github-mirror/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux.git synced 2026-05-22 14:12:07 +02:00
Code Issues Actions Packages Projects Releases Wiki Activity Graph

PCI: qcom: Add equalization settings for 16.0 GT/s

Browse Source 
During high data transmission rates such as 16.0 GT/s, there is an
increased risk of signal loss due to poor channel quality and
interference. This can impact receiver's ability to capture signals
accurately.

Hence, as signal compensation is achieved through appropriate lane
equalization, apply lane equalization settings at both transmitter
and receiver which results in an increase in the PCIe signal strength.

While at it, modify the pcie-tegra194 driver to make use of the
common GEN3_EQ_CONTROL_OFF definitions in pcie-designware.h.

Link: https://lore.kernel.org/linux-pci/20240911-pci-qcom-gen4-stability-v7-3-743f5c1fd027@linaro.org
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Shashank Babu Chinta Venkata <quic_schintav@quicinc.com>
[mani: dropped the code refactoring and minor changes]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
This commit is contained in:
Shashank Babu Chinta Venkata 2024-09-11 20:56:28 +05:30 committed by Krzysztof Wilczyński
parent 19a69cbd9d
commit d45736b598
No known key found for this signature in database
GPG Key ID: 7C64768D3DE334E7
9 changed files with 97 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
MAINTAINERS
View File

@ -2728,7 +2728,7 @@ F: drivers/iommu/msm*
F: drivers/mfd/ssbi.c
F: drivers/mmc/host/mmci_qcom*
F: drivers/mmc/host/sdhci-msm.c
F: drivers/pci/controller/dwc/pcie-qcom.c
F: drivers/pci/controller/dwc/pcie-qcom*
F: drivers/phy/qualcomm/
F: drivers/power/*/msm*
F: drivers/reset/reset-qcom-*
@ -17754,6 +17754,7 @@ M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
L: linux-pci@vger.kernel.org
L: linux-arm-msm@vger.kernel.org
S: Maintained
F: drivers/pci/controller/dwc/pcie-qcom-common.c
F: drivers/pci/controller/dwc/pcie-qcom.c
PCIE DRIVER FOR ROCKCHIP
@ -17790,6 +17791,7 @@ L: linux-pci@vger.kernel.org
L: linux-arm-msm@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
F: drivers/pci/controller/dwc/pcie-qcom-common.c
F: drivers/pci/controller/dwc/pcie-qcom-ep.c
PCMCIA SUBSYSTEM

5
drivers/pci/controller/dwc/Kconfig
View File

@ -265,12 +265,16 @@ config PCIE_DW_PLAT_EP
order to enable device-specific features PCI_DW_PLAT_EP must be
selected.
config PCIE_QCOM_COMMON
bool
config PCIE_QCOM
bool "Qualcomm PCIe controller (host mode)"
depends on OF && (ARCH_QCOM || COMPILE_TEST)
depends on PCI_MSI
select PCIE_DW_HOST
select CRC8
select PCIE_QCOM_COMMON
help
Say Y here to enable PCIe controller support on Qualcomm SoCs. The
PCIe controller uses the DesignWare core plus Qualcomm-specific
@ -281,6 +285,7 @@ config PCIE_QCOM_EP
depends on OF && (ARCH_QCOM || COMPILE_TEST)
depends on PCI_ENDPOINT
select PCIE_DW_EP
select PCIE_QCOM_COMMON
help
Say Y here to enable support for the PCIe controllers on Qualcomm SoCs
to work in endpoint mode. The PCIe controller uses the DesignWare core

1
drivers/pci/controller/dwc/Makefile
View File

@ -12,6 +12,7 @@ obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o
obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
obj-$(CONFIG_PCI_LAYERSCAPE_EP) += pci-layerscape-ep.o
obj-$(CONFIG_PCIE_QCOM_COMMON) += pcie-qcom-common.o
obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
obj-$(CONFIG_PCIE_QCOM_EP) += pcie-qcom-ep.o
obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o

