svc_reserve() and svc_xprt_release_slot() call
svc_xprt_enqueue() after modifying xpt_reserved or
xpt_nr_rqsts. The purpose is to re-dispatch the
transport when write-space or a slot becomes available.
However, when neither XPT_DATA nor XPT_DEFERRED is
set, no thread can make progress on the transport and
the enqueue accomplishes nothing.
Trace data from a 256KB NFSv3 WRITE workload over RDMA
shows 11.2 svc_xprt_enqueue() calls per RPC. Of these,
6.9 per RPC lack XPT_DATA and exit svc_xprt_ready()
immediately after executing the smp_rmb(), READ_ONCE(),
and tracepoint. svc_reserve() and svc_xprt_release_slot()
account for roughly five of these per RPC.
A new helper, svc_xprt_resource_released(), checks
XPT_DATA | XPT_DEFERRED before calling
svc_xprt_enqueue(). The existing smp_wmb() barriers
are upgraded to smp_mb() to ensure the flags check
observes a concurrent producer's set_bit(XPT_DATA).
Each producer (svc_rdma_wc_receive, etc.) both sets
XPT_DATA and calls svc_xprt_enqueue(), so even if the
check reads a stale value, the producer's own enqueue
provides a fallback path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The orig_node member of struct batadv_neigh_node is no longer used in
B.A.T.M.A.N. IV. But batadv_neigh_node_create() is still storing it.
Only batadv_v_ogm_route_update() uses it to check if we route toward
it - not needing the data stored in the batadv_orig_node object itself,
but merely a pointer to identify the originator.
The field cannot hold a proper reference because that would create a
reference cycle, so it must never be dereferenced. Rename it to
orig_node_id and mark it __private to make any future attempt to
dereference it immediately noticeable.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Both OGMv1 (on the primary interface) and OGM2 unconditionally reallocated
their packet buffer on every transmission cycle, regardless of whether the
required size had changed. This meant a kfree/kmalloc pair even when the
TVLV payload size was identical to the previous send.
Introduce struct batadv_ogm_buf to encapsulate the OGM packet buffer
together with its current length, allocated capacity, and fixed header
length. This consolidates the separate buf/len arguments that were
previously threaded through each call site.
In batadv_tvlv_realloc_packet_buff(), the capacity is rounded up to the
next power of two so that small growth or shrinkage in TVLV data does not
trigger a reallocation. When kmalloc fails but the existing buffer is large
enough to hold the new data, the oversized buffer is reused rather than
returning an error.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The commit 6043a632dd06 ("batman-adv: reject oversized global TT response
buffers") introduced an open-coded check to ensure that the allocated
buffer size can be stored in a u16. The check_add_overflow() helper can
perform the addition and overflow check in one step, so use that instead.
Acked-by: Antonio Quartulli <antonio@mandelbit.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The last TT version number of an meshif is only accessed as plain
loads/stores and does not require full atomic_t semantics. Convert to an
native integer and replace its users with READ_ONCE()/WRITE_ONCE() to avoid
load/store tearing.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The maximum packet size of an meshif is only accessed as plain loads/stores
and does not require full atomic_t semantics. Convert to a native integer
and replace its users with READ_ONCE()/WRITE_ONCE() to avoid load/store
tearing.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The mesh state is only accessed as plain loads/stores and does not require
full atomic_t semantics. Convert to an enum and replace its users with
READ_ONCE()/WRITE_ONCE() to avoid load/store tearing.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The vlan configuration values are only accessed as plain loads/stores and
do not require full atomic_t semantics. Convert these fields to native
integer types and replace their users with READ_ONCE()/WRITE_ONCE() to
avoid load/store tearing.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The hardif configuration values are only accessed as plain loads/stores and
do not require full atomic_t semantics. Convert these fields to native
integer types and replace their users with READ_ONCE()/WRITE_ONCE() to
avoid load/store tearing.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The meshif configuration values are only accessed as plain loads/stores and
do not require full atomic_t semantics. Convert these fields to native
integer types and replace their users with READ_ONCE()/WRITE_ONCE() to
avoid load/store tearing.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Previously, wifi_flags were stored directly in batadv_hard_iface, which is
created for every network interface on the system (including those never
attached to a mesh interface). This wastes memory and complicates the
long-term goal of lazily allocating batadv_hard_iface only for interfaces
that actually join a mesh.
The problem is that several batman-adv features need wifi detection for
net_devices (and their underlying devices) regardless of whether a
batadv_hard_iface exists for them:
* B.A.T.M.A.N. IV TQ hop penalty calculation
* B.A.T.M.A.N. V ELP probing / throughput estimation
* AP isolation
To decouple wifi detection from batadv_hard_iface lifetime, introduce a
global rhashtable (batadv_wifi_net_devices) mapping net_device pointers to
batadv_wifi_net_device_state objects. Only net_devices that are actually
detected as (indirect) wifi interfaces occupy an entry, keeping the common
(non-wifi) case allocation-free.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
64bit byteorder conversion is broken when several registers need to be
converted because the source register array advances in steps for 4 bytes
instead of 8:
for (i = ...
src64 = nft_reg_load64(&src[i]);
~~~~~ u32 *src
nft_reg_store64(&dst64[i],
Remove the multi-register support, it has other issues as well:
Pablo points out that commit
caf3ef7468 ("netfilter: nf_tables: prevent OOB access in nft_byteorder_eval")
alters semantics: before the loop operated on registers, i.e.
for ( ... )
dst32[i] = htons((u16)src32[i])
.. but after the patch it will operate on bytes, which makes this
useless to convert e.g. concatenations, which store each compound
in its own register.
Multi-convert of u32 has one theoretical application:
ct mark . meta mark . tcp dport @intervalset
Because ct mark and meta mark are host byte order, use with
intervals has to convert the byteorder for ct/meta mark value
to network byte order (bigendian).
nftables emits this:
[ meta load mark => reg 1 ]
[ byteorder reg 1 = hton(reg 1, 4, 4) ]
[ ct load mark => reg 9 ]
[ byteorder reg 9 = hton(reg 9, 4, 4) ]
...
I.e. two separate calls. Theoretically it could be changed to do:
[ meta load mark => reg 1 ]
[ ct load mark => reg 9 ]
[ byteorder reg 1 = htonl(reg 1, 4, 8) ]
...
But then all it would take to change the set to
meta mark . tcp dport . ct mark
... and we'd be back to two "byteorder" calls. IOW, support to
convert a range of registers is both dysfunctional and dubious.
Simplify this: remove the feature.
Pablo Neira Ayuso points out that nftables before 1.1.0 can generate
incorrect byteorder conversions, see 9fe58952c45a,
"evaluate: skip byteorder conversion for selector smaller than 2 bytes"
in nftables.git). Affected rulesets fail to load with this change and
old userspace due to 'len != size' check.
Fixes: c301f0981f ("netfilter: nf_tables: fix pointer math issue in nft_byteorder_eval()")
Cc: <stable+noautosel@kernel.org> # may break rule load with old nftables versions
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Link: https://lore.kernel.org/netfilter-devel/20240206104336.ctigqpkunom2ufmn@lion.mk-sys.cz/
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The ebtables SNAT target keeps the Ethernet source address rewrite
behind skb_ensure_writable(skb, 0). This is intentional: at the bridge
ebtables hooks the Ethernet header is addressed through
skb_mac_header()/eth_hdr(), while skb->data points at the Ethernet
payload. Asking skb_ensure_writable() for ETH_HLEN bytes would check
the payload, not the Ethernet header, and would reintroduce the small
packet regression fixed by commit 63137bc588.
However, the optional ARP sender hardware address rewrite is different.
It writes through skb_store_bits() at an offset relative to skb->data:
skb_store_bits(skb, sizeof(struct arphdr), info->mac, ETH_ALEN)
skb_header_pointer() only safely reads the ARP header; it does not make
the later sender hardware address range writable. If that range is
still held in a nonlinear skb fragment backed by a splice-imported file
page, skb_store_bits() maps the frag page and copies the new MAC address
directly into it.
Ensure the ARP SHA range is writable before reading the ARP header and
before calling skb_store_bits().
Fixes: 63137bc588 ("netfilter: ebtables: Fixes dropping of small packets in bridge nat")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
I noticed this issue while looking at a historic syzbot report [1].
A rule like the one below is enough to trigger the bug:
table ip t {
chain pre {
type filter hook prerouting priority raw;
ct zone set 1
ct original saddr 1.2.3.4 accept
}
}
The first expression attaches a per-cpu template ct via
nft_ct_set_zone_eval() (nf_ct_tmpl_alloc -> kzalloc, tuple is all
zero, nf_ct_l3num(ct) == 0). The next expression then calls
nft_ct_get_eval() on the same skb, treats the template as a real ct
and hits the 16-byte memcpy path. With dreg at NFT_REG32_15 this
overflows past struct nft_regs on the kernel stack; with smaller
dreg values it silently clobbers adjacent registers.
Reject template ct at the eval entry and in nft_ct_get_fast_eval(),
mirroring the check nft_ct_set_eval() already has. Additionally,
bound the address copy in NFT_CT_SRC / NFT_CT_DST by priv->len
instead of by nf_ct_l3num(ct): nf_ct_get_tuple() zeroes the tuple
before pkt_to_tuple() fills in only the protocol-relevant leading
bytes, so the trailing bytes of tuple->{src,dst}.u3.all are
well-defined zero. priv->len is validated at rule load, so the
copy size is now bounded by the destination register rather than
by an untrusted field on the conntrack.
[1]: https://syzkaller.appspot.com/bug?id=389cf09cb72926114fce90dc85a2c3231dcb647c
Fixes: 45d9bcda21 ("netfilter: nf_tables: validate len in nft_validate_data_load()")
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nft_tunnel_obj_destroy() calls metadata_dst_free() which directly
kfree()s the metadata_dst, ignoring the dst_entry refcount. Packets
that took a reference via dst_hold() in nft_tunnel_obj_eval() and
are still queued (e.g. in a netem qdisc) are left with a dangling
pointer. When these packets are eventually dequeued, dst_release()
operates on freed memory.
Replace metadata_dst_free() with dst_release() so the metadata_dst
is freed only after all references are dropped. The dst subsystem
already handles metadata_dst cleanup in dst_destroy() when
DST_METADATA is set.
Fixes: af308b94a2 ("netfilter: nf_tables: add tunnel support")
Cc: stable@vger.kernel.org
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When parsing fails after we've matched the command string we
should bail out instead of trying to match a different command.
This helper should be deprecated, given prevalence of TLS I doubt it has
any relevance in 2026.
Fixes: 869f37d8e4 ("[NETFILTER]: nf_conntrack/nf_nat: add IRC helper port")
Closes: https://sashiko.dev/#/patchset/20260525182924.28456-1-fw%40strlen.de
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
As the synproxy infrastructure register netfilter hooks on-demand when a
user adds the first iptables target or nftables expression, if done
concurrently they can race each other.
Introduce a mutex to serialize the refcount control blocks access from
both frontends. While a per namespace mutex might be more efficient, it
is not needed for target/expression like SYNPROXY.
Fixes: ad49d86e07 ("netfilter: nf_tables: Add synproxy support")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This was reported by Sashiko [1].
The RCU walk over rt->fib6_siblings can spin forever if rt is unlinked
mid-iteration: rt->fib6_siblings.next still points into the old ring,
so the loop never meets &rt->fib6_siblings as its terminator.
fib6_purge_rt() always does WRITE_ONCE(rt->fib6_nsiblings, 0) before
list_del_rcu(), so readers can use rt->fib6_nsiblings == 0 as the
detach signal. The same pattern is used in fib6_info_uses_dev() and
rt6_nlmsg_size().
[1]: https://sashiko.dev/#/patchset/20260520023411.391233-1-jiayuan.chen%40linux.dev
Suggested-by: Florian Westphal <fw@strlen.de>
Fixes: 1c32b24c23 ("netfilter: nft_fib_ipv6: switch to fib6_lookup")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
ip_vs_edit_service() while unbinding the old scheduler clears
the svc->scheduler ptr after the scheduler module initiates
RCU callbacks. This can cause packets to use the old
scheduler at the time when svc->sched_data is already freed
after RCU grace period.
Fix it by clearing the ptr early in ip_vs_unbind_scheduler(),
before the done_service method schedules any RCU callbacks.
Also, if the new scheduler fails to initialize when replacing
the old scheduler, try to restore the old scheduler while still
returning the error code.
Link: https://sashiko.dev/#/patchset/20260519015506.634185-1-rosenp%40gmail.com
Fixes: 05f00505a8 ("ipvs: fix crash if scheduler is changed")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
With PREEMPT_RCU this triggers a splat because smp_processor_id() can be
preempted while inside a RCU critical section. If xt_NFQUEUE target is
invoked via nft_compat_eval() path, we are inside a RCU critical
section.
Just use the raw version instead.
Fixes: 0ca743a559 ("netfilter: nf_tables: add compatibility layer for x_tables")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Conflicts:
drivers/net/ethernet/microsoft/mana/mana_en.c:
17bfe0a8c0 ("net: mana: Add NULL guards in teardown path to prevent panic on attach failure")
d07efe5a6e ("net: mana: Use per-queue allocation for tx_qp to reduce allocation size")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
iptfs_consume_frags() transfers paged fragments from one socket buffer
to another but fails to propagate the SKBFL_SHARED_FRAG flag. This is
the same class of bug that was fixed in skb_try_coalesce() for
CVE-2026-46300: when fragments backed by read-only page-cache pages are
merged, the marker indicating their shared nature must be preserved so
that ESP can decide correctly whether in-place encryption is safe.
Apply the same two-line fix used in skb_try_coalesce() to
iptfs_consume_frags().
Fixes: b96ba312e2 ("xfrm: iptfs: share page fragments of inner packets")
Cc: stable@vger.kernel.org # 6.14+
Signed-off-by: Takao Sato <takaosato1997@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Chris Adams reported that preserving insertion order for same-scope
addresses is causing SSH connections to be dropped after stopping a VM
while running NetworkManager.
NetworkManager caches the IPv6 address configuration, when a RA arrives,
it determines the list of addresses to configure and checks if the
addresses are already in the right order in the kernel. If they aren't,
NetworkManager removes and re-adds them to achieve the desired order.
As the order changes, NetworkManager is confused and reconfigures the
addresses on every update. In addition, this would also affect to cloud
tooling that relies on IPv6 addresses order to identify primary and
secondaries addresses.
This reverts commit cb3de96eea.
Fixes: cb3de96eea ("ipv6: preserve insertion order for same-scope addresses")
Reported-by: Chris Adams <linux@cmadams.net>
Closes: https://lore.kernel.org/netdev/20260521135310.GC977@cmadams.net/
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260529112357.5079-1-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=NQJ5
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2026-05-29' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2026-05-29
1) xfrm: route MIGRATE notifications to caller's netns
Thread the caller's netns through km_migrate() so that
MIGRATE notifications go to the issuing netns, fixing both the
init_net listener leak and MOBIKE notifications inside
non-init netns. From Maoyi Xie.
2) xfrm: ipcomp: Free destination pages on acomp errors
Move the out_free_req label up so that allocated destination
pages are released on decompression errors, not only on success.
From Herbert Xu.
3) xfrm: Check for underflow in xfrm_state_mtu
Reject configurations that cause xfrm_state_mtu() to underflow,
preventing a negative TFCPAD value from becoming a memset size
that triggers an out-of-bounds write of several terabytes.
From David Ahern.
4) xfrm: ah: use skb_to_full_sk in async output callbacks
Convert the possibly-incomplete skb->sk to a full socket pointer
in async AH callbacks so that a request_sock or timewait_sock
never reaches xfrm_output_resume() downstream consumers.
From Michael Bommarito.
5) Add and revert: esp: fix page frag reference leak on skb_to_sgvec failure
The patch does not fix te issue completely.
6) xfrm: esp: restore combined single-frag length gate
Check the aligned post-trailer combined length against a page limit
in the fast path, preventing skb_page_frag_refill() from falling
back to a page too small for the destination scatterlist.
From Jingguo Tan.
7) xfrm: iptfs: reset runtime state when cloning SAs
Reinitialise the clone's mode_data runtime objects before
publishing it, preventing queued skbs from being freed with
list state copied from the original SA when migration fails.
From Shaomin Chen.
8) xfrm: move policy_bydst RCU sync from per-netns .exit to .pre_exit
Flush policy tables and drain the workqueue in a .pre_exit handler
so that cleanup_net() pays one RCU grace period per batch instead
of one per namespace, fixing stalls at high CLONE_NEWNET rates.
From Usama Arif.
9) xfrm: input: hold netns during deferred transport reinjection
Take a netns reference when queueing deferred transport reinjection
work and drop it after the callback completes, keeping the skb->cb
net pointer valid until the deferred work runs.
From Zhengchuan Liang.
* tag 'ipsec-2026-05-29' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
Revert "esp: fix page frag reference leak on skb_to_sgvec failure"
xfrm: input: hold netns during deferred transport reinjection
xfrm: move policy_bydst RCU sync from per-netns .exit to .pre_exit
xfrm: iptfs: reset runtime state when cloning SAs
xfrm: esp: restore combined single-frag length gate
esp: fix page frag reference leak on skb_to_sgvec failure
xfrm: ah: use skb_to_full_sk in async output callbacks
xfrm: Check for underflow in xfrm_state_mtu
xfrm: ipcomp: Free destination pages on acomp errors
xfrm: route MIGRATE notifications to caller's netns
====================
Link: https://patch.msgid.link/20260529092648.3878973-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When SKBFL_MANAGED_FRAG_REFS is set, frag pages are not refcounted but
their lifetime is controlled by the attached ubuf_info. To make a copy
of the skb_shared_info, we either should clear the flag and reference
the frags, or keep the flag and have frags unreferenced.
pskb_carve_inside_header() and pskb_carve_inside_nonlinear() don't
follow the rule and thus can leak page references. Let's clear
SKBFL_MANAGED_FRAG_REFS from the original skb to fix it. It's the
simplest way to address it, but there are more performant ways to do
that if it ever becomes a problem.
Link: https://lore.kernel.org/all/20260523085809.26331-1-nvminh232@clc.fitus.edu.vn/
Fixes: 753f1ca4e1 ("net: introduce managed frags infrastructure")
Reported-by: Minh Nguyen <minhnguyen.080505@gmail.com>
Reported-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/1e2086aa69217d7f9c8da3d38f5be7160f1b4cd1.1779993185.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Found while auditing the same pattern Sashiko reported in
rt6_fill_node() [1]. Apply the same fix as
commit f8d8ce1b51 ("ipv6: fix possible infinite loop in fib6_info_uses_dev()").
Writers holding tb6_lock can list_del_rcu(&first->fib6_siblings)
without waiting for RCU readers; first->fib6_siblings.next then
still points into the old ring and this softirq-side walker never
reaches &first->fib6_siblings as its terminator. fib6_purge_rt()
always WRITE_ONCE()s first->fib6_nsiblings to 0 before
list_del_rcu(), so an inside-loop check is a reliable detach signal.
[1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev
Fixes: d9ccb18f83 ("ipv6: Fix soft lockups in fib6_select_path under high next hop churn")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260527053133.180695-2-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko reported this issue [1]. Apply the same fix as
commit f8d8ce1b51 ("ipv6: fix possible infinite loop in fib6_info_uses_dev()").
Writers holding tb6_lock can list_del_rcu(&rt->fib6_siblings)
without waiting for RCU readers; rt->fib6_siblings.next then still
points into the old ring and this softirq-side walker never reaches
&rt->fib6_siblings, causing a CPU stall. fib6_del_route() always
WRITE_ONCE()s rt->fib6_nsiblings to 0 before list_del_rcu(), so an
inside-loop check is a reliable detach signal.
[1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev
Fixes: d9ccb18f83 ("ipv6: Fix soft lockups in fib6_select_path under high next hop churn")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260527053133.180695-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When bpf_msg_push_data() inserts data in the middle of a scatterlist
entry, it splits the original entry into a left fragment and a right
fragment.
The right fragment offset is page-local, but the code advances it with
`start`, which is the message-global insertion point. For inserts into a
non-first SG entry, this over-advances the offset and leaves the split
layout inconsistent.
Advance the right fragment offset by the fragment-local delta,
`start - offset`, which matches the length removed from the front of the
original entry.
Fixes: 6fff607e2f ("bpf: sk_msg program helper bpf_msg_push_data")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Yuqi Xu <xuyq21@lenovo.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Link: https://patch.msgid.link/8b129d10566aa3eb43f61a8f9757bcf51707d324.1779636774.git.xuyq21@lenovo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
virtio_transport_send_pkt_info() allocates or reuses the zerocopy uarg
before entering the send loop, but virtio_transport_alloc_skb() still
fills the skb before it inherits that uarg. When fixed-buffer vectored
zerocopy hits MAX_SKB_FRAGS, io_sg_from_iter() may partially attach
managed frags and return -EMSGSIZE. The rollback path call kfree_skb()
to free an skb that carries SKBFL_MANAGED_FRAG_REFS but no uarg, so
skb_release_data() falls through to ordinary frag unref.
Pass the uarg into virtio_transport_alloc_skb() and bind it immediately
before virtio_transport_fill_skb(). This keeps control or no-payload skbs
untouched while ensuring success and rollback share one lifetime rule.
Fixes: 581512a6dc ("vsock/virtio: MSG_ZEROCOPY flag support")
Signed-off-by: Lin Ma <malin89@huawei.com>
Signed-off-by: Rongzhen Cui <cuirongzhen@huawei.com>
Signed-off-by: Jingguo Tan <tanjingguo@huawei.com>
Acked-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260527023301.1075581-1-malin89@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
batadv_gw_election() only needs to test whether gw.reselect was set and
clear it afterwards. Replace the batadv_atomic_dec_not_zero()
[atomic_add_unless(..., -1, 0)] call with atomic_xchg(..., 0) to simplify
the logic and make the intent more explicit.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Some of the recent fixes required features from new header files. There is
currently no build problem because transitive includes take care of it. But
the batman-adv source code tries to avoid the dependency to
transitive/implicite includes because it has no control over them and they
might get removed at some point.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Bumping the version number on the first pull request after each merge
window was deemed inappropriate for an in-tree component. The version
number carries little meaningful information in the context of the Linux
kernel release model, where stable and distribution might all carry
slightly different patches (without any change to the batman-adv version).
Instead, expose a UTS_RELEASE-based string to consumers of the netlink and
ethtool interfaces. To avoid recompilation for each (re)generate of
generated/utsrelease.h, init_utsname()->release is used in code which can
dynamically retrieve the version string. The MODULE_VERSION is moved to a
separate file because it doesn't support dynamic retrieval of the version
string (but constant "at compile time" string) and it is required for the
/sys/module/batman_adv/version. The latter is unfortunately still required
by userspace tools.
Link: https://lore.kernel.org/r/20210203163302.13e8a2a7@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com
Link: https://lore.kernel.org/r/YnfjtpuAaH+Zkf9S@unreal
Link: https://lore.kernel.org/r/Y9faTA0rNSXg%2FsLD@nanopsycho
Signed-off-by: Sven Eckelmann <sven@narfation.org>
This reverts commit 2982e599ff.
The patch does not fully fix the issue and the Author does
not match the 'Signed-off-by:' tag, so revert it for now.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The only user of msg->msg_iocb was AF_ALG, but that's deprecated.
It can be removed entirely at the cost of only supporting synchronous
operations. This doesn't break userspace, which will silently block
(for a bounded amount of time) in io_submit instead of operating
asynchronously.
This also makes struct msghdr smaller, helping every other caller of
sendmsg().
Signed-off-by: Demi Marie Obenour <demiobenour@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
%pGg produces nice readable output and decouples the format string from
the size of gfp_t.
Link: https://lore.kernel.org/20260326-gfp64-v2-4-d916021cecdf@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Acked-by: Allison Henderson <achender@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Allison Collins <allison.henderson@oracle.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kacinski <kuba@kernel.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Marco Elver <elver@google.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: Thomas Zimemrmann <tzimmermann@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When p9_client_rpc() is called with type P9_TFLUSH and the transport
has no peer (e.g. fd transport backed by pipes with no 9p server),
a fatal signal causes an infinite loop:
again:
err = io_wait_event_killable(req->wq, ...)
/* SIGKILL wakes the task, returns -ERESTARTSYS */
if (err == -ERESTARTSYS && c->status == Connected &&
type == P9_TFLUSH) {
sigpending = 1;
clear_thread_flag(TIF_SIGPENDING);
goto again;
}
clear_thread_flag() clears TIF_SIGPENDING before jumping back to
io_wait_event_killable(). signal_pending_state() checks TIF_SIGPENDING,
finds it zero, and the task goes to sleep again. The task can only wake
on the next signal delivery that calls signal_wake_up() and sets
TIF_SIGPENDING again. When that happens the loop repeats, clears
TIF_SIGPENDING, and sleeps again indefinitely.
This is triggered in practice by coredump_wait(): when a thread in a
multi-threaded process causes a coredump (e.g. via SIGSYS from Syscall
User Dispatch), coredump_wait() sends SIGKILL to all other threads and
waits for them to call mm_release(). If one of those threads is blocked
in p9_client_rpc() over an fd transport with no peer, it enters the
P9_TFLUSH loop and never calls mm_release(), so coredump_wait() stalls
forever:
INFO: task syz.0.18:676 blocked for more than 143 seconds.
Not tainted 6.12.77+ #1
task:syz.0.18 state:D stack:27600 pid:676 tgid:673 ppid:630 flags:0x00000004
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5344 [inline]
__schedule+0xcb4/0x5d50 kernel/sched/core.c:6724
__schedule_loop kernel/sched/core.c:6801 [inline]
schedule+0xe5/0x350 kernel/sched/core.c:6816
schedule_timeout+0x253/0x290 kernel/time/timer.c:2593
do_wait_for_common kernel/sched/completion.c:95 [inline]
__wait_for_common+0x409/0x600 kernel/sched/completion.c:116
wait_for_common kernel/sched/completion.c:127 [inline]
wait_for_completion_state+0x1d/0x40 kernel/sched/completion.c:264
coredump_wait fs/coredump.c:448 [inline]
do_coredump+0x854/0x4350 fs/coredump.c:629
get_signal+0x1425/0x2730 kernel/signal.c:2903
arch_do_signal_or_restart+0x81/0x880 arch/x86/kernel/signal.c:337
exit_to_user_mode_loop kernel/entry/common.c:111 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0xf9/0x160 kernel/entry/common.c:218
do_syscall_64+0x102/0x220 arch/x86/entry/common.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Fix: check fatal_signal_pending() before clearing TIF_SIGPENDING in the
P9_TFLUSH retry loop. At that point TIF_SIGPENDING is still set, so
fatal_signal_pending() works correctly. If a fatal signal is pending,
jump to recalc_sigpending to restore TIF_SIGPENDING and return
-ERESTARTSYS to the caller.
The same defect is present in stable kernels back to 5.4. On those
kernels the infinite loop is broken earlier by a second SIGKILL from
the parent process (e.g. kill_and_wait() retrying after a timeout),
resulting in a zombie process and a shutdown delay rather than a
permanent D-state hang, but the underlying flaw is the same.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 91b8534fa8 ("9p: make rpc code common and rework flush code")
Closes: https://syzkaller.appspot.com/bug?extid=3ce7863f8fc836a427e7
Cc: stable@vger.kernel.org
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Message-ID: <20260415155237.182891-1-kovalev@altlinux.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
The kdoc for page_pool_get_stats() is missing a Returns: statement.
Looking at this function, I have no idea what is the purpose of
the bool it returns. My guess was that maybe the static inline
stub returns false if CONFIG_PAGE_POOL_STATS=n but such static
inline helper doesn't exist at all. All callers pass a pointer
to a struct on the stack. Make this function void.
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260526155722.2790742-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Netlink support for querying page pool stats has been
proven out in production, let's remove the mention of the
helper meant for dumping page pool stats into ethtool -S
from the docs.
Call out in the kdoc that this API is deprecated.
Some drivers may not be able to use the Netlink API
(if page pool is shared across netdevs). So the old API
is not _completely_ dead. But we shouldn't advertise it.
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260526155722.2790742-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- hci_core: Rework hci_dev_do_reset() to use hci_sync functions
- hci_conn: Fix memory leak in hci_le_big_terminate()
- hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device close
- hci_sync: Reset device counters in hci_dev_close_sync()
- hci_sync: fix UAF in hci_le_create_cis_sync
- L2CAP: Fix possible crash on l2cap_ecred_conn_rsp
- L2CAP: fix chan ref leak in l2cap_chan_timeout() on !conn
- L2CAP: use chan timer to close channels in cleanup_listen()
- L2CAP: clear chan->ident on ECRED reconfiguration success
- ISO: fix UAF in iso_recv_frame
- ISO: serialize iso_sock_clear_timer with socket lock
- HIDP: fix missing length checks in hidp_input_report()
- 6lowpan: check skb_clone() return value in send_mcast_pkt()
- btusb: Allow firmware re-download when version matches
- hci_qca: Use 100 ms SSR delay for rampatch and NVM loading
-----BEGIN PGP SIGNATURE-----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=7Nv9
-----END PGP SIGNATURE-----
Merge tag 'for-net-2026-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_core: Rework hci_dev_do_reset() to use hci_sync functions
- hci_conn: Fix memory leak in hci_le_big_terminate()
- hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device close
- hci_sync: Reset device counters in hci_dev_close_sync()
- hci_sync: fix UAF in hci_le_create_cis_sync
- L2CAP: Fix possible crash on l2cap_ecred_conn_rsp
- L2CAP: fix chan ref leak in l2cap_chan_timeout() on !conn
- L2CAP: use chan timer to close channels in cleanup_listen()
- L2CAP: clear chan->ident on ECRED reconfiguration success
- ISO: fix UAF in iso_recv_frame
- ISO: serialize iso_sock_clear_timer with socket lock
- HIDP: fix missing length checks in hidp_input_report()
- 6lowpan: check skb_clone() return value in send_mcast_pkt()
- btusb: Allow firmware re-download when version matches
- hci_qca: Use 100 ms SSR delay for rampatch and NVM loading
* tag 'for-net-2026-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_sync: Reset device counters in hci_dev_close_sync()
Bluetooth: hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device close
Bluetooth: hci_core: Rework hci_dev_do_reset() to use hci_sync functions
Bluetooth: ISO: serialize iso_sock_clear_timer with socket lock
Bluetooth: ISO: fix UAF in iso_recv_frame
Bluetooth: L2CAP: Fix possible crash on l2cap_ecred_conn_rsp
Bluetooth: l2cap: clear chan->ident on ECRED reconfiguration success
Bluetooth: hci_qca: Use 100 ms SSR delay for rampatch and NVM loading
Bluetooth: hci_sync: fix UAF in hci_le_create_cis_sync
Bluetooth: 6lowpan: check skb_clone() return value in send_mcast_pkt()
Bluetooth: btusb: Allow firmware re-download when version matches
Bluetooth: HIDP: fix missing length checks in hidp_input_report()
Bluetooth: L2CAP: use chan timer to close channels in cleanup_listen()
Bluetooth: L2CAP: fix chan ref leak in l2cap_chan_timeout() on !conn
Bluetooth: hci_conn: Fix memory leak in hci_le_big_terminate()
====================
Link: https://patch.msgid.link/20260528131839.462344-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sctp_wait_for_connect() drops and re-acquires the socket lock while
waiting for the association to reach ESTABLISHED state. During this
window, another thread can peeloff the association to a new socket via
getsockopt(SCTP_SOCKOPT_PEELOFF), changing asoc->base.sk. After
re-acquiring the old socket lock, sctp_wait_for_connect() returns
success without noticing the migration — the caller then accesses
the association under the wrong lock in sctp_datamsg_from_user().
Add the same sk != asoc->base.sk check that sctp_wait_for_sndbuf()
already has, returning an error if the association was migrated while
we slept.
Fixes: 668c9beb90 ("sctp: implement assign_number for sctp_stream_interleave")
Signed-off-by: Zhenghang Xiao <kipreyyy@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20260527032411.60959-1-kipreyyy@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ETHTOOL_MSG_STRSET_GET is the only op which sets allow_nodev_do.
When no device is provided it dumps static tables, there's no
need to hold rtnl_lock for this.
Not taking rtnl_lock is a minor win in itself so I think this
patch stands on its own merits. Later on it will be useful
to do locking only in paths which have access to a netdev,
so that we can decide which locks to take per-netdev.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260527162522.3344231-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 4157501b9a ("vsock/virtio: fix skb overhead
overflow on 32-bit builds"). The fix was semantically correct (although
it would have been better to use mul_u32_u32(), as David pointed out),
but in practice we are estimating the memory used to allocate the SKBs,
and this will never cause a 32-bit variable to overflow on a 32-bit
system, since the memory would have run out long before that. On 64-bit,
SKB_TRUESIZE() already evaluates to size_t, so the multiplication is
already in 64-bit arithmetic without the cast.
Let's revert this to avoid unnecessary 64-bit multiplies on the
per-packet receive path on 32-bit systems.
Reported-by: David Laight <david.laight.linux@gmail.com>
Closes: https://lore.kernel.org/netdev/20260523173557.5cc4f4f6@pumpkin
Suggested-by: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Laight <david.laight.linux@gmail.com>
Link: https://patch.msgid.link/20260527171046.130211-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- netfilter: walk fib6_siblings under RCU
Previous releases - regressions:
- netlink: fix sending unassigned nsid after assigned one
- bridge: fix sleep in atomic context in netlink path
- sched: fix ethx:ingress -> ethy:egress -> ethx:ingress mirred loop
- ipv4: fix net->ipv4.sysctl_local_reserved_ports UaF
- eth: tun: free page on short-frame rejection in tun_xdp_one()
Previous releases - always broken:
- skbuff: fix missing zerocopy reference in pskb_carve helpers
- handshake: drain pending requests at net namespace exit
- ethtool:
- rss: avoid modifying the RSS context response
- module: avoid leaking a netdev ref on module flash errors
- coalesce: cap profile updates at NET_DIM_PARAMS_NUM_PROFILES
- netfilter: fix dst corruption in same register operation
- nfc: hci: fix out-of-bounds read in HCP header parsing
- ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo()
- eth: vti: use ip6_tnl.net in vti6_changelink().
- eth: vxlan: do not reuse cached ip_hdr() value after skb_tunnel_check_pmtu()
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=IBwj
-----END PGP SIGNATURE-----
Merge tag 'net-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"This is again significantly bigger than the same point into the
previous cycle, but at least smaller than last week.
I'm not aware of any pending regression for the current cycle.
Including fixes from netfilter.
Current release - regressions:
- netfilter: walk fib6_siblings under RCU
Previous releases - regressions:
- netlink: fix sending unassigned nsid after assigned one
- bridge: fix sleep in atomic context in netlink path
- sched: fix ethx:ingress -> ethy:egress -> ethx:ingress mirred loop
- ipv4: fix net->ipv4.sysctl_local_reserved_ports UaF
- eth: tun: free page on short-frame rejection in tun_xdp_one()
Previous releases - always broken:
- skbuff: fix missing zerocopy reference in pskb_carve helpers
- handshake: drain pending requests at net namespace exit
- ethtool:
- rss: avoid modifying the RSS context response
- module: avoid leaking a netdev ref on module flash errors
- coalesce: cap profile updates at NET_DIM_PARAMS_NUM_PROFILES
- netfilter: fix dst corruption in same register operation
- nfc: hci: fix out-of-bounds read in HCP header parsing
- ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo()
- eth:
- vti: use ip6_tnl.net in vti6_changelink().
- vxlan: do not reuse cached ip_hdr() value after
skb_tunnel_check_pmtu()"
* tag 'net-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
dpll: zl3073x: make frequency monitor a per-device attribute
dpll: zl3073x: use __dpll_device_change_ntf() and remove change_work
dpll: export __dpll_device_change_ntf() for use under dpll_lock
net/handshake: Drain pending requests at net namespace exit
net/handshake: Verify file-reference balance in submit paths
net/handshake: Close the submit-side sock_hold race
net/handshake: hand off the pinned file reference to accept_doit
net/handshake: Take a long-lived file reference at submit
net/handshake: Pass negative errno through handshake_complete()
nvme-tcp: store negative errno in queue->tls_err
net/handshake: Use spin_lock_bh for hn_lock
net: skbuff: fix missing zerocopy reference in pskb_carve helpers
net: hibmcge: move dma_rmb() after dma_sync_single_for_cpu() in RX path
net: hibmcge: disable Relaxed Ordering to fix RX packet corruption
selftests/tc-testing: Add netem test case exercising loops
selftests/tc-testing: Add mirred test cases exercising loops
net/sched: act_mirred: Fix return code in early mirred redirect error paths
net/sched: act_mirred: Fix blockcast recursion bypass leading to stack overflow
net/sched: Fix ethx:ingress -> ethy:egress -> ethx:ingress mirred loop
net/sched: fix packet loop on netem when duplicate is on
...
Before resetting or closing the device, protocol counters should also be
zeroed.
Fixes: d0b137062b ("Bluetooth: hci_sync: Rework init stages")
Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since hci_dev_close_sync() can now be called during the reset path, we
should also set HCI_CMD_DRAIN_WORKQUEUE. This avoids queuing timeouts
while the hdev workqueue is being drained.
Fixes: 877afadad2 ("Bluetooth: When HCI work queue is drained, only queue chained work")
Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The current HCI reset function in hci_core.c duplicates most of the work
done by hci_dev_close_sync(), and doesn't handle LE, advertising or
discovery.
Instead of porting these to hci_dev_do_reset(), directly call the
close/open functions from hci_sync to reset the hdev. MGMT now notifies
when a user performs a reset.
Suggested-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
iso_sock_close() calls iso_sock_clear_timer() before acquiring
lock_sock(sk).
iso_sock_clear_timer() reads iso_pi(sk)->conn twice without the
socket lock held:
if (!iso_pi(sk)->conn)
return;
cancel_delayed_work(&iso_pi(sk)->conn->timeout_work);
Concurrently, iso_conn_del() executes under lock_sock(sk) and calls
iso_chan_del(), which sets iso_pi(sk)->conn to NULL and may result in
the final reference to the connection being dropped:
CPU0 CPU1
---- ----
iso_sock_clear_timer()
if (conn != NULL) ... lock_sock(sk)
iso_chan_del()
iso_pi(sk)->conn = NULL
cancel_delayed_work(conn) /* NULL deref or UAF */
iso_pi(sk)->conn is not stable across the unlock window, causing a
NULL pointer dereference or use-after-free.
Serialize iso_sock_clear_timer() with the socket lock by moving it
inside lock_sock()/release_sock(), matching the pattern used in
iso_conn_del() and all other call sites.
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
iso_recv_frame reads conn->sk under iso_conn_lock but releases the lock
before using sk, with no reference held. A concurrent iso_sock_kill()
can free sk in that window, causing use-after-free on sk->sk_state and
sock_queue_rcv_skb().
Fix by replacing the bare pointer read with iso_sock_hold(conn), which
calls sock_hold() while the spinlock is held, atomically elevating the
refcount before the lock drops. Add a drop_put label so sock_put() is
called on all exit paths where the hold succeeded.
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If dcid is received for an already-assigned destination CID the spec
requires that both channels to be discarded, but calling l2cap_chan_del
may invalidate the tmp cursor created by list_for_each_entry_safe and
in fact it is the wrong procedure as the chan->dcid may be assigned
previously it really needs to be disconnected.
Calling l2cap_chan_clone directly may still lead to l2cap_chan_del so
instead schedule l2cap_chan_timeout with delay 0 to close the channel
asynchronously.
Fixes: 15f02b9105 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_ecred_reconf_rsp() returns early on success without clearing
chan->ident. Every other L2CAP response handler (l2cap_ecred_conn_rsp,
l2cap_le_connect_rsp, l2cap_config_rsp) clears chan->ident after a
successful transaction to prevent the channel from matching subsequent
responses with the recycled ident value.
A remote attacker that completed a reconfiguration as the peer can
replay a failure response with the stale ident, causing the kernel to
match and destroy the already-established channel via
l2cap_chan_del(chan, ECONNRESET).
Clear chan->ident for all matching channels on success, and harden the
failure path by using l2cap_chan_hold_unless_zero() consistent with
other L2CAP handlers (l2cap_le_command_rej, __l2cap_get_chan_by_ident).
Fixes: 15f02b9105 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Zhenghang Xiao <kipreyyy@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The arguments to list_splice_init() in handshake_net_exit() are
reversed. The call moves the local empty "requests" list onto
hn->hn_requests, leaving the local list empty, so the subsequent
drain loop runs zero iterations. Pending handshake requests that
had not yet been accepted are not torn down when the net namespace
is destroyed; each one keeps a reference on a socket file and on
the handshake_req allocation.
Pass the source and destination in the documented order
(list_splice_init(list, head) moves list onto head) so the pending
list is transferred to the local scratch list and drained through
handshake_complete().
Fixing the splice direction exposes a list-corruption race. After
the splice each req->hr_list still has non-empty link pointers,
threading the stack-local scratch list rather than hn_requests.
A concurrent handshake_req_cancel() -- for example, from sunrpc's
TLS timeout on a kernel socket whose netns reference was not
taken -- finds the request through the rhashtable, calls
remove_pending(), and sees !list_empty(&req->hr_list).
__remove_pending_locked() then list_del_init()s an entry off the
scratch list while the drain iterates, corrupting it. The same
call arriving after the drain loop has run list_del() on an
entry hits LIST_POISON instead.
Have remove_pending() check HANDSHAKE_F_NET_DRAINING under
hn_lock and report not-found when drain is in progress. The
drain has already taken ownership; handshake_complete()'s existing
test_and_set on HANDSHAKE_F_REQ_COMPLETED still arbitrates
between drain and cancel for who calls the consumer's hp_done. Use
list_del_init() rather than list_del() in the drain so req->hr_list
does not carry LIST_POISON after drain releases the entry.
The DRAINING guard in remove_pending() makes cancel return false,
but cancel still falls through to test_and_set_bit on
HANDSHAKE_F_REQ_COMPLETED and drops the request's hr_file reference.
Without another pin, if that is the last reference, sk_destruct frees
the request while it is still linked on the drain loop's local list.
Pin each request's hr_file under hn_lock before releasing the list,
and drop that drain pin after the loop finishes with the request.
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-8-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The new file-reference contract on struct handshake_req is silently
breakable: a missing get_file() at submit or a missing fput() on an
error path leaves the file leaked but does not crash the test, so
the existing absence-of-crash checks pass either way.
Snapshot file_count(filp) before each handshake_req_submit() in
the submit-success, EAGAIN, EBUSY, and cancel tests, and assert
the expected balance after submit and again after cancel. The
already-completed cancel test also asserts the post-complete
balance, which pins down that handshake_complete() drops the
reference and that the subsequent cancel does not double-fput.
The destroy test gets the same treatment before __fput_sync(),
which double-checks that cancel's fput() ran and the only
remaining reference is the one sock_alloc_file() established.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-7-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
handshake_req_submit() publishes the request via
handshake_req_hash_add() and __add_pending_locked(), drops
hn_lock, and calls handshake_genl_notify() (which can sleep)
before taking sock_hold() on req->hr_sk. A fast tlshd ACCEPT
followed by DONE can drive handshake_complete()'s sock_put()
into the window between the spin_unlock and the late
sock_hold(); on a system where the consumer's fd held the
only sk reference, the late sock_hold() then operates on an
sk whose refcount has reached zero.
The preceding two patches install an explicit file reference
on struct handshake_req. That file pins sock->file, which
pins the embedded struct socket, which defers inet_release()'s
sock_put(). As long as hr_file is held, sk cannot reach refcount
zero from the consumer side, and the submit-side sock_hold()
with its matching sock_put() calls in handshake_complete() and
handshake_req_cancel() is now redundant.
Drop all three. The file reference already keeps each request's
socket alive, and the lifetime story is contained in a single
get_file()/fput() pair.
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-6-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
handshake_req_next() removes the request from the per-net
pending list and drops hn_lock before handshake_nl_accept_doit()
reads req->hr_sk->sk_socket and dereferences sock->file (once in
FD_PREPARE() and again in get_file()). In that window a
consumer running tls_handshake_cancel() followed by sockfd_put()
(svc_sock_free) or __fput_sync() (xs_reset_transport) releases
sock->file. sock_release() then runs sock_orphan(), zeroing
sk_socket, and frees the struct socket. The accept-side code
either reads NULL through sk_socket or chases freed memory.
The submit-side sock_hold() does not prevent this. sk_refcnt
protects struct sock, but struct socket and sock->file are
independently refcounted via the file descriptor the consumer
owns. Pinning sk leaves sock and sock->file unprotected.
Retarget the accept-side dereferences at req->hr_file, which was
pinned at submit time, instead of req->hr_sk->sk_socket->file.
Pinning on its own is not sufficient: a consumer that cancels
between handshake_req_next() returning and accept_doit reaching
FD_PREPARE() takes the !remove_pending() branch in
handshake_req_cancel() and drops hr_file before the accept side
takes its own reference. Hand off an additional file reference
inside handshake_req_next(), under hn_lock, so the accept side
operates on a reference that no concurrent handshake_req_cancel()
can revoke. FD_PREPARE() consumes that handed-off reference,
either by transferring it to the new fd in fd_publish() or by
dropping it in the cleanup destructor on error; the explicit
get_file() that previously balanced FD_PREPARE() is therefore
redundant and goes away.
Update handshake_req_cancel_test2 and _test3 to simulate the
FD_PREPARE() consumption with an fput() so the kunit file-count
assertions stay balanced.
Reported-by: Chris Mason <clm@meta.com>
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-5-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
handshake_nl_accept_doit() needs the file pointer backing
req->hr_sk->sk_socket to survive the window between
handshake_req_next() and the subsequent FD_PREPARE() and get_file().
The submit-side sock_hold() does not provide that. sk_refcnt keeps
struct sock alive, but struct socket is owned by sock->file: when
the consumer fputs the last file reference, sock_release() tears
the socket down regardless of any sock_hold.
Add an hr_file pointer to struct handshake_req and acquire an
explicit reference on sock->file during handshake_req_submit().
handshake_complete() and handshake_req_cancel() release the
reference on the completion-bit-winning path.
The submit error path must also release the file reference, but
after rhashtable insertion a concurrent handshake_req_cancel() can
discover the request and race the error path. Gate the error-path
cleanup -- sk_destruct restoration, fput, and request destruction
-- with test_and_set_bit(HANDSHAKE_F_REQ_COMPLETED), the same
serialization handshake_complete() and handshake_req_cancel()
already use. When cancel has already claimed ownership, the submit
error path returns without touching the request; socket teardown
handles final destruction.
The accept-side dereferences are not yet retargeted; that change
comes in the next patch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-4-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
handshake_complete() declares status as unsigned int and
tls_handshake_done() negates that value (-status) before handing
it to the TLS consumer. Consumers match on negative errno
constants -- xs_tls_handshake_done() has
switch (status) {
case 0:
case -EACCES:
case -ETIMEDOUT:
lower_transport->xprt_err = status;
break;
default:
lower_transport->xprt_err = -EACCES;
}
so the API as designed expects callers to pass positive errno
values that the tlshd shim then negates.
Three internal callers in handshake_nl_accept_doit(), the
net-exit drain, and a kunit test follow kernel convention and
pass negative errnos -- -EIO, -ETIMEDOUT, -ETIMEDOUT. The
implicit conversion to unsigned int turns -ETIMEDOUT into
0xFFFFFF92; the subsequent -status in tls_handshake_done()
wraps back to 110, the consumer's switch falls through, and
the xprt reports -EACCES on what should be -ETIMEDOUT or -EIO.
Fix the API rather than the call sites. The natural kernel
convention is negative errno in, negative errno out. Change
handshake_complete() and hp_done to take int status, drop the
negation in tls_handshake_done(), and negate once in
handshake_nl_done_doit() where status arrives from the wire
as an unsigned netlink attribute. The three internal callers
were already correct under that convention and need no change.
At the same wire boundary, declare MAX_ERRNO as the netlink
policy upper bound for HANDSHAKE_A_DONE_STATUS. Attribute
validation rejects out-of-range values before
handshake_nl_done_doit() runs, and negating a bounded u32 there
stays within int range -- closing the UBSAN-visible signed-
integer overflow that an unconstrained u32 would invoke.
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-3-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
nvmet_tcp_state_change(), a socket callback that runs in BH context,
can reach handshake_req_cancel() via nvmet_tcp_schedule_release_queue()
and tls_handshake_cancel(). handshake_req_cancel() acquires
hn->hn_lock with plain spin_lock(). If a process-context thread on
the same CPU holds hn->hn_lock when a softirq invokes the cancel path,
the lock attempt deadlocks. This is the only caller that invokes
tls_handshake_cancel() from BH context; every other consumer calls it
from process context.
Deferring the cancel to process context in the NVMe target is not
straightforward: nvmet_tcp_schedule_release_queue() must call
tls_handshake_cancel() atomically with its state transition to
DISCONNECTING. If the cancel were deferred, the handshake completion
callback could fire in the window before the cancel runs, observe the
unexpected state, and return without dropping its kref on the queue.
Reworking that interlock is considerably more invasive than hardening
the handshake lock. Convert all hn->hn_lock acquisitions from
spin_lock/spin_unlock to spin_lock_bh/spin_unlock_bh so the lock is
never taken with softirqs enabled.
Fixes: 675b453e02 ("nvmet-tcp: enable TLS handshake upcall")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-1-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
pskb_carve_inside_header() and pskb_carve_inside_nonlinear() both copy
the old skb_shared_info header into a new buffer via memcpy(), which
includes the destructor_arg pointer (uarg) for MSG_ZEROCOPY skbs.
Neither function calls net_zcopy_get() for the new shinfo, creating an
unaccounted holder: every skb_shared_info with destructor_arg set will
call skb_zcopy_clear() once when freed, but the corresponding
net_zcopy_get() was never called for the new copy. Repeated calls
drive uarg->refcnt to zero prematurely, freeing ubuf_info_msgzc while
TX skbs still hold live destructor_arg pointers.
KASAN reports use-after-free on a freed ubuf_info_msgzc:
BUG: KASAN: slab-use-after-free in skb_release_data+0x77b/0x810
Read of size 8 at addr ffff88801574d3e8 by task poc/220
Call Trace:
skb_release_data+0x77b/0x810
kfree_skb_list_reason+0x13e/0x610
skb_release_data+0x4cd/0x810
sk_skb_reason_drop+0xf3/0x340
skb_queue_purge_reason+0x282/0x440
rds_tcp_inc_free+0x1e/0x30
rds_recvmsg+0x354/0x1780
__sys_recvmsg+0xdf/0x180
Allocated by task 219:
msg_zerocopy_realloc+0x157/0x7b0
tcp_sendmsg_locked+0x2892/0x3ba0
Freed by task 219:
ip_recv_error+0x74a/0xb10
tcp_recvmsg+0x475/0x530
The skb consuming the late access still referenced the same uarg via
shinfo->destructor_arg copied by pskb_carve_inside_nonlinear() without
a refcount bump. This has been verified to be reliably exploitable: a
working proof-of-concept achieves full root privilege escalation from
an unprivileged local user on a default kernel configuration.
The fix follows the pattern of pskb_expand_head() which has the same
memcpy/cloned structure. For pskb_carve_inside_header(), net_zcopy_get()
is placed after skb_orphan_frags() succeeds, so the orphan error path
needs no cleanup. For pskb_carve_inside_nonlinear(), net_zcopy_get() is
placed after all failure points and just before skb_release_data(), so
no error path needs cleanup at all -- matching pskb_expand_head() more
closely and avoiding the need for a balancing net_zcopy_put().
Fixes: 6fa01ccd88 ("skbuff: Add pskb_extract() helper function")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Minh Nguyen <minhnguyen.080505@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260526041240.329462-1-minhnguyen.080505@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since retval is set as TC_ACT_STOLEN in the mirred redirect case, returning
retval in cases where redirect failed will make the callers not register
the skb as being dropped.
Fix this by returning TC_ACT_SHOT instead in such scenarios.
Fixes: 16085e48cb ("net/sched: act_mirred: Create function tcf_mirred_to_dev and improve readability")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260413082027.2244884-1-hxzene%40gmail.com
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260525122556.973584-8-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
tcf_mirred_act() checks sched_mirred_nest against MIRRED_NEST_LIMIT (4)
to prevent deep recursion. However, when the action uses blockcast
(tcfm_blockid != 0), the function returns at the tcf_blockcast() call
BEFORE reaching the counter increment. As a result, the recursion
counter never advances and the limit check is entirely bypassed.
When two devices share a TC egress block with a mirred blockcast rule,
a packet egressing on device A is mirrored to device B via blockcast;
device B's egress TC re-enters tcf_mirred_act() via blockcast and
mirrors back to A, creating an unbounded recursion loop:
tcf_mirred_act -> tcf_blockcast -> tcf_mirred_to_dev -> dev_queue_xmit
-> sch_handle_egress -> tcf_classify -> tcf_mirred_act -> (repeat)
This recursion continues until the kernel stack overflows.
The bug is reachable from an unprivileged user via
unshare(CLONE_NEWUSER | CLONE_NEWNET): user namespaces grant
CAP_NET_ADMIN in the new network namespace, which is sufficient to
create dummy devices, attach clsact qdiscs with shared blocks, and
install mirred blockcast filters.
BUG: TASK stack guard page was hit at ffffc90000b7fff8
Oops: stack guard page: 0000 [#1] SMP KASAN NOPTI
CPU: 2 UID: 1000 PID: 169 Comm: poc Not tainted 7.0.0-rc7-next-20260410
RIP: 0010:xas_find+0x17/0x480
Call Trace:
xa_find+0x17b/0x1d0
tcf_mirred_act+0x640/0x1060
tcf_action_exec+0x400/0x530
basic_classify+0x128/0x1d0
tcf_classify+0xd83/0x1150
tc_run+0x328/0x620
__dev_queue_xmit+0x797/0x3100
tcf_mirred_to_dev+0x7b1/0xf70
tcf_mirred_act+0x68a/0x1060
[repeating ~30+ times until stack overflow]
Kernel panic - not syncing: Fatal exception in interrupt
Fix this by incrementing sched_mirred_nest before calling
tcf_blockcast() and decrementing it on return, mirroring the
non-blockcast path. This ensures subsequent recursive entries see the
updated counter and are correctly limited by MIRRED_NEST_LIMIT.
Fixes: fe946a751d ("net/sched: act_mirred: add loop detection")
Signed-off-by: Kito Xu (veritas501) <hxzene@gmail.com>
Link: https://patch.msgid.link/20260525122556.973584-7-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When mirred redirects to ingress (from either ingress or egress) the loop
state from sched_mirred_dev array dev is lost because of 1) the packet
deferral into the backlog and 2) the fact the sched_mirred_dev array is
cleared. In such cases, if there was a loop we won't discover it.
Here's a simple test to reproduce:
ip a add dev port0 10.10.10.11/24
tc qdisc add dev port0 clsact
tc filter add dev port0 egress protocol ip \
prio 10 matchall action mirred ingress redirect dev port1
tc qdisc add dev port1 clsact
tc filter add dev port1 ingress protocol ip \
prio 10 matchall action mirred egress redirect dev port0
ping -c 1 -W0.01 10.10.10.10
Fixes: fe946a751d ("net/sched: act_mirred: add loop detection")
Tested-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260525122556.973584-6-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When netem duplicates a packet it re-enqueues the copy at the root qdisc.
If another netem sits in the tree the copy can be duplicated
again, recursing until the stack or memory is exhausted.
The original duplication guard temporarily zeroed q->duplicate around
the re-enqueue, but that does not cover all cases because it is
per-qdisc state shared across all concurrent enqueue paths
and is not safe without additional locking.
Use the skb tc_depth field introduced in an earlier patch:
- increment it on the duplicate before re-enqueue
- skip duplication for any skb whose tc_depth is already non-zero.
This marks the packet itself rather than mutating qdisc state,
therefore it is safe regardless of tree topology or concurrency.
Fixes: 0afb51e728 ("[PKT_SCHED]: netem: reinsert for duplication")
Reported-by: William Liu <will@willsroot.io>
Reported-by: Savino Dicanosa <savy@syst3mfailure.io>
Closes: https://lore.kernel.org/netdev/8DuRWwfqjoRDLDmBMlIfbrsZg9Gx50DHJc1ilxsEBNe2D6NMoigR_eIRIG0LOjMc3r10nUUZtArXx4oZBIdUfZQrwjcQhdinnMis_0G7VEk=@willsroot.io/
Co-developed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: William Liu <will@willsroot.io>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260525122556.973584-5-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This reverts commit ec8e0e3d7a.
The original patch rejects any tree containing two netems when
either has duplication set, even when they sit on unrelated classes
of the same classful parent. That broke configurations that have
worked since netem was introduced.
The re-entrancy problem the original commit was trying to solve is
handled by later patch using tc_depth flag.
Doing this revert will (re)expose the original bug with multiple
netem duplication. When this patch is backported make sure
and get the full series.
Fixes: ec8e0e3d7a ("net/sched: Restrict conditions for adding duplicating netems to qdisc tree")
Reported-by: Ji-Soo Chung <jschung2@proton.me>
Reported-by: Gerlinde <lrGerlinde@mailfence.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220774
Reported-by: zyc zyc <zyc199902@zohomail.cn>
Closes: https://lore.kernel.org/all/19adda5a1e2.12410b78222774.9191120410578703463@zohomail.cn/
Reported-by: Manas Ghandat <ghandatmanas@gmail.com>
Closes: https://lore.kernel.org/netdev/f69b2c8f-8325-4c2e-a011-6dbc089f30e4@gmail.com/
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260525122556.973584-3-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When we try to assign a chanctx to a link, if
ieee80211_find_or_create_chanctx() failed, we try to evacuate a NAN
channel and call it again.
This logic is broken:
In case there are not enough chanctxs we will fail earlier,
when we check ieee80211_check_combinations().
To fix this, do the following in case ieee80211_check_combinations()
failed:
- check if there is a NAN channel that can be evacuated
- make ieee80211_check_combinations() not consider the chanctx of that NAN
channel, so we pretend that it was already evacuated
- If now ieee80211_check_combinations() is successful, we know that it
helped, and we can remove that NAN channel for real.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260527224745.5f7b10505145.I1712bc64f9eec9c99f05994208ad124624a29f1c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Sometimes, ieee80211_check_combinations fails, but it is hard to know
why exactly. We will have to return an array of reasons, one per
combination.
In cases where we want to check if it failed because there are not
enough chanctxs (and maybe remove one if needed), we can just not fill
in that chanctx(s) in iface_combination_params::num_different_channels
in ieee80211_fill_ifcomb_params, so that chanctx(s) won't be taken into
account.
To allow that, add an option to pass a callback to
ieee80211_fill_ifcomb_params. This callback will be called for each
chanctx we consider to count in num_different_channels and will return
whether or not this chanctx should be skipped and not counted.
This mechanism will be used later.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260527224745.0042232f996e.I5d323125e34f3b253510e85ceb7a770d59f689fb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit 79240f3f6d ("wifi: nl80211: re-check wiphy netns in
nl80211_prepare_wdev_dump() continuation") fixed one dumpit path that
looked the wiphy up by index on a later call without confirming it was
still in the caller's netns. Two more dumpit paths have the same gap.
nl80211_testmode_dump() and nl80211_prepare_vendor_dump() both keep the
wiphy index in cb->args[] and look it up again on later calls, through
cfg80211_rdev_by_wiphy_idx() and wiphy_idx_to_wiphy(). The first call
binds to the caller's netns. A later call does not check it again. In
between, the wiphy can move to another netns via
NL80211_CMD_SET_WIPHY_NETNS.
Add the same net_eq() check to both. On a mismatch, return -ENODEV and
the dump ends.
No mainline driver registers .testmode_dump or
wiphy_vendor_command.dumpit, so these paths are not reachable today.
Drivers outside the tree can register either.
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Link: https://patch.msgid.link/20260527133358.2853238-1-maoyixie.tju@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add KUnit coverage for ieee80211_parse_neg_ttlm() to lock the sparse
link_map_presence layout against future regressions.
The sparse_presence_no_oob_read case crafts a negotiated TTLM element
with link_map_presence = BIT(0) | BIT(7) and bm_size = 2 in a buffer
sized exactly to the validated element length. Without the parser
fix this would read 14 bytes past the buffer when processing TID 7;
under KASAN that is a slab-out-of-bounds report.
The dense_presence_baseline case crafts a fully populated
link_map_presence = 0xff element to confirm that the cursor-advance
fix does not regress the path that was already correct.
Export ieee80211_parse_neg_ttlm via VISIBLE_IF_MAC80211_KUNIT so the
test can call it directly.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260515151719.1317659-3-michael.bommarito@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ipv6_rpl_srh_decompress() computes:
outhdr->hdrlen = (((n + 1) * sizeof(struct in6_addr)) >> 3);
hdrlen is __u8. For n >= 127 the result exceeds 255 and silently
truncates. With n=127 (cmpri=15, cmpre=15, pad=0, hdrlen=16):
(128 * 16) >> 3 = 256, truncated to 0 as __u8
The caller in ipv6_rpl_srh_rcv() then places the compressed header
at buf + ((ohdr->hdrlen + 1) << 3). With hdrlen=0 this is buf + 8,
but the decompressed region occupies buf[0..2055] (8-byte header
plus 128 full addresses). The compressed header overlaps the
decompressed data, and ipv6_rpl_srh_compress() writes into this
overlap, corrupting the routing header of the forwarded packet.
The existing guard at exthdrs.c:546 checks (n + 1) > 255, which
prevents n+1 from overflowing unsigned char (the segments_left
field), but does not prevent the computed hdrlen from overflowing
__u8. n=127 passes because 128 <= 255, yet hdrlen=256 does not
fit.
Tighten the bound to (n + 1) > 127. This caps n at 126, giving
hdrlen = (127 * 16) >> 3 = 254, which fits in __u8. The compressed
header then lands at buf + ((254 + 1) << 3) = buf + 2040, exactly
past the decompressed region (buf[0..2039]). No overlap. 127
segments is well beyond any realistic RPL deployment.
Fixes: 8610c7c6e3 ("net: ipv6: add support for rpl sr exthdr")
Signed-off-by: Rahul Chandelkar <rc@rexion.ai>
Link: https://patch.msgid.link/20260525154031.2290876-1-rc@rexion.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When inserting an EDT packet with time before flow->time_next_packet,
update the flow and possibly queue next delivery time.
Reinsert the flow into the q->delayed rb-tree to position correctly
and to have fq_check_throttled set wake-up at the right next time.
Factor RB tree insertion out fq_flow_set_throttled to avoid open
coding twice.
EDT packets do not take precedence over queue rate limit. Skip this
new step if a queue limit is set. EDT packets do take precedence over
per-socket rate limits, as can be seen from fq_dequeue reading
sk_pacing_rate if !skb->tstamp.
With this change the so_txtime selftest sends packets in the expected
order.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260526134109.2624493-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Quan Sun reported [1] a stack overflow in cls_bpf_offload_cmd().
Reproducer on netdevsim: add a skip_sw cls_bpf filter, set the
bpf_tc_accept debugfs knob to 0, then `tc filter replace`. The replace
calls tc_setup_cb_replace() which fails. cls_bpf_offload_cmd() then
swaps prog/oldprog and recursively calls itself to roll back. But
bpf_tc_accept=0 makes the rollback fail too, which triggers yet another
rollback frame with the same arguments, and so on until the stack is
exhausted.
bpf_tc_accept is just a convenient knob for the reproducer. Any driver
whose tc_setup_cb_replace() fails twice in a row can hit the same loop,
so this is not a netdevsim-only issue.
Two ways to fix it:
1) Have the rollback call tc_setup_cb_add() on oldprog instead of
re-entering cls_bpf_offload_cmd().
2) Mark the rollback frame with a flag and skip a second-level
rollback from inside it.
Go with (2). It is the smaller change and keeps the original behaviour:
the rollback still goes through tc_setup_cb_replace(), so the driver
gets one real chance to restore its state. If that attempt also fails,
we just return the original error instead of recursing.
[1]: https://lore.kernel.org/bpf/ce5a6005-3c5e-4696-9e05-eba9461dc860@std.uestc.edu.cn/T/#u
Fixes: 102740bd94 ("cls_bpf: fix offload assumptions after callback conversion")
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://patch.msgid.link/20260526025529.24382-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Netlink fallback path for reading module EEPROM
(fallback_set_params()) validates that offset < eeprom_len,
but does not check that offset + length stays within eeprom_len.
The ioctl equivalent (ethtool_get_any_eeprom() in ioctl.c) has
always enforced both bounds:
if (eeprom.offset + eeprom.len > total_len)
return -EINVAL;
This could lead to surprises in both drivers and device FW.
Add the missing offset + length validation to fallback_set_params(),
mirroring the ioctl.
Similarly - ethtool core in general, and ethtool_get_any_eeprom()
in particular tries to zero-init all buffers passed to the drivers
to avoid any extra work of zeroing things out. eeprom_fallback()
uses a plain kmalloc(), change it to zalloc.
Fixes: 96d971e307 ("ethtool: Add fallback to get_module_eeprom from netlink command")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All ethtool driver op calls should be sandwiched between
ethnl_ops_begin() / ethnl_ops_complete(). In Netlink eeprom code,
if the paged access failed we fall back to old API, but we
first call _complete() and the fallback never does its own
ethnl_ops_begin(). Move the fallback into the _begin() / _complete()
section.
Fixes: 96d971e307 ("ethtool: Add fallback to get_module_eeprom from netlink command")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
strset_prepare_data() passes ETHTOOL_A_HEADER_FLAGS (3) as the header
attribute to ethnl_req_get_phydev(). This is incorrect, in the main
attr space 3 is ETHTOOL_A_STRSET_COUNTS_ONLY, not the request
header attr. The correct constant is ETHTOOL_A_STRSET_HEADER (1).
ethnl_req_get_phydev() only uses this value for the extack,
so this is not a "functionally visible"(?) bug.
Fixes: e96c93aa4b ("net: ethtool: strset: Allow querying phy stats by index")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The goto err label leads to:
genlmsg_cancel(skb, ehdr);
return ret;
If ethnl_tsinfo_prepare_dump() failed, it has not started a genlmsg.
There's nothing to cancel, and passing an error pointer to
genlmsg_cancel() would cause a crash.
Fixes: b9e3f7dc9e ("net: ethtool: tsinfo: Enhance tsinfo to support several hwtstamp by net topology")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tsinfo_prepare_data() has two code paths: a "by-PHC" path for
user-specified hardware timestamping providers, and the old path.
Commit 89e281ebff ("ethtool: init tsinfo stats if requested") added
ethtool_stats_init() to mark stat slots as ETHTOOL_STAT_NOT_SET before
the driver callback populates them, but placed the call inside the
old-path block.
When commit b9e3f7dc9e ("net: ethtool: tsinfo: Enhance tsinfo to
support several hwtstamp by net topology") added the by-PHC early
return, it landed above the stats initialization. On that path
the stats array retains the zero-fill from ethnl_init_reply_data()'s
zalloc. This leads to the reply including a stats nest with four
zero-valued attributes that should have been absent.
Reject GET requests for stats with HWTSTAMP_PROVIDER or dump.
Fixes: b9e3f7dc9e ("net: ethtool: tsinfo: Enhance tsinfo to support several hwtstamp by net topology")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tsconfig_prepare_data() calls ethnl_ops_begin(), we need to call
ethnl_ops_complete() before returning the error.
Fixes: 6e9e2eed4f ("net: ethtool: Add support for tsconfig command to get/set hwtstamp config")
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pse_prepare_data() is missing ethnl_ops_complete() if
ethnl_req_get_phydev() returned an error. Move getting
phydev up so that we don't have to worry about this
(similar order to linkstate_prepare_data()).
Note that phydev may still be NULL (this is checked in
pse_get_pse_attributes()), the goal isn't really to avoid
the _begin() / _complete() calls, only to simplify the error
handling.
While at it propagate the original error. Why this code
overrides the error with -ENODEV but !phydev generates
-EOPNOTSUPP is unclear to me...
Fixes: 31748765be ("net: ethtool: pse-pd: Target the command to the requested PHY")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
linkstate_prepare_data() calls ethnl_req_get_phydev() before
ethnl_ops_begin(), but routes its error path through "goto out"
which calls ethnl_ops_complete().
Fixes: fe55b1d401 ("ethtool: linkstate: migrate linkstate functions to support multi-PHY setups")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A couple of trivial bugs in error handling in tsconfig_send_reply().
If we failed to allocate rskb we need to set the error.
If we did allocate it but failed to send it - we need to remember
to free it.
Fixes: 6e9e2eed4f ("net: ethtool: Add support for tsconfig command to get/set hwtstamp config")
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethnl_update_profile() walks the ETHTOOL_A_PROFILE_IRQ_MODERATION
nest list with an index 'i' and writes new_profile[i++] without
bounding i. The destination is kmemdup()'d at NET_DIM_PARAMS_NUM_PROFILES
entries (5), but the Netlink nest count is entirely user-controlled.
Netlink policies do not have support for constraining the number
of nested entries (or number of multi-attr entries).
Fixes: f750dfe825 ("ethtool: provide customized dim profile management")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nla_nest_start() can return NULL if the skb runs out of space.
Jakub:
There is no bug here, if nla_nest_start() failed there's not space
left in the message. Next nla_put_uint() will also fail and we will
exit via nla_nest_cancel() which handles NULL just fine.
Various people keep sending us this patch so let's commit this.
Signed-off-by: Zhao Dongdong <zhaodongdong@kylinos.cn>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/tencent_A82EBAB365A8B888B66FDCF115A3DCB8880A@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commits e1ae5c2ea4 ("vrf: Increment Icmp6InMsgs on the original
netdev") and bdb7cc643f ("ipv6: Count interface receive statistics
on the ingress netdev") net/ipv6/reassembly.c uses three different
ways to reach idev in various __IP6_INC_STATS() calls.
- ip6_dst_idev(skb_dst(skb))
- __in6_dev_get_safely(skb->dev)
- __in6_dev_stats_get(skb->dev)
Lets centralize this from ipv6_frag_rcv() and use __in6_dev_stats_get().
Note that ipv6_frag_rcv() tests if skb->dev could be NULL already, so
I chose to also guard against NULL, but we probably can remove the
tests in a followup patch, because I do not think skb->dev could be NULL.
iif = skb->dev ? skb->dev->ifindex : 0;
idev can be NULL, __IP6_INC_STATS() deals with this possibility.
Small code size reduction as a bonus.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-145 (-145)
Function old new delta
ipv6_frag_rcv 2399 2362 -37
ip6_frag_reasm 705 597 -108
Total: Before=31455552, After=31455407, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260526145529.3587126-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the start of the git history, brport_store() always acquired the
bridge lock. Back then this decision made sense: The bridge lock
protects the STP state of the bridge and its ports and at that time the
function was only used by two STP related attributes (cost and
priority).
Nowadays, brport_store() processes a lot more attributes and most of
them do not need the bridge lock:
* Bridge flags: Only require RTNL. Read locklessly by the data path.
Annotations can be added in net-next.
* FDB port flushing: Only requires the FDB lock.
* Multicast attributes: Only require the multicast lock.
* Group forward mask: Only requires RTNL. Read locklessly by the data
path. Annotations can be added in net-next.
* Backup port: Only requires RTNL. Read locklessly by the data path.
This is a problem as the bridge calls dev_set_promiscuity() when certain
bridge port flags change and this function can sleep since the commit
cited below, resulting in a splat such as [1].
Fix this by reducing the scope of the bridge lock and only take it when
processing the two STP related attributes that require it. Remove the
now stale comment from br_switchdev_set_port_flag(). The
SWITCHDEV_F_DEFER flag can be removed in net-next.
[1]
BUG: sleeping function called from invalid context at net/core/dev_addr_lists.c:1262
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 372, name: bash
preempt_count: 201, expected: 0
RCU nest depth: 0, expected: 0
5 locks held by bash/372:
#0: ffff88810c51c3f0 (sb_writers#7){.+.+}-{0:0}, at: ksys_write (fs/read_write.c:740)
#1: ffff888115ce9480 (&of->mutex){+.+.}-{4:4}, at: kernfs_fop_write_iter (fs/kernfs/file.c:343)
#2: ffff88810b9fd330 (kn->active#37){.+.+}-{0:0}, at: kernfs_fop_write_iter (fs/kernfs/file.c:80 fs/kernfs/file.c:344)
#3: ffffffffa59473a0 (rtnl_mutex){+.+.}-{4:4}, at: brport_store (net/bridge/br_sysfs_if.c:326)
#4: ffff8881099d2d58 (&br->lock){+...}-{3:3}, at: brport_store (./include/linux/spinlock.h:348 net/bridge/br_sysfs_if.c:345)
Preemption disabled at:
0x0
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
__might_resched.cold (kernel/sched/core.c:9163)
netif_rx_mode_run (net/core/dev_addr_lists.c:1262)
netif_rx_mode_sync (net/core/dev_addr_lists.c:1428)
dev_set_promiscuity (net/core/dev_api.c:289)
br_manage_promisc (net/bridge/br_if.c:135 net/bridge/br_if.c:172)
br_port_flags_change (net/bridge/br_if.c:242 net/bridge/br_if.c:747)
store_learning (net/bridge/br_sysfs_if.c:79 net/bridge/br_sysfs_if.c:235)
brport_store (net/bridge/br_sysfs_if.c:346)
kernfs_fop_write_iter (fs/kernfs/file.c:352)
new_sync_write (fs/read_write.c:595)
vfs_write (fs/read_write.c:688)
ksys_write (fs/read_write.c:740)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Fixes: 78cd408356 ("net: add missing instance lock to dev_set_promiscuity")
Reviewed-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260526064818.272516-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the introduction of the netlink configuration path for bridge
ports in commit 25c71c75ac ("bridge: bridge port parameters over
netlink"), br_setport() was always called with the bridge lock held
around it. Back then this decision made sense: The bridge lock protects
the STP state of the bridge and its ports and at that time the function
only processed three STP related netlink attributes (cost, priority and
state).
Nowadays, br_setport() processes a lot more attributes and most of them
do not need the bridge lock:
* Bridge flags: Only require RTNL. Read locklessly by the data path.
Annotations can be added in net-next.
* FDB port flushing: Only requires the FDB lock.
* Multicast attributes: Only require the multicast lock.
* Group forward mask: Only requires RTNL. Read locklessly by the data
path. Annotations can be added in net-next.
* Backup port and NHID: Only require RTNL. Read locklessly by the data
path.
This is a problem as the bridge calls dev_set_promiscuity() when certain
bridge port flags change and this function can sleep since the commit
cited below, resulting in a splat such as [1].
Fix this by reducing the scope of the bridge lock and only take it when
processing the three STP related attributes that require it. This is
consistent with the multicast attributes where each attribute acquires
the multicast lock instead of having one critical section for all
relevant attributes.
[1]
BUG: sleeping function called from invalid context at net/core/dev_addr_lists.c:1262
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 356, name: bridge
preempt_count: 201, expected: 0
RCU nest depth: 0, expected: 0
2 locks held by bridge/356:
#0: ffffffff919473a0 (rtnl_mutex){+.+.}-{4:4}, at: rtnetlink_rcv_msg (net/core/rtnetlink.c:80 net/core/rtnetlink.c:7002)
#1: ffff888115072d58 (&br->lock){+...}-{3:3}, at: br_setlink (./include/linux/spinlock.h:348 net/bridge/br_netlink.c:1117)
Preemption disabled at:
0x0
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
__might_resched.cold (kernel/sched/core.c:9163)
netif_rx_mode_run (net/core/dev_addr_lists.c:1262)
netif_rx_mode_sync (net/core/dev_addr_lists.c:1428)
dev_set_promiscuity (net/core/dev_api.c:289)
br_manage_promisc (net/bridge/br_if.c:135 net/bridge/br_if.c:172)
br_port_flags_change (net/bridge/br_if.c:242 net/bridge/br_if.c:747)
br_setport (net/bridge/br_netlink.c:1000)
br_setlink (net/bridge/br_netlink.c:1118)
rtnl_bridge_setlink (net/core/rtnetlink.c:5572)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7005)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
netlink_unicast (net/netlink/af_netlink.c:1318 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sock_sendmsg (net/socket.c:787 (discriminator 4) net/socket.c:802 (discriminator 4))
____sys_sendmsg (net/socket.c:2698)
___sys_sendmsg (net/socket.c:2752)
__sys_sendmsg (net/socket.c:2784)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Fixes: 78cd408356 ("net: add missing instance lock to dev_set_promiscuity")
Reviewed-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260526064818.272516-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
/proc/net/igmp6 walks IPv6 multicast memberships under RCU and prints
mca_users without holding idev->mc_lock, while multicast join and leave
paths update the field while holding idev->mc_lock. Annotate this
intentional lockless snapshot with READ_ONCE() and the matching writers
with WRITE_ONCE().
Signed-off-by: Yuyang Huang <sigefriedhyy@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260524022456.20689-1-sigefriedhyy@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Consolidate the namelen checks and return -EINVAL early if needed. Drop
the namelen == 0 check since it is covered by namelen < 3.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260525095400.821912-3-thorsten.blum@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
hci_le_create_cis_sync() dereferences conn->conn_timeout after releasing
both rcu_read_lock() and hci_dev_lock(hdev). The conn pointer was
obtained from an RCU-protected iteration over hdev->conn_hash.list and
is not valid once these locks are dropped. A concurrent disconnect can
free the hci_conn between the unlock and the dereference, causing a
use-after-free read.
The cancellation mechanism in hci_conn_del() cannot prevent this because
hci_le_create_cis_pending() queues hci_create_cis_sync with data=NULL:
hci_cmd_sync_queue(hdev, hci_create_cis_sync, NULL, NULL);
While hci_conn_del() dequeues with data=conn:
hci_cmd_sync_dequeue(hdev, NULL, conn, NULL);
Since NULL != conn, the lookup in _hci_cmd_sync_lookup_entry() never
matches, and the pending work item is not cancelled.
Fix this by saving conn->conn_timeout into a local variable while the
locks are still held, so the stale conn pointer is never dereferenced
after unlock.
This is the same class of bug as the one fixed by commit 035c25007c
("Bluetooth: hci_sync: Fix UAF on le_read_features_complete") which
addressed the identical pattern in a different function.
This vulnerability was identified using 0sec.ai, an open-source
automated security auditing platform (https://github.com/0sec-labs).
Fixes: c09b80be6f ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED")
Cc: stable@vger.kernel.org
Reported-by: Doruk Tan Ozturk <doruk@0sec.ai>
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The skb_clone() function can return NULL if memory allocation fails.
send_mcast_pkt() calls skb_clone() without checking the return value, which
can lead to a NULL pointer dereference in send_pkt() when it dereferences
skb->data.
Add a NULL check after skb_clone() and skip the peer if the clone fails.
Fixes: 18722c2470 ("Bluetooth: Enable 6LoWPAN support for BT LE devices")
Signed-off-by: Zhao Dongdong <zhaodongdong@kylinos.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hidp_input_report() reads keyboard and mouse payload data from an skb
without first verifying that skb->len contains enough data.
hidp_recv_intr_frame() pulls the 1-byte HIDP header before dispatching
to hidp_input_report(). If a paired device sends a truncated packet,
the handler reads beyond the valid skb data, resulting in an
out-of-bounds read of skb data. The OOB bytes may be interpreted as
phantom key presses or spurious mouse movement.
Replace the open-coded length tracking and pointer arithmetic with
skb_pull_data() calls. skb_pull_data() returns NULL if the requested
bytes are not present, eliminating the need for a manual size variable
and the separate skb->len guard.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_chan_close() removes the channel from conn->chan_l, which
must be done under conn->lock. cleanup_listen() runs under the
parent sk_lock, so acquiring conn->lock would invert the
established conn->lock -> chan->lock -> sk_lock order.
Instead of calling l2cap_chan_close() directly, schedule
l2cap_chan_timeout with delay 0 to close the channel
asynchronously. The timeout handler already acquires conn->lock
and chan->lock in the correct order.
The timer is only armed when chan->conn is still set: if it is
already NULL, l2cap_conn_del() has already processed this channel
(l2cap_chan_del + l2cap_sock_teardown_cb + l2cap_sock_close_cb),
so there is nothing left to do. If l2cap_conn_del() races in
after the timer is armed, __clear_chan_timer() inside
l2cap_chan_del() cancels it; if the timer has already fired, the
handler returns harmlessly because chan->conn was cleared.
Fixes: 3df91ea20e ("Bluetooth: Revert to mutexes from RCU list")
Cc: <stable@vger.kernel.org> # 0b58004: Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del()
Signed-off-by: Siwei Zhang <oss@fourdim.xyz>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
__set_chan_timer() takes a l2cap_chan reference via l2cap_chan_hold()
before scheduling the delayed work. The normal path in
l2cap_chan_timeout() drops this reference with l2cap_chan_put() at the
end, but the early return when chan->conn is NULL skips the put,
leaking the reference.
Add the missing l2cap_chan_put() before the early return.
Fixes: adf0398cee ("Bluetooth: l2cap: fix null-ptr-deref in l2cap_chan_timeout")
Cc: stable@vger.kernel.org
Signed-off-by: Siwei Zhang <oss@fourdim.xyz>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_le_big_terminate() allocates iso_list_data via kzalloc_obj but
returns 0 without freeing it when neither pa_sync_term nor big_sync_term
flags are set after evaluating the PA and BIG sync connection state.
This early-return path was introduced when hci_le_big_terminate() was
refactored to take struct hci_conn instead of raw u8 parameters, adding
PA/BIG flag evaluation logic. The existing kfree() on hci_cmd_sync_queue
failure does not cover this path.
Fixes: a7bcffc673 ("Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections")
Cc: stable@vger.kernel.org
Signed-off-by: Pavitra Jha <jhapavitra98@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When user requests RTEXT_FILTER_NAME_ONLY flag, we limit the dump
parts to:
- struct nlmsghdr
- IFLA_IFNAME
- IFLA_PROP_LIST (alternate names)
- This saves space in the dump, pushing more devices per system call.
- This can be done without acquiring RTNL.
I still have a medium term goal to avoid RTNL in rtnl_dump_ifinfo()
regardless of RTEXT_FILTER_NAME_ONLY being used.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260525083542.1565964-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When RTEXT_FILTER_NAME_ONLY is requested, rtnl_fill_ifinfo()
is dumping device attributes which do not need RTNL protection.
Many shell scripts invoke iproute2 commands specifying a device by
its name. After this patch, they will no longer add RTNL pressure.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260525083542.1565964-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the following patch, we want to call rtnl_fill_prop_list() without
RTNL being held, but after a device reference was taken.
We need to free altnames in netdev_run_todo() instead of
unregister_netdevice_many_notify().
Freeing will only happen once all device references
have been released.
Note that dev->name_node serves as the anchor for altnames,
thus must be also freed in netdev_run_todo().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260525083542.1565964-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Avoid corrupting a netlink message and confuse user space in the
very unlikely case rtnl_fill_prop_list was able to produce a very big
nested element.
This is extremely unlikely, because rtnl_prop_list_size()
provisions nla_total_size(ALTIFNAMSIZ) per altname.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260525083542.1565964-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6_datagram_recv_specific_ctl() builds IPV6_{HOPOPTS,DSTOPTS,RTHDR}
cmsgs (and their IPV6_2292* legacy counterparts) by trusting the
on-wire hdrlen byte (ptr[1]) when computing the put_cmsg() length.
The length was validated only at parse time (ipv6_parse_hopopts(),
etc.). An nftables payload-write expression can rewrite hdrlen after
parsing and before the skb reaches recvmsg; the write itself is
in-bounds but put_cmsg() then reads up to ((hdrlen+1) << 3) = 2040
bytes from an 8-byte header. nftables is reachable from an
unprivileged user namespace, so this is an unprivileged
slab-out-of-bounds read:
BUG: KASAN: slab-out-of-bounds in put_cmsg+0x3ac/0x540
put_cmsg+0x3ac/0x540
udpv6_recvmsg+0xca0/0x1250
sock_recvmsg+0xdf/0x190
____sys_recvmsg+0x1b1/0x620
Add ipv6_get_exthdr_len() which validates that at least two bytes
are accessible before reading the hdrlen field, then checks the
computed length against skb_tail_pointer(skb), returning 0 on
failure. Extension headers are kept in the linear skb area by
pskb_may_pull() during input, so skb_tail_pointer() is the correct
bound.
Use ipv6_get_exthdr_len() at all non-AH call sites: the five
standalone cmsg blocks (HbH, 2292HbH, 2292DSTOPTS x2, 2292RTHDR)
and the three standard cases in the extension-header walk loop
(DSTOPTS, ROUTING, default). AH retains an inline bounds check
because its length formula differs ((ptr[1]+2)<<2).
The walk loop also gets a pre-read bounds check at the top to
validate ptr before any case accesses ptr[0] or ptr[1].
When the walk loop detects a corrupted header, return from the
function instead of continuing to process later socket options.
Cc: stable@vger.kernel.org
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Qi Tang <tpluszz77@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260523143245.2281415-1-tpluszz77@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Supervision frames are only valid if terminated with a zero-length EOT
TLV. The current check fails to reject non-EOT entries as the terminal
TLV, potentially allowing malformed supervision traffic.
Fix this by strictly requiring the terminal TLV to be HSR_TLV_EOT with
a length of zero.
Signed-off-by: Luka Gejak <luka.gejak@linux.dev>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260523130420.62144-1-luka.gejak@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In some cases, iptunnel_pmtud_check_icmp() can be called while
skb transport header is not set.
This triggers an out-of-bound access, because
(typeof(skb->transport_header))~0U is 65535.
Access the icmp header based on IPv4 network header,
after making sure icmp->type is present in skb linear part.
Note that iptunnel_pmtud_check_icmpv6()) is fine.
Fixes: 4cb47a8644 ("tunnels: PMTU discovery support for directly bridged IP packets")
Reported-by: Damiano Melotti <melotti@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260522115512.1519110-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko found that iptunnel_pmtud_build_icmp() and
iptunnel_pmtud_build_icmpv6() were caching ip_hdr() and ipv6_hdr()
before an skb_cow() call which can reallocate skb->head.
Fix this possible UAF by initializing the local variables
after the skb_cow() call.
Remove skb_reset_network_header() calls which were not needed.
Fixes: 4cb47a8644 ("tunnels: PMTU discovery support for directly bridged IP packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://patch.msgid.link/20260525201335.2361845-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bkBh
-----END PGP SIGNATURE-----
Merge tag 'nf-next-26-05-25' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter: updates for net-next
The following patchset contains Netfilter fixes and small enhancements:
1) Disable 32-bit x_tables compatibility (32bit binaries on 64bit
kernel) interface in user namespaces. This is 'last warning'
before this is removed for good.
2) Add a configuration toggle for netfilter GCOV profiling. Provide
dedicated toggles for ipset and ipvs.
3) Remove modular support for nfnetlink and restrict it to built-in only.
From Pablo Neira Ayuso.
4) Use per-rule hash initval in nf_conncount. This avoids unecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
5) Use nf_ct_exp_net() in ctnetlink expectation dumps.
From Pratham Gupta.
6) Remove a dead conditional in nft_set_rbtree.
7) Fix conntrack helper policy updates to apply per-class values correctly.
From David Carlier.
8) Fix an off-by-one OOB read in nf_conntrack_irc:parse_dcc(). Use strict
less-than comparison in the newline search loop to respect the
exclusive-end pointer convention. From Muhammad Bilal.
9) Fix typos in nf_conntrack_proto_tcp comments. From Avinash Duduskar.
10) Restore performance optimization in nft_set_pipapo_avx2 by passing
the next map index. Refactor lookup logic for clarity and add a
DEBUG_NET check to document this.
11) Avoid (harmless) u16 overflow in nf_conntrack_ftp when parsing FTP PORT
and EPRT commands. Ignore commands where single octet exceeds 255.
From Giuseppe Caruso.
Patch 12, which removes incorrect (and obviously unused) code from
nft_byteorder was kept back to avoid a net -> net-next merge conflict.
* tag 'nf-next-26-05-25' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_conntrack_ftp: avoid u16 overflows
netfilter: nft_set_pipapo_avx2: restore performance optimization
netfilter: nf_conntrack_proto_tcp: fix typos in comments
netfilter: nf_conntrack_irc: fix parse_dcc() off-by-one OOB read
netfilter: nfnl_cthelper: apply per-class values when updating policies
netfilter: nft_set_rbtree: remove dead conditional
netfilter: ctnetlink: use nf_ct_exp_net() in expectation dump
netfilter: nf_conncount: use per-rule hash initval
netfilter: allow nfnetlink built-in only
netfilter: add option for GCOV profiling
netfilter: x_tables: disable 32bit compat interface in user namespaces
====================
Link: https://patch.msgid.link/20260525182924.28456-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a router temporarily deprecates an IPv6 prefix (either by sending a
Router Advertisement with Preferred Lifetime = 0 or by letting the
lifetime expire) and later restores it, the kernel permanently loses its
ability to generate temporary privacy addresses (RFC 8981) for that
prefix.
This happens because the address worker attempts to generate a
replacement temporary address when the current one nears expiration. As
the base prefix is deprecated already, the generation fails after
marking the temporary address as already having spawned a replacement
(ifp->regen_count++).
When the router eventually restores the prefix, the temporary address
becomes active again. However, once it naturally expires, the address
worker sees this temporary address already tried to generate one and
skips the regeneration.
Fix the issue by resetting the regen_count check of the latest temp
address generated for the prefix updated by the incoming RA.
Reported-by: Łukasz Stelmach <steelman@post.pl>
Closes: https://lore.kernel.org/netdev/87340td30q.fsf%25steelman@post.pl/
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260523103811.3790-1-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A reader in l2tp_session_get_by_ifname() can return a pointer to a
session whose refcount has reached zero. The getter takes its
reference with plain refcount_inc(), but every other session getter
in the same file (l2tp_v2_session_get, l2tp_v3_session_get, and the
corresponding _get_next variants) uses refcount_inc_not_zero()
because the IDR/RCU lookup can race with refcount_dec_and_test() ->
l2tp_session_free() -> kfree_rcu(). The ifname getter is the only
outlier; the inconsistency was raised on-list after 979c017803
("l2tp: use list_del_rcu in l2tp_session_unhash").
A reader inside rcu_read_lock_bh() that matches session->ifname can
be preempted between the strcmp() and the refcount_inc(). If the
last reference drops on another CPU in that window, the reader's
refcount_inc() runs on a counter that has reached zero. refcount_t
catches the addition-on-zero, prints "refcount_t: addition on 0;
use-after-free", saturates the counter, and returns the saturated
pointer to the caller. Session memory is held live by the in-flight
RCU read section, but the kfree_rcu() callback queued from
l2tp_session_free() will free it once the grace period closes; a
caller that dereferences the returned session past that point hits
a slab-use-after-free. On PREEMPT_RT local_bh_disable() is a per-CPU
sleeping lock and the preemption window is real; on stock PREEMPT
kernels local_bh_disable() is a preempt_count increment that closes
the cross-CPU race in practice (see below).
Use refcount_inc_not_zero() and continue the list walk on failure,
matching the other session getters in the file. The ifname getter
is the only session getter in net/l2tp/ that still uses the bare
refcount_inc() pattern; this change restores file-internal
consistency. The success path is unchanged.
Fixes: abe7a1a7d0 ("l2tp: improve tunnel/session refcount helpers")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: James Chapman <jchapman@katalix.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260523023423.2568972-1-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Skip the extra call to napi->poll(), if the gro timer is armed at the
end of busy polling. This removes the need for having a separate
__busy_poll_stop() routine and its code is moved directly into the
relevant places in busy_poll_stop(). Remove obsolete comment about
ndo_busy_poll_stop().
This is a follow-up to commit 58e2330bd4 ("net: napi: Avoid gro timer
misfiring at end of busypoll"), which has deferred arming the gro timer
to the end of __busy_poll_stop() to eliminate a race condition between
a short timer and long poll that could leave the queue stuck with
interrupts disabled and no timer armed.
Co-developed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Martin Karsten <mkarsten@uwaterloo.ca>
Link: https://patch.msgid.link/20260523012247.1574691-1-mkarsten@uwaterloo.ca
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most of the lls source files are missing SPDX-License-Identifier
lines. Add appropriate IDs to these files, and remove other license
info from the header. In once case, leave the existing id line
and just remove the license reference text.
Signed-off-by: Tim Bird <tim.bird@sony.com>
Link: https://patch.msgid.link/20260522225508.24006-1-tim.bird@sony.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Issues reported with v7.1-rc:
- Tighten bounds checking for sunrpc cache hash tables
- Don't report key material in the ftrace log
Issues that need expedient stable backports:
- Fix lockd's implementation of the NLM TEST procedure
-----BEGIN PGP SIGNATURE-----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=onHe
-----END PGP SIGNATURE-----
Merge tag 'nfsd-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"Regressions:
- Tighten bounds checking for sunrpc cache hash tables
- Don't report key material in the ftrace log
Stable fix:
- Fix lockd's implementation of the NLM TEST procedure"
* tag 'nfsd-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
lockd: fix TEST handling when not all permissions are available.
NFSD: Report whether fh_key was actually updated
sunrpc: prevent out-of-bounds read in __cache_seq_start()
post-7.1 issues or aren't considered suitable for backporting.
All patches are singletons - please see the individual changelogs for
details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCahTZ2QAKCRDdBJ7gKXxA
ju+UAQDUga+l95O1iOnrraKFWvT1ghQKTgbNxGMwefHjVLLFBQD+Ln2wPfz73Ks7
H8WK0k5D0g+6lKs6tFGAALdQnTU0BAU=
=MYsv
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2026-05-25-16-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"13 hotfixes. 9 are for MM. 9 are cc:stable and the remaining 4 address
post-7.1 issues or aren't considered suitable for backporting.
All patches are singletons - please see the individual changelogs for
details"
* tag 'mm-hotfixes-stable-2026-05-25-16-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
Revert "mm: introduce a new page type for page pool in page type"
mm/vmalloc: do not trigger BUG() on BH disabled context
MAINTAINERS, mailmap: change email for Eugen Hristev
mm/migrate_device: fix pgtable leak in migrate_vma_insert_huge_pmd_page
kernel/fork: validate exit_signal in kernel_clone()
mm: memcontrol: propagate NMI slab stats to memcg vmstats
mm/damon/sysfs-schemes: delete tried region in regions_rmdirs()
mm/rmap: initialize nr_pages to 1 at loop start in try_to_unmap_one
zram: fix use-after-free in zram_writeback_endio
memfd: deny writeable mappings when implying SEAL_WRITE
ipc: limit next_id allocation to the valid ID range
Revert "mm/hugetlbfs: update hugetlbfs to use mmap_prepare"
MAINTAINERS: .mailmap: update after GEHC spin-off
cmis_fw_update_start_download() copies start_cmd_payload_size bytes
from the firmware blob into the CDB LPL vendor_data[] payload without
validating that the FW has enough data.
Since the start_cmd_payload_size can only be ~120B an image too short
is most likely corrupted, so reject it.
Fixes: c4f78134d4 ("ethtool: cmis_fw_update: add a layer for supporting firmware update using CDB")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The CMIS firmware update code reads start_cmd_payload_size from
the module's FW Management Features CDB reply and uses it directly
as the byte count for memcpy. The destination buffer is 112 bytes
(ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH - 8). So a malicious
module (or corrupted response) can cause a OOB write later on in
cmis_fw_update_start_download().
Let's error out. If modules that expect longer LPL writes actually
exist we should revisit.
struct cmis_cdb_start_fw_download_pl's definition has to move,
no change there.
Fixes: c4f78134d4 ("ethtool: cmis_fw_update: add a layer for supporting firmware update using CDB")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethtool_cmis_cdb_compose_args() accepts msleep_pre_rpl as u16 but stores
it into the u8 field ethtool_cmis_cdb_cmd_args::msleep_pre_rpl, silently
truncating values >= 256. Seven of the nine call sites pass 1000 ms
(it's the third argument from the end).
Fixes: a39c84d796 ("ethtool: cmis_cdb: Add a layer for supporting CDB commands")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Malicious SFP module could respond with rpl_len longer than
what cmis_cdb_process_reply() expected, leading to OOB writes.
Malicious HW is a bit theoretical but some modules may just
be buggy and/or the reads may occasionally get corrupted,
so let's protect the kernel.
The existing check protects from short replies. We need to
protect from long ones, too. All callers that pass a non-zero
rpl_exp_len cast the reply payload to a fixed-layout struct
and read fields at fixed offsets, with no version negotiation
or short-reply handling:
- cmis_cdb_validate_password()
- cmis_cdb_module_features_get()
- cmis_fw_update_fw_mng_features_get()
so let's assume that responses longer than expected do not
have to be handled gracefully here. Add a warning message
to make the debug easier in case my understanding is wrong...
Note that page_data->length (argument of kmalloc) comes from
last arg to ethtool_cmis_page_init() which is rpl_exp_len.
Note2 that AIs also like to point out overflows in args->req.payload
itself (which is a fixed-size 120 B buffer, on the stack),
but callers should be reading structs defined by the standard,
so protecting from requests for more data than max seem like
defensive programming.
Fixes: a39c84d796 ("ethtool: cmis_cdb: Add a layer for supporting CDB commands")
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a single Netlink socket issues MODULE_FW_FLASH_ACT against multiple
devices, ethnl_sock_priv_set() overwrites sk_priv->dev on each call,
retaining only the last one. The socket priv is used on socket close,
to walk the global work list and mark the uncompleted flashing work
as "orphaned". Otherwise if another socket reuses the PID it will
unexpectedly receive the flashing notifications.
Don't record the device, record net pointer instead. The purpose of
the dev is to scope the work to a netns, anyway. If we store netns
the overrides are safe/a nop since all flashed devices must be in
the same netns as the socket.
Fixes: 32b4c8b53e ("ethtool: Add ability to flash transceiver modules' firmware")
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethnl_set_module_validate() inspects module_fw_flash_in_progress
but validate is meant for _input_ validation, not state validation.
rtnl_lock is not held, yet. Move the check into ethnl_set_module().
Fixes: 32b4c8b53e ("ethtool: Add ability to flash transceiver modules' firmware")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When reviewing other changes Gemini points out that we currently
update module_fw_flash_in_progress without holding any locks.
Since module_fw_flash_in_progress is part of a bitfield this
is not great, updates to other fields may be lost.
We could use a bool and sprinkle some READ_ONCE/WRITE_ONCE here
but seems like the issue is rather than the work is an unusual
writer. The other writers already hold the right locks. So just
very briefly take these locks when the work completes.
Note that nothing ever cancels the FW update work, so there's
no concern with deadlocks vs cancel.
Fixes: 32b4c8b53e ("ethtool: Add ability to flash transceiver modules' firmware")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
module_flash_fw_schedule() is missing undo for setting
the "in_progress" flag and taking the netdev reference.
Delay taking these, the device can't disappear while
we are holding rtnl_lock.
Fixes: 32b4c8b53e ("ethtool: Add ability to flash transceiver modules' firmware")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When validate() fails we are skipping over ethnl_ops_complete()
even tho we already called ethnl_ops_begin().
Fixes: 32b4c8b53e ("ethtool: Add ability to flash transceiver modules' firmware")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We wait with filling the reply for new RSS context creation
until after the driver ->create_rxfh_context call. The driver
needs to fill some of the defaults in the context. The failure
of rss_fill_reply() is somewhat theoretical, but doesn't take
much effort to handle it properly. Call ->remove_rxfh_context().
If the driver's remove callback fails (some implementations like sfc
can return real command errors from firmware RPCs) - skip the xa_erase
and kfree, leaving the context in the xarray. This matches how
ethnl_rss_delete_doit() behaves.
Fixes: a166ab7816 ("ethtool: rss: support creating contexts via Netlink")
Link: https://patch.msgid.link/20260522230647.1705600-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rss_get_data_alloc() allocates a single buffer that backs both the
indirection table and the hash key, but only assigned data->indir_table
when indir_size was nonzero. The expectation was that no driver
implements RSS without supporting indirection table but apparently
enic does just that (it's the only such in-tree driver).
enic has get_rxfh_key_size but no get_rxfh_indir_size.
data->indir_table stays as NULL, hkey gets set but rss_get_data_free()
kfree(data->indir_table) is a nop and the allocation leaks.
Always store the allocation base in data->indir_table so the free path
is unambiguous. No caller treats indir_table as a sentinel; everything
keys off indir_size.
Fixes: 7112a04664 ("ethtool: add netlink based get rss support")
Link: https://patch.msgid.link/20260522230647.1705600-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rss_prepare_get() allocates the indirection table and hash key buffer
via rss_get_data_alloc(), then calls ops->get_rxfh() to populate them.
If get_rxfh() fails, the function returns an error without freeing
the allocation.
Fixes: 4f038a6a02 ("net: ethtool: Don't call .cleanup_data when prepare_data fails")
Link: https://patch.msgid.link/20260522230647.1705600-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rss_set_prep_indir() compares the new indirection table against the
current one to determine whether any update is needed. The memcmp
call passes data->indir_size as the length argument, but indir_size
is the number of u32 entries, not the byte count.
Fixes: c0ae03588b ("ethtool: rss: initial RSS_SET (indirection table handling)")
Link: https://patch.msgid.link/20260522230647.1705600-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remember to set ret before jumping out if someone tries
to delete a context on a device which doesn't support
contexts.
Fixes: fbe09277fa ("ethtool: rss: support removing contexts via Netlink")
Link: https://patch.msgid.link/20260522230647.1705600-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gemini says that we're modifying the RSS_CREATE response skb.
I think it's right, the comment says that unicast() should
unshare the skb but I'm not entirely sure what I meant there.
netlink_trim() does a copy but only if skb is not well sized
(it's at least 2x larger than necessary for the payload).
Fixes: a166ab7816 ("ethtool: rss: support creating contexts via Netlink")
Link: https://patch.msgid.link/20260522230647.1705600-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pskb_trim_rcsum_slow() keeps CHECKSUM_COMPLETE valid by subtracting
the checksum of the bytes removed from the skb tail. That assumes the
removed bytes can be read.
io_uring zcrx skbs may contain unreadable net_iov frags. With fbnic
header/data split, small TCP/IPv4 packets can carry Ethernet padding
in such a frag. ip_rcv_core() trims the skb to iph->tot_len before TCP
sees it, and the CHECKSUM_COMPLETE adjustment then calls
skb_checksum() on the padding.
This is exposed by IPv4 because small TCP/IPv4 frames can be shorter
than the Ethernet minimum payload. TCP/IPv6 frames are large enough in
the normal zcrx path, so they do not hit the same padding trim.
Keep the existing checksum adjustment for readable skbs. If the
remaining packet is fully linear, drop CHECKSUM_COMPLETE and let the
stack validate the packet after trimming. If unreadable payload would
remain, fail the trim; the checksum cannot be adjusted without reading
the trimmed tail.
Also clear skb->unreadable when trimming removes all frags.
Fixes: 65249feb6b ("net: add support for skbs with unreadable frags")
Signed-off-by: Björn Töpel <bjorn@kernel.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260522120643.242974-1-bjorn@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After patch 1/2 in this series, vti6_update() unlinks and relinks
the tunnel through t->net. vti6_siocdevprivate() still uses
dev_net(dev) for the collision lookup. For a tunnel moved through
IFLA_NET_NS_FD, dev_net(dev) is the new netns, not t->net.
SIOCCHGTUNNEL on a migrated tunnel then runs:
net = dev_net(dev) /* migrated netns */
t = vti6_locate(net, &p1, false) /* misses target in t->net */
...
t = netdev_priv(dev)
vti6_update(t, &p1, false) /* mutates t->net's hash */
A caller in the migrated netns picks params that match a tunnel
in the creation netns. The lookup in dev_net(dev) finds nothing.
vti6_update() prepends the migrated tunnel at the head of the
creation netns hash bucket for those params. Later lookups in
the creation netns resolve to the migrated device. xfrm receive
delivers the matched packets through a device the caller controls.
Reachable from an unprivileged user namespace (unshare --user
--map-root-user --net). Cross tenant scope on container hosts.
Switch the SIOCCHGTUNNEL path on a non fallback device to use
t->net for the lookup. The lookup now matches the netns
vti6_update() operates on.
Also add ns_capable(self->net->user_ns, CAP_NET_ADMIN) before
the lookup. The check at the top of the case is against
dev_net(dev)->user_ns, which after migration is the attacker's
netns. A caller there can pick params absent from self->net,
the lookup returns NULL, t becomes self, and vti6_update()
inserts the device into the creation netns hash. The new check
requires CAP_NET_ADMIN in the creation netns user_ns too.
SIOCADDTUNNEL and SIOCCHGTUNNEL on the fallback device keep
dev_net(dev), which equals init_net there.
Fixes: 61220ab349 ("vti6: Enable namespace changing")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Xiao Liang <shaw.leon@gmail.com>
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Link: https://patch.msgid.link/20260521130555.3421684-3-maoyixie.tju@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ip netns add ns1
ip netns add ns2
ip -n ns1 link add vti6_test type vti6 remote ::1 local ::2 key 7
ip -n ns1 link set vti6_test netns ns2
ip -n ns2 link set vti6_test type vti6 remote ::3 local ::4 key 9
ip netns del ns2
ip netns del ns1
[ 132.495484] ------------[ cut here ]------------
[ 132.497609] kernel BUG at net/core/dev.c:12376!
Commit 61220ab349 ("vti6: Enable namespace changing") dropped
NETIF_F_NETNS_LOCAL from vti6 devices. A vti6 tunnel can then
move through IFLA_NET_NS_FD. After the move dev_net(dev) points
at the new netns while t->net stays at the creation netns.
vti6_changelink() and vti6_update() still use dev_net(dev) and
dev_net(t->dev). They unlink from one per netns hash and relink
into another. The creation netns is left with a stale entry.
cleanup_net() of that netns later walks freed memory.
Reachable from an unprivileged user namespace (unshare --user
--map-root-user --net). Cross tenant scope on container hosts.
Fixes: 61220ab349 ("vti6: Enable namespace changing")
Reported-by: Maoyi Xie <maoyi.xie@ntu.edu.sg>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260521130555.3421684-2-maoyixie.tju@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Transport-mode reinjection stores a struct net pointer in skb->cb and
uses it later from xfrm_trans_reinject(). That pointer must stay valid
until the deferred callback runs.
Take a netns reference when queueing deferred reinjection work and drop
it after the callback completes. Use maybe_get_net() so the queueing
path does not revive a namespace that is already being torn down.
This keeps the existing workqueue design and fixes the netns lifetime
handling in one place for all users of xfrm_trans_queue_net().
Fixes: 7b3801927e ("xfrm: introduce xfrm_trans_queue_net")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Co-developed-by: Luxing Yin <tr0jan@lzu.edu.cn>
Signed-off-by: Luxing Yin <tr0jan@lzu.edu.cn>
Signed-off-by: Zhengchuan Liang <zcliangcn@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Assisted-by: Codex:gpt-5.4
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The struct pernet_operations docstring in include/net/net_namespace.h
explicitly warns against blocking RCU primitives in .exit handlers:
Exit methods using blocking RCU primitives, such as
synchronize_rcu(), should be implemented via exit_batch.
[...]
Please, avoid synchronize_rcu() at all, where it's possible.
Note that a combination of pre_exit() and exit() can
be used, since a synchronize_rcu() is guaranteed between
the calls.
xfrm_policy_fini() violates this: it calls synchronize_rcu() before
freeing the policy_bydst hash tables (so no RCU reader is mid-
traversal at free time), but runs from xfrm_net_ops.exit -- once per
namespace -- so a cleanup_net() of N namespaces pays N full RCU
grace periods serially.
Use the documented pre_exit/exit split. Move the policy flush (and
the workqueue drains it depends on) into a new .pre_exit handler;
xfrm_policy_fini() then runs in .exit and frees the hash tables
after the synchronize_rcu_expedited() that cleanup_net() guarantees
between the two phases. Providing O(1) RCU grace periods per batch
instead of O(N).
Observed on Linux 6.18 with a workload doing unshare(CLONE_NEWNET)
at ~13/sec sustained: cleanup_net() and the netns_wq rescuer kthread
both stuck in xfrm_policy_fini()'s synchronize_rcu(), >300k struct
net accumulated in the cleanup queue, Percpu in /proc/meminfo climbed
to 130+ GB on 256-CPU hosts, and memcg OOMs followed. setup_net and
__put_net counts were balanced, ruling out a refcount leak.
Fixes: 069daad4f2 ("xfrm: Wait for RCU readers during policy netns exit")
Signed-off-by: Usama Arif <usama.arif@linux.dev>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
iptfs_clone_state() clones the IPTFS mode data with kmemdup(). This
copies runtime objects which must not be shared with the original SA,
including the embedded sk_buff_head, hrtimers, spinlock, and in-flight
reassembly/reorder state.
