export .set_power_limit & .get_power_limit interface for smu 15.0.8
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
export .get_unique_id interface for smu 15.0.8
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
export .get_gpu_metrics interface for 15.0.8
v2: Remove members already exposed by other interfaces, use mask,
logical conversion (Lijo)
v3: Use correct logic for hbm stacks loop (Lijo)
Remove buffer allocation
v4: Make out of bound check outside loop (Lijo)
v5: fix locking in error case (Alex)
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
export .get_pm_metrics interface for smu 15.0.8.
v2: Make tmo as unsigned (Lijo)
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update dpm table structs to use common definitions for smu_15_0
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Setup driver pptable and initialize data from static metrics table for
smu_v15_0_8
v2: Remove unrelated changes and update description (Lijo)
v3: Use ARRAY_SIZE (Lijo)
v4: Move structure to header file
v5: squash in static metrics support (Asad)
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add initial mode2 support for smu_v15_0_8
v2: Move out non smu code, remove pci save/restore logic (Lijo)
v3: squash in updated msg (Alex)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smu v15_0_8 is the new generation of smu ip block
v2: Squash in rebase changes (Alex)
v3: Squash in fw version check changes (Alex)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_userq_put/get are not needed in case we already holding
the userq_mutex and reference is valid already from queue create
time or from signal ioctl. These additional get/put could be a
potential reason for deadlock in case the ref count reaches zero
and destroy is called which again try to take the userq_mutex.
Due to the above change we avoid deadlock between suspend/restore
calling destroy queues trying to take userq_mutex again.
Cc: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add custom fclk setting support for smu_v13_x_x
v2: Move uclk fix to separate patch, return EOPNOTSUPP in case of dpm
disabled (Lijo)
v3: remove dpm check for filling fclk pstate table (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When SET_UCLK_MAX capability is absent, return -EOPNOTSUPP from
smu_v13_0_6_emit_clk_levels() for OD_MCLK instead of 0. This makes
unsupported OD_MCLK reporting consistent with other clock types
and allows callers to skip the entry cleanly.
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only reapply UCLK soft limits during PP_OD_RESTORE_DEFAULT when the
current max differs from the DPM table max. This avoids redundant
SMC updates and prevents -EINVAL on restore when no change is needed.
Fixes: b7a9003445 ("drm/amd/pm: Allow setting max UCLK on SMU v13.0.6")
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Rework YCbCr422 DSC policy
- Restore full update for tiling change to linear
- add dccg FGCG mask init
- Remove unnecessary completion flag for secure display
- Agument live + capture with CVT case.
- remove dc_clock_limit for apu
- Fix Signed/Unsigned Int Usage Compiler Warning
- Hardcode dtbclk value in bw_params
- Revert inbox0 lock for cursor due to deadlock
- Add 3DLUT DMA broadcast support
- Fix Silence warnings
- export get_power_profile interface for later use
- pg cntl update based on previous asic.
- remove disable_sutter touch pstate debug code
- Refactor DC update checks
- Fix drm_edid leak in amdgpu_dm
- Add Extra SMU Log for dtbclk
- Clamp min DS DCFCLK value to DCN limit
- Update dpia supported configuration
- Multiple DCN42 updates
Acked-by: ChiaHsuan Chung <ChiaHsuan.Chung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Reworked YCbCr4:2:2 Native/Simple policy decision making with DSC
enabled based on DSC caps and stream signal type
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Relja Vojvodic <Relja.Vojvodic@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There was previously a dc debug flag to indicate that tiling
changes should only be a medium update instead of full. The
function get_plane_info_type was refactored to not rely on dc
state, but in the process the logic was unintentionally changed,
which leads to screen corruption in some cases.
[How]
- add flag to tiling struct to avoid full update when necessary
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The completion flag is not used in secure display today.
Remove unnecessary code.
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Add LIVE_CAPTURE_WITH_CVT bit (bit[2]) in union replay_optimization
to control this feature via DalRegKey_ReplayOptimization.
2. Check the bit in mod_power_set_live_capture_with_cvt_activate function
before enabling live capture with CVT.
