mirror of
https://github.com/torvalds/linux.git
synced 2026-09-28 20:12:01 +02:00
master
16556 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Ivan Vecera
|
0cc8348a97 |
dpll: add DPLL_PIN_TYPE_INT_NCO pin type
Add DPLL_PIN_TYPE_INT_NCO pin type for virtual pins representing the NCO mode of a DPLL. When connected as a DPLL input, the DPLL enters NCO mode where the output frequency is adjusted by the host via the PTP clock interface. Update the fractional-frequency-offset and fractional-frequency- offset-ppt attribute documentation to note that for INT_NCO pins these attributes represent the DPLL's current output frequency offset from its nominal frequency. Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Link: https://patch.msgid.link/20260630125536.720717-3-ivecera@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Ivan Vecera
|
b1d0c41208 |
dpll: add STATE_CONNECTED_OVERRIDE pin capability
Add DPLL_PIN_CAPABILITIES_STATE_CONNECTED_OVERRIDE capability flag that indicates a pin can be set to connected regardless of the current DPLL device mode, overriding the active input selection. This is useful for automatic-only DPLL devices where mode cannot be switched to manual, allowing userspace to directly connect such pin from automatic mode. The capability requires STATE_CAN_CHANGE to be set as well; dpll_pin_register() warns if a driver violates this. Document the new capability in the Pin selection section of Documentation/driver-api/dpll.rst. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Link: https://patch.msgid.link/20260630125536.720717-2-ivecera@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Johannes Berg
|
f83378e6ce |
wifi: nl80211: clarify NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA content
This is currently __le16, but really the whole content of the corresponding 802.11 element, which is even extensible and could, in theory, be increased in size. Clarify the docs. Link: https://patch.msgid.link/20260615093948.0f730833a6d5.I1c8c5c09dfe16b0b1dcb10d54fc030f6b1d4fc8c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Priyansha Tiwari
|
010e955c20 |
wifi: cfg80211/nl80211: add STA-mode peer probing
Add NL80211_EXT_FEATURE_PROBE_AP to allow drivers to advertise support for probing the associated AP from STA/P2P-client mode. Extend nl80211_probe_peer() to accept STA/P2P-client interfaces when the driver advertises NL80211_EXT_FEATURE_PROBE_AP; in that case the MAC attribute must be omitted (the peer is implied by the association). Update cfg80211_probe_status() to accept an optional peer address and a link_id parameter (-1 for non-MLO), and include NL80211_ATTR_MLO_LINK_ID in the event when link_id >= 0. Update all callers. Signed-off-by: Priyansha Tiwari <priyansha.tiwari@oss.qualcomm.com> Link: https://patch.msgid.link/20260611062225.2144241-3-pritiwa@qti.qualcomm.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Priyansha Tiwari
|
4ab9b637b9 |
wifi: nl80211/cfg80211: rename probe_client to probe_peer
Rename NL80211_CMD_PROBE_CLIENT to NL80211_CMD_PROBE_PEER in the UAPI enum and retain NL80211_CMD_PROBE_CLIENT as a compatibility alias. Rename the .probe_client cfg80211_ops callback to .probe_peer and update all in-tree users (wil6210, mwifiex) and mac80211 so the tree continues to build after this change. Signed-off-by: Priyansha Tiwari <priyansha.tiwari@oss.qualcomm.com> Link: https://patch.msgid.link/20260611062225.2144241-2-pritiwa@qti.qualcomm.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Rafael Passos
|
3a8bfa1f2a
|
drm/xe: Documentation: fix chars used for subsection
Fixes "ERROR: A level 2 section cannot be used here". Equal signs are reserved for document titles. This file docs gets imported by driver-uapi.rst, and the page title is defined there. Signed-off-by: Rafael Passos <rafael@rcpassos.me> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Link: https://patch.msgid.link/20260701012141.167868-1-rafael@rcpassos.me Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> [Rodrigo modified the subject while pushing it] |
||
|
Vijendar Mukunda
|
08c5e98b7b
|
ASoC: SOF: amd: add ACP I2S format field and topology token
Add format field to sof_ipc_dai_acp_params for ACP I2S format selection. Add SOF_TKN_AMD_ACPI2S_FORMAT (1703) to the existing SOF_ACPI2S_TOKENS tuple and wire it into acpi2s_tokens[] so integrators continue using the same ACPI2S token group as earlier ACP I2S topologies, not a separate ACPTDM-specific token set. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://patch.msgid.link/20260701095759.1012929-15-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Yuyang Huang
|
7cb8198761 |
net: ipv4: report multicast group user count
RTM_GETMULTICAST has been part of the rtnetlink ABI for a long time and already reports IPv4 multicast group membership through IFA_MULTICAST and IFA_CACHEINFO. It does not report how many consumers hold each membership, so userspace still has to parse /proc/net/igmp to get the Users column. Add IFA_MC_USERS as a u32 attribute carrying ip_mc_list::users in RTM_GETMULTICAST replies and entry-lifecycle notifications. This gives iproute2 enough information to migrate the IPv4 part of "ip maddr show" from procfs parsing to rtnetlink. Signed-off-by: Yuyang Huang <sigefriedhyy@gmail.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260630110207.37841-2-sigefriedhyy@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Jiri Olsa
|
859055e076 |
bpf: Add tracing_multi link info support
Adding BPF_OBJ_GET_INFO_BY_FD support for tracing_multi links. We expose following tracing_multi link data: - attach_type of the program - number of ids - array of BTF ids - array of its related kernel addresses - array of cookies The change follows the kprobe_multi and uprobe_multi link-info convention of optional output arrays with an in/out count, On top of standard tracing link data we also expose addresses, because they are useful info for user (especially when the attachment was done via pattern). This data is hidden when kallsyms does not allow exposing kernel pointer values. Assisted-by: Codex:GPT-5 Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Leon Hwang <leon.hwang@linux.dev> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20260629212208.895962-2-jolsa@kernel.org |
||
|
Tao Cui
|
5911f6d6e7 |
RDMA/nldev: Add resource summary max values for usage display
Add RDMA_NLDEV_ATTR_RES_SUMMARY_ENTRY_MAX netlink attribute to expose device resource limits (max_qp, max_cq, max_mr, max_pd, max_srq) in the resource summary alongside the existing current count. This allows userspace tools like iproute2's rdma to display resource usage in curr/max format. Expected output from "rdma resource show": Before: 0: mlx5_0: qp 123 cq 45 mr 200 pd 10 After: 0: mlx5_0: qp 123/131072 cq 45/65536 mr 200/1000000 pd 10/32768 In JSON output, both "curr" and "max" fields will be provided so that scripts can compute percentages if needed. The new attribute is optional and backward compatible - old userspace tools will simply ignore it. Signed-off-by: Tao Cui <cuitao@kylinos.cn> Link: https://patch.msgid.link/20260615003646.168704-1-cui.tao@linux.dev Signed-off-by: Leon Romanovsky <leon@kernel.org> |
||
|
Thomas Zimmermann
|
827b9aabd3 |
Merge drm/drm-next into drm-misc-next
Backmerging to get drm-misc-next to v7.2-rc1. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> |
||
|
Chenyu Chen
|
1258f9c9ff |
drm/edid: parse panel type from DisplayID 2.x Display Parameters
Parse the Display Parameters Data Block (tag 0x21) defined in DisplayID v2.1a Section 4.2.6. Extract the Display Device Technology field from the color depth and device technology byte, which indicates whether the panel uses LCD or OLED technology. Add a panel_type field to struct drm_display_info and populate it during DisplayID iteration so downstream drivers can use it for panel-type-dependent behavior. Add DRM_MODE_PANEL_TYPE_LCD to the UAPI panel type property alongside the existing OLED value. Assisted-by: Copilot:Claude-Opus-4.6 Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Link: https://patch.msgid.link/20260526030254.1460480-3-chen-yu.chen@amd.com Signed-off-by: Mario Limonciello <superm1@kernel.org> |
||
|
Matthew Wilcox (Oracle)
|
969076f31b
|
efs: Remove EFS
The kernel EFS code has been unmaintained for over twenty years. It was superseded on IRIX around thirty years ago. I haven't seen an EFS filesystem in the wild since 1999. Userspace tools to read EFS filesystems exist, such as https://github.com/jkbenaim/efsextract There's no benefit to keeping this filesystem in the kernel, and it only increases the maintenance burden for tree-wide changes. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://patch.msgid.link/20260618211822.3599089-1-willy@infradead.org Acked-by: Jori Koolstra <jkoolstra@xs4all.nl> Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org> |
||
|
Jordan Rife
|
509ca545d4 |
bpf: Support BPF_F_EGRESS with bpf_redirect_peer
We have several use cases where a pod injects traffic into the datapath of another so that the traffic appears to have originated from that pod. One such use case is a synthetic flow generator which injects synthetic traffic into a pod's datapath to enable dynamic probing and debugging. Another is a transparent proxy where connections originating from one pod are redirected towards another which proxies that connection. The new connection is bound to the IP of the original pod using IP_TRANSPARENT and its traffic is injected into that pod's datapath and handled as if it had originated there. This can be used for mTLS, etc. We use bpf_redirect(BPF_F_INGRESS) to direct traffic leaving the proxy, flow generator, etc. towards the target pod, ensuring that eBPF programs that are meant to intercept traffic leaving that pod are executed. However, this doesn't work with netkit. With netkit, an ingress redirection from proxy to workload skips eBPF programs that are meant to intercept traffic leaving the pod, since they reside on the netkit peer device. One workaround is to attach the same program to both the netkit peer device and the TCX ingress hook for the netkit pair's primary interface, but a) This seems hacky and we need to be careful not to run the same program twice for the same skb in cases where we want to pass that traffic to the host stack. b) We're trying to keep the proxy redirection / traffic injection systems as modular and separated from Cilium as possible, the system that manages netkit setup and core eBPF programming. It would be handy if instead we could redirect traffic directly from one netkit peer device to another. This patch proposes an extension to bpf_redirect_peer to allow us to do just that. With this patch, the BPF_F_EGRESS flag tells bpf_redirect_peer to emit the skb in the egress direction of the target interface's peer device While the main use case is netkit, I suppose you could also use this mode with veth as well if, e.g., there were some eBPF programs attached to that side of the veth pair that needed to intercept traffic. +---------------------------------------------------------------------+ | +-------------------------+ 6. bpf_redirect_neigh(eth0) | | | pod (10.244.0.10) | ------------------------ | | | | | | | | | +--------+ | | +---------+ | | | | 1. packet -->| | | | | | | | | | leaves ^ | netkit |<===========|======| netkit | | | | | | | peer |=======(eBPF)=====>| primary | | | | | | | | | | | | | | | | | +--------+ | | +---------+ | | | | | | | 2. bpf_redirect v | | +-----------|-------------+ |___________________ +-------| | | | | eth0 | | | 5. bpf_redirect_peer(BPF_F_EGRESS) | +-------| | |________________________ | | | +-------------------------+ | | | | | proxy (10.244.0.11) | | | | | | IP_TRANSPARENT | | | | | | +--------+ | | +---------+ | | | | 3. packet <--| | | | | |<-- | | | enters | netkit |<===========|======| netkit | | | | [proxy] | peer |=======(eBPF)=====>| primary | | | | 4. packet -->| | | | | | | | leaves +--------+ | +---------+ | | | sip=10.244.0.10 | | | +-------------------------+ | +---------------------------------------------------------------------+ Using the proxy use case as an example, in step 5 we would redirect traffic leaving the proxy towards the pod's peer device using bpf_redirect_peer(BPF_F_EGRESS). As a bonus, since the skb doesn't have to go through the backlog queue it can take full advantage of netkit's performance benefits. I set up a test where outgoing iperf3 traffic is injected into the datapath of another pod using either bpf_redirect_peer(BPF_F_EGRESS) or bpf_redirect(BPF_F_INGRESS). I used Cilium's eBPF host routing mode which skips the host stack and uses BPF redirect helpers to do all the routing. (net.ipv4.tcp_congestion_control=cubic,mtu=1500,100GiB link,Cilium eBPF host routing mode) BASELINE [bpf_redirect(BPF_F_INGRESS)] 1. [iperf pod] ==bpf_redirect([pod b], BPF_F_INGRESS)==> [pod b] 2. [pod b] ==bpf_redirect_neigh([eth0])==> eth0 3. eth0 ==over network==> [host b] [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-60.00 sec 231 GBytes 33.0 Gbits/sec 12060 sender [ 5] 0.00-60.00 sec 230 GBytes 33.0 Gbits/sec receiver TEST [bpf_redirect_peer(BPF_F_EGRESS)] 1. [iperf pod] ==bpf_redirect_peer([pod b], BPF_F_EGRESS)==> [pod b] 2. [pod b] ==bpf_redirect_neigh([eth0])==> eth0 3. eth0 ==over network==> [host b] [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-60.00 sec 272 GBytes 38.9 Gbits/sec 0 sender [ 5] 0.00-60.00 sec 272 GBytes 38.9 Gbits/sec receiver In this test, using bpf_redirect_peer(BPF_F_EGRESS) for the hop from [iperf pod] to [pod b] led to ~18% more throughput compared to bpf_redirect(BPF_F_INGRESS). Signed-off-by: Jordan Rife <jordan@jrife.io> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Paul Chaignon <paul.chaignon@gmail.com> Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev> Link: https://lore.kernel.org/r/20260618182035.43811-2-jordan@jrife.io Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Linus Torvalds
|
805185b7c7 |
Including fixes from netfilter and IPsec.
Current release - regressions:
- net: do not acquire dev->tx_global_lock in netdev_watchdog_up()
- net: ethtool: keep rtnl_lock for ops using ethtool_op_get_link()
- net: fix deadlock in nested UP notifier events
Current release - new code bugs:
- eth: cn20k: fix subbank free list indexing for search order
- eth: airoha: fix BQL underflow in shared QDMA TX ring
Previous releases - regressions:
- netfilter:
- flowtable: fix offloaded ct timeout never being extended
- nf_conncount: prevent connlimit drops for early confirmed ct
Previous releases - always broken:
- require CAP_NET_ADMIN in the originating netns when modifying
cross-netns devices
- report NAPI thread PID in the caller's pid namespace
- mac802154: fix dirty frag in in-place crypto for IOT radios
- sctp: hold socket lock when dumping endpoints in sctp_diag,
avoid an overflow
- eth: gve: fix header buffer corruption with header-split and HW-GRO
- af_key: initialize alg_key_len for IPComp states, prevent OOB read
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmo9ZaUACgkQMUZtbf5S
IrtO5w/+JgRT+RjKiCCLsEUM1R9hCA2Hxhos99YFpmMZitU2v3IZIdD/sZL6Ppxa
fq7hlsfMicF/isez+sharJ8H8NrX5MZ9YtvcbbRG2+aUPlAJDVSfxbqCcsjEMqdP
s4wtAhUoPwIVpw/rwcSSubQrGFTJlshVi1Yp48xxNHzNAk1wNoitSeKS+lAToaJf
6ZUl9uamxrbMG8j9FBOSWeOcQ2ywmrQiSGbRy74X0qolRfS+1r0pNchwGsv8s2RP
Sa3an4qfD3vBV0YNh8KglycBuvU6LMAt90/XIZ6zY8TBzISyM9PgrQbcNqKMlxQ0
LNPy5qosWvIEFVBjrUlw1IyyfSWOBnybwXViIE83/x/sUTyhRX4vnn20hdNlMyB2
FkWfU1C/X+D/idSoynCXGY4VXq7ikkfvTOXlTGcd9Q8sse98sQV+TpeVdu5gkqX8
KvjhIM896Kt4eVHkmVQ0DCu+GN8srbzmMCoPqBv04zfQX4rk9tWH4iyMIaNgniZe
8SrgFg3IA/WoaIU+Ac3oc2LNCf0XbeNQXMSfTu5t3H1bXgteDzdar/ncNXaPx/S2
72kP35DooMpgApP4TbpxiPZ1bVSfFK7mtoxxdHQVZVGwo9NY1Fz2eqpG28y/pk18
RXn2GSfeEmzsPGRYte+09QkwoaDnRj5GZ2ETbVxibPmJ71t6Iz0=
=dIVQ
-----END PGP SIGNATURE-----
Merge tag 'net-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and IPsec.
Current release - regressions:
- do not acquire dev->tx_global_lock in netdev_watchdog_up()
- ethtool: keep rtnl_lock for ops using ethtool_op_get_link()
- fix deadlock in nested UP notifier events
Current release - new code bugs:
- eth:
- cn20k: fix subbank free list indexing for search order
- airoha: fix BQL underflow in shared QDMA TX ring
Previous releases - regressions:
- netfilter:
- flowtable: fix offloaded ct timeout never being extended
- nf_conncount: prevent connlimit drops for early confirmed ct
Previous releases - always broken:
- require CAP_NET_ADMIN in the originating netns when modifying
cross-netns devices
- report NAPI thread PID in the caller's pid namespace
- mac802154: fix dirty frag in in-place crypto for IOT radios
- sctp: hold socket lock when dumping endpoints in sctp_diag, avoid
an overflow
- eth: gve: fix header buffer corruption with header-split and HW-GRO
- af_key: initialize alg_key_len for IPComp states, prevent OOB read"
* tag 'net-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (213 commits)
selftests: bonding: add a test for VLAN propagation over a bonded real device
vlan: defer real device state propagation to netdev_work
net: add the driver-facing netdev_work scheduling API
net: turn the rx_mode work into a generic netdev_work facility
net: ethtool: keep rtnl_lock for ops using ethtool_op_get_link()
rxrpc: Fix rxrpc_rotate_tx_rotate() to check there's something to rotate
rxrpc: Fix leak of released call in recvmsg(MSG_PEEK)
rxrpc: Fix socket notification race
rxrpc: Fix potential infinite loop in rxrpc_recvmsg()
rxrpc: Fix oob challenge leak in cleanup after notification failure
rxrpc: Fix the reception of a reply packet before data transmission
afs: Fix uncancelled rxrpc OOB message handler
afs: Fix further netns teardown to cancel the preallocation charger
rxrpc: Fix double unlock in rxrpc_recvmsg()
rxrpc: Fix leak of connection from OOB challenge
rxrpc: Fix ACKALL packet handling
net: hns3: differentiate autoneg default values between copper and fiber
net: hns3: fix permanent link down deadlock after reset
net: hns3: refactor MAC autoneg and speed configuration
net: hns3: unify copper port ksettings configuration path
...
|
||
|
Linus Torvalds
|
e161101787 |
Input updates for v7.2-rc0
- A new driver for Wacom W9000-series penabled touchscreens - Updates to STM FTS driver adding support for reset line and preparing the driver for STMFTS5 support - Updates to RMI4 and IMS PCU drivers hardening the code - Support for half-duplex mode restored in ADS7846 driver - Updates to driver's device_id tables to use named initializers - Removal of no longer used PCAP keys and touchscreen drivers (support for the ezx series of phones was removed in 2022) - Removal of xilinx_ps2 driver which is no longer used either - Updates to userio to allow setting up additional serio port characteristics (such as id, extra and proto) - Assorted hardening and cleanup fixes for other drivers. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCajs+4wAKCRBAj56VGEWX nN+EAQDaknpx+XZLU28jQqm4mK2BZde1cbtZ9/D7VS3n50by9AD/e+Tr3aqDAjTs hmDqdkrBIo8YlvlCvq4dosAKBH8gXA0= =nZiu -----END PGP SIGNATURE----- Merge tag 'input-for-v7.2-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - A new driver for Wacom W9000-series penabled touchscreens - Updates to STM FTS driver adding support for reset line and preparing the driver for STMFTS5 support - Updates to RMI4 and IMS PCU drivers hardening the code - Support for half-duplex mode restored in ADS7846 driver - Updates to driver's device_id tables to use named initializers - Removal of no longer used PCAP keys and touchscreen drivers (support for the ezx series of phones was removed in 2022) - Removal of xilinx_ps2 driver which is no longer used either - Updates to userio to allow setting up additional serio port characteristics (such as id, extra and proto) - Assorted hardening and cleanup fixes for other drivers * tag 'input-for-v7.2-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (72 commits) Input: mms114 - fix touch indexing for MMS134S and MMS136 Input: elan_i2c - prevent division by zero and arithmetic underflow Input: stop force-feedback timer when unregistering input devices Input: iforce - bound the device-reported force-feedback effect index Input: goodix - clamp the device-reported contact count Input: mms114 - reject an oversized device packet size Input: touchwin - reset the packet index on every complete packet Input: rmi4 - update formatting in F12 Input: rmi4 - propagate proper error code in F12 sensor tuning Input: rmi4 - simplify size calculations in F12 Input: rmi4 - use sizeof(*ptr) and idiomatic checks in f12 allocators Input: rmi4 - use devm_kmalloc for F12 data packet buffer Input: rmi4 - use flexible array member for IRQ masks in F12 Input: rmi4 - use unaligned access helpers in F12 Input: rmi4 - change reg_size type to u32 Input: rmi4 - refactor F12 probe function Input: rmi4 - use kzalloc_flex() for struct rmi_function Input: rmi4 - refactor function allocation and registration Input: rmi4 - use local presence map in rmi_read_register_desc() Input: rmi4 - fix limit in rmi_register_desc_has_subpacket() ... |
||
|
Linus Torvalds
|
0000d9ccbc |
Char/Misc/IIO/FPGA/GPIB/etc driver updates for 7.2-rc1
Here is the big set of char, misc, iio, fpga, and other small driver subsystems changes for 7.2-rc1. Lots of little stuff in here, the majority being of course the IIO driver updates, as a list they are: - IIO driver updates and additions - GPIB driver bugfixes and cleanups - Android binder driver updates (rust and C version) - counter driver updates - MHI driver updates - mei driver updates - w1 driver updates - interconnect driver updates - Comedi driver fixes and updates - some obsolete char drivers removed (applicom and dtlk) - hwtracing driver updates - other tiny driver updates All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCajk4Gg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yl89wCdG1WBLsvKHZ3zaFWd4POE8G/gS1YAnRf0GcRB 0F1/iBXSZLaRF/p9dsGq =fg13 -----END PGP SIGNATURE----- Merge tag 'char-misc-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull misc driver updates from Greg KH: "Here is the big set of char, misc, iio, fpga, and other small driver subsystems changes for 7.2-rc1. Lots of little stuff in here, the majority being of course the IIO driver updates, as a list they are: - IIO driver updates and additions - GPIB driver bugfixes and cleanups - Android binder driver updates (rust and C version) - counter driver updates - MHI driver updates - mei driver updates - w1 driver updates - interconnect driver updates - Comedi driver fixes and updates - some obsolete char drivers removed (applicom and dtlk) - hwtracing driver updates - other tiny driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits) w1: ds2482: Use named initializers for arrays of i2c_device_data firmware: stratix10-svc: Add support to query Arm Trusted Firmware (ATF) version firmware: stratix10-rsu: avoid blocking reboot_image sysfs when busy coresight: ultrasoc-smb: Fix OOB write in smb_sync_perf_buffer() iio: adc: nxp-sar-adc: harden buffer ISR against per-channel read failure iio: chemical: scd30: Replace manual locking with RAII locking iio: light: tsl2591: remove unneeded tsl2591_compatible_als_persist_cycle() iio: dac: ad5686: create bus ops struct iio: dac: ad5686: cleanup doc header of local structs iio: dac: ad5686: add control_sync() for single-channel devices iio: dac: ad5686: add helpers to handle powerdown masks iio: dac: ad5686: add of_match table to the spi driver iio: dac: ad5686: drop enum id iio: dac: ad5686: remove redundant register definition iio: dac: ad5686: refactor include headers iio: adc: ad4080: fix AD4880 chip ID iio: light: veml3328: add support for new device dt-bindings: iio: light: veml6030: add veml3328 fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header() fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region() ... |
||
|
Linus Torvalds
|
8a500fd093 |
TTY / Serial driver update for 7.2-rc1
Here is the big set of TTY and Serial driver updates for 7.2-rc1. Overall we end up removing more code than added, due to an obsolete synclink_gt driver being removed from the tree, always a nice thing to see happen. Other than that driver removal, major things included in here are: - max310x serial driver updates and fixes - 8250 driver updates and rework in places to make it more "modern" - dts file updates - serial driver core tweaks and updates - vt code cleanups - vc_screen crash fixes - other minor driver updates and cleanups All of these have been in linux-next for well over a week with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCajk2xQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymyewCeKSdE2vNK6LQz9hdev9qBh/J0n7oAn091vfYP i9C0vxEB+sS9vMsRAro5 =14Tn -----END PGP SIGNATURE----- Merge tag 'tty-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the big set of TTY and Serial driver updates for 7.2-rc1. Overall we end up removing more code than added, due to an obsolete synclink_gt driver being removed from the tree, always a nice thing to see happen. Other than that driver removal, major things included in here are: - max310x serial driver updates and fixes - 8250 driver updates and rework in places to make it more "modern" - dts file updates - serial driver core tweaks and updates - vt code cleanups - vc_screen crash fixes - other minor driver updates and cleanups All of these have been in linux-next for well over a week with no reported issues" * tag 'tty-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (49 commits) serial: 8250_pci: Don't specify conflicting values to pci_device_id members vc_screen: fix null-ptr-deref in vcs_notifier() during concurrent vcs_write serial: qcom_geni: Fix RX DMA stall when SE_DMA_RX_LEN_IN is zero vt: merge ucs_is_zero_width()/ucs_is_double_width() into ucs_get_width() serial: 8250: fix possible ISR soft lockup dt-bindings: serial: rs485: remove deprecated .txt binding stub serial: qcom-geni: trace: Add tracepoint support for Qualcomm GENI serial tty: serial: Use named initializers for arrays of i2c_device_data serial: 8250_dw: remove clock-notifier infrastructure serial: 8250_dw: unregister 8250 port if clk_notifier_register() fails amba/serial: amba-pl011: Bring back zx29 UART support serial: 8250: Add support for console flow control serial: 8250: Check LSR timeout on console flow control serial: 8250: Set cons_flow on port registration tty: serial: 8250: protect against NULL uart->port.dev in register arm64: dts: add support for A9 based Amlogic BY401 dt-bindings: arm: amlogic: add A311Y3 support serial: max310x: fix compile errors if CONFIG_SPI_MASTER is disabled serial: qcom-geni: Avoid probing debug console UART without console support serial: max310x: add comments for PLL limits ... |
||
|
Riana Tauro
|
cdeb5e248d |
drm/xe/uapi: Add additional error components to xe drm_ras
Add additional Error components supported by XE drm_ras (Reliability, Availability and Serviceability). Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com> Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patch.msgid.link/20260618060633.2790109-9-riana.tauro@intel.com Signed-off-by: Riana Tauro <riana.tauro@intel.com> |
||
|
Linus Torvalds
|
d639d9fa16 |
liveupdate: updates for 7.2-rc1
- kho: make memory preservation compatible with deferred initialization of
the memory map
- luo: add LIVEUPDATE_SESSION_GET_NAME ioctl and parameter verification for
LIVEUPDATE_IOCTL_CREATE_SESSION ioctl
- luo: documentation updates for liveupdate=on command line option, systemd
support and the current compatibility status
- luo: remove the fixed limits on the number of files that can be preserved
within a single session, and the total number of sessions managed by the
Live Update Orchestrator
- fixes that didn't cut as urgent and were delayed until the merge window:
* reference count incoming File-Lifecycle-Bound (FLB) data so it cannot
be freed while a subsystem is still using it
* fixes for a TOCTOU race in luo_session_retrieve(), a use-after-free in
the file finish and unpreserve paths, concurrent session mutations
during reboot and serialization on preserve_context kexec
* make sure ioctls for incoming LUO sessions are blocked for outgoing
sessions and vice versa
* make sure KHO scratch size is always aligned by CMA_MIN_ALIGNMENT_BYTES
* fix memblock tests build issue introduced by KHO changes
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmo315YACgkQOQOGJssO
/ZE1SQf/e+ETXoC/oAhg7aIR8HM8NRWxgp1Ira6fpLJ0IvUlPQSE3yumLaVUymg3
T3mK+b0BbIEjb6QT4/+UQEFnh01C+opxceghjCc2z6HIsp2Y/VCXnZNj31FWrspZ
yWAVkhppHwEpA6z45jDM6ua8KI5V3TwyZ15xxCUewVYSKqw7GrvijHlAowAa5H3n
elwqfjjiooGnDKTrcjpVJj7Qix9LRf0OJhGqlip5np8TW9S/pU3gT7g304iQEgSj
GiDs/3vmOkV82HV5ifAgv21Tjs4bCQi1hk9f8SpgF10onnhokSp2/uzVmfqYqcxx
hvANOdCBUoO4FzIg/9uBriSynGzYbw==
=urD+
-----END PGP SIGNATURE-----
Merge tag 'liveupdate-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux
Pull liveupdate updates from Mike Rapoport:
"Kexec Handover (KHO):
- make memory preservation compatible with deferred initialization
of the memory map
Live Update Orchestrator (LUO):
- add LIVEUPDATE_SESSION_GET_NAME ioctl and parameter verification
for LIVEUPDATE_IOCTL_CREATE_SESSION ioctl
- documentation updates for liveupdate=on command line option,
systemd support and the current compatibility status
- remove the fixed limits on the number of files that can be
preserved within a single session, and the total number of
sessions managed by the LUO
Misc fixes:
- reference count incoming File-Lifecycle-Bound (FLB) data so
it cannot be freed while a subsystem is still using it
- fixes for a TOCTOU race in luo_session_retrieve(), a use-
after-free in the file finish and unpreserve paths, concurrent
session mutations during reboot and serialization on
preserve_context kexec
- make sure ioctls for incoming LUO sessions are blocked for
outgoing sessions and vice versa
- make sure KHO scratch size is always aligned by
CMA_MIN_ALIGNMENT_BYTES
- fix memblock tests build issue introduced by KHO changes"
* tag 'liveupdate-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux: (36 commits)
liveupdate: Document that retrieve failure is permanent
docs: memfd_preservation: fix rendering of ABI documentation
selftests/liveupdate: Add stress-files kexec test
selftests/liveupdate: Add stress-sessions kexec test
selftests/liveupdate: Test session and file limit removal
liveupdate: Remove limit on the number of files per session
liveupdate: Remove limit on the number of sessions
liveupdate: defer session block allocation and physical address setting
kho: add support for linked-block serialization
liveupdate: Extract luo_session_deserialize_one helper
liveupdate: Extract luo_file_deserialize_one helper
liveupdate: register luo_ser as KHO subtree
liveupdate: centralize state management into struct luo_ser
liveupdate: avoid mixing cleanup guards with goto in luo_session_retrieve_fd
liveupdate: change file_set->count type to u64 for type safety
liveupdate: Remove unused ser field from struct luo_session
liveupdate: fix u-a-f in luo_file_unpreserve_files() and luo_file_finish()
liveupdate: block session mutations during reboot
liveupdate: fix TOCTOU race in luo_session_retrieve()
liveupdate: skip serialization for context-preserving kexec
...
|
||
|
Pablo Neira Ayuso
|
b8b09dc2bf |
netfilter: nf_conntrack_expect: use conntrack GC to reap expectations
This patch replaces the timer API by GC worker approach for
expectations, as it already happened in many other subsystems.
Use the existing conntrack GC worker to iterate over the local list of
expectations in the master conntrack to reap expired expectations.
Check IPS_HELPER_BIT to run GC for expectations, set it on for nft_ct
expectation which nevers sets it. Hold the expectation spinlock while
iterating over the master conntrack expectation list to synchronize with
nf_ct_remove_expectations(). This also performs runtime packet path
garbage collection through the expectation insertion and lookup
functions while walking over one of the chains of the global expectation
hashtables. Unconfirmed conntrack entries are skipped since ct->ext can
be reallocated and dying are skipped since those will be gone soon.
Set on IPS_HELPER_BIT if the helper ct extension is added, then the new
GC worker does not need to bump the ct refcount to check if the ct->ext
helper is available.
This removes the extra bump on the refcount for expectation timers, this
allows to remove several nf_ct_expect_put() calls after the unlink,
after this update only refcount remains at 1 while on the expectation
hashes.
This patch implicitly addresses a race with the existing timer API
allowing an expectation to access a stale exp->master pointer which has
been already released when expectation removal loses races with an
expiring timer, ie. timer_del() reporting false.
Add a new NF_CT_EXPECT_DEAD flag to reap this expectation via GC. This
is needed by nf_conntrack_unexpect_related() which is called in error
paths to invalidate newly created expectations that has been added into
the hashes. These expectactions cannot be inmediately released as GC or
nf_ct_remove_expectations() could race to make it. On expectation
insert, the runtime GC reaps stale expectations before checking the
expectation limit set by policy.
Set current timestamp in nf_ct_expect_alloc(), then add the expectation
policy timeout (or custom timeout specified added on top of this) to
specify the expectation lifetime.
Fixes:
|
||
|
Linus Torvalds
|
5e2e14749c |
Landlock update for v7.2-rc1
-----BEGIN PGP SIGNATURE----- iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCajT1cxAcbWljQGRpZ2lr b2QubmV0AAoJEOXj0OiMgvbSAWcBAKtN0xWVNJM6jXj5q2EHO5vOFTvoLD9KNLsK 9FJoWN3dAQCWsuMI1OBovh6JguJ/jvwB2chwwa5NGxanhQ1LP9NyCg== =4cLz -----END PGP SIGNATURE----- Merge tag 'landlock-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux Pull landlock updates from Mickaël Salaün: "This adds new Landlock access rights to control UDP bind and connect/send operations, and a new "quiet" feature to mute specific specific audit logs (and other future observability events). A few commits also fix Landlock issues" * tag 'landlock-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: (24 commits) selftests/landlock: Add tests for invalid use of quiet flag selftests/landlock: Add tests for quiet flag with scope selftests/landlock: Add tests for quiet flag with net rules selftests/landlock: Add tests for quiet flag with fs rules selftests/landlock: Replace hard-coded 16 with a constant samples/landlock: Add quiet flag support to sandboxer landlock: Suppress logging when quiet flag is present landlock: Add API support and docs for the quiet flags landlock: Add a place for flags to layer rules landlock: Add documentation for UDP support samples/landlock: Add sandboxer UDP access control selftests/landlock: Add tests for UDP send selftests/landlock: Add tests for UDP bind/connect landlock: Add UDP send+connect access control landlock: Add UDP bind() access control landlock: Fix unmarked concurrent access to socket family selftests/landlock: Explicitly disable audit in teardowns selftests/landlock: Test SCOPE_SIGNAL on the SIGIO/fowner pgid path landlock: Fix LANDLOCK_SCOPE_SIGNAL bypass on the SIGIO path landlock: Demonstrate best-effort allowed_access filtering ... |
||
|
Linus Torvalds
|
c98d767b34 |
Arm:
"This is a bit of an odd merge window on the KVM/arm64 front. There is
absolutely no new feature in the pull request. It is purely fixes,
because it is simply becoming too hard to review new stuff when so
many AI-fuelled fixes hit the list".
- Significant cleanup of the vgic-v5 PPI support which was merged in
7.1. This makes the code more maintainable, and squashes a couple
of bugs in the meantime.
- Set of fixes for the handling of the MMU in an NV context,
particularly VNCR-triggered faults. S1POE support is fixed
as well.
- Large set of pKVM fixes, mostly addressing recurring issues
around hypervisor tracking of donated pages in obscure cases
where the donation could fail and leave things in a bizarre
state.
- Fixes for the so-called "lazy vgic init", which resulted in
sleeping operations in non-preemptible sections. This turned
out to be far more invasive than initially expected...
- Reduce the overhead of L1/L2 context switch by not touching
the FP registers.
- Fix the way non-implemented page sizes are dealt with when
a guest insist on using them for S2 translation.
- The usual set of low-impact fixes and cleanups all over the map.
Loongarch:
- On a request for lazy FPU load, load all FPU state that the VM
supports instead of enabling only the part (FPU, LSX or LASX)
that caused the FPU load request.
- Some enhancements about interrupt injection.
- Some bug fixes and other small changes.
RISC-V:
- Batch G-stage TLB flushes for GPA range based page table updates
- Convert HGEI line management to fully per-HART
- Fix missing CSR dirty marking when FWFT state updated via ONE_REG
- Fix stale FWFT feature exposure to Guest/VM
- Speed up dirty logging write faults using MMU rwlock and atomic
PTE updates using cmpxchg() for permission-only changes
- Use flexible array for APLIC IRQ state
- Use kvm_slot_dirty_track_enabled() for logging enable check on
a memslot
- Avoid skipping valid pages in kvm_riscv_gstage_wp_range()
- Avoid skipping valid pages in kvm_riscv_gstage_unmap_range()
- Use endian-specific __lelong for NACL shared memory
S390:
- KVM_PRE_FAULT_MEMORY support
- Support for 2G hugepages
- Support for the ASTFLEIE 2 facility
- Support for fast inject using kvm_arch_set_irq_inatomic
- Fix potential leak of uninitialized bytes
- A few more misc gmap fixes.
x86:
- Generic support for the more granular permissions allowed by EPT,
namely "read" (which was previously usurping the U bit) and
separate execution bits for kernel and userspace.
- Do not assume that all page tables start with U=1/W=1/NX=0 at the
root, as AMD GMET needs to have U=0 at the root.
- Introduce common assembly macros for use within Intel and AMD
vendor-specific vmentry code. This touches the SPEC_CTRL handling,
which is now entirely done in assembly for Intel (by reusing the
AMD code that already existed), and register save/restore which
uses some macro magic to compute the offsets in the struct. Both
of these are preparatory changes for upcoming APX support.
- Clean up KVM's register tracking and storage, primarily to prepare for
APX support, which expands the maximum number of GPRs from 16 to 32.
- Keep a single copy of the PDPTRs rather than two, since architecturally
there is just one.
- Handle EXIT_FASTPATH_EXIT_USERSPACE in vendor code to ensure vendor code
gets a chance to handle things like reaping the PML buffer.
- Update KVM's view of PV async enabling if and only if the MSR write fully
succeeds.
- Fix a variety of issues where the emulator doesn't honor guest-debug state,
and clean up related code along the way.
- Synthesize EPT Violation and #NPF "error code" bits when injecting faults
into L1 that didn't originate in hardware (in which case the VMCS/VMCB
doesn't hold relevant information).
- Add support for virtualizing (well, emulating) AMD's flavor of CPL>0 CPUID
faulting.
- Clean up the GPR APIs so that KVM's use of "raw" is consistent, and fix a
variety of minor bugs along the way.
- Fix an OOB memory access due to not checking the VP ID when handling a
Hyper-V PV TLB flush for L2.
- Fix a bug in the mediated PMU's handling of fixed counters that allowed the
guest to bypass the PMU event filter.
- Allow userspace to return EAGAIN when handling SNP and TDX hypercalls, so
the KVM can forward a "retry" status code to the guest, and reserve all
unused error codes for future usage.
- Overhaul the TDP MMU => S-EPT code to move as much S-EPT specific logic as
possible into the TDX code, and to funnel (almost) all S-EPT updates into
a single chokepoint. The motivation is largely to prepare for upcoming
Dynamic PAMT support, but the cleanups are nice to have on their own.
- Plug a hole in shadow page table handling, where KVM fails to recursively
zap nested EPT/NPT shadow page tables when the nested hypervisor tears
down its own EPT/NPT page tables from the bottom up
x86 (Intel):
- Support for nested MBEC (Mode-Based Execute Control), see above in the
generic section; also run with MBEC enabled even for non-nested mode.
- Use the kernel's "enum pg_level" in the TDX APIs instead of the TDX-Module's
level definitions (which are 0-based).
- Rework the TDX memory APIs to not require/assume that guest memory is
backed by "struct page" (in prepartion for guest_memfd hugepage support).
- Fix a largely benign bug where KVM TDX would incorrectly state it could
emulate several x2APIC MSRs.
- Use the "safe" WRMSR API when proxying LBR MSR writes as the to-be-written
value is guest controlled and completely unvalidated.
x86 (AMD):
- Support for nested GMET (Guest Mode Execution Trap), see above in the
generic section; also run with GMET enabled even for non-nested mode.
- Fixes and minor cleanups to GHCB handling, on top of the earlier work
already merged into 7.1-rc.
- Ensure KVM's copy of CR0 and CR3 are up-to-date prior to invoking
fastpath handlers.
- Add support for virtualizing gPAT (KVM previously just used L1's PAT when
running L2).
- Fix goofs where KVM mishandles side effects (e.g. single-step and PMC
updates) when emulating VMRUN.
- Fix a variety of bugs in AVIC's handling of x2APIC MSR interception, most
notably where KVM didn't disable interception of IRR, ISR, and TMR regs.
- Add support for virtualizing Host-Only/Guest-Only bits in the mediated PMU.
- Don't advertise support for unusable VM types, and account for VM types
that are disabled by firmware, e.g. to mitigate security vulnerabilities.
- Rewrite the SEV {en,de}crypt debug ioctls as they were riddle with bugs and
unnecessarily complicated, and add comprehensive tests.
- Clean up and deduplicate the SEV page pinning code.
- Fix minor goofs related to writing back CPUID information after firmware
rejects a CPUID page for an SNP vCPU.
Generic:
- Rename invalidate_begin() to invalidate_start() throughout KVM to follow
the kernel's nomenclature, e.g. for mmu_notifiers.
- Use guard() to cleanup up various KVM+VFIO flows.
- Minor cleanups.
guest_memfd:
- Return -EEXIST instead of -EINVAL if userspace attempts to bind a gmem
range to multiple memslots, and fix the test that was supposed to ensure
KVM returns -EEXIST.
- Treat memslot binding offsets and sizes as unsigned values to fix a bug
where KVM interprets a large "offset + size" as a negative value and allows
a nonsensical offset.
- Use the inode number instead of the page offset for the NUMA interleaving
index to fix a bug where the effective index would jump by two for
consecutive pages (the caller also adds in the page offset).
Selftests:
- Randomize the dirty log test's delay when reaping the bitmap on the first
pass, as always waiting only 1ms hid a KVM RISC-V bug as the test reaped the
bitmap before KVM could build up enough state to hit the bug.
- A pile of one-off fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmoypI0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNCSAf8CyuvicojnZGFsNcoY4DZ0whBj5l8
IwVkHaptuyGLSwPAebC/DwtU2NBY4CQdbtLjGmxenf+fSQOtcz1YWKbdY4Nr0hJG
euAb/wO47RqKp1C4WPi7lL2P4XHgmUgD5XZ1qDnRV9gnGddZi3QLLmKgAtNq9Z4m
+pAdGD2/RyZeI0Dx61+5ufE/z8YBlH6GrzgBTxfvvRNKqNDFykBenxYHI7seEfHC
BPz0LxjHDD8BMDUo86qaylZnaeQSmFTGO/eTgvCvabxG6WbM1s0w3K1owmUmP7o3
p9o8274Xh53iK2JYD/qGOtAJXejIwbYKT5bnvUQX0O1EH2+ouvSFapLQ9Q==
=sSqM
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"arm64:
This is a bit of an odd merge window on the KVM/arm64 front. There
is absolutely no new feature in the pull request. It is purely
fixes, because it is simply becoming too hard to review new stuff
when so many AI-fuelled fixes hit the list.
- Significant cleanup of the vgic-v5 PPI support which was merged in
7.1. This makes the code more maintainable, and squashes a couple
of bugs in the meantime
- Set of fixes for the handling of the MMU in an NV context,
particularly VNCR-triggered faults. S1POE support is fixed as well
- Large set of pKVM fixes, mostly addressing recurring issues around
hypervisor tracking of donated pages in obscure cases where the
donation could fail and leave things in a bizarre state
- Fixes for the so-called "lazy vgic init", which resulted in
sleeping operations in non-preemptible sections. This turned out to
be far more invasive than initially expected..
- Reduce the overhead of L1/L2 context switch by not touching the FP
registers
- Fix the way non-implemented page sizes are dealt with when a guest
insist on using them for S2 translation
- The usual set of low-impact fixes and cleanups all over the map
Loongarch:
- On a request for lazy FPU load, load all FPU state that the VM
supports instead of enabling only the part (FPU, LSX or LASX) that
caused the FPU load request
- Some enhancements about interrupt injection
- Some bug fixes and other small changes
RISC-V:
- Batch G-stage TLB flushes for GPA range based page table updates
- Convert HGEI line management to fully per-HART
- Fix missing CSR dirty marking when FWFT state updated via ONE_REG
- Fix stale FWFT feature exposure to Guest/VM
- Speed up dirty logging write faults using MMU rwlock and atomic PTE
updates using cmpxchg() for permission-only changes
- Use flexible array for APLIC IRQ state
- Use kvm_slot_dirty_track_enabled() for logging enable check on a
memslot
- Avoid skipping valid pages in kvm_riscv_gstage_wp_range()
- Avoid skipping valid pages in kvm_riscv_gstage_unmap_range()
- Use endian-specific __lelong for NACL shared memory
S390:
- KVM_PRE_FAULT_MEMORY support
- Support for 2G hugepages
- Support for the ASTFLEIE 2 facility
- Support for fast inject using kvm_arch_set_irq_inatomic
- Fix potential leak of uninitialized bytes
- A few more misc gmap fixes
x86:
- Generic support for the more granular permissions allowed by EPT,
namely "read" (which was previously usurping the U bit) and
separate execution bits for kernel and userspace
- Do not assume that all page tables start with U=1/W=1/NX=0 at the
root, as AMD GMET needs to have U=0 at the root
- Introduce common assembly macros for use within Intel and AMD
vendor-specific vmentry code. This touches the SPEC_CTRL handling,
which is now entirely done in assembly for Intel (by reusing the
AMD code that already existed), and register save/restore which
uses some macro magic to compute the offsets in the struct. Both of
these are preparatory changes for upcoming APX support
- Clean up KVM's register tracking and storage, primarily to prepare
for APX support, which expands the maximum number of GPRs from 16
to 32
- Keep a single copy of the PDPTRs rather than two, since
architecturally there is just one
- Handle EXIT_FASTPATH_EXIT_USERSPACE in vendor code to ensure vendor
code gets a chance to handle things like reaping the PML buffer
- Update KVM's view of PV async enabling if and only if the MSR write
fully succeeds
- Fix a variety of issues where the emulator doesn't honor
guest-debug state, and clean up related code along the way
- Synthesize EPT Violation and #NPF "error code" bits when injecting
faults into L1 that didn't originate in hardware (in which case the
VMCS/VMCB doesn't hold relevant information)
- Add support for virtualizing (well, emulating) AMD's flavor of
CPL>0 CPUID faulting
- Clean up the GPR APIs so that KVM's use of "raw" is consistent, and
fix a variety of minor bugs along the way
- Fix an OOB memory access due to not checking the VP ID when
handling a Hyper-V PV TLB flush for L2
- Fix a bug in the mediated PMU's handling of fixed counters that
allowed the guest to bypass the PMU event filter
- Allow userspace to return EAGAIN when handling SNP and TDX
hypercalls, so the KVM can forward a "retry" status code to the
guest, and reserve all unused error codes for future usage
- Overhaul the TDP MMU => S-EPT code to move as much S-EPT specific
logic as possible into the TDX code, and to funnel (almost) all
S-EPT updates into a single chokepoint. The motivation is largely
to prepare for upcoming Dynamic PAMT support, but the cleanups are
nice to have on their own
- Plug a hole in shadow page table handling, where KVM fails to
recursively zap nested EPT/NPT shadow page tables when the nested
hypervisor tears down its own EPT/NPT page tables from the bottom
up
x86 (Intel):
- Support for nested MBEC (Mode-Based Execute Control), see above in
the generic section; also run with MBEC enabled even for non-nested
mode
- Use the kernel's "enum pg_level" in the TDX APIs instead of the
TDX-Module's level definitions (which are 0-based)
- Rework the TDX memory APIs to not require/assume that guest memory
is backed by "struct page" (in prepartion for guest_memfd hugepage
support)
- Fix a largely benign bug where KVM TDX would incorrectly state it
could emulate several x2APIC MSRs
- Use the "safe" WRMSR API when proxying LBR MSR writes as the
to-be-written value is guest controlled and completely unvalidated
x86 (AMD):
- Support for nested GMET (Guest Mode Execution Trap), see above in
the generic section; also run with GMET enabled even for non-nested
mode
- Fixes and minor cleanups to GHCB handling, on top of the earlier
work already merged into 7.1-rc
- Ensure KVM's copy of CR0 and CR3 are up-to-date prior to invoking
fastpath handlers
- Add support for virtualizing gPAT (KVM previously just used L1's
PAT when running L2)
- Fix goofs where KVM mishandles side effects (e.g. single-step and
PMC updates) when emulating VMRUN
- Fix a variety of bugs in AVIC's handling of x2APIC MSR
interception, most notably where KVM didn't disable interception of
IRR, ISR, and TMR regs
- Add support for virtualizing Host-Only/Guest-Only bits in the
mediated PMU
- Don't advertise support for unusable VM types, and account for VM
types that are disabled by firmware, e.g. to mitigate security
vulnerabilities
- Rewrite the SEV {en,de}crypt debug ioctls as they were riddle with
bugs and unnecessarily complicated, and add comprehensive tests
- Clean up and deduplicate the SEV page pinning code
- Fix minor goofs related to writing back CPUID information after
firmware rejects a CPUID page for an SNP vCPU
Generic:
- Rename invalidate_begin() to invalidate_start() throughout KVM to
follow the kernel's nomenclature, e.g. for mmu_notifiers
- Use guard() to cleanup up various KVM+VFIO flows
- Minor cleanups
guest_memfd:
- Return -EEXIST instead of -EINVAL if userspace attempts to bind a
gmem range to multiple memslots, and fix the test that was supposed
to ensure KVM returns -EEXIST
- Treat memslot binding offsets and sizes as unsigned values to fix a
bug where KVM interprets a large "offset + size" as a negative
value and allows a nonsensical offset
- Use the inode number instead of the page offset for the NUMA
interleaving index to fix a bug where the effective index would
jump by two for consecutive pages (the caller also adds in the page
offset)
Selftests:
- Randomize the dirty log test's delay when reaping the bitmap on the
first pass, as always waiting only 1ms hid a KVM RISC-V bug as the
test reaped the bitmap before KVM could build up enough state to
hit the bug
- A pile of one-off fixes and cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (326 commits)
KVM: x86/mmu: Ensure hugepage is in by slot before checking max mapping level
KVM: x86: Fix shadow paging use-after-free due to unexpected role
KVM: s390: Introducing kvm_arch_set_irq_inatomic fast inject
KVM: s390: Enable adapter_indicators_set to use mapped pages
KVM: s390: Add map/unmap ioctl and clean mappings post-guest
riscv: kvm: Use endian-specific __lelong for NACL shared memory
KVM: selftests: access_tracking_perf_test: bump number of NUMA nodes to 32
KVM: s390: vsie: Implement ASTFLEIE facility 2
KVM: s390: vsie: Refactor handle_stfle
s390/sclp: Detect ASTFLEIE 2 facility
KVM: s390: Minor refactor of base/ext facility lists
KVM: x86/mmu: move pdptrs out of the MMU
KVM: x86: check that kvm_handle_invpcid is only invoked with shadow paging
KVM: nSVM: invalidate cached PDPTRs across nested NPT transitions
KVM: nVMX: remove unnecessary code in prepare_vmcs02_rare
KVM: x86: remove nested_mmu from mmu_is_nested()
KVM: arm64: vgic-its: Make ABI commit helpers return void
KVM: s390: Initialize KVM_S390_GET_CMMA_BITS memory
LoongArch: KVM: Add missing slots_lock for device register/unregister
LoongArch: KVM: Validate irqchip index in irqfd routing
...
|
||
|
Linus Torvalds
|
8c13415c8a |
[GIT PULL for v7.2] media updates
-----BEGIN PGP SIGNATURE-----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=Br7k
-----END PGP SIGNATURE-----
Merge tag 'media/v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- v4l2:
- core: fix subdev sensor ownership
- subdev: Allow accessing routes with STREAMS client capability
- ctrls: Add validation for HEVC active reference counts and
background detection control
- common: Add YUV24 format info and has_alpha helper
- vb2: Change vb2_read() and vb2_write() return types to ssize_t
- i2c: cvs: Add driver of Intel Computer Vision Sensing Controller(CVS)
- atmel-isc: remove deprecated driver
- cec: Add CEC Latency Indication Protocol (LIP) support
- imon: Add iMON VFD HID OEM v1.2 key mappings
- AVMatrix: new HWS capture driver
- isp4: new AMD capture driver
- qcom:
- iris: Add hierarchical coding, B-frame, and Long-Term Reference
support for encoder
- camss: Add SM6350 platform support
- venus: Add SM6115 platform support
- chips-media: wave5: Add support for Packed YUV422, CBP profile, and
background detection
- csi2rx: Add multistream support and 32 dma chans
- Several cleanups and fixes
* tag 'media/v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (394 commits)
media: v4l2-fwnode: Fix subdev owner overwritten in v4l2_async_register_subdev_sensor()
media: qcom: iris: vdec: allow GEN2 decoding into 10bit format
media: qcom: iris: vdec: update find_format to handle 8bit and 10bit formats
media: qcom: iris: vdec: update size and stride calculations for 10bit formats
media: qcom: iris: gen2: add support for 10bit decoding
media: qcom: iris: add QC10C & P010 buffer size calculations
media: qcom: iris: add helpers for 8bit and 10bit formats
media: qcom: iris: Fix FPS calculation and VPP FW overhead
media: qcom: camss: vfe-340: Support for PIX client
media: qcom: camss: vfe-340: Proper client handling
media: qcom: camss: csid-340: Enable PIX interface routing
media: qcom: camss: csid-340: Add port-to-interface mapping
media: qcom: camss: csid-340: Switch to generic CSID_CFG/CTRL registers
media: iris: Initialize HFI ops after firmware load in core init
media: iris: drop struct iris_fmt
media: iris: Add platform data for X1P42100
media: iris: Add hardware power on/off ops for X1P42100
media: iris: optimize COMV buffer allocation for VPU3x and VPU4x
media: iris: add FPS calculation and VPP FW overhead in frequency formula
media: qcom: iris: Simplify COMV size calculation
...
|
||
|
Linus Torvalds
|
3dc7c00116 |
NFSD 7.2 Release Notes
Jeff Layton wired up netlink upcalls for the auth.unix.ip and auth.unix.gid caches in SunRPC and the svc_export and nfsd.fh caches in NFSD. The new kernel-user API is more extensible and lays the groundwork for retiring the old pipe interface. The default NFS r/w block size rises to 4MB on hosts with at least 16GB of RAM, reducing per-RPC overhead on fast networks. Smaller machines keep their previously computed default, and the value remains tunable through /proc/fs/nfsd/max_block_size. Chuck Lever converted the server's RPCSEC GSS Kerberos code to the kernel's shared crypto/krb5 library. The conversion retires and removes SunRPC's bespoke implementation of Kerberos v5, but keeps RPCSEC GSS-API. Continuing the xdrgen migration that converted the NLMv4 server XDR layer in v7.1, Chuck Lever converted the NLM version 3 server-side XDR layer from hand-written C to xdrgen-generated code. As with the NLMv4 conversion in v7.1, the goals are improved memory safety, lower maintenance burden, and groundwork for generation of Rust code for this layer instead of C. Chuck Lever fixed an issue where lingering NFSv4 state pins a mounted file system after it is unexported. A new netlink-based mechanism can now release NLM locks and NFSv4 state by client address, by filesystem, and by export. Now an administrator can quiesce an export cleanly before unmounting it. The remaining patches are bug fixes, clean-ups, and minor optimizations, including a batch of memory-leak and use-after-free fixes in the ACL, lockd, and TLS handshake paths, many of them reported by Chris Mason. Sincere thanks to all contributors, reviewers, testers, and bug reporters who participated in the v7.2 NFSD development cycle. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEKLLlsBKG3yQ88j7+M2qzM29mf5cFAmox5BcACgkQM2qzM29m f5eFJQ//QlyZCt0BlzeBrGHJB41yrMZkZGSJsPaZPfvNnjIQPwd6WH3d6i1vygvC HgC+KTF/8LLuFx14m17M6FBCujixNoknMLyp74vRPZOSCoXilP/jzlDoVWwgwv73 E0AkKXyij1QFToIh7NP/ClX+Zpc9yoCR3/RWri7ud400z1mlvFBk8NA7E6pb+AzT 89lKFgkubSQVnHFRdIAgb3G/AkZzt35O6hzPA6thtwkb8MS2knE27L9HNc2InQ/K 71QjQj09052tcXOJRHlg7Xj6AeCyPteCqxsA03qMo2mmqRiSBVV+5y6czawxdHk8 yt9cDloUu+ZynhH4qktv3i8lX7dPcYNfIcMora71LAswDE5Ud3c/EG6zleA5DnzX cgUaS8VkbfLyHAlvPRl9DroizsBgrr/qjuwUqewoY/wJCpyEBtCGRxLKI0MS2Ivo BvgdXE74uCyOGZ2EYOqaocGejMtXt1GGpf2Wj5/jyDDUABEhwTptoTIlbBcWQbf6 7ZRlxjwx7kaMMtmag0ZEhkh42ujoHF3NzNDDD4hY1M6twgF+0uofJPLb5eK4JZak FDKV38iiwqq2/bWOKGnaFQBV1Hn/0569rxFku2Z0O+wWNBXhiZ5wezw84GoYaCt/ AYSDFYnI4FOrHurdmgZUyr04W2toXWN6mV3IqbDIIx5eXyWEKvU= =xAeq -----END PGP SIGNATURE----- Merge tag 'nfsd-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd updates from Chuck Lever: "Jeff Layton wired up netlink upcalls for the auth.unix.ip and auth.unix.gid caches in SunRPC and the svc_export and nfsd.fh caches in NFSD. The new kernel-user API is more extensible and lays the groundwork for retiring the old pipe interface. The default NFS r/w block size rises to 4MB on hosts with at least 16GB of RAM, reducing per-RPC overhead on fast networks. Smaller machines keep their previously computed default, and the value remains tunable through /proc/fs/nfsd/max_block_size. Chuck Lever converted the server's RPCSEC GSS Kerberos code to the kernel's shared crypto/krb5 library. The conversion retires and removes SunRPC's bespoke implementation of Kerberos v5, but keeps RPCSEC GSS-API. Continuing the xdrgen migration that converted the NLMv4 server XDR layer in v7.1, Chuck Lever converted the NLM version 3 server-side XDR layer from hand-written C to xdrgen-generated code. As with the NLMv4 conversion in v7.1, the goals are improved memory safety, lower maintenance burden, and groundwork for generation of Rust code for this layer instead of C. Chuck Lever fixed an issue where lingering NFSv4 state pins a mounted file system after it is unexported. A new netlink-based mechanism can now release NLM locks and NFSv4 state by client address, by filesystem, and by export. Now an administrator can quiesce an export cleanly before unmounting it. The remaining patches are bug fixes, clean-ups, and minor optimizations, including a batch of memory-leak and use-after-free fixes in the ACL, lockd, and TLS handshake paths, many of them reported by Chris Mason. Sincere thanks to all contributors, reviewers, testers, and bug reporters who participated in the v7.2 NFSD development cycle" * tag 'nfsd-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (106 commits) svcrdma: wake sq waiters when the transport closes nfsd: reset write verifier on deferred writeback errors nfsd: avoid leaking pre-allocated openowner on unconfirmed retry race sunrpc: wait for in-flight TLS handshake callback when cancel loses race sunrpc: pin svc_xprt across the asynchronous TLS handshake callback nfsd: fix posix_acl leak on SETACL decode failure nfsd: fix posix_acl leak and ignored error in nfsd4_create_file nfsd: check get_user() return when reading princhashlen nfsd: fix inverted cp_ttl check in async copy reaper nfsd: fix dead ACL conflict guard in nfsd4_create NFSD: Fix SECINFO_NO_NAME decode error cleanup sunrpc: harden rq_procinfo lifecycle to prevent double-free SUNRPC: Return an error from xdr_buf_to_bvec() on overflow SUNRPC: Bound-check xdr_buf_to_bvec() stores before writing nfsd: release layout stid on setlease failure lockd: Avoid hashing uninitialized bytes in nlm4svc_lookup_file() lockd: Plug nlm_file refcount leak on cached nlm_do_fopen() failure lockd: Plug nlm_file leak when nlm_do_fopen() fails Revert "NFSD: Defer sub-object cleanup in export put callbacks" Revert "svcrdma: Use contiguous pages for RDMA Read sink buffers" ... |
||
|
Linus Torvalds
|
9e7e663345 |
RDMA v7.2 merge window
Many AI driven bug fixes, and several big driver API cleanups
- Driver bug fixes and minor cleanups in mlx5, hns, rxe, efa, siw, rtrs,
mana, irdma, mlx4. Commonly error path flows, integer arithmetic
overflows on unsafe data, out of bounds access, and use after free
issues under races.
- Second half of the new udata API for drivers focusing on uAPI response
- bnxt_re supports more options for QP creation that will allow a dv
path in rdma-core
- Untangle the module dependencies so drivers don't link to ib_uverbs.ko
as was originall intended
- Provide a new way to handle umems with a consistent simplified uAPI and
update several drivers to use it. This brings dmabuf support to more
places and more drivers
- Support for mlx5 rate limit and packet pacing for UD and UC
- A batch of fixes for the new shared FRMR pools infrastructure
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCajLevAAKCRCFwuHvBreF
YVFuAP0X6gxaON+6cRGoaHp+KjxNj3zbuRj9VccTOy1OjerUdwD+LsbK/Pa9xrcO
ByA3LVvbw4BoQw9qcQpTu2klFuYV5g8=
=qnpN
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Many AI driven bug fixes, and several big driver API cleanups
- Driver bug fixes and minor cleanups in mlx5, hns, rxe, efa, siw,
rtrs, mana, irdma, mlx4. Commonly error path flows, integer
arithmetic overflows on unsafe data, out of bounds access, and use
after free issues under races.