If xfrm_state_migrate() fails after clone_state() but before the later
init_state() call has reinitialized those fields, the cloned state can be
destroyed by xfrm_state_gc_task() with list and timer state copied from the
original SA. With queued packets this lets the clone splice and free skbs
owned by the original IPTFS queue, leading to use-after-free and
double-free reports in iptfs_destroy_state() and skb release paths.
Reinitialize the clone's runtime state before publishing it through
x->mode_data. Because clone_state() now publishes a destroyable mode_data
object before init_state(), take the mode callback module reference there.
Avoid taking it again from __iptfs_init_state() for the same object.
Fixes: 0e4fbf013f ("xfrm: iptfs: add user packet (tunnel ingress) handling")
Cc: stable@vger.kernel.org
Signed-off-by: Shaomin Chen <eeesssooo020@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Ensure the entire TLV header is linearized before access by adding
sizeof(struct hsr_sup_tlv) to the pskb_may_pull() calls. Without this,
a truncated frame could cause an out-of-bounds access.
Fixes: eafaa88b3e ("net: hsr: Add support for redbox supervision frames")
Signed-off-by: Luka Gejak <luka.gejak@linux.dev>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260523130330.61880-1-luka.gejak@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
union devlink_param_value grows substantially once U64 array
parameters are added to devlink (from 32 bytes to over 264 bytes).
devlink_nl_param_value_fill_one() and devlink_nl_param_value_put()
copy the union by value in several places. Passing two instances as
value arguments alone consumes over 528 bytes of stack; combined with
deeper call chains the parameter stack can approach 800 bytes and trip
CONFIG_FRAME_WARN more easily.
Switch internal helpers and exported driver APIs to pass pointers to
union devlink_param_value rather than passing the union by value.
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Acked-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Arthur Kiyanovski <akiyano@amazon.com> #for ena
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260521095303.2395584-4-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RDS_INFO_* family of getsockopt(2) options reads several
file-scope global lists that are not per-netns:
rds_sock_info / rds6_sock_info,
rds_sock_inc_info / rds6_sock_inc_info -> rds_sock_list
rds_tcp_tc_info / rds6_tcp_tc_info -> rds_tcp_tc_list
rds_conn_info / rds6_conn_info,
rds_conn_message_info_cmn (for the *_SEND_MESSAGES and
*_RETRANS_MESSAGES variants),
rds_for_each_conn_info (for RDS_INFO_IB_CONNECTIONS)
-> rds_conn_hash[]
The handlers do not filter by the caller's network namespace.
rds_info_getsockopt() has no netns or capable() check, and
rds_create() has no capable() check, so AF_RDS is reachable from
an unprivileged user namespace. As a result, an unprivileged
caller in a fresh user_ns plus netns can read the bound address
and sock inode of every RDS socket on the host, the peer address
of incoming messages on every RDS socket on the host, the peer
address and TCP sequence numbers of every rds-tcp connection on
the host, and the peer address and RDS sequence numbers of every
RDS connection on the host.
The rds-tcp transport is reachable from a non-initial netns (see
rds_set_transport()), so a one-shot init_net gate at
rds_info_getsockopt() would deny legitimate per-netns visibility
to rds-tcp callers. Instead, filter at each handler by comparing
the netns of the caller's socket to the netns of the list entry,
or to rds_conn_net(conn) for connection paths. Only copy entries
whose netns matches the caller. Counters (RDS_INFO_COUNTERS) are
aggregate statistics and remain global.
Reproducer (KASAN VM, rds and rds_tcp loaded): an AF_RDS socket
binds 127.0.0.1:4242 in init_net as root. A child process enters
a fresh user_ns plus netns and opens AF_RDS there, then calls
getsockopt(SOL_RDS, RDS_INFO_SOCKETS). Before this change, the
child sees the init_net socket. After this change, the child
sees zero entries.
Drop the rds_sock_count, rds_tcp_tc_count, and rds6_tcp_tc_count
globals. v2 used them for the size precheck and lens->nr; v3
replaced the precheck with a per-ns count from a first pass over
the list, so the globals have no remaining readers. The matching
increments and decrements in rds_create()/rds_destroy_sock() and
rds_tcp_set_callbacks()/rds_tcp_restore_callbacks() go away with
them. Reported by the kernel test robot under clang W=1.
Suggested-by: Allison Henderson <achender@kernel.org>
Suggested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Allison Henderson <achender@kernel.org>
Co-developed-by: Praveen Kakkolangara <praveen.kakkolangara@aumovio.com>
Signed-off-by: Praveen Kakkolangara <praveen.kakkolangara@aumovio.com>
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Link: https://patch.msgid.link/20260520084236.2724349-1-maoyixie.tju@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netlbl_unlhsh_add_addr6() always returned zero after
netlbl_af6list_add(), masking failures such as duplicate
IPv6 static label entries.
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://patch.msgid.link/20260522022910.398416-1-zhaochenguang@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cl->quantum does not need to be protected by RTNL or qdisc spinlock.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260522110356.1403343-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
/proc/net/igmp walks IPv4 multicast memberships under RCU and
prints im->users without holding RTNL, while multicast join and leave
paths update the field while holding RTNL. Annotate this intentional
lockless snapshot with READ_ONCE() and the matching writers with
WRITE_ONCE().
Signed-off-by: Yuyang Huang <sigefriedhyy@gmail.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260522093906.39764-1-sigefriedhyy@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6_parse_tlv() caches skb_network_header(skb) in nh while walking
IPv6 TLVs.
ipv6_dest_hao() may call pskb_expand_head() for a cloned skb, which can
move the skb head and invalidate the cached network header pointer.
Refresh nh after ipv6_dest_hao() returns so any trailing padding or TLVs
are parsed from the current skb head.
This matches the existing pattern used in ip6_parse_tlv() after helpers
that can modify skb header storage.
Fixes: a831f5bbc8 ("[IPV6] MIP6: Add inbound interface of home address option.")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Co-developed-by: Luxing Yin <tr0jan@lzu.edu.cn>
Signed-off-by: Luxing Yin <tr0jan@lzu.edu.cn>
Signed-off-by: Zhengchuan Liang <zcliangcn@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Justin Iurman <justin.iurman@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/7aba1debc2196189172499e5769802b026f8caf8.1779247873.git.zcliangcn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
get_port and try_number() parse comma-separated decimal values from FTP PORT
and EPRT commands into a u_int32_t array, but does not validate that each
value fits in a single octet. RFC 959 specifies that PORT parameters
are decimal integers in the range 0-255, representing the four octets
of an IP address followed by two octets encoding the port number.
Values exceeding 255 are silently accepted. In try_rfc959(), the raw
u32 values are combined via shift-and-OR to form the IP and port:
cmd->u3.ip = htonl((array[0] << 24) | (array[1] << 16) |
(array[2] << 8) | array[3]);
cmd->u.tcp.port = htons((array[4] << 8) | array[5]);
When array elements exceed 255, bits from one field bleed into adjacent
fields after shifting, producing IP addresses and port numbers that
differ from what the text representation suggests. For example,
"PORT 10,0,1,2,256,22" yields port (256<<8)|22 = 65558, truncated to
u16 = 22. This mismatch between the textual and computed values can
confuse network monitoring tools that parse FTP commands independently.
Ignore the command by returning 0 (no match) when any accumulated
value exceeds 255 so that no expectation is created.
Signed-off-by: Giuseppe Caruso <giuseppecaruso0990@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
-----BEGIN PGP SIGNATURE-----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=aOa1
-----END PGP SIGNATURE-----
Merge tag 'nf-26-05-22' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: updates for net
Patches 7+8 fix a regression from 7.1-rc1. Everything else
is from 2.6.x to 5.3 releases. There are additional known
issues with these patches (drive-by-findings in related code).
There are many old bugs all over netfilter and our ability to review
feature patches has come to a complete halt due to lack of time.
There are further security bugs that we cannot address
due to lack of time, maintainers and reviewers.
Other remarks: The xtables 32bit compat interface is already
off in many vendor kernels, the plan is to remove it soon.
1) Prevent RST packets with invalid sequence numbers from forcing TCP
connections into the CLOSE state without a direction check.
From Hamza Mahfooz.
2) Re-derive the TCP header pointer after skb_ensure_writable in
synproxy_tstamp_adjust. Prevent use-after-free and invalid checksum
updates caused by stale pointers during buffer expansion.
From Chris Mason.
3) Fix a race condition causing keymap list corruption in conntracks gre/pptp
helper.
4) Use raw_smp_processor_id() in xt_cpu to prevent splats under
PREEMPT_RCU.
5) Disable netfilter payload mangling in user namespaces (nft_payload.c
and nf_queue).
TCP option mangling via nft_exthdr.c remains enabled.
There will be followups here to restrict resp. revalidate
headers.
6) Fix an out-of-bounds read in ebtables's compat_mtw_from_user function.
7) Use list_for_each_entry_rcu() to traverse fib6_siblings in
nft_fib6_info_nh_uses_dev(). Ensure safe list walking under RCU.
8) Fix an out-of-bounds read in nft_fib_ipv6 caused by incorrect list
traversal.
9) Add nft_fib_nexthop selftest to netfilter. Cover nexthop enumeration for
single, group, and multipath route shapes.
All three nft_fib6 fixes from Jiayuan Chen.
10) Fix destination corruption in shift operations when source and destination
registers overlap. Reject partial register overlap for all operations
from control plane. From Fernando Fernandez Mancera.
* tag 'nf-26-05-22' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: fix dst corruption in same register operation
selftests: netfilter: add nft_fib_nexthop test
netfilter: nft_fib_ipv6: handle routes via external nexthop
netfilter: nft_fib_ipv6: walk fib6_siblings under RCU
netfilter: ebtables: fix OOB read in compat_mtw_from_user
netfilter: disable payload mangling in userns
netfilter: xt_cpu: prefer raw_smp_processor_id
netfilter: nf_conntrack_gre: fix gre keymap list corruption
netfilter: synproxy: refresh tcphdr after skb_ensure_writable
netfilter: conntrack: tcp: do not force CLOSE on invalid-seq RST without direction check
====================
Link: https://patch.msgid.link/20260522104257.2008-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The avx2 lookup routines get the next map index to process passes as a
function argument, but this isn't obvious because it's hidden in the
lookup macro.
Additionally, a recent LLM review pointed out following "bug":
-------------------------------------------------------------
> b = nft_pipapo_avx2_refill(i_ul, &map[i_ul], fill, f->mt, last);
> if (last)
> - return b;
> + ret = b;
>
> if (unlikely(ret == -1))
> ret = b / XSAVE_YMM_SIZE;
Does this change introduce a logic error when last=true and no match is
found? [..]
Should this be changed to an else-if structure instead?
-------------------------------------------------------------
LLM sees a control-flow change, but there is none:
All call sites invoke nft_pipapo_avx2_refill() only when at least one
bit in the map is set, i.e. nft_pipapo_avx2_refill() never returns -1.
Add a runtime debug check that fires if we'd return -1 as additional
documentation and also make the suggested change, code might be easier
to understand this way.
In commit 17a20e09f0 ("netfilter: nft_set: remove one argument from
lookup and update functions") I incorrectly moved the "ret" scope into
the loop.
This has no effect on the correctness, but it can (depending on map sizes)
cause a redundant repeat of an earlier processing step.
Restore the intended 'pass map index' instead of always-0. Note that I
did not see any change in performance numbers, but Stefano correctly
points out that the existing perf test likely lack a sparse intermediate
bitmap (between fields) with a lot of leading zeroes.
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
parse_dcc() treats data_end as an inclusive end pointer, but its only
caller passes data_limit = ib_ptr + datalen, which points one past the
last valid byte.
The newline search loop iterates while tmp <= data_end, so when no
newline is present, *tmp is read at tmp == data_end, one byte beyond
the region filled by skb_header_pointer().
irc_buffer is kmalloc'd as MAX_SEARCH_SIZE + 1 bytes and datalen is
capped at MAX_SEARCH_SIZE, so the stray read does not fault. The byte
is uninitialized or stale; if it contains an ASCII digit, simple_strtoul
will consume it and produce a wrong DCC IP or port in the conntrack
expectation. The extra allocation byte is also a fragile guard: if the
cap or allocation size changes, this becomes a real out-of-bounds read.
Change the loop and its post-loop check to use strict less-than,
consistent with the caller's exclusive-end convention. Update the
function comment accordingly.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
When a userspace conntrack helper with multiple expectation classes is
updated via nfnetlink, every class ends up with the first class's
max_expected and timeout values.
nfnl_cthelper_update_policy_all() validates each new policy into the
corresponding slot of the temporary new_policy array, but the second
loop that commits the values into the live helper dereferences
new_policy as a pointer instead of indexing it, so every iteration
reads new_policy[0] regardless of i. An update that changes per-class
values is silently collapsed onto class 0's values with no error
returned to userspace.
Index the temporary array by i in the commit loop so each class gets
its own validated values.
Fixes: 2c42225755 ("netfilter: nfnl_cthelper: fix runtime expectation policy updates")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
net/netfilter/nft_set_rbtree.c:399 __nft_rbtree_insert()
warn: 'removed_end' is not an error pointer
Since commit : 087388278e ("netfilter: nf_tables: nft_set_rbtree: fix
spurious insertion failure") __nft_rbtree_insert() can no longer fail
and this condition is always false. Remove it.
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/netfilter-devel/adjSaolTji0mPgqx@stanley.mountain/
Signed-off-by: Florian Westphal <fw@strlen.de>
Commit 02a3231b6d ("netfilter: nf_conntrack_expect: store netns and zone in expectation")
introduced exp->net so RCU-only expectation paths no longer need to
dereference exp->master for netns lookups.
Commit 3db5647984 ("netfilter: nf_conntrack_expect: skip expectations in other netns via proc")
updated the proc path accordingly, but ctnetlink_exp_dump_table() still
compares against nf_ct_net(exp->master).
Use nf_ct_exp_net(exp) here as well so the netlink dump path matches
the rest of the March 2026 expectation netns/RCU cleanup.
Fixes: 02a3231b6d ("netfilter: nf_conntrack_expect: store netns and zone in expectation")
Cc: stable@vger.kernel.org
Signed-off-by: Pratham Gupta <pratham36gupta@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
As-is, different netns will use same slots if the key is the same.
OVS uses this infrastructure to limit conntrack counts per zones.
Those can easily overlap. Make them hash to different slots internally.
Signed-off-by: Florian Westphal <fw@strlen.de>
Netfilter has its own netlink multiplexer, initially only a few
subsystem were using it, most notably conntrack, queue and log,
later in time nf_tables. These days it is the control plane of
preference.
Just remove modular support for this, allow it built-in only.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Similar to a few other subsystems: add a new config toggle to
enable netfilter gcov profiling in netfilter, including ebtables,
arptables and so on.
ipset and ipvs gain their own, dedicated toggles.
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
This feature is required to use 32bit arp/ip/ip6/ebtables binaries on
64bit kernels. I don't think there are many users left.
Support has been a compile-time option since 2021 and defaults to off
since 2023.
The XTABLES_COMPAT config option is already off in many distributions
including Debian and Fedora.
Give a few more months before complete removal but disable support in
user namespaces already.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Florian Westphal <fw@strlen.de>
ipv4_sysctl_exit_net() is currently freeing net->ipv4.sysctl_local_reserved_ports
too soon.
Only after unregister_net_sysctl_table() we can be sure no threads can possibly
use the sysctls, including /proc/sys/net/ipv4/ip_local_reserved_ports.
Fixes: 122ff243f5 ("ipv4: make ip_local_reserved_ports per netns")
Reported-by: Ji'an Zhou <eilaimemedsnaimel@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://patch.msgid.link/20260521122147.3584624-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On 32-bit architectures, both skb_queue_len() and SKB_TRUESIZE(0) evaluate
to 32-bit values. The multiplication can overflow before being assigned to
the u64 skb_overhead variable, making the skb overhead check ineffective.
Cast skb_queue_len() to u64 so the multiplication is always performed in
64-bit arithmetic.
This issue was reported by Sashiko while reviewing another patch.
Fixes: 059b7dbd20 ("vsock/virtio: fix potential unbounded skb queue")
Closes: https://sashiko.dev/#/patchset/20260518090656.134588-1-sgarzare%40redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260521124732.125771-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mirror iucv_sock_setsockopt() and wrap the whole switch in
lock_sock()/release_sock(). The pre-existing SO_MSGLIMIT-only lock
becomes redundant and is removed.
Any AF_IUCV HIPER user can potentially crash the kernel by racing
recvmsg() with getsockopt(SO_MSGSIZE): the SO_MSGSIZE arm dereferences
iucv->hs_dev->mtu after iucv_sock_close() (called from the racing
recvmsg()) has set hs_dev to NULL, producing a NULL pointer dereference
oops.
Suggested-by: Stanislav Fomichev <sdf.kernel@gmail.com>
Fixes: 51363b8751 ("af_iucv: allow retrieval of maximum message size")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Tested-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://patch.msgid.link/20260521-af_iucv_fix2-v1-1-f16b1c510aa9@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
INIT_HLIST_HEAD(&smc_v*_hashinfo.ht) are called after smc_nl_init(),
proto_register() and sock_register(). This can lead to smc_v*_hashinfo.ht
being reset even though hash entries already exist and are being used,
possibly resulting in a corrupted list.
Remove unnecessary and dangerous re-initialisation of smc_v*_hashinfo.ht in
smc_init(); it is implicitly initialised to zero anyhow. Add
HLIST_HEAD_INIT to the definitions for clarity.
Fixes: f16a7dd5cf ("smc: netlink interface for SMC sockets")
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Link: https://patch.msgid.link/20260521145639.10317-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We plan to no longer hold RTNL in "ip link show", and use RCU instead.
Assume rtnl_fill_dpll_pin() will have to fill DPLL_A_PIN_ID.
It is fine to over-estimate skb size (by 8 bytes) in if_nlmsg_size().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260521171440.114956-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rtnl_af_lookup() does not rely on RTNL anymoe, remove the stale
ASSERT_RTNL().
Add a private spinlock (rtnl_af_ops_lock) to protect rtnl_af_ops
list instead of using RTNL.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260521174038.204481-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drivers might have error messages to propagate to user space. Propagate
the netlink extack so that they can inform user space in a verbal way of
their limitations.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260521010320.208138-3-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use NL_SET_ERR_MSG_WEAK so any existing error message (probably from the
underlying driver) is used instead of the generic fallback.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260521010320.208138-2-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In most cases, notifications on sockets with NETLINK_LISTEN_ALL_NSID
do not contain NSID in their ancillary data in case the event is local
to the listener.
However, when a self-referential NSID is allocated for a namespace,
every local notification starts sending this ID to the user space.
This is problematic, because the listener cannot tell if those
notifications are local or not anymore without making extra requests
to figure out if the provided NSID is local or not. The listener
can also not figure out the local NSID beforehand as it can be
allocated at any point in time by other processes, changing the
structure of the future notifications for everyone.
The value is practically not useful, since it's the namespace's own
ID that the application has to obtain from other sources in order to
figure out if it's the same or not. So, for the application it's
just an extra busy work with no benefits. Moreover, applications
that do not know about this quirk may be mishandling notifications
with NSID set as notifications from remote namespaces. This is the
case for ovs-vswitchd and the iproute2's 'ip monitor' that stops
printing 'current' and starts printing the nsid number mid-session.
Lack of clear documentation for this behavior is also not helping.
A search though open-source projects doesn't reveal any projects
that use NETNSA_NSID_NOT_ASSIGNED and rely on metadata to contain
self-referential NSIDs (expected, since the value is not useful).
Quite the opposite, as already mentioned, there are few applications
that rely on NSID to not be present in local events.
Since the value is not useful and actively harmful in some cases,
let's not report it for local events, making the notifications more
consistent.
Also adding some blank lines for readability.
Fixes: 59324cf35a ("netlink: allow to listen "all" netns")
Reported-by: Matteo Perin <matteo.perin@canonical.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://patch.msgid.link/20260520172317.175168-3-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the current skb is not shared, it is re-used directly for all the
sockets subscribed to the notification. If we have remote all-nsid
socket receiving a message first, then the 'nsid_is_set' will be
set to 'true'. If the nsid is NOT_ASSIGNED for the next socket in
the list, the 'nsid_is_set' will remain 'true' and the negative value
is be delivered to the user space. All subsequent nsid values will be
delivered as well, since there is no code path that sets the flag
back to 'false'.
Fix that by always dropping the flag to 'false' first.
Fixes: 7212462fa6 ("netlink: don't send unknown nsid")
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://patch.msgid.link/20260520172317.175168-2-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vsock_poll() reads vsk->peer_shutdown before taking the socket lock
to set EPOLLHUP and EPOLLRDHUP, then reads it again after taking
the lock to report EOF readability. A shutdown packet can update
peer_shutdown while poll is waiting for the lock, so one poll invocation
can report EOF readability without the corresponding HUP/RDHUP bits.
For connectible sockets, take one peer_shutdown snapshot after
lock_sock() and use it for all peer-shutdown-derived poll bits. For
datagram sockets, which do not take lock_sock() in poll(), take one
lockless READ_ONCE() snapshot and pair it with WRITE_ONCE() on the
writer side.
This keeps the peer-shutdown-derived bits internally consistent for each
poll pass.
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Signed-off-by: Ziyu Zhang <ziyuzhang201@gmail.com>
Link: https://patch.msgid.link/20260519165636.62542-1-ziyuzhang201@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert TIPC sockets (msg, packet, stream proto_ops) to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *sopt
- Use sopt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of put_user()/copy_to_user()
The sockopt_t parameter is named sopt to avoid collision with the
existing optname parameter named opt.
Note: Dropped the unnecessary parentheses to make checkpatch happier.
Also dropped two now-stale comments that referred to the old "res"
variable handling.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260520-getsock_four-v3-6-b8c0b16b7780@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert RxRPC socket's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of put_user()/copy_to_user()
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260520-getsock_four-v3-5-b8c0b16b7780@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert PPPoL2TP socket's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of put_user()/copy_to_user()
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260520-getsock_four-v3-4-b8c0b16b7780@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert XDP socket's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of put_user()/copy_to_user()
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260520-getsock_four-v3-3-b8c0b16b7780@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the ATM SVC and PVC sockets, along with the shared
vcc_getsockopt() helper, to use the new getsockopt_iter callback with
sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input)
- Use copy_to_iter() instead of put_user()/copy_to_user()
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260520-getsock_four-v3-2-b8c0b16b7780@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert IUCV socket's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of put_user()/copy_to_user()
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260520-getsock_four-v3-1-b8c0b16b7780@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For lshift and rshift, the shift operations are performed in a loop over
32-bit words. The loop calculates the shifted value and write it to dst,
and then immediately reads from src to calculate the carry for the next
iteration. Because src and dst could point to the same memory location,
the carry is incorrectly calculated using the newly modified dst value
instead of the original src value.
Adding a temporary local variable to cache the original value before
writing to dst and using it for the carry calculation solves the
problem. In addition, partial overlap is rejected from control plane for
all kind of operations including byteorder. This was tested with the
following bytecode:
table test_table ip flags 0 use 1 handle 1
ip test_table test_chain use 3 type filter hook input prio 0 policy accept packets 0 bytes 0 flags 1
ip test_table test_chain 2
[ immediate reg 1 0x44332211 0x88776655 ]
[ bitwise reg 1 = ( reg 1 << 0x08000000 ) ]
[ cmp eq reg 1 0x66443322 0x00887766 ]
[ counter pkts 0 bytes 0 ]
ip test_table test_chain 4 3
[ immediate reg 1 0x44332211 0x88776655 ]
[ bitwise reg 1 = ( reg 1 << 0x08000000 ) ]
[ cmp eq reg 1 0x55443322 0x00887766 ]
[ counter pkts 21794 bytes 1917798 ]
Fixes: 567d746b55 ("netfilter: bitwise: add support for shifts.")
Acked-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
nft_fib6_info_nh_uses_dev() runs from nft_fib6_eval() in softirq under
rcu_read_lock(). fib6_siblings is modified by writers that hold
tb6_lock but do not wait for RCU readers, so the sibling walk should
use list_for_each_entry_rcu(): it adds READ_ONCE() on the ->next
pointer and lets CONFIG_PROVE_RCU_LIST validate the locking.
No functional change for non-debug builds.
Fixes: 1c32b24c23 ("netfilter: nft_fib_ipv6: switch to fib6_lookup")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Florian Westphal <fw@strlen.de>
Luxiao Xu says:
The function compat_mtw_from_user() converts ebtables extensions from
32-bit user structures to kernel native structures. However, it lacks
proper validation of the user-supplied match_size/target_size.
When certain extensions are processed, the kernel-side translation
logic may perform memory accesses based on the extension's expected
size. If the user provides a size smaller than what the extension
requires, it results in an out-of-bounds read as reported by KASAN.
This fix introduces a check to ensure match_size is at least as large
as the extension's required compatsize. This covers matches, watchers,
and targets, while maintaining compatibility with standard targets.
AFAIU this is relevant for matches that need to go though
match->compat_from_user() call. Those that use plain memcpy with the
user-provided size are ok because the caller checks that size vs the
start of the next rule entry offset (which itself is checked vs. total
size copied from userspace).
The ->compat_from_user() callbacks assume they can read compatsize bytes,
so they need this extra check.
Based on an earlier patch from Luxiao Xu.
Fixes: 81e675c227 ("netfilter: ebtables: add CONFIG_COMPAT support")
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Luxiao Xu <rakukuip@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Several parts of network stack rely on iph->ihl validation
done by network stack before PRE_ROUTING.
Disable this feature for user namespaces for now.
tcp option handling is likely safe even for LOCAL_IN, so this
this leaves tcp option mangling via nft_exthdr.c as-is.
I don't think these are the only means to alter packets, but these
appear to be relatively prominent.
This could be relaxed later. Example:
- allow userns for ingress hook.
- allow userns if base is transport header.
Also, we should revalidate or restrict generally:
- Don't allow linklayer writes to spill into network header
- restrict ipv4 and ipv6 to 'known safe' writes, e.g.
saddr/daddr/check/tos
Reported-by: Qi Tang <tpluszz77@gmail.com>
Reported-by: Tong Liu <lyutoon@gmail.com>
Tested-by: Qi Tang <tpluszz77@gmail.com>
Link: https://lore.kernel.org/netfilter-devel/20260515100411.3141-1-fw@strlen.de/
Signed-off-by: Florian Westphal <fw@strlen.de>
With PREEMPT_RCU we get splat:
BUG: using smp_processor_id() in preemptible [..]
caller is cpu_mt+0x53/0xd0 net/netfilter/xt_cpu.c:37
CPU: 1 .. Comm: syz.3.1377 #0 PREEMPT(full)
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
check_preemption_disabled+0xd3/0xe0 lib/smp_processor_id.c:47
cpu_mt+0x53/0xd0 net/netfilter/xt_cpu.c:37
[..]
Just use raw version instead.
This is similar to 14d14a5d29 ("netfilter: nft_meta: use raw_smp_processor_id()").
Fixes: 0ca743a559 ("netfilter: nf_tables: add compatibility layer for x_tables")
Reported-by: syzbot+690d3e3ffa7335ac10eb@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Quoting reporter:
A race between GRE keymap insertion and destruction can corrupt the
kernel list or use a freed object. `nf_ct_gre_keymap_add()` publishes a
new keymap pointer before the embedded `list_head` is linked, while
`nf_ct_gre_keymap_destroy()` can concurrently delete and free that
same object. An unprivileged user can reach this through the PPTP
conntrack helper by racing PPTP control messages or helper teardown,
leading to KASAN-detectable list corruption/UAF in kernel context.
## Root Cause Analysis
`exp_gre()` installs GRE expectations for a PPTP control flow and then
adds two GRE keymap entries [..]
The add path publishes `ct_pptp_info->keymap[dir]` before linking the
embedded list node [..]
Concurrent teardown deletes that partially initialized object.
Make add/destroy symmetric: install both, destroy both while under lock.
Furthermore, we should refuse to publish a new mapping in case ct is going
away, else we may leak the allocation.
The "retrans" detection is strange: existing mapping is checked for key
equality with the new mapping, then for "is on the list" via list walk.
But I can't see how an existing keymap entry can be NOT on list.
Change this to only check if we're asked to map same tuple again -- if so,
skip re-install, else signal failure.
Last, add a bug trap for the keymap list; it has to be empty when namespace
is going away.
Reported-by: Leo Lin <leo@depthfirst.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
synproxy_tstamp_adjust() rewrites the TCP timestamp option in place
and then patches the TCP checksum via inet_proto_csum_replace4() on
the caller-supplied tcphdr pointer. Both ipv4_synproxy_hook() and
ipv6_synproxy_hook() obtain that pointer with skb_header_pointer()
before calling in, so it may either alias skb->head directly or
point at the caller's on-stack _tcph buffer.
Between obtaining the pointer and using it, the function calls
skb_ensure_writable(skb, optend), which on a cloned or non-linear
skb invokes pskb_expand_head() and frees the old skb->head. After
that point the cached th is stale:
caller (ipv[46]_synproxy_hook)
th = skb_header_pointer(skb, ..., &_tcph)
synproxy_tstamp_adjust(skb, protoff, th, ...)
skb_ensure_writable(skb, optend)
pskb_expand_head() /* kfree(old skb->head) */
...
inet_proto_csum_replace4(&th->check, ...)
/* writes into freed head, or
into the caller's stack copy
leaving the on-wire checksum
stale */
The option bytes are written through skb->data and are fine; only
the checksum update goes through th and so lands in the wrong
place. The result is either a write into freed slab memory or a
packet leaving with a checksum that does not match its payload.
Fix by re-deriving th from skb->data + protoff immediately after
skb_ensure_writable() succeeds, so the subsequent checksum update
targets the linear, writable header.
Fixes: 48b1de4c11 ("netfilter: add SYNPROXY core/target")
Assisted-by: kres (claude-opus-4-7)
Signed-off-by: Chris Mason <clm@meta.com>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
An unintended behavior in the TCP conntrack state machine allows a
connection to be forced into the CLOSE state using an RST packet with an
invalid sequence number.
Specifically, after a SYN packet is observed, an RST with an invalid SEQ
can transition the conntrack entry to TCP_CONNTRACK_CLOSE, regardless of
whether the RST corresponds to the expected reply direction. The relevant
code path assumes the RST is a response to an outgoing SYN, but does not
validate packet direction or ensure that a matching SYN was actually sent
in the opposite direction.
As a result, a crafted packet sequence consisting of a SYN followed by an
invalid-sequence RST can prematurely terminate an active NAT entry. This
makes connection teardown easier than intended.
So, tighten the state transition logic to ensure that RST-triggered
CLOSE transitions only occur when the RST is a valid response to a
previously observed SYN in the correct direction.
Cc: stable@vger.kernel.org
Fixes: 9fb9cbb108 ("[NETFILTER]: Add nf_conntrack subsystem.")
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
The ESP out-of-place fast path appends the trailer in esp_output_head()
before esp_output_tail() allocates the destination page frag. The
head-side gate currently checks skb->data_len and tailen separately, but
the tail code allocates a single destination frag from the combined
post-trailer skb->data_len.
Reject the page-frag fast path when the combined aligned length exceeds a
page. Otherwise skb_page_frag_refill() may fall back to a single page while
the destination sg still spans the combined skb->data_len.
Restore this combined-length page gate for both IPv4 and IPv6.
Fixes: 5bd8baab08 ("esp: limit skb_page_frag_refill use to a single page")
Cc: stable@vger.kernel.org
Signed-off-by: Lin Ma <malin89@huawei.com>
Signed-off-by: Chenyuan Mi <michenyuan@huawei.com>
Signed-off-by: Jingguo Tan <tanjingguo@huawei.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In esp_output_tail(), when esp->inplace is false, the old skb page frags
are replaced with a new page from the xfrm page_frag cache. The source
scatterlist (sg) is built from the old frags before the replacement, and
esp_ssg_unref() is responsible for releasing the old page references
after the crypto operation completes.
However, if the second skb_to_sgvec() call (which builds the destination
scatterlist from the new page) fails, the code jumps to error_free which
only calls kfree(tmp). The old page frag references captured in the
source scatterlist are never released:
1. sg[] is built from old frags via skb_to_sgvec() (no extra get_page)
2. nr_frags is set to 1 and frag[0] is replaced with the new page
3. Second skb_to_sgvec() fails -> goto error_free
4. kfree(tmp) frees the sg[] memory but old frags are not unref'd
5. kfree_skb() only releases frag[0] (the new page), not the old ones
Fix this by adding a bool parameter to esp_ssg_unref() that, when true,
unconditionally unrefs the source scatterlist frags without checking
req->src and req->dst, since those fields are not yet initialized by
aead_request_set_crypt() at the point of the error. Existing callers
pass false to preserve the original behavior.
The same issue exists in both esp4 and esp6 as the code is identical.
Fixes: cac2661c53 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Alessandro Schino <7991aleschino@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This reverts commit db359fccf2 ("mm: introduce a new page type for page
pool in page type") and a part of 735a309b4b ("net: add net_iov_init()
and use it to initialize ->page_type").
Netpp page_type'ed pages might be used in mapping so as to use @_mapcount.
However, since @page_type and @_mapcount are union'ed in struct page,
these two can't be used at the same time. Revert the commit introducing
page_type for Netpp for now.
The patch will be retried once @page_type and @_mapcount get allowed to be
used at the same time.
The revert also includes removal of @page_type initialization part
introduced by commit 735a309b4b ("net: add net_iov_init() and use it
to initialize ->page_type"), which will be restored on the retry.
Link: https://lore.kernel.org/20260515034701.17027-1-byungchul@sk.com
Fixes: db359fccf2 ("mm: introduce a new page type for page pool in page type")
Signed-off-by: Byungchul Park <byungchul@sk.com>
Reported-by: Dragos Tatulea <dtatulea@nvidia.com>
Closes: https://lore.kernel.org/all/982b9bc1-0a0a-4fc5-8e3a-3672db2b29a1@nvidia.com
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Harry Yoo (Oracle) <harry@kernel.org>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Mark Bloch <mbloch@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Stanislav Fomichev <sdf@fomichev.me>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tariq Toukan <tariqt@nvidia.com>
Cc: Toke Hoiland-Jorgensen <toke@redhat.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- mac80211/hwsim:
- some NAN related things
- MCS/NSS rate issues with S1G
- p54: port SPI version to device-tree
- (a few other random things)
-----BEGIN PGP SIGNATURE-----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=XLqG
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-05-21' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Not much going on here right now:
- mac80211/hwsim:
- some NAN related things
- MCS/NSS rate issues with S1G
- p54: port SPI version to device-tree
- (a few other random things)
* tag 'wireless-next-2026-05-21' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next:
ARM: dts: omap2: add stlc4560 spi-wireless node
p54spi: convert to devicetree
dt-bindings: net: add st,stlc4560/p54spi binding
wifi: mac80211: allow cipher change on NAN_DATA interfaces
wifi: mac80211_hwsim: Do not declare NAN support for Extended Key ID
wifi: cfg80211: add a function to parse UHR DBE
wifi: mac80211: don't call ieee80211_handle_reconfig_failure when not needed
wifi: mac80211: Allow per station GTK for NAN Data interfaces
wifi: mac80211_hwsim: advertise NPCA capability
wifi: mac80211_hwsim: reject NAN on multi-radio wiphys
wifi: plfxlc: use module_usb_driver() macro
wifi: mac80211: don't recalc min def for S1G chan ctx
wifi: mac80211: skip NSS and BW init for S1G sta
wifi: mac80211: check stations are removed before MLD change
wifi: rt2x00: allocate anchor with rt2x00dev
====================
Link: https://patch.msgid.link/20260521153519.380276-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - fix to a fix:
- Bluetooth: btmtk: accept too short WMT FUNC_CTRL events
- vsock/virtio: relax the recently added memory limit a little
Current release - regressions:
- IB/IPoIB: make sure IB drivers always use async set_rx_mode since
some (mlx5) are now required to use it due to locking changes
Previous releases - regressions:
- udp: fix UDP length on last GSO_PARTIAL segment
- af_unix: fix UAF read of tail->len in unix_stream_data_wait()
- tcp: fix stale per-CPU tcp_tw_isn leak enabling ISN prediction
- mlx5e: fix unlocked writing to ICOSQ, breaking AF_XDP
Previous releases - always broken:
- tap: fix stack info leak in tap_ioctl() SIOCGIFHWADDR
- ipv4: raw: reject IP_HDRINCL packets with ihl < 5
- Bluetooth: a lot of locking and concurrency fixes (as always)
- batman-adv (mesh wireless networking): a lot of random fixes
for issues reported by security researchers and Sashiko
- netfilter: same thing, a lot of small security-ish fixes
all over the place, nothing really stands out
Misc:
- bring back the old 3c509 driver, Maciej wants to maintain it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ei7U
-----END PGP SIGNATURE-----
Merge tag 'net-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, wireless and netfilter.
Craziness continues with no end in sight. Even discounting the driver
revert this is a pretty huge PR for standards of the previous era. I'd
speculate - we haven't seen the worst of it, yet. Good news, I guess,
is that so far we haven't seen many (any?) cases of "AI reported a
bug, we fixed it and a real user regressed".
Current release - fix to a fix:
- Bluetooth: btmtk: accept too short WMT FUNC_CTRL events
- vsock/virtio: relax the recently added memory limit a little
Current release - regressions:
- IB/IPoIB: make sure IB drivers always use async set_rx_mode since
some (mlx5) are now required to use it due to locking changes
Previous releases - regressions:
- udp: fix UDP length on last GSO_PARTIAL segment
- af_unix: fix UAF read of tail->len in unix_stream_data_wait()
- tcp: fix stale per-CPU tcp_tw_isn leak enabling ISN prediction
- mlx5e: fix unlocked writing to ICOSQ, breaking AF_XDP
Previous releases - always broken:
- tap: fix stack info leak in tap_ioctl() SIOCGIFHWADDR
- ipv4: raw: reject IP_HDRINCL packets with ihl < 5
- Bluetooth: a lot of locking and concurrency fixes (as always)
- batman-adv (mesh wireless networking): a lot of random fixes for
issues reported by security researchers and Sashiko
- netfilter: same thing, a lot of small security-ish fixes all over
the place, nothing really stands out
Misc:
- bring back the old 3c509 driver, Maciej wants to maintain it"
* tag 'net-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (187 commits)
net: enetc: avoid VF->PF mailbox timeout during SR-IOV teardown
net: enetc: fix init and teardown order to prevent use of unsafe resources
net: enetc: fix unbounded loop and interrupt handling in VF-to-PF messaging
net: enetc: fix DMA write to freed memory in enetc_msg_free_mbx()
net: enetc: fix race condition in VF MAC address configuration
net: enetc: fix TOCTOU race and validate VF MAC address
net: enetc: add ratelimiting to VF mailbox error messages
net: enetc: fix missing error code when pf->vf_state allocation fails
net: enetc: fix incorrect mailbox message status returned to VFs
net: bridge: prevent too big nested attributes in br_fill_linkxstats()
l2tp: use list_del_rcu in l2tp_session_unhash
net: bcmgenet: keep RBUF EEE/PM disabled
ethernet: 3c509: Fix most coding style issues
ethernet: 3c509: Update documentation to match MAINTAINERS
ethernet: 3c509: Add GPL 2.0 SPDX license identifier
ethernet: 3c509: Fix AUI transceiver type selection
Revert "drivers: net: 3com: 3c509: Remove this driver"
tools: ynl: support listening on all nsids
net: gro: don't merge zcopy skbs
pds_core: ensure null-termination for firmware version strings
...
Commit 7b546bd899 ("sunrpc/cache: improve RCU safety in
cache_list walking.") changed the tail of __cache_seq_start()
to unconditionally store
*pos = ((long long)hash << 32) + 1
before returning, dropping a prior "hash >= cd->hash_size"
guard. When the while loop exits because every remaining
bucket was empty, hash equals cd->hash_size, so the stored
*pos is one position past the table's last valid bucket.
seq_read_iter() caches that index in m->index. A subsequent
pread(2) at the same file offset skips traverse() and hands
the stored index back to __cache_seq_start(), which decodes
hash = cd->hash_size and dereferences
cd->hash_table[cd->hash_size] -- one hlist_head past the end
of the kzalloc'd table.
KASAN reports an eight-byte slab-out-of-bounds read at the
tail of the 2048-byte hash_table allocation for the NFSD
export cache (EXPORT_HASHMAX * sizeof(struct hlist_head) ==
256 * 8).
Reject an input hash that is out of range before touching the
hash table. cache_seq_next() already bounds-checks its own
loop; the start routine needs to be symmetric.
Reported-by: syzbot+60cfa08822470bbebe44@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=60cfa08822470bbebe44
Fixes: 7b546bd899 ("sunrpc/cache: improve RCU safety in cache_list walking.")
Reviewed-by: Benjamin Coddington <bcodding@hammerspace.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
- cfg80211/mac80211:
- various security(-ish) fixes
- fix A-MSDU subframe handling
- fix multi-link element parsing
- ath10: avoid sending commands to dead device
- ath11k:
- fix WMI buffer leaks on error conditions
- fix UAF in RX MSDU coalesce path
- allow peer ID 0 on RX path (legal for mobile devices)
- reinitialize shared SRNG pointers on restart
- ath12k:
- fix 20 MHz-only parsing of EHT-MCS map
- iwlwifi:
- fix TSO segmentation explosion
- don't TX to dead device
- fix warning in WoWLAN
- fix TX rates on old devices
- disconnect on beacon loss only if also no other traffic
- fill NULL-ptr deref
- fix STEP_URM hardware access
-----BEGIN PGP SIGNATURE-----
iQIyBAABCgAdFiEEpeA8sTs3M8SN2hR410qiO8sPaAAFAmoPJEkACgkQ10qiO8sP
aACQrw/4vU+lbZNW19OyaJMd4h+44gUW+UGJixOzputQCBc6JGUlRsxgceWq5Ws5
5x2LTOX7S1wcvKm0VuSvkIRP3e9YHcgB60iBtsJ3ozz4RCoCFiSu8Bb2RdkGtRTp
7CKMK9NNuovOJncBzfyANq4ujsGs/58BmGbhXbaZ0ACfLUauesCCUtM7iQZE1k7t
lBqtk8ezkz1L8006w5vR7VR8g4KCCofQTEAOASmx450ZeGAiHMlWVKdMFFHV3zWj
ZDXopvLaMtduLNq9xqGYCRhAIZqOv1axgL7w9RRxsi2gWHv71kLqyz0IzgbFmh1m
ZxUSQ45+MHVYCHxs7HHCcTR5gqQlx47j5Wi3tuLUH8yoSZ8dPeWjmQMvIEswfZql
WNq18o6mcK+L3Yg87+oxiiJ7V/euaM//0+ZGtqhbiB+2FyHZhO42BqALTy7e4swS
kmEl8gCj2lgCbD2AHJQ9VpOJwoNdNuLYoJqg9IiIu/CYqQF80FGO8e6HZXBXsJkL
3KAPQIXkMMMkSjtpTg/GdHDiFqv/7lF8u3FgED7w7M1ZVQYNUc13KiDwPALFV0pu
bBbRktB6lvF6ShW9XrTrmn9lT0iiWHxr5YctWoys4+Ofr5V7PUzxNVDxDuzSVCZ0
apLYZ7uwSXO37q99p/azs47dzYp7tpnwKd4rpQuUTl/9bYErUA==
=vzwG
-----END PGP SIGNATURE-----
Merge tag 'wireless-2026-05-21' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Quite a few more updates:
- cfg80211/mac80211:
- various security(-ish) fixes
- fix A-MSDU subframe handling
- fix multi-link element parsing
- ath10: avoid sending commands to dead device
- ath11k:
- fix WMI buffer leaks on error conditions
- fix UAF in RX MSDU coalesce path
- allow peer ID 0 on RX path (legal for mobile devices)
- reinitialize shared SRNG pointers on restart
- ath12k:
- fix 20 MHz-only parsing of EHT-MCS map
- iwlwifi:
- fix TSO segmentation explosion
- don't TX to dead device
- fix warning in WoWLAN
- fix TX rates on old devices
- disconnect on beacon loss only if also no other traffic
- fill NULL-ptr deref
- fix STEP_URM hardware access
* tag 'wireless-2026-05-21' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (24 commits)
wifi: cfg80211: wext: validate chandef in monitor mode
wifi: mac80211: consume only present negotiated TTLM maps
wifi: wilc1000: fix dma_buffer leak on bus acquire failure
wifi: mac80211: capture fast-RX rate before mesh reuses skb->cb
wifi: mac80211: fix multi-link element inheritance
wifi: mac80211: fix MLE defragmentation
wifi: mac80211: don't override max_amsdu_subframes
wifi: mac80211: bounds-check link_id in ieee80211_ml_epcs
wifi: ath12k: fix EHT TX MCS limitation due to wrong 20 MHz-only parsing
wifi: ath11k: clear shared SRNG pointer state on restart
wifi: ath11k: fix use after free in ath11k_dp_rx_msdu_coalesce()
wifi: ath11k: fix peer resolution on rx path when peer_id=0
wifi: iwlwifi: mld: disconnect only after 6 beacons without Rx
wifi: iwlwifi: mld: don't WARN on WoWLAN suspend w/o BSS vif
wifi: iwlwifi: use correct function to read STEP_URM register
wifi: iwlwifi: mvm: fix driver-set TX rates on old devices
wifi: iwlwifi: mld: don't dereference a pointer before NULL checking it
wifi: iwlwifi: mld: stop TX during firmware restart
wifi: iwlwifi: mld: fix TSO segmentation explosion when AMSDU is disabled
wifi: ath10k: skip WMI and beacon transmission when device is wedged
...
====================
Link: https://patch.msgid.link/20260521152903.374070-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
An unprivileged local user can pin a host CPU indefinitely in
l2tp_session_get_by_ifname() by issuing L2TP_CMD_SESSION_GET on
L2TP_ATTR_IFNAME concurrently with L2TP_CMD_SESSION_CREATE and
L2TP_CMD_SESSION_DELETE on the same tunnel. All three commands take
GENL_UNS_ADMIN_PERM, so CAP_NET_ADMIN in the netns user namespace
suffices; on any host that has l2tp_core loaded the trigger is
reachable from a standard `unshare -Urn` sandbox.
l2tp_session_unhash() removes a session from tunnel->session_list
with list_del_init(), but that list is walked by
l2tp_session_get_by_ifname() with list_for_each_entry_rcu() under
rcu_read_lock_bh(). list_del_init() leaves the deleted entry's
next/prev self-pointing; a reader that has loaded the entry and
then advances pos->list.next reads &session->list, container_of()s
back to the same session, and list_for_each_entry_rcu() never
reaches the list head. The CPU stays in strcmp() inside the
walker, with BH and preemption disabled, so RCU grace periods on
the host stall behind it and the wedged thread cannot be killed
(SIGKILL is delivered on syscall return).
Use list_del_rcu() to match the existing list_add_rcu() in
l2tp_session_register(); the deleted session remains visible to
in-flight walkers with consistent next/prev pointers until
kfree_rcu() in l2tp_session_free() releases it. tunnel->session_list
has exactly one list_del_init() call site; the list_del_init
(&session->clist) at l2tp_core.c:533 operates on the per-collision
list, which is not walked under RCU. list_empty(&session->list) is
not used anywhere in net/l2tp/ after the unhash point, so dropping
the post-delete self-init is safe; the fix has no userspace-visible
behavior change.
Fixes: 89b768ec2d ("l2tp: use rcu list add/del when updating lists")
Cc: stable@vger.kernel.org # 6.11+
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260518183447.64078-1-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
skb_gro_receive() can currently copy frags between the source and GRO
skb, without checking the zerocopy status, and in particular the
SKBFL_MANAGED_FRAG_REFS flag.
When SKBFL_MANAGED_FRAG_REFS is set, the skb doesn't hold a reference
on the pages in shinfo->frags. Appending those frags to another skb's
frags without fixing up the page refcount can lead to UAF.
When either the last skb in the GRO chain (the one we would append
frags to) or the source skb is zerocopy, don't merge the skbs.
Fixes: 753f1ca4e1 ("net: introduce managed frags infrastructure")
Reported-by: Huzaifa Sidhpurwala <huzaifas@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/c3b7f906bbfcbdfd7b4fa9d6c18a438870df85be.1779307748.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reported by Sashiko:
In ipv6_hop_ioam(), the hdr pointer is initialized to point into the
skb's linear data buffer. Later, the code calls skb_ensure_writable(),
which might reallocate the buffer:
if (skb_ensure_writable(skb, optoff + 2 + hdr->opt_len))
goto drop;
/* Trace pointer may have changed */
trace = (struct ioam6_trace_hdr *)(skb_network_header(skb)
+ optoff + sizeof(*hdr));
ioam6_fill_trace_data(skb, ns, trace, true);
ioam6_event(IOAM6_EVENT_TRACE, dev_net(skb->dev),
GFP_ATOMIC, (void *)trace, hdr->opt_len - 2);
If the skb is cloned or lacks sufficient linear headroom,
skb_ensure_writable() will invoke pskb_expand_head(), which reallocates
the skb's data buffer and frees the old one, invalidating pointers to
it. While the code recalculates the trace pointer immediately after the
call to skb_ensure_writable(), it fails to recalculate the hdr pointer.
This patch fixes the above by recalculating the hdr pointer before
passing hdr->opt_len to ioam6_event(), so that we avoid any UaF.
Fixes: f655c78d62 ("net: exthdrs: ioam6: send trace event")
Cc: stable@vger.kernel.org
Signed-off-by: Justin Iurman <justin.iurman@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260520124242.32320-1-justin.iurman@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__netpoll_send_skb() always transmits through np->dev and queues busy
packets on np->dev->npinfo->txq, but it leaves skb->dev unchanged.
Stacked callers such as DSA and macvlan can reach netpoll with skb->dev
still naming the upper device while np->dev is the lower device that
owns the netpoll state.
If the skb has to be deferred, queue_process() later dequeues it from
the lower device's txq but retries it through skb->dev. That can
re-enter the upper ndo_start_xmit path on an already transformed skb,
and if the upper device disappears before the lower txq drains the
workqueue can dereference a stale skb->dev pointer.
The buggy scenario involves two paths, with each column showing the
order within that path:
path A label: netpoll enqueue path path B label: upper-device teardown
1. Stacked xmit calls netpoll 1. Teardown unregisters the upper
with lower np->dev and upper net_device while lower npinfo
skb->dev. stays alive.
2. __netpoll_send_skb() uses 2. netdev_release() runs for the
np->dev->npinfo as the txq upper net_device.
owner.
3. Busy transmit queues the skb 3. The lower txq still owns the
on that lower txq with upper deferred skb.
skb->dev.
4. queue_process() drains the 4. queue_process() dereferences
lower txq and reads skb->dev. that stale upper skb->dev.
Normalize skb->dev to np->dev after loading np->dev from the netpoll
instance, before either the direct transmit path or the fallback enqueue.
This keeps the queued skb in the same device and txq domain as the
netpoll state that owns it.
KASAN report as below:
KASAN slab-use-after-free in queue_process+0x7c/0x480
Workqueue: events queue_process
The buggy address belongs to the object at ffff88810906c000 which belongs
to the cache kmalloc-4k of size 4096
The buggy address is located 168 bytes inside of freed 4096-byte region
[ffff88810906c000, ffff88810906d000)
Read of size 8
Call trace:
dump_stack_lvl+0x73/0xb0 (?:?)
print_report+0xd1/0x620 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x215/0x420 (?:?)
kasan_complete_mode_report_info+0x64/0x200 (?:?)
kasan_report+0xf7/0x130 (?:?)
queue_process+0x7c/0x480 (net/core/netpoll.c:88)
kasan_check_range+0x10c/0x1c0 (?:?)
__kasan_check_read+0x15/0x20 (?:?)
process_one_work+0x8b7/0x1af0 (kernel/workqueue.c:3200)
assign_work+0x170/0x3f0 (?:?)
worker_thread+0x574/0xf10 (?:?)
_raw_spin_unlock_irqrestore+0x4b/0x60 (?:?)
trace_hardirqs_on+0x2a/0x180 (?:?)
kthread+0x2fc/0x3f0 (?:?)
ret_from_fork+0x58b/0x830 (?:?)
__switch_to+0x58e/0xe90 (?:?)
__switch_to_asm+0x39/0x70 (?:?)
ret_from_fork_asm+0x1a/0x30 (?:?)
Freed by task stack:
kasan_save_stack+0x3d/0x60 (?:?)
kasan_save_track+0x18/0x40 (?:?)
kasan_save_free_info+0x3f/0x60 (?:?)
__kasan_slab_free+0x48/0x70 (?:?)
kfree+0x20e/0x4e0 (?:?)
kvfree+0x31/0x40 (?:?)
netdev_release+0x71/0x90 (net/core/net-sysfs.c:2227)
device_release+0xd2/0x250 (?:?)
kobject_put+0x181/0x4c0 (lib/kobject.c:730)
netdev_run_todo+0x700/0x1000 (net/core/dev.c:11666)
rtnl_dellink+0x396/0xc00 (net/core/rtnetlink.c:3558)
rtnetlink_rcv_msg+0x740/0xc20 (net/core/rtnetlink.c:6897)
netlink_rcv_skb+0x147/0x3a0 (?:?)
rtnetlink_rcv+0x19/0x20 (net/core/rtnetlink.c:7021)
netlink_unicast+0x4d1/0x830 (net/netlink/af_netlink.c:1327)
netlink_sendmsg+0x840/0xe10 (net/netlink/af_netlink.c:1812)
____sys_sendmsg+0x8a7/0xb50 (?:?)
___sys_sendmsg+0x104/0x190 (?:?)
__sys_sendmsg+0x135/0x1d0 (?:?)
__x64_sys_sendmsg+0x7b/0xc0 (?:?)
x64_sys_call+0x205c/0x2130 (?:?)
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?)
Fixes: 5de4a473bd ("netpoll queue cleanup")
Signed-off-by: Zhang Cen <rollkingzzc@gmail.com>
Link: https://patch.msgid.link/20260519104647.3517990-1-rollkingzzc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6_route_init() registers ip6_route_dev_notifier before registering the
IPv6 route BPF iterator target. If bpf_iter_register() fails after the
notifier has been registered, the error path currently jumps to
out_register_late_subsys and unwinds the RTNL handlers and pernet route
state without removing the notifier from the netdevice notifier chain.
This leaves ip6_route_dev_notify() callable after the IPv6 route state it
uses has been torn down. Add a separate unwind label for the BPF iterator
failure path and unregister the netdevice notifier before continuing with
the existing cleanup.
Fixes: 138d0be35b ("net: bpf: Add netlink and ipv6_route bpf_iter targets")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260520030329.1061183-1-dbgh9129@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The networking receive path is usually run from softirq context, but
protocols that take the socket lock may have packets stored in the
backlog and processed later from process context. In that case
release_sock() -> __release_sock() drops the slock with spin_unlock_bh()
and then calls sk->sk_backlog_rcv() with bottom halves enabled.
Typical sk_backlog_rcv handlers process the socket whose backlog is
being drained, so the BH state at entry is irrelevant for the slocks
they touch. pep_do_rcv() is different: when the inbound skb targets an
existing PEP pipe, it forwards the skb to a different *child* socket
via sk_receive_skb(). That helper takes the child slock with
bh_lock_sock_nested(), which is just spin_lock_nested() and assumes BH
is already off. The same child slock therefore ends up acquired with
BH on (process path) and with BH off (softirq path):
process context softirq context
--------------- ---------------
release_sock(listener) __netif_receive_skb()
__release_sock() phonet_rcv()
spin_unlock_bh() __sk_receive_skb(listener)
[BH now ENABLED] [BH already disabled]
sk_backlog_rcv: sk_backlog_rcv:
pep_do_rcv() pep_do_rcv()
sk_receive_skb(child) sk_receive_skb(child)
bh_lock_sock_nested(child) bh_lock_sock_nested(child)
=> SOFTIRQ-ON-W => IN-SOFTIRQ-W
Lockdep flags this as inconsistent lock state, and it can become a real
self-deadlock if a softirq on the same CPU tries to receive to the same
child socket while its slock is held in the BH-enabled path:
WARNING: inconsistent lock state
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
(slock-AF_PHONET/1){+.?.}-{3:3}, at: __sk_receive_skb+0x1cf/0x900
__sk_receive_skb net/core/sock.c:563
sk_receive_skb include/net/sock.h:2022 [inline]
pep_do_rcv net/phonet/pep.c:675
sk_backlog_rcv include/net/sock.h:1190
__release_sock net/core/sock.c:3216
release_sock net/core/sock.c:3815
pep_sock_accept net/phonet/pep.c:879
Wrap the forwarded sk_receive_skb() in local_bh_disable() /
local_bh_enable() so the child slock is always acquired with BH off.
local_bh_disable() nests safely on the softirq path.
Discovered via in-house syzkaller fuzzing; the same root cause also
on the linux-6.1.y syzbot dashboard as extid 44f0626dd6284f02663c.
Reproduced under KASAN + LOCKDEP + PROVE_LOCKING, reproducer:
https://pastebin.com/A3t8xzCR
Fixes: 9641458d3e ("Phonet: Pipe End Point for Phonet Pipes protocol")
Link: https://syzkaller.appspot.com/bug?extid=44f0626dd6284f02663c
Cc: stable@vger.kernel.org
Signed-off-by: Zijing Yin <yzjaurora@gmail.com>
Acked-by: Rémi Denis-Courmont <remi@remlab.net>
Reported-by: syzbot+9f4a135646b66c509935@syzkaller.appspotmail.com
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260519172635.86304-1-yzjaurora@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 059b7dbd20 ("vsock/virtio: fix potential unbounded skb
queue"), virtio_transport_inc_rx_pkt() subtracts per-skb overhead from
buf_alloc when checking whether a new packet fits. This reduces the
effective receive buffer below what the user configured via
SO_VM_SOCKETS_BUFFER_SIZE, causing legitimate data packets to be
silently dropped and applications that rely on the full buffer size
to deadlock.
Also, the reduced space is not communicated to the remote peer, so
its credit calculation accounts more credit than the receiver will
actually accept, causing data loss (there is no retransmission).
With this approach we currently have failures in
tools/testing/vsock/vsock_test.c. Test 18 sometimes fails, while
test 22 always fails in this way:
18 - SOCK_STREAM MSG_ZEROCOPY...hash mismatch
22 - SOCK_STREAM virtio credit update + SO_RCVLOWAT...send failed:
Resource temporarily unavailable
Fix by allowing at most `buf_alloc * 2` as the total budget for payload
plus skb overhead in virtio_transport_inc_rx_pkt(), similar to how
SO_RCVBUF is doubled to reserve space for sk_buff metadata.
This preserves the full buf_alloc for payload under normal operation,
while still bounding the skb queue growth.
With this patch, all tests in tools/testing/vsock/vsock_test.c are
now passing again.
Fixes: 059b7dbd20 ("vsock/virtio: fix potential unbounded skb queue")
Cc: stable@vger.kernel.org
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260518090656.134588-3-sgarzare@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When there is no more space to queue an incoming packet, the packet is
silently dropped. This causes data loss without any notification to
either peer, since there is no retransmission.
Under normal circumstances, this should never happen. However, it could
happen if the other peer doesn't respect the credit, or if the skb
overhead, which we recently began to take into account with commit
059b7dbd20 ("vsock/virtio: fix potential unbounded skb queue"),
is too high.
Fix this by resetting the connection and setting the local socket error
to ENOBUFS when virtio_transport_recv_enqueue() can no longer queue a
packet, so both peers are explicitly notified of the failure rather than
silently losing data.
Fixes: ae6fcfbf5f ("vsock/virtio: discard packets if credit is not respected")
Cc: stable@vger.kernel.org
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260518090656.134588-2-sgarzare@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The NXP NETC switch tag is a proprietary header added to frames after the
source MAC address. The switch tag has 3 types, and each type has 1 ~ 4
subtypes, the details are as follows.
Forward NXP switch tag (Type=0): Represents forwarded frames.
- SubType = 0 - Normal frame processing.
To_Port NXP switch tag (Type=1): Represents frames that are to be sent
to a specific switch port.
- SubType = 0. No request to perform timestamping.
- SubType = 1. Request to perform one-step timestamping.
- SubType = 2. Request to perform two-step timestamping.
- SubType = 3. Request to perform both one-step timestamping and
two-step timestamping.
To_Host NXP switch tag (Type=2): Represents frames redirected or copied
to the switch management port.
- SubType = 0. Received frames redirected or copied to the switch
management port.
- SubType = 1. Received frames redirected or copied to the switch
management port with captured timestamp at the switch port where
the frame was received.
- SubType = 2. Transmit timestamp response (two-step timestamping).
In addition, the length of different type switch tag is different, the
minimum length is 6 bytes, the maximum length is 14 bytes. Currently,
Forward tag, SubType 0 of To_Port tag and Subtype 0 of To_Host tag are
supported. More tags will be supported in the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-10-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Two frag-transfer helpers (__pskb_copy_fclone() and skb_shift()) fail
to propagate the SKBFL_SHARED_FRAG bit in skb_shinfo()->flags when
moving frags from source to destination. __pskb_copy_fclone() defers
the rest of the shinfo metadata to skb_copy_header() after copying
frag descriptors, but that helper only carries over gso_{size,segs,
type} and never touches skb_shinfo()->flags; skb_shift() moves frag
descriptors directly and leaves flags untouched. As a result, the
destination skb keeps a reference to the same externally-owned or
page-cache-backed pages while reporting skb_has_shared_frag() as
false.
The mismatch is harmful in any in-place writer that uses
skb_has_shared_frag() to decide whether shared pages must be detoured
through skb_cow_data(). ESP input is one such writer (esp4.c,
esp6.c), and a single nft 'dup to <local>' rule -- or any other
nf_dup_ipv4() / xt_TEE caller -- is enough to land a pskb_copy()'d
skb in esp_input() with the marker stripped, letting an unprivileged
user write into the page cache of a root-owned read-only file via
authencesn-ESN stray writes.
Set SKBFL_SHARED_FRAG on the destination whenever frag descriptors
were actually moved from the source. skb_copy() and skb_copy_expand()
share skb_copy_header() too but linearize all paged data into freshly
allocated head storage and emerge with nr_frags == 0, so
skb_has_shared_frag() returns false on its own; they need no change.
The same omission exists in skb_gro_receive() and skb_gro_receive_list().
The former moves the incoming skb's frag descriptors into the
accumulator's last sub-skb via two paths (a direct frag-move loop and
the head_frag + memcpy path); the latter chains the incoming skb whole
onto p's frag_list. Downstream skb_segment() reads only
skb_shinfo(p)->flags, and skb_segment_list() reuses each sub-skb's
shinfo as the nskb -- both p and lp must carry the marker.
The same omission also exists in tcp_clone_payload(), which builds an
MTU probe skb by moving frag descriptors from skbs on sk_write_queue
into a freshly allocated nskb. The helper falls into the same family
and warrants the same fix for consistency; no TCP TX-side in-place
writer is currently known to reach a user page through this gap, but
a future consumer depending on the marker would regress silently.
The same omission exists in skb_segment(): the per-iteration flag
merge takes only head_skb's flag, and the inner switch that rebinds
frag_skb to list_skb on head_skb-frags exhaustion does not fold the
new frag_skb's flag into nskb. Fold frag_skb's flag at both sites
so segments drawing frags from frag_list members carry the marker.
Fixes: cef401de7b ("net: fix possible wrong checksum generation")
Fixes: f4c50a4034 ("xfrm: esp: avoid in-place decrypt on shared skb frags")
Suggested-by: Sabrina Dubroca <sd@queasysnail.net>
Suggested-by: Sultan Alsawaf <sultan@kerneltoast.com>
Suggested-by: Ben Hutchings <ben@decadent.org.uk>
Suggested-by: Lin Ma <malin89@huawei.com>
Suggested-by: Jingguo Tan <tanjingguo@huawei.com>
Suggested-by: Aaron Esau <aaron1esau@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Tested-by: Rajat Gupta <rajat.gupta@oss.qualcomm.com>
Link: https://patch.msgid.link/ageeJfJHwgzmKXbh@v4bel
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Blamed commit moved the TIME_WAIT-derived ISN from the skb control
block to a per-CPU variable, assuming the value would always be consumed
by tcp_conn_request() for the same packet that wrote it. That assumption
is violated by multiple drop paths between the producer
(__this_cpu_write(tcp_tw_isn, isn) in tcp_v{4,6}_rcv()) and the consumer
(tcp_conn_request()):
- min_ttl / min_hopcount check
- xfrm policy check
- tcp_inbound_hash() MD5/AO mismatch
- tcp_filter() eBPF/SO_ATTACH_FILTER drop
- th->syn && th->fin discard in tcp_rcv_state_process() TCP_LISTEN
- psp_sk_rx_policy_check() in tcp_v{4,6}_do_rcv()
- tcp_checksum_complete() in tcp_v{4,6}_do_rcv()
- tcp_v{4,6}_cookie_check() returning NULL
When a packet is dropped on any of these paths, tcp_tw_isn is left set.
The next SYN processed on the same CPU then consumes the non zero value in
tcp_conn_request(), receiving a potentially predictable ISN.
This patch moves back tcp_tw_isn to skb->cb[], getting rid of the per-cpu
variable.
Note that tcp_v{4,6}_fill_cb() do not set it.
Very litle impact on overall code size/complexity:
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 2/1 up/down: 8/-15 (-7)
Function old new delta
tcp_v6_rcv 3038 3042 +4
tcp_v4_rcv 3035 3039 +4
tcp_conn_request 2938 2923 -15
Total: Before=24436060, After=24436053, chg -0.00%
Fixes: 41eecbd712 ("tcp: replace TCP_SKB_CB(skb)->tcp_tw_isn with a per-cpu field")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260519084611.2485277-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vmci_transport_recv_connecting_server() returned err = 0 for a peer
RST in its default switch arm:
err = pkt->type == VMCI_TRANSPORT_PACKET_TYPE_RST ? 0 : -EINVAL;
That made vmci_transport_recv_listen() skip vsock_remove_pending(),
leaving the pending socket on the listener's pending_links with
sk_state = TCP_CLOSE while destroy: still dropped the explicit
reference taken before schedule_delayed_work().
One second later vsock_pending_work() observed is_pending=true and
performed full cleanup: vsock_remove_pending() then the two trailing
sock_put(sk) calls -- the first reached refcount 0 and __sk_freed
the socket, and the second wrote into the freed object:
BUG: KASAN: slab-use-after-free in refcount_warn_saturate
Write of size 4 at addr ffff88800b1cac80 by task kworker
Workqueue: events vsock_pending_work
Treat peer RST like any other unexpected packet type (err = -EINVAL).
All destroy: arms now return err < 0, so vmci_transport_recv_listen()
removes pending from pending_links synchronously and
vsock_pending_work() takes the is_pending=false / !rejected branch,
dropping only its own work reference. This also closes the
multi-packet race Sashiko reported on v2: pending is removed from
the list before any subsequent packet can find it.
The pre-existing sk_acceptq_removed() gap on the err < 0 path of
vmci_transport_recv_listen() that Sashiko also noted is not
introduced or changed by this patch.
Tested on lts-6.12.79 with KASAN: 52/100 unpatched -> 0/100 patched.
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Cc: stable@vger.kernel.org
Signed-off-by: Minh Nguyen <minhnguyen.080505@gmail.com>
Acked-by: Bryan Tan <bryan-bt.tan@broadcom.com>
Link: https://patch.msgid.link/20260519102310.237181-1-minhnguyen.080505@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
drr_dump_class_stats() runs without qdisc spinlock held.
Add missing READ_ONCE()/WRITE_ONCE() annotations around cl->deficit.
Fixes: edb09eb17e ("net: sched: do not acquire qdisc spinlock in qdisc/class stats dump")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260519094618.2632073-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It turns out ip_rt_bug() can be called more than expected.
syzbot will still panic (because of panic_on_warn=1), but non debug
kernels will no longer die while repeating stack traces on the console.
Fixes: c378a9c019 ("ipv4: Give backtrace in ip_rt_bug().")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://patch.msgid.link/20260519193248.4018872-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot was able to trigger ip_rt_bug() in a loop, using an IPv4 packet
with a crafted IPOPT_SSRR option:
options: ipv4_options {
options: array[ipv4_option] {
union ipv4_option {
ssrr: ipv4_option_route[IPOPT_SSRR] {
type: const = 0x89 (1 bytes)
length: len = 0x7 (1 bytes)
pointer: int8 = 0xa2 (1 bytes)
data: array[ipv4_addr] {
union ipv4_addr {
broadcast: const = 0xffffffff (4 bytes)
}
}
}
}
Change __icmp_send() to not send ICMP to broadcast/multicast destinations.
Fixes: c378a9c019 ("ipv4: Give backtrace in ip_rt_bug().")
Reported-by: syzbot+c13a57c2639c2c0d03a6@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a0cc169.170a0220.1f6c2d.0004.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260519200836.4141061-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net_devmem_bind_dmabuf() trusts dmabuf->size and sg_dma_len() to be
PAGE_SIZE multiples without checking:
- tx_vec is sized dmabuf->size / PAGE_SIZE, and
net_devmem_get_niov_at() only bounds-checks virt_addr < dmabuf->size
before indexing tx_vec[virt_addr / PAGE_SIZE]. With size =
N*PAGE_SIZE + r (1 <= r < PAGE_SIZE), sendmsg() at iov_base =
N*PAGE_SIZE passes the bound check and reads tx_vec[N] -- one past.
- owner->area.num_niovs = len / PAGE_SIZE while gen_pool_add_owner()
covers the full byte len, so a non-page-multiple non-final sg
desyncs num_niovs from the gen_pool region for every later sg, on
both RX and TX.
dma-buf does not require page-aligned sizes, so the bind path has to
enforce what its own indexing assumes. Reject both with -EINVAL.
The size check is TX-only (only tx_vec is sized off dmabuf->size); the
SG-length check covers both directions.
Fixes: bd61848900 ("net: devmem: Implement TX path")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20260519203530.66310-1-devnexen@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- hci_sync: Fix not setting mask for HCI_EVT_LE_ALL_REMOTE_FEATURES_COMPLETE
- L2CAP: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del()
- ISO: drop ISO_END frames received without prior ISO_START
- MGMT: validate Add Extended Advertising Data length
- bnep: Fix UAF read of dev->name
- btmtk: fix urb->setup_packet leak in error paths
- btintel_pcie: Fix incorrect MAC access programming
- hci_uart: fix UAFs and race conditions in close and init paths
-----BEGIN PGP SIGNATURE-----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=9q+B
-----END PGP SIGNATURE-----
Merge tag 'for-net-2026-05-20' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_sync: Fix not setting mask for HCI_EVT_LE_ALL_REMOTE_FEATURES_COMPLETE
- L2CAP: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del()
- ISO: drop ISO_END frames received without prior ISO_START
- MGMT: validate Add Extended Advertising Data length
- bnep: Fix UAF read of dev->name
- btmtk: fix urb->setup_packet leak in error paths
- btintel_pcie: Fix incorrect MAC access programming
- hci_uart: fix UAFs and race conditions in close and init paths
* tag 'for-net-2026-05-20' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del()
Bluetooth: hci_uart: fix UAFs and race conditions in close and init paths
Bluetooth: MGMT: validate Add Extended Advertising Data length
Bluetooth: btmtk: fix urb->setup_packet leak in error paths
Bluetooth: ISO: drop ISO_END frames received without prior ISO_START
Bluetooth: btintel_pcie: Fix incorrect MAC access programming
Bluetooth: hci_sync: Fix not setting mask for HCI_EVT_LE_ALL_REMOTE_FEATURES_COMPLETE
Bluetooth: bnep: Fix UAF read of dev->name
====================
Link: https://patch.msgid.link/20260520204959.2902497-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk_psock_strp_data_ready() already checks tls_sw_has_ctx_rx() and
defers to psock->saved_data_ready when a TLS RX context is present,
avoiding a conflict with the TLS strparser's ownership of the receive
queue (commit e91de6afa8, "bpf: Fix running sk_skb program types
with ktls").
sk_psock_verdict_data_ready() has no equivalent guard. When a socket
is inserted into a sockmap (BPF_SK_SKB_VERDICT) before TLS RX is
configured, tls_sw_strparser_arm() saves sk_psock_verdict_data_ready
as rx_ctx->saved_data_ready. On data arrival:
tls_data_ready -> tls_strp_data_ready -> tls_rx_msg_ready
-> saved_data_ready() = sk_psock_verdict_data_ready()
-> tcp_read_skb() drains sk_receive_queue via __skb_unlink()
without calling tcp_eat_skb(), so copied_seq is not advanced.
tls_strp_msg_load() then finds tcp_inq() >= full_len (stale), calls
tcp_recv_skb() on the now-empty queue, hits WARN_ON_ONCE(!first), and
returns with rx_ctx->strp.anchor.frag_list pointing at a psock-owned
(potentially freed) skb. tls_decrypt_sg() subsequently walks that
frag_list: use-after-free.
Apply the same fix as sk_psock_strp_data_ready(): if a TLS RX context
is present, call psock->saved_data_ready (sock_def_readable) to wake
recv() waiters and return immediately, leaving the receive queue
untouched. TLS retains sole ownership of the queue and decrypts the
record normally through tls_sw_recvmsg().
Fixes: ef5659280e ("bpf, sockmap: Allow skipping sk_skb parser program")
Signed-off-by: Xingwang Xiang <v3rdant.xiang@gmail.com>
Link: https://patch.msgid.link/20260517145630.20521-2-v3rdant.xiang@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Store the per-DMB connection pointers in the SMCD device allocation
instead of allocating a separate connection array.
This keeps the connection table tied to the SMCD device lifetime and
simplifies the allocation and cleanup paths.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Link: https://patch.msgid.link/20260519005206.628071-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
New rds rdma self tests exposed a hang when tearing down
the ib network configs. This is caused by the shutdown worker
thread sleeping on the wait_event call, which blocks other work
items in the queue. Fix this by changing wait_event to
wait_event timeout, and looping until the wait check succeeds.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-2-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This improves the fix for CVE-2026-43500.
Fix the verification of RESPONSE packets to avoid the problem of
overwriting a RESPONSE packet sent via splice to a local address by
extracting the contents of the UDP packet into a kmalloc'd linear buffer
rather than decrypting the data in place in the sk_buff (which may corrupt
the original buffer).
Fixes: 24481a7f57 ("rxrpc: Fix conn-level packet handling to unshare RESPONSE packets")
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Closes: https://lore.kernel.org/r/afKV2zGR6rrelPC7@v4bel/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: Jiayuan Chen <jiayuan.chen@linux.dev>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://patch.msgid.link/20260515230516.2718212-4-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This improves the fix for CVE-2026-43500.
Fix the pagecache corruption from in-place decryption of a DATA packet
transmitted locally by splice() by getting rid of the packet sharing in the
I/O thread and unconditionally extracting the packet content into a bounce
buffer in which the buffer is decrypted. recvmsg() (or the kernel
equivalent) then copies the data from the bounce buffer to the destination
buffer. The sk_buff then remains unmodified.
This has an additional advantage in that the packet is then arranged in the
buffer with the correct alignment required for the crypto algorithms to
process directly. The performance of the crypto does seem to be a little
faster and, surprisingly, the unencrypted performance doesn't seem to
change much - possibly due to removing complexity from the I/O thread.
Yet another advantage is that the I/O thread doesn't have to copy packets
which would slow down packet distribution, ACK generation, etc..
The buffer belongs to the call and is allocated initially at 2K,
sufficiently large to hold a whole jumbo subpacket, but the buffer will be
increased in size if needed. However, to take this work, MSG_PEEK may
cause a later packet to be decrypted into the buffer, in which case the
earlier one will need re-decrypting for a subsequent recvmsg().
Note that rx_pkt_offset may legitimately see 0 as a valid offset now, so
switch to using USHRT_MAX to indicate an invalid offset.
Note also that I would generally prefer to replace the buffers of the
current sk_buff with a new kmalloc'd buffer of the right size, ditching the
old data and frags as this makes the handling of MSG_PEEK easier and
removes the re-decryption issue, but this looks like quite a complicated
thing to achieve. skb_morph() looks half way to what I want, but I don't
want to have to allocate a new sk_buff.
Fixes: d0d5c0cd1e ("rxrpc: Use skb_unshare() rather than skb_cow_data()")
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Closes: https://lore.kernel.org/r/afKV2zGR6rrelPC7@v4bel/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: Jiayuan Chen <jiayuan.chen@linux.dev>
cc: linux-afs@lists.infradead.org
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://patch.msgid.link/20260515230516.2718212-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change the krb5 crypto library to provide facilities to precheck the length
of the message about to be decrypted or verified.
Fix AF_RXRPC to make use of this to validate DATA packets secured with
RxGK.
Fixes: 9d1d2b5934 ("rxrpc: rxgk: Implement the yfs-rxgk security class (GSSAPI)")
Closes: https://sashiko.dev/#/patchset/20260511160753.607296-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: Simon Horman <horms@kernel.org>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: linux-afs@lists.infradead.org
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://patch.msgid.link/20260515230516.2718212-2-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recent commit changed the semantics from NOT_VALID to VALID.
I didn't realize that the flags are not stored atomically
with the entry in XArray. There's still a race of reader
observing a VALID mark for a slot, getting interrupted,
writer replacing the entry with a different one, reader
continuing, fetching the entry which is now a different
pointer than the pointer for which VALID was meant.
The biggest consequence of this is that we may see a UAF
since net_shaper_rollback() assumed that entries without
VALID can be freed without observing RCU.
Looks like the XArray marks are buying us nothing at this
point. Let's convert the code to an explicit valid field.
The smp_load_acquire() / smp_store_release() barriers are
marginally cleaner.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 93954b40f6 ("net-shapers: implement NL set and delete operations")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260515221325.1685455-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As previously discussed we don't care about making the shaper
state fully RCU-compliant because the hierarchy itself can't
be dumped in one go over Netlink. Let's annotate the reads
and writes to make that clear.
The field-by-field assignments will also be useful for the
next commit which adds explicit "valid" field (which we don't
want to override with the current full struct assignment).
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260515221325.1685455-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Following the cited commit, __udp_gso_segment() writes single MSS length
in the UDP header.
The cited patch doesn't account for the fact that the last segment could
be a GSO skb by itself. This could happen when the size of the packet is
a multiple of MSS, hence the first segment is also the last one (there
is no need for a remainder skb).
When the post-loop segment is a GSO skb, assign the single MSS length in
the UDP header.
Fixes: b10b446ce7 ("udp: gso: Use single MSS length in UDP header for GSO_PARTIAL")
Reported-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Closes: https://lore.kernel.org/all/6c3fb15e-711d-4b8d-b152-e03d9b05293f@linux.dev/
Tested-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20260518062250.3019914-3-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cited commit started using msslen for uh->len, but still uses newlen
to adjust uh->check. Although the checksum is ignored in most cases due
to the hardware offload, __udp_gso_segment attempts to maintain the
correct one. Fix uh->check and adjust it by the right value.
Additionally, after the fix, newlen becomes assigned and unused before
the loop. The code can be simplified a bit if mss adjustment is dropped,
so that newlen becomes equal to msslen before the loop, and msslen can
be also dropped, saving a few lines of code.
This brings us back to one variable, drops an unneeded arithmetic for
mss, and fixes the UDP checksum.
Fixes: b10b446ce7 ("udp: gso: Use single MSS length in UDP header for GSO_PARTIAL")
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20260518062250.3019914-2-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bt_accept_dequeue() unlinks a not-yet-accepted child from the parent
accept queue and release_sock()s it before returning, so the returned
sk has no caller reference and is unlocked.
l2cap_sock_cleanup_listen() walks these children on listening-socket
close. A concurrent HCI disconnect drives hci_rx_work ->
l2cap_conn_del() which runs l2cap_chan_del() + l2cap_sock_kill() and
frees the child sk and its l2cap_chan; cleanup_listen() then uses both:
BUG: KASAN: slab-use-after-free in l2cap_sock_kill
l2cap_sock_kill / l2cap_sock_cleanup_listen / __x64_sys_close
Freed by: l2cap_conn_del -> l2cap_sock_close_cb -> l2cap_sock_kill
This is distinct from the two fixes already in this area: commit
e83f5e24da ("Bluetooth: serialize accept_q access") serialises the
accept_q list/poll and takes temporary refs inside bt_accept_dequeue(),
and CVE-2025-39860 serialises the userspace close()/accept() race by
calling cleanup_listen() under lock_sock() in l2cap_sock_release().
Neither covers l2cap_conn_del() running from hci_rx_work, so this UAF
still reproduces on current bluetooth/master.
Take the reference at the source: bt_accept_dequeue() does sock_hold()
while sk is still locked, before release_sock(); callers sock_put().
cleanup_listen() pins the chan with l2cap_chan_hold_unless_zero() under
a brief child sk lock (serialising vs l2cap_sock_teardown_cb()), drops
it before l2cap_chan_lock(), and skips a duplicate l2cap_sock_kill() on
SOCK_DEAD. conn->lock is not taken here: cleanup_listen() runs under
the parent sk lock and that would invert
conn->lock -> chan->lock -> sk_lock (lockdep).
KASAN/SMP: an unprivileged listen/close vs HCI-disconnect race produced
12 use-after-free reports per run before this change; 0, and no lockdep
report, over 1600+ raced iterations after it on bluetooth/master.
Fixes: 15f02b9105 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Cc: stable@vger.kernel.org
Reported-by: Siwei Zhang <oss@fourdim.xyz>
Reviewed-by: Siwei Zhang <oss@fourdim.xyz>
Signed-off-by: Safa Karakuş <safa.karakus@secunnix.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
MGMT_OP_ADD_EXT_ADV_DATA is registered as a variable-length command,
with MGMT_ADD_EXT_ADV_DATA_SIZE as the fixed header size. The handler
then uses cp->adv_data_len and cp->scan_rsp_len to validate and copy
cp->data, but it never checks that those bytes are part of the mgmt
command payload.
A short command can therefore make add_ext_adv_data() pass an
out-of-bounds pointer into tlv_data_is_valid(). If the bytes beyond
the command buffer are addressable, they can also be copied into the
advertising instance as scan response data, where the caller can read
them back via MGMT_OP_GET_ADV_INSTANCE. The trigger requires
CAP_NET_ADMIN in the initial user namespace; KASAN reports an 8-byte
slab-out-of-bounds read.
Reject commands whose length does not match the fixed header plus both
advertising data lengths before parsing cp->data.
Fixes: 1241057283 ("Bluetooth: Break add adv into two mgmt commands")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
ISO data PDUs carry a packet-boundary flag indicating START, CONT, END
or SINGLE. The ISO_CONT branch of iso_recv() guards against a missing
ISO_START by checking conn->rx_len before touching conn->rx_skb, but
ISO_END does not.
If a peer sends an ISO_END as the first packet on a fresh ISO
connection, conn->rx_skb is still NULL and conn->rx_len is zero, so
skb_put(conn->rx_skb, ...) dereferences NULL and oopses. For BIS,
where receivers sync to a broadcaster without pairing, any broadcaster
on the air can trigger this.
Mirror the ISO_CONT check at the top of ISO_END so a stray end fragment
is logged and dropped instead of crashing the host.
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes not setting the bit for HCI_EVT_LE_ALL_REMOTE_FEATURES_COMPLETE
when extended features bit is set otherwise the controller may not
generate HCI_EVT_LE_ALL_REMOTE_FEATURES_COMPLETE causing
hci_le_read_all_remote_features_sync to timeout waiting for it.
Also remove dead code.
Fixes: a106e50be7 ("Bluetooth: HCI: Add support for LL Extended Feature Set")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bnep_add_connection() needs to keep holding the bnep_session_sem while
reading dev->name (just like bnep_get_connlist() does); otherwise the
bnep_session() thread can concurrently free the net_device, which can for
example be triggered by a concurrent bnep_del_connection().
(This UAF is fairly uninteresting from a security perspective;
calling bnep_add_connection() requires passing a capable(CAP_NET_ADMIN)
check. It also requires completely tearing down a netdev during a fairly
tight race window.)
Cc: stable@vger.kernel.org
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
ieee80211_key_link() rejects pairwise key installation when the
cipher differs from the existing PTK. Per Wi-Fi Aware version 4.0
section 7.4, the ND-TKSA between the same NDI pair shall be updated
when a new NDP requires a stronger cipher suite.
Exempt NL80211_IFTYPE_NAN_DATA from the same-cipher enforcement so
the PTK can be replaced with a different cipher.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260515142736.3188a47a23bf.I5fba3a111ffe054b46928aefa5c2d763fef51d4d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In case reconfiguration of NAN fails, we call
ieee80211_handle_reconfig_failure, that marks all interfaces as not in
the driver.
Then, at the error path of the reconfig, cfg80211_shutdown_all_interfaces
is called to destroy all the interfaces.
If we have any other interface but the NAN one, for example a BSS
station, then when its state (links, stations) will be removed, we
won't tell the driver about this, because we will think that the
interfaces are not in the driver, and then drivers might remain with
dangling pointers to objects like stations and links (at least for
iwlwifi this is the case).
ieee80211_handle_reconfig_failure is meant to be called after we cleaned
up the state in the driver, there is no reason to call it for NAN
reconfiguration failure.
Fix the code to just warn in such a case, as we do in other error paths
in reconfig where it is too complicated to rewind.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260513182548.6a25f3a0a6ec.I83d1f2a7eed20200a78a62757c6b193e3bab892b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The WiFi Aware specification (v4.0) requires that NAN devices that
support security would also support per station GTK. Thus, allow
per station GTK installation to the driver on NAN Data interfaces.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Tested-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
tested: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260513172418.37a8e259e611.I39bb9f3c1a65a8184124f531c18e121dc123d411@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
__ieee80211_recalc_chanctx_min_def() currently does not attempt
to find the min def for S1G widths, meaning the BW will never change.
However, the following call into ieee80211_chan_bw_change() will
lead to a WARN within ieee80211_chan_width_to_rx_bw(). Not only that,
this entire path is geared towards 20MHz based channels, so it doesn't
make sense anyway. For now, return early when calculating the mindef
for S1G channels.
Fixes: d879d4da45 ("wifi: mac80211: clean up initial STA NSS/bandwidth handling")
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260506131925.2088353-3-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently there is no S1G STA bandwidth support throughout mac80211
as existing support is all based on 20MHz widths. With the recent
STA NSS/BW handling rework, S1G associations now hit the new WARN within
ieee80211_chan_width_to_rx_bw() as the chandef is not a 20MHz based
width. For now, skip initialisating link_sta->pub->bandwidth for
S1G chandefs to avoid the WARN though this should at some point be
properly implemented since there are vendors that offer differing
maximum bandwidths.
Additionally, currently all S1G hardware out there is 1SS so rather
then introducing new parsing code which wouldn't be used anyway, just
initialise the NSS related fields to 1 and skip initialising the STA
bandwidth for S1G chandefs within ieee80211_sta_init_nss_bw_capa().
Fixes: d879d4da45 ("wifi: mac80211: clean up initial STA NSS/bandwidth handling")
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260506131925.2088353-2-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If an interface changes to/from MLD, then all stations related
to it must have been removed first. This is just natural since
we go from having links to not (or vice versa), but not doing
so also causes crashes in debugfs since vif changing to/from
MLD removes the entire debugfs for the vif, including stations.
Delete all stations but warn in this case, other code should
be handling it, in effect fail fast rather than doing a double
free or use-after-free in debugfs.
Link: https://patch.msgid.link/20260505151731.3d7cbb8b952c.I4ce7b536e8af26d7b115e82fd733734446cc56a4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211_wext_siwfreq() constructs a channel definition for monitor
mode but passes it to cfg80211_set_monitor_channel() without first
validating it with cfg80211_chandef_valid(). This causes a WARN_ON
in cfg80211_chandef_dfs_required() when it receives an invalid chandef.
Add the missing cfg80211_chandef_valid() check before calling
cfg80211_set_monitor_channel() to return -EINVAL early on invalid
channel definitions, consistent with how other callers handle this.
Reported-by: syzbot+02a1a03b8622d3c7d1c9@syzkaller.appspotmail.com
Signed-off-by: Kartik Nair <contact.kartikn@gmail.com>
Link: https://patch.msgid.link/20260510202437.7857-1-contact.kartikn@gmail.com
[clarify subject]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_tid_to_link_map_size_ok() validates negotiated TTLM elements
against the number of link-map entries indicated by link_map_presence.
ieee80211_parse_neg_ttlm() must consume the same layout.
The parser advanced its cursor for every TID, including TIDs whose
presence bit is clear and therefore have no map bytes in the element.
A sparse map can then make a later present TID read past the validated
element.
The bad bytes land in neg_ttlm->{up,down}link[tid] but are gated by
valid_links before being applied to driver state, so a peer cannot
turn the read into a policy change. Under KUnit + KASAN with an
exact-sized element allocation the OOB read is reported as a
slab-out-of-bounds; whether the same trigger fires under the
production RX path depends on surrounding allocator state.
Advance the cursor only when the current TID has a map present.
Fixes: 8f500fbc6c ("wifi: mac80211: process and save negotiated TID to Link mapping request")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260515151719.1317659-2-michael.bommarito@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_invoke_fast_rx() reads RX status through
IEEE80211_SKB_RXCB(skb), which aliases the same skb->cb storage
that ieee80211_rx_mesh_data() reuses as IEEE80211_TX_INFO. In the
unicast forward path, mesh_data does:
info = IEEE80211_SKB_CB(fwd_skb);
memset(info, 0, sizeof(*info));
on the same skb the caller still names via rx->skb, then either
queues the skb for TX (success) or kfree_skb()'s it (no-route)
before returning RX_QUEUED. The caller's RX_QUEUED arm then
calls sta_stats_encode_rate(status) on memory that is either
zeroed (success path) or freed (no-route path). The latter is
KASAN slab-use-after-free in ieee80211_prepare_and_rx_handle.
Fix by encoding the rate from status before invoking
ieee80211_rx_mesh_data(), so the RX_QUEUED arm consumes a value
captured while status was still backed by valid memory.
Fixes: 3468e1e0c6 ("wifi: mac80211: add mesh fast-rx support")
Cc: stable@vger.kernel.org
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260509043427.60322-2-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When parsing a beacon, mac80211 erroneously inherits any
reconfiguration or EPCS multi-link elements from the outer
elements into the multi-BSSID profile that's requested, if
connected to a non-transmitted BSS, unless that profile
has a non-inheritance element.
This also happens if parsing a multi-BSSID profile that
doesn't have a non-inheritance element.
Fix this by having an empty non-inheritance element so
cfg80211_is_element_inherited() is invoked in these cases
and causes the parser to skip the elements that should
never be inherited.
Fixes: cf36cdef10 ("wifi: mac80211: Add support for parsing Reconfiguration Multi Link element")
Fixes: 24711d60f8 ("wifi: mac80211: Support parsing EPCS ML element")
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20260508091032.92184c0a3f08.I3c43b0b63d2cef8a4ddddaef1c2faaeb1de711ad@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If either reconf or EPCS multi-link element (MLE) is contained in
a non-transmitted profile, the defragmentation routine is called
with a pointer to the defragmented copy, but the original elements.
This is incorrect for two reasons:
- if the original defragmentation was needed, it will not find the
correct data
- if the original frame is at a higher address, the parsing will
potentially overrun the heap data (though given the layout of
the buffers, only into the new defragmentation buffer, and then
it has to stop and fail once that's filled with copied data.
Fix it by tracking the container along with the pointer and in
doing so also unify the two almost identical defragmentation
routines.
Fixes: 4d70e9c548 ("wifi: mac80211: defragment reconfiguration MLE when parsing")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Link: https://patch.msgid.link/20260508091031.8a6c34613178.I4de16ebbce2d27f2f8f98fc49949c7a376c2fe8d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In client mode, the extended capabilities are handled by the kernel
looking at the association frame. When the supplicant installs the keys
it calls sta_apply_parameters and it doesn't include the extended
capabilities since those can't change after association.
As a result, we overrode the max_amsdu_subframes that we set after
association.
Check that the ext_capa coming from the user space is valid before
looking at it. If the ext_capa is NULL, it really means that the
extended capabilities are not changed (as opposed to cleared).
The default value for max_amsdu_subframes is 0, which means there is no
limit. This value is valid and in case the association response frame
does not have extended capabilities, this is the value we should use.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221079
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260513170623.828dbb58c782.Ifd2bfc190c26140e919127adb02ffddd7b551499@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
IEEE80211_MLE_STA_EPCS_CONTROL_LINK_ID is 0x000f, so link_id extracted
from a PRIO_ACCESS ML element PER_STA_PROFILE subelement can be 0..15.
sdata->link[] has IEEE80211_MLD_MAX_NUM_LINKS (15) entries (indices 0..14),
making index 15 out-of-bounds.
A connected WiFi 7 AP can trigger this by sending an EPCS Enable Response
action frame with a PER_STA_PROFILE subelement where link_id = 15. The
unsolicited-notification path (dialog_token = 0) is reachable any time
EPCS is already enabled, without any prior client request.
sdata->link[15] reads into the first word of sdata->activate_links_work
(a wiphy_work whose embedded list_head is non-NULL after INIT_LIST_HEAD),
so the NULL check on the result does not catch the invalid access. The
garbage pointer is then passed to ieee80211_sta_wmm_params(), which
dereferences link->sdata and crashes the kernel.
The same class of bug was fixed for ieee80211_ml_reconfiguration() by
commit 162d331d83 ("wifi: mac80211: bounds-check link_id in
ieee80211_ml_reconfiguration").
Fixes: de86c5f608 ("wifi: mac80211: Add support for EPCS configuration")
Signed-off-by: Alexandru Hossu <hossu.alexandru@gmail.com>
Link: https://patch.msgid.link/20260515102908.1653088-1-hossu.alexandru@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix a typo and a redundant phrase in the block comment above
__sys_accept4(): "thats" -> "that's", and drop the trailing
"to recvmsg" that repeats the recvmsg() reference earlier in
the same sentence.
No functional change.
Signed-off-by: Avinash Duduskar <avinash.duduskar@gmail.com>
Link: https://patch.msgid.link/20260516101109.479042-1-avinash.duduskar@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
unix_stream_data_wait() does skb_peek_tail(&sk->sk_receive_queue) without
holding any lock that prevents SKBs on that queue from being dequeued and
freed.
This has been the case since commit 79f632c71b ("unix/stream: fix
peeking with an offset larger than data in queue").
The first consequence of this is that the pointer comparison
`tail != last` can be false even if `last` semantically refers to an
already-freed SKB while `tail` is a new SKB allocated at the same address;
which can cause unix_stream_data_wait() to wrongly keep blocking after new
data has arrived, but only in a weird scenario where a peeking recv() and
a normal recv() on the same socket are racing, which is probably not a
real problem.
But since commit 2b514574f7 ("net: af_unix: implement splice for stream
af_unix sockets"), `tail` is actually dereferenced, which can cause UAF in
the following race scenario (where test_setup() runs single-threaded,
and afterwards, test_thread1() and test_thread2() run concurrently in
two threads:
```
static int socks[2];
void test_setup(void) {
socketpair(AF_UNIX, SOCK_STREAM, 0, socks);
send(socks[1], "A", 1, 0);
int peekoff = 1;
setsockopt(socks[0], SOL_SOCKET, SO_PEEK_OFF, &peekoff, sizeof(peekoff));
}
void test_thread1(void) {
char dummy;
recv(socks[0], &dummy, 1, MSG_PEEK);
}
void test_thread2(void) {
char dummy;
recv(socks[0], &dummy, 1, 0);
shutdown(socks[1], SHUT_WR);
}
```
when racing like this:
```
thread1 thread2
unix_stream_read_generic
mutex_lock(&u->iolock)
skb_peek(&sk->sk_receive_queue)
skb_peek_next(skb, &sk->sk_receive_queue)
mutex_unlock(&u->iolock)
unix_stream_read_generic
unix_state_lock(sk)
skb_peek(&sk->sk_receive_queue)
unix_state_unlock(sk)
unix_stream_data_wait
unix_state_lock(sk)
tail = skb_peek_tail(&sk->sk_receive_queue)
spin_lock(&sk->sk_receive_queue.lock)
__skb_unlink(skb, &sk->sk_receive_queue)
spin_unlock(&sk->sk_receive_queue.lock)
consume_skb(skb) [frees the SKB]
`tail != last`: false
`tail`: true
`tail->len != last_len` ***UAF***
```
Fix the UAF by removing the read of tail->len; checking tail->len would
only make sense if SKBs in the receive queue of a UNIX socket could grow,
which can no longer happen.
Kuniyuki explained:
> When commit 869e7c6248 ("net: af_unix: implement stream sendpage
> support") added sendpage() support, data could be appended to the last
> skb in the receiver's queue.
>
> That's why we needed to check if the length of the last skb was changed
> while waiting for new data in unix_stream_data_wait().
>
> However, commit a0dbf5f818 ("af_unix: Support MSG_SPLICE_PAGES") and
> commit 57d44a354a ("unix: Convert unix_stream_sendpage() to use
> MSG_SPLICE_PAGES") refactored sendmsg(), and now data is always added
> to a new skb.
That means this fix is not suitable for kernels before 6.5.
Fixes: 2b514574f7 ("net: af_unix: implement splice for stream af_unix sockets")
Cc: stable@vger.kernel.org # 6.5.x
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260518-b4-unix-recv-wait-hotfix-v2-1-83e29ce8ad31@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reported by Sashiko:
The function ipv6_hop_ioam() accesses
__in6_dev_get(skb->dev)->cnf.ioam6_enabled without validating the returned
idev pointer. Because addrconf_ifdown() can concurrently clear dev->ip6_ptr
via RCU, __in6_dev_get() can return NULL during interface teardown, which
could cause a NULL pointer dereference when processing an IOAM Hop-by-Hop
option.
Let's add a check and use SKB_DROP_REASON_IPV6DISABLED accordingly.
Fixes: 9ee11f0fff ("ipv6: ioam: Data plane support for Pre-allocated Trace")
Cc: stable@vger.kernel.org
Signed-off-by: Justin Iurman <justin.iurman@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260517183059.29140-1-justin.iurman@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
htb_dump_class_stats() and htb_offload_aggregate_stats()
call gnet_stats_basic_sync_init(&cl->bstats) which
is wrong on 32bit arches when syncp is cleared.
Make sure to acquire qdisc spinlock and use
_bstats_set() to ease future lockless dumps.
Fixes: 8327158624 ("sch_htb: Stats for offloaded HTB")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Maxim Mikityanskiy <maximmi@mellanox.com>
Cc: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260518090518.629245-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch continues the effort to refactor workqueue APIs, which has begun
with the changes introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The point of the refactoring is to eventually alter the default behavior of
workqueues to become unbound by default so that their workload placement is
optimized by the scheduler.
Before that to happen, workqueue users must be converted to the better named
new workqueues with no intended behaviour changes:
system_wq -> system_percpu_wq
system_unbound_wq -> system_dfl_wq
This way the old obsolete workqueues (system_wq, system_unbound_wq) can be
removed in the future.
Cc: David Ahern <dsahern@kernel.org>
Cc: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260515135143.259669-2-marco.crivellari@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When per-VLAN multicast snooping is enabled, the bridge iterates over
all the bridge ports, disables the per-port multicast context on each
port and enables the per-{port, VLAN} multicast contexts instead. The
reverse happens when per-VLAN multicast snooping is disabled.
When global multicast snooping is enabled, the bridge iterates over all
the bridge ports and enables the per-port multicast context on each
port. The reverse happens when multicast snooping is disabled.
The above scheme can result in a situation where both types of contexts
(per-port and per-{port, VLAN}) are enabled on a single bridge port:
# ip link add name br1 up type bridge mcast_snooping 1 mcast_querier 1 vlan_filtering 1
# ip link add name dummy1 up master br1 type dummy
# ip link set dev br1 type bridge mcast_vlan_snooping 1
# ip link set dev br1 type bridge mcast_snooping 0
# ip link set dev br1 type bridge mcast_snooping 1
This is not intended and it is a problem since the commit cited below.
Prior to this commit, when removing a bridge port,
br_multicast_disable_port() would disable the per-port multicast context
and the per-{port, VLAN} multicast contexts would get disabled when
flushing VLANs.
After this commit, br_multicast_disable_port() only disables the
per-port multicast context if per-VLAN multicast snooping is disabled.
If both types of contexts were enabled on the port when it was removed,
the per-port multicast context would remain enabled when freeing the
bridge port, leading to a use-after-free [1].
Fix by preventing the bridge from enabling / disabling the per-port
multicast contexts when toggling global multicast snooping if per-VLAN
multicast snooping is enabled.
[1]
ODEBUG: free active (active state 0) object: ffff88810f8bda78 object type: timer_list hint: br_ip6_multicast_port_query_expired (net/bridge/br_multicast.c:1927)
WARNING: lib/debugobjects.c:629 at debug_print_object+0x1b1/0x3e0, CPU#5: swapper/5/0
[...]
Call Trace:
<IRQ>
__debug_check_no_obj_freed (lib/debugobjects.c:1116)
kfree (mm/slub.c:2620 mm/slub.c:6250 mm/slub.c:6565)
kobject_cleanup (lib/kobject.c:689)
rcu_do_batch (kernel/rcu/tree.c:2617)
rcu_core (kernel/rcu/tree.c:2869)
handle_softirqs (kernel/softirq.c:622)
__irq_exit_rcu (kernel/softirq.c:656 kernel/softirq.c:496 kernel/softirq.c:735)
irq_exit_rcu (kernel/softirq.c:752)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1061 (discriminator 47) arch/x86/kernel/apic/apic.c:1061 (discriminator 47))
</IRQ>
Fixes: 4b30ae9adb ("net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions")
Reported-by: syzbot+ae231e0552fa77b26ea1@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/87qznowlfs.ffs@tglx/
Reported-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260517121122.188333-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When roaming, the FDB destination port can change without holding the
bridge's hash lock. Therefore, add missing READ_ONCE() annotations in
both RCU readers and readers that hold the lock. In the latter case, the
annotation is not needed in places where the FDB entry was already
validated to be a local entry since such entries cannot roam.
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260517115009.175163-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add __mptcp_subflow_set_rcvbuf() helper to write the subflow sk_rcvbuf,
but also to call the recently added tcp_set_rcvbuf() helper to update
window_clamp. This is needed because the window clap is updated when
scaling_ratio changes, in tcp_measure_rcv_mss(). Until scaling_ratio
changes, the subflow is stuck with the old window clamp which may be
based on a small initial buffer.
Use this new helper in both mptcp_sol_socket_sync_intval() (setsockopt
path) and sync_socket_options() (new subflow creation path).
Note that this patch depends on commit b025461303 ("tcp: update
window_clamp when SO_RCVBUF is set"): it fixes the issue on TCP side,
but the same fix is needed on MPTCP side as well.
Fixes: a2cbb16039 ("tcp: Update window clamping condition")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/619
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260515-net-mptcp-misc-fixes-7-1-rc4-v2-5-701e96419f2f@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If the MPTCP socket fallback to TCP before the MP handshake completion,
the IASN remain 0, and the rcv_wnd_sent field is not explicitly
initialized, just incremented over time with the data transfer.
At disconnect time such value is not cleared. If the next connection falls
back to TCP before the MP handshake completion, the data transfer will
keep incrementing the receive window end sequence starting from the last
value used in the previous connection: the announced window will be
unrelated from the actual receiver buffer size and likely too big.
Address the issue zeroing the field at disconnect time.
Fixes: b29fcfb54c ("mptcp: full disconnect implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260515-net-mptcp-misc-fixes-7-1-rc4-v2-4-701e96419f2f@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When TCP option space is insufficient (e.g., when sending ADD_ADDR with an
IPv6 address and port while tcp_timestamps is enabled), the original code
jumped to out_unlock without clearing the addr_signal flag. This caused
mptcp_pm_add_timer to keep rescheduling indefinitely, not sending ADD_ADDR,
preventing subsequent addresses in the endpoint list from being announced.
Handle this case by clearing the ADD_ADDR signal and skipping the matching
ADD_ADDR retransmission entry. The skip path cancels the matching timer
(with id check) and advances PM state progression, preserving forward
progress to subsequent PM work.
This cancellation is inherently best-effort. A concurrent add_timer
callback may already be running and may acquire pm.lock before the
cancel path updates entry state. In that case, one final ADD_ADDR
transmit attempt can still be executed.
Once the cancel path sets entry->retrans_times to ADD_ADDR_RETRANS_MAX,
the callback-side retrans_times check suppresses further ADD_ADDR
retransmissions.
Note that when an ADD_ADDR is being prepared, a pure-ACK is queued. On
the output side, it means that it is fine to skip non-pure-ACK packets,
when drop_other_suboptions is set: a pure-ACK will be processed soon
after.
Fixes: 00cfd77b90 ("mptcp: retransmit ADD_ADDR when timeout")
Cc: stable@vger.kernel.org
Signed-off-by: Li Xiasong <lixiasong1@huawei.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260515-net-mptcp-misc-fixes-7-1-rc4-v2-2-701e96419f2f@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a packet arrives with map_seq < ack_seq < end_seq, the beginning
of the packet has already been acknowledged but the end contains new
data. Currently the entire packet is dropped as "old data," forcing
the sender to retransmit.
Instead, skip the already-acked bytes by adjusting the skb offset and
enqueue only the new portion. Update bytes_received and ack_seq to
reflect the new data consumed.
A previous attempt at this fix has been sent by Paolo Abeni [1], but had
issues [2]: it also added a zero-window check and changed rcv_wnd_sent
initialization, which caused test regressions. This version addresses
only the partial packet handling without modifying receive window
accounting.
Fixes: ab174ad8ef ("mptcp: move ooo skbs into msk out of order queue.")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/c9b426a4e163aa3c4fe8b80c79f1a610f47ae7d8.1763075056.git.pabeni@redhat.com [1]
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/600 [2]
Signed-off-by: Shardul Bankar <shardul.b@mpiricsoftware.com>
[pabeni@redhat.com: update map]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260515-net-mptcp-misc-fixes-7-1-rc4-v2-1-701e96419f2f@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
BUILD_BUG_ON() is evaluated at compile time. The same three checks
for __HWTSTAMP_TX_CNT, __HWTSTAMP_FILTER_CNT and __HWTSTAMP_FLAG_CNT
are already present earlier in this file (tsconfig_reply_size()).
Repeating them at the start of ethnl_set_tsconfig() does not
strengthen the guarantee; remove the redundant block there and
keep a single occurrence.
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Link: https://patch.msgid.link/20260515032550.138572-1-zhaochenguang@kylinos.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The readdir buffer is sized to msize, so kzalloc() can fail under
fragmentation with a page allocation failure in v9fs_alloc_rdir_buf()
/ v9fs_dir_readdir_dotl().
The buffer is only a response sink and is never pack_sg_list()'d,
so kvzalloc() is safe for all transports, unlike the fcall buffers
fixed in e21d451a82 ("9p: Use kvmalloc for message buffers on
supported transports").
Signed-off-by: Pierre Barre <pierre@barre.sh>
Message-ID: <20260512132032.369281-1-pierre@barre.sh>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
'struct configfs_item_operations' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
25167 9336 256 34759 87c7 net/9p/trans_usbg.o
After:
=====
text data bss dec hex filename
25231 9272 256 34759 87c7 net/9p/trans_usbg.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-ID: <2478bdabd7d169a686879c049f11dc307b5debbd.1778922467.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Without rtnl_lock held, a hardif might be retrieved as primary interface of
a meshif, but then (while operating on this interface) getting decoupled
from the mesh interface. In this case, the meshif still exists but the
pointer from the primary hardif to the meshif is set to NULL.
The mesh_iface must be checked first to be non-NULL before continuing to
send an ARP request using meshif.
Cc: stable@kernel.org
Fixes: 23721387c4 ("batman-adv: add basic bridge loop avoidance code")
Reported-by: Ido Schimmel <idosch@nvidia.com>
Reported-by: syzbot+9fdcc9f05a98a540b816@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=9fdcc9f05a98a540b816
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Only handles packets where the pppoe header length field matches the exact
packet length. Significantly improves rx throughput.
When running NAT traffic through a MediaTek MT7621 devices from a host
behind PPPoE to a host directly connected via ethernet, the TCP throughput
that the device is able to handle improves from ~130 Mbit/s to ~630 Mbit/s,
using fraglist GRO.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Qingfang Deng <qingfang.deng@linux.dev>
Tested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://patch.msgid.link/20260513013400.7467-1-qingfang.deng@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The bla.num_requests is increased when no request_sent was in progress. And
it is decremented in various places (announcement was received, backbone is
purged, periodic work). But the check if the request_sent is actually set
to a specific state and the atomic_dec/_inc are not safe because they are
not atomic (TOCTOU) and multiple such code portions can run concurrently.