13
drivers/pci/controller/dwc/pcie-designware.h
View File

@ -125,6 +125,19 @@
#define GEN3_RELATED_OFF_GEN3_EQ_DISABLE BIT(16)
#define GEN3_RELATED_OFF_RATE_SHADOW_SEL_SHIFT 24
#define GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK GENMASK(25, 24)
#define GEN3_RELATED_OFF_RATE_SHADOW_SEL_16_0GT 0x1
#define GEN3_EQ_CONTROL_OFF 0x8A8
#define GEN3_EQ_CONTROL_OFF_FB_MODE GENMASK(3, 0)
#define GEN3_EQ_CONTROL_OFF_PHASE23_EXIT_MODE BIT(4)
#define GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC GENMASK(23, 8)
#define GEN3_EQ_CONTROL_OFF_FOM_INC_INITIAL_EVAL BIT(24)
#define GEN3_EQ_FB_MODE_DIR_CHANGE_OFF 0x8AC
#define GEN3_EQ_FMDC_T_MIN_PHASE23 GENMASK(4, 0)
#define GEN3_EQ_FMDC_N_EVALS GENMASK(9, 5)
#define GEN3_EQ_FMDC_MAX_PRE_CUSROR_DELTA GENMASK(13, 10)
#define GEN3_EQ_FMDC_MAX_POST_CUSROR_DELTA GENMASK(17, 14)
#define PCIE_PORT_MULTI_LANE_CTRL 0x8C0
#define PORT_MLTI_UPCFG_SUPPORT BIT(7)

47
drivers/pci/controller/dwc/pcie-qcom-common.c Normal file
View File

@ -0,0 +1,47 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <linux/pci.h>
#include "pcie-designware.h"
#include "pcie-qcom-common.h"
void qcom_pcie_common_set_16gt_equalization(struct dw_pcie *pci)
{
u32 reg;
/*
* GEN3_RELATED_OFF register is repurposed to apply equalization
* settings at various data transmission rates through registers namely
* GEN3_EQ_*. The RATE_SHADOW_SEL bit field of GEN3_RELATED_OFF
* determines the data rate for which these equalization settings are
* applied.
*/
reg = dw_pcie_readl_dbi(pci, GEN3_RELATED_OFF);
reg &= ~GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL;
reg &= ~GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK;
reg |= FIELD_PREP(GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK,
GEN3_RELATED_OFF_RATE_SHADOW_SEL_16_0GT);
dw_pcie_writel_dbi(pci, GEN3_RELATED_OFF, reg);
reg = dw_pcie_readl_dbi(pci, GEN3_EQ_FB_MODE_DIR_CHANGE_OFF);
reg &= ~(GEN3_EQ_FMDC_T_MIN_PHASE23 |
GEN3_EQ_FMDC_N_EVALS |
GEN3_EQ_FMDC_MAX_PRE_CUSROR_DELTA |
GEN3_EQ_FMDC_MAX_POST_CUSROR_DELTA);
reg |= FIELD_PREP(GEN3_EQ_FMDC_T_MIN_PHASE23, 0x1) |
FIELD_PREP(GEN3_EQ_FMDC_N_EVALS, 0xd) |
FIELD_PREP(GEN3_EQ_FMDC_MAX_PRE_CUSROR_DELTA, 0x5) |
FIELD_PREP(GEN3_EQ_FMDC_MAX_POST_CUSROR_DELTA, 0x5);
dw_pcie_writel_dbi(pci, GEN3_EQ_FB_MODE_DIR_CHANGE_OFF, reg);
reg = dw_pcie_readl_dbi(pci, GEN3_EQ_CONTROL_OFF);
reg &= ~(GEN3_EQ_CONTROL_OFF_FB_MODE |
GEN3_EQ_CONTROL_OFF_PHASE23_EXIT_MODE |
GEN3_EQ_CONTROL_OFF_FOM_INC_INITIAL_EVAL |
GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC);
dw_pcie_writel_dbi(pci, GEN3_EQ_CONTROL_OFF, reg);
}
EXPORT_SYMBOL_GPL(qcom_pcie_common_set_16gt_equalization);

