Add support for a second fine-grained UDP access right.
LANDLOCK_ACCESS_NET_CONNECT_SEND_UDP controls the ability to set the
remote port of a socket (via connect()) and to specify an explicit
destination when sending a datagram, to override any remote peer set on
a UDP socket (e.g. in sendto() or sendmsg()). It will be useful for
applications that send datagrams, and for some servers too (those
creating per-client sockets, which want to receive traffic only from a
specific address).
Similarly as for bind(), this access control is performed when
configuring sockets, not in hot code paths.
Add detection of when autobind is about to be required, and deny the
operation if the process would not be allowed to call bind(0)
explicitly. Autobind can only be performed in udp_lib_get_port() from
code paths already controlled by LSM hooks: when connect()ing, sending a
first datagram, and in some splice() EOF edge case which, afaiu, can
only happen after a remote peer has been set. This invariant needs to be
preserved to keep bind policies actually enforced.
Signed-off-by: Matthieu Buffet <matthieu@buffet.re>
Link: https://patch.msgid.link/20260611162107.49278-3-matthieu@buffet.re
[mic: Add quick return for non-sandboxed tasks, fix sa_family
dereferencing, fix comment formatting]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Add support for a first fine-grained UDP access right.
LANDLOCK_ACCESS_NET_BIND_UDP controls the ability to set the local port
of a UDP socket (via bind()). It will be useful for servers (to start
receiving datagrams), and for some clients that need to use a specific
source port (e.g. mDNS requires to use port 5353)
For obvious performance concerns, access control is only enforced when
configuring sockets, not when using them for common send/recv
operations.
Bump ABI to allow userspace to detect and use this new right.
Signed-off-by: Matthieu Buffet <matthieu@buffet.re>
Link: https://patch.msgid.link/20260611162107.49278-2-matthieu@buffet.re
[mic: Fix comment formatting]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Add DPLL_TYPE_GENERIC to represent DPLL devices which do not fit the
existing PPS or EEC classes.
The UAPI type is intentionally generic. During netdev discussion,
maintainers pointed out that introducing identifiers tied to a specific
placement or single design does not scale across ASICs and vendors.
The role of a DPLL is already inferable from the spawning driver,
bus device, and pin topology, without encoding additional
purpose-specific taxonomy in the type name.
Using a generic type keeps the UAPI extensible and avoids premature
naming that may become incorrect as new hardware topologies are
exposed through the DPLL subsystem.
Expose the new type through UAPI and netlink specification as "generic".
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Link: https://patch.msgid.link/20260607183045.1213735-2-grzegorz.nitka@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bils
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2026-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2026-06-12
1) Replace the open-coded manual cleanup in xfrm_add_policy() error
path with xfrm_policy_destroy() for consistency with
xfrm_policy_construct().
From Deepanshu Kartikey.
2) Limit XFRMA_TFCPAD to a sensible maximum (max IP length, 64k) since
u32 is excessive for traffic flow confidentiality padding.
From David Ahern.
3) Add a new netlink message XFRM_MSG_MIGRATE_STATE that
allows migrating individual IPsec SAs independently of
their policies. The existing XFRM_MSG_MIGRATE is tightly coupled
to policy+SA migration, lacks SPI for unique SA identification,
and cannot express reqid changes or migrate Transport mode
selectors. The new interface identifies the SA via SPI and mark,
supports reqid changes, address family changes, encap removal,
and uses an atomic create+install flow under x->lock to prevent
SN/IV reuse during AEAD SA migration.
From Antony Antony.
* tag 'ipsec-next-2026-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: add documentation for XFRM_MSG_MIGRATE_STATE
xfrm: restrict netlink attributes for XFRM_MSG_MIGRATE_STATE
xfrm: add XFRM_MSG_MIGRATE_STATE for single SA migration
xfrm: make xfrm_dev_state_add xuo parameter const
xfrm: extract address family and selector validation helpers
xfrm: refactor XFRMA_MTIMER_THRESH validation into a helper
xfrm: move encap and xuo into struct xfrm_migrate
xfrm: add error messages to state migration
xfrm: add state synchronization after migration
xfrm: check family before comparing addresses in migrate
xfrm: split xfrm_state_migrate into create and install functions
xfrm: rename reqid in xfrm_migrate
xfrm: fix NAT-related field inheritance in SA migration
xfrm: allow migration from UDP encapsulated to non-encapsulated ESP
xfrm: add extack to xfrm_init_state
xfrm: remove redundant assignments
xfrm: Reject excessive values for XFRMA_TFCPAD
xfrm: cleanup error path in xfrm_add_policy()
====================
Link: https://patch.msgid.link/20260612074725.1760473-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The main purpose of this cmd is to be able to associate a
non-psp-capable device (e.g. veth or netkit) with a psp device.
One use case is if we create a pair of veth/netkit, and assign 1 end
inside a netns, while leaving the other end within the default netns,
with a real PSP device, e.g. netdevsim or a physical PSP-capable NIC.
With this command, we could associate the veth/netkit inside the netns
with PSP device, so the virtual device could act as PSP-capable device
to initiate PSP connections, and performs PSP encryption/decryption on
the real PSP device.
Signed-off-by: Wei Wang <weibunny@fb.com>
Reviewed-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20260608233118.2694144-3-weibunny.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tls_toe feature and its single user (chelsio chtls) have been
unmaintained for multiple years. It also hooks into the core of the
TCP implementation, and bypasses most of the networking stack.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/1f30e73275c07bf879f547589872d0916025a52e.1781165969.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IOMMU_IOAS_MAP_FILE is documented as mapping a memfd, but the
implementation first tries to resolve the fd as a dma-buf and has a
special path for supported dma-buf exporters. In particular, VFIO PCI
dma-bufs exported through VFIO_DEVICE_FEATURE_DMA_BUF can be mapped when
they describe a single DMA range.
Update the UAPI comment so userspace understands that certain kinds of
dma-buf are supported in addition to memfd.
Fixes: 44ebaa1744 ("iommufd: Accept a DMABUF through IOMMU_IOAS_MAP_FILE")
Link: https://patch.msgid.link/r/20260610-tmp-v1-1-b8ccbf557391@fb.com
Signed-off-by: Alex Mastro <amastro@fb.com>
Assisted-by: Codex:gpt-5.5-high
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Introduce vendor-specific PHY tunable identifiers to control the
KSZ87xx low-loss cable erratum handling through the ethtool PHY
tunable interface.
The following tunables are added:
- a boolean "short-cable" tunable, applying a documented and
conservative preset intended for short or low-loss Ethernet cables;
- an integer LPF bandwidth tunable, allowing advanced adjustment of the
receiver low-pass filter bandwidth;
- an integer DSP EQ initial value tunable, allowing advanced tuning of
the PHY equalizer initialization.
The actual behavior is implemented by the corresponding PHY and switch
drivers.
Reviewed-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Signed-off-by: Fidelio Lawson <fidelio.lawson@exotec.com>
Link: https://patch.msgid.link/20260609-ksz87xx_errata_low_loss_connections-v10-2-9ba4418cf3db@exotec.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an 802.3ad (LACP) bonding interface has no slaves in the
collecting/distributing state, the bonding master still reports
carrier as up as long as at least 'min_links' slaves have carrier.
In this situation, only one slave is effectively used for TX/RX,
while traffic received on other slaves is dropped. Upper-layer
daemons therefore consider the interface operational, even though
traffic may be blackholed if the lack of LACP negotiation means
the partner is not ready to deal with traffic.
Introduce a configuration knob to control this behavior. It allows
the bonding master to assert carrier only when at least 'min_links'
slaves are in Collecting_Distributing state.
The default mode preserves the existing behavior. This patch only
introduces the knob; its behavior is implemented in the subsequent
commit.
Fixes: 655f8919d5 ("bonding: add min links parameter to 802.3ad")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20260603150331.1919611-4-louis.scalbert@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When compile testing the UAPI headers with clang, there is an warning turned
error for using a C++ style ('//') comment, which is explicitly forbidden for
UAPI headers.
In file included from <built-in>:1:
./usr/include/linux/virtio_can.h:29:35: error: // comments are not allowed in this language [-Werror,-Wcomment]
29 | #define VIRTIO_CAN_MAX_DLEN 64 // this is like CANFD_MAX_DLEN
| ^
1 error generated.
Switch to a standard C style comment.
Fixes: 2b6b4bb7d96f ("can: virtio: Add virtio CAN driver")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260604-virtio_can-fix-uapi-comment-v1-1-199fa96ec5f0@kernel.org>
Add virtio CAN driver based on Virtio 1.4 specification (see
https://github.com/oasis-tcs/virtio-spec/tree/virtio-1.4). The driver
implements a complete CAN bus interface over Virtio transport,
supporting both CAN Classic and CAN-FD Ids. In term of frames, it
supports classic and CAN FD. RTR frames are only supported with classic
CAN.
Usage:
- "ip link set up can0" - start controller
- "ip link set down can0" - stop controller
- "candump can0" - receive frames
- "cansend can0 123#DEADBEEF" - send frames
Signed-off-by: Harald Mommer <harald.mommer@oss.qualcomm.com>
Co-developed-by: Harald Mommer <harald.mommer@oss.qualcomm.com>
Signed-off-by: Mikhail Golubev-Ciuchea <mikhail.golubev-ciuchea@oss.qualcomm.com>
Co-developed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Damir Shaikhutdinov <Damir.Shaikhutdinov@opensynergy.com>
Reviewed-by: Francesco Valla <francesco@valla.it>
Tested-by: Francesco Valla <francesco@valla.it>
Signed-off-by: Matias Ezequiel Vara Larsen <mvaralar@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <ahXNb+KzuHYbS24+@fedora>
There is a spelling mistake in a struct description. Fix it.
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260418-virtio-typo-v1-1-0df6f943a79d@ethancedwards.com>
When a filesystem is exported to NFS clients, NFSv4 state
(opens, locks, delegations, layouts) holds references that
prevent the underlying filesystem from being unmounted.
NFSD_CMD_UNLOCK_FILESYSTEM addresses this at superblock
granularity, but administrators unexporting a single path on a
shared filesystem (e.g., one of several exports on the same device)
need finer control.
Add NFSD_CMD_UNLOCK_EXPORT, which revokes NFSv4 state acquired
through exports of a specific path. Matching is by path identity
(dentry + vfsmount) via the sc_export field on each nfs4_stid,
so multiple svc_export objects for the same path -- one per
auth_domain -- are handled correctly without requiring the caller
to name a specific client.
The command takes a single "path" attribute. Userspace (exportfs
-u) sends this after removing the last client for a given path,
enabling the underlying filesystem to be unmounted. When multiple
clients share an export path, individual unexports do not trigger
state revocation; only the final one does.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add NFSD_CMD_UNLOCK_FILESYSTEM as a dedicated netlink command for
revoking NFS state under a filesystem path, providing a netlink
equivalent of /proc/fs/nfsd/unlock_fs.
The command requires a "path" string attribute containing the
filesystem path whose state should be released. The handler
resolves the path to its superblock, then cancels async copies,
releases NLM locks, and revokes NFSv4 state on that superblock.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The existing write_unlock_ip procfs interface releases NLM file
locks held by a specific client IP address, but procfs provides
no structured way to extend that operation to other scopes such as
revoking NFSv4 state.
Add NFSD_CMD_UNLOCK_IP as a dedicated netlink command for
releasing NLM locks by client address. The command accepts a
binary sockaddr_in or sockaddr_in6 in its address attribute.
The handler validates the address family and length, then calls
nlmsvc_unlock_all_by_ip() to release matching NLM locks. Because
lockd is a single global instance, that call operates across
all network namespaces regardless of which namespace the caller
inhabits.
A separate netlink command for filesystem-scoped unlock is added in
a subsequent commit.
The nfsd_ctl_unlock_ip tracepoint is updated from string-based
address logging to __sockaddr, which stores the binary sockaddr
and formats it with %pISpc. This affects both the new netlink path
and the existing procfs write_unlock_ip path, giving consistent
structured output in both cases.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add KVM_CAP_S390_HPAGE_2G to signal to userspace that 2G hugepages may
be used to back the guest; restrictions apply similar to 1M hugepages.
Enable the (for now still ignored) GMAP_FLAG_ALLOW_HPAGE_2G flag for
the guest gmap, and propagate / disable it as necessary.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260609150930.665370-3-imbrenda@linux.ibm.com>
Because LLC wasn't complicated/annoying enough, there's 2 more
"ethertypes" being used for it:
- 0x8870 is pretty "normal", it got standardized in
802.1AC-2016/Cor1-2018 for transporting LLC frames > 1500 bytes.
It simply replaces the length value (which is no longer encoded, and
must now be derived from the packet.) The actual value dates back to
2001; https://datatracker.ietf.org/doc/html/draft-ietf-isis-ext-eth-01
(it was used without "proper" standardization for a long time)
- 0x00fe is a doozy - actually "invalid" depending on how you look at
it; it's used in GRE (and possibly GENEVE) tunnels to transport the
IS-IS routing protocol. https://seclists.org/tcpdump/2002/q4/61 is
the best/oldest source I could find. It's inspired by the 0xfe SAP
value, a GRE packet with protocol 0x00fe is followed by a payload "as
if" it was Ethernet with "<length> 0xfe 0xfe 0x03". (Again the length
isn't encoded explicitly anymore.)
The 0x00fe value is quite close to other values the kernel is using
internally for various things (after all they "won't clash for 1500
types"). Except this one does clash, and if someone unknowingly starts
using it for something internal... we end up in a world of pain in
getting IS-IS running on GRE tunnels. Hence the "WARNING".
Signed-off-by: David 'equinox' Lamparter <equinox@diac24.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Link: https://patch.msgid.link/20260605164144.81184-1-equinox@diac24.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sven Eckelmann:
- tp_meter: initialize last_recv_time during init
- convert cancellation of work items to disable helper
- clean up wifi detection cache (3 patches)
- clean up kernel-doc: corrections, reword, typos (6 patches)
-----BEGIN PGP SIGNATURE-----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=7tLs
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-pullrequest-20260605' of https://git.open-mesh.org/batadv
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches, all by
Sven Eckelmann:
- tp_meter: initialize last_recv_time during init
- convert cancellation of work items to disable helper
- clean up wifi detection cache (3 patches)
- clean up kernel-doc: corrections, reword, typos (6 patches)
* tag 'batadv-next-pullrequest-20260605' of https://git.open-mesh.org/batadv:
batman-adv: fix kernel-doc typos and grammar errors
batman-adv: fix batadv_v_ogm_packet_recv error handling kernel-doc
batman-adv: uapi: keep kernel-doc in struct member order
batman-adv: bla: update stale kernel-doc
batman-adv: tp_meter: update stale kernel-doc after refactoring
batman-adv: correct batadv_wifi_* kernel-doc
batman-adv: document cleanup of batadv_wifi_net_devices entries
batman-adv: use GFP_KERNEL allocations for the wifi detection cache
batman-adv: drop duplicated wifi_flags assignments
batman-adv: convert cancellation of work items to disable helper
batman-adv: tp_meter: initialize last_recv_time during init
====================
Link: https://patch.msgid.link/20260605072005.490368-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add comments similar to those in include/linux/watchdog.h
so that the reader/user doesn't have to dig into the API documentation
files for this.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add a new unprivileged BTRFS_IOC_GET_CSUMS ioctl, which can be used to
query the on-disk csums for a file range.
The ioctl is deliberately per-file rather than exposing raw csum tree
lookups, to avoid leaking information to users about files they may not
have access to.
This is done by userspace passing a struct btrfs_ioctl_get_csums_args to
the kernel, which details the offset and length we're interested in, and
a buffer for the kernel to write its results into. The kernel writes a
struct btrfs_ioctl_get_csums_entry into the buffer, followed by the
csums if available. The maximum size of the user buffer is capped to
16MiB.
If the extent is an uncompressed, non-NODATASUM extent, the kernel sets
the entry type to BTRFS_GET_CSUMS_HAS_CSUMS and follows it with the
csums. If it is sparse, preallocated, or beyond the EOF, it sets the
type to BTRFS_GET_CSUMS_ZEROED - this is so userspace knows it can use
the precomputed hash of the zero sector. Otherwise, it sets the type to
BTRFS_GET_CSUMS_NODATASUM, BTRFS_GET_CSUMS_COMPRESSED,
BTRFS_GET_CSUM_ENCRYPTED, or BTRFS_GET_CSUM_INLINE.
For example, a file with a [0, 4K) hole and [4K, 12K) data extent would
produce the following output buffer:
| [0, 4K) ZEROED | [4K, 12K) HAS_CSUMS | csum data |
We do store the csums of compressed extents, but we deliberately don't
return them here: they're calculated over the compressed data, not the
uncompressed data that's returned to userspace. Similarly for encrypted
data, once encryption is supported, in which the csums will be on the
ciphertext.
The main use case for this is for speeding up mkfs.btrfs --rootdir. For
the case when the source FS is btrfs and using the same csum algorithm,
we can avoid having to recalculate the csums - in my synthetic
benchmarks (16GB file on a spinning-rust drive), this resulted in a ~11%
speed-up (218s to 196s).
When using the --reflink option added in btrfs-progs v6.16.1, we can forgo
reading the data entirely, resulting a ~2200% speed-up on the same test
(128s to 6s).
# mkdir rootdir
# dd if=/dev/urandom of=rootdir/file bs=4096 count=4194304
(without ioctl)
# echo 3 > /proc/sys/vm/drop_caches
# time mkfs.btrfs --rootdir rootdir testimg
...
real 3m37.965s
user 0m5.496s
sys 0m6.125s
# echo 3 > /proc/sys/vm/drop_caches
# time mkfs.btrfs --rootdir rootdir --reflink testimg
...
real 2m8.342s
user 0m5.472s
sys 0m1.667s
(with ioctl)
# echo 3 > /proc/sys/vm/drop_caches
# time mkfs.btrfs --rootdir rootdir testimg
...
real 3m15.865s
user 0m4.258s
sys 0m6.261s
# echo 3 > /proc/sys/vm/drop_caches
# time mkfs.btrfs --rootdir rootdir --reflink testimg
...
real 0m5.847s
user 0m2.899s
sys 0m0.097s
Another notable use case is for deduplication, where reading the
checksums may serve as a hint instead of reading the whole file data.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Adding support to use session attachment with tracing_multi link.
Adding new BPF_TRACE_FSESSION_MULTI program attach type, that follows
the BPF_TRACE_FSESSION behaviour but on the tracing_multi link.
Such program is called on entry and exit of the attached function
and allows to pass cookie value from entry to exit execution.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260606123955.345967-16-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add support to specify cookies for tracing_multi link.
Cookies are provided in array where each value is paired with provided
BTF ID value with the same array index.
Such cookie can be retrieved by bpf program with bpf_get_attach_cookie
helper call.
We need to sort cookies array together with ids array in check_dup_ids,
to keep the id->cookie relation.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260606123955.345967-15-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding new link to allow to attach program to multiple function
BTF IDs. The link is represented by struct bpf_tracing_multi_link.
To configure the link, new fields are added to bpf_attr::link_create
to pass array of BTF IDs;
struct {
__aligned_u64 ids;
__u32 cnt;
} tracing_multi;
Each BTF ID represents function (BTF_KIND_FUNC) that the link will
attach bpf program to.
We use previously added bpf_trampoline_multi_attach/detach functions
to attach/detach the link.
The linkinfo/fdinfo callbacks will be implemented in following changes.
Note this is supported only for archs (x86_64) with ftrace direct and
have single ops support.
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS &&
CONFIG_HAVE_SINGLE_FTRACE_DIRECT_OPS
Note using sort_r (instead of plain sort) in check_dup_ids, because we
will use the swap callback in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260606123955.345967-14-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding new program attach types multi tracing attachment:
BPF_TRACE_FENTRY_MULTI
BPF_TRACE_FEXIT_MULTI
and their base support in verifier code.
Programs with such attach type will use specific link attachment
interface coming in following changes.
This was suggested by Andrii some (long) time ago and turned out
to be easier than having special program flag for that.
Bpf programs with such types have 'bpf_multi_func' function set as
their attach_btf_id and keep module reference when it's specified
by attach_prog_fd.
They are also accepted as sleepable programs during verification,
and the real validation for specific BTF_IDs/functions will happen
during the multi link attachment in following changes.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260606123955.345967-11-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A recent build failure[1] exposed the diffculty of working with the
current octal and hex definitions of O_ flags when trying to find a gap
for a new flag. This difficulty is compounded by the fact that O_ flags
may have architectural specific values.
Replace the hex/octal #defines, which are hard to parse when looking for
free bits, with explicit bit shifts like (1 << 11). Also, add comments
that identify which architectures redefine some of the seemingly free
("cursed") bits in uapi/asm-generic/fcntl.h. These should not be used to
define new O_ flags (for now, at least).
The translastion was done with Claude Opus 4.8, and verified with a
(non-AI) gawk script. The accounting of which architectures claim
which bit-gaps in uapi/asm-generic/fcntl.h is also done by hand.
[1]: https://lore.kernel.org/all/agruPPybCx8q2XcJ@sirena.org.uk/
Assisted-by: Claude:Opus 4.8
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Link: https://patch.msgid.link/20260604222405.5382-1-jkoolstra@xs4all.nl
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Since there're 4 bytes padding at the end of struct bpf_prog_info, they
won't be checked by bpf_check_uarg_tail_zero().
pahole -C bpf_prog_info ./vmlinux
struct bpf_prog_info {
...
__u32 attach_btf_obj_id; /* 220 4 */
__u32 attach_btf_id; /* 224 4 */
/* size: 232, cachelines: 4, members: 38 */
/* sum members: 224 */
/* sum bitfield members: 1 bits, bit holes: 1, sum bit holes: 31 bits */
/* padding: 4 */
/* forced alignments: 9 */
/* last cacheline: 40 bytes */
} __attribute__((__aligned__(8)));
If a future kernel extension adds a new 4-byte field, older userspace
programs allocating this structure on the stack might inadvertently pass
uninitialized stack garbage into the new field, permanently breaking
backward compatibility. -- sashiko [1]
Fix it by changing sizeof(info) to
offsetofend(struct bpf_prog_info, attach_btf_id).
And, add "__u32 :32" to the tail of struct bpf_prog_info.
[1] https://lore.kernel.org/bpf/20260513224823.6494FC19425@smtp.kernel.org/
Fixes: aba64c7da9 ("bpf: Add verified_insns to bpf_prog_info and fdinfo")
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260605155249.20772-3-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a CXL DVSEC-based readiness check for Blackwell-Next GPUs alongside
the existing legacy BAR0 polling path. The CXL Device DVSEC offset is
discovered at probe time. Probe, fault and read/write paths then branch
on that to use either the legacy BAR0 polling or the CXL DVSEC polling.
The CXL path polls Memory_Active, requiring MEM_INFO_VALID within 1s and
MEM_ACTIVE within Memory_Active_Timeout (up to 256s) as per CXL spec r4.0
sec 8.1.3.8.2. Given the long worst-case wait, the CXL poll runs outside
memory_lock with only a quick readiness check is done under the lock.
The poll loops sleep with schedule_timeout_killable() and return -EINTR
on a fatal signal. This avoids hung-task panics during the long
uninterruptible wait. Extend this to the legacy based wait as well for
improvement.
In the fault handler the wait runs locklessly before memory_lock. If a
reset races in, the in-lock recheck returns -EAGAIN and the wait is
retried rather than returning a spurious VM_FAULT_SIGBUS.
Add PCI_DVSEC_CXL_MEM_ACTIVE_TIMEOUT to pci_regs.h for the timeout field.
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Suggested-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260602063015.3915-1-ankita@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Use rhashtable_lookup_likely() for lookups, rhashtable_remove_fast()
for deletes, and rhashtable_lookup_get_insert_fast() for inserts.
Updates modify values in place under RCU rather than allocating a
new element and swapping the pointer (as regular htab does). This
trades read consistency for performance: concurrent readers may
see partial updates. BPF_F_LOCK support and special-field
handling (timers, kptrs, etc.) follow in a later commit.
Initialize rhashtable with bpf_mem_alloc element cache. Require
BPF_F_NO_PREALLOC. Limit max_entries to 2^31. Free elements via
rhashtable_free_and_destroy().
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260605-rhash-v7-4-5b8e05f8630d@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow UM to bind sparsely populated memory regions by cyclically mapping
virtual ranges over a kernel-allocated dummy BO. This alternative is
preferable to the old method of handling sparseness in the UMD, because it
relied on the creation of a buffer object to the same end, despite the fact
Vulkan sparse resources don't need to be backed by a driver BO.
The choice of backing sparsely-bound regions with a Panthor BO was made so
as to profit from the existing shrinker reclaim code. That way no special
treatment must be given to the dummy sparse BOs when reclaiming memory, as
would be the case if we had chosen a raw kernel page implementation.
A new dummy BO is allocated per open file context, because even though the
Vulkan spec mandates that writes into sparsely bound regions must be
discarded, our implementation is still a workaround over the fact Mali CSF
GPUs cannot support this behaviour on the hardware level, so writes still
make it into the backing BO. If we had a global one, then it could be a
venue for information leaks between file contexts, which should never
happen in DRM.
As a side note, care was put to adjust dummy BO offsets for sparse mappings
so that all addresses in the new VA are mapped aligned against it.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20260522185206.2798288-6-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
There's no extra blank line after the last member of any other uAPI
structures, so delete it.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://patch.msgid.link/20260522185206.2798288-4-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
In future commits that will implement repeated mappings, only repeat
values multiple of GPU page sizes will be tolerated. That means these
values must be made known to UM. Do it through a queriable GPU info
value.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://patch.msgid.link/20260522185206.2798288-2-adrian.larumbe@collabora.com
Signed-off-by: Steven Price <steven.price@arm.com>
The order of the members of struct batadv_coded_packet and struct
batadv_unicast_tvlv_packet didn't match the kernel doc. This is the case
for all other structures and should also be done the same way for these
two.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Add a new netlink method to migrate a single xfrm_state.
Unlike the existing migration mechanism (SA + policy), this
supports migrating only the SA and allows changing the reqid.
The SA is looked up via xfrm_usersa_id, which uniquely
identifies it, so old_saddr is not needed. old_daddr is carried in
xfrm_usersa_id.daddr.
The reqid is invariant in the old migration.
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
By default, a GENEVE device bind()s its underlying UDP socket(s) to
the IPv4 or IPv6 wildcard address because there is no way to specify
a specific local IP address to bind() to.
This prevents deploying multiple GENEVE devices on a multi-homed host
where each device should be isolated and bound to a different local IP
address on the same UDP port.
Let's introduce new options, IFLA_GENEVE_LOCAL and IFLA_GENEVE_LOCAL6,
to allow specifying a local IPv4/IPv6 address for the backend UDP
socket.
By default, when collect metadata mode (IFLA_GENEVE_COLLECT_METADATA)
is enabled, both IPv4 and IPv6 sockets are created. However, if a
source address is specified via the new attributes, only a single
socket corresponding to that specific address family is created.
Accordingly, geneve_find_sock() and geneve_find_dev() are updated to
take the source address into account, ensuring that multiple devices
and sockets configured with different source addresses can coexist
without conflict.
In addition, the source address is validated in geneve_xmit_skb()
and geneve6_xmit_skb(), so the BPF prog must set it in bpf_tunnel_key.
With this change, multiple GENEVE devices can be successfully created
and bound to their respective local IP addresses:
(*) "local" is the keyword for IFLA_GENEVE_LOCAL / IFLA_GENEVE_LOCAL6
# for i in $(seq 1 2);
do
ip link add geneve4_${i} type geneve local 192.168.0.${i} external
ip addr add 192.168.0.${i}/24 dev geneve4_${i}
ip link set geneve4_${i} up
ip link add geneve6_${i} type geneve local 2001:9292::${i} external
ip addr add 2001:9292::${i}/64 dev geneve6_${i} nodad
ip link set geneve6_${i} up
done
# ip -d l | grep geneve
9: geneve4_1: <BROADCAST,MULTICAST,UP,LOWER_UP> ...
geneve external id 0 local 192.168.0.1 ...
10: geneve6_1: <BROADCAST,MULTICAST,UP,LOWER_UP> ...
geneve external id 0 local 2001:9292::1 ...
11: geneve4_2: <BROADCAST,MULTICAST,UP,LOWER_UP> ...
geneve external id 0 local 192.168.0.2 ...
12: geneve6_2: <BROADCAST,MULTICAST,UP,LOWER_UP> ...
geneve external id 0 local 2001:9292::2 ...
# ss -ua | grep geneve
UNCONN 0 0 192.168.0.2:geneve 0.0.0.0:*
UNCONN 0 0 192.168.0.1:geneve 0.0.0.0:*
UNCONN 0 0 [2001:9292::2]:geneve *:*
UNCONN 0 0 [2001:9292::1]:geneve *:*
Note that even if the local address is explicitly configured with
the wildcard address, kernel does not dump it except for devices with
IFLA_GENEVE_COLLECT_METADATA. This is consistent with the behaviour
of is_tnl_info_zero(), which treats the wildcard remote address as not
configured.
## ynl example.
# ./tools/net/ynl/pyynl/cli.py \
--spec ./Documentation/netlink/specs/rt-link.yaml \
--do newlink --create \
--json '{"ifname": "geneve0",
"linkinfo": {"kind":"geneve",
"data": {"local": "0.0.0.0",
"collect-metadata": true}}}'
# ./tools/net/ynl/pyynl/cli.py \
--spec ./Documentation/netlink/specs/rt-link.yaml \
--do getlink \
--json '{"ifname": "geneve0"}' --output-json | \
jq .linkinfo.data.local
"0.0.0.0"
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260602190436.139591-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Changes for v7.2
Core:
- Fixed documentation for msm_gem_shrinker functions
- IFPC related enablement/fixes for gen8
- PERFCNTR_CONFIG ioctl support
GPU
- Reworked handling of UBWC configuration
- a810 suppport
MDSS:
- Added Milos platform support
- Reworked handling of UBWC configuration
DisplayPort:
- Reworked HPD handling, preparing for the MST support
DPU:
- Added Milos platform support
- Reworked handling of UBWC configuration
DSI:
- Added Milos platform support
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <rob.clark@oss.qualcomm.com>
Link: https://patch.msgid.link/CACSVV00DXZcvFH2-C3fouve5DGs0DGa-vvsJPuaRmUZZVNKOfg@mail.gmail.com
Unlocking robust non-PI futexes happens in user space with the following
sequence:
1) robust_list_set_op_pending(mutex);
2) robust_list_remove(mutex);
lval = 0;
3) lval = atomic_xchg(lock, lval);
4) if (lval & WAITERS)
5) sys_futex(WAKE,....);
6) robust_list_clear_op_pending();
That opens a window between #3 and #6 where the mutex could be acquired by
some other task which observes that it is the last user and:
A) unmaps the mutex memory
B) maps a different file, which ends up covering the same address
When the original task exits before reaching #6 then the kernel robust list
handling observes the pending op entry and tries to fix up user space.
In case that the newly mapped data contains the TID of the exiting thread
at the address of the mutex/futex the kernel will set the owner died bit in
that memory and therefore corrupting unrelated data.
PI futexes have a similar problem both for the non-contented user space
unlock and the in kernel unlock:
1) robust_list_set_op_pending(mutex);
2) robust_list_remove(mutex);
lval = gettid();
3) if (!atomic_try_cmpxchg(lock, lval, 0))
4) sys_futex(UNLOCK_PI,....);
5) robust_list_clear_op_pending();
Address the first part of the problem where the futexes have waiters and
need to enter the kernel anyway. Add a new FUTEX_ROBUST_UNLOCK flag, which
is valid for the sys_futex() FUTEX_UNLOCK_PI, FUTEX_WAKE, FUTEX_WAKE_BITSET
operations.
This deliberately omits FUTEX_WAKE_OP from this treatment as it's unclear
whether this is needed and there is no usage of it in glibc either to
investigate.
For the futex2 syscall family this needs to be implemented with a new
syscall.
The sys_futex() case [ab]uses the @uaddr2 argument to hand the pointer to
robust_list_head::list_pending_op into the kernel. This argument is only
evaluated when the FUTEX_ROBUST_UNLOCK bit is set and is therefore backward
compatible.
This is an explicit argument to avoid the lookup of the robust list pointer
and retrieving the pending op pointer from there. User space has the
pointer already available so it can just put it into the @uaddr2
argument. Aside of that this allows the usage of multiple robust lists in
the future without any changes to the internal functions as they just operate
on the provided pointer.
This requires a second flag FUTEX_ROBUST_LIST32 which indicates that the
robust list pointer points to an u32 and not to an u64. This is required
for two reasons:
1) sys_futex() has no compat variant
2) The gaming emulators use both both 64-bit and compat 32-bit robust
lists in the same 64-bit application
As a consequence 32-bit applications have to set this flag unconditionally
so they can run on a 64-bit kernel in compat mode unmodified. 32-bit
kernels return an error code when the flag is not set. 64-bit kernels will
happily clear the full 64 bits if user space fails to set it.
In case of FUTEX_UNLOCK_PI this clears the robust list pending op when the
unlock succeeded. In case of errors, the user space value is still locked
by the caller and therefore the above cannot happen.
In case of FUTEX_WAKE* this does the unlock of the futex in the kernel and
clears the robust list pending op when the unlock was successful. If not,
the user space value is still locked and user space has to deal with the
returned error. That means that the unlocking of non-PI robust futexes has
to use the same try_cmpxchg() unlock scheme as PI futexes.
If the clearing of the pending list op fails (fault) then the kernel clears
the registered robust list pointer if it matches to prevent that exit()
will try to handle invalid data. That's a valid paranoid decision because
the robust list head sits usually in the TLS and if the TLS is not longer
accessible then the chance for fixing up the resulting mess is very close
to zero.
The problem of non-contended unlocks still exists and will be addressed
separately.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://patch.msgid.link/20260602090535.670514505@kernel.org
Make the operand defines tabular for readability sake.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://patch.msgid.link/20260602090535.615600933@kernel.org
The marker for PI futexes in the robust list is a hardcoded 0x1 which lacks
any sensible form of documentation.
Provide proper defines for the bit and the mask and fix up the usage
sites. Thereby convert the boolean pi argument into a modifier argument,
which allows new modifier bits to be trivially added and conveyed.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://patch.msgid.link/20260602090535.458758556@kernel.org
Following the previous set of fixes, this addresses another significant
number of small issues found in firmware drivers (tee, optee, qcomtee,
qcom ice, exynos acpm) drivers through various tools. This is about
error handling, resource leaks, concurrency and a use-after-free bug.
The fixes for the Qualcomm ICE driver also introduce interface changes
in the UFS and MMC drivers using it.
Outside of firmware drivers, there are a few fixes across the tree:
- Minor driver code mistakes in the Atmel EBI memory controller,
the i.MX soc ID driver and socfpga boot logic
- A defconfig change to avoid a boot time regression on multiple
qualcomm boards
- Device tree fixes for qualcomm, at91 and gemini, addressing
mostly minor configuration mistakes
-----BEGIN PGP SIGNATURE-----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=uqVQ
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Following the previous set of fixes, this addresses another
significant number of small issues found in firmware drivers (tee,
optee, qcomtee, qcom ice, exynos acpm) drivers through various tools.
This is about error handling, resource leaks, concurrency and a
use-after-free bug.
The fixes for the Qualcomm ICE driver also introduce interface changes
in the UFS and MMC drivers using it.
Outside of firmware drivers, there are a few fixes across the tree:
- Minor driver code mistakes in the Atmel EBI memory controller, the
i.MX soc ID driver and socfpga boot logic
- A defconfig change to avoid a boot time regression on multiple
qualcomm boards
- Device tree fixes for qualcomm, at91 and gemini, addressing mostly
minor configuration mistakes"
* tag 'soc-fixes-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits)
firmware: samsung: acpm: Fix infinite loop on sequence number exhaustion
firmware: samsung: acpm: Fix missing LKMM barriers in sequence allocator
firmware: samsung: acpm: Fix false timeouts and Use-After-Free in polling
ARM: dts: gemini: Fix partition offsets
ARM: socfpga: Fix OF node refcount leak in SMP setup
soc: qcom: ice: Fix the error code when 'qcom,ice' property is not found
arm64: dts: qcom: eliza: Add power-domain and iface clk for ice node
arm64: dts: qcom: milos: Add power-domain and iface clk for ice node
tee: qcomtee: add missing va_end in early return qcomtee_object_user_init()
tee: fix params_from_user() error path in tee_ioctl_supp_recv
tee: shm: fix shm leak in register_shm_helper()
tee: fix tee_ioctl_object_invoke_arg padding
arm64: defconfig: Enable PCI M.2 power sequencing driver
scsi: ufs: ufs-qcom: Remove NULL check from devm_of_qcom_ice_get()
mmc: sdhci-msm: Remove NULL check from devm_of_qcom_ice_get()
soc: qcom: ice: Return proper error codes from devm_of_qcom_ice_get() instead of NULL
soc: qcom: ice: Return -ENODEV if the ICE platform device is not found
soc: qcom: ice: Fix race between qcom_ice_probe() and of_qcom_ice_get()
ARM: dts: microchip: sam9x7: fix GMAC clock configuration
firmware: samsung: acpm: Fix mailbox channel leak on probe error
...
Previously, only the type value was settable. The proto value is used
internally for choosing the right drivers, so we should expose it. The
other values make sense to expose as well.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://patch.msgid.link/20260522015040.3953472-2-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The Arm Ethos-U NPUs have a PMU with performance counters. The PMU h/w
supports up to 4 (U65) or 8 (U85) counters which can be programmed for
different events. There is also a dedicated cycle counter.
The ABI and implementation are copied from the V3D driver. The main
difference in the ABI is there is no query API for the event list. The
events differ between the U65 and U85, so the events lists are
maintained in userspace along with other differences between the U65 and
U85.
The cycle counter is always enabled when the PMU is enabled. When the
user requests N events, reading the counters will return the N events
plus the cycle counter.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20260601173814.250071-1-tomeu@tomeuvizoso.net
---
v2:
- Use XArray instead of idr
- Rework locking to use per device spinlock to protect modifying active
perfmon. Based on pending V3D changes:
https://lore.kernel.org/all/20260508-v3d-perfmon-lifetime-v1-1-f5b5642c085f@igalia.com/
- Add missing perfmon puts in ethosu_ioctl_perfmon_set_global() and
ethosu_ioctl_perfmon_get_values() error paths.
- Fix reading number of counters on U85.
- Add defines NPU_REG_PMCCNTR_CFG
v3:
- Add explicit padding to drm_ethosu_perfmon_destroy
- Fix SPDX license expression
- Fix comment typos
- Convert perfmon lock from spinlock to mutex
- Simplify switch_perfmon condition check
- Remove unused ethosu_perfmon_init
- Add lockdep_assert_held to ethosu_perfmon_stop_locked
v4:
- Use drmm_mutex_init() for perfmon lock
- Add lockdep_assert_held() to ethosu_perfmon_start()
- Fix a few style issues reported by Maíra
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmocssAeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGsvMIAIYkDW1HujnkP3/G
SzQuQozH30O8Fpxdo+axRG6DweP2DTW1lD35YPJJsVto0G2BJZVjzsrx8RSgV6uz
DDY+Y0x0/VknMZ4JDrDoWRIyHaVV6p3+NcSHhwrxctQsa8UdEf4aXGaTf91nIBSB
GCX5R2YxxuQSTMZ19F/e+UShnRC5OO0FbCB5xhSnUJX3+eoRe0mcGAQB4DBUKxsx
BZ5DMOmoiEyPFJbdmy11X0epgJ32qgL7HPYLEo44Vcfy/Ot9lrL9b4vKbG+b3N1P
YAZccYH/dlpUuk7piR37H87Ntgz/SZcYbJlx2iAWoNk4tMmfRUO16igar8yFHjSt
FLN2Zx4=
=ufVr
-----END PGP SIGNATURE-----
Merge tag 'v7.1-rc6' into tty-next
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a new NFSD_CMD_CACHE_FLUSH generic netlink command that allows
userspace to flush the nfsd export caches (svc_export and expkey)
without writing to /proc/net/rpc/*/flush.
An optional NFSD_A_CACHE_FLUSH_MASK u32 attribute selects which caches
to flush (bit 1 = svc_export, bit 2 = expkey). If the attribute is
omitted, all nfsd caches are flushed.
This is used by exportfs to replace its /proc-based cache_flush() with a
netlink equivalent, with /proc fallback for older kernels.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add a new SUNRPC_CMD_CACHE_FLUSH generic netlink command that allows
userspace to flush the sunrpc auth caches (ip_map and unix_gid) without
writing to /proc/net/rpc/*/flush.
An optional SUNRPC_A_CACHE_FLUSH_MASK u32 attribute selects which caches
to flush (bit 1 = ip_map, bit 2 = unix_gid). If the attribute is
omitted, all sunrpc caches are flushed.
This is used by exportfs to replace its /proc-based cache_flush() with a
netlink equivalent, with /proc fallback for older kernels.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add netlink-based cache upcall support for the expkey (nfsd.fh) cache,
following the same pattern as the existing svc_export netlink support.
Add expkey to the cache-type enum, a new expkey attribute-set with
client, fsidtype, fsid, negative, expiry, and path fields, and the
expkey-get-reqs / expkey-set-reqs operations to the nfsd YAML spec
and generated headers.
Implement nfsd_nl_expkey_get_reqs_dumpit() which snapshots pending
expkey cache requests and sends each entry's seqno, client name,
fsidtype, and fsid over netlink.
Implement nfsd_nl_expkey_set_reqs_doit() which parses expkey cache
responses from userspace (client, fsidtype, fsid, expiry, and path
or negative flag) and updates the cache via svc_expkey_lookup() /
svc_expkey_update().
Wire up the expkey_notify() callback in svc_expkey_cache_template
so cache misses trigger NFSD_CMD_CACHE_NOTIFY multicast events with
NFSD_CACHE_TYPE_EXPKEY.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add netlink-based cache upcall support for the svc_export (nfsd.export)
cache to Documentation/netlink/specs/nfsd.yaml and regenerate the
resulting files.
Implement nfsd_cache_notify() which sends a NFSD_CMD_CACHE_NOTIFY
multicast event to the "exportd" group, carrying the cache type so
userspace knows which cache has pending requests.
Implement nfsd_nl_svc_export_get_reqs_dumpit() which snapshots
pending svc_export cache requests and sends each entry's seqno,
client name, and path over netlink.
Implement nfsd_nl_svc_export_set_reqs_doit() which parses svc_export
cache responses from userspace (client, path, expiry, flags, anon
uid/gid, fslocations, uuid, secinfo, xprtsec, fsid, or negative
flag) and updates the cache via svc_export_lookup() /
svc_export_update().
Wire up the svc_export_notify() callback in svc_export_cache_template
so cache misses trigger NFSD_CMD_CACHE_NOTIFY multicast events with
NFSD_CACHE_TYPE_SVC_EXPORT.
Note that the export-flags and xprtsec-mode enums are organized to match
their counterparts in include/uapi/linux/nfsd/export.h. The intent is
that future export options will only be added to the netlink headers,
which should eliminate the need to keep so much in sync.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add netlink-based cache upcall support for the unix_gid (auth.unix.gid)
cache, using the sunrpc generic netlink family.
Add unix-gid attribute-set (seqno, uid, gids multi-attr, negative,
expiry), unix-gid-reqs wrapper, and unix-gid-get-reqs /
unix-gid-set-reqs operations to the sunrpc_cache YAML spec and
generated headers.
Implement sunrpc_nl_unix_gid_get_reqs_dumpit() which snapshots pending
unix_gid cache requests and sends each entry's seqno and uid over
netlink.
Implement sunrpc_nl_unix_gid_set_reqs_doit() which parses unix_gid
cache responses from userspace (uid, expiry, gids as u32 multi-attr
or negative flag) and updates the cache via unix_gid_lookup() /
sunrpc_cache_update().
Wire up unix_gid_notify() callback in unix_gid_cache_template so
cache misses trigger SUNRPC_CMD_CACHE_NOTIFY multicast events with
SUNRPC_CACHE_TYPE_UNIX_GID.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add netlink-based cache upcall support for the ip_map (auth.unix.ip)
cache, using the sunrpc generic netlink family.
Add ip-map attribute-set (seqno, class, addr, domain, negative, expiry),
ip-map-reqs wrapper, and ip-map-get-reqs / ip-map-set-reqs operations
to the sunrpc_cache YAML spec and generated headers.
Implement sunrpc_nl_ip_map_get_reqs_dumpit() which snapshots pending
ip_map cache requests and sends each entry's seqno, class name, and
IP address over netlink.
Implement sunrpc_nl_ip_map_set_reqs_doit() which parses ip_map cache
responses from userspace (class, addr, expiry, and domain name or
negative flag) and updates the cache via __ip_map_lookup() /
__ip_map_update().
Wire up ip_map_notify() callback in ip_map_cache_template so cache
misses trigger SUNRPC_CMD_CACHE_NOTIFY multicast events with
SUNRPC_CACHE_TYPE_IP_MAP.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The auth.unix.ip and auth.unix.gid caches live in the sunrpc module,
so they cannot use the nfsd generic netlink family. Create a new
"sunrpc" generic netlink family with its own "exportd" multicast
group to support cache upcall notifications for sunrpc-resident
caches.
