Instead of testing the controller register address to distinguish
controller 1 from controller 0 on i.MX8MQ platforms, use the PCI domain
number, which comes from the devicetree 'linux,pci-domain' property.
All relevant devicetrees should already supply 'linux,pci-domain', which
was added by c0b70f05c8 ("arm64: dts: imx8mq: use_dt_domains for pci
node").
Instead of being set directly in imx_pcie_probe(), pci->dbi_base will be
set by the DWC core in dw_pcie_get_resources().
No functional changes intended.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250226024256.1678103-3-hongxing.zhu@nxp.com
When running the RK3588 in Endpoint mode, with an Intel host with IOMMU
enabled, the host side prints:
DMAR: VT-d detected Invalidation Time-out Error: SID 0
When running the RK3588 in Endpoint mode, with an AMD host with IOMMU
enabled, the host side prints:
iommu ivhd0: AMD-Vi: Event logged [IOTLB_INV_TIMEOUT device=63:00.0 address=0x42b5b01a0]
Rockchip has confirmed that the ATS support for RK3588 only works when
running the PCIe controller in Root Complex (RC) mode, see:
https://lore.kernel.org/linux-pci/93cdce39-1ae6-4939-a3fc-db10be7564e5@rock-chips.com
Usually, to handle these issues, we add a quirk for the PCI vendor and
device ID in drivers/pci/quirks.c with quirk_no_ats(). That is because
we cannot usually modify the capabilities on the EP side. In this case,
we can modify the capabilities on the EP side.
Thus, hide the broken ATS capability on RK3588 when running in EP mode.
That way, we don't need any quirk on the host side, and we see no errors
on the host side, and we can run pci_endpoint_test successfully, with
the IOMMU enabled on the host side.
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
[kwilczynski: commit log, tidy up code comments and error message]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250310094826.842681-6-cassel@kernel.org
Add dw_pcie_ep_hide_ext_capability() which can be used by an endpoint
controller driver to hide a capability.
This can be useful to hide a capability that is buggy, such that the
host side does not try to enable the buggy capability.
Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250310094826.842681-5-cassel@kernel.org
If the bitmap or memory allocations fail, then dw_pcie_ep_init_registers()
will incorrectly return a success.
Return -ENOMEM instead.
Fixes: 869bc52534 ("PCI: dwc: ep: Fix DBI access failure for drivers requiring refclk from host")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/36dcb6fc-f292-4dd5-bd45-a8c6f9dc3df7@stanley.mountain
Convert the code to use the new guard(msi_descs_lock).
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/all/20250313130321.758905320@linutronix.de
The Versal Net ACAP (Adaptive Compute Acceleration Platform) devices
incorporate the Coherency and PCIe Gen5 Module, specifically the
Next-Generation Compact Module (CPM5NC).
The integrated CPM5NC block, along with the built-in bridge, can function
as a PCIe Root Port and supports the PCIe Gen5 protocol with data transfer
rates of up to 32 GT/s, and is capable of supporting up to a x16 lane-width
configuration.
Bridge errors are managed using a specific interrupt line designed for
CPM5N. The INTx interrupt support is not available.
Currently in this commit platform specific bridge errors support is not
added.
Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
[kwilczynski: commit log, squashed patch to fix an if-statement condition
to ensure that xilinx_cpm_pcie_init_port() does not run on the CPM5NC_HOST
variant from https://lore.kernel.org/linux-pci/20250311072402.1049990-1-thippeswamy.havalige@amd.com]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250224155025.782179-4-thippeswamy.havalige@amd.com
The IRQ domain allocated for the PCIe controller is not freed if
resource_list_first_type() returns NULL, leading to a resource leak.
This fix ensures properly cleaning up the allocated IRQ domain in
the error path.
Fixes: 49e427e6bd ("Merge branch 'pci/host-probe-refactor'")
Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
[kwilczynski: added missing Fixes: tag, refactored to use one of the goto labels]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250224155025.782179-2-thippeswamy.havalige@amd.com
Remove the superfluous function dw_pcie_ep_find_ext_capability(),
as it is virtually identical to dw_pcie_find_ext_capability().
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250221202646.395252-3-cassel@kernel.org
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Looking at section "11.4.4.29 USP_PCIE_RESBAR Registers Summary" in the
Technical Reference Manual (TRM) for RK3588, we can see that none of the
BARs are Fixed BARs, but actually Resizable BARs.
I couldn't find any reference in the TRM for RK3568, but looking at the
downstream PCIe endpoint driver, both RK3568 and RK3588 are treated as
the same, so the BARs on RK3568 must also be Resizable BARs.
Now when we actually have support for Resizable BARs, let's configure
these BARs as such.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250131182949.465530-16-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The support for a specific iATU alignment was added in
commit 2a9a801620 ("PCI: endpoint: Add support to specify alignment for
buffers allocated to BARs").
This commit specifically mentions both that the alignment by each DWC
based EP driver should match CX_ATU_MIN_REGION_SIZE, and that AM65x
specifically has a 64 KB alignment.
This also matches the CX_ATU_MIN_REGION_SIZE value specified in the
section "12.2.2.4.7 PCIe Subsystem Address Translation" of the Technical
Reference Manual (TRM) for AM65x:
https://www.ti.com/lit/ug/spruid7e/spruid7e.pdf
This higher value, 1 MB, was obviously an ugly hack used to be able to
handle Resizable BARs which have a minimum size of 1 MB.
Now when we actually have support for Resizable BARs, let's configure the
iATU alignment requirement to the actual requirement.
(BARs described as Resizable will still get aligned to 1 MB.)
Cc: stable+noautosel@kernel.org # Depends on PCI endpoint Resizable BARs series
Fixes: 23284ad677 ("PCI: keystone: Add support for PCIe EP in AM654x Platforms")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250131182949.465530-15-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Looking at section "12.2.2.4.15 PCIe Subsystem BAR Configuration" in the
following Technical Reference Manual (TRM) for AM65x:
https://www.ti.com/lit/ug/spruid7e/spruid7e.pdf
We can see that BAR2 and BAR5 are not Fixed BARs, but actually Resizable
BARs.
Now when we actually have support for Resizable BARs, let's configure
these BARs as such.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250131182949.465530-14-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The DWC databook specifies three different BARn_SIZING_SCHEME_N as:
- Fixed Mask (0)
- Programmable Mask (1)
- Resizable BAR (2)
Each of these sizing schemes have different instructions for how to
initialize the BAR.
The DWC driver currently does not support resizable BARs.
Instead, in order to somewhat support resizable BARs, the DWC EP driver
currently has an ugly hack that force sets a resizable BAR to 1 MB, if
such a BAR is detected.
Additionally, this hack only works if the DWC glue driver also has lied
in their EPC features, and claimed that the resizable BAR is a 1 MB fixed
size BAR.
This is unintuitive (as you somehow need to know that you need to lie in
your EPC features), but other than that it is overly restrictive, since a
resizable BAR is capable of supporting sizes different than 1 MB.
Add proper support for resizable BARs in the DWC EP driver.
Note that the pci_epc_set_bar() API takes a struct pci_epf_bar which tells
the EPC driver how it wants to configure the BAR.
struct pci_epf_bar only has a single size struct member.
This means that an EPC driver will only be able to set a single supported
size. This is perfectly fine, as we do not need the complexity of allowing
a host to change the size of the BAR. If someone ever wants to support
resizing a resizable BAR, the pci_epc_set_bar() API can be extended in the
future.
With these changes, we allow an EPF driver to configure the size of
Resizable BARs, rather than forcing them to a 1 MB size.
This means that an EPC driver does not need to lie in EPC features, and an
EPF driver will be able to set an arbitrary size (not be forced to a 1 MB
size), just like BAR_PROGRAMMABLE.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250131182949.465530-13-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Move dw_pcie_ep_find_ext_capability() so that it is located next to
dw_pcie_ep_find_capability().
Additionally, a follow-up commit requires this to be defined earlier
in order to avoid a forward declaration.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250131182949.465530-12-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Add PCIe Root Port controller support for the Agilex family of chips.
The Agilex PCIe Hard IP has three variants that are mostly software
compatible, except for a couple register offsets. The P-Tile variant
supports Gen3/Gen4 1x16. The F-Tile variant supports Gen3/Gen4 4x4,
4x8, and 4x16. The R-Tile variant improves on the F-Tile variant by
adding Gen5 support.
To simplify the implementation of pci_ops read/write functions,
ep_{read/write}_cfg() callbacks were added to struct altera_pci_ops
to easily distinguish between hardware variants.
Signed-off-by: D M, Sharath Kumar <sharath.kumar.d.m@intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250221170452.875419-3-matthew.gerlach@linux.intel.com
[kwilczynski: tidy code comments]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The for_each_available_child_of_node_scoped() helper provides
a scope-based clean-up functionality to put the device_node
automatically, and as such, there is no need to call of_node_put()
directly.
Thus, use this helper to simplify the code.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240831040413.126417-7-zhangzekun11@huawei.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The for_each_available_child_of_node_scoped() helper provides
a scope-based clean-up functionality to put the device_node
automatically, and as such, there is no need to call of_node_put()
directly.
Thus, use this helper to simplify the code.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240831040413.126417-6-zhangzekun11@huawei.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The for_each_available_child_of_node_scoped() helper provides
a scope-based clean-up functionality to put the device_node
automatically, and as such, there is no need to call of_node_put()
directly.
Thus, use this helper to simplify the code.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240831040413.126417-5-zhangzekun11@huawei.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The for_each_available_child_of_node_scoped() helper provides
a scope-based clean-up functionality to put the device_node
automatically, and as such, there is no need to call of_node_put()
directly.
Thus, use this helper to simplify the code.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240831040413.126417-4-zhangzekun11@huawei.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The combination of dev_err() and the returned error code could be
replaced by dev_err_probe() in driver's probe function.
Thus, convert the code to use dev_err_probe() to make code simpler.
Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240831040413.126417-3-zhangzekun11@huawei.com
[kwilczynski: commit log, return -ETIMEDOUT from hi3660_pcie_phy_start()
rather than -EINVAL for when the PIPE clock fails to become stable,
drop redundant dev->of_node NULL check]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Move PCI_VENDOR_ID_ROCKCHIP from pci_endpoint_test.c to pci_ids.h and
reuse it in pcie-rockchip-host.c.
Link: https://lore.kernel.org/r/20250218092120.2322784-2-cassel@kernel.org
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Add the debugfs property to provide a view of the current link's LTSSM
status from the Root Port device.
Signed-off-by: Hans Zhang <18255117159@163.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Niklas Cassel <cassel@kernel.org>
Tested-by: Hrishikesh Deleep <hrishikesh.d@samsung.com>
Link: https://lore.kernel.org/r/20250223141848.231232-1-18255117159@163.com
[kwilczynski: commit log, refactor dw_ltssm_sts_string() to avoid
compilation errors on platforms that do not set CONFIG_PCIE_DW_HOST]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Add support to provide Statistical Counter interface to userspace.
This set of debug registers are part of the RAS DES feature present in
DesignWare PCIe controllers.
Co-developed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Shradha Todi <shradha.t@samsung.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Hrishikesh Deleep <hrishikesh.d@samsung.com>
Link: https://lore.kernel.org/r/20250221131548.59616-6-shradha.t@samsung.com
[kwilczynski: commit log, tidy up code comments, update documentation,
squashed patch that checks if the event counter is supported from
https://lore.kernel.org/linux-pci/20250225171239.19574-3-manivannan.sadhasivam@linaro.org]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Add support to provide Error Injection interface to userspace.
This set of debug registers are part of the RAS DES feature present in
DesignWare PCIe controllers.
Signed-off-by: Shradha Todi <shradha.t@samsung.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Tested-by: Hrishikesh Deleep <hrishikesh.d@samsung.com>
Link: https://lore.kernel.org/r/20250221131548.59616-5-shradha.t@samsung.com
[kwilczynski: commit log, tidy up code comments, update documentation,
change debugfs property name from "duplicate_dllp" to "duplicate_tlp"]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Add support to provide Silicon Debug interface to userspace.
This set of debug registers are part of the RAS DES feature present in
DesignWare PCIe controllers.
Co-developed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Shradha Todi <shradha.t@samsung.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Tested-by: Hrishikesh Deleep <hrishikesh.d@samsung.com>
Link: https://lore.kernel.org/r/20250221131548.59616-4-shradha.t@samsung.com
[kwilczynski: commit log, tidy up Kconfig and drop "default y", tidy up
code comments, squashed patch that fixes a NULL pointer dereference when
debugfs is already unavailable during clean-up from
https://lore.kernel.org/linux-pci/20250225171239.19574-2-manivannan.sadhasivam@linaro.org,
refactor dwc_pcie_debugfs_init() to not return errors, squashed patch that
changes how lack of the RAS DES capability is handled from
https://lore.kernel.org/linux-pci/20250304151814.6xu7cbpwpqrvcad5@thinkpad]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Fix the following inconsistent indentation warning:
drivers/pci/controller/pcie-mediatek-gen3.c:922 mtk_pcie_parse_port() warn: inconsistent indenting
Found using Smatch. No functional changes intended.
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Link: https://lore.kernel.org/r/20250305070022.4668-1-hanchunchao@inspur.com
[kwilczynski: commit log, refactor if-statement around num_lanes to
make it more readable, wrap overly long lines to fit 80 colums]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The for_each_available_child_of_node_scoped() helper provides
a scope-based clean-up functionality to put the device_node
automatically, and as such, there is no need to call of_node_put()
directly.
Thus, use this helper to simplify the code.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240831040413.126417-2-zhangzekun11@huawei.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Make the cast to the irq_hw_number_t type for the parameter passed to
irq_domain_set_info() function explicit.
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250214173944.47506-9-james.quinlan@broadcom.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The hardware has been updated with two changes to the MDIO packet
format.
The CMD field used to be 12 bits and now is only 1 bit. This change
is backwards compatible because the field's starting bit position is
unchanged, and the only commands we've used have values 0 and 1.
The PORT field's width has been changed from 4 bits to 5 bits. When
written, the new bit is not contiguous with the other four. However,
this change is backwards compatible because the driver never used
anything other than 0 for the port field's value.
Thus, update the existing code to handle new changes to the hardware
in a backwards-compatible manner.
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250214173944.47506-8-james.quinlan@broadcom.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The constants EXT_CFG_DATA and EXT_CFG_INDEX vary by SoC, where one of
the map_bus methods used these constants, and the other used a different
set of constants.
Thankfully, there was no problem because the SoCs that used the latter
map_bus method all had the same register constants.
Thus, remove redundant constants and adjust the code to use the correct
constants accordingly.
While at it, update the value of EXT_CFG_DATA to use the 4k-page based
configuration space access system, which is what the second map_bus
method was already using.
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20250214173944.47506-7-james.quinlan@broadcom.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The platform supports enabling and disabling regulators only on
ports below the Root Complex.
Thus, we need to verify this both when adding and removing the bus,
otherwise regulators may be disabled prematurely when a bus further
down the topology is removed.
Fixes: 9e6be018b2 ("PCI: brcmstb: Enable child bus device regulators from DT")
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250214173944.47506-6-james.quinlan@broadcom.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
If the regulator_bulk_get() returns an error and no regulators
are created, we need to set their number to zero.
If we don't do this and the PCIe link up fails, a call to the
regulator_bulk_free() will result in a kernel panic.
While at it, print the error value, as we cannot return an error
upwards as the kernel will WARN() on an error from add_bus().
Fixes: 9e6be018b2 ("PCI: brcmstb: Enable child bus device regulators from DT")
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20250214173944.47506-5-james.quinlan@broadcom.com
[kwilczynski: commit log, use comma in the message to match style with
other similar messages]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
When setting the LNKCAP and LNKCTL2 register fields, it was assumed
that the field started at the LSB of the register.
Although the masks do indeed start at the LSB, and this will probably
not change, it is prudent to use a method that makes no assumption
about the mask's placement in the register.
Thus, use the u{16,32}p_replace_bits() helpers since they are already
wildly used in this driver.
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250214173944.47506-4-james.quinlan@broadcom.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The driver has been mistakenly writing to a read-only (RO)
configuration space register (PCI_EXP_LNKCAP) to change the
PCIe link capability.
Although harmless in this case, the proper write destination
is an internal register that is reflected by PCI_EXP_LNKCAP.
Thus, fix the brcm_pcie_set_gen() function to correctly update
the link capability.
Fixes: c045213703 ("PCI: brcmstb: Add Broadcom STB PCIe host controller driver")
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250214173944.47506-3-james.quinlan@broadcom.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
When the user elects to limit the PCIe generation via the appropriate
devicetree property, apply the settings before the PCIe link up, not
after.
Fixes: c045213703 ("PCI: brcmstb: Add Broadcom STB PCIe host controller driver")
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250214173944.47506-2-james.quinlan@broadcom.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Add a bare minimum amount of changes in order to support PCIe Root
Complex hardware IP found on RPi5. The PCIe controller on BCM2712
is based on BCM7712 and as such it inherits register offsets, PERST#
assertion, bridge_reset ops, and inbound windows count.
Although, the implementation for BCM2712 needs a workaround related to
the control of the bridge_reset where turning off of the Root Port must
not shutdown the bridge_reset and this must be avoided. To implement
this workaround a quirks field is introduced in pcie_cfg_data struct.
The controller also needs adjustment of PHY PLL setup to use a 54MHz
input refclk. The default input reference clock for the PHY PLL is
100Mhz, except for some devices where it is 54Mhz like BCM2712C1 and
BCM2712D0.
To implement those adjustments introduce a new .post_setup op in
pcie_cfg_data and call it at the end of brcm_pcie_setup function.
The BCM2712 .post_setup callback implements the required MDIO writes
that switch the PLL refclk and also change PHY PM clock period.
Without this RPi5 PCIex1 is unable to enumerate endpoint devices on
the expansion connector.
Signed-off-by: Stanimir Varbanov <svarbanov@suse.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Jim Quinlan <james.quinlan@broadcom.com>
Tested-by: Ivan T. Ivanov <iivanov@suse.de>
Link: https://lore.kernel.org/r/20250224083559.47645-8-svarbanov@suse.de
[commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Per the Cadence's "PCIe Controller IP for AX14" user guide, Version
1.04, Section 9.1.7.1, "AXI Subordinate to PCIe Address Translation
Registers", Table 9.4, the bit 16 of the AXI Subordinate Address
(axi_s_awaddr) when set corresponds to MSG with data, and when not set,
to MSG without data.
However, the driver is currently doing the opposite and due to this,
the INTx is never received on the host.
So, fix the driver to reflect the documentation and also make INTx work.
Fixes: 37dddf14f1 ("PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller")
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Hans Zhang <hans.zhang@cixtech.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250214165724.184599-1-18255117159@163.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The new dw_pcie_find_vsec_capability() helper will be used within
different DWC APIs to find the VSEC capabilities like PTM, RAS, etc.
Co-developed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Shradha Todi <shradha.t@samsung.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Tested-by: Hrishikesh Deleep <hrishikesh.d@samsung.com>
Link: https://lore.kernel.org/r/20250221131548.59616-3-shradha.t@samsung.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Configure PBus base address and address mask to allow the hw
to detect if a given address is accessible on PCIe controller.
Fixes: f6ab898356 ("PCI: mediatek-gen3: Add Airoha EN7581 support")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/20250225-en7581-pcie-pbus-csr-v4-2-24324382424a@kernel.org
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The BCM2712 memory map can support up to 64GB of system memory, thus
expand the inbound window size in calculation helper function.
The change is safe for the currently supported SoCs that have smaller
inbound window sizes.
Signed-off-by: Stanimir Varbanov <svarbanov@suse.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Jim Quinlan <james.quinlan@broadcom.com>
Tested-by: Ivan T. Ivanov <iivanov@suse.de>
Link: https://lore.kernel.org/r/20250224083559.47645-7-svarbanov@suse.de
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Instead of copying fields from the pcie_cfg_data structure to
brcm_pcie, reference it directly.
Signed-off-by: Stanimir Varbanov <svarbanov@suse.de>
Reviewed-by: Florian Fainelil <florian.fainelli@broadcom.com>
Reviewed-by: Jim Quinlan <james.quinlan@broadcom.com>
Tested-by: Ivan T. Ivanov <iivanov@suse.de>
Link: https://lore.kernel.org/r/20250224083559.47645-6-svarbanov@suse.de
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Then the brcmstb PCIe driver and MIP MSI-X interrupt controller
drivers are built as modules there could be a race in probing.
To avoid this, add a softdep to MIP driver to guarantee that
MIP driver will be load first.
Signed-off-by: Stanimir Varbanov <svarbanov@suse.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Ivan T. Ivanov <iivanov@suse.de>
Link: https://lore.kernel.org/r/20250224083559.47645-5-svarbanov@suse.de
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Calling cpumask_next_wrap_old() with starting CPU == nr_cpu_ids
is effectively the same as request to find first CPU, starting
from a given one and wrapping around if needed.
cpumask_next_wrap() is a proper replacement for that.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
The next patch aligns implementation of cpumask_next_wrap() with the
find_next_bit_wrap(), and it changes function signature.
To make the transition smooth, this patch deprecates current
implementation by adding an _old suffix. The following patches switch
current users to the new implementation one by one.
No functional changes were intended.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Enable PCIe Endpoint mode support for the Qualcomm SAR2130P platform.
This is needed, as it is not possible to use a compatible fallback on
any other platform since SAR2130P uses slightly different set of clocks.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250221-sar2130p-pci-v3-6-61a0fdfb75b4@linaro.org
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
A call to of_parse_phandle() is incrementing the refcount, and as such,
the of_node_put() must be called when the reference is no longer needed.
Thus, refactor the existing code and add a missing of_node_put() call
following the check to ensure that "msi_np" matches "pcie->np" and after
MSI initialization, but only if the MSI support is enabled system-wide.
Cc: stable@vger.kernel.org # v5.10+
Fixes: 40ca1bf580 ("PCI: brcmstb: Add MSI support")
Signed-off-by: Stanimir Varbanov <svarbanov@suse.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250122222955.1752778-1-svarbanov@suse.de
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
On all Qcom endpoint SoCs, BAR0/BAR2 are 64bit BARs by default and
software cannot change the type.
So, mark the those BARs as 64bit BARs and also mark the successive
BAR1/BAR3 as RESERVED BARs so that the EPF drivers cannot use them.
Cc: stable+noautosel@kernel.org # depends on patch introducing only_64bit flag
Fixes: f55fee56a6 ("PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20241231130224.38206-3-manivannan.sadhasivam@linaro.org
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Remove a leftover assert for mac_reset line in mtk_pcie_en7581_power_up().
This is not harmful since EN7581 does not requires mac_reset and
mac_reset is not defined in EN7581 device tree.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20250201-pcie-en7581-remove-mac_reset-v2-1-a06786cdc683@kernel.org
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The VF driver controls an endpoint attached to the PCI HyperV
controller. An invalidation sent by the PF driver in the host
would be delivered *to* the endpoint driver by the controller
driver.
Thus, correct the wording within the comment.
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250207190716.89995-1-eahariha@linux.microsoft.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
-----BEGIN PGP SIGNATURE-----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=O62O
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Batch sizing of multiple BARs while memory decoding is disabled
instead of disabling/enabling decoding for each BAR individually;
this optimizes virtualized environments where toggling decoding
enable is expensive (Alex Williamson)
- Add host bridge .enable_device() and .disable_device() hooks for
bridges that need to configure things like Requester ID to StreamID
mapping when enabling devices (Frank Li)
- Extend struct pci_ecam_ops with .enable_device() and
.disable_device() hooks so drivers that use pci_host_common_probe()
instead of their own .probe() have a way to set the
.enable_device() callbacks (Marc Zyngier)
- Drop 'No bus range found' message so we don't complain when DTs
don't specify the default 'bus-range = <0x00 0xff>' (Bjorn Helgaas)
- Rename the drivers/pci/of_property.c struct of_pci_range to
of_pci_range_entry to avoid confusion with the global of_pci_range
in include/linux/of_address.h (Bjorn Helgaas)
Driver binding:
- Update resource request API documentation to encourage callers to
supply a driver name when requesting resources (Philipp Stanner)
- Export pci_intx_unmanaged() and pcim_intx() (always managed) so
callers of pci_intx() (which is sometimes managed) can explicitly
choose the one they need (Philipp Stanner)
- Convert drivers from pci_intx() to always-managed pcim_intx() or
never-managed pci_intx_unmanaged(): amd_sfh, ata (ahci, ata_piix,
pata_rdc, sata_sil24, sata_sis, sata_uli, sata_vsc), bnx2x, bna,
ntb, qtnfmac, rtsx, tifm_7xx1, vfio, xen-pciback (Philipp Stanner)
- Remove pci_intx_unmanaged() since pci_intx() is now always
unmanaged and pcim_intx() is always managed (Philipp Stanner)
Error handling:
- Unexport pcie_read_tlp_log() to encourage drivers to use PCI core
logging rather than building their own (Ilpo Järvinen)
- Move TLP Log handling to its own file (Ilpo Järvinen)
- Store number of supported End-End TLP Prefixes always so we can
read the correct number of DWORDs from the TLP Prefix Log (Ilpo
Järvinen)
- Read TLP Prefixes in addition to the Header Log in
pcie_read_tlp_log() (Ilpo Järvinen)
- Add pcie_print_tlp_log() to consolidate printing of TLP Header and
Prefix Log (Ilpo Järvinen)
- Quirk the Intel Raptor Lake-P PIO log size to accommodate vendor
BIOSes that don't configure it correctly (Takashi Iwai)
ASPM:
- Save parent L1 PM Substates config so when we restore it along with
an endpoint's config, the parent info isn't junk (Jian-Hong Pan)
Power management:
- Avoid D3 for Root Ports on TUXEDO Sirius Gen1 with old BIOS because
the system can't wake up from suspend (Werner Sembach)
Endpoint framework:
- Destroy the EPC device in devm_pci_epc_destroy(), which previously
didn't call devres_release() (Zijun Hu)
- Finish virtual EP removal in pci_epf_remove_vepf(), which
previously caused a subsequent pci_epf_add_vepf() to fail with
-EBUSY (Zijun Hu)
- Write BAR_MASK before iATU registers in pci_epc_set_bar() so we
don't depend on the BAR_MASK reset value being larger than the
requested BAR size (Niklas Cassel)
- Prevent changing BAR size/flags in pci_epc_set_bar() to prevent
reads from bypassing the iATU if we reduced the BAR size (Niklas
Cassel)
- Verify address alignment when programming iATU so we don't attempt
to write bits that are read-only because of the BAR size, which
could lead to directing accesses to the wrong address (Niklas
Cassel)
- Implement artpec6 pci_epc_features so we can rely on all drivers
supporting it so we can use it in EPC core code (Niklas Cassel)
- Check for BARs of fixed size to prevent endpoint drivers from
trying to change their size (Niklas Cassel)
- Verify that requested BAR size is a power of two when endpoint
driver sets the BAR (Niklas Cassel)
Endpoint framework tests:
- Clear pci-epf-test dma_chan_rx, not dma_chan_tx, after freeing
dma_chan_rx (Mohamed Khalfella)
- Correct the DMA MEMCPY test so it doesn't fail if the Endpoint
supports both DMA_PRIVATE and DMA_MEMCPY (Manivannan Sadhasivam)
- Add pci-epf-test and pci_endpoint_test support for capabilities
(Niklas Cassel)
- Add Endpoint test for consecutive BARs (Niklas Cassel)
- Remove redundant comparison from Endpoint BAR test because a > 1MB
BAR can always be exactly covered by iterating with a 1MB buffer
(Hans Zhang)
- Move and convert PCI Endpoint tests from tools/pci to Kselftests
(Manivannan Sadhasivam)
Apple PCIe controller driver:
- Convert StreamID mapping configuration from a bus notifier to the
.enable_device() and .disable_device() callbacks (Marc Zyngier)
Freescale i.MX6 PCIe controller driver:
- Add Requester ID to StreamID mapping configuration when enabling
devices (Frank Li)
- Use DWC core suspend/resume functions for imx6 (Frank Li)
- Add suspend/resume support for i.MX8MQ, i.MX8Q, and i.MX95 (Richard
Zhu)
- Add DT compatible string 'fsl,imx8q-pcie-ep' and driver support for
i.MX8Q series (i.MX8QM, i.MX8QXP, and i.MX8DXL) Endpoints (Frank
Li)
- Add DT binding for optional i.MX95 Refclk and driver support to
enable it if the platform hasn't enabled it (Richard Zhu)
- Configure PHY based on controller being in Root Complex or Endpoint
mode (Frank Li)
- Rely on dbi2 and iATU base addresses from DT via
dw_pcie_get_resources() instead of hardcoding them (Richard Zhu)
- Deassert apps_reset in imx_pcie_deassert_core_reset() since it is
asserted in imx_pcie_assert_core_reset() (Richard Zhu)
- Add missing reference clock enable or disable logic for IMX6SX,
IMX7D, IMX8MM (Richard Zhu)
- Remove redundant imx7d_pcie_init_phy() since
imx7d_pcie_enable_ref_clk() does the same thing (Richard Zhu)
Freescale Layerscape PCIe controller driver:
- Simplify by using syscon_regmap_lookup_by_phandle_args() instead
of syscon_regmap_lookup_by_phandle() followed by
of_property_read_u32_array() (Krzysztof Kozlowski)
Marvell MVEBU PCIe controller driver:
- Add MODULE_DEVICE_TABLE() to enable module autoloading (Liao Chen)
MediaTek PCIe Gen3 controller driver:
- Use clk_bulk_prepare_enable() instead of separate
clk_bulk_prepare() and clk_bulk_enable() (Lorenzo Bianconi)
- Rearrange reset assert/deassert so they're both done in the
*_power_up() callbacks (Lorenzo Bianconi)
- Document that Airoha EN7581 requires PHY init and power-on before
PHY reset deassert, unlike other MediaTek Gen3 controllers (Lorenzo
Bianconi)
- Move Airoha EN7581 post-reset delay from the en7581 clock .enable()
method to mtk_pcie_en7581_power_up() (Lorenzo Bianconi)
- Sleep instead of delay during Airoha EN7581 power-up, since this is
a non-atomic context (Lorenzo Bianconi)
- Skip PERST# assertion on Airoha EN7581 during probe and
suspend/resume to avoid a hardware defect (Lorenzo Bianconi)
- Enable async probe to reduce system startup time (Douglas Anderson)
Microchip PolarFlare PCIe controller driver:
- Set up the inbound address translation based on whether the
platform allows coherent or non-coherent DMA (Daire McNamara)
- Update DT binding such that platforms are DMA-coherent by default
and must specify 'dma-noncoherent' if needed (Conor Dooley)
Mobiveil PCIe controller driver:
- Convert mobiveil-pcie.txt to YAML and update 'interrupt-names'
and 'reg-names' (Frank Li)
Qualcomm PCIe controller driver:
- Add DT SM8550 and SM8650 optional 'global' interrupt for link
events (Neil Armstrong)
- Add DT 'compatible' strings for IPQ5424 PCIe controller (Manikanta
Mylavarapu)
- If 'global' IRQ is supported for detection of Link Up events, tell
DWC core not to wait for link up (Krishna chaitanya chundru)
Renesas R-Car PCIe controller driver:
- Avoid passing stack buffer as resource name (King Dix)
Rockchip PCIe controller driver:
- Simplify clock and reset handling by using bulk interfaces (Anand
Moon)
- Pass typed rockchip_pcie (not void) pointer to
rockchip_pcie_disable_clocks() (Anand Moon)
- Return -ENOMEM, not success, when pci_epc_mem_alloc_addr() fails
(Dan Carpenter)
Rockchip DesignWare PCIe controller driver:
- Use dll_link_up IRQ to detect Link Up and enumerate devices so
users don't have to manually rescan (Niklas Cassel)
- Tell DWC core not to wait for link up since the 'sys' interrupt is
required and detects Link Up events (Niklas Cassel)
Synopsys DesignWare PCIe controller driver:
- Don't wait for link up in DWC core if driver can detect Link Up
event (Krishna chaitanya chundru)
- Update ICC and OPP votes after Link Up events (Krishna chaitanya
chundru)
- Always stop link in dw_pcie_suspend_noirq(), which is required at
least for i.MX8QM to re-establish link on resume (Richard Zhu)
- Drop racy and unnecessary LTSSM state check before sending
PME_TURN_OFF message in dw_pcie_suspend_noirq() (Richard Zhu)
- Add struct of_pci_range.parent_bus_addr for devices that need their
immediate parent bus address, not the CPU address, e.g., to program
an internal Address Translation Unit (iATU) (Frank Li)
TI DRA7xx PCIe controller driver:
- Simplify by using syscon_regmap_lookup_by_phandle_args() instead of
syscon_regmap_lookup_by_phandle() followed by
of_parse_phandle_with_fixed_args() or of_property_read_u32_index()
(Krzysztof Kozlowski)
Xilinx Versal CPM PCIe controller driver:
- Add DT binding and driver support for Xilinx Versal CPM5
(Thippeswamy Havalige)
MicroSemi Switchtec management driver:
- Add Microchip PCI100X device IDs (Rakesh Babu Saladi)
Miscellaneous:
- Move reset related sysfs code from pci.c to pci-sysfs.c where other
similar code lives (Ilpo Järvinen)
- Simplify reset_method_store() memory management by using __free()
instead of explicit kfree() cleanup (Ilpo Järvinen)
- Constify struct bin_attribute for sysfs, VPD, P2PDMA, and the IBM
ACPI hotplug driver (Thomas Weißschuh)
- Remove redundant PCI_VSEC_HDR and PCI_VSEC_HDR_LEN_SHIFT (Dongdong
Zhang)
- Correct documentation of the 'config_acs=' kernel parameter
(Akihiko Odaki)"
* tag 'pci-v6.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (111 commits)
PCI: Batch BAR sizing operations
dt-bindings: PCI: microchip,pcie-host: Allow dma-noncoherent
PCI: microchip: Set inbound address translation for coherent or non-coherent mode
Documentation: Fix pci=config_acs= example
PCI: Remove redundant PCI_VSEC_HDR and PCI_VSEC_HDR_LEN_SHIFT
PCI: Don't include 'pm_wakeup.h' directly
selftests: pci_endpoint: Migrate to Kselftest framework
selftests: Move PCI Endpoint tests from tools/pci to Kselftests
misc: pci_endpoint_test: Fix IOCTL return value
dt-bindings: PCI: qcom: Document the IPQ5424 PCIe controller
dt-bindings: PCI: qcom,pcie-sm8550: Document 'global' interrupt
dt-bindings: PCI: mobiveil: Convert mobiveil-pcie.txt to YAML
PCI: switchtec: Add Microchip PCI100X device IDs
misc: pci_endpoint_test: Remove redundant 'remainder' test
misc: pci_endpoint_test: Add consecutive BAR test
misc: pci_endpoint_test: Add support for capabilities
PCI: endpoint: pci-epf-test: Add support for capabilities
PCI: endpoint: pci-epf-test: Fix check for DMA MEMCPY test
PCI: endpoint: pci-epf-test: Set dma_chan_rx pointer to NULL on error
PCI: dwc: Simplify config resource lookup
...
- Add DT binding and driver support for Xilinx Versal CPM5 (Thippeswamy
Havalige)
* pci/controller/xilinx-cpm:
PCI: xilinx-cpm: Add support for Versal CPM5 Root Port Controller 1
dt-bindings: PCI: xilinx-cpm: Add compatible string for CPM5 host1
- Set up the inbound address translation based on whether the platform
allows coherent or non-coherent DMA (Daire McNamara)
- Update DT binding such that platforms are DMA-coherent by default and
must specify 'dma-noncoherent' if needed (Conor Dooley)
* pci/controller/microchip:
dt-bindings: PCI: microchip,pcie-host: Allow dma-noncoherent
PCI: microchip: Set inbound address translation for coherent or non-coherent mode
- Use clk_bulk_prepare_enable() instead of separate clk_bulk_prepare() and
clk_bulk_enable() (Lorenzo Bianconi)
- Rearrange reset assert/deassert so they're both done in the *_power_up()
callbacks (Lorenzo Bianconi)
- Document that Airoha EN7581 requires PHY init and power-on before PHY
reset deassert, unlike other MediaTek Gen3 controllers (Lorenzo Bianconi)
- Move Airoha EN7581 post-reset delay from the en7581 clock .enable()
method to mtk_pcie_en7581_power_up() (Lorenzo Bianconi)
- Sleep instead of delay during Airoha EN7581 power-up, since this is a
non-atomic context (Lorenzo Bianconi)
- Skip PERST# assertion on Airoha EN7581 during probe and suspend/resume to
avoid a hardware defect (Lorenzo Bianconi)
- Enable async probe to reduce system startup time (Douglas Anderson)
* pci/controller/mediatek:
PCI: mediatek-gen3: Enable async probe by default
PCI: mediatek-gen3: Avoid PCIe resetting via PERST# for Airoha EN7581 SoC
PCI: mediatek-gen3: Rely on msleep() in mtk_pcie_en7581_power_up()
PCI: mediatek-gen3: Move reset delay in mtk_pcie_en7581_power_up()
PCI: mediatek-gen3: Add comment about initialization order in mtk_pcie_en7581_power_up()
PCI: mediatek-gen3: Move reset/assert callbacks in .power_up()
PCI: mediatek-gen3: Rely on clk_bulk_prepare_enable() in mtk_pcie_en7581_power_up()
- Simplify by using syscon_regmap_lookup_by_phandle_args() instead of
syscon_regmap_lookup_by_phandle() followed by
of_property_read_u32_array() (Krzysztof Kozlowski)
* pci/controller/layerscape:
PCI: layerscape: Use syscon_regmap_lookup_by_phandle_args
- Add DT compatible string 'fsl,imx8q-pcie-ep' and driver support for
i.MX8Q series (i.MX8QM, i.MX8QXP, and i.MX8DXL) Endpoints (Frank Li)
- Add DT binding for optional i.MX95 Refclk and driver support to enable it
if the platform hasn't enabled it (Richard Zhu)
- Configure PHY based on controller being in Root Complex or Endpoint mode
(Frank Li)
- Rely on dbi2 and iATU base addresses from DT via dw_pcie_get_resources()
instead of hardcoding them in imx6 (Richard Zhu)
- Skip controller_id computation for i.MX7D since it only has one
controller (Richard Zhu)
- Deassert apps_reset in imx_pcie_deassert_core_reset() since it is
asserted in imx_pcie_assert_core_reset() (Richard Zhu)
- Add missing reference clock enable or disable logic for IMX6SX, IMX7D,
IMX8MM (Richard Zhu)
- Remove redundant imx7d_pcie_init_phy() since imx7d_pcie_enable_ref_clk()
does the same thing (Richard Zhu)
* pci/controller/imx6:
PCI: imx6: Clean up comments and whitespace
PCI: imx6: Remove surplus imx7d_pcie_init_phy() function
PCI: imx6: Add missing reference clock disable logic
PCI: imx6: Deassert apps_reset in imx_pcie_deassert_core_reset()
PCI: imx6: Skip controller_id generation logic for i.MX7D
PCI: imx6: Fetch dbi2 and iATU base addesses from DT
PCI: imx6: Configure PHY based on Root Complex or Endpoint mode
PCI: imx6: Add Refclk for i.MX95 PCIe
dt-bindings: PCI: fsl,imx6q-pcie: Add Refclk for i.MX95 RC
PCI: imx6: Add i.MX8Q PCIe Endpoint (EP) support
dt-bindings: PCI: fsl,imx6q-pcie-ep: Add compatible string fsl,imx8q-pcie-ep
# Conflicts:
# drivers/pci/controller/dwc/pci-imx6.c
- Fix potential string truncation in dw_pcie_edma_irq_verify() (Niklas
Cassel)
- Don't wait for link up in DWC core if driver can detect Link Up event
(Krishna chaitanya chundru)
- If qcom 'global' IRQ is supported for detection of Link Up events, tell
DWC core not to wait for link up (Krishna chaitanya chundru)
- Update ICC and OPP votes after Link Up events (Krishna chaitanya chundru)
- Use dw-rockchip dll_link_up IRQ to detect Link Up and enumerate devices
so users don't have to manually rescan (Niklas Cassel)
- In dw-rockchip, the 'sys' interrupt is required and detects Link Up
events, so tell DWC core not to wait for link up (Niklas Cassel)
- Always stop link in dw_pcie_suspend_noirq(), which is required at least
for i.MX8QM to re-establish link on resume (Richard Zhu)
- Drop racy and unnecessary LTSSM state check before sending PME_TURN_OFF
message in dw_pcie_suspend_noirq() (Richard Zhu)
- Add stubs for dw_pcie_suspend_noirq() dw_pcie_resume_noirq() when
CONFIG_PCIE_DW_HOST is not defined so drivers don't need #ifdefs (Bjorn
Helgaas)
- Use DWC core suspend/resume functions for imx6 (Frank Li)
- Add imx6 suspend/resume support for i.MX8MQ, i.MX8Q, and i.MX95 (Richard
Zhu)
- Add struct of_pci_range.parent_bus_addr for devices that need their
immediate parent bus address, not the CPU address, e.g., to program an
internal Address Translation Unit (iATU) (Frank Li)
* pci/controller/dwc:
PCI: dwc: Simplify config resource lookup
of: address: Add parent_bus_addr to struct of_pci_range
PCI: imx6: Add i.MX8MQ, i.MX8Q and i.MX95 PM support
PCI: imx6: Use DWC common suspend resume method
PCI: dwc: Add dw_pcie_suspend_noirq(), dw_pcie_resume_noirq() stubs for !CONFIG_PCIE_DW_HOST
PCI: dwc: Remove LTSSM state test in dw_pcie_suspend_noirq()
PCI: dwc: Always stop link in the dw_pcie_suspend_noirq
PCI: dw-rockchip: Don't wait for link since we can detect Link Up
PCI: dw-rockchip: Enumerate endpoints based on dll_link_up IRQ
PCI: qcom: Update ICC and OPP values after Link Up event
PCI: qcom: Don't wait for link if we can detect Link Up
PCI: dwc: Don't wait for link up if driver can detect Link Up event
PCI: dwc: Fix potential truncation in dw_pcie_edma_irq_verify()
# Conflicts:
# drivers/pci/controller/dwc/pci-imx6.c
- Simplify by using syscon_regmap_lookup_by_phandle_args() instead of
syscon_regmap_lookup_by_phandle() followed by
of_parse_phandle_with_fixed_args() or of_property_read_u32_index()
(Krzysztof Kozlowski)
* pci/controller/dra7xx:
PCI: dra7xx: Use syscon_regmap_lookup_by_phandle_args
- Add host bridge .enable_device() and .disable_device() hooks for bridges
that need to configure things like Requester ID to StreamID mapping when
enabling devices (Frank Li)
- Add imx6 Requester ID to StreamID mapping configuration when enabling
devices (Frank Li)
- Extend struct pci_ecam_ops with .enable_device() and .disable_device()
hooks so drivers that use pci_host_common_probe() instead of their own
.probe() have a way to set the .enable_device() callbacks (Marc Zyngier)
- Convert pcie-apple StreamID mapping configuration from a bus notifier to
the .enable_device() and .disable_device() callbacks (Marc Zyngier)
* pci/controller/iommu-map:
PCI: apple: Convert to {en,dis}able_device() callbacks
PCI: host-generic: Allow {en,dis}able_device() to be provided via pci_ecam_ops
PCI: imx6: Add IOMMU and ITS MSI support for i.MX95
PCI: Add enable_device() and disable_device() callbacks for bridges
drivers, per usual, and then a handful of drivers for other SoCs. Then the
usual pile of cleanups is fairly small data fixes or converting DT bindings to
YAML so they can be validated. No changes to the core framework besides an OF
node refcount bump that never got decremented.
New Drivers:
- 5L35023 variant of Versa 3 clock generator
- Various Qualcomm clk controllers: IPQ CMN PLL, SM6115 LPASS, SM750 global,
tcsr, rpmh, and display. X Plus GPU and global. QCS615 rpmh and MSM8937 and
MSM8940 RPM.
- Qualcomm Pongo and Taycan Alpha PLLs
- Qualcomm IPQ5424 NoC-related interconnect clks
- Renesas RZ/G3E (R9A09G047) SoC clk driver
- SAMA7D65 SoC clk driver
- Samsung Exynos990 SoC clk driver
-----BEGIN PGP SIGNATURE-----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=wK9g
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"A pretty quiet cycle this time around. We have a bunch of new Qualcomm
clk drivers, per usual, and then a handful of drivers for other SoCs.
Then the usual pile of cleanups is fairly small data fixes or
converting DT bindings to YAML so they can be validated.
No changes to the core framework besides an OF node refcount bump that
never got decremented.
New Drivers:
- 5L35023 variant of Versa 3 clock generator
- Various Qualcomm clk controllers: IPQ CMN PLL, SM6115 LPASS, SM750
global, tcsr, rpmh, and display. X Plus GPU and global. QCS615 rpmh
and MSM8937 and MSM8940 RPM.
- Qualcomm Pongo and Taycan Alpha PLLs
- Qualcomm IPQ5424 NoC-related interconnect clks
- Renesas RZ/G3E (R9A09G047) SoC clk driver
- SAMA7D65 SoC clk driver
- Samsung Exynos990 SoC clk driver"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (159 commits)
clk: analogbits: Fix incorrect calculation of vco rate delta
clk: bcm: rpi: Add disp clock
clk: bcm: rpi: Create helper to retrieve private data
clk: bcm: rpi: Enable minimize for all firmware clocks
clk: bcm: rpi: Allow cpufreq driver to also adjust gpu clocks
clk: bcm: rpi: Add ISP to exported clocks
clk: stm32f4: support spread spectrum clock generation
clk: stm32f4: use FIELD helpers to access the PLLCFGR fields
dt-bindings: clock: st,stm32-rcc: support spread spectrum clocking
dt-bindings: clock: convert stm32 rcc bindings to json-schema
clk: Use str_enable_disable-like helpers
clk: clk-loongson2: Fix the number count of clk provider
clk: clk-loongson2: Switch to use devm_clk_hw_register_fixed_rate_parent_data()
clk: starfive: Make _clk_get become a common helper function
clk: en7523: Add clock for eMMC for EN7581
dt-bindings: clock: add ID for eMMC for EN7581
dt-bindings: clock: drop NUM_CLOCKS define for EN7581
clk: en7523: Rework clock handling for different clock numbers
clk: thead: Fix cpu2vp_clk for TH1520 AP_SUBSYS clocks
clk: thead: Add CLK_IGNORE_UNUSED to fix TH1520 boot
...
On Microchip PolarFire SoC the PCIe Root Port can be behind one of three
general purpose Fabric Interface Controller (FIC) buses that encapsulates
an AXI-S bus. Depending on which FIC(s) the Root Port is connected through
to CPU space, and what address translation is done by that FIC, the Root
Port driver's inbound address translation may vary.
For all current supported designs and all future expected designs, inbound
address translation done by a FIC on PolarFire SoC varies depending on
whether PolarFire SoC is operating in coherent DMA mode or noncoherent DMA
mode.
The setup of the outbound address translation tables in the Root Port
driver only needs to handle these two cases.
Setup the inbound address translation tables to one of two address
translations, depending on whether the Root Port is being used with
coherent DMA or noncoherent DMA.
Link: https://lore.kernel.org/r/20241011140043.1250030-3-daire.mcnamara@microchip.com
Fixes: 6f15a9c9f9 ("PCI: microchip: Add Microchip PolarFire PCIe controller driver")
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
[bhelgaas: adapt for ac7f53b7e7 ("PCI: microchip: Add support for using
either Root Port 1 or 2")]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
If platform_get_resource_byname("config") fails, return error immediately
and unindent the normal path. No functional change intended.
Link: https://lore.kernel.org/r/20250117235119.712043-1-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Call common DWC suspend/resume function. Use DWC common iATU method to
send out PME_TURN_OFF message.
In old DWC implementations, PCIE_ATU_INHIBIT_PAYLOAD in iATU Ctrl2 register
is reserved, so the generic DWC implementation of sending the PME_Turn_Off
message using a dummy MMIO write cannot be used. Use the previous method to
kick off PME_TURN_OFF message for these platforms.
The System Reset Control (SRC) interface is used to toggle 'turnoff_reset'
to send PME_TURN_OFF and since the DWC implementation is used, it is not
needed now.
Replace the imx_pcie_stop_link() and imx_pcie_host_exit() by
dw_pcie_suspend_noirq() in imx_pcie_suspend_noirq().
Since dw_pcie_suspend_noirq() already does these, see below call stack:
dw_pcie_suspend_noirq()
dw_pcie_stop_link()
imx_pcie_stop_link()
pci->pp.ops->deinit()
imx_pcie_host_exit()
Replace the imx_pcie_host_init(), dw_pcie_setup_rc() and
imx_pcie_start_link() by dw_pcie_resume_noirq() in imx_pcie_resume_noirq().
Since dw_pcie_resume_noirq() already does these, see below call stack:
dw_pcie_resume_noirq()
pci->pp.ops->init()
imx_pcie_host_init()
dw_pcie_setup_rc()
dw_pcie_start_link()
imx_pcie_start_link(;
Link: https://lore.kernel.org/r/20241126075702.4099164-9-hongxing.zhu@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Previously pcie-designware.h declared dw_pcie_suspend_noirq() and
dw_pcie_resume_noirq() unconditionally, even though they were only
implemented when CONFIG_PCIE_DW_HOST was defined.
Add no-op stubs for them when CONFIG_PCIE_DW_HOST is not defined so
drivers that support both Root Complex and Endpoint modes don't need
Link: https://lore.kernel.org/r/20250117213810.GA656803@bhelgaas
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
It's safe to send PME_TURN_OFF message regardless of whether the link is up
or down, so don't test the LTSSM state before sending the PME_TURN_OFF
message.
Only print an error message when the LTSSM is not in DETECT or POLL. There
shouldn't be an error when no Endpoint is connected at all.
Link: https://lore.kernel.org/r/20241210081557.163555-3-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
On the i.MX8QM, PCIe link can't be re-established again in
dw_pcie_resume_noirq(), if the LTSSM_EN bit is not cleared
properly in dw_pcie_suspend_noirq().
So, add dw_pcie_stop_link() to dw_pcie_suspend_noirq() to fix
this issue and to align the suspend/resume functions since there
is dw_pcie_start_link() in dw_pcie_resume_noirq() already.
Fixes: 4774faf854 ("PCI: dwc: Implement generic suspend/resume functionality")
Link: https://lore.kernel.org/r/20241210081557.163555-2-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The Root Complex specific device tree binding for pcie-dw-rockchip has the
'sys' interrupt marked as required.
The driver requests the 'sys' IRQ unconditionally, and errors out if not
provided.
Thus, we can unconditionally set 'use_linkup_irq', so dw_pcie_host_init()
doesn't wait for the link to come up.
This will skip the wait for link up (since the bus will be enumerated once
the link up IRQ is triggered), which reduces the bootup time.
Link: https://lore.kernel.org/r/20250113-rockchip-no-wait-v1-1-25417f37b92f@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Most boards using the pcie-dw-rockchip PCIe controller lack standard
hotplug support.
Thus, when an endpoint is attached to the SoC, users have to rescan the bus
manually to enumerate the device. This can be avoided by using the
'dll_link_up' interrupt in the combined system interrupt 'sys'.
Once the 'dll_link_up' IRQ is received, the bus underneath the host bridge
is scanned to enumerate PCIe endpoint devices.
This implements the same functionality that was implemented in the DWC
based pcie-qcom driver in 4581403f67 ("PCI: qcom: Enumerate endpoints
based on Link up event in 'global_irq' interrupt").
The Root Complex specific device tree binding for pcie-dw-rockchip already
has the 'sys' interrupt marked as required, so there is no need to update
the device tree binding. This also means that we can request the 'sys' IRQ
unconditionally.
Link: https://lore.kernel.org/r/20241127145041.3531400-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log, squash Pei Xiao's redundant dev_err() fix from
https://lore.kernel.org/r/327718207d3cd72847c079ff9d56eb246744c182.1736126067.git.xiaopei01@kylinos.cn,
squash Niklas's #define change from https://lore.kernel.org/r/20250103095812.2408364-2-cassel@kernel.org]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
4581403f67 ("PCI: qcom: Enumerate endpoints based on Link up event in
'global_irq' interrupt") added the Link Up-based enumeration support, but
did not update the ICC/OPP vote once link is up. Before that, the update
happened during probe and the endpoints may or may not be enumerated at
that time, so the ICC/OPP vote was not guaranteed to be accurate.
With Link Up-based enumeration support, the driver can request the accurate
vote based on the PCIe link.
Call qcom_pcie_icc_opp_update() in qcom_pcie_global_irq_thread() after
enumerating the endpoints.
Fixes: 4581403f67 ("PCI: qcom: Enumerate endpoints based on Link up event in 'global_irq' interrupt")
Link: https://lore.kernel.org/r/20241123-remove_wait2-v5-3-b5f9e6b794c2@quicinc.com
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
If we have a 'global' IRQ for Link Up events, we need not wait for the
link to be up during PCI initialization, which reduces startup time.
Check for 'global' IRQ, and if present, set 'use_linkup_irq',
so dw_pcie_host_init() doesn't wait for the link to come up.
Link: https://lore.kernel.org/r/20241123-remove_wait2-v5-2-b5f9e6b794c2@quicinc.com
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
If the driver can detect the Link Up event and enumerate downstream devices
at that time, we need not wait here.
Skip waiting for link to come up if the driver supports 'use_linkup_irq'.
Link: https://lore.kernel.org/r/20241123-remove_wait2-v5-1-b5f9e6b794c2@quicinc.com
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: wrap comment, update commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Increase the size of the string buffer to avoid potential truncation in
dw_pcie_edma_irq_verify().
This fixes the following build warning when compiling with W=1:
drivers/pci/controller/dwc/pcie-designware.c: In function ‘dw_pcie_edma_detect’:
drivers/pci/controller/dwc/pcie-designware.c:989:50: warning: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 3 [-Wformat-truncation=]
989 | snprintf(name, sizeof(name), "dma%d", pci->edma.nr_irqs);
| ^~
Link: https://lore.kernel.org/r/20250104002119.2681246-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Use syscon_regmap_lookup_by_phandle_args() which is a wrapper over
syscon_regmap_lookup_by_phandle() combined with getting the syscon
argument. Except simpler code this annotates within one line that given
phandle has arguments, so grepping for code would be easier.
There is also no real benefit in printing errors on missing syscon
argument, because this is done just too late: runtime check on
static/build-time data. Dtschema and Devicetree bindings offer the
static/build-time check for this already.
Link: https://lore.kernel.org/r/20250112-syscon-phandle-args-pci-v1-1-fcb6ebcc0afc@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use syscon_regmap_lookup_by_phandle_args() which is a wrapper over
syscon_regmap_lookup_by_phandle() combined with getting the syscon
argument. Except simpler code this annotates within one line that given
phandle has arguments, so grepping for code would be easier.
Link: https://lore.kernel.org/r/20250112-syscon-phandle-args-pci-v1-2-fcb6ebcc0afc@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Roy Zang <Roy.Zang@nxp.com>
This function essentially duplicates imx7d_pcie_enable_ref_clk(). So remove
it.
Link: https://lore.kernel.org/r/20241126075702.4099164-8-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Ensure the *_enable_ref_clk() function is symmetric by addressing missing
disable parts on some platforms.
Fixes: d0a75c791f ("PCI: imx6: Factor out ref clock disable to match enable")
Link: https://lore.kernel.org/r/20241126075702.4099164-7-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Since the apps_reset is asserted in imx_pcie_assert_core_reset(), it should
be deasserted in imx_pcie_deassert_core_reset().
Fixes: 9b3fe6796d ("PCI: imx6: Add code to support i.MX7D")
Link: https://lore.kernel.org/r/20241126075702.4099164-6-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
The i.MX7D only has one PCIe controller, so controller_id should always be
0. The previous code is incorrect although yielding the correct result.
Fix by removing "IMX7D" from the switch case branch.
Fixes: 2d8ed461db ("PCI: imx6: Add support for i.MX8MQ")
Link: https://lore.kernel.org/r/20241126075702.4099164-5-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Since dw_pcie_get_resources() gets the dbi2 and iATU base addresses from
DT, remove the code from the imx6 driver that does the same.
Upstream DTSes have not enabled Endpoint function. So nothing is broken for
old upstream DTBs.
Link: https://lore.kernel.org/r/20241126075702.4099164-4-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Pass PHY_MODE_PCIE_EP if the PCI controller operates in Endpoint (EP) mode,
and fix the Root Complex (RC) mode being hardcoded using a drvdata mode
check.
Fixes: 8026f2d8e8 ("PCI: imx6: Call common PHY API to set mode, speed, and submode")
Link: https://lore.kernel.org/r/20241119-pci_fixup_addr-v8-6-c4bfa5193288@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Add "ref" clock to enable Refclk. To avoid breaking DT backwards
compatibility, the i.MX95 "ref" clock is optional. Use
devm_clk_get_optional() to fetch i.MX95 PCIe optional clocks in driver.
If using external clock, "ref" clock should point to external reference.
If using internal clock, CREF_EN in LAST_TO_REG controls reference output,
implemented in drivers/clk/imx/clk-imx95-blk-ctl.c.
Link: https://lore.kernel.org/r/20241126075702.4099164-3-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Add support for the i.MX8Q series (i.MX8QM, i.MX8QXP, and i.MX8DXL) PCIe
Endpoint (EP). On the i.MX8Q platforms, the PCI bus addresses differ
from the CPU addresses. However, the DesignWare (DWC) driver already
handles this in the common code.
Link: https://lore.kernel.org/r/20241119-pci_fixup_addr-v8-7-c4bfa5193288@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Now that the core host-bridge infrastructure is able to give us a callback
on each device being added or removed, convert the bus-notifier hack to it.
Link: https://lore.kernel.org/r/20241204150145.800408-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
In order to let host controller drivers using the host-generic
infrastructure use the {en,dis}able_device() callbacks that can be used to
configure sideband RID mapping hardware, provide these two callbacks as
part of the pci_ecam_ops structure.
Link: https://lore.kernel.org/r/20241204150145.800408-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
For the i.MX95, the configuration of a LUT is necessary to convert PCIe
Requester IDs (RIDs) to StreamIDs, which are used by both IOMMU and ITS.
This involves checking msi-map and iommu-map device tree properties to
ensure consistent mapping of Requester IDs to the same StreamIDs.
Subsequently, LUT-related registers are configured. If a msi-map isn't
detected, the platform relies on DWC built-in controller for MSIs that
do not need StreamIDs.
Implement PCI bus callback function to handle enable_device() and
disable_device() operations, setting up the LUT whenever a new PCI
device is enabled.
Known limitations:
- If iommu-map exists in the device tree but the IOMMU controller is
disabled, StreamIDs are programmed into the LUT. However, if a RID
is out of range of the iommu-map, enabling the PCI device would
result in a failure, although the PCI device can work without the
IOMMU.
- If msi-map exists in the device tree but the MSI controller is
disabled, MSIs will not work. The DWC driver skips initializing the
built-in MSI controller, falling back to legacy PCI INTx only.
Link: https://lore.kernel.org/r/20250114-imx95_lut-v9-2-39f58dbed03a@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: fix uninitialized "sid" in imx_pcie_enable_device()]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
Instead of marking individual interrupts as safe to be migrated in
arbitrary contexts, mark the interrupt chips, which require the interrupt
to be moved in actual interrupt context, with the new IRQCHIP_MOVE_DEFERRED
flag. This makes more sense because this is a per interrupt chip property
and not restricted to individual interrupts.
That flips the logic from the historical opt-out to a opt-in model. This is
simpler to handle for other architectures, which default to unrestricted
affinity setting. It also allows to cleanup the redundant core logic
significantly.
All interrupt chips, which belong to a top-level domain sitting directly on
top of the x86 vector domain are marked accordingly, unless the related
setup code marks the interrupts with IRQ_MOVE_PCNTXT, i.e. XEN.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/all/20241210103335.563277044@linutronix.de
Refactor rockchip_pcie_disable_clocks() to accept a struct rockchip_pcie
pointer instead of a void pointer thus improving type safety and code
readability by explicitly specifying the expected data type.
Link: https://lore.kernel.org/r/20241202151150.7393-4-linux.amoon@gmail.com
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Currently, the driver acquires and asserts/deasserts the resets
individually thereby making the driver complex to read.
This can be simplified by using the reset_control_bulk() APIs.
Use devm_reset_control_bulk_get_exclusive() API to acquire all the resets
and use reset_control_bulk_{assert/deassert}() APIs to assert/deassert them
in bulk.
Following the recommendations in 'Rockchip RK3399 TRM v1.3 Part2':
1. Split the reset controls into two groups as per section '17.5.8.1.1
PCIe as Root Complex'.
2. Deassert the 'Pipe, MGMT Sticky, MGMT, Core' resets in groups as per
section '17.5.8.1.1 PCIe as Root Complex'. This is accomplished using
the reset_control_bulk APIs.
Link: https://lore.kernel.org/r/20241202151150.7393-3-linux.amoon@gmail.com
Co-developed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
[kwilczynski: squash error handling fix from https://lore.kernel.org/r/7da6ac56-af55-4436-9597-6af24df8122c@stanley.mountain]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based
on the alias from of_device_id table.
Link: https://lore.kernel.org/r/20240903132311.961646-1-liaochen4@huawei.com
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Currently, the driver acquires clocks and prepare/enable/disable/unprepare
the clocks individually thereby making the driver complex to read.
The driver can be simplified by using the clk_bulk*() APIs.
Use:
- devm_clk_bulk_get_all() API to acquire all the clocks
- clk_bulk_prepare_enable() to prepare/enable clocks
- clk_bulk_disable_unprepare() APIs to disable/unprepare them in bulk
Link: https://lore.kernel.org/r/20241202151150.7393-2-linux.amoon@gmail.com
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
[bhelgaas: squash error handling fix from https://lore.kernel.org/r/20250106153041.55267-1-linux.amoon@gmail.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
When compiling the Rockchip endpoint driver with -W=1, the following
warnings can be seen in the output:
drivers/pci/controller/pcie-rockchip-ep.c:59: warning: Function parameter or struct member 'perst_irq' not described in 'rockchip_pcie_ep'
drivers/pci/controller/pcie-rockchip-ep.c:59: warning: Function parameter or struct member 'perst_asserted' not described in 'rockchip_pcie_ep'
drivers/pci/controller/pcie-rockchip-ep.c:59: warning: Function parameter or struct member 'link_up' not described in 'rockchip_pcie_ep'
drivers/pci/controller/pcie-rockchip-ep.c:59: warning: Function parameter or struct member 'link_training' not described in 'rockchip_pcie_ep'
Fix these warnings by adding the missing field descriptions in
struct rockchip_pcie_ep kernel-doc comment.
