The Renesas RZ/T2H (R9A09G077) SoC has an MTU3 block.
Add support for it.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260410163530.383818-10-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The TCIU8 interrupt used to be documented in earlier revisions of the
user manuals, but has since been removed. The corresponding entry is
now marked as reserved in the interrupt mapping tables of all supported
SoCs.
- Page 486, Table 8.2 Interrupt mapping (7/13) in the Renesas RZ/G2UL
Rev.1.40 User Manual
- Page 363, Table 8.2 Interrupt Mapping (6/13) in the Renesas RZ/Five
Rev.1.30 User Manual
- Page 528, Table 8.2 Interrupt mapping (7/13) in the Renesas RZ/G2L
and RZ/G2LC Rev.1.50 User Manual
- Page 540, Table 8.2 Interrupt mapping (7/13) in the Renesas RZ/V2L
Rev.1.50 User Manual
Remove the TCIU8 interrupt. This does not cause any breakage as the
driver does not make use of the interrupts.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260410163530.383818-9-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Describe coresight topology on R-Mobile APE6. Extend the current PTM node
with connection funnel, TPIU, ETB and replicator. The coresight on this
hardware is clocked from the ZT/ZTR trace clock.
Note that only core 0 part of the topology is described, because the
other cores are still not present in the DT.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260502185557.93061-5-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add ZT trace bus and ZTR trace clock on the R-Mobile APE6.
These clock supply the coresight tracing modules, PTM, TPIU,
ETB and replicator. Without these clock, the coresight tracing
can not be operated.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260502185557.93061-4-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Document the ZT trace bus and ZTR trace clocks on R-Mobile APE6. These
clocks supply the coresight tracing modules, PTM, TPIU, ETB and
replicator. Without these clocks, coresight tracing can not be
operated. While this does change the ABI, it does so by extending the
existing clock-output-names, therefore if old software is used with new
DT, the coresight tracing parts will likely fail to probe, otherwise if
new software is used with an old DT, there is no impact.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260502185557.93061-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add pin control configuration for the ETH0 Ethernet interface on the
RZ/G3L SMARC SoM board and also enable hotplug support.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260430125342.439755-6-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add pincontrol node to RZ/G3L ("R9A08G046") SoC DTSI and set the icu as
the interrupt-parent of the pin controller to route GPIO interrupts
through the IA55 interrupt controller.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260430125342.439755-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add reset-names properties to the pin control nodes for
RZ/{G2L,G2UL,G3E,G3S} and RZ/{V2H,V2L,V2N} SoCs.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260317101627.174491-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Pin Control DT bindings and binding definitions for the Renesas RZ/G3L
(R9A08G046) SoC, shared by driver and DT source files.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCagGbvwAKCRCKwlD9ZEnx
cFqvAQCHXu26Wa1NofTCjZkXFWDCCDv5Mku42tZdgy4FxAipagEArInzwVlKhr5u
q9YGJ0ayxbfRpSSEyoNNTNojkXEyJw8=
=bHGM
-----END PGP SIGNATURE-----
Merge tag 'renesas-r9a08g046-dt-binding-defs-tag2' into renesas-dts-for-v7.2
Renesas RZ/G3L DT Pin Control Binding Definitions
Pin Control DT bindings and binding definitions for the Renesas RZ/G3L
(R9A08G046) SoC, shared by driver and DT source files.
Describe the coresight topology on R-Mobile A1. Extend the current PTM
node with connection funnel, TPIU, ETB and replicator. Coresight on
this hardware is clocked from the ZT/ZTR trace clocks.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260422233744.149872-5-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add ZT trace bus and ZTR trace clocks on R-Mobile A1.
These clocks supply the coresight tracing modules, PTM, TPIU, ETB and
replicator. Without these clock, coresight tracing can not be operated.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260422233744.149872-4-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable the Gigabit Ethernet Interfaces (GBETH0) populated on the RZ/G3L
SMARC EVK. The eth1, pincontrol definitions and hotplug support will be
added later.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260326111953.31024-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add documentation for the pin controller found on the Renesas RZ/G3L
(R9A08G046) SoC. The RZ/G3L PFC is similar to the RZ/G3S SoC but has
more pins.
Also add header file similar to RZ/G3E and RZ/V2H as it has alpha
numeric ports.
Document renesas,clonech property for controlling clone channel
control register located on SYSC IP block on RZ/G3L SoC.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260430093422.74812-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The DATA-packet handler in rxrpc_input_call_event() and the RESPONSE
handler in rxrpc_verify_response() copy the skb to a linear one before
calling into the security ops only when skb_cloned() is true. An skb
that is not cloned but still carries externally-owned paged fragments
(e.g. SKBFL_SHARED_FRAG set by splice() into a UDP socket via
__ip_append_data, or a chained skb_has_frag_list()) falls through to
the in-place decryption path, which binds the frag pages directly into
the AEAD/skcipher SGL via skb_to_sgvec().
Extend the gate to also unshare when skb_has_frag_list() or
skb_has_shared_frag() is true. This catches the splice-loopback vector
and other externally-shared frag sources while preserving the
zero-copy fast path for skbs whose frags are kernel-private (e.g. NIC
page_pool RX, GRO). The OOM/trace handling already in place is reused.
Fixes: d0d5c0cd1e ("rxrpc: Use skb_unshare() rather than skb_cow_data()")
Cc: stable@vger.kernel.org
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Mark the DDR bus clk critical in the SpaceMiT driver so that
boot doesn't fail
- Fix boot on Mobile EyeQ by creating the auxiliary device for
the ethernet PHY
- Plug an OF node leak in Rockchip rk808 clk driver
-----BEGIN PGP SIGNATURE-----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=yAV8
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk driver fixes from Stephen Boyd:
- Mark the DDR bus clk critical in the SpaceMiT driver so that
boot doesn't fail
- Fix boot on Mobile EyeQ by creating the auxiliary device for
the ethernet PHY
- Plug an OF node leak in Rockchip rk808 clk driver
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: rk808: fix OF node reference imbalance
MAINTAINERS: add myself as a reviewer for the clk subsystem
reset: eyeq: drop device_set_of_node_from_dev() done by parent
clk: eyeq: add EyeQ5 children auxiliary device for generic PHYs
clk: eyeq: use the auxiliary device creation helper
clk: spacemit: k3: mark top_dclk as CLK_IS_CRITICAL
BPF_MAP_TYPE_ARENA accepts BPF_PSEUDO_MAP_VALUE offsets at exactly
the end of the arena mapping (off == arena_size). The boundary check
in arena_map_direct_value_addr() uses `>` instead of `>=`, which
incorrectly allows a one-past-end pointer to be accepted.
Change the condition to `>=` to correctly reject offsets that fall
outside the valid arena user_vm range.
Fixes: 317460317a ("bpf: Introduce bpf_arena.")
Signed-off-by: Junyoung Jang <graypanda.inzag@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260426172505.1947915-1-graypanda.inzag@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
XSKMAP entries are used as redirect targets for incoming XDP frames.
A TX-only AF_XDP socket lacks an Rx ring and cannot handle redirected
traffic, but xsk_map_update_elem() currently allows such sockets to
be inserted into the map.
Redirecting packets to such a socket on the veth generic-XDP path
causes a kernel crash in xsk_generic_rcv().
This became possible after xsk_is_setup_for_bpf_map() was removed from
the XSKMAP update path, which allowed bound TX-only sockets to be
inserted into the map.
Reject TX-only sockets during XSKMAP updates to avoid the crash.
They remain fully operational for pure Tx purposes outside XSKMAP.
Fixes: 968be23cea ("xsk: Fix possible segfault at xskmap entry insertion")
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Yifan Wu <yifanwucs@gmail.com>
Signed-off-by: Linpu Yu <linpu5433@gmail.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20260508144344.694-1-linpu5433@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Because subprog 0, the main subprog, is considered a global function,
we end up running the arg-tracking dataflow analysis twice on it. That
results in slightly longer verification but mostly in more verbose
verifier logs. This patch fixes it by keeping only the iteration over
global subprogs.
When running over all of Cilium's programs with BPF_LOG_LEVEL2, this
reduces verbosity by ~20% on average.
Fixes: bf0c571f7f ("bpf: introduce forward arg-tracking dataflow analysis")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/e4d7b53d4963ef520541a782f5fc8108a168877c.1778176504.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fix a regression in overlayfs caused by an fsverity API change
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaf97zhQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK+PtAQDzevIJ21gYwhimSRxpbB/eDRQO3gD2
wz4bz2lXZiCjIwEA8rktrlFgrLeqo1W252YXGpvlczf5qgupos3t4Hm8LAk=
=WsMl
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux
Pull fsverity fix from Eric Biggers:
"Fix a regression in overlayfs caused by an fsverity API change"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
ovl: fix verity lazy-load guard broken by fsverity_active() semantic change
Here are two small staging driver fixes for 7.1-rc3. They are:
- vme_user root device leak fix
- NULL dereference bugfix in the rtl8723bs driver
Both of these have been in linux-next all this week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaf7ksA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk3cACgjbF86RGquBMOmCvW0y05gLGXACsAoM4cOfQd
Wel+rDTKUoa6FvreddHi
=vHTv
-----END PGP SIGNATURE-----
Merge tag 'staging-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are two small staging driver fixes for 7.1-rc3. They are:
- vme_user root device leak fix
- NULL dereference bugfix in the rtl8723bs driver
Both of these have been in linux-next all this week with no reported
issues"
* tag 'staging-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: os_dep: avoid NULL pointer dereference in rtw_cbuf_alloc
staging: vme_user: fix root device leak on init failure
Here are some small USB driver fixes for 7.1-rc3 to resolve some
reported issues, and a new device id. These are:
- usblp driver heap leak fixes
- ulpi driver memory leak fix
- typec driver fixes
- dwc3 driver fix
- omap dma driver fix
- new option driver device id addition
All of these have been in linux-next for over a week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaf7mNg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylbXACfWg3KnXzN+gCG8PM/zVLtinrAhDgAoLzKi1xv
OqVhzuOICtZiP8WBoBoC
=SeVl
-----END PGP SIGNATURE-----
Merge tag 'usb-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes for 7.1-rc3 to resolve some
reported issues, and a new device id. These are:
- usblp driver heap leak fixes
- ulpi driver memory leak fix
- typec driver fixes
- dwc3 driver fix
- omap dma driver fix
- new option driver device id addition
All of these have been in linux-next for over a week with no reported
issues"
* tag 'usb-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Telit Cinterion LE910Cx compositions
usb: usblp: fix uninitialized heap leak via LPGETSTATUS ioctl
usb: usblp: fix heap leak in IEEE 1284 device ID via short response
usb: dwc3: Move GUID programming after PHY initialization
usb: typec: tcpm: fix debug accessory mode detection for sink ports
usb: typec: tcpm: reset internal port states on soft reset AMS
usb: ulpi: fix memory leak on ulpi_register() error paths
USB: omap_udc: DMA: Don't enable burst 4 mode
- sanitize more input parameters in the core (found by syzkaller)
- usual set of driver fixes (proper completion handling, applying
quirks, correct workqueue selection...)
- ID additions to simplify dependency handling
- new email address for Peter Rosin
-----BEGIN PGP SIGNATURE-----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=rlX+
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- sanitize more input parameters in the core (found by syzkaller)
- usual set of driver fixes (proper completion handling, applying
quirks, correct workqueue selection...)
- ID additions to simplify dependency handling
- new email address for Peter Rosin
* tag 'i2c-for-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: smbus: reject oversized block transfers in the common path
MAINTAINERS: Update mail for Peter Rosin
i2c: stub: Reject I2C block transfers with invalid length
i2c: Compare the return value of gpiod_get_direction against GPIO_LINE_DIRECTION_OUT
i2c: dev: prevent integer overflow in I2C_TIMEOUT ioctl
i2c: acpi: Add ELAN0678 to i2c_acpi_force_100khz_device_ids
dt-bindings: i2c: apple,i2c: Add t8122 compatible
i2c: stm32f7: reinit_completion() per transfer not per msg
dt-bindings: i2c: amlogic: Add compatible for T7 SOC
i2c: testunit: Replace system_long_wq with system_dfl_long_wq
- Fix KASAN sanitization flag for core_$(BITS).o
- Fixes for handling offset values in pseries htmdump
- Fix interrupt mask in cpm1_gpiochip_add16()
- ps3/pasemi fixes to drop redundant result assignment
- Fixes in papr-hvpipe code path
- powerpc/perf: Update check for PERF_SAMPLE_DATA_SRC marked events
Thanks to:
Aboorva Devarajan, Athira Rajeev, Christophe Leroy (CS GROUP), Geert
Uytterhoeven, Haren Myneni, Krzysztof Kozlowski, Mukesh Kumar Chaurasiya (IBM),
Nathan Chancellor, Ritesh Harjani (IBM), Shivani Nittor, Sourabh Jain, Thomas
Zimmermann, Venkat Rao Bagalkote
-----BEGIN PGP SIGNATURE-----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=ZRl8
-----END PGP SIGNATURE-----
Merge tag 'powerpc-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Fix KASAN sanitization flag for core_$(BITS).o
- Fixes for handling offset values in pseries htmdump
- Fix interrupt mask in cpm1_gpiochip_add16()
- ps3/pasemi fixes to drop redundant result assignment
- Fixes in papr-hvpipe code path
- powerpc/perf: Update check for PERF_SAMPLE_DATA_SRC marked events
Thanks to Aboorva Devarajan, Athira Rajeev, Christophe Leroy (CS GROUP),
Geert Uytterhoeven, Haren Myneni, Krzysztof Kozlowski, Mukesh Kumar
Chaurasiya (IBM), Nathan Chancellor, Ritesh Harjani (IBM), Shivani
Nittor, Sourabh Jain, Thomas Zimmermann, and Venkat Rao Bagalkote.
* tag 'powerpc-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (21 commits)
powerpc/pasemi: Drop redundant res assignment
powerpc/ps3: Drop redundant result assignment
powerpc/vdso: Drop -DCC_USING_PATCHABLE_FUNCTION_ENTRY from 32-bit flags with clang
arch/powerpc: Drop CONFIG_FIRMWARE_EDID from defconfig files
powerpc/perf: Update check for PERF_SAMPLE_DATA_SRC marked events
powerpc/8xx: Fix interrupt mask in cpm1_gpiochip_add16()
powerpc/vmx: avoid KASAN instrumentation in enter_vmx_ops() for kexec
powerpc/kdump: fix KASAN sanitization flag for core_$(BITS).o
pseries/papr-hvpipe: Fix style and checkpatch issues in enable_hvpipe_IRQ()
pseries/papr-hvpipe: Refactor and simplify hvpipe_rtas_recv_msg()
pseries/papr-hvpipe: Kill task_struct pointer from struct hvpipe_source_info
pseries/papr-hvpipe: Simplify spin unlock usage in papr_hvpipe_handle_release()
pseries/papr-hvpipe: Fix the usage of copy_to_user()
pseries/papr-hvpipe: Fix & simplify error handling in papr_hvpipe_init()
pseries/papr-hvpipe: Fix null ptr deref in papr_hvpipe_dev_create_handle()
pseries/papr-hvpipe: Prevent kernel stack memory leak to userspace
pseries/papr-hvpipe: Fix race with interrupt handler
powerpc/pseries/htmdump: Add memory configuration dump support to htmdump module
powerpc/pseries/htmdump: Fix the offset value used in htm status dump
powerpc/pseries/htmdump: Fix the offset value used in processor configuration dump
...
