mirror of
https://github.com/torvalds/linux.git
synced 2026-07-29 10:41:49 +02:00
c936d73057
1445801 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
c936d73057 |
arm64: BST C1200 eMMC DTS for v7.2
Black Sesame Technologies:
Enable eMMC controller on BST C1200 CDCU1.0 board:
- Add mmc0 node in bstc1200.dtsi (DWCMSHC SDHCI controller)
- Add fixed clock definition and reserved SRAM bounce buffer
- Enable mmc0 with 8-bit bus on CDCU1.0 ADAS 4C2G board
The MMC driver was merged via mmc-next in v7.1-rc1.
this is the remaining DTS piece.
Signed-off-by: Gordon Ge <gordon.ge@bst.ai>
-----BEGIN PGP SIGNATURE-----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=PSGj
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmorrtgACgkQmmx57+YA
GNmeWRAAqeG1uTDFQgztTLrAJTHmo/uTfCg2QHnm2UEQ4dJH+QDuTtQbJhrZDQ/4
h2EI0wro8ESYh3Yg51DTK+EGq+q2ScPzH/+kuzM3BRZLvKqs0Z5knKy+mgccXsH6
QL8p2I4DwgnoPc7PjjmyQfLybrtZ81X+PVJWPf4jftF6ohh8AwLdImDFn73HjGOo
FBF6lnVxKXJM/MZHMAPPGpPEllbJWz9nq7Yt/C4KhtzZos/9k3O+X4jv6tw2e+co
mabNHN8KkmNqPwFKgy8vmcaUNQQlkLrN1Vwj73JPzdNG2trT4YtTVOdDp1Ye/YHb
sZgSA8lAnQ48LIzkUjsXrbBGmkQk9rB3kgaBn0jh/gqXJwbttAfsYeKbgiVHyfr1
zLsKvbQhZA+AKOX22jMWhUNL369mufF41HyiNUO3hZYf8J6GfXvf6IvK1K5CDmEU
AcB31gNfkrVWSJAzrHIXFWvD/IWxV3PcF2q7T4KLcB/bBmK2A3tlHJy/+SdjMGm3
Fs9fh7QjcZpUO2F2B5Wv5TK3kJw5NSTpBaolFFy2nFwFSNgJkMKxutTVg8Tazc4w
5LzjFDzB2RdaZy6+3GNd1i2POiMqNJzvp61tEUAX07plH5L72F3GFdS5VPspvNWR
aBs0V1FXkQEuOcO48GJgPUCA0fhsSH9lrTQtJIGku2KdW7eFvmA=
=2c4W
-----END PGP SIGNATURE-----
Merge tag 'bst-arm64-emmc-driver-dts-for-v7.2' of https://github.com/BlackSesame-SoC/linux into soc/dt
arm64: BST C1200 eMMC DTS for v7.2
Black Sesame Technologies:
Enable eMMC controller on BST C1200 CDCU1.0 board:
- Add mmc0 node in bstc1200.dtsi (DWCMSHC SDHCI controller)
- Add fixed clock definition and reserved SRAM bounce buffer
- Enable mmc0 with 8-bit bus on CDCU1.0 ADAS 4C2G board
The MMC driver was merged via mmc-next in v7.1-rc1.
this is the remaining DTS piece.
Signed-off-by: Gordon Ge <gordon.ge@bst.ai>
* tag 'bst-arm64-emmc-driver-dts-for-v7.2' of https://github.com/BlackSesame-SoC/linux:
arm64: dts: bst: enable eMMC controller in C1200
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
|
6191a61ec9 |
arm64: dts: bst: enable eMMC controller in C1200
Add mmc0 node for the DWCMSHC SDHCI controller with basic configuration (disabled by default) and fixed clock definition in bstc1200.dtsi. Enable mmc0 with board-specific configuration including 8-bit bus width and reserved SRAM bounce buffer on the CDCU1.0 ADAS 4C2G board. The bounce buffer in reserved SRAM addresses hardware constraints where the eMMC controller cannot access main system memory through SMMU due to a hardware bug, and all DRAM is located outside the 4GB boundary. Signed-off-by: Albert Yang <yangzh0906@thundersoft.com> Acked-by: Gordon Ge <gordon.ge@bst.ai> Signed-off-by: Gordon Ge <gordon.ge@bst.ai> |
||
|
|
564edaca14 |
Allwinner device tree changes for 7.2 - Take 2
Some changes for old chips and some for recent ones. - A83T gained the MIPI CSI-2 receiver - overlays enabled for Pine64 boards - D1s / T113 and H616 gained the high speed timer - T113s watchdog enabled (for reboot) - H616 gained proper SRAM regions - A523 family gained EL2 virtual timer interrupt and GPADC - A523 pinctrl IRQ fix -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEE2nN1m/hhnkhOWjtHOJpUIZwPJDAFAmoqvvMQHHdlbnNAa2Vy bmVsLm9yZwAKCRA4mlQhnA8kMNRXEADaQdsrBggjfKLOo6H42hdkrAFsuMwAzsFR hMVFMlFHYDzaC7Ac+ugCOV2ru2FqQffvOJD/1PlPGQTnQDPNO9m1O7a5G/77b9YM bxhr1/sHno0ZSoF71WaclIPjOlRY4EXnqCAuRqkpo1EsLPy/vv9ijFp9O28ml/p+ lWwFp4oNsH0WOzYOeSYMLt4huA95LIQH0Pba/+Gnm0OHEBYOyV/DUiya1LFJO/11 rWhOsNvbdcI9aPHS4meR8qG26QCEXTtcLA5q0zYtYFvANb2E0pXHf+d9vJ8g6UOz L/KSpmLYGkT0fb7O2FP4azEruYQEPhWptRE+Zc0dGMcyE0uHpdDBq0Al0U3HnyHV fa5FcuNVeVmiOnRagX6w5nkcYjM4Zf/DISPj5rJ8hIHFfH3cH+ePLkZfLIdEoWqy DYklr63MGl2BEMCYeXaix7zjd8KUlLvREWKpiPBonuS1ZnsEU1ij+uLQpZzPo40H GM56ESOHdsMRdyw56iNLZQ0Z0l2ihi89fzETRp3ozJDAdYLeuQN4kAtXgp/9SOHV t0aWaS5EclumXv1lJc8W+moMGeLSI5R86XY0jlJjnlVh5vC7JH7C5q+nK3VWuxox T372uc1jKzRbUANM+Qd8w2CNt7hJVTHJiGxxzmFBNna48gHoRwiD0+KnTT0fmV5y 5D35cL27Wg== =dm0Z -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmorI6EACgkQmmx57+YA GNk1eg/+ILPgWUY/Ld6G5ZJBF5izO4Hh57fblT0+Fy4SfTdXN203CCSFtCT37CqM +QuvAeVfu1pbiiqrH9CQ7vLBXx/k9QmKCYya2IAAHs8JVKTWrXFsLOt1FwQwr4KP 4vpDsBNjsfSlOE1IoI3wX5EbvzYgoiOCRKn23gBtavHWXWCifX7F6Ifh2yUpXK3j S6k1FEsszZt9TqxvXAi2Qkk/LSfVnxfXB/umngtipRjQiiJI5CqhMI/cdiMoqbGO +OUaWuwbx3z2EzqCwQ167pldn9pkLrB9j8bcXtJSoZwToAhNYJzZcFWpRP7uua49 zGf3gkVfMv28WiMxdXSetSAKFiiGHGNbgG9JeFcpA1da1C5PTMrGdzoc/tXKNV/P KCcbyB5AcPsycyHio3BPE4RX7HEqwOZdoR7Vj6sjgElo7eyoReAXzu1i+WO1s0gr UinzZWg2fk3J+D0sk/ttbubG909b5s8O1tHLyXHkiePpYhL02l2qhFmNPaLCzkyU MIok+Dq+zNoGE2KPfwcmnBHZt5nzGQAi/P/aPsBKsnsu+1VG876m6BKg/SocrKJU AKx5r0nUdTDKTpxAuynZdk3uYNYK2tYv0TfO6WCO7q30itGkDGicfxiIcMLcpcHz 5IpwvbpY/UP7+1N1iYcKyh0/RezSPo2ZHFjIPCdZbyAyvdLk36w= =ya9P -----END PGP SIGNATURE----- Merge tag 'sunxi-dt-for-7.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt Allwinner device tree changes for 7.2 - Take 2 Some changes for old chips and some for recent ones. - A83T gained the MIPI CSI-2 receiver - overlays enabled for Pine64 boards - D1s / T113 and H616 gained the high speed timer - T113s watchdog enabled (for reboot) - H616 gained proper SRAM regions - A523 family gained EL2 virtual timer interrupt and GPADC - A523 pinctrl IRQ fix * tag 'sunxi-dt-for-7.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: a523: Add missing GPIO interrupt arm64: dts: allwinner: a523: add gpadc node arm64: dts: allwinner: Add EL2 virtual timer interrupt ARM: dts: sun8i: a83t: Add MIPI CSI-2 controller node dt-bindings: media: sun6i-a31-isp: Add optional interconnect properties dt-bindings: media: sun6i-a31-csi: Add optional interconnect properties arm64: dts: allwinner: sun50i-a64: Enable DT overlays arm: dts: allwinner: t113s: enable watchdog for reboot arm64: dts: allwinner: h616: add hstimer node riscv: dts: allwinner: d1s-t113: add hstimer node arm64: dts: allwinner: sun50i-h616: Add SRAM nodes Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
74b1b75a32 |
i.MX DT Binding for 7.2
- Add compatible string for TI SN65LVDS93. -----BEGIN PGP SIGNATURE----- iQHFBAABCgAvFiEEJS45w2QNr0ezLVaoNF3oRQ23YkwFAmoqyTcRHGZyYW5rLmxp QG54cC5jb20ACgkQNF3oRQ23Ykzl/Qv8C7VG9NHQ2yTYWA7K0LGpwct6NKGiAgtu l6VhyCBLGbtaUcCbCH+lQzAozsGYtgULVXCgt+adM+bvItS6DzY1NItEz8fnrsQo om8RfQET1Vo9rPO+8V+J+xBnDko+E8pV6rqthamQTkehdAcCyl4B3JrzDICKDPbh Ygv0fb1Ip5qddbCtUh9NCISdBpounu4XVKQa8e11a9t/CWajtqXw9DJN9/22A1oP Hbd3uVCShDd34Xzc9TFDn0qE1oVuwIWHysEmp48mX+WvzoNC2HBTPPI0Dj3c74Ok z0ufnahIfuPxtwsMBELyy6wy/+pU4lQMfI91I7vwp/zXho0/gWNo6rqa5Oafaona B88PvwiC0Eh0cX64uI9poBQ1pq3y+iR2NLNTViPJA9hrsdWPqRWGN9GdosE47Ltj ZnH2fq4MMdS4kTEGE0MoT2Huf10H7KvvBx4+9ZObVXkM75pus9mTVVrT0IDOQRf3 2V6Exqke6xljM5vucYpL6HEA6dbeoOSF =gU5b -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmorIlEACgkQmmx57+YA GNnutw/+MOZjhxdj0pYDHvmkGV2OFQRLPZt+0ATpe2C5Nc+lW3qnHwF356GDXniZ ccs9oJS+93SCMqbbxu5wq1cg3WdBxU/tiAKP/eRjraN0E+Kspqy3PUN27kmZ0KPq SUUMZ01L8LiPY6AogW4pBaYuT8xdA1Wx3iw8dIZBs/VFTJrTEKwIQaoO8oUc1YsU rDaysja3a6ZwL+l38umY75g4fNhEJVM6BTQ9LrSIIuwpxw9KQv4bOostesRkUMIp 4qKdlhYuDAwa9m8zKvhhGWyYg8r+wLqTfUDZNvtR7mcuRbc3HnWZ2Tm3bwJ9CvAk GnA2Gd0H78QQbKJwN4SZ0DU2AQ0lQVDL32bvyRYFK/KfM/ygrD4Ce+ev0n0WY3YT a1vwh1el64jHkBgq5DxhPDPCGAU4CX6mSm//8ASYYIWsbHaOfb84JsXius6cPGgc JPF6EdsbNJ6+4Yd5IxQ111SbXvxxsTJmMmKeQfcIGXVvpsApl9/hG1FPQvU8dcKW JS9+GfFA07tlpIVq93zr4Nquzw4Wzww2Zx6LYtMq0uo9SRrtBSbZceUzXDCs+8pC 8jLUO8YrJg7oWnQ26QKk5k9jQEKXsB9mw36VZ1SqB3itTnwbLE1hx0V11WBe/dPY fsGlYSDzfSwu6Luu8PS0YnYby66MSB3ibIuz1M8FZWCA3ICIB98= =ewed -----END PGP SIGNATURE----- Merge tag 'imx-binding-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux into soc/dt i.MX DT Binding for 7.2 - Add compatible string for TI SN65LVDS93. * tag 'imx-binding-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux: dt-bindings: display/lvds-codec: add ti,sn65lvds93 Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
88c0120853 |
dt-bindings: display/lvds-codec: add ti,sn65lvds93
Add compatible string for TI SN65LVDS93. Similar to SN65LVDS83 but with an industrial temperature range. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> |
||
|
|
6b81aa0c8a |
arm64: dts: allwinner: a523: Add missing GPIO interrupt
Even though the Allwinner A523 SoC implements 10 GPIO banks, it has
actually registers for 11 IRQ banks, and even an interrupt assigned to
the first, non-implemented IRQ bank.