Fixes: a7137cbf6b ("PCI: rockchip-ep: Handle PERST# signal in EP mode")
Fixes: bd6e61df4b ("PCI: rockchip-ep: Improve link training")
Link: https://lore.kernel.org/r/20241216133404.540736-1-dlemoal@kernel.org
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The rcar_pcie_parse_outbound_ranges() uses the devm_request_mem_region()
macro to request a needed resource. A string variable that lives on the
stack is then used to store a dynamically computed resource name, which
is then passed on as one of the macro arguments. This can lead to
undefined behavior.
Depending on the current contents of the memory, the manifestations of
errors may vary. One possible output may be as follows:
$ cat /proc/iomem
30000000-37ffffff :
38000000-3fffffff :
Sometimes, garbage may appear after the colon.
In very rare cases, if no NULL-terminator is found in memory, the system
might crash because the string iterator will overrun which can lead to
access of unmapped memory above the stack.
Thus, fix this by replacing outbound_name with the name of the previously
requested resource. With the changes applied, the output will be as
follows:
$ cat /proc/iomem
30000000-37ffffff : memory2
38000000-3fffffff : memory3
Fixes: 2a6d0d63d9 ("PCI: rcar: Add endpoint mode support")
Link: https://lore.kernel.org/r/tencent_DBDCC19D60F361119E76919ADAB25EC13C06@qq.com
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: King Dix <kingdix10@qq.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The mediatek-gen3 driver can run its probe routine fairly slow on some
hardware, which adds to the total time it takes for the system start up.
Thus, turn on async mode for the probe to avoid blocking the rest of the
system.
Link: https://lore.kernel.org/r/20241220145205.1.Ibf2563896c3b1fc133bb46d3fc96ad0041763922@changeid
Signed-off-by: Douglas Anderson <dianders@chromium.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Airoha EN7581 has a hw bug asserting/releasing PERST# signal causing
occasional PCIe link down issues. In order to overcome the problem,
PERST# signal is not asserted/released during device probe or
suspend/resume phase and the PCIe block is reset using
en7523_reset_assert() and en7581_pci_enable().
Introduce flags field in the mtk_gen3_pcie_pdata struct in order to
specify per-SoC capabilities.
Link: https://lore.kernel.org/r/20250109-pcie-en7581-rst-fix-v4-1-4a45c89fb143@kernel.org
Tested-by: Hui Ma <hui.ma@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Since mtk_pcie_en7581_power_up() runs in non-atomic context, rely on
msleep() routine instead of mdelay().
Link: https://lore.kernel.org/r/20250108-pcie-en7581-fixes-v6-5-21ac939a3b9b@kernel.org
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Airoha EN7581 has a hw bug asserting/releasing PCIE_PE_RSTB signal
causing occasional PCIe link down issues. In order to overcome the
problem, PCIe block is reset using REG_PCI_CONTROL (0x88) and
REG_RESET_CONTROL (0x834) registers available in the clock module
running clk_bulk_prepare_enable() in mtk_pcie_en7581_power_up().
In order to make the code more readable, move the wait for the time
needed to complete the PCIe reset from en7581_pci_enable() to
mtk_pcie_en7581_power_up().
Reduce reset timeout from 250ms to the standard PCIE_T_PVPERL_MS value
(100ms) since it has no impact on the driver behavior.
Link: https://lore.kernel.org/r/20250108-pcie-en7581-fixes-v6-4-21ac939a3b9b@kernel.org
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Add a comment in mtk_pcie_en7581_power_up() to clarify, unlike the other
MediaTek Gen3 controllers, the Airoha EN7581 requires PHY initialization
and power-on before PHY reset deassert.
Link: https://lore.kernel.org/r/20250108-pcie-en7581-fixes-v6-3-21ac939a3b9b@kernel.org
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
In order to make the code more readable, the reset_control_bulk_assert()
function for PHY reset lines is moved to make it pair with
reset_control_bulk_deassert() in mtk_pcie_power_up() and
mtk_pcie_en7581_power_up(). The same change is done for
reset_control_assert() used to assert MAC reset line.
Introduce PCIE_MTK_RESET_TIME_US macro for the time needed to
complete PCIe reset on MediaTek controller.
Link: https://lore.kernel.org/r/20250108-pcie-en7581-fixes-v6-2-21ac939a3b9b@kernel.org
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Replace clk_bulk_prepare() and clk_bulk_enable() with
clk_bulk_prepare_enable() in mtk_pcie_en7581_power_up() routine.
Link: https://lore.kernel.org/r/20250108-pcie-en7581-fixes-v6-1-21ac939a3b9b@kernel.org
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The helper devm_clk_bulk_get_all_enable() missed to return the number of
clocks stored in the clk_bulk_data table referenced by the clks
argument and, therefore, will be dropped.
Use the newly introduced devm_clk_bulk_get_all_enabled() variant
instead, which is consistent with devm_clk_bulk_get_all() in terms of
the returned value:
> 0 if one or more clocks have been stored
= 0 if there are no clocks
< 0 if an error occurred
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20241217-clk_bulk_ena_fix-v5-2-aafbbb245155@collabora.com
Acked-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for the Xilinx Versal CPM5 Root Port Controller 1. The key
difference between Controller 0 and Controller 1 lies in the
platform-specific error interrupt bits, which are located at different
register offsets.
To handle these differences, updated variant structure to hold the
following platform-specific details:
- Interrupt status register offset (ir_status)
- Interrupt enable register offset (ir_enable)
- Miscellaneous interrupt values (ir_misc_value)
The driver differentiates between Controller 0 and Controller 1 using the
compatible string in the device tree. This ensures that the appropriate
register offsets are used for each controller, allowing for correct
handling of platform-specific interrupts and initialization.
Link: https://lore.kernel.org/r/20240922061318.2653503-3-thippesw@amd.com
Signed-off-by: Thippeswamy Havalige <thippesw@amd.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
All non-DWC EPC drivers implement (struct pci_epc *)->ops->get_features().
All DWC EPC drivers implement (struct dw_pcie_ep *)->ops->get_features(),
except for pcie-artpec6.c.
epc_features has been required in pci-epf-test.c since commit 6613bc2301
("PCI: endpoint: Fix NULL pointer dereference for ->get_features()").
A follow-up commit will make further use of epc_features in EPC core code.
Implement epc_features in the only EPC driver where it is currently not
implemented.
Link: https://lore.kernel.org/r/20241213143301.4158431-12-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
dw_pcie_prog_ep_inbound_atu() is used to program an inbound iATU in
"BAR Match Mode".
A memory address returned by e.g. kmalloc() is guaranteed to have natural
alignment (aligned to the size of the allocation). It is however not
guaranteed that pci_epc_set_bar() (and thus dw_pcie_prog_ep_inbound_atu())
is supplied an address that has natural alignment. (An EPF driver can send
in an arbitrary physical address to pci_epc_set_bar().)
The DWC Databook description for the LWR_TARGET_RW and LWR_TARGET_HW fields
in the IATU_LWR_TARGET_ADDR_OFF_INBOUND_i registers state that:
"Field size depends on log2(BAR_MASK+1) in BAR match mode."
I.e. only the upper bits are writable, and the number of writable bits is
dependent on the configured BAR_MASK.
Add a check to ensure that the physical address programmed in the iATU is
aligned to the size of the BAR (BAR_MASK+1), as without this, we can get
hard to debug errors, as we could write to bits that are read-only (without
getting a write error), which could cause the iATU to end up redirecting to
a physical address that is different from the address that we intended.
Link: https://lore.kernel.org/r/20241213143301.4158431-11-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
In commit 4284c88fff ("PCI: designware-ep: Allow pci_epc_set_bar() update
inbound map address") set_bar() was modified to support dynamically
changing the backing physical address of a BAR that was already configured.
This means that set_bar() can be called twice, without ever calling
clear_bar() (as calling clear_bar() would clear the BAR's PCI address
assigned by the host).
This can only be done if the new BAR size/flags does not differ from the
existing BAR configuration. Add these missing checks.
If we allow set_bar() to set e.g. a new BAR size that differs from the
existing BAR size, the new address translation range will be smaller than
the BAR size already determined by the host, which would mean that a read
past the new BAR size would pass the iATU untranslated, which could allow
the host to read memory not belonging to the new struct pci_epf_bar.
While at it, add comments which clarifies the support for dynamically
changing the physical address of a BAR. (Which was also missing.)
Fixes: 4284c88fff ("PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address")
Link: https://lore.kernel.org/r/20241213143301.4158431-10-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: stable@vger.kernel.org
The "DesignWare Cores PCI Express Controller Register Descriptions,
Version 4.60a", section "1.21.70 IATU_LWR_TARGET_ADDR_OFF_INBOUND_i",
fields LWR_TARGET_RW and LWR_TARGET_HW both state that:
"Field size depends on log2(BAR_MASK+1) in BAR match mode."
I.e. only the upper bits are writable, and the number of writable bits is
dependent on the configured BAR_MASK.
If we do not write the BAR_MASK before writing the iATU registers, we are
relying the reset value of the BAR_MASK being larger than the requested
BAR size (which is supplied in the struct pci_epf_bar which is passed to
pci_epc_set_bar()). The reset value of the BAR_MASK is SoC dependent.
Thus, if the struct pci_epf_bar requests a BAR size that is larger than the
reset value of the BAR_MASK, the iATU will try to write to read-only bits,
which will cause the iATU to end up redirecting to a physical address that
is different from the address that was intended.
Thus, we should always write the iATU registers after writing the BAR_MASK.
Fixes: f8aed6ec62 ("PCI: dwc: designware: Add EP mode support")
Link: https://lore.kernel.org/r/20241213143301.4158431-9-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: stable@vger.kernel.org
- Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel)
* pci/controller/vmd:
PCI: vmd: Add DID 8086:B06F and 8086:B60B for Intel client SKUs
- Move endpoint controller cleanups that depend on refclk from the host to
the notifier that tells us the host has deasserted PERST# (Manivannan
Sadhasivam)
* pci/controller/tegra194:
PCI: tegra194: Move controller cleanups to pex_ep_event_pex_rst_deassert()
- Fix address translation unit programming (Damien Le Moal)
- Define ROCKCHIP_PCIE_AT_SIZE_ALIGN to replace magic 256 endpoint .align
value (Damien Le Moal)
- When unmapping an endpoint window, compute the region index instead of
searching for it, and verify that the address was mapped (Damien Le Moal)
- When mapping an endpoint window, verify that the address hasn't been
mapped already (Damien Le Moal)
- Implement pci_epc_ops.align_addr() for rockchip-ep (Damien Le Moal)
- Fix MSI IRQ data mapping to observe the alignment constraint, which fixes
intermittent page faults in memcpy_toio() and memcpy_fromio() (Damien Le
Moal)
- Rename rockchip_pcie_parse_ep_dt() to rockchip_pcie_ep_get_resources()
for consistency with similar DT interfaces (Damien Le Moal)
- Factor out memory allocations to tidy rockchip_pcie_ep_probe() (Damien Le
Moal)
- Factor out MSI-X quirk to tidy rockchip_pcie_ep_probe() (Damien Le Moal)
- Skip the unnecessary link train in rockchip_pcie_ep_probe() and only in
the endpoint start operation (Damien Le Moal)
- Implement pci_epc_ops.stop_link() to disable link training and controller
configuration (Damien Le Moal)
- Attempt link training at 5 GT/s when both partners support it (Damien Le
Moal)
- Add a handler for PERST# signal so we can detect host resets and start
link training when exiting reset (Damien Le Moal)
* pci/controller/rockchip:
PCI: rockchip-ep: Handle PERST# signal in EP mode
PCI: rockchip-ep: Improve link training
PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation
PCI: rockchip-ep: Refactor endpoint link training enable
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations
PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt()
PCI: rockchip-ep: Fix MSI IRQ data mapping
PCI: rockchip-ep: Implement the pci_epc_ops::align_addr() operation
PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr()
PCI: rockchip-ep: Use a macro to define EP controller .align feature
PCI: rockchip-ep: Fix address translation unit programming
- Enable MSI interrupts if 'global' IRQ is supported, since a previous
commit unintentionally masked them (Manivannan Sadhasivam)
- Move endpoint controller cleanups that depend on refclk from the host to
the notifier that tells us the host has deasserted PERST# (Manivannan
Sadhasivam)
- Add DT binding and driver support for IPQ9574, with Synopsys IP v5.80a
and Qcom IP 1.27.0 (devi priya)
- Move the OPP "operating-points-v2" table from the qcom,pcie-sm8450.yaml
DT binding to qcom,pcie-common.yaml, where it can be used by other Qcom
platforms (Qiang Yu)
- Add 'global' SPI interrupt for events like link-up, link-down to
qcom,pcie-x1e80100 DT binding so we can start enumeration when the link
comes up (Qiang Yu)
- Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned to
support this (Qiang Yu)
- Add ops_1_21_0 for SC8280X family SoC, which doesn't use the 'iommu-map'
DT property and doesn't need BDF-to-SID translation (Qiang Yu)
* pci/controller/qcom:
PCI: qcom: Disable ASPM L0s for X1E80100
PCI: qcom: Remove BDF2SID mapping config for SC8280X family SoC
dt-bindings: PCI: qcom,pcie-x1e80100: Add 'global' interrupt
dt-bindings: PCI: qcom: Move OPP table to qcom,pcie-common.yaml
PCI: qcom: Add support for IPQ9574
dt-bindings: PCI: qcom: Document the IPQ9574 PCIe controller
PCI: qcom-ep: Move controller cleanups to qcom_pcie_perst_deassert()
PCI: qcom: Enable MSI interrupts together with Link up if 'Global IRQ' is supported
- Add DT and driver support for using either of the two PolarFire Root
Ports (Conor Dooley)
* pci/controller/microchip:
PCI: microchip: Add support for using either Root Port 1 or 2
dt-bindings: PCI: microchip,pcie-host: Add reg for Root Port 2
- Add support for DT 'max-link-speed' and 'num-lanes' properties to
restrict the link speed and width (AngeloGioacchino Del Regno)
* pci/controller/mediatek:
PCI: mediatek-gen3: Remove unneeded semicolon
PCI: mediatek-gen3: Add support for restricting link width
PCI: mediatek-gen3: Add support for setting max-link-speed limit
- Set the 'ti,keystone-pcie' mode so v3.65a devices work in Root Complex
mode (Kishon Vijay Abraham I)
- Try to avoid unrecoverable SError for attempts to issue config
transactions when the link is down; this is racy but the best we can do
(Kishon Vijay Abraham I)
* pci/controller/keystone:
PCI: keystone: Add link up check to ks_pcie_other_map_bus()
PCI: keystone: Set mode as Root Complex for "ti,keystone-pcie" compatible
- Add PCIe support for J722S SoC (Siddharth Vadapalli)
- Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100 us),
before deasserting PERST# to ensure power and refclk are stable
(Siddharth Vadapalli)
* pci/controller/j721e:
PCI: j721e: Deassert PERST# after a delay of PCIE_T_PVPERL_MS milliseconds
PCI: j721e: Add PCIe support for J722S SoC
- Fix suspend/resume support on i.MX6QDL, which has a hardware erratum that
prevents use of L2 (Stefan Eichenberger)
* pci/controller/imx6:
PCI: imx6: Fix suspend/resume support on i.MX6QDL
- Clear outbound address on unmap so dw_pcie_find_index() won't match an
ATU index that was already unmapped (Damien Le Moal)
- Use of_property_present() instead of of_property_read_bool() when testing
for presence of non-boolean DT properties (Rob Herring)
- Advertise 1MB size if endpoint supports Resizable BARs, which was
inadvertently lost in v6.11 (Niklas Cassel)
* pci/controller/dwc:
PCI: dwc: ep: Fix advertised resizable BAR size regression
PCI: dwc: Use of_property_present() for non-boolean properties
PCI: dwc: endpoint: Clear outbound address on unmap
- Lower severity of 'phy-names' message (Bartosz Wawrzyniak)
* pci/controller/cadence:
PCI: cadence: Lower severity of message when phy-names property is absent in DTS
- Add pci_epc_function_is_valid() to avoid repeating common validation
checks (Damien Le Moal)
- Skip attempts to allocate from endpoint controller memory window if the
requested size is larger than the window (Damien Le Moal)
- Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to handle
controller-specific size and alignment constraints, and add test cases to
the endpoint test driver (Damien Le Moal)
- Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can observe
DWC-specific alignment requirements (Damien Le Moal)
- Synchronously cancel command handler work in endpoint test before
cleaning up DMA and BARs (Damien Le Moal)
- Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas Cassel)
- Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and
dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent (Niklas
Cassel)
- Remove superfluous 'return' from pci_epf_test_clean_dma_chan() (Wang
Jiang)
- Avoid NULL dereference if Modem Host Interface Endpoint lacks 'mmio' DT
property (Zhongqiu Han)
- Release PCI domain ID of Endpoint controller parent (not controller
itself) and before unregistering the controller, to avoid use-after-free
(Zijun Hu)
- Clear secondary (not primary) EPC in pci_epc_remove_epf() when removing
the secondary controller associated with an NTB (Zijun Hu)
- Fix pci_epc_map map_size kerneldoc (Rick Wertenbroek)
* pci/endpoint:
PCI: endpoint: Fix pci_epc_map map_size kerneldoc string
PCI: endpoint: Clear secondary (not primary) EPC in pci_epc_remove_epf()
PCI: endpoint: Fix PCI domain ID release in pci_epc_destroy()
PCI: endpoint: epf-mhi: Avoid NULL dereference if DT lacks 'mmio'
PCI: endpoint: Remove surplus return statement from pci_epf_test_clean_dma_chan()
PCI: dwc: ep: Use align addr function for dw_pcie_ep_raise_{msi,msix}_irq()
PCI: endpoint: test: Synchronously cancel command handler work
PCI: dwc: endpoint: Implement the pci_epc_ops::align_addr() operation
PCI: endpoint: test: Use pci_epc_mem_map/unmap()
PCI: endpoint: Update documentation
PCI: endpoint: Introduce pci_epc_mem_map()/unmap()
PCI: endpoint: Improve pci_epc_mem_alloc_addr()
PCI: endpoint: Introduce pci_epc_function_is_valid()
- Add resource_set_size() to set resource size when start has already been
set (Ilpo Järvinen)
- Add resource_set_range() helper to set both resource start and size (Ilpo
Järvinen)
- Use IS_ALIGNED() and resource_size() in quirk_s3_64M() instead of
open-coding them (Ilpo Järvinen)
- Add ALIGN_DOWN_IF_NONZERO() to avoid code duplication when distributing
resources across devices (Ilpo Järvinen)
- Improve pdev_sort_resources() warning message to be more specific (Ilpo
Järvinen)
* pci/resource:
PCI: Improve pdev_sort_resources() warning message
PCI: Add ALIGN_DOWN_IF_NONZERO() helper
PCI: Use align and resource helpers, and SZ_* in quirk_s3_64M()
PCI: Use resource_set_{range,size}() helpers
resource: Add resource set range and size helpers
- Convert driver .remove_new() callbacks to .remove() again to finish the
conversion from returning 'int' to being 'void' (Sergio Paracuellos)
* pci/driver-remove:
PCI: acpiphp_ampere_altra: Switch back to struct platform_driver::remove()
PCI: controller: Switch back to struct platform_driver::remove()
Currently, the Rockchip PCIe endpoint controller driver does not handle
the PERST# signal, which prevents detecting when link training should
actually be started or if the host resets the device. This however can
be supported using the controller reset_gpios property set as an input
GPIO for endpoint mode.
Modify the Rockchip PCI endpoint controller driver to get the reset_gpio
and its associated interrupt which is serviced using a threaded IRQ with
the function rockchip_pcie_ep_perst_irq_thread() as handler.
This handler function notifies a link down event corresponding to the RC
side asserting the PERST# signal using pci_epc_linkdown() when the gpio
is high. Once the gpio value goes down, corresponding to the RC
de-asserting the PERST# signal, link training is started. The polarity
of the gpio interrupt trigger is changed from high to low after the RC
asserted PERST#, and conversely changed from low to high after the RC
de-asserts PERST#.
Also, given that the host mode controller and the endpoint mode
controller use two different property names for the same PERST# signal
(ep_gpios property and reset_gpios property respectively), for clarity,
rename the ep_gpio field of struct rockchip_pcie to perst_gpio.
Link: https://lore.kernel.org/r/20241017015849.190271-14-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
[kwilczynski: make log messages consistent, add missing include]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The Rockchip RK3399 TRM V1.3 Part2, Section 17.5.8.1.2, step 7,
describes the endpoint mode link training process clearly and states
that:
Insure link training completion and success by observing link_st field
in PCIe Client BASIC_STATUS1 register change to 2'b11. If both side
support PCIe Gen2 speed, re-train can be Initiated by asserting the
Retrain Link field in Link Control and Status Register. The software
should insure the BASIC_STATUS0[negotiated_speed] changes to "1", that
indicates re-train to Gen2 successfully.
This procedure is very similar to what is done for the root-port mode
in rockchip_pcie_host_init_port().
Implement this link training procedure for the endpoint mode as well.
Given that the RK3399 SoC does not have an interrupt signaling link
status changes, training is implemented as a delayed work which is
rescheduled until the link training completes or the endpoint controller
is stopped. The link training work is first scheduled in
rockchip_pcie_ep_start() when the endpoint function is started. Link
training completion is signaled to the function using pci_epc_linkup().
Accordingly, the linkup_notifier field of the Rockchip pci_epc_features
structure is changed to true.
Link: https://lore.kernel.org/r/20241017015849.190271-13-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
[kwilczynski: update log messages to make them consistent]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Define the EPC operation ->stop() for the Rockchip endpoint driver with
the function rockchip_pcie_ep_stop(). This function disables link
training and the controller configuration, as the reverse to what
the start operation defined with rockchip_pcie_ep_start() does.
Link: https://lore.kernel.org/r/20241017015849.190271-12-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The function rockchip_pcie_init_port() enables link training for a
controller configured in EP mode. Enabling link training is again done
in rockchip_pcie_ep_probe() after that function executed
rockchip_pcie_init_port(). Enabling link training only needs to be done
once, and doing so at the probe stage before the controller is actually
started by the user serves no purpose.
Refactor this by removing the link training enablement from both
rockchip_pcie_init_port() and rockchip_pcie_ep_probe() and moving it to
the endpoint start operation defined with rockchip_pcie_ep_start().
Enabling the controller configuration using the PCIE_CLIENT_CONF_ENABLE
bit in the same PCIE_CLIENT_CONFIG register is also moved to
rockchip_pcie_ep_start() and both the controller configuration and link
training enable bits are set with a single call to
rockchip_pcie_write().
Link: https://lore.kernel.org/r/20241017015849.190271-11-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Move the code in rockchip_pcie_ep_probe() to hide the MSI-X capability
to its own function, rockchip_pcie_ep_hide_broken_msix_cap().
No functional changes.
Link: https://lore.kernel.org/r/20241017015849.190271-10-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Introduce the function rockchip_pcie_ep_init_ob_mem() allocate the
outbound memory regions and memory needed for IRQ handling.
These changes tidy up rockchip_pcie_ep_probe().
No functional change.
Link: https://lore.kernel.org/r/20241017015849.190271-9-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
To be consistent with the usual "get_resources" naming of driver
functions that acquire controller resources like clocks, PHY etc,
rename the function rockchip_pcie_parse_ep_dt() to
rockchip_pcie_ep_get_resources().
No functional changes.
Link: https://lore.kernel.org/r/20241017015849.190271-8-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The call to rockchip_pcie_prog_ep_ob_atu() used to map the PCI address
of MSI data to the memory window allocated on probe for IRQs is done
in rockchip_pcie_ep_send_msi_irq() assuming a fixed alignment to a
256B boundary of the PCI address. This is not correct as the alignment
constraint for the RK3399 PCI mapping depends on the number of bits of
address changing in the mapped region. This leads to an unstable system
which sometimes work and sometimes does not (crashing on paging faults
when memcpy_toio() or memcpy_fromio() are used).
Similar to regular data mapping, the MSI data mapping must thus be
handled according to the information provided by
rockchip_pcie_ep_align_addr(). Modify rockchip_pcie_ep_send_msi_irq()
to use rockchip_pcie_ep_align_addr() to correctly program entry 0 of
the ATU for sending MSI IRQs.
Link: https://lore.kernel.org/r/20241017015849.190271-7-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The Rockchip PCIe endpoint controller handles PCIe transfers addresses
by masking the lower bits of the programmed PCI address and using the
same number of lower bits from the CPU address space used for the
mapping. For a PCI mapping of size bytes starting from pci_addr, the
number of bits masked is the number of address bits changing in the
address range [pci_addr..pci_addr + size - 1], up to 20 bits, that is,
up to 1MB mappings.
This means that when preparing a PCI address mapping, an endpoint
function driver must use an offset into the allocated controller
memory region that is equal to the mask of the starting PCI address
over rockchip_pcie_ep_ob_atu_num_bits() bits. This offset also
determines the maximum size of the mapping given the starting PCI
address and the fixed 1MB controller memory window size.
Implement the ->align_addr() endpoint controller operation to allow the
mapping alignment to be transparently handled by endpoint function
drivers through the function pci_epc_mem_map().
Link: https://lore.kernel.org/r/20241017015849.190271-6-dlemoal@kernel.org
Co-developed-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
[kwilczynski: change local variable name for address offset]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add a check to verify that the outbound region to be used for mapping an
address is not already in use.
Link: https://lore.kernel.org/r/20241017015849.190271-5-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
There is no need to loop over all regions to find the memory window used
to map an address. We can use rockchip_ob_region() to determine the
region index, together with a check that the address passed as argument
is the address used to create the mapping. Furthermore, the
ob_region_map bitmap should also be checked to ensure that we are not
attempting to unmap an address that is not mapped.
Link: https://lore.kernel.org/r/20241017015849.190271-4-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Introduce the macro ROCKCHIP_PCIE_AT_SIZE_ALIGN to initialize the .align
field of the controller epc_features structure to 256. This is defined
as a shift using the macro ROCKCHIP_PCIE_AT_MIN_NUM_BITS (to avoid
using the "magic" value 8 directly).
Link: https://lore.kernel.org/r/20241017015849.190271-3-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The Rockchip PCIe endpoint controller handles PCIe transfers addresses
by masking the lower bits of the programmed PCI address and using the
same number of lower bits masked from the CPU address space used for the
mapping. For a PCI mapping of <size> bytes starting from <pci_addr>,
the number of bits masked is the number of address bits changing in the
address range [pci_addr..pci_addr + size - 1].
However, rockchip_pcie_prog_ep_ob_atu() calculates num_pass_bits only
using the size of the mapping, resulting in an incorrect number of mask
bits depending on the value of the PCI address to map.
Fix this by introducing the helper function
rockchip_pcie_ep_ob_atu_num_bits() to correctly calculate the number of
mask bits to use to program the address translation unit. The number of
mask bits is calculated depending on both the PCI address and size of
the mapping, and clamped between 8 and 20 using the macros
ROCKCHIP_PCIE_AT_MIN_NUM_BITS and ROCKCHIP_PCIE_AT_MAX_NUM_BITS. As
defined in the Rockchip RK3399 TRM V1.3 Part2, Sections 17.5.5.1.1 and
17.6.8.2.1, this clamping is necessary because:
1) The lower 8 bits of the PCI address to be mapped by the outbound
region are ignored. So a minimum of 8 address bits are needed and
imply that the PCI address must be aligned to 256.
2) The outbound memory regions are 1MB in size. So while we can specify
up to 63-bits for the PCI address (num_bits filed uses bits 0 to 5 of
the outbound address region 0 register), we must limit the number of
valid address bits to 20 to match the memory window maximum size (1
<< 20 = 1MB).
Fixes: cf590b0783 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Link: https://lore.kernel.org/r/20241017015849.190271-2-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.
Link: https://lore.kernel.org/r/20241104190714.275977-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Use the dw_pcie_ep_align_addr() function to calculate the alignment in
dw_pcie_ep_raise_{msi,msix}_irq() instead of open coding the same.
Link: https://lore.kernel.org/r/20241017132052.4014605-6-cassel@kernel.org
Link: https://lore.kernel.org/r/20241104205144.409236-2-cassel@kernel.org
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
[kwilczynski: squashed patch that fixes memory map sizes]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
A PCI controller device, e.g., StarFive, is parent to PCI host bridge
device. We must enable runtime PM of the controller before enabling runtime
PM of the host bridge, which will happen in pci_host_probe(), to avoid this
warning:
pcie-starfive 940000000.pcie: Enabling runtime PM for inactive device with active children
Fix this issue by enabling StarFive controller device's runtime PM before
calling pci_host_probe() in plda_pcie_host_init().
Link: https://lore.kernel.org/r/20241111-runtime_pm-v7-1-9c164eefcd87@quicinc.com
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mayank Rana <quic_mrana@quicinc.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Remove a surplus semicolon and fix the following warning:
./drivers/pci/controller/pcie-mediatek-gen3.c:414:2-3: Unneeded semicolon
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=11789
Link: https://lore.kernel.org/r/20241111010935.20208-1-yang.lee@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The "phy-names" property is optional, so the message indicating its
absence during the probe should be of "info" severity rather than
"error" severity.
Link: https://lore.kernel.org/r/20241018113045.2050295-1-bwawrzyn@cisco.com
Signed-off-by: Bartosz Wawrzyniak <bwawrzyn@cisco.com>
[kwilczynski: update log messages wording, commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
K2G forwards the error triggered by a link-down state (e.g., no connected
endpoint device) on the system bus for PCI configuration transactions;
these errors are reported as an SError at system level, which is fatal and
hangs the system.
So, apply fix similar to how it was done in the DesignWare Core driver
commit 15b2390634 ("PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()").
Fixes: 10a797c6e5 ("PCI: dwc: keystone: Use pci_ops for config space accessors")
Link: https://lore.kernel.org/r/20240524105714.191642-3-s-vadapalli@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
[kwilczynski: commit log, added tag for stable releases]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Cc: stable@vger.kernel.org
commit 23284ad677 ("PCI: keystone: Add support for PCIe EP in AM654x
Platforms") introduced configuring "enum dw_pcie_device_mode" as part of
device data ("struct ks_pcie_of_data"). However it failed to set the
mode for "ti,keystone-pcie" compatible.
Since the mode defaults to "DW_PCIE_UNKNOWN_TYPE", the following error
message is displayed for the v3.65a controller:
"INVALID device type 0"
Despite the driver probing successfully, the controller may not be
functional in the Root Complex mode of operation.
So, set the mode as Root Complex for "ti,keystone-pcie" compatible to
fix this.
Fixes: 23284ad677 ("PCI: keystone: Add support for PCIe EP in AM654x Platforms")
Link: https://lore.kernel.org/r/20240524105714.191642-2-s-vadapalli@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
[kwilczynski: commit log, added tag for stable releases]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Cc: stable@vger.kernel.org
The PCI host controller on PolarFire SoC has multiple Root Port instances,
each with their own bridge and ctrl address spaces. The original binding
has an "apb" register region, and it is expected to be set to the base
address of the Root Complex register space. Some defines in the Linux
driver were used to compute the addresses of the bridge and ctrl address
ranges corresponding to Root Port instance 1. Some customers want to use
Root Port instance 2 however, which requires changing the defines in the
driver, which is clearly not a portable solution.
The binding has been changed from a single register region to a pair,
corresponding to the bridge and ctrl regions respectively, so modify the
driver to read these regions directly from the devicetree rather than
compute them from the base address of the abp region.
To maintain backwards compatibility with the existing binding, the driver
retains code to handle the "abp" reg and computes the base address of the
bridge and ctrl regions using the defines if it is present. reg-names has
always been a required property, so this is safe to do.
Link: https://lore.kernel.org/r/20241107-surrender-brisket-287d563a5de1@spud
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
[bhelgaas: Capitalize PCIe spec terms]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The remapped PCIe Root Port and the child device have PM L1 Substates
capability, but they are disabled originally.
Here is a failed example on ASUS B1400CEAE:
Capabilities: [900 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1- L1_PM_Substates+
PortCommonModeRestoreTime=32us PortTPowerOnTime=10us
L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1-
T_CommonMode=0us LTR1.2_Threshold=101376ns
L1SubCtl2: T_PwrOn=50us
Enable PCI-PM L1 PM Substates for devices below VMD while they are in D0
(see PCIe r6.0, sec 5.5.4).
Link: https://lore.kernel.org/r/20241001083438.10070-4-jhp@endlessos.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218394
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Add support for this VMD device which supports the bus restriction mode.
The feature that turns off vector 0 for MSI-X remapping is also enabled.
Link: https://lore.kernel.org/r/20241011175657.249948-1-nirmal.patel@linux.intel.com
Signed-off-by: Nirmal Patel <nirmal.patel@linux.ntel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The suspend/resume functionality is currently broken on the i.MX6QDL
platform, as documented in the NXP errata (ERR005723):
https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
This patch addresses the issue by sharing most of the suspend/resume
sequences used by other i.MX devices, while avoiding modifications to
critical registers that disrupt the PCIe functionality. It targets the
same problem as the following downstream commit:
4e92355e1f
Unlike the downstream commit, this patch also resets the connected PCIe
device if possible. Without this reset, certain drivers, such as ath10k
or iwlwifi, will crash on resume. The device reset is also done by the
driver on other i.MX platforms, making this patch consistent with
existing practices.
Upon resuming, the kernel will hang and display an error. Here's an
example of the error encountered with the ath10k driver:
ath10k_pci 0000:01:00.0: Unable to change power state from D3hot to D0, device inaccessible
Unhandled fault: imprecise external abort (0x1406) at 0x0106f944
Without this patch, suspend/resume will fail on i.MX6QDL devices if a
PCIe device is connected.
Link: https://lore.kernel.org/r/20241030103250.83640-1-eichest@gmail.com
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
[kwilczynski: commit log, added tag for stable releases]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
Cc: stable@vger.kernel.org
Add support for restricting the port's link width by specifying
the num-lanes devicetree property in the PCIe node.
The setting is done in the GEN_SETTINGS register (in the driver
named as PCIE_SETTING_REG), where each set bit in [11:8] activates
a set of lanes (from bits 11 to 8 respectively, x16/x8/x4/x2).
Link: https://lore.kernel.org/r/20241104114935.172908-3-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The function dw_pcie_prog_outbound_atu() used to program outbound ATU
entries for mapping RC PCI addresses to local CPU addresses does not
allow PCI addresses that are not aligned to the value of region_align
of struct dw_pcie. This value is determined from the iATU hardware
registers during probing of the iATU (done by dw_pcie_iatu_detect()).
This value is thus valid for all DWC PCIe controllers, and valid
regardless of the hardware configuration used when synthesizing the
DWC PCIe controller.
Implement the ->align_addr() endpoint controller operation to allow
this mapping alignment to be transparently handled by endpoint function
drivers through the function pci_epc_mem_map().
Link: https://lore.kernel.org/linux-pci/20241012113246.95634-7-dlemoal@kernel.org
Link: https://lore.kernel.org/linux-pci/20241015090712.112674-1-dlemoal@kernel.org
Link: https://lore.kernel.org/linux-pci/20241017132052.4014605-5-cassel@kernel.org
Co-developed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
[mani: squashed the patch that changed phy_addr_t to u64]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: squashed patch that updated the pci_size variable]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add support for respecting the max-link-speed devicetree property,
forcing a maximum speed (Gen) for a PCI-Express port.
Since the MediaTek PCIe Gen3 controllers also expose the maximum
supported link speed in the PCIE_BASE_CFG register, if property
max-link-speed is specified in devicetree, validate it against the
controller capabilities and proceed setting the limitations only
if the wanted Gen is lower than the maximum one that is supported
by the controller itself (otherwise it makes no sense!).
Link: https://lore.kernel.org/r/20241104114935.172908-2-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[kwilczynski: change dev_dbg() to dev_info() and update message wording]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Currently, the cfg_1_9_0 which is being used for X1E80100 doesn't disable
ASPM L0s. However, hardware team recommends to disable L0s as the PHY init
sequence is not tuned support L0s. Hence reuse cfg_sc8280xp for X1E80100.
Note that the config_sid() callback is not present in cfg_sc8280xp, don't
concern about this because config_sid() callback is originally a no-op
for X1E80100.
Fixes: 6d0c39324c ("PCI: qcom: Add X1E80100 PCIe support")
Link: https://lore.kernel.org/r/20241101030902.579789-5-quic_qianyu@quicinc.com
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: <stable@vger.kernel.org> # 6.9
The SC8280XP PCIe devicetree nodes do not specify an 'iommu-map' so
the config_sid() callback is effectively a no-op.
Hence introduce a new ops struct, namely ops_1_21_0 which is same as
ops_1_9_0 except that it doesn't have config_sid() callback to clean
it up.
Link: https://lore.kernel.org/r/20241101030902.579789-4-quic_qianyu@quicinc.com
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
According to Section 2.2 of the PCI Express Card Electromechanical
Specification (Revision 5.1), in order to ensure that the power and the
reference clock are stable, PERST# has to be deasserted after a delay of
100 milliseconds (TPVPERL).
Currently, it is being assumed that the power is already stable, which
is not necessarily true.
Hence, change the delay to PCIE_T_PVPERL_MS to guarantee that power and
reference clock are stable.
Fixes: f3e25911a4 ("PCI: j721e: Add TI J721E PCIe driver")
Fixes: f96b697137 ("PCI: j721e: Use T_PERST_CLK_US macro")
Link: https://lore.kernel.org/r/20241104074420.1862932-1-s-vadapalli@ti.com
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Add the new IPQ9574 platform which is based on the Qcom IP rev. 1.27.0
and Synopsys IP rev. 5.80a.
The platform itself has four PCIe Gen3 controllers: two single-lane and
two dual-lane, all are based on Synopsys IP rev. 5.70a. As such, reuse
all the members of 'ops_2_9_0'.
Link: https://lore.kernel.org/r/20240801054803.3015572-5-quic_srichara@quicinc.com
Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
Signed-off-by: devi priya <quic_devipriy@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
TI's J722S SoC has one instance of PCIe namely PCIe0 which is a Gen3
single lane PCIe controller. Add support for the "ti,j722s-pcie-host"
compatible specific to J722S SoC.
Link: https://lore.kernel.org/r/20240524092349.158443-1-s-vadapalli@ti.com
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Currently, the endpoint cleanup function dw_pcie_ep_cleanup() and EPF
deinit notify function pci_epc_deinit_notify() are called during the
execution of pex_ep_event_pex_rst_assert() i.e., when the host has asserted
PERST#. But quickly after this step, refclk will also be disabled by the
host.
All of the tegra194 endpoint SoCs supported as of now depend on the refclk
from the host for keeping the controller operational. Due to this
limitation, any access to the hardware registers in the absence of refclk
will result in a whole endpoint crash. Unfortunately, most of the
controller cleanups require accessing the hardware registers (like eDMA
cleanup performed in dw_pcie_ep_cleanup(), etc...). So these cleanup
functions can cause the crash in the endpoint SoC once host asserts PERST#.
One way to address this issue is by generating the refclk in the endpoint
itself and not depending on the host. But that is not always possible as
some of the endpoint designs do require the endpoint to consume refclk from
the host.
Thus, fix this crash by moving the controller cleanups to the start of
the pex_ep_event_pex_rst_deassert() function. This function is called
whenever the host has deasserted PERST# and it is guaranteed that the
refclk would be active at this point. So at the start of this function
(after enabling resources) the controller cleanup can be performed. Once
finished, rest of the code execution for PERST# deassert can continue as
usual.
Fixes: 473b2cf9c4 ("PCI: endpoint: Introduce 'epc_deinit' event and notify the EPF drivers")
Fixes: 570d7715ee ("PCI: dwc: ep: Introduce dw_pcie_ep_cleanup() API for drivers supporting PERST#")
Link: https://lore.kernel.org/r/20240817-pci-qcom-ep-cleanup-v1-2-d6b958226559@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Vidya Sagar <vidyas@nvidia.com>
Cc: linux-tegra@vger.kernel.org
Currently, the endpoint cleanup function dw_pcie_ep_cleanup() and EPF
deinit notify function pci_epc_deinit_notify() are called during the
execution of qcom_pcie_perst_assert() i.e., when the host has asserted
PERST#. But quickly after this step, refclk will also be disabled by the
host.
All of the Qcom endpoint SoCs supported as of now depend on the refclk from
the host for keeping the controller operational. Due to this limitation,
any access to the hardware registers in the absence of refclk will result
in a whole endpoint crash. Unfortunately, most of the controller cleanups
require accessing the hardware registers (like eDMA cleanup performed in
dw_pcie_ep_cleanup(), powering down MHI EPF etc...). So these cleanup
functions are currently causing the crash in the endpoint SoC once host
asserts PERST#.
One way to address this issue is by generating the refclk in the endpoint
itself and not depending on the host. But that is not always possible as
some of the endpoint designs do require the endpoint to consume refclk from
the host (as I was told by the Qcom engineers).
Thus, fix this crash by moving the controller cleanups to the start of
the qcom_pcie_perst_deassert() function. qcom_pcie_perst_deassert() is
called whenever the host has deasserted PERST# and it is guaranteed that
the refclk would be active at this point. So at the start of this function
(after enabling resources), the controller cleanup can be performed. Once
finished, rest of the code execution for PERST# deassert can continue as
usual.
Fixes: 473b2cf9c4 ("PCI: endpoint: Introduce 'epc_deinit' event and notify the EPF drivers")
Fixes: 570d7715ee ("PCI: dwc: ep: Introduce dw_pcie_ep_cleanup() API for drivers supporting PERST#")
Link: https://lore.kernel.org/r/20240817-pci-qcom-ep-cleanup-v1-1-d6b958226559@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Currently, if 'Global IRQ' is supported by the platform, only the Link up
interrupt is enabled in the PARF_INT_ALL_MASK register. This masks MSIs
on some platforms. The MSI bits in PARF_INT_ALL_MASK register are enabled
by default in the hardware, but commit 4581403f67 ("PCI: qcom: Enumerate
endpoints based on Link up event in 'global_irq' interrupt") disabled them
and enabled only the Link up interrupt. While MSI continued to work on the
SM8450 platform that was used to test the offending commit, on other
platforms like SM8250, X1E80100, MSIs are getting masked. And they require
enabling the MSI interrupt bits in the register to unmask (enable) the
MSIs.
Even though the MSI interrupt enable bits in PARF_INT_ALL_MASK are
described as 'diagnostic' interrupts in the internal documentation,
disabling them masks MSI on these platforms. Due to this, MSIs were not
reported to be received these platforms while supporting 'Global IRQ'.
So, enable the MSI interrupts along with the Link up interrupt in the
PARF_INT_ALL_MASK register if 'Global IRQ' is supported. This ensures that
the MSIs continue to work and also the driver is able to catch the Link
up interrupt for enumerating endpoint devices.
Fixes: 4581403f67 ("PCI: qcom: Enumerate endpoints based on Link up event in 'global_irq' interrupt")
Closes: https://lore.kernel.org/linux-pci/9a692c98-eb0a-4d86-b642-ea655981ff53@kernel.org/
Link: https://lore.kernel.org/r/20241007051255.4378-1-manivannan.sadhasivam@linaro.org
Reported-by: Konrad Dybcio <konradybcio@kernel.org>
Tested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> # SL7
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Qiang Yu <quic_qianyu@quicinc.com>
Clear the address mapped (outbound_addr array) in dw_pcie_ep_unmap_addr(),
to ensure that dw_pcie_find_index() does not match an ATU index that was
already unmapped.
This is in addition to clearing the ATU index bit in ob_window_map.
Link: https://lore.kernel.org/linux-pci/20241004141000.5080-1-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Convert open-coded resource size calculations to use
resource_set_{range,size}() helpers.
While at it, use SZ_* for size parameter where appropriate which makes the
intent of code more obvious.
Also, cast sizes to resource_size_t, not u64.
Link: https://lore.kernel.org/r/20240614100606.15830-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
After commit 0edb555a65 ("platform: Make platform_driver::remove() return
void") .remove() is (again) the right callback to implement for platform
drivers.
Convert all PCI controller drivers to use .remove(), with the eventual goal
to drop struct platform_driver::remove_new(). As .remove() and .remove_new()
have the same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
Link: https://lore.kernel.org/r/20240923065706.728769-1-sergio.paracuellos@gmail.com
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
[bhelgaas: add pcie-xilinx-nwl.c and tidy whitespace per Uwe Kleine-König:
https://lore.kernel.org/r/tdxrmmqyzcufupnwkdbg7lwgadizm7v3lxjirykijbml7x54ze@upbdzycdsilm]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
-----BEGIN PGP SIGNATURE-----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=L3s9
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Wait for device readiness after reset by polling Vendor ID and
looking for Configuration RRS instead of polling the Command
register and looking for non-error completions, to avoid hardware
retries done for RRS on non-Vendor ID reads (Bjorn Helgaas)
- Rename CRS Completion Status to RRS ('Request Retry Status') to
match PCIe r6.0 spec usage (Bjorn Helgaas)
- Clear LBMS bit after a manual link retrain so we don't try to
retrain a link when there's no downstream device anymore (Maciej W.
Rozycki)
- Revert to the original link speed after retraining fails instead of
leaving it restricted to 2.5GT/s, so a future device has a chance
to use higher speeds (Maciej W. Rozycki)
- Wait for each level of downstream bus, not just the first, to
become accessible before restoring devices on that bus (Ilpo
Järvinen)
- Add ARCH_PCI_DEV_GROUPS so s390 can add its own attribute_groups
without having to stomp on the core's pdev->dev.groups (Lukas
Wunner)
Driver binding:
- Export pcim_request_region(), a managed counterpart of
pci_request_region(), for use by drivers (Philipp Stanner)
- Export pcim_iomap_region() and deprecate pcim_iomap_regions()
(Philipp Stanner)
- Request the PCI BAR used by xboxvideo (Philipp Stanner)
- Request and map drm/ast BARs with pcim_iomap_region() (Philipp
Stanner)
MSI:
- Add MSI_FLAG_NO_AFFINITY flag for devices that mux MSIs onto a
single IRQ line and cannot set the affinity of each MSI to a
specific CPU core (Marek Vasut)
- Use MSI_FLAG_NO_AFFINITY and remove unnecessary .irq_set_affinity()
implementations in aardvark, altera, brcmstb, dwc, mediatek-gen3,
mediatek, mobiveil, plda, rcar, tegra, vmd, xilinx-nwl,
xilinx-xdma, and xilinx drivers to avoid 'IRQ: set affinity failed'
warnings (Marek Vasut)
Power management:
- Add pwrctl support for ATH11K inside the WCN6855 package (Konrad
Dybcio)
PCI device hotplug:
- Remove unnecessary hpc_ops struct from shpchp (ngn)
- Check for PCI_POSSIBLE_ERROR(), not 0xffffffff, in cpqphp
(weiyufeng)
Virtualization:
- Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson)
- Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS
but does provide ACS-like features (Subramanian Ananthanarayanan)
IOMMU:
- Add function 0 DMA alias quirk for Glenfly Arise audio function,
which uses the function 0 Requester ID (WangYuli)
NPEM:
- Add Native PCIe Enclosure Management (NPEM) support for sysfs
control of NVMe RAID storage indicators (ok/fail/locate/
rebuild/etc) (Mariusz Tkaczyk)
- Add support for the ACPI _DSM PCIe SSD status LED management, which
is functionally similar to NPEM but mediated by platform firmware
(Mariusz Tkaczyk)
Device trees:
- Drop minItems and maxItems from ranges in PCI generic host binding
since host bridges may have several MMIO and I/O port apertures
(Frank Li)
- Add kirin, rcar-gen2, uniphier DT binding top-level constraints for
clocks (Krzysztof Kozlowski)
Altera PCIe controller driver:
- Convert altera DT bindings from text to YAML (Matthew Gerlach)
- Replace TLP_REQ_ID() with macro PCI_DEVID(), which does the same
thing and is what other drivers use (Jinjie Ruan)
Broadcom STB PCIe controller driver:
- Add DT binding maxItems for reset controllers (Jim Quinlan)
- Use the 'bridge' reset method if described in the DT (Jim Quinlan)
- Use the 'swinit' reset method if described in the DT (Jim Quinlan)
- Add 'has_phy' so the existence of a 'rescal' reset controller
doesn't imply software control of it (Jim Quinlan)
- Add support for many inbound DMA windows (Jim Quinlan)
- Rename SoC 'type' to 'soc_base' express the fact that SoCs come in
families of multiple similar devices (Jim Quinlan)
- Add Broadcom 7712 DT description and driver support (Jim Quinlan)
- Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings for
maintainability (Bjorn Helgaas)
Freescale i.MX6 PCIe controller driver:
- Add imx6q-pcie 'dbi2' and 'atu' reg-names for i.MX8M Endpoints
(Richard Zhu)
- Fix a code restructuring error that caused i.MX8MM and i.MX8MP
Endpoints to fail to establish link (Richard Zhu)
- Fix i.MX8MP Endpoint occasional failure to trigger MSI by enforcing
outbound alignment requirement (Richard Zhu)
- Call phy_power_off() in the .probe() error path (Frank Li)
- Rename internal names from imx6_* to imx_* since i.MX7/8/9 are also
supported (Frank Li)
- Manage Refclk by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Manage core reset by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Expand comments for erratum ERR010728 workaround (Frank Li)
- Use generic PHY APIs to configure mode, speed, and submode, which
is harmless for devices that implement their own internal PHY
management and don't set the generic imx_pcie->phy (Frank Li)
- Add i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) DT binding and driver
Root Complex support (Richard Zhu)
Freescale Layerscape PCIe controller driver:
- Replace layerscape-pcie DT binding compatible fsl,lx2160a-pcie with
fsl,lx2160ar2-pcie (Frank Li)
- Add layerscape-pcie DT binding deprecated 'num-viewport' property
to address a DT checker warning (Frank Li)
- Change layerscape-pcie DT binding 'fsl,pcie-scfg' to phandle-array
(Frank Li)
Loongson PCIe controller driver:
- Increase max PCI hosts to 8 for Loongson-3C6000 and newer chipsets
(Huacai Chen)
Marvell Aardvark PCIe controller driver:
- Fix issue with emulating Configuration RRS for two-byte reads of
Vendor ID; previously it only worked for four-byte reads (Bjorn
Helgaas)
MediaTek PCIe Gen3 controller driver:
- Add per-SoC struct mtk_gen3_pcie_pdata to support multiple SoC
types (Lorenzo Bianconi)
- Use reset_bulk APIs to manage PHY reset lines (Lorenzo Bianconi)
- Add DT and driver support for Airoha EN7581 PCIe controller
(Lorenzo Bianconi)
Qualcomm PCIe controller driver:
- Update qcom,pcie-sc7280 DT binding with eight interrupts (Rayyan
Ansari)
- Add back DT 'vddpe-3v3-supply', which was incorrectly removed
earlier (Johan Hovold)
- Drop endpoint redundant masking of global IRQ events (Manivannan
Sadhasivam)
- Clarify unknown global IRQ message and only log it once to avoid a
flood (Manivannan Sadhasivam)
- Add 'linux,pci-domain' property to endpoint DT binding (Manivannan
Sadhasivam)
- Assign PCI domain number for endpoint controllers (Manivannan
Sadhasivam)
- Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for
endpoint controller (Manivannan Sadhasivam)
- Add global SPI interrupt for PCIe link events to DT binding
(Manivannan Sadhasivam)
- Add global RC interrupt handler to handle 'Link up' events and
automatically enumerate hot-added devices (Manivannan Sadhasivam)
- Avoid mirroring of DBI and iATU register space so it doesn't
overlap BAR MMIO space (Prudhvi Yarlagadda)
- Enable controller resources like PHY only after PERST# is
deasserted to partially avoid the problem that the endpoint SoC
crashes when accessing things when Refclk is absent (Manivannan
Sadhasivam)
- Add 16.0 GT/s equalization and RX lane margining settings (Shashank
Babu Chinta Venkata)
- Pass domain number to pci_bus_release_domain_nr() explicitly to
avoid a NULL pointer dereference (Manivannan Sadhasivam)
Renesas R-Car PCIe controller driver:
- Make the read-only const array 'check_addr' static (Colin Ian King)
- Add R-Car V4M (R8A779H0) PCIe host and endpoint to DT binding
(Yoshihiro Shimoda)
TI DRA7xx PCIe controller driver:
- Request IRQF_ONESHOT for 'dra7xx-pcie-main' IRQ since the primary
handler is NULL (Siddharth Vadapalli)
- Handle IRQ request errors during root port and endpoint probe
(Siddharth Vadapalli)
TI J721E PCIe driver:
- Add DT 'ti,syscon-acspcie-proxy-ctrl' and driver support to enable
the ACSPCIE module to drive Refclk for the Endpoint (Siddharth
Vadapalli)
- Extract the cadence link setup from cdns_pcie_host_setup() so link
setup can be done separately during resume (Thomas Richard)
- Add T_PERST_CLK_US definition for the mandatory delay between
Refclk becoming stable and PERST# being deasserted (Thomas Richard)
- Add j721e suspend and resume support (Théo Lebrun)
TI Keystone PCIe controller driver:
- Fix NULL pointer checking when applying MRRS limitation quirk for
AM65x SR 1.0 Errata #i2037 (Dan Carpenter)
Xilinx NWL PCIe controller driver:
- Fix off-by-one error in INTx IRQ handler that caused INTx
interrupts to be lost or delivered as the wrong interrupt (Sean
Anderson)
- Rate-limit misc interrupt messages (Sean Anderson)
- Turn off the clock on probe failure and device removal (Sean
Anderson)
- Add DT binding and driver support for enabling/disabling PHYs (Sean
Anderson)
- Add PCIe phy bindings for the ZCU102 (Sean Anderson)
Xilinx XDMA PCIe controller driver:
- Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT
binding and xilinx-dma-pl driver (Thippeswamy Havalige)
Miscellaneous:
- Fix buffer overflow in kirin_pcie_parse_port() (Alexandra Diupina)
- Fix minor kerneldoc issues and typos (Bjorn Helgaas)
- Use PCI_DEVID() macro in aer_inject() instead of open-coding it
(Jinjie Ruan)
- Check pcie_find_root_port() return in x86 fixups to avoid NULL
pointer dereferences (Samasth Norway Ananda)
- Make pci_bus_type constant (Kunwu Chan)
- Remove unused declarations of __pci_pme_wakeup() and
pci_vpd_release() (Yue Haibing)
- Remove any leftover .*.cmd files with make clean (zhang jiao)
- Remove unused BILLION macro (zhang jiao)"
* tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (132 commits)
PCI: Fix typos
dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' again
tools: PCI: Remove unused BILLION macro
tools: PCI: Remove .*.cmd files with make clean
PCI: Pass domain number to pci_bus_release_domain_nr() explicitly
PCI: dra7xx: Fix error handling when IRQ request fails in probe
PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQ
PCI: qcom: Add RX lane margining settings for 16.0 GT/s
PCI: qcom: Add equalization settings for 16.0 GT/s
PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed
PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed'
PCI: qcom-ep: Enable controller resources like PHY only after refclk is available
PCI: Mark Creative Labs EMU20k2 INTx masking as broken
dt-bindings: PCI: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint
dt-bindings: PCI: altera: msi: Convert to YAML
PCI: imx6: Add i.MX8Q PCIe Root Complex (RC) support
PCI: Rename CRS Completion Status to RRS
PCI: aardvark: Correct Configuration RRS checking
PCI: Wait for device readiness with Configuration RRS
PCI: brcmstb: Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings
...
- Fix off-by-one error in INTx IRQ handler that caused INTx interrupts to
be lost or delivered as the wrong interrupt (Sean Anderson)
- Rate-limit misc interrupt messages (Sean Anderson)
- Turn off the clock on probe failure and device removal (Sean Anderson)
- Add DT binding and driver support for enabling/disabling PHYs (Sean
Anderson)
- Add PCIe phy bindings for the ZCU102 (Sean Anderson)
- Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT binding
and xilinx-dma-pl driver (Thippeswamy Havalige)
* pci/controller/xilinx:
PCI: xilinx-xdma: Add Xilinx QDMA Root Port driver
dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx QDMA PCIe Root Port Bridge
arm64: zynqmp: Add PCIe phys property for ZCU102
PCI: xilinx-nwl: Add PHY support
dt-bindings: pci: xilinx-nwl: Add phys property
PCI: xilinx-nwl: Clean up clock on probe failure/removal
PCI: xilinx-nwl: Rate-limit misc interrupt messages
PCI: xilinx-nwl: Fix register misspelling
PCI: xilinx-nwl: Fix off-by-one in INTx IRQ handler
- Drop endpoint redundant masking of global IRQ events (Manivannan
Sadhasivam)
- Clarify unknown global IRQ message and only log it once to avoid a flood
(Manivannan Sadhasivam)
- Add Manivannan Sadhasivam as maintainer of qcom endpoint driver
(Manivannan Sadhasivam)
- Add 'linux,pci-domain' property to endpoint DT binding (Manivannan
Sadhasivam)
- Assign PCI domain number for endpoint controllers (Manivannan Sadhasivam)
- Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for endpoint
controller (Manivannan Sadhasivam)
- Add global SPI interrupt for PCIe link events to DT binding (Manivannan
Sadhasivam)
- Add global RC interrupt handler to handle 'Link up' events and
automatically enumerate hot-added devices (Manivannan Sadhasivam)
- Avoid mirroring of DBI and iATU register space so it doesn't overlap BAR
MMIO space (Prudhvi Yarlagadda)
- Enable controller resources like PHY only after PERST# is deasserted to
partially avoid the problem that the endpoint SoC crashes when accessing
things when Refclk is absent (Manivannan Sadhasivam)
- Rename dw_pcie.link_gen to max_link_speed to avoid ambiguity (Manivannan
Sadhasivam)
- Cache maximum link speed value in dw_pcie.max_link_speed for use by
vendor drivers (Manivannan Sadhasivam)
- Add 16.0 GT/s equalization and RX lane margining settings (Shashank Babu
Chinta Venkata)
- Pass domain number to pci_bus_release_domain_nr() explicitly to avoid a
NULL pointer dereference (Manivannan Sadhasivam)
* pci/controller/qcom:
PCI: Pass domain number to pci_bus_release_domain_nr() explicitly
PCI: qcom: Add RX lane margining settings for 16.0 GT/s
PCI: qcom: Add equalization settings for 16.0 GT/s
PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed
PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed'
PCI: qcom-ep: Enable controller resources like PHY only after refclk is available
PCI: qcom: Disable mirroring of DBI and iATU register space in BAR region
PCI: qcom: Enumerate endpoints based on Link up event in 'global_irq' interrupt
dt-bindings: PCI: qcom,pcie-sm8450: Add 'global' interrupt
PCI: qcom-ep: Modify 'global_irq' and 'perst_irq' IRQ device names
PCI: endpoint: Assign PCI domain number for endpoint controllers
dt-bindings: PCI: pci-ep: Document 'linux,pci-domain' property
dt-bindings: PCI: pci-ep: Update Maintainers
PCI: qcom-ep: Reword the error message for receiving unknown global IRQ event
PCI: qcom-ep: Drop the redundant masking of global IRQ events
- Add DT "ti,syscon-acspcie-proxy-ctrl" and driver support to enable the
ACSPCIE module to drive Refclk for the Endpoint (Siddharth Vadapalli)
- Extract the cadence link setup from cdns_pcie_host_setup() so link setup
can be done separately during resume (Thomas Richard)
- Use dev_err_probe() to simplify j721e probe (Thomas Richard)
- Add T_PERST_CLK_US definition for the mandatory delay between Refclk
becoming stable and PERST# being deasserted (Thomas Richard)
- Add j721e suspend and resume support (Théo Lebrun)
* pci/controller/j721e:
PCI: j721e: Add suspend and resume support
PCI: j721e: Use T_PERST_CLK_US macro
PCI: Add T_PERST_CLK_US macro
PCI: j721e: Add reset GPIO to struct j721e_pcie
PCI: j721e: Use dev_err_probe() in the probe() function
PCI: cadence: Set cdns_pcie_host_init() global
PCI: cadence: Extract link setup sequence from cdns_pcie_host_setup()
PCI: j721e: Enable ACSPCIE Refclk if "ti,syscon-acspcie-proxy-ctrl" exists
dt-bindings: PCI: ti,j721e-pci-host: Add ACSPCIE proxy control property
- Fix a code restructuring error that caused i.MX8MM and i.MX8MP Endpoints
to fail to establish link (Richard Zhu)
- Fix i.MX8MP Endpoint occasional failure to trigger MSI by enforcing
outbound alignment requirement (Richard Zhu)
- Call phy_power_off() in the .probe() error path (Frank Li)
- Rename internal names from imx6_* to imx_* since i.MX7/8/9 are also
supported (Frank Li)
- Manage Refclk by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Manage core reset by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Expand comments for erratum ERR010728 workaround (Frank Li)
- Use generic PHY APIs to configure mode, speed, and submode, which is
harmless for devices that implement their own internal PHY management and
don't set the generic imx_pcie->phy (Frank Li)
- Add i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) DT binding and driver Root
Complex support (Richard Zhu)
* pci/controller/imx6:
PCI: imx6: Add i.MX8Q PCIe Root Complex (RC) support
PCI: imx6: Call common PHY API to set mode, speed, and submode
dt-bindings: PCI: imx6q-pcie: Add i.MX8Q PCIe compatible string
PCI: imx6: Consolidate redundant if-checks
PCI: imx6: Improve comment for workaround ERR010728
PCI: imx6: Simplify switch-case logic by involve core_reset callback
PCI: imx6: Introduce SoC specific callbacks for controlling REFCLK
PCI: imx6: Rename imx6_* with imx_*
PCI: imx6: Fix missing call to phy_power_off() in error handling
PCI: imx6: Fix i.MX8MP PCIe EP's occasional failure to trigger MSI
PCI: imx6: Fix establish link failure in EP mode for i.MX8MM and i.MX8MP
- Request IRQF_ONESHOT for 'dra7xx-pcie-main' IRQ since the primary handler
is NULL (Siddharth Vadapalli)
- Handle IRQ request errors during root port and endpoint probe (Siddharth
Vadapalli)
* pci/controller/dra7xx:
PCI: dra7xx: Fix error handling when IRQ request fails in probe
PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQ
- Change DT binding maintainer to Jim Quinlan (Jim Quinlan)
- Add DT binding maxItems for reset controllers (Jim Quinlan)
- Refactor .probe() error handling (Jim Quinlan)
- Use the 'bridge' reset method if described in the DT (Jim Quinlan)
- Use the 'swinit' reset method if described in the DT (Jim Quinlan)
- Add SoC-specific HARD_DEBUG, INTR2_CPU_BASE register offsets (Jim
Quinlan)
- Drop unused RGR1_SW_INIT_1_INIT_MASK, RGR1_SW_INIT_1_INIT_SHIFT offsets
(Jim Quinlan)
- Add 'has_phy' so the existence of a 'rescal' reset controller doesn't
imply software control of it (Jim Quinlan)
- Add support for many inbound DMA windows (Jim Quinlan)
- Check return values of all reset_control_*() calls (Jim Quinlan)
- Rename SoC 'type' to 'soc_base' express the fact that SoCs come in
families of multiple similar devices (Jim Quinlan)
- Add Broadcom 7712 DT description and driver support (Jim Quinlan)
- Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings for
maintainability (Bjorn Helgaas)
* pci/controller/brcmstb:
PCI: brcmstb: Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings
PCI: brcmstb: Enable 7712 SoCs
PCI: brcmstb: Change field name from 'type' to 'soc_base'
PCI: brcmstb: Check return value of all reset_control_* calls
PCI: brcmstb: Refactor for chips with many regular inbound windows
PCI: brcmstb: Don't conflate the reset rescal with PHY ctrl
PCI: brcmstb: Remove two unused constants from driver
PCI: brcmstb: PCI: brcmstb: Make HARD_DEBUG, INTR2_CPU_BASE offsets SoC-specific
PCI: brcmstb: Use swinit reset if available
PCI: brcmstb: Use bridge reset if available
PCI: brcmstb: Use common error handling code in brcm_pcie_probe()
dt-bindings: PCI: brcm,stb-pcie: Add 7712 SoC description
dt-bindings: PCI: brcm,stb-pcie: Use maxItems for reset controllers
dt-bindings: PCI: brcm,stb-pcie: Change brcmstb maintainer and cleanup
- Replace TLP_REQ_ID() with macro PCI_DEVID(), which does the same thing
and is what other drivers use (Jinjie Ruan)
* pci/controller/altera:
PCI: altera: Replace TLP_REQ_ID() with macro PCI_DEVID()
Commit d4c7d1a089 ("PCI: dwc: dra7xx: Push request_irq()
call to the bottom of probe") moved the IRQ request for
"dra7xx-pcie-main" towards the end of dra7xx_pcie_probe().