Define a YAML spec (sunrpc_cache.yaml) with a cache-type enum
(ip_map, unix_gid), a cache-notify multicast event, and the
corresponding uapi header.
Implement sunrpc_cache_notify() in cache.c, which checks for
listeners on the exportd multicast group, builds and sends a
SUNRPC_CMD_CACHE_NOTIFY message with the cache-type attribute.
Register/unregister the sunrpc_nl_family in init_sunrpc() and
cleanup_sunrpc().
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Userspace when requesting a session via the ioctl specifies a name and
gets a FD, but then there is no ioctl to go back the other way and get
the name given a LUO session FD. This is problematic especially when
there is a userspace orchestrator that wants to check what FDs it is
handling for clients without having to do manual string scraping of
procfs, or without procfs at all.
Add a ioctl to simply get the name from an FD.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20260429212221.814107-4-luca.boccassi@gmail.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Add a new channel type for sensors that report fractional coverage as
a percentage. The sysfs attribute is in_coverageY_raw; after applying
in_coverageY_scale the value is in percent. The first user is the
ADT7604 leak detector, where the value represents the portion of the
sensing element that is wetted.
Signed-off-by: Liviu Stan <liviu.stan@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In CoCo guests, guest memory is encrypted and untrusted (T=0) devices
cannot DMA to it directly; such transfers must go through unencrypted
bounce buffers. RDMA registers user pages for direct device access,
bypassing the DMA layer and thus any bouncing, so registered memory does
not work in this configuration.
Until trusted (T=1) device detection is available, conservatively flag
every device attached to a CoCo guest. Expose the condition to userspace
as IB_UVERBS_DEVICE_CC_DMA_BOUNCE in device_cap_flags_ex so applications
can avoid memory registration and fall back to copying buffers through
send/recv.
Link: https://patch.msgid.link/r/20260517141311.2409230-2-jiri@resnulli.us
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add an optional mlx5 driver-namespace UMEM attribute on QP
create so userspace can supply the doorbell record umem
explicitly, symmetric to the CQ side. Resolve it inside
mlx5_ib_db_map_user() and use it as a private DBR page when
present; otherwise take the existing UHW share-or-pin path
that preserves per-page DBR sharing across CQ/QP/SRQ in the
same process.
Add mlx5's first UVERBS_OBJECT_QP UAPI definition chain to
attach the new attr.
Link: https://patch.msgid.link/r/20260529134312.2836341-17-jiri@resnulli.us
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add an optional mlx5 driver-namespace UMEM attribute on CQ
create so userspace can supply the doorbell record buffer
explicitly. mlx5_ib_db_map_user() resolves the attribute (or
falls back to the legacy UHW VA) into a struct
ib_uverbs_buffer_desc and runs a unified lookup-then-pin:
VA-typed descriptors share a per-page umem across CQ/QP/SRQ
in the same process, FD-typed descriptors are pinned per call.
Link: https://patch.msgid.link/r/20260529134312.2836341-16-jiri@resnulli.us
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Apply the per-attribute UMEM model to the QP create method. Add
three optional UMEM attributes that drivers pick from based on
how their user ABI lays out the QP rings:
- CREATE_QP_BUF_UMEM is a single user buffer that backs both
the SQ and RQ of one QP. This is the common case where
userspace pins one contiguous WQE region for the QP.
- CREATE_QP_SQ_BUF_UMEM and CREATE_QP_RQ_BUF_UMEM are a pair
of user buffers backing the SQ and RQ independently, used
when the two rings live in physically distinct user
allocations and must be pinned and addressed separately.
Existing drivers would map their current umems as follows:
- mlx5: BUF for normal QPs (one ucmd->buf_addr covers SQ+RQ);
for IB_QPT_RAW_PACKET and IB_QP_CREATE_SOURCE_QPN, the RQ
side comes from ucmd->buf_addr (RQ-sized) via RQ_BUF and
the SQ from ucmd->sq_buf_addr via SQ_BUF.
- mlx4: BUF, single ucmd.buf_addr covering SQ+RQ.
- hns: BUF, single ucmd.buf_addr covering SQ + ext-SGE + RQ.
- erdma: BUF, single ureq.qbuf_va sliced by the kernel into
SQ at offset 0 and RQ at rq_offset.
- bnxt_re: SQ_BUF (ureq->qpsva) + RQ_BUF (ureq->qprva, the
RQ side is skipped when the QP uses an SRQ).
- vmw_pvrdma: SQ_BUF (sbuf_addr) + RQ_BUF (rbuf_addr, the RQ
side is skipped when the QP uses an SRQ).
- qedr: SQ_BUF (sq_addr) + RQ_BUF (rq_addr) for whichever
side the QP type actually has (no SQ for XRC_TGT/GSI; no
RQ for XRC_INI/XRC_TGT/SRQ).
- ionic: SQ_BUF (req.sq.addr) + RQ_BUF (req.rq.addr); both
are skipped when the rings are placed in CMB instead of
host memory.
- mana: raw-packet QP uses SQ_BUF (sq_buf_addr) only; the RC
path uses multiple per-queue user buffers (ucmd.queue_buf[])
that do not fit the SQ/RQ pair semantics of these attrs and
stays on the legacy UHW path.
- efa, irdma, hfi1, ocrdma, mthca, cxgb4 and usnic do not pin
a QP WQE buffer via umem; none of these attributes apply.
Link: https://patch.msgid.link/r/20260529134312.2836341-13-jiri@resnulli.us
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add UVERBS_ATTR_CREATE_CQ_BUF_UMEM and two driver-facing
wrappers, ib_umem_get_cq_buf() and ib_umem_get_cq_buf_or_va(),
that pin a CQ buffer umem from it. The wrappers reuse the
existing legacy CQ buffer-attr filler.
Link: https://patch.msgid.link/r/20260529134312.2836341-7-jiri@resnulli.us
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Introduce a per-attribute UVERBS_ATTR_UMEM model so each uverbs
command's umem set is explicit in its UAPI definition. Add
driver-facing wrapper helpers that pin a umem on demand from an
attribute or a VA addr; the driver owns the returned umem and
releases it from its destroy/error paths.
Link: https://patch.msgid.link/r/20260529134312.2836341-4-jiri@resnulli.us
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add new UABI and implementation of PERFCNTR_CONFIG ioctl.
A bit more work is required to configure the pwrup_reglist for the GMU
to restore SELect regs on exit of IFPC, before we can stop disabling
IFPC while global counter collection. This will follow in a later
commit, but will be transparent to userspace.
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Anna Maniscalco <anna.maniscalco2000@gmail.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/728217/
Message-ID: <20260526145137.160554-14-robin.clark@oss.qualcomm.com>
Add 2 struct member descriptions and convert #define macro constants
comments to kernel-doc comments to eliminate all kernel-doc warnings:
Warning: include/uapi/drm/tegra_drm.h:353 struct member 'cmdbuf' not
described in 'drm_tegra_reloc'
Warning: include/uapi/drm/tegra_drm.h:353 struct member 'target' not
described in 'drm_tegra_reloc'
Warning: include/uapi/drm/tegra_drm.h:780 This comment starts with '/**',
but isn't a kernel-doc comment.
* Specify that bit 39 of the patched-in address should be set to switch
Warning: include/uapi/drm/tegra_drm.h:832 This comment starts with '/**',
but isn't a kernel-doc comment.
* Execute `words` words of Host1x opcodes specified in the
`gather_data_ptr`
Warning: include/uapi/drm/tegra_drm.h:837 This comment starts with '/**',
but isn't a kernel-doc comment.
* Wait for a syncpoint to reach a value before continuing with further
Warning: include/uapi/drm/tegra_drm.h:842 This comment starts with '/**',
but isn't a kernel-doc comment.
* Wait for a syncpoint to reach a value before continuing with further
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260427184454.693794-1-rdunlap@infradead.org
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmoTZAYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGKZ0H/A8Ti79DXqEl4M6V
S1ZYfteuvyWCdygPfY7+CQsxS1EjfmeRXd0213n95jijUoXvAVe7HJ5FuroTltsF
LYqH3CAedeEWMO1rIZjuDs5J1BzWAh7b0/QoanTlAjI1ZL8c3Btj/o//PoQfztiS
HWlN/aCcsZTi9n0ewV9eQM9jdiuhBlpZujfDX90vYurxAB+3K2c1b0UN+Y4/zMXO
83zaDLMYhIh8cEaU52+23H9UpyfrT0B8n6YgqbU4ZBRIbgA1BC4gloT6B7OHFKfq
PAfjAOBfpe43K8lLUyfbkfNohNblLOboiMmekdf+j2y4wqpCO64o6WigCrZtxtHe
9znkJpM=
=H+I9
-----END PGP SIGNATURE-----
Merge v7.1-rc5 into drm-next
Boris Brezillion needs the gem lru fixes 379e8f1ca5 ("drm/gem: Make
the GEM LRU lock part of drm_device") backmerged for drm-misc-next.
That also means we need to sort out the rename conflict in panthor with
the fixup patch from Boris from drm-tip.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Controlled by IOMMU drivers, ATS can be enabled "on demand", when a given
PASID on a device is attached to an I/O page table. This is working, even
when a device has no translation on its RID (i.e., RID is IOMMU bypassed).
However, certain PCIe devices require non-PASID ATS on their RID even when
the RID is IOMMU bypassed. Call this "ATS always on" in IOMMU term.
For example, CXL spec r4.0 notes in sec 3.2.5.13 Memory Type on CXL.cache:
"To source requests on CXL.cache, devices need to get the Host Physical
Address (HPA) from the Host by means of an ATS request on CXL.io."
In other words, the CXL.cache capability requires ATS; otherwise, it can't
access host physical memory.
Introduce a new pci_ats_required() helper for the IOMMU driver to scan a
PCI device and shift ATS policies between "on demand" and "always on".
Add the support for CXL.cache devices first. Pre-CXL devices will be added
in quirks.c file.
Note that pci_ats_required() validates against pci_ats_supported(), so we
ensure that untrusted devices (e.g. external ports) will not be always on.
This maintains the existing ATS security policy regarding potential side-
channel attacks via ATS.
Cc: linux-cxl@vger.kernel.org
Suggested-by: Vikram Sethi <vsethi@nvidia.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nirmoy Das <nirmoyd@nvidia.com>
Acked-by: Nirmoy Das <nirmoyd@nvidia.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Most of the lls source files are missing SPDX-License-Identifier
lines. Add appropriate IDs to these files, and remove other license
info from the header. In once case, leave the existing id line
and just remove the license reference text.
Signed-off-by: Tim Bird <tim.bird@sony.com>
Link: https://patch.msgid.link/20260522225508.24006-1-tim.bird@sony.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for an optional stats struct embedded in the refill queue
region, allowing userspace to monitor copy-fallback in real-time.
Userspace queries the stats struct size and alignment via
IO_URING_QUERY_ZCRX_NOTIF (notif_stats_size / notif_stats_alignment),
then provides a stats_offset in zcrx_notification_desc pointing to a
location within the refill queue region.
The kernel updates the stats counters in-place on every copy-fallback
event.
Signed-off-by: Clément Léger <cleger@meta.com>
[pavel: rename io_uring_zcrx_notif_stats]
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/f6af5a21015efea4b733b9d77aba22c637788fe4.1779189667.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a ZCRX_NOTIF_COPY notification type to signal userspace when a
received fragment could not be delivered using zero-copy and was
instead copied into a buffer.
Signed-off-by: Clément Léger <cleger@meta.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/3d54bcd8bf10b3a1e88beb0cd39c40c3937bea4f.1779189667.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are currently no easy ways for the user to know if zcrx is out of
buffers and page pool fails to allocate. Add uapi for zcrx to communicate
it back.
It's implemented as a separate CQE, which for now is posted to the creator
ctx. To use it, on registration the user space needs to pass an instance
of struct zcrx_notification_desc, which tells the kernel the user_data
for resulting CQEs and which event types are expected / allowed.
When an allowed event happens, zcrx will post a CQE containing the
specified user_data, and lower bits of cqe->res will be set to the event
mask. Before the kernel could post another notification of the given
type, the user needs to acknowledge that it processed the previous one
by issuing IORING_REGISTER_ZCRX_CTRL with ZCRX_CTRL_ARM_NOTIFICATION.
The only notification type the patch implements is
ZCRX_NOTIF_NO_BUFFERS, but we'll need more of them in the future.
Co-developed-by: Vishwanath Seshagiri <vishs@meta.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Vishwanath Seshagiri <vishs@meta.com>
Link: https://patch.msgid.link/35cd307a03a43583838a2e151fc641c69abd786f.1779189667.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
drm-misc-next for v7.2-rc1:
UAPI Changes:
- Add VIRTIO_GPU_F_BLOB_ALIGNMENT flag.
Cross-subsystem Changes:
- Add common TMDS character rate constants to video/hdmi and use those
in bridge drivers.
Core Changes:
- Fix leak in drm_syncobj_find_fence.
- Fix OOB reads related to DP-MST.
- Create drm_get_bridge_by_endpoint and convert drivers to use it in
preparation of hotplug.
Driver Changes:
- Assorted bugfixes and cleanups to accel/ethosu, imagination, virtio,
rockchip.
- Expandable device heap support to amdxdna, bridge/chipone-icn6211.
- Add Surface Pro 12 panels.
- Convert ite-it6211 to use drm hdmi audio helpers.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/f4034e3c-8290-49e1-9410-dc1f449265f4@linux.intel.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmoTZAYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGKZ0H/A8Ti79DXqEl4M6V
S1ZYfteuvyWCdygPfY7+CQsxS1EjfmeRXd0213n95jijUoXvAVe7HJ5FuroTltsF
LYqH3CAedeEWMO1rIZjuDs5J1BzWAh7b0/QoanTlAjI1ZL8c3Btj/o//PoQfztiS
HWlN/aCcsZTi9n0ewV9eQM9jdiuhBlpZujfDX90vYurxAB+3K2c1b0UN+Y4/zMXO
83zaDLMYhIh8cEaU52+23H9UpyfrT0B8n6YgqbU4ZBRIbgA1BC4gloT6B7OHFKfq
PAfjAOBfpe43K8lLUyfbkfNohNblLOboiMmekdf+j2y4wqpCO64o6WigCrZtxtHe
9znkJpM=
=H+I9
-----END PGP SIGNATURE-----
Merge tag 'v7.1-rc5' into rdma.git for-next
For dependencies in the following patches
Resolve conflicts, use the goto labels from the rc tag.
* tag 'v7.1-rc5': (1526 commits)
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The driver supports a new comp_mask: REQ_MASK_FIXED_QUE_ATTR.
The application sets this comp_mask bit in the CREATE_QP ureq
to indicate direct control of the QP. The driver goes through
the required processing for app allocated QPs (previous patches).
Only variable WQE mode is supported for these QPs.
This patch removes an unused comp_mask:
BNXT_RE_QP_REQ_MASK_VAR_WQE_SQ_SLOTS
Link: https://patch.msgid.link/r/20260519150041.7251-10-sriharsha.basavapatna@broadcom.com
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
App allocated QPs can use a separate doorbell for each QP.
This doorbell region can be passed through a new driver specific
DBR_HANDLE attribute, during QP creation. When this attribute
is set, associate the QP with the given doorbell region.
While the QP holds a reference to the dbr, the dbr itself
cannot be destroyed and is rejected with EBUSY error.
Link: https://patch.msgid.link/r/20260519150041.7251-9-sriharsha.basavapatna@broadcom.com
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
For app allocated QPs, the driver shouldn't use slots/round-up logic
to compute the msn table size. The application handles this logic
and computes 'sq_npsn' and passes it to the driver using a new uapi
parameter.
Link: https://patch.msgid.link/r/20260519150041.7251-5-sriharsha.basavapatna@broadcom.com
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This flag indicates the path should be opened if it's a regular file.
This is useful to write secure programs that want to avoid being
tricked into opening device nodes with special semantics while thinking
they operate on regular files. This is a requested feature from the
uapi-group[1].
The previously introduced EFTYPE error code is returned when the path
doesn't refer to a regular file. For example, if openat2 is called on
path /dev/null with OPENAT2_REGULAR in the flag param, it will return
-EFTYPE.
When used in combination with O_CREAT, either the regular file is
created, or if the path already exists, it is opened if it's a regular
file. Otherwise, -EFTYPE is returned.
When OPENAT2_REGULAR is combined with O_DIRECTORY, -EINVAL is returned
as it doesn't make sense to open a path that is both a directory and a
regular file.
The UAPI bit lives in the upper 32 bits of open_how::flags
(((__u64)1 << 32)) so that open(2) and openat(2) -- whose @flags
argument is a C int -- cannot physically express it. This is a
structural guarantee, not a runtime mask: the bit is unrepresentable in
32 bits.
Because the rest of the VFS open path narrows to 32 bits in several
places (op->open_flag, f->f_flags, the unsigned open_flag argument of
i_op->atomic_open()), build_open_flags() translates OPENAT2_REGULAR
into a kernel-internal lower-32-bit carrier __O_REGULAR (bit 4, unused
as an O_* on every architecture) before the assignment to op->open_flag.
__O_REGULAR then rides through the existing channels exactly like
__FMODE_EXEC. do_dentry_open() strips it so it cannot leak back to
userspace via fcntl(F_GETFL).
Four BUILD_BUG_ON_MSG() invariants in build_open_flags() prevent any
future bit collision or accidental low-32 redefinition:
- VALID_OPEN_FLAGS fits in 32 bits.
- OPENAT2_REGULAR lives in the upper 32 bits.
- OPENAT2_REGULAR does not alias any open()/openat() flag.
- __O_REGULAR does not alias any user-visible flag.
[1]: https://uapi-group.org/kernel-features/#ability-to-only-open-regular-files
Christian Brauner <brauner@kernel.org> says:
Move OPENAT2_REGULAR to the upper 32 bits of open_how::flags with a
kernel-internal __O_REGULAR carrier so that open(2)/openat(2) cannot
encode the flag; add BUILD_BUG_ON_MSG() invariants and register
__O_REGULAR in the fcntl_init() allocation-uniqueness BUILD_BUG_ON()
(bit count 21 -> 22).
Signed-off-by: Dorjoy Chowdhury <dorjoychy111@gmail.com>
Link: https://patch.msgid.link/20260328172314.45807-2-dorjoychy111@gmail.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Aleksa Sarai <aleksa@amutable.com>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
The NXP NETC switch tag is a proprietary header added to frames after the
source MAC address. The switch tag has 3 types, and each type has 1 ~ 4
subtypes, the details are as follows.
Forward NXP switch tag (Type=0): Represents forwarded frames.
- SubType = 0 - Normal frame processing.
To_Port NXP switch tag (Type=1): Represents frames that are to be sent
to a specific switch port.
- SubType = 0. No request to perform timestamping.
- SubType = 1. Request to perform one-step timestamping.
- SubType = 2. Request to perform two-step timestamping.
- SubType = 3. Request to perform both one-step timestamping and
two-step timestamping.
To_Host NXP switch tag (Type=2): Represents frames redirected or copied
to the switch management port.
- SubType = 0. Received frames redirected or copied to the switch
management port.
- SubType = 1. Received frames redirected or copied to the switch
management port with captured timestamp at the switch port where
the frame was received.
- SubType = 2. Transmit timestamp response (two-step timestamping).
In addition, the length of different type switch tag is different, the
minimum length is 6 bytes, the maximum length is 14 bytes. Currently,
Forward tag, SubType 0 of To_Port tag and Subtype 0 of To_Host tag are
supported. More tags will be supported in the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-10-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce a new error code EFTYPE for wrong file type operations.
EFTYPE is already used in BSD systems like FreeBSD and macOS.
This will be used by the upcoming OPENAT2_REGULAR flag support to
return a specific error when a path doesn't refer to a regular file.
Signed-off-by: Dorjoy Chowdhury <dorjoychy111@gmail.com>
Link: https://patch.msgid.link/20260328172314.45807-2-dorjoychy111@gmail.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Aleksa Sarai <aleksa@amutable.com>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
To get an operable version of an O_PATH file descriptor, it is possible
to use openat(fd, ".", O_DIRECTORY) for directories, but other files
currently require going through open("/proc/<pid>/fd/<nr>"), which
depends on a functioning procfs.
This patch adds the O_EMPTYPATH flag to openat(2)/openat2(2). If passed,
LOOKUP_EMPTY is set at path resolution time.
Note: This implies that you cannot rely anymore on disabling procfs from
being mounted (e.g. inside a container without procfs mounted and with
CAP_SYS_ADMIN dropped) to prevent O_PATH fds from being re-opened
read-write.
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Link: https://patch.msgid.link/20260424114611.1678641-2-jkoolstra@xs4all.nl
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
The CAC block implements chromatic aberration correction. Expose it to
userspace using the extensible parameters format. This was tested on the
i.MX8MP platform, but based on available documentation it is also present
in the RK3399 variant (V10). Thus presumably also in later versions,
so no feature flag is introduced.
Signed-off-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260511150957.581049-1-barnabas.pocze@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The name of the enum to hold the mapping of parameter buffer versions
have a typo in the name, correct it. While this is a uAPI header the
impact should be minimal as the enum is only used as a collection for
the one version number supported.
Fixes: e9d05e9d5d ("media: uapi: rkisp1-config: Add extensible params format")
Cc: stable@vger.kernel.org
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260501190339.3449193-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add VIRTGPU_PARAM_BLOB_ALIGNMENT as a param that can be read with
VIRTGPU_GETPARAM by userspace applications running in the guest to
obtain the host's page size and find out the right alignment to be used
in shared memory allocations.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patch.msgid.link/20260428194450.518296-4-slp@redhat.com
Support VIRTIO_GPU_F_BLOB_ALIGNMENT, a feature that indicates the device
provides a valid blob_alignment field in its configuration, and that
both RESOURCE_CREATE_BLOB and RESOURCE_MAP_BLOB requests must be aligned
to that value.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patch.msgid.link/20260428194450.518296-2-slp@redhat.com
The tee_ioctl_object_invoke_arg structure has padding on some
architectures but not on x86-32 and a few others:
include/linux/tee.h:474:32: error: padding struct to align 'params' [-Werror=padded]
I expect that all current users of this are on architectures that do
have implicit padding here (arm64, arm, x86, riscv), so make the padding
explicit in order to avoid surprises if this later gets used elsewhere.
Fixes: d5b8b0fa17 ("tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Tested-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Modern systems may have more than 16 PPS sources and current hard-coded
limit breaks registration of some devices. Let's bump the limit to 256
in hope it will be enough in foreseen future.
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Link: https://patch.msgid.link/20260515135028.2021318-1-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drop comments about CEC 2.0 from cec-funcs.h.
In cec.h clearly comment messages that are CEC 2.0 specific
as such. Also rename references to HDMI 2.0 to CEC 2.0.
The <Request/Report Current Latency> messages were marked
as CEC 2.0 only. That is wrong, these messages are explicitly
allowed for any CEC version.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Link: https://patch.msgid.link/098789ee233f777d5ad87a72f09a997373c98d25.1779115235.git.hverkuil+cisco@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Message-ID: <098789ee233f777d5ad87a72f09a997373c98d25.1779115235.git.hverkuil+cisco@kernel.org>
Add support for the new Latency Indication Protocol feature.
This adds the opcodes and the wrapper functions.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Link: https://patch.msgid.link/8dac7c99b7eab4fcc11d76d50dd08fb4448672f4.1779115235.git.hverkuil+cisco@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Message-ID: <8dac7c99b7eab4fcc11d76d50dd08fb4448672f4.1779115235.git.hverkuil+cisco@kernel.org>
Freescale QUICC Engine:
- Add missing cleanup on device removal and switch to irq_domain_create_linear()
in interrupt controller for IO Ports
- Panic on ioremap() failure in qe_reset()
Freescale Management Complex:
- Move fsl-mc over to device MSI infrastructure
- Wait for the MC firmware to complete its boot
Freescale Hypervisor:
- Fix header kernel-doc warnings
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTH/wu6mIr0ZW+Vui/dkHAmvKvPUwUCad8lggAKCRDdkHAmvKvP
U3/HAQCNklj/7KSYApkif9zHTi3ITtY5YkunkfTVamnx+Ti6PgD+KE1yOnXtaumM
gbrwGcjenjhz+nuFuRRWJ8kN/SQeAwI=
=kIgf
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=2Tv8
-----END PGP SIGNATURE-----
Merge tag 'soc_fsl-7.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux into soc/drivers
FSL SOC Changes for 7.1
Freescale QUICC Engine:
- Add missing cleanup on device removal and switch to irq_domain_create_linear()
in interrupt controller for IO Ports
- Panic on ioremap() failure in qe_reset()
Freescale Management Complex:
- Move fsl-mc over to device MSI infrastructure
- Wait for the MC firmware to complete its boot
Freescale Hypervisor:
- Fix header kernel-doc warnings
* tag 'soc_fsl-7.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux:
bus: fsl-mc: wait for the MC firmware to complete its boot
soc: fsl: qe: panic on ioremap() failure in qe_reset()
soc: fsl: qe_ports_ic: switch to irq_domain_create_linear()
soc: fsl: qe_ports_ic: Add missing cleanup on device removal
virt: fsl_hypervisor: fix header kernel-doc warnings
platform-msi: Remove stale comment
fsl-mc: Remove legacy MSI implementation
fsl-mc: Switch over to per-device platform MSI
irqchip/gic-v3-its: Add fsl_mc device plumbing to the msi-parent handling
fsl-mc: Add minimal infrastructure to use platform MSI
fsl-mc: Remove MSI domain propagation to sub-devices
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The existing one-liner "Folder is case insensitive" leaves the
impression that FS_CASEFOLD_FL is reserved for directories.
That impression is wrong: filesystems that derive
case-insensitivity from mount or volume state report the bit on
non-directory inodes via i_op->fileattr_get, so userspace
inspecting FS_IOC_GETFLAGS can see it on any inode type.
Replace the one-liner with a block comment that names directories
as the typical case, records that non-directory inodes may also
report the bit, and notes FS_XFLAG_CASEFOLD as the read-only
companion exposed through FS_IOC_FSGETXATTR.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260507-case-sensitivity-v14-0-e62cc8200435@oracle.com?part=3
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260515153515.362266-5-cel@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
UAPI Changes:
- Update fourcc descriptions of BG(R) floating formats.
- Add deferred mapping support to virtio.
Cross-subsystem Changes:
- Update lontium lt9211 bindings.
Core Changes:
- Bugfixes and cleanups to pagemap, dp/mst.
- Add lockdep annotations to gpu buddy manager.
- Updates to drm/dp for PR + VRR.
- Improve documentation's table of contents.
- Bump fpfn and lpfn in ttm to 64-bits.
Driver Changes:
- Assorted bugfixes, cleanups and updates to panthor, nouveau, qaic,
hisilicon.
- Add support for CMN N116BCN-EA1, CMN N140HCA-EEK, IVO M140NWFQ R5, IVO
R140NWFW R0, BOE NT140*, BOE NV133FHM-N4F, AUO B140*, AUO B133HAN06.6 and AUO B116XTN02.3 eDP panels.
- More implementation of AIE4 in amdxdna.
- Update panels to use refcounts instead of devm_kzalloc to make
drm_panel_init static.
- Add support for the RCade Display Adapter to gud.
-----BEGIN PGP SIGNATURE-----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=UqYc
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2026-05-14' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.2-rc1:
UAPI Changes:
- Update fourcc descriptions of BG(R) floating formats.
- Add deferred mapping support to virtio.
Cross-subsystem Changes:
- Update lontium lt9211 bindings.
Core Changes:
- Bugfixes and cleanups to pagemap, dp/mst.
- Add lockdep annotations to gpu buddy manager.
- Updates to drm/dp for PR + VRR.
- Improve documentation's table of contents.
- Bump fpfn and lpfn in ttm to 64-bits.
Driver Changes:
- Assorted bugfixes, cleanups and updates to panthor, nouveau, qaic,
hisilicon.
- Add support for CMN N116BCN-EA1, CMN N140HCA-EEK, IVO M140NWFQ R5, IVO
R140NWFW R0, BOE NT140*, BOE NV133FHM-N4F, AUO B140*, AUO B133HAN06.6 and AUO B116XTN02.3 eDP panels.
- More implementation of AIE4 in amdxdna.
- Update panels to use refcounts instead of devm_kzalloc to make
drm_panel_init static.
- Add support for the RCade Display Adapter to gud.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/98788814-e462-4950-bb2a-ea493c30d0c0@linux.intel.com
This adds custom filtering for IORING_OP_CONNECT, where the target
family is always exposed, and (for AF_INET / AF_INET6) port and
address are exposed. port and v4_addr are in network byte order so
filter authors can compare against on-wire constants.
Skip population unless addr_len covers the populated fields, to
avoid leaking stale io_async_msghdr data on short connects.
Signed-off-by: Shouvik Kar <auxcorelabs@gmail.com>
Link: https://patch.msgid.link/20260512110242.26219-1-auxcorelabs@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add netlink attributes for controlling gratuitous ARP and unsolicited NA
forwarding when neighbor suppression is enabled.
Add IFLA_BRPORT_NEIGH_FORWARD_GRAT for port-level control and
BRIDGE_VLANDB_ENTRY_NEIGH_FORWARD_GRAT for per-VLAN control.
The new attributes provide independent control of gratuitous ARP and
unsolicited NA packets. Operators can enable forwarding for those packets
for fast mobility across VTEPs while keeping general neighbor suppression
active.
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260511065936.4173106-2-danieller@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add 64-bit counters for each impairment netem applies (delay, loss,
ECN marking, corruption, duplication, reordering) and for skb
allocation failures during enqueue. Exposed through TCA_STATS_APP
as struct tc_netem_xstats.
Counters increment when an impairment is occurs, independent of later
events that may mask its on-wire effect. Added allocation_errors
(similar to sch_fq) to account for when impairment could not be
applied due to memory pressure, etc.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://patch.msgid.link/20260509171123.307549-6-stephen@networkplumber.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If userspace never maps GEM object, then BO wastes hostmem space
because VirtIO-GPU driver maps VRAM BO at the BO's creating time.
Make mappings on-demand by adding new RESOURCE_CREATE_BLOB IOCTL/UAPI
hinting flag telling that host mapping should be deferred until first
mapping is made when the flag is set by userspace.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://patch.msgid.link/20260501000043.2483678-1-dmitry.osipenko@collabora.com
Commit b1798910fc7f ("drbd: move UAPI headers to include/uapi/linux/")
broke compilation on targets without a hosted libc:
./usr/include/linux/drbd.h:18:10: fatal error: sys/types.h: No such
file or directory
The underlying issue is that there were some constructs left over in
those headers that don't belong in uapi.
Drop the __KERNEL__-gated split in drbd.h. The !__KERNEL__ branch pulls
in <sys/types.h>, <sys/wait.h> and <limits.h> for symbols that the
header does not actually reference; they were carried over from when
this lived in include/linux/.
Replace <asm/types.h> and the entire #ifdef block with the standard
UAPI combo <linux/types.h> + <asm/byteorder.h>, which provides
__u32/__u64/__s32 and __{LITTLE,BIG}_ENDIAN_BITFIELD in both kernel
and userspace contexts.
drbd_limits.h references some enum values and the DRBD_PROT_C define
from drbd.h, but does not include it. Add the missing include while
we're here.
Drop the unprefixed DEBUG_RANGE_CHECK from drbd_limits.h. It has no
in-kernel users and pollutes the userspace namespace.
Switch the drbd.h and drbd_limits.h include guards to the _UAPI_LINUX_*
convention already used by drbd_genl.h.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202605101346.V2wwJqv1-lkp@intel.com/
Fixes: b1798910fc7f ("drbd: move UAPI headers to include/uapi/linux/")
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://patch.msgid.link/20260513110343.3170338-1-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
iproute2 can spend considerable amount of time in ll_init_map()
or ll_link_get() to dump verbose netdev attributes, contributing
to RTNL pressure.
Add RTEXT_FILTER_NAME_ONLY new flag so that rtnl_fill_ifinfo()
limits its output to:
- struct nlmsghdr
- IFLA_IFNAME
- IFLA_PROP_LIST (alternate names)
We can later avoid using RTNL when RTEXT_FILTER_NAME_ONLY
is requested, as none of these attributes need RTNL.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260511070244.971028-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add generic BPF syscall support for passing common attributes.
The initial set of common attributes includes:
1. 'log_buf': User-provided buffer for storing logs.
2. 'log_size': Size of the log buffer.
3. 'log_level': Log verbosity level.
4. 'log_true_size': Actual log size reported by kernel.
The common-attribute pointer and its size are passed as the 4th and 5th
syscall arguments. A new command bit, 'BPF_COMMON_ATTRS' ('1 << 16'),
indicates that common attributes are supplied.
This commit adds syscall and uapi plumbing. Command-specific handling is
added in follow-up patches.
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260512153157.28382-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Bump `KFD_IOCTL_MINOR_VERSION` from 22 to 23 and document version 1.23
in `kfd_ioctl.h` so userspace can detect profiler ioctl support.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce a new IOCTL option to allow userspace explicit control over
the Peak Tops Limiter (PTL) state for profiling
Link: https://github.com/ROCm/rocm-systems/tree/develop/projects/rocprofiler-sdk
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfd_ioctl_profiler takes a similar approach to that of
kfd_ioctl_dbg_trap (which contains debugger related IOCTL
services) where kfd_ioctl_profiler will contain all profiler
related IOCTL services. The IOCTL is designed to be expanded
as needed to support additional profiler functionality.
The current functionality of the IOCTL is to allow for profilers
which need PMC counters from GPU devices to both signal to other
profilers that may be on the system that the device has active PMC
profiling taking place on it (multiple PMC profilers on the same
device can result in corrupted counter data) and to setup the device
to allow for the collection of SQ PMC data on all queues on the device.
For PMC data for the SQ block (such as SQ_WAVES) to be available
to a profiler, mmPERFCOUNT_ENABLE must be set on the queues. When
profiling a single process, the profiler can inject PM4 packets into
each queue to turn on PERFCOUNT_ENABLE. When profiling system wide,
the profiler does not have this option and must have a way to turn
on profiling for queues in which it cannot inject packets into directly.
Accomplishing this requires a few steps:
1. Checking if the user has the necessary permissions to profile system
wide on the device. This check uses the same check that linux perf
uses to determine if a user has the necessary permissions to profile
at this scope (primarily if the process has CAP_SYS_PERFMON or is root).
2. Locking the device for profiling. This is done by setting a lock bit
on the device struct and storing the process that locked the device.
3. Iterating all queues on the device and issuing an MQD Update to enable
perfcounting on the queues.
4. Actions to cleanup if the process exits or releases the lock.
The IOCTL also contains a link to the existing PC Sampling IOCTL as well.
This is per a suggestion that we should potentially remove the PC Sampling
IOCTL to have it be a part of the profiler IOCTL. This is a future change.
In addition, we do expect to expand the profiler IOCTL to include
additional profiler functionality in the future (which necessitates the
use of a version number).
v2: sqaush in proper IOCTL number
Proposed userpace support:
40abc95a64
Signed-off-by: Benjamin Welton <benjamin.welton@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Acked-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The synclink_gt driver was marked as broken in commit 426263d5fb
("tty: synclink_gt: mark as BROKEN") in July 2023 because it had severe
structural problems and there had been no evidence of users since 2016.
Since then, no meaningful improvements have been made to the driver,
and it is unlikely that will ever happen due to the lack of interest.
Drop the driver and references to it in comments and documentation.
include/uapi/linux/synclink.h is also removed. The only use of this
header I have found is the linux-raw-sys Rust crate. It generates
bindings for all UAPI headers, but has a hardcoded list of headers and
ioctls, including this one, so that does not indicate that anyone is
using it. I have sent a pull request to remove the include and ioctl
definitions for this header (see the link below).
Link: https://github.com/sunfishcode/linux-raw-sys/pull/185
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260504031519.18877-1-enelsonmoore@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable upper layers such as NFSD to retrieve case sensitivity
information from file systems by adding FS_XFLAG_CASEFOLD and
FS_XFLAG_CASENONPRESERVING flags.
Filesystems report case-insensitive or case-nonpreserving behavior
by setting these flags directly in fa->fsx_xflags. The default
(flags unset) indicates POSIX semantics: case-sensitive and
case-preserving. Both flags are added to FS_XFLAG_RDONLY_MASK so
FS_IOC_FSSETXATTR silently strips them, keeping the new xflags
strictly a reporting interface. Callers that want to toggle
casefolding continue to use FS_IOC_SETFLAGS with FS_CASEFOLD_FL,
the established UAPI on filesystems that support the operation
(ext4 and f2fs on empty directories).
Case sensitivity information is exported to userspace via the
fa_xflags field in the FS_IOC_FSGETXATTR ioctl and file_getattr()
system call.
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Roland Mainz <roland.mainz@nrubsig.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260507-case-sensitivity-v14-2-e62cc8200435@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
The channels were described in reverse format, i.e. RGBA instead of ABGR
Signed-off-by: Robert Ancell <robert.ancell@canonical.com>
CC: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20260503235327.92428-1-robert.ancell@canonical.com
- Fix spurious failures in rseq self-tests (Mark Brown)
- Fix rseq rseq::cpu_id_start ABI regression due to
TCMalloc's creative use of the supposedly read-only field.
The fix is to introduce a new ABI variant based on
a new (larger) rseq area registration size, to keep
the TCMalloc use of rseq backwards compatible on new kernels.
(Thomas Gleixner)
- Fix wakeup_preempt_fair() for not waking up task (Vincent Guittot)
- Fix s64 mult overflow in vruntime_eligible() (Zhan Xusheng)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=2QJp
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix spurious failures in rseq self-tests (Mark Brown)
- Fix rseq rseq::cpu_id_start ABI regression due to TCMalloc's creative
use of the supposedly read-only field
The fix is to introduce a new ABI variant based on a new (larger)
rseq area registration size, to keep the TCMalloc use of rseq
backwards compatible on new kernels (Thomas Gleixner)
- Fix wakeup_preempt_fair() for not waking up task (Vincent Guittot)
- Fix s64 mult overflow in vruntime_eligible() (Zhan Xusheng)
* tag 'sched-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix wakeup_preempt_fair() for not waking up task
sched/fair: Fix overflow in vruntime_eligible()
selftests/rseq: Expand for optimized RSEQ ABI v2
rseq: Reenable performance optimizations conditionally
rseq: Implement read only ABI enforcement for optimized RSEQ V2 mode
selftests/rseq: Validate legacy behavior
selftests/rseq: Make registration flexible for legacy and optimized mode
selftests/rseq: Skip tests if time slice extensions are not available
rseq: Revert to historical performance killing behaviour
rseq: Don't advertise time slice extensions if disabled
rseq: Protect rseq_reset() against interrupts
rseq: Set rseq::cpu_id_start to 0 on unregistration
selftests/rseq: Don't run tests with runner scripts outside of the scripts
Replace the genl_magic multi-include macro system with explicit
serialization and parsing.
The *_gen files were initially produced from a YNL spec via a
customized ynl-gen-c, but the DRBD netlink family is effectively
frozen, so the generator is kept unmodified.
All new functionality will land in a separate, properly-designed
family.
Carry the resulting code as ordinary in-tree source rather than
landing the spec and generator changes that produced it.
The bulk of the changes are mechanical renames to fit the YNL naming
conventions:
- Handler functions: drbd_adm_* -> drbd_nl_*_doit/dumpit
- GENL_MAGIC_VERSION -> DRBD_FAMILY_VERSION
- GENL_MAGIC_FAMILY_HDRSZ -> sizeof(struct drbd_genlmsghdr)
- drbd_genl_family -> drbd_nl_family
- Attribute IDs: T_* -> DRBD_A_*
Remove the nested_attr_tb static global buffer and move to a per-call
allocation approach: each deserialization manages its own nested
attribute table. This will be needed anyway when we eventually move
to parallel_ops, and it's actually simpler this way, so make the
move now.
Replace the functionality of the "sensitive" flag: this was only used
by a single field (shared_secret); open-code redaction logic for that
locally.
Also replace the "invariant" flag: this only had a couple of users,
and those basically never change. Hard code the check directly inline.
The genl_family struct itself is defined manually in drbd_nl.c.
Also replace a couple of drbd-specific wrappers (nla_put_u64_0pad,
drbd_nla_find_nested) with standard kernel functions while we're at
it.
Finally, completely remove the genl_magic system; DRBD was its only
user.
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260506124541.1951772-3-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
drbd.h and drbd_limits.h contain only type definitions, enums, and
constants shared between kernel and userspace. These should be part of
UAPI.
Split the genl_api header into two: the genlmsghdr and the enums are
UAPI, the rest stays there for now (it will be removed by one of the
next commits in this series).
drbd_config.h is clearly DRBD-internal, so move it there.
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260506124541.1951772-2-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
UAPI Changes:
- Support medium/low power modes in amdxdna.
- Support limiting frequency in ivpu.
- Document license for drm core uAPI headers.
- Add the following DRM formats: P230, Y7, XYYY2101010, T430,
XVUY210101010.
Cross-subsystem Changes:
- Add and improve dt-bindings.
- Remove unused dma-fence-array's signal_on_any support.
Core Changes:
- Do not call drop_master on file close if not master.
- Convert drm-bridge and drm/atomic to use drm_printf_indent.
- Remove the extra call to drm_connector_attach_encoder after
drm_bridge_connector_init().
- Assorted docbook updates.
Driver Changes:
- Bugfixes in amdxdna, ivpu, mipi-dsi, imagination, nouveau, panthor,
bridge/analogix_dp, ipv3, lontium-lt8912b, verisilicon, tve200,
etnaviv, panel/focaltech-ota7290b, panel/jadard-jd9365da-h3,
bridge/ite-it6263, renesas, xlnx, bridge/cdns-dsi, gma500,
bridge/microchip-lvds, mgag200.
- Add support for MStar TSUMU88ADT3-LF-1 bridge.
- Add support for WaveShare 7, Novatek NT35532, Startek KD070HDFLD092,
ChipWealth CH13726A AMOLED, Team Source Display TST070WSNE-196C,
Displaytech DT050BTFT-PTS panels.
- Improve mipi-dsi shutdown and convert a panasonic panel to use the
mipi-dsi wrappers.
- Allowing dumping vbios over debugfs in GSP-RM mode.
- Update maintainers for ivpu, add reviewer for drm-bridge code
and update maintainers for LT8912B DRM HDMI bridge.
- Add test pattern support to bridge/ti-sn65dsi83.
- Convert vmwgfx to vblank timers.
- Add power management to sysfb drm drivers to allow suspend/resume.
- Support the aforementioned new drm formats in xlnx/qynqmp.
- Fix panel Kconfig dependencies.
- Add carveout support for debugging and bringup to amxdna.
- Add support for long command tx via videobuffer in bridge/tc358768.
-----BEGIN PGP SIGNATURE-----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=kWIv
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2026-05-07' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.2-rc1:
UAPI Changes:
- Support medium/low power modes in amdxdna.
- Support limiting frequency in ivpu.
- Document license for drm core uAPI headers.
- Add the following DRM formats: P230, Y7, XYYY2101010, T430,
XVUY210101010.
Cross-subsystem Changes:
- Add and improve dt-bindings.
- Remove unused dma-fence-array's signal_on_any support.
Core Changes:
- Do not call drop_master on file close if not master.
- Convert drm-bridge and drm/atomic to use drm_printf_indent.
- Remove the extra call to drm_connector_attach_encoder after
drm_bridge_connector_init().
- Assorted docbook updates.
Driver Changes:
- Bugfixes in amdxdna, ivpu, mipi-dsi, imagination, nouveau, panthor,
bridge/analogix_dp, ipv3, lontium-lt8912b, verisilicon, tve200,
etnaviv, panel/focaltech-ota7290b, panel/jadard-jd9365da-h3,
bridge/ite-it6263, renesas, xlnx, bridge/cdns-dsi, gma500,
bridge/microchip-lvds, mgag200.
- Add support for MStar TSUMU88ADT3-LF-1 bridge.
- Add support for WaveShare 7, Novatek NT35532, Startek KD070HDFLD092,
ChipWealth CH13726A AMOLED, Team Source Display TST070WSNE-196C,
Displaytech DT050BTFT-PTS panels.
- Improve mipi-dsi shutdown and convert a panasonic panel to use the
mipi-dsi wrappers.
- Allowing dumping vbios over debugfs in GSP-RM mode.
- Update maintainers for ivpu, add reviewer for drm-bridge code
and update maintainers for LT8912B DRM HDMI bridge.
- Add test pattern support to bridge/ti-sn65dsi83.
- Convert vmwgfx to vblank timers.
- Add power management to sysfb drm drivers to allow suspend/resume.
- Support the aforementioned new drm formats in xlnx/qynqmp.
- Fix panel Kconfig dependencies.