3. Use LIVE_CAPTURE_WITH_CVT to control if Replay want to send CVT in
live + capture or not.
Reviewed-by: Leon Huang <leon.huang1@amd.com>
Signed-off-by: ChunTao Tso <chuntao.tso@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
current apu pmfw does not support dc_clock_limit
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] Compiler generates compiler warnings when signed enum
constants or literal -1 are implicitly converted to unsigned
integer types, cluttering build output and masking genuine issues.
[How] Use UINT_MAX as the invalid sentinel for unsigned IDs and align
loop/index types to unsigned where appropriate to remove implicit
signed-to-unsigned conversions, with no functional behavior change.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
dtbclk should always be 600MHz. Previous logic was to get the real value
from SMU, but this returns 0 when dtbclk is off. Not a problem during
boot when pre-OS enables dtbclk, but PnP was broken due to this.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
The DPM clocks on DCN42 are currently read on every dm_resume, which can
cause in gpu memory freeing while the device is still in suspend.
Move the DPM clock read functionality to clk_mgr_construct() so it
completes once on driver enablement.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
A deadlock occurs when using inbox0 lock for cursor operations on
PSR-SU and Replays that does not when using the inbox1 locking path.
This is because of a priority inversion issue where inbox1 work
cannot be serviced while holding the HW lock from driver and sending
cursor notifications to DMUB.
Typically the lower priority of inbox1 for the lock command would
allow the PSR and Replay FSMs to complete their transition prior
to giving driver the lock but this is no longer the case with inbox0
having the highest priority in servicing.
[How]
This will reintroduce any synchronization bugs that were there
with Replay or PSR-SU touching the cursor at the same time as driver.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
A single HUBP can be used to fetch 3DLUT and broadcast to a
single HUBP. Add logic to select the top pipe for a given
plane and use it's HUBP as the broadcast source for multiple
MPC's.
Reviewed-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also affects: freesync, hdcp, info_packet, power
[Why] Resolve compiler warnings by marking unused parameters explicitly.
[How] In .c/.h keep parameter names in signatures and add a line with
`(void)param;` inside the function body
Preserved function signatures and avoids breaking code paths that
may reference the parameter under conditional compilation.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
export dcn401 get_power_profile for later asic.
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
switch to well tested sequence.
Reviewed-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
diags is using disable_stutter, this will cause issue when pstate switch
enabled
Reviewed-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
DC currently has fragmented definitions of update types. This changes
consolidates them into a single interface, and adds expanded
functionality to accommodate all use cases.
- adds `dc_check_update_state_and_surfaces_for_stream` to determine
update type including state, surface, and stream changes.
- adds missing surface/stream update checks to
`dc_check_update_surfaces_for_stream`
- adds new update type `UPDATE_TYPE_ADDR_ONLY` to accomodate flows where
further distinction from `UPDATE_TYPE_FAST` was needed
- removes caller reliance on `enable_legacy_fast_update` to determine
which commit function to use, instead embedding it in the update type
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
When a sink is connected, aconnector->drm_edid was overwritten without
freeing the previous allocation, causing a memory leak on resume.
[HOW]
Free the previous drm_edid before updating it.
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN42 was using UClk values instead of MemClk from MemPstateTable, causing
DML to see half the actual DRAM bandwidth on DDR5 systems and reject high
refresh rate modes.
[How]
Change dcn42_init_clocks() to use MemPstateTable[i].MemClk instead of
MemPstateTable[i].UClk for memclk_mhz initialization.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alexander Chechik <alexander.chechik@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
need to check dtbclk in log for confirmation
Reviewed-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The DCN42 underflow detection functions in dcn42_optc.c use
OPTC_RSMU_UNDERFLOW register but the register offset definitions
were missing from dcn_4_2_0_offset.h and dcn42_resource.h.
[How]
Add missing register definitions.
Fixes: e56e3cff2a ("drm/amd/display: Sync dcn42 with DC 3.2.373")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Chuanyu Tseng <Chuanyu.Tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some illegal combination of input flags were not checked and we need to
take the PDEs into account when returning the fence as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
DCN has a global limit for minimum DS DCFCLK during any operation.
Adhere to that limit and add a debug flag.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Chuanyu Tseng <Chuanyu.Tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We don't want to update the timeout threshold for stall recovery in
firmware dynamically for DCN42 as we're not using FAMS.
Firmware should own programming of this register since the recovery
can be broken if driver updates the value to 0.
[How]
Split program_arbiter for dcn42 and skip the part that updates the
timeout threshold.
Reviewed-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Chuanyu Tseng <Chuanyu.Tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This aligning commit combines:
- fix dcn42 det programming)
- fix missing dcn42 pointers
- fix SDPIF_Request_Rate_Limit programming value
V2: Add back dchvm_init for DCN42
Reviewed-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Chuanyu Tseng <Chuanyu.Tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add DCN42 portion that was stripped during previously.
Fixes: 8333f22e44 ("drm/amd/display: Query DC for gfx handling when setting linear tiling")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Chuanyu Tseng <Chuanyu.Tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move it out of smu present block for cases where it isn't
Reviewed-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Chuanyu Tseng <Chuanyu.Tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
System Hang when system enters to S0i3 w/ iGPU
some link_enc are NULL due to BIOS integration info table not correct,
but driver should have enough null pointer protection.
Reviewed-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Chuanyu Tseng <Chuanyu.Tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
The DPM clocks on DCN42 are currently read on every dm_resume, which can
cause in gpu memory freeing while the device is still in suspend.
Move the DPM clock read functionality to clk_mgr_construct() so it
completes once on driver enablement.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Chuanyu Tseng <Chuanyu.Tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN401 didn't have a MRQ present so these fields didn't exist.
They are still present on DCN42 so we need to continue programming
them like we did on DCN35 or we can block have poor meta requesting
efficiency which blocks p-state.
[How]
Add `hubp42_program_requestor` which takes DML21 input and programs
the registers like DCN35 and prior.
Reviewed-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Chuanyu Tseng <Chuanyu.Tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
dml2 based on num_enabled clock != 2 to do clock ramming to dpm.
apu has 8 levels dispclk/dppclk/dcfclk/fclk, but only 4 levels of memclk.
to avoid mapping dispclk/dppclk to DPM clock,
based on arch review, force dispclk/dppclk num_level as 2.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Chuanyu Tseng <Chuanyu.Tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Init a flag to track if dpia enabled previously
and update that to boot options.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Chuanyu Tseng <Chuanyu.Tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PASID resue could cause interrupt issue when process
immediately runs into hw state left by previous
process exited with the same PASID, it's possible that
page faults are still pending in the IH ring buffer when
the process exits and frees up its PASID. To prevent the
case, it uses idr cyclic allocator same as kernel pid's.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_device_get_job_timeout_settings() passes a pointer directly
to the global amdgpu_lockup_timeout[] buffer into strsep().
strsep() destructively replaces delimiter characters with '\0'
in-place.
On multi-GPU systems, this function is called once per device.
When a multi-value setting like "0,0,0,-1" is used, the first
GPU's call transforms the global buffer into "0\00\00\0-1". The
second GPU then sees only "0" (terminated at the first '\0'),
parses a single value, hits the single-value fallthrough
(index == 1), and applies timeout=0 to all rings — causing
immediate false job timeouts.
Fix this by copying into a stack-local array before calling
strsep(), so the global module parameter buffer remains intact
across calls. The buffer is AMDGPU_MAX_TIMEOUT_PARAM_LENGTH
(256) bytes, which is safe for the stack.
v2: wrap commit message to 72 columns, add Assisted-by tag.
v3: use stack array with strscpy() instead of kstrdup()/kfree()
to avoid unnecessary heap allocation (Christian).
This patch was developed with assistance from Claude (claude-opus-4-6).
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Look at hqd_queue_priority rather than hqd_pipe_priority.
In practice, it didn't matter as both were always set for
kernel queues, but that will change in the future.
Fixes: 2e216b1e6b ("drm/amdgpu/gfx11: handle priority setup for gfx pipe1")
Reviewed-by：Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
