn26SI4Gb0@stanley.mountain
Program the Synopsys DesignWare PORT_AFR L1 entrance latency field from the
optional aspm-l1-entry-delay-ns device tree property (nanoseconds).
Convert delay to whole microseconds with ceiling division (DIV_ROUND_UP),
then derive the 3-bit hw encoding as the minimum of order_base_2(us) and 7.
If the property is not present or cannot be read, default to 7.
Hardware encoding (PORT_AFR L1 entrance latency, bits 27:29):
+--------------------------+----------+
| Advertised maximum | Code |
+--------------------------+----------+
| Maximum of 1 us | 000b |
+--------------------------+----------+
| Maximum of 2 us | 001b |
+--------------------------+----------+
| Maximum of 4 us | 010b |
+--------------------------+----------+
| Maximum of 8 us | 011b |
+--------------------------+----------+
| Maximum of 16 us | 100b |
+--------------------------+----------+
| Maximum of 32 us | 101b |
+--------------------------+----------+
| Maximum of 64 us | 110b |
+--------------------------+----------+
| Rest | 111b |
+--------------------------+----------+
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260515070753.3852840-2-mmaddireddy@nvidia.com
Replace the custom open function and file_operations with the standard
DEFINE_SHOW_ATTRIBUTE macro to reduce boilerplate code.
This also adds the previously missing .release() callback and fixes the
seq_file leak during close.
Signed-off-by: Hans Zhang <18255117159@163.com>
[mani: added a note about implicit release callback change spotted by Sashiko]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260508133432.1964491-1-18255117159@163.com
The current DT binding for pci-imx6 specifies the 'reset-gpios' property
in the host bridge node. However, the PERST# signal logically belongs to
individual Root Ports rather than the host bridge itself. This becomes
important when supporting PCIe Key E connector and the PCI power control
framework for pci-imx6 driver, which requires properties to be specified
in Root Port nodes.
Parse 'reset-gpios' from Root Port nodes and the PCIe bridge nodes under
the Root Port using the common helper pci_host_common_parse_ports(), and
update the reset GPIO handling to use the parsed port list from
bridge->ports. To maintain DT backwards compatibility, fall back to the
legacy method of parsing the host bridge node if the reset property is not
present in the Root Port nodes.
Since now the reset GPIO is obtained with GPIOD_ASIS flag, it may be in
input mode, so use gpiod_direction_output() instead of
gpiod_set_value_cansleep() to ensure the reset GPIO is properly
configured as output before setting its value.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
Link: https://patch.msgid.link/20260422093549.407022-5-sherry.sun@nxp.com
The PCIe endpoint may start responding or driving signals as soon as its
supply is enabled, even before the reference clock is stable. Asserting
PERST# before enabling the regulator ensures that the endpoint remains in
reset throughout the entire power-up sequence, until both power and refclk
are known to be stable and link initialization can safely begin.
Currently, the driver enables the vpcie3v3aux regulator in imx_pcie_probe()
before PERST# is asserted in imx_pcie_host_init(), which may cause PCIe
endpoint undefined behavior during early power-up. However, there is no
issue so far because PERST# is requested as GPIOD_OUT_HIGH in
imx_pcie_probe(), which guarantees that PERST# is asserted before enabling
the vpcie3v3aux regulator.
This prepares for an upcoming changes that will parse the reset property
using the new Root Port binding, which will use GPIOD_ASIS when requesting
the reset GPIO. With GPIOD_ASIS, the GPIO state is not guaranteed, so
explicit sequencing is required.
Fix the power sequencing by:
1. Moving vpcie3v3aux regulator enable from probe to
imx_pcie_host_init(), where it can be properly sequenced with PERST#.
2. Moving imx_pcie_assert_perst() before regulator and clock enable to
ensure correct ordering.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
Link: https://patch.msgid.link/20260422093549.407022-4-sherry.sun@nxp.com
Introduce generic helper functions to parse Root Port device tree nodes and
extract common properties like reset GPIOs. This allows multiple PCI host
controller drivers to share the same parsing logic.
Define struct pci_host_port to hold common Root Port properties (currently
only list of PERST# GPIO descriptors) and add pci_host_common_parse_ports()
to parse Root Port nodes from device tree.
Also add the 'ports' list to struct pci_host_bridge to better maintain
parsed Root Port information.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260422093549.407022-3-sherry.sun@nxp.com
The IMX6SX_GPR12_PCIE_TEST_POWERDOWN bit does not control the PCIe
reference clock on i.MX6SX. Instead, it is part of i.MX6SX PCIe core
reset sequence.
Move the IMX6SX_GPR12_PCIE_TEST_POWERDOWN assertion/deassertion into
the core reset functions to properly reflect its purpose. Remove the
.enable_ref_clk() callback for i.MX6SX since it was incorrectly
manipulating this bit.
Fixes: e3c06cd063 ("PCI: imx6: Add initial imx6sx support")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260319090844.444987-1-hongxing.zhu@nxp.com
The kerneldoc for device_is_bound() states that it must be called with
the device lock taken. Synchronize the two calls in pwrctrl core.
Fixes: b35cf3b6aa ("PCI/pwrctrl: Add APIs to power on/off pwrctrl devices")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260518100700.47581-1-bartosz.golaszewski@oss.qualcomm.com
In 2012, commit 26f41062f2 ("PCI: check for pci bar restore completion
and retry") amended pci_restore_state() to attempt BAR restoration up to 10
times. This was necessary because back in the day, only a 100 msec delay
was observed after pcie_flr() carried out a Function Level Reset. The
retries ensured that BARs were restored even if devices needed more time to
come out of reset.
In 2016, commit 5adecf817d ("PCI: Wait for up to 1000ms after FLR reset")
extended the delay to 1 sec. Commit a2758b6b8f ("PCI: Rename
pci_flr_wait() to pci_dev_wait() and make it generic") subsequently
extended it further to 60 sec.
The lengthened delay makes it unnecessary to retry BAR restoration, so
drop it.
Reported-by: Bjorn Helgaas <bhelgaas@google.com>
Closes: https://lore.kernel.org/r/20260416225745.GA41850@bhelgaas/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/785c98b50a7a00d0698848c75d51b8f5669ad18f.1777814679.git.lukas@wunner.de
For a device that advertises No_Soft_Reset == 0, a transition from D3hot to
D0uninitialized is a soft reset, and the resulting internal device state is
undefined.
Per PCIe r7.0, sec 2.3.1, a transition from D3hot to D0uninitialized
mandates a minimum 10 ms delay before accessing the device. Following this
delay, the device is permitted to respond to initial configuration requests
with a Request Retry Status (RRS) completion status if it needs more time
to initialize.
Call pci_dev_wait() after pci_power_up() performs a D3hot->D0uninitialized
transition to ensure the device is ready to accept config accesses, as is
done after the similar transition in pci_pm_reset().
If the device is already ready, this is essentially a no-op except for one
additional config read.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/20260518191220.636213-3-bhelgaas@google.com
pci_dev_wait() waits for a device to be Configuration-Ready after a reset,
such as a Function-Level Reset (FLR), a soft reset during a D3hot->
D0uninitialized transition when No_Soft_Reset == 0), or a power-up sequence
from D3cold->D0uninitialized.
If pci_dev_wait() returns success, the device is guaranteed to respond to
configuration requests with Successful Completion status. If it times out,
device is completely non-responsive.
Upgrade the log level from pci_warn() to pci_err() to reflect this failure
state.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/20260518191220.636213-2-bhelgaas@google.com
When power control for downstream devices was introduced in the
mediatek-gen3 PCIe controller driver, only the power to the downstream
devices was cut when the controller driver is removed. This matched
existing behavior, but in hindsight a proper power down sequence should
have been followed.
Call mtk_pcie_devices_power_down() on driver removal so that in addition
to removing power from the downstream devices, PERST# is asserted.
Fixes: 1a152e2194 ("PCI: mediatek-gen3: Integrate new pwrctrl API")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260505105918.1823170-1-wenst@chromium.org
Add a .shutdown() callback to control the timing of PERST# and power during
system shutdown to ensure that PERST# is asserted before power to the
connector is removed, as required by PCIe CEM r6.0, sec 2.2.
Signed-off-by: Jian Yang <jian.yang@mediatek.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260413071401.1151-3-jian.yang@mediatek.com
Some MediaTek chips stop generating REFCLK if the PCIE_PHY_RSTB signal of
PCIe controller is asserted at the start of mtk_pcie_devices_power_up().
But the driver deasserts PCIE_PHY_RSTB together with PCIE_PE_RSTB signal
that is used to deassert PERST#. This violates PCIe CEM r6.0, sec 2.11.2,
which mandates waiting for 100ms (PCIE_T_PVPERL_MS) after power becomes
stable.
Move the MAC, PHY and BRG reset deassert code above the PCIE_T_PVPERL_MS
delay and leave the PCIE_PE_RSTB deassertion after the delay.
Add the 10ms delay mentioned in the MediaTek datasheet after asserting
PCIE_BRG_RSTB and before accessing the PCIE_RST_CTRL_REG register.
Signed-off-by: Jian Yang <jian.yang@mediatek.com>
[mani: commit log and comments rewording]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260413071401.1151-2-jian.yang@mediatek.com
After commit 03f9209369 ("PCI: controller: Validate max-link-speed"),
pcie->gen stopped being assigned and as a result the established PCIe link
would stop supporting Gen3 speeds on 2712 since pcie->gen is used to
populate LnkCntl2 and LnkCap in brcm_pcie_set_gen().
If the 'max-link-speed' property is not specified, or it exceeds Gen3,
resort to the HW defaults.
Link: https://github.com/raspberrypi/linux/issues/7343
Reported-by: Dom Cobley <popcornmix@gmail.com>
Reported-by: Phil Elwell <phil@raspberrypi.com>
Fixes: 03f9209369 ("PCI: controller: Validate max-link-speed")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hans Zhang <18255117159@163.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260506164537.103196-1-florian.fainelli@broadcom.com
The chained IRQ handler is set during probe, but is only removed during the
driver remove(). If pci_host_probe() fails, the handler and INTx IRQ
domain remain set even though the devm-managed host bridge storage
containing struct altera_pcie will be released, leaving the handler with
a stale data pointer.
Interrupts are also enabled before pci_host_probe() is called. If probe
fails after that point, the controller interrupt source should be disabled
before the chained handler and INTx domain are removed.
So set the chained handler only after the INTx domain has been created.
Disable controller interrupts during IRQ teardown, and tear the IRQ setup
down if pci_host_probe() fails.
Fixes: c63aed7334 ("PCI: altera: Use pci_host_probe() to register host")
Signed-off-by: Mahesh Vaidya <mahesh.vaidya@altera.com>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Subhransu S. Prusty <subhransu.sekhar.prusty@altera.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260430204330.3121003-3-mahesh.vaidya@altera.com
altera_pcie_irq_teardown() calls irq_dispose_mapping() on pcie->irq.
However, pcie->irq is the parent IRQ returned by platform_get_irq(), not
the mapping created by Altera INTx irq_domain.
The Altera driver only sets the chained handler on the parent IRQ. It
should detach that handler during teardown, but it should not dispose the
parent IRQ mapping, which belongs to the parent interrupt controller's
irq_domain.
Drop irq_dispose_mapping(pcie->irq) from the teardown path.
Note that during irqchip remove(), the child IRQs should've disposed. But
since the chained handler itself is removed, there is no way the stale
child IRQs (if exists) could fire. So it is safe here.
Fixes: ec15c4d0d5 ("PCI: altera: Allow building as module")
Signed-off-by: Mahesh Vaidya <mahesh.vaidya@altera.com>
[mani: added a note about IRQ disposal]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Subhransu S. Prusty <subhransu.sekhar.prusty@altera.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260430204330.3121003-2-mahesh.vaidya@altera.com
Remove the redundant mode field from struct keembay_pcie and use the
existing mode field in struct dw_pcie instead.
This avoids duplication and prevents potential inconsistencies between
the two mode fields.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260501161010.71688-5-18255117159@163.com
Remove the redundant mode field from struct dw_plat_pcie and use the
existing mode field in struct dw_pcie instead.
This avoids duplication and prevents potential inconsistencies between
the two mode fields.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260501161010.71688-4-18255117159@163.com
Remove the redundant mode field from struct artpec6_pcie and use the
existing mode field in struct dw_pcie instead.
This avoids duplication and prevents potential inconsistencies between
the two mode fields.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260501161010.71688-3-18255117159@163.com
Remove the redundant mode field from struct dra7xx_pcie and use the
existing mode field in struct dw_pcie instead.
This avoids duplication and prevents potential inconsistencies between
the two mode fields.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260501161010.71688-2-18255117159@163.com
During resume, qcom_pcie_icc_opp_update() may access DBI registers before
the OPP votes are restored, triggering NoC errors.
Set the PCIe controller to the maximum OPP first in resume_noirq(), then
proceed with link/DBI accesses. The OPP is later updated again based on
the actual link bandwidth requirements.
Introduce a helper to reuse the max-OPP setup code and share it with
probe().
Fixes: 5b6272e0ef ("PCI: qcom: Add OPP support to scale performance")
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
[mani: commit log and error log rewording]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260416-setmaxopp-v1-1-6a74e2d945a0@oss.qualcomm.com
The ECRC (TLP digest) workaround was originally applied only for DesignWare
core version 4.90a. Per discussion in Synopsys case, the dependency of the
iATU TD bit on ECRC generation was removed in 5.10a, so apply the
workaround for all DWC versions below that release.
Replace the misleading comment that referred to raw version constants
with readable DesignWare release name to help readability.
Fixes: b210b1595606 ("PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well")
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
[mani: corrected fixes tag format]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260410062507.657453-1-mmaddireddy@nvidia.com
Add a shutdown handler for the AMD MDB PCIe host controller that
asserts the PERST# signal via GPIO before the system powers off or
reboots. This ensures the connected PCIe endpoint is held in reset
during shutdown.
Signed-off-by: Sai Krishna Musham <sai.krishna.musham@amd.com>
[mani: removed conditional check since GPIO APIs return safely if desc is NULL]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260427121227.290604-1-sai.krishna.musham@amd.com
The ATU base address was set in intel_pcie_host_setup(), which is called
via pp->ops->init(). However, dw_pcie_get_resources() runs before this
callback and sets a default atu_base of 0x300000, which then gets
overwritten by the driver's value of 0xC0000.
But this ordering is broken because atu_base must be set before
dw_pcie_get_resources() runs, not after. So move the atu_base assignment
from intel_pcie_host_setup() to intel_pcie_probe() to fix the
initialization order.
The call stack is:
intel_pcie_probe
dw_pcie_host_init
dw_pcie_host_get_resources
dw_pcie_get_resources <- sets atu_base = 0x300000
pp->ops->init
intel_pcie_rc_init
intel_pcie_host_setup <- was overwriting atu_base here
Additionally, add support for parsing the ATU region from the device tree.
If an 'atu' region is present in DT, the DWC core parses it via
dw_pcie_get_resources() and the driver does not set atu_base explicitly.
If 'atu' is absent, the driver falls back to the hardcoded offset (0xC0000
from DBI base) for backwards compatibility, with a warning to the user.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260417-pcie-intel-gw-v5-6-0a2b933fe04f@dev.tdt.de
The pcie-intel-gw driver had no .start_link() callback. Add one so the
driver works again and does not abort with the following error messages
during probing:
intel-gw-pcie d1000000.pcie: host bridge /soc/pcie@d1000000 ranges:
intel-gw-pcie d1000000.pcie: MEM 0x00dc000000..0x00ddffffff -> 0x00dc000000
intel-combo-phy d0c00000.combo-phy: Set combo mode: combophy[1]: mode: PCIe single lane mode
intel-gw-pcie d1000000.pcie: No outbound iATU found
intel-gw-pcie d1000000.pcie: Cannot initialize host
intel-gw-pcie d1000000.pcie: probe with driver intel-gw-pcie failed with error -22
intel-gw-pcie c1100000.pcie: host bridge /soc/pcie@c1100000 ranges:
intel-gw-pcie c1100000.pcie: MEM 0x00ce000000..0x00cfffffff -> 0x00ce000000
intel-combo-phy c0c00000.combo-phy: Set combo mode: combophy[3]: mode: PCIe single lane mode
intel-gw-pcie c1100000.pcie: No outbound iATU found
intel-gw-pcie c1100000.pcie: Cannot initialize host
intel-gw-pcie c1100000.pcie: probe with driver intel-gw-pcie failed with error -22
Fixes: c5097b9869 ("Revert "PCI: dwc: Wait for link up only if link is started"")
Fixes: da56a1bfba ("PCI: dwc: Wait for link up only if link is started")
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: remove timestamps]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260417-pcie-intel-gw-v5-5-0a2b933fe04f@dev.tdt.de
To improve the readability of the code, move the interrupt enable
instructions to a separate function. That is already done for the disable
interrupt instruction.
In addition, clear and disable all pending interrupts, as is done in
intel_pcie_core_irq_disable(). After that, enable all relevant interrupts
again. The 'PCIE_APP_IRNEN' definition contains all the relevant interrupts
that are of interest.
This change is also done in the MaxLinear SDK [1]. As I unfortunately don’t
have any documentation for this IP core, I suspect that the intention is to
set the IP core for interrupt handling to a specific state. Perhaps the
problem is that the IP core did not reinitialize the interrupt register
properly after a power cycle.
In my view, it can’t do any harm to switch the interrupt off and then on
again to set them to a specific state.
The reason why the MaxLinear SDK is used as a reference here is, that this
PCIe DWC IP is used in the URX851 and URX850 SoC. This SoC was originally
developed by Intel when they acquired Lantiq’s home networking division in
2015 [2]. In 2020 the home network division was sold to MaxLinear [3].
Since then, this SoC belongs to MaxLinear. They use their own SDK, which
runs on kernel version '5.15.x'.
[1] https://github.com/maxlinear/linux/blob/updk_9.1.90/drivers/pci/controller/dwc/pcie-intel-gw.c#L431
[2] https://www.intc.com/news-events/press-releases/detail/364/intel-to-acquire-lantiq-advancing-the-connected-home
[3] https://investors.maxlinear.com/press-releases/detail/395/maxlinear-to-acquire-intels-home-gateway-platform
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260417-pcie-intel-gw-v5-3-0a2b933fe04f@dev.tdt.de
The C preprocessor define 'PCIE_APP_INTX_OFST' is not used in the sources.
Delete it.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260417-pcie-intel-gw-v5-2-0a2b933fe04f@dev.tdt.de
Add three macros for declaring static binary attributes for PCI resource
files:
- pci_dev_resource_io_attr(), for I/O BAR resources (read/write)
- pci_dev_resource_uc_attr(), for memory BAR resources (mmap uncached)
- pci_dev_resource_wc_attr(), for write-combine resources (mmap WC)
Each macro only sets the callbacks its resource type needs. The I/O macro
conditionally includes mmap support via __PCI_RESOURCE_IO_MMAP_ATTRS on
architectures where arch_can_pci_mmap_io() is true at compile time (such as
PowerPC, SPARC, and Xtensa).
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-7-kwilczynski@kernel.org
Currently, the __resource_resize_store() allows writing to the
resourceN_resize sysfs attribute to change a BAR's size without checking
for capabilities, currently relying only on the file access check.
Resizing a BAR modifies PCI device configuration and can disrupt active
drivers. After the upcoming conversion to static attributes, it will also
trigger resource file updates via sysfs_update_groups().
Add a CAP_SYS_ADMIN check to prevent unprivileged users from performing BAR
resize operations.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260508043543.217179-6-kwilczynski@kernel.org
Both legacy and resource attributes set .f_mapping = iomem_get_mapping, so
the default generic_file_llseek() would consult iomem_inode for the file
size, which knows nothing about the attribute. That is why custom llseek
callbacks exist.
Currently, the legacy and resource attributes have .size set at creation
time, as such, using the attr->size is sufficient. However, the upcoming
static resource attributes will have .size == 0 set, since they are const,
and the .bin_size() callback will be used to provide the real size to
kernfs instead.
The legacy attributes operate on a struct pci_bus, not struct pci_dev, so
calling to_pci_dev() on them would be invalid.
Thus, split pci_llseek_resource() into two functions:
- pci_llseek_resource(), which derives the file size from the BAR using
pci_resource_len().
- pci_llseek_resource_legacy(), which uses attr->size directly.
Update the dynamic legacy attribute creation to use the new
pci_llseek_resource_legacy() callback.
The original pci_llseek_resource() was added in commit 24de09c16f ("PCI:
Implement custom llseek for sysfs resource entries").
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-5-kwilczynski@kernel.org
Currently, when the sysfs attributes for PCI resources are added
dynamically, the resource access callbacks are only set when the underlying
BAR type matches, using .read and .write for IORESOURCE_IO, and .mmap for
IORESOURCE_MEM or IORESOURCE_IO with arch_can_pci_mmap_io() support. As
such, when the callback is not set, the operation inherently fails.
After the conversion to static attributes, visibility callbacks will
control which resource files appear for each BAR, but the callbacks
themselves will always be set.
Add a type check to pci_resource_io() and pci_mmap_resource() to return
-EIO for an unsupported resource type.
Use the new pci_resource_is_io() and pci_resource_is_mem() helpers for the
type checks, replacing the open-coded bitwise flag tests and also drop the
local struct resource pointer in pci_mmap_resource().
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260508043543.217179-4-kwilczynski@kernel.org
Replace direct pdev->resource[] accesses with pci_resource_n(), and
pdev->resource[].flags accesses with pci_resource_flags().
No functional changes intended.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260508043543.217179-2-kwilczynski@kernel.org
We meet a crash when running stress-ng on x86_64 machine:
BUG: unable to handle page fault for address: ffa0000007f40000
RIP: 0010:pci_get_rom_size+0x52/0x220
Call Trace:
<TASK>
pci_map_rom+0x80/0x130
pci_read_rom+0x4b/0xe0
kernfs_file_read_iter+0x96/0x180
vfs_read+0x1b1/0x300
Our analysis reveals that the ROM space's start address is
0xffa0000007f30000, and size is 0x10000. Because of broken ROM space,
before calling readl(pds), the pds's value is 0xffa0000007f3ffff, which is
already pointed to the ROM space end, invoking readl() would read 4 bytes
therefore cause an out-of-bounds access and trigger a crash. Fix this by
adding image header and data structure checking.
We also found another crash on arm64 machine:
Unable to handle kernel paging request at virtual address ffff8000dd1393ff
Mem abort info:
ESR = 0x0000000096000021
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x21: alignment fault
The call trace is the same with x86_64, but the crash reason is that the
data structure addr is not aligned with 4, and arm64 machine report
"alignment fault". Fix this by adding alignment checking.
Fixes: 47b975d234 ("PCI: Avoid iterating through memory outside the resource window")
Suggested-by: Guanghui Feng <guanghuifeng@linux.alibaba.com>
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
[bhelgaas: shorten function names, wrap comments]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://patch.msgid.link/20260508082128.3344255-3-kanie@linux.alibaba.com
Convert the magic numbers associated with PCI ROM into named
definitions. Some of these definitions will be used in the second
fix patch.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://patch.msgid.link/20260508082128.3344255-2-kanie@linux.alibaba.com
When setting new_id of a PCI device driver using sysfs a lockdep splat
occurs. This is because new_id_store() builds a temporary pci_dev for
pci_match_device(), which calls device_match_driver_override(). That
depends on the driver_override.lock added by cb3d1049f4 ("driver core:
generalize driver_override in struct device").
The new driver_override.lock was not initialized in the temporary pci_dev,
resulting in this lockdep splat.
Initialize the temporary pci_dev to fix this.
Repro:
Build with CONFIG_LOCKDEP=y, boot with QEMU, and add a new ID:
# echo "8086 10f5" > /sys/bus/pci/drivers/e1000e/new_id
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 2 UID: 0 PID: 177 Comm: liveupdate-iomm Not tainted 7.0.0+ #9 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
register_lock_class+0x77e/0x790
lock_acquire+0xbf/0x2e0
pci_match_device+0x24/0x180
new_id_store+0x189/0x1d0
kernfs_fop_write_iter+0x14f/0x210
vfs_write+0x263/0x5e0
ksys_write+0x79/0xf0
do_syscall_64+0x117/0xf80
Fixes: 10a4206a24 ("PCI: use generic driver_override infrastructure")
Fixes: 8895d3bcb8 ("PCI: Fail new_id for vendor/device values already built into driver")
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
[bhelgaas: add commit log details and repro, trim backtrace]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260505234327.716630-1-skhawaja@google.com
Bernd reports passthrough failure of a Digital Devices Cine S2 V6 DVB
adapter plugged into an ASRock X570S PG Riptide board with BIOS version
P5.41 (09/07/2023):
ddbridge 0000:05:00.0: detected Digital Devices Cine S2 V6 DVB adapter
ddbridge 0000:05:00.0: cannot read registers
ddbridge 0000:05:00.0: fail
BIOS assigns an incorrect BAR to the DVB adapter which doesn't fit into the
upstream bridge window. The kernel corrects the BAR assignment:
pci 0000:07:00.0: BAR 0 [mem 0xfffffffffc500000-0xfffffffffc50ffff 64bit]: can't claim; no compatible bridge window
pci 0000:07:00.0: BAR 0 [mem 0xfc500000-0xfc50ffff 64bit]: assigned
Correction of the BAR assignment happens in an x86-specific fs_initcall,
pcibios_assign_resources(), after device enumeration in a subsys_initcall.
This order was introduced at the behest of Linus in 2004:
https://git.kernel.org/tglx/history/c/a06a30144bbc
No other architecture performs such a late BAR correction.
Bernd bisected the issue to commit a2f1e22390 ("PCI/ERR: Ensure error
recoverability at all times"), but it only occurs in the absence of commit
4d4c10f763 ("PCI: Explicitly put devices into D0 when initializing").
This combination exists in stable kernel v6.12.70, but not in mainline,
hence Bernd cannot reproduce the issue with mainline.
Since a2f1e22390, config space is saved on enumeration, prior to BAR
correction. Upon passthrough, the corrected BAR is overwritten with the
incorrect saved value by:
vfio_pci_core_register_device()
vfio_pci_set_power_state()
pci_restore_state()
But only if the device's current_state is PCI_UNKNOWN, as it was prior to
commit 4d4c10f763. Since the commit, it is PCI_D0, which changes the
behavior of vfio_pci_set_power_state() to no longer restore the state
without saving it first.
Alexandre is reporting the same issue as Bernd, but in his case, mainline
is affected as well. The difference is that on Alexandre's system, the
host kernel binds a driver to the device which is unbound prior to
passthrough, whereas on Bernd's system no driver gets bound by the host
kernel.
Unbinding sets current_state to PCI_UNKNOWN in pci_device_remove(), so when
vfio-pci is subsequently bound to the device, pci_restore_state() is once
again called without invoking pci_save_state() first.
To robustly fix the issue, always update saved_config_space upon resource
assignment.
Reported-by: Bernd Schumacher <bernd@bschu.de>
Closes: https://lore.kernel.org/r/acfZrlP0Ua_5D3U4@eldamar.lan/
Reported-by: Alexandre N. <an.tech@mailo.com>
Closes: https://lore.kernel.org/r/dd3c3358-de0f-4a56-9c81-04aceaab4058@mailo.com/
Fixes: a2f1e22390 ("PCI/ERR: Ensure error recoverability at all times")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Bernd Schumacher <bernd@bschu.de>
Tested-by: Alexandre N. <an.tech@mailo.com>
Cc: stable@vger.kernel.org # v6.12+
Link: https://patch.msgid.link/febc3f354e0c1f5a9f5b3ee9ffddaa44caccf651.1776268054.git.lukas@wunner.de
Reconfiguring ASPM when a device transitions to low-power state can enable
L1.1/L1.2 substates on the PCIe link at a time when the device is sleeping
and may be unable to exit them. ASPM should be reconfigured on D0 entry
(resume), not on the way down.
pci_set_low_power_state() calls pcie_aspm_pm_state_change() after writing
D3hot to PCI_PM_CTRL. pcie_aspm_pm_state_change() resets link->aspm_capable
to link->aspm_support and then calls pcie_config_aspm_path(), which can
enable ASPM L1.1/L1.2 substates on the PCIe link. If the device cannot
recover the link from L1.2 while in D3hot, subsequent config space reads
return 0xFFFF ("device inaccessible") and pci_power_up() fails with
messages like:
vfio-pci 0000:5d:00.0: Unable to change power state from D3hot to D0, device inaccessible
This was observed on NVIDIA H100 SXM5 GPUs bound to vfio-pci when Linux
runtime PM suspends them to D3hot: the GPU becomes permanently inaccessible
and disappears from the PCIe bus.
The call to pcie_aspm_pm_state_change() in pci_set_low_power_state() was
restored by f93e71aea6 ("Revert "PCI/ASPM: Remove
pcie_aspm_pm_state_change()""), which reverted 08d0cc5f34 ("PCI/ASPM:
Remove pcie_aspm_pm_state_change()"). The revert was necessary because the
removal broke suspend/resume on certain platforms that required ASPM to be
reconfigured on D0 entry. However, the revert restored the call in both
pci_set_full_power_state() (D0 entry) and pci_set_low_power_state()
(low-power entry).
Only the D0-entry call is needed to fix the suspend/resume regression. The
low-power-entry call is harmful: reconfiguring ASPM immediately after
putting a device into D3hot can enable link substates that the device or
platform cannot exit while the device is sleeping.
Remove the pcie_aspm_pm_state_change() call from pci_set_low_power_state().
ASPM will still be reconfigured correctly when the device returns to D0 via
pci_set_full_power_state().
Fixes: f93e71aea6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"")
Signed-off-by: Carlos Bilbao (Lambda) <carlos.bilbao@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260428040104.78524-1-carlos.bilbao@kernel.org
There's no point in retraining a failed 2.5GT/s device at 2.5GT/s, so just
don't and return early. While such devices might be unlikely to implement
Link Active reporting, we need to retrieve the maximum link speed and use
it in a conditional later on anyway, so the early check comes for free.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/alpine.DEB.2.21.2512080356070.49654@angie.orcam.me.uk
Rewrite a check for the maximum link speed in the Link Capabilities
register in terms of pcie_get_speed_cap(). No functional change.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/alpine.DEB.2.21.2512080348310.49654@angie.orcam.me.uk
Discard Vendor:Device ID matching in the PCIe failed link retraining quirk
and ignore the link status for the removal of the 2.5GT/s speed clamp,
whether applied by the quirk itself or the firmware earlier on. Revert to
the original target link speed if this final link retraining has failed.
This is so that link training noise in hot-plug scenarios does not make a
link remain clamped to the 2.5GT/s speed where an event race has led the
quirk to apply the speed clamp for one device, only to leave it in place
for a subsequent device to be plugged in.
Refer to the Link Capabilities register directly for the maximum link speed
determination so as to streamline backporting.
Fixes: a89c82249c ("PCI: Work around PCIe link training failures")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Cc: stable@vger.kernel.org # v6.5+
Link: https://patch.msgid.link/alpine.DEB.2.21.2512080331530.49654@angie.orcam.me.uk
The driver includes the legacy GPIO header <linux/gpio.h> but does not use
any symbols from it and actually wants <linux/gpio/consumer.h>, so fix this
up.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260506084858.867884-2-andriy.shevchenko@linux.intel.com
Add device IDs for the next generation of switchtec products.
No changes to the driver were required with the new version of the
hardware.
[logang: rewrote commit message]
Signed-off-by: Ben Reed <Ben.Reed@microchip.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260505161633.67454-1-logang@deltatee.com
Some endpoint platforms cannot use platform MSI / GIC ITS to implement
EP-side doorbells. In those cases, EPF drivers cannot provide an
interrupt-driven doorbell and often fall back to polling.
Add an "embedded" doorbell backend that uses a controller-integrated
doorbell target (e.g. DesignWare integrated eDMA interrupt-emulation
doorbell).
The backend locates the doorbell register and a corresponding Linux IRQ
via the EPC aux-resource API. If the doorbell register is already
exposed via a fixed BAR mapping, provide BAR+offset. Otherwise provide
the DMA address returned by dma_map_resource() (which may be an IOVA
when an IOMMU is enabled) so EPF drivers can map it into BAR space.
When MSI doorbell allocation fails with -ENODEV,
pci_epf_alloc_doorbell() falls back to this embedded backend.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260414141514.1341429-8-den@valinux.co.jp
pci-epf-test advertises the doorbell target to the RC as a BAR number
and an offset, and the RC rings the doorbell with a single DWORD MMIO
write.
Some doorbell backends may report that the doorbell target is already
exposed via a platform-owned fixed BAR (db_msg[0].bar/offset). In that
case, reuse the pre-exposed window and do not reprogram the BAR with
pci_epc_set_bar().
Also honor db_msg[0].irq_flags when requesting the doorbell IRQ, and
only restore the original BAR mapping on disable if pci-epf-test
programmed it.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: wrap comment]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260414141514.1341429-7-den@valinux.co.jp
Support doorbell backends where the doorbell target is already exposed
via a platform-owned fixed BAR mapping and/or where the doorbell IRQ
must be requested with specific flags.
When pci_epf_alloc_doorbell() provides db_msg[].bar/offset, reuse the
pre-exposed BAR window and skip programming a new inbound mapping. Also
honor db_msg[].irq_flags when requesting the doorbell IRQ.
Multiple doorbells may share the same Linux IRQ. Avoid duplicate
request_irq() calls by requesting each unique virq once.
Make pci-epf-vntb work with platform-defined or embedded doorbell
backends without exposing backend-specific details to the consumer
layer.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260414141514.1341429-6-den@valinux.co.jp
There are two ways to graft resource into resource tree in PCI,
pci_assign_resource() and pci_claim_resource(). Only the former logs
the action, which complicated troubleshooting the cases where resources
are assigned by pci_claim_resource(), which mostly assigns the addresses
inherited from the FW.
Add logging into pci_claim_resource() to make troubleshooting easier.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260429122617.7324-2-ilpo.jarvinen@linux.intel.com
Prepare pci-ep-msi for non-MSI doorbell backends.
Factor MSI doorbell allocation into a helper and extend struct
pci_epf_doorbell_msg with:
- irq_flags: required IRQ request flags (e.g. IRQF_SHARED for some
backends)
- type: doorbell backend type
- bar/offset: pre-exposed doorbell target location, if any
Initialize these fields for the existing MSI-backed doorbell
implementation.
Also add PCI_EPF_DOORBELL_EMBEDDED type, which is to be implemented in a
follow-up patch.
No functional changes.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260414141514.1341429-5-den@valinux.co.jp
Implement the EPC aux-resource API for DesignWare endpoint controllers
with integrated eDMA.
Currently, only report an interrupt-emulation doorbell register
(PCI_EPC_AUX_DOORBELL_MMIO), including its Linux IRQ and the write data
needed to trigger the interrupt.
If the DMA controller MMIO window is already exposed via a
platform-owned fixed BAR subregion, also provide the BAR number and
offset so EPF drivers can reuse it without reprogramming the BAR.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260414141514.1341429-4-den@valinux.co.jp
Some DesignWare PCIe controllers integrate an eDMA block whose registers
are located in a dedicated register window.
The EP-side aux-resource code exposes an interrupt-emulation doorbell
register (DOORBELL_MMIO) from that window. Its location is derived from
the start of the eDMA register window plus the doorbell offset already
provided by dw-edma, and the window size is used to validate the
computed register location.
Record the physical base and size of the integrated eDMA register window
in struct dw_pcie so the EP-side DesignWare aux-resource provider can
construct that doorbell resource.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260414141514.1341429-3-den@valinux.co.jp
Endpoint controller drivers may integrate auxiliary blocks (e.g. DMA
engines) whose register windows and descriptor memories metadata need to
be exposed to a remote peer. Endpoint function drivers need a generic
way to discover such resources without hard-coding controller-specific
helpers.
Add pci_epc_get_aux_resources_count() / pci_epc_get_aux_resources() and
the corresponding pci_epc_ops callbacks. The count helper returns the
number of available resources, while the get helper fills a
caller-provided array of resources described by type, physical address
and size, plus type-specific metadata.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Suggested-by: Frank Li <Frank.li@nxp.com>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260414141514.1341429-2-den@valinux.co.jp
If a bus has hotplug slots that implement the slot's reset_slot callback,
it is not safe to do the non-slot specific bus reset, so don't fallback to
it. If a slot reset does fail, the subsequent bus reset will attempt a 2nd
link reset on top of previous and fail to handle the hotplug events.
Fixes: 8238cb69c0 ("PCI: Make reset_subordinate hotplug safe")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260421150644.3543733-1-kbusch@meta.com
Revert b0e85c3c85 ("PCI: Add Kconfig options for MPS/MRRS strategy"),
which allowed build-time selection of the "off", "default", "safe",
"performance", or "peer2peer" strategies for MPS and MRRS configuration.
These strategies can be selected at boot-time using the
"pci=pcie_bus_tune_*" kernel parameters.
Per the discussion mentioned below, these Kconfig options were added to
work around a hardware defect in a WiFi device used in a cable modem. The
defect occurred only when the device was configured with MPS=128, and
Kconfig was a way to avoid that setting. It was easier for the modem
vendor to use Kconfig and update the kernel image than to change the kernel
parameters.
Neither Kconfig nor kernel parameters are a complete solution because the
broken WiFi device may be used in other systems where it may be configured
with MPS=128 and be susceptible to the defect.
Remove the Kconfig settings to simplify the MPS code. If we can identify
the WiFi device in question, we may be able to make a generic quirk to
avoid the problem on all system.
This is not a fix and should not be backported to previous kernels.
Link: https://lore.kernel.org/all/CA+-6iNzd0RJO0L021qz8CKrSviSst6QehY-QtJxz_-EVY0Hj0Q@mail.gmail.com
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260326221311.1356180-1-bhelgaas@google.com
Extend the checks in pcim_p2pdma_init() and pcim_p2pdma_provider() to
exclude functions that have pdev->non_mappable_bars set.
Consumers such as VFIO were previously able to map these for access by the
CPU or P2P. Update the comment on non_mappable_bars to show it refers to
any access, not just userspace CPU access.
Fixes: 372d6d1b8a ("PCI/P2PDMA: Refactor to separate core P2P functionality from memory allocation")
Suggested-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Matt Evans <mattev@meta.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Alex Williamson <alex@shazbot.org>
Link: https://patch.msgid.link/20260423173051.1999679-1-mattev@meta.com
pci_pwrctrl_is_required() detects whether a device needs PCI pwrctrl
support. It is currently used in pci_pwrctrl_create_device(), but not in
pci_pwrctrl_power_{on/off}_device() APIs. This leads to pwrctrl core trying
to power on/off incompatible devices like USB hub downstream ports defined
in DT.