- Second half of the new udata API for drivers focusing on uAPI
response
- bnxt_re supports more options for QP creation that will allow a dv
path in rdma-core
- Untangle the module dependencies so drivers don't link to
ib_uverbs.ko as was originall intended
- Provide a new way to handle umems with a consistent simplified uAPI
and update several drivers to use it. This brings dmabuf support to
more places and more drivers
- Support for mlx5 rate limit and packet pacing for UD and UC
- A batch of fixes for the new shared FRMR pools infrastructure"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (148 commits)
RDMA/irdma: Replace waitqueue and flag with completion
RDMA/hns: Fix memory leak of bonding resources
RDMA/rtrs-srv: Bound RDMA-Write length to chunk size in rdma_write_sg
docs: infiniband: correct name of option to enable the ib_uverbs module
RDMA/bnxt_re: Reject GET_TOGGLE_MEM when toggle page was not allocated
RDMA/bnxt_re: Fail DBR related page allocation UAPIs if the feature is disabled
RDMA/bnxt_re: Avoid repeated requests to allocate WC pages
RDMA/bnxt_re: Proper rollback if the ioremap fails
RDMA/bnxt_re: Add a max slot check for SQ
RDMA/bnxt_re: Avoid displaying the kernel pointer
RDMA/bnxt_re: Free CQ toggle page after firmware teardown
RDMA/bnxt_re: Free SRQ toggle page after firmware teardown
RDMA/bnxt_re: Initialize dpi variable to zero
ABI: sysfs-class-infiniband: minor cleanup
RDMA/mlx5: Release the HW‑provided UAR index rather than the SW one
RDMA/mlx5: Fix undefined shift of user RQ WQE size
RDMA/mlx5: Remove raw RSS QP restrack tracking
RDMA/mlx5: Remove DCT restrack tracking
RDMA/mlx5: Drop FRMR pool handle on UMR revoke failure
RDMA/core: Add ib_frmr_pool_drop for unrecoverable handles
...
|
||
|
Chenyu Chen
|
e239d3e3cb |
drm/edid: parse panel type from DisplayID 2.x Display Parameters
Parse the Display Parameters Data Block (tag 0x21) defined in DisplayID v2.1a Section 4.2.6. Extract the Display Device Technology field from the color depth and device technology byte, which indicates whether the panel uses LCD or OLED technology. Add a panel_type field to struct drm_display_info and populate it during DisplayID iteration so downstream drivers can use it for panel-type-dependent behavior. Add DRM_MODE_PANEL_TYPE_LCD to the UAPI panel type property alongside the existing OLED value. Assisted-by: Copilot:Claude-Opus-4.6 Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
||
|
Yifan Zhang
|
445075e199 |
drm/amdgpu: add ioctl to handle RAS poison error
Add a new DRM_IOCTL_AMDGPU_PROC_OPTIONS ioctl with the AMDGPU_PROC_OPTIONS_OP_KFD_SIGBUS_DELAY option, allowing userspace (ROCr) to control per-process SIGBUS delivery. Userspace for this can be found at: https://github.com/ROCm/rocm-systems/pull/6190 Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
||
|
Linus Torvalds
|
e771677c93 |
iommufd v7.2 merge window pull request
All various fixes:
- Typo breaking the veventq uAPI for 32 bit userspace
- Several Sashiko found errors in the veventq and fault fd paths
- Fix incorrect use of dmabuf locks, and possible races with iommufd
destroy and dmabuf revoke
- Sashiko errors found in the uAPI validation for IOMMU_HWPT_INVALIDATE
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCajFgVAAKCRCFwuHvBreF
YRxvAQCAPARrvfgiO9TcXFgXIHLx4thK5+QAzQuhn8WRHhJyaQD9FV0Ps3Iueayi
hBEUbavor5dwMRRwcAZy92lsno5xvwc=
=pC91
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"All various fixes:
- Typo breaking the veventq uAPI for 32 bit userspace
- Several Sashiko found errors in the veventq and fault fd paths
- Fix incorrect use of dmabuf locks, and possible races with iommufd
destroy and dmabuf revoke
- Sashiko errors found in the uAPI validation for IOMMU_HWPT_INVALIDATE"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommu: Avoid copying the user array twice in the full-array copy helper
iommufd/selftest: Add invalidation entry_num and entry_len boundary tests
iommufd: Set upper bounds on cache invalidation entry_num and entry_len
iommufd: Clarify IOAS_MAP_FILE dma-buf support
iommufd: Destroy the pages content after detaching from dmabuf
iommufd: Take dma_resv lock before dma_buf_unpin() in release path
iommufd/selftest: Cover invalid read counts on vEVENTQ FD
iommufd: Avoid partial fault group delivery in iommufd_fault_fops_read()
iommufd: Break the loop on failure in iommufd_fault_fops_read()
iommufd: Reject invalid read count in iommufd_fault_fops_read()
iommufd: Propagate allocation failure in iommufd_veventq_deliver_fetch()
iommufd: Reject invalid read count in iommufd_veventq_fops_read()
iommufd: Rewind header length in done if iommufd_veventq_fops_read() fails
iommufd/selftest: Add boundary tests for veventq_depth
iommufd: Set veventq_depth upper bound
iommufd: Move vevent memory allocation outside spinlock
iommufd: Fix data_len byte-count vs element-count mismatch
iommufd: Use sizeof(*hdr) instead of sizeof(hdr) in veventq read
|
||
|
Linus Torvalds
|
d076a8d3b9 |
IOMMU Updates for Linux v7.2
Including:
Core Code:
- Fix dma-iommu scatterlist length handling in the P2PDMA path.
- Extend the generic IOMMU page-table code with detailed gather
support for more precise invalidations.
- Add pending-gather tracking to generic page-table invalidation
handling.
- Add support for smaller virtual address sizes in the generic AMDv1
page-table format, including KUnit coverage.
- Fix page-size bitmap calculation for smaller VA configurations.
- Rework Arm io-pgtable allocation/freeing to consistently use the
iommu-pages API and address-conversion helpers.
- Add PCI ATS infrastructure for devices that require ATS, including
always-on ATS handling for pre-CXL devices.
AMD IOMMU:
- Fix several IOTLB invalidation details, including PDE handling,
flush-all behavior, and command address encoding.
- Honor IVINFO[VASIZE] when deriving address limits.
- Fix premature loop termination in init_iommu_one().
- Add Hygon family 18h model 4h IOAPIC support.
- Clean up legacy-mode handling, stale comments, dead IVMD
exclusion-range code, and unused address-size macros.
Arm SMMU / Arm SMMU v3:
- SMMUv2:
- Device-tree binding updates for Qualcomm Hawi, Nord and Shikra
SoCs.
- Constain the clocks which can be specified for recent Qualcomm
SoCs.
- Fix broken compatible string for Qualcomm prefetcher
configuration an add new entry for the Glymur MDSS.
- Ensure SMMU is powered-up when writing context bank for Adreno
client.
- SMMUv3:
- Fix off-by-one in queue allocation retry loop.
- Enable hardware update of access/dirty bits from the SMMU.
- Re-jig command construction to use separate inline helpers for
each command type.
Intel VT-d:
- Add the PCI segment number to DMA fault messages.
- Improve support for non-PRI mode SVA.
- Ensure atomicity during context entry teardown.
- Fix RB-tree corruption in the probe error path.
RISC-V IOMMU:
- Add NAPOT range invalidation support.
- Use detailed gather information for invalidation decisions.
- Compute the best stride for single invalidations.
- Advertise Svpbmt support to the generic page-table code.
- Add capability definitions and clean up command macro encoding.
VeriSilicon IOMMU:
- Add a new VeriSilicon IOMMU driver.
- Add devicetree binding documentation and MAINTAINERS coverage.
- Add the RK3588 VeriSilicon IOMMU node.
- Apply small cleanups and warning fixes in the new driver.
Rockchip IOMMU:
- Disable the fetch DTE time limit.
Apple DART:
- Correct a stale CONFIG_PCIE_APPLE macro name in a comment.
-----BEGIN PGP SIGNATURE-----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=hD8h
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core Code:
- Fix dma-iommu scatterlist length handling in the P2PDMA path
- Extend the generic IOMMU page-table code with detailed gather
support for more precise invalidations
- Add pending-gather tracking to generic page-table invalidation
handling
- Add support for smaller virtual address sizes in the generic AMDv1
page-table format, including KUnit coverage
- Fix page-size bitmap calculation for smaller VA configurations
- Rework Arm io-pgtable allocation/freeing to consistently use the
iommu-pages API and address-conversion helpers
- Add PCI ATS infrastructure for devices that require ATS, including
always-on ATS handling for pre-CXL devices
AMD IOMMU:
- Fix several IOTLB invalidation details, including PDE handling,
flush-all behavior, and command address encoding
- Honor IVINFO[VASIZE] when deriving address limits
- Fix premature loop termination in init_iommu_one()
- Add Hygon family 18h model 4h IOAPIC support
- Clean up legacy-mode handling, stale comments, dead IVMD
exclusion-range code, and unused address-size macros
Arm SMMU / Arm SMMU v3:
- SMMUv2:
- Device-tree binding updates for Qualcomm Hawi, Nord and Shikra
SoCs
- Constrain the clocks which can be specified for recent Qualcomm
SoCs
- Fix broken compatible string for Qualcomm prefetcher
configuration an add new entry for the Glymur MDSS
- Ensure SMMU is powered-up when writing context bank for Adreno
client
- SMMUv3:
- Fix off-by-one in queue allocation retry loop
- Enable hardware update of access/dirty bits from the SMMU
- Re-jig command construction to use separate inline helpers for
each command type
Intel VT-d:
- Add the PCI segment number to DMA fault messages
- Improve support for non-PRI mode SVA
- Ensure atomicity during context entry teardown
- Fix RB-tree corruption in the probe error path
RISC-V IOMMU:
- Add NAPOT range invalidation support
- Use detailed gather information for invalidation decisions
- Compute the best stride for single invalidations
- Advertise Svpbmt support to the generic page-table code
- Add capability definitions and clean up command macro encoding
VeriSilicon IOMMU:
- Add a new VeriSilicon IOMMU driver
- Add devicetree binding documentation and MAINTAINERS coverage
- Add the RK3588 VeriSilicon IOMMU node
- Apply small cleanups and warning fixes in the new driver
Rockchip IOMMU:
- Disable the fetch DTE time limit
Apple DART:
- Correct a stale CONFIG_PCIE_APPLE macro name in a comment"
* tag 'iommu-updates-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (66 commits)
iommu/dma-iommu: Fix wrong scatterlist length assignment in P2PDMA path
iommu/amd: Control INVALIDATE_IOMMU_PAGES PDE from the gather
iommu/amd: Make CMD_INV_IOMMU_ALL_PAGES_ADDRESS match the spec
iommu/amd: Have amd_iommu_domain_flush_pages() use last
iommu/amd: Pass last in through to build_inv_address()
iommu/amd: Simplify build_inv_address()
iommu/apple-dart: correct CONFIG_PCIE_APPLE macro name in comment
iommu/vt-d: Fix RB-tree corruption in probe error path
iommu/vt-d: Improve IOMMU fault information
iommu/vt-d: Remove typo from pasid_pte_config_nested()
iommu/vt-d: Clear Present bit before tearing down scalable-mode context entry
iommu/vt-d: Avoid WARNING in sva unbind path
dt-bindings: arm-smmu: Correct and add constraints for Hawi, Shikra and Kaanapali
dt-bindings: arm-smmu: Add compatible for Qualcomm Nord SoC
iommu/amd: Don't split flush for amd_iommu_domain_flush_all()
iommu/rockchip: disable fetch dte time limit
iommu/arm-smmu-v3: Allow ATS to be always on
PCI: Allow ATS to be always on for pre-CXL devices
PCI: Add pci_ats_required() for CXL.cache capable devices
iommu/vsi: Use list_for_each_entry()
...
|
||
|
Linus Torvalds
|
d44ade05aa |
virtio,vhost,vdpa: features, fixes
- new virtio CAN driver
- support for LoongArch architecture in fw_cfg
- support for firmware notifications in vdpa/octeon_ep
- support for VFs in virtio core
- fixes, cleanups all over the place, notably
- vhost: fix vhost_get_avail_idx for a non empty ring
fixing an significant old perf regression
- plus READ_ONCE annotations mean virtio ring is now
free of KCSAN warnings
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmoye9IPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpwHYIAMqFAn8OKVub093fOPYsa3dnsCI+6Y70Q7BK
XWXmEUs41Zbrye7GCVVKBdGog/v8WYcjA5yzyZDeCpAwbn8Vwiw6VbgD+t5IJFG+
iLtUlbotvod+esyKbSZdTSSIO5Lxxw0QqDdOt3qhz5aWwMX4LYZSO0BvNzFGaNT5
TiyKRpPtsbfox09YYrDYfm1vFhlR0mE3fMFsAy8dvauliy3rAh9bWg54oGeFdACD
PGWGvsVycl7Ly++yflqFNp8nPE+azL4jbFm3/SrjMhFcTpIEV692nhrSmiIKK7Cv
K5au5nvAmtt1sRyDHucFB9+pbUOYkNLkc3DrH/NqGFwUwxF3+pk=
=H7B4
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- new virtio CAN driver
- support for LoongArch architecture in fw_cfg
- support for firmware notifications in vdpa/octeon_ep
- support for VFs in virtio core
- fixes, cleanups all over the place, notably:
- vhost: fix vhost_get_avail_idx for a non empty ring
fixing an significant old perf regression
- READ_ONCE() annotations mean virtio ring is now
free of KCSAN warnings
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (37 commits)
can: virtio: Fix comment in UAPI header
can: virtio: Add virtio CAN driver
virtio: add num_vf callback to virtio_bus
fw_cfg: Add support for LoongArch architecture
vdpa/octeon_ep: fix IRQ-to-ring mapping in interrupt handler
vdpa/octeon_ep: Add vDPA device event handling for firmware notifications
vdpa/octeon_ep: Use 4 bytes for mailbox signature
vdpa/octeon_ep: Fix PF->VF mailbox data address calculation
vhost_task_create: kill unnecessary .exit_signal initialization
vhost: remove unnecessary module_init/exit functions
vdpa/mlx5: Use kvzalloc_flex() for MTT command memory
vdpa_sim_net: switch to dynamic root device
vdpa_sim_blk: switch to dynamic root device
virtio-mem: Destroy mutex before freeing virtio_mem
virtio-balloon: Destroy mutex before freeing virtio_balloon
tools/virtio: fix build for kmalloc_obj API and missing stubs
virtio_ring: Add READ_ONCE annotations for device-writable fields
vduse: fix compat handling for VDUSE_IOTLB_GET_FD/VDUSE_VQ_GET_INFO
tools/virtio: check mmap return value in vringh_test
vhost/net: complete zerocopy ubufs only once
...
|
||
|
Linus Torvalds
|
3dc0df0339 |
VFIO updates for v7.2-rc1
- Fix out-of-tree vfio selftest builds with make O=. (Jason Gunthorpe)
- Allow vfio selftests to build when ARCH=x86 is used for 64-bit x86
builds. (David Matlack)
- Tighten vfio selftest infrastructure with stricter builds, safer
path handling, sysfs helpers, and reusable device/VF-token setup.
Build on that to add the SR-IOV UAPI selftest across supported
IOMMU modes. (Raghavendra Rao Ananta)
- Conclude earlier vfio PCI BAR work already taken as v7.1 fixes by
replacing vfio_pci_core_setup_barmap() and direct barmap[] access
with vfio_pci_core_get_iomap(). Fix resulting sparse warnings.
(Matt Evans)
- Simplify hisi_acc vfio-pci variant driver device-info reads by
using the mailbox's new direct command-based read helper.
(Weili Qian)
- Avoid duplicate reset handling in the Xe vfio-pci variant driver
reset-done path. (GuoHan Zhao)
- Resolve a lockdep circular dependency splat by tracking active
VFs with a private sriov_active flag rather than calling
pci_num_vf() under memory_lock. (Raghavendra Rao Ananta)
- Add CXL DVSEC-based readiness polling for Blackwell-Next in the
nvgrace-gpu vfio-pci variant driver, including interruptible,
lockless waits to support worst case spec defined timeouts.
(Ankit Agrawal)
- Prevent vfio_mig_get_next_state() from spinning forever on blocked
migration state transition. (Junrui Luo)
- Fix a qat vfio variant driver migration resume race by taking the
migration file lock before boundary checks. (Giovanni Cabiddu)
- Add explicit dependencies between vfio selftest output object files
and output directories to ensure directories are always created.
(David Matlack)
-----BEGIN PGP SIGNATURE-----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=n16c
-----END PGP SIGNATURE-----
Merge tag 'vfio-v7.2-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Fix out-of-tree vfio selftest builds with make O= (Jason Gunthorpe)
- Allow vfio selftests to build when ARCH=x86 is used for 64-bit x86
builds (David Matlack)
- Tighten vfio selftest infrastructure with stricter builds, safer path
handling, sysfs helpers, and reusable device/VF-token setup. Build on
that to add the SR-IOV UAPI selftest across supported IOMMU modes
(Raghavendra Rao Ananta)
- Conclude earlier vfio PCI BAR work already taken as v7.1 fixes by
replacing vfio_pci_core_setup_barmap() and direct barmap[] access
with vfio_pci_core_get_iomap(). Fix resulting sparse warnings (Matt
Evans)
- Simplify hisi_acc vfio-pci variant driver device-info reads by using
the mailbox's new direct command-based read helper (Weili Qian)
- Avoid duplicate reset handling in the Xe vfio-pci variant driver
reset-done path (GuoHan Zhao)
- Resolve a lockdep circular dependency splat by tracking active VFs
with a private sriov_active flag rather than calling pci_num_vf()
under memory_lock (Raghavendra Rao Ananta)
- Add CXL DVSEC-based readiness polling for Blackwell-Next in the
nvgrace-gpu vfio-pci variant driver, including interruptible,
lockless waits to support worst case spec defined timeouts (Ankit
Agrawal)
- Prevent vfio_mig_get_next_state() from spinning forever on blocked
migration state transition (Junrui Luo)
- Fix a qat vfio variant driver migration resume race by taking the
migration file lock before boundary checks (Giovanni Cabiddu)
- Add explicit dependencies between vfio selftest output object files
and output directories to ensure directories are always created
(David Matlack)
* tag 'vfio-v7.2-rc1' of https://github.com/awilliam/linux-vfio:
vfio: selftests: Ensure libvfio output dirs are always created
vfio/qat: fix f_pos race in qat_vf_resume_write()
vfio: prevent infinite loop in vfio_mig_get_next_state() on blocked arc
vfio/nvgrace-gpu: Add Blackwell-Next GPU readiness check via CXL DVSEC
vfio/pci: Use a private flag to prevent power state change with VFs
vfio/pci: Fix sparse warning in vfio_pci_core_get_iomap()
vfio/xe: avoid duplicate reset in xe_vfio_pci_reset_done
hisi_acc_vfio_pci: simplify the command for reading device information
vfio/pci: Replace vfio_pci_core_setup_barmap() with vfio_pci_core_get_iomap()
vfio: selftests: Add tests to validate SR-IOV UAPI
vfio: selftests: Add helpers to alloc/free vfio_pci_device
vfio: selftests: Add helper to set/override a vf_token
vfio: selftests: Expose more vfio_pci_device functions
vfio: selftests: Extend container/iommufd setup for passing vf_token
vfio: selftests: Introduce a sysfs lib
vfio: selftests: Introduce snprintf_assert()
vfio: selftests: Add -Wall and -Werror to the Makefile
vfio: selftests: Allow builds when ARCH=x86
vfio: selftests: Fix out-of-tree build with make O=
|
||
|
Linus Torvalds
|
70cb95c736 |
soc: drivers for 7.2
There are a few added drivers, but mostly the normal maintenance to drivers
for firmware, memory controller and other soc specific hadware:
- The NXP QuickEngine gets modern MSI support, which allows some cleanups to
the GICv3 irqchip chip driver
- A new SoC specific driver for the Renesas R-Car MFIS unit is added,
encapsulating support for the on-chip mailbox and hwspinlock
implementations that are not easily separated into individual
drivers
- The Qualcomm SoC drivers add support for additional SoC implementations,
and flexiblity around power managedment for the serial-engine driver
as well as probing the LLCC driver using custom hardware descriptions
inside of the device itself.
- Added support for the Samsung thermal management unit
- A cleanup to the Tegra 'PMC' driver interfaces to remove legacy
APIs and allow multiple PMC instances everywhere.
- Updates to the TI SCI and KNAS drivers to improve suspend/resume
support.
- Minor driver changes for mediatek, xilinx, allwinner, aspeed, tegra,
broadcom, amd, microchip and starfive specific drivers
- Memory controller updates for Tegra and Renesas for additional SoC
types and other improvements.
- Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces,
to update driver probing, object lifetimes and address minor bugs.
-----BEGIN PGP SIGNATURE-----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=27+M
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"There are a few added drivers, but mostly the normal maintenance to
drivers for firmware, memory controller and other soc specific
hardware:
- The NXP QuickEngine gets modern MSI support, which allows some
cleanups to the GICv3 irqchip chip driver
- A new SoC specific driver for the Renesas R-Car MFIS unit is added,
encapsulating support for the on-chip mailbox and hwspinlock
implementations that are not easily separated into individual
drivers
- The Qualcomm SoC drivers add support for additional SoC
implementations, and flexibility around power management for the
serial-engine driver as well as probing the LLCC driver using
custom hardware descriptions inside of the device itself.
- Added support for the Samsung thermal management unit
- A cleanup to the Tegra 'PMC' driver interfaces to remove legacy
APIs and allow multiple PMC instances everywhere.
- Updates to the TI SCI and KNAS drivers to improve suspend/resume
support.
- Minor driver changes for mediatek, xilinx, allwinner, aspeed,
tegra, broadcom, amd, microchip and starfive specific drivers
- Memory controller updates for Tegra and Renesas for additional SoC
types and other improvements.
- Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces, to
update driver probing, object lifetimes and address minor bugs"
* tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
Revert "firmware: zynqmp: Add dynamic CSU register discovery and sysfs interface"
Revert "Documentation: ABI: add sysfs interface for ZynqMP CSU registers"
memory: tegra234: drop dead NULL check in tegra234_mc_icc_aggregate()
memory: tegra264: drop redundant tegra264_mc_icc_aggregate()
memory: tegra186-emc: stop borrowing MC aggregate hook for EMC
soc: aspeed: cleanup dead default for ASPEED_SOCINFO
firmware: tegra: bpmp: Add support for multi-socket platforms
firmware: tegra: bpmp: Propagate debugfs errors
soc/tegra: pmc: Add Tegra238 support
soc/tegra: pmc: Restrict power-off handler to Nexus 7
soc/tegra: pmc: Populate powergate debugfs only when needed
soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard
soc/tegra: pmc: Remove unused legacy functions
soc/tegra: pmc: Create PMC context dynamically
firmware: samsung: acpm: remove compile-testing stubs
firmware: samsung: acpm: Add devm_acpm_get_by_phandle helper
firmware: samsung: acpm: Add TMU protocol support
firmware: samsung: acpm: Make acpm_ops const and access via pointer
firmware: samsung: acpm: Drop redundant _ops suffix in acpm_ops members
firmware: samsung: acpm: Annotate rx_data->cmd with __counted_by_ptr
...
|
||
|
Linus Torvalds
|
4b99990cdf |
drm-next for 7.2-rc1
core: - add docbook for DRM_IOCTL_SYNCOBJ_EVENTFD - change signature of drm_connector_attach_hdr_output_metadata_property - dedup counter and timestamp retrieval in vblank code - parse AMD VSDB v3 in CTA extension blocks - add P230, Y7, XYYY2101010, T430, XVUY210101010 formats - don't call drop master on file close if not master - use drm_printf_indent in atomic / bridge - fix 32b format descriptions - docs: fix toctree - hdmi: add common TMDS character rates - fix drm_syncobj_find_fence leak rust: - introduce Higher-Ranked lifetime types - replace drvdata with scoped registration data - add GPUVM immediate mode abstraction for rust GPU drivers - introduce DeviceContext type state for drm::Device bridge: - clarify drm_bridge_get/put - create drm_get_bridge_by_endpoint and use it - analogix_dp: add panel probing - ite-it6211 - use drm audio hdmi helpers buddy: - add lockdep annotations dp: - add PR and VRR updates - mst: fix buffer overflows - add Adaptive Sync SDP decoding support - fix OOB reads in dp-mst ttm: - bump fpfn/lpfn to 64-bit scheduler: - change default to fair scheduler - map runqueue 1:1 with scheduler dma-buf: - port selftests to kunit - convert dma-buf system/heap allocators to module - add separate DMABUF_HEAPS_SYSTEM_CC_SHARED Kconfig udmabuf: - revert hugetlb support - fix error with CONFIG_DMA_API_DEBUG dma-fence: - fix tracepoints lifetime - remove unused signal on any support ras: - add clear error counter netlink command to drm ras gpusvm: - reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges - use IOVA allocations pagemap: - use IOVA allocations panels: - update to use ref counts - add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1 - add support for waveshare panels - CMN N116BCN-EA1, CMN N140HCA-EEK, IVO M140NWFQ R5, - IVO, R140NWFW R0, BOE NT140*, BOE NV133FHM-N4F, - AUO B140*, AUO B133HAN06.6 and AUO B116XTN02.3 eDP panels - Surface Pro 12 Panel xe: - add CRI PCI-IDs - debugfs add multi-lrc info - engine init cleanup - PF fair scheduling auto provisioning - system controller support for CRI/Xe3p - PXP state machine fixes - Reset/wedge/unload corner case fixes - Wedge path memory allocation fixes - PAT type cleanups - Reject unsafe PAT for CPU cached memory - OA improvements for CRI device memory - kernel doc syntax in xe headers - xe_drm.h documentation fixes - include guard cleanups - VF CCS memory pool - i915/xe step unification - Xe3p GT tuning fixes - forcewake cleanup in GT and GuC - admin-only PF mode - enable hwmon energy attributes for CRI - enable GT_MI_USER_INTERRUPT - refactor emit functions - oa workarounds - multi_queue: allow QUEUE_TIMESTAMP register - convert stolen memory to ttm range manager - use xe2 style blitter as a feature flag - make drm_driver const - add/use IRQ page to HW engine definition - fix oops when display disabled i915: - enable PIPEDMC_ERROR interrupt - more common display code refactoring - restructure DP/HDMI sink format handling - eliminate FB usage from lowlevel pinning code - panel replay bw optimization - integrate sharpness filter into the scaler - new fb_pin abstraction for xe/i915 fb transparent handling - skip inactive MST connectors on HDCP - start switching to display specific registers - use polling when irq unavailable - Adaptive-sync SDP prep amdgpu: - use drm_display_info for AMD VSDB data - Initial HDMI 2.1 FRL support - Initial DCN 4.2.1 support - GART fixes for non-4k pages - GC 11.5.6/SDMA 6.4.0/and other new IPs - GFX9/DCE6/Hawaii/SDMA4/GART/Userq fixes - Finish support for using multiple SDMA queues for TTM operations - SWSMU updates - GC 12.1 updates - SMU 15.0.8 updates - DCN 4.2 updates - DC type conversion fixes - Enable DC power module - Replay/PSR updates - SMU 13.x updates - Compute queue quantum MQD updates - ASPM fix - Align VKMS with common implementation - DC analog support fixes - UVD 3 fixes - TCC harvesting fixes for SI - GC 11 APU module reload fix - NBIO 6.3.2 support - IH 7.1 updates - DC cursor fixes - VCN/JPEG user fence fixes - DC support for connectors without DDC - Prefer ROM BAR for default VGA device - DC bandwidth fixes - Add PTL support for profiler - Introduce dc_plane_cm and migrate surface update color path - Add FRL registers for HDMI 2.1 - Restructure VM state machine - Auxless ALPM support - GEM_OP locking/warning fixes - switch to system_dfl_wq amdkfd: - GPUVM TLB flush fix - Hotplug fix - Boundary check fixes - SVM fixes - CRIU fixes - add profiler API - MES 12.1 updates msm: - core: - fix shrinker documentation - IFPC enabled for gen8 - PERFCNTR_CONFIG ioctl support - GPU: - reworked UBWC handling - a810 support - MDSS: - add support for Milos platform - reworked UBWC handling - DisplayPort: - reworked HPD handling as prep for MST - DPU: - Milos platform support - reworked UBWC handling - DSI: - Milos platform support nova: - Hopper/Blackwell enablement (GH100/GB100/GB202) - FSP support - 32-bit firmware support - HAL functions - refactor GSP boot/unload - GA100 support - VBIOS hardening/refactoring - Adopt higher order lifetime types tyr: - define register blocks - add shmem backed GEM objects - adopt higher order lifetime types - move clock cleanup into Drop radeon: - Hawaii SMU fixes - CS parser fix - use struct drm_edid instead of edid amdxdna: - export per-client BO memory via fdinfo - AIE4 device support - support medium/lower power modes - expandable device heap support - revert read-only user-pointer BO mappings ivpu: - support frequency limiting panthor: - enable GEM shrinker support - add eviction and reclaim info to fdinfo v3d: - enable runtime PM mgag200: - support XRGB1555 + C8 ast: - support XRGB1555 + C8 - use constants for lots of registers - fix register handling imagination: - fence handling refactoring nouveau: - fix sched double call - expose VBIOS on GSP-RM systems - add GA100 support virtio: - add VIRTIO_GPU_F_BLOB_ALIGNMENT flag - add deferred mapping support gud: - add RCade Display Adapter hibmc: - fix no connectors usage mediatek: - hdmi: convert error handling - simplify mtk_crtc allocation exynos: - move fbdev emulation to drm client buffers - use drm format helpers for geometry/size - adopt core DMA tracking - fix framebuffer offset handling renesas: - add RZ/T2H SOC support versilicon: - add cursor plane support tegra: - use drm client for framebuffer -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmoyOXkACgkQDHTzWXnE hr5Pxg//VwqDYgf8CwWtLwXqHYBhGDwj1PDA/zLoosm32fXABKhzPMA5XcaPHBKh Y7Wyo7988cxXFQ0BRltKP1S3d04ck5ZbBA/qpwwX9Pz0u8HhNMicwLd9ASlWqqkP ogFIj3J8PsjlTMVI2cnzQ7s0TMQoQorUaNl13vQnITDPSNncCAunrKixpzVagHeK /ARlIg4kqSbvlKAhkvps7FbJUG3l/g901HdAcspp0bn6d3+4zz8Yg+yg/b4Xngdh Sn6UGDxwrNeBSHP2Spj5/rGSOuo4L8Fr1rS0+KEwRnEqrg+qdq9mo9l0xQsJV9/e 4ql6nssEMC/CIHwHomsgCdxdOsj2DiXLUucJKBwavHHSWNHFgdLhNSdaUcwrkui3 sLmahOEXFwFIR3K1X++547Wux9DhAWDcvq/SnxzN0dQBpN0AmpE0/o/3Vb7Vw4dO /cfvI4Y1WGviJCs58p36tqYGx8dDPuMh9tiUtQvBXBkkS87MqBX8wM49qHSlzEOV EkQfGV1cLMBJpZZkMezrqCNyIS7ghzXJ+K/IruAPrgvN7/kCY7hRclUT+Z/1Mqvc mw3Japbcy7P+BMKnlNfCZsDXg04kYZC5MOaMeiJOLg6qfHBHITD8gP1zct+RikIS d+43kYwt43dPj53jUUXpREoAezSoF2ktncFChB2tdeaMlb6oJIM= =86oS -----END PGP SIGNATURE----- Merge tag 'drm-next-2026-06-17' of https://gitlab.freedesktop.org/drm/kernel Pull drm updates from Dave Airlie: "Highlights: - xe: add initial CRI platform support - amdgpu: initial HDMI 2.1 FRL support - rust: add some new type concepts for device lifetimes - scheduler: moves to a fair algorithm and lots of cleanups But it's mostly the usual mountain of changes across the board. core: - add docbook for DRM_IOCTL_SYNCOBJ_EVENTFD - change signature of drm_connector_attach_hdr_output_metadata_property - dedup counter and timestamp retrieval in vblank code - parse AMD VSDB v3 in CTA extension blocks - add P230, Y7, XYYY2101010, T430, XVUY210101010 formats - don't call drop master on file close if not master - use drm_printf_indent in atomic / bridge - fix 32b format descriptions - docs: fix toctree - hdmi: add common TMDS character rates - fix drm_syncobj_find_fence leak rust: - introduce Higher-Ranked lifetime types - replace drvdata with scoped registration data - add GPUVM immediate mode abstraction for rust GPU drivers - introduce DeviceContext type state for drm::Device bridge: - clarify drm_bridge_get/put - create drm_get_bridge_by_endpoint and use it - analogix_dp: add panel probing - ite-it6211 - use drm audio hdmi helpers buddy: - add lockdep annotations dp: - add PR and VRR updates - mst: fix buffer overflows - add Adaptive Sync SDP decoding support - fix OOB reads in dp-mst ttm: - bump fpfn/lpfn to 64-bit scheduler: - change default to fair scheduler - map runqueue 1:1 with scheduler dma-buf: - port selftests to kunit - convert dma-buf system/heap allocators to module - add separate DMABUF_HEAPS_SYSTEM_CC_SHARED Kconfig udmabuf: - revert hugetlb support - fix error with CONFIG_DMA_API_DEBUG dma-fence: - fix tracepoints lifetime - remove unused signal on any support ras: - add clear error counter netlink command to drm ras gpusvm: - reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges - use IOVA allocations pagemap: - use IOVA allocations panels: - update to use ref counts - add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1 - add support for waveshare panels - CMN N116BCN-EA1, CMN N140HCA-EEK, IVO M140NWFQ R5, - IVO, R140NWFW R0, BOE NT140*, BOE NV133FHM-N4F, - AUO B140*, AUO B133HAN06.6 and AUO B116XTN02.3 eDP panels - Surface Pro 12 Panel xe: - add CRI PCI-IDs - debugfs add multi-lrc info - engine init cleanup - PF fair scheduling auto provisioning - system controller support for CRI/Xe3p - PXP state machine fixes - Reset/wedge/unload corner case fixes - Wedge path memory allocation fixes - PAT type cleanups - Reject unsafe PAT for CPU cached memory - OA improvements for CRI device memory - kernel doc syntax in xe headers - xe_drm.h documentation fixes - include guard cleanups - VF CCS memory pool - i915/xe step unification - Xe3p GT tuning fixes - forcewake cleanup in GT and GuC - admin-only PF mode - enable hwmon energy attributes for CRI - enable GT_MI_USER_INTERRUPT - refactor emit functions - oa workarounds - multi_queue: allow QUEUE_TIMESTAMP register - convert stolen memory to ttm range manager - use xe2 style blitter as a feature flag - make drm_driver const - add/use IRQ page to HW engine definition - fix oops when display disabled i915: - enable PIPEDMC_ERROR interrupt - more common display code refactoring - restructure DP/HDMI sink format handling - eliminate FB usage from lowlevel pinning code - panel replay bw optimization - integrate sharpness filter into the scaler - new fb_pin abstraction for xe/i915 fb transparent handling - skip inactive MST connectors on HDCP - start switching to display specific registers - use polling when irq unavailable - Adaptive-sync SDP prep amdgpu: - use drm_display_info for AMD VSDB data - Initial HDMI 2.1 FRL support - Initial DCN 4.2.1 support - GART fixes for non-4k pages - GC 11.5.6/SDMA 6.4.0/and other new IPs - GFX9/DCE6/Hawaii/SDMA4/GART/Userq fixes - Finish support for using multiple SDMA queues for TTM operations - SWSMU updates - GC 12.1 updates - SMU 15.0.8 updates - DCN 4.2 updates - DC type conversion fixes - Enable DC power module - Replay/PSR updates - SMU 13.x updates - Compute queue quantum MQD updates - ASPM fix - Align VKMS with common implementation - DC analog support fixes - UVD 3 fixes - TCC harvesting fixes for SI - GC 11 APU module reload fix - NBIO 6.3.2 support - IH 7.1 updates - DC cursor fixes - VCN/JPEG user fence fixes - DC support for connectors without DDC - Prefer ROM BAR for default VGA device - DC bandwidth fixes - Add PTL support for profiler - Introduce dc_plane_cm and migrate surface update color path - Add FRL registers for HDMI 2.1 - Restructure VM state machine - Auxless ALPM support - GEM_OP locking/warning fixes - switch to system_dfl_wq amdkfd: - GPUVM TLB flush fix - Hotplug fix - Boundary check fixes - SVM fixes - CRIU fixes - add profiler API - MES 12.1 updates msm: - core: - fix shrinker documentation - IFPC enabled for gen8 - PERFCNTR_CONFIG ioctl support - GPU: - reworked UBWC handling - a810 support - MDSS: - add support for Milos platform - reworked UBWC handling - DisplayPort: - reworked HPD handling as prep for MST - DPU: - Milos platform support - reworked UBWC handling - DSI: - Milos platform support nova: - Hopper/Blackwell enablement (GH100/GB100/GB202) - FSP support - 32-bit firmware support - HAL functions - refactor GSP boot/unload - GA100 support - VBIOS hardening/refactoring - Adopt higher order lifetime types tyr: - define register blocks - add shmem backed GEM objects - adopt higher order lifetime types - move clock cleanup into Drop radeon: - Hawaii SMU fixes - CS parser fix - use struct drm_edid instead of edid amdxdna: - export per-client BO memory via fdinfo - AIE4 device support - support medium/lower power modes - expandable device heap support - revert read-only user-pointer BO mappings ivpu: - support frequency limiting panthor: - enable GEM shrinker support - add eviction and reclaim info to fdinfo v3d: - enable runtime PM mgag200: - support XRGB1555 + C8 ast: - support XRGB1555 + C8 - use constants for lots of registers - fix register handling imagination: - fence handling refactoring nouveau: - fix sched double call - expose VBIOS on GSP-RM systems - add GA100 support virtio: - add VIRTIO_GPU_F_BLOB_ALIGNMENT flag - add deferred mapping support gud: - add RCade Display Adapter hibmc: - fix no connectors usage mediatek: - hdmi: convert error handling - simplify mtk_crtc allocation exynos: - move fbdev emulation to drm client buffers - use drm format helpers for geometry/size - adopt core DMA tracking - fix framebuffer offset handling renesas: - add RZ/T2H SOC support versilicon: - add cursor plane support tegra: - use drm client for framebuffer" * tag 'drm-next-2026-06-17' of https://gitlab.freedesktop.org/drm/kernel: (1731 commits) dma-buf: move system_cc_shared heap under separate Kconfig accel/amdxdna: Clear sva pointer after unbind agp/amd64: Fix broken error propagation in agp_amd64_probe() accel/amdxdna: Require carveout when PASID and force_iova are disabled drm/amdkfd: always resume_all after suspend_all drm/amdgpu/gfx: move fault and EOP IRQ get/put to hw_init/hw_fini drm/amd/display: Consult MCCS FreeSync cap only if requested & supported drm/amd/pm: Use strscpy in profile mode parsing drm/amdkfd: Fix infinite loop parsing CRAT with zero subtype length drm/amdkfd: fix sysfs topology prop length on buffer truncation drm/amdgpu: drop retry loop in amdgpu_hmm_range_get_pages drm/amd/pm: bound OD parameter parsing to stack array size drm/amd/pm: Stop pp_od_clk_voltage emit at PAGE_SIZE drm/amdkfd: Unwind debug trap enable on copy_to_user failure drm/amdgpu: validate the mes firmware version for gfx12.1 drm/amdgpu: validate the mes firmware version for gfx12 drm/amdgpu: compare MES firmware version ucode for gfx11 drm/amdkfd: Add bounds check for AMDKFD_IOC_WAIT_EVENTS drm/amdgpu: restart the CS if some parts of the VM are still invalidated drm/amd/display: use unsigned types for local pipe and REG_GET counters ... |
||
|
Linus Torvalds
|
9c87e61e3c |
bpf-next-7.2
-----BEGIN PGP SIGNATURE-----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=rtQD
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"Major changes:
- Recover from BPF arena page faults using a scratch page and add
ptep_try_set() for lockless empty-slot installs on x86 and arm64.
This allows BPF kfuncs to access arena pointers directly.
The 'arena_direct_access' stable branch was created for this work
and was pulled into sched-ext and bpf-next trees (Tejun Heo, Kumar
Kartikeya Dwivedi)
- Lift old restriction and support 6+ arguments in BPF programs and
kfuncs on x86 and arm64 (Yonghong Song, Puranjay Mohan)
Other features and fixes:
- Add 24-bit BTF vlen and reclaim unused bits in the BTF UAPI to ease
addition of new BTF kinds (Alan Maguire)
- Raise the maximum BPF call chain depth from 8 to 16 frames (Alexei
Starovoitov)
- Refactor object relationship tracking in the verifier and fix a
dynptr use-after-free bug (Amery Hung)
- Harden the signed program loader and reject exclusive maps as inner
maps (Daniel Borkmann)
- Replace the verifier min/max bounds fields with a circular number
(cnum) representation and improve 32->64 bit range refinements
(Eduard Zingerman)
- Introduce the arena library and runtime (libarena) with a buddy
allocator, rbtree and SPMC queue data structures, ASAN support and
a parallel test harness. Allow subprograms to return arena pointers
and switch to a BTF type-tag based __arena annotation (Emil
Tsalapatis)
- Cache build IDs in the sleepable stackmap path and avoid faultable
build ID reads under mm locks (Ihor Solodrai)
- Introduce the tracing_multi link to attach a single BPF program to
many kernel functions at once. Allow specifying the uprobe_multi
target via FD (Jiri Olsa)
- Extend the bpf_list family of kfuncs with bpf_list_add/del(), and
bpf_list_is_first/is_last/empty() (Kaitao Cheng)
- Extend the BPF syscall with common attributes support for
prog_load, btf_load and map_create (Leon Hwang)
- Wrap rhashtable as BPF map (Mykyta Yatsenko, Herbert Xu)
- Add sleepable support for tracepoint programs and fix deadlocks in
LRU map due to NMI reentry (Mykyta Yatsenko)
- Fix OOB access in bpf_flow_keys, fix nullness analysis of inner
arrays, enforce write checks for global subprograms (Nuoqi Gui)
- Report the maximum combined stack depth and print a breakdown of
instructions processed per subprogram (Paul Chaignon)
- Add an XDP load-balancer benchmark and arm64 JIT support for stack
arguments (Puranjay Mohan)
- Add kfuncs to traverse over wakeup_sources (Samuel Wu)
- Allow sleepable BPF programs to use LPM trie maps directly (Vlad
Poenaru)
- Many more fixes and cleanups across the verifier, BTF, sockmap,
devmap, bpffs, security hooks, s390/riscv/loongarch JITs,
rqspinlock, libbpf, bpftool, selftests"
* tag 'bpf-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (336 commits)
selftests/bpf: Work around llvm stack overflow in crypto progs
selftests/bpf: add test for bpf_msg_pop_data() overflow
bpf, sockmap: fix integer overflow in bpf_msg_pop_data() bounds check
sockmap: Fix use-after-free in udp_bpf_recvmsg()
bpf, sockmap: keep sk_msg copy state in sync
bpf, sockmap: Fix wrong rsge offset in bpf_msg_push_data()
bpf, sockmap: reject overflowing copy + len in bpf_msg_push_data()
selftsets/bpf: Retry map update on helper_fill_hashmap()
selftests/bpf: Add test for sleepable lsm_cgroup rejection
selftests/bpf: Add test to verify the fix for bpf_setsockopt() helper
bpf: Fix bpf_get/setsockopt to tos for ipv4-mapped ipv6 socket
selftests/bpf: Avoid static LLVM linking for cross builds
selftests/bpf: Use common CFLAGS for urandom_read
selftests/bpf: Initialize operation name before use
tools/bpf: build: Append extra cflags
libbpf: Initialize CFLAGS before including Makefile.include
bpftool: Append extra host flags
bpftool: Avoid adding EXTRA_CFLAGS to HOST_CFLAGS
bpftool: Pass host flags to bootstrap libbpf
selftests/bpf: correct CONFIG_PPC64 macro name in comment
...
|
||
|
Linus Torvalds
|
b85966adbf |
Networking changes for 7.2.
Core & protocols
----------------
- Work on removing rtnl_lock protection throughout the stack continues.
In this chapter:
- don't use rtnl_lock for IPv6 multicast routing configuration
- don't take rtnl_lock in ethtool for modern drivers
- prepare Qdisc dump callbacks for rtnl_lock removal
- Support dumping just ifindex + name of all interfaces, under RCU.
It's a common operation for Netlink CLI tools (when translating
names to ifindexes) and previously required full rtnl_lock.
- Support dumping qdiscs and page pools for a specific netdev. Even tho
user space wants a dump of all netdevs, most of the time, the OOO
programming model results in repeating the dump for each netdev.
Which, in absence of a cache, leads to a O(n^2) behavior.
- Flush nexthops once on multi-nexthop removal (e.g. when device goes
down), another O(n^2) -> O(n) improvement.
- Rehash locally generated traffic to a different nexthop on retransmit
timeout.
- Honor oif when choosing nexthop for locally generated IPv6 traffic.
- Convert TCP Auth Option to crypto library, and drop non-RFC algos.
- Increase subflow limits in MPTCP to 64 and endpoint limit to 256.
- Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need
to selectively skip reporting of the standard TCP Timestamp option,
because they won't fit into the header space together (12 + 30 > 40).
- Support using bridge neighbor suppression, Duplicate Address
Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN
deployments, e.g. VXLAN fabrics (IPv4 and IPv6).
- Improve link state reporting for upper netdevs (e.g. macvlan) over
tunnel devices (again, mostly for EVPN deployments).
- Support binding GENEVE tunnels to a local address.
- Speed up UDP tunnel destruction (remove one synchronize_rcu()).
- Support exponential field encoding in multicast (IGMPv3 and MLDv2).
- Support attaching PSP crypto offload to containers (veth, netkit).
- Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows
migrating individual IPsec SAs independently of their policies.
The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA
migration, lacks SPI for unique SA identification, and cannot express
reqid changes or migrate Transport mode selectors. The new interface
identifies the SA via SPI and mark, supports reqid changes, address
family changes, encap removal, and uses an atomic create+install
flow under x->lock to prevent SN/IV reuse during AEAD SA migration.
- Implement GRO/GSO support for PPPoE.
- Convert sockopt callbacks in a number of protocols to iov_iter.
Cross-tree stuff
----------------
- Remove support for Crypto TFM cloning (unblocked after the TCP Auth
Option rework). This feature regressed performance for all crypto API
users, since it changed crypto transformation objects into reference-
-counted objects.
- Add FCrypt-PCBC implementation to rxrpc and remove it from the global
crypto API as obsolete and insecure.
Wireless
--------
- Major rework of station bandwidth handling, fixing issues with lower
capability than AP.
- Cleanups for EMLSR spec issues (drafts differed).
- More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast,
schedule improvements, multi-station etc.)
- Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work
(e.g. non-primary channel access, UHR DBE support).
- Fine Timing Measurement ranging (i.e. distance measurement) APIs.
Netfilter
---------
- Use per-rule hash initval in nf_conncount. This avoids unnecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
- Various safety improvements, both in packet parsing and object
lifetimes. Notably add refcounts to conntrack timeout policy.
Deletions
---------
- Remove TLS + sockmap integration. TLS wants to pin user pages
to avoid a copy, and sockmap wants to write to the input stream.
More work on this integration is clearly needed, and we can't find
any users (original author admitted that they never deployed it).
- Remove support for TLS offload with TCP Offload Engine (the far
more common opportunistic offload is retained). The locking looks
unfixable (driver sleeps under TCP spin locks) and people from
the vendor that added this are AWOL.
- Remove more ATM code, trying to leave behind only what PPPoATM needs,
AAL5 and br2684 with permanent circuits.
- Remove AppleTalk. Let it join hamradio in our out of tree protocol
graveyard, I mean, repository.
- Disable 32-bit x_tables compatibility (32bit binaries on 64bit kernel)
interface in user namespaces. To be deleted completely, soon.
- Remove 5/10 MHz support from cfg80211/mac80211.
Drivers
-------
- Software:
- Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit).
- bonding: add knob to strictly follow 802.3ad for link state.
- New drivers:
- Alibaba Elastic Ethernet Adaptor (cloud vNIC).
- NXP NETC switch within i.MX94.
- DPLL:
- Add operational state to pins (implement in zl3073x).
- Add generic DPLL type, for daisy-chaining DPLLs (implement in ice).
- Ethernet high-speed NICs:
- Huawei (hinic3):
- enhance tc flow offload support with queue selection, tunnels
- nVidia/Mellanox:
- avoid over-copying payload to the skb's linear part (up to 60%
win for LRO on slow CPUs like ARM64 V2)
- expose more per-queue stats over the standard API
- support additional, unprivileged PFs in the DPU configuration
- support Socket Direct (multi-PF) with switchdev offloads
- add a pool / frag allocator for DMA mapped buffers for control
objects, save memory on systems with 64kB page size
- take advantage of the ability to dynamically change RSS table
size, even when table is configured by the user
- increase the max RSS table size for even traffic distribution
- Ethernet NICs:
- Marvell/Aquantia:
- AQC113 PTP support
- Realtek USB (r8152):
- support 10Gbit Link Speeds and Energy-Efficient Ethernet (EEE)
- support firmware loaded (for RTL8157/RTL8159)
- support for the RTL8159
- Intel (ixgbe):
- support Energy-Efficient Ethernet (EEE) on E610 devices
- Ethernet switches:
- Airoha:
- support multiple netdevs on a single GDM block / port
- Marvell (mv88e6xxx):
- support SERDES of mv88e6321
- Microchip (ksz8/9):
- rework the driver callbacks to remove one indirection layer
- Motorcomm (yt921x):
- support port rate policing
- support TBF qdisc offload
- support ACL/flower offload
- nVidia/Mellanox:
- expose per-PG rx_discards
- Realtek:
- rtl8365mb: bridge offloading and VLAN support
- Ethernet PHYs:
- Airoha:
- support Airoha AN8801R Gigabit PHYs.
- Micrel:
- implement 3 low-loss cable tunables
- Realtek:
- support MDI swapping for RTL8226-CG
- support MDIO for RTL931x
- Qualcomm:
- at803x: Rx and Tx clock management for IPQ5018 PHY
- Motorcomm:
- support YT8522 100M RMII PHY
- set drive strength in YT8531s RGMII
- TI:
- dp83822: add optional external PHY clock
- Bluetooth:
- hci_sync: add support for HCI_LE_Set_Host_Feature [v2]
- SMP: use AES-CMAC library API
- Intel:
- support Product level reset
- support smart trigger dump
- Mediatek:
- add event filter to filter specific event
- Realtek:
- fix RTL8761B/BU broken LE extended scan
- WiFi:
- Broadcom (b43):
- new support for a 11n device
- MediaTek (mt76):
- support mt7927
- mt792x: broken usb transport detection
- mt7921: regulatory improvements
- Qualcomm (ath9k):
- GPIO interface improvements
- Qualcomm (ath12k):
- WDS support
- replace dynamic memory allocation in WMI Rx path
- thermal throttling/cooling device support
- 6 GHz incumbent interference detection
- channel 177 in 5 GHz
- Realtek (rt89):
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=oNfE
-----END PGP SIGNATURE-----
Merge tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Work on removing rtnl_lock protection throughout the stack
continues. In this chapter:
- don't use rtnl_lock for IPv6 multicast routing configuration
- don't take rtnl_lock in ethtool for modern drivers
- prepare Qdisc dump callbacks for rtnl_lock removal
- Support dumping just ifindex + name of all interfaces, under RCU.
It's a common operation for Netlink CLI tools (when translating
names to ifindexes) and previously required full rtnl_lock.
- Support dumping qdiscs and page pools for a specific netdev. Even
tho user space wants a dump of all netdevs, most of the time, the
OOO programming model results in repeating the dump for each
netdev. Which, in absence of a cache, leads to a O(n^2) behavior.
- Flush nexthops once on multi-nexthop removal (e.g. when device goes
down), another O(n^2) -> O(n) improvement.
- Rehash locally generated traffic to a different nexthop on
retransmit timeout.
- Honor oif when choosing nexthop for locally generated IPv6 traffic.
- Convert TCP Auth Option to crypto library, and drop non-RFC algos.
- Increase subflow limits in MPTCP to 64 and endpoint limit to 256.
- Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need
to selectively skip reporting of the standard TCP Timestamp option,
because they won't fit into the header space together (12 + 30 >
40).
- Support using bridge neighbor suppression, Duplicate Address
Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN
deployments, e.g. VXLAN fabrics (IPv4 and IPv6).
- Improve link state reporting for upper netdevs (e.g. macvlan) over
tunnel devices (again, mostly for EVPN deployments).
- Support binding GENEVE tunnels to a local address.
- Speed up UDP tunnel destruction (remove one synchronize_rcu()).
- Support exponential field encoding in multicast (IGMPv3 and MLDv2).
- Support attaching PSP crypto offload to containers (veth, netkit).
- Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows
migrating individual IPsec SAs independently of their policies.
The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA
migration, lacks SPI for unique SA identification, and cannot
express reqid changes or migrate Transport mode selectors.
The new interface identifies the SA via SPI and mark, supports
reqid changes, address family changes, encap removal, and uses an
atomic create+install flow under x->lock to prevent SN/IV reuse
during AEAD SA migration.
- Implement GRO/GSO support for PPPoE.
- Convert sockopt callbacks in a number of protocols to iov_iter.
Cross-tree stuff:
- Remove support for Crypto TFM cloning (unblocked after the TCP Auth
Option rework). This feature regressed performance for all crypto
API users, since it changed crypto transformation objects into
reference-counted objects.
- Add FCrypt-PCBC implementation to rxrpc and remove it from the
global crypto API as obsolete and insecure.
Wireless:
- Major rework of station bandwidth handling, fixing issues with
lower capability than AP.
- Cleanups for EMLSR spec issues (drafts differed).
- More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast,
schedule improvements, multi-station etc.)
- Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work
(e.g. non-primary channel access, UHR DBE support).
- Fine Timing Measurement ranging (i.e. distance measurement) APIs.
Netfilter:
- Use per-rule hash initval in nf_conncount. This avoids unnecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
- Various safety improvements, both in packet parsing and object
lifetimes. Notably add refcounts to conntrack timeout policy.
Deletions:
- Remove TLS + sockmap integration. TLS wants to pin user pages to
avoid a copy, and sockmap wants to write to the input stream. More
work on this integration is clearly needed, and we can't find any
users (original author admitted that they never deployed it).
- Remove support for TLS offload with TCP Offload Engine (the far
more common opportunistic offload is retained). The locking looks
unfixable (driver sleeps under TCP spin locks) and people from the
vendor that added this are AWOL.
- Remove more ATM code, trying to leave behind only what PPPoATM
needs, AAL5 and br2684 with permanent circuits.
- Remove AppleTalk. Let it join hamradio in our out of tree protocol
graveyard, I mean, repository.
- Disable 32-bit x_tables compatibility (32bit binaries on 64bit
kernel) interface in user namespaces. To be deleted completely,
soon.
- Remove 5/10 MHz support from cfg80211/mac80211.
Drivers:
- Software:
- Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit)
- bonding: add knob to strictly follow 802.3ad for link state
- New drivers:
- Alibaba Elastic Ethernet Adaptor (cloud vNIC).
- NXP NETC switch within i.MX94.
- DPLL:
- Add operational state to pins (implement in zl3073x).
- Add generic DPLL type, for daisy-chaining DPLLs (implement in ice).
- Ethernet high-speed NICs:
- Huawei (hinic3):
- enhance tc flow offload support with queue selection,
tunnels
- nVidia/Mellanox:
- avoid over-copying payload to the skb's linear part (up to
60% win for LRO on slow CPUs like ARM64 V2)
- expose more per-queue stats over the standard API
- support additional, unprivileged PFs in the DPU
configuration
- support Socket Direct (multi-PF) with switchdev offloads
- add a pool / frag allocator for DMA mapped buffers for
control objects, save memory on systems with 64kB page size
- take advantage of the ability to dynamically change RSS
table size, even when table is configured by the user
- increase the max RSS table size for even traffic
distribution
- Ethernet NICs:
- Marvell/Aquantia:
- AQC113 PTP support
- Realtek USB (r8152):
- support 10Gbit Link Speeds and Energy-Efficient Ethernet
(EEE)
- support firmware loaded (for RTL8157/RTL8159)
- support for the RTL8159
- Intel (ixgbe):
- support Energy-Efficient Ethernet (EEE) on E610 devices
- Ethernet switches:
- Airoha:
- support multiple netdevs on a single GDM block / port
- Marvell (mv88e6xxx):
- support SERDES of mv88e6321
- Microchip (ksz8/9):
- rework the driver callbacks to remove one indirection layer
- Motorcomm (yt921x):
- support port rate policing
- support TBF qdisc offload
- support ACL/flower offload
- nVidia/Mellanox:
- expose per-PG rx_discards
- Realtek:
- rtl8365mb: bridge offloading and VLAN support
- Ethernet PHYs:
- Airoha:
- support Airoha AN8801R Gigabit PHYs.
- Micrel:
- implement 3 low-loss cable tunables
- Realtek:
- support MDI swapping for RTL8226-CG
- support MDIO for RTL931x
- Qualcomm:
- at803x: Rx and Tx clock management for IPQ5018 PHY
- Motorcomm:
- support YT8522 100M RMII PHY
- set drive strength in YT8531s RGMII
- TI:
- dp83822: add optional external PHY clock
- Bluetooth:
- hci_sync: add support for HCI_LE_Set_Host_Feature [v2]
- SMP: use AES-CMAC library API
- Intel:
- support Product level reset
- support smart trigger dump
- Mediatek:
- add event filter to filter specific event
- Realtek:
- fix RTL8761B/BU broken LE extended scan
- WiFi:
- Broadcom (b43):
- new support for a 11n device
- MediaTek (mt76):
- support mt7927
- mt792x: broken usb transport detection
- mt7921: regulatory improvements
- Qualcomm (ath9k):
- GPIO interface improvements
- Qualcomm (ath12k):
- WDS support
- replace dynamic memory allocation in WMI Rx path
- thermal throttling/cooling device support
- 6 GHz incumbent interference detection
- channel 177 in 5 GHz
- Realtek (rt89):
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations"
* tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1778 commits)
ipv4: fib_rule: Move fib4_rules_exit() to ->exit().
net: serialize netif_running() check in enqueue_to_backlog()
net: skmsg: preserve sg.copy across SG transforms
appletalk: move the protocol out of tree
appletalk: stop storing per-interface state in struct net_device
selftests/bpf: test that TLS crypto is rejected on a sockmap socket
selftests/bpf: drop the unused kTLS program from test_sockmap
selftests/bpf: remove sockmap + ktls tests
tls: remove dead sockmap (psock) handling from the SW path
tls: reject the combination of TLS and sockmap
atm: remove orphaned uAPI for deleted drivers, protocols and SVCs
atm: remove unused ATM PHY operations
atm: remove the unused pre_send and send_bh device operations
atm: remove the unused change_qos device operation
atm: remove SVC socket support and the signaling daemon interface
atm: remove the local ATM (NSAP) address registry
atm: remove dead SONET PHY ioctls
atm: remove the unused send_oam / push_oam callbacks
atm: remove AAL3/4 transport support
net: dsa: sja1105: fix lastused timestamp in flower stats
...
|
||
|
Jakub Kicinski
|
8f9616500c |
atm: remove orphaned uAPI for deleted drivers, protocols and SVCs
ATM removals have left a number of uAPI headers and ioctl
definitions with no in-kernel implementation behind them:
- device headers for adapters deleted with the legacy PCI/SBUS drivers:
atm_eni.h, atm_he.h, atm_idt77105.h, atm_nicstar.h, atm_zatm.h and
the atmtcp pair atm_tcp.h / <linux/atm_tcp.h>
- protocol headers for the removed CLIP, LANE and MPOA stacks:
atmarp.h, atmclip.h, atmlec.h, atmmpc.h
- atmsvc.h and the SVC / p2mp / local-address ioctls in atmdev.h
(ATM_{GET,RST,ADD,DEL}ADDR, ATM_{ADD,DEL,GET}LECSADDR,
ATM_{ADD,DROP}PARTY) left behind by the SVC and address-registry
removals
None of these are referenced by any remaining in-tree code.
Let's try to delete all this. Chances are nobody cares about
these headers any more. I'm keeping this separate from the
kernel side code changes for ease of revert, in case I am
proven wrong...