- Add carveout support for debugging and bringup to amxdna.
- Add support for long command tx via videobuffer in bridge/tc358768.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/f73f342d-6efb-416d-81b0-1716bdd98d5f@linux.intel.com
Expose the command doorbell register to userspace on a per-hardware
context basis, enabling applications to notify the firmware of pending
commands via doorbell writes.
Introduce DRM_IOCTL_AMDXDNA_WAIT_CMD to allow userspace to wait for
completion of individual commands.
Co-developed-by: Hayden Laccabue <Hayden.Laccabue@amd.com>
Signed-off-by: Hayden Laccabue <Hayden.Laccabue@amd.com>
Signed-off-by: David Zhang <yidong.zhang@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260505160936.3917732-5-lizhi.hou@amd.com
- more NAN work, mostly complete now (also hwsim)
- more UHR work (e.g. non-primary channel access),
this will continue for a while
- FTM ranging APIs
-----BEGIN PGP SIGNATURE-----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=gvrF
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Lots of new content in cfg80211/mac80211, notably
- more NAN work, mostly complete now (also hwsim)
- more UHR work (e.g. non-primary channel access),
this will continue for a while
- FTM ranging APIs
* tag 'wireless-next-2026-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (70 commits)
wifi: mac80211: explicitly disable FTM responder on AP stop
wifi: iwlwifi: don't blindly start the responder upon BSS_CHANGED_FTM_RESPONDER
wifi: mac80211_hwsim: claim HT STBC capability
wifi: mac80211_hwsim: enable NAN_DATA interface simulation support
wifi: mac80211_hwsim: Support Tx of multicast data on NAN
wifi: mac80211_hwsim: Do not declare support for NDPE
wifi: mac80211_hwsim: Declare support for secure NAN
wifi: mac80211_hwsim: add NAN data path TX/RX support
wifi: mac80211_hwsim: set HAS_RATE_CONTROL when using NAN
wifi: mac80211_hwsim: implement NAN schedule callbacks
wifi: mac80211_hwsim: add NAN PHY capabilities
wifi: mac80211_hwsim: add NAN_DATA interface limits
wifi: mac80211_hwsim: implement NAN synchronization
wifi: mac80211_hwsim: protect tsf_offset using a spinlock
wifi: mac80211_hwsim: only RX on NAN when active on a slot
wifi: mac80211_hwsim: select NAN TX channel based on current TSF
wifi: mac80211_hwsim: limit TX of frames to the NAN DW
wifi: cfg80211: don't allow NAN DATA on multi radio devices
wifi: mac80211: check AP using NPCA has NPCA capability
wifi: mac80211: don't parse full UHR operation from beacons
...
====================
Link: https://patch.msgid.link/20260506111147.224296-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
UAPI Changes:
- Expose per-client BO memory usage via fdinfo in amdxdna. (Hou)
- Change the default priority of drm scheduler to fair. (Tvrtko)
Cross-subsystem Changes:
- Revert hugetlb support in udmabuf. (Gunthorpe)
- Fix error in udmabuf with CONFIG_DMA_API_DEBUG(/ _SG). (Gavrilov)
- Add Docbook for DRM_IOCTL_SYNCOBJ_EVENTFD, (Ser)
clarify drm_bridge_get/put. (Tvrtko)
- Change signature of drm_connector_attach_hdr_output_metadata_property. (Canal)
- Use IOVA allocations in gpusvm and pagemap APIs. (Brost)
- Fix tracepoints vs dma-fence lifetime. (Tvrtko)
- Convert st-dma*.c tests to use kunit. (Gunthorpe)
Core Changes:
- Deduplicate counter and timestamp retrieval in vblank code. (Ville)
- Parse AMD VSDB v3 in CTA extension blocks, and use it in amdgpu. (Chen)
- Prevent bridge and encoder chain changes at inopportune times. (Ceresoli)
- Map the run queue 1:1 to the drm scheduler. (Tvrtko)
Driver Changes:
- Assorted bugfixes and (documentation) updates to rockchip, bridge/synopsis,
panfrost, tidss, accel/qaic, tilcdc, vc4, ast, imagination, panthor,
renesas, accel/amdxdna, msxfb, bridge/imx8mp, nouveau.
bridge/analogix_dp, bridge/exynos_dp, omap.
- Add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1, panels.
- Add support for a lot of waveshare panels (Baryshkov)
- Support for AIE4 devices in accel/wamdxdna. (Zhang)
- Enable support for GEM shrinking in panthor. (Goel/Brezillon)
- Runtime Power Management is added to v3d. (Canal)
- Allow panel probing and use the panel bridge helper in analogix_dp. (Ding)
- Support XRGB1555 and C8 in mgag and XRGB1555 in ast. (Zimmermann)
-----BEGIN PGP SIGNATURE-----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=T0tH
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2026-04-20' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.1-rc1:
UAPI Changes:
- Expose per-client BO memory usage via fdinfo in amdxdna. (Hou)
- Change the default priority of drm scheduler to fair. (Tvrtko)
Cross-subsystem Changes:
- Revert hugetlb support in udmabuf. (Gunthorpe)
- Fix error in udmabuf with CONFIG_DMA_API_DEBUG(/ _SG). (Gavrilov)
- Add Docbook for DRM_IOCTL_SYNCOBJ_EVENTFD, (Ser)
clarify drm_bridge_get/put. (Tvrtko)
- Change signature of drm_connector_attach_hdr_output_metadata_property. (Canal)
- Use IOVA allocations in gpusvm and pagemap APIs. (Brost)
- Fix tracepoints vs dma-fence lifetime. (Tvrtko)
- Convert st-dma*.c tests to use kunit. (Gunthorpe)
Core Changes:
- Deduplicate counter and timestamp retrieval in vblank code. (Ville)
- Parse AMD VSDB v3 in CTA extension blocks, and use it in amdgpu. (Chen)
- Prevent bridge and encoder chain changes at inopportune times. (Ceresoli)
- Map the run queue 1:1 to the drm scheduler. (Tvrtko)
Driver Changes:
- Assorted bugfixes and (documentation) updates to rockchip, bridge/synopsis,
panfrost, tidss, accel/qaic, tilcdc, vc4, ast, imagination, panthor,
renesas, accel/amdxdna, msxfb, bridge/imx8mp, nouveau.
bridge/analogix_dp, bridge/exynos_dp, omap.
- Add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1, panels.
- Add support for a lot of waveshare panels (Baryshkov)
- Support for AIE4 devices in accel/wamdxdna. (Zhang)
- Enable support for GEM shrinking in panthor. (Goel/Brezillon)
- Runtime Power Management is added to v3d. (Canal)
- Allow panel probing and use the panel bridge helper in analogix_dp. (Ding)
- Support XRGB1555 and C8 in mgag and XRGB1555 in ast. (Zimmermann)
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/bf31b1a1-951b-4f60-b226-22e8c083697d@linux.intel.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
Add the necessary fields to the chandef data structure
to represent NPCA (the NPCA primary channel and NPCA
punctured/disabled subchannels bitmap), and the code
to check these for validity, compatibility, as well as
allowing it to be passed for AP mode for capable
devices.
Compatibility is assumed to only be the case when it's
actually identical, enabling later management of this
in channel contexts in mac80211 for multiple APs, but
requiring userspace to set up the identical chandef on
all AP interfaces that share a channel (and BSS color.)
Link: https://patch.msgid.link/20260428112708.46f3872aeb35.I85888dab88a6659ba52db4b3318979ca5bcfc0c8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For UHR, multi-link power-management capability lives there, and
so it's needed that hostapd knows what to advertise, and clients
should have it shown to userspace for information.
Repurpose the existing NL80211_ATTR_ASSOC_MLD_EXT_CAPA_OPS by
renaming it to NL80211_ATTR_EXT_MLD_CAPA_AND_OPS (with a define
for compatibility) and advertise the capabilities.
We can also later use the value, if needed, to set per-station
capabilities on STAs added to AP interfaces.
Link: https://patch.msgid.link/20260428110915.e808e70feed6.I378a7c017bfc1ebb072fa8d5d1db2ac9b45596c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add the constants associated with RS-FEC configuration
and status as well as the indicated separated bits for
DEVS1 to convey a separated PMA.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Mike Marciniszyn (Meta) <mike.marciniszyn@gmail.com>
Link: https://patch.msgid.link/20260430150802.3521-2-mike.marciniszyn@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently there is no way to install an LTF key seed that can be
used in non-trigger-based (NTB) and trigger-based (TB) FTM ranging
to protect NDP frames. Without this, drivers cannot enable PHY-layer
security for peer measurement sessions, leaving ranging measurements
vulnerable to eavesdropping and manipulation.
Introduce NL80211_KEY_LTF_SEED attribute and the dedicated extended
feature flag NL80211_EXT_FEATURE_SET_KEY_LTF_SEED to allow drivers
to advertise and install LTF key seeds via nl80211. The key seed
must be configured beforehand to ensure the peer measurement session
is secure. The driver must advertise both NL80211_EXT_FEATURE_SECURE_LTF
and NL80211_EXT_FEATURE_SET_KEY_LTF_SEED for the key seed installation
to be permitted.
The LTF key seed is pairwise key material and must only be used with
pairwise key type. Reject attempts to use it with other key types.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-13-peddolla.reddy@oss.qualcomm.com
[fix policy coding style]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Proximity detection often does not require detailed ranging
measurements, yet userspace currently receives full FTM results for
every request, causing unnecessary data transfer, host wakeups, and
processing overhead.
Add an optional control to suppress ranging result reporting for
peer-to-peer PD requests. Introduce the
NL80211_PMSR_FTM_REQ_ATTR_PD_SUPPRESS_RESULTS flag; when set with a
PD request, the device may perform the measurements (e.g. when acting
as RSTA) but must not report the measurement results to userspace.
Validate that the flag is only accepted when request_type is set to
NL80211_PMSR_FTM_REQ_TYPE_PD, reject otherwise.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-12-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Devices may support different preamble and bandwidth configurations
for proximity detection (PD) ranging versus standard ranging. Add
separate pd_preambles and pd_bandwidths fields to
cfg80211_pmsr_capabilities to allow drivers to advertise PD-specific
capabilities.
Expose these over nl80211 using new attributes
NL80211_PMSR_FTM_CAPA_ATTR_PD_PREAMBLES and
NL80211_PMSR_FTM_CAPA_ATTR_PD_BANDWIDTHS, advertised only when
pd_support is set.
For PD requests, validate bandwidth and preamble against pd_bandwidths
and pd_preambles. For non-PD requests, validate against the existing
bandwidths and preambles fields.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-11-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Proximity detection applications need to receive measurement results
only when devices cross specific distance boundaries to avoid
unnecessary host wakeups and reduce power consumption.
Introduce configurable distance-based reporting thresholds that
drivers can use to implement selective result reporting. Add ingress
and egress distance parameters allowing applications to specify when
results should be reported as peers cross these boundaries.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-10-peddolla.reddy@oss.qualcomm.com
[remove mm units from variables]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Peer measurement capabilities currently advertise a single maximum
peer count regardless of device role. Some devices support different
peer limits when operating as initiator versus responder.
Add max_peers fields inside the ftm.ista and ftm.rsta sub-structs of
cfg80211_pmsr_capabilities to allow drivers to advertise per-role peer
limits. These limits are generic and not restricted to any specific
ranging type.
Expose these over nl80211 using new NL80211_PMSR_ATTR_MAX_PEER_ISTA_ROLE
and NL80211_PMSR_ATTR_MAX_PEER_RSTA_ROLE attributes inside the
ISTA_CAPS and RSTA_CAPS nested attributes respectively.
When a role limit is advertised, validate the number of peers in the
request separately for each role using the existing rsta flag in the
FTM request, and reject the request if the limit is exceeded.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-9-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Applications need negotiated session parameters to interpret
proximity ranging results and perform post-processing. Currently,
the FTM response lacks LTF repetition counts, time constraints,
spatial stream configuration, and availability window parameters.
Extend the FTM response structure to report these negotiated
parameters, enabling applications to track session configuration
and use them in post-processing to increase ranging precision.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-8-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Enable NTB continuous ranging with configurable timing and measurement
parameters as per the Wi-Fi Alliance specification "Proximity Ranging
(PR) Implementation Consideration Draft 1.9 Rev 1, section 5.3". Add
new FTM request attributes for min/max time between measurements,
nominal time (mandatory for NTB), AW duration, and total measurement
count.
Add NL80211_PMSR_PEER_ATTR_REQ_TYPE attribute using the new
nl80211_peer_measurement_ftm_req_type enum to allow userspace to
specify the ranging request type per peer:
- NL80211_PMSR_FTM_REQ_TYPE_INFRA: STA-to-AP or AP-to-STA ranging
(default if attribute is absent)
- NL80211_PMSR_FTM_REQ_TYPE_PD: peer-to-peer ranging
Validate the request type against the device TYPE_CAPS capabilities
advertised via NL80211_PMSR_FTM_CAPA_ATTR_TYPE_CAPS. Reject PD
requests if the device does not advertise PD support.
Reject PD requests that set trigger-based ranging, as TB ranging is
not compatible with peer-to-peer proximity detection.
Add ftms_per_burst limit of 4 for PD NTB ranging requests.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-7-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Introduce Proximity Detection (PD) capabilities in Peer Measurement
Service (PMSR) as defined in the Wi-Fi Alliance specification
"Proximity Ranging (PR) Implementation Consideration Draft 1.9 Rev 1
section 3.3". This enables devices to advertise peer to peer ranging
support.
Restructure FTM capabilities in cfg80211_pmsr_capabilities to replace
the single support_rsta flag with nested ista and rsta sub-structs,
each carrying per-mode flags for Non-Trigger Based (NTB), Trigger Based
(TB), and EDCA based ranging. This allows drivers to advertise detailed
role and protocol support for both initiator and responder roles.
Add support to pass additional ISTA and RSTA role capabilities to
userspace using new nested ISTA_CAPS and RSTA_CAPS attributes. The
legacy RSTA_SUPPORT flag is retained for backward compatibility.
Add NL80211_PMSR_FTM_CAPA_ATTR_TYPE_CAPS nested attribute using the
nl80211_peer_measurement_ftm_type_capa enum with two sub-flags:
NL80211_PMSR_FTM_TYPE_CAPA_ATTR_INFRA_SUPPORT for STA-to-AP or
AP-to-STA ranging, and NL80211_PMSR_FTM_TYPE_CAPA_ATTR_PD_SUPPORT
for peer-to-peer ranging.
Add CONCURRENT_ISTA_RSTA_SUPPORT as a FTM capability flag indicating
the device can simultaneously act as initiator and responder in a
multi-peer measurement request.
Extend FTM capabilities with antenna configuration fields
(max_no_of_tx_antennas, max_no_of_rx_antennas) for the PR Element
during PASN negotiation, and ranging interval limits
(min_allowed_ranging_interval_edca, min_allowed_ranging_interval_ntb)
to advertise device timing constraints for EDCA and NTB-based ranging.
Update the FTM request validation path in pmsr.c to check RSTA
requests against the per-mode rsta capabilities (NTB, TB, EDCA),
rejecting requests for modes the device does not support.
Co-developed-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-6-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, the proximity detection (PD) interface type has no
start/stop commands defined, preventing user space from
controlling PD operations through the nl80211 interface.
Add NL80211_CMD_START_PD and NL80211_CMD_STOP_PD commands to
allow user space to start and stop a PD interface. Add the
corresponding start_pd and stop_pd operations to cfg80211_ops
and ieee80211_ops, along with nl80211 command handlers, rdev
wrappers, and tracing support. Validate that drivers advertising
PD interface support implement the required operations. Handle
PD interface teardown during device unregistration and when
the interface leaves the network.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-5-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a new wdev-only interface type NL80211_IFTYPE_PD to support
Proximity Detection (PD) operations such as PASN and peer measurement
operations. This interface type operates without a netdev, similar to
P2P_DEVICE and NAN interfaces.
Implement support across cfg80211 and mac80211 layers with PD-specific
checks gated by the NL80211_EXT_FEATURE_SECURE_RTT feature flag,
management frame registration and transmission capabilities, and proper
channel context handling where PD interfaces are excluded from bandwidth
calculations. Update mac80211 to recognize the new interface type in the
relevant paths for this management-only interface.
PD discovery can be performed on any available interface, such as
NL80211_IFTYPE_STATION.
If PD/PMSR uses the MAC address of an existing interface type, such as
NL80211_IFTYPE_STATION, then pairing and measurement shall use that
same interface. If PD/PMSR uses a different MAC address, such as a
random MAC address, then pairing and measurement can be performed on a
new NL80211_IFTYPE_PD interface created with that random MAC address.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-4-peddolla.reddy@oss.qualcomm.com
[fix comment style]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently the remain_on_channel operation does not support
filtering incoming frames by destination MAC address. This
prevents use cases such as PASN authentication in the
responder side that need to receive frames addressed to a
specific MAC during the off-channel period.
Add an rx_addr parameter to the remain_on_channel operation
callback and propagate it through the call chain from nl80211
to driver implementations. Introduce the extended feature
NL80211_EXT_FEATURE_ROC_ADDR_FILTER as a capability gate so
that cfg80211 rejects the request if the driver does not
advertise support for address filtering. Extract the address
from the NL80211_ATTR_MAC attribute when provided in the
netlink message and update the tracing infrastructure to
include the address in remain_on_channel trace events. The
rx_addr parameter is optional and can be NULL, maintaining
backward compatibility with existing drivers.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-3-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add XVUY2101010, a 10 bits per component YCbCr format in a 32 bit
container.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Vishal Sagar <vishal.sagar@amd.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20260423-xilinx-formats-v10-6-c690c2b8ea89@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Add T430, a 3 plane 10 bits per component non-subsampled YCbCr format.
A new initial letter was chosen for this one, as the format doesn't
match the existing P, Q or S formats. T is the next one in the alphabet.
It was definitely not chosen because of the initial letter in the
author's name.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Vishal Sagar <vishal.sagar@amd.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20260423-xilinx-formats-v10-5-c690c2b8ea89@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Add XYYY2101010 ("YPA4"), a 10 bit greyscale format, with 3 pixels
packed into 32-bit container, and two bits of padding.
The fourcc for the format is 'YPA4', which comes from Y - Y only, P -
packed, A - 10 (as in 0xA), 4 - 4 bytes.
Reviewed-by: Vishal Sagar <vishal.sagar@amd.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20260423-xilinx-formats-v10-4-c690c2b8ea89@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Add greyscale Y8 format.
The 8-bit greyscale format has been discussed before, and the earlier
guidance was to use DRM_FORMAT_R8, as a single-channel 8-bit pixel.
However, adding DRM_FORMAT_Y8 makes sense, we can mark it as 'is_yuv' in
the drm_format_info, and this can help the drivers handle e.g.
full/limited range. This will distinguish two single-channel formats:
R8, which is a RGB format with the same value for all components, and
Y8, which is a Y-only YCbCr format, with Cb and Cr being neutral.
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Vishal Sagar <vishal.sagar@amd.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20260423-xilinx-formats-v10-3-c690c2b8ea89@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Add a new pixel format, DRM_FORMAT_P230 ("P230")
P230 is 2 plane 10 bit per component YCbCr 2x1 subsampled format. P230
is similar to the already existing P030 format, which is 2x2 subsampled.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Vishal Sagar <vishal.sagar@amd.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20260423-xilinx-formats-v10-2-c690c2b8ea89@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
In SME-in-driver mode, the driver handles the entire (re)association
exchange. Userspace (e.g., wpa_supplicant) currently has no explicit
indication of whether the (re)association exchange was encrypted,
making it difficult to distinguish EPP (Enhanced Privacy Protection,
IEEE 802.11bi) associations from non-EPP associations.
When (Re)Association frame encryption is used, the (Re)Association
Response frame must contain a Key Delivery element as specified in
IEEE P802.11bi/D4.0, Table 9-65. Userspace must process this element
only when the (Re)Association Response frame is actually encrypted.
Processing it unconditionally for unencrypted frames leads to incorrect
behavior. Without an explicit indication from the driver, userspace
cannot determine whether encryption was used and whether the Key
Delivery element is valid.
Add a new flag attribute NL80211_ATTR_ASSOC_ENCRYPTED and a
corresponding field "assoc_encrypted" in cfg80211_connect_resp_params
to indicate that both the (Re)Association Request and Response frames
are transmitted encrypted over the air.
For mac80211-based drivers, extend cfg80211_rx_assoc_resp_data with
the assoc_encrypted field as well, which is then propagated to
cfg80211_connect_resp_params.
Pass the flag to userspace via NL80211_CMD_CONNECT event.
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Link: https://patch.msgid.link/20260504123624.529218-2-kavita.kavita@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The DRM core uAPI headers are licensed under the MIT license, and carry
copies of the license with slight variations. Replace them with SPDX
headers.
Following a discussion with Simona Vetter on this topic, add a
clarification in the drm-uapi.rst file that independent closed-source
userspace implementations of software using the DRM uAPI are accepted,
as allowed by the MIT license.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260407104951.1781047-1-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
- Debugfs multi-LRC engine info (Xin Wang, 2 commits)
Expose multi-LRC engine classes in the debugfs engine info output
and improve the output readability.
- drm/drm_ras: Add clear-error-counter netlink command to drm_ras
Cross-subsystem Changes:
Core Changes:
- drm/gpusvm: Reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges
- drm/i915/display: switch to including common step file directly
Driver Changes:
- Engine initialization cleanup (Matt Roper, 10 commits)
Clean up engine initialization code inherited from i915 by moving
hardware programming (CCS enablement, HWSTAM, GFX_MODE, BLIT_CCTL,
STOP_RING) into the RTP infrastructure. This makes the programming
visible and verifiable via debugfs, and applies consistently across
both normal and execlist init paths. Also fixes the name/definition
of GFX_MODE, marks BCS engines as belonging to the GT forcewake
domain, and drops the now-unused xe_hw_engine_mmio_write32() helper.
- PF fair scheduling auto-provisioning (Michal Wajdeczko, 13 commits)
Fix several corner cases in SR-IOV PF scheduling policy provisioning,
then auto-provision PF and all VFs with 16ms execution-quantum and
preemption-timeout defaults. This prevents a VF from monopolizing
the GPU by submitting workloads without gaps, without requiring the
user to configure sysfs manually.
- System Controller support for CRI/Xe3p (Anoop Vijay + Raag Jadav, 10 commits)
Add xe_sysctrl infrastructure for communicating with the System
Controller firmware entity on CRI/Xe3p discrete GPU platforms via a
mailbox interface. Includes type definitions, register definitions,
mailbox communication, initialization, power management, interrupt
handling, and event dispatch. Builds on this to add initial RAS
correctable error handling, using sysctrl interrupts to receive
threshold-crossed events.
- PXP state machine fixes (Daniele Ceraolo Spurio, 4 commits)
Fix PXP state machine handling: reject PXP sessions on PTL platforms
with older GSC firmware that does not support it, fix the restart
flag not being cleared after jumping back in pxp_start, remove
incorrect handling of an impossible state during suspend, and clean
up termination status on failure.
- Reset/wedge/unload corner case fixes (Zhanjun Dong + Matthew Brost, 5 commits)
Fix memory leaks and fence signal failures that occurred during GPU
reset, device wedging, and driver unload by forcefully tearing down
remaining exec queues in GuC submit fini, always killing queues in
pause/abort, and triggering queue cleanup when not in wedged mode 2.
Also ensures GuC CT state transitions via STOP before DISABLED.
- Wedge path memory allocation fixes (Matthew Brost, 3 commits)
Avoid GFP_KERNEL allocations in xe_device_declare_wedged(), which
runs in the DMA-fence signaling path. Also drops the
guc_submit_wedged_fini devm registration from xe_guc_submit_wedge()
to clean up the wedge shutdown sequence.
- PAT type cleanup and invalid index hardening (Xin Wang, 3 commits)
Standardize pat_index fields to u16 across the driver, default
XE_CACHE_NONE_COMPRESSION to XE_PAT_INVALID_IDX (matching
WB_COMPRESSION), and introduce xe_cache_pat_idx() — a macro helper
that validates cache_mode bounds and asserts on invalid PAT indices
before returning the index.
- Reject unsafe PAT indices for CPU cached memory (Jia Yao, 2 commits)
Reject incoherent (coh_none) PAT indices for CPU cached memory in
both the madvise ioctl and vm_bind with CPU_ADDR_MIRROR flag, closing
a security gap where the GPU could bypass CPU caches and observe
stale or sensitive data.
- OA improvements for CRI device memory (Ashutosh Dixit, 3 commits)
Move OA buffer access to the xe_map layer to support both system and
device memory (required for CRI), switch OA buffer mmap to use
drm_gem_mmap_obj, and implement workaround Wa_14026633728.
- xe_drm.h documentation fixes (Shuicheng Lin, 6 commits)
Fix multiple documentation issues in the xe_drm.h UAPI header:
typos, spelling errors, grammar, wrong names and references,
kernel-doc cross-reference syntax, and broken code examples.
- kernel-doc syntax fixes in xe headers (Shuicheng Lin, 4 commits)
Fix kernel-doc syntax issues across xe header files: missing '@'
prefixes on member tags, stale/mismatched member tags, comment
syntax errors, and type/parameter name mismatches in references.
- Buffer object and DMA-buf resource leak fixes (Shuicheng Lin, 4 commits)
Fix resource leaks on error paths: DMA-buf attachment leak in
xe_gem_prime_import(), BO leak in xe_dma_buf_init_obj() on
allocation failure, and BO leaks in xe_bo_init_locked() on GGTT
flag validation and unaligned size validation failures.
- Include guard cleanup (Shuicheng Lin, 5 commits)
Fix and standardize include guards across xe header files: normalize
double-underscore guards to single, add missing leading/trailing
underscores, add missing _H suffixes, and add guards to previously
unprotected headers.
- VF CCS memory pool (Satyanarayana K V P, 2 commits)
Switch VF CCS read/write operations from the DRM sub-allocator to
DRM mm, fixing allocation failures in fence-disabled mode where
the sub-allocator's hole cursor assumption breaks. Also introduces
a general BO-backed memory pool with shadow support using drm_mm.
- i915/xe step definition unification (Jani Nikula, 3 commits)
Complete the migration to the shared intel_step header: switch xe
from its own xe_step enum to the shared intel_step naming and
definitions, and update i915 display code to include the common
step header directly.
- Xe3p GT tuning fixes (3 commits)
Three Xe3p GT tuning corrections: fix the register offset for
GAMSTLB_CTRL, stop applying the CCCHKNREG1 tuning from Xe3p onward
(no longer needed), and mark ROW_CHICKEN5 as a masked register.
- Forcewake cleanup in GT and GuC PC (Raag Jadav, 3 commits)
Drop a redundant forcewake reference in xe_gt, reorder forcewake
usage in xe_guc_pc_fini_hw() to avoid a redundant hold, and convert
xe_guc_pc_stop() to void since it can no longer fail.
- SVM garbage collector fix on close (Matthew Brost, 2 commits)
Disable the SVM garbage collector work item when an SVM is closed
to prevent use-after-free when the GC fires after the SVM is freed.
- Admin-only PF mode (Satyanarayana K V P, 2 commits)
Derive an "admin-only PF" mode flag from xe_device state instead of
using a local flag, and restrict device query responses when running
in admin-only PF mode to avoid exposing internal state.
- Enable hwmon energy attributes and accepted power limit for CRI (2 commits)
Enable energy consumption hwmon attributes for the CRI platform and
add support for reading the accepted (sustained) power limit via
hwmon.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCafNROQAKCRC4FpNVCsYG
v31cAQCS/7wH9kwyUxQZOgs/HfuZvbgu5IyrGxaDSrHY7twRtAD7BhvkfOcyB9VK
6M2a7Y+QiVICgwjuDiwXikJalmRBmQE=
=Y9j3
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2026-04-30' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Debugfs multi-LRC engine info (Xin Wang, 2 commits)
Expose multi-LRC engine classes in the debugfs engine info output
and improve the output readability.
- drm/drm_ras: Add clear-error-counter netlink command to drm_ras
Cross-subsystem Changes:
Core Changes:
- drm/gpusvm: Reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges
- drm/i915/display: switch to including common step file directly
Driver Changes:
- Engine initialization cleanup (Matt Roper, 10 commits)
Clean up engine initialization code inherited from i915 by moving
hardware programming (CCS enablement, HWSTAM, GFX_MODE, BLIT_CCTL,
STOP_RING) into the RTP infrastructure. This makes the programming
visible and verifiable via debugfs, and applies consistently across
both normal and execlist init paths. Also fixes the name/definition
of GFX_MODE, marks BCS engines as belonging to the GT forcewake
domain, and drops the now-unused xe_hw_engine_mmio_write32() helper.
- PF fair scheduling auto-provisioning (Michal Wajdeczko, 13 commits)
Fix several corner cases in SR-IOV PF scheduling policy provisioning,
then auto-provision PF and all VFs with 16ms execution-quantum and
preemption-timeout defaults. This prevents a VF from monopolizing
the GPU by submitting workloads without gaps, without requiring the
user to configure sysfs manually.
- System Controller support for CRI/Xe3p (Anoop Vijay + Raag Jadav, 10 commits)
Add xe_sysctrl infrastructure for communicating with the System
Controller firmware entity on CRI/Xe3p discrete GPU platforms via a
mailbox interface. Includes type definitions, register definitions,
mailbox communication, initialization, power management, interrupt
handling, and event dispatch. Builds on this to add initial RAS
correctable error handling, using sysctrl interrupts to receive
threshold-crossed events.
- PXP state machine fixes (Daniele Ceraolo Spurio, 4 commits)
Fix PXP state machine handling: reject PXP sessions on PTL platforms
with older GSC firmware that does not support it, fix the restart
flag not being cleared after jumping back in pxp_start, remove
incorrect handling of an impossible state during suspend, and clean
up termination status on failure.
- Reset/wedge/unload corner case fixes (Zhanjun Dong + Matthew Brost, 5 commits)
Fix memory leaks and fence signal failures that occurred during GPU
reset, device wedging, and driver unload by forcefully tearing down
remaining exec queues in GuC submit fini, always killing queues in
pause/abort, and triggering queue cleanup when not in wedged mode 2.
Also ensures GuC CT state transitions via STOP before DISABLED.
- Wedge path memory allocation fixes (Matthew Brost, 3 commits)
Avoid GFP_KERNEL allocations in xe_device_declare_wedged(), which
runs in the DMA-fence signaling path. Also drops the
guc_submit_wedged_fini devm registration from xe_guc_submit_wedge()
to clean up the wedge shutdown sequence.
- PAT type cleanup and invalid index hardening (Xin Wang, 3 commits)
Standardize pat_index fields to u16 across the driver, default
XE_CACHE_NONE_COMPRESSION to XE_PAT_INVALID_IDX (matching
WB_COMPRESSION), and introduce xe_cache_pat_idx() — a macro helper
that validates cache_mode bounds and asserts on invalid PAT indices
before returning the index.
- Reject unsafe PAT indices for CPU cached memory (Jia Yao, 2 commits)
Reject incoherent (coh_none) PAT indices for CPU cached memory in
both the madvise ioctl and vm_bind with CPU_ADDR_MIRROR flag, closing
a security gap where the GPU could bypass CPU caches and observe
stale or sensitive data.
- OA improvements for CRI device memory (Ashutosh Dixit, 3 commits)
Move OA buffer access to the xe_map layer to support both system and
device memory (required for CRI), switch OA buffer mmap to use
drm_gem_mmap_obj, and implement workaround Wa_14026633728.
- xe_drm.h documentation fixes (Shuicheng Lin, 6 commits)
Fix multiple documentation issues in the xe_drm.h UAPI header:
typos, spelling errors, grammar, wrong names and references,
kernel-doc cross-reference syntax, and broken code examples.
- kernel-doc syntax fixes in xe headers (Shuicheng Lin, 4 commits)
Fix kernel-doc syntax issues across xe header files: missing '@'
prefixes on member tags, stale/mismatched member tags, comment
syntax errors, and type/parameter name mismatches in references.
- Buffer object and DMA-buf resource leak fixes (Shuicheng Lin, 4 commits)
Fix resource leaks on error paths: DMA-buf attachment leak in
xe_gem_prime_import(), BO leak in xe_dma_buf_init_obj() on
allocation failure, and BO leaks in xe_bo_init_locked() on GGTT
flag validation and unaligned size validation failures.
- Include guard cleanup (Shuicheng Lin, 5 commits)
Fix and standardize include guards across xe header files: normalize
double-underscore guards to single, add missing leading/trailing
underscores, add missing _H suffixes, and add guards to previously
unprotected headers.
- VF CCS memory pool (Satyanarayana K V P, 2 commits)
Switch VF CCS read/write operations from the DRM sub-allocator to
DRM mm, fixing allocation failures in fence-disabled mode where
the sub-allocator's hole cursor assumption breaks. Also introduces
a general BO-backed memory pool with shadow support using drm_mm.
- i915/xe step definition unification (Jani Nikula, 3 commits)
Complete the migration to the shared intel_step header: switch xe
from its own xe_step enum to the shared intel_step naming and
definitions, and update i915 display code to include the common
step header directly.
- Xe3p GT tuning fixes (3 commits)
Three Xe3p GT tuning corrections: fix the register offset for
GAMSTLB_CTRL, stop applying the CCCHKNREG1 tuning from Xe3p onward
(no longer needed), and mark ROW_CHICKEN5 as a masked register.
- Forcewake cleanup in GT and GuC PC (Raag Jadav, 3 commits)
Drop a redundant forcewake reference in xe_gt, reorder forcewake
usage in xe_guc_pc_fini_hw() to avoid a redundant hold, and convert
xe_guc_pc_stop() to void since it can no longer fail.
- SVM garbage collector fix on close (Matthew Brost, 2 commits)
Disable the SVM garbage collector work item when an SVM is closed
to prevent use-after-free when the GC fires after the SVM is freed.
- Admin-only PF mode (Satyanarayana K V P, 2 commits)
Derive an "admin-only PF" mode flag from xe_device state instead of
using a local flag, and restrict device query responses when running
in admin-only PF mode to avoid exposing internal state.
- Enable hwmon energy attributes and accepted power limit for CRI (2 commits)
Enable energy consumption hwmon attributes for the CRI platform and
add support for reading the accepted (sustained) power limit via
hwmon.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/afNSeZJHC3X2m3-N@fedora
Add a generic V4L2 boolean control V4L2_CID_MPEG_VIDEO_BACKGROUND_DETECTION
that allows encoders to detect background regions in a frame and use fewer
bits or skip mode to encode them, potentially reducing bitrate for streams
with stationary scenes.
Signed-off-by: Jackson Lee <jackson.lee@chipsnmedia.com>
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
If time slice extensions have been disabled on the kernel command line,
then advertising them in RSEQ flags is wrong.
Adjust the conditionals to reflect reality, fixup the misleading comments
about the gap of these flags and the rseq::flags field.
Fixes: d6200245c7 ("rseq: Allow registering RSEQ with slice extension")
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://patch.msgid.link/20260428224427.437059375%40kernel.org
Cc: stable@vger.kernel.org
- mac80211: major rework of station bandwidth handling,
fixing issues with lower capability than AP
- general: cleanups for EMLSR spec issues (drafts differed)
- ath9k: GPIO interface improvements
- ath12k: replace dynamic memory allocation in WMI RX path
-----BEGIN PGP SIGNATURE-----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=cEhV
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-04-30' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Some new content already, notably:
- mac80211: major rework of station bandwidth handling,
fixing issues with lower capability than AP
- general: cleanups for EMLSR spec issues (drafts differed)
- ath9k: GPIO interface improvements
- ath12k: replace dynamic memory allocation in WMI RX path
* tag 'wireless-next-2026-04-30' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (39 commits)
wifi: brcmsmac: phy_lcn: Remove dead code in wlc_lcnphy_radio_2064_channel_tune_4313()
wifi: mac80211: always allow transmitting null-data on TXQs
wifi: mac80211: use kstrtobool_from_user() in debugfs callbacks
wifi: cfg80211: validate cipher suite for NAN Data keys
wifi: nl80211: check link is beaconing for color change
wifi: mac80211: clarify an 802.11 VHT spec reference
wifi: mac80211: fix per-station PHY capability bandwidth
wifi: mac80211: clarify per-STA bandwidth handling
wifi: nl80211: always validate AP operation/PHY regulatory
wifi: cfg80211: provide HT/VHT operation for AP beacon
wifi: nl80211: reject too short HT/VHT/HE/EHT capability/operation
wifi: cfg80211: move AP HT/VHT/... operation to beacon info
wifi: nl80211: reject beacons with bad HE operation
wifi: cfg80211: remove HE/SAE H2E required fields
wifi: mac80211: remove ieee80211_sta_cur_vht_bw()
wifi: mac80211: clean up ieee80211_sta_cap_rx_bw()
wifi: mac80211: clean up initial STA NSS/bandwidth handling
wifi: mac80211: clean up STA NSS handling
wifi: mac80211: simplify ieee80211_sta_rx_bw_to_chan_width()
wifi: nl80211: document channel opmode change channel width
...
====================
Link: https://patch.msgid.link/20260430120304.249081-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add pin-operstate enum and operstate_on_dpll_get callback to report
the actual hardware status of a pin with respect to its parent DPLL
device. Unlike pin-state (which reflects administrative intent set
by the user), operstate reflects what the hardware is actually doing.
Defined operational states:
- active: pin is qualified and actively used by the DPLL
- standby: pin is qualified but not actively used by the DPLL
- no-signal: pin does not have a valid signal
- qual-failed: pin signal failed qualification
The operstate is reported inside the pin-parent-device nested
attribute alongside the existing state and phase-offset attributes.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Petr Oros <poros@redhat.com>
Link: https://patch.msgid.link/20260428154907.2820654-2-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Incrementally consumed buffer rings are generally fully consumed, but
it's quite possible that the application has a minimum size it needs to
meet to avoid truncation. Currently that minimum limit is 1 byte, but
this should be a setting that is the hands of the application. For
recvmsg multishot, a prime use case for incrementally consumed buffers,
the application may get spurious -EFAULT returned at the end of an
incrementally consumed buffer, as less space is available than the
headers need.
Grab a u32 field in struct io_uring_buf_reg, which the application can
use to inform the kernel of the minimum size that should be available
in an incrementally consumed buffer. If less than that is available,
the current buffer is fully processed and the next one will be picked.
Cc: stable@vger.kernel.org
Fixes: ae98dbf43d ("io_uring/kbuf: add support for incremental buffer consumption")
Link: https://github.com/axboe/liburing/issues/1433
Signed-off-by: Martin Michaelis <code@mgjm.de>
[axboe: write commit message, change io_buffer_list member name]
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The opmode change notification is entirely unused by existing
userspace except for printing out the values. As such, there's
no need to keep it perfectly accurate, and the implementation
in mac80211 doesn't report it correctly today. Add a note in
the documentation that it may not differentiate 80+80 and 160.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.87d5b1ce688f.Ia9a0769d52dcfe56f7b0dff903ed14db3ef04920@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This modifier applies to the IIO_ROT channel type, and indicates a data
representation that specifies the {x, y, z} components of the normalized
quaternion vector.
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Old code like amateur radio and NFC have long been a burden
to core networking developers. syzbot loves to find bugs
in BKL-era code, and noobs try to fix them.
If we want to have a fighting chance of surviving the LLM-pocalypse
this code needs to find a dedicated owner or get deleted.
We've talked about these deletions multiple times in the past
and every time someone wanted the code to stay. It is never
very clear to me how many of those people actually use the code
vs are just nostalgic to see it go. Amateur radio did have
occasional users (or so I think) but most users switched
to user space implementations since its all super slow stuff.
Nobody stepped up to maintain the kernel code.
We were lucky enough to find someone who wants to help with NFC
so we're giving that a chance. Let's try to put the rest of
this code behind us.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=3vMU
-----END PGP SIGNATURE-----
Merge tag 'net-deletions' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking deletions from Jakub Kicinski:
"Delete some obsolete networking code
Old code like amateur radio and NFC have long been a burden to core
networking developers. syzbot loves to find bugs in BKL-era code, and
noobs try to fix them.
If we want to have a fighting chance of surviving the LLM-pocalypse
this code needs to find a dedicated owner or get deleted. We've talked
about these deletions multiple times in the past and every time
someone wanted the code to stay. It is never very clear to me how many
of those people actually use the code vs are just nostalgic to see it
go. Amateur radio did have occasional users (or so I think) but most
users switched to user space implementations since its all super slow
stuff. Nobody stepped up to maintain the kernel code.
We were lucky enough to find someone who wants to help with NFC so
we're giving that a chance. Let's try to put the rest of this code
behind us"
* tag 'net-deletions' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next:
drivers: net: 8390: wd80x3: Remove this driver
drivers: net: 8390: ultra: Remove this driver
drivers: net: 8390: AX88190: Remove this driver
drivers: net: fujitsu: fmvj18x: Remove this driver
drivers: net: smsc: smc91c92: Remove this driver
drivers: net: smsc: smc9194: Remove this driver
drivers: net: amd: nmclan: Remove this driver
drivers: net: amd: lance: Remove this driver
drivers: net: 3com: 3c589: Remove this driver
drivers: net: 3com: 3c574: Remove this driver
drivers: net: 3com: 3c515: Remove this driver
drivers: net: 3com: 3c509: Remove this driver
net: packetengines: remove obsolete yellowfin driver and vendor dir
net: packetengines: remove obsolete hamachi driver
net: remove unused ATM protocols and legacy ATM device drivers
net: remove ax25 and amateur radio (hamradio) subsystem
net: remove ISDN subsystem and Bluetooth CMTP
caif: remove CAIF NETWORK LAYER
Introduce a new 'clear-error-counter' drm_ras command to reset the counter
value for a specific error counter of a given node.
The command is a 'do' netlink request with 'node-id' and 'error-id'
as parameters with no response payload.
Usage:
$ sudo ynl --family drm_ras --do clear-error-counter --json \
'{"node-id":1, "error-id":1}'
None
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20260409073318.2909379-5-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Maxime Ripard <mripard@redhat.com>
Remove the amateur radio (AX.25, NET/ROM, ROSE) protocol implementation
and all associated hamradio device drivers from the kernel tree.
This set of protocols has long been a huge bug/syzbot magnet,
and since nobody stepped up to help us deal with the influx
of the AI-generated bug reports we need to move it out of tree
to protect our sanity.
The code is moved to an out-of-tree repo:
https://github.com/linux-netdev/mod-orphan
if it's cleaned up and reworked there we can accept it back.
Minimal stub headers are kept for include/net/ax25.h (AX25_P_IP,
AX25_ADDR_LEN, ax25_address) and include/net/rose.h (ROSE_ADDR_LEN)
so that the conditional integration code in arp.c and tun.c continues
to compile and work when the out-of-tree modules are loaded.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Carlos Bilbao <carlos.bilbao@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260421021824.1293976-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Remove the ISDN (mISDN, CAPI) subsystem and Bluetooth CMTP protocol
from the kernel tree.
ISDN is a pretty old technology and it's unclear whether anyone still
uses it. I went over the last few years of git history and all the
commits are either tree-wide conversions or syzbot/static analyzer
fixes.
When we discussed removal in the past IIRC there were some concerns
about ISDN still being used in parts of Germany. Unfortunately, the
code base is quite old, none of the current maintainers are familiar
with it and AI tools will have a field day finding bugs here.
Delete this code and preserve it in an out-of-tree repository
for any remaining users:
https://github.com/linux-netdev/mod-orphan
UAPI constants AF_ISDN/PF_ISDN and the SELinux isdn_socket class
are preserved for ABI stability, but the rest of uAPI is removed.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260421022108.1299678-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Remove CAIF (Communication CPU to Application CPU Interface), the
ST-Ericsson modem protocol. The subsystem has been orphaned since 2013.
The last meaningful changes from the maintainers were in March 2013:
a8c7687bf2 ("caif_virtio: Check that vringh_config is not null")
b2273be8d2 ("caif_virtio: Use vringh_notify_enable correctly")
0d2e1a2926 ("caif_virtio: Introduce caif over virtio")
Not-so-coincidentally, according to "the Internet" ST-Ericsson officially
shut down its modem joint venture in Aug 2013.
If anyone is using this code please yell!
In the 13 years since, the code has accumulated 200 non-merge commits,
of which 71 were cross-tree API changes, 21 carried Fixes: tags, and
the remaining ~110 were cleanups, doc conversions, treewide refactors,
and one partial removal (caif_hsi, ca75bcf0a8).
We are still getting fixes to this code, in the last 10 days there were
3 reports on security@ about CAIF that I have been CCed on.