At the same time, it is necessary to modify request_sent (state) and
bla.num_requests atomically. Otherwise batadv_bla_send_request() might set
request_sent to 1 and is interrupted. batadv_handle_announce() can then
set request_sent back to 0 and decrement num_requests before
batadv_bla_send_request() incremented it.
The two operations must therefore be locked. And since state (request_sent)
and wait_periods are only accessed inside this lock, they can be converted
to simpler datatypes. And to avoid that the bla.num_requests is touched by
a parallel running context with a valid backbone_gw reference after
batadv_bla_purge_backbone_gw() ran, a third state "stopped" is required to
correctly signal that a backbone_gw is in the state of being cleaned up.
Cc: stable@kernel.org
Fixes: 23721387c4 ("batman-adv: add basic bridge loop avoidance code")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
batadv_bla_purge_backbone_gw() removes stale backbone gateway entries,
but fails to properly handle their associated report_work:
- If report_work is running, the purge must wait for it to finish before
freeing the backbone_gw, otherwise the worker may access freed memory
(e.g. bat_priv).
- If report_work is pending, the purge must cancel it and release the
reference held for that pending work item.
The previous implementation called hlist_for_each_entry_safe() inside a
spin_lock_bh() section, but cancel_work_sync() may sleep and therefore
cannot be called from within a spinlock-protected region.
Restructure the loop to handle one entry per spinlock critical section:
acquire the lock, find the next entry to purge, remove it from the hash
list, then release the lock before calling cancel_work_sync() and
dropping the hash_entry reference. Repeat until no more entries require
purging.
Cc: stable@kernel.org
Fixes: 23721387c4 ("batman-adv: add basic bridge loop avoidance code")
Reviewed-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
When batadv_iv_ogm_schedule_buff() fails to allocate and queue a forward
packet for OGM transmission, the work item that drives periodic OGM
scheduling is never re-armed. This silently halts transmission of the
node's own OGMs on the affected interface — only OGMs from other peers
continue to be aggregated and forwarded.
Fix this by tracking whether batadv_iv_ogm_queue_add() (and transitively
batadv_iv_ogm_aggregate_new()) successfully scheduled a forward packet.
When scheduling fails, batadv_iv_ogm_schedule_buff() falls back to queuing
a dedicated recovery work item (reschedule_work) that fires after one
originator interval and calls batadv_iv_ogm_schedule() again.
Cc: stable@kernel.org
Fixes: c6c8fea297 ("net: Add batman-adv meshing protocol")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
batadv_mcast_purge_orig() removes entries from RCU-protected hlists but
does not wait for an RCU grace period before returning. Concurrent RCU
readers may still accesses references to those entries at the point of
removal. RCU-protected readers trying to operate on entries like
orig->mcast_want_all_ipv6_node will then access already freed memory.
Fix this by moving batadv_mcast_purge_orig() to batadv_orig_node_release(),
just before the call_rcu() invocation. This ensures RCU readers that were
active at purge time have drained before the orig_node memory is reclaimed.
Cc: stable@kernel.org
Fixes: ab49886e3d ("batman-adv: Add IPv4 link-local/IPv6-ll-all-nodes multicast support")
Acked-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Session lookups in tp_list matched only on destination address (and
optionally session ID), leaving role validation to the caller. If two
sessions with the same other_end coexisted (one as sender, one as receiver)
a lookup could silently return the wrong one, causing the caller's role to
bail out early, potentially skipping necessary cleanup.
Move the role check into the lookup functions themselves so the correct
entry is always returned, or none at all. Since batadv_tp_start()
legitimately needs to detect any active session to a destination regardless
of role, introduce a dedicated helper for that case rather than bending the
existing lookup semantics.
Cc: stable@kernel.org
Fixes: 33a3bb4a33 ("batman-adv: throughput meter implementation")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
batadv_tp_sender_shutdown() previously used two separate variables to track
session state: sending (an atomic flag indicating whether the session was
active) and reason (a plain enum storing the stop reason). This introduced
a race window between the two writes: after sending was cleared to 0,
batadv_tp_send() could observe the stopped state and call
batadv_tp_sender_end() before reason was written, causing the wrong stop
reason to be reported to the caller.
Fix this by consolidating both variables into a single atomic send_result,
which holds 0 while the session is running and the stop reason once it
ends.
Cc: stable@kernel.org
Fixes: 33a3bb4a33 ("batman-adv: throughput meter implementation")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
batadv_tvlv_container_ogm_append() builds a TVLV packet section from
the tvlv.container_list. The total size of this section is computed by
batadv_tvlv_container_list_size(), which sums the sizes of all registered
containers.
The return type and accumulator in batadv_tvlv_container_list_size() were
u16. If the accumulated size exceeds U16_MAX, the value wraps around,
causing the subsequent allocation in batadv_tvlv_container_ogm_append()
to be undersized. The memcpy-style copy that follows would then write
beyond the end of the allocated buffer, corrupting kernel memory.
Fix this by widening the return type of batadv_tvlv_container_list_size()
to size_t. In batadv_tvlv_container_ogm_append(), check the computed length
against U16_MAX before proceeding, and bail out as if the allocation had
failed when the limit is exceeded.
Cc: stable@kernel.org
Fixes: ef26157747 ("batman-adv: tvlv - basic infrastructure")
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Reviewed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
batadv_tvlv_container_ogm_append() could fail in two ways: a memory
allocation failure when resizing the packet buffer, or the tvlv data
exceeding U16_MAX bytes. In both cases the function previously returned the
old (now stale) tvlv_value_len rather than signalling an error, causing the
OGM/OGM2 send path to transmit a packet whose TVLV length field no longer
matched the actual buffer contents. And because it also didn't fill in the
new TVLV data, sending either uninitialized or corrupted data on the wire.
All errors in batadv_tvlv_container_ogm_append() must be forwarded to the
caller. And the caller must abort the send of the OGM2. For B.A.T.M.A.N.
IV, it is currently not allowed to abort the send. The non-TVLV part of the
OGM must be queued up instead.
Cc: stable@kernel.org
Fixes: ef26157747 ("batman-adv: tvlv - basic infrastructure")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
When a batadv_hard_iface is disabled, its mesh_iface pointer is set to
NULL. However, batadv_v_ogm_send_meshif() may still dispatch OGMs via
batadv_v_ogm_queue_on_if() for interfaces that have since lost their
mesh_iface association. This results in a NULL pointer dereference when
batadv_v_ogm_queue_on_if() unconditionally calls netdev_priv() on the
now NULL hard_iface->mesh_iface to retrieve the batadv_priv.
It is necessary to ensure that the batadv_v_ogm_queue_on_if() checks that
it is using the same mesh_iface for which batadv_v_ogm_send_meshif() was
called.
Cc: stable@kernel.org
Fixes: 0da0035942 ("batman-adv: OGMv2 - add basic infrastructure")
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Reviewed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
When a netkit virtual device leases queues from a physical NIC, devmem
TX bindings created on the netkit device must still result in the dmabuf
being mapped for dma by the physical device. This patch accomplishes
this by teaching the bind handler to search for the underlying
DMA-capable device by looking it up via leased rx queues. The function
netdev_find_netmem_tx_dev(), used for finding the underlying DMA-capable
device, can be extended to support other non-netkit NETMEM_TX_NO_DMA
devices in the future if needed.
Additionally, this patch extends validate_xmit_unreadable_skb() to
support the netkit case, where the skb is validated twice: once on the
netkit guest device and again on the physical NIC after BPF redirect or
ip forwarding.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260514-tcp-dm-netkit-v5-3-408c59b91e66@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Devices that support netmem TX previously set dev->netmem_tx = true.
This was checked in validate_xmit_unreadable_skb() to drop unreadable
skbs (skbs with dmabuf-backed frags) before they reach drivers that
would mishandle them or devices that would not have the iommu mappings
for them.
A subsequent patch will introduce a third state for virtual devices
that forward unreadable skbs without ever performing DMA on them. To
prepare for that, convert the boolean dev->netmem_tx into an enum:
NETMEM_TX_NONE - no netmem TX support (drop unreadable skbs)
NETMEM_TX_DMA - full support, device does DMA
Update the existing NIC drivers (bnxt, gve, mlx5, fbnic) and the
validators in net/core to use the new enum. No functional change.
Acked-by: Harshitha Ramamurthy <hramamurthy@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260514-tcp-dm-netkit-v5-1-408c59b91e66@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=rsHV
-----END PGP SIGNATURE-----
Merge tag 'nf-26-05-16' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for net:
1) Fix small race windows in nf_ct_helper_log() when accessing helper,
from Florian Westphal.
2) Fix potential infinite loop and race conditions in IPVS caused by
frequent user-triggered service table changes, from Julia Anastasov.
3) Fix a race condition when dumping ipsets for restore,
from Jozsef Kadlecsik.
4) Fix inner transport offset in IPv6 in nft_inner when extension
headers come before the layer 4 transport header, from Yizhou Zhao.
5) Fix incorrect iteration over IPv4 ranges in several hash set types,
from Nan Li.
6) Fix incorrect order when restoring BH in nft_inner_restore_tun_ctx(),
from Florian Westphal.
7) Validate option array from ip6t_hbh checkpath() to fix an off-by-one
access, from Zhengchuan Liang.
8) Fix race condition between ipset list -terse and concurrent updates,
from Jozsef Kadlecisk.
9) Fix race condition when inserting elements into a hash bucket, also
from Jozsef.
10) Annotate access to first free slot in hashtable, from Jozsef Kadlecsik.
11) Ensure sufficient headroom in br_netfilter neigh transmission,
from Lorenzo Bianconi.
12) Hold reference on skb->dev in nfqueue exit path, bridge local input
is speciall since skb->dev != state->indev, allowing for net_device
to go away while packet is sitting in nfqueue. From Haoze Xie.
* tag 'nf-26-05-16' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_queue: hold bridge skb->dev while queued
netfilter: br_netfilter: Reallocate headroom if necessary in neigh_hh_bridge()
netfilter: ipset: annotate "pos" for concurrent readers/writers
netfilter: ipset: Fix data race between add and dump in all hash types
netfilter: ipset: Fix data race between add and list header in all hash types
netfilter: ip6t_hbh: reject oversized option lists
netfilter: nft_inner: release local_lock before re-enabling softirqs
netfilter: ipset: stop hash:* range iteration at end
netfilter: nft_inner: Fix IPv6 inner_thoff desync
netfilter: ipset: fix a potential dump-destroy race
ipvs: avoid possible loop in ip_vs_dst_event on resizing
netfilter: nf_conntrack_helper: fix possible null deref during error log
====================
Link: https://patch.msgid.link/20260516115627.967773-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- fix tp_meter counter underflow during shutdown, by Luxiao Xu
- fix tp_meter tp_vars reference leak in receiver shutdown,
by Sven Eckelmann
- fix various translation table integer handling issues,
by Sven Eckelmann (3 patches)
- fix various translation table counter issues,
by Sven Eckelmann (3 patches)
- fix fragment reassembly length accounting, by Ruide Cao
- clear current gateway during teardown, by Ruijie Li
- handle forward allocation error in DAT, by Sven Eckelmann
- tp_meter: avoid use of uninitialized sender variables in tp_meter,
by Sven Eckelmann
- disallow unicast fragment in fragment, by Sven Eckelmann
- directly shut down tp_meter timer on cleanup, by Sven Eckelmann
-----BEGIN PGP SIGNATURE-----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=C54U
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-pullrequest-20260515' of https://git.open-mesh.org/batadv
Simon Wunderlich says:
====================
Here are various batman-adv bugfixes:
- fix tp_meter counter underflow during shutdown, by Luxiao Xu
- fix tp_meter tp_vars reference leak in receiver shutdown,
by Sven Eckelmann
- fix various translation table integer handling issues,
by Sven Eckelmann (3 patches)
- fix various translation table counter issues,
by Sven Eckelmann (3 patches)
- fix fragment reassembly length accounting, by Ruide Cao
- clear current gateway during teardown, by Ruijie Li
- handle forward allocation error in DAT, by Sven Eckelmann
- tp_meter: avoid use of uninitialized sender variables in tp_meter,
by Sven Eckelmann
- disallow unicast fragment in fragment, by Sven Eckelmann
- directly shut down tp_meter timer on cleanup, by Sven Eckelmann
* tag 'batadv-net-pullrequest-20260515' of https://git.open-mesh.org/batadv:
batman-adv: tp_meter: directly shut down timer on cleanup
batman-adv: frag: disallow unicast fragment in fragment
batman-adv: tp_meter: avoid use of uninit sender vars
batman-adv: dat: handle forward allocation error
batman-adv: clear current gateway during teardown
batman-adv: fix fragment reassembly length accounting
batman-adv: tt: prevent TVLV entry number overflow
batman-adv: tt: avoid empty VLAN responses
batman-adv: tt: fix TOCTOU race for reported vlans
batman-adv: tt: fix negative last_changeset_len
batman-adv: tt: fix negative tt_buff_len
batman-adv: tt: reject oversized local TVLV buffers
batman-adv: tp_meter: fix tp_vars reference leak in receiver shutdown
batman-adv: fix tp_meter counter underflow during shutdown
====================
Link: https://patch.msgid.link/20260515095540.325586-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko reports that it is technically possible that we got the device
reference, but by the time we're linking it to the OVS datapath, it
may be already in the process of being deleted. In this case if the
notifier wins the race for RTNL, it will see that the device is not
yet in the OVS datapath (ovs_netdev_get_vport() will fail in the
dp_device_event()) and will do nothing. Then the ovs_netdev_link()
will take the RTNL and link the unregistering device to OVS datapath.
Eventually, netdev_wait_allrefs_any() will re-broadcast the event and
the device will be properly detached, but it will take at least a
second before that happens, so it's not something we should rely on.
Let's avoid linking the non-registered device in the first place.
Note: As per documentation, RTNL doesn't protect the reg_state, but
it actually does for all the state transitions we care about here,
so it should not be necessary to use READ_ONCE or taking the instance
lock. We can still do that, but we have a few more places even in
this file where the reg_state is accessed without those while under
RTNL, and many more places like this across the kernel code, so it
might make more sense to change all of them in a more centralized
fashion in the future, if necessary.
Fixes: ccb1352e76 ("net: Add Open vSwitch kernel components.")
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20260514184702.2461435-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
aarp_send_ddp() calls atalk_find_dev_addr(dev) in the LocalTalk fast
path without checking for NULL. When the device has no AppleTalk
interface configured (dev->atalk_ptr == NULL), this leads to a NULL
pointer dereference at the at->s_net access.
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:aarp_send_ddp (net/appletalk/aarp.c:552 (discriminator 2))
Call Trace:
<TASK>
atalk_sendmsg (net/appletalk/ddp.c:1715)
__sys_sendto (net/socket.c:2265 (discriminator 1))
__x64_sys_sendto (net/socket.c:2272)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Add a NULL check consistent with the other callers of
atalk_find_dev_addr().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Link: https://patch.msgid.link/20260514123806.3085961-3-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The kernel-doc comment for batadv_skb_is_frag() contained two errors:
* the function description referred to "gain a unicast packet" instead
of "contains unicast fragment".
* the Return section omitted "merged" from "newly skb", leaving the
description grammatically incorrect and inconsistent with the
function description.
Fixes: bc62216dc8 ("batman-adv: frag: disallow unicast fragment in fragment")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
br_pass_frame_up() rewrites skb->dev from the ingress port to the bridge
master before queueing bridge LOCAL_IN packets. NFQUEUE only holds
references on state.in/out and bridge physdevs, so a queued bridge
packet can retain a freed bridge master in skb->dev until reinjection.
When the verdict is reinjected later, br_netif_receive_skb() re-enters
the receive path with skb->dev still pointing at the freed bridge master,
triggering a use-after-free.
Store skb->dev in the queue entry, hold a reference on it for the queue
lifetime, and use the saved device when dropping queued packets during
NETDEV_DOWN handling.
Fixes: ac28634456 ("netfilter: bridge: add nf_afinfo to enable queuing to userspace")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Haoze Xie <royenheart@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The "pos" structure member of struct hbucket stores the first
free slot in the hash bucket of a hash type of set and there
are concurrent readers/writers. Annotate accesses properly.
Fixes: 18f84d41d3 ("netfilter: ipset: Introduce RCU locking in hash:* types")
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When adding a new entry to the next position in the existing hash bucket,
the position index was incremented too early and parallel dump could
read it before the entry was populated with the value. Move the setting
of the position index after populating the entry.
v2: Position counting fixed, noticed by Florian Westphal.
Fixes: 18f84d41d3 ("netfilter: ipset: Introduce RCU locking in hash:* types")
Reported-by: syzbot+786c889f046e8b003ca6@syzkaller.appspotmail.com
Reported-by: syzbot+1da17e4b41d795df059e@syzkaller.appspotmail.com
Reported-by: syzbot+421c5f3ff8e9493084d9@syzkaller.appspotmail.com
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The "ipset list -terse" command is actually a dump operation which
may run parallel with "ipset add" commands, which can trigger an
internal resizing of the hash type of sets just being dumped. However,
dumping just the header part of the set was not protected against
underlying resizing. Fix it by protecting the header dumping part
as well.
Fixes: c4c997839c ("netfilter: ipset: Fix parallel resizing and listing of the same set")
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
struct ip6t_opts stores at most IP6T_OPTS_OPTSNR option descriptors,
but hbh_mt6_check() does not reject larger optsnr values supplied from
userspace.
Validate optsnr in the rule setup path so only match data that fits the
fixed-size opts array can be installed. This follows the existing xtables
pattern of rejecting invalid user-provided counts in checkentry() and
keeps the packet matching path unchanged.
`struct ip6t_opts` has a fixed `opts[IP6T_OPTS_OPTSNR]` array,
where `IP6T_OPTS_OPTSNR` is 16, then off-by-one array access is possible:
[ 137.924693][ T8692] UBSAN: array-index-out-of-bounds in ../net/ipv6/netfilter/ip6t_hbh.c:110:29
[ 137.926167][ T8692] index 16 is out of range for type '__u16 [16]'
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Zhengchuan Liang <zcliangcn@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Quoting sashiko:
In the error path, local_bh_enable() is called before
local_unlock_nested_bh().
Fixes: ba36fada9a ("netfilter: nft_inner: Use nested-BH locking for nft_pcpu_tun_ctx")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The following hash set variants:
hash:ip,mark
hash:ip,port
hash:ip,port,ip
hash:ip,port,net
iterate IPv4 ranges with a 32-bit iterator.
The iterator must stop once the last address in the requested range has
been processed. Advancing it once more can move the traversal state past
the end of the request, so a later retry may continue from an unintended
position.
Handle the iterator increment explicitly at the end of the loop and stop
once the upper bound has been processed. This keeps the existing retry
behaviour intact for valid ranges while preventing traversal from
continuing past the original boundary.
Fixes: 48596a8ddc ("netfilter: ipset: Fix adding an IPv4 range containing more than 2^31 addresses")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Nan Li <tonanli66@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In nft_inner_parse_l2l3(), when processing inner IPv6 packets,
ipv6_find_hdr() correctly computes the transport header offset
traversing all extension headers, but the result is immediately
overwritten with nhoff + sizeof(_ip6h) (40 bytes), which only
accounts for the IPv6 base header. This creates a desync between
inner_thoff (wrong — points to extension header start) and l4proto
(correct — e.g., IPPROTO_TCP), enabling transport header forgery
and potential firewall bypass. This issue affects stable versions
from Linux 6.2.
For comparison, the normal (non-inner) IPv6 path correctly
preserves ipv6_find_hdr()'s result. Removing the incorrect overwrite
ensures that ipv6_find_hdr()'s calculated transport header offset is
preserved, thereby fixing the desynchronization.
Fixes: 3a07327d10 ("netfilter: nft_inner: support for inner tunnel header matching")
Cc: stable@vger.kernel.org
Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn>
Reported-by: Xuewei Feng <fengxw06@126.com>
Reported-by: Qi Li <qli01@tsinghua.edu.cn>
Reported-by: Ke Xu <xuke@tsinghua.edu.cn>
Assisted-by: GLM:5.1 Z.ai
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When dumping sets in order to create the proper order for restore,
the list type of sets dumped last. Therefore internally we run the
dumping loop twice: first with all non-list type of sets and skipping
the list type ones and then secondly for the list type of sets.
Sashiko noticed that there's a potential race between dump and destroy
if in the first loop the last set was a list type of set: its pointer
remains unreferenced and a concurrent destroy can free it.
Fix the issue by resetting the variable holding the pointer.
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Sashiko points out that unprivileged user can frequently
call ip_vs_flush() or ip_vs_del_service() to trigger
svc_table_changes updates that can lead to infinite loop
in ip_vs_dst_event(). This can also happen if the user
triggers frequent table resizing without deleting all
services. We should also consider the possible effects
if the user triggers many NETDEV_DOWN events.
One way to solve it is to hold svc_resize_sem in
ip_vs_dst_event() but this can block the dev notifier
during the whole resizing process.
Instead, use new rw_semaphore svc_replace_sem to protect just
the svc_table replacement which is a short code section.
Then hold svc_replace_sem in ip_vs_dst_event() to serialize
with replacing the svc_table. As result, loop is avoided
as there is no need to repeat the table walking from the
start. By this way changes in svc_table_changes can happen
only when all services are removed and all dev references
dropped which allows us to abort the table walking.
As IP_VS_WORK_SVC_NORESIZE is the flag used to stop the
svc_resize_work under service_mutex, we should check only
this flag often but not while under service_mutex.
To remove the mutex_trylock() for service_mutex in the
second phase where the resizer installs the new table
after rehashing, we will avoid holding the service_mutex
there. As result, the code in configuration context which
is under service_mutex should access ipvs->svc_table under
RCU because it can be replaced at anytime and released
after a RCU grace period. As for ip_vs_zero_all(), it needs
different solution as a table walker which can escape
single RCU read-side critical section: to hold the
svc_replace_sem to prevent table to be replaced.
In ip_vs_status_show() prefer to hold svc_replace_sem
to avoid many loops, just detect if the svc_table is
removed.
Prefer the newly attached table for the u_thresh/l_thresh
checks to know when to grow/shrink while adding or deleting
services because the new table size is based on the latest
parameters.
Link: https://sashiko.dev/#/patchset/20260505001648.360569-1-pablo%40netfilter.org
Fixes: 840aac3d90 ("ipvs: use resizable hash table for services")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reported by sashiko: there is a small race window.
If a helper module is unloaded or a userspace-defined helper is
removed, nf_conntrack_helper_unregister() sets ->helper to NULL.
Handle this safely. This needs a second patch to close related
race during nf_conntrack_helper_unregister().
Fixes: b20ab9cc63 ("netfilter: nf_ct_helper: better logging for dropped packets")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When AH output is offloaded to an asynchronous crypto provider
(hardware accelerators such as AMD CCP, or a forced-async software
shim used for testing), the digest completion fires
ah_output_done() / ah6_output_done() on a workqueue. The egress
skb at that point may have been originated by a TCP listener
sending a SYN-ACK, which sets skb->sk to a request_sock via
skb_set_owner_edemux(); it may also have been originated by an
inet_timewait_sock retransmit. Neither is a full struct sock, and
passing the raw skb->sk to xfrm_output_resume() then forwards a
non-full socket through the rest of the xfrm output chain.
xfrm_output_resume() and its downstream consumers expect a full
sk where they dereference at all. The natural egress path
through ah_output_done() does not crash today because the
consumers that read past sock_common are either gated by
sk_fullsock() or short-circuit on flags that are clear on a fresh
request_sock; an exhaustive walk of the 50 most plausible
consumers under sch_fq, dev_queue_xmit, netfilter, tc-egress and
cgroup-egress BPF found no current unguarded deref. The bug is
still a real type confusion that future consumer changes could
turn into a memory-corruption primitive.
This is the same bug class fixed for ESP in commit 1620c88887
("xfrm: Fix the usage of skb->sk"). Apply the analogous fix to
AH: convert skb->sk to a full socket pointer (or NULL) via
skb_to_full_sk() before handing it to xfrm_output_resume().
The same async AH callbacks were touched recently for an
independent ESN-related ICV layout bug in commit ec54093e6a
("xfrm: ah: account for ESN high bits in async callbacks"); the
sk type-confusion addressed here is orthogonal. This patch is
part of an ongoing audit of the AH callback paths; an ah_output
ihl-validation hardening series is also currently under review on
netdev.
Reproduced under UML + KASAN + lockdep with a forced-async
hmac(sha1) shim that registers at priority 9999 and wraps the
sync in-tree hmac-sha1-lib. With the shim loaded, ah_output_done
runs on every SYN-ACK egress through a transport-mode AH SA and
skb->sk arrives as a request_sock (TCP_NEW_SYN_RECV); after this
patch, xfrm_output_resume() receives the listener (the result of
sk_to_full_sk()) and consumer derefs land on full-sock fields as
intended.
Fixes: 9ab1265d52 ("xfrm: Use actual socket sk instead of skb socket for xfrm_output_resume")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
HSR node-list and node-status generic-netlink operations run under
rcu_read_lock(). They walk hsr->node_db through hsr_get_next_node() and
hsr_get_node_data(), but RTM_DELLINK teardown removes the same node table
with plain list_del() and frees each node immediately.
That lets a generic-netlink reader hold a struct hsr_node pointer across
hsr_dellink(). In a KASAN build, widening the reader window after
hsr_get_next_node() obtains the node reproduces a slab-use-after-free
when the reader copies node->macaddress_A; the freeing stack is
hsr_del_nodes() from hsr_dellink().
Use list_del_rcu() and defer the free through the existing
hsr_free_node_rcu() callback. This matches the lifetime rule used by the
HSR prune paths, which already delete nodes with list_del_rcu() and
call_rcu().
Fixes: b9a1e62740 ("hsr: implement dellink to clean up resources")
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260513233838.3064715-2-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
addrconf_dad_failure() transitions ifp->state from DAD to POSTDAD
via addrconf_dad_end(), which drops ifp->lock on return. The lock
is re-acquired after net_info_ratelimited(). A concurrent
ipv6_del_addr() can take the lock in that window, set ifp->state
to DEAD and run list_del_rcu(&ifp->if_list).
addrconf_dad_failure() then overwrites DEAD with ERRDAD at errdad:
and schedules a new dad_work. The work calls ipv6_del_addr()
again, hitting the already-poisoned list entry:
general protection fault: 0000 [#1] SMP NOPTI
CPU: 4 PID: 217 Comm: kworker/4:1
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:ipv6_del_addr+0xe9/0x280
RAX: dead000000000122
Call Trace:
addrconf_dad_stop+0x113/0x140
addrconf_dad_work+0x28c/0x430
process_one_work+0x1eb/0x3b0
worker_thread+0x4d/0x400
kthread+0x104/0x140
ret_from_fork+0x35/0x40
Fold the addrconf_dad_end() logic into addrconf_dad_failure() under
a single ifp->lock critical section. The STABLE_PRIVACY branch
temporarily drops ifp->lock around address regeneration, so at
lock_errdad: verify the state is still POSTDAD before transitioning
to ERRDAD; bail out otherwise to avoid overwriting a state set by
another path while the lock was released.
Fixes: c15b1ccadb ("ipv6: move DAD and addrconf_verify processing to workqueue")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260513025509.3776405-1-lilinmao@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
htb_dump_class_stats() will soon run locklessly.
(no RTNL, not qdisc spinlock).
Add READ_ONCE()/WRITE_ONCE() annotations on these fields:
- cl->overlimits
- cl->drops
- cl->tokens
- cl->ctokens
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260514095935.3926276-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
htb_dump_class_stats() will soon run locklessly.
(no RTNL, not qdisc spinlock).
Remove cl->xstats and replace it with two fields:
- xstats_lends
- xstats_borrows
Then use READ_ONCE()/WRITE_ONCE() annotations on them, and change
htb_dump_class_stats to use a private struct tc_htb_xstats.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260514095935.3926276-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
htb_dump() runs without holding qdisc spinlock.
Add missing READ_ONCE()/WRITE_ONCE() annotations around
q->overlimits and q->direct_pkts.
Fixes: edb09eb17e ("net: sched: do not acquire qdisc spinlock in qdisc/class stats dump")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260514095935.3926276-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
htb_dump() runs without holding qdisc spinlock.
It is illegal to touch sch->flags with non locked RMW,
as concurrent readers might see intermediate wrong values.
Set TCQ_F_OFFLOADED in control path (htb_init()) instead.
Fixes: d03b195b5a ("sch_htb: Hierarchical QoS hardware offload")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260514095935.3926276-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
llc_conn_ac_inc_npta_value() and llc_conn_ac_inc_tx_win_size()
clamp their counters to the maximum valid 7-bit value via
(u8) ~LLC_2_SEQ_NBR_MODULO. LLC_2_SEQ_NBR_MODULO is defined as
((u8) 128) in include/net/llc_pdu.h, but the (u8) cast does not
prevent integer promotion of the operand of ~: ~128 is computed
as int (0xffffff7f), and the surrounding (u8) cast truncates
back to 0x7f. The result is correct (127), but the implicit
truncation is flagged by sparse:
net/llc/llc_c_ac.c:1008:38: warning: cast truncates bits from
constant value (ffffff7f becomes 7f)
(and three more at lines 1009, 1099, 1100)
Replace the (u8) ~LLC_2_SEQ_NBR_MODULO expression with
LLC_2_SEQ_NBR_MODULO - 1, which evaluates to 127 directly and
silences sparse.
The same ~LLC_2_SEQ_NBR_MODULO pattern also appears in
include/net/llc_pdu.h:148 as part of PDU_GET_NEXT_Vr, but there
the result is immediately &-masked, so the int promotion is
harmless and sparse does not flag it; it is left alone.
This patch is the minimum diff to silence the warning. The
counter-clamp idiom itself could be modernized to
min_t(u8, ..., LLC_2_SEQ_NBR_MODULO - 1), but that is a
separate cleanup left for another patch.
No functional change.
Signed-off-by: Avinash Duduskar <avinash.duduskar@gmail.com>
Link: https://patch.msgid.link/20260513092253.3035961-1-avinash.duduskar@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a large message is fragmented into multiple skbs, the zerocopy
uarg is only allocated and attached to the last skb in the loop.
Non-final skbs carry pinned user pages with no completion tracking,
so the kernel has no way to notify userspace when those pages are safe
to reuse. If the loop breaks early the uarg is never allocated at all,
leaking pinned pages with no completion notification.
Fix this by following the approach used by TCP: allocate the zerocopy
uarg (if not provided by the caller) before the send loop and attach
it to every skb via skb_zcopy_set(), which takes a reference per skb.
Each skb's completion properly decrements the refcount, and the
notification only fires after the last skb is freed.
On failure, if no data was sent, the uarg is cleanly aborted via
net_zcopy_put_abort().
This issue was initially discovered by sashiko while reviewing commit
1cb36e2522 ("vsock/virtio: fix MSG_ZEROCOPY pinned-pages accounting")
but was pre-existing.
Fixes: 581512a6dc ("vsock/virtio: MSG_ZEROCOPY flag support")
Closes: https://sashiko.dev/#/patchset/20260420132051.217589-1-sgarzare%40redhat.com
Reported-by: Maher Azzouzi <maherazz04@gmail.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Link: https://patch.msgid.link/20260514092948.268720-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In hsr_newlink(), a provided but invalid IFLA_HSR_INTERLINK attribute
was silently ignored if __dev_get_by_index() returned NULL. This leads
to incorrect RedBox topology creation without notifying the user.
Fix this by returning -EINVAL and an extack message when the
interlink attribute is present but cannot be resolved.
Reviewed-by: Felix Maurer <fmaurer@redhat.com>
Signed-off-by: Luka Gejak <luka.gejak@linux.dev>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260513182657.20346-3-luka.gejak@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
raw_send_hdrinc() validates that the caller-supplied IPv4 header
fits within the message length:
iphlen = iph->ihl * 4;
err = -EINVAL;
if (iphlen > length)
goto error_free;
if (iphlen >= sizeof(*iph)) {
/* fix up saddr, tot_len, id, csum, transport_header */
}
It does not, however, reject ihl < 5. For such a packet the
"if (iphlen >= sizeof(*iph))" branch is skipped, leaving the
crafted iphdr untouched, but the packet is still handed to
__ip_local_out() and onward. Downstream consumers that read
iph->ihl assume a sane value: net/ipv4/ah4.c:ah_output() in
particular subtracts sizeof(struct iphdr) from top_iph->ihl * 4
and passes the (signed-int-negative, then cast to size_t)
result to memcpy(), producing an OOB access of length close to
SIZE_MAX and a host kernel panic.
An IPv4 header with ihl < 5 is malformed by definition (RFC 791:
"Internet Header Length is the length of the internet header in
32 bit words ... Note that the minimum value for a correct header
is 5."). The kernel should not be willing to inject such a
packet into its own output path.
Reject "iphlen < sizeof(*iph)" alongside the existing
"iphlen > length" check. This matches the principle that locally
constructed packets that re-enter the IP stack must pass the same
basic sanity tests that a foreign packet would be subjected to.
Once this lands, the "if (iphlen >= sizeof(*iph))" wrapper around
the fixup branch becomes redundant; left in place to keep the
patch minimal and backport-friendly. A follow-up can unwrap it.
Note that commit 86f4c90a1c ("ipv4, ipv6: ensure raw socket
message is big enough to hold an IP header") ensures the message
buffer is large enough to hold an iphdr, but does not constrain
the self-reported iph->ihl.
Reachability: the malformed packet source is any caller with
CAP_NET_RAW, including an unprivileged process in a user+net
namespace on a kernel with CONFIG_USER_NS=y. The reproduced AH
crash also requires a matching xfrm AH policy on the outgoing
route; a container granted CAP_NET_ADMIN can install that state
and policy in its netns. Loopback bypasses xfrm_output, so the
trigger uses a real netdev.
Reproduced on UML + KASAN: kernel-mode fault at addr 0x0 with
memcpy_orig at the crash site. Same shape reproduces inside a
rootless Docker container with --cap-add NET_ADMIN on a stock
distro kernel.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/77ec2b5e8111961c2c39883c92e8aa2709039c17.1778614451.git.michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
that could lead to OOM kills in CephFS and a number of miscellaneous
fixes from Raphael and Slava. All but two are marked for stable.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmoHWPETHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi8SVB/9naVkGM41Vb98EDywE0TPOY2uzKUDC
RW6pxTCtfbJbnqB+L3HuahbKYXz44h/WPk5Gl4+jO8FvizUz75CkwwjTLsPpGbpe
lgmSISrNFtWtYUS+9/X0x+I5BHz4EwX9sKclniizQ7Uick6SQWaPNhPvxiwEWpko
DnAv9T/dYP7Z5Y7RBNhAFrNgsOQh5qpjoJvZMmvLrzAoKROaWKEzc6G5FIOaoRRu
XolZ2KNnCD0kdN2r66LZFEIE+DpIwrrJ1M6geLwb9LyQ5pwcyCYKPz3AHAqjpBI1
TYXRl2ocMeciJFO0FeLGqpfGy2wcDxwc/ndWK6T/LWnelEfgm3qFZzqE
=KnhJ
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-7.1-rc4' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"An important patch from Hristo that squashes a folio reference leak
that could lead to OOM kills in CephFS and a number of miscellaneous
fixes from Raphael and Slava.
All but two are marked for stable"
* tag 'ceph-for-7.1-rc4' of https://github.com/ceph/ceph-client:
libceph: Fix potential null-ptr-deref in decode_choose_args()
libceph: handle rbtree insertion error in decode_choose_args()
libceph: Fix potential out-of-bounds access in osdmap_decode()
ceph: put folios not suitable for writeback
ceph: add ceph_has_realms_with_quotas() check to ceph_quota_update_statfs()
libceph: Fix potential out-of-bounds access in __ceph_x_decrypt()
ceph: fix BUG_ON in __ceph_build_xattrs_blob() due to stale blob size
ceph: fix a buffer leak in __ceph_setxattr()
libceph: Fix unnecessarily high ceph_decode_need() for uniform bucket
libceph: Fix potential out-of-bounds access in crush_decode()
Issues reported with v7.1-rc:
- Correctness fix for the new sunrpc cache netlink protocol
Issues that need expedient stable backports:
- Correctness fixes for delegated attributes
- Prevent an infinite loop when revoking layouts
-----BEGIN PGP SIGNATURE-----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=6XME
-----END PGP SIGNATURE-----
Merge tag 'nfsd-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"Fixes for this release:
- Correctness fix for the new sunrpc cache netlink protocol
Marked for stable:
- Correctness fixes for delegated attributes
- Prevent an infinite loop when revoking layouts"
* tag 'nfsd-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Fix infinite loop in layout state revocation
sunrpc: start cache request seqno at 1 to fix netlink GET_REQS
nfsd: update mtime/ctime on COPY in presence of delegated attributes
nfsd: update mtime/ctime on CLONE in presense of delegated attributes
nfsd: fix file change detection in CB_GETATTR
nfsd: fix GET_DIR_DELEGATION when VFS leases are disabled
batadv_tp_sender_cleanup() was calling timer_delete_sync() followed by
timer_delete() to guard against the timer handler re-arming itself between
the two calls. This double-deletion hack relied on the sending status being
set to 0 to suppress re-arming.
Replace both calls with a single timer_shutdown_sync(). This function both
waits for any running timer callback to complete (like timer_delete_sync())
and permanently disarms the timer so it cannot be re-armed afterwards,
making re-arming prevention unconditional and self-documenting.
The re-arming property is also required because otherwise:
1. context 0 (batadv_tp_recv_ack()) checks in
batadv_tp_reset_sender_timer() if sending is still 1 -> it is
2. context 1 changes in batadv_tp_sender_shutdown() sending to 0 and in
this process forces the kthread to stop timer in
batadv_tp_sender_cleanup()
3. context 0 continues in batadv_tp_reset_sender_timer() and rearms the
timer -> but the reference for it is already gone
Cc: stable@kernel.org
Fixes: 33a3bb4a33 ("batman-adv: throughput meter implementation")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
batadv_frag_skb_buffer() is called by batadv_batman_skb_recv() when a
BATADV_UNICAST_FRAG packet is received. Once all fragments are collected
and the packet is reassembled, batadv_recv_frag_packet() calls
batadv_batman_skb_recv() again to process the defragmented payload.
A malicious sender can craft a BATADV_UNICAST_FRAG packet whose reassembled
payload is itself a BATADV_UNICAST_FRAG packet (matryoshka-style nesting).
Each nesting level recurses through batadv_batman_skb_recv() without bound,
growing the kernel stack until it is exhausted.
Since refragmentation or fragments in fragments are not actually allowed,
discard all packets which are still BATADV_UNICAST_FRAG packets after the
defragmentation process.
Cc: stable@kernel.org
Fixes: 610bfc6bc9 ("batman-adv: Receive fragmented packets and merge")
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Reviewed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The sk_err check in tls_rx_rec_wait() consumes the error via
sock_error(), which clears sk_err atomically. When the caller
(tls_sw_recvmsg, tls_sw_splice_read, or tls_sw_read_sock) already
has bytes copied to userspace, it returns those bytes and discards
the error from this call. sk_err is now zero on the socket, so the
next read syscall observes only RCV_SHUTDOWN and reports a clean
EOF instead of the actual error (typically -ECONNRESET).
The race is reachable when tls_read_flush_backlog()'s periodic
sk_flush_backlog() triggers tcp_reset() in the middle of a
multi-record read.
Pass a has_copied flag to tls_rx_rec_wait(). When has_copied is
false, consume sk_err via sock_error() as before. When has_copied
is true, report the error from READ_ONCE() but leave sk_err set:
the caller returns the byte count and discards the err from this
call, and the next read syscall surfaces the preserved sk_err. This
mirrors the tcp_recvmsg() preserve-and-surface pattern.
The decrypt-abort path is unaffected: tls_err_abort() raises
sk_err to EBADMSG after tls_rx_rec_wait() returns, and nothing
on the caller's return path consumes it, so the EBADMSG surfaces
on the next read.
tls_sw_splice_read() passes has_copied=false: it processes
one record per call, so no bytes have been copied within the
function when tls_rx_rec_wait() runs. A reset that arrives
between iterations of splice_direct_to_actor() (the sendfile()
path) is still consumed by sock_error() in the later call, and the
outer loop returns the prior iterations' byte count and drops the
error. tcp_splice_read() exhibits the same pattern at the iteration
boundary; addressing it belongs at the splice_direct_to_actor()
layer and is out of scope here.
Fixes: c46b01839f ("tls: rx: periodically flush socket backlog")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260513125825.205189-1-cel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
skb_try_coalesce() can attach paged frags from @from to @to. If @from
has SKBFL_SHARED_FRAG set, the resulting @to skb can contain the same
externally-owned or page-cache-backed frags, but the shared-frag marker
is currently lost.
That breaks the invariant relied on by later in-place writers. In
particular, ESP input checks skb_has_shared_frag() before deciding
whether an uncloned nonlinear skb can skip skb_cow_data(). If TCP
receive coalescing has moved shared frags into an unmarked skb, ESP can
see skb_has_shared_frag() as false and decrypt in place over page-cache
backed frags.
Propagate SKBFL_SHARED_FRAG when skb_try_coalesce() transfers paged
frags. The tailroom copy path does not need the marker because it copies
bytes into @to's linear data rather than transferring frag descriptors.
Fixes: cef401de7b ("net: fix possible wrong checksum generation")
Fixes: f4c50a4034 ("xfrm: esp: avoid in-place decrypt on shared skb frags")
Signed-off-by: William Bowling <vakzz@zellic.io>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Tested-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://patch.msgid.link/20260513041635.1289541-1-vakzz@zellic.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rds_tcp_set_callbacks() links a new rds_tcp_connection onto
rds_tcp_tc_list under rds_tcp_tc_list_lock. It releases the
lock, then assigns tc->t_sock = sock outside the lock.
rds_tcp_tc_info() and rds6_tcp_tc_info() walk rds_tcp_tc_list
under the same lock. Both dereference tc->t_sock->sk without
a NULL check.
A reader can acquire rds_tcp_tc_list_lock between the writer's
spin_unlock and the t_sock store. It then sees a list entry
whose t_sock is NULL. The dereference of tc->t_sock->sk is a
NULL access.
Move tc->t_sock = sock inside rds_tcp_tc_list_lock, before
list_add_tail. A reader holding the lock then observes the
linkage and the t_sock store together.
The restore path is safe. rds_tcp_restore_callbacks() does
list_del_init inside the lock. The matching tc->t_sock = NULL
after unlink is harmless to readers holding the lock.
Fixes: 70041088e3 ("RDS: Add TCP transport to RDS")
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Maoyi Xie <maoyi.xie@ntu.edu.sg>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260512142807.1855619-1-maoyi.xie@ntu.edu.sg
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recent changes in qdisc_qstats_qlen_backlog() and friends make it safe
to use locklessly.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260513080853.1383975-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
batadv_tp_recv_ack() and batadv_tp_stop() are only valid for tp_vars in the
BATADV_TP_SENDER role. When called with a BATADV_TP_RECEIVER role, it
proceeds to read sender-only members that were never initialized, leading
to undefined behavior.
This can be triggered when a node that is currently acting as a receiver in
an ongoing tp_meter session receives a malicious ACK packet.
Guard against this by checking tp_vars->role immediately after the
lookup and bailing out if it is not BATADV_TP_SENDER, before any of
those members are accessed.
Cc: stable@kernel.org
Fixes: 33a3bb4a33 ("batman-adv: throughput meter implementation")
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Reviewed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
batadv_dat_forward_data() calls pskb_copy_for_clone() to duplicate an skb
for each DHT candidate, but does not check the return value before passing
it to batadv_send_skb_prepare_unicast_4addr(). That function dereferences
the skb unconditionally, so a failed allocation triggers a NULL pointer
dereference.
Skip forwarding to the current DHT candidate on allocation failure.
Cc: stable@kernel.org
Fixes: 785ea11441 ("batman-adv: Distributed ARP Table - create DHT helper functions")
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Reviewed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
batadv_gw_node_free() removes the gateway list entries during mesh teardown,
but it does not clear the currently selected gateway. This leaves stale
gateway state behind across cleanup and can break a later mesh recreation.
Clear bat_priv->gw.curr_gw before walking the gateway list so the selected
gateway reference is dropped as part of teardown.
Fixes: 2265c14108 ("batman-adv: gateway election code refactoring")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Ruijie Li <ruijieli51@gmail.com>
Signed-off-by: Zhanpeng Li <lzhanpeng2025@lzu.edu.cn>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
batman-adv keeps a running payload length for queued fragments and uses it
to validate a fragment chain before reassembly.
That accounting currently allows the accumulated fragment length to be
truncated during updates. As a result, malformed fragment chains can
bypass the intended validation and drive reassembly with inconsistent
length state, leading to a local denial of service.
Fix the accounting by storing the accumulated length in a length-typed
field and rejecting update overflows before the existing validation logic
runs.
The fix was verified against the original reproducer and against valid
fragment reassembly paths.
Fixes: 610bfc6bc9 ("batman-adv: Receive fragmented packets and merge")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Ruide Cao <caoruide123@gmail.com>
Tested-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Commit 1c08108f30 ("Bluetooth: L2CAP: Avoid -Wflex-array-member-not-at-end
warnings") converted the on-stack request PDU in l2cap_ecred_reconfigure()
from an explicit packed struct to DEFINE_RAW_FLEX(), but did not adjust the
size and source-pointer arguments to l2cap_send_cmd():
- struct {
- struct l2cap_ecred_reconf_req req;
- __le16 scid;
- } pdu;
+ DEFINE_RAW_FLEX(struct l2cap_ecred_reconf_req, pdu, scid, 1);
...
l2cap_send_cmd(conn, chan->ident, L2CAP_ECRED_RECONF_REQ,
sizeof(pdu), &pdu);
After the conversion, DEFINE_RAW_FLEX() expands to declare an anonymous
union pdu_u plus a local pointer "pdu" pointing at it. Therefore:
- sizeof(pdu) is now sizeof(struct l2cap_ecred_reconf_req *) = 8 on
64-bit (4 on 32-bit), not the 6 bytes of (mtu, mps, scid[1]).
- &pdu is the address of the local pointer's stack storage, not the
address of the request payload.
l2cap_send_cmd() forwards (data, count) to l2cap_build_cmd(), which calls
skb_put_data(skb, data, count). The L2CAP_ECRED_RECONFIGURE_REQ packet
body therefore contains 8 bytes copied from the kernel stack starting at
&pdu -- the 8 bytes overlap the pdu pointer's value, leaking a kernel
stack address to the paired Bluetooth peer. The intended (mtu, mps, scid)
fields are not transmitted at all, so the peer rejects the request as
malformed and the L2CAP_ECRED_RECONFIGURE feature itself has been broken
for the local-side initiator since the introducing commit landed.
The sibling site l2cap_ecred_conn_req() in the same commit was converted
correctly (sizeof(*pdu) + len, pdu); only this site was missed.
Restore the original semantics: pass the full flex-struct size via
struct_size(pdu, scid, 1) and the pdu pointer (the struct address) as
the source.
Validated on a stock 7.0-based host kernel via the real call path:
setsockopt(SOL_BLUETOOTH, BT_RCVMTU, ...) on a BT_CONNECTED
L2CAP_MODE_EXT_FLOWCTL socket emits an L2CAP_ECRED_RECONFIGURE_REQ
whose body is 8 bytes (the on-stack pdu local's value) rather than
the expected 6. Three captures from fresh socket / fresh hciemu peer
on the same host -- low bytes vary per call, high 0xffff confirms a
kernel virtual address (KASLR-randomised stack slot, not a fixed
string):
RECONF_REQ body (ident=0x02 len=8): 42 fb 54 af 0e ca ff ff
RECONF_REQ body (ident=0x02 len=8): 52 3d 2e af 0e ca ff ff
RECONF_REQ body (ident=0x02 len=8): b2 fc 5b af 0e ca ff ff
After this patch the body is 6 bytes carrying the expected
little-endian (mtu, mps, scid).
Cc: stable@vger.kernel.org
Fixes: 1c08108f30 ("Bluetooth: L2CAP: Avoid -Wflex-array-member-not-at-end warnings")
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bt_sock_poll() walks the accept queue without synchronization, while
child teardown can unlink the same socket and drop its last reference.
The unsynchronized accept queue walk has existed since the initial
Bluetooth import.
Protect accept_q with a dedicated lock for queue updates and polling.
Also rework bt_accept_dequeue() to take temporary child references under
the queue lock before dropping it and locking the child socket.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reported-by: Jann Horn <jannh@google.com>
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Sashiko points out that if end = 0 (start != 0) the current
code will create a chain link to content type right after
the wrap link:
This would create a chain where the wrap link points directly
to another chain link. The scatterlist API sg_next iterator
does not recursively resolve consecutive chain links.
meaning this is illegal input to crypto.
The wrapping link is unnecessary if end = 0. end is the entry after
the last one used so end = 0 means there's nothing pushed after
the wrap:
end start i
v v v
[ ]...[ ][ d ][ d ][ d ][ d ][rsv for wrap]
Skip the wrapping in this case.
TLS 1.3 can use the "wrapping slot" for it's chaining if end = 0.
This avoids the chain-after-chain.
Move the wrap chaining before marking END and chaining off content
type, that feels like more logical ordering to me, but should not
matter from functional perspective.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 9aaaa56845 ("bpf: Sockmap/tls, skmsg can have wrapped skmsg that needs extra chaining")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260511174920.433155-3-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When an sk_msg scatterlist ring wraps (sg.end < sg.start),
tls_push_record() chains the tail portion of the ring to the head
using sg_chain(). An extra entry in the sg array is reserved for
this:
struct sk_msg_sg {
[...]
/* The extra two elements:
* 1) used for chaining the front and sections when the list becomes
* partitioned (e.g. end < start). The crypto APIs require the
* chaining;
* 2) to chain tailer SG entries after the message.
*/
struct scatterlist data[MAX_MSG_FRAGS + 2];
The current code uses MAX_SKB_FRAGS + 1 as the ring size:
sg_chain(&msg_pl->sg.data[msg_pl->sg.start],
MAX_SKB_FRAGS - msg_pl->sg.start + 1,
msg_pl->sg.data);
This places the chain pointer at
sg_chain(data[start], (MAX_SKB_FRAGS - msg_start + 1) .. =
&data[start] + (MAX_SKB_FRAGS - msg_start + 1) - 1 =
data[start + (MAX_SKB_FRAGS - start + 1) - 1] =
data[MAX_SKB_FRAGS]
instead of the true last entry. This is likely due to a "race" of
the commit under Fixes landing close to
commit 031097d9e0 ("bpf: sk_msg, zap ingress queue on psock down")
Convert to ARRAY_SIZE and drop the data[start] / - start (as suggested
by Sabrina).
Reported-by: 钱一铭 <yimingqian591@gmail.com>
Fixes: 9aaaa56845 ("bpf: Sockmap/tls, skmsg can have wrapped skmsg that needs extra chaining")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260511174920.433155-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add netlink handlers for the per-VLAN neigh_forward_grat option via
BRIDGE_VLANDB_ENTRY_NEIGH_FORWARD_GRAT attribute.
The per-VLAN option provides fine-grained control, allowing different
VLANs on the same port to have different gratuitous ARP/unsolicited NA
forwarding behavior.
This enables control via 'bridge' commands:
# bridge vlan set dev eth0 vid 10 neigh_suppress on
# bridge vlan set dev eth0 vid 10 neigh_forward_grat on
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260511065936.4173106-6-danieller@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add netlink handlers for the port-level neigh_forward_grat option via
IFLA_BRPORT_NEIGH_FORWARD_GRAT attribute.
The default value of OFF preserves existing behavior, i.e. gratuitous ARP
and unsolicited NA are suppressed when neigh_suppress is enabled. Users can
explicitly set it to ON to allow these packets through.
Example for enabling control via 'bridge link' command:
# bridge link set dev eth0 neigh_suppress on
# bridge link set dev eth0 neigh_forward_grat on
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260511065936.4173106-5-danieller@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The existing neighbor suppression unconditionally suppresses gratuitous
ARPs and unsolicited Neighbor Advertisements, which prevents fast
mobility of hosts between VTEPs.
Add the neigh_forward_grat option to allow selective control of gratuitous
neighbor announcements. When neigh_suppress is enabled but
neigh_forward_grat is disabled (default), gratuitous announcements are
suppressed. When neigh_forward_grat is enabled, gratuitous announcements
are forwarded while regular neighbor discovery remains suppressed.
The implementation provides per-output-port control by:
1. Adding a 'grat_arp' flag to BR_INPUT_SKB_CB to mark gratuitous ARPs and
unsolicited NAs.
2. Setting both grat_arp and proxyarp_replied flags in
br_do_proxy_suppress_arp() and br_do_suppress_nd() when gratuitous
packets are detected.
3. Checking neigh_forward_grat per output port during flooding:
- For gratuitous ARPs/NAs: suppress unless the output port has
neigh_forward_grat enabled.
- For regular ARPs/NDs: maintain existing behavior.
This allows gratuitous announcements from any input port to be selectively
forwarded based on each output port's individual neigh_forward_grat
setting, enabling gratuitous neighbor announcements to be flooded to the
VXLAN fabric.
Regular neighbor discovery (ARP requests, NS queries, solicited replies)
remains controlled by neigh_suppress and is unaffected.
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260511065936.4173106-4-danieller@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add internal flags for the neigh_forward_grat feature:
- BR_NEIGH_FORWARD_GRAT: Port-level flag
- BR_VLFLAG_NEIGH_FORWARD_GRAT_ENABLED: Per-VLAN flag
These will be used to control whether gratuitous ARP and unsolicited NA
packets are forwarded when neighbor suppression is enabled.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260511065936.4173106-3-danieller@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add netlink attributes for controlling gratuitous ARP and unsolicited NA
forwarding when neighbor suppression is enabled.
Add IFLA_BRPORT_NEIGH_FORWARD_GRAT for port-level control and
BRIDGE_VLANDB_ENTRY_NEIGH_FORWARD_GRAT for per-VLAN control.
The new attributes provide independent control of gratuitous ARP and
unsolicited NA packets. Operators can enable forwarding for those packets
for fast mobility across VTEPs while keeping general neighbor suppression
active.
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260511065936.4173106-2-danieller@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On the SMC-D client, slot 0 of ini->ism_dev[]/ini->ism_chid[] is
reserved for an SMC-Dv1 device. smc_find_ism_v2_device_clnt()
populates V2 entries starting at index 1, so when no V1 device is
selected slot 0 is left in its kzalloc()'ed state with ism_dev[0] ==
NULL and ism_chid[0] == 0.
smc_v2_determine_accepted_chid() then matches the peer's CHID against
the array starting from index 0 using the CHID alone. A malicious
peer replying to a SMC-Dv2-only proposal with d1.chid == 0 matches
the empty slot, ini->ism_selected becomes 0, and the subsequent
ism_dev[0]->lgr_lock dereference in smc_conn_create() faults at
offsetof(struct smcd_dev, lgr_lock) == 0x68:
BUG: KASAN: null-ptr-deref in _raw_spin_lock_bh+0x79/0xe0
Write of size 4 at addr 0000000000000068 by task exploit/144
Call Trace:
_raw_spin_lock_bh
smc_conn_create (net/smc/smc_core.c:1997)
__smc_connect (net/smc/af_smc.c:1447)
smc_connect (net/smc/af_smc.c:1720)
__sys_connect
__x64_sys_connect
do_syscall_64
Require ism_dev[i] to be non-NULL before accepting a CHID match.
Fixes: a7c9c5f4af ("net/smc: CLC accept / confirm V2")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260511062138.2839584-1-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add 64-bit counters for each impairment netem applies (delay, loss,
ECN marking, corruption, duplication, reordering) and for skb
allocation failures during enqueue. Exposed through TCA_STATS_APP
as struct tc_netem_xstats.
Counters increment when an impairment is occurs, independent of later
events that may mask its on-wire effect. Added allocation_errors
(similar to sch_fq) to account for when impairment could not be
applied due to memory pressure, etc.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://patch.msgid.link/20260509171123.307549-6-stephen@networkplumber.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The packet corruption code only flipped bits in the linear
header portion of the skb, skipping corruption when
skb_headlen() was zero.
Linearize the whole skb if necessary before corruption.
Extends d64cb81dcb ("net/sched: sch_netem: fix out-of-bounds access
in packet corruption") with a more general solution.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://patch.msgid.link/20260509171123.307549-5-stephen@networkplumber.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use netlink extack to report errors instead of sending them
to the kernel log with pr_info(). The error message can them be seen
with tc commands; and avoids log spam.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://patch.msgid.link/20260509171123.307549-4-stephen@networkplumber.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current layout of struct netem_sched_data can be improved
by optimizing cache locality, compacting data types (use u8
for enum) and eliminating unused elements.
Reorganize the struct as follows:
- Cacheline 0 holds the tfifo state (t_root/t_head/t_tail/t_len),
counter, and the unconditional enqueue scalars
latency/jitter/rate/gap/loss.
- Cacheline 1 holds the remaining zero-check scalars
(duplicate/reorder/corrupt/ecn), all five crndstate correlation
structures, and loss_model.
- Cacheline 2 holds prng, delay_dist, the slot dequeue state,
slot_dist, and the inner classful qdisc pointer.
- Rate-shaping fields, q->limit (config-only; the fast path reads
sch->limit), and the CLG Markov state move to the warm tail.
- tc_netem_slot slot_config and qdisc_watchdog (only consulted on
slot reschedule and watchdog wake) move to the cold tail.
Also reorder struct clgstate to place the u8 state member after the
u32 transition probabilities. This removes the 3-byte interior hole
without changing the struct's size.
Should have no functional change.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://patch.msgid.link/20260509171123.307549-2-stephen@networkplumber.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
tfcpad is a u32, but that full range is excessive for padding.
Limit it to max IP length (64k).
Signed-off-by: David Ahern <dahern@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Leo Lin reported OOB write issue in esp component:
xfrm_state_mtu() returns u32 but performs its arithmetic in unsigned
modulo-2^32 space using an attacker-influenced "header_len + authsize +
net_adj" subtracted from a small "mtu" argument. A nobody user can
install an IPv4 ESP tunnel SA with a large authentication key
(XFRMA_ALG_AUTH_TRUNC, e.g. hmac(sha512), 64-byte key, 64-byte trunc),
configure a small interface MTU (68 bytes), and set XFRMA_TFCPAD to a
large value. When a single UDP datagram is then sent through the
tunnel, xfrm_state_mtu() underflows to a near-2^32 value, and
esp_output() consumes it as a signed int via:
padto = min(x->tfcpad, xfrm_state_mtu(x, mtu_cached))
esp.tfclen = padto - skb->len (assigned to int)
esp.tfclen ends up negative (e.g. -207). It is sign-extended to size_t
when passed to memset() inside esp_output_fill_trailer(), producing a
~16 EB write of zeroes at skb_tail_pointer(skb). KASAN logs it as
"Write of size 18446744073709551537 at addr ffff888...".
Check for underflow and return 1. This causes the sendmsg attempt to
fail with ENETUNREACH.
Fixes: c5c2523893 ("[XFRM]: Optimize MTU calculation")
Reported-by: Leo Lin <leo@depthfirst.com>
Assisted-by: Codex:26.506.31004
Signed-off-by: David Ahern <dahern@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Commit 95b58430ab ("fq_codel: add memory limitation per queue")
claimed that the 32Mb default was "reasonable even for heavy duty usages."
In practice, this is not the case.
Packets that are associated with local sockets sk_wmem_alloc
do not really need additional memory control.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260512094859.3673997-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Following patch will use is_skb_wmem() from fq_codel.
Provide __sock_wfree() only if CONFIG_INET=y
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260512094859.3673997-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is netdev_lock_ops() before the NETDEV_REGISTER notifier
in register_netdevice(), so use the non-locking functions
in net_failover_slave_register().
failover_slave_register() in failover_existing_slave_register() adds lock
and unlock ops too.
Call Trace:
<TASK>
__schedule+0x30d/0x7a0
schedule+0x27/0x90
schedule_preempt_disabled+0x15/0x30
__mutex_lock.constprop.0+0x538/0x9e0
__mutex_lock_slowpath+0x13/0x20
mutex_lock+0x3b/0x50
dev_set_mtu+0x40/0xe0
net_failover_slave_register+0x24/0x280
failover_slave_register+0x103/0x1b0
failover_event+0x15e/0x210
? dropmon_net_event+0xac/0xe0
notifier_call_chain+0x5e/0xe0
raw_notifier_call_chain+0x16/0x30
call_netdevice_notifiers_info+0x52/0xa0
register_netdevice+0x5f4/0x7c0
register_netdev+0x1e/0x40
_mlx5e_probe+0xe2/0x370 [mlx5_core]
mlx5e_probe+0x59/0x70 [mlx5_core]
? __pfx_mlx5e_probe+0x10/0x10 [mlx5_core]
Fixes: 4c975fd700 ("net: hold instance lock during NETDEV_REGISTER/UP")
Signed-off-by: Faicker Mo <faicker.mo@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
find_skb() is the netconsole-specific entry into the netpoll skb
pool: every other netpoll consumer (bonding, team, vlan, bridge,
macvlan, dsa) builds its own sk_buff and never touches the pool.
With netpoll_send_udp() (its only caller) now living in netconsole,
find_skb() can join it.
Move find_skb() into drivers/net/netconsole.c as a file-static
helper, drop EXPORT_SYMBOL_GPL(find_skb) and remove its prototype
from include/linux/netpoll.h. find_skb() drains TX completions via
netpoll_zap_completion_queue(), which is already exported in the
NETDEV_INTERNAL namespace, so netconsole picks up
MODULE_IMPORT_NS("NETDEV_INTERNAL") to consume it.
The skb pool's lifecycle (np->skb_pool, np->refill_wq, refill_skbs(),
refill_skbs_work_handler(), skb_pool_flush()) stays in netpoll: it
is initialised in __netpoll_setup() and torn down in
__netpoll_cleanup(), both of which remain netpoll's responsibility.
The refill work queued via schedule_work(&np->refill_wq) from the
moved find_skb() runs refill_skbs_work_handler() in netpoll without
any further plumbing.
This is pure code motion: the function body is unchanged and its
sole caller (netpoll_send_udp(), already moved by an earlier patch)
keeps invoking it the same way. Pre-existing concerns about
find_skb() running from NMI/printk context (zap_completion_queue()
re-entry, skb_pool spinlocks, GFP_ATOMIC allocation, fallback skb
sizing vs. MAX_SKB_SIZE, PREEMPT_RT semantics of __kfree_skb()) are
inherited as-is and are not addressed here; they predate this
series and are out of scope. Fixing them is left for follow-up
work.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260512-netconsole_split-v2-9-1191d14ad66d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
zap_completion_queue() drains the per-CPU softnet completion queue.
Rename it with the netpoll_ prefix shared by the rest of the
subsystem's public API, and promote it from file-static to
EXPORT_SYMBOL_NS_GPL in the NETDEV_INTERNAL namespace so the upcoming
netconsole-side find_skb() can call it once the function moves out.
A forward declaration is added to include/linux/netpoll.h, and the
old file-static forward declaration is dropped.
No functional change.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260512-netconsole_split-v2-8-1191d14ad66d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netpoll_udp_checksum() computes the UDP checksum for netconsole's
packets. Move it into drivers/net/netconsole.c as a file-static
helper; drop its EXPORT_SYMBOL_GPL and remove the prototype from
include/linux/netpoll.h.
This was the last csum_ipv6_magic() consumer in net/core/netpoll.c,
so drop the now-stale <net/ip6_checksum.h> include there. Pull it
into netconsole.c so the moved code keeps building.
It was also the last udp_hdr() consumer in net/core/netpoll.c. The
file no longer needs anything from <net/udp.h> (the UDP socket-layer
helpers); MAX_SKB_SIZE only needs struct udphdr, which is provided
by the lighter <linux/udp.h>. Swap the include accordingly.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260512-netconsole_split-v2-7-1191d14ad66d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
push_udp() builds the UDP header (and triggers the checksum) for
netconsole's UDP packets. Move it into drivers/net/netconsole.c as
a file-static helper; drop its EXPORT_SYMBOL_GPL and remove the
prototype from include/linux/netpoll.h.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260512-netconsole_split-v2-6-1191d14ad66d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
push_eth() builds the Ethernet header for netconsole's UDP packets.
Move it into drivers/net/netconsole.c as a file-static helper; drop
its EXPORT_SYMBOL_GPL and remove the prototype from
include/linux/netpoll.h.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260512-netconsole_split-v2-5-1191d14ad66d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
push_ipv4() builds the IPv4 header for netconsole's UDP packets.
Move it into drivers/net/netconsole.c as a file-static helper; drop
its EXPORT_SYMBOL_GPL and remove the prototype from
include/linux/netpoll.h.
put_unaligned() is no longer used in net/core/netpoll.c, so drop
the now-stale <linux/unaligned.h> include from there. Pull it into
netconsole.c so the moved code keeps building.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260512-netconsole_split-v2-4-1191d14ad66d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
push_ipv6() builds the IPv6 header for netconsole's UDP packets.
Its only caller, netpoll_send_udp(), now lives in netconsole, so
the helper can move there as a file-static function. Drop its
EXPORT_SYMBOL_GPL and remove the prototype from
include/linux/netpoll.h.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260512-netconsole_split-v2-3-1191d14ad66d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move netpoll_send_udp() from net/core/netpoll.c into
drivers/net/netconsole.c as a static helper, drop EXPORT_SYMBOL(),
and remove the prototype from include/linux/netpoll.h.
netconsole was the only in-tree caller of this entry point. Every
other netpoll consumer (bonding, team, vlan, bridge, macvlan, dsa)
already builds its own sk_buff and hands it to netpoll_send_skb(),
so the netpoll send-side interface is now skb-only.
The helpers it depends on (find_skb(), push_ipv6(), push_ipv4(),
push_udp(), push_eth(), netpoll_udp_checksum()) were exposed in
the previous patches and stay in net/core/netpoll.c for now.
Subsequent patches move each of them into netconsole one at a time
and drop the corresponding EXPORT_SYMBOL_GPL.
Pull <linux/ip.h>, <linux/ipv6.h> and <linux/udp.h> into netconsole.c
so the moved code can name the header structures.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260512-netconsole_split-v2-2-1191d14ad66d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Promote each from file-static to EXPORT_SYMBOL_GPL and forward-
declare them in include/linux/netpoll.h so netconsole can call
them once netpoll_send_udp() moves out.
These exports are kept until the end of the series, when
al of them move into netconsole.
No functional change.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260512-netconsole_split-v2-1-1191d14ad66d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During a reset, CBS is not calling reset on its child qdisc, which
might cause qlen/backlog accounting issues. For example, if we have CBS
with a QFQ parent and a netem child with delay, we can create a scenario
where the parent's qlen underflows. QFQ, specifically, uses qlen to
check whether it should deference a pointer, so this scenario may cause
a null-ptr deref in QFQ:
[ 43.875639][ T319] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] SMP KASAN NOPTI
[ 43.876124][ T319] KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f]
[ 43.876417][ T319] CPU: 10 UID: 0 PID: 319 Comm: ping Not tainted 7.0.0-13039-ge728258debd5 #773 PREEMPT(full)
[ 43.876751][ T319] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 43.876949][ T319] RIP: 0010:qfq_dequeue+0x35c/0x1650
[ 43.877123][ T319] Code: 00 fc ff df 80 3c 02 00 0f 85 17 0e 00 00 4c 8d 73 48 48 89 9d b8 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 76 0c 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b
[ 43.877648][ T319] RSP: 0018:ffff8881017ef4f0 EFLAGS: 00010216
[ 43.877845][ T319] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: dffffc0000000000
[ 43.878073][ T319] RDX: 0000000000000009 RSI: 0000000c40000000 RDI: ffff88810eef02b0
[ 43.878306][ T319] RBP: ffff88810eef0000 R08: ffff88810eef0280 R09: 1ffff1102120fd63
[ 43.878523][ T319] R10: 1ffff1102120fd66 R11: 1ffff1102120fd67 R12: 0000000c40000000
[ 43.878742][ T319] R13: ffff88810eef02b8 R14: 0000000000000048 R15: 0000000020000000
[ 43.878959][ T319] FS: 00007f9c51c47c40(0000) GS:ffff88817a0be000(0000) knlGS:0000000000000000
[ 43.879214][ T319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 43.879403][ T319] CR2: 000055e69a2230a8 CR3: 000000010c07a000 CR4: 0000000000750ef0
[ 43.879621][ T319] PKRU: 55555554
[ 43.879735][ T319] Call Trace:
[ 43.879844][ T319] <TASK>
[ 43.879924][ T319] __qdisc_run+0x169/0x1900
[ 43.880075][ T319] ? dev_qdisc_enqueue+0x8b/0x210
[ 43.880222][ T319] __dev_queue_xmit+0x2346/0x37a0
[ 43.880376][ T319] ? register_lock_class+0x3f/0x800
[ 43.880531][ T319] ? srso_alias_return_thunk+0x5/0xfbef5
[ 43.880684][ T319] ? __pfx___dev_queue_xmit+0x10/0x10
[ 43.880834][ T319] ? srso_alias_return_thunk+0x5/0xfbef5
[ 43.880977][ T319] ? __lock_acquire+0x819/0x1df0
[ 43.881124][ T319] ? srso_alias_return_thunk+0x5/0xfbef5
[ 43.881275][ T319] ? srso_alias_return_thunk+0x5/0xfbef5
[ 43.881418][ T319] ? __asan_memcpy+0x3c/0x60
[ 43.881563][ T319] ? srso_alias_return_thunk+0x5/0xfbef5
[ 43.881708][ T319] ? eth_header+0x165/0x1a0
[ 43.881853][ T319] ? lockdep_hardirqs_on_prepare+0xdb/0x1a0
[ 43.882031][ T319] ? srso_alias_return_thunk+0x5/0xfbef5
[ 43.882174][ T319] ? neigh_resolve_output+0x3cc/0x7e0
[ 43.882325][ T319] ? srso_alias_return_thunk+0x5/0xfbef5
[ 43.882471][ T319] ip_finish_output2+0x6b6/0x1e10
Fix this by calling qdisc_reset for CBS' child qdisc.
Sashiko caught an issue which could result in a null ptr deref if
qdisc_create_dflt() is invoked on an unitialised cbs qdisc which is exposed
by this patch. We add an early return if the qdisc is null to address this.
This is a similar approach used by two other fixes[1][2].
The proper fix for this specific issue elucidated by sashiko is to remove
the call to qdisc_reset when qdisc_create_dflt fails. Since the dflt qdisc
isn't attached anywhere yet at that point, calling the reset callback doesn't
make much sense (and as stated has been a source of two other bugs).
We plan on submitting this fix in a later patch.
[1] https://lore.kernel.org/netdev/20221018063201.306474-2-shaozhengchao@huawei.com/
[2] https://lore.kernel.org/netdev/20221018063201.306474-4-shaozhengchao@huawei.com/
Fixes: 585d763af0 ("net/sched: Introduce Credit Based Shaper (CBS) qdisc")
Reported-by: Junyoung Jang <graypanda.inzag@gmail.com>
Tested-by: Junyoung Jang <graypanda.inzag@gmail.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethnl_bitmap32_not_zero() should return true if some bit in [start, end)
is set:
- Fix inverted memchr_inv() sense: return true when the scan finds a
non-zero byte, not when the middle words are all zero.
- Return false for an empty interval (end <= start).
- When end is 32-bit aligned, indices in [start, end) do not include any
bits from map[end_word]; return false after earlier checks found no
non-zero data.
Fixes: 10b518d4e6 ("ethtool: netlink bitset handling")
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The smc_msg_event tracepoint class, shared by smc_tx_sendmsg and
smc_rx_recvmsg, unconditionally dereferences smc->conn.lnk:
__string(name, smc->conn.lnk->ibname)
conn->lnk is only set for SMC-R; for SMC-D it is NULL. Other code on
these paths already handles this (e.g. !conn->lnk in
SMC_STAT_RMB_TX_SIZE_SMALL()). With the tracepoint enabled, the first
sendmsg()/recvmsg() on an SMC-D socket crashes:
Oops: general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [...]
RIP: 0010:strlen+0x1e/0xa0
Call Trace:
trace_event_raw_event_smc_msg_event (net/smc/smc_tracepoint.h:44)
smc_rx_recvmsg (net/smc/smc_rx.c:515)
smc_recvmsg (net/smc/af_smc.c:2859)
__sys_recvfrom (net/socket.c:2315)
__x64_sys_recvfrom (net/socket.c:2326)
do_syscall_64
The faulting address 0x3e0 is offsetof(struct smc_link, ibname),
confirming the NULL ->lnk deref. Enabling the tracepoint requires
root, but the trigger itself is unprivileged: socket(AF_SMC, ...) has
no capability check, and SMC-D negotiation needs no admin step on
s390 or on x86 with the loopback ISM device loaded.
Log an empty device name for SMC-D instead of dereferencing NULL.
Fixes: aff3083f10 ("net/smc: Introduce tracepoints for tx and rx msg")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A logic flaw in __smc_setsockopt() allows a local unprivileged user to
cause a Denial of Service (DoS) by holding the socket lock indefinitely.
The function __smc_setsockopt() calls copy_from_sockptr() while holding
lock_sock(sk). By passing a userfaultfd-monitored memory page (or
FUSE-backed memory on systems where unprivileged userfaultfd is disabled)
as the optval, an attacker can halt execution during the copy operation,
keeping the lock held.
Combined with asynchronous tear-down operations like shutdown(), this
exhausts the kernel wq (kworkers) and triggers the hung task watchdog.
[ 240.123456] INFO: task kworker/u8:2 blocked for more than 120 seconds.
[ 240.123489] Call Trace:
[ 240.123501] smc_shutdown+...
[ 240.123512] lock_sock_nested+...
This patch moves the user-space copy outside the lock_sock() critical
section to prevent the issue.
Fixes: a6a6fe27ba ("net/smc: Dynamic control handshake limitation by socket options")
Signed-off-by: Nicolò Coccia <n.coccia96@gmail.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Tested-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace a bare kfree_skb() with a modern sk_skb_reason_drop() call,
and provide IP_OUTNOROUTES drop reason.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260511072310.1094859-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace a bare kfree_skb() with a modern sk_skb_reason_drop() call,
and provide IP_OUTNOROUTES drop reason.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260511072310.1094859-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk_skb_reason_drop() does not change sock parameter, make it
const so that we can call it from TCP stack without a cast
on a (const) listener socket.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260511072310.1094859-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
iproute2 can spend considerable amount of time in ll_init_map()
or ll_link_get() to dump verbose netdev attributes, contributing
to RTNL pressure.
Add RTEXT_FILTER_NAME_ONLY new flag so that rtnl_fill_ifinfo()
limits its output to:
- struct nlmsghdr
- IFLA_IFNAME
- IFLA_PROP_LIST (alternate names)
We can later avoid using RTNL when RTEXT_FILTER_NAME_ONLY
is requested, as none of these attributes need RTNL.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260511070244.971028-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The default branch in sigd_send() calls sock_put() and returns -EINVAL
without freeing the skb, while all other exit paths do so. Add the
missing dev_kfree_skb() before sock_put() to fix the leak.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Wei Yang <albinwyang@tencent.com>
Link: https://patch.msgid.link/20260509122358.1102997-1-albin_yang@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
phydev->drv can become NULL while the phy_device is still attached to
its net_device, namely after the PHY driver is unbound via sysfs:
echo <mdio_id> > /sys/bus/mdio_bus/drivers/<phy_drv>/unbind
phy_remove() clears phydev->drv but doesn't call phy_detach(), so the
phy_device stays in the link topology xarray and ethnl_req_get_phydev()
still hands it back. ETHTOOL_MSG_PHY_GET then oopses on:
rep_data->drvname = kstrdup(phydev->drv->name, GFP_KERNEL);
drvname is already treated as optional by phy_reply_size(),
phy_fill_reply() and phy_cleanup_data(), so just skip the allocation
when there is no driver bound.
Fixes: 9dd2ad5e92 ("net: ethtool: phy: Convert the PHY_GET command to generic phy dump")
Cc: stable@vger.kernel.org # 6.13.x
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260509215046.107157-1-devnexen@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A message of type CEPH_MSG_OSD_MAP contains an OSD map that itself
contains a CRUSH map. When decoding this CRUSH map in crush_decode(), an
array of max_buckets CRUSH buckets is decoded, where some indices may
not refer to actual buckets and are therefore set to NULL. The received
CRUSH map may optionally contain choose_args that get decoded in
decode_choose_args(). When decoding a crush_choose_arg_map, a series of
choose_args for different buckets is decoded, with the bucket_index
being read from the incoming message. It is only checked that the bucket
index does not exceed max_buckets, but not that it doesn't point to an
index with a NULL bucket. If a (potentially corrupted) message contains
a crush_choose_arg_map including such a bucket_index, a null pointer
dereference may occur in the subsequent processing when attempting to
access the bucket with the given index.
This patch fixes the issue by extending the affected check. Now, it is
only attempted to access the bucket if it is not NULL.
Cc: stable@vger.kernel.org
Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
A message of type CEPH_MSG_OSD_MAP contains an OSD map that itself
contains a CRUSH map. The received CRUSH map may optionally contain
choose_args that get decoded in decode_choose_args(). In this function,
num_choose_arg_maps is read from the message, and a corresponding number
of crush_choose_arg_maps gets decoded afterwards. Each
crush_choose_arg_map has a choose_args_index, which serves as the key
when inserting it into the choose_args rbtree of the decoded crush_map.
If a (potentially corrupted) message contains two crush_choose_arg_maps
with the same index, the assertion in insert_choose_arg_map() triggers a
kernel BUG when trying to insert the second crush_choose_arg_map.
This patch fixes the issue by switching to the non-asserting rbtree
insertion function and rejecting the message if the insertion fails.
[ idryomov: changelog ]
Cc: stable@vger.kernel.org
Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
net_shaper_parse_handle() does not enforce that the user provides
the handle ID. For NODE the ID defaults to UNSPEC for all other
cases it defaults to 0.
For NETDEV 0 is the only option. For QUEUE defaulting to 0 makes
less intuitive sense. Specifically because the behavior should
(IMHO) be the same for all cases where there may be more than
one ID (QUEUE and NODE).
We should either document this as intentional or reject.
I picked the latter with no strong conviction.
Fixes: 4b623f9f0f ("net-shapers: implement NL get operation")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260510192904.3987113-11-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The NETDEV scope represents a singleton root shaper in the per-device
hierarchy. All code assumes NETDEV shapers have id 0:
net_shaper_default_parent() hardcodes parent->id = 0 when returning
the NETDEV parent for QUEUE/NODE children, and the UAPI documentation
describes NETDEV scope as "the main shaper" (singular, not plural).
Make sure we reject non-0 IDs.
Fixes: 4b623f9f0f ("net-shapers: implement NL get operation")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260510192904.3987113-10-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net_shaper_parse_handle() reads the user-supplied handle ID via
nla_get_u32(), accepting the full u32 range. However, the xarray key
is built by net_shaper_handle_to_index() using
FIELD_PREP(NET_SHAPER_ID_MASK, handle->id), where NET_SHAPER_ID_MASK
is GENMASK(25, 0) - only 26 bits wide. FIELD_PREP silently masks off
the upper bits at runtime. A user-supplied NODE id like 0x04000123
becomes id 0x123.
Additionally, a user-supplied id equal to NET_SHAPER_ID_UNSPEC
(0x03FFFFFF, which is NET_SHAPER_ID_MASK itself) would collide with
the sentinel used internally by the group operation to signal
"allocate a new NODE id".
Reject user-supplied IDs >= NET_SHAPER_ID_MASK (i.e., >= 0x03FFFFFF)
in the policy.
Fixes: 4b623f9f0f ("net-shapers: implement NL get operation")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260510192904.3987113-9-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net_shaper_group_send_reply() writes both the NET_SHAPER_A_IFINDEX
attribute (via net_shaper_fill_binding()) and the nested
NET_SHAPER_A_HANDLE attribute (via net_shaper_fill_handle()), but
the reply skb at the call site in net_shaper_nl_group_doit() is
allocated using net_shaper_handle_size(), which only accounts for
the nested handle.
The allocation is therefore short by nla_total_size(sizeof(u32))
(8 bytes) for the IFINDEX attribute. In practice the slab allocator
rounds up the small allocation so the bug is latent, but the size
accounting is wrong and could bite if the reply grew further.
Introduce net_shaper_group_reply_size() that accounts for the full
reply payload and use it both at the genlmsg_new() call site and in
the defensive WARN_ONCE message.
Fixes: 5d5d4700e7 ("net-shapers: implement NL group operation")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260510192904.3987113-7-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
genlmsg_new() alloc failure path in net_shaper_nl_group_doit() forgets
to set ret before jumping to error handling.
Fixes: 5d5d4700e7 ("net-shapers: implement NL group operation")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260510192904.3987113-6-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net_shaper_nl_group_doit() does not deduplicate NET_SHAPER_A_LEAVES
entries. When userspace supplies the same leaf handle twice, the same
old-parent pointer lands twice in old_nodes[]. The cleanup loop double
frees the parent. Of course the same parent may still be in old_nodes[]
twice if we are moving multiple of its leaves.
Note that this patch also implicitly fixes the fact that the
i >= leaves_count path forgets to set ret.
Fixes: 5d5d4700e7 ("net-shapers: implement NL group operation")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260510192904.3987113-4-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The usual way of inserting entries which are not yet fully ready
into XArray is to have a VALID flag. The shaper code has a NOT_VALID
flag. Since XArray code does not let us create entries with marks
already set - the creation of entries is currently not atomic.
Flip the polarity of the VALID flag. This closes the tiny race
in net_shaper_pre_insert() of entries being created without
the NOT_VALID flag.
Fixes: 93954b40f6 ("net-shapers: implement NL set and delete operations")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260510192904.3987113-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For non-linear skbs, virtio_transport_build_skb() goes through
virtio_transport_copy_nonlinear_skb() to copy the original payload
in the new skb to be delivered to the vsockmon tap device.
This manually initializes an iov_iter but does not set iov_iter.count.
Since the iov_iter is zero-initialized, the copy length is zero and no
payload is actually copied to the monitor interface, leaving data
un-initialized.
Fix this by removing the linear vs non-linear split and using
skb_copy_datagram_iter() with iov_iter_kvec() for all cases, as
vhost-vsock already does. This handles both linear and non-linear skbs,
properly initializes the iov_iter, and removes the now unused
virtio_transport_copy_nonlinear_skb().
While touching this code, let's also check the return value of
skb_copy_datagram_iter(), even though it's unlikely to fail.
Fixes: 4b0bf10eb0 ("vsock/virtio: non-linear skb handling for tap")
Reported-by: Yiqi Sun <sunyiqixm@gmail.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Arseniy Krasnov <avkrasnov@rulkc.org>
Link: https://patch.msgid.link/20260508164411.261440-3-sgarzare@redhat.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
virtio_transport_build_skb() builds a new skb to be delivered to the
vsockmon tap device. To build the new skb, it uses the original skb
data length as payload length, but as the comment notes, the original
packet stored in the skb may have been split in multiple packets, so we
need to use the length in the header, which is correctly updated before
the packet is delivered to the tap, and the offset for the data.
This was also similar to what we did before commit 71dc9ec9ac
("virtio/vsock: replace virtio_vsock_pkt with sk_buff") where we probably
missed something during the skb conversion.
Also update the comment above, which was left stale by the skb
conversion and still mentioned a buffer pointer that no longer exists.
Fixes: 71dc9ec9ac ("virtio/vsock: replace virtio_vsock_pkt with sk_buff")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Arseniy Krasnov <avkrasnov@rulkc.org>
Link: https://patch.msgid.link/20260508164411.261440-2-sgarzare@redhat.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In the HSR (High-availability Seamless Redundancy) protocol, node
information is maintained in the node_db. When a supervision frame is
received, node->addr_B_port is updated to track the receiving port type
(e.g., HSR_PT_SLAVE_B).
If the underlying physical interface associated with this slave port is
removed (e.g., via `ip link del`), hsr_del_port() frees the hsr_port
object. However, the stale node->addr_B_port reference is kept in the
node_db until the node ages out.
Subsequently, if userspace queries the node status via the Netlink
command HSR_C_GET_NODE_STATUS, the kernel calls hsr_get_node_data().
This function unconditionally dereferences the pointer returned by
hsr_port_get_hsr():
if (node->addr_B_port != HSR_PT_NONE) {
port = hsr_port_get_hsr(hsr, node->addr_B_port);
*addr_b_ifindex = port->dev->ifindex; // <-- NULL deref
}
If the slave port has been deleted, hsr_port_get_hsr() returns NULL,
resulting in a kernel panic.
Oops: general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:hsr_get_node_data+0x7b6/0x9e0
Call Trace:
<TASK>
hsr_get_node_status+0x445/0xa40
Fix this by adding a proper NULL pointer check. If the port lookup fails
due to a stale port type, gracefully treat it as if no valid port exists
and assign -1 to the interface index.
Steps to reproduce:
1. Create an HSR interface with two slave devices.
2. Receive a supervision frame to populate node_db with
addr_B_port assigned to SLAVE_B.
3. Delete the underlying slave device B.
4. Send an HSR_C_GET_NODE_STATUS Netlink message.
Fixes: c5a7591172 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.")
Signed-off-by: Quan Sun <2022090917019@std.uestc.edu.cn>
Link: https://patch.msgid.link/20260508124636.1462346-1-2022090917019@std.uestc.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The helpers to prepare the buffers for the local and global TT based
replies are trying to sum up all TT entries which can be found for each
VLAN. In theory, this sum can be too big for an u16 and therefore overflow.
A too small buffer would then be allocated for the TVLV.
The too small buffer will be handled gracefully by
batadv_tt_tvlv_generate() and is not causing a buffer overflow - just a
truncated reply. But this overflow shouldn't have happened in the first and
the too small buffer should never have been allocated when an overflow was
detected.
Cc: stable@kernel.org
Fixes: 7ea7b4a142 ("batman-adv: make the TT CRC logic VLAN specific")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The commit 16116dac23 ("batman-adv: prevent TT request storms by not
sending inconsistent TT TLVLs") added checks to the local (direct) TT
response code. But the response can also be done indirectly by another node
using the global TT state. To avoid such inconsistency states reported in
the original fix, also avoid sending empty VLANs for replies from the
global TT state.
Cc: stable@kernel.org
Fixes: 7ea7b4a142 ("batman-adv: make the TT CRC logic VLAN specific")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The local TT based TVLV is generated by first checking the number of VLANs
which have at least one TT entry. A new buffer with the correct size for
the VLANs is then allocated. Only then, the list of VLANs s used to fill
the VLAN entries in the buffer. During this time, the meshif_vlan_list_lock
is held. But the actual number of TT entries of each VLAN can still
increase during this time - just not the number of VLANs in the list.
But the prefilter used in the buffer size calculation might still cause an
increase of the number of VLANs which need to be stored. Simply because a
VLAN might now suddenly have at least one entry when it had none in the
pre-alloc check - and then needs to occupy space which was not allocated.
It is better to overestimate the buffer size at the beginning and then fill
the buffer only with the VLANs which are not empty.
Cc: stable@kernel.org
Fixes: 16116dac23 ("batman-adv: prevent TT request storms by not sending inconsistent TT TLVLs")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
batadv_piv_tt::last_changeset_len len was declared as s16, but the field is
never intended to hold a negative value. When a value greater than 32767 is
assigned, it wraps to a negative signed integer.
In batadv_send_my_tt_response(), last_changeset_len is temporarily widened
to s32. The incorrectly negative s16 value propagates into the s32, causing
batadv_tt_prepare_tvlv_local_data() to allocate a full sized buffer but
populates only a small portion of it with the collected changeset. All
remaining bits are kept uninitialized.
Using an u16 avoids this type confusion and ensures that no (negative) sign
extension is performed in batadv_send_my_tt_response().
Cc: stable@kernel.org
Fixes: a73105b8d4 ("batman-adv: improved client announcement mechanism")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
batadv_orig_node::tt_buff_len was declared as s16, but the field is never
intended to hold a negative value. When a value greater than 32767 is
assigned, it wraps to a negative signed integer.
In batadv_send_other_tt_response(), tt_buff_len is temporarily widened to
s32. The incorrectly negative s16 value propagates into the s32, causing
batadv_tt_prepare_tvlv_global_data() to allocate a full sized buffer but
populates only a small portion of it with the collected changeset. All
remaining bits are kept uninitialized.
Using an u16 avoids this type confusion and ensures that no (negative) sign
extension is performed in batadv_send_other_tt_response().
Cc: stable@kernel.org
Fixes: a73105b8d4 ("batman-adv: improved client announcement mechanism")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
The commit 3a359bf5c6 ("batman-adv: reject oversized global TT response
buffers") added a check to ensure that a global return buffer size can be
stored in an u16. The same buffer handling also exists for the local data
buffer but was not touched.
A similar check should be also be in place for the local TVLV buffer. It
doesn't have the similar attack surface because it is only generated from
locally discovered MAC addresses but the dynamic nature could still cause
temporarily to large buffers.
Cc: stable@kernel.org
Fixes: 7ea7b4a142 ("batman-adv: make the TT CRC logic VLAN specific")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
sizeof(u32) on the _RINGS_CQE_SIZE line is missing its closing
parenthesis, causing nla_total_size() to absorb the subsequent
_TX_PUSH and _RX_PUSH entries.
The resulting size estimate happens to be numerically identical
due to NLA alignment, so not treating this as a real fix.
But the nesting is wrong and misleading.
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260508125412.189804-1-cuitao@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare mqprio_dump_class_stats() for RTNL avoidance.
Use RCU instead of RTNL, and no longer acquire each children spinlock.
As a bonus we no longer have to release/acquire d->lock.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260510091455.4039245-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare mqprio_dump() for RTNL avoidance.
Use RCU instead of RTNL, and no longer acquire each children spinlock.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260510091455.4039245-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare mq_dump_common() for RTNL avoidance.
Use RCU instead of RTNL, and no longer acquire each children spinlock.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260510091455.4039245-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add qstats_backlog_sub() and qstats_backlog_add() helpers
and use them instead of open-coding them.
These helpers use WRITE_ONCE() to prevent store-tearing.
Also use WRITE_ONCE() in fq_reset() and qdisc_reset()
when sch->qstats.backlog is cleared.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260510091455.4039245-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Helpers to increment or decrement sch->q.qlen, with appropriate
WRITE_ONCE() to prevent store tearing.
Add other WRITE_ONCE() when sch->q.qlen is changed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260510091455.4039245-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stats are read locklessly, add READ_ONCE() to prevent load-tearing.
Write side will be handled in separate patches.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260510091455.4039245-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The endpoints are managed in a list which was limited to 8 entries.
This limit can be too small in some cases: by having the same limit as
the number of subflows, it might not allow creating all expected
subflows when having a mix of v4 and v6 addresses that can all use MPTCP
on v4/v6 only networks.
While increasing the limit above the new subflows one, why not using the
technical limit: 255. Indeed, the endpoint will each have an ID that
will be used on the wire, limited to u8, and the ID 0 is reserved to the
initial subflow.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260508-net-next-mptcp-pm-inc-limits-v1-4-c84e3fdf9b6a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mptcp_rm_list structure contains an array of IDs of 8 entries: to be
able to send a RM_ADDR with 8 IDs. This limitation was OK so far because
there could maximum 8 endpoints.
But this is going to change in the next commit. To cope with that, if
one of the arrays is full, the iteration stops, the lists are processed,
then the iteration continues where it previously stopped.
Note that if there are many endpoints to remove, and multiple RM_ADDR to
send, it might be more likely that some of these RM_ADDRs are dropped or
lost. This is a known limitation: RM_ADDR are not retransmitted in
MPTCPv1.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260508-net-next-mptcp-pm-inc-limits-v1-3-c84e3fdf9b6a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This means switching the maximum from 8 to 64 for the number of subflows
and accepted ADD_ADDR.
The previous limit of 8 subflows makes sense in most cases. Using more
subflows will very likely *not* improve the situation, and could even
decrease the performances. But there are no technical limitations nor
performance impact to raise this limit, so let's do it: this will allow
people with very specific use-cases, and researchers to easily create
more subflows, and measure the performance impact by themselves.
The theoretical limit is 255 -- the ID is written in a u8 on the wire --
but 64 is more than enough. With so many subflows, it will be costly to
iterate over all of them when operations are done in bottom half.
Note that the in-kernel PM will continue to create subflows in reply to
ADD_ADDR with a single batch of maximum 8 subflows. Same when adding new
"subflow" endpoints with the fullmesh flag. Increasing those batch
limits would have a memory impact, and it looks fine not to cover these
cases with larger batches for the moment. If more is needed later, the
position of the last subflow from the list could be remembered, and the
list iteration could continue later.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/434
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260508-net-next-mptcp-pm-inc-limits-v1-2-c84e3fdf9b6a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The in-kernel PM can create subflows in reply to ADD_ADDR by batch of
maximum 8 subflows for the moment. Same when adding new "subflow"
endpoints with the fullmesh flag. This limit is linked to the arrays
used during these steps.
There was no explicit limit to the arrays size (8), because the limit of
extra subflows is the same (8). It seems safer to use an explicit limit,
but also these two sizes are going to be different in the next commit.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260508-net-next-mptcp-pm-inc-limits-v1-1-c84e3fdf9b6a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
lockdep_sock_is_held() was added in tcp_ao_established_key()
by the cited commit.
It can be called from tcp_v[46]_timewait_ack() with twsk.
Since it does not have sk->sk_lock, the lockdep annotation
results in out-of-bound access.
$ pahole -C tcp_timewait_sock vmlinux | grep size
/* size: 288, cachelines: 5, members: 8 */
$ pahole -C sock vmlinux | grep sk_lock
socket_lock_t sk_lock; /* 440 192 */
Let's not use lockdep_sock_is_held() for TCP_TIME_WAIT.
Fixes: 6b2d11e2d8 ("net/tcp: Add missing lockdep annotations for TCP-AO hlist traversals")
Reported-by: Damiano Melotti <melotti@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260508120853.4098365-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When iov_iter_get_pages2() fails in rds_message_zcopy_from_user(),
the pinned pages are released with put_page(), and
rm->data.op_mmp_znotifier is cleared. But we fail to properly
clear rm->data.op_nents.
Later when rds_message_purge() is called from rds_sendmsg() the
cleanup loop iterates over the incorrectly non zero number of
op_nents and frees them again.
Fix this by properly resetting op_nents when it should be in
rds_message_zcopy_from_user().
Fixes: 0cebaccef3 ("rds: zerocopy Tx support.")
Signed-off-by: Allison Henderson <achender@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260505234336.2132721-1-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When decoding osd_state and osd_weight from an incoming osdmap in
osdmap_decode(), both are decoded for each osd, i.e., map->max_osd
times. The ceph_decode_need() check only accounts for
sizeof(*map->osd_weight) once. This can potentially result in an
out-of-bounds memory access if the incoming message is corrupted such
that the max_osd value exceeds the actual content of the osdmap message.
This patch fixes the issue by changing the corresponding part in the
ceph_decode_need() check to account for
map->max_osd*sizeof(*map->osd_weight).
Cc: stable@vger.kernel.org
Fixes: dcbc919a5d ("libceph: switch osdmap decoding to use ceph_decode_entity_addr")
Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The receiver shutdown timer handler, batadv_tp_receiver_shutdown(), is
responsible for releasing the tp_vars reference it holds. However, the
existing logic for coordinating this release with batadv_tp_stop_all() was
flawed.
timer_shutdown_sync() guarantees the timer will not fire again after it
returns, but it returns non-zero only when the timer was pending at the
time of the call. If the timer had already expired (and
batadv_tp_stop_all() would unsucessfully try to rearm itself),
batadv_tp_stop_all() skips its batadv_tp_vars_put(), and
batadv_tp_receiver_shutdown() fails to put its own reference as well.
Fix this by introducing a new atomic variable receiving that is set to 1
when the receiver is initialized and cleared atomically with atomic_xchg()
by whichever side claims it first. Only the side that observes the
transition from 1 to 0 is responsible for releasing the tp_vars timer
reference, eliminating the uncertainty.
Cc: stable@kernel.org
Fixes: 3d3cf6a731 ("batman-adv: stop tp_meter sessions during mesh teardown")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
batadv_tp_sender_shutdown() unconditionally decrements the "sending"
atomic counter. If multiple paths (e.g. timeout, user cancel, and
normal finish) call this function, the counter can underflow to -1.
Since the sender logic treats any non-zero value as "still sending",
a negative value causes the sender kthread to loop indefinitely.
This leads to a use-after-free when the interface is removed while
the zombie thread is still active.
Fix this by using atomic_xchg() to ensure the counter only transitions
from 1 to 0 once.
Fixes: 33a3bb4a33 ("batman-adv: throughput meter implementation")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Luxiao Xu <rakukuip@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
[sven: added missing change in batadv_tp_send]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
In __ceph_x_decrypt(), a part of the buffer p is interpreted as a
ceph_x_encrypt_header, and the magic field of this struct is accessed.
This happens without any guarantee that the buffer is large enough to
hold this struct. The function parameter ciphertext_len represents the
length of the ciphertext to decrypt and is guaranteed to be at most the
remaining size of the allocated buffer p. However, this value is not
necessarily greater than sizeof(ceph_x_encrypt_header). E.g., a message
frame of type FRAME_TAG_AUTH_REPLY_MORE, that is just as long to hold
the ciphertext at its end with a ciphertext_len of 8 or less, can
trigger an out-of-bounds memory access when accessing hdr->magic.
This patch fixes the issue by adding a check to ensure that the
decrypted plaintext in the buffer is large enough to represent at least
the ceph_x_encrypt_header.
Cc: stable@vger.kernel.org
Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In crush_decode_uniform_bucket(), the item_weight field of the bucket
is set. This is a single field of type u32 since the uniform bucket uses
the same weight for all items. The value in ceph_decode_need() is set to
(1+b->h.size) * sizeof(u32), which is higher than actually needed.
This patch removes the call to ceph_decode_need() with the unnecessarily
high value and switches the subsequent operation from ceph_decode_32()
to ceph_decode_32_safe(), which already includes the correct bounds
check.
Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
A message of type CEPH_MSG_OSD_MAP containing a crush map with at least
one bucket has two fields holding the bucket algorithm. If the values
in these two fields differ, an out-of-bounds access can occur. This is
the case because the first algorithm field (alg) is used to allocate
the correct amount of memory for a bucket of this type, while the second
algorithm field inside the bucket (b->alg) is used in the subsequent
processing.
This patch fixes the issue by adding a check that compares alg and
b->alg and aborts the processing in case they differ. Furthermore,
b->alg is set to 0 in this case, because the destruction of the crush
map also uses this field to determine the bucket type, which can again
result in an out-of-bounds access when trying to free the memory pointed
to by the fields of the bucket. To correctly free the memory allocated
for the bucket in such a case, the corresponding call to kfree is moved
from the algorithm-specific crush_destroy_bucket functions to the
generic crush_destroy_bucket().
Cc: stable@vger.kernel.org
Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Move the out_free_req label up by a couple of lines so that the
allocated dst SG list gets freed on error as well as success.
Fixes: eb2953d269 ("xfrm: ipcomp: Use crypto_acomp interface")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Reported-by: Yilin Zhu <zylzyl2333@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
These functions return a signal whether FIB flushing is required which
must not be ignored. Use the compiler to help with enforcing this
requirement in the future.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260507075606.322405-4-cratiu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a device is going down or when a net namespace is deleted, all
nexthops on it are removed, and for each nexthop being removed the FIB
table is flushed, which does a full trie traversal looking for entries
marked RTNH_F_DEAD and removing them. This is O(N x R), with N being
number of dev nexthops and R being number of IPv4 routes.
The RTNL is held the entire time.
When there are many nexthops to be removed and many routing entries,
this can result in the RTNL being held for multiple minutes, which
causes unhappiness in other processes trying to acquire the RTNL (e.g.
systemd-networkd for DHCP renewals).
In a complicated deployment with multiple vxlan devices, each having
16K nexthops and a total of 128K ipv4 routes, this is exactly what
happens:
nexthop_flush_dev() # loops over 16K nexthops
-> remove_nexthop()
-> __remove_nexthop()
-> __remove_nexthop_fib() # marks fi->fib_flags |= RTNH_F_DEAD
-> fib_flush() # for EACH nexthop!
-> fib_table_flush() # walks the ENTIRE FIB, 128K entries
This patch makes use of the previously added FIB flushing signal to only
do a single FIB flush after all nexthops to be removed are marked as
RTNH_F_DEAD:
- __remove_nexthop_fib() no longer flushes the FIB.
- nexthop_flush_dev() and flush_all_nexthops() now keep track whether
any nexthop was removed and trigger a FIB flush at the end.
- a new wrapper is defined, remove_one_nexthop() which calls
remove_nexthop() and flushes if necessary. This is intended for places
which must remove a single nexthop and shouldn't worry about the need
to trigger a FIB flush. For now, the only caller is rtm_del_nexthop().
- The two direct callers of __remove_nexthop() get a WARN_ON_ONCE, since
the nh about to be removed should not have any FIB entries referencing
it when replacing or inserting a new one.
This dramatically improves performance from O(N x R) to O(N + R).
Releasing a nexthop reference in remove_nexthop() now no longer frees
it. Instead, it is deleted when the last fib_info pointing to it gets
freed via free_fib_info_rcu(). All routing code is already careful not
to take into consideration routes marked with RTNH_F_DEAD.
Tested with:
DEV=eth2
ip link set up dev $DEV
ip link add testnh0 link $DEV type macvlan mode bridge
ip addr add 198.51.100.1/24 dev testnh0
ip link set testnh0 up
seq 1 65536 | \
sed 's/.*/nexthop add id & via 198.51.100.2 dev testnh0/' | \
ip -batch -
i=1
for a in $(seq 0 255); do
for b in $(seq 0 255); do
echo "route add 10.${a}.${b}.0/32 nhid $i"
i=$((i + 1))
done
done | ip -batch -
time ip link set testnh0 down
ip link del testnh0
Without this patch:
real 0m32.601s
user 0m0.000s
sys 0m32.511s
With this patch:
real 0m0.209s
user 0m0.000s
sys 0m0.153s
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260507075606.322405-3-cratiu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Plumb a bool value throughout the various nexthop removal functions,
determined in the innermost __remove_nexthop_fib() (which still does the
FIB flushing) and propagated up all callers.
The next patch will make use of this signal to optimize the removal of
multiple nexthops by moving the FIB flushing up the call hierarchy.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260507075606.322405-2-cratiu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert KCM socket's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of put_user()/copy_to_user()
- Add linux/uio.h for copy_to_iter()
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260507-getsock_two-v2-4-5873111d9c12@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert X.25 socket's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of put_user()/copy_to_user()
- Add linux/uio.h for copy_to_iter()
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260507-getsock_two-v2-3-5873111d9c12@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert LLC socket's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of put_user()/copy_to_user()
- Add linux/uio.h for copy_to_iter()
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260507-getsock_two-v2-2-5873111d9c12@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert MCTP socket's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input)
- Use copy_to_iter() instead of copy_to_user()
- Add linux/uio.h for copy_to_iter()
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260507-getsock_two-v2-1-5873111d9c12@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- fix integer overflow on buff_pos, by Lyes Bourennani
- fix invalid tp_meter access during teardown, by Jiexun Wang (2 patches)
- stop caching unowned originator pointers in BAT IV, by Jiexun Wang
- tp_meter: fix tp_num leak on kmalloc failure, by Sven Eckelmann
- fix BLA refcounting issues, by Sven Eckelmann (3 patches)
-----BEGIN PGP SIGNATURE-----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=JP6m
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-pullrequest-20260508' of https://git.open-mesh.org/batadv
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- fix integer overflow on buff_pos, by Lyes Bourennani
- fix invalid tp_meter access during teardown, by Jiexun Wang (2 patches)
- stop caching unowned originator pointers in BAT IV, by Jiexun Wang
- tp_meter: fix tp_num leak on kmalloc failure, by Sven Eckelmann
- fix BLA refcounting issues, by Sven Eckelmann (3 patches)
* tag 'batadv-net-pullrequest-20260508' of https://git.open-mesh.org/batadv:
batman-adv: bla: put backbone reference on failed claim hash insert
batman-adv: bla: only purge non-released claims
batman-adv: bla: prevent use-after-free when deleting claims
batman-adv: tp_meter: fix tp_num leak on kmalloc failure
batman-adv: stop caching unowned originator pointers in BAT IV
batman-adv: stop tp_meter sessions during mesh teardown
batman-adv: reject new tp_meter sessions during teardown
batman-adv: fix integer overflow on buff_pos
====================
Link: https://patch.msgid.link/20260508154314.12817-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sunrpc_cache_requests_snapshot() filters requests with
crq->seqno <= min_seqno. The min_seqno for the first netlink
dump call is cb->args[0] which is 0. Since next_seqno was
initialized to 0, the very first cache request got seqno=0
and was silently skipped by the snapshot (0 <= 0 is true).
This caused netlink-based GET_REQS to return 0 pending requests
even when a request was queued, preventing mountd from resolving
cache entries (particularly expkey/nfsd.fh). The unresolved
CACHE_PENDING state blocked all further notifications for the
entry, leading to permanent NFS4ERR_DELAY hangs.
Start next_seqno at 1 so all requests have seqno >= 1 and pass
the snapshot filter when min_seqno is 0.
Fixes: facc4e3c80 ("sunrpc: split cache_detail queue into request and reader lists")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The DATA-packet handler in rxrpc_input_call_event() and the RESPONSE
handler in rxrpc_verify_response() copy the skb to a linear one before
calling into the security ops only when skb_cloned() is true. An skb
that is not cloned but still carries externally-owned paged fragments
(e.g. SKBFL_SHARED_FRAG set by splice() into a UDP socket via
__ip_append_data, or a chained skb_has_frag_list()) falls through to
the in-place decryption path, which binds the frag pages directly into
the AEAD/skcipher SGL via skb_to_sgvec().
Extend the gate to also unshare when skb_has_frag_list() or
skb_has_shared_frag() is true. This catches the splice-loopback vector
and other externally-shared frag sources while preserving the
zero-copy fast path for skbs whose frags are kernel-private (e.g. NIC
page_pool RX, GRO). The OOM/trace handling already in place is reused.
Fixes: d0d5c0cd1e ("rxrpc: Use skb_unshare() rather than skb_cow_data()")
Cc: stable@vger.kernel.org
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
XSKMAP entries are used as redirect targets for incoming XDP frames.
A TX-only AF_XDP socket lacks an Rx ring and cannot handle redirected
traffic, but xsk_map_update_elem() currently allows such sockets to
be inserted into the map.
Redirecting packets to such a socket on the veth generic-XDP path
causes a kernel crash in xsk_generic_rcv().
This became possible after xsk_is_setup_for_bpf_map() was removed from
the XSKMAP update path, which allowed bound TX-only sockets to be
inserted into the map.
Reject TX-only sockets during XSKMAP updates to avoid the crash.
They remain fully operational for pure Tx purposes outside XSKMAP.
Fixes: 968be23cea ("xsk: Fix possible segfault at xskmap entry insertion")
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Yifan Wu <yifanwucs@gmail.com>
Signed-off-by: Linpu Yu <linpu5433@gmail.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20260508144344.694-1-linpu5433@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----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=i40t
-----END PGP SIGNATURE-----
Merge tag 'nf-26-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains Netfilter fixes for net:
1) Allow initial x_tables table replacement without emitting an audit
log message. Delay the register message until after hooks are wired up
to avoid unnecessary unregister logs during error unwinding.
2) Fix a NULL dereference by allocating hook ops before adding the
table to the per-netns list. Use `synchronize_rcu()` during error
unwinding to ensure the table stops processing packets before
teardown. Defer audit log register message until all operations
succeed.
3) Refactor xtables to use a single `xt_unregister_table_pre_exit`
function. Eliminate code duplication by centralizing table
unregistration logic within the xtables core. ebtables cannot be
changed due to incompatibility.
4) Unregister xtables templates before module removal. This prevents
a race condition where userspace instantiates a new table after the
pernet unreg removed the current table.
5) Add `xtables_unregister_table_exit` to fully unregister netfilter
tables during module removal. Unlink the table from dying lists,
then free hook operations.
6) Implement a two-stage removal scheme for ebtables following the
x_tables pattern. Assign table->ops while holding the ebt mutex to
prevent exposing partially-filled structures.
7) Fix ebtables module initialization race. Register the template last
in table initialization functions. Prevent table instantiation before
pernet operations are available.
8) Fix a race condition in x_tables module initialization. Ensure
pernet ops are fully set up before exposing the table to userspace.
9) Fix a race condition in ebtables module initialization, similar to
previous patch.