Link: https://patch.msgid.link/20260615194416.752559-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Linus Torvalds
|
ba9c792c82 |
for-7.2/block-20260615
-----BEGIN PGP SIGNATURE-----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=upvV
-----END PGP SIGNATURE-----
Merge tag 'for-7.2/block-20260615' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- Per-controller admin and IO timeout sysfs attributes, and
letting the block layer set request timeouts (Maurizio,
Maximilian)
- Multipath passthrough iostats, and PCI P2PDMA enablement for
multipath devices (Keith, Kiran)
- A new diag sysfs attribute group exporting per-controller
counters (retries, multipath failover, error counters, requeue
and failure counts, reset and reconnect events) (Nilay)
- FDP configuration validation and bounds check fixes (liuxixin)
- Various nvmet fixes, including a pre-auth out-of-bounds read in
the Discovery Get Log Page handler, auth payload bounds
validation, and tcp error-path leak fixes (Bryam, Tianchu,
Geliang)
- nvme-tcp lockdep and workqueue fixes (Shin'ichiro, Kuniyuki,
Eric)
- Assorted other fixes and cleanups (John, Yao, Chao, Mateusz,
Achkinazi, Wentao)
- MD pull request via Yu Kuai:
- raid1/raid10 fixes for a deadlock in the read error recovery
path, error-path detection and bio accounting with cloned bios,
and an nr_pending leak in the REQ_ATOMIC bad-block error path
(Abd-Alrhman)
- PCI P2PDMA propagation from member devices to the RAID device
(Kiran)
- dm-raid bio requeue fix, and various smaller fixes and cleanups
(Benjamin, Chen, Li, Thorsten)
- Enable Clang lock context analysis for the block layer, with the
accompanying annotations across queue limits, the blk_holder_ops
callbacks, crypto, cgroup, iocost, kyber and mq-deadline (Bart)
- Block status code infrastructure work: a tagged status table, a
str_to_blk_op() helper, a bio_endio_status() helper, and on top of
that a new configurable block-layer error injection facility
(Christoph)
- DRBD netlink rework, replacing the genl_magic machinery with explicit
netlink serialization and moving the DRBD UAPI headers to
include/uapi/linux/ (Christoph Böhmwalder)
- bvec improvements: a bvec_folio() helper and making the bvec_iter
helpers proper inline functions (Willy, Christoph)
- ublk cleanups and a canceling-flag fix for the disk-not-allocated
case (Caleb, Ming)
- Partition handling fixes: bound the AIX pp_count scan, fix an of_node
refcount leak, and replace __get_free_page() with kmalloc() (Bryam,
Wentao, Mike)
- Convert numa_node to int in blk_mq_hw_ctx and ->init_request, and add
WQ_PERCPU to the block workqueue users (Mateusz, Marco)
- Block statistics and tracing: propagate in-flight to the whole disk
on partition IO, export passthrough stats, and a new
block_rq_tag_wait tracepoint (Tang, Keith, Aaron)
- A round of removals, unexports and cleanups across bio, direct-io and
the bvec helpers (Christoph)
- Various driver fixes (mtip32xx use-after-free, rbd snap_count
validation and strscpy conversion, nbd socket lockdep reclassify,
virtio-blk zone report clamp, floppy) and a batch of MAINTAINERS
email/list updates (Coly, Li, Yu, Christoph Böhmwalder)
- Other little fixes and cleanups all over
* tag 'for-7.2/block-20260615' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (117 commits)
MAINTAINERS: Update Coly Li's email address
block: check bio split for unaligned bvec
nbd: Reclassify sockets to avoid lockdep circular dependency
block: add configurable error injection
block: add a str_to_blk_op helper
block: add a "tag" for block status codes
block: add a macro to initialize the status table
floppy: Drop unused pnp driver data
block: propagate in_flight to whole disk on partition I/O
virtio-blk: clamp zone report to the report buffer capacity
block: optimize I/O merge hot path with unlikely() hints
drivers/block/rbd: Use strscpy() to copy strings into arrays
partitions: aix: bound the pp_count scan to the ppe array
block: Enable lock context analysis
block/mq-deadline: Make the lock context annotations compatible with Clang
block/Kyber: Make the lock context annotations compatible with Clang
block/blk-mq-debugfs: Improve lock context annotations
block/blk-iocost: Inline iocg_lock() and iocg_unlock()
block/blk-iocost: Split ioc_rqos_throttle()
block/crypto: Annotate the crypto functions
...
|
||
|
Linus Torvalds
|
9b40ba14ed |
for-7.2/io_uring-20260615
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmowCCYQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgprbuEACf4MxZZvzd1Be5Fneo4ghy0IjJ0s8j67yo hERtfO0TPCFPvFi+cWmSQo/YTIhi62Z1nFro3Cr9opTF38NypbN2kB642KOaQPse f1LVQDg1p5MIj2bMGgBQsYeLlGipRwm/vLN7qX+Dfv6jL4Yq7KuIEtxkBr2UJefY FUEhW5xm45DgRriyZSn+Gn39yLB4XGL8pEntqrSMlrTw3fI8ZzyIw5w6e8Kgn/ES upVo8oxnrUSlPrGrfH2Eu42sFixWko9QULwASNgXsIT3yBRZbYYyBjXmWAQGER6k D3Nn5Zt/UogyMg6BLb/S2dgCnFn2VPKPD8l//4IPQrAAhPdtWpxaTjQUXq0c2w4M IaGD1EQDYw/VBc6jjRPAuqwEmKZmTXZirfXamvF4Y2MtSz0b84LulaeqqwGvmtUT Z2pOaIZBffJ1E//B4FpiG1xuwHpchc3F6esP7FyhyRlWGP93WR3ADo2em7/jKxEi IOFjXHAOO70C1wpdOgAxToRggc4GV16RAx+v4/GFRUI1m6okuxiwTxle6Ig+H4eR zFXBvroz7PDDaiqbyGk5kIQfOVhwmPnp9EZUUJIf4h9lIPgwJAjb4yLwcF8ySXyg x8C+Vp4DP1r0xccZLkkElIzOmmeR4bUaBeyFY33pT83WchnU1NxusBpEVpRL1FPf YR8Icz8F1A== =pkmg -----END PGP SIGNATURE----- Merge tag 'for-7.2/io_uring-20260615' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux Pull io_uring updates from Jens Axboe: - Rework the task_work infrastructure. Both the local (DEFER_TASKRUN) and the normal (tctx) task_work lists were llist based, which is LIFO ordered, and hence each run had to do an O(n) list reversal pass first to restore queue order. Additionally, to cap the amount of task_work run, each method needed a retry list as well. Add a lockless MPCS FIFO queue (based on Dmitry Vyukov's intrusive MPSC algorithm) and switch both task_work lists to it. It performs better than llists and we can then also ditch the retry lists as well as entries are popped one-at-the-time. On top of those changes, run the tctx fallback task_work directly and remove the now-unused per-ctx fallback machinery entirely. - zcrx user notifications. Add a mechanism for zcrx to communicate conditions back to userspace via a dedicated CQE, with the initial users being notification on running out of buffers and on a frag copy fallback, plus shared-memory notification statistics. Alongside that, a series of zcrx reliability and cleanup fixes: more reliable scrubbing, poisoning pointers on unregistration, dropping an extra ifq close, adding a ctx back-pointer, reordering fd allocation in the export path, and killing a dead 'sock' member. - Allow using io_uring registered buffers for plain SEND and RECV, not just for the zero-copy send path. This enables targets like ublk's NBD backend to push/pull IO data directly to/from a registered buffer over a plain send/recv on a TCP socket. - Registered buffer improvements: account huge pages correctly, bump the io_mapped_ubuf length field to size_t, and raise the previous 1GB registered buffer size limit. - Restrict the ctx access exposed to io_uring BPF struct_ops programs by handing them an opaque type rather than the full io_ring_ctx, and add a separate MAINTAINERS entry for the bpf-ops code. - Allow opcode filtering on IORING_OP_CONNECT. - Validate ring-provided buffer addresses with access_ok(), and align the legacy buffer add limit with MAX_BIDS_PER_BGID. - Various other cleanups and minor fixes, including avoiding msghdr async data on connect/bind, dropping async_size for OP_LISTEN, making the POLL_FIRST receive side checks consistent, re-checking IO_WQ_BIT_EXIT for each linked work item, and using trace_call__##name() at guarded tracepoint call sites. * tag 'for-7.2/io_uring-20260615' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (31 commits) io_uring/bpf-ops: add a separate maintainer entry io_uring/net: make POLL_FIRST receive side checks consistent io_uring: remove the per-ctx fallback task_work machinery io_uring: run the tctx task_work fallback directly io_uring: switch normal task_work to a mpscq io_uring: switch local task_work to a mpscq io_uring/mpscq: add lockless multi-producer, single-consumer FIFO queue io_uring: grab RCU read lock marking task run io_uring/zcrx: kill dead 'sock' member in struct io_zcrx_args io_uring/kbuf: validate ring provided buffer addresses with access_ok() io_uring/net: support registered buffer for plain send and recv io_uring/nop: Drop a wrong comment in struct io_nop io_uring/net: Remove async_size for OP_LISTEN io_uring/net: Avoid msghdr on op_connect/op_bind async data io_uring/bpf-ops: restrict ctx access to BPF io_uring/io-wq: re-check IO_WQ_BIT_EXIT for each linked work item io_uring/kbuf: align legacy buffer add limit with MAX_BIDS_PER_BGID io_uring/zcrx: add shared-memory notification statistics io_uring/zcrx: notify user on frag copy fallback io_uring/zcrx: notify user when out of buffers ... |
||
|
Linus Torvalds
|
31b706da2c |
for-7.2-tag
-----BEGIN PGP SIGNATURE-----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=fX+v
-----END PGP SIGNATURE-----
Merge tag 'for-7.2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"The most noticeable change is to enable large folios by default, it's
been in testing for a few releases. Related to that is huge folio
support (still under experimental config). Otherwise a few ioctl
updates, performance improvements and usual fixes and core changes.
User visible changes:
- enable large folios by default, added in 6.17 (under experimental
build), no feature limitations, a big change internally
- new ioctl to return raw checksums to userspace (a bit tricky given
compression and tail extents), can be used for mkfs and
deduplication optimizations
- provide stable UUID for e.g. overlayfs and temp_fsid, also
reflected in statvfs() field f_fsid, internal dev_t is hashed in to
allow cloning
- add 32bit compat version of GET_SUBVOL_INFO ioctl
- in experimental build, support huge folios (up to 2M)
Performance related improvements/changes:
- limit bio size to the estimated optimum derived from the queue,
this prevents build up of too much data for writeback, which could
cause latency spikes (reported improvement 15% on sequential
writes)
- don't force direct IO to be serialized, forgotten change during
mount API port, brings back +60% of throughput
- lockless calculation of number of shrinkable extent maps, improve
performance with many memcg allocated objects
Notable fixes:
- in zoned mode, fix a deadlock due to zone reclaim and relocation
when space needs to be flushed
- don't trim device which is internally not tracked as writeable
(e.g. when missing device is being rescanned)
- fix deadlock when cloning inline extent and mounted with
flushoncommit
- fix false IO failures after direct IO falls back to buffered write
in some cases
Core:
- remove COW fixup mechanism completely; detect and fix changes to
pages outside of filesystem tracking, guaranteed since 5.8, grace
period is over
- remove 2K block size support, experimental to test subpage code on
x86_64 but now it would block folio changes
- tree-checker improvements of:
- free-space cache and tree items
- root reference and backref items
- extent state exceptions in reloc tree
- subpage mode updates:
- code optimizations, simplify tracking bitmaps
- re-enable readahead of compressed extent
- extend bitmap size to cover huge folios
- add tracepoints related to sync, tree-log and transactions
- device stats item tracking unification, remove item if there are no
stats recorded, also don't leave stale stats on replaced device
- allow extent buffer pages to be allocated as movable, to help page
migration
- added checks for proper extent buffer release
- btrfs.ko code size reduction due to transaction abort call
simplifications
- several struct size reductions
- more auto free conversions
- more verbose assertions"
* tag 'for-7.2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (130 commits)
btrfs: fix use-after-free after relocation failure with concurrent COW
btrfs: move WARN_ON on unexpected error in __add_tree_block()
btrfs: move locking into btrfs_get_reloc_bg_bytenr()
btrfs: lzo: reject compressed segment that overflows the compressed input
btrfs: retry faulting in the pages after a zero sized short direct write
btrfs: fix incorrect buffered IO fallback for append direct writes
btrfs: fix false IO failure after falling back to buffered write
btrfs: use verbose assertions in backref.c
btrfs: print a message when a missing device re-appears
btrfs: do not trim a device which is not writeable
btrfs: return real error after lookup failure in btrfs_ioctl_default_subvol()
btrfs: use mapping shared locking for reading super block
btrfs: use lockless read in nr_cached_objects shrinker callback
btrfs: switch local indicator variables to bools
btrfs: send: pass bool for pending_move and refs_processed parameters
btrfs: use shifts for sectorsize and nodesize
btrfs: fix deadlock cloning inline extent when using flushoncommit
btrfs: allocate eb-attached btree pages as movable
btrfs: add 32-bit compat ioctl for BTRFS_IOC_GET_SUBVOL_INFO
btrfs: derive f_fsid from on-disk fsid and dev_t
...
|
||
|
Linus Torvalds
|
7e54cdd056 |
watchdog updates and fixes for v7.2
* subsystem
- Unregister PM notifier on watchdog unregister
- Various documentation fixes and improvements
* Removed drivers
- Remove AMD Elan SC520 processor watchdog driver
- Drop SMARC-sAM67 support
- Remove driver for integrated WDT of ZFx86 486-based SoC
* New drivers
- Driver for Andes ATCWDT200
- Driver for Gunyah Watchdog
* Added support to existing drivers
- Add "apple,t8103-wdt" and "apple,t8122-wdt" compatibles to Apple
watchdog driver
- Add rockchip,rk3528-wdt and rockchip,rv1103b-wdt to snps,dw-wdt.yaml
- Document IPQ9650, IPQ5210, Shikra, Nord, and Hawi in qcom-wdt.yaml
Also document sram property and add support to get the bootstatus
to qcom wdt driver
- lenovo_se10_wdt: Fix use-after-rfree and add support for SE10 Gen 2
platform
- ti,rti-wdt: Add ti,am62l-rti-wdt compatible
- renesas: Document RZ/G3L support and rework example for
renesas,r9a09g057-wdt
* Other bug fixes and improvements
- Use named initializers (sc1200, ziirave_wdt)
- Allow pic32-dmt and pic32-wdt to be built with COMPILE_TEST
- realtek-otto: enable clock before using I/O, and prevent PHASE2 underflows
- rti_wdt: Add reaction control
- renesas,rzn1-wdt: Drop interrupt support and other cleanup
- gpio_wdt: Add ACPI support
- imx7ulp_wdt: Keep WDOG running until A55 enters WFI on i.MX94
- sprd_wdt: Remove redundant sprd_wdt_disable() on register failure
- bcm2835_wdt: Switch to new sys-off handler API
- sama5d4_wdt: Fix WDDIS detection on SAM9X60 and SAMA7G5
- hpwdt: Refine hpwdt message for UV platform
- Convert TS-4800 bindings to DT schema
- menz069_wdt: drop unneeded MODULE_ALIAS
- sp5100_tco: Use EFCH MMIO for newer Hygon FCH
-----BEGIN PGP SIGNATURE-----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=macd
-----END PGP SIGNATURE-----
Merge tag 'watchdog-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull watchdog updates and fixes from Guenter Roeck:
"Subsystem:
- Unregister PM notifier on watchdog unregister
- Various documentation fixes and improvements
Removed drivers:
- Remove AMD Elan SC520 processor watchdog driver
- Drop SMARC-sAM67 support
- Remove driver for integrated WDT of ZFx86 486-based SoC
New drivers:
- Driver for Andes ATCWDT200
- Driver for Gunyah Watchdog
Added support to existing drivers:
- Add "apple,t8103-wdt" and "apple,t8122-wdt" compatibles to Apple
watchdog driver
- Add rockchip,rk3528-wdt and rockchip,rv1103b-wdt to snps,dw-wdt.yaml
- Document IPQ9650, IPQ5210, Shikra, Nord, and Hawi in qcom-wdt.yaml
Also document sram property and add support to get the bootstatus
to qcom wdt driver
- lenovo_se10_wdt: Fix use-after-rfree and add support for SE10 Gen 2
platform
- ti,rti-wdt: Add ti,am62l-rti-wdt compatible
- renesas: Document RZ/G3L support and rework example for
renesas,r9a09g057-wdt
Other bug fixes and improvements:
- Use named initializers (sc1200, ziirave_wdt)
- Allow pic32-dmt and pic32-wdt to be built with COMPILE_TEST
- realtek-otto: enable clock before using I/O, and prevent PHASE2 underflows
- rti_wdt: Add reaction control
- renesas,rzn1-wdt: Drop interrupt support and other cleanup
- gpio_wdt: Add ACPI support
- imx7ulp_wdt: Keep WDOG running until A55 enters WFI on i.MX94
- sprd_wdt: Remove redundant sprd_wdt_disable() on register failure
- bcm2835_wdt: Switch to new sys-off handler API
- sama5d4_wdt: Fix WDDIS detection on SAM9X60 and SAMA7G5
- hpwdt: Refine hpwdt message for UV platform
- Convert TS-4800 bindings to DT schema
- menz069_wdt: drop unneeded MODULE_ALIAS
- sp5100_tco: Use EFCH MMIO for newer Hygon FCH"
* tag 'watchdog-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (58 commits)
watchdog: sc1200: Drop unused assignment of pnp_device_id driver data
watchdog: unregister PM notifier on watchdog unregister
dt-bindings: watchdog: qcom-wdt: Document IPQ5210 watchdog
watchdog: dev: convert to kernel-doc comments
watchdog: core: clean up some comments
watchdog: uapi: add comments for what bit masks apply to
watchdog: linux/watchdog.h: repair kernel-doc comments
watchdog: add devm_watchdog_register_device() to watchdog-kernel-api
watchdog: ziirave_wdt: Use named initializers for struct i2c_device_id
watchdog: realtek-otto: enable clock before using I/O
watchdog: realtek-otto: prevent PHASE2 underflows
dt-bindings: watchdog: qcom-wdt: Document IPQ9650 watchdog
dt-bindings: watchdog: renesas,rzn1-wdt: interrupts are not required
dt-bindings: watchdog: apple,wdt: Add t8122 compatible
watchdog: apple: Add "apple,t8103-wdt" compatible
watchdog: rzn1: remove now obsolete interrupt support
dt-bindings: watchdog: Add watchdog compatible for RK3528
watchdog: convert the Kconfig dependency on OF_GPIO to OF
watchdog: Remove AMD Elan SC520 processor watchdog driver
watchdog: lenovo_se10_wdt: Fix use-after-free and resource leak risk
...
|
||
|
Dragos Tatulea
|
5c4adb7fb4 |
netdev: expose io_uring rx_page_order order via netlink
This adds observability for the io_uring zcrx rx-buf-len configuration. Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Yael Chemla <ychemla@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Acked-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://patch.msgid.link/20260612211709.1456966-3-dtatulea@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Paolo Bonzini
|
4dffb0a5d1 |
KVM: s390: New features for 7.2
New features for 7.2 for KVM/s390: * KVM_PRE_FAULT_MEMORY support * Support for 2G hugepages * Support for the ASTFLEIE 2 facility * kvm_arch_set_irq_inatomic Fast Inject * Fix potential leak of uninitialized bytes -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEoWuZBM6M3lCBSfTnuARItAMU6BMFAmov7sIACgkQuARItAMU 6BNlChAArkYNfy+aHUKDV+fTbYobSaCLPTTEXtDwkykPIC4CQa55kc/rcXWPxtw8 C9YupDZ/LFsfbP/bUKXssPcU5fOt2K4BMJOiB/3J4MrfCdEM50KEOGb20f7TRf2Y CYVOFEjHum2nA3N7p13VLbUGj+yCzisMCejeVXDQY5nStn+4pcE1S1CZKuZ2k7Vz a72CGg6CUs5Ee4yRlsqoUzpqtEIGbOWVbJKVjf7pRSqBgYQQrrpJ0ImleujrAsSA eKWnAKUJ/JxpnRRZtudl663v+YXZs2q4cHsKACZ0eugSQIKEU1RYaobz6/e2D7g6 AOxKurd0YPCrtEulZzwQT+uY3KJXVt8J6KBHEeJiTLeG2Dmm7/dL6t4Y9CNqpGK/ nx/U05tGqcJ2cvWGAB3NXVj3n1ocrgy9+OUCbLw9YaxeqEAdPKTeRqE4nl6+mla6 F0t1dEEqJNbm44rcH9sHLzJiOZh4ziKnLT0VwJFGwUDMcNsl+uNqZtl4tjWfD3+t 15nwUoOiVWPGKqSnXVl8QRCQvAmQ3wK7ThIR2MOCYM4y2sfdF+c5QjX1uznQHc5j 1o4oSjN1hDNxvjMzGOM2Xn3swtCPhCAzQZCr3JtZkB5je5jtV047uRJTYjqiXgKD FnQ7VQzDFTEDhhLWgJJNgjUrKScKfMSrQpapgu0LWSjqisjToHg= =GOQC -----END PGP SIGNATURE----- Merge tag 'kvm-s390-next-7.2-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: New features for 7.2 New features for 7.2 for KVM/s390: * KVM_PRE_FAULT_MEMORY support * Support for 2G hugepages * Support for the ASTFLEIE 2 facility * kvm_arch_set_irq_inatomic Fast Inject * Fix potential leak of uninitialized bytes |
||
|
Linus Torvalds
|
764e77d868 |
Locking updates for v7.2:
Futex updates:
- Optimize futex hash bucket access patterns (Peter Zijlstra)
- Large series to address the robust futex unlock race for real,
by Thomas Gleixner:
"The robust futex unlock mechanism is racy in respect
to the clearing of the robust_list_head::list_op_pending
pointer because unlock and clearing the pointer are not
atomic. The race window is between the unlock and clearing the
pending op pointer. If the task is forced to exit in this
window, exit will access a potentially invalid pending op
pointer when cleaning up the robust list. That happens if
another task manages to unmap the object containing the lock
before the cleanup, which results in an UAF. In the worst case
this UAF can lead to memory corruption when unrelated content
has been mapped to the same address by the time the access
happens.
User space can't solve this problem without help from the kernel.
This series provides the kernel side infrastructure to help it
along:
1) Combined unlock, pointer clearing, wake-up for the
contended case
2) VDSO based unlock and pointer clearing helpers with a
fix-up function in the kernel when user space was interrupted
within the critical section.
... with help by André Almeida:
- Add a note about robust list race condition (André Almeida)
- Add self-tests for robust release operations (André Almeida)
Context analysis updates:
- Implement context analysis for 'struct rt_mutex'.
(Bart Van Assche)
- Bump required Clang version to 23 (Marco Elver)
Guard infrastructure updates:
- Series to remove NULL check from unconditional guards
(Dmitry Ilvokhin)
Lockdep updates:
- Restore self-test migrate_disable() and sched_rt_mutex
state on PREEMPT_RT (Karl Mehltretter)
Membarriers updates:
- Use per-CPU mutexes for targeted commands (Aniket Gattani)
- Modernize membarrier_global_expedited with cleanup guards
(Aniket Gattani)
- Add rseq stress test for CFS throttle interactions (Aniket Gattani)
percpu-rwsems updates:
- Extract __percpu_up_read() to optimize inlining overhead
(Dmitry Ilvokhin)
Seqlocks updates:
- Allow UBSAN_ALIGNMENT to fail optimizing (Heiko Carstens)
Lock tracing:
- Add contended_release tracepoint to sleepable locks
such as mutexes, percpu-rwsems, rtmutexes, rwsems
and semaphores. (Dmitry Ilvokhin)
MAINTAINERS updates:
- MAINTAINERS: Add RUST [SYNC] entry (Boqun Feng)
Misc updates and fixes by Randy Dunlap, YE WEI-HONG,
Fabricio Parra, Dmitry Ilvokhin and Peter Zijlstra.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=gpHw
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2026-06-14' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Futex updates:
- Optimize futex hash bucket access patterns (Peter Zijlstra)
- Large series to address the robust futex unlock race for real, by
Thomas Gleixner:
"The robust futex unlock mechanism is racy in respect to the
clearing of the robust_list_head::list_op_pending pointer because
unlock and clearing the pointer are not atomic.
The race window is between the unlock and clearing the pending op
pointer. If the task is forced to exit in this window, exit will
access a potentially invalid pending op pointer when cleaning up
the robust list.
That happens if another task manages to unmap the object
containing the lock before the cleanup, which results in an UAF.
In the worst case this UAF can lead to memory corruption when
unrelated content has been mapped to the same address by the time
the access happens.
User space can't solve this problem without help from the kernel.
This series provides the kernel side infrastructure to help it
along:
1) Combined unlock, pointer clearing, wake-up for the
contended case
2) VDSO based unlock and pointer clearing helpers with a
fix-up function in the kernel when user space was interrupted
within the critical section.
... with help by André Almeida:
- Add a note about robust list race condition (André Almeida)
- Add self-tests for robust release operations (André Almeida)
Context analysis updates:
- Implement context analysis for 'struct rt_mutex'. (Bart Van Assche)
- Bump required Clang version to 23 (Marco Elver)
Guard infrastructure updates:
- Series to remove NULL check from unconditional guards (Dmitry
Ilvokhin)
Lockdep updates:
- Restore self-test migrate_disable() and sched_rt_mutex state on
PREEMPT_RT (Karl Mehltretter)
Membarriers updates:
- Use per-CPU mutexes for targeted commands (Aniket Gattani)
- Modernize membarrier_global_expedited with cleanup guards (Aniket
Gattani)
- Add rseq stress test for CFS throttle interactions (Aniket Gattani)
percpu-rwsems updates:
- Extract __percpu_up_read() to optimize inlining overhead (Dmitry
Ilvokhin)
Seqlocks updates:
- Allow UBSAN_ALIGNMENT to fail optimizing (Heiko Carstens)
Lock tracing:
- Add contended_release tracepoint to sleepable locks such as
mutexes, percpu-rwsems, rtmutexes, rwsems and semaphores (Dmitry
Ilvokhin)
MAINTAINERS updates:
- MAINTAINERS: Add RUST [SYNC] entry (Boqun Feng)
Misc updates and fixes by Randy Dunlap, YE WEI-HONG, Fabricio Parra,
Dmitry Ilvokhin and Peter Zijlstra"
* tag 'locking-core-2026-06-14' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (36 commits)
locking: Add contended_release tracepoint to sleepable locks
locking/percpu-rwsem: Extract __percpu_up_read()
tracing/lock: Remove unnecessary linux/sched.h include
futex: Optimize futex hash bucket access patterns
rust: sync: completion: Mark inline complete_all and wait_for_completion
MAINTAINERS: Add RUST [SYNC] entry
cleanup: Specify nonnull argument index
selftests: futex: Add tests for robust release operations
Documentation: futex: Add a note about robust list race condition
x86/vdso: Implement __vdso_futex_robust_try_unlock()
x86/vdso: Prepare for robust futex unlock support
futex: Provide infrastructure to plug the non contended robust futex unlock race
futex: Add robust futex unlock IP range
futex: Add support for unlocking robust futexes
futex: Cleanup UAPI defines
x86: Select ARCH_MEMORY_ORDER_TSO
uaccess: Provide unsafe_atomic_store_release_user()
futex: Provide UABI defines for robust list entry modifiers
futex: Move futex related mm_struct data into a struct
futex: Make futex_mm_init() void
...
|
||
|
Jiri Olsa
|
26330a9226 |
bpf: Add support to specify uprobe_multi target via file descriptor
Allow uprobe_multi link to identify the target binary by an already opened file descriptor. Adding new BPF_F_UPROBE_MULTI_PATH_FD flag and the path_fd field for the attr.link_create.uprobe_multi struct. When the flag is set, we resolve the target from path_fd, without the flag, we keep the existing string path behavior. I don't see a use case for supporting O_PATH file descriptors, because we need to read the binary first to get probes offsets, so I'm using the CLASS(fd, f), which fails for O_PATH fds. Assisted-by: Codex:GPT-5.4 Signed-off-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20260611114230.950379-4-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Linus Torvalds
|
7e0e7bd60d |
vfs-7.2-rc1.misc
Please consider pulling these changes from the signed vfs-7.2-rc1.misc tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaiwLKgAKCRCRxhvAZXjc
ou/zAP9SOUE6n58i0BdhLYw0RA9Ge5tz42e4inSFi4tkgfCrDwEAlxbRHDcMyhWB
dHmx8OW6b5riMrW+lGPMH58RMoTkdQ4=
=3vuc
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.2-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Features:
- Reduce pipe->mutex contention by pre-allocating pages outside the
lock in anon_pipe_write().
anon_pipe_write() called alloc_page() once per page while holding
pipe->mutex. The allocation can sleep doing direct reclaim and runs
memcg charging, which extends the critical section and stalls any
concurrent reader on the same mutex. Now up to 8 pages are
pre-allocated before the mutex is taken, leftovers are recycled
into the per-pipe tmp_page[] cache before unlock, and any remainder
is released after unlock, keeping the allocator out of the critical
section on both sides. On a writers x readers sweep with 64KB
writes against a 1 MB pipe throughput improves 6-28% and average
write latency drops 5-22%; under memory pressure - when the cost of
holding the mutex across reclaim is highest - throughput improves
21-48% and latency drops 17-33%. The microbenchmark is added to
selftests.
- uaccess/sockptr: fix the ignored_trailing logic in
copy_struct_to_user() to behave as documented and the usize check
in copy_struct_from_sockptr() for user pointers, and add
copy_struct_{from,to}_bounce_buffer() and copy_struct_to_sockptr()
helpers for upcoming users (IPPROTO_SMBDIRECT, IPPROTO_QUIC).
- bpf: add a sleepable bpf_real_inode() kfunc that resolves the real
inode backing a dentry via d_real_inode(). On overlayfs the inode
attached to the dentry doesn't carry the underlying device
information; this is used by the filesystem restriction BPF program
that was merged into systemd.
- docs: add guidelines for submitting new filesystems, motivated by
the maintenance burden abandoned and untestable filesystems impose
on VFS developers, blocking infrastructure work like folio
conversions and iomap migration.
Fixes:
- libfs: set SB_I_NOEXEC and SB_I_NODEV by default in init_pseudo()
and drop the now-redundant assignments in callers. This began as a
one-line dma-buf fix for a path_noexec() warning; a pseudo
filesystem has no reason not to set SB_I_NOEXEC. All init_pseudo()
callers were audited: the only visible effect is on dma-buf where
SB_I_NOEXEC silences the warning.
- Handle set_blocksize() failures in legacy filesystems (bfs, hpfs,
qnx4, jfs, befs, affs, isofs, minix, ntfs3, omfs). Mounting a
device with a sector size > PAGE_SIZE crashed roughly half of them;
the rest had the same missing error handling pattern. Plus a
follow-up releasing the superblock buffer_head when setting the
minix v3 block size fails.
- mount: honour SB_NOUSER in the new mount API.
- fs/fcntl: fix a SOFTIRQ-unsafe lock order in fasync signaling by
switching the process-group paths of send_sigio() and send_sigurg()
from read_lock(&tasklist_lock) to RCU, matching the single-PID
path.
- vfs: add an FS_USERNS_DELEGATABLE flag and set it for NFS, fixing
delegated NFS mounts (fsopen() in a container with the mount
performed by a privileged daemon) that broke when non-init
s_user_ns was tied to FS_USERNS_MOUNT.
- selftests/namespaces: fix a hang in nsid_test where an unreaped
grandchild kept the TAP pipe write-end open, a waitpid(-1) race in
listns_efault_test, and a false FAIL on kernels without listns()
where the tests should SKIP.
- filelock: fix the break_lease() stub signature for
CONFIG_FILE_LOCKING=n.
- init/initramfs_test: wait for the async initramfs unpacking before
running; the test and do_populate_rootfs() share the parser state.
- fs/coredump: reduce redundant log noise in
validate_coredump_safety().
- iomap: pass the correct length to fserror_report_io() in
__iomap_write_begin().
- backing-file: fix the backing_file_open() kerneldoc.
Cleanups:
- initramfs: refactor the cpio hex header parsing to use hex2bin()
instead of the hand-rolled simple_strntoul() which is reverted, and
extend the initramfs KUnit tests to cover header fields with 0x
prefixes.
- Replace __get_free_pages() and friends with kmalloc()/kzalloc()
across quota, proc, ocfs2/dlm, nilfs2, nfs, nfsd, libfs, jfs, jbd2,
isofs, fuse, select, namespace, configfs, binfmt_misc, bfs, and the
do_mounts init code - part of the larger work of replacing page
allocator calls with kmalloc().
- Use clear_and_wake_up_bit() in unlock_buffer() and
journal_end_buffer_io_sync() instead of open-coding the sequence.
- Drop unused VFS exports: unexport drop_super_exclusive(), remove
start_removing_user_path_at(), and fold __start_removing_path()
into start_removing_path().
- fs/read_write: narrow the __kernel_write() export with
EXPORT_SYMBOL_FOR_MODULES().
- vfs: uapi: retire octal and hex constants in favor of (1 << n) for
the O_ flags. Finding a free bit for a new flag across the
architectures was needlessly hard with the mixed bases.
- dcache: add extra sanity checks of dead dentries in dentry_free()
via a new DENTRY_WARN_ONCE() that also prints d_flags.
- iov_iter: use kmemdup_array() in dup_iter() to harden the
allocation against multiplication overflow.
- fs/pipe: write to ->poll_usage only once.
- vfs: remove an always-taken if-branch in find_next_fd().
- dcache: use kmalloc_flex() for struct external_name in __d_alloc().
- namei: use QSTR() instead of QSTR_INIT() in path_pts().
- sync_file_range: delete dead S_ISLNK code.
- Comment fixes: retire a stale comment in fget_task_next() and fix
assorted spelling mistakes"
* tag 'vfs-7.2-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (73 commits)
backing-file: fix backing_file_open() kerneldoc parameter
iomap: pass the correct len to fserror_report_io in __iomap_write_begin
vfs: add FS_USERNS_DELEGATABLE flag and set it for NFS
filelock: fix break_lease() stub signature for CONFIG_FILE_LOCKING=n
vfs: uapi: retire octal and hex numbers in favor of (1 << n) for O_ flags
bpf: add bpf_real_inode() kfunc
fs/read_write: Do not export __kernel_write() to the entire world
libfs: drop redundant SB_I_NOEXEC/SB_I_NODEV in init_pseudo() callers
libfs: set SB_I_NOEXEC and SB_I_NODEV by default in init_pseudo()
mount: honour SB_NOUSER in the new mount API
fs/fcntl: fix SOFTIRQ-unsafe lock order in fasync signaling
selftests/pipe: add pipe_bench microbenchmark
fs/pipe: pre-allocate pages outside pipe->mutex in anon_pipe_write
fs: retire stale comment in fget_task_next()
fs: fix spelling mistakes in comment
bfs: replace get_zeroed_page() with kzalloc()
binfmt_misc: replace __get_free_page() with kmalloc()
configfs: replace __get_free_pages() with kzalloc()
fs/namespace: use __getname() to allocate mntpath buffer
fs/select: replace __get_free_page() with kmalloc()
...
|
||
|
Linus Torvalds
|
50b900c564 |
vfs-7.2-rc1.openat2
Please consider pulling these changes from the signed vfs-7.2-rc1.openat2 tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaiwLKgAKCRCRxhvAZXjc
ogT3AQCKd2J6Qz6vsVaHK8Bo9oE06Px4v2NGeu+FgCV0QQMpJQD+KTEnVl4ZepJu
JsEw202uWeQw9Aj/SoD1oyuYO0ZIrQw=
=rQxh
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.2-rc1.openat2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull openat2 updates from Christian Brauner:
"Features:
- Add O_EMPTYPATH to openat(2)/openat2(2). To get an operable file
descriptor from an O_PATH file descriptor it is possible to use
openat(fd, ".", O_DIRECTORY) for directories, but other file types
require going through open("/proc/<pid>/fd/<nr>") and thus depend
on a functioning procfs.
With O_EMPTYPATH an empty path string is accepted and LOOKUP_EMPTY
is set at path resolution time, allowing to reopen the file behind
the file descriptor directly. Selftests are included.
- Add an OPENAT2_REGULAR flag for openat2(2) which refuses to open
anything but regular files with the new EFTYPE error code.
This implements the "ability to only open regular files" feature
requested by userspace via uapi-group.org and protects services
from being redirected to fifos, device nodes, and friends.
All atomic_open implementations were audited for OPENAT2_REGULAR
handling. Explicit checks were added to ceph, gfs2, nfs (v4), and
cifs/smb - these are the filesystems whose atomic_open can
encounter an existing non-regular file and would otherwise call
finish_open() on it or return a misleading error code.
The remaining implementations (9p, fuse, vboxsf, nfs v2/v3) only
call finish_open() on freshly created files and use
finish_no_open() for lookup hits, letting the VFS catch non-regular
files via the do_open() safety net.
Cleanups:
- Migrate the openat2 selftests to the kselftest harness and move
them under selftests/filesystems/. The tests were written in the
early days of selftests' TAP support and the modern kselftest
harness is much easier to follow and maintain. The contents of the
tests are unchanged and the new emptypath tests are ported on top.
- Make the LAST_XXX last-type constants private to fs/namei.c. The
only user outside of fs/namei.c was ksmbd which only needs to know
whether the last component is a regular one, so
vfs_path_parent_lookup() now performs the LAST_NORM check
internally. The ints are replaced with a dedicated enum last_type"
* tag 'vfs-7.2-rc1.openat2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
vfs: replace ints with enum last_type for LAST_XXX
vfs: make LAST_XXX private to fs/namei.c
selftests: openat2: port emptypath_test to kselftest harness
kselftest/openat2: test for OPENAT2_REGULAR flag
openat2: new OPENAT2_REGULAR flag support
openat2: introduce EFTYPE error code
selftest: add tests for O_EMPTYPATH
vfs: add O_EMPTYPATH to openat(2)/openat2(2)
selftests: openat2: migrate to kselftest harness
selftests: openat2: switch from custom ARRAY_LEN to ARRAY_SIZE
selftests: openat2: move helpers to header
selftests: move openat2 tests to selftests/filesystems/
|
||
|
Linus Torvalds
|
5d15ab717d |
vfs-7.2-rc1.casefold
Please consider pulling these changes from the signed vfs-7.2-rc1.casefold tag. Thanks! Christian -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaiwLKgAKCRCRxhvAZXjc omRSAP4valdmpvuSFbc84F6nn0LjDhTR+zg3uX2iGF6sWaQLjAEAyAhuDH23SQyz SSj2KCh/G2c/IXCVM5j0zn7fZxeKBA4= =GA7C -----END PGP SIGNATURE----- Merge tag 'vfs-7.2-rc1.casefold' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs casefolding updates from Christian Brauner: "This exposes the case folding behavior of local filesystems so that file servers - nfsd, ksmbd, and user space file servers - can report the actual behavior to clients instead of guessing. Filesystems report case-insensitive and case-nonpreserving behavior via new file_kattr flags in their fileattr_get implementations. fat, exfat, ntfs3, hfs, hfsplus, xfs, cifs, nfs, vboxsf, and isofs are wired up. Local filesystems that are not explicitly handled default to the usual POSIX behavior of case-sensitive and case-preserving. nfsd uses this to report case folding via NFSv3 PATHCONF and to implement the NFSv4 FATTR4_CASE_INSENSITIVE and FATTR4_CASE_PRESERVING attributes - both have been part of the NFS protocols for decades to support clients on non-POSIX systems - and ksmbd reports it via FS_ATTRIBUTE_INFORMATION. Exposing the information through the fileattr uapi covers user space file servers. The immediate motivation is interoperability: Windows NFS clients hard-require servers to report case-insensitivity for Win32 applications to work correctly, and a client that knows the server is case-insensitive can avoid issuing multiple LOOKUP/READDIR requests searching for case variants. The Linux NFS client already grew support for case-insensitive shares years ago in support of the Hammerspace NFS server - negative dentry caching must be disabled (a lookup for "FILE.TXT" failing must not cache a negative entry when "file.txt" exists) and directory change invalidation must drop cached case-folded name variants. Such servers often operate in multi-protocol environments where a single file service instance caters to both NFS and SMB clients, and nfsd needs to report case folding properly to participate as a first-class citizen there. A follow-up series brings fixes for the initial work: the nfsd case-info probe now uses kernel credentials, maps -ESTALE to NFS3ERR_STALE, and has its cost capped across READDIR entries; the nfs client avoids transiently zeroed case capability bits during the probe and skips the pathconf probe when neither field is consumed; the FS_CASEFOLD_FL semantics are clarified in the UAPI header; and the tools UAPI headers are synced" * tag 'vfs-7.2-rc1.casefold' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (22 commits) nfsd: Cap case-folding probe cost across READDIR entries nfsd: Map -ESTALE from case probe to NFS3ERR_STALE nfsd: Use kernel credentials for case-info probe fs: Clarify FS_CASEFOLD_FL semantics in UAPI header nfs: Skip pathconf probe when neither field is consumed nfs: Avoid transient zeroed case capability bits during probe tools headers UAPI: Sync case-sensitivity flags from linux/fs.h ksmbd: Report filesystem case sensitivity via FS_ATTRIBUTE_INFORMATION nfsd: Implement NFSv4 FATTR4_CASE_INSENSITIVE and FATTR4_CASE_PRESERVING nfsd: Report export case-folding via NFSv3 PATHCONF isofs: Implement fileattr_get for case sensitivity vboxsf: Implement fileattr_get for case sensitivity nfs: Implement fileattr_get for case sensitivity cifs: Implement fileattr_get for case sensitivity xfs: Report case sensitivity in fileattr_get hfsplus: Report case sensitivity in fileattr_get hfs: Implement fileattr_get for case sensitivity ntfs3: Implement fileattr_get for case sensitivity exfat: Implement fileattr_get for case sensitivity fat: Implement fileattr_get for case sensitivity ... |
||
|
Tingmao Wang
|
29752205db
|
landlock: Add API support and docs for the quiet flags
Adds the UAPI for the quiet flags feature (but not the implementation yet). Even though currently LANDLOCK_ADD_RULE_QUIET only affects audit logging, in the future this can also be used as part of a supervisor mechanism, where it will also suppress denial notifications on a per-object basis. Thus the name is deliberately generic, as opposed to e.g. LANDLOCK_ADD_RULE_LOG_QUIET. According to pahole, even after adding the struct access_masks quiet_masks in struct landlock_hierarchy, the u32 log_* bitfield still only has a size of 2 bytes, so there's minimal wasted space. Assisted-by: GitHub-Copilot:claude-opus-4.8 Signed-off-by: Tingmao Wang <m@maowtm.org> [mic: Update date, fix comment formatting] Link: https://patch.msgid.link/031184748a8e74c0bb02f1fa13d7a3f10918c627.1781228815.git.m@maowtm.org Signed-off-by: Mickaël Salaün <mic@digikod.net> |
||
|
Saeed Mahameed
|
eb7b4d458e |
devlink: Implement devlink param multi attribute nested data values
Devlink param value attribute is not defined since devlink is handling the value validating and parsing internally, this allows us to implement multi attribute values without breaking any policies. Devlink param multi-attribute values are considered to be dynamically sized arrays of u64 values, by introducing a new devlink param type DEVLINK_PARAM_TYPE_U64_ARRAY, driver and user space can set a variable count of u64 values into the DEVLINK_ATTR_PARAM_VALUE_DATA attribute. Implement get/set parsing and add to the internal value structure passed to drivers. This is useful for devices that need to configure a list of values for a specific configuration. example: $ devlink dev param show pci/... name multi-value-param name multi-value-param type driver-specific values: cmode permanent value: 0,1,2,3,4,5,6,7 $ devlink dev param set pci/... name multi-value-param \ value 4,5,6,7,0,1,2,3 cmode permanent Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Link: https://patch.msgid.link/20260609040453.711932-5-rkannoth@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Matthieu Buffet
|
e61247a2e6
|
landlock: Add UDP send+connect access control
Add support for a second fine-grained UDP access right. LANDLOCK_ACCESS_NET_CONNECT_SEND_UDP controls the ability to set the remote port of a socket (via connect()) and to specify an explicit destination when sending a datagram, to override any remote peer set on a UDP socket (e.g. in sendto() or sendmsg()). It will be useful for applications that send datagrams, and for some servers too (those creating per-client sockets, which want to receive traffic only from a specific address). Similarly as for bind(), this access control is performed when configuring sockets, not in hot code paths. Add detection of when autobind is about to be required, and deny the operation if the process would not be allowed to call bind(0) explicitly. Autobind can only be performed in udp_lib_get_port() from code paths already controlled by LSM hooks: when connect()ing, sending a first datagram, and in some splice() EOF edge case which, afaiu, can only happen after a remote peer has been set. This invariant needs to be preserved to keep bind policies actually enforced. Signed-off-by: Matthieu Buffet <matthieu@buffet.re> Link: https://patch.msgid.link/20260611162107.49278-3-matthieu@buffet.re [mic: Add quick return for non-sandboxed tasks, fix sa_family dereferencing, fix comment formatting] Signed-off-by: Mickaël Salaün <mic@digikod.net> |
||
|
Matthieu Buffet
|
9a8ed15ce2
|
landlock: Add UDP bind() access control
Add support for a first fine-grained UDP access right. LANDLOCK_ACCESS_NET_BIND_UDP controls the ability to set the local port of a UDP socket (via bind()). It will be useful for servers (to start receiving datagrams), and for some clients that need to use a specific source port (e.g. mDNS requires to use port 5353) For obvious performance concerns, access control is only enforced when configuring sockets, not when using them for common send/recv operations. Bump ABI to allow userspace to detect and use this new right. Signed-off-by: Matthieu Buffet <matthieu@buffet.re> Link: https://patch.msgid.link/20260611162107.49278-2-matthieu@buffet.re [mic: Fix comment formatting] Signed-off-by: Mickaël Salaün <mic@digikod.net> |
||
|
Grzegorz Nitka
|
9375487c0c |
dpll: add generic DPLL type
Add DPLL_TYPE_GENERIC to represent DPLL devices which do not fit the existing PPS or EEC classes. The UAPI type is intentionally generic. During netdev discussion, maintainers pointed out that introducing identifiers tied to a specific placement or single design does not scale across ASICs and vendors. The role of a DPLL is already inferable from the spawning driver, bus device, and pin topology, without encoding additional purpose-specific taxonomy in the type name. Using a generic type keeps the UAPI extensible and avoids premature naming that may become incorrect as new hardware topologies are exposed through the DPLL subsystem. Expose the new type through UAPI and netlink specification as "generic". Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Link: https://patch.msgid.link/20260607183045.1213735-2-grzegorz.nitka@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
431662b642 |
ipsec-next-2026-06-12
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEH7ZpcWbFyOOp6OJbrB3Eaf9PW7cFAmortdsACgkQrB3Eaf9P W7eC8g/+JjaC75xnVJUZLnVqeyasXYs9HcAppT4IUPVKFm0iEitjE7smbUf1Zapp 1dyjVIAp1eqahJ8wY3u5OOq16UTkg38bEUXtlm5Txyr8EUOALtWE5DIHhT/LYns8 rDfVht9V+OuzjddYRwpQY/HYPC4WlxT1WOVDoKhJDDDiAph0JyyRLDlanp59Cmdh lxOHQ0ogh76SbUyaslWSYqBdaNq84DaV2fwNxpll27/b2Qix064Q+ZM4IrpulI8b H8Fb5u+R/3hGO+/TJPbOeRl6exw7aeU03+Gu9h6UFpQTlP9uzas8g/7xxlmJr7wq LcAz5JyMKapdSfoxI6Z2lXM0AtyM+B4iqHoQRKplF4QRjzCsHnmw0SSbv/nXwzrU 6/qHHRqtioKNGg99ptChBT36L0bLV78WE6TdLHW/fxGxLIoJWGgyltAZ9/TNH/es dcPEuecYl0vxz2kspXCiRQGTGI8gDPaTaOiiNvQfhOb9rT+767oqeUvxuW7WRAW+ STSShHZqDYVTNtHR7dl0X1BtEqHLryyHMi4gsB+NpOP+snZaUmRpTTVdYdl/GRK1 WAgYkgFsGThwR4fZUtDHOAt5VVyonvA//q+yYzgzi8RtpFxsGDQsANneD8m7tQL0 iTmx0vBR+AVgaiHdhsVN/rQDLdMbv+W3n03Kx1kk3+I4udTkVuE= =bils -----END PGP SIGNATURE----- Merge tag 'ipsec-next-2026-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2026-06-12 1) Replace the open-coded manual cleanup in xfrm_add_policy() error path with xfrm_policy_destroy() for consistency with xfrm_policy_construct(). From Deepanshu Kartikey. 2) Limit XFRMA_TFCPAD to a sensible maximum (max IP length, 64k) since u32 is excessive for traffic flow confidentiality padding. From David Ahern. 3) Add a new netlink message XFRM_MSG_MIGRATE_STATE that allows migrating individual IPsec SAs independently of their policies. The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA migration, lacks SPI for unique SA identification, and cannot express reqid changes or migrate Transport mode selectors. The new interface identifies the SA via SPI and mark, supports reqid changes, address family changes, encap removal, and uses an atomic create+install flow under x->lock to prevent SN/IV reuse during AEAD SA migration. From Antony Antony. * tag 'ipsec-next-2026-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next: xfrm: add documentation for XFRM_MSG_MIGRATE_STATE xfrm: restrict netlink attributes for XFRM_MSG_MIGRATE_STATE xfrm: add XFRM_MSG_MIGRATE_STATE for single SA migration xfrm: make xfrm_dev_state_add xuo parameter const xfrm: extract address family and selector validation helpers xfrm: refactor XFRMA_MTIMER_THRESH validation into a helper xfrm: move encap and xuo into struct xfrm_migrate xfrm: add error messages to state migration xfrm: add state synchronization after migration xfrm: check family before comparing addresses in migrate xfrm: split xfrm_state_migrate into create and install functions xfrm: rename reqid in xfrm_migrate xfrm: fix NAT-related field inheritance in SA migration xfrm: allow migration from UDP encapsulated to non-encapsulated ESP xfrm: add extack to xfrm_init_state xfrm: remove redundant assignments xfrm: Reject excessive values for XFRMA_TFCPAD xfrm: cleanup error path in xfrm_add_policy() ==================== Link: https://patch.msgid.link/20260612074725.1760473-1-steffen.klassert@secunet.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Wei Wang
|
06c2dce2d0 |
psp: add new netlink cmd for dev-assoc and dev-disassoc
The main purpose of this cmd is to be able to associate a non-psp-capable device (e.g. veth or netkit) with a psp device. One use case is if we create a pair of veth/netkit, and assign 1 end inside a netns, while leaving the other end within the default netns, with a real PSP device, e.g. netdevsim or a physical PSP-capable NIC. With this command, we could associate the veth/netkit inside the netns with PSP device, so the virtual device could act as PSP-capable device to initiate PSP connections, and performs PSP encryption/decryption on the real PSP device. Signed-off-by: Wei Wang <weibunny@fb.com> Reviewed-by: Daniel Zahka <daniel.zahka@gmail.com> Link: https://patch.msgid.link/20260608233118.2694144-3-weibunny.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Sabrina Dubroca
|
cdae65fc43 |
tls: remove tls_toe and the related driver
The tls_toe feature and its single user (chelsio chtls) have been unmaintained for multiple years. It also hooks into the core of the TCP implementation, and bypasses most of the networking stack. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/1f30e73275c07bf879f547589872d0916025a52e.1781165969.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Alex Mastro
|
298ab7e6f1 |
iommufd: Clarify IOAS_MAP_FILE dma-buf support
IOMMU_IOAS_MAP_FILE is documented as mapping a memfd, but the
implementation first tries to resolve the fd as a dma-buf and has a
special path for supported dma-buf exporters. In particular, VFIO PCI
dma-bufs exported through VFIO_DEVICE_FEATURE_DMA_BUF can be mapped when
they describe a single DMA range.
Update the UAPI comment so userspace understands that certain kinds of
dma-buf are supported in addition to memfd.
Fixes:
|
||
|
Joerg Roedel
|
dd8a3c6cd5 | Merge branches 'apple/dart', 'arm/smmu/updates', 'arm/smmu/bindings', 'rockchip', 'verisilicon', 'riscv', 'intel/vt-d', 'amd/amd-vi' and 'core' into next | ||
|
Fidelio Lawson
|
13655144dd |
net: ethtool: add KSZ87xx low-loss cable PHY tunables
Introduce vendor-specific PHY tunable identifiers to control the KSZ87xx low-loss cable erratum handling through the ethtool PHY tunable interface. The following tunables are added: - a boolean "short-cable" tunable, applying a documented and conservative preset intended for short or low-loss Ethernet cables; - an integer LPF bandwidth tunable, allowing advanced adjustment of the receiver low-pass filter bandwidth; - an integer DSP EQ initial value tunable, allowing advanced tuning of the PHY equalizer initialization. The actual behavior is implemented by the corresponding PHY and switch drivers. Reviewed-by: Marek Vasut <marex@nabladev.com> Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de> Signed-off-by: Fidelio Lawson <fidelio.lawson@exotec.com> Link: https://patch.msgid.link/20260609-ksz87xx_errata_low_loss_connections-v10-2-9ba4418cf3db@exotec.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Tarun Sahu
|
e98a9c6172 |
liveupdate: Document that retrieve failure is permanent
Signed-off-by: Tarun Sahu <tarunsahu@google.com> Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org> Link: https://patch.msgid.link/faec5df2a3e90240cde5897bae2250cd7d44aeac.1781170056.git.tarunsahu@google.com Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> |
||
|
Louis Scalbert
|
32b0b89533 |
bonding: 3ad: add lacp_strict configuration knob
When an 802.3ad (LACP) bonding interface has no slaves in the
collecting/distributing state, the bonding master still reports
carrier as up as long as at least 'min_links' slaves have carrier.
In this situation, only one slave is effectively used for TX/RX,
while traffic received on other slaves is dropped. Upper-layer
daemons therefore consider the interface operational, even though
traffic may be blackholed if the lack of LACP negotiation means
the partner is not ready to deal with traffic.
Introduce a configuration knob to control this behavior. It allows
the bonding master to assert carrier only when at least 'min_links'
slaves are in Collecting_Distributing state.
The default mode preserves the existing behavior. This patch only
introduces the knob; its behavior is implemented in the subsequent
commit.
Fixes:
|
||
|
Nathan Chancellor
|
8cb2c9285e |
can: virtio: Fix comment in UAPI header
When compile testing the UAPI headers with clang, there is an warning turned
error for using a C++ style ('//') comment, which is explicitly forbidden for
UAPI headers.
In file included from <built-in>:1:
./usr/include/linux/virtio_can.h:29:35: error: // comments are not allowed in this language [-Werror,-Wcomment]
29 | #define VIRTIO_CAN_MAX_DLEN 64 // this is like CANFD_MAX_DLEN
| ^
1 error generated.
Switch to a standard C style comment.
Fixes: 2b6b4bb7d96f ("can: virtio: Add virtio CAN driver")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260604-virtio_can-fix-uapi-comment-v1-1-199fa96ec5f0@kernel.org>
|
||
|
Matias Ezequiel Vara Larsen
|
083082a4e6 |
can: virtio: Add virtio CAN driver
Add virtio CAN driver based on Virtio 1.4 specification (see https://github.com/oasis-tcs/virtio-spec/tree/virtio-1.4). The driver implements a complete CAN bus interface over Virtio transport, supporting both CAN Classic and CAN-FD Ids. In term of frames, it supports classic and CAN FD. RTR frames are only supported with classic CAN. Usage: - "ip link set up can0" - start controller - "ip link set down can0" - stop controller - "candump can0" - receive frames - "cansend can0 123#DEADBEEF" - send frames Signed-off-by: Harald Mommer <harald.mommer@oss.qualcomm.com> Co-developed-by: Harald Mommer <harald.mommer@oss.qualcomm.com> Signed-off-by: Mikhail Golubev-Ciuchea <mikhail.golubev-ciuchea@oss.qualcomm.com> Co-developed-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Damir Shaikhutdinov <Damir.Shaikhutdinov@opensynergy.com> Reviewed-by: Francesco Valla <francesco@valla.it> Tested-by: Francesco Valla <francesco@valla.it> Signed-off-by: Matias Ezequiel Vara Larsen <mvaralar@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-ID: <ahXNb+KzuHYbS24+@fedora> |
||
|
Ethan Carter Edwards
|
02687282c7 |
virtio_console: Fix spelling mistake "colums" -> "columns"
There is a spelling mistake in a struct description. Fix it. Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-ID: <20260418-virtio-typo-v1-1-0df6f943a79d@ethancedwards.com> |
||
|
Chuck Lever
|
2eac189bb0 |
NFSD: Add NFSD_CMD_UNLOCK_EXPORT netlink command
When a filesystem is exported to NFS clients, NFSv4 state (opens, locks, delegations, layouts) holds references that prevent the underlying filesystem from being unmounted. NFSD_CMD_UNLOCK_FILESYSTEM addresses this at superblock granularity, but administrators unexporting a single path on a shared filesystem (e.g., one of several exports on the same device) need finer control. Add NFSD_CMD_UNLOCK_EXPORT, which revokes NFSv4 state acquired through exports of a specific path. Matching is by path identity (dentry + vfsmount) via the sc_export field on each nfs4_stid, so multiple svc_export objects for the same path -- one per auth_domain -- are handled correctly without requiring the caller to name a specific client. The command takes a single "path" attribute. Userspace (exportfs -u) sends this after removing the last client for a given path, enabling the underlying filesystem to be unmounted. When multiple clients share an export path, individual unexports do not trigger state revocation; only the final one does. Reviewed-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dai Ngo <dai.ngo@oracle.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Chuck Lever
|
327c5168ef |
NFSD: Add NFSD_CMD_UNLOCK_FILESYSTEM netlink command
Add NFSD_CMD_UNLOCK_FILESYSTEM as a dedicated netlink command for revoking NFS state under a filesystem path, providing a netlink equivalent of /proc/fs/nfsd/unlock_fs. The command requires a "path" string attribute containing the filesystem path whose state should be released. The handler resolves the path to its superblock, then cancels async copies, releases NLM locks, and revokes NFSv4 state on that superblock. Reviewed-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dai Ngo <dai.ngo@oracle.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Chuck Lever
|
978cda83de |
NFSD: Add NFSD_CMD_UNLOCK_IP netlink command
The existing write_unlock_ip procfs interface releases NLM file locks held by a specific client IP address, but procfs provides no structured way to extend that operation to other scopes such as revoking NFSv4 state. Add NFSD_CMD_UNLOCK_IP as a dedicated netlink command for releasing NLM locks by client address. The command accepts a binary sockaddr_in or sockaddr_in6 in its address attribute. The handler validates the address family and length, then calls nlmsvc_unlock_all_by_ip() to release matching NLM locks. Because lockd is a single global instance, that call operates across all network namespaces regardless of which namespace the caller inhabits. A separate netlink command for filesystem-scoped unlock is added in a subsequent commit. The nfsd_ctl_unlock_ip tracepoint is updated from string-based address logging to __sockaddr, which stores the binary sockaddr and formats it with %pISpc. This affects both the new netlink path and the existing procfs write_unlock_ip path, giving consistent structured output in both cases. Reviewed-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dai Ngo <dai.ngo@oracle.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Claudio Imbrenda
|
103ff3a50e |
KVM: s390: Add capability to support 2G hugepages
Add KVM_CAP_S390_HPAGE_2G to signal to userspace that 2G hugepages may be used to back the guest; restrictions apply similar to 1M hugepages. Enable the (for now still ignored) GMAP_FLAG_ALLOW_HPAGE_2G flag for the guest gmap, and propagate / disable it as necessary. Reviewed-by: Steffen Eiden <seiden@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-ID: <20260609150930.665370-3-imbrenda@linux.ibm.com> |
||
|
David 'equinox' Lamparter
|
69710a37ba |
if_ether.h: add 802.1AC, warn about GRE 0x00FE
Because LLC wasn't complicated/annoying enough, there's 2 more "ethertypes" being used for it: - 0x8870 is pretty "normal", it got standardized in 802.1AC-2016/Cor1-2018 for transporting LLC frames > 1500 bytes. It simply replaces the length value (which is no longer encoded, and must now be derived from the packet.) The actual value dates back to 2001; https://datatracker.ietf.org/doc/html/draft-ietf-isis-ext-eth-01 (it was used without "proper" standardization for a long time) - 0x00fe is a doozy - actually "invalid" depending on how you look at it; it's used in GRE (and possibly GENEVE) tunnels to transport the IS-IS routing protocol. https://seclists.org/tcpdump/2002/q4/61 is the best/oldest source I could find. It's inspired by the 0xfe SAP value, a GRE packet with protocol 0x00fe is followed by a payload "as if" it was Ethernet with "<length> 0xfe 0xfe 0x03". (Again the length isn't encoded explicitly anymore.) The 0x00fe value is quite close to other values the kernel is using internally for various things (after all they "won't clash for 1500 types"). Except this one does clash, and if someone unknowingly starts using it for something internal... we end up in a world of pain in getting IS-IS running on GRE tunnels. Hence the "WARNING". Signed-off-by: David 'equinox' Lamparter <equinox@diac24.net> Cc: Andrew Lunn <andrew+netdev@lunn.ch> Link: https://patch.msgid.link/20260605164144.81184-1-equinox@diac24.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
4ed4f607e1 |
This cleanup patchset includes the following patches, all by
Sven Eckelmann: - tp_meter: initialize last_recv_time during init - convert cancellation of work items to disable helper - clean up wifi detection cache (3 patches) - clean up kernel-doc: corrections, reword, typos (6 patches) -----BEGIN PGP SIGNATURE----- iQJKBAABCgA0FiEE1ilQI7G+y+fdhnrfoSvjmEKSnqEFAmoieDIWHHN3QHNpbW9u d3VuZGVybGljaC5kZQAKCRChK+OYQpKeoYaPD/9Y9C1G27NG7w8vpY/Z8AhSXp1W YRclcBwpjxCdFbLV6FvoKRaf97GxpkJUoYEzyFZgcfVhw3+KjlGTrj3yeKAPKB1W 5HrFUGSIusKUBl92dUJjcIQaIQO9oSnoI+wg4lZIOB8+6/3bZbQe9TKdINIp9g4q /wVXVMbFHw9PRh5WQ2TRTlOskWiMZbctSYkUlDWNx+lNkxABxUxxYf/mXfM3Bw8r HOfiqBf5h5KPHeO4hil3uwnvprXI/wZUeW7BGqwJu5o7VYru6lZfuX0bD4nlLD+9 M4F0gosPVbuRkgjyWtwbtZdnF800m10hxdySJn11VKzcviz9UWdmTnc619MLM6cF SkXtV7jh+gRCKEZr4ulTn7XRw3vU5AjN7/YHxkXgOpfxNonYCY7rbcQVbXdpdWxd u9ltY4vljzfQ7Wvwh1VBz4Y05plHdi6IcRb+9TezlSflNXQjSGZL3vbj+d0AOUEw 2cpwVcWM8QKhBMFK4kO9evFZEi2wOCxNLlD71RMwcHMaI91ZoIGKC5oLGNtpDTkV emH8HP59a6Dc3A4Ptmzl6Fc8iczHlLExf5BEeN9+4XgHRLi/KQDbine44Rp0Txek XC1bUSTI75H4hgrAQUX3Ly3tdzZPXFy6lWpIn/qYP/HvAR5X+xaouByUCDVHSqd2 TiWsWaMG4d4fdtrA7Q== =7tLs -----END PGP SIGNATURE----- Merge tag 'batadv-next-pullrequest-20260605' of https://git.open-mesh.org/batadv Simon Wunderlich says: ==================== This cleanup patchset includes the following patches, all by Sven Eckelmann: - tp_meter: initialize last_recv_time during init - convert cancellation of work items to disable helper - clean up wifi detection cache (3 patches) - clean up kernel-doc: corrections, reword, typos (6 patches) * tag 'batadv-next-pullrequest-20260605' of https://git.open-mesh.org/batadv: batman-adv: fix kernel-doc typos and grammar errors batman-adv: fix batadv_v_ogm_packet_recv error handling kernel-doc batman-adv: uapi: keep kernel-doc in struct member order batman-adv: bla: update stale kernel-doc batman-adv: tp_meter: update stale kernel-doc after refactoring batman-adv: correct batadv_wifi_* kernel-doc batman-adv: document cleanup of batadv_wifi_net_devices entries batman-adv: use GFP_KERNEL allocations for the wifi detection cache batman-adv: drop duplicated wifi_flags assignments batman-adv: convert cancellation of work items to disable helper batman-adv: tp_meter: initialize last_recv_time during init ==================== Link: https://patch.msgid.link/20260605072005.490368-1-sw@simonwunderlich.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Randy Dunlap
|
38ecabc9af |
watchdog: uapi: add comments for what bit masks apply to
Add comments similar to those in include/linux/watchdog.h so that the reader/user doesn't have to dig into the API documentation files for this. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> |
||
|
Mark Harmstone
|
c6153ed23e |
btrfs: add ioctl GET_CSUMS to read raw checksums from file range
Add a new unprivileged BTRFS_IOC_GET_CSUMS ioctl, which can be used to
query the on-disk csums for a file range.