Add this check to prevent pwrctrl core from poking at wrong devices.
Fixes: b35cf3b6aa ("PCI/pwrctrl: Add APIs to power on/off pwrctrl devices")
Reported-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
[bhelgaas: split pci_pwrctrl_is_required() move to separate patch]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260421104102.12322-1-manivannan.sadhasivam@oss.qualcomm.com
Move pci_pwrctrl_is_required() earlier in the file so it can be used by
pci_pwrctrl_power_off_device() and pci_pwrctrl_power_on_device().
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
[bhelgaas: split to its own patch]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260421104102.12322-1-manivannan.sadhasivam@oss.qualcomm.com
sriov_restore_vf_rebar_state() uses the VF Resizable BAR Control register
to decide how many VF BARs to restore (nbars) and which VF BAR each
iteration addresses (bar_idx). bar_idx indexes into dev->sriov->barsz[],
which has only PCI_SRIOV_NUM_BARS (6) entries.
When a device does not respond, config reads typically return
PCI_ERROR_RESPONSE (~0). Both fields are 3 bits wide, so nbars and bar_idx
both evaluate to 7. The barsz[] access then goes out of bounds. UBSAN
reports this as:
UBSAN: array-index-out-of-bounds in drivers/pci/iov.c:948:51 index 7 is out of range for type 'resource_size_t [6]'
Observed on an NVIDIA RTX PRO 1000 GPU (GB207GLM) that stopped responding
during a failed GC6 power state exit. The subsequent pci_restore_state()
invoked sriov_restore_vf_rebar_state() while config reads returned
0xffffffff, triggering the splat.
Bail out if any VF Resizable BAR Control read returns PCI_ERROR_RESPONSE.
No further VF BARs are touched, which is safe because a config read that
returns PCI_ERROR_RESPONSE indicates the device is unreachable and
restoration is pointless. This mirrors the guard in
pci_restore_rebar_state().
Fixes: 5a8f77e24a ("PCI/IOV: Restore VF resizable BAR state after reset")
Signed-off-by: Marco Nenciarini <mnencia@kcore.it>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/44a4ae53ec2825816b816c85cd378430d9a95cc6.1776429882.git.mnencia@kcore.it
pci_restore_rebar_state() uses the Resizable BAR Control register to decide
how many BARs to restore (nbars) and which BAR each iteration addresses
(bar_idx).
When a device does not respond, config reads typically return
PCI_ERROR_RESPONSE (~0). Both fields are 3 bits wide, so nbars and bar_idx
both evaluate to 7, past the spec's valid ranges for both fields.
pci_resource_n() then returns an unrelated resource slot, whose size is
used to derive a nonsensical value written back to the Resizable BAR
Control register.
Bail out if any Resizable BAR Control read returns PCI_ERROR_RESPONSE. No
further BARs are touched, which is safe because a config read that returns
PCI_ERROR_RESPONSE indicates the device is unreachable and restoration is
pointless.
Fixes: d3252ace0b ("PCI: Restore resized BAR state on resume")
Signed-off-by: Marco Nenciarini <mnencia@kcore.it>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/666cac19b5daa0ab0e0ab64454e76b4d24465dbd.1776429882.git.mnencia@kcore.it
When a PCI device is unbound from its driver, pci_device_remove() sets the
cached power state in pci_dev->current_state to PCI_UNKNOWN. This was
introduced by commit 2449e06a56 ("PCI: reset pci device state to unknown
state for resume") to invalidate the cached power state in case the system
is subsequently put to sleep.
For bound devices, the cached power state is set to PCI_UNKNOWN in
pci_pm_suspend_noirq(), immediately before entering system sleep.
Extend to unbound devices for consistency.
This obviates the need to change the cached power state on unbind, so stop
doing so.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/af7d11d3ceb231acc90829f7a5c8400c2446744f.1776415510.git.lukas@wunner.de
In C, bitfields are not necessarily safe to modify from multiple
threads without locking. Switch "of_node_reused" over to the "flags"
field so modifications are safe.
Cc: Johan Hovold <johan@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org> # PCI_PWRCTRL
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20260406162231.v5.8.I806b8636cd3724f6cd1f5e199318ab8694472d90@changeid
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
1, Adjust build infrastructure for 32BIT/64BIT;
2, Add HIGHMEM (PKMAP and FIX_KMAP) support;
3, Show and handle CPU vulnerabilites correctly;
4, Batch the icache maintenance for jump_label;
5, Add more atomic instructions support for BPF JIT;
6, Add more features (e.g. fsession) support for BPF trampoline;
7, Some bug fixes and other small changes.
-----BEGIN PGP SIGNATURE-----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=FiFl
-----END PGP SIGNATURE-----
Merge tag 'loongarch-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Adjust build infrastructure for 32BIT/64BIT
- Add HIGHMEM (PKMAP and FIX_KMAP) support
- Show and handle CPU vulnerabilites correctly
- Batch the icache maintenance for jump_label
- Add more atomic instructions support for BPF JIT
- Add more features (e.g. fsession) support for BPF trampoline
- Some bug fixes and other small changes
* tag 'loongarch-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (21 commits)
selftests/bpf: Enable CAN_USE_LOAD_ACQ_STORE_REL for LoongArch
LoongArch: BPF: Add fsession support for trampolines
LoongArch: BPF: Introduce emit_store_stack_imm64() helper
LoongArch: BPF: Support up to 12 function arguments for trampoline
LoongArch: BPF: Support small struct arguments for trampoline
LoongArch: BPF: Open code and remove invoke_bpf_mod_ret()
LoongArch: BPF: Support load-acquire and store-release instructions
LoongArch: BPF: Support 8 and 16 bit read-modify-write instructions
LoongArch: BPF: Add the default case in emit_atomic() and rename it
LoongArch: Define instruction formats for AM{SWAP/ADD}.{B/H} and DBAR
LoongArch: Batch the icache maintenance for jump_label
LoongArch: Add flush_icache_all()/local_flush_icache_all()
LoongArch: Add spectre boundry for syscall dispatch table
LoongArch: Show CPU vulnerabilites correctly
LoongArch: Make arch_irq_work_has_interrupt() true only if IPI HW exist
LoongArch: Use get_random_canary() for stack canary init
LoongArch: Improve the logging of disabling KASLR
LoongArch: Align FPU register state to 32 bytes
LoongArch: Handle CONFIG_32BIT in syscall_get_arch()
LoongArch: Add HIGHMEM (PKMAP and FIX_KMAP) support
...
A number of minor PCMCIA bugfixes and cleanups, and a patch removing
obsolete host controller drivers.
-----BEGIN PGP SIGNATURE-----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=y3cK
-----END PGP SIGNATURE-----
Merge tag 'pcmcia-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux
Pull PCMCIA updates from Dominik Brodowski:
"A number of minor PCMCIA bugfixes and cleanups, and a patch removing
obsolete host controller drivers"
* tag 'pcmcia-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
pcmcia: remove obsolete host controller drivers
pcmcia: Convert to use less arguments in pci_bus_for_each_resource()
PCMCIA: Fix garbled log messages for KERN_CONT
- Add support for CONFIG_PAGE_TABLE_CHECK and enable it in
debug_defconfig. s390 can only tell user from kernel PTEs via the mm,
so mm_struct is now passed into pxx_user_accessible_page() callbacks
- Expose the PCI function UID as an arch-specific slot attribute in
sysfs so a function can be identified by its user-defined id while
still in standby. Introduces a generic ARCH_PCI_SLOT_GROUPS hook in
drivers/pci/slot.c
- Refresh s390 PCI documentation to reflect current behavior and cover
previously undocumented sysfs attributes
- zcrypt device driver cleanup series: consistent field types, clearer
variable naming, a kernel-doc warning fix, and a comment explaining
the intentional synchronize_rcu() in pkey_handler_register()
- Provide an s390 arch_raw_cpu_ptr() that avoids the detour via
get_lowcore() using alternatives, shrinking defconfig by ~27 kB
- Guard identity-base randomization with kaslr_enabled() so nokaslr
keeps the identity mapping at 0 even with
CONFIG_RANDOMIZE_IDENTITY_BASE=y
- Build S390_MODULES_SANITY_TEST as a module only by requiring
KUNIT && m, since built-in would not exercise module loading
- Remove the permanently commented-out HMCDRV_DEV_CLASS create_class()
code in the hmcdrv driver
- Drop stale ident_map_size extern conflicting with asm/page.h
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmno78kACgkQjYWKoQLX
FBiHbggAmW5hPIDf4F8HLomMREaaQb7QAyYwfeefwhcFUXSMu8td8S68aN4UkOnS
DGSFjb+V6Nqd+ewrF7IS9pRU9YFsmBqo3MnLdcJ/ojZFz8BlwoAi+E4AD1a38hY2
9zh2siPBMjydqBRUn6zjsK8auk4e8r44iS5MNNMXDF2ePE/PnPKTm93GhbtnnM6r
a7mQkiPbi6j0sN/UU+pQkhS4fm2XNaGpCGGX0W0v2RdLIYZ9zQQdg4TaEsjQ5wZA
OC3P8LG3OyJjnxsY2J8PIKK0VM0JP67KUGnQOi1y8HbN1LkFfAWF6CK7tsyUE/JM
TYg7ENs2mUMmaa8niOGkiXzjjAxD0g==
=NpmP
-----END PGP SIGNATURE-----
Merge tag 's390-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Add support for CONFIG_PAGE_TABLE_CHECK and enable it in
debug_defconfig. s390 can only tell user from kernel PTEs via the mm,
so mm_struct is now passed into pxx_user_accessible_page() callbacks
- Expose the PCI function UID as an arch-specific slot attribute in
sysfs so a function can be identified by its user-defined id while
still in standby. Introduces a generic ARCH_PCI_SLOT_GROUPS hook in
drivers/pci/slot.c
- Refresh s390 PCI documentation to reflect current behavior and cover
previously undocumented sysfs attributes
- zcrypt device driver cleanup series: consistent field types, clearer
variable naming, a kernel-doc warning fix, and a comment explaining
the intentional synchronize_rcu() in pkey_handler_register()
- Provide an s390 arch_raw_cpu_ptr() that avoids the detour via
get_lowcore() using alternatives, shrinking defconfig by ~27 kB
- Guard identity-base randomization with kaslr_enabled() so nokaslr
keeps the identity mapping at 0 even with RANDOMIZE_IDENTITY_BASE=y
- Build S390_MODULES_SANITY_TEST as a module only by requiring KUNIT &&
m, since built-in would not exercise module loading
- Remove the permanently commented-out HMCDRV_DEV_CLASS create_class()
code in the hmcdrv driver
- Drop stale ident_map_size extern conflicting with asm/page.h
* tag 's390-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: Fix warning about wrong kernel doc comment
PCI: s390: Expose the UID as an arch specific PCI slot attribute
docs: s390/pci: Improve and update PCI documentation
s390/pkey: Add comment about synchronize_rcu() to pkey base
s390/hmcdrv: Remove commented out code
s390/zcrypt: Slight rework on the agent_id field
s390/zcrypt: Explicitly use a card variable in _zcrypt_send_cprb
s390/zcrypt: Rework MKVP fields and handling
s390/zcrypt: Make apfs a real unsigned int field
s390/zcrypt: Rework domain processing within zcrypt device driver
s390/zcrypt: Move inline function rng_type6cprb_msgx from header to code
s390/percpu: Provide arch_raw_cpu_ptr()
s390: Enable page table check for debug_defconfig
s390/pgtable: Add s390 support for page table check
s390/pgtable: Use set_pmd_bit() to invalidate PMD entry
mm/page_table_check: Pass mm_struct to pxx_user_accessible_page()
s390/boot: Respect kaslr_enabled() for identity randomization
s390/Kconfig: Make modules sanity test a module-only option
s390/setup: Drop stale ident_map_size declaration
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmnobFATHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXhafB/wMvf8yu4FgapbSRIlPboeW/ONDyuHd
k0y1a0IFMQLspWfCxK8+snEcHT3g9xzG3ksqcnac0SPgzqxQ4dlK/c7Xr+5EBXuf
TEt/bHrt6KT5BUpb1k/XxcdoObCsvZd3vfqR020OsHijw1Ni9PrdqeZxk56/vFJs
nvgyKvsrAEyfALOH1Vgwg0gNWpqJBj1KcT3Kl1o4p5lwQzVpUREZii6RyvgXT/pu
mckN63FrEPOpDaJllHmCPcfFSzqNi+wFQcFxm35w9rDQsVdnMsRWoJbcXNYW5QGM
+KOZ1/tzw4Z3queW78hcxsH6sXiElLDsJgtDohBhxbVvUXy+xHrJCOm5
=4Ke3
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20260421' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V updates from Wei Liu:
- Fix cross-compilation for hv tools (Aditya Garg)
- Fix vmemmap_shift exceeding MAX_FOLIO_ORDER in mshv_vtl (Naman Jain)
- Limit channel interrupt scan to relid high water mark (Michael
Kelley)
- Export hv_vmbus_exists() and use it in pci-hyperv (Dexuan Cui)
- Fix cleanup and shutdown issues for MSHV (Jork Loeser)
- Introduce more tracing support for MSHV (Stanislav Kinsburskii)
* tag 'hyperv-next-signed-20260421' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Skip LP/VP creation on kexec
x86/hyperv: move stimer cleanup to hv_machine_shutdown()
Drivers: hv: vmbus: fix hyperv_cpuhp_online variable shadowing
mshv: Add tracepoint for GPA intercept handling
mshv_vtl: Fix vmemmap_shift exceeding MAX_FOLIO_ORDER
tools: hv: Fix cross-compilation
Drivers: hv: vmbus: Export hv_vmbus_exists() and use it in pci-hyperv
mshv: Introduce tracing support
Drivers: hv: vmbus: Limit channel interrupt scan to relid high water mark
Adjust build infrastructure (Kconfig, Makefile and ld scripts) to let
us enable both 32BIT/64BIT kernel build.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
-----BEGIN PGP SIGNATURE-----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=FFRz
-----END PGP SIGNATURE-----
Merge tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Allow TLP Processing Hints to be enabled for RCiEPs (George Abraham
P)
- Enable AtomicOps only if we know the Root Port supports them (Gerd
Bayer)
- Don't enable AtomicOps for RCiEPs since none of them need Atomic
Ops and we can't tell whether the Root Complex would support them
(Gerd Bayer)
- Leave Precision Time Measurement disabled until a driver enables it
to avoid PCIe errors (Mika Westerberg)
- Make pci_set_vga_state() fail if bridge doesn't support VGA
routing, i.e., PCI_BRIDGE_CTL_VGA is not writable, and return
errors to vga_get() callers including userspace via
/dev/vga_arbiter (Simon Richter)
- Validate max-link-speed from DT in j721e, brcmstb, mediatek-gen3,
rzg3s drivers (where the actual controller constraints are known),
and remove validation from the generic OF DT accessor (Hans Zhang)
- Remove pc110pad driver (no longer useful after 486 CPU support
removed) and no_pci_devices() (pc110pad was the last user) (Dmitry
Torokhov, Heiner Kallweit)
Resource management:
- Prevent assigning space to unimplemented bridge windows; previously
we mistakenly assumed prefetchable window existed and assigned
space and put a BAR there (Ahmed Naseef)
- Avoid shrinking bridge windows to fit in the initial Root Port
window; fixes one problem with devices with large BARs connected
via switches, e.g., Thunderbolt (Ilpo Järvinen)
- Pass full extent of empty space, not just the aligned space, to
resource_alignf callback so free space before the requested
alignment can be used (Ilpo Järvinen)
- Place small resources before larger ones for better utilization of
address space (Ilpo Järvinen)
- Fix alignment calculation for resource size larger than align,
e.g., bridge windows larger than the 1MB required alignment (Ilpo
Järvinen)
Reset:
- Update slot handling so all ARI functions are treated as being in
the same slot. They're all reset by Secondary Bus Reset, but
previously drivers of ARI functions that appeared to be on a
non-zero device weren't notified and fatal hardware errors could
result (Keith Busch)
- Make sysfs reset_subordinate hotplug safe to avoid spurious hotplug
events (Keith Busch)
- Hide Secondary Bus Reset ('bus') from sysfs reset_methods if masked
by CXL because it has no effect (Vidya Sagar)
- Avoid FLR for AMD NPU device, where it causes the device to hang
(Lizhi Hou)
Error handling:
- Clear only error bits in PCIe Device Status to avoid accidentally
clearing Emergency Power Reduction Detected (Shuai Xue)
- Check for AER errors even in devices without drivers (Lukas Wunner)
- Initialize ratelimit info so DPC and EDR paths log AER error
information (Kuppuswamy Sathyanarayanan)
Power control:
- Add UPD720201/UPD720202 USB 3.0 xHCI Host Controller .compatible so
generic pwrctrl driver can control it (Neil Armstrong)
Hotplug:
- Set LED_HW_PLUGGABLE for NPEM hotplug-capable ports so LED core
doesn't complain when setting brightness fails because the endpoint
is gone (Richard Cheng)
Peer-to-peer DMA:
- Allow wildcards in list of host bridges that support peer-to-peer
DMA between hierarchy domains and add all Google SoCs (Jacob
Moroni)
Endpoint framework:
- Advertise dynamic inbound mapping support in pci-epf-test and
update host pci_endpoint_test to skip doorbell testing if not
advertised by endpoint (Koichiro Den)
- Return 0, not remaining timeout, when MHI eDMA ops complete so
mhi_ep_ring_add_element() doesn't interpret non-zero as failure
(Daniel Hodges)
- Remove vntb and ntb duplicate resource teardown that leads to oops
when .allow_link() fails or .drop_link() is called (Koichiro Den)
- Disable vntb delayed work before clearing BAR mappings and
doorbells to avoid oops caused by doing the work after resources
have been torn down (Koichiro Den)
- Add a way to describe reserved subregions within BARs, e.g.,
platform-owned fixed register windows, and use it for the RK3588
BAR4 DMA ctrl window (Koichiro Den)
- Add BAR_DISABLED for BARs that will never be available to an EPF
driver, and change some BAR_RESERVED annotations to BAR_DISABLED
(Niklas Cassel)
- Add NTB .get_dma_dev() callback for cases where DMA API requires a
different device, e.g., vNTB devices (Koichiro Den)
- Add reserved region types for MSI-X Table and PBA so Endpoint
controllers can them as describe hardware-owned regions in a
BAR_RESERVED BAR (Manikanta Maddireddy)
- Make Tegra194/234 BAR0 programmable and remove 1MB size limit
(Manikanta Maddireddy)
- Expose Tegra BAR2 (MSI-X) and BAR4 (DMA) as 64-bit BAR_RESERVED
(Manikanta Maddireddy)
- Add Tegra194 and Tegra234 device table entries to pci_endpoint_test
(Manikanta Maddireddy)
- Skip the BAR subrange selftest if there are not enough inbound
window resources to run the test (Christian Bruel)
New native PCIe controller drivers:
- Add DT binding and driver for Andes QiLai SoC PCIe host controller
(Randolph Lin)
- Add DT binding and driver for ESWIN PCIe Root Complex (Senchuan
Zhang)
Baikal T-1 PCIe controller driver:
- Remove driver since it never quite became usable (Andy Shevchenko)
Cadence PCIe controller driver:
- Implement byte/word config reads with dword (32-bit) reads because
some Cadence controllers don't support sub-dword accesses (Aksh
Garg)
CIX Sky1 PCIe controller driver:
- Add 'power-domains' to DT binding for SCMI power domain (Gary Yang)
Freescale i.MX6 PCIe controller driver:
- Add i.MX94 and i.MX943 to fsl,imx6q-pcie-ep DT binding (Richard
Zhu)
- Delay instead of polling for L2/L3 Ready after PME_Turn_off when
suspending i.MX6SX because LTSSM registers are inaccessible
(Richard Zhu)
- Separate PERST# assertion (for resetting endpoints) from core reset
(for resetting the RC itself) to prepare for new DTs with PERST#
GPIO in per-Root Port nodes (Sherry Sun)
- Retain Root Port MSI capability on i.MX7D, i.MX8MM, and i.MX8MQ so
MSI from downstream devices will work (Richard Zhu)
- Fix i.MX95 reference clock source selection when internal refclk is
used (Franz Schnyder)
Freescale Layerscape PCIe controller driver:
- Allow building as a removable module (Sascha Hauer)
MediaTek PCIe Gen3 controller driver:
- Use dev_err_probe() to simplify error paths and make deferred probe
messages visible in /sys/kernel/debug/devices_deferred (Chen-Yu
Tsai)
- Power off device if setup fails (Chen-Yu Tsai)
- Integrate new pwrctrl API to enable power control for WiFi/BT
adapters on mainboard or in PCIe or M.2 slots (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Poll less aggressively and non-atomically for PME_TO_Ack during
transition to L2 (Vidya Sagar)
- Disable LTSSM after transition to Detect on surprise link down to
stop toggling between Polling and Detect (Manikanta Maddireddy)
- Don't force the device into the D0 state before L2 when suspending
or shutting down the controller (Vidya Sagar)
- Disable PERST# IRQ only in Endpoint mode because it's not
registered in Root Port mode (Manikanta Maddireddy)
- Handle 'nvidia,refclk-select' as optional (Vidya Sagar)
- Disable direct speed change in Endpoint mode so link speed change
is controlled by the host (Vidya Sagar)
- Set LTR values before link up to avoid bogus LTR messages with 0
latency (Vidya Sagar)
- Allow system suspend when the Endpoint link is down (Vidya Sagar)
- Use DWC IP core version, not Tegra custom values, to avoid DWC core
version check warnings (Manikanta Maddireddy)
- Apply ECRC workaround to devices based on DesignWare 5.00a as well
as 4.90a (Manikanta Maddireddy)
- Disable PM Substate L1.2 in Endpoint mode to work around Tegra234
erratum (Vidya Sagar)
- Delay post-PERST# cleanup until core is powered on to avoid CBB
timeout (Manikanta Maddireddy)
- Assert CLKREQ# so switches that forward it to their downstream side
can bring up those links successfully (Vidya Sagar)
- Calibrate pipe to UPHY for Endpoint mode to reset stale PLL state
from any previous bad link state (Vidya Sagar)
- Remove IRQF_ONESHOT flag from Endpoint interrupt registration so
DMA driver and Endpoint controller driver can share the interrupt
line (Vidya Sagar)
- Enable DMA interrupt to support DMA in both Root Port and Endpoint
modes (Vidya Sagar)
- Enable hardware link retraining after link goes down in Endpoint
mode (Vidya Sagar)
- Add DT binding and driver support for core clock monitoring (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Advertise 'Hot-Plug Capable' and set 'No Command Completed Support'
since Qcom Root Ports support hotplug events like DL_Up/Down and
can accept writes to Slot Control without delays between writes
(Krishna Chaitanya Chundru)
Renesas R-Car PCIe controller driver:
- Mark Endpoint BAR0 and BAR2 as Resizable (Koichiro Den)
- Reduce EPC BAR alignment requirement to 4K (Koichiro Den)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/G3E to DT binding and to driver (John Madieu)
- Assert (not deassert) resets in probe error path (John Madieu)
- Assert resets in suspend path in reverse order they were deasserted
during probe (John Madieu)
- Rework inbound window algorithm to prevent mapping more than
intended region and enforce alignment on size, to prepare for
RZ/G3E support (John Madieu)
Rockchip DesignWare PCIe controller driver:
- Add tracepoints for PCIe controller LTSSM transitions and link rate
changes (Shawn Lin)
- Trace LTSSM events collected by the dw-rockchip debug FIFO (Shawn
Lin)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2042 PCIe Root Ports that
advertise support for them (Yao Zi)
Synopsys DesignWare PCIe controller driver:
- Continue with system suspend even if an Endpoint doesn't respond
with PME_TO_Ack message (Manivannan Sadhasivam)
- Set Endpoint MSI-X Table Size in the correct function of a
multi-function device when configuring MSI-X, not in Function 0
(Aksh Garg)
- Set Max Link Width and Max Link Speed for all functions of a
multi-function device, not just Function 0 (Aksh Garg)
- Expose PCIe event counters in groups 5-7 in debugfs (Hans Zhang)
Miscellaneous:
- Warn only once about invalid ACS kernel parameter format (Richard
Cheng)
- Suppress FW_BUG warning when writing sysfs 'numa_node' with the
current value (Li RongQing)
- Drop redundant 'depends on PCI' from Kconfig (Julian Braha)"
* tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (165 commits)
PCI/P2PDMA: Add Google SoCs to the P2P DMA host bridge list
PCI/P2PDMA: Allow wildcard Device IDs in host bridge list
PCI: sg2042: Avoid L0s and L1 on Sophgo 2042 PCIe Root Ports
PCI: cadence: Add flags for disabling ASPM capability for broken Root Ports
PCI: tegra194: Add core monitor clock support
dt-bindings: PCI: tegra194: Add monitor clock support
PCI: tegra194: Enable hardware hot reset mode in Endpoint mode
PCI: tegra194: Enable DMA interrupt
PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration
PCI: tegra194: Calibrate pipe to UPHY for Endpoint mode
PCI: tegra194: Assert CLKREQ# explicitly by default
PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
PCI: tegra194: Disable L1.2 capability of Tegra234 EP
PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well
PCI: tegra194: Use DWC IP core version
PCI: tegra194: Free up Endpoint resources during remove()
PCI: tegra194: Allow system suspend when the Endpoint link is not up
PCI: tegra194: Set LTR message request before PCIe link up in Endpoint mode
PCI: tegra194: Disable direct speed change for Endpoint mode
PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"
...
With commit f84b21da36 ("PCI: hv: Don't load the driver for baremetal root partition"),
the bare metal Linux root partition won't use the pci-hyperv driver, but
when a Linux VM runs on the Linux root partition, pci-hyperv's module_init
function init_hv_pci_drv() can still run, e.g. in the case of
CONFIG_PCI_HYPERV=y, even if the VMBus driver is not used in such a VM
(i.e. the hv_vmbus driver's init function returns -ENODEV due to
vmbus_root_device being NULL).
In such a Linux VM, init_hv_pci_drv() runs with a side effect: the 3
hvpci_block_ops callbacks are set to functions that depend on hv_vmbus.
Later, when the MLX driver in such a VM invokes the callbacks, e.g. in
drivers/net/ethernet/mellanox/mlx5/core/lib/hv.c:
mlx5_hv_register_invalidate(), hvpci_block_ops.reg_blk_invalidate() is
hv_register_block_invalidate() rather than a NULL function pointer, and
hv_register_block_invalidate() assumes that it can find a struct
hv_pcibus_device from pdev->bus->sysdata, which is false in such a VM.
Consequently, hv_register_block_invalidate() -> get_pcichild_wslot() ->
spin_lock_irqsave() may hang since it can be accessing an invalid
spinlock pointer.
Fix the issue by exporting hv_vmbus_exists() and using it in pci-hyperv:
hv_root_partition() is true and hv_nested is false ==>
hv_vmbus_exists() is false.
hv_root_partition() is true and hv_nested is true ==>
hv_vmbus_exists() is true.
hv_root_partition() is false ==> hv_vmbus_exists() is true.
While at it, rename vmbus_exists() to hv_vmbus_exists() to follow the
convention that all public functions have the hv_ prefix; also change
the return value's type from int to bool to make the code more readable;
also move the two pr_info() calls.
Reported-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
- Update maintainers information regarding ACPICA (Rafael Wysocki)
- Replace strncpy() with strscpy_pad() in acpi_ut_safe_strncpy() (Kees
Cook)
- Trigger an ordered system power off after encountering a fatal error
operator in AML (Armin Wolf)
- Enable ACPI FPDT parsing on LoongArch (Xi Ruoyao)
- Remove the temporary stop-gap acpi_pptt_cache_v1_full structure from
the ACPI PPTT parser (Ben Horgan)
- Add support for exposing ACPI FPDT subtables FBPT and S3PT (Nate
DeSimone)
- Address multiple assorted issues and clean up the code in the ACPI
processor idle driver (Huisong Li)
- Replace strlcat() in the ACPI processor idle drive with a better
alternative (Andy Shevchenko)
- Rearrange and clean up acpi_processor_errata_piix4() (Rafael Wysocki)
- Move reference performance to capabilities and fix an uninitialized
variable in the ACPI CPPC library (Pengjie Zhang)
- Add support for the Performance Limited Register to the ACPI CPPC
library (Sumit Gupta)
- Add cppc_get_perf() API to read performance controls, extend
cppc_set_epp_perf() for FFH/SystemMemory, and make the ACPI CPPC
library warn on missing mandatory DESIRED_PERF register (Sumit Gupta)
- Modify the cpufreq CPPC driver to update MIN_PERF/MAX_PERF in target
callbacks to allow it to control performance bounds via standard
scaling_min_freq and scaling_max_freq sysfs attributes and add sysfs
documentation for the Performance Limited Register to it (Sumit Gupta)
- Add ACPI support to the platform device interface in the CMOS RTC
driver, make the ACPI core device enumeration code create a platform
device for the CMOS RTC, and drop CMOS RTC PNP device support (Rafael
Wysocki)
- Consolidate the x86-specific CMOS RTC handling with the ACPI TAD
driver and clean up the CMOS RTC ACPI address space handler (Rafael
Wysocki)
- Enable ACPI alarm in the CMOS RTC driver if advertised in ACPI FADT
and allow that driver to work without a dedicated IRQ if the ACPI
alarm is used (Rafael Wysocki)
- Clean up the ACPI TAD driver in various ways and add an RTC class
device interface, including both the RTC setting/reading and alarm
timer support, to it (Rafael Wysocki)
- Clean up the ACPI AC and ACPI PAD (processor aggregator device)
drivers (Rafael Wysocki)
- Rework checking for duplicate video bus devices and consolidate
pnp.bus_id workarounds handling in the ACPI video bus driver (Rafael
Wysocki)
- Update the ACPI core device drivers to stop setting acpi_device_name()
unnecessarily (Rafael Wysocki)
- Rearrange code using acpi_device_class() in the ACPI core device
drivers and update them to stop setting acpi_device_class()
unnecessarily (Rafael Wysocki)
- Define ACPI_AC_CLASS in one place (Rafael Wysocki)
- Convert the ni903x_wdt watchdog driver and the xen ACPI PAD driver to
bind to platform devices instead of ACPI devices (Rafael Wysocki)
- Add devm_ghes_register_vendor_record_notifier(), use it in the PCI
hisi driver, and Add NVIDIA vendor CPER record handler (Kai-Heng
Feng)
- Consolidate the interface for obtaining a CPU UID from ACPI across
architectures and use it to address incorrect PCI TPH Steering Tag
on ARM64 resulting from the invalid assumption that the ACPI
Processor UID would always be the same as the corresponding logical
CPU ID in Linux (Chengwen Feng)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmnY/bcSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1chAH/1cGRzh9lSgQ3ZdzIIA5rpRtwKC+CTNz
iNDvQ97W73B2N+WYzMaloOh+ZVA1Vdqc+8921aH6HI+v7wtg/ZV3h/hU7TagHNY/
bRFDYaeRXVj4aBXNfoVdn7G5UU9j/kIDcV25I2ubOBqZaO6T5p8p1BK0j0vEj+sG
yR7XwpEhr2OUQwlIFGKskJwFaH57QJXPEY8wf+o+lMEx/7o/JQRJzKFwsYu01ZZV
kQy9Ee08P/rsNJwU2ibmZu5P3JMnhategAT8VAMBvkfLScv2sKX+1Vz19NGXzm71
ARaT7y8MSPNb7SAvWmNZ/rVYrYIL+D3a76Gd7MOGrbVWEn6oXIbCIhY=
=6vEK
-----END PGP SIGNATURE-----
Merge tag 'acpi-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support updates from Rafael Wysocki:
"These include an update of the CMOS RTC driver and the related ACPI
and x86 code that, among other things, switches it over to using the
platform device interface for device binding on x86 instead of the PNP
device driver interface (which allows the code in question to be
simplified quite a bit), a major update of the ACPI Time and Alarm
Device (TAD) driver adding an RTC class device interface to it, and
updates of core ACPI drivers that remove some unnecessary and not
really useful code from them.
Apart from that, two drivers are converted to using the platform
driver interface for device binding instead of the ACPI driver one,
which is slated for removal, support for the Performance Limited
register is added to the ACPI CPPC library and there are some
janitorial updates of it and the related cpufreq CPPC driver, the ACPI
processor driver is fixed and cleaned up, and NVIDIA vendor CPER
record handler is added to the APEI GHES code.
Also, the interface for obtaining a CPU UID from ACPI is consolidated
across architectures and used for fixing a problem with the PCI TPH
Steering Tag on ARM64, there are two updates related to ACPICA, a
minor ACPI OS Services Layer (OSL) update, and a few assorted updates
related to ACPI tables parsing.
Specifics:
- Update maintainers information regarding ACPICA (Rafael Wysocki)
- Replace strncpy() with strscpy_pad() in acpi_ut_safe_strncpy()
(Kees Cook)
- Trigger an ordered system power off after encountering a fatal
error operator in AML (Armin Wolf)
- Enable ACPI FPDT parsing on LoongArch (Xi Ruoyao)
- Remove the temporary stop-gap acpi_pptt_cache_v1_full structure
from the ACPI PPTT parser (Ben Horgan)
- Add support for exposing ACPI FPDT subtables FBPT and S3PT (Nate
DeSimone)
- Address multiple assorted issues and clean up the code in the ACPI
processor idle driver (Huisong Li)
- Replace strlcat() in the ACPI processor idle drive with a better
alternative (Andy Shevchenko)
- Rearrange and clean up acpi_processor_errata_piix4() (Rafael
Wysocki)
- Move reference performance to capabilities and fix an uninitialized
variable in the ACPI CPPC library (Pengjie Zhang)
- Add support for the Performance Limited Register to the ACPI CPPC
library (Sumit Gupta)
- Add cppc_get_perf() API to read performance controls, extend
cppc_set_epp_perf() for FFH/SystemMemory, and make the ACPI CPPC
library warn on missing mandatory DESIRED_PERF register (Sumit
Gupta)
- Modify the cpufreq CPPC driver to update MIN_PERF/MAX_PERF in
target callbacks to allow it to control performance bounds via
standard scaling_min_freq and scaling_max_freq sysfs attributes and
add sysfs documentation for the Performance Limited Register to it
(Sumit Gupta)
- Add ACPI support to the platform device interface in the CMOS RTC
driver, make the ACPI core device enumeration code create a
platform device for the CMOS RTC, and drop CMOS RTC PNP device
support (Rafael Wysocki)
- Consolidate the x86-specific CMOS RTC handling with the ACPI TAD
driver and clean up the CMOS RTC ACPI address space handler (Rafael
Wysocki)
- Enable ACPI alarm in the CMOS RTC driver if advertised in ACPI FADT
and allow that driver to work without a dedicated IRQ if the ACPI
alarm is used (Rafael Wysocki)
- Clean up the ACPI TAD driver in various ways and add an RTC class
device interface, including both the RTC setting/reading and alarm
timer support, to it (Rafael Wysocki)
- Clean up the ACPI AC and ACPI PAD (processor aggregator device)
drivers (Rafael Wysocki)
- Rework checking for duplicate video bus devices and consolidate
pnp.bus_id workarounds handling in the ACPI video bus driver
(Rafael Wysocki)
- Update the ACPI core device drivers to stop setting
acpi_device_name() unnecessarily (Rafael Wysocki)
- Rearrange code using acpi_device_class() in the ACPI core device
drivers and update them to stop setting acpi_device_class()
unnecessarily (Rafael Wysocki)
- Define ACPI_AC_CLASS in one place (Rafael Wysocki)
- Convert the ni903x_wdt watchdog driver and the xen ACPI PAD driver
to bind to platform devices instead of ACPI devices (Rafael
Wysocki)
- Add devm_ghes_register_vendor_record_notifier(), use it in the PCI
hisi driver, and Add NVIDIA vendor CPER record handler (Kai-Heng
Feng)
- Consolidate the interface for obtaining a CPU UID from ACPI across
architectures and use it to address incorrect PCI TPH Steering Tag
on ARM64 resulting from the invalid assumption that the ACPI
Processor UID would always be the same as the corresponding logical
CPU ID in Linux (Chengwen Feng)"
* tag 'acpi-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (73 commits)
ACPICA: Update maintainers information
watchdog: ni903x_wdt: Convert to a platform driver
ACPI: PAD: xen: Convert to a platform driver
ACPI: processor: idle: Reset cpuidle on C-state list changes
cpuidle: Extract and export no-lock variants of cpuidle_unregister_device()
PCI/TPH: Pass ACPI Processor UID to Cache Locality _DSM
ACPI: PPTT: Use acpi_get_cpu_uid() and remove get_acpi_id_for_cpu()
perf: arm_cspmu: Switch to acpi_get_cpu_uid() from get_acpi_id_for_cpu()
ACPI: Centralize acpi_get_cpu_uid() declaration in include/linux/acpi.h
x86/acpi: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
RISC-V: ACPI: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
LoongArch: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
arm64: acpi: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
ACPI: APEI: GHES: Add NVIDIA vendor CPER record handler
PCI: hisi: Use devm_ghes_register_vendor_record_notifier()
ACPI: APEI: GHES: Add devm_ghes_register_vendor_record_notifier()
ACPI: tables: Enable FPDT on LoongArch
ACPI: processor: idle: Fix NULL pointer dereference in hotplug path
ACPI: processor: idle: Reset power_setup_done flag on initialization failure
ACPI: TAD: Add alarm support to the RTC class device interface
...
