Disable VCN reset capability for the program 4 as it's
causing regressions.
Fixes: 9d20f37a10 ("drm/amd/pm: Add VCN reset support for SMU v13.0.6")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PMFW interface version is not used by some IP implementations like SMU
v13.0.6/12, instead rely on PMFW version checks. Avoid the log if
interface version is not used.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds support for VCN reset functionality in SMU v13.0.12 by:
1. Adding two new PPSMC messages in smu_v13_0_12_ppsmc.h:
- PPSMC_MSG_ResetVCN (0x5E)
- Updates PPSMC_Message_Count to 0x5F to account for new messages
2. Adding message mapping for ResetVCN in smu_v13_0_12_ppt.c:
- Maps SMU_MSG_ResetVCN to PPSMC_MSG_ResetVCN
These changes enable proper VCN reset handling through the SMU firmware
interface for compatible AMD GPUs.
v2: Added fw version check to support vcn queue reset.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Sonny Jiang <sonny.jiang@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Place the smu 13.0.0 pptable header in the correct folder
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Mangesh Gadre <mangesh.gadre@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable npm metrics data for smu_v13_0_12
v3: Add node id check for setting NPM_CAPS (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fetch npm data from system metrics table for smu_v13_0_12
v3: Remove intermittent type for npm data, remove node id check,
move npm caps check to npm_get_data function (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add sysfs node to expose node power limit for smu_v13_0_12
v2: Remove support check from visible function (Kevin)
v3: Update comments (Kevin)
Remove sysfs remove file, change format specifier
for sysfs_emit, use attribute_group.name (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow fetching system metrics table in 1VF mode
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update pmfw headers for smu_v13_0_12 to include node power limit
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename amdgpu_hwmon_get_sensor_generic to use for generic pm
interfaces
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If OD is not enabled then restoring cached clock settings doesn't make
sense and actually leads to errors in resume.
Check if enabled before restoring settings.
Fixes: 4e9526924d ("drm/amd: Restore cached manual clock settings during resume")
Reported-by: Jérôme Lécuyer <jerome.4a4c@gmail.com>
Closes: https://lore.kernel.org/amd-gfx/0ffe2692-7bfa-4821-856e-dd0f18e2c32b@amd.com/T/#me6db8ddb192626360c462b7570ed7eba0c6c9733
Suggested-by: Jérôme Lécuyer <jerome.4a4c@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The I2C init for V14_0_2 uses i2c_add_adapter() and i2c_del_adapter(),
this commit replaces the use of these two functions with
devm_i2c_add_adapter(). Notice that V14_0_2 init initializes multiple
I2C buses in a loop; if something goes wrong, the previous adapters are
removed, and the amdgpu load is interrupted. Since I2C init is required
for the correct load of amdgpu, it is safe to rely on
devm_i2c_add_adapter() to handle any previously initialized I2C adapter.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The I2C init for V13_0_6 uses i2c_add_adapter() and i2c_del_adapter(),
this commit replaces the use of these two functions with
devm_i2c_add_adapter(). Notice that V13_0_6 init initializes multiple
I2C buses in a loop; if something goes wrong, the previous adapters are
removed, and the amdgpu load is interrupted. Since I2C init is required
for the correct load of amdgpu, it is safe to rely on
devm_i2c_add_adapter() to handle any previously initialized I2C adapter.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The I2C init for SMU_V13 uses i2c_add_adapter() and i2c_del_adapter(),
this commit replaces the use of these two functions with
devm_i2c_add_adapter(). Notice that SMU_V13 init initializes multiple
I2C buses in a loop; if something goes wrong, the previous adapters are
removed, and the amdgpu load is interrupted. Since I2C init is required
for the correct load of amdgpu, it is safe to rely on
devm_i2c_add_adapter() to handle any previously initialized I2C adapter.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The I2C init for Sienna Cichlid uses i2c_add_adapter() and
i2c_del_adapter(), this commit replaces the use of these two functions
with devm_i2c_add_adapter(). Notice that Sienna Cichlid init initializes
multiple I2C buses in a loop; if something goes wrong, the previous
adapters are removed, and the amdgpu load is interrupted. Since I2C init
is required for the correct load of amdgpu, it is safe to rely on
devm_i2c_add_adapter() to handle any previously initialized I2C adapter.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The I2C init for Navi10 uses i2c_add_adapter() and i2c_del_adapter(),
this commit replaces the use of these two functions with
devm_i2c_add_adapter(). Notice that Navi10 init initializes multiple I2C
buses in a loop; if something goes wrong, the previous adapters are
removed, and the amdgpu load is interrupted. Since I2C init is required
for the correct load of amdgpu, it is safe to rely on
devm_i2c_add_adapter() to handle any previously initialized I2C adapter.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The I2C init for Arcturus uses i2c_add_adapter() and i2c_del_adapter(),
this commit replaces the use of these two functions with
devm_i2c_add_adapter(). Notice that Arcturus init initializes multiple
I2C buses in a loop; if something goes wrong, the previous adapters are
removed, and the amdgpu load is interrupted. Since I2C init is required
for the correct load of amdgpu, it is safe to rely on
devm_i2c_add_adapter() to handle any previously initialized I2C adapter.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of using i2c_add_adapter() and i2c_del_adapter(), replace them
with devm_i2c_add_adapter() to simplify the i2c logic.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smu_hw_init() and smu_hw_fini() call smu_dpm_set_vpe_enable() for
APUs as part of startup and teardown. These calls however are
not necessary because vpe_hw_init()/vpe_hw_fini() will call at
init/fini:
```
vpe_hw_init() / vpe_hw_fini()
amdgpu_device_ip_set_powergating_state()
vpe_set_powergating_state()
amdgpu_dpm_enable_vpe()
amdgpu_dpm_set_powergating_by_smu()
smu_dpm_set_power_gate()
smu_dpm_set_vpe_enable()
```
Drop the extra calls.
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
unified vcn reset smu feature cap
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
unified sdma reset smu feature cap
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
unified link reset smu feature cap
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add a unified interface to provide smu feature cap set.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow setting power cap for smu_v13_0_6 in 1vf mode
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This code isn't needed anymore as we collect the same information
into pm_display_cfg instead.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit is necessary for DC to function well with chips
that use the legacy power management code, ie. SI and KV.
Communicate display information from DC to the legacy PM code.
Currently DC uses pm_display_cfg to communicate power management
requirements from the display code to the DPM code.
However, the legacy (non-DC) code path used different fields
and therefore could not take into account anything from DC.
Change the legacy display code to fill the same pm_display_cfg
struct as DC and use the same in the legacy DPM code.
To ease review and reduce churn, this commit does not yet
delete the now unneeded code, that is done in the next commit.
v2:
Rebase.
Fix single_display in amdgpu_dpm_pick_power_state.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
move smu_set_temp_funcs() into smu_v13.0.6 ppt.c file to keep same code
layer in amdgpu_smu.c. (only set_ppt func in amdgpu_smu.c)
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement caching separately for SystemMetrics table from PMFW. The same
table could be used for multiple interfaces. Hence, cache it internally
to avoid multiple queries to the firmware. For SystemMetrics table, 5ms
cache interval is sufficient.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1:
Returns different error codes based on the scenario to help the user app understand
the AMDGPU device status when an exception occurs.
v2:
change -NODEV to -EBUSY.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use int instead of uint32_t for 'ret' variable to store negative error
codes or zero returned by other functions.