The ioctl is deliberately per-file rather than exposing raw csum tree
lookups, to avoid leaking information to users about files they may not
have access to.
This is done by userspace passing a struct btrfs_ioctl_get_csums_args to
the kernel, which details the offset and length we're interested in, and
a buffer for the kernel to write its results into. The kernel writes a
struct btrfs_ioctl_get_csums_entry into the buffer, followed by the
csums if available. The maximum size of the user buffer is capped to
16MiB.
If the extent is an uncompressed, non-NODATASUM extent, the kernel sets
the entry type to BTRFS_GET_CSUMS_HAS_CSUMS and follows it with the
csums. If it is sparse, preallocated, or beyond the EOF, it sets the
type to BTRFS_GET_CSUMS_ZEROED - this is so userspace knows it can use
the precomputed hash of the zero sector. Otherwise, it sets the type to
BTRFS_GET_CSUMS_NODATASUM, BTRFS_GET_CSUMS_COMPRESSED,
BTRFS_GET_CSUM_ENCRYPTED, or BTRFS_GET_CSUM_INLINE.
For example, a file with a [0, 4K) hole and [4K, 12K) data extent would
produce the following output buffer:
| [0, 4K) ZEROED | [4K, 12K) HAS_CSUMS | csum data |
We do store the csums of compressed extents, but we deliberately don't
return them here: they're calculated over the compressed data, not the
uncompressed data that's returned to userspace. Similarly for encrypted
data, once encryption is supported, in which the csums will be on the
ciphertext.
The main use case for this is for speeding up mkfs.btrfs --rootdir. For
the case when the source FS is btrfs and using the same csum algorithm,
we can avoid having to recalculate the csums - in my synthetic
benchmarks (16GB file on a spinning-rust drive), this resulted in a ~11%
speed-up (218s to 196s).
When using the --reflink option added in btrfs-progs v6.16.1, we can forgo
reading the data entirely, resulting a ~2200% speed-up on the same test
(128s to 6s).
# mkdir rootdir
# dd if=/dev/urandom of=rootdir/file bs=4096 count=4194304
(without ioctl)
# echo 3 > /proc/sys/vm/drop_caches
# time mkfs.btrfs --rootdir rootdir testimg
...
real 3m37.965s
user 0m5.496s
sys 0m6.125s
# echo 3 > /proc/sys/vm/drop_caches
# time mkfs.btrfs --rootdir rootdir --reflink testimg
...
real 2m8.342s
user 0m5.472s
sys 0m1.667s
(with ioctl)
# echo 3 > /proc/sys/vm/drop_caches
# time mkfs.btrfs --rootdir rootdir testimg
...
real 3m15.865s
user 0m4.258s
sys 0m6.261s
# echo 3 > /proc/sys/vm/drop_caches
# time mkfs.btrfs --rootdir rootdir --reflink testimg
...
real 0m5.847s
user 0m2.899s
sys 0m0.097s
Another notable use case is for deduplication, where reading the
checksums may serve as a hint instead of reading the whole file data.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
||
|
Jiri Olsa
|
ba042ed644 |
bpf: Add support for tracing_multi link session
Adding support to use session attachment with tracing_multi link. Adding new BPF_TRACE_FSESSION_MULTI program attach type, that follows the BPF_TRACE_FSESSION behaviour but on the tracing_multi link. Such program is called on entry and exit of the attached function and allows to pass cookie value from entry to exit execution. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20260606123955.345967-16-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Jiri Olsa
|
46b42af27d |
bpf: Add support for tracing_multi link cookies
Add support to specify cookies for tracing_multi link. Cookies are provided in array where each value is paired with provided BTF ID value with the same array index. Such cookie can be retrieved by bpf program with bpf_get_attach_cookie helper call. We need to sort cookies array together with ids array in check_dup_ids, to keep the id->cookie relation. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20260606123955.345967-15-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Jiri Olsa
|
c1d32dea5d |
bpf: Add support for tracing multi link
Adding new link to allow to attach program to multiple function
BTF IDs. The link is represented by struct bpf_tracing_multi_link.
To configure the link, new fields are added to bpf_attr::link_create
to pass array of BTF IDs;
struct {
__aligned_u64 ids;
__u32 cnt;
} tracing_multi;
Each BTF ID represents function (BTF_KIND_FUNC) that the link will
attach bpf program to.
We use previously added bpf_trampoline_multi_attach/detach functions
to attach/detach the link.
The linkinfo/fdinfo callbacks will be implemented in following changes.
Note this is supported only for archs (x86_64) with ftrace direct and
have single ops support.
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS &&
CONFIG_HAVE_SINGLE_FTRACE_DIRECT_OPS
Note using sort_r (instead of plain sort) in check_dup_ids, because we
will use the swap callback in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260606123955.345967-14-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Jiri Olsa
|
d14e6b4346 |
bpf: Add multi tracing attach types
Adding new program attach types multi tracing attachment: BPF_TRACE_FENTRY_MULTI BPF_TRACE_FEXIT_MULTI and their base support in verifier code. Programs with such attach type will use specific link attachment interface coming in following changes. This was suggested by Andrii some (long) time ago and turned out to be easier than having special program flag for that. Bpf programs with such types have 'bpf_multi_func' function set as their attach_btf_id and keep module reference when it's specified by attach_prog_fd. They are also accepted as sleepable programs during verification, and the real validation for specific BTF_IDs/functions will happen during the multi link attachment in following changes. Suggested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20260606123955.345967-11-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Jori Koolstra
|
0da79c259a
|
vfs: uapi: retire octal and hex numbers in favor of (1 << n) for O_ flags
A recent build failure[1] exposed the diffculty of working with the
current octal and hex definitions of O_ flags when trying to find a gap
for a new flag. This difficulty is compounded by the fact that O_ flags
may have architectural specific values.
Replace the hex/octal #defines, which are hard to parse when looking for
free bits, with explicit bit shifts like (1 << 11). Also, add comments
that identify which architectures redefine some of the seemingly free
("cursed") bits in uapi/asm-generic/fcntl.h. These should not be used to
define new O_ flags (for now, at least).
The translastion was done with Claude Opus 4.8, and verified with a
(non-AI) gawk script. The accounting of which architectures claim
which bit-gaps in uapi/asm-generic/fcntl.h is also done by hand.
[1]: https://lore.kernel.org/all/agruPPybCx8q2XcJ@sirena.org.uk/
Assisted-by: Claude:Opus 4.8
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Link: https://patch.msgid.link/20260604222405.5382-1-jkoolstra@xs4all.nl
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
||
|
Leon Hwang
|
786be2b059 |
bpf: Check tail zero of bpf_prog_info
Since there're 4 bytes padding at the end of struct bpf_prog_info, they
won't be checked by bpf_check_uarg_tail_zero().
pahole -C bpf_prog_info ./vmlinux
struct bpf_prog_info {
...
__u32 attach_btf_obj_id; /* 220 4 */
__u32 attach_btf_id; /* 224 4 */
/* size: 232, cachelines: 4, members: 38 */
/* sum members: 224 */
/* sum bitfield members: 1 bits, bit holes: 1, sum bit holes: 31 bits */
/* padding: 4 */
/* forced alignments: 9 */
/* last cacheline: 40 bytes */
} __attribute__((__aligned__(8)));
If a future kernel extension adds a new 4-byte field, older userspace
programs allocating this structure on the stack might inadvertently pass
uninitialized stack garbage into the new field, permanently breaking
backward compatibility. -- sashiko [1]
Fix it by changing sizeof(info) to
offsetofend(struct bpf_prog_info, attach_btf_id).
And, add "__u32 :32" to the tail of struct bpf_prog_info.
[1] https://lore.kernel.org/bpf/20260513224823.6494FC19425@smtp.kernel.org/
Fixes:
|
||
|
Leon Hwang
|
e2a49fdb1b |
bpf: Check tail zero of bpf_map_info
Since there're 4 bytes padding at the end of struct bpf_map_info, they
won't be checked by bpf_check_uarg_tail_zero().
pahole -C bpf_map_info ./vmlinux
struct bpf_map_info {
...
__u64 hash __attribute__((__aligned__(8))); /* 88 8 */
__u32 hash_size; /* 96 4 */
/* size: 104, cachelines: 2, members: 18 */
/* padding: 4 */
/* forced alignments: 1 */
/* last cacheline: 40 bytes */
} __attribute__((__aligned__(8)));
If a future kernel extension adds a new 4-byte field, older userspace
programs allocating this structure on the stack might inadvertently pass
uninitialized stack garbage into the new field, permanently breaking
backward compatibility. -- sashiko [1]
Fix it by changing sizeof(info) to
offsetofend(struct bpf_map_info, hash_size).
And, add "__u32 :32" to the tail of struct bpf_map_info.
[1] https://lore.kernel.org/bpf/20260513224823.6494FC19425@smtp.kernel.org/
Fixes:
|
||
|
Ankit Agrawal
|
682ecb14e8 |
vfio/nvgrace-gpu: Add Blackwell-Next GPU readiness check via CXL DVSEC
Add a CXL DVSEC-based readiness check for Blackwell-Next GPUs alongside the existing legacy BAR0 polling path. The CXL Device DVSEC offset is discovered at probe time. Probe, fault and read/write paths then branch on that to use either the legacy BAR0 polling or the CXL DVSEC polling. The CXL path polls Memory_Active, requiring MEM_INFO_VALID within 1s and MEM_ACTIVE within Memory_Active_Timeout (up to 256s) as per CXL spec r4.0 sec 8.1.3.8.2. Given the long worst-case wait, the CXL poll runs outside memory_lock with only a quick readiness check is done under the lock. The poll loops sleep with schedule_timeout_killable() and return -EINTR on a fatal signal. This avoids hung-task panics during the long uninterruptible wait. Extend this to the legacy based wait as well for improvement. In the fault handler the wait runs locklessly before memory_lock. If a reset races in, the in-lock recheck returns -EAGAIN and the wait is retried rather than returning a spurious VM_FAULT_SIGBUS. Add PCI_DVSEC_CXL_MEM_ACTIVE_TIMEOUT to pci_regs.h for the timeout field. Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Suggested-by: Alex Williamson <alex@shazbot.org> Signed-off-by: Ankit Agrawal <ankita@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20260602063015.3915-1-ankita@nvidia.com Signed-off-by: Alex Williamson <alex@shazbot.org> |
||
|
Mykyta Yatsenko
|
16b4d3e2fb |
bpf: Implement resizable hashmap basic functions
Use rhashtable_lookup_likely() for lookups, rhashtable_remove_fast() for deletes, and rhashtable_lookup_get_insert_fast() for inserts. Updates modify values in place under RCU rather than allocating a new element and swapping the pointer (as regular htab does). This trades read consistency for performance: concurrent readers may see partial updates. BPF_F_LOCK support and special-field handling (timers, kptrs, etc.) follow in a later commit. Initialize rhashtable with bpf_mem_alloc element cache. Require BPF_F_NO_PREALLOC. Limit max_entries to 2^31. Free elements via rhashtable_free_and_destroy(). Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com> Link: https://lore.kernel.org/r/20260605-rhash-v7-4-5b8e05f8630d@meta.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Adrián Larumbe
|
12cf826bf1 |
drm/panthor: Support sparse mappings
Allow UM to bind sparsely populated memory regions by cyclically mapping virtual ranges over a kernel-allocated dummy BO. This alternative is preferable to the old method of handling sparseness in the UMD, because it relied on the creation of a buffer object to the same end, despite the fact Vulkan sparse resources don't need to be backed by a driver BO. The choice of backing sparsely-bound regions with a Panthor BO was made so as to profit from the existing shrinker reclaim code. That way no special treatment must be given to the dummy sparse BOs when reclaiming memory, as would be the case if we had chosen a raw kernel page implementation. A new dummy BO is allocated per open file context, because even though the Vulkan spec mandates that writes into sparsely bound regions must be discarded, our implementation is still a workaround over the fact Mali CSF GPUs cannot support this behaviour on the hardware level, so writes still make it into the backing BO. If we had a global one, then it could be a venue for information leaks between file contexts, which should never happen in DRM. As a side note, care was put to adjust dummy BO offsets for sparse mappings so that all addresses in the new VA are mapped aligned against it. Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Link: https://patch.msgid.link/20260522185206.2798288-6-adrian.larumbe@collabora.com Signed-off-by: Steven Price <steven.price@arm.com> |
||
|
Adrián Larumbe
|
8e54aac5af |
drm/panthor: Delete spurious whitespace from uAPI header
There's no extra blank line after the last member of any other uAPI structures, so delete it. Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com> Link: https://patch.msgid.link/20260522185206.2798288-4-adrian.larumbe@collabora.com Signed-off-by: Steven Price <steven.price@arm.com> |
||
|
Adrián Larumbe
|
6c1427fd03 |
drm/panthor: Expose GPU page sizes to UM
In future commits that will implement repeated mappings, only repeat values multiple of GPU page sizes will be tolerated. That means these values must be made known to UM. Do it through a queriable GPU info value. Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com> Link: https://patch.msgid.link/20260522185206.2798288-2-adrian.larumbe@collabora.com Signed-off-by: Steven Price <steven.price@arm.com> |
||
|
Sven Eckelmann
|
f3ff3eb0d6
|
batman-adv: uapi: keep kernel-doc in struct member order
The order of the members of struct batadv_coded_packet and struct batadv_unicast_tvlv_packet didn't match the kernel doc. This is the case for all other structures and should also be done the same way for these two. Signed-off-by: Sven Eckelmann <sven@narfation.org> |
||
|
Jakub Kicinski
|
8d72997dab |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-7.1-rc7). Silent conflicts: net/wireless/nl80211.c |
||
|
Antony Antony
|
a9d155ea9b |
xfrm: add XFRM_MSG_MIGRATE_STATE for single SA migration
Add a new netlink method to migrate a single xfrm_state. Unlike the existing migration mechanism (SA + policy), this supports migrating only the SA and allows changing the reqid. The SA is looked up via xfrm_usersa_id, which uniquely identifies it, so old_saddr is not needed. old_daddr is carried in xfrm_usersa_id.daddr. The reqid is invariant in the old migration. Signed-off-by: Antony Antony <antony.antony@secunet.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> |
||
|
Kuniyuki Iwashima
|
afabbb56a7 |
geneve: Introduce IFLA_GENEVE_LOCAL and IFLA_GENEVE_LOCAL6.
By default, a GENEVE device bind()s its underlying UDP socket(s) to
the IPv4 or IPv6 wildcard address because there is no way to specify
a specific local IP address to bind() to.
This prevents deploying multiple GENEVE devices on a multi-homed host
where each device should be isolated and bound to a different local IP
address on the same UDP port.
Let's introduce new options, IFLA_GENEVE_LOCAL and IFLA_GENEVE_LOCAL6,
to allow specifying a local IPv4/IPv6 address for the backend UDP
socket.
By default, when collect metadata mode (IFLA_GENEVE_COLLECT_METADATA)
is enabled, both IPv4 and IPv6 sockets are created. However, if a
source address is specified via the new attributes, only a single
socket corresponding to that specific address family is created.
Accordingly, geneve_find_sock() and geneve_find_dev() are updated to
take the source address into account, ensuring that multiple devices
and sockets configured with different source addresses can coexist
without conflict.
In addition, the source address is validated in geneve_xmit_skb()
and geneve6_xmit_skb(), so the BPF prog must set it in bpf_tunnel_key.
With this change, multiple GENEVE devices can be successfully created
and bound to their respective local IP addresses:
(*) "local" is the keyword for IFLA_GENEVE_LOCAL / IFLA_GENEVE_LOCAL6
# for i in $(seq 1 2);
do
ip link add geneve4_${i} type geneve local 192.168.0.${i} external
ip addr add 192.168.0.${i}/24 dev geneve4_${i}
ip link set geneve4_${i} up
ip link add geneve6_${i} type geneve local 2001:9292::${i} external
ip addr add 2001:9292::${i}/64 dev geneve6_${i} nodad
ip link set geneve6_${i} up
done
# ip -d l | grep geneve
9: geneve4_1: <BROADCAST,MULTICAST,UP,LOWER_UP> ...
geneve external id 0 local 192.168.0.1 ...
10: geneve6_1: <BROADCAST,MULTICAST,UP,LOWER_UP> ...
geneve external id 0 local 2001:9292::1 ...
11: geneve4_2: <BROADCAST,MULTICAST,UP,LOWER_UP> ...
geneve external id 0 local 192.168.0.2 ...
12: geneve6_2: <BROADCAST,MULTICAST,UP,LOWER_UP> ...
geneve external id 0 local 2001:9292::2 ...
# ss -ua | grep geneve
UNCONN 0 0 192.168.0.2:geneve 0.0.0.0:*
UNCONN 0 0 192.168.0.1:geneve 0.0.0.0:*
UNCONN 0 0 [2001:9292::2]:geneve *:*
UNCONN 0 0 [2001:9292::1]:geneve *:*
Note that even if the local address is explicitly configured with
the wildcard address, kernel does not dump it except for devices with
IFLA_GENEVE_COLLECT_METADATA. This is consistent with the behaviour
of is_tnl_info_zero(), which treats the wildcard remote address as not
configured.
## ynl example.
# ./tools/net/ynl/pyynl/cli.py \
--spec ./Documentation/netlink/specs/rt-link.yaml \
--do newlink --create \
--json '{"ifname": "geneve0",
"linkinfo": {"kind":"geneve",
"data": {"local": "0.0.0.0",
"collect-metadata": true}}}'
# ./tools/net/ynl/pyynl/cli.py \
--spec ./Documentation/netlink/specs/rt-link.yaml \
--do getlink \
--json '{"ifname": "geneve0"}' --output-json | \
jq .linkinfo.data.local
"0.0.0.0"
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260602190436.139591-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Dave Airlie
|
44c460d2cc |
Merge tag 'drm-msm-next-2026-05-30' of https://gitlab.freedesktop.org/drm/msm into drm-next
Changes for v7.2 Core: - Fixed documentation for msm_gem_shrinker functions - IFPC related enablement/fixes for gen8 - PERFCNTR_CONFIG ioctl support GPU - Reworked handling of UBWC configuration - a810 suppport MDSS: - Added Milos platform support - Reworked handling of UBWC configuration DisplayPort: - Reworked HPD handling, preparing for the MST support DPU: - Added Milos platform support - Reworked handling of UBWC configuration DSI: - Added Milos platform support Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <rob.clark@oss.qualcomm.com> Link: https://patch.msgid.link/CACSVV00DXZcvFH2-C3fouve5DGs0DGa-vvsJPuaRmUZZVNKOfg@mail.gmail.com |
||
|
Thomas Gleixner
|
3ca9595d9f |
futex: Add support for unlocking robust futexes
Unlocking robust non-PI futexes happens in user space with the following sequence: 1) robust_list_set_op_pending(mutex); 2) robust_list_remove(mutex); lval = 0; 3) lval = atomic_xchg(lock, lval); 4) if (lval & WAITERS) 5) sys_futex(WAKE,....); 6) robust_list_clear_op_pending(); That opens a window between #3 and #6 where the mutex could be acquired by some other task which observes that it is the last user and: A) unmaps the mutex memory B) maps a different file, which ends up covering the same address When the original task exits before reaching #6 then the kernel robust list handling observes the pending op entry and tries to fix up user space. In case that the newly mapped data contains the TID of the exiting thread at the address of the mutex/futex the kernel will set the owner died bit in that memory and therefore corrupting unrelated data. PI futexes have a similar problem both for the non-contented user space unlock and the in kernel unlock: 1) robust_list_set_op_pending(mutex); 2) robust_list_remove(mutex); lval = gettid(); 3) if (!atomic_try_cmpxchg(lock, lval, 0)) 4) sys_futex(UNLOCK_PI,....); 5) robust_list_clear_op_pending(); Address the first part of the problem where the futexes have waiters and need to enter the kernel anyway. Add a new FUTEX_ROBUST_UNLOCK flag, which is valid for the sys_futex() FUTEX_UNLOCK_PI, FUTEX_WAKE, FUTEX_WAKE_BITSET operations. This deliberately omits FUTEX_WAKE_OP from this treatment as it's unclear whether this is needed and there is no usage of it in glibc either to investigate. For the futex2 syscall family this needs to be implemented with a new syscall. The sys_futex() case [ab]uses the @uaddr2 argument to hand the pointer to robust_list_head::list_pending_op into the kernel. This argument is only evaluated when the FUTEX_ROBUST_UNLOCK bit is set and is therefore backward compatible. This is an explicit argument to avoid the lookup of the robust list pointer and retrieving the pending op pointer from there. User space has the pointer already available so it can just put it into the @uaddr2 argument. Aside of that this allows the usage of multiple robust lists in the future without any changes to the internal functions as they just operate on the provided pointer. This requires a second flag FUTEX_ROBUST_LIST32 which indicates that the robust list pointer points to an u32 and not to an u64. This is required for two reasons: 1) sys_futex() has no compat variant 2) The gaming emulators use both both 64-bit and compat 32-bit robust lists in the same 64-bit application As a consequence 32-bit applications have to set this flag unconditionally so they can run on a 64-bit kernel in compat mode unmodified. 32-bit kernels return an error code when the flag is not set. 64-bit kernels will happily clear the full 64 bits if user space fails to set it. In case of FUTEX_UNLOCK_PI this clears the robust list pending op when the unlock succeeded. In case of errors, the user space value is still locked by the caller and therefore the above cannot happen. In case of FUTEX_WAKE* this does the unlock of the futex in the kernel and clears the robust list pending op when the unlock was successful. If not, the user space value is still locked and user space has to deal with the returned error. That means that the unlocking of non-PI robust futexes has to use the same try_cmpxchg() unlock scheme as PI futexes. If the clearing of the pending list op fails (fault) then the kernel clears the registered robust list pointer if it matches to prevent that exit() will try to handle invalid data. That's a valid paranoid decision because the robust list head sits usually in the TLS and if the TLS is not longer accessible then the chance for fixing up the resulting mess is very close to zero. The problem of non-contended unlocks still exists and will be addressed separately. Signed-off-by: Thomas Gleixner <tglx@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: André Almeida <andrealmeid@igalia.com> Link: https://patch.msgid.link/20260602090535.670514505@kernel.org |
||
|
Thomas Gleixner
|
1fd053d26f |
futex: Cleanup UAPI defines
Make the operand defines tabular for readability sake. Signed-off-by: Thomas Gleixner <tglx@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: André Almeida <andrealmeid@igalia.com> Link: https://patch.msgid.link/20260602090535.615600933@kernel.org |
||
|
Thomas Gleixner
|
2cb5251d3d |
futex: Provide UABI defines for robust list entry modifiers
The marker for PI futexes in the robust list is a hardcoded 0x1 which lacks any sensible form of documentation. Provide proper defines for the bit and the mask and fix up the usage sites. Thereby convert the boolean pi argument into a modifier argument, which allows new modifier bits to be trivially added and conveyed. Signed-off-by: Thomas Gleixner <tglx@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reviewed-by: André Almeida <andrealmeid@igalia.com> Link: https://patch.msgid.link/20260602090535.458758556@kernel.org |
||
|
Linus Torvalds
|
ba3e43a9e6 |
soc: fixes for 7.1, part 2
Following the previous set of fixes, this addresses another significant
number of small issues found in firmware drivers (tee, optee, qcomtee,
qcom ice, exynos acpm) drivers through various tools. This is about
error handling, resource leaks, concurrency and a use-after-free bug.
The fixes for the Qualcomm ICE driver also introduce interface changes
in the UFS and MMC drivers using it.
Outside of firmware drivers, there are a few fixes across the tree:
- Minor driver code mistakes in the Atmel EBI memory controller,
the i.MX soc ID driver and socfpga boot logic
- A defconfig change to avoid a boot time regression on multiple
qualcomm boards
- Device tree fixes for qualcomm, at91 and gemini, addressing
mostly minor configuration mistakes
-----BEGIN PGP SIGNATURE-----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=uqVQ
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Following the previous set of fixes, this addresses another
significant number of small issues found in firmware drivers (tee,
optee, qcomtee, qcom ice, exynos acpm) drivers through various tools.
This is about error handling, resource leaks, concurrency and a
use-after-free bug.
The fixes for the Qualcomm ICE driver also introduce interface changes
in the UFS and MMC drivers using it.
Outside of firmware drivers, there are a few fixes across the tree:
- Minor driver code mistakes in the Atmel EBI memory controller, the
i.MX soc ID driver and socfpga boot logic
- A defconfig change to avoid a boot time regression on multiple
qualcomm boards
- Device tree fixes for qualcomm, at91 and gemini, addressing mostly
minor configuration mistakes"
* tag 'soc-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits)
firmware: samsung: acpm: Fix infinite loop on sequence number exhaustion
firmware: samsung: acpm: Fix missing LKMM barriers in sequence allocator
firmware: samsung: acpm: Fix false timeouts and Use-After-Free in polling
ARM: dts: gemini: Fix partition offsets
ARM: socfpga: Fix OF node refcount leak in SMP setup
soc: qcom: ice: Fix the error code when 'qcom,ice' property is not found
arm64: dts: qcom: eliza: Add power-domain and iface clk for ice node
arm64: dts: qcom: milos: Add power-domain and iface clk for ice node
tee: qcomtee: add missing va_end in early return qcomtee_object_user_init()
tee: fix params_from_user() error path in tee_ioctl_supp_recv
tee: shm: fix shm leak in register_shm_helper()
tee: fix tee_ioctl_object_invoke_arg padding
arm64: defconfig: Enable PCI M.2 power sequencing driver
scsi: ufs: ufs-qcom: Remove NULL check from devm_of_qcom_ice_get()
mmc: sdhci-msm: Remove NULL check from devm_of_qcom_ice_get()
soc: qcom: ice: Return proper error codes from devm_of_qcom_ice_get() instead of NULL
soc: qcom: ice: Return -ENODEV if the ICE platform device is not found
soc: qcom: ice: Fix race between qcom_ice_probe() and of_qcom_ice_get()
ARM: dts: microchip: sam9x7: fix GMAC clock configuration
firmware: samsung: acpm: Fix mailbox channel leak on probe error
...
|
||
|
Jonathan Cameron
|
c82228f76a |
Linux 7.1-rc6
-----BEGIN PGP SIGNATURE----- iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmocssAeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGsvMIAIYkDW1HujnkP3/G SzQuQozH30O8Fpxdo+axRG6DweP2DTW1lD35YPJJsVto0G2BJZVjzsrx8RSgV6uz DDY+Y0x0/VknMZ4JDrDoWRIyHaVV6p3+NcSHhwrxctQsa8UdEf4aXGaTf91nIBSB GCX5R2YxxuQSTMZ19F/e+UShnRC5OO0FbCB5xhSnUJX3+eoRe0mcGAQB4DBUKxsx BZ5DMOmoiEyPFJbdmy11X0epgJ32qgL7HPYLEo44Vcfy/Ot9lrL9b4vKbG+b3N1P YAZccYH/dlpUuk7piR37H87Ntgz/SZcYbJlx2iAWoNk4tMmfRUO16igar8yFHjSt FLN2Zx4= =ufVr -----END PGP SIGNATURE----- Merge tag 'v7.1-rc6' into work Linux 7.1-rc6 |
||
|
Vicki Pfau
|
c6f1363abb |
Input: userio - allow setting other id values
Previously, only the type value was settable. The proto value is used internally for choosing the right drivers, so we should expose it. The other values make sense to expose as well. Signed-off-by: Vicki Pfau <vi@endrift.com> Link: https://patch.msgid.link/20260522015040.3953472-2-vi@endrift.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> |
||
|
Vicki Pfau
|
37340ac2c7 |
Input: userio - update maintainer name
She's been committing under the name Lyude Paul for a while Signed-off-by: Vicki Pfau <vi@endrift.com> Link: https://patch.msgid.link/20260522015040.3953472-1-vi@endrift.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> |
||
|
Rob Herring (Arm)
|
17cdb54644 |
accel: ethosu: Add performance counter support
The Arm Ethos-U NPUs have a PMU with performance counters. The PMU h/w supports up to 4 (U65) or 8 (U85) counters which can be programmed for different events. There is also a dedicated cycle counter. The ABI and implementation are copied from the V3D driver. The main difference in the ABI is there is no query API for the event list. The events differ between the U65 and U85, so the events lists are maintained in userspace along with other differences between the U65 and U85. The cycle counter is always enabled when the PMU is enabled. When the user requests N events, reading the counters will return the N events plus the cycle counter. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net> Reviewed-by: Maíra Canal <mcanal@igalia.com> Link: https://patch.msgid.link/20260601173814.250071-1-tomeu@tomeuvizoso.net --- v2: - Use XArray instead of idr - Rework locking to use per device spinlock to protect modifying active perfmon. Based on pending V3D changes: https://lore.kernel.org/all/20260508-v3d-perfmon-lifetime-v1-1-f5b5642c085f@igalia.com/ - Add missing perfmon puts in ethosu_ioctl_perfmon_set_global() and ethosu_ioctl_perfmon_get_values() error paths. - Fix reading number of counters on U85. - Add defines NPU_REG_PMCCNTR_CFG v3: - Add explicit padding to drm_ethosu_perfmon_destroy - Fix SPDX license expression - Fix comment typos - Convert perfmon lock from spinlock to mutex - Simplify switch_perfmon condition check - Remove unused ethosu_perfmon_init - Add lockdep_assert_held to ethosu_perfmon_stop_locked v4: - Use drmm_mutex_init() for perfmon lock - Add lockdep_assert_held() to ethosu_perfmon_start() - Fix a few style issues reported by Maíra |
||
|
Greg Kroah-Hartman
|
b586d69177 |
Linux 7.1-rc6
-----BEGIN PGP SIGNATURE----- iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmocssAeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGsvMIAIYkDW1HujnkP3/G SzQuQozH30O8Fpxdo+axRG6DweP2DTW1lD35YPJJsVto0G2BJZVjzsrx8RSgV6uz DDY+Y0x0/VknMZ4JDrDoWRIyHaVV6p3+NcSHhwrxctQsa8UdEf4aXGaTf91nIBSB GCX5R2YxxuQSTMZ19F/e+UShnRC5OO0FbCB5xhSnUJX3+eoRe0mcGAQB4DBUKxsx BZ5DMOmoiEyPFJbdmy11X0epgJ32qgL7HPYLEo44Vcfy/Ot9lrL9b4vKbG+b3N1P YAZccYH/dlpUuk7piR37H87Ntgz/SZcYbJlx2iAWoNk4tMmfRUO16igar8yFHjSt FLN2Zx4= =ufVr -----END PGP SIGNATURE----- Merge tag 'v7.1-rc6' into tty-next We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Jeff Layton
|
70b7e3526c |
nfsd: add NFSD_CMD_CACHE_FLUSH netlink command
Add a new NFSD_CMD_CACHE_FLUSH generic netlink command that allows userspace to flush the nfsd export caches (svc_export and expkey) without writing to /proc/net/rpc/*/flush. An optional NFSD_A_CACHE_FLUSH_MASK u32 attribute selects which caches to flush (bit 1 = svc_export, bit 2 = expkey). If the attribute is omitted, all nfsd caches are flushed. This is used by exportfs to replace its /proc-based cache_flush() with a netlink equivalent, with /proc fallback for older kernels. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Jeff Layton
|
565ee23ea2 |
sunrpc: add SUNRPC_CMD_CACHE_FLUSH netlink command
Add a new SUNRPC_CMD_CACHE_FLUSH generic netlink command that allows userspace to flush the sunrpc auth caches (ip_map and unix_gid) without writing to /proc/net/rpc/*/flush. An optional SUNRPC_A_CACHE_FLUSH_MASK u32 attribute selects which caches to flush (bit 1 = ip_map, bit 2 = unix_gid). If the attribute is omitted, all sunrpc caches are flushed. This is used by exportfs to replace its /proc-based cache_flush() with a netlink equivalent, with /proc fallback for older kernels. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Jeff Layton
|
01c2305795 |
nfsd: add netlink upcall for the nfsd.fh cache
Add netlink-based cache upcall support for the expkey (nfsd.fh) cache, following the same pattern as the existing svc_export netlink support. Add expkey to the cache-type enum, a new expkey attribute-set with client, fsidtype, fsid, negative, expiry, and path fields, and the expkey-get-reqs / expkey-set-reqs operations to the nfsd YAML spec and generated headers. Implement nfsd_nl_expkey_get_reqs_dumpit() which snapshots pending expkey cache requests and sends each entry's seqno, client name, fsidtype, and fsid over netlink. Implement nfsd_nl_expkey_set_reqs_doit() which parses expkey cache responses from userspace (client, fsidtype, fsid, expiry, and path or negative flag) and updates the cache via svc_expkey_lookup() / svc_expkey_update(). Wire up the expkey_notify() callback in svc_expkey_cache_template so cache misses trigger NFSD_CMD_CACHE_NOTIFY multicast events with NFSD_CACHE_TYPE_EXPKEY. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Jeff Layton
|
912fc994b9 |
nfsd: add netlink upcall for the svc_export cache
Add netlink-based cache upcall support for the svc_export (nfsd.export) cache to Documentation/netlink/specs/nfsd.yaml and regenerate the resulting files. Implement nfsd_cache_notify() which sends a NFSD_CMD_CACHE_NOTIFY multicast event to the "exportd" group, carrying the cache type so userspace knows which cache has pending requests. Implement nfsd_nl_svc_export_get_reqs_dumpit() which snapshots pending svc_export cache requests and sends each entry's seqno, client name, and path over netlink. Implement nfsd_nl_svc_export_set_reqs_doit() which parses svc_export cache responses from userspace (client, path, expiry, flags, anon uid/gid, fslocations, uuid, secinfo, xprtsec, fsid, or negative flag) and updates the cache via svc_export_lookup() / svc_export_update(). Wire up the svc_export_notify() callback in svc_export_cache_template so cache misses trigger NFSD_CMD_CACHE_NOTIFY multicast events with NFSD_CACHE_TYPE_SVC_EXPORT. Note that the export-flags and xprtsec-mode enums are organized to match their counterparts in include/uapi/linux/nfsd/export.h. The intent is that future export options will only be added to the netlink headers, which should eliminate the need to keep so much in sync. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Jeff Layton
|
0850e8603c |
sunrpc: add netlink upcall for the auth.unix.gid cache
Add netlink-based cache upcall support for the unix_gid (auth.unix.gid) cache, using the sunrpc generic netlink family. Add unix-gid attribute-set (seqno, uid, gids multi-attr, negative, expiry), unix-gid-reqs wrapper, and unix-gid-get-reqs / unix-gid-set-reqs operations to the sunrpc_cache YAML spec and generated headers. Implement sunrpc_nl_unix_gid_get_reqs_dumpit() which snapshots pending unix_gid cache requests and sends each entry's seqno and uid over netlink. Implement sunrpc_nl_unix_gid_set_reqs_doit() which parses unix_gid cache responses from userspace (uid, expiry, gids as u32 multi-attr or negative flag) and updates the cache via unix_gid_lookup() / sunrpc_cache_update(). Wire up unix_gid_notify() callback in unix_gid_cache_template so cache misses trigger SUNRPC_CMD_CACHE_NOTIFY multicast events with SUNRPC_CACHE_TYPE_UNIX_GID. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Jeff Layton
|
712bdbb215 |
sunrpc: add netlink upcall for the auth.unix.ip cache
Add netlink-based cache upcall support for the ip_map (auth.unix.ip) cache, using the sunrpc generic netlink family. Add ip-map attribute-set (seqno, class, addr, domain, negative, expiry), ip-map-reqs wrapper, and ip-map-get-reqs / ip-map-set-reqs operations to the sunrpc_cache YAML spec and generated headers. Implement sunrpc_nl_ip_map_get_reqs_dumpit() which snapshots pending ip_map cache requests and sends each entry's seqno, class name, and IP address over netlink. Implement sunrpc_nl_ip_map_set_reqs_doit() which parses ip_map cache responses from userspace (class, addr, expiry, and domain name or negative flag) and updates the cache via __ip_map_lookup() / __ip_map_update(). Wire up ip_map_notify() callback in ip_map_cache_template so cache misses trigger SUNRPC_CMD_CACHE_NOTIFY multicast events with SUNRPC_CACHE_TYPE_IP_MAP. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Jeff Layton
|
af81cb247c |
sunrpc: add a generic netlink family for cache upcalls
The auth.unix.ip and auth.unix.gid caches live in the sunrpc module, so they cannot use the nfsd generic netlink family. Create a new "sunrpc" generic netlink family with its own "exportd" multicast group to support cache upcall notifications for sunrpc-resident caches. Define a YAML spec (sunrpc_cache.yaml) with a cache-type enum (ip_map, unix_gid), a cache-notify multicast event, and the corresponding uapi header. Implement sunrpc_cache_notify() in cache.c, which checks for listeners on the exportd multicast group, builds and sends a SUNRPC_CMD_CACHE_NOTIFY message with the cache-type attribute. Register/unregister the sunrpc_nl_family in init_sunrpc() and cleanup_sunrpc(). Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
|
Chuck Lever
|
1cd8fad24a | Merge remote-tracking branches 'vfs/vfs-7.2.casefold', 'vfs/vfs-7.2.directory.delegations' and 'vfs/vfs-7.2.exportfs' into vfs-7.2-merge | ||
|
Luca Boccassi
|
4c08a9f38c |
liveupdate: add LIVEUPDATE_SESSION_GET_NAME ioctl
Userspace when requesting a session via the ioctl specifies a name and gets a FD, but then there is no ioctl to go back the other way and get the name given a LUO session FD. This is problematic especially when there is a userspace orchestrator that wants to check what FDs it is handling for clients without having to do manual string scraping of procfs, or without procfs at all. Add a ioctl to simply get the name from an FD. Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Reviewed-by: Pratyush Yadav <pratyush@kernel.org> Link: https://lore.kernel.org/r/20260429212221.814107-4-luca.boccassi@gmail.com Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> |
||
|
Liviu Stan
|
622775dbc5 |
iio: core: Add IIO_COVERAGE channel type
Add a new channel type for sensors that report fractional coverage as a percentage. The sysfs attribute is in_coverageY_raw; after applying in_coverageY_scale the value is in percent. The first user is the ADT7604 leak detector, where the value represents the portion of the sensing element that is wetted. Signed-off-by: Liviu Stan <liviu.stan@analog.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> |
||
|
Jiri Pirko
|
d7a40b5194 |
RDMA/uverbs: Expose CoCo DMA bounce requirement to userspace
In CoCo guests, guest memory is encrypted and untrusted (T=0) devices cannot DMA to it directly; such transfers must go through unencrypted bounce buffers. RDMA registers user pages for direct device access, bypassing the DMA layer and thus any bouncing, so registered memory does not work in this configuration. Until trusted (T=1) device detection is available, conservatively flag every device attached to a CoCo guest. Expose the condition to userspace as IB_UVERBS_DEVICE_CC_DMA_BOUNCE in device_cap_flags_ex so applications can avoid memory registration and fall back to copying buffers through send/recv. Link: https://patch.msgid.link/r/20260517141311.2409230-2-jiri@resnulli.us Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
Jiri Pirko
|
93ce776a5b |
RDMA/mlx5: Use UMEM attribute for QP doorbell record
Add an optional mlx5 driver-namespace UMEM attribute on QP create so userspace can supply the doorbell record umem explicitly, symmetric to the CQ side. Resolve it inside mlx5_ib_db_map_user() and use it as a private DBR page when present; otherwise take the existing UHW share-or-pin path that preserves per-page DBR sharing across CQ/QP/SRQ in the same process. Add mlx5's first UVERBS_OBJECT_QP UAPI definition chain to attach the new attr. Link: https://patch.msgid.link/r/20260529134312.2836341-17-jiri@resnulli.us Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
Jiri Pirko
|
d6ab1d2439 |
RDMA/mlx5: Use UMEM attribute for CQ doorbell record
Add an optional mlx5 driver-namespace UMEM attribute on CQ create so userspace can supply the doorbell record buffer explicitly. mlx5_ib_db_map_user() resolves the attribute (or falls back to the legacy UHW VA) into a struct ib_uverbs_buffer_desc and runs a unified lookup-then-pin: VA-typed descriptors share a per-page umem across CQ/QP/SRQ in the same process, FD-typed descriptors are pinned per call. Link: https://patch.msgid.link/r/20260529134312.2836341-16-jiri@resnulli.us Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
Jiri Pirko
|
cd767d980c |
RDMA/uverbs: Use UMEM attributes for QP creation
Apply the per-attribute UMEM model to the QP create method. Add three optional UMEM attributes that drivers pick from based on how their user ABI lays out the QP rings: - CREATE_QP_BUF_UMEM is a single user buffer that backs both the SQ and RQ of one QP. This is the common case where userspace pins one contiguous WQE region for the QP. - CREATE_QP_SQ_BUF_UMEM and CREATE_QP_RQ_BUF_UMEM are a pair of user buffers backing the SQ and RQ independently, used when the two rings live in physically distinct user allocations and must be pinned and addressed separately. Existing drivers would map their current umems as follows: - mlx5: BUF for normal QPs (one ucmd->buf_addr covers SQ+RQ); for IB_QPT_RAW_PACKET and IB_QP_CREATE_SOURCE_QPN, the RQ side comes from ucmd->buf_addr (RQ-sized) via RQ_BUF and the SQ from ucmd->sq_buf_addr via SQ_BUF. - mlx4: BUF, single ucmd.buf_addr covering SQ+RQ. - hns: BUF, single ucmd.buf_addr covering SQ + ext-SGE + RQ. - erdma: BUF, single ureq.qbuf_va sliced by the kernel into SQ at offset 0 and RQ at rq_offset. - bnxt_re: SQ_BUF (ureq->qpsva) + RQ_BUF (ureq->qprva, the RQ side is skipped when the QP uses an SRQ). - vmw_pvrdma: SQ_BUF (sbuf_addr) + RQ_BUF (rbuf_addr, the RQ side is skipped when the QP uses an SRQ). - qedr: SQ_BUF (sq_addr) + RQ_BUF (rq_addr) for whichever side the QP type actually has (no SQ for XRC_TGT/GSI; no RQ for XRC_INI/XRC_TGT/SRQ). - ionic: SQ_BUF (req.sq.addr) + RQ_BUF (req.rq.addr); both are skipped when the rings are placed in CMB instead of host memory. - mana: raw-packet QP uses SQ_BUF (sq_buf_addr) only; the RC path uses multiple per-queue user buffers (ucmd.queue_buf[]) that do not fit the SQ/RQ pair semantics of these attrs and stays on the legacy UHW path. - efa, irdma, hfi1, ocrdma, mthca, cxgb4 and usnic do not pin a QP WQE buffer via umem; none of these attributes apply. Link: https://patch.msgid.link/r/20260529134312.2836341-13-jiri@resnulli.us Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
Jiri Pirko
|
f6d2e53ca5 |
RDMA/uverbs: Add CQ buffer UMEM attribute and driver helpers
Add UVERBS_ATTR_CREATE_CQ_BUF_UMEM and two driver-facing wrappers, ib_umem_get_cq_buf() and ib_umem_get_cq_buf_or_va(), that pin a CQ buffer umem from it. The wrappers reuse the existing legacy CQ buffer-attr filler. Link: https://patch.msgid.link/r/20260529134312.2836341-7-jiri@resnulli.us Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
Jiri Pirko
|
3cfdff484d |
RDMA/core: Introduce generic buffer descriptor infrastructure for umem
Introduce a per-attribute UVERBS_ATTR_UMEM model so each uverbs command's umem set is explicit in its UAPI definition. Add driver-facing wrapper helpers that pin a umem on demand from an attribute or a VA addr; the driver owns the returned umem and releases it from its destroy/error paths. Link: https://patch.msgid.link/r/20260529134312.2836341-4-jiri@resnulli.us Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
Rob Clark
|
a7b378c949 |
drm/msm: Add PERFCNTR_CONFIG ioctl
Add new UABI and implementation of PERFCNTR_CONFIG ioctl. A bit more work is required to configure the pwrup_reglist for the GMU to restore SELect regs on exit of IFPC, before we can stop disabling IFPC while global counter collection. This will follow in a later commit, but will be transparent to userspace. Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Reviewed-by: Anna Maniscalco <anna.maniscalco2000@gmail.com> Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/728217/ Message-ID: <20260526145137.160554-14-robin.clark@oss.qualcomm.com> |
||
|
Randy Dunlap
|
b397cc489a |
drm/tegra: tegra_drm.h: fix all uapi kernel-doc warnings
Add 2 struct member descriptions and convert #define macro constants comments to kernel-doc comments to eliminate all kernel-doc warnings: Warning: include/uapi/drm/tegra_drm.h:353 struct member 'cmdbuf' not described in 'drm_tegra_reloc' Warning: include/uapi/drm/tegra_drm.h:353 struct member 'target' not described in 'drm_tegra_reloc' Warning: include/uapi/drm/tegra_drm.h:780 This comment starts with '/**', but isn't a kernel-doc comment. * Specify that bit 39 of the patched-in address should be set to switch Warning: include/uapi/drm/tegra_drm.h:832 This comment starts with '/**', but isn't a kernel-doc comment. * Execute `words` words of Host1x opcodes specified in the `gather_data_ptr` Warning: include/uapi/drm/tegra_drm.h:837 This comment starts with '/**', but isn't a kernel-doc comment. * Wait for a syncpoint to reach a value before continuing with further Warning: include/uapi/drm/tegra_drm.h:842 This comment starts with '/**', but isn't a kernel-doc comment. * Wait for a syncpoint to reach a value before continuing with further Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patch.msgid.link/20260427184454.693794-1-rdunlap@infradead.org |
||
|
Arnd Bergmann
|
9193ffe5b4 |
TEE fixes for v7.1
Fixing: - params_from_user() cleanup in error path in tee_ioctl_supp_recv() - possible tee_shm leak in error path in register_shm_helper() - padding in struct tee_ioctl_object_invoke_arg -----BEGIN PGP SIGNATURE----- iQJOBAABCgA4FiEE0qerISgy2SKkqO79Wr/6JGat8H4FAmoNXF4aHGplbnMud2lr bGFuZGVyQGxpbmFyby5vcmcACgkQWr/6JGat8H7G0xAA4+Rytz+NnQJk/qh+6crH so6W3QtQPOlPcXRbiUO/eYQLiuhxP3OHvy1v+FGk9/InRDIL2WEPaglKzeHw1k7Z dtHc3fte9+rMpXQi0VpWle+iIDmbcSZo6i0LEq4K6K0zR+uHLvDiye31SN7Xh9y+ M2kmu3EYEuCnYcLScJASWXFh8zkBuE3ouxlRd237qy1ZaqirPSIBLfukES2/nKnd q16nSAb55oASCFE1tAJ/7p7ADIogYwY8zdIC9wPidcmCLC43cBpKcGMVukXY1TM/ H8qjY+eNQXu5wZbs08DXAFZcqfoPykUKtN66gaKj+eHfEuu/y67Fs1RV/L1fY4ER 82S69KGUY+uh9xBLV4WIAmF79VZLtFX9y55DyfzPIC7PLlu0/ov2+1pWcy5h/5Xl W2gQOTap0MnhTBPOzBN2kFArkC/lmgoufUGifIKGbxYw06ZaORUnIAUOorcItoq4 Sl1Yl48hQ5Wr1J6N++sa75O7cvoNX3zgLSEfJkZv8IvebZH2U8coTJBdmr1lD7pI 6W/QwQ4ZbNN2fhmQ1262coDddMEUFbDe60bKWDfnO9gCCvYtRSbWxX5j2ksclRw2 gr6t9giURM9H2IYMEDA5UaXH7WRCmKU1Mu3SqdsklHCwoXA6ie3gg1xRn3gY1Bw+ mGG1LrAIVXbVuDvoLEa2PE8= =iyqH -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmoYQSwACgkQmmx57+YA GNltaw/8CTK3hikzjTaIbJBDsXE46oNAn244rAYo8HXMM64sqrPHyEBIKPfdRpEp /jshVeNAfT6nA7qnt+PLPfB3w45L0Ugl29DmSIc2Drsb7Mzs0TCVfiW4tkBITbd5 9/n7FKNnIMvtEpUhZRSvgGZiJ98dC16R5aTmnCgXNSild6VLpu3sCrResX15Mkj5 SbKjOZmv7NziUEWAROrnznYZV+VIQiXLbYV5a66NxgSUptud55dcJWoyXXqTczzj +mA7RVPErcbNOCtBRzLmPVN0J9bIFQg8HGqacEhwQtslixkz2zcriNLQN/KjtXtF TDs3vy0LFb8TCYbe9P8QJHAuoKSVhCuifLy0v28Z7ozf5cIZ4nEPuvjomC8Mcr6e MjArB4Zb8QGk9MVAKg0Pt6a1tkA+5Ij1sxHJks4n3hGw0O1WJAH65VI2q53FoHPq 7isFbT5DS21OuoxUSZF+i+VacDsD5HEOfQVuoD3LNhKyRAlhaLA2ytf37ZOQtTAQ RR8ccjyssZbCqXMvyjcOiIgNwAmRQ/KkDNzWLNTdCPp7lZ6OzNfWKG5ljx9QG4zV qzcE8GgUjZnyuy+C8yN15vGhvXW6WSYfSQBzN7lpJI0Crq9IoUTch2aKjxBiXlhD MpXD/8FVueRXtLRj7h8nmVGSFP82lR15EPfYImpSe8WXVIs7Tyw= =CNbC -----END PGP SIGNATURE----- Merge tag 'tee-fixes-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into arm/fixes TEE fixes for v7.1 Fixing: - params_from_user() cleanup in error path in tee_ioctl_supp_recv() - possible tee_shm leak in error path in register_shm_helper() - padding in struct tee_ioctl_object_invoke_arg * tag 'tee-fixes-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee: tee: fix params_from_user() error path in tee_ioctl_supp_recv tee: shm: fix shm leak in register_shm_helper() tee: fix tee_ioctl_object_invoke_arg padding Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Simona Vetter
|
bed29492d4 |
Linux 7.1-rc5
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmoTZAYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGKZ0H/A8Ti79DXqEl4M6V
S1ZYfteuvyWCdygPfY7+CQsxS1EjfmeRXd0213n95jijUoXvAVe7HJ5FuroTltsF
LYqH3CAedeEWMO1rIZjuDs5J1BzWAh7b0/QoanTlAjI1ZL8c3Btj/o//PoQfztiS
HWlN/aCcsZTi9n0ewV9eQM9jdiuhBlpZujfDX90vYurxAB+3K2c1b0UN+Y4/zMXO
83zaDLMYhIh8cEaU52+23H9UpyfrT0B8n6YgqbU4ZBRIbgA1BC4gloT6B7OHFKfq
PAfjAOBfpe43K8lLUyfbkfNohNblLOboiMmekdf+j2y4wqpCO64o6WigCrZtxtHe
9znkJpM=
=H+I9
-----END PGP SIGNATURE-----
Merge v7.1-rc5 into drm-next
Boris Brezillion needs the gem lru fixes
|
||
|
Nicolin Chen
|
91561e1dc9 |
PCI: Add pci_ats_required() for CXL.cache capable devices
Controlled by IOMMU drivers, ATS can be enabled "on demand", when a given PASID on a device is attached to an I/O page table. This is working, even when a device has no translation on its RID (i.e., RID is IOMMU bypassed). However, certain PCIe devices require non-PASID ATS on their RID even when the RID is IOMMU bypassed. Call this "ATS always on" in IOMMU term. For example, CXL spec r4.0 notes in sec 3.2.5.13 Memory Type on CXL.cache: "To source requests on CXL.cache, devices need to get the Host Physical Address (HPA) from the Host by means of an ATS request on CXL.io." In other words, the CXL.cache capability requires ATS; otherwise, it can't access host physical memory. Introduce a new pci_ats_required() helper for the IOMMU driver to scan a PCI device and shift ATS policies between "on demand" and "always on". Add the support for CXL.cache devices first. Pre-CXL devices will be added in quirks.c file. Note that pci_ats_required() validates against pci_ats_supported(), so we ensure that untrusted devices (e.g. external ports) will not be always on. This maintains the existing ATS security policy regarding potential side- channel attacks via ATS. Cc: linux-cxl@vger.kernel.org Suggested-by: Vikram Sethi <vsethi@nvidia.com> Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Tested-by: Nirmoy Das <nirmoyd@nvidia.com> Acked-by: Nirmoy Das <nirmoyd@nvidia.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Reviewed-by: Yi Liu <yi.l.liu@intel.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> |
||
|
Tim Bird
|
0b13c6a618 |
llc: Add SPDX id lines to some llc source files
Most of the lls source files are missing SPDX-License-Identifier lines. Add appropriate IDs to these files, and remove other license info from the header. In once case, leave the existing id line and just remove the license reference text. Signed-off-by: Tim Bird <tim.bird@sony.com> Link: https://patch.msgid.link/20260522225508.24006-1-tim.bird@sony.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Clément Léger
|
6935f63146 |
io_uring/zcrx: add shared-memory notification statistics
Add support for an optional stats struct embedded in the refill queue region, allowing userspace to monitor copy-fallback in real-time. Userspace queries the stats struct size and alignment via IO_URING_QUERY_ZCRX_NOTIF (notif_stats_size / notif_stats_alignment), then provides a stats_offset in zcrx_notification_desc pointing to a location within the refill queue region. The kernel updates the stats counters in-place on every copy-fallback event. Signed-off-by: Clément Léger <cleger@meta.com> [pavel: rename io_uring_zcrx_notif_stats] Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://patch.msgid.link/f6af5a21015efea4b733b9d77aba22c637788fe4.1779189667.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Clément Léger
|
255180f703 |
io_uring/zcrx: notify user on frag copy fallback
Add a ZCRX_NOTIF_COPY notification type to signal userspace when a received fragment could not be delivered using zero-copy and was instead copied into a buffer. Signed-off-by: Clément Léger <cleger@meta.com> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://patch.msgid.link/3d54bcd8bf10b3a1e88beb0cd39c40c3937bea4f.1779189667.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Pavel Begunkov
|
0719e10d82 |
io_uring/zcrx: notify user when out of buffers
There are currently no easy ways for the user to know if zcrx is out of buffers and page pool fails to allocate. Add uapi for zcrx to communicate it back. It's implemented as a separate CQE, which for now is posted to the creator ctx. To use it, on registration the user space needs to pass an instance of struct zcrx_notification_desc, which tells the kernel the user_data for resulting CQEs and which event types are expected / allowed. When an allowed event happens, zcrx will post a CQE containing the specified user_data, and lower bits of cqe->res will be set to the event mask. Before the kernel could post another notification of the given type, the user needs to acknowledge that it processed the previous one by issuing IORING_REGISTER_ZCRX_CTRL with ZCRX_CTRL_ARM_NOTIFICATION. The only notification type the patch implements is ZCRX_NOTIF_NO_BUFFERS, but we'll need more of them in the future. Co-developed-by: Vishwanath Seshagiri <vishs@meta.com> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Vishwanath Seshagiri <vishs@meta.com> Link: https://patch.msgid.link/35cd307a03a43583838a2e151fc641c69abd786f.1779189667.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Dave Airlie
|
40149d887c |
Merge tag 'drm-misc-next-2026-05-21' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.2-rc1: UAPI Changes: - Add VIRTIO_GPU_F_BLOB_ALIGNMENT flag. Cross-subsystem Changes: - Add common TMDS character rate constants to video/hdmi and use those in bridge drivers. Core Changes: - Fix leak in drm_syncobj_find_fence. - Fix OOB reads related to DP-MST. - Create drm_get_bridge_by_endpoint and convert drivers to use it in preparation of hotplug. Driver Changes: - Assorted bugfixes and cleanups to accel/ethosu, imagination, virtio, rockchip. - Expandable device heap support to amdxdna, bridge/chipone-icn6211. - Add Surface Pro 12 panels. - Convert ite-it6211 to use drm hdmi audio helpers. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patch.msgid.link/f4034e3c-8290-49e1-9410-dc1f449265f4@linux.intel.com |
||
|
Jason Gunthorpe
|
e312f0ff9e |
Linux 7.1-rc5
-----BEGIN PGP SIGNATURE----- iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmoTZAYeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGKZ0H/A8Ti79DXqEl4M6V S1ZYfteuvyWCdygPfY7+CQsxS1EjfmeRXd0213n95jijUoXvAVe7HJ5FuroTltsF LYqH3CAedeEWMO1rIZjuDs5J1BzWAh7b0/QoanTlAjI1ZL8c3Btj/o//PoQfztiS HWlN/aCcsZTi9n0ewV9eQM9jdiuhBlpZujfDX90vYurxAB+3K2c1b0UN+Y4/zMXO 83zaDLMYhIh8cEaU52+23H9UpyfrT0B8n6YgqbU4ZBRIbgA1BC4gloT6B7OHFKfq PAfjAOBfpe43K8lLUyfbkfNohNblLOboiMmekdf+j2y4wqpCO64o6WigCrZtxtHe 9znkJpM= =H+I9 -----END PGP SIGNATURE----- Merge tag 'v7.1-rc5' into rdma.git for-next For dependencies in the following patches Resolve conflicts, use the goto labels from the rc tag. * tag 'v7.1-rc5': (1526 commits) Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
Sriharsha Basavapatna
|
47b730054f |
RDMA/bnxt_re: Enable app allocated QPs
The driver supports a new comp_mask: REQ_MASK_FIXED_QUE_ATTR. The application sets this comp_mask bit in the CREATE_QP ureq to indicate direct control of the QP. The driver goes through the required processing for app allocated QPs (previous patches). Only variable WQE mode is supported for these QPs. This patch removes an unused comp_mask: BNXT_RE_QP_REQ_MASK_VAR_WQE_SQ_SLOTS Link: https://patch.msgid.link/r/20260519150041.7251-10-sriharsha.basavapatna@broadcom.com Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
Sriharsha Basavapatna
|
7e812673a9 |
RDMA/bnxt_re: Support doorbells for app allocated QPs
App allocated QPs can use a separate doorbell for each QP. This doorbell region can be passed through a new driver specific DBR_HANDLE attribute, during QP creation. When this attribute is set, associate the QP with the given doorbell region. While the QP holds a reference to the dbr, the dbr itself cannot be destroyed and is rejected with EBUSY error. Link: https://patch.msgid.link/r/20260519150041.7251-9-sriharsha.basavapatna@broadcom.com Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
Sriharsha Basavapatna
|
9ce2a8c81c |
RDMA/bnxt_re: Update msn table size for app allocated QPs
For app allocated QPs, the driver shouldn't use slots/round-up logic to compute the msn table size. The application handles this logic and computes 'sq_npsn' and passes it to the driver using a new uapi parameter. Link: https://patch.msgid.link/r/20260519150041.7251-5-sriharsha.basavapatna@broadcom.com Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
Dorjoy Chowdhury
|
8b82cacad9
|
openat2: new OPENAT2_REGULAR flag support
This flag indicates the path should be opened if it's a regular file. This is useful to write secure programs that want to avoid being tricked into opening device nodes with special semantics while thinking they operate on regular files. This is a requested feature from the uapi-group[1]. The previously introduced EFTYPE error code is returned when the path doesn't refer to a regular file. For example, if openat2 is called on path /dev/null with OPENAT2_REGULAR in the flag param, it will return -EFTYPE. When used in combination with O_CREAT, either the regular file is created, or if the path already exists, it is opened if it's a regular file. Otherwise, -EFTYPE is returned. When OPENAT2_REGULAR is combined with O_DIRECTORY, -EINVAL is returned as it doesn't make sense to open a path that is both a directory and a regular file. The UAPI bit lives in the upper 32 bits of open_how::flags (((__u64)1 << 32)) so that open(2) and openat(2) -- whose @flags argument is a C int -- cannot physically express it. This is a structural guarantee, not a runtime mask: the bit is unrepresentable in 32 bits. Because the rest of the VFS open path narrows to 32 bits in several places (op->open_flag, f->f_flags, the unsigned open_flag argument of i_op->atomic_open()), build_open_flags() translates OPENAT2_REGULAR into a kernel-internal lower-32-bit carrier __O_REGULAR (bit 4, unused as an O_* on every architecture) before the assignment to op->open_flag. __O_REGULAR then rides through the existing channels exactly like __FMODE_EXEC. do_dentry_open() strips it so it cannot leak back to userspace via fcntl(F_GETFL). Four BUILD_BUG_ON_MSG() invariants in build_open_flags() prevent any future bit collision or accidental low-32 redefinition: - VALID_OPEN_FLAGS fits in 32 bits. - OPENAT2_REGULAR lives in the upper 32 bits. - OPENAT2_REGULAR does not alias any open()/openat() flag. - __O_REGULAR does not alias any user-visible flag. [1]: https://uapi-group.org/kernel-features/#ability-to-only-open-regular-files Christian Brauner <brauner@kernel.org> says: Move OPENAT2_REGULAR to the upper 32 bits of open_how::flags with a kernel-internal __O_REGULAR carrier so that open(2)/openat(2) cannot encode the flag; add BUILD_BUG_ON_MSG() invariants and register __O_REGULAR in the fcntl_init() allocation-uniqueness BUILD_BUG_ON() (bit count 21 -> 22). Signed-off-by: Dorjoy Chowdhury <dorjoychy111@gmail.com> Link: https://patch.msgid.link/20260328172314.45807-2-dorjoychy111@gmail.com Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Aleksa Sarai <aleksa@amutable.com> Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org> |
||
|
Wei Fang
|
0850005c26 |
net: dsa: add NETC switch tag support
The NXP NETC switch tag is a proprietary header added to frames after the
source MAC address. The switch tag has 3 types, and each type has 1 ~ 4
subtypes, the details are as follows.