Add that first interrupt to the list of GPIO interrupts, to correct the
association between IRQs and GPIO banks.
This fixes GPIO IRQ operation on boards with A523 SoCs, as seen by
broken SD card detect functionality, for instance.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Fixes:
|
||
|
|
aecab2dd61 |
i.MX arm64 device tree changes for v7.2 (part2)
- Revert the 32-bit non-prefetchable PCIe window from 3 GiB back to 1 GiB to prevent overlap between inbound DMA address space and low system RAM. Such overlap can cause DMA transactions to be routed to a BAR on the same host bridge instead of system memory. -----BEGIN PGP SIGNATURE----- iQHFBAABCgAvFiEEJS45w2QNr0ezLVaoNF3oRQ23YkwFAmophNsRHGZyYW5rLmxp QG54cC5jb20ACgkQNF3oRQ23Ykwj6AwAxm7V1O/Vqmw996sUaIewHnSzd1yLG9vG rkExxhEDee1K/c/J/2yqAydwPMlXqDaFKGTQx3E/A0FlFj7/Jgz6uPLcDaLQ0TF2 wQ50YDJOncmbMfeaPq8eSbIUd54xQCSsm13hy193Nn3ueq9aKVIk8j+slwPQzfLb p+cCzq4fuLPQOVQYqa5pi+uuhQ1T2fOtJwqDUOzGwXCcjaEsIU024im+kVFKliDL p2Ovf0/8BOggKCRHJqNnWNUSSO38isbUVbqt2t3AV2jd7rSDrYkayFjy/C05npmI ud1GT2Rkln+jdvRCJFP+dOcHJOxjIaowM+el8DL0iUQEFn8MB5H5rj2w16XEm6k4 iOf2To1JCO8VedWTbO+jvN/wFDt6tzn6gYiYI3gBjZr+KJoO5vKOwXB7R7/jSQ3r wquT6YjUMUpqqf8FQMwf4RZFIj0DU5HCWCs6IoyGSvmMsyFylGecykwnIL6kxSwt dr8kaRLLBfRSP5ezcZZg/S0Bp22X2/SJ =MdQS -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmopzBgACgkQmmx57+YA GNkIRA//VNEscnKS+1lk0K5Q10NJdlWgcHrH+u4U5El0/39JtFm2EkLx3jlMzJoh BFuroWc+cZ3E0Ja+67gOwvJAaR72045fEL7JF9jpiBxOd3OXjFG3JzYyWPdV2Ae+ XcWBiC6S6z2jKJww5aZx31E6VOp9+A5NQBmhGNJQgcDoDfXk2kPhjUGhzgCjsm2U pUIrk6zaqyY6qONV663XTVTZr8X0g9R2ia4qqv5IuvqtDPnmfyR3H3HSzAKNvPEn h6rspvhIFxmKmkRS1dDxfFI9g4hIUQTJoIA8FzmGWNMZBoHJI8NDJEuatBF5PFVo xx1hOkgDpN0Vgm05tN3g/u63HeBryMF301f8WaqxVhXbDHthNrmyYNpfeJQIMjUs RfpJkn5Ha90mrb3/71632N6xvH6zyZWPGsa9Lnrnbbip1guSsqOH0Jc/bgNHdqwH 2hma7WvATysdZpqK8nkIvH6DqzlHy0A0vV3US97O+71OSCga3iYxQft2JP/Gi3P3 8SbbIosun+4dA2bLLbMmT3cwGljQpZ2rxji/TvP9jjv19IezFyn5o94H9fSrEbZP TQLaEdbwnL+iYSRtgSfP1XRuIBBw71HrSe7ZH2Fih6qVp6qaUJY+clQua+9Ztjx2 1Pgx/HZKTJI/i4LVpclQJR4UDBjcyQFz69vCM2LCT67+f0VnZoA= =YePn -----END PGP SIGNATURE----- Merge tag 'imx-dt64-7.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux into soc/dt i.MX arm64 device tree changes for v7.2 (part2) - Revert the 32-bit non-prefetchable PCIe window from 3 GiB back to 1 GiB to prevent overlap between inbound DMA address space and low system RAM. Such overlap can cause DMA transactions to be routed to a BAR on the same host bridge instead of system memory. * tag 'imx-dt64-7.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux: arm64: dts: lx2160a-rev2: avoid 32-bit pcie window system ram overlap Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
b8d5578e2e |
i.MX dt64 changes for v7.2
New Board Support:
Added 15+ new boards including i.MX95 (FRDM PRO, Aquila, Audio Board v2),
i.MX93/91 (Variscite DART/VAR-SOM), i.MX8 (TQMa8QM, SolidRun i.MX8DXL
HummingBoard), Toradex Verdin Zinnia variants, and LX2160A Half Twins.
PCIe Improvements:
Added Root Port nodes and PERST properties across
iMX8MM/MP/MQ/DXL/QM/QXP/95, new PCIe support for iMX94/943, common M.2
PCIe overlay, fixed outbound address space configuration
Graphics, Camera and Display:
Mali G310 GPU for iMX952, HDMI for iMX8MP PhyBoard, extensive DH
Electronics panel overlays, Extensive overlay ecosystem for DH
Electronics iMX8MP boards, PhyBoard PEB-AV-18, camera (OV5640), and
ethernet configuration overlays
Peripheral Support:
S32G2/G3 PIT/ADC/PWM, iMX8ULP CSI/ISI, iMX943 SD WiFi, USB hub for
LX2160A, TPM/CAN/ADC support for Variscite boards, Bluetooth and UART
enhancements for Toradex SMARC boards.
Enhancements
Added gpio-line-namesacross PhyBOARD platforms. Watchdog reset pinctrl
configurations for iMX91 boards, Ethernet PHY reset GPIO support.
Bug Fixes:
Corrected DDR PMU interrupts, SMMU registers, watchdog addresses,
interrupt flags, GPIO configurations, PHY reset handling, and RS485
polarity, USDHC signal configurations for PhyCORE SoMs.
-----BEGIN PGP SIGNATURE-----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=k15g
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=3iVk
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux into soc/dt
i.MX dt64 changes for v7.2
New Board Support:
Added 15+ new boards including i.MX95 (FRDM PRO, Aquila, Audio Board v2),
i.MX93/91 (Variscite DART/VAR-SOM), i.MX8 (TQMa8QM, SolidRun i.MX8DXL
HummingBoard), Toradex Verdin Zinnia variants, and LX2160A Half Twins.
PCIe Improvements:
Added Root Port nodes and PERST properties across
iMX8MM/MP/MQ/DXL/QM/QXP/95, new PCIe support for iMX94/943, common M.2
PCIe overlay, fixed outbound address space configuration
Graphics, Camera and Display:
Mali G310 GPU for iMX952, HDMI for iMX8MP PhyBoard, extensive DH
Electronics panel overlays, Extensive overlay ecosystem for DH
Electronics iMX8MP boards, PhyBoard PEB-AV-18, camera (OV5640), and
ethernet configuration overlays
Peripheral Support:
S32G2/G3 PIT/ADC/PWM, iMX8ULP CSI/ISI, iMX943 SD WiFi, USB hub for
LX2160A, TPM/CAN/ADC support for Variscite boards, Bluetooth and UART
enhancements for Toradex SMARC boards.
Enhancements
Added gpio-line-namesacross PhyBOARD platforms. Watchdog reset pinctrl
configurations for iMX91 boards, Ethernet PHY reset GPIO support.
Bug Fixes:
Corrected DDR PMU interrupts, SMMU registers, watchdog addresses,
interrupt flags, GPIO configurations, PHY reset handling, and RS485
polarity, USDHC signal configurations for PhyCORE SoMs.
* tag 'imx-dt64-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux: (110 commits)
arm64: dts: imx{91,93}-phyboard-segin: Add peb-av-18 overlays
arm64: dts: imx93-var-som-symphony: enable ADC
arm64: dts: imx93-var-som-symphony: enable TPM3 PWM
arm64: dts: imx93-var-som-symphony: keep RGB_SEL low
arm64: dts: imx93-var-som-symphony: enable UART7
arm64: dts: imx93-var-som-symphony: add TPM support
arm64: dts: imx91-var-som-symphony: fix RGB_SEL handling
arm64: dts: freescale: fsl-ls1028a-tqmls1028a-mbls1028a: switch mmc aliases
arm64: dts: imx943-evk-sdwifi: add a new dtso to support SDIW612 WiFi
arm64: dts: imx8mp-kontron: Fix GPIO for display power switch
arm64: dts: freescale: imx95-aquila: Add Clover carrier board
arm64: dts: freescale: add Aquila iMX95 support
dt-bindings: arm: fsl: add Aquila iMX95
arm64: dts: tqma8mpql-mba8mpxl: configure sai clock in audio codec as well
arm64: dts: freescale: add i.MX95 19x19 FRDM PRO board dts
dt-bindings: arm: fsl: Add i.MX95 19x19 FRDM PRO board
arm64: dts: s32g: add PWM support for s32g2 and s32g3
arm64: dts: s32g3: Fix SWT8 watchdog address
arm64: dts: imx95-var-dart-sonata: add CAN controller
arm64: dts: imx95-var-dart-sonata: add TPM reset GPIO
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
|
de8c602d5a |
arm64: dts: lx2160a-rev2: avoid 32-bit pcie window system ram overlap
A 3GB non-prefetchable PCIe bus window can overlap with inbound DMA addresses for low system RAM, so DMA transactions may be routed to a BAR on the same host bridge instead of memory. Change the 32-bit non-prefetchable PCIe window back from 3GB to 1GB on all controllers, avoiding that overlap while keeping the added 64-bit prefetchable region. This partially reverts commit |
||
|
|
2a185da3ed |
Microchip ARM64 device tree updates for v7.2
This update includes: - the device tree node for the OTP controller on LAN9691 SoC -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCaifBrwAKCRCejrg/N2X7 /TUtAQD16lsXFlJHNeSprOL2PNfuQDbxhM5RvBO4hKUccPHl3gEA2of3umDZ6Ar1 cgYFwvV6RaXnjOqXfxoumegbMaUvfAE= =Wn6w -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmooQ3MACgkQmmx57+YA GNnunA//aQvtBb6IlZ0xbqxPwt/fwU+iSzBc4i6VizSC8HSGaXwuuqFFzGjqDJ7g tjv1F5iEMuY8pVcfh8oedyviP/pNqxqXY5SPTd0kHgm4BDXMbCLE+35mn2RdsCpy JfADP0O0YePgTFYFYGrcDtqfkZYYcKqdbUEvzPFsBwjREz+mRFjiJAzNFZGE8cca y27ymYdnKrOGXgVftUKTDTY1E0PCb9wMuC+SPmTBZcSXSk48A3ProqVeSGgq1EbD ibboPq9eZPeW47nMkMEshNN8Dd/FbNLf9cammIt8iLDz0dH4YtQ1t7O5qzGc00vb HTnNigdol7AnFwFVhgMuiUyb8znMEdD0wVVf9bltdGW90pv/+sNBqe+B6o/aCYxL vsx7rKNC6mI9epgw3OhhpiLEGoN/0xuhGOHDPizlRbt9XWWuo33CsiCTB2k21A1r Y9BJNHTK0ZKszNvfsVxiIiH19YOjSR9yMV3yLgtad06pqm5p1q+kuU4CCoMK25yL Bl+6kiIV728wDWK+BAcvINyj3MkilTQmwLzznShLTU9kXotCwZvhx80O5lm+b3Jt reYF2h53PPsut7dLfBeo84sOOqcXjFqAPYQ4DS0Gmvynowsc5fQk3Ry+y1ez3s2R Vcz1kUIeJBthw2gV3AkW0AJaZnCJONUV0zpNZjQRbcyAhbUcr9k= =+dR/ -----END PGP SIGNATURE----- Merge tag 'microchip-dt64-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt Microchip ARM64 device tree updates for v7.2 This update includes: - the device tree node for the OTP controller on LAN9691 SoC * tag 'microchip-dt64-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: arm64: dts: microchip: lan969x: add OTP node Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
