Merge branch 'pci/controller/mediatek'

- Use clk_bulk_prepare_enable() instead of separate clk_bulk_prepare() and
  clk_bulk_enable() (Lorenzo Bianconi)

- Rearrange reset assert/deassert so they're both done in the *_power_up()
  callbacks (Lorenzo Bianconi)

- Document that Airoha EN7581 requires PHY init and power-on before PHY
  reset deassert, unlike other MediaTek Gen3 controllers (Lorenzo Bianconi)

- Move Airoha EN7581 post-reset delay from the en7581 clock .enable()
  method to mtk_pcie_en7581_power_up() (Lorenzo Bianconi)

- Sleep instead of delay during Airoha EN7581 power-up, since this is a
  non-atomic context (Lorenzo Bianconi)

- Skip PERST# assertion on Airoha EN7581 during probe and suspend/resume to
  avoid a hardware defect (Lorenzo Bianconi)

- Enable async probe to reduce system startup time (Douglas Anderson)

* pci/controller/mediatek:
  PCI: mediatek-gen3: Enable async probe by default
  PCI: mediatek-gen3: Avoid PCIe resetting via PERST# for Airoha EN7581 SoC
  PCI: mediatek-gen3: Rely on msleep() in mtk_pcie_en7581_power_up()
  PCI: mediatek-gen3: Move reset delay in mtk_pcie_en7581_power_up()
  PCI: mediatek-gen3: Add comment about initialization order in mtk_pcie_en7581_power_up()
  PCI: mediatek-gen3: Move reset/assert callbacks in .power_up()
  PCI: mediatek-gen3: Rely on clk_bulk_prepare_enable() in mtk_pcie_en7581_power_up()

drivers/clk/clk-en7523.c

@@ -477,7 +477,6 @@ static int en7581_pci_enable(struct clk_hw *hw)
 	       REG_PCI_CONTROL_PERSTOUT;
 	val = readl(np_base + REG_PCI_CONTROL);
 	writel(val | mask, np_base + REG_PCI_CONTROL);
-	msleep(250);
 
 	return 0;
 }

drivers/pci/controller/pcie-mediatek-gen3.c

@@ -125,6 +125,8 @@
 
 #define MAX_NUM_PHY_RESETS		3
 
+#define PCIE_MTK_RESET_TIME_US		10
+
 /* Time in ms needed to complete PCIe reset on EN7581 SoC */
 #define PCIE_EN7581_RESET_TIME_MS	100
 
@@ -133,10 +135,18 @@ struct mtk_gen3_pcie;
 #define PCIE_CONF_LINK2_CTL_STS		(PCIE_CFG_OFFSET_ADDR + 0xb0)
 #define PCIE_CONF_LINK2_LCR2_LINK_SPEED	GENMASK(3, 0)
 
+enum mtk_gen3_pcie_flags {
+	SKIP_PCIE_RSTB	= BIT(0), /* Skip PERST# assertion during device
+				   * probing or suspend/resume phase to
+				   * avoid hw bugs/issues.
+				   */
+};
+
 /**
  * struct mtk_gen3_pcie_pdata - differentiate between host generations
  * @power_up: pcie power_up callback
  * @phy_resets: phy reset lines SoC data.
+ * @flags: pcie device flags.
  */
 struct mtk_gen3_pcie_pdata {
 	int (*power_up)(struct mtk_gen3_pcie *pcie);
@@ -144,6 +154,7 @@ struct mtk_gen3_pcie_pdata {
 		const char *id[MAX_NUM_PHY_RESETS];
 		int num_resets;
 	} phy_resets;
+	u32 flags;
 };
 
 /**
@@ -438,22 +449,33 @@ static int mtk_pcie_startup_port(struct mtk_gen3_pcie *pcie)
 	val |= PCIE_DISABLE_DVFSRC_VLT_REQ;
 	writel_relaxed(val, pcie->base + PCIE_MISC_CTRL_REG);
 