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but can be confusing. Additionally, assigning negative error
codes to unsigned type may trigger a GCC warning when the -Wsign-conversion
flag is enabled.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code. Swap variable positions
on either side of '==' to enhance readability.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code. Swap variable positions
on either side of '!=' to enhance readability.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They are part of a power state too and should be printed
alongside the rest of the data from the power state.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Port of commit 227545b9a0 ("drm/radeon/dpm: Disable sclk
switching on Oland when two 4K 60Hz monitors are connected")
This is an ad-hoc DPM fix, necessary because we don't have
proper bandwidth calculation for DCE 6.
We define "high pixelclock" for SI as higher than necessary
for 4K 30Hz. For example, 4K 60Hz and 1080p 144Hz fall into
this category.
When two high pixel clock displays are connected to Oland,
additionally disable shader clock switching, which results in
a higher voltage, thereby addressing some visible flickering.
v2:
Add more comments.
v3:
Split into two commits for easier review.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
According to pp_pm_compute_clocks the non-DC display code
has "issues with mclk switching with refresh rates over 120 hz".
The workaround is to disable MCLK switching in this case.
Do the same for legacy DPM.
Fixes: 6ddbd37f10 ("drm/amd/pm: optimize the amdgpu_pm_compute_clocks() implementations")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some parts of the code base expect that MCLK switching is turned
off when the vblank time is set to zero.
According to pp_pm_compute_clocks the non-DC code has issues
with MCLK switching with refresh rates over 120 Hz.
v3:
Add code comment to explain this better.
Add an if statement instead of changing the switch_limit.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Based on some comments in dm_pp_display_configuration
above the crtc_index and line_time fields, these values
are programmed to the SMC to work around an SMC hang
when it switches MCLK.
According to Alex, the Windows driver programs them to:
mclk_change_block_cp_min = 200 / line_time
mclk_change_block_cp_max = 100 / line_time
Let's use the same for the sake of consistency.
Previously we used the watermark values, but it seemed buggy
as the code was mixing up low/high and A/B watermarks, and
was not saving a low watermark value on DCE 6, so
mclk_change_block_cp_max would be always zero previously.
Split this change off from the previous si_upload_smc_data
to make it easier to bisect, in case it causes any issues.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The si_upload_smc_data function uses si_write_smc_soft_register
to set some register values in the SMC, and expects the result
to be PPSMC_Result_OK which is 1.
The PPSMC_Result_OK / PPSMC_Result_Failed values are used for
checking the result of a command sent to the SMC.
However, the si_write_smc_soft_register actually doesn't send
any commands to the SMC and returns zero on success,
so this check was incorrect.
Fix that by not checking the return value, just like other
calls to si_write_smc_soft_register.
v3:
Additionally, when no display is plugged in, there is no need
to restrict MCLK switching, so program the registers to zero.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The SMC can take an excessive amount of time to process some
messages under some conditions.
Background:
Sending a message to the SMC works by writing the message into
the mmSMC_MESSAGE_0 register and its optional parameter into
the mmSMC_SCRATCH0, and then polling mmSMC_RESP_0. Previously
the timeout was AMDGPU_MAX_USEC_TIMEOUT, ie. 100 ms.
Increase the timeout to 200 ms for all messages and to 1 sec for
a few messages which I've observed to be especially slow:
PPSMC_MSG_NoForcedLevel
PPSMC_MSG_SetEnabledLevels
PPSMC_MSG_SetForcedLevels
PPSMC_MSG_DisableULV
PPSMC_MSG_SwitchToSwState
This fixes the following problems on Tahiti when switching
from a lower clock power state to a higher clock state, such
as when DC turns on a display which was previously turned off.
* si_restrict_performance_levels_before_switch would fail
(if the user previously forced high clocks using sysfs)
* si_set_sw_state would fail (always)
It turns out that both of those failures were SMC timeouts and
that the SMC actually didn't fail or hang, just needs more time
to process those.
Add a warning when there is an SMC timeout to make it easier to
identify this type of problem in the future.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Always send PPSMC_MSG_DisableULV to the SMC, even if ULV mode
is unsupported, to make sure it is properly turned off.
v3:
Simplify si_disable_ulv further.
Always check the return value of amdgpu_si_send_msg_to_smc.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use __free(kfree) for memory alloc cleanups in SMUv13.0.6
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the PPSMC_MSG_GetPptLimit msg is not valid for gfx 11.0.3 on vf mode,
so skiped to create power1_cap* hwmon sysfs node.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the conditions for setting the SMU vcn reset caps in the SMU v13.0.6 PPT
initialization function. Specifically:
- Add support for VCN reset capability for firmware versions 0x00558200 and
above when the program version is 0.
- Add support for VCN reset capability for firmware versions 0x05551800 and
above when the program version is 5.
v2: correct the smu mp1 version for program 5 (Lijo)
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for dpc to the product
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for dpc to a series of products
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Take into account the limits from the vbios. Ported
from the SMU13 code.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4352
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit implements VCN reset capability for SMU v13.0.6 with the following changes:
1. Added new PPSMC message ID (0x5B) for VCN reset in SMU firmware interface
2. Extended SMU capabilities to include VCN_RESET support
3. Implemented VCN reset support check:
- Added smu_v13_0_6_reset_vcn_is_supported() function
4. Updated SMU v13.0.6 PPT functions to include VCN reset operations
v2: clean up debug info (Alex)
v3: remove unsupported message and split smu v13.0.6 changes to a separate patch (Lijo)
v4: simply the function (smu_v13_0_6_reset_vcn_is_supported) (Lijo)
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change introduces infrastructure to check whether VCN reset
is supported by the SMU firmware. Key changes include:
1. Added new functions to query VCN reset support:
- amdgpu_dpm_reset_vcn_is_supported()
- smu_reset_vcn_is_supported()
- pptable_funcs.reset_vcn_is_supported callback
2. Implemented proper locking in the DPM layer with mutex protection
3. Maintained consistency with existing SDMA reset support checks
The new capability allows callers to check for VCN reset support
before attempting the operation, preventing unnecessary attempts
on unsupported platforms.
v2: clean up debug info(Alex)
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fetch and store the unique ids for AIDs/XCDs in SMUv13.0.12 SOCs.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add table caching logic to temperature metrics tables in SMUv13.0.12
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add caching logic for baseboard and gpuboard temperature metrics tables.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove caching logic of temperature metrics from SMUv13.0.12. The
caching logic needs to be moved to a higher level.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fetch and store the unique ids for AIDs/XCDs in SMUv13.0.6 SOCs.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The bad pages threshold exceed CPER should be generated once threshold
exceeded, no matter the bad_page_threshold setted or not.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable temperature metrics caps for smu_v13_0_12
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fetch system metrics table to fill gpuboard/baseboard temperature
metrics data for smu_v13_0_12
v2: Remove unnecessary checks, used separate metrics time for
temperature metrics table(Lijo)
v3: Use cached values for back to back system metrics query(Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update pmfw header for smu_v13_0_12 with system temperature metrics
table
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add smu interface to get baseboard/gpuboard temperature metrics
v2: Rename is_support to is_supported(Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add dpm interface to get gpuboard/baseboard temperature metrics
v2: Add temperature metrics support check(Lijo)
v3: Return error code in case of operation not supported(Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Certain messages will processed with high priority by PMFW even if it
hasn't responded to a previous message. Send the priority message
regardless of the success/fail status of the previous message. Add
support on SMUv13.0.6 and SMUv13.0.12
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add PMFW version check for static table support on SMU v13.0.6 VFs.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow statics metrics table to be queried on SMUv13.0.6 SOCs in VF mode.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cached metrics data validity is 1ms on arcturus. It's not reasonable for
any client to query gpu_metrics at a faster rate and constantly
interrupt PMFW.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cached metrics data validity is 1ms on aldebaran. It's not reasonable
for any client to query gpu_metrics at a faster rate and constantly
interrupt PMFW.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the SCLK limits have been set before S3 they will not
be restored. The limits are however cached in the driver and so
they can be restored by running a commit sequence during resume.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250725031222.3015095-3-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The power limit will be cached in smu->current_power_limit but
if the ASIC goes into S3 this value won't be restored.