However, the error handling does not take into account the
initialization performed by either dra7xx_add_pcie_port() or
dra7xx_add_pcie_ep(), depending on the mode of operation.
Fix the error handling to address this.
Fixes: d4c7d1a089 ("PCI: dwc: dra7xx: Push request_irq() call to the bottom of probe")
Link: https://lore.kernel.org/linux-pci/20240827122422.985547-3-s-vadapalli@ti.com
Tested-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: stable@vger.kernel.org
Commit da87d35a6e ("PCI: dra7xx: Use threaded IRQ handler for
"dra7xx-pcie-main" IRQ") switched from devm_request_irq() to
devm_request_threaded_irq() for the "dra7xx-pcie-main" interrupt.
Since the primary handler was set to NULL, the "IRQF_ONESHOT" flag
should have also been set. Fix this.
Fixes: da87d35a6e ("PCI: dra7xx: Use threaded IRQ handler for "dra7xx-pcie-main" IRQ")
Suggested-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/linux-pci/20240827122422.985547-2-s-vadapalli@ti.com
Reported-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: stable@vger.kernel.org
Add RX lane margining settings for 16.0 GT/s (GEN 4) data rate.
These settings improve link stability while operating at high date
rates and helps to improve signal quality.
Link: https://lore.kernel.org/linux-pci/20240911-pci-qcom-gen4-stability-v7-4-743f5c1fd027@linaro.org
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Shashank Babu Chinta Venkata <quic_schintav@quicinc.com>
[mani: dropped the code refactoring and minor changes]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
During high data transmission rates such as 16.0 GT/s, there is an
increased risk of signal loss due to poor channel quality and
interference. This can impact receiver's ability to capture signals
accurately.
Hence, as signal compensation is achieved through appropriate lane
equalization, apply lane equalization settings at both transmitter
and receiver which results in an increase in the PCIe signal strength.
While at it, modify the pcie-tegra194 driver to make use of the
common GEN3_EQ_CONTROL_OFF definitions in pcie-designware.h.
Link: https://lore.kernel.org/linux-pci/20240911-pci-qcom-gen4-stability-v7-3-743f5c1fd027@linaro.org
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Shashank Babu Chinta Venkata <quic_schintav@quicinc.com>
[mani: dropped the code refactoring and minor changes]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Currently, the dw_pcie::max_link_speed has a valid value only if the
controller driver restricts the maximum link speed in the driver or if
the platform does so in the devicetree using the 'max-link-speed'
property.
But having the maximum supported link speed of the platform would be
helpful for the vendor drivers to configure any link specific settings.
So in the case of non-valid value in dw_pcie::max_link_speed, just cache
the hardware default value from Link Capability register.
While at it, remove the 'max_link_speed' argument to the
dw_pcie_link_set_max_speed() function since the value can be
retrieved within the function.
Link: https://lore.kernel.org/linux-pci/20240911-pci-qcom-gen4-stability-v7-2-743f5c1fd027@linaro.org
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
The 'link_gen' field is now holding the maximum supported link speed set
either by the controller driver or by DT through 'max-link-speed'
property.
However, the name 'link_gen' sounds like the negotiated link speed of
the PCIe link.
So rename it to 'max_link_speed' to make it clear that it holds the
maximum supported link speed of the controller.
Link: https://lore.kernel.org/linux-pci/20240911-pci-qcom-gen4-stability-v7-1-743f5c1fd027@linaro.org
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
qcom_pcie_enable_resources() is called by qcom_pcie_ep_probe() and it
enables the controller resources like clocks, regulator, PHY. On one of the
new unreleased Qcom SoC, PHY enablement depends on the active refclk. And
on all of the supported Qcom endpoint SoCs, refclk comes from the host
(RC). So calling qcom_pcie_enable_resources() without refclk causes the
NoC (Network On Chip) error in the endpoint SoC and in turn results in a
whole SoC crash and rebooting into EDL (Emergency Download) mode which is
an unrecoverable state.
But qcom_pcie_enable_resources() is already called by
qcom_pcie_perst_deassert() when PERST# is deasserted, and refclk is
available at that time.
Hence, remove the unnecessary call to qcom_pcie_enable_resources() from
qcom_pcie_ep_probe() to prevent the above mentioned crash.
It should be noted that this commit prevents the crash only under normal
working condition (booting endpoint before host), but the crash may also
occur if PERST# assert happens at the wrong time. For avoiding the crash
completely, it is recommended to use SRIS mode which allows the endpoint
SoC to generate its own refclk. The driver is not supporting SRIS mode
currently, but will be added in the future.
Fixes: 869bc52534 ("PCI: dwc: ep: Fix DBI access failure for drivers requiring refclk from host")
Link: https://lore.kernel.org/linux-pci/20240830082319.51387-1-manivannan.sadhasivam@linaro.org
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Implement i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) PCIe Root Complex
(RC) support. While the controller resembles that of i.MX8MP, the PHY
differs significantly. Also, there's a distinction between PCI bus
addresses and CPU addresses.
Introduce IMX_PCIE_FLAG_CPU_ADDR_FIXUP in drvdata::flags to indicate driver
need the cpu_addr_fixup() callback to facilitate CPU address to PCI bus
address conversion according to "ranges" property.
Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-11-b68ee5ef2b4d@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: check resource_list_first_type() for NULL]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
PCIe r6.0 changed the abbreviation for "Configuration Request Retry Status"
Completion Status from "CRS" to "RRS" and uses the terminology of
"Configuration RRS Software Visibility" instead of "CRS Software
Visibility".
Align the Linux usage with the r6.0 spec language. No functional change
intended.
It's confusing to make this change, but I think "RRS" *is* a better
abbreviation because it was easy to interpret "CRS" as "Completion Retry
Status", which really didn't make any sense.
Link: https://lore.kernel.org/r/20240827234848.4429-4-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Per PCIe r6.0, sec 2.3.2, when a Root Complex handles a Completion with
Request Retry Status for a Configuration Read Request that includes both
bytes of the Vendor ID field, it must complete the Request to the host by
returning 0001h for the Vendor ID and all 1's for any additional bytes.
Previously we only returned the 0001h Vendor ID value if we got an RRS
completion for reads of exactly 4 bytes. A read of 2 bytes would not
qualify, although the spec says it should.
Check for reads of 2 or more bytes including the Vendor ID.
I don't think this will fix any observable problems because RRS only
applies to the first config reads after reset, and those are all currently
dword (4-byte) reads.
Link: https://lore.kernel.org/r/20240827234848.4429-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Sort enum pcie_soc_base values.
Rename pcie_offsets_bmips_7425[] to pcie_offsets_bcm7425[] to match BCM7425
pcie_soc_base enum, bcm7425_cfg, and "brcm,bcm7425-pcie" .compatible
string.
Rename pcie_offset_bcm7278[] to pcie_offsets_bcm7278[] to match other
"pcie_offsets" names.
Rename pcie_offset_bcm7712[] to pcie_offsets_bcm7712[] to match other
"pcie_offsets" names.
Sort pcie_offsets_*[] by SoC name, move them all together, indent values
for easy reading.
Sort pcie_cfg_data structs by SoC name.
Sort .compatible strings by SoC name.
No functional change intended.
Link: https://lore.kernel.org/r/20240902205456.227409-1-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Invoke the common PHY API to configure mode, speed, and submode. While
these functions are optional in the PHY interface, they are necessary for
certain PHY drivers. Lack of support for these functions in a PHY driver
does not cause harm.
Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-10-b68ee5ef2b4d@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Consolidated redundant if-checks pertaining to imx_pcie->phy. Instead of
two separate checks, merged them into one to improve code readability.
Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-8-b68ee5ef2b4d@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Instead of using the switch case statement to assert/dassert the core
reset handled by this driver itself, let's introduce a new callback
core_reset() and define it for platforms that require it.
This simplifies the code.
Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-5-b68ee5ef2b4d@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Instead of using the switch case statement to enable/disable the
reference clock handled by this driver itself, let's introduce a new
callback enable_ref_clk() and define it for platforms that require it.
This simplifies the code.
Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-5-b68ee5ef2b4d@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Since this driver has evolved to support other i.MX SoCs such as
i.MX7/8/9, thus rename the 'imx6' prefix to 'imx' to avoid confusion.
The driver name is left unchanged to avoid breaking userspace.
Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-3-b68ee5ef2b4d@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log, refactor the IMX_* macros]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Fix missing call to phy_power_off() in the error path of
imx6_pcie_host_init(). Remove unnecessary check for imx6_pcie->phy
as the PHY API already handles NULL pointers.
Fixes: cbcf8722b5 ("phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on()")
Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-3-b68ee5ef2b4d@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: <stable@vger.kernel.org> # 6.1+
Correct occasional MSI triggering failures in i.MX8MP PCIe EP by applying
the correct hardware outbound alignment requirement.
The i.MX platform has a restriction about outbound address translation. The
pci-epc-mem uses page_size to manage it. Set the correct page_size for i.MX
platform to meet the hardware requirement, which is the same as inbound
address alignment.
Thus, align it with epc_features::align.
Fixes: 1bd0d43dcf ("PCI: imx6: Clean up addr_space retrieval code")
Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-2-b68ee5ef2b4d@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Jason Liu <jason.hui.liu@nxp.com>
Cc: <stable@vger.kernel.org> # 6.9+
Add IMX6_PCIE_FLAG_HAS_APP_RESET flag to IMX8MM_EP and IMX8MP_EP drvdata.
This flag was overlooked during code restructuring. It is crucial to
release the app-reset from the System Reset Controller before initiating
LTSSM to rectify the issue.
Fixes: 0c9651c21f ("PCI: imx6: Simplify reset handling by using *_FLAG_HAS_*_RESET")
Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-1-b68ee5ef2b4d@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: <stable@vger.kernel.org> # 6.9+
The Broadcom STB 7712 is the sibling chip of the RPi 5 (2712). It has
one PCIe controller with a single port, supports gen2 and one lane only.
The current revision of the chip is "C0" or "C1".
Link: https://lore.kernel.org/linux-pci/20240815225731.40276-14-james.quinlan@broadcom.com
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Stanimir Varbanov <svarbanov@suse.de>
The 'type' field used in the driver to discern SoC differences is
confusing; change it to the more apt 'soc_base'.
The 'base' is because some SoCs have the same characteristics as
previous SoCs so it is convenient to classify them in the same group.
Link: https://lore.kernel.org/linux-pci/20240815225731.40276-13-james.quinlan@broadcom.com
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Always check the return value for invocations of reset_control_xxx() and
propagate the error to the next level.
Although the current functions in reset-brcmstb.c cannot fail, this may
someday change.
Link: https://lore.kernel.org/linux-pci/20240815225731.40276-12-james.quinlan@broadcom.com
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Stanimir Varbanov <svarbanov@suse.de>
Provide support for new chips with multiple inbound windows while
keeping the legacy support for the older chips.
In existing chips there are three inbound windows with fixed purposes:
the first was for mapping SoC internal registers, the second was for
memory, and the third was for memory but with the endian swapped.
Typically, only one window was used.
Complicating the inbound window usage was the fact that the PCIe HW
would do a baroque internal mapping of system memory, and concatenate
the regions of multiple memory controllers.
Newer chips such as the 7712 and Cable Modem SoCs take a step forward
and drop the internal mapping while providing for multiple inbound
windows. This works in concert with the dma-ranges property, where each
provided range becomes an inbound window.
Link: https://lore.kernel.org/linux-pci/20240815225731.40276-11-james.quinlan@broadcom.com
Co-developed-by: Riyan Dhiman <riyandhiman14@gmail.com>
Signed-off-by: Riyan Dhiman <riyandhiman14@gmail.com>
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[kwilczynski: commit log, wrap code comments to 80 columns]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Stanimir Varbanov <svarbanov@suse.de>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Within kirin_pcie_parse_port(), the pcie->num_slots is compared to
pcie->gpio_id_reset size (MAX_PCI_SLOTS) which is correct and would lead
to an overflow.
Thus, fix condition to pcie->num_slots + 1 >= MAX_PCI_SLOTS and move
pcie->num_slots increment below the if-statement to avoid out-of-bounds
array access.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b22dbbb245 ("PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge")
Link: https://lore.kernel.org/linux-pci/20240903115823.30647-1-adiupina@astralinux.ru
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The TLP_REQ_ID's function is same as current PCI_DEVID()
macro, replace it.
No functional changes intended.
Link: https://lore.kernel.org/linux-pci/20240828104202.3683491-1-ruanjinjie@huawei.com
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add suspend and resume support. Only the Root Complex mode is supported.
During the suspend stage PERST# is asserted, then deasserted during the
resume stage.
Link: https://lore.kernel.org/linux-pci/20240102-j7200-pcie-s2r-v7-7-a2f9156da6c3@bootlin.com
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
[kwilczynski: commit log, update references to the PCI SIG specification]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Add a "has_phy" field indicating that the internal PHY has SW control
that requires configuration. Some previous chips only required the
firing of the "rescal" reset controller.
This change requires us to give the 7216 SoC its own cfg_data structure.
Link: https://lore.kernel.org/linux-pci/20240815225731.40276-10-james.quinlan@broadcom.com
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Stanimir Varbanov <svarbanov@suse.de>
Remove two constants in the driver which are no longer
used: RGR1_SW_INIT_1_INIT_MASK and RGR1_SW_INIT_1_INIT_SHIFT.
Link: https://lore.kernel.org/linux-pci/20240815225731.40276-9-james.quinlan@broadcom.com
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Stanimir Varbanov <svarbanov@suse.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Do preparatory work for the 7712 SoC, which is introduced in a
future commit.
Our HW design has changed two register offsets for the 7712, where
previously it was a common value for all Broadcom SoCs with PCIe
cores.
Specifically, the two offsets are to the registers HARD_DEBUG and
INTR2_CPU_BASE.
Link: https://lore.kernel.org/linux-pci/20240815225731.40276-8-james.quinlan@broadcom.com
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Stanimir Varbanov <svarbanov@suse.de>
The 7712 SoC adds a software init reset device for the PCIe HW.
If found in the DT node, use it.
Link: https://lore.kernel.org/linux-pci/20240815225731.40276-7-james.quinlan@broadcom.com
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The 7712 SoC has a bridge reset which can be described in the device
tree.
Use it if present. Otherwise, continue to use the legacy method to
reset the bridge.
Link: https://lore.kernel.org/linux-pci/20240815225731.40276-6-james.quinlan@broadcom.com
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[kwilczynski: commit log, refactored function brcm_pcie_bridge_sw_init_set_generic()]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Stanimir Varbanov <svarbanov@suse.de>
Refactor the error handling in the bottom half of the probe function
for readability.
The invocation of clk_prepare_enable() is moved lower in the function
and this simplifies a couple of return paths. The dev_err_probe() is
also used when it is apt.
Link: https://lore.kernel.org/linux-pci/20240815225731.40276-5-james.quinlan@broadcom.com
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Struct cdns_pcie_rc once had a .dev member, but it was removed by
bd22885aa1 ("PCI: cadence: Refactor driver to use as a core library").
Drop the extra kerneldoc for it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Struct mtk_pcie.mem was removed by 8a26f861b8 ("PCI: mediatek: Use
pci_parse_request_of_pci_ranges()"), but the kerneldoc was left. Remove
the extra kerneldoc.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add reset GPIO to struct j721e_pcie, so it can be used at suspend and
resume stages.
Link: https://lore.kernel.org/linux-pci/20240102-j7200-pcie-s2r-v7-4-a2f9156da6c3@bootlin.com
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Use dev_err_probe() instead of dev_err() in the probe() function to
simplify the code and standardize the error output.
Link: https://lore.kernel.org/linux-pci/20240102-j7200-pcie-s2r-v7-3-a2f9156da6c3@bootlin.com
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
During the resume sequence of the host, cdns_pcie_host_init() needs to be
called, so set it global.
The dev function parameter is removed, as it isn't used.
Link: https://lore.kernel.org/linux-pci/20240102-j7200-pcie-s2r-v7-2-a2f9156da6c3@bootlin.com
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
The function cdns_pcie_host_setup() mixes probe structure and link setup.
The link setup must be done during the resume sequence. So extract it from
cdns_pcie_host_setup() and create a dedicated function.
Link: https://lore.kernel.org/linux-pci/20240102-j7200-pcie-s2r-v7-1-a2f9156da6c3@bootlin.com
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Introduce support for Airoha EN7581 PCIe controller to mediatek-gen3
PCIe controller driver.
Link: https://lore.kernel.org/linux-pci/aca00bd672ee576ad96d279414fc0835ff31f637.1720022580.git.lorenzo@kernel.org
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Tested-by: Zhengping Zhang <zhengping.zhang@airoha.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Jianjun Wang <jianjun.wang@mediatek.com>
Use reset_bulk APIs to manage PHY reset lines.
This is a preliminary patch in order to add Airoha EN7581 PCIe support.
Link: https://lore.kernel.org/linux-pci/3ceb83bc0defbcf868521f8df4b9100e55ec2614.1720022580.git.lorenzo@kernel.org
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Tested-by: Zhengping Zhang <zhengping.zhang@airoha.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Jianjun Wang <jianjun.wang@mediatek.com>
Introduce mtk_gen3_pcie_pdata data structure in order to define
multiple callbacks for each supported SoC.
This is a preliminary patch to introduce EN7581 PCIe support.
Link: https://lore.kernel.org/linux-pci/c193d1a87505d045e2e0ef33317bce17012ee095.1720022580.git.lorenzo@kernel.org
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Tested-by: Zhengping Zhang <zhengping.zhang@airoha.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Jianjun Wang <jianjun.wang@mediatek.com>
Don't populate the const read-only array check_addr on the stack at
run time, instead make it static.
Link: https://lore.kernel.org/linux-pci/20240822205941.643187-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
[kwilczynski: refactor array definition]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
The code in vmd_shutdown() had an indentation issue where spaces were
used instead of tabs. This commit corrects the indentation to use tabs,
adhering to the Linux kernel coding style guidelines.
Issue reported by the checkpatch.pl script:
ERROR: code indent should use tabs where possible
#1056: FILE: drivers/pci/controller/vmd.c:1056:
+ struct vmd_dev *vmd = pci_get_drvdata(dev);$
WARNING: please, no spaces at the start of a line
#1056: FILE: drivers/pci/controller/vmd.c:1056:
+ struct vmd_dev *vmd = pci_get_drvdata(dev);$
ERROR: code indent should use tabs where possible
#1058: FILE: drivers/pci/controller/vmd.c:1058:
+ vmd_remove_irq_domain(vmd);$
WARNING: please, no spaces at the start of a line
#1058: FILE: drivers/pci/controller/vmd.c:1058:
+ vmd_remove_irq_domain(vmd);$
No functional changes are intended.
Link: https://lore.kernel.org/linux-pci/20240901092602.17414-1-riyandhiman14@gmail.com
Signed-off-by: Riyan Dhiman <riyandhiman14@gmail.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
PARF hardware block which is a wrapper on top of DWC PCIe controller
mirrors the DBI and ATU register space. It uses PARF_SLV_ADDR_SPACE_SIZE
register to get the size of the memory block to be mirrored and uses
PARF_DBI_BASE_ADDR, PARF_ATU_BASE_ADDR registers to determine the base
address of DBI and ATU space inside the memory block that is being
mirrored.
When a memory region which is located above the SLV_ADDR_SPACE_SIZE
boundary is used for BAR region then there could be an overlap of DBI and
ATU address space that is getting mirrored and the BAR region. This
results in DBI and ATU address space contents getting updated when a PCIe
function driver tries updating the BAR/MMIO memory region. Reference
memory map of the PCIe memory region with DBI and ATU address space
overlapping BAR region is as below.
|---------------|
| |
| |
------- --------|---------------|
| | |---------------|
| | | DBI |
| | |---------------|---->DBI_BASE_ADDR
| | | |
| | | |
| PCIe | |---->2*SLV_ADDR_SPACE_SIZE
| BAR/MMIO|---------------|
| Region | ATU |
| | |---------------|---->ATU_BASE_ADDR
| | | |
PCIe | |---------------|
Memory | | DBI |
Region | |---------------|---->DBI_BASE_ADDR
| | | |
| --------| |
| | |---->SLV_ADDR_SPACE_SIZE
| |---------------|
| | ATU |
| |---------------|---->ATU_BASE_ADDR
| | |
| |---------------|
| | DBI |
| |---------------|---->DBI_BASE_ADDR
| | |
| | |
----------------|---------------|
| |
| |
| |
|---------------|
Currently memory region beyond the SLV_ADDR_SPACE_SIZE boundary is not
used for BAR region which is why the above mentioned issue is not
encountered. This issue is discovered as part of internal testing when we
tried moving the BAR region beyond the SLV_ADDR_SPACE_SIZE boundary. Hence
we are trying to fix this.
As PARF hardware block mirrors DBI and ATU register space after every
PARF_SLV_ADDR_SPACE_SIZE (default 0x1000000) boundary multiple, program
maximum possible size to this register by writing 0x80000000 to it(it
considers only powers of 2 as values) to avoid mirroring DBI and ATU to
BAR/MMIO region. Write the physical base address of DBI and ATU register
blocks to PARF_DBI_BASE_ADDR (default 0x0) and PARF_ATU_BASE_ADDR (default
0x1000) respectively to make sure DBI and ATU blocks are at expected
memory locations.
The register offsets PARF_DBI_BASE_ADDR_V2, PARF_SLV_ADDR_SPACE_SIZE_V2
and PARF_ATU_BASE_ADDR are applicable for platforms that use Qcom IP
rev 1.9.0, 2.7.0 and 2.9.0. PARF_DBI_BASE_ADDR_V2 and
PARF_SLV_ADDR_SPACE_SIZE_V2 are applicable for Qcom IP rev 2.3.3.
PARF_DBI_BASE_ADDR and PARF_SLV_ADDR_SPACE_SIZE are applicable for Qcom
IP rev 1.0.0, 2.3.2 and 2.4.0. Update init()/post_init() functions of the
respective Qcom IP versions to program applicable PARF_DBI_BASE_ADDR,
PARF_SLV_ADDR_SPACE_SIZE and PARF_ATU_BASE_ADDR register offsets. Update
the SLV_ADDR_SPACE_SZ macro to 0x80000000 to set highest bit in
PARF_SLV_ADDR_SPACE_SIZE register.
Cache DBI and iATU physical addresses in 'struct dw_pcie' so that
pcie_qcom.c driver can program these addresses in the PARF_DBI_BASE_ADDR
and PARF_ATU_BASE_ADDR registers.
Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/linux-pci/20240814220338.1969668-1-quic_pyarlaga@quicinc.com
Signed-off-by: Prudhvi Yarlagadda <quic_pyarlaga@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Mayank Rana <quic_mrana@quicinc.com>
Historically, Qcom PCIe RC controllers lacked standard hotplug support. So
when an endpoint is attached to the SoC, users have to rescan the bus
manually to enumerate the device. But this can be avoided by using the Link
up event exposed by the Qcom specific 'global_irq' interrupt.
Qcom PCIe RC controllers are capable of generating the 'global' SPI
interrupt to the host CPUs. The device driver can use this interrupt to
identify events such as PCIe link specific events, safety events etc...
One such event is the PCIe Link up event generated when an endpoint is
detected on the bus and the Link is 'up'. This event can be used to
enumerate the PCIe endpoint devices without user intervention.
So add support for capturing the PCIe Link up event using the 'global'
interrupt in the driver. Once the Link up event is received, the bus
underneath the host bridge is scanned to enumerate PCIe endpoint devices.
All of the Qcom SoCs have only one Root Port per controller instance. So
only a single 'Link up' event is generated for the PCIe controller.
Link: https://lore.kernel.org/linux-pci/20240828-pci-qcom-hotplug-v4-11-263a385fbbcb@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Currently, the IRQ device name for both of these IRQs doesn't have Qcom
specific prefix and PCIe domain number. This causes 2 issues:
1. Pollutes the global IRQ namespace since 'global' is a common name.
2. When more than one EP controller instance is present in the SoC, naming
conflict will occur.
Hence, add 'qcom_pcie_ep_' prefix and PCIe domain number suffix to the IRQ
names to uniquely identify the IRQs and also to fix the above mentioned
issues.
Link: https://lore.kernel.org/linux-pci/20240828-pci-qcom-hotplug-v4-6-263a385fbbcb@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Current error message just prints the contents of PARF_INT_ALL_STATUS
register as if like the IRQ event number. It could mislead the users.
Reword it to make it clear that the error message is actually showing the
interrupt status register to help debug spurious IRQ events.
While at it, let's also switch over to dev_WARN_ONCE() so that any IRQ
storm won't flood the kernel log buffer.
Link: https://lore.kernel.org/linux-pci/20240828-pci-qcom-hotplug-v4-2-263a385fbbcb@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Once the events are disabled in PARF_INT_ALL_MASK register, only the
enabled events will generate global IRQ. So there is no need to do the
masking again in the IRQ handler, drop it.
If there are any spurious IRQs getting generated, they will be reported
using the existing dev_err() in the handler.
Link: https://lore.kernel.org/linux-pci/20240828-pci-qcom-hotplug-v4-1-263a385fbbcb@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
The ACSPCIE module is capable of driving the reference clock required by
the PCIe Endpoint device. It is an alternative to on-board and external
reference clock generators. Enabling the output from the ACSPCIE module's
PAD IO Buffers requires clearing the "PAD IO disable" bits of the
ACSPCIE_PROXY_CTRL register in the CTRL_MMR register space.
Add support to enable the ACSPCIE reference clock output using the optional
device-tree property "ti,syscon-acspcie-proxy-ctrl".
Link: https://lore.kernel.org/linux-pci/20240829105316.1483684-3-s-vadapalli@ti.com
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add support for Xilinx QDMA Soft IP core as Root Port.
The Versal Prime devices support QDMA soft IP module in programmable logic.
The integrated QDMA Soft IP block has integrated bridge function that can
act as PCIe Root Port.
Link: https://lore.kernel.org/linux-pci/20240811022345.1178203-3-thippesw@amd.com
Signed-off-by: Thippeswamy Havalige <thippesw@amd.com>
[kwilczynski: removed unused header]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add support for enabling/disabling PCIe PHYs. We can't really do
anything about failures in the disable/remove path, so just print an
error.
Link: https://lore.kernel.org/r/20240531161337.864994-7-sean.anderson@linux.dev
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The conditions logged by the misc interrupt can occur repeatedly and
continuously. Avoid rendering the console unusable by rate-limiting
these messages.
Link: https://lore.kernel.org/r/20240531161337.864994-5-sean.anderson@linux.dev
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
MSGF_LEG_MASK is laid out with INTA in bit 0, INTB in bit 1, INTC in bit 2,
and INTD in bit 3. Hardware IRQ numbers start at 0, and we register
PCI_NUM_INTX IRQs. So to enable INTA (aka hwirq 0) we should set bit 0.
Remove the subtraction of one.
This bug would cause INTx interrupts not to be delivered, as enabling INTB
would actually enable INTA, and enabling INTA wouldn't enable anything at
all. It is likely that this got overlooked for so long since most PCIe
hardware uses MSIs. This fixes the following UBSAN error:
UBSAN: shift-out-of-bounds in ../drivers/pci/controller/pcie-xilinx-nwl.c:389:11
shift exponent 18446744073709551615 is too large for 32-bit type 'int'
CPU: 1 PID: 61 Comm: kworker/u10:1 Not tainted 6.6.20+ #268
Hardware name: xlnx,zynqmp (DT)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
dump_backtrace (arch/arm64/kernel/stacktrace.c:235)
show_stack (arch/arm64/kernel/stacktrace.c:242)
dump_stack_lvl (lib/dump_stack.c:107)
dump_stack (lib/dump_stack.c:114)
__ubsan_handle_shift_out_of_bounds (lib/ubsan.c:218 lib/ubsan.c:387)
nwl_unmask_leg_irq (drivers/pci/controller/pcie-xilinx-nwl.c:389 (discriminator 1))
irq_enable (kernel/irq/internals.h:234 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345)
__irq_startup (kernel/irq/internals.h:239 kernel/irq/chip.c:180 kernel/irq/chip.c:250)
irq_startup (kernel/irq/chip.c:270)
__setup_irq (kernel/irq/manage.c:1800)
request_threaded_irq (kernel/irq/manage.c:2206)
pcie_pme_probe (include/linux/interrupt.h:168 drivers/pci/pcie/pme.c:348)
Fixes: 9a181e1093 ("PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts")
Link: https://lore.kernel.org/r/20240531161337.864994-3-sean.anderson@linux.dev
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
With commit 5b6272e0ef ("PCI: qcom: Add OPP support to scale
performance"), OPP was used to control the interconnect and power domains
if the platform supported OPP. Also to maintain the backward compatibility
with platforms not supporting OPP but just ICC, the above mentioned commit
assumed that if ICC was not available on the platform, it would resort to
OPP.
Unfortunately, some old platforms don't support either ICC or OPP. On those
platforms, resorting to OPP in the absence of ICC throws below errors from
OPP core during suspend and resume:
qcom-pcie 1c08000.pcie: dev_pm_opp_set_opp: device opp doesn't exist
qcom-pcie 1c08000.pcie: _find_key: OPP table not found (-19)
Also, it doesn't make sense to invoke the OPP APIs when OPP is not
supported by the platform at all.
Add a "use_pm_opp" flag to identify whether OPP is supported and use it to
control invoking the OPP APIs.
Fixes: 5b6272e0ef ("PCI: qcom: Add OPP support to scale performance")
Link: https://lore.kernel.org/linux-pci/20240722131128.32470-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mayank Rana <quic_mrana@quicinc.com>
SA8775P SoC has support for the hardware parity check feature on the MHI
RAM (entity that holds MHI registers, etc.) But due to a hardware bug in
the parity check logic, the data parity error interrupt is getting
generated all the time when using MHI. So the hardware team has suggested
disabling the parity check error to work around the hardware bug.
Mask the parity error interrupt in PARF_INT_ALL_5_MASK register.
Fixes: 58d0d3e032 ("PCI: qcom-ep: Add support for SA8775P SOC")
Link: https://lore.kernel.org/linux-pci/20240808063057.7394-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
This code accidentally uses && where || was intended. It potentially
results in a NULL dereference.
Thus, fix the if-statement expression to use the correct condition.
Fixes: 86f271f22b ("PCI: keystone: Add workaround for Errata #i2037 (AM65x SR 1.0)")
Link: https://lore.kernel.org/linux-pci/1b762a93-e1b2-4af3-8c04-c8843905c279@stanley.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows
migrate_one_irq() to exit right away, without warnings like this:
IRQ...: set affinity failed(-22)
Remove the .irq_set_affinity() implementation that is no longer needed.
Link: https://lore.kernel.org/r/20240723132958.41320-16-marek.vasut+renesas@mailbox.org
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows
migrate_one_irq() to exit right away, without warnings like this:
IRQ...: set affinity failed(-22)
Remove the .irq_set_affinity() implementation that is no longer needed.
Link: https://lore.kernel.org/r/20240723132958.41320-15-marek.vasut+renesas@mailbox.org
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows
migrate_one_irq() to exit right away, without warnings like this:
IRQ...: set affinity failed(-22)
Remove the .irq_set_affinity() implementation that is no longer needed.
Link: https://lore.kernel.org/r/20240723132958.41320-14-marek.vasut+renesas@mailbox.org
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows
migrate_one_irq() to exit right away, without warnings like this:
IRQ...: set affinity failed(-22)
Remove the .irq_set_affinity() implementation that is no longer needed.
Link: https://lore.kernel.org/r/20240723132958.41320-13-marek.vasut+renesas@mailbox.org
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows
migrate_one_irq() to exit right away, without warnings like this:
IRQ...: set affinity failed(-22)
Remove the .irq_set_affinity() implementation that is no longer needed.
Link: https://lore.kernel.org/r/20240723132958.41320-12-marek.vasut+renesas@mailbox.org
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows
migrate_one_irq() to exit right away, without warnings like this:
IRQ...: set affinity failed(-22)
Remove the .irq_set_affinity() implementation that is no longer needed.
Link: https://lore.kernel.org/r/20240723132958.41320-11-marek.vasut+renesas@mailbox.org
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows
migrate_one_irq() to exit right away, without warnings like this:
IRQ...: set affinity failed(-22)
Remove the .irq_set_affinity() implementation that is no longer needed.
Link: https://lore.kernel.org/r/20240723132958.41320-10-marek.vasut+renesas@mailbox.org
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows
migrate_one_irq() to exit right away, without warnings like this:
IRQ...: set affinity failed(-22)
Remove the .irq_set_affinity() implementation that is no longer needed.
Link: https://lore.kernel.org/r/20240723132958.41320-9-marek.vasut+renesas@mailbox.org
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows
migrate_one_irq() to exit right away, without warnings like this:
IRQ...: set affinity failed(-22)
Remove the .irq_set_affinity() implementation that is no longer needed.
Link: https://lore.kernel.org/r/20240723132958.41320-8-marek.vasut+renesas@mailbox.org
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Jianjun Wang <jianjun.wang@mediatek.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows
migrate_one_irq() to exit right away, without warnings like this:
IRQ...: set affinity failed(-22)
Remove the .irq_set_affinity() implementation that is no longer needed.
Link: https://lore.kernel.org/r/20240723132958.41320-7-marek.vasut+renesas@mailbox.org
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Jianjun Wang <jianjun.wang@mediatek.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows
migrate_one_irq() to exit right away, without warnings like this:
IRQ...: set affinity failed(-22)
Remove the .irq_set_affinity() implementation that is no longer needed.
Link: https://lore.kernel.org/r/20240723132958.41320-6-marek.vasut+renesas@mailbox.org
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows
migrate_one_irq() to exit right away, without warnings like this:
IRQ...: set affinity failed(-22)
Remove the .irq_set_affinity() implementation that is no longer needed.
Link: https://lore.kernel.org/r/20240723132958.41320-5-marek.vasut+renesas@mailbox.org
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows
migrate_one_irq() to exit right away, without warnings like this:
IRQ...: set affinity failed(-22)
Remove the .irq_set_affinity() implementation that is no longer needed.
Link: https://lore.kernel.org/r/20240723132958.41320-4-marek.vasut+renesas@mailbox.org
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows
migrate_one_irq() to exit right away, without warnings like this:
IRQ...: set affinity failed(-22)
Remove the .irq_set_affinity() implementation that is no longer needed.
Link: https://lore.kernel.org/r/20240723132958.41320-3-marek.vasut+renesas@mailbox.org
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
- Remove unused struct 'acpi_handle_node' (Dr. David Alan Gilbert)
- Use array notation for portdrv .id_table consistently (Masahiro Yamada)
- Switch to new Intel CPU model defines (Tony Luck)
- Add missing MODULE_DESCRIPTION() macros (Jeff Johnson)
* pci/misc:
PCI: controller: Add missing MODULE_DESCRIPTION() macros
PCI: Add missing MODULE_DESCRIPTION() macros
PCI/PM: Switch to new Intel CPU model defines
PCI: Use array for .id_table consistently
ACPI: PCI: Remove unused struct 'acpi_handle_node'
- Create "domain" symlink for vmd before adding devices below the VMD
bridge so it's available when mdadm assembles RAID devices from them
(Jiwei Sun)
* pci/controller/vmd:
PCI: vmd: Create domain symlink before pci_bus_add_devices()
- Ensure Tegra194 and Tegra234 inbound ATU entries are 64KB-aligned to
match the hardware restriction (Jon Hunter)
- Remove unused struct 'tegra_pcie_soc' (Dr. David Alan Gilbert)
* pci/controller/tegra194:
PCI: tegra: Remove unused struct 'tegra_pcie_soc'
PCI: tegra194: Set EP alignment restriction for inbound ATU
- Use dev_err_probe() in dw-rockchip probe error path so the failures
aren't silent (Uwe Kleine-König)
- Sleep PCIE_T_PVPERL_MS (100ms) before deasserting PERST# (Damien Le Moal)
- Sleep PCIE_T_RRS_READY_MS (100ms) after conventional reset, before a
config access (Damien Le Moal)
- Request the PERST# GPIO with GPIOD_OUT_LOW so it matches the POR value,
which avoids a spurious PERST# assertion and fixes a Qcom modem firmware
crash and issues with WLAN controllers, e.g., RTL8822CE (Manivannan
Sadhasivam for rockchip, Niklas Cassel for dw-rockchip)
- Refactor dw-rockchip and add support for Endpoint mode for rk3568 and
rk3588 (Niklas Cassel)
* pci/controller/rockchip:
PCI: dw-rockchip: Use pci_epc_init_notify() directly
PCI: dw-rockchip: Add endpoint mode support
PCI: dw-rockchip: Refactor the driver to prepare for EP mode
PCI: dw-rockchip: Add rockchip_pcie_get_ltssm() helper
PCI: dw-rockchip: Fix weird indentation
PCI: dw-rockchip: Fix initial PERST# GPIO value
PCI: dw-rockchip: Add error messages in .probe() error paths
PCI: rockchip: Use GPIOD_OUT_LOW flag while requesting ep_gpio
PCI: rockchip-host: Wait 100ms after reset before starting configuration
PCI: rockchip-host: Fix rockchip_pcie_host_init_port() PERST# handling
- Add Synopsys DWC macros for lane skew configuration (Yoshihiro Shimoda)
- Add struct rcar_gen4_pcie_drvdata to provide for future SoCs with
different initialization requirements (Yoshihiro Shimoda)
- Add .ltssm_control() method for SoC dependencies (Yoshihiro Shimoda)
- Add r8a779g0 (R-Car V4H) support (Yoshihiro Shimoda)
* pci/controller/rcar-gen4:
PCI: rcar-gen4: Add support for R-Car V4H
PCI: rcar-gen4: Add .ltssm_control() for other SoC support
PCI: rcar-gen4: Add struct rcar_gen4_pcie_drvdata
PCI: dwc: Add PCIE_PORT_{FORCE,LANE_SKEW} macros
- Demote WARN() to dev_warn_ratelimited() in rcar_pcie_wakeup() to avoid
excessive warnings when the driver is confused about link state when
resuming (Marek Vasut)
* pci/controller/rcar:
PCI: rcar: Demote WARN() to dev_warn_ratelimited() in rcar_pcie_wakeup()
- Use devm_clk_bulk_get_all() to get all the clocks from DT to avoid
writing out all the clock names (Manivannan Sadhasivam)
- Add DT binding and driver support for the SA8775P SoC (Mrinmay Sarkar)
- Refactor dw_pcie_edma_find_chip() to enable adding support for Hyper DMA
(HDMA) (Manivannan Sadhasivam)
- Enable drivers to supply the eDMA channel count since some can't auto
detect this (Manivannan Sadhasivam)
- Add HDMA support for the SA8775P SoC (Mrinmay Sarkar)
- Override the SA8775P NO_SNOOP default to avoid possible memory corruption
(Mrinmay Sarkar)
- Make sure resources are disabled during PERST# assertion, even if the
link is already disabled (Manivannan Sadhasivam)
- Vote for the CPU-PCIe ICC (interconnect) path to ensure it stays active
even if other drivers don't vote for it (Krishna chaitanya chundru)
- Add Operating Performance Points (OPP) to scale performance state based
on aggregate link bandwidth to improve SoC power efficiency (Krishna
chaitanya chundru)
- Return failure instead of success if dev_pm_opp_find_freq_floor() fails
(Dan Carpenter)
- Avoid an error pointer dereference if dev_pm_opp_find_freq_exact() fails
(Dan Carpenter)
- Prevent use of uninitialized data in qcom_pcie_suspend_noirq() (Dan
Carpenter)
* pci/controller/qcom:
PCI: qcom: Prevent use of uninitialized data in qcom_pcie_suspend_noirq()
PCI: qcom: Prevent potential error pointer dereference
PCI: qcom: Fix missing error code in qcom_pcie_probe()
PCI: qcom: Add OPP support to scale performance
PCI: Bring the PCIe speed to MBps logic to new pcie_dev_speed_mbps()
PCI: qcom: Add ICC bandwidth vote for CPU to PCIe path
PCI: qcom-ep: Disable resources unconditionally during PERST# assert
PCI: qcom-ep: Override NO_SNOOP attribute for SA8775P EP
PCI: qcom: Override NO_SNOOP attribute for SA8775P RC
PCI: epf-mhi: Enable HDMA for SA8775P SoC
PCI: qcom-ep: Add HDMA support for SA8775P SoC
PCI: dwc: Pass the eDMA mapping format flag directly from glue drivers
PCI: dwc: Skip finding eDMA channels count for HDMA platforms
PCI: dwc: Refactor dw_pcie_edma_find_chip() API
PCI: qcom-ep: Add support for SA8775P SOC
dt-bindings: PCI: qcom-ep: Add support for SA8775P SoC
PCI: qcom: Use devm_clk_bulk_get_all() API
- Move PLDA XpressRICH generic DT binding properties to
plda,xpressrich3-axi-common.yaml where they can be shared across
PLDA-based drivers (Minda Chen)
- Create a drivers/pci/controller/plda/ directory for PLDA-based drivers
and move pcie-microchip-host.c there (Minda Chen)
- Move PLDA generic macros to pcie-plda.h where they can be shared across
drivers (Minda Chen)
- Extract PLDA generic structures from pcie-microchip-host.c, rename them
to be generic, and move them to pcie-plda-host.c where they can be shared
across drivers (Minda Chen)
- Add a .request_event_irq() callback for requesting device-specific
interrupts in addition to PLDA-generic interrupts (Minda Chen)
- Add DT binding and driver for the StarFive JH7110 SoC, based on PLDA IP
(Minda Chen)
* pci/controller/microchip:
PCI: starfive: Add JH7110 PCIe controller
dt-bindings: PCI: Add StarFive JH7110 PCIe controller
PCI: Add PCIE_RESET_CONFIG_DEVICE_WAIT_MS waiting time value
PCI: plda: Pass pci_host_bridge to plda_pcie_setup_iomems()
PCI: plda: Add host init/deinit and map bus functions
PCI: plda: Add event bitmap field to struct plda_pcie_rp
PCI: microchip: Move IRQ functions to pcie-plda-host.c
PCI: microchip: Add event irqchip field to host port and add PLDA irqchip
PCI: microchip: Add get_events() callback and PLDA get_event()
PCI: microchip: Add INTx and MSI event num to struct plda_event
PCI: microchip: Add request_event_irq() callback function
PCI: microchip: Add num_events field to struct plda_pcie_rp
PCI: microchip: Rename interrupt related functions
PCI: microchip: Move PLDA functions to pcie-plda-host.c
PCI: microchip: Rename PLDA functions to be generic
PCI: microchip: Move PLDA structures to plda-pcie.h
PCI: microchip: Rename PLDA structures to be generic
PCI: microchip: Add bridge_addr field to struct mc_pcie
PCI: microchip: Move PLDA IP register macros to pcie-plda.h
PCI: microchip: Move pcie-microchip-host.c to PLDA directory
dt-bindings: PCI: Add PLDA XpressRICH PCIe host common properties
# Conflicts:
# drivers/pci/pci.h
- Enable BAR 0 only for v3.65a to avoid Completion Timeouts that
cause a 45 second boot delay on the v4.90a-based AM654x SoC (Siddharth
Vadapalli)
- Avoid a NULL pointer dereference if DT failed to provide a host bridge
memory window (Aleksandr Mishin)
* pci/controller/keystone:
PCI: keystone: Add workaround for Errata #i2037 (AM65x SR 1.0)
PCI: keystone: Fix NULL pointer dereference in case of DT error in ks_pcie_setup_rc_app_regs()
PCI: keystone: Don't enable BAR 0 for AM654x
PCI: keystone: Relocate ks_pcie_set/clear_dbi_mode()
- Return zero, not garbage, when reading PCI_INTERRUPT_PIN from a Hyper-V
device (Wei Liu)
* pci/controller/hyperv:
PCI: hv: Return zero, not garbage, when reading PCI_INTERRUPT_PIN
- Correct the dra7xx_pcie_cpu_addr_fixup() parameter name, which takes a
CPU address but called it "pci_addr" (Niklas Cassel)
* pci/controller/dra7xx:
PCI: dra7xx: Fix dra7xx_pcie_cpu_addr_fixup() parameter name
- Correct the artpec6_pcie_cpu_addr_fixup() parameter name, which takes a
CPU address but called it "pci_addr" (Niklas Cassel)
* pci/controller/artpec6:
PCI: artpec6: Fix artpec6_pcie_cpu_addr_fixup() parameter name
- Check IORESOURCE_BUS existence to avoid NULL pointer dereference
(Aleksandr Mishin)
* pci/controller/al:
PCI: al: Check IORESOURCE_BUS existence during probe
- Use msleep() in DWC core instead of usleep_range() for ~100 ms sleep
(Konrad Dybcio)
- Fix iATU slot management to avoid using the wrong slot after PERST#
assert/deassert, which could potentially cause DMA to go the wrong place
(Frank Li)
- Consolidate dw_pcie_prog_outbound_atu() arguments into a struct to ease
adding new functionality like initiating Message TLPs (Yoshihiro Shimoda)
- Add support for endpoints to initiate PCIe messages (Yoshihiro Shimoda)
- Add #defines for PCIe INTx messages (Yoshihiro Shimoda)
- Add support for endpoints to initiate PCIe PME_Turn_Off messages for
system suspend (Frank Li)
- Add dw_pcie_ep_linkdown() to reinitialize registers that are lost when
the link goes down (Manivannan Sadhasivam)
- Use dw_pcie_ep_linkdown() to reinitialize qcom non-sticky registers that
are lost when the link goes down (Manivannan Sadhasivam)
- Enforce DWC limitation that 64-bit BARs must start with the even numbered
BAR (Niklas Cassel)
* pci/controller/dwc:
PCI: dwc: ep: Enforce DWC specific 64-bit BAR limitation
PCI: layerscape-ep: Use the generic dw_pcie_ep_linkdown() API to handle Link Down event
PCI: qcom-ep: Use the generic dw_pcie_ep_linkdown() API to handle Link Down event
PCI: dwc: ep: Remove dw_pcie_ep_init_notify() wrapper
PCI: dwc: ep: Add a generic dw_pcie_ep_linkdown() API to handle Link Down event
PCI: dwc: Add generic MSG TLP support for sending PME_Turn_Off when system suspend
PCI: Add PCIE_MSG_CODE_PME_TURN_OFF message macro
PCI: Add PCIE_MSG_CODE_ASSERT_INTx message macros
PCI: dwc: Add outbound MSG TLPs support
PCI: dwc: Consolidate args of dw_pcie_prog_outbound_atu() into a structure
PCI: dwc: Fix index 0 incorrectly being interpreted as a free ATU slot
PCI: dwc: Use msleep() in dw_pcie_wait_for_link()
- Include <linux/irqchip/chained_irq.h> in dra7xx to avoid implicitly
including it elsewhere (Andy Shevchenko)
- Remove unused <linux/of_gpio.h> from aardvark and dwc drivers (dra7xx,
meson, qcom, tegra194) (Andy Shevchenko)
- Convert kirin to use scoped for_each_available_child_of_node() to ease
future error exits (Javier Carrasco)
- Convert imx6 and kirin to use the agnostic GPIO API to simplify GPIO
setup and remove usage of the deprecated of_gpio.h API (Andy Shevchenko)
* pci/controller/gpio:
PCI: kirin: Convert to use agnostic GPIO API
PCI: kirin: Convert kirin_pcie_parse_port() to scoped iterator
PCI: imx6: Convert to use agnostic GPIO API
PCI: dwc: Remove unused of_gpio.h inclusion
PCI: aardvark: Remove unused of_gpio.h inclusion
PCI: dra7xx: Add missing chained IRQ header inclusion
- Remove unused struct pci_epf_group.type_group (Christophe JAILLET)
- Use cached epc_features instead of pci_epc_get_features() to avoid having
to check for failure (potential NULL pointer dereference) (Manivannan
Sadhasivam)
- Drop pointless local msix_capable variable in pci_epf_test_alloc_space()
(Manivannan Sadhasivam)
- Rename struct pci_epc_event_ops.core_init to .epc_init, since "core" is
no longer meaningful here (Manivannan Sadhasivam)
- Rename pci_epc_bme_notify(), pci_epf_mhi_bme(), pci_epc_bme_notify() to
spell out "bus_master_enable" instead of "bme" (Manivannan Sadhasivam)
- Factor pci_epf_test_clear_bar() and pci_epf_test_free_space() out of
pci_epf_test_unbind() so they can be reused elsewhere (Manivannan
Sadhasivam)
- Move DMA initialization to the pci_epf_mhi_epc_init() callback so
endpoint drivers do this uniformly (Manivannan Sadhasivam)
- Add endpoint testing for Link Down events (Manivannan Sadhasivam)
- Add 'epc_deinit' event so endpoints that can be reset via PERST# (qcom,
tegra194) can notify EPF drivers when this happens (Manivannan
Sadhasivam)
- Make pci_epc_class constant (Greg Kroah-Hartman)
- Fix vpci_scan_bus() error checking to print error for failure (not
success) and clean up after failure (Dan Carpenter)
- Fix epf_ntb_epc_cleanup() error handling to clean up scratchpad BARs and
clean up in mirror order of allocation (Dan Carpenter)
- Add rk3588, which requires 64KB BAR alignment, to pci_endpoint_test
(Niklas Cassel)
- Use memcpy_toio()/memcpy_fromio() for endpoint BAR tests to improve
performance (Niklas Cassel)
- Set DMA mask to 48 bits always to simplify endpoint test, since there's
there's no need to check for error or to fallback to 32 bits (Frank Li)
- Suggest using programmable Vendor/Device ID (when supported) to use
pci_endpoint_test without having to add new entries (Yoshihiro Shimoda)
- Remove unused pci_endpoint_test_bar_{readl,writel}() (Jiapeng Chong)
- Remove 'linkup' and add 'add_cfs' to the endpoint function driver 'ops'
documentation to match the code (Alexander Stein)
-
* pci/endpoint:
Documentation: PCI: pci-endpoint: Fix EPF ops list
misc: pci_endpoint_test: Remove unused pci_endpoint_test_bar_{readl,writel} functions
misc: pci_endpoint_test: Document policy about adding pci_device_id
misc: pci_endpoint_test: Refactor dma_set_mask_and_coherent() logic
misc: pci_endpoint_test: Use memcpy_toio()/memcpy_fromio() for BAR tests
misc: pci_endpoint_test: Add support for Rockchip rk3588
PCI: endpoint: Fix error handling in epf_ntb_epc_cleanup()
PCI: endpoint: Clean up error handling in vpci_scan_bus()
PCI: endpoint: Make pci_epc_class struct constant
PCI: endpoint: Introduce 'epc_deinit' event and notify the EPF drivers
PCI: endpoint: pci-epf-test: Handle Link Down event
PCI: endpoint: pci-epf-{mhi/test}: Move DMA initialization to EPC init callback
PCI: endpoint: pci-epf-test: Refactor pci_epf_test_unbind() function
PCI: endpoint: Rename BME to Bus Master Enable
PCI: endpoint: Rename core_init() callback in 'struct pci_epc_event_ops' to epc_init()
PCI: endpoint: pci-epf-test: Use 'msix_capable' flag directly in pci_epf_test_alloc_space()
PCI: endpoint: pci-epf-test: Make use of cached 'epc_features' in pci_epf_test_core_init()
PCI: endpoint: Remove unused field in struct pci_epf_group
The LS7A chipset can be used as part of a PCIe Root Complex with
Loongson-3C6000 and similar CPUs. In this case, DEV_LS7A_PCIE_PORT5 has a
PCI_CLASS_BRIDGE_HOST class code, and it is a Type 0 Function whose config
space provides access to Root Complex registers.
The DEV_LS7A_PCIE_PORT5 has an MSI Capability, and its MSI Enable bit must
be set before other devices below the Root Complex can use MSI. This is
not the standard PCI behavior of MSI Enable, so the normal PCI MSI code
does not set it.
Set the DEV_LS7A_PCIE_PORT5 MSI Enable bit via a quirk so other devices
below the Root Complex can use MSI.
[kwilczynski: exit early to reduce indentation; commit log]
Link: https://lore.kernel.org/linux-pci/20240612065315.2048110-1-chenhuacai@loongson.cn
Signed-off-by: Sheng Wu <wusheng@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
The vmd driver creates a "domain" symlink in sysfs for each VMD bridge.
Previously this symlink was created after pci_bus_add_devices() added
devices below the VMD bridge and emitted udev events to announce them to
userspace.
This led to a race between userspace consumers of the udev events and the
kernel creation of the symlink. One such consumer is mdadm, which
assembles block devices into a RAID array, and for devices below a VMD
bridge, mdadm depends on the "domain" symlink.
If mdadm loses the race, it may be unable to assemble a RAID array, which
may cause a boot failure or other issues, with complaints like this:
(udev-worker)[2149]: nvme1n1: '/sbin/mdadm -I /dev/nvme1n1'(err) 'mdadm: Unable to get real path for '/sys/bus/pci/drivers/vmd/0000:c7:00.5/domain/device''
(udev-worker)[2149]: nvme1n1: '/sbin/mdadm -I /dev/nvme1n1'(err) 'mdadm: /dev/nvme1n1 is not attached to Intel(R) RAID controller.'
(udev-worker)[2149]: nvme1n1: '/sbin/mdadm -I /dev/nvme1n1'(err) 'mdadm: No OROM/EFI properties for /dev/nvme1n1'
(udev-worker)[2149]: nvme1n1: '/sbin/mdadm -I /dev/nvme1n1'(err) 'mdadm: no RAID superblock on /dev/nvme1n1.'
(udev-worker)[2149]: nvme1n1: Process '/sbin/mdadm -I /dev/nvme1n1' failed with exit code 1.
This symptom prevents the OS from booting successfully.
After a NVMe disk is probed/added by the nvme driver, udevd invokes mdadm
to detect if there is a mdraid associated with this NVMe disk, and mdadm
determines if a NVMe device is connected to a particular VMD domain by
checking the "domain" symlink. For example:
Thread A Thread B Thread mdadm
vmd_enable_domain
pci_bus_add_devices
__driver_probe_device
...
work_on_cpu
schedule_work_on
: wakeup Thread B
nvme_probe
: wakeup scan_work
to scan nvme disk
and add nvme disk
then wakeup udevd
: udevd executes
mdadm command
flush_work main
: wait for nvme_probe done ...
__driver_probe_device find_driver_devices
: probe next nvme device : 1) Detect domain symlink
... 2) Find domain symlink
... from vmd sysfs
... 3) Domain symlink not
... created yet; failed
sysfs_create_link
: create domain symlink
Create the VMD "domain" symlink before invoking pci_bus_add_devices() to
avoid this race.
Suggested-by: Adrian Huang <ahuang12@lenovo.com>
Link: https://lore.kernel.org/linux-pci/20240605124844.24293-1-sjiwei@163.com
Signed-off-by: Jiwei Sun <sunjw10@lenovo.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Smatch complains that "ret" could be uninitialized if "pcie->icc_mem" is
NULL and "pm_suspend_target_state == PM_SUSPEND_MEM".
Silence this warning by initializing ret to zero.
Fixes: 78b5f6f8855e ("PCI: qcom: Add OPP support to scale performance")
Link: https://lore.kernel.org/linux-pci/20240708180539.1447307-4-dan.carpenter@linaro.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Only call dev_pm_opp_put() if dev_pm_opp_find_freq_exact() succeeds;
otherwise it leads to an error pointer dereference.
Fixes: 78b5f6f8855e ("PCI: qcom: Add OPP support to scale performance")
Link: https://lore.kernel.org/linux-pci/20240708180539.1447307-3-dan.carpenter@linaro.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
A previous commit ("PCI: dwc: ep: Remove dw_pcie_ep_init_notify() wrapper")
removed the dw_pcie_ep_init_notify() wrapper and changed the DWC glue
drivers to instead use pci_epc_init_notify() directly.
The endpoint support for the dw-rockchip had not been merged at that point
in time, so the previous commit wrapper") did not update dw-rockchip.
Do the same change for dw-rockchip, so that the driver will not try
to use a function that has now been removed.
Link: https://lore.kernel.org/linux-pci/20240622132024.2927799-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The PCIe controller in rk3568 and rk3588 can operate in endpoint mode.
This endpoint mode support heavily leverages the existing code in
pcie-designware-ep.c.
Add support for endpoint mode to the existing pcie-dw-rockchip glue
driver.
[kwilczynski: squash with patch adding the PCI_ENDPOINT dependency]
Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-10-0a042d6b0049@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Refactor the driver to prepare for EP mode.
Add of-match data to the existing compatible, and explicitly define it as
DW_PCIE_RC_TYPE. This way, we will be able to add EP mode in a follow-up
commit in a much less intrusive way, which makes the follow-up commit much
easier to review.
No functional change intended.
Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-9-0a042d6b0049@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add a rockchip_pcie_ltssm() helper function that reads the LTSSM status.
This helper will be used in additional places in follow-up commits.
Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-8-0a042d6b0049@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Fix the indentation of rockchip_pcie_{readl,writel}_apb() parameters to
match the opening parenthesis.
Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-7-0a042d6b0049@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
PERST# is active low according to the PCIe specification.
However, the existing pcie-dw-rockchip.c driver does:
gpiod_set_value(..., 0); msleep(100); gpiod_set_value(..., 1);
when asserting + deasserting PERST#.
This is of course wrong, but because all the device trees for this
compatible string have also incorrectly marked this GPIO as ACTIVE_HIGH:
$ git grep -B 10 reset-gpios arch/arm64/boot/dts/rockchip/rk3568*
$ git grep -B 10 reset-gpios arch/arm64/boot/dts/rockchip/rk3588*
The actual toggling of PERST# is correct, and we cannot change it anyway,
since that would break device tree compatibility.
However, this driver does request the GPIO to be initialized as
GPIOD_OUT_HIGH, which does cause a silly sequence where PERST# gets
toggled back and forth for no good reason.
Fix this by requesting the GPIO to be initialized as GPIOD_OUT_LOW (which
for this driver means PERST# asserted).
This will avoid an unnecessary signal change where PERST# gets deasserted
(by devm_gpiod_get_optional()) and then gets asserted (by
rockchip_pcie_start_link()) just a few instructions later.
Before patch, debug prints on EP side, when booting RC:
[ 845.606810] pci: PERST# asserted by host!
[ 852.483985] pci: PERST# de-asserted by host!
[ 852.503041] pci: PERST# asserted by host!
[ 852.610318] pci: PERST# de-asserted by host!
After patch, debug prints on EP side, when booting RC:
[ 125.107921] pci: PERST# asserted by host!
[ 132.111429] pci: PERST# de-asserted by host!
This extra, very short, PERST# assertion + deassertion has been reported to
cause issues with certain WLAN controllers, e.g. RTL8822CE.
Fixes: 0e898eb8df ("PCI: rockchip-dwc: Add Rockchip RK356X host controller driver")
Link: https://lore.kernel.org/linux-pci/20240417164227.398901-1-cassel@kernel.org
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: stable@vger.kernel.org # v5.15+
Drivers that silently fail to probe provide a bad user experience and
make it unnecessarily hard to debug such a failure.
Fix it by using dev_err_probe() instead of a plain return.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240227141256.413055-2-ukleinek@debian.org
Signed-off-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jesper Nilsson <jesper.nilsson@axis.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Rockchip platforms use 'GPIO_ACTIVE_HIGH' flag in the devicetree definition
for ep_gpio. This means, whatever the logical value set by the driver for
the ep_gpio, physical line will output the same logic level.