UAPI constants (AF_CAIF, ARPHRD_CAIF, N_CAIF, VIRTIO_ID_CAIF) and the
SELinux classmap entry are intentionally kept for ABI stability.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260416182829.1440262-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmnobFATHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXhafB/wMvf8yu4FgapbSRIlPboeW/ONDyuHd
k0y1a0IFMQLspWfCxK8+snEcHT3g9xzG3ksqcnac0SPgzqxQ4dlK/c7Xr+5EBXuf
TEt/bHrt6KT5BUpb1k/XxcdoObCsvZd3vfqR020OsHijw1Ni9PrdqeZxk56/vFJs
nvgyKvsrAEyfALOH1Vgwg0gNWpqJBj1KcT3Kl1o4p5lwQzVpUREZii6RyvgXT/pu
mckN63FrEPOpDaJllHmCPcfFSzqNi+wFQcFxm35w9rDQsVdnMsRWoJbcXNYW5QGM
+KOZ1/tzw4Z3queW78hcxsH6sXiElLDsJgtDohBhxbVvUXy+xHrJCOm5
=4Ke3
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20260421' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V updates from Wei Liu:
- Fix cross-compilation for hv tools (Aditya Garg)
- Fix vmemmap_shift exceeding MAX_FOLIO_ORDER in mshv_vtl (Naman Jain)
- Limit channel interrupt scan to relid high water mark (Michael
Kelley)
- Export hv_vmbus_exists() and use it in pci-hyperv (Dexuan Cui)
- Fix cleanup and shutdown issues for MSHV (Jork Loeser)
- Introduce more tracing support for MSHV (Stanislav Kinsburskii)
* tag 'hyperv-next-signed-20260421' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Skip LP/VP creation on kexec
x86/hyperv: move stimer cleanup to hv_machine_shutdown()
Drivers: hv: vmbus: fix hyperv_cpuhp_online variable shadowing
mshv: Add tracepoint for GPA intercept handling
mshv_vtl: Fix vmemmap_shift exceeding MAX_FOLIO_ORDER
tools: hv: Fix cross-compilation
Drivers: hv: vmbus: Export hv_vmbus_exists() and use it in pci-hyperv
mshv: Introduce tracing support
Drivers: hv: vmbus: Limit channel interrupt scan to relid high water mark
Usual driver updates (ufs, lpfc, fnic, target, mpi3mr). The
substantive core changes are adding a 'serial' sysfs attribute and
getting sd to support > PAGE_SIZE sectors.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaeeTSRsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIXxbAEA+LYW6sZ4JHAKRAlU1kPxlPFP18eBjcHa
HqWm8/sllyoBAIBt6ldCACW8sP0bLCDTpLz21XZqJGHm7bvR8xkyca0Q
=oglt
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Usual driver updates (ufs, lpfc, fnic, target, mpi3mr).
The substantive core changes are adding a 'serial' sysfs attribute and
getting sd to support > PAGE_SIZE sectors"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (98 commits)
scsi: target: Don't validate ignored fields in PROUT PREEMPT
scsi: qla2xxx: Use nr_cpu_ids instead of NR_CPUS for qp_cpu_map allocation
scsi: ufs: core: Disable timestamp for Kioxia THGJFJT0E25BAIP
scsi: mpi3mr: Fix typo
scsi: sd: fix missing put_disk() when device_add(&disk_dev) fails
scsi: libsas: Delete unused to_dom_device() and to_dev_attr()
scsi: storvsc: Handle PERSISTENT_RESERVE_IN truncation for Hyper-V vFC
scsi: iscsi_tcp: Remove unneeded selections of CRYPTO and CRYPTO_MD5
scsi: lpfc: Update lpfc version to 15.0.0.0
scsi: lpfc: Add PCI ID support for LPe42100 series adapters
scsi: lpfc: Introduce 128G link speed selection and support
scsi: lpfc: Check ASIC_ID register to aid diagnostics during failed fw updates
scsi: lpfc: Update construction of SGL when XPSGL is enabled
scsi: lpfc: Remove deprecated PBDE feature
scsi: lpfc: Add REG_VFI mailbox cmd error handling
scsi: lpfc: Log MCQE contents for mbox commands with no context
scsi: lpfc: Select mailbox rq_create cmd version based on SLI4 if_type
scsi: lpfc: Break out of IRQ affinity assignment when mask reaches nr_cpu_ids
scsi: ufs: core: Make the header files self-contained
scsi: ufs: core: Remove an include directive from ufshcd-crypto.h
...
BTF maximum vlen is encoded using 16 bits with a maximum vlen
of 65535. This has sufficed for structs, function parameters
and enumerated type values. However, with upcoming BTF location
information - in particular information about inline sites -
this limit is surpassed. Use bits 16-23 - currently unused in
BTF info - to extend to 24 bits, giving a max vlen of (2^24 - 1),
or 16 million.
Also extend BTF kind encoding from 5 to 7 bits, giving a maximum
available number of kinds of 128. Since with the BTF location work
we use another 3 kinds, we are fast approaching the current limit
of 32.
Convert BTF_MAX_* values to enums to allow them to be encoded in
kernel BTF; this will allow us to detect if the running kernel
supports a 24-bit vlen or not. Add one for max _possible_
(not used) kind.
Fix up a few places in the kernel where a 16-bit vlen is assumed;
remove BTF_INFO_MASK as now all bits are used.
The vlen expansion was suggested by Andrii in [1]; the kind expansion
is tackled here too as it may be needed also to support new kinds
in BTF.
[1] https://lore.kernel.org/bpf/CAEf4BzZx=X6vGqcA8SPU6D+v6k+TR=ZewebXMuXtpmML058piw@mail.gmail.com/
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260417143023.1551481-2-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Usual collection of driver changes, more core infrastructure updates that
typical this cycle:
- Minor cleanups and kernel-doc fixes in bnxt_re, hns, rdmavt, efa, ocrdma,
erdma, rtrs, hfi1, ionic, and pvrdma
- New udata validation framework and driver updates
- Modernize CQ creation interface in mlx4 and mlx5, manage CQ umem in core
- Promote UMEM to a core component, split out DMA block iterator logic
- Introduce FRMR pools with aging, statistics, pinned handles, and netlink
control and use it in mlx5
- Add PCIe TLP emulation support in mlx5
- Extend umem to work with revocable pinned dmabuf's and use it in irdma
- More net namespace improvements for rxe
- GEN4 hardware support in irdma
- First steps to MW and UC support in mana_ib
- Support for CQ umem and doorbells in bnxt_re
- Drop opa_vnic driver from hfi1
- Fixes:
IB/core zero dmac neighbor resolution race
GID table memory free
rxe pad/ICRC validation and r_key async errors
mlx4 external umem for CQ
umem DMA attributes on unmap
mana_ib RX steering on RSS QP destroy
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaeJyjAAKCRCFwuHvBreF
YXWOAQDZz7buqUgw45ufFMcClAfnIYeAIb0dlD5vnltvbIkUFgEAmOabYPZk0PHY
NlmfFBmWmIYXwgMHfYPlN1xYN/+Fjww=
=dd92
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"The usual collection of driver changes, more core infrastructure
updates that typical this cycle:
- Minor cleanups and kernel-doc fixes in bnxt_re, hns, rdmavt, efa,
ocrdma, erdma, rtrs, hfi1, ionic, and pvrdma
- New udata validation framework and driver updates
- Modernize CQ creation interface in mlx4 and mlx5, manage CQ umem in
core
- Promote UMEM to a core component, split out DMA block iterator
logic
- Introduce FRMR pools with aging, statistics, pinned handles, and
netlink control and use it in mlx5
- Add PCIe TLP emulation support in mlx5
- Extend umem to work with revocable pinned dmabuf's and use it in
irdma
- More net namespace improvements for rxe
- GEN4 hardware support in irdma
- First steps to MW and UC support in mana_ib
- Support for CQ umem and doorbells in bnxt_re
- Drop opa_vnic driver from hfi1
Fixes:
- IB/core zero dmac neighbor resolution race
- GID table memory free
- rxe pad/ICRC validation and r_key async errors
- mlx4 external umem for CQ
- umem DMA attributes on unmap
- mana_ib RX steering on RSS QP destroy"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (116 commits)
RDMA/core: Fix user CQ creation for drivers without create_cq
RDMA/ionic: bound node_desc sysfs read with %.64s
IB/core: Fix zero dmac race in neighbor resolution
RDMA/mana_ib: Support memory windows
RDMA/rxe: Validate pad and ICRC before payload_size() in rxe_rcv
RDMA/core: Prefer NLA_NUL_STRING
RDMA/core: Fix memory free for GID table
RDMA/hns: Remove the duplicate calls to ib_copy_validate_udata_in()
RDMA: Remove redundant = {} for udata req structs
RDMA/irdma: Add missing comp_mask check in alloc_ucontext
RDMA/hns: Add missing comp_mask check in create_qp
RDMA/mlx5: Pull comp_mask validation into ib_copy_validate_udata_in_cm()
RDMA: Use ib_copy_validate_udata_in_cm() for zero comp_mask
RDMA/hns: Use ib_copy_validate_udata_in()
RDMA/mlx4: Use ib_copy_validate_udata_in() for QP
RDMA/mlx4: Use ib_copy_validate_udata_in()
RDMA/mlx5: Use ib_copy_validate_udata_in() for MW
RDMA/mlx5: Use ib_copy_validate_udata_in() for SRQ
RDMA/pvrdma: Use ib_copy_validate_udata_in() for srq
RDMA: Use ib_copy_validate_udata_in() for implicit full structs
...
Benjamin Coddington contributed filehandle signing to defend against
filehandle-guessing attacks. The server now appends a SipHash-2-4
MAC to each filehandle when the new "sign_fh" export option is
enabled. NFSD then verifies filehandles received from clients
against the expected MAC; mismatches return NFS error STALE.
Chuck Lever converted the entire NLMv4 server-side XDR layer from
hand-written C to xdrgen-generated code, spanning roughly thirty
patches. XDR functions are generally boilerplate code and are easy
to get wrong. The goals of this conversion are improved memory
safety, lower maintenance burden, and groundwork for eventual Rust
code generation for these functions.
Dai Ngo improved pNFS block/SCSI layout robustness with two related
changes. SCSI persistent reservation fencing is now tracked per
client and per device via an xarray, to avoid both redundant preempt
operations on devices already fenced and a potential NFSD deadlock
when all nfsd threads are waiting for a layout return.
The remaining patches deliver scalability and infrastructure
improvements. Sincere thanks to all contributors, reviewers,
testers, and bug reporters who participated in the v7.1 NFSD
development cycle.
-----BEGIN PGP SIGNATURE-----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=iFl6
-----END PGP SIGNATURE-----
Merge tag 'nfsd-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
- filehandle signing to defend against filehandle-guessing attacks
(Benjamin Coddington)
The server now appends a SipHash-2-4 MAC to each filehandle when
the new "sign_fh" export option is enabled. NFSD then verifies
filehandles received from clients against the expected MAC;
mismatches return NFS error STALE
- convert the entire NLMv4 server-side XDR layer from hand-written C to
xdrgen-generated code, spanning roughly thirty patches (Chuck Lever)
XDR functions are generally boilerplate code and are easy to get
wrong. The goals of this conversion are improved memory safety, lower
maintenance burden, and groundwork for eventual Rust code generation
for these functions.
- improve pNFS block/SCSI layout robustness with two related changes
(Dai Ngo)
SCSI persistent reservation fencing is now tracked per client and
per device via an xarray, to avoid both redundant preempt operations
on devices already fenced and a potential NFSD deadlock when all nfsd
threads are waiting for a layout return.
- scalability and infrastructure improvements
Sincere thanks to all contributors, reviewers, testers, and bug
reporters who participated in the v7.1 NFSD development cycle.
* tag 'nfsd-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (83 commits)
NFSD: Docs: clean up pnfs server timeout docs
nfsd: fix comment typo in nfsxdr
nfsd: fix comment typo in nfs3xdr
NFSD: convert callback RPC program to per-net namespace
NFSD: use per-operation statidx for callback procedures
svcrdma: Use contiguous pages for RDMA Read sink buffers
SUNRPC: Add svc_rqst_page_release() helper
SUNRPC: xdr.h: fix all kernel-doc warnings
svcrdma: Factor out WR chain linking into helper
svcrdma: Add Write chunk WRs to the RPC's Send WR chain
svcrdma: Clean up use of rdma->sc_pd->device
svcrdma: Clean up use of rdma->sc_pd->device in Receive paths
svcrdma: Add fair queuing for Send Queue access
SUNRPC: Optimize rq_respages allocation in svc_alloc_arg
SUNRPC: Track consumed rq_pages entries
svcrdma: preserve rq_next_page in svc_rdma_save_io_pages
SUNRPC: Handle NULL entries in svc_rqst_release_pages
SUNRPC: Allocate a separate Reply page array
SUNRPC: Tighten bounds checking in svc_rqst_replace_page
NFSD: Sign filehandles
...
Here is the big set of USB and Thunderbolt changes for 7.1-rc1.
Lots of little things in here, nothing major, just constant
improvements, updates, and new features. Highlights are:
- new USB power supply driver support (will cause merge conflicts in
drivers/power/supply/Makefile, but it's a simple fix) These changes
did touch outside of drivers/usb/ but got acks from the relevant
mantainers for them.
- dts file updates and conversions
- string function conversions into "safer" ones
- new device quirks
- xhci driver updates
- usb gadget driver minor fixes
- typec driver additions and updates
- small number of thunderbolt driver changes
- dwc3 driver updates and additions of new hardware support
- other minor driver updates
All of these have been in the linux-next tree for a while with no
reported issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaeSx6g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynqjQCgqhbj0Pg2DiL+hZ4xEVlsKD8MJsMAn0vbdsR5
UiYztWABA245P1hO9i+K
=/fxh
-----END PGP SIGNATURE-----
Merge tag 'usb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 7.1-rc1.
Lots of little things in here, nothing major, just constant
improvements, updates, and new features. Highlights are:
- new USB power supply driver support.
These changes did touch outside of drivers/usb/ but got acks from
the relevant mantainers for them.
- dts file updates and conversions
- string function conversions into "safer" ones
- new device quirks
- xhci driver updates
- usb gadget driver minor fixes
- typec driver additions and updates
- small number of thunderbolt driver changes
- dwc3 driver updates and additions of new hardware support
- other minor driver updates
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'usb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (176 commits)
usb: dwc3: starfive: Add JHB100 USB 2.0 DRD controller
dt-bindings: usb: dwc3: add support for StarFive JHB100
dt-bindings: usb: atmel,at91sam9rl-udc: convert to DT schema
dt-bindings: usb: atmel,at91rm9200-udc: convert to DT schema
dt-bindings: usb: generic-ehci: fix schema structure and add at91sam9g45 constraints
dt-bindings: usb: generic-ohci: add AT91RM9200 OHCI binding support
arm: dts: at91: remove unused #address-cells/#size-cells from sam9x60 udc node
drivers/usb/host: Fix spelling error 'seperate' -> 'separate'
usbip: tools: add hint when no exported devices are found
USB: serial: iuu_phoenix: fix iuutool author name
usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb()
usb: gadget: f_phonet: fix skb frags[] overflow in pn_rx_complete()
usb: gadget: f_hid: Add missing error code
usb: typec: cros_ec_ucsi: Load driver from OF and ACPI definitions
dt-bindings: chrome: Add cros-ec-ucsi compatibility to typec binding
USB: of: Simplify with scoped for each OF child loop
usbip: validate number_of_packets in usbip_pack_ret_submit()
usb: gadget: renesas_usb3: validate endpoint index in standard request handlers
usb: core: config: reverse the size check of the SSP isoc endpoint descriptor
usb: typec: ucsi: Set usb mode on partner change
...
Here is the set of tty and serial driver changes for 7.1-rc1.
Not much here this cycle, biggest thing is the removal of an old driver
that never got any actual hardware support (esp32), and the second try
to moving the tty ports to their own workqueues (first try was in
7.0-rc1 but was reverted due to problems.)
Otherwise it's just a small set of driver updates and some vt modifier
key enhancements.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaeTdzg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymr3gCeKwRtlyy5LOFs/vikB47gf/aBb1MAoIv4JBDo
xWvKMVFvMD7XfsJkPHyR
=l37E
-----END PGP SIGNATURE-----
Merge tag 'tty-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the set of tty and serial driver changes for 7.1-rc1.
Not much here this cycle, biggest thing is the removal of an old
driver that never got any actual hardware support (esp32), and the
second try to moving the tty ports to their own workqueues (first try
was in 7.0-rc1 but was reverted due to problems)
Otherwise it's just a small set of driver updates and some vt modifier
key enhancements.
All have been in linux-next for a while with no reported issues"
* tag 'tty-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (35 commits)
tty: serial: ip22zilog: Fix section mispatch warning
hvc/xen: Check console connection flag
serial: sh-sci: Add support for RZ/G3L RSCI
dt-bindings: serial: renesas,rsci: Document RZ/G3L SoC
tty: atmel_serial: update outdated reference to atmel_tasklet_func()
serial: xilinx_uartps: Drop unused include
serial: qcom-geni: drop stray newline format specifier
serial: 8250: loongson: Enable building on MIPS Loongson64
dt-bindings: serial: 8250: Add Loongson 3A4000 uart compatible
serial: 8250_fintek: Add support for F81214E
tty: tty_port: add workqueue to flip TTY buffer
vt: support ITU-T T.416 color subparameters
serial: qcom-geni: Fix RTS behavior with flow control
tty: serial: imx: keep dma request disabled before dma transfer setup
tty: serial: 8250: Add SystemBase Multi I/O cards
serial: pic32_uart: allow driver to be compiled on all architectures with COMPILE_TEST
serial: tegra: remove Kconfig dependency on APB DMA controller
dt-bindings: serial: amlogic,meson-uart: Add compatible string for A9
dt-bindings: serial: atmel,at91-usart: add microchip,lan9691-usart
serial: auart: check clk_enable() return in console write
...
- Write support:
Implemented full write support based on the classic read-only NTFS
driver. Added delayed allocation to improve write performance through
multi-cluster allocation and reduced fragmentation of the cluster
bitmap.
- iomap conversion:
Switched buffered IO (reads/writes), direct IO, file extent mapping,
readpages, and writepages to use iomap.
- Remove buffer_head:
Completely removed buffer_head usage by converting to folios.
As a result, the dependency on CONFIG_BUFFER_HEAD has been removed
from Kconfig.
- Stability improvements:
The new ntfs driver passes 326 xfstests, compared to 273 for ntfs3.
All tests passed by ntfs3 are a complete subset of the tests passed
by this implementation. Added support for fallocate, idmapped mounts,
permissions, and more.
- xfstests Results report:
Total tests run: 787
Passed : 326
Failed : 38
Skipped : 423
Failed tests breakdown:
- 34 tests require metadata journaling
- 4 other tests:
094: No unwritten extent concept in NTFS on-disk format
563: cgroup v2 aware writeback accounting not supported
631: RENAME_WHITEOUT support required
787: NFS delegation test
-----BEGIN PGP SIGNATURE-----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=x5UX
-----END PGP SIGNATURE-----
Merge tag 'ntfs-for-7.1-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/ntfs
Pull ntfs resurrection from Namjae Jeon:
"Ever since Kari Argillander’s 2022 report [1] regarding the state of
the ntfs3 driver, I have spent the last 4 years working to provide
full write support and current trends (iomap, no buffer head, folio),
enhanced performance, stable maintenance, utility support including
fsck for NTFS in Linux.
This new implementation is built upon the clean foundation of the
original read-only NTFS driver, adding:
- Write support:
Implemented full write support based on the classic read-only NTFS
driver. Added delayed allocation to improve write performance
through multi-cluster allocation and reduced fragmentation of the
cluster bitmap.
- iomap conversion:
Switched buffered IO (reads/writes), direct IO, file extent
mapping, readpages, and writepages to use iomap.
- Remove buffer_head:
Completely removed buffer_head usage by converting to folios. As a
result, the dependency on CONFIG_BUFFER_HEAD has been removed from
Kconfig.
- Stability improvements:
The new ntfs driver passes 326 xfstests, compared to 273 for ntfs3.
All tests passed by ntfs3 are a complete subset of the tests passed
by this implementation. Added support for fallocate, idmapped
mounts, permissions, and more.
xfstests Results report:
Total tests run: 787
Passed : 326
Failed : 38
Skipped : 423
Failed tests breakdown:
- 34 tests require metadata journaling
- 4 other tests:
094: No unwritten extent concept in NTFS on-disk format
563: cgroup v2 aware writeback accounting not supported
631: RENAME_WHITEOUT support required
787: NFS delegation test"
Link: https://lore.kernel.org/all/da20d32b-5185-f40b-48b8-2986922d8b25@stargateuniverse.net/ [1]
[ Let's see if this undead filesystem ends up being of the "Easter
miracle" kind, or the "Nosferatu of filesystems" kind... ]
* tag 'ntfs-for-7.1-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/ntfs: (46 commits)
ntfs: remove redundant out-of-bound checks
ntfs: add bound checking to ntfs_external_attr_find
ntfs: add bound checking to ntfs_attr_find
ntfs: fix ignoring unreachable code warnings
ntfs: fix inconsistent indenting warnings
ntfs: fix variable dereferenced before check warnings
ntfs: prefer IS_ERR_OR_NULL() over manual NULL check
ntfs: harden ntfs_listxattr against EA entries
ntfs: harden ntfs_ea_lookup against malformed EA entries
ntfs: check $EA query-length in ntfs_ea_get
ntfs: validate WSL EA payload sizes
ntfs: fix WSL ea restore condition
ntfs: add missing newlines to pr_err() messages
ntfs: fix pointer/integer casting warnings
ntfs: use ->mft_no instead of ->i_ino in prints
ntfs: change mft_no type to u64
ntfs: select FS_IOMAP in Kconfig
ntfs: add MODULE_ALIAS_FS
ntfs: reduce stack usage in ntfs_write_mft_block()
ntfs: fix sysctl table registration and path
...
- added support for batched cache sync, what improves performance of
dma_map/unmap_sg() operations on ARM64 architecture (Barry Song)
- introduced DMA_ATTR_CC_SHARED attribute for explicitly shared memory
used in confidential computing (Jiri Pirko)
- refactored spaghetti-like code in drivers/of/of_reserved_mem.c and its
clients (Marek Szyprowski, shared branch with device-tree updates to
avoid merge conflicts)
- prepared Contiguous Memory Allocator related code for making dma-buf
drivers modularized (Maxime Ripard)
- added support for benchmarking dma_map_sg() calls to tools/dma utility
(Qinxin Xia)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSrngzkoBtlA8uaaJ+Jp1EFxbsSRAUCaeCbdQAKCRCJp1EFxbsS
RHbWAQCt70dzrU0lu0omTR1HdDP4GTYfuM6nZR91e8/itGN1+QD/XH4I/0wuybzk
v5uxbIC6lR3abQRc3YNRXfi+i5j26A4=
=Oee2
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-7.1-2026-04-16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping updates from Marek Szyprowski:
- added support for batched cache sync, what improves performance of
dma_map/unmap_sg() operations on ARM64 architecture (Barry Song)
- introduced DMA_ATTR_CC_SHARED attribute for explicitly shared memory
used in confidential computing (Jiri Pirko)
- refactored spaghetti-like code in drivers/of/of_reserved_mem.c and
its clients (Marek Szyprowski, shared branch with device-tree updates
to avoid merge conflicts)
- prepared Contiguous Memory Allocator related code for making dma-buf
drivers modularized (Maxime Ripard)
- added support for benchmarking dma_map_sg() calls to tools/dma
utility (Qinxin Xia)
* tag 'dma-mapping-7.1-2026-04-16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux: (24 commits)
dma-buf: heaps: system: document system_cc_shared heap
dma-buf: heaps: system: add system_cc_shared heap for explicitly shared memory
dma-mapping: introduce DMA_ATTR_CC_SHARED for shared memory
mm: cma: Export cma_alloc(), cma_release() and cma_get_name()
dma: contiguous: Export dev_get_cma_area()
dma: contiguous: Make dma_contiguous_default_area static
dma: contiguous: Make dev_get_cma_area() a proper function
dma: contiguous: Turn heap registration logic around
of: reserved_mem: rework fdt_init_reserved_mem_node()
of: reserved_mem: clarify fdt_scan_reserved_mem*() functions
of: reserved_mem: rearrange code a bit
of: reserved_mem: replace CMA quirks by generic methods
of: reserved_mem: switch to ops based OF_DECLARE()
of: reserved_mem: use -ENODEV instead of -ENOENT
of: reserved_mem: remove fdt node from the structure
dma-mapping: fix false kernel-doc comment marker
dma-mapping: Support batch mode for dma_direct_{map,unmap}_sg
dma-mapping: Separate DMA sync issuing and completion waiting
arm64: Provide dcache_inval_poc_nosync helper
arm64: Provide dcache_clean_poc_nosync helper
...
- Fix printf format warning for bprintf
sunrpc uses a trace_printk() that triggers a printf warning during the
compile. Move the __printf() attribute around for when debugging is not
enabled the warning will go away.
- Remove redundant check for EVENT_FILE_FL_FREED in event_filter_write()
The FREED flag is checked in the call to event_file_file() and then
checked again right afterward, which is unneeded.
- Clean up event_file_file() and event_file_data() helpers
These helper functions played a different role in the past, but now with
eventfs, the READ_ONCE() isn't needed. Simplify the code a bit and also
add a warning to event_file_data() if the file or its data is not present.
- Remove updating file->private_data in tracing open
All access to the file private data is handled by the helper functions,
which do not use file->private_data. Stop updating it on open.
- Show ENUM names in function arguments via BTF in function tracing
When showing the function arguments when func-args option is set for
function tracing, if one of the arguments is found to be an enum, show the
name of the enum instead of its number.
- Add new trace_call__##name() API for tracepoints
Tracepoints are enabled via static_branch() blocks, where when not
enabled, there's only a nop that is in the code where the execution will
just skip over it. When tracing is enabled, the nop is converted to a
direct jump to the tracepoint code. Sometimes more calculations are
required to be performed to update the parameters of the tracepoint. In
this case, trace_##name##_enabled() is called which is a static_branch()
that gets enabled only when the tracepoint is enabled. This allows the
extra calculations to also be skipped by the nop:
if (trace_foo_enabled()) {
x = bar();
trace_foo(x);
}
Where the x=bar() is only performed when foo is enabled. The problem with
this approach is that there's now two static_branch() calls. One for
checking if the tracepoint is enabled, and then again to know if the
tracepoint should be called. The second one is redundant.
Introduce trace_call__foo() that will call the foo() tracepoint directly
without doing a static_branch():
if (trace_foo_enabled()) {
x = bar();
trace_call__foo();
}
- Update various locations to use the new trace_call__##name() API
- Move snapshot code out of trace.c
Cleaning up trace.c to not be a "dump all", move the snapshot code out of
it and into a new trace_snapshot.c file.
- Clean up some "%*.s" to "%*s"
- Allow boot kernel command line options to be called multiple times
Have options like:
ftrace_filter=foo ftrace_filter=bar ftrace_filter=zoo
Equal to:
ftrace_filter=foo,bar,zoo
- Fix ipi_raise event CPU field to be a CPU field
The ipi_raise target_cpus field is defined as a __bitmask(). There is now a
__cpumask() field definition. Update the field to use that.
- Have hist_field_name() use a snprintf() and not a series of strcat()
It's safer to use snprintf() that a series of strcat().
- Fix tracepoint regfunc balancing
A tracepoint can define a "reg" and "unreg" function that gets called
before the tracepoint is enabled, and after it is disabled respectively.
But on error, after the "reg" func is called and the tracepoint is not
enabled, the "unreg" function is not called to tear down what the "reg"
function performed.
- Fix output that shows what histograms are enabled
Event variables are displayed incorrectly in the histogram output.
Instead of "sched.sched_wakeup.$var", it is showing
"$sched.sched_wakeup.var" where the '$' is in the incorrect location.
- Some other simple cleanups.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaeCpvxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qt2WAP44m85BbAjBqJe4WR103eOXV+bREBta
dRoReKJOMe519gEAp0rK/HoCvHgHhIGe3gaGdIsNhnaxoFyNWMG/wokoLAY=
=Hg6+
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Fix printf format warning for bprintf
sunrpc uses a trace_printk() that triggers a printf warning during
the compile. Move the __printf() attribute around for when debugging
is not enabled the warning will go away
- Remove redundant check for EVENT_FILE_FL_FREED in
event_filter_write()
The FREED flag is checked in the call to event_file_file() and then
checked again right afterward, which is unneeded
- Clean up event_file_file() and event_file_data() helpers
These helper functions played a different role in the past, but now
with eventfs, the READ_ONCE() isn't needed. Simplify the code a bit
and also add a warning to event_file_data() if the file or its data
is not present
- Remove updating file->private_data in tracing open
All access to the file private data is handled by the helper
functions, which do not use file->private_data. Stop updating it on
open
- Show ENUM names in function arguments via BTF in function tracing
When showing the function arguments when func-args option is set for
function tracing, if one of the arguments is found to be an enum,
show the name of the enum instead of its number
- Add new trace_call__##name() API for tracepoints
Tracepoints are enabled via static_branch() blocks, where when not
enabled, there's only a nop that is in the code where the execution
will just skip over it. When tracing is enabled, the nop is converted
to a direct jump to the tracepoint code. Sometimes more calculations
are required to be performed to update the parameters of the
tracepoint. In this case, trace_##name##_enabled() is called which is
a static_branch() that gets enabled only when the tracepoint is
enabled. This allows the extra calculations to also be skipped by the
nop:
if (trace_foo_enabled()) {
x = bar();
trace_foo(x);
}
Where the x=bar() is only performed when foo is enabled. The problem
with this approach is that there's now two static_branch() calls. One
for checking if the tracepoint is enabled, and then again to know if
the tracepoint should be called. The second one is redundant
Introduce trace_call__foo() that will call the foo() tracepoint
directly without doing a static_branch():
if (trace_foo_enabled()) {
x = bar();
trace_call__foo();
}
- Update various locations to use the new trace_call__##name() API
- Move snapshot code out of trace.c
Cleaning up trace.c to not be a "dump all", move the snapshot code
out of it and into a new trace_snapshot.c file
- Clean up some "%*.s" to "%*s"
- Allow boot kernel command line options to be called multiple times
Have options like:
ftrace_filter=foo ftrace_filter=bar ftrace_filter=zoo
Equal to:
ftrace_filter=foo,bar,zoo
- Fix ipi_raise event CPU field to be a CPU field
The ipi_raise target_cpus field is defined as a __bitmask(). There is
now a __cpumask() field definition. Update the field to use that
- Have hist_field_name() use a snprintf() and not a series of strcat()
It's safer to use snprintf() that a series of strcat()
- Fix tracepoint regfunc balancing
A tracepoint can define a "reg" and "unreg" function that gets called
before the tracepoint is enabled, and after it is disabled
respectively. But on error, after the "reg" func is called and the
tracepoint is not enabled, the "unreg" function is not called to tear
down what the "reg" function performed
- Fix output that shows what histograms are enabled
Event variables are displayed incorrectly in the histogram output
Instead of "sched.sched_wakeup.$var", it is showing
"$sched.sched_wakeup.var" where the '$' is in the incorrect location
- Some other simple cleanups
* tag 'trace-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (24 commits)
selftests/ftrace: Add test case for fully-qualified variable references
tracing: Fix fully-qualified variable reference printing in histograms
tracepoint: balance regfunc() on func_add() failure in tracepoint_add_func()
tracing: Rebuild full_name on each hist_field_name() call
tracing: Report ipi_raise target CPUs as cpumask
tracing: Remove duplicate latency_fsnotify() stub
tracing: Preserve repeated trace_trigger boot parameters
tracing: Append repeated boot-time tracing parameters
tracing: Remove spurious default precision from show_event_trigger/filter formats
cpufreq: Use trace_call__##name() at guarded tracepoint call sites
tracing: Remove tracing_alloc_snapshot() when snapshot isn't defined
tracing: Move snapshot code out of trace.c and into trace_snapshot.c
mm: damon: Use trace_call__##name() at guarded tracepoint call sites
btrfs: Use trace_call__##name() at guarded tracepoint call sites
spi: Use trace_call__##name() at guarded tracepoint call sites
i2c: Use trace_call__##name() at guarded tracepoint call sites
kernel: Use trace_call__##name() at guarded tracepoint call sites
tracepoint: Add trace_call__##name() API
tracing: trace_mmap.h: fix a kernel-doc warning
tracing: Pretty-print enum parameters in function arguments
...
- Add support for tracing in the standalone EL2 hypervisor code, which
should help both debugging and performance analysis. This uses the
new infrastructure for 'remote' trace buffers that can be exposed
by non-kernel entities such as firmware, and which came through the
tracing tree.
- Add support for GICv5 Per Processor Interrupts (PPIs), as the starting
point for supporting the new GIC architecture in KVM.
- Finally add support for pKVM protected guests, where pages are unmapped
from the host as they are faulted into the guest and can be shared back
from the guest using pKVM hypercalls. Protected guests are created
using a new machine type identifier. As the elusive guestmem has not
yet delivered on its promises, anonymous memory is also supported.
This is only a first step towards full isolation from the host; for
example, the CPU register state and DMA accesses are not yet isolated.
Because this does not really yet bring fully what it promises, it is
hidden behind CONFIG_ARM_PKVM_GUEST + 'kvm-arm.mode=protected', and
also triggers TAINT_USER when a VM is created. Caveat emptor.
- Rework the dreaded user_mem_abort() function to make it more
maintainable, reducing the amount of state being exposed to the
various helpers and rendering a substantial amount of state immutable.
- Expand the Stage-2 page table dumper to support NV shadow page tables
on a per-VM basis.
- Tidy up the pKVM PSCI proxy code to be slightly less hard to follow.
- Fix both SPE and TRBE in non-VHE configurations so that they do not
generate spurious, out of context table walks that ultimately lead
to very bad HW lockups.
- A small set of patches fixing the Stage-2 MMU freeing in error cases.
- Tighten-up accepted SMC immediate value to be only #0 for host
SMCCC calls.
- The usual cleanups and other selftest churn.
LoongArch:
- Use CSR_CRMD_PLV for kvm_arch_vcpu_in_kernel().
- Add DMSINTC irqchip in kernel support.
RISC-V:
- Fix steal time shared memory alignment checks
- Fix vector context allocation leak
- Fix array out-of-bounds in pmu_ctr_read() and pmu_fw_ctr_read_hi()
- Fix double-free of sdata in kvm_pmu_clear_snapshot_area()
- Fix integer overflow in kvm_pmu_validate_counter_mask()
- Fix shift-out-of-bounds in make_xfence_request()
- Fix lost write protection on huge pages during dirty logging
- Split huge pages during fault handling for dirty logging
- Skip CSR restore if VCPU is reloaded on the same core
- Implement kvm_arch_has_default_irqchip() for KVM selftests
- Factored-out ISA checks into separate sources
- Added hideleg to struct kvm_vcpu_config
- Factored-out VCPU config into separate sources
- Support configuration of per-VM HGATP mode from KVM user space
s390:
- Support for ESA (31-bit) guests inside nested hypervisors.
- Remove restriction on memslot alignment, which is not needed anymore with
the new gmap code.
- Fix LPSW/E to update the bear (which of course is the breaking event
address register).
x86:
- Shut up various UBSAN warnings on reading module parameter before they
were initialized.
- Don't zero-allocate page tables that are used for splitting hugepages in
the TDP MMU, as KVM is guaranteed to set all SPTEs in the page table and
thus write all bytes.
- As an optimization, bail early when trying to unsync 4KiB mappings if the
target gfn can just be mapped with a 2MiB hugepage.
x86 generic:
- Copy single-chunk MMIO write values into struct kvm_vcpu (more precisely
struct kvm_mmio_fragment) to fix use-after-free stack bugs where KVM
would dereference stack pointer after an exit to userspace.
- Clean up and comment the emulated MMIO code to try to make it easier to
maintain (not necessarily "easy", but "easier").
- Move VMXON+VMXOFF and EFER.SVME toggling out of KVM (not *all* of VMX
and SVM enabling) as it is needed for trusted I/O.
- Advertise support for AVX512 Bit Matrix Multiply (BMM) instructions
- Immediately fail the build if a required #define is missing in one of
KVM's headers that is included multiple times.
- Reject SET_GUEST_DEBUG with -EBUSY if there's an already injected
exception, mostly to prevent syzkaller from abusing the uAPI to
trigger WARNs, but also because it can help prevent userspace from
unintentionally crashing the VM.
- Exempt SMM from CPUID faulting on Intel, as per the spec.
- Misc hardening and cleanup changes.
x86 (AMD):
- Fix and optimize IRQ window inhibit handling for AVIC; make it per-vCPU
so that KVM doesn't prematurely re-enable AVIC if multiple
vCPUs have to-be-injected IRQs.
- Clean up and optimize the OSVW handling, avoiding a bug in which KVM would
overwrite state when enabling virtualization on multiple CPUs in parallel.
This should not be a problem because OSVW should usually be the same for
all CPUs.
- Drop a WARN in KVM_MEMORY_ENCRYPT_REG_REGION where KVM complains about a
"too large" size based purely on user input.
- Clean up and harden the pinning code for KVM_MEMORY_ENCRYPT_REG_REGION.
- Disallow synchronizing a VMSA of an already-launched/encrypted vCPU, as
doing so for an SNP guest will crash the host due to an RMP violation
page fault.
- Overhaul KVM's APIs for detecting SEV+ guests so that VM-scoped queries
are required to hold kvm->lock, and enforce it by lockdep. Fix various
bugs where sev_guest() was not ensured to be stable for the whole
duration of a function or ioctl.
- Convert a pile of kvm->lock SEV code to guard().
- Play nicer with userspace that does not enable KVM_CAP_EXCEPTION_PAYLOAD,
for which KVM needs to set CR2 and DR6 as a response to ioctls such as
KVM_GET_VCPU_EVENTS (even if the payload would end up in EXITINFO2
rather than CR2, for example). Only set CR2 and DR6 when consumption of
the payload is imminent, but on the other hand force delivery of the
payload in all paths where userspace retrieves CR2 or DR6.
- Use vcpu->arch.cr2 when updating vmcb12's CR2 on nested #VMEXIT instead
of vmcb02->save.cr2. The value is out of sync after a save/restore
or after a #PF is injected into L2.
- Fix a class of nSVM bugs where some fields written by the CPU are not
synchronized from vmcb02 to cached vmcb12 after VMRUN, and so are not
up-to-date when saved by KVM_GET_NESTED_STATE.
- Fix a class of bugs where the ordering between KVM_SET_NESTED_STATE and
KVM_SET_{S}REGS could cause vmcb02 to be incorrectly initialized after
save+restore.
- Add a variety of missing nSVM consistency checks.
- Fix several bugs where KVM failed to correctly update VMCB fields on
nested #VMEXIT.
- Fix several bugs where KVM failed to correctly synthesize #UD or #GP for
SVM-related instructions.
- Add support for save+restore of virtualized LBRs (on SVM).
- Refactor various helpers and macros to improve clarity and (hopefully)
make the code easier to maintain.
- Aggressively sanitize fields when copying from vmcb12, to guard against
unintentionally allowing L1 to utilize yet-to-be-defined features.
- Fix several bugs where KVM botched rAX legality checks when emulating SVM
instructions. There are remaining issues in that KVM doesn't handle size
prefix overrides for 64-bit guests.
- Fail emulation of VMRUN/VMLOAD/VMSAVE if mapping vmcb12 fails instead of
somewhat arbitrarily synthesizing #GP (i.e. don't double down on AMD's
architectural but sketchy behavior of generating #GP for "unsupported"
addresses).
- Cache all used vmcb12 fields to further harden against TOCTOU bugs.
x86 (Intel):
- Drop obsolete branch hint prefixes from the VMX instruction macros.
- Use ASM_INPUT_RM() in __vmcs_writel() to coerce clang into using a
register input when appropriate.
- Code cleanups.
guest_memfd:
- Don't mark guest_memfd folios as accessed, as guest_memfd doesn't support
reclaim, the memory is unevictable, and there is no storage to write
back to.
LoongArch selftests:
- Add KVM PMU test cases
s390 selftests:
- Enable more memory selftests.
x86 selftests:
- Add support for Hygon CPUs in KVM selftests.
- Fix a bug in the MSR test where it would get false failures on AMD/Hygon
CPUs with exactly one of RDPID or RDTSCP.
- Add an MADV_COLLAPSE testcase for guest_memfd as a regression test for a
bug where the kernel would attempt to collapse guest_memfd folios against
KVM's will.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmnftRQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPAzwf+NKO4Ktv+7A22ImN0SBl0nlUuulsz
vTcw3+hxdRoIw83GdNS+hG5js0wrpMDnbv3t4+VliDNBSSxrBzcSWX2wpilW0Xtw
qGo1MWhs2lKPy1NlaRVOwPS6j7uF3AR0TQ1iQLGMedQuCU9WpiKJxyhNXJdbLrt3
8EgFzsvtEsv+jKNRUNDf9+d0j4gZsFyIe+Brhianbw+u3/UCiUClLCdsKPc4+5ZX
08otYXytacGNIf/5Ev1vT4pHkHL0yqKXAtX7LEtaS3+0KrPuLjV4slemivzE9vf5
Evafm5AhA4wpaNMb1ZerhY3T94lsMaJpWxotjR//0Q7C9B59pCQnXCm8mg==
=CcE0
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Arm:
- Add support for tracing in the standalone EL2 hypervisor code,
which should help both debugging and performance analysis. This
uses the new infrastructure for 'remote' trace buffers that can be
exposed by non-kernel entities such as firmware, and which came
through the tracing tree
- Add support for GICv5 Per Processor Interrupts (PPIs), as the
starting point for supporting the new GIC architecture in KVM
- Finally add support for pKVM protected guests, where pages are
unmapped from the host as they are faulted into the guest and can
be shared back from the guest using pKVM hypercalls. Protected
guests are created using a new machine type identifier. As the
elusive guestmem has not yet delivered on its promises, anonymous
memory is also supported
This is only a first step towards full isolation from the host; for
example, the CPU register state and DMA accesses are not yet
isolated. Because this does not really yet bring fully what it
promises, it is hidden behind CONFIG_ARM_PKVM_GUEST +
'kvm-arm.mode=protected', and also triggers TAINT_USER when a VM is
created. Caveat emptor
- Rework the dreaded user_mem_abort() function to make it more
maintainable, reducing the amount of state being exposed to the
various helpers and rendering a substantial amount of state
immutable
- Expand the Stage-2 page table dumper to support NV shadow page
tables on a per-VM basis
- Tidy up the pKVM PSCI proxy code to be slightly less hard to
follow
- Fix both SPE and TRBE in non-VHE configurations so that they do not
generate spurious, out of context table walks that ultimately lead
to very bad HW lockups
- A small set of patches fixing the Stage-2 MMU freeing in error
cases
- Tighten-up accepted SMC immediate value to be only #0 for host
SMCCC calls
- The usual cleanups and other selftest churn
LoongArch:
- Use CSR_CRMD_PLV for kvm_arch_vcpu_in_kernel()
- Add DMSINTC irqchip in kernel support
RISC-V:
- Fix steal time shared memory alignment checks
- Fix vector context allocation leak
- Fix array out-of-bounds in pmu_ctr_read() and pmu_fw_ctr_read_hi()
- Fix double-free of sdata in kvm_pmu_clear_snapshot_area()
- Fix integer overflow in kvm_pmu_validate_counter_mask()
- Fix shift-out-of-bounds in make_xfence_request()
- Fix lost write protection on huge pages during dirty logging
- Split huge pages during fault handling for dirty logging
- Skip CSR restore if VCPU is reloaded on the same core
- Implement kvm_arch_has_default_irqchip() for KVM selftests
- Factored-out ISA checks into separate sources
- Added hideleg to struct kvm_vcpu_config
- Factored-out VCPU config into separate sources
- Support configuration of per-VM HGATP mode from KVM user space
s390:
- Support for ESA (31-bit) guests inside nested hypervisors
- Remove restriction on memslot alignment, which is not needed
anymore with the new gmap code
- Fix LPSW/E to update the bear (which of course is the breaking
event address register)
x86:
- Shut up various UBSAN warnings on reading module parameter before
they were initialized
- Don't zero-allocate page tables that are used for splitting
hugepages in the TDP MMU, as KVM is guaranteed to set all SPTEs in
the page table and thus write all bytes
- As an optimization, bail early when trying to unsync 4KiB mappings
if the target gfn can just be mapped with a 2MiB hugepage
x86 generic:
- Copy single-chunk MMIO write values into struct kvm_vcpu (more
precisely struct kvm_mmio_fragment) to fix use-after-free stack
bugs where KVM would dereference stack pointer after an exit to
userspace
- Clean up and comment the emulated MMIO code to try to make it
easier to maintain (not necessarily "easy", but "easier")
- Move VMXON+VMXOFF and EFER.SVME toggling out of KVM (not *all* of
VMX and SVM enabling) as it is needed for trusted I/O
- Advertise support for AVX512 Bit Matrix Multiply (BMM) instructions
- Immediately fail the build if a required #define is missing in one
of KVM's headers that is included multiple times
- Reject SET_GUEST_DEBUG with -EBUSY if there's an already injected
exception, mostly to prevent syzkaller from abusing the uAPI to
trigger WARNs, but also because it can help prevent userspace from
unintentionally crashing the VM
- Exempt SMM from CPUID faulting on Intel, as per the spec
- Misc hardening and cleanup changes
x86 (AMD):
- Fix and optimize IRQ window inhibit handling for AVIC; make it
per-vCPU so that KVM doesn't prematurely re-enable AVIC if multiple
vCPUs have to-be-injected IRQs
- Clean up and optimize the OSVW handling, avoiding a bug in which
KVM would overwrite state when enabling virtualization on multiple
CPUs in parallel. This should not be a problem because OSVW should
usually be the same for all CPUs
- Drop a WARN in KVM_MEMORY_ENCRYPT_REG_REGION where KVM complains
about a "too large" size based purely on user input
- Clean up and harden the pinning code for KVM_MEMORY_ENCRYPT_REG_REGION
- Disallow synchronizing a VMSA of an already-launched/encrypted
vCPU, as doing so for an SNP guest will crash the host due to an
RMP violation page fault
- Overhaul KVM's APIs for detecting SEV+ guests so that VM-scoped
queries are required to hold kvm->lock, and enforce it by lockdep.