cb78caa297 |
Microchip AT91 device tree updates for v7.2
This update includes: - I3C controller device tree node for SAMA7D65 SoC -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCaiVgDwAKCRCejrg/N2X7 /ZrCAP9drPJxqUau9dfEyTsHDm5YR8GNtni5CKOsVJAUn5yhIQEAyXWBtJ9MBoTs HBvAATpP2gc3bEA2ehUzxJhwcQ3lMgw= =Tw+y -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmooQzwACgkQmmx57+YA GNkEuA//XxRbNpAPOttqt1+AkaFWRcFjMdljHE03xA6wMJscFXbOcdNhqVYRETZJ NtwqNeXrK7XKKgnhq09PyZK+4TWJz11SlW9TAFgvQWLBcW3DFA3WRtz99//3XCdT Kuwrv9m0aOaA2ouMzcvr/9VlKlJg1my4tXrH77RNiq2EtpJ98MH/fI1ThIfEGBQb QtCcfMZ+SFPEi/A0FUuEPbKY3+mn2Qx86v6ECxoP4CYStpjIguz85Qay/T7EziRp LUo/ULltAnTtVrR0XbGynTx6suWBzPDfIQMulCzz0tn7ih1ItJ4IVwbG59b42s+2 CyEzH/TG1ccLh/Q3W4b+qUtVSbGkYxQHvGHu6kzs2MZYQSaGDiP++WZN0GTurwDs 3w67tu+9QNpQ9RQQupPOJ72tHdnjHjNkATw/D3XIh/u6ssWkXSDX0GiEbIQRwXh+ +LvlAYg9zdEp95Gu3OtnFlG4eOZNlL//NCDoSOSjFabfFwUFn0O1ClZohVUgIJ4v /lDXx3DZ7uixrxVH9RWPcLgPEZBFHC2hU7moqv+BH6spkVIU038aohsIgFPm437Q JwgbDUQuMgH1qZlrWFKv6417P3vzo7uwUx8kFQFIV1YIzzQavcljFoSPwljzq0l6 vS7ZBI5Ets1AWFXWawfEvMRSdfH3IKBx7xtwC6wjfDAt/GOq2p4= =yYhi -----END PGP SIGNATURE----- Merge tag 'at91-dt-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt Microchip AT91 device tree updates for v7.2 This update includes: - I3C controller device tree node for SAMA7D65 SoC * tag 'at91-dt-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: microchip: add I3C controller Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
2ab5179ebb |
ARM: dts: OMAP updates for v7.2
Minor DTS fixes & updates -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAmom3ToACgkQWTcYmtP7 xmWZXQ/+M6ckBiWT69LZeOwPi4vdW1YfecmRS8IrtDfU9VQyKflpOHFyqQlIM7Qh RH5a+3ScYhBTuMVHlrGQBmQqLvPiV6/MffaWjjqB9PPRrHQgUDuI93/uxxRbNhPh +Jw/kzPxg1j8hV1UnPouN3/yrrPLIdCOtxDFLejavsek/OAhYAGltInR22rgQEp0 JT8H6I6CQs7M/mOu0RrZs6QpYWQTOVlEgyPadZGCEs6OQxweMQ6pQEA54AOmGJhg nqQPtKPT2LdNnGK8sgIZI0MX7UMJx0CQsThFOFSRQ3lCPB384so5JpD0vmFB1kBw PElG7O0bvtZoLMPet0xfYXJmdluwnZpr3MWhr+2SN8HqhyuSwljF58QmiwG9JW6s IRGTaFSqgTIyO+Qli3srae+zhZDTzOGuuQsKXEHTuUsjZ50NeCF9VkZ/8Uv9mg8w nOpfWEUCuc5ZhakGsMsTSDlfaWf9K71dksbmcFZ22rYHLKCPkZbkXA7S92v7lZJ2 7H9QYLnwDTUWVH794PZCoLMM/Ml9Uk68nHA0nUq/vA6xrnt9Z1xU4A5RsvrLl5vX 2Sk1monGG0AQwGPgXXjopxtl8Im8yTtMd69OvZoDz1ndiYAULuH9HX/HbL0M7Mqt q5lnW38RMar7f7uwPqtb09cQTZuIuDYH6BPplt7v0gMSk4+V79s= =3oNk -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIyBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmooQrwACgkQmmx57+YA GNls6Q/2OuuwoOyOY6rmf+2epQbH4NBLRH3MP+ZmtIVRTOYPWGnyXudWvL3E8IH1 kAc5rKdMJGyO4SIHBhQ6g4GZ6dv176QhWFVbkod/QFlEYaKvJh+siJHpYIUhp61D yO9MHcwYgJ171rq+z7dGgbbR9JfA6WyW3K6nMxcfbuxkq9l66VloqSKC/s2Ma3ne kEnqemVPQl/3QiMEKdo8fUw1ztHwAXcNmhNc79N9U01LsA7TVVh5LJZtVgupVzsI wBwBtmGgBekOkpd4kCUsHkjg2jocJ6s8USCWzYV2W74OUB4Fv2TjY09dFj/7Mc9o JxtwbXgOOfnGYldS6gzfpqGuVuh9Me5wfqUItoXLE4rE+p7YOxYI1pr708ujgoTb 0Q0pO3Fwwy21hSJ3TEFOa8b58hpbgH2+axow4nqtPc6KwDebjNh4F+gAaph0dyiT IAG4mearoyK6viBn0a3vsEmRMYC7xq4tPj9WUnQlYZ95qWkxyZiYp2a959rK6ac9 meRLOYXgGfZ2rIkMS96/69RSvMUZnusCLDAaT5MFXCPlfDs74Nl7f1UzpRfPzZom CjHPGHzSVRKr6WEx+OXCfW6np0IiDvnEfBWqjcs8/l/b8l7C1t/WM4wBbDuJD7Gy M94xxdOuBzWUGFvo5BAtMEG5g6fzMwQbvg62a2zpncr13J2Jhw== =hhYD -----END PGP SIGNATURE----- Merge tag 'omap-for-v7.2/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/dt ARM: dts: OMAP updates for v7.2 Minor DTS fixes & updates * tag 'omap-for-v7.2/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap: ARM: dts: dm8168-evm: Set stdout-path to uart3 arch: arm: dts: cpcap-mapphone: Add audio-codec jack detection interrupts arch: arm: dts: cpcap-mapphone: Set VAUDIO regulator always-on ARM: dts: ti/omap: omap4-epson-embt2ws: fix typo in iio device property ARM: dts: am335x-sl50: Fix audio bitclock and frame master endpoint Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
e77bb5dc57
|
arm64: dts: aspeed: Add initial AST27xx SoC device tree
Add initial device tree support for the ASPEED AST27xx family, the 8th-generation Baseboard Management Controller (BMC) SoCs. AST27xx SOC Family - https://www.aspeedtech.com/server_ast2700/ - https://www.aspeedtech.com/server_ast2720/ - https://www.aspeedtech.com/server_ast2750/ The AST27xx features a dual-SoC architecture consisting of two dies, referred to as SoC0 and SoC1 - interconnected through an internal proprietary bus. Both SoCs share the same address decoding scheme, while each maintains independent clock and reset domains. - SoC0 (CPU die): contains a quad-core Cortex-A35 cluster and two Cortex-M4 cores, along with high-speed peripherals. - SoC1 (I/O die): includes the BootMCU (responsible for system boot) and its own clock/reset domains low-speed peripherals. The device tree describes the SoC0 and SoC1 domains and their peripheral layouts. Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com> Link: https://lore.kernel.org/r/20260609-upstream_ast2700-v9-3-f631752f0cb1@aspeedtech.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
df6f379eb4
|
arm64: Kconfig: Add ASPEED SoC family Kconfig support
Add support for ASPEED SoC family like ast27XX 8th generation ASPEED BMCs. Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com> Link: https://lore.kernel.org/r/20260609-upstream_ast2700-v9-2-f631752f0cb1@aspeedtech.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
34efd73379
|
dt-bindings: arm: aspeed: Add AST2700 board compatible
Add device tree compatible string for AST2700 based boards
("aspeed,ast2700-evb" and "aspeed,ast2700") to the Aspeed SoC
board bindings. This allows proper schema validation and
enables support for AST2700 platforms.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20260609-upstream_ast2700-v9-1-f631752f0cb1@aspeedtech.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
|
1012d4d9f7 |
Microchip RISC-V devicetrees for v7.2
This time around, there's nothing other than patches for Microchip boards. All of this is low priority fixes and cleanup, centred on the pic64gx and beaglev-fire boards. There is no new support added. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCaiaVfAAKCRB4tDGHoIJi 0ukrAP9WOUMFZsIkVJvjMgrPoC+0km/Uy8WDj4efBgxW8Z7xvwD8D2uG9Revojwm 8PRjydw22KWI2DIxzxP3Gei7HMZLwQE= =1br7 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmooO9MACgkQmmx57+YA GNluoA/+IAZnT8Aa1dRag6H67qgERTFzyeU3uE48Vv/MHrhAuuRc8G22z4/i33Er 0z5mrb7PwGmC3OfrAkr3ATQDY9reYjADRe5jq3xA9Ip3e43uphBDcHN3qpDREDdX DaYOaWSwOkK80lWQ1nRE8OlztEIqqb2TamPZ7HYpuyMho8OHm0QZHQOMsSMzxlhX vYay2jSB/KwjcJWJdWANeyRarxnNY/g/V5lQT5YM4nt9vJ6W6/bRrR8O0wsHiGn8 daJ1ZljOKxEfhfQ12gbuzBKesz0aZ06aWPtuvsN/6HlkFWUwfxcsrJvbRR5zLKAZ QeKBnyWeN3xZe9ZiZN4rMgU6IxCChQbYsWB3yLei/NUTcB4YsM2NZXt7c3JBPIIj fqt7Pj9BCrSnvSFMS2bA43M7sNTfIA1DyNEgTo+Gp3D/4HFTz69vOBwSERS5PlfK JBXiw4/uVskQxbNwc9IhpEGo0Aa1Y+Vf9I+XbqFqvbGqNpaaw9LeFCCLjqHHRnjW l8YFxj7FO4u7BDt8LZ2NIUrQu0NTJHYSWNZe+ps4TpwkRrFMD/xODRP0QkFxd3Gy wLDAHN6MPBRLo3/zusoXHRe0xZK4f4C8SFXjVBB8K5pCYgZLgbxg/IprDgTLvU10 vLVjiDlkBlLa/AnT1QAGoAsmuE2kWy/NR6GPx4SVn1yc/vdUxxs= =syLy -----END PGP SIGNATURE----- Merge tag 'riscv-dt-for-v7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt Microchip RISC-V devicetrees for v7.2 This time around, there's nothing other than patches for Microchip boards. All of this is low priority fixes and cleanup, centred on the pic64gx and beaglev-fire boards. There is no new support added. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-dt-for-v7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: dts: microchip: remove redudant enabling of syscontroller riscv: dts: microchip: fix pic64gx gpio interrupt-cells riscv: dts: microchip: add gpio line names on beaglev-fire riscv: dts: microchip: add adc interrupt on beaglev-fire riscv: dts: microchip: clean up beaglev-fire regulator node names riscv: dts: microchip: remove gpio hogs from beaglev-fire riscv: dts: microchip: gpio controllers on mpfs need 2 interrupt cells riscv: dts: microchip: sort pic64gx i2c nodes alphanumerically riscv: dts: microchip: update pic64gx gpio interrupts to better match the SoC riscv: dts: microchip: add tsu clock to macb on pic64gx Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
a9219ea848 |
We've got basic camera support on RK3588!