For instance,
gpiod_set_value_cansleep(rockchip->ep_gpio, 0); --> Level low
gpiod_set_value_cansleep(rockchip->ep_gpio, 1); --> Level high
But while requesting the ep_gpio, GPIOD_OUT_HIGH flag is currently used.
Now, this also causes the physical line to output 'high' creating trouble
for endpoint devices during host reboot.
When host reboot happens, the ep_gpio will initially output 'low' due to
the GPIO getting reset to its POR value. Then during host controller probe,
it will output 'high' due to GPIOD_OUT_HIGH flag. Then during
rockchip_pcie_host_init_port(), it will first output 'low' and then 'high'
indicating the completion of controller initialization.
On the endpoint side, each output 'low' of ep_gpio is accounted for PERST#
assert and 'high' for PERST# deassert. With the above mentioned flow during
host reboot, endpoint will witness below state changes for PERST#:
(1) PERST# assert - GPIO POR state
(2) PERST# deassert - GPIOD_OUT_HIGH while requesting GPIO
(3) PERST# assert - rockchip_pcie_host_init_port()
(4) PERST# deassert - rockchip_pcie_host_init_port()
Now the time interval between (2) and (3) is very short as both happen
during the driver probe(), and this results in a race in the endpoint.
Because, before completing the PERST# deassertion in (2), endpoint got
another PERST# assert in (3).
A proper way to fix this issue is to change the GPIOD_OUT_HIGH flag in (2)
to GPIOD_OUT_LOW. Because the usual convention is to request the GPIO with
a state corresponding to its 'initial/default' value and let the driver
change the state of the GPIO when required.
As per that, the ep_gpio should be requested with GPIOD_OUT_LOW as it
corresponds to the POR value of '0' (PERST# assert in the endpoint). Then
the driver can change the state of the ep_gpio later in
rockchip_pcie_host_init_port() as per the initialization sequence.
This fixes the firmware crash issue in Qcom based modems connected to
Rockpro64 based board.
Fixes: e77f847df5 ("PCI: rockchip: Add Rockchip PCIe controller support")
Closes: https://lore.kernel.org/mhi/20240402045647.GG2933@thinkpad/
Link: https://lore.kernel.org/linux-pci/20240416-pci-rockchip-perst-fix-v1-1-4800b1d4d954@linaro.org
Reported-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Cc: stable@vger.kernel.org # v4.9
PCIe r6.0, sec 6.6.1, states that the host should wait for at least 100
msec from the end of a conventional reset (PERST# is de-asserted) before
sending a configuration request to ensure that the device is able to
respond with a "Request Retry Status" completion.
Add the PCIE_T_RRS_READY_MS macro to define this wait time and modify
rockchip_pcie_host_init_port() to add this 100ms sleep after deasserting
PERST# using the ep_gpio GPIO.
Link: https://lore.kernel.org/linux-pci/20240413004120.1099089-3-dlemoal@kernel.org
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
PCIe CEM r5.1, sec 2.9.2, mandates that the PERST# signal must remain
asserted for at least 100 usec (Tperst-clk) after the PCIe reference clock
becomes stable (if a reference clock is supplied), and for at least 100
msec after the power is stable (Tpvperl, defined by the macro
PCIE_T_PVPERL_MS).
Modify rockchip_pcie_host_init_port() to satisfy these constraints by
adding a sleep period before deasserting PERST# using the ep_gpio GPIO.
Since Tperst-clk is the shorter wait time, add an msleep() call for the
longer PCIE_T_PVPERL_MS milliseconds to handle both timing requirements.
Link: https://lore.kernel.org/linux-pci/20240413004120.1099089-2-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
From the DWC EP databook 5.96a, section "3.5.7.1.4 General Rules for BAR
Setup (Fixed Mask or Programmable Mask Schemes Only)":
"Any pair (for example BARs 0 and 1) can be configured as one 64-bit BAR,
two 32-bit BARs, or one 32-bit BAR."
"BAR pairs cannot overlap to form a 64-bit BAR. For example, you cannot
combine BARs 1 and 2 to form a 64-bit BAR."
While this limitation does exist in some other PCI endpoint controllers,
e.g. cdns_pcie_ep_set_bar(), the limitation does not appear to be defined
in the PCIe specification itself, thus add an explicit check for this in
dw_pcie_ep_set_bar() (rather than pci_epc_set_bar()).
Link: https://lore.kernel.org/linux-pci/20240528134839.8817-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Now that dw_pcie_ep_linkdown() is available, use it. This also handles the
reinitialization of DWC non-sticky registers in addition to sending the
notification to EPF drivers.
Closes: https://lore.kernel.org/linux-pci/20240528195539.GA458945@bhelgaas
Link: https://lore.kernel.org/linux-pci/20240606-pci-deinit-v1-5-4395534520dc@linaro.org
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Now that the generic dw_pcie_ep_linkdown() API is available, use it. This
also handles the reinitialization of DWC non-sticky registers in addition
to sending the notification to EPF drivers.
Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-9-22832d0d456f@linaro.org
Tested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Currently dw_pcie_ep_init_notify() wrapper just calls pci_epc_init_notify()
directly, so this wrapper provides no benefit to the glue drivers.
Remove it and call pci_epc_init_notify() directly from glue drivers.
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Link: https://lore.kernel.org/linux-pci/20240606-pci-deinit-v1-1-4395534520dc@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Per PCIe r6.0, sec 5.2, a Link Down event can happen under any of the
following circumstances:
1. Fundamental/Hot reset
2. Link disable transmission by upstream component
3. Moving from L2/L3 to L0
In those cases, Link Down causes some non-sticky DWC registers to lose the
state (like REBAR, etc.), so drivers need to reinitialize them to function
properly once the link comes back again.
This is not a problem for drivers supporting PERST# IRQ, since they can
reinitialize the registers in the PERST# IRQ callback. But for the drivers
not supporting PERST#, there is no way they can reinitialize the registers
other than relying on Link Down IRQ received when the link goes down. So
add a DWC generic API dw_pcie_ep_linkdown() that reinitializes the
non-sticky registers and also notifies the EPF drivers about link going
down.
This API can also be used by the drivers supporting PERST# to handle the
scenario (2) mentioned above.
NOTE: For the sake of code organization, move the dw_pcie_ep_linkup()
definition just above dw_pcie_ep_linkdown().
Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-8-22832d0d456f@linaro.org
Tested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: update spec citation]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Instead of relying on the vendor specific implementations to send the
PME_Turn_Off message, introduce a generic way of sending the message using
the MSG TLP.
This is achieved by reserving a region for MSG TLP of size
'pci->region_align', at the end of the first IORESOURCE_MEM window of the
host bridge. And then sending the PME_Turn_Off message during system
suspend with the help of iATU.
The reason for reserving the MSG TLP region at the end of the
IORESOURCE_MEM is to avoid generating holes in between, because when the
region is allocated using allocate_resource(), memory will be allocated
from the start of the window. Later, if memory gets allocated for an
endpoint of size bigger than 'region_align', there will be a hole between
MSG TLP region and endpoint memory.
This generic implementation is optional for the glue drivers and can be
overridden by a custom 'pme_turn_off' callback.
Link: https://lore.kernel.org/linux-pci/20240418-pme_msg-v8-5-a54265c39742@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add "code" and "routing" into struct dw_pcie_ob_atu_cfg for triggering
INTx IRQs by iATU in the PCIe endpoint mode in near the future.
PCIE_ATU_INHIBIT_PAYLOAD is set to issue TLP type of Msg instead of
MsgD. This implementation supports the data-less messages only for now.
Link: https://lore.kernel.org/linux-pci/20240418-pme_msg-v8-3-a54265c39742@nxp.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
This is a preparation before adding the Msg-type outbound iATU
mapping. The respective update will require two more arguments added
to __dw_pcie_prog_outbound_atu(). That will make the already
complicated function prototype even more hard to comprehend accepting
_eight_ arguments.
To prevent that and keep the code more-or-less readable, move all the
outbound iATU-related arguments to a new config structure: struct
dw_pcie_ob_atu_cfg, and pass a pointer to dw_pcie_prog_outbound_atu(). The
structure should be locally defined and populated with the outbound iATU
settings implied by the caller context.
As a result of this change there is no longer need in having the two
distinctive methods for the Host and Endpoint outbound iATU setups since
the code can directly call the dw_pcie_prog_outbound_atu() method with the
config structure populated, so drop dw_pcie_prog_ep_outbound_atu().
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240418-pme_msg-v8-2-a54265c39742@nxp.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
When PERST# assert and deassert happens on the PERST# supported platforms,
both iATU0 and iATU6 will map inbound window to BAR0. DMA will access the
area that was previously allocated (iATU0) for BAR0, instead of the new
area (iATU6) for BAR0.
Right now, this isn't an issue because both iATU0 and iATU6 should
translate inbound accesses to BAR0 to the same allocated memory area.
However, having two separate inbound mappings for the same BAR is a
disaster waiting to happen.
The mappings between PCI BAR and iATU inbound window are maintained in the
dw_pcie_ep::bar_to_atu[] array. While allocating a new inbound iATU map for
a BAR, dw_pcie_ep_inbound_atu() API checks for the availability of the
existing mapping in the array and if it is not found (i.e., value in the
array indexed by the BAR is found to be 0), it allocates a new map value
using find_first_zero_bit().
The issue is the existing logic failed to consider the fact that the map
value '0' is a valid value for BAR0, so find_first_zero_bit() will return
'0' as the map value for BAR0 (note that it returns the first zero bit
position).
Due to this, when PERST# assert + deassert happens on the PERST# supported
platforms, the inbound window allocation restarts from BAR0 and the
existing logic to find the BAR mapping will return '6' for BAR0 instead of
'0' due to the fact that it considers '0' as an invalid map value.
Fix this issue by always incrementing the map value before assigning to
bar_to_atu[] array and then decrementing it while fetching. This will make
sure that the map value '0' always represents the invalid mapping."
Fixes: 4284c88fff ("PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address")
Closes: https://lore.kernel.org/linux-pci/ZXsRp+Lzg3x%2Fnhk3@x1-carbon/
Link: https://lore.kernel.org/linux-pci/20240412160841.925927-1-Frank.Li@nxp.com
Reported-by: Niklas Cassel <Niklas.Cassel@wdc.com>
Tested-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
According to [1], msleep should be used for large sleeps, such as the
100-ish ms one in this function. Comply with the guide and use it.
[1] https://docs.kernel.org/timers/timers-howto.html
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240215-topic-pci_sleep-v2-1-79334884546b@linaro.org
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The of_gpio.h legacy API is going to be removed. In preparation for that,
convert the driver to the agnostic API.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240506142142.4042810-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Convert loops in kirin_pcie_parse_port() to use the _scoped() version of
for_each_available_child_of_node() so the refcounts of children are
implicitly decremented when the loop is exited.
No functional change intended here, but it will make future error exits
from these loops easier.
Link: https://lore.kernel.org/linux-pci/20240609-pcie-kirin-memleak-v1-1-62b45b879576@gmail.com
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: move to GPIO series to avoid bisection hole, commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
QCOM Resource Power Manager-hardened (RPMh) is a hardware block which
maintains hardware state of a regulator by performing max aggregation of
the requests made by all of the clients.
PCIe controller can operate on different RPMh performance state of power
domain based on the speed of the link. And this performance state varies
from target to target, like some controllers support GEN3 in NOM (Nominal)
voltage corner, while some other supports GEN3 in low SVS (static voltage
scaling).
The SoC can be more power efficient if we scale the performance state
based on the aggregate PCIe link bandwidth.
Add Operating Performance Points (OPP) support to vote for RPMh state based
on the aggregate link bandwidth.
OPP can handle ICC bw voting also, so move ICC bw voting through OPP
framework if OPP entries are present.
As we are moving ICC voting as part of OPP, don't initialize ICC if OPP
is supported.
Before PCIe link is initialized vote for highest OPP in the OPP table,
so that we are voting for maximum voltage corner for the link to come up
in maximum supported speed.
Link: https://lore.kernel.org/linux-pci/20240619-opp_support-v15-4-aa769a2173a3@quicinc.com
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: wrap comments to fit in 80 columns]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To access the host controller registers of the host controller and the
endpoint BAR/config space, the CPU-PCIe ICC (interconnect) path should
be voted otherwise it may lead to NoC (Network on chip) timeout.
We are surviving because of other driver voting for this path.
As there is less access on this path compared to PCIe to mem path
add minimum vote i.e 1KBps bandwidth always which is sufficient enough
to keep the path active and is recommended by HW team.
During S2RAM (Suspend-to-RAM), the DBI access can happen very late (while
disabling the boot CPU). So do not disable the CPU-PCIe interconnect path
during S2RAM as that may lead to NoC error.
Link: https://lore.kernel.org/linux-pci/20240619-opp_support-v15-1-aa769a2173a3@quicinc.com
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
All EP specific resources are enabled during PERST# deassert. As a counter
operation, all resources should be disabled during PERST# assert. There is
no point in skipping that if the link was not enabled.
This will also result in enablement of the resources twice if PERST# got
deasserted again. So remove the check from qcom_pcie_perst_assert() and
disable all the resources unconditionally.
Fixes: f55fee56a6 ("PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver")
Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-1-22832d0d456f@linaro.org
Tested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Due to some hardware changes, SA8775P has set the NO_SNOOP attribute
in its TLP for all the PCIe controllers. NO_SNOOP attribute when set,
the requester is indicating that no cache coherency issues exist for
the addressed memory on the host i.e., memory is not cached. But in
reality, requester cannot assume this unless there is a complete
control/visibility over the addressed memory on the host.
And worst case, if the memory is cached on the host, it may lead to
memory corruption issues. It should be noted that the caching of memory
on the host is not solely dependent on the NO_SNOOP attribute in TLP.
So to avoid the corruption, this patch overrides the NO_SNOOP attribute
by setting the PCIE_PARF_NO_SNOOP_OVERIDE register. This patch is not
needed for other upstream supported platforms since they do not set
NO_SNOOP attribute by default.
Link: https://lore.kernel.org/linux-pci/1710166298-27144-3-git-send-email-quic_msarkar@quicinc.com
Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Due to some hardware changes, SA8775P has set the NO_SNOOP attribute
in its TLP for all the PCIe controllers. NO_SNOOP attribute when set,
the requester is indicating that no cache coherency issue exist for
the addressed memory on the endpoint i.e., memory is not cached. But
in reality, requester cannot assume this unless there is a complete
control/visibility over the addressed memory on the endpoint.
And worst case, if the memory is cached on the endpoint, it may lead to
memory corruption issues. It should be noted that the caching of memory
on the endpoint is not solely dependent on the NO_SNOOP attribute in TLP.
So to avoid the corruption, this patch overrides the NO_SNOOP attribute
by setting the PCIE_PARF_NO_SNOOP_OVERIDE register. This patch is not
needed for other upstream supported platforms since they do not set
NO_SNOOP attribute by default.
8775 has IP version 1.34.0 so introduce a new cfg(cfg_1_34_0) for this
platform. Assign override_no_snoop flag into struct qcom_pcie_cfg and
set it true in cfg_1_34_0 and enable cache snooping if this particular
flag is true.
Link: https://lore.kernel.org/linux-pci/1710166298-27144-2-git-send-email-quic_msarkar@quicinc.com
Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: wrap comments to fit in 80 columns]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
As like the 'epc_init' event, that is used to signal the EPF drivers about
the EPC initialization, let's introduce 'epc_deinit' event that is used to
signal EPC deinitialization.
The EPC deinitialization applies only when any sort of fundamental reset
is supported by the endpoint controller as per the PCIe spec.
Reference: PCIe r6.0, sec 4.2.5.9.1 and 6.6.1.
Currently, some EPC drivers like pcie-qcom-ep and pcie-tegra194 support
PERST# as the fundamental reset. So the 'deinit' event will be notified to
the EPF drivers when PERST# assert happens in the above mentioned EPC
drivers.
The EPF drivers, on receiving the event through the epc_deinit() callback
should reset the EPF state machine and also cleanup any configuration that
got affected by the fundamental reset like BAR, DMA etc...
This change also warrants skipping the cleanups in unbind() if already done
in epc_deinit().
Link: https://lore.kernel.org/r/20240606-pci-deinit-v1-2-4395534520dc@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
The intent of the code snippet is to always return 0 for both
PCI_INTERRUPT_LINE and PCI_INTERRUPT_PIN.
The check misses PCI_INTERRUPT_PIN. This patch fixes that.
This is discovered by this call in VFIO:
pci_read_config_byte(vdev->pdev, PCI_INTERRUPT_PIN, &pin);
The old code does not set *val to 0 because it misses the check for
PCI_INTERRUPT_PIN. Garbage is returned in that case.
Fixes: 4daace0d8c ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
Link: https://lore.kernel.org/linux-pci/20240701202606.129606-1-wei.liu@kernel.org
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Cc: stable@kernel.org
Add support for r8a779g0 (R-Car V4H).
This driver previously supported r8a779f0 (R-Car S4-8). PCIe features
of both r8a779f0 and r8a779g0 are almost all the same. For example:
- PCI Express Base Specification Revision 4.0
- Root complex mode and endpoint mode are supported
However, r8a779g0 requires specific firmware to be provided, to
initialize the PHY. Otherwise, the PCIe controller will not work.
[kwilczynski: drop the proprietary firmware conversion comment]
Link: https://lore.kernel.org/linux-pci/20240611125057.1232873-5-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Sequence for controlling the LTSSM state machine is going to change
for SoCs like r8a779f0. Move the LTSSM code to a new callback
ltssm_control() and populate it for each SoCs.
This also warrants the addition of new compatibles for r8a779g0 and
r8a779h0. But since they are already part of the DT binding, it won't
make any difference.
Link: https://lore.kernel.org/linux-pci/20240611125057.1232873-4-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
In order to support future SoCs such as r8a779g0 (R-Car V4H) and
r8a779h0 (R-Car V4M) that require different initialization settings,
introduce SoC specific driver data with the initial member being the
device mode.
No functional change.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240611125057.1232873-3-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
R-Car Gen4 PCIe controller needs to use the Synopsys-specific PCIe
configuration registers. So, add the macros.
Link: https://lore.kernel.org/linux-pci/20240611125057.1232873-2-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Errata #i2037 in AM65x/DRA80xM Processors Silicon Revision 1.0
(SPRZ452D_July 2018_Revised December 2019 [1]) mentions when an
inbound PCIe TLP spans more than two internal AXI 128-byte bursts,
the bus may corrupt the packet payload and the corrupt data may
cause associated applications or the processor to hang.
The workaround for Errata #i2037 is to limit the maximum read
request size and maximum payload size to 128 bytes. Add workaround
for Errata #i2037 here.
The errata and workaround is applicable only to AM65x SR 1.0 and
later versions of the silicon will have this fixed.
[1] -> https://www.ti.com/lit/er/sprz452i/sprz452i.pdf
Link: https://lore.kernel.org/linux-pci/16e1fcae-1ea7-46be-b157-096e05661b15@siemens.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Achal Verma <a-verma1@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
The struct mobiveil_rp_ops is not modified in this driver.
Thus, make this struct constant, which also moves data to a read-only
section decreasing object size and also improving overall security.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
4446 336 32 4814 12ce drivers/pci/controller/mobiveil/pcie-layerscape-gen4.o
After:
=====
text data bss dec hex filename
4454 328 32 4814 12ce drivers/pci/controller/mobiveil/pcie-layerscape-gen4.o
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/189fd881cc8fd80220e74e91820e12cf3a5be114.1719260294.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
'tegra_pcie_soc' has been unused since 56e15a238d ("PCI: tegra: Add
Tegra194 PCIe support"). Remove it.
Link: https://lore.kernel.org/r/20240527160118.37069-1-linux@treblig.org
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Use preserve_config in place of checking for PCI_PROBE_ONLY flag to enable
support for "linux,pci-probe-only" on a per host bridge basis.
This also obviates the use of adding PCI_REASSIGN_ALL_BUS flag if
!PCI_PROBE_ONLY, as pci_assign_unassigned_root_bus_resources() takes care
of reassigning the resources that are not already claimed.
Link: https://lore.kernel.org/r/20240508174138.3630283-5-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tegra194 and Tegra234 PCIe EP controllers have 64K alignment restriction
for the inbound ATU. Set the endpoint inbound ATU alignment to 64kB in the
Tegra194 PCIe driver.
Fixes: c57247f940 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Suggested-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Link: https://lore.kernel.org/linux-pci/20240508092207.337063-1-jonathanh@nvidia.com
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Avoid large backtrace, it is sufficient to warn the user that there has
been a link problem. Either the link has failed and the system is in need
of maintenance, or the link continues to work and user has been informed.
The message from the warning can be looked up in the sources.
This makes an actual link issue less verbose.
First of all, this controller has a limitation in that the controller
driver has to assist the hardware with transition to L1 link state by
writing L1IATN to PMCTRL register, the L1 and L0 link state switching
is not fully automatic on this controller.
In case of an ASMedia ASM1062 PCIe SATA controller which does not support
ASPM, on entry to suspend or during platform pm_test, the SATA controller
enters D3hot state and the link enters L1 state. If the SATA controller
wakes up before rcar_pcie_wakeup() was called and returns to D0, the link
returns to L0 before the controller driver even started its transition to
L1 link state. At this point, the SATA controller did send an PM_ENTER_L1
DLLP to the PCIe controller and the PCIe controller received it, and the
PCIe controller did set PMSR PMEL1RX bit.
Once rcar_pcie_wakeup() is called, if the link is already back in L0 state
and PMEL1RX bit is set, the controller driver has no way to determine if
it should perform the link transition to L1 state, or treat the link as if
it is in L0 state. Currently the driver attempts to perform the transition
to L1 link state unconditionally, which in this specific case fails with a
PMSR L1FAEG poll timeout, however the link still works as it is already
back in L0 state.
Reduce this warning verbosity. In case the link is really broken, the
rcar_pcie_config_access() would fail, otherwise it will succeed and any
system with this controller and ASM1062 can suspend without generating
a backtrace.
Fixes: 84b5761462 ("PCI: rcar: Finish transition to L1 state in rcar_pcie_config_access()")
Link: https://lore.kernel.org/linux-pci/20240511235513.77301-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
plda_pcie_setup_iomems() needs the bridge->windows list from struct
pci_host_bridge and is currently used only by pcie-microchip-host.c. This
driver uses pci_host_common_probe(), which sets a pci_host_bridge as the
drvdata, so plda_pcie_setup_iomems() used platform_get_drvdata() to find
the pci_host_bridge.
But we also want to use plda_pcie_setup_iomems() in the new pcie-starfive.c
driver, which does not use pci_host_common_probe() and will have struct
starfive_jh7110_pcie as its drvdata, so pass the pci_host_bridge directly
to plda_pcie_setup_iomems() so it doesn't need platform_get_drvdata() to
find it.
Link: https://lore.kernel.org/linux-pci/20240328091835.14797-9-minda.chen@starfivetech.com
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log, reorder to where this is needed]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Add PLDA host plda_pcie_host_init()/plda_pcie_host_deinit() and map bus
function so vendors can use it to init PLDA PCIe host core.
Link: https://lore.kernel.org/linux-pci/20240328091835.14797-19-minda.chen@starfivetech.com
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
PLDA DMA interrupts are not all implemented, and the non-implemented
interrupts should be masked. Add a bitmap field to mask the non-implemented
interrupts.
Link: https://lore.kernel.org/linux-pci/20240328091835.14797-18-minda.chen@starfivetech.com
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
As PLDA DT binding doc (Documentation/devicetree/bindings/pci/
plda,xpressrich3-axi-common.yaml) showed, PLDA PCIe contains an interrupt
controller.
PolarFire implements its own PCIe interrupts, additional to the regular
PCIe interrupts, due to lack of an MSI controller, so the interrupt to
event number mapping is different to the PLDA regular interrupts,
necessitating a custom get_events() implementation.
Microchip PolarFire PCIe additional interrupts (defined in
drivers/pci/controller/plda/pcie-microchip-host.c):
EVENT_PCIE_L2_EXIT
EVENT_PCIE_HOTRST_EXIT
EVENT_PCIE_DLUP_EXIT
EVENT_SEC_TX_RAM_SEC_ERR
EVENT_SEC_RX_RAM_SEC_ERR
...
plda_get_events() adds interrupt register to PLDA event num mapping codes.
All the PLDA interrupts can be seen in new added graph.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240328091835.14797-15-minda.chen@starfivetech.com
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
The INTx and MSI interrupt event num is different across platforms, so
add two event num fields in struct plda_event.
Link: https://lore.kernel.org/linux-pci/20240328091835.14797-14-minda.chen@starfivetech.com
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
As the PLDA DT binding doc (Documentation/devicetree/bindings/pci/
plda,xpressrich3-axi-common.yaml) shows, the PLDA IP contains an interrupt
controller. Microchip PolarFire add some interrupts based on PLDA interrupt
controller.
The Microchip PolarFire PCIe additional interrupts (defined in
drivers/pci/controller/plda/pcie-microchip-host.c):
EVENT_PCIE_L2_EXIT
EVENT_PCIE_HOTRST_EXIT
EVENT_PCIE_DLUP_EXIT
EVENT_SEC_TX_RAM_SEC_ERR
EVENT_SEC_RX_RAM_SEC_ERR
...
Both event_cause[] and mc_event_handler() contain additional interrupt
symbol names; these can not be re-used. Add a new plda_event_handler()
function, which implements PLDA interrupt defalt handler, and add a
request_event_irq() callback function for Microchip PolarFire additional
interrupts.
[kwilczynski, bhelgaas: commit log]
Link: https://lore.kernel.org/linux-pci/20240328091835.14797-13-minda.chen@starfivetech.com
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
The number of events is different across platforms. In order to share
interrupt processing code, add a variable that defines the number of
events so that it can be set per-platform instead of hardcoding it.
Link: https://lore.kernel.org/linux-pci/20240328091835.14797-12-minda.chen@starfivetech.com
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Rename mc_* to plda_* for IRQ functions and related IRQ domain ops data
instances.
MSI, INTx interrupt code and IRQ init code can all be re-used.
Link: https://lore.kernel.org/linux-pci/20240328091835.14797-11-minda.chen@starfivetech.com
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Move plda_pcie_setup_window() and plda_pcie_setup_iomems() to
pcie-plda-host.c so they can be shared by all PLDA-based drivers.
Link: https://lore.kernel.org/linux-pci/20240328091835.14797-10-minda.chen@starfivetech.com
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Rename mc_pcie_setup_window() to plda_pcie_setup_window() and
mc_pcie_setup_windows() to plda_pcie_setup_iomems() so they can be shared
by all PLDA-based drivers.
Link: https://lore.kernel.org/linux-pci/20240328091835.14797-8-minda.chen@starfivetech.com
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Move the PLDA generic data structures to a header file so they can be
re-used by all PLDA-based drivers.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240328091835.14797-7-minda.chen@starfivetech.com
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Rename struct mc_msi to plda_msi and move most of struct mc_pcie to a new
struct plda_pcie_rp so they can be shared by all PLDA-based drivers.
The axi_base_addr field remains in struct mc_pcie since it's
Microchip-specific data.
The event interrupt code is still using struct mc_pcie because the event
interrupt code can not be re-used.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240328091835.14797-6-minda.chen@starfivetech.com
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Bridge address base is common PLDA field, add this to struct mc_pcie first.
INTx and MSI interrupt code will be changed to common code, so get the
bridge base address from port->bridge_addr instead of axi_base_addr.
The axi_base_addr is Microchip-specific data.
Link: https://lore.kernel.org/linux-pci/20240328091835.14797-5-minda.chen@starfivetech.com
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
If IORESOURCE_MEM is not provided in Device Tree due to
any error, resource_list_first_type() will return NULL and
pci_parse_request_of_pci_ranges() will just emit a warning.
This will cause a NULL pointer dereference. Fix this bug by adding NULL
return check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 0f71c60ffd ("PCI: dwc: Remove storing of PCI resources")
Link: https://lore.kernel.org/linux-pci/20240505061517.11527-1-amishin@t-argos.ru
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
After 6ab15b5e70 ("PCI: dwc: keystone: Convert .scan_bus() callback to
use add_bus"), ks_pcie_v3_65_add_bus() enabled BAR 0 for both v3.65a and
v4.90a devices. On the AM654x SoC, which uses v4.90a, enabling BAR 0
causes Completion Timeouts when setting up MSI-X. These timeouts delay
boot of the AM654x by about 45 seconds.
Move the BAR 0 initialization to ks_pcie_msi_host_init(), which is only
used for v3.65a devices, and remove ks_pcie_v3_65_add_bus().
[bhelgaas: commit log]
Fixes: 6ab15b5e70 ("PCI: dwc: keystone: Convert .scan_bus() callback to use add_bus")
Link: https://lore.kernel.org/linux-pci/20240328085041.2916899-3-s-vadapalli@ti.com
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Suggested-by: Niklas Cassel <cassel@kernel.org>
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Relocate ks_pcie_set_dbi_mode() and ks_pcie_clear_dbi_mode() to avoid
forward declaration in a subsequent patch. No functional change intended.
Link: https://lore.kernel.org/linux-pci/20240328085041.2916899-2-s-vadapalli@ti.com
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The of_gpio.h legacy API is going to be removed. In preparation for that,
convert the driver to the agnostic API.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240506142142.4042810-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The of_gpio.h API is deprecated and subject to removal. The driver doesn't
use it, so simply remove the unused header.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240506142142.4042810-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The of_gpio.h API is deprecated and subject to removal. The driver doesn't
use it, so simply remove the unused header.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240506142142.4042810-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
There is no need to hardcode the clock info in the driver as driver can
rely on the devicetree to supply the clocks required for the functioning
of the peripheral.
Thus, remove the static clock info and obtain the platform supplied
clocks. All the clocks supplied are obtained and enabled using the
devm_clk_bulk_get_all_enable() API.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240220084046.23786-3-shradha.t@samsung.com
Signed-off-by: Shradha Todi <shradha.t@samsung.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The function pointer declaration for the cpu_addr_fixup() callback uses
"cpu_addr" as parameter name.
Likewise, the argument that is supplied to the function pointer when the
function is actually called is "cpu_addr".
Rename the dra7xx_pcie_cpu_addr_fixup() function parameter name to match
reality.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240430071054.248008-3-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The function pointer declaration for the cpu_addr_fixup() callback uses
"cpu_addr" as parameter name.
Likewise, the argument that is supplied to the function pointer when the
function is actually called is "cpu_addr".
Rename the artpec6_pcie_cpu_addr_fixup() parameter name to match
reality.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240430071054.248008-4-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
If IORESOURCE_BUS is not provided in Device Tree it will be fabricated in
of_pci_parse_bus_range(), so NULL pointer dereference should not happen
here.
But that's hard to verify, so check for NULL anyway.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Link: https://lore.kernel.org/linux-pci/20240503125705.46055-1-amishin@t-argos.ru
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
BME which stands for 'Bus Master Enable' is not defined in the PCIe base
spec even though it is commonly referred in many places (vendor docs). To
align with the spec, rename it to its expansion 'Bus Master Enable'.
Suggested-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-3-22832d0d456f@linaro.org
Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-4-22832d0d456f@linaro.org
Tested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: squash removal of irrelevant 'Link is enabled']
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
SA8775P SoC supports the new Hyper DMA (HDMA) DMA Engine inside the DWC IP,
so add support for it by passing the mapping format and the number of
read/write channels count.
The PCIe EP controller used on this SoC is of version 1.34.0, so a separate
config struct is introduced for the sake of enabling HDMA conditionally.
It should be noted that for the eDMA support (predecessor of HDMA), there
are no mapping format and channels count specified. That is because eDMA
supports auto detection of both parameters, whereas HDMA doesn't.
[mani: reworded commit message, added kdoc, and minor cleanups]
Link: https://lore.kernel.org/linux-pci/20240318-dw-hdma-v5-4-f04c5cdde760@linaro.org
Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <frank.li@nxp.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Instead of maintaining a separate capability for glue drivers that cannot
support auto detection of the eDMA mapping format, pass the mapping format
directly from them.
This will simplify the code and also allow adding HDMA support that also
doesn't support auto detection of mapping format.
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/linux-pci/20240318-dw-hdma-v5-3-f04c5cdde760@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
In the case of Hyper DMA (HDMA) present in DWC controllers, there is no way
the drivers can auto detect the number of read/write channels as like its
predecessor embedded DMA (eDMA). So the glue drivers making use of HDMA
have to pass the channels count during probe.
To accommodate that, skip the existing auto detection of channels count
procedure for HDMA based platforms. If the channels count passed by the
glue drivers were wrong in any form, then the existing sanity check will
catch it.
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/linux-pci/20240318-dw-hdma-v5-2-f04c5cdde760@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <frank.li@nxp.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
In order to add support for Hyper DMA (HDMA), refactor the existing
dw_pcie_edma_find_chip() API by moving the common code to separate
functions.
No functional change.
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/linux-pci/20240318-dw-hdma-v5-1-f04c5cdde760@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <frank.li@nxp.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Add support for SA8775P SoC to the Qualcomm PCIe Endpoint Controller
driver. Adding new compatible string as it has different set of clocks
compared to other SoCs.
Link: https://lore.kernel.org/linux-pci/1714492540-15419-3-git-send-email-quic_msarkar@quicinc.com
Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
There is no need for the device drivers to validate the clocks defined in
Devicetree. The validation should be performed by the DT schema and the
drivers should just get all the clocks from DT. Right now the driver
hardcodes the clock info and validates them against DT which is redundant.
So use devm_clk_bulk_get_all() that just gets all the clocks defined in DT
and get rid of all static clocks info from the driver. This simplifies the
driver.
Link: https://lore.kernel.org/linux-pci/20240417-pci-qcom-clk-bulk-v1-1-52ca19b3d6b2@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
- Return success from endpoint probe before incorrectly dropping the
reference to the BPMP (Vidya Sagar)
* pci/controller/tegra194:
PCI: tegra194: Fix probe path for Endpoint mode
- Configure endpoint BAR to be 64-bit if the PCI_BASE_ADDRESS_MEM_TYPE_64
flag is set instead of depending on the new BAR value itself (Niklas
Cassel)
- Set Subsystem Vendor ID correctly (Rick Wertenbroek)
* pci/controller/rockchip:
PCI: rockchip-ep: Remove wrong mask on subsys_vendor_id
PCI: rockchip-ep: Set a 64-bit BAR if requested
- Move DBI accesses from dw_pcie_ep_init() to dw_pcie_ep_init_complete() so
drivers for endpoints that require Refclk for DBI access, e.g., qcom and
tegra194, can control when this happens (Manivannan Sadhasivam)
- Add endpoint API kernel-doc (Manivannan Sadhasivam)
- Remove .deinit() callback and instead call rcar_gen4_pcie_ep_deinit()
explicitly from rcar-gen4, which was the only user (Manivannan
Sadhasivam)
- Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to correspond with
dw_pcie_ep_init() (Manivannan Sadhasivam)
- Add dw_pcie_ep_cleanup() for drivers that need to clean up eDMA resources
when PERST# is asserted, e.g., qcom, tegra194 (Manivannan Sadhasivam)
- Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
better reflect the functionality (Manivannan Sadhasivam)
- Call dw_pcie_ep_init_registers() directly from drivers instead of from
dw_pcie_ep_init() so drivers, e.g., qcom and tegra194, can do it when
Refclk is available (Manivannan Sadhasivam)
- Remove the "core_init_notifier" flag, which previously identified drivers
that required Refclk before DBI access, because it's now unnecessary
(Manivannan Sadhasivam)
* pci/controller/dwc:
PCI: endpoint: Remove "core_init_notifier" flag
PCI: dwc: ep: Call dw_pcie_ep_init_registers() API directly from all glue drivers
PCI: dwc: ep: Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers()
PCI: dwc: ep: Introduce dw_pcie_ep_cleanup() API for drivers supporting PERST#
PCI: dwc: ep: Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit()
PCI: dwc: ep: Remove deinit() callback from struct dw_pcie_ep_ops
PCI: dwc: ep: Add Kernel-doc comments for APIs
PCI: dwc: ep: Fix DBI access failure for drivers requiring refclk from host
Remove wrong mask on subsys_vendor_id. Both the Vendor ID and Subsystem
Vendor ID are u16 variables and are written to a u32 register of the
controller. The Subsystem Vendor ID was always 0 because the u16 value
was masked incorrectly with GENMASK(31,16) resulting in all lower 16
bits being set to 0 prior to the shift.
Remove both masks as they are unnecessary and set the register correctly
i.e., the lower 16-bits are the Vendor ID and the upper 16-bits are the
Subsystem Vendor ID.
This is documented in the RK3399 TRM section 17.6.7.1.17
[kwilczynski: removed unnecesary newline]
Fixes: cf590b0783 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Link: https://lore.kernel.org/linux-pci/20240403144508.489835-1-rick.wertenbroek@gmail.com
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
The following warning appears when driver is compiled with W=1.
CC drivers/pci/controller/pcie-mt7621.o
drivers/pci/controller/pcie-mt7621.c: In function ‘mt7621_pcie_probe’:
drivers/pci/controller/pcie-mt7621.c:228:49: error: ‘snprintf’ output may
be truncated before the last format character [-Werror=format-truncation=]
228 | snprintf(name, sizeof(name), "pcie-phy%d", slot);
| ^
drivers/pci/controller/pcie-mt7621.c:228:9: note: ‘snprintf’ output between
10 and 11 bytes into a destination of size 10
228 | snprintf(name, sizeof(name), "pcie-phy%d", slot);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Clean this up increasing destination buffer one byte.
[kwilczynski: commit log]
Closes: https://lore.kernel.org/linux-pci/20240110212302.GA2123146@bhelgaas/T/#t
Link: https://lore.kernel.org/linux-pci/20240111082704.2259450-1-sergio.paracuellos@gmail.com
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Tegra194 PCIe probe path is taking failure path in success case for
Endpoint mode. Return success from the switch case instead of going
into the failure path.
Fixes: c57247f940 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Link: https://lore.kernel.org/linux-pci/20240408093053.3948634-1-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
"core_init_notifier" flag is set by the glue drivers requiring refclk from
the host to complete the DWC core initialization. Also, those drivers will
send a notification to the EPF drivers once the initialization is fully
completed using the pci_epc_init_notify() API. Only then, the EPF drivers
will start functioning.
For the rest of the drivers generating refclk locally, EPF drivers will
start functioning post binding with them. EPF drivers rely on the
'core_init_notifier' flag to differentiate between the drivers.
Unfortunately, this creates two different flows for the EPF drivers.
So to avoid that, let's get rid of the "core_init_notifier" flag and follow
a single initialization flow for the EPF drivers. This is done by calling
the dw_pcie_ep_init_notify() from all glue drivers after the completion of
dw_pcie_ep_init_registers() API. This will allow all the glue drivers to
send the notification to the EPF drivers once the initialization is fully
completed.
Only difference here is that, the drivers requiring refclk from host will
send the notification once refclk is received, while others will send it
during probe time itself.
But this also requires the EPC core driver to deliver the notification
after EPF driver bind. Because, the glue driver can send the notification
before the EPF drivers bind() and in those cases the EPF drivers will miss
the event. To accommodate this, EPC core is now caching the state of the
EPC initialization in 'init_complete' flag and pci-ep-cfs driver sends the
notification to EPF drivers based on that after each EPF driver bind.
Link: https://lore.kernel.org/linux-pci/20240327-pci-dbi-rework-v12-8-082625472414@linaro.org
Tested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Currently, dw_pcie_ep_init_registers() API is directly called by the glue
drivers requiring active refclk from host. But for the other drivers, it is
getting called implicitly by dw_pcie_ep_init(). This is due to the fact
that this API initializes DWC EP specific registers and that requires an
active refclk (either from host or generated locally by endpoint itsef).
But, this causes a discrepancy among the glue drivers. So to avoid this
confusion, let's call this API directly from all glue drivers irrespective
of refclk dependency. Only difference here is that the drivers requiring
refclk from host will call this API only after the refclk is received and
other drivers without refclk dependency will call this API right after
dw_pcie_ep_init().
With this change, the check for 'core_init_notifier' flag can now be
dropped from dw_pcie_ep_init() API. This will also allow us to remove the
'core_init_notifier' flag completely in the later commits.
Link: https://lore.kernel.org/linux-pci/20240327-pci-dbi-rework-v12-7-082625472414@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
The goal of the dw_pcie_ep_init_complete() API is to initialize the DWC
specific registers post registering the controller with the EP framework.
But the naming doesn't reflect its functionality and causes confusion. So,
let's rename it to dw_pcie_ep_init_registers() to make it clear that it
initializes the DWC specific registers.
Link: https://lore.kernel.org/linux-pci/20240327-pci-dbi-rework-v12-6-082625472414@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
For DWC glue drivers supporting PERST# (currently Qcom and Tegra194), some
of the DWC resources like eDMA should be cleaned up during the PERST#
assert time.
So let's introduce a dw_pcie_ep_cleanup() API that could be called by these
drivers to cleanup the DWC specific resources. Currently, it just removes
eDMA.
Closes: https://lore.kernel.org/linux-pci/ZWYmX8Y%2F7Q9WMxES@x1-carbon
Link: https://lore.kernel.org/linux-pci/20240327-pci-dbi-rework-v12-5-082625472414@linaro.org
Reported-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
dw_pcie_ep_exit() API is undoing what the dw_pcie_ep_init() API has done
already (at least partly). But the API name dw_pcie_ep_exit() is not quite
reflecting that. So let's rename it to dw_pcie_ep_deinit() to make the
purpose of this API clear. This also aligns with the DWC host driver.
Link: https://patchwork.kernel.org/project/linux-pci/patch/20240327-pci-dbi-rework-v12-4-082625472414@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
deinit() callback was solely introduced for the pcie-rcar-gen4 driver where
it is used to do platform specific resource deallocation. And this callback
is called right at the end of the dw_pcie_ep_exit() API. So it doesn't
matter whether it is called within or outside of dw_pcie_ep_exit() API.
So let's remove this callback and directly call rcar_gen4_pcie_ep_deinit()
in pcie-rcar-gen4 driver to do resource deallocation after the completion
of dw_pcie_ep_exit() API in rcar_gen4_remove_dw_pcie_ep().
This simplifies the DWC layer.
Link: https://lore.kernel.org/linux-pci/20240327-pci-dbi-rework-v12-3-082625472414@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
All of the APIs are missing the Kernel-doc comments. Hence, add them.
Link: https://lore.kernel.org/linux-pci/20240327-pci-dbi-rework-v12-2-082625472414@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
The DWC glue drivers requiring an active reference clock from the PCIe host
for initializing their PCIe EP core, set a flag called 'core_init_notifier'
to let DWC driver know that these drivers need a special attention during
initialization. In these drivers, access to the hw registers (like DBI)
before receiving the active refclk from host will result in access failure
and also could cause a whole system hang.
But the current DWC EP driver doesn't honor the requirements of the drivers
setting 'core_init_notifier' flag and tries to access the DBI registers
during dw_pcie_ep_init(). This causes the system hang for glue drivers such
as Tegra194 and Qcom EP as they depend on refclk from host and have set the
above mentioned flag.
To workaround this issue, users of the affected platforms have to maintain
the dependency with the PCIe host by booting the PCIe EP after host boot.
But this won't provide a good user experience, since PCIe EP is _one_ of
the features of those platforms and it doesn't make sense to delay the
whole platform booting due to PCIe requiring active refclk.
So to fix this issue, let's move all the DBI access from
dw_pcie_ep_init() in the DWC EP driver to the dw_pcie_ep_init_complete()
API. This API will only be called by the drivers setting
'core_init_notifier' flag once refclk is received from host. For the rest
of the drivers that gets the refclk locally, this API will be called
within dw_pcie_ep_init().
Link: https://lore.kernel.org/linux-pci/20240327-pci-dbi-rework-v12-1-082625472414@linaro.org
Fixes: e966f7390d ("PCI: dwc: Refactor core initialization code for EP mode")
Co-developed-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Ever since commit f25b5fae29 ("PCI: endpoint: Setting a BAR size > 4 GB
is invalid if 64-bit flag is not set") it has been impossible to get the
.set_bar() callback with a BAR size > 2 GB (yes, 2GB!), if the BAR was
also not requested to be configured as a 64-bit BAR.
It is however possible that an EPF driver configures a BAR as 64-bit,
even if the requested size is < 4 GB.
Respect the requested BAR configuration, just like how it is already
respected with regards to the prefetchable bit.
Link: https://lore.kernel.org/linux-pci/20240320113157.322695-8-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Ever since commit f25b5fae29 ("PCI: endpoint: Setting a BAR size > 4 GB
is invalid if 64-bit flag is not set") it has been impossible to get the
.set_bar() callback with a BAR size > 2 GB (yes, 2GB!), if the BAR was
also not requested to be configured as a 64-bit BAR.
Thus, forcing setting the 64-bit flag for BARs larger than 2 GB in the
lower level driver is dead code and can be removed.
It is however possible that an EPF driver configures a BAR as 64-bit,
even if the requested size is < 4 GB.
Respect the requested BAR configuration, just like how it is already
respected with regards to the prefetchable bit.
Link: https://lore.kernel.org/linux-pci/20240320113157.322695-7-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-----BEGIN PGP SIGNATURE-----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=AP3I
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Consolidate interrupt related code in irq.c (Ilpo Järvinen)
- Reduce kernel size by replacing sysfs resource macros with
functions (Ilpo Järvinen)
- Reduce kernel size by compiling sysfs support only when
CONFIG_SYSFS=y (Lukas Wunner)
- Avoid using Extended Tags on 3ware-9650SE Root Port to work around
an apparent hardware defect (Jörg Wedekind)
Resource management:
- Fix an MMIO mapping leak in pci_iounmap() (Philipp Stanner)
- Move pci_iomap.c and other PCI-specific devres code to drivers/pci
(Philipp Stanner)
- Consolidate PCI devres code in devres.c (Philipp Stanner)
Power management:
- Avoid D3cold on Asus B1400 PCI-NVMe bridge, where firmware doesn't
know how to return correctly to D0, and remove previous quirk that
wasn't as specific (Daniel Drake)
- Allow runtime PM when the driver enables it but doesn't need any
runtime PM callbacks (Raag Jadav)
- Drain runtime-idle callbacks before driver removal to avoid races
between .remove() and .runtime_idle(), which caused intermittent
page faults when the rtsx .runtime_idle() accessed registers that
its .remove() had already unmapped (Rafael J. Wysocki)
Virtualization:
- Avoid Secondary Bus Reset on LSI FW643 so it can be assigned to VMs
with VFIO, e.g., for professional audio software on many Apple
machines, at the cost of leaking state between VMs (Edmund Raile)
Error handling:
- Print all logged TLP Prefixes, not just the first, after AER or DPC
errors (Ilpo Järvinen)
- Quirk the DPC PIO log size for Intel Raptor Lake Root Ports, which
still don't advertise a legal size (Paul Menzel)
- Ignore expected DPC Surprise Down errors on hot removal (Smita
Koralahalli)
- Block runtime suspend while handling AER errors to avoid races that
prevent the device form being resumed from D3hot (Stanislaw
Gruszka)
Peer-to-peer DMA:
- Use atomic XA allocation in RCU read section (Christophe JAILLET)
ASPM:
- Collect bits of ASPM-related code that we need even without
CONFIG_PCIEASPM into aspm.c (David E. Box)
- Save/restore L1 PM Substates config for suspend/resume (David E.
Box)
- Update save_save when ASPM config is changed, so a .slot_reset()
during error recovery restores the changed config, not the
.probe()-time config (Vidya Sagar)
Endpoint framework:
- Refactor and improve pci_epf_alloc_space() API (Niklas Cassel)
- Clean up endpoint BAR descriptions (Niklas Cassel)
- Fix ntb_register_device() name leak in error path (Yang Yingliang)
- Return actual error code for pci_vntb_probe() failure (Yang
Yingliang)
Broadcom STB PCIe controller driver:
- Fix MDIO write polling, which previously never waited for
completion (Jonathan Bell)
Cadence PCIe endpoint driver:
- Clear the ARI "Next Function Number" of last function (Jasko-EXT
Wojciech)
Freescale i.MX6 PCIe controller driver:
- Simplify by replacing switch statements with function pointers for
different hardware variants (Frank Li)
- Simplify by using clk_bulk*() API (Frank Li)
- Remove redundant DT clock and reg/reg-name details (Frank Li)
- Add i.MX95 DT and driver support for both Root Complex and Endpoint
mode (Frank Li)
Microsoft Hyper-V host bridge driver:
- Reduce memory usage by limiting ring buffer size to 16KB instead of
4 pages (Michael Kelley)
Qualcomm PCIe controller driver:
- Add X1E80100 DT and driver support (Abel Vesa)
- Add DT 'required-opps' for SoCs that require a minimum performance
level (Johan Hovold)
- Make DT 'msi-map-mask' optional, depending on how MSI interrupts
are mapped (Johan Hovold)
- Disable ASPM L0s for sc8280xp, sa8540p and sa8295p because the PHY
configuration isn't tuned correctly for L0s (Johan Hovold)
- Split dt-binding qcom,pcie.yaml into qcom,pcie-common.yaml and
separate files for SA8775p, SC7280, SC8180X, SC8280XP, SM8150,
SM8250, SM8350, SM8450, SM8550 for easier reviewing (Krzysztof
Kozlowski)
- Enable BDF to SID translation by disabling bypass mode (Manivannan
Sadhasivam)
- Add endpoint MHI support for Snapdragon SA8775P SoC (Mrinmay
Sarkar)
Synopsys DesignWare PCIe controller driver:
- Allocate 64-bit MSI address if no 32-bit address is available (Ajay
Agarwal)
- Fix endpoint Resizable BAR to actually advertise the required 1MB
size (Niklas Cassel)
MicroSemi Switchtec management driver:
- Release resources if the .probe() fails (Christophe JAILLET)
Miscellaneous:
- Make pcie_port_bus_type const (Ricardo B. Marliere)"
* tag 'pci-v6.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (77 commits)
PCI/ASPM: Update save_state when configuration changes
PCI/ASPM: Disable L1 before configuring L1 Substates
PCI/ASPM: Call pci_save_ltr_state() from pci_save_pcie_state()
PCI/ASPM: Save L1 PM Substates Capability for suspend/resume
PCI: hv: Fix ring buffer size calculation
PCI: dwc: endpoint: Fix advertised resizable BAR size
PCI: cadence: Clear the ARI Capability Next Function Number of the last function
PCI: dwc: Strengthen the MSI address allocation logic
PCI: brcmstb: Fix broken brcm_pcie_mdio_write() polling
PCI: qcom: Add X1E80100 PCIe support
dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller
PCI: qcom: Enable BDF to SID translation properly
PCI/AER: Generalize TLP Header Log reading
PCI/AER: Use explicit register size for PCI_ERR_CAP
PCI: qcom: Disable ASPM L0s for sc8280xp, sa8540p and sa8295p
dt-bindings: PCI: qcom: Do not require 'msi-map-mask'
dt-bindings: PCI: qcom: Allow 'required-opps'
PCI/AER: Block runtime suspend when handling errors
PCI/ASPM: Move pci_save_ltr_state() to aspm.c
PCI/ASPM: Always build aspm.c
...
- Split dt-binding qcom,pcie.yaml into qcom,pcie-common.yaml and separate
files for SA8775p, SC7280, SC8180X, SC8280XP, SM8150, SM8250, SM8350,
SM8450, SM8550 for easier reviewing (Krzysztof Kozlowski)
- Allow 'required-opps' DT property for SoCs that require a minimum
performance level for the power domain (Johan Hovold)
- Remove requirement for 'msi-map-mask' DT property since it depends on how
MSIs are mapped (Johan Hovold)
- Disable ASPM L0s for sc8280xp, sa8540p and sa8295p because their PHY
configuration isn't tuned for L0s, which results in many Correctable
Errors (Johan Hovold)
- Enable BDF to SID translation by disabling bypass mode (Manivannan
Sadhasivam)
- Add DT binding and driver support for X1E80100 (Abel Vesa)
* pci/controller/qcom:
PCI: qcom: Add X1E80100 PCIe support
dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller
PCI: qcom: Enable BDF to SID translation properly
PCI: qcom: Disable ASPM L0s for sc8280xp, sa8540p and sa8295p
dt-bindings: PCI: qcom: Do not require 'msi-map-mask'
dt-bindings: PCI: qcom: Allow 'required-opps'
dt-bindings: PCI: qcom,pcie-sa8775p: Move SA8775p to dedicated schema
dt-bindings: PCI: qcom,pcie-sc7280: Move SC7280 to dedicated schema
dt-bindings: PCI: qcom,pcie-sc8180x: Move SC8180X to dedicated schema
dt-bindings: PCI: qcom,pcie-sc8280xp: Move SC8280XP to dedicated schema
dt-bindings: PCI: qcom,pcie-sm8350: Move SM8350 to dedicated schema
dt-bindings: PCI: qcom,pcie-sm8150: Move SM8150 to dedicated schema
dt-bindings: PCI: qcom,pcie-sm8250: Move SM8250 to dedicated schema
dt-bindings: PCI: qcom,pcie-sm8450: Move SM8450 to dedicated schema
dt-bindings: PCI: qcom,pcie-sm8550: Move SM8550 to dedicated schema
- Fix ring buffer size at 16KB (not 4 pages), which reduces memory usage by
128KBytes with 64KB pages (Michael Kelley)
* pci/controller/hyperv:
PCI: hv: Fix ring buffer size calculation
- Fall back to allocating 64-bit MSI DMA address if unable to allocate a
32-bit address (Ajay Agarwal)
* pci/controller/dwc:
PCI: dwc: endpoint: Fix advertised resizable BAR size
PCI: dwc: Strengthen the MSI address allocation logic
- Clear the ARI Capability Next Function Number of the last function
(Jasko-EXT Wojciech)
* pci/controller/cadence:
PCI: cadence: Clear the ARI Capability Next Function Number of the last function
- Fix polling for MDIO write completion, which previously used the wrong
access width so it always indicated "completed" (Jonathan Bell)
* pci/controller/broadcom:
PCI: brcmstb: Fix broken brcm_pcie_mdio_write() polling
For a physical PCI device that is passed through to a Hyper-V guest VM,
current code specifies the VMBus ring buffer size as 4 pages. But this
is an inappropriate dependency, since the amount of ring buffer space
needed is unrelated to PAGE_SIZE. For example, on x86 the ring buffer
size ends up as 16 Kbytes, while on ARM64 with 64 Kbyte pages, the ring
size bloats to 256 Kbytes. The ring buffer for PCI pass-thru devices
is used for only a few messages during device setup and removal, so any
space above a few Kbytes is wasted.
Fix this by declaring the ring buffer size to be a fixed 16 Kbytes.
Furthermore, use the VMBUS_RING_SIZE() macro so that the ring buffer
header is properly accounted for, and so the size is rounded up to a
page boundary, using the page size for which the kernel is built. While
w/64 Kbyte pages this results in a 64 Kbyte ring buffer header plus a
64 Kbyte ring buffer, that's the smallest possible with that page size.
It's still 128 Kbytes better than the current code.
Link: https://lore.kernel.org/linux-pci/20240216202240.251818-1-mhklinux@outlook.com
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Jarvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Long Li <longli@microsoft.com>
Cc: <stable@vger.kernel.org> # 5.15.x
The commit message in commit fc9a77040b ("PCI: designware-ep: Configure
Resizable BAR cap to advertise the smallest size") claims that it modifies
the Resizable BAR capability to only advertise support for 1 MB size BARs.
However, the commit writes all zeroes to PCI_REBAR_CAP (the register which
contains the possible BAR sizes that a BAR be resized to).
According to the spec, it is illegal to not have a bit set in
PCI_REBAR_CAP, and 1 MB is the smallest size allowed.
Set bit 4 in PCI_REBAR_CAP, so that we actually advertise support for a
1 MB BAR size.
Before:
Capabilities: [2e8 v1] Physical Resizable BAR
BAR 0: current size: 1MB
BAR 1: current size: 1MB
BAR 2: current size: 1MB
BAR 3: current size: 1MB
BAR 4: current size: 1MB
BAR 5: current size: 1MB
After:
Capabilities: [2e8 v1] Physical Resizable BAR
BAR 0: current size: 1MB, supported: 1MB
BAR 1: current size: 1MB, supported: 1MB
BAR 2: current size: 1MB, supported: 1MB
BAR 3: current size: 1MB, supported: 1MB
BAR 4: current size: 1MB, supported: 1MB
BAR 5: current size: 1MB, supported: 1MB
Fixes: fc9a77040b ("PCI: designware-ep: Configure Resizable BAR cap to advertise the smallest size")
Link: https://lore.kernel.org/linux-pci/20240307111520.3303774-1-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: <stable@vger.kernel.org> # 5.2
Next Function Number field in ARI Capability Register for last function
must be zero by default as per the PCIe specification, indicating there
is no next higher number function but that's not happening in our case,
so this patch clears the Next Function Number field for last function
used.
[kwilczynski: white spaces update for one define]
Link: https://lore.kernel.org/linux-pci/20231202085015.3048516-1-s-vadapalli@ti.com
Signed-off-by: Jasko-EXT Wojciech <wojciech.jasko-EXT@continental-corporation.com>
Signed-off-by: Achal Verma <a-verma1@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
There can be platforms that do not use/have 32-bit DMA addresses.
The current implementation of 32-bit IOVA allocation can fail for
such platforms, eventually leading to the probe failure.
Try to allocate a 32-bit msi_data. If this allocation fails,
attempt a 64-bit address allocation. Please note that if the
64-bit MSI address is allocated, then the EPs supporting 32-bit
MSI address only will not work.
Link: https://lore.kernel.org/linux-pci/20240221153840.1789979-1-ajayagarwal@google.com
Tested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Ajay Agarwal <ajayagarwal@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Will McVicker <willmcvicker@google.com>
The MDIO_WT_DONE() macro tests bit 31, which is always 0 (== done) as
readw_poll_timeout_atomic() does a 16-bit read. Replace with the readl
variant.
[kwilczynski: commit log]
Fixes: ca5dcc7631 ("PCI: brcmstb: Replace status loops with read_poll_timeout_atomic()")
Link: https://lore.kernel.org/linux-pci/20240217133722.14391-1-wahrenst@gmx.net
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Add the compatible and the driver data for X1E80100 PCIe controller.
There are 5 controller instances found on this platform, out of which
2 are Gen3 with speeds of up to 8.0GT/s, while the other 3 are Gen4 with
speeds of up to 16GT/s.
The version of the controller is 1.38.0 for all instances, but they are
compatible with 1.9.0 config. The max link width is x8 for one
controller, x4 for two of others and x2 for the two left.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240301-x1e80100-pci-v4-2-7ab7e281d647@linaro.org
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Qcom SoCs making use of ARM SMMU require BDF to SID translation table in
the driver to properly map the SID for the PCIe devices based on their BDF
identifier. This is currently achieved with the help of
qcom_pcie_config_sid_1_9_0() function for SoCs supporting the 1_9_0 config.
But With newer Qcom SoCs starting from SM8450, BDF to SID translation is
set to bypass mode by default in hardware. Due to this, the translation
table that is set in the qcom_pcie_config_sid_1_9_0() is essentially
unused and the default SID is used for all endpoints in SoCs starting from
SM8450.
This is a security concern and also warrants swapping the DeviceID in DT
while using the GIC ITS to handle MSIs from endpoints. The swapping is
currently done like below in DT when using GIC ITS:
/*
* MSIs for BDF (1:0.0) only works with Device ID 0x5980.
* Hence, the IDs are swapped.
*/
msi-map = <0x0 &gic_its 0x5981 0x1>,
<0x100 &gic_its 0x5980 0x1>;
Here, swapping of the DeviceIDs ensure that the endpoint with BDF (1:0.0)
gets the DeviceID 0x5980 which is associated with the default SID as per
the iommu mapping in DT. So MSIs were delivered with IDs swapped so far.
But this also means the Root Port (0:0.0) won't receive any MSIs (for PME,
AER etc...)
So let's fix these issues by clearing the BDF to SID bypass mode for all
SoCs making use of the 1_9_0 config. This allows the PCIe devices to use
the correct SID, thus avoiding the DeviceID swapping hack in DT and also
achieving the isolation between devices.
Fixes: 4c93988221 ("PCI: qcom: Add support for configuring BDF to SID mapping for SM8250")
Link: https://lore.kernel.org/linux-pci/20240307-pci-bdf-sid-fix-v1-1-9423a7e2d63c@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Cc: stable@vger.kernel.org # 5.11
Commit 9f4f3dfad8 ("PCI: qcom: Enable ASPM for platforms supporting
1.9.0 ops") started enabling ASPM unconditionally when the hardware
claims to support it. This triggers Correctable Errors for some PCIe
devices on machines like the Lenovo ThinkPad X13s when L0s is enabled,
which could indicate an incomplete driver ASPM implementation or that
the hardware does in fact not support L0s.
This has now been confirmed by Qualcomm to be the case for sc8280xp and
its derivate platforms (e.g. sa8540p and sa8295p). Specifically, the PHY
configuration used on these platforms is not correctly tuned for L0s and
there is currently no updated configuration available.
Add a new flag to the driver configuration data and use it to disable
ASPM L0s on sc8280xp, sa8540p and sa8295p for now.
Note that only the 1.9.0 ops enable ASPM currently.
Link: https://lore.kernel.org/r/20240306095651.4551-4-johan+linaro@kernel.org
Fixes: 9f4f3dfad8 ("PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: stable@vger.kernel.org # 6.7
Add iMX95 EP support and add 64bit address support.
The internal bus bridge for PCI support 64bit DMA address in iMX95 hence
call dma_set_mask_and_coherent() to set 64 bit DMA mask.
Link: https://lore.kernel.org/r/20240220161924.3871774-15-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The i.MX EP exhibits variations in epc_features among different EP
configurations. This introduces the addition of epc_features in
imx6_pcie_drvdata to accommodate these differences. It's important to note
that there are no functional changes in this commit; instead, it lays the
groundwork for supporting i.MX95 EP functions.
Link: https://lore.kernel.org/r/20240220161924.3871774-13-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Since the dw_pcie_ep_init() function is already fetching the 'addr_space'
region, no need to do the same in this driver.
Link: https://lore.kernel.org/r/20240220161924.3871774-12-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Instead of using the switch case statement to initialize the PHY handled by
this driver itself, let's introduce a new callback init_phy() and define it
for platforms that require it.