-	/* Assert all reset signals */
-	val = readl_relaxed(pcie->base + PCIE_RST_CTRL_REG);
-	val |= PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB | PCIE_PE_RSTB;
-	writel_relaxed(val, pcie->base + PCIE_RST_CTRL_REG);
-
 	/*
-	 * Described in PCIe CEM specification sections 2.2 (PERST# Signal)
-	 * and 2.2.1 (Initial Power-Up (G3 to S0)).
-	 * The deassertion of PERST# should be delayed 100ms (TPVPERL)
-	 * for the power and clock to become stable.
+	 * Airoha EN7581 has a hw bug asserting/releasing PCIE_PE_RSTB signal
+	 * causing occasional PCIe link down. In order to overcome the issue,
+	 * PCIE_RSTB signals are not asserted/released at this stage and the
+	 * PCIe block is reset using en7523_reset_assert() and
+	 * en7581_pci_enable().
 	 */
-	msleep(100);
+	if (!(pcie->soc->flags & SKIP_PCIE_RSTB)) {
+		/* Assert all reset signals */
+		val = readl_relaxed(pcie->base + PCIE_RST_CTRL_REG);
+		val |= PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB |
+		       PCIE_PE_RSTB;
+		writel_relaxed(val, pcie->base + PCIE_RST_CTRL_REG);
 
-	/* De-assert reset signals */
-	val &= ~(PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB | PCIE_PE_RSTB);
-	writel_relaxed(val, pcie->base + PCIE_RST_CTRL_REG);
+		/*
+		 * Described in PCIe CEM specification revision 6.0.
+		 *
+		 * The deassertion of PERST# should be delayed 100ms (TPVPERL)
+		 * for the power and clock to become stable.
+		 */
+		msleep(PCIE_T_PVPERL_MS);
+
+		/* De-assert reset signals */
+		val &= ~(PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB |
+			 PCIE_PE_RSTB);
+		writel_relaxed(val, pcie->base + PCIE_RST_CTRL_REG);
+	}
 
 	/* Check if the link is up or not */
 	err = readl_poll_timeout(pcie->base + PCIE_LINK_STATUS_REG, val,
@@ -913,11 +935,20 @@ static int mtk_pcie_en7581_power_up(struct mtk_gen3_pcie *pcie)
 	u32 val;
 
 	/*
-	 * Wait for the time needed to complete the bulk assert in
-	 * mtk_pcie_setup for EN7581 SoC.
+	 * The controller may have been left out of reset by the bootloader
+	 * so make sure that we get a clean start by asserting resets here.
 	 */
-	mdelay(PCIE_EN7581_RESET_TIME_MS);
+	reset_control_bulk_assert(pcie->soc->phy_resets.num_resets,
+				  pcie->phy_resets);
+	reset_control_assert(pcie->mac_reset);
 
+	/* Wait for the time needed to complete the reset lines assert. */
+	msleep(PCIE_EN7581_RESET_TIME_MS);
+
+	/*
+	 * Unlike the other MediaTek Gen3 controllers, the Airoha EN7581
+	 * requires PHY initialization and power-on before PHY reset deassert.
+	 */
 	err = phy_init(pcie->phy);
 	if (err) {
 		dev_err(dev, "failed to initialize PHY\n");
@@ -940,17 +971,11 @@ static int mtk_pcie_en7581_power_up(struct mtk_gen3_pcie *pcie)
 	 * Wait for the time needed to complete the bulk de-assert above.
 	 * This time is specific for EN7581 SoC.
 	 */
-	mdelay(PCIE_EN7581_RESET_TIME_MS);
+	msleep(PCIE_EN7581_RESET_TIME_MS);
 
 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);
 
-	err = clk_bulk_prepare(pcie->num_clks, pcie->clks);
-	if (err) {
-		dev_err(dev, "failed to prepare clock\n");
-		goto err_clk_prepare;
-	}
-
 	val = FIELD_PREP(PCIE_VAL_LN0_DOWNSTREAM, 0x47) |
 	      FIELD_PREP(PCIE_VAL_LN1_DOWNSTREAM, 0x47) |
 	      FIELD_PREP(PCIE_VAL_LN0_UPSTREAM, 0x41) |
@@ -963,17 +988,22 @@ static int mtk_pcie_en7581_power_up(struct mtk_gen3_pcie *pcie)
 	      FIELD_PREP(PCIE_K_FINETUNE_MAX, 0xf);
 	writel_relaxed(val, pcie->base + PCIE_PIPE4_PIE8_REG);
 
