Readout lane count back from HW. Reuse existing function
for Cx0 for LT PHY case with minor modification to add
lanes as function parameters.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-20-mika.kahola@intel.com
Add new pll_disable_clock functions so that they can be
hooked up to dpll->disable. This is just a wrapper over
the exitisting intel_xe3plpd_pll_disable to make it
compatible With dpll->disable function
v2: Revise commit message (Suraj)
Drop wrapper for TBT clock disabling and reuse
intel_mtl_pll_disable_clock() for DDI clock
disabling hook (Suraj)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-18-mika.kahola@intel.com
Enable PLL clock on DDI by moving part of the PLL enabling
sequence into a DDI clock enabling function.
v2: Reuse intel_mtl_pll_enable_clock for DDI clock enabling
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-17-mika.kahola@intel.com
Add .get_freq function hook to support dpll framework for xe3plpd platform.
v2: Restore port clock calculation (Suraj)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-15-mika.kahola@intel.com
Add .get_hw_state hook to xe3plpd platform for dpll framework
and update intel_lt_phy_pll_readout_hw_state() function
accordingly to support dpll framework.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-14-mika.kahola@intel.com
Add .dump_hw_state function pointer for xe3plpd platform
to support dpll framework. While at it, switch to use
drm_printer structure to print hw state information.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-12-mika.kahola@intel.com
Add .update_dpll_ref_clks function pointer to xe3plpd
platform to support dpll framework. Reuse ICL
function pointer.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-11-mika.kahola@intel.com
Add .update_active_dpll function pointer to support
dpll framework for xe3plpd platform. Reuse ICL function
pointer.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-10-mika.kahola@intel.com
Add .put_dplls function pointer to support xe3plpd platform
on dpll framework. Reuse ICL function pointer.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-9-mika.kahola@intel.com
Add .get_dplls function pointer for xe3plpd platforms
to support dpll framework. Reuse the ICL function
pointer.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-8-mika.kahola@intel.com
The LT PHY implementation currently pulls PLL and port_clock
information directly from the CRTC state. This ties the PHY
programming logic too tightly to the CRTC state and makes it
harder to clearly express the PHY’s own PLL configuration.
Introduce an explicit "struct intel_lt_phy_pll_state" argument
for the PHY functions and update callers accordingly.
No functional change is intended — this is a preparatory cleanup for
to bring LT PHY PLL handling as part of PLL framework.
v2: DP, HDMI 2.0, and HDMI FRL modes are port of the VDR configuration 0
register. These modes are defined by bits 2:0. Decode these to
differentiate DP and HDMI modes when programming PLL's. (Imre, Suraj)
v3: Pass port_clock as argument instead of recalculating it (Suraj)
v4: Fix checkpatch warning of line length exceeding 100 columns
BSpec: 744921
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-5-mika.kahola@intel.com
Start bringing in xe3plpd as part of dpll framework. The work is
started by adding PLL information and related function hooks.
v2: Fix xe3plpd type (Suraj)
Remove empty line between BSpec link and Signed-off-by (Suraj)
BSpec: 74304
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-4-mika.kahola@intel.com
Add check for PLL enabling and return early if
PLL is not enabled.
v2: Use PCLK PLL ACK bit to check if PLL is enabled (Suraj)
v3: Check only if PCLK PLL ACK bit for lane 0 is enabled (Suraj)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-3-mika.kahola@intel.com
Dump missing PLL structure members ssc_enabled and tbt_mode
in order to enhance debugging.
v2: Drop addr_lsb and addr_msb printouts
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-2-mika.kahola@intel.com
Clearing the DP tunnel stream BW in the atomic state involves getting
the tunnel group state, which can fail. Handle the error accordingly.
This fixes at least one issue where drm_dp_tunnel_atomic_set_stream_bw()
failed to get the tunnel group state returning -EDEADLK, which wasn't
handled. This lead to the ctx->contended warn later in modeset_lock()
while taking a WW mutex for another object in the same atomic state, and
thus within the same already contended WW context.