Link: https://lore.kernel.org/r/20240220161924.3871774-7-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add drvdata::mode_off and drvdata::mode_mask to simplify
imx6_pcie_configure_type() logic.
Link: https://lore.kernel.org/r/20240220161924.3871774-6-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add drvdata::ltssm_off and drvdata::ltssm_mask to simplify
imx6_pcie_ltssm_enable(disable)() logic.
Link: https://lore.kernel.org/r/20240220161924.3871774-5-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Refactor the reset handling logic in the imx6 PCI driver by adding
IMX6_PCIE_FLAG_HAS_*_RESET bitmask define for drvdata::flags.
The drvdata::flags and bitmask ensure a cleaner and more scalable
switch-case structure for handling reset.
Link: https://lore.kernel.org/r/20240220161924.3871774-4-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Since some i.MX platforms make use of a separate PHY driver, use
IMX6_PCIE_FLAG_HAS_PHYDRV flag to identify them and get the reference to
PHY from DT to simplify the code.
Link: https://lore.kernel.org/r/20240220161924.3871774-3-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Refactor the clock handling logic. Add 'clk_names' define in drvdata.
Use clk_bulk*() API to simplify the code.
Link: https://lore.kernel.org/r/20240220161924.3871774-2-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The definition of a reserved BAR is that EPF drivers should not touch
them.
The definition of only_64bit is that the EPF driver must configure this
BAR as 64-bit. (An EPF driver is not allowed to choose if this BAR should
be configured as 32-bit or 64-bit.)
Thus, it does not make sense to put only_64bit of a BAR that EPF drivers
are not allow to touch.
Drop the only_64bit property from hardware descriptions that are of type
reserved BAR.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Kishon Vijay Abraham I <kishon@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240216134524.1142149-3-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The hardware description for BARs is scattered in many different variables
in pci_epc_features. Some of these things are mutually exclusive, so it
can create confusion over which variable that has precedence over another.
Improve the situation by creating a struct pci_epc_bar_desc, and a new
enum pci_epc_bar_type, and convert the endpoint controller drivers to use
this more well defined format.
Additionally, some endpoint controller drivers mark the BAR succeeding a
"64-bit only BAR" as reserved, while some do not. By definition, a 64-bit
BAR uses the succeeding BAR for the upper 32-bits, so an EPF driver cannot
use a BAR succeeding a 64-bit BAR. Ensure that all endpoint controller
drivers are uniform, and actually describe a reserved BAR as reserved.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Kishon Vijay Abraham I <kishon@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240216134524.1142149-2-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-----BEGIN PGP SIGNATURE-----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=jJks
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Fix an unintentional truncation of DWC MSI-X address to 32 bits and
update similar MSI code to match (Dan Carpenter)
* tag 'pci-v6.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: dwc: Clean up dw_pcie_ep_raise_msi_irq() alignment
PCI: dwc: Fix a 64bit bug in dw_pcie_ep_raise_msix_irq()
I recently changed the alignment code in dw_pcie_ep_raise_msix_irq(). The
code in dw_pcie_ep_raise_msi_irq() is similar, so update it to match, just
for consistency. (No effect on runtime, just a cleanup).
Link: https://lore.kernel.org/r/184097e0-c728-42c7-9e8a-556bd33fb612@moroto.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The "msg_addr" variable is u64. However, the "aligned_offset" is an
unsigned int. This means that when the code does:
msg_addr &= ~aligned_offset;
it will unintentionally zero out the high 32 bits. Use ALIGN_DOWN() to do
the alignment instead.
Fixes: 2217fffcd6 ("PCI: dwc: endpoint: Fix dw_pcie_ep_raise_msix_irq() alignment support")
Link: https://lore.kernel.org/r/af59c7ad-ab93-40f7-ad4a-7ac0b14d37f5@moroto.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: <stable@vger.kernel.org>
A last minute revert in 6.7-final introduced a potential deadlock when
enabling ASPM during probe of Qualcomm PCIe controllers as reported by
lockdep:
============================================
WARNING: possible recursive locking detected
6.7.0 #40 Not tainted
--------------------------------------------
kworker/u16:5/90 is trying to acquire lock:
ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc
but task is already holding lock:
ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(pci_bus_sem);
lock(pci_bus_sem);
*** DEADLOCK ***
Call trace:
print_deadlock_bug+0x25c/0x348
__lock_acquire+0x10a4/0x2064
lock_acquire+0x1e8/0x318
down_read+0x60/0x184
pcie_aspm_pm_state_change+0x58/0xdc
pci_set_full_power_state+0xa8/0x114
pci_set_power_state+0xc4/0x120
qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom]
pci_walk_bus+0x64/0xbc
qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom]
The deadlock can easily be reproduced on machines like the Lenovo ThinkPad
X13s by adding a delay to increase the race window during asynchronous
probe where another thread can take a write lock.
Add a new pci_set_power_state_locked() and associated helper functions that
can be called with the PCI bus semaphore held to avoid taking the read lock
twice.
Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com
Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org
Fixes: f93e71aea6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: <stable@vger.kernel.org> # 6.7
-----BEGIN PGP SIGNATURE-----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=ri0M
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Reserve ECAM so we don't assign it to PCI BARs; this works around
bugs where BIOS included ECAM in a PNP0A03 host bridge window,
didn't reserve it via a PNP0C02 motherboard device, and didn't
allocate space for SR-IOV VF BARs (Bjorn Helgaas)
- Add MMCONFIG/ECAM debug logging (Bjorn Helgaas)
- Rename 'MMCONFIG' to 'ECAM' to match spec usage (Bjorn Helgaas)
- Log device type (Root Port, Switch Port, etc) during enumeration
(Bjorn Helgaas)
- Log bridges before downstream devices so the dmesg order is more
logical (Bjorn Helgaas)
- Log resource names (BAR 0, VF BAR 0, bridge window, etc)
consistently instead of a mix of names and "reg 0x10" (Puranjay
Mohan, Bjorn Helgaas)
- Fix 64GT/s effective data rate calculation to use 1b/1b encoding
rather than the 8b/10b or 128b/130b used by lower rates (Ilpo
Järvinen)
- Use PCI_HEADER_TYPE_* instead of literals in x86, powerpc, SCSI
lpfc (Ilpo Järvinen)
- Clean up open-coded PCIBIOS return code mangling (Ilpo Järvinen)
Resource management:
- Restructure pci_dev_for_each_resource() to avoid computing the
address of an out-of-bounds array element (the bounds check was
performed later so the element was never actually *read*, but it's
nicer to avoid even computing an out-of-bounds address) (Andy
Shevchenko)
Driver binding:
- Convert pci-host-common.c platform .remove() callback to
.remove_new() returning 'void' since it's not useful to return
error codes here (Uwe Kleine-König)
- Convert exynos, keystone, kirin from .remove() to .remove_new(),
which returns void instead of int (Uwe Kleine-König)
- Drop unused struct pci_driver.node member (Mathias Krause)
Virtualization:
- Add ACS quirk for more Zhaoxin Root Ports (LeoLiuoc)
Error handling:
- Log AER errors as "Correctable" (not "Corrected") or
"Uncorrectable" to match spec terminology (Bjorn Helgaas)
- Decode Requester ID when no error info found instead of printing
the raw hex value (Bjorn Helgaas)
Endpoint framework:
- Use a unique test pattern for each BAR in the pci_endpoint_test to
make it easier to debug address translation issues (Niklas Cassel)
Broadcom STB PCIe controller driver:
- Add DT property "brcm,clkreq-mode" and driver support for different
CLKREQ# modes to make ASPM L1.x states possible (Jim Quinlan)
Freescale Layerscape PCIe controller driver:
- Add suspend/resume support for Layerscape LS1043a and LS1021a,
including software-managed PME_Turn_Off and transitions between L0,
L2/L3_Ready Link states (Frank Li)
MediaTek PCIe controller driver:
- Clear MSI interrupt status before handler to avoid missing MSIs
that occur after the handler (qizhong cheng)
MediaTek PCIe Gen3 controller driver:
- Update mediatek-gen3 translation window setup to handle MMIO space
that is not a power of two in size (Jianjun Wang)
Qualcomm PCIe controller driver:
- Increase qcom iommu-map maxItems to accommodate SDX55 (five
entries) and SDM845 (sixteen entries) (Krzysztof Kozlowski)
- Describe qcom,pcie-sc8180x clocks and resets accurately (Krzysztof
Kozlowski)
- Describe qcom,pcie-sm8150 clocks and resets accurately (Krzysztof
Kozlowski)
- Correct the qcom "reset-name" property, previously incorrectly
called "reset-names" (Krzysztof Kozlowski)
- Document qcom,pcie-sm8650, based on qcom,pcie-sm8550 (Neil
Armstrong)
Renesas R-Car PCIe controller driver:
- Replace of_device.h with explicit of.h include to untangle header
usage (Rob Herring)
- Add DT and driver support for optional miniPCIe 1.5v and 3.3v
regulators on KingFisher (Wolfram Sang)
SiFive FU740 PCIe controller driver:
- Convert fu740 CONFIG_PCIE_FU740 dependency from SOC_SIFIVE to
ARCH_SIFIVE (Conor Dooley)
Synopsys DesignWare PCIe controller driver:
- Align iATU mapping for endpoint MSI-X (Niklas Cassel)
- Drop "host_" prefix from struct dw_pcie_host_ops members (Yoshihiro
Shimoda)
- Drop "ep_" prefix from struct dw_pcie_ep_ops members (Yoshihiro
Shimoda)
- Rename struct dw_pcie_ep_ops.func_conf_select() to
.get_dbi_offset() to be more descriptive (Yoshihiro Shimoda)
- Add Endpoint DBI accessors to encapsulate offset lookups (Yoshihiro
Shimoda)
TI J721E PCIe driver:
- Add j721e DT and driver support for 'num-lanes' for devices that
support x1, x2, or x4 Links (Matt Ranostay)
- Add j721e DT compatible strings and driver support for j784s4 (Matt
Ranostay)
- Make TI J721E Kconfig depend on ARCH_K3 since the hardware is
specific to those TI SoC parts (Peter Robinson)
TI Keystone PCIe controller driver:
- Hold power management references to all PHYs while enabling them to
avoid a race when one provides clocks to others (Siddharth
Vadapalli)
Xilinx XDMA PCIe controller driver:
- Remove redundant dev_err(), since platform_get_irq() and
platform_get_irq_byname() already log errors (Yang Li)
- Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()
(Krzysztof Wilczyński)
- Fix xilinx_pl_dma_pcie_init_irq_domain() error return when
irq_domain_add_linear() fails (Harshit Mogalapalli)
MicroSemi Switchtec management driver:
- Do dma_mrpc cleanup during switchtec_pci_remove() to match its devm
ioremapping in switchtec_pci_probe(). Previously the cleanup was
done in stdev_release(), which used stale pointers if stdev->cdev
happened to be open when the PCI device was removed (Daniel
Stodden)
Miscellaneous:
- Convert interrupt terminology from "legacy" to "INTx" to be more
specific and match spec terminology (Damien Le Moal)
- In dw-xdata-pcie, pci_endpoint_test, and vmd, replace usage of
deprecated ida_simple_*() API with ida_alloc() and ida_free()
(Christophe JAILLET)"
* tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Fix kernel-doc issues
PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream device
dt-bindings: PCI: brcmstb: Add property "brcm,clkreq-mode"
PCI: mediatek-gen3: Fix translation window size calculation
PCI: mediatek: Clear interrupt status before dispatching handler
PCI: keystone: Fix race condition when initializing PHYs
PCI: xilinx-xdma: Fix error code in xilinx_pl_dma_pcie_init_irq_domain()
PCI: xilinx-xdma: Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()
PCI: rcar-gen4: Fix -Wvoid-pointer-to-enum-cast error
PCI: iproc: Fix -Wvoid-pointer-to-enum-cast warning
PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpers
PCI: dwc: Rename .func_conf_select to .get_dbi_offset in struct dw_pcie_ep_ops
PCI: dwc: Rename .ep_init to .init in struct dw_pcie_ep_ops
PCI: dwc: Drop host prefix from struct dw_pcie_host_ops members
misc: pci_endpoint_test: Use a unique test pattern for each BAR
PCI: j721e: Make TI J721E depend on ARCH_K3
PCI: j721e: Add TI J784S4 PCIe configuration
PCI/AER: Use explicit register sizes for struct members
PCI/AER: Decode Requester ID when no error info found
PCI/AER: Use 'Correctable' and 'Uncorrectable' spec terms for errors
...
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more explicit and match spec
terminology (Bjorn Helgaas)
- Use existing PCI_IRQ_INTX, PCI_IRQ_MSI, PCI_IRQ_MSIX in artpec6, cadence,
designware, designware-plat, dra7xx, imx6, keembay, keystone, layerscape,
mhi, ntb, qcom, rcar, rcar-gen4, rockchip, tegra194, uniphier, vntb; drop
the redundant pci_epc_irq_type enum with the same values (Damien Le Moal)
- Use "intx" instead of "leg" or "legacy" when describing INTx interrupts
in endpoint core, endpoint tests, cadence, dra7xx, designware,
dw-rockchip, dwc core, imx6, keystone, layerscape, qcom, rcar-gen4,
rockchip, tegra194, uniphier, xilinx-nwl (Damien Le Moal)
* pci/irq-clean-up:
PCI: xilinx-nwl: Use INTX instead of legacy
PCI: rockchip-host: Rename rockchip_pcie_legacy_int_handler()
PCI: rockchip-ep: Use INTX instead of legacy
PCI: uniphier: Use INTX instead of legacy
PCI: tegra194: Use INTX instead of legacy
PCI: dw-rockchip: Rename rockchip_pcie_legacy_int_handler()
PCI: keystone: Use INTX instead of legacy
PCI: dwc: Rename dw_pcie_ep_raise_legacy_irq()
PCI: cadence: Use INTX instead of legacy
PCI: dra7xx: Rename dra7xx_pcie_raise_legacy_irq()
misc: pci_endpoint_test: Use INTX instead of LEGACY
PCI: endpoint: Rename LEGACY to INTX in test function driver
PCI: endpoint: Use INTX instead of legacy
PCI: endpoint: Drop PCI_EPC_IRQ_XXX definitions
PCI: Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX
- Use ida_alloc() instead of deprecated ida_simple_get() (Christophe JAILLET)
* pci/controller/vmd:
PCI: vmd: Remove usage of the deprecated ida_simple_xx() API
- Replace of_device.h with explicit of.h include to untangle header usage
(Rob Herring)
- Add DT and driver support for optional miniPCIe 1.5v and 3.3v regulators
on KingFisher (Wolfram Sang)
* pci/controller/rcar:
PCI: rcar-host: Add support for optional regulators
dt-bindings: PCI: rcar-pci-host: Add optional regulators
PCI: rcar-gen4: Replace of_device.h with explicit of.h include
- Clear MSI interrupt status before handler to avoid missing MSIs that
occur after the handler (qizhong cheng)
- Update mediatek-gen3 translation window setup to handle MMIO space that
is not a power of two in size (Jianjun Wang)
* pci/controller/mediatek:
PCI: mediatek-gen3: Fix translation window size calculation
PCI: mediatek: Clear interrupt status before dispatching handler
- Add suspend/resume support for Layerscape LS1043a, including
software-managed PME_Turn_Off and transitions between L0, L2/L3_Ready
Link states (Frank Li)
* pci/controller/layerscape:
PCI: layerscape: Add suspend/resume for ls1043a
PCI: layerscape(ep): Rename pf_* as pf_lut_*
PCI: layerscape: Add suspend/resume for ls1021a
PCI: layerscape: Add function pointer for exit_from_l2()
- Use devm_kasprintf() to dynamically allocate clock names, removing need
for an intermediate buffer (Christophe JAILLET)
* pci/controller/kirin:
PCI: kirin: Use devm_kasprintf() to dynamically allocate clock names
- Hold power management references to all PHYs while enabling them to avoid
a race when one provides clocks to others (Siddharth Vadapalli)
* pci/controller/keystone:
PCI: keystone: Fix race condition when initializing PHYs
- Add j721e DT and driver support for 'num-lanes' for devices that support
x1, x2, or x4 Links (Matt Ranostay)
- Add j721e DT compatible strings and driver support for j784s4 (Matt Ranostay)
- Make TI J721E Kconfig depend on ARCH_K3 since the hardware is specific to
those TI SoC parts (Peter Robinson)
* pci/controller/cadence:
PCI: j721e: Make TI J721E depend on ARCH_K3
PCI: j721e: Add TI J784S4 PCIe configuration
PCI: j721e: Add PCIe 4x lane selection support
PCI: j721e: Add per platform maximum lane settings
dt-bindings: PCI: ti,j721e-pci-*: Add j784s4-pci-* compatible strings
dt-bindings: PCI: ti,j721e-pci-*: Add checks for num-lanes
The Broadcom STB/CM PCIe HW core, which is also used in RPi SOCs, must be
deliberately set by the PCIe RC HW into one of three mutually exclusive
modes:
"safe" -- No CLKREQ# expected or required, refclk is always provided. This
mode should work for all devices but is not be capable of any refclk
power savings.
"no-l1ss" -- CLKREQ# is expected to be driven by the downstream device for
CPM and ASPM L0s and L1. Provides Clock Power Management, L0s, and L1,
but cannot provide L1 substate (L1SS) power savings. If the downstream
device connected to the RC is L1SS capable AND the OS enables L1SS, all
PCIe traffic may abruptly halt, potentially hanging the system.
"default" -- Bidirectional CLKREQ# between the RC and downstream device.
Provides ASPM L0s, L1, and L1SS, but not compliant to provide Clock
Power Management; specifically, may not be able to meet the T_CLRon max
timing of 400ns as specified in "Dynamic Clock Control", section
3.2.5.2.2 of the PCIe Express Mini CEM 2.1 specification. This
situation is atypical and should happen only with older devices.
Previously, this driver always set the mode to "no-l1ss", as almost all
STB/CM boards operate in this mode. But now there is interest in
activating L1SS power savings from STB/CM customers, which requires "aspm"
mode. In addition, a bug was filed for RPi4 CM platform because most
devices did not work in "no-l1ss" mode.
Note that the mode is specified by the DT property "brcm,clkreq-mode". If
this property is omitted, then "default" mode is chosen.
Note: Since L1 substates are now possible, a modification was made
regarding an internal bus timeout: During long periods of the PCIe RC HW
being in an L1SS sleep state, there may be a timeout on an internal bus
access, even though there may not be any PCIe access involved. Such a
timeout will cause a subsequent CPU abort.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217276
Link: https://lore.kernel.org/linux-pci/20231113185607.1756-3-james.quinlan@broadcom.com
Tested-by: Cyril Brulebois <cyril@debamax.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
When using the fls() helper, the translation table should be a power of
two; otherwise, the resulting value will not be correct.
For example, given fls(0x3e00000) - 1 = 25, the PCIe translation window
size will be set to 0x2000000 instead of the expected size 0x3e00000.
Fix the translation window by splitting the MMIO space into multiple tables
if its size is not a power of two.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20231023081423.18559-1-jianjun.wang@mediatek.com
Fixes: d3bf75b579 ("PCI: mediatek-gen3: Add MediaTek Gen3 driver for MT8192")
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
We found a failure when using the iperf tool during WiFi performance
testing, where some MSIs were received while clearing the interrupt
status, and these MSIs cannot be serviced.
The interrupt status can be cleared even if the MSI status remains pending.
As such, given the edge-triggered interrupt type, its status should be
cleared before being dispatched to the handler of the underling device.
[kwilczynski: commit log, code comment wording]
Link: https://lore.kernel.org/linux-pci/20231211094923.31967-1-jianjun.wang@mediatek.com
Fixes: 43e6409db6 ("PCI: mediatek: Add MSI support for MT2712 and MT7622")
Signed-off-by: qizhong cheng <qizhong.cheng@mediatek.com>
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: rewrap comment]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: <stable@vger.kernel.org>
The PCI driver invokes the PHY APIs using the ks_pcie_enable_phy()
function. The PHY in this case is the Serdes. It is possible that the
PCI instance is configured for two lane operation across two different
Serdes instances, using one lane of each Serdes.
In such a configuration, if the reference clock for one Serdes is
provided by the other Serdes, it results in a race condition. After the
Serdes providing the reference clock is initialized by the PCI driver by
invoking its PHY APIs, it is not guaranteed that this Serdes remains
powered on long enough for the PHY APIs based initialization of the
dependent Serdes. In such cases, the PLL of the dependent Serdes fails
to lock due to the absence of the reference clock from the former Serdes
which has been powered off by the PM Core.
Fix this by obtaining reference to the PHYs before invoking the PHY
initialization APIs and releasing reference after the initialization is
complete.
Link: https://lore.kernel.org/linux-pci/20230927041845.1222080-1-s-vadapalli@ti.com
Fixes: 49229238ab ("PCI: keystone: Cleanup PHY handling")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Currently, if the function irq_domain_add_linear() fails to allocate
a new IRQ domain and returns NULL, we would then still return a success
from the xilinx_pl_dma_pcie_init_irq_domain() function regardless, as
the PTR_ERR(NULL) would return a value of zero. This is not a desirable
outcome.
Thus, fix the incorrect error code and return the -ENOMEM error code if
the irq_domain_add_linear() fails to allocate a new IRQ domain.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20231030072757.3236546-1-harshit.m.mogalapalli@oracle.com
Fixes: 8d786149d7 ("PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The error paths that follow calls to the devm_request_irq() functions
within the xilinx_pl_dma_pcie_setup_irq() reference an uninitialized
symbol each that also so happens to be incorrect.
Thus, fix this omission and reference the correct variable when invoking
a given dev_err() function following an error.
This problem was found using smatch via the 0-DAY CI Kernel Test service:
drivers/pci/controller/pcie-xilinx-dma-pl.c:638 xilinx_pl_dma_pcie_setup_irq() error: uninitialized symbol 'irq'.
drivers/pci/controller/pcie-xilinx-dma-pl.c:645 xilinx_pl_dma_pcie_setup_irq() error: uninitialized symbol 'irq'.
Fixes: 8d786149d7 ("PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver")
Link: https://lore.kernel.org/oe-kbuild/202312120248.5DblxkBp-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202312120248.5DblxkBp-lkp@intel.com/
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
When building with clang 18 with the -Werror compiler option enabled,
the following error will be reported:
drivers/pci/controller/dwc/pcie-rcar-gen4.c:439:15: error: cast to smaller integer type 'enum dw_pcie_device_mode' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
439 | rcar->mode = (enum dw_pcie_device_mode)of_device_get_match_data(&rcar->pdev->dev);
To fix this issue, cast the data the of_device_get_match_data() helper
returns to uintptr_t rather than the dw_pcie_device_mode enum.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-7-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
When building with clang 18, the following warning will be reported:
drivers/pci/controller/pcie-iproc-platform.c:54:15: warning: cast to smaller integer type 'enum iproc_pcie_type' from 'const void *' [-Wvoid-pointer-to-enum-cast]
55 | pcie->type = (enum iproc_pcie_type) of_device_get_match_data(dev);
To fix this issue, cast the data the of_device_get_match_data() helper
returns to uintptr_t rather than the iproc_pcie_type enum.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-6-yoshihiro.shimoda.uh@renesas.com
Link: https://github.com/ClangBuiltLinux/linux/issues/1910
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The current code calculated some dbi[2] registers' offset by calling
dw_pcie_ep_get_dbi[2]_offset() in each function. To improve the code
readability, add dw_pcie_ep_{read,write}_dbi[2} and some data-width
related helpers.
Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-5-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Since the struct member .func_conf_select makes the intentions behind it
difficult to ascertain from its name alone, rename it to .get_dbi_offset
to make the intended usage more obvious.
[kwilczynski: commmit log]
Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-4-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Since the name of the dw_pcie_ep_ops struct makes it obvious that it's
for the PCIe Endpoint, rename the struct member .ep_init to .init.
[kwilczynski: commit log]
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-3-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Srikanth Thokala <srikanth.thokala@intel.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Since the name of the dw_pcie_host_ops struct makes it obvious that it's
for the PCIe Host, drop the host prefix from the struct members.
[kwilczynski: commit log]
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-2-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Lei Chuanhua <lchuanhua@maxlinear.com>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
The J721E PCIe is hardware specific to TI SoC parts so add a dependency
on that so it's available for those SoC parts and for compile testing but
not necessarily everyone who enables the Cadence PCIe controller.
Link: https://lore.kernel.org/linux-pci/20240104213910.1426843-1-pbrobinson@gmail.com
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
In the xilinx-nwl controller driver, change all use of "legacy" and
"leg" to "intx", to match the term used in the PCI specifications.
Link: https://lore.kernel.org/r/20231122060406.14695-17-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Rename the function rockchip_pcie_legacy_int_handler() of the rockchip
host driver to rockchip_pcie_intx_handler() to match the PCI_IRQ_INTX
macro name used to control this function execution, and to match the
term used in the PCI specifications.
Link: https://lore.kernel.org/r/20231122060406.14695-16-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Rename the function rockchip_pcie_ep_send_legacy_irq() of the rockchip
endpoint driver to rockchip_pcie_ep_send_intx_irq(). Uses of the term
"legacy" are also replaced with "INTX" in comments.
Link: https://lore.kernel.org/r/20231122060406.14695-15-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In the Designware uniphier controller driver, including the endpoint
driver, change all names using "legacy" to use "intx", to match the
term used in the PCI specifications.
Link: https://lore.kernel.org/r/20231122060406.14695-14-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In the Designware tegra194 controller driver, change all names using
"legacy" to use "intx", to match the term used in the PCI
specifications.
Link: https://lore.kernel.org/r/20231122060406.14695-13-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Rename the function rockchip_pcie_legacy_int_handler() to
rockchip_pcie_intx_handler() to match the code managing INTX interrupts
(e.g. intx_domain_ops) and the term used in the PCI specifications.
Link: https://lore.kernel.org/r/20231122060406.14695-12-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In the Keystone controller driver, change all names using "legacy" to
use "intx" instead, to match the term used in the PCI specifications.
Given that the field legacy_intc_np of struct keystone_pcie is unused,
this field is removed instead of being renamed.
Link: https://lore.kernel.org/r/20231122060406.14695-11-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Rename the function dw_pcie_ep_raise_legacy_irq() of the Designware
endpoint controller driver to dw_pcie_ep_raise_intx_irq() to match the
name of the PCI_IRQ_INTX macro.
Link: https://lore.kernel.org/r/20231122060406.14695-10-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In the Cadence endpoint controller driver, rename the function
cdns_pcie_ep_send_legacy_irq() to cdns_pcie_ep_send_intx_irq() to match
the macro PCI_IRQ_INTX name. Related comments and messages mentioning
"legacy" are also changed to refer to "intx".
Link: https://lore.kernel.org/r/20231122060406.14695-9-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Rename the function dra7xx_pcie_raise_legacy_irq() to
dra7xx_pcie_raise_intx_irq() to match the use of the PCI_IRQ_INTX macro.
Link: https://lore.kernel.org/r/20231122060406.14695-8-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
linux/pci.h defines the IRQ flags PCI_IRQ_INTX, PCI_IRQ_MSI and
PCI_IRQ_MSIX. Let's use these flags directly instead of the endpoint
definitions provided by enum pci_epc_irq_type. This removes the need
for defining this enum type completely.
Link: https://lore.kernel.org/r/20231122060406.14695-3-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
There is no need to call the dev_err() function directly to print a
custom message when handling an error from either the platform_get_irq()
or platform_get_irq_byname() functions as both are going to display an
appropriate error message in case of a failure.
./drivers/pci/controller/pcie-xilinx-dma-pl.c:688:2-9: line 688 is redundant because platform_get_irq() already prints an error
./drivers/pci/controller/pcie-xilinx-dma-pl.c:702:2-9: line 702 is redundant because platform_get_irq() already prints an error
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7074
Link: https://lore.kernel.org/linux-pci/20231030061242.51475-1-yang.lee@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Commit 6f5e193bfb ("PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get
correct MSI-X table address") modified dw_pcie_ep_raise_msix_irq() to
support iATUs which require a specific alignment.
However, this support cannot have been properly tested.
The whole point is for the iATU to map an address that is aligned,
using dw_pcie_ep_map_addr(), and then let the writel() write to
ep->msi_mem + aligned_offset.
Thus, modify the address that is mapped such that it is aligned.
With this change, dw_pcie_ep_raise_msix_irq() matches the logic in
dw_pcie_ep_raise_msi_irq().
Link: https://lore.kernel.org/linux-pci/20231128132231.2221614-1-nks@flawful.org
Fixes: 6f5e193bfb ("PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: stable@vger.kernel.org # 5.7
Cc: Kishon Vijay Abraham I <kishon@kernel.org>
Use devm_kasprintf() instead of open coding it. This saves the need of
an intermediate buffer.
There was also no reason to use devm_kstrdup_const() as string is known
to be constant.
[kwilczynski: commit log, and add missing Reviewed-by tag]
Link: https://lore.kernel.org/linux-pci/1bad6879083a7d836c8a47418a0afa22485e8f69.1700294127.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
In the error path emit an error message replacing the (less useful)
message by the core. Apart from the improved error message there is no
change in behaviour.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/c3a51791d54deaa818b8526975fc4e16ef1090ce.1701682617.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
In the error path emit an error message replacing the (less useful)
message by the core. Apart from the improved error message there is no
change in behaviour.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/06612aff79dfb52d5b0b20129dff5e4b1f04d3a7.1701682617.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
In the error path emit an error message replacing the (less useful)
message by the core. Apart from the improved error message there is no
change in behaviour.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/50de44ea8931465fd9cdc821854ea761cb43adf6.1701682617.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
As part of converting RISC-V SOC_FOO symbols to ARCH_FOO to match the
use of such symbols on other architectures, convert the SiFive PCI
drivers to use the newer symbol.
Link: https://lore.kernel.org/linux-pci/20230918-safeness-cornflake-62278bc3aaaa@wendy
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The KingFisher board has regulators for miniPCIe, so enable these
optional regulators using devm. devm will automatically disable them
when the driver releases the device. Order variables in reverse-xmas
while we are here.
[kwilczynski: update style to match rest of the code]
Link: https://lore.kernel.org/linux-pci/20231105092908.3792-3-wsa+renesas@sang-engineering.com
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform
bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h.
As a result, there's a pretty much random mix of those include files
used throughout the tree. In order to detangle these headers and replace
the implicit includes with struct declarations, users need to explicitly
include the correct includes.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20231207165251.2855783-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Add support for setting of two-bit field that allows selection of 4x lane
PCIe which was previously limited to only 2x lanes.
Link: https://lore.kernel.org/linux-pci/20231128054402.2155183-5-s-vadapalli@ti.com
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Achal Verma <a-verma1@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Various platforms have different maximum amount of lanes that can be
selected. Add max_lanes to struct j721e_pcie to allow for detection of this
which is needed to calculate the needed bitmask size for the possible lane
count.
Link: https://lore.kernel.org/linux-pci/20231128054402.2155183-4-s-vadapalli@ti.com
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Achal Verma <a-verma1@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Add suspend/resume support for Layerscape LS1043a.
In the suspend path, PME_Turn_Off message is sent to the endpoint to
transition the link to L2/L3_Ready state. In this SoC, there is no way to
check if the controller has received the PME_To_Ack from the endpoint or
not. So to be on the safer side, the driver just waits for
PCIE_PME_TO_L2_TIMEOUT_US before asserting the SoC specific PMXMTTURNOFF
bit to complete the PME_Turn_Off handshake. Then the link would enter L2/L3
state depending on the VAUX supply.
In the resume path, the link is brought back from L2 to L0 by doing a
software reset.
Link: https://lore.kernel.org/r/20231204160829.2498703-5-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Roy Zang <Roy.Zang@nxp.com>
'pf' and 'lut' are two different acronyms describing the same
thing, basically it is a MMIO base address plus an offset.
Rename them to avoid duplicate pf_* and lut_* naming schemes in the
driver.
Link: https://lore.kernel.org/r/20231204160829.2498703-4-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Roy Zang <Roy.Zang@nxp.com>
Add suspend/resume support for Layerscape LS1021a.
In the suspend path, PME_Turn_Off message is sent to the endpoint to
transition the link to L2/L3_Ready state. In this SoC, there is no way to
check if the controller has received the PME_To_Ack from the endpoint or
not. So to be on the safer side, the driver just waits for
PCIE_PME_TO_L2_TIMEOUT_US before asserting the SoC specific PMXMTTURNOFF
bit to complete the PME_Turn_Off handshake. Then the link would enter L2/L3
state depending on the VAUX supply.
In the resume path, the link is brought back from L2 to L0 by doing a
software reset.
Link: https://lore.kernel.org/r/20231204160829.2498703-3-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Roy Zang <Roy.Zang@nxp.com>
Since different SoCs require different sequences for exiting L2, let's add
a separate "exit_from_l2()" callback to handle SoC specific sequences.
Change ls_pcie_exit_from_l2() return value from void to int in order
to propagate errors. Return an error if the exit_from_l2() callback
fails in the resume flow.
Link: https://lore.kernel.org/r/20231204160829.2498703-2-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Roy Zang <Roy.Zang@nxp.com>
Break up the newly added ASPM comment so that it fits within the soft 80
character limit and becomes more readable.
Link: https://lore.kernel.org/r/20231128081512.19387-5-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The qcom_pcie_enable_aspm() helper is called from pci_walk_bus() during
host init to enable ASPM.
Since pci_walk_bus() already holds a pci_bus_sem read lock, use
pci_enable_link_state_locked() to enable link states in order to avoid a
potential deadlock (e.g. in case someone takes a write lock before
reacquiring the read lock).
This issue was reported by lockdep:
============================================
WARNING: possible recursive locking detected
6.7.0-rc1 #4 Not tainted
--------------------------------------------
kworker/u16:6/147 is trying to acquire lock:
ffffbf3ff9d2cfa0 (pci_bus_sem){++++}-{3:3}, at: pci_enable_link_state+0x74/0x1e8
but task is already holding lock:
ffffbf3ff9d2cfa0 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(pci_bus_sem);
lock(pci_bus_sem);
*** DEADLOCK ***
Fixes: 9f4f3dfad8 ("PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops")
Link: https://lore.kernel.org/r/20231128081512.19387-4-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
[bhelgaas: add "potential" in subject since the deadlock has only been
reported by lockdep, include helper name in commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The vmd_pm_enable_quirk() helper is called from pci_walk_bus() during
probe to enable ASPM for controllers with VMD_FEAT_BIOS_PM_QUIRK set.
Since pci_walk_bus() already holds a pci_bus_sem read lock, use
pci_enable_link_state_locked() to enable link states in order to avoid a
potential deadlock (e.g. in case someone takes a write lock before
reacquiring the read lock).
Fixes: f492edb40b ("PCI: vmd: Add quirk to configure PCIe ASPM and LTR")
Link: https://lore.kernel.org/r/20231128081512.19387-3-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
[bhelgaas: add "potential" in subject since the deadlock has only been
reported by lockdep, include helper name in commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: <stable@vger.kernel.org> # 6.3
Cc: Michael Bottini <michael.a.bottini@linux.intel.com>
Cc: David E. Box <david.e.box@linux.intel.com>
This is a partial revert of 8b3517f88f ("PCI: loongson: Prevent LS7A MRRS
increases") for MIPS-based Loongson.
Some MIPS Loongson systems don't support arbitrary Max_Read_Request_Size
(MRRS) settings. 8b3517f88f ("PCI: loongson: Prevent LS7A MRRS
increases") worked around that by (1) assuming that firmware configured
MRRS to the maximum supported value and (2) preventing the PCI core from
increasing MRRS.
Unfortunately, some firmware doesn't set that maximum MRRS correctly, which
results in devices not being initialized correctly. One symptom, from the
Debian report below, is this:
ata4.00: exception Emask 0x0 SAct 0x20000000 SErr 0x0 action 0x6 frozen
ata4.00: failed command: WRITE FPDMA QUEUED
ata4.00: cmd 61/20:e8:00:f0:e1/00:00:00:00:00/40 tag 29 ncq dma 16384 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata4.00: status: { DRDY }
ata4: hard resetting link
Limit MRRS to 256 because MIPS Loongson with higher MRRS support is
considered rare.
This must be done at device enablement stage because the MRRS setting may
get lost if PCI_COMMAND_MASTER on the parent bridge is cleared, and we are
only sure parent bridge is enabled at this point.
Fixes: 8b3517f88f ("PCI: loongson: Prevent LS7A MRRS increases")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217680
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1035587
Link: https://lore.kernel.org/r/20231201115028.84351-1-jiaxun.yang@flygoat.com
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Cc: stable@vger.kernel.org
This field is set to APIC_DELIVERY_MODE_FIXED in all cases, and is read
exactly once. Fold the constant in uv_program_mmr() and drop the field.
Searching for the origin of the stale HyperV comment reveals commit
a31e58e129 ("x86/apic: Switch all APICs to Fixed delivery mode") which
notes:
As a consequence of this change, the apic::irq_delivery_mode field is
now pointless, but this needs to be cleaned up in a separate patch.
6 years is long enough for this technical debt to have survived.
[ bp: Fold in
https://lore.kernel.org/r/20231121123034.1442059-1-andrew.cooper3@citrix.com
]
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lore.kernel.org/r/20231102-x86-apic-v1-1-bf049a2a0ed6@citrix.com
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
pci_host_common_remove() returned zero unconditionally. With that converted
to return void instead, the generic pci host driver can be switched to
.remove_new() trivially.
Link: https://lore.kernel.org/r/20231020092107.2148311-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Will Deacon <will@kernel.org>
-----BEGIN PGP SIGNATURE-----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=G//C
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Use acpi_evaluate_dsm_typed() instead of open-coding _DSM
evaluation to learn device characteristics (Andy Shevchenko)
- Tidy multi-function header checks using new PCI_HEADER_TYPE_MASK
definition (Ilpo Järvinen)
- Simplify config access error checking in various drivers (Ilpo
Järvinen)
- Use pcie_capability_clear_word() (not
pcie_capability_clear_and_set_word()) when only clearing (Ilpo
Järvinen)
- Add pci_get_base_class() to simplify finding devices using base
class only (ignoring subclass and programming interface) (Sui
Jingfeng)
- Add pci_is_vga(), which includes ancient PCI_CLASS_NOT_DEFINED_VGA
devices from before the Class Code was added to PCI (Sui Jingfeng)
- Use pci_is_vga() for vgaarb, sysfs "boot_vga", virtio, qxl to
include ancient VGA devices (Sui Jingfeng)
Resource management:
- Make pci_assign_unassigned_resources() non-init because sparc uses
it after init (Randy Dunlap)
Driver binding:
- Retain .remove() and .probe() callbacks (previously __init) because
sysfs may cause them to be called later (Uwe Kleine-König)
- Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device, so
it can be claimed by dwc3 instead (Vicki Pfau)
PCI device hotplug:
- Add Ampere Altra Attention Indicator extension driver for acpiphp
(D Scott Phillips)
Power management:
- Quirk VideoPropulsion Torrent QN16e with longer delay after reset
(Lukas Wunner)
- Prevent users from overriding drivers that say we shouldn't use
D3cold (Lukas Wunner)
- Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4
because wakeup interrupts from those states don't work if amd-pmc
has put the platform in a hardware sleep state (Mario Limonciello)
IOMMU:
- Disable ATS for Intel IPU E2000 devices with invalidation message
endianness erratum (Bartosz Pawlowski)
Error handling:
- Factor out interrupt enable/disable into helpers (Kai-Heng Feng)
Peer-to-peer DMA:
- Fix flexible-array usage in struct pci_p2pdma_pagemap in case we
ever use pagemaps with multiple entries (Gustavo A. R. Silva)
ASPM:
- Revert a change that broke when drivers disabled L1 and users later
enabled an L1.x substate via sysfs, and fix a similar issue when
users disabled L1 via sysfs (Heiner Kallweit)
Endpoint framework:
- Fix double free in __pci_epc_create() (Dan Carpenter)
- Use IS_ERR_OR_NULL() to simplify endpoint core (Ruan Jinjie)
Cadence PCIe controller driver:
- Drop unused "is_rc" member (Li Chen)
Freescale Layerscape PCIe controller driver:
- Enable 64-bit addressing in endpoint mode (Guanhua Gao)
Intel VMD host bridge driver:
- Fix multi-function header check (Ilpo Järvinen)
Microsoft Hyper-V host bridge driver:
- Annotate struct hv_dr_state with __counted_by (Kees Cook)
NVIDIA Tegra194 PCIe controller driver:
- Drop setting of LNKCAP_MLW (max link width) since dw_pcie_setup()
already does this via dw_pcie_link_set_max_link_width() (Yoshihiro
Shimoda)
Qualcomm PCIe controller driver:
- Use PCIE_SPEED2MBS_ENC() to simplify encoding of link speed
(Manivannan Sadhasivam)
- Add a .write_dbi2() callback so DBI2 register writes, e.g., for
setting the BAR size, work correctly (Manivannan Sadhasivam)
- Enable ASPM for platforms that use 1.9.0 ops, because the PCI core
doesn't enable ASPM states that haven't been enabled by the
firmware (Manivannan Sadhasivam)
Renesas R-Car Gen4 PCIe controller driver:
- Add DesignWare core support (set max link width, EDMA_UNROLL flag,
.pre_init(), .deinit(), etc) for use by R-Car Gen4 driver
(Yoshihiro Shimoda)
- Add driver and DT schema for DesignWare-based Renesas R-Car Gen4
controller in both host and endpoint mode (Yoshihiro Shimoda)
Xilinx NWL PCIe controller driver:
- Update ECAM size to support 256 buses (Thippeswamy Havalige)
- Stop setting bridge primary/secondary/subordinate bus numbers,
since PCI core does this (Thippeswamy Havalige)
Xilinx XDMA controller driver:
- Add driver and DT schema for Zynq UltraScale+ MPSoCs devices with
Xilinx XDMA Soft IP (Thippeswamy Havalige)
Miscellaneous:
- Use FIELD_GET()/FIELD_PREP() to simplify and reduce use of _SHIFT
macros (Ilpo Järvinen, Bjorn Helgaas)
- Remove logic_outb(), _outw(), outl() duplicate declarations (John
Sanpe)
- Replace unnecessary UTF-8 in Kconfig help text because menuconfig
doesn't render it correctly (Liu Song)"
* tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (102 commits)
PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers
PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word()
PCI: endpoint: Fix double free in __pci_epc_create()
PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver
dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge
PCI: xilinx-cpm: Move IRQ definitions to a common header
PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses
PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro
dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example
PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields
PCI: hotplug: Add Ampere Altra Attention Indicator extension driver
PCI/AER: Factor out interrupt toggling into helpers
PCI: acpiphp: Allow built-in drivers for Attention Indicators
PCI/portdrv: Use FIELD_GET()
PCI/VC: Use FIELD_GET()
PCI/PTM: Use FIELD_GET()
PCI/PME: Use FIELD_GET()
PCI/ATS: Use FIELD_GET()
PCI/ATS: Show PASID Capability register width in bitmasks
PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()
...
- Use FIELD_GET()/FIELD_PREP() when possible throughout drivers/pci/ (Ilpo
Järvinen, Bjorn Helgaas)
- Rework DPC control programming for clarity (Ilpo Järvinen)
* pci/field-get:
PCI/portdrv: Use FIELD_GET()
PCI/VC: Use FIELD_GET()
PCI/PTM: Use FIELD_GET()
PCI/PME: Use FIELD_GET()
PCI/ATS: Use FIELD_GET()
PCI/ATS: Show PASID Capability register width in bitmasks
PCI: Use FIELD_GET() in Sapphire RX 5600 XT Pulse quirk
PCI: Use FIELD_GET()
PCI/MSI: Use FIELD_GET/PREP()
PCI/DPC: Use defines with DPC reason fields
PCI/DPC: Use defined fields with DPC_CTL register
PCI/DPC: Use FIELD_GET()
PCI: hotplug: Use FIELD_GET/PREP()
PCI: dwc: Use FIELD_GET/PREP()
PCI: cadence: Use FIELD_GET()
PCI: Use FIELD_GET() to extract Link Width
PCI: mvebu: Use FIELD_PREP() with Link Width
PCI: tegra194: Use FIELD_GET()/FIELD_PREP() with Link Width fields
# Conflicts:
# drivers/pci/controller/dwc/pcie-tegra194.c
- Simplify config accessor error checking (Ilpo Järvinen)
* pci/config-errs:
scsi: ipr: Do PCI error checks on own line
PCI: xgene: Do PCI error check on own line & keep return value
PCI: Do error check on own line to split long "if" conditions
atm: iphase: Do PCI error checks on own line
sh: pci: Do PCI error check on own line
alpha: Streamline convoluted PCI error handling
- Move Xilinx IRQ definitions to a common header shared by pcie-xilinx-cpm
and xilinx-xdma (Thippeswamy Havalige)
- Add Xilinx XDMA driver and DT schema (Thippeswamy Havalige)
* pci/controller/xilinx-xdma:
PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver
dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge
PCI: xilinx-cpm: Move IRQ definitions to a common header
- Drop xilinx-nwl updates of bridge bus number fields, since PCI core
already does that (Thippeswamy Havalige)
- Update xilinx-nwl driver and ECAM size in devicetree example to allow up
to 256 buses (Thippeswamy Havalige)
* pci/controller/xilinx-ecam:
PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses
PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro
dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example
PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields
- Use PCIE_SPEED2MBS_ENC() macro in qcom host and endpoint to encode link
speed instead of hard-coding the link speed in MBps (Manivannan
Sadhasivam)
- Use Mbps_to_icc() (not MBps_to_icc()) in tegra194 instead of explicitly
doing the bytes-to-bits conversion (Manivannan Sadhasivam)
* pci/controller/speed:
PCI: tegra194: Use Mbps_to_icc() macro for setting icc speed
PCI: qcom-ep: Use PCIE_SPEED2MBS_ENC() macro for encoding link speed
PCI: qcom: Use PCIE_SPEED2MBS_ENC() macro for encoding link speed
- Add generic T_PVPERL macro for the required interval between power being
stable and PERST# being inactive (Yoshihiro Shimoda)
- Factor out dw_pcie_link_set_max_link_width() (Yoshihiro Shimoda)
- Update PCI_EXP_LNKCAP_MLW so Link Capabilities shows the correct max link
width (Yoshihiro Shimoda)
- Drop tegra194 PCI_EXP_LNKCAP_MLW setting since dw_pcie_setup() already
does it (Yoshihiro Shimoda)
- Add dwc support for different dbi and dbi2 register offsets, to be used
for R-Car Gen4 controllers (Yoshihiro Shimoda)
- Add EDMA_UNROLL capability flag for R-Car Gen4 controllers that don't
correctly advertise unrolled mapping via their eDMA CTRL register
(Yoshihiro Shimoda)
- Export dw_pcie_ep_exit() for use by the modular R-Car Gen4 driver
(Yoshihiro Shimoda)
- Add .pre_init() and .deinit() hooks for use by R-Car Gen4 controllers
(Yoshihiro Shimoda)
- Increase snps,dw-pcie DT reg and reg-names maxItems for R-Car Gen4
controllers (Yoshihiro Shimoda)
- Add rcar-gen4-pci host and endpoint DT bindings and drivers (Yoshihiro
Shimoda)
- Add Renesas R8A779F0 Device ID to pci_endpoint_test to allow testing on
R-Car S4-8 (Yoshihiro Shimoda)
* pci/controller/rcar:
misc: pci_endpoint_test: Add Device ID for R-Car S4-8 PCIe controller
MAINTAINERS: Update PCI DRIVER FOR RENESAS R-CAR for R-Car Gen4
PCI: rcar-gen4: Add endpoint mode support
PCI: rcar-gen4: Add R-Car Gen4 PCIe controller support for host mode
dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Endpoint
dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Host
dt-bindings: PCI: dwc: Update maxItems of reg and reg-names
PCI: dwc: endpoint: Introduce .pre_init() and .deinit()
PCI: dwc: Expose dw_pcie_write_dbi2() to module
PCI: dwc: Expose dw_pcie_ep_exit() to module
PCI: dwc: Add EDMA_UNROLL capability flag
PCI: dwc: endpoint: Add multiple PFs support for dbi2
PCI: tegra194: Drop PCI_EXP_LNKSTA_NLW setting
PCI: dwc: Add missing PCI_EXP_LNKCAP_MLW handling
PCI: dwc: Add dw_pcie_link_set_max_link_width()
PCI: Add T_PVPERL macro
The DWC core driver exposes the write_dbi2() callback for writing to the
DBI2 registers in a vendor-specific way.
On the Qcom EP platforms, the DBI_CS2 bit in the ELBI region needs to be
asserted before writing to any DBI2 registers and deasserted once done.
So, let's implement the callback for the Qcom PCIe EP driver so that the
DBI2 writes are correctly handled in the hardware.
Without this callback, the DBI2 register writes like BAR size won't go
through and as a result, the default BAR size is set for all BARs.
[kwilczynski: commit log, renamed function to match the DWC convention]
Fixes: f55fee56a6 ("PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver")
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/linux-pci/20231025130029.74693-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Cc: stable@vger.kernel.org # 5.16+
Add support for Xilinx XDMA Soft IP core as Root Port.
The Zynq UltraScale+ MPSoCs devices support XDMA soft IP module in
programmable logic.
The integrated XDMA Soft IP block has integrated bridge function that
can act as PCIe Root Port.
[kwilczynski: correct indentation and whitespaces, Kconfig help update]
Link: https://lore.kernel.org/linux-pci/20231003173453.938190-4-thippeswamy.havalige@amd.com
Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@amd.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Move the interrupt bit definitions to the pcie-xilinx-common.h file,
which then can be shared between pcie-xilinx-cpm and the new xilinx-xdma
drivers.
While at it, also rename them so these definitions are not CPM-specific.
No functional change intended.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20231003173453.938190-2-thippeswamy.havalige@amd.com
Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@amd.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The PCIe Root Port controller expects ECAM size to be set through software.
As such, update the value of the NWL_ECAM_VALUE_DEFAULT macro to 16 to
allow the controller to address the 256 MB ECAM region and, as such,
enable support for detecting up to 256 buses.
[kwilczynski: commit log]
Link: https://patchwork.kernel.org/project/linux-pci/patch/20231016051102.1180432-5-thippeswamy.havalige@amd.com/
Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Rename the NWL_ECAM_VALUE_DEFAULT macro to NWL_ECAM_MAX_SIZE and drop
the no longer needed ecam_value variable from struct nwl_pcie.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20231016051102.1180432-4-thippeswamy.havalige@amd.com
Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The PCI core already updates the primary, secondary and subordinate bus
number registers fields of the Type 1 header.
Thus, remove the redundant code from the nwl_pcie_bridge_init().
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20231016051102.1180432-2-thippeswamy.havalige@amd.com
Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Convert open-coded variants of PCI field access into FIELD_GET/PREP()
to make the code easier to understand.
Add two missing defines into pci_regs.h. Logically, the Max No-Snoop
Latency Register is a separate word sized register in the PCIe spec,
but the pre-existing LTR defines in pci_regs.h with dword long values
seem to consider the registers together (the same goes for the only
user). Thus, follow the custom and make the new values also take both
word long LTR registers as a joint dword register.
Link: https://lore.kernel.org/r/20231024110336.26264-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add R-Car Gen4 PCIe controller support for host mode.
This controller is based on Synopsys DesignWare PCIe. However, this
particular controller has a number of vendor-specific registers, and as
such, requires initialization code like mode setting and retraining and
so on.
Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-13-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Renesas R-Car Gen4 PCIe controllers require vendor-specific
initialization before .init().
To use dw->dbi and dw->num-lanes in the initialization code,
introduce .pre_init() into struct dw_pcie_ep_ops. While at it,
also introduce .deinit() to disable the controller by using
vendor-specific de-initialization.
Note that the ep_init in the struct dw_pcie_ep_ops should be
renamed to init later.
Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-9-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Since no PCIe controller drivers call this, this change is not required
for now. But, Renesas R-Car Gen4 PCIe controller driver will call this
and if the controller driver is built as a kernel module, the following
build error happens:
ERROR: modpost: "dw_pcie_write_dbi2" [drivers/pci/controller/dwc/pcie-rcar-gen4-host-drv.ko] undefined!
So, expose dw_pcie_write_dbi2() for it.
Link: https://lore.kernel.org/linux-pci/20230926122431.3974714-8-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Since no PCIe controller drivers call this, this change is not required
for now. But, Renesas R-Car Gen4 PCIe controller driver will call this
and if the controller driver is built as a kernel module, the following
build error happens:
ERROR: modpost: "dw_pcie_ep_exit" [drivers/pci/controller/dwc/pcie-rcar-gen4-ep-drv.ko] undefined!
So, expose dw_pcie_ep_exit() for it.
Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-8-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Renesas R-Car Gen4 PCIe controllers have an unexpected register value in
the eDMA CTRL register.
So, add a new capability flag "EDMA_UNROLL" which would force the unrolled
eDMA mapping for the problematic device.
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-7-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
The commit 24ede430fa ("PCI: designware-ep: Add multiple PFs support
for DWC") added .func_conf_select() to get the configuration space of
different PFs and assumed that the offsets between dbi and dbi2 would
be the same.
However, Renesas R-Car Gen4 PCIe controllers have different offsets of
function 1: dbi (+0x1000) and dbi2 (+0x800). To get the offset for dbi2,
add .get_dbi2_offset() and dw_pcie_ep_get_dbi2_offset().
Note:
- .func_conf_select() should be renamed later.
- dw_pcie_ep_get_dbi2_offset() will call .func_conf_select()
if .get_dbi2_offset() doesn't exist for backward compatibility.
- dw_pcie_writeX_{dbi/dbi2} APIs accepted the func_no argument,
so that these offset calculations are contained in the API
definitions itself as it should.
Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-6-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
dw_pcie_setup() is already setting PCI_EXP_LNKCAP_MLW to pcie->num_lanes
in the PCI_EXP_LNKCAP register for programming maximum link width.
Hence, remove the redundant setting here.
Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-5-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Update dw_pcie_link_set_max_link_width() to set PCI_EXP_LNKCAP_MLW.
In accordance with the DW PCIe RC/EP HW manuals [1,2,3,...] aside with
the PORT_LINK_CTRL_OFF.LINK_CAPABLE and GEN2_CTRL_OFF.NUM_OF_LANES[8:0]
field there is another one which needs to be updated.
It's LINK_CAPABILITIES_REG.PCIE_CAP_MAX_LINK_WIDTH. If it isn't done at
the very least the maximum link-width capability CSR won't expose the
actual maximum capability.
[1] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
Version 4.60a, March 2015, p.1032
[2] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
Version 4.70a, March 2016, p.1065
[3] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
Version 4.90a, March 2016, p.1057
...
[X] DesignWare Cores PCI Express Controller Databook - DWC PCIe Endpoint,
Version 5.40a, March 2019, p.1396
[X+1] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
Version 5.40a, March 2019, p.1266
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-4-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
This is a preparation before adding the Max-Link-width capability
setup which would in its turn complete the max-link-width setup
procedure defined by Synopsys in the HW-manual.
Seeing there is a max-link-speed setup method defined in the DW PCIe
core driver it would be good to have a similar function for the link
width setup.
That's why we need to define a dedicated function first from already
implemented but incomplete link-width setting up code.
Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-3-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct hv_dr_state.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Link: https://lore.kernel.org/linux-pci/20230922175257.work.900-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Acked-by: Wei Liu <wei.liu@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Krzysztof Wilczyński <kw@linux.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: linux-hyperv@vger.kernel.org
Cc: linux-pci@vger.kernel.org
ASPM is supported by Qcom host controllers/bridges on most of the recent
platforms and so the devices tested so far. But for enabling ASPM by
default (without using Kconfig, kernel command-line or sysfs), BIOS has
to enable ASPM on both host bridge and downstream devices during boot.
Unfortunately, none of the BIOS available on Qcom platforms enables
ASPM. Due to this, the platforms making use of Qcom SoCs draw high power
during runtime.
To fix this power draw issue, users have to enable ASPM using Kconfig,
kernel command-line, sysfs or the BIOS has to start enabling ASPM.
The latter may happen in the future, but that won't address the issue on
current platforms. Also, asking users to enable a feature to get the power
management right would provide an unpleasant out-of-the-box experience.
So the apt solution is to enable ASPM in the controller driver itself. And
this is being accomplished by calling pci_enable_link_state() in the newly
introduced host_post_init() callback for all the devices connected to the
bus. This function enables all supported link low power states for both
host bridge and the downstream devices.
Due to limited testing, ASPM is only enabled for platforms making use of
ops_1_9_0 callbacks.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20231010155914.9516-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
This callback can be used by the platform drivers to do configuration
once all the devices are scanned. Like changing LNKCTL of all downstream
devices to enable ASPM etc...
Link: https://lore.kernel.org/linux-pci/20231010155914.9516-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
PCIe speed returned by the PCIE_SPEED2MBS_ENC() macro is in Mbps. So
instead of converting it to MBps explicitly and using the MBps_to_icc()
macro, let's use the Mbps_to_icc() macro to pass the value directly.
Link: https://lore.kernel.org/linux-pci/20231004164430.39662-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Vidya Sagar <vidyas@nvidia.com>
Instead of hardcoding the link speed in MBps, use existing
PCIE_SPEED2MBS_ENC() macro that does the encoding of the link speed for
us. Also, let's Wrap it with QCOM_PCIE_LINK_SPEED_TO_BW() macro to do
the conversion to ICC speed.
This eliminates the need for a switch case in qcom_pcie_icc_update() and
also works for future Gen speeds without any code modifications.
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/linux-pci/20231004164430.39662-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Instead of hardcoding the link speed in MBps, use existing
PCIE_SPEED2MBS_ENC() macro that does the encoding of the link speed for
us. Also, let's Wrap it with QCOM_PCIE_LINK_SPEED_TO_BW() macro to do
the conversion to ICC speed.
This eliminates the need for a switch case in qcom_pcie_icc_update() and
also works for future Gen speeds without any code modifications.
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/linux-pci/20231004164430.39662-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Instead of an "if" condition with a line split, use the usual error
handling pattern with a separate variable to improve readability.
pci_generic_config_read32() already returns either PCIBIOS_SUCCESSFUL or
PCIBIOS_DEVICE_NOT_FOUND so it is enough to simply return its return value
when ret != PCIBIOS_SUCCESSFUL.
No functional changes intended.
Link: https://lore.kernel.org/r/20230911125354.25501-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
mvebu_pcie_setup_hw() setups the Maximum Link Width field in the Link
Capabilities registers using an open-coded variant of FIELD_PREP() with
a literal in shift. Improve readability by using
FIELD_PREP(PCI_EXP_LNKCAP_MLW, ...).
Link: https://lore.kernel.org/r/20230919125648.1920-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use FIELD_GET() to extract PCIe Negotiated Link Width field instead of
custom masking and shifting.
Similarly, change custom code that misleadingly used
PCI_EXP_LNKSTA_NLW_SHIFT to prepare value for PCI_EXP_LNKCAP write
to use FIELD_PREP() with correct field define (PCI_EXP_LNKCAP_MLW).
Link: https://lore.kernel.org/r/20230919125648.1920-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The __init annotation makes the ks_pcie_probe() function disappear after
booting completes. However a device can also be bound later. In that case,
we try to call ks_pcie_probe(), but the backing memory is likely already
overwritten.
The right thing to do is do always have the probe callback available. Note
that the (wrong) __refdata annotation prevented this issue to be noticed by
modpost.
Fixes: 0c4ffcfe1f ("PCI: keystone: Add TI Keystone PCIe driver")
Link: https://lore.kernel.org/r/20231001170254.2506508-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
With CONFIG_PCIE_KEYSTONE=y and ks_pcie_remove() marked with __exit, the
function is discarded from the driver. In this case a bound device can
still get unbound, e.g via sysfs. Then no cleanup code is run resulting in
resource leaks or worse.
The right thing to do is do always have the remove callback available.
Note that this driver cannot be compiled as a module, so ks_pcie_remove()
was always discarded before this change and modpost couldn't warn about
this issue. Furthermore the __ref annotation also prevents a warning.
Fixes: 0c4ffcfe1f ("PCI: keystone: Add TI Keystone PCIe driver")
Link: https://lore.kernel.org/r/20231001170254.2506508-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
With CONFIG_PCIE_KIRIN=y and kirin_pcie_remove() marked with __exit, the
function is discarded from the driver. In this case a bound device can
still get unbound, e.g via sysfs. Then no cleanup code is run resulting in
resource leaks or worse.
The right thing to do is do always have the remove callback available.
This fixes the following warning by modpost:
drivers/pci/controller/dwc/pcie-kirin: section mismatch in reference: kirin_pcie_driver+0x8 (section: .data) -> kirin_pcie_remove (section: .exit.text)
(with ARCH=x86_64 W=1 allmodconfig).
Fixes: 000f60db78 ("PCI: kirin: Add support for a PHY layer")
Link: https://lore.kernel.org/r/20231001170254.2506508-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
With CONFIG_PCI_EXYNOS=y and exynos_pcie_remove() marked with __exit, the
function is discarded from the driver. In this case a bound device can
still get unbound, e.g via sysfs. Then no cleanup code is run resulting in
resource leaks or worse.
The right thing to do is do always have the remove callback available.
This fixes the following warning by modpost:
WARNING: modpost: drivers/pci/controller/dwc/pci-exynos: section mismatch in reference: exynos_pcie_driver+0x8 (section: .data) -> exynos_pcie_remove (section: .exit.text)
(with ARCH=x86_64 W=1 allmodconfig).
Fixes: 340cba6092 ("pci: Add PCIe driver for Samsung Exynos")
Link: https://lore.kernel.org/r/20231001170254.2506508-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Cc: stable@vger.kernel.org
The struct cdns_plat_pcie contains a member called is_rc that is not
being used beyond being assigned a value within the cdns_plat_pcie_probe()
function, which is then not used for anything.
Thus, drop is_rc from the struct cdns_plat_pcie, especially since there
already is an is_rc member within the struct cdns_plat_pcie_of_data that
is actively used to convey information about the PCIe controller mode.
[kwilczynski: commit log]
Signed-off-by: Li Chen <lchen@ambarella.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Replace literals under drivers/pci/ with PCI_HEADER_TYPE_MASK,
PCI_HEADER_TYPE_NORMAL, and PCI_HEADER_TYPE_MFD.