Fix various bugs where sev_guest() was not ensured to be stable for
the whole duration of a function or ioctl
- Convert a pile of kvm->lock SEV code to guard()
- Play nicer with userspace that does not enable
KVM_CAP_EXCEPTION_PAYLOAD, for which KVM needs to set CR2 and DR6
as a response to ioctls such as KVM_GET_VCPU_EVENTS (even if the
payload would end up in EXITINFO2 rather than CR2, for example).
Only set CR2 and DR6 when consumption of the payload is imminent,
but on the other hand force delivery of the payload in all paths
where userspace retrieves CR2 or DR6
- Use vcpu->arch.cr2 when updating vmcb12's CR2 on nested #VMEXIT
instead of vmcb02->save.cr2. The value is out of sync after a
save/restore or after a #PF is injected into L2
- Fix a class of nSVM bugs where some fields written by the CPU are
not synchronized from vmcb02 to cached vmcb12 after VMRUN, and so
are not up-to-date when saved by KVM_GET_NESTED_STATE
- Fix a class of bugs where the ordering between KVM_SET_NESTED_STATE
and KVM_SET_{S}REGS could cause vmcb02 to be incorrectly
initialized after save+restore
- Add a variety of missing nSVM consistency checks
- Fix several bugs where KVM failed to correctly update VMCB fields
on nested #VMEXIT
- Fix several bugs where KVM failed to correctly synthesize #UD or
#GP for SVM-related instructions
- Add support for save+restore of virtualized LBRs (on SVM)
- Refactor various helpers and macros to improve clarity and
(hopefully) make the code easier to maintain
- Aggressively sanitize fields when copying from vmcb12, to guard
against unintentionally allowing L1 to utilize yet-to-be-defined
features
- Fix several bugs where KVM botched rAX legality checks when
emulating SVM instructions. There are remaining issues in that KVM
doesn't handle size prefix overrides for 64-bit guests
- Fail emulation of VMRUN/VMLOAD/VMSAVE if mapping vmcb12 fails
instead of somewhat arbitrarily synthesizing #GP (i.e. don't double
down on AMD's architectural but sketchy behavior of generating #GP
for "unsupported" addresses)
- Cache all used vmcb12 fields to further harden against TOCTOU bugs
x86 (Intel):
- Drop obsolete branch hint prefixes from the VMX instruction macros
- Use ASM_INPUT_RM() in __vmcs_writel() to coerce clang into using a
register input when appropriate
- Code cleanups
guest_memfd:
- Don't mark guest_memfd folios as accessed, as guest_memfd doesn't
support reclaim, the memory is unevictable, and there is no storage
to write back to
LoongArch selftests:
- Add KVM PMU test cases
s390 selftests:
- Enable more memory selftests
x86 selftests:
- Add support for Hygon CPUs in KVM selftests
- Fix a bug in the MSR test where it would get false failures on
AMD/Hygon CPUs with exactly one of RDPID or RDTSCP
- Add an MADV_COLLAPSE testcase for guest_memfd as a regression test
for a bug where the kernel would attempt to collapse guest_memfd
folios against KVM's will"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (373 commits)
KVM: x86: use inlines instead of macros for is_sev_*guest
x86/virt: Treat SVM as unsupported when running as an SEV+ guest
KVM: SEV: Goto an existing error label if charging misc_cg for an ASID fails
KVM: SVM: Move lock-protected allocation of SEV ASID into a separate helper
KVM: SEV: use mutex guard in snp_handle_guest_req()
KVM: SEV: use mutex guard in sev_mem_enc_unregister_region()
KVM: SEV: use mutex guard in sev_mem_enc_ioctl()
KVM: SEV: use mutex guard in snp_launch_update()
KVM: SEV: Assert that kvm->lock is held when querying SEV+ support
KVM: SEV: Document that checking for SEV+ guests when reclaiming memory is "safe"
KVM: SEV: Hide "struct kvm_sev_info" behind CONFIG_KVM_AMD_SEV=y
KVM: SEV: WARN on unhandled VM type when initializing VM
KVM: LoongArch: selftests: Add PMU overflow interrupt test
KVM: LoongArch: selftests: Add basic PMU event counting test
KVM: LoongArch: selftests: Add cpucfg read/write helpers
LoongArch: KVM: Add DMSINTC inject msi to vCPU
LoongArch: KVM: Add DMSINTC device support
LoongArch: KVM: Make vcpu_is_preempted() as a macro rather than function
LoongArch: KVM: Move host CSR_GSTAT save and restore in context switch
LoongArch: KVM: Move host CSR_EENTRY save and restore in context switch
...
- New fwctl driver for Broadcom RDMA NICs
- Bug fix for non-modular builds
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaeDp6gAKCRCFwuHvBreF
YXiBAQCUW1N0n7iTqlkbdbCs3GsI0d78x2dDN7aEc7SKDr/+CgEA69TVKDTLkIJa
CAzwZLkAKjRDUH7PXh65i8svJnwvzAk=
=MoNI
-----END PGP SIGNATURE-----
Merge tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/fwctl/fwctl
Pull fwctl updates from Jason Gunthorpe:
- New fwctl driver for Broadcom RDMA NICs
- Bug fix for non-modular builds
* tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/fwctl/fwctl:
fwctl: Fix class init ordering to avoid NULL pointer dereference on device removal
fwctl/bnxt_fwctl: Add documentation entries
fwctl/bnxt_fwctl: Add bnxt fwctl device
fwctl/bnxt_en: Create an aux device for fwctl
fwctl/bnxt_en: Refactor aux bus functions to be more generic
fwctl/bnxt_en: Move common definitions to include/linux/bnxt/
- Update QAT vfio-pci variant driver for Gen 5, 420xx devices.
(Vijay Sundar Selvamani, Suman Kumar Chakraborty, Giovanni Cabiddu)
- Fix vfio selftest MMIO DMA mapping selftest. (Alex Mastro)
- Conversions to const struct class in support of class_create()
deprecation. (Jori Koolstra)
- Improve selftest compiler compatibility by avoiding initializer
on variable-length array. (Manish Honap)
- Define new uAPI for drivers supporting migration to advise user-
space of new initial data for reducing target startup latency.
Implemented for mlx5 vfio-pci variant driver. (Yishai Hadas)
- Enable vfio selftests on aarch64, not just cross-compiles reporting
arm64. (Ted Logan)
- Update vfio selftest driver support to include additional DSA
devices. (Yi Lai)
- Unconditionally include debugfs root pointer in vfio device struct,
avoiding a build failure seen in hisi_acc variant driver without
debugfs otherwise. (Arnd Bergmann)
- Add support for the s390 ISM (Internal Shared Memory) device via
a new variant driver. The device is unique in the size of its BAR
space (256TiB) and lack of mmap support. (Julian Ruess)
- Enforce that vfio-pci drivers implement a name in their ops
structure for use in sequestering SR-IOV VFs. (Alex Williamson)
- Prune leftover group notifier code. (Paolo Bonzini)
- Fix Xe vfio-pci variant driver to avoid migration support as a
dependency in the reset path and missing release call.
(Michał Winiarski)
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEQvbATlQL0amee4qQI5ubbjuwiyIFAmnf/uURHGFsZXhAc2hh
emJvdC5vcmcACgkQI5ubbjuwiyJJ3g//duXzgV39ShUQLh+m/IfdBypyLd2qIu7L
u4vnQVm5Fnf5/MrMwTDC60U6GiXrM4eMm7wwsye+h28C7cFuv1pbgdb/ADfW87Mk
q6SV7jvdmSu6XVHl4r9qdPx4qI6tBvmirGFlrWGIdVkZGVL0Ywn4tuZehL7o6Chr
DAoQzmZpjkZtkSP6lmKSE5/cn1AAbNOvFNKpPsgHmrYn4uNQOQQjvy+8XqOWahT2
qBvGYJggjaMZt/iXCPPf0j0a0YsGM0DZw3vEkkZD/jkrFoak0F1EhzeKRTyCoPZe
6W1zsanNOWYvO/CWKPsav6r4J+5OL9tcqjOCIRgHiImErQZWvT8zcC5t+RPwYkTo
mQWnAB7ybMalsw29d+AcKyfEHxvatW3X9qPkLCktKXZ+VgoqXNd74MVcobeOEBfh
QD/vpMHS0duNik+QeeWxYYLTVWdqZdiaT0SQ89iGS1Vs+IYT+XareVvD/5pNUxDl
+MpLAtvLDfci4D3iTJoq0XOK6k5WMs5p7bnOtmkuZhB5GbGUhdJeQsgX7eybCE0U
kpIWsbjvtDm7vI61zTt/FnDHN4HqUc5Z759aE235aptlKD8AmKxdfOvgpdBtJ3Qb
zBNbcUoLzIYJim0qYg+KFLXbfmtVTSkNvGROvgZsNPk4w/FJRyC5pcC/Y6TnQBf2
H5Wqrdd3ZEs=
=NYEM
-----END PGP SIGNATURE-----
Merge tag 'vfio-v7.1-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Update QAT vfio-pci variant driver for Gen 5, 420xx devices (Vijay
Sundar Selvamani, Suman Kumar Chakraborty, Giovanni Cabiddu)
- Fix vfio selftest MMIO DMA mapping selftest (Alex Mastro)
- Conversions to const struct class in support of class_create()
deprecation (Jori Koolstra)
- Improve selftest compiler compatibility by avoiding initializer on
variable-length array (Manish Honap)
- Define new uAPI for drivers supporting migration to advise user-
space of new initial data for reducing target startup latency.
Implemented for mlx5 vfio-pci variant driver (Yishai Hadas)
- Enable vfio selftests on aarch64, not just cross-compiles reporting
arm64 (Ted Logan)
- Update vfio selftest driver support to include additional DSA devices
(Yi Lai)
- Unconditionally include debugfs root pointer in vfio device struct,
avoiding a build failure seen in hisi_acc variant driver without
debugfs otherwise (Arnd Bergmann)
- Add support for the s390 ISM (Internal Shared Memory) device via a
new variant driver. The device is unique in the size of its BAR space
(256TiB) and lack of mmap support (Julian Ruess)
- Enforce that vfio-pci drivers implement a name in their ops structure
for use in sequestering SR-IOV VFs (Alex Williamson)
- Prune leftover group notifier code (Paolo Bonzini)
- Fix Xe vfio-pci variant driver to avoid migration support as a
dependency in the reset path and missing release call (Michał
Winiarski)
* tag 'vfio-v7.1-rc1' of https://github.com/awilliam/linux-vfio: (23 commits)
vfio/xe: Add a missing vfio_pci_core_release_dev()
vfio/xe: Reorganize the init to decouple migration from reset
vfio: remove dead notifier code
vfio/pci: Require vfio_device_ops.name
MAINTAINERS: add VFIO ISM PCI DRIVER section
vfio/ism: Implement vfio_pci driver for ISM devices
vfio/pci: Rename vfio_config_do_rw() to vfio_pci_config_rw_single() and export it
vfio: unhide vdev->debug_root
vfio/qat: add support for Intel QAT 420xx VFs
vfio: selftests: Support DMR and GNR-D DSA devices
vfio: selftests: Build tests on aarch64
vfio/mlx5: Add REINIT support to VFIO_MIG_GET_PRECOPY_INFO
vfio/mlx5: consider inflight SAVE during PRE_COPY
net/mlx5: Add IFC bits for migration state
vfio: Adapt drivers to use the core helper vfio_check_precopy_ioctl
vfio: Add support for VFIO_DEVICE_FEATURE_MIG_PRECOPY_INFOv2
vfio: Define uAPI for re-init initial bytes during the PRE_COPY phase
vfio: selftests: Fix VLA initialisation in vfio_pci_irq_set()
vfio: uapi: fix comment typo
vfio: mdev: replace mtty_dev->vd_class with a const struct class
...
- Add remote buffers for pKVM
pKVM has a hypervisor component that is used to protect the guest from the
host kernel. This hypervisor is a black box to the kernel as the kernel is
to user space. The remote buffers are used to have a memory mapping
between the hypervisor and the kernel where kernel may send commands to
enable tracing within the hypervisor. Then the kernel will read this
memory mapping just like user space can read the memory mapped ring buffer
of the kernel tracing system.
Since the hypervisor only has a single context, it doesn't need to worry
about races between normal context, interrupt context and NMIs like the
kernel does. The ring buffer it uses doesn't need to be as complex. The
remote buffers are a simple version of the ring buffer that works in a
single context. They are still per-CPU and use sub buffers. The data
layout is the same as the kernel's ring buffer to share the same parsing.
Currently, only ARM64 implements pKVM, but there's work to implement it
also in x86. The remote buffer code is separated out from the ARM
implementation so that it can be used in the future by x86.
The ARM64 updates for pKVM is in the ARM/KVM tree and it merged in the
remote buffers of this tree.
- Merge commit f35dbac694 ("ring-buffer: Fix to update per-subbuf entries of persistent ring buffer")`
A fix was merged upstream that some new changes depended on. The upstream
commit was merged into the ring buffer branch to fulfil the dependency.
- Make the backup instance non reusable
The backup instance is a copy of the persistent ring buffer so that the
persistent ring buffer could start recording again without using the data
from the previous boot. The backup isn't for normal tracing. It is made
read-only, and after it is consumed, it is automatically removed.
- Have backup copy persistent instance before it starts recording
To allow the persistent ring buffer to start recording from the kernel
command line commands, move the copy of the backup instance to before the
the command line options start recording.
- Report header_page overwrite field as "char" and not "int'
The rust parser of the header_page file was triggering a warning when it
defined the overwrite variable as "int" but it was only a single byte in
size.
- Fix memory barriers for the trace_buffer CPU mask
When a CPU comes online, the bit is set to allow readers to know that the
CPU buffer is allocated. The bit is set after the allocation is done, and
a smp_wmb() is performed after the allocation and before the setting of
the bit. But instead of adding a smp_rmb() to all readers, since once a
buffer is created for a CPU it is not deleted if that CPU goes offline, so
this allocation is almost always done at boot up before any readers exist.
If for the unlikely case where a CPU comes online for the first time after
the system boot has finished, send an IPI to all CPUs to force the
smp_rmb() for each CPU.
- Show clock function being used in debugging ring buffer data
When the ring buffer checks are enabled and the ring buffer detects an
inconsistency in the times of the invents, print out the clock being used
when the error occurred. There was a very hard to hit bug that would
happen every so often and it ended up being only triggered when the jiffies
clock was being used. If the bug showed the clock being used, it would
have been much easier to find the problem (which was an internal function
was being traced which caused the clock accounting to go off).
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCad9S9xQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qpO8AQDwq2GKeups4aMfOjsUAXX9pIGWI9O1
eerhmazgi1LJLQEAtKRNSddOj/7nOJ5hLillJH4uAQOnJBkAWtjlTSUnLg8=
=HXkO
-----END PGP SIGNATURE-----
Merge tag 'trace-ringbuffer-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer updates from Steven Rostedt:
- Add remote buffers for pKVM
pKVM has a hypervisor component that is used to protect the guest
from the host kernel. This hypervisor is a black box to the kernel as
the kernel is to user space. The remote buffers are used to have a
memory mapping between the hypervisor and the kernel where kernel may
send commands to enable tracing within the hypervisor. Then the
kernel will read this memory mapping just like user space can read
the memory mapped ring buffer of the kernel tracing system.
Since the hypervisor only has a single context, it doesn't need to
worry about races between normal context, interrupt context and NMIs
like the kernel does. The ring buffer it uses doesn't need to be as
complex. The remote buffers are a simple version of the ring buffer
that works in a single context. They are still per-CPU and use sub
buffers. The data layout is the same as the kernel's ring buffer to
share the same parsing.
Currently, only ARM64 implements pKVM, but there's work to implement
it also in x86. The remote buffer code is separated out from the ARM
implementation so that it can be used in the future by x86.
The ARM64 updates for pKVM is in the ARM/KVM tree and it merged in
the remote buffers of this tree.
- Make the backup instance non reusable
The backup instance is a copy of the persistent ring buffer so that
the persistent ring buffer could start recording again without using
the data from the previous boot. The backup isn't for normal tracing.
It is made read-only, and after it is consumed, it is automatically
removed.
- Have backup copy persistent instance before it starts recording
To allow the persistent ring buffer to start recording from the
kernel command line commands, move the copy of the backup instance to
before the the command line options start recording.
- Report header_page overwrite field as "char" and not "int'
The rust parser of the header_page file was triggering a warning when
it defined the overwrite variable as "int" but it was only a single
byte in size.
- Fix memory barriers for the trace_buffer CPU mask
When a CPU comes online, the bit is set to allow readers to know that
the CPU buffer is allocated. The bit is set after the allocation is
done, and a smp_wmb() is performed after the allocation and before
the setting of the bit. But instead of adding a smp_rmb() to all
readers, since once a buffer is created for a CPU it is not deleted
if that CPU goes offline, so this allocation is almost always done at
boot up before any readers exist.
If for the unlikely case where a CPU comes online for the first time
after the system boot has finished, send an IPI to all CPUs to force
the smp_rmb() for each CPU.
- Show clock function being used in debugging ring buffer data
When the ring buffer checks are enabled and the ring buffer detects
an inconsistency in the times of the invents, print out the clock
being used when the error occurred. There was a very hard to hit bug
that would happen every so often and it ended up being only triggered
when the jiffies clock was being used. If the bug showed the clock
being used, it would have been much easier to find the problem (which
was an internal function was being traced which caused the clock
accounting to go off).
* tag 'trace-ringbuffer-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits)
ring-buffer: Prevent off-by-one array access in ring_buffer_desc_page()
ring-buffer: Report header_page overwrite as char
tracing: Allow backup to save persistent ring buffer before it starts
tracing/Documentation: Add a section about backup instance
tracing: Remove the backup instance automatically after read
tracing: Make the backup instance non-reusable
ring-buffer: Enforce read ordering of trace_buffer cpumask and buffers
ring-buffer: Show what clock function is used on timestamp errors
tracing: Check for undefined symbols in simple_ring_buffer
tracing: load/unload page callbacks for simple_ring_buffer
Documentation: tracing: Add tracing remotes
tracing: selftests: Add trace remote tests
tracing: Add a trace remote module for testing
tracing: Introduce simple_ring_buffer
ring-buffer: Export buffer_data_page and macros
tracing: Add helpers to create trace remote events
tracing: Add events/ root files to trace remotes
tracing: Add events to trace remotes
tracing: Add init callback to trace remotes
tracing: Add non-consuming read to trace remotes
...
API:
- Replace crypto_get_default_rng with crypto_stdrng_get_bytes.
- Remove simd skcipher support.
- Allow algorithm types to be disabled when CRYPTO_SELFTESTS is off.
Algorithms:
- Remove CPU-based des/3des acceleration.
- Add test vectors for authenc(hmac(md5),cbc(aes)).
- Add test vectors for authenc(hmac(md5),cbc(des)).
- Add test vectors for authenc(hmac(md5),rfc3686(ctr(aes))).
- Add test vectors for authenc(hmac(sha1),rfc3686(ctr(aes))).
- Add test vectors for authenc(hmac(sha224),rfc3686(ctr(aes))).
- Add test vectors for authenc(hmac(sha256),rfc3686(ctr(aes))).
- Add test vectors for authenc(hmac(sha384),rfc3686(ctr(aes))).
- Add test vectors for authenc(hmac(sha512),rfc3686(ctr(aes))).
- Replace spin lock with mutex in jitterentropy.
Drivers:
- Add authenc algorithms to safexcel.
- Add support for zstd in qat.
- Add wireless mode support for QAT GEN6.
- Add anti-rollback support for QAT GEN6.
- Add support for ctr(aes), gcm(aes), and ccm(aes) in dthev2.
-----BEGIN PGP SIGNATURE-----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=KoAB
-----END PGP SIGNATURE-----
Merge tag 'v7.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Replace crypto_get_default_rng with crypto_stdrng_get_bytes
- Remove simd skcipher support
- Allow algorithm types to be disabled when CRYPTO_SELFTESTS is off
Algorithms:
- Remove CPU-based des/3des acceleration
- Add test vectors for authenc(hmac(md5),cbc({aes,des})) and
authenc(hmac({md5,sha1,sha224,sha256,sha384,sha512}),rfc3686(ctr(aes)))
- Replace spin lock with mutex in jitterentropy
Drivers:
- Add authenc algorithms to safexcel
- Add support for zstd in qat
- Add wireless mode support for QAT GEN6
- Add anti-rollback support for QAT GEN6
- Add support for ctr(aes), gcm(aes), and ccm(aes) in dthev2"
* tag 'v7.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (129 commits)
crypto: af_alg - use sock_kmemdup in alg_setkey_by_key_serial
crypto: vmx - remove CRYPTO_DEV_VMX from Kconfig
crypto: omap - convert reqctx buffer to fixed-size array
crypto: atmel-sha204a - add Thorsten Blum as maintainer
crypto: atmel-ecc - add Thorsten Blum as maintainer
crypto: qat - fix IRQ cleanup on 6xxx probe failure
crypto: geniv - Remove unused spinlock from struct aead_geniv_ctx
crypto: qce - simplify qce_xts_swapiv()
crypto: hisilicon - Fix dma_unmap_single() direction
crypto: talitos - rename first/last to first_desc/last_desc
crypto: talitos - fix SEC1 32k ahash request limitation
crypto: jitterentropy - replace long-held spinlock with mutex
crypto: hisilicon - remove unused and non-public APIs for qm and sec
crypto: hisilicon/qm - drop redundant variable initialization
crypto: hisilicon/qm - remove else after return
crypto: hisilicon/qm - add const qualifier to info_name in struct qm_cmd_dump_item
crypto: hisilicon - fix the format string type error
crypto: ccree - fix a memory leak in cc_mac_digest()
crypto: qat - add support for zstd
crypto: qat - use swab32 macro
...
Including:
- Core:
- Support for RISC-V IO-page-table format in generic iommupt
code
- ARM-SMMU Updates:
- Introduction of an "invalidation array" for SMMUv3, which enables
future scalability work and optimisations for devices with a large
number of SMMUv3 instances.
- Update the conditions under which the SMMUv3 driver works around
hardware errata for invalidation on MMU-700 implementations.
- Fix broken command filtering for the host view of NVIDIA's "cmdqv"
SMMUv3 extension.
- MMU-500 device-tree binding additions for Qualcomm Eliza & Hawi SoCs.
- Intel VT-d:
- Support for dirty tracking on domains attached to PASID
- Removal of unnecessary read*()/write*() wrappers
- Improvements to the invalidation paths
- AMD Vi:
- Race-condition fixed in debugfs code
- Make log buffer allocation NUMA aware
- RISC-V:
- IO-TLB flushing improvements
- Minor fixes
-----BEGIN PGP SIGNATURE-----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=T6YT
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core:
- Support for RISC-V IO-page-table format in generic iommupt code
ARM-SMMU Updates:
- Introduction of an "invalidation array" for SMMUv3, which enables
future scalability work and optimisations for devices with a large
number of SMMUv3 instances
- Update the conditions under which the SMMUv3 driver works around
hardware errata for invalidation on MMU-700 implementations
- Fix broken command filtering for the host view of NVIDIA's "cmdqv"
SMMUv3 extension
- MMU-500 device-tree binding additions for Qualcomm Eliza & Hawi
SoCs
Intel VT-d:
- Support for dirty tracking on domains attached to PASID
- Removal of unnecessary read*()/write*() wrappers
- Improvements to the invalidation paths
AMD Vi:
- Race-condition fixed in debugfs code
- Make log buffer allocation NUMA aware
RISC-V:
- IO-TLB flushing improvements
- Minor fixes"
* tag 'iommu-updates-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (48 commits)
iommu/vt-d: Restore IOMMU_CAP_CACHE_COHERENCY
dt-bindings: arm-smmu: qcom: Add compatible for Hawi SoC
iommu/amd: Invalidate IRT cache for DMA aliases
iommu/riscv: Remove overflows on the invalidation path
iommu/amd: Fix clone_alias() to use the original device's devid
iommu/vt-d: Remove the remaining pages along the invalidation path
iommu/vt-d: Pass size_order to qi_desc_piotlb() not npages
iommu/vt-d: Split piotlb invalidation into range and all
iommu/vt-d: Remove dmar_writel() and dmar_writeq()
iommu/vt-d: Remove dmar_readl() and dmar_readq()
iommufd/selftest: Test dirty tracking on PASID
iommu/vt-d: Support dirty tracking on PASID
iommu/vt-d: Rename device_set_dirty_tracking() and pass dmar_domain pointer
iommu/vt-d: Block PASID attachment to nested domain with dirty tracking
iommu/dma: Always allow DMA-FQ when iommupt provides the iommu_domain
iommu/riscv: Fix signedness bug
iommu/amd: Fix illegal cap/mmio access in IOMMU debugfs
iommu/amd: Fix illegal device-id access in IOMMU debugfs
iommu/tegra241-cmdqv: Update uAPI to clarify HYP_OWN requirement
iommu/tegra241-cmdqv: Set supports_cmd op in tegra241_vcmdq_hw_init()
...
mm:
- two pass MMU interval notifiers
- add gpu active/reclaim per-node stat counters
math:
- provide __KERNEL_DIV_ROUND_CLOSEST() in UAPI
- implement DIV_ROUND_CLOSEST() with __KERNEL_DIV_ROUND_CLOSEST()
rust:
- shared tag with driver-core: register macro and io infra
- core: rework DMA coherent API
- core: add interop::list to interop with C linked lists
- core: add more num::Bounded operations
- core: enable generic_arg_infer and add EMSGSIZE
- workqueue: add ARef<T> support for work and delayed work
- add GPU buddy allocator abstraction
- add DRM shmem GEM helper abstraction
- allow drm:::Device to dispatch work and delayed work items
to driver private data
- add dma_resv_lock helper and raw accessors
core:
- introduce DRM RAS infrastructure over netlink
- add connector panel_type property
- fourcc: add ARM interleaved 64k modifier
- colorop: add destroy helper
- suballoc: split into alloc and init helpers
- mode: provide DRM_ARGB_GET*() macros for reading color components
edid:
- provide drm_output_color_Format
dma-buf:
- provide revoke mechanism for shared buffers
- rename move_notify to invalidate_mappings
- always enable move_notify
- protect dma_fence_ops with RCU and improve locking
- clean pages with helpers
atomic:
- allocate drm_private_state via callback
- helper: use system_percpu_wq
buddy:
- make buddy allocator available to gpu level
- add kernel-doc for buddy allocator
- improve aligned allocation
ttm:
- fix fence signalling
- improve tests and docs
- improve handling of gfp_retry_mayfail
- use per-node stat counters to track memory allocations
- port pool to use list_lru
- drop NUMA specific pools
- make pool shrinker numa aware
- track allocated pages per numa node
coreboot:
- cleanup coreboot framebuffer support
sched:
- fix race condition in drm_sched_fini
pagemap:
- enable THP support
- pass pagemap_addr by reference
gem-shmem:
- Track page accessed/dirty status across mmap/vmap
gpusvm:
- reenable device to device migration
- fix unbalanced unclock
bridge:
- anx7625: Support USB-C plus DT bindings
- connector: Fix EDID detection
- dw-hdmi-qp: Support Vendor-Specfic and SDP Infoframes; improve others
- fsl-ldb: Fix visual artifacts plus related DT property 'enable-termination-resistor'
- imx8qxp-pixel-link: Improve bridge reference handling
- lt9611: Support Port-B-only input plus DT bindings
- tda998x: Support DRM_BRIDGE_ATTACH_NO_CONNECTOR; Clean up
- Support TH1520 HDMI plus DT bindings
- waveshare-dsi: Fix register and attach; Support 1..4 DSI lanes plus DT bindings
- anx7625: Fix USB Type-C handling
- cdns-mhdp8546-core: Handle HDCP state in bridge atomic_check
- Support Lontium LT8713SX DP MST bridge plus DT bindings
- analogix_dp: Use DP helpers for link training
panel:
- panel-jdi-lt070me05000: Use mipi-dsi multi functions
- panel-edp: Support Add AUO B116XAT04.1 (HW: 1A); Support CMN N116BCL-EAK (C2); Support FriendlyELEC plus DT changes
- panel-edp: Fix timings for BOE NV140WUM-N64
- ilitek-ili9882t: Allow GPIO calls to sleep
- jadard: Support TAIGUAN XTI05101-01A
- lxd: Support LXD M9189A plus DT bindings
- mantix: Fix pixel clock; Clean up
- motorola: Support Motorola Atrix 4G and Droid X2 plus DT bindings
- novatek: Support Novatek/Tianma NT37700F plus DT bindings
- simple: Support EDT ET057023UDBA plus DT bindings; Support Powertip
PH800480T032-ZHC19 plus DT bindings; Support Waveshare 13.3"
- novatek-nt36672a: Use mipi_dsi_*_multi() functions
- panel-edp: Support BOE NV153WUM-N42, CMN N153JCA-ELK, CSW MNF307QS3-2
- support Himax HX83121A plus DT bindings
- support JuTouch JT070TM041 plus DT bindings
- support Samsung S6E8FC0 plus DT bindings
- himax-hx83102c: support Samsung S6E8FC0 plus DT bindings; support backlight
- ili9806e: support Rocktech RK050HR345-CT106A plus DT bindings
- simple: support Tianma TM050RDH03 plus DT bindings
amdgpu:
- enable DC by default on CIK APUs
- userq fence ioctl param size fixes
- set panel_type to OLED for eDP
- refactor DC i2c code
- FAMS2 update
- rework ttm handling to allow multiple engines
- DC DCE 6.x cleanup
- DC support for NUTMEG/TRAVIS DP bridge
- DCN 4.2 support
- GC12 idle power fix for compute
- use struct drm_edid in non-DC code
- enable NV12/P010 support on primary planes
- support newer IP discovery tables
- VCN/JPEG 5.0.2 support
- GC/MES 12.1 updates
- USERQ fixes
- add DC idle state manager
- eDP DSC seamless boot
amdkfd:
- GC 12.1 updates
- non 4K page fixes
xe:
- basic Xe3p_LPG and NVL-P enabling patches
- allow VM_BIND decompress support
- add purgeable buffer object support
- add xe_vm_get_property_ioctl
- restrict multi-lrc to VCS/VECS engines
- allow disabling VM overcommit in fault mode
- dGPU memory optimizations
- Workaround cleanups and simplification
- Allow VFs VRAM quote changes using sysfs
- convert GT stats to per-cpu counters
- pagefault refactors
- enable multi-queue on xe3p_xpc
- disable DCC on PTL
- make MMIO communication more robust
- disable D3Cold for BMG on specific platforms
- vfio: improve FLR sync for Xe VFIO
i915/display:
- C10/C20/LT PHY PLL divider verification
- use trans push mechanism to generate PSR frame change on LNL+
- refactor DP DSC slice config
- VGA decode refactoring
- refactor DPT, gen2-4 overlay, masked field register macro helpers
- refactor stolen memory allocation decisions
- prepare for UHBR DP tunnels
- refactor LT PHY PLL to use DPLL framework
- implement register polling/waiting in display code
- add shared stepping header between i915 and display
i915:
- fix potential overflow of shmem scatterlist length
nouveau:
- provide Z cull info to userspace
- initial GA100 support
- shutdown on PCI device shutdown
nova-core:
- harden GSP command queue
- add support for large RPCs
- simplify GSP sequencer and message handling
- refactor falcon firmware handling
- convert to new register macro
- conver to new DMA coherent API
- use checked arithmetic
- add debugfs support for gsp-rm log buffers
- fix aux device registration for multi-GPU
msm:
- CI:
- Uprev mesa
- Restore CI jobs for Qualcomm APQ8016 and APQ8096 devices
- Core:
- Switched to of_get_available_child_by_name()
- DPU:
- Fixes for DSC panels
- Fixed brownout because of the frequency / OPP mismatch
- Quad pipe preparation (not enabled yet)
- Switched to virtual planes by default
- Dropped VBIF_NRT support
- Added support for Eliza platform
- Reworked alpha handling
- Switched to correct CWB definitions on Eliza
- Dropped dummy INTF_0 on MSM8953
- Corrected INTFs related to DP-MST
- DP:
- Removed debug prints looking into PHY internals
- DSI:
- Fixes for DSC panels
- RGB101010 support
- Support for SC8280XP
- Moved PHY bindings from display/ to phy/
- GPU:
- Preemption support for x2-85 and a840
- IFPC support for a840
- SKU detection support for x2-85 and a840
- Expose AQE support (VK ray-pipeline)
- Avoid locking in VM_BIND fence signaling path
- Fix to avoid reclaim in GPU snapshot path
- Disallow foreign mapping of _NO_SHARE BOs
- HDMI:
- Fixed infoframes programming
- MDP5:
- Dropped support for MSM8974v1
- Dropped now unused code for MSM8974 v1 and SDM660 / MSM8998
panthor:
- add tracepoints for power and IRQs
- fix fence handling
- extend timestamp query with flags
- support various sources for timestamp queries
tyr:
- fix names and model/versions
rockchip:
- vop2: use drm logging function
- rk3576 displayport support
- support CRTC background color
atmel-hlcdc:
- support sana5d65 LCD controller
tilcdc:
- use DT bindings schema
- use managed DRM interfaces
- support DRM_BRIDGE_ATTACH_NO_CONNECTOR
verisilicon:
- support DC8200 + DT bindings
virtgpu:
- support PRIME import with 3D enabled
komeda:
- fix integer overflow in AFBC checks
mcde:
- improve bridge handling
gma500:
- use drm client buffer for fbdev framebuffer
amdxdna:
- add sensors ioctls
- provide NPU power estimate
- support column utilization sensor
- allow forcing DMA through IOMMU IOVA
- support per-BO mem usage queries
- refactor GEM implementation
ivpu:
- update boot API to v3.29.4
- limit per-user number of doorbells/contexts
- perform engine reset on TDR error
loongson:
- replace custom code with drm_gem_ttm_dumb_map_offset()
imx:
- support planes behind the primary plane
- fix bus-format selection
vkms:
- support CRTC background color
v3d:
- improve handling of struct v3d_stats
komeda:
- support Arm China Linlon D6 plus DT bindings
imagination:
- improve power-off sequence
- support context-reset notification from firmware
mediatek:
- mtk_dsi: enable hs clock during pre-enable
- Remove all conflicting aperture devices during probe
- Add support for mt8167 display blocks
-----BEGIN PGP SIGNATURE-----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=GX7Q
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2026-04-15' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Highlights:
- new DRM RAS infrastructure using netlink
- amdgpu: enable DC on CIK APUs, and more IP enablement, and more
user queue work
- xe: purgeable BO support, and new hw enablement
- dma-buf : add revocable operations
Full summary:
mm:
- two-pass MMU interval notifiers
- add gpu active/reclaim per-node stat counters
math:
- provide __KERNEL_DIV_ROUND_CLOSEST() in UAPI
- implement DIV_ROUND_CLOSEST() with __KERNEL_DIV_ROUND_CLOSEST()
rust:
- shared tag with driver-core: register macro and io infra
- core: rework DMA coherent API
- core: add interop::list to interop with C linked lists
- core: add more num::Bounded operations
- core: enable generic_arg_infer and add EMSGSIZE
- workqueue: add ARef<T> support for work and delayed work
- add GPU buddy allocator abstraction
- add DRM shmem GEM helper abstraction
- allow drm:::Device to dispatch work and delayed work items
to driver private data
- add dma_resv_lock helper and raw accessors
core:
- introduce DRM RAS infrastructure over netlink
- add connector panel_type property
- fourcc: add ARM interleaved 64k modifier
- colorop: add destroy helper
- suballoc: split into alloc and init helpers
- mode: provide DRM_ARGB_GET*() macros for reading color components
edid:
- provide drm_output_color_Format
dma-buf:
- provide revoke mechanism for shared buffers
- rename move_notify to invalidate_mappings
- always enable move_notify
- protect dma_fence_ops with RCU and improve locking
- clean pages with helpers
atomic:
- allocate drm_private_state via callback
- helper: use system_percpu_wq
buddy:
- make buddy allocator available to gpu level
- add kernel-doc for buddy allocator
- improve aligned allocation
ttm:
- fix fence signalling
- improve tests and docs
- improve handling of gfp_retry_mayfail
- use per-node stat counters to track memory allocations
- port pool to use list_lru
- drop NUMA specific pools
- make pool shrinker numa aware
- track allocated pages per numa node
coreboot:
- cleanup coreboot framebuffer support
sched:
- fix race condition in drm_sched_fini
pagemap:
- enable THP support
- pass pagemap_addr by reference
gem-shmem:
- Track page accessed/dirty status across mmap/vmap
gpusvm:
- reenable device to device migration
- fix unbalanced unclock
bridge:
- anx7625: Support USB-C plus DT bindings
- connector: Fix EDID detection
- dw-hdmi-qp: Support Vendor-Specfic and SDP Infoframes; improve
others
- fsl-ldb: Fix visual artifacts plus related DT property
'enable-termination-resistor'
- imx8qxp-pixel-link: Improve bridge reference handling
- lt9611: Support Port-B-only input plus DT bindings
- tda998x: Support DRM_BRIDGE_ATTACH_NO_CONNECTOR; Clean up
- Support TH1520 HDMI plus DT bindings
- waveshare-dsi: Fix register and attach; Support 1..4 DSI lanes plus
DT bindings
- anx7625: Fix USB Type-C handling
- cdns-mhdp8546-core: Handle HDCP state in bridge atomic_check
- Support Lontium LT8713SX DP MST bridge plus DT bindings
- analogix_dp: Use DP helpers for link training
panel:
- panel-jdi-lt070me05000: Use mipi-dsi multi functions
- panel-edp: Support Add AUO B116XAT04.1 (HW: 1A); Support CMN
N116BCL-EAK (C2); Support FriendlyELEC plus DT changes
- panel-edp: Fix timings for BOE NV140WUM-N64
- ilitek-ili9882t: Allow GPIO calls to sleep
- jadard: Support TAIGUAN XTI05101-01A
- lxd: Support LXD M9189A plus DT bindings
- mantix: Fix pixel clock; Clean up
- motorola: Support Motorola Atrix 4G and Droid X2 plus DT bindings
- novatek: Support Novatek/Tianma NT37700F plus DT bindings
- simple: Support EDT ET057023UDBA plus DT bindings; Support Powertip
PH800480T032-ZHC19 plus DT bindings; Support Waveshare 13.3"
- novatek-nt36672a: Use mipi_dsi_*_multi() functions
- panel-edp: Support BOE NV153WUM-N42, CMN N153JCA-ELK, CSW
MNF307QS3-2
- support Himax HX83121A plus DT bindings
- support JuTouch JT070TM041 plus DT bindings
- support Samsung S6E8FC0 plus DT bindings
- himax-hx83102c: support Samsung S6E8FC0 plus DT bindings; support
backlight
- ili9806e: support Rocktech RK050HR345-CT106A plus DT bindings
- simple: support Tianma TM050RDH03 plus DT bindings
amdgpu:
- enable DC by default on CIK APUs
- userq fence ioctl param size fixes
- set panel_type to OLED for eDP
- refactor DC i2c code
- FAMS2 update
- rework ttm handling to allow multiple engines
- DC DCE 6.x cleanup
- DC support for NUTMEG/TRAVIS DP bridge
- DCN 4.2 support
- GC12 idle power fix for compute
- use struct drm_edid in non-DC code
- enable NV12/P010 support on primary planes
- support newer IP discovery tables
- VCN/JPEG 5.0.2 support
- GC/MES 12.1 updates
- USERQ fixes
- add DC idle state manager
- eDP DSC seamless boot
amdkfd:
- GC 12.1 updates
- non 4K page fixes
xe:
- basic Xe3p_LPG and NVL-P enabling patches
- allow VM_BIND decompress support
- add purgeable buffer object support
- add xe_vm_get_property_ioctl
- restrict multi-lrc to VCS/VECS engines
- allow disabling VM overcommit in fault mode
- dGPU memory optimizations
- Workaround cleanups and simplification
- Allow VFs VRAM quote changes using sysfs
- convert GT stats to per-cpu counters
- pagefault refactors
- enable multi-queue on xe3p_xpc
- disable DCC on PTL
- make MMIO communication more robust
- disable D3Cold for BMG on specific platforms
- vfio: improve FLR sync for Xe VFIO
i915/display:
- C10/C20/LT PHY PLL divider verification
- use trans push mechanism to generate PSR frame change on LNL+
- refactor DP DSC slice config
- VGA decode refactoring
- refactor DPT, gen2-4 overlay, masked field register macro helpers
- refactor stolen memory allocation decisions
- prepare for UHBR DP tunnels
- refactor LT PHY PLL to use DPLL framework
- implement register polling/waiting in display code
- add shared stepping header between i915 and display
i915:
- fix potential overflow of shmem scatterlist length
nouveau:
- provide Z cull info to userspace
- initial GA100 support
- shutdown on PCI device shutdown
nova-core:
- harden GSP command queue
- add support for large RPCs
- simplify GSP sequencer and message handling
- refactor falcon firmware handling
- convert to new register macro
- conver to new DMA coherent API
- use checked arithmetic
- add debugfs support for gsp-rm log buffers
- fix aux device registration for multi-GPU
msm:
- CI:
- Uprev mesa
- Restore CI jobs for Qualcomm APQ8016 and APQ8096 devices
- Core:
- Switched to of_get_available_child_by_name()
- DPU:
- Fixes for DSC panels
- Fixed brownout because of the frequency / OPP mismatch
- Quad pipe preparation (not enabled yet)
- Switched to virtual planes by default
- Dropped VBIF_NRT support
- Added support for Eliza platform
- Reworked alpha handling
- Switched to correct CWB definitions on Eliza
- Dropped dummy INTF_0 on MSM8953
- Corrected INTFs related to DP-MST
- DP:
- Removed debug prints looking into PHY internals
- DSI:
- Fixes for DSC panels
- RGB101010 support
- Support for SC8280XP
- Moved PHY bindings from display/ to phy/
- GPU:
- Preemption support for x2-85 and a840
- IFPC support for a840
- SKU detection support for x2-85 and a840
- Expose AQE support (VK ray-pipeline)
- Avoid locking in VM_BIND fence signaling path
- Fix to avoid reclaim in GPU snapshot path
- Disallow foreign mapping of _NO_SHARE BOs
- HDMI:
- Fixed infoframes programming
- MDP5:
- Dropped support for MSM8974v1
- Dropped now unused code for MSM8974 v1 and SDM660 / MSM8998
panthor:
- add tracepoints for power and IRQs
- fix fence handling
- extend timestamp query with flags
- support various sources for timestamp queries
tyr:
- fix names and model/versions
rockchip:
- vop2: use drm logging function
- rk3576 displayport support
- support CRTC background color
atmel-hlcdc:
- support sana5d65 LCD controller
tilcdc:
- use DT bindings schema
- use managed DRM interfaces
- support DRM_BRIDGE_ATTACH_NO_CONNECTOR
verisilicon:
- support DC8200 + DT bindings
virtgpu:
- support PRIME import with 3D enabled
komeda:
- fix integer overflow in AFBC checks
mcde:
- improve bridge handling
gma500:
- use drm client buffer for fbdev framebuffer
amdxdna:
- add sensors ioctls
- provide NPU power estimate
- support column utilization sensor
- allow forcing DMA through IOMMU IOVA
- support per-BO mem usage queries
- refactor GEM implementation
ivpu:
- update boot API to v3.29.4
- limit per-user number of doorbells/contexts
- perform engine reset on TDR error
loongson:
- replace custom code with drm_gem_ttm_dumb_map_offset()
imx:
- support planes behind the primary plane
- fix bus-format selection
vkms:
- support CRTC background color
v3d:
- improve handling of struct v3d_stats
komeda:
- support Arm China Linlon D6 plus DT bindings
imagination:
- improve power-off sequence
- support context-reset notification from firmware
mediatek:
- mtk_dsi: enable hs clock during pre-enable
- Remove all conflicting aperture devices during probe
- Add support for mt8167 display blocks"
* tag 'drm-next-2026-04-15' of https://gitlab.freedesktop.org/drm/kernel: (1735 commits)
drm/ttm/tests: Remove checks from ttm_pool_free_no_dma_alloc
drm/ttm/tests: fix lru_count ASSERT
drm/vram: remove DRM_VRAM_MM_FILE_OPERATIONS from docs
drm/fb-helper: Fix a locking bug in an error path
dma-fence: correct kernel-doc function parameter @flags
ttm/pool: track allocated_pages per numa node.
ttm/pool: make pool shrinker NUMA aware (v2)
ttm/pool: drop numa specific pools
ttm/pool: port to list_lru. (v2)
drm/ttm: use gpu mm stats to track gpu memory allocations. (v4)
mm: add gpu active/reclaim per-node stat counters (v2)
gpu: nova-core: fix missing colon in SEC2 boot debug message
gpu: nova-core: vbios: use from_le_bytes() for PCI ROM header parsing
gpu: nova-core: bitfield: fix broken Default implementation
gpu: nova-core: falcon: pad firmware DMA object size to required block alignment
gpu: nova-core: gsp: fix undefined behavior in command queue code
drm/shmem_helper: Make sure PMD entries get the writeable upgrade
accel/ivpu: Trigger recovery on TDR with OS scheduling
drm/msm: Use of_get_available_child_by_name()
dt-bindings: display/msm: move DSI PHY bindings to phy/ subdir
...