Forward NXP switch tag (Type=0): Represents forwarded frames.
- SubType = 0 - Normal frame processing.
To_Port NXP switch tag (Type=1): Represents frames that are to be sent
to a specific switch port.
- SubType = 0. No request to perform timestamping.
- SubType = 1. Request to perform one-step timestamping.
- SubType = 2. Request to perform two-step timestamping.
- SubType = 3. Request to perform both one-step timestamping and
two-step timestamping.
To_Host NXP switch tag (Type=2): Represents frames redirected or copied
to the switch management port.
- SubType = 0. Received frames redirected or copied to the switch
management port.
- SubType = 1. Received frames redirected or copied to the switch
management port with captured timestamp at the switch port where
the frame was received.
- SubType = 2. Transmit timestamp response (two-step timestamping).
In addition, the length of different type switch tag is different, the
minimum length is 6 bytes, the maximum length is 14 bytes. Currently,
Forward tag, SubType 0 of To_Port tag and Subtype 0 of To_Host tag are
supported. More tags will be supported in the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-10-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
||
|
Dorjoy Chowdhury
|
cf1b04aaef
|
openat2: introduce EFTYPE error code
Introduce a new error code EFTYPE for wrong file type operations. EFTYPE is already used in BSD systems like FreeBSD and macOS. This will be used by the upcoming OPENAT2_REGULAR flag support to return a specific error when a path doesn't refer to a regular file. Signed-off-by: Dorjoy Chowdhury <dorjoychy111@gmail.com> Link: https://patch.msgid.link/20260328172314.45807-2-dorjoychy111@gmail.com Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Aleksa Sarai <aleksa@amutable.com> Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org> |
||
|
Jori Koolstra
|
31cf44efa6
|
vfs: add O_EMPTYPATH to openat(2)/openat2(2)
To get an operable version of an O_PATH file descriptor, it is possible
to use openat(fd, ".", O_DIRECTORY) for directories, but other files
currently require going through open("/proc/<pid>/fd/<nr>"), which
depends on a functioning procfs.
This patch adds the O_EMPTYPATH flag to openat(2)/openat2(2). If passed,
LOOKUP_EMPTY is set at path resolution time.
Note: This implies that you cannot rely anymore on disabling procfs from
being mounted (e.g. inside a container without procfs mounted and with
CAP_SYS_ADMIN dropped) to prevent O_PATH fds from being re-opened
read-write.
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Link: https://patch.msgid.link/20260424114611.1678641-2-jkoolstra@xs4all.nl
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
||
|
Barnabás Pőcze
|
27caa94f4d |
media: rkisp1: Add support for CAC
The CAC block implements chromatic aberration correction. Expose it to userspace using the extensible parameters format. This was tested on the i.MX8MP platform, but based on available documentation it is also present in the RK3399 variant (V10). Thus presumably also in later versions, so no feature flag is introduced. Signed-off-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patch.msgid.link/20260511150957.581049-1-barnabas.pocze@ideasonboard.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org> |
||
|
Niklas Söderlund
|
c4c01c4fd4 |
media: uapi: rkisp: Correct name version enum
The name of the enum to hold the mapping of parameter buffer versions
have a typo in the name, correct it. While this is a uAPI header the
impact should be minimal as the enum is only used as a collection for
the one version number supported.
Fixes:
|
||
|
Sergio Lopez
|
6bd7e82e26 |
drm/virtio: add VIRTGPU_PARAM_BLOB_ALIGNMENT to params
Add VIRTGPU_PARAM_BLOB_ALIGNMENT as a param that can be read with VIRTGPU_GETPARAM by userspace applications running in the guest to obtain the host's page size and find out the right alignment to be used in shared memory allocations. Signed-off-by: Sergio Lopez <slp@redhat.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patch.msgid.link/20260428194450.518296-4-slp@redhat.com |
||
|
Sergio Lopez
|
7b5121c337 |
drm/virtio: support VIRTIO_GPU_F_BLOB_ALIGNMENT
Support VIRTIO_GPU_F_BLOB_ALIGNMENT, a feature that indicates the device provides a valid blob_alignment field in its configuration, and that both RESOURCE_CREATE_BLOB and RESOURCE_MAP_BLOB requests must be aligned to that value. Signed-off-by: Sergio Lopez <slp@redhat.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patch.msgid.link/20260428194450.518296-2-slp@redhat.com |
||
|
Arnd Bergmann
|
c15d7a2a11 |
tee: fix tee_ioctl_object_invoke_arg padding
The tee_ioctl_object_invoke_arg structure has padding on some
architectures but not on x86-32 and a few others:
include/linux/tee.h:474:32: error: padding struct to align 'params' [-Werror=padded]
I expect that all current users of this are on architectures that do
have implicit padding here (arm64, arm, x86, riscv), so make the padding
explicit in order to avoid surprises if this later gets used elsewhere.
Fixes:
|
||
|
Vadim Fedorenko
|
9bf93cb2e1 |
pps: bump PPS device count
Modern systems may have more than 16 PPS sources and current hard-coded limit breaks registration of some devices. Let's bump the limit to 256 in hope it will be enough in foreseen future. Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Link: https://patch.msgid.link/20260515135028.2021318-1-vadim.fedorenko@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Hans Verkuil
|
79500c929d |
media: include/uapi/linux/cec*: clarify which msgs are CEC 2.0
Drop comments about CEC 2.0 from cec-funcs.h. In cec.h clearly comment messages that are CEC 2.0 specific as such. Also rename references to HDMI 2.0 to CEC 2.0. The <Request/Report Current Latency> messages were marked as CEC 2.0 only. That is wrong, these messages are explicitly allowed for any CEC version. Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org> Link: https://patch.msgid.link/098789ee233f777d5ad87a72f09a997373c98d25.1779115235.git.hverkuil+cisco@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Message-ID: <098789ee233f777d5ad87a72f09a997373c98d25.1779115235.git.hverkuil+cisco@kernel.org> |
||
|
Hans Verkuil
|
65efd1314d |
media: include/uapi/linux/cec*.h: add CEC LIP support
Add support for the new Latency Indication Protocol feature. This adds the opcodes and the wrapper functions. Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org> Link: https://patch.msgid.link/8dac7c99b7eab4fcc11d76d50dd08fb4448672f4.1779115235.git.hverkuil+cisco@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Message-ID: <8dac7c99b7eab4fcc11d76d50dd08fb4448672f4.1779115235.git.hverkuil+cisco@kernel.org> |
||
|
Arnd Bergmann
|
49ff66206e |
FSL SOC Changes for 7.1
Freescale QUICC Engine: - Add missing cleanup on device removal and switch to irq_domain_create_linear() in interrupt controller for IO Ports - Panic on ioremap() failure in qe_reset() Freescale Management Complex: - Move fsl-mc over to device MSI infrastructure - Wait for the MC firmware to complete its boot Freescale Hypervisor: - Fix header kernel-doc warnings -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTH/wu6mIr0ZW+Vui/dkHAmvKvPUwUCad8lggAKCRDdkHAmvKvP U3/HAQCNklj/7KSYApkif9zHTi3ITtY5YkunkfTVamnx+Ti6PgD+KE1yOnXtaumM gbrwGcjenjhz+nuFuRRWJ8kN/SQeAwI= =kIgf -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmoLKU8ACgkQmmx57+YA GNm42A//bz/gpNKsJYtcA2NNVCjC5ysFBu8e7KlHAO4zJ1OJZkRglDB6Rb3E6+oR oSd4G4erumrcpGoF7szkgZDKmXul6tUi2Gov2jkrG3cNUG24KA5wUj59bq9G2Bsb b8VZa+J+YzBEcJUAikWJuaMKU0KeH/N15284qREoIoXQFk+A5YM21N4PR8vwS6bC i5rdAsmRXJwtvDWW96opUyfvVUEe+1fqniOGhRtFDPMN3wAmItd9/uFYsKxg5L6r 2cNw0q9zdHG6RPNN6f3S48BtDmzGCGLwo+O8v0P1RDuC6bU7UVXhmKVRyUMmqP9Z fOTFXqV22V6iseVzIb3PCw4jQ+YVf1ROkJBNKGgDvpQ6Q3MKe8ONbR3DF8vjNzcL vOmPIVuCQalxvdaKRg508p4Vj4dyKQz9EdGQ7oHPbqANycu/Jdlfoumg3o2IPmf6 7dI9dYeG4/egG522//ynduHPvwJU9U4oXfB64dlDv4cTjLDsabFajfLTdy7ElmXH gSDaBCc9JmZ6/ESNYmrsuXBSWeuxuH9ZB+9Ztfymt/nqnqi3kl0CPqsD1NNACneB JSczPDhl8Cu9yGYMc4kTcZNRE7B69HAn9MGbe7Jv5yOfWHo0mRoBXVz7UdakY9HU GhrdpmqCbiY6TjeTjLVXmVvJQZn+stFuP4ce5FmxxU+xTZ8Yofo= =2Tv8 -----END PGP SIGNATURE----- Merge tag 'soc_fsl-7.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux into soc/drivers FSL SOC Changes for 7.1 Freescale QUICC Engine: - Add missing cleanup on device removal and switch to irq_domain_create_linear() in interrupt controller for IO Ports - Panic on ioremap() failure in qe_reset() Freescale Management Complex: - Move fsl-mc over to device MSI infrastructure - Wait for the MC firmware to complete its boot Freescale Hypervisor: - Fix header kernel-doc warnings * tag 'soc_fsl-7.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux: bus: fsl-mc: wait for the MC firmware to complete its boot soc: fsl: qe: panic on ioremap() failure in qe_reset() soc: fsl: qe_ports_ic: switch to irq_domain_create_linear() soc: fsl: qe_ports_ic: Add missing cleanup on device removal virt: fsl_hypervisor: fix header kernel-doc warnings platform-msi: Remove stale comment fsl-mc: Remove legacy MSI implementation fsl-mc: Switch over to per-device platform MSI irqchip/gic-v3-its: Add fsl_mc device plumbing to the msi-parent handling fsl-mc: Add minimal infrastructure to use platform MSI fsl-mc: Remove MSI domain propagation to sub-devices Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Chuck Lever
|
45e57cfb7b
|
fs: Clarify FS_CASEFOLD_FL semantics in UAPI header
The existing one-liner "Folder is case insensitive" leaves the impression that FS_CASEFOLD_FL is reserved for directories. That impression is wrong: filesystems that derive case-insensitivity from mount or volume state report the bit on non-directory inodes via i_op->fileattr_get, so userspace inspecting FS_IOC_GETFLAGS can see it on any inode type. Replace the one-liner with a block comment that names directories as the typical case, records that non-directory inodes may also report the bit, and notes FS_XFLAG_CASEFOLD as the read-only companion exposed through FS_IOC_FSGETXATTR. Reported-by: sashiko-bot <sashiko-bot@kernel.org> Closes: https://sashiko.dev/#/patchset/20260507-case-sensitivity-v14-0-e62cc8200435@oracle.com?part=3 Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Link: https://patch.msgid.link/20260515153515.362266-5-cel@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Dave Airlie
|
15342d4aeb |
drm-misc-next for v7.2-rc1:
UAPI Changes: - Update fourcc descriptions of BG(R) floating formats. - Add deferred mapping support to virtio. Cross-subsystem Changes: - Update lontium lt9211 bindings. Core Changes: - Bugfixes and cleanups to pagemap, dp/mst. - Add lockdep annotations to gpu buddy manager. - Updates to drm/dp for PR + VRR. - Improve documentation's table of contents. - Bump fpfn and lpfn in ttm to 64-bits. Driver Changes: - Assorted bugfixes, cleanups and updates to panthor, nouveau, qaic, hisilicon. - Add support for CMN N116BCN-EA1, CMN N140HCA-EEK, IVO M140NWFQ R5, IVO R140NWFW R0, BOE NT140*, BOE NV133FHM-N4F, AUO B140*, AUO B133HAN06.6 and AUO B116XTN02.3 eDP panels. - More implementation of AIE4 in amdxdna. - Update panels to use refcounts instead of devm_kzalloc to make drm_panel_init static. - Add support for the RCade Display Adapter to gud. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAmoFw/UACgkQ/lWMcqZw E8PPeRAAoITX1HZEs+FWz+YdJDVxSA+YI54z4uYXp3MsQsZWjytYBhp8vBlwTj64 UAmvz3NXt0taqrirRQoX2Ueoxuf2uUBn/uqlB7+UGeCMpDEkCbnMiRUPwgpf8N9l 7XPlSThMacVaWIHG1ktz22VN4antmwkf0eonByeGyxg+zGRXf5vSwRm0UFe/zLeI g/hljcMRRdZ7jrGQOyFj/MtkqpNm6JPLG0gk6u/vm3e4zs36VpFUDjPfznrmIALQ KVSDoYFBYFjE9TMrm2A7lioLkoU7agbByJtxcGAu/sEKBWNk+lQmQqCMFh8jsYjG YbQQQKbo8hhIHE7/Txj6ZVMk4MthQVadIQz2HXtERbMzAWbmoRLSTCCbhUcw4Oat oEJn90jI7PfiQqQ861YPniI83Il1j6k7vGA3d1rtZitpY7W3K+8jzXQAhVvJ4+1i E977NT9PF42kUHyePqVbrtGyFAYuGcRG0gTQQdqmB8NVQVulO/s2nU1StbuJ1gP3 6Z+9MMseQCVtDFAkkwVNMH9t1MB/rq7P3PjoYQehCJaFjecUFz7pWXSHbIZbSqWV QiQL7zr1I9KDras1Cq4SSZTS3YfGT5cR6fEcR3RdFXGkolMovw3/iiP2BtwP+ALR SDYefjejaSwUGrU0FLZ8ejFAil96zNM8zXcAU3d+gnXtysOh1lA= =UqYc -----END PGP SIGNATURE----- Merge tag 'drm-misc-next-2026-05-14' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v7.2-rc1: UAPI Changes: - Update fourcc descriptions of BG(R) floating formats. - Add deferred mapping support to virtio. Cross-subsystem Changes: - Update lontium lt9211 bindings. Core Changes: - Bugfixes and cleanups to pagemap, dp/mst. - Add lockdep annotations to gpu buddy manager. - Updates to drm/dp for PR + VRR. - Improve documentation's table of contents. - Bump fpfn and lpfn in ttm to 64-bits. Driver Changes: - Assorted bugfixes, cleanups and updates to panthor, nouveau, qaic, hisilicon. - Add support for CMN N116BCN-EA1, CMN N140HCA-EEK, IVO M140NWFQ R5, IVO R140NWFW R0, BOE NT140*, BOE NV133FHM-N4F, AUO B140*, AUO B133HAN06.6 and AUO B116XTN02.3 eDP panels. - More implementation of AIE4 in amdxdna. - Update panels to use refcounts instead of devm_kzalloc to make drm_panel_init static. - Add support for the RCade Display Adapter to gud. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patch.msgid.link/98788814-e462-4950-bb2a-ea493c30d0c0@linux.intel.com |
||
|
Jakub Kicinski
|
878492af7d |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-7.1-rc4). No conflicts, or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Shouvik Kar
|
899bea8248 |
io_uring/net: allow filtering on IORING_OP_CONNECT
This adds custom filtering for IORING_OP_CONNECT, where the target family is always exposed, and (for AF_INET / AF_INET6) port and address are exposed. port and v4_addr are in network byte order so filter authors can compare against on-wire constants. Skip population unless addr_len covers the populated fields, to avoid leaking stale io_async_msghdr data on short connects. Signed-off-by: Shouvik Kar <auxcorelabs@gmail.com> Link: https://patch.msgid.link/20260512110242.26219-1-auxcorelabs@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Danielle Ratson
|
0c32db0761 |
bridge: uapi: Add neigh_forward_grat netlink attributes
Add netlink attributes for controlling gratuitous ARP and unsolicited NA forwarding when neighbor suppression is enabled. Add IFLA_BRPORT_NEIGH_FORWARD_GRAT for port-level control and BRIDGE_VLANDB_ENTRY_NEIGH_FORWARD_GRAT for per-VLAN control. The new attributes provide independent control of gratuitous ARP and unsolicited NA packets. Operators can enable forwarding for those packets for fast mobility across VTEPs while keeping general neighbor suppression active. Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Danielle Ratson <danieller@nvidia.com> Link: https://patch.msgid.link/20260511065936.4173106-2-danieller@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Stephen Hemminger
|
a2f6ed7b48 |
net/sched: netem: add per-impairment extended statistics
Add 64-bit counters for each impairment netem applies (delay, loss, ECN marking, corruption, duplication, reordering) and for skb allocation failures during enqueue. Exposed through TCA_STATS_APP as struct tc_netem_xstats. Counters increment when an impairment is occurs, independent of later events that may mask its on-wire effect. Added allocation_errors (similar to sch_fq) to account for when impairment could not be applied due to memory pressure, etc. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Link: https://patch.msgid.link/20260509171123.307549-6-stephen@networkplumber.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Dmitry Osipenko
|
4c26e16294 |
drm/virtio: Extend blob UAPI with deferred-mapping hinting
If userspace never maps GEM object, then BO wastes hostmem space because VirtIO-GPU driver maps VRAM BO at the BO's creating time. Make mappings on-demand by adding new RESOURCE_CREATE_BLOB IOCTL/UAPI hinting flag telling that host mapping should be deferred until first mapping is made when the flag is set by userspace. Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Link: https://patch.msgid.link/20260501000043.2483678-1-dmitry.osipenko@collabora.com |
||
|
Christoph Böhmwalder
|
d5607f1faf |
drbd: clean up UAPI headers
Commit b1798910fc7f ("drbd: move UAPI headers to include/uapi/linux/")
broke compilation on targets without a hosted libc:
./usr/include/linux/drbd.h:18:10: fatal error: sys/types.h: No such
file or directory
The underlying issue is that there were some constructs left over in
those headers that don't belong in uapi.
Drop the __KERNEL__-gated split in drbd.h. The !__KERNEL__ branch pulls
in <sys/types.h>, <sys/wait.h> and <limits.h> for symbols that the
header does not actually reference; they were carried over from when
this lived in include/linux/.
Replace <asm/types.h> and the entire #ifdef block with the standard
UAPI combo <linux/types.h> + <asm/byteorder.h>, which provides
__u32/__u64/__s32 and __{LITTLE,BIG}_ENDIAN_BITFIELD in both kernel
and userspace contexts.
drbd_limits.h references some enum values and the DRBD_PROT_C define
from drbd.h, but does not include it. Add the missing include while
we're here.
Drop the unprefixed DEBUG_RANGE_CHECK from drbd_limits.h. It has no
in-kernel users and pollutes the userspace namespace.
Switch the drbd.h and drbd_limits.h include guards to the _UAPI_LINUX_*
convention already used by drbd_genl.h.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202605101346.V2wwJqv1-lkp@intel.com/
Fixes: b1798910fc7f ("drbd: move UAPI headers to include/uapi/linux/")
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://patch.msgid.link/20260513110343.3170338-1-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
||
|
Eric Dumazet
|
b588019e85 |
rtnetlink: add RTEXT_FILTER_NAME_ONLY support
iproute2 can spend considerable amount of time in ll_init_map() or ll_link_get() to dump verbose netdev attributes, contributing to RTNL pressure. Add RTEXT_FILTER_NAME_ONLY new flag so that rtnl_fill_ifinfo() limits its output to: - struct nlmsghdr - IFLA_IFNAME - IFLA_PROP_LIST (alternate names) We can later avoid using RTNL when RTEXT_FILTER_NAME_ONLY is requested, as none of these attributes need RTNL. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20260511070244.971028-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Leon Hwang
|
f28771c069 |
bpf: Extend BPF syscall with common attributes support
Add generic BPF syscall support for passing common attributes.
The initial set of common attributes includes:
1. 'log_buf': User-provided buffer for storing logs.
2. 'log_size': Size of the log buffer.
3. 'log_level': Log verbosity level.
4. 'log_true_size': Actual log size reported by kernel.
The common-attribute pointer and its size are passed as the 4th and 5th
syscall arguments. A new command bit, 'BPF_COMMON_ATTRS' ('1 << 16'),
indicates that common attributes are supplied.
This commit adds syscall and uapi plumbing. Command-specific handling is
added in follow-up patches.
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260512153157.28382-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Perry Yuan
|
c62c076d2d |
drm/amdkfd: bump KFD ioctl minor version to 1.23
Bump `KFD_IOCTL_MINOR_VERSION` from 22 to 23 and document version 1.23 in `kfd_ioctl.h` so userspace can detect profiler ioctl support. Signed-off-by: Perry Yuan <perry.yuan@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
||
|
Perry Yuan
|
dd61e27535 |
drm/amdkfd: Add PTL control IOCTL Option and unify refcount logic
Introduce a new IOCTL option to allow userspace explicit control over the Peak Tops Limiter (PTL) state for profiling Link: https://github.com/ROCm/rocm-systems/tree/develop/projects/rocprofiler-sdk Signed-off-by: Perry Yuan <perry.yuan@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
||
|
Benjamin Welton
|
a789761de3 |
amd/amdkfd: Add kfd_ioctl_profiler to contain profiler kernel driver changes
kfd_ioctl_profiler takes a similar approach to that of
kfd_ioctl_dbg_trap (which contains debugger related IOCTL
services) where kfd_ioctl_profiler will contain all profiler
related IOCTL services. The IOCTL is designed to be expanded
as needed to support additional profiler functionality.
The current functionality of the IOCTL is to allow for profilers
which need PMC counters from GPU devices to both signal to other
profilers that may be on the system that the device has active PMC
profiling taking place on it (multiple PMC profilers on the same
device can result in corrupted counter data) and to setup the device
to allow for the collection of SQ PMC data on all queues on the device.
For PMC data for the SQ block (such as SQ_WAVES) to be available
to a profiler, mmPERFCOUNT_ENABLE must be set on the queues. When
profiling a single process, the profiler can inject PM4 packets into
each queue to turn on PERFCOUNT_ENABLE. When profiling system wide,
the profiler does not have this option and must have a way to turn
on profiling for queues in which it cannot inject packets into directly.
Accomplishing this requires a few steps:
1. Checking if the user has the necessary permissions to profile system
wide on the device. This check uses the same check that linux perf
uses to determine if a user has the necessary permissions to profile
at this scope (primarily if the process has CAP_SYS_PERFMON or is root).
2. Locking the device for profiling. This is done by setting a lock bit
on the device struct and storing the process that locked the device.
3. Iterating all queues on the device and issuing an MQD Update to enable
perfcounting on the queues.
4. Actions to cleanup if the process exits or releases the lock.
The IOCTL also contains a link to the existing PC Sampling IOCTL as well.
This is per a suggestion that we should potentially remove the PC Sampling
IOCTL to have it be a part of the profiler IOCTL. This is a future change.
In addition, we do expect to expand the profiler IOCTL to include
additional profiler functionality in the future (which necessitates the
use of a version number).
v2: sqaush in proper IOCTL number
Proposed userpace support:
|
||
|
Ethan Nelson-Moore
|
61848e9799 |
tty: synclink_gt: remove broken driver
The synclink_gt driver was marked as broken in commit
|
||
|
Chuck Lever
|
3035e44541
|
fs: Add case sensitivity flags to file_kattr
Enable upper layers such as NFSD to retrieve case sensitivity information from file systems by adding FS_XFLAG_CASEFOLD and FS_XFLAG_CASENONPRESERVING flags. Filesystems report case-insensitive or case-nonpreserving behavior by setting these flags directly in fa->fsx_xflags. The default (flags unset) indicates POSIX semantics: case-sensitive and case-preserving. Both flags are added to FS_XFLAG_RDONLY_MASK so FS_IOC_FSSETXATTR silently strips them, keeping the new xflags strictly a reporting interface. Callers that want to toggle casefolding continue to use FS_IOC_SETFLAGS with FS_CASEFOLD_FL, the established UAPI on filesystems that support the operation (ext4 and f2fs on empty directories). Case sensitivity information is exported to userspace via the fa_xflags field in the FS_IOC_FSGETXATTR ioctl and file_getattr() system call. Reviewed-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Roland Mainz <roland.mainz@nrubsig.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Link: https://patch.msgid.link/20260507-case-sensitivity-v14-2-e62cc8200435@oracle.com Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Alexei Starovoitov
|
7e033543a2 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf 7.1-rc3
Cross-merge BPF and other fixes after downstream PR. Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Robert Ancell
|
19d584a634 |
drm/fourcc: Fix descriptions of 32b float formats
The channels were described in reverse format, i.e. RGBA instead of ABGR Signed-off-by: Robert Ancell <robert.ancell@canonical.com> CC: Rob Clark <robin.clark@oss.qualcomm.com> Reviewed-by: Simon Ser <contact@emersion.fr> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20260503235327.92428-1-robert.ancell@canonical.com |
||
|
Linus Torvalds
|
7f00232152 |
Miscellaneous scheduler fixes:
- Fix spurious failures in rseq self-tests (Mark Brown)
- Fix rseq rseq::cpu_id_start ABI regression due to
TCMalloc's creative use of the supposedly read-only field.
The fix is to introduce a new ABI variant based on
a new (larger) rseq area registration size, to keep
the TCMalloc use of rseq backwards compatible on new kernels.
(Thomas Gleixner)
- Fix wakeup_preempt_fair() for not waking up task (Vincent Guittot)
- Fix s64 mult overflow in vruntime_eligible() (Zhan Xusheng)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=2QJp
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix spurious failures in rseq self-tests (Mark Brown)
- Fix rseq rseq::cpu_id_start ABI regression due to TCMalloc's creative
use of the supposedly read-only field
The fix is to introduce a new ABI variant based on a new (larger)
rseq area registration size, to keep the TCMalloc use of rseq
backwards compatible on new kernels (Thomas Gleixner)
- Fix wakeup_preempt_fair() for not waking up task (Vincent Guittot)
- Fix s64 mult overflow in vruntime_eligible() (Zhan Xusheng)
* tag 'sched-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix wakeup_preempt_fair() for not waking up task
sched/fair: Fix overflow in vruntime_eligible()
selftests/rseq: Expand for optimized RSEQ ABI v2
rseq: Reenable performance optimizations conditionally
rseq: Implement read only ABI enforcement for optimized RSEQ V2 mode
selftests/rseq: Validate legacy behavior
selftests/rseq: Make registration flexible for legacy and optimized mode
selftests/rseq: Skip tests if time slice extensions are not available
rseq: Revert to historical performance killing behaviour
rseq: Don't advertise time slice extensions if disabled
rseq: Protect rseq_reset() against interrupts
rseq: Set rseq::cpu_id_start to 0 on unregistration
selftests/rseq: Don't run tests with runner scripts outside of the scripts
|
||
|
Christoph Böhmwalder
|
8098eeb693 |
drbd: replace genl_magic with explicit netlink serialization
Replace the genl_magic multi-include macro system with explicit serialization and parsing. The *_gen files were initially produced from a YNL spec via a customized ynl-gen-c, but the DRBD netlink family is effectively frozen, so the generator is kept unmodified. All new functionality will land in a separate, properly-designed family. Carry the resulting code as ordinary in-tree source rather than landing the spec and generator changes that produced it. The bulk of the changes are mechanical renames to fit the YNL naming conventions: - Handler functions: drbd_adm_* -> drbd_nl_*_doit/dumpit - GENL_MAGIC_VERSION -> DRBD_FAMILY_VERSION - GENL_MAGIC_FAMILY_HDRSZ -> sizeof(struct drbd_genlmsghdr) - drbd_genl_family -> drbd_nl_family - Attribute IDs: T_* -> DRBD_A_* Remove the nested_attr_tb static global buffer and move to a per-call allocation approach: each deserialization manages its own nested attribute table. This will be needed anyway when we eventually move to parallel_ops, and it's actually simpler this way, so make the move now. Replace the functionality of the "sensitive" flag: this was only used by a single field (shared_secret); open-code redaction logic for that locally. Also replace the "invariant" flag: this only had a couple of users, and those basically never change. Hard code the check directly inline. The genl_family struct itself is defined manually in drbd_nl.c. Also replace a couple of drbd-specific wrappers (nla_put_u64_0pad, drbd_nla_find_nested) with standard kernel functions while we're at it. Finally, completely remove the genl_magic system; DRBD was its only user. Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20260506124541.1951772-3-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Christoph Böhmwalder
|
a54f499838 |
drbd: move UAPI headers to include/uapi/linux/
drbd.h and drbd_limits.h contain only type definitions, enums, and constants shared between kernel and userspace. These should be part of UAPI. Split the genl_api header into two: the genlmsghdr and the enums are UAPI, the rest stays there for now (it will be removed by one of the next commits in this series). drbd_config.h is clearly DRBD-internal, so move it there. Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20260506124541.1951772-2-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Dave Airlie
|
f96538285c |
drm-misc-next for v7.2-rc1:
UAPI Changes: - Support medium/low power modes in amdxdna. - Support limiting frequency in ivpu. - Document license for drm core uAPI headers. - Add the following DRM formats: P230, Y7, XYYY2101010, T430, XVUY210101010. Cross-subsystem Changes: - Add and improve dt-bindings. - Remove unused dma-fence-array's signal_on_any support. Core Changes: - Do not call drop_master on file close if not master. - Convert drm-bridge and drm/atomic to use drm_printf_indent. - Remove the extra call to drm_connector_attach_encoder after drm_bridge_connector_init(). - Assorted docbook updates. Driver Changes: - Bugfixes in amdxdna, ivpu, mipi-dsi, imagination, nouveau, panthor, bridge/analogix_dp, ipv3, lontium-lt8912b, verisilicon, tve200, etnaviv, panel/focaltech-ota7290b, panel/jadard-jd9365da-h3, bridge/ite-it6263, renesas, xlnx, bridge/cdns-dsi, gma500, bridge/microchip-lvds, mgag200. - Add support for MStar TSUMU88ADT3-LF-1 bridge. - Add support for WaveShare 7, Novatek NT35532, Startek KD070HDFLD092, ChipWealth CH13726A AMOLED, Team Source Display TST070WSNE-196C, Displaytech DT050BTFT-PTS panels. - Improve mipi-dsi shutdown and convert a panasonic panel to use the mipi-dsi wrappers. - Allowing dumping vbios over debugfs in GSP-RM mode. - Update maintainers for ivpu, add reviewer for drm-bridge code and update maintainers for LT8912B DRM HDMI bridge. - Add test pattern support to bridge/ti-sn65dsi83. - Convert vmwgfx to vblank timers. - Add power management to sysfb drm drivers to allow suspend/resume. - Support the aforementioned new drm formats in xlnx/qynqmp. - Fix panel Kconfig dependencies. - Add carveout support for debugging and bringup to amxdna. - Add support for long command tx via videobuffer in bridge/tc358768. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAmn8fBIACgkQ/lWMcqZw E8OlSw/+JbotgRTp5I3EwGtOiUoEZF1n20vkwZ5+olbEhP5wVft+Kf5MbD2/Hmja GEL/3lxXgbvA1QOXFsED+q5UlKwtmEb3jTj+K83CXZ/YHT8Fk+lFCpNR3dGWWpal 3CAk+Xe2MYdhBe4Sce04rKYfI7D7R2p1xrvfGDO/4Z1WicI1P2BhgV+6K2buhNJ3 2FOFRLTQaBdUa/52PgP45lEvQveI5E2UHyjOk2dDEU/uE6JeMHOQzk4d/1VFY+6s hjgC5Mzw1eRZeX3LgSsSaCZ4/vKOXUg950oMAbmGeucyPoIm2+dOt6k/bRMTolJt wXDGmh69dJliHm5801riqaEBWwMV0JEt3WBcqAiNycIAitsjf9jACkWMfoXz03At 34qTWxWReXaQXL32ooFD2ZIZhiBSNNbZu50P5xhOAcE2F0siPH8dLSSaamSEKX5P T+gklhoXnMljgBz/wRKW5oUC1EQrylsc2C3/vvXHopYDPFhHZ77v1m33x5mXu8jn XvUPjMIIx62dBueGtYcODQEOhfvweeg+XWUJ0uJ1SDfqtTDjkw2oEnNqEbYOwaIF BR8YjQn3QI5FAFt9VbilQ9lL7XBGgjT4kV8iX4qGedSwKLAzu/b+P3FyTtvNnY71 vYldKKmhVogzHO97JzVvWq3l6H6dush1REgprGCDAISUesk55g4= =kWIv -----END PGP SIGNATURE----- Merge tag 'drm-misc-next-2026-05-07' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v7.2-rc1: UAPI Changes: - Support medium/low power modes in amdxdna. - Support limiting frequency in ivpu. - Document license for drm core uAPI headers. - Add the following DRM formats: P230, Y7, XYYY2101010, T430, XVUY210101010. Cross-subsystem Changes: - Add and improve dt-bindings. - Remove unused dma-fence-array's signal_on_any support. Core Changes: - Do not call drop_master on file close if not master. - Convert drm-bridge and drm/atomic to use drm_printf_indent. - Remove the extra call to drm_connector_attach_encoder after drm_bridge_connector_init(). - Assorted docbook updates. Driver Changes: - Bugfixes in amdxdna, ivpu, mipi-dsi, imagination, nouveau, panthor, bridge/analogix_dp, ipv3, lontium-lt8912b, verisilicon, tve200, etnaviv, panel/focaltech-ota7290b, panel/jadard-jd9365da-h3, bridge/ite-it6263, renesas, xlnx, bridge/cdns-dsi, gma500, bridge/microchip-lvds, mgag200. - Add support for MStar TSUMU88ADT3-LF-1 bridge. - Add support for WaveShare 7, Novatek NT35532, Startek KD070HDFLD092, ChipWealth CH13726A AMOLED, Team Source Display TST070WSNE-196C, Displaytech DT050BTFT-PTS panels. - Improve mipi-dsi shutdown and convert a panasonic panel to use the mipi-dsi wrappers. - Allowing dumping vbios over debugfs in GSP-RM mode. - Update maintainers for ivpu, add reviewer for drm-bridge code and update maintainers for LT8912B DRM HDMI bridge. - Add test pattern support to bridge/ti-sn65dsi83. - Convert vmwgfx to vblank timers. - Add power management to sysfb drm drivers to allow suspend/resume. - Support the aforementioned new drm formats in xlnx/qynqmp. - Fix panel Kconfig dependencies. - Add carveout support for debugging and bringup to amxdna. - Add support for long command tx via videobuffer in bridge/tc358768. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patch.msgid.link/f73f342d-6efb-416d-81b0-1716bdd98d5f@linux.intel.com |
||
|
David Zhang
|
91f4da826c |
accel/amdxdna: Add command doorbell and wait support
Expose the command doorbell register to userspace on a per-hardware context basis, enabling applications to notify the firmware of pending commands via doorbell writes. Introduce DRM_IOCTL_AMDXDNA_WAIT_CMD to allow userspace to wait for completion of individual commands. Co-developed-by: Hayden Laccabue <Hayden.Laccabue@amd.com> Signed-off-by: Hayden Laccabue <Hayden.Laccabue@amd.com> Signed-off-by: David Zhang <yidong.zhang@amd.com> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://patch.msgid.link/20260505160936.3917732-5-lizhi.hou@amd.com |
||
|
David Zhang
|
193612791e |
accel/amdxdna: Add AIE4 VF hardware context create and destroy
Implement hardware context creation and destruction for AIE4 VF devices. Co-developed-by: Hayden Laccabue <Hayden.Laccabue@amd.com> Signed-off-by: Hayden Laccabue <Hayden.Laccabue@amd.com> Signed-off-by: David Zhang <yidong.zhang@amd.com> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://patch.msgid.link/20260505160936.3917732-4-lizhi.hou@amd.com |
||
|
David Zhang
|
7b1a245b18 |
accel/amdxdna: Add initial support for AIE4 VF
Add basic device initialization support for AIE4 Virtual Functions (PCI device IDs 0x17F3 and 0x1B0C). Co-developed-by: Hayden Laccabue <Hayden.Laccabue@amd.com> Signed-off-by: Hayden Laccabue <Hayden.Laccabue@amd.com> Signed-off-by: David Zhang <yidong.zhang@amd.com> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://patch.msgid.link/20260505160936.3917732-2-lizhi.hou@amd.com |
||
|
Jakub Kicinski
|
6a4c4656b0 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-7.1-rc3). Conflicts: net/ipv4/igmp.c |
||
|
Maxime Ripard
|
9865948b87 |
Merge drm/drm-next into drm-misc-next
Merge drm-next to bring the drm_atomic_state renaming patch. Signed-off-by: Maxime Ripard <mripard@kernel.org> |
||
|
Jakub Kicinski
|
2281958e60 |
Lots of new content in cfg80211/mac80211, notably
- more NAN work, mostly complete now (also hwsim)
- more UHR work (e.g. non-primary channel access),
this will continue for a while
- FTM ranging APIs
-----BEGIN PGP SIGNATURE-----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=gvrF
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Lots of new content in cfg80211/mac80211, notably
- more NAN work, mostly complete now (also hwsim)
- more UHR work (e.g. non-primary channel access),
this will continue for a while
- FTM ranging APIs
* tag 'wireless-next-2026-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (70 commits)
wifi: mac80211: explicitly disable FTM responder on AP stop
wifi: iwlwifi: don't blindly start the responder upon BSS_CHANGED_FTM_RESPONDER
wifi: mac80211_hwsim: claim HT STBC capability
wifi: mac80211_hwsim: enable NAN_DATA interface simulation support
wifi: mac80211_hwsim: Support Tx of multicast data on NAN
wifi: mac80211_hwsim: Do not declare support for NDPE
wifi: mac80211_hwsim: Declare support for secure NAN
wifi: mac80211_hwsim: add NAN data path TX/RX support
wifi: mac80211_hwsim: set HAS_RATE_CONTROL when using NAN
wifi: mac80211_hwsim: implement NAN schedule callbacks
wifi: mac80211_hwsim: add NAN PHY capabilities
wifi: mac80211_hwsim: add NAN_DATA interface limits
wifi: mac80211_hwsim: implement NAN synchronization
wifi: mac80211_hwsim: protect tsf_offset using a spinlock
wifi: mac80211_hwsim: only RX on NAN when active on a slot
wifi: mac80211_hwsim: select NAN TX channel based on current TSF
wifi: mac80211_hwsim: limit TX of frames to the NAN DW
wifi: cfg80211: don't allow NAN DATA on multi radio devices
wifi: mac80211: check AP using NPCA has NPCA capability
wifi: mac80211: don't parse full UHR operation from beacons
...
====================
Link: https://patch.msgid.link/20260506111147.224296-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Dave Airlie
|
5077f45ecd |
drm-misc-next for v7.1-rc1:
UAPI Changes: - Expose per-client BO memory usage via fdinfo in amdxdna. (Hou) - Change the default priority of drm scheduler to fair. (Tvrtko) Cross-subsystem Changes: - Revert hugetlb support in udmabuf. (Gunthorpe) - Fix error in udmabuf with CONFIG_DMA_API_DEBUG(/ _SG). (Gavrilov) - Add Docbook for DRM_IOCTL_SYNCOBJ_EVENTFD, (Ser) clarify drm_bridge_get/put. (Tvrtko) - Change signature of drm_connector_attach_hdr_output_metadata_property. (Canal) - Use IOVA allocations in gpusvm and pagemap APIs. (Brost) - Fix tracepoints vs dma-fence lifetime. (Tvrtko) - Convert st-dma*.c tests to use kunit. (Gunthorpe) Core Changes: - Deduplicate counter and timestamp retrieval in vblank code. (Ville) - Parse AMD VSDB v3 in CTA extension blocks, and use it in amdgpu. (Chen) - Prevent bridge and encoder chain changes at inopportune times. (Ceresoli) - Map the run queue 1:1 to the drm scheduler. (Tvrtko) Driver Changes: - Assorted bugfixes and (documentation) updates to rockchip, bridge/synopsis, panfrost, tidss, accel/qaic, tilcdc, vc4, ast, imagination, panthor, renesas, accel/amdxdna, msxfb, bridge/imx8mp, nouveau. bridge/analogix_dp, bridge/exynos_dp, omap. - Add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1, panels. - Add support for a lot of waveshare panels (Baryshkov) - Support for AIE4 devices in accel/wamdxdna. (Zhang) - Enable support for GEM shrinking in panthor. (Goel/Brezillon) - Runtime Power Management is added to v3d. (Canal) - Allow panel probing and use the panel bridge helper in analogix_dp. (Ding) - Support XRGB1555 and C8 in mgag and XRGB1555 in ast. (Zimmermann) -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAmnmEIAACgkQ/lWMcqZw E8PHNQ//fkMfZZwH9YjGZHUQKEiGk0Gw5GEheKogdYYm7tYMI+ljDC5gORfljuoa /un9meYTjYOPUprxWvAHLTvkX9ZwGpoJKrM5yswY+GyD0a2fE9Y41nDfAXsOPnCM jhRaM3va4Hr6Fdy9Fl/u7um4gRouGJYaENaa3c4TDRfyue0T0jMldxoIqTQzodRd mRFs9wRdfw7Lq8HcSsTMBa2sbt+jma1FM+3jIBha9s+3blPYT7+zuhI5I6tmcUnL bPOniB3+pxEcxZ7o+gK9xvhaP/b3POCL7ptfx+U4tULHh7yS65bi0BUAuLQwP7rJ jh4fnXF+s22lZzj8s+x5uwr4+jYYxlUc2l9IENkjAEBUehftkeqdIVJAS5Nig7QE zo9L87bECUXgDcgRHHt/CnYDaW9VF1IC+BoE2EidFA5wDeGfYkemrV4zt3jQD9Wx 9j/13M+uInB7vkVAMXuuKhGobO+ccM5S1GMhfwfQG08u71s1fqWG2Fr4H9OmhoAM +8JipSR2EcEx6h/42aegch5YTzPNnZZMYbvrjr1QYU+iAJ0deniV96MqtksCb8vM /XN2CToqf5eusRFPjgneVCU4aouHnH0bxmqI8Leqfh7TOaiROZHLnJvdv3NTsdTb y0dKlP4k09dqLkcKfY3NKO0bWs1kGXjETp1XYgWUPM/M8pTJ0Rg= =T0tH -----END PGP SIGNATURE----- Merge tag 'drm-misc-next-2026-04-20' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v7.1-rc1: UAPI Changes: - Expose per-client BO memory usage via fdinfo in amdxdna. (Hou) - Change the default priority of drm scheduler to fair. (Tvrtko) Cross-subsystem Changes: - Revert hugetlb support in udmabuf. (Gunthorpe) - Fix error in udmabuf with CONFIG_DMA_API_DEBUG(/ _SG). (Gavrilov) - Add Docbook for DRM_IOCTL_SYNCOBJ_EVENTFD, (Ser) clarify drm_bridge_get/put. (Tvrtko) - Change signature of drm_connector_attach_hdr_output_metadata_property. (Canal) - Use IOVA allocations in gpusvm and pagemap APIs. (Brost) - Fix tracepoints vs dma-fence lifetime. (Tvrtko) - Convert st-dma*.c tests to use kunit. (Gunthorpe) Core Changes: - Deduplicate counter and timestamp retrieval in vblank code. (Ville) - Parse AMD VSDB v3 in CTA extension blocks, and use it in amdgpu. (Chen) - Prevent bridge and encoder chain changes at inopportune times. (Ceresoli) - Map the run queue 1:1 to the drm scheduler. (Tvrtko) Driver Changes: - Assorted bugfixes and (documentation) updates to rockchip, bridge/synopsis, panfrost, tidss, accel/qaic, tilcdc, vc4, ast, imagination, panthor, renesas, accel/amdxdna, msxfb, bridge/imx8mp, nouveau. bridge/analogix_dp, bridge/exynos_dp, omap. - Add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1, panels. - Add support for a lot of waveshare panels (Baryshkov) - Support for AIE4 devices in accel/wamdxdna. (Zhang) - Enable support for GEM shrinking in panthor. (Goel/Brezillon) - Runtime Power Management is added to v3d. (Canal) - Allow panel probing and use the panel bridge helper in analogix_dp. (Ding) - Support XRGB1555 and C8 in mgag and XRGB1555 in ast. (Zimmermann) From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patch.msgid.link/bf31b1a1-951b-4f60-b226-22e8c083697d@linux.intel.com Signed-off-by: Dave Airlie <airlied@redhat.com> |
||
|
Johannes Berg
|
1cf1d06e95 |
wifi: cfg80211: allow representing NPCA in chandef
Add the necessary fields to the chandef data structure to represent NPCA (the NPCA primary channel and NPCA punctured/disabled subchannels bitmap), and the code to check these for validity, compatibility, as well as allowing it to be passed for AP mode for capable devices. Compatibility is assumed to only be the case when it's actually identical, enabling later management of this in channel contexts in mac80211 for multiple APs, but requiring userspace to set up the identical chandef on all AP interfaces that share a channel (and BSS color.) Link: https://patch.msgid.link/20260428112708.46f3872aeb35.I85888dab88a6659ba52db4b3318979ca5bcfc0c8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Johannes Berg
|
fb19b4d67d |
wifi: cfg80211: allow devices to advertise extended MLD capa/ops
For UHR, multi-link power-management capability lives there, and so it's needed that hostapd knows what to advertise, and clients should have it shown to userspace for information. Repurpose the existing NL80211_ATTR_ASSOC_MLD_EXT_CAPA_OPS by renaming it to NL80211_ATTR_EXT_MLD_CAPA_AND_OPS (with a define for compatibility) and advertise the capabilities. We can also later use the value, if needed, to set per-station capabilities on STAs added to AP interfaces. Link: https://patch.msgid.link/20260428110915.e808e70feed6.I378a7c017bfc1ebb072fa8d5d1db2ac9b45596c9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Mike Marciniszyn (Meta)
|
ca283942e5 |
net: mdio: Add support for RSFEC Control register for PMA
Add the constants associated with RS-FEC configuration and status as well as the indicated separated bits for DEVS1 to convey a separated PMA. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Mike Marciniszyn (Meta) <mike.marciniszyn@gmail.com> Link: https://patch.msgid.link/20260430150802.3521-2-mike.marciniszyn@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Peddolla Harshavardhan Reddy
|
4bb6e58bc2 |
wifi: cfg80211: add LTF keyseed support for secure ranging
Currently there is no way to install an LTF key seed that can be used in non-trigger-based (NTB) and trigger-based (TB) FTM ranging to protect NDP frames. Without this, drivers cannot enable PHY-layer security for peer measurement sessions, leaving ranging measurements vulnerable to eavesdropping and manipulation. Introduce NL80211_KEY_LTF_SEED attribute and the dedicated extended feature flag NL80211_EXT_FEATURE_SET_KEY_LTF_SEED to allow drivers to advertise and install LTF key seeds via nl80211. The key seed must be configured beforehand to ensure the peer measurement session is secure. The driver must advertise both NL80211_EXT_FEATURE_SECURE_LTF and NL80211_EXT_FEATURE_SET_KEY_LTF_SEED for the key seed installation to be permitted. The LTF key seed is pairwise key material and must only be used with pairwise key type. Reject attempts to use it with other key types. Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com> Link: https://patch.msgid.link/20260420090856.2152905-13-peddolla.reddy@oss.qualcomm.com [fix policy coding style] Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Peddolla Harshavardhan Reddy
|
410aa47fd9 |
wifi: cfg80211: allow suppressing FTM result reporting for PD requests
Proximity detection often does not require detailed ranging measurements, yet userspace currently receives full FTM results for every request, causing unnecessary data transfer, host wakeups, and processing overhead. Add an optional control to suppress ranging result reporting for peer-to-peer PD requests. Introduce the NL80211_PMSR_FTM_REQ_ATTR_PD_SUPPRESS_RESULTS flag; when set with a PD request, the device may perform the measurements (e.g. when acting as RSTA) but must not report the measurement results to userspace. Validate that the flag is only accepted when request_type is set to NL80211_PMSR_FTM_REQ_TYPE_PD, reject otherwise. Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com> Link: https://patch.msgid.link/20260420090856.2152905-12-peddolla.reddy@oss.qualcomm.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Peddolla Harshavardhan Reddy
|
5733daa670 |
wifi: cfg80211: add PD-specific preamble and bandwidth capabilities
Devices may support different preamble and bandwidth configurations for proximity detection (PD) ranging versus standard ranging. Add separate pd_preambles and pd_bandwidths fields to cfg80211_pmsr_capabilities to allow drivers to advertise PD-specific capabilities. Expose these over nl80211 using new attributes NL80211_PMSR_FTM_CAPA_ATTR_PD_PREAMBLES and NL80211_PMSR_FTM_CAPA_ATTR_PD_BANDWIDTHS, advertised only when pd_support is set. For PD requests, validate bandwidth and preamble against pd_bandwidths and pd_preambles. For non-PD requests, validate against the existing bandwidths and preambles fields. Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com> Link: https://patch.msgid.link/20260420090856.2152905-11-peddolla.reddy@oss.qualcomm.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Peddolla Harshavardhan Reddy
|
99529edd28 |
wifi: cfg80211: add ingress/egress distance thresholds for FTM
Proximity detection applications need to receive measurement results only when devices cross specific distance boundaries to avoid unnecessary host wakeups and reduce power consumption. Introduce configurable distance-based reporting thresholds that drivers can use to implement selective result reporting. Add ingress and egress distance parameters allowing applications to specify when results should be reported as peers cross these boundaries. Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com> Link: https://patch.msgid.link/20260420090856.2152905-10-peddolla.reddy@oss.qualcomm.com [remove mm units from variables] Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Peddolla Harshavardhan Reddy
|
ea996c2c03 |
wifi: cfg80211: add role-based peer limits to FTM capabilities
Peer measurement capabilities currently advertise a single maximum peer count regardless of device role. Some devices support different peer limits when operating as initiator versus responder. Add max_peers fields inside the ftm.ista and ftm.rsta sub-structs of cfg80211_pmsr_capabilities to allow drivers to advertise per-role peer limits. These limits are generic and not restricted to any specific ranging type. Expose these over nl80211 using new NL80211_PMSR_ATTR_MAX_PEER_ISTA_ROLE and NL80211_PMSR_ATTR_MAX_PEER_RSTA_ROLE attributes inside the ISTA_CAPS and RSTA_CAPS nested attributes respectively. When a role limit is advertised, validate the number of peers in the request separately for each role using the existing rsta flag in the FTM request, and reject the request if the limit is exceeded. Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com> Link: https://patch.msgid.link/20260420090856.2152905-9-peddolla.reddy@oss.qualcomm.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Peddolla Harshavardhan Reddy
|
4e901e99ed |
wifi: cfg80211: extend PMSR FTM response for proximity ranging
Applications need negotiated session parameters to interpret proximity ranging results and perform post-processing. Currently, the FTM response lacks LTF repetition counts, time constraints, spatial stream configuration, and availability window parameters. Extend the FTM response structure to report these negotiated parameters, enabling applications to track session configuration and use them in post-processing to increase ranging precision. Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com> Link: https://patch.msgid.link/20260420090856.2152905-8-peddolla.reddy@oss.qualcomm.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Peddolla Harshavardhan Reddy
|
8823a9b0e7 |
wifi: cfg80211: add NTB continuous ranging and FTM request type support
Enable NTB continuous ranging with configurable timing and measurement
parameters as per the Wi-Fi Alliance specification "Proximity Ranging
(PR) Implementation Consideration Draft 1.9 Rev 1, section 5.3". Add
new FTM request attributes for min/max time between measurements,
nominal time (mandatory for NTB), AW duration, and total measurement
count.
Add NL80211_PMSR_PEER_ATTR_REQ_TYPE attribute using the new
nl80211_peer_measurement_ftm_req_type enum to allow userspace to
specify the ranging request type per peer:
- NL80211_PMSR_FTM_REQ_TYPE_INFRA: STA-to-AP or AP-to-STA ranging
(default if attribute is absent)
- NL80211_PMSR_FTM_REQ_TYPE_PD: peer-to-peer ranging
Validate the request type against the device TYPE_CAPS capabilities
advertised via NL80211_PMSR_FTM_CAPA_ATTR_TYPE_CAPS. Reject PD
requests if the device does not advertise PD support.
Reject PD requests that set trigger-based ranging, as TB ranging is
not compatible with peer-to-peer proximity detection.
Add ftms_per_burst limit of 4 for PD NTB ranging requests.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-7-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
||
|
Peddolla Harshavardhan Reddy
|
18709c618d |
wifi: cfg80211: add proximity detection capabilities to PMSR
Introduce Proximity Detection (PD) capabilities in Peer Measurement Service (PMSR) as defined in the Wi-Fi Alliance specification "Proximity Ranging (PR) Implementation Consideration Draft 1.9 Rev 1 section 3.3". This enables devices to advertise peer to peer ranging support. Restructure FTM capabilities in cfg80211_pmsr_capabilities to replace the single support_rsta flag with nested ista and rsta sub-structs, each carrying per-mode flags for Non-Trigger Based (NTB), Trigger Based (TB), and EDCA based ranging. This allows drivers to advertise detailed role and protocol support for both initiator and responder roles. Add support to pass additional ISTA and RSTA role capabilities to userspace using new nested ISTA_CAPS and RSTA_CAPS attributes. The legacy RSTA_SUPPORT flag is retained for backward compatibility. Add NL80211_PMSR_FTM_CAPA_ATTR_TYPE_CAPS nested attribute using the nl80211_peer_measurement_ftm_type_capa enum with two sub-flags: NL80211_PMSR_FTM_TYPE_CAPA_ATTR_INFRA_SUPPORT for STA-to-AP or AP-to-STA ranging, and NL80211_PMSR_FTM_TYPE_CAPA_ATTR_PD_SUPPORT for peer-to-peer ranging. Add CONCURRENT_ISTA_RSTA_SUPPORT as a FTM capability flag indicating the device can simultaneously act as initiator and responder in a multi-peer measurement request. Extend FTM capabilities with antenna configuration fields (max_no_of_tx_antennas, max_no_of_rx_antennas) for the PR Element during PASN negotiation, and ranging interval limits (min_allowed_ranging_interval_edca, min_allowed_ranging_interval_ntb) to advertise device timing constraints for EDCA and NTB-based ranging. Update the FTM request validation path in pmsr.c to check RSTA requests against the per-mode rsta capabilities (NTB, TB, EDCA), rejecting requests for modes the device does not support. Co-developed-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com> Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com> Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com> Link: https://patch.msgid.link/20260420090856.2152905-6-peddolla.reddy@oss.qualcomm.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Peddolla Harshavardhan Reddy
|
b47a6e4d66 |
wifi: cfg80211: add start/stop proximity detection commands
Currently, the proximity detection (PD) interface type has no start/stop commands defined, preventing user space from controlling PD operations through the nl80211 interface. Add NL80211_CMD_START_PD and NL80211_CMD_STOP_PD commands to allow user space to start and stop a PD interface. Add the corresponding start_pd and stop_pd operations to cfg80211_ops and ieee80211_ops, along with nl80211 command handlers, rdev wrappers, and tracing support. Validate that drivers advertising PD interface support implement the required operations. Handle PD interface teardown during device unregistration and when the interface leaves the network. Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com> Link: https://patch.msgid.link/20260420090856.2152905-5-peddolla.reddy@oss.qualcomm.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Peddolla Harshavardhan Reddy
|
55f23d68f9 |
wifi: cfg80211/mac80211: Add NL80211_IFTYPE_PD for PD PASN and PMSR operations
Add a new wdev-only interface type NL80211_IFTYPE_PD to support Proximity Detection (PD) operations such as PASN and peer measurement operations. This interface type operates without a netdev, similar to P2P_DEVICE and NAN interfaces. Implement support across cfg80211 and mac80211 layers with PD-specific checks gated by the NL80211_EXT_FEATURE_SECURE_RTT feature flag, management frame registration and transmission capabilities, and proper channel context handling where PD interfaces are excluded from bandwidth calculations. Update mac80211 to recognize the new interface type in the relevant paths for this management-only interface. PD discovery can be performed on any available interface, such as NL80211_IFTYPE_STATION. If PD/PMSR uses the MAC address of an existing interface type, such as NL80211_IFTYPE_STATION, then pairing and measurement shall use that same interface. If PD/PMSR uses a different MAC address, such as a random MAC address, then pairing and measurement can be performed on a new NL80211_IFTYPE_PD interface created with that random MAC address. Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com> Link: https://patch.msgid.link/20260420090856.2152905-4-peddolla.reddy@oss.qualcomm.com [fix comment style] Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Peddolla Harshavardhan Reddy
|
4dbd182904 |
wifi: cfg80211: Add MAC address filter to remain_on_channel
Currently the remain_on_channel operation does not support filtering incoming frames by destination MAC address. This prevents use cases such as PASN authentication in the responder side that need to receive frames addressed to a specific MAC during the off-channel period. Add an rx_addr parameter to the remain_on_channel operation callback and propagate it through the call chain from nl80211 to driver implementations. Introduce the extended feature NL80211_EXT_FEATURE_ROC_ADDR_FILTER as a capability gate so that cfg80211 rejects the request if the driver does not advertise support for address filtering. Extract the address from the NL80211_ATTR_MAC attribute when provided in the netlink message and update the tracing infrastructure to include the address in remain_on_channel trace events. The rx_addr parameter is optional and can be NULL, maintaining backward compatibility with existing drivers. Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com> Link: https://patch.msgid.link/20260420090856.2152905-3-peddolla.reddy@oss.qualcomm.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Tomi Valkeinen
|
3c8ed38450 |
drm/fourcc: Add DRM_FORMAT_XVUY2101010
Add XVUY2101010, a 10 bits per component YCbCr format in a 32 bit container. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Vishal Sagar <vishal.sagar@amd.com> Reviewed-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20260423-xilinx-formats-v10-6-c690c2b8ea89@ideasonboard.com Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> |
||
|
Tomi Valkeinen
|
7db42b1718 |
drm/fourcc: Add DRM_FORMAT_T430
Add T430, a 3 plane 10 bits per component non-subsampled YCbCr format. A new initial letter was chosen for this one, as the format doesn't match the existing P, Q or S formats. T is the next one in the alphabet. It was definitely not chosen because of the initial letter in the author's name. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Vishal Sagar <vishal.sagar@amd.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20260423-xilinx-formats-v10-5-c690c2b8ea89@ideasonboard.com Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> |
||
|
Tomi Valkeinen
|
e8e388c301 |
drm/fourcc: Add DRM_FORMAT_XYYY2101010
Add XYYY2101010 ("YPA4"), a 10 bit greyscale format, with 3 pixels
packed into 32-bit container, and two bits of padding.
The fourcc for the format is 'YPA4', which comes from Y - Y only, P -
packed, A - 10 (as in 0xA), 4 - 4 bytes.