Also replace !! boolean conversions with FIELD_GET().
Link: https://lore.kernel.org/r/20231003125300.5541-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # for Renesas R-Car
vmd_domain_reset() attempts to find whether the device may contain multiple
functions by checking 0x80 (Multi-Function Device), however, the hdr_type
variable has already been masked with PCI_HEADER_TYPE_MASK so the check can
never true.
To fix the issue, don't mask the read with PCI_HEADER_TYPE_MASK.
Fixes: 6aab562229 ("PCI: vmd: Clean up domain before enumeration")
Link: https://lore.kernel.org/r/20231003125300.5541-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Nirmal Patel <nirmal.patel@linux.intel.com>
PARF_SLV_ADDR_SPACE_SIZE_2_3_3 is used by qcom_pcie_post_init_2_3_3().
This PCIe slave address space size register offset is 0x358 but was
incorrectly changed to 0x16c by 39171b33f6 ("PCI: qcom: Remove PCIE20_
prefix from register definitions").
This prevented access to slave address space registers like iATU, etc.,
so the IPQ8074 PCIe controller was not enumerated.
Revert back to the correct 0x358 offset and remove the unused
PARF_SLV_ADDR_SPACE_SIZE_2_3_3.
Fixes: 39171b33f6 ("PCI: qcom: Remove PCIE20_ prefix from register definitions")
Link: https://lore.kernel.org/r/20230919102948.1844909-1-quic_srichara@quicinc.com
Tested-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: stable@vger.kernel.org # v6.4+
The if-statement within the vmd_resume() function has an inconsistent
indentation that leads to a compile time warning.
Thus, correct the inconsistent indentation. While at it, remove the
if-statement completely, which will make the code simpler.
This was detected by Smatch:
drivers/pci/controller/vmd.c:1066 vmd_resume() warn: inconsistent indenting
No functional changes are intended.
[kwilczynski: use correct tags, commit log]
Suggested-by: Christoph Hellwig <hch@infradead.org>
Link: https://lore.kernel.org/linux-pci/20230627113808.269716-1-korantwork@gmail.com
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Xinghui Li <korantli@tencent.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
-----BEGIN PGP SIGNATURE-----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=iFFM
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Add locking to read/modify/write PCIe Capability Register accessors
for Link Control and Root Control
- Use pci_dev_id() when possible instead of manually composing ID
from dev->bus->number and dev->devfn
Resource management:
- Move prototypes for __weak sysfs resource files to linux/pci.h to
fix 'no previous prototype' warnings
- Make more I/O port accesses depend on HAS_IOPORT
- Use devm_platform_get_and_ioremap_resource() instead of open-coding
platform_get_resource() followed by devm_ioremap_resource()
Power management:
- Ensure devices are powered up while accessing VPD
- If device is powered-up, keep it that way while polling for PME
- Only read PCI_PM_CTRL register when available, to avoid reading the
wrong register and corrupting dev->current_state
Virtualization:
- Avoid Secondary Bus Reset on NVIDIA T4 GPUs
Error handling:
- Remove unused pci_disable_pcie_error_reporting()
- Unexport pci_enable_pcie_error_reporting(), used only by aer.c
- Unexport pcie_port_bus_type, used only by PCI core
VGA:
- Simplify and clean up typos in VGA arbiter
Apple PCIe controller driver:
- Initialize pcie->nvecs (number of available MSIs) before use
Broadcom iProc PCIe controller driver:
- Use of_property_read_bool() instead of low-level accessors for
boolean properties
Broadcom STB PCIe controller driver:
- Assert PERST# when probing BCM2711 because some bootloaders don't
do it
Freescale i.MX6 PCIe controller driver:
- Add .host_deinit() callback so we can clean up things like
regulators on probe failure or driver unload
Freescale Layerscape PCIe controller driver:
- Add support for link-down notification so the endpoint driver can
process LINK_DOWN events
- Add suspend/resume support, including manual
PME_Turn_off/PME_TO_Ack handshake
- Save Link Capabilities during probe so they can be restored when
handling a link-up event, since the controller loses the Link Width
and Link Speed values during reset
Intel VMD host bridge driver:
- Fix disable of bridge windows during domain reset; previously we
cleared the base/limit registers, which actually left the windows
enabled
Marvell MVEBU PCIe controller driver:
- Remove unused busn member
Microchip PolarFlare PCIe controller driver:
- Fix interrupt bit definitions so the SEC and DED interrupt handlers
work correctly
- Make driver buildable as a module
- Read FPGA MSI configuration parameters from hardware instead of
hard-coding them
Microsoft Hyper-V host bridge driver:
- To avoid a NULL pointer dereference, skip MSI restore after
hibernate if MSI/MSI-X hasn't been enabled
NVIDIA Tegra194 PCIe controller driver:
- Revert 'PCI: tegra194: Enable support for 256 Byte payload' because
Linux doesn't know how to reduce MPS from to 256 to 128 bytes for
endpoints below a switch (because other devices below the switch
might already be operating), which leads to 'Malformed TLP' errors
Qualcomm PCIe controller driver:
- Add DT and driver support for interconnect bandwidth voting for
'pcie-mem' and 'cpu-pcie' interconnects
- Fix broken SDX65 'compatible' DT property
- Configure controller so MHI bus master clock will be switched off
while in ASPM L1.x states
- Use alignment restriction from EPF core in EPF MHI driver
- Add Endpoint eDMA support
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driversupport
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driversupport
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driversupport
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driver
- Use iATU for EPF MHI transfers smaller than 4K to avoid eDMA setup
latency
- Add sa8775p DT binding and driver support
Rockchip PCIe controller driver:
- Use 64-bit mask on MSI 64-bit PCI address to avoid zeroing out the
upper 32 bits
SiFive FU740 PCIe controller driver:
- Set the supported number of MSI vectors so we can use all available
MSI interrupts
Synopsys DesignWare PCIe controller driver:
- Add generic dwc suspend/resume APIs (dw_pcie_suspend_noirq() and
dw_pcie_resume_noirq()) to be called by controller driver
suspend/resume ops, and a controller callback to send PME_Turn_Off
MicroSemi Switchtec management driver:
- Add support for PCIe Gen5 devices
Miscellaneous:
- Reorder and compress to reduce size of struct pci_dev
- Fix race in DOE destroy_work_on_stack()
- Add stubs to avoid casts between incompatible function types
- Explicitly include correct DT includes to untangle headers"
* tag 'pci-v6.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (96 commits)
PCI: qcom-ep: Add ICC bandwidth voting support
dt-bindings: PCI: qcom: ep: Add interconnects path
PCI: qcom-ep: Treat unknown IRQ events as an error
dt-bindings: PCI: qcom: Fix SDX65 compatible
PCI: endpoint: Add kernel-doc for pci_epc_mem_init() API
PCI: epf-mhi: Use iATU for small transfers
PCI: epf-mhi: Add support for SM8450
PCI: epf-mhi: Add eDMA support
PCI: qcom-ep: Add eDMA support
PCI: epf-mhi: Make use of the alignment restriction from EPF core
PCI/PM: Only read PCI_PM_CTRL register when available
PCI: qcom: Add support for sa8775p SoC
dt-bindings: PCI: qcom: Add sa8775p compatible
PCI: qcom-ep: Pass alignment restriction to the EPF core
PCI: Simplify pcie_capability_clear_and_set_word() control flow
PCI: Tidy config space save/restore messages
PCI: Fix code formatting inconsistencies
PCI: Fix typos in docs and comments
PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos
PCI: Simplify pci_dev_driver()
...
- Reorder struct pci_dev to avoid holes and reduce size (Christophe
JAILLET)
- Change pdev->rom_attr_enabled to single bit since it's only a boolean
value (Christophe JAILLET)
- Use struct_size() in pirq_convert_irt_table() instead of hand-writing it
(Christophe JAILLET)
- Explicitly include correct DT includes to untangle headers (Rob Herring)
- Fix a DOE race between destroy_work_on_stack() and the stack-allocated
task->work struct going out of scope in pci_doe() (Ira Weiny)
- Use pci_dev_id() when possible instead of manually composing ID from
dev->bus->number and dev->devfn (Xiongfeng Wang, Zheng Zengkai)
- Move pci_create_resource_files() declarations to linux/pci.h for alpha
build warnings (Arnd Bergmann)
- Remove unused hotplug function declarations (Yue Haibing)
- Remove unused mvebu struct mvebu_pcie.busn (Pali Rohár)
- Unexport pcie_port_bus_type (Bjorn Helgaas)
- Remove unnecessary sysfs ID local variable initialization (Bjorn Helgaas)
- Fix BAR value printk formatting to accommodate 32-bit values (Bjorn
Helgaas)
- Use consistent pointer types for config access syscall get_user() and
put_user() uses (Bjorn Helgaas)
- Simplify AER_RECOVER_RING_SIZE definition (Bjorn Helgaas)
- Simplify pci_pio_to_address() (Bjorn Helgaas)
- Simplify pci_dev_driver() (Bjorn Helgaas)
- Fix pci_bus_resetable(), pci_slot_resetable() name typos (Bjorn Helgaas)
- Fix code and doc typos and code formatting (Bjorn Helgaas)
- Tidy config space save/restore messages (Bjorn Helgaas)
* pci/misc:
PCI: Tidy config space save/restore messages
PCI: Fix code formatting inconsistencies
PCI: Fix typos in docs and comments
PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos
PCI: Simplify pci_dev_driver()
PCI: Simplify pci_pio_to_address()
PCI/AER: Simplify AER_RECOVER_RING_SIZE definition
PCI: Use consistent put_user() pointer types
PCI: Fix printk field formatting
PCI: Remove unnecessary initializations
PCI: Unexport pcie_port_bus_type
PCI: mvebu: Remove unused busn member
PCI: Remove unused function declarations
PCI/sysfs: Move declarations to linux/pci.h
PCI/P2PDMA: Use pci_dev_id() to simplify the code
PCI/IOV: Use pci_dev_id() to simplify the code
PCI/AER: Use pci_dev_id() to simplify the code
PCI: apple: Use pci_dev_id() to simplify the code
PCI/DOE: Fix destroy_work_on_stack() race
PCI: Explicitly include correct DT includes
x86/PCI: Use struct_size() in pirq_convert_irt_table()
PCI: Change pdev->rom_attr_enabled to single bit
PCI: Reorder pci_dev fields to reduce holes
- Use Use devm_platform_get_and_ioremap_resource() instead of open-coding
platform_get_resource() followed by devm_ioremap_resource() (Yang Li)
* pci/controller/resources:
PCI: imx6: Use devm_platform_get_and_ioremap_resource()
PCI: xgene-msi: Use devm_platform_get_and_ioremap_resource()
PCI: v3: Use devm_platform_get_and_ioremap_resource()
PCI: rcar-gen2: Use devm_platform_get_and_ioremap_resource()
- Add stubs for devm action functions that call clk_disable_unprepare() to
avoid casts between incompatible function types (Krzysztof Wilczyński)
* pci/controller/remove-void-cast:
PCI: microchip: Remove cast between incompatible function type
PCI: keembay: Remove cast between incompatible function type
PCI: meson: Remove cast between incompatible function type
- Fix disable of bridge windows during domain reset; previously we cleared
the base/limit registers, which left the windows enabled (Nirmal Patel)
* pci/controller/vmd:
PCI: vmd: Disable bridge window for domain reset
- Revert "PCI: tegra194: Enable support for 256 Byte payload" because Linux
doesn't know how to reduce MPS from to 256 to 128 bytes for Endpoints
below a Switch (because other devices below the Switch might already be
operating), which leads to Malformed TLP errors (Vidya Sagar)
* pci/controller/tegra194:
Revert "PCI: tegra194: Enable support for 256 Byte payload"
- Use 64-bit mask on MSI 64-bit PCI address to avoid zeroing out the upper
32 bits (Rick Wertenbroek)
* pci/controller/rockchip:
PCI: rockchip: Use 64-bit mask on MSI 64-bit PCI address
- Pass the Qcom Endpoint 4K alignment requirement for outbound windows to
the EPF core so EPF drivers can use it (Manivannan Sadhasivam)
- Use alignment restriction from EPF core in Qcom EPF MHI driver
(Manivannan Sadhasivam)
- Add Qcom Endpoint eDMA support by enabling the eDMA IRQ (Manivannan
Sadhasivam)
- Add Qcom MHI eDMA support (Manivannan Sadhasivam)
- Add Qcom Snapdragon SM8450 support to the EPF MHI driver (Manivannan
Sadhasivam)
- Use iATU for EPF MHI transfers smaller than 4K to avoid eDMA setup
latency (Manivannan Sadhasivam)
- Add pci_epc_mem_init() kernel-doc (Manivannan Sadhasivam)
* pci/controller/qcom-edma:
PCI: endpoint: Add kernel-doc for pci_epc_mem_init() API
PCI: epf-mhi: Use iATU for small transfers
PCI: epf-mhi: Add support for SM8450
PCI: epf-mhi: Add eDMA support
PCI: qcom-ep: Add eDMA support
PCI: epf-mhi: Make use of the alignment restriction from EPF core
PCI: qcom-ep: Pass alignment restriction to the EPF core
- Configure controller so MHI bus master clock will be switched off while
in ASPM L1.x states (Manivannan Sadhasivam)
- Add sa8775p DT binding and driver support (Mrinmay Sarkar)
- Fix broken DT SDX65 "compatible" property (Krzysztof Kozlowski)
* pci/controller/qcom:
dt-bindings: PCI: qcom: Fix SDX65 compatible
PCI: qcom: Add support for sa8775p SoC
dt-bindings: PCI: qcom: Add sa8775p compatible
PCI: qcom-ep: Switch MHI bus master clock off during L1SS
- Fix DED and SEC interrupt bit offsets so interrupt handlers work
correctly (Daire McNamara)
- Make driver buildable as a module (Daire McNamara)
- Reorganize register #defines to align with hardware docs (Daire McNamara)
- Tweak register accessors to simplify callers (Daire McNamara)
- Refactor interrupt initialisation (Daire McNamara)
- Read FPGA MSI configuration parameters from hardware instead of
hard-coding them (Daire McNamara)
- Re-partition code between probe() and init() (Daire McNamara)
* pci/controller/microchip:
PCI: microchip: Re-partition code between probe() and init()
PCI: microchip: Gather MSI information from hardware config registers
PCI: microchip: Clean up initialisation of interrupts
PCI: microchip: Enable event handlers to access bridge and control pointers
PCI: microchip: Align register, offset, and mask names with HW docs
PCI: microchip: Enable building driver as a module
PCI: microchip: Correct the DED and SEC interrupt bit offsets
- Add support for link-down notification so the endpoint driver can process
LINK_DOWN events (Frank Li)
- Save Link Capabilities during probe so they can be restored when handling
a link-up event, since the controller loses the Link Width and Link Speed
values during reset (Xiaowei Bao)
* pci/controller/layerscape:
PCI: layerscape: Add workaround for lost link capabilities during reset
PCI: layerscape: Add support for link-down notification
- Use of_property_read_bool() instead of low-level accessors for boolean
properties (Rob Herring)
* pci/controller/iproc:
PCI: iproc: Use of_property_read_bool() for boolean properties
- To avoid a NULL pointer dereference, skip MSI restore after hibernate if
MSI/MSI-X hasn't been enabled (Dexuan Cui)
* pci/controller/hv:
PCI: hv: Fix a crash in hv_pci_restore_msi_msg() during hibernation
- Set the supported number of MSI vectors so we can use all available MSI
interrupts (Yong-Xuan Wang)
* pci/controller/fu740:
PCI: fu740: Set the number of MSI vectors
- Add an imx6 .host_deinit() callback so we can clean up things like
regulators on probe failure or driver unload (Mark Brown)
- Add PCIE_PME_TO_L2_TIMEOUT_US value for controller drivers that need to
manually synchronize power removal (Frank Li)
- Add generic dwc suspend/resume APIs (dw_pcie_suspend_noirq() and
dw_pcie_resume_noirq()) to be called by controller driver suspend/resume
ops, and a controller callback to send PME_Turn_Off (Frank Li)
- Add layerscape suspend/resume support, including manual
PME_Turn_off/PME_TO_Ack handshake (Hou Zhiqiang, Frank Li)
* pci/controller/dwc:
PCI: layerscape: Add power management support for ls1028a
PCI: dwc: Implement generic suspend/resume functionality
PCI: Add PCIE_PME_TO_L2_TIMEOUT_US L2 ready timeout value
PCI: dwc: Provide deinit callback for i.MX
- Assert PERST# when probing BCM2711 because some bootloaders don't do it
(Jim Quinlan)
* pci/controller/brcmstb:
PCI: brcmstb: Remove stale comment
PCI: brcmstb: Assert PERST# on BCM2711
Add support for voting interconnect (ICC) bandwidth based
on the link speed and width.
This commit is inspired from the basic interconnect support added
to pcie-qcom driver in commit c4860af88d ("PCI: qcom: Add basic
interconnect support").
The interconnect support is kept optional to be backward compatible
with legacy device trees.
[kwilczynski: add missing kernel-doc for the icc_mem variable]
Link: https://lore.kernel.org/linux-pci/1689751218-24492-5-git-send-email-quic_krichai@quicinc.com
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Sometimes, the Qcom PCIe EP controller can receive some interrupts
unknown to the driver, like safety interrupts in newer SoCs. In those
cases, if the driver doesn't clear the interrupts, it will end up in an
interrupt storm. However, the users will not know about it because the
log is treated as a debug message.
So let's treat the unknown event log as an error so that it at least
makes the user aware, thereby getting fixed eventually.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230726152931.18134-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Qualcomm PCIe Endpoint controllers have the in-built Embedded DMA (eDMA)
peripheral for offloading the data transfer between the PCIe bus and
memory.
Let's add support for it by enabling the eDMA IRQ in the driver. The
eDMA DMA Engine driver will handle the rest of the functionality.
Since the eDMA on Qualcomm platforms only uses a single IRQ for all
channels, use 1 for edma.nr_irqs.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230717065459.14138-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Qcom PCIe EP controllers have 4K alignment restriction for the outbound
window address. Hence, pass this info to the EPF core so that the EPF
drivers can make use of this info.
Link: https://lore.kernel.org/linux-pci/20230717065459.14138-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The busn member of struct mvebu_pcie is unused, so drop it.
Link: https://lore.kernel.org/r/20220905192310.22786-5-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A comment says that Multi-MSI is not supported by the driver.
A past commit [1] added this feature, so the comment is
incorrect and is removed.
[1] commit 198acab177 ("PCI: brcmstb: Enable Multi-MSI")
Link: https://lore.kernel.org/r/20230623144100.34196-6-james.quinlan@broadcom.com
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
The current PCIe driver assumes PERST# is asserted when probe() is invoked.
Some older versions of the 2711/RPi bootloader left PERST# unasserted, as
the Raspian OS does assert PERST# on probe(). For this reason, we assert
PERST# for BCM2711 SOCs (i.e. RPi).
Link: https://lore.kernel.org/r/20230623144100.34196-5-james.quinlan@broadcom.com
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Add PME_Turn_off/PME_TO_Ack handshake sequence for ls1028a platform.
Implemented on top of common dwc dw_pcie_suspend(resume)_noirq()
functions to handle system enter/exit suspend states.
Link: https://lore.kernel.org/r/20230821184815.2167131-4-Frank.Li@nxp.com
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Introduce an helper function (dw_pcie_get_ltssm()) to retrieve
SMLH_LTSS_STATE.
Add common dw_pcie_suspend(resume)_noirq() API to implement the DWC
controller generic suspend/resume functionality.
Add a controller specific callback to send the PME_Turn_Off message
(ie .pme_turn_off) for controller platform specific PME handling.
Link: https://lore.kernel.org/r/20230821184815.2167131-3-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[lpieralisi@kernel.org: commit log]
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
The endpoint controller loses the Maximum Link Width and Supported Link Speed
value from the Link Capabilities Register - initially configured by the Reset
Configuration Word (RCW) - during a link-down or hot reset event.
Address this issue in the endpoint event handler.
Link: https://lore.kernel.org/r/20230720135834.1977616-2-Frank.Li@nxp.com
Fixes: a805770d8a ("PCI: layerscape: Add EP mode support")
Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Add support to pass link-down notification to the endpoint function
driver so that it can process the LINK_DOWN event.
Link: https://lore.kernel.org/r/20230720135834.1977616-1-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
The iMSI-RX module of the DW PCIe controller provides multiple sets of
MSI_CTRL_INT_i_* registers, and each set is capable of handling 32 MSI
interrupts. However, the fu740 PCIe controller driver only enabled one set
of MSI_CTRL_INT_i_* registers, as the total number of supported interrupts
was not specified.
Set the supported number of MSI vectors to enable all the MSI_CTRL_INT_i_*
registers on the fu740 PCIe core, allowing the system to fully utilize the
available MSI interrupts.
Link: https://lore.kernel.org/r/20230807055621.2431-1-yongxuan.wang@sifive.com
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
When a Linux VM with an assigned PCI device runs on Hyper-V, if the PCI
device driver is not loaded yet (i.e. MSI-X/MSI is not enabled on the
device yet), doing a VM hibernation triggers a panic in
hv_pci_restore_msi_msg() -> msi_lock_descs(&pdev->dev), because
pdev->dev.msi.data is still NULL.
Avoid the panic by checking if MSI-X/MSI is enabled.
Link: https://lore.kernel.org/r/20230816175939.21566-1-decui@microsoft.com
Fixes: dc2b453290 ("PCI: hv: Rework MSI handling")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: sathyanarayanan.kuppuswamy@linux.intel.com
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
During domain reset process vmd_domain_reset() clears PCI
configuration space of VMD root ports. But certain platform
has observed following errors and failed to boot.
...
DMAR: VT-d detected Invalidation Queue Error: Reason f
DMAR: VT-d detected Invalidation Time-out Error: SID ffff
DMAR: VT-d detected Invalidation Completion Error: SID ffff
DMAR: QI HEAD: UNKNOWN qw0 = 0x0, qw1 = 0x0
DMAR: QI PRIOR: UNKNOWN qw0 = 0x0, qw1 = 0x0
DMAR: Invalidation Time-out Error (ITE) cleared
The root cause is that memset_io() clears prefetchable memory base/limit
registers and prefetchable base/limit 32 bits registers sequentially.
This seems to be enabling prefetchable memory if the device disabled
prefetchable memory originally.
Here is an example (before memset_io()):
PCI configuration space for 10000:00:00.0:
86 80 30 20 06 00 10 00 04 00 04 06 00 00 01 00
00 00 00 00 00 00 00 00 00 01 01 00 00 00 00 20
00 00 00 00 01 00 01 00 ff ff ff ff 75 05 00 00
...
So, prefetchable memory is ffffffff00000000-575000fffff, which is
disabled. When memset_io() clears prefetchable base 32 bits register,
the prefetchable memory becomes 0000000000000000-575000fffff, which is
enabled and incorrect.
Here is the quote from section 7.5.1.3.9 of PCI Express Base 6.0 spec:
The Prefetchable Memory Limit register must be programmed to a smaller
value than the Prefetchable Memory Base register if there is no
prefetchable memory on the secondary side of the bridge.
This is believed to be the reason for the failure and in addition the
sequence of operation in vmd_domain_reset() is not following the PCIe
specs.
Disable the bridge window by executing a sequence of operations
borrowed from pci_disable_bridge_window() and pci_setup_bridge_io(),
that comply with the PCI specifications.
Link: https://lore.kernel.org/r/20230810215029.1177379-1-nirmal.patel@linux.intel.com
Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
The i.MX integration for the DesignWare PCI controller has a _host_exit()
operation which undoes everything that the _host_init() operation does but
does not wire this up as the host_deinit callback for the core, or call it
in any path other than suspend. This means that if we ever unwind the
initial probe of the device, for example because it fails, the regulator
core complains that the regulators for the device were left enabled:
imx6q-pcie 33800000.pcie: iATU: unroll T, 4 ob, 4 ib, align 64K, limit 16G
imx6q-pcie 33800000.pcie: Phy link never came up
imx6q-pcie 33800000.pcie: Phy link never came up
imx6q-pcie: probe of 33800000.pcie failed with error -110
------------[ cut here ]------------
WARNING: CPU: 2 PID: 46 at drivers/regulator/core.c:2396 _regulator_put+0x110/0x128
Wire up the callback so that the core can clean up after itself.
Link: https://lore.kernel.org/r/20230731-pci-imx-regulator-cleanup-v2-1-fc8fa5c9893d@kernel.org
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Continuing to use pci_host_common_probe() for the PCIe Root Complex on
PolarFire SoC is leading to an extremely large _init() function and some
unnatural code flow. Re-partition the code so that some tasks are done
in a _probe() routine, which calls pci_host_common_probe() and then use
a much smaller _init() function, mainly to enable interrupts after
address translation tables are set up.
Link: https://lore.kernel.org/r/20230728131401.1615724-8-daire.mcnamara@microchip.com
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
The PCIe Root Complex on PolarFire SoC is configured at bitstream creation
time using Libero. Key MSI-related parameters include the number of
MSIs (1/2/4/8/16/32) and the MSI address. In the device driver, extract
this information from hardware registers at init time, and use it to configure
MSI system, including configuring MSI capability structure correctly in
configuration space.
Link: https://lore.kernel.org/r/20230728131401.1615724-7-daire.mcnamara@microchip.com
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Refactor interrupt handling in _init() function into
disable_interrupts(), init_interrupts(), clear_sec_errors() and clear
ded_errors() because current code is unwieldy and prone to bugs.
Disable interrupts as soon as possible and only enable interrupts after
address translation is setup to prevent spurious axi2pcie and pcie2axi
translation errors being reported.
Link: https://lore.kernel.org/r/20230728131401.1615724-6-daire.mcnamara@microchip.com
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Minor re-organisation so that event handlers can access both a pointer
to the bridge area of the PCIe Root Port and the control area of the PCIe
Root Port.
Link: https://lore.kernel.org/r/20230728131401.1615724-5-daire.mcnamara@microchip.com
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Minor code re-organisation so that macros representing registers ascend in
numerical order and use the same names as their hardware documentation.
Removed registers not used by the driver.
Link: https://lore.kernel.org/r/20230728131401.1615724-4-daire.mcnamara@microchip.com
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Enable building driver as a module. The expected use case is the
driver is built as a module, is installed when needed, and cannot be
removed once installed since it is not possible to clean-up
the irq_chip data structures on removal, as described in:
https://lore.kernel.org/linux-pci/87y1wgbah8.wl-maz@kernel.org/
The driver has .suppress_bind_attrs set to true for the same
reasons (ie prevent unbinding, that would leave the kernel
with stale IRQ configuration that cannot be cleaned up).
Link: https://lore.kernel.org/linux-pci/87y1wgbah8.wl-maz@kernel.org/
Link: https://lore.kernel.org/r/20230728131401.1615724-3-daire.mcnamara@microchip.com
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
The SEC and DED interrupt bits are laid out the wrong way round so the SEC
interrupt handler attempts to mask, unmask, and clear the DED interrupt
and vice versa. Correct the bit offsets so that each interrupt handler
operates properly.
Link: https://lore.kernel.org/r/20230728131401.1615724-2-daire.mcnamara@microchip.com
Fixes: 6f15a9c9f9 ("PCI: microchip: Add Microchip PolarFire PCIe controller driver")
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
When we have a struct pci_dev *, use pci_dev_id() instead of manually
composing the ID with PCI_DEVID() from dev->bus->number and dev->devfn.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20230807134858.116051-2-wangxiongfeng2@huawei.com
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
After commit 4fb8e46c1b ("PCI: tegra194: Enable support for 256 Byte
payload"), we initialize MPS=256 for tegra194 Root Ports before enumerating
the hierarchy.
Consider an Endpoint that supports only MPS=128. In the default situation
(CONFIG_PCIE_BUS_DEFAULT set and no "pci=pcie_bus_*" parameter), Linux
tries to configure the MPS of every device to match the upstream bridge.
If the Endpoint is directly below the Root Port, Linux can reduce the Root
Port MPS to 128 to match the Endpoint. But if there's a switch in the
middle, Linux doesn't reduce the Root Port MPS because other devices below
the switch may already be configured with MPS larger than 128.
This scenario results in uncorrectable Malformed TLP errors if the Root
Port sends TLPs with payloads larger than 128 bytes. These errors can
be avoided by using the "pci=pcie_bus_safe" parameter, but it doesn't
seem to be a good idea to always have this parameter even for basic
functionality to work.
Revert commit 4fb8e46c1b ("PCI: tegra194: Enable support for 256 Byte
payload") so the Root Ports default to MPS=128, which all devices
support.
If peer-to-peer DMA is not required, one can use "pci=pcie_bus_perf" to
get the benefit of larger MPS settings.
[bhelgaas: commit log; kwilczynski: retain "u16 val_16" declaration at
the top, add missing acked by tag]
Fixes: 4fb8e46c1b ("PCI: tegra194: Enable support for 256 Byte payload")
Link: https://lore.kernel.org/linux-pci/20230619102604.3735001-1-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Cc: stable@vger.kernel.org # v6.0-rc1+
This reverts commit da56a1bfba.
Bjorn Andersson, Fabio Estevam, Xiaolei Wang, and Jon Hunter reported that
da56a1bfba ("PCI: dwc: Wait for link up only if link is started") broke
controller probing by returning an error in case the link does not come up
during host initialisation, for example when the slot is empty.
As explained in commit 886a9c1347 ("PCI: dwc: Move link handling into
common code") and as indicated by the comment "Ignore errors, the link may
come up later" in the code, waiting for link up and ignoring errors is the
intended behaviour:
Let's standardize this to succeed as there are usecases where devices
(and the link) appear later even without hotplug. For example, a
reconfigured FPGA device.
Reverting the offending commit specifically fixes a regression on Qualcomm
platforms like the Lenovo ThinkPad X13s which no longer reach the
interconnect sync state if a slot does not have a device populated (e.g. an
optional modem).
Note that enabling asynchronous probing by default as was done for Qualcomm
platforms by commit c0e1eb441b ("PCI: qcom: Enable async probe by
default"), should take care of any related boot time concerns.
Finally, note that the intel-gw driver is the only driver currently not
providing a .start_link() callback and instead starts the link in its
.host_init() callback, which may avoid an additional one-second timeout
during probe by making the link-up wait conditional. If anyone cares, that
can be done in a follow-up patch with a proper motivation.
[bhelgaas: add Fabio Estevam, Xiaolei Wang, Jon Hunter reports]
Fixes: da56a1bfba ("PCI: dwc: Wait for link up only if link is started")
Link: https://lore.kernel.org/r/20230706082610.26584-1-johan+linaro@kernel.org
Reported-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reported-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20230704122635.1362156-1-festevam@gmail.com/
Reported-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Link: https://lore.kernel.org/r/20230705010624.3912934-1-xiaolei.wang@windriver.com/
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/6ca287a1-6c7c-7b90-9022-9e73fb82b564@nvidia.com
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Sajid Dalvi <sdalvi@google.com>
Cc: Ajay Agarwal <ajayagarwal@google.com>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus. As
part of that merge prepping Arm DT support 13 years ago, they "temporarily"
include each other. They also include platform_device.h and of.h. As a
result, there's a pretty much random mix of those include files used
throughout the tree. In order to detangle these headers and replace the
implicit includes with struct declarations, users need to explicitly
include the correct includes.
Link: https://lore.kernel.org/r/20230714174827.4061572-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
A 32-bit mask was used on the 64-bit PCI address used for mapping MSIs.
This would result in the upper 32 bits being unintentionally zeroed and
MSIs getting mapped to incorrect PCI addresses if the address had any
of the upper bits set.
Replace 32-bit mask by appropriate 64-bit mask.
[kwilczynski: use GENMASK_ULL() over GENMASK() for 32-bit compatibility]
Fixes: dc73ed0f1b ("PCI: rockchip: Fix window mapping and address translation for endpoint")
Closes: https://lore.kernel.org/linux-pci/8d19e5b7-8fa0-44a4-90e2-9bb06f5eb694@moroto.mountain
Link: https://lore.kernel.org/linux-pci/20230703085845.2052008-1-rick.wertenbroek@gmail.com
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Rather than casting void(*)(struct clk *) to void (*)(void *), that
forces conversion to an incompatible function type, replace the cast
with a small local stub function with a signature that matches what
the devm_add_action_or_reset() function expects.
The sub function takes a void *, then passes it directly to
clk_disable_unprepare(), which handles the more specific type.
Reported by clang when building with warnings enabled:
drivers/pci/controller/pcie-microchip-host.c:866:32: warning: cast from 'void (*)(struct clk *)' to 'void (*)(void *)' converts to incompatible function type [-Wcast-function-type-strict]
devm_add_action_or_reset(dev, (void (*) (void *))clk_disable_unprepare,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
No functional changes are intended.
Fixes: 6f15a9c9f9 ("PCI: microchip: Add Microchip PolarFire PCIe controller driver")
Link: https://lore.kernel.org/linux-pci/20230629165956.237832-3-kwilczynski@kernel.org
Link: https://lore.kernel.org/linux-pci/20230511-pci-microchip-clk-cast-v1-1-7674f4d4e218@kernel.org
Link: https://lore.kernel.org/linux-pci/20230111125323.1911373-3-daire.mcnamara@microchip.com
Co-developed-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Co-developed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Rather than casting void(*)(struct clk *) to void (*)(void *), that
forces conversion to an incompatible function type, replace the cast
with a small local stub function with a signature that matches what
the devm_add_action_or_reset() function expects.
The sub function takes a void *, then passes it directly to
clk_disable_unprepare(), which handles the more specific type.
Reported by clang when building with warnings enabled:
drivers/pci/controller/dwc/pcie-keembay.c:172:12: warning: cast from 'void (*)(struct clk *)' to 'void (*)(void *)' converts to incompatible function type [-Wcast-function-type-strict]
(void(*)(void *))clk_disable_unprepare,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
No functional changes are intended.
Fixes: 0c87f90b4c ("PCI: keembay: Add support for Intel Keem Bay")
Link: https://lore.kernel.org/linux-pci/20230629165956.237832-2-kwilczynski@kernel.org
Acked-by: Srikanth Thokala <srikanth.thokala@intel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Rather than casting void(*)(struct clk *) to void (*)(void *), that
forces conversion to an incompatible function type, replace the cast
with a small local stub function with a signature that matches what
the devm_add_action_or_reset() function expects.
The sub function takes a void *, then passes it directly to
clk_disable_unprepare(), which handles the more specific type.
Reported by clang when building with warnings enabled:
drivers/pci/controller/dwc/pci-meson.c:191:6: warning: cast from 'void (*)(struct clk *)' to 'void (*)(void *)' converts to incompatible function type [-Wcast-function-type-strict]
(void (*) (void *))clk_disable_unprepare,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
No functional changes are intended.
Fixes: 9c0ef6d34f ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver")
Link: https://lore.kernel.org/linux-pci/20230629165956.237832-1-kwilczynski@kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Convert calls to platform_get_resource() and devm_ioremap_resource()
into a single call to devm_platform_get_and_ioremap_resource(), to
simplify the code.
This new helper added in commit 890cc39a87 ("drivers: provide
devm_platform_get_and_ioremap_resource()") does what both of the
other separate functions do.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230323074553.90372-1-yang.lee@linux.alibaba.com
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Convert calls to platform_get_resource() and devm_ioremap_resource()
into a single call to devm_platform_get_and_ioremap_resource(), to
simplify the code.
This new helper added in commit 890cc39a87 ("drivers: provide
devm_platform_get_and_ioremap_resource()") does what both of the
other separate functions do.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230323090011.66754-1-yang.lee@linux.alibaba.com
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Convert calls to platform_get_resource() and devm_ioremap_resource()
into a single call to devm_platform_get_and_ioremap_resource(), to
simplify the code.
This new helper added in commit 890cc39a87 ("drivers: provide
devm_platform_get_and_ioremap_resource()") does what both of the
other separate functions do.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230323090431.73526-1-yang.lee@linux.alibaba.com
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Convert calls to platform_get_resource() and devm_ioremap_resource()
into a single call to devm_platform_get_and_ioremap_resource(), to
simplify the code.
This new helper added in commit 890cc39a87 ("drivers: provide
devm_platform_get_and_ioremap_resource()") does what both of the
other separate functions do.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230323091644.91981-1-yang.lee@linux.alibaba.com
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Currently, as part of the qcom_pcie_perst_deassert() function, instead
of writing the updated value to clear PARF_MSTR_AXI_CLK_EN, the variable
"val" is re-read.
This must be fixed to ensure that the master clock supplied to the MHI
bus is correctly gated during L1.1/L1.2 to save power.
Thus, replace the line that re-reads "val" with a line that writes the
updated value to the register to clear PARF_MSTR_AXI_CLK_EN.
[kwilczynski: commit log]
Fixes: c457ac029e ("PCI: qcom-ep: Gate Master AXI clock to MHI bus during L1SS")
Link: https://lore.kernel.org/linux-pci/20230627141036.11600-1-manivannan.sadhasivam@linaro.org
Reported-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Replace low-level property access functions like of_get_property() and
of_find_property() with their typed equivalents (i.e., of_property_read_<type>
functions), as it's preferred to use typed property access functions for
reading properties.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230609193326.1963542-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Ray Jui <ray.jui@broadcom.com>
The apple_pcie_setup_port() function computes ilog2(pcie->nvecs) to set
up the number of MSIs available for each port. However, it's called
before apple_msi_init(), which initializes pcie->nvecs.
Luckily, pcie->nvecs is part of kzalloc()-ed structure and, as such,
initialized as zero. ilog2(0) happens to be 0xffffffff which then simply
configures more MSIs in hardware than we have. This doesn't break
anything because we never hand out those vectors.
Thus, swap the order of the two calls so that the correctly initialized
value is then used.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230311133453.63246-1-sven@svenpeter.dev
Fixes: 476c41ed45 ("PCI: apple: Implement MSI support")
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
New support:
- TI J721S2 CSI BCDMA support
Updates:
- Native HDMI support for dw edma driver
- ste dma40 updates for supporting proper SRAM handle in DT
- removal of dma device chancnt setting in drivers
-----BEGIN PGP SIGNATURE-----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=pGmA
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New support:
- TI J721S2 CSI BCDMA support
Updates:
- Native HDMI support for dw edma driver
- ste dma40 updates for supporting proper SRAM handle in DT
- removal of dma device chancnt setting in drivers"
* tag 'dmaengine-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (28 commits)
dmaengine: sprd: Don't set chancnt
dmaengine: hidma: Don't set chancnt
dmaengine: plx_dma: Don't set chancnt
dmaengine: axi-dmac: Don't set chancnt
dmaengine: dw-axi-dmac: Don't set chancnt
dmaengine: qcom: bam_dma: allow omitting num-{channels,ees}
dmaengine: dw-edma: Add HDMA DebugFS support
dmaengine: dw-edma: Add support for native HDMA
dmaengine: dw-edma: Create a new dw_edma_core_ops structure to abstract controller operation
dmaengine: dw-edma: Rename dw_edma_core_ops structure to dw_edma_plat_ops
dmaengine: ste_dma40: use proper format string for resource_size_t
dmaengine: make QCOM_HIDMA depend on HAS_IOMEM
dmaengine: ste_dma40: fix typo in enum documentation
dmaengine: ste_dma40: use correct print specfier for resource_size_t
MAINTAINERS: Add myself as the DW eDMA driver reviewer
MAINTAINERS: Add Manivannan to DW eDMA driver maintainers list
MAINTAINERS: Demote Gustavo Pimentel to DW EDMA driver reviewer
dmaengine: ti: k3-udma: Add support for J721S2 CSI BCDMA instance
dt-bindings: dma: ti: Add J721S2 BCDMA
dmaengine: ti: k3-psil-j721s2: Add PSI-L thread map for main CPSW2G
...
-----BEGIN PGP SIGNATURE-----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=xpTd
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Export pcie_retrain_link() for use outside ASPM
- Add Data Link Layer Link Active Reporting as another way for
pcie_retrain_link() to determine the link is up
- Work around link training failures (especially on the ASMedia
ASM2824 switch) by training first at 2.5GT/s and then attempting
higher rates
Resource management:
- When we coalesce host bridge windows, remove invalidated resources
from the resource tree so future allocations work correctly
Hotplug:
- Cancel bringup sequence if card is not present, to keep from
blinking Power Indicator indefinitely
- Reassign bridge resources if necessary for ACPI hotplug
Driver binding:
- Convert platform_device .remove() callbacks to return void instead
of a mostly useless int
Power management:
- Reduce wait time for secondary bus to be ready to speed up resume
- Avoid putting EloPOS E2/S2/H2 (as well as Elo i2) PCIe Ports in
D3cold
- Call _REG when transitioning D-states so AML that uses the PCI
config space OpRegion works, which fixes some ASMedia GPIO
controllers after resume
Virtualization:
- Delay extra 250ms after FLR of Solidigm P44 Pro NVMe to avoid KVM
hang when guest is rebooted
- Add function 1 DMA alias quirk for Marvell 88SE9235
Error handling:
- Unexport pci_save_aer_state() since it's only used in drivers/pci/
- Drop recommendation for drivers to configure AER Capability, since
the PCI core does this for all devices
ASPM:
- Disable ASPM on MFD function removal to avoid use-after-free
- Tighten up pci_enable_link_state() and pci_disable_link_state()
interfaces so they don't enable/disable states the driver didn't
specify
- Avoid link retraining race that can happen if ASPM sets link
control parameters while the link is in the midst of training for
some other reason
Endpoint framework:
- Change "PCI Endpoint Virtual NTB driver" Kconfig prompt to be
different from "PCI Endpoint NTB driver"
- Automatically create a function specific attributes group for
endpoint drivers to avoid reference counting issues
- Fix many EPC test issues
- Return pci_epf_type_add_cfs() error if EPF has no driver
- Add kernel-doc for pci_epc_raise_irq() and pci_epc_map_msi_irq()
MSI vector parameters
- Pass EPF device ID to driver probe functions
- Return -EALREADY if EPC has already been started/stopped
- Add linkdown notifier support and use it in qcom-ep
- Add Bus Master Enable event support and use it in qcom-ep
- Add Qualcomm Modem Host Interface (MHI) endpoint driver
- Add Layerscape PME interrupt handling to manage link-up
notification
Cadence PCIe controller driver:
- Wait for link retrain to complete when working around the J721E
i2085 erratum with Gen2 mode
Faraday FTPC100 PCI controller driver:
- Release clock resources on error paths
Freescale i.MX6 PCIe controller driver:
- Save and restore Root Port MSI control to work around hardware defect
Intel VMD host bridge driver:
- Reset VMD config register between soft reboots
- Capture pci_reset_bus() return value instead of printing junk when
it fails
Qualcomm PCIe controller driver:
- Add SDX65 endpoint compatible string to DT binding
- Disable register write access after init for IP v2.3.3, v2.9.0
- Use DWC helpers for enabling/disabling writes to DBI registers
- Hide slot hotplug capability for IP v1.0.0, v1.9.0, v2.1.0, v2.3.2,
v2.3.3, v2.7.0, v2.9.0
- Reuse v2.3.2 post-init sequence for v2.4.0
Renesas R-Car PCIe controller driver:
- Remove unused static pcie_base and pcie_dev
Rockchip PCIe controller driver:
- Remove writes to unused registers
- Write endpoint Device ID using correct register
- Assert PCI Configuration Enable bit after probe so endpoint
responds instead of generating Request Retry Status messages
- Poll waiting for PHY PLLs to lock
- Update RK3399 example DT binding to be valid
- Use RK3399 PCIE_CLIENT_LEGACY_INT_CTRL to generate INTx instead of
manually generating PCIe message
- Use multiple windows to avoid address translation conflicts
- Use u32 (not u16) when accessing 32-bit registers
- Hide MSI-X Capability, since RK3399 can't generate MSI-X
- Set endpoint controller required alignment to 256
Synopsys DesignWare PCIe controller driver:
- Wait for link to come up only if we've initiated link training
Miscellaneous:
- Add pci_clear_master() stub for non-CONFIG_PCI"
* tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
Documentation: PCI: correct spelling
PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain()
PCI: xgene-msi: Convert to platform remove callback returning void
PCI: tegra: Convert to platform remove callback returning void
PCI: rockchip-host: Convert to platform remove callback returning void
PCI: mvebu: Convert to platform remove callback returning void
PCI: mt7621: Convert to platform remove callback returning void
PCI: mediatek-gen3: Convert to platform remove callback returning void
PCI: mediatek: Convert to platform remove callback returning void
PCI: iproc: Convert to platform remove callback returning void
PCI: hisi-error: Convert to platform remove callback returning void
PCI: dwc: Convert to platform remove callback returning void
PCI: j721e: Convert to platform remove callback returning void
PCI: brcmstb: Convert to platform remove callback returning void
PCI: altera-msi: Convert to platform remove callback returning void
PCI: altera: Convert to platform remove callback returning void
PCI: aardvark: Convert to platform remove callback returning void
PCI: rcar: Use correct product family name for Renesas R-Car
PCI: layerscape: Add the endpoint linkup notifier support
PCI: endpoint: pci-epf-vntb: Fix typo in comments
...
Nothing surprising in the SoC specific drivers, with the usual updates:
* Added or improved SoC driver support for Tegra234, Exynos4121, RK3588,
as well as multiple Mediatek and Qualcomm chips
* SCMI firmware gains support for multiple SMC/HVC transport and version
3.2 of the protocol
* Cleanups amd minor changes for the reset controller, memory controller,
firmware and sram drivers
* Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers
-----BEGIN PGP SIGNATURE-----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=zvLr
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Nothing surprising in the SoC specific drivers, with the usual
updates:
- Added or improved SoC driver support for Tegra234, Exynos4121,
RK3588, as well as multiple Mediatek and Qualcomm chips
- SCMI firmware gains support for multiple SMC/HVC transport and
version 3.2 of the protocol
- Cleanups amd minor changes for the reset controller, memory
controller, firmware and sram drivers
- Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers"
* tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (118 commits)
dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
MAINTAINERS: add PHY-related files to Amlogic SoC file list
drivers: meson: secure-pwrc: always enable DMA domain
tee: optee: Use kmemdup() to replace kmalloc + memcpy
soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
dt-bindings: sram: qcom,imem: document qdu1000
soc: qcom: icc-bwmon: Fix MSM8998 count unit
dt-bindings: soc: qcom,rpmh-rsc: Require power-domains
soc: qcom: socinfo: Add Soc ID for IPQ5300
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
soc: qcom: Fix a IS_ERR() vs NULL bug in probe
soc: qcom: socinfo: Add support for new fields in revision 19
soc: qcom: socinfo: Add support for new fields in revision 18
dt-bindings: firmware: scm: Add compatible for SDX75
soc: qcom: mdt_loader: Fix split image detection
dt-bindings: memory-controllers: drop unneeded quotes
soc: rockchip: dtpm: use C99 array init syntax
firmware: tegra: bpmp: Add support for DRAM MRQ GSCs
soc/tegra: pmc: Use devm_clk_notifier_register()
soc/tegra: pmc: Simplify debugfs initialization
...
- Change "PCI Endpoint Virtual NTB driver" Kconfig prompt to be different
from "PCI Endpoint NTB driver" (Shunsuke Mie)
- Automatically create a function specific attributes group for endpoint
drivers to avoid reference counting issues (Damien Le Moal)
- Move and unexport pci_epf_type_add_cfs() (Damien Le Moal)
- Reinitialize EPF test DMA transfer completion before submitting it to
avoid losing the completion notification (Damien Le Moal)
- Fix EPF test DMA transfer completion detection (Damien Le Moal)
- Submit EPF test DMA transfers with dmaengine_submit(), not tx_submit()
(Damien Le Moal)
- Simplify EPF test read/write/copy functions (Damien Le Moal)
- Simplify EPF test "raise IRQ" interface (Damien Le Moal)
- Simplify EPF test IRQ command execution (Damien Le Moal)
- Improve EPF test command/status register handling (Damien Le Moal)
- Free IRQs before removing device (Damien Le Moal)
- Reinitialize IRQ completions for every test (Damien Le Moal)
- Don't write status in IRQ handler to avoid race (Damien Le Moal)
- Fix dma_chan direction in data transfer test (Yoshihiro Shimoda)
- Return pci_epf_type_add_cfs() error if EPF has no driver (Damien Le Moal)
- Add kernel-doc for pci_epc_raise_irq() and pci_epc_map_msi_irq() MSI
vector parameters (Manivannan Sadhasivam)
- Pass EPF device ID to driver probe functions (Manivannan Sadhasivam)
- Return -EALREADY if EPC has already been started/stopped (Manivannan
Sadhasivam)
- Add linkdown notifier support and use it in qcom-ep (Manivannan
Sadhasivam)
- Add Bus Master Enable event support and use it in qcom-ep (Manivannan
Sadhasivam)
- Add Qualcomm Modem Host Interface (MHI) endpoint driver (Manivannan
Sadhasivam)
- Add Layerscape PME interrupt handling to manage link-up notification
(Frank Li)
* pci/controller/endpoint:
PCI: layerscape: Add the endpoint linkup notifier support
PCI: endpoint: pci-epf-vntb: Fix typo in comments
MAINTAINERS: Add PCI MHI endpoint function driver under MHI bus
PCI: endpoint: Add PCI Endpoint function driver for MHI bus
PCI: qcom-ep: Add support for BME notification
PCI: qcom-ep: Add support for Link down notification
PCI: endpoint: Add BME notifier support
PCI: endpoint: Add linkdown notifier support
PCI: endpoint: Return error if EPC is started/stopped multiple times
PCI: endpoint: Pass EPF device ID to the probe function
PCI: endpoint: Add missing documentation about the MSI/MSI-X range
PCI: endpoint: Improve pci_epf_type_add_cfs()
PCI: endpoint: functions/pci-epf-test: Fix dma_chan direction
misc: pci_endpoint_test: Simplify pci_endpoint_test_msi_irq()
misc: pci_endpoint_test: Do not write status in IRQ handler
misc: pci_endpoint_test: Re-init completion for every test
misc: pci_endpoint_test: Free IRQs before removing the device
PCI: epf-test: Simplify transfers result print
PCI: epf-test: Simplify DMA support checks
PCI: epf-test: Cleanup request result handling
PCI: epf-test: Cleanup pci_epf_test_cmd_handler()
PCI: epf-test: Improve handling of command and status registers
PCI: epf-test: Simplify IRQ test commands execution
PCI: epf-test: Simplify pci_epf_test_raise_irq()
PCI: epf-test: Simplify read/write/copy test functions
PCI: epf-test: Use dmaengine_submit() to initiate DMA transfer
PCI: epf-test: Fix DMA transfer completion detection
PCI: epf-test: Fix DMA transfer completion initialization
PCI: endpoint: Move pci_epf_type_add_cfs() code
PCI: endpoint: Automatically create a function specific attributes group
PCI: endpoint: Fix a Kconfig prompt of vNTB driver
- Remove writes to unused registers (Rick Wertenbroek)
- Write endpoint Device ID using correct register (Rick Wertenbroek)
- Assert PCI Configuration Enable bit after probe so endpoint responds
instead of generating Request Retry Status messages (Rick Wertenbroek)
- Poll waiting for PHY PLLs to lock (Rick Wertenbroek)
- Update RK3399 example DT binding to be valid (Rick Wertenbroek)
- Use RK3399 PCIE_CLIENT_LEGACY_INT_CTRL to generate INTx instead of
manually generating PCIe message (Rick Wertenbroek)
- Use multiple windows to avoid address translation conflicts (Rick
Wertenbroek)
- Use u32 (not u16) when accessing 32-bit registers (Rick Wertenbroek)
- Hide MSI-X Capability, since RK3399 can't generate MSI-X (Rick
Wertenbroek)
- Set endpoint controller required alignment to 256 (Damien Le Moal)
* pci/controller/rockchip:
PCI: rockchip: Set address alignment for endpoint mode
PCI: rockchip: Don't advertise MSI-X in PCIe capabilities
PCI: rockchip: Use u32 variable to access 32-bit registers
PCI: rockchip: Fix window mapping and address translation for endpoint
PCI: rockchip: Fix legacy IRQ generation for RK3399 PCIe endpoint core
dt-bindings: PCI: Update the RK3399 example to a valid one
PCI: rockchip: Add poll and timeout to wait for PHY PLLs to be locked
PCI: rockchip: Assert PCI Configuration Enable bit after probe
PCI: rockchip: Write PCI Device ID to correct register
PCI: rockchip: Remove writes to unused registers
- Remove unused static pcie_base and pcie_dev (Geert Uytterhoeven)
* pci/controller/rcar:
PCI: rcar: Use correct product family name for Renesas R-Car
PCI: rcar-host: Remove unused static pcie_base and pcie_dev
- Disable register write access after init for IP v2.3.3, v2.9.0
(Manivannan Sadhasivam)
- Use DWC helpers for enabling/disabling writes to DBI registers
(Manivannan Sadhasivam)
- Hide slot hotplug capability for IP v1.0.0, v1.9.0, v2.1.0, v2.3.2,
v2.3.3, v2.7.0, v2.9.0 (Manivannan Sadhasivam)
- Reuse v2.3.2 post-init sequence for v2.4.0 (Manivannan Sadhasivam)
-
* pci/controller/qcom:
PCI: qcom: Do not advertise hotplug capability for IP v2.1.0
PCI: qcom: Do not advertise hotplug capability for IP v1.0.0
PCI: qcom: Use post init sequence of IP v2.3.2 for v2.4.0
PCI: qcom: Do not advertise hotplug capability for IP v2.3.2
PCI: qcom: Do not advertise hotplug capability for IPs v2.3.3 and v2.9.0
PCI: qcom: Do not advertise hotplug capability for IPs v2.7.0 and v1.9.0
PCI: qcom: Disable write access to read only registers for IP v2.9.0
PCI: qcom: Use DWC helpers for modifying the read-only DBI registers
PCI: qcom: Disable write access to read only registers for IP v2.3.3
- Wait for link to come up only if we've initiated link training (Ajay
Agarwal)
- Save and restore imx6 Root Port MSI control to work around hardware
defect (Richard Zhu)
* pci/controller/dwc:
PCI: imx6: Save and restore root port MSI control in suspend and resume
PCI: dwc: Wait for link up only if link is started
The ret variable in the vmd_enable_domain() function was used
uninitialized when printing a warning message upon failure of
the pci_reset_bus() function.
Thus, fix the issue by assigning ret with the value returned from
pci_reset_bus() before referencing it in the warning message.
This was detected by Smatch:
drivers/pci/controller/vmd.c:931 vmd_enable_domain() error: uninitialized symbol 'ret'.
[kwilczynski: drop the second patch from the series, add missing reported
by tag, commit log]
Fixes: 0a584655ef ("PCI: vmd: Fix secondary bus reset for Intel bridges")
Link: https://lore.kernel.org/all/202305270219.B96IiIfv-lkp@intel.com
Link: https://lore.kernel.org/linux-pci/20230420094332.1507900-2-korantwork@gmail.com
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Xinghui Li <korantli@tencent.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-16-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-15-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-14-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-13-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-12-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-10-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks.
The iproc driver always returns 0, it's just a bit hidden. So make
iproc_pcie_remove() return void instead of always zero and convert the
platform driver to the alternative remove callback that returns void and
eventually replaces the int returning callback.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-9-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-8-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert the dwc drivers from always returning zero in the remove
callback to the void returning variant.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/linux-pci/20230321193208.366561-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Renesas uses "R-Car" as the name for their product family and development
platform. Thus, correct other variants such as "rcar", "RCar", "Rcar",
etc., to the preferred spelling.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230607204750.27837-1-wsa+renesas@sang-engineering.com
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Layerscape has PME interrupt, which can be used as linkup notifier. Set
CFG_READY bit of PEX_PF0_CONFIG to enable accesses from root complex when
linkup detected.
Link: https://lore.kernel.org/r/20230515151049.2797105-1-Frank.Li@nxp.com
Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add support to pass BME (Bus Master Enable) notification to Endpoint
function driver so that the BME event can be processed by the function.
Link: https://lore.kernel.org/r/20230602114756.36586-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Add support to pass Link down notification to Endpoint function driver so
that the LINK_DOWN event can be processed by the function.
Link: https://lore.kernel.org/r/20230602114756.36586-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
The address translation unit of the rockchip EP controller does not use
the lower 8 bits of a PCIe-space address to map local memory. Thus we
must set the align feature field to 256 to let the user know about this
constraint.
Link: https://lore.kernel.org/r/20230418074700.1083505-12-rick.wertenbroek@gmail.com
Fixes: cf590b0783 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org
The RK3399 PCIe endpoint controller cannot generate MSI-X IRQs.
This is documented in the RK3399 technical reference manual (TRM)
section 17.5.9 "Interrupt Support".
MSI-X capability should therefore not be advertised. Remove the
MSI-X capability by editing the capability linked-list. The
previous entry is the MSI capability, therefore get the next
entry from the MSI-X capability entry and set it as next entry
for the MSI capability. This in effect removes MSI-X from the list.
Linked list before : MSI cap -> MSI-X cap -> PCIe Device cap -> ...
Linked list now : MSI cap -> PCIe Device cap -> ...
Link: https://lore.kernel.org/r/20230418074700.1083505-11-rick.wertenbroek@gmail.com
Fixes: cf590b0783 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Previously u16 variables were used to access 32-bit registers, this
resulted in not all of the data being read from the registers. Also
the left shift of more than 16-bits would result in moving data out
of the variable. Use u32 variables to access 32-bit registers
Link: https://lore.kernel.org/r/20230418074700.1083505-10-rick.wertenbroek@gmail.com
Fixes: cf590b0783 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
The RK3399 PCI endpoint core has 33 windows for PCIe space, now in the
driver up to 32 fixed size (1M) windows are used and pages are allocated
and mapped accordingly. The driver first used a single window and allocated
space inside which caused translation issues (between CPU space and PCI
space) because a window can only have a single translation at a given
time, which if multiple pages are allocated inside will cause conflicts.
Now each window is a single region of 1M which will always guarantee that
the translation is not in conflict.
Set the translation register addresses for physical function. As documented
in the technical reference manual (TRM) section 17.5.5 "PCIe Address
Translation" and section 17.6.8 "Address Translation Registers Description"
Link: https://lore.kernel.org/r/20230418074700.1083505-9-rick.wertenbroek@gmail.com
Fixes: cf590b0783 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Fix legacy IRQ generation for RK3399 PCIe endpoint core according to
the technical reference manual (TRM). Assert and deassert legacy
interrupt (INTx) through the legacy interrupt control register
("PCIE_CLIENT_LEGACY_INT_CTRL") instead of manually generating a PCIe
message. The generation of the legacy interrupt was tested and validated
with the PCIe endpoint test driver.
Link: https://lore.kernel.org/r/20230418074700.1083505-8-rick.wertenbroek@gmail.com
Fixes: cf590b0783 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
The RK3399 PCIe controller should wait until the PHY PLLs are locked.
Add poll and timeout to wait for PHY PLLs to be locked. If they cannot
be locked generate error message and jump to error handler. Accessing
registers in the PHY clock domain when PLLs are not locked causes hang
The PHY PLLs status is checked through a side channel register.
This is documented in the TRM section 17.5.8.1 "PCIe Initialization
Sequence".
Link: https://lore.kernel.org/r/20230418074700.1083505-5-rick.wertenbroek@gmail.com
Fixes: cf590b0783 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Assert PCI Configuration Enable bit after probe. When this bit is left to
0 in the endpoint mode, the RK3399 PCIe endpoint core will generate
configuration request retry status (CRS) messages back to the root complex.
Assert this bit after probe to allow the RK3399 PCIe endpoint core to reply
to configuration requests from the root complex.
This is documented in section 17.5.8.1.2 of the RK3399 TRM.
Link: https://lore.kernel.org/r/20230418074700.1083505-4-rick.wertenbroek@gmail.com
Fixes: cf590b0783 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Write PCI Device ID (DID) to the correct register. The Device ID was not
updated through the correct register. Device ID was written to a read-only
register and therefore did not work. The Device ID is now set through the
correct register. This is documented in the RK3399 TRM section 17.6.6.1.1
Link: https://lore.kernel.org/r/20230418074700.1083505-3-rick.wertenbroek@gmail.com
Fixes: cf590b0783 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Remove write accesses to registers that are marked "unused" (and
therefore read-only) in the technical reference manual (TRM)
(see RK3399 TRM 17.6.8.1)
Link: https://lore.kernel.org/r/20230418074700.1083505-2-rick.wertenbroek@gmail.com
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
SoCs making use of Qcom PCIe controller IP v2.1.0 do not support hotplug
functionality. But the hotplug capability bit is set by default in the
hardware. This causes the kernel PCI core to register hotplug service for
the controller and send hotplug commands to it. But those commands will
timeout generating messages as below during boot and suspend/resume.
[ 5.782159] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2020 msec ago)
[ 5.810161] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2048 msec ago)
[ 7.838162] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x07c0 (issued 2020 msec ago)
[ 7.870159] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x07c0 (issued 2052 msec ago)
This not only spams the console output but also induces a delay of a
couple of seconds. To fix this issue, let's clear the HPC bit in
PCI_EXP_SLTCAP register as a part of the post init sequence to not
advertise the hotplug capability for the controller.
Link: https://lore.kernel.org/r/20230619150408.8468-10-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
SoCs making use of Qcom PCIe controller IP v1.0.0 do not support hotplug
functionality. But the hotplug capability bit is set by default in the
hardware. This causes the kernel PCI core to register hotplug service for
the controller and send hotplug commands to it. But those commands will
timeout generating messages as below during boot and suspend/resume.
[ 5.782159] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2020 msec ago)
[ 5.810161] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2048 msec ago)
[ 7.838162] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x07c0 (issued 2020 msec ago)
[ 7.870159] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x07c0 (issued 2052 msec ago)
This not only spams the console output but also induces a delay of a
couple of seconds. To fix this issue, let's clear the HPC bit in
PCI_EXP_SLTCAP register as a part of the post init sequence to not
advertise the hotplug capability for the controller.
Link: https://lore.kernel.org/r/20230619150408.8468-9-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
The post init sequence of IP v2.4.0 is same as v2.3.2. So let's reuse the
v2.3.2 sequence which now also disables hotplug capability of the
controller as it is not at all supported on any SoCs making use of this IP.