Restore the value during SMU resume.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250725031222.3015095-2-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cached metrics data validity is 1ms on SMUv13.0.6 SOCs. It's not
reasonable for any client to query gpu_metrics at a faster rate and
constantly interrupt PMFW.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If dpm tables are already populated on SMU v13.0.6 SOCs, use the cached
data. Otherwise, fetch values from firmware.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Writing a string without delimiters (' ', '\n', '\0') to the under
gpu_od/fan_ctrl sysfs or pp_power_profile_mode for the CUSTOM profile
will result in a null pointer dereference.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4401
Signed-off-by: Umio Yasuno <coelacanth_dream@protonmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove unnecessary variable ret from smu_v13_0_12_get_smu_metrics_data
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507150618.WOfvWsQF-lkp@intel.com
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PMFW interface to get max/min frequencies is not available on aldebaran
VFs. Use data, if available, in DPM tables to get the max/min
frequencies.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a small typo in phm_wait_on_indirect_register().
Swap mask and value arguments provided to phm_wait_on_register() so that
they satisfy the function signature and actual usage scheme.
Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool.
In practice this doesn't fix any issues because the only place this
function is used uses the same value for the value and mask.
Fixes: 3bace35914 ("drm/amd/powerplay: add hardware manager sub-component")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pass amdgpu device context instead of drm device context to some
amdgpu_device_* functions. DRM device context is not required in those
functions. No functional change.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm_*() macros can show the device a message came from.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Cc: Alexandre Demers <alexandre.f.demers@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250627143432.3222843-3-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm_*() macros can show the device a message came from.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Cc: Alexandre Demers <alexandre.f.demers@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250627143432.3222843-2-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
legacy-pm, kv-dpm and si-dpm have prints while changing power states
that don't have a level and thus are printed by default. These are
not useful at runtime for most people, so decrease them to debug.
Reported-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4322
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250627143432.3222843-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On SMU v13.0.12 SOCs, fetch the max values of xgmi speed/width from
firmware.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
revise the pcie dpm parameters
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to set ISP clocks for SMU v14.0.0. ISP driver
uses amdgpu_dpm_set_soft_freq_range() API to set clocks via
SMU interface than communicating with PMFW directly.
amdgpu_dpm_set_soft_freq_range() is updated to take in any
pp_clock_type than limiting to support only PP_SCLK to allow
ISP and other driver modules to set the min/max clocks. Any
clock specific restrictions are expected to be taken care in
SOC specific SMU implementations instead of generic amdgpu_dpm
and amdgpu_smu interfaces.
Reviewed-by: Xiaojian Du <xiaojian.du@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to set ISP power for SMU v14.0.0. ISP driver
uses amdgpu_dpm_set_powergating_by_smu() API to
enable / disable power via SMU interface than communicating
with PMFW directly.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On SMUv13.0.6 SOCs, fetch the max values of xgmi speed/width from
firmware.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In case of unexpected errors, check if device is alive on the bus.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to report PLDM firmware version and board voltage on SMU
v13.0.12 SOCs.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update PMFW metrics table definition to version 0x13
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
move the dpm table setting back after featureenablemend due to dependancy.
For SMUv13.0.6, there is no pptable. Those frequency tables are available
through FW metrics and it needs DPM to be enabled.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
typecheck creates local variables based on the type passed. That could
result in stack frame size warnings like below in certain configs:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0_6_ppt.c:2885:1: error: the frame size of 8304 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
Checking against the pointer type is sufficient for the purpose of
getting a diagnostic message during build time.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Palmer Dabbelt <palmer@dabbelt.com>
Tested-by: Palmer Dabbelt <palmer@dabbelt.com>
Link: https://lore.kernel.org/r/20250610212141.19445-1-palmer@dabbelt.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Several other ASICs allow printing OD SCLK levels without setting DPM
control to manual. When OD is disabled it will show the range the
hardware supports. When OD is enabled it will show what values have been
programmed. Adjust Renoir to work the same.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250609031227.479079-2-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Several other ASICs allow printing OD SCLK levels without setting DPM
control to manual. When OD is disabled it will show the range the
hardware supports. When OD is enabled it will show what values have
been programmed. Adjust VanGogh to work the same.
Cc: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com>
Reported-by: Vicki Pfau <vi@endrift.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250609031227.479079-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update pcie dpm parameters before smu feature enablement
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
override pcie dpm parameters only if it is necessary
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SMU v13.0.6 SOCs, always show default clock levels for gfx in
pp_dpm_sclk. Any custom min/max levels set by user will be available in
pp_od_clk_voltage
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add amdgpu_bo_fb_aper_addr() and update the cached GPU addresses to use
the FB aperture address for SMU and PSP.
2 reasons for this change:
1. when pdb0 is enabled, gpu addr from amdgpu_bo_create_kernel() is GART
aperture address, it is not compatible with SMU and PSP, it need to be
updated to use FB aperture address.
2. Since FB aperture address will change after switching to new GPU
index after hibernation, it need to be updated on resume.
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Users have reported that they have to reduce the level of undervolting
to acheive stability when dynamic workload profiles are enabled on
GC 10.3.x. Disable dynamic workload profiles if the user has enabled
OD.
Fixes: b9467983b7 ("drm/amdgpu: add dynamic workload profile switching for gfx10")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4262
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.15.x
Enable static metrics support to fetch board voltage and pldm version
for smu_v13_0_14
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable static metrics support to fetch board voltage and pldm version
for other smu_v13_0_6 program
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Optimize get gpu metrics data function for smu_v13_0_12 to
allocate metrics structure only once
v2: Free and alloc moved to same function(Kevin)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- remove disgusting turds
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
-----BEGIN PGP SIGNATURE-----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=jpVr
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"As part of building up nova-core/nova-drm pieces we've brought in some
rust abstractions through this tree, aux bus being the main one, with
devres changes also in the driver-core tree. Along with the drm core
abstractions and enough nova-core/nova-drm to use them. This is still
all stub work under construction, to build the nova driver upstream.
The other big NVIDIA related one is nouveau adds support for
Hopper/Blackwell GPUs, this required a new GSP firmware update to
570.144, and a bunch of rework in order to support multiple fw
interfaces.
There is also the introduction of an asahi uapi header file as a
precursor to getting the real driver in later, but to unblock
userspace mesa packages while the driver is trapped behind rust
enablement.
Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe,
and msm being the main ones, and some changes to vsprintf.
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
* tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits)
drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr()
drm/xe: Default auto_link_downgrade status to false
drm/xe/guc: Make creation of SLPC debugfs files conditional
drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue()
drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read
drm/i915/ptl: Use everywhere the correct DDI port clock select mask
drm/nouveau/kms: add support for GB20x
drm/dp: add option to disable zero sized address only transactions.
drm/nouveau: add support for GB20x
drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle
drm/nouveau: add support for GB10x
drm/nouveau/gf100-: track chan progress with non-WFI semaphore release
drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA
drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos
drm/nouveau: add support for GH100
drm/nouveau: improve handling of 64-bit BARs
drm/nouveau/gv100-: switch to volta semaphore methods
drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES
drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY
drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM
...
Changes
-------
* Reduce open-coded use of ratelimit_state structure fields.
* Convert the ->missed field to atomic_t.
* Count misses that are due to lock contention.
* Eliminate jiffies=0 special case.
* Reduce ___ratelimit() false-positive rate limiting (Petr Mladek).
* Allow zero ->burst to hard-disable rate limiting.
* Optimize away atomic operations when a miss is guaranteed.
* Warn if ->interval or ->burst are negative (Petr Mladek).
* Simplify the resulting code.
A smoke test and stress test have been created, but they are not yet ready
for mainline. With luck, we will offer them for the v6.17 merge window.
-----BEGIN PGP SIGNATURE-----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=ivk+
-----END PGP SIGNATURE-----
Merge tag 'ratelimit.2025.05.25a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull rate-limit updates from Paul McKenney:
"lib/ratelimit: Reduce false-positive and silent misses:
- Reduce open-coded use of ratelimit_state structure fields.
- Convert the ->missed field to atomic_t.
- Count misses that are due to lock contention.
- Eliminate jiffies=0 special case.
- Reduce ___ratelimit() false-positive rate limiting (Petr Mladek).
- Allow zero ->burst to hard-disable rate limiting.
- Optimize away atomic operations when a miss is guaranteed.
- Warn if ->interval or ->burst are negative (Petr Mladek).
- Simplify the resulting code.
A smoke test and stress test have been created, but they are not yet
ready for mainline. With luck, we will offer them for the v6.17 merge
window"
* tag 'ratelimit.2025.05.25a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
ratelimit: Drop redundant accesses to burst
ratelimit: Use nolock_ret restructuring to collapse common case code
ratelimit: Use nolock_ret label to collapse lock-failure code
ratelimit: Use nolock_ret label to save a couple of lines of code
ratelimit: Simplify common-case exit path
ratelimit: Warn if ->interval or ->burst are negative
ratelimit: Avoid atomic decrement under lock if already rate-limited
ratelimit: Avoid atomic decrement if already rate-limited
ratelimit: Don't flush misses counter if RATELIMIT_MSG_ON_RELEASE
ratelimit: Force re-initialization when rate-limiting re-enabled
ratelimit: Allow zero ->burst to disable ratelimiting
ratelimit: Reduce ___ratelimit() false-positive rate limiting
ratelimit: Avoid jiffies=0 special case
ratelimit: Count misses due to lock contention
ratelimit: Convert the ->missed field to atomic_t
drm/amd/pm: Avoid open-coded use of ratelimit_state structure's internals
drm/i915: Avoid open-coded use of ratelimit_state structure's ->missed field
random: Avoid open-coded use of ratelimit_state structure's ->missed field
ratelimit: Create functions to handle ratelimit_state internals
Add support to fetch compute partition related metrics in SMUv13.0.12 SOCs.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
xgmi_port_num interface reports external link number for port number. To
be consistent, use the external link number for reporting other XGMI
link data also.
v2: For invalid link number return -EINVAL (Kevin)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
"ENABLE" is currently misspelled in SYS_INFO_GPUCAPS__ENABEL_DFS_BYPASS
PS: checkpatch.pl is complaining about the presence of a space at the
start of drivers/gpu/drm/amd/include/atomfirmware.h line: 1716
This is propably because this file uses (two) spaces and not tabs.
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to fetch compute partition related metrics in SMUv13.0.6
SOCs.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Helps to keep a build time check about usage of right datatype and
avoids maintenance as new versions get added.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update pmfw headers for smu_v_13_0_6 to include pldm version
as part of statics metrics table
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move them to SMUv13.0.6 header file as they are used only in SMU
v13.0.6.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The previous patch removed smu_mode2_reset_is_support()
which was the only function to call through the mode2_reset_is_support()
method pointer.
Remove the remaining functions that were assigned to it
and the pointer itself.
See discussion at:
https://lore.kernel.org/all/DM4PR12MB5165D85BD85BC8FC8BF7A3B48E88A@DM4PR12MB5165.namprd12.prod.outlook.com/
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The amdgpu_set_thermal_throttling_logging() function directly accesses
the ratelimit_state structure's ->missed field, which works, but which
also makes it more difficult to change this field. Therefore, make use
of the ratelimit_state_reset_interval() function instead of directly
accessing the ->missed field.
Nevertheless, open-coded use of ->burst and ->interval is still permitted,
for example, for runtime sysfs adjustment of these fields.
Link: https://lore.kernel.org/all/fbe93a52-365e-47fe-93a4-44a44547d601@paulmck-laptop/
Link: https://lore.kernel.org/all/20250423115409.3425-1-spasswolf@web.de/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503180826.EiekA1MB-lkp@intel.com/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Kenneth Feng <kenneth.feng@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Xinhui Pan <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: <amd-gfx@lists.freedesktop.org>
Cc: <dri-devel@lists.freedesktop.org>
smu_v13_0_display_clock_voltage_request() and
smu_v13_0_set_min_deep_sleep_dcefclk() were added in 2020 by
commit c05d1c4015 ("drm/amd/swsmu: add aldebaran smu13 ip support (v3)")
but have remained unused.
Remove them.
smu_v13_0_display_clock_voltage_request() was the only user
of smu_v13_0_set_hard_freq_limited_range(). Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The last use of smu_v11_0_get_dpm_level_range() was removed in 2020 by
commit 46a301e14e ("drm/amd/powerplay: drop unnecessary Navi1x specific
APIs")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smu7_copy_bytes_from_smc() was added in 2016 by
commit 1ff55f4651 ("drm/amd/powerplay: implement smu7_smumgr for asics
with smu ip version 7.")
but never used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add and expose board voltage node as vddboard to hwmon for smu_v13_0_6
v2: Replace ip check with supported sensor attribute(Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add & enable board voltage caps for smu_v13_0_6
v3: Update version check for board voltage support
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fill static metrics data for smu_v13_0_6
v2: Proceed with driver load just with warning even if board
voltage reads invalid value
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use common function to fetch static metrics table for smu_v13_0_12
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fetch static metrics table for smu_v13_0_6
v2: Add static metrics caps check to fetch static metrics table
v3: Update version having all fixes for static metrics support
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add ip version check to use smu_v13_0_12 specific functions
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On SMU v13.0.2 and SMU v13.0.6 variants user may choose custom min/max
clocks in manual perf mode. Those custom min/max values need to be
reset once user switches to auto or restores default settings.
