v1:
Separate DPM clock attribute constraints for Arcturus (9.4.1) and
Aldebaran (9.4.2) ASICs.
- For Aldebaran:
* mclk/socclk: Disable write, only voltage control supported
* fclk/pcie: Mark as unsupported
- Remove 9.4.2 from global pcie check and handle it in ASIC specific case
- Update comments to reflect correct hardware names
v2:
fix some coding logic issue (by asad)
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gfx_v12_0_init_microcode() always loads RS64 CP ucode but never set
adev->gfx.rs64_enable, so it stayed false and code that branches on it
(e.g. MEC pipe reset) used the legacy CP_MEC_CNTL path incorrectly.
Match GFX11: derive RS64 mode from the PFP firmware header (v2.0) via
amdgpu_ucode_hdr_version(). Log at debug when RS64 is enabled.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds support for vpe v2.0.0 with new structs and ip functions
Acked-by: Roy Chan <Roy.Chan@amd.com>
Signed-off-by: Caden Chien <chih-wei.chien@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New offset and sh/mask are added for vpe v2.0.0
Acked-by: Roy Chan <Roy.Chan@amd.com>
Signed-off-by: Caden Chien <chih-wei.chien@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A callback function is added to setup doorbell range during vpe hw
queue initialization on nbio 7.11.4.
Signed-off-by: Caden Chien <chih-wei.chien@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
S2A doorbell entry 5 on nbio 7.11.4 is used by vpe 2.0
Signed-off-by: Caden Chien <chih-wei.chien@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When we do a full adapter reset, if we know the timedout fence
mark the fence with -ETIME rather than -ECANCELED so it
gets properly handled by userspace.
v2: rebase
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the required FRL registers for DCN316.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the required FRL registers for DCN315.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add all the required registers to support FRL on DCN303.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the required FRL registers for DCN302.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add all the required registers to support FRL on DCN314.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit add the basic set of FRL registers associated with DCN32.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the required DCN3.2.1 registers to enable FRL in this ASIC.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit introduces multiple hardware registers necessary to enable
FRL on AMD devices.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce the stream creation function, which requires the FRL
registers for DCN30.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The legacy CPER debugfs reader can reach the payload path without a
valid pointer snapshot. The remaining user byte count is also treated as
the ring occupancy in dwords, so reads past the header can copy more than
requested.
Take the CPER lock before sampling pointers. Resample rptr/wptr for
payload reads, bound the payload copy by available dwords and the
remaining user size, and advance the file position for each dword copied.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are gaps in the pf2vf message structure
between the guest driver and the host driver.
The pf2vf message info structure must be kept in sync
between both sides to ensure correct interpretation of fields.
Signed-off-by: chong li <chongli2@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following update:
-Revert "Enable HUBP/OPTC/DPP power gating"
-Revert "Unify fast update classification paths"
-enable ODM 2:1 on single eDP based on pixel clock
-Enable IPS on DCN42
-Add additional IPS entry/exit for PSR/Replay
-Separate ABM functions into dedicated power_abm.c file
-Fix always-true lower-bound assert
-Refactor dc_link_aux_transfer_raw
-only call pmfw if smu present flags true
-Fix multiple compiler warnings
-Fix CRC open failure during active rendering
-Fix white screen on boot with OLED panel
-Fix refresh rate round up case
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Update DMUB related command structure.
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dcn32_validate_bandwidth() wraps dcn32_internal_validate_bw() with
DC_FP_START()/DC_FP_END(). In x86 non-RT, DC_FP_START takes fpregs_lock(),
which disables local softirqs.
The DML1 path through dcn32_enable_phantom_plane() calls kvzalloc() to
allocate ~335 KiB for dc_plane_state. This triggers the vmalloc path,
which calls BUG_ON(in_interrupt()) because it's invoked within the
FPU-enabled (softirq disabled) region, leading to a kernel crash.
[How]
Wrap the dc_state_create_phantom_plane() call with the
DC_RUN_WITH_PREEMPTION_ENABLED() macro to allow preemption during
this memory allocation.
Fixes: 235c676342 ("drm/amd/display: add DCN32/321 specific files for Display Core")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/4470
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Pipe power gating is causing regressions.
Revert to unblock testing and promotion
This reverts commit 2eb0681ea7.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
This change causes regressions in ACPI and display off/on testing.
Revert the change to unblock testing.