Link: https://lore.kernel.org/r/20230619150408.8468-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
SoCs making use of Qcom PCIe controller IP v2.3.2 do not support hotplug
functionality. But the hotplug capability bit is set by default in the
hardware. This causes the kernel PCI core to register hotplug service for
the controller and send hotplug commands to it. But those commands will
timeout generating messages as below during boot and suspend/resume.
[ 5.782159] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2020 msec ago)
[ 5.810161] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2048 msec ago)
[ 7.838162] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x07c0 (issued 2020 msec ago)
[ 7.870159] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x07c0 (issued 2052 msec ago)
This not only spams the console output but also induces a delay of a
couple of seconds. To fix this issue, let's clear the HPC bit in
PCI_EXP_SLTCAP register as a part of the post init sequence to not
advertise the hotplug capability for the controller.
Link: https://lore.kernel.org/r/20230619150408.8468-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
SoCs making use of Qcom PCIe controller IPs v2.3.3 and v2.9.0 do not
support hotplug functionality. But the hotplug capability bit is set by
default in the hardware. This causes the kernel PCI core to register
hotplug service for the controller and send hotplug commands to it. But
those commands will timeout generating messages as below during boot
and suspend/resume.
[ 5.782159] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2020 msec ago)
[ 5.810161] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2048 msec ago)
[ 7.838162] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x07c0 (issued 2020 msec ago)
[ 7.870159] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x07c0 (issued 2052 msec ago)
This not only spams the console output but also induces a delay of a
couple of seconds. To fix this issue, let's not set the HPC bit in
PCI_EXP_SLTCAP register as a part of the post init sequence to not
advertise the hotplug capability for the controller.
Link: https://lore.kernel.org/r/20230619150408.8468-6-manivannan.sadhasivam@linaro.org
Tested-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
SoCs making use of Qcom PCIe controller IPs v2.7.0 and v1.9.0 do not
support hotplug functionality. But the hotplug capability bit is set by
default in the hardware. This causes the kernel PCI core to register
hotplug service for the controller and send hotplug commands to it. But
those commands will timeout generating messages as below during boot and
suspend/resume.
[ 5.782159] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2020 msec ago)
[ 5.810161] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2048 msec ago)
[ 7.838162] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x07c0 (issued 2020 msec ago)
[ 7.870159] pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x07c0 (issued 2052 msec ago)
This not only spams the console output but also induces a delay of a
couple of seconds. To fix this issue, let's clear the HPC bit in
PCI_EXP_SLTCAP register as a part of the post init sequence to not
advertise the hotplug capability for the controller.
Link: https://lore.kernel.org/r/20230619150408.8468-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In the post init sequence of v2.9.0, write access to read only registers
are not disabled after updating the registers. Fix it by disabling the
access after register update.
While at it, let's also add a newline after existing dw_pcie_dbi_ro_wr_en()
guard function to align with rest of the driver.
Link: https://lore.kernel.org/r/20230619150408.8468-4-manivannan.sadhasivam@linaro.org
Fixes: 0cf7c2efe8 ("PCI: qcom: Add IPQ60xx support")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
DWC core already exposes dw_pcie_dbi_ro_wr_{en/dis} helper APIs for
enabling and disabling the write access to read only DBI registers. So
let's use them instead of doing it manually.
Also, the existing code doesn't disable the write access when it's done.
This is also fixed now.
Link: https://lore.kernel.org/r/20230619150408.8468-3-manivannan.sadhasivam@linaro.org
Fixes: 5d76117f07 ("PCI: qcom: Add support for IPQ8074 PCIe controller")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In the post init sequence of v2.9.0, write access to read only registers
are not disabled after updating the registers. Fix it by disabling the
access after register update.
Link: https://lore.kernel.org/r/20230619150408.8468-2-manivannan.sadhasivam@linaro.org
Fixes: 5d76117f07 ("PCI: qcom: Add support for IPQ8074 PCIe controller")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: <stable@vger.kernel.org>
The imx6 PCI host controller suffers from a HW integration bug whereby
the MSI enable bit in the root port MSI capability enables/disables MSIs
interrupts for all downstream components in the PCI tree.
This requires, as implemented in
75cb8d20c1 ("PCI: imx: Enable MSI from downstream components")
that the root port MSI enable bit should be set in order for downstream
PCI devices MSIs to function.
The MSI enable bit programming might be lost during the suspend and
should be re-stored during resume.
Save the MSI control during suspend and restore it in resume.
Link: https://lore.kernel.org/r/1670479534-22154-1-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[lpieralisi@kernel.org: commit log]
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
In the case of fast device addition/removal, it's possible that
hv_eject_device_work() can start to run before create_root_hv_pci_bus()
starts to run; as a result, the pci_get_domain_bus_and_slot() in
hv_eject_device_work() can return a 'pdev' of NULL, and
hv_eject_device_work() can remove the 'hpdev', and immediately send a
message PCI_EJECTION_COMPLETE to the host, and the host immediately
unassigns the PCI device from the guest; meanwhile,
create_root_hv_pci_bus() and the PCI device driver can be probing the
dead PCI device and reporting timeout errors.
Fix the issue by adding a per-bus mutex 'state_lock' and grabbing the
mutex before powering on the PCI bus in hv_pci_enter_d0(): when
hv_eject_device_work() starts to run, it's able to find the 'pdev' and call
pci_stop_and_remove_bus_device(pdev): if the PCI device driver has
loaded, the PCI device driver's probe() function is already called in
create_root_hv_pci_bus() -> pci_bus_add_devices(), and now
hv_eject_device_work() -> pci_stop_and_remove_bus_device() is able
to call the PCI device driver's remove() function and remove the device
reliably; if the PCI device driver hasn't loaded yet, the function call
hv_eject_device_work() -> pci_stop_and_remove_bus_device() is able to
remove the PCI device reliably and the PCI device driver's probe()
function won't be called; if the PCI device driver's probe() is already
running (e.g., systemd-udev is loading the PCI device driver), it must
be holding the per-device lock, and after the probe() finishes and releases
the lock, hv_eject_device_work() -> pci_stop_and_remove_bus_device() is
able to proceed to remove the device reliably.
Fixes: 4daace0d8c ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230615044451.5580-6-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
This reverts commit d6af2ed29c.
The statement "the hv_pci_bus_exit() call releases structures of all its
child devices" in commit d6af2ed29c is not true: in the path
hv_pci_probe() -> hv_pci_enter_d0() -> hv_pci_bus_exit(hdev, true): the
parameter "keep_devs" is true, so hv_pci_bus_exit() does *not* release the
child "struct hv_pci_dev *hpdev" that is created earlier in
pci_devices_present_work() -> new_pcichild_device().
The commit d6af2ed29c was originally made in July 2020 for RHEL 7.7,
where the old version of hv_pci_bus_exit() was used; when the commit was
rebased and merged into the upstream, people didn't notice that it's
not really necessary. The commit itself doesn't cause any issue, but it
makes hv_pci_probe() more complicated. Revert it to facilitate some
upcoming changes to hv_pci_probe().
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Wei Hu <weh@microsoft.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230615044451.5580-5-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The hpdev->state is never really useful. The only use in
hv_pci_eject_device() and hv_eject_device_work() is not really necessary.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230615044451.5580-4-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
When the host tries to remove a PCI device, the host first sends a
PCI_EJECT message to the guest, and the guest is supposed to gracefully
remove the PCI device and send a PCI_EJECTION_COMPLETE message to the host;
the host then sends a VMBus message CHANNELMSG_RESCIND_CHANNELOFFER to
the guest (when the guest receives this message, the device is already
unassigned from the guest) and the guest can do some final cleanup work;
if the guest fails to respond to the PCI_EJECT message within one minute,
the host sends the VMBus message CHANNELMSG_RESCIND_CHANNELOFFER and
removes the PCI device forcibly.
In the case of fast device addition/removal, it's possible that the PCI
device driver is still configuring MSI-X interrupts when the guest receives
the PCI_EJECT message; the channel callback calls hv_pci_eject_device(),
which sets hpdev->state to hv_pcichild_ejecting, and schedules a work
hv_eject_device_work(); if the PCI device driver is calling
pci_alloc_irq_vectors() -> ... -> hv_compose_msi_msg(), we can break the
while loop in hv_compose_msi_msg() due to the updated hpdev->state, and
leave data->chip_data with its default value of NULL; later, when the PCI
device driver calls request_irq() -> ... -> hv_irq_unmask(), the guest
crashes in hv_arch_irq_unmask() due to data->chip_data being NULL.
Fix the issue by not testing hpdev->state in the while loop: when the
guest receives PCI_EJECT, the device is still assigned to the guest, and
the guest has one minute to finish the device removal gracefully. We don't
really need to (and we should not) test hpdev->state in the loop.
Fixes: de0aa7b2f9 ("PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230615044451.5580-3-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Since day 1 of the driver, there has been a race between
hv_pci_query_relations() and survey_child_resources(): during fast
device hotplug, hv_pci_query_relations() may error out due to
device-remove and the stack variable 'comp' is no longer valid;
however, pci_devices_present_work() -> survey_child_resources() ->
complete() may be running on another CPU and accessing the no-longer-valid
'comp'. Fix the race by flushing the workqueue before we exit from
hv_pci_query_relations().
Fixes: 4daace0d8c ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230615044451.5580-2-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
After the L1 link state transition exception handler rework, the static
copies of the remapped PCIe controller address and the PCIe device
pointer became unused. Remove them.
Link: https://lore.kernel.org/r/f29a8c37bd906dfbe23208cc2b089da17e339a75.1684857051.git.geert+renesas@glider.be
Fixes: 6e36203bc1 ("PCI: rcar: Use PCI_SET_ERROR_RESPONSE after read which triggered an exception")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Smatch reported:
1. drivers/pci/controller/pci-ftpci100.c:526 faraday_pci_probe() warn:
'clk' from clk_prepare_enable() not released on lines: 442,451,462,478,512,517.
2. drivers/pci/controller/pci-ftpci100.c:526 faraday_pci_probe() warn:
'p->bus_clk' from clk_prepare_enable() not released on lines: 451,462,478,512,517.
The clock resource is obtained by devm_clk_get(), and then
clk_prepare_enable() makes the clock resource ready for use. After that,
clk_disable_unprepare() should be called to release the clock resource
when it is no longer needed. However, while doing some error handling
in faraday_pci_probe(), clk_disable_unprepare() is not called to release
clk and p->bus_clk before returning. These return lines are exactly 442,
451, 462, 478, 512, 517.
Fix this warning by replacing devm_clk_get() with devm_clk_get_enabled(),
which is equivalent to devm_clk_get() + clk_prepare_enable(). And with
devm_clk_get_enabled(), the clock will automatically be disabled,
unprepared and freed when the device is unbound from the bus.
Link: https://lore.kernel.org/r/20230508043641.23807-1-yejunyan@hust.edu.cn
Fixes: b3c433efb8 ("PCI: faraday: Fix wrong pointer passed to PTR_ERR()")
Fixes: 2eeb02b285 ("PCI: faraday: Add clock handling")
Fixes: 783a862563 ("PCI: faraday: Use pci_parse_request_of_pci_ranges()")
Fixes: d3c68e0a7e ("PCI: faraday: Add Faraday Technology FTPCI100 PCI Host Bridge driver")
Fixes: f1e8bd21e3 ("PCI: faraday: Convert IRQ masking to raw PCI config accessors")
Signed-off-by: Junyan Ye <yejunyan@hust.edu.cn>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
In dw_pcie_host_init() regardless of whether the link has been
started or not, the code waits for the link to come up. Even in
cases where start_link() is not defined the code ends up spinning
in a loop for 1 second. Since in some systems dw_pcie_host_init()
gets called during probe, this one second loop for each pcie
interface instance ends up extending the boot time.
Wait for the link up in only if the start_link() is defined.
Link: https://lore.kernel.org/r/20230412093425.3659088-1-ajayagarwal@google.com
Tested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Sajid Dalvi <sdalvi@google.com>
Signed-off-by: Ajay Agarwal <ajayagarwal@google.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
The dw_edma_core_ops structure contains a set of the operations:
device IRQ numbers getter, CPU/PCI address translation. Based on the
functions semantics the structure name "dw_edma_plat_ops" looks more
descriptive since indeed the operations are platform-specific. The
"dw_edma_core_ops" name shall be used for a structure with the IP-core
specific set of callbacks in order to abstract out DW eDMA and DW HDMA
setups. Such structure will be added in one of the next commit in the
framework of the set of changes adding the DW HDMA device support.
Anyway the renaming was necessary to distinguish two types of
the implementation callbacks:
1. DW eDMA/hDMA IP-core specific operations: device-specific CSR
setups in one or another aspect of the DMA-engine initialization.
2. DW eDMA/hDMA platform specific operations: the DMA device
environment configs like IRQs, address translation, etc.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20230520050854.73160-2-cai.huoqing@linux.dev
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support to request DRAM bandwidth (BW) with Memory Interconnect
in Tegra234 SoC. The DRAM BW required for different modes depends on
the link speed (Gen-1/2/3/4) and width/lanes (x1/x2/x4/x8).
Currently, the DRAM frequency is always set to the maximum available
but that results in the highest power consumption.
The Memory Interconnect is a software feature which uses Interconnect
framework (ICC). It adds the capability for Memory Controller (MC)
clients to request bandwidth and therefore scale DRAM frequency
dynamically depending on the required link speed so that the DRAM
energy consumption can be optimized.
Suggested-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add check to fix the possible array out of bounds violation by
making speed equal to GEN1_CORE_CLK_FREQ when its value is more
than the size of "pcie_gen_freq" array. This array has size of
four but possible speed (CLS) values are from "0 to 0xF". So,
"speed - 1" values are "-1 to 0xE".
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Link: https://lore.kernel.org/lkml/72b9168b-d4d6-4312-32ea-69358df2f2d0@nvidia.com/
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
VMD driver can disable or enable MSI remapping by changing
VMCONFIG_MSI_REMAP register. This register needs to be set to the
default value during soft reboots. Drives failed to enumerate
when Windows boots after performing a soft reboot from Linux.
Windows doesn't support MSI remapping disable feature and stale
register value hinders Windows VMD driver initialization process.
Adding vmd_shutdown function to make sure to set the VMCONFIG
register to the default value.
Link: https://lore.kernel.org/r/20230224202811.644370-1-nirmal.patel@linux.intel.com
Fixes: ee81ee84f8 ("PCI: vmd: Disable MSI-X remapping when possible")
Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jon Derrick <jonathan.derrick@linux.dev>
The Link Retraining process is initiated to account for the Gen2 defect in
the Cadence PCIe controller in J721E SoC. The errata corresponding to this
is i2085, documented at:
https://www.ti.com/lit/er/sprz455c/sprz455c.pdf
The existing workaround implemented for the errata waits for the Data Link
initialization to complete and assumes that the link retraining process
at the Physical Layer has completed. However, it is possible that the
Physical Layer training might be ongoing as indicated by the
PCI_EXP_LNKSTA_LT bit in the PCI_EXP_LNKSTA register.
Fix the existing workaround, to ensure that the Physical Layer training
has also completed, in addition to the Data Link initialization.
Link: https://lore.kernel.org/r/20230315070800.1615527-1-s-vadapalli@ti.com
Fixes: 4740b969aa ("PCI: cadence: Retrain Link to work around Gen2 training defect")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmRHJSgTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXjSOCAClsmFmyP320yAB74vQer5cSzxbIpFW
3qt/P3D8zABn0UxjjmD8+LTHuyB+72KANU6qQ9No6zdYs8yaA1vGX8j8UglWWHuj
fmaAD4DuZl+V+fmqDgHukgaPlhakmW0m5tJkR+TW3kCgnyrtvSWpXPoxUAe6CLvj
Kb/SPl6ylHRWlIAEZ51gy0Ipqxjvs5vR/h9CWpTmRMuZvxdWUro2Cm82wJgzXPqq
3eLbAzB29kLFEIIUpba9a/rif1yrWgVFlfpuENFZ+HUYuR78wrPB9evhwuPvhXd2
+f+Wk0IXORAJo8h7aaMMIr6bd4Lyn98GPgmS5YSe92HRIqjBvtYs3Dq8
=F6+n
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20230424' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- PCI passthrough for Hyper-V confidential VMs (Michael Kelley)
- Hyper-V VTL mode support (Saurabh Sengar)
- Move panic report initialization code earlier (Long Li)
- Various improvements and bug fixes (Dexuan Cui and Michael Kelley)
* tag 'hyperv-next-signed-20230424' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (22 commits)
PCI: hv: Replace retarget_msi_interrupt_params with hyperv_pcpu_input_arg
Drivers: hv: move panic report code from vmbus to hv early init code
x86/hyperv: VTL support for Hyper-V
Drivers: hv: Kconfig: Add HYPERV_VTL_MODE
x86/hyperv: Make hv_get_nmi_reason public
x86/hyperv: Add VTL specific structs and hypercalls
x86/init: Make get/set_rtc_noop() public
x86/hyperv: Exclude lazy TLB mode CPUs from enlightened TLB flushes
x86/hyperv: Add callback filter to cpumask_to_vpset()
Drivers: hv: vmbus: Remove the per-CPU post_msg_page
clocksource: hyper-v: make sure Invariant-TSC is used if it is available
PCI: hv: Enable PCI pass-thru devices in Confidential VMs
Drivers: hv: Don't remap addresses that are above shared_gpa_boundary
hv_netvsc: Remove second mapping of send and recv buffers
Drivers: hv: vmbus: Remove second way of mapping ring buffers
Drivers: hv: vmbus: Remove second mapping of VMBus monitor pages
swiotlb: Remove bounce buffer remapping for Hyper-V
Driver: VMBus: Add Devicetree support
dt-bindings: bus: Add Hyper-V VMBus
Drivers: hv: vmbus: Convert acpi_device to more generic platform_device
...
-----BEGIN PGP SIGNATURE-----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=HPXl
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Resource management:
- Add pci_dev_for_each_resource() and pci_bus_for_each_resource()
iterators
PCIe native device hotplug:
- Fix AB-BA deadlock between reset_lock and device_lock
Power management:
- Wait longer for devices to become ready after resume (as we do for
reset) to accommodate Intel Titan Ridge xHCI devices
- Extend D3hot delay for NVIDIA HDA controllers to avoid
unrecoverable devices after a bus reset
Error handling:
- Clear PCIe Device Status after EDR since generic error recovery now
only clears it when AER is native
ASPM:
- Work around Chromebook firmware defect that clobbers Capability
list (including ASPM L1 PM Substates Cap) when returning from
D3cold to D0
Freescale i.MX6 PCIe controller driver:
- Install imprecise external abort handler only when DT indicates
PCIe support
Freescale Layerscape PCIe controller driver:
- Add ls1028a endpoint mode support
Qualcomm PCIe controller driver:
- Add SM8550 DT binding and driver support
- Add SDX55 DT binding and driver support
- Use bulk APIs for clocks of IP 1.0.0, 2.3.2, 2.3.3
- Use bulk APIs for reset of IP 2.1.0, 2.3.3, 2.4.0
- Add DT "mhi" register region for supported SoCs
- Expose link transition counts via debugfs to help debug low power
issues
- Support system suspend and resume; reduce interconnect bandwidth
and turn off clock and PHY if there are no active devices
- Enable async probe by default to reduce boot time
Miscellaneous:
- Sort controller Kconfig entries by vendor"
* tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (56 commits)
PCI: xilinx: Drop obsolete dependency on COMPILE_TEST
PCI: mobiveil: Sort Kconfig entries by vendor
PCI: dwc: Sort Kconfig entries by vendor
PCI: Sort controller Kconfig entries by vendor
PCI: Use consistent controller Kconfig menu entry language
PCI: xilinx-nwl: Add 'Xilinx' to Kconfig prompt
PCI: hv: Add 'Microsoft' to Kconfig prompt
PCI: meson: Add 'Amlogic' to Kconfig prompt
PCI: Use of_property_present() for testing DT property presence
PCI/PM: Extend D3hot delay for NVIDIA HDA controllers
dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
PCI: qcom: Add SM8550 PCIe support
dt-bindings: PCI: qcom: Add SM8550 compatible
PCI: qcom: Add support for SDX55 SoC
dt-bindings: PCI: qcom-ep: Fix the unit address used in example
dt-bindings: PCI: qcom: Add SDX55 SoC
dt-bindings: PCI: qcom: Update maintainers entry
PCI: qcom: Enable async probe by default
PCI: qcom: Add support for system suspend and resume
PCI/PM: Drop pci_bridge_wait_for_secondary_bus() timeout parameter
...
4 commits are involved here:
A (2016): commit 0de8ce3ee8 ("PCI: hv: Allocate physically contiguous hypercall params buffer")
B (2017): commit be66b67365 ("PCI: hv: Use page allocation for hbus structure")
C (2019): commit 877b911a5b ("PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer")
D (2018): commit 68bb7bfb79 ("X86/Hyper-V: Enable IPI enlightenments")
Patch D introduced the per-CPU hypercall input page "hyperv_pcpu_input_arg"
in 2018. With patch D, we no longer need the per-Hyper-V-PCI-bus hypercall
input page "hbus->retarget_msi_interrupt_params" that was added in patch A,
and the issue addressed by patch B is no longer an issue, and we can also
get rid of patch C.
The change here is required for PCI device assignment to work for
Confidential VMs (CVMs) running without a paravisor, because otherwise we
would have to call set_memory_decrypted() for
"hbus->retarget_msi_interrupt_params" before calling the hypercall
HVCALL_RETARGET_INTERRUPT.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/r/20230421013025.17152-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Since commit 0166dc11be ("of: make CONFIG_OF user selectable"), it is
possible to test-build any driver which depends on OF on any architecture
by explicitly selecting OF. Therefore depending on COMPILE_TEST as an
alternative is no longer needed.
Link: https://lore.kernel.org/r/20230407190843.529caf19@endymion.delvare
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: "Krzysztof Wilczyński" <kw@linux.com>
Add the "Xilinx" vendor name to the CONFIG_PCIE_XILINX_NWL Kconfig prompt
so it matches other drivers. Rename from "PCIe Core" to "PCIe controller".
Link: https://lore.kernel.org/r/20230418174336.145585-4-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Add the "Microsoft" vendor name to the CONFIG_PCI_HYPERV_INTERFACE Kconfig
prompt so it matches other PCIe drivers and other Hyper-V prompts.
Link: https://lore.kernel.org/r/20230418174336.145585-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Dexuan Cui <decui@microsoft.com>
Add the "Amlogic" vendor name to the CONFIG_PCI_MESON Kconfig prompt to
match other PCIe drivers. Capitalize "Meson" to match other Meson Kconfig
prompts.
Link: https://lore.kernel.org/r/20230418174336.145585-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Yue Wang <yue.wang@Amlogic.com>
- Use correct PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 register for v2.7.0
(Manivannan Sadhasivam)
- Remove "PCIE20_" prefix from register definitions (Manivannan Sadhasivam)
- Sort registers and bitfield declarations (Manivannan Sadhasivam)
- Convert to GENMASK and FIELD_PREP (Manivannan Sadhasivam)
- Use bulk APIs for clocks of IP 1.0.0, 2.3.2, 2.3.3 (Manivannan
Sadhasivam)
- Use bulk APIs for reset of IP 2.1.0, 2.3.3, 2.4.0 (Manivannan Sadhasivam)
- Rename qcom_pcie_config_sid_sm8250() to be non SM8250-specific
(Manivannan Sadhasivam)
- Add DT "mhi" register region for supported SoCs (Manivannan Sadhasivam)
- Expose link transition counts via debugfs to help debug low power issues
(Manivannan Sadhasivam)
- Support system suspend and resume; reduce interconnect bandwidth and turn
off clock and PHY if there are no active devices (Manivannan Sadhasivam)
- Enable async probe by default to reduce boot time (Manivannan Sadhasivam)
- Add Manivannan Sadhasivam as qcom DT binding maintainer, replacing
Stanimir Varbanov (Manivannan Sadhasivam)
- Add DT binding and driver support for Qcom SDX55 SoC (Manivannan
Sadhasivam)
- Add DT binding and driver support for SM8550 SoC (Abel Vesa)
- Document msi-map and msi-map-mask DT properties (Manivannan Sadhasivam)
* pci/controller/qcom:
dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
PCI: qcom: Add SM8550 PCIe support
dt-bindings: PCI: qcom: Add SM8550 compatible
PCI: qcom: Add support for SDX55 SoC
dt-bindings: PCI: qcom-ep: Fix the unit address used in example
dt-bindings: PCI: qcom: Add SDX55 SoC
dt-bindings: PCI: qcom: Update maintainers entry
PCI: qcom: Enable async probe by default
PCI: qcom: Add support for system suspend and resume
PCI: qcom: Expose link transition counts via debugfs
dt-bindings: PCI: qcom: Add "mhi" register region to supported SoCs
PCI: qcom: Rename qcom_pcie_config_sid_sm8250() to reflect IP version
PCI: qcom: Use macros for defining total no. of clocks & supplies
PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.4.0
PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.3.3
PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 2.3.3
PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 2.3.2
PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 1.0.0
PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.1.0
PCI: qcom: Use lower case for hex
PCI: qcom: Add missing macros for register fields
PCI: qcom: Use bitfield definitions for register fields
PCI: qcom: Sort and group registers and bitfield definitions
PCI: qcom: Remove PCIE20_ prefix from register definitions
PCI: qcom: Fix the incorrect register usage in v2.7.0 config
- Use the PCI_CONF1_ADDRESS() macro to simplify config space address
computation (Pali Rohár)
* pci/controller/ixp4xx:
PCI: ixp4xx: Use PCI_CONF1_ADDRESS() macro
- Install i.MX6 PCI abort handler only when DT contains a PCI controller
claimed by the imx6 driver (H. Nikolaus Schaller)
* pci/controller/dwc:
PCI: imx6: Install the fault handler only on compatible match
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property()/of_find_property() functions for reading properties. As
part of this, convert of_get_property()/of_find_property() calls to the
recently added of_property_present() helper when we just want to test for
presence of a property and nothing more.
Link: https://lore.kernel.org/r/20230310144719.1544443-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> # pcie-mediatek
For PCI pass-thru devices in a Confidential VM, Hyper-V requires
that PCI config space be accessed via hypercalls. In normal VMs,
config space accesses are trapped to the Hyper-V host and emulated.
But in a confidential VM, the host can't access guest memory to
decode the instruction for emulation, so an explicit hypercall must
be used.
Add functions to make the new MMIO read and MMIO write hypercalls.
Update the PCI config space access functions to use the hypercalls
when such use is indicated by Hyper-V flags. Also, set the flag to
allow the Hyper-V PCI driver to be loaded and used in a Confidential
VM (a.k.a., "Isolation VM"). The driver has previously been hardened
against a malicious Hyper-V host[1].
[1] https://lore.kernel.org/all/20220511223207.3386-2-parri.andrea@gmail.com/
Co-developed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://lore.kernel.org/r/1679838727-87310-13-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
SM8550 requires two additional clocks for proper working.
Add these two clocks as optional clocks (as only required by this
platform) and compatible for this platform.
While at it, let's also rename the reset variable to "rst" from
"pci_reset" to match the existing naming preference.
Link: https://lore.kernel.org/r/20230320144658.1794991-2-abel.vesa@linaro.org
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
[lpieralisi@kernel.org: commit log rewording]
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Add support for SDX55 SoC reusing the 1.9.0 config. The PCIe controller is
of version 1.10.0 but it is compatible with the 1.9.0 config. This SoC also
requires "sleep" clock which is added as an optional clock in the driver,
since it is not required on other SoCs.
Link: https://lore.kernel.org/r/20230308082424.140224-14-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Qcom PCIe RC driver waits for the PHY link to be up during the probe;
this consumes several milliseconds during boot.
Enable async probe by default so that other drivers can load in parallel
while this driver waits for the link to be up.
Suggested-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230320064644.5217-1-manivannan.sadhasivam@linaro.org
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
During the system suspend, vote for minimal interconnect bandwidth (1KiB)
to keep the interconnect path active for config access and also turn OFF
the resources like clock and PHY if there are no active devices connected
to the controller. For the controllers with active devices, the resources
are kept ON as removing the resources will trigger access violation during
the late end of suspend cycle as kernel tries to access the config space of
PCIe devices to mask the MSIs.
Also, it is not desirable to put the link into L2/L3 state as that
implies VDD supply will be removed and the devices may go into powerdown
state. This will affect the lifetime of storage devices like NVMe.
And finally, during resume, turn ON the resources if the controller was
truly suspended (resources OFF) and update the interconnect bandwidth
based on PCIe Gen speed.
Suggested-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Link: https://lore.kernel.org/r/20230403154922.20704-2-manivannan.sadhasivam@linaro.org
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Dhruva Gole <d-gole@ti.com>
Qualcomm PCIe controllers have debug registers in the MHI region that
count PCIe link transitions. Expose them over debugfs to userspace to
help debug the low power issues.
Note that even though the registers are prefixed as PARF_, they don't
live under the "parf" register region. The register naming is following
the Qualcomm's internal documentation as like other registers.
While at it, let's arrange the local variables in probe function to follow
reverse XMAS tree order.
Link: https://lore.kernel.org/r/20230316081117.14288-20-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
qcom_pcie_config_sid_sm8250() function no longer applies only to SM8250.
So let's rename it to reflect the actual IP version and also move its
definition to keep it sorted as per IP revisions.
Link: https://lore.kernel.org/r/20230316081117.14288-15-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
To keep uniformity, let's use macros to define the total number of clocks
and supplies in qcom_pcie_resources_{2_7_0/2_9_0} structs.
Link: https://lore.kernel.org/r/20230316081117.14288-14-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
All the resets are asserted and deasserted at the same time. So the bulk
reset APIs can be used to handle them together. This simplifies the code
a lot.
It should be noted that there were delays in-between the reset asserts and
deasserts. But going by the config used by other revisions, those delays
are not really necessary. So a single delay after all asserts and one after
deasserts is used.
The total number of resets supported is 12 but only ipq4019 is using all of
them.
Link: https://lore.kernel.org/r/20230316081117.14288-13-manivannan.sadhasivam@linaro.org
Tested-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
All the resets are asserted and deasserted at the same time. So the bulk
reset APIs can be used to handle them together. This simplifies the code
a lot.
Link: https://lore.kernel.org/r/20230316081117.14288-12-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
All the clocks are enabled and disabled at the same time. So the bulk clock
APIs can be used to handle them together. This simplifies the code a lot.
Link: https://lore.kernel.org/r/20230316081117.14288-11-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
All the clocks are enabled and disabled at the same time. So the bulk clock
APIs can be used to handle them together. This simplifies the code a lot.
Link: https://lore.kernel.org/r/20230316081117.14288-10-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
All the clocks are enabled and disabled at the same time. So the bulk clock
APIs can be used to handle them together. This simplifies the code a lot.
Link: https://lore.kernel.org/r/20230316081117.14288-9-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
All the resets are asserted and deasserted at the same time. So the bulk
reset APIs can be used to handle them together. This simplifies the code
a lot.
While at it, let's also move the qcom_pcie_resources_2_1_0 struct below
qcom_pcie_resources_1_0_0 to keep it sorted.
Link: https://lore.kernel.org/r/20230316081117.14288-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Some of the registers are changed using hardcoded bitfields without macros.
This provides no information on what the register setting is about. So add
the macros to those fields for making the code more understandable.
Link: https://lore.kernel.org/r/20230316081117.14288-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
To maintain uniformity throughout the driver and also to make the code
easier to read, let's make use of bitfield definitions for register fields.
Link: https://lore.kernel.org/r/20230316081117.14288-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Sorting the registers and their bit definitions will make it easier to add
more definitions in the future and it also helps in maintenance.
While at it, let's also group the registers and bit definitions separately
as done in the pcie-qcom-ep driver.
Link: https://lore.kernel.org/r/20230316081117.14288-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
The PCIE part is redundant and 20 doesn't represent anything across the
SoCs supported now. So let's get rid of the prefix.
This involves adding the IP version suffix to one definition of
PARF_SLV_ADDR_SPACE_SIZE that defines offset specific to that version.
The other definition is generic for the rest of the versions.
Also, the register PCIE20_LNK_CONTROL2_LINK_STATUS2 is not used anywhere,
hence removed.
Link: https://lore.kernel.org/r/20230316081117.14288-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Qcom PCIe IP version v2.7.0 and its derivatives don't contain the
PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT register. Instead, they have the new
PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 register. So fix the incorrect
register usage which is modifying a different register.
Also in this IP version, this register change doesn't depend on MSI
being enabled. So remove that check also.
Link: https://lore.kernel.org/r/20230316081117.14288-2-manivannan.sadhasivam@linaro.org
Fixes: ed8cc3b1fc ("PCI: qcom: Add support for SDM845 PCIe controller")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: <stable@vger.kernel.org> # 5.6+
When there is no card plugged on a PCIe port a log reporting that
the port will be disabled is flagged as an error (dev_err()).
Since this is not an error at all, change the log level by using
dev_info() instead.
Link: https://lore.kernel.org/r/20230324073733.1596231-1-sergio.paracuellos@gmail.com
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
commit bb38919ec5 ("PCI: imx6: Add support for i.MX6 PCIe controller")
added a fault hook to this driver in the probe function. So it was only
installed if needed.
commit bde4a5a00e ("PCI: imx6: Allow probe deferral by reset GPIO")
moved it from probe to driver init which installs the hook unconditionally
as soon as the driver is compiled into a kernel.
When this driver is compiled as a module, the hook is not registered
until after the driver has been matched with a .compatible and
loaded.
commit 415b6185c5 ("PCI: imx6: Fix config read timeout handling")
extended the fault handling code.
commit 2d8ed461db ("PCI: imx6: Add support for i.MX8MQ")
added some protection for non-ARM architectures, but this does not
protect non-i.MX ARM architectures.
Since fault handlers can be triggered on any architecture for different
reasons, there is no guarantee that they will be triggered only for the
assumed situation, leading to improper error handling (i.MX6-specific
imx6q_pcie_abort_handler) on foreign systems.
I had seen strange L3 imprecise external abort messages several times on
OMAP4 and OMAP5 devices and couldn't make sense of them until I realized
they were related to this unused imx6q driver because I had
CONFIG_PCI_IMX6=y.
Note that CONFIG_PCI_IMX6=y is useful for kernel binaries that are designed
to run on different ARM SoC and be differentiated only by device tree
binaries. So turning off CONFIG_PCI_IMX6 is not a solution.
Therefore we check the compatible in the init function before registering
the fault handler.
Link: https://lore.kernel.org/r/e1bcfc3078c82b53aa9b78077a89955abe4ea009.1678380991.git.hns@goldelico.com
Fixes: bde4a5a00e ("PCI: imx6: Allow probe deferral by reset GPIO")
Fixes: 415b6185c5 ("PCI: imx6: Fix config read timeout handling")
Fixes: 2d8ed461db ("PCI: imx6: Add support for i.MX8MQ")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
If CDM_CHECK is enabled (by the DT "snps,enable-cdm-check" property), 'val'
is overwritten by PCIE_PL_CHK_REG_CONTROL_STATUS initialization. Commit
ec7b952f45 ("PCI: dwc: Always enable CDM check if "snps,enable-cdm-check"
exists") did not account for further usage of 'val', so we wrote improper
values to PCIE_PORT_LINK_CONTROL when the CDM check is enabled.
Move the PCIE_PORT_LINK_CONTROL update to be completely after the
PCIE_PL_CHK_REG_CONTROL_STATUS register initialization.
[bhelgaas: commit log adapted from Serge's version]
Fixes: ec7b952f45 ("PCI: dwc: Always enable CDM check if "snps,enable-cdm-check" exists")
Link: https://lore.kernel.org/r/20230310123510.675685-2-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Add PCIe EP mode support for ls1028a.
Link: https://lore.kernel.org/r/20230209151050.233973-1-Frank.Li@nxp.com
Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Acked-by: Roy Zang <Roy.Zang@nxp.com>
Defines prefixed with "CONFIG" should be limited to proper Kconfig options,
that are introduced in a Kconfig file.
In the R-car driver the bitmask to configure the SEND_ENABLE mode is named
CONFIG_SEND_ENABLE.
Rename this local definition to a more suitable name, containing the
register bitfield name defined in the R-Car Gen3 rev. 2.30 user
manual.
No functional change.
Link: https://lore.kernel.org/r/20230113084516.31888-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
[lpieralisi@kernel.org: Changed define naming and commit log]
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
pcie-kirin uses regmaps, and needs to pull them in; otherwise, with
CONFIG_PCIE_KIRIN=y and without CONFIG_REGMAP_MMIO pcie-kirin produces
a linker failure looking for __devm_regmap_init_mmio_clk().
Fixes: d19afe7be1 ("PCI: kirin: Use regmap for APB registers")
Link: https://lore.kernel.org/r/04636141da1d6d592174eefb56760511468d035d.1668410580.git.josh@joshtriplett.org
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
[lpieralisi@kernel.org: commit log and removed REGMAP select]
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org # 5.16+
- Core support
- New devm_of_phy_optional_get() API with users and conversion
- New support:
- Mediatek MT7986 tphy support
- Qualcomm SM8550 UFS, PCIe, combo phy support, SM6115 / SM4250
USB3 phy support, SM6350 combo phy support, SM6125 UFS PHY
support amd SM8350 & SM8450 combo phy support
- Qualcomm SNPS eUSB2 eUSB2 repeater drivers
- Allwinner F1C100s USB PHY support
- Tegra xusb support for Tegra234
- Updates:
- Yaml conversion for Qualcomm pcie2 phy and usb-hsic-phy
- G4 mode support in Qualcomm UFS phy and support for various SoCs
- Yaml conversion for Meson usb2 phy
- TI Type C support for usb phy for j721
- Yaml conversion for Tegra xusb binding
-----BEGIN PGP SIGNATURE-----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=2g27
-----END PGP SIGNATURE-----
Merge tag 'phy-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"This features a bunch of new device support, a couple of new drivers,
yaml conversion and updates of a few drivers.
Core support:
- New devm_of_phy_optional_get() API with users and conversion
New hardware support:
- Mediatek MT7986 phy support
- Qualcomm SM8550 UFS, PCIe, combo phy support, SM6115 / SM4250 USB3
phy support, SM6350 combo phy support, SM6125 UFS PHY support amd
SM8350 & SM8450 combo phy support
- Qualcomm SNPS eUSB2 eUSB2 repeater drivers
- Allwinner F1C100s USB PHY support
- Tegra xusb support for Tegra234
Updates:
- Yaml conversion for Qualcomm pcie2 phy and usb-hsic-phy
- G4 mode support in Qualcomm UFS phy and support for various SoCs
- Yaml conversion for Meson usb2 phy
- TI Type C support for usb phy for j721
- Yaml conversion for Tegra xusb binding"
* tag 'phy-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (106 commits)
phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeater
phy: qcom: Add QCOM SNPS eUSB2 repeater driver
dt-bindings: phy: qcom,snps-eusb2-phy: Add phys property for the repeater
dt-bindings: phy: Add qcom,snps-eusb2-repeater schema file
dt-bindings: phy: amlogic,g12a-usb3-pcie-phy: add missing optional phy-supply property
phy: rockchip-typec: Fix unsigned comparison with less than zero
phy: rockchip-typec: fix tcphy_get_mode error case
phy: qcom: snps-eusb2: Add missing headers
phy: qcom-qmp-combo: Add support for SM8550
phy: qcom-qmp: Add v6 DP register offsets
phy: qcom-qmp: pcs-usb: Add v6 register offsets
dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Document SM8550 compatible
phy: qcom: Add QCOM SNPS eUSB2 driver
dt-bindings: phy: Add qcom,snps-eusb2-phy schema file
phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs
phy: qcom-qmp: qserdes-lane-shared: Add v6 register offsets
phy: qcom-qmp: qserdes-txrx: Add v6.20 register offsets
phy: qcom-qmp: pcs-pcie: Add v6.20 register offsets
phy: qcom-qmp: pcs-pcie: Add v6 register offsets
phy: qcom-qmp: pcs: Add v6.20 register offsets
...
-----BEGIN PGP SIGNATURE-----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=/y4d
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Rework portdrv shutdown so it disables interrupts but doesn't
disable bus mastering, which leads to hangs on Loongson LS7A
- Add mechanism to prevent Max_Read_Request_Size (MRRS) increases,
again to avoid hardware issues on Loongson LS7A (and likely other
devices based on DesignWare IP)
- Ignore devices with a firmware (DT or ACPI) node that says the
device is disabled
Resource management:
- Distribute spare resources to unconfigured hotplug bridges at
boot-time (not just when hot-adding such a bridge), which makes
hot-adding devices to docks work better. Tried this in v6.1 but had
to revert for regressions, so try again
- Fix root bus issue that dropped resources that happened to end
at 0, e.g., [bus 00]
PCI device hotplug:
- Remove device locking when marking device as disconnected so this
doesn't have to wait for concurrent driver bind/unbind to complete
- Quirk more Qualcomm bridges that don't fully implement the PCIe
Slot Status 'Command Completed' bit
Power management:
- Account for _S0W of the target bridge in acpi_pci_bridge_d3() so we
don't miss hot-add notifications for USB4 docks, Thunderbolt, etc
Reset:
- Observe delay after reset, e.g., resuming from system sleep,
regardless of whether a bridge can suspend to D3cold at runtime
- Wait for secondary bus to become ready after a bridge reset
Virtualization:
- Avoid FLR on some AMD FCH AHCI adapters where it doesn't work
- Allow independent IOMMU groups for some Wangxun NICs that prevent
peer-to-peer transactions but don't advertise an ACS Capability
Error handling:
- Configure End-to-End-CRC (ECRC) only if Linux owns the AER
Capability
- Remove redundant Device Control Error Reporting Enable in the AER
service driver since this is already done for all devices during
enumeration
ASPM:
- Add pci_enable_link_state() interface to allow drivers to enable
ASPM link state
Endpoint framework:
- Move dra7xx and tegra194 linkup processing from hard IRQ to
threaded IRQ handler
- Add a separate lock for endpoint controller list of endpoint
function drivers to prevent deadlock in callbacks
- Pass events from endpoint controller to endpoint function drivers
via callbacks instead of notifiers
Synopsys DesignWare eDMA controller driver (acked by Vinod):
- Fix CPU vs PCI address issues
- Fix source vs destination address issues
- Fix issues with interleaved transfer semantics
- Fix channel count initialization issue (issue still exists in
several other drivers)
- Clean up and improve debugfs usage so it will work on platforms
with several eDMA devices
Baikal T-1 PCIe controller driver:
- Set a 64-bit DMA mask
Freescale i.MX6 PCIe controller driver:
- Add i.MX8MM, i.MX8MQ, i.MX8MP endpoint mode DT binding and driver
support
Intel VMD host bridge driver:
- Add quirk to configure PCIe ASPM and LTR. This is normally done by
BIOS, and will be for future products
Marvell MVEBU PCIe controller driver:
- Mark this driver as broken in Kconfig since bugs prevent its daily
usage
MediaTek MT7621 PCIe controller driver:
- Delay PHY port initialization to improve boot reliability for ZBT
WE1326, ZBT WF3526-P, and some Netgear models
Qualcomm PCIe controller driver:
- Add MSM8998 DT compatible string
- Unify MSM8996 and MSM8998 clock orderings
- Add SM8350 DT binding and driver support
- Add IPQ8074 Gen3 DT binding and driver support
- Correct qcom,perst-regs in DT binding
- Add qcom_pcie_host_deinit() so the PHY is powered off and
regulators and clocks are disabled on late host-init errors
Socionext UniPhier Pro5 controller driver:
- Clean up uniphier-ep reg, clocks, resets, and their names in DT
binding
Synopsys DesignWare PCIe controller driver:
- Restrict coherent DMA mask to 32 bits for MSI, but allow controller
drivers to set 64-bit streaming DMA mask
- Add eDMA engine support in both Root Port and Endpoint controllers
Miscellaneous:
- Remove MODULE_LICENSE from boolean drivers so they don't look like
modules so modprobe can complain about them"
* tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (86 commits)
PCI: dwc: Add Root Port and Endpoint controller eDMA engine support
PCI: bt1: Set 64-bit DMA mask
PCI: dwc: Restrict only coherent DMA mask for MSI address allocation
dmaengine: dw-edma: Prepare dw_edma_probe() for builtin callers
dmaengine: dw-edma: Depend on DW_EDMA instead of selecting it
dmaengine: dw-edma: Add mem-mapped LL-entries support
PCI: Remove MODULE_LICENSE so boolean drivers don't look like modules
PCI: hv: Drop duplicate PCI_MSI dependency
PCI/P2PDMA: Annotate RCU dereference
PCI/sysfs: Constify struct kobj_type pci_slot_ktype
PCI: hotplug: Allow marking devices as disconnected during bind/unbind
PCI: pciehp: Add Qualcomm quirk for Command Completed erratum
PCI: qcom: Add IPQ8074 Gen3 port support
dt-bindings: PCI: qcom: Add IPQ8074 Gen3 port
dt-bindings: PCI: qcom: Sort compatibles alphabetically
PCI: qcom: Fix host-init error handling
PCI: qcom: Add SM8350 support
dt-bindings: PCI: qcom: Add SM8350
dt-bindings: PCI: qcom-ep: Correct qcom,perst-regs
dt-bindings: PCI: qcom: Unify MSM8996 and MSM8998 clock order
...
- Add pci_enable_link_state() to allow drivers to enable ASPM link state
(Michael Bottini)
- Add quirk to enable all ASPM link states and program LTR for devices
below VMD (David E. Box)
* pci/controller/vmd:
PCI: vmd: Add quirk to configure PCIe ASPM and LTR
PCI: vmd: Create feature grouping for client products
PCI: vmd: Use PCI_VDEVICE in device list
PCI/ASPM: Add pci_enable_link_state()
- Delay PHY initialization to make boots reliable for ZBT WE1326 and ZBT
WF3526-P and some Netgear models (Sergio Paracuellos)
* pci/controller/mt7621:
PCI: mt7621: Delay phy ports initialization
- Release previously-requested DW eDMA IRQs if request_irq() fails (Serge
Semin)
- Convert DW eDMA linked-list (ll) and data target (dt) from CPU-relative
addresses to PCI bus addresses (Serge Semin)
- Fix missing src/dst address for interleaved transfers (Serge Semin)
- Enforce the DW eDMA restriction that interleaved transfers must increment
src and dst addresses (Serge Semin)
- Fix some invalid interleaved transfer semantics (Serge Semin)
- Convert CPU-relative addresses to PCI bus addresses for eDMA engine
(Serge Semin)
- Drop chancnt initialization from dw-edma-core, since it is managed by the
dmaengine core, e.g., in dma_async_device_channel_register() (Serge Semin)
- Clean up bogus casting of debugfs_entries.reg addresses (Serge Semin)
- Ignore debugfs file/directory creation errors (Serge Semin)
- Allocate debugfs entries from the heap to prepare for multi-eDMA
platforms (Serge Semin)
- Simplify and rework register accessors to remove another obstacle to
multi-eDMA platforms (Serge Semin)
- Consolidate eDMA read/write channels in a single dma_device to simplify,
better reflect the hardware design, and avoid a debugfs complaint (Serge
Semin)
- Move eDMA-specific debugfs nodes into existing dmaengine subdirectory
(Serge Semin)
- Fix a readq_ch() truncation from 64 to 32 bits (Serge Semin)
- Use existing readq()/writeq rather than hand-coding new ones (Serge
Semin)
- Drop unnecessary data target region allocation in favor of existing
dw_edma_chip members (Serge Semin)
- Use parent device in eDMA controller name to prepare for multi-eDMA
platforms (Serge Semin)
- In addition to the existing MMIO accessors for linked list entries, add
support for ioremapped entries for use by eDMA in Root Ports or local
Endpoints (Serge Semin)
- Convert DW_EDMA_PCIE so it depends on DW_EDMA instead of selecting it
(Serge Semin)
- Allow DWC drivers to set streaming DMA masks larger than 32 bits;
previously both streaming and coherent DMA were limited to 32 bits
because some PCI devices only support coherent 32-bit DMA for MSI (Serge
Semin)
- Set 64-bit streaming and coherent DMA mask for the bt1 driver (Serge
Semin)
- Add DW Root Port and Endpoint controller support for eDMA (Serge Semin)
* pci/controller/dwc:
PCI: dwc: Add Root Port and Endpoint controller eDMA engine support
PCI: bt1: Set 64-bit DMA mask
PCI: dwc: Restrict only coherent DMA mask for MSI address allocation
dmaengine: dw-edma: Prepare dw_edma_probe() for builtin callers
dmaengine: dw-edma: Depend on DW_EDMA instead of selecting it
dmaengine: dw-edma: Add mem-mapped LL-entries support
dmaengine: dw-edma: Skip cleanup procedure if no private data found
dmaengine: dw-edma: Replace chip ID number with device name
dmaengine: dw-edma: Drop DT-region allocation
dmaengine: dw-edma: Use non-atomic io-64 methods
dmaengine: dw-edma: Fix readq_ch() return value truncation
dmaengine: dw-edma: Use DMA engine device debugfs subdirectory
dmaengine: dw-edma: Join read/write channels into a single device
dmaengine: dw-edma: Move eDMA data pointer to debugfs node descriptor
dmaengine: dw-edma: Simplify debugfs context CSRs init procedure
dmaengine: dw-edma: Rename debugfs dentry variables to 'dent'
dmaengine: dw-edma: Convert debugfs descs to being heap-allocated
dmaengine: dw-edma: Add dw_edma prefix to debugfs nodes descriptor
dmaengine: dw-edma: Stop checking debugfs_create_*() return value
dmaengine: dw-edma: Drop unnecessary debugfs reg casts
dmaengine: dw-edma: Drop chancnt initialization
dmaengine: dw-edma: Add PCI bus address getter to the remote EP glue driver
dmaengine: dw-edma: Add CPU to PCI bus address translation
dmaengine: dw-edma: Fix invalid interleaved xfers semantics
dmaengine: dw-edma: Don't permit non-inc interleaved xfers
dmaengine: dw-edma: Fix missing src/dst address of interleaved xfers
dmaengine: dw-edma: Convert ll/dt phys address to PCI bus/DMA address
dmaengine: dw-edma: Release requested IRQs on failure
dmaengine: Fix dma_slave_config.dst_addr description
- Convert dra7xx to threaded IRQ handler (Manivannan Sadhasivam)
- Move tegra194 dw_pcie_ep_linkup() to threaded IRQ handler (Manivannan
Sadhasivam)
- Add a separate lock for the endpoint pci_epf list to avoid deadlock
while running callbacks (Manivannan Sadhasivam)
- Use callbacks instead of notifier chains to signal events from EPC to EPF
drivers (Manivannan Sadhasivam)
- Use link_up() callback in place of LINK_UP notifier (Manivannan
Sadhasivam)
* pci/endpoint:
PCI: endpoint: Use link_up() callback in place of LINK_UP notifier
PCI: endpoint: Use callback mechanism for passing events from EPC to EPF
PCI: endpoint: Use a separate lock for protecting epc->pci_epf list
PCI: tegra194: Move dw_pcie_ep_linkup() to threaded IRQ handler
PCI: dra7xx: Use threaded IRQ handler for "dra7xx-pcie-main" IRQ
- Remove MODULE_LICENSE from boolean drivers so they don't look like
modules so modprobe will complain about them (Nick Alcock)
* pci/kbuild:
PCI: Remove MODULE_LICENSE so boolean drivers don't look like modules
Since the DW eDMA core now supports eDMA controllers embedded in locally
accessible DW PCIe Root Ports and Endpoints, register these controllers
when possible.
To do that the DW PCIe core driver needs to perform some preparations
first. First of all, it needs to find the eDMA controller CSRs base
address, whether they are accessible over the Port Logic or iATU unrolled
space. Afterwards it can try to auto-detect the eDMA controller
availability and number of read/write channels. If none are found the
procedure silently returns without error.
Secondly, the platform is supposed to provide either combined or
per-channel IRQ signals. If no valid IRQs set is found, the procedure
returns without error to be backward compatible with platforms where DW
PCIe controllers have eDMA but lack the IRQ description.
Finally, before actually probing the eDMA device we need to allocate LLP
items buffers. After that the DW eDMA can be registered. If registration is
successful, a message regarding the number of detected Read/Write eDMA
channels will be printed to the system as is done for the iATU settings.
Note: the DW PCI controller driver (either host or endpoint mode) is
currently always built-in, so if the DW eDMA core is built as a module
(CONFIG_DW_EDMA=m), eDMA controllers will not be registered even if the
dw-edma module is later loaded.
Link: https://lore.kernel.org/r/20230113171409.30470-28-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
The DW PCIe Root Port IP core is synthesized with the 64-bit AXI address
bus. Since the device is also equipped with the eDMA engine, explicitly
set the device DMA mask so DMA engine clients can allocate data buffers
anywhere in the 64-bit memory space.
Link: https://lore.kernel.org/r/20230113171409.30470-27-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The MSI target address must be in the lowest 4GB memory to support PCI
peripherals without 64-bit MSI support. Since the allocation is done from
DMA coherent memory, set only the coherent DMA mask, leaving the streaming
DMA mask alone.
Thus streaming DMA operations will work with no artificial limitations. It
will be specifically useful for the eDMA-capable controllers so the
corresponding DMA engine clients would map the DMA buffers with no need for
SWIOTLB for buffers allocated above 4GB.
Add a brief comment about the reason allocating the MSI target address
below 4GB.
Link: https://lore.kernel.org/r/20230113171409.30470-26-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmPzgDgTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXrc7CACfG4SSd8KkWU/y8Q66Irxdau0a3ETD
KL4UNRKGIyKujufgFsme79O6xVSSsCNSay449wk20hqn8lnwbSRi9pUwmLn29hfd
CMFleWIqgwGFfC1do5DRF1vrt1siuG/jVE07mWsEwuY2iHx/es+H7LiQKidhkndZ
DhXRqoi7VYiJv5fRSumpkUJrMZiI96o9Mk09HUksdMwCn3+7RQEqHnlTH5KOozKF
iMroDB72iNw5Na/USZwWL2EDRptENam3lFkPBeDPqNw0SbG4g65JGPR9DSa0Lkbq
AGCJQkdU33mcYQG5MY7R4K1evufpOl/apqLW7h92j45Znr9ok6Vr2c1R
=J1VT
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20230220' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- allow Linux to run as the nested root partition for Microsoft
Hypervisor (Jinank Jain and Nuno Das Neves)
- clean up the return type of callback functions (Dawei Li)
* tag 'hyperv-next-signed-20230220' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Fix hv_get/set_register for nested bringup
Drivers: hv: Make remove callback of hyperv driver void returned
Drivers: hv: Enable vmbus driver for nested root partition
x86/hyperv: Add an interface to do nested hypercalls
Drivers: hv: Setup synic registers in case of nested root partition
x86/hyperv: Add support for detecting nested hypervisor
This pull request contains the following branches:
doc.2023.01.05a: Documentation updates.
fixes.2023.01.23a: Miscellaneous fixes, perhaps most notably:
o Throttling callback invocation based on the number of callbacks
that are now ready to invoke instead of on the total number
of callbacks.
o Several patches that suppress false-positive boot-time
diagnostics, for example, due to lockdep not yet being
initialized.
o Make expedited RCU CPU stall warnings dump stacks of any tasks
that are blocking the stalled grace period. (Normal RCU CPU
stall warnings have doen this for mnay years.)
o Lazy-callback fixes to avoid delays during boot, suspend, and
resume. (Note that lazy callbacks must be explicitly enabled,
so this should not (yet) affect production use cases.)
kvfree.2023.01.03a: Cause kfree_rcu() and friends to take advantage of
polled grace periods, thus reducing memory footprint by almost
two orders of magnitude, admittedly on a microbenchmark.
This series also begins the transition from kfree_rcu(p) to
kfree_rcu_mightsleep(p). This transition was motivated by bugs
where kfree_rcu(p), which can block, was typed instead of the
intended kfree_rcu(p, rh).
srcu.2023.01.03a: SRCU updates, perhaps most notably fixing a bug that
causes SRCU to fail when booted on a system with a non-zero boot
CPU. This surprising situation actually happens for kdump kernels
on the powerpc architecture. It also adds an srcu_down_read()
and srcu_up_read(), which act like srcu_read_lock() and
srcu_read_unlock(), but allow an SRCU read-side critical section
to be handed off from one task to another.
srcu-always.2023.02.02a: Cleans up the now-useless SRCU Kconfig option.
There are a few more commits that are not yet acked or pulled
into maintainer trees, and these will be in a pull request for
a later merge window.
tasks.2023.01.03a: RCU-tasks updates, perhaps most notably these fixes:
o A strange interaction between PID-namespace unshare and the
RCU-tasks grace period that results in a low-probability but
very real hang.
o A race between an RCU tasks rude grace period on a single-CPU
system and CPU-hotplug addition of the second CPU that can result
in a too-short grace period.
o A race between shrinking RCU tasks down to a single callback list
and queuing a new callback to some other CPU, but where that
queuing is delayed for more than an RCU grace period. This can
result in that callback being stranded on the non-boot CPU.
torture.2023.01.05a: Torture-test updates and fixes.
torturescript.2023.01.03a: Torture-test scripting updates and fixes.
stall.2023.01.09a: Provide additional RCU CPU stall-warning information
in kernels built with CONFIG_RCU_CPU_STALL_CPUTIME=y, and
restore the full five-minute timeout limit for expedited RCU
CPU stall warnings.
-----BEGIN PGP SIGNATURE-----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=bBYK
-----END PGP SIGNATURE-----
Merge tag 'rcu.2023.02.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates
- Miscellaneous fixes, perhaps most notably:
- Throttling callback invocation based on the number of callbacks
that are now ready to invoke instead of on the total number of
callbacks
- Several patches that suppress false-positive boot-time
diagnostics, for example, due to lockdep not yet being
initialized
- Make expedited RCU CPU stall warnings dump stacks of any tasks
that are blocking the stalled grace period. (Normal RCU CPU
stall warnings have done this for many years)
- Lazy-callback fixes to avoid delays during boot, suspend, and
resume. (Note that lazy callbacks must be explicitly enabled, so
this should not (yet) affect production use cases)
- Make kfree_rcu() and friends take advantage of polled grace periods,
thus reducing memory footprint by almost two orders of magnitude,
admittedly on a microbenchmark
This also begins the transition from kfree_rcu(p) to
kfree_rcu_mightsleep(p). This transition was motivated by bugs where
kfree_rcu(p), which can block, was typed instead of the intended
kfree_rcu(p, rh)
- SRCU updates, perhaps most notably fixing a bug that causes SRCU to
fail when booted on a system with a non-zero boot CPU. This
surprising situation actually happens for kdump kernels on the
powerpc architecture
This also adds an srcu_down_read() and srcu_up_read(), which act like
srcu_read_lock() and srcu_read_unlock(), but allow an SRCU read-side
critical section to be handed off from one task to another
- Clean up the now-useless SRCU Kconfig option
There are a few more commits that are not yet acked or pulled into
maintainer trees, and these will be in a pull request for a later
merge window
- RCU-tasks updates, perhaps most notably these fixes:
- A strange interaction between PID-namespace unshare and the
RCU-tasks grace period that results in a low-probability but
very real hang
- A race between an RCU tasks rude grace period on a single-CPU
system and CPU-hotplug addition of the second CPU that can
result in a too-short grace period
- A race between shrinking RCU tasks down to a single callback
list and queuing a new callback to some other CPU, but where
that queuing is delayed for more than an RCU grace period. This
can result in that callback being stranded on the non-boot CPU
- Torture-test updates and fixes
- Torture-test scripting updates and fixes
- Provide additional RCU CPU stall-warning information in kernels built
with CONFIG_RCU_CPU_STALL_CPUTIME=y, and restore the full five-minute
timeout limit for expedited RCU CPU stall warnings
* tag 'rcu.2023.02.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (80 commits)
rcu/kvfree: Add kvfree_rcu_mightsleep() and kfree_rcu_mightsleep()
kernel/notifier: Remove CONFIG_SRCU
init: Remove "select SRCU"
fs/quota: Remove "select SRCU"
fs/notify: Remove "select SRCU"
fs/btrfs: Remove "select SRCU"
fs: Remove CONFIG_SRCU
drivers/pci/controller: Remove "select SRCU"
drivers/net: Remove "select SRCU"
drivers/md: Remove "select SRCU"
drivers/hwtracing/stm: Remove "select SRCU"
drivers/dax: Remove "select SRCU"
drivers/base: Remove CONFIG_SRCU
rcu: Disable laziness if lazy-tracking says so
rcu: Track laziness during boot and suspend
rcu: Remove redundant call to rcu_boost_kthread_setaffinity()
rcu: Allow up to five minutes expedited RCU CPU stall-warning timeouts
rcu: Align the output of RCU CPU stall warning messages
rcu: Add RCU stall diagnosis information
sched: Add helper nr_context_switches_cpu()
...
Since 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations are
used to identify modules. As a consequence, MODULE_LICENSE in non-modules
causes modprobe to misidentify the object file as a module when it is not,
and modprobe might succeed rather than failing with a suitable error
message.
For tristate modules that can be either built-in or loaded at runtime,
modprobe succeeds in both cases:
# modprobe ext4
[exit status zero if CONFIG_EXT4_FS=y or =m]
For boolean modules like the Standard Hot Plug Controller driver (shpchp)
that cannot be loaded at runtime, modprobe should always fail like this:
# modprobe shpchp
modprobe: FATAL: Module shpchp not found in directory /lib/modules/...
[exit status non-zero regardless of CONFIG_HOTPLUG_PCI_SHPC]
but prior to this commit, shpchp_core.c contained MODULE_LICENSE, so
"modprobe shpchp" silently succeeded when it should have failed.
Remove MODULE_LICENSE in files that cannot be built as modules.
[bhelgaas: commit log, squash]
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20230216152410.4312-1-nick.alcock@oracle.com/
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Commit a474d3fbe2 ("PCI/MSI: Get rid of PCI_MSI_IRQ_DOMAIN") removed
PCI_MSI_IRQ_DOMAIN and made all previous references to it refer to PCI_MSI
instead.
PCI_HYPERV_INTERFACE already depended on PCI_MSI && PCI_MSI_IRQ_DOMAIN, so
we ended up with a redundant dependency on PCI_MSI && PCI_MSI. Drop the
duplicate.
No functional change. Just a stylistic clean-up.