Otherwise, they may get used inadvertently during the next operation.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1e866f1fe5 ("drm/amd/pm: Prevent divide by zero")
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit da7dc714a8)
Cc: stable@vger.kernel.org
Add the callback for implementation for swsmu.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 92e511d1ce)
To be used for display idle optimizations when
we want to pause non-default profiles.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6dafb5d4c7)
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1e866f1fe5 ("drm/amd/pm: Prevent divide by zero")
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the callback for implementation for swsmu.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To be used for display idle optimizations when
we want to pause non-default profiles.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement VCN engine reset by sending MSG_ResetVCN
on smu 13.0.6.
v2: fix format for code and message
Reviewed-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace defines for the ones under smu_6_0_d.h and smu_6_0_sh_mask.h
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function atomctrl_initialize_mc_reg_table() and
atomctrl_initialize_mc_reg_table_v2_2() does not check the return
value of smu_atom_get_data_table(). If smu_atom_get_data_table()
fails to retrieve vram_info, it returns NULL which is later
dereferenced.
Fixes: b3892e2bb5 ("drm/amd/pp: Use atombios api directly in powerplay (v2)")
Fixes: 5f92b48cf6 ("drm/amd/pm: add mc register table initialization")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use gpu_metrics_v1_8 for smu_v13_0_12 to fill metrics data
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use gpu_metrics_v1_8 for smu_v13_0_6 to fill metrics data
v2: Move exposing caps to separate patch, move smu_v13.0.12 gpu metrics
1.8 usage to separate patch (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expose smu_v13_0_6 caps by moving it to common header
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To be able to remove as much duplicated defines, the different files
containing definitions, shifts and masks must be properly included.
Once done, the code will be migrated where needed to shifts and masks and
proper defines, before removing useless defines in the end.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add link reset implementation
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update smu metrics table to vesrion 0x10 for smu_v13_0_6
v2: Host metrics support removal moved to separate patch (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Firmware algorithm changed and the values in this version
are not accurate thereby remove host limit metric support
for smu_v13_0_6, smu_v13_0_12 & smu_v13_0_14
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hook up zero RPM enable for 9070 and 9070 XT based on RDNA3
(smu 13.0.0 and 13.0.7) code.
Tested on 9070 XT Hellhound
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.12.x
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: c52dcf4919 ("drm/amd/pp: Avoid divide-by-zero in fan_ctrl_set_fan_speed_rpm")
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: c52dcf4919 ("drm/amd/pp: Avoid divide-by-zero in fan_ctrl_set_fan_speed_rpm")
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 031db09017 ("drm/amd/powerplay/vega20: enable fan RPM and pwm settings V2")
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b64625a303 ("drm/amd/pm: correct the address of Arcturus fan related registers")
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: c05d1c4015 ("drm/amd/swsmu: add aldebaran smu13 ip support (v3)")
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Update feature list for smu_v13_0_6 to show vcn & smu deep
sleep feature enable status
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Few of the metrics data for smu_v13_0_12 has not been reported
in Q10 format, remove UQ10 to UINT conversion for those
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Few of the metrics data for smu_v13_0_6 has not been reported
in Q10 format, remove UQ10 to UINT conversion for those
v2: Move smu_v13_0_12 changes to separate patch(Kevin)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In certain cases, it's desirable to avoid PMFW log transactions to
system memory. Add a mask bit to decide whether to allocate smu pool in
device memory or system memory.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, it seems like the code was carried over from RDNA3 because
it assumes two possible values to set. RDNA4, instead of having:
0: min SCLK
1: max SCLK
only has
0: SCLK offset
This change makes it so it only reports current offset value instead of
showing possible min/max values and their indices. Moreover, it now only
accepts the offset as a value, without the indice index.
Additionally, the lower bound was printed as %u by mistake.
Old:
OD_SCLK_OFFSET:
0: -500Mhz
1: 1000Mhz
OD_MCLK:
0: 97Mhz
1: 1259MHz
OD_VDDGFX_OFFSET:
0mV
OD_RANGE:
SCLK_OFFSET: -500Mhz 1000Mhz
MCLK: 97Mhz 1500Mhz
VDDGFX_OFFSET: -200mv 0mv
New:
OD_SCLK_OFFSET:
0Mhz
OD_MCLK:
0: 97Mhz
1: 1259MHz
OD_VDDGFX_OFFSET:
0mV
OD_RANGE:
SCLK_OFFSET: -500Mhz 1000Mhz
MCLK: 97Mhz 1500Mhz
VDDGFX_OFFSET: -200mv 0mv
Setting this offset:
Old: "s 1 <offset>"
New: "s <offset>"
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4036
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use amdgpu_sriov_multi_vf_mode to replace amdgpu_sriov_vf(adev) && !amdgpu_sriov_is_pp_one_vf(adev).
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make it visible for the all GC 9.3.0 chips that support it.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make it visible for the all GC 12.x chips that support it.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make it visible for the all GC 11.x chips that support it.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update feature list for smu_v13_0_12 to show vcn & smu deep
sleep feature enable status.
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add error handling to propagate amdgpu_cgs_create_device() failures
to the caller. When amdgpu_cgs_create_device() fails, release hwmgr
and return -ENOMEM to prevent null pointer dereference.
[v1]->[v2]: Change error code from -EINVAL to -ENOMEM. Free hwmgr.
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
always allow ih interrupt from fw on smu v14 based on
the interface requirement
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With phm_powerdown_uvd() gone in the previous patch, there's
now no longer anything that reads the powerdown_uvd member of the
pp_hwmgr_func.
Remove it.
There are a few assignments to it; a boring NULL which can just go,
and two functions, but those functions are called explicitly anyway
so the assignments to the member go.
One of those (smu7_powerdown_uvd) wasn't static previously;
make it static.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
phm_powerdown_uvd() has been unused since 2017's
commit 47047263c5 ("drm/amd/powerplay: delete eventmgr related files.")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pp_atomfwctrl_get_pp_assign_pin() and pp_atomfwctrl_get_pp_assign_pin()
were added in 2017 by
commit 0d2c7569e1 ("drm/amdgpu: add new atomfirmware based helpers for
powerplay")
but have remained unused.
Remove them, and the helper functions they used.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add fan abnormal detection on smu v14.0.2&smu v14.0.3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
disable gfxoff on the specific sku based on the requirement
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Store it per instance so we can track it per instance.
v2: index instances directly on vcn1.0 and 2.0 to make
it clear that they only support a single instance (Lijo)
Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Get metrics table version for smu_v13_0_12 and populate pm_metrics
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the case of CPER disabled, generating CPER will cause kernel NULL
pointer dereference without checking.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use separate metrics table for smu_v13_0_12 and fetch metrics data using
that.
v2: Fix jpeg busy indexing (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fetch fru product info for smu_v13_0_12 from static metrics table
v2: Field by field copy for fru info(Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update pmfw headers for smu_v13_0_12 new messages & metrics table.
Static metrics table for frequency added, Separate metrics table
for smu_v13_0_12 added.
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch introduces a new function to check if the SMU supports resetting the SDMA engine.
This capability check ensures that the driver does not attempt to reset the SDMA engine
on hardware that does not support it.
The following changes are included:
- New function `amdgpu_dpm_reset_sdma_is_supported` to check SDMA reset
support at the AMDGPU driver level.
- New function `smu_reset_sdma_is_supported` to check SDMA reset support
at the SMU level.