10) Restore propagation of helper to expected connection, this is a
fix-for-recent-fix.
11) Validate that the expectation tuple and mask netlink attributes are
present when adding expectation via nfqueue, this fixes a possible
null-ptr-deref.
12) Fix possible rare memleak in the SIP helper in case helper has been
detached from conntrack entry, from Li Xiasong.
13) Fix refcount leak in nft_ct when creating custom expectation, also
from Li Xiason.
Patches 1-9 from Florian Westphal.
10) Restore propagation of helper to expected connection, this is a
fix-for-recent-fix.
11) Check that tuple and mask netlink attributes are set when creating an
expectation via nfqueue.
* tag 'nf-26-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_ct: fix missing expect put in obj eval
netfilter: nf_conntrack_sip: get helper before allocating expectation
netfilter: ctnetlink: check tuple and mask in expectations created via nfqueue
netfilter: nf_conntrack_expect: restore helper propagation via expectation
netfilter: bridge: eb_tables: close module init race
netfilter: x_tables: close dangling table module init race
netfilter: ebtables: close dangling table module init race
netfilter: ebtables: move to two-stage removal scheme
netfilter: x_tables: add and use xtables_unregister_table_exit
netfilter: x_tables: unregister the templates first
netfilter: x_tables: add and use xt_unregister_table_pre_exit
netfilter: x_tables: allocate hook ops while under mutex
netfilter: x_tables: allow initial table replace without emitting audit log message
====================
Link: https://patch.msgid.link/20260507234509.603182-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The SCTP_SENDALL path in sctp_sendmsg() iterates ep->asocs with
list_for_each_entry_safe(), which caches the next entry in @tmp before
the loop body runs. The body calls sctp_sendmsg_to_asoc(), which may
drop the socket lock inside sctp_wait_for_sndbuf().
While the lock is dropped, another thread can SCTP_SOCKOPT_PEELOFF the
association cached in @tmp, migrating it to a new endpoint via
sctp_sock_migrate() (list_del_init() + list_add_tail() to
newep->asocs), and optionally close the new socket which frees the
association via kfree_rcu(). The cached @tmp can also be freed by a
network ABORT for that association, processed in softirq while the
lock is dropped.
sctp_wait_for_sndbuf() revalidates @asoc (the current entry) on re-lock
via the "sk != asoc->base.sk" and "asoc->base.dead" checks, but nothing
revalidates @tmp. After a successful return, the iterator advances to
the stale @tmp, yielding either a use-after-free (if the peeled socket
was closed) or a list-walk onto the new endpoint's list head (type
confusion of &newep->asocs as a struct sctp_association *).
Both are reachable from CapEff=0; the type-confusion path gives
controlled indirect call via the outqueue.sched->init_sid pointer.
Fix by re-deriving @tmp from @asoc after sctp_sendmsg_to_asoc()
returns. @asoc is known to still be on ep->asocs at that point: the
only callers that list_del an association from ep->asocs are
sctp_association_free() (which sets asoc->base.dead) and
sctp_assoc_migrate() (which changes asoc->base.sk), and
sctp_wait_for_sndbuf() checks both under the lock before any
successful return; a tripped check propagates as err < 0 and the loop
bails before the re-derive.
The SCTP_ABORT path in sctp_sendmsg_check_sflags() returns 0 and the
loop hits 'continue' before sctp_sendmsg_to_asoc() is ever called, so
the @tmp cached by list_for_each_entry_safe() still covers the
lock-held free that ba59fb0273 ("sctp: walk the list of asoc
safely") was added for.
Fixes: 4910280503 ("sctp: add support for snd flag SCTP_SENDALL process in sendmsg")
Cc: stable@vger.kernel.org
Signed-off-by: Ben Morris <bmorris@anthropic.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20260508001455.3137-1-joycathacker@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The protodown functionality allows user space to turn off the carrier of
a net device:
# ip link add name dummy1 up type dummy
# ip link add name macvlan1 up link dummy1 type macvlan mode bridge
# ip link set dev macvlan1 protodown on
$ ip -br link show dev macvlan1
macvlan1@dummy1 DOWN 0a:5c:a3:05:c7:86 <NO-CARRIER,BROADCAST,MULTICAST,UP>
When protodown is turned off, the core unconditionally turns on the
carrier of the net device:
# ip link set dev macvlan1 protodown off
$ ip -br link show dev macvlan1
macvlan1@dummy1 UP 0a:5c:a3:05:c7:86 <BROADCAST,MULTICAST,UP,LOWER_UP>
This is wrong as it means that a macvlan can end up with a carrier when
its lower device does not have a carrier:
# ip link set dev dummy1 carrier off
$ ip -br link show dev macvlan1
macvlan1@dummy1 LOWERLAYERDOWN 0a:5c:a3:05:c7:86 <NO-CARRIER,BROADCAST,MULTICAST,UP>
# ip link set dev macvlan1 protodown on
# ip link set dev macvlan1 protodown off
$ ip -br link show dev macvlan1
macvlan1@dummy1 UP 0a:5c:a3:05:c7:86 <BROADCAST,MULTICAST,UP,LOWER_UP>
Solve this by resolving the linked net device and if one exists, inherit
its carrier state when protodown is turned off. Otherwise, if no linked
net device exists, as before, simply turn on the carrier.
Resolve the linked net device using a new helper and have it return the
device itself (in a similar fashion to dev_get_iflink()) if the device
does not implement both ndo_get_iflink() and get_link_net(). If the
latter is not implemented, it is unclear in which network namespace we
should look up the linked net device. Currently, this helper is only
used for net devices that support protodown (macvlan and vxlan) and for
both it returns the correct result.
Output with the patch:
# ip link add name dummy1 up type dummy
# ip link add name macvlan1 up link dummy1 type macvlan mode bridge
# ip link set dev dummy1 carrier off
$ ip -br link show dev macvlan1
macvlan1@dummy1 LOWERLAYERDOWN 0a:5c:a3:05:c7:86 <NO-CARRIER,BROADCAST,MULTICAST,UP>
# ip link set dev macvlan1 protodown on
# ip link set dev macvlan1 protodown off
$ ip -br link show dev macvlan1
macvlan1@dummy1 LOWERLAYERDOWN 0a:5c:a3:05:c7:86 <NO-CARRIER,BROADCAST,MULTICAST,UP>
# ip link set dev dummy1 carrier on
$ ip -br link show dev macvlan1
macvlan1@dummy1 UP 0a:5c:a3:05:c7:86 <BROADCAST,MULTICAST,UP,LOWER_UP>
# ip link set dev macvlan1 protodown on
# ip link set dev macvlan1 protodown off
$ ip -br link show dev macvlan1
macvlan1@dummy1 UP 0a:5c:a3:05:c7:86 <BROADCAST,MULTICAST,UP,LOWER_UP>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260507105906.891817-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The protodown functionality allows user space to turn off the carrier of
a net device:
# ip link add name dummy1 up type dummy
# ip link add name macvlan1 up link dummy1 type macvlan mode bridge
# ip link set dev macvlan1 protodown on
$ ip -br link show dev macvlan1
macvlan1@dummy1 DOWN 0a:5c:a3:05:c7:86 <NO-CARRIER,BROADCAST,MULTICAST,UP>
Different applications can set different protodown reasons, which
prevents an application from turning on the carrier of a net device as
long as others want it down:
# ip link set dev macvlan1 protodown_reason 1 on
# ip link set dev macvlan1 protodown_reason 2 on
# ip link set dev macvlan1 protodown off
Error: Cannot clear protodown, active reasons.
# ip link set dev macvlan1 protodown_reason 2 off
# ip link set dev macvlan1 protodown off
Error: Cannot clear protodown, active reasons.
# ip link set dev macvlan1 protodown_reason 1 off
# ip link set dev macvlan1 protodown off
$ ip -br link show dev macvlan1
macvlan1@dummy1 UP 0a:5c:a3:05:c7:86 <BROADCAST,MULTICAST,UP,LOWER_UP>
Unfortunately, this mechanism is not very useful when the carrier of a
net device can be toggled by toggling the carrier of its lower device:
# ip link set dev macvlan1 protodown on
$ ip -br link show dev macvlan1
macvlan1@dummy1 DOWN 0a:5c:a3:05:c7:86 <NO-CARRIER,BROADCAST,MULTICAST,UP>
# ip link set dev dummy1 carrier off
# ip link set dev dummy1 carrier on
$ ip -br link show dev macvlan1
macvlan1@dummy1 UP 0a:5c:a3:05:c7:86 <BROADCAST,MULTICAST,UP,LOWER_UP>
Obviously, this is not the intended behavior and it is unlikely to be
relied on by anyone. In fact, it is a problem for applications like FRR
that use protodown with macvlan on top of a bridge as part of Virtual
Router Redundancy Protocol (VRRP).
Solve this by preventing a net device configured with protodown on from
gaining carrier by making netif_carrier_on() a NOP when protodown is
turned on.
Output with the patch:
# ip link add name dummy1 up type dummy
# ip link add name macvlan1 up link dummy1 type macvlan mode bridge
# ip link set dev macvlan1 protodown on
$ ip -br link show dev macvlan1
macvlan1@dummy1 DOWN 0a:5c:a3:05:c7:86 <NO-CARRIER,BROADCAST,MULTICAST,UP>
# ip link set dev dummy1 carrier off
# ip link set dev dummy1 carrier on
$ ip -br link show dev macvlan1
macvlan1@dummy1 DOWN 0a:5c:a3:05:c7:86 <NO-CARRIER,BROADCAST,MULTICAST,UP>
# ip link set dev macvlan1 protodown off
$ ip -br link show dev macvlan1
macvlan1@dummy1 UP 0a:5c:a3:05:c7:86 <BROADCAST,MULTICAST,UP,LOWER_UP>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260507105906.891817-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A subsequent patch will make netif_carrier_on() a NOP for net devices
that have protodown turned on so that they will not accidentally gain
carrier. As a preparation, set dev->proto_down before calling
netif_carrier_{off,on}().
Note that the only driver that supports protodown and has a notion of a
carrier is macvlan and it is calling netif_carrier_{off,on}() with RTNL
held.
No functional changes intended.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260507105906.891817-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an existing node-scope shaper is moved to a different parent
via the group operation, the framework fails to update the leaves
count on both the old and new parent shapers. Only newly created
nodes (handle.id == NET_SHAPER_ID_UNSPEC) trigger the parent
leaves increment at line 1039.
This causes the parent's leaves counter to diverge from the
actual number of children in the xarray. When the node is later
deleted, pre_del_node() allocates an array sized by the stale
leaves count, but the xarray iteration finds more children than
expected, hitting the WARN_ON_ONCE guard and returning -EINVAL.
Rather than adding reparenting support with complex leaves count
bookkeeping, reject group calls that attempt to change an existing
node's parent. Updates to an existing node's rate or leaves under
the same parent remain permitted. We expect that for any modification
of the topology user should always create new groups and let the
kernel garbage collect the leaf-less nodes.
Fixes: 5d5d4700e7 ("net-shapers: implement NL group operation")
Signed-off-by: Mohsin Bashir <hmohsin@meta.com>
Link: https://patch.msgid.link/20260506233745.111895-1-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These methods generally consume ownership of the provided skb, so even
if an error path is encountered, the skb is freed. This is because the
very first thing they do after some initial setup is to unconditionally
consume the skb via consume_skb(skb). Any subsequent errors lead to the
core netlink layer freeing the skb.
However, there is one check that occurs before ownership is passed,
which is the check for the group index. So if this error condition is
encountered, then the skb is leaked. This error condition is generally
considered a violation of the netlink API, so it's not expected to occur
under normal circumstances. For the same reason, no callers check for
this error condition, and no callers need to be adjusted. However, we
should still follow the same ownership semantics of the rest of the
function. Thus, free the skb in this codepath.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Suggested-by: Matthew Maurer <mmaurer@google.com>
Fixes: 2a94fe48f3 ("genetlink: make multicast groups const, prevent abuse")
Link: https://lore.kernel.org/r/845b36ba-7b3a-41f2-acb2-b284f253e2ca@lunn.ch
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260506-genlmsg-return-v2-1-a63ee2a055d6@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In phy_prepare_data(), several strings such as 'name', 'drvname',
'upstream_sfp_name', and 'downstream_sfp_name' are allocated using
kstrdup(). However, these allocations were not checked for failure.
If kstrdup() fails for 'name', it returns NULL while the function
continues. This leads to a kernel NULL pointer dereference and panic
later in phy_reply_size() when it unconditionally calls strlen() on
the NULL pointer.
While other strings like 'upstream_sfp_name' might be checked before
access in certain code paths, failing to handle these allocations
consistently can lead to incomplete data reporting or hidden bugs.
Fix this by adding proper NULL checks for all kstrdup() calls in
phy_prepare_data() and implement a centralized error handling path
using goto labels to ensure all previously allocated resources are
freed on failure.
Fixes: 9dd2ad5e92 ("net: ethtool: phy: Convert the PHY_GET command to generic phy dump")
Signed-off-by: Quan Sun <2022090917019@std.uestc.edu.cn>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260507131738.1173835-1-2022090917019@std.uestc.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When in irq deferral mode (defer-hard-irqs > 0), a short enough
gro-flush timeout can trigger before NAPI_STATE_SCHED is cleared if the
last poll in busy_poll_stop() takes too long. This can have the effect
of leaving the queue stuck with interrupts disabled and no timer armed
which results in a tx timeout if there is no subsequent busypoll cycle.
To prevent this, defer the gro-flush timer arm after the last poll.
Fixes: 7fd3253a7d ("net: Introduce preferred busy-polling")
Co-developed-by: Martin Karsten <mkarsten@uwaterloo.ca>
Signed-off-by: Martin Karsten <mkarsten@uwaterloo.ca>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260506090808.820559-2-dtatulea@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fl_size, fl_ht and ip6_fl_lock in net/ipv6/ip6_flowlabel.c are
file scope and shared across netns. mem_check() reads fl_size to
decide whether to deny non-CAP_NET_ADMIN callers. capable() runs
against init_user_ns, so an unprivileged user in any non-init
userns can push fl_size past FL_MAX_SIZE - FL_MAX_SIZE / 4 and
starve every other unprivileged userns on the host.
Add struct netns_ipv6::flowlabel_count, bumped and decremented
next to fl_size in fl_intern, ip6_fl_gc and ip6_fl_purge. The new
field fills the existing 4-byte hole after ipmr_seq, so struct
netns_ipv6 stays the same size on 64-bit builds.
Bump FL_MAX_SIZE from 4096 to 8192. It has been 4096 since the
file was added. Machines and connection counts have grown.
mem_check() folds an extra per-netns ceiling into the existing
non-CAP_NET_ADMIN conditional. The ceiling is half of the total
budget that unprivileged callers have ever been able to use, i.e.
(FL_MAX_SIZE - FL_MAX_SIZE / 4) / 2 = 3072 entries. With
FL_MAX_SIZE doubled, this preserves the original per-user reach
of 3K (what an unprivileged caller could already obtain before
this change), while forcing an attacker to spread allocations
across at least two netns to exhaust the global non-CAP_NET_ADMIN
budget.
CAP_NET_ADMIN against init_user_ns still bypasses both caps.
The previous patch took ip6_fl_lock across mem_check and
fl_intern, so the new flowlabel_count read in mem_check and the
new flowlabel_count++ in fl_intern run under the same critical
section. flowlabel_count is therefore plain int, like fl_size.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Suggested-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Maoyi Xie <maoyi.xie@ntu.edu.sg>
Link: https://patch.msgid.link/20260506082416.2259567-3-maoyixie.tju@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mem_check() in net/ipv6/ip6_flowlabel.c reads fl_size without
holding ip6_fl_lock. fl_intern() takes the lock immediately
afterwards. The two checks therefore race against concurrent
fl_intern, ip6_fl_gc and ip6_fl_purge writers, which makes the
mem_check budget check approximate.
Move spin_lock_bh(&ip6_fl_lock) and the matching unlock from
fl_intern() into its only caller ipv6_flowlabel_get(). The
mem_check() call now runs under the same critical section as the
fl_intern() insert, so the budget check is exact.
With all writers and the read of fl_size under ip6_fl_lock,
convert fl_size from atomic_t to plain int. The four sites that
update or read fl_size are fl_intern (insert path), ip6_fl_gc
(garbage collector, the !sched check and the per-entry decrement),
ip6_fl_purge (per-netns purge), and mem_check (budget check), and
all four now run under ip6_fl_lock.
This is a prerequisite for adding a per-netns budget alongside
fl_size. The follow-up patch adds netns_ipv6::flowlabel_count and
folds it into mem_check().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Suggested-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Maoyi Xie <maoyi.xie@ntu.edu.sg>
Link: https://patch.msgid.link/20260506082416.2259567-2-maoyixie.tju@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NIPA tries to make sure that HW tests don't modify system state.
It saves the state of page pools, too. Now that I write this commit
message I realize that this is impractical since page pool IDs and
state will get legitimately changed by the tests. But I already
spent a couple of hours implementing the filtering, so..
Link: https://patch.msgid.link/20260506034821.1710113-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When TCP socket migration happens in reqsk_timer_handler(),
@sk_listener will be updated with the new listener.
When we call __inet_csk_reqsk_queue_drop(), the listener must
be the one stored in req->rsk_listener.
The cited commit accidentally replaced oreq->rsk_listener with
sk_listener, leading to imbalanced icsk_accept_queue count.
Let's pass the correct listener to __inet_csk_reqsk_queue_drop().
Fixes: e8c526f2bd ("tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink().")
Reported-by: Damiano Melotti <melotti@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260506035954.1563147-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When TCP socket migration fails at inet_ehash_insert() in
reqsk_timer_handler(), we jump to the no_ownership: label
and free the new reqsk immediately with __reqsk_free().
Thus, we must stop the new reqsk's timer before jumping to the
label, but the timer might be missed since the cited commit,
resulting in UAF.
As we are in the original reqsk's timer context, we can safely
call timer_delete_sync() for the new reqsk.
Let's pass false to __inet_csk_reqsk_queue_drop() to stop
the new reqsk's timer.
Fixes: 83fccfc394 ("inet: fix potential deadlock in reqsk_queue_unlink()")
Reported-by: Damiano Melotti <melotti@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260506035954.1563147-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sol_tcp_sockopt() only checks if sk->sk_protocol is IPPROTO_TCP,
but RAW socket can bypass it:
socket(AF_INET, SOCK_RAW, IPPROTO_TCP)
Let's use sk_is_tcp().
Note that initially sol_tcp_sockopt() checked sk->sk_prot->setsockopt.
Fixes: 2ab42c7b87 ("bpf: Check the protocol of a sock to agree the calls to bpf_setsockopt().")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260504210610.180150-7-kuniyu@google.com
bpf_skc_to_tcp6_sock() only checks if sk->sk_protocol is IPPROTO_TCP
and sk->sk_family is AF_INET6, but RAW socket can bypass it:
socket(AF_INET6, SOCK_RAW, IPPROTO_TCP)
Let's check sk->sk_type too.
Fixes: af7ec13833 ("bpf: Add bpf_skc_to_tcp6_sock() helper")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260504210610.180150-6-kuniyu@google.com
bpf_skc_to_tcp_sock() only checks if sk->sk_protocol is
IPPROTO_TCP, but RAW socket can bypass it:
socket(AF_INET, SOCK_RAW, IPPROTO_TCP)
Let's use sk_is_tcp().
Fixes: 478cfbdf5f ("bpf: Add bpf_skc_to_{tcp, tcp_timewait, tcp_request}_sock() helpers")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260504210610.180150-5-kuniyu@google.com
bpf_mptcp_sock_from_subflow() only checks if sk->sk_protocol is
IPPROTO_TCP, but RAW socket can bypass it:
socket(AF_INET, SOCK_RAW, IPPROTO_TCP)
In this case, it would NOT be valid to call sk_is_mptcp() which will
assume sk is a pointer to a struct tcp_sock, and wrongly checks for:
tcp_sk(sk)->is_mptcp.
Fixes: 3bc253c2e6 ("bpf: Add bpf_skc_to_mptcp_sock_proto")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260504210610.180150-4-kuniyu@google.com
When batadv_bla_add_claim() fails to insert a new claim into the hash, it
leaked a reference to the backbone_gw for which the claim was intended.
Call batadv_backbone_gw_put() on the error path to release the reference
and avoid leaking the backbone_gw object.
Cc: stable@kernel.org
Fixes: 3db0decf11 ("batman-adv: Fix non-atomic bla_claim::backbone_gw access")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
When batadv_bla_purge_claims() goes through the list of claims, it is only
traversing the hash list with an rcu_read_lock(). Due to a potential
parallel batadv_claim_put(), it can happen that it encounters a claim which
was actually in the process of being released+freed by
batadv_claim_release(). In this case, backbone_gw is set to NULL before the
delayed RCU kfree is started. Calling batadv_bla_claim_get_backbone_gw() is
then no longer allowed because it would cause a NULL-ptr derefence.
To avoid this, only claims with a valid reference counter must be purged.
All others are already taken care of.
Cc: stable@kernel.org
Fixes: 23721387c4 ("batman-adv: add basic bridge loop avoidance code")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
When batadv_bla_del_backbone_claims() removes all claims for a backbone, it
does this by dropping the link entry in the hash list. This list entry
itself was one of the references which need to be dropped at the same time
via batadv_claim_put().
But the batadv_claim_put() must not be done before the last access to the
claim object in this function. Otherwise the claim might be freed already
by the batadv_claim_release() function before the list entry was dropped.
Cc: stable@kernel.org
Fixes: 23721387c4 ("batman-adv: add basic bridge loop avoidance code")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
When batadv_tp_start() or batadv_tp_init_recv() fail to allocate a new
tp_vars object, the previously incremented bat_priv->tp_num counter is
never decremented. This causes tp_num to drift upward on each allocation
failure. Since only BATADV_TP_MAX_NUM sessions can be started and the count
is never reduced for these failed allocations, it causes to an exhaustion
of throughput meter sessions. In worst case, no new throughput meter
session can be started until the mesh interface is removed.
The error handling must decrement tp_num releasing the lock and aborting
the creation of an throughput meter session
Cc: stable@kernel.org
Fixes: 33a3bb4a33 ("batman-adv: throughput meter implementation")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
BAT IV keeps the last-hop neighbor address in each neigh_node, but some
paths also cache an originator pointer derived from a temporary lookup.
That pointer is not owned by the neigh_node and may no longer refer to a
live originator entry after purge handling runs.
Stop storing the auxiliary originator pointer in the BAT IV neighbor
state. When BAT IV needs the neighbor originator data, resolve it from
the stored neighbor address and drop the reference again after use.
Fixes: c6c8fea297 ("net: Add batman-adv meshing protocol")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
[sven: avoid bonding logic for outgoing OGM]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
cfg80211_merge_profile() reassembles a Multi-BSSID non-transmitted BSS
profile that has been split across multiple consecutive MBSSID elements.
Its while-loop calls
cfg80211_get_profile_continuation(ie, ielen, mbssid_elem, sub_elem)
but never advances mbssid_elem or sub_elem inside the body. Each
iteration therefore searches for a continuation that follows the same
fixed pair; the helper returns the same next_mbssid; and the same
next_sub bytes are memcpy()'d into merged_ie at a growing offset until
the buffer fills.
Advance both mbssid_elem and sub_elem to the just-consumed continuation
so the next call to cfg80211_get_profile_continuation() searches for a
further continuation beyond it (or returns NULL when none exists).
A specially-crafted malicious beacon can take advantage of this bug
to cause the kernel to spend an excessive amount of time in
cfg80211_merge_profile (up to as much as 2ms per beacon received),
which could theoretically be abused in some way.
Cc: stable@vger.kernel.org
Fixes: fe806e4992 ("cfg80211: support profile split between elements")
Signed-off-by: John Walker <johnwalker0@gmail.com>
Link: https://patch.msgid.link/20260507230720.64783-1-johnwalker0@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
nft_ct_expect_obj_eval() allocates an expectation and may call
nf_ct_expect_related(), but never drops its local reference.
Add nf_ct_expect_put(exp) before return to balance allocation.
Fixes: 857b46027d ("netfilter: nft_ct: add ct expectations support")
Cc: stable@vger.kernel.org
Signed-off-by: Li Xiasong <lixiasong1@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
process_register_request() allocates an expectation and then checks
whether a conntrack helper is available. If helper lookup fails, the
function returns early and the allocated expectation is left behind.
Reorder the code to fetch and validate helper before calling
nf_ct_expect_alloc(). This keeps the logic simpler and removes the leak
path while preserving existing behavior.
Fixes: e14575fa75 ("netfilter: nf_conntrack: use rcu accessors where needed")
Cc: stable@vger.kernel.org
Signed-off-by: Li Xiasong <lixiasong1@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Ensure the expectation tuple and mask attributes are present in netlink
message, otherwise null-ptr-deref is possible.
Fixes: bd07793705 ("netfilter: nfnetlink_queue: allow to attach expectations to conntracks")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
A recent series to fix expectations broke helper propagation via
expectation, this mechanism is used by the sip and h323 helper. This
also propagates the conntrack helper to expected connections. I changed
semantics of exp->helper which now tells us the actual helper that
created the expectation.
Add an explicit assign_helper field to expectations for this purpose
and update helpers to use it.
Restore this feature for userspace conntrack helper via ctnetlink
nfqueue integration so it is again possible to attach a helper to an
expectation, where it makes sense. This is not restored via ctnetlink
expectation creation as there is no client for such feature. Use the
expectation layer 4 protocol number for the helper lookup for
consistency.
Make sure the expectation using this helper propagation mechanism also
go away when the helper is unregistered.
Fixes: 9c42bc9db9 ("netfilter: nf_conntrack_expect: honor expectation helper field")
Fixes: 917b61fa20 ("netfilter: ctnetlink: ignore explicit helper on new expectations")
Reported-by: Ilya Maximets <i.maximets@ovn.org>
Tested-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
sashiko reports for unrelated patch:
Does the core ebtables initialization in ebtables.c suffer from a similar race?
Once nf_register_sockopt() completes, the sockopts are exposed globally.
sockopt has to be registered last, just like in ip/ip6/arptables.
Fixes: 5b53951cfc ("netfilter: ebtables: use net_generic infra")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Similar to the previous ebtables patch:
template add exposes the table to userspace, we must do this last to
rnsure the pernet ops are set up (contain the destructors).
Fixes: fdacd57c79 ("netfilter: x_tables: never register tables by default")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
sashiko reported for a related patch:
In modules like iptable_raw.c, [..], if register_pernet_subsys() fails,
the rollback might call kfree(rawtable_ops) before [..]
During this window, could a concurrent userspace process find the globally
visible template, trigger table_init(), [..]
The table init functions must always register the template last.
Otherwise, set/getsockopt can instantiate a table in a namespace
while the required pernet ops (contain the destructor) isn't available.
This change is also required in x_tables, handled in followup change.
Fixes: 87663c39f8 ("netfilter: ebtables: do not hook tables by default")
Reviewed-by: Tristan Madani <tristan@talencesecurity.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Like previous patches for x_tables, follow same pattern in ebtables.
We can't reuse xt helpers: ebt_table struct layout is incompatible.
table->ops assignment is now done while still holding the ebt mutex
to make sure we never expose partially-filled table struct.
Fixes: 87663c39f8 ("netfilter: ebtables: do not hook tables by default")
Reviewed-by: Tristan Madani <tristan@talencesecurity.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Previous change added xtables_unregister_table_pre_exit to detach the
table from the packetpath and to unlink it from the active table list.
In case of rmmod, userspace that is doing set/getsockopt for this table
will not be able to re-instantiate the table:
1. The larval table has been removed already
2. existing instantiated table is no longer on the xt pernet table list.
This adds the second stage helper:
unlink the table from the dying list, free the hook ops (if any) and do
the audit notification. It replaces xt_unregister_table().
Fixes: fdacd57c79 ("netfilter: x_tables: never register tables by default")
Reported-by: Tristan Madani <tristan@talencesecurity.com>
Reviewed-by: Tristan Madani <tristan@talencesecurity.com>
Closes: https://lore.kernel.org/netfilter-devel/20260429175613.1459342-1-tristmd@gmail.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When the module is going away we need to zap the template
first. Else there is a small race window where userspace
could instantiate a new table after the pernet exit function
has removed the current table.
Fixes: fdacd57c79 ("netfilter: x_tables: never register tables by default")
Reported-by: Tristan Madani <tristan@talencesecurity.com>
Reviewed-by: Tristan Madani <tristan@talencesecurity.com>
Closes: https://lore.kernel.org/netfilter-devel/20260429175613.1459342-1-tristmd@gmail.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Remove the copypasted variants of _pre_exit and add one single
function in the xtables core. ebtables is not compatible with
x_tables and therefore unchanged.
This is a preparation patch to reduce noise in the followup
bug fixes.
Reviewed-by: Tristan Madani <tristan@talencesecurity.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
arp/ip(6)t_register_table() add the table to the per-netns list via
xt_register_table() before allocating the per-netns hook ops copy
via kmemdup_array(). This leaves a window where the table is
visible in the list with ops=NULL.
If the pernet exit happens runs concurrently the pre_exit callback finds
the table via xt_find_table() and passes the NULL ops pointer to
nf_unregister_net_hooks(), causing a NULL dereference:
general protection fault in nf_unregister_net_hooks+0xbc/0x150
RIP: nf_unregister_net_hooks (net/netfilter/core.c:613)
Call Trace:
ipt_unregister_table_pre_exit
iptable_mangle_net_pre_exit
ops_pre_exit_list
cleanup_net
Fix by moving the ops allocation into the xtables core so the table is
never in the list without valid ops. Also ensure the table is no longer
processing packets before its torn down on error unwind.
nf_register_net_hooks might have published at least one hook; call
synchronize_rcu() if there was an error.
audit log register message gets deferred until all operations have
passed, this avoids need to emit another ureg message in case of
error unwinding.
Based on earlier patch by Tristan Madani.
Fixes: f9006acc8d ("netfilter: arp_tables: pass table pointer via nf_hook_ops")
Fixes: ee177a5441 ("netfilter: ip6_tables: pass table pointer via nf_hook_ops")
Fixes: ae68933422 ("netfilter: ip_tables: pass table pointer via nf_hook_ops")
Link: https://lore.kernel.org/netfilter-devel/20260429175613.1459342-1-tristmd@gmail.com/
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
At the moment we emit the audit log a bit too early, which makes it
necessary to also emit an unregister log in case we have to unwind
errors after possible hook register failure.
Followup patch will be slightly simpler if we can delay the
register message until after the hooks have been wired up.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If a socket is bound to a wildcard address, tcp_v[46]_connect()
updates it with a non-wildcard address based on the route lookup.
After bhash2 was introduced in the cited commit, we must call
inet_bhash2_update_saddr() to update the bhash2 entry as well.
If inet_bhash2_update_saddr() fails, we must release the refcount
for dst by ip_route_connect() or ip6_dst_lookup_flow().
While tcp_v4_connect() calls ip_rt_put() in the error path,
tcp_v6_connect() does not call dst_release().
Let's call dst_release() when inet_bhash2_update_saddr() fails
in tcp_v6_connect().
Fixes: 28044fc1d4 ("net: Add a bhash2 table hashed by port and address")
Reported-by: Damiano Melotti <melotti@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260506070443.1699879-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In smc_connect_work(), when the underlying TCP handshake fails, the error
code (rc) must be propagated to sk_err to ensure userspace can correctly
retrieve the error status via SO_ERROR. Currently, the code only handles
a restricted set of error codes (e.g., EPIPE, ECONNREFUSED). If other
errors occurs, such as EHOSTUNREACH, sk_err remains unset (zero).
This affects applications that rely on SO_ERROR to determine connect
outcome. For example, higher versions of Go's netpoller treats
SO_ERROR == 0 combined with a failed getpeername() as a spurious wakeup
and re-enters epoll_wait(). Under ET mode, no further edge will be
generated since the socket is already in a terminal state, causing the
connect to hang indefinitely or until a user-specified timeout, if one
is set.
Fixes: 50717a37db ("net/smc: nonblocking connect rework")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Link: https://patch.msgid.link/20260506014105.27093-1-alibuda@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SIOCATMARK reports whether the receive queue is at the urgent mark for
MSG_OOB.
In AF_UNIX, MSG_OOB is supported only for SOCK_STREAM sockets.
SOCK_DGRAM and SOCK_SEQPACKET reject MSG_OOB in sendmsg() and recvmsg(),
so they should not support SIOCATMARK either.
Return -EOPNOTSUPP for non-stream sockets before checking the receive
queue.
Fixes: 314001f0bf ("af_unix: Add OOB support")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260506140825.2987635-1-n05ec@lzu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both nfc_hci_recv_from_llc() and nci_hci_data_received_cb() read
packet->header from skb->data at function entry without first checking
that the buffer holds at least one byte. A malicious NFC peer can send
a 0-byte HCP frame that passes through the SHDLC layer and reaches
these functions, causing an out-of-bounds heap read of packet->header.
The same 0-byte frame, if queued as a non-final fragment, also causes
the reassembly loop to underflow msg_len to UINT_MAX, triggering
skb_over_panic() when the reassembled skb is written.
Fix this by adding a pskb_may_pull() check at the entry of each
function before packet->header is first accessed. The existing
pskb_may_pull() checks before the reassembled hcp_skb is cast to
struct hcp_packet remain in place to guard the 2-byte HCP message
header.
Fixes: 8b8d2e08bf ("NFC: HCI support")
Fixes: 11f54f2286 ("NFC: nci: Add HCI over NCI protocol support")
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Ashutosh Desai <ashutoshdesai993@gmail.com>
Link: https://patch.msgid.link/20260505170712.96560-1-ashutoshdesai993@gmail.com
Signed-off-by: David Heidelberg <david@ixit.cz>
xfrm_send_migrate() in net/xfrm/xfrm_user.c and pfkey_send_migrate()
in net/key/af_key.c both hardcode &init_net for the multicast that
announces a successful XFRM_MSG_MIGRATE / SADB_X_MIGRATE.
XFRM_MSG_MIGRATE arrives on a per-netns NETLINK_XFRM socket, and the
rest of the xfrm/af_key netlink path was made netns-aware in 2008.
The other 14 multicast paths in xfrm_user.c route their event using
xs_net(x), xp_net(xp) or sock_net(skb->sk); only the migrate path
was missed.
Two consequences of the init_net hardcoding:
1. The notification (selector, old/new endpoint addresses, and the
km_address) is delivered to listeners on init_net's
XFRMNLGRP_MIGRATE / pfkey BROADCAST_ALL groups rather than on
the issuing netns. An IKE daemon running in init_net therefore
receives migration notifications originating from any other
netns on the host.
2. An IKE daemon running inside a non-init netns and subscribed
to its own XFRMNLGRP_MIGRATE / pfkey groups never receives the
notification of its own migration. IKEv2 MOBIKE / address-update
handling inside a netns is silently broken.
Thread struct net through km_migrate() and the xfrm_mgr.migrate
function pointer, drop the &init_net override in xfrm_send_migrate()
and pfkey_send_migrate(), and pass the caller's net (already in
scope in xfrm_migrate() via sock_net(skb->sk)) all the way down.
struct xfrm_mgr is in-tree only and not exported as a stable API,
so the function-pointer signature change is internal.
pfkey_broadcast() is already netns-aware via net_generic(net,
pfkey_net_id) since the pernet conversion. The five other
pfkey_broadcast() callers in af_key.c already pass xs_net(x),
sock_net(sk) or a per-netns net, so this only removes the
&init_net outlier.
Fixes: 5c79de6e79 ("[XFRM]: User interface for handling XFRM_MSG_MIGRATE")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Maoyi Xie <maoyi.xie@ntu.edu.sg>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When sending an MP_PRIO, closed subflows need to be skipped.
This fixes the case where the initial subflow got closed, re-opened
later, then an MP_PRIO is needed for the same local address.
Note that explicit MP_PRIO cannot be sent during the 3WHS, so it is fine
to use __mptcp_subflow_active().
Fixes: 067065422f ("mptcp: add the outgoing MP_PRIO support")
Cc: stable@vger.kernel.org
Fixes: b29fcfb54c ("mptcp: full disconnect implementation")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-9-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When looking at the maximum RTO amongst the subflows, inactive subflows
were taken into account: that includes stale ones, and the initial one
if it has been already been closed.
Unusable subflows are now simply skipped. Stale ones are used as an
alternative: if there are only stale ones, to take their maximum RTO and
avoid to eventually fallback to net.mptcp.add_addr_timeout, which is set
to 2 minutes by default.
Fixes: 30549eebc4 ("mptcp: make ADD_ADDR retransmission timeout adaptive")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-7-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an ADD_ADDR needs to be retransmitted and another one has already
been prepared -- e.g. multiple ADD_ADDRs have been sent in a row and
need to be retransmitted later -- this additional retransmission will
need to wait.
In this case, the timer was reset to TCP_RTO_MAX / 8, which is ~15
seconds. This delay is unnecessary long: it should just be rescheduled
at the next opportunity, e.g. after the retransmission timeout.
Without this modification, some issues can be seen from time to time in
the selftests when multiple ADD_ADDRs are sent, and the host takes time
to process them, e.g. the "signal addresses, ADD_ADDR timeout" MPTCP
Join selftest, especially with a debug kernel config.
Note that on older kernels, 'timeout' is not available. It should be
enough to replace it by one second (HZ).
Fixes: 00cfd77b90 ("mptcp: retransmit ADD_ADDR when timeout")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-6-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer(),
and released at the end.
If at that moment, it was the last reference being held, the sk would
not be freed. sock_put() should then be called instead of __sock_put().
But that's not enough: if it is the last reference, sock_put() will call
sk_free(), which will end up calling sk_stop_timer_sync() on the same
timer, and waiting indefinitely to finish. So it is needed to mark that
the timer is done at the end of the timer handler when it has not been
rescheduled, not to call sk_stop_timer_sync() on "itself".
Fixes: 00cfd77b90 ("mptcp: retransmit ADD_ADDR when timeout")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-5-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer().
It should then be released in all cases at the end.
Some (unlikely) checks were returning directly instead of calling
sock_put() to decrease the refcount. Jump to a new 'exit' label to call
__sock_put() (which will become sock_put() in the next commit) to fix
this potential leak.
While at it, drop the '!msk' check which cannot happen because it is
never reset, and explicitly mark the remaining one as "unlikely".
Fixes: 00cfd77b90 ("mptcp: retransmit ADD_ADDR when timeout")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-4-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This mptcp_pm_add_timer() helper is executed as a timer callback in
softirq context. To avoid any data races, the socket lock needs to be
held with bh_lock_sock().
If the socket is in use, retry again soon after, similar to what is done
with the keepalive timer.
Fixes: 00cfd77b90 ("mptcp: retransmit ADD_ADDR when timeout")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-3-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ADD_ADDR can be sent for the ID 0, which corresponds to the local
address and port linked to the initial subflow.
Indeed, this address could be removed, and re-added later on, e.g. what
is done in the "delete re-add signal" MPTCP Join selftests. So no reason
to ignore it.
Fixes: 00cfd77b90 ("mptcp: retransmit ADD_ADDR when timeout")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-2-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When adding the ADD_ADDR to the list, the address including the IP, port
and ID are copied. On the other hand, when the endpoint corresponds to
the one from the initial subflow, the ID is set to 0, as specified by
the MPTCP protocol.
The issue is that the ID was reset after having copied the ID in the
ADD_ADDR entry. So the retransmission was done, but using a different ID
than the initial one.
Fixes: 8b8ed1b429 ("mptcp: pm: reuse ID 0 after delete and re-add")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-1-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_child_process( .. child ...) currently calls sock_put(child).
Unfortunately @child (named @nsk in callers) can be used after
this point to send a RST packet.
To fix this UAF, I remove the sock_put() from tcp_child_process()
and let the callers handle this after it is safe.
Remove @rsk variable in tcp_v4_do_rcv() and change tcp_v6_do_rcv()
so that both functions look the same.
Fixes: cfb6eeb4c8 ("[TCP]: MD5 Signature Option (RFC2385) support.")
Reported-by: Damiano Melotti <melotti@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260505153927.3435532-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When performing a lockless lookup over the inet_peer rbtree,
if a matching node is found, inet_getpeer() returns it immediately
without validating the seqlock sequence.
This missing check introduces a race condition:
Trigger Path: When a host receives an incoming fragmented IPv4 packet,
ip4_frag_init() (in net/ipv4/ip_fragment.c) calls inet_getpeer_v4()
to track the peer.
The Race: If the packet is from a new source IP, CPU A acquires the
write_seqlock, allocates a new inet_peer node (p), sets its IP address
(daddr), and links it to the rbtree (rb_link_node).
Uninitialized Access: Due to the lack of memory barriers between
rb_link_node and the initialization of the rest of the struct
(like refcount_set(&p->refcnt, 1)), CPU A can make the node visible
to readers before its refcnt is initialized.
This is especially true on weakly-ordered architectures like ARM64
where the CPU can reorder the memory stores.
Lockless Reader: Concurrently, CPU B processes a second fragmented packet
from the same source IP. CPU B does a lockless lookup, finds the newly
inserted node, and returns it immediately.
Use-After-Free (UAF): CPU B reads p->refcnt as uninitialized garbage
(left over from previous kmalloc-128/192 allocations).
If the garbage is > 0, refcount_inc_not_zero(&p->refcnt) succeeds.
CPU A then executes refcount_set(&p->refcnt, 1), overwriting CPU B's increment.
When CPU B finishes with the fragment queue, it calls inet_putpeer(),
which drops the refcount to 0 and frees the node via RCU.
The node is now freed but remains linked in the rbtree,
resulting in a Use-After-Free in the rbtree.
Fixes: b145425f26 ("inetpeer: remove AVL implementation in favor of RB tree")
Reported-by: Damiano Melotti <melotti@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260505133233.3039575-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=WKO1
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2026-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2026-05-05
1. Fix an IPv6 encapsulation error path that leaked route references
when UDPv6 ESP decapsulation resolved to an error route.
From Yilin Zhu.
2. Fix AH with ESN on async crypto paths by accounting for the extra
high-order sequence number when reconstructing the temporary
authentication layout in the completion callbacks.
From Michael Bomarito.
3. Fix XFRM output so it does not overwrite already-correct inner header
pointers when a tunnel layer such as VXLAN has already saved them.
The fix comes with new selftests. From Cosmin Ratiu.
4. Add the missing native payload size entry for XFRM_MSG_MAPPING in the
compat translation path. From Ruijie Li.
5. Harden __xfrm_state_delete() against repeated or inconsistent unhashing
of state list nodes by keying the removal on actual list membership and
using delete-and-init helpers. From Michal Kosiorek.
6. Prevent ESP from decrypting shared splice-backed skb fragments in place
by marking UDP splice frags as shared and forcing copy-on-write in ESP
input when needed. From Kuan-Ting Chen.
* tag 'ipsec-2026-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: esp: avoid in-place decrypt on shared skb frags
xfrm: defensively unhash xfrm_state lists in __xfrm_state_delete
xfrm: provide message size for XFRM_MSG_MAPPING
xfrm: Don't clobber inner headers when already set
tools/selftests: Add a VXLAN+IPsec traffic test
tools/selftests: Use a sensible timeout value for iperf3 client
xfrm: ah: account for ESN high bits in async callbacks
ipv6: xfrm6: release dst on error in xfrm6_rcv_encap()
====================
Link: https://patch.msgid.link/20260505132326.1362733-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit dbf666e4fc ("Bluetooth: HIDP: Fix possible UAF") made
hidp_session_remove() drop the L2CAP reference and set
session->conn = NULL once the session is considered removed, and
added a bare if (session->conn) guard around the kthread-exit
l2cap_unregister_user() call in hidp_session_thread(). The sibling
ioctl site in hidp_connection_del() still reads session->conn
unlocked and unguarded, and the kthread-exit guard itself is a
lockless double-read.
hidp_session_find() drops hidp_session_sem before returning, so
hidp_session_remove() can null session->conn between the lookup and
the call in hidp_connection_del(). Worse, since commit 752a6c9596
("Bluetooth: L2CAP: Fix use-after-free in l2cap_unregister_user")
takes mutex_lock(&conn->lock) inside l2cap_unregister_user(), a
stale non-NULL snapshot also UAFs on conn->lock. v1 only added an
if (session->conn) guard at the ioctl site, which doesn't address
either race; Luiz suggested snapshotting session->conn under the
sem and clearing it before the call.
Taking hidp_session_sem across l2cap_unregister_user() would be
wrong: l2cap_conn_del() already establishes the lock order
conn->lock -> hidp_session_sem
via l2cap_unregister_all_users() -> user->remove ==
hidp_session_remove(), so taking hidp_session_sem before conn->lock
would AB/BA deadlock.
Factor a helper hidp_session_unregister_conn() that under
down_write(&hidp_session_sem) snapshots session->conn and clears
the member, then outside the sem calls l2cap_unregister_user() and
l2cap_conn_put() on the snapshot. Call it from both
hidp_connection_del() and hidp_session_thread()'s exit path. At
most one consumer wins the write-sem; later callers observe
session->conn == NULL and skip the unregister and put, so the
reference hidp_session_new() took via l2cap_conn_get() is consumed
exactly once. session_free() already tolerates a NULL session->conn.
Fixes: dbf666e4fc ("Bluetooth: HIDP: Fix possible UAF")
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Link: https://lore.kernel.org/all/20260422011437.176643-1-michael.bommarito@gmail.com/
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_le_big_sync_established_evt() currently does:
conn->num_bis = 0;
memset(conn->bis, 0, sizeof(conn->num_bis));
sizeof(conn->num_bis) is wrong - it would make sense to either use
conn->num_bis (before setting that to 0) or sizeof(conn->bis).
Fix it by using sizeof(conn->bis), the least intrusive change.
Luckily, nothing actually depends on this memset() working properly:
Nothing seems to ever read from conn->bis beyond conn->num_bis, and when
conn->num_bis is increased, the corresponding elements of conn->bis are
initialized. So I think this line could also just be removed.
This is a purely theoretical fix and should have no impact on actual
behavior.
Fixes: 42ecf19471 ("Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
rfcomm_recv_data() treats the first payload byte as a credit field when
the UIH frame carries PF and credit-based flow control is enabled.
After the header has been stripped, the PF/CFC path consumes that byte
with a direct skb->data dereference followed by skb_pull(). A malformed
short frame can reach this path without a byte available.
Use skb_pull_data() so the length check and pull happen together before
the returned credit byte is consumed.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Several iso_pi(sk) fields (qos, qos_user_set, bc_sid, base, base_len,
sync_handle, bc_num_bis) are written under lock_sock in
iso_sock_setsockopt() and iso_sock_bind(), but read and written under
hci_dev_lock only in two other paths:
- iso_connect_bis() / iso_connect_cis(), invoked from connect(2),
read qos/base/bc_sid and reset qos to default_qos on the
qos_user_set validation failure -- all without lock_sock.
- iso_connect_ind(), invoked from hci_rx_work, writes sync_handle,
bc_sid, qos.bcast.encryption, bc_num_bis, base and base_len on
PA_SYNC_ESTABLISHED / PAST_RECEIVED / BIG_INFO_ADV_REPORT /
PER_ADV_REPORT events. The BIG_INFO handler additionally passes
&iso_pi(sk)->qos together with sync_handle / bc_num_bis / bc_bis
to hci_conn_big_create_sync() while setsockopt may be mutating
them.
Acquire lock_sock around the affected accesses in both paths.
The locking order hci_dev_lock -> lock_sock matches the existing
iso_conn_big_sync() precedent, whose comment documents the same
requirement for hci_conn_big_create_sync(). The HCI connect/bind
helpers do not wait for command completion -- they enqueue work via
hci_cmd_sync_queue{,_once}() / hci_le_create_cis_pending() and
return -- so the added hold time is comparable to iso_conn_big_sync().
KCSAN report:
BUG: KCSAN: data-race in iso_connect_cis / iso_sock_setsockopt
read to 0xffffa3ae8ce3cdc8 of 1 bytes by task 335 on cpu 0:
iso_connect_cis+0x49f/0xa20
iso_sock_connect+0x60e/0xb40
__sys_connect_file+0xbd/0xe0
__sys_connect+0xe0/0x110
__x64_sys_connect+0x40/0x50
x64_sys_call+0xcad/0x1c60
do_syscall_64+0x133/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f
write to 0xffffa3ae8ce3cdc8 of 60 bytes by task 334 on cpu 1:
iso_sock_setsockopt+0x69a/0x930
do_sock_setsockopt+0xc3/0x170
__sys_setsockopt+0xd1/0x130
__x64_sys_setsockopt+0x64/0x80
x64_sys_call+0x1547/0x1c60
do_syscall_64+0x133/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 UID: 0 PID: 334 Comm: iso_setup_race Not tainted 7.0.0-10949-g8541d8f725c6 #44 PREEMPT(lazy)
The iso_connect_ind() races were found by inspection.
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: SeungJu Cheon <suunj1331@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
iso_sock_connect() copies the destination address into
iso_pi(sk)->dst under lock_sock, then releases the lock and reads
it back with bacmp() to decide between the CIS and BIS connect
paths:
lock_sock(sk);
bacpy(&iso_pi(sk)->dst, &sa->iso_bdaddr);
iso_pi(sk)->dst_type = sa->iso_bdaddr_type;
release_sock(sk);
if (bacmp(&iso_pi(sk)->dst, BDADDR_ANY)) // <- no lock held
This read after release_sock() races with any concurrent write to
iso_pi(sk)->dst on the same socket.
Fix by reading the destination address directly from the local
sockaddr argument (sa->iso_bdaddr) instead of iso_pi(sk)->dst.
Since sa is a function-local argument, reading it requires no
locking and avoids the race.
This patch addresses only the bacmp() race in iso_sock_connect();
other unprotected iso_pi(sk) accesses are fixed separately in the
next patch.
KCSAN report:
BUG: KCSAN: data-race in memcmp+0x39/0xb0
race at unknown origin, with read to 0xffff8f96ea66dde3 of 1 bytes by task 549 on cpu 1:
memcmp+0x39/0xb0
iso_sock_connect+0x275/0xb40
__sys_connect_file+0xbd/0xe0
__sys_connect+0xe0/0x110
__x64_sys_connect+0x40/0x50
x64_sys_call+0xcad/0x1c60
do_syscall_64+0x133/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f
value changed: 0x00 -> 0xee
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 UID: 0 PID: 549 Comm: iso_race_combin Not tainted 7.0.0-08391-g1d51b370a0f8 #40 PREEMPT(lazy)
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: SeungJu Cheon <suunj1331@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
sk deref in sco_conn_ready must be done either under conn->lock, or
holding a refcount, to avoid concurrent close. conn->sk and parent sk is
currently accessed without either, and without checking parent->sk_state:
[Task 1] [Task 2]
sco_sock_release
sco_conn_ready
sk = conn->sk
lock_sock(sk)
conn->sk = NULL
lock_sock(sk)
release_sock(sk)
sco_sock_kill(sk)
UAF on sk deref
and similarly for access to sco_get_sock_listen() return value.
Fix possible UAF by holding sk refcount in sco_conn_ready() and making
sco_get_sock_listen() increase refcount. Also recheck after lock_sock
that the socket is still valid. Adjust conn->sk locking so it's
protected also by lock_sock() of the associated socket if any.
Fixes: 27c24fda62 ("Bluetooth: switch to lock_sock in SCO")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add the same NULL guard already present in
l2cap_sock_resume_cb() and l2cap_sock_ready_cb().
Fixes: 80808e431e ("Bluetooth: Add l2cap_chan_ops abstraction")
Cc: stable@kernel.org
Signed-off-by: Siwei Zhang <oss@fourdim.xyz>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add the same NULL guard already present in
l2cap_sock_resume_cb() and l2cap_sock_ready_cb().
Fixes: 8d836d71e2 ("Bluetooth: Access sk_sndtimeo indirectly in l2cap_core.c")
Cc: stable@kernel.org
Signed-off-by: Siwei Zhang <oss@fourdim.xyz>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add the same NULL guard already present in
l2cap_sock_resume_cb() and l2cap_sock_ready_cb().
Fixes: 89bc500e41 ("Bluetooth: Add state tracking to struct l2cap_chan")
Cc: stable@kernel.org
Signed-off-by: Siwei Zhang <oss@fourdim.xyz>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When a BLE peripheral sends an L2CAP Connection Parameter Update Request
the processing path is:
process_pending_rx() [takes conn->lock]
l2cap_le_sig_channel()
l2cap_conn_param_update_req()
hci_le_conn_update() [takes hdev->lock]
Meanwhile other code paths take the locks in the opposite order:
l2cap_chan_connect() [takes hdev->lock]
...
mutex_lock(&conn->lock)
l2cap_conn_ready() [hdev->lock via hci_cb_list_lock]
...
mutex_lock(&conn->lock)
This is a classic AB/BA deadlock which lockdep reports as a circular
locking dependency when connecting a BLE MIDI keyboard (Carry-On FC-49).
Fix this by making hci_le_conn_update() defer the HCI command through
hci_cmd_sync_queue() so it no longer needs to take hdev->lock in the
caller context. The sync callback uses __hci_cmd_sync_status_sk() to
wait for the HCI_EV_LE_CONN_UPDATE_COMPLETE event, then updates the
stored connection parameters (hci_conn_params) and notifies userspace
(mgmt_new_conn_param) only after the controller has confirmed the update.
A reference on hci_conn is held via hci_conn_get()/hci_conn_put() for
the lifetime of the queued work to prevent use-after-free, and
hci_conn_valid() is checked before proceeding in case the connection was
removed while the work was pending. The hci_dev_lock is held across
hci_conn_valid() and all conn field accesses to prevent a concurrent
disconnect from invalidating the connection mid-use.
Fixes: f044eb0524 ("Bluetooth: Store latency and supervision timeout in connection params")
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The L2CAP specification states that if more than one channel is being
reconfigured, the MPS shall not be decreased. The current check has
two issues:
1) The comparison uses >= (greater-than-or-equal), which incorrectly
rejects reconfiguration requests where the MPS stays the same.
Since the spec says MPS "shall be greater than or equal to the
current MPS", only a strict decrease (remote_mps > mps) should be
rejected. Keeping the same MPS is valid.
2) The multi-channel guard uses `&& i` (loop index) to approximate
"more than one channel", but this incorrectly allows MPS decrease
for the first channel (i==0) even when multiple channels are being
reconfigured. Replace with `&& num_scid > 1` which correctly
checks whether the request covers more than one channel.
Fixes: 7accb1c432 ("Bluetooth: L2CAP: Fix invalid response to L2CAP_ECRED_RECONF_REQ")
Signed-off-by: Dudu Lu <phx0fer@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In bnep_rx_frame(), the BNEP_FILTER_NET_TYPE_SET and
BNEP_FILTER_MULTI_ADDR_SET extension header parsing has two bugs:
1) The 2-byte length field is read with *(u16 *)(skb->data + 1), which
performs a native-endian read. The BNEP protocol specifies this field
in big-endian (network byte order), and the same file correctly uses
get_unaligned_be16() for the identical fields in
bnep_ctrl_set_netfilter() and bnep_ctrl_set_mcfilter().
2) The length is multiplied by 2, but unlike BNEP_SETUP_CONN_REQ where
the length byte counts UUID pairs (requiring * 2 for two UUIDs per
entry), the filter extension length field already represents the total
data size in bytes. This is confirmed by bnep_ctrl_set_netfilter()
which reads the same field as a byte count and divides by 4 to get
the number of filter entries.
The bogus * 2 means skb_pull advances twice as far as it should,
either dropping valid data from the next header or causing the pull
to fail entirely when the doubled length exceeds the remaining skb.
Fix by splitting the pull into two steps: first use skb_pull_data() to
safely pull and validate the 3-byte fixed header (ctrl type + length),
then pull the variable-length data using the properly decoded length.
Fixes: bf8b9a9cb7 ("Bluetooth: bnep: Add support to extended headers of control frames")
Signed-off-by: Dudu Lu <phx0fer@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_le_create_big_complete_evt() iterates over BT_BOUND connections for
a BIG handle using a while loop, accessing ev->bis_handle[i++] on each
iteration. However, there is no check that i stays within ev->num_bis
before the array access.
When a controller sends a LE_Create_BIG_Complete event with fewer
bis_handle entries than there are BT_BOUND connections for that BIG,
or with num_bis=0, the loop reads beyond the valid bis_handle[] flex
array into adjacent heap memory. Since the out-of-bounds values
typically exceed HCI_CONN_HANDLE_MAX (0x0EFF), hci_conn_set_handle()
rejects them and the connection remains in BT_BOUND state. The same
connection is then found again by hci_conn_hash_lookup_big_state(),
creating an infinite loop with hci_dev_lock held.
Fix this by terminating the BIG if in case not all BIS could be setup
properly.
Fixes: a0bfde167b ("Bluetooth: ISO: Add support for connecting multiple BISes")
Cc: stable@vger.kernel.org
Signed-off-by: ZhiTao Ou <hkbinbinbin@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add hci_conn_valid() check in create_big_sync() to detect stale
connections before proceeding with BIG creation. Handle the
resulting -ECANCELED in create_big_complete() and re-validate the
connection under hci_dev_lock() before dereferencing, matching the
pattern used by create_le_conn_complete() and create_pa_complete().
Keep the hci_conn object alive across the async boundary by taking
a reference via hci_conn_get() when queueing create_big_sync(), and
dropping it in the completion callback. The refcount and the lock
are complementary: the refcount keeps the object allocated, while
hci_dev_lock() serializes hci_conn_hash_del()'s list_del_rcu() on
hdev->conn_hash, as required by hci_conn_del().
hci_conn_put() is called outside hci_dev_unlock() so the final put
(which resolves to kfree() via bt_link_release) does not run under
hdev->lock, though the release path would be safe either way.
Without this, create_big_complete() would unconditionally
dereference the conn pointer on error, causing a use-after-free
via hci_connect_cfm() and hci_conn_del().
Fixes: eca0ae4aea ("Bluetooth: Add initial implementation of BIS connections")
Cc: stable@vger.kernel.org
Co-developed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
sco_conn_ready calls sleeping functions under conn->lock spinlock.
The critical section can be reduced: conn->hcon is modified only with
hdev->lock held. It is guaranteed to be held in sco_conn_ready, so
conn->lock is not needed to guard it.
Move taking conn->lock after lock_sock(parent). This also follows the
lock ordering lock_sock() > conn->lock elsewhere in the file.
Fixes: 27c24fda62 ("Bluetooth: switch to lock_sock in SCO")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
- more NAN work, mostly complete now (also hwsim)
- more UHR work (e.g. non-primary channel access),
this will continue for a while
- FTM ranging APIs
-----BEGIN PGP SIGNATURE-----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=gvrF
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Lots of new content in cfg80211/mac80211, notably
- more NAN work, mostly complete now (also hwsim)
- more UHR work (e.g. non-primary channel access),
this will continue for a while
- FTM ranging APIs
* tag 'wireless-next-2026-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (70 commits)
wifi: mac80211: explicitly disable FTM responder on AP stop
wifi: iwlwifi: don't blindly start the responder upon BSS_CHANGED_FTM_RESPONDER
wifi: mac80211_hwsim: claim HT STBC capability
wifi: mac80211_hwsim: enable NAN_DATA interface simulation support
wifi: mac80211_hwsim: Support Tx of multicast data on NAN
wifi: mac80211_hwsim: Do not declare support for NDPE
wifi: mac80211_hwsim: Declare support for secure NAN
wifi: mac80211_hwsim: add NAN data path TX/RX support
wifi: mac80211_hwsim: set HAS_RATE_CONTROL when using NAN
wifi: mac80211_hwsim: implement NAN schedule callbacks
wifi: mac80211_hwsim: add NAN PHY capabilities
wifi: mac80211_hwsim: add NAN_DATA interface limits
wifi: mac80211_hwsim: implement NAN synchronization
wifi: mac80211_hwsim: protect tsf_offset using a spinlock
wifi: mac80211_hwsim: only RX on NAN when active on a slot
wifi: mac80211_hwsim: select NAN TX channel based on current TSF
wifi: mac80211_hwsim: limit TX of frames to the NAN DW
wifi: cfg80211: don't allow NAN DATA on multi radio devices
wifi: mac80211: check AP using NPCA has NPCA capability
wifi: mac80211: don't parse full UHR operation from beacons
...
====================
Link: https://patch.msgid.link/20260506111147.224296-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- mac80211
- remove HT NSS validation to work with broken APs
(with a kunit fix now)
- remove 'static' that could cause races
- check station link lookup before further processing
- fix use-after-free due to delete in list iteration
- remove AP station on assoc failures to fix crashes
- ath12k
- fix OF node refcount imbalance
- fix queue flush ("REO update") in MLO
- fix RCU assert
- ath12k:
- fix Kconfig with POWER_SEQUENCING
- fix WMI buffer leaks on error conditions
- don't use uninitialized stack data when processing RSSI events
- fix logic for determining the peer ID in the RX path
- ath5k: fix a potential stack buffer overwrite
- rsi: fix thread lifetime race
- brcmfmac: fix potential UAF
- nl80211:
- stricter permissions/checks for PMK and netns
- fix netlink policy vs. code type confusion
- cw1200: revert a broken locking change
- various fixes to not trust values from firmware
-----BEGIN PGP SIGNATURE-----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=RBbh
-----END PGP SIGNATURE-----
Merge tag 'wireless-2026-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Quite a number of fixes now:
- mac80211
- remove HT NSS validation to work with broken APs
(with a kunit fix now)
- remove 'static' that could cause races
- check station link lookup before further processing
- fix use-after-free due to delete in list iteration
- remove AP station on assoc failures to fix crashes
- ath12k
- fix OF node refcount imbalance
- fix queue flush ("REO update") in MLO
- fix RCU assert
- ath12k:
- fix Kconfig with POWER_SEQUENCING
- fix WMI buffer leaks on error conditions
- don't use uninitialized stack data when processing RSSI events
- fix logic for determining the peer ID in the RX path
- ath5k: fix a potential stack buffer overwrite
- rsi: fix thread lifetime race
- brcmfmac: fix potential UAF
- nl80211:
- stricter permissions/checks for PMK and netns
- fix netlink policy vs. code type confusion
- cw1200: revert a broken locking change
- various fixes to not trust values from firmware
* tag 'wireless-2026-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (25 commits)
wifi: nl80211: re-check wiphy netns in nl80211_prepare_wdev_dump() continuation
wifi: nl80211: require CAP_NET_ADMIN over the target netns in SET_WIPHY_NETNS
wifi: nl80211: fix NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST usage
wifi: mac80211: remove station if connection prep fails
wifi: mac80211: use safe list iteration in radar detect work
wifi: libertas: notify firmware load wait on disconnect
wifi: ath5k: do not access array OOB
wifi: ath12k: fix peer_id usage in normal RX path
wifi: ath12k: initialize RSSI dBm conversion event state
wifi: ath12k: fix leak in some ath12k_wmi_xxx() functions
wifi: cw1200: Revert "Fix locking in error paths"
wifi: mac80211: tests: mark HT check strict
wifi: rsi: fix kthread lifetime race between self-exit and external-stop
wifi: mac80211: drop stray 'static' from fast-RX rx_result
wifi: mac80211: check ieee80211_rx_data_set_link return in pubsta MLO path
wifi: nl80211: require admin perm on SET_PMK / DEL_PMK
wifi: libertas: fix integer underflow in process_cmdrequest()
wifi: b43legacy: enforce bounds check on firmware key index in RX path
wifi: b43: enforce bounds check on firmware key index in b43_rx()
wifi: brcmfmac: Fix potential use-after-free issue when stopping watchdog task
...
====================
Link: https://patch.msgid.link/20260506110325.219675-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The support for NAN DATA was added for single radio devices only. For
example, checking the interface combinations is done for a single radio.
Prevent registration with NAN DATA interface type for multi radio
devices.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260505194607.ff87e6fcff56.If201aa58119d2a6b08223ecb63bc2869f63ff5a1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
NL80211_CMD_GET_SCAN is implemented as a multi-call dumpit. The first
invocation of nl80211_prepare_wdev_dump() validates the requested wdev
against the caller's netns via __cfg80211_wdev_from_attrs(). Subsequent
invocations look up the same wiphy by its global index and do not check
that the wiphy is still in the caller's netns.
Add the same filter to the continuation path. If the wiphy's netns no
longer matches the caller's, return -ENODEV and the netlink dump
machinery terminates the walk cleanly.
Signed-off-by: Maoyi Xie <maoyi.xie@ntu.edu.sg>
Link: https://patch.msgid.link/20260506064854.2207105-3-maoyixie.tju@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
NL80211_CMD_SET_WIPHY_NETNS dispatches with GENL_UNS_ADMIN_PERM, which
verifies that the caller has CAP_NET_ADMIN for the source netns. It
doesn't verify that the caller has CAP_NET_ADMIN over the target netns
selected by NL80211_ATTR_NETNS_FD or NL80211_ATTR_PID.
This diverges from the convention enforced in
net/core/rtnetlink.c::rtnl_get_net_ns_capable():
/* For now, the caller is required to have CAP_NET_ADMIN in
* the user namespace owning the target net ns.
*/
if (!sk_ns_capable(sk, net->user_ns, CAP_NET_ADMIN))
return ERR_PTR(-EACCES);
A user with CAP_NET_ADMIN in their own user namespace can therefore
push a wiphy into an arbitrary netns (including init_net) over which
they have no privilege.
Mirror the rtnetlink convention by requiring CAP_NET_ADMIN in the
target netns before calling cfg80211_switch_netns().
Signed-off-by: Maoyi Xie <maoyi.xie@ntu.edu.sg>
Link: https://patch.msgid.link/20260506064854.2207105-2-maoyixie.tju@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is documented as a u8 and has a policy of NLA_U8, but uses
nla_get_u32() which means it's completely broken on big-endian.
Fix it to use nla_get_u8().
Fixes: 9bb7e0f24e ("cfg80211: add peer measurement with FTM initiator API")
Link: https://patch.msgid.link/20260505113837.260159-2-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If connection preparation fails for MLO connections, then the
interface is completely reset to non-MLD. In this case, we must
not keep the station since it's related to the link of the vif
being removed. Delete an existing station. Any "new_sta" is
already being removed, so that doesn't need changes.
This fixes a use-after-free/double-free in debugfs if that's
enabled, because a vif going from MLD (and to MLD, but that's
not relevant here) recreates its entire debugfs.
Cc: stable@vger.kernel.org
Fixes: 81151ce462 ("wifi: mac80211: support MLO authentication/association with one link")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260505151533.c4e52deb06ad.Iafe56cec7de8512626169496b134bce3a6c17010@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In copy mode TX, xsk_skb_destructor_set_addr() stores the 64-bit
descriptor address into skb_shinfo(skb)->destructor_arg (void *) via a
uintptr_t cast:
skb_shinfo(skb)->destructor_arg = (void *)((uintptr_t)addr | 0x1UL);
On 32-bit architectures uintptr_t is 32 bits, so the upper 32 bits of
the descriptor address are silently dropped. In XDP_ZEROCOPY unaligned
mode the chunk offset is encoded in bits 48-63 of the descriptor
address (XSK_UNALIGNED_BUF_OFFSET_SHIFT = 48), meaning the offset is
lost entirely. The completion queue then returns a truncated address to
userspace, making buffer recycling impossible.
Fix this by handling the 32-bit case directly in
xsk_skb_destructor_set_addr(): when !CONFIG_64BIT, allocate an
xsk_addrs struct (the same path already used for multi-descriptor
SKBs) to store the full u64 address. The existing tagged-pointer logic
in xsk_skb_destructor_is_addr() stays unchanged: slab pointers returned
from kmem_cache_zalloc() are always word-aligned and therefore have
bit 0 clear, which correctly identifies them as a struct pointer
rather than an inline tagged address on every architecture.
Factor the shared kmem_cache_zalloc + destructor_arg assignment into
__xsk_addrs_alloc() and add a wrapper xsk_addrs_alloc() that handles
the inline-to-list upgrade (is_addr check + get_addr + num_descs = 1).
The three former open-coded kmem_cache_zalloc call sites now reduce to
a single call each.
Propagate the -ENOMEM from xsk_skb_destructor_set_addr() through
xsk_skb_init_misc() so the caller can clean up the skb via kfree_skb()
before skb->destructor is installed.
The overhead is one extra kmem_cache_zalloc per first descriptor on
32-bit only; 64-bit builds are completely unchanged.
Closes: https://lore.kernel.org/all/20260419045824.D9E5EC2BCAF@smtp.kernel.org/
Fixes: 0ebc27a4c6 ("xsk: avoid data corruption on cq descriptor number")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260502200722.53960-9-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When xsk_build_skb() / xsk_build_skb_zerocopy() sees the first
continuation descriptor, it promotes destructor_arg from an inlined
address to a freshly allocated xsk_addrs (num_descs = 1). The counter
is bumped to >= 2 only at the very end of a successful build (by calling
xsk_inc_num_desc()).
If the build fails in between (e.g. alloc_page() returns NULL with
-EAGAIN, or the MAX_SKB_FRAGS overflow hits), we jump to free_err, skip
calling xsk_inc_num_desc() to increment num_descs and leave the half-built
skb attached to xs->skb for the app to retry. The skb now has
1) destructor_arg = a real xsk_addrs pointer,
2) num_descs = 1
If the app never retries and just close()s the socket, xsk_release()
calls xsk_drop_skb() -> xsk_consume_skb(), which decides whether to
free xsk_addrs by testing num_descs > 1:
if (unlikely(num_descs > 1))
kmem_cache_free(xsk_tx_generic_cache, destructor_arg);
Because num_descs is exactly 1 the branch is skipped and the
xsk_addrs object is leaked to the xsk_tx_generic_cache slab.
Fix it by directly testing if destructor_arg is still addr. Or else it
is modified and used to store the newly allocated memory from
xsk_tx_generic_cache regardless of increment of num_desc, which we
need to handle.
Closes: https://lore.kernel.org/all/20260419045824.D9E5EC2BCAF@smtp.kernel.org/
Fixes: 0ebc27a4c6 ("xsk: avoid data corruption on cq descriptor number")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260502200722.53960-8-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix it by explicitly adding kfree_skb() before returning back to its
caller.
How to reproduce it in virtio_net:
1. the current skb is the first one (which means no frag and xs->skb is
NULL) and users enable metadata feature.
2. xsk_skb_metadata() returns a error code.
3. the caller xsk_build_skb() clears skb by using 'skb = NULL;'.
4. there is no chance to free this skb anymore.
Closes: https://lore.kernel.org/all/20260415085204.3F87AC19424@smtp.kernel.org/
Fixes: 30c3055f9c ("xsk: wrap generic metadata handling onto separate function")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260502200722.53960-7-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Once xsk_skb_init_misc() has been called on an skb, its destructor is
set to xsk_destruct_skb(), which submits the descriptor address(es) to
the completion queue and advances the CQ producer. If such an skb is
subsequently freed via kfree_skb() along an error path - before the
skb has ever been handed to the driver - the destructor still runs and
submits a bogus, half-initialized address to the CQ.
Postpone the init phase when we believe the allocation of first frag is
successfully completed. Before this init, skb can be safely freed by
kfree_skb().
Closes: https://lore.kernel.org/all/20260419045822.843BFC2BCAF@smtp.kernel.org/
Fixes: c30d084960 ("xsk: avoid overwriting skb fields for multi-buffer traffic")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260502200722.53960-6-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When xsk_build_skb() processes multi-buffer packets in copy mode, the
first descriptor stores data into the skb linear area without adding
any frags, so nr_frags stays at 0. The caller then sets xs->skb = skb
to accumulate subsequent descriptors.
If a continuation descriptor fails (e.g. alloc_page returns NULL with
-EAGAIN), we jump to free_err where the condition:
if (skb && !skb_shinfo(skb)->nr_frags)
kfree_skb(skb);
evaluates to true because nr_frags is still 0 (the first descriptor
used the linear area, not frags). This frees the skb while xs->skb
still points to it, creating a dangling pointer. On the next transmit
attempt or socket close, xs->skb is dereferenced, causing a
use-after-free or double-free.
Fix by using a !xs->skb check to handle first frag situation, ensuring
we only free skbs that were freshly allocated in this call
(xs->skb is NULL) and never free an in-progress multi-buffer skb that
the caller still references.
Closes: https://lore.kernel.org/all/20260415082654.21026-4-kerneljasonxing@gmail.com/
Fixes: 6b9c129c2f ("xsk: remove @first_frag from xsk_build_skb()")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260502200722.53960-5-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a first descriptor (xs->skb == NULL) triggers -EOVERFLOW in
xsk_build_skb_zerocopy() (e.g., MAX_SKB_FRAGS exceeded), the
free_err -EOVERFLOW handler unconditionally dereferences xs->skb
via xsk_inc_num_desc(xs->skb) and xsk_drop_skb(xs->skb), causing
a NULL pointer dereference.
Fix this by guarding the existing xsk_inc_num_desc()/xsk_drop_skb()
calls with an xs->skb check (for the continuation case), and add
an else branch for the first-descriptor case that manually cancels
the one reserved CQ slot and increments invalid_descs by one to
account for the single invalid descriptor.
Fixes: cf24f5a5fe ("xsk: add support for AF_XDP multi-buffer on Tx path")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260502200722.53960-4-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix it by explicitly adding kfree_skb() before returning back to its
caller.
How to reproduce it in virtio_net:
1. the current skb is the first one (which means xs->skb is NULL) and
hit the limit MAX_SKB_FRAGS.
2. xsk_build_skb_zerocopy() returns -EOVERFLOW.
3. the caller xsk_build_skb() clears skb by using 'skb = NULL;'. This
is why bug can be triggered.
4. there is no chance to free this skb anymore.
Note that if in this case the xs->skb is not NULL, xsk_build_skb() will
call xsk_drop_skb(xs->skb) to do the right thing.
Fixes: cf24f5a5fe ("xsk: add support for AF_XDP multi-buffer on Tx path")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260502200722.53960-3-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
skb_checksum_help() is a common helper that writes the folded
16-bit checksum back via skb->data + csum_start + csum_offset,
i.e. it relies on the skb's linear head and fails (with WARN_ONCE
and -EINVAL) when skb_headlen() is 0.
AF_XDP generic xmit takes two very different paths depending on the
netdev. Drivers that advertise IFF_TX_SKB_NO_LINEAR (e.g. virtio_net)
skip the "copy payload into a linear head" step on purpose as a
performance optimisation: xsk_build_skb_zerocopy() only attaches UMEM
pages as frags and never calls skb_put(), so skb_headlen() stays 0
for the whole skb. For these skbs there is simply no linear area for
skb_checksum_help() to write the csum into - the sw-csum fallback is
structurally inapplicable.
The patch tries to catch this and reject the combination with error at
setup time. Rejecting at bind() converts this silent per-packet failure
into a synchronous, actionable -EOPNOTSUPP at setup time. HW csum and
launch_time metadata on IFF_TX_SKB_NO_LINEAR drivers are unaffected
because they do not call skb_checksum_help().
Without the patch, every descriptor carrying 'XDP_TX_METADATA |
XDP_TXMD_FLAGS_CHECKSUM' produces:
1) a WARN_ONCE "offset (N) >= skb_headlen() (0)" from skb_checksum_help(),
2) sendmsg() returning -EINVAL without consuming the descriptor
(invalid_descs is not incremented),
3) a wedged TX ring: __xsk_generic_xmit() does not advance the
consumer on non-EOVERFLOW errors, so the next sendmsg() re-reads
the same descriptor and re-hits the same WARN until the socket
is closed.
Closes: https://lore.kernel.org/all/20260419045822.843BFC2BCAF@smtp.kernel.org/#t
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Fixes: 30c3055f9c ("xsk: wrap generic metadata handling onto separate function")
Link: https://patch.msgid.link/20260502200722.53960-2-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fq_codel_dump_class_stats() acquires qdisc spinlock only when requested
to follow flow->head chain.
As we did in sch_cake recently, add the missing READ_ONCE()/WRITE_ONCE()
annotations.
Fixes: edb09eb17e ("net: sched: do not acquire qdisc spinlock in qdisc/class stats dump")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260504163842.1162001-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEjF9xRqF1emXiQiqU1w0aZmrPKyEFAmn5NYYACgkQ1w0aZmrP
KyG0PQ/+KLaL84yLv5J9GgoXbGkYOicP5UVFMukEDuMWvjpdhBMUBzKqMNJcCiVi
xfWtr9BJoHsXi6U7QJGirvKpyePxL/7xEq1D8PHFZFuHUXTiYXXESOLodBZpqqfw
EmykQSbE7h24qeFmvedgHNGDTfixWqMckH7bujeoOq4xO8WqVlqp/1SVwdpfh6uk
bZacJUDoAKU10RArqVfh+tQrbvVujrM91QOEUKZ7rdYwaDTnC2GH13x6EUngE+L2
8ilTlRpyUq6E4S214ivBRaTZb94skbHjzgkPY6HOYV8+JFX2I9SK+eDEuGpyi7rC
B3WbWXXyrRbTZ0EamzTBpnxrE9Bxj0G2I/9UMAZBtZOGIQld3jhkhV8xwCXdMFL5
QDXbbBnR1X++7UP6YALkvCPY8AQqT0mkfqDDuc+sBF4WS84Pf1FL2eHh192YYtUb
A+H0OHiu/0JHOgskIyhSYGoKt3DPCR0cD2pyzw0xbXV3WEIGKlkaiMo6luL8U5Ni
0zgPujk2Dq3BAP++SwVuFyshxm/2WS18U+6mrRVzDxMl9QBhOXpaXm0DkCgkyhf0
yRZ55J/gde9po+5tqY/Jn6wVNTI1D7bOq0DGDHVb7y9nX/sNaFwR3yz7FW19kEGl
7SEPmhIosbVwIUgexTuR5WL00lqoURBL4LuXf80W52C3Y0EiGHo=
=KQQr
-----END PGP SIGNATURE-----
Merge tag 'nf-26-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
IPVS fixes for net
The following batch contains IPVS fixes for net to address issues
from the latest net-next pull request.
Julian Anastasov made the following summary:
1-3) Fixes for the recently added resizable hash tables
4) dest from trash can be leaked if ip_vs_start_estimator() fails
5) fixed races and locking for the estimation kthreads
6) fix for wrong roundup_pow_of_two() usage in the resizable hash
tables
7-8) v2 of the changes from Waiman Long to properly guard against
the housekeeping_cpumask() updates:
https://lore.kernel.org/netfilter-devel/20260331165015.2777765-1-longman@redhat.com/
I added missing Fixes tag. The original description:
Since commit 041ee6f372 ("kthread: Rely on HK_TYPE_DOMAIN for preferred
affinity management"), the HK_TYPE_KTHREAD housekeeping cpumask may no
longer be correct in showing the actual CPU affinity of kthreads that
have no predefined CPU affinity. As the ipvs networking code is still
using HK_TYPE_KTHREAD, we need to make HK_TYPE_KTHREAD reflect the
reality.
This patch series makes HK_TYPE_KTHREAD an alias of HK_TYPE_DOMAIN
and uses RCU to protect access to the HK_TYPE_KTHREAD housekeeping
cpumask.
Julian plans to post a nf-next patch to limit the connections by using
"conn_max" sysctl. With Simon Horman, they agreed that this is an old
problem that we do not have a limit of connections and it is not a
stopper for this patchset.
* tag 'nf-26-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
sched/isolation: Make HK_TYPE_KTHREAD an alias of HK_TYPE_DOMAIN
ipvs: Guard access of HK_TYPE_KTHREAD cpumask with RCU
ipvs: fix shift-out-of-bounds in ip_vs_rht_desired_size
ipvs: fix races around est_mutex and est_cpulist
ipvs: do not leak dest after get from dest trash
ipvs: fix the spin_lock usage for RT build
ipvs: fix races around the conn_lfactor and svc_lfactor sysctl vars
ipvs: fixes for the new ip_vs_status info
====================
Link: https://patch.msgid.link/20260505001648.360569-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 3cf7203ca6 ("net/tunnel: wait until all sk_user_data
reader finish before releasing the sock") added synchronize_rcu()
in udp_tunnel_sock_release().
This was intended to protect the fast path of a dying vxlan device
from dereferencing vxlan_sock->sock->sk after sock_orphan() has set
sock->sk to NULL.
However, vxlan does not need to access struct socket itself
in the fast path; it only reads struct sock, and struct socket
is only used for tunnel setup and teardown.
This applies to all other UDP tunnel users, and they have been
converted to access struct sock directly.
In addition, each device-specific struct used in their fast paths
is freed after one RCU grace period. Since this occurs after
udp_tunnel_sock_release(), the struct is guaranteed to be freed
after struct udp_sock.
Therefore, synchronize_rcu() in udp_tunnel_sock_release() is
now redundant.
Let's remove it.
Tested:
A script creating/upping vxlan devices in 4000 netns runs 10x
faster with this change. We can see the same improvement with
other UDP tunnel devices as well.
$ cat vxlan.sh
for i in `seq 1 40`
do
(for j in `seq 1 100` ; do
unshare -n bash -c "ip link add vxlan0 type vxlan id 100 local 127.0.0.1 dstport 4789 && ip link set vxlan0 up";
done) &
done
wait
With bpftrace, we can see vxlan_stop() is significantly faster.
bpftrace -e '
kprobe:vxlan_stop {
@start[tid] = nsecs;
}
kretprobe:vxlan_stop /@start[tid]/ {
@duration_us = hist((nsecs - @start[tid]) / 1000);
delete(@start[tid]);
}
END {
printf("\nExecution time of vxlan_stop (us):\n");
}'
Before:
# time ./vxlan.sh // without bpftrace
real 0m50.615s
user 0m8.171s
sys 1m45.101s
@duration_us:
[4K, 8K) 1266 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[8K, 16K) 1957 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[16K, 32K) 764 |@@@@@@@@@@@@@@@@@@@@ |
[32K, 64K) 6 | |
[64K, 128K) 4 | |
[128K, 256K) 3 | |
After:
# time ./vxlan.sh // without bpftrace
real 0m5.247s
user 0m7.956s
sys 1m47.404s
@duration_us:
[16, 32) 3411 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[32, 64) 383 |@@@@@ |
[64, 128) 107 |@ |
[128, 256) 79 |@ |
[256, 512) 16 | |
[512, 1K) 2 | |
[1K, 2K) 2 | |
Next step is to remove another synchronize_net() in vxlan_stop()
and variants in other devices.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-16-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tipc udp_bearer does not need to access struct socket itself in
the fast path; it only reads struct sock, and struct socket is
only used for tunnel setup and teardown.
Let's store struct sock directly in struct udp_bearer.
Note that cleanup_bearer() calls synchronize_net() after
udp_tunnel_sock_release(), so udp_bearer is not freed until
inflight fast paths finish.
Note also that synchronize_rcu() is added in the error path
of tipc_udp_enable() since udp_bearer will be kfree()d
immediately once we remove synchronize_rcu() in
udp_tunnel_sock_release().
This can be later converted to kfree_rcu().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-15-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fou does not need to access struct socket itself in the fast
path; it only reads struct sock, and struct socket is only used
for tunnel setup and teardown.
Let's store struct sock directly in struct fou.
fou_release() frees struct fou with kfree_rcu(), so fou no
longer needs synchronize_rcu() in udp_tunnel_sock_release().
Note that the error path in fou_create() looks buggy; once the
tunnel is set up and fou_add_to_port_list() fails, struct fou
should be freed with kfree_rcu() _after_ udp_tunnel_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-12-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
Even udp_tunnel_notify_{add,del}_rx_port() do not need
struct socket.
Let's change udp_tunnel_notify_{add,del}_rx_port() to take
struct sock instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
Even udp_tunnel_{push,drop}_rx_port() do not need struct socket.
Let's change udp_tunnel_{push,drop}_rx_port() to take struct
sock instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
Even udp_tunnel6_dst_lookup() does not need struct socket.
Let's change udp_tunnel6_dst_lookup() to take struct sock
instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
Even setup_udp_tunnel_sock() does not need struct socket.
Let's change setup_udp_tunnel_sock() to take struct sock
instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
While the UDP tunnel interface accepts struct socket, this
encourages users to store the pointer unnecessarily. This
leads to extra dereferences when accessing struct sock fields
(e.g., sk->sk_user_data instead of sock->sk->sk_user_data).
Furthermore, these dereferences necessitate synchronize_rcu()
in udp_tunnel_sock_release() to protect the fast paths from
sock_orphan() setting sk->sk_socket to NULL.
This overhead can be avoided if users store the struct sock
pointer directly in their private structures.
As a prep, let's change udp_tunnel_sock_release() to take
struct sock instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This basically defaulted to m until recently, since IPV6 defaulted to
m. Since IPV6 was changed to a boolean with a default of y, IPV6_SIT
started defaulting to built-in as well. This results in a surprise
sit0 device by default for defconfig (and defconfig-derived config)
users at boot. For me, this broke an (admittedly non-robust) script.
Preserve the behaviour of most configs by avoiding building this
module, that's probably overall seldom used compared to IPv6 as a
whole, into the kernel.
Fixes: 309b905dee ("ipv6: convert CONFIG_IPV6 to built-in only and clean up Kconfigs")
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260503192515.290900-2-hi@alyssa.is
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A zerocopy send can fail after user pages have been pinned but before
the message is attached to the sending socket.
The purge path currently infers zerocopy state from rm->m_rs, so an
unqueued message can be cleaned up as if it owned normal payload pages.
However, zerocopy ownership is really determined by the presence of
op_mmp_znotifier, regardless of whether the message has reached the
socket queue.
Capture op_mmp_znotifier up front in rds_message_purge() and use it as
the cleanup discriminator. If the message is already associated with a
socket, keep the existing completion path. Otherwise, drop the pinned
page accounting directly and release the notifier before putting the
payload pages.
This keeps early send failure cleanup consistent with the zerocopy
lifetime rules without changing the normal queued completion path.
Fixes: 0cebaccef3 ("rds: zerocopy Tx support.")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Co-developed-by: Xiao Liu <lx24@stu.ynu.edu.cn>
Signed-off-by: Xiao Liu <lx24@stu.ynu.edu.cn>
Signed-off-by: Nan Li <tonanli66@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/d2ea98a6313d5467bac00f7c9fef8c7acddb9258.1777550074.git.tonanli66@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
vports are used concurrently and protected by RCU, so netdev_put()
must happen after the RCU grace period. So, either in an RCU call or
after the synchronize_net(). The rtnl_delete_link() must happen under
RTNL and so can't be executed in RCU context. Calling synchronize_net()
while holding RTNL is not a good idea for performance and system
stability under load in general, so calling netdev_put() in RCU call
is the right solution here.
However,
when the device is deleted, rtnl_unlock() will call netdev_run_todo()
and block until all the references are gone. In the current code this
means that we never reach the call_rcu() and the vport is never freed
and the reference is never released, causing a self-deadlock on device
removal.
Fix that by moving the rcu_call() before the rtnl_unlock(), so the
scheduled RCU callback will be executed when synchronize_net() is
called from the rtnl_unlock()->netdev_run_todo() while the RTNL itself
is already released.
Fixes: 6931d21f87 ("openvswitch: defer tunnel netdev_put to RCU release")
Cc: stable@vger.kernel.org
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260430233848.440994-2-i.maximets@ovn.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a tunnel vport is created it first creates the tunnel device, e.g.,
with geneve_dev_create_fb(), then it calls ovs_netdev_link() to take a
reference and link it to the device that represents openvswitch datapath.
The creation of the device is happening under RTNL, but then RTNL is
released and re-acquired to find the device by name. It is technically
possible for the tunnel device to be re-named or deleted within that
window while RTNL is not held, and some other device created in its
place. This will cause a non-tunnel device to be referenced in the
vport and tunnel-specific functions used on it, e.g. vxlan_get_options()
that directly casts the private netdev data into a struct vxlan_dev
causing an invalid memory access:
BUG: KASAN: slab-use-after-free in vxlan_get_options+0x323/0x3a0
vxlan_get_options+0x323/0x3a0
ovs_vport_cmd_new+0x6e3/0xd30
Fix that by taking a reference to the just created device before
releasing RTNL. This ensures that the device in the vport is always
the one that was just created. The search by name is only needed
for a standard vport-netdev that links pre-existing devices, so that
functionality and device type checks are moved to netdev_create().
It is also awkward that ovs_netdev_link() takes ownership of the vport
and destroys it on failure. It doesn't know the type of the port it is
dealing with, so we need to pass down the indicator that it's a tunnel,
so the link can be properly deleted on failure.
It's possible to refactor the logic to make the ovs_netdev_link() do
only the linking part and let the callers perform a proper destruction,
but it will be much more code for each legacy tunnel port type, so it
is not worth it for the bug fix.
Fixes: 614732eaa1 ("openvswitch: Use regular VXLAN net_device device")
Reported-by: Yuan Tan <tanyuan98@outlook.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Reported-by: Yang Yang <n05ec@lzu.edu.cn>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20260430213349.407991-1-i.maximets@ovn.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, as noted in the comment, ieee80211_uhr_oper_size_ok()
will reject the element coming from the beacon, since it's too
short. However, this is incorrect in general, since the element
is extensible, and such extensions could be present in a beacon,
and then it might pass muster anyway.
Using the frame type we now have in the element parse result,
check that it's not coming from a beacon. The size was already
checked (according to frame type) during parsing.
Link: https://patch.msgid.link/20260428112708.41a7aacdda0c.I0d83c8c9cbee41fd2599480cad815b94867aa1f8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When considering both NPCA and DBE, it can appear that the
NPCA configuration is invalid, e.g. for an 80 MHz BSS channel
with DBE to 160 MHz:
| primary channel
| NPCA primary channel
| |
V V
| p | | n | | | | | |
| BSS channel |
| DBE channel |
Now the NPCA primary channel is in the same half as the primary
channel, and the NPCA puncturing bitmap could be completely
invalid as a puncturing bitmap when considering the overall
channel.
Split out the validity checks from cfg80211_chandef_valid() to
a new cfg80211_chandef_npca_valid() function that just checks
the NPCA configuration against the BSS chandef.
Link: https://patch.msgid.link/20260428112708.1225df131557.If3a6afadcce05d215b72fd82175f72373a0f6d24@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the device is capable, parse the AP chandef with NPCA.
Also advertise the other NPCA operational parameters to the
underlying driver and track if they change (though not with
BSS critical update etc. yet)
Since NPCA can only be enabled when the chanctx isn't shared,
the channel context code needs to clear/set npca.enabled in
the per-link configuration, except during association since
we can't enable NPCA before having completed association. In
this case, set npca.enabled during the association process.
Link: https://patch.msgid.link/20260428112708.eb1e42c0b6d7.I0acd8445d4600363afb8430922531450399d0fab@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When two interfaces share a channel context, disable NPCA
unless both are AP interfaces that require NPCA. This way,
two AP interfaces can have identical chandefs set up and
share the channel context, but any non-APs cannot share a
chanctx with NPCA (they'd almost certainly have different
BSS color.)
This doesn't mean the chanctx cannot be shared but rather
that NPCA will be disabled on the shared channel context.
Link: https://patch.msgid.link/20260428112708.3832e15f4e78.I08a7c7f47d796f4d5d8f9a682c1fba37db2e4cf5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Put the NPCA parameters into a chandef when parsing data from
the AP to validate them using the cfg80211 code, rather than
implementing that in mac80211 directly.
Note that the parameters are not applied yet, since mac80211
doesn't yet have NPCA support.
Link: https://patch.msgid.link/20260428112708.418e86f9444c.I54430f3018e39a26b4252d71000d7bb7dd744331@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add the necessary fields to the chandef data structure
to represent NPCA (the NPCA primary channel and NPCA
punctured/disabled subchannels bitmap), and the code
to check these for validity, compatibility, as well as
allowing it to be passed for AP mode for capable
devices.
Compatibility is assumed to only be the case when it's
actually identical, enabling later management of this
in channel contexts in mac80211 for multiple APs, but
requiring userspace to set up the identical chandef on
all AP interfaces that share a channel (and BSS color.)
Link: https://patch.msgid.link/20260428112708.46f3872aeb35.I85888dab88a6659ba52db4b3318979ca5bcfc0c8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For UHR, multi-link power-management capability lives there, and
so it's needed that hostapd knows what to advertise, and clients
should have it shown to userspace for information.
Repurpose the existing NL80211_ATTR_ASSOC_MLD_EXT_CAPA_OPS by
renaming it to NL80211_ATTR_EXT_MLD_CAPA_AND_OPS (with a define
for compatibility) and advertise the capabilities.
We can also later use the value, if needed, to set per-station
capabilities on STAs added to AP interfaces.
Link: https://patch.msgid.link/20260428110915.e808e70feed6.I378a7c017bfc1ebb072fa8d5d1db2ac9b45596c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since 802.11bn D1.4 the DBE capabilities are after the
PHY capabilities, not between MAC and PHY, adjust the
code accordingly.
Also add a struct for DBE capabilities and use it for
checking the correct length instead of hard-coding the
lengths.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260428103657.b40af50f182d.I75306a092dc2c8a9eb7276160f0b7144b4846d18@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The interface frame queue processing code currently
differentiates many frame types and below those the
interface types, but then falls through to per-type
processing. Move this code to the per-type functions,
creating a new ap.c file that gets relevant code, and
this way reduce the number of non-static symbols.
This also helps with adding more cases for UHR later.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260428103649.c00059e68a07.I2269130278390f534d6051fac424402a854a54aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently there is no way to install an LTF key seed that can be
used in non-trigger-based (NTB) and trigger-based (TB) FTM ranging
to protect NDP frames. Without this, drivers cannot enable PHY-layer
security for peer measurement sessions, leaving ranging measurements
vulnerable to eavesdropping and manipulation.
Introduce NL80211_KEY_LTF_SEED attribute and the dedicated extended
feature flag NL80211_EXT_FEATURE_SET_KEY_LTF_SEED to allow drivers
to advertise and install LTF key seeds via nl80211. The key seed
must be configured beforehand to ensure the peer measurement session
is secure. The driver must advertise both NL80211_EXT_FEATURE_SECURE_LTF
and NL80211_EXT_FEATURE_SET_KEY_LTF_SEED for the key seed installation
to be permitted.
The LTF key seed is pairwise key material and must only be used with
pairwise key type. Reject attempts to use it with other key types.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-13-peddolla.reddy@oss.qualcomm.com
[fix policy coding style]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Proximity detection often does not require detailed ranging
measurements, yet userspace currently receives full FTM results for
every request, causing unnecessary data transfer, host wakeups, and
processing overhead.
Add an optional control to suppress ranging result reporting for
peer-to-peer PD requests. Introduce the
NL80211_PMSR_FTM_REQ_ATTR_PD_SUPPRESS_RESULTS flag; when set with a
PD request, the device may perform the measurements (e.g. when acting
as RSTA) but must not report the measurement results to userspace.
Validate that the flag is only accepted when request_type is set to
NL80211_PMSR_FTM_REQ_TYPE_PD, reject otherwise.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-12-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Devices may support different preamble and bandwidth configurations
for proximity detection (PD) ranging versus standard ranging. Add
separate pd_preambles and pd_bandwidths fields to
cfg80211_pmsr_capabilities to allow drivers to advertise PD-specific
capabilities.
Expose these over nl80211 using new attributes
NL80211_PMSR_FTM_CAPA_ATTR_PD_PREAMBLES and
NL80211_PMSR_FTM_CAPA_ATTR_PD_BANDWIDTHS, advertised only when
pd_support is set.
For PD requests, validate bandwidth and preamble against pd_bandwidths
and pd_preambles. For non-PD requests, validate against the existing
bandwidths and preambles fields.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-11-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Proximity detection applications need to receive measurement results
only when devices cross specific distance boundaries to avoid
unnecessary host wakeups and reduce power consumption.
Introduce configurable distance-based reporting thresholds that
drivers can use to implement selective result reporting. Add ingress
and egress distance parameters allowing applications to specify when
results should be reported as peers cross these boundaries.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-10-peddolla.reddy@oss.qualcomm.com
[remove mm units from variables]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Peer measurement capabilities currently advertise a single maximum
peer count regardless of device role. Some devices support different
peer limits when operating as initiator versus responder.
Add max_peers fields inside the ftm.ista and ftm.rsta sub-structs of
cfg80211_pmsr_capabilities to allow drivers to advertise per-role peer
limits. These limits are generic and not restricted to any specific
ranging type.
Expose these over nl80211 using new NL80211_PMSR_ATTR_MAX_PEER_ISTA_ROLE
and NL80211_PMSR_ATTR_MAX_PEER_RSTA_ROLE attributes inside the
ISTA_CAPS and RSTA_CAPS nested attributes respectively.
When a role limit is advertised, validate the number of peers in the
request separately for each role using the existing rsta flag in the
FTM request, and reject the request if the limit is exceeded.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-9-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Applications need negotiated session parameters to interpret
proximity ranging results and perform post-processing. Currently,
the FTM response lacks LTF repetition counts, time constraints,
spatial stream configuration, and availability window parameters.
Extend the FTM response structure to report these negotiated
parameters, enabling applications to track session configuration
and use them in post-processing to increase ranging precision.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-8-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Enable NTB continuous ranging with configurable timing and measurement
parameters as per the Wi-Fi Alliance specification "Proximity Ranging
(PR) Implementation Consideration Draft 1.9 Rev 1, section 5.3". Add
new FTM request attributes for min/max time between measurements,
nominal time (mandatory for NTB), AW duration, and total measurement
count.
Add NL80211_PMSR_PEER_ATTR_REQ_TYPE attribute using the new
nl80211_peer_measurement_ftm_req_type enum to allow userspace to
specify the ranging request type per peer:
- NL80211_PMSR_FTM_REQ_TYPE_INFRA: STA-to-AP or AP-to-STA ranging
(default if attribute is absent)
- NL80211_PMSR_FTM_REQ_TYPE_PD: peer-to-peer ranging
Validate the request type against the device TYPE_CAPS capabilities
advertised via NL80211_PMSR_FTM_CAPA_ATTR_TYPE_CAPS. Reject PD
requests if the device does not advertise PD support.
Reject PD requests that set trigger-based ranging, as TB ranging is
not compatible with peer-to-peer proximity detection.
Add ftms_per_burst limit of 4 for PD NTB ranging requests.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-7-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Introduce Proximity Detection (PD) capabilities in Peer Measurement
Service (PMSR) as defined in the Wi-Fi Alliance specification
"Proximity Ranging (PR) Implementation Consideration Draft 1.9 Rev 1
section 3.3". This enables devices to advertise peer to peer ranging
support.
Restructure FTM capabilities in cfg80211_pmsr_capabilities to replace
the single support_rsta flag with nested ista and rsta sub-structs,
each carrying per-mode flags for Non-Trigger Based (NTB), Trigger Based
(TB), and EDCA based ranging. This allows drivers to advertise detailed
role and protocol support for both initiator and responder roles.
Add support to pass additional ISTA and RSTA role capabilities to
userspace using new nested ISTA_CAPS and RSTA_CAPS attributes. The
legacy RSTA_SUPPORT flag is retained for backward compatibility.
Add NL80211_PMSR_FTM_CAPA_ATTR_TYPE_CAPS nested attribute using the
nl80211_peer_measurement_ftm_type_capa enum with two sub-flags:
NL80211_PMSR_FTM_TYPE_CAPA_ATTR_INFRA_SUPPORT for STA-to-AP or
AP-to-STA ranging, and NL80211_PMSR_FTM_TYPE_CAPA_ATTR_PD_SUPPORT
for peer-to-peer ranging.
Add CONCURRENT_ISTA_RSTA_SUPPORT as a FTM capability flag indicating
the device can simultaneously act as initiator and responder in a
multi-peer measurement request.
Extend FTM capabilities with antenna configuration fields
(max_no_of_tx_antennas, max_no_of_rx_antennas) for the PR Element
during PASN negotiation, and ranging interval limits
(min_allowed_ranging_interval_edca, min_allowed_ranging_interval_ntb)
to advertise device timing constraints for EDCA and NTB-based ranging.
Update the FTM request validation path in pmsr.c to check RSTA
requests against the per-mode rsta capabilities (NTB, TB, EDCA),
rejecting requests for modes the device does not support.
Co-developed-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-6-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, the proximity detection (PD) interface type has no
start/stop commands defined, preventing user space from
controlling PD operations through the nl80211 interface.
Add NL80211_CMD_START_PD and NL80211_CMD_STOP_PD commands to
allow user space to start and stop a PD interface. Add the
corresponding start_pd and stop_pd operations to cfg80211_ops
and ieee80211_ops, along with nl80211 command handlers, rdev
wrappers, and tracing support. Validate that drivers advertising
PD interface support implement the required operations. Handle
PD interface teardown during device unregistration and when
the interface leaves the network.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-5-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a new wdev-only interface type NL80211_IFTYPE_PD to support
Proximity Detection (PD) operations such as PASN and peer measurement
operations. This interface type operates without a netdev, similar to
P2P_DEVICE and NAN interfaces.
Implement support across cfg80211 and mac80211 layers with PD-specific
checks gated by the NL80211_EXT_FEATURE_SECURE_RTT feature flag,
management frame registration and transmission capabilities, and proper
channel context handling where PD interfaces are excluded from bandwidth
calculations. Update mac80211 to recognize the new interface type in the
relevant paths for this management-only interface.
PD discovery can be performed on any available interface, such as
NL80211_IFTYPE_STATION.
If PD/PMSR uses the MAC address of an existing interface type, such as
NL80211_IFTYPE_STATION, then pairing and measurement shall use that
same interface. If PD/PMSR uses a different MAC address, such as a
random MAC address, then pairing and measurement can be performed on a
new NL80211_IFTYPE_PD interface created with that random MAC address.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-4-peddolla.reddy@oss.qualcomm.com
[fix comment style]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently the remain_on_channel operation does not support
filtering incoming frames by destination MAC address. This
prevents use cases such as PASN authentication in the
responder side that need to receive frames addressed to a
specific MAC during the off-channel period.
Add an rx_addr parameter to the remain_on_channel operation
callback and propagate it through the call chain from nl80211
to driver implementations. Introduce the extended feature
NL80211_EXT_FEATURE_ROC_ADDR_FILTER as a capability gate so
that cfg80211 rejects the request if the driver does not
advertise support for address filtering. Extract the address
from the NL80211_ATTR_MAC attribute when provided in the
netlink message and update the tracing infrastructure to
include the address in remain_on_channel trace events. The
rx_addr parameter is optional and can be NULL, maintaining
backward compatibility with existing drivers.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-3-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The lmr_feedback field is only applicable to TB and non-TB ranging.
Currently, pmsr_parse_ftm() enforces lmr_feedback for all RSTA
requests, incorrectly rejecting valid EDCA-based RSTA requests.
Fix this by limiting the lmr_feedback requirement to TB and non-TB
ranging only.
Fixes: 853800c746 ("wifi: nl80211/cfg80211: support operating as RSTA in PMSR FTM request")
Co-developed-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-2-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A NAN channel can be evacuated, i.e. detached from its chanctx, if all
chanctxs are used by NAN and a chanctx is needed for something else.
For example if the STA interface needs to perform a channel switch.
Implement the evacuation: detach the NAN channel from its chanctx, remove
all the peer NAN channels that were using this chanctx, and update the
driver.
Internally, the NAN channel evacuation will be triggered in the scenario
described above, and API is provided for the driver to also trigger it.
The driver/device is assumed to publish a ULW to notify the peers about
the fact that we won't be present on this NAN channel anymore.
Also export this as an API for the drivers: if a driver has other
resources per channel, it might want to trigger channel evacuation in
order to free up such internal resources for other usages.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504101829.1e1dc40d2f3e.I003fe84dc6373bb9ad55abd7824b9fc21c51203f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In NAN, we don't know on what band the frame will be sent. Therefore we
set info->band to NUM_NL80211_BANDS. However, this leads to out-of-bound
access in ieee80211_add_tx_radiotap_header when we try to access the
sbands array.
Fix it by not accessing the array if the band is NUM_NL80211_BANDS.
This means that we will not report rate info for legacy rate in NAN.
But nobody really cares about it.
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504101829.346c9893d136.I15919027597c04ec35c6217db6e52e2a605e5cfc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
skb->dev may be NULL for frames on non-netdev devices. For example, NAN
device frames after pairing. Fix it.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504072055.1292999-2-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Allow setting the interface MAC address for NAN Device interfaces
and P2P Device interfaces on interface creation.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504101829.d268b245037b.I351e16270c34ee734fed98da25db848211ab7cc2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some frames sent to the NAN device may be protected, such as
protected action frames (in particular protected dual of
public action).
Accept robust management frames except disassoc on the NAN
device, and clean up the code a little bit.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504101829.1900c926c2e8.Ia25b2e82b250058fefa179c39327d9c8b3c3cd62@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Allow TX/RX of action frames (for NAN action frames) over
NAN Data interfaces to support cases where there's a secure
NDP and NAFs may be exchanged over that.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504101829.4ac207c60ebb.Ic4b1c90552497b7ff2616651a408e5fe8bde7b99@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, we store in nan.conf the cluster id that was configured from
upper layer to be used when the device opens a cluster.
But after we joined a cluster, the configured cluster id is no longer
relevant. Particularly, in reconfig we will give the driver the
(possibly) wrong cluster id.
Add an API to be called by the driver when joined a cluster
in which the cluster id will be updated.
Use the locally stored cluster id instead of cfg80211's copy.
Ignore cluster id updates from cfg80211 if we already have one
configured.
Adjust the drivers that use the cfg80211 API
(cfg80211_nan_cluster_joined) directly, otherwise we break functionality
(i.e. accept frame check won't evaluate to true).
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504101829.5dada1b756a4.I0f1060215267fd8aef31afd99f8f42e6fde7f234@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Populate the assoc_encrypted field in cfg80211_rx_assoc_resp_data
for mac80211-based drivers to indicate that the entire (re)association
exchange was encrypted.
When epp_peer is set, mac80211 enforces that unprotected
(Re)Association Request/Response frames are dropped. This ensures that
by the time the (Re)Association Response is processed, the entire
exchange was transmitted encrypted over the air.
Add support to populate assoc_encrypted based on epp_peer flag.
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Link: https://patch.msgid.link/20260504123624.529218-3-kavita.kavita@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In SME-in-driver mode, the driver handles the entire (re)association
exchange. Userspace (e.g., wpa_supplicant) currently has no explicit
indication of whether the (re)association exchange was encrypted,
making it difficult to distinguish EPP (Enhanced Privacy Protection,
IEEE 802.11bi) associations from non-EPP associations.
When (Re)Association frame encryption is used, the (Re)Association
Response frame must contain a Key Delivery element as specified in
IEEE P802.11bi/D4.0, Table 9-65. Userspace must process this element
only when the (Re)Association Response frame is actually encrypted.
Processing it unconditionally for unencrypted frames leads to incorrect
behavior. Without an explicit indication from the driver, userspace
cannot determine whether encryption was used and whether the Key
Delivery element is valid.
Add a new flag attribute NL80211_ATTR_ASSOC_ENCRYPTED and a
corresponding field "assoc_encrypted" in cfg80211_connect_resp_params
to indicate that both the (Re)Association Request and Response frames
are transmitted encrypted over the air.
For mac80211-based drivers, extend cfg80211_rx_assoc_resp_data with
the assoc_encrypted field as well, which is then propagated to
cfg80211_connect_resp_params.
Pass the flag to userspace via NL80211_CMD_CONNECT event.
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Link: https://patch.msgid.link/20260504123624.529218-2-kavita.kavita@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A race condition exists in the NFC LLCP connection state machine where
the connection acceptance packet (CC) can be processed concurrently with
socket release. This can lead to a use-after-free of the socket object.
When nfc_llcp_recv_cc() moves the socket from the connecting_sockets
list to the sockets list, it does so without holding the socket lock.
If llcp_sock_release() is executing concurrently, it might have already
unlinked the socket and dropped its references, which can result in
nfc_llcp_recv_cc() linking a freed socket into the live list.
Fix this by holding lock_sock() during the state transition and list
movement in nfc_llcp_recv_cc(). After acquiring the lock, check if
the socket is still hashed to ensure it hasn't already been unlinked
and marked for destruction by the release path. This aligns the locking
pattern with recv_hdlc() and recv_disc().
Fixes: a69f32af86 ("NFC: Socket linked list")
Signed-off-by: Lee Jones <lee@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260429134115.3558604-2-lee@kernel.org
Signed-off-by: David Heidelberg <david@ixit.cz>
llcp_sock_release() unconditionally unlinks the socket from the local
sockets list. However, if the socket is still in connecting state, it
is on the connecting list.
Fix this by checking the socket state and unlinking from the correct list.