This reverts commit 5f6937c1af.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
this is to force ODM 2:1 on single eDP to lower dispclk/dppclk.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
warnings were triggered by enum forward declarations that are not
valid in C++ without an explicit underlying type.
[How]
- Replace problematic enum forward declarations with C++-safe forms where
applicable.
- Use plain integer types for interface-only declarations that do not
require strong enum typing.
- Update dependent winterface signatures and related type usage
consistently.
- Add required include and type-visibility fixes to avoid follow-on parse
and type-resolution issues.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Fully enable IPS to achieve higher power savings.
Reviewed-by: Sunpeng Li <sunpeng.li@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Multiple paths issue DMUB commands without managing IPS state, causing
dc_wake_and_execute_gpint/dmub_cmd to internally wake from IPS and
reallow idle. This flips idle_allowed back to true while
idle_optimizations_allowed remains false during in-flight commits,
desynchronizing the two flags.
Affected paths:
- amdgpu_dm_psr_set_event() and amdgpu_dm_replay_set_event() calls from
amdgpu_dm_handle_vrr_transition(), amdgpu_dm_commit_planes() and
amdgpu_dm_mod_power_update_streams(), that are invoked on atomic commits.
- debugfs psr_get(), psr_read_residency(), replay_get_state(),
replay_set_residency() access hardware without holding dc_lock or
disabling IPS.
[How]
- Explicitly exit IPS before PSR/Replay set_event w/ hw_programming,
called within atomic commit.
- Wrap debugfs PSR/Replay state getters and setters with IPS exit/entry +
dc_lock.
Reviewed-by: Sunpeng Li <sunpeng.li@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Improves code organization by separating Adaptive Backlight
Modulation functionality from general power management.
This modular approach enhances maintainability and makes the
codebase easier to navigate.
[How]
Create new power_abm.c file containing all ABM-related functions moved from power.c.
Remove static qualifier from shared functions to enable cross-file access:
- initialize_backlight_caps: Initialize backlight capabilities
- validate_ext_backlight_caps: Validate external backlight capabilities
- backlight_millipercent_to_pwm: Convert brightness percent to PWM
- backlight_millipercent_to_millinit: Convert brightness percent to nits
- fill_backlight_level_params: Populate backlight level parametersAdd function
declarations to mod_power.h header. Update CMakeLists.txt to include power_abm.c in build.
Maintain forward declaration of struct core_power for type compatibility.
Rename struct core_power field from 'public' to 'mod_public'.
Move internal structures (backlight_state, backlight_properties,
dmcu_varibright_cached_properties, core_power) to power_helpers.h to
ensure consistent memory layouts across compilation units.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Lohita Mudimela <lohita.mudimela@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
A recent type change made the lower-bound part of the OTG instance
assert redundant, which can trigger static-analysis noise and distract
from actionable diagnostics.
[How]
Kept the meaningful upper-bound range validation required for safe
narrowing to uint8_t. Removed the redundant non-negative portion of the
assert so the check matches current type semantics. Revalidated with the
latest debug build log: no warnings and no build-failure markers.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Introduce dc_plane_cm struct.
TRIM_CM2 flag is used to synchronize between old and new implementation.
[How]
Introduce dc_plane_cm struct.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rafal Ostrowski <rafal.ostrowski@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
The logic for choosing between the dce_aux_transfer function variants is
moved into dce_aux.c rather than link_ddc.c.
The "dce_aux_transfer_with_retries" function now uses
dce_aux_transfer_raw in its implementation as the logic is equivalent.
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Reviewed-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
for fault safe case: only call pmfw if smu present flags true
and default to 2 channle for bios intergration info table error.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Fix various warnings related to unsigned/signed mismatches
- Consistently use the same signedness for a given value
- Explcitly cast between types when needed
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Clay King <clayking@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Unreachable Code;
Copy Constructor Deleted;
Local Declaration Hides Parameter;
Local Declaration Hides Outer Scope;
Uninitialized or Suspicious Memory Use.
[How]
- Removed or refactored unreachable code paths
- Ensured proper copy constructors in C++ classes
- Renamed local variables that shadowed function parameters
- Renamed inner loop/block variables to avoid shadowing outer scope
Fixed in 8 files across several FPU layers
Also fixed in color_gamma and cs_funcs modules
- Reordered guard conditions to validate pipe type before accessing stream
- Ensures safe memory access patterns in DC DMUB service layer
All changes maintain backward compatibility and preserve functional behavior.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
In dml2_translation_helper.c, rename the inner loop index inside
dml2_init_soc_states() for several project cases
to avoid shadowing the outer function-scope index variable.