Moving intel_crtc_state_alloc() later would avoid freeing saved_state on
the error path; this stable patch leaves that simplification for a
follow-up.
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.9+
Fixes: a4efae87ec ("drm/i915/dp: Compute DP tunnel BW during encoder state computation")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/7617
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260320092900.13210-1-imre.deak@intel.com
We include the Y/RGB .min_ddb_alloc in the wm state change dumps.
Do the same for .min_ddb_alloc_uv, on the platforms where it is
used.
Also adjust the whitespace in the other debug prints to keep
the values for each wm level lined up across all the lines.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260319114034.7093-10-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Pre-icl doesn't use a separate hardware plane for Y scanout,
and instead it's all handled magically by the hardware. We
do still need to allocate DDB space for the Y color plane
though (PLANE_NV12_BUF_CFG). Include that information in the
debugs so that we know where it ended up.
On icl+ the equivalent information is dumped as the hardware
Y plane's normal ddb allocation.
v2: Use prink field width for ddb_name alignment
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260319114034.7093-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We have skl_print_plane_wm_changes() but the DDB counterpart is
just inline in the main loop. Extract it into a function. We'll
have a second use for this soon.
The "ddb" part is already parametrized in anticipation of the
second user.
v2: Use prink field width for ddb_name alignment
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260319114034.7093-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We currently keep around the full watermarks for the UV plane
on pre-icl, even though the hardware doesn't need most of this
information. The only thing we need to keep is the min_ddb_alloc
for the UV plane. Move that into the main wm->wm[].min_ddb_alloc_uv
alongside the other min_ddb_alloc (used for Y/RGB).
This makes our state tracking match the hardware more closely,
and avoids having to justify everwhere why uv_wm[] is being
ignored.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260319114034.7093-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Extract skl_allocate_plane_ddb_nv12() as the compute counterpart to
skl_check_wm_level_nv12(). Mainly to hide some of the clutter from
skl_crtc_allocate_plane_ddb().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260319114034.7093-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Rename skl_check_nv12_wm_level() to skl_check_wm_level_nv12(). There
will be a sort of DDB counterparts to skl_check_wm_level*(), and
putting the "nv12" part to the end will allow consistent naming.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260319114034.7093-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Group the ddb and data_rate together in the skl_allocate_plane_ddb()
arguments. Upcoming changes will adjust the UV plane handling and
keeing the ddb allocation and the data rate used to calculate it
together will help with clarity.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260319114034.7093-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We don't need is_planar in either the actual watermarks or the
wm_params structure used during the wm computation. Get rid
of both.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260319114034.7093-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
plane_atomic_check() will already have unlinked the
old NV12 planes by the time icl_check_nv12_planes()
gets called. Drop the redundant second unlinking.
Cc: Khaled Almahallawy <khaled.almahallawy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260316163953.12905-4-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Move unlink_nv12_plane() ahead of its first caller to
avoid the forward declaration.
Cc: Khaled Almahallawy <khaled.almahallawy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260316163953.12905-3-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
unlink_nv12_plane() will clobber parts of the plane state
potentially already set up by plane_atomic_check(), so we
must make sure not to call the two in the wrong order.
The problem happens when a plane previously selected as
a Y plane is now configured as a normal plane by user space.
plane_atomic_check() will first compute the proper plane
state based on the userspace request, and unlink_nv12_plane()
later clears some of the state.
This used to work on account of unlink_nv12_plane() skipping
the state clearing based on the plane visibility. But I removed
that check, thinking it was an impossible situation. Now when
that situation happens unlink_nv12_plane() will just WARN
and proceed to clobber the state.
Rather than reverting to the old way of doing things, I think
it's more clear if we unlink the NV12 planes before we even
compute the new plane state.