Reviewed-by: Vishal Sagar <vishal.sagar@amd.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20260423-xilinx-formats-v10-4-c690c2b8ea89@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
||
|
Tomi Valkeinen
|
c0f8aaa7dc |
drm/fourcc: Add DRM_FORMAT_Y8
Add greyscale Y8 format. The 8-bit greyscale format has been discussed before, and the earlier guidance was to use DRM_FORMAT_R8, as a single-channel 8-bit pixel. However, adding DRM_FORMAT_Y8 makes sense, we can mark it as 'is_yuv' in the drm_format_info, and this can help the drivers handle e.g. full/limited range. This will distinguish two single-channel formats: R8, which is a RGB format with the same value for all components, and Y8, which is a Y-only YCbCr format, with Cb and Cr being neutral. Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com> Reviewed-by: Vishal Sagar <vishal.sagar@amd.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Simon Ser <contact@emersion.fr> Link: https://patch.msgid.link/20260423-xilinx-formats-v10-3-c690c2b8ea89@ideasonboard.com Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> |
||
|
Tomi Valkeinen
|
b718f04184 |
drm/fourcc: Add DRM_FORMAT_P230
Add a new pixel format, DRM_FORMAT_P230 ("P230")
P230 is 2 plane 10 bit per component YCbCr 2x1 subsampled format. P230
is similar to the already existing P030 format, which is 2x2 subsampled.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Vishal Sagar <vishal.sagar@amd.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20260423-xilinx-formats-v10-2-c690c2b8ea89@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
||
|
Kavita Kavita
|
829b815e91 |
wifi: cfg80211: indicate (Re)Association frame encryption to userspace
In SME-in-driver mode, the driver handles the entire (re)association exchange. Userspace (e.g., wpa_supplicant) currently has no explicit indication of whether the (re)association exchange was encrypted, making it difficult to distinguish EPP (Enhanced Privacy Protection, IEEE 802.11bi) associations from non-EPP associations. When (Re)Association frame encryption is used, the (Re)Association Response frame must contain a Key Delivery element as specified in IEEE P802.11bi/D4.0, Table 9-65. Userspace must process this element only when the (Re)Association Response frame is actually encrypted. Processing it unconditionally for unencrypted frames leads to incorrect behavior. Without an explicit indication from the driver, userspace cannot determine whether encryption was used and whether the Key Delivery element is valid. Add a new flag attribute NL80211_ATTR_ASSOC_ENCRYPTED and a corresponding field "assoc_encrypted" in cfg80211_connect_resp_params to indicate that both the (Re)Association Request and Response frames are transmitted encrypted over the air. For mac80211-based drivers, extend cfg80211_rx_assoc_resp_data with the assoc_encrypted field as well, which is then propagated to cfg80211_connect_resp_params. Pass the flag to userspace via NL80211_CMD_CONNECT event. Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com> Link: https://patch.msgid.link/20260504123624.529218-2-kavita.kavita@oss.qualcomm.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Laurent Pinchart
|
a1b6cf8e5e |
drm: uapi: Use SPDX in DRM core uAPI headers
The DRM core uAPI headers are licensed under the MIT license, and carry copies of the license with slight variations. Replace them with SPDX headers. Following a discussion with Simona Vetter on this topic, add a clarification in the drm-uapi.rst file that independent closed-source userspace implementations of software using the DRM uAPI are accepted, as allowed by the MIT license. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patch.msgid.link/20260407104951.1781047-1-laurent.pinchart+renesas@ideasonboard.com Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> |
||
|
Dave Airlie
|
27268b872e |
UAPI Changes:
- Debugfs multi-LRC engine info (Xin Wang, 2 commits) Expose multi-LRC engine classes in the debugfs engine info output and improve the output readability. - drm/drm_ras: Add clear-error-counter netlink command to drm_ras Cross-subsystem Changes: Core Changes: - drm/gpusvm: Reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges - drm/i915/display: switch to including common step file directly Driver Changes: - Engine initialization cleanup (Matt Roper, 10 commits) Clean up engine initialization code inherited from i915 by moving hardware programming (CCS enablement, HWSTAM, GFX_MODE, BLIT_CCTL, STOP_RING) into the RTP infrastructure. This makes the programming visible and verifiable via debugfs, and applies consistently across both normal and execlist init paths. Also fixes the name/definition of GFX_MODE, marks BCS engines as belonging to the GT forcewake domain, and drops the now-unused xe_hw_engine_mmio_write32() helper. - PF fair scheduling auto-provisioning (Michal Wajdeczko, 13 commits) Fix several corner cases in SR-IOV PF scheduling policy provisioning, then auto-provision PF and all VFs with 16ms execution-quantum and preemption-timeout defaults. This prevents a VF from monopolizing the GPU by submitting workloads without gaps, without requiring the user to configure sysfs manually. - System Controller support for CRI/Xe3p (Anoop Vijay + Raag Jadav, 10 commits) Add xe_sysctrl infrastructure for communicating with the System Controller firmware entity on CRI/Xe3p discrete GPU platforms via a mailbox interface. Includes type definitions, register definitions, mailbox communication, initialization, power management, interrupt handling, and event dispatch. Builds on this to add initial RAS correctable error handling, using sysctrl interrupts to receive threshold-crossed events. - PXP state machine fixes (Daniele Ceraolo Spurio, 4 commits) Fix PXP state machine handling: reject PXP sessions on PTL platforms with older GSC firmware that does not support it, fix the restart flag not being cleared after jumping back in pxp_start, remove incorrect handling of an impossible state during suspend, and clean up termination status on failure. - Reset/wedge/unload corner case fixes (Zhanjun Dong + Matthew Brost, 5 commits) Fix memory leaks and fence signal failures that occurred during GPU reset, device wedging, and driver unload by forcefully tearing down remaining exec queues in GuC submit fini, always killing queues in pause/abort, and triggering queue cleanup when not in wedged mode 2. Also ensures GuC CT state transitions via STOP before DISABLED. - Wedge path memory allocation fixes (Matthew Brost, 3 commits) Avoid GFP_KERNEL allocations in xe_device_declare_wedged(), which runs in the DMA-fence signaling path. Also drops the guc_submit_wedged_fini devm registration from xe_guc_submit_wedge() to clean up the wedge shutdown sequence. - PAT type cleanup and invalid index hardening (Xin Wang, 3 commits) Standardize pat_index fields to u16 across the driver, default XE_CACHE_NONE_COMPRESSION to XE_PAT_INVALID_IDX (matching WB_COMPRESSION), and introduce xe_cache_pat_idx() — a macro helper that validates cache_mode bounds and asserts on invalid PAT indices before returning the index. - Reject unsafe PAT indices for CPU cached memory (Jia Yao, 2 commits) Reject incoherent (coh_none) PAT indices for CPU cached memory in both the madvise ioctl and vm_bind with CPU_ADDR_MIRROR flag, closing a security gap where the GPU could bypass CPU caches and observe stale or sensitive data. - OA improvements for CRI device memory (Ashutosh Dixit, 3 commits) Move OA buffer access to the xe_map layer to support both system and device memory (required for CRI), switch OA buffer mmap to use drm_gem_mmap_obj, and implement workaround Wa_14026633728. - xe_drm.h documentation fixes (Shuicheng Lin, 6 commits) Fix multiple documentation issues in the xe_drm.h UAPI header: typos, spelling errors, grammar, wrong names and references, kernel-doc cross-reference syntax, and broken code examples. - kernel-doc syntax fixes in xe headers (Shuicheng Lin, 4 commits) Fix kernel-doc syntax issues across xe header files: missing '@' prefixes on member tags, stale/mismatched member tags, comment syntax errors, and type/parameter name mismatches in references. - Buffer object and DMA-buf resource leak fixes (Shuicheng Lin, 4 commits) Fix resource leaks on error paths: DMA-buf attachment leak in xe_gem_prime_import(), BO leak in xe_dma_buf_init_obj() on allocation failure, and BO leaks in xe_bo_init_locked() on GGTT flag validation and unaligned size validation failures. - Include guard cleanup (Shuicheng Lin, 5 commits) Fix and standardize include guards across xe header files: normalize double-underscore guards to single, add missing leading/trailing underscores, add missing _H suffixes, and add guards to previously unprotected headers. - VF CCS memory pool (Satyanarayana K V P, 2 commits) Switch VF CCS read/write operations from the DRM sub-allocator to DRM mm, fixing allocation failures in fence-disabled mode where the sub-allocator's hole cursor assumption breaks. Also introduces a general BO-backed memory pool with shadow support using drm_mm. - i915/xe step definition unification (Jani Nikula, 3 commits) Complete the migration to the shared intel_step header: switch xe from its own xe_step enum to the shared intel_step naming and definitions, and update i915 display code to include the common step header directly. - Xe3p GT tuning fixes (3 commits) Three Xe3p GT tuning corrections: fix the register offset for GAMSTLB_CTRL, stop applying the CCCHKNREG1 tuning from Xe3p onward (no longer needed), and mark ROW_CHICKEN5 as a masked register. - Forcewake cleanup in GT and GuC PC (Raag Jadav, 3 commits) Drop a redundant forcewake reference in xe_gt, reorder forcewake usage in xe_guc_pc_fini_hw() to avoid a redundant hold, and convert xe_guc_pc_stop() to void since it can no longer fail. - SVM garbage collector fix on close (Matthew Brost, 2 commits) Disable the SVM garbage collector work item when an SVM is closed to prevent use-after-free when the GC fires after the SVM is freed. - Admin-only PF mode (Satyanarayana K V P, 2 commits) Derive an "admin-only PF" mode flag from xe_device state instead of using a local flag, and restrict device query responses when running in admin-only PF mode to avoid exposing internal state. - Enable hwmon energy attributes and accepted power limit for CRI (2 commits) Enable energy consumption hwmon attributes for the CRI platform and add support for reading the accepted (sustained) power limit via hwmon. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCafNROQAKCRC4FpNVCsYG v31cAQCS/7wH9kwyUxQZOgs/HfuZvbgu5IyrGxaDSrHY7twRtAD7BhvkfOcyB9VK 6M2a7Y+QiVICgwjuDiwXikJalmRBmQE= =Y9j3 -----END PGP SIGNATURE----- Merge tag 'drm-xe-next-2026-04-30' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next UAPI Changes: - Debugfs multi-LRC engine info (Xin Wang, 2 commits) Expose multi-LRC engine classes in the debugfs engine info output and improve the output readability. - drm/drm_ras: Add clear-error-counter netlink command to drm_ras Cross-subsystem Changes: Core Changes: - drm/gpusvm: Reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges - drm/i915/display: switch to including common step file directly Driver Changes: - Engine initialization cleanup (Matt Roper, 10 commits) Clean up engine initialization code inherited from i915 by moving hardware programming (CCS enablement, HWSTAM, GFX_MODE, BLIT_CCTL, STOP_RING) into the RTP infrastructure. This makes the programming visible and verifiable via debugfs, and applies consistently across both normal and execlist init paths. Also fixes the name/definition of GFX_MODE, marks BCS engines as belonging to the GT forcewake domain, and drops the now-unused xe_hw_engine_mmio_write32() helper. - PF fair scheduling auto-provisioning (Michal Wajdeczko, 13 commits) Fix several corner cases in SR-IOV PF scheduling policy provisioning, then auto-provision PF and all VFs with 16ms execution-quantum and preemption-timeout defaults. This prevents a VF from monopolizing the GPU by submitting workloads without gaps, without requiring the user to configure sysfs manually. - System Controller support for CRI/Xe3p (Anoop Vijay + Raag Jadav, 10 commits) Add xe_sysctrl infrastructure for communicating with the System Controller firmware entity on CRI/Xe3p discrete GPU platforms via a mailbox interface. Includes type definitions, register definitions, mailbox communication, initialization, power management, interrupt handling, and event dispatch. Builds on this to add initial RAS correctable error handling, using sysctrl interrupts to receive threshold-crossed events. - PXP state machine fixes (Daniele Ceraolo Spurio, 4 commits) Fix PXP state machine handling: reject PXP sessions on PTL platforms with older GSC firmware that does not support it, fix the restart flag not being cleared after jumping back in pxp_start, remove incorrect handling of an impossible state during suspend, and clean up termination status on failure. - Reset/wedge/unload corner case fixes (Zhanjun Dong + Matthew Brost, 5 commits) Fix memory leaks and fence signal failures that occurred during GPU reset, device wedging, and driver unload by forcefully tearing down remaining exec queues in GuC submit fini, always killing queues in pause/abort, and triggering queue cleanup when not in wedged mode 2. Also ensures GuC CT state transitions via STOP before DISABLED. - Wedge path memory allocation fixes (Matthew Brost, 3 commits) Avoid GFP_KERNEL allocations in xe_device_declare_wedged(), which runs in the DMA-fence signaling path. Also drops the guc_submit_wedged_fini devm registration from xe_guc_submit_wedge() to clean up the wedge shutdown sequence. - PAT type cleanup and invalid index hardening (Xin Wang, 3 commits) Standardize pat_index fields to u16 across the driver, default XE_CACHE_NONE_COMPRESSION to XE_PAT_INVALID_IDX (matching WB_COMPRESSION), and introduce xe_cache_pat_idx() — a macro helper that validates cache_mode bounds and asserts on invalid PAT indices before returning the index. - Reject unsafe PAT indices for CPU cached memory (Jia Yao, 2 commits) Reject incoherent (coh_none) PAT indices for CPU cached memory in both the madvise ioctl and vm_bind with CPU_ADDR_MIRROR flag, closing a security gap where the GPU could bypass CPU caches and observe stale or sensitive data. - OA improvements for CRI device memory (Ashutosh Dixit, 3 commits) Move OA buffer access to the xe_map layer to support both system and device memory (required for CRI), switch OA buffer mmap to use drm_gem_mmap_obj, and implement workaround Wa_14026633728. - xe_drm.h documentation fixes (Shuicheng Lin, 6 commits) Fix multiple documentation issues in the xe_drm.h UAPI header: typos, spelling errors, grammar, wrong names and references, kernel-doc cross-reference syntax, and broken code examples. - kernel-doc syntax fixes in xe headers (Shuicheng Lin, 4 commits) Fix kernel-doc syntax issues across xe header files: missing '@' prefixes on member tags, stale/mismatched member tags, comment syntax errors, and type/parameter name mismatches in references. - Buffer object and DMA-buf resource leak fixes (Shuicheng Lin, 4 commits) Fix resource leaks on error paths: DMA-buf attachment leak in xe_gem_prime_import(), BO leak in xe_dma_buf_init_obj() on allocation failure, and BO leaks in xe_bo_init_locked() on GGTT flag validation and unaligned size validation failures. - Include guard cleanup (Shuicheng Lin, 5 commits) Fix and standardize include guards across xe header files: normalize double-underscore guards to single, add missing leading/trailing underscores, add missing _H suffixes, and add guards to previously unprotected headers. - VF CCS memory pool (Satyanarayana K V P, 2 commits) Switch VF CCS read/write operations from the DRM sub-allocator to DRM mm, fixing allocation failures in fence-disabled mode where the sub-allocator's hole cursor assumption breaks. Also introduces a general BO-backed memory pool with shadow support using drm_mm. - i915/xe step definition unification (Jani Nikula, 3 commits) Complete the migration to the shared intel_step header: switch xe from its own xe_step enum to the shared intel_step naming and definitions, and update i915 display code to include the common step header directly. - Xe3p GT tuning fixes (3 commits) Three Xe3p GT tuning corrections: fix the register offset for GAMSTLB_CTRL, stop applying the CCCHKNREG1 tuning from Xe3p onward (no longer needed), and mark ROW_CHICKEN5 as a masked register. - Forcewake cleanup in GT and GuC PC (Raag Jadav, 3 commits) Drop a redundant forcewake reference in xe_gt, reorder forcewake usage in xe_guc_pc_fini_hw() to avoid a redundant hold, and convert xe_guc_pc_stop() to void since it can no longer fail. - SVM garbage collector fix on close (Matthew Brost, 2 commits) Disable the SVM garbage collector work item when an SVM is closed to prevent use-after-free when the GC fires after the SVM is freed. - Admin-only PF mode (Satyanarayana K V P, 2 commits) Derive an "admin-only PF" mode flag from xe_device state instead of using a local flag, and restrict device query responses when running in admin-only PF mode to avoid exposing internal state. - Enable hwmon energy attributes and accepted power limit for CRI (2 commits) Enable energy consumption hwmon attributes for the CRI platform and add support for reading the accepted (sustained) power limit via hwmon. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patch.msgid.link/afNSeZJHC3X2m3-N@fedora |
||
|
Jackson Lee
|
5d801b5963 |
media: v4l2-controls: Add control for background detection
Add a generic V4L2 boolean control V4L2_CID_MPEG_VIDEO_BACKGROUND_DETECTION that allows encoders to detect background regions in a frame and use fewer bits or skip mode to encode them, potentially reducing bitrate for streams with stationary scenes. Signed-off-by: Jackson Lee <jackson.lee@chipsnmedia.com> Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org> |
||
|
Thomas Gleixner
|
010b7723c0 |
rseq: Don't advertise time slice extensions if disabled
If time slice extensions have been disabled on the kernel command line,
then advertising them in RSEQ flags is wrong.
Adjust the conditionals to reflect reality, fixup the misleading comments
about the gap of these flags and the rseq::flags field.
Fixes:
|
||
|
Jakub Kicinski
|
6855a52318 |
Some new content already, notably:
- mac80211: major rework of station bandwidth handling,
fixing issues with lower capability than AP
- general: cleanups for EMLSR spec issues (drafts differed)
- ath9k: GPIO interface improvements
- ath12k: replace dynamic memory allocation in WMI RX path
-----BEGIN PGP SIGNATURE-----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=cEhV
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-04-30' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Some new content already, notably:
- mac80211: major rework of station bandwidth handling,
fixing issues with lower capability than AP
- general: cleanups for EMLSR spec issues (drafts differed)
- ath9k: GPIO interface improvements
- ath12k: replace dynamic memory allocation in WMI RX path
* tag 'wireless-next-2026-04-30' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (39 commits)
wifi: brcmsmac: phy_lcn: Remove dead code in wlc_lcnphy_radio_2064_channel_tune_4313()
wifi: mac80211: always allow transmitting null-data on TXQs
wifi: mac80211: use kstrtobool_from_user() in debugfs callbacks
wifi: cfg80211: validate cipher suite for NAN Data keys
wifi: nl80211: check link is beaconing for color change
wifi: mac80211: clarify an 802.11 VHT spec reference
wifi: mac80211: fix per-station PHY capability bandwidth
wifi: mac80211: clarify per-STA bandwidth handling
wifi: nl80211: always validate AP operation/PHY regulatory
wifi: cfg80211: provide HT/VHT operation for AP beacon
wifi: nl80211: reject too short HT/VHT/HE/EHT capability/operation
wifi: cfg80211: move AP HT/VHT/... operation to beacon info
wifi: nl80211: reject beacons with bad HE operation
wifi: cfg80211: remove HE/SAE H2E required fields
wifi: mac80211: remove ieee80211_sta_cur_vht_bw()
wifi: mac80211: clean up ieee80211_sta_cap_rx_bw()
wifi: mac80211: clean up initial STA NSS/bandwidth handling
wifi: mac80211: clean up STA NSS handling
wifi: mac80211: simplify ieee80211_sta_rx_bw_to_chan_width()
wifi: nl80211: document channel opmode change channel width
...
====================
Link: https://patch.msgid.link/20260430120304.249081-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Ivan Vecera
|
781c8893a5 |
dpll: add pin operational state
Add pin-operstate enum and operstate_on_dpll_get callback to report the actual hardware status of a pin with respect to its parent DPLL device. Unlike pin-state (which reflects administrative intent set by the user), operstate reflects what the hardware is actually doing. Defined operational states: - active: pin is qualified and actively used by the DPLL - standby: pin is qualified but not actively used by the DPLL - no-signal: pin does not have a valid signal - qual-failed: pin signal failed qualification The operstate is reported inside the pin-parent-device nested attribute alongside the existing state and phase-offset attributes. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Petr Oros <poros@redhat.com> Link: https://patch.msgid.link/20260428154907.2820654-2-ivecera@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Martin Michaelis
|
7deba791ad |
io_uring/kbuf: support min length left for incremental buffers
Incrementally consumed buffer rings are generally fully consumed, but
it's quite possible that the application has a minimum size it needs to
meet to avoid truncation. Currently that minimum limit is 1 byte, but
this should be a setting that is the hands of the application. For
recvmsg multishot, a prime use case for incrementally consumed buffers,
the application may get spurious -EFAULT returned at the end of an
incrementally consumed buffer, as less space is available than the
headers need.
Grab a u32 field in struct io_uring_buf_reg, which the application can
use to inform the kernel of the minimum size that should be available
in an incrementally consumed buffer. If less than that is available,
the current buffer is fully processed and the next one will be picked.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Johannes Berg
|
032d1a3fc0 |
wifi: nl80211: document channel opmode change channel width
The opmode change notification is entirely unused by existing userspace except for printing out the values. As such, there's no need to keep it perfectly accurate, and the implementation in mac80211 doesn't report it correctly today. Add a note in the documentation that it may not differentiate 80+80 and 160. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20260415144514.87d5b1ce688f.Ia9a0769d52dcfe56f7b0dff903ed14db3ef04920@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Francesco Lavra
|
dd59392a3e |
iio: ABI: Add quaternion axis modifier
This modifier applies to the IIO_ROT channel type, and indicates a data
representation that specifies the {x, y, z} components of the normalized
quaternion vector.
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
||
|
Thomas Zimmermann
|
cafac16b62 |
Merge drm/drm-next into drm-misc-next
Getting fixes and updates from v7.1-rc1. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> |
||
|
Linus Torvalds
|
64edfa6506 |
Delete some obsolete networking code
Old code like amateur radio and NFC have long been a burden to core networking developers. syzbot loves to find bugs in BKL-era code, and noobs try to fix them. If we want to have a fighting chance of surviving the LLM-pocalypse this code needs to find a dedicated owner or get deleted. We've talked about these deletions multiple times in the past and every time someone wanted the code to stay. It is never very clear to me how many of those people actually use the code vs are just nostalgic to see it go. Amateur radio did have occasional users (or so I think) but most users switched to user space implementations since its all super slow stuff. Nobody stepped up to maintain the kernel code. We were lucky enough to find someone who wants to help with NFC so we're giving that a chance. Let's try to put the rest of this code behind us. Signed-off-by: Jakub Kicinski <kuba@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmnqqWYACgkQMUZtbf5S IrtEpQ/9F5+8POE6dg6gJVLDKx1+i6GiaOIweAl8h5DatzhBAAGuGr9JyTw0P/iy QX7/SU8WQIhi+LVTYBX9M5bJ3Rf+Iws4dll0CyoTTdOFvGwCAck8Ee/w+1gZdsQY aG0mQPmftfMEdZGX3KXt8UPDWG7QX4w1gSqxqYcSs1ohN6Txi1F94tmgqXgzYHzv vxWP3cF3XTv4eM6BpQj4tiLT3hvrTUfoCZEn9oF4Hn+miYU/yNlWxh0/pmfNjcxd vpNN0VfJVK48uPrj57Ep2x9OjkHPviojrUZT0Y55ENBhn1Lykry4MaxsJVsVYhuC OqJHQYTFyxwT/USTJxs1gplFyO0i37oCEEt43BKm2KS7rYHgc4pQgMJz7R2IS3wL z1xFl45QFt5kX3pw8BvWPXwBomkbDeFORB40Y1qc8RHMfAUKqOhbhzV8rDq9uKup 0nJxdijdh3/2qdO+LB1pU5rq/MbfAxOQSnRJmKLoKLVljaZHMAVbm829sdap8OM+ VMnyPF5hOAuTHV0NZJJ2BbcznI4MFDxM1lNEWFuRC39RQeeGRIHsNMjvs4HMHLaW V827UBXpUOK6HR3nGCKX3VpLJByUYAIkdIKvRugbWdynvXAw+FJUHx4wRzvFi6oi E7ucUY+FI5YOS1rmQJ+rqBjhThcIAdj2U9SNAykDKRVa7zPEUMU= =3vMU -----END PGP SIGNATURE----- Merge tag 'net-deletions' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking deletions from Jakub Kicinski: "Delete some obsolete networking code Old code like amateur radio and NFC have long been a burden to core networking developers. syzbot loves to find bugs in BKL-era code, and noobs try to fix them. If we want to have a fighting chance of surviving the LLM-pocalypse this code needs to find a dedicated owner or get deleted. We've talked about these deletions multiple times in the past and every time someone wanted the code to stay. It is never very clear to me how many of those people actually use the code vs are just nostalgic to see it go. Amateur radio did have occasional users (or so I think) but most users switched to user space implementations since its all super slow stuff. Nobody stepped up to maintain the kernel code. We were lucky enough to find someone who wants to help with NFC so we're giving that a chance. Let's try to put the rest of this code behind us" * tag 'net-deletions' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: drivers: net: 8390: wd80x3: Remove this driver drivers: net: 8390: ultra: Remove this driver drivers: net: 8390: AX88190: Remove this driver drivers: net: fujitsu: fmvj18x: Remove this driver drivers: net: smsc: smc91c92: Remove this driver drivers: net: smsc: smc9194: Remove this driver drivers: net: amd: nmclan: Remove this driver drivers: net: amd: lance: Remove this driver drivers: net: 3com: 3c589: Remove this driver drivers: net: 3com: 3c574: Remove this driver drivers: net: 3com: 3c515: Remove this driver drivers: net: 3com: 3c509: Remove this driver net: packetengines: remove obsolete yellowfin driver and vendor dir net: packetengines: remove obsolete hamachi driver net: remove unused ATM protocols and legacy ATM device drivers net: remove ax25 and amateur radio (hamradio) subsystem net: remove ISDN subsystem and Bluetooth CMTP caif: remove CAIF NETWORK LAYER |
||
|
Riana Tauro
|
ee18d39a08
|
drm/drm_ras: Add clear-error-counter netlink command to drm_ras
Introduce a new 'clear-error-counter' drm_ras command to reset the counter
value for a specific error counter of a given node.
The command is a 'do' netlink request with 'node-id' and 'error-id'
as parameters with no response payload.
Usage:
$ sudo ynl --family drm_ras --do clear-error-counter --json \
'{"node-id":1, "error-id":1}'
None
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20260409073318.2909379-5-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Maxime Ripard <mripard@redhat.com>
|
||
|
Jakub Kicinski
|
dd8d4bc28a |
net: remove ax25 and amateur radio (hamradio) subsystem
Remove the amateur radio (AX.25, NET/ROM, ROSE) protocol implementation and all associated hamradio device drivers from the kernel tree. This set of protocols has long been a huge bug/syzbot magnet, and since nobody stepped up to help us deal with the influx of the AI-generated bug reports we need to move it out of tree to protect our sanity. The code is moved to an out-of-tree repo: https://github.com/linux-netdev/mod-orphan if it's cleaned up and reworked there we can accept it back. Minimal stub headers are kept for include/net/ax25.h (AX25_P_IP, AX25_ADDR_LEN, ax25_address) and include/net/rose.h (ROSE_ADDR_LEN) so that the conditional integration code in arp.c and tun.c continues to compile and work when the out-of-tree modules are loaded. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Carlos Bilbao <carlos.bilbao@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://patch.msgid.link/20260421021824.1293976-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Jakub Kicinski
|
4f10f1dfb2 |
net: remove ISDN subsystem and Bluetooth CMTP
Remove the ISDN (mISDN, CAPI) subsystem and Bluetooth CMTP protocol from the kernel tree. ISDN is a pretty old technology and it's unclear whether anyone still uses it. I went over the last few years of git history and all the commits are either tree-wide conversions or syzbot/static analyzer fixes. When we discussed removal in the past IIRC there were some concerns about ISDN still being used in parts of Germany. Unfortunately, the code base is quite old, none of the current maintainers are familiar with it and AI tools will have a field day finding bugs here. Delete this code and preserve it in an out-of-tree repository for any remaining users: https://github.com/linux-netdev/mod-orphan UAPI constants AF_ISDN/PF_ISDN and the SELinux isdn_socket class are preserved for ABI stability, but the rest of uAPI is removed. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260421022108.1299678-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Jakub Kicinski
|
6d5431555d |
caif: remove CAIF NETWORK LAYER
Remove CAIF (Communication CPU to Application CPU Interface), the ST-Ericsson modem protocol. The subsystem has been orphaned since 2013. The last meaningful changes from the maintainers were in March 2013: |
||
|
Linus Torvalds
|
8fd12b03c7 |
hyperv-next for v7.1
-----BEGIN PGP SIGNATURE----- iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmnobFATHHdlaS5saXVA a2VybmVsLm9yZwAKCRB2FHBfkEGgXhafB/wMvf8yu4FgapbSRIlPboeW/ONDyuHd k0y1a0IFMQLspWfCxK8+snEcHT3g9xzG3ksqcnac0SPgzqxQ4dlK/c7Xr+5EBXuf TEt/bHrt6KT5BUpb1k/XxcdoObCsvZd3vfqR020OsHijw1Ni9PrdqeZxk56/vFJs nvgyKvsrAEyfALOH1Vgwg0gNWpqJBj1KcT3Kl1o4p5lwQzVpUREZii6RyvgXT/pu mckN63FrEPOpDaJllHmCPcfFSzqNi+wFQcFxm35w9rDQsVdnMsRWoJbcXNYW5QGM +KOZ1/tzw4Z3queW78hcxsH6sXiElLDsJgtDohBhxbVvUXy+xHrJCOm5 =4Ke3 -----END PGP SIGNATURE----- Merge tag 'hyperv-next-signed-20260421' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V updates from Wei Liu: - Fix cross-compilation for hv tools (Aditya Garg) - Fix vmemmap_shift exceeding MAX_FOLIO_ORDER in mshv_vtl (Naman Jain) - Limit channel interrupt scan to relid high water mark (Michael Kelley) - Export hv_vmbus_exists() and use it in pci-hyperv (Dexuan Cui) - Fix cleanup and shutdown issues for MSHV (Jork Loeser) - Introduce more tracing support for MSHV (Stanislav Kinsburskii) * tag 'hyperv-next-signed-20260421' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Skip LP/VP creation on kexec x86/hyperv: move stimer cleanup to hv_machine_shutdown() Drivers: hv: vmbus: fix hyperv_cpuhp_online variable shadowing mshv: Add tracepoint for GPA intercept handling mshv_vtl: Fix vmemmap_shift exceeding MAX_FOLIO_ORDER tools: hv: Fix cross-compilation Drivers: hv: vmbus: Export hv_vmbus_exists() and use it in pci-hyperv mshv: Introduce tracing support Drivers: hv: vmbus: Limit channel interrupt scan to relid high water mark |
||
|
Linus Torvalds
|
a85d6ff994 |
SCSI misc on 20260421
Usual driver updates (ufs, lpfc, fnic, target, mpi3mr). The substantive core changes are adding a 'serial' sysfs attribute and getting sd to support > PAGE_SIZE sectors. Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> -----BEGIN PGP SIGNATURE----- iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaeeTSRsUgAAAAAAEAA5t YW51MiwyLjUrMS4xMiwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy c2hpcC5jb20ACgkQ50LJTO6YrIXxbAEA+LYW6sZ4JHAKRAlU1kPxlPFP18eBjcHa HqWm8/sllyoBAIBt6ldCACW8sP0bLCDTpLz21XZqJGHm7bvR8xkyca0Q =oglt -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "Usual driver updates (ufs, lpfc, fnic, target, mpi3mr). The substantive core changes are adding a 'serial' sysfs attribute and getting sd to support > PAGE_SIZE sectors" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (98 commits) scsi: target: Don't validate ignored fields in PROUT PREEMPT scsi: qla2xxx: Use nr_cpu_ids instead of NR_CPUS for qp_cpu_map allocation scsi: ufs: core: Disable timestamp for Kioxia THGJFJT0E25BAIP scsi: mpi3mr: Fix typo scsi: sd: fix missing put_disk() when device_add(&disk_dev) fails scsi: libsas: Delete unused to_dom_device() and to_dev_attr() scsi: storvsc: Handle PERSISTENT_RESERVE_IN truncation for Hyper-V vFC scsi: iscsi_tcp: Remove unneeded selections of CRYPTO and CRYPTO_MD5 scsi: lpfc: Update lpfc version to 15.0.0.0 scsi: lpfc: Add PCI ID support for LPe42100 series adapters scsi: lpfc: Introduce 128G link speed selection and support scsi: lpfc: Check ASIC_ID register to aid diagnostics during failed fw updates scsi: lpfc: Update construction of SGL when XPSGL is enabled scsi: lpfc: Remove deprecated PBDE feature scsi: lpfc: Add REG_VFI mailbox cmd error handling scsi: lpfc: Log MCQE contents for mbox commands with no context scsi: lpfc: Select mailbox rq_create cmd version based on SLI4 if_type scsi: lpfc: Break out of IRQ affinity assignment when mask reaches nr_cpu_ids scsi: ufs: core: Make the header files self-contained scsi: ufs: core: Remove an include directive from ufshcd-crypto.h ... |
||
|
Alan Maguire
|
f7a6b9eaff |
bpf: Extend BTF UAPI vlen, kinds to use unused bits
BTF maximum vlen is encoded using 16 bits with a maximum vlen of 65535. This has sufficed for structs, function parameters and enumerated type values. However, with upcoming BTF location information - in particular information about inline sites - this limit is surpassed. Use bits 16-23 - currently unused in BTF info - to extend to 24 bits, giving a max vlen of (2^24 - 1), or 16 million. Also extend BTF kind encoding from 5 to 7 bits, giving a maximum available number of kinds of 128. Since with the BTF location work we use another 3 kinds, we are fast approaching the current limit of 32. Convert BTF_MAX_* values to enums to allow them to be encoded in kernel BTF; this will allow us to detect if the running kernel supports a 24-bit vlen or not. Add one for max _possible_ (not used) kind. Fix up a few places in the kernel where a 16-bit vlen is assumed; remove BTF_INFO_MASK as now all bits are used. The vlen expansion was suggested by Andrii in [1]; the kind expansion is tackled here too as it may be needed also to support new kinds in BTF. [1] https://lore.kernel.org/bpf/CAEf4BzZx=X6vGqcA8SPU6D+v6k+TR=ZewebXMuXtpmML058piw@mail.gmail.com/ Suggested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Acked-by: Mykyta Yatsenko <yatsenko@meta.com> Link: https://lore.kernel.org/r/20260417143023.1551481-2-alan.maguire@oracle.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Linus Torvalds
|
065c4e67cc |
Mostly cleanups and small things, notably:
- musl libc compatibility - vDSO installation fix - TLB sync race fix for recent SMP support - build fix for 32-bit with Clang 20/21 -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEpeA8sTs3M8SN2hR410qiO8sPaAAFAmnmKS4ACgkQ10qiO8sP aAD2+w//dOOblgUYgQJUXIxHpS7Gcb3Tm+a7ujC23q/kWf/pc8milCSf+zoxzUXL 23Vwh4Gt4KrHKp8lG1gU3xZqV0qwhXNi5HO2hMpB0ioIVpX3TcrUhFbp/Oirvhgi 3PvnvsFtUlW82DFgewB98tefXZSAlG/pg+RjQ3weHfEo+xQbjYc+kR8o59tN8LNR Ea4rrxyjsr3KN2yBNaFpDkMchudP6XWgKByAZBxZ2FofC3zuVRCyF8ThDfQl/3/W muSqX+2iuKjGpmxV0XWt72hYOhNYjBtDY7f4EPe6sbUy+PU6SjD9h/s7VTyVHgZR 3Sii9AQLLJNYPoglExMfmWfeUnJCUJNNTLUze+ZtnhURZQYTvyJRzVmKj6fDPjK2 jGEKXanfZCK9Cfgy2f2xbQxCxhAVwz6QT0XaQO2dZBXa0anzG+2HM0Zn8MNa9jbU +Lm11k1jd1QBifr+5zeni98KHt2mf77blCny8TraODgLNgWUVi5kMkPF4bZgD4Qj udMU9lOkTD08R89hG/Le9TsB+NIpPauyNxDHUpC/VDterFdZqFvmOFT6afTo/4RZ nXNVdL1tn+7O7v0bLdbyhXwj2her1GDbe6HZ5eTNqmjcOthcgI3gF2stDfFhEbNb /wMHnpGPncMeEI8YWtWOFA4FA5T32+LafLCKhuRJdaw0+f/NMOo= =oovZ -----END PGP SIGNATURE----- Merge tag 'uml-for-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux Pull uml updates from Johannes Berg: "Mostly cleanups and small things, notably: - musl libc compatibility - vDSO installation fix - TLB sync race fix for recent SMP support - build fix for 32-bit with Clang 20/21" * tag 'uml-for-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: um: Disable GCOV_PROFILE_ALL on 32-bit UML with Clang 20/21 um: drivers: call kernel_strrchr() explicitly in cow_user.c um: Replace strncpy() with strnlen()+memcpy_and_pad() in strncpy_chunk_from_user() x86/um: fix vDSO installation um: Remove CONFIG_FRAME_WARN from x86_64_defconfig um: Fix pte_read() and pte_exec() for kernel mappings um: Fix potential race condition in TLB sync um: time-travel: clean up kernel-doc warnings um: avoid struct sigcontext redefinition with musl um: fix address-of CMSG_DATA() rvalue in stub |
||
|
Linus Torvalds
|
4b0b946019 |
RDMA v7.1 merge window
Usual collection of driver changes, more core infrastructure updates that
typical this cycle:
- Minor cleanups and kernel-doc fixes in bnxt_re, hns, rdmavt, efa, ocrdma,
erdma, rtrs, hfi1, ionic, and pvrdma
- New udata validation framework and driver updates
- Modernize CQ creation interface in mlx4 and mlx5, manage CQ umem in core
- Promote UMEM to a core component, split out DMA block iterator logic
- Introduce FRMR pools with aging, statistics, pinned handles, and netlink
control and use it in mlx5
- Add PCIe TLP emulation support in mlx5
- Extend umem to work with revocable pinned dmabuf's and use it in irdma
- More net namespace improvements for rxe
- GEN4 hardware support in irdma
- First steps to MW and UC support in mana_ib
- Support for CQ umem and doorbells in bnxt_re
- Drop opa_vnic driver from hfi1
- Fixes:
IB/core zero dmac neighbor resolution race
GID table memory free
rxe pad/ICRC validation and r_key async errors
mlx4 external umem for CQ
umem DMA attributes on unmap
mana_ib RX steering on RSS QP destroy
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaeJyjAAKCRCFwuHvBreF
YXWOAQDZz7buqUgw45ufFMcClAfnIYeAIb0dlD5vnltvbIkUFgEAmOabYPZk0PHY
NlmfFBmWmIYXwgMHfYPlN1xYN/+Fjww=
=dd92
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"The usual collection of driver changes, more core infrastructure
updates that typical this cycle:
- Minor cleanups and kernel-doc fixes in bnxt_re, hns, rdmavt, efa,
ocrdma, erdma, rtrs, hfi1, ionic, and pvrdma
- New udata validation framework and driver updates
- Modernize CQ creation interface in mlx4 and mlx5, manage CQ umem in
core
- Promote UMEM to a core component, split out DMA block iterator
logic
- Introduce FRMR pools with aging, statistics, pinned handles, and
netlink control and use it in mlx5
- Add PCIe TLP emulation support in mlx5
- Extend umem to work with revocable pinned dmabuf's and use it in
irdma
- More net namespace improvements for rxe
- GEN4 hardware support in irdma
- First steps to MW and UC support in mana_ib
- Support for CQ umem and doorbells in bnxt_re
- Drop opa_vnic driver from hfi1
Fixes:
- IB/core zero dmac neighbor resolution race
- GID table memory free
- rxe pad/ICRC validation and r_key async errors
- mlx4 external umem for CQ
- umem DMA attributes on unmap
- mana_ib RX steering on RSS QP destroy"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (116 commits)
RDMA/core: Fix user CQ creation for drivers without create_cq
RDMA/ionic: bound node_desc sysfs read with %.64s
IB/core: Fix zero dmac race in neighbor resolution
RDMA/mana_ib: Support memory windows
RDMA/rxe: Validate pad and ICRC before payload_size() in rxe_rcv
RDMA/core: Prefer NLA_NUL_STRING
RDMA/core: Fix memory free for GID table
RDMA/hns: Remove the duplicate calls to ib_copy_validate_udata_in()
RDMA: Remove redundant = {} for udata req structs
RDMA/irdma: Add missing comp_mask check in alloc_ucontext
RDMA/hns: Add missing comp_mask check in create_qp
RDMA/mlx5: Pull comp_mask validation into ib_copy_validate_udata_in_cm()
RDMA: Use ib_copy_validate_udata_in_cm() for zero comp_mask
RDMA/hns: Use ib_copy_validate_udata_in()
RDMA/mlx4: Use ib_copy_validate_udata_in() for QP
RDMA/mlx4: Use ib_copy_validate_udata_in()
RDMA/mlx5: Use ib_copy_validate_udata_in() for MW
RDMA/mlx5: Use ib_copy_validate_udata_in() for SRQ
RDMA/pvrdma: Use ib_copy_validate_udata_in() for srq
RDMA: Use ib_copy_validate_udata_in() for implicit full structs
...
|
||
|
Linus Torvalds
|
36d179fd6b |
NFSD 7.1 Release Notes
Benjamin Coddington contributed filehandle signing to defend against filehandle-guessing attacks. The server now appends a SipHash-2-4 MAC to each filehandle when the new "sign_fh" export option is enabled. NFSD then verifies filehandles received from clients against the expected MAC; mismatches return NFS error STALE. Chuck Lever converted the entire NLMv4 server-side XDR layer from hand-written C to xdrgen-generated code, spanning roughly thirty patches. XDR functions are generally boilerplate code and are easy to get wrong. The goals of this conversion are improved memory safety, lower maintenance burden, and groundwork for eventual Rust code generation for these functions. Dai Ngo improved pNFS block/SCSI layout robustness with two related changes. SCSI persistent reservation fencing is now tracked per client and per device via an xarray, to avoid both redundant preempt operations on devices already fenced and a potential NFSD deadlock when all nfsd threads are waiting for a layout return. The remaining patches deliver scalability and infrastructure improvements. Sincere thanks to all contributors, reviewers, testers, and bug reporters who participated in the v7.1 NFSD development cycle. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEKLLlsBKG3yQ88j7+M2qzM29mf5cFAmnlF50ACgkQM2qzM29m f5dfHBAAi2o1i9/RA6fmxi2qSV7tkg79viuGFRj3c4cjiW8ZqQXos63zmy6BNMFG joEoirdryUETkrrckXP81HKGSWBQqYjaXeklOw8dggQ8g72HGiqcoT3Ua7L9S7A8 /Db6IwZnJcehHO8XwHV4jSAfIZuvC0iiK02tVrVe/l/9GWcG+bS340GgE9Es2IAW copBGlTwQah+eRvy2hP+Eo3vUTP8Rdebp9iYFI12xqx2x3LquFR01PpjCzotqAvV AcvCPa/AGoSOjcL8idloL8F8mSaOCyx15YJH0lm3hRsPtS/VyXWjKvcejWUh/7PH gHi+5VTsSKbUBj3PJQZU6rBQ67KnwVLZ33KkIF2ZNGllvK0yDGM0UfX/TuaEPjUV 6N0UkRprCHJdrULt9XMXmX3Ddnz1xbYT8CaeIDObw3Ix7SJKedvlLTjvsYCYtsQn 5pkHUuHmr/YAF4AQi/JI4ubZhZ+K3YytNS8YiMUkBWDbPoKzo2yrkzwjGjHdUp0y l8LfEjePAcIpuFQZegERA9CnjIeKb66DJe8da0EwtreY+sejm/S8zbBUhMkXjo6u QwdXXeLX3/zni6Op8vRA5JH//S5ovlQFnkUSvHRItSUrDBRVm+wXD7Vnp9bykKcN leqbSvehnV4PIi0URMvN5ox1WNmsOFIZkv9nv8amyOX8PlRmLoA= =iFl6 -----END PGP SIGNATURE----- Merge tag 'nfsd-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd updates from Chuck Lever: - filehandle signing to defend against filehandle-guessing attacks (Benjamin Coddington) The server now appends a SipHash-2-4 MAC to each filehandle when the new "sign_fh" export option is enabled. NFSD then verifies filehandles received from clients against the expected MAC; mismatches return NFS error STALE - convert the entire NLMv4 server-side XDR layer from hand-written C to xdrgen-generated code, spanning roughly thirty patches (Chuck Lever) XDR functions are generally boilerplate code and are easy to get wrong. The goals of this conversion are improved memory safety, lower maintenance burden, and groundwork for eventual Rust code generation for these functions. - improve pNFS block/SCSI layout robustness with two related changes (Dai Ngo) SCSI persistent reservation fencing is now tracked per client and per device via an xarray, to avoid both redundant preempt operations on devices already fenced and a potential NFSD deadlock when all nfsd threads are waiting for a layout return. - scalability and infrastructure improvements Sincere thanks to all contributors, reviewers, testers, and bug reporters who participated in the v7.1 NFSD development cycle. * tag 'nfsd-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (83 commits) NFSD: Docs: clean up pnfs server timeout docs nfsd: fix comment typo in nfsxdr nfsd: fix comment typo in nfs3xdr NFSD: convert callback RPC program to per-net namespace NFSD: use per-operation statidx for callback procedures svcrdma: Use contiguous pages for RDMA Read sink buffers SUNRPC: Add svc_rqst_page_release() helper SUNRPC: xdr.h: fix all kernel-doc warnings svcrdma: Factor out WR chain linking into helper svcrdma: Add Write chunk WRs to the RPC's Send WR chain svcrdma: Clean up use of rdma->sc_pd->device svcrdma: Clean up use of rdma->sc_pd->device in Receive paths svcrdma: Add fair queuing for Send Queue access SUNRPC: Optimize rq_respages allocation in svc_alloc_arg SUNRPC: Track consumed rq_pages entries svcrdma: preserve rq_next_page in svc_rdma_save_io_pages SUNRPC: Handle NULL entries in svc_rqst_release_pages SUNRPC: Allocate a separate Reply page array SUNRPC: Tighten bounds checking in svc_rqst_replace_page NFSD: Sign filehandles ... |
||
|
Linus Torvalds
|
99ef60d119 |
USB / Thunderbolt changes for 7.1-rc1
Here is the big set of USB and Thunderbolt changes for 7.1-rc1.
Lots of little things in here, nothing major, just constant
improvements, updates, and new features. Highlights are:
- new USB power supply driver support (will cause merge conflicts in
drivers/power/supply/Makefile, but it's a simple fix) These changes
did touch outside of drivers/usb/ but got acks from the relevant
mantainers for them.
- dts file updates and conversions
- string function conversions into "safer" ones
- new device quirks
- xhci driver updates
- usb gadget driver minor fixes
- typec driver additions and updates
- small number of thunderbolt driver changes
- dwc3 driver updates and additions of new hardware support
- other minor driver updates
All of these have been in the linux-next tree for a while with no
reported issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaeSx6g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynqjQCgqhbj0Pg2DiL+hZ4xEVlsKD8MJsMAn0vbdsR5
UiYztWABA245P1hO9i+K
=/fxh
-----END PGP SIGNATURE-----
Merge tag 'usb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 7.1-rc1.
Lots of little things in here, nothing major, just constant
improvements, updates, and new features. Highlights are:
- new USB power supply driver support.
These changes did touch outside of drivers/usb/ but got acks from
the relevant mantainers for them.
- dts file updates and conversions
- string function conversions into "safer" ones
- new device quirks
- xhci driver updates
- usb gadget driver minor fixes
- typec driver additions and updates
- small number of thunderbolt driver changes
- dwc3 driver updates and additions of new hardware support
- other minor driver updates
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'usb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (176 commits)
usb: dwc3: starfive: Add JHB100 USB 2.0 DRD controller
dt-bindings: usb: dwc3: add support for StarFive JHB100
dt-bindings: usb: atmel,at91sam9rl-udc: convert to DT schema
dt-bindings: usb: atmel,at91rm9200-udc: convert to DT schema
dt-bindings: usb: generic-ehci: fix schema structure and add at91sam9g45 constraints
dt-bindings: usb: generic-ohci: add AT91RM9200 OHCI binding support
arm: dts: at91: remove unused #address-cells/#size-cells from sam9x60 udc node
drivers/usb/host: Fix spelling error 'seperate' -> 'separate'
usbip: tools: add hint when no exported devices are found
USB: serial: iuu_phoenix: fix iuutool author name
usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb()
usb: gadget: f_phonet: fix skb frags[] overflow in pn_rx_complete()
usb: gadget: f_hid: Add missing error code
usb: typec: cros_ec_ucsi: Load driver from OF and ACPI definitions
dt-bindings: chrome: Add cros-ec-ucsi compatibility to typec binding
USB: of: Simplify with scoped for each OF child loop
usbip: validate number_of_packets in usbip_pack_ret_submit()
usb: gadget: renesas_usb3: validate endpoint index in standard request handlers
usb: core: config: reverse the size check of the SSP isoc endpoint descriptor
usb: typec: ucsi: Set usb mode on partner change
...
|
||
|
Linus Torvalds
|
73398c2772 |
TTY/Serial changes for 7.1-rc1
Here is the set of tty and serial driver changes for 7.1-rc1. Not much here this cycle, biggest thing is the removal of an old driver that never got any actual hardware support (esp32), and the second try to moving the tty ports to their own workqueues (first try was in 7.0-rc1 but was reverted due to problems.) Otherwise it's just a small set of driver updates and some vt modifier key enhancements. All have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaeTdzg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymr3gCeKwRtlyy5LOFs/vikB47gf/aBb1MAoIv4JBDo xWvKMVFvMD7XfsJkPHyR =l37E -----END PGP SIGNATURE----- Merge tag 'tty-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the set of tty and serial driver changes for 7.1-rc1. Not much here this cycle, biggest thing is the removal of an old driver that never got any actual hardware support (esp32), and the second try to moving the tty ports to their own workqueues (first try was in 7.0-rc1 but was reverted due to problems) Otherwise it's just a small set of driver updates and some vt modifier key enhancements. All have been in linux-next for a while with no reported issues" * tag 'tty-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (35 commits) tty: serial: ip22zilog: Fix section mispatch warning hvc/xen: Check console connection flag serial: sh-sci: Add support for RZ/G3L RSCI dt-bindings: serial: renesas,rsci: Document RZ/G3L SoC tty: atmel_serial: update outdated reference to atmel_tasklet_func() serial: xilinx_uartps: Drop unused include serial: qcom-geni: drop stray newline format specifier serial: 8250: loongson: Enable building on MIPS Loongson64 dt-bindings: serial: 8250: Add Loongson 3A4000 uart compatible serial: 8250_fintek: Add support for F81214E tty: tty_port: add workqueue to flip TTY buffer vt: support ITU-T T.416 color subparameters serial: qcom-geni: Fix RTS behavior with flow control tty: serial: imx: keep dma request disabled before dma transfer setup tty: serial: 8250: Add SystemBase Multi I/O cards serial: pic32_uart: allow driver to be compiled on all architectures with COMPILE_TEST serial: tegra: remove Kconfig dependency on APB DMA controller dt-bindings: serial: amlogic,meson-uart: Add compatible string for A9 dt-bindings: serial: atmel,at91-usart: add microchip,lan9691-usart serial: auart: check clk_enable() return in console write ... |
||
|
Linus Torvalds
|
cdd4dc3aeb |
Major changes:
- Write support:
Implemented full write support based on the classic read-only NTFS
driver. Added delayed allocation to improve write performance through
multi-cluster allocation and reduced fragmentation of the cluster
bitmap.
- iomap conversion:
Switched buffered IO (reads/writes), direct IO, file extent mapping,
readpages, and writepages to use iomap.
- Remove buffer_head:
Completely removed buffer_head usage by converting to folios.
As a result, the dependency on CONFIG_BUFFER_HEAD has been removed
from Kconfig.
- Stability improvements:
The new ntfs driver passes 326 xfstests, compared to 273 for ntfs3.
All tests passed by ntfs3 are a complete subset of the tests passed
by this implementation. Added support for fallocate, idmapped mounts,
permissions, and more.
- xfstests Results report:
Total tests run: 787
Passed : 326
Failed : 38
Skipped : 423
Failed tests breakdown:
- 34 tests require metadata journaling
- 4 other tests:
094: No unwritten extent concept in NTFS on-disk format
563: cgroup v2 aware writeback accounting not supported
631: RENAME_WHITEOUT support required
787: NFS delegation test
-----BEGIN PGP SIGNATURE-----
iQJKBAABCgA0FiEE6NzKS6Uv/XAAGHgyZwv7A1FEIQgFAmnhuSoWHGxpbmtpbmpl
b25Aa2VybmVsLm9yZwAKCRBnC/sDUUQhCCtPD/9SCy3cCJZqzAtiRIYmrVD4ji9a
vE4rZLu2A1SfTATjpKOgn7gLjBq0b2m3MxpdE8AawtXKmqOPLQFD4zj2sWePznfJ
zy1tim2b5rEKNBQjlzoMGpmbuL+GvDWRE/RtlFQAy5uxLrqCWxtlsP0VcgKwvi+1
MvhghuLNPCAtYA3ajadLUXK8LmhMtPVNHEqykFzTjcKAPqZyWAyS4wW7UXfPYccW
u+XBxuR6qdlWoVpQ3ig+gJSkadViQ/PfpjzCGPsyyvaiR0t3//SexOnhHKNgPStm
zKmD3X38y0X3wUaoDysNboPCM9+d0WsHX8whMgcCUXrIv0SRy5IL5RH0GmotaVha
n6uUfAJ3BsBbF0DgXe4VKbY9M7UoQfjPEre52F5arM6y0qcQ+2HtvBZPCqQccb4o
MsbuhgjyArN4LVwDb6sMK7psLjrxvuAiPtvUMUzgAt2cqCgFnHUR/SAOLy3q/RR4
6QCcfoOJX4YK5AJYgQdAXuF8h8T865OR3dPIKyz5SMyjcj+epPdf/mf4Fhe3xfpO
a8iFoQlKwLbD6zvpZcD5PMEAFpaVJEyYaAZ7DJLhfRpBofbn7y1U84/Ryq52+n1K
Me8ePvuN2Q2HjTr2RjoqnV+SAgVFeifOyrYUCu8HiGVkfpFw5UfQRJUflt4l5+cd
wA2frad6InBq4nGO4A==
=x5UX
-----END PGP SIGNATURE-----
Merge tag 'ntfs-for-7.1-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/ntfs
Pull ntfs resurrection from Namjae Jeon:
"Ever since Kari Argillander’s 2022 report [1] regarding the state of
the ntfs3 driver, I have spent the last 4 years working to provide
full write support and current trends (iomap, no buffer head, folio),
enhanced performance, stable maintenance, utility support including
fsck for NTFS in Linux.
This new implementation is built upon the clean foundation of the
original read-only NTFS driver, adding:
- Write support:
Implemented full write support based on the classic read-only NTFS
driver. Added delayed allocation to improve write performance
through multi-cluster allocation and reduced fragmentation of the
cluster bitmap.
- iomap conversion:
Switched buffered IO (reads/writes), direct IO, file extent
mapping, readpages, and writepages to use iomap.
- Remove buffer_head:
Completely removed buffer_head usage by converting to folios. As a
result, the dependency on CONFIG_BUFFER_HEAD has been removed from
Kconfig.
- Stability improvements:
The new ntfs driver passes 326 xfstests, compared to 273 for ntfs3.
All tests passed by ntfs3 are a complete subset of the tests passed
by this implementation. Added support for fallocate, idmapped
mounts, permissions, and more.
xfstests Results report:
Total tests run: 787
Passed : 326
Failed : 38
Skipped : 423
Failed tests breakdown:
- 34 tests require metadata journaling
- 4 other tests:
094: No unwritten extent concept in NTFS on-disk format
563: cgroup v2 aware writeback accounting not supported
631: RENAME_WHITEOUT support required
787: NFS delegation test"
Link: https://lore.kernel.org/all/da20d32b-5185-f40b-48b8-2986922d8b25@stargateuniverse.net/ [1]
[ Let's see if this undead filesystem ends up being of the "Easter
miracle" kind, or the "Nosferatu of filesystems" kind... ]
* tag 'ntfs-for-7.1-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/ntfs: (46 commits)
ntfs: remove redundant out-of-bound checks
ntfs: add bound checking to ntfs_external_attr_find
ntfs: add bound checking to ntfs_attr_find
ntfs: fix ignoring unreachable code warnings
ntfs: fix inconsistent indenting warnings
ntfs: fix variable dereferenced before check warnings
ntfs: prefer IS_ERR_OR_NULL() over manual NULL check
ntfs: harden ntfs_listxattr against EA entries
ntfs: harden ntfs_ea_lookup against malformed EA entries
ntfs: check $EA query-length in ntfs_ea_get
ntfs: validate WSL EA payload sizes
ntfs: fix WSL ea restore condition
ntfs: add missing newlines to pr_err() messages
ntfs: fix pointer/integer casting warnings
ntfs: use ->mft_no instead of ->i_ino in prints
ntfs: change mft_no type to u64
ntfs: select FS_IOMAP in Kconfig
ntfs: add MODULE_ALIAS_FS
ntfs: reduce stack usage in ntfs_write_mft_block()
ntfs: fix sysctl table registration and path
...
|
||
|
Linus Torvalds
|
87768582a4 |
dma-mapping updates for Linux 7.0:
- added support for batched cache sync, what improves performance of
dma_map/unmap_sg() operations on ARM64 architecture (Barry Song)
- introduced DMA_ATTR_CC_SHARED attribute for explicitly shared memory
used in confidential computing (Jiri Pirko)
- refactored spaghetti-like code in drivers/of/of_reserved_mem.c and its
clients (Marek Szyprowski, shared branch with device-tree updates to
avoid merge conflicts)
- prepared Contiguous Memory Allocator related code for making dma-buf
drivers modularized (Maxime Ripard)
- added support for benchmarking dma_map_sg() calls to tools/dma utility
(Qinxin Xia)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSrngzkoBtlA8uaaJ+Jp1EFxbsSRAUCaeCbdQAKCRCJp1EFxbsS
RHbWAQCt70dzrU0lu0omTR1HdDP4GTYfuM6nZR91e8/itGN1+QD/XH4I/0wuybzk
v5uxbIC6lR3abQRc3YNRXfi+i5j26A4=
=Oee2
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-7.1-2026-04-16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping updates from Marek Szyprowski:
- added support for batched cache sync, what improves performance of
dma_map/unmap_sg() operations on ARM64 architecture (Barry Song)
- introduced DMA_ATTR_CC_SHARED attribute for explicitly shared memory
used in confidential computing (Jiri Pirko)
- refactored spaghetti-like code in drivers/of/of_reserved_mem.c and
its clients (Marek Szyprowski, shared branch with device-tree updates
to avoid merge conflicts)
- prepared Contiguous Memory Allocator related code for making dma-buf
drivers modularized (Maxime Ripard)
- added support for benchmarking dma_map_sg() calls to tools/dma
utility (Qinxin Xia)
* tag 'dma-mapping-7.1-2026-04-16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux: (24 commits)
dma-buf: heaps: system: document system_cc_shared heap
dma-buf: heaps: system: add system_cc_shared heap for explicitly shared memory
dma-mapping: introduce DMA_ATTR_CC_SHARED for shared memory
mm: cma: Export cma_alloc(), cma_release() and cma_get_name()
dma: contiguous: Export dev_get_cma_area()
dma: contiguous: Make dma_contiguous_default_area static
dma: contiguous: Make dev_get_cma_area() a proper function
dma: contiguous: Turn heap registration logic around
of: reserved_mem: rework fdt_init_reserved_mem_node()
of: reserved_mem: clarify fdt_scan_reserved_mem*() functions
of: reserved_mem: rearrange code a bit
of: reserved_mem: replace CMA quirks by generic methods
of: reserved_mem: switch to ops based OF_DECLARE()
of: reserved_mem: use -ENODEV instead of -ENOENT
of: reserved_mem: remove fdt node from the structure
dma-mapping: fix false kernel-doc comment marker
dma-mapping: Support batch mode for dma_direct_{map,unmap}_sg
dma-mapping: Separate DMA sync issuing and completion waiting
arm64: Provide dcache_inval_poc_nosync helper
arm64: Provide dcache_clean_poc_nosync helper
...
|
||
|
Linus Torvalds
|
cb30bf881c |
tracing updates for v7.1:
- Fix printf format warning for bprintf
sunrpc uses a trace_printk() that triggers a printf warning during the
compile. Move the __printf() attribute around for when debugging is not
enabled the warning will go away.
- Remove redundant check for EVENT_FILE_FL_FREED in event_filter_write()
The FREED flag is checked in the call to event_file_file() and then
checked again right afterward, which is unneeded.
- Clean up event_file_file() and event_file_data() helpers
These helper functions played a different role in the past, but now with
eventfs, the READ_ONCE() isn't needed. Simplify the code a bit and also
add a warning to event_file_data() if the file or its data is not present.
- Remove updating file->private_data in tracing open
All access to the file private data is handled by the helper functions,
which do not use file->private_data. Stop updating it on open.
- Show ENUM names in function arguments via BTF in function tracing
When showing the function arguments when func-args option is set for
function tracing, if one of the arguments is found to be an enum, show the
name of the enum instead of its number.
- Add new trace_call__##name() API for tracepoints
Tracepoints are enabled via static_branch() blocks, where when not
enabled, there's only a nop that is in the code where the execution will
just skip over it. When tracing is enabled, the nop is converted to a
direct jump to the tracepoint code. Sometimes more calculations are
required to be performed to update the parameters of the tracepoint. In
this case, trace_##name##_enabled() is called which is a static_branch()
that gets enabled only when the tracepoint is enabled. This allows the
extra calculations to also be skipped by the nop:
if (trace_foo_enabled()) {
x = bar();
trace_foo(x);
}
Where the x=bar() is only performed when foo is enabled. The problem with
this approach is that there's now two static_branch() calls. One for
checking if the tracepoint is enabled, and then again to know if the
tracepoint should be called. The second one is redundant.
Introduce trace_call__foo() that will call the foo() tracepoint directly
without doing a static_branch():
if (trace_foo_enabled()) {
x = bar();
trace_call__foo();
}
- Update various locations to use the new trace_call__##name() API
- Move snapshot code out of trace.c
Cleaning up trace.c to not be a "dump all", move the snapshot code out of
it and into a new trace_snapshot.c file.
- Clean up some "%*.s" to "%*s"
- Allow boot kernel command line options to be called multiple times
Have options like:
ftrace_filter=foo ftrace_filter=bar ftrace_filter=zoo
Equal to:
ftrace_filter=foo,bar,zoo
- Fix ipi_raise event CPU field to be a CPU field
The ipi_raise target_cpus field is defined as a __bitmask(). There is now a
__cpumask() field definition. Update the field to use that.
- Have hist_field_name() use a snprintf() and not a series of strcat()
It's safer to use snprintf() that a series of strcat().
- Fix tracepoint regfunc balancing
A tracepoint can define a "reg" and "unreg" function that gets called
before the tracepoint is enabled, and after it is disabled respectively.
But on error, after the "reg" func is called and the tracepoint is not
enabled, the "unreg" function is not called to tear down what the "reg"
function performed.
- Fix output that shows what histograms are enabled
Event variables are displayed incorrectly in the histogram output.
Instead of "sched.sched_wakeup.$var", it is showing
"$sched.sched_wakeup.var" where the '$' is in the incorrect location.