13
drivers/pci/controller/dwc/pcie-qcom-common.h Normal file
View File

@ -0,0 +1,13 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#ifndef _PCIE_QCOM_COMMON_H
#define _PCIE_QCOM_COMMON_H
struct dw_pcie;
void qcom_pcie_common_set_16gt_equalization(struct dw_pcie *pci);
#endif

4
drivers/pci/controller/dwc/pcie-qcom-ep.c
View File

@ -25,6 +25,7 @@
#include "../../pci.h"
#include "pcie-designware.h"
#include "pcie-qcom-common.h"
/* PARF registers */
#define PARF_SYS_CTRL 0x00
@ -486,6 +487,9 @@ static int qcom_pcie_perst_deassert(struct dw_pcie *pci)
goto err_disable_resources;
}
if (pcie_link_speed[pci->max_link_speed] == PCIE_SPEED_16_0GT)
qcom_pcie_common_set_16gt_equalization(pci);
/*
* The physical address of the MMIO region which is exposed as the BAR
* should be written to MHI BASE registers.

4
drivers/pci/controller/dwc/pcie-qcom.c
View File

@ -35,6 +35,7 @@
#include "../../pci.h"
#include "pcie-designware.h"
#include "pcie-qcom-common.h"
/* PARF registers */
#define PARF_SYS_CTRL 0x00
@ -295,6 +296,9 @@ static int qcom_pcie_start_link(struct dw_pcie *pci)
{
struct qcom_pcie *pcie = to_qcom_pcie(pci);
if (pcie_link_speed[pci->max_link_speed] == PCIE_SPEED_16_0GT)
qcom_pcie_common_set_16gt_equalization(pci);
/* Enable Link Training state machine */
if (pcie->cfg->ops->ltssm_enable)
pcie->cfg->ops->ltssm_enable(pcie);

19
drivers/pci/controller/dwc/pcie-tegra194.c
View File

@ -177,11 +177,6 @@
#define N_FTS_VAL 52
#define FTS_VAL 52
#define GEN3_EQ_CONTROL_OFF 0x8a8
#define GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC_SHIFT 8
#define GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC_MASK GENMASK(23, 8)
#define GEN3_EQ_CONTROL_OFF_FB_MODE_MASK GENMASK(3, 0)
#define PORT_LOGIC_AMBA_ERROR_RESPONSE_DEFAULT 0x8D0
#define AMBA_ERROR_RESPONSE_CRS_SHIFT 3
#define AMBA_ERROR_RESPONSE_CRS_MASK GENMASK(1, 0)
@ -861,9 +856,9 @@ static void config_gen3_gen4_eq_presets(struct tegra_pcie_dw *pcie)
dw_pcie_writel_dbi(pci, GEN3_RELATED_OFF, val);
val = dw_pcie_readl_dbi(pci, GEN3_EQ_CONTROL_OFF);
val &= ~GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC_MASK;
val |= (0x3ff << GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC_SHIFT);
val &= ~GEN3_EQ_CONTROL_OFF_FB_MODE_MASK;
val &= ~GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC;
val |= FIELD_PREP(GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC, 0x3ff);
val &= ~GEN3_EQ_CONTROL_OFF_FB_MODE;
dw_pcie_writel_dbi(pci, GEN3_EQ_CONTROL_OFF, val);
val = dw_pcie_readl_dbi(pci, GEN3_RELATED_OFF);
@ -872,10 +867,10 @@ static void config_gen3_gen4_eq_presets(struct tegra_pcie_dw *pcie)
dw_pcie_writel_dbi(pci, GEN3_RELATED_OFF, val);
val = dw_pcie_readl_dbi(pci, GEN3_EQ_CONTROL_OFF);
val &= ~GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC_MASK;
val |= (pcie->of_data->gen4_preset_vec <<
GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC_SHIFT);
val &= ~GEN3_EQ_CONTROL_OFF_FB_MODE_MASK;
val &= ~GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC;
val |= FIELD_PREP(GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC,
pcie->of_data->gen4_preset_vec);
val &= ~GEN3_EQ_CONTROL_OFF_FB_MODE;
dw_pcie_writel_dbi(pci, GEN3_EQ_CONTROL_OFF, val);
val = dw_pcie_readl_dbi(pci, GEN3_RELATED_OFF);