- debugfs:
- Fix NULL pointer dereference in debugfs_create_str()
- Fix misplaced EXPORT_SYMBOL_GPL for debugfs_create_str()
- Fix soundwire debugfs NULL pointer dereference from uninitialized
firmware_file
- device property:
- Make fwnode flags modifications thread safe; widen the field to
unsigned long and use set_bit() / clear_bit() based accessors
- Document how to check for the property presence
- devres:
- Separate struct devres_node from its "subclasses" (struct devres,
struct devres_group); give struct devres_node its own release and
free callbacks for per-type dispatch
- Introduce struct devres_action for devres actions, avoiding the
ARCH_DMA_MINALIGN alignment overhead of struct devres
- Export struct devres_node and its init/add/remove/dbginfo
primitives for use by Rust Devres<T>
- Fix missing node debug info in devm_krealloc()
- Use guard(spinlock_irqsave) where applicable; consolidate unlock
paths in devres_release_group()
- driver_override:
- Convert PCI, WMI, vdpa, s390/cio, s390/ap, and fsl-mc to the
generic driver_override infrastructure, replacing per-bus
driver_override strings, sysfs attributes, and match logic; fixes
a potential UAF from unsynchronized access to driver_override in
bus match() callbacks
- Simplify __device_set_driver_override() logic
- kernfs:
- Send IN_DELETE_SELF and IN_IGNORED inotify events on kernfs
file and directory removal
- Add corresponding selftests for memcg
- platform:
- Allow attaching software nodes when creating platform devices via
a new 'swnode' field in struct platform_device_info
- Add kerneldoc for struct platform_device_info
- software node:
- Move software node initialization from postcore_initcall() to
driver_init(), making it available early in the boot process
- Move kernel_kobj initialization (ksysfs_init) earlier to support
the above
- Remove software_node_exit(); dead code in a built-in unit
- SoC:
- Introduce of_machine_read_compatible() and of_machine_read_model()
OF helpers and export soc_attr_read_machine() to replace direct
accesses to of_root from SoC drivers; also enables
CONFIG_COMPILE_TEST coverage for these drivers
- sysfs:
- Constify attribute group array pointers to
'const struct attribute_group *const *' in sysfs functions,
device_add_groups() / device_remove_groups(), and struct class
- Rust:
- Devres:
- Embed struct devres_node directly in Devres<T> instead of going
through devm_add_action(), avoiding the extra allocation and
the unnecessary ARCH_DMA_MINALIGN alignment
- I/O:
- Turn IoCapable from a marker trait into a functional trait
carrying the raw I/O accessor implementation (io_read /
io_write), providing working defaults for the per-type Io
methods
- Add RelaxedMmio wrapper type, making relaxed accessors usable
in code generic over the Io trait
- Remove overloaded per-type Io methods and per-backend macros
from Mmio and PCI ConfigSpace
- I/O (Register):
- Add IoLoc trait and generic read/write/update methods to the Io
trait, making I/O operations parameterizable by typed locations
- Add register! macro for defining hardware register types with
typed bitfield accessors backed by Bounded values; supports
direct, relative, and array register addressing
- Add write_reg() / try_write_reg() and LocatedRegister trait
- Update PCI sample driver to demonstrate the register! macro
Example:
```
register! {
/// UART control register.
CTRL(u32) @ 0x18 {
/// Receiver enable.
19:19 rx_enable => bool;
/// Parity configuration.
14:13 parity ?=> Parity;
}
/// FIFO watermark and counter register.
WATER(u32) @ 0x2c {
/// Number of datawords in the receive FIFO.
26:24 rx_count;
/// RX interrupt threshold.
17:16 rx_water;
}
}
impl WATER {
fn rx_above_watermark(&self) -> bool {
self.rx_count() > self.rx_water()
}
}
fn init(bar: &pci::Bar<BAR0_SIZE>) {
let water = WATER::zeroed()
.with_const_rx_water::<1>(); // > 3 would not compile
bar.write_reg(water);
let ctrl = CTRL::zeroed()
.with_parity(Parity::Even)
.with_rx_enable(true);
bar.write_reg(ctrl);
}
fn handle_rx(bar: &pci::Bar<BAR0_SIZE>) {
if bar.read(WATER).rx_above_watermark() {
// drain the FIFO
}
}
fn set_parity(bar: &pci::Bar<BAR0_SIZE>, parity: Parity) {
bar.update(CTRL, |r| r.with_parity(parity));
}
```
- IRQ:
- Move 'static bounds from where clauses to trait declarations
for IRQ handler traits
- Misc:
- Enable the generic_arg_infer Rust feature
- Extend Bounded with shift operations, single-bit bool conversion,
and const get()
- Misc:
- Make deferred_probe_timeout default a Kconfig option
- Drop auxiliary_dev_pm_ops; the PM core falls back to driver PM
callbacks when no bus type PM ops are set
- Add conditional guard support for device_lock()
- Add ksysfs.c to the DRIVER CORE MAINTAINERS entry
- Fix kernel-doc warnings in base.h
- Fix stale reference to memory_block_add_nid() in documentation
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCadl5SwAKCRBFlHeO1qrK
LpjDAQCSG3vYznwrngfpmRU5bCB9sdUy/pZiX5px1357+amJkwEA9LgIVQvtHAZW
ZXcQ7Jr+mR3mJEdlatbkWHp3w1VHqAQ=
=y1DV
-----END PGP SIGNATURE-----
Merge tag 'driver-core-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Fix NULL pointer dereference in debugfs_create_str()
- Fix misplaced EXPORT_SYMBOL_GPL for debugfs_create_str()
- Fix soundwire debugfs NULL pointer dereference from uninitialized
firmware_file
device property:
- Make fwnode flags modifications thread safe; widen the field to
unsigned long and use set_bit() / clear_bit() based accessors
- Document how to check for the property presence
devres:
- Separate struct devres_node from its "subclasses" (struct devres,
struct devres_group); give struct devres_node its own release and
free callbacks for per-type dispatch
- Introduce struct devres_action for devres actions, avoiding the
ARCH_DMA_MINALIGN alignment overhead of struct devres
- Export struct devres_node and its init/add/remove/dbginfo
primitives for use by Rust Devres<T>
- Fix missing node debug info in devm_krealloc()
- Use guard(spinlock_irqsave) where applicable; consolidate unlock
paths in devres_release_group()
driver_override:
- Convert PCI, WMI, vdpa, s390/cio, s390/ap, and fsl-mc to the
generic driver_override infrastructure, replacing per-bus
driver_override strings, sysfs attributes, and match logic; fixes a
potential UAF from unsynchronized access to driver_override in bus
match() callbacks
- Simplify __device_set_driver_override() logic
kernfs:
- Send IN_DELETE_SELF and IN_IGNORED inotify events on kernfs file
and directory removal
- Add corresponding selftests for memcg
platform:
- Allow attaching software nodes when creating platform devices via a
new 'swnode' field in struct platform_device_info
- Add kerneldoc for struct platform_device_info
software node:
- Move software node initialization from postcore_initcall() to
driver_init(), making it available early in the boot process
- Move kernel_kobj initialization (ksysfs_init) earlier to support
the above
- Remove software_node_exit(); dead code in a built-in unit
SoC:
- Introduce of_machine_read_compatible() and of_machine_read_model()
OF helpers and export soc_attr_read_machine() to replace direct
accesses to of_root from SoC drivers; also enables
CONFIG_COMPILE_TEST coverage for these drivers
sysfs:
- Constify attribute group array pointers to
'const struct attribute_group *const *' in sysfs functions,
device_add_groups() / device_remove_groups(), and struct class
Rust:
- Devres:
- Embed struct devres_node directly in Devres<T> instead of going
through devm_add_action(), avoiding the extra allocation and the
unnecessary ARCH_DMA_MINALIGN alignment
- I/O:
- Turn IoCapable from a marker trait into a functional trait
carrying the raw I/O accessor implementation (io_read /
io_write), providing working defaults for the per-type Io
methods
- Add RelaxedMmio wrapper type, making relaxed accessors usable in
code generic over the Io trait
- Remove overloaded per-type Io methods and per-backend macros
from Mmio and PCI ConfigSpace
- I/O (Register):
- Add IoLoc trait and generic read/write/update methods to the Io
trait, making I/O operations parameterizable by typed locations
- Add register! macro for defining hardware register types with
typed bitfield accessors backed by Bounded values; supports
direct, relative, and array register addressing
- Add write_reg() / try_write_reg() and LocatedRegister trait
- Update PCI sample driver to demonstrate the register! macro
Example:
```
register! {
/// UART control register.
CTRL(u32) @ 0x18 {
/// Receiver enable.
19:19 rx_enable => bool;
/// Parity configuration.
14:13 parity ?=> Parity;
}
/// FIFO watermark and counter register.
WATER(u32) @ 0x2c {
/// Number of datawords in the receive FIFO.
26:24 rx_count;
/// RX interrupt threshold.
17:16 rx_water;
}
}
impl WATER {
fn rx_above_watermark(&self) -> bool {
self.rx_count() > self.rx_water()
}
}
fn init(bar: &pci::Bar<BAR0_SIZE>) {
let water = WATER::zeroed()
.with_const_rx_water::<1>(); // > 3 would not compile
bar.write_reg(water);
let ctrl = CTRL::zeroed()
.with_parity(Parity::Even)
.with_rx_enable(true);
bar.write_reg(ctrl);
}
fn handle_rx(bar: &pci::Bar<BAR0_SIZE>) {
if bar.read(WATER).rx_above_watermark() {
// drain the FIFO
}
}
fn set_parity(bar: &pci::Bar<BAR0_SIZE>, parity: Parity) {
bar.update(CTRL, |r| r.with_parity(parity));
}
```
- IRQ:
- Move 'static bounds from where clauses to trait declarations for
IRQ handler traits
- Misc:
- Enable the generic_arg_infer Rust feature
- Extend Bounded with shift operations, single-bit bool
conversion, and const get()
Misc:
- Make deferred_probe_timeout default a Kconfig option
- Drop auxiliary_dev_pm_ops; the PM core falls back to driver PM
callbacks when no bus type PM ops are set
- Add conditional guard support for device_lock()
- Add ksysfs.c to the DRIVER CORE MAINTAINERS entry
- Fix kernel-doc warnings in base.h
- Fix stale reference to memory_block_add_nid() in documentation"
* tag 'driver-core-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (67 commits)
bus: fsl-mc: use generic driver_override infrastructure
s390/ap: use generic driver_override infrastructure
s390/cio: use generic driver_override infrastructure
vdpa: use generic driver_override infrastructure
platform/wmi: use generic driver_override infrastructure
PCI: use generic driver_override infrastructure
driver core: make software nodes available earlier
software node: remove software_node_exit()
kernel: ksysfs: initialize kernel_kobj earlier
MAINTAINERS: add ksysfs.c to the DRIVER CORE entry
drivers/base/memory: fix stale reference to memory_block_add_nid()
device property: Document how to check for the property presence
soundwire: debugfs: initialize firmware_file to empty string
debugfs: fix placement of EXPORT_SYMBOL_GPL for debugfs_create_str()
debugfs: check for NULL pointer in debugfs_create_str()
driver core: Make deferred_probe_timeout default a Kconfig option
driver core: simplify __device_set_driver_override() clearing logic
driver core: auxiliary bus: Drop auxiliary_dev_pm_ops
device property: Make modifications of fwnode "flags" thread safe
rust: devres: embed struct devres_node directly
...
- Warn only once about invalid ACS kernel parameter format (Richard Cheng)
- Suppress FW_BUG warning when writing sysfs 'numa_node' with the current
value (Li RongQing)
- Drop redundant 'depends on PCI' from Kconfig (Julian Braha)
* pci/misc:
PCI: Clean up dead code in Kconfig
PCI/sysfs: Suppress FW_BUG warning when NUMA node already matches
PCI: Use pr_warn_once() for ACS parameter parse failure
PCI: of: Reduce severity of missing of_root error message
- Assert (not deassert) resets in probe error path (John Madieu)
- Assert resets in suspend path in reverse order they were deasserted
during probe (John Madieu)
- Rework inbound window algorithm to prevent mapping more than intended
region and enforce alignment on size, to prepare for RZ/G3E support (John
Madieu)
- Fix renesas,r9a08g045s33-pcie 'serr_cor' typo and convert properties from
'description' to 'const' for better validation (John Madieu)
- Add RZ/G3E to DT binding and to driver (John Madieu)
* pci/controller/rzg3s-host:
PCI: rzg3s-host: Add support for RZ/G3E PCIe controller
PCI: rzg3s-host: Add PCIe Gen3 (8.0 GT/s) link speed support
PCI: rzg3s-host: Explicitly set class code for RZ/G3E compatibility
PCI: rzg3s-host: Add SoC-specific configuration and initialization callbacks
PCI: rzg3s-host: Make configuration reset lines optional
PCI: rzg3s-host: Make SYSC register offsets SoC-specific
dt-bindings: PCI: renesas,r9a08g045s33-pcie: Document RZ/G3E SoC
dt-bindings: PCI: renesas,r9a08g045s33-pcie: Fix naming properties
PCI: rzg3s-host: Rework inbound window algorithm for supporting RZ/G3E SoC
PCI: rzg3s-host: Reorder reset assertion during suspend
PCI: rzg3s-host: Fix reset handling in probe error path
# Conflicts:
# drivers/pci/controller/pcie-rzg3s-host.c
- Use dev_err_probe() to simplify error paths and make deferred probe
messages visible in /sys/kernel/debug/devices_deferred (Chen-Yu Tsai)
- Initialize IRQ domains earlier to remove need for cleanup if it fails
(Chen-Yu Tsai)
- Set up controller windows and MSI before bringing the link up to separate
controller init and things related to downstream devices (Chen-Yu Tsai)
- Split out device power up and down helpers (Chen-Yu Tsai)
- Power off device if setup fails (Chen-Yu Tsai)
- Integrate new pwrctrl API to enable power control for WiFi/BT adapters on
mainboard or in PCIe or M.2 slots (Chen-Yu Tsai)
- Prevent leaking IRQ domains when IRQ not found (Chen-Yu Tsai)
* pci/controller/mediatek-gen3:
PCI: mediatek-gen3: Prevent leaking IRQ domains when IRQ not found
PCI: mediatek-gen3: Integrate new pwrctrl API
PCI: mediatek-gen3: Disable device if further setup fails
PCI: mediatek-gen3: Split out device power helpers
PCI: mediatek-gen3: Add error path for resume driver callbacks
PCI: mediatek-gen3: Move controller setup steps before PERST# control
PCI: mediatek-gen3: Move mtk_pcie_setup_irq() out of mtk_pcie_setup()
PCI: mediatek-gen3: Clean up mtk_pcie_parse_port() with dev_err_probe()
- Poll less aggressively and non-atomically for PME_TO_Ack during
transition to L2 (Vidya Sagar)
- Increase LTSSM poll time on surprise link down (Manikanta Maddireddy)
- Disable LTSSM after transition to Detect on surprise link down to stop
toggling between Polling and Detect (Manikanta Maddireddy)
- Don't force the device into the D0 state before L2 when suspending or
shutting down the controller (Vidya Sagar)
- Disable PERST# IRQ only in Endpoint mode because it's not registered in
Root Port mode (Manikanta Maddireddy)
- Handle 'nvidia,refclk-select' as optional (Vidya Sagar)
- Disable direct speed change in Endpoint mode so link speed change is
controlled by the host (Vidya Sagar)
- Set LTR values before link up to avoid bogus LTR messages with 0 latency
(Vidya Sagar)
- Allow system suspend when the Endpoint link is down (Vidya Sagar)
- During remove, free resources allocated during Endpoint .probe() (Vidya
Sagar)
- Use DWC IP core version, not Tegra custom values, to avoid DWC core
version check warnings (Manikanta Maddireddy)
- Apply ECRC workaround to devices based on DesignWare 5.00a as well
as 4.90a (Manikanta Maddireddy)
- Disable PM Substate L1.2 in Endpoint mode to work around Tegra234 erratum
(Vidya Sagar)
- Delay post-PERST# cleanup until core is powered on to avoid CBB timeout
(Manikanta Maddireddy)
- Assert CLKREQ# so switches that forward it to their downstream side can
bring up those links successfully (Vidya Sagar)
- Calibrate pipe to UPHY for Endpoint mode to reset stale PLL state from
any previous bad link state (Vidya Sagar)
- Remove IRQF_ONESHOT flag from Endpoint interrupt registration so DMA
driver and Endpoint controller driver can share the interrupt line (Vidya
Sagar)
- Enable DMA interrupt to support DMA in both Root Port and Endpoint modes
(Vidya Sagar)
- Enable hardware link retraining after link goes down in Endpoint mode
(Vidya Sagar)
- Add DT binding and driver support for core clock monitoring (Vidya Sagar)
* pci/controller/dwc-tegra194:
PCI: tegra194: Add core monitor clock support
dt-bindings: PCI: tegra194: Add monitor clock support
PCI: tegra194: Enable hardware hot reset mode in Endpoint mode
PCI: tegra194: Enable DMA interrupt
PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration
PCI: tegra194: Calibrate pipe to UPHY for Endpoint mode
PCI: tegra194: Assert CLKREQ# explicitly by default
PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
PCI: tegra194: Disable L1.2 capability of Tegra234 EP
PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well
PCI: tegra194: Use DWC IP core version
PCI: tegra194: Free up Endpoint resources during remove()
PCI: tegra194: Allow system suspend when the Endpoint link is not up
PCI: tegra194: Set LTR message request before PCIe link up in Endpoint mode
PCI: tegra194: Disable direct speed change for Endpoint mode
PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"
PCI: tegra194: Disable PERST# IRQ only in Endpoint mode
PCI: tegra194: Don't force the device into the D0 state before L2
PCI: tegra194: Disable LTSSM after transition to Detect on surprise link down
PCI: tegra194: Increase LTSSM poll time on surprise link down
PCI: tegra194: Fix polling delay for L2 state
- Mark BAR0 and BAR2 as Resizable (Koichiro Den)
- Reduce EPC BAR alignment requirement to 4K (Koichiro Den)
* pci/controller/dwc-rcar-gen4-ep:
PCI: dwc: rcar-gen4: Change EPC BAR alignment to 4K as per the documentation
PCI: dwc: rcar-gen4: Mark BAR0 and BAR2 as Resizable BARs in endpoint mode
# Conflicts:
# drivers/pci/controller/dwc/pcie-rcar-gen4.c
- Advertise 'Hot-Plug Capable' and set 'No Command Completed Support' since
Qcom Root Ports support hotplug events like DL_Up/Down and can accept
writes to Slot Control without delays between writes (Krishna Chaitanya
Chundru)
* pci/controller/dwc-qcom:
PCI: qcom: Advertise Hotplug Slot Capability with no Command Completion support
- Allow Layerscape host controller driver to be build as a removable module
(Sascha Hauer)
* pci/controller/dwc-layerscape:
PCI: layerscape: Allow to compile as module
- Fix device node reference leak in imx_pcie_probe() (Felix Gu)
- Delay instead of polling for L2/L3 Ready after PME_Turn_off when
suspending i.MX6SX because LTSSM registers are inaccessible (Richard Zhu)
- Separate PERST# assertion (for resetting endpoints) from core reset (for
resetting the RC itself) to prepare for new DTs with PERST# GPIO in
per-Root Port nodes (Sherry Sun)
- Retain the Root Port MSI capability on i.MX7D, i.MX8MM, and i.MX8MQ so
MSI from downstream devices will work (Richard Zhu)
- Fix the i.MX95 reference clock source selection when internal refclk is
used (Franz Schnyder)
* pci/controller/dwc-imx6:
PCI: imx6: Fix reference clock source selection for i.MX95
PCI: imx6: Keep Root Port MSI capability with iMSI-RX to work around hardware bug
PCI: imx6: Separate PERST# assertion from core reset functions
PCI: imx6: Change imx_pcie_deassert_core_reset() return type to void
PCI: imx6: Skip waiting for L2/L3 Ready on i.MX6SX
PCI: imx6: Fix device node reference leak in imx_pcie_probe()
- Correct the IRQ number logged in INTx error message (Rakuram Eswaran)
* pci/controller/dwc-amd-mdb:
PCI: amd-mdb: Correct IRQ number in INTx error message
- Continue with system suspend even if an Endpoint doesn't respond with
PME_TO_Ack message (Manivannan Sadhasivam)
- Remove the Baikal-T1 controller driver since it never quite became usable
(Andy Shevchenko)
- Set Endpoint MSI-X Table Size in the correct function of a multi-function
device when configuring MSI-X, not in Function 0 (Aksh Garg)
- Set Max Link Width and Max Link Speed for all functions of a
multi-function device, not just Function 0 (Aksh Garg)
- Clean up in the dw_pcie_resume_noirq() error path (Manivannan Sadhasivam)
- Expose PCIe event counters in groups 5-7 in debugfs (Hans Zhang)
- Fix type mismatch for kstrtou32_from_user() in debugfs write functions
(Hans Zhang)
* pci/controller/dwc:
PCI: dwc: Fix type mismatch for kstrtou32_from_user() return value
PCI: dwc: Expose PCIe event counters for groups 5 to 7 over debugfs
PCI: dwc: Perform cleanup in the error path of dw_pcie_resume_noirq()
PCI: dwc: ep: Mirror the max link width and speed fields to all functions
PCI: dwc: ep: Fix MSI-X Table Size configuration in dw_pcie_ep_set_msix()
PCI: dwc: Remove not-going-to-be-supported code for Baikal SoC
PCI: dwc: Proceed with system suspend even if the endpoint doesn't respond with PME_TO_Ack message
- Release ECAM config on probe failure (Felix Gu)
* pci/controller/cadence-sky1:
PCI: sky1: Use boolean true for is_rc field
PCI: sky1: Fix missing cleanup of ECAM config on probe failure
- Add cadence core flags to disable advertising broken ASPM support (Yao
Zi)
- Disable ASPM L0s and L1 on Sophgo 2042 PCIe Root Ports that advertise
support for them (Yao Zi)
* pci/controller/cadence-sg2042:
PCI: sg2042: Avoid L0s and L1 on Sophgo 2042 PCIe Root Ports
PCI: cadence: Add flags for disabling ASPM capability for broken Root Ports
- Implement byte/word config reads with dword (32-bit) reads because some
Cadence controllers don't support sub-dword accesses (Aksh Garg)
* pci/controller/cadence:
PCI: cadence: Use cdns_pcie_read_sz() for byte or word read access
- Add pcie_get_link_speed() to encapsulate and bounds-check
pcie_link_speed[] accesses (Hans Zhang)
- Validate max-link-speed from DT in j721e, brcmstb, mediatek-gen3, rzg3s
(where the actual controller constraints are known), and remove it from
the generic OF DT accessor (Hans Zhang)
* pci/controller/max-link-speed:
PCI: of: Remove max-link-speed generation validation
PCI: controller: Validate max-link-speed
PCI: j721e: Validate max-link-speed from DT
PCI: dwc: Use pcie_get_link_speed() helper for safe array access
PCI: Add pcie_get_link_speed() helper for safe array access
- Free all previously requested IRQs in epf_ntb_db_bar_init_msi_doorbell()
error path (Koichiro Den)
- Free doorbell IRQ in pci-epf-test only if it has actually been requested
(Koichiro Den)
- Discard pointer to doorbell message array after freeing it in
pci_epf_alloc_doorbell() error path (Koichiro Den)
- Advertise dynamic inbound mapping support in pci-epf-test and update host
pci_endpoint_test to skip doorbell testing if not advertised by endpoint
(Koichiro Den)
- Constify configfs item and group operations (Christophe JAILLET)
- Use array_index_nospec() on configfs MW show/store attributes (Koichiro
Den)
- Return -ERANGE (not -EINVAL) for configfs out-of-range MW index (Koichiro
Den)
- Return 0, not remaining timeout, when MHI eDMA ops complete so
mhi_ep_ring_add_element() doesn't interpret non-zero as failure (Daniel
Hodges)
- Remove vntb and ntb duplicate resource teardown that leads to oops when
.allow_link() fails or .drop_link() is called (Koichiro Den)
- Disable vntb delayed work before clearing BAR mappings and doorbells to
avoid oops caused by doing the work after resources have been torn down
(Koichiro Den)
- Fix pci_epf_add_vepf() kernel-doc typo (Alok Tiwari)
- Propagate pci_epf_create() errors to pci_epf_make() callers (Alok Tiwari)
- Remove redundant BAR_RESERVED annotation for the high order part of a
64-bit BAR (Niklas Cassel)
- Add a way to describe reserved subregions within BARs, e.g.,
platform-owned fixed register windows, and use it for the RK3588 BAR4 DMA
ctrl window (Koichiro Den)
- Add BAR_DISABLED for BARs that will never be available to an EPF driver,
and change some BAR_RESERVED annotations to BAR_DISABLED (Niklas Cassel)
- Disable BARs in common code instead of in each glue driver (Niklas
Cassel)
- Advertise reserved BARs in Capabilities so host-side drivers can skip
them (Niklas Cassel)
- Skip reserved BARs in selftests (Niklas Cassel)
- Improve error messages and include device name when available (Manivannan
Sadhasivam)
- Add NTB .get_dma_dev() callback for cases where DMA API requires a
different device, e.g., vNTB devices (Koichiro Den)
- Return -EINVAL, not -ENOSPC, if endpoint test determines the subrange
size is too small (Koichiro Den)
- Add reserved region types for MSI-X Table and PBA so Endpoint controllers
can them as describe hardware-owned regions in a BAR_RESERVED BAR
(Manikanta Maddireddy)
- Make Tegra194/234 BAR0 programmable and remove 1MB size limit (Manikanta
Maddireddy)
- Expose Tegra BAR2 (MSI-X) and BAR4 (DMA) as 64-bit BAR_RESERVED
(Manikanta Maddireddy)
- Add Tegra194 and Tegra234 device table entries to pci_endpoint_test
(Manikanta Maddireddy)
- Skip the BAR subrange selftest if there are not enough inbound window
resources to run the test (Christian Bruel)
* pci/endpoint:
selftests: pci_endpoint: Skip BAR subrange test on -ENOSPC
misc: pci_endpoint_test: Add Tegra194 and Tegra234 device table entries
PCI: tegra194: Expose BAR2 (MSI-X) and BAR4 (DMA) as 64-bit BAR_RESERVED
PCI: tegra194: Make BAR0 programmable and remove 1MB size limit
PCI: endpoint: Add reserved region type for MSI-X Table and PBA
misc: pci_endpoint_test: Use -EINVAL for small subrange size
PCI: endpoint: pci-epf-vntb: Implement .get_dma_dev()
NTB: ntb_transport: Use ntb_get_dma_dev() for DMA buffers
NTB: core: Add .get_dma_dev() callback to ntb_dev_ops
PCI: endpoint: Improve error messages
PCI: endpoint: Print the EPF name in the error log of pci_epf_make()
selftests: pci_endpoint: Skip reserved BARs
misc: pci_endpoint_test: Give reserved BARs a distinct error code
PCI: endpoint: pci-epf-test: Advertise reserved BARs
PCI: dwc: Disable BARs in common code instead of in each glue driver
PCI: dwc: Replace certain BAR_RESERVED with BAR_DISABLED in glue drivers
PCI: endpoint: Introduce pci_epc_bar_type BAR_DISABLED
PCI: dw-rockchip: Describe RK3588 BAR4 DMA ctrl window
PCI: endpoint: Describe reserved subregions within BARs
PCI: endpoint: Allow only_64bit on BAR_RESERVED
PCI: endpoint: Do not mark the BAR succeeding a 64-bit BAR as BAR_RESERVED
PCI: endpoint: Propagate error from pci_epf_create()
PCI: endpoint: Fix typo in pci_epf_add_vepf() kernel-doc
PCI: endpoint: pci-epf-vntb: Stop cmd_handler work in epf_ntb_epc_cleanup
PCI: endpoint: pci-epf-ntb: Remove duplicate resource teardown
PCI: endpoint: pci-epf-vntb: Remove duplicate resource teardown
PCI: epf-mhi: Return 0, not remaining timeout, when eDMA ops complete
PCI: endpoint: pci-epf-vntb: Return -ERANGE for out-of-range MW index
PCI: endpoint: pci-epf-vntb: Use array_index_nospec() on mws_size[] access
PCI: endpoint: Constify struct configfs_item_operations and configfs_group_operations
selftests: pci_endpoint: Skip doorbell test when unsupported
misc: pci_endpoint_test: Gate doorbell test on dynamic inbound mapping
PCI: endpoint: pci-epf-test: Advertise dynamic inbound mapping support
PCI: endpoint: pci-ep-msi: Fix error unwind and prevent double alloc
PCI: endpoint: pci-epf-test: Don't free doorbell IRQ unless requested
PCI: endpoint: pci-epf-vntb: Fix MSI doorbell IRQ unwind
- Return vga_get_uninterruptible() back to userspace in the
/dev/vga_arbiter path so user can tell whether VGA routing was updated
(Simon Richter)
- Make pci_set_vga_state() fail if bridge doesn't support VGA routing,
i.e., PCI_BRIDGE_CTL_VGA is not writable, and return errors up to
vga_get() callers (Simon Richter)
* pci/vga:
PCI/VGA: Fail pci_set_vga_state() if VGA decoding not supported
PCI/VGA: Pass errors from pci_set_vga_state() up
PCI/VGA: Pass vga_get_uninterruptible() errors to userspace
- Prevent assigning space to unimplemented bridge windows; previously we
mistakenly assumed prefetchable window existed and assigned space and put
a BAR there (Ahmed Naseef)
- Avoid shrinking bridge windows to fit in the initial Root Port window;
this fixes one problem with devices with large BARs connected via
switches, e.g., Thunderbolt (Ilpo Järvinen)
- Retain information about optional resources to make assignment during
rescan more likely to succeed (Ilpo Järvinen)
- Add __resource_contains_unbound() for use in finding space for resources
with no address assigned (Ilpo Järvinen)
- Pass full extent of empty space, not just the aligned space, to
resource_alignf callback so free space before the requested alignment can
be used (Ilpo Järvinen)
- Remove unnecessary second alignment from ARM, m68k, MIPS (Ilpo Järvinen)
- Place small resources before larger ones for better utilization of
address space (Ilpo Järvinen)
- Fix alignment calculation for resource size larger than align, e.g.,
bridge windows larger than the 1MB required alignment (Ilpo Järvinen)
* pci/resource:
PCI: Fix alignment calculation for resource size larger than align
PCI: Align head space better
PCI: Rename window_alignment() to pci_min_window_alignment()
parisc/PCI: Clean up align handling
MIPS: PCI: Remove unnecessary second application of align
m68k/PCI: Remove unnecessary second application of align
ARM/PCI: Remove unnecessary second application of align
resource: Rename 'tmp' variable to 'full_avail'
resource: Pass full extent of empty space to resource_alignf callback
resource: Add __resource_contains_unbound() for internal contains checks
PCI: Fix premature removal from realloc_head list during resource assignment
PCI: Prevent shrinking bridge window from its required size
PCI: Prevent assignment to unsupported bridge windows
- Update slot handling so all ARI functions are treated as being in the
same slot. They're all reset by Secondary Bus Reset, but previously
drivers of ARI functions that appeared to be on a non-zero device weren't
notified and fatal hardware errors could result (Keith Busch)
- Make sysfs reset_subordinate hotplug safe to avoid spurious hotplug
events (Keith Busch)
- Consolidate bus iteration across the _lock(), _unlock(), and _trylock()
functions for pci_bus and pci_slot (Ilpo Järvinen)
- Hide Secondary Bus Reset ('bus') from sysfs reset_methods if masked by
CXL because it has no effect (Vidya Sagar)
* pci/reset:
PCI/CXL: Hide SBR from reset_methods if masked by CXL
PCI: Consolidate pci_bus/slot_lock/unlock/trylock()
PCI: Make reset_subordinate hotplug safe
PCI: Allow all bus devices to use the same slot
PCI: Rename __pci_bus_reset() and __pci_slot_reset()
- Rename 'slot' driver to 'generic' since it can handle any device with
individual power control as well as slots (Neil Armstrong)
- Add UPD720201/UPD720202 USB 3.0 xHCI Host Controller .compatible so
generic pwrctrl driver can control it (Neil Armstrong)
* pci/pwrctrl:
PCI/pwrctrl: generic: Add UPD720201/UPD720202 USB 3.0 xHCI Host Controller support
PCI/pwrctrl: generic: Simplify dev_err_probe() usage
PCI/pwrctrl: generic: Rename pci-pwrctrl-slot as generic
- Leave Precision Time Measurement disabled until a driver enables it to
avoid PCIe errors (Mika Westerberg)
* pci/ptm:
PCI/PTM: Do not enable PTM automatically for Root and Switch Upstream Ports
PCI/PTM: Drop pci_enable_ptm() granularity parameter
- Allow wildcards in list of host bridges that support peer-to-peer DMA
between hierarchy domains and add all Google SoCs (Jacob Moroni)
* pci/p2pdma:
PCI/P2PDMA: Add Google SoCs to the P2P DMA host bridge list
PCI/P2PDMA: Allow wildcard Device IDs in host bridge list
- Use for_each_child_of_node_scoped() to simplify iteration over OF
children (Krzysztof Kozlowski)
- Set LED_HW_PLUGGABLE for NPEM hotplug-capable ports so LED core doesn't
complain when setting brightness fails because the endpoint is gone
(Richard Cheng)
* pci/hotplug:
PCI/NPEM: Set LED_HW_PLUGGABLE for hotplug-capable ports
PCI: rpaphp: Simplify with scoped for each OF child loop
PCI: pnv_php: Simplify with scoped for each OF child loop
- Allow TPH to be enabled for RCiEPs (George Abraham P)
- Remove the pc110pad since 486 CPU support is being removed (Dmitry
Torokhov)
- Remove no_pci_devices() since pc110pad was the last remaining user
(Heiner Kallweit)
* pci/enumeration:
PCI: Remove no_pci_devices()
Input: pc110pad - remove driver
PCI/TPH: Allow TPH enable for RCiEPs
- Hold a pci_dev reference during error recovery (Sizhe Liu)
- Initialize ratelimit info so DPC and EDR paths log AER error information
(Kuppuswamy Sathyanarayanan)
* pci/dpc:
PCI/DPC: Log AER error info for DPC/EDR uncorrectable errors
PCI/DPC: Hold pci_dev reference during error recovery
- Don't enable AtomicOps by RCiEPs since none of them need Atomic Ops and
we can't tell whether the Root Complex would support them (Gerd Bayer)
- Enable AtomicOps only if we know the Root Port supports them (Gerd Bayer)
* pci/atomics:
PCI: Update PCIe spec references for AtomicOps
PCI: Enable AtomicOps only if Root Port supports them
PCI: Do not enable AtomicOps by RCiEPs
On s390, an individual PCI function can generally be identified by two
identifiers, the FID and the UID. Which identifier is used depends on
the scope and the platform configuration.
The first identifier, the FID, is always available and identifies a PCI
device uniquely within a machine. The FID may be virtualized by
hypervisors, but on the LPAR level, the machine scope makes it
impossible to create the same configuration based on FIDs on two
different LPARs of the same machine, and difficult to reuse across
machines.
Such matching LPAR configurations are useful, though, allowing
standardized setups and booting a Linux installation on different LPARs.
To this end the UID, or user-defined identifier, was introduced. While
it is only guaranteed to be unique within an LPAR and only if indicated
by firmware, it allows users to replicate PCI device setups.
On s390, which uses a machine hypervisor, a per PCI function hotplug
model is used. The shortcoming with the UID then is, that it is not
visible to the user without first attaching the PCI function and
accessing the "uid" device attribute. The FID, on the other hand, is
used as the slot name and is thus known even with the PCI function in
standby.
Remedy this shortcoming by providing the UID as an attribute on the slot
allowing the user to identify a PCI function based on the UID without
having to first attach it. Do this via a macro mechanism analogous to
what was introduced by commit 265baca69a ("s390/pci: Stop usurping
pdev->dev.groups") for the PCI device attributes.
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci/slot.c
Link: https://lore.kernel.org/r/20260407-uid_slot-v8-2-15ae4409d2ce@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
All Google SoCs support peer-to-peer DMA between Root Ports, so add a
wildcard rule to the host bridge list.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: David Hu <xuehaohu@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://patch.msgid.link/20260409150123.3538444-2-jmoroni@google.com
Currently, the pci_p2pdma_whitelist array requires an exact match for both
Vendor and Device ID. Some hardware vendors support cross bridge
peer-to-peer DMA across their entire silicon lineup, so add support for
wildcard device IDs to avoid the need to continuously update this array.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://patch.msgid.link/20260409150123.3538444-1-jmoroni@google.com
Merge ACPI APEI updates for 7.1-rc1:
- Add devm_ghes_register_vendor_record_notifier(), use it in the PCI
hisi driver, and Add NVIDIA vendor CPER record handler (Kai-Heng
Feng)
* acpi-apei:
ACPI: APEI: GHES: Add NVIDIA vendor CPER record handler
PCI: hisi: Use devm_ghes_register_vendor_record_notifier()
ACPI: APEI: GHES: Add devm_ghes_register_vendor_record_notifier()
Since commit f3ac2ff148 ("PCI/ASPM: Enable all ClockPM and ASPM states
for devicetree platforms") force enables ASPM on all device tree platforms,
the SG2042 Root Ports are breaking as they advertise L0s and L1
capabilities without supporting them.
Set ASPM quirks to disable the L0s and L1 capabilities for the Root Ports
so that these broken link states won't be enabled.
Fixes: 4e27aca488 ("riscv: sophgo: dts: add PCIe controllers for SG2042")
Co-developed-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Yao Zi <me@ziyao.cc>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Han Gao <gaohan@iscas.ac.cn>
Tested-by: Chen Wang <unicorn_wang@outlook.com> # Pioneerbox
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://patch.msgid.link/20260405154154.46829-3-me@ziyao.cc
Add flags for disabling the ASPM L0s/L1 capability for broken Root Ports
by clearing the corresponding bits in Link Capabilities Register through
the local management bus. This allows ASPM to be disabled on platforms
which don't support it.
Signed-off-by: Yao Zi <me@ziyao.cc>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Han Gao <gaohan@iscas.ac.cn>
Tested-by: Chen Wang <unicorn_wang@outlook.com> # Pioneerbox
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://patch.msgid.link/20260405154154.46829-2-me@ziyao.cc
Add support for Tegra PCIe core clock monitoring. Monitoring tracks rate
changes that may occur due to link speed changes and is useful for
detecting core clock changes not initiated by software. Parse the monitor
clock from device tree and enable it when present.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260324191000.1095768-8-mmaddireddy@nvidia.com
When PCIe link goes down, hardware can retrain the link and try to link up.
To enable this feature, program the APPL_CTRL register with hardware hot
reset with immediate LTSSM enable mode when the controller is operating in
endpoint mode.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260324191000.1095768-6-mmaddireddy@nvidia.com
The Tegra PCIe Endpoint controller has a single interrupt line that is
shared between multiple interrupt sources:
1. PCIe link state events (link up, hot reset done)
2. Configuration space events (Bus Master Enable changes)
3. DMA completion events
The interrupt is currently registered with IRQF_ONESHOT, which keeps the
interrupt line masked until the threaded handler completes. That blocks
processing of DMA completion events (and other sources) while the
threaded handler runs.
Removing IRQF_ONESHOT is safe for the following reasons:
1. The hard IRQ handler (tegra_pcie_ep_hard_irq) properly acknowledges and
clears all interrupt status bits in hardware before returning. This
prevents interrupt storms and ensures the interrupt controller can
re-enable the interrupt line immediately.
2. The follow-up commit adds handling in the hard IRQ for DMA completion
events. Dropping IRQF_ONESHOT is required so the line is unmasked
after the hard IRQ returns and those events can be serviced without
being blocked by the threaded handler.
3. The threaded handler (tegra_pcie_ep_irq_thread) only processes link-up
notifications and LTR message sending. These operations don't conflict
with DMA interrupt processing and don't require the interrupt line to
remain masked.
This change enables both DMA driver and Endpoint controller driver to share
the interrupt line without blocking each other.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260324191000.1095768-4-mmaddireddy@nvidia.com
Calibrate 'Pipe to Universal PHY(UPHY)' (P2U) for the Endpoint controller
to request UPHY PLL rate change to 2.5GT/s (Gen 1) during initialization.
This helps to reset stale PLL state from the previous bad link state.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260324191000.1095768-3-mmaddireddy@nvidia.com
The Root Port's CLKREQ# signal is shared with a downstream PCIe switch and
the endpoints behind it. By default, APPL_PINMUX_CLKREQ_OVERRIDE only
overrides the CLKREQ# input to the controller (so REFCLK is enabled
internally); it does not drive the CLKREQ# output pin low. Some PCIe
switches (e.g. Broadcom PCIe Gen4) forward the Root Port's CLKREQ# to their
downstream side and expect it to be driven low for REFCLK, even when the
switch does not support CLK-PM or ASPM-L1SS. Without driving the output
pin low, link-up can fail between the switch and endpoints.
Clear APPL_PINMUX_CLKREQ_DEFAULT_VALUE so the CLKREQ# output pad is
explicitly driven low. That makes the shared CLKREQ# line low on the wire
and avoids link-up issues with such switches.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260324191000.1095768-2-mmaddireddy@nvidia.com
When PERST# is deasserted twice (assert -> deassert -> assert -> deassert),
a CBB (Control Backbone) timeout occurs at DBI register offset 0x8bc
(PCIE_MISC_CONTROL_1_OFF). This happens because pci_epc_deinit_notify()
and dw_pcie_ep_cleanup() are called before reset_control_deassert() powers
on the controller core.
The call chain that causes the timeout:
pex_ep_event_pex_rst_deassert()
pci_epc_deinit_notify()
pci_epf_test_epc_deinit()
pci_epf_test_clear_bar()
pci_epc_clear_bar()
dw_pcie_ep_clear_bar()
__dw_pcie_ep_reset_bar()
dw_pcie_dbi_ro_wr_en() <- Accesses 0x8bc DBI register
reset_control_deassert(pcie->core_rst) <- Core powered on HERE
The DBI registers, including PCIE_MISC_CONTROL_1_OFF (0x8bc), are only
accessible after the controller core is powered on via
reset_control_deassert(pcie->core_rst). Accessing them before this point
results in a CBB timeout because the hardware is not yet operational.
Fix this by moving pci_epc_deinit_notify() and dw_pcie_ep_cleanup() to
after reset_control_deassert(pcie->core_rst), ensuring the controller is
fully powered on before any DBI register accesses occur.
Fixes: 40e2125381 ("PCI: tegra194: Move controller cleanups to pex_ep_event_pex_rst_deassert()")
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260324190755.1094879-15-mmaddireddy@nvidia.com
When Tegra234 is operating in the Endpoint mode with L1.2 enabled, PCIe
link goes down during L1.2 exit. This is because Tegra234 powers up UPHY
PLL immediately without making sure that the REFCLK is stable.
This causes UPHY PLL to fail to lock to the correct frequency and leads to
link going down. There is no hardware fix for this, hence do not advertise
the L1.2 capability in the Endpoint mode.
Fixes: a54e190737 ("PCI: tegra194: Add Tegra234 PCIe support")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260324190755.1094879-14-mmaddireddy@nvidia.com
The ECRC (TLP digest) workaround was originally added for DesignWare
version 4.90a. Tegra234 SoC has 5.00a DWC HW version, which has the same
ATU TD override behaviour, so apply the workaround for 5.00a too.
Fixes: a54e190737 ("PCI: tegra194: Add Tegra234 PCIe support")
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260324190755.1094879-13-mmaddireddy@nvidia.com
Tegra194 PCIe driver used custom version numbers to detect Tegra194 and
Tegra234 IPs. With version detect logic added, version check results in
mismatch warnings:
tegra194-pcie 14100000.pcie: Versions don't match (0000562a != 3536322a)
Use HW version numbers which match to PORT_LOGIC.PCIE_VERSION_OFF in
Tegra194 driver to avoid these kernel warnings.
Fixes: a54e190737 ("PCI: tegra194: Add Tegra234 PCIe support")
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260324190755.1094879-12-mmaddireddy@nvidia.com
Free up the resources during remove() that were acquired by the DesignWare
driver for the Endpoint mode during probe().
Fixes: bb617cbd81 ("PCI: tegra194: Clean up the exit path for Endpoint mode")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260324190755.1094879-11-mmaddireddy@nvidia.com
Host software initiates the L2 sequence. PCIe link is kept in L2 state
during suspend. If Endpoint mode is enabled and the link is up, the
software cannot proceed with suspend. However, when the PCIe Endpoint
driver is probed, but the PCIe link is not up, Tegra can go into suspend
state. So, allow system to suspend in this case.
Fixes: de2bbf2b71 ("PCI: tegra194: Don't allow suspend when Tegra PCIe is in EP mode")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260324190755.1094879-10-mmaddireddy@nvidia.com
LTR message should be sent as soon as the Root Port enables LTR in the
Endpoint mode. So set snoop and no-snoop LTR timing and LTR message request
before the PCIe link comes up, so that the LTR message is sent upstream as
soon as LTR is enabled.
Without programming these values, the Endpoint would send latencies of 0 to
the host, which will be inaccurate.
Fixes: c57247f940 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260324190755.1094879-9-mmaddireddy@nvidia.com
Pre-silicon simulation showed the controller operating in Endpoint mode
initiating link speed change after completing Secondary Bus Reset. Ideally,
the Root Port or the Switch Downstream Port should initiate the link speed
change post SBR, not the Endpoint.
So, as per the hardware team recommendation, disable direct speed change
for the Endpoint mode to prevent it from initiating speed change after the
physical layer link is up at Gen1, leaving speed change ownership with the
host.
Fixes: c57247f940 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260324190755.1094879-8-mmaddireddy@nvidia.com
The GPIO DT property "nvidia,refclk-select", to select the PCIe reference
clock is optional. Use devm_gpiod_get_optional() to get it.
Fixes: c57247f940 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260324190755.1094879-7-mmaddireddy@nvidia.com
The PERST# GPIO interrupt is only registered when the controller is
operating in Endpoint mode. In Root Port mode, the PERST# GPIO is
configured as an output to control downstream devices, and no interrupt is
registered for it.
Currently, tegra_pcie_dw_stop_link() unconditionally calls disable_irq()
on pex_rst_irq, which causes issues in Root Port mode where this IRQ is
not registered.
Fix this by only disabling the PERST# IRQ when operating in Endpoint mode,
where the interrupt is actually registered and used to detect PERST#
assertion/deassertion from the host.
Fixes: c57247f940 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260324190755.1094879-6-mmaddireddy@nvidia.com
As per PCIe CEM r6.0, sec 2.3, the PCIe Endpoint device should be in D3cold
to assert WAKE# pin. The previous workaround that forced downstream devices
to D0 before taking the link to L2 cited PCIe r4.0, sec 5.2, "Link State
Power Management"; however, that spec does not explicitly require putting
the device into D0 and only indicates that power removal may be initiated
without transitioning to D3hot.
Remove the D0 workaround so that Endpoint devices can use wake
functionality (WAKE# from D3). With some Endpoints the link may not enter
L2 when they remain in D3, but the Root Port continues with the usual flow
after PME timeout, so there is no functional issue.
Fixes: 56e15a238d ("PCI: tegra: Add Tegra194 PCIe support")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260324190755.1094879-5-mmaddireddy@nvidia.com
After the link reaches a Detect-related LTSSM state, disable LTSSM so it
does not keep toggling between Polling and Detect. Do this by polling for
the Detect state first, then clearing APPL_CTRL_LTSSM_EN in both
tegra_pcie_dw_pme_turnoff() and pex_ep_event_pex_rst_assert().
Fixes: 56e15a238d ("PCI: tegra: Add Tegra194 PCIe support")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260324190755.1094879-4-mmaddireddy@nvidia.com
On surprise link down, LTSSM state transits from L0 -> Recovery.RcvrLock ->
Recovery.RcvrSpeed -> Gen1 Recovery.RcvrLock -> Detect. Recovery.RcvrLock
and Recovery.RcvrSpeed transit times are 24 ms and 48 ms respectively, so
the total time from L0 to Detect is ~96 ms. Increase the poll timeout to
120 ms to account for this.
While at it, add LTSSM state defines for Detect-related states and use them
in the poll condition. Use readl_poll_timeout() instead of
readl_poll_timeout_atomic() in tegra_pcie_dw_pme_turnoff() since that path
runs in non-atomic context.
Fixes: 56e15a238d ("PCI: tegra: Add Tegra194 PCIe support")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260324190755.1094879-3-mmaddireddy@nvidia.com
As per PCIe r7.0, sec 5.3.3.2.1, after sending PME_Turn_Off message, Root
Port should wait for 1-10 msec for PME_TO_Ack message. Currently, driver is
polling for 10 msec with 1 usec delay which is aggressive. Use existing
macro PCIE_PME_TO_L2_TIMEOUT_US to poll for 10 msec with 1 msec delay.
Since this function is used in non-atomic context only, use non-atomic poll
function.
Fixes: 56e15a238d ("PCI: tegra: Add Tegra194 PCIe support")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260324190755.1094879-2-mmaddireddy@nvidia.com
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmnUhoYTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXtIDCACrMU/FIxC/S3IcN5Nm60X194C2HpsW
qKZdpuFb9fxbJhHiZjwNbBsvaS8+kBQTRUiJalNgv3bYZ8y7Umt8tLNiDfgCGxRM
oAiab6AwQhskchO1mXX2L6FACY9uS2NsTgEfIHU3+EKW9blX4yJodDRpTecOdI0o
Ejxh2/xOC5hGHqYjol3EoDRMvn727audRKQeKDP8dh9Rn6RCbt08QinidSqpzGjI
Ts2i4kgaL7WQEfXyK6qrOoP4oJ6mHCu6bM/wwMkmCMLoDwwvZ32YZ3b+LMoTmSeH
FIr7mTd7loIpdVcmuSKXpjbRQgfiVLz0rEnYxy6o1XDjSpsMLdORvY44
=XSUS
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed-20260406' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V fixes from Wei Liu:
- Two fixes for Hyper-V PCI driver (Long Li, Sahil Chandna)
- Fix an infinite loop issue in MSHV driver (Stanislav Kinsburskii)
* tag 'hyperv-fixes-signed-20260406' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
mshv: Fix infinite fault loop on permission-denied GPA intercepts
PCI: hv: Fix double ida_free in hv_pci_probe error path
PCI: hv: Set default NUMA node to 0 for devices without affinity info
Rockchip platforms provide a 64x4 bytes debug FIFO to trace the LTSSM
transition and data rate change history. These will be useful for debugging
issues such as link failure, etc.
Hence, expose these information over pcie_ltssm_state_transition
tracepoint.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://patch.msgid.link/1774403912-210670-4-git-send-email-shawn.lin@rock-chips.com
Some PCI controllers may provide debug functionalities to track PCI bus
activities like LTSSM state transitions and data rate changes. These will
be very useful for debugging PCI link specific issues such as endpoint not
getting detected or performance issues.
Hence, implement the PCI controller tracepoint feature for recording LTSSM
state transitions and data rate changes.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
[mani: commit log and maintainers entry]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://patch.msgid.link/1774403912-210670-2-git-send-email-shawn.lin@rock-chips.com
NPEM registers LED classdevs on PCI endpoint that may be behind
hotplug-capable ports. During hot-removal, led_classdev_unregister() calls
led_set_brightness(LED_OFF) which leads to a PCI config read to a
disconnected device, which fails and returns -ENODEV (topology details in
msgid.link below):
leds 0003:01:00.0:enclosure:ok: Setting an LED's brightness failed (-19)
The LED core already suppresses this for devices with LED_HW_PLUGGABLE set,
but NPEM never sets it. Add the flag since NPEM LEDs are on hot-pluggable
hardware by nature.
Fixes: 4e893545ef ("PCI/NPEM: Add Native PCIe Enclosure Management support")
Signed-off-by: Richard Cheng <icheng@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Kai-Heng Feng <kaihengf@nvidia.com>
Link: https://patch.msgid.link/20260402093850.23075-1-icheng@nvidia.com
In the PCIe PHY init for the i.MX95, the reference clock source selection
uses a conditional instead of always passing the mask. This currently
breaks functionality if the internal refclk is used.
To fix this issue, always pass IMX95_PCIE_REF_USE_PAD as the mask and clear
bit if external refclk is not used. This essentially swaps the parameters.
Fixes: d8574ce57d ("PCI: imx6: Add external reference clock input mode support")
Signed-off-by: Franz Schnyder <franz.schnyder@toradex.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260325093118.684142-1-fra.schnyder@gmail.com
pcie_tph_get_cpu_st() uses the Query Cache Locality Features _DSM [1]
to retrieve the TPH Steering Tag for memory associated with the CPU
identified by its "cpu_uid" parameter, a Linux logical CPU ID.
The _DSM requires an ACPI Processor UID, which pcie_tph_get_cpu_st()
previously assumed was the same as the Linux logical CPU ID. This is
true on x86 but not on arm64, so pcie_tph_get_cpu_st() returned the
wrong Steering Tag, resulting in incorrect TPH functionality on arm64.
Convert the Linux logical CPU ID to the ACPI Processor UID with
acpi_get_cpu_uid() before passing it to the _DSM. Additionally, rename
the pcie_tph_get_cpu_st() parameter from "cpu_uid" to "cpu" to reflect
that it represents a logical CPU ID (not an ACPI Processor UID).
[1] According to ECN_TPH-ST_Revision_20200924
(https://members.pcisig.com/wg/PCI-SIG/document/15470), the input
is defined as: "If the target is a processor, then this field
represents the ACPI Processor UID of the processor as specified in
the MADT. If the target is a processor container, then this field
represents the ACPI Processor UID of the processor container as
specified in the PPTT."
Fixes: d2e8a34876 ("PCI/TPH: Add Steering Tag support")
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260401081640.26875-9-fengchengwen@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Switch to the device-managed variant so the notifier is automatically
unregistered on device removal, allowing the open-coded remove callback
to be dropped entirely.
Signed-off-by: Kai-Heng Feng <kaihengf@nvidia.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://patch.msgid.link/20260330094203.38022-3-kaihengf@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The commit 18ac51ae9d ("PCI: cadence: Implement capability search
using PCI core APIs") assumed all the platforms using Cadence PCIe
controller support byte and word register accesses. This is not true
for all platforms (e.g., TI J721E SoC, which only supports dword
register accesses).
This causes capability searches via cdns_pcie_find_capability() to fail
on such platforms.
Fix this by using cdns_pcie_read_sz() for config read functions, which
properly handles size-aligned accesses. Remove the now-unused byte and
word read wrapper functions (cdns_pcie_readw and cdns_pcie_readb).
Fixes: 18ac51ae9d ("PCI: cadence: Implement capability search using PCI core APIs")
Signed-off-by: Aksh Garg <a-garg7@ti.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260402085545.284457-1-a-garg7@ti.com
In mtk_pcie_setup_irq(), the IRQ domains are allocated before the
controller's IRQ is fetched. If the latter fails, the function
directly returns an error, without cleaning up the allocated domains.
Hence, reverse the order so that the IRQ domains are allocated after the
controller's IRQ is found.
This was flagged by Sashiko during a review of "[PATCH v6 0/7] PCI:
mediatek-gen3: add power control support".
Fixes: 814cceebba ("PCI: mediatek-gen3: Add INTx support")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://sashiko.dev/#/patchset/20260324052002.4072430-1-wenst%40chromium.org
Link: https://patch.msgid.link/20260324093542.18523-1-wenst@chromium.org
Tegra Endpoint exposes three 64-bit BARs at indices 0, 2, and 4:
- BAR0+BAR1: EPF test/data (programmable 64-bit BAR)
- BAR2+BAR3: MSI-X table (hardware-backed)
- BAR4+BAR5: DMA registers (hardware-backed)
Update tegra_pcie_epc_features so that BAR2 is BAR_RESERVED with
PCI_EPC_BAR_RSVD_MSIX_TBL_RAM (64 KB) & PCI_EPC_BAR_RSVD_MSIX_PBA_RAM
(64 KB) and BAR4 is BAR_RESERVED with PCI_EPC_BAR_RSVD_DMA_CTRL_MMIO (4KB).
This keeps CONSECUTIVE_BAR_TEST working while allowing the host to use
64-bit BAR2 (MSI-X) and BAR4 (DMA).
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260324080857.916263-4-mmaddireddy@nvidia.com
The Tegra194/234 Endpoint does not support the Resizable BAR capability,
but BAR0 can be programmed to different sizes via the DBI2 BAR registers
in dw_pcie_ep_set_bar_programmable(). The BAR0 size is set once during
initialization.
Remove the fixed 1MB limit from pci_epc_features so Endpoint function
drivers can configure the BAR0 size they need.
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260324080857.916263-3-mmaddireddy@nvidia.com
The aspeed_pcie_probe() function calls aspeed_pcie_init_irq_domain()
which allocates pcie->intx_domain and initializes MSI. However, if
platform_get_irq() fails afterwards, the cleanup action was not yet
registered via devm_add_action_or_reset(), causing the IRQ domain
resources to leak.
Fix this by registering the devm cleanup action immediately after
aspeed_pcie_init_irq_domain() succeeds, before calling
platform_get_irq(). This ensures proper cleanup on any subsequent
failure.
Fixes: 9aa0cb68fc ("PCI: aspeed: Add ASPEED PCIe RC driver")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Jacky Chou <jacky_chou@aspeedtech.com>
Link: https://patch.msgid.link/20260324-aspeed-v1-1-354181624c00@gmail.com
If hv_pci_probe() fails after storing the domain number in
hbus->bridge->domain_nr, there is a call to free this domain_nr via
pci_bus_release_emul_domain_nr(), however, during cleanup, the bridge
release callback pci_release_host_bridge_dev() also frees the domain_nr
causing ida_free to be called on same ID twice and triggering following
warning:
ida_free called for id=28971 which is not allocated.
WARNING: lib/idr.c:594 at ida_free+0xdf/0x160, CPU#0: kworker/0:2/198
Call Trace:
pci_bus_release_emul_domain_nr+0x17/0x20
pci_release_host_bridge_dev+0x4b/0x60
device_release+0x3b/0xa0
kobject_put+0x8e/0x220
devm_pci_alloc_host_bridge_release+0xe/0x20
devres_release_all+0x9a/0xd0
device_unbind_cleanup+0x12/0xa0
really_probe+0x1c5/0x3f0
vmbus_add_channel_work+0x135/0x1a0
Fix this by letting pci core handle the free domain_nr and remove
the explicit free called in pci-hyperv driver.
Fixes: bcce8c74f1 ("PCI: Enable host bridge emulation for PCI_DOMAINS_GENERIC platforms")
Signed-off-by: Sahil Chandna <sahilchandna@linux.microsoft.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1]
Link: https://lore.kernel.org/driver-core/DGRGTIRHA62X.3RY09D9SOK77P@kernel.org/ [1]
Reported-by: Gui-Dong Han <hanguidong02@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220789
Fixes: 782a985d7a ("PCI: Introduce new device binding path using pci_dev.driver_override")
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Williamson <alex@shazbot.org>
Tested-by: Gui-Dong Han <hanguidong02@gmail.com>
Reviewed-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://patch.msgid.link/20260324005919.2408620-6-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
On NXP i.MX7D, i.MX8MM, and i.MX8MQ chipsets, MSIs from the endpoints won't
be received by the iMSI-RX MSI controller if the Root Port MSI capability
is disabled.
Even though the Root Port MSIs won't be received by the iMSI-RX controller
due to design, these chipsets have some weird hardware bug that prevents
the endpoint MSIs from reaching when the Root Port MSI capability is
disabled.
Hence, introduce a new flag, 'dw_pcie_rp::keep_rp_msi_en', set it for the
above mentioned SoCs, and always keep the Root Port MSI capability when
this flag is set.
Note that by keeping Root Port MSI capability, Root Port MSIs such as AER,
PME and others won't be received by default. So users need to use
workarounds such as passing 'pcie_pme=nomsi' cmdline param.
Fixes: f5cd8a929c ("PCI: dwc: Remove MSI/MSIX capability for Root Port if iMSI-RX is used as MSI controller")
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: fix typos]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260331085252.1243108-1-hongxing.zhu@nxp.com
Point to the relevant sections in the most recent release 7.0 of the PCIe
spec. Text has mostly just moved around without any semantic change.
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260330-fix_pciatops-v7-3-f601818417e8@linux.ibm.com
When inspecting the config space of a Connect-X physical function in an
s390 system after it was initialized by the mlx5_core device driver, we
found the function to be enabled to request AtomicOps despite the Root Port
lacking support for completing them:
00:00.1 Ethernet controller: Mellanox Technologies MT2894 Family [ConnectX-6 Lx]
Subsystem: Mellanox Technologies Device 0002
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
AtomicOpsCtl: ReqEn+
On s390 and many virtualized guests, the Endpoint is visible but the Root
Port is not. In this case, pci_enable_atomic_ops_to_root() previously
enabled AtomicOps in the Endpoint even though it can't tell whether the
Root Port supports them as a completer.
Change pci_enable_atomic_ops_to_root() to fail if there's no Root Port or
the Root Port doesn't support AtomicOps.
Fixes: 430a23689d ("PCI: Add pci_enable_atomic_ops_to_root()")
Reported-by: Alexander Schmidt <alexs@linux.ibm.com>
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
[bhelgaas: commit log, check RP first to simplify flow]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260330-fix_pciatops-v7-2-f601818417e8@linux.ibm.com
Since Root Complex Integrated Endpoints (RCiEPs) attach to a bus that has
no bridge device describing the Root Port, the capability to complete
AtomicOps requests cannot be determined with PCIe methods.
Change default of pci_enable_atomic_ops_to_root() to not enable AtomicOps
requests on RCiEPs.
As far as we know, there are no RCiEPs that need AtomicOps (see Link
below).
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260330-fix_pciatops-v7-1-f601818417e8@linux.ibm.com
kstrtou32_from_user() returns int, but the return value was stored in
a u32 variable 'val', risking sign loss. Use a dedicated int variable
to correctly handle the return code.
Fixes: 4fbfa17f9a ("PCI: dwc: Add debugfs based Silicon Debug support for DWC")
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260401023048.4182452-1-18255117159@163.com
There is already an 'if PCI' condition wrapping several config options,
e.g., PCI_DOMAINS and VGA_ARB, making the 'depends on PCI' statement for
each of these a duplicate dependency (dead code).
Leave the outer 'if PCI...endif' and remove the individual 'depends on PCI'
statement from each option.
This dead code was found by kconfirm, a static analysis tool for Kconfig.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260330214549.16157-1-julianbraha@gmail.com
aer_print_error() skips printing if ratelimit_print[i] is not set. In the
native AER path, ratelimit_print is initialized by add_error_device()
during source device discovery, and is set to 1 for fatal errors to bypass
rate limiting since fatal errors should always be logged.
The DPC/EDR path uses the DPC-capable port as the error source and reads
its AER uncorrectable error status registers directly in
dpc_get_aer_uncorrect_severity(). Since it does not go through
add_error_device(), ratelimit_print[0] is left uninitialized and zero. As
a result, aer_print_error() silently drops all AER error messages for
DPC/EDR triggered events.
Set ratelimit_print[0] to 1 to bypass rate limiting and always print AER
logs for uncorrectable errors detected by the DPC port.
Fixes: a57f2bfb4a ("PCI/AER: Ratelimit correctable and non-fatal error logging")
Co-developed-by: Goudar Manjunath Ramanagouda <manjunath.ramanagouda.goudar@intel.com>
Signed-off-by: Goudar Manjunath Ramanagouda <manjunath.ramanagouda.goudar@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260318170449.2733581-1-sathyanarayanan.kuppuswamy@linux.intel.com
The numa_node sysfs interface allows users to manually override a PCI
device's NUMA node assignment. Currently, every write triggers a FW_BUG
warning and taints the kernel, even when writing the same value that is
already set.
Check if the requested node is already assigned to the device. If it
matches, return success immediately without tainting the kernel or printing
a warning.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260317002803.2353-1-lirongqing@baidu.com
When searching for the error source, the AER driver rules out devices whose
enable_cnt is zero. This was introduced in 2009 by commit 28eb27cf08
("PCI AER: support invalid error source IDs") without providing a
rationale.
Drivers typically call pci_enable_device() on probe, hence the enable_cnt
check essentially filters out unbound devices. At the time of the commit,
drivers had to opt in to AER by calling pci_enable_pcie_error_reporting()
and so any AER-enabled device could be assumed to be bound to a driver.
The check thus made sense because it allowed skipping config space accesses
to devices which were known not to be the error source.
But since 2022, AER is universally enabled on all devices when they are
enumerated, cf. commit f26e58bf6f ("PCI/AER: Enable error reporting when
AER is native").
Errors may very well be reported by unbound devices, e.g. due to link
instability. By ruling them out as error source, errors reported by them
are neither logged nor cleared. When they do get bound and another error
occurs, the earlier error is reported together with the new error, which
may confuse users. Stop doing so.
Fixes: f26e58bf6f ("PCI/AER: Enable error reporting when AER is native")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Stefan Roese <stefan.roese@mailbox.org>
Cc: stable@vger.kernel.org # v6.0+
Link: https://patch.msgid.link/734338c2e8b669db5a5a3b45d34131b55ffebfca.1774605029.git.lukas@wunner.de
PCI bridges are allowed to refuse activating VGA decoding, by simply
ignoring attempts to set the bit that enables it, so after setting the bit,
read it back to verify.
One example of such a bridge is the root bridge in IBM PowerNV, but this is
also useful for GPU passthrough into virtual machines, where it is
difficult to set up routing for legacy IO through IOMMU.
Signed-off-by: Simon Richter <Simon.Richter@hogyros.de>
[bhelgaas: subject, add comment about VGA Enable writability]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260307173538.763188-5-Simon.Richter@hogyros.de
PCMCIA is almost completely obsolete (the last computers supporting it
natively were from ~2009), and the general consensus [1] seems to be
that support for it should be gradually removed from the kernel.
In 2023, an initial step of removing all the PCMCIA char drivers was
taken in commit 9b12f050c7 ("char: pcmcia: remove all the drivers"),
and that has not been reverted, so it seems logical to continue this
process by removing more low-hanging fruit.
These host controller drivers have had no meaningful changes since
their status was discussed in 2022 [2], and are unlikely to have any
remaining users. Remove them and a couple references to them
in comments.
The i82365 and tcic drivers are for ISA-attached host controllers,
which are even less likely to be used nowadays than ones on other buses.
The i82092 driver has almost certainly not been used in over 20 years.
It was broken by a null pointer dereference since the dawn of Git
history (2.6.12-rc2 in 2005) until someone fixed it in 2021 in commit
e39cdacf2f ("pcmcia: i82092: fix a null pointer dereference bug").
From their dmesg log [3], it is clear they were testing in an emulated
environment and not on real hardware.
i82365.h is used by drivers other than i82365 and is therefore retained.
[1] https://lore.kernel.org/all/c5b39544-a4fb-4796-a046-0b9be9853787@app.fastmail.com/
[2] https://lore.kernel.org/all/Y07d7rMvd5++85BJ@owl.dominikbrodowski.net/
[3] https://lore.kernel.org/all/1624345891-4215-1-git-send-email-zheyuma97@gmail.com/
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> # for x86
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
When vNTB is used as a PCI endpoint function, the NTB device is backed
by a virtual PCI function. For DMA API allocations and mappings, NTB
clients must use the device that is associated with the IOMMU domain.
Implement ntb_dev_ops->get_dma_dev() for pci-epf-vntb and return the EPC
parent device.
Suggested-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260306031443.1911860-4-den@valinux.co.jp
The commit bc75c8e507 ("PCI: Rewrite bridge window head alignment
function") did not use if (r_size <= align) check from pbus_size_mem() for
the new head alignment bookkeeping structure (aligns2[]). In some
configurations, this can result in producing a gap into the bridge window
which the resource larger than its alignment cannot fill.
The old alignment calculation algorithm was removed by the subsequent
commit 3958bf16e2 ("PCI: Stop over-estimating bridge window size") which
renamed the aligns2[] array leaving only aligns[] array.
Add the if (r_size <= align) check back to avoid this problem.
Fixes: bc75c8e507 ("PCI: Rewrite bridge window head alignment function")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/all/b05a6f14-979d-42c9-924c-d8408cb12ae7@roeck-us.net/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xifer <xiferdev@gmail.com>
Link: https://patch.msgid.link/20260324165633.4583-11-ilpo.jarvinen@linux.intel.com
When a bridge window contains big and small resource(s), the small
resource(s) may not amount to the half of the size of the big resource
which would allow calculate_head_align() to shrink the head alignment.
This results in always placing the small resource(s) after the big
resource.
In general, it would be good to be able to place the small resource(s)
before the big resource to achieve better utilization of the address space.
In the cases where the large resource can only fit at the end of the
window, it is even required.
However, carrying the information over from pbus_size_mem() and
calculate_head_align() to __pci_assign_resource() and
pcibios_align_resource() is not easy with the current data structures.
A somewhat hacky way to move the non-aligning tail part to the head is
possible within pcibios_align_resource(). The free space between the start
of the free space span and the aligned start address can be compared with
the non-aligning remainder of the size. If the free space is larger than
the remainder, placing the remainder before the start address is possible.
This relocation should generally work, because PCI resources consist only
power-of-2 atoms.
Various arch requirements may still need to override the relocation, so the
relocation is only applied selectively in such cases.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221205
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xifer <xiferdev@gmail.com>
Link: https://patch.msgid.link/20260324165633.4583-10-ilpo.jarvinen@linux.intel.com
window_alignment() lacks prefix. Rename it to pci_min_window_alignment() in
order to include the prefix and also add min to indicate the returned
window alignment is the minimum PCI spec and arch allows.
Also make it available in drivers/pci/pci.h as upcoming changes will need
to call it from outside of setup-bus.c.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xifer <xiferdev@gmail.com>
Link: https://patch.msgid.link/20260324165633.4583-9-ilpo.jarvinen@linux.intel.com
__find_resource_space() calculates the full extent of empty space but only
passes the aligned space to resource_alignf callback. In some situations,
the callback may choose take advantage of the free space before the
requested alignment.
Pass the full extent of the calculated empty space to resource_alignf
callback as an additional parameter.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xifer <xiferdev@gmail.com>
Link: https://patch.msgid.link/20260324165633.4583-3-ilpo.jarvinen@linux.intel.com
reassign_resources_sorted() checks for two things:
a) Resource assignment failures for mandatory resources by checking if the
resource remains unassigned, which are known to always repeat, and does
not attempt to assign them again.
b) That resource is not among the ones being processed/assigned at this
stage, leading to skip processing such resources in
reassign_resources_sorted() as well (resource assignment progresses
one PCI hierarchy level at a time).
The problem here is that a) is checked before b), but b) also implies the
resource is not being assigned yet, making also a) true. As a) only skips
resource assignment but still removes the resource from realloc_head, the
later stages that would need to process the information in realloc_head
cannot obtain the optional size information anymore. This leads to
considering only non-optional part for bridge windows deeper in the PCI
hierarchy.
This problem has been observed during rescan (add_size is not considered
while attempting assignment for 0000:e2:00.0 indicating the corresponding
entry was removed from realloc_head while processing resource assignments
for 0000:e1):
pci_bus 0000:e1: scanning bus
...
pci 0000:e3:01.0: bridge window [mem 0x800000000-0x1000ffffff 64bit pref] to [bus e4] add_size 60c000000 add_align 800000000
pci 0000:e3:01.0: bridge window [mem 0x00100000-0x000fffff] to [bus e4] add_size 200000 add_align 200000
pci 0000:e3:02.0: disabling bridge window [mem 0x00000000-0x000fffff 64bit pref] to [bus e5] (unused)
pci 0000:e2:00.0: bridge window [mem 0x800000000-0x1000ffffff 64bit pref] to [bus e3-e5] add_size 60c000000 add_align 800000000
pci 0000:e2:00.0: bridge window [mem 0x00100000-0x001fffff] to [bus e3-e5] add_size 200000 add_align 200000
pcieport 0000:e1:02.0: bridge window [io size 0x2000]: can't assign; no space
pcieport 0000:e1:02.0: bridge window [io size 0x2000]: failed to assign
pcieport 0000:e1:02.0: bridge window [io 0x1000-0x2fff]: resource restored
pcieport 0000:e1:02.0: bridge window [io 0x1000-0x2fff]: resource restored
pcieport 0000:e1:02.0: bridge window [io size 0x2000]: can't assign; no space
pcieport 0000:e1:02.0: bridge window [io size 0x2000]: failed to assign
pci 0000:e2:00.0: bridge window [mem 0x28f000000000-0x28f800ffffff 64bit pref]: assigned
Fixes: 96336ec702 ("PCI: Perform reset_resource() and build fail list in sync")
Reported-by: Peter Nisbet <peter.nisbet@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Peter Nisbet <peter.nisbet@intel.com>
Link: https://patch.msgid.link/20260313084551.1934-1-ilpo.jarvinen@linux.intel.com
Steve reported an eGPU (either Radeon Instinct MI50 32GB or NVIDIA 3080
10GB) connected via Thunderbolt was not assigned sufficient BAR space in
v6.11, so the amdgpu and nvidia drivers were unable to initialize the
device.
pci_bridge_distribute_available_resources() -> ... ->
adjust_bridge_window() is called between __pci_bus_size_bridges()
and assigning the resources. Since the commit 948675736a ("PCI: Allow
adjust_bridge_window() to shrink resource if necessary")
adjust_bridge_window() can also shrink the bridge window. The shrunken
size, however, conflicts with what __pci_bus_size_bridges() ->
pbus_size_mem() calculated as the required bridge window size. By shrinking
the size, adjust_bridge_window() prevents the rest of the resource fitting
algorithm from working as intended. Resource fitting logic is expecting
assignment failures when bridge windows need resizing, but there are cases
where failures are no longer happening after the commit 948675736a ("PCI:
Allow adjust_bridge_window() to shrink resource if necessary").
The commit 948675736a ("PCI: Allow adjust_bridge_window() to shrink
resource if necessary") justifies the change by the extra reservation
made due to hpmemsize parameter, however, the kernel code contradicts
that statement. (For simplicity, finer-grained hpmmiosize and hpmmiopref
parameters that can be used to the same effect as hpmemsize are ignored in
this description.)
pbus_size_mem() calls calculate_memsize() twice. First with add_size=0
to find out the minimal required resource size. The second call occurs
with add_size=hpmemsize (effectively) but the result does not directly
affect the resource size only resulting in an entry on the realloc_head
list (a.k.a. add_list). Yet, adjust_bridge_window() directly changes
the resource size which does not include what is reserved due to
hpmemsize. Also, if the required size for the bridge window exceeds
hpmemsize, the parameter does not have any effect even on the second
size calculation made by pbus_size_mem(); from calculate_memsize():
size = max(size, add_size) + children_add_size;
The commit ae4611f1d7 ("PCI: Set resource size directly in
adjust_bridge_window()") that precedes the commit 948675736a ("PCI:
Allow adjust_bridge_window() to shrink resource if necessary") is also
related to causing this problem. Its changelog explicitly states
adjust_bridge_window() wants to "guarantee" allocation success.
Guaranteed allocations, however, are incompatible with how the other
parts of the resource fitting algorithm work. The given justification
fails to explain why guaranteed allocations at this stage are required
nor why forcing window to a smaller value than what was calculated by
pbus_size_mem() is correct. While the change might have worked by chance
in some test scenario, too small bridge window does not "guarantee"
success from the point of view of the endpoint device resource
assignments. No issue is mentioned within the changelog so it's unclear
if the change was made to fix some observed issue nor and what that
issue was.
The unwanted shrinking of a bridge window occurs, e.g., when a device with
large BARs such as eGPU is attached using Thunderbolt and the Root Port
holds less than enough resource space for the eGPU. The GPU resources are
in order of GBs and the default hotplug allocation is a mere 2MB
(DEFAULT_HOTPLUG_MMIO_PREF_SIZE). The problem is illustrated by this log
(filtered to the relevant content only):
pci 0000:00:07.0: PCI bridge to [bus 03-2c]
pci 0000:00:07.0: bridge window [mem 0x6000000000-0x601bffffff 64bit pref]
pci 0000:03:00.0: PCI bridge to [bus 00]
pci 0000:03:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
pci 0000:03:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:03:00.0: PCI bridge to [bus 04-2c]
pcieport 0000:00:07.0: Assigned bridge window [mem 0x6000000000-0x601bffffff 64bit pref] to [bus 03-2c] cannot fit 0xc00000000 required for 0000:03:00.0 bridging to [bus 04-2c]
pci 0000:03:00.0: bridge window [mem 0x800000000-0x10003fffff 64bit pref] to [bus 04-2c] add_size 100000 add_align 100000
pcieport 0000:00:07.0: distributing available resources
pci 0000:03:00.0: bridge window [mem 0x800000000-0x10003fffff 64bit pref] shrunken by 0x00000007e4400000
pci 0000:03:00.0: bridge window [mem 0x6000000000-0x601bffffff 64bit pref]: assigned
The initial size of the Root Port's window is 448MB (0x601bffffff -
0x6000000000). __pci_bus_size_bridges() -> pbus_size_mem() calculates the
required size to be 32772 MB (0x10003fffff - 0x800000000) which would fit
the eGPU resources. adjust_bridge_window() then shrinks the bridge window
down to what is guaranteed to fit into the Root Port's bridge window. The
bridge window for 03:00.0 is also eliminated from the add_list (a.k.a.
realloc_head) list by adjust_bridge_window().
After adjustment, the resources are assigned and as the bridge window for
03:00.0 is assigned successfully, no failure is recorded. Without a
failure, no attempt to resize the window of the Root Port is required. The
end result is eGPU not having large enough resources to work.
The commit 948675736a ("PCI: Allow adjust_bridge_window() to shrink
resource if necessary") also claims nested bridge windows are sized the
same, which is false. pbus_size_mem() calculates the size for the parent
bridge window by summing all the downstream resources so the resource
fitting calculates larger bridge window for the parent to accommodate the
childen. That is, hpmemsize does not result the same size for the case
where there are nested bridge windows.
In order to fix the most immediate problem, don't shrink the resource size
in adjust_bridge_window() as hpmemsize had nothing to do with it. When
considering add_size, only reduce it up to what is added due to hpmemsize
(if required size is larger than hpmemsize, the parameter has no impact,
see calculate_memsize()). Unfortunately, if the tail of the bridge window
was aligned in calculate_memsize() from below hpmemsize to above it, the
size check will falsely match but the check at least errs to the side of
caution. There's not enough information available in adjust_bridge_window()
to know the calculated size precisely.
This is not exactly a revert of the commits e4611f1d7e9 ("PCI: Set resource
size directly in adjust_bridge_window()") and 948675736a ("PCI: Allow
adjust_bridge_window() to shrink resource if necessary") as shrinking still
remains in place but is implemented differently, and the end result behaves
very differently.
It is possible that those two commits fixed some other issue that is not
described with enough detail in the changelog and undoing parts of them
results in another regression due to behavioral change. Nonetheless, as
described above, the solution by those two commits was flawed and the
issue, if one exists, should be solved in a way that is compatible with the
rest of the resource fitting algorithm instead of working against it.
Besides shrinking, the case where adjust_bridge_window() expands the bridge
window is likely somewhat wrong as well because it removes the entry from
add_list (a.k.a. realloc_head), but it is less damaging as that only
impacts optional resources and may have no impact if expanding by hpmemsize
is larger than what add_size was. Fixing it is left as further work.
Fixes: 948675736a ("PCI: Allow adjust_bridge_window() to shrink resource if necessary")
Fixes: ae4611f1d7 ("PCI: Set resource size directly in adjust_bridge_window()")
Reported-by: Steve Oswald <stevepeter.oswald@gmail.com>
Closes: https://lore.kernel.org/linux-pci/CAN95MYEaO8QYYL=5cN19nv_qDGuuP5QOD17pD_ed6a7UqFVZ-g@mail.gmail.com/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260219153951.68869-1-ilpo.jarvinen@linux.intel.com
Previously, pci_read_bridge_io() and pci_read_bridge_mmio_pref()
unconditionally set resource type flags (IORESOURCE_IO or IORESOURCE_MEM |
IORESOURCE_PREFETCH) when reading bridge window registers. For windows that
are not implemented in hardware, this may cause the allocator to assign
space for a window that doesn't exist.
For example, the EcoNET EN7528 SoC Root Port doesn't support the
prefetchable window, but since a downstream device had a prefetchable BAR,
the allocator mistakenly assigned a prefetchable window:
pci 0001:00:01.0: [14c3:0811] type 01 class 0x060400 PCIe Root Port
pci 0001:00:01.0: PCI bridge to [bus 01-ff]
pci 0001:00:01.0: bridge window [mem 0x28000000-0x280fffff]: assigned
pci 0001:00:01.0: bridge window [mem 0x28100000-0x282fffff pref]: assigned
pci 0001:01:00.0: BAR 0 [mem 0x28100000-0x281fffff 64bit pref]: assigned
pci_read_bridge_windows() already detects unsupported windows by testing
register writability and sets dev->io_window/pref_window accordingly.
Check dev->io_window/pref_window so we don't set the resource flags for
unsupported windows, which prevents the allocator from assigning space to
them.
After this commit, the prefetchable BAR is correctly allocated from the
non-prefetchable window:
pci 0001:00:01.0: bridge window [mem 0x28000000-0x281fffff]: assigned
pci 0001:01:00.0: BAR 0 [mem 0x28000000-0x280fffff 64bit pref]: assigned
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Link: https://lore.kernel.org/all/20260113210259.GA715789@bhelgaas/
Signed-off-by: Ahmed Naseef <naseefkm@gmail.com>
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260312165332.569772-4-cjd@cjdns.fr
The of_pci_get_max_link_speed() function currently validates the
"max-link-speed" DT property to be in the range 1..4 (Gen1..Gen4).
This imposes a maintenance burden because each new PCIe generation
would require updating this validation.
Remove the range check so the function returns the raw property value
(or a negative error code if the property is missing or malformed).
Since the callers are now validating the returned speed against the
range they support, this check can now be safely removed.
Removing the validation from this common function also allows future PCIe
generations to be supported without modifying drivers/pci/of.c.
Signed-off-by: Hans Zhang <18255117159@163.com>
[mani: commit log and kernel doc fix]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260313165522.123518-6-18255117159@163.com
Add validation for the "max-link-speed" DT property in three more
drivers, using the pcie_get_link_speed() helper.
- brcmstb: If the value is missing or invalid, fall back to no
limitation (pcie->gen = 0). Fix the previous incorrect logic.
- mediatek-gen3: If the value is missing or invalid, use the maximum
speed supported by the controller.
- rzg3s-host: If the value is missing or invalid, fall back to Gen2.
This ensures that all users of of_pci_get_max_link_speed() are ready
for the removal of the central range check.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260313165522.123518-5-18255117159@163.com
Use the new pcie_get_link_speed() helper to validate the value read from
the "max-link-speed" DT property. If the value is missing or invalid,
fall back to Gen2 (speed = 2). This prepares for the removal of the
range check in of_pci_get_max_link_speed().
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260313165522.123518-4-18255117159@163.com
Replace direct indexing of pcie_link_speed[] with the new helper
pcie_get_link_speed() in all DesignWare core and glue drivers. This
ensures that out-of-range generation numbers do not cause out-of-bounds
accesses when the helper returns PCI_SPEED_UNKNOWN, and prepares for
the removal of the range check in of_pci_get_max_link_speed().
The actual validation of the "max-link-speed" DT property (e.g., fallback
to a safe default and warning) is added in subsequent patches for each
driver that reads the property.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260313165522.123518-3-18255117159@163.com
The pcie_link_speed[] array is indexed by PCIe generation numbers
(1 = 2.5 GT/s, 2 = 5 GT/s, ...). Several drivers use it directly,
which can lead to out-of-bounds accesses if an invalid generation
number is used.
Introduce a helper function pcie_get_link_speed() that returns the
pci_bus_speed value for a given generation number, or PCI_SPEED_UNKNOWN if
the generation is out of range. This will allow us to safely handle
invalid values after the range check is removed from
of_pci_get_max_link_speed().
Signed-off-by: Hans Zhang <18255117159@163.com>
[mani: Fixed kernel-doc]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260313165522.123518-2-18255117159@163.com
The is_rc field in struct cdns_pcie is of type bool. Replace the
integer assignment (1) with the boolean literal true to improve
code clarity and maintain consistency with the type definition.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260315155351.127078-1-18255117159@163.com
Qcom PCIe Root Ports advertise hotplug capability in hardware, but do not
support hotplug command completion. As a result, the hotplug commands
issued by the pciehp driver never gets completion notification, leading to
repeated timeout warnings and multi-second delays during boot and
suspend/resume.
Commit a54db86ddc ("PCI: qcom: Do not advertise hotplug capability for
IPs v2.7.0 and v1.9.0") mistakenly assumed that the Root Ports doesn't
support Hotplug due to timeouts and disabled the Hotplug functionality
altogether. But the Root Ports does support reporting Hotplug events like
DL_Up/Down events.
So to fix the command completion timeout issues, just set the No Command
Completed Support (NCCS) bit and enable Hotplug in Slot Capability field
back.
Fixes: a54db86ddc ("PCI: qcom: Do not advertise hotplug capability for IPs v2.7.0 and v1.9.0")
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
[mani: renamed function, commit log and added comment]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> # Hamoa CRD, tunneled link
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260314-hotplug-v1-1-96ac87d93867@oss.qualcomm.com
Extend the DesignWare PCIe controller's debugfs statistical counter
interface with event definitions from groups 5 through 7 as documented
in the DWC PCIe Databook (version 6.30a, section 3.8.2.3, Tables 3-59,
3-60, 3-61). These counters provide visibility into Layer1 non-error
events (link state transitions,ASPM, L1 substates), Layer2 DLLP
exchanges, and Layer3 TLP transactions.
The counters are exposed under the debugfs statistical counter directory,
allowing users to monitor link behavior and diagnose PCIe protocol issues
more effectively.
Co-developed-by: Cheng Xin <chengqin195275@126.com>
Signed-off-by: Cheng Xin <chengqin195275@126.com>
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/20260307020152.1224518-1-18255117159@163.com
The imx_pcie_assert_core_reset() and imx_pcie_deassert_core_reset()
functions are primarily intended to reset the RC controller itself, not
the remote PCIe endpoint devices. However, the PERST# GPIO control was
previously embedded within these functions, which conflates two distinct
reset operations.
Move the PERST# GPIO handling into a dedicated function
imx_pcie_assert_perst(). This makes the code more maintainable and
prepares for parsing the reset-gpios property according to the new
Root Port DT binding in subsequent patches.
No functional change is intended.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Link: https://patch.msgid.link/20260306030456.1032815-1-sherry.sun@nxp.com
The function imx_pcie_deassert_core_reset() always returns 0 and the
return value is not used meaningfully by its callers.
Change the return type from int to void to simplify the code and
remove unnecessary error handling paths. No functional change intended.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Link: https://patch.msgid.link/20260306021247.991976-1-sherry.sun@nxp.com
Include errno in the error prints and also use dev_err() where applicable.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260305071236.23792-2-mani@kernel.org
Merely printing the error log without the actual EPF name will not give
much clue to the users about the failure. Hence, print the EPF name also.
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260305071236.23792-1-mani@kernel.org
On i.MX6SX, the LTSSM registers become inaccessible after the
PME_Turn_Off message is sent to the link. So there is no way to verify
whether the link has entered L2/L3 Ready state or not.
Hence, set IMX_PCIE_FLAG_SKIP_L23_READY flag for i.MX6SX SoC to skip the
L2/L3 Ready state polling and let the DWC core wait for 10ms after sending
the PME_Turn_Off message as per the PCIe spec r6.0, sec 5.3.3.2.1.
Fixes: a528d1a725 ("PCI: imx6: Use DWC common suspend resume method")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260228080925.1558395-1-hongxing.zhu@nxp.com
With the new PCI pwrctrl API and PCI slot binding and power drivers, we now
have a way to describe and power up WiFi/BT adapters connected through a
PCIe or M.2 slot, or populated onto the mainboard itself. The latter case
has the adapter layout or design copied verbatim, replacing the slot with
direct connections.
Integrate the PCI pwrctrl API into the PCIe driver, so that power is
properly enabled before PCIe link training is done, allowing the card to
successfully be detected.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260324052002.4072430-8-wenst@chromium.org
If further setup fails after the device is powered on and link training
succeeds, we want to place the device back in a quiescence state to avoid
unintended activity and save power. This also helps with power state
tracking and balancing once pwrctrl API is integrated.
Power down the device in the error paths of mtk_pcie_startup_port() and
mtk_pcie_probe().
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260324052002.4072430-7-wenst@chromium.org
In preparation for adding full power on/off control with the pwrctrl API,
split out the existing code that only partially deals with device power
sequencing into separate helper functions. The existing code only handles
PERST#.
This is purely moving code around, and brings no functional changes.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
[mani: moved the 'err' variable to next commit]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260324052002.4072430-6-wenst@chromium.org
The resume callback currently does teardown in the conditional block
directly. This is going to get ugly when the pwrctrl calls are added.
Move the teardown to a proper error cleanup path.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260324052002.4072430-5-wenst@chromium.org
Setting up the translation windows and enabling MSI involve only the
controller, not the link or any downstream device. These can be done before
the device is enabled.
Move these steps before the existing PERST# control and waiting for the
link to come up. This provides a cleaner separation of controller vs device
setup. This also allows the later commits that split out PERST# control and
add device power control to have cleaner teardown.
This change only moves code. No functional change is expected.
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260324052002.4072430-4-wenst@chromium.org
mtk_pcie_setup_irq() sets up the IRQ domains for PCI INTx and MSI, and
chains them to the controller's interrupt. It doesn't touch the PCIe
controller itself.
Move mtk_pcie_setup_irq() out of mtk_pcie_setup(), do it earlier so there's
nothing to clean up if it fails, and add an error message if it does fail.
Reorder mtk_pcie_irq_teardown() in the remove callback to follow. Also
create an error path in the probe function.
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260324052002.4072430-3-wenst@chromium.org
mtk_pcie_parse_port() in the pcie-mediatek-gen driver has a bunch of
if (err) {
dev_err(dev, "error message\n");
return err; # or goto
}
patterns.
Simplify these with dev_err_probe(). The system also gains proper deferred
probe messages that can be seen in:
/sys/kernel/debug/devices_deferred
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260324052002.4072430-2-wenst@chromium.org
pci_set_vga_state() returns an error code, which so far has been ignored by
the only caller, __vga_tryget(), so forward it to the caller. As the return
type of __vga_tryget() is a pointer, wrap the error in ERR_PTR().
Signed-off-by: Simon Richter <Simon.Richter@hogyros.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260307173538.763188-3-Simon.Richter@hogyros.de
If VGA routing cannot be established, vga_get_uninterruptible() returns an
error and does not increment the lock count. Return the error to the
caller.
Return before incrementing uc->io_cnt/mem_cnt so vga_arb_release() won't
call vga_put() when userspace closes the handle.
Signed-off-by: Simon Richter <Simon.Richter@hogyros.de>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260307173538.763188-2-Simon.Richter@hogyros.de
When hv_pci_assign_numa_node() processes a device that does not have
HV_PCI_DEVICE_FLAG_NUMA_AFFINITY set or has an out-of-range
virtual_numa_node, the device NUMA node is left unset. On x86_64,
the uninitialized default happens to be 0, but on ARM64 it is
NUMA_NO_NODE (-1).
Tests show that when no NUMA information is available from the Hyper-V
host, devices perform best when assigned to node 0. With NUMA_NO_NODE
the kernel may spread work across NUMA nodes, which degrades
performance on Hyper-V, particularly for high-throughput devices like
MANA.
Always set the device NUMA node to 0 before the conditional NUMA
affinity check, so that devices get a performant default when the host
provides no NUMA information, and behavior is consistent on both
x86_64 and ARM64.
Fixes: 999dd956d8 ("PCI: hv: Add support for protocol 1.3 and support PCI_BUS_RELATIONS2")
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
When devm_kzalloc() for reg_off fails, the code returns -ENOMEM without
freeing pcie->cfg, which was allocated earlier by pci_ecam_create().
Add the missing pci_ecam_free() call to properly release the allocated ECAM
configuration window on this error path.
Fixes: a0d9f2c08f ("PCI: sky1: Add PCIe host support for CIX Sky1")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Hans Zhang <18255117159@163.com>
Link: https://patch.msgid.link/20260324-sky1-v1-1-6a00cb2776b6@gmail.com
The for_each_endpoint_of_node() macro requires calling of_node_put() on the
endpoint node when breaking out of the loop early.
Add of_node_put(endpoint) before the early return to release the reference.
Fixes: cf3287fb2c ("PCI/pwrctrl: Ensure that remote endpoint node parent has supply requirement")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260323-pwctrl-v1-1-f5c03a2df7fb@gmail.com
With the move to explicit pwrctrl power on/off APIs, the caller, i.e., the
PCI controller driver, should manage the power state. The pwrctrl drivers
should not try to clean up or power off when they are removed, as this
might end up disabling an already disabled regulator, causing a big
warning. This can be triggered if a PCI controller driver's .remove()
callback calls pci_pwrctrl_destroy_devices() after
pci_pwrctrl_power_off_devices().
Drop the devm cleanup parts that turn off regulators from the pwrctrl
drivers.
Fixes: b921aa3f8d ("PCI/pwrctrl: Switch to pwrctrl create, power on/off, destroy APIs")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260226092234.3859740-1-wenst@chromium.org
R-Car S4 Series (R8A779F[4-7]*) EP controller uses a 4K minimum iATU region
size (CX_ATU_MIN_REGION_SIZE = 4K) as per R19UH0161EJ0130 Rev.1.30. Also,
the controller itself can only be configured in the range 4 KB to 64 KB, so
the current 1 MB alignment requirement is incorrect.
Hence, change the alignment to the min size 4K as per the documentation.
This also fixes needless unusability of BAR4 on this platform when the
target address is fixed, such as for doorbell targets.
Fixes: e311b3834d ("PCI: rcar-gen4: Add endpoint mode support")
Signed-off-by: Koichiro Den <den@valinux.co.jp>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260305151050.1834007-1-den@valinux.co.jp
R-Car Gen4 (S4) endpoint controller implements the PCIe Resizable BAR
capability for BAR0 and BAR2. Advertise them as BAR_RESIZABLE so that EPF
requested BAR sizes are reflected to the host.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
[commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260210160315.2272930-1-den@valinux.co.jp
As reported by the W=1 warning below, content of the 'name' variable might
get truncated with the existing size of 10 bytes. Though it is not
practically possible to exceed the 10 bytes size, increase it to 20 to
silence the warning for a clean W=1 build:
$ make W=1 drivers/pci/controller/pcie-mediatek.o
CALL scripts/checksyscalls.sh
DESCEND objtool
INSTALL libsubcmd_headers
CC drivers/pci/controller/pcie-mediatek.o
drivers/pci/controller/pcie-mediatek.c: In function ‘mtk_pcie_parse_port’:
drivers/pci/controller/pcie-mediatek.c:963:43: error: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 6 [-Werror=format-truncation=]
963 | snprintf(name, sizeof(name), "port%d", slot);
| ^~
drivers/pci/controller/pcie-mediatek.c:963:38: note: directive argument in the range [0, 2147483647]
963 | snprintf(name, sizeof(name), "port%d", slot);
| ^~~~~~~~
drivers/pci/controller/pcie-mediatek.c:963:9: note: ‘snprintf’ output between 6 and 15 bytes into a destination of size 10
963 | snprintf(name, sizeof(name), "port%d", slot);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/b835e360b42c5e0994f9301a34dbdf140a8d3ef5.1772493898.git.ryder.lee@mediatek.com
-----BEGIN PGP SIGNATURE-----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=8FIU
-----END PGP SIGNATURE-----
Merge tag 'pci-v7.0-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Create pwrctrl devices only for DT nodes below a PCI controller that
describe PCI devices and are related to a power supply; this prevents
waiting indefinitely for pwrctrl drivers that will never probe
(Manivannan Sadhasivam)
- Restore endpoint BAR mapping on subrange setup failure to make
selftest reliable (Koichiro Den)
* tag 'pci-v7.0-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: endpoint: pci-epf-test: Roll back BAR mapping when subrange setup fails
PCI/pwrctrl: Create pwrctrl devices only for PCI device nodes
PCI/pwrctrl: Ensure that remote endpoint node parent has supply requirement
Add driver for the ESWIN PCIe Root Complex based on the DesignWare PCIe
core, IP revision 5.96a. The PCIe Gen.3 Root Complex supports data rate of
8 GT/s and x4 lanes, with INTx and MSI interrupt capability.
Signed-off-by: Yu Ning <ningyu@eswincomputing.com>
Signed-off-by: Yanghui Ou <ouyanghui@eswincomputing.com>
Signed-off-by: Senchuan Zhang <zhangsenchuan@eswincomputing.com>
[mani: renamed "EIC7700" to "ESWIN", added maintainers entry, removed async probe]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: add driver tag in subject]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260227111808.1996-1-zhangsenchuan@eswincomputing.com
Enable the generic pwrctrl driver to control power of PCIe
UPD720201/UPD720202 USB 3.0 xHCI Host Controller.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260220-topic-sm8650-ayaneo-pocket-s2-base-v5-4-1ad79caa1efa@linaro.org
dev_err_probe() returns the error code passed to it, so this:
dev_err_probe(dev, ret, "Failed to get slot regulators\n");
return ret;
is equivalent to this:
return dev_err_probe(dev, ret, "Failed to get slot regulators\n");
Simplify by using the latter.
Suggested-by: Bartosz Golaszewski <brgl@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260220-topic-sm8650-ayaneo-pocket-s2-base-v5-2-1ad79caa1efa@linaro.org
The driver is pretty generic and would fit for either PCI Slots or
endpoints connected to PCI ports, so rename the driver and module as
pci-pwrctrl-generic.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260220-topic-sm8650-ayaneo-pocket-s2-base-v5-3-1ad79caa1efa@linaro.org
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260317133322.266102-8-krzysztof.kozlowski@oss.qualcomm.com
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260317133322.266102-7-krzysztof.kozlowski@oss.qualcomm.com
Per CXL r3.1, sec 8.1.5.2, the Secondary Bus Reset (SBR) bit in the Bridge
Control register of a CXL port has no effect unless the "Unmask SBR" bit in
the Port Control Extensions Register is set.
After b1956e2d07 ("PCI/CXL: Fail bus reset if upstream CXL Port has SBR
masked"), Linux checks the "Unmask SBR" bit in pci_reset_bus_function().
But when probe==true, it previously returned 0, incorrectly indicating that
SBR is a viable reset method for the device.
As a result, "bus" is listed in the device's "reset_method" attribute even
though the hardware is incapable of performing it. If a user writes "bus"
to "reset_method" or triggers a reset that falls back to SBR, the operation
fails with "write error: Inappropriate ioctl for device".
If the link is operating in CXL mode (pcie_is_cxl()), return -ENOTTY
immediately unless "Unmask SBR" is set, regardless of the probe argument.
This ensures that "bus" is not advertised in "reset_methods" when the
hardware prevents it, improving clarity for users and aligning the sysfs
capability report with actual hardware behavior.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
[bhelgaas: commit log, use pcie_is_cxl()]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260225133801.30231-1-vidyas@nvidia.com
When the BAR subrange mapping test on DWC-based platforms fails due to
insufficient free inbound iATU regions, pci_epf_test_bar_subrange_setup()
returns an error (-ENOSPC) but does not restore the original BAR mapping.
This causes subsequent test runs to become confusing, since the failure may
leave room for the next subrange mapping test to pass.
Fix this by restoring the original BAR mapping when preparation of the
subrange mapping fails, so that no side effect remains regardless of the
test success or failure.
Fixes: 6c5e610142 ("PCI: endpoint: pci-epf-test: Add BAR subrange mapping test support")
Reported-by: Christian Bruel <christian.bruel@foss.st.com>
Closes: https://lore.kernel.org/linux-pci/b2b03ebe-9482-4a13-b22f-7b44da096eed@foss.st.com/
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Christian Bruel <christian.bruel@foss.st.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260316140225.1481658-1-den@valinux.co.jp
If OF graph is used in the PCI device node, the pwrctrl core creates a
pwrctrl device even if the remote endpoint doesn't have power supply
requirements. Since the device doesn't have any power supply requirements,
there was no pwrctrl driver to probe, leading to PCI controller driver
probe deferral as it waits for all pwrctrl drivers to probe before starting
bus scan.
This issue happens with Qcom ath12k devices with WSI interface attached to
the Qcom IPQ platforms.
Fix this issue by checking for the existence of at least one power supply
property in the remote endpoint parent node. To consolidate all the checks,
create a new helper pci_pwrctrl_is_required() and move all the checks
there.
Fixes: 9db826206f ("PCI/pwrctrl: Create pwrctrl device if graph port is found")
Reported-by: Raj Kumar Bhagat <raj.bhagat@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Raj Kumar Bhagat <raj.bhagat@oss.qualcomm.com>
Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260223-pwrctrl-fixes-7-0-v2-1-97566dfb1809@oss.qualcomm.com
The AER and EDR error handling paths hold a reference on the pci_dev during
recovery. Hold a reference during the DPC recovery path as well.
Signed-off-by: Sizhe Liu <liusizhe5@huawei.com>
[bhelgaas: split to separate patch]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
https://patch.msgid.link/20260214081130.1878424-1-liusizhe5@huawei.com
Advertise reserved BARs as reserved in the Capabilities register,
such that the host side driver will be able to skip reserved BARs.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Koichiro Den <den@valinux.co.jp>
Tested-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Reviewed-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260312130229.2282001-20-cassel@kernel.org
The current EPC core design relies on an EPC driver disabling all BARs by
default. An EPF driver will then enable the BARs that it wants to enabled.
This design is there because there is no epc->ops->disable_bar().
(There is a epc->ops->clear_bar(), but that is only to disable a BAR that
has been enabled using epc->ops->set_bar() first.)
By default, an EPF driver will not be able to get/enable BARs that are
marked as BAR_RESERVED or BAR_DISABLED (see pci_epc_get_next_free_bar()).
Since the current EPC code design requires an EPC driver to disable all
BARs by default, move this to DWC common code from each glue driver.
BAR_RESERVED BARs are not disabled by default because these BARs are
hardware backed, and should only be disabled explicitly by an EPF driver
if absolutely necessary for the EPF driver to function correctly.
(This is similar to how e.g. NVMe may have vendor specific BARs outside of
the mandatory BAR0 which contains the NVMe registers.)
Note that there is currently no EPC operation to disable a BAR that has not
first been programmed using pci_epc_set_bar(). If an EPF driver ever wants
to disable a BAR marked as BAR_RESERVED, a disable_bar() operation would
have to be added first.
No functional changes intended.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Tested-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260312130229.2282001-19-cassel@kernel.org
Most DWC based EPC glue drivers that have BARs marked as BAR_RESERVED in
epc_features also call dw_pcie_ep_reset_bar() for these reserved BARs in
ep->ops->init(). (The only exception is pci-keystone.c.)
An EPF driver will be able to get/enable BARs that have been disabled/reset
using dw_pcie_ep_reset_bar(), except if the BAR is marked as BAR_RESERVED
(see pci_epc_get_next_free_bar()).
Thus, all EPC drivers that have BARs marked as BAR_RESERVED in epc_features
and call dw_pcie_ep_reset_bar(), should really have these BARs marked as
BAR_DISABLED. If dw_pcie_ep_reset_bar() is not called by the glue driver,
the BARs are kept as BAR_RESERVED.
No EPC drivers outside drivers/pci/controllers/dwc mark their BARs as
BAR_RESERVED, so there is nothing to do in non-DWC based EPC drivers.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Tested-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260312130229.2282001-18-cassel@kernel.org
Add a pci_epc_bar_type BAR_DISABLED to more clearly differentiate from
BAR_RESERVED.
This BAR type will only be used to describe a BAR that the EPC driver
should disable, and will thus never be available to an EPF driver.
(Unlike BAR_RESERVED, which will never be disabled by default by an EPC
driver.)
Co-developed-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Koichiro Den <den@valinux.co.jp>
Tested-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Link: https://patch.msgid.link/20260312130229.2282001-17-cassel@kernel.org
On RK3588 PCIe3_4L in EP mode, the integrated DMA controller registers
are permanently mapped to BAR4 and must not be repurposed by EPF
drivers.
When the remote peer needs to access these registers, it must use the
fixed BAR4 window instead of creating another inbound mapping in a
different BAR. Mixing the fixed window with an additional mapping can
lead to incorrect behavior.
Advertise the DMA controller MMIO window as a reserved BAR subregion so
EPF drivers can reuse it safely.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260312130229.2282001-16-cassel@kernel.org
A BAR that can only be configured as a 64-bit BAR by an EPC driver is
marked as such using the "only_64bit" flag.
Currently, the documentation says that an EPC driver should explicitly
mark the BAR succeeding an "only_64bit" BAR as BAR_RESERVED.
However, a 64-bit BAR will always take up two BARs. It is thus redundant
to mark both BARs.
pci_epc_get_next_free_bar() already skips the BAR succeeding a "only_64bit"
BAR, regardless if the succeeding BAR is marked as BAR_RESERVED or not.
Thus, drop the BAR_RESERVED for a BAR succeeding a "only_64bit" BAR.
No functional changes.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260312130229.2282001-13-cassel@kernel.org
Add support for the PCIe controller found in RZ/G3E SoCs to the existing
RZ/G3S PCIe host controller driver. The RZ/G3E PCIe controller is similar
to the RZ/G3S, with the following key differences:
- Supports PCIe Gen3 (8.0 GT/s) link speeds alongside Gen2 (5.0 GT/s)
- Uses a different reset control mechanism via AXI registers instead
of the Linux reset framework
- Requires specific SYSC configuration for link state control and
Root Complex mode selection
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
[mani: added a readl_relaxed() before fsleep() to flush previous write]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # RZ/V2N EVK
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260306143423.19562-13-john.madieu.xa@bp.renesas.com
Extend the link speed configuration to support Gen3 (8.0 GT/s) in
addition to Gen2 (5.0 GT/s). This is required for RZ/G3E PCIe host
support, which is Gen3 capable.
Instead of relying on DT max-link-speed for configuration, read the
hardware capabilities from the PCI_EXP_LNKCAP register to determine the
maximum supported speed. The DT max-link-speed property is now only used
as an optional limit when explicitly specified, which aligns with PCIe
subsystem expectations.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # RZ/V2N EVK
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260306143423.19562-12-john.madieu.xa@bp.renesas.com
Program the class code register explicitly during PCIe configuration
initialization. RZ/G3E requires this register to be set, while RZ/G3S
has these values as hardware defaults.
This configuration is harmless for RZ/G3S where these match the hardware
defaults, and necessary for RZ/G3E to properly identify the device as a
PCI bridge.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # RZ/V2N EVK
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260306143423.19562-11-john.madieu.xa@bp.renesas.com
Add optional cfg_pre_init, cfg_post_init, and cfg_deinit callbacks
to handle SoC-specific configuration methods. While RZ/G3S uses the Linux
reset framework with dedicated reset lines, other SoC variants like RZ/G3E
control configuration resets through PCIe AXI registers.
As Linux reset bulk API gracefully handles optional NULL reset lines
(num_cfg_resets = 0 for RZ/G3E), the driver continues to use the standard
reset framework when reset lines are available, while custom callbacks
are only invoked when provided.
This provides a balanced pattern where:
- RZ/G3S: Uses callbacks that fall back to the reset framework
- RZ/G3E: Sets num_cfg_resets=0, provides
cfg_pre_init/cfg_post_init/cfg_deinit
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # RZ/V2N EVK
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260306143423.19562-10-john.madieu.xa@bp.renesas.com
Some SoC variants such as RZ/G3E handle configuration reset control through
PCIe AXI registers instead of dedicated reset lines. Make cfg_resets
optional by using devm_reset_control_bulk_get_optional_exclusive() to allow
SoCs to use alternative or complementary reset control mechanisms.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # RZ/V2N EVK
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260306143423.19562-9-john.madieu.xa@bp.renesas.com
In preparation for adding RZ/G3E support, move the RST_RSM_B register
offset and mask into a SoC-specific data structure. Compared with RZ/G3S,
the RZ/G3E SYSC controls different functionalities for the PCIe controller.
Make SYSC operations conditional on the presence of register offset
information, allowing the driver to handle SoCs that don't use the
RST_RSM_B signal.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # RZ/V2N EVK
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260306143423.19562-8-john.madieu.xa@bp.renesas.com
The existing inbound window configuration algorithm has two issues that
prevent proper operation on RZ/G3E:
1. Over-mapping: Using roundup_pow_of_two() on the remaining region size
can result in windows that extend beyond the intended memory region.
2. Alignment violation: Addresses are only aligned to 4K regardless of
the actual window size. According to the RZ/G3S HW manual (Rev.1.10,
section 34.6.6.7) and RZ/G3E HW manual (Rev.1.15, section 6.6.7.6),
bit carry must not occur when adding AXI Window Base and AXI Window
Mask registers. This effectively requires the base address to be
aligned to the window size.
RZ/G3E strictly enforces these constraints and requires precise window
boundaries with properly aligned addresses.
Rework the algorithm to properly handle arbitrary region sizes and
alignment constraints by splitting non-power-of-2 regions into multiple
windows. The new approach iteratively selects the largest power-of-2
size that:
- Fits within the remaining region (__fls of remaining size)
- Does not exceed the natural alignment of the CPU address (__ffs)
- Does not exceed the natural alignment of the PCI address (__ffs)
This ensures windows never over-map beyond the intended region and
satisfies the hardware requirement that base address + mask must not
cause bit carry, while maintaining the 4K * 2^N byte window size
constraint.
The reworked algorithm is required for RZ/G3E support and remains
fully compatible with RZ/G3S.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # RZ/V2N EVK
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260306143423.19562-4-john.madieu.xa@bp.renesas.com
Reorder the reset assertion sequence during suspend from
power_resets -> cfg_resets to cfg_resets -> power_resets.
This change ensures the suspend sequence follows the reverse order
of the probe/init sequence, where power_resets are deasserted first
followed by cfg_resets.
Additionally, this ordering is required for RZ/G3E support where
cfg resets are controlled through PCIe AXI registers (offset 0x310h).
According to the RZ/G3E hardware manual (Rev.1.15, section 6.6.6.1.1
"Changing the Initial Values of the Registers"), AXI register access
requires ARESETn to be de-asserted and the clock to be supplied.
Since ARESETn is part of power_resets, cfg_resets must be asserted
before power_resets, otherwise the AXI registers become inaccessible.
Fixes: 7ef502fb35 ("PCI: Add Renesas RZ/G3S host controller driver")
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # RZ/V2N EVK
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260306143423.19562-3-john.madieu.xa@bp.renesas.com
Fix incorrect reset_control_bulk_deassert() call in the probe error
path. When unwinding from a failed pci_host_probe(), the configuration
resets should be asserted to restore the hardware to its initial state,
not deasserted again.
Fixes: 7ef502fb35 ("PCI: Add Renesas RZ/G3S host controller driver")
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # RZ/V2N EVK
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260306143423.19562-2-john.madieu.xa@bp.renesas.com
When the ACS command line parameter cannot be parsed, the kernel skips
applying the requested ACS override. This indicates an invalid boot
parameter and should not be logged at informational level.
Use pr_warn_once() so the message is surfaced as a warning while still
avoiding repeated log spam during device enumeration.
Signed-off-by: Richard Cheng <icheng@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Tushar Dave <tdave@nvidia.com>
Link: https://patch.msgid.link/20260312115441.8168-1-icheng@nvidia.com
Arm64 kernels are frequently built dual ACPI/DT, and then boot in ACPI
mode. In this case, there won't be an of_root, except for rare DT described
PCIe boards.
As a result, users in the common case see this high priority worrying
message, despite the machine working as expected.
Reduce this message to pr_debug() to avoid unnecessary noise.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260309045930.21531-1-jeremy.linton@arm.com
pci_bus/slot_lock/unlock/trylock() largely duplicate the bus iteration loop
with variation only due to slot filter handling. The only differences in
the loops is where the struct bus is found (directly in the argument vs in
slot->bus) and whether slot filter is applied. Those differences are simple
to handle using function parameters.
Consolidate the bus iteration loop to one place by creating
__pci_bus_{lock,unlock,trylock}() and call them from the non-underscore
locking functions.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260304122139.1479-1-ilpo.jarvinen@linux.intel.com
Use the slot reset method when resetting the bridge if the bus contains
hot plug slots. This fixes spurious hot plug events that are triggered
by the secondary bus reset that bypasses the slot's detection disabling.
Resetting a bridge's subordinate bus can be done like this:
# echo 1 > /sys/bus/pci/devices/0000:50:01.0/reset_subordinate
Prior to this patch, an example kernel message may show something like:
pcieport 0000:50:01.0: pciehp: Slot(40): Link Down
With this change, the pciehp driver ignores the link event during the
reset, so may show this message instead:
pcieport 0000:50:01.0: pciehp: Slot(40): Link Down/Up ignored
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20260217160836.2709885-4-kbusch@meta.com
A PCIe hotplug slot applies to the entire secondary bus. Thus, pciehp only
allocates a single hotplug_slot for the bridge to that bus. The existing
PCI slot, though, would only match to functions on device 0, meaning any
devices beyond that, e.g., ARI functions, are not matched to any slot even
though they share it. A slot reset will break all the missing devices
because the handling skips them.
For example, ARI devices with more than 8 functions fail because their
state is not properly handled, nor is the attached driver notified of the
reset. In the best case, the device will appear unresponsive to the driver,
resulting in unexpected errors. A worse possibility may panic the kernel if
in-flight transactions trigger hardware reported errors like this real
observation:
vfio-pci 0000:01:00.0: resetting
vfio-pci 0000:01:00.0: reset done
{1}[Hardware Error]: Error 1, type: fatal
{1}[Hardware Error]: section_type: PCIe error
{1}[Hardware Error]: port_type: 0, PCIe end point
{1}[Hardware Error]: version: 0.2
{1}[Hardware Error]: command: 0x0140, status: 0x0010
{1}[Hardware Error]: device_id: 0000:01:01.0
{1}[Hardware Error]: slot: 0
{1}[Hardware Error]: secondary_bus: 0x00
{1}[Hardware Error]: vendor_id: 0x1d9b, device_id: 0x0207
{1}[Hardware Error]: class_code: 020000
{1}[Hardware Error]: bridge: secondary_status: 0x0000, control: 0x0000
{1}[Hardware Error]: aer_cor_status: 0x00008000, aer_cor_mask: 0x00002000
{1}[Hardware Error]: aer_uncor_status: 0x00010000, aer_uncor_mask: 0x00100000
{1}[Hardware Error]: aer_uncor_severity: 0x006f6030
{1}[Hardware Error]: TLP Header: 0a412800 00192080 60000004 00000004
GHES: Fatal hardware error but panic disabled
Kernel panic - not syncing: GHES: Fatal hardware error
Allow a slot to be created to claim all devices on a bus, not just a
matching device. This is done by introducing a sentinel value, named
PCI_SLOT_ALL_DEVICES, which then has the PCI slot match to any device on
the bus. This fixes slot resets for pciehp.
Since 0xff already has special meaning, the chosen value for this new
feature is 0xfe. This will not clash with any actual slot number since they
are limited to 5 bits.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20260217160836.2709885-3-kbusch@meta.com
Make the code a little easier to navigate with more descriptive function
names. The two renamed functions here "try" to do to a reset, so make that
clear in the name to distinguish them from other similarly named functions:
__pci_reset_bus() -> pci_try_reset_bus()
__pci_reset_slot() -> pci_try_reset_slot()
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20260217160836.2709885-2-kbusch@meta.com
PCIe r7.0, section 7.5.3.6 states that for multi-function devices, the
Max Link Width and Max Link Speed fields in the Link Capabilities
Register must report the same values for all functions.
Currently, dw_pcie_setup() programs these fields only for Function 0
via dw_pcie_link_set_max_speed() and dw_pcie_link_set_max_link_width().
For multi-function endpoint configurations, Function 1 and beyond retain
their default values, violating the PCIe specification.
Fix this by reading the Max Link Width and Max Link Speed fields from
Link Capabilities Register of Function 0 after dw_pcie_setup() completes,
then mirroring these values to all other functions.
Fixes: 24ede430fa ("PCI: designware-ep: Add multiple PFs support for DWC")
Fixes: 89db0793c9 ("PCI: dwc: Add missing PCI_EXP_LNKCAP_MLW handling")
Signed-off-by: Aksh Garg <a-garg7@ti.com>
[mani: renamed ref_lnkcap to func0_lnkcap]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260224083817.916782-3-a-garg7@ti.com
In dw_pcie_ep_set_msix(), while updating the MSI-X Table Size value for
individual functions, Message Control register is read from the passed
function number register space using dw_pcie_ep_readw_dbi(), but always
written back to the Function 0's register space using dw_pcie_writew_dbi().
This causes incorrect MSI-X configuration for the rest of the functions,
other than Function 0.
Fix this by using dw_pcie_ep_writew_dbi() to write to the correct
function's register space, matching the read operation.
Fixes: 70fa02ca14 ("PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpers")
Signed-off-by: Aksh Garg <a-garg7@ti.com>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260224083817.916782-2-a-garg7@ti.com
-----BEGIN PGP SIGNATURE-----
iJEEABYKADkWIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCaav3pBsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDIACgkQgFxhu0/YY75xWwD+NO/7WX01zcYSFMHTjHRx
okbOkBwFzcZK+p/L4iTtVv0BAIYPUpa+RBLR2RtYN7mQEw8KO5yVgiLP2nlQYwIf
wZcH
=DrUe
-----END PGP SIGNATURE-----
Merge tag 'for-linus-7.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- a cleanup of arch/x86/kernel/head_64.S removing the pre-built page
tables for Xen guests
- a small comment update
- another cleanup for Xen PVH guests mode
- fix an issue with Xen PV-devices backed by driver domains
* tag 'for-linus-7.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/xenbus: better handle backend crash
xenbus: add xenbus_device parameter to xenbus_read_driver_state()
x86/PVH: Use boot params to pass RSDP address in start_info page
x86/xen: update outdated comment
xen/acpi-processor: fix _CST detection using undersized evaluation buffer
x86/xen: Build identity mapping page tables dynamically for XENPV
pci_epf_make() overwrites the actual error returned by pci_epf_create()
with -EINVAL, which hides the real failure reason. Use PTR_ERR(epf) instead
and print the error code.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260227030701.40533-1-alok.a.tiwari@oracle.com
Add driver support for DesignWare based PCIe controller in Andes
QiLai SoC. The driver only supports the Root Complex mode.
Signed-off-by: Randolph Lin <randolph@andestech.com>
[mani: squashed the MAINTAINERS change]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260225085504.3757601-4-randolph@andestech.com
The function description in kernel-doc refers to pci_epf_add_epf(), but the
correct function name is pci_epf_add_vepf(). Update it to match the
implementation.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260224183927.1369124-1-alok.a.tiwari@oracle.com
In order to prepare checking the xenbus device status in
xenbus_read_driver_state(), add the pointer to struct xenbus_device
as a parameter.
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: "Martin K. Petersen" <martin.petersen@oracle.com> # SCSI
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci/xen-pcifront.c
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20260218095205.453657-2-jgross@suse.com>
Disable the delayed work before clearing BAR mappings and doorbells to
avoid running the handler after resources have been torn down.
Unable to handle kernel paging request at virtual address ffff800083f46004
[...]
Internal error: Oops: 0000000096000007 [#1] SMP
[...]
Call trace:
epf_ntb_cmd_handler+0x54/0x200 [pci_epf_vntb] (P)
process_one_work+0x154/0x3b0
worker_thread+0x2c8/0x400
kthread+0x148/0x210
ret_from_fork+0x10/0x20
Fixes: e35f56bb03 ("PCI: endpoint: Support NTB transfer between RC and EP")
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260226084142.2226875-4-den@valinux.co.jp
epf_ntb_epc_destroy() duplicates the teardown that the caller is
supposed to do later. This leads to an oops when .allow_link fails or
when .drop_link is performed. Remove the helper.
Also drop pci_epc_put(). EPC device refcounting is tied to configfs EPC
group lifetime, and pci_epc_put() in the .drop_link path is sufficient.
Fixes: 8b821cf761 ("PCI: endpoint: Add EP function driver to provide NTB functionality")
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260226084142.2226875-3-den@valinux.co.jp
epf_ntb_epc_destroy() duplicates the teardown that the caller is
supposed to perform later. This leads to an oops when .allow_link fails
or when .drop_link is performed. The following is an example oops of the
former case:
Unable to handle kernel paging request at virtual address dead000000000108
[...]
[dead000000000108] address between user and kernel address ranges
Internal error: Oops: 0000000096000044 [#1] SMP
[...]
Call trace:
pci_epc_remove_epf+0x78/0xe0 (P)
pci_primary_epc_epf_link+0x88/0xa8
configfs_symlink+0x1f4/0x5a0
vfs_symlink+0x134/0x1d8
do_symlinkat+0x88/0x138
__arm64_sys_symlinkat+0x74/0xe0
[...]
Remove the helper, and drop pci_epc_put(). EPC device refcounting is
tied to the configfs EPC group lifetime, and pci_epc_put() in the
.drop_link path is sufficient.
Fixes: e35f56bb03 ("PCI: endpoint: Support NTB transfer between RC and EP")
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260226084142.2226875-2-den@valinux.co.jp
The INTx devm_request_irq() failure path logs an incorrect IRQ number. The
printed 'irq' variable refers to a previous MDB interrupt mapping and does
not correspond to the INTx IRQ being requested.
Fix the error message to report pcie->intx_irq, which is the IRQ associated
with the failing request.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202512230112.AaiGqMWM-lkp@intel.com/
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Rakuram Eswaran <rakuram.e96@gmail.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sai Krishna Musham <sai.krishna.musham@amd.com>
Link: https://patch.msgid.link/20251223184003.32950-1-rakuram.e96@gmail.com
pci_epf_mhi_edma_read() and pci_epf_mhi_edma_write() start DMA
operations and wait for completion with a timeout.
On successful completion, they previously returned the remaining
timeout, which callers may treat as an error. In particular,
mhi_ep_ring_add_element(), which calls pci_epf_mhi_edma_write() via
mhi_cntrl->write_sync(), interprets any non-zero return value as
failure.
Return 0 on success instead of the remaining timeout to prevent
mhi_ep_ring_add_element() from treating successful completion as an
error.
Fixes: 7b99aaadda ("PCI: epf-mhi: Add eDMA support")
Signed-off-by: Daniel Hodges <git@danielhodges.dev>
[mani: changed commit log as per https://lore.kernel.org/linux-pci/20260227191510.GA3904799@bhelgaas]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260206200529.10784-1-git@danielhodges.dev
Currently we enable PTM automatically for Root and Switch Upstream Ports if
the advertised capabilities support the relevant role. However, there are a
few issues with this. First of all, if there is no Endpoint that actually
needs the PTM functionality, this is just wasting link bandwidth. There are
just a couple of drivers calling pci_ptm_enable() in the tree.
Secondly, we do the enablement in pci_ptm_init() that is called pretty
early for the Switch Upstream Port before Downstream Ports are even
enumerated. Since the Upstream Port configuration affects the whole Switch,
enabling it this early might cause PTM requests to be sent. We actually do
see effects of this:
pcieport 0000:00:07.1: pciehp: Slot(6-1): Card present
pcieport 0000:00:07.1: pciehp: Slot(6-1): Link Up
pci 0000:2c:00.0: [8086:5786] type 01 class 0x060400 PCIe Switch Upstream Port
...
pci 0000:2c:00.0: PTM enabled, 4ns granularity
At this point we have only enumerated the Switch Upstream Port and now
PTM got enabled which immediately triggers a flood of errors:
pcieport 0000:00:07.1: AER: Multiple Uncorrectable (Non-Fatal) error message received from 0000:00:07.1
pcieport 0000:00:07.1: PCIe Bus Error: severity=Uncorrectable (Non-Fatal), type=Transaction Layer, (Receiver ID)
pcieport 0000:00:07.1: device [8086:d44f] error status/mask=00200000/00000000
pcieport 0000:00:07.1: [21] ACSViol (First)
pcieport 0000:00:07.1: AER: TLP Header: 0x34000000 0x00000052 0x00000000 0x00000000
pcieport 0000:00:07.1: AER: device recovery successful
pcieport 0000:00:07.1: AER: Uncorrectable (Non-Fatal) error message received from 0000:00:07.1
In the above TLP Header the Requester ID is 0 which causes an error as we
have ACS Source Validation enabled.
Change the PTM enablement to happen at the time pci_enable_ptm() is called.
It will try to enable PTM first for upstream devices before enabling for
the Endpoint itself. For disable path we need to keep count of how many
times PTM has been enabled and disable it only on the last, so change the
dev->ptm_enabled to a counter (and rename it to dev->ptm_enable_cnt
analogous to dev->pci_enable_cnt).
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260224111044.3487873-6-mika.westerberg@linux.intel.com
PCIe spec r7.0, sec 5.3.3.2.1, recommends proceeding with L2/L3 sequence
even if one or devices do not respond with PME_TO_Ack message after 10ms
timeout.
So just print a warning if the timeout happens and proceed with the system
suspend.
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260217113142.9140-1-manivannan.sadhasivam@oss.qualcomm.com
In imx_pcie_probe(), of_parse_phandle() returns the device node pointer
with increased refcount. The pointer reference must be dropped by the
caller when it's no longer needed. However, imx_pcie_probe() doesn't drop
the reference, causing reference leak.
Fix this by using the __free(device_node) cleanup handler to drop the
reference when the function goes out of scope.
Fixes: 1df82ec466 ("PCI: imx: Add workaround for e10728, IMX7d PCIe PLL failure")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
Link: https://patch.msgid.link/20260124-pci_imx6-v2-1-acb8d5187683@gmail.com
The layerscape pcie host controller could also be compiled as module.
Add the necessary infrastructure to allow building as module instead of
only as builtin driver.
Since the driver doesn't expose an irqchip controller, it is also safe to
be removed during runtime.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
[mani: added a note about driver removability]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Roy Zang <Roy.Zang@nxp.com>
Link: https://patch.msgid.link/20260112-v6-19-topic-layerscape-pcie-v1-1-1cd863fce50e@pengutronix.de
Endpoint drivers use dw_pcie_ep_raise_msix_irq() to raise an MSI-X
interrupt to the host using a writel(), which generates a PCI posted write
transaction. There's no completion for posted writes, so the writel() may
return before the PCI write completes. dw_pcie_ep_raise_msix_irq() also
unmaps the outbound ATU entry used for the PCI write, so the write races
with the unmap.
If the PCI write loses the race with the ATU unmap, the write may corrupt
host memory or cause IOMMU errors, e.g., these when running fio with a
larger queue depth against nvmet-pci-epf:
arm-smmu-v3 fc900000.iommu: 0x0000010000000010
arm-smmu-v3 fc900000.iommu: 0x0000020000000000
arm-smmu-v3 fc900000.iommu: 0x000000090000f040
arm-smmu-v3 fc900000.iommu: 0x0000000000000000
arm-smmu-v3 fc900000.iommu: event: F_TRANSLATION client: 0000:01:00.0 sid: 0x100 ssid: 0x0 iova: 0x90000f040 ipa: 0x0
arm-smmu-v3 fc900000.iommu: unpriv data write s1 "Input address caused fault" stag: 0x0
Flush the write by performing a readl() of the same address to ensure that
the write has reached the destination before the ATU entry is unmapped.
The same problem was solved for dw_pcie_ep_raise_msi_irq() in commit
8719c64e76 ("PCI: dwc: ep: Cache MSI outbound iATU mapping"), but there
it was solved by dedicating an outbound iATU only for MSI. We can't do the
same for MSI-X because each vector can have a different msg_addr and the
msg_addr may be changed while the vector is masked.
Fixes: beb4641a78 ("PCI: dwc: Add MSI-X callbacks handler")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260211175540.105677-2-cassel@kernel.org
Endpoint drivers use dw_pcie_ep_raise_msi_irq() to raise MSI interrupts to
the host. After 8719c64e76 ("PCI: dwc: ep: Cache MSI outbound iATU
mapping"), dw_pcie_ep_raise_msi_irq() caches the Message Address from the
MSI Capability in ep->msi_msg_addr. But that Message Address is controlled
by the host, and it may change. For example, if:
- firmware on the host configures the Message Address and triggers an
MSI,
- a driver on the Endpoint raises the MSI via dw_pcie_ep_raise_msi_irq(),
which caches the Message Address,
- a kernel on the host reconfigures the Message Address and the host
kernel driver triggers another MSI,
dw_pcie_ep_raise_msi_irq() notices that the Message Address no longer
matches the cached ep->msi_msg_addr, warns about it, and returns error
instead of raising the MSI. The host kernel may hang because it never
receives the MSI.
This was seen with the nvmet_pci_epf_driver: the host UEFI performs NVMe
commands, e.g. Identify Controller to get the name of the controller,
nvmet-pci-epf posts the completion queue entry and raises an IRQ using
dw_pcie_ep_raise_msi_irq(). When the host boots Linux, we see a
WARN_ON_ONCE() from dw_pcie_ep_raise_msi_irq(), and the host kernel hangs
because the nvme driver never gets an IRQ.
Remove the warning when dw_pcie_ep_raise_msi_irq() notices that Message
Address has changed, remap using the new address, and update the
ep->msi_msg_addr cache.
Fixes: 8719c64e76 ("PCI: dwc: ep: Cache MSI outbound iATU mapping")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Koichiro Den <den@valinux.co.jp>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260210181225.3926165-2-cassel@kernel.org
No pci_enable_ptm() callers supply the "granularity" pointer where the
clock granularity would be returned.
Drop the unused pci_enable_ptm() parameter.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://patch.msgid.link/20260224111044.3487873-5-mika.westerberg@linux.intel.com
The mw1..mw4 configfs attributes are only valid when the MW index is
within the configured num_mws range. Return -ERANGE instead of -EINVAL
when a configfs MW size attribute is accessed with an out-of-range MW
index.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260219145633.4191325-1-den@valinux.co.jp
Follow common kernel idioms for indices derived from configfs attributes
and suppress Smatch warnings:
epf_ntb_mw1_show() warn: potential spectre issue 'ntb->mws_size' [r]
epf_ntb_mw1_store() warn: potential spectre issue 'ntb->mws_size' [w]
Also fix the error message for out-of-range MW indices and %lld format
for unsigned values.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260105075606.1253697-1-den@valinux.co.jp
'struct configfs_item_operations' and 'configfs_group_operations' are not
modified in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
27503 12184 256 39943 9c07 drivers/pci/endpoint/pci-ep-cfs.o
After:
=====
text data bss dec hex filename
27855 11832 256 39943 9c07 drivers/pci/endpoint/pci-ep-cfs.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/f1f05f1c10c6caf37dd620fa12f508c53536996b.1765705512.git.christophe.jaillet@wanadoo.fr
The doorbell test requires the EPC driver to support dynamic inbound
mapping so the host can map the doorbell target address into a BAR
aperture.
Expose epc_features->dynamic_inbound_mapping via a new
CAP_DYNAMIC_INBOUND_MAPPING bit in the pci-epf-test capability register,
so the host-side pci_endpoint_test driver can detect missing support and
return -EOPNOTSUPP instead of running the test fruitlessly.
Suggested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260215150334.3391943-2-den@valinux.co.jp
pci_epf_alloc_doorbell() stores the allocated doorbell message array in
epf->db_msg/epf->num_db before requesting MSI vectors. If MSI allocation
fails, the array is freed but the EPF state may still point to freed
memory.
Clear epf->db_msg and epf->num_db on the MSI allocation failure path so
that later cleanup cannot double-free the array and callers can retry
allocation.
Also return -EBUSY when doorbells have already been allocated to prevent
leaking or overwriting an existing allocation.
Fixes: 1c3b002c6b ("PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller")
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260217063856.3759713-4-den@valinux.co.jp
pci_epf_test_doorbell_cleanup() unconditionally calls free_irq() for the
doorbell virq, which can trigger "Trying to free already-free IRQ"
warnings when the IRQ was never requested or when request_threaded_irq()
failed.
Move free_irq() out of pci_epf_test_doorbell_cleanup() and invoke it
only after a successful request, so that free_irq() is not called for
an unrequested IRQ.
Fixes: eff0c286aa ("PCI: endpoint: pci-epf-test: Add doorbell test support")
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260217063856.3759713-3-den@valinux.co.jp
epf_ntb_db_bar_init_msi_doorbell() requests ntb->db_count doorbell IRQs
and then performs additional MSI doorbell setup that may still fail.
The error path unwinds the requested IRQs, but it uses a loop variable
that is reused later in the function. When a later step fails, the
unwind can run with an unexpected index value and leave some IRQs
requested.
Track the number of successfully requested IRQs separately and use that
counter for the unwind so all previously requested IRQs are freed on
failure.
Fixes: dc693d6066 ("PCI: endpoint: pci-epf-vntb: Add MSI doorbell support")
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260217063856.3759713-2-den@valinux.co.jp
Add a TODO comment in pci/msi/msi.c to document that the automatic IRQ
vector management activated by pcim_enable_device() is a dangerous and
confusing.
Suggested-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1770798299-202288-4-git-send-email-shawn.lin@rock-chips.com
Update pci_free_irq_vectors() documentation to clarify that drivers using
pcim_enable_device() must not call pci_free_irq_vectors().
For legacy reasons, pcim_enable_device() switches several normally
un-managed functions into managed mode. Currently, the only function
affected in this way is pcim_setup_msi_release(), which results in
automatic IRQ vector management.
This behavior is dangerous and confusing. Drivers using pcim_enable_device()
should rely on the automatic IRQ vector management and avoid calling
pci_free_irq_vectors() manually.
Suggested-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
[bhelgaas: squash both updates to pci_free_irq_vectors() documentation]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1770798299-202288-2-git-send-email-shawn.lin@rock-chips.com
Link: https://patch.msgid.link/1770798299-202288-3-git-send-email-shawn.lin@rock-chips.com
Previously, pcie_enable_tph() only enabled TLP Processing Hints (TPH) if
both the Endpoint and its Root Port advertised TPH support.
Root Complex Integrated Endpoints (RCiEPs) are directly integrated into a
Root Complex and do not have an associated Root Port, so pcie_enable_tph()
never enabled TPH for RCiEPs.
PCIe r7.0 doesn't seem to include a way to learn whether a Root Complex
supports TPH, but sec 2.2.7.1.1 says Functions that lack TPH support should
ignore TPH, and maybe the same is true for Root Complexes:
A Function that does not support the TPH Completer or Routing capability
and receives a transaction with the TH bit [which indicates the presence
of TPH in the TLP header] Set is required to ignore the TH bit and handle
the Request in the same way as Requests of the same transaction type
without the TH bit Set.
Allow drivers to enable TPH for any RCiEP with a TPH Requester Capability.
Fixes: f69767a1ad ("PCI: Add TLP Processing Hints (TPH) support")
Signed-off-by: George Abraham P <george.abraham.p@intel.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260109052923.1170070-1-george.abraham.p@intel.com
When aspm_calc_l12_info() programs the L1 PM Substates Control 1 register
fields Common_Mode_Restore_Time, LTR_L1.2_THRESHOLD_Value and _Scale, it
invokes pci_clear_and_set_config_dword() in an incorrect way:
For the bits to clear it selects those corresponding to the field. So far
so good. But for the bits to set it passes a full register value.
pci_clear_and_set_config_dword() performs a boolean OR operation which
sets all bits of that value, not just the ones that were just cleared.
Thus, when setting the LTR_L1.2_THRESHOLD_Value and _Scale on the child of
an ASPM link, aspm_calc_l12_info() also sets the Common_Mode_Restore_Time.
That's a spec violation: PCIe r7.0 sec 7.8.3.3 says this field is RsvdP
for Upstream Ports. On Adrià's Pixelbook Eve, Common_Mode_Restore_Time
of the Intel 7265 "Stone Peak" wifi card is zero, yet aspm_calc_l12_info()
does not preserve the zero bits but instead programs the value calculated
for the Root Port into the wifi card.
Likewise, when setting the Common_Mode_Restore_Time on the Root Port,
aspm_calc_l12_info() also changes the LTR_L1.2_THRESHOLD_Value and _Scale
from the initial 163840 nsec to 237568 nsec (due to ORing those fields),
only to reduce it afterwards to 106496 nsec.
Amend all invocations of pci_clear_and_set_config_dword() to only set bits
which are cleared.
Finally, when setting the T_POWER_ON_Value and _Scale on the Root Port and
the wifi card, aspm_calc_l12_info() fails to preserve bits declared RsvdP
and instead overwrites them with zeroes. Replace pci_write_config_dword()
with pci_clear_and_set_config_dword() to avoid this.
Fixes: aeda9adeba ("PCI/ASPM: Configure L1 substate settings")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220705#c22
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Adrià Vilanova Martínez <me@avm99963.com>
Cc: stable@vger.kernel.org # v4.11+
Link: https://patch.msgid.link/5c1752d7512eed0f4ea57b84b12d7ee08ca61fc5.1771226659.git.lukas@wunner.de
Currently, pcie_clear_device_status() clears the entire PCIe Device Status
register (PCI_EXP_DEVSTA) by writing back the value read from the register,
which affects not only the error status bits but also other writable bits.
According to PCIe r7.0, sec 7.5.3.5, this register contains:
- RW1C error status bits (CED, NFED, FED, URD at bits 0-3): These are the
four error status bits that need to be cleared.
- Read-only bits (AUXPD at bit 4, TRPND at bit 5): Writing to these has
no effect.
- Emergency Power Reduction Detected (bit 6): A RW1C non-error bit
introduced in PCIe r5.0 (2019). This is currently the only writable
non-error bit in the Device Status register. Unconditionally clearing
this bit can interfere with other software components that rely on this
power management indication.
- Reserved bits (RsvdZ): These bits are required to be written as zero.
Writing 1s to them (as the current implementation may do) violates the
specification.
To prevent unintended side effects, modify pcie_clear_device_status() to
only write 1s to the four error status bits (CED, NFED, FED, URD), leaving
the Emergency Power Reduction Detected bit and reserved bits unaffected.
Fixes: ec752f5d54 ("PCI/AER: Clear device status bits during ERR_FATAL and ERR_NONFATAL")
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260211124624.49656-1-xueshuai@linux.alibaba.com
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmmWuQwTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXnnHB/41Jji+y8FHe2SqpQhUOqHb6NDEr3GX
YpAybhz2IsBHVhbCQn789UiIcSr0UDR7wnVLAmXe+5eY/jRwNggIO3tFqLYn92pK
KSTNafgNbLxh3iKBxRsUy0b3JutjD2LytkpFj2KVbBsZfmRxCZmKIV/4V18rV+fA
uemvoqLwU7emEWkhZ24suHMHPVpv6xKs9O6gOrQ4+zXR0g//eMLDqb17uj8h+8sM
ZsPsMYeuOihXlvGeBRjbnWYjA1ODWGDvwR9VT+VU4+HWht/KSr15EGeXZdV2eZUt
e/8swbqOS94a2ZjOgStzVkcPqAF88t9zZ+gvYElTDzLlHjqbrZdpeDDt
=A7tT
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20260218' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V updates from Wei Liu:
- Debugfs support for MSHV statistics (Nuno Das Neves)
- Support for the integrated scheduler (Stanislav Kinsburskii)
- Various fixes for MSHV memory management and hypervisor status
handling (Stanislav Kinsburskii)
- Expose more capabilities and flags for MSHV partition management
(Anatol Belski, Muminul Islam, Magnus Kulke)
- Miscellaneous fixes to improve code quality and stability (Carlos
López, Ethan Nelson-Moore, Li RongQing, Michael Kelley, Mukesh
Rathor, Purna Pavan Chandra Aekkaladevi, Stanislav Kinsburskii, Uros
Bizjak)
- PREEMPT_RT fixes for vmbus interrupts (Jan Kiszka)
* tag 'hyperv-next-signed-20260218' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (34 commits)
mshv: Handle insufficient root memory hypervisor statuses
mshv: Handle insufficient contiguous memory hypervisor status
mshv: Introduce hv_deposit_memory helper functions
mshv: Introduce hv_result_needs_memory() helper function
mshv: Add SMT_ENABLED_GUEST partition creation flag
mshv: Add nested virtualization creation flag
Drivers: hv: vmbus: Simplify allocation of vmbus_evt
mshv: expose the scrub partition hypercall
mshv: Add support for integrated scheduler
mshv: Use try_cmpxchg() instead of cmpxchg()
x86/hyperv: Fix error pointer dereference
x86/hyperv: Reserve 3 interrupt vectors used exclusively by MSHV
Drivers: hv: vmbus: Use kthread for vmbus interrupts on PREEMPT_RT
x86/hyperv: Remove ASM_CALL_CONSTRAINT with VMMCALL insn
x86/hyperv: Use savesegment() instead of inline asm() to save segment registers
mshv: fix SRCU protection in irqfd resampler ack handler
mshv: make field names descriptive in a header struct
x86/hyperv: Update comment in hyperv_cleanup()
mshv: clear eventfd counter on irqfd shutdown
x86/hyperv: Use memremap()/memunmap() instead of ioremap_cache()/iounmap()
...
dw_pcie_ep_set_bar() currently tears down existing inbound mappings only
when either the previous or the new struct pci_epf_bar uses submaps
(num_submap != 0). If both the old and new mappings are BAR Match Mode,
reprogramming the same ATU index is sufficient, so no explicit teardown
was needed.
However, some callers may reuse the same struct pci_epf_bar instance and
update it in place before calling set_bar() again. In that case
ep_func->epf_bar[bar] and the passed-in epf_bar can point to the same
object, so we cannot reliably distinguish BAR Match Mode -> BAR Match Mode
from Address Match Mode -> BAR Match Mode. As a result, the conditional
teardown based on num_submap becomes unreliable and existing inbound maps
may be left active.
Call dw_pcie_ep_clear_ib_maps() unconditionally before reprogramming the
BAR so that in-place updates are handled correctly.
This introduces a behavioral change in a corner case: if a BAR
reprogramming attempt fails (especially for the long-standing BAR Match
Mode -> BAR Match Mode update case), the previously programmed inbound
mapping will already have been torn down. This should be acceptable, since
the caller observes the error and should not use the BAR for any real
transactions in that case.
While at it, document that the existing update parameter check is
best-effort for in-place updates.
Fixes: cc839bef77 ("PCI: dwc: ep: Support BAR subrange inbound mapping via Address Match Mode iATU")
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260202145407.503348-3-den@valinux.co.jp
dw_pcie_ep_clear_ib_maps() first checks whether the inbound mapping for a
BAR is in BAR Match Mode (tracked via ep_func->bar_to_atu[bar]). Once
found, the iATU region is disabled and the bookkeeping is cleared.
BAR Match Mode and Address Match Mode mappings are mutually exclusive for a
given BAR, so there is nothing left for the Address Match Mode teardown
path to do after the BAR Match Mode mapping has been removed.
Return early after clearing the BAR Match Mode mapping to avoid running the
Address Match Mode teardown path. This makes the helper's intention
explicit and helps detect incorrect use of pci_epc_set_bar().
Suggested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260202145407.503348-2-den@valinux.co.jp
Like some of the other endpoint modules, pci-epf-test now also uses
configfs, but is missing an indication in Kconfig:
arm-linux-gnueabi-ld: drivers/pci/endpoint/functions/pci-epf-test.o: in function `pci_epf_test_add_cfs':
pci-epf-test.c:(.text.pci_epf_test_add_cfs+0x2c): undefined reference to `config_group_init_type_name'
Select the symbol as needed.
Fixes: ffcc4850a1 ("PCI: endpoint: pci-epf-test: Allow overriding default BAR sizes")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602180706.VtXkmtqL-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://patch.msgid.link/20260211070812.4087119-1-arnd@kernel.org
pbus_size_mem_optional() adds dev_res->add_size of a bridge window into
children_add_size when the window has a non-optional part. However, if the
bridge window is fully optional, only r_size is added (which is zero for
such a window).
Also, a second dev_res entry will be added by pci_dev_res_add_to_list()
into realloc_head for the bridge window (resulting in triggering the
realloc_head-must-be-fully-consumed sanity check after a single pass of the
resource assignment algorithm):
WARNING: drivers/pci/setup-bus.c:2153 at pci_assign_unassigned_root_bus_resources+0xa5/0x260
Correct these problems by always adding dev_res->add_size for bridge
windows and not calling pci_dev_res_add_to_list() if the dev_res entry
exists.
Fixes: 6a5e64c75e ("PCI: Add pbus_mem_size_optional() to handle optional sizes")
Reported-by: RavitejaX Veesam <ravitejax.veesam@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: RavitejaX Veesam <ravitejax.veesam@intel.com>
Link: https://patch.msgid.link/20260218223419.22366-1-ilpo.jarvinen@linux.intel.com
- A set of commits that introduces cxl_memdev_attach and pave way for
soft reserved handling, type2 accelerator enabling, and LSA 2.0
enabling. All these series require the endpoint driver to settle
before continuing the memdev driver probe.
dax/hmem, e820, resource: Defer Soft Reserved insertion until hmem is ready
cxl/mem: Introduce cxl_memdev_attach for CXL-dependent operation
cxl/mem: Drop @host argument to devm_cxl_add_memdev()
cxl/mem: Convert devm_cxl_add_memdev() to scope-based-cleanup
cxl/port: Arrange for always synchronous endpoint attach
cxl/mem: Arrange for always-synchronous memdev attach
cxl/mem: Fix devm_cxl_memdev_edac_release() confusion
- A set to address CXL port error protocol handling and reporting. The
large patch series was split into 3 parts. Part 1 and 2 are included
here with part 3 coming later. Part 1 consists of a series of code
refactoring to PCI AER sub-system that addresses CXL and also CXL
RAS code to prepare for port error handling. Part 2 refactors the
CXL code to move management of component registers to cxl_port
objects to allow all CXL AER errors to be handled through the
cxl_port hierarchy.
Part 2:
cxl/port: Move endpoint component register management to cxl_port
cxl/port: Map Port RAS registers
cxl/port: Move dport RAS setup to dport add time
cxl/port: Move dport probe operations to a driver event
cxl/port: Move decoder setup before dport creation
cxl/port: Cleanup dport removal with a devres group
cxl/port: Reduce number of @dport variables in cxl_port_add_dport()
cxl/port: Cleanup handling of the nr_dports 0 -> 1 transition
Part 1:
cxl: Update RAS handler interfaces to also support CXL Ports
cxl/mem: Clarify @host for devm_cxl_add_nvdimm()
PCI/AER: Update struct aer_err_info with kernel-doc formatting
PCI/AER: Report CXL or PCIe bus type in AER trace logging
PCI/AER: Use guard() in cxl_rch_handle_error_iter()
PCI/AER: Move CXL RCH error handling to aer_cxl_rch.c
PCI/AER: Update is_internal_error() to be non-static is_aer_internal_error()
PCI/AER: Export pci_aer_unmask_internal_errors()
cxl/pci: Move CXL driver's RCH error handling into core/ras_rch.c
PCI/AER: Replace PCIEAER_CXL symbol with CXL_RAS
cxl/pci: Remove CXL VH handling in CONFIG_PCIEAER_CXL conditional blocks from core/pci.c
PCI: Replace cxl_error_is_native() with pcie_aer_is_native()
cxl/pci: Remove unnecessary CXL RCH handling helper functions
cxl/pci: Remove unnecessary CXL Endpoint handling helper functions
PCI: Introduce pcie_is_cxl()
PCI: Update CXL DVSEC definitions
PCI: Move CXL DVSEC definitions into uapi/linux/pci_regs.h
- A set of patches to provide AMD Zen5 platform address translation for
CXL using ACPI PRMT. Set includes a conventions document to explain
why this is needed and how it's implemented.
cxl: Disable HPA/SPA translation handlers for Normalized Addressing
cxl/region: Factor out code into cxl_region_setup_poison()
cxl/atl: Lock decoders that need address translation
cxl: Enable AMD Zen5 address translation using ACPI PRMT
cxl/acpi: Prepare use of EFI runtime services
cxl: Introduce callback for HPA address ranges translation
cxl/region: Use region data to get the root decoder
cxl/region: Add @hpa_range argument to function cxl_calc_interleave_pos()
cxl/region: Separate region parameter setup and region construction
cxl: Simplify cxl_root_ops allocation and handling
cxl/region: Store HPA range in struct cxl_region
cxl/region: Store root decoder in struct cxl_region
cxl/region: Rename misleading variable name @hpa to @hpa_range
Documentation/driver-api/cxl: ACPI PRM Address Translation Support and AMD Zen5 enablement
cxl, doc: Moving conventions in separate files
cxl, doc: Remove isonum.txt inclusion
- A set of misc CXL patches of fixes, cleanups, and updates. Including
CXL address translation for unaligned MOD3 regions.
cxl: Fix premature commit_end increment on decoder commit failure
cxl/region: Use do_div() for 64-bit modulo operation
cxl/region: Translate HPA to DPA and memdev in unaligned regions
cxl/region: Translate DPA->HPA in unaligned MOD3 regions
cxl/core: Fix cxl_dport debugfs EINJ entries
cxl/acpi: Remove cxl_acpi_set_cache_size()
cxl/hdm: Fix newline character in dev_err() messages
cxl/pci: Remove outdated FIXME comment and BUILD_BUG_ON
Documentation/driver-api/cxl: device hotplug section
Documentation/driver-api/cxl: BIOS/EFI expectation update
-----BEGIN PGP SIGNATURE-----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=blFQ
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
- Introduce cxl_memdev_attach and pave way for soft reserved handling,
type2 accelerator enabling, and LSA 2.0 enabling. All these series
require the endpoint driver to settle before continuing the memdev
driver probe.
- Address CXL port error protocol handling and reporting.
The large patch series was split into three parts. The first two
parts are included here with the final part coming later.
The first part consists of a series of code refactoring to PCI AER
sub-system that addresses CXL and also CXL RAS code to prepare for
port error handling.
The second part refactors the CXL code to move management of
component registers to cxl_port objects to allow all CXL AER errors
to be handled through the cxl_port hierarchy.
- Provide AMD Zen5 platform address translation for CXL using ACPI
PRMT. This includes a conventions document to explain why this is
needed and how it's implemented.
- Misc CXL patches of fixes, cleanups, and updates. Including CXL
address translation for unaligned MOD3 regions.
[ TLA service: CXL is "Compute Express Link" ]
* tag 'cxl-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (59 commits)
cxl: Disable HPA/SPA translation handlers for Normalized Addressing
cxl/region: Factor out code into cxl_region_setup_poison()
cxl/atl: Lock decoders that need address translation
cxl: Enable AMD Zen5 address translation using ACPI PRMT
cxl/acpi: Prepare use of EFI runtime services
cxl: Introduce callback for HPA address ranges translation
cxl/region: Use region data to get the root decoder
cxl/region: Add @hpa_range argument to function cxl_calc_interleave_pos()
cxl/region: Separate region parameter setup and region construction
cxl: Simplify cxl_root_ops allocation and handling
cxl/region: Store HPA range in struct cxl_region
cxl/region: Store root decoder in struct cxl_region
cxl/region: Rename misleading variable name @hpa to @hpa_range
Documentation/driver-api/cxl: ACPI PRM Address Translation Support and AMD Zen5 enablement
cxl, doc: Moving conventions in separate files
cxl, doc: Remove isonum.txt inclusion
cxl/port: Unify endpoint and switch port lookup
cxl/port: Move endpoint component register management to cxl_port
cxl/port: Map Port RAS registers
cxl/port: Move dport RAS setup to dport add time
...
After ebe091ad81 ("PCI: Use pbus_select_window_for_type() during IO
window sizing") and ae88d0b9c5 ("PCI: Use pbus_select_window_for_type()
during mem window sizing"), many bridge windows can't get resources
assigned:
pci 0006:05:00.0: bridge window [??? 0x00001000-0x00001fff flags 0x20080000]: can't assign; no space
pci 0006:05:00.0: bridge window [??? 0x00001000-0x00001fff flags 0x20080000]: failed to assign
Those commits replace find_bus_resource_of_type() with
pbus_select_window_for_type(), and the latter lacks resource type
validation.
Add the resource type validation back to pbus_select_window_for_type() to
match the original behavior.
Fixes: 74afce3dfc ("PCI: Add bridge window selection functions")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221072
Signed-off-by: Kai-Heng Feng <kaihengf@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260210142058.82701-1-kaihengf@nvidia.com
-----BEGIN PGP SIGNATURE-----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=LIjp
-----END PGP SIGNATURE-----
Merge tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Don't try to enable Extended Tags on VFs since that bit is Reserved
and causes misleading log messages (Håkon Bugge)
- Initialize Endpoint Read Completion Boundary to match Root Port,
regardless of ACPI _HPX (Håkon Bugge)
- Apply _HPX PCIe Setting Record only to AER configuration, and only
when OS owns PCIe hotplug but not AER, to avoid clobbering Extended
Tag and Relaxed Ordering settings (Håkon Bugge)
Resource management:
- Move CardBus code to setup-cardbus.c and only build it when
CONFIG_CARDBUS is set (Ilpo Järvinen)
- Fix bridge window alignment with optional resources, where
additional alignment requirement was previously lost (Ilpo
Järvinen)
- Stop over-estimating bridge window size since they are now assigned
without any gaps between them (Ilpo Järvinen)
- Increase resource MAX_IORES_LEVEL to avoid /proc/iomem flattening
for nested bridges and endpoints (Ilpo Järvinen)
- Add pbus_mem_size_optional() to handle sizes of optional resources
(SR-IOV VF BARs, expansion ROMs, bridge windows) (Ilpo Järvinen)
- Don't claim disabled bridge windows to avoid spurious claim
failures (Ilpo Järvinen)
Driver binding:
- Fix device reference leak in pcie_port_remove_service() (Uwe
Kleine-König)
- Move pcie_port_bus_match() and pcie_port_bus_type to PCIe-specific
portdrv.c (Uwe Kleine-König)
- Convert portdrv to use pcie_port_bus_type.probe() and .remove()
callbacks so .probe() and .remove() can eventually be removed from
struct device_driver (Uwe Kleine-König)
Error handling:
- Clear stale errors on reporting agents upon probe so they don't
look like recent errors (Lukas Wunner)
- Add generic RAS tracepoint for hotplug events (Shuai Xue)
- Add RAS tracepoint for link speed changes (Shuai Xue)
Power management:
- Avoid redundant delay on transition from D3hot to D3cold if the
device was already in D3hot (Brian Norris)
- Prevent runtime suspend until devices are fully initialized to
avoid saving incompletely configured device state (Brian Norris)
Power control:
- Add power_on/off callbacks with generic signature to pwrseq,
tc9563, and slot drivers so they can be used by pwrctrl core
(Manivannan Sadhasivam)
- Add PCIe M.2 connector support to the slot pwrctrl driver
(Manivannan Sadhasivam)
- Switch to pwrctrl interfaces to create, destroy, and power on/off
devices, calling them from host controller drivers instead of the
PCI core (Manivannan Sadhasivam)
- Drop qcom .assert_perst() callbacks since this is now done by the
controller driver instead of the pwrctrl driver (Manivannan
Sadhasivam)
Virtualization:
- Remove an incorrect unlock in pci_slot_trylock() error handling
(Jinhui Guo)
- Lock the bridge device for slot reset (Keith Busch)
- Enable ACS after IOMMU configuration on OF platforms so ACS is
enabled an all devices; previously the first device enumerated
(typically a Root Port) didn't have ACS enabled (Manivannan
Sadhasivam)
- Disable ACS Source Validation for IDT 0x80b5 and 0x8090 switches to
work around hardware erratum; previously ACS SV was only
temporarily disabled, which worked for enumeration but not after
reset (Manivannan Sadhasivam)
Peer-to-peer DMA:
- Release per-CPU pgmap ref when vm_insert_page() fails to avoid hang
when removing the PCI device (Hou Tao)
- Remove incorrect p2pmem_alloc_mmap() warning about page refcount
(Hou Tao)
Endpoint framework:
- Add configfs sub-groups synchronously to avoid NULL pointer
dereference when racing with removal (Liu Song)
- Fix swapped parameters in pci_{primary/secondary}_epc_epf_unlink()
functions (Manikanta Maddireddy)
ASPEED PCIe controller driver:
- Add ASPEED Root Complex DT binding and driver (Jacky Chou)
Freescale i.MX6 PCIe controller driver:
- Add DT binding and driver support for an optional external refclock
in addition to the refclock from the internal PLL (Richard Zhu)
- Fix CLKREQ# control so host asserts it during enumeration and
Endpoints can use it afterwards to exit the L1.2 link state
(Richard Zhu)
NVIDIA Tegra PCIe controller driver:
- Export irq_domain_free_irqs() to allow PCI/MSI drivers that tear
down MSI domains to be built as modules (Aaron Kling)
- Allow pci-tegra to be built as a module (Aaron Kling)
NVIDIA Tegra194 PCIe controller driver:
- Relax Kconfig so tegra194 can be built for platforms beyond
Tegra194 (Vidya Sagar)
Qualcomm PCIe controller driver:
- Merge SC8180x DT binding into SM8150 (Krzysztof Kozlowski)
- Move SDX55, SDM845, QCS404, IPQ5018, IPQ6018, IPQ8074 Gen3,
IPQ8074, IPQ4019, IPQ9574, APQ8064, MSM8996, APQ8084 to dedicated
schema (Krzysztof Kozlowski)
- Add DT binding and driver support for SA8255p Endpoint being
configured by firmware (Mrinmay Sarkar)
- Parse PERST# from all PCIe bridge nodes for future platforms that
will have PERST# in Switch Downstream Ports as well as in Root
Ports (Manivannan Sadhasivam)
Renesas RZ/G3S PCIe controller driver:
- Use pci_generic_config_write() since the writability provided by
the custom wrapper is unnecessary (Claudiu Beznea)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2044 PCIe Root Ports (Inochi
Amaoto)
Synopsys DesignWare PCIe controller driver:
- Extend PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() to return a
pointer to the preceding Capability, to allow removal of
Capabilities that are advertised but not fully implemented (Qiang
Yu)
- Remove MSI and MSI-X Capabilities in platforms that can't support
them, so the PCI core automatically falls back to INTx (Qiang Yu)
- Add ASPM L1.1 and L1.2 Substates context to debugfs ltssm_status
for drivers that support this (Shawn Lin)
- Skip PME_Turn_Off broadcast and L2/L3 transition during suspend if
link is not up to avoid an unnecessary timeout (Manivannan
Sadhasivam)
- Revert dw-rockchip, qcom, and DWC core changes that used link-up
IRQs to trigger enumeration instead of waiting for link to be up
because the PCI core doesn't allocate bus number space for
hierarchies that might be attached (Niklas Cassel)
- Make endpoint iATU entry for MSI permanent instead of programming
it dynamically, which is slow and racy with respect to other
concurrent traffic, e.g., eDMA (Koichiro Den)
- Use iMSI-RX MSI target address when possible to fix endpoints using
32-bit MSI (Shawn Lin)
- Allow DWC host controller driver probe to continue if device is not
found or found but inactive; only fail when there's an error with
the link (Manivannan Sadhasivam)
- For controllers like NXP i.MX6QP and i.MX7D, where LTSSM registers
are not accessible after PME_Turn_Off, simply wait 10ms instead of
polling for L2/L3 Ready (Richard Zhu)
- Use multiple iATU entries to map large bridge windows and DMA
ranges when necessary instead of failing (Samuel Holland)
- Add EPC dynamic_inbound_mapping feature bit for Endpoint
Controllers that can update BAR inbound address translation without
requiring EPF driver to clear/reset the BAR first, and advertise it
for DWC-based Endpoints (Koichiro Den)
- Add EPC subrange_mapping feature bit for Endpoint Controllers that
can map multiple independent inbound regions in a single BAR,
implement subrange mapping, advertise it for DWC-based Endpoints,
and add Endpoint selftests for it (Koichiro Den)
- Make resizable BARs work for Endpoint multi-PF configurations;
previously it only worked for PF 0 (Aksh Garg)
- Fix Endpoint non-PF 0 support for BAR configuration, ATU mappings,
and Address Match Mode (Aksh Garg)
- Set up iATU when ECAM is enabled; previously IO and MEM outbound
windows weren't programmed, and ECAM-related iATU entries weren't
restored after suspend/resume, so config accesses failed (Krishna
Chaitanya Chundru)
Miscellaneous:
- Use system_percpu_wq and WQ_PERCPU to explicitly request per-CPU
work so WQ_UNBOUND can eventually be removed (Marco Crivellari)"
* tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (176 commits)
PCI/bwctrl: Disable BW controller on Intel P45 using a quirk
PCI: Disable ACS SV for IDT 0x8090 switch
PCI: Disable ACS SV for IDT 0x80b5 switch
PCI: Cache ACS Capabilities register
PCI: Enable ACS after configuring IOMMU for OF platforms
PCI: Add ACS quirk for Pericom PI7C9X2G404 switches [12d8:b404]
PCI: Add ACS quirk for Qualcomm Hamoa & Glymur
PCI: Use device_lock_assert() to verify device lock is held
PCI: Use lockdep_assert_held(pci_bus_sem) to verify lock is held
PCI: Fix pci_slot_lock () device locking
PCI: Fix pci_slot_trylock() error handling
PCI: Mark Nvidia GB10 to avoid bus reset
PCI: Mark ASM1164 SATA controller to avoid bus reset
PCI: host-generic: Avoid reporting incorrect 'missing reg property' error
PCI/PME: Replace RMW of Root Status register with direct write
PCI/AER: Clear stale errors on reporting agents upon probe
PCI: Don't claim disabled bridge windows
PCI: rzg3s-host: Fix device node reference leak in rzg3s_pcie_host_parse_port()
PCI: dwc: Fix missing iATU setup when ECAM is enabled
PCI: dwc: Clean up iATU index usage in dw_pcie_iatu_setup()
...
Including:
- Core changes:
- Rust bindings for IO-pgtable code
- IOMMU page allocation debugging support
- Disable ATS during PCI resets
- Intel VT-d changes:
- Skip dev-iotlb flush for inaccessible PCIe device
- Flush cache for PASID table before using it
- Use right invalidation method for SVA and NESTED domains
- Ensure atomicity in context and PASID entry updates
- AMD-Vi changes:
- Support for nested translations
- Other minor improvements
- ARM-SMMU-v2 changes:
- Configure SoC-specific prefetcher settings for Qualcomm's "MDSS".
- ARM-SMMU-v3 changes:
- Improve CMDQ locking fairness for pathetically small queue sizes.
- Remove tracking of the IAS as this is only relevant for AArch32 and
was causing C_BAD_STE errors.
- Add device-tree support for NVIDIA's CMDQV extension.
- Allow some hitless transitions for the 'MEV' and 'EATS' STE fields.
- Don't disable ATS for nested S1-bypass nested domains.
- Additions to the kunit selftests.
-----BEGIN PGP SIGNATURE-----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=W/nW
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core changes:
- Rust bindings for IO-pgtable code
- IOMMU page allocation debugging support
- Disable ATS during PCI resets
Intel VT-d changes:
- Skip dev-iotlb flush for inaccessible PCIe device
- Flush cache for PASID table before using it
- Use right invalidation method for SVA and NESTED domains
- Ensure atomicity in context and PASID entry updates
AMD-Vi changes:
- Support for nested translations
- Other minor improvements
ARM-SMMU-v2 changes:
- Configure SoC-specific prefetcher settings for Qualcomm's "MDSS"
ARM-SMMU-v3 changes:
- Improve CMDQ locking fairness for pathetically small queue sizes
- Remove tracking of the IAS as this is only relevant for AArch32 and
was causing C_BAD_STE errors
- Add device-tree support for NVIDIA's CMDQV extension
- Allow some hitless transitions for the 'MEV' and 'EATS' STE fields
- Don't disable ATS for nested S1-bypass nested domains
- Additions to the kunit selftests"
* tag 'iommu-updates-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (54 commits)
iommupt: Always add IOVA range to iotlb_gather in gather_range_pages()
iommu/amd: serialize sequence allocation under concurrent TLB invalidations
iommu/amd: Fix type of type parameter to amd_iommufd_hw_info()
iommu/arm-smmu-v3: Do not set disable_ats unless vSTE is Translate
iommu/arm-smmu-v3-test: Add nested s1bypass/s1dssbypass coverage
iommu/arm-smmu-v3: Mark EATS_TRANS safe when computing the update sequence
iommu/arm-smmu-v3: Mark STE MEV safe when computing the update sequence
iommu/arm-smmu-v3: Add update_safe bits to fix STE update sequence
iommu/arm-smmu-v3: Add device-tree support for CMDQV driver
iommu/tegra241-cmdqv: Decouple driver from ACPI
iommu/arm-smmu-qcom: Restore ACTLR settings for MDSS on sa8775p
iommu/vt-d: Fix race condition during PASID entry replacement
iommu/vt-d: Clear Present bit before tearing down context entry
iommu/vt-d: Clear Present bit before tearing down PASID entry
iommu/vt-d: Flush piotlb for SVM and Nested domain
iommu/vt-d: Flush cache for PASID table before using it
iommu/vt-d: Flush dev-IOTLB only when PCIe device is accessible in scalable mode
iommu/vt-d: Skip dev-iotlb flush for inaccessible PCIe device without scalable mode
rust: iommu: fix `srctree` link warning
rust: iommu: fix Rust formatting
...
- Add interrupt redirection infrastructure
Some PCI controllers use a single demultiplexing interrupt for the MSI
interrupts of subordinate devices.
This prevents setting the interrupt affinity of device interrupts, which
causes device interrupts to be delivered to a single CPU. That obviously is
counterproductive for multi-queue devices and interrupt balancing.
To work around this limitation the new infrastructure installs a dummy
irq_set_affinity() callback which captures the affinity mask and picks a
redirection target CPU out of the mask.
When the PCI controller demultiplexes the interrupts it invokes a new
handling function in the core, which either runs the interrupt handler in
the context of the target CPU or delegates it to irq_work on the target CPU.
- Utilize the interrupt redirection mechanism in the PCI DWC host controller
driver.
This allows affinity control for the subordinate device MSI interrupts
instead of being randomly executed on the CPU which runs the demultiplex
handler.
- Replace the binary 64-bit MSI flag with a DMA mask
Some PCI devices have PCI_MSI_FLAGS_64BIT in the MSI capability, but
implement less than 64 address bits. This breaks on platforms where such a
device is assigned an MSI address higher than what's supported.
With the binary 64-bit flag there is no other choice than disabling 64-bit
MSI support which leaves the device disfunctional.
By using a DMA mask the address limit of a device can be described
correctly which provides support for the above scenario.
- Make use of the DMA mask based address limit in the hda/intel and radeon
drivers to enable them on affected platforms.
- The usual small cleanups and improvements
-----BEGIN PGP SIGNATURE-----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=SCSQ
-----END PGP SIGNATURE-----
Merge tag 'irq-msi-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for the [PCI] MSI subsystem:
- Add interrupt redirection infrastructure
Some PCI controllers use a single demultiplexing interrupt for the
MSI interrupts of subordinate devices.
This prevents setting the interrupt affinity of device interrupts,
which causes device interrupts to be delivered to a single CPU.
That obviously is counterproductive for multi-queue devices and
interrupt balancing.
To work around this limitation the new infrastructure installs a
dummy irq_set_affinity() callback which captures the affinity mask
and picks a redirection target CPU out of the mask.
When the PCI controller demultiplexes the interrupts it invokes a
new handling function in the core, which either runs the interrupt
handler in the context of the target CPU or delegates it to
irq_work on the target CPU.
- Utilize the interrupt redirection mechanism in the PCI DWC host
controller driver.
This allows affinity control for the subordinate device MSI
interrupts instead of being randomly executed on the CPU which runs
the demultiplex handler.
- Replace the binary 64-bit MSI flag with a DMA mask
Some PCI devices have PCI_MSI_FLAGS_64BIT in the MSI capability,
but implement less than 64 address bits. This breaks on platforms
where such a device is assigned an MSI address higher than what's
supported.
With the binary 64-bit flag there is no other choice than disabling
64-bit MSI support which leaves the device disfunctional.
By using a DMA mask the address limit of a device can be described
correctly which provides support for the above scenario.
- Make use of the DMA mask based address limit in the hda/intel and
radeon drivers to enable them on affected platforms
- The usual small cleanups and improvements"
* tag 'irq-msi-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ALSA: hda/intel: Make MSI address limit based on the device DMA limit
drm/radeon: Make MSI address limit based on the device DMA limit
PCI/MSI: Check the device specific address mask in msi_verify_entries()
PCI/MSI: Convert the boolean no_64bit_msi flag to a DMA address mask
genirq/redirect: Prevent writing MSI message on affinity change
PCI/MSI: Unmap MSI-X region on error
genirq: Update effective affinity for redirected interrupts
PCI: dwc: Enable MSI affinity support
PCI: dwc: Code cleanup
genirq: Add interrupt redirection infrastructure
genirq/msi: Correct kernel-doc in <linux/msi.h>
- Quirk the broken EFI framebuffer geometry on the Valve Steam Deck
- Capture the EDID information of the primary display also on non-x86
EFI systems when booting via the EFI stub.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCaYoTAgAKCRAwbglWLn0t
XFe8AQDJe2GSNfzWgqoTqgT6tcH7lFG2SjdpIb+jHSmvgHckbAD/cUaY8YnhdYkm
nz6URLJN/2NHuaDq1mUL8CwJwIot4wk=
=41tn
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Quirk the broken EFI framebuffer geometry on the Valve Steam Deck
- Capture the EDID information of the primary display also on non-x86
EFI systems when booting via the EFI stub.
* tag 'efi-next-for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Support EDID information
sysfb: Move edid_info into sysfb_primary_display
sysfb: Pass sysfb_primary_display to devices
sysfb: Replace screen_info with sysfb_primary_display
sysfb: Add struct sysfb_display_info
efi: sysfb_efi: Reduce number of references to global screen_info
efi: earlycon: Reduce number of references to global screen_info
efi: sysfb_efi: Fix efidrmfb and simpledrmfb on Valve Steam Deck
efi: sysfb_efi: Convert swap width and height quirk to a callback
efi: sysfb_efi: Fix lfb_linelength calculation when applying quirks
efi: sysfb_efi: Replace open coded swap with the macro
affinity of unbound kthreads (node or custom cpumask) against
housekeeping (CPU isolation) constraints and CPU hotplug events.
One crucial missing piece is the handling of cpuset: when an isolated
partition is created, deleted, or its CPUs updated, all the unbound
kthreads in the top cpuset become indifferently affine to _all_ the
non-isolated CPUs, possibly breaking their preferred affinity along
the way.
Solve this with performing the kthreads affinity update from cpuset to
the kthreads consolidated relevant code instead so that preferred
affinities are honoured and applied against the updated cpuset isolated
partitions.
The dispatch of the new isolated cpumasks to timers, workqueues and
kthreads is performed by housekeeping, as per the nice Tejun's
suggestion.
As a welcome side effect, HK_TYPE_DOMAIN then integrates both the set
from boot defined domain isolation (through isolcpus=) and cpuset
isolated partitions. Housekeeping cpumasks are now modifiable with a
specific RCU based synchronization. A big step toward making nohz_full=
also mutable through cpuset in the future.
-----BEGIN PGP SIGNATURE-----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=nWGh
-----END PGP SIGNATURE-----
Merge tag 'kthread-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull kthread updates from Frederic Weisbecker:
"The kthread code provides an infrastructure which manages the
preferred affinity of unbound kthreads (node or custom cpumask)
against housekeeping (CPU isolation) constraints and CPU hotplug
events.
One crucial missing piece is the handling of cpuset: when an isolated
partition is created, deleted, or its CPUs updated, all the unbound
kthreads in the top cpuset become indifferently affine to _all_ the
non-isolated CPUs, possibly breaking their preferred affinity along
the way.
Solve this with performing the kthreads affinity update from cpuset to
the kthreads consolidated relevant code instead so that preferred
affinities are honoured and applied against the updated cpuset
isolated partitions.
The dispatch of the new isolated cpumasks to timers, workqueues and
kthreads is performed by housekeeping, as per the nice Tejun's
suggestion.
As a welcome side effect, HK_TYPE_DOMAIN then integrates both the set
from boot defined domain isolation (through isolcpus=) and cpuset
isolated partitions. Housekeeping cpumasks are now modifiable with a
specific RCU based synchronization. A big step toward making
nohz_full= also mutable through cpuset in the future"
* tag 'kthread-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks: (33 commits)
doc: Add housekeeping documentation
kthread: Document kthread_affine_preferred()
kthread: Comment on the purpose and placement of kthread_affine_node() call
kthread: Honour kthreads preferred affinity after cpuset changes
sched/arm64: Move fallback task cpumask to HK_TYPE_DOMAIN
sched: Switch the fallback task allowed cpumask to HK_TYPE_DOMAIN
kthread: Rely on HK_TYPE_DOMAIN for preferred affinity management
kthread: Include kthreadd to the managed affinity list
kthread: Include unbound kthreads in the managed affinity list
kthread: Refine naming of affinity related fields
PCI: Remove superfluous HK_TYPE_WQ check
sched/isolation: Remove HK_TYPE_TICK test from cpu_is_isolated()
cpuset: Remove cpuset_cpu_is_isolated()
timers/migration: Remove superfluous cpuset isolation test
cpuset: Propagate cpuset isolation update to timers through housekeeping
cpuset: Propagate cpuset isolation update to workqueue through housekeeping
PCI: Flush PCI probe workqueue on cpuset isolated partition change
sched/isolation: Flush vmstat workqueues on cpuset isolated partition change
sched/isolation: Flush memcg workqueues on cpuset isolated partition change
cpuset: Update HK_TYPE_DOMAIN cpumask from cpuset
...
- Update the ACPICA code in the kernel to upstream version 20251212
which includes the following changes:
* Add support for new ACPI table DTPR (Michal Camacho Romero)
* Release objects with acpi_ut_delete_object_desc() (Zilin Guan)
* Add UUIDs for Microsoft fan extensions and UUIDs associated with
TPM 2.0 devices (Armin Wolf)
* Fix NULL pointer dereference in acpi_ev_address_space_dispatch()
(Alexey Simakov)
* Add KEYP ACPI table definition (Dave Jiang)
* Add support for the Microsoft display mux _OSI string (Armin Wolf)
* Add definitions for the IOVT ACPI table (Xianglai Li)
* Abort AML bytecode execution on AML_FATAL_OP (Armin Wolf)
* Include all fields in subtable type1 for PPTT (Ben Horgan)
* Add GICv5 MADT structures and Arm IORT IWB node definitions (Jose
Marinho)
* Update Parameter Block structure for RAS2 and add a new flag in
Memory Affinity Structure for SRAT (Pawel Chmielewski)
* Add _VDM (Voltage Domain) object (Pawel Chmielewski)
- Add support for GICv5 ACPI probing on ARM which is based on the
GICv5 MADT structures and ARM IORT IWB node definitions recently
added to ACPICA (Lorenzo Pieralisi)
- Rework ACPI PM notification setup for PCI root buses and modify the
ACPI PM setup for devices to register wakeup source objects under
physical (that is, PCI, platform, etc.) devices instead of doing that
under their ACPI companions (Rafael Wysocki)
- Adjust debug messages regarding postponed ACPI PM printed during
system resume to be more accurate (Rafael Wysocki)
- Remove dead code from lps0_device_attach() (Gergo Koteles)
- Start to invoke Microsoft Function 9 (Turn On Display) of the Low-
Power S0 Idle (LPS0) _DSM in the suspend-to-idle resume flow on
systems with ACPI LPS0 support to address a functional issue on
Lenovo Yoga Slim 7i Aura (15ILL9), where system fans and keyboard
backlights fail to resume after suspend (Jakob Riemenschneider)
- Add sysfs attribute cid for exposing _CID lists under ACPI device
objects (Rafael Wysocki)
- Replace sprintf() with sysfs_emit() in all of the core ACPI sysfs
interface code (Sumeet Pawnikar)
- Use acpi_get_local_u64_address() in the code implementing ACPI
support for PCI to evaluate _ADR instead of evaluating that object
directly (Andy Shevchenko)
- Add JWIPC JVC9100 to irq1_level_low_skip_override[] to unbreak
serial IRQs on that system (Ai Chao)
- Fix handling of _OSC errors in acpi_run_osc() to avoid failures on
systems where _OSC error bits are set even though the _OSC return
buffer contains acknowledged feature bits (Rafael Wysocki)
- Clean up and rearrange \_SB._OSC handling for general platform
features and USB4 features to avoid code duplication and unnecessary
memory management overhead (Rafael Wysocki)
- Make the ACPI core device enumeration code handle PNP0C01 and PNP0C02
("system resource") device objects directly instead of letting the
legacy PNP system driver handle them to avoid device enumeration
issues on systems where PNP0C02 is present in the _CID list under
ACPI device objects with a _HID matching a proper device driver in
Linux (Rafael Wysocki)
- Drop workarounds for the known device enumeration issues related to
_CID lists containing PNP0C02 (Rafael Wysocki)
- Drop outdated comment regarding removed function in the ACPI-based
device enumeration code (Julia Lawall)
- Make PRP0001 device matching work as expected for ACPI device objects
using it as a _HID for board development and similar purposes (Kartik
Rajput)
- Use async schedule function in acpi_scan_clear_dep_fn() to avoid
races with user space initialization on some systems (Yicong Yang)
- Add a piece of documentation explaining why binding drivers directly
to ACPI device objects is not a good idea in general and why it is
desirable to convert drivers doing so into proper platform drivers
that use struct platform_driver for device binding (Rafael Wysocki)
- Convert multiple "core ACPI" drivers, including the NFIT ACPI device
driver, the generic ACPI button drivers, the generic ACPI thermal
zone driver, the ACPI hardware event device (HED) driver, the ACPI EC
driver, the ACPI SMBUS HC driver, the ACPI Smart Battery Subsystem
(SBS) driver, and the ACPI backlight (video) driver to proper platform
drivers that use struct platform_driver for device binding (Rafael
Wysocki)
- Use acpi_get_local_u64_address() in the ACPI backlight (video) driver
to evaluate _ADR instead of evaluating that object directly (Andy
Shevchenko)
- Convert the generic ACPI battery driver to a proper platform driver
using struct platform_driver for device binding (Rafael Wysocki)
- Fix incorrect charging status when current is zero in the generic
ACPI battery driver (Ata İlhan Köktürk)
- Use LIST_HEAD() for initializing a stack-allocated list in the
generic ACPI watchdog device driver (Can Peng)
- Rework the ACPI idle driver initialization to register it directly
from the common initialization code instead of doing that from a
CPU hotplug "online" callback and clean it up (Huisong Li, Rafael
Wysocki)
- Fix a possible NULL pointer dereference in
acpi_processor_errata_piix4() (Tuo Li)
- Make read-only array non_mmio_desc[] static const (Colin Ian King)
- Prevent the APEI GHES support code on ARM from accessing memory out
of bounds or going past the ARM processor CPER record buffer (Mauro
Carvalho Chehab)
- Prevent cper_print_fw_err() from dumping the entire memory on systems
with defective firmware (Mauro Carvalho Chehab)
- Improve ghes_notify_nmi() status check to avoid unnecessary overhead
in the NMI handler by carrying out all of the requisite preparations
and the NMI registration time (Tony Luck)
- Refactor the GHES driver by extracting common functionality into
reusable helper functions to reduce code duplication and improve
the ghes_notify_sea() status check in analogy with the previous
ghes_notify_nmi() status check improvement (Shuai Xue)
- Make ELOG and GHES log and trace consistently and support the CPER
CXL protocol analogously (Fabio De Francesco)
- Disable KASAN instrumentation in the APEI GHES driver when compile
testing with clang < 18 (Nathan Chancellor)
- Let ghes_edac be the preferred driver to load on __ZX__ and _BYO_
systems by extending the platform detection list in the APEI GHES
driver (Tony W Wang-oc)
- Clean up cppc_perf_caps and cppc_perf_ctrls structs and rename EPP
constants for clarity in the ACPI CPPC library (Sumit Gupta)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmmErOoSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1wCoH/iWkTc5/kTTmzi5Urh9lsUsOL8Oc9hrx
KlH4XdLf9TUUSGPJtPRrrtXiOotNUSaZpg2ULktJAZHxDWXnA83DO0FjwT3+2WbH
/5YGVEK24Sae+DI38ukEvOI6bXrxxqNPLnFRtvV7tclUJD2OEAdKcUd8Y98s9qNf
64bf2gKoQtbZj0eM33KHiotULYZUNoZ2SWKFAWXzKQr7EOkcQGKcuupeStgQ04Id
uumWr+lIgW5vYPOcPFCufE3+LM0MzDvruxBlMJQEJJFVkY4IEFwwJNGW/lo8hgE3
74pFKqOPhYsIFPM8rtKXS+JmjP22iCI49QjnHIsQdDG03GEKvKFFeCw=
=CG0j
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"This one is significantly larger than previous ACPI support pull
requests because several significant updates have coincided in it.
First, there is a routine ACPICA code update, to upstream version
20251212, but this time it covers new ACPI 6.6 material that has not
been covered yet. Among other things, it includes definitions of a few
new ACPI tables and updates of some others, like the GICv5 MADT
structures and ARM IORT IWB node definitions that are used for adding
GICv5 ACPI probing on ARM (that technically is IRQ subsystem material,
but it depends on the ACPICA changes, so it is included here). The
latter alone adds a few hundred lines of new code.
Second, there is an update of ACPI _OSC handling including a fix that
prevents failures from occurring in some corner cases due to careless
handling of _OSC error bits.
On top of that, the "system resource" ACPI device objects with the
PNP0C01 and PNP0C02 are now going to be handled by the ACPI core
device enumeration code instead of handing them over to the legacy PNP
system driver which causes device enumeration issues to occur. Some of
those issues have been worked around in device drivers and elsewhere
and those workarounds should not be necessary any more, so they are
going away.
Moreover, the time has come to convert all "core ACPI" device drivers
that were still using struct acpi_driver objects for device binding
into proper platform drivers that use struct platform_driver for this
purpose. These updates are accompanied by some requisite core ACPI
device enumeration code changes.
Next, there are ACPI APEI updates, including changes to avoid excess
overhead in the NMI handler and in SEA on the ARM side, changes to
unify ACPI-based HW error tracing and logging, and changes to prevent
APEI code from reaching out of its allocated memory.
There are also some ACPI power management updates, mostly related to
the ACPI cpuidle support in the processor driver, suspend-to-idle
handling on systems with ACPI support and to ACPI PM of devices.
In addition to the above, bugs are fixed and the code is cleaned up in
assorted places all over.
Specifics:
- Update the ACPICA code in the kernel to upstream version 20251212
which includes the following changes:
* Add support for new ACPI table DTPR (Michal Camacho Romero)
* Release objects with acpi_ut_delete_object_desc() (Zilin Guan)
* Add UUIDs for Microsoft fan extensions and UUIDs associated with
TPM 2.0 devices (Armin Wolf)
* Fix NULL pointer dereference in acpi_ev_address_space_dispatch()
(Alexey Simakov)
* Add KEYP ACPI table definition (Dave Jiang)
* Add support for the Microsoft display mux _OSI string (Armin
Wolf)
* Add definitions for the IOVT ACPI table (Xianglai Li)
* Abort AML bytecode execution on AML_FATAL_OP (Armin Wolf)
* Include all fields in subtable type1 for PPTT (Ben Horgan)
* Add GICv5 MADT structures and Arm IORT IWB node definitions
(Jose Marinho)
* Update Parameter Block structure for RAS2 and add a new flag in
Memory Affinity Structure for SRAT (Pawel Chmielewski)
* Add _VDM (Voltage Domain) object (Pawel Chmielewski)
- Add support for GICv5 ACPI probing on ARM which is based on the
GICv5 MADT structures and ARM IORT IWB node definitions recently
added to ACPICA (Lorenzo Pieralisi)
- Rework ACPI PM notification setup for PCI root buses and modify the
ACPI PM setup for devices to register wakeup source objects under
physical (that is, PCI, platform, etc.) devices instead of doing
that under their ACPI companions (Rafael Wysocki)
- Adjust debug messages regarding postponed ACPI PM printed during
system resume to be more accurate (Rafael Wysocki)
- Remove dead code from lps0_device_attach() (Gergo Koteles)
- Start to invoke Microsoft Function 9 (Turn On Display) of the Low-
Power S0 Idle (LPS0) _DSM in the suspend-to-idle resume flow on
systems with ACPI LPS0 support to address a functional issue on
Lenovo Yoga Slim 7i Aura (15ILL9), where system fans and keyboard
backlights fail to resume after suspend (Jakob Riemenschneider)
- Add sysfs attribute cid for exposing _CID lists under ACPI device
objects (Rafael Wysocki)
- Replace sprintf() with sysfs_emit() in all of the core ACPI sysfs
interface code (Sumeet Pawnikar)
- Use acpi_get_local_u64_address() in the code implementing ACPI
support for PCI to evaluate _ADR instead of evaluating that object
directly (Andy Shevchenko)
- Add JWIPC JVC9100 to irq1_level_low_skip_override[] to unbreak
serial IRQs on that system (Ai Chao)
- Fix handling of _OSC errors in acpi_run_osc() to avoid failures on
systems where _OSC error bits are set even though the _OSC return
buffer contains acknowledged feature bits (Rafael Wysocki)
- Clean up and rearrange \_SB._OSC handling for general platform
features and USB4 features to avoid code duplication and
unnecessary memory management overhead (Rafael Wysocki)
- Make the ACPI core device enumeration code handle PNP0C01 and
PNP0C02 ("system resource") device objects directly instead of
letting the legacy PNP system driver handle them to avoid device
enumeration issues on systems where PNP0C02 is present in the _CID
list under ACPI device objects with a _HID matching a proper device
driver in Linux (Rafael Wysocki)
- Drop workarounds for the known device enumeration issues related to
_CID lists containing PNP0C02 (Rafael Wysocki)
- Drop outdated comment regarding removed function in the ACPI-based
device enumeration code (Julia Lawall)
- Make PRP0001 device matching work as expected for ACPI device
objects using it as a _HID for board development and similar
purposes (Kartik Rajput)
- Use async schedule function in acpi_scan_clear_dep_fn() to avoid
races with user space initialization on some systems (Yicong Yang)
- Add a piece of documentation explaining why binding drivers
directly to ACPI device objects is not a good idea in general and
why it is desirable to convert drivers doing so into proper
platform drivers that use struct platform_driver for device binding
(Rafael Wysocki)
- Convert multiple "core ACPI" drivers, including the NFIT ACPI
device driver, the generic ACPI button drivers, the generic ACPI
thermal zone driver, the ACPI hardware event device (HED) driver,
the ACPI EC driver, the ACPI SMBUS HC driver, the ACPI Smart
Battery Subsystem (SBS) driver, and the ACPI backlight (video)
driver to proper platform drivers that use struct platform_driver
for device binding (Rafael Wysocki)
- Use acpi_get_local_u64_address() in the ACPI backlight (video)
driver to evaluate _ADR instead of evaluating that object directly
(Andy Shevchenko)
- Convert the generic ACPI battery driver to a proper platform driver
using struct platform_driver for device binding (Rafael Wysocki)
- Fix incorrect charging status when current is zero in the generic
ACPI battery driver (Ata İlhan Köktürk)
- Use LIST_HEAD() for initializing a stack-allocated list in the
generic ACPI watchdog device driver (Can Peng)
- Rework the ACPI idle driver initialization to register it directly
from the common initialization code instead of doing that from a
CPU hotplug "online" callback and clean it up (Huisong Li, Rafael
Wysocki)
- Fix a possible NULL pointer dereference in
acpi_processor_errata_piix4() (Tuo Li)
- Make read-only array non_mmio_desc[] static const (Colin Ian King)
- Prevent the APEI GHES support code on ARM from accessing memory out
of bounds or going past the ARM processor CPER record buffer (Mauro
Carvalho Chehab)
- Prevent cper_print_fw_err() from dumping the entire memory on
systems with defective firmware (Mauro Carvalho Chehab)
- Improve ghes_notify_nmi() status check to avoid unnecessary
overhead in the NMI handler by carrying out all of the requisite
preparations and the NMI registration time (Tony Luck)
- Refactor the GHES driver by extracting common functionality into
reusable helper functions to reduce code duplication and improve
the ghes_notify_sea() status check in analogy with the previous
ghes_notify_nmi() status check improvement (Shuai Xue)
- Make ELOG and GHES log and trace consistently and support the CPER
CXL protocol analogously (Fabio De Francesco)
- Disable KASAN instrumentation in the APEI GHES driver when compile
testing with clang < 18 (Nathan Chancellor)
- Let ghes_edac be the preferred driver to load on __ZX__ and _BYO_
systems by extending the platform detection list in the APEI GHES
driver (Tony W Wang-oc)
- Clean up cppc_perf_caps and cppc_perf_ctrls structs and rename EPP
constants for clarity in the ACPI CPPC library (Sumit Gupta)"
* tag 'acpi-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (117 commits)
ACPI: battery: fix incorrect charging status when current is zero
ACPI: scan: Use async schedule function in acpi_scan_clear_dep_fn()
ACPI: x86: s2idle: Invoke Microsoft _DSM Function 9 (Turn On Display)
ACPI: APEI: GHES: Add ghes_edac support for __ZX__ and _BYO_ systems
ACPI: APEI: GHES: Disable KASAN instrumentation when compile testing with clang < 18
ACPI: sysfs: Replace sprintf() with sysfs_emit()
ACPI: CPPC: Rename EPP constants for clarity
ACPI: CPPC: Clean up cppc_perf_caps and cppc_perf_ctrls structs
ACPI: processor: idle: Rework the handling of acpi_processor_ffh_lpi_probe()
ACPI: processor: idle: Convert acpi_processor_setup_cpuidle_dev() to void
ACPI: processor: idle: Convert acpi_processor_setup_cpuidle_states() to void
irqchip/gic-v5: Add ACPI IWB probing
irqchip/gic-v5: Add ACPI ITS probing
irqchip/gic-v5: Add ACPI IRS probing
irqchip/gic-v5: Split IRS probing into OF and generic portions
PCI/MSI: Make the pci_msi_map_rid_ctlr_node() interface firmware agnostic
irqdomain: Add parent field to struct irqchip_fwid
ACPI: PCI: simplify code with acpi_get_local_u64_address()
ACPI: video: simplify code with acpi_get_local_u64_address()
ACPI: PM: Adjust messages regarding postponed ACPI PM
...
- Relax Kconfig so tegra194 can be built for platforms beyond Tegra194
(Vidya Sagar)
* pci/controller/tegra194:
PCI: dwc: tegra194: Broaden architecture dependency
- Export irq_domain_free_irqs() to allow PCI/MSI drivers that tear down
MSI domains to be built as modules (Aaron Kling)
- Export tegra_cpuidle_pcie_irqs_in_use(), which disables Tegra CC6 while
PCI IRQs are in use, so pci-tegra can be built as a module (Aaron Kling)
- Allow pci-tegra to be built as a module (Aaron Kling)
* pci/controller/tegra:
PCI: tegra: Allow building as a module
cpuidle: tegra: Export tegra_cpuidle_pcie_irqs_in_use()
irqdomain: Export irq_domain_free_irqs()
- Use pci_generic_config_write(), not custom wrapper, since we don't need
the writability provided by the wrapper (Claudiu Beznea)
- Drop lock around RZG3S_PCI_MSIRS and RZG3S_PCI_PINTRCVIS updates since
they are RW1C registers (Claudiu Beznea)
- Fix a device node reference leak in rzg3s_pcie_host_parse_port() (Felix
Gu)
* pci/controller/rzg3s-host:
PCI: rzg3s-host: Fix device node reference leak in rzg3s_pcie_host_parse_port()
PCI: rzg3s-host: Drop the lock on RZG3S_PCI_MSIRS and RZG3S_PCI_PINTRCVIS
PCI: rzg3s-host: Use pci_generic_config_write() for the root bus
- Use regulator APIs to control the 3v3 power supply of PCIe slots (Hal
Feng)
* pci/controller/plda-starfive:
PCI: starfive: Use regulator APIs to control the 3v3 power supply of PCIe slots
- Add DT binding and driver support for SA8255p Endpoint being managed by
firmware (Mrinmay Sarkar)
* pci/controller/dwc-qcom-ep:
PCI: qcom-ep: Add support for firmware-managed PCIe Endpoint
dt-bindings: PCI: qcom,sa8255p-pcie-ep: Document firmware managed PCIe endpoint
- Parse PERST# from all PCIe bridge nodes for future platforms that will
have PERST# in Switch Downstream Ports as well as in Root Ports
(Manivannan Sadhasivam)
- Rename qcom PERST# assert/deassert helpers, e.g., qcom_ep_reset_assert(),
to avoid confusion with Endpoint interfaces (Manivannan Sadhasivam)
* pci/controller/dwc-qcom:
PCI: qcom: Rename PERST# assert/deassert helpers for uniformity
PCI: qcom: Parse PERST# from all PCIe bridge nodes
# Conflicts:
# drivers/pci/controller/dwc/pcie-qcom.c
- Add DT binding and driver support for an optional external refclock in
addition to the refclock from the internal PLL (Richard Zhu)
- Apply i.MX95 ERR051586 erratum workaround (release CLKREQ# so endpoint
can assert it when required) during resume (Richard Zhu)
- Enable i.MX95 REFCLK by overriding CLKREQ# so it's driven by default
(Richard Zhu)
- Clear CLKREQ# override if link is up and DT says 'supports-clkreq' so
endpoints can use CLKREQ# to exit the L1.2 state (Richard Zhu)
* pci/controller/dwc-imx6:
PCI: imx6: Clear CLKREQ# override if 'supports-clkreq' DT property is available
PCI: imx6: Add CLKREQ# override to enable REFCLK for i.MX95 PCIe
PCI: dwc: Invoke post_init in dw_pcie_resume_noirq()
PCI: imx6: Add external reference clock input mode support
dt-bindings: PCI: pci-imx6: Add external reference clock input
dt-bindings: PCI: dwc: Add external reference clock input
- Extend PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() to return a
pointer to the preceding Capability (Qiang Yu)
- Add dw_pcie_remove_capability() and dw_pcie_remove_ext_capability() to
remove Capabilities that are advertised but not fully implemented (Qiang
Yu)
- Remove MSI and MSI-X Capabilities for DWC controllers in platforms that
can't support them, so we automatically fall back to INTx (Qiang Yu)
- Remove MSI-X and DPC Capabilities for Qualcomm platforms that advertise
but don't support them (Qiang Yu)
- Remove duplicate dw_pcie_ep_hide_ext_capability() function and replace
with dw_pcie_remove_ext_capability() (Qiang Yu)
- Add ASPM L1.1 and L1.2 Substates context to debugfs ltssm_status for
drivers that support this (Shawn Lin)
- Skip PME_Turn_Off broadcast and L2/L3 transition during suspend if link
is not up to avoid an unnecessary timeout (Manivannan Sadhasivam)
- Revert dw-rockchip, qcom, and DWC core changes that used link-up IRQs to
trigger enumeration instead of waiting for link to be up because the PCI
core doesn't allocate bus number space for hierarchies that might be
attached (Niklas Cassel)
- Make endpoint iATU entry for MSI permanent instead of programming it
dynamically, which is slow and racy with respect to other concurrent
traffic, e.g., eDMA (Koichiro Den)
- Use iMSI-RX MSI target address when possible to fix endpoints using
32-bit MSI (Shawn Lin)
- Make dw_pcie_ltssm_status_string() available and use it for logging
errors in dw_pcie_wait_for_link() (Manivannan Sadhasivam)
- Return -ENODEV when dw_pcie_wait_for_link() finds no devices, -EIO for
device present but inactive, -ETIMEDOUT for other failures, so callers
can handle these cases differently (Manivannan Sadhasivam)
- Allow DWC host controller driver probe to continue if device is not found
or found but inactive; only fail when there's an error with the link
(Manivannan Sadhasivam)
- For controllers like NXP i.MX6QP and i.MX7D, where LTSSM registers are
not accessible after PME_Turn_Off, simply wait 10ms instead of polling
for L2/L3 Ready (Richard Zhu)
- Use multiple iATU entries to map large bridge windows and DMA ranges when
necessary instead of failing (Samuel Holland)
- Rename struct dw_pcie_rp.has_msi_ctrl to .use_imsi_rx for clarity (Qiang
Yu)
- Add EPC dynamic_inbound_mapping feature bit for Endpoint Controllers that
can update BAR inbound address translation without requiring EPF driver
to clear/reset the BAR first, and advertise it for DWC-based Endpoints
(Koichiro Den)
- Add EPC subrange_mapping feature bit for Endpoint Controllers that can
map multiple independent inbound regions in a single BAR, implement
subrange mapping, advertise it for DWC-based Endpoints, and add Endpoint
selftests for it (Koichiro Den)
- Allow overriding default BAR sizes for pci-epf-test (Niklas Cassel)
- Make resizable BARs work for Endpoint multi-PF configurations; previously
it only worked for PF 0 (Aksh Garg)
- Fix Endpoint non-PF 0 support for BAR configuration, ATU mappings, and
Address Match Mode (Aksh Garg)
- Fix issues with outbound iATU index assignment that caused iATU index to
be out of bounds (Niklas Cassel)
- Clean up iATU index tracking to be consistent (Niklas Cassel)
- Set up iATU when ECAM is enabled; previously IO and MEM outbound windows
weren't programmed, and ECAM-related iATU entries weren't restored after
suspend/resume, so config accesses failed (Krishna Chaitanya Chundru)
* pci/controller/dwc:
PCI: dwc: Fix missing iATU setup when ECAM is enabled
PCI: dwc: Clean up iATU index usage in dw_pcie_iatu_setup()
PCI: dwc: Fix msg_atu_index assignment
PCI: dwc: ep: Add comment explaining controller level PTM access in multi PF setup
PCI: dwc: ep: Add per-PF BAR and inbound ATU mapping support
PCI: dwc: ep: Fix resizable BAR support for multi-PF configurations
PCI: endpoint: pci-epf-test: Allow overriding default BAR sizes
selftests: pci_endpoint: Add BAR subrange mapping test case
misc: pci_endpoint_test: Add BAR subrange mapping test case
PCI: endpoint: pci-epf-test: Add BAR subrange mapping test support
Documentation: PCI: endpoint: Clarify pci_epc_set_bar() usage
PCI: dwc: ep: Support BAR subrange inbound mapping via Address Match Mode iATU
PCI: dwc: Advertise dynamic inbound mapping support
PCI: endpoint: Add BAR subrange mapping support
PCI: endpoint: Add dynamic_inbound_mapping EPC feature
PCI: dwc: Rename dw_pcie_rp::has_msi_ctrl to dw_pcie_rp::use_imsi_rx for clarity
PCI: dwc: Fix grammar and formatting for comment in dw_pcie_remove_ext_capability()
PCI: dwc: Use multiple iATU windows for mapping large bridge windows and DMA ranges
PCI: dwc: Remove duplicate dw_pcie_ep_hide_ext_capability() function
PCI: dwc: Skip waiting for L2/L3 Ready if dw_pcie_rp::skip_l23_wait is true
PCI: dwc: Fail dw_pcie_host_init() if dw_pcie_wait_for_link() returns -ETIMEDOUT
PCI: dwc: Rework the error print of dw_pcie_wait_for_link()
PCI: dwc: Rename and move ltssm_status_string() to pcie-designware.c
PCI: dwc: Return -EIO from dw_pcie_wait_for_link() if device is not active
PCI: dwc: Return -ENODEV from dw_pcie_wait_for_link() if device is not found
PCI: dwc: Use cfg0_base as iMSI-RX target address to support 32-bit MSI devices
PCI: dwc: ep: Cache MSI outbound iATU mapping
Revert "PCI: dwc: Don't wait for link up if driver can detect Link Up event"
Revert "PCI: qcom: Enumerate endpoints based on Link up event in 'global_irq' interrupt"
Revert "PCI: qcom: Enable MSI interrupts together with Link up if 'Global IRQ' is supported"
Revert "PCI: qcom: Don't wait for link if we can detect Link Up"
Revert "PCI: dw-rockchip: Enumerate endpoints based on dll_link_up IRQ"
Revert "PCI: dw-rockchip: Don't wait for link since we can detect Link Up"
PCI: dwc: Skip PME_Turn_Off broadcast and L2/L3 transition during suspend if link is not up
PCI: dw-rockchip: Change get_ltssm() to provide L1 Substates info
PCI: dwc: Add L1 Substates context to ltssm_status of debugfs
PCI: qcom: Remove DPC Extended Capability
PCI: qcom: Remove MSI-X Capability for Root Ports
PCI: dwc: Remove MSI/MSIX capability for Root Port if iMSI-RX is used as MSI controller
PCI: dwc: Add new APIs to remove standard and extended Capability
PCI: Add preceding capability position support in PCI_FIND_NEXT_*_CAP macros
- Add config guards to fix build error when sg2042 is a module but j721e is
built-in (Siddharth Vadapalli)
* pci/controller/cadence-j721e:
PCI: j721e: Add config guards for Cadence Host and Endpoint library APIs
- Fix cdns_pcie_host_dma_ranges_cmp() to prevent possible invalid sort
order (Ian Rogers)
* pci/controller/cadence:
PCI: cadence: Avoid signed 64-bit truncation and invalid sort
- Add WQ_PERCPU to alloc_workqueue() users (Marco Crivellari)
- Replace use of system_wq with system_percpu_wq (Marco Crivellari)
- Check for failure of alloc_workqueue() to avoid NULL pointer dereferences
(Haotian Zhang)
* pci/workqueue:
PCI: endpoint: Add missing NULL check for alloc_workqueue()
PCI: endpoint: Replace use of system_wq with system_percpu_wq
PCI: Add WQ_PERCPU to alloc_workqueue() users
# Conflicts:
# drivers/pci/endpoint/pci-ep-cfs.c
- Mark ASM1164 SATA controller to avoid bus reset since it fails to train
the Link after reset (Alex Williamson)
- Mark Nvidia GB10 Root Ports to avoid bus reset since they may fail to
retrain the link after reset (Johnny-CC Chang)
- Add lockdep and other lock assertions (Ilpo Järvinen)
- Add ACS quirk for Qualcomm Hamoa & Glymur, which provides ACS-like
features but doesn't advertise an ACS Capability (Krishna Chaitanya
Chundru)
- Add ACS quirk for Pericom PI7C9X2G404 switches, which fail under load
when P2P Redirect Request is enabled (Nicolas Cavallari)
- Remove an incorrect unlock in pci_slot_trylock() error handling (Jinhui
Guo)
- Lock the bridge device for slot reset (Keith Busch)
- Enable ACS after IOMMU configuration on OF platforms so ACS is enabled an
all devices; previously the first device enumeration (typically a Root
Port) was omitted (Manivannan Sadhasivam)
- Disable ACS Source Validation for IDT 0x80b5 and 0x8090 switches to work
around hardware erratum; previously ACS SV was temporarily disabled,
which worked for enumeration but not after reset (Manivannan Sadhasivam)
* pci/virtualization:
PCI: Disable ACS SV for IDT 0x8090 switch
PCI: Disable ACS SV for IDT 0x80b5 switch
PCI: Cache ACS Capabilities register
PCI: Enable ACS after configuring IOMMU for OF platforms
PCI: Add ACS quirk for Pericom PI7C9X2G404 switches [12d8:b404]
PCI: Add ACS quirk for Qualcomm Hamoa & Glymur
PCI: Use device_lock_assert() to verify device lock is held
PCI: Use lockdep_assert_held(pci_bus_sem) to verify lock is held
PCI: Fix pci_slot_lock () device locking
PCI: Fix pci_slot_trylock() error handling
PCI: Mark Nvidia GB10 to avoid bus reset
PCI: Mark ASM1164 SATA controller to avoid bus reset
- Build zero-sized resources when a BAR is larger than 4G but
pci_bus_addr_t or resource_size_t can't represent 64-bit addresses (Ilpo
Järvinen)
- Fix bridge window alignment with optional resources, where we previously
lost the additional alignment requirement (Ilpo Järvinen)
- Stop over-estimating bridge window size since we now assign them without
any gaps between them (Ilpo Järvinen)
- Increase resource MAX_IORES_LEVEL to avoid /proc/iomem flattening for
nested bridges and endpoints (Ilpo Järvinen)
- Remove old_size limit from bridge window sizing (Ilpo Järvinen)
- Push realloc check into pbus_size_mem() to simplify callers (Ilpo
Järvinen)
- Pass bridge window resource to pbus_size_mem() to avoid looking it up
again (Ilpo Järvinen)
- Use res_to_dev_res() instead of open-coding the same search (Ilpo
Järvinen)
- Add pci_resource_is_bridge_win() helper (Ilpo Järvinen)
- Add more logging of resource assignment (Ilpo Järvinen)
- Add pbus_mem_size_optional() to handle sizes of optional resources
(SR-IOV VF BARs, expansion ROMs, bridge windows) (Ilpo Järvinen)
- Move CardBus code to setup-cardbus.c and only build it when
CONFIG_CARDBUS is set (Ilpo Järvinen)
- Use scnprintf() instead of sprintf() (Ilpo Järvinen)
- Add pbus_validate_busn() for Bus Number validation (Ilpo Järvinen)
- Don't claim disabled bridge windows to avoid spurious claim failures
(Ilpo Järvinen)
* pci/resource:
PCI: Don't claim disabled bridge windows
PCI: Move CardBus bridge scanning to setup-cardbus.c
PCI: Add pbus_validate_busn() for Bus Number validation
PCI: Add dword #defines for Bus Number + Secondary Latency Timer
PCI: Use scnprintf() instead of sprintf()
PCI: Handle CardBus-specific params in setup-cardbus.c
PCI: Separate CardBus setup & build it only with CONFIG_CARDBUS
PCI: Add 'pci' prefix to struct pci_dev_resource handling functions
PCI: Use resource_assigned() in setup-bus.c algorithm
resource: Mark res given to resource_assigned() as const
PCI: Add pbus_mem_size_optional() to handle optional sizes
PCI: Check invalid align earlier in pbus_size_mem()
PCI: Log reset and restore of resources
PCI: Add pci_resource_is_bridge_win()
PCI: Fetch dev_res to local var in __assign_resources_sorted()
PCI: Use res_to_dev_res() in reassign_resources_sorted()
PCI: Pass bridge window resource to pbus_size_mem()
PCI: Push realloc check into pbus_size_mem()
PCI: Remove old_size limit from bridge window sizing
resource: Increase MAX_IORES_LEVEL to 8
PCI: Stop over-estimating bridge window size
PCI: Rewrite bridge window head alignment function
PCI: Fix bridge window alignment with optional resources
PCI: Use resource_set_range() that correctly sets ->end
- Rename pwrseq, tc9563, and slot driver structs, variables, and functions
for consistency (Bjorn Helgaas)
- Add power_on/off callbacks with generic signature to pwrseq, tc9563, and
slot drivers so they can be used by pwrctrl core (Manivannan Sadhasivam)
- Add interfaces to create and destroy pwrctrl devices (Krishna Chaitanya
Chundru)
- Add interfaces to power devices on and off (Manivannan Sadhasivam)
- Switch to pwrctrl interfaces to create, destroy, and power on/off
devices, calling them from host controller drivers instead of the PCI
core (Manivannan Sadhasivam)
- Drop qcom .assert_perst() callbacks since this is now done by the
controller driver instead of the pwrctrl driver (Manivannan Sadhasivam)
- Add PCIe M.2 connector support to the slot pwrctrl driver (Manivannan
Sadhasivam)
- Create pwrctrl devices for devicetree PCIe M.2 connector nodes
(Manivannan Sadhasivam)
* pci/pwrctrl:
PCI/pwrctrl: Create pwrctrl device if graph port is found
PCI/pwrctrl: Add PCIe M.2 connector support
PCI: Drop the assert_perst() callback
PCI: qcom: Drop the assert_perst() callbacks
PCI/pwrctrl: Switch to pwrctrl create, power on/off, destroy APIs
PCI/pwrctrl: Add APIs to power on/off pwrctrl devices
PCI/pwrctrl: Add APIs to create, destroy pwrctrl devices
PCI/pwrctrl: Add 'struct pci_pwrctrl::power_{on/off}' callbacks
PCI/pwrctrl: pwrseq: Factor out power on/off code to helpers
PCI/pwrctrl: slot: Factor out power on/off code to helpers
PCI/pwrctrl: tc9563: Rename private struct and pointers for consistency
PCI/pwrctrl: tc9563: Add local variables to reduce repetition
PCI/pwrctrl: tc9563: Clean up whitespace
PCI/pwrctrl: tc9563: Use put_device() instead of i2c_put_adapter()
PCI/pwrctrl: slot: Rename private struct and pointers for consistency
PCI/pwrctrl: pwrseq: Rename private struct and pointers for consistency
# Conflicts:
# drivers/pci/bus.c
- Drop device reference unconditionally in pcie_port_remove_service() to
fix resource leak (Uwe Kleine-König)
- Remove empty pcie_port_shutdown_service() callback (Uwe Kleine-König)
- Remove unnecessary bus_type check in pcie_port_bus_match() (Uwe
Kleine-König)
- Move pcie_port_bus_match() and pcie_port_bus_type to PCIe-specific
portdrv.c (Uwe Kleine-König)
- Remove unnecessary dev and dev->driver checks in portdrv .probe() and
.remove() (Uwe Kleine-König)
- Take advantage of pcie_port_bus_type.probe() and .remove() instead of
assigning them for each portdrv service driver (Uwe Kleine-König)
* pci/portdrv:
PCI/portdrv: Use bus-type functions
PCI/portdrv: Don't check for valid device and driver in bus callbacks
PCI/portdrv: Move pcie_port_bus_type to pcie source file
PCI/portdrv: Don't check for the driver's and device's bus
PCI/portdrv: Drop empty shutdown callback
PCI/portdrv: Fix potential resource leak
- Avoid redundant delay on transition from D3hot to D3cold if the device
was already in D3hot (Brian Norris)
- Prevent runtime suspend until devices are fully initialized to avoid
saving incompletely configured device state (Brian Norris)
* pci/pm:
PCI/PM: Prevent runtime suspend until devices are fully initialized
PCI/PM: Avoid redundant delays on D3hot->D3cold
- Add PCI_BRIDGE_NO_ALIAS quirk for ASPEED AST1150, where VGA and USB are
behind a PCIe-to-PCI bridge and share the same StreamID (Nirmoy Das)
* pci/iommu:
PCI: Add PCI_BRIDGE_NO_ALIAS quirk for ASPEED AST1150
PCI: Add ASPEED vendor ID to pci_ids.h
- Skip enabling ExtTag on VFs since that bit is Reserved and causes
misleading log messages (Håkon Bugge)
- Mark 3ware-9650SA Root Port Extended Tags as broken since 9650SA can't
handle 8-bit tags (Jörg Wedekind)
- Release domain number from the correct IDA when a PCI host bridge has no
parent device (Sergey Shtylyov)
- Initialize endpoint Read Completion Boundary to match Root Port,
regardless of ACPI _HPX (Håkon Bugge)
- Apply _HPX PCIe Setting Record only to AER configuration, and only when
OS owns PCIe hotplug but not AER, to avoid clobbering Extended Tag and
Relaxed Ordering settings (Håkon Bugge)
- Clear PCIe Root Status register with a write, not a read/modify/write
(Lukas Wunner)
* pci/enumeration:
PCI/PME: Replace RMW of Root Status register with direct write
PCI/ACPI: Restrict program_hpx_type2() to AER bits
PCI: Initialize RCB from pci_configure_device()
PCI: Check parent for NULL in of_pci_bus_release_domain_nr()
PCI: Mark 3ware-9650SA Root Port Extended Tags as broken
PCI: Do not attempt to set ExtTag for VFs
The commit 665745f274 ("PCI/bwctrl: Re-add BW notification portdrv as
PCIe BW controller") was found to lead to a boot hang on a Intel P45
system. Testing without setting Link Bandwidth Management Interrupt Enable
(LBMIE) and Link Autonomous Bandwidth Interrupt Enable (LABIE) (PCIe r7.0,
sec 7.5.3.7) in bwctrl allowed system to come up.
P45 is a very old chipset and supports only up to gen2 PCIe, so not having
bwctrl does not seem a huge deficiency.
Add no_bw_notif in struct pci_dev and quirk Intel P45 Root Port with it.
Reported-by: Adam Stylinski <kungfujesus06@gmail.com>
Link: https://lore.kernel.org/linux-pci/aUCt1tHhm_-XIVvi@eggsbenedict/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Adam Stylinski <kungfujesus06@gmail.com>
Link: https://patch.msgid.link/20260116131513.2359-1-ilpo.jarvinen@linux.intel.com
The IDT switch with Device ID 0x8090 used in the ARM Juno R2 development
board incorrectly raises an ACS Source Validation error on Completions for
Config Read Requests, even though PCIe r7.0, sec 6.12.1.1, says that
Completions are never affected by ACS Source Validation.
This is already handled by the pci_disable_broken_acs_cap() quirk for the
IDT 0x80b5 switch. Extend the quirk for the 0x8090 device too.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://patch.msgid.link/20260102-pci_acs-v3-4-72280b94d288@oss.qualcomm.com
Some IDT switches incorrectly flag an ACS Source Validation error on
completions for config read requests before they have captured the bus
number from a previous config write, even though PCIe r7.0, sec 6.12.1.1,
says that completions are never affected by ACS Source Validation.
The previous workaround, aa667c6408 ("PCI: Workaround IDT switch ACS
Source Validation erratum"), temporarily disabled ACS SV during
enumeration. This was effective but didn't cover the time after switch
reset, when it may lose the captured bus number.
Avoid the issue by preventing use of ACS SV altogether for these switches
by calling pci_disable_broken_acs_cap() from pci_acs_init() and remove the
previous workaround in pci_bus_read_dev_vendor_id().
Removal of ACS SV for these switches means they no longer enforce
everything in REQ_ACS_FLAGS, so downstream devices are not isolated from
each other and the iommu_group may include more devices.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
[bhelgaas: commit log, retain specific erratum details]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://patch.msgid.link/20260102-pci_acs-v3-3-72280b94d288@oss.qualcomm.com
The ACS Capability register is read-only. Cache it to allow quirks to
override it and to avoid re-reading it.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://patch.msgid.link/20260102-pci_acs-v3-2-72280b94d288@oss.qualcomm.com
Platform, ACPI, or IOMMU drivers call pci_request_acs(), which sets
'pci_acs_enable' to request that ACS be enabled for any devices enumerated
in the future.
OF platforms called pci_enable_acs() for the first device before
of_iommu_configure() called pci_request_acs(), so ACS was never enabled for
that device (typically a Root Port).
Call pci_enable_acs() later, from pci_dma_configure(), after
of_dma_configure() has had a chance to call pci_request_acs().
Here's the call path, showing the move of pci_enable_acs() from
pci_acs_init() to pci_dma_configure(), where it always happens after
pci_request_acs():
pci_device_add
pci_init_capabilities
pci_acs_init
- pci_enable_acs
- if (pci_acs_enable) <-- previous test
- ...
device_add
bus_notify(BUS_NOTIFY_ADD_DEVICE)
iommu_bus_notifier
iommu_probe_device
iommu_init_device
dev->bus->dma_configure
pci_dma_configure # pci_bus_type.dma_configure
of_dma_configure
of_iommu_configure
pci_request_acs
pci_acs_enable = 1 <-- set
+ pci_enable_acs
+ if (pci_acs_enable) <-- new test
+ ...
bus_probe_device
device_initial_probe
...
really_probe
dev->bus->dma_configure
pci_dma_configure # pci_bus_type.dma_configure
...
pci_enable_acs
Note that we will now call pci_enable_acs() twice for every device, first
from the iommu_probe_device() path and again from the really_probe() path.
Presumably that's not an issue since we also call dev->bus->dma_configure()
twice.
For the ACPI platforms, pci_request_acs() is called during ACPI
initialization time itself, independent of the IOMMU framework.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://patch.msgid.link/20260102-pci_acs-v3-1-72280b94d288@oss.qualcomm.com
12d8:b404 is apparently another PCI ID for Pericom PI7C9X2G404 (as
identified by the chip silkscreen and lspci).
It is also affected by the PI7C9X2G errata (e.g. a network card attached
to it fails under load when P2P Redirect Request is enabled), so apply
the same quirk to this PCI ID too.
PCI bridge [0604]: Pericom Semiconductor PI7C9X2G404 EV/SV PCIe2 4-Port/4-Lane Packet Switch [12d8:b404] (rev 01)
Fixes: acd61ffb2f ("PCI: Add ACS quirk for Pericom PI7C9X2G switches")
Closes: https://lore.kernel.org/all/a1d926f0-4cb5-4877-a4df-617902648d80@green-communications.fr/
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260119160915.26456-1-nicolas.cavallari@green-communications.fr
The Qualcomm Hamoa & Glymur Root Ports don't advertise an ACS capability,
but they do provide ACS-like features to disable peer transactions and
validate bus numbers in requests.
Add an ACS quirk for Hamoa & Glymur.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260109-acs_quirk-v1-1-82adf95a89ae@oss.qualcomm.com
Multiple function comments say the function should be called with
device_lock held. Check that by calling device_lock_assert().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260116125742.1890-3-ilpo.jarvinen@linux.intel.com
The function comment for pci_bus_max_d3cold_delay() declares pci_bus_sem
must be held while calling the function which can be automatically checked.
Add lockdep_assert_held(pci_bus_sem) to confirm pci_bus_sem is held.
Also mark the comment line with Context prefix.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260116125742.1890-2-ilpo.jarvinen@linux.intel.com
Like pci_bus_lock(), pci_slot_lock() needs to lock the bridge device to
prevent warnings like:
pcieport 0000:e2:05.0: unlocked secondary bus reset via: pciehp_reset_slot+0x55/0xa0
Take and release the lock for the bridge providing the slot for the
lock/trylock and unlock routines.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20260130165953.751063-3-kbusch@meta.com
Commit a4e772898f ("PCI: Add missing bridge lock to pci_bus_lock()")
delegates the bridge device's pci_dev_trylock() to pci_bus_trylock() in
pci_slot_trylock(), but it forgets to remove the corresponding
pci_dev_unlock() when pci_bus_trylock() fails.
Before a4e772898f, the code did:
if (!pci_dev_trylock(dev)) /* <- lock bridge device */
goto unlock;
if (dev->subordinate) {
if (!pci_bus_trylock(dev->subordinate)) {
pci_dev_unlock(dev); /* <- unlock bridge device */
goto unlock;
}
}
After a4e772898f the bridge-device lock is no longer taken, but the
pci_dev_unlock(dev) on the failure path was left in place, leading to the
bug.
This yields one of two errors:
1. A warning that the lock is being unlocked when no one holds it.
2. An incorrect unlock of a lock that belongs to another thread.
Fix it by removing the now-redundant pci_dev_unlock(dev) on the failure
path.
[Same patch later posted by Keith at
https://patch.msgid.link/20260116184150.3013258-1-kbusch@meta.com]
Fixes: a4e772898f ("PCI: Add missing bridge lock to pci_bus_lock()")
Signed-off-by: Jinhui Guo <guojinhui.liam@bytedance.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251212145528.2555-1-guojinhui.liam@bytedance.com
After asserting Secondary Bus Reset to downstream devices via a GB10 Root
Port, the link may not retrain correctly, e.g., the link may retrain with a
lower lane count or config accesses to downstream devices may fail.
Prevent use of Secondary Bus Reset for devices below GB10.
Signed-off-by: Johnny-CC Chang <Johnny-CC.Chang@mediatek.com>
[bhelgaas: drop pci_ids.h update (only used once), update commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251113084441.2124737-1-Johnny-CC.Chang@mediatek.com
User forums report issues when assigning ASM1164 SATA controllers to VMs,
especially in configurations with multiple controllers. Logs show the
device fails to retrain after bus reset. Reports suggest this is an issue
across multiple platforms. The device indicates support for PM reset,
therefore the device still has a viable function level reset mechanism.
The reporting user confirms the device is well behaved in this use case
with bus reset disabled.
Reported-by: Patrick Bianchi <patrick.w.bianchi@gmail.com>
Link: https://forum.proxmox.com/threads/problems-with-pcie-passthrough-with-two-identical-devices.149003/
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260109000211.398300-1-alex.williamson@nvidia.com
When pci_host_common_ecam_create() calls of_address_to_resource(), it
assumes all errors are due to a missing "reg" property in the device tree
node, when they may be due to a malformed "reg" property.
This can manifest when running the qemu "virt" board with a 32-bit kernel
and `highmem=on` and leads to the very confusing error message:
pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges:
pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000
pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000
pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000
pci-host-generic 4010000000.pcie: missing "reg" property
pci-host-generic 4010000000.pcie: probe with driver pci-host-generic failed with error -75
Make the error message more generic.
Link: https://www.qemu.org/docs/master/system/arm/virt.html
Signed-off-by: Jess <jess@jessie.cafe>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20260120004444.191093-1-jess@jessie.cafe
As of PCIe r7.0, the Root Status register contains a single writeable bit
(PME Status, type RW1C) and otherwise just read-only bits and RsvdZ bits
(which software must write as zero, PCIe r7.0 sec 7.4).
Thus, when clearing the PME Status bit, there's no need to perform a
read-modify-write of the register. Instead, the bit can be written
directly.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/39f87c99f6c44be3c0371c79e454e6fde7be0d4d.1761497583.git.lukas@wunner.de
Correctable and Uncorrectable Error Status Registers on reporting agents
are cleared upon PCI device enumeration in pci_aer_init() to flush past
events. They're cleared again when an error is handled by the AER driver.
If an agent reports a new error after pci_aer_init() and before the AER
driver has probed on the corresponding Root Port or Root Complex Event
Collector, that error is not handled by the AER driver: It clears the
Root Error Status Register on probe, but neglects to re-clear the
Correctable and Uncorrectable Error Status Registers on reporting agents.
The error will eventually be reported when another error occurs. Which
is irritating because to an end user it appears as if the earlier error
has just happened.
Amend the AER driver to clear stale errors on reporting agents upon probe.
Skip reporting agents which have not invoked pci_aer_init() yet to avoid
using an uninitialized pdev->aer_cap. They're recognizable by the error
bits in the Device Control register still being clear.
Reporting agents may execute pci_aer_init() after the AER driver has
probed, particularly when devices are hotplugged or removed/rescanned via
sysfs. For this reason, it continues to be necessary that pci_aer_init()
clears Correctable and Uncorrectable Error Status Registers.
Reported-by: Lucas Van <lucas.van@intel.com> # off-list
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Lucas Van <lucas.van@intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/3011c2ed30c11f858e35e29939add754adea7478.1769332702.git.lukas@wunner.de
The commit 8278c69143 ("PCI: Preserve bridge window resource type flags")
changed bridge window resource behavior such that flags are no longer zero
if the bridge window is not valid or is disabled (mainly to preserve the
type flags for later use). If a bridge window has its limit smaller than
base address, pci_read_bridge_*() sets both IORESOURCE_UNSET and
IORESOURCE_DISABLED to indicate the bridge window exists but is not valid
with the current base and limit configuration.
The code in pci_claim_bridge_resources() still depends on the old behavior
of checking validity of the bridge window solely based on !r->flags,
whereas after 8278c69143, also IORESOURCE_DISABLED may indicate bridge
window addresses are not valid.
While pci_claim_resource() does check IORESOURCE_UNSET,
pci_claim_bridge_resource() attempts to clip the resource if
pci_claim_resource() fails, which is not correct for bridge window
resources that are not valid. As pci_bus_clip_resource() performs clipping
regardless of flags and then clears IORESOURCE_UNSET, it should not be
called unless the resource is valid.
The problem is visible in this log:
pci 0000:20:00.0: PCI bridge to [bus 21]
pci 0000:20:00.0: bridge window [io size 0x0000 disabled]: can't claim; no address assigned
pci 0000:20:00.0: [io 0x0000-0xffffffffffffffff disabled] clipped to [io 0x0000-0xffff disabled]
Add IORESOURCE_DISABLED check in pci_claim_bridge_resources() to only
claim bridge windows that appear to have a valid configuration.
Fixes: 8278c69143 ("PCI: Preserve bridge window resource type flags")
Reported-by: Sizhe Liu <liusizhe5@huawei.com>
Link: https://lore.kernel.org/all/20260203023545.2753811-1-liusizhe5@huawei.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/4d9228d6-a230-6ddf-e300-fbf42d523863@linux.intel.com
In rzg3s_pcie_host_parse_port(), of_get_next_child() returns a device node
with an incremented reference count that must be released with
of_node_put(). The current code fails to call of_node_put() which causes a
reference leak.
Use the __free(device_node) attribute to ensure automatic cleanup when the
variable goes out of scope.
Fixes: 7ef502fb35 ("PCI: Add Renesas RZ/G3S host controller driver")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260204-rzg3s-v1-1-142bc81c3312@gmail.com
Merge ACPI APEI support updates for 6.20-rc1/7.0-rc1:
- Make read-only array non_mmio_desc[] static const (Colin Ian King)
- Prevent the APEI GHES support code on ARM from accessing memory out
of bounds or going past the ARM processor CPER record buffer (Mauro
Carvalho Chehab)
- Prevent cper_print_fw_err() from dumping the entire memory on systems
with defective firmware (Mauro Carvalho Chehab)
- Improve ghes_notify_nmi() status check to avoid unnecessary overhead
in the NMI handler by carrying out all of the requisite preparations
and the NMI registration time (Tony Luck)
- Refactor the GHES driver by extracting common functionality into
reusable helper functions to reduce code duplication and improve
the ghes_notify_sea() status check in analogy with the previous
ghes_notify_nmi() status check improvement (Shuai Xue)
- Make ELOG and GHES log and trace consistently and support the CPER
CXL protocol analogously (Fabio De Francesco)
- Disable KASAN instrumentation in the APEI GHES driver when compile
testing with clang < 18 (Nathan Chancellor)
- Let ghes_edac be the preferred driver to load on __ZX__ and _BYO_
systems by extending the platform detection list in the APEI GHES
driver (Tony W Wang-oc)
* acpi-apei:
ACPI: APEI: GHES: Add ghes_edac support for __ZX__ and _BYO_ systems
ACPI: APEI: GHES: Disable KASAN instrumentation when compile testing with clang < 18
ACPI: extlog: Trace CPER CXL Protocol Error Section
ACPI: APEI: GHES: Add helper to copy CPER CXL protocol error info to work struct
ACPI: APEI: GHES: Add helper for CPER CXL protocol errors checks
ACPI: extlog: Trace CPER PCI Express Error Section
ACPI: extlog: Trace CPER Non-standard Section Body
ACPI: APEI: GHES: Improve ghes_notify_sea() status check
ACPI: APEI: GHES: Extract helper functions for error status handling
ACPI: APEI: GHES: Improve ghes_notify_nmi() status check
EFI/CPER: don't dump the entire memory region
APEI/GHES: ensure that won't go past CPER allocated record
EFI/CPER: don't go past the ARM processor CPER record buffer
APEI/GHES: ARM processor Error: don't go past allocated memory
ACPI: APEI: EINJ: make read-only array non_mmio_desc static const
When ECAM is enabled, the driver skipped calling dw_pcie_iatu_setup()
before configuring ECAM iATU entries. This left IO and MEM outbound
windows unprogrammed, resulting in broken IO transactions. Additionally,
dw_pcie_config_ecam_iatu() was only called during host initialization,
so ECAM-related iATU entries were not restored after suspend/resume,
leading to failures in configuration space access
To resolve these issues, move the ECAM iATU configuration to
dw_pcie_iatu_setup(), and invoke dw_pcie_iatu_setup() when ECAM is
enabled.
Furthermore, add error checks in dw_pcie_prog_outbound_atu() and
dw_pcie_prog_inbound_atu() such that an error is returned if the caller is
trying to program an iATU that is outside the number of iATUs supported by
the controller.
Fixes: f6fd357f7a ("PCI: dwc: Prepare the driver for enabling ECAM mechanism using iATU 'CFG Shift Feature'")
Reported-by: Maciej W. Rozycki <macro@orcam.me.uk>
Closes: https://lore.kernel.org/all/alpine.DEB.2.21.2511280256260.36486@angie.orcam.me.uk/
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Co-developed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
[mani: used imperative tone]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hans Zhang <zhanghuabing@ecosda.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable+noautosel@kernel.org # depends on Clean up iATU index usage in dw_pcie_iatu_setup()
Link: https://patch.msgid.link/20260127151038.1484881-8-cassel@kernel.org
The current iATU index usage in dw_pcie_iatu_setup() is a mess.
For outbound address translation the index is incremented before usage.
For inbound address translation the index is incremented after usage.
Incrementing the index after usage make much more sense, and make the
index usage consistent for both outbound and inbound address translation.
Most likely, the overly complicated logic for the outbound address
translation is because the iATU at index 0 is reserved for CFG IOs
(dw_pcie_other_conf_map_bus()), however, we should be able to use the
exact same logic for the indexing of the outbound and inbound iATUs.
(Only the starting index should be different.)
Create two new variables ob_iatu_index and ib_iatu_index, which makes
it more clear from the name itself that it is a zeroes based index,
and only increment the index if the iATU configuration call succeeded.
Since we always check if there is an index available immediately before
programming the iATU, we can remove the useless "ranges exceed outbound
iATU size" warnings, as the code is already unreachable. For the same
reason, we can also remove the useless breaks outside of the while loops.
No functional changes intended.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hans Zhang <zhanghuabing@ecosda.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260127151038.1484881-7-cassel@kernel.org