Please consider pulling these changes from the signed vfs-7.1-rc1.mount.v2 tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCad3vFgAKCRCRxhvAZXjc
onXwAQDwEGvpMUUiuI/JWFqCA5vY5LXXr/36wdcs0iUL1uy9IgEAyOdnYhYkcaX1
3lm87f6OmYkhlq6enJbco7uT4CUzlQA=
=1Ls8
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.1-rc1.mount.v2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
- Add FSMOUNT_NAMESPACE flag to fsmount() that creates a new mount
namespace with the newly created filesystem attached to a copy of the
real rootfs. This returns a namespace file descriptor instead of an
O_PATH mount fd, similar to how OPEN_TREE_NAMESPACE works for
open_tree().
This allows creating a new filesystem and immediately placing it in a
new mount namespace in a single operation, which is useful for
container runtimes and other namespace-based isolation mechanisms.
This accompanies OPEN_TREE_NAMESPACE and avoids a needless detour via
OPEN_TREE_NAMESPACE to get the same effect. Will be especially useful
when you mount an actual filesystem to be used as the container
rootfs.
- Currently, creating a new mount namespace always copies the entire
mount tree from the caller's namespace. For containers and sandboxes
that intend to build their mount table from scratch this is wasteful:
they inherit a potentially large mount tree only to immediately tear
it down.
This series adds support for creating a mount namespace that contains
only a clone of the root mount, with none of the child mounts. Two
new flags are introduced:
- CLONE_EMPTY_MNTNS (0x400000000) for clone3(), using the 64-bit flag space
- UNSHARE_EMPTY_MNTNS (0x00100000) for unshare()
Both flags imply CLONE_NEWNS. The resulting namespace contains a
single nullfs root mount with an immutable empty directory. The
intended workflow is to then mount a real filesystem (e.g., tmpfs)
over the root and build the mount table from there.
- Allow MOVE_MOUNT_BENEATH to target the caller's rootfs, allowing to
switch out the rootfs without pivot_root(2).
The traditional approach to switching the rootfs involves
pivot_root(2) or a chroot_fs_refs()-based mechanism that atomically
updates fs->root for all tasks sharing the same fs_struct. This has
consequences for fork(), unshare(CLONE_FS), and setns().
This series instead decomposes root-switching into individually
atomic, locally-scoped steps:
fd_tree = open_tree(-EBADF, "/newroot", OPEN_TREE_CLONE | OPEN_TREE_CLOEXEC);
fchdir(fd_tree);
move_mount(fd_tree, "", AT_FDCWD, "/", MOVE_MOUNT_BENEATH | MOVE_MOUNT_F_EMPTY_PATH);
chroot(".");
umount2(".", MNT_DETACH);
Since each step only modifies the caller's own state, the
fork/unshare/setns races are eliminated by design.
A key step to making this possible is to remove the locked mount
restriction. Originally MOVE_MOUNT_BENEATH doesn't support mounting
beneath a mount that is locked. The locked mount protects the
underlying mount from being revealed. This is a core mechanism of
unshare(CLONE_NEWUSER | CLONE_NEWNS). The mounts in the new mount
namespace become locked. That effectively makes the new mount table
useless as the caller cannot ever get rid of any of the mounts no
matter how useless they are.
We can lift this restriction though. We simply transfer the locked
property from the top mount to the mount beneath. This works because
what we care about is to protect the underlying mount aka the parent.
The mount mounted between the parent and the top mount takes over the
job of protecting the parent mount from the top mount mount. This
leaves us free to remove the locked property from the top mount which
can consequently be unmounted:
unshare(CLONE_NEWUSER | CLONE_NEWNS)
and we inherit a clone of procfs on /proc then currently we cannot
unmount it as:
umount -l /proc
will fail with EINVAL because the procfs mount is locked.
After this series we can now do:
mount --beneath -t tmpfs tmpfs /proc
umount -l /proc
after which a tmpfs mount has been placed beneath the procfs mount.
The tmpfs mount has become locked and the procfs mount has become
unlocked.
This means you can safely modify an inherited mount table after
unprivileged namespace creation.
Afterwards we simply make it possible to move a mount beneath the
rootfs allowing to upgrade the rootfs.
Removing the locked restriction makes this very useful for containers
created with unshare(CLONE_NEWUSER | CLONE_NEWNS) to reshuffle an
inherited mount table safely and MOVE_MOUNT_BENEATH makes it possible
to switch out the rootfs instead of using the costly pivot_root(2).
* tag 'vfs-7.1-rc1.mount.v2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests/namespaces: remove unused utils.h include from listns_efault_test
selftests/fsmount_ns: add missing TARGETS and fix cap test
selftests/empty_mntns: fix wrong CLONE_EMPTY_MNTNS hex value in comment
selftests/empty_mntns: fix statmount_alloc() signature mismatch
selftests/statmount: remove duplicate wait_for_pid()
mount: always duplicate mount
selftests/filesystems: add MOVE_MOUNT_BENEATH rootfs tests
move_mount: allow MOVE_MOUNT_BENEATH on the rootfs
move_mount: transfer MNT_LOCKED
selftests/filesystems: add clone3 tests for empty mount namespaces
selftests/filesystems: add tests for empty mount namespaces
namespace: allow creating empty mount namespaces
selftests: add FSMOUNT_NAMESPACE tests
selftests/statmount: add statmount_alloc() helper
tools: update mount.h header
mount: add FSMOUNT_NAMESPACE
mount: simplify __do_loopback()
mount: start iterating from start of rbtree
Core & protocols
----------------
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP.
- Number of code moves to help the compiler with inlining.
Avoid output arguments for returning drop reason where possible.
- Rework drop handling within qdiscs to include more metadata
about the reason and dropping qdisc in the tracepoints.
- Remove the rtnl_lock use from IP Multicast Routing.
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two.
- Report TCP delayed ack timer information via socket diag.
- Add ip_local_port_step_width sysctl to allow distributing the randomly
selected ports more evenly throughout the allowed space.
- Add support for per-route tunsrc in IPv6 segment routing.
- Start work of switching sockopt handling to iov_iter.
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up.
- Support MSG_EOR in MPTCP.
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage.
- Remove UDP-Lite support (as announced in 2023).
- Remove support for building IPv6 as a module.
Remove the now unnecessary function calling indirection.
Cross-tree stuff
----------------
- Move Michael MIC code from generic crypto into wireless,
it's considered insecure but some WiFi networks still need it.
Netfilter
---------
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate.
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex.
- Add more opinionated input validation to lower security exposure.
- Make IPVS hash tables to be per-netns and resizable.
Wireless
--------
- Finished assoc frame encryption/EPPKE/802.1X-over-auth.
- Radar detection improvements.
- Add 6 GHz incumbent signal detection APIs.
- Multi-link support for FILS, probe response templates and
client probing.
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware.
Driver API
----------
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs.
- Add standard counters for reporting pause storm events
(implement in mlx5 and fbnic).
- Add configuration API for completion writeback buffering
(implement in mana).
- Support driver-initiated change of RSS context sizes.
- Support DPLL monitoring input frequency (implement in zl3073x).
- Support per-port resources in devlink (implement in mlx5).
Misc
----
- Expand the YAML spec for Netfilter.
Drivers
-------
- Software:
- macvlan: support multicast rx for bridge ports with shared source
MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EhQZ
-----END PGP SIGNATURE-----
Merge tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP
- Number of code moves to help the compiler with inlining. Avoid
output arguments for returning drop reason where possible
- Rework drop handling within qdiscs to include more metadata about
the reason and dropping qdisc in the tracepoints
- Remove the rtnl_lock use from IP Multicast Routing
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two
- Report TCP delayed ack timer information via socket diag
- Add ip_local_port_step_width sysctl to allow distributing the
randomly selected ports more evenly throughout the allowed space
- Add support for per-route tunsrc in IPv6 segment routing
- Start work of switching sockopt handling to iov_iter
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up
- Support MSG_EOR in MPTCP
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage
- Remove UDP-Lite support (as announced in 2023)
- Remove support for building IPv6 as a module. Remove the now
unnecessary function calling indirection
Cross-tree stuff:
- Move Michael MIC code from generic crypto into wireless, it's
considered insecure but some WiFi networks still need it
Netfilter:
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex
- Add more opinionated input validation to lower security exposure
- Make IPVS hash tables to be per-netns and resizable
Wireless:
- Finished assoc frame encryption/EPPKE/802.1X-over-auth
- Radar detection improvements
- Add 6 GHz incumbent signal detection APIs
- Multi-link support for FILS, probe response templates and client
probing
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
Driver API:
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs
- Add standard counters for reporting pause storm events (implement
in mlx5 and fbnic)
- Add configuration API for completion writeback buffering (implement
in mana)
- Support driver-initiated change of RSS context sizes
- Support DPLL monitoring input frequency (implement in zl3073x)
- Support per-port resources in devlink (implement in mlx5)
Misc:
- Expand the YAML spec for Netfilter
Drivers
- Software:
- macvlan: support multicast rx for bridge ports with shared
source MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB
pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support"
* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wireguard: allowedips: remove redundant space
tools: ynl: add sample for wireguard
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
MAINTAINERS: Add netkit selftest files
selftests/net: Add additional test coverage in nk_qlease
selftests/net: Split netdevsim tests from HW tests in nk_qlease
tools/ynl: Make YnlFamily closeable as a context manager
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
net: airoha: Fix VIP configuration for AN7583 SoC
net: caif: clear client service pointer on teardown
net: strparser: fix skb_head leak in strp_abort_strp()
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
selftests/bpf: add test for xdp_master_redirect with bond not up
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
sctp: disable BH before calling udp_tunnel_xmit_skb()
sctp: fix missing encap_port propagation for GSO fragments
net: airoha: Rely on net_device pointer in ETS callbacks
...
-----BEGIN PGP SIGNATURE-----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=k6te
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Welcome new BPF maintainers: Kumar Kartikeya Dwivedi, Eduard
Zingerman while Martin KaFai Lau reduced his load to Reviwer.
- Lots of fixes everywhere from many first time contributors. Thank you
All.
- Diff stat is dominated by mechanical split of verifier.c into
multiple components:
- backtrack.c: backtracking logic and jump history
- states.c: state equivalence
- cfg.c: control flow graph, postorder, strongly connected
components
- liveness.c: register and stack liveness
- fixups.c: post-verification passes: instruction patching, dead
code removal, bpf_loop inlining, finalize fastcall
8k line were moved. verifier.c still stands at 20k lines.
Further refactoring is planned for the next release.
- Replace dynamic stack liveness with static stack liveness based on
data flow analysis.
This improved the verification time by 2x for some programs and
equally reduced memory consumption. New logic is in liveness.c and
supported by constant folding in const_fold.c (Eduard Zingerman,
Alexei Starovoitov)
- Introduce BTF layout to ease addition of new BTF kinds (Alan Maguire)
- Use kmalloc_nolock() universally in BPF local storage (Amery Hung)
- Fix several bugs in linked registers delta tracking (Daniel Borkmann)
- Improve verifier support of arena pointers (Emil Tsalapatis)
- Improve verifier tracking of register bounds in min/max and tnum
domains (Harishankar Vishwanathan, Paul Chaignon, Hao Sun)
- Further extend support for implicit arguments in the verifier (Ihor
Solodrai)
- Add support for nop,nop5 instruction combo for USDT probes in libbpf
(Jiri Olsa)
- Support merging multiple module BTFs (Josef Bacik)
- Extend applicability of bpf_kptr_xchg (Kaitao Cheng)
- Retire rcu_trace_implies_rcu_gp() (Kumar Kartikeya Dwivedi)
- Support variable offset context access for 'syscall' programs (Kumar
Kartikeya Dwivedi)
- Migrate bpf_task_work and dynptr to kmalloc_nolock() (Mykyta
Yatsenko)
- Fix UAF in in open-coded task_vma iterator (Puranjay Mohan)
* tag 'bpf-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (241 commits)
selftests/bpf: cover short IPv4/IPv6 inputs with adjust_room
bpf: reject short IPv4/IPv6 inputs in bpf_prog_test_run_skb
selftests/bpf: Use memfd_create instead of shm_open in cgroup_iter_memcg
selftests/bpf: Add test for cgroup storage OOB read
bpf: Fix OOB in pcpu_init_value
selftests/bpf: Fix reg_bounds to match new tnum-based refinement
selftests/bpf: Add tests for non-arena/arena operations
bpf: Allow instructions with arena source and non-arena dest registers
bpftool: add missing fsession to the usage and docs of bpftool
docs/bpf: add missing fsession attach type to docs
bpf: add missing fsession to the verifier log
bpf: Move BTF checking logic into check_btf.c
bpf: Move backtracking logic to backtrack.c
bpf: Move state equivalence logic to states.c
bpf: Move check_cfg() into cfg.c
bpf: Move compute_insn_live_regs() into liveness.c
bpf: Move fixup/post-processing logic from verifier.c into fixups.c
bpf: Simplify do_check_insn()
bpf: Move checks for reserved fields out of the main pass
bpf: Delete unused variable
...
Kernel symbol flags:
- Replace the separate *_gpl symbol sections (__ksymtab_gpl and
__kcrctab_gpl) with a unified symbol table and a new
__kflagstab section. This section stores symbol flags, such as
the GPL-only flag, as an 8-bit bitset for each exported symbol.
This is a cleanup that simplifies symbol lookup in the module
loader by avoiding table fragmentation and will allow a cleaner
way to add more flags later if needed.
Module signature UAPI:
- Move struct module_signature to the UAPI headers to allow reuse
by tools outside the kernel proper, such as kmod and
scripts/sign-file. This also renames a few constants for clarity
and drops unused signature types as preparation for hash-based
module integrity checking work that's in progress.
Sysfs:
- Add a /sys/module/<module>/import_ns sysfs attribute to show
the symbol namespaces imported by loaded modules. This makes it
easier to verify driver API access at runtime on systems that
care about such things (e.g. Android).
Cleanups and fixes:
- Force sh_addr to 0 for all sections in module.lds. This prevents
non-zero section addresses when linking modules with ld.bfd -r,
which confused elfutils.
- Fix a memory leak of charp module parameters on module unload
when the kernel is configured with CONFIG_SYSFS=n.
- Override the -EEXIST error code returned by module_init() to
userspace. This prevents confusion with the errno reserved by
the module loader to indicate that a module is already loaded.
- Simplify the warning message and drop the stack dump on positive
returns from module_init().
- Drop unnecessary extern keywords from function declarations and
synchronize parse_args() arguments with their implementation.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSE9au1u/dCZerzchhaByWrOaGnegUCadmI0gAKCRBaByWrOaGn
euC6AQCpeQGQv/Z1Pu9DmBRaRD1MjXg1K1J8DN3qH7L8FbWDwAD9FtzAHw9GPOOP
0aQpDvcYKjdrU8OiuqtENvhzCV1RTA4=
=YaHp
-----END PGP SIGNATURE-----
Merge tag 'modules-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull module updates from Sami Tolvanen:
"Kernel symbol flags:
- Replace the separate *_gpl symbol sections (__ksymtab_gpl and
__kcrctab_gpl) with a unified symbol table and a new __kflagstab
section.
This section stores symbol flags, such as the GPL-only flag, as an
8-bit bitset for each exported symbol. This is a cleanup that
simplifies symbol lookup in the module loader by avoiding table
fragmentation and will allow a cleaner way to add more flags later
if needed.
Module signature UAPI:
- Move struct module_signature to the UAPI headers to allow reuse by
tools outside the kernel proper, such as kmod and
scripts/sign-file.
This also renames a few constants for clarity and drops unused
signature types as preparation for hash-based module integrity
checking work that's in progress.
Sysfs:
- Add a /sys/module/<module>/import_ns sysfs attribute to show the
symbol namespaces imported by loaded modules.
This makes it easier to verify driver API access at runtime on
systems that care about such things (e.g. Android).
Cleanups and fixes:
- Force sh_addr to 0 for all sections in module.lds. This prevents
non-zero section addresses when linking modules with 'ld.bfd -r',
which confused elfutils.
- Fix a memory leak of charp module parameters on module unload when
the kernel is configured with CONFIG_SYSFS=n.
- Override the -EEXIST error code returned by module_init() to
userspace. This prevents confusion with the errno reserved by the
module loader to indicate that a module is already loaded.
- Simplify the warning message and drop the stack dump on positive
returns from module_init().
- Drop unnecessary extern keywords from function declarations and
synchronize parse_args() arguments with their implementation"
* tag 'modules-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux: (23 commits)
module: Simplify warning on positive returns from module_init()
module: Override -EEXIST module return
documentation: remove references to *_gpl sections
module: remove *_gpl sections from vmlinux and modules
module: deprecate usage of *_gpl sections in module loader
module: use kflagstab instead of *_gpl sections
module: populate kflagstab in modpost
module: add kflagstab section to vmlinux and modules
module: define ksym_flags enumeration to represent kernel symbol flags
selftests/bpf: verify_pkcs7_sig: Use 'struct module_signature' from the UAPI headers
sign-file: use 'struct module_signature' from the UAPI headers
tools uapi headers: add linux/module_signature.h
module: Move 'struct module_signature' to UAPI
module: Give MODULE_SIG_STRING a more descriptive name
module: Give 'enum pkey_id_type' a more specific name
module: Drop unused signature types
extract-cert: drop unused definition of PKEY_ID_PKCS7
docs: symbol-namespaces: mention sysfs attribute
module: expose imported namespaces via sysfs
module: Remove extern keyword from param prototypes
...
Fair scheduling updates:
- Skip SCHED_IDLE rq for SCHED_IDLE tasks (Christian Loehle)
- Remove superfluous rcu_read_lock() in the wakeup path (K Prateek Nayak)
- Simplify the entry condition for update_idle_cpu_scan() (K Prateek Nayak)
- Simplify SIS_UTIL handling in select_idle_cpu() (K Prateek Nayak)
- Avoid overflow in enqueue_entity() (K Prateek Nayak)
- Update overutilized detection (Vincent Guittot)
- Prevent negative lag increase during delayed dequeue (Vincent Guittot)
- Clear buddies for preempt_short (Vincent Guittot)
- Implement more complex proportional newidle balance (Peter Zijlstra)
- Increase weight bits for avg_vruntime (Peter Zijlstra)
- Use full weight to __calc_delta() (Peter Zijlstra)
RT and DL scheduling updates:
- Fix incorrect schedstats for rt and dl thread (Dengjun Su)
- Skip group schedulable check with rt_group_sched=0 (Michal Koutný)
- Move group schedulability check to sched_rt_global_validate()
(Michal Koutný)
- Add reporting of runtime left & abs deadline to sched_getattr()
for DEADLINE tasks (Tommaso Cucinotta)
Scheduling topology updates by K Prateek Nayak:
- Compute sd_weight considering cpuset partitions
- Extract "imb_numa_nr" calculation into a separate helper
- Allocate per-CPU sched_domain_shared in s_data
- Switch to assigning "sd->shared" from s_data
- Remove sched_domain_shared allocation with sd_data
Energy-aware scheduling updates:
- Filter false overloaded_group case for EAS (Vincent Guittot)
- PM: EM: Switch to rcu_dereference_all() in wakeup path
(Dietmar Eggemann)
Infrastructure updates:
- Replace use of system_unbound_wq with system_dfl_wq (Marco Crivellari)
Proxy scheduling updates by John Stultz:
- Make class_schedulers avoid pushing current, and get rid of proxy_tag_curr()
- Minimise repeated sched_proxy_exec() checking
- Fix potentially missing balancing with Proxy Exec
- Fix and improve task::blocked_on et al handling
- Add assert_balance_callbacks_empty() helper
- Add logic to zap balancing callbacks if we pick again
- Move attach_one_task() and attach_task() helpers to sched.h
- Handle blocked-waiter migration (and return migration)
- Add K Prateek Nayak to scheduler reviewers for proxy execution
Misc cleanups and fixes by John Stultz, Joseph Salisbury,
Peter Zijlstra, K Prateek Nayak, Michal Koutný, Randy Dunlap,
Shrikanth Hegde, Vincent Guittot, Zhan Xusheng, Xie Yuanbin
and Vincent Guittot.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmncq4oRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1gxoA/8DD0SsMhBLaZLi+LAdY5fD6rGjOLGBtxz
NgwN8CAvPIFH7qFzPjAk7WtVXoKjF62sRDFvUaBEsliflRzOkBkYr3SnUYRORyBB
VRj7D6ymuWhxnhYsy8+Hviu/93c3GyEO59IYU0wIShxBzYBxqDfNxWvEUQte2Cin
1yFy4CICJeGpsBv9Ev+0LtesxtF5bnaioawbAYcpc2IdYsK+nsMKRvkwg1YSdLmh
v9+vIYuQBrclBn3OR7dsv2krBev5qodYtDZFwdJagE+6aaQv2zhWIfhetPpkzwrq
zhuzVZH+E9404Pn5EqJaw7KmU9eyBBwIUVqBaQfH73eSe5PY0tiSrpPU9foocUjo
4Td9sL11SLzjwpM4bIijW0ezZY8y+4Q0A21GwdcwAx3LPstXcF5GIjQ76dVFPRKN
Unbt6o+9O9NvMLg8CLzwonlFzOoLOrL+5eKJs+caOuOikT+cXnBQrukgB4ck3RAD
PIVD8XnufJTCKiDvx2vravLXsWiA2cg7citVsgc8y5FBcdhzv3YVqXd/lGkqg+09
7rVqE6NRDlkk4G4KZACTK45YVcVwXhQlMU/qiS0IduHdD0NtL9DPnQvdfzQWQehO
30cJ5vZ+fqbHspJ8AdPuqntUyfEvPTCbCT4Ou/AEcvO8NRQu2gplcq9mF4U46WZG
GBPWXvGHzM8=
=NjyS
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Fair scheduling updates:
- Skip SCHED_IDLE rq for SCHED_IDLE tasks (Christian Loehle)
- Remove superfluous rcu_read_lock() in the wakeup path (K Prateek Nayak)
- Simplify the entry condition for update_idle_cpu_scan() (K Prateek Nayak)
- Simplify SIS_UTIL handling in select_idle_cpu() (K Prateek Nayak)
- Avoid overflow in enqueue_entity() (K Prateek Nayak)
- Update overutilized detection (Vincent Guittot)
- Prevent negative lag increase during delayed dequeue (Vincent Guittot)
- Clear buddies for preempt_short (Vincent Guittot)
- Implement more complex proportional newidle balance (Peter Zijlstra)
- Increase weight bits for avg_vruntime (Peter Zijlstra)
- Use full weight to __calc_delta() (Peter Zijlstra)
RT and DL scheduling updates:
- Fix incorrect schedstats for rt and dl thread (Dengjun Su)
- Skip group schedulable check with rt_group_sched=0 (Michal Koutný)
- Move group schedulability check to sched_rt_global_validate()
(Michal Koutný)
- Add reporting of runtime left & abs deadline to sched_getattr()
for DEADLINE tasks (Tommaso Cucinotta)
Scheduling topology updates by K Prateek Nayak:
- Compute sd_weight considering cpuset partitions
- Extract "imb_numa_nr" calculation into a separate helper
- Allocate per-CPU sched_domain_shared in s_data
- Switch to assigning "sd->shared" from s_data
- Remove sched_domain_shared allocation with sd_data
Energy-aware scheduling updates:
- Filter false overloaded_group case for EAS (Vincent Guittot)
- PM: EM: Switch to rcu_dereference_all() in wakeup path
(Dietmar Eggemann)
Infrastructure updates:
- Replace use of system_unbound_wq with system_dfl_wq (Marco Crivellari)
Proxy scheduling updates by John Stultz:
- Make class_schedulers avoid pushing current, and get rid of proxy_tag_curr()
- Minimise repeated sched_proxy_exec() checking
- Fix potentially missing balancing with Proxy Exec
- Fix and improve task::blocked_on et al handling
- Add assert_balance_callbacks_empty() helper
- Add logic to zap balancing callbacks if we pick again
- Move attach_one_task() and attach_task() helpers to sched.h
- Handle blocked-waiter migration (and return migration)
- Add K Prateek Nayak to scheduler reviewers for proxy execution
Misc cleanups and fixes by John Stultz, Joseph Salisbury, Peter
Zijlstra, K Prateek Nayak, Michal Koutný, Randy Dunlap, Shrikanth
Hegde, Vincent Guittot, Zhan Xusheng, Xie Yuanbin and Vincent Guittot"
* tag 'sched-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
sched/eevdf: Clear buddies for preempt_short
sched/rt: Cleanup global RT bandwidth functions
sched/rt: Move group schedulability check to sched_rt_global_validate()
sched/rt: Skip group schedulable check with rt_group_sched=0
sched/fair: Avoid overflow in enqueue_entity()
sched: Use u64 for bandwidth ratio calculations
sched/fair: Prevent negative lag increase during delayed dequeue
sched/fair: Use sched_energy_enabled()
sched: Handle blocked-waiter migration (and return migration)
sched: Move attach_one_task and attach_task helpers to sched.h
sched: Add logic to zap balance callbacks if we pick again
sched: Add assert_balance_callbacks_empty helper
sched/locking: Add special p->blocked_on==PROXY_WAKING value for proxy return-migration
sched: Fix modifying donor->blocked on without proper locking
locking: Add task::blocked_lock to serialize blocked_on state
sched: Fix potentially missing balancing with Proxy Exec
sched: Minimise repeated sched_proxy_exec() checking
sched: Make class_schedulers avoid pushing current, and get rid of proxy_tag_curr()
MAINTAINERS: Add K Prateek Nayak to scheduler reviewers
sched/core: Get this cpu once in ttwu_queue_cond()
...
Merge in late fixes in preparation for the net-next PR.
Conflicts:
include/net/sch_generic.h
a6bd339dbb ("net_sched: fix skb memory leak in deferred qdisc drops")
ff2998f29f ("net: sched: introduce qdisc-specific drop reason tracing")
https://lore.kernel.org/adz0iX85FHMz0HdO@sirena.org.uk
drivers/net/ethernet/airoha/airoha_eth.c
1acdfbdb51 ("net: airoha: Fix VIP configuration for AN7583 SoC")
bf3471e6e6 ("net: airoha: Make flow control source port mapping dependent on nbq parameter")
Adjacent changes:
drivers/net/ethernet/airoha/airoha_ppe.c
f44218cd5e ("net: airoha: Reset PPE cpu port configuration in airoha_ppe_hw_init()")
7da62262ec ("inet: add ip_local_port_step_width sysctl to improve port usage distribution")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When registering VTL0 memory via MSHV_ADD_VTL0_MEMORY, the kernel
computes pgmap->vmemmap_shift as the number of trailing zeros in the
OR of start_pfn and last_pfn, intending to use the largest compound
page order both endpoints are aligned to.
However, this value is not clamped to MAX_FOLIO_ORDER, so a
sufficiently aligned range (e.g. physical range
[0x800000000000, 0x800080000000), corresponding to start_pfn=0x800000000
with 35 trailing zeros) can produce a shift larger than what
memremap_pages() accepts, triggering a WARN and returning -EINVAL:
WARNING: ... memremap_pages+0x512/0x650
requested folio size unsupported
The MAX_FOLIO_ORDER check was added by
commit 646b67d575 ("mm/memremap: reject unreasonable folio/compound
page sizes in memremap_pages()").
Fix this by clamping vmemmap_shift to MAX_FOLIO_ORDER so we always
request the largest order the kernel supports, in those cases, rather
than an out-of-range value.
Also fix the error path to propagate the actual error code from
devm_memremap_pages() instead of hard-coding -EFAULT, which was
masking the real -EINVAL return.
Fixes: 7bfe3b8ea6 ("Drivers: hv: Introduce mshv_vtl driver")
Cc: stable@vger.kernel.org
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=mVDJ
-----END PGP SIGNATURE-----
Merge tag 'for-7.1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"User visible changes:
- move shutdown ioctl support out of experimental features, a forced
stop of filesystem operation until the next unmount; additionally
there's a super block operation to forcibly remove a device from
under the filesystem that could lead to a shutdown or not if the
redundancy allows that
- report filesystem shutdown using fserror mechanism
- tree-checker updates:
- verify free space info, extent and bitmap items
- verify remap-tree items and related data in block group items
Performance improvements:
- speed up clearing first extent in the tracked range (+10%
throughput on sample workload)
- reduce COW rewrites of extent buffers during the same transaction
- avoid taking big device lock to update device stats during
transaction commit
- fix unnecessary flush on close when truncating empty files
(observed in practice on a backup application)
- prevent direct reclaim during compressed readahead to avoid stalls
under memory pressure
Notable fixes:
- fix chunk allocation strategy on RAID1-like block groups with
disproportionate device sizes, this could lead to ENOSPC due to
skewed reservation estimates
- adjust metadata reservation overcommit ratio to be less aggressive
and also try to flush if possible, this avoids ENOSPC and potential
transaction aborts in some edge cases (that are otherwise hard to
reproduce)
- fix silent IO error in encoded writes and ordered extent split in
zoned mode, the error was not correctly propagated to the address
space and could lead to zeroed ranges
- don't mark inline files NOCOMPRESS unexpectedly, the intent was to
do that for single block writes of regular files
- fix deadlock between reflink and transaction commit when using
flushoncommit
- fix overly strict item check of a running dev-replace operation
Core:
- zoned mode space reservation fixes:
- cap delayed refs metadata reservation to avoid overcommit
- update logic to reclaim partially unusable zones
- add another state to flush and reclaim partially used zone
- limit number of zones reclaimed in one go to avoid blocking
other operations
- don't let log trees consume global reserve on overcommit and fall
back to transaction commit
- revalidate extent buffer when checking its up-to-date status
- add self tests for zoned mode block group specifics
- reduce atomic allocations in some qgroup paths
- avoid unnecessary root node COW during snapshotting
- start new transaction in block group relocation conditionally
- faster check of NOCOW files on currently snapshotted root
- change how compressed bio size is tracked from bio and reduce the
structure size
- new tracepoint for search slot restart tracking
- checksum list manipulation improvements
- type, parameter cleanups, refactoring
- error handling improvements, transaction abort call adjustments"
* tag 'for-7.1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (116 commits)
btrfs: btrfs_log_dev_io_error() on all bio errors
btrfs: fix silent IO error loss in encoded writes and zoned split
btrfs: skip clearing EXTENT_DEFRAG for NOCOW ordered extents
btrfs: use BTRFS_FS_UPDATE_UUID_TREE_GEN flag for UUID tree rescan check
btrfs: remove duplicate journal_info reset on failure to commit transaction
btrfs: tag as unlikely if statements that check for fs in error state
btrfs: fix double free in create_space_info() error path
btrfs: fix double free in create_space_info_sub_group() error path
btrfs: do not reject a valid running dev-replace
btrfs: only invalidate btree inode pages after all ebs are released
btrfs: prevent direct reclaim during compressed readahead
btrfs: replace BUG_ON() with error return in cache_save_setup()
btrfs: zstd: don't cache sectorsize in a local variable
btrfs: zlib: don't cache sectorsize in a local variable
btrfs: zlib: drop redundant folio address variable
btrfs: lzo: inline read/write length helpers
btrfs: use common eb range validation in read_extent_buffer_to_user_nofault()
btrfs: read eb folio index right before loops
btrfs: rename local variable for offset in folio
btrfs: unify types for binary search variables
...
-----BEGIN PGP SIGNATURE-----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=IoaB
-----END PGP SIGNATURE-----
Merge tag 'for-7.1/io_uring-20260411' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring updates from Jens Axboe:
- Add a callback driven main loop for io_uring, and BPF struct_ops
on top to allow implementing custom event loop logic
- Decouple IOPOLL from being a ring-wide all-or-nothing setting,
allowing IOPOLL use cases to also issue certain white listed
non-polled opcodes
- Timeout improvements. Migrate internal timeout storage from
timespec64 to ktime_t for simpler arithmetic and avoid copying of
timespec data
- Zero-copy receive (zcrx) updates:
- Add a device-less mode (ZCRX_REG_NODEV) for testing and
experimentation where data flows through the copy fallback path
- Fix two-step unregistration regression, DMA length calculations,
xarray mark usage, and a potential 32-bit overflow in id
shifting
- Refactoring toward multi-area support: dedicated refill queue
struct, consolidated DMA syncing, netmem array refilling format,
and guard-based locking
- Zero-copy transmit (zctx) cleanup:
- Unify io_send_zc() and io_sendmsg_zc() into a single function
- Add vectorized registered buffer send for IORING_OP_SEND_ZC
- Add separate notification user_data via sqe->addr3 so
notification and completion CQEs can be distinguished without
extra reference counting
- Switch struct io_ring_ctx internal bitfields to explicit flag bits
with atomic-safe accessors, and annotate the known harmless races on
those flags
- Various optimizations caching ctx and other request fields in local
variables to avoid repeated loads, and cleanups for tctx setup, ring
fd registration, and read path early returns
* tag 'for-7.1/io_uring-20260411' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (58 commits)
io_uring: unify getting ctx from passed in file descriptor
io_uring/register: don't get a reference to the registered ring fd
io_uring/tctx: clean up __io_uring_add_tctx_node() error handling
io_uring/tctx: have io_uring_alloc_task_context() return tctx
io_uring/timeout: use 'ctx' consistently
io_uring/rw: clean up __io_read() obsolete comment and early returns
io_uring/zcrx: use correct mmap off constants
io_uring/zcrx: use dma_len for chunk size calculation
io_uring/zcrx: don't clear not allocated niovs
io_uring/zcrx: don't use mark0 for allocating xarray
io_uring: cast id to u64 before shifting in io_allocate_rbuf_ring()
io_uring/zcrx: reject REG_NODEV with large rx_buf_size
io_uring/cancel: validate opcode for IORING_ASYNC_CANCEL_OP
io_uring/rsrc: use io_cache_free() to free node
io_uring/zcrx: rename zcrx [un]register functions
io_uring/zcrx: check ctrl op payload struct sizes
io_uring/zcrx: cache fallback availability in zcrx ctx
io_uring/zcrx: warn on a repeated area append
io_uring/zcrx: consolidate dma syncing
io_uring/zcrx: netmem array as refiling format
...
-----BEGIN PGP SIGNATURE-----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=ga3t
-----END PGP SIGNATURE-----
Merge tag 'for-7.1/block-20260411' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- Add shared memory zero-copy I/O support for ublk, bypassing per-I/O
copies between kernel and userspace by matching registered buffer
PFNs at I/O time. Includes selftests.
- Refactor bio integrity to support filesystem initiated integrity
operations and arbitrary buffer alignment.
- Clean up bio allocation, splitting bio_alloc_bioset() into clear fast
and slow paths. Add bio_await() and bio_submit_or_kill() helpers,
unify synchronous bi_end_io callbacks.
- Fix zone write plug refcount handling and plug removal races. Add
support for serializing zone writes at QD=1 for rotational zoned
devices, yielding significant throughput improvements.
- Add SED-OPAL ioctls for Single User Mode management and a STACK_RESET
command.
- Add io_uring passthrough (uring_cmd) support to the BSG layer.
- Replace pp_buf in partition scanning with struct seq_buf.
- zloop improvements and cleanups.
- drbd genl cleanup, switching to pre_doit/post_doit.
- NVMe pull request via Keith:
- Fabrics authentication updates
- Enhanced block queue limits support
- Workqueue usage updates
- A new write zeroes device quirk
- Tagset cleanup fix for loop device
- MD pull requests via Yu Kuai:
- Fix raid5 soft lockup in retry_aligned_read()
- Fix raid10 deadlock with check operation and nowait requests
- Fix raid1 overlapping writes on writemostly disks
- Fix sysfs deadlock on array_state=clear
- Proactive RAID-5 parity building with llbitmap, with
write_zeroes_unmap optimization for initial sync
- Fix llbitmap barrier ordering, rdev skipping, and bitmap_ops
version mismatch fallback
- Fix bcache use-after-free and uninitialized closure
- Validate raid5 journal metadata payload size
- Various cleanups
- Various other fixes, improvements, and cleanups
* tag 'for-7.1/block-20260411' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (146 commits)
ublk: fix tautological comparison warning in ublk_ctrl_reg_buf
scsi: bsg: fix buffer overflow in scsi_bsg_uring_cmd()
block: refactor blkdev_zone_mgmt_ioctl
MAINTAINERS: update ublk driver maintainer email
Documentation: ublk: address review comments for SHMEM_ZC docs
ublk: allow buffer registration before device is started
ublk: replace xarray with IDA for shmem buffer index allocation
ublk: simplify PFN range loop in __ublk_ctrl_reg_buf
ublk: verify all pages in multi-page bvec fall within registered range
ublk: widen ublk_shmem_buf_reg.len to __u64 for 4GB buffer support
xfs: use bio_await in xfs_zone_gc_reset_sync
block: add a bio_submit_or_kill helper
block: factor out a bio_await helper
block: unify the synchronous bi_end_io callbacks
xfs: fix number of GC bvecs
selftests/ublk: add read-only buffer registration test
selftests/ublk: add filesystem fio verify test for shmem_zc
selftests/ublk: add hugetlbfs shmem_zc test for loop target
selftests/ublk: add shared memory zero-copy test
selftests/ublk: add UBLK_F_SHMEM_ZC support for loop target
...
-----BEGIN PGP SIGNATURE-----
iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCadfgCxAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbSl5cA/0QZjJ+4V2DVzJQM5qzmNK9He9uYaOs7F2Ks
xRvg7IebAPwMEcVY+CVQxD+YGj08UgM753yx4CRbhsu4k5mowEEJDQ==
=Lz9R
-----END PGP SIGNATURE-----
Merge tag 'landlock-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull Landlock update from Mickaël Salaün:
"This adds a new Landlock access right for pathname UNIX domain sockets
thanks to a new LSM hook, and a few fixes"
* tag 'landlock-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: (23 commits)
landlock: Document fallocate(2) as another truncation corner case
landlock: Document FS access right for pathname UNIX sockets
selftests/landlock: Simplify ruleset creation and enforcement in fs_test
selftests/landlock: Check that coredump sockets stay unrestricted
selftests/landlock: Audit test for LANDLOCK_ACCESS_FS_RESOLVE_UNIX
selftests/landlock: Test LANDLOCK_ACCESS_FS_RESOLVE_UNIX
selftests/landlock: Replace access_fs_16 with ACCESS_ALL in fs_test
samples/landlock: Add support for named UNIX domain socket restrictions
landlock: Clarify BUILD_BUG_ON check in scoping logic
landlock: Control pathname UNIX domain socket resolution by path
landlock: Use mem_is_zero() in is_layer_masks_allowed()
lsm: Add LSM hook security_unix_find
landlock: Fix kernel-doc warning for pointer-to-array parameters
landlock: Fix formatting in tsync.c
landlock: Improve kernel-doc "Return:" section consistency
landlock: Add missing kernel-doc "Return:" sections
selftests/landlock: Fix format warning for __u64 in net_test
selftests/landlock: Skip stale records in audit_match_record()
selftests/landlock: Drain stale audit records on init
selftests/landlock: Fix socket file descriptor leaks in audit helpers
...
-----BEGIN PGP SIGNATURE-----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=1rY2
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20260410' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
- Improved handling of unknown status requests from userspace
The current kernel code ignores unknown/unused request bits sent from
userspace and returns an error code based on the results of the
request(s) it does understand. The patch from Ricardo fixes this so
that unknown requests return an -EINVAL to userspace, making
compatibility a bit easier moving forward.
- A number of small style and formatting cleanups
* tag 'audit-pr-20260410' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: handle unknown status requests in audit_receive_msg()
audit: fix coding style issues
audit: remove redundant initialization of static variables to 0
audit: fix whitespace alignment in include/uapi/linux/audit.h
As noted in the blamed commit, the AR8035 and other PHYs from this
family advertise the Extended Next Page support by default, which may be
understood by some partners as this PHY being multi-gig capable.
The fix is to disable XNP advertising, which is done by setting bit 12
of the Auto-Negotiation Advertisement Register (MII_ADVERTISE).
The blamed commit incorrectly uses MDIO_AN_CTRL1_XNP, which is bit 13 as per
802.3 : 45.2.7.1 AN control register (Register 7.0)
BIT 12 in MII_ADVERTISE is wrapped by ADVERTISE_RESV, used by some
drivers such as the aquantia one. 802.3 Clause 28 defines bit 12 as
Extended Next Page ability, at least in recent versions of the standard.
Let's add a define for it and use it in the at803x driver.
Fixes: 3c51fa5d2a ("net: phy: ar803x: disable extended next page bit")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260410171021.1277138-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Please consider pulling these changes from the signed vfs-7.1-rc1.pidfs tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCadjZCwAKCRCRxhvAZXjc
omfuAQDckt5g7vxBr9hKdyrq1//nsu44fst/mRqr2iSYjuKfPQD/VN6Lw9e56Y/q
l4hHxsPPrSSxbijwng7im36iPIGdfwI=
=BbFh
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.1-rc1.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull clone and pidfs updates from Christian Brauner:
"Add three new clone3() flags for pidfd-based process lifecycle
management.
CLONE_AUTOREAP:
CLONE_AUTOREAP makes a child process auto-reap on exit without ever
becoming a zombie. This is a per-process property in contrast to
the existing auto-reap mechanism via SA_NOCLDWAIT or SIG_IGN for
SIGCHLD which applies to all children of a given parent.
Currently the only way to automatically reap children is to set
SA_NOCLDWAIT or SIG_IGN on SIGCHLD. This is a parent-scoped
property affecting all children which makes it unsuitable for
libraries or applications that need selective auto-reaping of
specific children while still being able to wait() on others.
CLONE_AUTOREAP stores an autoreap flag in the child's
signal_struct. When the child exits do_notify_parent() checks this
flag and causes exit_notify() to transition the task directly to
EXIT_DEAD. Since the flag lives on the child it survives
reparenting: if the original parent exits and the child is
reparented to a subreaper or init the child still auto-reaps when
it eventually exits. This is cleaner than forcing the subreaper to
get SIGCHLD and then reaping it. If the parent doesn't care the
subreaper won't care. If there's a subreaper that would care it
would be easy enough to add a prctl() that either just turns back
on SIGCHLD and turns off auto-reaping or a prctl() that just
notifies the subreaper whenever a child is reparented to it.
CLONE_AUTOREAP can be combined with CLONE_PIDFD to allow the parent
to monitor the child's exit via poll() and retrieve exit status via
PIDFD_GET_INFO. Without CLONE_PIDFD it provides a fire-and-forget
pattern. No exit signal is delivered so exit_signal must be zero.
CLONE_THREAD and CLONE_PARENT are rejected: CLONE_THREAD because
autoreap is a process-level property, and CLONE_PARENT because an
autoreap child reparented via CLONE_PARENT could become an
invisible zombie under a parent that never calls wait().
The flag is not inherited by the autoreap process's own children.
Each child that should be autoreaped must be explicitly created
with CLONE_AUTOREAP.
CLONE_NNP:
CLONE_NNP sets no_new_privs on the child at clone time. Unlike
prctl(PR_SET_NO_NEW_PRIVS) which a process sets on itself,
CLONE_NNP allows the parent to impose no_new_privs on the child at
creation without affecting the parent's own privileges.
CLONE_THREAD is rejected because threads share credentials.
CLONE_NNP is useful on its own for any spawn-and-sandbox pattern
but was specifically introduced to enable unprivileged usage of
CLONE_PIDFD_AUTOKILL.
CLONE_PIDFD_AUTOKILL:
This flag ties a child's lifetime to the pidfd returned from
clone3(). When the last reference to the struct file created by
clone3() is closed the kernel sends SIGKILL to the child. A pidfd
obtained via pidfd_open() for the same process does not keep the
child alive and does not trigger autokill - only the specific
struct file from clone3() has this property. This is useful for
container runtimes, service managers, and sandboxed subprocess
execution - any scenario where the child must die if the parent
crashes or abandons the pidfd or just wants a throwaway helper
process.