Fixes: b4011239a0 ("NFC: llcp: Fix non blocking sockets connections")
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://patch.msgid.link/20260429134115.3558604-1-lee@kernel.org
Signed-off-by: David Heidelberg <david@ixit.cz>
MSG_SPLICE_PAGES can attach pages from a pipe directly to an skb. TCP
marks such skbs with SKBFL_SHARED_FRAG after skb_splice_from_iter(),
so later paths that may modify packet data can first make a private
copy. The IPv4/IPv6 datagram append paths did not set this flag when
splicing pages into UDP skbs.
That leaves an ESP-in-UDP packet made from shared pipe pages looking
like an ordinary uncloned nonlinear skb. ESP input then takes the no-COW
fast path for uncloned skbs without a frag_list and decrypts in place
over data that is not owned privately by the skb.
Mark IPv4/IPv6 datagram splice frags with SKBFL_SHARED_FRAG, matching
TCP. Also make ESP input fall back to skb_cow_data() when the flag is
present, so ESP does not decrypt externally backed frags in place.
Private nonlinear skb frags still use the existing fast path.
This intentionally does not change ESP output. In esp_output_head(),
the path that appends the ESP trailer to existing skb tailroom without
calling skb_cow_data() is not reachable for nonlinear skbs:
skb_tailroom() returns zero when skb->data_len is nonzero, while ESP
tailen is positive. Thus ESP output will either use the separate
destination-frag path or fall back to skb_cow_data().
Fixes: cac2661c53 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a ("esp6: Avoid skb_cow_data whenever possible")
Fixes: 7da0dde684 ("ip, udp: Support MSG_SPLICE_PAGES")
Fixes: 6d8192bd69 ("ip6, udp6: Support MSG_SPLICE_PAGES")
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Reported-by: Kuan-Ting Chen <h3xrabbit@gmail.com>
Tested-by: Hyunwoo Kim <imv4bel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kuan-Ting Chen <h3xrabbit@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
"tc qdisc show ... handle xxx" filtering can be done by the kernel.
A followup patch can do the same for tcm_parent.
iproute2/tc needs a small companion patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260503114515.2460477-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
psp_dev_rcv() unconditionally removes a fixed PSP_ENCAP_HLEN, even
when psph->hdrlen indicates that the PSP header carries optional
fields. A frame whose PSP header advertises a non-zero VC or any
extension would therefore be silently mis-decapsulated: option bytes
would spill into the inner packet head and downstream parsing would
fail on a corrupted skb.
Compute the full PSP header length from psph->hdrlen, pull the
optional bytes into the linear region, and strip the whole header
when decapsulating. Optional fields (VC, ...) are still ignored,
just discarded with the rest of the header instead of leaking.
crypt_offset and the VIRT flag are intentionally not validated here
- callers know their device's PSP implementation and can decide.
Both in-tree callers gate on hardware-validated PSP, so this is a
correctness fix rather than a reachable corruption path under
current configurations.
Fixes: 0eddb8023c ("psp: provide decapsulation and receive helper for drivers")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Daniel Zahka <daniel.zahka@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Link: https://patch.msgid.link/20260502141945.14484-1-devnexen@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I was mistaken by synchronize_rcu() [1] call in netdev_name_node_alt_destroy(),
giving a false sense of RCU safety at delete times.
We have to use list_del_rcu() to not confuse potential readers
in rtnl_prop_list_size().
[1] This synchronize_rcu() call was later removed in commit 723de3ebef
("net: free altname using an RCU callback").
Fixes: 9f30831390 ("net: add rcu safety to rtnl_prop_list_size()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260502124102.499204-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mptcp_setsockopt_all_sf() was missing a call to sockopt_seq_inc(). This
is required not to cause missing synchronization for newer subflows
created later on.
This helper is called each time a socket option is set on subflows, and
future ones will need to inherit this option after their creation.
Fixes: 51c5fd09e1 ("mptcp: add TCP_MAXSEG sockopt support")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260501-net-mptcp-misc-fixes-7-1-rc3-v1-4-b70118df778e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The skb cb offset containing the timestamp presence flag is cleared
before loading such information. Cache such value before MPTCP CB
initialization.
Fixes: 36b122baf6 ("mptcp: add subflow_v(4,6)_send_synack()")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260501-net-mptcp-misc-fixes-7-1-rc3-v1-3-b70118df778e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When HMAC validation fails on a received ACK + MP_JOIN in
subflow_syn_recv_sock(), the subflow is reset with reason
MPTCP_RST_EPROHIBIT ("Administratively prohibited"). This is
incorrect: HMAC validation failure is an MPTCP protocol-level
error, not an administrative policy denial.
The mirror site on the client, in subflow_finish_connect(), already
uses MPTCP_RST_EMPTCP ("MPTCP-specific error") for the same kind of
HMAC failure on the SYN/ACK + MP_JOIN. Use the same reason on the
server side for symmetry and accuracy.
Suggested-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Fixes: 443041deb5 ("mptcp: fix NULL pointer in can_accept_new_subflow")
Cc: stable@vger.kernel.org
Signed-off-by: Shardul Bankar <shardul.b@mpiricsoftware.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260501-net-mptcp-misc-fixes-7-1-rc3-v1-2-b70118df778e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In subflow_finish_connect(), HMAC validation of the server's HMAC
in SYN/ACK + MP_JOIN increments MPTCP_MIB_JOINACKMAC ("HMAC was
wrong on ACK + MP_JOIN") on failure. The function processes the
SYN/ACK, not the ACK; the matching MPTCP_MIB_JOINSYNACKMAC counter
("HMAC was wrong on SYN/ACK + MP_JOIN") exists but is not
incremented anywhere in the tree.
The mirror site on the server, subflow_syn_recv_sock(), already
uses JOINACKMAC correctly for ACK HMAC failure. Use JOINSYNACKMAC
at the SYN/ACK validation site so each counter reflects the packet
whose HMAC actually failed.
Suggested-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Fixes: fc518953bc ("mptcp: add and use MIB counter infrastructure")
Cc: stable@vger.kernel.org
Signed-off-by: Shardul Bankar <shardul.b@mpiricsoftware.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260501-net-mptcp-misc-fixes-7-1-rc3-v1-1-b70118df778e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
virtio_transport_inc_rx_pkt() checks vvs->rx_bytes + len > vvs->buf_alloc.
virtio_transport_recv_enqueue() skips coalescing for packets
with VIRTIO_VSOCK_SEQ_EOM.
If fed with packets with len == 0 and VIRTIO_VSOCK_SEQ_EOM,
a very large number of packets can be queued
because vvs->rx_bytes stays at 0.
Fix this by estimating the skb metadata size:
(Number of skbs in the queue) * SKB_TRUESIZE(0)
Fixes: 0777061657 ("virtio/vsock: don't use skbuff state to account credit")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Stefano Garzarella <sgarzare@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: "Eugenio Pérez" <eperezma@redhat.com>
Cc: virtualization@lists.linux.dev
Link: https://patch.msgid.link/20260430122653.554058-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In MLD, MRC and QQIC fields are not correctly encoded when
generating query packets. Since the receiver of the query
interprets these fields using the MLDv2 floating-point
decoding logic, any value that exceeds the linear threshold
is incorrectly parsed as an exponential value, leading to
an incorrect interval calculation.
Encode and assign the corresponding protocol fields during
query generation. Introduce the logic to dynamically
calculate the exponent and mantissa using bit-scan (fls).
This ensures MRC (16-bit) and QQIC (8-bit) fields are
properly encoded when transmitting query packets with
intervals that exceed their respective linear thresholds
(32768 for MRD; 128 for QQI).
RFC3810: If Maximum Response Code >= 32768, the Maximum
Response Code field represents a floating-point value as
follows:
0 1 2 3 4 5 6 7 8 9 A B C D E F
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|1| exp | mant |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
RFC3810: If QQIC >= 128, the QQIC field represents a
floating-point value as follows:
0 1 2 3 4 5 6 7
+-+-+-+-+-+-+-+-+
|1| exp | mant |
+-+-+-+-+-+-+-+-+
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ujjal Roy <royujjal@gmail.com>
Link: https://patch.msgid.link/20260502131907.987-5-royujjal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In IGMP, MRC and QQIC fields are not correctly encoded
when generating query packets. Since the receiver of the
query interprets these fields using the IGMPv3 floating-
point decoding logic, any value that exceeds the linear
threshold is incorrectly parsed as an exponential value,
leading to an incorrect interval calculation.
Encode and assign the corresponding protocol fields during
query generation. Introduce the logic to dynamically
calculate the exponent and mantissa using bit-scan (fls).
This ensures MRC and QQIC fields (8-bit) are properly
encoded when transmitting query packets with intervals
that exceed their respective linear threshold value of
128 (for MRT/QQI).
RFC3376: for both MRC and QQIC, values >= 128 represent
the same floating-point encoding as follows:
0 1 2 3 4 5 6 7
+-+-+-+-+-+-+-+-+
|1| exp | mant |
+-+-+-+-+-+-+-+-+
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ujjal Roy <royujjal@gmail.com>
Link: https://patch.msgid.link/20260502131907.987-4-royujjal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename mldv2_mrc() to mldv2_mrd() as it is used to calculate
the Maximum Response Delay from the Maximum Response Code.
Introduce a new API mldv2_qqi() to define the existing
calculation logic of QQI from QQIC. This also organizes
the existing mld_update_qi() API.
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ujjal Roy <royujjal@gmail.com>
Link: https://patch.msgid.link/20260502131907.987-3-royujjal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Get rid of the IGMPV3_MRC macro and use the igmpv3_mrt() API to
calculate the Max Resp Time from the Maximum Response Code.
Similarly, for IGMPV3_QQIC, use the igmpv3_qqi() API to calculate
the Querier's Query Interval from the QQIC field.
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Ujjal Roy <royujjal@gmail.com>
Link: https://patch.msgid.link/20260502131907.987-2-royujjal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert AF_VSOCK's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t. The single
vsock_connectible_getsockopt() callback is shared by both
vsock_stream_ops and vsock_seqpacket_ops, so both proto_ops are
updated to use .getsockopt_iter.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of put_user()/copy_to_user()
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260501-getsock_one-v1-2-810ce23ea70e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert AF_NETLINK's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of put_user()/copy_to_user()
- For NETLINK_LIST_MEMBERSHIPS: walk the groups bitmap and emit each
u32 sequentially via copy_to_iter(), then set opt->optlen to the
total size required (ALIGN(BITS_TO_BYTES(ngroups), sizeof(u32))).
The wrapper writes opt->optlen back to userspace even on partial
failure, preserving the existing API that lets userspace discover
the needed allocation size.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260501-getsock_one-v1-1-810ce23ea70e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
egress_dev() formats np->dev_mac via snprintf() but receives buf as
a bare char *, so it cannot derive the buffer size from the pointer. The
size argument was hardcoded to MAC_ADDR_STR_LEN (3 * ETH_ALEN - 1 = 17),
which is silly wrong in two ways:
1) misleading kernel log output on the MAC-selected target path
(np->dev_name[0] == '\0'); for example "aa:bb:cc:dd:ee:ff doesn't
exist, aborting" was logged as "aa:bb:cc:dd:ee:f doesn't exist,
aborting".
2) the second argument of snprintf is the size of the buffer, not the
size of what you want to write.
Add a bufsz parameter to egress_dev() and pass sizeof(buf) from each
caller, matching the standard snprintf() idiom and removing the
hardcoded size from the helper.
Every caller already declares "char buf[MAC_ADDR_STR_LEN + 1]" so the
formatted MAC continues to fit.
Tested by booting with
netconsole=6665@/aa:bb:cc:dd:ee:ff,6666@10.0.0.1/00:11:22:33:44:55
on a kernel without a matching device. Pre-fix dmesg shows
"aa:bb:cc:dd:ee:f doesn't exist, aborting"; post-fix shows the full
"aa:bb:cc:dd:ee:ff doesn't exist, aborting".
Fixes: f8a10bed32 ("netconsole: allow selection of egress interface via MAC address")
Cc: stable@vger.kernel.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260501-netpoll_snprintf_fix-v1-1-84b0566e6597@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Igor Ushakov reported that unix_gc() could run with gc_in_progress
being false if the work is scheduled while running:
Thread 1 Thread 2 Thread 3
-------- -------- --------
unix_schedule_gc() unix_schedule_gc()
`- if (!gc_in_progress) `- if (!gc_in_progress)
|- gc_in_progress = true |
`- queue_work() |
unix_gc() <----------------/ |
| |- gc_in_progress = true
... `- queue_work()
| |
`- gc_in_progress = false |
|
unix_gc() <---------------------------------------------'
|
... /* gc_in_progress == false */
|
`- gc_in_progress = false
unix_peek_fpl() relies on gc_in_progress not to confuse GC
by MSG_PEEK.
Let's set gc_in_progress to true in unix_gc().
Fixes: 8b90a9f819 ("af_unix: Run GC on only one CPU.")
Reported-by: Igor Ushakov <sysroot314@gmail.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260501073945.1884564-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We soon will no longer hold RTNL in qdisc dumps.
Add READ_ONCE()/WRITE_ONCE() annotations.
Note: taprio already uses RCU to protect most of its fields.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260501064247.2027688-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ip_vs_ctl.c file and the associated ip_vs.h file are the only places
in the kernel where HK_TYPE_KTHREAD cpumask is being retrieved and used.
Now that HK_TYPE_KTHREAD/HK_TYPE_DOMAIN cpumask can be changed at run
time. We need to use RCU to guard access to this cpumask to avoid a
potential UAF problem as the returned cpumask may be freed before it
is being used.
We can replace HK_TYPE_KTHREAD by HK_TYPE_DOMAIN as they are aliases
of each other, but keeping the HK_TYPE_KTHREAD name can highlight the
fact that it is the kthread initiated by ipvs that is being controlled.
Fixes: 03ff735101 ("cpuset: Update HK_TYPE_DOMAIN cpumask from cpuset")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Sashiko reports for races and possible crash around
the usage of est_cpulist_valid and sysctl_est_cpulist.
The problem is that we do not lock est_mutex in some
places which can lead to wrong write ordering and
as result problems when calling cpumask_weight()
and cpumask_empty().
Fix them by moving the est_max_threads read/write under
locked est_mutex. Do the same for one ip_vs_est_reload_start()
call to protect the cpumask_empty() usage of sysctl_est_cpulist.
To remove the chance of deadlock while stopping the
estimation kthreads, keep the data structure for kthread 0
even after last estimator is removed and do not hold mutexes
while stopping this task. Now we will use a new flag 'needed'
to know when kthread 0 should run. The kthreads above 0
do not use mutexes, so stop them under est_mutex because
their kthread data still can be destroyed if they do not
serve estimators. Now all kthreads will be started by
the est_reload_work to properly serialize the stop/start
for kthread 0.
Reduce the use of service_mutex in ip_vs_est_calc_phase()
because under est_mutex we can safely walk est_kt_arr to
stop the kthreads above slot 0.
As ip_vs_stop_estimator() for tot_stats should be called
under service_mutex, do it early in the netns exit path
in ip_vs_flush() to avoid locking the mutex again later.
It still should be called in ip_vs_control_net_cleanup_sysctl()
when we are called during netns init error. Use -2 for ktid
as indicator if estimator was already stopped.
Finally, fix use-after-free for kd->est_row in
ip_vs_est_calc_phase(). est->ktrow should simply switch to
a delay value while estimator is linked to est_temp_list.
Link: https://sashiko.dev/#/patchset/20260331165015.2777765-1-longman%40redhat.com
Link: https://sashiko.dev/#/patchset/20260420171308.87192-1-ja%40ssi.bg
Link: https://sashiko.dev/#/patchset/20260422125123.40658-1-ja%40ssi.bg
Link: https://sashiko.dev/#/patchset/20260424175858.54752-1-ja%40ssi.bg
Link: https://sashiko.dev/#/patchset/20260425103918.7447-1-ja%40ssi.bg
Fixes: f0be83d542 ("ipvs: add est_cpulist and est_nice sysctl vars")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Sashiko warns about leaked dest if ip_vs_start_estimator()
fails in ip_vs_add_dest(). Add ip_vs_trash_put_dest() to
put back the dest into dest trash.
Link: https://sashiko.dev/#/patchset/20260428175725.72050-1-ja%40ssi.bg
Fixes: 705dd34440 ("ipvs: use kthreads for stats estimation")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
syzbot reports for sleeping function called from invalid context [1].
The recently added code for resizable hash tables uses
hlist_bl bit locks in combination with spin_lock for
the connection fields (cp->lock).
Fix the following problems:
* avoid using spin_lock(&cp->lock) under locked bit lock
because it sleeps on PREEMPT_RT
* as the recent changes call ip_vs_conn_hash() only for newly
allocated connection, the spin_lock can be removed there because
the connection is still not linked to table and does not need
cp->lock protection.
* the lock can be removed also from ip_vs_conn_unlink() where we
are the last connection user.
* the last place that is fixed is ip_vs_conn_fill_cport()
where now the cp->lock is locked before the other locks to
ensure other packets do not modify the cp->flags in non-atomic
way. Here we make sure cport and flags are changed only once
if two or more packets race to fill the cport. Also, we fill
cport early, so that if we race with resizing there will be
valid cport key for the hashing. Add a warning if too many
hash table changes occur for our RCU read-side critical
section which is error condition but minor because the
connection still can expire gracefully. Still, restore the
cport to 0 to allow retransmitted packet to properly fill
the cport. Problems reported by Sashiko.
[1]:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 16, name: ktimers/0
preempt_count: 2, expected: 0
RCU nest depth: 3, expected: 3
8 locks held by ktimers/0/16:
#0: ffffffff8de5f260 (local_bh){.+.+}-{1:3}, at: __local_bh_disable_ip+0x3c/0x420 kernel/softirq.c:163
#1: ffffffff8dfc80c0 (rcu_read_lock){....}-{1:3}, at: __local_bh_disable_ip+0x3c/0x420 kernel/softirq.c:163
#2: ffff8880b8826360 (&base->expiry_lock){+...}-{3:3}, at: spin_lock include/linux/spinlock_rt.h:45 [inline]
#2: ffff8880b8826360 (&base->expiry_lock){+...}-{3:3}, at: timer_base_lock_expiry kernel/time/timer.c:1502 [inline]
#2: ffff8880b8826360 (&base->expiry_lock){+...}-{3:3}, at: __run_timer_base+0x120/0x9f0 kernel/time/timer.c:2384
#3: ffffffff8dfc80c0 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:300 [inline]
#3: ffffffff8dfc80c0 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline]
#3: ffffffff8dfc80c0 (rcu_read_lock){....}-{1:3}, at: __rt_spin_lock kernel/locking/spinlock_rt.c:50 [inline]
#3: ffffffff8dfc80c0 (rcu_read_lock){....}-{1:3}, at: rt_spin_lock+0x1e0/0x400 kernel/locking/spinlock_rt.c:57
#4: ffffc90000157a80 ((&cp->timer)){+...}-{0:0}, at: call_timer_fn+0xd4/0x5e0 kernel/time/timer.c:1745
#5: ffffffff8dfc80c0 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:300 [inline]
#5: ffffffff8dfc80c0 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline]
#5: ffffffff8dfc80c0 (rcu_read_lock){....}-{1:3}, at: ip_vs_conn_unlink net/netfilter/ipvs/ip_vs_conn.c:315 [inline]
#5: ffffffff8dfc80c0 (rcu_read_lock){....}-{1:3}, at: ip_vs_conn_expire+0x257/0x2390 net/netfilter/ipvs/ip_vs_conn.c:1260
#6: ffffffff8de5f260 (local_bh){.+.+}-{1:3}, at: __local_bh_disable_ip+0x3c/0x420 kernel/softirq.c:163
#7: ffff888068d4c3f0 (&cp->lock#2){+...}-{3:3}, at: spin_lock include/linux/spinlock_rt.h:45 [inline]
#7: ffff888068d4c3f0 (&cp->lock#2){+...}-{3:3}, at: ip_vs_conn_unlink net/netfilter/ipvs/ip_vs_conn.c:324 [inline]
#7: ffff888068d4c3f0 (&cp->lock#2){+...}-{3:3}, at: ip_vs_conn_expire+0xd4a/0x2390 net/netfilter/ipvs/ip_vs_conn.c:1260
Preemption disabled at:
[<ffffffff898a6358>] bit_spin_lock include/linux/bit_spinlock.h:38 [inline]
[<ffffffff898a6358>] hlist_bl_lock+0x18/0x110 include/linux/list_bl.h:149
CPU: 0 UID: 0 PID: 16 Comm: ktimers/0 Tainted: G W L syzkaller #0 PREEMPT_{RT,(full)}
Tainted: [W]=WARN, [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/18/2026
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
__might_resched+0x329/0x480 kernel/sched/core.c:9162
__rt_spin_lock kernel/locking/spinlock_rt.c:48 [inline]
rt_spin_lock+0xc2/0x400 kernel/locking/spinlock_rt.c:57
spin_lock include/linux/spinlock_rt.h:45 [inline]
ip_vs_conn_unlink net/netfilter/ipvs/ip_vs_conn.c:324 [inline]
ip_vs_conn_expire+0xd4a/0x2390 net/netfilter/ipvs/ip_vs_conn.c:1260
call_timer_fn+0x192/0x5e0 kernel/time/timer.c:1748
expire_timers kernel/time/timer.c:1799 [inline]
__run_timers kernel/time/timer.c:2374 [inline]
__run_timer_base+0x6a3/0x9f0 kernel/time/timer.c:2386
run_timer_base kernel/time/timer.c:2395 [inline]
run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2405
handle_softirqs+0x1de/0x6d0 kernel/softirq.c:622
__do_softirq kernel/softirq.c:656 [inline]
run_ktimerd+0x69/0x100 kernel/softirq.c:1151
smpboot_thread_fn+0x541/0xa50 kernel/smpboot.c:160
kthread+0x388/0x470 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Reported-by: syzbot+504e778ddaecd36fdd17@syzkaller.appspotmail.com
Link: https://sashiko.dev/#/patchset/20260415200216.79699-1-ja%40ssi.bg
Link: https://sashiko.dev/#/patchset/20260420165539.85174-4-ja%40ssi.bg
Link: https://sashiko.dev/#/patchset/20260422135823.50489-4-ja%40ssi.bg
Fixes: 2fa7cc9c70 ("ipvs: switch to per-net connection table")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Sashiko warns that the new sysctls vars can be changed
after the hash tables are destroyed and their respective
resizing works canceled, leading to mod_delayed_work()
being called for canceled works.
Solve this in different ways. conn_tab can be present even
without services and is destroyed only on netns exit, so use
disable_delayed_work_sync() to disable the work instead of
adding more synchronization mechanisms.
As for the svc_table, it is destroyed when the services
are deleted, so we must be sure that netns exit is not
called yet (the check for 'enable') and the work is
not canceled by checking all under same mutex lock.
Also, use WRITE_ONCE when updating the sysctl vars as we
already read them with READ_ONCE.
Link: https://sashiko.dev/#/patchset/20260410112352.23599-1-fw%40strlen.de
Fixes: 8d7de5477e ("ipvs: add conn_lfactor and svc_lfactor sysctl vars")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Sashiko reports some problems for the recently added
/proc/net/ip_vs_status:
* ip_vs_status_show() as a table reader may run long after the
conn_tab and svc_table table are released. While ip_vs_conn_flush()
properly changes the conn_tab_changes counter when conn_tab is removed,
ip_vs_del_service() and ip_vs_flush() were missing such change for
the svc_table_changes counter. As result, readers like
ip_vs_dst_event() and ip_vs_status_show() may continue to use
a freed table after a cond_resched_rcu() call.
* While counting the buckets in ip_vs_status_show() make sure we
traverse only the needed number of entries in the chain. This also
prevents possible overflow of the 'count' variable.
* Add check for 'loops' to prevent infinite loops while restarting
the traversal on table change.
* While IP_VS_CONN_TAB_MAX_BITS is 20 on 32-bit platforms and
there is no risk to overflow when multiplying the number of
conn_tab buckets to 100, prefer the div_u64() helper to make
the following dividing safer.
* Use 0440 permissions for ip_vs_status to restrict the
info only to root due to the exported information for hash
distribution.
Link: https://sashiko.dev/#/patchset/20260410112352.23599-1-fw%40strlen.de
Fixes: 9a9ccef907 ("ipvs: add ip_vs_status info")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The HT check now only applies in strict mode since APs
were found to be broken. Mark it as such.
Fixes: 711a9c018a ("wifi: mac80211: skip ieee80211_verify_sta_ht_mcs_support check in non-strict mode")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
tls_sw_splice_read() uses len when advancing rxm->offset / rxm->full_len
after skb_splice_bits(), rather than copied (the actual number of bytes
successfully spliced into the pipe). When the destination pipe cannot
accept all the requested bytes, splice_to_pipe() returns fewer bytes
than len, and 'len - copied' of data is effectively skipped over.
Fixes: e062fe99cc ("tls: splice_read: fix accessing pre-processed records")
Link: https://patch.msgid.link/20260429222944.2139041-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cake_dump_class_stats() runs without qdisc spinlock being held.
In this first patch, I add READ_ONCE()/WRITE_ONCE() annotations for:
- flow->head
- flow->dropped
- b->backlogs[]
Fixes: 046f6fd5da ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260430061610.3503483-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TP meter sessions remain linked on bat_priv->tp_list after the netlink
request has already finished. When the mesh interface is removed,
batadv_mesh_free() currently tears down the mesh without first draining
these sessions.
A running sender thread or a late incoming tp_meter packet can then keep
processing against a mesh instance which is already shutting down.
Synchronize tp_meter with the mesh lifetime by stopping all active
sessions from batadv_mesh_free() and waiting for sender threads to exit
before teardown continues.
Fixes: 33a3bb4a33 ("batman-adv: throughput meter implementation")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Co-developed-by: Luxing Yin <tr0jan@lzu.edu.cn>
Signed-off-by: Luxing Yin <tr0jan@lzu.edu.cn>
Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Prevent tp_meter from starting new sender or receiver sessions after
mesh_state has left BATADV_MESH_ACTIVE.
Fixes: 33a3bb4a33 ("batman-adv: throughput meter implementation")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Co-developed-by: Luxing Yin <tr0jan@lzu.edu.cn>
Signed-off-by: Luxing Yin <tr0jan@lzu.edu.cn>
Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Fixing an integer overflow present in batadv_iv_ogm_send_to_if. The size
check is done using the int type in batadv_iv_ogm_aggr_packet whereas the
buff_pos variable uses the s16 type. This could lead to an out-of-bound
read.
Cc: stable@vger.kernel.org
Fixes: c6c8fea297 ("net: Add batman-adv meshing protocol")
Signed-off-by: Lyes Bourennani <lbourennani@fuzzinglabs.com>
Signed-off-by: Alexis Pinson <apinson@fuzzinglabs.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Drivers might have error messages to propagate to user space. Propagate
the netlink extack so that they can inform user space in a verbal way of
their limitations.
Make the according transformations to the two users (sja1105 and felix).
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260430114529.3536911-2-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 5e72ce3e39 ("net: ipv6: Use link netns in newlink() of
rtnl_link_ops"), ip6erspan_newlink() correctly resolves the per-netns
ip6gre hash via link_net. ip6erspan_changelink() was not converted in
that series and still uses dev_net(dev), which diverges from the
device's creation netns after IFLA_NET_NS_FD migration.
This re-inserts the tunnel into the wrong per-netns hash. The
original netns keeps a stale entry. When that netns is later
destroyed, ip6gre_exit_rtnl_net() walks the stale entry, producing a
slab-use-after-free reported by KASAN, followed by a kernel BUG at
net/core/dev.c (LIST_POISON1) in unregister_netdevice_many_notify().
Reachable from an unprivileged user namespace (unshare --user
--map-root-user --net).
ip6gre_changelink() earlier in the same file already uses the cached
t->net; only ip6erspan_changelink() has the wrong shape.
Fixes: 2d665034f2 ("net: ip6_gre: Fix ip6erspan hlen calculation")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Maoyi Xie <maoyi.xie@ntu.edu.sg>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260430103318.3206018-1-maoyi.xie@ntu.edu.sg
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When sfb has children (eg qfq qdisc) whose peek() callback is
qdisc_peek_dequeued(), we could get a kernel panic. When the parent of such
qdiscs (eg illustrated in patch #3 as tbf) wants to retrieve an skb from
its child (sfb in this case), it will do the following:
1a. do a peek() - and when sensing there's an skb the child can offer, then
- the child in this case(sfb) calls its child's (qfq) peek.
qfq does the right thing and will return the gso_skb queue packet.
Note: if there wasnt a gso_skb entry then qfq will store it there.
1b. invoke a dequeue() on the child (sfb). And herein lies the problem.
- sfb will call the child's dequeue() which will essentially just
try to grab something of qfq's queue.
[ 127.594489][ T453] KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f]
[ 127.594741][ T453] CPU: 2 UID: 0 PID: 453 Comm: ping Not tainted 7.1.0-rc1-00035-gac961974495b-dirty #793 PREEMPT(full)
[ 127.595059][ T453] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 127.595254][ T453] RIP: 0010:qfq_dequeue+0x35c/0x1650 [sch_qfq]
[ 127.595461][ T453] Code: 00 fc ff df 80 3c 02 00 0f 85 17 0e 00 00 4c 8d 73 48 48 89 9d b8 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 76 0c 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b
[ 127.596081][ T453] RSP: 0018:ffff88810e5af440 EFLAGS: 00010216
[ 127.596337][ T453] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: dffffc0000000000
[ 127.596623][ T453] RDX: 0000000000000009 RSI: 0000001880000000 RDI: ffff888104fd82b0
[ 127.596917][ T453] RBP: ffff888104fd8000 R08: ffff888104fd8280 R09: 1ffff110211893a3
[ 127.597165][ T453] R10: 1ffff110211893a6 R11: 1ffff110211893a7 R12: 0000001880000000
[ 127.597404][ T453] R13: ffff888104fd82b8 R14: 0000000000000048 R15: 0000000040000000
[ 127.597644][ T453] FS: 00007fc380cbfc40(0000) GS:ffff88816f2a8000(0000) knlGS:0000000000000000
[ 127.597956][ T453] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 127.598160][ T453] CR2: 00005610aa9890a8 CR3: 000000010369e000 CR4: 0000000000750ef0
[ 127.598390][ T453] PKRU: 55555554
[ 127.598509][ T453] Call Trace:
[ 127.598629][ T453] <TASK>
[ 127.598718][ T453] ? mark_held_locks+0x40/0x70
[ 127.598890][ T453] ? srso_alias_return_thunk+0x5/0xfbef5
[ 127.599053][ T453] sfb_dequeue+0x88/0x4d0
[ 127.599174][ T453] ? ktime_get+0x137/0x230
[ 127.599328][ T453] ? srso_alias_return_thunk+0x5/0xfbef5
[ 127.599480][ T453] ? qdisc_peek_dequeued+0x7b/0x350 [sch_qfq]
[ 127.599670][ T453] ? srso_alias_return_thunk+0x5/0xfbef5
[ 127.599831][ T453] tbf_dequeue+0x6b1/0x1098 [sch_tbf]
[ 127.599988][ T453] __qdisc_run+0x169/0x1900
The right thing to do in #1b is to grab the skb off gso_skb queue.
This patchset fixes that issue by changing #1b to use qdisc_dequeue_peeked()
method instead.
Fixes: e13e02a3c6 ("net_sched: SFB flow scheduler")
Signed-off-by: Victor Nogueria <victor@mojatatu.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260430152957.194015-3-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When red qdisc has children (eg qfq qdisc) whose peek() callback is
qdisc_peek_dequeued(), we could get a kernel panic. When the parent of such
qdiscs (eg illustrated in patch #3 as tbf) wants to retrieve an skb from
its child (red in this case), it will do the following:
1a. do a peek() - and when sensing there's an skb the child can offer, then
- the child in this case(red) calls its child's (qfq) peek.
qfq does the right thing and will return the gso_skb queue packet.
Note: if there wasnt a gso_skb entry then qfq will store it there.
1b. invoke a dequeue() on the child (red). And herein lies the problem.
- red will call the child's dequeue() which will essentially just
try to grab something of qfq's queue.
[ 78.667668][ T363] KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f]
[ 78.667927][ T363] CPU: 1 UID: 0 PID: 363 Comm: ping Not tainted 7.1.0-rc1-00033-g46f74a3f7d57-dirty #790 PREEMPT(full)
[ 78.668263][ T363] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 78.668486][ T363] RIP: 0010:qfq_dequeue+0x446/0xc90 [sch_qfq]
[ 78.668718][ T363] Code: 54 c0 e8 dd 90 00 f1 48 c7 c7 e0 03 54 c0 48 89 de e8 ce 90 00 f1 48 8d 7b 48 b8 ff ff 37 00 48 89 fa 48 c1 e0 2a 48 c1 ea 03 <80> 3c 02 00 74 05 e8 ef a1 e1 f1 48 8b 7b 48 48 8d 54 24 58 48 8d
[ 78.669312][ T363] RSP: 0018:ffff88810de573e0 EFLAGS: 00010216
[ 78.669533][ T363] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 78.669790][ T363] RDX: 0000000000000009 RSI: 0000000000000004 RDI: 0000000000000048
[ 78.670044][ T363] RBP: ffff888110dc4000 R08: ffffffffb1b0885a R09: fffffbfff6ba9078
[ 78.670297][ T363] R10: 0000000000000003 R11: ffff888110e31c80 R12: 0000001880000000
[ 78.670560][ T363] R13: ffff888110dc4150 R14: ffff888110dc42b8 R15: 0000000000000200
[ 78.670814][ T363] FS: 00007f66a8f09c40(0000) GS:ffff888163428000(0000) knlGS:0000000000000000
[ 78.671110][ T363] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 78.671324][ T363] CR2: 000055db4c6a30a8 CR3: 000000010da67000 CR4: 0000000000750ef0
[ 78.671585][ T363] PKRU: 55555554
[ 78.671713][ T363] Call Trace:
[ 78.671843][ T363] <TASK>
[ 78.671936][ T363] ? __pfx_qfq_dequeue+0x10/0x10 [sch_qfq]
[ 78.672148][ T363] ? __pfx__printk+0x10/0x10
[ 78.672322][ T363] ? srso_alias_return_thunk+0x5/0xfbef5
[ 78.672496][ T363] ? lockdep_hardirqs_on_prepare+0xa8/0x1a0
[ 78.672706][ T363] ? srso_alias_return_thunk+0x5/0xfbef5
[ 78.672875][ T363] ? trace_hardirqs_on+0x19/0x1a0
[ 78.673047][ T363] red_dequeue+0x65/0x270 [sch_red]
[ 78.673217][ T363] ? srso_alias_return_thunk+0x5/0xfbef5
[ 78.673385][ T363] tbf_dequeue.cold+0xb0/0x70c [sch_tbf]
[ 78.673566][ T363] __qdisc_run+0x169/0x1900
The right thing to do in #1b is to grab the skb off gso_skb queue.
This patchset fixes that issue by changing #1b to use qdisc_dequeue_peeked()
method instead.
Fixes: 77be155cba ("pkt_sched: Add peek emulation for non-work-conserving qdiscs.")
Reported-by: Manas <ghandatmanas@gmail.com>
Reported-by: Rakshit Awasthi <rakshitawasthi17@gmail.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260430152957.194015-2-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When using IPv6 ECMP routes, if a netdev listed as a nexthop experiences
a carrier change event (e.g., a bond device generating a NETDEV_CHANGE
event after its slaves go linkdown), established connections utilizing
that nexthop fail to fail over to other available nexthops. Instead,
these connections stall or drop.
This happens because the IPv6 FIB code does not invalidate the socket's
cached destination when a NETDEV_CHANGE event occurs. While
fib6_ifdown() correctly marks the nexthop with RTNH_F_LINKDOWN, it
leaves the route's serial number unchanged. As a result, sockets with a
previously cached dst do not realize the route is no longer viable and
continue to try using the non-functional nexthop.
This behavior contrasts with IPv4, which actively flushes cached
destinations on a NETDEV_CHANGE event (see fib_netdev_event() in
net/ipv4/fib_frontend.c).
Fix this by updating the route serial number in fib6_ifdown() when
setting RTNH_F_LINKDOWN. This invalidates stale cached destinations,
forcing sockets to perform a new route lookup and fail over to a
functioning nexthop.
Fixes: 51ebd31815 ("ipv6: add support of equal cost multipath (ECMP)")
Signed-off-by: Sagarika Sharma <sharmasagarika@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260430200909.527827-2-sharmasagarika@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
My prior patch missed few READ_ONCE()/WRITE_ONCE() annotations.
Fixes: 5154561d9b ("net/sched: sch_pie: annotate data-races in pie_dump_stats()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260430080056.35104-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
segs_in is changed for each incoming packet, including ACK packets.
segs_out is changed for each outgoing packet, including ACK packets.
They belong to tcp_sock_write_txrx group.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260430100021.211139-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These counters are changed whenever sent data is acknowleged.
They do not belong to tcp_sock_write_txrx group, because TCP receivers
do not touch them.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260430100021.211139-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rtnl_fill_vfinfo() declares struct ifla_vf_broadcast on the stack
without initialisation:
struct ifla_vf_broadcast vf_broadcast;
The struct contains a single fixed 32-byte field:
/* include/uapi/linux/if_link.h */
struct ifla_vf_broadcast {
__u8 broadcast[32];
};
The function then copies dev->broadcast into it using dev->addr_len
as the length:
memcpy(vf_broadcast.broadcast, dev->broadcast, dev->addr_len);
On Ethernet devices (the overwhelming majority of SR-IOV NICs)
dev->addr_len is 6, so only the first 6 bytes of broadcast[] are
written. The remaining 26 bytes retain whatever was previously on
the kernel stack. The full struct is then handed to userspace via:
nla_put(skb, IFLA_VF_BROADCAST,
sizeof(vf_broadcast), &vf_broadcast)
leaking up to 26 bytes of uninitialised kernel stack per VF per
RTM_GETLINK request, repeatable.
The other vf_* structs in the same function are explicitly zeroed
for exactly this reason - see the memset() calls for ivi,
vf_vlan_info, node_guid and port_guid a few lines above.
vf_broadcast was simply missed when it was added.
Reachability: any unprivileged local process can open AF_NETLINK /
NETLINK_ROUTE without capabilities and send RTM_GETLINK with an
IFLA_EXT_MASK attribute carrying RTEXT_FILTER_VF. The kernel walks
each VF and emits IFLA_VF_BROADCAST, leaking 26 bytes of stack per
VF per request. Stack residue at this call site can include return
addresses and transient sensitive data; KASAN with stack
instrumentation, or KMSAN, will flag the nla_put() when reproduced.
Zero the on-stack struct before the partial memcpy, matching the
existing pattern used for the other vf_* structs in the same
function.
Fixes: 75345f888f ("ipoib: show VF broadcast address")
Cc: stable@vger.kernel.org
Signed-off-by: Kai Zen <kai.aizen.dev@gmail.com>
Link: https://patch.msgid.link/3c506e8f936e52b57620269b55c348af05d413a2.1777557228.git.kai.aizen.dev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Check mrt->mroute_sk earlier in the function.
- Use sock_queue_rcv_skb_reason() instead of sock_queue_rcv_skb().
- Use sk_skb_reason_drop() instead of kfree_skb().
Note that we return -ENOMEM if sock_queue_rcv_skb_reason() failed,
as the precise error is not really needed for callers.
- Remove one net_warn_ratelimited().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260430074004.4133602-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yiming Qian reported:
<quote>
ipmr_cache_report()` allocates a report skb with `alloc_skb(128,
GFP_ATOMIC)` and appends a `struct igmphdr` using `skb_put()`. In the
non-`IGMPMSG_WHOLEPKT` path it initializes only:
- `igmp->type`
- `igmp->code`
but does not initialize:
- `igmp->csum`
- `igmp->group`
Later, `igmpmsg_netlink_event()` copies the bytes after `sizeof(struct
igmpmsg)` into the `IPMRA_CREPORT_PKT` netlink attribute and emits
`RTM_NEWCACHEREPORT` on `RTNLGRP_IPV4_MROUTE_R`.
As a result, 6 bytes of stale heap data from the skb head are
disclosed to userspace.
</quote>
Let's use skb_put_zero() instead of skb_put() to fix this bug.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260430070611.4004529-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We try to validate during registration that the netdev
has ops if it has features. This is currently somewhat sillily
written because we have a dereference before a NULL check
on the ops struct. Straighten this out.
No functional change intended other than saving ourselves
the very theoretical crash with a bad driver.
Note that we check earlier in the function that either ops
or TLS features are set for the device in question.
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260429213001.1908235-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ASC0
-----END PGP SIGNATURE-----
Merge tag 'nf-26-05-01' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains Netfilter fixes for net:
1) Replace skb_try_make_writable() by skb_ensure_writable() in
nft_fwd_netdev and the flowtable to deal with uncloned packets
having their network header in paged fragments.
2) Drop packet if output device does not exist and ensure sufficient
headroom in nft_fwd_netdev before transmitting the skb.
3) Use the existing dup recursion counter in nft_fwd_netdev for the
neigh_xmit variant, from Weiming Shi.
4) Add .check_hooks interface to x_tables to detach the control plane
hook check based on the match/target configuration. Then, update
nft_compat to use .check_hooks from .validate path, this fixes a
lack of hook validation for several match/targets.
5) Fix incorrect .usersize in xt_CT, from Florian Westphal.
6) Fix a memleak with netdev tables in dormant state,
from Florian Westphal.
7) Several patches to check if the packet is a fragment, then skip
layer 4 inspection, for x_tables and nf_tables; as well as common
nf_socket infrastructure. The xt_hashlimit match drops fragments
to stay consistent with the existing approach when failing to parse
the layer 4 protocol header.
8) Ensure sufficient headroom in the flowtable before transmitting
the skb.
9) Fix the flowtable inline vlan approach for double-tagged vlan:
Reverse the iteration over .encap[] since it represents the
encapsulation as seen from the ingress path. Postpone pushing
layer 2 header so output device is available to calculate needed
headroom. Finally, add and use nf_flow_vlan_push() to fix it.
10) Fix flowtable inline pppoe with GSO packets. Moreover, use
FLOW_OFFLOAD_XMIT_DIRECT to fill up destination hardware
address since neighbour cache does not exist in pppoe.
11) Use skb_pull_rcsum() to decapsulate vlan and pppoe headers, for
double-tagged vlan in particular this should provide some benefits
in certain scenarios.
More notes regarding 9-11):
- sashiko is also signalling to use it for IPIP headers, but that needs
more adjustments such setting skb->protocol after removing the IPIP
header, will follow up in a separated patch.
- I plan to submit selftests to cover double-tagged-vlan. As for pppoe,
it should be possible but that would mandate a few userspace dependencies.
This has been semi-automatically tested by me and reporters describing
broken double-vlan-tagged and pppoe currently in the flowtable.
* tag 'nf-26-05-01' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: flowtable: use skb_pull_rcsum() to pop vlan/pppoe header
netfilter: flowtable: fix inline pppoe encapsulation in xmit path
netfilter: flowtable: fix inline vlan encapsulation in xmit path
netfilter: flowtable: ensure sufficient headroom in xmit path
netfilter: xtables: fix L4 header parsing for non-first fragments
netfilter: nf_tables: skip L4 header parsing for non-first fragments
netfilter: nf_socket: skip socket lookup for non-first fragments
netfilter: nf_tables: fix netdev hook allocation memleak with dormant tables
netfilter: xt_CT: fix usersize for v1 and v2 revision
netfilter: nft_compat: run xt_check_hooks_{match,target}() from .validate
netfilter: x_tables: add .check_hooks to matches and targets
netfilter: nft_fwd_netdev: use recursion counter in neigh egress path
netfilter: nft_fwd_netdev: add device and headroom validate with neigh forwarding
netfilter: replace skb_try_make_writable() by skb_ensure_writable()
====================
Link: https://patch.msgid.link/20260501122237.296262-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The existing alarm_start() interface is replaced with the new
alarm_start_timer() mechanism, which does not longer queue an already
expired timer and returns the state.
Adjust the code to utilize this so it schedules the work in the case that
the timer was already expired. Unlikely to happen as the timeout is at
least a second, but not impossible especially with virtualization.
No functional change intended
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260408114952.604232981@kernel.org
This adjusts the checksum, if required, after pulling the layer 2
header, either the pppoe header or the inner vlan header in the
double-tagged vlan packets.
Fixes: 4cd91f7c29 ("netfilter: flowtable: add vlan support")
Fixes: 72efd585f7 ("netfilter: flowtable: add pppoe support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
There is no point dumping qdiscs for all devices when user space
wants them for a single device:
tc -s -d qdisc show dev eth1
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260430023628.3216283-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use for_each_netdev_dump() instead of for_each_netdev().
This is more scalable, and will ease RCU conversion.
This also offer better behavior when other threads
are adding or deleting netevices concurrently.
This enables dumping qdiscs for a single device
at user space request in the following patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260430023628.3216283-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change tc_fill_qdisc() to return -EMSGSIZE when skb is too small.
Change tc_dump_qdisc_root() to propagate tc_fill_qdisc() error to its callers.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260430023628.3216283-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change tc_fill_tclass() to return -EMSGSIZE when skb is too small.
Change its caller to propagate this error (instead of -EINVAL)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260430023628.3216283-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When neighbor suppression is enabled on a VXLAN port, the bridge is
expected to reply to ARP/NS messages on behalf of remote hosts when both
FDB and neighbor entries exist. This allows the bridge to suppress
flooding of these messages to the VXLAN overlay.
According to RFC 9161 ("Operational Aspects of Proxy ARP/ND in Ethernet
Virtual Private Networks"):
"A PE SHOULD reply to broadcast/multicast address resolution messages,
i.e., ARP Requests, ARP probes, NS messages, as well as DAD NS messages.
An ARP probe is an ARP Request constructed with an all-zero sender IP
address that may be used by hosts for IPv4 Address Conflict Detection as
specified in [RFC5227]".
However, the current implementation unconditionally suppresses ARP probes
and DAD Neighbor Solicitations, which breaks Duplicate Address Detection
(DAD) over EVPN.
For DAD to work correctly over the VXLAN fabric:
- When the bridge does not know the answer:
flood the probe/DAD packet to allow remote VTEPs to respond.
- When the bridge knows the answer:
reply to indicate the address is in use.
Fix by adjusting the early suppression checks to exclude ARP probes and
DAD NS from unconditional suppression.
When replying to a DAD NS, br_nd_send() is adjusted to set the NA
destination to the all-nodes multicast address (ff02::1) and clear the
Solicited flag, in accordance with RFC 4861 section 7.2.4.
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260429062405.1386417-2-danieller@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The alloc_pages() cannot satisfy requests exceeding MAX_PAGE_ORDER,
and attempting such allocations will lead to guaranteed failures
and potential kernel warnings.
For SMCR_PHYS_CONT_BUFS, cap the allocation order to MAX_PAGE_ORDER.
This ensures the attempts to allocate the largest possible physically
contiguous chunk succeed, instead of failing with an invalid order.
This also avoids redundant "try-fail-degrade" cycles in
__smc_buf_create().
For SMCR_MIXED_BUFS, no cap is needed: if the order exceeds
MAX_PAGE_ORDER, alloc_pages() will silently fail (__GFP_NOWARN)
and automatically fall back to virtual memory.
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Link: https://patch.msgid.link/20260429021637.21815-1-alibuda@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipv6_{skip_exthdr,find_hdr}() and ip6_{tnl_parse_tlv_enc_lim,
protocol_deliver_rcu}() iterate over IPv6 extension headers until they
find a non-extension-header protocol or run out of packet data. The
loops have no iteration counter, relying solely on the packet length
to bound them. For a crafted packet with 8-byte extension headers
filling a 64KB jumbogram, this means a worst case of up to ~8k
iterations with a skb_header_pointer call each. ipv6_skip_exthdr(),
for example, is used where it parses the inner quoted packet inside
an incoming ICMPv6 error:
- icmpv6_rcv
- checksum validation
- case ICMPV6_DEST_UNREACH
- icmpv6_notify
- pskb_may_pull() <- pull inner IPv6 header
- ipv6_skip_exthdr() <- iterates here
- pskb_may_pull()
- ipprot->err_handler() <- sk lookup
The per-iteration cost of ipv6_skip_exthdr itself is generally
light, but skb_header_pointer becomes more costly on reassembled
packets: the first ~1232 bytes of the inner packet are in the skb's
linear area, but the remaining ~63KB are in the frag_list where
skb_copy_bits is needed to read data.
Initially, the idea was to add a configurable limit via a new
sysctl knob with default 8, in line with knobs from commit
47d3d7ac65 ("ipv6: Implement limits on Hop-by-Hop and Destination
options"), but two reasons eventually argued against it:
- It adds to UAPI that needs to be maintained forever, and
upcoming work is restricting extension header ordering anyway,
leaving little reason for another sysctl knob
- exthdrs_core.c is always built-in even when CONFIG_IPV6=n,
where struct net has no .ipv6 member, so the read site would
need an ifdef'd fallback to a constant anyway
Therefore, just use a constant (IP6_MAX_EXT_HDRS_CNT). All four
extension header walking functions are now bound by this limit.
Note that the check in ip6_protocol_deliver_rcu() happens right
before the goto resubmit, such that we don't have to have a test
for ipv6_ext_hdr() in the fast-path.
There's an ongoing IETF draft-iurman-6man-eh-occurrences to enforce
IPv6 extension headers ordering and occurrence. The latter also
discusses security implications. As per RFC8200 section 4.1, the
occurrence rules for extension headers provide a practical upper
bound which is 8. In order to be conservative, let's define
IP6_MAX_EXT_HDRS_CNT as 12 to leave enough room for quirky setups.
In the unlikely event that this is still not enough, then we might
need to reconsider a sysctl.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Justin Iurman <justin.iurman@gmail.com>
Link: https://patch.msgid.link/20260429154648.809751-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- mac80211: major rework of station bandwidth handling,
fixing issues with lower capability than AP
- general: cleanups for EMLSR spec issues (drafts differed)
- ath9k: GPIO interface improvements
- ath12k: replace dynamic memory allocation in WMI RX path
-----BEGIN PGP SIGNATURE-----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=cEhV
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-04-30' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Some new content already, notably:
- mac80211: major rework of station bandwidth handling,
fixing issues with lower capability than AP
- general: cleanups for EMLSR spec issues (drafts differed)
- ath9k: GPIO interface improvements
- ath12k: replace dynamic memory allocation in WMI RX path
* tag 'wireless-next-2026-04-30' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (39 commits)
wifi: brcmsmac: phy_lcn: Remove dead code in wlc_lcnphy_radio_2064_channel_tune_4313()
wifi: mac80211: always allow transmitting null-data on TXQs
wifi: mac80211: use kstrtobool_from_user() in debugfs callbacks
wifi: cfg80211: validate cipher suite for NAN Data keys
wifi: nl80211: check link is beaconing for color change
wifi: mac80211: clarify an 802.11 VHT spec reference
wifi: mac80211: fix per-station PHY capability bandwidth
wifi: mac80211: clarify per-STA bandwidth handling
wifi: nl80211: always validate AP operation/PHY regulatory
wifi: cfg80211: provide HT/VHT operation for AP beacon
wifi: nl80211: reject too short HT/VHT/HE/EHT capability/operation
wifi: cfg80211: move AP HT/VHT/... operation to beacon info
wifi: nl80211: reject beacons with bad HE operation
wifi: cfg80211: remove HE/SAE H2E required fields
wifi: mac80211: remove ieee80211_sta_cur_vht_bw()
wifi: mac80211: clean up ieee80211_sta_cap_rx_bw()
wifi: mac80211: clean up initial STA NSS/bandwidth handling
wifi: mac80211: clean up STA NSS handling
wifi: mac80211: simplify ieee80211_sta_rx_bw_to_chan_width()
wifi: nl80211: document channel opmode change channel width
...
====================
Link: https://patch.msgid.link/20260430120304.249081-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Address two issues in the inline pppoe encapsulation:
- Add needs_gso_segment flag to segment PPPoE packets in software
given that there is no GSO support for this.
- Use FLOW_OFFLOAD_XMIT_DIRECT since neighbour cache is not available
in point-to-point device, use the hardware address that is obtained
via flowtable path discovery (ie. fill_forward_path).
Fixes: 18d27bed08 ("netfilter: flowtable: inline pppoe encapsulation in xmit path")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Several issues in the inline vlan support:
- The layer 2 encapsulation representation in the tuple takes encap[0] as
the outer header and encap[1] as the inner header as seen from the ingress
path. Reverse the encap loop to push first the inner then the outer vlan
header.
- Postpone pushing the layer 2 header once destination device is known.
This allows to calculate the needed hearoom via LL_RESERVED_SPACE to
accommodate the layer 2 headers.
- Add and use nf_flow_vlan_push() as suggested by Eric Woudstra, this
is a simplified version of skb_vlan_push() for egress path only.
Fixes: c653d5a78f ("netfilter: flowtable: inline vlan encapsulation in xmit path")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We're currently dumping skb info in our fragment input test, which makes
interpreting the TAP test output a bit awkward.
Remove the skb dumps.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260429-dev-mctp-test-skb-dump-v1-1-13fd5789ef71@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In our test cases, we typically feed a packet sequence into the routing
code, then inspect the device's TXed skbs to assert specific behaviours.
Using dev_queue_xmit() for our TX path introduces a fair bit of
complexity between the test packet sequence and the test device's
ndo_start_xmit callback; which may mean that the skbs have not hit the
device at the point we're inspecting the TXed skb list.
Use dev_direct_xmit instead, as we want a direct a path as possible
here, and the test dev does not need any queueing, scheduling or flow
control.
Fixes: 6ab578739a ("net: mctp: test: move TX packetqueue from dst to dev")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202604281320.525eee17-lkp@intel.com
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260429-dev-mctp-test-fixes-v1-2-1127b7425809@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Invalid sockaddr padding will cause bind() to fail; ensure we have a
zeroed address in the testcase.
Fixes: 0d8647bc74 ("net: mctp: don't require a route for null-EID ingress")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260429-dev-mctp-test-fixes-v1-1-1127b7425809@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Check for headroom and call skb_expand_head() like in the IP output
path to ensure there is sufficient headroom for the mac header when
forwarding this packet as suggested by sashiko.
Fixes: b5964aac51 ("netfilter: flowtable: consolidate xmit path")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Multiple targets and matches relies on L4 header to operate. For
fragmented packets, every fragment carries the transport protocol
identifier, but only the first fragment contains the L4 header.
As the 'raw' table can be configured to run at priority -450 (before
defragmentation at -400), the target/match can be reached before
reassembly. In this case, non-first fragments have their payload
incorrectly parsed as a TCP/UDP header. This would be of course a
misconfiguration scenario. In most of the cases this just lead to a
unreliable behavior for fragmented traffic.
Add a fragment check to ensure target/match only evaluates unfragmented
packets or the first fragment in the stream.
Fixes: 902d6a4c2a ("netfilter: nf_defrag: Skip defrag if NOTRACK is set")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The tproxy, osf and exthdr (SCTP) expressions rely on the presence of
transport layer headers to perform socket lookups, fingerprint matching,
or chunk extraction. For fragmented packets, while the IP protocol
remains constant across all fragments, only the first fragment contains
the actual L4 header.
The expressions could be attached to a chain with a priority lower than
-400, bypassing defragmentation. Or could be used in stateless
environments where defragmentation is not happening at all. This could
result in garbage data being used for the matching.
Add a check for pkt->fragoff so only unfragmented packets or the first
fragment is processed.
Fixes: 133dc203d7 ("netfilter: nft_exthdr: Support SCTP chunks")
Fixes: 4ed8eb6570 ("netfilter: nf_tables: Add native tproxy support")
Fixes: b96af92d6e ("netfilter: nf_tables: implement Passive OS fingerprint module in nft_osf")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Both nft_socket and xt_socket relies on L4 headers to perform socket
lookup in the slow path. For fragmented packets, while the IP protocol
remains constant across all fragments, only the first fragment contains
the actual L4 header.
As the expression/match could be attached to a chain with a priority
lower than -400, it could bypass defragmentation.
Add a check for fragmentation in the lookup functions directly so the
problem is handled for both nft_socket and xt_socket at the same time.
In addition, future users of the functions would not need to care about
this.
Fixes: 902d6a4c2a ("netfilter: nf_defrag: Skip defrag if NOTRACK is set")
Fixes: 554ced0a6e ("netfilter: nf_tables: add support for native socket matching")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When tls_set_device_offload_rx() fails at tls_dev_add(), the error path
calls tls_sw_free_resources_rx() to clean up the SW context that was
initialized by tls_set_sw_offload(). This function calls
tls_sw_release_resources_rx() (which stops the strparser via
tls_strp_stop()) and tls_sw_free_ctx_rx() (which kfrees the context),
but never frees the anchor skb that was allocated by alloc_skb(0) in
tls_strp_init().
Note that tls_sw_free_resources_rx() is exclusively used for this
"failed to start offload" code path, there's no other caller.
The leak did not exist before commit 84c61fe1a7 ("tls: rx: do not use
the standard strparser"), because the standard strparser doesn't try
to pre-allocate an skb.
The normal close path in tls_sk_proto_close() handles cleanup by calling
tls_sw_strparser_done() (which calls tls_strp_done()) after dropping
the socket lock, because tls_strp_done() does cancel_work_sync() and
the strparser work handler takes the socket lock.
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260428231559.1358502-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
tcp_sigpool is no longer used. It existed only as a workaround for
issues in the design of the crypto_ahash API, which have been avoided by
switching to the much easier-to-use library APIs instead. Remove it.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260427172727.9310-6-ebiggers@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since tcp-ao now uses the crypto library API instead of crypto_ahash,
and MACs and keys now have a statically-known maximum size, many tcp-ao
functions can no longer fail. Propagate this change up into the return
types of various functions.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260427172727.9310-5-ebiggers@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that the maximum MAC and traffic key lengths are statically-known
small values, allocate MACs and traffic keys on the stack instead of
with kmalloc. This eliminates multiple failure-prone GFP_ATOMIC
allocations.
Note that some cases such as tcp_ao_prepare_reset() are left unchanged
for now since they would require slightly wider changes.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260427172727.9310-4-ebiggers@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently the kernel's TCP-AO implementation does the MAC and KDF
computations using the crypto_ahash API. This API is inefficient and
difficult to use, and it has required extensive workarounds in the form
of per-CPU preallocated objects (tcp_sigpool) to work at all.
Let's use lib/crypto/ instead. This means switching to straightforward
stack-allocated structures, virtually addressed buffers, and direct
function calls. It also means removing quite a bit of error handling.
This makes TCP-AO quite a bit faster.
This also enables many additional cleanups, which later commits will
handle: removing tcp-sigpool, removing support for crypto_tfm cloning,
removing more error handling, and replacing more dynamically-allocated
buffers with stack buffers based on the now-statically-known limits.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260427172727.9310-3-ebiggers@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
RFC 5926 (https://datatracker.ietf.org/doc/html/rfc5926) specifies the
use of AES-128-CMAC and HMAC-SHA1 with TCP-AO. This includes a
specification for how traffic keys shall be derived for each algorithm.
Support for any other algorithms with TCP-AO isn't standardized, though
an expired Internet Draft (a work-in-progress document, not a standard)
from 2019 does propose adding HMAC-SHA256 support:
https://datatracker.ietf.org/doc/html/draft-nayak-tcp-sha2-03
Since both documents specify the KDF for each algorithm individually, it
isn't necessarily clear how any other algorithm should be integrated.
Nevertheless, the Linux implementation of TCP-AO allows userspace to
specify the MAC algorithm as a string tcp_ao_add::alg_name naming either
"cmac(aes128)" or an arbitrary algorithm in the crypto_ahash API. The
set of valid strings is undocumented. The implementation assumes that
"cmac(aes128)" is the only algorithm that requires an entropy extraction
step and that all algorithms accept keys with length equal to the
untruncated MAC; thus, arbitrary HMAC algorithms probably do work, but
some other MAC algorithms like AES-256-CMAC have never actually worked.
Unfortunately, this undocumented string allows many obsolete, insecure,
or redundant algorithms. For example, "hmac(md5)" and the
non-cryptographic "crc32" are accepted. It also ties the implementation
to crypto_ahash and requires that most memory be dynamically allocated,
making the implementation unnecessarily complex and inefficient. Still
furthermore, this implementation requires the crypto API to support
"transformation cloning", whose only user is this feature.
Fortunately, it's very likely that only a few algorithms are actually
used in practice. Let's restrict the set of allowed algorithms to
"cmac(aes128)" (or "cmac(aes)" with keylen=16), "hmac(sha1)", and
"hmac(sha256)". The first two are the actually standard ones, while
HMAC-SHA256 seems like a reasonable algorithm to continue supporting as
a Linux extension, considering the Internet Draft for it and the fact
that SHA-256 is the usual choice of upgrade from the outdated SHA-1.
If any other algorithm ever turns out to be needed, e.g. HMAC-SHA512, it
can of course be (re-)added in library form. However, note that the TCP
options space limits TCP-AO MACs to 20 bytes (160 bits) anyway, which
limits the potential benefit of any further upgrade to the algorithm.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260427172727.9310-2-ebiggers@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
sashiko says:
could the related code in __nf_tables_abort() leak the struct nft_hook objects when the table is dormant?
In __nf_tables_abort(), when rolling back a NEWCHAIN transaction that
updates hooks, the code conditionally unregisters and frees the hooks only
if the table is not dormant [..]
if (!(table->flags & NFT_TABLE_F_DORMANT)) {
nft_netdev_unregister_hooks(net,
&nft_trans_chain_hooks(trans),
true);
}
...
nft_trans_destroy(trans);
Unfortunately netdev family mixes hook registration and allocation.
Push table struct down and only check for the flag to unregister.
Fixes: 216e7bf740 ("netfilter: nf_tables: skip netdev hook unregistration if table is dormant")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
While resurrecting the conntrack-tool test cases I found following bug:
In:
iptables -I OUTPUT -t raw -p 13 -j CT --timeout test-generic
Out:
[0:0] -A OUTPUT -p 13 -j CT --timeout test
Data after first four bytes of the timeout policy name is never
copied to userspace because its treated as kernel-only.
Fixes: ec23189049 ("xtables: extend matches and targets with .usersize")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Several matches and one target check that the hook is correct from
checkentry(), however, the basechain is only available from
nft_table_validate().
This patch uses xt_check_hooks_{match,target}() from the nft_compat
expression .validate path.
This patch sets the table in the nft_ctx struct in nft_table_validate()
which is required by this patch.
Based on patch from Florian Westphal.
Fixes: 0ca743a559 ("netfilter: nf_tables: add compatibility layer for x_tables")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add a new .check_hooks interface for checking if the match/target is
used from the validate hook according to its configuration.
Move existing conditional hook check based on the match/target
configuration from .checkentry to .check_hooks for the following
matches/targets:
- addrtype
- devgroup
- physdev
- policy
- set
- TCPMSS
- SET
This is a preparation patch to fix nft_compat, not functional changes
are intended.
Based on patch from Florian Westphal.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When page_pool_create_percpu() fails on page_pool_list(), it falls
through to its err_uninit: label, which calls page_pool_uninit().
At that point page_pool_init() has already taken two references
when the user requested PP_FLAG_ALLOW_UNREADABLE_NETMEM:
pool->mp_ops->init(pool)
static_branch_inc(&page_pool_mem_providers);
Neither is undone by page_pool_uninit(); both are only undone by
__page_pool_destroy() (success-side teardown). The error path
therefore leaks the per-provider reference taken by mp_ops->init
(io_zcrx_ifq->refs in the io_uring zcrx provider, the dmabuf
binding refcount in the devmem provider) plus one increment of
the page_pool_mem_providers static branch on every failure of
xa_alloc_cyclic() inside page_pool_list().
The leaked io_zcrx_ifq->refs in turn pins everything
io_zcrx_ifq_free() would release on cleanup: ifq->user (uid),
ifq->mm_account (mmdrop), ifq->dev (device refcount),
ifq->netdev_tracker (netdev refcount), and the rbuf region.
The leaked static branch increment forces all subsequent
page_pool_alloc_netmems() and page_pool_return_page() callers to
take the slow mp_ops branch for the lifetime of the kernel.
Reachable via the io_uring zcrx path:
io_uring_register(IORING_REGISTER_ZCRX_IFQ) /* CAP_NET_ADMIN */
-> __io_uring_register
-> io_register_zcrx
-> zcrx_register_netdev
-> netif_mp_open_rxq
-> driver ndo_queue_mem_alloc
-> page_pool_create_percpu
-> page_pool_init succeeds (mp_ops->init runs, branch++)
-> page_pool_list fails (xa_alloc_cyclic -ENOMEM)
-> goto err_uninit <-- leak
The same shape applies to the devmem dmabuf provider via
mp_dmabuf_devmem_init()/mp_dmabuf_devmem_destroy().
Restore the cleanup symmetry by moving the mp_ops->destroy() and
static_branch_dec() calls out of __page_pool_destroy() and into
page_pool_uninit(), so page_pool_uninit() is again the strict
inverse of page_pool_init(). page_pool_uninit() has only two
callers (the err_uninit: path and __page_pool_destroy()), so this
preserves the single-call invariant on the success path while
fixing the err path. The error path of page_pool_init() itself
still skips the mp_ops cleanup correctly: mp_ops->init is the
last action that takes a reference before page_pool_init() returns
0, so when it returns an error neither the refcount nor the static
branch has been touched.
Triggering the bug requires xa_alloc_cyclic() to fail with -ENOMEM,
which under normal GFP_KERNEL retry behaviour is rare. It is
deterministic under CONFIG_FAULT_INJECTION with fail_page_alloc /
xa fault injection, or under sustained memory pressure. The leak
is silent: there is no warning, and the released kernel build
continues running with a permanently-incremented static branch.
Fixes: 0f92140468 ("memory-provider: dmabuf devmem memory provider")
Signed-off-by: Hasan Basbunar <basbunarhasan@gmail.com>
Link: https://patch.msgid.link/20260428170739.34881-1-basbunarhasan@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
VMBUS ring buffers must be page aligned. Therefore, the current value of
24K presents a challenge on ARM64 kernels (with 64K pages). So, use
VMBUS_RING_SIZE() to ensure they are always aligned and large enough to
hold all of the relevant data.
Cc: stable@vger.kernel.org
Fixes: 77ffe33363 ("hv_sock: use HV_HYP_PAGE_SIZE for Hyper-V communication")
Tested-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260428125339.13963-1-hamzamahfooz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
psp_dev_rcv() is called from the NIC driver's RX completion path
before the frame reaches ip_rcv_core(), so the IP header has not
been validated in SW, yet. We expect that the device has done
all this validation, but let's also add the SW checks, to avoid
surprises.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260428205352.1247325-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In psp_dev_create(), the DEV_ADD_NTF netlink notification is sent
before the device is published to the netdev via rcu_assign_pointer().
IIRC this is intentional because a single PSP device is expected
to be shared with multiple netdevs. So we are trying to default to
not having the netdev info. We can change it if someone complains
but for now just add a comment that it's intentional.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260428205352.1247325-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Code checkers / AI scans will complain that we have already modified
the packet by the time we realize that protocol is not IP.
Move the skb->protocol check to before skb_push()/memmove() so that
the skb is not left in a corrupted state when the function returns
false for an unsupported protocol. psp_dev_rcv() follows similar
pattern.
Today this path is unreachable because both in-tree callers (mlx5 and
netdevsim) only reach psp_dev_encapsulate() from TCP socket TX paths
where skb->protocol is always ETH_P_IP or ETH_P_IPV6, and both drop
the skb on a false return, anyway.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260428205352.1247325-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
qstats_overlimit_inc() is only used to increment per cpu overlimits.
It can use this_cpu_inc() to avoid this_cpu_ptr() extra cost
and avoid potential store tearing.
Change qstats_overlimit_inc() name and its argument type.
Also add a WRITE_ONCE() in qdisc_qstats_overlimit() to prevent
store tearing.
$ scripts/bloat-o-meter -t vmlinux.0 vmlinux.1
add/remove: 0/0 grow/shrink: 0/7 up/down: 0/-91 (-91)
Function old new delta
tcf_skbmod_act 772 764 -8
tcf_police_act 733 725 -8
tcf_gate_act 318 310 -8
tcf_pedit_act 1295 1284 -11
tcf_mirred_to_dev 1126 1114 -12
tcf_ife_act 1077 1061 -16
tcf_mirred_act 1324 1296 -28
Total: Before=24274627, After=24274536, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260428070919.3109557-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit db359fccf2 ("mm: introduce a new page type for page pool in
page type") added a page_type field to struct net_iov at the same
offset as struct page::page_type, so that page_pool_set_pp_info() can
call __SetPageNetpp() uniformly on both pages and net_iovs.
The page-type API requires the field to hold the UINT_MAX "no type"
sentinel before a type can be set; for real struct page that invariant
is established by the page allocator on free. struct net_iov is not
allocated through the page allocator, so the field is left as zero
(io_uring zcrx, which uses __GFP_ZERO) or as slab garbage (devmem,
which uses kvmalloc_objs() without zeroing). When the page pool then
calls page_pool_set_pp_info() on a freshly-bound niov,
__SetPageNetpp()'s VM_BUG_ON_PAGE(page->page_type != UINT_MAX) fires
and the kernel BUGs. Triggered in selftests by io_uring zcrx setup
through the fbnic queue restart path:
kernel BUG at ./include/linux/page-flags.h:1062!
RIP: 0010:page_pool_set_pp_info (./include/linux/page-flags.h:1062
net/core/page_pool.c:716)
Call Trace:
<TASK>
net_mp_niov_set_page_pool (net/core/page_pool.c:1360)
io_pp_zc_alloc_netmems (io_uring/zcrx.c:1089 io_uring/zcrx.c:1110)
fbnic_fill_bdq (./include/net/page_pool/helpers.h:160
drivers/net/ethernet/meta/fbnic/fbnic_txrx.c:906)
__fbnic_nv_restart (drivers/net/ethernet/meta/fbnic/fbnic_txrx.c:2470
drivers/net/ethernet/meta/fbnic/fbnic_txrx.c:2874)
fbnic_queue_start (drivers/net/ethernet/meta/fbnic/fbnic_txrx.c:2903)
netdev_rx_queue_reconfig (net/core/netdev_rx_queue.c:137)
__netif_mp_open_rxq (net/core/netdev_rx_queue.c:234)
io_register_zcrx (io_uring/zcrx.c:818 io_uring/zcrx.c:903)
__io_uring_register (io_uring/register.c:931)
__do_sys_io_uring_register (io_uring/register.c:1029)
do_syscall_64 (arch/x86/entry/syscall_64.c:63
arch/x86/entry/syscall_64.c:94)
</TASK>
The same path is reachable through devmem dmabuf binding via
netdev_nl_bind_rx_doit() -> net_devmem_bind_dmabuf_to_queue().
Add a net_iov_init() helper that stamps ->owner, ->type and the
->page_type sentinel, and use it from both the devmem and io_uring
zcrx niov init loops.
Fixes: db359fccf2 ("mm: introduce a new page type for page pool in page type")
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Acked-by: Byungchul Park <byungchul@sk.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/20260428025320.853452-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nft_fwd_neigh can be used in egress chains (NF_NETDEV_EGRESS). When the
forwarding rule targets the same device or two devices forward to each
other, neigh_xmit() triggers dev_queue_xmit() which re-enters
nf_hook_egress(), causing infinite recursion and stack overflow.
Move the nf_get_nf_dup_skb_recursion() accessor and NF_RECURSION_LIMIT
to the shared header nf_dup_netdev.h as a static inline, so that
nft_fwd_netdev can use the recursion counter directly without exported
function call overhead. Guard neigh_xmit() with the same recursion
limit already used in nf_do_netdev_egress().
[ Updated to cache the nf_get_nf_dup_skb_recursion pointer. --pablo ]
Fixes: f87b9464d1 ("netfilter: nft_fwd_netdev: Support egress hook")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The ttl field has been decremented already and evaluation of this rule
would proceed, just drop this packet instead if there is no destination
device to forwards this packet. This is exactly what nf_dup already does
in this case.
Moreover, check for headroom and call skb_expand_head() like in the IP
output path to ensure there is sufficient headroom when forwarding this
via neigh_xmit().
Fixes: d32de98ea7 ("netfilter: nft_fwd_netdev: allow to forward packets via neighbour layer")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
skb_try_make_writable() only works on clones and uncloned packets might
have their network header in paged fragments.
nft_fwd needs to work for the ingress and egress hooks, but the egress
hook where skb->data points to the mac header, use skb_network_offset()
to include the mac header. The flowtable is fine since it already uses
the transport offset.
Fixes: d32de98ea7 ("netfilter: nft_fwd_netdev: allow to forward packets via neighbour layer")
Fixes: 7d20868717 ("netfilter: nf_flow_table: move ipv4 offload hook code to nf_flow_table")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
KASAN reproduces a slab-use-after-free in __xfrm_state_delete()'s
hlist_del_rcu calls under syzkaller load on linux-6.12.y stable
(reproduced on 6.12.47, also reachable via the same code path on
torvalds/master and on the ipsec tree). Nine unique signatures cluster
in the xfrm_state lifecycle, the load-bearing one being:
BUG: KASAN: slab-use-after-free in __hlist_del include/linux/list.h:990 [inline]
BUG: KASAN: slab-use-after-free in hlist_del_rcu include/linux/rculist.h:516 [inline]
BUG: KASAN: slab-use-after-free in __xfrm_state_delete net/xfrm/xfrm_state.c
Write of size 8 at addr ffff8881198bcb70 by task kworker/u8:9/435
Workqueue: netns cleanup_net
Call Trace:
__hlist_del / hlist_del_rcu
__xfrm_state_delete
xfrm_state_delete
xfrm_state_flush
xfrm_state_fini
ops_exit_list
cleanup_net
The other observed signatures hit the same slab object from
__xfrm_state_lookup, xfrm_alloc_spi, __xfrm_state_insert and an OOB
write variant of __xfrm_state_delete, all on the byseq/byspi
hash chains.
__xfrm_state_delete() guards its byseq and byspi unhashes with
value-based predicates:
if (x->km.seq)
hlist_del_rcu(&x->byseq);
if (x->id.spi)
hlist_del_rcu(&x->byspi);
while everywhere else in the file (e.g. state_cache, state_cache_input)
the safer hlist_unhashed() check is used. xfrm_alloc_spi() sets
x->id.spi = newspi inside xfrm_state_lock and then immediately inserts
into byspi, but a path that observes x->id.spi != 0 outside of
xfrm_state_lock can still skip-or-hit the byspi unhash inconsistently
with whether x is actually on the list. The same holds for x->km.seq
versus byseq, and the bydst/bysrc unhashes have no predicate at all,
so a second __xfrm_state_delete() on the same object writes through
LIST_POISON pprev.
The defensive change here:
- Use hlist_del_init_rcu() instead of hlist_del_rcu() on bydst,
bysrc, byseq and byspi so a second deletion is a no-op rather
than a write through LIST_POISON pprev. The byseq/byspi nodes
are already initialised in xfrm_state_alloc().
- Test hlist_unhashed() rather than the value predicate for
byseq/byspi, so the unhash decision tracks list state rather than
mutable scalar fields.
Empirical verification: applied this patch on top of v6.12.47, rebuilt,
and re-ran the same syzkaller harness for 1h16m on a previously-crashy
configuration that produced ~100 hits each of slab-use-after-free
Read in xfrm_alloc_spi / Read in __xfrm_state_lookup / Write in
__xfrm_state_delete. After the patch, 7.1M execs across 32 VMs at
~1550 exec/sec produced zero xfrm_state UAF/OOB hits. /proc/slabinfo
confirms the xfrm_state slab is actively allocated and freed during
the run (~143 KiB resident), so the fuzzer is still exercising those
code paths -- they just no longer crash.
Reproduction:
- Linux 6.12.47 x86_64 + KASAN_GENERIC + KASAN_INLINE + KCOV
- syzkaller @ 746545b8b1e4c3a128db8652b340d3df90ce61db
- 32 QEMU/KVM VMs x 2 vCPU on AWS c5.metal bare metal
- 9 unique signatures collected in ~9h, all within xfrm_state
lifecycle
Fixes: fe9f1d8779 ("xfrm: add state hashtable keyed by seq")
Fixes: 7b4dc3600e ("[XFRM]: Do not add a state whose SPI is zero to the SPI hash.")
Reported-by: Michal Kosiorek <mkosiorek121@gmail.com>
Tested-by: Michal Kosiorek <mkosiorek121@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Michal Kosiorek <mkosiorek121@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Replace the open-coded manual cleanup in the error path of
xfrm_add_policy() with xfrm_policy_destroy(), which already
handles all the necessary cleanup internally. This is consistent
with how xfrm_policy_construct() handles its own error paths.
The walk.dead flag must be set before calling xfrm_policy_destroy()
as required by BUG_ON(!policy->walk.dead).
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The compat 64=>32 translation path handles XFRM_MSG_MAPPING, but
xfrm_msg_min[] does not provide the native payload size for this
message type.
Add the missing XFRM_MSG_MAPPING entry so compat translation can size
and translate mapping notifications correctly.
Fixes: 5461fc0c8d ("xfrm/compat: Add 64=>32-bit messages translator")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Ruijie Li <ruijieli51@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The SO_LINGER socket option has been supported for a while with MPTCP
sockets [1], but it didn't cause the equivalent of a TCP reset as
expected when enabled and its time was set to 0. This was causing some
behavioural differences with TCP where some connections were not
promptly stopped as expected.
To fix that, an extra condition is checked at close() time before
sending an MP_FASTCLOSE, the MPTCP equivalent of a TCP reset.
Note that backporting up to [1] will be difficult as more changes are
needed to be able to send MP_FASTCLOSE. It seems better to stop at [2],
which was supposed to already imitate TCP.
Validated with MPTCP packetdrill tests [3].
Fixes: 268b123874 ("mptcp: setsockopt: support SO_LINGER") [1]
Fixes: d21f834855 ("mptcp: use fastclose on more edge scenarios") [2]
Cc: stable@vger.kernel.org
Reported-by: Lance Tuller <lance@lance0.com>
Closes: https://github.com/lance0/xfr/pull/67
Link: https://github.com/multipath-tcp/packetdrill/pull/196 [3]
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260427-net-mptcp-misc-fixes-7-1-rc2-v1-3-7432b7f279fa@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both mptcp_setsockopt_sol_socket_tstamp() and
mptcp_setsockopt_sol_socket_timestamping() iterate over subflows,
acquire the subflow socket lock, but then erroneously pass the MPTCP
msk socket to sock_set_timestamp() / sock_set_timestamping() instead
of the subflow ssk. As a result, the timestamp flags are set on the
wrong socket and have no effect on the actual subflows.
Pass ssk instead of sk to both helpers.
Fixes: 9061f24bf8 ("mptcp: sockopt: propagate timestamp request to subflows")
Cc: stable@vger.kernel.org
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260427-net-mptcp-misc-fixes-7-1-rc2-v1-1-7432b7f279fa@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cake_dump_stats() runs without qdisc spinlock being held.
In this final patch, I add READ_ONCE()/WRITE_ONCE() annotations
for cparams.target and cparams.interval.
Fixes: 046f6fd5da ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: "Toke Høiland-Jørgensen" <toke@toke.dk>
Link: https://patch.msgid.link/20260427083606.459355-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cake_dump_stats() runs without qdisc spinlock being held.
In this fourth patch, I add READ_ONCE()/WRITE_ONCE() annotations
for the following fields:
- avg_peak_bandwidth
- buffer_limit
- buffer_max_used
- avg_netoff
- max_netlen
- max_adjlen
- min_netlen
- min_adjlen
- active_queues
- tin_rate_bps
- bytes
- tin_backlog
Other annotations are added in following patch, to ease code review.
Fixes: 046f6fd5da ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260427083606.459355-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cake_dump_stats() runs without qdisc spinlock being held.
In this third patch, I add READ_ONCE()/WRITE_ONCE() annotations
for the following fields:
- packets
- tin_dropped
- tin_ecn_mark
- ack_drops
- peak_delay
- avge_delay
- base_delay
Other annotations are added in following patches, to ease code review.
Fixes: 046f6fd5da ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: "Toke Høiland-Jørgensen" <toke@toke.dk>
Link: https://patch.msgid.link/20260427083606.459355-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cake_dump_stats() runs without qdisc spinlock being held.
In this second patch, I add READ_ONCE()/WRITE_ONCE() annotations
for the following fields:
- bulk_flow_count
- unresponsive_flow_count
- max_skblen
- flow_quantum
Other annotations are added in following patches, to ease code review.
Fixes: 046f6fd5da ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: "Toke Høiland-Jørgensen" <toke@toke.dk>
Link: https://patch.msgid.link/20260427083606.459355-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cake_dump_stats() runs without qdisc spinlock being held.
In this first patch, I add READ_ONCE()/WRITE_ONCE() annotations
for the following fields:
- way_hits
- way_misses
- way_collisions
- sparse_flow_count
- decaying_flow_count
Other annotations are added in following patches, to ease code review.
Fixes: 046f6fd5da ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: "Toke Høiland-Jørgensen" <toke@toke.dk>
Link: https://patch.msgid.link/20260427083606.459355-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After an association reaches ESTABLISHED, the peer’s init_tag is already
known from the handshake. Any subsequent INIT with the same init_tag is
not a valid restart, but a delayed or duplicate INIT.
Drop such INIT chunks in sctp_sf_do_unexpected_init() instead of
processing them as new association attempts.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://patch.msgid.link/5788c76c1ee122a3ed00189e88dcf9df1fba226c.1777214801.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
An INIT whose init_tag matches the peer's vtag does not provide new state
information. It indicates either:
- a stale INIT (after INIT-ACK has already been seen on the same side), or
- a retransmitted INIT (after INIT has already been recorded on the same
side).
In both cases, the INIT must not update ct->proto.sctp.init[] state, since
it does not advance the handshake tracking and may otherwise corrupt
INIT/INIT-ACK validation logic.
Allow INIT processing only when the conntrack entry is newly created
(SCTP_CONNTRACK_NONE), or when the init_tag differs from the stored peer
vtag.
Note it skips the check for the ct with old_state SCTP_CONNTRACK_NONE in
nf_conntrack_sctp_packet(), as it is just created in sctp_new() where it
set ct->proto.sctp.vtag[IP_CT_DIR_REPLY] = ih->init_tag.
Fixes: 9fb9cbb108 ("[NETFILTER]: Add nf_conntrack subsystem.")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/ee56c3e416452b2a40589a2a85245ac2ad5e9f4b.1777214801.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The dev-set and key-rotate netlink operations modify shared device
state (PSP version configuration and cryptographic key material,
respectively) but do not require CAP_NET_ADMIN. The only access
control is psp_dev_check_access() which merely verifies netns
membership.
Fixes: 00c94ca2b9 ("psp: base PSP device support")
Reviewed-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260427195856.401223-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
psp_assoc_device_get_locked() obtains a psp_dev reference via
psp_dev_get_for_sock() (which uses psp_dev_tryget() under RCU);
it then acquires psd->lock and drops the reference. Before
the lock is taken, psp_dev_unregister() can run to completion:
take psd->lock, clear out state, unlock, drop the registration
reference.
The expectation is that the lock prevents device unregistration,
but much like with netdevs special care has to be taken when
"upgrading" a reference to a locked device. Add the missing
check if device is still alive. psp_dev_is_registered() exists
already but had no callers, which makes me wonder if I either
forgot to add this or lost the check during refactoring...
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Fixes: 6b46ca260e ("net: psp: add socket security association code")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260427190606.366101-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=E/L6
-----END PGP SIGNATURE-----
Merge tag 'nf-26-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) IEEE1394 ARP payload contains no target hardware address in the
ARP packet. Apparently, arp_tables was never updated to deal with
IEEE1394 ARP properly. To deal with this, return no match in case
the target hardware address selector is used, either for inverse or
normal match. Moreover, arpt_mangle disallows mangling of the target
hardware and IP address because, it is not worth to adjust the
offset calculation to fix this, we suspect no users of arp_tables
for this family.
2) Use list_del_rcu() to delete device hooks in nf_tables, this hook
list is RCU protected, concurrent netlink dump readers can be
walking on this list, fix it by adding a helper function and use it
for consistency. From Florian Westphal.
3) Add list_splice_rcu(), this is useful for joining the local list of
new device hooks to the RCU protected hook list in chain and
flowtable. Reviewed by Paul E. McKenney.
4) Use list_splice_rcu() to publish the new device hooks in chain and
flowtable to fix concurrent netlink dump traversal.
5) Add a new hook transaction object to track device hook deletions.
The current approach moves device hooks to be deleted around during
the preparation phase, this breaks concurrent RCU reader via netlink
dump. This new hook transaction is combined with NFT_HOOK_REMOVE
flag to annotate hooks for removal in the preparation phase.
6) xt_policy inbound policy check in strict mode can lead to
out-of-bound access of the secpath array due to incorrect.
The iteration over the secpath needs to be reversed in the inbound
to check for the human readable policy, expecting inner in first
position and outer in second position, the secpath from inbound
actually stores outer in first position then in second position.
From Jiexun Wang.
7) Fix possible zero shift in nft_bitwise triggering UBSAN splat,
reject zero shift from control plane, from Kai Ma.
8) Replace simple_strtoul() in the conntrack SIP helper since it relies
on nul-terminated strings. From Florian Westphal.
* tag 'nf-26-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_conntrack_sip: don't use simple_strtoul
netfilter: reject zero shift in nft_bitwise
netfilter: xt_policy: fix strict mode inbound policy matching
netfilter: nf_tables: add hook transactions for device deletions
netfilter: nf_tables: join hook list via splice_list_rcu() in commit phase
rculist: add list_splice_rcu() for private lists
netfilter: nf_tables: use list_del_rcu for netlink hooks
netfilter: arp_tables: fix IEEE1394 ARP payload parsing
====================
Link: https://patch.msgid.link/20260428095840.51961-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, mctp_i2c_get_tx_flow_state() is called before the packet length
sanity check. This function marks a new flow as active in the MCTP core.
If the sanity check fails, mctp_i2c_xmit() returns early without calling
mctp_i2c_lock_nest(). This results in a mismatched locking state: the
flow is active, but the I2C bus lock was never acquired for it.
When the flow is later released, mctp_i2c_release_flow() will see the
active state and queue an unlock marker. The TX thread will then
decrement midev->i2c_lock_count from 0, causing it to underflow to -1.
This underflow permanently breaks the driver's locking logic, allowing
future transmissions to occur without holding the I2C bus lock, leading
to bus collisions and potential hardware hangs.
Move the mctp_i2c_get_tx_flow_state() call to after the length sanity
check to ensure we only transition the flow state if we are actually
going to proceed with the transmission and locking.
Fixes: f5b8abf9fc ("mctp i2c: MCTP I2C binding driver")
Signed-off-by: William A. Kennington III <william@wkennington.com>
Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20260423074741.201460-1-william@wkennington.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
seg6_input_core() and rpl_input() call ip6_route_input() which sets a
NOREF dst on the skb, then pass it to dst_cache_set_ip6() invoking
dst_hold() unconditionally.
On PREEMPT_RT, ksoftirqd is preemptible and a higher-priority task can
release the underlying pcpu_rt between the lookup and the caching
through a concurrent FIB lookup on a shared nexthop.
Simplified race sequence:
ksoftirqd/X higher-prio task (same CPU X)
----------- --------------------------------
seg6_input_core(,skb)/rpl_input(skb)
dst_cache_get()
-> miss
ip6_route_input(skb)
-> ip6_pol_route(,skb,flags)
[RT6_LOOKUP_F_DST_NOREF in flags]
-> FIB lookup resolves fib6_nh
[nhid=N route]
-> rt6_make_pcpu_route()
[creates pcpu_rt, refcount=1]
pcpu_rt->sernum = fib6_sernum
[fib6_sernum=W]
-> cmpxchg(fib6_nh.rt6i_pcpu,
NULL, pcpu_rt)
[slot was empty, store succeeds]
-> skb_dst_set_noref(skb, dst)
[dst is pcpu_rt, refcount still 1]
rt_genid_bump_ipv6()
-> bumps fib6_sernum
[fib6_sernum from W to Z]
ip6_route_output()
-> ip6_pol_route()
-> FIB lookup resolves fib6_nh
[nhid=N]
-> rt6_get_pcpu_route()
pcpu_rt->sernum != fib6_sernum
[W <> Z, stale]
-> prev = xchg(rt6i_pcpu, NULL)
-> dst_release(prev)
[prev is pcpu_rt,
refcount 1->0, dead]
dst = skb_dst(skb)
[dst is the dead pcpu_rt]
dst_cache_set_ip6(dst)
-> dst_hold() on dead dst
-> WARN / use-after-free
For the race to occur, ksoftirqd must be preemptible (PREEMPT_RT without
PREEMPT_RT_NEEDS_BH_LOCK) and a concurrent task must be able to release
the pcpu_rt. Shared nexthop objects provide such a path, as two routes
pointing to the same nhid share the same fib6_nh and its rt6i_pcpu
entry.
Fix seg6_input_core() and rpl_input() by calling skb_dst_force() after
ip6_route_input() to force the NOREF dst into a refcounted one before
caching.
The output path is not affected as ip6_route_output() already returns a
refcounted dst.
Fixes: af4a2209b1 ("ipv6: sr: use dst_cache in seg6_input")
Fixes: a7a29f9c36 ("net: ipv6: add rpl sr tunnel")
Cc: stable@vger.kernel.org
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Justin Iurman <justin.iurman@gmail.com>
Link: https://patch.msgid.link/20260421094735.20997-1-andrea.mayer@uniroma2.it
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jouni reported that certain sequences of tests caused some
WDS tests to fail after applying the upcoming hwsim changes
for NAN. I bisected that down to converting hwsim to TXQs,
and after a long debug session found that the 4-addr NDP was
getting dropped, because it goes out via a (management) TXQ
and is a data frame.
It's unclear to me now why this only happens in some test
sequences (e.g. "sigma_dut_sae_h2e_ap_loop ap_wds_sta" and
"sigma_dut_eap_ttls_all_akm_suites ap_wds_sta_open"), maybe
that affects timing and the frame is otherwise delayed in
some way.
Correct the check to only drop frames that actually carry
data, not NDPs.
Reported-by: Jouni Malinen <j@w1.fi>
Link: https://patch.msgid.link/20260417141601.851ddf4adb59.I3d668c0e1bdca9cd98f2fc46f84a066e68cc7a62@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Prefer 'kstrtobool_from_user()' over an ad-hoc quirks in
'aql_enable_write()' and 'force_tx_status_write()' callbacks.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20260417105556.2886928-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Per Wi-Fi Aware v4.0 section 7.1.2, NAN Data interfaces shall only
use CCMP-128 or GCMP-256 for frame protection. Enforce this in
cfg80211_validate_key_settings() by passing the wdev down to it.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415183550.14a422ac52fd.I486ae7188bc60e44503ecccc99af6ae3a31d16b8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When a (link) station connected to an AP interface is not
capable of EHT, it's possible that the AP interface is in
160 MHz but the HE channel is narrower, e.g. when EHT has
puncturing. In this case, the code doesn't correctly set
the STAs bandwidth, the station might be capable of using
160 MHz, but it can't use EHT 160 MHz with puncturing, so
it must be set to narrower.
Track the AP's 'he_and_lower_bw' bandwidth, use that when
calculating the maximum bandwidth to transmit to/from any
station not capable of EHT, and update all stations and
the chanctx min_def when it changes.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.d41efd67876c.I29ef615e6ab049a56c20f3226b5e953859f890b0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The per-STA bandwidth handling is completely confusing, given
the function names etc.
Move everything to sta_info.c and rename the functions to
accurately reflect what they return:
- ieee80211_sta_bw_capability()
- ieee80211_sta_current_bw() can return the appropriate
bandwidth in the desired direction (a new enum)
At any given time, the bandwidth with which we expect to receive
frames from a station may differ from the bandwidth with which
we may transmit frames to the station; this will happen either
during RX OMI negotiation, or for a long time if the station
used an HT Notify Channel Width frame. We also implement the
(VHT) Operating Mode Notification as an asymmetric setting, even
if the spec would seem to imply it could be symmetric.
Also rename the 'cur_max_bandwidth' value to 'op_mode_bw' which
matches the 'op_mode_nss', indicating more clearly what it _is_
rather than how it's _used_. It's not quite precise (NSS is)
since it's also HT chanwidth notification, but that seems OK.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.09ae71b74d5c.Ib59c2ac82e030559d1f7d462f06ba3488a090946@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Instead of validating the AP operation elements and PHY regulatory
individually in each caller, which missed CSA and color change,
pass the channel to the beacon parsing function and validate the
parameters there. This adds it to the missing places.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.2a334f0bc247.I2e0b12ce5eddd422a553d10ba2ed7dcd0fbb1871@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In addition to providing HE/EHT/UHR operation, also check
and provide HT/VHT operation, so that drivers have it and
can use it, e.g. to correctly calculate station bandwidth.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.32ad98454543.Ia9692671b699164edcc0bdaf4fdbdbefc50b18f8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If any of these are present, the code only assigns pointers when
they're also long enough. Instead of ignoring them in that case,
reject the configuration instead.
Also add error messages to existing error paths.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.40c24d7ee2df.Ib1368e4d8e33a396f332a38a6ba6708fd188f143@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The HT/VHT/HE/EHT/UHR operation can change, and might thus be
updated on each beacon update. Move them to the beacon struct
and parse them out of the beacon also on updates, not just on
starting the AP.
This also fixes checks in two ways:
- Regulatory checks in nl80211_validate_ap_phy_operation() are
now done also on updates, disallowing enabling HE/EHT/UHR on
channels that don't allow that after start. This checks only
operation now, but clients can't use it without operation.
- NL80211_ATTR_UHR_OPERATION is now required whenever UHR is
present in the beacon, and rejected otherwise.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.f70758a46904.I0d21120b41eed661eefc61d5417dadaae7145845@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are three versions of this function, but now there's
no caller to ieee80211_sta_cap_rx_bw() and the chandef is
always given. Rename the functions to have one underscore
less and rely on the chandef being passed.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.62f48003f11c.Ib84ab7aeab8b278ab46d85b142a66bf330909eb6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, the initial STA bandwidth is set during each
parsing of HT/VHT/... elements to the station capabilities,
multiple times, in a confusing way that's not very good in
the case of NAN stations either.
For now, keep the NULL chandef pointer and all that, but
clean up the initial handling of NSS/BW capabilities and
then apply the VHT operation mode on top of that. This
clarifies the code and the client code now also handles
the bandwidth change from Operating Mode Notification in
association response.
The HT code is completely unnecessary now, since the VHT
(soon to be renamed) function will be called and handles
HT as well.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.a4d88eb27a8d.Id7a316e75e7e3dce2023d987e6939060f5286378@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move ieee80211_sta_init_nss() from VHT code to station code,
and disentangle it from rate control. This way, it becomes
clearer when 'rx_nss' is set up.
While doing this, fix the client side code to set up
link_sta->op_mode_nss instead of link_sta->pub->rx_nss for
the opmode element in association response, and remove the
(now wrong) comment about handling that in the function.
type=cleanup
ticket=none
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-on: https://gerritwcs.ir.intel.com/c/iwlwifi-stack-dev/+/273695
Tested-by: iil_jenkins iil_jenkins <EC.GER.UNIX.IIL.JENKINS@INTEL.COM>
tested: iil_jenkins iil_jenkins <EC.GER.UNIX.IIL.JENKINS@INTEL.COM>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.bef3d07beeb6.I97fb93ccc1b366110ab23de58fcd73676cdd85d6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This function is only called for at least HT capable stations,
so doesn't need to differentiate 20/20_NOHT. Also, the check
for VHT 160 MHz support is wrong, since a station could have
support for both and the AP is using 80+80, but nothing cares
anyway, so we don't need that.
Simplify the function and move it to util.c since it now no
longer is related to VHT, and also doesn't need a station.
Also use the new function in ieee80211_get_sta_bw() for the
chandef calculations, it just needs to handle the 20/20-noht
separately; while at it fix that to handle HE stations.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.7b0be1059436.I573add4e3ed68b15f8b45122d053ac523afe4025@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This function is only used by TDLS, but is more or less equivalent
to ieee80211_sta_cap_rx_bw() (which takes OMI into account, but that
won't be used in TDLS), except it tries to differentiate 80+80 and
160, but then caller doesn't care about that. Remove the function.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.138728393e2b.I4ea9221cafcfd034dda430e76de82eec59ab1e71@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When getting the station's bandwidth for TDLS chanctx
updates, pass the chandef so that the band can be used
in _ieee80211_sta_cap_rx_bw(), instead of this using
ieee80211_sta_cap_rx_bw() which looks it up from the
link.
This removes the last user of ieee80211_sta_cap_rx_bw().
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.cc7c1590e953.Id2381d2b5a9d1ded170501976240d4fca23ee35c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When getting the bandwidth the station uses in order to
calculate the channel context's min_def, pass the channel
for the link to _ieee80211_sta_cap_rx_bw() instead of using
ieee80211_sta_cap_rx_bw(), which looks it up.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.d2bdf106a39f.I6ae07289a272dd9e27118f9fa324a4865f994003@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When an HT channel width update comes in, don't use the
capability of the station, but rather set it to max as
the capability will be taken into account anyway when
using the value.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.bab6e4195d78.I9683605229ed1b75ff5a9c14e967762e88b3fc36@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Instead of calculating the individual maximum for each
station from its capabilities, just unconditionally set
cur_max_bandwidth to IEEE80211_STA_RX_BW_MAX. This still
works because cur_max_bandwidth is only used together
with the capabilities of the station anyway, and then
adjusted by HT channel width notification or VHT opmode
notification action frames.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.43cdb11b5c7e.I99a7ea2ab10b6fffb68a401a26b98d546e428c11@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The NAN guards here make little sense, just don't WARN inside
the function (and return maximum instead of minimum). Otherwise
we need to guard more calls, such as in EHT in the future.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.be6bc3fd5fdf.I38ce6c763c361a3ce50618e820a0818eb18e49dd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The error message emitted by nl80211_validate_key_link_id() when a group
key install on an MLO wdev is missing the link ID reads "link ID must
for MLO group key", which is missing the words "be set". This makes the
error harder to grep and parse in userspace logs, and is reported
verbatim by wpa_supplicant via its nl80211 extack relay, e.g.:
wpa_supplicant: nl80211: kernel reports: link ID must for MLO group key
The sibling error strings in the same helper already use grammatical
phrasing ("link ID not allowed for pairwise key", "invalid link ID for
MLO group key", "link ID not allowed for non-MLO group key"). Fix this
one to match.
No functional change.
Fixes: e7a7b84e33 ("wifi: cfg80211: Add link_id parameter to various key operations for MLO")
Signed-off-by: Louis Kotze <loukot@gmail.com>
Link: https://patch.msgid.link/20260414122728.92234-1-loukot@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Duplicate entries in wiphy->cipher_suites do not describe any
additional capability, but cfg80211 currently accepts them and leaves
individual consumers to deal with them.
One such consumer is the WEXT compatibility code, which appends a WEP
key length for each WEP cipher entry it sees. Repeated WEP entries can
therefore overflow the fixed iw_range::encoding_size array returned by
SIOCGIWRANGE.
Reject duplicate cipher suite entries in wiphy_register() instead.
This keeps the cipher suite invariant in one place and makes malformed
wiphy descriptions fail early with -EINVAL, rather than relying on a
single cfg80211 user to handle duplicates correctly.
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Yuqi Xu <xuyuqiabc@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Link: https://patch.msgid.link/20260413123000.1480661-1-n05ec@lzu.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the final version of 802.11be-2024, Transition Delay and Padding
Delay subfield are for both EMLSR and EMLMR. Depending if the mode is
EMLSR or EMLMR, the interpretation of the encoded value might change.
Define all the constants and helpers to interpret delay subfields both
in EMLSR and EMLMR mode.
Signed-off-by: Pablo Martin-Gomez <pmartin-gomez@freebox.fr>
Link: https://patch.msgid.link/20260410170429.343617-4-pmartin-gomez@freebox.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
On VXLAN over IPsec egress, xfrm{4,6}_transport_output() blindly
overwrite inner_transport_header (== the inner TCP header saved in VXLAN
iptunnel_handle_offloads() -> skb_reset_inner_headers()) with the
current transport_header (== the VXLAN outer UDP header set by
udp_tunnel_xmit_skb()).
This was a latent bug, harmless until commit [1] added a doff validation
check in qdisc_pkt_len_segs_init() for encapsulated GSO packets. With
the wrong inner_transport_header set by xfrm, qdisc_pkt_len_segs_init()
interprets inner_transport_header as a TCP header, reads doff=0 from the
upper byte of the VNI and drops the packet with DROP_REASON_SKB_BAD_GSO.
Besides the use in GSO to determine the header size of segmented
packets, inner_transport_header might be used by drivers to set up
inner checksum offloading by pointing the HW to the inner transport
header. A quick browse through available drivers shows that mlx5 uses
skb->csum_start specifically for this scenario, while others either
don't support VXLAN over IPsec crypto offload (ixgbe) or the HW is
capable of parsing the packets itself (nfp, Chelsio).
But in all cases, it is more correct to let the inner_transport_header
point to the innermost header instead of overwriting it in xfrm.
So fix this by guarding all four inner header save sites in
xfrm_output.c (xfrm{4,6}_transport_output, xfrm{4,6}_tunnel_encap_add)
with a check for skb->inner_protocol. When inner_protocol is set, a
tunnel layer (VXLAN, Geneve, GRE, etc.) has already saved the correct
inner header offsets and they must not be overwritten. When
inner_protocol is zero, no prior tunnel encapsulation exists and xfrm
must save the inner headers itself. The tunnel mode checks are only
added for completion, since they aren't strictly required, as
xfrm_output() forces software GSO in tunnel mode before encap.
This makes the previously added test pass:
# ./tools/testing/selftests/drivers/net/hw/ipsec_vxlan.py
TAP version 13
1..4
ok 1 ipsec_vxlan.test_vxlan_ipsec_crypto_offload.outer_v4_inner_v4
ok 2 ipsec_vxlan.test_vxlan_ipsec_crypto_offload.outer_v4_inner_v6
ok 3 ipsec_vxlan.test_vxlan_ipsec_crypto_offload.outer_v6_inner_v4
ok 4 ipsec_vxlan.test_vxlan_ipsec_crypto_offload.outer_v6_inner_v6
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
[1] commit 7fb4c19670 ("net: pull headers in qdisc_pkt_len_segs_init()")
Fixes: f1bd7d659e ("xfrm: Add encapsulation header offsets while SKB is not encrypted")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
netpoll_setup() decides whether to auto-populate the local source
address by testing np->local_ip.ip, which only inspects the first 4
bytes of the union inet_addr storage.
For an IPv6 netpoll whose caller-supplied local address has a zero
high-32 bits (::1, ::<suffix>, IPv4-mapped ::ffff:a.b.c.d, etc.), this
misdetects the address as unset (which they are not, but the first
4 bytes are empty), calls netpoll_take_ipv6() and overwrites it with
whatever matching link-local/global address the device happens to expose
first.
Introduce a helper netpoll_local_ip_unset() that picks the correct
family-aware test (ipv6_addr_any() for IPv6, !.ip for IPv4) and use it
from netpoll_setup().
Reproducer is something like:
echo "::2" > local_ip
echo 1 > enabled
cat local_ip
# before this fix: 2001:db8::1 (caller-supplied ::2 was clobbered)
# after this fix: ::2
Fixes: b7394d2429 ("netpoll: prepare for ipv6")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260424-netpoll_fix-v1-1-3a55348c625f@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_clamp_probe0_to_user_timeout() computes remaining time in jiffies
using subtraction with an unsigned lvalue. If elapsed probing time
exceeds the configured TCP_USER_TIMEOUT, the underflow yields a large
value.
This ends up re-arming the probe timer for a full backoff interval
instead of expiring immediately, delaying connection teardown beyond
the configured timeout.
Fix this by preventing underflow so user-set timeout expiration is
handled correctly without extending the probe timer.
Fixes: 344db93ae3 ("tcp: make TCP_USER_TIMEOUT accurate for zero window probes")
Link: https://lore.kernel.org/r/20260414013634.43997-1-ahacigu.linux@gmail.com
Signed-off-by: Altan Hacigumus <ahacigu.linux@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260424014639.54110-1-ahacigu.linux@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
neigh_xmit always releases the skb, except when no neighbour table is
found. But even the first added user of neigh_xmit (mpls) relied on
neigh_xmit to release the skb (or queue it for tx).
sashiko reported:
If neigh_xmit() is called with an uninitialized neighbor table (for
example, NEIGH_ND_TABLE when IPv6 is disabled), it returns -EAFNOSUPPORT
and bypasses its internal out_kfree_skb error path. Because the return
value of neigh_xmit() is ignored here, does this leak the SKB?
Assume full ownership and remove the last code path that doesn't
xmit or free skb.
Fixes: 4fd3d7d9e8 ("neigh: Add helper function neigh_xmit")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260424145843.74055-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With CONFIG_IP_MROUTE_MULTIPLE_TABLES=n, ipmr_fib_lookup()
does not check if net->ipv4.mrt is NULL.
Since default_device_exit_batch() is called after ->exit_rtnl(),
a device could receive IGMP packets and access net->ipv4.mrt
during/after ipmr_rules_exit_rtnl().
If ipmr_rules_exit_rtnl() had already cleared it and freed the
memory, the access would trigger null-ptr-deref or use-after-free.
Let's fix it by using RCU helper and free mrt after RCU grace
period.
In addition, check_net(net) is added to mroute_clean_tables()
and ipmr_cache_unresolved() to synchronise via mfc_unres_lock.
This prevents ipmr_cache_unresolved() from putting skb into
c->_c.mfc_un.unres.unresolved after mroute_clean_tables()
purges it.
For the same reason, timer_shutdown_sync() is moved after
mroute_clean_tables().
Since rhltable_destroy() holds mutex internally, rcu_work is
used, and it is placed as the first member because rcu_head
must be placed within <4K offset. mr_table is alraedy 3864
bytes without rcu_work.
Note that IP6MR is not yet converted to ->exit_rtnl(), so this
change is not needed for now but will be.
Fixes: b22b018674 ("ipmr: Convert ipmr_net_exit_batch() to ->exit_rtnl().")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260423053456.4097409-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported a kernel BUG triggered from pn_socket_sendmsg() via
pn_socket_autobind():
kernel BUG at net/phonet/socket.c:213!
RIP: 0010:pn_socket_autobind net/phonet/socket.c:213 [inline]
RIP: 0010:pn_socket_sendmsg+0x240/0x250 net/phonet/socket.c:421
Call Trace:
sock_sendmsg_nosec+0x112/0x150 net/socket.c:797
__sock_sendmsg net/socket.c:812 [inline]
__sys_sendto+0x402/0x590 net/socket.c:2280
...
pn_socket_autobind() calls pn_socket_bind() with port 0 and, on
-EINVAL, assumes the socket was already bound and asserts that the
port is non-zero:
err = pn_socket_bind(sock, ..., sizeof(struct sockaddr_pn));
if (err != -EINVAL)
return err;
BUG_ON(!pn_port(pn_sk(sock->sk)->sobject));
return 0; /* socket was already bound */
However pn_socket_bind() also returns -EINVAL when sk->sk_state is not
TCP_CLOSE, even when the socket has never been bound and pn_port() is
still 0. In that case the BUG_ON() fires and panics the kernel from a
user-triggerable path.
Treat the "bind returned -EINVAL but pn_port() is still 0" case as a
regular error and propagate -EINVAL to the caller instead of crashing.
Existing callers already translate a non-zero return from
pn_socket_autobind() into -ENOBUFS/-EAGAIN, so returning -EINVAL here
only changes behaviour from panic to a normal errno.
Fixes: ba113a94b7 ("Phonet: common socket glue")
Reported-by: syzbot+706f5eb79044e686c794@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=706f5eb79044e686c794
Suggested-by: Remi Denis-Courmont <courmisch@gmail.com>
Signed-off-by: Morduan Zang <zhangdandan@uniontech.com>
Signed-off-by: zhanjun <zhanjun@uniontech.com>
Acked-by: Rémi Denis-Courmont <remi@remlab.net>
Link: https://patch.msgid.link/87A8960A2045AF3C+20260423010557.138124-1-zhangdandan@uniontech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a TAPRIO child qdisc is deleted via RTM_DELQDISC, taprio_graft()
is called with new == NULL and stores NULL into q->qdiscs[cl - 1].
Subsequent RTM_GETTCLASS dump operations walk all classes via
taprio_walk() and call taprio_dump_class(), which calls taprio_leaf()
returning the NULL pointer, then dereferences it to read child->handle,
causing a kernel NULL pointer dereference.