-	err = clk_bulk_enable(pcie->num_clks, pcie->clks);
+	err = clk_bulk_prepare_enable(pcie->num_clks, pcie->clks);
 	if (err) {
 		dev_err(dev, "failed to prepare clock\n");
-		goto err_clk_enable;
+		goto err_clk_prepare_enable;
 	}
 
+	/*
+	 * Airoha EN7581 performs PCIe reset via clk callbacks since it has a
+	 * hw issue with PCIE_PE_RSTB signal. Add wait for the time needed to
+	 * complete the PCIe reset.
+	 */
+	msleep(PCIE_T_PVPERL_MS);
+
 	return 0;
 
-err_clk_enable:
-	clk_bulk_unprepare(pcie->num_clks, pcie->clks);
-err_clk_prepare:
+err_clk_prepare_enable:
 	pm_runtime_put_sync(dev);
 	pm_runtime_disable(dev);
 	reset_control_bulk_assert(pcie->soc->phy_resets.num_resets, pcie->phy_resets);
@@ -990,6 +1020,15 @@ static int mtk_pcie_power_up(struct mtk_gen3_pcie *pcie)
 	struct device *dev = pcie->dev;
 	int err;
 
+	/*
+	 * The controller may have been left out of reset by the bootloader
+	 * so make sure that we get a clean start by asserting resets here.
+	 */
+	reset_control_bulk_assert(pcie->soc->phy_resets.num_resets,
+				  pcie->phy_resets);
+	reset_control_assert(pcie->mac_reset);
+	usleep_range(PCIE_MTK_RESET_TIME_US, 2 * PCIE_MTK_RESET_TIME_US);
+
 	/* PHY power on and enable pipe clock */
 	err = reset_control_bulk_deassert(pcie->soc->phy_resets.num_resets, pcie->phy_resets);
 	if (err) {
@@ -1074,14 +1113,6 @@ static int mtk_pcie_setup(struct mtk_gen3_pcie *pcie)
 	 * counter since the bulk is shared.
 	 */
 	reset_control_bulk_deassert(pcie->soc->phy_resets.num_resets, pcie->phy_resets);
-	/*
-	 * The controller may have been left out of reset by the bootloader
-	 * so make sure that we get a clean start by asserting resets here.
-	 */
-	reset_control_bulk_assert(pcie->soc->phy_resets.num_resets, pcie->phy_resets);
-
-	reset_control_assert(pcie->mac_reset);
-	usleep_range(10, 20);
 
 	/* Don't touch the hardware registers before power up */
 	err = pcie->soc->power_up(pcie);
@@ -1231,10 +1262,12 @@ static int mtk_pcie_suspend_noirq(struct device *dev)
 		return err;
 	}
 
-	/* Pull down the PERST# pin */
-	val = readl_relaxed(pcie->base + PCIE_RST_CTRL_REG);
-	val |= PCIE_PE_RSTB;
-	writel_relaxed(val, pcie->base + PCIE_RST_CTRL_REG);
+	if (!(pcie->soc->flags & SKIP_PCIE_RSTB)) {
+		/* Assert the PERST# pin */
+		val = readl_relaxed(pcie->base + PCIE_RST_CTRL_REG);
+		val |= PCIE_PE_RSTB;
+		writel_relaxed(val, pcie->base + PCIE_RST_CTRL_REG);
+	}
 
 	dev_dbg(pcie->dev, "entered L2 states successfully");
 
@@ -1285,6 +1318,7 @@ static const struct mtk_gen3_pcie_pdata mtk_pcie_soc_en7581 = {
 		.id[2] = "phy-lane2",
 		.num_resets = 3,
 	},
+	.flags = SKIP_PCIE_RSTB,
 };
 
 static const struct of_device_id mtk_pcie_of_match[] = {
@@ -1301,6 +1335,7 @@ static struct platform_driver mtk_pcie_driver = {
 		.name = "mtk-pcie-gen3",
 		.of_match_table = mtk_pcie_of_match,
 		.pm = &mtk_pcie_pm_ops,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
 	},
 };