- Some other simple cleanups.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaeCpvxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qt2WAP44m85BbAjBqJe4WR103eOXV+bREBta
dRoReKJOMe519gEAp0rK/HoCvHgHhIGe3gaGdIsNhnaxoFyNWMG/wokoLAY=
=Hg6+
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Fix printf format warning for bprintf
sunrpc uses a trace_printk() that triggers a printf warning during
the compile. Move the __printf() attribute around for when debugging
is not enabled the warning will go away
- Remove redundant check for EVENT_FILE_FL_FREED in
event_filter_write()
The FREED flag is checked in the call to event_file_file() and then
checked again right afterward, which is unneeded
- Clean up event_file_file() and event_file_data() helpers
These helper functions played a different role in the past, but now
with eventfs, the READ_ONCE() isn't needed. Simplify the code a bit
and also add a warning to event_file_data() if the file or its data
is not present
- Remove updating file->private_data in tracing open
All access to the file private data is handled by the helper
functions, which do not use file->private_data. Stop updating it on
open
- Show ENUM names in function arguments via BTF in function tracing
When showing the function arguments when func-args option is set for
function tracing, if one of the arguments is found to be an enum,
show the name of the enum instead of its number
- Add new trace_call__##name() API for tracepoints
Tracepoints are enabled via static_branch() blocks, where when not
enabled, there's only a nop that is in the code where the execution
will just skip over it. When tracing is enabled, the nop is converted
to a direct jump to the tracepoint code. Sometimes more calculations
are required to be performed to update the parameters of the
tracepoint. In this case, trace_##name##_enabled() is called which is
a static_branch() that gets enabled only when the tracepoint is
enabled. This allows the extra calculations to also be skipped by the
nop:
if (trace_foo_enabled()) {
x = bar();
trace_foo(x);
}
Where the x=bar() is only performed when foo is enabled. The problem
with this approach is that there's now two static_branch() calls. One
for checking if the tracepoint is enabled, and then again to know if
the tracepoint should be called. The second one is redundant
Introduce trace_call__foo() that will call the foo() tracepoint
directly without doing a static_branch():
if (trace_foo_enabled()) {
x = bar();
trace_call__foo();
}
- Update various locations to use the new trace_call__##name() API
- Move snapshot code out of trace.c
Cleaning up trace.c to not be a "dump all", move the snapshot code
out of it and into a new trace_snapshot.c file
- Clean up some "%*.s" to "%*s"
- Allow boot kernel command line options to be called multiple times
Have options like:
ftrace_filter=foo ftrace_filter=bar ftrace_filter=zoo
Equal to:
ftrace_filter=foo,bar,zoo
- Fix ipi_raise event CPU field to be a CPU field
The ipi_raise target_cpus field is defined as a __bitmask(). There is
now a __cpumask() field definition. Update the field to use that
- Have hist_field_name() use a snprintf() and not a series of strcat()
It's safer to use snprintf() that a series of strcat()
- Fix tracepoint regfunc balancing
A tracepoint can define a "reg" and "unreg" function that gets called
before the tracepoint is enabled, and after it is disabled
respectively. But on error, after the "reg" func is called and the
tracepoint is not enabled, the "unreg" function is not called to tear
down what the "reg" function performed
- Fix output that shows what histograms are enabled
Event variables are displayed incorrectly in the histogram output
Instead of "sched.sched_wakeup.$var", it is showing
"$sched.sched_wakeup.var" where the '$' is in the incorrect location
- Some other simple cleanups
* tag 'trace-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (24 commits)
selftests/ftrace: Add test case for fully-qualified variable references
tracing: Fix fully-qualified variable reference printing in histograms
tracepoint: balance regfunc() on func_add() failure in tracepoint_add_func()
tracing: Rebuild full_name on each hist_field_name() call
tracing: Report ipi_raise target CPUs as cpumask
tracing: Remove duplicate latency_fsnotify() stub
tracing: Preserve repeated trace_trigger boot parameters
tracing: Append repeated boot-time tracing parameters
tracing: Remove spurious default precision from show_event_trigger/filter formats
cpufreq: Use trace_call__##name() at guarded tracepoint call sites
tracing: Remove tracing_alloc_snapshot() when snapshot isn't defined
tracing: Move snapshot code out of trace.c and into trace_snapshot.c
mm: damon: Use trace_call__##name() at guarded tracepoint call sites
btrfs: Use trace_call__##name() at guarded tracepoint call sites
spi: Use trace_call__##name() at guarded tracepoint call sites
i2c: Use trace_call__##name() at guarded tracepoint call sites
kernel: Use trace_call__##name() at guarded tracepoint call sites
tracepoint: Add trace_call__##name() API
tracing: trace_mmap.h: fix a kernel-doc warning
tracing: Pretty-print enum parameters in function arguments
...
|
||
|
Linus Torvalds
|
01f492e181 |
Arm:
- Add support for tracing in the standalone EL2 hypervisor code, which should help both debugging and performance analysis. This uses the new infrastructure for 'remote' trace buffers that can be exposed by non-kernel entities such as firmware, and which came through the tracing tree. - Add support for GICv5 Per Processor Interrupts (PPIs), as the starting point for supporting the new GIC architecture in KVM. - Finally add support for pKVM protected guests, where pages are unmapped from the host as they are faulted into the guest and can be shared back from the guest using pKVM hypercalls. Protected guests are created using a new machine type identifier. As the elusive guestmem has not yet delivered on its promises, anonymous memory is also supported. This is only a first step towards full isolation from the host; for example, the CPU register state and DMA accesses are not yet isolated. Because this does not really yet bring fully what it promises, it is hidden behind CONFIG_ARM_PKVM_GUEST + 'kvm-arm.mode=protected', and also triggers TAINT_USER when a VM is created. Caveat emptor. - Rework the dreaded user_mem_abort() function to make it more maintainable, reducing the amount of state being exposed to the various helpers and rendering a substantial amount of state immutable. - Expand the Stage-2 page table dumper to support NV shadow page tables on a per-VM basis. - Tidy up the pKVM PSCI proxy code to be slightly less hard to follow. - Fix both SPE and TRBE in non-VHE configurations so that they do not generate spurious, out of context table walks that ultimately lead to very bad HW lockups. - A small set of patches fixing the Stage-2 MMU freeing in error cases. - Tighten-up accepted SMC immediate value to be only #0 for host SMCCC calls. - The usual cleanups and other selftest churn. LoongArch: - Use CSR_CRMD_PLV for kvm_arch_vcpu_in_kernel(). - Add DMSINTC irqchip in kernel support. RISC-V: - Fix steal time shared memory alignment checks - Fix vector context allocation leak - Fix array out-of-bounds in pmu_ctr_read() and pmu_fw_ctr_read_hi() - Fix double-free of sdata in kvm_pmu_clear_snapshot_area() - Fix integer overflow in kvm_pmu_validate_counter_mask() - Fix shift-out-of-bounds in make_xfence_request() - Fix lost write protection on huge pages during dirty logging - Split huge pages during fault handling for dirty logging - Skip CSR restore if VCPU is reloaded on the same core - Implement kvm_arch_has_default_irqchip() for KVM selftests - Factored-out ISA checks into separate sources - Added hideleg to struct kvm_vcpu_config - Factored-out VCPU config into separate sources - Support configuration of per-VM HGATP mode from KVM user space s390: - Support for ESA (31-bit) guests inside nested hypervisors. - Remove restriction on memslot alignment, which is not needed anymore with the new gmap code. - Fix LPSW/E to update the bear (which of course is the breaking event address register). x86: - Shut up various UBSAN warnings on reading module parameter before they were initialized. - Don't zero-allocate page tables that are used for splitting hugepages in the TDP MMU, as KVM is guaranteed to set all SPTEs in the page table and thus write all bytes. - As an optimization, bail early when trying to unsync 4KiB mappings if the target gfn can just be mapped with a 2MiB hugepage. x86 generic: - Copy single-chunk MMIO write values into struct kvm_vcpu (more precisely struct kvm_mmio_fragment) to fix use-after-free stack bugs where KVM would dereference stack pointer after an exit to userspace. - Clean up and comment the emulated MMIO code to try to make it easier to maintain (not necessarily "easy", but "easier"). - Move VMXON+VMXOFF and EFER.SVME toggling out of KVM (not *all* of VMX and SVM enabling) as it is needed for trusted I/O. - Advertise support for AVX512 Bit Matrix Multiply (BMM) instructions - Immediately fail the build if a required #define is missing in one of KVM's headers that is included multiple times. - Reject SET_GUEST_DEBUG with -EBUSY if there's an already injected exception, mostly to prevent syzkaller from abusing the uAPI to trigger WARNs, but also because it can help prevent userspace from unintentionally crashing the VM. - Exempt SMM from CPUID faulting on Intel, as per the spec. - Misc hardening and cleanup changes. x86 (AMD): - Fix and optimize IRQ window inhibit handling for AVIC; make it per-vCPU so that KVM doesn't prematurely re-enable AVIC if multiple vCPUs have to-be-injected IRQs. - Clean up and optimize the OSVW handling, avoiding a bug in which KVM would overwrite state when enabling virtualization on multiple CPUs in parallel. This should not be a problem because OSVW should usually be the same for all CPUs. - Drop a WARN in KVM_MEMORY_ENCRYPT_REG_REGION where KVM complains about a "too large" size based purely on user input. - Clean up and harden the pinning code for KVM_MEMORY_ENCRYPT_REG_REGION. - Disallow synchronizing a VMSA of an already-launched/encrypted vCPU, as doing so for an SNP guest will crash the host due to an RMP violation page fault. - Overhaul KVM's APIs for detecting SEV+ guests so that VM-scoped queries are required to hold kvm->lock, and enforce it by lockdep. Fix various bugs where sev_guest() was not ensured to be stable for the whole duration of a function or ioctl. - Convert a pile of kvm->lock SEV code to guard(). - Play nicer with userspace that does not enable KVM_CAP_EXCEPTION_PAYLOAD, for which KVM needs to set CR2 and DR6 as a response to ioctls such as KVM_GET_VCPU_EVENTS (even if the payload would end up in EXITINFO2 rather than CR2, for example). Only set CR2 and DR6 when consumption of the payload is imminent, but on the other hand force delivery of the payload in all paths where userspace retrieves CR2 or DR6. - Use vcpu->arch.cr2 when updating vmcb12's CR2 on nested #VMEXIT instead of vmcb02->save.cr2. The value is out of sync after a save/restore or after a #PF is injected into L2. - Fix a class of nSVM bugs where some fields written by the CPU are not synchronized from vmcb02 to cached vmcb12 after VMRUN, and so are not up-to-date when saved by KVM_GET_NESTED_STATE. - Fix a class of bugs where the ordering between KVM_SET_NESTED_STATE and KVM_SET_{S}REGS could cause vmcb02 to be incorrectly initialized after save+restore. - Add a variety of missing nSVM consistency checks. - Fix several bugs where KVM failed to correctly update VMCB fields on nested #VMEXIT. - Fix several bugs where KVM failed to correctly synthesize #UD or #GP for SVM-related instructions. - Add support for save+restore of virtualized LBRs (on SVM). - Refactor various helpers and macros to improve clarity and (hopefully) make the code easier to maintain. - Aggressively sanitize fields when copying from vmcb12, to guard against unintentionally allowing L1 to utilize yet-to-be-defined features. - Fix several bugs where KVM botched rAX legality checks when emulating SVM instructions. There are remaining issues in that KVM doesn't handle size prefix overrides for 64-bit guests. - Fail emulation of VMRUN/VMLOAD/VMSAVE if mapping vmcb12 fails instead of somewhat arbitrarily synthesizing #GP (i.e. don't double down on AMD's architectural but sketchy behavior of generating #GP for "unsupported" addresses). - Cache all used vmcb12 fields to further harden against TOCTOU bugs. x86 (Intel): - Drop obsolete branch hint prefixes from the VMX instruction macros. - Use ASM_INPUT_RM() in __vmcs_writel() to coerce clang into using a register input when appropriate. - Code cleanups. guest_memfd: - Don't mark guest_memfd folios as accessed, as guest_memfd doesn't support reclaim, the memory is unevictable, and there is no storage to write back to. LoongArch selftests: - Add KVM PMU test cases s390 selftests: - Enable more memory selftests. x86 selftests: - Add support for Hygon CPUs in KVM selftests. - Fix a bug in the MSR test where it would get false failures on AMD/Hygon CPUs with exactly one of RDPID or RDTSCP. - Add an MADV_COLLAPSE testcase for guest_memfd as a regression test for a bug where the kernel would attempt to collapse guest_memfd folios against KVM's will. -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmnftRQUHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroPAzwf+NKO4Ktv+7A22ImN0SBl0nlUuulsz vTcw3+hxdRoIw83GdNS+hG5js0wrpMDnbv3t4+VliDNBSSxrBzcSWX2wpilW0Xtw qGo1MWhs2lKPy1NlaRVOwPS6j7uF3AR0TQ1iQLGMedQuCU9WpiKJxyhNXJdbLrt3 8EgFzsvtEsv+jKNRUNDf9+d0j4gZsFyIe+Brhianbw+u3/UCiUClLCdsKPc4+5ZX 08otYXytacGNIf/5Ev1vT4pHkHL0yqKXAtX7LEtaS3+0KrPuLjV4slemivzE9vf5 Evafm5AhA4wpaNMb1ZerhY3T94lsMaJpWxotjR//0Q7C9B59pCQnXCm8mg== =CcE0 -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm updates from Paolo Bonzini: "Arm: - Add support for tracing in the standalone EL2 hypervisor code, which should help both debugging and performance analysis. This uses the new infrastructure for 'remote' trace buffers that can be exposed by non-kernel entities such as firmware, and which came through the tracing tree - Add support for GICv5 Per Processor Interrupts (PPIs), as the starting point for supporting the new GIC architecture in KVM - Finally add support for pKVM protected guests, where pages are unmapped from the host as they are faulted into the guest and can be shared back from the guest using pKVM hypercalls. Protected guests are created using a new machine type identifier. As the elusive guestmem has not yet delivered on its promises, anonymous memory is also supported This is only a first step towards full isolation from the host; for example, the CPU register state and DMA accesses are not yet isolated. Because this does not really yet bring fully what it promises, it is hidden behind CONFIG_ARM_PKVM_GUEST + 'kvm-arm.mode=protected', and also triggers TAINT_USER when a VM is created. Caveat emptor - Rework the dreaded user_mem_abort() function to make it more maintainable, reducing the amount of state being exposed to the various helpers and rendering a substantial amount of state immutable - Expand the Stage-2 page table dumper to support NV shadow page tables on a per-VM basis - Tidy up the pKVM PSCI proxy code to be slightly less hard to follow - Fix both SPE and TRBE in non-VHE configurations so that they do not generate spurious, out of context table walks that ultimately lead to very bad HW lockups - A small set of patches fixing the Stage-2 MMU freeing in error cases - Tighten-up accepted SMC immediate value to be only #0 for host SMCCC calls - The usual cleanups and other selftest churn LoongArch: - Use CSR_CRMD_PLV for kvm_arch_vcpu_in_kernel() - Add DMSINTC irqchip in kernel support RISC-V: - Fix steal time shared memory alignment checks - Fix vector context allocation leak - Fix array out-of-bounds in pmu_ctr_read() and pmu_fw_ctr_read_hi() - Fix double-free of sdata in kvm_pmu_clear_snapshot_area() - Fix integer overflow in kvm_pmu_validate_counter_mask() - Fix shift-out-of-bounds in make_xfence_request() - Fix lost write protection on huge pages during dirty logging - Split huge pages during fault handling for dirty logging - Skip CSR restore if VCPU is reloaded on the same core - Implement kvm_arch_has_default_irqchip() for KVM selftests - Factored-out ISA checks into separate sources - Added hideleg to struct kvm_vcpu_config - Factored-out VCPU config into separate sources - Support configuration of per-VM HGATP mode from KVM user space s390: - Support for ESA (31-bit) guests inside nested hypervisors - Remove restriction on memslot alignment, which is not needed anymore with the new gmap code - Fix LPSW/E to update the bear (which of course is the breaking event address register) x86: - Shut up various UBSAN warnings on reading module parameter before they were initialized - Don't zero-allocate page tables that are used for splitting hugepages in the TDP MMU, as KVM is guaranteed to set all SPTEs in the page table and thus write all bytes - As an optimization, bail early when trying to unsync 4KiB mappings if the target gfn can just be mapped with a 2MiB hugepage x86 generic: - Copy single-chunk MMIO write values into struct kvm_vcpu (more precisely struct kvm_mmio_fragment) to fix use-after-free stack bugs where KVM would dereference stack pointer after an exit to userspace - Clean up and comment the emulated MMIO code to try to make it easier to maintain (not necessarily "easy", but "easier") - Move VMXON+VMXOFF and EFER.SVME toggling out of KVM (not *all* of VMX and SVM enabling) as it is needed for trusted I/O - Advertise support for AVX512 Bit Matrix Multiply (BMM) instructions - Immediately fail the build if a required #define is missing in one of KVM's headers that is included multiple times - Reject SET_GUEST_DEBUG with -EBUSY if there's an already injected exception, mostly to prevent syzkaller from abusing the uAPI to trigger WARNs, but also because it can help prevent userspace from unintentionally crashing the VM - Exempt SMM from CPUID faulting on Intel, as per the spec - Misc hardening and cleanup changes x86 (AMD): - Fix and optimize IRQ window inhibit handling for AVIC; make it per-vCPU so that KVM doesn't prematurely re-enable AVIC if multiple vCPUs have to-be-injected IRQs - Clean up and optimize the OSVW handling, avoiding a bug in which KVM would overwrite state when enabling virtualization on multiple CPUs in parallel. This should not be a problem because OSVW should usually be the same for all CPUs - Drop a WARN in KVM_MEMORY_ENCRYPT_REG_REGION where KVM complains about a "too large" size based purely on user input - Clean up and harden the pinning code for KVM_MEMORY_ENCRYPT_REG_REGION - Disallow synchronizing a VMSA of an already-launched/encrypted vCPU, as doing so for an SNP guest will crash the host due to an RMP violation page fault - Overhaul KVM's APIs for detecting SEV+ guests so that VM-scoped queries are required to hold kvm->lock, and enforce it by lockdep. Fix various bugs where sev_guest() was not ensured to be stable for the whole duration of a function or ioctl - Convert a pile of kvm->lock SEV code to guard() - Play nicer with userspace that does not enable KVM_CAP_EXCEPTION_PAYLOAD, for which KVM needs to set CR2 and DR6 as a response to ioctls such as KVM_GET_VCPU_EVENTS (even if the payload would end up in EXITINFO2 rather than CR2, for example). Only set CR2 and DR6 when consumption of the payload is imminent, but on the other hand force delivery of the payload in all paths where userspace retrieves CR2 or DR6 - Use vcpu->arch.cr2 when updating vmcb12's CR2 on nested #VMEXIT instead of vmcb02->save.cr2. The value is out of sync after a save/restore or after a #PF is injected into L2 - Fix a class of nSVM bugs where some fields written by the CPU are not synchronized from vmcb02 to cached vmcb12 after VMRUN, and so are not up-to-date when saved by KVM_GET_NESTED_STATE - Fix a class of bugs where the ordering between KVM_SET_NESTED_STATE and KVM_SET_{S}REGS could cause vmcb02 to be incorrectly initialized after save+restore - Add a variety of missing nSVM consistency checks - Fix several bugs where KVM failed to correctly update VMCB fields on nested #VMEXIT - Fix several bugs where KVM failed to correctly synthesize #UD or #GP for SVM-related instructions - Add support for save+restore of virtualized LBRs (on SVM) - Refactor various helpers and macros to improve clarity and (hopefully) make the code easier to maintain - Aggressively sanitize fields when copying from vmcb12, to guard against unintentionally allowing L1 to utilize yet-to-be-defined features - Fix several bugs where KVM botched rAX legality checks when emulating SVM instructions. There are remaining issues in that KVM doesn't handle size prefix overrides for 64-bit guests - Fail emulation of VMRUN/VMLOAD/VMSAVE if mapping vmcb12 fails instead of somewhat arbitrarily synthesizing #GP (i.e. don't double down on AMD's architectural but sketchy behavior of generating #GP for "unsupported" addresses) - Cache all used vmcb12 fields to further harden against TOCTOU bugs x86 (Intel): - Drop obsolete branch hint prefixes from the VMX instruction macros - Use ASM_INPUT_RM() in __vmcs_writel() to coerce clang into using a register input when appropriate - Code cleanups guest_memfd: - Don't mark guest_memfd folios as accessed, as guest_memfd doesn't support reclaim, the memory is unevictable, and there is no storage to write back to LoongArch selftests: - Add KVM PMU test cases s390 selftests: - Enable more memory selftests x86 selftests: - Add support for Hygon CPUs in KVM selftests - Fix a bug in the MSR test where it would get false failures on AMD/Hygon CPUs with exactly one of RDPID or RDTSCP - Add an MADV_COLLAPSE testcase for guest_memfd as a regression test for a bug where the kernel would attempt to collapse guest_memfd folios against KVM's will" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (373 commits) KVM: x86: use inlines instead of macros for is_sev_*guest x86/virt: Treat SVM as unsupported when running as an SEV+ guest KVM: SEV: Goto an existing error label if charging misc_cg for an ASID fails KVM: SVM: Move lock-protected allocation of SEV ASID into a separate helper KVM: SEV: use mutex guard in snp_handle_guest_req() KVM: SEV: use mutex guard in sev_mem_enc_unregister_region() KVM: SEV: use mutex guard in sev_mem_enc_ioctl() KVM: SEV: use mutex guard in snp_launch_update() KVM: SEV: Assert that kvm->lock is held when querying SEV+ support KVM: SEV: Document that checking for SEV+ guests when reclaiming memory is "safe" KVM: SEV: Hide "struct kvm_sev_info" behind CONFIG_KVM_AMD_SEV=y KVM: SEV: WARN on unhandled VM type when initializing VM KVM: LoongArch: selftests: Add PMU overflow interrupt test KVM: LoongArch: selftests: Add basic PMU event counting test KVM: LoongArch: selftests: Add cpucfg read/write helpers LoongArch: KVM: Add DMSINTC inject msi to vCPU LoongArch: KVM: Add DMSINTC device support LoongArch: KVM: Make vcpu_is_preempted() as a macro rather than function LoongArch: KVM: Move host CSR_GSTAT save and restore in context switch LoongArch: KVM: Move host CSR_EENTRY save and restore in context switch ... |
||
|
Linus Torvalds
|
87fe97a184 |
fwctl 7.1 merge window pull request
- New fwctl driver for Broadcom RDMA NICs - Bug fix for non-modular builds -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaeDp6gAKCRCFwuHvBreF YXiBAQCUW1N0n7iTqlkbdbCs3GsI0d78x2dDN7aEc7SKDr/+CgEA69TVKDTLkIJa CAzwZLkAKjRDUH7PXh65i8svJnwvzAk= =MoNI -----END PGP SIGNATURE----- Merge tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/fwctl/fwctl Pull fwctl updates from Jason Gunthorpe: - New fwctl driver for Broadcom RDMA NICs - Bug fix for non-modular builds * tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/fwctl/fwctl: fwctl: Fix class init ordering to avoid NULL pointer dereference on device removal fwctl/bnxt_fwctl: Add documentation entries fwctl/bnxt_fwctl: Add bnxt fwctl device fwctl/bnxt_en: Create an aux device for fwctl fwctl/bnxt_en: Refactor aux bus functions to be more generic fwctl/bnxt_en: Move common definitions to include/linux/bnxt/ |
||
|
Linus Torvalds
|
f0bf3eac92 |
VFIO updates for v7.1-rc1
- Update QAT vfio-pci variant driver for Gen 5, 420xx devices.
(Vijay Sundar Selvamani, Suman Kumar Chakraborty, Giovanni Cabiddu)
- Fix vfio selftest MMIO DMA mapping selftest. (Alex Mastro)
- Conversions to const struct class in support of class_create()
deprecation. (Jori Koolstra)
- Improve selftest compiler compatibility by avoiding initializer
on variable-length array. (Manish Honap)
- Define new uAPI for drivers supporting migration to advise user-
space of new initial data for reducing target startup latency.
Implemented for mlx5 vfio-pci variant driver. (Yishai Hadas)
- Enable vfio selftests on aarch64, not just cross-compiles reporting
arm64. (Ted Logan)
- Update vfio selftest driver support to include additional DSA
devices. (Yi Lai)
- Unconditionally include debugfs root pointer in vfio device struct,
avoiding a build failure seen in hisi_acc variant driver without
debugfs otherwise. (Arnd Bergmann)
- Add support for the s390 ISM (Internal Shared Memory) device via
a new variant driver. The device is unique in the size of its BAR
space (256TiB) and lack of mmap support. (Julian Ruess)
- Enforce that vfio-pci drivers implement a name in their ops
structure for use in sequestering SR-IOV VFs. (Alex Williamson)
- Prune leftover group notifier code. (Paolo Bonzini)
- Fix Xe vfio-pci variant driver to avoid migration support as a
dependency in the reset path and missing release call.
(Michał Winiarski)
-----BEGIN PGP SIGNATURE-----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=NYEM
-----END PGP SIGNATURE-----
Merge tag 'vfio-v7.1-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Update QAT vfio-pci variant driver for Gen 5, 420xx devices (Vijay
Sundar Selvamani, Suman Kumar Chakraborty, Giovanni Cabiddu)
- Fix vfio selftest MMIO DMA mapping selftest (Alex Mastro)
- Conversions to const struct class in support of class_create()
deprecation (Jori Koolstra)
- Improve selftest compiler compatibility by avoiding initializer on
variable-length array (Manish Honap)
- Define new uAPI for drivers supporting migration to advise user-
space of new initial data for reducing target startup latency.
Implemented for mlx5 vfio-pci variant driver (Yishai Hadas)
- Enable vfio selftests on aarch64, not just cross-compiles reporting
arm64 (Ted Logan)
- Update vfio selftest driver support to include additional DSA devices
(Yi Lai)
- Unconditionally include debugfs root pointer in vfio device struct,
avoiding a build failure seen in hisi_acc variant driver without
debugfs otherwise (Arnd Bergmann)
- Add support for the s390 ISM (Internal Shared Memory) device via a
new variant driver. The device is unique in the size of its BAR space
(256TiB) and lack of mmap support (Julian Ruess)
- Enforce that vfio-pci drivers implement a name in their ops structure
for use in sequestering SR-IOV VFs (Alex Williamson)
- Prune leftover group notifier code (Paolo Bonzini)
- Fix Xe vfio-pci variant driver to avoid migration support as a
dependency in the reset path and missing release call (Michał
Winiarski)
* tag 'vfio-v7.1-rc1' of https://github.com/awilliam/linux-vfio: (23 commits)
vfio/xe: Add a missing vfio_pci_core_release_dev()
vfio/xe: Reorganize the init to decouple migration from reset
vfio: remove dead notifier code
vfio/pci: Require vfio_device_ops.name
MAINTAINERS: add VFIO ISM PCI DRIVER section
vfio/ism: Implement vfio_pci driver for ISM devices
vfio/pci: Rename vfio_config_do_rw() to vfio_pci_config_rw_single() and export it
vfio: unhide vdev->debug_root
vfio/qat: add support for Intel QAT 420xx VFs
vfio: selftests: Support DMR and GNR-D DSA devices
vfio: selftests: Build tests on aarch64
vfio/mlx5: Add REINIT support to VFIO_MIG_GET_PRECOPY_INFO
vfio/mlx5: consider inflight SAVE during PRE_COPY
net/mlx5: Add IFC bits for migration state
vfio: Adapt drivers to use the core helper vfio_check_precopy_ioctl
vfio: Add support for VFIO_DEVICE_FEATURE_MIG_PRECOPY_INFOv2
vfio: Define uAPI for re-init initial bytes during the PRE_COPY phase
vfio: selftests: Fix VLA initialisation in vfio_pci_irq_set()
vfio: uapi: fix comment typo
vfio: mdev: replace mtty_dev->vd_class with a const struct class
...
|
||
|
Linus Torvalds
|
e4bf304f00 |
ring-buffer updates for 7.1:
- Add remote buffers for pKVM
pKVM has a hypervisor component that is used to protect the guest from the
host kernel. This hypervisor is a black box to the kernel as the kernel is
to user space. The remote buffers are used to have a memory mapping
between the hypervisor and the kernel where kernel may send commands to
enable tracing within the hypervisor. Then the kernel will read this
memory mapping just like user space can read the memory mapped ring buffer
of the kernel tracing system.
Since the hypervisor only has a single context, it doesn't need to worry
about races between normal context, interrupt context and NMIs like the
kernel does. The ring buffer it uses doesn't need to be as complex. The
remote buffers are a simple version of the ring buffer that works in a
single context. They are still per-CPU and use sub buffers. The data
layout is the same as the kernel's ring buffer to share the same parsing.
Currently, only ARM64 implements pKVM, but there's work to implement it
also in x86. The remote buffer code is separated out from the ARM
implementation so that it can be used in the future by x86.
The ARM64 updates for pKVM is in the ARM/KVM tree and it merged in the
remote buffers of this tree.
- Merge commit
|
||
|
Linus Torvalds
|
aec2f682d4 |
This update includes the following changes:
API:
- Replace crypto_get_default_rng with crypto_stdrng_get_bytes.
- Remove simd skcipher support.
- Allow algorithm types to be disabled when CRYPTO_SELFTESTS is off.
Algorithms:
- Remove CPU-based des/3des acceleration.
- Add test vectors for authenc(hmac(md5),cbc(aes)).
- Add test vectors for authenc(hmac(md5),cbc(des)).
- Add test vectors for authenc(hmac(md5),rfc3686(ctr(aes))).
- Add test vectors for authenc(hmac(sha1),rfc3686(ctr(aes))).
- Add test vectors for authenc(hmac(sha224),rfc3686(ctr(aes))).
- Add test vectors for authenc(hmac(sha256),rfc3686(ctr(aes))).
- Add test vectors for authenc(hmac(sha384),rfc3686(ctr(aes))).
- Add test vectors for authenc(hmac(sha512),rfc3686(ctr(aes))).
- Replace spin lock with mutex in jitterentropy.
Drivers:
- Add authenc algorithms to safexcel.
- Add support for zstd in qat.
- Add wireless mode support for QAT GEN6.
- Add anti-rollback support for QAT GEN6.
- Add support for ctr(aes), gcm(aes), and ccm(aes) in dthev2.
-----BEGIN PGP SIGNATURE-----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=KoAB
-----END PGP SIGNATURE-----
Merge tag 'v7.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Replace crypto_get_default_rng with crypto_stdrng_get_bytes
- Remove simd skcipher support
- Allow algorithm types to be disabled when CRYPTO_SELFTESTS is off
Algorithms:
- Remove CPU-based des/3des acceleration
- Add test vectors for authenc(hmac(md5),cbc({aes,des})) and
authenc(hmac({md5,sha1,sha224,sha256,sha384,sha512}),rfc3686(ctr(aes)))
- Replace spin lock with mutex in jitterentropy
Drivers:
- Add authenc algorithms to safexcel
- Add support for zstd in qat
- Add wireless mode support for QAT GEN6
- Add anti-rollback support for QAT GEN6
- Add support for ctr(aes), gcm(aes), and ccm(aes) in dthev2"
* tag 'v7.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (129 commits)
crypto: af_alg - use sock_kmemdup in alg_setkey_by_key_serial
crypto: vmx - remove CRYPTO_DEV_VMX from Kconfig
crypto: omap - convert reqctx buffer to fixed-size array
crypto: atmel-sha204a - add Thorsten Blum as maintainer
crypto: atmel-ecc - add Thorsten Blum as maintainer
crypto: qat - fix IRQ cleanup on 6xxx probe failure
crypto: geniv - Remove unused spinlock from struct aead_geniv_ctx
crypto: qce - simplify qce_xts_swapiv()
crypto: hisilicon - Fix dma_unmap_single() direction
crypto: talitos - rename first/last to first_desc/last_desc
crypto: talitos - fix SEC1 32k ahash request limitation
crypto: jitterentropy - replace long-held spinlock with mutex
crypto: hisilicon - remove unused and non-public APIs for qm and sec
crypto: hisilicon/qm - drop redundant variable initialization
crypto: hisilicon/qm - remove else after return
crypto: hisilicon/qm - add const qualifier to info_name in struct qm_cmd_dump_item
crypto: hisilicon - fix the format string type error
crypto: ccree - fix a memory leak in cc_mac_digest()
crypto: qat - add support for zstd
crypto: qat - use swab32 macro
...
|
||
|
Linus Torvalds
|
f1d26d72f0 |
IOMMU Updates for Linux v7.1:
Including:
- Core:
- Support for RISC-V IO-page-table format in generic iommupt
code
- ARM-SMMU Updates:
- Introduction of an "invalidation array" for SMMUv3, which enables
future scalability work and optimisations for devices with a large
number of SMMUv3 instances.
- Update the conditions under which the SMMUv3 driver works around
hardware errata for invalidation on MMU-700 implementations.
- Fix broken command filtering for the host view of NVIDIA's "cmdqv"
SMMUv3 extension.
- MMU-500 device-tree binding additions for Qualcomm Eliza & Hawi SoCs.
- Intel VT-d:
- Support for dirty tracking on domains attached to PASID
- Removal of unnecessary read*()/write*() wrappers
- Improvements to the invalidation paths
- AMD Vi:
- Race-condition fixed in debugfs code
- Make log buffer allocation NUMA aware
- RISC-V:
- IO-TLB flushing improvements
- Minor fixes
-----BEGIN PGP SIGNATURE-----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=T6YT
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core:
- Support for RISC-V IO-page-table format in generic iommupt code
ARM-SMMU Updates:
- Introduction of an "invalidation array" for SMMUv3, which enables
future scalability work and optimisations for devices with a large
number of SMMUv3 instances
- Update the conditions under which the SMMUv3 driver works around
hardware errata for invalidation on MMU-700 implementations
- Fix broken command filtering for the host view of NVIDIA's "cmdqv"
SMMUv3 extension
- MMU-500 device-tree binding additions for Qualcomm Eliza & Hawi
SoCs
Intel VT-d:
- Support for dirty tracking on domains attached to PASID
- Removal of unnecessary read*()/write*() wrappers
- Improvements to the invalidation paths
AMD Vi:
- Race-condition fixed in debugfs code
- Make log buffer allocation NUMA aware
RISC-V:
- IO-TLB flushing improvements
- Minor fixes"
* tag 'iommu-updates-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (48 commits)
iommu/vt-d: Restore IOMMU_CAP_CACHE_COHERENCY
dt-bindings: arm-smmu: qcom: Add compatible for Hawi SoC
iommu/amd: Invalidate IRT cache for DMA aliases
iommu/riscv: Remove overflows on the invalidation path
iommu/amd: Fix clone_alias() to use the original device's devid
iommu/vt-d: Remove the remaining pages along the invalidation path
iommu/vt-d: Pass size_order to qi_desc_piotlb() not npages
iommu/vt-d: Split piotlb invalidation into range and all
iommu/vt-d: Remove dmar_writel() and dmar_writeq()
iommu/vt-d: Remove dmar_readl() and dmar_readq()
iommufd/selftest: Test dirty tracking on PASID
iommu/vt-d: Support dirty tracking on PASID
iommu/vt-d: Rename device_set_dirty_tracking() and pass dmar_domain pointer
iommu/vt-d: Block PASID attachment to nested domain with dirty tracking
iommu/dma: Always allow DMA-FQ when iommupt provides the iommu_domain
iommu/riscv: Fix signedness bug
iommu/amd: Fix illegal cap/mmio access in IOMMU debugfs
iommu/amd: Fix illegal device-id access in IOMMU debugfs
iommu/tegra241-cmdqv: Update uAPI to clarify HYP_OWN requirement
iommu/tegra241-cmdqv: Set supports_cmd op in tegra241_vcmdq_hw_init()
...
|
||
|
Linus Torvalds
|
4a57e0913e |
drm for v7.1-rc1
mm: - two pass MMU interval notifiers - add gpu active/reclaim per-node stat counters math: - provide __KERNEL_DIV_ROUND_CLOSEST() in UAPI - implement DIV_ROUND_CLOSEST() with __KERNEL_DIV_ROUND_CLOSEST() rust: - shared tag with driver-core: register macro and io infra - core: rework DMA coherent API - core: add interop::list to interop with C linked lists - core: add more num::Bounded operations - core: enable generic_arg_infer and add EMSGSIZE - workqueue: add ARef<T> support for work and delayed work - add GPU buddy allocator abstraction - add DRM shmem GEM helper abstraction - allow drm:::Device to dispatch work and delayed work items to driver private data - add dma_resv_lock helper and raw accessors core: - introduce DRM RAS infrastructure over netlink - add connector panel_type property - fourcc: add ARM interleaved 64k modifier - colorop: add destroy helper - suballoc: split into alloc and init helpers - mode: provide DRM_ARGB_GET*() macros for reading color components edid: - provide drm_output_color_Format dma-buf: - provide revoke mechanism for shared buffers - rename move_notify to invalidate_mappings - always enable move_notify - protect dma_fence_ops with RCU and improve locking - clean pages with helpers atomic: - allocate drm_private_state via callback - helper: use system_percpu_wq buddy: - make buddy allocator available to gpu level - add kernel-doc for buddy allocator - improve aligned allocation ttm: - fix fence signalling - improve tests and docs - improve handling of gfp_retry_mayfail - use per-node stat counters to track memory allocations - port pool to use list_lru - drop NUMA specific pools - make pool shrinker numa aware - track allocated pages per numa node coreboot: - cleanup coreboot framebuffer support sched: - fix race condition in drm_sched_fini pagemap: - enable THP support - pass pagemap_addr by reference gem-shmem: - Track page accessed/dirty status across mmap/vmap gpusvm: - reenable device to device migration - fix unbalanced unclock bridge: - anx7625: Support USB-C plus DT bindings - connector: Fix EDID detection - dw-hdmi-qp: Support Vendor-Specfic and SDP Infoframes; improve others - fsl-ldb: Fix visual artifacts plus related DT property 'enable-termination-resistor' - imx8qxp-pixel-link: Improve bridge reference handling - lt9611: Support Port-B-only input plus DT bindings - tda998x: Support DRM_BRIDGE_ATTACH_NO_CONNECTOR; Clean up - Support TH1520 HDMI plus DT bindings - waveshare-dsi: Fix register and attach; Support 1..4 DSI lanes plus DT bindings - anx7625: Fix USB Type-C handling - cdns-mhdp8546-core: Handle HDCP state in bridge atomic_check - Support Lontium LT8713SX DP MST bridge plus DT bindings - analogix_dp: Use DP helpers for link training panel: - panel-jdi-lt070me05000: Use mipi-dsi multi functions - panel-edp: Support Add AUO B116XAT04.1 (HW: 1A); Support CMN N116BCL-EAK (C2); Support FriendlyELEC plus DT changes - panel-edp: Fix timings for BOE NV140WUM-N64 - ilitek-ili9882t: Allow GPIO calls to sleep - jadard: Support TAIGUAN XTI05101-01A - lxd: Support LXD M9189A plus DT bindings - mantix: Fix pixel clock; Clean up - motorola: Support Motorola Atrix 4G and Droid X2 plus DT bindings - novatek: Support Novatek/Tianma NT37700F plus DT bindings - simple: Support EDT ET057023UDBA plus DT bindings; Support Powertip PH800480T032-ZHC19 plus DT bindings; Support Waveshare 13.3" - novatek-nt36672a: Use mipi_dsi_*_multi() functions - panel-edp: Support BOE NV153WUM-N42, CMN N153JCA-ELK, CSW MNF307QS3-2 - support Himax HX83121A plus DT bindings - support JuTouch JT070TM041 plus DT bindings - support Samsung S6E8FC0 plus DT bindings - himax-hx83102c: support Samsung S6E8FC0 plus DT bindings; support backlight - ili9806e: support Rocktech RK050HR345-CT106A plus DT bindings - simple: support Tianma TM050RDH03 plus DT bindings amdgpu: - enable DC by default on CIK APUs - userq fence ioctl param size fixes - set panel_type to OLED for eDP - refactor DC i2c code - FAMS2 update - rework ttm handling to allow multiple engines - DC DCE 6.x cleanup - DC support for NUTMEG/TRAVIS DP bridge - DCN 4.2 support - GC12 idle power fix for compute - use struct drm_edid in non-DC code - enable NV12/P010 support on primary planes - support newer IP discovery tables - VCN/JPEG 5.0.2 support - GC/MES 12.1 updates - USERQ fixes - add DC idle state manager - eDP DSC seamless boot amdkfd: - GC 12.1 updates - non 4K page fixes xe: - basic Xe3p_LPG and NVL-P enabling patches - allow VM_BIND decompress support - add purgeable buffer object support - add xe_vm_get_property_ioctl - restrict multi-lrc to VCS/VECS engines - allow disabling VM overcommit in fault mode - dGPU memory optimizations - Workaround cleanups and simplification - Allow VFs VRAM quote changes using sysfs - convert GT stats to per-cpu counters - pagefault refactors - enable multi-queue on xe3p_xpc - disable DCC on PTL - make MMIO communication more robust - disable D3Cold for BMG on specific platforms - vfio: improve FLR sync for Xe VFIO i915/display: - C10/C20/LT PHY PLL divider verification - use trans push mechanism to generate PSR frame change on LNL+ - refactor DP DSC slice config - VGA decode refactoring - refactor DPT, gen2-4 overlay, masked field register macro helpers - refactor stolen memory allocation decisions - prepare for UHBR DP tunnels - refactor LT PHY PLL to use DPLL framework - implement register polling/waiting in display code - add shared stepping header between i915 and display i915: - fix potential overflow of shmem scatterlist length nouveau: - provide Z cull info to userspace - initial GA100 support - shutdown on PCI device shutdown nova-core: - harden GSP command queue - add support for large RPCs - simplify GSP sequencer and message handling - refactor falcon firmware handling - convert to new register macro - conver to new DMA coherent API - use checked arithmetic - add debugfs support for gsp-rm log buffers - fix aux device registration for multi-GPU msm: - CI: - Uprev mesa - Restore CI jobs for Qualcomm APQ8016 and APQ8096 devices - Core: - Switched to of_get_available_child_by_name() - DPU: - Fixes for DSC panels - Fixed brownout because of the frequency / OPP mismatch - Quad pipe preparation (not enabled yet) - Switched to virtual planes by default - Dropped VBIF_NRT support - Added support for Eliza platform - Reworked alpha handling - Switched to correct CWB definitions on Eliza - Dropped dummy INTF_0 on MSM8953 - Corrected INTFs related to DP-MST - DP: - Removed debug prints looking into PHY internals - DSI: - Fixes for DSC panels - RGB101010 support - Support for SC8280XP - Moved PHY bindings from display/ to phy/ - GPU: - Preemption support for x2-85 and a840 - IFPC support for a840 - SKU detection support for x2-85 and a840 - Expose AQE support (VK ray-pipeline) - Avoid locking in VM_BIND fence signaling path - Fix to avoid reclaim in GPU snapshot path - Disallow foreign mapping of _NO_SHARE BOs - HDMI: - Fixed infoframes programming - MDP5: - Dropped support for MSM8974v1 - Dropped now unused code for MSM8974 v1 and SDM660 / MSM8998 panthor: - add tracepoints for power and IRQs - fix fence handling - extend timestamp query with flags - support various sources for timestamp queries tyr: - fix names and model/versions rockchip: - vop2: use drm logging function - rk3576 displayport support - support CRTC background color atmel-hlcdc: - support sana5d65 LCD controller tilcdc: - use DT bindings schema - use managed DRM interfaces - support DRM_BRIDGE_ATTACH_NO_CONNECTOR verisilicon: - support DC8200 + DT bindings virtgpu: - support PRIME import with 3D enabled komeda: - fix integer overflow in AFBC checks mcde: - improve bridge handling gma500: - use drm client buffer for fbdev framebuffer amdxdna: - add sensors ioctls - provide NPU power estimate - support column utilization sensor - allow forcing DMA through IOMMU IOVA - support per-BO mem usage queries - refactor GEM implementation ivpu: - update boot API to v3.29.4 - limit per-user number of doorbells/contexts - perform engine reset on TDR error loongson: - replace custom code with drm_gem_ttm_dumb_map_offset() imx: - support planes behind the primary plane - fix bus-format selection vkms: - support CRTC background color v3d: - improve handling of struct v3d_stats komeda: - support Arm China Linlon D6 plus DT bindings imagination: - improve power-off sequence - support context-reset notification from firmware mediatek: - mtk_dsi: enable hs clock during pre-enable - Remove all conflicting aperture devices during probe - Add support for mt8167 display blocks -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmnfMHMACgkQDHTzWXnE hr4gEg/+Oaf6KBcvqNKPLwDlNeOvHap1n8oiy7SXvOKN2/KEAu/zGpEciJ7GsSge qdqY4xhEfp0JZLrTZiIIzFr38uzkanfOLdF2AQCVrfCRhlO7QLiUDxAAdDZUyINe kKLvNunxMwhzwsmRHEDL85cgPkhsxt2ux+tUOYZrEQ/ZbdupNrFw9q5ewmuYzGng HY8bsnB0jVwQ9IU/X6h+Xzr/19623/CZyUWJSuY1foKMhHMceyrCmpAFEqjFWn71 7zNYFlPEQtqa6qtIZXVbJB4mhd7NbmMW6s367xx+Sx+UJDDNfS6ku+hpISwxNuVX 7fOoEkhQ+ynIcxGkfOi5Q9j2/mV/WL/GEA/IUWfmX8l219WOrKY4w0NtCE4C78r7 QFGUR6w8Vi97FCP8NuA7Kix4J9eSr/FAzqoG0snAOQbVdaTSBr1hL0PeewD8BRry PUkCCh6J7jKA6POt4JZeU6mbJ3AMoOwS9BICi10R1R6EnIKNpKGVpAuYHk4B5+u3 X5vd1ds+8dJN/etaFYgIbirUocKx6zt9rT5i4/wPZIDPoCgZNofePtPCiJoTcnNN PUZUngcWLpftwW+kCUdc4lF1Q7nguQpXVpX0WJiSfqejshUTPXHPlmJV81GoNSHo fQMUXIjO5cAX0FKPBakSxxwFnOQFq4aZb6kRBt4lYgt+RJfzo3s= =GX7Q -----END PGP SIGNATURE----- Merge tag 'drm-next-2026-04-15' of https://gitlab.freedesktop.org/drm/kernel Pull drm updates from Dave Airlie: "Highlights: - new DRM RAS infrastructure using netlink - amdgpu: enable DC on CIK APUs, and more IP enablement, and more user queue work - xe: purgeable BO support, and new hw enablement - dma-buf : add revocable operations Full summary: mm: - two-pass MMU interval notifiers - add gpu active/reclaim per-node stat counters math: - provide __KERNEL_DIV_ROUND_CLOSEST() in UAPI - implement DIV_ROUND_CLOSEST() with __KERNEL_DIV_ROUND_CLOSEST() rust: - shared tag with driver-core: register macro and io infra - core: rework DMA coherent API - core: add interop::list to interop with C linked lists - core: add more num::Bounded operations - core: enable generic_arg_infer and add EMSGSIZE - workqueue: add ARef<T> support for work and delayed work - add GPU buddy allocator abstraction - add DRM shmem GEM helper abstraction - allow drm:::Device to dispatch work and delayed work items to driver private data - add dma_resv_lock helper and raw accessors core: - introduce DRM RAS infrastructure over netlink - add connector panel_type property - fourcc: add ARM interleaved 64k modifier - colorop: add destroy helper - suballoc: split into alloc and init helpers - mode: provide DRM_ARGB_GET*() macros for reading color components edid: - provide drm_output_color_Format dma-buf: - provide revoke mechanism for shared buffers - rename move_notify to invalidate_mappings - always enable move_notify - protect dma_fence_ops with RCU and improve locking - clean pages with helpers atomic: - allocate drm_private_state via callback - helper: use system_percpu_wq buddy: - make buddy allocator available to gpu level - add kernel-doc for buddy allocator - improve aligned allocation ttm: - fix fence signalling - improve tests and docs - improve handling of gfp_retry_mayfail - use per-node stat counters to track memory allocations - port pool to use list_lru - drop NUMA specific pools - make pool shrinker numa aware - track allocated pages per numa node coreboot: - cleanup coreboot framebuffer support sched: - fix race condition in drm_sched_fini pagemap: - enable THP support - pass pagemap_addr by reference gem-shmem: - Track page accessed/dirty status across mmap/vmap gpusvm: - reenable device to device migration - fix unbalanced unclock bridge: - anx7625: Support USB-C plus DT bindings - connector: Fix EDID detection - dw-hdmi-qp: Support Vendor-Specfic and SDP Infoframes; improve others - fsl-ldb: Fix visual artifacts plus related DT property 'enable-termination-resistor' - imx8qxp-pixel-link: Improve bridge reference handling - lt9611: Support Port-B-only input plus DT bindings - tda998x: Support DRM_BRIDGE_ATTACH_NO_CONNECTOR; Clean up - Support TH1520 HDMI plus DT bindings - waveshare-dsi: Fix register and attach; Support 1..4 DSI lanes plus DT bindings - anx7625: Fix USB Type-C handling - cdns-mhdp8546-core: Handle HDCP state in bridge atomic_check - Support Lontium LT8713SX DP MST bridge plus DT bindings - analogix_dp: Use DP helpers for link training panel: - panel-jdi-lt070me05000: Use mipi-dsi multi functions - panel-edp: Support Add AUO B116XAT04.1 (HW: 1A); Support CMN N116BCL-EAK (C2); Support FriendlyELEC plus DT changes - panel-edp: Fix timings for BOE NV140WUM-N64 - ilitek-ili9882t: Allow GPIO calls to sleep - jadard: Support TAIGUAN XTI05101-01A - lxd: Support LXD M9189A plus DT bindings - mantix: Fix pixel clock; Clean up - motorola: Support Motorola Atrix 4G and Droid X2 plus DT bindings - novatek: Support Novatek/Tianma NT37700F plus DT bindings - simple: Support EDT ET057023UDBA plus DT bindings; Support Powertip PH800480T032-ZHC19 plus DT bindings; Support Waveshare 13.3" - novatek-nt36672a: Use mipi_dsi_*_multi() functions - panel-edp: Support BOE NV153WUM-N42, CMN N153JCA-ELK, CSW MNF307QS3-2 - support Himax HX83121A plus DT bindings - support JuTouch JT070TM041 plus DT bindings - support Samsung S6E8FC0 plus DT bindings - himax-hx83102c: support Samsung S6E8FC0 plus DT bindings; support backlight - ili9806e: support Rocktech RK050HR345-CT106A plus DT bindings - simple: support Tianma TM050RDH03 plus DT bindings amdgpu: - enable DC by default on CIK APUs - userq fence ioctl param size fixes - set panel_type to OLED for eDP - refactor DC i2c code - FAMS2 update - rework ttm handling to allow multiple engines - DC DCE 6.x cleanup - DC support for NUTMEG/TRAVIS DP bridge - DCN 4.2 support - GC12 idle power fix for compute - use struct drm_edid in non-DC code - enable NV12/P010 support on primary planes - support newer IP discovery tables - VCN/JPEG 5.0.2 support - GC/MES 12.1 updates - USERQ fixes - add DC idle state manager - eDP DSC seamless boot amdkfd: - GC 12.1 updates - non 4K page fixes xe: - basic Xe3p_LPG and NVL-P enabling patches - allow VM_BIND decompress support - add purgeable buffer object support - add xe_vm_get_property_ioctl - restrict multi-lrc to VCS/VECS engines - allow disabling VM overcommit in fault mode - dGPU memory optimizations - Workaround cleanups and simplification - Allow VFs VRAM quote changes using sysfs - convert GT stats to per-cpu counters - pagefault refactors - enable multi-queue on xe3p_xpc - disable DCC on PTL - make MMIO communication more robust - disable D3Cold for BMG on specific platforms - vfio: improve FLR sync for Xe VFIO i915/display: - C10/C20/LT PHY PLL divider verification - use trans push mechanism to generate PSR frame change on LNL+ - refactor DP DSC slice config - VGA decode refactoring - refactor DPT, gen2-4 overlay, masked field register macro helpers - refactor stolen memory allocation decisions - prepare for UHBR DP tunnels - refactor LT PHY PLL to use DPLL framework - implement register polling/waiting in display code - add shared stepping header between i915 and display i915: - fix potential overflow of shmem scatterlist length nouveau: - provide Z cull info to userspace - initial GA100 support - shutdown on PCI device shutdown nova-core: - harden GSP command queue - add support for large RPCs - simplify GSP sequencer and message handling - refactor falcon firmware handling - convert to new register macro - conver to new DMA coherent API - use checked arithmetic - add debugfs support for gsp-rm log buffers - fix aux device registration for multi-GPU msm: - CI: - Uprev mesa - Restore CI jobs for Qualcomm APQ8016 and APQ8096 devices - Core: - Switched to of_get_available_child_by_name() - DPU: - Fixes for DSC panels - Fixed brownout because of the frequency / OPP mismatch - Quad pipe preparation (not enabled yet) - Switched to virtual planes by default - Dropped VBIF_NRT support - Added support for Eliza platform - Reworked alpha handling - Switched to correct CWB definitions on Eliza - Dropped dummy INTF_0 on MSM8953 - Corrected INTFs related to DP-MST - DP: - Removed debug prints looking into PHY internals - DSI: - Fixes for DSC panels - RGB101010 support - Support for SC8280XP - Moved PHY bindings from display/ to phy/ - GPU: - Preemption support for x2-85 and a840 - IFPC support for a840 - SKU detection support for x2-85 and a840 - Expose AQE support (VK ray-pipeline) - Avoid locking in VM_BIND fence signaling path - Fix to avoid reclaim in GPU snapshot path - Disallow foreign mapping of _NO_SHARE BOs - HDMI: - Fixed infoframes programming - MDP5: - Dropped support for MSM8974v1 - Dropped now unused code for MSM8974 v1 and SDM660 / MSM8998 panthor: - add tracepoints for power and IRQs - fix fence handling - extend timestamp query with flags - support various sources for timestamp queries tyr: - fix names and model/versions rockchip: - vop2: use drm logging function - rk3576 displayport support - support CRTC background color atmel-hlcdc: - support sana5d65 LCD controller tilcdc: - use DT bindings schema - use managed DRM interfaces - support DRM_BRIDGE_ATTACH_NO_CONNECTOR verisilicon: - support DC8200 + DT bindings virtgpu: - support PRIME import with 3D enabled komeda: - fix integer overflow in AFBC checks mcde: - improve bridge handling gma500: - use drm client buffer for fbdev framebuffer amdxdna: - add sensors ioctls - provide NPU power estimate - support column utilization sensor - allow forcing DMA through IOMMU IOVA - support per-BO mem usage queries - refactor GEM implementation ivpu: - update boot API to v3.29.4 - limit per-user number of doorbells/contexts - perform engine reset on TDR error loongson: - replace custom code with drm_gem_ttm_dumb_map_offset() imx: - support planes behind the primary plane - fix bus-format selection vkms: - support CRTC background color v3d: - improve handling of struct v3d_stats komeda: - support Arm China Linlon D6 plus DT bindings imagination: - improve power-off sequence - support context-reset notification from firmware mediatek: - mtk_dsi: enable hs clock during pre-enable - Remove all conflicting aperture devices during probe - Add support for mt8167 display blocks" * tag 'drm-next-2026-04-15' of https://gitlab.freedesktop.org/drm/kernel: (1735 commits) drm/ttm/tests: Remove checks from ttm_pool_free_no_dma_alloc drm/ttm/tests: fix lru_count ASSERT drm/vram: remove DRM_VRAM_MM_FILE_OPERATIONS from docs drm/fb-helper: Fix a locking bug in an error path dma-fence: correct kernel-doc function parameter @flags ttm/pool: track allocated_pages per numa node. ttm/pool: make pool shrinker NUMA aware (v2) ttm/pool: drop numa specific pools ttm/pool: port to list_lru. (v2) drm/ttm: use gpu mm stats to track gpu memory allocations. (v4) mm: add gpu active/reclaim per-node stat counters (v2) gpu: nova-core: fix missing colon in SEC2 boot debug message gpu: nova-core: vbios: use from_le_bytes() for PCI ROM header parsing gpu: nova-core: bitfield: fix broken Default implementation gpu: nova-core: falcon: pad firmware DMA object size to required block alignment gpu: nova-core: gsp: fix undefined behavior in command queue code drm/shmem_helper: Make sure PMD entries get the writeable upgrade accel/ivpu: Trigger recovery on TDR with OS scheduling drm/msm: Use of_get_available_child_by_name() dt-bindings: display/msm: move DSI PHY bindings to phy/ subdir ... |
||
|
Linus Torvalds
|
7c8a4671dc |
vfs-7.1-rc1.mount.v2
Please consider pulling these changes from the signed vfs-7.1-rc1.mount.v2 tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCad3vFgAKCRCRxhvAZXjc
onXwAQDwEGvpMUUiuI/JWFqCA5vY5LXXr/36wdcs0iUL1uy9IgEAyOdnYhYkcaX1
3lm87f6OmYkhlq6enJbco7uT4CUzlQA=
=1Ls8
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.1-rc1.mount.v2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
- Add FSMOUNT_NAMESPACE flag to fsmount() that creates a new mount
namespace with the newly created filesystem attached to a copy of the
real rootfs. This returns a namespace file descriptor instead of an
O_PATH mount fd, similar to how OPEN_TREE_NAMESPACE works for
open_tree().
This allows creating a new filesystem and immediately placing it in a
new mount namespace in a single operation, which is useful for
container runtimes and other namespace-based isolation mechanisms.
This accompanies OPEN_TREE_NAMESPACE and avoids a needless detour via
OPEN_TREE_NAMESPACE to get the same effect. Will be especially useful
when you mount an actual filesystem to be used as the container
rootfs.
- Currently, creating a new mount namespace always copies the entire
mount tree from the caller's namespace. For containers and sandboxes
that intend to build their mount table from scratch this is wasteful:
they inherit a potentially large mount tree only to immediately tear
it down.
This series adds support for creating a mount namespace that contains
only a clone of the root mount, with none of the child mounts. Two
new flags are introduced:
- CLONE_EMPTY_MNTNS (0x400000000) for clone3(), using the 64-bit flag space
- UNSHARE_EMPTY_MNTNS (0x00100000) for unshare()
Both flags imply CLONE_NEWNS. The resulting namespace contains a
single nullfs root mount with an immutable empty directory. The
intended workflow is to then mount a real filesystem (e.g., tmpfs)
over the root and build the mount table from there.
- Allow MOVE_MOUNT_BENEATH to target the caller's rootfs, allowing to
switch out the rootfs without pivot_root(2).
The traditional approach to switching the rootfs involves
pivot_root(2) or a chroot_fs_refs()-based mechanism that atomically
updates fs->root for all tasks sharing the same fs_struct. This has
consequences for fork(), unshare(CLONE_FS), and setns().
This series instead decomposes root-switching into individually
atomic, locally-scoped steps:
fd_tree = open_tree(-EBADF, "/newroot", OPEN_TREE_CLONE | OPEN_TREE_CLOEXEC);
fchdir(fd_tree);
move_mount(fd_tree, "", AT_FDCWD, "/", MOVE_MOUNT_BENEATH | MOVE_MOUNT_F_EMPTY_PATH);
chroot(".");
umount2(".", MNT_DETACH);
Since each step only modifies the caller's own state, the
fork/unshare/setns races are eliminated by design.
A key step to making this possible is to remove the locked mount
restriction. Originally MOVE_MOUNT_BENEATH doesn't support mounting
beneath a mount that is locked. The locked mount protects the
underlying mount from being revealed. This is a core mechanism of
unshare(CLONE_NEWUSER | CLONE_NEWNS). The mounts in the new mount
namespace become locked. That effectively makes the new mount table
useless as the caller cannot ever get rid of any of the mounts no
matter how useless they are.
We can lift this restriction though. We simply transfer the locked
property from the top mount to the mount beneath. This works because
what we care about is to protect the underlying mount aka the parent.
The mount mounted between the parent and the top mount takes over the
job of protecting the parent mount from the top mount mount. This
leaves us free to remove the locked property from the top mount which
can consequently be unmounted:
unshare(CLONE_NEWUSER | CLONE_NEWNS)
and we inherit a clone of procfs on /proc then currently we cannot
unmount it as:
umount -l /proc
will fail with EINVAL because the procfs mount is locked.
After this series we can now do:
mount --beneath -t tmpfs tmpfs /proc
umount -l /proc
after which a tmpfs mount has been placed beneath the procfs mount.
The tmpfs mount has become locked and the procfs mount has become
unlocked.
This means you can safely modify an inherited mount table after
unprivileged namespace creation.
Afterwards we simply make it possible to move a mount beneath the
rootfs allowing to upgrade the rootfs.
Removing the locked restriction makes this very useful for containers
created with unshare(CLONE_NEWUSER | CLONE_NEWNS) to reshuffle an
inherited mount table safely and MOVE_MOUNT_BENEATH makes it possible
to switch out the rootfs instead of using the costly pivot_root(2).
* tag 'vfs-7.1-rc1.mount.v2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests/namespaces: remove unused utils.h include from listns_efault_test
selftests/fsmount_ns: add missing TARGETS and fix cap test
selftests/empty_mntns: fix wrong CLONE_EMPTY_MNTNS hex value in comment
selftests/empty_mntns: fix statmount_alloc() signature mismatch
selftests/statmount: remove duplicate wait_for_pid()
mount: always duplicate mount
selftests/filesystems: add MOVE_MOUNT_BENEATH rootfs tests
move_mount: allow MOVE_MOUNT_BENEATH on the rootfs
move_mount: transfer MNT_LOCKED
selftests/filesystems: add clone3 tests for empty mount namespaces
selftests/filesystems: add tests for empty mount namespaces
namespace: allow creating empty mount namespaces
selftests: add FSMOUNT_NAMESPACE tests
selftests/statmount: add statmount_alloc() helper
tools: update mount.h header
mount: add FSMOUNT_NAMESPACE
mount: simplify __do_loopback()
mount: start iterating from start of rbtree
|
||
|
Linus Torvalds
|
91a4855d6c |
Networking changes for 7.1.
Core & protocols
----------------
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP.