Cc: stable@vger.kernel.org
Reported-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Closes: https://lore.kernel.org/intel-gfx/20260212004852.1920270-1-khaled.almahallawy@intel.com/
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Fixes: 6a01df2f1b ("drm/i915: Remove pointless visible check in unlink_nv12_plane()")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260316163953.12905-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Put the barrier() before the OP so that anything we read out in
OP and check in COND will actually be read out after the timeout
has been evaluated.
Currently the only place where we use OP is __intel_wait_for_register(),
but the use there is precisely susceptible to this reordering, assuming
the ktime_*() stuff itself doesn't act as a sufficient barrier:
__intel_wait_for_register(...)
{
...
ret = __wait_for(reg_value = intel_uncore_read_notrace(...),
(reg_value & mask) == value, ...);
...
}
Cc: stable@vger.kernel.org
Fixes: 1c3c1dc66a ("drm/i915: Add compiler barrier to wait_for")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260313110740.24620-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Add new quirk (QUIRK_DISABLE_PANEL_REPLAY) for disabling Panel Replay as
quirk for problematic setups. Apply this newly added quirk on Dell XPS 14
DA14260 if specific panel model is installed.
We are observing problems with Dell XPS 14 DA14260. This device has certain
LGD panel model which seems to be problematic. We have seen other LGD panel
model with same OUI is working fine. Due to this we can't apply the quirk
only based on panel OUI. There are also cases where same device model has
differing panel model. We don't want to disable Panel Replay on such
devices. Best we can do is to apply the quirk based on both device model
and panel model.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/7521
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patch.msgid.link/20260317062402.1888624-1-jouni.hogander@intel.com
If CONFIG_DRM_FBDEV_EMULATION is disabled but CONFIG_FRAMEBUFFER_CONSOLE
is turned on, the i915 driver now fails to link:
ERROR: modpost: "intel_fbdev_fb_prefer_stolen" [drivers/gpu/drm/i915/i915.ko] undefined!
Fix the contition to include a check for the symbol that controls compilation
of intel_fbdev_fb.c.
Fixes: 94c7d28612 ("drm/i915/fbdev: Extract intel_fbdev_fb_prefer_stolen()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260304083701.724908-1-arnd@kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Fix a typo inside a comment message from ("generata" -> "generate")
in function do_gmbus_xfer() before calling intel_de_write_fw()
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260316231920.135438-3-samasth.norway.ananda@oracle.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When reading exactly 512 bytes with burst read enabled, the
extra_byte_added path breaks out of the inner do-while without
decrementing len. The outer while(len) then re-enters and gmbus_wait()
times out since all data has been delivered. Decrement len before the
break so the outer loop terminates correctly.
Fixes: d5dc0f43f2 ("drm/i915/gmbus: Enable burst read")
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260316231920.135438-2-samasth.norway.ananda@oracle.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Check if BACKLIGHT_BRIGHTNESS_AUX_SET_CAPABLE bit is
set then EDP_PWMGEN_BIT_COUNT_CAP_MIN and EDP_PWMGEN_BIT_COUNT_CAP_MAX
follow the eDP 1.4b Section 10.3. Which states min should
be >= 1 and max should be >= min. Some legacy panels
do not follow this properly. They set the
BACKLIGHT_BRIGHTNESS_AUX_SET_CAPABLE bit while not correctly
populating the min and max fields leading to a 0 max value.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/7514
Fixes: 40d2f58209 ("drm/i915/backlight: Remove try_vesa_interface")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Pranay Samala <pranay.samala@intel.com>
Link: https://patch.msgid.link/20260316031850.81794-1-suraj.kandpal@intel.com
Initialize the stepping name in display runtime info. This avoids having
to use intel_step_name().
For display device info print at boot, debugfs and snapshot this changes
the unknown step name from ** to N/A, which is more user friendly
anyway.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patch.msgid.link/aab445dedb8235d9fdddfe2ee5bb624cdf453a18.1773663208.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Having intel_get_stepping_info() return the pointer that was passed in
isn't necessary. Just use a pointer to the local variable instead.