Link: https://lore.kernel.org/r/20221215101310.9135-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
IPQ8074 has one Gen2 and one Gen3 port, with Gen2 port already supported.
Add compatible for Gen3 port which uses the same controller as IPQ6018.
Link: https://lore.kernel.org/r/20230113164449.906002-7-robimarko@gmail.com
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Implement the new host_deinit() callback so that the PHY is powered off
and regulators and clocks are disabled also on late host-init errors.
Link: https://lore.kernel.org/r/20221017114705.8277-2-johan+linaro@kernel.org
Fixes: 82a823833f ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
dw_pcie_ep_linkup() may take more time to execute depending on the EPF
driver implementation. Calling this API in the hard IRQ handler is not
encouraged since the hard IRQ handlers are supposed to complete quickly.
So move the dw_pcie_ep_linkup() call to threaded IRQ handler.
Link: https://lore.kernel.org/linux-pci/20230124071158.5503-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
The "dra7xx-pcie-main" hard IRQ handler is just printing the IRQ status
and calling the dw_pcie_ep_linkup() API if LINK_UP status is set. But the
execution of dw_pcie_ep_linkup() depends on the EPF driver and may take
more time depending on the EPF implementation.
In general, hard IRQ handlers are supposed to return quickly and not block
for so long. Moreover, there is no real need of the current IRQ handler to
be a hard IRQ handler. So switch to the threaded IRQ handler for the
"dra7xx-pcie-main" IRQ.
Link: https://lore.kernel.org/linux-pci/20230124071158.5503-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
People are reporting that pci-mvebu.c driver does not work with recent
mainline kernel. There are more bugs which prevents its for daily usage.
So lets mark it as broken for now, until somebody would be able to fix it
in mainline kernel.
Link: https://lore.kernel.org/r/20230114164125.1298-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Some devices like ZBT WE1326 and ZBT WF3526-P and some Netgear models need
to delay phy port initialization after calling the mt7621_pcie_init_port()
driver function to get into reliable boots for both warm and hard resets.
The delay required to detect the ports seems to be in the range [75-100]
milliseconds.
If the ports are not detected the controller is not functional.
There is no datasheet or something similar to really understand why this
extra delay is needed only for these devices and it is not for most of
the boards that are built on mt7621 SoC.
This issue has been reported by openWRT community and the complete
discussion is in [0]. The 100 milliseconds delay has been tested in all
devices to validate it.
Add the extra 100 milliseconds delay to fix the issue.
[0]: https://github.com/openwrt/openwrt/pull/11220
Link: https://lore.kernel.org/r/20221231074041.264738-1-sergio.paracuellos@gmail.com
Fixes: 2bdd5238e7 ("PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Now that the SRCU Kconfig option is unconditionally selected, there is
no longer any point in selecting it. Therefore, remove the "select SRCU"
Kconfig statements.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: "Krzysztof Wilczyński" <kw@linux.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: <linux-pci@vger.kernel.org>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
PCIe ports reserved for VMD use are not visible to BIOS and therefore not
configured to enable PCIe ASPM or LTR values (which BIOS will configure if
they are not set). Lack of this programming results in high power
consumption on laptops as reported in bugzilla. For affected products use
pci_enable_link_state to set the allowed link states for devices on the
root ports. Also set the LTR value to the maximum value needed for the SoC.
This is a workaround for products from Rocket Lake through Alder Lake.
Raptor Lake, the latest product at this time, has already implemented LTR
configuring in BIOS. Future products will move ASPM configuration back to
BIOS as well. As this solution is intended for laptops, support is not
added for hotplug or for devices downstream of a switch on the root port.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=212355
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215063
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213717
Link: https://lore.kernel.org/r/20230120031522.2304439-5-david.e.box@linux.intel.com
Signed-off-by: Michael Bottini <michael.a.bottini@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jon Derrick <jonathan.derrick@linux.dev>
Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Simplify the device ID list by creating a grouping of features shared by
client products.
Suggested-by: Jon Derrick <jonathan.derrick@linux.dev>
Link: https://lore.kernel.org/r/20230120031522.2304439-4-david.e.box@linux.intel.com
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Use PCI_VDEVICE to simplify the device table.
Link: https://lore.kernel.org/r/20230120031522.2304439-3-david.e.box@linux.intel.com
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jon Derrick <jonathan.derrick@linux.dev>
Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Except for isochronous-configured devices, software may set
Max_Read_Request_Size (MRRS) to any value up to 4096. If a device issues a
read request with size greater than the completer's Max_Payload_Size (MPS),
the completer is required to break the response into multiple completions.
Instead of correctly responding with multiple completions to a large read
request, some LS7A Root Ports respond with a Completer Abort. To prevent
this, the MRRS must be limited to an implementation-specific value.
The OS cannot detect that value, so rely on BIOS to configure MRRS before
booting, and quirk the Root Ports so we never set an MRRS larger than that
BIOS value for any downstream device.
N.B. Hot-added devices are not configured by BIOS, and they power up with
MRRS = 512 bytes, so these devices will be limited to 512 bytes. If the
LS7A limit is smaller, those hot-added devices may not work correctly, but
per [1], hotplug is not supported with this chipset revision.
[1] https://lore.kernel.org/r/073638a7-ae68-2847-ac3d-29e5e760d6af@loongson.cn
[bhelgaas: commit log]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216884
Link: https://lore.kernel.org/r/20230201043018.778499-3-chenhuacai@loongson.cn
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Since commit fc7a6209d5 ("bus: Make remove callback return
void") forces bus_type::remove be void-returned, it doesn't
make much sense for any bus based driver implementing remove
callbalk to return non-void to its caller.
As such, change the remove function for Hyper-V VMBus based
drivers to return void.
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Link: https://lore.kernel.org/r/TYCP286MB2323A93C55526E4DF239D3ACCAFA9@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Wei Liu <wei.liu@kernel.org>
i.MX PCIe is one dual mode PCIe controller.
Add i.MX PCIe EP mode support here, and split the PCIe modes to the Root
Complex mode and Endpoint mode.
Link: https://lore.kernel.org/r/1673847684-31893-12-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
a474d3fbe2 ("PCI/MSI: Get rid of PCI_MSI_IRQ_DOMAIN") removed
PCI_MSI_IRQ_DOMAIN and changed all references to refer to PCI_MSI instead.
ba6ed462dc ("PCI: dwc: Add Baikal-T1 PCIe controller support")
independently added PCIE_BT1, depending on PCI_MSI_IRQ_DOMAIN.
Both commits appeared in v6.2-rc1, so the latter missed the conversion from
PCI_MSI_IRQ_DOMAIN to PCI_MSI. Update PCIE_BT1 to depend on PCI_MSI
instead.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20221215103452.23131-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
- New support:
- Allwinner H616 USB PHY and A100 DPHY support
- TI J721s2, J784s4 and J721e support
- Freescale i.MX8MP PCIe PHY support
- New driver for Renesas Ethernet SERDES supporting R-Car S4-8
- Qualcomm SM8450 PCIe1 PHY support in EP mode
- Updates:
- again a big pile of updates on qcom-qmp-* drivers following the
driver split and reorganization merged earlier
- Phy order of API calls documentation update
-----BEGIN PGP SIGNATURE-----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=4HRP
-----END PGP SIGNATURE-----
Merge tag 'phy-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"This tme we have again a big pile of qcom-qmp-* changes, one new
driver and bunch of new hardware support.
New hardware support:
- Allwinner H616 USB PHY and A100 DPHY support
- TI J721s2, J784s4 and J721e support
- Freescale i.MX8MP PCIe PHY support
- New driver for Renesas Ethernet SERDES supporting R-Car S4-8
- Qualcomm SM8450 PCIe1 PHY support in EP mode
- Qualcomm SC8280XP PCIe PHY support (including x4 mode)
- Fixed Qualcomm SC8280XP USB4-USB3-DP PHY DT bindings
Updates:
- A big pile of updates on qcom-qmp-* drivers following the driver
split and reorganization merged earlier
- Phy order of API calls documentation update"
* tag 'phy-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (174 commits)
phy: ti: phy-j721e-wiz: add j721s2-wiz-10g module support
dt-bindings: phy-j721e-wiz: add j721s2 compatible string
phy: use devm_platform_get_and_ioremap_resource()
phy: allwinner: phy-sun6i-mipi-dphy: Add the A100 DPHY variant
phy: allwinner: phy-sun6i-mipi-dphy: Add a variant power-on hook
phy: allwinner: phy-sun6i-mipi-dphy: Set the enable bit last
phy: allwinner: phy-sun6i-mipi-dphy: Make RX support optional
dt-bindings: sun6i-a31-mipi-dphy: Add the A100 DPHY variant
dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts property
phy: qcom-qmp-pcie: drop redundant clock allocation
phy: qcom-qmp-usb: drop redundant clock allocation
phy: qcom-qmp: drop unused type header
phy: qcom-qmp-usb: drop sc8280xp reference-clock source
dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: drop reference-clock source
phy: qcom-qmp-combo: add support for updated sc8280xp binding
phy: qcom-qmp-combo: rename DP_PHY register pointer
phy: qcom-qmp-combo: rename common-register pointers
phy: qcom-qmp-combo: clean up DP clock callbacks
phy: qcom-qmp-combo: separate clock and provider registration
phy: qcom-qmp-combo: add clock registration helper
...
-----BEGIN PGP SIGNATURE-----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=KULr
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Squash portdrv_{core,pci}.c into portdrv.c to ease maintenance and
make more things static.
- Make portdrv bind to Switch Ports that have AER. Previously, if
these Ports lacked MSI/MSI-X, portdrv failed to bind, which meant
the Ports couldn't be suspended to low-power states. AER on these
Ports doesn't use interrupts, and the AER driver doesn't need to
claim them.
- Assign PCI domain IDs using ida_alloc(), which makes host bridge
add/remove work better.
Resource management:
- To work better with recent BIOSes that use EfiMemoryMappedIO for
PCI host bridge apertures, remove those regions from the E820 map
(E820 entries normally prevent us from allocating BARs). In v5.19,
we added some quirks to disable E820 checking, but that's not very
maintainable. EfiMemoryMappedIO means the OS needs to map the
region for use by EFI runtime services; it shouldn't prevent OS
from using it.
PCIe native device hotplug:
- Build pciehp by default if USB4 is enabled, since Thunderbolt/USB4
PCIe tunneling depends on native PCIe hotplug.
- Enable Command Completed Interrupt only if supported to avoid user
confusion from lspci output that says this is enabled but not
supported.
- Prevent pciehp from binding to Switch Upstream Ports; this happened
because of interaction with acpiphp and caused devices below the
Upstream Port to disappear.
Power management:
- Convert AGP drivers to generic power management. We hope to remove
legacy power management from the PCI core eventually.
Virtualization:
- Fix pci_device_is_present(), which previously always returned
"false" for VFs, causing virtio hangs when unbinding the driver.
Miscellaneous:
- Convert drivers to gpiod API to prepare for dropping some legacy
code.
- Fix DOE fencepost error for the maximum data object length.
Baikal-T1 PCIe controller driver:
- Add driver and DT bindings.
Broadcom STB PCIe controller driver:
- Enable Multi-MSI.
- Delay 100ms after PERST# deassert to allow power and clocks to
stabilize.
- Configure Read Completion Boundary to 64 bytes.
Freescale i.MX6 PCIe controller driver:
- Initialize PHY before deasserting core reset to fix a regression in
v6.0 on boards where the PHY provides the reference.
- Fix imx6sx and imx8mq clock names in DT schema.
Intel VMD host bridge driver:
- Fix Secondary Bus Reset on VMD bridges, which allows reset of NVMe
SSDs in VT-d pass-through scenarios.
- Disable MSI remapping, which gets re-enabled by firmware during
suspend/resume.
MediaTek PCIe Gen3 controller driver:
- Add MT7986 and MT8195 support.
Qualcomm PCIe controller driver:
- Add SC8280XP/SA8540P basic interconnect support.
Rockchip DesignWare PCIe controller driver:
- Base DT schema on common Synopsys schema.
Synopsys DesignWare PCIe core:
- Collect DT items shared between Root Port and Endpoint (PERST GPIO,
PHY info, clocks, resets, link speed, number of lanes, number of
iATU windows, interrupt info, etc) to snps,dw-pcie-common.yaml.
- Add dma-ranges support for Root Ports and Endpoints.
- Consolidate DT resource retrieval for "dbi", "dbi2", "atu", etc. to
reduce code duplication.
- Add generic names for clocks and resets to encourage more
consistent naming across drivers using DesignWare IP.
- Stop advertising PTM Responder role for Endpoints, which aren't
allowed to be responders.
TI J721E PCIe driver:
- Add j721s2 host mode ID to DT schema.
- Add interrupt properties to DT schema.
Toshiba Visconti PCIe controller driver:
- Fix interrupts array max constraints in DT schema"
* tag 'pci-v6.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (95 commits)
x86/PCI: Use pr_info() when possible
x86/PCI: Fix log message typo
x86/PCI: Tidy E820 removal messages
PCI: Skip allocate_resource() if too little space available
efi/x86: Remove EfiMemoryMappedIO from E820 map
PCI/portdrv: Allow AER service only for Root Ports & RCECs
PCI: xilinx-nwl: Fix coding style violations
PCI: mvebu: Switch to using gpiod API
PCI: pciehp: Enable Command Completed Interrupt only if supported
PCI: aardvark: Switch to using devm_gpiod_get_optional()
dt-bindings: PCI: mediatek-gen3: add support for mt7986
dt-bindings: PCI: mediatek-gen3: add SoC based clock config
dt-bindings: PCI: qcom: Allow 'dma-coherent' property
PCI: mt7621: Add sentinel to quirks table
PCI: vmd: Fix secondary bus reset for Intel bridges
PCI: endpoint: pci-epf-vntb: Fix sparse ntb->reg build warning
PCI: endpoint: pci-epf-vntb: Fix sparse build warning for epf_db
PCI: endpoint: pci-epf-vntb: Replace hardcoded 4 with sizeof(u32)
PCI: endpoint: pci-epf-vntb: Remove unused epf_db_phy struct member
PCI: endpoint: pci-epf-vntb: Fix call pci_epc_mem_free_addr() in error path
...
- Core:
The bulk is the rework of the MSI subsystem to support per device MSI
interrupt domains. This solves conceptual problems of the current
PCI/MSI design which are in the way of providing support for PCI/MSI[-X]
and the upcoming PCI/IMS mechanism on the same device.
IMS (Interrupt Message Store] is a new specification which allows device
manufactures to provide implementation defined storage for MSI messages
contrary to the uniform and specification defined storage mechanisms for
PCI/MSI and PCI/MSI-X. IMS not only allows to overcome the size limitations
of the MSI-X table, but also gives the device manufacturer the freedom to
store the message in arbitrary places, even in host memory which is shared
with the device.
There have been several attempts to glue this into the current MSI code,
but after lengthy discussions it turned out that there is a fundamental
design problem in the current PCI/MSI-X implementation. This needs some
historical background.
When PCI/MSI[-X] support was added around 2003, interrupt management was
completely different from what we have today in the actively developed
architectures. Interrupt management was completely architecture specific
and while there were attempts to create common infrastructure the
commonalities were rudimentary and just providing shared data structures and
interfaces so that drivers could be written in an architecture agnostic
way.
The initial PCI/MSI[-X] support obviously plugged into this model which
resulted in some basic shared infrastructure in the PCI core code for
setting up MSI descriptors, which are a pure software construct for holding
data relevant for a particular MSI interrupt, but the actual association to
Linux interrupts was completely architecture specific. This model is still
supported today to keep museum architectures and notorious stranglers
alive.
In 2013 Intel tried to add support for hot-pluggable IO/APICs to the kernel,
which was creating yet another architecture specific mechanism and resulted
in an unholy mess on top of the existing horrors of x86 interrupt handling.
The x86 interrupt management code was already an incomprehensible maze of
indirections between the CPU vector management, interrupt remapping and the
actual IO/APIC and PCI/MSI[-X] implementation.
At roughly the same time ARM struggled with the ever growing SoC specific
extensions which were glued on top of the architected GIC interrupt
controller.
This resulted in a fundamental redesign of interrupt management and
provided the today prevailing concept of hierarchical interrupt
domains. This allowed to disentangle the interactions between x86 vector
domain and interrupt remapping and also allowed ARM to handle the zoo of
SoC specific interrupt components in a sane way.
The concept of hierarchical interrupt domains aims to encapsulate the
functionality of particular IP blocks which are involved in interrupt
delivery so that they become extensible and pluggable. The X86
encapsulation looks like this:
|--- device 1
[Vector]---[Remapping]---[PCI/MSI]--|...
|--- device N
where the remapping domain is an optional component and in case that it is
not available the PCI/MSI[-X] domains have the vector domain as their
parent. This reduced the required interaction between the domains pretty
much to the initialization phase where it is obviously required to
establish the proper parent relation ship in the components of the
hierarchy.
While in most cases the model is strictly representing the chain of IP
blocks and abstracting them so they can be plugged together to form a
hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the hardware
it's clear that the actual PCI/MSI[-X] interrupt controller is not a global
entity, but strict a per PCI device entity.
Here we took a short cut on the hierarchical model and went for the easy
solution of providing "global" PCI/MSI domains which was possible because
the PCI/MSI[-X] handling is uniform across the devices. This also allowed
to keep the existing PCI/MSI[-X] infrastructure mostly unchanged which in
turn made it simple to keep the existing architecture specific management
alive.
A similar problem was created in the ARM world with support for IP block
specific message storage. Instead of going all the way to stack a IP block
specific domain on top of the generic MSI domain this ended in a construct
which provides a "global" platform MSI domain which allows overriding the
irq_write_msi_msg() callback per allocation.
In course of the lengthy discussions we identified other abuse of the MSI
infrastructure in wireless drivers, NTB etc. where support for
implementation specific message storage was just mindlessly glued into the
existing infrastructure. Some of this just works by chance on particular
platforms but will fail in hard to diagnose ways when the driver is used
on platforms where the underlying MSI interrupt management code does not
expect the creative abuse.
Another shortcoming of today's PCI/MSI-X support is the inability to
allocate or free individual vectors after the initial enablement of
MSI-X. This results in an works by chance implementation of VFIO (PCI
pass-through) where interrupts on the host side are not set up upfront to
avoid resource exhaustion. They are expanded at run-time when the guest
actually tries to use them. The way how this is implemented is that the
host disables MSI-X and then re-enables it with a larger number of
vectors again. That works by chance because most device drivers set up
all interrupts before the device actually will utilize them. But that's
not universally true because some drivers allocate a large enough number
of vectors but do not utilize them until it's actually required,
e.g. for acceleration support. But at that point other interrupts of the
device might be in active use and the MSI-X disable/enable dance can
just result in losing interrupts and therefore hard to diagnose subtle
problems.
Last but not least the "global" PCI/MSI-X domain approach prevents to
utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact that IMS
is not longer providing a uniform storage and configuration model.
The solution to this is to implement the missing step and switch from
global PCI/MSI domains to per device PCI/MSI domains. The resulting
hierarchy then looks like this:
|--- [PCI/MSI] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
which in turn allows to provide support for multiple domains per device:
|--- [PCI/MSI] device 1
|--- [PCI/IMS] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
|--- [PCI/IMS] device N
This work converts the MSI and PCI/MSI core and the x86 interrupt
domains to the new model, provides new interfaces for post-enable
allocation/free of MSI-X interrupts and the base framework for PCI/IMS.
PCI/IMS has been verified with the work in progress IDXD driver.
There is work in progress to convert ARM over which will replace the
platform MSI train-wreck. The cleanup of VFIO, NTB and other creative
"solutions" are in the works as well.
- Drivers:
- Updates for the LoongArch interrupt chip drivers
- Support for MTK CIRQv2
- The usual small fixes and updates all over the place
-----BEGIN PGP SIGNATURE-----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=9erA
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt core and driver subsystem:
The bulk is the rework of the MSI subsystem to support per device MSI
interrupt domains. This solves conceptual problems of the current
PCI/MSI design which are in the way of providing support for
PCI/MSI[-X] and the upcoming PCI/IMS mechanism on the same device.
IMS (Interrupt Message Store] is a new specification which allows
device manufactures to provide implementation defined storage for MSI
messages (as opposed to PCI/MSI and PCI/MSI-X that has a specified
message store which is uniform accross all devices). The PCI/MSI[-X]
uniformity allowed us to get away with "global" PCI/MSI domains.
IMS not only allows to overcome the size limitations of the MSI-X
table, but also gives the device manufacturer the freedom to store the
message in arbitrary places, even in host memory which is shared with
the device.
There have been several attempts to glue this into the current MSI
code, but after lengthy discussions it turned out that there is a
fundamental design problem in the current PCI/MSI-X implementation.
This needs some historical background.
When PCI/MSI[-X] support was added around 2003, interrupt management
was completely different from what we have today in the actively
developed architectures. Interrupt management was completely
architecture specific and while there were attempts to create common
infrastructure the commonalities were rudimentary and just providing
shared data structures and interfaces so that drivers could be written
in an architecture agnostic way.
The initial PCI/MSI[-X] support obviously plugged into this model
which resulted in some basic shared infrastructure in the PCI core
code for setting up MSI descriptors, which are a pure software
construct for holding data relevant for a particular MSI interrupt,
but the actual association to Linux interrupts was completely
architecture specific. This model is still supported today to keep
museum architectures and notorious stragglers alive.
In 2013 Intel tried to add support for hot-pluggable IO/APICs to the
kernel, which was creating yet another architecture specific mechanism
and resulted in an unholy mess on top of the existing horrors of x86
interrupt handling. The x86 interrupt management code was already an
incomprehensible maze of indirections between the CPU vector
management, interrupt remapping and the actual IO/APIC and PCI/MSI[-X]
implementation.
At roughly the same time ARM struggled with the ever growing SoC
specific extensions which were glued on top of the architected GIC
interrupt controller.
This resulted in a fundamental redesign of interrupt management and
provided the today prevailing concept of hierarchical interrupt
domains. This allowed to disentangle the interactions between x86
vector domain and interrupt remapping and also allowed ARM to handle
the zoo of SoC specific interrupt components in a sane way.
The concept of hierarchical interrupt domains aims to encapsulate the
functionality of particular IP blocks which are involved in interrupt
delivery so that they become extensible and pluggable. The X86
encapsulation looks like this:
|--- device 1
[Vector]---[Remapping]---[PCI/MSI]--|...
|--- device N
where the remapping domain is an optional component and in case that
it is not available the PCI/MSI[-X] domains have the vector domain as
their parent. This reduced the required interaction between the
domains pretty much to the initialization phase where it is obviously
required to establish the proper parent relation ship in the
components of the hierarchy.
While in most cases the model is strictly representing the chain of IP
blocks and abstracting them so they can be plugged together to form a
hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the
hardware it's clear that the actual PCI/MSI[-X] interrupt controller
is not a global entity, but strict a per PCI device entity.
Here we took a short cut on the hierarchical model and went for the
easy solution of providing "global" PCI/MSI domains which was possible
because the PCI/MSI[-X] handling is uniform across the devices. This
also allowed to keep the existing PCI/MSI[-X] infrastructure mostly
unchanged which in turn made it simple to keep the existing
architecture specific management alive.
A similar problem was created in the ARM world with support for IP
block specific message storage. Instead of going all the way to stack
a IP block specific domain on top of the generic MSI domain this ended
in a construct which provides a "global" platform MSI domain which
allows overriding the irq_write_msi_msg() callback per allocation.
In course of the lengthy discussions we identified other abuse of the
MSI infrastructure in wireless drivers, NTB etc. where support for
implementation specific message storage was just mindlessly glued into
the existing infrastructure. Some of this just works by chance on
particular platforms but will fail in hard to diagnose ways when the
driver is used on platforms where the underlying MSI interrupt
management code does not expect the creative abuse.
Another shortcoming of today's PCI/MSI-X support is the inability to
allocate or free individual vectors after the initial enablement of
MSI-X. This results in an works by chance implementation of VFIO (PCI
pass-through) where interrupts on the host side are not set up upfront
to avoid resource exhaustion. They are expanded at run-time when the
guest actually tries to use them. The way how this is implemented is
that the host disables MSI-X and then re-enables it with a larger
number of vectors again. That works by chance because most device
drivers set up all interrupts before the device actually will utilize
them. But that's not universally true because some drivers allocate a
large enough number of vectors but do not utilize them until it's
actually required, e.g. for acceleration support. But at that point
other interrupts of the device might be in active use and the MSI-X
disable/enable dance can just result in losing interrupts and
therefore hard to diagnose subtle problems.
Last but not least the "global" PCI/MSI-X domain approach prevents to
utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact
that IMS is not longer providing a uniform storage and configuration
model.
The solution to this is to implement the missing step and switch from
global PCI/MSI domains to per device PCI/MSI domains. The resulting
hierarchy then looks like this:
|--- [PCI/MSI] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
which in turn allows to provide support for multiple domains per
device:
|--- [PCI/MSI] device 1
|--- [PCI/IMS] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
|--- [PCI/IMS] device N
This work converts the MSI and PCI/MSI core and the x86 interrupt
domains to the new model, provides new interfaces for post-enable
allocation/free of MSI-X interrupts and the base framework for
PCI/IMS. PCI/IMS has been verified with the work in progress IDXD
driver.
There is work in progress to convert ARM over which will replace the
platform MSI train-wreck. The cleanup of VFIO, NTB and other creative
"solutions" are in the works as well.
Drivers:
- Updates for the LoongArch interrupt chip drivers
- Support for MTK CIRQv2
- The usual small fixes and updates all over the place"
* tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (134 commits)
irqchip/ti-sci-inta: Fix kernel doc
irqchip/gic-v2m: Mark a few functions __init
irqchip/gic-v2m: Include arm-gic-common.h
irqchip/irq-mvebu-icu: Fix works by chance pointer assignment
iommu/amd: Enable PCI/IMS
iommu/vt-d: Enable PCI/IMS
x86/apic/msi: Enable PCI/IMS
PCI/MSI: Provide pci_ims_alloc/free_irq()
PCI/MSI: Provide IMS (Interrupt Message Store) support
genirq/msi: Provide constants for PCI/IMS support
x86/apic/msi: Enable MSI_FLAG_PCI_MSIX_ALLOC_DYN
PCI/MSI: Provide post-enable dynamic allocation interfaces for MSI-X
PCI/MSI: Provide prepare_desc() MSI domain op
PCI/MSI: Split MSI-X descriptor setup
genirq/msi: Provide MSI_FLAG_MSIX_ALLOC_DYN
genirq/msi: Provide msi_domain_alloc_irq_at()
genirq/msi: Provide msi_domain_ops:: Prepare_desc()
genirq/msi: Provide msi_desc:: Msi_data
genirq/msi: Provide struct msi_map
x86/apic/msi: Remove arch_create_remap_msi_irq_domain()
...
- Switch to using devm_gpiod_get_optional() so we can stop exporting
devm_gpiod_get_from_of_node() (Dmitry Torokhov)
* pci/ctrl/aardvark:
PCI: aardvark: Switch to using devm_gpiod_get_optional()
- Restore MSI remapping configuration during resume because the
configuration is cleared out by firmware when suspending (Nirmal Patel)
- Reset the hierarchy below VMD when probing the VMD; we attempted this
before, but with the wrong device, so it didn't work (Francisco Munoz)
* remotes/lorenzo/pci/vmd:
PCI: vmd: Fix secondary bus reset for Intel bridges
PCI: vmd: Disable MSI remapping after suspend
- Switch from devm_gpiod_get_from_of_node() to devm_fwnode_gpiod_get()
(Dmitry Torokhov)
* remotes/lorenzo/pci/tegra:
PCI: tegra: Switch to using devm_fwnode_gpiod_get
- Add sentinel to mt7621_pcie_quirks_match[] to prevent oops when parsing
the table (John Thomson)
* remotes/lorenzo/pci/mt7621:
PCI: mt7621: Add sentinel to quirks table
Switch the driver away from legacy gpio/of_gpio API to gpiod API, and
remove use of of_get_named_gpio_flags() which I want to make private to
gpiolib.
Link: https://lore.kernel.org/r/Y5EAft42YiT66mVj@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Switch the driver to the generic version of gpiod API (and away from
OF-specific variant), so that we can stop exporting
devm_gpiod_get_from_of_node().
Link: https://lore.kernel.org/r/Y3KMEZFv6dpxA+Gv@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Pali Rohár <pali@kernel.org>
Current driver is missing a sentinel in the struct soc_device_attribute
array, which causes an oops when assessed by the
soc_device_match(mt7621_pcie_quirks_match) call.
This was only exposed once the CONFIG_SOC_MT7621 mt7621 soc_dev_attr
was fixed to register the SOC as a device, in:
commit 7c18b64bba ("mips: ralink: mt7621: do not use kzalloc too early")
Fix it by adding the required sentinel.
Link: https://lore.kernel.org/lkml/26ebbed1-0fe9-4af9-8466-65f841d0b382@app.fastmail.com
Link: https://lore.kernel.org/r/20221205204645.301301-1-git@johnthomson.fastmail.com.au
Fixes: b483b4e4d3 ("staging: mt7621-pci: add quirks for 'E2' revision using 'soc_device_attribute'")
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
The reset was never applied in the current implementation because Intel
Bridges owned by VMD are parentless. Internally, pci_reset_bus() applies
a reset to the parent of the PCI device supplied as argument, but in this
case it failed because there wasn't a parent.
In more detail, this change allows the VMD driver to enumerate NVMe devices
in pass-through configurations when guest reboots are performed. There was
an attempted to fix this, but later we discovered that the code inside
pci_reset_bus() wasn’t triggering secondary bus resets. Therefore, we
updated the parameters passed to it, and now NVMe SSDs attached to VMD
bridges are properly enumerated in VT-d pass-through scenarios.
Link: https://lore.kernel.org/r/20221206001637.4744-1-francisco.munoz.ruiz@linux.intel.com
Fixes: 6aab562229 ("PCI: vmd: Clean up domain before enumeration")
Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Reviewed-by: Jonathan Derrick <jonathan.derrick@linux.dev>
The function hv_set_affinity was removed in commit 831c1ae7 ("PCI: hv:
Make the code arch neutral by adding arch specific interfaces").
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Link: https://lore.kernel.org/r/20221107171831.25283-1-olaf@aepfle.de
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Baikal-T1 SoC is equipped with DWC PCIe v4.60a host controller. It can be
trained to work up to Gen.3 speed over up to x4 lanes. The host controller
is attached to the DW PCIe 3.0 PCS via the PIPE-4 interface, which in its
turn is connected to the DWC 10G PHY. The whole system is supposed to be
fed up with four clock sources: DBI peripheral clock, AXI application
clocks and external PHY/core reference clock generating the 100MHz signal.
In addition to that the platform provide a way to reset each part of the
controller: sticky/non-sticky bits, host controller core, PIPE interface,
PCS/PHY and Hot/Power reset signal. The driver also provides a way to
handle the GPIO-based PERST# signal.
Note due to the Baikal-T1 MMIO peculiarity we have to implement the DBI
interface accessors which make sure the IO operations are dword-aligned.
Link: https://lore.kernel.org/r/20221113191301.5526-21-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Currently almost each platform driver uses its own resets and clocks
naming in order to get the corresponding descriptors. It makes the code
harder to maintain and comprehend especially seeing the DWC PCIe core main
resets and clocks signals set hasn't changed much for about at least one
major IP-core release. So in order to organize things around these signals
we suggest to create a generic interface for them in accordance with the
naming introduced in the DWC PCIe IP-core reference manual:
Application clocks:
- "dbi" - data bus interface clock (on some DWC PCIe platforms it's
referred as "pclk", "pcie", "sys", "ahb", "cfg", "iface",
"gio", "reg", "pcie_apb_sys");
- "mstr" - AXI-bus master interface clock (some DWC PCIe glue drivers
refer to this clock as "port", "bus", "pcie_bus",
"bus_master/master_bus/axi_m", "pcie_aclk");
- "slv" - AXI-bus slave interface clock (also called as "port", "bus",
"pcie_bus", "bus_slave/slave_bus/axi_s", "pcie_aclk",
"pcie_inbound_axi").
Core clocks:
- "pipe" - core-PCS PIPE interface clock coming from external PHY (it's
normally named by the platform drivers as just "pipe");
- "core" - primary clock of the controller (none of the platform drivers
declare such a clock but in accordance with the ref. manual
the devices may have it separately specified);
- "aux" - auxiliary PMC domain clock (it is named by some platforms as
"pcie_aux" and just "aux");
- "ref" - Generic reference clock (it is a generic clock source, which
can be used as a signal source for multiple interfaces, some
platforms call it as "ref", "general", "pcie_phy",
"pcie_phy_ref").
Application resets:
- "dbi" - Data-bus interface reset (it's CSR interface clock and is
normally called as "apb" though technically it's not APB but
DWC PCIe-specific interface);
- "mstr" - AXI-bus master reset (some platforms call it as "port", "apps",
"bus", "axi_m");
- "slv" - ABI-bus slave reset (some platforms call it as "port", "apps",
"bus", "axi_s").
Core resets:
- "non-sticky" - non-sticky CSR flags reset;
- "sticky" - sticky CSR flags reset;
- "pipe" - PIPE-interface (Core-PCS) logic reset (some platforms
call it just "pipe");
- "core" - controller primary reset (resets everything except PMC
module, some platforms refer to this signal as "soft",
"pci");
- "phy" - PCS/PHY block reset (strictly speaking it is normally
connected to the input of an external block, but the
reference manual says it must be available for the PMC
working correctly, some existing platforms call it
"pciephy", "phy", "link");
- "hot" - PMC hot reset signal (also called as "sleep");
- "pwr" - cold reset signal (can be referred as "pwr", "turnoff").
Bus reset:
- "perst" - PCIe standard signal used to reset the PCIe peripheral
devices.
As you can see each platform uses it's own naming for basically the same
set of the signals. In the framework of this commit we suggest to add a
set of the clocks and reset signals resources, corresponding names and
identifiers for each denoted entity. At current stage the platforms will
be able to use the provided infrastructure to automatically request all
these resources and manipulate with them in the Host/EP init callbacks.
Alas it isn't that easy to create a common cold/hot reset procedure due to
too many platform-specifics in the procedure, like the external flags
exposure and the delays requirement.
Link: https://lore.kernel.org/r/20221113191301.5526-20-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Since the iATU CSR region is now retrieved in the DW PCIe resources getter
there is no much benefits in the iATU detection procedures splitting up.
Therefore let's join the iATU unroll/viewport detection procedure with the
rest of the iATU parameters detection code. The resultant method will be
as coherent as before, while the redundant functions will be eliminated
thus producing more readable code.
Link: https://lore.kernel.org/r/20221113191301.5526-19-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Currently the DW PCIe Root Port and Endpoint CSR spaces are retrieved in
the separate parts of the DW PCIe core driver. It doesn't really make
sense since the both controller types have identical set of the core CSR
regions: DBI, DBI CS2 and iATU/eDMA. Thus we can simplify the DW PCIe Host
and EP initialization methods by moving the platform-specific registers
space getting and mapping into a common method. It gets to be even more
justified seeing the CSRs base address pointers are preserved in the
common DW PCIe descriptor. Note all the OF-based common DW PCIe settings
initialization will be moved to the new method too in order to have a
single function for all the generic platform properties handling in single
place.
A nice side-effect of this change is that the pcie-designware-host.c and
pcie-designware-ep.c drivers are cleaned up from all the direct dw_pcie
storage modification, which makes the DW PCIe core, Root Port and Endpoint
modules more coherent.
Link: https://lore.kernel.org/r/20221113191301.5526-18-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Since in addition to the already available iATU unrolled mapping we are
about to add a few more DW PCIe platform-specific capabilities (CDM-check
and generic clocks/resets resources) let's add a generic interface to set
and get the flags indicating their availability. The new interface shall
improve maintainability of the platform-specific code.
Link: https://lore.kernel.org/r/20221113191301.5526-17-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
In accordance with the generic PCIe Root Port DT-bindings the "dma-ranges"
property has the same format as the "ranges" property. The only difference
is in their semantics. The "dma-ranges" property describes the PCIe-to-CPU
memory mapping in opposite to the CPU-to-PCIe mapping of the "ranges"
property. Even though the DW PCIe controllers are normally equipped with
the internal Address Translation Unit which inbound and outbound tables
can be used to implement both properties semantics, it was surprising for
me to discover that the host-related part of the DW PCIe driver currently
supports the "ranges" property only while the "dma-ranges" windows are
just ignored. Having the "dma-ranges" supported in the driver would be
very handy for the platforms, that don't tolerate the 1:1 CPU-PCIe memory
mapping and require a customized PCIe memory layout. So let's fix that by
introducing the "dma-ranges" property support.
First of all we suggest to rename the dw_pcie_prog_inbound_atu() method to
dw_pcie_prog_ep_inbound_atu() and create a new version of the
dw_pcie_prog_inbound_atu() function. Thus we'll have two methods for the
RC and EP controllers respectively in the same way as it has been
developed for the outbound ATU setup methods.
Secondly aside with the memory window index and type the new
dw_pcie_prog_inbound_atu() function will accept CPU address, PCIe address
and size as its arguments. These parameters define the PCIe and CPU memory
ranges which will be used to setup the respective inbound ATU mapping. The
passed parameters need to be verified against the ATU ranges constraints
in the same way as it is done for the outbound ranges.
Finally the DMA-ranges detected for the PCIe controller need to be
converted to the inbound ATU entries during the host controller
initialization procedure. It will be done in the framework of the
dw_pcie_iatu_setup() method. Note before setting the inbound ranges up we
need to disable all the inbound ATU entries in order to prevent unexpected
PCIe TLPs translations defined by some third party software like
bootloaders.
Link: https://lore.kernel.org/r/20221113191301.5526-16-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
We have stubs for most OF interfaces even when CONFIG_OF is not set, so we
allow building of most controller drivers in that case for compile testing.
When CONFIG_OF is not set, "of_match_ptr(<match_table>)" compiles to NULL,
which leaves <match_table> unused, resulting in errors like this:
$ make W=1
drivers/pci/controller/pci-xgene.c:636:34: error: ‘xgene_pcie_match_table’ defined but not used [-Werror=unused-const-variable=]
Drop of_match_ptr() to avoid the unused variable warning.
See also 1dff012f63 ("PCI: Drop of_match_ptr() to avoid unused
variables").
Link: https://lore.kernel.org/r/20221025191339.667614-2-helgaas@kernel.org
Link: https://lore.kernel.org/r/20221116205100.1136224-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Now that the PCI/MSI core code does early checking for multi-MSI support
X86_IRQ_ALLOC_CONTIGUOUS_VECTORS is not required anymore.
Remove the flag and rely on MSI_FLAG_MULTI_PCI_MSI.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20221111122015.865042356@linutronix.de
What a zoo:
PCI_MSI
select GENERIC_MSI_IRQ
PCI_MSI_IRQ_DOMAIN
def_bool y
depends on PCI_MSI
select GENERIC_MSI_IRQ_DOMAIN
Ergo PCI_MSI enables PCI_MSI_IRQ_DOMAIN which in turn selects
GENERIC_MSI_IRQ_DOMAIN. So all the dependencies on PCI_MSI_IRQ_DOMAIN are
just an indirection to PCI_MSI.
Match the reality and just admit that PCI_MSI requires
GENERIC_MSI_IRQ_DOMAIN.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20221111122014.467556921@linutronix.de
This patch switches the driver away from legacy gpio/of_gpio API to
gpiod API, and removes use of of_get_named_gpio_flags() which I want to
make private to gpiolib.
Link: https://lore.kernel.org/r/20220906204301.3736813-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Jeffrey added Multi-MSI support to the pci-hyperv driver by the 4 patches:
08e61e861a ("PCI: hv: Fix multi-MSI to allow more than one MSI vector")
455880dfe2 ("PCI: hv: Fix hv_arch_irq_unmask() for multi-MSI")
b4b77778ec ("PCI: hv: Reuse existing IRTE allocation in compose_msi_msg()")
a2bad844a6 ("PCI: hv: Fix interrupt mapping for multi-MSI")
It turns out that the third patch (b4b77778ec) causes a performance
regression because all the interrupts now happen on 1 physical CPU (or two
pCPUs, if one pCPU doesn't have enough vectors). When a guest has many PCI
devices, it may suffer from soft lockups if the workload is heavy, e.g.,
see https://lwn.net/ml/linux-kernel/20220804025104.15673-1-decui@microsoft.com/
Commit b4b77778ec itself is good. The real issue is that the hypercall in
hv_irq_unmask() -> hv_arch_irq_unmask() ->
hv_do_hypercall(HVCALL_RETARGET_INTERRUPT...) only changes the target
virtual CPU rather than physical CPU; with b4b77778ec, the pCPU is
determined only once in hv_compose_msi_msg() where only vCPU0 is specified;
consequently the hypervisor only uses 1 target pCPU for all the interrupts.
Note: before b4b77778ec, the pCPU is determined twice, and when the pCPU
is determined the second time, the vCPU in the effective affinity mask is
used (i.e., it isn't always vCPU0), so the hypervisor chooses different
pCPU for each interrupt.
The hypercall will be fixed in future to update the pCPU as well, but
that will take quite a while, so let's restore the old behavior in
hv_compose_msi_msg(), i.e., don't reuse the existing IRTE allocation for
single-MSI and MSI-X; for multi-MSI, we choose the vCPU in a round-robin
manner for each PCI device, so the interrupts of different devices can
happen on different pCPUs, though the interrupts of each device happen on
some single pCPU.
The hypercall fix may not be backported to all old versions of Hyper-V, so
we want to have this guest side change forever (or at least till we're sure
the old affected versions of Hyper-V are no longer supported).
Fixes: b4b77778ec ("PCI: hv: Reuse existing IRTE allocation in compose_msi_msg()")
Co-developed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Co-developed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20221104222953.11356-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
When the PHY is the reference clock provider then it must be initialized
and powered on before the reset on the client is deasserted, otherwise
the link will never come up. The order was changed in cf236e0c0d.
Restore the correct order to make the driver work again on boards where
the PHY provides the reference clock. This also changes the order for
boards where the Soc is the PHY reference clock divider, but this
shouldn't do any harm.
Link: https://lore.kernel.org/r/20221101095714.440001-1-s.hauer@pengutronix.de
Fixes: cf236e0c0d ("PCI: imx6: Do not hide PHY driver callbacks and refine the error handling")
Tested-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
On Qualcomm platforms like SC8280XP and SA8540P, interconnect bandwidth
must be requested before enabling interconnect clocks.
Add basic support for managing an optional "pcie-mem" interconnect path
by setting a low constraint before enabling clocks and updating it after
the link is up.
Note that it is not possible for a controller driver to set anything but
a maximum peak bandwidth as expected average bandwidth will vary with
use case and actual use (and power policy?). This very much remains an
unresolved problem with the interconnect framework.
Also note that no constraint is set for the SC8280XP/SA8540P "cpu-pcie"
path for now as it is not clear what an appropriate constraint would be
(and the system does not crash when left unspecified).
Link: https://lore.kernel.org/r/20221102090705.23634-3-johan+linaro@kernel.org
Fixes: 70574511f3 ("PCI: qcom: Add support for SC8280XP")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
MSI remapping is disabled by VMD driver for Intel's Icelake and
newer systems in order to improve performance by setting
VMCONFIG_MSI_REMAP. By design VMCONFIG_MSI_REMAP register is cleared
by firmware during boot. The same register gets cleared when system
is put in S3 power state. VMD driver needs to set this register again
in order to avoid interrupt issues with devices behind VMD if MSI
remapping was disabled before.
Link: https://lore.kernel.org/r/20221109142652.450998-1-nirmal.patel@linux.intel.com
Fixes: ee81ee84f8 ("PCI: vmd: Disable MSI-X remapping when possible")
Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Francisco Munoz <francisco.munoz.ruiz@linux.intel.com>
Set RCB_MPS mode bit so that data for PCIe read requests up to the size of
the Maximum Payload Size (MPS) are returned in one completion, and data for
PCIe read requests greater than the MPS are split at the specified Read
Completion Boundary setting.
Set RCB_64B so that the Read Compeletion Boundary is 64B.
Link: https://lore.kernel.org/r/20221011184211.18128-6-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
A number of inline functions are called rarely and/or are not
time-critical. Take out the "inline" and let the compiler do its work.
Link: https://lore.kernel.org/r/20221011184211.18128-5-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
It would be nice to replace the PCIe link-up loop as well but
there are too many uses of this that do not poll (and the
read_poll_timeout uses "timeout==0" to loop forever).
Link: https://lore.kernel.org/r/20221011184211.18128-4-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Be prudent and give some time for power and clocks to become stable. As
described in the PCIe CEM specification sections 2.2 and 2.2.1; as well as
PCIe r5.0, 6.6.1.
Link: https://lore.kernel.org/r/20221011184211.18128-3-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
We always wanted to enable Multi-MSI but didn't have a test device until
recently. In addition, there are some devices out there that will ask for
multiple MSI but refuse to work if they are only granted one.
Link: https://lore.kernel.org/r/20221011184211.18128-2-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Many host controller drivers #include <linux/of_irq.h> even though they
don't need it. Remove the unnecessary #includes.
Link: https://lore.kernel.org/r/20221031153954.1163623-6-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Roy Zang <roy.zang@nxp.com>
pci-xgene-msi.c uses irq_domain_add_linear() and related interfaces, so it
needs <linux/irqdomain.h> but doesn't include it directly; it relies on the
fact that <linux/of_irq.h> includes it.
But pci-xgene-msi.c *doesn't* need <linux/of_irq.h> itself. Include
<linux/irqdomain.h> directly to remove this implicit dependency so a future
patch can drop <linux/of_irq.h>.
Link: https://lore.kernel.org/r/20221031153954.1163623-5-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
pci-mvebu.c uses irq_domain_add_linear() and related interfaces but relies
on <linux/irqdomain.h> but doesn't include it directly; it relies on the
fact that <linux/of_irq.h> includes it.
Include <linux/irqdomain.h> directly to remove this implicit dependency.
Link: https://lore.kernel.org/r/20221031153954.1163623-4-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
pcie-microchip-host.c uses irq_domain_add_linear() and related interfaces,
so it needs <linux/irqdomain.h> but doesn't include it directly; it relies
on the fact that <linux/of_irq.h> includes it.
But pcie-microchip-host.c *doesn't* need <linux/of_irq.h> itself. Include
<linux/irqdomain.h> directly to remove this implicit dependency so a future
patch can drop <linux/of_irq.h>.
Link: https://lore.kernel.org/r/20221031153954.1163623-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
pcie-altera-msi.c uses irq_domain_add_linear() and related interfaces, so
it needs <linux/irqdomain.h> but doesn't include it directly; it relies on
the fact that <linux/of_irq.h> includes it.
But pcie-altera-msi.c *doesn't* need <linux/of_irq.h> itself. Include
<linux/irqdomain.h> directly to remove this implicit dependency so a future
patch can drop <linux/of_irq.h>.
Link: https://lore.kernel.org/r/20221031153954.1163623-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Some of the platforms (like Tegra194 and Tegra234) have open slots and
not having an endpoint connected to the slot is not an error.
So, changing the macro from dev_err to dev_info to log the event.
Link: https://lore.kernel.org/r/20220913101237.4337-1-vidyas@nvidia.com
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The local variable 'vector' must be u32 rather than u8: see the
struct hv_msi_desc3.
'vector_count' should be u16 rather than u8: see struct hv_msi_desc,
hv_msi_desc2 and hv_msi_desc3.
Fixes: a2bad844a6 ("PCI: hv: Fix interrupt mapping for multi-MSI")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: Jeffrey Hugo <quic_jhugo@quicinc.com>
Cc: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20221027205256.17678-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
[devm_]gpiod_get_from_of_node in drivers usage should be limited
so that gpiolib can be cleaned up; let's switch to the generic device
property API.
It may even help with handling secondary fwnodes when gpiolib is taught
to handle gpios described by swnodes.
Link: https://lore.kernel.org/r/20220903-gpiod_get_from_of_node-remove-v1-1-b29adfb27a6c@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[lpieralisi@kernel.org: commit log]
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Dual mode DesignWare PCIe IP has PTM capability enabled (if supported) even
in the EP mode. The PCIe compliance for the EP mode expects PTM
capabilities (ROOT_CAPABLE, RES_CAPABLE, CLK_GRAN) be disabled.
Hence disable PTM for the EP mode.
Link: https://lore.kernel.org/r/20220919143340.4527-3-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
commit aeaa0bfe89 ("PCI: dwc: Move N_FTS setup to common setup")
incorrectly uses pci->link_gen in deriving the index to the
n_fts[] array also introducing the issue of accessing beyond the
boundaries of array for greater than Gen-2 speeds. This change fixes
that issue.
Link: https://lore.kernel.org/r/20220926111923.22487-1-vidyas@nvidia.com
Fixes: aeaa0bfe89 ("PCI: dwc: Move N_FTS setup to common setup")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
This reverts commit 8bb7ff12a9.
Commit 8bb7ff12a9 ("PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro")
updated the Tegra PCI driver to use the macro PCI_CONF1_EXT_ADDRESS()
instead of a local function in the Tegra PCI driver. This broke PCI for
some Tegra platforms because, when calculating the offset value, the mask
applied to the lower 8-bits changed from 0xff to 0xfc.
For now, fix this by reverting this commit.
Fixes: 8bb7ff12a9 ("PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro")
Link: https://lore.kernel.org/r/20221017084006.11770-1-jonathanh@nvidia.com
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Call phy_set_mode_ext() to notify the PHY driver that the PHY is being
used in the EP mode.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jingoo Han <jingoohan1@gmail.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/r/20220927092207.161501-6-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Call phy_set_mode_ext() to notify the PHY driver that the PHY is being
used in the RC mode.
Reviewed-by: Jingoo Han <jingoohan1@gmail.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/r/20220927092207.161501-5-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
-----BEGIN PGP SIGNATURE-----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=pOqY
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Resource management:
- Distribute spare resources to unconfigured hotplug bridges at
boot-time (not just when hot-adding such a bridge), which makes
hot-adding devices to docks work better.
- Revert to a BAR assignment inherited from firmware only when the
address is actually reachable via any upstream bridges, which fixes
some cases where firmware doesn't configure all devices.
- Add a sysfs interface to resize BARs so this can be done before
assigning devices to a VM through VFIO.
Power management:
- Disable Precision Time Management for all devices on suspend to
enable lower-power PM state. We previously did this just for Root
Ports, which isn't enough because downstream devices can still
generate PTM messages, which cause errors if it's disabled in the
Root Port.
- Save and restore the ASPM L1 PM Substates configuration for
suspend/ resume. Previously this configuration was lost, so L1.x
states likely stopped working after resume.
- Check whether the L1 PM Substates Capability exists. If it didn't
exist, we previously read junk and tried to configure L1 Substates
based on that.
- Fix the LTR_L1.2_THRESHOLD computation, which previously set a
threshold for entering L1.2 that was too low in some cases.
- Reduce the delay after transitions to or from D3cold by using
usleep_range() rather than msleep(), which often slept for ~19ms
instead of the 10ms normally required. The spec says 10ms is
enough, but it's possible we could trip over devices that need a
little more.
Error handling:
- Work around a BIOS bug that caused Intel Root Ports to advertise a
Root Port Programmed I/O (RP PIO) log size of zero, which caused
annoying warnings and prevented the kernel from dumping log
registers for DPC errors.
Qualcomm PCIe controller driver:
- Add support for SC8280XP and SA8540P host controllers and SM8450
endpoint controller.
- Disable Master AXI clock on endpoint controllers to save power when
link is idle or in L1.x.
- Expose link state transition counts via debugfs to help debug
issues with low-power states.
- Add auto-loading module support.
Synopsys DesignWare PCIe controller driver:
- Remove a dependency on ZONE_DMA32 by allocating the MSI target page
differently. There's more work to do related to eDMA controllers,
so it's not completely settled"
* tag 'pci-v6.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (71 commits)
PCI: qcom-ep: Check platform_get_resource_byname() return value
PCI: qcom-ep: Add support for SM8450 SoC
dt-bindings: PCI: qcom-ep: Add support for SM8450 SoC
dt-bindings: PCI: qcom-ep: Define clocks per platform
PCI: qcom-ep: Make PERST separation optional
dt-bindings: PCI: qcom-ep: Make PERST separation optional
PCI: qcom-ep: Disable Master AXI Clock when there is no PCIe traffic
PCI: Expose PCIe Resizable BAR support via sysfs
PCI/ASPM: Correct LTR_L1.2_THRESHOLD computation
PCI/ASPM: Ignore L1 PM Substates if device lacks capability
PCI/ASPM: Factor out L1 PM Substates configuration
PCI: qcom-ep: Gate Master AXI clock to MHI bus during L1SS
PCI: qcom-ep: Expose link transition counts via debugfs
PCI: qcom-ep: Disable IRQs during driver remove
PCI/ASPM: Save L1 PM Substates Capability for suspend/resume
PCI/ASPM: Refactor L1 PM Substates Control Register programming
PCI: qcom-ep: Make use of the cached dev pointer
PCI: qcom-ep: Rely on the clocks supplied by devicetree
PCI: qcom-ep: Add kernel-doc for qcom_pcie_ep structure
phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on()
...
- Add macros for PCI Configuration Mechanism #1 and use them in the
ftpci100, mt7621, and tegra drivers (Pali Rohár)
* remotes/lorenzo/pci/misc:
PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro
PCI: mt7621: Use PCI_CONF1_EXT_ADDRESS() macro
PCI: ftpci100: Use PCI_CONF1_ADDRESS() macro
PCI: Add standard PCI Config Address macros
- List platforms that use a single MSI host interrupt in qcom DT (Johan
Hovold)
- Add SC8280XP, SA8540P support to qcom DT binding and driver(Johan Hovold)
- Make all optional clocks truly optional in the driver (Johan Hovold)
- Rename per-IP structs to reflect the IP version (Johan Hovold)
- Sort device ID match table by compatible string (Johan Hovold)
- Add MODULE_DEVICE_TABLE to enable module autoloading (Dmitry Baryshkov)
- Drop the unused .post_deinit() callback (Johan Hovold)
- Rely on DT for clock information instead of hard-coding it in the driver
(Manivannan Sadhasivam)
- Disable IRQs when removing driver to avoid spurious IRQs later
(Manivannan Sadhasivam)
- Expose link transition counts via debugfs to help debug issues with
low-power states (Manivannan Sadhasivam)
- Gate Master AXI clock to the MHI bus while in L1 substates to save power
(Manivannan Sadhasivam)
- Disable Master AXI clock to save power when there is no traffic on PCIe
(Manivannan Sadhasivam)
- Make the "PERST separation" debug feature optional in the DT and the
driver (Manivannan Sadhasivam)
- Define clocks to be per-platform in DT to prepare for future SoCs
(Manivannan Sadhasivam)
- Add SM8450 SoC support (Manivannan Sadhasivam)
- Check for platform_get_resource_byname() to avoid a NULL pointer
dereference (Yang Yingliang)
* pci/qcom:
PCI: qcom-ep: Check platform_get_resource_byname() return value
PCI: qcom-ep: Add support for SM8450 SoC
dt-bindings: PCI: qcom-ep: Add support for SM8450 SoC
dt-bindings: PCI: qcom-ep: Define clocks per platform
PCI: qcom-ep: Make PERST separation optional
dt-bindings: PCI: qcom-ep: Make PERST separation optional
PCI: qcom-ep: Disable Master AXI Clock when there is no PCIe traffic
PCI: qcom-ep: Gate Master AXI clock to MHI bus during L1SS
PCI: qcom-ep: Expose link transition counts via debugfs
PCI: qcom-ep: Disable IRQs during driver remove
PCI: qcom-ep: Make use of the cached dev pointer
PCI: qcom-ep: Rely on the clocks supplied by devicetree
PCI: qcom-ep: Add kernel-doc for qcom_pcie_ep structure
PCI: qcom: Rename host-init error label
PCI: qcom: Drop unused post_deinit callback
PCI: qcom-ep: Add MODULE_DEVICE_TABLE
PCI: qcom: Sort device-id table
PCI: qcom: Clean up IP configurations
PCI: qcom: Make all optional clocks optional
PCI: qcom: Add support for SA8540P
PCI: qcom: Add support for SC8280XP
dt-bindings: PCI: qcom: Add SA8540P to binding
dt-bindings: PCI: qcom: Add SC8280XP to binding
dt-bindings: PCI: qcom: Enumerate platforms with single msi interrupt
- Rename the pcie-mediatek-gen3 driver from 'mtk-pcie' to 'mtk-pcie-gen3'
so it can coexist with the pcie-mediatek driver, which also uses
'mtk-pcie' (Felix Fietkau)
* remotes/lorenzo/pci/mediatek:
PCI: mediatek-gen3: Change driver name to mtk-pcie-gen3
- Use dmam_alloc_coherent() instead of dma_map_page() to allocate the MSI
target page, which means dwc drivers will work even when ZONE_DMA32 is
disabled (Will McVicker)
- If we can't allocate an MSI target page with a 32-bit address, try
allocating one with a 64-bit address (Will McVicker)
- Switch from of_gpio_named_count() to generic gpiod_count() (Andy
Shevchenko)
- Add support for i.MX8MP PCIe (Richard Zhu)
- Fix the Freescale i.MX8 PHY driver, which had interchanged the phy_init()
and phy_power_on() interfaces (Richard Zhu)
* remotes/lorenzo/pci/dwc:
phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on()
PCI: imx6: Add i.MX8MP PCIe support
PCI: dwc: Replace of_gpio_named_count() by gpiod_count()
PCI: dwc: Drop dependency on ZONE_DMA32
- In an emulated PCI bridge, set Capability offsets so they match the
hardware offsets shown by U-Boot (Pali Rohár)
* remotes/lorenzo/pci/bridge-emul:
PCI: pci-bridge-emul: Set position of PCI capabilities to real HW value
- Switch from gpiod_get_from_of_node() to generic devm GPIO API (Dmitry
Torokhov)
* remotes/lorenzo/pci/apple:
PCI: apple: Do not leak reset GPIO on unbind/unload/error
If platform_get_resource_byname() fails, 'mmio_res' will be set to NULL
pointer, which causes a NULL pointer dereference when it is used in
qcom_pcie_perst_deassert().
Check the return value to prevent it.
Link: https://lore.kernel.org/r/20220429080740.1294797-1-yangyingliang@huawei.com
Fixes: f55fee56a6 ("PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Add support for SM8450 SoC to the Qualcomm PCIe Endpoint Controller
driver. The driver uses the same config as the existing SDX55 chipset,
so additional settings are not required.
Link: https://lore.kernel.org/r/20220914075350.7992-13-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
PERST separation is an optional debug feature used to collect the crash
dump from the PCIe endpoint devices by the PCIe host when the endpoint
crashes. This feature keeps the PCIe link up by separating the PCIe IP
block from the SoC reset logic.
Make the property optional in the driver.
Link: https://lore.kernel.org/r/20220914075350.7992-10-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The Master AXI clock can be disabled when it is not used i.e., when there
is no traffic on the PCIe bus. This helps to save power during idle state.
[bhelgaas: tidy and wrap comment]
Link: https://lore.kernel.org/r/20220914075350.7992-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Qualcomm PCIe controllers have debug registers in the MMIO region
that count PCIe link transitions. Expose them over debugfs to
userspace to help debug the low power issues.
Link: https://lore.kernel.org/r/20220914075350.7992-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Disable the Global and PERST IRQs during driver remove to avoid getting
spurious IRQs after resource deallocation.
Link: https://lore.kernel.org/r/20220914075350.7992-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
In the qcom_pcie_ep_get_resources() function, dev pointer is already
cached in a local variable. So let's make use of it instead of getting
the dev pointer again from pdev struct.
Link: https://lore.kernel.org/r/20220914075350.7992-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Generally, device drivers should just rely on the platform data like
devicetree to supply the clocks required for the functioning of the
peripheral. There is no need to hardcode the clk info in the driver.
So get rid of the static clk info and obtain the platform supplied
clks.
The total number of clocks supplied is obtained using the
devm_clk_bulk_get_all() API and used for the rest of the clk_bulk_ APIs.
Link: https://lore.kernel.org/r/20220914075350.7992-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Refer to phy_core driver, phy_init() must be called before phy_power_on().
Fix the wrong order of phy_init() and phy_power_on() here.
Link: https://lore.kernel.org/r/1662344583-18874-1-git-send-email-hongxing.zhu@nxp.com
Fixes: 1aa97b0022 ("phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver")
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Add i.MX8MP PCIe support.
To avoid codes duplication when find the syscon regmap, add the iomux
gpr syscon compatible into drvdata.
Link: https://lore.kernel.org/r/1662109086-15881-8-git-send-email-hongxing.zhu@nxp.com
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
As a preparation to unexport of_gpio_named_count(), convert the
driver to use gpiod_count() instead.
Link: https://lore.kernel.org/r/20220830183310.48541-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Drop the unused and confusingly named post_deinit callback that was
added for the now removed pipe clock handling.
If ever needed we can add back a callback named pre_deinit (or perhaps
rather pre_phy_power_off) instead.
Link: https://lore.kernel.org/r/20220928155421.21660-2-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Simplify pci-ftpci100.c driver code and use new PCI_CONF1_ADDRESS() macro
for accessing PCI config space.
Link: https://lore.kernel.org/r/20220924092404.31776-3-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Register with Subsystem Device/Vendor ID is at offset 0x2c.
Export it via the emulated bridge to enable support for the Subsystem
Device/Vendor ID - by reading it in the PCI controller config space and
storing it in the emulated bridge control structures, so that it is
exposed in the respective PCI capability.
After this change Subsystem ID is visible in lspci output at line:
Capabilities: [40] Subsystem
Link: https://lore.kernel.org/r/20220711225915.13896-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
The driver allocates reset GPIO in apple_pcie_setup_port() but neither
releases the resource, nor uses devm API to have it released
automatically.
Let's fix this by switching to devm API. While at it let's use generic
devm_fwnode_gpiod_get() instead of OF-specific gpiod_get_from_of_node()
- this will allow us top stop exporting the latter down the road.
Link: https://lore.kernel.org/r/YxatO5OaI2RpxQ2M@google.com
Fixes: 1e33888fbe ("PCI: apple: Add initial hardware bring-up")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Hector Martin <marcan@marcan.st>
Acked-by: Marc Zyngier <maz@kernel.org>