In display_mode_core.c, replace shift-based power-of-two expressions
used to compute dpte_row_height and dpte_row_height_linear with an
equivalent floating-point power function, consistent with existing
usage elsewhere in the file.
Behavior for valid inputs is preserved in both cases.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Address signed/unsigned comparison warnings in DC paths
to keep builds warning-clean and improve type safety at comparison boundaries.
Most warnings came from signed loop/index temporaries compared against unsigned
counters (for example pipe_count, num_states, and resource-cap counters), plus a
small number of mixed signed/unsigned checks in writeback and clock-related assertions.
[How]
Aligned iterator and temporary variable types with the semantic type of the compared
bounds. Used unsigned indices for loops bounded by unsigned counters, and retained signed
types where values are semantically signed (for example arithmetic with sentinel or signed
intermediate values). Where mixed signed/unsigned comparisons are intentional, applied
explicit boundary casts or split assertions (for example non-negative signed-cap
checks before unsigned comparisons) instead of broad type changes.
No functional behavior changes are intended; this is a warning-resolution and
type-alignment cleanup.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Opening the CRC data file during active rendering can fail with -EINVAL.
The wait for commit->hw_done returns remaining jiffies on success, but
the CRC path was treating that as an error.
[How]
Handle wait_for_completion_interruptible_timeout() correctly:
positive return as success, 0 as timeout, and negative as error.
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During mode change, replay_event_general_ui may remain set on the old
stream while replay_event_hw_programming is set. This can re-enable
Replay too early before hardware programming is complete.
[How]
Clear replay_event_general_ui in the mode-change path when setting
replay_event_hw_programming to keep Replay blocked until programming
finishes, avoiding white screen on OLED panels after boot.
Reviewed-by: Sunpeng Li <sunpeng.li@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
fix refresh rate round up case
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: ChunTao Tso <ChunTao.Tso@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function mes_v12_1_map_test_bo incorrectly returned 0 unconditionallyon error path,
which would hide the real error code and mislead upperlayers about the failure status.
Fix it by returning the correct error code 'r' instead of 0.
Fixes: 44e5195fa3 ("drm/amdgpu/mes_v12_1: add mes self test");
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Convert the SMU15.0.8 enabled-feature query to
smu_cmn_send_smc_msg_with_params() so it uses the common SMU
multi-msgs helper.
No functional change intended.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Convert the SMU15.0.0 table transfer path and enabled-feature query to
smu_cmn_send_smc_msg_with_params() so both paths use the common SMU
multi-msgs helper.
No functional change intended.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix lock inversions pointed out by Prike and Sunil. The hang detection
timeout *CAN'T* grab locks under which we wait for fences, especially
not the userq_mutex lock.
Then instead of this completely broken handling with the
hang_detect_fence just cancel the work when fences are processed and
re-start if necessary.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Well the reset handling seems broken on multiple levels.
As first step of fixing this remove most calls to the hang detection.
That function should only be called after we run into a timeout! And *NOT*
as random check spread over the code in multiple places.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This one was fortunately not looking so bad as the wait ioctl path, but
there were still a few things which could be fixed/improved:
1. Allocating with GFP_ATOMIC was quite unnecessary, we can do that
before taking the userq_lock.
2. Use a new mutex as protection for the fence_drv_xa so that we can do
memory allocations while holding it.
3. Starting the reset timer is unnecessary when the fence is already
signaled when we create it.
4. Cleanup error handling, avoid trying to free the queue when we don't
even got one.
v2: fix incorrect usage of xa_find, destroy the new mutex on error
v3: cleanup ref ordering
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Convert the SMU15 table address messages to
smu_cmn_send_smc_msg_with_params() so they use the common SMU
multi-msgs helper instead of open-coding struct smu_msg_args.
No functional change intended.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU15 driver messages can carry multiple input parameters and return
values, but callers still have to build struct smu_msg_args directly.
Add common SMU multi-msgs helpers in smu_cmn and reuse them in the
single-parameter wrapper and the shared table transfer path.
Keep smu_cmn_send_smc_msg() semantics unchanged for older callers.
No functional change intended.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The purpose of a GPU reset is to make sure that fence can be signaled
again and the signal and resume workers can make progress again.
So waiting for the resume worker or any fence in the GPU reset path is
just utterly nonsense.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