- Number of code moves to help the compiler with inlining.
Avoid output arguments for returning drop reason where possible.
- Rework drop handling within qdiscs to include more metadata
about the reason and dropping qdisc in the tracepoints.
- Remove the rtnl_lock use from IP Multicast Routing.
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two.
- Report TCP delayed ack timer information via socket diag.
- Add ip_local_port_step_width sysctl to allow distributing the randomly
selected ports more evenly throughout the allowed space.
- Add support for per-route tunsrc in IPv6 segment routing.
- Start work of switching sockopt handling to iov_iter.
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up.
- Support MSG_EOR in MPTCP.
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage.
- Remove UDP-Lite support (as announced in 2023).
- Remove support for building IPv6 as a module.
Remove the now unnecessary function calling indirection.
Cross-tree stuff
----------------
- Move Michael MIC code from generic crypto into wireless,
it's considered insecure but some WiFi networks still need it.
Netfilter
---------
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate.
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex.
- Add more opinionated input validation to lower security exposure.
- Make IPVS hash tables to be per-netns and resizable.
Wireless
--------
- Finished assoc frame encryption/EPPKE/802.1X-over-auth.
- Radar detection improvements.
- Add 6 GHz incumbent signal detection APIs.
- Multi-link support for FILS, probe response templates and
client probing.
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware.
Driver API
----------
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs.
- Add standard counters for reporting pause storm events
(implement in mlx5 and fbnic).
- Add configuration API for completion writeback buffering
(implement in mana).
- Support driver-initiated change of RSS context sizes.
- Support DPLL monitoring input frequency (implement in zl3073x).
- Support per-port resources in devlink (implement in mlx5).
Misc
----
- Expand the YAML spec for Netfilter.
Drivers
-------
- Software:
- macvlan: support multicast rx for bridge ports with shared source
MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EhQZ
-----END PGP SIGNATURE-----
Merge tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP
- Number of code moves to help the compiler with inlining. Avoid
output arguments for returning drop reason where possible
- Rework drop handling within qdiscs to include more metadata about
the reason and dropping qdisc in the tracepoints
- Remove the rtnl_lock use from IP Multicast Routing
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two
- Report TCP delayed ack timer information via socket diag
- Add ip_local_port_step_width sysctl to allow distributing the
randomly selected ports more evenly throughout the allowed space
- Add support for per-route tunsrc in IPv6 segment routing
- Start work of switching sockopt handling to iov_iter
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up
- Support MSG_EOR in MPTCP
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage
- Remove UDP-Lite support (as announced in 2023)
- Remove support for building IPv6 as a module. Remove the now
unnecessary function calling indirection
Cross-tree stuff:
- Move Michael MIC code from generic crypto into wireless, it's
considered insecure but some WiFi networks still need it
Netfilter:
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex
- Add more opinionated input validation to lower security exposure
- Make IPVS hash tables to be per-netns and resizable
Wireless:
- Finished assoc frame encryption/EPPKE/802.1X-over-auth
- Radar detection improvements
- Add 6 GHz incumbent signal detection APIs
- Multi-link support for FILS, probe response templates and client
probing
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
Driver API:
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs
- Add standard counters for reporting pause storm events (implement
in mlx5 and fbnic)
- Add configuration API for completion writeback buffering (implement
in mana)
- Support driver-initiated change of RSS context sizes
- Support DPLL monitoring input frequency (implement in zl3073x)
- Support per-port resources in devlink (implement in mlx5)
Misc:
- Expand the YAML spec for Netfilter
Drivers
- Software:
- macvlan: support multicast rx for bridge ports with shared
source MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB
pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support"
* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wireguard: allowedips: remove redundant space
tools: ynl: add sample for wireguard
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
MAINTAINERS: Add netkit selftest files
selftests/net: Add additional test coverage in nk_qlease
selftests/net: Split netdevsim tests from HW tests in nk_qlease
tools/ynl: Make YnlFamily closeable as a context manager
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
net: airoha: Fix VIP configuration for AN7583 SoC
net: caif: clear client service pointer on teardown
net: strparser: fix skb_head leak in strp_abort_strp()
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
selftests/bpf: add test for xdp_master_redirect with bond not up
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
sctp: disable BH before calling udp_tunnel_xmit_skb()
sctp: fix missing encap_port propagation for GSO fragments
net: airoha: Rely on net_device pointer in ETS callbacks
...
|
||
|
Linus Torvalds
|
f5ad410100 |
bpf-next-7.1
-----BEGIN PGP SIGNATURE-----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=k6te
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Welcome new BPF maintainers: Kumar Kartikeya Dwivedi, Eduard
Zingerman while Martin KaFai Lau reduced his load to Reviwer.
- Lots of fixes everywhere from many first time contributors. Thank you
All.
- Diff stat is dominated by mechanical split of verifier.c into
multiple components:
- backtrack.c: backtracking logic and jump history
- states.c: state equivalence
- cfg.c: control flow graph, postorder, strongly connected
components
- liveness.c: register and stack liveness
- fixups.c: post-verification passes: instruction patching, dead
code removal, bpf_loop inlining, finalize fastcall
8k line were moved. verifier.c still stands at 20k lines.
Further refactoring is planned for the next release.
- Replace dynamic stack liveness with static stack liveness based on
data flow analysis.
This improved the verification time by 2x for some programs and
equally reduced memory consumption. New logic is in liveness.c and
supported by constant folding in const_fold.c (Eduard Zingerman,
Alexei Starovoitov)
- Introduce BTF layout to ease addition of new BTF kinds (Alan Maguire)
- Use kmalloc_nolock() universally in BPF local storage (Amery Hung)
- Fix several bugs in linked registers delta tracking (Daniel Borkmann)
- Improve verifier support of arena pointers (Emil Tsalapatis)
- Improve verifier tracking of register bounds in min/max and tnum
domains (Harishankar Vishwanathan, Paul Chaignon, Hao Sun)
- Further extend support for implicit arguments in the verifier (Ihor
Solodrai)
- Add support for nop,nop5 instruction combo for USDT probes in libbpf
(Jiri Olsa)
- Support merging multiple module BTFs (Josef Bacik)
- Extend applicability of bpf_kptr_xchg (Kaitao Cheng)
- Retire rcu_trace_implies_rcu_gp() (Kumar Kartikeya Dwivedi)
- Support variable offset context access for 'syscall' programs (Kumar
Kartikeya Dwivedi)
- Migrate bpf_task_work and dynptr to kmalloc_nolock() (Mykyta
Yatsenko)
- Fix UAF in in open-coded task_vma iterator (Puranjay Mohan)
* tag 'bpf-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (241 commits)
selftests/bpf: cover short IPv4/IPv6 inputs with adjust_room
bpf: reject short IPv4/IPv6 inputs in bpf_prog_test_run_skb
selftests/bpf: Use memfd_create instead of shm_open in cgroup_iter_memcg
selftests/bpf: Add test for cgroup storage OOB read
bpf: Fix OOB in pcpu_init_value
selftests/bpf: Fix reg_bounds to match new tnum-based refinement
selftests/bpf: Add tests for non-arena/arena operations
bpf: Allow instructions with arena source and non-arena dest registers
bpftool: add missing fsession to the usage and docs of bpftool
docs/bpf: add missing fsession attach type to docs
bpf: add missing fsession to the verifier log
bpf: Move BTF checking logic into check_btf.c
bpf: Move backtracking logic to backtrack.c
bpf: Move state equivalence logic to states.c
bpf: Move check_cfg() into cfg.c
bpf: Move compute_insn_live_regs() into liveness.c
bpf: Move fixup/post-processing logic from verifier.c into fixups.c
bpf: Simplify do_check_insn()
bpf: Move checks for reserved fields out of the main pass
bpf: Delete unused variable
...
|
||
|
Linus Torvalds
|
88b29f3f57 |
Modules changes for v7.1-rc1
Kernel symbol flags:
- Replace the separate *_gpl symbol sections (__ksymtab_gpl and
__kcrctab_gpl) with a unified symbol table and a new
__kflagstab section. This section stores symbol flags, such as
the GPL-only flag, as an 8-bit bitset for each exported symbol.
This is a cleanup that simplifies symbol lookup in the module
loader by avoiding table fragmentation and will allow a cleaner
way to add more flags later if needed.
Module signature UAPI:
- Move struct module_signature to the UAPI headers to allow reuse
by tools outside the kernel proper, such as kmod and
scripts/sign-file. This also renames a few constants for clarity
and drops unused signature types as preparation for hash-based
module integrity checking work that's in progress.
Sysfs:
- Add a /sys/module/<module>/import_ns sysfs attribute to show
the symbol namespaces imported by loaded modules. This makes it
easier to verify driver API access at runtime on systems that
care about such things (e.g. Android).
Cleanups and fixes:
- Force sh_addr to 0 for all sections in module.lds. This prevents
non-zero section addresses when linking modules with ld.bfd -r,
which confused elfutils.
- Fix a memory leak of charp module parameters on module unload
when the kernel is configured with CONFIG_SYSFS=n.
- Override the -EEXIST error code returned by module_init() to
userspace. This prevents confusion with the errno reserved by
the module loader to indicate that a module is already loaded.
- Simplify the warning message and drop the stack dump on positive
returns from module_init().
- Drop unnecessary extern keywords from function declarations and
synchronize parse_args() arguments with their implementation.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSE9au1u/dCZerzchhaByWrOaGnegUCadmI0gAKCRBaByWrOaGn
euC6AQCpeQGQv/Z1Pu9DmBRaRD1MjXg1K1J8DN3qH7L8FbWDwAD9FtzAHw9GPOOP
0aQpDvcYKjdrU8OiuqtENvhzCV1RTA4=
=YaHp
-----END PGP SIGNATURE-----
Merge tag 'modules-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull module updates from Sami Tolvanen:
"Kernel symbol flags:
- Replace the separate *_gpl symbol sections (__ksymtab_gpl and
__kcrctab_gpl) with a unified symbol table and a new __kflagstab
section.
This section stores symbol flags, such as the GPL-only flag, as an
8-bit bitset for each exported symbol. This is a cleanup that
simplifies symbol lookup in the module loader by avoiding table
fragmentation and will allow a cleaner way to add more flags later
if needed.
Module signature UAPI:
- Move struct module_signature to the UAPI headers to allow reuse by
tools outside the kernel proper, such as kmod and
scripts/sign-file.
This also renames a few constants for clarity and drops unused
signature types as preparation for hash-based module integrity
checking work that's in progress.
Sysfs:
- Add a /sys/module/<module>/import_ns sysfs attribute to show the
symbol namespaces imported by loaded modules.
This makes it easier to verify driver API access at runtime on
systems that care about such things (e.g. Android).
Cleanups and fixes:
- Force sh_addr to 0 for all sections in module.lds. This prevents
non-zero section addresses when linking modules with 'ld.bfd -r',
which confused elfutils.
- Fix a memory leak of charp module parameters on module unload when
the kernel is configured with CONFIG_SYSFS=n.
- Override the -EEXIST error code returned by module_init() to
userspace. This prevents confusion with the errno reserved by the
module loader to indicate that a module is already loaded.
- Simplify the warning message and drop the stack dump on positive
returns from module_init().
- Drop unnecessary extern keywords from function declarations and
synchronize parse_args() arguments with their implementation"
* tag 'modules-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux: (23 commits)
module: Simplify warning on positive returns from module_init()
module: Override -EEXIST module return
documentation: remove references to *_gpl sections
module: remove *_gpl sections from vmlinux and modules
module: deprecate usage of *_gpl sections in module loader
module: use kflagstab instead of *_gpl sections
module: populate kflagstab in modpost
module: add kflagstab section to vmlinux and modules
module: define ksym_flags enumeration to represent kernel symbol flags
selftests/bpf: verify_pkcs7_sig: Use 'struct module_signature' from the UAPI headers
sign-file: use 'struct module_signature' from the UAPI headers
tools uapi headers: add linux/module_signature.h
module: Move 'struct module_signature' to UAPI
module: Give MODULE_SIG_STRING a more descriptive name
module: Give 'enum pkey_id_type' a more specific name
module: Drop unused signature types
extract-cert: drop unused definition of PKEY_ID_PKCS7
docs: symbol-namespaces: mention sysfs attribute
module: expose imported namespaces via sysfs
module: Remove extern keyword from param prototypes
...
|
||
|
Linus Torvalds
|
1c3b68f0d5 |
Scheduler changes for v7.1:
Fair scheduling updates:
- Skip SCHED_IDLE rq for SCHED_IDLE tasks (Christian Loehle)
- Remove superfluous rcu_read_lock() in the wakeup path (K Prateek Nayak)
- Simplify the entry condition for update_idle_cpu_scan() (K Prateek Nayak)
- Simplify SIS_UTIL handling in select_idle_cpu() (K Prateek Nayak)
- Avoid overflow in enqueue_entity() (K Prateek Nayak)
- Update overutilized detection (Vincent Guittot)
- Prevent negative lag increase during delayed dequeue (Vincent Guittot)
- Clear buddies for preempt_short (Vincent Guittot)
- Implement more complex proportional newidle balance (Peter Zijlstra)
- Increase weight bits for avg_vruntime (Peter Zijlstra)
- Use full weight to __calc_delta() (Peter Zijlstra)
RT and DL scheduling updates:
- Fix incorrect schedstats for rt and dl thread (Dengjun Su)
- Skip group schedulable check with rt_group_sched=0 (Michal Koutný)
- Move group schedulability check to sched_rt_global_validate()
(Michal Koutný)
- Add reporting of runtime left & abs deadline to sched_getattr()
for DEADLINE tasks (Tommaso Cucinotta)
Scheduling topology updates by K Prateek Nayak:
- Compute sd_weight considering cpuset partitions
- Extract "imb_numa_nr" calculation into a separate helper
- Allocate per-CPU sched_domain_shared in s_data
- Switch to assigning "sd->shared" from s_data
- Remove sched_domain_shared allocation with sd_data
Energy-aware scheduling updates:
- Filter false overloaded_group case for EAS (Vincent Guittot)
- PM: EM: Switch to rcu_dereference_all() in wakeup path
(Dietmar Eggemann)
Infrastructure updates:
- Replace use of system_unbound_wq with system_dfl_wq (Marco Crivellari)
Proxy scheduling updates by John Stultz:
- Make class_schedulers avoid pushing current, and get rid of proxy_tag_curr()
- Minimise repeated sched_proxy_exec() checking
- Fix potentially missing balancing with Proxy Exec
- Fix and improve task::blocked_on et al handling
- Add assert_balance_callbacks_empty() helper
- Add logic to zap balancing callbacks if we pick again
- Move attach_one_task() and attach_task() helpers to sched.h
- Handle blocked-waiter migration (and return migration)
- Add K Prateek Nayak to scheduler reviewers for proxy execution
Misc cleanups and fixes by John Stultz, Joseph Salisbury,
Peter Zijlstra, K Prateek Nayak, Michal Koutný, Randy Dunlap,
Shrikanth Hegde, Vincent Guittot, Zhan Xusheng, Xie Yuanbin
and Vincent Guittot.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=NjyS
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Fair scheduling updates:
- Skip SCHED_IDLE rq for SCHED_IDLE tasks (Christian Loehle)
- Remove superfluous rcu_read_lock() in the wakeup path (K Prateek Nayak)
- Simplify the entry condition for update_idle_cpu_scan() (K Prateek Nayak)
- Simplify SIS_UTIL handling in select_idle_cpu() (K Prateek Nayak)
- Avoid overflow in enqueue_entity() (K Prateek Nayak)
- Update overutilized detection (Vincent Guittot)
- Prevent negative lag increase during delayed dequeue (Vincent Guittot)
- Clear buddies for preempt_short (Vincent Guittot)
- Implement more complex proportional newidle balance (Peter Zijlstra)
- Increase weight bits for avg_vruntime (Peter Zijlstra)
- Use full weight to __calc_delta() (Peter Zijlstra)
RT and DL scheduling updates:
- Fix incorrect schedstats for rt and dl thread (Dengjun Su)
- Skip group schedulable check with rt_group_sched=0 (Michal Koutný)
- Move group schedulability check to sched_rt_global_validate()
(Michal Koutný)
- Add reporting of runtime left & abs deadline to sched_getattr()
for DEADLINE tasks (Tommaso Cucinotta)
Scheduling topology updates by K Prateek Nayak:
- Compute sd_weight considering cpuset partitions
- Extract "imb_numa_nr" calculation into a separate helper
- Allocate per-CPU sched_domain_shared in s_data
- Switch to assigning "sd->shared" from s_data
- Remove sched_domain_shared allocation with sd_data
Energy-aware scheduling updates:
- Filter false overloaded_group case for EAS (Vincent Guittot)
- PM: EM: Switch to rcu_dereference_all() in wakeup path
(Dietmar Eggemann)
Infrastructure updates:
- Replace use of system_unbound_wq with system_dfl_wq (Marco Crivellari)
Proxy scheduling updates by John Stultz:
- Make class_schedulers avoid pushing current, and get rid of proxy_tag_curr()
- Minimise repeated sched_proxy_exec() checking
- Fix potentially missing balancing with Proxy Exec
- Fix and improve task::blocked_on et al handling
- Add assert_balance_callbacks_empty() helper
- Add logic to zap balancing callbacks if we pick again
- Move attach_one_task() and attach_task() helpers to sched.h
- Handle blocked-waiter migration (and return migration)
- Add K Prateek Nayak to scheduler reviewers for proxy execution
Misc cleanups and fixes by John Stultz, Joseph Salisbury, Peter
Zijlstra, K Prateek Nayak, Michal Koutný, Randy Dunlap, Shrikanth
Hegde, Vincent Guittot, Zhan Xusheng, Xie Yuanbin and Vincent Guittot"
* tag 'sched-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
sched/eevdf: Clear buddies for preempt_short
sched/rt: Cleanup global RT bandwidth functions
sched/rt: Move group schedulability check to sched_rt_global_validate()
sched/rt: Skip group schedulable check with rt_group_sched=0
sched/fair: Avoid overflow in enqueue_entity()
sched: Use u64 for bandwidth ratio calculations
sched/fair: Prevent negative lag increase during delayed dequeue
sched/fair: Use sched_energy_enabled()
sched: Handle blocked-waiter migration (and return migration)
sched: Move attach_one_task and attach_task helpers to sched.h
sched: Add logic to zap balance callbacks if we pick again
sched: Add assert_balance_callbacks_empty helper
sched/locking: Add special p->blocked_on==PROXY_WAKING value for proxy return-migration
sched: Fix modifying donor->blocked on without proper locking
locking: Add task::blocked_lock to serialize blocked_on state
sched: Fix potentially missing balancing with Proxy Exec
sched: Minimise repeated sched_proxy_exec() checking
sched: Make class_schedulers avoid pushing current, and get rid of proxy_tag_curr()
MAINTAINERS: Add K Prateek Nayak to scheduler reviewers
sched/core: Get this cpu once in ttwu_queue_cond()
...
|
||
|
Jakub Kicinski
|
35c2c39832 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Merge in late fixes in preparation for the net-next PR. Conflicts: include/net/sch_generic.h |
||
|
Naman Jain
|
404cd6bffe |
mshv_vtl: Fix vmemmap_shift exceeding MAX_FOLIO_ORDER
When registering VTL0 memory via MSHV_ADD_VTL0_MEMORY, the kernel computes pgmap->vmemmap_shift as the number of trailing zeros in the OR of start_pfn and last_pfn, intending to use the largest compound page order both endpoints are aligned to. However, this value is not clamped to MAX_FOLIO_ORDER, so a sufficiently aligned range (e.g. physical range [0x800000000000, 0x800080000000), corresponding to start_pfn=0x800000000 with 35 trailing zeros) can produce a shift larger than what memremap_pages() accepts, triggering a WARN and returning -EINVAL: WARNING: ... memremap_pages+0x512/0x650 requested folio size unsupported The MAX_FOLIO_ORDER check was added by commit |
||
|
Linus Torvalds
|
c92b4d3dd5 |
for-7.1-tag
-----BEGIN PGP SIGNATURE-----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=mVDJ
-----END PGP SIGNATURE-----
Merge tag 'for-7.1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"User visible changes:
- move shutdown ioctl support out of experimental features, a forced
stop of filesystem operation until the next unmount; additionally
there's a super block operation to forcibly remove a device from
under the filesystem that could lead to a shutdown or not if the
redundancy allows that
- report filesystem shutdown using fserror mechanism
- tree-checker updates:
- verify free space info, extent and bitmap items
- verify remap-tree items and related data in block group items
Performance improvements:
- speed up clearing first extent in the tracked range (+10%
throughput on sample workload)
- reduce COW rewrites of extent buffers during the same transaction
- avoid taking big device lock to update device stats during
transaction commit
- fix unnecessary flush on close when truncating empty files
(observed in practice on a backup application)
- prevent direct reclaim during compressed readahead to avoid stalls
under memory pressure
Notable fixes:
- fix chunk allocation strategy on RAID1-like block groups with
disproportionate device sizes, this could lead to ENOSPC due to
skewed reservation estimates
- adjust metadata reservation overcommit ratio to be less aggressive
and also try to flush if possible, this avoids ENOSPC and potential
transaction aborts in some edge cases (that are otherwise hard to
reproduce)
- fix silent IO error in encoded writes and ordered extent split in
zoned mode, the error was not correctly propagated to the address
space and could lead to zeroed ranges
- don't mark inline files NOCOMPRESS unexpectedly, the intent was to
do that for single block writes of regular files
- fix deadlock between reflink and transaction commit when using
flushoncommit
- fix overly strict item check of a running dev-replace operation
Core:
- zoned mode space reservation fixes:
- cap delayed refs metadata reservation to avoid overcommit
- update logic to reclaim partially unusable zones
- add another state to flush and reclaim partially used zone
- limit number of zones reclaimed in one go to avoid blocking
other operations
- don't let log trees consume global reserve on overcommit and fall
back to transaction commit
- revalidate extent buffer when checking its up-to-date status
- add self tests for zoned mode block group specifics
- reduce atomic allocations in some qgroup paths
- avoid unnecessary root node COW during snapshotting
- start new transaction in block group relocation conditionally
- faster check of NOCOW files on currently snapshotted root
- change how compressed bio size is tracked from bio and reduce the
structure size
- new tracepoint for search slot restart tracking
- checksum list manipulation improvements
- type, parameter cleanups, refactoring
- error handling improvements, transaction abort call adjustments"
* tag 'for-7.1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (116 commits)
btrfs: btrfs_log_dev_io_error() on all bio errors
btrfs: fix silent IO error loss in encoded writes and zoned split
btrfs: skip clearing EXTENT_DEFRAG for NOCOW ordered extents
btrfs: use BTRFS_FS_UPDATE_UUID_TREE_GEN flag for UUID tree rescan check
btrfs: remove duplicate journal_info reset on failure to commit transaction
btrfs: tag as unlikely if statements that check for fs in error state
btrfs: fix double free in create_space_info() error path
btrfs: fix double free in create_space_info_sub_group() error path
btrfs: do not reject a valid running dev-replace
btrfs: only invalidate btree inode pages after all ebs are released
btrfs: prevent direct reclaim during compressed readahead
btrfs: replace BUG_ON() with error return in cache_save_setup()
btrfs: zstd: don't cache sectorsize in a local variable
btrfs: zlib: don't cache sectorsize in a local variable
btrfs: zlib: drop redundant folio address variable
btrfs: lzo: inline read/write length helpers
btrfs: use common eb range validation in read_extent_buffer_to_user_nofault()
btrfs: read eb folio index right before loops
btrfs: rename local variable for offset in folio
btrfs: unify types for binary search variables
...
|
||
|
Linus Torvalds
|
23acda7c22 |
for-7.1/io_uring-20260411
-----BEGIN PGP SIGNATURE-----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=IoaB
-----END PGP SIGNATURE-----
Merge tag 'for-7.1/io_uring-20260411' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring updates from Jens Axboe:
- Add a callback driven main loop for io_uring, and BPF struct_ops
on top to allow implementing custom event loop logic
- Decouple IOPOLL from being a ring-wide all-or-nothing setting,
allowing IOPOLL use cases to also issue certain white listed
non-polled opcodes
- Timeout improvements. Migrate internal timeout storage from
timespec64 to ktime_t for simpler arithmetic and avoid copying of
timespec data
- Zero-copy receive (zcrx) updates:
- Add a device-less mode (ZCRX_REG_NODEV) for testing and
experimentation where data flows through the copy fallback path
- Fix two-step unregistration regression, DMA length calculations,
xarray mark usage, and a potential 32-bit overflow in id
shifting
- Refactoring toward multi-area support: dedicated refill queue
struct, consolidated DMA syncing, netmem array refilling format,
and guard-based locking
- Zero-copy transmit (zctx) cleanup:
- Unify io_send_zc() and io_sendmsg_zc() into a single function
- Add vectorized registered buffer send for IORING_OP_SEND_ZC
- Add separate notification user_data via sqe->addr3 so
notification and completion CQEs can be distinguished without
extra reference counting
- Switch struct io_ring_ctx internal bitfields to explicit flag bits
with atomic-safe accessors, and annotate the known harmless races on
those flags
- Various optimizations caching ctx and other request fields in local
variables to avoid repeated loads, and cleanups for tctx setup, ring
fd registration, and read path early returns
* tag 'for-7.1/io_uring-20260411' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (58 commits)
io_uring: unify getting ctx from passed in file descriptor
io_uring/register: don't get a reference to the registered ring fd
io_uring/tctx: clean up __io_uring_add_tctx_node() error handling
io_uring/tctx: have io_uring_alloc_task_context() return tctx
io_uring/timeout: use 'ctx' consistently
io_uring/rw: clean up __io_read() obsolete comment and early returns
io_uring/zcrx: use correct mmap off constants
io_uring/zcrx: use dma_len for chunk size calculation
io_uring/zcrx: don't clear not allocated niovs
io_uring/zcrx: don't use mark0 for allocating xarray
io_uring: cast id to u64 before shifting in io_allocate_rbuf_ring()
io_uring/zcrx: reject REG_NODEV with large rx_buf_size
io_uring/cancel: validate opcode for IORING_ASYNC_CANCEL_OP
io_uring/rsrc: use io_cache_free() to free node
io_uring/zcrx: rename zcrx [un]register functions
io_uring/zcrx: check ctrl op payload struct sizes
io_uring/zcrx: cache fallback availability in zcrx ctx
io_uring/zcrx: warn on a repeated area append
io_uring/zcrx: consolidate dma syncing
io_uring/zcrx: netmem array as refiling format
...
|
||
|
Linus Torvalds
|
7fe6ac157b |
for-7.1/block-20260411
-----BEGIN PGP SIGNATURE-----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=ga3t
-----END PGP SIGNATURE-----
Merge tag 'for-7.1/block-20260411' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- Add shared memory zero-copy I/O support for ublk, bypassing per-I/O
copies between kernel and userspace by matching registered buffer
PFNs at I/O time. Includes selftests.
- Refactor bio integrity to support filesystem initiated integrity
operations and arbitrary buffer alignment.
- Clean up bio allocation, splitting bio_alloc_bioset() into clear fast
and slow paths. Add bio_await() and bio_submit_or_kill() helpers,
unify synchronous bi_end_io callbacks.
- Fix zone write plug refcount handling and plug removal races. Add
support for serializing zone writes at QD=1 for rotational zoned
devices, yielding significant throughput improvements.
- Add SED-OPAL ioctls for Single User Mode management and a STACK_RESET
command.
- Add io_uring passthrough (uring_cmd) support to the BSG layer.
- Replace pp_buf in partition scanning with struct seq_buf.
- zloop improvements and cleanups.
- drbd genl cleanup, switching to pre_doit/post_doit.
- NVMe pull request via Keith:
- Fabrics authentication updates
- Enhanced block queue limits support
- Workqueue usage updates
- A new write zeroes device quirk
- Tagset cleanup fix for loop device
- MD pull requests via Yu Kuai:
- Fix raid5 soft lockup in retry_aligned_read()
- Fix raid10 deadlock with check operation and nowait requests
- Fix raid1 overlapping writes on writemostly disks
- Fix sysfs deadlock on array_state=clear
- Proactive RAID-5 parity building with llbitmap, with
write_zeroes_unmap optimization for initial sync
- Fix llbitmap barrier ordering, rdev skipping, and bitmap_ops
version mismatch fallback
- Fix bcache use-after-free and uninitialized closure
- Validate raid5 journal metadata payload size
- Various cleanups
- Various other fixes, improvements, and cleanups
* tag 'for-7.1/block-20260411' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (146 commits)
ublk: fix tautological comparison warning in ublk_ctrl_reg_buf
scsi: bsg: fix buffer overflow in scsi_bsg_uring_cmd()
block: refactor blkdev_zone_mgmt_ioctl
MAINTAINERS: update ublk driver maintainer email
Documentation: ublk: address review comments for SHMEM_ZC docs
ublk: allow buffer registration before device is started
ublk: replace xarray with IDA for shmem buffer index allocation
ublk: simplify PFN range loop in __ublk_ctrl_reg_buf
ublk: verify all pages in multi-page bvec fall within registered range
ublk: widen ublk_shmem_buf_reg.len to __u64 for 4GB buffer support
xfs: use bio_await in xfs_zone_gc_reset_sync
block: add a bio_submit_or_kill helper
block: factor out a bio_await helper
block: unify the synchronous bi_end_io callbacks
xfs: fix number of GC bvecs
selftests/ublk: add read-only buffer registration test
selftests/ublk: add filesystem fio verify test for shmem_zc
selftests/ublk: add hugetlbfs shmem_zc test for loop target
selftests/ublk: add shared memory zero-copy test
selftests/ublk: add UBLK_F_SHMEM_ZC support for loop target
...
|
||
|
Linus Torvalds
|
b8f82cb0d8 |
Landlock update for v7.1-rc1
-----BEGIN PGP SIGNATURE----- iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCadfgCxAcbWljQGRpZ2lr b2QubmV0AAoJEOXj0OiMgvbSl5cA/0QZjJ+4V2DVzJQM5qzmNK9He9uYaOs7F2Ks xRvg7IebAPwMEcVY+CVQxD+YGj08UgM753yx4CRbhsu4k5mowEEJDQ== =Lz9R -----END PGP SIGNATURE----- Merge tag 'landlock-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux Pull Landlock update from Mickaël Salaün: "This adds a new Landlock access right for pathname UNIX domain sockets thanks to a new LSM hook, and a few fixes" * tag 'landlock-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: (23 commits) landlock: Document fallocate(2) as another truncation corner case landlock: Document FS access right for pathname UNIX sockets selftests/landlock: Simplify ruleset creation and enforcement in fs_test selftests/landlock: Check that coredump sockets stay unrestricted selftests/landlock: Audit test for LANDLOCK_ACCESS_FS_RESOLVE_UNIX selftests/landlock: Test LANDLOCK_ACCESS_FS_RESOLVE_UNIX selftests/landlock: Replace access_fs_16 with ACCESS_ALL in fs_test samples/landlock: Add support for named UNIX domain socket restrictions landlock: Clarify BUILD_BUG_ON check in scoping logic landlock: Control pathname UNIX domain socket resolution by path landlock: Use mem_is_zero() in is_layer_masks_allowed() lsm: Add LSM hook security_unix_find landlock: Fix kernel-doc warning for pointer-to-array parameters landlock: Fix formatting in tsync.c landlock: Improve kernel-doc "Return:" section consistency landlock: Add missing kernel-doc "Return:" sections selftests/landlock: Fix format warning for __u64 in net_test selftests/landlock: Skip stale records in audit_match_record() selftests/landlock: Drain stale audit records on init selftests/landlock: Fix socket file descriptor leaks in audit helpers ... |
||
|
Linus Torvalds
|
de639344bb |
audit/stable-7.1 PR 20260410
-----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmnZegUUHHBhdWxAcGF1 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXNydxAApWBVRWp/AY7jtCQGWRYAa+6y+bQ0 RWfu8putXaOyk3NTeWP64e87FKsdByR/yflefYxMH+bXc2mwbuUZYAreEVmLCJ1P QxHKuwCkCNOz90n/Y7nlDSDK1GYdzlFkCgidfr4iNSCD58WMTtNNpZREzaNiR8a1 PZ3bFvJH+S7BRCGA6/S/20rNYeWTga56pSrWt6VpMwVHGJ1R4DsD60pT8z0NqMYI BTBLeZ36HlZdwUp+APldKNNDRKG1ZQVKJRO68qcSkopr4vQzK7yL/SJsCdU8MHj2 LccXTCTHHWJbpdiE7BtzPO9UobVZIdcz2wsnJHWxzHYtXlPolgM7F31111GL4HSv V/mq5o7dR3h6nn+1gkWHjOpd/f3J3xl3FaJsH9FIIhPmCRHb4oZI0WG0ZH3mHZBl o6aaWja3PBl0XNA+q87DQVBYDOyVNB4RjuaKy+d7hm4eronTRaZkg3zutrB6/XxP uFbp+Q3diWNMsYO52DKFThL/sStmnnCMIRJuTxd8QaPhLVakaFSkWZycSUH4HijD 8WMk3e4yo3TeD6rCAognwKclj0vCMHS3TLOMXlY0vMD04gwXJ2S81yfyXGT4F5De KkXj61TFMxPyiZ6yrxk86BmoqHL0DUiCDn1rMKbNdIncHedKZoNuy+O/XNLS6No/ hLRvXSI7MNthJ5E= =1rY2 -----END PGP SIGNATURE----- Merge tag 'audit-pr-20260410' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit updates from Paul Moore: - Improved handling of unknown status requests from userspace The current kernel code ignores unknown/unused request bits sent from userspace and returns an error code based on the results of the request(s) it does understand. The patch from Ricardo fixes this so that unknown requests return an -EINVAL to userspace, making compatibility a bit easier moving forward. - A number of small style and formatting cleanups * tag 'audit-pr-20260410' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: handle unknown status requests in audit_receive_msg() audit: fix coding style issues audit: remove redundant initialization of static variables to 0 audit: fix whitespace alignment in include/uapi/linux/audit.h |
||
|
Maxime Chevallier
|
e7a62edd34 |
net: phy: qcom: at803x: Use the correct bit to disable extended next page
As noted in the blamed commit, the AR8035 and other PHYs from this
family advertise the Extended Next Page support by default, which may be
understood by some partners as this PHY being multi-gig capable.
The fix is to disable XNP advertising, which is done by setting bit 12
of the Auto-Negotiation Advertisement Register (MII_ADVERTISE).
The blamed commit incorrectly uses MDIO_AN_CTRL1_XNP, which is bit 13 as per
802.3 : 45.2.7.1 AN control register (Register 7.0)
BIT 12 in MII_ADVERTISE is wrapped by ADVERTISE_RESV, used by some
drivers such as the aquantia one. 802.3 Clause 28 defines bit 12 as
Extended Next Page ability, at least in recent versions of the standard.
Let's add a define for it and use it in the at803x driver.
Fixes:
|
||
|
Linus Torvalds
|
07c3ef5822 |
vfs-7.1-rc1.pidfs
Please consider pulling these changes from the signed vfs-7.1-rc1.pidfs tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCadjZCwAKCRCRxhvAZXjc
omfuAQDckt5g7vxBr9hKdyrq1//nsu44fst/mRqr2iSYjuKfPQD/VN6Lw9e56Y/q
l4hHxsPPrSSxbijwng7im36iPIGdfwI=
=BbFh
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.1-rc1.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull clone and pidfs updates from Christian Brauner:
"Add three new clone3() flags for pidfd-based process lifecycle
management.
CLONE_AUTOREAP:
CLONE_AUTOREAP makes a child process auto-reap on exit without ever
becoming a zombie. This is a per-process property in contrast to
the existing auto-reap mechanism via SA_NOCLDWAIT or SIG_IGN for
SIGCHLD which applies to all children of a given parent.
Currently the only way to automatically reap children is to set
SA_NOCLDWAIT or SIG_IGN on SIGCHLD. This is a parent-scoped
property affecting all children which makes it unsuitable for
libraries or applications that need selective auto-reaping of
specific children while still being able to wait() on others.
CLONE_AUTOREAP stores an autoreap flag in the child's
signal_struct. When the child exits do_notify_parent() checks this
flag and causes exit_notify() to transition the task directly to
EXIT_DEAD. Since the flag lives on the child it survives
reparenting: if the original parent exits and the child is
reparented to a subreaper or init the child still auto-reaps when
it eventually exits. This is cleaner than forcing the subreaper to
get SIGCHLD and then reaping it. If the parent doesn't care the
subreaper won't care. If there's a subreaper that would care it
would be easy enough to add a prctl() that either just turns back
on SIGCHLD and turns off auto-reaping or a prctl() that just
notifies the subreaper whenever a child is reparented to it.
CLONE_AUTOREAP can be combined with CLONE_PIDFD to allow the parent
to monitor the child's exit via poll() and retrieve exit status via
PIDFD_GET_INFO. Without CLONE_PIDFD it provides a fire-and-forget
pattern. No exit signal is delivered so exit_signal must be zero.
CLONE_THREAD and CLONE_PARENT are rejected: CLONE_THREAD because
autoreap is a process-level property, and CLONE_PARENT because an
autoreap child reparented via CLONE_PARENT could become an
invisible zombie under a parent that never calls wait().
The flag is not inherited by the autoreap process's own children.
Each child that should be autoreaped must be explicitly created
with CLONE_AUTOREAP.
CLONE_NNP:
CLONE_NNP sets no_new_privs on the child at clone time. Unlike
prctl(PR_SET_NO_NEW_PRIVS) which a process sets on itself,
CLONE_NNP allows the parent to impose no_new_privs on the child at
creation without affecting the parent's own privileges.
CLONE_THREAD is rejected because threads share credentials.
CLONE_NNP is useful on its own for any spawn-and-sandbox pattern
but was specifically introduced to enable unprivileged usage of
CLONE_PIDFD_AUTOKILL.
CLONE_PIDFD_AUTOKILL:
This flag ties a child's lifetime to the pidfd returned from
clone3(). When the last reference to the struct file created by
clone3() is closed the kernel sends SIGKILL to the child. A pidfd
obtained via pidfd_open() for the same process does not keep the
child alive and does not trigger autokill - only the specific
struct file from clone3() has this property. This is useful for
container runtimes, service managers, and sandboxed subprocess
execution - any scenario where the child must die if the parent
crashes or abandons the pidfd or just wants a throwaway helper
process.
CLONE_PIDFD_AUTOKILL requires both CLONE_PIDFD and CLONE_AUTOREAP.
It requires CLONE_PIDFD because the whole point is tying the
child's lifetime to the pidfd. It requires CLONE_AUTOREAP because a
killed child with no one to reap it would become a zombie - the
primary use case is the parent crashing or abandoning the pidfd so
no one is around to call waitpid(). CLONE_THREAD is rejected
because autokill targets a process not a thread.
If CLONE_NNP is specified together with CLONE_PIDFD_AUTOKILL an
unprivileged user may spawn a process that is autokilled. The child
cannot escalate privileges via setuid/setgid exec after being
spawned. If CLONE_PIDFD_AUTOKILL is specified without CLONE_NNP the
caller must have have CAP_SYS_ADMIN in its user namespace"
* tag 'vfs-7.1-rc1.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests: check pidfd_info->coredump_code correctness
pidfds: add coredump_code field to pidfd_info
kselftest/coredump: reintroduce null pointer dereference
selftests/pidfd: add CLONE_PIDFD_AUTOKILL tests
selftests/pidfd: add CLONE_NNP tests
selftests/pidfd: add CLONE_AUTOREAP tests
pidfd: add CLONE_PIDFD_AUTOKILL
clone: add CLONE_NNP
clone: add CLONE_AUTOREAP
|
||
|
Paolo Bonzini
|
6b80203187 |
- ESA nesting support
- 4k memslots - LPSW/E fix -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEwGNS88vfc9+v45Yq41TmuOI4ufgFAmncpfkACgkQ41TmuOI4 ufj4ehAA0fTpaA4VdUbF/uH1o4BLu/hElPXhJYnyDa6hUK0XiFS6bpouz50wTMz/ QjbmM+uCLKxVBK2FPE0cPj3iobvlfTTgP0tNkgwHDFlLfuZ9914cxYc4HYPrRJ/y Ey+6TT4ynkf2mihiLFHKKuBPi4DjfC3rAjy8ZHOnNh5ro+00uXVCGhssBUKvXNST X45q6JaN6p3eDVjC/ov/K593BJgMoW5x/kDmoyICuhDYs+8TiY+n+61BdVARKdtu 3+vwkjQ/mrl+IwJMvfeH+nO2qnjREc6EZd9YTJOCheThhELw0tX4jeha4PldeeZY fg+8uObSmbzxcmsvWRGTuVpobEBpOqRP9sdADxF77dq1ExFXwthXFT8AQw8NzI2k leU8DQqXVUOkykmpvacV96AGlYrRWb47806TdVM+fJmLkvmt0llS/MK6fQNz+Jlb okFx1kLnqSKz7x0O6Avgz/+F6yjFAwTp7mwKmd8bHzKCkLCYq8Gl6WPxx/peFY0P dwEwq0k89Wld7gjkAXwtwjttIrQcwghacqBCJAu4cA/3NnM2DCAPf3gSiY1PoYPX 06ZUYBzLH8wQJRZLToWpYvH9xOOfMmTETx7LDsYuMztxyesS+ReR/dVkCCei/2oD KeoGD0vBA0d8/wW+ZmB6YYxUiWT0WOllb/9s26NG/7lCTY1UgLI= =YTUc -----END PGP SIGNATURE----- Merge tag 'kvm-s390-next-7.1-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD - ESA nesting support - 4k memslots - LPSW/E fix |
||
|
Paolo Bonzini
|
e74c3a8891 |
KVM/arm64 updates for 7.1
* New features: - Add support for tracing in the standalone EL2 hypervisor code, which should help both debugging and performance analysis. This comes with a full infrastructure for 'remote' trace buffers that can be exposed by non-kernel entities such as firmware. - Add support for GICv5 Per Processor Interrupts (PPIs), as the starting point for supporting the new GIC architecture in KVM. - Finally add support for pKVM protected guests, with anonymous memory being used as a backing store. About time! * Improvements and bug fixes: - Rework the dreaded user_mem_abort() function to make it more maintainable, reducing the amount of state being exposed to the various helpers and rendering a substantial amount of state immutable. - Expand the Stage-2 page table dumper to support NV shadow page tables on a per-VM basis. - Tidy up the pKVM PSCI proxy code to be slightly less hard to follow. - Fix both SPE and TRBE in non-VHE configurations so that they do not generate spurious, out of context table walks that ultimately lead to very bad HW lockups. - A small set of patches fixing the Stage-2 MMU freeing in error cases. - Tighten-up accepted SMC immediate value to be only #0 for host SMCCC calls. - The usual cleanups and other selftest churn. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmnWdswACgkQI9DQutE9 ekNYvBAAxj5Zmsx8sJ2CYDTJc2w4XkEjSgDugA+J/s0TMgrzExeBlWCstdhVTncy 68nwOjQl3TotnIrt7q36kko9u7IdD0pHNrk34NtlggLjHfB61n9SNcAA6j4F6zJa GFkHpJSrSnZuUPqapkDnlyhuPkgTIAkEUk2Am9siksSfY4HvRyHZJm2FTdxsdIBn NN9wvQqw2wefTXOQ8gS+oHbPVp1cPbwrF2a3EhzXXv/6W3mUBstXgsijgo07UzCp W6vHCv2wqHbHdf67z3Q3hL+VXlVH6oHlyW99/swqISvqRkH/iSB90+oUojnMRrSm yB6Wmhh8jboCaajWMJhG+veZw+7GMXU4nOrGd1rbnY8cwRl/TQ5YibhRm7DIdvjO xeUluTLJ0NdweQUwE2k4OlgKOuGang3E2p0clmkUO4SstA48MdqR/kpST6guIlWw U5syuNaaaiuwP5QOi9qZmMCNmQ3ZfnZG3nseJFdoyGjhVhf5jyQyv4Du9vGZQFF/ Zkg7yTqC4OWiC+3GkW9YYAySM1MyetivLtd47PGzHPTdtaZziWhNvQ0y+8QjQ+R+ CJNvyS/DvsT7epSya4sLgMP1ZAlih9xkz5sQ6k8NJLBYYXi0v33qwqditErgLLyj S4Ci4WNhHHWIusvCVM7JUBkH0AElpmi506f7F6iHoFLlkYR4t9U= =/SuQ -----END PGP SIGNATURE----- Merge tag 'kvmarm-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for 7.1 * New features: - Add support for tracing in the standalone EL2 hypervisor code, which should help both debugging and performance analysis. This comes with a full infrastructure for 'remote' trace buffers that can be exposed by non-kernel entities such as firmware. - Add support for GICv5 Per Processor Interrupts (PPIs), as the starting point for supporting the new GIC architecture in KVM. - Finally add support for pKVM protected guests, with anonymous memory being used as a backing store. About time! * Improvements and bug fixes: - Rework the dreaded user_mem_abort() function to make it more maintainable, reducing the amount of state being exposed to the various helpers and rendering a substantial amount of state immutable. - Expand the Stage-2 page table dumper to support NV shadow page tables on a per-VM basis. - Tidy up the pKVM PSCI proxy code to be slightly less hard to follow. - Fix both SPE and TRBE in non-VHE configurations so that they do not generate spurious, out of context table walks that ultimately lead to very bad HW lockups. - A small set of patches fixing the Stage-2 MMU freeing in error cases. - Tighten-up accepted SMC immediate value to be only #0 for host SMCCC calls. - The usual cleanups and other selftest churn. |
||
|
Paolo Bonzini
|
05578316ca |
LoongArch KVM changes for v7.1
1. Use CSR_CRMD_PLV in kvm_arch_vcpu_in_kernel(). 2. Let vcpu_is_preempted() a macro & some enhanments. 3. Add DMSINTC irqchip in kernel support. 4. Add KVM PMU test cases for tools/selftests. -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmnXiPMWHGNoZW5odWFj YWlAa2VybmVsLm9yZwAKCRAChivD8uImehVBD/4v8Y6S4Sxkc/EBUDKbPwLGGhGR aZEe2dzHr10C/mx7Q2cYwjKhR9bpgPcBe0xiEomxAopLwK15qMai2mnNRX6SJA8P 00J/3xWpKR6XsgsMv2KF9XvqdT1SlnzOC04D2v/wbkjlebWaCRIZgWG7yoRTHRIj TOpzf7XFBOnNpuzg94DjXsgAlSOo0qbHAMGMgbQ3k7OKzomAIlD4ljCyPD+JdvCz T7jW7n4Nho1SoOYPeWwXyxbIeorgtRB3JQ8RakMCjkJYyChICe1BGXJ66qeTLizd G5GOhiePtU5LLXQlRUU/uOLmxsJ5jZjJWs3tfsQOFz9f2i8JmF5nSw3DqmpTaQSF IF3v+3Iu9o+1dUBPsZVUjPWORWuRSFrXnnrUF3JPBZazXPwJHq8Gvbt3z6QFE8RO Z+Z9zDDcVrSWfJkYV3uHocPPnkCNTcIUdT2QFAWZYkBQCVlbbKET43dY0MbeFR9R n+mQcQVJOfp/a5oXwQyiiov6c67JX9yTT8wCB3tyPJVsLsiCOR8hN9UHSiQBc+Sx TLCuSkt0uVgwkTEM+pnJqLofRZGc9A6z8RPubwCgyxJp3+YPX5d3FtgHYcdNmAfK fQ2ILp7K0L52FcjVSr3uV8QacqUMhxLknODdjBhBcU0sh2V7yJPd9zoJq41xjtLy e8PC1D6NHGneLiuCCA== =zbdN -----END PGP SIGNATURE----- Merge tag 'loongarch-kvm-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD LoongArch KVM changes for v7.1 1. Use CSR_CRMD_PLV in kvm_arch_vcpu_in_kernel(). 2. Let vcpu_is_preempted() a macro & some enhanments. 3. Add DMSINTC irqchip in kernel support. 4. Add KVM PMU test cases for tools/selftests. |
||
|
Linus Torvalds
|
086aca1030 |
s390:
* KVM: s390: vsie: Fix races with partial gmap invalidations x86: * KVM: x86: Use __DECLARE_FLEX_ARRAY() for UAPI structures with VLAs -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmnaOrgUHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroPTOwf8DW6BXYgHdDOWiiQQETD+D/JWbceG 9fKMdNjt48It3hKWc9oJ2eZU2avRHf7d8hAIUIhOeiUbeVf4QrLUfQXzP9j/9P+T vRpMlDf5Ampv3m8LxTBGESgwrlRHtWDGUFsE+CcVAIWEQfCsXnbwkeo3L9aCLTgA ekrnHqsx+Oh/n2+siEp0Nz0n8gT0hCtbqAqJlVcuHpJvzRzeDvcnukvHxjIydR65 uIFY5dahzheGqbPhplGKKAdPCHD+/S6QB+ShqKrT92zeZvhPZrt1XHV4Bt/sKSkP 9uAeuJ+JtbZvMG7n8fCg5ebwqJrw15uddZcV8l3qIuxHzyZ/XzKYhQm4oA== =7zjP -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm fixes from Paolo Bonzini: "s390: - vsie: Fix races with partial gmap invalidations x86: - Use __DECLARE_FLEX_ARRAY() for UAPI structures with VLAs" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: vsie: Fix races with partial gmap invalidations KVM: x86: Use __DECLARE_FLEX_ARRAY() for UAPI structures with VLAs |
||
|
Paolo Bonzini
|
0e9b0e0124 |
KVM x86 fixes for 7.1
Declare flexible arrays in uAPI structures using __DECLARE_FLEX_ARRAY() so that KVM's uAPI headers can be included in C++ projects. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEKTobbabEP7vbhhN9OlYIJqCjN/0FAmnZHqsACgkQOlYIJqCj N/331BAApsvBOvcKxeHM598wAsZTtBIUiMWrm/hybB2zhXxbcC9BDPN5NrYP9eJX khlLm9YRDI2Hvk8QNuwPXV/mHU5U0HNJ48BUToL6H5x6792dnRCbL046rYCyRZbi bUjMcUjTWtv7g+UEoYOsMpmYQlTlf4krCbw2ixn6/4c2Ab76TRmrISU+tknoal+b KGXEJWhsEiueUD8xpjR84P0h3d6x+EHc2oyDk/k+aFZAcbjWFz/8aLjOSVc00V36 DqYKbMGO/22CNkWSLk9Dr6mitn6HmG151HNAvUvHlPMFQLrP9jpk13u1IHZsR7H4 4yykj4tm5+02775IFqfPLNZ4Ipk70WO50ndl3plh7G7187ckYsfl+oQu2c4oIveB sPfnEHqteGKw+GLOM9Xu4MVCAvy7FFGlgGIkZpULA7cLNyIayfmKuZTF7/UEh9Wy fL2UAypzJjCIgLFyoio4CHqLJ4vuUneyHyoJczS/Wd9kuL0kHrLEw771gLGjwslB Nk0900qPlxEWx47G6MadzSh+JexjT9KrSCgaACNWKJpzQMkcw6gwDSIGq9F/f0Ac Zl7XFbQ2KKm/Z8CWCTg5XdxI6zz0NCzlcYoepk7CfHgs0xZjWqu5AReLcQnffx2/ c5YKoOffkicokffWQju64kjE/VYpdAITHONa1r7hv73/bfYfUGg= =VJsI -----END PGP SIGNATURE----- Merge tag 'kvm-x86-fixes-7.1' of https://github.com/kvm-x86/linux into HEAD KVM x86 fixes for 7.1 Declare flexible arrays in uAPI structures using __DECLARE_FLEX_ARRAY() so that KVM's uAPI headers can be included in C++ projects. |
||
|
Linus Torvalds
|
e774d5f1bc |
RISC-V updates for v7.0-rc8
Before v7.0 is released, fix a few issues with the CFI patchset,
merged earlier in v7.0-rc, that primarily affect interfaces to
non-kernel code:
- Improve the prctl() interface for per-task indirect branch landing
pad control to expand abbreviations and to resemble the speculation
control prctl() interface
- Expand the "LP" and "SS" abbreviations in the ptrace uapi header
file to "branch landing pad" and "shadow stack", to improve
readability
- Fix a typo in a CFI-related macro name in the ptrace uapi header
file
- Ensure that the indirect branch tracking state and shadow stack
state are unlocked immediately after an exec() on the new task so
that libc subsequently can control it
- While working in this area, clean up the kernel-internal,
cross-architecture prctl() function names by expanding the
abbreviations mentioned above
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEElRDoIDdEz9/svf2Kx4+xDQu9KksFAmnYP5YACgkQx4+xDQu9
KkuoPQ//Yye5D+35EqfA12yP96Vrtg0QCKiqMotz3yLo0T7zh5KosAs/QIE5eQi7
vWRnCld5PsFa0ZS2822oPfQo8pKVO1y7M2ecFWSwaOWq865Xs82M/puqEQF3GFCS
219cg1dTVBGvvKSf4MINUBRprfZmZRT9pzhSk79qHEbHKzwCDk7uah51iUdyPJyd
KX3hshYMLq3rooTHR2wD/ChTpV+pCrt2rSUVbW8+sTUWDfv2sTLauHmemKw7LpdW
C0SulXvcYkGyiqsB5AXW9x2ttJ5hX9diPb73XS6eBCU0CaMl9BVZWNKeqhEMJxKR
wmqIadD8pelf7Jh7wGAbNW4hWqTsO3xRpZH38Y/cGLdhs3cqvKjEmT3fOFWUP9bP
hWv5027gVXVSOmvxhPiUJs7D5WWAz4Q64JZfdJSmDdEWVXcI0v/hzdukuPw4iiT6
DaqOyClTcwc+j1jawFTICXTF7wXfvZT5sjulrmPk1HX4nZ5padKpfQ77AdKHF9Q6
9pC25QHQk42h/R4ynA4lm15YnCOfYvjP25hU7K64gQnqO6qBrolfrA4kJOmdYv/g
1IXsA2YZafJbcXwyFZjWy50uu5gaCM5JhRRFdUrjmB6j3gv9HfBlWJXQywReUjPo
Kq4tnFppxzFVm23COj9j5kyjsFjUhZ8KCft3+n7lrndeOCk5Z3E=
=5/Ct
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-v7.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
"Before v7.0 is released, fix a few issues with the CFI patchset,
merged earlier in v7.0-rc, that primarily affect interfaces to
non-kernel code:
- Improve the prctl() interface for per-task indirect branch landing
pad control to expand abbreviations and to resemble the speculation
control prctl() interface
- Expand the "LP" and "SS" abbreviations in the ptrace uapi header
file to "branch landing pad" and "shadow stack", to improve
readability
- Fix a typo in a CFI-related macro name in the ptrace uapi header
file
- Ensure that the indirect branch tracking state and shadow stack
state are unlocked immediately after an exec() on the new task so
that libc subsequently can control it
- While working in this area, clean up the kernel-internal,
cross-architecture prctl() function names by expanding the
abbreviations mentioned above"
* tag 'riscv-for-linus-v7.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
prctl: cfi: change the branch landing pad prctl()s to be more descriptive
riscv: ptrace: cfi: expand "SS" references to "shadow stack" in uapi headers
prctl: rename branch landing pad implementation functions to be more explicit
riscv: ptrace: expand "LP" references to "branch landing pads" in uapi headers
riscv: cfi: clear CFI lock status in start_thread()
riscv: ptrace: cfi: fix "PRACE" typo in uapi header
|
||
|
Andy Roulin
|
54fc83a172 |
net: bridge: add stp_mode attribute for STP mode selection
The bridge-stp usermode helper is currently restricted to the initial
network namespace, preventing userspace STP daemons (e.g. mstpd) from
operating on bridges in other network namespaces. Since commit
|
||
|
Jakub Kicinski
|
1508922588 |
Merge branch 'netkit-support-for-io_uring-zero-copy-and-af_xdp'
Daniel Borkmann says: ==================== netkit: Support for io_uring zero-copy and AF_XDP Containers use virtual netdevs to route traffic from a physical netdev in the host namespace. They do not have access to the physical netdev in the host and thus can't use memory providers or AF_XDP that require reconfiguring/restarting queues in the physical netdev. This patchset adds the concept of queue leasing to virtual netdevs that allow containers to use memory providers and AF_XDP at native speed. Leased queues are bound to a real queue in a physical netdev and act as a proxy. Memory providers and AF_XDP operations take an ifindex and queue id, so containers would pass in an ifindex for a virtual netdev and a queue id of a leased queue, which then gets proxied to the underlying real queue. We have implemented support for this concept in netkit and tested the latter against Nvidia ConnectX-6 (mlx5) as well as Broadcom BCM957504 (bnxt_en) 100G NICs. For more details see the individual patches. ==================== Link: https://patch.msgid.link/20260402231031.447597-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Daniel Borkmann
|
4810389605 |
netkit: Add single device mode for netkit
Add a single device mode for netkit instead of netkit pairs. The primary target for the paired devices is to connect network namespaces, of course, and support has been implemented in projects like Cilium [0]. For the rxq leasing the plan is to support two main scenarios related to single device mode: * For the use-case of io_uring zero-copy, the control plane can either set up a netkit pair where the peer device can perform rxq leasing which is then tied to the lifetime of the peer device, or the control plane can use a regular netkit pair to connect the hostns to a Pod/container and dynamically add/remove rxq leasing through a single device without having to interrupt the device pair. In the case of io_uring, the memory pool is used as skb non-linear pages, and thus the skb will go its way through the regular stack into netkit. Things like the netkit policy when no BPF is attached or skb scrubbing etc apply as-is in case the paired devices are used, or if the backend memory is tied to the single device and traffic goes through a paired device. * For the use-case of AF_XDP, the control plane needs to use netkit in the single device mode. The single device mode currently enforces only a pass policy when no BPF is attached, and does not yet support BPF link attachments for AF_XDP. skbs sent to that device get dropped at the moment. Given AF_XDP operates at a lower layer of the stack tying this to the netkit pair did not make sense. In future, the plan is to allow BPF at the XDP layer which can: i) process traffic coming from the AF_XDP application (e.g. QEMU with AF_XDP backend) to filter egress traffic or to push selected egress traffic up to the single netkit device to the local stack (e.g. DHCP requests), and ii) vice-versa skbs sent to the single netkit into the AF_XDP application (e.g. DHCP replies). Also, the control-plane can dynamically manage rxq leasing for the single netkit device without having to interrupt (e.g. down/up cycle) the main netkit pair for the Pod which has traffic going in and out. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Co-developed-by: David Wei <dw@davidwei.uk> Signed-off-by: David Wei <dw@davidwei.uk> Reviewed-by: Jordan Rife <jordan@jrife.io> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://docs.cilium.io/en/stable/operations/performance/tuning/#netkit-device-mode [0] Link: https://patch.msgid.link/20260402231031.447597-11-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Daniel Borkmann
|
7789c6bb76 |
net: Add queue-create operation
Add a ynl netdev family operation called queue-create that creates a
new queue on a netdevice:
name: queue-create
attribute-set: queue
flags: [admin-perm]
do:
request:
attributes:
- ifindex
- type
- lease
reply: &queue-create-op
attributes:
- id
This is a generic operation such that it can be extended for various
use cases in future. Right now it is mandatory to specify ifindex,
the queue type which is enforced to rx and a lease. The newly created
queue id is returned to the caller.
A queue from a virtual device can have a lease which refers to another
queue from a physical device. This is useful for memory providers
and AF_XDP operations which take an ifindex and queue id to allow
applications to bind against virtual devices in containers. The lease
couples both queues together and allows to proxy the operations from
a virtual device in a container to the physical device.
In future, the nested lease attribute can be lifted and made optional
for other use-cases such as dynamic queue creation for physical
netdevs. The lack of lease and the specification of the physical
device as an ifindex will imply that we need a real queue to be
allocated. Similarly, the queue type enforcement to rx can then be
lifted as well to support tx.
An early implementation had only driver-specific integration [0], but
in order for other virtual devices to reuse, it makes sense to have
this as a generic API in core net.
For leasing queues, the virtual netdev must have real_num_rx_queues
less than num_rx_queues at the time of calling queue-create. The
queue-type must be rx as only rx queues are supported for leasing
for now. We also enforce that the queue-create ifindex must point
to a virtual device, and that the nested lease attribute's ifindex
must point to a physical device. The nested lease attribute set
contains a netns-id attribute which is optional and can specify a
netns-id relative to the caller's netns. It requires cap_net_admin
and if the netns-id attribute is not specified, the lease ifindex
will be retrieved from the current netns. Also, it is modeled as
an s32 type similarly as done elsewhere in the stack.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://bpfconf.ebpf.io/bpfconf2025/bpfconf2025_material/lsfmmbpf_2025_netkit_borkmann.pdf [0]
Link: https://patch.msgid.link/20260402231031.447597-2-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Ming Lei
|
23b3b6f0b5 |
ublk: widen ublk_shmem_buf_reg.len to __u64 for 4GB buffer support
The __u32 len field cannot represent a 4GB buffer (0x100000000 overflows to 0). Change it to __u64 so buffers up to 4GB can be registered. Add a reserved field for alignment and validate it is zero. The kernel enforces a default max of 4GB (UBLK_SHMEM_BUF_SIZE_MAX) which may be increased in future. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Link: https://patch.msgid.link/20260409133020.3780098-2-tom.leiming@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Jakub Kicinski
|
b6e39e4846 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-7.0-rc8). Conflicts: net/ipv6/seg6_iptunnel.c |
||
|
Will Deacon
|
f8d5e7066d | Merge branches 'fixes', 'arm/smmu/updates', 'arm/smmu/bindings', 'riscv', 'intel/vt-d', 'amd/amd-vi' and 'core' into next | ||
|
Song Gao
|
229132c309 |
LoongArch: KVM: Add DMSINTC device support
Add device model for DMSINTC interrupt controller, implement basic create/destroy/set_attr interfaces, and register device model to kvm device table. Reviewed-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Song Gao <gaosong@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |