PCI: qcom: Power down PHY via PARF_PHY_CTRL before disabling rails/clocks

Some Qcom PCIe controller variants bring the PHY out of test power-down
(PHY_TEST_PWR_DOWN) during init. When the link is later transitioned to
D3cold and the driver disables PCIe clocks and/or regulators without
explicitly re-asserting PHY_TEST_PWR_DOWN, the PHY can remain partially
powered, leading to avoidable power leakage.

Update the init-path comments to reflect that PARF_PHY_CTRL is used to
power the PHY on. Also, for controller revisions that enable PHY power in
init (2.3.2, 2.3.3, 2.4.0, 2.7.0 and 2.9.0), explicitly power the PHY down
via PARF_PHY_CTRL in the deinit path before disabling clocks or regulators.

This ensures the PHY is put into a defined low-power state prior to
removing its supplies, preventing leakage when entering D3cold.

Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260429-d3cold-v5-3-89e9735b9df6@oss.qualcomm.com
This commit is contained in:
Krishna Chaitanya Chundru 2026-04-29 12:12:25 +05:30 committed by Manivannan Sadhasivam
parent 131a93dbcb
commit 8a847d3e9e

View File

@ -532,7 +532,7 @@ static int qcom_pcie_post_init_2_1_0(struct qcom_pcie *pcie)
u32 val;
int ret;
/* enable PCIe clocks and resets */
/* Force PHY out of lowest power state */
val = readl(pcie->parf + PARF_PHY_CTRL);
val &= ~PHY_TEST_PWR_DOWN;
writel(val, pcie->parf + PARF_PHY_CTRL);
@ -699,6 +699,12 @@ static int qcom_pcie_get_resources_2_3_2(struct qcom_pcie *pcie)
static void qcom_pcie_deinit_2_3_2(struct qcom_pcie *pcie)
{
struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
u32 val;
/* Force PHY to lowest power state*/
val = readl(pcie->parf + PARF_PHY_CTRL);
val |= PHY_TEST_PWR_DOWN;
writel(val, pcie->parf + PARF_PHY_CTRL);
clk_bulk_disable_unprepare(res->num_clks, res->clks);
regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
@ -731,7 +737,7 @@ static int qcom_pcie_post_init_2_3_2(struct qcom_pcie *pcie)
{
u32 val;
/* enable PCIe clocks and resets */
/* Force PHY out of lowest power state */
val = readl(pcie->parf + PARF_PHY_CTRL);
val &= ~PHY_TEST_PWR_DOWN;
writel(val, pcie->parf + PARF_PHY_CTRL);
@ -795,6 +801,12 @@ static int qcom_pcie_get_resources_2_4_0(struct qcom_pcie *pcie)
static void qcom_pcie_deinit_2_4_0(struct qcom_pcie *pcie)
{
struct qcom_pcie_resources_2_4_0 *res = &pcie->res.v2_4_0;
u32 val;
/* Force PHY to lowest power state*/
val = readl(pcie->parf + PARF_PHY_CTRL);
val |= PHY_TEST_PWR_DOWN;
writel(val, pcie->parf + PARF_PHY_CTRL);
reset_control_bulk_assert(res->num_resets, res->resets);
clk_bulk_disable_unprepare(res->num_clks, res->clks);
@ -863,6 +875,12 @@ static int qcom_pcie_get_resources_2_3_3(struct qcom_pcie *pcie)
static void qcom_pcie_deinit_2_3_3(struct qcom_pcie *pcie)
{
struct qcom_pcie_resources_2_3_3 *res = &pcie->res.v2_3_3;
u32 val;
/* Force PHY to lowest power state */
val = readl(pcie->parf + PARF_PHY_CTRL);
val |= PHY_TEST_PWR_DOWN;
writel(val, pcie->parf + PARF_PHY_CTRL);
clk_bulk_disable_unprepare(res->num_clks, res->clks);
}
@ -918,6 +936,7 @@ static int qcom_pcie_post_init_2_3_3(struct qcom_pcie *pcie)
u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
u32 val;
/* Force PHY out of lowest power state */
val = readl(pcie->parf + PARF_PHY_CTRL);
val &= ~PHY_TEST_PWR_DOWN;
writel(val, pcie->parf + PARF_PHY_CTRL);
@ -1013,7 +1032,7 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
/* configure PCIe to RC mode */
writel(DEVICE_TYPE_RC, pcie->parf + PARF_DEVICE_TYPE);
/* enable PCIe clocks and resets */
/* Force PHY out of lowest power state */
val = readl(pcie->parf + PARF_PHY_CTRL);
val &= ~PHY_TEST_PWR_DOWN;
writel(val, pcie->parf + PARF_PHY_CTRL);
@ -1084,6 +1103,12 @@ static void qcom_pcie_host_post_init_2_7_0(struct qcom_pcie *pcie)
static void qcom_pcie_deinit_2_7_0(struct qcom_pcie *pcie)
{
struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
u32 val;
/* Force PHY to lowest power state */
val = readl(pcie->parf + PARF_PHY_CTRL);
val |= PHY_TEST_PWR_DOWN;
writel(val, pcie->parf + PARF_PHY_CTRL);
clk_bulk_disable_unprepare(res->num_clks, res->clks);
@ -1188,6 +1213,12 @@ static int qcom_pcie_get_resources_2_9_0(struct qcom_pcie *pcie)
static void qcom_pcie_deinit_2_9_0(struct qcom_pcie *pcie)
{
struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0;
u32 val;
/* Force PHY to lowest power state */
val = readl(pcie->parf + PARF_PHY_CTRL);
val |= PHY_TEST_PWR_DOWN;
writel(val, pcie->parf + PARF_PHY_CTRL);
clk_bulk_disable_unprepare(res->num_clks, res->clks);
}
@ -1228,6 +1259,7 @@ static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie)
u32 val;
int i;
/* Force PHY out of lowest power state */
val = readl(pcie->parf + PARF_PHY_CTRL);
val &= ~PHY_TEST_PWR_DOWN;
writel(val, pcie->parf + PARF_PHY_CTRL);