The initialization to ** didn't make a difference, because it was always
overridden.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patch.msgid.link/c9affb82fd3e9fb464778013bb7c8fab06232bfd.1773663208.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The function intel_gvt_i2c_handle_aux_ch_write currently does not
support the DP_AUX_I2C_WRITE operation. Notably, we check if
op & 0x1 == DP_AUX_I2C_WRITE (one), and if it does not, assert that
op & 0x1 == DP_AUX_I2C_READ (zero). This is unnecessary because if
op & 0x1 != 1, then op & 0x1 == 0. But beyond that, it probably makes
more sense to check for the condition that is implemented, rather than
check for the condition that is not.
Swap the conditions. We can also get rid of the unnecessary drm_WARN_ON
while we're here.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260204161945.8127-2-jonathan.cavitt@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Static analysis issue:
In assert_port_valid, add a check to ensure port != PORT_NONE, as that
is not a valid port. The check must be explicit to prevent a bad bit
shift operation in the general case via short-circuiting. It's not
likely this will ever come up in a real use case, but it's at least
worth guarding against.
It would probably also be pertinent to modify the behavior of the
port_name function to correctly print PORT_NONE in this case, as
currently the port would be reported as 'port @' by the debugger. But
that should be done separately, and given port_name is mostly just a
debug printing helper function anyways, fixing it is a low priority.
v2:
- Conditional check was backwards. Fix it. (Jani)
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260123152121.7042-2-jonathan.cavitt@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
PSR entry_setup_frames is currently computed directly into struct
intel_dp:intel_psr:entry_setup_frames. This causes a problem if mode change
gets rejected after PSR compute config: Psr_entry_setup_frames computed for
this rejected state is in intel_dp:intel_psr:entry_setup_frame. Fix this by
computing it into intel_crtc_state and copy the value into
intel_dp:intel_psr:entry_setup_frames on PSR enable.
Fixes: 2b981d57e4 ("drm/i915/display: Support PSR entry VSC packet to be transmitted one frame earlier")
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312083710.1593781-3-jouni.hogander@intel.com
PSR/PR parameters might change based on update_m_n or update_lrr. Disable
on update_m_n and update_lrr to ensure proper parameters are taken into use
on next PSR enable in intel_psr_post_plane_update.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15771
Fixes: 2bc98c6f97 ("drm/i915/alpm: Compute ALPM parameters into crtc_state->alpm_state")
Cc: <stable@vger.kernel.org> # v6.19+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312083710.1593781-2-jouni.hogander@intel.com
Add .framebuffer_init, .framebuffer_fini and .framebuffer_lookup to the
bo parent interface. While they're about framebuffers, they're
specifically about framebuffer objects, so the bo interface is a good
enough fit, and there's no need to add another interface struct.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/848d32a44bf844cba3d66e44ba9f20bea4a8352d.1773238670.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
intel_fb_bo.c is i915 core specific code, and should use struct
drm_i915_private instead of struct intel_display.
Switch one DISPLAY_VER() to GRAPHICS_VER(). The check is for < 4, where
they're effectively the same thing.
Reviewed-by: Suraj Kandpal@intel.com>
Link: https://patch.msgid.link/13087bd24bd5af5265ca6af67f086b93e26e311f.1773238670.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Continue i915 and xe separation from display by moving the bo calls to
the display parent interface. Instead of adding all these functions to
intel_parent.[ch], reuse the now vacated intel_bo.[ch], and avoid mass
renames to calls of these functions. This is similar to
intel_display_rpm.[ch].
Make many of the hooks optional to avoid having to implement dummy
functions in xe. Indeed now we can remove many of the existing dummy
functions.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/7899eef2ccf0cd603df69099df065226a0df917b.1773238670.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