- Implementation of `smu_v13_0_6_reset_sdma_is_supported` for the specific
SMU version v13.0.6.
- Updated `smu_v13_0_6_reset_sdma` to use the new capability check before
attempting to reset the SDMA engine.
v2: change smu_reset_sdma_is_supported type to bool (Tim)
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of is_idle.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On SMU v13.0.12, always query the firmware to get the current power
limit as it could be updated through other means also.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Generate CPER record when bad page threshold exceed and
commit to CPER ring.
v2: return -ENOMEM instead of false
v2: check return value of fill section function
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since pmfw supports for smuv13_0_6 is limited to 8 jpeg rings per instance,
which is the max for jpeg_v_4_0_3. Limit it to same to avoid out
of bound access.
Fixes: 568199a5c7 ("drm/amd/pm: Limit to 8 jpeg rings per instance")
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename pmfw message SelectPstatePolicy to SetThrottlingPolicy as per
pmfw interface header for smu_v_13_0_6
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This initializes drm/amd/pm version 11.5.2
Signed-off-by: YING LI <yingli12@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For amdgpu_get_pp_force_state, amdgpu_get_pp_cur_state already takes
care of device state check. In other cases, values are returned from
driver cached variables and are not dependent on device state.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <feifei.xu@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If a device supports runtime pm, then pm_runtime_get_if_active returns 0
if a device is not active and 1 if already active. However, if a device
doesn't support runtime pm, the API returns -EINVAL. A device not
supporting runtime pm implies it's not affected by runtime pm and it's
active. Hence no need to get() to increment usage count. Remove < 0
return value check. Also, ignore runpm state to determine active status.
If the device is already in suspend state, disallow access.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <feifei.xu@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wrap the checks before device access in helper functions and use them
for device access. The generic order of APIs now is to do input argument
validation first and check if device access is allowed.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <feifei.xu@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
JPEG 5.0.1 supports upto 10 rings, however PMFW support for SMU v13.0.6
variants is now limited to 8 per instance. Limit to 8 temporarily to
avoid out of bounds access.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update power management & clk attributes for gc_v_9_5_0
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Skip showing MCLK_OD level if setting UCLK MAX is not supported
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add metrics table support for smuv13.0.12 to
fetch data from metrics version v2
v2: Update get metric field and get metric size macro (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add SMUv13.0.12 PPT interface to fetch dpm features
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add metrics table header for smu_v13_0_12 as metrics version V2
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update metrics table struct name for smu_v_13.0.6 and keep
it as version
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fill ip version in pm_metrics for SMU v13.0.12
v2: Remove ip version check(Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Populate pmfw version for SMU v13.0.12 to device struct
v2: Remove ip version check to get smu version
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now that we can select a workload profile dynamically when
we submit work, it's best to default to the bootup
default workload profile. Defaulting to other profiles
prevents some power management features from kicking in
during idle periods. Once all jobs have finished, the
workload profile will automatically move back to default
bootup for max power savings.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This initializes SMU IP version 14.0.5.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It malicious user provides a small pptable through sysfs and then
a bigger pptable, it may cause buffer overflow attack in function
smu_sys_set_pp_table().
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
UVD and VCN were split into separate dpm helpers in commit
ff69bba05f ("drm/amd/pm: add inst to dpm_set_powergating_by_smu")
as such, there is no need to include UVD in the is_vcn variable since
UVD and VCN are handled by separate dpm helpers now. Fix the check.
Fixes: ff69bba05f ("drm/amd/pm: add inst to dpm_set_powergating_by_smu")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3959
Link: https://lists.freedesktop.org/archives/amd-gfx/2025-February/119827.html
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Boyuan Zhang <boyuan.zhang@amd.com>
Aldebaran doesn't support querying MM activity percentage. Keep the
field as 0xFFs to mark it as unsupported.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Fix the initialization and usage of SMU v13.0.6 capability values. Use
caps_set/clear functions to set/clear capability.
Also, fix SET_UCLK_MAX capability on APUs, it is supported on APUs.
Fixes: e9b86b841b ("drm/amd/pm: Add capability flags for SMU v13.0.6")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch refactors the firmware version checks in `smu_v13_0_6_reset_sdma`
to support multiple SMU programs with different firmware version thresholds.
V2: return -EOPNOTSUPP for unspported pmfw
Suggested-by: Lazar Lijo <Lijo.Lazar@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pmfw now unifies PPSMC_MSG_ResetSDMA definitions for different devices.
PPSMC_MSG_ResetSDMA2 is not needed.
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pmfw unified PPSMC_MSG_ResetSDMA definitions for different devices.
PPSMC_MSG_ResetSDMA2 is not needed.
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add capability flags for SMU v13.0.6 variants. Initialize the flags
based on firmware support. As there are multiple IP versions maintained,
it is more manageable with one time initialization of caps flags based
on IP version and firmware feature support.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only apply when compute profile is selected. This is
the only supported configuration. Selecting other
profiles can lead to performane degradations.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add the PPSMC_MSG_ResetSDMA2 definition for smu 13.0.6
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fill max memory bandwidth and total app clock counter to metrics v1_7
v2: Remove unnecessary check
v3: Add app clock counter support for apu
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update pmfw headers for smuv13.0.6 to pmfw version 85.121
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the helper function rather than reading it directly.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Before forcing level, CG/PG is disabled or enabled depending on the new
level. However if the force level operation fails, CG/PG state remains
modified. Revert the state change on failure. Also, move invalid
operation checks to the beginning before any logic that could change SOC
state.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for new smu 13_0_12 version
v2: Updated subject & moved skipping p2s init to a separate patch
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some of the firmware that is loaded by amdgpu is not actually required.
For example the ISP firmware on some SoCs is optional, and if it's not
present the ISP IP block just won't be initialized.
The firmware loader core however will show a warning when this happens
like this:
```
Direct firmware load for amdgpu/isp_4_1_0.bin failed with error -2
```
To avoid confusion for non-required firmware, adjust the amd-ucode helper
to take an extra argument indicating if the firmware is required or
optional.
On optional firmware use firmware_request_nowarn() instead of
request_firmware() to avoid the warnings.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/amd-gfx/df71d375-7abd-4b32-97ce-15e57846eed8@amd.com/T/#t
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function atomctrl_get_smc_sclk_range_table() does not check the return
value of smu_atom_get_data_table(). If smu_atom_get_data_table() fails to
retrieve SMU_Info table, it returns NULL which is later dereferenced.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
In practice this should never happen as this code only gets called
on polaris chips and the vbios data table will always be present on
those chips.
Fixes: a23eefa2f4 ("drm/amd/powerplay: enable dpm for baffin.")
Signed-off-by: Ivan Stepchenko <sid@itb.spb.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds the missing kdoc parameter descriptor for 'inst' in the
smu_dpm_set_power_gate function.
The 'inst' parameter, which specifies the instance of the IP block to
power gate/ungate.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/amdgpu_smu.c:359: warning: Function parameter or struct member 'inst' not described in 'smu_dpm_set_power_gate'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pass ip_block instead of adev in set_clockgating_state() callback
functions. Modify set_clockgating_state()for all correspoding ip blocks.
v2: remove all changes for is_idle(), remove type casting
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pass ip_block instead of adev in set_powergating_state callback function.
Modify set_powergating_state ip functions for all correspoding ip blocks.
v2: fix a ip block index error.
v3: remove type casting
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add an instance parameter to amdgpu_dpm_enable_vcn() function, and change
all calls from vcn ip functions to add instance argument. vcn generations
with only one instance (v1.0, v2.0) always use 0 as instance number. vcn
generations with multiple instances (v2.5, v3.0, v4.0, v4.0.3, v4.0.5,
v5.0.0) use the actual instance number.
v2: remove for-loop in amdgpu_dpm_enable_vcn(), and temporarily move it
to vcn ip with multiple instances, in order to keep the exact same logic
as before, until further separation in next patch.
v3: fix missing prefix
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add an instance parameter to amdgpu_dpm_set_powergating_by_smu() function,
and use the instance to call set_powergating_by_smu().
v2: remove duplicated functions.
remove for-loop in amdgpu_dpm_set_powergating_by_smu(), and temporarily
move it to amdgpu_dpm_enable_vcn(), in order to keep the exact same logic
as before, until further separation in next patch.
v3: drop SI logic in amdgpu_dpm_enable_vcn().
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add an instance parameter to set_powergating_by_smu() function, and
re-write all amd_pm functions accordingly. Then use the instance to
call smu_dpm_set_vcn_enable().
v2: remove duplicated functions.
remove for-loop in smu_dpm_set_power_gate(), and temporarily move it to
to amdgpu_dpm_set_powergating_by_smu(), in order to keep the exact same
logic as before, until further separation in next patch.
v3: add instance number in error message.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
First, add an instance parameter to smu_dpm_set_vcn_enable() function,
and calling dpm_set_vcn_enable() with this given instance.
Second, modify vcn_gated to be an array, to track the gating status
for each vcn instance separately.
With these 2 changes, smu_dpm_set_vcn_enable() will check and set the
gating status for the given vcn instance ONLY.
v2: remove duplicated functions.
remove for-loop in dpm_set_vcn_enable(), and temporarily move it to
to smu_dpm_set_power_gate(), in order to keep the exact same logic as
before, until further separation in next patch.
v3: add instance number in error message.
v4: declaring i at the top of the function.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For smu ip with multiple vcn instances (smu 11/13/14), remove all the
for loop in dpm_set_vcn_enable() functions. And use the instance
argument to power up/down vcn for the given instance only, instead
of powering up/down for all vcn instances.
v2: remove all duplicated functions in v1.
remove for-loop from each ip, and temporarily move to dpm_set_vcn_enable,
in order to keep the exact same logic as before, until further separation
in the next patch.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In case of error after a amdgpu_gfx_rlc_enter_safe_mode() call, it is not
balanced by a corresponding amdgpu_gfx_rlc_exit_safe_mode() call.
Add the missing call.
Fixes: 9b7b8154cd ("drm/amd/powerplay: added didt support for vega10")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement sdma soft reset by sending MSG_ResetSDMA on smu 13.0.6.
v2: Add firmware version for the reset message.
v3: Add ip version check. Print inst_mask on failure.
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the default workload type to bootup type on smu v13.0.7.
This is because of the constraint on smu v13.0.7.
Gfx activity has an even higher set point on 3D fullscreen
mode than the one on bootup mode. This causes the 3D fullscreen
mode's performance is worse than the bootup mode's performance
for the lightweighted/medium workload. For the high workload,
the performance is the same between 3D fullscreen mode and bootup
mode.
v2: set the default workload in ASIC specific file
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
Refactor such that individual SMU IP versions can choose the startup
power profile mode. If no preference, then use the generic default power
profile selection logic.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
smu->workload_mask is IP specific and should not be messed with in
the common code. The mask bits vary across SMU versions.
Move all handling of smu->workload_mask in to the backends and
simplify the code. Store the user's preference in smu->power_profile_mode
which will be reflected in sysfs. For internal driver profile
switches for KFD or VCN, just update the workload mask so that the
user's preference is retained. Remove all of the extra now unused
workload related elements in the smu structure.
v2: use refcounts for workload profiles
v3: rework based on feedback from Lijo
v4: fix the refcount on failure, drop backend mask
v5: rework custom handling
v6: handle failure cleanup with custom profile
v7: Update documentation
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Kenneth Feng <kenneth.feng@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
This reverts commit 74e1006430.
This causes a regression in the workload selection.
A more extensive fix is being worked on.
For now, revert.
This came back after a merge in 6.13-rc1, so revert again.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3618
Fixes: 74e1006430 ("drm/amd/pm: correct the workload setting")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 44f392fbf6)
As per power team, there is no need to impose a lower bound on arcturus
power limit. Any unreasonable limit set will result in frequent
throttling.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
add gen5 display to the user on smu v14.0.2/3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
The check for tools_size being non-zero is redundant as tools_size is
explicitly set to a non-zero value (0x19000). Removing the if condition
simplifies the code without altering functionality.
Signed-off-by: Bhavin Sharma <bhavin.sharma@siliconsignals.io>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Get XGMI_v_6_4_0 link status and populate it to metrics v1_7 for
SMU_v_13_0_6
v2: Get link status register value for each soc from separate
function (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new gpu_metrics_v1_7 to acquire xgmi link status,
application counter and max vram bandwidth
v2: Use gpu_metrics_v1_7 for SMU_v_13_0_6 (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add vcn and jpeg error count parsing.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, the pp_dpm_mclk values are reported in descending order
on SMU IP v14.0.0/1/4. Adjust to ascending order for consistency
with other clock interfaces.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Together with the feature to enable or disable zero RPM in the last
commit, it also makes sense to expose the OD setting determining under
which temperature the fan should stop if zero RPM is enabled.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Wolfgang Müller <wolf@oriole.systems>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Whilst we have support for setting fan curves there is no support for
disabling the zero RPM feature. Since the relevant bits are already
present in the OverDriveTable, hook them up to a sysctl setting so users
can influence this behaviour.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3489
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Wolfgang Müller <wolf@oriole.systems>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct the workload setting in order not to mix the setting
with the end user. Update the workload mask accordingly.
v2: changes as below:
1. the end user can not erase the workload from driver except default workload.
2. always shows the real highest priority workoad to the end user.
3. the real workload mask is combined with driver workload mask and end user workload mask.
v3: apply this to the other ASICs as well.
v4: simplify the code
v5: refine the code based on the review comments.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
always pick the pptable from IFWI on smu v14.0.2/3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add an instance parameter to the existing function dpm_set_vcn_enable()
for future implementation. Re-write all pptable functions accordingly.
v2: Remove duplicated dpm_set_vcn_enable() functions in v1. Instead,
adding instance parameter to existing functions.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The following 3 commits landed in parallel:
commit d7d2688bf4 ("drm/amd/pm: update workload mask after the setting")
commit 7a1613e47e ("drm/amdgpu/smu13: always apply the powersave optimization")
commit 7c210ca5a2 ("drm/amdgpu: handle default profile on on devices without fullscreen 3D")
While everything is set correctly, this caused the profile to be
reported incorrectly because both the powersave and fullscreen3d bits
were set in the mask and when the driver prints the profile, it looks
for the first bit set.
Fixes: d7d2688bf4 ("drm/amd/pm: update workload mask after the setting")
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
KASAN reports that the GPU metrics table allocated in
vangogh_tables_init() is not large enough for the memset done in
smu_cmn_init_soft_gpu_metrics(). Condensed report follows:
[ 33.861314] BUG: KASAN: slab-out-of-bounds in smu_cmn_init_soft_gpu_metrics+0x73/0x200 [amdgpu]
[ 33.861799] Write of size 168 at addr ffff888129f59500 by task mangoapp/1067
...
[ 33.861808] CPU: 6 UID: 1000 PID: 1067 Comm: mangoapp Tainted: G W 6.12.0-rc4 #356 1a56f59a8b5182eeaf67eb7cb8b13594dd23b544
[ 33.861816] Tainted: [W]=WARN
[ 33.861818] Hardware name: Valve Galileo/Galileo, BIOS F7G0107 12/01/2023
[ 33.861822] Call Trace:
[ 33.861826] <TASK>
[ 33.861829] dump_stack_lvl+0x66/0x90
[ 33.861838] print_report+0xce/0x620
[ 33.861853] kasan_report+0xda/0x110
[ 33.862794] kasan_check_range+0xfd/0x1a0
[ 33.862799] __asan_memset+0x23/0x40
[ 33.862803] smu_cmn_init_soft_gpu_metrics+0x73/0x200 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779]
[ 33.863306] vangogh_get_gpu_metrics_v2_4+0x123/0xad0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779]
[ 33.864257] vangogh_common_get_gpu_metrics+0xb0c/0xbc0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779]
[ 33.865682] amdgpu_dpm_get_gpu_metrics+0xcc/0x110 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779]
[ 33.866160] amdgpu_get_gpu_metrics+0x154/0x2d0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779]
[ 33.867135] dev_attr_show+0x43/0xc0
[ 33.867147] sysfs_kf_seq_show+0x1f1/0x3b0
[ 33.867155] seq_read_iter+0x3f8/0x1140
[ 33.867173] vfs_read+0x76c/0xc50
[ 33.867198] ksys_read+0xfb/0x1d0
[ 33.867214] do_syscall_64+0x90/0x160
...
[ 33.867353] Allocated by task 378 on cpu 7 at 22.794876s:
[ 33.867358] kasan_save_stack+0x33/0x50
[ 33.867364] kasan_save_track+0x17/0x60
[ 33.867367] __kasan_kmalloc+0x87/0x90
[ 33.867371] vangogh_init_smc_tables+0x3f9/0x840 [amdgpu]
[ 33.867835] smu_sw_init+0xa32/0x1850 [amdgpu]
[ 33.868299] amdgpu_device_init+0x467b/0x8d90 [amdgpu]
[ 33.868733] amdgpu_driver_load_kms+0x19/0xf0 [amdgpu]
[ 33.869167] amdgpu_pci_probe+0x2d6/0xcd0 [amdgpu]
[ 33.869608] local_pci_probe+0xda/0x180
[ 33.869614] pci_device_probe+0x43f/0x6b0
Empirically we can confirm that the former allocates 152 bytes for the
table, while the latter memsets the 168 large block.
Root cause appears that when GPU metrics tables for v2_4 parts were added
it was not considered to enlarge the table to fit.
The fix in this patch is rather "brute force" and perhaps later should be
done in a smarter way, by extracting and consolidating the part version to
size logic to a common helper, instead of brute forcing the largest
possible allocation. Nevertheless, for now this works and fixes the out of
bounds write.
v2:
* Drop impossible v3_0 case. (Mario)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: 41cec40bc9 ("drm/amd/pm: Vangogh: Add new gpu_metrics_v2_4 to acquire gpu_metrics")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Evan Quan <evan.quan@amd.com>
Cc: Wenyou Yang <WenYou.Yang@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241025145639.19124-1-tursulin@igalia.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some devices do not support fullscreen 3D.
v2: Make the check generic.
Fixes: 336568de91 ("drm/amdgpu/swsmu: default to fullscreen 3D profile for dGPUs")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Kenneth Feng <kenneth.feng@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
We dont need to set the functions to NULL which arent
needed as global structure members are by default
set to zero or NULL for pointers.
Cc: Leo Liu <leo.liu@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the dummy soft_reset functions for all
ip blocks.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the dummy wait_for_idle functions for all
ip blocks.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
disable deep sleep during the compute workload for the
potential performance loss on smu v14.0.2/3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update overdrive function on smu v14.0.2/3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update the driver-fw interface file for smu v14.0.2/3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On chips that support it, you can specificy 0 and 0xffff for
min and max and the PMFW will use that to determine the optimal
min and max. This enables optimal performance when the
user manually switches between performance levels using sysfs.
Previously we'd set soft min/max which could limit performance.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fill pcie other end recovery counter to metrics 1.6
v2: Add separate function to check recovery counter support
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update pmfw headers for smuv13.0.6 to version 0xE
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Partially revert
commit 0ca9f757a0 ("drm/amd/pm: powerplay: Add `__counted_by` attribute for flexible arrays")
The count attribute for these arrays does not get set until
after the arrays are allocated and populated leading to false
UBSAN warnings.
Fixes: 0ca9f757a0 ("drm/amd/pm: powerplay: Add `__counted_by` attribute for flexible arrays")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3662
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't wake up the GPU for reading pm values. Instead, take a runtime
powermanagement ref when trying to read it if and only if the GPU is
already awake.
This avoids spurious wake ups (eg: from applets).
We use pm_runtime_get_if_in_active because we care about "is the GPU awake?"
not about "is the GPU awake and something else prevents suspend?".
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reading pm values from the GPU shouldn't prevent it to be suspended
by resetting the last active timestamp (eg: if an background app
monitors GPU sensors every second, it would prevent the autosuspend
sequence to trigger).
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of hw_fini.
Also update the ip_block ptr where ever needed as
there were cyclic dependency of hw_fini on suspend
and some followed clean up.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of hw_init.
Also update the ip_block ptr where ever needed as
there were cyclic dependency of hw_init on resume.
v2: squash in isp fix
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of resume.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of suspend.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of wait_for_idle.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Using pm_runtime_resume_and_get over pm_runtime_get_sync is recommended.
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pm_runtime_put_autosuspend must be called from all exit paths.
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of soft_reset.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of late_fini.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We start with the function 'atomctrl_calculate_voltage_evv_on_sclk'
which has been unused since 2016's commit
e805ed83ba ("drm/amd/powerplay: delete useless files.")
Remove it.
It was also the last user of the entire fixed point maths library in
ppevvmath.h.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update the *handle to amdgpu_ip_block ptr for all
functions pointers of sw_fini.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update the *handle to amdgpu_ip_block ptr for all
functions pointers of sw_init.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the ptr handle to amdgpu_ip_block ptr in all
the functions of late_init function ptr.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update the handle ptr to amdgpu_ip_block ptr
for all functions pointers on early_init.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This resolves the unchecded return value warning reported by Coverity.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop pending_reset flag in gmc block. Instead use init level to
determine which type of init is preferred - in this case MINIMAL.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When SMU IP is disabled by ip_block_mask, driver
should not refer to any dpm/swSMU callback. Instead,
any driver call into swSMU/dpm callback needs to
return error code EOPNOTSUPP.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use metrics 1_6 to report activities per partition
v2: Use separate per instance for different platforms, shared
vcn handled by other fix
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new gpu_metrics_v1_6 with activities per partition
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