New peripherals RK3588 vicap plus camera addition to some boards, RK3528 USB and USB enablement on some boards, RGA3 support on RK3588. Missing EL2 virtual timer interrupt added to RK3588. Some more added peripherals for the Khadas Edge 2L board. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmojShgQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgUA3B/90b5Ot4cK7ke1kX9SMzDtXjc5cNfsLA2wT 2CCwbZVPTxbmhZLd1OUU6v8A1ThY08TYMDVoph5ngxbnv2jjliWt1mPr76rkk+fk X2UCEkTCwpIXB1WCn4XU5q4WNUchDTf3Ggkbybuyfy5XZD77B90auTVUdFmJQOme zKpupUmXCf5xm1hcdgoXkC4mLb5DrRDCV5bQBbagQuimtR78tWmalJvj60IJJ6zx 4SZgMO5y87oLjgwecYEEElBGdO9kulzWsWqL1qXTk3Z/D2erE/fCEteFjWXRvGGS U/lz6a4BVPPqemEMz2aHK/8U2D+qZ30r4o0ENcCBT80RyCfJHQFT =k9Nv -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmooO28ACgkQmmx57+YA GNli+A/+K8bFV8M8569aTKmwXpBtfSjcYIK+/qBwkiDSVWlUyghUlq+Tx8hZZ203 J6ak+U8nH9zfeuL+5gLeQ9BaqRK1ns5CbIv9H0sZvHfp9wqaxvYKgeXF3Px36bSP tZlJmgLY6mBnfo7x2UokWYMClPHgF2dIVnvwAwe69UD4GXgElZL1FL+kFZZErwlH 9SS76nyVA2JnalqNsqQ+ZzTzMCB5uCrUlxde9b6GxjB9vjlvCNCPtlHRQh0tPDmt kBEZzXD6YF6OfGofHYFIaNTaU5iGwNGdFMzcVwPks7CMNgtrZxILW/qYbvD36Fud wILmAqNDyZhCHwjfmLj4F5sLYe6SAk9GMRjROy+IxVngRM1EhsU4IA+Db10THmcb FsVwO0d3/KP9xJUhmAMm0m77fi718UvgpBfrJpP0xkRzBindhHaghMJq9ueGiZq8 CkFL6hWYrPDx6QSATcVUvZfbitaT4uuC54sKytWI+j9H+J3RO3px6A7WiRXH3Txb r/v9uYF3XUxZlk8kAxLrF1TAI8y8mP682Ms2JPSBZyFz66QscmatwnW6G5jOfgiL 3hzGUGpy6e2bUQaXMQSO9Jx4oATngocwz79e0xsNMzv2wjhBhB7hVofhosBrd0Gr nCX1vJn9YmOjMeIkRzWoj7RUjFUqahE+WQyPLulMzix9DglzlDs= =qcRw -----END PGP SIGNATURE----- Merge tag 'v7.2-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt We've got basic camera support on RK3588! New peripherals RK3588 vicap plus camera addition to some boards, RK3528 USB and USB enablement on some boards, RGA3 support on RK3588. Missing EL2 virtual timer interrupt added to RK3588. Some more added peripherals for the Khadas Edge 2L board. * tag 'v7.2-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Fix vcc_sdio regulator max voltage on Pinebook Pro arm64: dts: rockchip: Enable USB 2.0 ports on NanoPi Zero2 arm64: dts: rockchip: Enable USB 2.0 ports on ArmSoM Sige1 arm64: dts: rockchip: Enable USB ports on Radxa ROCK 2A/2F arm64: dts: rockchip: Enable USB 2.0 ports on Radxa E20C arm64: dts: rockchip: Add USB nodes for RK3528 arm64: dts: rockchip: enable adc button for Radxa E25 arm64: dts: rockchip: Add Bluetooth support for Khadas Edge 2L arm64: dts: rockchip: Enable USB for Khadas Edge 2L arm64: dts: rockchip: Disable removed devices from rk3399-nanopi-r4s arm64: dts: rockchip: Fix EEPROM compatible on rk3399-nanopi-r4s-enterprise arm64: dts: rockchip: add radxa camera 4k on rock 5b+ cam1 arm64: dts: rockchip: add radxa camera 4k on rock 5b+ cam0 arm64: dts: rockchip: add vicap node to rk3588 arm64: dts: rockchip: Add EL2 virtual timer interrupt arm64: dts: rockchip: add rga3 dt nodes to rk3588 Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
0f6455d1cb |
ARM64: DT: HiSilicon ARM64 DT updates for v7.2
- Move role-switch endpoint into connector on hi3660-hikey960 -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEQeMYD8qOQTc1R/snC8hXbtmJZlwFAmoifxsVHHh1d2VpNUBo aXNpbGljb24uY29tAAoJEAvIV27ZiWZc0icP/i08TxerLmQCh018cLGVwoVhh+XP guGSSMSy/9SSk3i6Fe2AXYwLc7evyXbK5k0aoXyciM40v/p3qwV6OFkyQret5/2O 2MDDRIQvwtkMqatP21gNJjAkd8OUtNjpJsB+TNjHBFGfIwMviLLWuUOo/U2n034b dKyZQeg6/ydMCFfdQ3udiof/LzSuA4Cy5htfYZg6njBRLb+wEKey6d2SDDgsyy+N cFFivrLaJ03XsJgoxl13PJhNpL1PPpELfXSYgdMbwswRYp7L7gMS/J0gVHmE12cH +RDtqTxt0oktw4CdtNUFm2zuseM+VnG3CwI1eQAeCvu8iFJHAN2vWVWL5KaaIPuS DdBujDgWyNxUNOxiIMIdvSHau30CFUSY1UchwkmyXXXVibh/JwrAUimTgLSs91B4 hgyTgnlMhDMQwNEIFDacEoJs+yko63psvIa04OcDRC4qgeqN8Qw0ehXyikiEIhI7 Nd7MlGU4sDFnjQI/JYk4881yoh4bTSIMUbVoFMXC6cKI9Mp7nWy4mqAURTVKJWM6 twBD5Sz6R8Z54jxlGOMOitAfZb8KROjJ1dyUKVavRGtMzI/kH0ee62NEth1Z7Cw1 OhOXIEvcj0OWJcjQfpJcwqzzSuxAOStzCcmfTVkOiSj+JCjIiBZXta5siqi9Ks/L i1L+/13PC6pys5kG =FHQm -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmooOPAACgkQmmx57+YA GNlUxxAAkppuYtYJRbCaUHqyLnYkl5X970XLeWtk5orpI90PuzEyE4f96DWWQhqK pY7cwY48DRRJ/ck9+yzEu/t/NMobpEvmhusipuRtF2O8rkSVWAeZ3jE6jMaVyMS8 PQuxL3V3ky4kQWPPylLcTAiTJVB0OdKZabty265fyt6K2SBjFMkY0VdRf8iCTLC3 P0mPcFa0tS7Hbz6JnnxPSPxBN74YGKAfpM0Gbiqyx9cd7nYuOZsEKbiNQY8utFIz 1SeQvzk+ViEwCNLrLDe6UdyAzGi6WkVl8vO5ygAwUz8uXvaFn9hsu+oqcZMLgzJa dQ/KHMpUGs6bj9LV58bZIuDc2QQRf6bBvapB6PRx6xaMprwC/xq9PsYIxHpLqzMc /vKxR9zA/6ujdUo1NIwQ+53bkiNoHKkt7gMk94VLutrcbVmlfzU6e7G4DSt4lZmo xaCfaW3aXmuXr5wQ4HLYL87AERJKY1mCiD+xTs+dQZjJaY9ElBguhx3IFdMZo/b7 I+5EwYiw95wG7GkDAOm6N+aB1T26eV9MxMVdPYvcLQa0AjNFrhEdmbWOYqmYh7gd HH+it/521QLhUwkGffR7ZRd8Glt5lvGQ1DSJnTIXYlHpm1fqKZQrXTJZHJWWzQnL 6tjjoAQepwudOKfMjm9ne/mjTmy+D0SD8Lf5YUtlpwuln8Me0Ac= =X4sI -----END PGP SIGNATURE----- Merge tag 'hisi-arm64-dt-for-7.2' of https://github.com/hisilicon/linux-hisi into soc/dt ARM64: DT: HiSilicon ARM64 DT updates for v7.2 - Move role-switch endpoint into connector on hi3660-hikey960 * tag 'hisi-arm64-dt-for-7.2' of https://github.com/hisilicon/linux-hisi: arm64: dts: hisilicon: hi3660-hikey960: move role-switch endpoint into connector Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
1c00051aa2 |
i.MX ARM device tree changes for 7.2:
DT Binding Cleanup: - Replaced undocumented compatible strings with proper ones: * edt,edt-ft5x06 -> edt,edt-ft5206 * marvell,88E1510 -> ethernet-phy-ieee802.3-c22 * karo,imx6qdl-tx6-sgtl5000 -> simple-audio-card - Fixed incorrect VAR-SOM-MX6UL references (corrected to VAR-SOM-MX6) - Added missing required properties: * #phy-cells for usb-nop-xceiv * #io-channel-cells to ADC nodes * bus-type for ov5642/ov5640 cameras * ti,deskew = <0> for ti,tfp410 - Added missing supply properties (power-supply, vdd-supply, dvdd-supply, avdd-supply) - Removed redundant/empty properties (bus-width for video-mux, empty clock-names) - Fixed boolean property warnings and non-existent property references - Converted TS-4800 watchdog to DT schema - Renamed wdt nodes to watchdog for consistency New Features Added: - PCIe Root Port nodes and PERST property for imx6qdl, imx6sx, and imx7d - OV5645 camera support for imx7d-pico-pi - LVDS display panel support for imx6ul-var-som - WiFi and Bluetooth support for VAR-SOM boards - nvmem-layout support for imx7 - New bus bindings: fsl,aipi-bus and fsl,emi-bus - New board binding: variscite,var-som-imx6ull Code Refactoring: - VAR-SOM-MX6UL/ULL: factored out common parts for CPU variants - Separated audio, ethernet (ENET1/ENET2), and SD card support into reusable components -----BEGIN PGP SIGNATURE----- iQHFBAABCgAvFiEEJS45w2QNr0ezLVaoNF3oRQ23YkwFAmohrsYRHGZyYW5rLmxp QG54cC5jb20ACgkQNF3oRQ23YkzBuwv/WKlLxwHxUxt8Uc5QbZUb7QPBnaxTy+8U MaqSFG167KqiApMpWtkp+GDEoEHL59mUR673j8R6m679GMc1OqcZy2WxbzPP8LwM DegTZd7d0kssckxCy5QH83NtJVww0bocys4KdFjIB6BBLESWOA4SgxZOv2cUCdwW lLvlJyhI2c/VpbT1t8NP4EH7zHtExoB8ls8aTfHUTE2oFIGF5Y+qodn4xiyZ3fV0 V7kRDZbq4gXw+mhy6D0eeQ7oc4E612ql7lJbI3uZELRzuT5NH1usYTEl2E4oiie3 3/7QlXp4iSyhHvFUqVUssMAIxpTqmfErplbzrh+EBi/8qEr8SDXfrNJyGjaaN520 /1Sj0b0qkIouqEeYliv/5Jk0MpnhUzWuKXFYer8PqP3drRITZUWZnDXSYp/uQAL7 IjOi6xuTcU2XHCtd1Y9e1+V32P3mFrv9sc/CT3rkJjccxmbkdXUcL/QQoKucrnI1 PRbL83kqSu2ipc8kv4epokHOJRltE4Pq =lNRO -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmooOJMACgkQmmx57+YA GNnX/RAAoZrjV4u2RLy1aBssCy1SoTonJin+mvBwMdCIDWq0gI2lTEuOOSwQ1o7h t+mgvXlixmH8f8pcLqxpx671L3Ul0DBCkBBQba9RdnoHc8xmSxGQdWwUcCFPqshN 85Ly2QoUr7r2g4/Cb1krRTzLql3BZ7LgBXIQZjHDhp8FrRejEyTX9YE8t5tDQ9R9 oZQexd9GP036LMm01Df17iU18os+a98J6kaPB/pt5P/tX/rAR5xPBrRIkc9y+6Nr EAAwNpQw8SJQj/MaVB2MNAX5pBSW7wOvNp6leAvujyqmxhP3DLbWhHLaZK84A09j mUuY1auouLeuCcdJpXsw3AObffxUyeubSwoMJBoWNYjlLQQwQ8zAI9b7j7rK84L3 ESJnGHvOthK18SHGEsk+cPnrc+nr1nE73lgkzu/zCKPwW1kJgyt5eUTR4DKrKh0M 7QTxtn0XnQrQWPchKopAAjZs6tIM9JcqOOMmXl+kxuRNK+qL3ix6UNLfQqnEELI2 eiGefnEh22qPkTGXFv2LMcBPZxyaaYG5nnKLk5Ul0evuHg70Qr6NfjUfOmP39G68 aNSPQO0YSdkG8neOIqukDpmN2b26qUZz8OH/YpU1mzaKK2SFzcZnMdPkXh45q5ob nfFvRspn39d6B3KiXDgUXMYzPAxGej2nJBN2i+nmdfsd1Tx8Ejo= =FNvR -----END PGP SIGNATURE----- Merge tag 'imx-dt-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux into soc/dt i.MX ARM device tree changes for 7.2: DT Binding Cleanup: - Replaced undocumented compatible strings with proper ones: * edt,edt-ft5x06 -> edt,edt-ft5206 * marvell,88E1510 -> ethernet-phy-ieee802.3-c22 * karo,imx6qdl-tx6-sgtl5000 -> simple-audio-card - Fixed incorrect VAR-SOM-MX6UL references (corrected to VAR-SOM-MX6) - Added missing required properties: * #phy-cells for usb-nop-xceiv * #io-channel-cells to ADC nodes * bus-type for ov5642/ov5640 cameras * ti,deskew = <0> for ti,tfp410 - Added missing supply properties (power-supply, vdd-supply, dvdd-supply, avdd-supply) - Removed redundant/empty properties (bus-width for video-mux, empty clock-names) - Fixed boolean property warnings and non-existent property references - Converted TS-4800 watchdog to DT schema - Renamed wdt nodes to watchdog for consistency New Features Added: - PCIe Root Port nodes and PERST property for imx6qdl, imx6sx, and imx7d - OV5645 camera support for imx7d-pico-pi - LVDS display panel support for imx6ul-var-som - WiFi and Bluetooth support for VAR-SOM boards - nvmem-layout support for imx7 - New bus bindings: fsl,aipi-bus and fsl,emi-bus - New board binding: variscite,var-som-imx6ull Code Refactoring: - VAR-SOM-MX6UL/ULL: factored out common parts for CPU variants - Separated audio, ethernet (ENET1/ENET2), and SD card support into reusable components * tag 'imx-dt-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux: (35 commits) dt-bindings: soc: imx: Add fsl,aipi-bus and fsl,emi-bus ARM: dts: freescale: add bootph-all to i.MX7ULP watchdog nodes ARM: dts: imx7: add nvmem-layout ARM: dts: imx7d-pico-pi: add OV5645 camera support ARM: dts: imx6-display5: replace marvell,88E1510 with ethernet-phy-ieee802.3-c22 ARM: dts: imx: replace undocumented compatible string edt,edt-ft5x06 with edt,edt-ft5206 ARM: dts: imx6qdl-tx6: remove undocumented karo,imx6qdl-tx6-sgtl5000 and keep only simple-audio-card ARM: dts: imx: Add bus-type for ov5642/ov5640 ARM: dts: imx: remove redundant bus-width for video-mux ARM: dts: imx: add (power|vdd)-supply for related node ARM: dts: imx53-ppd: add '#phy-cells' for usb-nop-xceiv ARM: dts: imx53-qsb: add dvdd and avdd supply for panel sii,43wvf1g ARM: dts: imx: add ti,deskew = <0> for ti,tfp410 ARM: dts: imx7d: Add Root Port node and PERST property ARM: dts: imx6sx: Add Root Port node and PERST property ARM: dts: imx6qdl: Add Root Port node and PERST property ARM: dts: nxp: imx51-ts4800: Rename wdt node to watchdog dt-bindings: watchdog: Convert TS-4800 to DT schema ARM: dts: imx6ul: add #io-channel-cells to ADC ARM: dts: imx25: remove empty clock-names for nand-controller@bb000000 ... Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
b55ed73106 |
Apple SoC DT update for 7.2
Add minimal device trees for all t8122 / base M3 based devices and some required new compatibles to the dt-bindings. These are enough to boot Linux on these devices to a simple serial console but future work is required to make these machines useful for end users. Signed-off-by: Sven Peter <sven@kernel.org> -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQS3vz815OHsEaWy0u9EEX0kKnUe6QUCaiFSMAAKCRBEEX0kKnUe 6ULzAQDG1d3BZ6IKYZRZkCNuQUecKZY/NA/6TdzU1I8eQ3nW7gEAsYeh/OSPD5/+ ZehIZZ7sIqowWzcmGAAXNDJvZBJKCw8= =mqxb -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmooOGQACgkQmmx57+YA GNnHnxAAvKzB3bciQatigK6ggr53jjWm3XKzWlzE9ICGWiQk7uNcXQ3xsVVekOcg vAR1pEoVbi1ofNvptdiEIOvUULCB/0s/6aso7lqhMLC2M+CRCKPnvIOQvAh91pdJ ZvuHlptrK3guFLunGiDjWrahjwY7oLs0DOBXsLJq9BIsHJKtAlNzSMAIVJJAMd23 sVm6lq/kfFEa46YFLQYkZAKaW/DrhxFLQR092qMvoquFZwMxKm5y9ajt0h5LXLPb jPKRarCK0BJ+NwyRkIRHM2bYQxQrmBEhlJ/XetDtuA6o6fJce1rDZS2i3IywDVzP tvt8UPticpO6J5YbF1YHG2iMQkqPnquYl28RaPq8PPjWoJJ57phfhiffJZ7ZSusH mOis0++87Fe9uVKcvBiTCfjZibbFOAVgU5yu2M+GrSs6rl+OnbUqGOY7QNnMmDER autZuhuWNbTnNIuXa7s4j8GlS6YNoHIvlkTF20v2ABJeJc9zcaMJwgQOVNDShqhu HKml8AgdPIylSSHInZ9nkGjjfmUczTxtCMA3Pkp2Qi+SF41ry9dJP0oncX3kWSdV rRYAMDe5VQSI7aHKxHUuFxii6FG4mdEWeDjvjw/LGELenp52gSC5SCDY3/mycGop S+XMKxN6EO9+p8SrYBpmFVVJskSWIP+d5P+R4RVmfNZiHDA6h+s= =thB1 -----END PGP SIGNATURE----- Merge tag 'apple-soc-dt-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux into soc/dt Apple SoC DT update for 7.2 Add minimal device trees for all t8122 / base M3 based devices and some required new compatibles to the dt-bindings. These are enough to boot Linux on these devices to a simple serial console but future work is required to make these machines useful for end users. Signed-off-by: Sven Peter <sven@kernel.org> * tag 'apple-soc-dt-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux: arm64: dts: apple: Initial t8122 (M3) device trees dt-bindings: arm: apple: Add M3 based devices dt-bindings: pwm: apple,s5l-fpwm: Add t8122 compatible dt-bindings: power: apple,pmgr-pwrstate: Add t8122 compatible dt-bindings: arm: apple: apple,pmgr: Add t8122 compatible Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
018450d76e |
TI K3 device tree updates for v7.2
SoC Specific Features and Fixes: J722S: - Use ti,j7200-padconf compatible for pad configuration - Add MCU and wakeup domain peripherals specific to J722S - Use J722S-specific compatibles for WIZ, gmii-sel and CPSW3G nodes Board Specific Features and Fixes: AM62x (Toradex Verdin): - Add display overlays: DSI-to-HDMI adapter, DSI-to-LVDS adapter with 10.1" panel, capacitive touch displays in 7" DSI, 10.1" DSI and 10.1" LVDS configurations, and Mezzanine with 10.1" LVDS display - Add NAU8822 Bridge Tied Load audio support - Add OV5640 CSI camera overlays - Add Verdin Mezzanine CAN overlay - Reserve UART_4 for Cortex-M4F use AM625: - Add support for TQ-Systems TQMa62xx SoM and MBa62xx carrier board, including new dt-bindings compatible strings AM62x (phyBOARD-Lyra): - Add DT overlay for Lincoln LCD185-101CT OLDI panel AM62-LP SK: - Add system-power-controller node AM62A7 SK: - Add bootph-all tag to vqmmc regulator for proper boot sequencing J721S2-som: - Add bootph-pre-ram property to PMIC-B for proper early boot sequencing -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE+KKGk1TrgjIXoxo03bWEnRc2JJ0FAmogR3cACgkQ3bWEnRc2 JJ2uxg/8Cq1I66AnGNcIcGd3HeRRrD38Wh3BYdY1lboi8sl4c1LRnaztSMPAt629 m+W3c7GOi22PPpNxJX0xRnB3FHARp5M0804Hg1fW5fxE0V/YcC+9nVmpAlSoyjO1 qifUYVbtRLFDCvG+a7KRQDUAU2Q8RY9/Es+pVyvaJ6d2++xOcRGbONVh/kF24l56 QJV96ew0zDtio3gZO07MspoihEMnTTdsQYiER1kPBF0Al3OxLhF9787u4WSUJd0x 2F5mKw2UXW3xQ0i2+dmw8y81DmLIV6yyzaga/mUiC8k7DE0lxNAKAABlweidAEmd o8JJ2MxjN6fWyiIY10KTo/WFdkJx1a6itMxThDLKDt8Lj5Y0cvPPrDXGA5DBSPB9 0/B6/SucM0UjHlZUOqpSFmrKSOmF6P/HqB+6YzUf7acfjMmgLqFiaicUpptruS1C NL8rJ8l71kHbJhUnUIlrqoP9ELIaWGIUlg0oz48b2H5jYyDf2IXAKUjEsGuAlFsX si3aZl0DMXOi8LWlBiMb9w8y6G3TKmHHGm+0ATVW3uP8XWaKdoHK0xZeVrGfsYPa 86+HC/4m58wFZCc+ga3Nk/uSbazWBzVCcreVHm49e622rVvTTknajLBPlbKsMN+b qY5AOR8DGG4NSPDP9KF1dJVBXI+E3u9taKJGhlKRxQSkZ7S5jx0= =NfiJ -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmooN9IACgkQmmx57+YA GNmmRxAAxAvU3Pe4QWXYIbTnrz6waKTXQgEiwiaknXbhi/uc2k4qIN8f4DPRcnXU mZENpVsSVxJpDB/IoqqWLobq9ZCLnMkWSBDVTtfodKJQKy6GyaCfGKeARFdssD73 ixVb4wWtEfiJRRhFqwlcrI1On42vw2bhUL9PBmv5tVK68Ehf/BIN41e6ev7x79+b 81htJlHZBCd+a3UCVQkG3i6HmMPho6M1/C/weiw3KOsay3yuAZmcLdxRjjcqvmTE Rmgvv4IamlzKmyfP7b/XcKIrQv88L1uKFbcSNKfUg0NDBvSGrFfplrwVllfQv8NW TcNwP9P3R+9sz5jxl6G76IMnCqFXE+tlJ8juP5S7mRv/DMuZG7pkIVneXFXMEZjB qhw7vLdZnFxmyHdQNTGLZDkIXX4YanlcDia1zyFw5yOv2VUuz1cXRNXPj1AdoVq0 jb23yvRfz44NwFL61f5chchX/tjlKqUHYPC7a9zLnFEczDoj05m6wXizU8KTSPxC Pm7yt0A2G5+OsdoFFrRauLRumbGz+7fOVpQr0RqI2GJNB/ypFuYa+fQcQNfD4jVb D+aHaxkWb+lq54bmP98fZSEGLYrIV3myMCJqz6Qz6c9KXQT6jPZlNHuNxxG4MB0Z MZ3QFGom+flQeqj8g+iW+xDtM0oUkRaf4TzOdXPIR3A7tgeaI6w= =6Kjh -----END PGP SIGNATURE----- Merge tag 'ti-k3-dt-for-v7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt TI K3 device tree updates for v7.2 SoC Specific Features and Fixes: J722S: - Use ti,j7200-padconf compatible for pad configuration - Add MCU and wakeup domain peripherals specific to J722S - Use J722S-specific compatibles for WIZ, gmii-sel and CPSW3G nodes Board Specific Features and Fixes: AM62x (Toradex Verdin): - Add display overlays: DSI-to-HDMI adapter, DSI-to-LVDS adapter with 10.1" panel, capacitive touch displays in 7" DSI, 10.1" DSI and 10.1" LVDS configurations, and Mezzanine with 10.1" LVDS display - Add NAU8822 Bridge Tied Load audio support - Add OV5640 CSI camera overlays - Add Verdin Mezzanine CAN overlay - Reserve UART_4 for Cortex-M4F use AM625: - Add support for TQ-Systems TQMa62xx SoM and MBa62xx carrier board, including new dt-bindings compatible strings AM62x (phyBOARD-Lyra): - Add DT overlay for Lincoln LCD185-101CT OLDI panel AM62-LP SK: - Add system-power-controller node AM62A7 SK: - Add bootph-all tag to vqmmc regulator for proper boot sequencing J721S2-som: - Add bootph-pre-ram property to PMIC-B for proper early boot sequencing * tag 'ti-k3-dt-for-v7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: arm64: dts: ti: k3-am62-verdin: Add Mezzanine with Toradex Display 10.1" LVDS arm64: dts: ti: k3-am62-verdin: Add Toradex Verdin Mezzanine CAN arm64: dts: ti: k3-am62-verdin: Add Toradex OV5640 CSI Cameras arm64: dts: ti: k3-am62-verdin: Reserve UART_4 for Cortex-M4F arm64: dts: ti: k3-am62-verdin: Add NAU8822 Bridge Tied Load arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 7" DSI arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 10.1" DSI arm64: dts: ti: k3-am62-verdin: Add Toradex Capacitive Touch Display 10.1" LVDS arm64: dts: ti: k3-am62-verdin: Add Toradex DSI to LVDS adapter with 10.1" display arm64: dts: ti: k3-j722s-main: use J722S compatibles for WIZ, gmii-sel and CPSW3G arm64: dts: ti: k3-am62-verdin: Add DSI to HDMI adapter overlay arm64: dts: ti: Add TQ-Systems TQMa62xx SoM and MBa62xx carrier board Device Trees dt-bindings: arm: ti: Add compatible for AM625-based TQMa62xx SOM family and carrier board arm64: dts: ti: am62-phyboard-lyra: Add DT overlay for Lincoln LCD185-101CT panel arm64: dts: ti: k3-j721s2-som-p0: add bootph-pre-ram property to PMIC-B arm64: dts: ti: k3-j722s: Add wakeup domain peripherals specific to J722S arm64: dts: ti: k3-j722s: Add mcu domain peripherals specific to J722S arm64: dts: ti: k3-j722s: Use ti,j7200-padconf compatible arm64: dts: ti: k3-am62-lp-sk: Add system-power-controller arm64: dts: ti: k3-am62a7-sk: Add bootph-all tag to vqmmc Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
c52ef0229b |
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 7.2, please pull the following: - Rosen moves the Meraki MX6X pinctrl configuration to the PWM node where it belongs, also fixes the USB3 GPIO for the R6300v2 and EA6500v2 routers - Jinseok fixes a gpio label for the bcm2711 systems (Raspberry Pi 4) -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmod6zkACgkQh9CWnEQH BwT8rA//fyt24BziBBI0p36ZyQtM09aALU1o0lw7/SvA1dNXLwVyZpGkYLuvQEhU 9cMPnvgk2zzcGkC0kEAb+URgZJm/jSC6q1XktV/Ah+mXFbydFzB6mZpnl36zJYSS 77ZHSNzXmGbFjJ1A9Z7PTj91P6OnrwS2qzTb4zfC+t+u/AU5fud7sId7KzPgiUHM pJFYhlPRdwpg1CwxRkXP1VK318bvDYD4BIs42nYZd1HE8Yzl/5DTePrteUAHRk57 oJkuKn3ZYi7pgboIUKypqO6VyHh5LD3qoZN8SbkWA9gZ/A61mkpR2dceg7zCTNFu CtFyxicfsNacOOkYkN4B+9OebE7KsNOgjuO6bDDZdb92PeoVDzMUr8DNkKlnuCE9 TmerTX06WLjEti/aKW4XmLhDKtGNSbbtdWNVMAPrJbLn5ctEdxDH5ILaHlvcrq8f Ya4JNZLDhG+JJqZSX65S9aYcinUb7BmUpoli5YbczG1yQbte6qHeHOjIuHGncDHc B030XEYD4SMAyPpJqKJze20QEK9lKaSgSPixZq5Pb9ZZuUBDc8zPUEV3+7hailpU Zm0jdffpTRP3bpIymefPuy2N6V3YxfZKRetW32JrLzcecCEr6KlqvVztFlUjjM7s nITgB/qfTkmVz8TsjYyLf2f7E60OJGai16gBSB/qzOUp9qJTatQ= =+Xv1 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmooN54ACgkQmmx57+YA GNlY7xAAnykFhBvTpvWvm+QnNIEz7FnTOZ5tJxHkzU3ra2BA5XENn2i9hr9bTaC3 pcvV9Uj7ciidA5W0vsr2+Mx6MDqRrbCNUMNYJmzQoSsJThCYCk3bEeYtwVJWgp2E iNt2SBdTtmRpmD/0OK/3u6y37NJTmoaBy2E/MpCl+5aWJnoUZso1I9BVE1CIXD5I Ztdf+OKYIG00eFl7l1qf0wxu7AhagW8tEUO2sy3mb++pga6nlsk4tyGOFF9zIhcr 6di/ifDDkjQCTO4YHcnmi1k7sAImD+46bSRd3gbgXCtaUYuPmDzwYzk1Z5fXHcJ3 f3FtWfzjKXCpV+FLrCoSNEiku0EO7wOnx9qfHs8ObUTIUCqFNrTGZ5NQvh+CKsct 3BCYccx73lTStTqk1fbtshDdzQG495xylTBc3T8Tjt2yM2SzWtMIkRb5lfL/1dh6 3NisDK3tSppnSKbnnLIsG0l1IdRm8Wwd8oR7TJjv3J37fxw1HeEBEWYSv2jVzNJl vLaontWV6b0Umn/737nb7nMXXYOf53zes7Qa57GP7jSuJ6JIOR0BC+orEc75LNxJ 5n8ZTQa5TcgEq30cfWzUhjphKoU/URafsT92m/t9msMG7MPpfBpR3M2W692mP93i 1dQ83VF+LotOLIpqcixLIAJyQbaYr2A0wXGk51n521CFnnscNM4= =iAvC -----END PGP SIGNATURE----- Merge tag 'arm-soc/for-7.2/devicetree' of https://github.com/Broadcom/stblinux into soc/dt This pull request contains Broadcom ARM-based SoCs Device Tree changes for 7.2, please pull the following: - Rosen moves the Meraki MX6X pinctrl configuration to the PWM node where it belongs, also fixes the USB3 GPIO for the R6300v2 and EA6500v2 routers - Jinseok fixes a gpio label for the bcm2711 systems (Raspberry Pi 4) * tag 'arm-soc/for-7.2/devicetree' of https://github.com/Broadcom/stblinux: arm: dts: bcm2711: Fix typo in gpio-line-names ARM: dts: BCM5301X: EA6500v2: fix USB3 ARM: dts: BCM5301X: R6300v2: fix USB3 ARM: dts: NSP: Move MX6X pinctrl config to PWM node Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
|
47be56c13c |
arm64: tegra: Changes for v7.2-rc1
This contains a fix for GPIO on Jetson AGX Thor and enables the PCIe
controllers used on this platform.
Smaug (a.k.a. Pixel C) devices can now be properly powered off via the
PMIC.
Miscellaneous improvements are made across a number of different boards,
such as SMMU enablement on Tegra194 platforms and some better bootloader
interoperation on Chromium-based devices.
Finally, various minor fixes to device tree properties round off this
set of changes.
-----BEGIN PGP SIGNATURE-----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=kj5P
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=VIOE
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-7.2-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Changes for v7.2-rc1
This contains a fix for GPIO on Jetson AGX Thor and enables the PCIe
controllers used on this platform.
Smaug (a.k.a. Pixel C) devices can now be properly powered off via the
PMIC.
Miscellaneous improvements are made across a number of different boards,
such as SMMU enablement on Tegra194 platforms and some better bootloader
interoperation on Chromium-based devices.
Finally, various minor fixes to device tree properties round off this
set of changes.
* tag 'tegra-for-7.2-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Enable SMMU on Tegra194 display controllers
Revert "arm64: tegra: Disable ISO SMMU for Tegra194"
arm64: tegra: Add #{address,size}-cells to Chromium-based /firmware
arm64: tegra: Fix aspm-l1-entry-delay-ns L1 latency cells
arm64: tegra: Mark MAX77620 as system power controller on Smaug
arm64: tegra: Enable PCIe for Jetson AGX Thor
arm64: tegra: Fix address of Tegra264 main GPIO controller
arm64: tegra: Add aspm-l1-entry-delay-ns to PCIe nodes
arm64: tegra: Fix Tegra234 MGBE PTP clock
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
|
e53b4d7b3e |
arm64: dts: allwinner: a523: add gpadc node
Describe GPADC block on Allwinner A523.
Tested on Radxa Cubie A5E:
- 2 connected channels are showing voltages in agreement with
schematics.
BOOT-SEL-ADC ~500mV
BOM-ADC ~1800mV
- 3rd channel exposed on 40pin header is showing correct voltages when
connected to known voltage source.
Signed-off-by: Michal Piekos <michal.piekos@mmpsystems.pl>
Link: https://patch.msgid.link/20260516-sunxi-a523-gpadc-v3-3-a3a04cff2620@mmpsystems.pl
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
|
||
|
|
a186a9742d |
arm64: dts: allwinner: Add EL2 virtual timer interrupt
The ARMv8.2 based CPUs used in the A523 SoC (and derivatives) are missing the EL2 virtual timer interrupt. Add it. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://patch.msgid.link/20260523140242.586031-6-maz@kernel.org Signed-off-by: Chen-Yu Tsai <wens@kernel.org> |
||
|
|
9e8019bd2f |
ARM: dts: sun8i: a83t: Add MIPI CSI-2 controller node
MIPI CSI-2 is supported on the A83T with a dedicated controller that covers both the protocol and D-PHY. It is connected to the only CSI receiver with a fwnode graph link. Note that the CSI receiver supports both this MIPI CSI-2 source and a parallel source. An empty port with a label for the MIPI CSI-2 sensor input is also defined for convenience. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://patch.msgid.link/20260518153339.619947-8-paulk@sys-base.io Signed-off-by: Chen-Yu Tsai <wens@kernel.org> |
||
|
|
64659ee650 |
dt-bindings: media: sun6i-a31-isp: Add optional interconnect properties
An interconnect can be attached to the sun6i-a31-isp device, which is useful to attach the dma memory offset. Add related properties. Signed-off-by: Paul Kocialkowski <paulk@sys-base.io> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20260518153339.619947-3-paulk@sys-base.io [wens@kernel.org: Corrected sun6i-a31-csi to sun6i-a31-isp in commit log] Signed-off-by: Chen-Yu Tsai <wens@kernel.org> |
||
|
|
7c2a29d72f |
dt-bindings: media: sun6i-a31-csi: Add optional interconnect properties
An interconnect can be attached to the sun6i-a31-csi device, which is useful to attach the dma memory offset. Add related properties. Signed-off-by: Paul Kocialkowski <paulk@sys-base.io> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20260518153339.619947-2-paulk@sys-base.io Signed-off-by: Chen-Yu Tsai <wens@kernel.org> |
||
|
|
08fec5b1d3 |
aspeed: First batch of ARM devicetree changes for v7.2
New platforms: - Rainiera6 (Meta) - SanMiguel (Meta) Updated platforms: - Anacapa: SGPIO line names and interrupt configuration - Clemente: Remove TMP421 nodes - Kommando: Enable networking via MAC2/MDIO2 - SanMiguel: Line names and interrupt configuration AST2600 SoC updates: - Describe PWM/Tach - Describe I3C controllers - Reorganise I2C nodes Other notes: |
||
|
|
9cf333de20 |
RISC-V Devicetrees for v7.2
Sophgo: For CV18xx serials: - Add bindings for Milk-V "Duo S" board. For SG2042: - The CPU unit address incorrectly used decimal numbers, especially for those nodes which value >= 10. Now corrected to use hexadecimal. - The MSI controller actually only supports 16 interrupts; corrected to match the actual situation. - PCIe RCs are cache-coherent with the CPU. Marked it out for RC nodes. For SG2044: - The same as SG2042, use hex for CPU unit address. In additional, update Chen Wang's email address for Sopgho SoC maintainer. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTYPcWJ6By3aFu8IuKHG95Quc97dgUCah/FnAAKCRCHG95Quc97 dhWzAQDU0rJDliEvffHvt4MBpMe5MuK5vgwxEun3YPCjCTzkpQEA6HT6IgHjlibB SLUn4X8cbJpupgI3czvkxogPNWeZYgE= =kAeE -----END PGP SIGNATURE----- Merge tag 'riscv-sophgo-dt-for-v7.2' of https://github.com/sophgo/linux into soc/dt RISC-V Devicetrees for v7.2 Sophgo: For CV18xx serials: - Add bindings for Milk-V "Duo S" board. For SG2042: - The CPU unit address incorrectly used decimal numbers, especially for those nodes which value >= 10. Now corrected to use hexadecimal. - The MSI controller actually only supports 16 interrupts; corrected to match the actual situation. - PCIe RCs are cache-coherent with the CPU. Marked it out for RC nodes. For SG2044: - The same as SG2042, use hex for CPU unit address. In additional, update Chen Wang's email address for Sopgho SoC maintainer. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * tag 'riscv-sophgo-dt-for-v7.2' of https://github.com/sophgo/linux: riscv: dts: sophgo: reduce SG2042 MSI count to 16 riscv: dts: sophgo: sg2042: use hex for CPU unit address riscv: dts: sophgo: sg2044: use hex for CPU unit address riscv: dts: sophgo: Add dma-coherent to SG2042 PCIe controllers dt-bindings: soc: sophgo: add sg2000 plic and clint documentation dt-bindings: soc: sophgo: add Milk-V Duo S board compatibles MAINTAINERS: update Chen Wang's email address Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> |
||
|
|
d1d7310e2b |
nuvoton: First batch of arm64 devicetree changes for v7.2
Just the one patch adding ethernet nodes for the MA35D1 development board. -----BEGIN PGP SIGNATURE----- iJIEABYKADoWIQSoUT1x3bOSX/nAa8ajM9GZTrjhpgUCah+JDxwcYW5kcmV3QGNv ZGVjb25zdHJ1Y3QuY29tLmF1AAoJEKMz0ZlOuOGmi5AA/1c36yXTxYoAmQWjYv5u l0sAc8TZfUoxQ33/4GvO0NUfAQCrgXgOrTTQ3RdYwb10rgF60nPwZALITRfllMZU ozixAw== =t4B5 -----END PGP SIGNATURE----- Merge tag 'nuvoton-7.2-devicetree-0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux into soc/dt nuvoton: First batch of arm64 devicetree changes for v7.2 Just the one patch adding ethernet nodes for the MA35D1 development board. * tag 'nuvoton-7.2-devicetree-0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux: arm64: dts: nuvoton: Add Ethernet nodes Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> |
||
|
|
a577cc3a46 |
Amlogic ARM64 DT for v7.2 v2 take 1:
- Khadas VIM4 (T7 SoC) features: - Memory layout fixup - GIC register range - Model name fixup - PWM, eMMC, SD card and SDIO support - PWM LED - I2C pinctrl node - Khadas VIM1s Features - Bluetooth - PWM LED - Power Key - Function Key via SARADC - RTC - Remote control keymap - Bluetooth node for Phicomm N1 -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmoei2YACgkQd9zb2sjI SdGsKw//V2+z5oF3MvOeKq3zGg+/eozh8vTcz/OSzUQmDSM8k+0XN2Iohue/m6FG 0QDaaUJj0gyiGU9jKI/c9FcI9+gsQ4yKEGJz9rcHnY8FCTBJ/YnP5DrkG3DVQJ3N 4H/bexBbIgyrF6upDZA8hia5ZMpLY8ps3geQSX9k19gymRC/WYCiZI/HOFVH0gAx 1/5oemCbSGInjm7ai6KdDhlgGlPuShlq18csj23EXqH0BGjQzxVBn+fP4U9BTOnZ +2meiuUNHSyLBieGGyZE2/O0U13B5WQy4IcCucdlc7M8zEH7FsDZm9jwSpOSKlL7 rQguW4Ezgi/EfUDoiSB5ScvStBGIyDqEUR1FP08WcnO0yRFouJdSiu/L6tn9KzIg uEdy8Vf+lsUZClsTAZU9RRNUEZkcKnWtahaN4AIKW+x3aye5qlaBTdGkTNcALMC6 vrVr5LY9a0jCvkWzTbFsqHgPS8eqE2go7Merc3GRP8JQNg4A7qS+a9HVc8wXX7jm vZrUl1We3uSCe4Q8zSbFfm4bLPkwXu41Im2/tSTe+72xFRGgL1OBsXVOGJ0ZJ89d QKycsiOEYrS3dCunqjkpqoKuf4065tf56aelbqrUznYau6pxKZeNmU8cVBKsefO+ C/gYVu/Us38+XrrA/iPEPAeWu/+Txw85PDb0cu/Rl9xkqQDXEZs= =8Trw -----END PGP SIGNATURE----- Merge tag 'amlogic-arm64-dt-for-v7.2-v2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt Amlogic ARM64 DT for v7.2 v2 take 1: - Khadas VIM4 (T7 SoC) features: - Memory layout fixup - GIC register range - Model name fixup - PWM, eMMC, SD card and SDIO support - PWM LED - I2C pinctrl node - Khadas VIM1s Features - Bluetooth - PWM LED - Power Key - Function Key via SARADC - RTC - Remote control keymap - Bluetooth node for Phicomm N1 * tag 'amlogic-arm64-dt-for-v7.2-v2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: (22 commits) arm64: dts: amlogic: t7: Add i2c pinctrl node arm64: dts: amlogic: t7: khadas-vim4: add PWM-driven status LED arm64: dts: amlogic: t7: khadas-vim4: reorder root node arm64: dts: amlogic: t7: Fix missing required reset property arm64: dts: amlogic: t7: khadas-vim4: Add MMC nodes arm64: dts: amlogic: t7: khadas-vim4: Add SDIO power sequence and WiFi clock arm64: dts: amlogic: t7: Add PWM controller nodes arm64: dts: amlogic: t7: Add MMC controller nodes arm64: dts: amlogic: t7: Add clock controller nodes arm64: dts: amlogic: meson-s4-s905y4-khadas-vim1s: use rc-khadas keymap arm64: dts: amlogic: meson-s4-s905y4-khadas-vim1s: enable HYM8563 RTC arm64: dts: amlogic: meson-s4: add VRTC node arm64: dts: amlogic: meson-s4-s905y4-khadas-vim1s: add Function key support arm64: dts: amlogic: meson-s4: add internal SARADC controller arm64: dts: amlogic: t7: khadas-vim4: Add power regulators arm64: dts: amlogic: t7: Add PWM pinctrl nodes arm64: dts: amlogic: t7: Add eMMC, SD card and SDIO pinctrl nodes arm64: dts: amlogic: meson-s4-s905y4-khadas-vim1s: add POWER key support arm64: dts: amlogic: meson-s4-s905y4-khadas-vim1s: add PWM LED support arm64: dts: amlogic: meson-s4-s905y4-khadas-vim1s: enable bluetooth ... Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> |
||
|
|
77510b39ee |
RISC-V SpacemiT DT changes for 7.2
For K3 SoC - Add Ziccrse extension - Add PWM support - Add PDMA support - Add USB2.0 support - Add CoM260-IFX board - Add DeepComputing FML13V05 board - Fix I/O power of pinctrl For K1 SoC - Add Micro SD card support - Add baudrate to console - Add SPI support - Enable thermal sensor - Fix 32K clock For boards of K1 - Milk-V Jupiter - Enable eMMC - MusePi-Pro - Enable EEPROM/PCIe/QSPI/USB - OrangePi R2S - Enable PMIC/USB3 - OrangePi RV2 - Enable eMMC/I2C/PCIe/PMIC/QSPI/USB -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQKvBAABCgCZFiEEtbq4ycMbcRVnAiPcMarqR1lNu+0FAmoefQAbFIAAAAAABAAO bWFudTIsMi41KzEuMTIsMiwyXxSAAAAAAC4AKGlzc3Vlci1mcHJAbm90YXRpb25z Lm9wZW5wZ3AuZmlmdGhob3JzZW1hbi5uZXRCNUJBQjhDOUMzMUI3MTE1NjcwMjIz REMzMUFBRUE0NzU5NERCQkVEAAoJEDGq6kdZTbvt6ckP/jCv7or+dzs2Pjcaa9/Z HaMnbriUS3u83KFRJ4Gf7O55fUzWq7Tl+fejoWrh5UF5lkSe9f5TT6sv/l9XOetE CB6slypX4Qzv1FNP9owMo646GeyUrOKQz8dxSsUtcZf5UpFWHfgvgz2NW5gr+s6m 6jf+TGOsK1ge9haIKmxp3Zzhlh3j/p0pvc8WprNg9EV+wTFmn7QHRNn6Y3tkpHLM x4dms3oOLOHp8JXQ29cJZp3Jqkgpjx8mxUnH2zkGdW4R9xvDgN9qG48qPmKgT1eE JnilE3wGMjVHW5JtFDFT2PWzb6A4ZijKsHVGZ7T+YoOrsE8imY7EQxQkZwl7e8bc cnKPbx6/RN1Kj3ifCEDXbulQtorxMsE4wMkUeJ1BmMvlHiZ9NUMHLRjMnnVlWlpN ltCx/qdxwEmFLcajMf8vBxPDlETHjE+w8U66vJwb4TKXnOLfs8b7bZA5HOQMc7ZB EWbkxYLBtEj1R4Q32kFvlQGjPVt7vdTtBeG9ZAJWq9FqU1vVH97+lERw7/v16fHp SZqP7z+aApWgxa3Xxr+eUHjgTRyJEeOW/RGrIXOPU1188SWqxpejf68skASpMGoa kgjqnS7fN3TXHtkGFGYOGiqTKOuuCnmr1QPmOOd9ALZnFUgr37CCY5BQMH0m5ci7 5odjSub1Wu0VTW4vwnohlXQU =lNAs -----END PGP SIGNATURE----- Merge tag 'spacemit-dt-for-7.2-1' of https://github.com/spacemit-com/linux into soc/dt RISC-V SpacemiT DT changes for 7.2 For K3 SoC - Add Ziccrse extension - Add PWM support - Add PDMA support - Add USB2.0 support - Add CoM260-IFX board - Add DeepComputing FML13V05 board - Fix I/O power of pinctrl For K1 SoC - Add Micro SD card support - Add baudrate to console - Add SPI support - Enable thermal sensor - Fix 32K clock For boards of K1 - Milk-V Jupiter - Enable eMMC - MusePi-Pro - Enable EEPROM/PCIe/QSPI/USB - OrangePi R2S - Enable PMIC/USB3 - OrangePi RV2 - Enable eMMC/I2C/PCIe/PMIC/QSPI/USB * tag 'spacemit-dt-for-7.2-1' of https://github.com/spacemit-com/linux: (35 commits) riscv: dts: spacemit: enable PMIC on OrangePi R2S dts: riscv: spacemit: k3: Fix I/O power settings riscv: dts: spacemit: k3: Add Ziccrse extension for X100 cores riscv: dts: spacemit: k3: Initial support for CoM260-IFX board dt-bindings: riscv: spacemit: Add K3 CoM260-IFX board riscv: dts: spacemit: k1-musepi-pro: add SD card support with UHS modes riscv: dts: spacemit: k3: Add pwm support riscv: dts: spacemit: fix uboot partition offset on Milk-V Jupiter riscv: dts: spacemit: enable SD card support on Milk-V Jupiter riscv: dts: spacemit: enable eMMC on Milk-V Jupiter riscv: dts: spacemit: sort aliases on Milk-V Jupiter riscv: dts: spacemit: set console baud rate on Milk-V Jupiter riscv: dts: spacemit: enable USB3 on OrangePi R2S riscv: dts: spacemit: Add thermal sensor for K1 SoC riscv: dts: spacemit: Add PDMA controller node for K3 SoC riscv: dts: spacemit: enable QSPI for OrangePi RV2 riscv: dts: spacemit: k1-musepi-pro: set default console baud rate riscv: dts: spacemit: k1-musepi-pro: enable PCIe ports riscv: dts: spacemit: k1-musepi-pro: enable USB 3 ports riscv: dts: spacemit: k1-musepi-pro: enable QSPI and add SPI NOR ... Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> |
||
|
|
d7f82a3fd1 |
T-HEAD Devicetrees for 7.2
Enable wifi on two TH1520 boards: BeagleV Ahead and Lichee Pi 4a. The BeagleV Ahead board uses an AP6203BM WiFi module connected to SDIO1. The Lichee Pi 4A has an RTL8723DS WiFi module also connected to SDIO1. The module reset line is driven through a PCA9557 GPIO expander on the I2C1 bus. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSy8G7QpEpV9aCf6Lbb7CzD2SixDAUCah4clQAKCRDb7CzD2Six DF2AAQDknKUINZIFy4xuYA9J45iwjHOXxwo0YAWKKX5QFu5avgEAyQN+P31Vgjyi dzh1ilkH+nSO/blbeh8p8kaR3T8+AQ4= =ovaG -----END PGP SIGNATURE----- Merge tag 'thead-dt-for-v7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/fustini/linux into soc/dt T-HEAD Devicetrees for 7.2 Enable wifi on two TH1520 boards: BeagleV Ahead and Lichee Pi 4a. The BeagleV Ahead board uses an AP6203BM WiFi module connected to SDIO1. The Lichee Pi 4A has an RTL8723DS WiFi module also connected to SDIO1. The module reset line is driven through a PCA9557 GPIO expander on the I2C1 bus. * tag 'thead-dt-for-v7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/fustini/linux: riscv: dts: thead: Enable wifi on the BeagleV-Ahead riscv: dts: thead: Enable WiFi on Lichee Pi 4A riscv: dts: thead: Add TH1520 I2C1 controller Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> |
||
|
|
6b2b89b1bc |
Tenstorrent device tree for v7.2
Add a riscv,pmu node to the Tenstorrent Blackhole SoC device tree. This enables OpenSBI to expose the SBI PMU extension, allowing Linux perf to use the 4 programmable counters (mhpmcounter3-6) across 3 event classes: instruction commit, microarchitectural, and memory system events. Extend the RISC-V IOMMU device tree bindings to document the Tenstorrent IOMMU used in the Tenstorrent Atlantis SoC. A second register range is added which contains M-mode only registers like PMAs and PMPs. The binding will be used by OpenSBI and potentially other M-mode software. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSy8G7QpEpV9aCf6Lbb7CzD2SixDAUCah4MhgAKCRDb7CzD2Six DKgDAP93cm8LE7eQTxSWGdgcgWG+tQrb+E/5qcjt8oN4vqOHkQEAw2+Fk1hxvxIz LvM2xAg+1REKuW3tYJjVfB/m6e9LagE= =bY/J -----END PGP SIGNATURE----- Merge tag 'tenstorrent-dt-for-v7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/tenstorrent/linux into soc/dt Tenstorrent device tree for v7.2 Add a riscv,pmu node to the Tenstorrent Blackhole SoC device tree. This enables OpenSBI to expose the SBI PMU extension, allowing Linux perf to use the 4 programmable counters (mhpmcounter3-6) across 3 event classes: instruction commit, microarchitectural, and memory system events. Extend the RISC-V IOMMU device tree bindings to document the Tenstorrent IOMMU used in the Tenstorrent Atlantis SoC. A second register range is added which contains M-mode only registers like PMAs and PMPs. The binding will be used by OpenSBI and potentially other M-mode software. * tag 'tenstorrent-dt-for-v7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/tenstorrent/linux: dt-bindings: iommu: riscv: Add bindings for Tenstorrent RISC-V IOMMU riscv: dts: tenstorrent: Add PMU node to blackhole for Linux perf support Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> |
||
|
|
91ee0f80cf |
Renesas DTS updates for v7.2 (take two)
- Add timer (MTU3) and xSPI FLASH support for the RZ/T2H and RZ/N2H
SoCs and their EVK boards,
- Add PCIe support for the RZ/V2N SoC and the RZ/V2N EVK board,
- Add support for the R-Car M3Le SoC and the Geist development board,
- Specify ethernet PHY reset timings on various R-Car boards,
- Add (more) serial, I2C, DMA, and sound support for the RZ/G3L SoC,
- Add PSCI, Multifunctional Interface (MFIS), and SCMI support for the
R-Car X5H SoC and Ironhide development board,
- Add serial DMA support for the RZ/G2L SoC,
- Add keyboard, I2C, Versa clock, and audio support for the RZ/G3L
SMARC SoM and EVK boards,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCah1IuAAKCRCKwlD9ZEnx
cBZlAQC5g/OyC8m5v5ukI2/nNkQVE2AhvxJ19g11ZNGnnulTXwEAk6aw4+Pu793+
6Sq3KyVKlbtIK24sap/tVFCaqaxK0wI=
=BK85
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v7.2-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v7.2 (take two)
- Add timer (MTU3) and xSPI FLASH support for the RZ/T2H and RZ/N2H
SoCs and their EVK boards,
- Add PCIe support for the RZ/V2N SoC and the RZ/V2N EVK board,
- Add support for the R-Car M3Le SoC and the Geist development board,
- Specify ethernet PHY reset timings on various R-Car boards,
- Add (more) serial, I2C, DMA, and sound support for the RZ/G3L SoC,
- Add PSCI, Multifunctional Interface (MFIS), and SCMI support for the
R-Car X5H SoC and Ironhide development board,
- Add serial DMA support for the RZ/G2L SoC,
- Add keyboard, I2C, Versa clock, and audio support for the RZ/G3L
SMARC SoM and EVK boards,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v7.2-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (56 commits)
arm64: dts: renesas: r9a08g046l48-smarc: Enable audio
arm64: dts: renesas: rzg3l-smarc-som: Enable Versa clock generator
arm64: dts: renesas: r9a08g046l48-smarc: Enable I2C{2,3} devices
arm64: dts: renesas: r9a08g046l48-smarc: Add gpio keys
arm64: dts: renesas: rzt2h-n2h-evk: Enable xSPI nodes
arm64: dts: renesas: r9a09g087: Add xSPI nodes
arm64: dts: renesas: r9a09g077: Add xSPI nodes
arm64: dts: renesas: rzg3e-smarc-som: Sort GMAC pinmux entries
arm64: dts: renesas: r8a779md: Add support for R-Car M3Le R8A779MD Geist
arm64: dts: renesas: r9a07g044: Add DMA properties to serial nodes
arm64: dts: renesas: r9a07g054: Add max-frequency to SDHI nodes
arm64: dts: renesas: r9a07g044: Add max-frequency to SDHI nodes
arm64: dts: renesas: r9a07g043: Add max-frequency to SDHI nodes
arm64: dts: renesas: r9a08g046: Add rsci{0..3} device nodes
arm64: dts: renesas: ironhide: Enable to use SCMI
arm64: dts: renesas: r8a78000: Add MFIS, MFIS-SCP, and transport nodes
arm64: dts: renesas: ironhide: Describe all reserved memory
arm64: dts: renesas: rzt2h-n2h-evk: Configure eMMC/SDHI pins
arm64: dts: renesas: r8a78000: Fix GIC-720AE View 1 Redistributor description
arm64: dts: renesas: r8a78000: Add PSCI node
...
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
||
|
|
af666a0e20 |
MediaTek ARM64 DeviceTree updates
This adds improvements for already supported SoCs and devices.
In particular:
- Adds support for the MT7981 SoC's Crypto Accelerator
- Enables gpio-keys and leds found on the MT7981b based
Xiaomi AX3000T router
- Adds new variants of MT7988 BananaPi BPi-R4 Pro
- ...and some spare cleanups for all BPi-R4 Pro boards
- Adds a MediaTek MT6365 devicetree and uses it in all of
the relevant supported boards in place of MT6359, where
needed (the MT6365 PMIC is a fully compatible variant
of the MT6359 PMIC, but still not named MT6359).
- Adds correct power supplies for CPUs and devices on a
variety of MediaTek Chromebooks and Genio AIoT boards,
including:
- MT8186 Corsola Chromebooks
- MT8192 Asurada Chromebooks
- MT8195 Cherry Chromebooks
- MT8390 Genio based boards
- MT8395 Genio based boards
- Adds HDMI TX support for Ezurio Tungsten 510/700 boards.
-----BEGIN PGP SIGNATURE-----
iLoEABYKAGIWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCahVwBRsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDIoHGFuZ2Vsb2dpb2FjY2hpbm8uZGVscmVnbm9AY29s
bGFib3JhLmNvbQAKCRCaNgTPrZeEeKolAQC/VhSPV8DQzEgMGUSSUQ+AokBK6HBD
yDPMsehRRhRpqwD+LiFuxt/nWv0Yf5w0DAxyHfpm+jfptABfqCP5tTlH1Aw=
=LDfi
-----END PGP SIGNATURE-----
Merge tag 'mtk-dts64-for-v7.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM64 DeviceTree updates
This adds improvements for already supported SoCs and devices.
In particular:
- Adds support for the MT7981 SoC's Crypto Accelerator
- Enables gpio-keys and leds found on the MT7981b based
Xiaomi AX3000T router
- Adds new variants of MT7988 BananaPi BPi-R4 Pro
- ...and some spare cleanups for all BPi-R4 Pro boards
- Adds a MediaTek MT6365 devicetree and uses it in all of
the relevant supported boards in place of MT6359, where
needed (the MT6365 PMIC is a fully compatible variant
of the MT6359 PMIC, but still not named MT6359).
- Adds correct power supplies for CPUs and devices on a
variety of MediaTek Chromebooks and Genio AIoT boards,
including:
- MT8186 Corsola Chromebooks
- MT8192 Asurada Chromebooks
- MT8195 Cherry Chromebooks
- MT8390 Genio based boards
- MT8395 Genio based boards
- Adds HDMI TX support for Ezurio Tungsten 510/700 boards.
* tag 'mtk-dts64-for-v7.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (37 commits)
arm64: dts: mediatek: add LED and key support on Xiaomi AX3000T
arm64: dts: mediatek: mt8195-cherry: Sort top level nodes correctly
arm64: dts: mediatek: mt8195-cherry: Fix names for EC controlled regulators
arm64: dts: mediatek: mt8192-asurada: Add (BT|WIFI)_KILL_1V8_L GPIO line names
arm64: dts: mediatek: mt8192-asurada: Fix SPI-NOR flash compatible
arm64: dts: mediatek: mt8390-tungsten-smarc: add HDMI support
arm64: dts: mediatek: mt8188-geralt: Add little core CPU power supplies
arm64: dts: mediatek: mt8188-geralt: Add MT6359 PMIC supplies
arm64: dts: mediatek: mt8195-cherry: Add vusb33 supplies for XHCI controllers
arm64: dts: mediatek: mt8195-cherry: Add supply for SPI NOR flash
arm64: dts: mediatek: mt8195-cherry: Fix VBUS regulator description
arm64: dts: mediatek: mt8195-cherry: Add supplies for ChromeOS EC regulators
arm64: dts: mediatek: mt8195-cherry: Add MT6315 PMIC supplies
arm64: dts: mediatek: mt8195-cherry: Add MT6359 PMIC supplies
arm64: dts: mediatek: mt8192-asurada: Fix WiFi regulator description
arm64: dts: mediatek: mt8192-asurada: Add SPI NOR flash power supply
arm64: dts: mediatek: mt8192-asurada: Add CPU power supplies
arm64: dts: mediatek: mt8192-asurada: Add supplies for ChromeOS EC regulators
arm64: dts: mediatek: mt8192-asurada: Add MT6315 PMIC supplies
arm64: dts: mediatek: mt8192-asurada: Add MT6359 PMIC supplies
...
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
||
|
|
9179b2ba07 |
MediaTek ARM32 DeviceTree updates
This adds support for the ARMv7 Timer node in the MT6589 SoC and performs a couple of dtbs_check fixes in MT7623 and in MT8135 devicetrees. -----BEGIN PGP SIGNATURE----- iLoEABYKAGIWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCahVw0xsUgAAAAAAEAA5t YW51MiwyLjUrMS4xMiwyLDIoHGFuZ2Vsb2dpb2FjY2hpbm8uZGVscmVnbm9AY29s bGFib3JhLmNvbQAKCRCaNgTPrZeEeOfgAQDkoxPtOpgCxE15pQJBSQO1wyYAREDX k2uMGtcFptK8jAD/awEIME5N3++HtSN+IEFsJwkj7vcdo/H+ZNVBgUyuDwk= =UxIz -----END PGP SIGNATURE----- Merge tag 'mtk-dts32-for-v7.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt MediaTek ARM32 DeviceTree updates This adds support for the ARMv7 Timer node in the MT6589 SoC and performs a couple of dtbs_check fixes in MT7623 and in MT8135 devicetrees. * tag 'mtk-dts32-for-v7.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: arm: dts: mediatek: mt8135: fix pinctrl node name arm: dts: mediatek: mt7623: fix pinctrl controller node name arm: dts: mediatek: mt7623: fix pinctrl child node names arm: dts: mediatek: mt6589: Add Arm Generic Timer node Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> |
||
|
|
c10cfc9522 |
arm64: dts: imx{91,93}-phyboard-segin: Add peb-av-18 overlays
Add overlay for the PHYTEC Audio/Video adapter module PEB-AV-18 on phyBOARD-Segin-i.MX91/93 boards. The supported AC220 display is Powertip PH800480T032-ZHC19 panel with a backlight and Ilitek touch-screen controller. Signed-off-by: Florijan Plohl <florijan.plohl@norik.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> |
||
|
|
b3c52872bf |
arm64: dts: imx93-var-som-symphony: enable ADC
Enable ADC1 on the Symphony carrier board and describe its 1.8 V reference supply. Signed-off-by: Stefano Radaelli <stefano.r@variscite.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> |
||
|
|
4b1433a0d1 |
arm64: dts: imx93-var-som-symphony: enable TPM3 PWM
Enable TPM3 on the Symphony carrier board and add the pinctrl states for the PWM output and sleep configuration. Signed-off-by: Stefano Radaelli <stefano.r@variscite.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> |
||
|
|
17f1681fc7 |
arm64: dts: imx93-var-som-symphony: keep RGB_SEL low
Keep the RGB_SEL line driven low on the Symphony carrier board. This avoids leaving the line floating and ensures the board remains in the expected display configuration. Signed-off-by: Stefano Radaelli <stefano.r@variscite.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> |
||
|
|
cca15b4590 |
arm64: dts: imx93-var-som-symphony: enable UART7
Enable UART7 on the Symphony carrier board and add its pinctrl configuration. Signed-off-by: Stefano Radaelli <stefano.r@variscite.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> |
||
|
|
6dc737d7da |
arm64: dts: imx93-var-som-symphony: add TPM support
Add the ST33KTPM2XI2C TPM device on the Symphony carrier board. The TPM reset line is driven through a PCAL6408 GPIO expander, so add the expander on the I2C bus and describe the TPM reset GPIO. Signed-off-by: Stefano Radaelli <stefano.r@variscite.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> |
||
|
|
4faac185cc |
arm64: dts: imx91-var-som-symphony: fix RGB_SEL handling
RGB_SEL is a board-level signal driven by the PCAL6408 GPIO expander on
the Symphony carrier board.
The signal needs to be driven high on the i.MX91 variant to keep the
board in the expected display configuration. Move the handling of this
line from a fixed regulator tied to the PCAL6408 supply to a GPIO hog on
the correct GPIO expander.
Fixes:
|
||
|
|
08886fa69c |
arm64: dts: freescale: fsl-ls1028a-tqmls1028a-mbls1028a: switch mmc aliases
All modern TQ-Systems boards follow the convention that mmc0 is the eMMC
and mmc1 is the SD-card when both interfaces exist, reducing differences
between boards for both documentation and U-Boot code (which uses the
same Device Trees). Adjust the recently added MBLS1028A Device Tree
accordingly.
Fixes:
|
||
|
|
41b45d26d2 |
arm64: dts: imx943-evk-sdwifi: add a new dtso to support SDIW612 WiFi
Add a new imx943-evk-sdwifi.dtso to support SDIW612 WiFi chip on imx943-evk board, the default imx943-evk.dtb is used to support PCIE AW693 WiFi. Use separate dts for SDIW612 and PCIe AW693 WiFi to avoid the shared regulator between SDIO and PCIe buses, the random probe order between the two buses may break the PCIe initialization sequence which cause AW693 has probability of failing to detect. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> |
||
|
|
5b19ca5274 |
arm64: dts: imx8mp-kontron: Fix GPIO for display power switch
The GPIO that controls the power supply for the LVDS display
connector has changed between early prototypes and the current
production design of the hardware. Reflect this change in the
devicetree to properly switch on the panel supply.
This was working before even with the wrong GPIO due to the
bidirectional level shifter used on the board which drives the EN
signal high even when the input has a (weak) pull down configured as
reset condition of the SoC pad. As a result the display was working
but the supply was always on.
Tested on BL i.MX8MP to show the correct voltage level on the level
shifter input.
Fixes:
|
||
|
|
3f519121e1 |
arm64: dts: freescale: imx95-aquila: Add Clover carrier board
Add support for the Aquila i.MX95 SoM mated with the Clover carrier board. Clover is a low-cost carrier board for the Aquila family featuring a small form factor (Nano-ITX 120mm x 120mm) and built for volume production. Link: https://www.toradex.com/computer-on-modules/aquila-arm-family/nxp-imx95 Link: https://www.toradex.com/products/carrier-board/clover Signed-off-by: Antoine Gouby <antoine.gouby@toradex.com> Signed-off-by: Franz Schnyder <franz.schnyder@toradex.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> |
||
|
|
d5c082ba23 |
arm64: dts: freescale: add Aquila iMX95 support
Add support for the Toradex Aquila iMX95 and its development carrier board. The module consists of an NXP i.MX95 family SoC, up to 16GB LPDDR5 RAM, up to 128GB of storage, a USB 3.2 OTG and USB 2.0 Host, a Gigabit Ethernet PHY, a 10 Gigabit Ethernet interface, an I2C EEPROM and Temperature Sensor, an RX8130 RTC, one Quad lane CSI interface, one Quad lane DSI or CSI interface, one LVDS interface (one or two channels), and some optional addons: DisplayPort (through a DSI-DP bridge), TPM 2.0, and a WiFi/BT module. Link: https://www.toradex.com/computer-on-modules/aquila-arm-family/nxp-imx95 Link: https://www.toradex.com/products/carrier-board/aquila-development-board-kit Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com> Co-developed-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Co-developed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Co-developed-by: Antoine Gouby <antoine.gouby@toradex.com> Signed-off-by: Antoine Gouby <antoine.gouby@toradex.com> Co-developed-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com> Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com> Co-developed-by: Franz Schnyder <franz.schnyder@toradex.com> Signed-off-by: Franz Schnyder <franz.schnyder@toradex.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> |