The bug is reachable with namespace-scoped CAP_NET_ADMIN on any kernel
with CONFIG_NET_SCH_TAPRIO enabled. On systems with unprivileged user
namespaces enabled, an unprivileged local user can trigger a kernel
panic by creating a taprio qdisc inside a new network namespace,
grafting an explicit child qdisc, deleting it, and requesting a class
dump. The RTM_GETTCLASS dump itself requires no capability.
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000007: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f]
RIP: 0010:taprio_dump_class (net/sched/sch_taprio.c:2478)
Call Trace:
<TASK>
tc_fill_tclass (net/sched/sch_api.c:1966)
qdisc_class_dump (net/sched/sch_api.c:2326)
taprio_walk (net/sched/sch_taprio.c:2514)
tc_dump_tclass_qdisc (net/sched/sch_api.c:2352)
tc_dump_tclass_root (net/sched/sch_api.c:2370)
tc_dump_tclass (net/sched/sch_api.c:2431)
rtnl_dumpit (net/core/rtnetlink.c:6864)
netlink_dump (net/netlink/af_netlink.c:2325)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6959)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
</TASK>
Fix this by substituting &noop_qdisc when new is NULL in
taprio_graft(), a common pattern used by other qdiscs (e.g.,
multiq_graft()) to ensure the q->qdiscs[] slots are never NULL.
This makes control-plane dump paths safe without requiring individual
NULL checks.
Since the data-plane paths (taprio_enqueue and taprio_dequeue_from_txq)
previously had explicit NULL guards that would drop/skip the packet
cleanly, update those checks to test for &noop_qdisc instead. Without
this, packets would reach taprio_enqueue_one() which increments the root
qdisc's qlen and backlog before calling the child's enqueue; noop_qdisc
drops the packet but those counters are never rolled back, permanently
inflating the root qdisc's statistics.
After this change *old can be a valid qdisc, NULL, or &noop_qdisc.
Only call qdisc_put(*old) in the first case to avoid decreasing
noop_qdisc's refcount, which was never increased.
Fixes: 665338b2a7 ("net/sched: taprio: dump class stats for the actual q->qdiscs[]")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Tested-by: Weiming Shi <bestswngs@gmail.com>
Link: https://patch.msgid.link/20260422161958.2517539-3-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipv6_rpl_srh_rcv() decompresses an RFC 6554 Source Routing Header, swaps
the next segment into ipv6_hdr->daddr, recompresses, then pulls the old
header and pushes the new one plus the IPv6 header back. The
recompressed header can be larger than the received one when the swap
reduces the common-prefix length the segments share with daddr (CmprI=0,
CmprE>0, seg[0][0] != daddr[0] gives the maximum +8 bytes).
pskb_expand_head() was gated on segments_left == 0, so on earlier
segments the push consumed unchecked headroom. Once skb_push() leaves
fewer than skb->mac_len bytes in front of data,
skb_mac_header_rebuild()'s call to:
skb_set_mac_header(skb, -skb->mac_len);
will store (data - head) - mac_len into the u16 mac_header field, which
wraps to ~65530, and the following memmove() writes mac_len bytes ~64KiB
past skb->head.
A single AF_INET6/SOCK_RAW/IPV6_HDRINCL packet over lo with a two
segment type-3 SRH (CmprI=0, CmprE=15) reaches headroom 8 after one
pass; KASAN reports a 14-byte OOB write in ipv6_rthdr_rcv.
Fix this by expanding the head whenever the remaining room is less than
the push size plus mac_len, and request that much extra so the rebuilt
MAC header fits afterwards.
Fixes: 8610c7c6e3 ("net: ipv6: add support for rpl sr exthdr")
Cc: stable <stable@kernel.org>
Reported-by: Anthropic
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026042133-gout-unvented-1bd9@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fq_codel_dump_stats() acquires the qdisc spinlock a bit too late.
Move this acquisition before we fill tc_fq_pie_xstats with live data.
Alternative would be to add READ_ONCE() and WRITE_ONCE() annotations,
but the spinlock is needed anyway to scan q->new_flows and q->old_flows.
Fixes: ec97ecf1eb ("net: sched: add Flow Queue PIE packet scheduler")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260423063527.2568262-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
choke_dump_stats() only runs with RTNL held.
It reads fields that can be changed in qdisc fast path.
Add READ_ONCE()/WRITE_ONCE() annotations.
Fixes: edb09eb17e ("net: sched: do not acquire qdisc spinlock in qdisc/class stats dump")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260423062839.2524324-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reject requests with negative latency or jitter.
A negative value added to current timestamp (u64) wraps
to an enormous time_to_send, disabling dequeue.
The original UAPI used u32 for these values; the conversion to 64-bit
time values via TCA_NETEM_LATENCY64 and TCA_NETEM_JITTER64
allowed signed values to reach the kernel without validation.
Jitter is already silently clamped by an abs() in netem_change();
that abs() can be removed in a follow-up once this rejection is in
place.
Fixes: 99803171ef ("netem: add uapi to express delay and jitter in nanoseconds")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260418032027.900913-7-stephen@networkplumber.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
get_slot_next() computes a random delay between min_delay and
max_delay using:
get_random_u32() * (max_delay - min_delay) >> 32
This overflows signed 64-bit arithmetic when the delay range exceeds
approximately 2.1 seconds (2^31 nanoseconds), producing a negative
result that effectively disables slot-based pacing. This is a
realistic configuration for WAN emulation (e.g., slot 1s 5s).
Use mul_u64_u32_shr() which handles the widening multiply without
overflow.
Fixes: 0a9fe5c375 ("netem: slotting with non-uniform distribution")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260418032027.900913-6-stephen@networkplumber.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reject slot configurations that have no defensible meaning:
- negative min_delay or max_delay
- min_delay greater than max_delay
- negative dist_delay or dist_jitter
- negative max_packets or max_bytes
Negative or out-of-order delays underflow in get_slot_next(),
producing garbage intervals. Negative limits trip the per-slot
accounting (packets_left/bytes_left <= 0) on the first packet of
every slot, defeating the rate-limiting half of the slot feature.
Note that dist_jitter has been silently coerced to its absolute
value by get_slot() since the feature was introduced; rejecting
negatives here converts that silent coercion into -EINVAL. The
abs() can be removed in a follow-up.
Fixes: 836af83b54 ("netem: support delivering packets in delayed time slots")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260418032027.900913-5-stephen@networkplumber.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netem_change() unconditionally reseeds the PRNG on every tc change
command. If TCA_NETEM_PRNG_SEED is not specified, a new random seed
is generated, destroying reproducibility for users who set a
deterministic seed on a previous change.
Move the initial random seed generation to netem_init() and only
reseed in netem_change() when TCA_NETEM_PRNG_SEED is explicitly
provided by the user.
Fixes: 4072d97ddc ("netem: add prng attribute to netem_sched_data")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260418032027.900913-4-stephen@networkplumber.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The queue limit check in netem_enqueue() uses q->t_len which only
counts packets in the internal tfifo. Packets placed in sch->q by
the reorder path (__qdisc_enqueue_head) are not counted, allowing
the total queue occupancy to exceed sch->limit under reordering.
Include sch->q.qlen in the limit check.
Fixes: f8d4bc4550 ("net/sched: netem: account for backlog updates from child qdisc")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260418032027.900913-3-stephen@networkplumber.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 4-state Markov chain in loss_4state() has gaps at the boundaries
between transition probability ranges. The comparisons use:
if (rnd < a4)
else if (a4 < rnd && rnd < a1 + a4)
When rnd equals a boundary value exactly, neither branch matches and
no state transition occurs. The redundant lower-bound check (a4 < rnd)
is already implied by being in the else branch.
Remove the unnecessary lower-bound comparisons so the ranges are
contiguous and every random value produces a transition, matching
the GI (General and Intuitive) loss model specification.
This bug goes back to original implementation of this model.
Fixes: 661b79725f ("netem: revised correlated loss generator")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260418032027.900913-2-stephen@networkplumber.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ieee80211_invoke_fast_rx() is documented as safe for parallel RX, but
its per-invocation rx_result is declared static. Concurrent callers then
share one instance and can overwrite each other's result between
ieee80211_rx_mesh_data() and the switch on res.
That can make a packet that was queued or consumed by
ieee80211_rx_mesh_data() fall through into ieee80211_rx_8023(), or make
a packet that should continue return as queued.
Make res an automatic variable so each invocation keeps its own result.
Fixes: 3468e1e0c6 ("wifi: mac80211: add mesh fast-rx support")
Cc: stable@vger.kernel.org
Signed-off-by: Catherine <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260424131435.83212-2-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
__ieee80211_rx_handle_packet() resolves the link via
ieee80211_rx_data_set_link() on the pubsta->mlo path but ignores the
helper's return value. Inside the helper,
rx->link = rcu_dereference(rx->sdata->link[link_id]);
can leave rx->link NULL if link_id references a slot already cleared
by ieee80211_vif_set_links() during station-initiated ML
reconfiguration (see mlme.c's ieee80211_ml_reconfiguration(), which
invalidates sdata->link[] before the matching
ieee80211_sta_remove_link() loop walks the link-sta hash). RX dispatch
still resolves a link_sta from the hash and then drops into
ieee80211_prepare_and_rx_handle(), which dereferences link->conf->addr.
Every other user site of ieee80211_rx_data_set_link() checks the return
and bails on failure; only this branch did not. Mirror the safe
pattern.
Fixes: e66b7920aa ("wifi: mac80211: fix initialization of rx->link and rx->link_sta")
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260422000651.4184602-1-michael.bommarito@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
NL80211_CMD_SET_PMK and NL80211_CMD_DEL_PMK manage the offloaded
4-way-handshake PMK state used by drivers advertising
NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X. The only in-tree
driver that wires up both ->set_pmk / ->del_pmk and advertises
the feature today is brcmfmac, so the practical reach of this
patch is narrow.
Both ops were introduced without a .flags gate, so the generic
netlink layer dispatches them to an unprivileged caller instead
of rejecting with -EPERM at the permission check. Every other
connection-state op in the adjacent block (CONNECT, ASSOCIATE,
AUTHENTICATE, SET_KEY, ...) carries GENL_UNS_ADMIN_PERM; SET_PMK
/ DEL_PMK were introduced without the flag in 2017 and left
unchanged by later refactors. Johannes checked the original
Intel submission history and confirmed there is no admin check
in any prior revision either, so this seems likely to be a
simple oversight rather than an intentional carve-out.
Require GENL_UNS_ADMIN_PERM so the genl layer performs the same
capable(CAP_NET_ADMIN) check as its siblings. wpa_supplicant
already needs CAP_NET_ADMIN for every other nl80211 op it issues,
so supplicant operation is unaffected. The worst case the missing
gate enables today is an unprivileged local process on a
multi-user system invalidating the offloaded PMK state of another
user's 4-way-handshake session, forcing a full EAP re-auth on the
next reconnect.
Verified in UML: an unprivileged probe (uid=1000) sees
SET_MULTICAST_TO_UNICAST (sibling op with GENL_UNS_ADMIN_PERM)
return -EPERM on both pre- and post-fix kernels, while SET_PMK /
DEL_PMK return -ENODEV from nl80211_pre_doit()'s wdev lookup pre-
fix (proving dispatch crossed the genl permission check) and
-EPERM post-fix (rejected at the genl layer as intended).
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Fixes: 3a00df5707 ("cfg80211: support 4-way handshake offloading for 802.1X")
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom>
Link: https://patch.msgid.link/20260421224552.4044147-1-michael.bommarito@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some Xfinity XB8 firmware advertises >1 spatial stream MCS indexes in
their basic HT-MCS set. On cards with lower spatial streams, the check
would fail, and we'd be stuck with no HT when in fact work fine with its
own supported rate. This change makes it so the check is only performed
in strict mode.
Fixes: 574faa0e93 ("wifi: mac80211: add HT and VHT basic set verification")
Signed-off-by: Rio Liu <rio@r26.me>
Link: https://patch.msgid.link/99Mv9QEceyPrQhSP52MtAVmz0_kWJmzqotJjD9YW6LGLqk-AZloAueUyHCURilFkuqOh6Ecv8i2KKdSE1ujP3AnbU5QEouVisT1w_V3xdfc=@r26.me
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Highlights include:
Bugfixes:
- NFS: Fix handling of ENOSPC so that if we have to resend writes, they
are written synchronously.
- SUNRPC: RDMA transport fixes from Chuck
- NFSv4.2: Several fixes for delegated timestamps
- NFSv4: Failure to obtain a directory delegation should not cause
stat() to fail.
- NFSv4: Rename was failing to update timestamps when a directory
delegation is held.
- NFSv4: Ensure we check rsize/wsize after crossing a NFSv4 filesystem
boundary.
- NFSv4/pnfs: If the server is down, retry the layout returns on reboot
- NFSv4/pnfs: Fallback to MDS could result in a short write being
incorrectly logged.
Cleanups:
- NFS: use memcpy_and_pad in decode_fh
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR8xgHcVzJNfOYElJo6EXfx2a6V0QUCaevSUgAKCRA6EXfx2a6V
0ewIAQD+23uMo5sxY10btKATcBBxswY5YMtN1qQBMyn88N0XfwEAz0+zoEbRv4L2
39goJ/WeJ0/gqhfJV9F+Oe2U1DbsEgM=
=l9y/
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-7.1-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Bugfixes:
- Fix handling of ENOSPC so that if we have to resend writes, they
are written synchronously
- SUNRPC RDMA transport fixes from Chuck
- Several fixes for delegated timestamps in NFSv4.2
- Failure to obtain a directory delegation should not cause stat() to
fail with NFSv4
- Rename was failing to update timestamps when a directory delegation
is held on NFSv4
- Ensure we check rsize/wsize after crossing a NFSv4 filesystem
boundary
- NFSv4/pnfs:
- If the server is down, retry the layout returns on reboot
- Fallback to MDS could result in a short write being incorrectly
logged
Cleanups:
- Use memcpy_and_pad in decode_fh"
* tag 'nfs-for-7.1-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (21 commits)
NFS: Fix RCU dereference of cl_xprt in nfs_compare_super_address
NFS: remove redundant __private attribute from nfs_page_class
NFSv4.2: fix CLONE/COPY attrs in presence of delegated attributes
NFS: fix writeback in presence of errors
nfs: use memcpy_and_pad in decode_fh
NFSv4.1: Apply session size limits on clone path
NFSv4: retry GETATTR if GET_DIR_DELEGATION failed
NFS: fix RENAME attr in presence of directory delegations
pnfs/flexfiles: validate ds_versions_cnt is non-zero
NFS/blocklayout: print each device used for SCSI layouts
xprtrdma: Post receive buffers after RPC completion
xprtrdma: Scale receive batch size with credit window
xprtrdma: Replace rpcrdma_mr_seg with xdr_buf cursor
xprtrdma: Decouple frwr_wp_create from frwr_map
xprtrdma: Close lost-wakeup race in xprt_rdma_alloc_slot
xprtrdma: Avoid 250 ms delay on backlog wakeup
xprtrdma: Close sendctx get/put race that can block a transport
nfs: update inode ctime after removexattr operation
nfs: fix utimensat() for atime with delegated timestamps
NFS: improve "Server wrote zero bytes" error
...
support for per-subvolume data I/O performance and latency tracking
(metadata operations aren't included) and a good variety of fixes and
cleanups across RBD and CephFS.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmnrq1YTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi+WFCACA2Yc6oj6W4yXX2LSGCFCN3FOanSb3
6ZvPeSrmAALzwD9ZXdef6j50An6w05P7kXKmAyKTgmW2tpiRciJs6uT6y7By/aph
uGZCaPoJWPDvTlo8d05MAVuyfoKH5eU8pwx2YiEMN5W6kfo7VJQze6BgLbvQt7yH
ToIzzBLifYONH4vF3nfsHj/uCr38Cbpr6GWY8LIPo8QtInWKJTcwF7HWVVicCaMs
yqf1t+/CWzlIsnnIQtp+aSxWlpoA5lAqWxGt3jSfd3eVTCAL8eDzw5fkbGMRJYgM
paH3kZ+LuJWkRXe2ts/RMrXWLJF3ZWOVD6sWU6sfnXf+vBe4SkiwwcUt
=Ooc5
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-7.1-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"We have a series from Alex which extends CephFS client metrics with
support for per-subvolume data I/O performance and latency tracking
(metadata operations aren't included) and a good variety of fixes and
cleanups across RBD and CephFS"
* tag 'ceph-for-7.1-rc1' of https://github.com/ceph/ceph-client:
ceph: add subvolume metrics collection and reporting
ceph: parse subvolume_id from InodeStat v9 and store in inode
ceph: handle InodeStat v8 versioned field in reply parsing
libceph: Fix slab-out-of-bounds access in auth message processing
rbd: fix null-ptr-deref when device_add_disk() fails
crush: cleanup in crush_do_rule() method
ceph: clear s_cap_reconnect when ceph_pagelist_encode_32() fails
ceph: only d_add() negative dentries when they are unhashed
libceph: update outdated comment in ceph_sock_write_space()
libceph: Remove obsolete session key alignment logic
ceph: fix num_ops off-by-one when crypto allocation fails
libceph: Prevent potential null-ptr-deref in ceph_handle_auth_reply()
- some minor cleanup
-----BEGIN PGP SIGNATURE-----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=miGY
-----END PGP SIGNATURE-----
Merge tag '9p-for-7.1-rc1' of https://github.com/martinetd/linux
Pull 9p updates from Dominique Martinet:
- 9p access flag fix (cannot change access flag since new mount API implem)
- some minor cleanup
* tag '9p-for-7.1-rc1' of https://github.com/martinetd/linux:
9p/trans_xen: replace simple_strto* with kstrtouint
9p/trans_xen: make cleanup idempotent after dataring alloc errors
9p: document missing enum values in kernel-doc comments
9p: fix access mode flags being ORed instead of replaced
9p: fix memory leak in v9fs_init_fs_context error path
Call check_and_init_map_value() after the copy_map_value() to zero out
special field regions. diag_get() copies sk_local_storage map values
into a netlink message using copy_map_value{_locked}(), which
intentionally skip special fields. However, the destination buffer from
nla_reserve_64bit() is not zeroed and the skipped regions contain
uninitialized skb data can be sent to userspace.
Fixes: 1ed4d92458 ("bpf: INET_DIAG support in bpf_sk_storage")
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260423222356.155387-1-ameryhung@gmail.com
Replace unsafe port parsing in epaddr_len(), ct_sip_parse_header_uri(),
and ct_sip_parse_request() with a new sip_parse_port() helper that
validates each digit against the buffer limit, eliminating the use of
simple_strtoul() which assumes NUL-terminated strings.
The previous code dereferenced pointers without bounds checks after
sip_parse_addr() and relied on simple_strtoul() on non-NUL-terminated
skb data. A port that reaches the buffer limit without a trailing
character is also rejected as malformed.
Also get rid of all simple_strtoul() usage in conntrack, prefer a
stricter version instead. There are intentional changes:
- Bail out if number is > UINT_MAX and indicate a failure, same for
too long sequences.
While we do accept 05535 as port 5535, we will not accept e.g.
'sip:10.0.0.1:005060'. While its syntactically valid under RFC 3261,
we should restrict this to not waste cycles when presented with
malformed packets with 64k '0' characters.
- Force base 10 in ct_sip_parse_numerical_param(). This is used to fetch
'expire=' and 'rports='; both are expected to use base-10.
- In nf_nat_sip.c, only accept the parsed value if its within the 1k-64k
range.
- epaddr_len now returns 0 if the port is invalid, as it already does
for invalid ip addresses. This is intentional. nf_conntrack_sip
performs lots of guesswork to find the right parts of the message
to parse. Being stricter could break existing setups.
Connection tracking helpers are designed to allow traffic to
pass, not to block it.
Based on an earlier patch from Jenny Guanni Qu <qguanni@gmail.com>.
Fixes: 05e3ced297 ("[NETFILTER]: nf_conntrack_sip: introduce SIP-URI parsing helper")
Reported-by: Klaudia Kloc <klaudia@vidocsecurity.com>
Reported-by: Dawid Moczadło <dawid@vidocsecurity.com>
Reported-by: Jenny Guanni Qu <qguanni@gmail.com>.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reject zero shift operands for nft_bitwise left and right shift
expressions during initialization.
The carry propagation logic computes the carry from the adjacent 32-bit
word using BITS_PER_TYPE(u32) - shift. A zero shift operand turns this
into a 32-bit shift, which is undefined behaviour.
Reject zero shift operands in the control plane, alongside the existing
check for values greater than or equal to 32, so malformed rules never
reach the packet path.
Fixes: 567d746b55 ("netfilter: bitwise: add support for shifts.")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Kai Ma <k4729.23098@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
match_policy_in() walks sec_path entries from the last transform to the
first one, but strict policy matching needs to consume info->pol[] in
the same forward order as the rule layout.
Derive the strict-match policy position from the number of transforms
already consumed so that multi-element inbound rules are matched
consistently.
Fixes: c4b8851392 ("[NETFILTER]: x_tables: replace IPv4/IPv6 policy match by address family independant version")
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Old code like amateur radio and NFC have long been a burden
to core networking developers. syzbot loves to find bugs
in BKL-era code, and noobs try to fix them.
If we want to have a fighting chance of surviving the LLM-pocalypse
this code needs to find a dedicated owner or get deleted.
We've talked about these deletions multiple times in the past
and every time someone wanted the code to stay. It is never
very clear to me how many of those people actually use the code
vs are just nostalgic to see it go. Amateur radio did have
occasional users (or so I think) but most users switched
to user space implementations since its all super slow stuff.
Nobody stepped up to maintain the kernel code.
We were lucky enough to find someone who wants to help with NFC
so we're giving that a chance. Let's try to put the rest of
this code behind us.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=3vMU
-----END PGP SIGNATURE-----
Merge tag 'net-deletions' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking deletions from Jakub Kicinski:
"Delete some obsolete networking code
Old code like amateur radio and NFC have long been a burden to core
networking developers. syzbot loves to find bugs in BKL-era code, and
noobs try to fix them.
If we want to have a fighting chance of surviving the LLM-pocalypse
this code needs to find a dedicated owner or get deleted. We've talked
about these deletions multiple times in the past and every time
someone wanted the code to stay. It is never very clear to me how many
of those people actually use the code vs are just nostalgic to see it
go. Amateur radio did have occasional users (or so I think) but most
users switched to user space implementations since its all super slow
stuff. Nobody stepped up to maintain the kernel code.
We were lucky enough to find someone who wants to help with NFC so
we're giving that a chance. Let's try to put the rest of this code
behind us"
* tag 'net-deletions' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next:
drivers: net: 8390: wd80x3: Remove this driver
drivers: net: 8390: ultra: Remove this driver
drivers: net: 8390: AX88190: Remove this driver
drivers: net: fujitsu: fmvj18x: Remove this driver
drivers: net: smsc: smc91c92: Remove this driver
drivers: net: smsc: smc9194: Remove this driver
drivers: net: amd: nmclan: Remove this driver
drivers: net: amd: lance: Remove this driver
drivers: net: 3com: 3c589: Remove this driver
drivers: net: 3com: 3c574: Remove this driver
drivers: net: 3com: 3c515: Remove this driver
drivers: net: 3com: 3c509: Remove this driver
net: packetengines: remove obsolete yellowfin driver and vendor dir
net: packetengines: remove obsolete hamachi driver
net: remove unused ATM protocols and legacy ATM device drivers
net: remove ax25 and amateur radio (hamradio) subsystem
net: remove ISDN subsystem and Bluetooth CMTP
caif: remove CAIF NETWORK LAYER
When tot_len is not provided by the user, bpf_skb_fib_lookup()
resolves the FIB result's output device via dev_get_by_index_rcu()
to check skb forwardability and fill in mtu_result. The returned
pointer is dereferenced without a NULL check. If the device is
concurrently unregistered, dev_get_by_index_rcu() returns NULL and
is_skb_forwardable() crashes at dev->flags:
KASAN: null-ptr-deref in range
[0x00000000000000b0-0x00000000000000b7]
Call Trace:
is_skb_forwardable (include/linux/netdevice.h:4365)
bpf_skb_fib_lookup (net/core/filter.c:6446)
bpf_prog_test_run_skb (net/bpf/test_run.c)
__sys_bpf (kernel/bpf/syscall.c)
Add the missing NULL check, returning -ENODEV to be consistent
with how bpf_ipv4_fib_lookup() and bpf_ipv6_fib_lookup() handle
the same condition.
Fixes: 4f74fede40 ("bpf: Add mtu checking to FIB forwarding helper")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://patch.msgid.link/20260423183831.1325480-2-bestswngs@gmail.com
bpf_selem_unlink_nofail() sets SDATA(selem)->smap to NULL before
removing the selem from the storage hlist. A concurrent RCU reader in
bpf_sk_storage_clone() can observe the selem still on the list with
smap already NULL, causing a NULL pointer dereference.
general protection fault, probably for non-canonical address 0xdffffc000000000a:
KASAN: null-ptr-deref in range [0x0000000000000050-0x0000000000000057]
RIP: 0010:bpf_sk_storage_clone+0x1cd/0xaa0 net/core/bpf_sk_storage.c:174
Call Trace:
<IRQ>
sk_clone+0xfed/0x1980 net/core/sock.c:2591
inet_csk_clone_lock+0x30/0x760 net/ipv4/inet_connection_sock.c:1222
tcp_create_openreq_child+0x35/0x2680 net/ipv4/tcp_minisocks.c:571
tcp_v4_syn_recv_sock+0x123/0xf90 net/ipv4/tcp_ipv4.c:1729
tcp_check_req+0x8e1/0x2580 include/net/tcp.h:855
tcp_v4_rcv+0x1845/0x3b80 net/ipv4/tcp_ipv4.c:2347
Add a NULL check for smap in bpf_sk_storage_clone().
bpf_sk_storage_diag_put_all() has the same issue. Add a NULL check
and pass the validated smap directly to diag_get(), which is refactored
to take smap as a parameter instead of reading it internally.
bpf_sk_storage_diag_put() uses diag->maps[i] which is always valid
under its refcount, so diag->maps[i] is passed directly to diag_get().
Fixes: 5d800f87d0 ("bpf: Support lockless unlink when freeing map or local storage")
Reported-by: Xiang Mei <xmei5@asu.edu>
Acked-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260422065411.1007737-2-bestswngs@gmail.com
Steady stream of fixes. Last two weeks feel comparable to the two
weeks before the merge window. Lots of AI-aided bug discovery.
A newer big source is Sashiko/Gemini (Roman Gushchin's system),
which points out issues in existing code during patch review
(maybe 25% of fixes here likely originating from Sashiko).
Nice thing is these are often fixed by the respective maintainers,
not drive-bys.
Current release - new code bugs:
- kconfig: MDIO_PIC64HPSC should depend on ARCH_MICROCHIP
Previous releases - regressions:
- add async ndo_set_rx_mode and switch drivers which we promised
to be called under the per-netdev mutex to it
- dsa: remove duplicate netdev_lock_ops() for conduit ethtool ops
- hv_sock: report EOF instead of -EIO for FIN
- vsock/virtio: fix MSG_PEEK calculation on bytes to copy
Previous releases - always broken:
- ipv6: fix possible UAF in icmpv6_rcv()
- icmp: validate reply type before using icmp_pointers
- af_unix: drop all SCM attributes for SOCKMAP
- netfilter: fix a number of bugs in the osf (OS fingerprinting)
- eth: intel: fix timestamp interrupt configuration for E825C
Misc:
- bunch of data-race annotations
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=knNy
-----END PGP SIGNATURE-----
Merge tag 'net-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter.
Steady stream of fixes. Last two weeks feel comparable to the two
weeks before the merge window. Lots of AI-aided bug discovery. A newer
big source is Sashiko/Gemini (Roman Gushchin's system), which points
out issues in existing code during patch review (maybe 25% of fixes
here likely originating from Sashiko). Nice thing is these are often
fixed by the respective maintainers, not drive-bys.
Current release - new code bugs:
- kconfig: MDIO_PIC64HPSC should depend on ARCH_MICROCHIP
Previous releases - regressions:
- add async ndo_set_rx_mode and switch drivers which we promised to
be called under the per-netdev mutex to it
- dsa: remove duplicate netdev_lock_ops() for conduit ethtool ops
- hv_sock: report EOF instead of -EIO for FIN
- vsock/virtio: fix MSG_PEEK calculation on bytes to copy
Previous releases - always broken:
- ipv6: fix possible UAF in icmpv6_rcv()
- icmp: validate reply type before using icmp_pointers
- af_unix: drop all SCM attributes for SOCKMAP
- netfilter: fix a number of bugs in the osf (OS fingerprinting)
- eth: intel: fix timestamp interrupt configuration for E825C
Misc:
- bunch of data-race annotations"
* tag 'net-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (148 commits)
rxrpc: Fix error handling in rxgk_extract_token()
rxrpc: Fix re-decryption of RESPONSE packets
rxrpc: Fix rxrpc_input_call_event() to only unshare DATA packets
rxrpc: Fix missing validation of ticket length in non-XDR key preparsing
rxgk: Fix potential integer overflow in length check
rxrpc: Fix conn-level packet handling to unshare RESPONSE packets
rxrpc: Fix potential UAF after skb_unshare() failure
rxrpc: Fix rxkad crypto unalignment handling
rxrpc: Fix memory leaks in rxkad_verify_response()
net: rds: fix MR cleanup on copy error
m68k: mvme147: Make me the maintainer
net: txgbe: fix firmware version check
selftests/bpf: check epoll readiness during reuseport migration
tcp: call sk_data_ready() after listener migration
vhost_net: fix sleeping with preempt-disabled in vhost_net_busy_poll()
ipv6: Cap TLV scan in ip6_tnl_parse_tlv_enc_lim
tipc: fix double-free in tipc_buf_append()
llc: Return -EINPROGRESS from llc_ui_connect()
ipv4: icmp: validate reply type before using icmp_pointers
selftests/net: packetdrill: cover RFC 5961 5.2 challenge ACK on both edges
...
If a RESPONSE packet gets a temporary failure during processing, it may end
up in a partially decrypted state - and then get requeued for a retry.
Fix this by just discarding the packet; we will send another CHALLENGE
packet and thereby elicit a further response. Similarly, discard an
incoming CHALLENGE packet if we get an error whilst generating a RESPONSE;
the server will send another CHALLENGE.
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Closes: https://sashiko.dev/#/patchset/20260422161438.2593376-4-dhowells@redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260423200909.3049438-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In rxrpc_preparse(), there are two paths for parsing key payloads: the
XDR path (for large payloads) and the non-XDR path (for payloads <= 28
bytes). While the XDR path (rxrpc_preparse_xdr_rxkad()) correctly
validates the ticket length against AFSTOKEN_RK_TIX_MAX, the non-XDR
path fails to do so.
This allows an unprivileged user to provide a very large ticket length.
When this key is later read via rxrpc_read(), the total
token size (toksize) calculation results in a value that exceeds
AFSTOKEN_LENGTH_MAX, triggering a WARN_ON().
[ 2001.302904] WARNING: CPU: 2 PID: 2108 at net/rxrpc/key.c:778 rxrpc_read+0x109/0x5c0 [rxrpc]
Fix this by adding a check in the non-XDR parsing path of rxrpc_preparse()
to ensure the ticket length does not exceed AFSTOKEN_RK_TIX_MAX,
bringing it into parity with the XDR parsing logic.
Fixes: 8a7a3eb4dd ("KEYS: RxRPC: Use key preparsing")
Fixes: 84924aac08 ("rxrpc: Fix checker warning")
Reported-by: Anderson Nascimento <anderson@allelesecurity.com>
Signed-off-by: Anderson Nascimento <anderson@allelesecurity.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260422161438.2593376-7-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The security operations that verify the RESPONSE packets decrypt bits of it
in place - however, the sk_buff may be shared with a packet sniffer, which
would lead to the sniffer seeing an apparently corrupt packet (actually
decrypted).
Fix this by handing a copy of the packet off to the specific security
handler if the packet was cloned.
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Closes: https://sashiko.dev/#/patchset/20260408121252.2249051-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260422161438.2593376-5-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If skb_unshare() fails to unshare a packet due to allocation failure in
rxrpc_input_packet(), the skb pointer in the parent (rxrpc_io_thread())
will be NULL'd out. This will likely cause the call to
trace_rxrpc_rx_done() to oops.
Fix this by moving the unsharing down to where rxrpc_input_call_event()
calls rxrpc_input_call_packet(). There are a number of places prior to
that where we ignore DATA packets for a variety of reasons (such as the
call already being complete) for which an unshare is then avoided.
And with that, rxrpc_input_packet() doesn't need to take a pointer to the
pointer to the packet, so change that to just a pointer.
Fixes: 2d1faf7a0c ("rxrpc: Simplify skbuff accounting in receive path")
Closes: https://sashiko.dev/#/patchset/20260408121252.2249051-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260422161438.2593376-4-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix rxkad_verify_response() to free the ticket and the server key under all
circumstances by initialising the ticket pointer to NULL and then making
all paths through the function after the first allocation has been done go
through a single common epilogue that just releases everything - where all
the releases skip on a NULL pointer.
Fixes: 57af281e53 ("rxrpc: Tidy up abort generation infrastructure")
Fixes: ec832bd06d ("rxrpc: Don't retain the server key in the connection")
Closes: https://sashiko.dev/#/patchset/20260408121252.2249051-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260422161438.2593376-2-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__rds_rdma_map() hands sg/pages ownership to the transport after
get_mr() succeeds. If copying the generated cookie back to user space
fails after that point, the error path must not free those resources
again before dropping the MR reference.
Remove the duplicate unpin/free from the put_user() failure branch so
that MR teardown is handled only through the existing final cleanup
path.
Fixes: 0d4597c8c5 ("net/rds: Track user mapped pages through special API")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Ao Zhou <draw51280@163.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/79c8ef73ec8e5844d71038983940cc2943099baf.1776764247.git.draw51280@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When inet_csk_listen_stop() migrates an established child socket from
a closing listener to another socket in the same SO_REUSEPORT group,
the target listener gets a new accept-queue entry via
inet_csk_reqsk_queue_add(), but that path never notifies the target
listener's waiters. A nonblocking accept() still works because it
checks the queue directly, but poll()/epoll_wait() waiters and
blocking accept() callers can also remain asleep indefinitely.
Call READ_ONCE(nsk->sk_data_ready)(nsk) after a successful migration
in inet_csk_listen_stop().
However, after inet_csk_reqsk_queue_add() succeeds, the ref acquired
in reuseport_migrate_sock() is effectively transferred to
nreq->rsk_listener. Another CPU can then dequeue nreq via accept()
or listener shutdown, hit reqsk_put(), and drop that listener ref.
Since listeners are SOCK_RCU_FREE, wrap the post-queue_add()
dereferences of nsk in rcu_read_lock()/rcu_read_unlock(), which also
covers the existing sock_net(nsk) access in that path.
The reqsk_timer_handler() path does not need the same changes for two
reasons: half-open requests become readable only after the final ACK,
where tcp_child_process() already wakes the listener; and once nreq is
visible via inet_ehash_insert(), the success path no longer touches
nsk directly.
Fixes: 54b92e8419 ("tcp: Migrate TCP_ESTABLISHED/TCP_SYN_RECV sockets in accept queues.")
Cc: stable@vger.kernel.org
Suggested-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Zhenzhong Wu <jt26wzz@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260422024554.130346-2-jt26wzz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 47d3d7ac65 ("ipv6: Implement limits on Hop-by-Hop and
Destination options") added net.ipv6.max_{hbh,dst}_opts_{cnt,len}
and applied them in ip6_parse_tlv(), the generic TLV walker
invoked from ipv6_destopt_rcv() and ipv6_parse_hopopts().
ip6_tnl_parse_tlv_enc_lim() does not go through ip6_parse_tlv();
it has its own hand-rolled TLV scanner inside its NEXTHDR_DEST
branch which looks for IPV6_TLV_TNL_ENCAP_LIMIT. That inner
loop is bounded only by optlen, which can be up to 2048 bytes.
Stuffing the Destination Options header with 2046 Pad1 (type=0)
entries advances the scanner a single byte at a time, yielding
~2000 TLV iterations per extension header.
Reusing max_dst_opts_cnt to bound the TLV iterations, matching
the semantics from 47d3d7ac65, would require duplicating
ip6_parse_tlv() to also validate Pad1/PadN payload. It would
also mandate enforcing max_dst_opts_len, since otherwise an
attacker shifts the axis to few options with a giant PadN and
recovers the original DoS. Allowing up to 8 options before the
tunnel encapsulation limit TLV is liberal enough; in practice
encap limit is the first TLV. Thus, go with a hard-coded limit
IP6_TUNNEL_MAX_DEST_TLVS (8).
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Justin Iurman <justin.iurman@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tipc_msg_validate() can potentially reallocate the skb it is validating,
freeing the old one. In tipc_buf_append(), it was being called with a
pointer to a local variable which was a copy of the caller's skb
pointer.
If the skb was reallocated and validation subsequently failed, the error
handling path would free the original skb pointer, which had already
been freed, leading to double-free.
Fix this by checking if head now points to a newly allocated reassembled
skb. If it does, reassign *headbuf for later freeing operations.
Fixes: d618d09a68 ("tipc: enforce valid ratio between skb truesize and contents")
Suggested-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Signed-off-by: Lee Jones <lee@kernel.org>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Given a zero sk_sndtimeo, llc_ui_connect() skips waiting for state
change and returns 0, confusing userspace applications that will assume
the socket is connected, making e.g. getpeername() calls error out.
More specifically, the issue was discovered in libcoap, where
newly-added AF_LLC socket support was behaving differently from AF_INET
connections due to EINPROGRESS handling being skipped.
Set rc to -EINPROGRESS if connect() would not block, akin to AF_INET
sockets.
Signed-off-by: Ernestas Kulik <ernestas.k@iconn-networks.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260421060304.285419-1-ernestas.k@iconn-networks.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extended echo replies use ICMP_EXT_ECHOREPLY as the outbound reply type.
That value is outside the range covered by icmp_pointers[], which only
describes the traditional ICMP types up to NR_ICMP_TYPES.
Avoid consulting icmp_pointers[] for reply types outside that range, and
use array_index_nospec() for the remaining in-range lookup. Normal ICMP
replies keep their existing behavior unchanged.
Fixes: d329ea5bd8 ("icmp: add response to RFC 8335 PROBE messages")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Ruide Cao <caoruide123@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/0dace90c01a5978e829ca741ef684dbd7304ce62.1776628519.git.caoruide123@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RFC 5961 Section 5.2 validates an incoming segment's ACK value
against the range [SND.UNA - MAX.SND.WND, SND.NXT] and states:
"All incoming segments whose ACK value doesn't satisfy the above
condition MUST be discarded and an ACK sent back."
Commit 354e4aa391 ("tcp: RFC 5961 5.2 Blind Data Injection Attack
Mitigation") opted Linux into this mitigation and implements the
challenge ACK on the lower side (SEG.ACK < SND.UNA - MAX.SND.WND),
but the symmetric upper side (SEG.ACK > SND.NXT) still takes the
pre-RFC-5961 path and silently returns
SKB_DROP_REASON_TCP_ACK_UNSENT_DATA, even though RFC 793 Section 3.9
(now RFC 9293 Section 3.10.7.4) has always required:
"If the ACK acknowledges something not yet sent (SEG.ACK > SND.NXT)
then send an ACK, drop the segment, and return."
Complete the mitigation by sending a challenge ACK on that branch,
reusing the existing tcp_send_challenge_ack() path which already
enforces the per-socket RFC 5961 Section 7 rate limit via
__tcp_oow_rate_limited(). FLAG_NO_CHALLENGE_ACK is honoured for
symmetry with the lower-edge case.
Update the existing tcp_ts_recent_invalid_ack.pkt selftest, which
drives this exact path, to consume the new challenge ACK.
Fixes: 354e4aa391 ("tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260422123605.320000-2-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A CLC decline can be received while the handshake is still in an early
stage, before the connection has been associated with a link group.
The decline handling in smc_clc_wait_msg() updates link-group level sync
state for first-contact declines, but that state only exists after link
group setup has completed. Guard the link-group update accordingly and
keep the per-socket peer diagnosis handling unchanged.
This preserves the existing sync_err handling for established link-group
contexts and avoids touching link-group state before it is available.
Fixes: 0cfdd8f92c ("smc: connection and link group creation")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Ruijie Li <ruijieli51@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Link: https://patch.msgid.link/08c68a5c817acf198cce63d22517e232e8d60718.1776850759.git.ruijieli51@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit f631529589 fixes a regression, however it fails to report an
error for malformed/short packets -- normally we should never see such
packets, but let's report an error for them just in case.
Fixes: f631529589 ("hv_sock: Report EOF instead of -EIO for FIN")
Cc: stable@vger.kernel.org
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260423064811.1371749-1-decui@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the amateur radio (AX.25, NET/ROM, ROSE) protocol implementation
and all associated hamradio device drivers from the kernel tree.
This set of protocols has long been a huge bug/syzbot magnet,
and since nobody stepped up to help us deal with the influx
of the AI-generated bug reports we need to move it out of tree
to protect our sanity.
The code is moved to an out-of-tree repo:
https://github.com/linux-netdev/mod-orphan
if it's cleaned up and reworked there we can accept it back.
Minimal stub headers are kept for include/net/ax25.h (AX25_P_IP,
AX25_ADDR_LEN, ax25_address) and include/net/rose.h (ROSE_ADDR_LEN)
so that the conditional integration code in arp.c and tun.c continues
to compile and work when the out-of-tree modules are loaded.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Carlos Bilbao <carlos.bilbao@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260421021824.1293976-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Remove the ISDN (mISDN, CAPI) subsystem and Bluetooth CMTP protocol
from the kernel tree.
ISDN is a pretty old technology and it's unclear whether anyone still
uses it. I went over the last few years of git history and all the
commits are either tree-wide conversions or syzbot/static analyzer
fixes.
When we discussed removal in the past IIRC there were some concerns
about ISDN still being used in parts of Germany. Unfortunately, the
code base is quite old, none of the current maintainers are familiar
with it and AI tools will have a field day finding bugs here.
Delete this code and preserve it in an out-of-tree repository
for any remaining users:
https://github.com/linux-netdev/mod-orphan
UAPI constants AF_ISDN/PF_ISDN and the SELinux isdn_socket class
are preserved for ABI stability, but the rest of uAPI is removed.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260421022108.1299678-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Remove CAIF (Communication CPU to Application CPU Interface), the
ST-Ericsson modem protocol. The subsystem has been orphaned since 2013.
The last meaningful changes from the maintainers were in March 2013:
a8c7687bf2 ("caif_virtio: Check that vringh_config is not null")
b2273be8d2 ("caif_virtio: Use vringh_notify_enable correctly")
0d2e1a2926 ("caif_virtio: Introduce caif over virtio")
Not-so-coincidentally, according to "the Internet" ST-Ericsson officially
shut down its modem joint venture in Aug 2013.
If anyone is using this code please yell!
In the 13 years since, the code has accumulated 200 non-merge commits,
of which 71 were cross-tree API changes, 21 carried Fixes: tags, and
the remaining ~110 were cleanups, doc conversions, treewide refactors,
and one partial removal (caif_hsi, ca75bcf0a8).
We are still getting fixes to this code, in the last 10 days there were
3 reports on security@ about CAIF that I have been CCed on.
UAPI constants (AF_CAIF, ARPHRD_CAIF, N_CAIF, VIRTIO_ID_CAIF) and the
SELinux classmap entry are intentionally kept for ABI stability.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260416182829.1440262-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On passive MPTCP connections, the msk sndbuf is not updated correctly.
The root cause is an order issue in the accept path:
- tcp_check_req() -> subflow_syn_recv_sock() -> mptcp_sk_clone_init()
calls __mptcp_propagate_sndbuf() to copy the ssk sndbuf into msk
- Later, tcp_child_process() -> tcp_init_transfer() ->
tcp_sndbuf_expand() grows the ssk sndbuf.
So __mptcp_propagate_sndbuf() runs before the ssk sndbuf has been
expanded and the msk ends up with a much smaller sndbuf than the
subflow:
MPTCP: msk->sndbuf:20480, msk->first->sndbuf:2626560
Fix this by moving the __mptcp_propagate_sndbuf() call from
mptcp_sk_clone_init() -- the ssk sndbuf is not yet finalized there -- to
__mptcp_propagate_sndbuf() at accept() time, when the ssk sndbuf has
been fully expanded by tcp_sndbuf_expand().
Fixes: 8005184fd1 ("mptcp: refactor sndbuf auto-tuning")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/602
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260420-net-mptcp-sync-sndbuf-accept-v1-1-e3523e3aeb44@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
virtio_transport_init_zcopy_skb() uses iter->count as the size argument
for msg_zerocopy_realloc(), which in turn passes it to
mm_account_pinned_pages() for RLIMIT_MEMLOCK accounting. However, this
function is called after virtio_transport_fill_skb() has already consumed
the iterator via __zerocopy_sg_from_iter(), so on the last skb, iter->count
will be 0, skipping the RLIMIT_MEMLOCK enforcement.
Pass pkt_len (the total bytes being sent) as an explicit parameter to
virtio_transport_init_zcopy_skb() instead of reading the already-consumed
iter->count.
This matches TCP and UDP, which both call msg_zerocopy_realloc() with
the original message size.
Fixes: 581512a6dc ("vsock/virtio: MSG_ZEROCOPY flag support")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260420132051.217589-1-sgarzare@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
vlan_dev_set_egress_priority() currently keeps cleared egress
priority mappings in the hash as tombstones. Repeated set/clear cycles
with distinct skb priorities therefore accumulate mapping nodes until
device teardown and leak memory.
Delete mappings when vlan_prio is cleared instead of keeping tombstones.
Now that the egress mapping lists are RCU protected, the node can be
unlinked safely and freed after a grace period.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@kernel.org
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Longxuan Yu <ylong030@ucr.edu>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Link: https://patch.msgid.link/ecfa6f6ce2467a42647ff4c5221238ae85b79a59.1776647968.git.yuantan098@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The TX fast path and reporting paths walk egress QoS mappings without
RTNL. Convert the mapping lists to RCU-protected pointers, use RCU
reader annotations in readers, and defer freeing mapping nodes with an
embedded rcu_head.
This prepares the egress QoS mapping code for safe removal of mapping
nodes in a follow-up change while preserving the current behavior.
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Longxuan Yu <ylong030@ucr.edu>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Link: https://patch.msgid.link/9136768189f8c6d3f824f476c62d2fa1111688e8.1776647968.git.yuantan098@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=6RJG
-----END PGP SIGNATURE-----
Merge tag 'nf-26-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following batch contains Netfilter/IPVS fixes for net:
1) nft_osf actually only supports IPv4, restrict it.
2) Address possible division by zero in nfnetlink_osf, from Xiang Mei.
3) Remove unsafe use of sprintf to fix possible buffer overflow
in the SIP NAT helper, from Florian Westphal.
4) Restrict xt_mac, xt_owner and xt_physdev to inet families only;
xt_realm is only for ipv4, otherwise null-pointer-deref is possible.
5) Use kfree_rcu() in nat core to release hooks, this can be an issue
once nfnetlink_hook gets support to dump NAT hook information, not
currently a real issue but better fix it now. From Florian Westphal.
6) Fix MTU checks in IPVS, from Yingnan Zhang.
7) Fix possible out-of-bounds when matching TCP options in
nfnetlink_osf, from Fernando Fernandez Mancera.
8) Fix potential nul-ptr-deref in ttl check in nfnetlink_osf,
remove useless loop to fix this, also from Fernando.
This is a smaller batch, there are more patches pending in the queue
to arm another pull request as soon as this is considered good enough.
AI might complain again about one more issue regarding osf and
big-endian arches in osf but this batch is targetting crash fixes for
osf at this stage.
netfilter pull request 26-04-20
* tag 'nf-26-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nfnetlink_osf: fix potential NULL dereference in ttl check
netfilter: nfnetlink_osf: fix out-of-bounds read on option matching
ipvs: fix MTU check for GSO packets in tunnel mode
netfilter: nat: use kfree_rcu to release ops
netfilter: xtables: restrict several matches to inet family
netfilter: conntrack: remove sprintf usage
netfilter: nfnetlink_osf: fix divide-by-zero in OSF_WSS_MODULO
netfilter: nft_osf: restrict it to ipv4
====================
Link: https://patch.msgid.link/20260420220215.111510-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
sfb_dump_stats() only runs with RTNL held,
reading fields that can be changed in qdisc fast path.
Add READ_ONCE()/WRITE_ONCE() annotations.
Alternative would be to acquire the qdisc spinlock, but our long-term
goal is to make qdisc dump operations lockless as much as we can.
tc_sfb_xstats fields don't need to be latched atomically,
otherwise this bug would have been caught earlier.
Fixes: edb09eb17e ("net: sched: do not acquire qdisc spinlock in qdisc/class stats dump")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260421141655.3953721-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
red_dump_stats() only runs with RTNL held,
reading fields that can be changed in qdisc fast path.
Add READ_ONCE()/WRITE_ONCE() annotations.
Alternative would be to acquire the qdisc spinlock, but our long-term
goal is to make qdisc dump operations lockless as much as we can.
tc_red_xstats fields don't need to be latched atomically,
otherwise this bug would have been caught earlier.
Fixes: edb09eb17e ("net: sched: do not acquire qdisc spinlock in qdisc/class stats dump")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260421142309.3964322-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fq_codel_dump_stats() acquires the qdisc spinlock a bit too late.
Move this acquisition before we fill st.qdisc_stats with live data.
Fixes: edb09eb17e ("net: sched: do not acquire qdisc spinlock in qdisc/class stats dump")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260421142509.3967231-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pie_dump_stats() only runs with RTNL held,
reading fields that can be changed in qdisc fast path.
Add READ_ONCE()/WRITE_ONCE() annotations.
Alternative would be to acquire the qdisc spinlock, but our long-term
goal is to make qdisc dump operations lockless as much as we can.
tc_pie_xstats fields don't need to be latched atomically,
otherwise this bug would have been caught earlier.
Fixes: edb09eb17e ("net: sched: do not acquire qdisc spinlock in qdisc/class stats dump")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260421142944.4009941-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
hhf_dump_stats() only runs with RTNL held,
reading fields that can be changed in qdisc fast path.
Add READ_ONCE()/WRITE_ONCE() annotations.
Fixes: edb09eb17e ("net: sched: do not acquire qdisc spinlock in qdisc/class stats dump")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260421143349.4052215-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rds_for_each_conn_info() and rds_walk_conn_path_info() both hand a
caller-allocated on-stack u64 buffer to a per-connection visitor and
then copy the full item_len bytes back to user space via
rds_info_copy() regardless of how much of the buffer the visitor
actually wrote.
rds_ib_conn_info_visitor() and rds6_ib_conn_info_visitor() only
write a subset of their output struct when the underlying
rds_connection is not in state RDS_CONN_UP (src/dst addr, tos, sl
and the two GIDs via explicit memsets). Several u32 fields
(max_send_wr, max_recv_wr, max_send_sge, rdma_mr_max, rdma_mr_size,
cache_allocs) and the 2-byte alignment hole between sl and
cache_allocs remain as whatever stack contents preceded the visitor
call and are then memcpy_to_user()'d out to user space.
struct rds_info_rdma_connection and struct rds6_info_rdma_connection
are the only rds_info_* structs in include/uapi/linux/rds.h that are
not marked __attribute__((packed)), so they have a real alignment
hole. The other info visitors (rds_conn_info_visitor,
rds6_conn_info_visitor, rds_tcp_tc_info, ...) write all fields of
their packed output struct today and are not known to be vulnerable,
but a future visitor that adds a conditional write-path would have
the same bug.
Reproduction on a kernel built without CONFIG_INIT_STACK_ALL_ZERO=y:
a local unprivileged user opens AF_RDS, sets SO_RDS_TRANSPORT=IB,
binds to a local address on an RDMA-capable netdev (rxe soft-RoCE on
any netdev is sufficient), sendto()'s any peer on the same subnet
(fails cleanly but installs an rds_connection in the global hash in
RDS_CONN_CONNECTING), then calls getsockopt(SOL_RDS,
RDS_INFO_IB_CONNECTIONS). The returned 68-byte item contains 26
bytes of stack garbage including kernel text/data pointers:
0..7 0a 63 00 01 0a 63 00 02 src=10.99.0.1 dst=10.99.0.2
8..39 00 ... gids (memset-zeroed)
40..47 e0 92 a3 81 ff ff ff ff kernel pointer (max_send_wr)
48..55 7f 37 b5 81 ff ff ff ff kernel pointer (rdma_mr_max)
56..59 01 00 08 00 rdma_mr_size (garbage)
60..61 00 00 tos, sl
62..63 00 00 alignment padding
64..67 18 00 00 00 cache_allocs (garbage)
Fix by zeroing the per-item buffer in both rds_for_each_conn_info()
and rds_walk_conn_path_info() before invoking the visitor. This
covers the IPv4/IPv6 IB visitors and hardens all current and future
visitors against the same class of bug.
No functional change for visitors that fully populate their output.
Changes in v2:
- retarget at the net tree (subject prefix "[PATCH net v2]",
net/rds: prefix in the title)
- pick up Reviewed-by tags from Sharath Srinivasan and
Allison Henderson
Fixes: ec16227e14 ("RDS/IB: Infiniband transport")
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Sharath Srinivasan <sharath.srinivasan@oracle.com>
Reviewed-by: Allison Henderson <achender@kernel.org>
Assisted-by: Claude:claude-opus-4-7
Link: https://patch.msgid.link/20260418141047.3398203-1-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When SEG6_IPTUN_MODE_L2ENCAP_RED (L2ENCAP_RED) was introduced, the
condition in seg6_build_state() that excludes L2 encap modes from
setting LWTUNNEL_STATE_OUTPUT_REDIRECT was not updated to account for
the new mode.
As a consequence, L2ENCAP_RED routes incorrectly trigger seg6_output()
on the output path, where the packet is silently dropped because
skb_mac_header_was_set() fails on L3 packets.
Extend the check to also exclude L2ENCAP_RED, consistent with L2ENCAP.
Fixes: 13f0296be8 ("seg6: add support for SRv6 H.L2Encaps.Red behavior")
Cc: stable@vger.kernel.org
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: Justin Iurman <justin.iurman@gmail.com>
Link: https://patch.msgid.link/20260418162838.31979-1-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk_clone() increments sockets_allocated and sets the socket refcount to 2.
SCTP performs additional accounting in sctp_clone_sock(), so the clone-time
increment must be undone to avoid double counting.
Note we cannot simply remove the SCTP-side increment, because the SCTP
destroy path in sctp_destroy_sock() only decrements sockets_allocated when
sp->ep is set, which may not be true for all failure paths in
sctp_clone_sock().
Fixes: 16942cf4d3 ("sctp: Use sk_clone() in sctp_accept().")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/af8d66f928dec3e9fcbee8d4a85b7d5a6b86f515.1776460180.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In tpacket_snd(), when PACKET_VNET_HDR is enabled, vnet_hdr points
directly into the mmap'd TX ring buffer shared with userspace. The
kernel validates the header via __packet_snd_vnet_parse() but then
re-reads all fields later in virtio_net_hdr_to_skb(). A concurrent
userspace thread can modify the vnet_hdr fields between validation
and use, bypassing all safety checks.
The non-TPACKET path (packet_snd()) already correctly copies vnet_hdr
to a stack-local variable. All other vnet_hdr consumers in the kernel
(tun.c, tap.c, virtio_net.c) also use stack copies. The TPACKET TX
path is the only caller of virtio_net_hdr_to_skb() that reads directly
from user-controlled shared memory.
Fix this by copying vnet_hdr from the mmap'd ring buffer to a
stack-local variable before validation and use, consistent with the
approach used in packet_snd() and all other callers.
Fixes: 1d036d25e5 ("packet: tpacket_snd gso and checksum offload")
Signed-off-by: Bingquan Chen <patzilla007@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260418112006.78823-1-patzilla007@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rework __bpf_trace_run() to support sleepable BPF programs by using
explicit RCU flavor selection, following the uprobe_prog_run() pattern.
For sleepable programs, use rcu_read_lock_tasks_trace() for lifetime
protection with migrate_disable(). For non-sleepable programs, use the
regular rcu_read_lock_dont_migrate().
Remove the preempt_disable_notrace/preempt_enable_notrace pair from
the faultable tracepoint BPF probe wrapper in bpf_probe.h, since
migration protection and RCU locking are now handled per-program
inside __bpf_trace_run().
Adapt bpf_prog_test_run_raw_tp() for sleepable programs: reject
BPF_F_TEST_RUN_ON_CPU since sleepable programs cannot run in hardirq
or preempt-disabled context, and call __bpf_prog_test_run_raw_tp()
directly instead of via smp_call_function_single(). Rework
__bpf_prog_test_run_raw_tp() to select RCU flavor per-program and
add per-program recursion context guard for private stack safety.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20260422-sleepable_tracepoints-v13-1-99005dff21ef@meta.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
A BPF TCP congestion control program can call bpf_setsockopt() from
its callbacks. In current kernels, if it calls
bpf_setsockopt(TCP_NODELAY) from cwnd_event_tx_start(), the call can
re-enter the TCP transmit path before the outer tcp_transmit_skb()
has completed and advanced the send head.
This can re-trigger CA_EVENT_TX_START and lead to unbounded recursion:
tcp_transmit_skb()
-> tcp_event_data_sent()
-> tcp_ca_event(sk, CA_EVENT_TX_START)
-> cwnd_event_tx_start()
-> bpf_setsockopt(TCP_NODELAY)
-> tcp_push_pending_frames()
-> tcp_write_xmit()
-> tcp_transmit_skb()
This leads to unbounded recursion and can overflow the kernel stack.
Reject TCP_NODELAY with -EOPNOTSUPP for bpf-tcp-cc by introducing
a dedicated setsockopt proto for BPF_PROG_TYPE_STRUCT_OPS TCP
congestion control programs. To keep it simple, all tcp-cc ops is
rejected for TCP_NODELAY.
Fixes: 7e41df5dbb ("bpf: Add a few optnames to bpf_setsockopt")
Suggested-by: Martin KaFai Lau <martin.lau@linux.dev>
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://patch.msgid.link/20260421155804.135786-3-kafai.wan@linux.dev
A BPF_SOCK_OPS program can enable
BPF_SOCK_OPS_WRITE_HDR_OPT_CB_FLAG and then call
bpf_setsockopt(TCP_NODELAY) from BPF_SOCK_OPS_HDR_OPT_LEN_CB or
BPF_SOCK_OPS_WRITE_HDR_OPT_CB.
In these callbacks, bpf_setsockopt(TCP_NODELAY) can reach
__tcp_sock_set_nodelay(), which can call tcp_push_pending_frames().
>From BPF_SOCK_OPS_HDR_OPT_LEN_CB, tcp_push_pending_frames() can call
tcp_current_mss(), which calls tcp_established_options() and re-enters
bpf_skops_hdr_opt_len().
BPF_SOCK_OPS_HDR_OPT_LEN_CB
-> bpf_setsockopt(TCP_NODELAY)
-> tcp_push_pending_frames()
-> tcp_current_mss()
-> tcp_established_options()
-> bpf_skops_hdr_opt_len()
-> BPF_SOCK_OPS_HDR_OPT_LEN_CB
>From BPF_SOCK_OPS_WRITE_HDR_OPT_CB, tcp_push_pending_frames() can call
tcp_write_xmit(), which calls tcp_transmit_skb(). That path recomputes
header option length through tcp_established_options() and
bpf_skops_hdr_opt_len() before re-entering bpf_skops_write_hdr_opt().
BPF_SOCK_OPS_WRITE_HDR_OPT_CB
-> bpf_setsockopt(TCP_NODELAY)
-> tcp_push_pending_frames()
-> tcp_write_xmit()
-> tcp_transmit_skb()
-> tcp_established_options()
-> bpf_skops_hdr_opt_len()
-> bpf_skops_write_hdr_opt()
-> BPF_SOCK_OPS_WRITE_HDR_OPT_CB
This leads to unbounded recursion and can overflow the kernel stack.
Reject TCP_NODELAY with -EOPNOTSUPP in bpf_sock_ops_setsockopt()
when bpf_setsockopt() is called from
BPF_SOCK_OPS_HDR_OPT_LEN_CB or BPF_SOCK_OPS_WRITE_HDR_OPT_CB.
Fixes: 7e41df5dbb ("bpf: Add a few optnames to bpf_setsockopt")
Closes: https://lore.kernel.org/bpf/d1d523c9-6901-4454-a183-94462b8f3e4e@std.uestc.edu.cn/
Reported-by: Quan Sun <2022090917019@std.uestc.edu.cn>
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://patch.msgid.link/20260421155804.135786-2-kafai.wan@linux.dev
If a (potentially corrupted) message of type CEPH_MSG_AUTH_REPLY
contains a positive value in its result field, it is treated as an
error code by ceph_handle_auth_reply() and returned to
handle_auth_reply(). Thereafter, an attempt is made to send the
preallocated message of type CEPH_MSG_AUTH, where the returned value is
interpreted as the size of the front segment to send. If the result
value in the message is greater than the size of the memory buffer
allocated for the front segment, an out-of-bounds access occurs, and
the content of the memory region beyond this buffer is sent out.
This patch fixes the issue by treating only negative values in the
result field as errors. Positive values are therefore treated as success
in the same way as a zero value. Additionally, a BUG_ON is added to
__send_prepared_auth_request() comparing the len parameter to
front_alloc_len to prevent sending the message if it exceeds the bounds
of the allocation and to make it easier to catch any logic flaws leading
to this.
Cc: stable@vger.kernel.org
Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Commit 41ebcc0907 ("crush: remove forcefeed functionality") from
May 7, 2012 (linux-next), leads to the following Smatch static
checker warning:
net/ceph/crush/mapper.c:1015 crush_do_rule()
warn: iterator 'j' not incremented
Before commit 41ebcc0907 ("crush: remove forcefeed functionality"),
we had this logic:
j = 0;
if (osize == 0 && force_pos >= 0) {
o[osize] = force_context[force_pos];
if (recurse_to_leaf)
c[osize] = force_context[0];
j++; /* <-- this was the only increment, now gone */
force_pos--;
}
/* then crush_choose_*(..., o+osize, j, ...) */
Now, the variable j is dead code — a variable that is set
and never meaningfully varied. This patch simply removes
the dead code.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The function try_write() was renamed to ceph_con_v1_try_write()
in commit 566050e17e ("libceph: separate msgr1 protocol
implementation") and subsequently moved to net/ceph/messenger_v1.c
in commit 2f713615dd ("libceph: move msgr1 protocol implementation
to its own file"). Update the comment in ceph_sock_write_space()
accordingly.
[ idryomov: account for msgr2 in the updated comment as well ]
Signed-off-by: kexinsun <kexinsun@smail.nju.edu.cn>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Since the call to crypto_shash_setkey() was replaced with
hmac_sha256_preparekey() which doesn't allocate memory regardless of the
alignment of the input key, remove the session key alignment logic from
process_auth_done(). Also remove the inclusion of crypto/hash.h, which
is no longer needed since crypto_shash is no longer used.
[ idryomov: rewrap comment ]
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If a message of type CEPH_MSG_AUTH_REPLY contains a zero value for both
protocol and result, this is currently not treated as an error. In case
of ac->negotiating == true and ac->protocol > 0, this leads to setting
ac->protocol = 0 and ac->ops = NULL. Thereafter, the check for
ac->protocol != protocol returns false, and init_protocol() is not
called. Subsequently, ac->ops->handle_reply() is called, which leads to
a null pointer dereference, because ac->ops is still NULL.
This patch changes the check for ac->protocol != protocol to
!ac->protocol, as this also includes the case when the protocol was set
to zero in the message. This causes the message to be treated as
containing a bad auth protocol.
Cc: stable@vger.kernel.org
Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Fix dualpi2_change() to correctly enforce updated limit and memlimit
values after a configuration change of the dualpi2 qdisc.
Before this patch, dualpi2_change() always attempted to dequeue packets
via the root qdisc (C-queue) when reducing backlog or memory usage, and
unconditionally assumed that a valid skb will be returned. When traffic
classification results in packets being queued in the L-queue while the
C-queue is empty, this leads to a NULL skb dereference during limit or
memlimit enforcement.
This is fixed by first dequeuing from the C-queue path if it is
non-empty. Once the C-queue is empty, packets are dequeued directly from
the L-queue. Return values from qdisc_dequeue_internal() are checked for
both queues. When dequeuing from the L-queue, the parent qdisc qlen and
backlog counters are updated explicitly to keep overall qdisc statistics
consistent.
Fixes: 320d031ad6 ("sched: Struct definition and parsing of dualpi2 qdisc")
Reported-by: "Kito Xu (veritas501)" <hxzene@gmail.com>
Closes: https://lore.kernel.org/netdev/20260413075740.2234828-1-hxzene@gmail.com/
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Link: https://patch.msgid.link/20260417152551.71648-1-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that all in-tree ops-locked drivers have been converted to
ndo_set_rx_mode_async, add a warning in register_netdevice to catch
any remaining or newly added drivers that use ndo_set_rx_mode with
ops locking. This ensures future driver authors are guided toward
the async path.
Also route ops-locked devices through netdev_rx_mode_work even if they
lack rx_mode NDOs, to ensure netdev_ops_assert_locked() does not fire
on the legacy path where only RTNL is held.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-14-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Move unicast promiscuity tracking into netdev_rx_mode_work so it runs
under netdev_ops_lock instead of under the addr_lock spinlock. This
is required because __dev_set_promiscuity calls dev_change_rx_flags
and __dev_notify_flags, both of which may need to sleep.
Change ASSERT_RTNL() to netdev_ops_assert_locked() in
__dev_set_promiscuity, netif_set_allmulti and __dev_change_flags
since these are now called from the work queue under the ops lock.
Link: https://lore.kernel.org/netdev/20260214033859.43857-1-jiayuan.chen@linux.dev/
Fixes: 78cd408356 ("net: add missing instance lock to dev_set_promiscuity")
Reported-by: syzbot+2b3391f44313b3983e91@syzkaller.appspotmail.com
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-5-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a per-device netdev_hw_addr_list cache (rx_mode_addr_cache) that
allows __hw_addr_list_snapshot() and __hw_addr_list_reconcile() to
reuse previously allocated entries instead of hitting GFP_ATOMIC on
every snapshot cycle.
snapshot pops entries from the cache when available, falling back to
__hw_addr_create(). reconcile splices both snapshot lists back into
the cache via __hw_addr_splice(). The cache is flushed in
free_netdev().
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-4-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add ndo_set_rx_mode_async callback that drivers can implement instead
of the legacy ndo_set_rx_mode. The legacy callback runs under the
netif_addr_lock spinlock with BHs disabled, preventing drivers from
sleeping. The async variant runs from a work queue with rtnl_lock and
netdev_lock_ops held, in fully sleepable context.
When __dev_set_rx_mode() sees ndo_set_rx_mode_async, it schedules
netdev_rx_mode_work instead of calling the driver inline. The work
function takes two snapshots of each address list (uc/mc) under
the addr_lock, then drops the lock and calls the driver with the
work copies. After the driver returns, it reconciles the snapshots
back to the real lists under the lock.
Add netif_rx_mode_sync() to opportunistically execute the pending
workqueue update inline, so that rx mode changes are committed
before returning to userspace:
- dev_change_flags (SIOCSIFFLAGS / RTM_NEWLINK)
- dev_set_promiscuity
- dev_set_allmulti
- dev_ifsioc SIOCADDMULTI / SIOCDELMULTI
- do_setlink (RTM_SETLINK)
Note that some deep hierarchies still do skip the lower updates via:
- dev_uc_sync
- dev_mc_sync
If we do end up hitting user-visible issues, we can add more calls to
netif_rx_mode_sync in specific places. But hopefully we should not,
the actual user-visible lists are still synced, it's that just HW state
that might be lagging.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-3-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce __hw_addr_list_snapshot() and __hw_addr_list_reconcile()
for use by the upcoming ndo_set_rx_mode_async callback.
The async rx_mode path needs to snapshot the device's unicast and
multicast address lists under the addr_lock, hand those snapshots
to the driver (which may sleep), and then propagate any sync_cnt
changes back to the real lists. Two identical snapshots are taken:
a work copy for the driver to pass to __hw_addr_sync_dev() and a
reference copy to compute deltas against.
__hw_addr_list_reconcile() walks the reference snapshot comparing
each entry against the work snapshot to determine what the driver
synced or unsynced. It then applies those deltas to the real list,
handling concurrent modifications:
- If the real entry was concurrently removed but the driver synced
it to hardware (delta > 0), re-insert a stale entry so the next
work run properly unsyncs it from hardware.
- If the entry still exists, apply the delta normally. An entry
whose refcount drops to zero is removed.
# dev_addr_test_snapshot_benchmark: 1024 addrs x 1000 snapshots: 89872802 ns total, 89872 ns/iter
# dev_addr_test_snapshot_benchmark.speed: slow
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-2-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Restore the flag that indicates that the hook is going away, ie.
NFT_HOOK_REMOVE, but add a new transaction object to track deletion
of hooks without altering the basechain/flowtable hook_list during
the preparation phase.
The existing approach that moves the hook from the basechain/flowtable
hook_list to transaction hook_list breaks netlink dump path readers
of this RCU-protected list.
It should be possible use an array for nft_trans_hook to store the
deleted hooks to compact the representation but I am not expecting
many hook object, specially now that wildcard support for devices
is in place.
Note that the nft_trans_chain_hooks() list contains a list of struct
nft_trans_hook objects for DELCHAIN and DELFLOWTABLE commands, while
this list stores struct nft_hook objects for NEWCHAIN and NEWFLOWTABLE.
Note that new commands can be updated to use nft_trans_hook for
consistency.
This patch also adapts the event notification path to deal with the list
of hook transactions.
Fixes: 7d937b1071 ("netfilter: nf_tables: support for deleting devices in an existing netdev chain")
Fixes: b6d9014a33 ("netfilter: nf_tables: delete flowtable hooks via transaction list")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Publish new hooks in the list into the basechain/flowtable using
splice_list_rcu() to ensure netlink dump list traversal via rcu is safe
while concurrent ruleset update is going on.
Fixes: 78d9f48f7f ("netfilter: nf_tables: add devices to existing flowtable")
Fixes: b9703ed44f ("netfilter: nf_tables: support for adding new devices to an existing netdev chain")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nft_netdev_unregister_hooks and __nft_unregister_flowtable_net_hooks need
to use list_del_rcu(), this list can be walked by concurrent dumpers.
Add a new helper and use it consistently.
Fixes: f9a43007d3 ("netfilter: nf_tables: double hook unregistration in netns path")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Weiming Shi says:
"arp_packet_match() unconditionally parses the ARP payload assuming two
hardware addresses are present (source and target). However,
IPv4-over-IEEE1394 ARP (RFC 2734) omits the target hardware address
field, and arp_hdr_len() already accounts for this by returning a
shorter length for ARPHRD_IEEE1394 devices.
As a result, on IEEE1394 interfaces arp_packet_match() advances past a
nonexistent target hardware address and reads the wrong bytes for both
the target device address comparison and the target IP address. This
causes arptables rules to match against garbage data, leading to
incorrect filtering decisions: packets that should be accepted may be
dropped and vice versa.
The ARP stack in net/ipv4/arp.c (arp_create and arp_process) already
handles this correctly by skipping the target hardware address for
ARPHRD_IEEE1394. Apply the same pattern to arp_packet_match()."
Mangle the original patch to always return 0 (no match) in case user
matches on the target hardware address which is never present in
IEEE1394.
Note that this returns 0 (no match) for either normal and inverse match
because matching in the target hardware address in ARPHRD_IEEE1394 has
never been supported by arptables. This is intentional, matching on the
target hardware address should never evaluate true for ARPHRD_IEEE1394.
Moreover, adjust arpt_mangle to drop the packet too as AI suggests:
In arpt_mangle, the logic assumes a standard ARP layout. Because
IEEE1394 (FireWire) omits the target hardware address, the linear
pointer arithmetic miscalculates the offset for the target IP address.
This causes mangling operations to write to the wrong location, leading
to packet corruption. To ensure safety, this patch drops packets
(NF_DROP) when mangling is requested for these fields on IEEE1394
devices, as the current implementation cannot correctly map the FireWire
ARP payload.
This omits both mangling target hardware and IP address. Even if IP
address mangling should be possible in IEEE1394, this would require
to adjust arpt_mangle offset calculation, which has never been
supported.
Based on patch from Weiming Shi <bestswngs@gmail.com>.
Fixes: 6752c8db8e ("firewire net, ipv4 arp: Extend hardware address and remove driver-level packet inspection.")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The nf_osf_ttl() function accessed skb->dev to perform a local interface
address lookup without verifying that the device pointer was valid.
Additionally, the implementation utilized an in_dev_for_each_ifa_rcu
loop to match the packet source address against local interface
addresses. It assumed that packets from the same subnet should not see a
decrement on the initial TTL. A packet might appear it is from the same
subnet but it actually isn't especially in modern environments with
containers and virtual switching.
Remove the device dereference and interface loop. Replace the logic with
a switch statement that evaluates the TTL according to the ttl_check.
Fixes: 11eeef41d5 ("netfilter: passive OS fingerprint xtables match")
Reported-by: Kito Xu (veritas501) <hxzene@gmail.com>
Closes: https://lore.kernel.org/netfilter-devel/20260414074556.2512750-1-hxzene@gmail.com/
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In nf_osf_match(), the nf_osf_hdr_ctx structure is initialized once
and passed by reference to nf_osf_match_one() for each fingerprint
checked. During TCP option parsing, nf_osf_match_one() advances the
shared ctx->optp pointer.
If a fingerprint perfectly matches, the function returns early without
restoring ctx->optp to its initial state. If the user has configured
NF_OSF_LOGLEVEL_ALL, the loop continues to the next fingerprint.
However, because ctx->optp was not restored, the next call to
nf_osf_match_one() starts parsing from the end of the options buffer.
This causes subsequent matches to read garbage data and fail
immediately, making it impossible to log more than one match or logging
incorrect matches.
Instead of using a shared ctx->optp pointer, pass the context as a
constant pointer and use a local pointer (optp) for TCP option
traversal. This makes nf_osf_match_one() strictly stateless from the
caller's perspective, ensuring every fingerprint check starts at the
correct option offset.
Fixes: 1a6a0951fc ("netfilter: nfnetlink_osf: add missing fmatch check")
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently, IPVS skips MTU checks for GSO packets by excluding them with
the !skb_is_gso(skb) condition. This creates problems when IPVS tunnel
mode encapsulates GSO packets with IPIP headers.
The issue manifests in two ways:
1. MTU violation after encapsulation:
When a GSO packet passes through IPVS tunnel mode, the original MTU
check is bypassed. After adding the IPIP tunnel header, the packet
size may exceed the outgoing interface MTU, leading to unexpected
fragmentation at the IP layer.
2. Fragmentation with problematic IP IDs:
When net.ipv4.vs.pmtu_disc=1 and a GSO packet with multiple segments
is fragmented after encapsulation, each segment gets a sequentially
incremented IP ID (0, 1, 2, ...). This happens because:
a) The GSO packet bypasses MTU check and gets encapsulated
b) At __ip_finish_output, the oversized GSO packet is split into
separate SKBs (one per segment), with IP IDs incrementing
c) Each SKB is then fragmented again based on the actual MTU
This sequential IP ID allocation differs from the expected behavior
and can cause issues with fragment reassembly and packet tracking.
Fix this by properly validating GSO packets using
skb_gso_validate_network_len(). This function correctly validates
whether the GSO segments will fit within the MTU after segmentation. If
validation fails, send an ICMP Fragmentation Needed message to enable
proper PMTU discovery.
Fixes: 4cdd34084d ("netfilter: nf_conntrack_ipv6: improve fragmentation handling")
Signed-off-by: Yingnan Zhang <342144303@qq.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal says:
"Historically this is not an issue, even for normal base hooks: the data
path doesn't use the original nf_hook_ops that are used to register the
callbacks.
However, in v5.14 I added the ability to dump the active netfilter
hooks from userspace.
This code will peek back into the nf_hook_ops that are available
at the tail of the pointer-array blob used by the datapath.
The nat hooks are special, because they are called indirectly from
the central nat dispatcher hook. They are currently invisible to
the nfnl hook dump subsystem though.
But once that changes the nat ops structures have to be deferred too."
Update nf_nat_register_fn() to deal with partial exposition of the hooks
from error path which can be also an issue for nfnetlink_hook.
Fixes: e2cf17d377 ("netfilter: add new hook nfnl subsystem")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This is a partial revert of:
commit ab4f21e6fb ("netfilter: xtables: use NFPROTO_UNSPEC in more extensions")
to allow ipv4 and ipv6 only.
- xt_mac
- xt_owner
- xt_physdev
These extensions are not used by ebtables in userspace.
Moreover, xt_realm is only for ipv4, since dst->tclassid is ipv4
specific.
Fixes: ab4f21e6fb ("netfilter: xtables: use NFPROTO_UNSPEC in more extensions")
Reported-by: "Kito Xu (veritas501)" <hxzene@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Replace it with scnprintf, the buffer sizes are expected to be large enough
to hold the result, no need for snprintf+overflow check.
Increase buffer size in mangle_content_len() while at it.
BUG: KASAN: stack-out-of-bounds in vsnprintf+0xea5/0x1270
Write of size 1 at addr [..]
vsnprintf+0xea5/0x1270
sprintf+0xb1/0xe0
mangle_content_len+0x1ac/0x280
nf_nat_sdp_session+0x1cc/0x240
process_sdp+0x8f8/0xb80
process_invite_request+0x108/0x2b0
process_sip_msg+0x5da/0xf50
sip_help_tcp+0x45e/0x780
nf_confirm+0x34d/0x990
[..]
Fixes: 9fafcd7b20 ("[NETFILTER]: nf_conntrack/nf_nat: add SIP helper port")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nf_osf_match_one() computes ctx->window % f->wss.val in the
OSF_WSS_MODULO branch with no guard for f->wss.val == 0. A
CAP_NET_ADMIN user can add such a fingerprint via nfnetlink; a
subsequent matching TCP SYN divides by zero and panics the kernel.
Reject the bogus fingerprint in nfnl_osf_add_callback() above the
per-option for-loop. f->wss is per-fingerprint, not per-option, so
the check must run regardless of f->opt_num (including 0). Also
reject wss.wc >= OSF_WSS_MAX; nf_osf_match_one() already treats that
as "should not happen".
Crash:
Oops: divide error: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98)
Call Trace:
<IRQ>
nf_osf_match (net/netfilter/nfnetlink_osf.c:220)
xt_osf_match_packet (net/netfilter/xt_osf.c:32)
ipt_do_table (net/ipv4/netfilter/ip_tables.c:348)
nf_hook_slow (net/netfilter/core.c:622)
ip_local_deliver (net/ipv4/ip_input.c:265)
ip_rcv (include/linux/skbuff.h:1162)
__netif_receive_skb_one_core (net/core/dev.c:6181)
process_backlog (net/core/dev.c:6642)
__napi_poll (net/core/dev.c:7710)
net_rx_action (net/core/dev.c:7945)
handle_softirqs (kernel/softirq.c:622)
Fixes: 11eeef41d5 ("netfilter: passive OS fingerprint xtables match")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Suggested-by: Florian Westphal <fw@strlen.de>
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This expression only supports for ipv4, restrict it.
Fixes: b96af92d6e ("netfilter: nf_tables: implement Passive OS fingerprint module in nft_osf")
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
From the MCTP Base specification (DSP0236 v1.2.1), the first byte of
the MCTP header contains a 4 bit reserved field, and 4 bit version.
On our current receive path, we require those 4 reserved bits to be
zero, but the 9500-8i card is non-conformant, and may set these
reserved bits.
DSP0236 states that the reserved bits must be written as zero, and
ignored when read. While the device might not conform to the former,
we should accept these message to conform to the latter.
Relax our check on the MCTP version byte to allow non-zero bits in the
reserved field.
Fixes: 889b7da23a ("mctp: Add initial routing framework")
Signed-off-by: Yuan Zhaoming <yuanzm2@lenovo.com>
Cc: stable@vger.kernel.org
Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20260417141340.5306-1-yuanzhaoming901030@126.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit f0c5827d07 unluckily causes a regression for the FIN packet,
and the final read syscall gets an error rather than 0.
Ideally, we would want to fix hvs_channel_readable_payload() so that it
could return 0 in the FIN scenario, but it's not good for the hv_sock
driver to use the VMBus ringbuffer's cached priv_read_index, which is
internal data in the VMBus driver.
Fix the regression in hv_sock by returning 0 rather than -EIO.
Fixes: f0c5827d07 ("hv_sock: Return the readable bytes in hvs_stream_has_data()")
Cc: stable@vger.kernel.org
Reported-by: Ben Hillis <Ben.Hillis@microsoft.com>
Reported-by: Mitchell Levy <levymitchell0@gmail.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260416191433.840637-1-decui@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The vport netlink reply helpers allocate a fixed-size skb with
nlmsg_new(NLMSG_DEFAULT_SIZE, ...) but serialize the full upcall PID
array via ovs_vport_get_upcall_portids(). Since
ovs_vport_set_upcall_portids() accepts any non-zero multiple of
sizeof(u32) with no upper bound, a CAP_NET_ADMIN user can install a PID
array large enough to overflow the reply buffer, causing nla_put() to
fail with -EMSGSIZE and hitting BUG_ON(err < 0). On systems with
unprivileged user namespaces enabled (e.g., Ubuntu default), this is
reachable via unshare -Urn since OVS vport mutation operations use
GENL_UNS_ADMIN_PERM.
kernel BUG at net/openvswitch/datapath.c:2414!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 1 UID: 0 PID: 65 Comm: poc Not tainted 7.0.0-rc7-00195-geb216e422044 #1
RIP: 0010:ovs_vport_cmd_set+0x34c/0x400
Call Trace:
<TASK>
genl_family_rcv_msg_doit (net/netlink/genetlink.c:1116)
genl_rcv_msg (net/netlink/genetlink.c:1194)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
genl_rcv (net/netlink/genetlink.c:1219)
netlink_unicast (net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sys_sendto (net/socket.c:2206)
__x64_sys_sendto (net/socket.c:2209)
do_syscall_64 (arch/x86/entry/syscall_64.c:63)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
Kernel panic - not syncing: Fatal exception
Reject attempts to set more PIDs than nr_cpu_ids in
ovs_vport_set_upcall_portids(), and pre-compute the worst-case reply
size in ovs_vport_cmd_msg_size() based on that bound, similar to the
existing ovs_dp_cmd_msg_size(). nr_cpu_ids matches the cap already
used by the per-CPU dispatch configuration on the datapath side
(ovs_dp_cmd_fill_info() serialises at most nr_cpu_ids PIDs), so the
two sides stay consistent.
Fixes: 5cd667b0a4 ("openvswitch: Allow each vport to have an array of 'port_id's.")
Reported-by: Xiang Mei <xmei5@asu.edu>
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20260416024653.153456-2-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RFC 2516 Section 7 states that Protocol Field Compression (PFC) is NOT
RECOMMENDED for PPPoE. In practice, pppd does not support negotiating
PFC for PPPoE sessions, and the flow dissector driver has assumed an
uncompressed frame until the blamed commit.
During the review process of that commit [1], support for PFC is
suggested. However, having a compressed (1-byte) protocol field means
the subsequent PPP payload is shifted by one byte, causing 4-byte
misalignment for the network header and an unaligned access exception
on some architectures.
The exception can be reproduced by sending a PPPoE PFC frame to an
ethernet interface of a MIPS board, with RPS enabled, even if no PPPoE
session is active on that interface:
$ 0 : 00000000 80c40000 00000000 85144817
$ 4 : 00000008 00000100 80a75758 81dc9bb8
$ 8 : 00000010 8087ae2c 0000003d 00000000
$12 : 000000e0 00000039 00000000 00000000
$16 : 85043240 80a75758 81dc9bb8 00006488
$20 : 0000002f 00000007 85144810 80a70000
$24 : 81d1bda0 00000000
$28 : 81dc8000 81dc9aa8 00000000 805ead08
Hi : 00009d51
Lo : 2163358a
epc : 805e91f0 __skb_flow_dissect+0x1b0/0x1b50
ra : 805ead08 __skb_get_hash_net+0x74/0x12c
Status: 11000403 KERNEL EXL IE
Cause : 40800010 (ExcCode 04)
BadVA : 85144817
PrId : 0001992f (MIPS 1004Kc)
Call Trace:
[<805e91f0>] __skb_flow_dissect+0x1b0/0x1b50
[<805ead08>] __skb_get_hash_net+0x74/0x12c
[<805ef330>] get_rps_cpu+0x1b8/0x3fc
[<805fca70>] netif_receive_skb_list_internal+0x324/0x364
[<805fd120>] napi_complete_done+0x68/0x2a4
[<8058de5c>] mtk_napi_rx+0x228/0xfec
[<805fd398>] __napi_poll+0x3c/0x1c4
[<805fd754>] napi_threaded_poll_loop+0x234/0x29c
[<805fd848>] napi_threaded_poll+0x8c/0xb0
[<80053544>] kthread+0x104/0x12c
[<80002bd8>] ret_from_kernel_thread+0x14/0x1c
Code: 02d51821 1060045b 00000000 <8c640000> 3084000f 2c820005 144001a2 00042080 8e220000
To reduce the attack surface and maintain performance, do not process
PPPoE PFC frames.
[1] https://lore.kernel.org/r/20220630231016.GA392@debian.home
Fixes: 46126db9c8 ("flow_dissector: Add PPPoE dissectors")
Signed-off-by: Qingfang Deng <qingfang.deng@linux.dev>
Link: https://patch.msgid.link/20260415022456.141758-1-qingfang.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Benjamin Coddington contributed filehandle signing to defend against
filehandle-guessing attacks. The server now appends a SipHash-2-4
MAC to each filehandle when the new "sign_fh" export option is
enabled. NFSD then verifies filehandles received from clients
against the expected MAC; mismatches return NFS error STALE.
Chuck Lever converted the entire NLMv4 server-side XDR layer from
hand-written C to xdrgen-generated code, spanning roughly thirty
patches. XDR functions are generally boilerplate code and are easy
to get wrong. The goals of this conversion are improved memory
safety, lower maintenance burden, and groundwork for eventual Rust
code generation for these functions.
Dai Ngo improved pNFS block/SCSI layout robustness with two related
changes. SCSI persistent reservation fencing is now tracked per
client and per device via an xarray, to avoid both redundant preempt
operations on devices already fenced and a potential NFSD deadlock
when all nfsd threads are waiting for a layout return.
The remaining patches deliver scalability and infrastructure
improvements. Sincere thanks to all contributors, reviewers,
testers, and bug reporters who participated in the v7.1 NFSD
development cycle.
-----BEGIN PGP SIGNATURE-----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=iFl6
-----END PGP SIGNATURE-----
Merge tag 'nfsd-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
- filehandle signing to defend against filehandle-guessing attacks
(Benjamin Coddington)
The server now appends a SipHash-2-4 MAC to each filehandle when
the new "sign_fh" export option is enabled. NFSD then verifies
filehandles received from clients against the expected MAC;
mismatches return NFS error STALE
- convert the entire NLMv4 server-side XDR layer from hand-written C to
xdrgen-generated code, spanning roughly thirty patches (Chuck Lever)
XDR functions are generally boilerplate code and are easy to get
wrong. The goals of this conversion are improved memory safety, lower
maintenance burden, and groundwork for eventual Rust code generation
for these functions.
- improve pNFS block/SCSI layout robustness with two related changes
(Dai Ngo)
SCSI persistent reservation fencing is now tracked per client and
per device via an xarray, to avoid both redundant preempt operations
on devices already fenced and a potential NFSD deadlock when all nfsd
threads are waiting for a layout return.
- scalability and infrastructure improvements
Sincere thanks to all contributors, reviewers, testers, and bug
reporters who participated in the v7.1 NFSD development cycle.
* tag 'nfsd-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (83 commits)
NFSD: Docs: clean up pnfs server timeout docs
nfsd: fix comment typo in nfsxdr
nfsd: fix comment typo in nfs3xdr
NFSD: convert callback RPC program to per-net namespace
NFSD: use per-operation statidx for callback procedures
svcrdma: Use contiguous pages for RDMA Read sink buffers
SUNRPC: Add svc_rqst_page_release() helper
SUNRPC: xdr.h: fix all kernel-doc warnings
svcrdma: Factor out WR chain linking into helper
svcrdma: Add Write chunk WRs to the RPC's Send WR chain
svcrdma: Clean up use of rdma->sc_pd->device
svcrdma: Clean up use of rdma->sc_pd->device in Receive paths
svcrdma: Add fair queuing for Send Queue access
SUNRPC: Optimize rq_respages allocation in svc_alloc_arg
SUNRPC: Track consumed rq_pages entries
svcrdma: preserve rq_next_page in svc_rdma_save_io_pages
SUNRPC: Handle NULL entries in svc_rqst_release_pages
SUNRPC: Allocate a separate Reply page array
SUNRPC: Tighten bounds checking in svc_rqst_replace_page
NFSD: Sign filehandles
...
AH allocates its temporary auth/ICV layout differently when ESN is enabled:
the async ahash setup appends a 4-byte seqhi slot before the ICV or
auth_data area, but the async completion callbacks still reconstruct the
temporary layout as if seqhi were absent.
With an async AH implementation selected, that makes AH copy or compare
the wrong bytes on both the IPv4 and IPv6 paths. In UML repro on IPv4 AH
with ESN and forced async hmac(sha1), ping fails with 100% packet loss,
and the callback logs show the pre-fix drift:
ah4 output_done: esn=1 err=0 icv_off=20 expected_off=24
ah4 input_done: esn=1 auth_off=20 expected_auth_off=24 icv_off=32 expected_icv_off=36
Reconstruct the callback-side layout the same way the setup path built it
by skipping the ESN seqhi slot before locating the saved auth_data or ICV.
Per RFC 4302, the ESN high-order 32 bits participate in the AH ICV
computation, so the async callbacks must account for the seqhi slot.
Post-fix, the same IPv4 AH+ESN+forced-async-hmac(sha1) UML repro shows
the corrected offset (ah4 output_done: esn=1 err=0 icv_off=24
expected_off=24) and ping succeeds; net/ipv4/ah4.o and net/ipv6/ah6.o
build clean at W=1. IPv6 AH+ESN was not exercised at runtime, and the
change has not been tested against a real async hardware AH engine.
Fixes: d4d573d033 ("{IPv4,xfrm} Add ESN support for AH egress part")
Fixes: d8b2a8600b ("{IPv4,xfrm} Add ESN support for AH ingress part")
Fixes: 26dd70c3fa ("{IPv6,xfrm} Add ESN support for AH egress part")
Fixes: 8d6da6f325 ("{IPv6,xfrm} Add ESN support for AH ingress part")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5-4
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
sctp_getsockopt_peer_auth_chunks() checks that the caller's optval
buffer is large enough for the peer AUTH chunk list with
if (len < num_chunks)
return -EINVAL;
but then writes num_chunks bytes to p->gauth_chunks, which lives
at offset offsetof(struct sctp_authchunks, gauth_chunks) == 8
inside optval. The check is missing the sizeof(struct
sctp_authchunks) = 8-byte header. When the caller supplies
len == num_chunks (for any num_chunks > 0) the test passes but
copy_to_user() writes sizeof(struct sctp_authchunks) = 8 bytes
past the declared buffer.
The sibling function sctp_getsockopt_local_auth_chunks() at the
next line already has the correct check:
if (len < sizeof(struct sctp_authchunks) + num_chunks)
return -EINVAL;
Align the peer variant with its sibling.
Reproducer confirms on v7.0-13-generic: an unprivileged userspace
caller that opens a loopback SCTP association with AUTH enabled,
queries num_chunks with a short optval, then issues the real
getsockopt with len == num_chunks and sentinel bytes painted past
the buffer observes those sentinel bytes overwritten with the
peer's AUTH chunk type. The bytes written are under the peer's
control but land in the caller's own userspace; this is not a
kernel memory corruption, but it is a kernel-side contract
violation that can silently corrupt adjacent userspace data.
Fixes: 65b07e5d0d ("[SCTP]: API updates to suport SCTP-AUTH extensions.")
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20260416031903.1447072-1-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SOCKMAP can hide inflight fd from AF_UNIX GC.
When a socket in SOCKMAP receives skb with inflight fd,
sk_psock_verdict_data_ready() looks up the mapped socket and
enqueue skb to its psock->ingress_skb.
Since neither the old nor the new GC can inspect the psock
queue, the hidden skb leaks the inflight sockets. Note that
this cannot be detected via kmemleak because inflight sockets
are linked to a global list.
In addition, SOCKMAP redirect breaks the Tarjan-based GC's
assumption that unix_edge.successor is always alive, which
is no longer true once skb is redirected, resulting in
use-after-free below. [0]
Moreover, SOCKMAP does not call scm_stat_del() properly,
so unix_show_fdinfo() could report an incorrect fd count.
sk_msg_recvmsg() does not support any SCM attributes in the
first place.
Let's drop all SCM attributes before passing skb to the
SOCKMAP layer.
[0]:
BUG: KASAN: slab-use-after-free in unix_del_edges (net/unix/garbage.c:118 net/unix/garbage.c:181 net/unix/garbage.c:251)
Read of size 8 at addr ffff888125362670 by task kworker/56:1/496
CPU: 56 UID: 0 PID: 496 Comm: kworker/56:1 Not tainted 7.0.0-rc7-00263-gb9d8b856689d #3 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
Workqueue: events sk_psock_backlog
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:122)
print_report (mm/kasan/report.c:379)
kasan_report (mm/kasan/report.c:597)
unix_del_edges (net/unix/garbage.c:118 net/unix/garbage.c:181 net/unix/garbage.c:251)
unix_destroy_fpl (net/unix/garbage.c:317)
unix_destruct_scm (./include/net/scm.h:80 ./include/net/scm.h:86 net/unix/af_unix.c:1976)
sk_psock_backlog (./include/linux/skbuff.h:?)
process_scheduled_works (kernel/workqueue.c:?)
worker_thread (kernel/workqueue.c:?)
kthread (kernel/kthread.c:438)
ret_from_fork (arch/x86/kernel/process.c:164)
ret_from_fork_asm (arch/x86/entry/entry_64.S:258)
</TASK>
Allocated by task 955:
kasan_save_track (mm/kasan/common.c:58 mm/kasan/common.c:78)
__kasan_slab_alloc (mm/kasan/common.c:369)
kmem_cache_alloc_noprof (mm/slub.c:4539)
sk_prot_alloc (net/core/sock.c:2240)
sk_alloc (net/core/sock.c:2301)
unix_create1 (net/unix/af_unix.c:1099)
unix_create (net/unix/af_unix.c:1169)
__sock_create (net/socket.c:1606)
__sys_socketpair (net/socket.c:1811)
__x64_sys_socketpair (net/socket.c:1863 net/socket.c:1860 net/socket.c:1860)
do_syscall_64 (arch/x86/entry/syscall_64.c:?)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Freed by task 496:
kasan_save_track (mm/kasan/common.c:58 mm/kasan/common.c:78)
kasan_save_free_info (mm/kasan/generic.c:587)
__kasan_slab_free (mm/kasan/common.c:287)
kmem_cache_free (mm/slub.c:6165)
__sk_destruct (net/core/sock.c:2282 net/core/sock.c:2384)
sk_psock_destroy (./include/net/sock.h:?)
process_scheduled_works (kernel/workqueue.c:?)
worker_thread (kernel/workqueue.c:?)
kthread (kernel/kthread.c:438)
ret_from_fork (arch/x86/kernel/process.c:164)
ret_from_fork_asm (arch/x86/entry/entry_64.S:258)
Fixes: c63829182c ("af_unix: Implement ->psock_update_sk_prot()")
Fixes: 77462de14a ("af_unix: Add read_sock for stream socket types")
Reported-by: Xingyu Jin <xingyuj@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260415184830.3988432-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Caching saddr and daddr before pskb_pull() is problematic
since skb->head can change.
Remove these temporary variables:
- We only access &ipv6_hdr(skb)->saddr and &ipv6_hdr(skb)->daddr
when net_dbg_ratelimited() is called in the slow path.
- Avoid potential future misuse after pskb_pull() call.
Fixes: 4b3418fba0 ("ipv6: icmp: include addresses in debug messages")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260416103505.2380753-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_get_timestamping_opt_stats() intentionally runs lockless, we must
add READ_ONCE() and WRITE_ONCE() annotations to keep KCSAN happy.
Fixes: 29c1c44646 ("tcp: add u32 counter in tcp_sock and an SNMP counter for PLB")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260416200319.3608680-15-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_get_timestamping_opt_stats() intentionally runs lockless, we must
add READ_ONCE() annotations to keep KCSAN happy.
WRITE_ONCE() annotations are already present.
Fixes: e08ab0b377 ("tcp: add bytes not sent to SCM_TIMESTAMPING_OPT_STATS")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260416200319.3608680-14-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_get_timestamping_opt_stats() intentionally runs lockless, we must
add READ_ONCE() and WRITE_ONCE() annotations to keep KCSAN happy.
Fixes: 32efcc06d2 ("tcp: export count for rehash attempts")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260416200319.3608680-13-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_get_timestamping_opt_stats() intentionally runs lockless, we must
add READ_ONCE() and WRITE_ONCE() annotations to keep KCSAN happy.
Fixes: e8bd8fca67 ("tcp: add SRTT to SCM_TIMESTAMPING_OPT_STATS")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260416200319.3608680-12-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_get_timestamping_opt_stats() intentionally runs lockless, we must
add READ_ONCE() and WRITE_ONCE() annotations to keep KCSAN happy.
Fixes: 7ec65372ca ("tcp: add stat of data packet reordering events")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260416200319.3608680-11-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_get_timestamping_opt_stats() intentionally runs lockless, we must
add READ_ONCE() and WRITE_ONCE() annotations to keep KCSAN happy.
Fixes: 7e10b6554f ("tcp: add dsack blocks received stats")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260416200319.3608680-10-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_get_timestamping_opt_stats() intentionally runs lockless, we must
add READ_ONCE() and WRITE_ONCE() annotations to keep KCSAN happy.
Fixes: fb31c9b9f6 ("tcp: add data bytes retransmitted stats")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260416200319.3608680-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_get_timestamping_opt_stats() intentionally runs lockless, we must
add READ_ONCE() and WRITE_ONCE() annotations to keep KCSAN happy.
Fixes: ba113c3aa7 ("tcp: add data bytes sent stats")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260416200319.3608680-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_get_timestamping_opt_stats() intentionally runs lockless, we must
add READ_ONCE() and WRITE_ONCE() annotations to keep KCSAN happy.
Fixes: 87ecc95d81 ("tcp: add send queue size stat in SCM_TIMESTAMPING_OPT_STATS")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260416200319.3608680-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_get_timestamping_opt_stats() intentionally runs lockless, we must
add READ_ONCE() and WRITE_ONCE() annotations to keep KCSAN happy.
Fixes: 7156d194a0 ("tcp: add snd_ssthresh stat in SCM_TIMESTAMPING_OPT_STATS")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260416200319.3608680-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_get_timestamping_opt_stats() intentionally runs lockless, we must
add READ_ONCE(), WRITE_ONCE() data_race() annotations to keep KCSAN happy.
Fixes: bb7c19f960 ("tcp: add related fields into SCM_TIMESTAMPING_OPT_STATS")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260416200319.3608680-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_get_timestamping_opt_stats() intentionally runs lockless, we must
add READ_ONCE() and WRITE_ONCE() annotations to keep KCSAN happy.
Fixes: 7e98102f48 ("tcp: record pkts sent and retransmistted")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260416200319.3608680-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_get_timestamping_opt_stats() does not own the socket lock,
this is intentional.
It calls tcp_get_info_chrono_stats() while other threads could
change chrono fields in tcp_chrono_set().
I do not think we need coherent TCP socket state snapshot
in tcp_get_timestamping_opt_stats(), I chose to only
add annotations to keep KCSAN happy.
Fixes: 1c885808e4 ("tcp: SOF_TIMESTAMPING_OPT_STATS option for SO_TIMESTAMPING")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260416200319.3608680-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=79I2
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
"Most of the diff stat comes from Xu Kuohai's fix to emit ENDBR/BTI,
since all JITs had to be touched to move constant blinding out and
pass bpf_verifier_env in.
- Fix use-after-free in arena_vm_close on fork (Alexei Starovoitov)
- Dissociate struct_ops program with map if map_update fails (Amery
Hung)
- Fix out-of-range and off-by-one bugs in arm64 JIT (Daniel Borkmann)
- Fix precedence bug in convert_bpf_ld_abs alignment check (Daniel
Borkmann)
- Fix arg tracking for imprecise/multi-offset in BPF_ST/STX insns
(Eduard Zingerman)
- Copy token from main to subprogs to fix missing kallsyms (Eduard
Zingerman)
- Prevent double close and leak of btf objects in libbpf (Jiri Olsa)
- Fix af_unix null-ptr-deref in sockmap (Michal Luczaj)
- Fix NULL deref in map_kptr_match_type for scalar regs (Mykyta
Yatsenko)
- Avoid unnecessary IPIs. Remove redundant bpf_flush_icache() in
arm64 and riscv JITs (Puranjay Mohan)
- Fix out of bounds access. Validate node_id in arena_alloc_pages()
(Puranjay Mohan)
- Reject BPF-to-BPF calls and callbacks in arm32 JIT (Puranjay Mohan)
- Refactor all JITs to pass bpf_verifier_env to emit ENDBR/BTI for
indirect jump targets on x86-64, arm64 JITs (Xu Kuohai)
- Allow UTF-8 literals in bpf_bprintf_prepare() (Yihan Ding)"
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (32 commits)
bpf, arm32: Reject BPF-to-BPF calls and callbacks in the JIT
bpf: Dissociate struct_ops program with map if map_update fails
bpf: Validate node_id in arena_alloc_pages()
libbpf: Prevent double close and leak of btf objects
selftests/bpf: cover UTF-8 trace_printk output
bpf: allow UTF-8 literals in bpf_bprintf_prepare()
selftests/bpf: Reject scalar store into kptr slot
bpf: Fix NULL deref in map_kptr_match_type for scalar regs
bpf: Fix precedence bug in convert_bpf_ld_abs alignment check
bpf, arm64: Emit BTI for indirect jump target
bpf, x86: Emit ENDBR for indirect jump targets
bpf: Add helper to detect indirect jump targets
bpf: Pass bpf_verifier_env to JIT
bpf: Move constants blinding out of arch-specific JITs
bpf, sockmap: Take state lock for af_unix iter
bpf, sockmap: Fix af_unix null-ptr-deref in proto update
selftests/bpf: Extend bpf_iter_unix to attempt deadlocking
bpf, sockmap: Fix af_unix iter deadlock
bpf, sockmap: Annotate af_unix sock:: Sk_state data-races
selftests/bpf: verify kallsyms entries for token-loaded subprograms
...
xfrm6_rcv_encap() performs an IPv6 route lookup when the skb does not
already have a dst attached. ip6_route_input_lookup() returns a
referenced dst entry even when the lookup resolves to an error route.
If dst->error is set, xfrm6_rcv_encap() drops the skb without attaching
the dst to the skb and without releasing the reference returned by the
lookup. Repeated packets hitting this path therefore leak dst entries.
Release the dst before jumping to the drop path.
Fixes: 0146dca70b ("xfrm: add support for UDPv6 encapsulation of ESP")
Cc: stable@kernel.org
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Tested-by: Ruide Cao <caoruide123@gmail.com>
Signed-off-by: Yilin Zhu <zylzyl2333@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
`virtio_transport_stream_do_peek()` does not account for the skb offset
when computing the number of bytes to copy.
This means that, after a partial recv() that advances the offset, a peek
requesting more bytes than are available in the sk_buff causes
`skb_copy_datagram_iter()` to go past the valid payload, resulting in
a -EFAULT.
The dequeue path already handles this correctly.
Apply the same logic to the peek path.
Fixes: 0df7cd3c13 ("vsock/virtio/vhost: read data from non-linear skb")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: Luigi Leonardi <leonardi@redhat.com>
Link: https://patch.msgid.link/20260415-fix_peek-v4-1-8207e872759e@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DSA replaces the conduit (master) device's ethtool_ops with its own
wrappers that aggregate stats from both the conduit and DSA switch
ports. Taking the lock again inside the DSA wrappers causes a deadlock.
Stumbled upon this when booting qemu with fbnic and CONFIG_NET_DSA_LOOP=y
(which looks like some kind of testing device that auto-populates the ports
of eth0). `ethtool -i` is enough to deadlock. This means we have basically zero
coverage for DSA stuff with real ops locked devs.
Remove the redundant netdev_lock_ops()/netdev_unlock_ops() calls from
the DSA conduit ethtool wrappers.
Fixes: 2bcf4772e4 ("net: ethtool: try to protect all callback with netdev instance lock")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260414231035.1917035-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In advance_sched(), when should_change_schedules() returns true,
switch_schedules() is called to promote the admin schedule to oper.
switch_schedules() queues the old oper schedule for RCU freeing via
call_rcu(), but 'next' still points into an entry of the old oper
schedule. The subsequent 'next->end_time = end_time' and
rcu_assign_pointer(q->current_entry, next) are use-after-free.
Fix this by selecting 'next' from the new oper schedule immediately
after switch_schedules(), and using its pre-calculated end_time.
setup_first_end_time() sets the first entry's end_time to
base_time + interval when the schedule is installed, so the value
is already correct.
The deleted 'end_time = sched_base_time(admin)' assignment was also
harmful independently: it would overwrite the new first entry's
pre-calculated end_time with just base_time.
Fixes: a3d43c0d56 ("taprio: Add support adding an admin schedule")
Reported-by: Junxi Qian <qjx1298677004@gmail.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix an operator precedence issue in convert_bpf_ld_abs() where the
expression offset + ip_align % size evaluates as offset + (ip_align % size)
due to % having higher precedence than +. That latter evaluation does
not make any sense. The intended check is (offset + ip_align) % size == 0
to verify that the packet load offset is properly aligned for direct
access.
With NET_IP_ALIGN == 2, the bug causes the inline fast-path for direct
packet loads to almost never be taken on !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
platforms. This forces nearly all cBPF BPF_LD_ABS packet loads through
the bpf_skb_load_helper slow path on the affected archs.
Fixes: e0cea7ce98 ("bpf: implement ld_abs/ld_ind in native bpf")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260416122719.661033-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
virtio_transport_recv_listen() calls sk_acceptq_added() before
vsock_assign_transport(). If vsock_assign_transport() fails or
selects a different transport, the error path returns without
calling sk_acceptq_removed(), permanently incrementing
sk_ack_backlog.
After approximately backlog+1 such failures, sk_acceptq_is_full()
returns true, causing the listener to reject all new connections.
Fix by moving sk_acceptq_added() to after the transport validation,
matching the pattern used by vmci_transport and hyperv_transport.
Fixes: c0cfa2d8a7 ("vsock: add multi-transports support")
Signed-off-by: Dudu Lu <phx0fer@gmail.com>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260413131409.19022-1-phx0fer@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
syzbot reported a panic [1] [2].
When an IPv6 nexthop is replaced with an IPv4 nexthop, the has_v4 flag
of all groups containing this nexthop is not updated. This is because
nh_group_v4_update is only called when replacing AF_INET to AF_INET6,
but the reverse direction (AF_INET6 to AF_INET) is missed.
This allows a stale has_v4=false to bypass fib6_check_nexthop, causing
IPv6 routes to be attached to groups that effectively contain only AF_INET
members. Subsequent route lookups then call nexthop_fib6_nh() which
returns NULL for the AF_INET member, leading to a NULL pointer
dereference.
Fix by calling nh_group_v4_update whenever the family changes, not just
AF_INET to AF_INET6.
Reproducer:
# AF_INET6 blackhole
ip -6 nexthop add id 1 blackhole
# group with has_v4=false
ip nexthop add id 100 group 1
# replace with AF_INET (no -6), has_v4 stays false
ip nexthop replace id 1 blackhole
# pass stale has_v4 check
ip -6 route add 2001:db8::/64 nhid 100
# panic
ping -6 2001:db8::1
[1] https://syzkaller.appspot.com/bug?id=e17283eb2f8dcf3dd9b47fe6f67a95f71faadad0
[2] https://syzkaller.appspot.com/bug?id=8699b6ae54c9f35837d925686208402949e12ef3
Fixes: 7bf4796dd0 ("nexthops: add support for replace")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260413114522.147784-1-jiayuan.chen@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
cake_update_flowkeys() is supposed to update the flow dissector keys
with the NAT-translated addresses and ports from conntrack, so that
CAKE's per-flow fairness correctly identifies post-NAT flows as
belonging to the same connection.
For the source port, this works correctly:
keys->ports.src = port;
But for the destination port, the assignment is reversed:
port = keys->ports.dst;
This means the NAT destination port is never updated in the flow keys.
As a result, when multiple connections are NATed to the same destination,
CAKE treats them as separate flows because the original (pre-NAT)
destination ports differ. This breaks CAKE's NAT-aware flow isolation
when using the "nat" mode.
The bug was introduced in commit b0c19ed608 ("sch_cake: Take advantage
of skb->hash where appropriate") which refactored the original direct
assignment into a compare-and-conditionally-update pattern, but wrote
the destination port update backwards.
Fix by reversing the assignment direction to match the source port
pattern.
Fixes: b0c19ed608 ("sch_cake: Take advantage of skb->hash where appropriate")
Signed-off-by: Dudu Lu <phx0fer@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260413110041.44704-1-phx0fer@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Local FDB entries can be rewritten in place by `fdb_delete_local()`, which
updates `f->dst` to another port or to `NULL` while keeping the entry
alive. Several bridge RCU readers inspect `f->dst`, including
`br_fdb_fillbuf()` through the `brforward_read()` sysfs path.
These readers currently load `f->dst` multiple times and can therefore
observe inconsistent values across the check and later dereference.
In `br_fdb_fillbuf()`, this means a concurrent local-FDB update can change
`f->dst` after the NULL check and before the `port_no` dereference,
leading to a NULL-ptr-deref.
Fix this by taking a single `READ_ONCE()` snapshot of `f->dst` in each
affected RCU reader and using that snapshot for the rest of the access
sequence. Also publish the in-place `f->dst` updates in `fdb_delete_local()`
with `WRITE_ONCE()` so the readers and writer use matching access patterns.
Fixes: 960b589f86 ("bridge: Properly check if local fdb entry can be deleted in br_fdb_change_mac_address")
Cc: stable@kernel.org
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Tested-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Zhengchuan Liang <zcliangcn@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/6570fabb85ecadb8baaf019efe856f407711c7b9.1776043229.git.zcliangcn@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In tcf_blockcast_redir(), when iterating block ports to redirect
packets to multiple devices, the mac_header_xmit flag is queried
from the wrong device. The loop sends to dev_prev but queries
dev_is_mac_header_xmit(dev) — which is the NEXT device in the
iteration, not the one being sent to.
This causes tcf_mirred_to_dev() to make incorrect decisions about
whether to push or pull the MAC header. When the block contains
mixed device types (e.g., an ethernet veth and a tunnel device),
intermediate devices get the wrong mac_header_xmit flag, leading to
skb header corruption. In the worst case, skb_push_rcsum with an
incorrect mac_len can exhaust headroom and panic.
The last device in the loop is handled correctly (line 365-366 uses
dev_is_mac_header_xmit(dev_prev)), confirming this is a copy-paste
oversight for the intermediate devices.
Fix by using dev_prev instead of dev for the mac_header_xmit query,
consistent with the device actually being sent to.
Fixes: 42f39036cd ("net/sched: act_mirred: Allow mirred to block")
Signed-off-by: Dudu Lu <phx0fer@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260413084927.71353-1-phx0fer@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In xen_9pfs_front_init(), parse the backend version list as comma-separated
tokens with kstrtouint(), keep strict token validation, and explicitly
require protocol version 1 to be present.
This replaces the deprecated simple_strtoul(), improves error reporting
consistency, and avoids partially parsed values in control paths.
Signed-off-by: Yufan Chen <ericterminal@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-ID: <20260324153023.86853-3-ericterminal@gmail.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
xen_9pfs_front_alloc_dataring() tears down resources on failure but
leaves ring fields stale. If xen_9pfs_front_init() later jumps to the
common error path, xen_9pfs_front_free() may touch the same resources
again, causing duplicate/invalid gnttab_end_foreign_access() calls and
potentially dereferencing a freed intf pointer.
Initialize dataring sentinels before allocation, gate teardown on those
sentinels, and clear ref/intf/data/irq immediately after each release.
This keeps cleanup idempotent for partially initialized rings and
prevents repeated teardown during init failure handling.
Signed-off-by: Yufan Chen <ericterminal@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-ID: <20260324153023.86853-2-ericterminal@gmail.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
When a BPF iterator program updates a sockmap, there is a race condition in
unix_stream_bpf_update_proto() where the `peer` pointer can become stale[1]
during a state transition TCP_ESTABLISHED -> TCP_CLOSE.
CPU0 bpf CPU1 close
-------- ----------
// unix_stream_bpf_update_proto()
sk_pair = unix_peer(sk)
if (unlikely(!sk_pair))
return -EINVAL;
// unix_release_sock()
skpair = unix_peer(sk);
unix_peer(sk) = NULL;
sock_put(skpair)
sock_hold(sk_pair) // UaF
More practically, this fix guarantees that the iterator program is
consistently provided with a unix socket that remains stable during
iterator execution.
[1]:
BUG: KASAN: slab-use-after-free in unix_stream_bpf_update_proto+0x155/0x490
Write of size 4 at addr ffff8881178c9a00 by task test_progs/2231
Call Trace:
dump_stack_lvl+0x5d/0x80
print_report+0x170/0x4f3
kasan_report+0xe4/0x1c0
kasan_check_range+0x125/0x200
unix_stream_bpf_update_proto+0x155/0x490
sock_map_link+0x71c/0xec0
sock_map_update_common+0xbc/0x600
sock_map_update_elem+0x19a/0x1f0
bpf_prog_bbbf56096cdd4f01_selective_dump_unix+0x20c/0x217
bpf_iter_run_prog+0x21e/0xae0
bpf_iter_unix_seq_show+0x1e0/0x2a0
bpf_seq_read+0x42c/0x10d0
vfs_read+0x171/0xb20
ksys_read+0xff/0x200
do_syscall_64+0xf7/0x5e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Allocated by task 2236:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_slab_alloc+0x63/0x80
kmem_cache_alloc_noprof+0x1d5/0x680
sk_prot_alloc+0x59/0x210
sk_alloc+0x34/0x470
unix_create1+0x86/0x8a0
unix_stream_connect+0x318/0x15b0
__sys_connect+0xfd/0x130
__x64_sys_connect+0x72/0xd0
do_syscall_64+0xf7/0x5e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 2236:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x70
__kasan_slab_free+0x47/0x70
kmem_cache_free+0x11c/0x590
__sk_destruct+0x432/0x6e0
unix_release_sock+0x9b3/0xf60
unix_release+0x8a/0xf0
__sock_release+0xb0/0x270
sock_close+0x18/0x20
__fput+0x36e/0xac0
fput_close_sync+0xe5/0x1a0
__x64_sys_close+0x7d/0xd0
do_syscall_64+0xf7/0x5e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: 2c860a43dd ("bpf: af_unix: Implement BPF iterator for UNIX domain socket.")
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260414-unix-proto-update-null-ptr-deref-v4-5-2af6fe97918e@rbox.co
unix_stream_connect() sets sk_state (`WRITE_ONCE(sk->sk_state,
TCP_ESTABLISHED)`) _before_ it assigns a peer (`unix_peer(sk) = newsk`).
sk_state == TCP_ESTABLISHED makes sock_map_sk_state_allowed() believe that
socket is properly set up, which would include having a defined peer. IOW,
there's a window when unix_stream_bpf_update_proto() can be called on
socket which still has unix_peer(sk) == NULL.
CPU0 bpf CPU1 connect
-------- ------------
WRITE_ONCE(sk->sk_state, TCP_ESTABLISHED)
sock_map_sk_state_allowed(sk)
...
sk_pair = unix_peer(sk)
sock_hold(sk_pair)
sock_hold(newsk)
smp_mb__after_atomic()
unix_peer(sk) = newsk
BUG: kernel NULL pointer dereference, address: 0000000000000080
RIP: 0010:unix_stream_bpf_update_proto+0xa0/0x1b0
Call Trace:
sock_map_link+0x564/0x8b0
sock_map_update_common+0x6e/0x340
sock_map_update_elem_sys+0x17d/0x240
__sys_bpf+0x26db/0x3250
__x64_sys_bpf+0x21/0x30
do_syscall_64+0x6b/0x3a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Initial idea was to move peer assignment _before_ the sk_state update[1],
but that involved an additional memory barrier, and changing the hot path
was rejected.
Then a NULL check during proto update in unix_stream_bpf_update_proto() was
considered[2], but the follow-up discussion[3] focused on the root cause,
i.e. sockmap update taking a wrong lock. Or, more specifically, missing
unix_state_lock()[4].
In the end it was concluded that teaching sockmap about the af_unix locking
would be unnecessarily complex[5].
Complexity aside, since BPF_PROG_TYPE_SCHED_CLS and BPF_PROG_TYPE_SCHED_ACT
are allowed to update sockmaps, sock_map_update_elem() taking the unix
lock, as it is currently implemented in unix_state_lock():
spin_lock(&unix_sk(s)->lock), would be problematic. unix_state_lock() taken
in a process context, followed by a softirq-context TC BPF program
attempting to take the same spinlock -- deadlock[6].
This way we circled back to the peer check idea[2].
[1]: https://lore.kernel.org/netdev/ba5c50aa-1df4-40c2-ab33-a72022c5a32e@rbox.co/
[2]: https://lore.kernel.org/netdev/20240610174906.32921-1-kuniyu@amazon.com/
[3]: https://lore.kernel.org/netdev/7603c0e6-cd5b-452b-b710-73b64bd9de26@linux.dev/
[4]: https://lore.kernel.org/netdev/CAAVpQUA+8GL_j63CaKb8hbxoL21izD58yr1NvhOhU=j+35+3og@mail.gmail.com/
[5]: https://lore.kernel.org/bpf/CAAVpQUAHijOMext28Gi10dSLuMzGYh+jK61Ujn+fZ-wvcODR2A@mail.gmail.com/
[6]: https://lore.kernel.org/bpf/dd043c69-4d03-46fe-8325-8f97101435cf@linux.dev/
Summary of scenarios where af_unix/stream connect() may race a sockmap
update:
1. connect() vs. bpf(BPF_MAP_UPDATE_ELEM), i.e. sock_map_update_elem_sys()
Implemented NULL check is sufficient. Once assigned, socket peer won't
be released until socket fd is released. And that's not an issue because
sock_map_update_elem_sys() bumps fd refcnf.
2. connect() vs BPF program doing update
Update restricted per verifier.c:may_update_sockmap() to
BPF_PROG_TYPE_TRACING/BPF_TRACE_ITER
BPF_PROG_TYPE_SOCK_OPS (bpf_sock_map_update() only)
BPF_PROG_TYPE_SOCKET_FILTER
BPF_PROG_TYPE_SCHED_CLS
BPF_PROG_TYPE_SCHED_ACT
BPF_PROG_TYPE_XDP
BPF_PROG_TYPE_SK_REUSEPORT
BPF_PROG_TYPE_FLOW_DISSECTOR
BPF_PROG_TYPE_SK_LOOKUP
Plus one more race to consider:
CPU0 bpf CPU1 connect
-------- ------------
WRITE_ONCE(sk->sk_state, TCP_ESTABLISHED)
sock_map_sk_state_allowed(sk)
sock_hold(newsk)
smp_mb__after_atomic()
unix_peer(sk) = newsk
sk_pair = unix_peer(sk)
if (unlikely(!sk_pair))
return -EINVAL;
CPU1 close
----------
skpair = unix_peer(sk);
unix_peer(sk) = NULL;
sock_put(skpair)
// use after free?
sock_hold(sk_pair)
2.1 BPF program invoking helper function bpf_sock_map_update() ->
BPF_CALL_4(bpf_sock_map_update(), ...)
Helper limited to BPF_PROG_TYPE_SOCK_OPS. Nevertheless, a unix sock
might be accessible via bpf_map_lookup_elem(). Which implies sk
already having psock, which in turn implies sk already having
sk_pair. Since sk_psock_destroy() is queued as RCU work, sk_pair
won't go away while BPF executes the update.
2.2 BPF program invoking helper function bpf_map_update_elem() ->
sock_map_update_elem()
2.2.1 Unix sock accessible to BPF prog only via sockmap lookup in
BPF_PROG_TYPE_SOCKET_FILTER, BPF_PROG_TYPE_SCHED_CLS,
BPF_PROG_TYPE_SCHED_ACT, BPF_PROG_TYPE_XDP,
BPF_PROG_TYPE_SK_REUSEPORT, BPF_PROG_TYPE_FLOW_DISSECTOR,
BPF_PROG_TYPE_SK_LOOKUP.
Pretty much the same as case 2.1.
2.2.2 Unix sock accessible to BPF program directly:
BPF_PROG_TYPE_TRACING, narrowed down to BPF_TRACE_ITER.
Sockmap iterator (sock_map_seq_ops) is safe: unix sock
residing in a sockmap means that the sock already went through
the proto update step.
Unix sock iterator (bpf_iter_unix_seq_ops), on the other hand,
gives access to socks that may still be unconnected. Which
means iterator prog can race sockmap/proto update against
connect().
BUG: KASAN: null-ptr-deref in unix_stream_bpf_update_proto+0x253/0x4d0
Write of size 4 at addr 0000000000000080 by task test_progs/3140
Call Trace:
dump_stack_lvl+0x5d/0x80
kasan_report+0xe4/0x1c0
kasan_check_range+0x125/0x200
unix_stream_bpf_update_proto+0x253/0x4d0
sock_map_link+0x71c/0xec0
sock_map_update_common+0xbc/0x600
sock_map_update_elem+0x19a/0x1f0
bpf_prog_bbbf56096cdd4f01_selective_dump_unix+0x20c/0x217
bpf_iter_run_prog+0x21e/0xae0
bpf_iter_unix_seq_show+0x1e0/0x2a0
bpf_seq_read+0x42c/0x10d0
vfs_read+0x171/0xb20
ksys_read+0xff/0x200
do_syscall_64+0xf7/0x5e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
While the introduced NULL check prevents null-ptr-deref in the
BPF program path as well, it is insufficient to guard against
a poorly timed close() leading to a use-after-free. This will
be addressed in a subsequent patch.
Fixes: c63829182c ("af_unix: Implement ->psock_update_sk_prot()")
Closes: https://lore.kernel.org/netdev/ba5c50aa-1df4-40c2-ab33-a72022c5a32e@rbox.co/
Reported-by: Michal Luczaj <mhal@rbox.co>
Reported-by: 钱一铭 <yimingqian591@gmail.com>
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Suggested-by: Martin KaFai Lau <martin.lau@linux.dev>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260414-unix-proto-update-null-ptr-deref-v4-4-2af6fe97918e@rbox.co
bpf_iter_unix_seq_show() may deadlock when lock_sock_fast() takes the fast
path and the iter prog attempts to update a sockmap. Which ends up spinning
at sock_map_update_elem()'s bh_lock_sock():
WARNING: possible recursive locking detected
test_progs/1393 is trying to acquire lock:
ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: sock_map_update_elem+0xdb/0x1f0
but task is already holding lock:
ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: __lock_sock_fast+0x37/0xe0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(slock-AF_UNIX);
lock(slock-AF_UNIX);
*** DEADLOCK ***
May be due to missing lock nesting notation
4 locks held by test_progs/1393:
#0: ffff88814b59c790 (&p->lock){+.+.}-{4:4}, at: bpf_seq_read+0x59/0x10d0
#1: ffff88811ec25fd8 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: bpf_seq_read+0x42c/0x10d0
#2: ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: __lock_sock_fast+0x37/0xe0
#3: ffffffff85a6a7c0 (rcu_read_lock){....}-{1:3}, at: bpf_iter_run_prog+0x51d/0xb00
Call Trace:
dump_stack_lvl+0x5d/0x80
print_deadlock_bug.cold+0xc0/0xce
__lock_acquire+0x130f/0x2590
lock_acquire+0x14e/0x2b0
_raw_spin_lock+0x30/0x40
sock_map_update_elem+0xdb/0x1f0
bpf_prog_2d0075e5d9b721cd_dump_unix+0x55/0x4f4
bpf_iter_run_prog+0x5b9/0xb00
bpf_iter_unix_seq_show+0x1f7/0x2e0
bpf_seq_read+0x42c/0x10d0
vfs_read+0x171/0xb20
ksys_read+0xff/0x200
do_syscall_64+0x6b/0x3a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: 2c860a43dd ("bpf: af_unix: Implement BPF iterator for UNIX domain socket.")
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Suggested-by: Martin KaFai Lau <martin.lau@linux.dev>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260414-unix-proto-update-null-ptr-deref-v4-2-2af6fe97918e@rbox.co
sock_map_sk_state_allowed() and sock_map_redirect_allowed() read af_unix
socket sk_state locklessly.
Use READ_ONCE(). Note that for sock_map_redirect_allowed() change affects
not only af_unix, but all non-TCP sockets (UDP, af_vsock).
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Suggested-by: Martin KaFai Lau <martin.lau@linux.dev>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260414-unix-proto-update-null-ptr-deref-v4-1-2af6fe97918e@rbox.co
API:
- Replace crypto_get_default_rng with crypto_stdrng_get_bytes.
- Remove simd skcipher support.
- Allow algorithm types to be disabled when CRYPTO_SELFTESTS is off.
Algorithms:
- Remove CPU-based des/3des acceleration.
- Add test vectors for authenc(hmac(md5),cbc(aes)).
- Add test vectors for authenc(hmac(md5),cbc(des)).
- Add test vectors for authenc(hmac(md5),rfc3686(ctr(aes))).
- Add test vectors for authenc(hmac(sha1),rfc3686(ctr(aes))).
- Add test vectors for authenc(hmac(sha224),rfc3686(ctr(aes))).
- Add test vectors for authenc(hmac(sha256),rfc3686(ctr(aes))).
- Add test vectors for authenc(hmac(sha384),rfc3686(ctr(aes))).
- Add test vectors for authenc(hmac(sha512),rfc3686(ctr(aes))).
- Replace spin lock with mutex in jitterentropy.
Drivers:
- Add authenc algorithms to safexcel.
- Add support for zstd in qat.
- Add wireless mode support for QAT GEN6.
- Add anti-rollback support for QAT GEN6.
- Add support for ctr(aes), gcm(aes), and ccm(aes) in dthev2.
-----BEGIN PGP SIGNATURE-----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=KoAB
-----END PGP SIGNATURE-----
Merge tag 'v7.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Replace crypto_get_default_rng with crypto_stdrng_get_bytes
- Remove simd skcipher support
- Allow algorithm types to be disabled when CRYPTO_SELFTESTS is off
Algorithms:
- Remove CPU-based des/3des acceleration
- Add test vectors for authenc(hmac(md5),cbc({aes,des})) and
authenc(hmac({md5,sha1,sha224,sha256,sha384,sha512}),rfc3686(ctr(aes)))
- Replace spin lock with mutex in jitterentropy
Drivers:
- Add authenc algorithms to safexcel
- Add support for zstd in qat
- Add wireless mode support for QAT GEN6
- Add anti-rollback support for QAT GEN6
- Add support for ctr(aes), gcm(aes), and ccm(aes) in dthev2"
* tag 'v7.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (129 commits)
crypto: af_alg - use sock_kmemdup in alg_setkey_by_key_serial
crypto: vmx - remove CRYPTO_DEV_VMX from Kconfig
crypto: omap - convert reqctx buffer to fixed-size array
crypto: atmel-sha204a - add Thorsten Blum as maintainer
crypto: atmel-ecc - add Thorsten Blum as maintainer
crypto: qat - fix IRQ cleanup on 6xxx probe failure
crypto: geniv - Remove unused spinlock from struct aead_geniv_ctx
crypto: qce - simplify qce_xts_swapiv()
crypto: hisilicon - Fix dma_unmap_single() direction
crypto: talitos - rename first/last to first_desc/last_desc
crypto: talitos - fix SEC1 32k ahash request limitation
crypto: jitterentropy - replace long-held spinlock with mutex
crypto: hisilicon - remove unused and non-public APIs for qm and sec
crypto: hisilicon/qm - drop redundant variable initialization
crypto: hisilicon/qm - remove else after return
crypto: hisilicon/qm - add const qualifier to info_name in struct qm_cmd_dump_item
crypto: hisilicon - fix the format string type error
crypto: ccree - fix a memory leak in cc_mac_digest()
crypto: qat - add support for zstd
crypto: qat - use swab32 macro
...
Everything:
Total patches: 368
Reviews/patch: 1.56
Reviewed rate: 74%
Excluding DAMON:
Total patches: 316
Reviews/patch: 1.77
Reviewed rate: 81%
Excluding DAMON and zram:
Total patches: 306
Reviews/patch: 1.81
Reviewed rate: 82%
Excluding DAMON, zram and maple_tree:
Total patches: 276
Reviews/patch: 2.01
Reviewed rate: 91%
Significant patch series in this merge:
- The 30 patch series "maple_tree: Replace big node with maple copy"
from Liam Howlett is mainly prepararatory work for ongoing development
but it does reduce stack usage and is an improvement.
- The 12 patch series "mm, swap: swap table phase III: remove swap_map"
from Kairui Song offers memory savings by removing the static swap_map.
It also yields some CPU savings and implements several cleanups.
- The 2 patch series "mm: memfd_luo: preserve file seals" from Pratyush
Yadav adds file seal preservation to LUO's memfd code.
- The 2 patch series "mm: zswap: add per-memcg stat for incompressible
pages" from Jiayuan Chen adds additional userspace stats reportng to
zswap.
- The 4 patch series "arch, mm: consolidate empty_zero_page" from Mike
Rapoport implements some cleanups for our handling of ZERO_PAGE() and
zero_pfn.
- The 2 patch series "mm/kmemleak: Improve scan_should_stop()
implementation" from Zhongqiu Han provides an robustness improvement and
some cleanups in the kmemleak code.
- The 4 patch series "Improve khugepaged scan logic" from Vernon Yang
"improves the khugepaged scan logic and reduces CPU consumption by
prioritizing scanning tasks that access memory frequently".
- The 2 patch series "Make KHO Stateless" from Jason Miu simplifies
Kexec Handover by "transitioning KHO from an xarray-based metadata
tracking system with serialization to a radix tree data structure that
can be passed directly to the next kernel"
- The 3 patch series "mm: vmscan: add PID and cgroup ID to vmscan
tracepoints" from Thomas Ballasi and Steven Rostedt enhances vmscan's
tracepointing.
- The 5 patch series "mm: arch/shstk: Common shadow stack mapping helper
and VM_NOHUGEPAGE" from Catalin Marinas is a cleanup for the shadow
stack code: remove per-arch code in favour of a generic implementation.
- The 2 patch series "Fix KASAN support for KHO restored vmalloc
regions" from Pasha Tatashin fixes a WARN() which can be emitted the KHO
restores a vmalloc area.
- The 4 patch series "mm: Remove stray references to pagevec" from Tal
Zussman provides several cleanups, mainly udpating references to "struct
pagevec", which became folio_batch three years ago.
- The 17 patch series "mm: Eliminate fake head pages from vmemmap
optimization" from Kiryl Shutsemau simplifies the HugeTLB vmemmap
optimization (HVO) by changing how tail pages encode their relationship
to the head page.
- The 2 patch series "mm/damon/core: improve DAMOS quota efficiency for
core layer filters" from SeongJae Park improves two problematic
behaviors of DAMOS that makes it less efficient when core layer filters
are used.
- The 3 patch series "mm/damon: strictly respect min_nr_regions" from
SeongJae Park improves DAMON usability by extending the treatment of the
min_nr_regions user-settable parameter.
- The 3 patch series "mm/page_alloc: pcp locking cleanup" from Vlastimil
Babka is a proper fix for a previously hotfixed SMP=n issue. Code
simplifications and cleanups ennsed.
- The 16 patch series "mm: cleanups around unmapping / zapping" from
David Hildenbrand implements "a bunch of cleanups around unmapping and
zapping. Mostly simplifications, code movements, documentation and
renaming of zapping functions".
- The 6 patch series "support batched checking of the young flag for
MGLRU" from Baolin Wang supports batched checking of the young flag for
MGLRU. It's part cleanups; one benchmark shows large performance
benefits for arm64.
- The 5 patch series "memcg: obj stock and slab stat caching cleanups"
from Johannes Weiner provides memcg cleanup and robustness improvements.
- The 5 patch series "Allow order zero pages in page reporting" from
Yuvraj Sakshith enhances page_reporting's free page reporting - it is
presently and undesirably order-0 pages when reporting free memory.
- The 6 patch series "mm: vma flag tweaks" from Lorenzo Stoakes is
cleanup work following from the recent conversion of the VMA flags to a
bitmap.
- The 10 patch series "mm/damon: add optional debugging-purpose sanity
checks" from SeongJae Park adds some more developer-facing debug checks
into DAMON core.
- The 2 patch series "mm/damon: test and document power-of-2
min_region_sz requirement" from SeongJae Park adds an additional DAMON
kunit test and makes some adjustments to the addr_unit parameter
handling.
- The 3 patch series "mm/damon/core: make passed_sample_intervals
comparisons overflow-safe" from SeongJae Park fixes a hard-to-hit time
overflow issue in DAMON core.
- The 7 patch series "mm/damon: improve/fixup/update ratio calculation,
test and documentation" from SeongJae Park is a "batch of misc/minor
improvements and fixups" for DAMON.
- The 4 patch series "mm: move vma_(kernel|mmu)_pagesize() out of
hugetlb.c" from David Hildenbrand fixes a possible issue with dax-device
when CONFIG_HUGETLB=n. Some code movement was required.
- The 6 patch series "zram: recompression cleanups and tweaks" from
Sergey Senozhatsky provides "a somewhat random mix of fixups,
recompression cleanups and improvements" in the zram code.
- The 11 patch series "mm/damon: support multiple goal-based quota
tuning algorithms" from SeongJae Park extend DAMOS quotas goal
auto-tuning to support multiple tuning algorithms that users can select.
- The 4 patch series "mm: thp: reduce unnecessary
start_stop_khugepaged()" from Breno Leitao fixes the khugpaged sysfs
handling so we no longer spam the logs with reams of junk when
starting/stopping khugepaged.
- The 3 patch series "mm: improve map count checks" from Lorenzo Stoakes
provides some cleanups and slight fixes in the mremap, mmap and vma
code.
- The 5 patch series "mm/damon: support addr_unit on default monitoring
targets for modules" from SeongJae Park extends the use of DAMON core's
addr_unit tunable.
- The 5 patch series "mm: khugepaged cleanups and mTHP prerequisites"
from Nico Pache provides cleanups in the khugepaged and is a base for
Nico's planned khugepaged mTHP support.
- The 15 patch series "mm: memory hot(un)plug and SPARSEMEM cleanups"
from David Hildenbrand implements code movement and cleanups in the
memhotplug and sparsemem code.
- The 2 patch series "mm: remove CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE and
cleanup CONFIG_MIGRATION" from David Hildenbrand rationalizes some
memhotplug Kconfig support.
- The 6 patch series "change young flag check functions to return bool"
from Baolin Wang is "a cleanup patchset to change all young flag check
functions to return bool".
- The 3 patch series "mm/damon/sysfs: fix memory leak and NULL
dereference issues" from Josh Law and SeongJae Park fixes a few
potential DAMON bugs.
- The 25 patch series "mm/vma: convert vm_flags_t to vma_flags_t in vma
code" from "converts a lot of the existing use of the legacy vm_flags_t
data type to the new vma_flags_t type which replaces it". Mainly in the
vma code.
- The 21 patch series "mm: expand mmap_prepare functionality and usage"
from Lorenzo Stoakes "expands the mmap_prepare functionality, which is
intended to replace the deprecated f_op->mmap hook which has been the
source of bugs and security issues for some time". Cleanups,
documentation, extension of mmap_prepare into filesystem drivers.
- The 13 patch series "mm/huge_memory: refactor zap_huge_pmd()" from
Lorenzo Stoakes simplifies and cleans up zap_huge_pmd(). Additional
cleanups around vm_normal_folio_pmd() and the softleaf functionality are
performed.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCad3HDQAKCRDdBJ7gKXxA
jrUQAPwNhPk5nPSxnyxjAeQtOBHqgCdnICeEismLajPKd9aYRgEA0s2XAu3tSUYi
GrBnWImHG3s4ePQxVcPCegWTsOUrXgQ=
=1Q7o
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "maple_tree: Replace big node with maple copy" (Liam Howlett)
Mainly prepararatory work for ongoing development but it does reduce
stack usage and is an improvement.
- "mm, swap: swap table phase III: remove swap_map" (Kairui Song)
Offers memory savings by removing the static swap_map. It also yields
some CPU savings and implements several cleanups.
- "mm: memfd_luo: preserve file seals" (Pratyush Yadav)
File seal preservation to LUO's memfd code
- "mm: zswap: add per-memcg stat for incompressible pages" (Jiayuan
Chen)
Additional userspace stats reportng to zswap
- "arch, mm: consolidate empty_zero_page" (Mike Rapoport)
Some cleanups for our handling of ZERO_PAGE() and zero_pfn
- "mm/kmemleak: Improve scan_should_stop() implementation" (Zhongqiu
Han)
A robustness improvement and some cleanups in the kmemleak code
- "Improve khugepaged scan logic" (Vernon Yang)
Improve khugepaged scan logic and reduce CPU consumption by
prioritizing scanning tasks that access memory frequently
- "Make KHO Stateless" (Jason Miu)
Simplify Kexec Handover by transitioning KHO from an xarray-based
metadata tracking system with serialization to a radix tree data
structure that can be passed directly to the next kernel
- "mm: vmscan: add PID and cgroup ID to vmscan tracepoints" (Thomas
Ballasi and Steven Rostedt)
Enhance vmscan's tracepointing
- "mm: arch/shstk: Common shadow stack mapping helper and
VM_NOHUGEPAGE" (Catalin Marinas)
Cleanup for the shadow stack code: remove per-arch code in favour of
a generic implementation
- "Fix KASAN support for KHO restored vmalloc regions" (Pasha Tatashin)
Fix a WARN() which can be emitted the KHO restores a vmalloc area
- "mm: Remove stray references to pagevec" (Tal Zussman)
Several cleanups, mainly udpating references to "struct pagevec",
which became folio_batch three years ago
- "mm: Eliminate fake head pages from vmemmap optimization" (Kiryl
Shutsemau)
Simplify the HugeTLB vmemmap optimization (HVO) by changing how tail
pages encode their relationship to the head page
- "mm/damon/core: improve DAMOS quota efficiency for core layer
filters" (SeongJae Park)
Improve two problematic behaviors of DAMOS that makes it less
efficient when core layer filters are used
- "mm/damon: strictly respect min_nr_regions" (SeongJae Park)
Improve DAMON usability by extending the treatment of the
min_nr_regions user-settable parameter
- "mm/page_alloc: pcp locking cleanup" (Vlastimil Babka)
The proper fix for a previously hotfixed SMP=n issue. Code
simplifications and cleanups ensued
- "mm: cleanups around unmapping / zapping" (David Hildenbrand)
A bunch of cleanups around unmapping and zapping. Mostly
simplifications, code movements, documentation and renaming of
zapping functions
- "support batched checking of the young flag for MGLRU" (Baolin Wang)
Batched checking of the young flag for MGLRU. It's part cleanups; one
benchmark shows large performance benefits for arm64
- "memcg: obj stock and slab stat caching cleanups" (Johannes Weiner)
memcg cleanup and robustness improvements
- "Allow order zero pages in page reporting" (Yuvraj Sakshith)
Enhance free page reporting - it is presently and undesirably order-0
pages when reporting free memory.
- "mm: vma flag tweaks" (Lorenzo Stoakes)
Cleanup work following from the recent conversion of the VMA flags to
a bitmap
- "mm/damon: add optional debugging-purpose sanity checks" (SeongJae
Park)
Add some more developer-facing debug checks into DAMON core
- "mm/damon: test and document power-of-2 min_region_sz requirement"
(SeongJae Park)
An additional DAMON kunit test and makes some adjustments to the
addr_unit parameter handling
- "mm/damon/core: make passed_sample_intervals comparisons
overflow-safe" (SeongJae Park)
Fix a hard-to-hit time overflow issue in DAMON core
- "mm/damon: improve/fixup/update ratio calculation, test and
documentation" (SeongJae Park)
A batch of misc/minor improvements and fixups for DAMON
- "mm: move vma_(kernel|mmu)_pagesize() out of hugetlb.c" (David
Hildenbrand)
Fix a possible issue with dax-device when CONFIG_HUGETLB=n. Some code
movement was required.
- "zram: recompression cleanups and tweaks" (Sergey Senozhatsky)
A somewhat random mix of fixups, recompression cleanups and
improvements in the zram code
- "mm/damon: support multiple goal-based quota tuning algorithms"
(SeongJae Park)
Extend DAMOS quotas goal auto-tuning to support multiple tuning
algorithms that users can select
- "mm: thp: reduce unnecessary start_stop_khugepaged()" (Breno Leitao)
Fix the khugpaged sysfs handling so we no longer spam the logs with
reams of junk when starting/stopping khugepaged
- "mm: improve map count checks" (Lorenzo Stoakes)
Provide some cleanups and slight fixes in the mremap, mmap and vma
code
- "mm/damon: support addr_unit on default monitoring targets for
modules" (SeongJae Park)
Extend the use of DAMON core's addr_unit tunable
- "mm: khugepaged cleanups and mTHP prerequisites" (Nico Pache)
Cleanups to khugepaged and is a base for Nico's planned khugepaged
mTHP support
- "mm: memory hot(un)plug and SPARSEMEM cleanups" (David Hildenbrand)
Code movement and cleanups in the memhotplug and sparsemem code
- "mm: remove CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE and cleanup
CONFIG_MIGRATION" (David Hildenbrand)
Rationalize some memhotplug Kconfig support
- "change young flag check functions to return bool" (Baolin Wang)
Cleanups to change all young flag check functions to return bool
- "mm/damon/sysfs: fix memory leak and NULL dereference issues" (Josh
Law and SeongJae Park)
Fix a few potential DAMON bugs
- "mm/vma: convert vm_flags_t to vma_flags_t in vma code" (Lorenzo
Stoakes)
Convert a lot of the existing use of the legacy vm_flags_t data type
to the new vma_flags_t type which replaces it. Mainly in the vma
code.
- "mm: expand mmap_prepare functionality and usage" (Lorenzo Stoakes)
Expand the mmap_prepare functionality, which is intended to replace
the deprecated f_op->mmap hook which has been the source of bugs and
security issues for some time. Cleanups, documentation, extension of
mmap_prepare into filesystem drivers
- "mm/huge_memory: refactor zap_huge_pmd()" (Lorenzo Stoakes)
Simplify and clean up zap_huge_pmd(). Additional cleanups around
vm_normal_folio_pmd() and the softleaf functionality are performed.
* tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm: fix deferred split queue races during migration
mm/khugepaged: fix issue with tracking lock
mm/huge_memory: add and use has_deposited_pgtable()
mm/huge_memory: add and use normal_or_softleaf_folio_pmd()
mm: add softleaf_is_valid_pmd_entry(), pmd_to_softleaf_folio()
mm/huge_memory: separate out the folio part of zap_huge_pmd()
mm/huge_memory: use mm instead of tlb->mm
mm/huge_memory: remove unnecessary sanity checks
mm/huge_memory: deduplicate zap deposited table call
mm/huge_memory: remove unnecessary VM_BUG_ON_PAGE()
mm/huge_memory: add a common exit path to zap_huge_pmd()
mm/huge_memory: handle buggy PMD entry in zap_huge_pmd()
mm/huge_memory: have zap_huge_pmd return a boolean, add kdoc
mm/huge: avoid big else branch in zap_huge_pmd()
mm/huge_memory: simplify vma_is_specal_huge()
mm: on remap assert that input range within the proposed VMA
mm: add mmap_action_map_kernel_pages[_full]()
uio: replace deprecated mmap hook with mmap_prepare in uio_info
drivers: hv: vmbus: replace deprecated mmap hook with mmap_prepare
mm: allow handling of stacked mmap_prepare hooks in more drivers
...
Core & protocols
----------------
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP.
- Number of code moves to help the compiler with inlining.
Avoid output arguments for returning drop reason where possible.
- Rework drop handling within qdiscs to include more metadata
about the reason and dropping qdisc in the tracepoints.
- Remove the rtnl_lock use from IP Multicast Routing.
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two.
- Report TCP delayed ack timer information via socket diag.
- Add ip_local_port_step_width sysctl to allow distributing the randomly
selected ports more evenly throughout the allowed space.
- Add support for per-route tunsrc in IPv6 segment routing.
- Start work of switching sockopt handling to iov_iter.
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up.
- Support MSG_EOR in MPTCP.
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage.
- Remove UDP-Lite support (as announced in 2023).
- Remove support for building IPv6 as a module.
Remove the now unnecessary function calling indirection.
Cross-tree stuff
----------------
- Move Michael MIC code from generic crypto into wireless,
it's considered insecure but some WiFi networks still need it.
Netfilter
---------
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate.
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex.
- Add more opinionated input validation to lower security exposure.
- Make IPVS hash tables to be per-netns and resizable.
Wireless
--------
- Finished assoc frame encryption/EPPKE/802.1X-over-auth.
- Radar detection improvements.
- Add 6 GHz incumbent signal detection APIs.
- Multi-link support for FILS, probe response templates and
client probing.
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware.
Driver API
----------
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs.
- Add standard counters for reporting pause storm events
(implement in mlx5 and fbnic).
- Add configuration API for completion writeback buffering
(implement in mana).
- Support driver-initiated change of RSS context sizes.
- Support DPLL monitoring input frequency (implement in zl3073x).
- Support per-port resources in devlink (implement in mlx5).
Misc
----
- Expand the YAML spec for Netfilter.
Drivers
-------
- Software:
- macvlan: support multicast rx for bridge ports with shared source
MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EhQZ
-----END PGP SIGNATURE-----
Merge tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP
- Number of code moves to help the compiler with inlining. Avoid
output arguments for returning drop reason where possible
- Rework drop handling within qdiscs to include more metadata about
the reason and dropping qdisc in the tracepoints
- Remove the rtnl_lock use from IP Multicast Routing
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two
- Report TCP delayed ack timer information via socket diag
- Add ip_local_port_step_width sysctl to allow distributing the
randomly selected ports more evenly throughout the allowed space
- Add support for per-route tunsrc in IPv6 segment routing
- Start work of switching sockopt handling to iov_iter
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up
- Support MSG_EOR in MPTCP
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage
- Remove UDP-Lite support (as announced in 2023)
- Remove support for building IPv6 as a module. Remove the now
unnecessary function calling indirection
Cross-tree stuff:
- Move Michael MIC code from generic crypto into wireless, it's
considered insecure but some WiFi networks still need it
Netfilter:
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex
- Add more opinionated input validation to lower security exposure
- Make IPVS hash tables to be per-netns and resizable
Wireless:
- Finished assoc frame encryption/EPPKE/802.1X-over-auth
- Radar detection improvements
- Add 6 GHz incumbent signal detection APIs
- Multi-link support for FILS, probe response templates and client
probing
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
Driver API:
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs
- Add standard counters for reporting pause storm events (implement
in mlx5 and fbnic)
- Add configuration API for completion writeback buffering (implement
in mana)
- Support driver-initiated change of RSS context sizes
- Support DPLL monitoring input frequency (implement in zl3073x)
- Support per-port resources in devlink (implement in mlx5)
Misc:
- Expand the YAML spec for Netfilter
Drivers
- Software:
- macvlan: support multicast rx for bridge ports with shared
source MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB
pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support"
* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wireguard: allowedips: remove redundant space
tools: ynl: add sample for wireguard
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
MAINTAINERS: Add netkit selftest files
selftests/net: Add additional test coverage in nk_qlease
selftests/net: Split netdevsim tests from HW tests in nk_qlease
tools/ynl: Make YnlFamily closeable as a context manager
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
net: airoha: Fix VIP configuration for AN7583 SoC
net: caif: clear client service pointer on teardown
net: strparser: fix skb_head leak in strp_abort_strp()
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
selftests/bpf: add test for xdp_master_redirect with bond not up
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
sctp: disable BH before calling udp_tunnel_xmit_skb()
sctp: fix missing encap_port propagation for GSO fragments
net: airoha: Rely on net_device pointer in ETS callbacks
...
-----BEGIN PGP SIGNATURE-----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=k6te
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Welcome new BPF maintainers: Kumar Kartikeya Dwivedi, Eduard
Zingerman while Martin KaFai Lau reduced his load to Reviwer.
- Lots of fixes everywhere from many first time contributors. Thank you
All.
- Diff stat is dominated by mechanical split of verifier.c into
multiple components:
- backtrack.c: backtracking logic and jump history
- states.c: state equivalence
- cfg.c: control flow graph, postorder, strongly connected
components
- liveness.c: register and stack liveness
- fixups.c: post-verification passes: instruction patching, dead
code removal, bpf_loop inlining, finalize fastcall
8k line were moved. verifier.c still stands at 20k lines.
Further refactoring is planned for the next release.
- Replace dynamic stack liveness with static stack liveness based on
data flow analysis.
This improved the verification time by 2x for some programs and
equally reduced memory consumption. New logic is in liveness.c and
supported by constant folding in const_fold.c (Eduard Zingerman,
Alexei Starovoitov)
- Introduce BTF layout to ease addition of new BTF kinds (Alan Maguire)
- Use kmalloc_nolock() universally in BPF local storage (Amery Hung)
- Fix several bugs in linked registers delta tracking (Daniel Borkmann)
- Improve verifier support of arena pointers (Emil Tsalapatis)
- Improve verifier tracking of register bounds in min/max and tnum
domains (Harishankar Vishwanathan, Paul Chaignon, Hao Sun)
- Further extend support for implicit arguments in the verifier (Ihor
Solodrai)
- Add support for nop,nop5 instruction combo for USDT probes in libbpf
(Jiri Olsa)
- Support merging multiple module BTFs (Josef Bacik)
- Extend applicability of bpf_kptr_xchg (Kaitao Cheng)
- Retire rcu_trace_implies_rcu_gp() (Kumar Kartikeya Dwivedi)
- Support variable offset context access for 'syscall' programs (Kumar
Kartikeya Dwivedi)
- Migrate bpf_task_work and dynptr to kmalloc_nolock() (Mykyta
Yatsenko)
- Fix UAF in in open-coded task_vma iterator (Puranjay Mohan)
* tag 'bpf-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (241 commits)
selftests/bpf: cover short IPv4/IPv6 inputs with adjust_room
bpf: reject short IPv4/IPv6 inputs in bpf_prog_test_run_skb
selftests/bpf: Use memfd_create instead of shm_open in cgroup_iter_memcg
selftests/bpf: Add test for cgroup storage OOB read
bpf: Fix OOB in pcpu_init_value
selftests/bpf: Fix reg_bounds to match new tnum-based refinement
selftests/bpf: Add tests for non-arena/arena operations
bpf: Allow instructions with arena source and non-arena dest registers
bpftool: add missing fsession to the usage and docs of bpftool
docs/bpf: add missing fsession attach type to docs
bpf: add missing fsession to the verifier log
bpf: Move BTF checking logic into check_btf.c
bpf: Move backtracking logic to backtrack.c
bpf: Move state equivalence logic to states.c
bpf: Move check_cfg() into cfg.c
bpf: Move compute_insn_live_regs() into liveness.c
bpf: Move fixup/post-processing logic from verifier.c into fixups.c
bpf: Simplify do_check_insn()
bpf: Move checks for reserved fields out of the main pass
bpf: Delete unused variable
...
Merge in late fixes in preparation for the net-next PR.
Conflicts:
include/net/sch_generic.h
a6bd339dbb ("net_sched: fix skb memory leak in deferred qdisc drops")
ff2998f29f ("net: sched: introduce qdisc-specific drop reason tracing")
https://lore.kernel.org/adz0iX85FHMz0HdO@sirena.org.uk
drivers/net/ethernet/airoha/airoha_eth.c
1acdfbdb51 ("net: airoha: Fix VIP configuration for AN7583 SoC")
bf3471e6e6 ("net: airoha: Make flow control source port mapping dependent on nbq parameter")
Adjacent changes:
drivers/net/ethernet/airoha/airoha_ppe.c
f44218cd5e ("net: airoha: Reset PPE cpu port configuration in airoha_ppe_hw_init()")
7da62262ec ("inet: add ip_local_port_step_width sysctl to improve port usage distribution")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
`caif_connect()` can tear down an existing client after remote shutdown by
calling `caif_disconnect_client()` followed by `caif_free_client()`.
`caif_free_client()` releases the service layer referenced by
`adap_layer->dn`, but leaves that pointer stale.
When the socket is later destroyed, `caif_sock_destructor()` calls
`caif_free_client()` again and dereferences the freed service pointer.
Clear the client/service links before releasing the service object so
repeated teardown becomes harmless.
Fixes: 43e3692101 ("caif: Move refcount from service layer to sock and dev.")
Cc: stable@kernel.org
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Tested-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Zhengchuan Liang <zcliangcn@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Link: https://patch.msgid.link/9f3d37847c0037568aae698ca23cd47c6691acb0.1775897577.git.zcliangcn@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When the stream parser is aborted, for example after a message assembly timeout,
it can still hold a reference to a partially assembled message in
strp->skb_head.
That skb is not released in strp_abort_strp(), which leaks the partially
assembled message and can be triggered repeatedly to exhaust memory.
Fix this by freeing strp->skb_head and resetting the parser state in the
abort path. Leave strp_stop() unchanged so final cleanup still happens in
strp_done() after the work and timer have been synchronized.
Fixes: 43a0c6751a ("strparser: Stream parser for messages")
Cc: stable@kernel.org
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Tested-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Luxiao Xu <rakukuip@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Link: https://patch.msgid.link/ade3857a9404999ce9a1c27ec523efc896072678.1775482694.git.rakukuip@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
syzkaller reported a kernel panic in bond_rr_gen_slave_id() reached via
xdp_master_redirect(). Full decoded trace:
https://syzkaller.appspot.com/bug?extid=80e046b8da2820b6ba73
bond_rr_gen_slave_id() dereferences bond->rr_tx_counter, a per-CPU
counter that bonding only allocates in bond_open() when the mode is
round-robin. If the bond device was never brought up, rr_tx_counter
stays NULL.
The XDP redirect path can still reach that code on a bond that was
never opened: bpf_master_redirect_enabled_key is a global static key,
so as soon as any bond device has native XDP attached, the
XDP_TX -> xdp_master_redirect() interception is enabled for every
slave system-wide. The path xdp_master_redirect() ->
bond_xdp_get_xmit_slave() -> bond_xdp_xmit_roundrobin_slave_get() ->
bond_rr_gen_slave_id() then runs against a bond that has no
rr_tx_counter and crashes.
Fix this in the generic xdp_master_redirect() by refusing to call into
the master's ->ndo_xdp_get_xmit_slave() when the master device is not
up. IFF_UP is only set after ->ndo_open() has successfully returned,
so this reliably excludes masters whose XDP state has not been fully
initialized. Drop the frame with XDP_ABORTED so the exception is
visible via trace_xdp_exception() rather than silently falling through.
This is not specific to bonding: any current or future master that
defers XDP state allocation to ->ndo_open() is protected.
Fixes: 879af96ffd ("net, core: Add support for XDP redirection to slave device")
Reported-by: syzbot+80e046b8da2820b6ba73@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/698f84c6.a70a0220.2c38d7.00cc.GAE@google.com/T/
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://patch.msgid.link/20260411005524.201200-2-jiayuan.chen@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- Migrate more hash algorithms from the traditional crypto subsystem
to lib/crypto/.
Like the algorithms migrated earlier (e.g. SHA-*), this simplifies
the implementations, improves performance, enables further
simplifications in calling code, and solves various other issues:
- AES CBC-based MACs (AES-CMAC, AES-XCBC-MAC, and AES-CBC-MAC)
- Support these algorithms in lib/crypto/ using the AES
library and the existing arm64 assembly code
- Reimplement the traditional crypto API's "cmac(aes)",
"xcbc(aes)", and "cbcmac(aes)" on top of the library
- Convert mac80211 to use the AES-CMAC library. Note: several
other subsystems can use it too and will be converted later
- Drop the broken, nonstandard, and likely unused support for
"xcbc(aes)" with key lengths other than 128 bits
- Enable optimizations by default
- GHASH
- Migrate the standalone GHASH code into lib/crypto/
- Integrate the GHASH code more closely with the very similar
POLYVAL code, and improve the generic GHASH implementation
to resist cache-timing attacks and use much less memory
- Reimplement the AES-GCM library and the "gcm" crypto_aead
template on top of the GHASH library. Remove "ghash" from
the crypto_shash API, as it's no longer needed
- Enable optimizations by default
- SM3
- Migrate the kernel's existing SM3 code into lib/crypto/, and
reimplement the traditional crypto API's "sm3" on top of it
- I don't recommend using SM3, but this cleanup is worthwhile
to organize the code the same way as other algorithms
- Testing improvements
- Add a KUnit test suite for each of the new library APIs
- Migrate the existing ChaCha20Poly1305 test to KUnit
- Make the KUnit all_tests.config enable all crypto library tests
- Move the test kconfig options to the Runtime Testing menu
- Other updates to arch-optimized crypto code
- Optimize SHA-256 for Zhaoxin CPUs using the Padlock Hash Engine
- Remove some MD5 implementations that are no longer worth keeping
- Drop big endian and voluntary preemption support from the arm64
code, as those configurations are no longer supported on arm64
- Make jitterentropy and samples/tsm-mr use the crypto library APIs
Note: the overall diffstat is neutral, but when the test code is
excluded it is significantly negative:
Tests: 13 files changed, 1982 insertions(+), 888 deletions(-)
Non-test: 141 files changed, 2897 insertions(+), 3987 deletions(-)
All: 154 files changed, 4879 insertions(+), 4875 deletions(-)
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCadWPyxQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK8QCAQD0i98miI1mu01RKuEwrBzmn7L/2sUH
ReYV/dFDtnN0GwD+KMCiNAM2XTVLRKq5t3OxPHpKZ4y+gZwRowAJeFA02Q8=
=5rip
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
- Migrate more hash algorithms from the traditional crypto subsystem to
lib/crypto/
Like the algorithms migrated earlier (e.g. SHA-*), this simplifies
the implementations, improves performance, enables further
simplifications in calling code, and solves various other issues:
- AES CBC-based MACs (AES-CMAC, AES-XCBC-MAC, and AES-CBC-MAC)
- Support these algorithms in lib/crypto/ using the AES library
and the existing arm64 assembly code
- Reimplement the traditional crypto API's "cmac(aes)",
"xcbc(aes)", and "cbcmac(aes)" on top of the library
- Convert mac80211 to use the AES-CMAC library. Note: several
other subsystems can use it too and will be converted later
- Drop the broken, nonstandard, and likely unused support for
"xcbc(aes)" with key lengths other than 128 bits
- Enable optimizations by default
- GHASH
- Migrate the standalone GHASH code into lib/crypto/
- Integrate the GHASH code more closely with the very similar
POLYVAL code, and improve the generic GHASH implementation to
resist cache-timing attacks and use much less memory
- Reimplement the AES-GCM library and the "gcm" crypto_aead
template on top of the GHASH library. Remove "ghash" from the
crypto_shash API, as it's no longer needed
- Enable optimizations by default
- SM3
- Migrate the kernel's existing SM3 code into lib/crypto/, and
reimplement the traditional crypto API's "sm3" on top of it
- I don't recommend using SM3, but this cleanup is worthwhile
to organize the code the same way as other algorithms
- Testing improvements:
- Add a KUnit test suite for each of the new library APIs
- Migrate the existing ChaCha20Poly1305 test to KUnit
- Make the KUnit all_tests.config enable all crypto library tests
- Move the test kconfig options to the Runtime Testing menu
- Other updates to arch-optimized crypto code:
- Optimize SHA-256 for Zhaoxin CPUs using the Padlock Hash Engine
- Remove some MD5 implementations that are no longer worth keeping
- Drop big endian and voluntary preemption support from the arm64
code, as those configurations are no longer supported on arm64
- Make jitterentropy and samples/tsm-mr use the crypto library APIs
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (66 commits)
lib/crypto: arm64: Assume a little-endian kernel
arm64: fpsimd: Remove obsolete cond_yield macro
lib/crypto: arm64/sha3: Remove obsolete chunking logic
lib/crypto: arm64/sha512: Remove obsolete chunking logic
lib/crypto: arm64/sha256: Remove obsolete chunking logic
lib/crypto: arm64/sha1: Remove obsolete chunking logic
lib/crypto: arm64/poly1305: Remove obsolete chunking logic
lib/crypto: arm64/gf128hash: Remove obsolete chunking logic
lib/crypto: arm64/chacha: Remove obsolete chunking logic
lib/crypto: arm64/aes: Remove obsolete chunking logic
lib/crypto: Include <crypto/utils.h> instead of <crypto/algapi.h>
lib/crypto: aesgcm: Don't disable IRQs during AES block encryption
lib/crypto: aescfb: Don't disable IRQs during AES block encryption
lib/crypto: tests: Migrate ChaCha20Poly1305 self-test to KUnit
lib/crypto: sparc: Drop optimized MD5 code
lib/crypto: mips: Drop optimized MD5 code
lib: Move crypto library tests to Runtime Testing menu
crypto: sm3 - Remove 'struct sm3_state'
crypto: sm3 - Remove the original "sm3_block_generic()"
crypto: sm3 - Remove sm3_base.h
...
udp_tunnel_xmit_skb() / udp_tunnel6_xmit_skb() are expected to run with
BH disabled. After commit 6f1a9140ec ("add xmit recursion limit to
tunnel xmit functions"), on the path:
udp(6)_tunnel_xmit_skb() -> ip(6)tunnel_xmit()
dev_xmit_recursion_inc()/dec() must stay balanced on the same CPU.
Without local_bh_disable(), the context may move between CPUs, which can
break the inc/dec pairing. This may lead to incorrect recursion level
detection and cause packets to be dropped in ip(6)_tunnel_xmit() or
__dev_queue_xmit().
Fix it by disabling BH around both IPv4 and IPv6 SCTP UDP xmit paths.
In my testing, after enabling the SCTP over UDP:
# ip net exec ha sysctl -w net.sctp.udp_port=9899
# ip net exec ha sysctl -w net.sctp.encap_port=9899
# ip net exec hb sysctl -w net.sctp.udp_port=9899
# ip net exec hb sysctl -w net.sctp.encap_port=9899
# ip net exec ha iperf3 -s
- without this patch:
# ip net exec hb iperf3 -c 192.168.0.1 --sctp
[ 5] 0.00-10.00 sec 37.2 MBytes 31.2 Mbits/sec sender
[ 5] 0.00-10.00 sec 37.1 MBytes 31.1 Mbits/sec receiver
- with this patch:
# ip net exec hb iperf3 -c 192.168.0.1 --sctp
[ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec sender
[ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec receiver
Fixes: 6f1a9140ec ("net: add xmit recursion limit to tunnel xmit functions")
Fixes: 046c052b47 ("sctp: enable udp tunneling socks")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://patch.msgid.link/c874a8548221dcd56ff03c65ba75a74e6cf99119.1776017727.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
encap_port in SCTP_INPUT_CB(skb) is used by sctp_vtag_verify() for
SCTP-over-UDP processing. In the GSO case, it is only set on the head
skb, while fragment skbs leave it 0.
This results in fragment skbs seeing encap_port == 0, breaking
SCTP-over-UDP connections.
Fix it by propagating encap_port from the head skb cb when initializing
fragment skbs in sctp_inq_pop().
Fixes: 046c052b47 ("sctp: enable udp tunneling socks")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://patch.msgid.link/ea65ed61b3598d8b4940f0170b9aa1762307e6c3.1776017631.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit de5626b95e ("tcp: Factorise cookie-independent fields
initialisation in cookie_v[46]_check().") miscategorised
tcp_rsk(req)->req_usec_ts init to cookie_tcp_reqsk_init(),
which is used by both BPF/non-BPF SYN cookie reqsk.
Rather, it should have been moved to cookie_tcp_reqsk_alloc() by
commit 8e7bab6b96 ("tcp: Factorise cookie-dependent fields
initialisation in cookie_v[46]_check()") so that only non-BPF SYN
cookie sets tcp_rsk(req)->req_usec_ts to false.
Let's move the initialisation to cookie_tcp_reqsk_alloc() to
respect bpf_tcp_req_attrs.usec_ts_ok.
Fixes: e472f88891 ("bpf: tcp: Support arbitrary SYN Cookie.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260410235328.1773449-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Back in 2024 I reported a 7-12% regression on an iperf3 UDP loopback
thoughput test that we traced to the extra overhead of calling
compute_score on two places, introduced by commit f0ea27e7bf ("udp:
re-score reuseport groups when connected sockets are present"). At the
time, I pointed out the overhead was caused by the multiple calls,
associated with cpu-specific mitigations, and merged commit
50aee97d15 ("udp: Avoid call to compute_score on multiple sites") to
jump back explicitly, to force the rescore call in a single place.
Recently though, we got another regression report against a newer distro
version, which a team colleague traced back to the same root-cause.
Turns out that once we updated to gcc-13, the compiler got smart enough
to unroll the loop, undoing my previous mitigation. Let's bite the
bullet and __always_inline compute_score on both ipv4 and ipv6 to
prevent gcc from de-optimizing it again in the future. These functions
are only called in two places each, udpX_lib_lookup1 and
udpX_lib_lookup2, so the extra size shouldn't be a problem and it is hot
enough to be very visible in profilings. In fact, with gcc13, forcing
the inline will prevent gcc from unrolling the fix from commit
50aee97d15, so we don't end up increasing udpX_lib_lookup2 at all.
I haven't recollected the results myself, as I don't have access to the
machine at the moment. But the same colleague reported 4.67%
inprovement with this patch in the loopback benchmark, solving the
regression report within noise margins.
Eric Dumazet reported no size change to vmlinux when built with clang.
I report the same also with gcc-13:
scripts/bloat-o-meter vmlinux vmlinux-inline
add/remove: 0/2 grow/shrink: 4/0 up/down: 616/-416 (200)
Function old new delta
udp6_lib_lookup2 762 949 +187
__udp6_lib_lookup 810 975 +165
udp4_lib_lookup2 757 906 +149
__udp4_lib_lookup 871 986 +115
__pfx_compute_score 32 - -32
compute_score 384 - -384
Total: Before=35011784, After=35011984, chg +0.00%
Fixes: 50aee97d15 ("udp: Avoid call to compute_score on multiple sites")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://patch.msgid.link/20260410155936.654915-1-krisman@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCadfgCxAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbSl5cA/0QZjJ+4V2DVzJQM5qzmNK9He9uYaOs7F2Ks
xRvg7IebAPwMEcVY+CVQxD+YGj08UgM753yx4CRbhsu4k5mowEEJDQ==
=Lz9R
-----END PGP SIGNATURE-----
Merge tag 'landlock-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull Landlock update from Mickaël Salaün:
"This adds a new Landlock access right for pathname UNIX domain sockets
thanks to a new LSM hook, and a few fixes"
* tag 'landlock-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: (23 commits)
landlock: Document fallocate(2) as another truncation corner case
landlock: Document FS access right for pathname UNIX sockets
selftests/landlock: Simplify ruleset creation and enforcement in fs_test
selftests/landlock: Check that coredump sockets stay unrestricted
selftests/landlock: Audit test for LANDLOCK_ACCESS_FS_RESOLVE_UNIX
selftests/landlock: Test LANDLOCK_ACCESS_FS_RESOLVE_UNIX
selftests/landlock: Replace access_fs_16 with ACCESS_ALL in fs_test
samples/landlock: Add support for named UNIX domain socket restrictions
landlock: Clarify BUILD_BUG_ON check in scoping logic
landlock: Control pathname UNIX domain socket resolution by path
landlock: Use mem_is_zero() in is_layer_masks_allowed()
lsm: Add LSM hook security_unix_find
landlock: Fix kernel-doc warning for pointer-to-array parameters
landlock: Fix formatting in tsync.c
landlock: Improve kernel-doc "Return:" section consistency
landlock: Add missing kernel-doc "Return:" sections
selftests/landlock: Fix format warning for __u64 in net_test
selftests/landlock: Skip stale records in audit_match_record()
selftests/landlock: Drain stale audit records on init
selftests/landlock: Fix socket file descriptor leaks in audit helpers
...
In the remove callback, if a packet arrives after destroy_workqueue() is
called, but before sock_release(), the qrtr_ns_data_ready() callback will
try to queue the work, causing use-after-free issue.
Fix this issue by saving the default 'sk_data_ready' callback during
qrtr_ns_init() and use it to replace the qrtr_ns_data_ready() callback at
the start of remove(). This ensures that even if a packet arrives after
destroy_workqueue(), the work struct will not be dereferenced.
Note that it is also required to ensure that the RX threads are completed
before destroying the workqueue, because the threads could be using the
qrtr_ns_data_ready() callback.
Cc: stable@vger.kernel.org
Fixes: 0c2204a4ad ("net: qrtr: Migrate nameservice to kernel from userspace")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260409-qrtr-fix-v3-5-00a8a5ff2b51@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the nameserver doesn't limit the number of nodes it handles.
This can be an attack vector if a malicious client starts registering
random nodes, leading to memory exhaustion.
Hence, limit the maximum number of nodes to 64. Note that, limit of 64 is
chosen based on the current platform requirements. If requirement changes
in the future, this limit can be increased.
Cc: stable@vger.kernel.org
Fixes: 0c2204a4ad ("net: qrtr: Migrate nameservice to kernel from userspace")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260409-qrtr-fix-v3-4-00a8a5ff2b51@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A node sends the BYE packet when it is about to go down. So the nameserver
should advertise the removal of the node to all remote and local observers
and free the node finally. But currently, the nameserver doesn't free the
node memory even after processing the BYE packet. This causes the node
memory to leak.
Hence, remove the node from Xarray list and free the node memory during
both success and failure case of ctrl_cmd_bye().
Cc: stable@vger.kernel.org
Fixes: 0c2204a4ad ("net: qrtr: Migrate nameservice to kernel from userspace")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260409-qrtr-fix-v3-3-00a8a5ff2b51@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current code does no bound checking on the number of lookups a client can
perform. Though the code restricts the lookups to local clients, there is
still a possibility of a malicious local client sending a flood of
NEW_LOOKUP messages over the same socket.
Fix this issue by limiting the maximum number of lookups to 64 globally.
Since the nameserver allows only atmost one local observer, this global
lookup count will ensure that the lookups stay within the limit.
Note that, limit of 64 is chosen based on the current platform
requirements. If requirement changes in the future, this limit can be
increased.
Cc: stable@vger.kernel.org
Fixes: 0c2204a4ad ("net: qrtr: Migrate nameservice to kernel from userspace")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260409-qrtr-fix-v3-2-00a8a5ff2b51@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current code does no bound checking on the number of servers added per
node. A malicious client can flood NEW_SERVER messages and exhaust memory.
Fix this issue by limiting the maximum number of server registrations to
256 per node. If the NEW_SERVER message is received for an old port, then
don't restrict it as it will get replaced. While at it, also rate limit
the error messages in the failure path of qrtr_ns_worker().
Note that the limit of 256 is chosen based on the current platform
requirements. If requirement changes in the future, this limit can be
increased.
Cc: stable@vger.kernel.org
Fixes: 0c2204a4ad ("net: qrtr: Migrate nameservice to kernel from userspace")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260409-qrtr-fix-v3-1-00a8a5ff2b51@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert CAN raw socket's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of copy_to_user()
- For CAN_RAW_FILTER and CAN_RAW_XL_VCID_OPTS: on -ERANGE, set
opt->optlen to the required buffer size. The wrapper writes this
back to userspace even on error, preserving the existing API that
lets userspace discover the needed allocation size.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260408-getsockopt-v3-4-061bb9cb355d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert AF_PACKET's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of put_user()/copy_to_user()
- For PACKET_HDRLEN which reads from optval: use opt->iter_in with
copy_from_iter() for the input read, then the common opt->iter_out
copy_to_iter() epilogue handles the output
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260408-getsockopt-v3-3-061bb9cb355d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update do_sock_getsockopt() to use the new getsockopt_iter callback
when available. Add do_sock_getsockopt_iter() helper that:
1. Reads optlen from user/kernel space
2. Initializes a sockopt_t with the appropriate iov_iter (kvec for
kernel, ubuf for user buffers) and sets opt.optlen
3. Calls the protocol's getsockopt_iter callback
4. Writes opt.optlen back to user/kernel space
The optlen is always written back, even on failure. Some protocols
(e.g. CAN raw) return -ERANGE and set optlen to the required buffer
size so userspace knows how much to allocate.
The callback is responsible for setting opt.optlen to indicate the
returned data size.
Important to say that iov_out does not need to be copied back in
do_sock_getsockopt().
When optval is not kernel (the userspace path), sockptr_to_sockopt()
sets up opt->iter_out as a ITER_DEST ubuf iterator pointing directly at
the userspace buffer (optval.user). So when getsockopt_iter
implementations call copy_to_iter(..., &opt->iter_out), the data is
written directly to userspace — no intermediate kernel buffer is
involved.
When optval.is_kernel is true (the in-kernel path, e.g. from io_uring),
the kvec points at the already-provided kernel buffer (optval.kernel),
so the data lands in the caller's buffer directly via the kvec-backed
iterator.
In both cases the iterator writes to the final destination in-place at
protocol callback. There's nothing to copy back — only optlen needs to
be written back.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260408-getsockopt-v3-2-061bb9cb355d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
core:
- hci_core: Rate limit the logging of invalid ISO handle
- hci_sync: make hci_cmd_sync_run_once return -EEXIST if exists
- hci_event: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER
- hci_event: fix potential UAF in SSP passkey handlers
- HCI: Avoid a couple -Wflex-array-member-not-at-end warnings
- L2CAP: CoC: Disconnect if received packet size exceeds MPS
- L2CAP: Add missing chan lock in l2cap_ecred_reconf_rsp
- L2CAP: Fix printing wrong information if SDU length exceeds MTU
- SCO: check for codecs->num_codecs == 1 before assigning to sco_pi(sk)->codec
drivers:
- btusb: MT7922: Add VID/PID 0489/e174
- btusb: Add Lite-On 04ca:3807 for MediaTek MT7921
- btusb: Add MT7927 IDs ASUS ROG Crosshair X870E Hero, Lenovo Legion Pro 7
16ARX9, Gigabyte Z790 AORUS MASTER X, MSI X870E Ace Max, TP-Link
Archer TBE550E, ASUS X870E / ProArt X870E-Creator.
- btusb: Add MT7902 IDs 13d3/3579, 13d3/3580, 13d3/3594, 13d3/3596, 0e8d/1ede
- btusb: Add MT7902 IDs 13d3/3579, 13d3/3580, 13d3/3594, 13d3/3596, 0e8d/1ede
- btusb: MediaTek MT7922: Add VID 0489 & PID e11d
- btintel: Add support for Scorpious Peak2 support
- btintel: Add support for Scorpious Peak2F support
- btintel_pcie: Add device id of Scorpius Peak2, Nova Lake-PCD-H
- btintel_pcie: Add device id of Scorpious2, Nova Lake-PCD-S
- btmtk: Add reset mechanism if downloading firmware failed
- btmtk: Add MT6639 (MT7927) Bluetooth support
- btmtk: fix ISO interface setup for single alt setting
- btmtk: add MT7902 SDIO support
- Bluetooth: btmtk: add MT7902 MCU support
- btbcm: Add entry for BCM4343A2 UART Bluetooth
- qca: enable pwrseq support for wcn39xx devices
- hci_qca: Fix BT not getting powered-off on rmmod
- hci_qca: disable power control for WCN7850 when bt_en is not defined
- hci_qca: Fix missing wakeup during SSR memdump handling
- hci_ldisc: Clear HCI_UART_PROTO_INIT on error
- mmc: sdio: add MediaTek MT7902 SDIO device ID
- hci_ll: Enable BROKEN_ENHANCED_SETUP_SYNC_CONN for WL183x
-----BEGIN PGP SIGNATURE-----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=jFF1
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
core:
- hci_core: Rate limit the logging of invalid ISO handle
- hci_sync: make hci_cmd_sync_run_once return -EEXIST if exists
- hci_event: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER
- hci_event: fix potential UAF in SSP passkey handlers
- HCI: Avoid a couple -Wflex-array-member-not-at-end warnings
- L2CAP: CoC: Disconnect if received packet size exceeds MPS
- L2CAP: Add missing chan lock in l2cap_ecred_reconf_rsp
- L2CAP: Fix printing wrong information if SDU length exceeds MTU
- SCO: check for codecs->num_codecs == 1 before assigning to sco_pi(sk)->codec
drivers:
- btusb: MT7922: Add VID/PID 0489/e174
- btusb: Add Lite-On 04ca:3807 for MediaTek MT7921
- btusb: Add MT7927 IDs ASUS ROG Crosshair X870E Hero, Lenovo Legion Pro 7
16ARX9, Gigabyte Z790 AORUS MASTER X, MSI X870E Ace Max, TP-Link
Archer TBE550E, ASUS X870E / ProArt X870E-Creator.
- btusb: Add MT7902 IDs 13d3/3579, 13d3/3580, 13d3/3594, 13d3/3596, 0e8d/1ede
- btusb: Add MT7902 IDs 13d3/3579, 13d3/3580, 13d3/3594, 13d3/3596, 0e8d/1ede
- btusb: MediaTek MT7922: Add VID 0489 & PID e11d
- btintel: Add support for Scorpious Peak2 support
- btintel: Add support for Scorpious Peak2F support
- btintel_pcie: Add device id of Scorpius Peak2, Nova Lake-PCD-H
- btintel_pcie: Add device id of Scorpious2, Nova Lake-PCD-S
- btmtk: Add reset mechanism if downloading firmware failed
- btmtk: Add MT6639 (MT7927) Bluetooth support
- btmtk: fix ISO interface setup for single alt setting
- btmtk: add MT7902 SDIO support
- Bluetooth: btmtk: add MT7902 MCU support
- btbcm: Add entry for BCM4343A2 UART Bluetooth
- qca: enable pwrseq support for wcn39xx devices
- hci_qca: Fix BT not getting powered-off on rmmod
- hci_qca: disable power control for WCN7850 when bt_en is not defined
- hci_qca: Fix missing wakeup during SSR memdump handling
- hci_ldisc: Clear HCI_UART_PROTO_INIT on error
- mmc: sdio: add MediaTek MT7902 SDIO device ID
- hci_ll: Enable BROKEN_ENHANCED_SETUP_SYNC_CONN for WL183x
* tag 'for-net-next-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (59 commits)
Bluetooth: hci_qca: Fix missing wakeup during SSR memdump handling
Bluetooth: btintel_pcie: use strscpy to copy plain strings
Bluetooth: hci_event: fix potential UAF in SSP passkey handlers
Bluetooth: hci.h: Avoid a couple -Wflex-array-member-not-at-end warnings
Bluetooth: SCO: check for codecs->num_codecs == 1 before assigning to sco_pi(sk)->codec
Bluetooth: btintel_pcie: Align shared DMA memory to 128 bytes
Bluetooth: l2cap: Add missing chan lock in l2cap_ecred_reconf_rsp
Bluetooth: hci_ll: Enable BROKEN_ENHANCED_SETUP_SYNC_CONN for WL183x
Bluetooth: btusb: MediaTek MT7922: Add VID 0489 & PID e11d
Bluetooth: btmtk: hide unused btmtk_mt6639_devs[] array
Bluetooth: btusb: Add MT7927 ID for ASUS X870E / ProArt X870E-Creator
Bluetooth: btusb: Add MT7927 ID for TP-Link Archer TBE550E
Bluetooth: btusb: Add MT7927 ID for MSI X870E Ace Max
Bluetooth: btusb: Add MT7927 ID for Gigabyte Z790 AORUS MASTER X
Bluetooth: btusb: Add MT7927 ID for Lenovo Legion Pro 7 16ARX9
Bluetooth: btusb: Add MT7927 ID for ASUS ROG Crosshair X870E Hero
Bluetooth: btmtk: fix ISO interface setup for single alt setting
Bluetooth: btmtk: Add MT6639 (MT7927) Bluetooth support
Bluetooth: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER
Bluetooth: btmtk: refactor endpoint lookup
...
====================
Link: https://patch.msgid.link/20260413132247.320961-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Please consider pulling these changes from the signed vfs-7.1-rc1.kino tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCadjZCgAKCRCRxhvAZXjc
otmnAP4sbsxZQdz2TG2hJuOwnEZOkkxZQOUMc3ERVyZaWXIeTAEA7e5M+8FpoG9n
8ipO76UoaXdGLESrqVdp9EOhLqOW7QY=
=uMeJ
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.1-rc1.kino' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs i_ino updates from Christian Brauner:
"For historical reasons, the inode->i_ino field is an unsigned long,
which means that it's 32 bits on 32 bit architectures. This has caused
a number of filesystems to implement hacks to hash a 64-bit identifier
into a 32-bit field, and deprives us of a universal identifier field
for an inode.
This changes the inode->i_ino field from an unsigned long to a u64.
This shouldn't make any material difference on 64-bit hosts, but
32-bit hosts will see struct inode grow by at least 4 bytes. This
could have effects on slabcache sizes and field alignment.
The bulk of the changes are to format strings and tracepoints, since
the kernel itself doesn't care that much about the i_ino field. The
first patch changes some vfs function arguments, so check that one out
carefully.
With this change, we may be able to shrink some inode structures. For
instance, struct nfs_inode has a fileid field that holds the 64-bit
inode number. With this set of changes, that field could be
eliminated. I'd rather leave that sort of cleanups for later just to
keep this simple"
* tag 'vfs-7.1-rc1.kino' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
nilfs2: fix 64-bit division operations in nilfs_bmap_find_target_in_group()
EVM: add comment describing why ino field is still unsigned long
vfs: remove externs from fs.h on functions modified by i_ino widening
treewide: fix missed i_ino format specifier conversions
ext4: fix signed format specifier in ext4_load_inode trace event
treewide: change inode->i_ino from unsigned long to u64
nilfs2: widen trace event i_ino fields to u64
f2fs: widen trace event i_ino fields to u64
ext4: widen trace event i_ino fields to u64
zonefs: widen trace event i_ino fields to u64
hugetlbfs: widen trace event i_ino fields to u64
ext2: widen trace event i_ino fields to u64
cachefiles: widen trace event i_ino fields to u64
vfs: widen trace event i_ino fields to u64
net: change sock.sk_ino and sock_i_ino() to u64
audit: widen ino fields to u64
vfs: widen inode hash/lookup functions to u64
rpcrdma_post_recvs() runs in CQ poll context and its cost
falls on the latency-critical path between polling a Receive
completion and waking the RPC consumer. Every cycle spent
refilling the Receive Queue delays delivery of the reply to
the NFS layer.
Move the rpcrdma_post_recvs() call in rpcrdma_reply_handler()
to after the RPC has been decoded and completed. The larger
batch size from the preceding patch provides sufficient
Receive Queue headroom to absorb the brief delay before
buffers are replenished.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The fixed RPCRDMA_MAX_RECV_BATCH of 7 results in frequent
small ib_post_recv batches during high-rate workloads. With
a 128-slot credit window, receives are reposted every 7th
completion, each batch incurring atomic serialization and a
doorbell write.
Replace the fixed batch constant with a per-endpoint value
scaled to 25% of the negotiated credit window. For a typical
128-credit connection this raises the batch from 7 to 32,
reducing doorbell frequency by roughly 4x and amortizing the
per-batch atomic and MMIO costs over a larger group of
receive WRs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The FRWR registration path converts data through three
representations: xdr_buf -> rpcrdma_mr_seg[] -> scatterlist[]
-> ib_map_mr_sg(). The rpcrdma_mr_seg intermediate is a relic
of when multiple registration strategies existed (FMR, physical,
FRWR). Only FRWR remains, so this indirection and the 6240-byte
rl_segments[260] array embedded in each rpcrdma_req serve no
purpose.
Introduce struct rpcrdma_xdr_cursor to track position within
an xdr_buf during iterative MR registration. Rewrite frwr_map to
populate scatterlist entries directly from the xdr_buf regions
(head kvec, page list, tail kvec). The boundary logic for
non-SG_GAPS devices is simpler because the xdr_buf structure
guarantees that page-region entries after the first start at
offset 0, and that head/tail kvecs are separate regions that
naturally break at MR boundaries.
Fix a pre-existing bug in rpcrdma_encode_write_list where the
write-pad statistics accumulator added mr->mr_length from the last
data MR rather than the write-pad MR. The refactored code uses
ep->re_write_pad_mr->mr_length.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
frwr_wp_create is the only caller of frwr_map outside the encode
path. It registers a single 4-byte write-pad region from a stack-
local rpcrdma_mr_seg. Inlining the registration logic directly
(sg_init_table + sg_set_page + ib_dma_map_sg + ib_map_mr_sg +
IOVA mangle + reg_wr setup) eliminates the coupling that would
otherwise complicate the removal of rpcrdma_mr_seg from frwr_map's
interface.
The inlined version adds a proper error-unwind ladder: on failure,
the DMA mapping (if established) is released, ep->re_write_pad_mr is
cleared, and the MR is returned to the transport free list. The old
frwr_map-based code relied on rpcrdma_mrs_destroy at teardown to
reclaim partially-initialized MRs.
This is a one-time setup path; duplicating ~20 lines is a reasonable
tradeoff for decoupling the write-pad registration from the data-
path MR registration.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
xprt_rdma_alloc_slot() and xprt_rdma_free_slot() lack serialization
between the buffer pool and the backlog queue. A buffer freed
after rpcrdma_buffer_get() finds the pool empty but before
rpc_sleep_on() places the task on the backlog is returned to the
pool with no waiter to wake, leaving the task stuck on the backlog
indefinitely.
After joining the backlog, re-check the pool and route any
recovered buffer through xprt_wake_up_backlog(), whose queue lock
serializes with concurrent wakeups and avoids double-assignment
of slots.
Because xprt_rdma_free_slot() does not hold reserve_lock, the
XPRT_CONGESTED double-check in xprt_throttle_congested() is
ineffective: a task can join the backlog through that path after
free_slot has already found it empty and cleared the bit. Avoid
this by using xprt_add_backlog_noncongested(), which queues the
task without setting XPRT_CONGESTED, so every allocation reaches
xprt_rdma_alloc_slot() and its post-sleep re-check.
Fixes: edb41e61a5 ("xprtrdma: Make rpc_rqst part of rpcrdma_req")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Commit a721035477 ("SUNRPC/xprt: async tasks mustn't block waiting
for memory") changed xprt_rdma_alloc_slot() to set tk_status to
-ENOMEM so that call_reserveresult() would sleep HZ/4 before
retrying. That rationale applies to xprt_dynamic_alloc_slot(),
where an immediate retry under memory pressure wastes CPU, but not
to the RDMA backlog path: a task woken from the backlog has a slot
waiting for it, so the 250 ms rpc_delay adds latency without
benefit.
This also aligns the code with the existing kernel-doc for
xprt_rdma_alloc_slot(), which already documented %-EAGAIN.
Fixes: a721035477 ("SUNRPC/xprt: async tasks mustn't block waiting for memory")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
rpcrdma_sendctx_get_locked() and rpcrdma_sendctx_put_locked() can
race in a way that leaves XPRT_WRITE_SPACE set permanently, blocking
all further sends on the transport:
get_locked put_locked (Send completion)
---------- --------------------------
read rb_sc_tail
-> ring full
advance rb_sc_tail
xprt_write_space():
test_bit(WRITE_SPACE)
-> not set, return
set_bit(WRITE_SPACE)
return NULL (-EAGAIN)
After the sender releases XPRT_LOCKED, the release path refuses to
wake the next task because XPRT_WRITE_SPACE is set. The sender
retries, finds XPRT_WRITE_SPACE still set, and sleeps on
xprt_sending. No further Send completions arrive to clear the flag
because no new Sends can be posted.
With nconnect, the stalled transport's share of congestion credits
are never returned, starving the remaining transports as well.
Fixes: 05eb06d866 ("xprtrdma: Fix occasional transport deadlock")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Please consider pulling these changes from the signed vfs-7.1-rc1.xattr tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCadjZCgAKCRCRxhvAZXjc
olWpAQCf//do9MtHmqTjgVfMIv18vw5woI8Bdx/X3m5S9e2D9gD/QddDnkFiVMmu
txsT+N8BGuW+jbAkYwax5LnUFGUTYgY=
=a4gm
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.1-rc1.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs xattr updates from Christian Brauner:
"This reworks the simple_xattr infrastructure and adds support for
user.* extended attributes on sockets.
The simple_xattr subsystem currently uses an rbtree protected by a
reader-writer spinlock. This series replaces the rbtree with an
rhashtable giving O(1) average-case lookup with RCU-based lockless
reads. This sped up concurrent access patterns on tmpfs quite a bit
and it's an overall easy enough conversion to do and gets rid or
rwlock_t.
The conversion is done incrementally: a new rhashtable path is added
alongside the existing rbtree, consumers are migrated one at a time
(shmem, kernfs, pidfs), and then the rbtree code is removed. All three
consumers switch from embedded structs to pointer-based lazy
allocation so the rhashtable overhead is only paid for inodes that
actually use xattrs.
With this infrastructure in place the series adds support for user.*
xattrs on sockets. Path-based AF_UNIX sockets inherit xattr support
from the underlying filesystem (e.g. tmpfs) but sockets in sockfs -
that is everything created via socket() including abstract namespace
AF_UNIX sockets - had no xattr support at all.
The xattr_permission() checks are reworked to allow user.* xattrs on
S_IFSOCK inodes. Sockfs sockets get per-inode limits of 128 xattrs and
128KB total value size matching the limits already in use for kernfs.
The practical motivation comes from several directions. systemd and
GNOME are expanding their use of Varlink as an IPC mechanism.
For D-Bus there are tools like dbus-monitor that can observe IPC
traffic across the system but this only works because D-Bus has a
central broker.
For Varlink there is no broker and there is currently no way to
identify which sockets speak Varlink. With user.* xattrs on sockets a
service can label its socket with the IPC protocol it speaks (e.g.,
user.varlink=1) and an eBPF program can then selectively capture
traffic on those sockets. Enumerating bound sockets via netlink
combined with these xattr labels gives a way to discover all Varlink
IPC entrypoints for debugging and introspection.
Similarly, systemd-journald wants to use xattrs on the /dev/log socket
for protocol negotiation to indicate whether RFC 5424 structured
syslog is supported or whether only the legacy RFC 3164 format should
be used.
In containers these labels are particularly useful as high-privilege
or more complicated solutions for socket identification aren't
available.
The series comes with comprehensive selftests covering path-based
AF_UNIX sockets, sockfs socket operations, per-inode limit
enforcement, and xattr operations across multiple address families
(AF_INET, AF_INET6, AF_NETLINK, AF_PACKET)"
* tag 'vfs-7.1-rc1.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests/xattr: test xattrs on various socket families
selftests/xattr: sockfs socket xattr tests
selftests/xattr: path-based AF_UNIX socket xattr tests
xattr: support extended attributes on sockets
xattr,net: support limited amount of extended attributes on sockfs sockets
xattr: move user limits for xattrs to generic infra
xattr: switch xattr_permission() to switch statement
xattr: add xattr_permission_error()
xattr: remove rbtree-based simple_xattr infrastructure
pidfs: adapt to rhashtable-based simple_xattrs
kernfs: adapt to rhashtable-based simple_xattrs with lazy allocation
shmem: adapt to rhashtable-based simple_xattrs with lazy allocation
xattr: add rhashtable-based simple_xattr infrastructure
xattr: add rcu_head and rhash_head to struct simple_xattr
Commit under Fixes moved recomputing the window clamp to
tcp_measure_rcv_mss() (when scaling_ratio changes).
I suspect it missed the fact that we don't recompute the clamp
when rcvbuf is set. Until scaling_ratio changes we are
stuck with the old window clamp which may be based on
the small initial buffer. scaling_ratio may never change.
Inspired by Eric's recent commit d1361840f8 ("tcp: fix
SO_RCVLOWAT and RCVBUF autotuning") plumb the user action
thru to TCP and have it update the clamp.
A smaller fix would be to just have tcp_rcvbuf_grow()
adjust the clamp even if SOCK_RCVBUF_LOCK is set.
But IIUC this is what we were trying to get away from
in the first place.
Fixes: a2cbb16039 ("tcp: Update window clamping condition")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumaze@google.com>
Link: https://patch.msgid.link/20260408001438.129165-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
hci_conn lookup and field access must be covered by hdev lock in
hci_user_passkey_notify_evt() and hci_keypress_notify_evt(), otherwise
the connection can be freed concurrently.
Extend the hci_dev_lock critical section to cover all conn usage in both
handlers.
Keep the existing keypress notification behavior unchanged by routing
the early exits through a common unlock path.
Fixes: 92a25256f1 ("Bluetooth: mgmt: Implement support for passkey notification")
Cc: stable@vger.kernel.org
Signed-off-by: Shuvam Pandey <shuvampandey1@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
copy_struct_from_sockptr() fill 'buffer' in
sco_sock_setsockopt() with zeros, so there's no
real problem.
But it actually looks strange to do this,
without checking all of codecs->codecs[0]
really comes from userspace:
sco_pi(sk)->codec = codecs->codecs[0];
As only optlen < sizeof(struct bt_codecs) is checked
and codecs->num_codecs is not checked against != 1,
but only <= 1, and the space for the additional struct bt_codec
is not checked.
Note I don't understand bluetooth and I didn't do any runtime
tests with this! I just found it when debugging a problem
in copy_struct_from_sockptr().
I just added this to check the size is as expected:
BUILD_BUG_ON(struct_size(codecs, codecs, 0) != 1);
BUILD_BUG_ON(struct_size(codecs, codecs, 1) != 8);
And made sure it still compiles using this:
make CF=-D__CHECK_ENDIAN__ W=1ce C=1 net/bluetooth/sco.o
Fixes: 3e643e4efa ("Bluetooth: Improve setsockopt() handling of malformed user input")
Cc: Michal Luczaj <mhal@rbox.co>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: David Wei <dw@davidwei.uk>
Cc: linux-bluetooth@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_ecred_reconf_rsp() calls l2cap_chan_del() without holding
l2cap_chan_lock(). Every other l2cap_chan_del() caller in the file
acquires the lock first. A remote BLE device can send a crafted
L2CAP ECRED reconfiguration response to corrupt the channel list
while another thread is iterating it.
Add l2cap_chan_hold() and l2cap_chan_lock() before l2cap_chan_del(),
and l2cap_chan_unlock() and l2cap_chan_put() after, matching the
pattern used in l2cap_ecred_conn_rsp() and l2cap_conn_del().
Fixes: 15f02b9105 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Dudu Lu <phx0fer@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When protocol sets HCI_PROTO_DEFER, hci_conn_request_evt() calls
hci_connect_cfm(conn) without hdev->lock. Generally hci_connect_cfm()
assumes it is held, and if conn is deleted concurrently -> UAF.
Only SCO and ISO set HCI_PROTO_DEFER and only for defer setup listen,
and HCI_EV_CONN_REQUEST is not generated for ISO. In the non-deferred
listening socket code paths, hci_connect_cfm(conn) is called with
hdev->lock held.
Fix by holding the lock.
Fixes: 70c4642563 ("Bluetooth: Refactor connection request handling")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_cmd_sync_run_once() needs to indicate whether a queue item was
added, so caller can know if callbacks are called, so it can avoid
leaking resources.
Change the function to return -EEXIST if queue item already exists.
Modify all callsites vs. the changes. The only callsite is
hci_abort_conn().
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bpf_prog_test_run_skb() calls eth_type_trans() first and then uses
skb->protocol to initialize sk family and address fields for the test
run.
For IPv4 and IPv6 packets, it may access ip_hdr(skb) or ipv6_hdr(skb)
even when the provided test input only contains an Ethernet header.
Reject the input earlier if the Ethernet frame carries IPv4/IPv6
EtherType but the L3 header is too short.
Fold the IPv4/IPv6 header length checks into the existing protocol
switch and return -EINVAL before accessing the network headers.
Fixes: fa5cb548ce ("bpf: Setup socket family and addresses in bpf_prog_test_run_skb")
Reported-by: syzbot+619b9ef527f510a57cfc@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=619b9ef527f510a57cfc
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Link: https://lore.kernel.org/r/20260408034623.180320-2-sun.jian.kdev@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With -fprofile-update=atomic in global CFLAGS_GCOV, GCC still cannot
constant-fold the skb_ext_total_length() loop when it is inlined into a
profiled caller. The existing __no_profile on skb_ext_total_length()
itself is insufficient because after __always_inline expansion the code
resides in the caller's body, which still carries GCOV instrumentation.
Mark skb_extensions_init() with __no_profile so the BUILD_BUG_ON checks
can be evaluated at compile time. Also mark it noinline to prevent the
compiler from inlining it into skb_init() (which lacks __no_profile),
which would re-expose the function body to GCOV instrumentation.
Add __init since skb_extensions_init() is only called from __init
skb_init(). Previously it was implicitly inlined into the .init.text
section; with noinline it would otherwise remain in permanent .text,
wasting memory after boot.
Build-tested with both CONFIG_GCOV_PROFILE_ALL=y and
CONFIG_KCOV_INSTRUMENT_ALL=y.
Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com>
Link: https://patch.msgid.link/20260410162150.3105738-3-khorenko@virtuozzo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When CONFIG_GCOV_PROFILE_ALL=y is enabled, the kernel fails to build:
In file included from <command-line>:
In function 'skb_extensions_init',
inlined from 'skb_init' at net/core/skbuff.c:5214:2:
././include/linux/compiler_types.h:706:45: error: call to
'__compiletime_assert_1490' declared with attribute error:
BUILD_BUG_ON failed: skb_ext_total_length() > 255
CONFIG_GCOV_PROFILE_ALL adds -fprofile-arcs -ftest-coverage
-fno-tree-loop-im to CFLAGS globally. GCC inserts branch profiling
counters into the skb_ext_total_length() loop and, combined with
-fno-tree-loop-im (which disables loop invariant motion), cannot
constant-fold the result.
BUILD_BUG_ON requires a compile-time constant and fails.
The issue manifests in kernels with 5+ SKB extension types enabled
(e.g., after addition of SKB_EXT_CAN, SKB_EXT_PSP). With 4 extensions
GCC can still unroll and fold the loop despite GCOV instrumentation;
with 5+ it gives up.
Mark skb_ext_total_length() with __no_profile to prevent GCOV from
inserting counters into this function. Without counters the loop is
"clean" and GCC can constant-fold it even with -fno-tree-loop-im active.
This allows BUILD_BUG_ON to work correctly while keeping GCOV profiling
for the rest of the kernel.
This also removes the CONFIG_KCOV_INSTRUMENT_ALL preprocessor guard
introduced by d6e5794b06. That guard was added as a precaution because
KCOV instrumentation was also suspected of inhibiting constant folding.
However, KCOV uses -fsanitize-coverage=trace-pc, which inserts
lightweight trace callbacks that do not interfere with GCC's constant
folding or loop optimization passes. Only GCOV's -fprofile-arcs combined
with -fno-tree-loop-im actually prevents the compiler from evaluating
the loop at compile time. The guard is therefore unnecessary and can be
safely removed.
Fixes: 96ea3a1e2d ("can: add CAN skb extension infrastructure")
Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com>
Reviewed-by: Thomas Weissschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20260410162150.3105738-2-khorenko@virtuozzo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In vsock_update_buffer_size(), the buffer size was being clamped to the
maximum first, and then to the minimum. If a user sets a minimum buffer
size larger than the maximum, the minimum check overrides the maximum
check, inverting the constraint.
This breaks the intended socket memory boundaries by allowing the
vsk->buffer_size to grow beyond the configured vsk->buffer_max_size.
Fix this by checking the minimum first, and then the maximum. This
ensures the buffer size never exceeds the buffer_max_size.
Fixes: b9f2b0ffde ("vsock: handle buffer_size sockopts in the core")
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Norbert Szetei <norbert@doyensec.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/180118C5-8BCF-4A63-A305-4EE53A34AB9C@doyensec.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk_filter_trim_cap() will soon return the reason by value,
do the same for tcp_filter().
Note:
tcp_filter() is no longer inlined. Following patch will inline it again.
$ scripts/bloat-o-meter -t vmlinux.4 vmlinux.5
add/remove: 2/0 grow/shrink: 0/2 up/down: 186/-43 (143)
Function old new delta
tcp_filter - 154 +154
__pfx_tcp_filter - 32 +32
tcp_v4_rcv 3152 3143 -9
tcp_v6_rcv 3169 3135 -34
Total: Before=29722640, After=29722783, chg +0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260409145625.2306224-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk_filter_trim_cap will soon return the reason by value,
do the same for sk_filter_reason().
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-21 (-21)
Function old new delta
sock_queue_rcv_skb_reason 128 126 -2
tun_net_xmit 1146 1127 -19
Total: Before=29722661, After=29722640, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260409145625.2306224-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk_filter_trim_cap() will soon return the drop reason by value.
Make sure *reason is cleared when no error is returned,
to ease this conversion.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-7 (-7)
Function old new delta
sk_filter_trim_cap 889 882 -7
Total: Before=29722668, After=29722661, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260409145625.2306224-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rds_ib_laddr_check() creates a CM_ID and attempts to bind the address
in question to it. This in order to qualify the allegedly local
address as a usable IB/RoCE address.
In the field, ExaWatcher runs rds-ping to all ports in the fabric from
all local ports. This using all active ToS'es. In a full rack system,
we have 14 cell servers and eight db servers. Typically, 6 ToS'es are
used. This implies 528 rds-ping invocations per ExaWatcher's "RDSinfo"
interval.
Adding to this, each rds-ping invocation creates eight sockets and
binds the local address to them:
socket(AF_RDS, SOCK_SEQPACKET, 0) = 3
bind(3, {sa_family=AF_INET, sin_port=htons(0),
sin_addr=inet_addr("192.168.36.2")}, 16) = 0
socket(AF_RDS, SOCK_SEQPACKET, 0) = 4
bind(4, {sa_family=AF_INET, sin_port=htons(0),
sin_addr=inet_addr("192.168.36.2")}, 16) = 0
socket(AF_RDS, SOCK_SEQPACKET, 0) = 5
bind(5, {sa_family=AF_INET, sin_port=htons(0),
sin_addr=inet_addr("192.168.36.2")}, 16) = 0
socket(AF_RDS, SOCK_SEQPACKET, 0) = 6
bind(6, {sa_family=AF_INET, sin_port=htons(0),
sin_addr=inet_addr("192.168.36.2")}, 16) = 0
socket(AF_RDS, SOCK_SEQPACKET, 0) = 7
bind(7, {sa_family=AF_INET, sin_port=htons(0),
sin_addr=inet_addr("192.168.36.2")}, 16) = 0
socket(AF_RDS, SOCK_SEQPACKET, 0) = 8
bind(8, {sa_family=AF_INET, sin_port=htons(0),
sin_addr=inet_addr("192.168.36.2")}, 16) = 0
socket(AF_RDS, SOCK_SEQPACKET, 0) = 9
bind(9, {sa_family=AF_INET, sin_port=htons(0),
sin_addr=inet_addr("192.168.36.2")}, 16) = 0
socket(AF_RDS, SOCK_SEQPACKET, 0) = 10
bind(10, {sa_family=AF_INET, sin_port=htons(0),
sin_addr=inet_addr("192.168.36.2")}, 16) = 0
So, at every interval ExaWatcher executes rds-ping's, 4224 CM_IDs are
allocated, considering this full-rack system. After the a CM_ID has
been allocated, rdma_bind_addr() is called, with the port number being
zero. This implies that the CMA will attempt to search for an un-used
ephemeral port. Simplified, the algorithm is to start at a random
position in the available port space, and then if needed, iterate
until an un-used port is found.
The book-keeping of used ports uses the idr system, which again uses
slab to allocate new struct idr_layer's. The size is 2092 bytes and
slab tries to reduce the wasted space. Hence, it chooses an order:3
allocation, for which 15 idr_layer structs will fit and only 1388
bytes are wasted per the 32KiB order:3 chunk.
Although this order:3 allocation seems like a good space/speed
trade-off, it does not resonate well with how it used by the CMA. The
combination of the randomized starting point in the port space (which
has close to zero spatial locality) and the close proximity in time of
the 4224 invocations of the rds-ping's, creates a memory hog for
order:3 allocations.
These costly allocations may need reclaims and/or compaction. At
worst, they may fail and produce a stack trace such as (from uek4):
[<ffffffff811a72d5>] __inc_zone_page_state+0x35/0x40
[<ffffffff811c2e97>] page_add_file_rmap+0x57/0x60
[<ffffffffa37ca1df>] remove_migration_pte+0x3f/0x3c0 [ksplice_6cn872bt_vmlinux_new]
[<ffffffff811c3de8>] rmap_walk+0xd8/0x340
[<ffffffff811e8860>] remove_migration_ptes+0x40/0x50
[<ffffffff811ea83c>] migrate_pages+0x3ec/0x890
[<ffffffff811afa0d>] compact_zone+0x32d/0x9a0
[<ffffffff811b00ed>] compact_zone_order+0x6d/0x90
[<ffffffff811b03b2>] try_to_compact_pages+0x102/0x270
[<ffffffff81190e56>] __alloc_pages_direct_compact+0x46/0x100
[<ffffffff8119165b>] __alloc_pages_nodemask+0x74b/0xaa0
[<ffffffff811d8411>] alloc_pages_current+0x91/0x110
[<ffffffff811e3b0b>] new_slab+0x38b/0x480
[<ffffffffa41323c7>] __slab_alloc+0x3b7/0x4a0 [ksplice_s0dk66a8_vmlinux_new]
[<ffffffff811e42ab>] kmem_cache_alloc+0x1fb/0x250
[<ffffffff8131fdd6>] idr_layer_alloc+0x36/0x90
[<ffffffff8132029c>] idr_get_empty_slot+0x28c/0x3d0
[<ffffffff813204ad>] idr_alloc+0x4d/0xf0
[<ffffffffa051727d>] cma_alloc_port+0x4d/0xa0 [rdma_cm]
[<ffffffffa0517cbe>] rdma_bind_addr+0x2ae/0x5b0 [rdma_cm]
[<ffffffffa09d8083>] rds_ib_laddr_check+0x83/0x2c0 [ksplice_6l2xst5i_rds_rdma_new]
[<ffffffffa05f892b>] rds_trans_get_preferred+0x5b/0xa0 [rds]
[<ffffffffa05f09f2>] rds_bind+0x212/0x280 [rds]
[<ffffffff815b4016>] SYSC_bind+0xe6/0x120
[<ffffffff815b4d3e>] SyS_bind+0xe/0x10
[<ffffffff816b031a>] system_call_fastpath+0x18/0xd4
To avoid these excessive calls to rdma_bind_addr(), we optimize
rds_ib_laddr_check() by simply checking if the address in question has
been used before. The rds_rdma module keeps track of addresses
associated with IB devices, and the function rds_ib_get_device() is
used to determine if the address already has been qualified as a valid
local address. If not found, we call the legacy rds_ib_laddr_check(),
now renamed to rds_ib_laddr_check_cm().
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com>
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260408080420.540032-2-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All five ROSE state machines (states 1-5) handle ROSE_CLEAR_REQUEST
by reading the cause and diagnostic bytes directly from skb->data[3]
and skb->data[4] without verifying that the frame is long enough:
rose_disconnect(sk, ..., skb->data[3], skb->data[4]);
The entry-point check in rose_route_frame() only enforces
ROSE_MIN_LEN (3 bytes), so a remote peer on a ROSE network can
send a syntactically valid but truncated CLEAR_REQUEST (3 or 4
bytes) while a connection is open in any state. Processing such a
frame causes a one- or two-byte out-of-bounds read past the skb
data, leaking uninitialized heap content as the cause/diagnostic
values returned to user space via getsockopt(ROSE_GETCAUSE).
Add a single length check at the rose_process_rx_frame() dispatch
point, before any state machine is entered, to drop frames that
carry the CLEAR_REQUEST type code but are too short to contain the
required cause and diagnostic fields.
Signed-off-by: Mashiro Chen <mashiro.chen@mailbox.org>
Link: https://patch.msgid.link/20260408172551.281486-1-mashiro.chen@mailbox.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GRE is silently dropping packets without updating statistics.
In case of drop, increment rx_dropped counter to provide visibility into
packet loss. For the case where no GRE protocol handler is registered,
use rx_nohandler.
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20260409090945.1542440-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a BPF sock_ops program accesses ctx fields with dst_reg == src_reg,
the SOCK_OPS_GET_SK() and SOCK_OPS_GET_FIELD() macros fail to zero the
destination register in the !fullsock / !locked_tcp_sock path.
Both macros borrow a temporary register to check is_fullsock /
is_locked_tcp_sock when dst_reg == src_reg, because dst_reg holds the
ctx pointer. When the check is false (e.g., TCP_NEW_SYN_RECV state with
a request_sock), dst_reg should be zeroed but is not, leaving the stale
ctx pointer:
- SOCK_OPS_GET_SK: dst_reg retains the ctx pointer, passes NULL checks
as PTR_TO_SOCKET_OR_NULL, and can be used as a bogus socket pointer,
leading to stack-out-of-bounds access in helpers like
bpf_skc_to_tcp6_sock().
- SOCK_OPS_GET_FIELD: dst_reg retains the ctx pointer which the
verifier believes is a SCALAR_VALUE, leaking a kernel pointer.
Fix both macros by:
- Changing JMP_A(1) to JMP_A(2) in the fullsock path to skip the
added instruction.
- Adding BPF_MOV64_IMM(si->dst_reg, 0) after the temp register
restore in the !fullsock path, placed after the restore because
dst_reg == src_reg means we need src_reg intact to read ctx->temp.
Fixes: fd09af0107 ("bpf: sock_ops ctx access may stomp registers in corner case")
Fixes: 84f44df664 ("bpf: sock_ops sk access may stomp registers when dst_reg = src_reg")
Reported-by: Quan Sun <2022090917019@std.uestc.edu.cn>
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Reported-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Closes: https://lore.kernel.org/bpf/6fe1243e-149b-4d3b-99c7-fcc9e2f75787@std.uestc.edu.cn/T/#u
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260407022720.162151-2-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The NFC-A anti-collision cascade in digital_in_recv_sdd_res() appends 3
or 4 bytes to target->nfcid1 on each round, but the number of cascade
rounds is controlled entirely by the peer device. The peer sets the
cascade tag in the SDD_RES (deciding 3 vs 4 bytes) and the
cascade-incomplete bit in the SEL_RES (deciding whether another round
follows).
ISO 14443-3 limits NFC-A to three cascade levels and target->nfcid1 is
sized accordingly (NFC_NFCID1_MAXSIZE = 10), but nothing in the driver
actually enforces this. This means a malicious peer can keep the
cascade running, writing past the heap-allocated nfc_target with each
round.
Fix this by rejecting the response when the accumulated UID would exceed
the buffer.
Commit e329e71013 ("NFC: nci: Bounds check struct nfc_target arrays")
fixed similar missing checks against the same field on the NCI path.
Cc: Simon Horman <horms@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Thierry Escande <thierry.escande@linux.intel.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Fixes: 2c66daecc4 ("NFC Digital: Add NFC-A technology support")
Cc: stable <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026040913-figure-seducing-bd3f@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The netlink attribute length field nla_len is a __u16, which can only
represent values up to 65535 bytes. NICs with a large number of
statistics strings (e.g. mlx5_core with thousands of ETH_SS_STATS
entries) can produce a ETHTOOL_A_STRINGSET_STRINGS nest that exceeds
this limit.
When nla_nest_end() writes the actual nest size back to nla_len, the
value is silently truncated. This results in a corrupted netlink message
being sent to userspace: the parser reads a wrong (truncated) attribute
length and misaligns all subsequent attribute boundaries, causing decode
errors.
Fix this by using the new helper nla_nest_end_safe and error out if
the size exceeds U16_MAX.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20260408-b4-ynl_ethtool-v2-5-7623a5e8f70b@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In nfc_llcp_recv_hdlc() and nfc_llcp_recv_disc(), when the socket
state is LLCP_CLOSED, the code correctly calls release_sock() and
nfc_llcp_sock_put() but fails to return. Execution falls through to
the remainder of the function, which calls release_sock() and
nfc_llcp_sock_put() again. This results in a double release_sock()
and a refcount underflow via double nfc_llcp_sock_put(), leading to
a use-after-free.
Add the missing return statements after the LLCP_CLOSED branches
in both functions to prevent the fall-through.
Fixes: d646960f79 ("NFC: Initial LLCP support")
Signed-off-by: Junxi Qian <qjx1298677004@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260408081006.3723-1-qjx1298677004@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add struct tso_dma_map to tso.h for tracking DMA addresses of mapped
GSO payload data and tso_dma_map_completion_state.
The tso_dma_map combines DMA mapping storage with iterator state, allowing
drivers to walk pre-mapped DMA regions linearly. Includes fields for
the DMA IOVA path (iova_state, iova_offset, total_len) and a fallback
per-region path (linear_dma, frags[], frag_idx, offset).
The tso_dma_map_completion_state makes the IOVA completion state opaque
for drivers. Drivers are expected to allocate this and use the added
helpers to update the completion state.
Adds skb_frag_phys() to skbuff.h, returning the physical address
of a paged fragment's data, which is used by the tso_dma_map helpers
introduced in this commit described below.
The added TSO DMA map helpers are:
tso_dma_map_init(): DMA-maps the linear payload region and all frags
upfront. Prefers the DMA IOVA API for a single contiguous mapping with
one IOTLB sync; falls back to per-region dma_map_phys() otherwise.
Returns 0 on success, cleans up partial mappings on failure.
tso_dma_map_cleanup(): Handles both IOVA and fallback teardown paths.
tso_dma_map_count(): counts how many descriptors the next N bytes of
payload will need. Returns 1 if IOVA is used since the mapping is
contiguous.
tso_dma_map_next(): yields the next (dma_addr, chunk_len) pair.
On the IOVA path, each segment is a single contiguous chunk. On the
fallback path, indicates when a chunk starts a new DMA mapping so the
driver can set dma_unmap_len on that descriptor for completion-time
unmapping.
tso_dma_map_completion_save(): updates the completion state. Drivers
will call this at xmit time.
tso_dma_map_complete(): tears down the mapping at completion time and
returns true if the IOVA path was used. If it was not used, this is a
no-op and returns false.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-2-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
`virtio_transport_send_pkt_info` gets all the transport information
from the parameter `t_ops`. There is no need to call
`virtio_transport_get_ops()`.
Remove it.
Acked-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260408-remove_parameter-v2-1-e00f31cf7a17@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 0f42e3f4fe ("net: skb: fix cross-cache free of
KFENCE-allocated skb head"), skb_kfree_head() always calls kfree()
and no longer uses end_offset to distinguish between skb_small_head_cache
and generic kmalloc caches.
Clean up the leftovers:
- Remove the unused end_offset parameter from skb_kfree_head() and
update all callers.
- Remove the SKB_SMALL_HEAD_HEADROOM guard in __skb_unclone_keeptruesize()
which was protecting the old skb_kfree_head() logic.
- Update the SKB_SMALL_HEAD_CACHE_SIZE comment to reflect that the
non-power-of-2 sizing is no longer used for free-path disambiguation.
No functional change.
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260410034736.297900-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=C/nr
-----END PGP SIGNATURE-----
Merge tag 'nf-next-26-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter: updates for net-next
1-3) IPVS updates from Julian Anastasov to enhance visibility into
IPVS internal state by exposing hash size, load factor etc and
allows userspace to tune the load factor used for resizing hash
tables.
4) reject empty/not nul terminated device names from xt_physdev.
This isn't a bug fix; existing code doesn't require a c-string.
But clean this up anyway because conceptually the interface name
definitely should be a c-string.
5) Switch nfnetlink to skb_mac_header helpers that didn't exist back
when this code was written. This gives us additional debug checks
but is not intended to change functionality.
6) Let the xt ttl/hoplimit match reject unknown operator modes.
This is a cleanup, the evaluation function simply returns false when
the mode is out of range. From Marino Dzalto.
7) xt_socket match should enable defrag after all other checks. This
bug is harmless, historically defrag could not be disabled either
except by rmmod.
8) remove UDP-Lite conntrack support, from Fernando Fernandez Mancera.
9) Avoid a couple -Wflex-array-member-not-at-end warnings in the old
xtables 32bit compat code, from Gustavo A. R. Silva.
10) nftables fwd expression should drop packets when their ttl/hl has
expired. This is a bug fix deferred, its not deemed important
enough for -rc8.
11) Add additional checks before assuming the mac header is an ethernet
header, from Zhengchuan Liang.
* tag 'nf-next-26-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: require Ethernet MAC header before using eth_hdr()
netfilter: nft_fwd_netdev: check ttl/hl before forwarding
netfilter: x_tables: Avoid a couple -Wflex-array-member-not-at-end warnings
netfilter: conntrack: remove UDP-Lite conntrack support
netfilter: xt_socket: enable defrag after all other checks
netfilter: xt_HL: add pr_fmt and checkentry validation
netfilter: nfnetlink: prefer skb_mac_header helpers
netfilter: x_physdev: reject empty or not-nul terminated device names
ipvs: add conn_lfactor and svc_lfactor sysctl vars
ipvs: add ip_vs_status info
ipvs: show the current conn_tab size to users
====================
Link: https://patch.msgid.link/20260410112352.23599-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When looking up a flow table in act_ct in tcf_ct_flow_table_get(),
rhashtable_lookup_fast() internally opens and closes an RCU read critical
section before returning ct_ft.
The tcf_ct_flow_table_cleanup_work() can complete before refcount_inc_not_zero()
is invoked on the returned ct_ft resulting in a UAF on the already freed ct_ft
object. This vulnerability can lead to privilege escalation.
Analysis from zdi-disclosures@trendmicro.com:
When initializing act_ct, tcf_ct_init() is called, which internally triggers
tcf_ct_flow_table_get().
static int tcf_ct_flow_table_get(struct net *net, struct tcf_ct_params *params)
{
struct zones_ht_key key = { .net = net, .zone = params->zone };
struct tcf_ct_flow_table *ct_ft;
int err = -ENOMEM;
mutex_lock(&zones_mutex);
ct_ft = rhashtable_lookup_fast(&zones_ht, &key, zones_params); // [1]
if (ct_ft && refcount_inc_not_zero(&ct_ft->ref)) // [2]
goto out_unlock;
...
}
static __always_inline void *rhashtable_lookup_fast(
struct rhashtable *ht, const void *key,
const struct rhashtable_params params)
{
void *obj;
rcu_read_lock();
obj = rhashtable_lookup(ht, key, params);
rcu_read_unlock();
return obj;
}
At [1], rhashtable_lookup_fast() looks up and returns the corresponding ct_ft
from zones_ht . The lookup is performed within an RCU read critical section
through rcu_read_lock() / rcu_read_unlock(), which prevents the object from
being freed. However, at the point of function return, rcu_read_unlock() has
already been called, and there is nothing preventing ct_ft from being freed
before reaching refcount_inc_not_zero(&ct_ft->ref) at [2]. This interval becomes
the race window, during which ct_ft can be freed.
Free Process:
tcf_ct_flow_table_put() is executed through the path tcf_ct_cleanup() call_rcu()
tcf_ct_params_free_rcu() tcf_ct_params_free() tcf_ct_flow_table_put().
static void tcf_ct_flow_table_put(struct tcf_ct_flow_table *ct_ft)
{
if (refcount_dec_and_test(&ct_ft->ref)) {
rhashtable_remove_fast(&zones_ht, &ct_ft->node, zones_params);
INIT_RCU_WORK(&ct_ft->rwork, tcf_ct_flow_table_cleanup_work); // [3]
queue_rcu_work(act_ct_wq, &ct_ft->rwork);
}
}
At [3], tcf_ct_flow_table_cleanup_work() is scheduled as RCU work
static void tcf_ct_flow_table_cleanup_work(struct work_struct *work)
{
struct tcf_ct_flow_table *ct_ft;
struct flow_block *block;
ct_ft = container_of(to_rcu_work(work), struct tcf_ct_flow_table,
rwork);
nf_flow_table_free(&ct_ft->nf_ft);
block = &ct_ft->nf_ft.flow_block;
down_write(&ct_ft->nf_ft.flow_block_lock);
WARN_ON(!list_empty(&block->cb_list));
up_write(&ct_ft->nf_ft.flow_block_lock);
kfree(ct_ft); // [4]
module_put(THIS_MODULE);
}
tcf_ct_flow_table_cleanup_work() frees ct_ft at [4]. When this function executes
between [1] and [2], UAF occurs.
This race condition has a very short race window, making it generally
difficult to trigger. Therefore, to trigger the vulnerability an msleep(100) was
inserted after[1]
Fixes: 138470a9b2 ("net/sched: act_ct: fix lockdep splat in tcf_ct_flow_table_get")
Reported-by: zdi-disclosures@trendmicro.com
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260410111627.46611-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iIkEABYKADEWIQSl+MghEFFAdY3pYJLMOmT6rpmt0gUCadfZ2RMcbWtsQHBlbmd1
dHJvbml4LmRlAAoJEMw6ZPquma3SgUkA/1a0V3slIJZKgZ+pCy9LtDmDJqkRcorz
mGP3R9SrEG6AAQDcifMLxoYuG4zBlQksaOgCWrav0HjcB28EPTdFyiMvAw==
=ZS47
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-7.0-20260409' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2026-04-09
Johan Hovold's patch fixes the a devres lifetime in the ucan driver.
The last patch is by Samuel Page and fixes a use-after-free in
raw_rcv() in the CAN_RAW protocol.
* tag 'linux-can-fixes-for-7.0-20260409' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: raw: fix ro->uniq use-after-free in raw_rcv()
can: ucan: fix devres lifetime
====================
Link: https://patch.msgid.link/20260409165942.588421-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- crypto: move Michael MIC code into wireless (only)
- mac80211:
- multi-link 4-addr support
- NAN data support (but no drivers yet)
- ath10k: DT quirk to make it work on some devices
- ath12k: IPQ5424 support
- rtw89: USB improvements for performance
-----BEGIN PGP SIGNATURE-----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=lf+O
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Final updates, notably:
- crypto: move Michael MIC code into wireless (only)
- mac80211:
- multi-link 4-addr support
- NAN data support (but no drivers yet)
- ath10k: DT quirk to make it work on some devices
- ath12k: IPQ5424 support
- rtw89: USB improvements for performance
* tag 'wireless-next-2026-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (124 commits)
wifi: cfg80211: Explicitly include <linux/export.h> in michael-mic.c
wifi: ath10k: Add device-tree quirk to skip host cap QMI requests
dt-bindings: wireless: ath10k: Add quirk to skip host cap QMI requests
crypto: Remove michael_mic from crypto_shash API
wifi: ipw2x00: Use michael_mic() from cfg80211
wifi: ath12k: Use michael_mic() from cfg80211
wifi: ath11k: Use michael_mic() from cfg80211
wifi: mac80211, cfg80211: Export michael_mic() and move it to cfg80211
wifi: ipw2x00: Rename michael_mic() to libipw_michael_mic()
wifi: libertas_tf: refactor endpoint lookup
wifi: libertas: refactor endpoint lookup
wifi: at76c50x: refactor endpoint lookup
wifi: ath12k: Enable IPQ5424 WiFi device support
wifi: ath12k: Add CE remap hardware parameters for IPQ5424
wifi: ath12k: add ath12k_hw_regs for IPQ5424
wifi: ath12k: add ath12k_hw_version_map entry for IPQ5424
wifi: ath12k: Add ath12k_hw_params for IPQ5424
dt-bindings: net: wireless: add ath12k wifi device IPQ5424
wifi: ath10k: fix station lookup failure during disconnect
wifi: ath12k: Create symlink for each radio in a wiphy
...
====================
Link: https://patch.msgid.link/20260410064703.735099-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Small improvement in SYN processing, to directly call
tcp_v6_init_seq_and_ts_off() or tcp_v4_init_seq_and_ts_off().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260410174950.745670-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename the leftover ifq_idx parameter naming to rxq_idx to be
consistent with the rest of the file and the header declaration.
Back then this was taken out of the queue leasing series given
the cleanup is independent. No functional change.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/netdev/20260131160237.07789674@kernel.org
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260410130602.552600-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dev_put() releases a reference which didn't have a tracker.
References without a tracker are accounted in the tracking
code as "no_tracker". We can't free the tracker and then
call dev_put(). The references themselves will be fine
but the tracking code will think it's a double-release:
refcount_t: decrement hit 0; leaking memory.
IOW commit under fixes confused dev_put() (release never tracked
reference) with __dev_put() (just release the reference, skipping
the reference tracking infra).
Since __netdev_put_lock() uses dev_put() we can't feed a previously
tracked netdev ref into it. Let's flip things around.
netdev_put(dev, NULL) is the same as dev_put(dev) so make
netdev_put_lock() the real function and have __netdev_put_lock()
feed it a NULL tracker for all the cases that were untracked.
Fixes: d04686d9bc ("net: Implement netdev_nl_queue_create_doit")
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20260410153600.1984522-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Part of a stack canary removal from tcp_v{4,6}_rcv().
Return a drop_reason instead of a boolean, so that we no longer
have to pass the address of a local variable.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-37 (-37)
Function old new delta
tcp_v6_rcv 3133 3129 -4
tcp_v4_rcv 3206 3202 -4
tcp_add_backlog 1281 1252 -29
Total: Before=25567186, After=25567149, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260409101147.1642967-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Network devices can have the same name within different network namespaces.
To help distinguish these devices, add the net_cookie value which can be
used to identify the netns.
Signed-off-by: Chris J Arges <carges@cloudflare.com>
Link: https://patch.msgid.link/20260408191056.1036330-1-carges@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
KEEP=1 is needed because we should respect the format of the packet as
the kernel sends it to us. Unless tx forward offloading is used, the
kernel is giving us the packet exactly as it should leave the specified
port on the wire. Until now this was not needed because the ports were
always functioning in a standalone mode in a VLAN-unaware way, so the
switch would not tag or untag frames anyway. But arguably it should have
been KEEP=1 all along.
Co-developed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260408-realtek_fixes-v1-2-915ff1404d56@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Like pointed out by Sashiko [1], since commit ed76f5edcc ("net: sched:
protect filter_chain list with filter_chain_lock mutex") TC filters are
added to a shared block and published to datapath before their ->change()
function is called. This is a problem for cls_fw: an invalid filter
created with the "old" method can still classify some packets before it
is destroyed by the validation logic added by Xiang.
Therefore, insisting with repeated runs of the following script:
# ip link add dev crash0 type dummy
# ip link set dev crash0 up
# mausezahn crash0 -c 100000 -P 10 \
> -A 4.3.2.1 -B 1.2.3.4 -t udp "dp=1234" -q &
# sleep 1
# tc qdisc add dev crash0 egress_block 1 clsact
# tc filter add block 1 protocol ip prio 1 matchall \
> action skbedit mark 65536 continue
# tc filter add block 1 protocol ip prio 2 fw
# ip link del dev crash0
can still make fw_classify() hit the WARN_ON() in [2]:
WARNING: ./include/net/pkt_cls.h:88 at fw_classify+0x244/0x250 [cls_fw], CPU#18: mausezahn/1399
Modules linked in: cls_fw(E) act_skbedit(E)
CPU: 18 UID: 0 PID: 1399 Comm: mausezahn Tainted: G E 7.0.0-rc6-virtme #17 PREEMPT(full)
Tainted: [E]=UNSIGNED_MODULE
Hardware name: Red Hat KVM, BIOS 1.16.3-2.el9 04/01/2014
RIP: 0010:fw_classify+0x244/0x250 [cls_fw]
Code: 5c 49 c7 45 00 00 00 00 00 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 5b b8 ff ff ff ff 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 90 <0f> 0b 90 eb a0 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffd1b7026bf8a8 EFLAGS: 00010202
RAX: ffff8c5ac9c60800 RBX: ffff8c5ac99322c0 RCX: 0000000000000004
RDX: 0000000000000001 RSI: ffff8c5b74d7a000 RDI: ffff8c5ac8284f40
RBP: ffffd1b7026bf8d0 R08: 0000000000000000 R09: ffffd1b7026bf9b0
R10: 00000000ffffffff R11: 0000000000000000 R12: 0000000000010000
R13: ffffd1b7026bf930 R14: ffff8c5ac8284f40 R15: 0000000000000000
FS: 00007fca40c37740(0000) GS:ffff8c5b74d7a000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fca40e822a0 CR3: 0000000005ca0001 CR4: 0000000000172ef0
Call Trace:
<TASK>
tcf_classify+0x17d/0x5c0
tc_run+0x9d/0x150
__dev_queue_xmit+0x2ab/0x14d0
ip_finish_output2+0x340/0x8f0
ip_output+0xa4/0x250
raw_sendmsg+0x147d/0x14b0
__sys_sendto+0x1cc/0x1f0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x126/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fca40e822ba
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
RSP: 002b:00007ffc248a42c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 000055ef233289d0 RCX: 00007fca40e822ba
RDX: 000000000000001e RSI: 000055ef23328c30 RDI: 0000000000000003
RBP: 000055ef233289d0 R08: 00007ffc248a42d0 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000001e
R13: 00000000000186a0 R14: 0000000000000000 R15: 00007fca41043000
</TASK>
irq event stamp: 1045778
hardirqs last enabled at (1045784): [<ffffffff864ec042>] __up_console_sem+0x52/0x60
hardirqs last disabled at (1045789): [<ffffffff864ec027>] __up_console_sem+0x37/0x60
softirqs last enabled at (1045426): [<ffffffff874d48c7>] __alloc_skb+0x207/0x260
softirqs last disabled at (1045434): [<ffffffff874fe8f8>] __dev_queue_xmit+0x78/0x14d0
Then, because of the value in the packet's mark, dereference on 'q->handle'
with NULL 'q' occurs:
BUG: kernel NULL pointer dereference, address: 0000000000000038
[...]
RIP: 0010:fw_classify+0x1fe/0x250 [cls_fw]
[...]
Skip "old-style" classification on shared blocks, so that the NULL
dereference is fixed and WARN_ON() is not hit anymore in the short
lifetime of invalid cls_fw "old-style" filters.
[1] https://sashiko.dev/#/patchset/20260331050217.504278-1-xmei5%40asu.edu
[2] https://elixir.bootlin.com/linux/v7.0-rc6/source/include/net/pkt_cls.h#L86
Fixes: faeea8bbf6 ("net/sched: cls_fw: fix NULL pointer dereference on shared blocks")
Fixes: ed76f5edcc ("net: sched: protect filter_chain list with filter_chain_lock mutex")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/e39cbd3103a337f1e515d186fe697b4459d24757.1775661704.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the check that rejects sleepable BPF programs from doing
BPF_ANY/BPF_EXIST updates on local storage. This restriction was added
in commit b00fa38a9c ("bpf: Enable non-atomic allocations in local
storage") because kzalloc(GFP_KERNEL) could sleep inside
local_storage->lock. This is no longer a concern: all local storage
allocations now use kmalloc_nolock() which never sleeps.
In addition, since kmalloc_nolock() only accepts __GFP_ACCOUNT,
__GFP_ZERO and __GFP_NO_OBJ_EXT, the gfp_flags parameter plumbing from
bpf_*_storage_get() to bpf_local_storage_update() becomes dead code.
Remove gfp_flags from bpf_selem_alloc(), bpf_local_storage_alloc() and
bpf_local_storage_update(). Drop the hidden 5th argument from
bpf_*_storage_get helpers, and remove the verifier patching that
injected GFP_KERNEL/GFP_ATOMIC into the fifth argument.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/r/20260411015419.114016-4-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Switch to kmalloc_nolock() universally in local storage. Socket local
storage didn't move to kmalloc_nolock() when BPF memory allocator was
replaced by it for performance reasons. Now that kfree_rcu() supports
freeing memory allocated by kmalloc_nolock(), we can move the remaining
local storages to use kmalloc_nolock() and cleanup the cluttered free
paths.
Use kfree() instead of kfree_nolock() in bpf_selem_free_trace_rcu() and
bpf_local_storage_free_trace_rcu(). Both callbacks run in process context
where spinning is allowed, so kfree_nolock() is unnecessary.
Benchmark:
./bench -p 1 local-storage-create --storage-type socket \
--batch-size {16,32,64}
The benchmark is a microbenchmark stress-testing how fast local storage
can be created. There is no measurable throughput change for socket local
storage after switching from kzalloc() to kmalloc_nolock().
Socket local storage
batch creation speed diff
--------------- ---- ------------------ ----
Baseline 16 433.9 ± 0.6 k/s
32 434.3 ± 1.4 k/s
64 434.2 ± 0.7 k/s
After 16 439.0 ± 1.9 k/s +1.2%
32 437.3 ± 2.0 k/s +0.7%
64 435.8 ± 2.5k/s +0.4%
Also worth noting that the baseline got a 5% throughput boost when sheaf
replaces percpu partial slab recently [0].
[0] https://lore.kernel.org/bpf/20260123-sheaves-for-all-v4-0-041323d506f7@suse.cz/
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/r/20260411015419.114016-3-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The bridge-stp usermode helper is currently restricted to the initial
network namespace, preventing userspace STP daemons (e.g. mstpd) from
operating on bridges in other network namespaces. Since commit
ff62198553 ("bridge: Only call /sbin/bridge-stp for the initial
network namespace"), bridges in non-init namespaces silently fall
back to kernel STP with no way to use userspace STP.
Add a new bridge attribute IFLA_BR_STP_MODE that allows explicit
per-bridge control over STP mode selection:
BR_STP_MODE_AUTO (default) - Existing behavior: invoke the
/sbin/bridge-stp helper in init_net only; fall back to kernel STP
if it fails or in non-init namespaces.
BR_STP_MODE_USER - Directly enable userspace STP (BR_USER_STP)
without invoking the helper. Works in any network namespace.
Userspace is responsible for ensuring an STP daemon manages the
bridge.
BR_STP_MODE_KERNEL - Directly enable kernel STP (BR_KERNEL_STP)
without invoking the helper.
The mode can only be changed while STP is disabled, or set to the
same value (-EBUSY otherwise). IFLA_BR_STP_MODE is processed before
IFLA_BR_STP_STATE in br_changelink(), so both can be set atomically
in a single netlink message. The mode can also be changed in the
same message that disables STP.
The stp_mode struct field is u8 since all possible values fit, while
NLA_U32 is used for the netlink attribute since it occupies the same
space in the netlink message as NLA_U8.
A new stp_helper_active boolean tracks whether the /sbin/bridge-stp
helper was invoked during br_stp_start(), so that br_stp_stop() only
calls the helper for stop when it was called for start. This avoids
calling the helper asymmetrically when stp_mode changes between
start and stop.
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Andy Roulin <aroulin@nvidia.com>
Link: https://patch.msgid.link/20260405205224.3163000-2-aroulin@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Please consider pulling these changes from the signed vfs-7.0-rc8.fixes tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCadjZCgAKCRCRxhvAZXjc
om/TAQDsAIxYiJ4hR7rNrKuyL+FP7kuN8WX9DmjU+45Pt/SZNwEA2pSH0y7osa2+
xRGkN0pPQTu6JIlx0rCXlY9PYnXCPQg=
=RHx5
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.0-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"The kernfs rbtree is keyed by (hash, ns, name) where the hash
is seeded with the raw namespace pointer via init_name_hash(ns).
The resulting hash values are exposed to userspace through
readdir seek positions, and the pointer-based ordering in
kernfs_name_compare() is observable through entry order.
Switch from raw pointers to ns_common::ns_id for both hashing
and comparison.
A preparatory commit first replaces all const void * namespace
parameters with const struct ns_common * throughout kernfs, sysfs,
and kobject so the code can access ns->ns_id. Also compare the
ns_id when hashes match in the rbtree to handle crafted collisions.
Also fix eventpoll RCU grace period issue and a cachefiles refcount
problem"
* tag 'vfs-7.0-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
kernfs: make directory seek namespace-aware
kernfs: use namespace id instead of pointer for hashing and comparison
kernfs: pass struct ns_common instead of const void * for namespace tags
eventpoll: defer struct eventpoll free to RCU grace period
cachefiles: fix incorrect dentry refcount in cachefiles_cull()
Core 6.0, Vol 3, Part A, 3.4.3:
"... If the payload size of any K-frame exceeds the receiver's MPS, the
receiver shall disconnect the channel..."
This fixes L2CAP/LE/CFC/BV-27-C (running together with 'l2test -r -P
0x0027 -V le_public -I 100').
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Christian Eggers <ceggers@arri.de>
Some controller firmwares (eg for MT7925) continuously send invalid ISO
packet, which result to "ISO unknown handle" error spam in logs. It's
not important to show all of them to the user.
Rate limit these ISO error messages, similarly as we do for SCO.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
`ip6t_eui64`, `xt_mac`, the `bitmap:ip,mac`, `hash:ip,mac`, and
`hash:mac` ipset types, and `nf_log_syslog` access `eth_hdr(skb)`
after either assuming that the skb is associated with an Ethernet
device or checking only that the `ETH_HLEN` bytes at
`skb_mac_header(skb)` lie between `skb->head` and `skb->data`.
Make these paths first verify that the skb is associated with an
Ethernet device, that the MAC header was set, and that it spans at
least a full Ethernet header before accessing `eth_hdr(skb)`.
Suggested-by: Florian Westphal <fw@strlen.de>
Tested-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Zhengchuan Liang <zcliangcn@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Florian Westphal <fw@strlen.de>
Drop packets if their ttl/hl is too small for forwarding.
Fixes: d32de98ea7 ("netfilter: nft_fwd_netdev: allow to forward packets via neighbour layer")
Signed-off-by: Florian Westphal <fw@strlen.de>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the TRAILING_OVERLAP() helper to fix the following warnings:
1 net/netfilter/x_tables.c:816:39: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
1 net/netfilter/x_tables.c:811:39: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
This helper creates a union between a flexible-array member (FAM)
and a set of members that would otherwise follow it. This overlays
the trailing members onto the FAM while preserving the original
memory layout.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
UDP-Lite (RFC 3828) socket support was recently retired from the core
networking stack. As a follow-up of that, drop the connection tracker
and NAT support for UDP-Lite in Netfilter.
This patch removes CONFIG_NF_CT_PROTO_UDPLITE and scrubs UDP-Lite
awareness from the conntrack core, NAT core, nft_ct, and ctnetlink.
Please note that stateless packet inspection, matching, ipsets or
logging support for IPPROTO_UDPLITE is preserved.
As conntrack no longer extracts UDP-Lite ports or tracks its L4 state,
when performing NAT the UDP-Lite checksum cannot be updated anymore.
That is an expected and acceptable consequence of removing UDP-Lite
conntrack module.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Originally this did not matter because defrag was enabled once per netns
and only disabled again on netns dismantle. When this got changed I should
have adjusted checkentry to not leave defrag enabled on error.
Fixes: de8c12110a ("netfilter: disable defrag once its no longer needed")
Signed-off-by: Florian Westphal <fw@strlen.de>
Add pr_fmt to prefix log messages with the module name for
easier debugging in dmesg.
Add checkentry functions for IPv4 (ttl_mt_check) and IPv6
(hl_mt6_check) to validate the match mode at rule registration
time, rejecting invalid modes with -EINVAL.
The evaluation function returns false in case the mode is
unknown, so this is a cleanup, not a bug fix.
Signed-off-by: Marino Dzalto <marino.dzalto@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reject names that lack a \0 character and reject the empty string as
well. iptables allows this but it fails to re-parse iptables-save output
that contain such rules.
Signed-off-by: Florian Westphal <fw@strlen.de>
Allow the default load factor for the connection and service tables
to be configured.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Add /proc/net/ip_vs_status to show current state of IPVS.
The motivation for this new /proc interface is to provide the output
for the users to help them decide when to tune the load factor for
hash tables, which is possible with the new sysctl knobs coming in
followup patch.
The output also includes information for the kthreads used for stats.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
As conn_tab is per-net, better to show the current hash table size
to users instead of the ip_vs_conn_tab_size (max).
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
The variable ret is assigned a value at all places where it is used;
There is no need to assign a value when it is initially defined.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://patch.msgid.link/20260408032051.3096449-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Observed at boot time:
CPU: 43 UID: 0 PID: 3595 Comm: (t-daemon) Not tainted 6.12.0 #1
Call Trace:
<TASK>
dump_stack_lvl+0x4e/0x70
pcpu_alloc_noprof.cold+0x1f/0x4b
fib_nh_common_init+0x4c/0x110
fib6_nh_init+0x387/0x740
ip6_route_info_create+0x46d/0x640
addrconf_f6i_alloc+0x13b/0x180
addrconf_permanent_addr+0xd0/0x220
addrconf_notify+0x93/0x540
notifier_call_chain+0x5a/0xd0
__dev_notify_flags+0x5c/0xf0
dev_change_flags+0x54/0x70
do_setlink+0x36c/0xce0
rtnl_setlink+0x11f/0x1d0
rtnetlink_rcv_msg+0x142/0x3f0
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x242/0x390
netlink_sendmsg+0x21b/0x470
__sys_sendto+0x1dc/0x1f0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x7d/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f5c3852f127
Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 80 3d 85 ef 0c 00 00 41 89 ca 74 10 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 71 c3 55 48 83 ec 30 44 89 4c 24 2c 4c 89 44
RSP: 002b:00007ffe86caf4c8 EFLAGS: 00000202 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000556c5cd93210 RCX: 00007f5c3852f127
RDX: 0000000000000020 RSI: 0000556c5cd938b0 RDI: 0000000000000003
RBP: 00007ffe86caf5a0 R08: 00007ffe86caf4e0 R09: 0000000000000080
R10: 0000000000000000 R11: 0000000000000202 R12: 0000556c5cd932d0
R13: 00000000021d05d1 R14: 00000000021d05d1 R15: 0000000000000001
IFA_F_PERMANENT addresses require the allocation of a bunch of percpu
pointers, currently in atomic scope.
Similar to commit 51454ea42c ("ipv6: fix locking issues with loops
over idev->addr_list"), move fixup_permanent_addr() outside the
&idev->lock scope, and do the allocations with GFP_KERNEL. With such
change fixup_permanent_addr() is invoked with the BH enabled, and the
ifp lock acquired there needs the BH variant.
Note that we don't need to acquire a reference to the permanent
addresses before releasing the mentioned write lock, because
addrconf_permanent_addr() runs under RTNL and ifa removal always happens
under RTNL, too.
Also the PERMANENT flag is constant in the relevant scope, as it can be
cleared only by inet6_addr_modify() under the RTNL lock.
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/46a7a030727e236af2dc7752994cd4f04f4a91d2.1775658924.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the typed random integer helpers instead of
get_random_bytes() when filling a single integer variable.
The helpers return the value directly, require no pointer
or size argument, and better express intent.
Skipped sites writing into __be16 (netdevsim) and __le64
(ceph) fields where a direct assignment would trigger
sparse endianness warnings.
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260407150758.5889-1-devnexen@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The netif_get_rx_queue_lease_locked() API hides the locking
and the descend onto the leased queue. Making the code
harder to follow (at least to me). Remove the API and open
code the descend a bit. Most of the code now looks like:
if (!leased)
return __helper(x);
hw_rxq = ..
netdev_lock(hw_rxq->dev);
ret = __helper(x);
netdev_unlock(hw_rxq->dev);
return ret;
Of course if we have more code paths that need the wrapping
we may need to revisit. For now, IMHO, having to know what
netif_get_rx_queue_lease_locked() does is not worth the 20LoC
it saves.
Link: https://patch.msgid.link/20260408151251.72bd2482@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
netkit: Support for io_uring zero-copy and AF_XDP
Containers use virtual netdevs to route traffic from a physical netdev
in the host namespace. They do not have access to the physical netdev
in the host and thus can't use memory providers or AF_XDP that require
reconfiguring/restarting queues in the physical netdev.
This patchset adds the concept of queue leasing to virtual netdevs that
allow containers to use memory providers and AF_XDP at native speed.
Leased queues are bound to a real queue in a physical netdev and act
as a proxy.
Memory providers and AF_XDP operations take an ifindex and queue id,
so containers would pass in an ifindex for a virtual netdev and a queue
id of a leased queue, which then gets proxied to the underlying real
queue.
We have implemented support for this concept in netkit and tested the
latter against Nvidia ConnectX-6 (mlx5) as well as Broadcom BCM957504
(bnxt_en) 100G NICs. For more details see the individual patches.
====================
Link: https://patch.msgid.link/20260402231031.447597-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a netdevice notifier in netkit to watch for NETDEV_UNREGISTER events.
If the target device is indeed NETREG_UNREGISTERING and previously leased
a queue to a netkit device, then collect the related netkit devices and
batch-unregister_netdevice_many() them.
If this were not done, then the netkit device would hold a reference on
the physical device preventing it from going away. However, in case of
both io_uring zero-copy as well as AF_XDP this situation is handled
gracefully and the allocated resources are torn down.
In the case where mentioned infra is used through netkit, the applications
have a reference on netkit, and netkit in turn holds a reference on the
physical device. In order to have netkit release the reference on the
physical device, we need such watcher to then unregister the netkit ones.
This is generally quite similar to the dependency handling in case of
tunnels (e.g. vxlan bound to a underlying netdev) where the tunnel device
gets removed along with the physical device.
# ip a
[...]
4: enp10s0f0np0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether e8:eb:d3:a3:43:f6 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.2/24 scope global enp10s0f0np0
valid_lft forever preferred_lft forever
[...]
8: nk@NONE: <BROADCAST,MULTICAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
[...]
# rmmod mlx5_ib
# rmmod mlx5_core
[...]
[ 309.261822] mlx5_core 0000:0a:00.0 mlx5_0: Port: 1 Link DOWN
[ 344.235236] mlx5_core 0000:0a:00.1: E-Switch: Unload vfs: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
[ 344.246948] mlx5_core 0000:0a:00.1: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
[ 344.463754] mlx5_core 0000:0a:00.1: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
[ 344.770155] mlx5_core 0000:0a:00.1: E-Switch: cleanup
[...]
# ip a
[...]
[ both enp10s0f0np0 and nk gone ]
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-13-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similarly to the netif_mp_{open,close}_rxq handling for leased queues, proxy
the xsk_{reg,clear}_pool_at_qid via netif_get_rx_queue_lease_locked such
that in case a virtual netdev picked a leased rxq, the request gets through
to the real rxq in the physical netdev. The proxying is only relevant for
queue_id < dev->real_num_rx_queues since right now it's only supported for
rxqs.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-10-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
xsk_rcv_check tests for inbound packets to see whether they match
the bound AF_XDP socket. Refactor the test into a small helper
xsk_dev_queue_valid and move the validation against xs->dev and
xs->queue_id there.
The fast-path case stays in place and allows for quick return in
xsk_dev_queue_valid. If it fails, the validation is extended to
check whether the AF_XDP socket is bound against a leased queue,
and if so, the test is redone.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-9-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend netdev_queue_get_dma_dev to return the physical device of the
real rxq for DMA in case the queue was leased. This allows memory
providers like io_uring zero-copy or devmem to bind to the physically
leased rxq via virtual devices such as netkit.
Signed-off-by: David Wei <dw@davidwei.uk>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-8-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a process in a container wants to setup a memory provider, it will
use the virtual netdev and a leased rxq, and call netif_mp_{open,close}_rxq
to try and restart the queue. At this point, proxy the queue restart on
the real rxq in the physical netdev.
For memory providers (io_uring zero-copy rx and devmem), it causes the
real rxq in the physical netdev to be filled from a memory provider that
has DMA mapped memory from a process within a container.
Signed-off-by: David Wei <dw@davidwei.uk>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-7-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net_mp_open_rxq is currently not used in the tree as all callers are
using __net_mp_open_rxq directly, and net_mp_close_rxq is only used
once while all other locations use __net_mp_close_rxq.
Consolidate into a single API, netif_mp_{open,close}_rxq, using the
netif_ prefix to indicate that the caller is responsible for locking.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-6-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to AF_XDP, do not allow queues in a physical netdev to be resized
by ethtool -L when they are leased. Cover channel resize paths (both
netlink and ioctl) to reject resizing when the queues would be affected.
Given we need to have different checks for RX vs TX, detangle the code into
a two-loop version rather than the range of new_combined + min(new_rx, new_tx)
to old_combined + max(old_rx, old_tx).
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-5-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Populate nested lease info to the queue-get response that returns the
ifindex, queue id with type and optionally netns id if the device
resides in a different netns.
Example with ynl client when using AF_XDP via queue leasing:
# ip a
[...]
4: enp10s0f0np0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 xdp/id:24 qdisc mq state UP group default qlen 1000
link/ether e8:eb:d3:a3:43:f6 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.2/24 scope global enp10s0f0np0
valid_lft forever preferred_lft forever
inet6 fe80::eaeb:d3ff:fea3:43f6/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
[...]
# ethtool -i enp10s0f0np0
driver: mlx5_core
[...]
# ynl --family netdev --output-json --do queue-get \
--json '{"ifindex": 4, "id": 15, "type": "rx"}'
{'id': 15,
'ifindex': 4,
'lease': {'ifindex': 8, 'netns-id': 0, 'queue': {'id': 1, 'type': 'rx'}},
'napi-id': 8227,
'type': 'rx',
'xsk': {}}
# ip netns list
foo (id: 0)
# ip netns exec foo ip a
[...]
8: nk@NONE: <BROADCAST,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
inet6 fe80::200:ff:fe00:0/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
[...]
# ip netns exec foo ethtool -i nk
driver: netkit
[...]
# ip netns exec foo ls /sys/class/net/nk/queues/
rx-0 rx-1 tx-0
# ip netns exec foo ynl --family netdev --output-json --do queue-get \
--json '{"ifindex": 8, "id": 1, "type": "rx"}'
{"id": 1, "type": "rx", "ifindex": 8, "xsk": {}}
Note that the caller of netdev_nl_queue_fill_one() holds the netdevice
lock. For the queue-get we do not lock both devices. When queues get
{un,}leased, both devices are locked, thus if __netif_get_rx_queue_lease()
returns a lease pointer, it points to a valid device. The netns-id is
fetched via peernet2id_alloc() similarly as done in OVS.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-4-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement netdev_nl_queue_create_doit which creates a new rx queue in a
virtual netdev and then leases it to a rx queue in a physical netdev.
Example with ynl client:
# ynl --family netdev --output-json --do queue-create \
--json '{"ifindex": 8, "type": "rx", "lease": {"ifindex": 4, "queue": {"type": "rx", "id": 15}}}'
{'id': 1}
Note that the netdevice locking order is always from the virtual to
the physical device.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-3-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a ynl netdev family operation called queue-create that creates a
new queue on a netdevice:
name: queue-create
attribute-set: queue
flags: [admin-perm]
do:
request:
attributes:
- ifindex
- type
- lease
reply: &queue-create-op
attributes:
- id
This is a generic operation such that it can be extended for various
use cases in future. Right now it is mandatory to specify ifindex,
the queue type which is enforced to rx and a lease. The newly created
queue id is returned to the caller.
A queue from a virtual device can have a lease which refers to another
queue from a physical device. This is useful for memory providers
and AF_XDP operations which take an ifindex and queue id to allow
applications to bind against virtual devices in containers. The lease
couples both queues together and allows to proxy the operations from
a virtual device in a container to the physical device.
In future, the nested lease attribute can be lifted and made optional
for other use-cases such as dynamic queue creation for physical
netdevs. The lack of lease and the specification of the physical
device as an ifindex will imply that we need a real queue to be
allocated. Similarly, the queue type enforcement to rx can then be
lifted as well to support tx.
An early implementation had only driver-specific integration [0], but
in order for other virtual devices to reuse, it makes sense to have
this as a generic API in core net.
For leasing queues, the virtual netdev must have real_num_rx_queues
less than num_rx_queues at the time of calling queue-create. The
queue-type must be rx as only rx queues are supported for leasing
for now. We also enforce that the queue-create ifindex must point
to a virtual device, and that the nested lease attribute's ifindex
must point to a physical device. The nested lease attribute set
contains a netns-id attribute which is optional and can specify a
netns-id relative to the caller's netns. It requires cap_net_admin
and if the netns-id attribute is not specified, the lease ifindex
will be retrieved from the current netns. Also, it is modeled as
an s32 type similarly as done elsewhere in the stack.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://bpfconf.ebpf.io/bpfconf2025/bpfconf2025_material/lsfmmbpf_2025_netkit_borkmann.pdf [0]
Link: https://patch.msgid.link/20260402231031.447597-2-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
raw_release() unregisters raw CAN receive filters via can_rx_unregister(),
but receiver deletion is deferred with call_rcu(). This leaves a window
where raw_rcv() may still be running in an RCU read-side critical section
after raw_release() frees ro->uniq, leading to a use-after-free of the
percpu uniq storage.
Move free_percpu(ro->uniq) out of raw_release() and into a raw-specific
socket destructor. can_rx_unregister() takes an extra reference to the
socket and only drops it from the RCU callback, so freeing uniq from
sk_destruct ensures the percpu area is not released until the relevant
callbacks have drained.
Fixes: 514ac99c64 ("can: fix multiple delivery of a single CAN frame for overlapping CAN filters")
Cc: stable@vger.kernel.org # v4.1+
Assisted-by: Bynario AI
Signed-off-by: Samuel Page <sam@bynar.io>
Link: https://patch.msgid.link/26ec626d-cae7-4418-9782-7198864d070c@bynar.io
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
[mkl: applied manually]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
kernfs has historically used const void * to pass around namespace tags
used for directory-level namespace filtering. The only current user of
this is sysfs network namespace tagging where struct net pointers are
cast to void *.
Replace all const void * namespace parameters with const struct
ns_common * throughout the kernfs, sysfs, and kobject namespace layers.
This includes the kobj_ns_type_operations callbacks, kobject_namespace(),
and all sysfs/kernfs APIs that accept or return namespace tags.
Passing struct ns_common is needed because various codepaths require
access to the underlying namespace. A struct ns_common can always be
converted back to the concrete namespace type (e.g., struct net) via
container_of() or to_ns_common() in the reverse direction.
This is a preparatory change for switching to ns_id-based directory
iteration to prevent a KASLR pointer leak through the current use of
raw namespace pointers as hash seeds and comparison keys.
Signed-off-by: Christian Brauner <brauner@kernel.org>
This happened to be included transitively via a long chain starting with
<linux/bitops.h>, but it's less fragile to include it explicitly.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260409030333.13024-1-ebiggers@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Allow filtering the resource dump to device-level or port-level
resources using the 'scope' option.
Example - dump only device-level resources:
$ devlink resource show scope dev
pci/0000:03:00.0:
name max_local_SFs size 128 unit entry dpipe_tables none
name max_external_SFs size 128 unit entry dpipe_tables none
pci/0000:03:00.1:
name max_local_SFs size 128 unit entry dpipe_tables none
name max_external_SFs size 128 unit entry dpipe_tables none
Example - dump only port-level resources:
$ devlink resource show scope port
pci/0000:03:00.0/196608:
name max_SFs size 128 unit entry dpipe_tables none
pci/0000:03:00.0/196609:
name max_SFs size 128 unit entry dpipe_tables none
pci/0000:03:00.1/196708:
name max_SFs size 128 unit entry dpipe_tables none
pci/0000:03:00.1/196709:
name max_SFs size 128 unit entry dpipe_tables none
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260407194107.148063-11-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow querying devlink resources per-port via the resource-dump doit
handler. When a port-index attribute is provided, only that port's
resources are returned. When no port-index is given, only device-level
resources are returned, preserving backward compatibility.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260407194107.148063-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow querying devlink resources per-port via the resource-dump dumpit
handler. Both device-level and all ports resources are included in the
reply.
For example:
$ devlink resource show
pci/0000:03:00.0:
name local_max_SFs size 508 unit entry
name external_max_SFs size 508 unit entry
pci/0000:03:00.0/196608:
name max_SFs size 20 unit entry
pci/0000:03:00.1:
name local_max_SFs size 508 unit entry
name external_max_SFs size 508 unit entry
pci/0000:03:00.1/262144:
name max_SFs size 20 unit entry
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260407194107.148063-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add dumpit handler for resource-dump command to iterate over all devlink
devices and show their resources.
$ devlink resource show
pci/0000:08:00.0:
name local_max_SFs size 508 unit entry
name external_max_SFs size 508 unit entry
pci/0000:08:00.1:
name local_max_SFs size 508 unit entry
name external_max_SFs size 508 unit entry
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260407194107.148063-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current devlink resource infrastructure supports only device-level
resources. Some hardware resources are associated with specific ports
rather than the entire device, and today we have no way to show resource
per-port.
Add support for registering resources at the port level.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260407194107.148063-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the resource functions take devlink pointer as parameter
and take the resource list from there.
Allow resource functions to work with other resource lists that will
be added in next patches and not only with the devlink's resource list.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260407194107.148063-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The devlink_fmsg_dump_skb function was incorrectly using the socket
type (sk->sk_type) instead of the socket family (sk->sk_family)
when filling the "family" field in the fast message dump.
This patch fixes this to properly display the socket family.
Fixes: 3dbfde7f6b ("devlink: add devlink_fmsg_dump_skb() function")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Link: https://patch.msgid.link/20260407022730.2393-1-lirongqing@baidu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Exact UNIX diag lookups hold a reference to the socket, but not to
u->path. Meanwhile, unix_release_sock() clears u->path under
unix_state_lock() and drops the path reference after unlocking.
Read the inode and device numbers for UNIX_DIAG_VFS while holding
unix_state_lock(), then emit the netlink attribute after dropping the
lock.
This keeps the VFS data stable while the reply is being built.
Fixes: 5f7b056946 ("unix_diag: Unix inode info NLA")
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Tested-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260407080015.1744197-1-n05ec@lzu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is the MPTCP counter-part of commit ea33537d82 ("tcp: add receive
queue awareness in tcp_rcv_space_adjust()").
Prior to this commit:
ESTAB 33165568 0 192.168.255.2:5201 192.168.255.1:53380 \
skmem:(r33076416,rb33554432,t0,tb91136,f448,w0,o0,bl0,d0)
After:
ESTAB 3279168 0 192.168.255.2:5201 192.168.255.1]:53042 \
skmem:(r3190912,rb3719956,t0,tb91136,f1536,w0,o0,bl0,d0)
Same throughput.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260407-net-next-mptcp-reduce-rbuf-v2-2-0d1d135bf6f6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current MPTCP-level RTT estimator has several issues. On high speed
links, the MPTCP-level receive buffer auto-tuning happens with a
frequency well above the TCP-level's one. That in turn can cause
excessive/unneeded receive buffer increase.
On such links, the initial rtt_us value is considerably higher than the
actual delay, and the current mptcp_rcv_space_adjust() updates
msk->rcvq_space.rtt_us with a period equal to the such field previous
value. If the initial rtt_us is 40ms, its first update will happen after
40ms, even if the subflows see actual RTT orders of magnitude lower.
Additionally:
- setting the msk RTT to the maximum among all the subflows RTTs makes
DRS constantly overshooting the rcvbuf size when a subflow has
considerable higher latency than the other(s).
- during unidirectional bulk transfers with multiple active subflows,
the TCP-level RTT estimator occasionally sees considerably higher
value than the real link delay, i.e. when the packet scheduler reacts
to an incoming ACK on given subflow pushing data on a different
subflow.
- currently inactive but still open subflows (i.e. switched to backup
mode) are always considered when computing the msk-level RTT.
Address the all the issues above with a more accurate RTT estimation
strategy: the MPTCP-level RTT is set to the minimum of all the subflows
actually feeding data into the MPTCP receive buffer, using a small
sliding window.
While at it, also use EWMA to compute the msk-level scaling_ratio, to
that MPTCP can avoid traversing the subflow list is
mptcp_rcv_space_adjust().
Use some care to avoid updating msk and ssk level fields too often.
Fixes: a6b118febb ("mptcp: add receive buffer auto-tuning")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260407-net-next-mptcp-reduce-rbuf-v2-1-0d1d135bf6f6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit was originally adding the ability to add MPTCP endpoints
with ID 0 by accident. The in-kernel PM, handling MPTCP endpoints at the
net namespace level, is not supposed to handle endpoints with such ID,
because this ID 0 is reserved to the initial subflow, as mentioned in
the MPTCPv1 protocol [1], a per-connection setting.
Note that 'ip mptcp endpoint add id 0' stops early with an error, but
other tools might still request the in-kernel PM to create MPTCP
endpoints with this restricted ID 0.
In other words, it was wrong to call the mptcp_pm_has_addr_attr_id
helper to check whether the address ID attribute is set: if it was set
to 0, a new MPTCP endpoint would be created with ID 0, which is not
expected, and might cause various issues later.
Fixes: 584f389426 ("mptcp: add needs_id for netlink appending addr")
Cc: stable@vger.kernel.org
Link: https://datatracker.ietf.org/doc/html/rfc8684#section-3.2-9 [1]
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260407-net-mptcp-revert-pm-needs-id-v2-1-7a25cbc324f8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ehash table lookups are lockless and rely on
SLAB_TYPESAFE_BY_RCU to guarantee socket memory stability
during RCU read-side critical sections. Both tcp_prot and
tcpv6_prot have their slab caches created with this flag
via proto_register().
However, MPTCP's mptcp_subflow_init() copies tcpv6_prot into
tcpv6_prot_override during inet_init() (fs_initcall, level 5),
before inet6_init() (module_init/device_initcall, level 6) has
called proto_register(&tcpv6_prot). At that point,
tcpv6_prot.slab is still NULL, so tcpv6_prot_override.slab
remains NULL permanently.
This causes MPTCP v6 subflow child sockets to be allocated via
kmalloc (falling into kmalloc-4k) instead of the TCPv6 slab
cache. The kmalloc-4k cache lacks SLAB_TYPESAFE_BY_RCU, so
when these sockets are freed without SOCK_RCU_FREE (which is
cleared for child sockets by design), the memory can be
immediately reused. Concurrent ehash lookups under
rcu_read_lock can then access freed memory, triggering a
slab-use-after-free in __inet_lookup_established.
Fix this by splitting the IPv6-specific initialization out of
mptcp_subflow_init() into a new mptcp_subflow_v6_init(), called
from mptcp_proto_v6_init() before protocol registration. This
ensures tcpv6_prot_override.slab correctly inherits the
SLAB_TYPESAFE_BY_RCU slab cache.
Fixes: b19bc2945b ("mptcp: implement delegated actions")
Cc: stable@vger.kernel.org
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260406031512.189159-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk_clone() initializes sk_tx_queue_mapping via sk_tx_queue_clear()
but does not initialize sk_rx_queue_mapping. Since this field is in
the sk_dontcopy region, it is neither copied from the parent socket
by sock_copy() nor zeroed by sk_prot_alloc() (called without
__GFP_ZERO from sk_clone).
Commit 03cfda4fa6 ("tcp: fix another uninit-value
(sk_rx_queue_mapping)") attempted to fix this by introducing
sk_mark_napi_id_set() with force_set=true in tcp_child_process().
However, sk_mark_napi_id_set() -> sk_rx_queue_set() only writes
when skb_rx_queue_recorded(skb) is true. If the 3-way handshake
ACK arrives through a device that does not record rx_queue (e.g.
loopback or veth), sk_rx_queue_mapping remains uninitialized.
When a subsequent data packet arrives with a recorded rx_queue,
sk_mark_napi_id() -> sk_rx_queue_update() reads the uninitialized
field for comparison (force_set=false path), triggering KMSAN.
This was reproduced by establishing a TCP connection over loopback
(which does not call skb_record_rx_queue), then attaching a BPF TC
program on lo ingress to set skb->queue_mapping on data packets:
BUG: KMSAN: uninit-value in tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1875)
tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1875)
tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2287)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:207)
ip_local_deliver_finish (net/ipv4/ip_input.c:242)
ip_local_deliver (net/ipv4/ip_input.c:262)
ip_rcv (net/ipv4/ip_input.c:573)
__netif_receive_skb (net/core/dev.c:6294)
process_backlog (net/core/dev.c:6646)
__napi_poll (net/core/dev.c:7710)
net_rx_action (net/core/dev.c:7929)
handle_softirqs (kernel/softirq.c:623)
do_softirq (kernel/softirq.c:523)
__local_bh_enable_ip (kernel/softirq.c:?)
__dev_queue_xmit (net/core/dev.c:?)
ip_finish_output2 (net/ipv4/ip_output.c:237)
ip_output (net/ipv4/ip_output.c:438)
__ip_queue_xmit (net/ipv4/ip_output.c:534)
__tcp_transmit_skb (net/ipv4/tcp_output.c:1693)
tcp_write_xmit (net/ipv4/tcp_output.c:3064)
tcp_sendmsg_locked (net/ipv4/tcp.c:?)
tcp_sendmsg (net/ipv4/tcp.c:1465)
inet_sendmsg (net/ipv4/af_inet.c:865)
sock_write_iter (net/socket.c:1195)
vfs_write (fs/read_write.c:688)
...
Uninit was created at:
kmem_cache_alloc_noprof (mm/slub.c:4873)
sk_prot_alloc (net/core/sock.c:2239)
sk_alloc (net/core/sock.c:2301)
inet_create (net/ipv4/af_inet.c:334)
__sock_create (net/socket.c:1605)
__sys_socket (net/socket.c:1747)
Fix this at the root by adding sk_rx_queue_clear() alongside
sk_tx_queue_clear() in sk_clone().
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260407084219.95718-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
codel_dump_stats() only runs with RTNL held,
reading fields that can be changed in qdisc fast path.
Add READ_ONCE()/WRITE_ONCE() annotations.
Alternative would be to acquire the qdisc spinlock, but our long-term
goal is to make qdisc dump operations lockless as much as we can.
tc_codel_xstats fields don't need to be latched atomically,
otherwise this bug would have been caught earlier.
No change in kernel size:
$ scripts/bloat-o-meter -t vmlinux.0 vmlinux
add/remove: 0/0 grow/shrink: 1/1 up/down: 3/-1 (2)
Function old new delta
codel_qdisc_dequeue 2462 2465 +3
codel_dump_stats 250 249 -1
Total: Before=29739919, After=29739921, chg +0.00%
Fixes: 76e3cc126b ("codel: Controlled Delay AQM")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260407143053.1570620-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When trace->type.bit6 is set:
if (trace->type.bit6) {
...
queue = skb_get_tx_queue(dev, skb);
qdisc = rcu_dereference(queue->qdisc);
This code can lead to an out-of-bounds access of the dev->_tx[] array
when is_input is true. In such a case, the packet is on the RX path and
skb->queue_mapping contains the RX queue index of the ingress device. If
the ingress device has more RX queues than the egress device (dev) has
TX queues, skb_get_queue_mapping(skb) will exceed dev->num_tx_queues.
Add a check to avoid this situation since skb_get_tx_queue() does not
clamp the index. This issue has also revealed that per queue visibility
cannot be accurate and will be replaced later as a new feature.
While at it, add missing lock around qdisc_qstats_qlen_backlog(). The
function __ioam6_fill_trace_data() is called from both softirq and
process contexts, hence the use of spin_lock_bh() here.
Fixes: b63c5478e9 ("ipv6: ioam: Support for Queue depth data field")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20260403214418.2233266-2-kuba@kernel.org/
Signed-off-by: Justin Iurman <justin.iurman@gmail.com>
Link: https://patch.msgid.link/20260404134137.24553-1-justin.iurman@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=T6NA
-----END PGP SIGNATURE-----
Merge tag 'nf-next-26-04-08' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter: updates for net-next
1) Fix ancient sparse warnings in nf conntrack nat modules, from
Sun Jian.
2) Fix typo in enum description, from Jelle van der Waa.
3) remove redundant refetch of netns pointer in nf_conntrack_sip.
4) add a deprecation warning for dccp match.
We can extend the deadline later if needed, but plan atm is to
remove the feature.
5) remove nf_conntrack_h323 debug code that can read out-of-bounds
with malformed messages. This code was commented out, but better
remove this.
6+7) add more netlink policy validations in netfilter.
This could theoretically cause issues when a client sends e.g.
unsupported feature flags that were previously ignored, so we
may have to relax some changes. For now, try to be stricter and
reject upfront.
8+9) minor code cleanup in nft_set_pipapo (an nftables set backend).
10) Add nftables matching support fro double-tagged vlan and pppoe
frames, from Pablo Neira Ayuso.
11) Fix up indentation of debug messages in nf_conntrack_h323 conntrack
helper, from David Laight.
12) Add a helper to iterate to next flow action and bail out if the
maximum number of actions is reached, also from Pablo.
* tag 'nf-next-26-04-08' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables_offload: add nft_flow_action_entry_next() and use it
netfilter: nf_conntrack_h323: Correct indentation when H323_TRACE defined
netfilter: nft_meta: add double-tagged vlan and pppoe support
netfilter: nft_set_pipapo_avx2: remove redundant loop in lookup_slow
netfilter: nft_set_pipapo: increment data in one step
netfilter: nf_tables: add netlink policy based cap on registers
netfilter: add more netlink-based policy range checks
netfilter: nf_conntrack_h323: remove unreliable debug code in decode_octstr
netfilter: add deprecation warning for dccp support
netfilter: nf_conntrack_sip: remove net variable shadowing
netfilter: nf_tables: Fix typo in enum description
netfilter: use function typedefs for __rcu NAT helper hook pointers
====================
Link: https://patch.msgid.link/20260408060419.25258-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=vtxh
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2026-04-08' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2026-04-08
1) Clear trailing padding in build_polexpire() to prevent
leaking unititialized memory. From Yasuaki Torimaru.
2) Fix aevent size calculation when XFRMA_IF_ID is used.
From Keenan Dong.
3) Wait for RCU readers during policy netns exit before
freeing the policy hash tables.
4) Fix dome too eaerly dropped references on the netdev
when uding transport mode. From Qi Tang.
5) Fix refcount leak in xfrm_migrate_policy_find().
From Kotlyarov Mihail.
6) Fix two fix info leaks in build_report() and
in build_mapping(). From Greg Kroah-Hartman.
7) Zero aligned sockaddr tail in PF_KEY exports.
From Zhengchuan Liang.
* tag 'ipsec-2026-04-08' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
net: af_key: zero aligned sockaddr tail in PF_KEY exports
xfrm_user: fix info leak in build_report()
xfrm_user: fix info leak in build_mapping()
xfrm: fix refcount leak in xfrm_migrate_policy_find
xfrm: hold dev ref until after transport_finish NF_HOOK
xfrm: Wait for RCU readers during policy netns exit
xfrm: account XFRMA_IF_ID in aevent size calculation
xfrm: clear trailing padding in build_polexpire()
====================
Link: https://patch.msgid.link/20260408095925.253681-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=0E3L
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2026-04-08' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2026-04-08
1) Update outdated comment in xfrm_dst_check().
From kexinsun.
2) Drop support for HMAC-RIPEMD-160 from IPsec.
From Eric Biggers.
* tag 'ipsec-next-2026-04-08' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: Drop support for HMAC-RIPEMD-160
xfrm: update outdated comment
====================
Link: https://patch.msgid.link/20260408094258.148555-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- reject oversized global TT response buffers, by Ruide Cao
- hold claim backbone gateways by reference, by Haoze Xie
-----BEGIN PGP SIGNATURE-----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=PjUC
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-pullrequest-20260408' of https://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are two batman-adv bugfixes:
- reject oversized global TT response buffers, by Ruide Cao
- hold claim backbone gateways by reference, by Haoze Xie
* tag 'batadv-net-pullrequest-20260408' of https://git.open-mesh.org/linux-merge:
batman-adv: hold claim backbone gateways by reference
batman-adv: reject oversized global TT response buffers
====================
Link: https://patch.msgid.link/20260408110255.976389-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ybYL
-----END PGP SIGNATURE-----
Merge tag 'nf-26-04-08' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter updates for net
I only included crash fixes, as we're closer to a release, rest will
be handled via -next.
1) Fix a NULL pointer dereference in ip_vs_add_service error path, from
Weiming Shi, bug added in 6.2 development cycle.
2) Don't leak kernel data bytes from allocator to userspace: nfnetlink_log
needs to init the trailing NLMSG_DONE terminator. From Xiang Mei.
3) xt_multiport match lacks range validation, bogus userspace request will
cause out-of-bounds read. From Ren Wei.
4) ip6t_eui64 match must reject packets with invalid mac header before
calling eth_hdr. Make existing check unconditional. From Zhengchuan
Liang.
5) nft_ct timeout policies are free'd via kfree() while they may still
be reachable by other cpus that process a conntrack object that
uses such a timeout policy. Existing reaping of entries is not
sufficient because it doesn't wait for a grace period. Use kfree_rcu().
From Tuan Do.
6/7) Make nfnetlink_queue hash table per queue. As-is we can hit a page
fault in case underlying page of removed element was free'd. Per-queue
hash prevents parallel lookups. This comes with a test case that
demonstrates the bug, from Fernando Fernandez Mancera.
* tag 'nf-26-04-08' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: nft_queue.sh: add a parallel stress test
netfilter: nfnetlink_queue: make hash table per queue
netfilter: nft_ct: fix use-after-free in timeout object destroy
netfilter: ip6t_eui64: reject invalid MAC header for all packets
netfilter: xt_multiport: validate range encoding in checkentry
netfilter: nfnetlink_log: initialize nfgenmsg in NLMSG_DONE terminator
ipvs: fix NULL deref in ip_vs_add_service error path
====================
Link: https://patch.msgid.link/20260408163512.30537-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The AF_RXRPC procfs helpers format local and remote socket addresses into
fixed 50-byte stack buffers with "%pISpc".
That is too small for the longest current-tree IPv6-with-port form the
formatter can produce. In lib/vsprintf.c, the compressed IPv6 path uses a
dotted-quad tail not only for v4mapped addresses, but also for ISATAP
addresses via ipv6_addr_is_isatap().
As a result, a case such as
[ffff:ffff:ffff:ffff:0:5efe:255.255.255.255]:65535
is possible with the current formatter. That is 50 visible characters, so
51 bytes including the trailing NUL, which does not fit in the existing
char[50] buffers used by net/rxrpc/proc.c.
Size the buffers from the formatter's maximum textual form and switch the
call sites to scnprintf().
Changes since v1:
- correct the changelog to cite the actual maximum current-tree case
explicitly
- frame the proof around the ISATAP formatting path instead of the earlier
mapped-v4 example
Fixes: 75b54cb57c ("rxrpc: Add IPv6 support")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Anderson Nascimento <anderson@allelesecurity.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260408121252.2249051-22-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Only process RESPONSE packets while the service connection is still in
RXRPC_CONN_SERVICE_CHALLENGING. Check that state under state_lock before
running response verification and security initialization, then use a local
secured flag to decide whether to queue the secured-connection work after
the state transition. This keeps duplicate or late RESPONSE packets from
re-running the setup path and removes the unlocked post-transition state
test.
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Jie Wang <jiewang2024@lzu.edu.cn>
Signed-off-by: Yang Yang <n05ec@lzu.edu.cn>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260408121252.2249051-21-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
An AF_RXRPC socket can be both client and server at the same time. When
sending new calls (ie. it's acting as a client), it uses rx->key to set the
security, and when accepting incoming calls (ie. it's acting as a server),
it uses rx->securities.
setsockopt(RXRPC_SECURITY_KEY) sets rx->key to point to an rxrpc-type key
and setsockopt(RXRPC_SECURITY_KEYRING) sets rx->securities to point to a
keyring of rxrpc_s-type keys.
Now, it should be possible to use both rx->key and rx->securities on the
same socket - but for userspace AF_RXRPC sockets rxrpc_setsockopt()
prevents that.
Fix this by:
(1) Remove the incorrect check rxrpc_setsockopt(RXRPC_SECURITY_KEYRING)
makes on rx->key.
(2) Move the check that rxrpc_setsockopt(RXRPC_SECURITY_KEY) makes on
rx->key down into rxrpc_request_key().
(3) Remove rxrpc_request_key()'s check on rx->securities.
This (in combination with a previous patch) pushes the checks down into the
functions that set those pointers and removes the cross-checks that prevent
both key and keyring being set.
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Closes: https://sashiko.dev/#/patchset/20260401105614.1696001-10-dhowells@redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Anderson Nascimento <anderson@allelesecurity.com>
cc: Luxiao Xu <rakukuip@gmail.com>
cc: Yuan Tan <yuantan098@gmail.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260408121252.2249051-16-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch fixes a reference count leak in rxrpc_server_keyring()
by checking if rx->securities is already set.
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Tested-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Luxiao Xu <rakukuip@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260408121252.2249051-15-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rxgk_verify_response() decodes auth_len from the packet and is supposed
to verify that it fits in the remaining bytes. The existing check is
inverted, so oversized RESPONSE authenticators are accepted and passed
to rxgk_decrypt_skb(), which can later reach skb_to_sgvec() with an
impossible length and hit BUG_ON(len).
Decoded from the original latest-net reproduction logs with
scripts/decode_stacktrace.sh:
RIP: __skb_to_sgvec()
[net/core/skbuff.c:5285 (discriminator 1)]
Call Trace:
skb_to_sgvec() [net/core/skbuff.c:5305]
rxgk_decrypt_skb() [net/rxrpc/rxgk_common.h:81]
rxgk_verify_response() [net/rxrpc/rxgk.c:1268]
rxrpc_process_connection()
[net/rxrpc/conn_event.c:266 net/rxrpc/conn_event.c:364
net/rxrpc/conn_event.c:386]
process_one_work() [kernel/workqueue.c:3281]
worker_thread()
[kernel/workqueue.c:3353 kernel/workqueue.c:3440]
kthread() [kernel/kthread.c:436]
ret_from_fork() [arch/x86/kernel/process.c:164]
Reject authenticator lengths that exceed the remaining packet payload.
Fixes: 9d1d2b5934 ("rxrpc: rxgk: Implement the yfs-rxgk security class (GSSAPI)")
Signed-off-by: Keenan Dong <keenanat2000@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: Willy Tarreau <w@1wt.eu>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260408121252.2249051-14-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rxgk_verify_authenticator() copies auth_len bytes into a temporary
buffer and then passes p + auth_len as the parser limit to
rxgk_do_verify_authenticator(). Since p is a __be32 *, that inflates the
parser end pointer by a factor of four and lets malformed RESPONSE
authenticators read past the kmalloc() buffer.
Decoded from the original latest-net reproduction logs with
scripts/decode_stacktrace.sh:
BUG: KASAN: slab-out-of-bounds in rxgk_verify_response()
Call Trace:
dump_stack_lvl() [lib/dump_stack.c:123]
print_report() [mm/kasan/report.c:379 mm/kasan/report.c:482]
kasan_report() [mm/kasan/report.c:597]
rxgk_verify_response()
[net/rxrpc/rxgk.c:1103 net/rxrpc/rxgk.c:1167
net/rxrpc/rxgk.c:1274]
rxrpc_process_connection()
[net/rxrpc/conn_event.c:266 net/rxrpc/conn_event.c:364
net/rxrpc/conn_event.c:386]
process_one_work() [kernel/workqueue.c:3281]
worker_thread()
[kernel/workqueue.c:3353 kernel/workqueue.c:3440]
kthread() [kernel/kthread.c:436]
ret_from_fork() [arch/x86/kernel/process.c:164]
Allocated by task 54:
rxgk_verify_response()
[include/linux/slab.h:954 net/rxrpc/rxgk.c:1155
net/rxrpc/rxgk.c:1274]
rxrpc_process_connection()
[net/rxrpc/conn_event.c:266 net/rxrpc/conn_event.c:364
net/rxrpc/conn_event.c:386]
Convert the byte count to __be32 units before constructing the parser
limit.
Fixes: 9d1d2b5934 ("rxrpc: rxgk: Implement the yfs-rxgk security class (GSSAPI)")
Signed-off-by: Keenan Dong <keenanat2000@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: Willy Tarreau <w@1wt.eu>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260408121252.2249051-13-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rxkad_decrypt_ticket() decrypts the RXKAD response ticket and then
parses the buffer as plaintext without checking whether
crypto_skcipher_decrypt() succeeded.
A malformed RESPONSE can therefore use a non-block-aligned ticket
length, make the decrypt operation fail, and still drive the ticket
parser with attacker-controlled bytes.
Check the decrypt result and abort the connection with RXKADBADTICKET
when ticket decryption fails.
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Tested-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Yuqi Xu <xuyuqiabc@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260408121252.2249051-12-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rxrpc_input_packet_on_conn() can process a to-client packet after the
current client call on the channel has already been torn down. In that
case chan->call is NULL, rxrpc_try_get_call() returns NULL and there is
no reference to drop.
The client-side implicit-end error path does not account for that and
unconditionally calls rxrpc_put_call(). This turns a protocol error
path into a kernel crash instead of rejecting the packet.
Only drop the call reference if one was actually acquired. Keep the
existing protocol error handling unchanged.
Fixes: 5e6ef4f101 ("rxrpc: Make the I/O thread take over the call and local processor work")
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Signed-off-by: Douya Le <ldy3087146292@gmail.com>
Co-developed-by: Yuan Tan <tanyuan98@gmail.com>
Signed-off-by: Yuan Tan <tanyuan98@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Ao Zhou <n05ec@lzu.edu.cn>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260408121252.2249051-11-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Peers may only send immediate acks for every 2 UDP packets received.
When sending a jumbogram, it is important to check that there is
sufficient window space to send another same sized jumbogram following
the current one, and request an ack if there isn't. Failure to do so may
cause the call to stall waiting for an ack until the resend timer fires.
Where jumbograms are in use this causes a very significant drop in
performance.
Fixes: fe24a54943 ("rxrpc: Send jumbo DATA packets")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260408121252.2249051-10-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When creating a client call in rxrpc_alloc_client_call(), the code obtains
a reference to the key. This is never cleaned up and gets leaked when the
call is destroyed.
Fix this by freeing call->key in rxrpc_destroy_call().
Before the patch, it shows the key reference counter elevated:
$ cat /proc/keys | grep afs@54321
1bffe9cd I--Q--i 8053480 4169w 3b010000 1000 1000 rxrpc afs@54321: ka
$
After the patch, the invalidated key is removed when the code exits:
$ cat /proc/keys | grep afs@54321
$
Fixes: f3441d4125 ("rxrpc: Copy client call parameters into rxrpc_call earlier")
Signed-off-by: Anderson Nascimento <anderson@allelesecurity.com>
Co-developed-by: David Howells <dhowells@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260408121252.2249051-9-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rxrpc_rack_timer_expired() clears call->rack_timer_mode to OFF before
the switch. The default case warning therefore always prints OFF and
doesn't identify the unexpected timer mode.
Log the saved mode value instead so the warning reports the actual
unexpected rack timer mode.
Fixes: 7c48266593 ("rxrpc: Implement RACK/TLP to deal with transmission stalls [RFC8985]")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260408121252.2249051-8-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In rxrpc_post_response(), the code should be comparing the challenge serial
number from the cached response before deciding to switch to a newer
response, but looks at the newer packet private data instead, rendering the
comparison always false.
Fix this by switching to look at the older packet.
Fix further[1] to substitute the new packet in place of the old one if
newer and also to release whichever we don't use.
Fixes: 5800b1cf3f ("rxrpc: Allow CHALLENGEs to the passed to the app for a RESPONSE")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://sashiko.dev/#/patchset/20260319150150.4189381-1-dhowells%40redhat.com [1]
Link: https://patch.msgid.link/20260408121252.2249051-7-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rxrpc_preparse_xdr_yfs_rxgk() reads the raw key length and ticket length
from the XDR token as u32 values and passes each through round_up(x, 4)
before using the rounded value for validation and allocation. When the raw
length is >= 0xfffffffd, round_up() wraps to 0, so the bounds check and
kzalloc both use 0 while the subsequent memcpy still copies the original
~4 GiB value, producing a heap buffer overflow reachable from an
unprivileged add_key() call.
Fix this by:
(1) Rejecting raw key lengths above AFSTOKEN_GK_KEY_MAX and raw ticket
lengths above AFSTOKEN_GK_TOKEN_MAX before rounding, consistent with
the caps that the RxKAD path already enforces via AFSTOKEN_RK_TIX_MAX.
(2) Sizing the flexible-array allocation from the validated raw key
length via struct_size_t() instead of the rounded value.
(3) Caching the raw lengths so that the later field assignments and
memcpy calls do not re-read from the token, eliminating a class of
TOCTOU re-parse.
The control path (valid token with lengths within bounds) is unaffected.
Fixes: 0ca100ff4d ("rxrpc: Add YFS RxGK (GSSAPI) security class")
Signed-off-by: Oleh Konko <security@1seal.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260408121252.2249051-6-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix rxrpc call removal from the rxnet->calls list to use list_del_rcu()
rather than list_del_init() to prevent stuffing up reading
/proc/net/rxrpc/calls from potentially getting into an infinite loop.
This, however, means that list_empty() no longer works on an entry that's
been deleted from the list, making it harder to detect prior deletion. Fix
this by:
Firstly, make rxrpc_destroy_all_calls() only dump the first ten calls that
are unexpectedly still on the list. Limiting the number of steps means
there's no need to call cond_resched() or to remove calls from the list
here, thereby eliminating the need for rxrpc_put_call() to check for that.
rxrpc_put_call() can then be fixed to unconditionally delete the call from
the list as it is the only place that the deletion occurs.
Fixes: 2baec2c3f8 ("rxrpc: Support network namespacing")
Closes: https://sashiko.dev/#/patchset/20260319150150.4189381-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260408121252.2249051-5-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In rxrpc_new_client_call_for_sendmsg(), a key with no payload is meant to
be substituted for a NULL key pointer, but the variable this is done with
is subsequently not used.
Fix this by using "key" rather than "rx->key" when filling in the
connection parameters.
Note that this only affects direct use of AF_RXRPC; the kAFS filesystem
doesn't use sendmsg() directly and so bypasses the issue. Further,
AF_RXRPC passes a NULL key in if no key is set, so using an anonymous key
in that manner works. Since this hasn't been noticed to this point, it
might be better just to remove the "key" variable and the code that sets it
- and, arguably, rxrpc_init_client_call_security() would be a better place
to handle it.
Fixes: 19ffa01c9c ("rxrpc: Use structs to hold connection params and protocol info")
Closes: https://sashiko.dev/#/patchset/20260319150150.4189381-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260408121252.2249051-4-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sharing a global hash table among all queues is tempting, but
it can cause crash:
BUG: KASAN: slab-use-after-free in nfqnl_recv_verdict+0x11ac/0x15e0 [nfnetlink_queue]
[..]
nfqnl_recv_verdict+0x11ac/0x15e0 [nfnetlink_queue]
nfnetlink_rcv_msg+0x46a/0x930
kmem_cache_alloc_node_noprof+0x11e/0x450
struct nf_queue_entry is freed via kfree, but parallel cpu can still
encounter such an nf_queue_entry when walking the list.
Alternative fix is to free the nf_queue_entry via kfree_rcu() instead,
but as we have to alloc/free for each skb this will cause more mem
pressure.
Cc: Scott Mitchell <scott.k.mitch1@gmail.com>
Fixes: e19079adcd ("netfilter: nfnetlink_queue: optimize verdict lookup with hash table")
Signed-off-by: Florian Westphal <fw@strlen.de>
nft_ct_timeout_obj_destroy() frees the timeout object with kfree()
immediately after nf_ct_untimeout(), without waiting for an RCU grace
period. Concurrent packet processing on other CPUs may still hold
RCU-protected references to the timeout object obtained via
rcu_dereference() in nf_ct_timeout_data().
Add an rcu_head to struct nf_ct_timeout and use kfree_rcu() to defer
freeing until after an RCU grace period, matching the approach already
used in nfnetlink_cttimeout.c.
KASAN report:
BUG: KASAN: slab-use-after-free in nf_conntrack_tcp_packet+0x1381/0x29d0
Read of size 4 at addr ffff8881035fe19c by task exploit/80
Call Trace:
nf_conntrack_tcp_packet+0x1381/0x29d0
nf_conntrack_in+0x612/0x8b0
nf_hook_slow+0x70/0x100
__ip_local_out+0x1b2/0x210
tcp_sendmsg_locked+0x722/0x1580
__sys_sendto+0x2d8/0x320
Allocated by task 75:
nft_ct_timeout_obj_init+0xf6/0x290
nft_obj_init+0x107/0x1b0
nf_tables_newobj+0x680/0x9c0
nfnetlink_rcv_batch+0xc29/0xe00
Freed by task 26:
nft_obj_destroy+0x3f/0xa0
nf_tables_trans_destroy_work+0x51c/0x5c0
process_one_work+0x2c4/0x5a0
Fixes: 7e0b2b57f0 ("netfilter: nft_ct: add ct timeout support")
Cc: stable@vger.kernel.org
Signed-off-by: Tuan Do <tuan@calif.io>
Signed-off-by: Florian Westphal <fw@strlen.de>
`eui64_mt6()` derives a modified EUI-64 from the Ethernet source address
and compares it with the low 64 bits of the IPv6 source address.
The existing guard only rejects an invalid MAC header when
`par->fragoff != 0`. For packets with `par->fragoff == 0`, `eui64_mt6()`
can still reach `eth_hdr(skb)` even when the MAC header is not valid.
Fix this by removing the `par->fragoff != 0` condition so that packets
with an invalid MAC header are rejected before accessing `eth_hdr(skb)`.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Tested-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Zhengchuan Liang <zcliangcn@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Florian Westphal <fw@strlen.de>
ports_match_v1() treats any non-zero pflags entry as the start of a
port range and unconditionally consumes the next ports[] element as
the range end.
The checkentry path currently validates protocol, flags and count, but
it does not validate the range encoding itself. As a result, malformed
rules can mark the last slot as a range start or place two range starts
back to back, leaving ports_match_v1() to step past the last valid
ports[] element while interpreting the rule.
Reject malformed multiport v1 rules in checkentry by validating that
each range start has a following element and that the following element
is not itself marked as another range start.
Fixes: a89ecb6a2e ("[NETFILTER]: x_tables: unify IPv4/IPv6 multiport match")
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Tested-by: Yuhang Zheng <z1652074432@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Florian Westphal <fw@strlen.de>
When batching multiple NFLOG messages (inst->qlen > 1), __nfulnl_send()
appends an NLMSG_DONE terminator with sizeof(struct nfgenmsg) payload via
nlmsg_put(), but never initializes the nfgenmsg bytes. The nlmsg_put()
helper only zeroes alignment padding after the payload, not the payload
itself, so four bytes of stale kernel heap data are leaked to userspace
in the NLMSG_DONE message body.
Use nfnl_msg_put() to build the NLMSG_DONE terminator, which initializes
the nfgenmsg payload via nfnl_fill_hdr(), consistent with how
__build_packet_message() already constructs NFULNL_MSG_PACKET headers.
Fixes: 29c5d4afba ("[NETFILTER]: nfnetlink_log: fix sending of multipart messages")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Florian Westphal <fw@strlen.de>
When ip_vs_bind_scheduler() succeeds in ip_vs_add_service(), the local
variable sched is set to NULL. If ip_vs_start_estimator() subsequently
fails, the out_err cleanup calls ip_vs_unbind_scheduler(svc, sched)
with sched == NULL. ip_vs_unbind_scheduler() passes the cur_sched NULL
check (because svc->scheduler was set by the successful bind) but then
dereferences the NULL sched parameter at sched->done_service, causing a
kernel panic at offset 0x30 from NULL.
Oops: general protection fault, [..] [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
RIP: 0010:ip_vs_unbind_scheduler (net/netfilter/ipvs/ip_vs_sched.c:69)
Call Trace:
<TASK>
ip_vs_add_service.isra.0 (net/netfilter/ipvs/ip_vs_ctl.c:1500)
do_ip_vs_set_ctl (net/netfilter/ipvs/ip_vs_ctl.c:2809)
nf_setsockopt (net/netfilter/nf_sockopt.c:102)
[..]
Fix by simply not clearing the local sched variable after a successful
bind. ip_vs_unbind_scheduler() already detects whether a scheduler is
installed via svc->scheduler, and keeping sched non-NULL ensures the
error path passes the correct pointer to both ip_vs_unbind_scheduler()
and ip_vs_scheduler_put().
While the bug is older, the problem popups in more recent kernels (6.2),
when the new error path is taken after the ip_vs_start_estimator() call.
Fixes: 705dd34440 ("ipvs: use kthreads for stats estimation")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Acked-by: Simon Horman <horms@kernel.org>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Export michael_mic() so that the ath11k and ath12k drivers can call it.
In addition, move it from mac80211 to cfg80211 so that the ipw2x00
drivers, which depend on cfg80211 but not mac80211, can also call it.
Currently these drivers have their own local implementations of
michael_mic() based on crypto_shash, which is redundant and inefficient.
By consolidating all the Michael MIC code into cfg80211, we'll be able
to remove the duplicate Michael MIC code in the crypto/ directory.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260408030651.80336-3-ebiggers@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a new helper function to retrieve the next action entry in flow
rule, check if the maximum number of actions is reached, bail out in
such case.
Replace existing opencoded iteration on the action array by this
helper function.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
The trace lines are indented using PRINT("%*.s", xx, " ").
Userspace will treat this as "%*.0s" and will output no characters
when 'xx' is zero, the kernel treats it as "%*s" and will output
a single ' ' - which is probably what is intended.
Change all the formats to "%*s" removing the default precision.
This gives a single space indent when level is zero.
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Currently:
add rule netdev x y ip saddr 1.1.1.1
does not work with neither double-tagged vlan nor pppoe packets. This is
because the network and transport header offset are not pointing to the
IP and transport protocol headers in the stack.
This patch expands NFT_META_PROTOCOL and NFT_META_L4PROTO to parse
double-tagged vlan and pppoe packets so matching network and transport
header fields becomes possible with the existing userspace generated
bytecode. Note that this parser only supports double-tagged vlan which
is composed of vlan offload + vlan header in the skb payload area for
simplicity.
NFT_META_PROTOCOL is used by bridge and netdev family as an implicit
dependency in the bytecode to match on network header fields.
Similarly, there is also NFT_META_L4PROTO, which is also used as an
implicit dependency when matching on the transport protocol header
fields.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
nft_pipapo_avx2_lookup_slow will never be used in reality, because the
common sizes are handled by avx2 optimized versions.
However, nft_pipapo_avx2_lookup_slow loops over the data just like the
avx2 functions. However, _slow doesn't need to do that.
As-is, first loop sets all the right result bits and the next iterations
boil down to 'x = x & x'. Remove the loop.
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Since commit e807b13cb3 ("nft_set_pipapo: Generalise group size for buckets")
there is no longer a need to increment the data pointer in two steps.
Switch to a single invocation of NFT_PIPAPO_GROUPS_PADDED_SIZE() helper,
like the avx2 implementation.
[ Stefano: Improve commit message ]
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Should have no effect in practice; all of these use the
nft_parse_register_load/store apis which is mandatory anyway due
to the need to further validate the register load/store, e.g.
that the size argument doesn't result in out-of-bounds load/store.
OTOH this is a simple method to reject obviously wrong input
at earlier stage.
Signed-off-by: Florian Westphal <fw@strlen.de>
These spots either already check the attribute range manually
before use or the consuming functions tolerate unexpected values.
Nevertheless, add more range checks via netlink policy so we gain
more users and avoid possible re-use in other places that might
not have the required manual checks. This also improves error
reporting: netlink core can generate extack errors.
Signed-off-by: Florian Westphal <fw@strlen.de>
The debug code (not enabled in any build) reads up to 6 octets of
the inpt buffer, but does so without bound checks. Zap this.
Signed-off-by: Florian Westphal <fw@strlen.de>
net is already set, derived from nf_conn.
I don't see how the device could be living in a different netns
than the conntrack entry.
Remove the extra variable and re-use existing one.
Signed-off-by: Florian Westphal <fw@strlen.de>
After commit 07919126ec ("netfilter: annotate NAT helper hook pointers
with __rcu"), sparse can warn about type/address-space mismatches when
RCU-dereferencing NAT helper hook function pointers.
The hooks are __rcu-annotated and accessed via rcu_dereference(), but the
combination of complex function pointer declarators and the WRITE_ONCE()
machinery used by RCU_INIT_POINTER()/rcu_assign_pointer() can confuse
sparse and trigger false positives.
Introduce typedefs for the NAT helper function types, so __rcu applies to
a simple "fn_t __rcu *" pointer form. Also replace local typeof(hook)
variables with "fn_t *" to avoid propagating __rcu address space into
temporaries.
No functional change intended.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603022359.3dGE9fwI-lkp@intel.com/
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
The seg6 lwtunnel uses a single dst_cache per encap route, shared
between seg6_input_core() and seg6_output_core(). These two paths
can perform the post-encap SID lookup in different routing contexts
(e.g., ip rules matching on the ingress interface, or VRF table
separation). Whichever path runs first populates the cache, and the
other reuses it blindly, bypassing its own lookup.
Fix this by splitting the cache into cache_input and cache_output,
so each path maintains its own cached dst independently.
Fixes: 6c8702c60b ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Cc: stable@vger.kernel.org
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Justin Iurman <justin.iurman@gmail.com>
Link: https://patch.msgid.link/20260404004405.4057-2-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most ndo_start_xmit() methods expects headers of gso packets
to be already in skb->head.
net/core/tso.c users are particularly at risk, because tso_build_hdr()
does a memcpy(hdr, skb->data, hdr_len);
qdisc_pkt_len_segs_init() already does a dissection of gso packets.
Use pskb_may_pull() instead of skb_header_pointer() to make
sure drivers do not have to reimplement this.
Some malicious packets could be fed, detect them so that we can
drop them sooner with a new SKB_DROP_REASON_SKB_BAD_GSO drop_reason.
Fixes: e876f208af ("net: Add a software TSO helper API")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260403221540.3297753-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reduce indentation level by returning early if the transport header
was not set.
Add an unlikely() clause as this is not the common case.
No functional change.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260403221540.3297753-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko points out that we use qops in __net_mp_open_rxq()
but never validate they are null. This was introduced when
check was moved from netdev_rx_queue_restart().
Look at ops directly instead of the locking config.
qops imply netdev_need_ops_lock(). We used netdev_need_ops_lock()
initially to signify that the real_num_rx_queues check below
is safe without rtnl_lock, but I'm not sure if this is actually
clear to most people, anyway.
Fixes: da7772a2b4 ("net: move mp->rx_page_size validation to __net_mp_open_rxq()")
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20260404001938.2425670-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an LSM hook security_unix_find.
This hook is called to check the path of a named UNIX socket before a
connection is initiated. The peer socket may be inspected as well.
Why existing hooks are unsuitable:
Existing socket hooks, security_unix_stream_connect(),
security_unix_may_send(), and security_socket_connect() don't provide
TOCTOU-free / namespace independent access to the paths of sockets.
(1) We cannot resolve the path from the struct sockaddr in existing hooks.
This requires another path lookup. A change in the path between the
two lookups will cause a TOCTOU bug.
(2) We cannot use the struct path from the listening socket, because it
may be bound to a path in a different namespace than the caller,
resulting in a path that cannot be referenced at policy creation time.
Consumers of the hook wishing to reference @other are responsible
for acquiring the unix_state_lock and checking for the SOCK_DEAD flag
therein, ensuring the socket hasn't died since lookup.
Cc: Günther Noack <gnoack3000@gmail.com>
Cc: Tingmao Wang <m@maowtm.org>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Paul Moore <paul@paul-moore.com>
Signed-off-by: Justin Suess <utilityemal77@gmail.com>
Signed-off-by: Günther Noack <gnoack3000@gmail.com>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20260327164838.38231-2-gnoack3000@gmail.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
On PRP protocol, when deleting the port the MAC address change
notification was missing. In addition to that, make sure to only perform
the MAC address change on slave2 deletion and PRP protocol as the
operation isn't necessary for HSR nor slave1.
Note that the eth_hw_addr_set() is correct on PRP context as the slaves
are either in promiscuous mode or forward offload enabled.
Reported-by: Luka Gejak <luka.gejak@linux.dev>
Closes: https://lore.kernel.org/netdev/DHFCZEM93FTT.1RWFBIE32K7OT@linux.dev/
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Felix Maurer <fmaurer@redhat.com>
Link: https://patch.msgid.link/20260403123928.4249-2-fmancera@suse.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current code does not support establishing MLO connections for
interfaces operating in 4-address AP_VLAN mode.
MLO bringup is blocked by sanity checks in cfg.c, iface.c, and mlme.c,
which prevent MLD initialization when use_4addr is enabled.
Remove these restrictions to allow 4-address AP_VLAN interfaces to
initialize as part of an MLD and successfully participate in MLO
connections. This patch series also adds the necessary changes to
support WDS operation in MLO, making these modifications valid.
Allow 4-address mode interfaces to:
- Proceed with MLD initialization during interface setup
- Add MLO links dynamically via ieee80211_add_intf_link()
- Establish associations with MLO-capable access points
- Support AP_VLAN interfaces with MLO parent APs
Signed-off-by: Tamizh Chelvam Raja <tamizh.raja@oss.qualcomm.com>
Link: https://patch.msgid.link/20260326164723.553927-4-tamizh.raja@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently ieee80211_send_4addr_nullfunc() uses deflink.u.mgd.bssid
for addr1 and addr3 fields. In MLO configurations, deflink.u.mgd.bssid
represents link 0's BSSID and is not updated when link 0 is not an
assoc link. This causes 4-address NULL frames to be sent to the
wrong address, preventing WDS AP_VLAN interface creation on the peer AP.
To fix this use sdata->vif.cfg.ap_addr instead, which contains the AP's MLD
address populated during authentication/association and remains
valid regardless of which links are active.
This ensures 4-address NULL frames reach the correct AP, allowing
proper WDS operation over MLO connections.
Co-developed-by: Sathishkumar Muruganandam <quic_murugana@quicinc.com>
Signed-off-by: Sathishkumar Muruganandam <quic_murugana@quicinc.com>
Signed-off-by: Tamizh Chelvam Raja <tamizh.raja@oss.qualcomm.com>
Link: https://patch.msgid.link/20260326164723.553927-3-tamizh.raja@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The current code does not provide any link-configuration support
for 4-address mode WDS AP_VLAN interfaces in MLO setups, preventing
MLD stations from being added correctly. Add the required handling
to enable proper integration of 4-address WDS stations into
an MLO environment.
When a 4-address station associates with an MLO AP, compute the
intersection of valid links between the master AP interface and
the station's advertised capabilities. Configure the AP_VLAN interface
with only these common links to ensure correct data-path operation.
This update ensures AP_VLAN interfaces correctly track link-state
transitions and maintain consistent addressing across all active MLO links.
Co-developed-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Signed-off-by: Tamizh Chelvam Raja <tamizh.raja@oss.qualcomm.com>
Link: https://patch.msgid.link/20260326164723.553927-2-tamizh.raja@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A station which has a NSS ratio on the number of streams it is capable of
in 160MHz VHT operation is supposed to use the 'Extended NSS BW Support'
as defined by section '9.4.2.156.2 VHT Capabilities Information field'.
This was missing in ieee80211_determine_our_sta_mode() and so we would
wrongfully downgrade our bandwidth when connecting to an AP that supported
160MHz with messages such as:
[ 37.638346] wlan1: AP XX:XX:XX:XX:XX:XX changed bandwidth in assoc response, new used config is 5280.000 MHz, width 3 (5290.000/0 MHz)
Fixes: 310c8387c6 ("wifi: mac80211: clean up connection process")
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
Link: https://patch.msgid.link/20260327100256.3101348-1-nico.escande@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Remove the unused variable max_rates and related code. Also remove the
variable mi and pass type to kzalloc_obj instead.
Signed-off-by: Jiajia Liu <liujiajia@kylinos.cn>
Link: https://patch.msgid.link/20260407063205.68471-1-liujiajia@kylinos.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Keys may be added to the NAN interfaces to protect
NAN management frames and data, allow that.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260326121156.34961ba9a0c4.I5b7c646c456d4112e5ab8663026153ace9b6b7d6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
According to Wi-Fi Aware (TM) 4.0 specification 6.2.5, in case a frame
is recevied from an address that doesn't belong to any active NDP, the
frame should be dropped and a NAN Data Path Termination should be sent
to the transmitter.
Do it by dropping the frame and calling cfg80211_rx_spurious_frame in
that case.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260326121156.721b3a61c580.I19e3572508beeba143871682c80e9a56b6c1046a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Accept frames there were received on NAN DATA interfaces:
- Data frames, both multicast or unicast
- Non-Public action frames, both multicast or unicast
- Unicast secure management frames
- FromDS and ToDS are 0.
While at it, check FromDS/ToDS also for NAN management frames.
Accept only data frames from devices that are part of the NAN
cluster.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260326121156.0e6f37d4a40c.Iaa84cc3d063392f0150fcdf2bf610bdb41062f70@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A carrier of an NDI interface is turned on when there is at least one NDI
station that: (1) correlates to this interface (2) is authorized (3) the
NAN peer to which this station belongs has at least one common slot with
the local schedule. Otherwise, it is turned off.
(common slots are slots where both schedules are active on compatible
channels.)
Implement the calculation of the carrier state and trigger it when
needed.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260326121156.98ff4115406f.Ie796487ab9eb23cda819b0afac57e7267b134911@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Peer schedules specify which channels the peer is available on and when.
Add support for configuring peer NAN schedules:
- build and store the schedule and maps
- for each channel, make sure that it fits into the capabilities, and
take the minimum between it and the local compatible nan channel.
- configure the driver
Note that the removal of a peer schedule should be done by the driver
upon NMI station removal.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260326121156.185ff2283fa6.I0345eb665be8ccf4a77eb1aca9a421eb8d2432e2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for both NMI and NDI stations.
The NDI station will be linked to the NMI station of the NAN peer for
which the NDI station is added.
A peer can choose to reuse its NMI address as the NDI address.
Since different keys might be in use for NAN management and for data
frames, we will have 2 different stations, even if they'll have the same
address.
Even though there are no links in NAN, sta->deflink will still be used
to store the one set of capabilities and SMPS mode.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260326121156.9fdd37b8e755.I7a7bd6e8e751cab49c329419485839afd209cfc6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Support opening and closing a NAN_DATA interface.
Track the NAN (NMI) interface, for convenience.
Allow opening an NAN_DATA interface only if the NAN interface is running
(NAN has started).
When closing the NAN interface, make sure all NAN_DATA interfaces are
closed first, and warn if this is not the case.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260326121156.a19de68119e5.Ia6724dac6a0e17cb69989dd714d14f4df1c69bef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A NAN local schedule consist of a list of NAN channels, and an array
that maps time slots to the channel it is scheduled to (or NULL to indicate
unscheduled).
A NAN channel is the configuration of a channel which is used for NAN
operations. It is a new type of chanctx user (before, the only user is a
link). A NAN channel may not have a chanctx assigned if it is ULWed out.
A NAN channel may or may not be scheduled (for example, user space
may want to prepare the resources before the actual schedule is
configured).
Add management of the NAN local schedule.
Since we introduce a new chanctx user, also adjust the different
for_each_chanctx_user_* macros to visit also the NAN channels and take
those into account.
Co-developed-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260326121156.03350fd40630.Id158f815cfc9b5ab1ebdb8ee608bda426e4d7474@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
NAN DE (Discovery Engine) may be handled in the device or in user space.
When handled in user space, all the NAN func management code should not
run. Moreover, devices with user space DE should not provide the
add/del_nan_func callbaks. For such devices, ieee80211_reconfig_nan will
always fail.
Make it clear what parts of ieee80211_if_nan are relevant to DE
management, and touch those only when DE is offloaded.
Add a check that makes sure that a driver doesn't register with
add_del/nan_func callbacks if DE is in user space.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260326121156.6665f64865cd.Iee24bef3bae2e1d502216192e760c1e699d271c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently there is no TXQ for non-data frames. Add a new txq_mgmt for
this purpose and create one of these on NAN devices. On NAN devices,
these frames may only be transmitted during the discovery window and it
is therefore helpful to schedule them using a queue.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260326121156.32eddd986bd2.Iee95758287c276155fbd7779d3f263339308e083@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The -EBUSY handling in tls_do_encryption(), introduced by commit
8590541473 ("net: tls: handle backlogging of crypto requests"), has
a use-after-free due to double cleanup of encrypt_pending and the
scatterlist entry.
When crypto_aead_encrypt() returns -EBUSY, the request is enqueued to
the cryptd backlog and the async callback tls_encrypt_done() will be
invoked upon completion. That callback unconditionally restores the
scatterlist entry (sge->offset, sge->length) and decrements
ctx->encrypt_pending. However, if tls_encrypt_async_wait() returns an
error, the synchronous error path in tls_do_encryption() performs the
same cleanup again, double-decrementing encrypt_pending and
double-restoring the scatterlist.
The double-decrement corrupts the encrypt_pending sentinel (initialized
to 1), making tls_encrypt_async_wait() permanently skip the wait for
pending async callbacks. A subsequent sendmsg can then free the
tls_rec via bpf_exec_tx_verdict() while a cryptd callback is still
pending, resulting in a use-after-free when the callback fires on the
freed record.
Fix this by skipping the synchronous cleanup when the -EBUSY async
wait returns an error, since the callback has already handled
encrypt_pending and sge restoration.
Fixes: 8590541473 ("net: tls: handle backlogging of crypto requests")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Alifa Ramdhan <ramdhan@starlabs.sg>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260403013617.2838875-1-ramdhan@starlabs.sg
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Userspace can create an unlimited number of rfkill events if the system
is so configured, while not consuming them from the rfkill file
descriptor, causing a potential out of memory situation. Prevent this
from bounding the number of pending rfkill events at a "large" number
(i.e. 1000) to prevent abuses like this.
Cc: Johannes Berg <johannes@sipsolutions.net>
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026033013-disfigure-scroll-e25e@gregkh
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
PF_KEY export paths use `pfkey_sockaddr_size()` when reserving sockaddr
payload space, so IPv6 addresses occupy 32 bytes on the wire. However,
`pfkey_sockaddr_fill()` initializes only the first 28 bytes of
`struct sockaddr_in6`, leaving the final 4 aligned bytes uninitialized.
Not every PF_KEY message is affected. The state and policy dump builders
already zero the whole message buffer before filling the sockaddr
payloads. Keep the fix to the export paths that still append aligned
sockaddr payloads with plain `skb_put()`:
- `SADB_ACQUIRE`
- `SADB_X_NAT_T_NEW_MAPPING`
- `SADB_X_MIGRATE`
Fix those paths by clearing only the aligned sockaddr tail after
`pfkey_sockaddr_fill()`.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Fixes: 08de61beab ("[PFKEYV2]: Extension for dynamic update of endpoint address(es)")
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Tested-by: Xiao Liu <lx24@stu.ynu.edu.cn>
Signed-off-by: Zhengchuan Liang <zcliangcn@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Drop support for HMAC-RIPEMD-160 from IPsec to reduce the UAPI surface
and simplify future maintenance. It's almost certainly unused.
RIPEMD-160 received some attention in the early 2000s when SHA-* weren't
quite as well established. But it never received much adoption outside
of certain niches such as Bitcoin.
It's actually unclear that Linux + IPsec + HMAC-RIPEMD-160 has *ever*
been used, even historically. When support for it was added in 2003, it
was done so in a "cleanup" commit without any justification [1]. It
didn't actually work until someone happened to fix it 5 years later [2].
That person didn't use or test it either [3]. Finally, also note that
"hmac(rmd160)" is by far the slowest of the algorithms in aalg_list[].
Of course, today IPsec is usually used with an AEAD, such as AES-GCM.
But even for IPsec users still using a dedicated auth algorithm, they
almost certainly aren't using, and shouldn't use, HMAC-RIPEMD-160.
Thus, let's just drop support for it. Note: no kconfig update is
needed, since CRYPTO_RMD160 wasn't actually being selected anyway.
References:
[1] linux-history commit d462985fc1941a47
("[IPSEC]: Clean up key manager algorithm handling.")
[2] linux commit a13366c632
("xfrm: xfrm_algo: correct usage of RIPEMD-160")
[3] https://lore.kernel.org/all/1212340578-15574-1-git-send-email-rueegsegger@swiss-it.ch
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
struct xfrm_user_report is a __u8 proto field followed by a struct
xfrm_selector which means there is three "empty" bytes of padding, but
the padding is never zeroed before copying to userspace. Fix that up by
zeroing the structure before setting individual member variables.
Cc: stable <stable@kernel.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
struct xfrm_usersa_id has a one-byte padding hole after the proto
field, which ends up never getting set to zero before copying out to
userspace. Fix that up by zeroing out the whole structure before
setting individual variables.
Fixes: 3a2dfbe8ac ("xfrm: Notify changes in UDP encapsulation via netlink")
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
syzkaller reported a memory leak in xfrm_policy_alloc:
BUG: memory leak
unreferenced object 0xffff888114d79000 (size 1024):
comm "syz.1.17", pid 931
...
xfrm_policy_alloc+0xb3/0x4b0 net/xfrm/xfrm_policy.c:432
The root cause is a double call to xfrm_pol_hold_rcu() in
xfrm_migrate_policy_find(). The lookup function already returns
a policy with held reference, making the second call redundant.
Remove the redundant xfrm_pol_hold_rcu() call to fix the refcount
imbalance and prevent the memory leak.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 563d5ca93e ("xfrm: switch migrate to xfrm_policy_lookup_bytype")
Signed-off-by: Kotlyarov Mihail <mihailkotlyarow@gmail.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
After async crypto completes, xfrm_input_resume() calls dev_put()
immediately on re-entry before the skb reaches transport_finish.
The skb->dev pointer is then used inside NF_HOOK and its okfn,
which can race with device teardown.
Remove the dev_put from the async resumption entry and instead
drop the reference after the NF_HOOK call in transport_finish,
using a saved device pointer since NF_HOOK may consume the skb.
This covers NF_DROP, NF_QUEUE and NF_STOLEN paths that skip
the okfn.
For non-transport exits (decaps, gro, drop) and secondary
async return points, release the reference inline when
async is set.
Suggested-by: Florian Westphal <fw@strlen.de>
Fixes: acf568ee85 ("xfrm: Reinject transport-mode packets through tasklet")
Cc: stable@vger.kernel.org
Signed-off-by: Qi Tang <tpluszz77@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
xfrm_policy_fini() frees the policy_bydst hash tables after flushing the
policy work items and deleting all policies, but it does not wait for
concurrent RCU readers to leave their read-side critical sections first.
The policy_bydst tables are published via rcu_assign_pointer() and are
looked up through rcu_dereference_check(), so netns teardown must also
wait for an RCU grace period before freeing the table memory.
Fix this by adding synchronize_rcu() before freeing the policy hash tables.
Fixes: e1e551bc56 ("xfrm: policy: prepare policy_bydst hash for rcu lookups")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Factor out a new helper tcp_recv_should_stop() from tcp_recvmsg_locked()
and tcp_splice_read() to check whether to stop receiving. And use this
helper in mptcp_recvmsg() and mptcp_splice_read() to reduce redundant code.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260403-net-next-mptcp-msg_eor-misc-v1-3-b0b33bea3fed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend MPTCP's sendmsg handling to recognize and honor the MSG_EOR flag,
which marks the end of a record for application-level message boundaries.
Data fragments tagged with MSG_EOR are explicitly marked in the
mptcp_data_frag structure and skb context to prevent unintended
coalescing with subsequent data chunks. This ensures the intent of
applications using MSG_EOR is preserved across MPTCP subflows,
maintaining consistent message segmentation behavior.
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260403-net-next-mptcp-msg_eor-misc-v1-2-b0b33bea3fed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'overhead' in struct mptcp_data_frag can safely use u8, as it
represents 'alignment + sizeof(mptcp_data_frag)'. With a maximum
alignment of 7('ALIGN(1, sizeof(long)) - 1'), the overhead is at most
47, well below U8_MAX and validated with BUILD_BUG_ON().
This patch also adds a field named 'unused' for further extensions.
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260403-net-next-mptcp-msg_eor-misc-v1-1-b0b33bea3fed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SKB_SMALL_HEAD_CACHE_SIZE is intentionally set to a non-power-of-2
value (e.g. 704 on x86_64) to avoid collisions with generic kmalloc
bucket sizes. This ensures that skb_kfree_head() can reliably use
skb_end_offset to distinguish skb heads allocated from
skb_small_head_cache vs. generic kmalloc caches.
However, when KFENCE is enabled, kfence_ksize() returns the exact
requested allocation size instead of the slab bucket size. If a caller
(e.g. bpf_test_init) allocates skb head data via kzalloc() and the
requested size happens to equal SKB_SMALL_HEAD_CACHE_SIZE, then
slab_build_skb() -> ksize() returns that exact value. After subtracting
skb_shared_info overhead, skb_end_offset ends up matching
SKB_SMALL_HEAD_HEADROOM, causing skb_kfree_head() to incorrectly free
the object to skb_small_head_cache instead of back to the original
kmalloc cache, resulting in a slab cross-cache free:
kmem_cache_free(skbuff_small_head): Wrong slab cache. Expected
skbuff_small_head but got kmalloc-1k
Fix this by always calling kfree(head) in skb_kfree_head(). This keeps
the free path generic and avoids allocator-specific misclassification
for KFENCE objects.
Fixes: bf9f1baa27 ("net: add dedicated kmem_cache for typical/small skb->head")
Reported-by: Antonius <antonius@bluedragonsec.com>
Closes: https://lore.kernel.org/netdev/CAK8a0jxC5L5N7hq-DT2_NhUyjBxrPocoiDazzsBk4TGgT1r4-A@mail.gmail.com/
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260403014517.142550-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
AF_XDP bind currently accepts zero-copy pool configurations without
verifying that the device MTU fits into the usable frame space provided
by the UMEM chunk.
This becomes a problem since we started to respect tailroom which is
subtracted from chunk_size (among with headroom). 2k chunk size might
not provide enough space for standard 1500 MTU, so let us catch such
settings at bind time. Furthermore, validate whether underlying HW will
be able to satisfy configured MTU wrt XSK's frame size multiplied by
supported Rx buffer chain length (that is exposed via
net_device::xdp_zc_max_segs).
Fixes: 24ea50127e ("xsk: support mbuf on ZC RX")
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20260402154958.562179-5-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently xp_assign_dev_shared() is missing XDP_USE_SG being propagated
to flags so set it in order to preserve mtu check that is supposed to be
done only when no multi-buffer setup is in picture.
Also, this flag has the same value as XDP_UMEM_TX_SW_CSUM so we could
get unexpected SG setups for software Tx checksums. Since csum flag is
UAPI, modify value of XDP_UMEM_SG_FLAG.
Fixes: d609f3d228 ("xsk: add multi-buffer support for sockets sharing umem")
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20260402154958.562179-4-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Multi-buffer XDP stores information about frags in skb_shared_info that
sits at the tailroom of a packet. The storage space is reserved via
xdp_data_hard_end():
((xdp)->data_hard_start + (xdp)->frame_sz - \
SKB_DATA_ALIGN(sizeof(struct skb_shared_info)))
and then we refer to it via macro below:
static inline struct skb_shared_info *
xdp_get_shared_info_from_buff(const struct xdp_buff *xdp)
{
return (struct skb_shared_info *)xdp_data_hard_end(xdp);
}
Currently we do not respect this tailroom space in multi-buffer AF_XDP
ZC scenario. To address this, introduce xsk_pool_get_tailroom() and use
it within xsk_pool_get_rx_frame_size() which is used in ZC drivers to
configure length of HW Rx buffer.
Typically drivers on Rx Hw buffers side work on 128 byte alignment so
let us align the value returned by xsk_pool_get_rx_frame_size() in order
to avoid addressing this on driver's side. This addresses the fact that
idpf uses mentioned function *before* pool->dev being set so we were at
risk that after subtracting tailroom we would not provide 128-byte
aligned value to HW.
Since xsk_pool_get_rx_frame_size() is actively used in xsk_rcv_check()
and __xsk_rcv(), add a variant of this routine that will not include 128
byte alignment and therefore old behavior is preserved.
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Fixes: 24ea50127e ("xsk: support mbuf on ZC RX")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20260402154958.562179-3-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current headroom validation in xdp_umem_reg() could leave us with
insufficient space dedicated to even receive minimum-sized ethernet
frame. Furthermore if multi-buffer would come to play then
skb_shared_info stored at the end of XSK frame would be corrupted.
HW typically works with 128-aligned sizes so let us provide this value
as bare minimum.
Multi-buffer setting is known later in the configuration process so
besides accounting for 128 bytes, let us also take care of tailroom space
upfront.
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Fixes: 99e3a236dd ("xsk: Add missing check on user supplied headroom size")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20260402154958.562179-2-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the locally defined for_each_ip6_tunnel_rcu macro and use
the generic for_each_ip_tunnel_rcu from linux/if_tunnel.h instead.
This eliminates code duplication and ensures consistency across
the kernel tunnel implementations.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260403084619.4107978-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When net.core.skb_defer_max is adjusted to zero, napi_consume_skb()
shouldn't go into that deeper in skb_attempt_defer_free() because it adds
an additional pair of local_bh_enable/disable() which is evidently not
needed. Advancing the check of the static key saves more cycles and
benefits non defer case.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Link: https://patch.msgid.link/20260402034114.65766-1-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MxL862xx offloads bridge forwarding in hardware, so set
dsa_default_offload_fwd_mark() to avoid duplicate forwarding of
packets of (eg. flooded) frames arriving at the CPU port.
Link-local frames are directly trapped to the CPU port only, so don't
set dsa_default_offload_fwd_mark() on those.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/e1161c90894ddc519c57dc0224b3a0f6bfa1d2d6.1775049897.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A common pattern in epoll network servers is to eagerly accept all
pending connections from the non-blocking listening socket after
epoll_wait indicates the socket is ready by calling accept in a loop
until EAGAIN is returned indicating that the backlog is empty.
Scheduling a timeout for a non-blocking accept with an empty backlog
meant AF_VSOCK sockets used by epoll network servers incurred hundreds
of microseconds of additional latency per accept loop compared to
AF_INET or AF_UNIX sockets.
Signed-off-by: Laurence Rowe <laurencerowe@gmail.com>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260402204918.130395-1-laurencerowe@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko reports:
> mctp_dst_from_route() increments the device reference count by calling
> mctp_dev_hold(). When a valid route is found and dst is NULL, the
> structure copy is bypassed and rc is set to 0.
Instead of optimistically creating a dst from the final route (then
releasing it if the saddr is invalid), perform the saddr check first.
This means we don't have an unuecessary hold/release on the dev, which
could leak if the dst pointer is NULL. No caller passes a NULL dst at
present though (so the leak is not possible), but this is an intended
use of mctp_dst_from_route().
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260403-dev-mctp-dst-defer-v1-1-9c2c55faf9e9@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko reports:
> This isn't a bug in the core networking code, but the addr parameter
> appears to be ignored here.
In mctp_test_create_dev_with_addr(), we are ignoring the addr argument
and just using `8`. Use the passed address instead.
All invocations use 8 anyway, so no effective change at present.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Simon Horman <horms@verge.net.au>
Link: https://patch.msgid.link/20260403-dev-mctp-fix-test-addr-v1-1-b7fa789cdd9b@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
batadv_bla_add_claim() can replace claim->backbone_gw and drop the old
gateway's last reference while readers still follow the pointer.
The netlink claim dump path dereferences claim->backbone_gw->orig and
takes claim->backbone_gw->crc_lock without pinning the underlying
backbone gateway. batadv_bla_check_claim() still has the same naked
pointer access pattern.
Reuse batadv_bla_claim_get_backbone_gw() in both readers so they operate
on a stable gateway reference until the read-side work is complete.
This keeps the dump and claim-check paths aligned with the lifetime
rules introduced for the other BLA claim readers.
Fixes: 23721387c4 ("batman-adv: add basic bridge loop avoidance code")
Fixes: 04f3f5bf18 ("batman-adv: add B.A.T.M.A.N. Dump BLA claims via netlink")
Cc: stable@vger.kernel.org
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Haoze Xie <royenheart@gmail.com>
Signed-off-by: Ao Zhou <n05ec@lzu.edu.cn>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Currently, the condition 'page->pp_magic == PP_SIGNATURE' is used to
determine if a page belongs to a page pool. However, with the planned
removal of @pp_magic, we should instead leverage the page_type in struct
page, such as PGTY_netpp, for this purpose.
Introduce and use the page type APIs e.g. PageNetpp(), __SetPageNetpp(),
and __ClearPageNetpp() instead, and remove the existing APIs accessing
@pp_magic e.g. page_pool_page_is_pp(), netmem_or_pp_magic(), and
netmem_clear_pp_magic().
Plus, add @page_type to struct net_iov at the same offset as struct page
so as to use the page_type APIs for struct net_iov as well. While at it,
reorder @type and @owner in struct net_iov to avoid a hole and increasing
the struct size.
This work was inspired by the following link:
https://lore.kernel.org/all/582f41c0-2742-4400-9c81-0d46bf4e8314@gmail.com/
While at it, move the sanity check for page pool to on the free path.
[byungchul@sk.com: gate the sanity check, per Johannes]
Link: https://lkml.kernel.org/r/20260316223113.20097-1-byungchul@sk.com
Link: https://lkml.kernel.org/r/20260224051347.19621-1-byungchul@sk.com
Co-developed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Byungchul Park <byungchul@sk.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: David Wei <dw@davidwei.uk>
Cc: Dragos Tatulea <dtatulea@nvidia.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: Mark Bloch <mbloch@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Stanislav Fomichev <sdf@fomichev.me>
Cc: Stehen Rothwell <sfr@canb.auug.org.au>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Cc: Tariq Toukan <tariqt@nvidia.com>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