CLONE_PIDFD_AUTOKILL requires both CLONE_PIDFD and CLONE_AUTOREAP.
It requires CLONE_PIDFD because the whole point is tying the
child's lifetime to the pidfd. It requires CLONE_AUTOREAP because a
killed child with no one to reap it would become a zombie - the
primary use case is the parent crashing or abandoning the pidfd so
no one is around to call waitpid(). CLONE_THREAD is rejected
because autokill targets a process not a thread.
If CLONE_NNP is specified together with CLONE_PIDFD_AUTOKILL an
unprivileged user may spawn a process that is autokilled. The child
cannot escalate privileges via setuid/setgid exec after being
spawned. If CLONE_PIDFD_AUTOKILL is specified without CLONE_NNP the
caller must have have CAP_SYS_ADMIN in its user namespace"
* tag 'vfs-7.1-rc1.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests: check pidfd_info->coredump_code correctness
pidfds: add coredump_code field to pidfd_info
kselftest/coredump: reintroduce null pointer dereference
selftests/pidfd: add CLONE_PIDFD_AUTOKILL tests
selftests/pidfd: add CLONE_NNP tests
selftests/pidfd: add CLONE_AUTOREAP tests
pidfd: add CLONE_PIDFD_AUTOKILL
clone: add CLONE_NNP
clone: add CLONE_AUTOREAP
* New features:
- Add support for tracing in the standalone EL2 hypervisor code,
which should help both debugging and performance analysis.
This comes with a full infrastructure for 'remote' trace buffers
that can be exposed by non-kernel entities such as firmware.
- Add support for GICv5 Per Processor Interrupts (PPIs), as the
starting point for supporting the new GIC architecture in KVM.
- Finally add support for pKVM protected guests, with anonymous
memory being used as a backing store. About time!
* Improvements and bug fixes:
- Rework the dreaded user_mem_abort() function to make it more
maintainable, reducing the amount of state being exposed to
the various helpers and rendering a substantial amount of
state immutable.
- Expand the Stage-2 page table dumper to support NV shadow
page tables on a per-VM basis.
- Tidy up the pKVM PSCI proxy code to be slightly less hard
to follow.
- Fix both SPE and TRBE in non-VHE configurations so that they
do not generate spurious, out of context table walks that
ultimately lead to very bad HW lockups.
- A small set of patches fixing the Stage-2 MMU freeing in error
cases.
- Tighten-up accepted SMC immediate value to be only #0 for host
SMCCC calls.
- The usual cleanups and other selftest churn.
-----BEGIN PGP SIGNATURE-----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=/SuQ
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 7.1
* New features:
- Add support for tracing in the standalone EL2 hypervisor code,
which should help both debugging and performance analysis.
This comes with a full infrastructure for 'remote' trace buffers
that can be exposed by non-kernel entities such as firmware.
- Add support for GICv5 Per Processor Interrupts (PPIs), as the
starting point for supporting the new GIC architecture in KVM.
- Finally add support for pKVM protected guests, with anonymous
memory being used as a backing store. About time!
* Improvements and bug fixes:
- Rework the dreaded user_mem_abort() function to make it more
maintainable, reducing the amount of state being exposed to
the various helpers and rendering a substantial amount of
state immutable.
- Expand the Stage-2 page table dumper to support NV shadow
page tables on a per-VM basis.
- Tidy up the pKVM PSCI proxy code to be slightly less hard
to follow.
- Fix both SPE and TRBE in non-VHE configurations so that they
do not generate spurious, out of context table walks that
ultimately lead to very bad HW lockups.
- A small set of patches fixing the Stage-2 MMU freeing in error
cases.
- Tighten-up accepted SMC immediate value to be only #0 for host
SMCCC calls.
- The usual cleanups and other selftest churn.
1. Use CSR_CRMD_PLV in kvm_arch_vcpu_in_kernel().
2. Let vcpu_is_preempted() a macro & some enhanments.
3. Add DMSINTC irqchip in kernel support.
4. Add KVM PMU test cases for tools/selftests.
-----BEGIN PGP SIGNATURE-----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=zbdN
-----END PGP SIGNATURE-----
Merge tag 'loongarch-kvm-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v7.1
1. Use CSR_CRMD_PLV in kvm_arch_vcpu_in_kernel().
2. Let vcpu_is_preempted() a macro & some enhanments.
3. Add DMSINTC irqchip in kernel support.
4. Add KVM PMU test cases for tools/selftests.
* KVM: s390: vsie: Fix races with partial gmap invalidations
x86:
* KVM: x86: Use __DECLARE_FLEX_ARRAY() for UAPI structures with VLAs
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmnaOrgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPTOwf8DW6BXYgHdDOWiiQQETD+D/JWbceG
9fKMdNjt48It3hKWc9oJ2eZU2avRHf7d8hAIUIhOeiUbeVf4QrLUfQXzP9j/9P+T
vRpMlDf5Ampv3m8LxTBGESgwrlRHtWDGUFsE+CcVAIWEQfCsXnbwkeo3L9aCLTgA
ekrnHqsx+Oh/n2+siEp0Nz0n8gT0hCtbqAqJlVcuHpJvzRzeDvcnukvHxjIydR65
uIFY5dahzheGqbPhplGKKAdPCHD+/S6QB+ShqKrT92zeZvhPZrt1XHV4Bt/sKSkP
9uAeuJ+JtbZvMG7n8fCg5ebwqJrw15uddZcV8l3qIuxHzyZ/XzKYhQm4oA==
=7zjP
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"s390:
- vsie: Fix races with partial gmap invalidations
x86:
- Use __DECLARE_FLEX_ARRAY() for UAPI structures with VLAs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: s390: vsie: Fix races with partial gmap invalidations
KVM: x86: Use __DECLARE_FLEX_ARRAY() for UAPI structures with VLAs
Declare flexible arrays in uAPI structures using __DECLARE_FLEX_ARRAY() so
that KVM's uAPI headers can be included in C++ projects.
-----BEGIN PGP SIGNATURE-----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=VJsI
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-fixes-7.1' of https://github.com/kvm-x86/linux into HEAD
KVM x86 fixes for 7.1
Declare flexible arrays in uAPI structures using __DECLARE_FLEX_ARRAY() so
that KVM's uAPI headers can be included in C++ projects.
Before v7.0 is released, fix a few issues with the CFI patchset,
merged earlier in v7.0-rc, that primarily affect interfaces to
non-kernel code:
- Improve the prctl() interface for per-task indirect branch landing
pad control to expand abbreviations and to resemble the speculation
control prctl() interface
- Expand the "LP" and "SS" abbreviations in the ptrace uapi header
file to "branch landing pad" and "shadow stack", to improve
readability
- Fix a typo in a CFI-related macro name in the ptrace uapi header
file
- Ensure that the indirect branch tracking state and shadow stack
state are unlocked immediately after an exec() on the new task so
that libc subsequently can control it
- While working in this area, clean up the kernel-internal,
cross-architecture prctl() function names by expanding the
abbreviations mentioned above
-----BEGIN PGP SIGNATURE-----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=5/Ct
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-v7.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
"Before v7.0 is released, fix a few issues with the CFI patchset,
merged earlier in v7.0-rc, that primarily affect interfaces to
non-kernel code:
- Improve the prctl() interface for per-task indirect branch landing
pad control to expand abbreviations and to resemble the speculation
control prctl() interface
- Expand the "LP" and "SS" abbreviations in the ptrace uapi header
file to "branch landing pad" and "shadow stack", to improve
readability
- Fix a typo in a CFI-related macro name in the ptrace uapi header
file
- Ensure that the indirect branch tracking state and shadow stack
state are unlocked immediately after an exec() on the new task so
that libc subsequently can control it
- While working in this area, clean up the kernel-internal,
cross-architecture prctl() function names by expanding the
abbreviations mentioned above"
* tag 'riscv-for-linus-v7.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
prctl: cfi: change the branch landing pad prctl()s to be more descriptive
riscv: ptrace: cfi: expand "SS" references to "shadow stack" in uapi headers
prctl: rename branch landing pad implementation functions to be more explicit
riscv: ptrace: expand "LP" references to "branch landing pads" in uapi headers
riscv: cfi: clear CFI lock status in start_thread()
riscv: ptrace: cfi: fix "PRACE" typo in uapi header
The bridge-stp usermode helper is currently restricted to the initial
network namespace, preventing userspace STP daemons (e.g. mstpd) from
operating on bridges in other network namespaces. Since commit
ff62198553 ("bridge: Only call /sbin/bridge-stp for the initial
network namespace"), bridges in non-init namespaces silently fall
back to kernel STP with no way to use userspace STP.
Add a new bridge attribute IFLA_BR_STP_MODE that allows explicit
per-bridge control over STP mode selection:
BR_STP_MODE_AUTO (default) - Existing behavior: invoke the
/sbin/bridge-stp helper in init_net only; fall back to kernel STP
if it fails or in non-init namespaces.
BR_STP_MODE_USER - Directly enable userspace STP (BR_USER_STP)
without invoking the helper. Works in any network namespace.
Userspace is responsible for ensuring an STP daemon manages the
bridge.
BR_STP_MODE_KERNEL - Directly enable kernel STP (BR_KERNEL_STP)
without invoking the helper.
The mode can only be changed while STP is disabled, or set to the
same value (-EBUSY otherwise). IFLA_BR_STP_MODE is processed before
IFLA_BR_STP_STATE in br_changelink(), so both can be set atomically
in a single netlink message. The mode can also be changed in the
same message that disables STP.
The stp_mode struct field is u8 since all possible values fit, while
NLA_U32 is used for the netlink attribute since it occupies the same
space in the netlink message as NLA_U8.
A new stp_helper_active boolean tracks whether the /sbin/bridge-stp
helper was invoked during br_stp_start(), so that br_stp_stop() only
calls the helper for stop when it was called for start. This avoids
calling the helper asymmetrically when stp_mode changes between
start and stop.
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Andy Roulin <aroulin@nvidia.com>
Link: https://patch.msgid.link/20260405205224.3163000-2-aroulin@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
netkit: Support for io_uring zero-copy and AF_XDP
Containers use virtual netdevs to route traffic from a physical netdev
in the host namespace. They do not have access to the physical netdev
in the host and thus can't use memory providers or AF_XDP that require
reconfiguring/restarting queues in the physical netdev.
This patchset adds the concept of queue leasing to virtual netdevs that
allow containers to use memory providers and AF_XDP at native speed.
Leased queues are bound to a real queue in a physical netdev and act
as a proxy.
Memory providers and AF_XDP operations take an ifindex and queue id,
so containers would pass in an ifindex for a virtual netdev and a queue
id of a leased queue, which then gets proxied to the underlying real
queue.
We have implemented support for this concept in netkit and tested the
latter against Nvidia ConnectX-6 (mlx5) as well as Broadcom BCM957504
(bnxt_en) 100G NICs. For more details see the individual patches.
====================
Link: https://patch.msgid.link/20260402231031.447597-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a single device mode for netkit instead of netkit pairs. The primary
target for the paired devices is to connect network namespaces, of course,
and support has been implemented in projects like Cilium [0]. For the rxq
leasing the plan is to support two main scenarios related to single device
mode:
* For the use-case of io_uring zero-copy, the control plane can either
set up a netkit pair where the peer device can perform rxq leasing which
is then tied to the lifetime of the peer device, or the control plane
can use a regular netkit pair to connect the hostns to a Pod/container
and dynamically add/remove rxq leasing through a single device without
having to interrupt the device pair. In the case of io_uring, the memory
pool is used as skb non-linear pages, and thus the skb will go its way
through the regular stack into netkit. Things like the netkit policy when
no BPF is attached or skb scrubbing etc apply as-is in case the paired
devices are used, or if the backend memory is tied to the single device
and traffic goes through a paired device.
* For the use-case of AF_XDP, the control plane needs to use netkit in the
single device mode. The single device mode currently enforces only a
pass policy when no BPF is attached, and does not yet support BPF link
attachments for AF_XDP. skbs sent to that device get dropped at the
moment. Given AF_XDP operates at a lower layer of the stack tying this
to the netkit pair did not make sense. In future, the plan is to allow
BPF at the XDP layer which can: i) process traffic coming from the AF_XDP
application (e.g. QEMU with AF_XDP backend) to filter egress traffic or
to push selected egress traffic up to the single netkit device to the
local stack (e.g. DHCP requests), and ii) vice-versa skbs sent to the
single netkit into the AF_XDP application (e.g. DHCP replies). Also,
the control-plane can dynamically manage rxq leasing for the single
netkit device without having to interrupt (e.g. down/up cycle) the main
netkit pair for the Pod which has traffic going in and out.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Jordan Rife <jordan@jrife.io>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://docs.cilium.io/en/stable/operations/performance/tuning/#netkit-device-mode [0]
Link: https://patch.msgid.link/20260402231031.447597-11-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a ynl netdev family operation called queue-create that creates a
new queue on a netdevice:
name: queue-create
attribute-set: queue
flags: [admin-perm]
do:
request:
attributes:
- ifindex
- type
- lease
reply: &queue-create-op
attributes:
- id
This is a generic operation such that it can be extended for various
use cases in future. Right now it is mandatory to specify ifindex,
the queue type which is enforced to rx and a lease. The newly created
queue id is returned to the caller.
A queue from a virtual device can have a lease which refers to another
queue from a physical device. This is useful for memory providers
and AF_XDP operations which take an ifindex and queue id to allow
applications to bind against virtual devices in containers. The lease
couples both queues together and allows to proxy the operations from
a virtual device in a container to the physical device.
In future, the nested lease attribute can be lifted and made optional
for other use-cases such as dynamic queue creation for physical
netdevs. The lack of lease and the specification of the physical
device as an ifindex will imply that we need a real queue to be
allocated. Similarly, the queue type enforcement to rx can then be
lifted as well to support tx.
An early implementation had only driver-specific integration [0], but
in order for other virtual devices to reuse, it makes sense to have
this as a generic API in core net.
For leasing queues, the virtual netdev must have real_num_rx_queues
less than num_rx_queues at the time of calling queue-create. The
queue-type must be rx as only rx queues are supported for leasing
for now. We also enforce that the queue-create ifindex must point
to a virtual device, and that the nested lease attribute's ifindex
must point to a physical device. The nested lease attribute set
contains a netns-id attribute which is optional and can specify a
netns-id relative to the caller's netns. It requires cap_net_admin
and if the netns-id attribute is not specified, the lease ifindex
will be retrieved from the current netns. Also, it is modeled as
an s32 type similarly as done elsewhere in the stack.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://bpfconf.ebpf.io/bpfconf2025/bpfconf2025_material/lsfmmbpf_2025_netkit_borkmann.pdf [0]
Link: https://patch.msgid.link/20260402231031.447597-2-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The __u32 len field cannot represent a 4GB buffer (0x100000000
overflows to 0). Change it to __u64 so buffers up to 4GB can be
registered. Add a reserved field for alignment and validate it
is zero.
The kernel enforces a default max of 4GB (UBLK_SHMEM_BUF_SIZE_MAX)
which may be increased in future.
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260409133020.3780098-2-tom.leiming@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add device model for DMSINTC interrupt controller, implement basic
create/destroy/set_attr interfaces, and register device model to kvm
device table.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Allow filtering the resource dump to device-level or port-level
resources using the 'scope' option.
Example - dump only device-level resources:
$ devlink resource show scope dev
pci/0000:03:00.0:
name max_local_SFs size 128 unit entry dpipe_tables none
name max_external_SFs size 128 unit entry dpipe_tables none
pci/0000:03:00.1:
name max_local_SFs size 128 unit entry dpipe_tables none
name max_external_SFs size 128 unit entry dpipe_tables none
Example - dump only port-level resources:
$ devlink resource show scope port
pci/0000:03:00.0/196608:
name max_SFs size 128 unit entry dpipe_tables none
pci/0000:03:00.0/196609:
name max_SFs size 128 unit entry dpipe_tables none
pci/0000:03:00.1/196708:
name max_SFs size 128 unit entry dpipe_tables none
pci/0000:03:00.1/196709:
name max_SFs size 128 unit entry dpipe_tables none
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260407194107.148063-11-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEL65usyKPHcrRDEicpmLzj2vtYEkFAmnWuXcACgkQpmLzj2vt
YEnxBA/+IUv7shC+2A9VOmVpPKvF7aP82hyUAaALF0JaUtGuwmKNuMy4g13S+go/
5b6MWDlZ2pjN5lY6jFBVLcxfCysKKS3BKgfPza3y0PK1CoVeXzWniTuVjaHY9Mi+
+I64gAa/Ss1C872meBKvzNvgRnHzDFy6v7bp2Ly57Elack9ZZal6KfXBB3sMkVVB
VCcFAODhiPbr4lgRlMdn6WIEnbNM3TAkmPUKTb4iyOV5qyB5/JQPWT7oqTv0FV6A
z8AYAMVmpVFZyQT4NMKFdNPumziPTp4sQZuo9Wt8ybQuIlzaw1E1npkooNU9mfZd
suKwQAEFnGDWA0T/5rySQ9c2P732PyBgGXpTzPAUUVmsK+LYD/CK7gkCkfursDoI
RJQ8KE/RurQ7OKg8ABFpMw3OnmOfpwH7R4/EJ02PbXFEHWXGt37DrRiqJ5ud1UOj
khm6b+nF1NbLzg+B5fZP7DtlPC76wOXHlAbiFloqEkG6gJl0fLfhmgFi5Pg/GZ92
eWJdUJ5ECnJL9UL2FTDxmFEcIyNBrZh+TS0MHdfvhSUHoyGWO5WNzzTqB/RCrgBF
UVthzr/kSuvIkXbdjG1jDD/y+GHMVjv7HSSeh1p/l/1QfWljk6cglpl6LecaHC2Z
ee2Ra2Jnw7l8PvQq6VH9WkRU94CtQtCHEyztjPW9IaR8CQk+2Oo=
=KzYV
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2026040801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- handling of new keycodes for contextual AI usages (Akshai Murari)
- fix for UAF in hid-roccat (Benoît Sevens)
- deduplication of error logging in amd_sfh (Maximilian Pezzullo)
- various device-specific quirks and device ID additions (Even Xu, Lode
Willems, Leo Vriska)
* tag 'hid-for-linus-2026040801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
Input: add keycodes for contextual AI usages (HUTRR119)
HID: Kysona: Add support for VXE Dragonfly R1 Pro
HID: amd_sfh: don't log error when device discovery fails with -EOPNOTSUPP
HID: quirks: add HID_QUIRK_ALWAYS_POLL for 8BitDo Pro 3
HID: roccat: fix use-after-free in roccat_report_event
HID: Intel-thc-hid: Intel-quickspi: Add NVL Device IDs
HID: Intel-thc-hid: Intel-quicki2c: Add NVL Device IDs
- Fix missing leading space before closing */ in
comment block
- Add DRM_IOCTL_XE_EXEC_QUEUE_SET_PROPERTY to the
IOCTL overview list
- Add missing query types to the device query doc list:
DRM_XE_DEVICE_QUERY_UC_FW_VERSION,
DRM_XE_DEVICE_QUERY_OA_UNITS,
DRM_XE_DEVICE_QUERY_EU_STALL
- Fix ioctl's -> ioctls (not possessive, 2 occurrences)
- Remove duplicate parameter docs from
drm_xe_mem_range_attr overview (already documented
as inline member comments)
- Fix extra whitespace before /** on 2 lines in
drm_xe_mem_range_attr
- Add missing blank line before DRM_XE_VM_BIND_FLAG_DECOMPRESS
bullet to fix RST block quote warning
v3: more fix (item 4 to 7).
Assisted-by: GitHub Copilot:claude-opus-4.6
Cc: Xin Wang <x.wang@intel.com>
Reviewed-by: Xin Wang <x.wang@intel.com>
Link: https://patch.msgid.link/20260407030046.3394004-7-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Fix incorrect field names and formatting in code examples:
- .num_bb_per_exec -> .width (renamed struct field
in exec_queue_create examples)
- .num_eng_per_bb -> .num_placements (renamed struct
field in exec_queue_create examples)
- .atomic_val -> .atomic.val (correct nested struct
field access in madvise example)
- Remove unnecessary backslash escaping in UUID format
string (%\08x -> %08x)
- Fix descriptive text trapped inside code-block in
exec_queue_create doc (split into two code blocks)
v3: one more fix of split code-block in exec_queue_create doc.
Assisted-by: GitHub Copilot:claude-opus-4.6
Cc: Xin Wang <x.wang@intel.com>
Reviewed-by: Xin Wang <x.wang@intel.com>
Link: https://patch.msgid.link/20260407030046.3394004-6-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Fix incorrect kernel-doc cross-reference markup syntax
throughout xe_drm.h:
- @struct_name -> &struct name for cross-references to other
structs (19 occurrences)
- struct @name -> &struct name where struct keyword was
mixed with @ syntax (8 occurrences)
- enum @name -> &enum name for cross-references to other
enums (5 occurrences)
- &CONSTANT / @CONSTANT -> %CONSTANT for defines and enum
values (15 occurrences)
- @field references to members of other structs -> plain text,
since @ only applies to the current struct's members
(9 occurrences)
Per kernel-doc conventions (Documentation/doc-guide/kernel-doc.rst):
- '&struct name' creates hyperlinks to struct definitions
- '&enum name' creates hyperlinks to enum definitions
- '%NAME' references constants and defines
- '@name' is only for parameters/members of the current context
Assisted-by: GitHub Copilot:claude-opus-4.6
Suggested-by: Xin Wang <x.wang@intel.com>
Reviewed-by: Xin Wang <x.wang@intel.com>
Link: https://patch.msgid.link/20260407030046.3394004-5-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Fix various grammar issues in doc comments:
- flag are only valid -> flag is only valid
- should only ever used -> should only ever be used
- if isn't already -> if it isn't already
- Type of the this -> Type of this
- When sync passed in -> When sync is passed in
- the users responsibility -> the user's responsibility
- must qword aligned -> must be qword aligned
- for a observation -> for an observation
- a memory ranges -> memory ranges
- for each memory ranges -> for each memory range.
- Second ioctl call -> second ioctl call
Assisted-by: GitHub Copilot:claude-opus-4.6
Reviewed-by: Xin Wang <x.wang@intel.com>
Link: https://patch.msgid.link/20260407030046.3394004-3-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
* kvm-arm64/pkvm-protected-guest: (41 commits)
: .
: pKVM support for protected guests, implementing the very long
: awaited support for anonymous memory, as the elusive guestmem
: has failed to deliver on its promises despite a multi-year
: effort. Patches courtesy of Will Deacon. From the initial cover
: letter:
:
: "[...] this patch series implements support for protected guest
: memory with pKVM, where pages are unmapped from the host as they are
: faulted into the guest and can be shared back from the guest using pKVM
: hypercalls. Protected guests are created using a new machine type
: identifier and can be booted to a shell using the kvmtool patches
: available at [2], which finally means that we are able to test the pVM
: logic in pKVM. Since this is an incremental step towards full isolation
: from the host (for example, the CPU register state and DMA accesses are
: not yet isolated), creating a pVM requires a developer Kconfig option to
: be enabled in addition to booting with 'kvm-arm.mode=protected' and
: results in a kernel taint."
: .
KVM: arm64: Don't hold 'vm_table_lock' across guest page reclaim
KVM: arm64: Allow get_pkvm_hyp_vm() to take a reference to a dying VM
KVM: arm64: Prevent teardown finalisation of referenced 'hyp_vm'
drivers/virt: pkvm: Add Kconfig dependency on DMA_RESTRICTED_POOL
KVM: arm64: Rename PKVM_PAGE_STATE_MASK
KVM: arm64: Extend pKVM page ownership selftests to cover guest hvcs
KVM: arm64: Extend pKVM page ownership selftests to cover forced reclaim
KVM: arm64: Register 'selftest_vm' in the VM table
KVM: arm64: Extend pKVM page ownership selftests to cover guest donation
KVM: arm64: Add some initial documentation for pKVM
KVM: arm64: Allow userspace to create protected VMs when pKVM is enabled
KVM: arm64: Implement the MEM_UNSHARE hypercall for protected VMs
KVM: arm64: Implement the MEM_SHARE hypercall for protected VMs
KVM: arm64: Add hvc handler at EL2 for hypercalls from protected VMs
KVM: arm64: Return -EFAULT from VCPU_RUN on access to a poisoned pte
KVM: arm64: Reclaim faulting page from pKVM in spurious fault handler
KVM: arm64: Introduce hypercall to force reclaim of a protected page
KVM: arm64: Annotate guest donations with handle and gfn in host stage-2
KVM: arm64: Change 'pkvm_handle_t' to u16
KVM: arm64: Introduce host_stage2_set_owner_metadata_locked()
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/vgic-v5-ppi: (40 commits)
: .
: Add initial GICv5 support for KVM guests, only adding PPI support
: for the time being. Patches courtesy of Sascha Bischoff.
:
: From the cover letter:
:
: "This is v7 of the patch series to add the virtual GICv5 [1] device
: (vgic_v5). Only PPIs are supported by this initial series, and the
: vgic_v5 implementation is restricted to the CPU interface,
: only. Further patch series are to follow in due course, and will add
: support for SPIs, LPIs, the GICv5 IRS, and the GICv5 ITS."
: .
KVM: arm64: selftests: Add no-vgic-v5 selftest
KVM: arm64: selftests: Introduce a minimal GICv5 PPI selftest
KVM: arm64: gic-v5: Communicate userspace-driveable PPIs via a UAPI
Documentation: KVM: Introduce documentation for VGICv5
KVM: arm64: gic-v5: Probe for GICv5 device
KVM: arm64: gic-v5: Set ICH_VCTLR_EL2.En on boot
KVM: arm64: gic-v5: Introduce kvm_arm_vgic_v5_ops and register them
KVM: arm64: gic-v5: Hide FEAT_GCIE from NV GICv5 guests
KVM: arm64: gic: Hide GICv5 for protected guests
KVM: arm64: gic-v5: Mandate architected PPI for PMU emulation on GICv5
KVM: arm64: gic-v5: Enlighten arch timer for GICv5
irqchip/gic-v5: Introduce minimal irq_set_type() for PPIs
KVM: arm64: gic-v5: Initialise ID and priority bits when resetting vcpu
KVM: arm64: gic-v5: Create and initialise vgic_v5
KVM: arm64: gic-v5: Support GICv5 interrupts with KVM_IRQ_LINE
KVM: arm64: gic-v5: Implement direct injection of PPIs
KVM: arm64: Introduce set_direct_injection irq_op
KVM: arm64: gic-v5: Trap and mask guest ICC_PPI_ENABLERx_EL1 writes
KVM: arm64: gic-v5: Check for pending PPIs
KVM: arm64: gic-v5: Clear TWI if single task running
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/hyp-tracing: (40 commits)
: .
: EL2 tracing support, adding both 'remote' ring-buffer
: infrastructure and the tracing itself, courtesy of
: Vincent Donnefort. From the cover letter:
:
: "The growing set of features supported by the hypervisor in protected
: mode necessitates debugging and profiling tools. Tracefs is the
: ideal candidate for this task:
:
: * It is simple to use and to script.
:
: * It is supported by various tools, from the trace-cmd CLI to the
: Android web-based perfetto.
:
: * The ring-buffer, where are stored trace events consists of linked
: pages, making it an ideal structure for sharing between kernel and
: hypervisor.
:
: This series first introduces a new generic way of creating remote events and
: remote buffers. Then it adds support to the pKVM hypervisor."
: .
tracing: selftests: Extend hotplug testing for trace remotes
tracing: Non-consuming read for trace remotes with an offline CPU
tracing: Adjust cmd_check_undefined to show unexpected undefined symbols
tracing: Restore accidentally removed SPDX tag
KVM: arm64: avoid unused-variable warning
tracing: Generate undef symbols allowlist for simple_ring_buffer
KVM: arm64: tracing: add ftrace dependency
tracing: add more symbols to whitelist
tracing: Update undefined symbols allow list for simple_ring_buffer
KVM: arm64: Fix out-of-tree build for nVHE/pKVM tracing
tracing: selftests: Add hypervisor trace remote tests
KVM: arm64: Add selftest event support to nVHE/pKVM hyp
KVM: arm64: Add hyp_enter/hyp_exit events to nVHE/pKVM hyp
KVM: arm64: Add event support to the nVHE/pKVM hyp and trace remote
KVM: arm64: Add trace reset to the nVHE/pKVM hyp
KVM: arm64: Sync boot clock with the nVHE/pKVM hyp
KVM: arm64: Add trace remote for the nVHE/pKVM hyp
KVM: arm64: Add tracing capability for the nVHE/pKVM hyp
KVM: arm64: Support unaligned fixmap in the pKVM hyp
KVM: arm64: Initialise hyp_nr_cpus for nVHE hyp
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
Should have no effect in practice; all of these use the
nft_parse_register_load/store apis which is mandatory anyway due
to the need to further validate the register load/store, e.g.
that the size argument doesn't result in out-of-bounds load/store.
OTOH this is a simple method to reject obviously wrong input
at earlier stage.
Signed-off-by: Florian Westphal <fw@strlen.de>
Introduce checks for FREE_SPACE_INFO item, which include:
- Key alignment check
The objectid is the logical bytenr of the chunk/bg, and offset is the
length of the chunk/bg, thus they should all be aligned to the fs
block size.
- Item size check
The FREE_SPACE_INFO should a fix size.
- Flags check
The flags member should have no other flags than
BTRFS_FREE_SPACE_USING_BITMAPS.
For future expansion, introduce a new macro
BTRFS_FREE_SPACE_FLAGS_MASK for such checks.
And since we're here, the BTRFS_FREE_SPACE_USING_BITMAPS should not
use unsigned long long, as the flags is only 32 bits wide.
So fix that to use unsigned long.
- Extent count check
That member shows how many free space bitmap/extent items there are
inside the chunk/bg.
We know the chunk size (from key->offset), thus there should be at
most (key->offset >> sectorsize_bits) blocks inside the chunk.
Use that value as the upper limit and if that counter is larger than
that, there is a high chance it's a bitflip in high bits.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
* Add a new access right LANDLOCK_ACCESS_FS_RESOLVE_UNIX, which
controls the lookup operations for named UNIX domain sockets. The
resolution happens during connect() and sendmsg() (depending on
socket type).
* Change access_mask_t from u16 to u32 (see below)
* Hook into the path lookup in unix_find_bsd() in af_unix.c, using a
LSM hook. Make policy decisions based on the new access rights
* Increment the Landlock ABI version.
* Minor test adaptations to keep the tests working.
* Document the design rationale for scoped access rights,
and cross-reference it from the header documentation.
With this access right, access is granted if either of the following
conditions is met:
* The target socket's filesystem path was allow-listed using a
LANDLOCK_RULE_PATH_BENEATH rule, *or*:
* The target socket was created in the same Landlock domain in which
LANDLOCK_ACCESS_FS_RESOLVE_UNIX was restricted.
In case of a denial, connect() and sendmsg() return EACCES, which is
the same error as it is returned if the user does not have the write
bit in the traditional UNIX file system permissions of that file.
The access_mask_t type grows from u16 to u32 to make space for the new
access right. This also doubles the size of struct layer_access_masks
from 32 byte to 64 byte. To avoid memory layout inconsistencies between
architectures (especially m68k), pack and align struct access_masks [2].
Document the (possible future) interaction between scoped flags and
other access rights in struct landlock_ruleset_attr, and summarize the
rationale, as discussed in code review leading up to [3].
This feature was created with substantial discussion and input from
Justin Suess, Tingmao Wang and Mickaël Salaün.
Cc: Tingmao Wang <m@maowtm.org>
Cc: Justin Suess <utilityemal77@gmail.com>
Cc: Kuniyuki Iwashima <kuniyu@google.com>
Suggested-by: Jann Horn <jannh@google.com>
Link[1]: https://github.com/landlock-lsm/linux/issues/36
Link[2]: https://lore.kernel.org/all/20260401.Re1Eesu1Yaij@digikod.net/
Link[3]: https://lore.kernel.org/all/20260205.8531e4005118@gnoack.org/
Signed-off-by: Günther Noack <gnoack3000@gmail.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20260327164838.38231-5-gnoack3000@gmail.com
[mic: Fix kernel-doc formatting, pack and align access_masks]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
LANDLOCK_RESTRICT_SELF_TSYNC does not allow
LANDLOCK_RESTRICT_SELF_LOG_SUBDOMAINS_OFF with ruleset_fd=-1, preventing
a multithreaded process from atomically propagating subdomain log muting
to all threads without creating a domain layer. Relax the fd=-1
condition to accept TSYNC alongside LOG_SUBDOMAINS_OFF, and update the
documentation accordingly.
Add flag validation tests for all TSYNC combinations with ruleset_fd=-1,
and audit tests verifying both transition directions: muting via TSYNC
(logged to not logged) and override via TSYNC (not logged to logged).
Cc: Günther Noack <gnoack@google.com>
Cc: stable@vger.kernel.org
Fixes: 42fc7e6543 ("landlock: Multithreading support for landlock_restrict_self()")
Reviewed-by: Günther Noack <gnoack3000@gmail.com>
Link: https://lore.kernel.org/r/20260407164107.2012589-2-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Add UBLK_F_SHMEM_ZC (1ULL << 19) to the UAPI header and UBLK_F_ALL.
Switch ublk_support_shmem_zc() and ublk_dev_support_shmem_zc() from
returning false to checking the actual flag, enabling the shared
memory zero-copy feature for devices that request it.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://patch.msgid.link/20260331153207.3635125-4-ming.lei@redhat.com
[axboe: ublk_buf_reg -> ublk_shmem_buf_reg errors]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add control commands for registering and unregistering shared memory
buffers for zero-copy I/O:
- UBLK_U_CMD_REG_BUF (0x18): pins pages from userspace, inserts PFN
ranges into a per-device maple tree for O(log n) lookup during I/O.
Buffer pointers are tracked in a per-device xarray. Returns the
assigned buffer index.
- UBLK_U_CMD_UNREG_BUF (0x19): removes PFN entries and unpins pages.
Queue freeze/unfreeze is handled internally so userspace need not
quiesce the device during registration.
Also adds:
- UBLK_IO_F_SHMEM_ZC flag and addr encoding helpers in UAPI header
(16-bit buffer index supporting up to 65536 buffers)
- Data structures (ublk_buf, ublk_buf_range) and xarray/maple tree
- __ublk_ctrl_reg_buf() helper for PFN insertion with error unwinding
- __ublk_ctrl_unreg_buf() helper for cleanup reuse
- ublk_support_shmem_zc() / ublk_dev_support_shmem_zc() stubs
(returning false — feature not enabled yet)
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://patch.msgid.link/20260331153207.3635125-2-ming.lei@redhat.com
[axboe: fixup ublk_buf_reg -> ublk_shmem_buf_reg errors, comments]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmnS4Y8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGe6AIAI4rjLLPlxUKQbx4
JP9lsKH7vqeIVvuMqzFau7+B8ngJ+80OESnBF7n43oNEqdJ0NYiL+rPtcGgBjZDP
yUu5DlzVSxpAIQBZe2Nc0dz/5NbT9QxKyC5Yl/whpNIR7UHx1RFvDJYxwN9xKxTw
ggLQevKAnHrKjIOKjq70Yqz2T1JMXc9Wp/xpur0oGioiFW/lH24CgHDXjE2Ka9oD
wqhotzThuSaaVDmqZ8WNFKxx2onR4r8/NpljaVT2mWRJ2+IMF4pMOBJZRQiNZtRa
1CsoJ3aV6pslAsuC1dLboCMul48VUgyu7l3xQwXVuA5bRO1jqt5ILWC10g09OItU
7CxGTno=
=1TRg
-----END PGP SIGNATURE-----
Merge tag 'v7.0-rc7' into usb-next
We need the USB fixes in here to build on and for testing
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
struct drm_syncobj_eventfd was documented, but
DRM_IOCTL_SYNCOBJ_EVENTFD was not. This prevents references to this
define from being properly linkified in docs.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Michel Dänzer <michel.daenzer@mailbox.org>
Link: https://patch.msgid.link/20260327171812.128290-1-contact@emersion.fr
Per Linus' comments requesting the replacement of "INDIR_BR_LP" in the
indirect branch tracking prctl()s with something more readable, and
suggesting the use of the speculation control prctl()s as an exemplar,
reimplement the prctl()s and related constants that control per-task
forward-edge control flow integrity.
This primarily involves two changes. First, the prctls are
restructured to resemble the style of the speculative execution
workaround control prctls PR_{GET,SET}_SPECULATION_CTRL, to make them
easier to extend in the future. Second, the "indir_br_lp" abbrevation
is expanded to "branch_landing_pads" to be less telegraphic. The
kselftest and documentation is adjusted accordingly.
Link: https://lore.kernel.org/linux-riscv/CAHk-=whhSLGZAx3N5jJpb4GLFDqH_QvS07D+6BnkPWmCEzTAgw@mail.gmail.com/
Cc: Deepak Gupta <debug@rivosinc.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Add DPLL_A_FREQUENCY_MONITOR device attribute to allow control over
the frequency monitor feature. The attribute uses the existing
dpll_feature_state enum (enable/disable) and is present in both
device-get reply and device-set request.
Add DPLL_A_PIN_MEASURED_FREQUENCY pin attribute to expose the measured
input frequency in millihertz (mHz). The attribute is present in the
pin-get reply. Add DPLL_PIN_MEASURED_FREQUENCY_DIVIDER constant to
allow userspace to extract integer and fractional parts.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260402184057.1890514-2-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Changes for v7.1
CI:
- Uprev mesa
- Restore CI jobs for Qualcomm APQ8016 and APQ8096 devices
Core:
- Switched to of_get_available_child_by_name()
DPU:
- Fixes for DSC panels
- Fixed brownout because of the frequency / OPP mismatch
- Quad pipe preparation (not enabled yet)
- Switched to virtual planes by default
- Dropped VBIF_NRT support
- Added support for Eliza platform
- Reworked alpha handling
- Switched to correct CWB definitions on Eliza
- Dropped dummy INTF_0 on MSM8953
- Corrected INTFs related to DP-MST
DP:
- Removed debug prints looking into PHY internals
DSI:
- Fixes for DSC panels
- RGB101010 support
- Support for SC8280XP
- Moved PHY bindings from display/ to phy/
GPU:
- Preemption support for x2-85 and a840
- IFPC support for a840
- SKU detection support for x2-85 and a840
- Expose AQE support (VK ray-pipeline)
- Avoid locking in VM_BIND fence signaling path
- Fix to avoid reclaim in GPU snapshot path
- Disallow foreign mapping of _NO_SHARE BOs
- Couple a6xx gpu snapshot fixes
- Various other fixes
HDMI:
- Fixed infoframes programming
MDP5:
- Dropped support for MSM8974v1
- Dropped now unused code for MSM8974 v1 and SDM660 / MSM8998
Also misc small fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <rob.clark@oss.qualcomm.com>
Link: https://patch.msgid.link/CACSVV012vn73BaUfk=Hw4WkQHZNPHiqfifWEunAqMc2EGOWUEQ@mail.gmail.com
Now that all the bits are properly addressed, provide a mechanism
for testing ESA mode guests in nested configurations.
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
[farman@us.ibm.com: Updated commit message]
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
The following fix in sched/urgent:
e08d007f9d ("sched/debug: Fix avg_vruntime() usage")
is in conflict with this pending commit in sched/core:
4823725d9d ("sched/fair: Increase weight bits for avg_vruntime")
Both modify the same variable definition and initialization blocks,
resolve it by merging the two.
Conflicts:
kernel/sched/debug.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Allow creating a zcrx instance without attaching it to a net device.
All data will be copied through the fallback path. The user is also
expected to use ZCRX_CTRL_FLUSH_RQ to handle overflows as it normally
should even with a netdev, but it becomes even more relevant as there
will likely be no one to automatically pick up buffers.
Apart from that, it follows the zcrx uapi for the I/O path, and is
useful for testing, experimentation, and potentially for the copy
receive path in the future if improved.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/674f8ad679c5a0bc79d538352b3042cf0999596e.1774261953.git.asml.silence@gmail.com
[axboe: fix spelling error in uapi header and commit message]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Clarify bpf_ringbuf_discard() documentation for BPF_RB_NO_WAKEUP.
Discarded ring buffer records are still left in the ring buffer and are
only skipped when user space consumes them. This can matter when
BPF_RB_NO_WAKEUP is used: a later submit relying on adaptive wakeup
might not wake the consumer, because the discarded record still needs to
be consumed first.
Scenario:
epoll_wait(rb_fd); // blocks
rec = bpf_ringbuf_reserve(&rb, ...);
bpf_ringbuf_discard(rec, BPF_RB_NO_WAKEUP);
rec = bpf_ringbuf_reserve(&rb, ...);
bpf_ringbuf_submit(rec, 0); // valid record, but no wakeup
Document this in bpf_ringbuf_discard() to make the interaction between
discarded records, user-space consumption, and adaptive wakeups explicit.
Reported-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260331130612.3762433-1-eyal.birger@gmail.com
----
v2: adapt wording per feedback from Andrii.
AQE (Applicaton Qrisc Engine) is required to support VK ray-pipeline. Two
conditions should be met to use this HW:
1. AQE firmware should be loaded and programmed
2. Preemption support
Expose a new MSM_PARAM to allow userspace to query its support.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/714685/
Message-ID: <20260327-a8xx-gpu-batch2-v2-17-2b53c38d2101@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Create bnxt_fwctl device. This will bind to bnxt's aux device.
On the upper edge, it will register with the fwctl subsystem.
It will make use of bnxt's ULP functions to send FW commands.
Link: https://patch.msgid.link/r/20260314151605.932749-5-pavan.chebbi@broadcom.com
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The TCG Opal device could enter a state where no new session can be
created, blocking even Discovery or PSID reset. While a power cycle
or waiting for the timeout should work, there is another possibility
for recovery: using the Stack Reset command.
The Stack Reset command is defined in the TCG Storage Architecture Core
Specification and is mandatory for all Opal devices (see Section 3.3.6
of the Opal SSC specification).
This patch implements the Stack Reset command. Sending it should clear
all active sessions immediately, allowing subsequent commands to run
successfully. While it is a TCG transport layer command, the Linux
kernel implements only Opal ioctls, so it makes sense to use the
IOC_OPAL ioctl interface.
The Stack Reset takes no arguments; the response can be success or pending.
If the command reports a pending state, userspace can try to repeat it;
in this case, the code returns -EBUSY.
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Reviewed-by: Ondrej Kozina <okozina@redhat.com>
Link: https://patch.msgid.link/20260310095349.411287-1-gmazyland@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmnJqkAeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGwGYH/RMBphrIZUnC2zwq
mS+lwIve9Tb6LTwlCw+DbR0WROsiLUWCuL6AsMy6mEsWMVtj18uFmWv0vX0RP1o8
GuFNt2oTJ+3tqZgdlUi6//IZddXntiqwyvibocfrHIdLYfNdpTFCW5D7bnVEIkl3
9z7MH8IwZNajri38c+sqqpDhhsKfG6PgAzPea3kibw/XwcLquJv1h6KeCPoFAmKe
Tl8Pl96T9ESGUWa5Cu65CwQgaqITLH7BkyceVuUDXJGBJDN3wPhuD1ciPkjSCuJW
ou2WyCr30uEfsmFlYrmsHR/aF6SuGYgXFGzL+kmWhOk2nCjAwi8Xxue4tIAYKD/s
0GPb+hg=
=At5f
-----END PGP SIGNATURE-----
BackMerge tag 'v7.0-rc6' into drm-next
Linux 7.0-rc6
Requested by a few people on irc to resolve conflicts in other tress.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Introduce a new VM type for KVM/arm64 to allow userspace to request the
creation of a "protected VM" when the host has booted with pKVM enabled.
For now, this feature results in a taint on first use as many aspects of
a protected VM are not yet protected!
Tested-by: Fuad Tabba <tabba@google.com>
Tested-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20260330144841.26181-32-will@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
The spec for Embedded USB2 Version 2.0 adds a new feature
request. This needs to be added to uapi for monitoring.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260319144715.2957358-2-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds the USB authentication extensions to the
uapi chapter 9 declarations, so that user space tools
correctly operate on the descriptor and commands.
This is necessary for sniffing and debugging in gadget
mode to correctly work, even though the kernel
does not use these requests in host mode.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260319144715.2957358-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to signal that filehandles on this export should be signed, add a
"sign_fh" export option. Filehandle signing can help the server defend
against certain filehandle guessing attacks.
Setting the "sign_fh" export option sets NFSEXP_SIGN_FH. In a future patch
NFSD uses this signal to append a MAC onto filehandles for that export.
While we're in here, tidy a few stray expflags to more closely align to the
export flag order.
Link: https://lore.kernel.org/linux-nfs/cover.1772022373.git.bcodding@hammerspace.com
Signed-off-by: Benjamin Coddington <bcodding@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
A future patch will enable NFSD to sign filehandles by appending a Message
Authentication Code(MAC). To do this, NFSD requires a secret 128-bit key
that can persist across reboots. A persisted key allows the server to
accept filehandles after a restart. Enable NFSD to be configured with this
key via the netlink interface.
Link: https://lore.kernel.org/linux-nfs/cover.1772022373.git.bcodding@hammerspace.com
Signed-off-by: Benjamin Coddington <bcodding@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Hi Dave and Sima,
Here goes our late, final drm-xe-next PR towards 7.1. We just purgeable
BO uAPI in today, hence the late pull.
In the big things we have:
- Add support for purgeable buffer objects
Thanks,
Matt
UAPI Changes:
- Add support for purgeable buffer objects (Arvind, Himal)
Driver Changes:
- Remove useless comment (Maarten)
- Issue GGTT invalidation under lock in ggtt_node_remove (Brost, Fixes)
- Fix mismatched include guards in header files (Shuicheng)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/acX4fWxPkZrrfwnT@gsse-cloud1.jf.intel.com
HUTRR119 introduces new usages for keys intended to invoke AI agents
based on the current context. These are useful with the increasing
number of operating systems with integrated Large Language Models
Add new key definitions for KEY_ACTION_ON_SELECTION,
KEY_CONTEXTUAL_INSERT and KEY_CONTEXTUAL_QUERY
Signed-off-by: Akshai Murari <akshaim@google.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Extend the DRM_XE_MADVISE ioctl to support purgeable buffer object
management by adding DRM_XE_VMA_ATTR_PURGEABLE_STATE attribute type.
This allows userspace applications to provide memory usage hints to
the kernel for better memory management under pressure:
- WILLNEED: Buffer is needed and should not be purged. If the BO was
previously purged, retained field returns 0 indicating backing store
was lost (once purged, always purged semantics matching i915).
- DONTNEED: Buffer is not currently needed and may be purged by the
kernel under memory pressure to free resources. Only applies to
non-shared BOs.
To prevent undefined behavior, the following operations are blocked
while a BO is in DONTNEED state:
- New mmap() operations return -EBUSY
- VM_BIND operations return -EBUSY
- New dma-buf exports return -EBUSY
- CPU page faults return SIGBUS
- GPU page faults fail with -EACCES
This ensures applications cannot use a BO while marked as DONTNEED,
preventing erratic behavior when the kernel purges the backing store.
The implementation includes a 'retained' output field (matching i915's
drm_i915_gem_madvise.retained) that indicates whether the BO's backing
store still exists (1) or has been purged (0).
Added DRM_XE_QUERY_CONFIG_FLAG_HAS_PURGING_SUPPORT flag to allow
userspace to detect kernel support for purgeable buffer objects
before attempting to use the feature.
Cc: Matthew Brost <matthew.brost@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Arvind Yadav <arvind.yadav@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260326130843.3545241-2-arvind.yadav@intel.com
UAPI Changes:
amdxdna:
- support per-BO memory-usage queries
docs:
- Improve UAPI documentation
panthor:
- extend timestamp query with flags
Core Changes:
edid:
- provide enum drm_output_color_format; mass-convert drivers
gem-dma:
- use drm_dev_dma_dev() for DMA mappings
- set VM_DONTDUMP on mmap
mipi-dbi:
- drop simple-display; mass-convert drivers
prime:
- use drm_dev_dma_dev() for DMA mappings
ttm:
- improve handling of gfp_retry_mayfail
Driver Changes:
amdgpu:
- use atomic_create_state for private_obj
amdxdna:
- refactor GEM implementation
- fixes
bridge:
- provide clear-and-put helper for reliable cleanup
- analogix_dp: Use DP helpers for link training
- lontium-lt8713sx: Fix 64-bit division and Kconfig
- samsung-dsim: Use clear-and-put
imagination:
- improve power-off sequence
- support context-reset notification from firmware
komeda:
- support Arm China Linlon D6 plus DT bindings
mediatek:
- use drm_dev_dma_dev() for DMA mappings
panel:
- support Himax HX83121A plus DT bindings
- support JuTouch JT070TM041 plus DT bindings
- support Samsung S6E8FC0 plus DT bindings
- himax-hx83102c: support Samsung S6E8FC0 plus DT bindings; support backlight
- ili9806e: support Rocktech RK050HR345-CT106A plus DT bindings
- simple: support Tianma TM050RDH03 plus DT bindings
panthor:
- support various sources for timestamp queries
- fixes
omapdrm:
- use atomic_create_state for private_obj
rcar-du:
- fix suspend/resume wrt VSP interface
- fix leak of device_link
- clean up
sun4i:
- use drm_dev_dma_dev() for DMA mappings
tegra:
- use atomic_create_state for private_obj
xe:
- send 'none' recovery method for XE_WEDGED_MODE_UPON_ANY_HANG_NO_RESET
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmnFTdMbFIAAAAAABAAO
bWFudTIsMi41KzEuMTIsMiwyAAoJEGgNwR1TC3ojLroIAIXl6jA6VBER5JztfXb7
e0mjOTPDejI2q/WA/s7cUIYsKI26eFiTjWKJlrqtewgwhviNkv3oB9MwHIrMjreB
QP9KMMfwfKFUpP/cXDyqFyMMuXPcdZYft0i38Donjg/l6t5LrZs5nt3or8nbN0H3
4myXUHiCU0N/Zvi4NAKWacfUrEof5JwsxEuCD6USIPkyq8M4M938nmWAElmm6gQu
zl+916jQ9Y7WRyjF2H/2XgBPIEQdvQwlkSCeY4yRbDdHVFCpq2Pepiq8L3c1uoBw
KoCR/92oyM+Q1bbpKFVXGDMgY9xSEvdmqzr5aKqJKT7ouBEUPYxvTlb0jtV/NHqy
7Ak=
=Iwpj
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2026-03-26' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.1:
UAPI Changes:
amdxdna:
- support per-BO memory-usage queries
docs:
- Improve UAPI documentation
panthor:
- extend timestamp query with flags
Core Changes:
edid:
- provide enum drm_output_color_format; mass-convert drivers
gem-dma:
- use drm_dev_dma_dev() for DMA mappings
- set VM_DONTDUMP on mmap
mipi-dbi:
- drop simple-display; mass-convert drivers
prime:
- use drm_dev_dma_dev() for DMA mappings
ttm:
- improve handling of gfp_retry_mayfail
Driver Changes:
amdgpu:
- use atomic_create_state for private_obj
amdxdna:
- refactor GEM implementation
- fixes
bridge:
- provide clear-and-put helper for reliable cleanup
- analogix_dp: Use DP helpers for link training
- lontium-lt8713sx: Fix 64-bit division and Kconfig
- samsung-dsim: Use clear-and-put
imagination:
- improve power-off sequence
- support context-reset notification from firmware
komeda:
- support Arm China Linlon D6 plus DT bindings
mediatek:
- use drm_dev_dma_dev() for DMA mappings
panel:
- support Himax HX83121A plus DT bindings
- support JuTouch JT070TM041 plus DT bindings
- support Samsung S6E8FC0 plus DT bindings
- himax-hx83102c: support Samsung S6E8FC0 plus DT bindings; support backlight
- ili9806e: support Rocktech RK050HR345-CT106A plus DT bindings
- simple: support Tianma TM050RDH03 plus DT bindings
panthor:
- support various sources for timestamp queries
- fixes
omapdrm:
- use atomic_create_state for private_obj
rcar-du:
- fix suspend/resume wrt VSP interface
- fix leak of device_link
- clean up
sun4i:
- use drm_dev_dma_dev() for DMA mappings
tegra:
- use atomic_create_state for private_obj
xe:
- send 'none' recovery method for XE_WEDGED_MODE_UPON_ANY_HANG_NO_RESET
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260326151812.GA76082@linux.fritz.box
Add SEG6_IPTUNNEL_SRC in the uapi for users to configure a specific
tunnel source address. Make seg6_iptunnel handle the new attribute
correctly. It has priority over the configured per-netns tunnel
source address, if any.
Cc: David Ahern <dsahern@kernel.org>
Signed-off-by: Justin Iurman <justin.iurman@6wind.com>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20260324091434.359341-2-justin.iurman@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- cfg80211: new APIs for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
- mt76:
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- iwlwifi: UNII-9 and continuing UHR work
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEpeA8sTs3M8SN2hR410qiO8sPaAAFAmnFTegACgkQ10qiO8sP
aABpghAAmcubFELG/ivDfwujEXjeKRU4CGcFPWDnOwBo28w8bQ36SoKRh251BUSL
4XCEwZwPR2gFI77bJ7fLn1gsRNd8Cv+t8wsi2K3TV3bOy6wCxH85A7l4GmN5vGzP
9MLcAAT7R684YAC4gFAi3DqFmSucd/ZodAt93Cw7+ikXq2tvrbR5wgUv9AQ5mUIw
f5cqocOOv+4IbSL+r2cQnCAKLGWxVMJpoiWuAPpIQn7odcrncrhvBIG3l9ZC4KOL
BKiO+YpK8Yg3+uc9zrz+RwOcQx6TjzgAydFY/AnqOmGfQ2dGaWC/zy/5stCOVrfd
mAqw4jr14eAumUoHQoNrOBsWikuDBKmYMjHVObR3cKB9jJ/54CHtSYJVueg9gdhP
4+s5lNkX0zEt76wimYQRpCkYhalBUZMwUv3HFnab99PDDmWvNFS8uHi8i2g7U81i
yVdxI3MbQp2SRgJMDbKQPziSad1qJyIzg/LoN9fb6GV1DoNZ3IZabgVMOA2IoB0L
zYi3Yuyo63yhDh2Np9uzDsIRQAbTCdbou2fzPqy6CvOyG6JXxCI8PZpZAN7dqYxc
u8rljjaxQ4IYfBWrryFdHzIrYHJLo/B4g8kSFE+vzLiFblFmTxBoziHDWpJ4u5im
YTyOyBYAtzQf0l8cZPKzRq+AuVgIuJVNV/3zyxnoFxfqg/lUWNk=
=zap4
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-03-26' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
A fairly big set of changes all over, notably with:
- cfg80211: new APIs for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
- mt76:
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- iwlwifi: UNII-9 and continuing UHR work
* tag 'wireless-next-2026-03-26' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (230 commits)
wifi: mac80211: ignore reserved bits in reconfiguration status
wifi: cfg80211: allow protected action frame TX for NAN
wifi: ieee80211: Add some missing NAN definitions
wifi: nl80211: Add a notification to notify NAN channel evacuation
wifi: nl80211: add NL80211_CMD_NAN_ULW_UPDATE notification
wifi: nl80211: allow reporting spurious NAN Data frames
wifi: cfg80211: allow ToDS=0/FromDS=0 data frames on NAN data interfaces
wifi: nl80211: define an API for configuring the NAN peer's schedule
wifi: nl80211: add support for NAN stations
wifi: cfg80211: separately store HT, VHT and HE capabilities for NAN
wifi: cfg80211: add support for NAN data interface
wifi: cfg80211: make sure NAN chandefs are valid
wifi: cfg80211: Add an API to configure local NAN schedule
wifi: mac80211: cleanup error path of ieee80211_do_open
wifi: mac80211: extract channel logic from link logic
wifi: iwlwifi: mld: set RX_FLAG_RADIOTAP_TLV_AT_END generically
wifi: iwlwifi: reduce the number of prints upon firmware crash
wifi: iwlwifi: fix the description of SESSION_PROTECTION_CMD
wifi: iwlwifi: mld: introduce iwl_mld_vif_fw_id_valid
wifi: iwlwifi: mld: block EMLSR during TDLS connections
...
====================
Link: https://patch.msgid.link/20260326152021.305959-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
BTF kind layouts provide information to parse BTF kinds. By separating
parsing BTF from using all the information it provides, we allow BTF
to encode new features even if they cannot be used by readers. This
will be helpful in particular for cases where older tools are used
to parse newer BTF with kinds the older tools do not recognize;
the BTF can still be parsed in such cases using kind layout.
The intent is to support encoding of kind layouts optionally so that
tools like pahole can add this information. For each kind, we record
- length of singular element following struct btf_type
- length of each of the btf_vlen() elements following
- a (currently unused) flags field
The ideas here were discussed at [1], [2]; hence
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260326145444.2076244-2-alan.maguire@oracle.com
[1] https://lore.kernel.org/bpf/CAEf4BzYjWHRdNNw4B=eOXOs_ONrDwrgX4bn=Nuc1g8JPFC34MA@mail.gmail.com/
[2] https://lore.kernel.org/bpf/20230531201936.1992188-1-alan.maguire@oracle.com/
Replace manual range and mask validations with netlink policy
annotations in ctnetlink code paths, so that the netlink core rejects
invalid values early and can generate extack errors.
- CTA_PROTOINFO_TCP_STATE: reject values > TCP_CONNTRACK_SYN_SENT2 at
policy level, removing the manual >= TCP_CONNTRACK_MAX check.
- CTA_PROTOINFO_TCP_WSCALE_ORIGINAL/REPLY: reject values > TCP_MAX_WSCALE
(14). The normal TCP option parsing path already clamps to this value,
but the ctnetlink path accepted 0-255, causing undefined behavior when
used as a u32 shift count.
- CTA_FILTER_ORIG_FLAGS/REPLY_FLAGS: use NLA_POLICY_MASK with
CTA_FILTER_F_ALL, removing the manual mask checks.
- CTA_EXPECT_FLAGS: use NLA_POLICY_MASK with NF_CT_EXPECT_MASK, adding
a new mask define grouping all valid expect flags.
Extracted from a broader nf-next patch by Florian Westphal, scoped to
ctnetlink for the fixes tree.
Fixes: c8e2078cfe ("[NETFILTER]: ctnetlink: add support for internal tcp connection tracking flags handling")
Signed-off-by: David Carlier <devnexen@gmail.com>
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add initial declarations for the drm_xe_vm_get_property ioctl.
v2:
- Expand kernel docs for drm_xe_vm_get_property (Jianxun)
v3:
- Remove address type external definitions (Jianxun)
- Add fault type to xe_drm_fault struct (Jianxun)
v4:
- Remove engine class and instance (Ivan)
v5:
- Add declares for fault type, access type, and fault level (Matt Brost,
Ivan)
v6:
- Fix inconsistent use of whitespace in defines
v7:
- Rebase and refactor (jcavitt)
v8:
- Rebase (jcavitt)
v9:
- Clarify address is canonical (José)
v10:
- s/uAPI/Link in the commit log links
Link: https://github.com/intel/compute-runtime/pull/878
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Ivan Briano <ivan.briano@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Cc: Zhang Jianxun <jianxun.zhang@intel.com>
Cc: Ivan Briano <ivan.briano@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260324152935.72444-8-jonathan.cavitt@intel.com
If all available channel resources are used for NAN channels, and one of
them is shared with another interface, and that interface needs to move
to a different channel (for example STA interface that needs to do a
channel or a link switch), then the driver can evacuate one of the NAN
channels (i.e. detach it from its channel resource and announce to the
peers that this channel is ULWed). In that case, the driver needs to
notify user space about the channel evacuation, so the user space can
adjust the local schedule accordingly.
Add a notification to let userspace know about it.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.d5bebfd5ff73.Iaaf5ef17e1ab7a38c19d60558e68fcf517e2b400@changeid
Link: https://patch.msgid.link/20260318123926.206536-11-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add an NL80211 command to configure the NAN schedule of a NAN peer.
Such a schedule contains a list of NAN channels, and a mapping from each
time slots to the corresponding channel (or unscheduled).
Also contains more information about the schedule, such as sequence ID
and map ID.
Not all of the restrictions are validated in this patch. In particular,
comparison of two maps of the same peer requires storing/retrieving each
map of each peer, only for validation.
Therefore, it is the responsibilty of the driver to check that.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.5b13fa5af4f6.If0e214ff5b52c9666e985fefa3f7be0ad14d93fb@changeid
Link: https://patch.msgid.link/20260318123926.206536-7-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are 2 types of logical links with a NAN peer:
- management (NMI), which is used for Tx/Rx of NAN management frames.
- data (NDI), which is used for Tx/Rx of data frames, or non-NAN
management frames.
The NMI station has two roles:
- representation of the NAN peer - for example, the peer's schedule
and the HT, VHT, HE capabilities - belong to the NMI station, and not to
the NDI ones.
- Tx/Rx of NAN management frames to/from the peer.
The NDI station is used for Tx/Rx data frames of a specific NDP that was
established with the NAN peer.
Note that a peer can choose to reuse its NMI address as the NDI address.
In that case, it is expected that two stations will be added even though
they will have the same address.
- An NDI station can only be added after the corresponding NMI station
was configured with capabilities.
- All the NDI stations will be removed before the NDI interface is brought
down.
- All NMI stations will be removed before NAN is stopped.
- Before NMI sta removal, all corresponding NDI stations will be removed
Add support for adding, removing, and changing NMI and NDI stations.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.d280936ee832.I6d859eee759bb5824a9ffd2984410faf879ba00e@changeid
Link: https://patch.msgid.link/20260318123926.206536-6-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In NAN, unlike in other modes, there is only one set of (HT, VHT, HE)
capabilities that is used for all channels (and bands) used in the NAN
data path.
This set of capabilities will have to be a special one, for example - have
the minimum of (HT-for-5 GHz, HT-for-2.4 GHz), careful handling of the
bits that have a different meaning for each band, etc.
While we could use the exiting sband/iftype capabilities, and require
identical capabilities for all bands (makes no sense since this means
that we will have VHT capabilities in the 2.4 GHz slot),
or require that only one of the sbands will be set,
or have logic to extract the minimum and handle the conflicting bits -
it seems simpler to add a dedicated set of capabilities which is special
for NAN, and is band agnostic, to be populated by the driver.
That way we also let the driver decide how it wants to handle the
conflicting bits.
Add this special set of these capabilities to wiphy:nan_capabilities, to be
populated by the driver.
Send it to user space.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.4b6f3e4a81b4.I45422adc0df3ad4101d857a92e83f0de5cf241e1@changeid
Link: https://patch.msgid.link/20260318123926.206536-5-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This new interface type represents a NAN data interface (NDI).
It is used for data communication with NAN peers.
Note that the existing NL80211_IFTYPE_NAN interface, which is the NAN
Management Interface (NMI), is used for management communication.
An NDI interface is started when a new NAN data path is about to
be established, and is stopped after the NAN data path is terminated.
- An NDI interface can only be started if the NMI is running, and NAN is
started.
- Before the NMI is stopped, the NDI interfaces will be stopped.
Add the new interface type, handle add/remove operations for it,
and makes sure of the conditions above.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.0d681335c2e2.I92973483e927820ae2297853c141842fdb262747@changeid
Link: https://patch.msgid.link/20260318123926.206536-4-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add an nl80211 API to allow user space to configure the local NAN
schedule.
The local schedule consists of a list of channel definitions and a schedule
map, in which each element covers a time slot and indicates on what
channel the device should be in that time slot.
Channels can be added to schedule even without being scheduled, for
reservation purposes.
A schedule can be configured either immedietally or be deferred, in case
there are already connected peers.
When the deferred flag is set, the command is a request from the device
to perform an announced schedule update: send the updated NAN
Availability - as set in this command - to the peers, and do the
actual switch to the new schedule on the right time (i.e. at the end of
the slot after the slot in which the update was sent to the peers).
In addition, a notification will be sent to indicate a deferred update
completion.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.ecca178a2de0.Ic977ab08b4ed5cf9b849e55d3a59b01ad3fbd08e@changeid
Link: https://patch.msgid.link/20260318123926.206536-2-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for querying per-process buffer object (BO) memory
usage through the amdxdna GET_ARRAY UAPI.
Introduce a new query type, DRM_AMDXDNA_BO_USAGE, along with
struct amdxdna_drm_bo_usage to report BO memory usage statistics,
including heap, total, and internal usage.
Track BO memory usage on a per-client basis by maintaining counters
in GEM open/close and heap allocation/free paths. This ensures the
reported statistics reflect the current memory footprint of each
process.
Wire the new query into the GET_ARRAY implementation to expose
the usage information to userspace.
Link: 0546f2aaad
Signed-off-by: Max Zhen <max.zhen@amd.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260324163159.2425461-1-lizhi.hou@amd.com
The commit f35dbac694 ("ring-buffer: Fix to update per-subbuf entries of
persistent ring buffer") was a fix and merged upstream. It is needed for
some other work in the ring buffer. The current branch has the remote
buffer code that is shared with the Arm64 subsystem and can't be rebased.
Merge in the upstream commit to allow continuing of the ring buffer work.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This structure definition is used outside the kernel proper.
For example in kmod and the kernel build environment.
To allow reuse, move it to a new UAPI header.
While it is not a true UAPI, it is a common practice to have
non-UAPI interface definitions in the kernel's UAPI headers.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Add a description of struct reader to resolve a kernel-doc warning:
Warning: include/uapi/linux/trace_mmap.h:43 struct member 'reader' not described in 'trace_buffer_meta'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Flags now control which data user space wants to query,
there is more information sources, and there's ability
to query duration of multiple timestamp reads.
New sources:
- CPU's monotonic,
- CPU's monotonic raw,
- GPU's cycle count
These changes should make the implementation of
VK_KHR_calibrated_timestamps more accurate and much simpler.
Signed-off-by: Marcin Slusarz <marcin.slusarz@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260324132557.1707286-1-marcin.slusarz@arm.com
>From hardware implementation perspective, a guest tegra241-cmdqv hardware
is different than the host hardware:
- Host HW is backed by a VINTF (HYP_OWN=1)
- Guest HW is backed by a VINTF (HYP_OWN=0)
The kernel driver has an implementation requirement of the HYP_OWN bit in
the VM. So, VMM must follow that to allow the same copy of Linux to work.
Add this requirement to the uAPI, which is currently missing.
Fixes: 4dc0d12474 ("iommu/tegra241-cmdqv: Add user-space use support")
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
The struct pidfd_info currently exposes in a field called coredump_signal the
signal number (si_signo) that triggered the dump (for example, 11 for SIGSEGV).
However, it is also valuable to understand the reason why that signal was sent.
This additional context is provided by the signal code (si_code), such as 2 for
SEGV_ACCERR.
Add a new field to struct pidfd_info called coredump_code with the value of
si_code for the benefit of sysadmins who pipe core dumps to user-space programs
for later analysis. The following snippet illustrates a simplified C program
that consumes coredump_signal and coredump_code, and then logs core dump
signals and codes to a file:
int pidfd = (int)atoi(argv[1]);
struct pidfd_info info = {
.mask = PIDFD_INFO_EXIT | PIDFD_INFO_COREDUMP,
};
if (ioctl(pidfd, PIDFD_GET_INFO, &info) == 0)
if (info.mask & PIDFD_INFO_COREDUMP)
fprintf(f, "PID=%d, si_signo: %d si_code: %d\n",
info.pid, info.coredump_signal, info.coredump_code);
Assuming the program is installed under /usr/local/bin/core-logger, core dump
processing can be enabled by setting /proc/sys/kernel/core_pattern to
'|/usr/local/bin/dumpstuff %F'.
systemd-coredump(8) already uses pidfds to process core dumps, and it could be
extended to include the values of coredump_code too.
Signed-off-by: Emanuele Rocca <emanuele.rocca@arm.com>
Link: https://patch.msgid.link/acE52HIFivNZN3nE@NH27D9T0LF
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
When set, starting xe3p_lpg, the L2 flush optimization
feature will control whether L2 is in Persistent or
Transient mode through monitoring of media activity.
To enable L2 flush optimization include new feature flag
GUC_CTL_ENABLE_L2FLUSH_OPT for Novalake platforms when
media type is detected.
Tighten UAPI validation to restrict userptr, svm and
dmabuf mappings to be either 2WAY or XA+1WAY
V5(Thomas): logic correction
V4(MattA): Modify uapi doc and commit
V3(MattA): check valid op and pat_index value
V2(MattA): validate dma-buf bos and madvise pat-index
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Acked-by: Carl Zhang <carl.zhang@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260305121902.1892593-9-tejas.upadhyay@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmnAYjkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGUawH/RJlc6oT7epAoDmS
STyZW2CF1U4r8YRFmB2LdmAeydMBbxiQeISN6ap3SkNGURGCZ9WcxjOE4uFhL2WW
aQMTxFaSwj9YxB6x7P9JUn/evJWFh8Fhh48kh2LfXPEpxYQBaMhnGzDSZJ3rtRxi
NMJ/OXqg8JbZS44S2OOC9HxgoYBJ1pNXvi/Q6hWFEJphr3qXaxSvl4go0zMNFEbq
39CK5vbJC8yQo4R/MAjuGvFs+Ivpjypp56iSIpK45z53Dfv255iSzIJhDxM3YGvl
p3nVKpKAPuQMXpOUMOEl6z6muRL50es/Kgi2xh2JK6FWOOOgfunGNWDG/g5mgxjI
QDUAm6U=
=2ECC
-----END PGP SIGNATURE-----
Merge 7.0-rc5 into tty-next
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Repair all kernel-doc warnings in um_timetravel.h:
- add one enum description
- mark "reserve" as private
- use a leading '@' on current_time
Warning: include/uapi/linux/um_timetravel.h:59 Enum value
'UM_TIMETRAVEL_SHARED_MAX_FDS' not described in enum
'um_timetravel_shared_mem_fds'
Warning: include/uapi/linux/um_timetravel.h:245 union member 'reserve'
not described in 'um_timetravel_schedshm_client'
Warning: include/uapi/linux/um_timetravel.h:288 struct member
'current_time' not described in 'um_timetravel_schedshm'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260226221112.1042008-1-rdunlap@infradead.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Refactor amdxdna GEM buffer object (BO) handling to simplify address
management and unify BO type semantics.
Introduce helper APIs to retrieve commonly used BO addresses:
- User virtual address (UVA)
- Kernel virtual address (KVA)
- Device address (IOVA/PA)
These helpers centralize address lookup logic and avoid duplicating
BO-specific handling across submission and execution paths. This also
improves readability and reduces the risk of inconsistent address
handling in future changes.
As part of the refactor:
- Rename SHMEM BO type to SHARE to better reflect its usage.
- Merge CMD BO handling into SHARE, removing special-case logic for
command buffers.
- Consolidate BO type handling paths to reduce code duplication and
simplify maintenance.
No functional change is intended. The refactor prepares the driver for
future enhancements by providing a cleaner abstraction for BO address
management.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260320210615.1973016-1-lizhi.hou@amd.com
As currently defined, initial_bytes is monotonically decreasing and
precedes dirty_bytes when reading from the saving file descriptor.
The transition from initial_bytes to dirty_bytes is unidirectional and
irreversible.
The initial_bytes are considered as critical data that is highly
recommended to be transferred to the target as part of PRE_COPY, without
this data, the PRE_COPY phase would be ineffective.
We come to solve the case when a new chunk of critical data is
introduced during the PRE_COPY phase and the driver would like to report
an entirely new value for the initial_bytes.
For that, we extend the VFIO_MIG_GET_PRECOPY_INFO ioctl with an output
flag named VFIO_PRECOPY_INFO_REINIT to allow drivers reporting a new
initial_bytes value during the PRE_COPY phase.
Currently, existing VFIO_MIG_GET_PRECOPY_INFO implementations don't
assign info.flags before copy_to_user(), this effectively echoes
userspace-provided flags back as output, preventing the field from being
used to report new reliable data from the drivers.
Reliable use of the new VFIO_PRECOPY_INFO_REINIT flag requires userspace
to explicitly opt in by enabling the
VFIO_DEVICE_FEATURE_MIG_PRECOPY_INFOv2 device feature.
When the caller opts in, the driver may report an entirely new
value for initial_bytes. It may be larger, it may be smaller, it may
include the previous unread initial_bytes, it may discard the previous
unread initial_bytes, up to the driver logic and state.
The presence of the VFIO_PRECOPY_INFO_REINIT output flag set by the
driver indicates that new initial data is present on the stream.
Once the caller sees this flag, the initial_bytes value should be
re-evaluated relative to the readiness state for transition to
STOP_COPY.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20260317161753.18964-2-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
The file contains a spelling error in a source comment (succes).
Typos in comments reduce readability and make text searches less reliable
for developers and maintainers.
Replace 'succes' with 'success' in the affected comment. This is a
comment-only cleanup and does not change behavior.
Signed-off-by: Joseph Salisbury <joseph.salisbury@oracle.com>
Link: https://lore.kernel.org/r/20260316185617.166414-1-joseph.salisbury@oracle.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
This is the base GICv5 device which is to be used with the
KVM_CREATE_DEVICE ioctl to create a GICv5-based vgic.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260319154937.3619520-9-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add the bsg_uring_cmd structure to the BSG UAPI header to support
io_uring-based SCSI passthrough operations via IORING_OP_URING_CMD.
Signed-off-by: Yang Xiuwei <yangxiuwei@kylinos.cn>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260317072226.2598233-2-yangxiuwei@kylinos.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- cfg80211/mac80211: S1G and UHR improvements
- hwsim: incumbent signal report test support
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEpeA8sTs3M8SN2hR410qiO8sPaAAFAmm7sb4ACgkQ10qiO8sP
aAD+iQ/+IYWmM1Z/Iu6eZZx/VPrc4Xnj/8UgbalyjetyLRYFNEvawFSdutqZ23uI
FO7vYbzGXMtAlt7fjmxVKMiN4aoX+rISRjG5cnH1qPpeVO8w9fnOZyqmNUFJFboN
ibpr4dqPIS2qZDKegvOa9JO+8KkkPerPWl608eOzXPxoZaZAMnXOhWuV4cWdvuTT
vEnL+Ma4ckkOV6QdBFazYaxAyTt3Mpqj5ULodixtKPMdgB3P+6mAVipp/icE5R1P
R/Vd7Fn+0r7wb/4+1S6DcCBvT6V6Ui94bIRF9DB5LGG/9iLPrGYRD52qQpetzXzA
Si238bs7qi/6t6Q5tfzK1LZVnzZXTUqcWGS6ba4JiMxrLTAK1AEmcLved6A48ywt
YH9zImLRBRMSANbH27BoWvijT5YZGMetH06cTdFmZ8MMGoYV7CWBxVOaIroH7WMx
exMnWEcX6PUVMtlIR4FTGwX/nalGbvnBtoMv9ei3NRb2Dkart8OFT6vIDfy6TBnD
BzAUE3pDAW3I7ukbLQGJ3mmanZpHtF/Xgfr5Y9EbZHPjtC08l7cwdd2zn0n3Q2qu
JGlzZiut6sJTfnRESbUvJ6fnCMdGARpQxq6p2At3njJW0sncvyV9WFKh4A+ReaDr
PQ24fgapG5PNEISevO+/FV1z2qZ0+IbHSmcH+BIoktBnPUBLZFo=
=cLVw
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-03-19' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Aside from various small improvements/cleanups, not much:
- cfg80211/mac80211: S1G and UHR improvements
- hwsim: incumbent signal report test support
* tag 'wireless-next-2026-03-19' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (31 commits)
qtnfmac: use alloc_netdev macro for single queue devices
wifi: libertas: don't kill URBs in interrupt context
wifi: libertas: use USB anchors for tracking in-flight URBs
wifi: nl80211: use int for band coming from netlink
wifi: rsi_91x_usb: do not pause rfkill polling when stopping mac80211
wifi: mac80211: fix STA link removal during link removal
wifi: nl80211: reject S1G/60G with HT chantype
wifi: ieee80211: fix definition of EHT-MCS 15 in MRU
wifi: cfg80211: check non-S1G width with S1G chandef
wifi: cfg80211: restrict cfg80211_chandef_create() to only HT-based bands
wifi: mac80211: don't use cfg80211_chandef_create() for default chandef
wifi: mac80211: Remove deleted sta links in ieee80211_ml_reconf_work()
wifi: b43: use register definitions in nphy_op_software_rfkill
wifi: cfg80211: split control freq check from chandef check
wifi: mac80211: always use full chanctx compatible check
wifi: mac80211: refactor chandef tracing macros
wifi: mac80211: validate HE 6 GHz operation when EHT is used
wifi: nl80211: split out UHR operation information
wifi: mwifiex: drop redundant device reference
wifi: rt2x00: drop redundant device reference
...
====================
Link: https://patch.msgid.link/20260319082439.79875-3-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* use bitops.h API when possible
* send netlink notification in case of client float event
* implement support for asymmetric peer IDs
* consolidate memory allocations during crypto operations
* add netlink notification check in selftests
* add FW mark check in selftest
-----BEGIN PGP SIGNATURE-----
iJEEABYIADkWIQQKU153ubb5unbkl6Gx/ZpNW1HNdwUCabkqjRsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDIACgkQsf2aTVtRzXdlaAEA4fQA41/tbgsciMSf7aqT
lEAbZF/6DnsFZiTmuUfqPvQA/3+R0uiJlUTB3NGhhXXXikP4Yj61lWMDjw//lvYJ
74IG
=elM6
-----END PGP SIGNATURE-----
Merge tag 'ovpn-net-next-20260317' of https://github.com/OpenVPN/ovpn-net-next
Antonio Quartulli says:
====================
Included features:
* use bitops.h API when possible
* send netlink notification in case of client float event
* implement support for asymmetric peer IDs
* consolidate memory allocations during crypto operations
* add netlink notification check in selftests
* add FW mark check in selftest
* tag 'ovpn-net-next-20260317' of https://github.com/OpenVPN/ovpn-net-next:
ovpn: consolidate crypto allocations in one chunk
selftests: ovpn: add test for the FW mark feature
selftests: ovpn: check asymmetric peer-id
ovpn: add support for asymmetric peer IDs
selftests: ovpn: add notification parsing and matching
ovpn: notify userspace on client float event
ovpn: pktid: use bitops.h API
ovpn: use correct array size to parse nested attributes in ovpn_nl_key_swap_doit
selftests: ovpn: allow compiling ovpn-cli.c with mbedtls3
====================
Link: https://patch.msgid.link/20260317104023.192548-1-antonio@openvpn.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add two parameters for drivers supporting Rx CQE coalescing /
descriptor writeback.
ETHTOOL_A_COALESCE_RX_CQE_FRAMES:
Maximum number of frames that can be coalesced into a CQE or
writeback.
ETHTOOL_A_COALESCE_RX_CQE_NSECS:
Max time in nanoseconds after the first packet arrival in a
coalesced CQE or writeback to be sent.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20260317191826.1346111-2-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some display controllers can be hardware programmed to show non-black
colors for pixels that are either not covered by any plane or are
exposed through transparent regions of higher planes. This feature can
help reduce memory bandwidth usage, e.g. in compositors managing a UI
with a solid background color while using smaller planes to render the
remaining content.
To support this capability, introduce the BACKGROUND_COLOR standard DRM
mode property, which can be attached to a CRTC through the
drm_crtc_attach_background_color_property() helper function.
Additionally, define a 64-bit ARGB format value to be built with the
help of a couple of dedicated DRM_ARGB64_PREP*() helpers. Individual
color components can be extracted with desired precision using the
corresponding DRM_ARGB64_GET*() macros.
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260303-rk3588-bgcolor-v8-2-fee377037ad1@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
Currently DIV_ROUND_CLOSEST() is only available for the kernel via
include/linux/math.h.
Expose it to userland as well by adding __KERNEL_DIV_ROUND_CLOSEST() as
a common definition in uapi.
Additionally, ensure it allows building ISO C applications by switching
from the 'typeof' GNU extension to the ISO-friendly __typeof__.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260303-rk3588-bgcolor-v8-1-fee377037ad1@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
If the IOMMU driver reports that ATS is not supported for a device, set
the IOMMU_HW_CAP_PCI_ATS_NOT_SUPPORTED flag in the returned hardware
capabilities.
This uses a negative flag for UAPI compatibility. Existing userspace
assumes ATS is supported if no flag is present. This also ensures that
new userspace works correctly on both old and new kernels, where a
zero value implies ATS support.
When this flag is set, ATS cannot be used for the device. When it is
clear, ATS may be enabled when an appropriate HWPT is attached.
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Shameer Kolothum <skolothumtho@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
In order to support the multipeer architecture, upon connection setup
each side of a tunnel advertises a unique ID that the other side must
include in packets sent to them. Therefore when transmitting a packet, a
peer inserts the recipient's advertised ID for that specific tunnel into
the peer ID field. When receiving a packet, a peer expects to find its
own unique receive ID for that specific tunnel in the peer ID field.
Add support for the TX peer ID and embed it into transmitting packets.
If no TX peer ID is specified, fallback to using the same peer ID both
for RX and TX in order to be compatible with the non-multipeer compliant
peers.
Cc: horms@kernel.org
Cc: donald.hunter@gmail.com
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Send a netlink notification when a client updates its remote UDP
endpoint. The notification includes the new IP address, port, and scope
ID (for IPv6).
Cc: linux-kselftest@vger.kernel.org
Cc: horms@kernel.org
Cc: shuah@kernel.org
Cc: donald.hunter@gmail.com
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
- Correctly handle deeactivation of interrupts that were activated from
LRs. Since EOIcount only denotes deactivation of interrupts that
are not present in an LR, start EOIcount deactivation walk *after*
the last irq that made it into an LR.
- Avoid calling into the stubs to probe for ICH_VTR_EL2.TDS when
pKVM is already enabled -- not only thhis isn't possible (pKVM
will reject the call), but it is also useless: this can only
happen for a CPU that has already booted once, and the capability
will not change.
- Fix a couple of low-severity bugs in our S2 fault handling path,
affecting the recently introduced LS64 handling and the even more
esoteric handling of hwpoison in a nested context
- Address yet another syzkaller finding in the vgic initialisation,
where we would end-up destroying an uninitialised vgic with nasty
consequences
- Address an annoying case of pKVM failing to boot when some of the
memblock regions that the host is faulting in are not page-aligned
- Inject some sanity in the NV stage-2 walker by checking the limits
against the advertised PA size, and correctly report the resulting
faults
PPC:
- Fix a PPC e500 build error due to a long-standing wart that was exposed by
the recent conversion to kmalloc_obj(); rip out all the ugliness that
led to the wart.
RISC-V:
- Prevent speculative out-of-bounds access using array_index_nospec()
in APLIC interrupt handling, ONE_REG regiser access, AIA CSR access,
float register access, and PMU counter access
- Fix potential use-after-free issues in kvm_riscv_gstage_get_leaf(),
kvm_riscv_aia_aplic_has_attr(), and kvm_riscv_aia_imsic_has_attr()
- Fix potential null pointer dereference in kvm_riscv_vcpu_aia_rmw_topei()
- Fix off-by-one array access in SBI PMU
- Skip THP support check during dirty logging
- Fix error code returned for Smstateen and Ssaia ONE_REG interface
- Check host Ssaia extension when creating AIA irqchip
x86:
- Fix cases where CPUID mitigation features were incorrectly marked as
available whenever the kernel used scattered feature words for them.
- Validate _all_ GVAs, rather than just the first GVA, when processing
a range of GVAs for Hyper-V's TLB flush hypercalls.
- Fix a brown paper bug in add_atomic_switch_msr().
- Use hlist_for_each_entry_srcu() when traversing mask_notifier_list,
to fix a lockdep warning; KVM doesn't hold RCU, just irq_srcu.
- Ensure AVIC VMCB fields are initialized if the VM has an in-kernel local
APIC (and AVIC is enabled at the module level).
- Update CR8 write interception when AVIC is (de)activated, to fix a bug
where the guest can run in perpetuity with the CR8 intercept enabled.
- Add a quirk to skip the consistency check on FREEZE_IN_SMM, i.e. to allow
L1 hypervisors to set FREEZE_IN_SMM. This reverts (by default) an
unintentional tightening of userspace ABI in 6.17, and provides some
amount of backwards compatibility with hypervisors who want to freeze
PMCs on VM-Entry.
- Validate the VMCS/VMCB on return to a nested guest from SMM, because
either userspace or the guest could stash invalid values in memory
and trigger the processor's consistency checks.
Generic:
- Remove a subtle pseudo-overlay of kvm_stats_desc, which, aside from being
unnecessary and confusing, triggered compiler warnings due to
-Wflex-array-member-not-at-end.
- Document that vcpu->mutex is take outside of kvm->slots_lock and
kvm->slots_arch_lock, which is intentional and desirable despite being
rather unintuitive.
Selftests:
- Increase the maximum number of NUMA nodes in the guest_memfd selftest to
64 (from 8).
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmmy6n8UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNX7ggAhWoCG+AE6P3yrp6Mi+nRYpeRGC3q
q2IiZCn0UoCg6q3c2kgn7b/N2zLJs0Q8FZRCEp2Je+2uvptpmdp/BMEfiIU3n2/a
61z+Dydbpyc+kUmhJzUJ+aotq5FnMNmAAmqSKoc19GhAx2OQhQmBP/JOZ0P/eqLE
Is0qNBgr/Zms2ib3GFf/JT+urysL2mX47qe92HTzq1T9EEG0KleID0Jz8vYQI8Fr
I5N9+lTxagQDi8ytwOM85Cn8K7wh+CQIgzmciHcVErpAvAWkrEjrPlQltpEz2C5B
aWEcRgw46utEaAiwPQGJRW6TeoKUG0pUR3v6T90nBkjjJ1npm6gPVE6TBA==
=7nQ9
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Quite a large pull request, partly due to skipping last week and
therefore having material from ~all submaintainers in this one. About
a fourth of it is a new selftest, and a couple more changes are large
in number of files touched (fixing a -Wflex-array-member-not-at-end
compiler warning) or lines changed (reformatting of a table in the API
documentation, thanks rST).
But who am I kidding---it's a lot of commits and there are a lot of
bugs being fixed here, some of them on the nastier side like the
RISC-V ones.
ARM:
- Correctly handle deactivation of interrupts that were activated
from LRs. Since EOIcount only denotes deactivation of interrupts
that are not present in an LR, start EOIcount deactivation walk
*after* the last irq that made it into an LR
- Avoid calling into the stubs to probe for ICH_VTR_EL2.TDS when pKVM
is already enabled -- not only thhis isn't possible (pKVM will
reject the call), but it is also useless: this can only happen for
a CPU that has already booted once, and the capability will not
change
- Fix a couple of low-severity bugs in our S2 fault handling path,
affecting the recently introduced LS64 handling and the even more
esoteric handling of hwpoison in a nested context
- Address yet another syzkaller finding in the vgic initialisation,
where we would end-up destroying an uninitialised vgic with nasty
consequences
- Address an annoying case of pKVM failing to boot when some of the
memblock regions that the host is faulting in are not page-aligned
- Inject some sanity in the NV stage-2 walker by checking the limits
against the advertised PA size, and correctly report the resulting
faults
PPC:
- Fix a PPC e500 build error due to a long-standing wart that was
exposed by the recent conversion to kmalloc_obj(); rip out all the
ugliness that led to the wart
RISC-V:
- Prevent speculative out-of-bounds access using array_index_nospec()
in APLIC interrupt handling, ONE_REG regiser access, AIA CSR
access, float register access, and PMU counter access
- Fix potential use-after-free issues in kvm_riscv_gstage_get_leaf(),
kvm_riscv_aia_aplic_has_attr(), and kvm_riscv_aia_imsic_has_attr()
- Fix potential null pointer dereference in
kvm_riscv_vcpu_aia_rmw_topei()
- Fix off-by-one array access in SBI PMU
- Skip THP support check during dirty logging
- Fix error code returned for Smstateen and Ssaia ONE_REG interface
- Check host Ssaia extension when creating AIA irqchip
x86:
- Fix cases where CPUID mitigation features were incorrectly marked
as available whenever the kernel used scattered feature words for
them
- Validate _all_ GVAs, rather than just the first GVA, when
processing a range of GVAs for Hyper-V's TLB flush hypercalls
- Fix a brown paper bug in add_atomic_switch_msr()
- Use hlist_for_each_entry_srcu() when traversing mask_notifier_list,
to fix a lockdep warning; KVM doesn't hold RCU, just irq_srcu
- Ensure AVIC VMCB fields are initialized if the VM has an in-kernel
local APIC (and AVIC is enabled at the module level)
- Update CR8 write interception when AVIC is (de)activated, to fix a
bug where the guest can run in perpetuity with the CR8 intercept
enabled
- Add a quirk to skip the consistency check on FREEZE_IN_SMM, i.e. to
allow L1 hypervisors to set FREEZE_IN_SMM. This reverts (by
default) an unintentional tightening of userspace ABI in 6.17, and
provides some amount of backwards compatibility with hypervisors
who want to freeze PMCs on VM-Entry
- Validate the VMCS/VMCB on return to a nested guest from SMM,
because either userspace or the guest could stash invalid values in
memory and trigger the processor's consistency checks
Generic:
- Remove a subtle pseudo-overlay of kvm_stats_desc, which, aside from
being unnecessary and confusing, triggered compiler warnings due to
-Wflex-array-member-not-at-end
- Document that vcpu->mutex is take outside of kvm->slots_lock and
kvm->slots_arch_lock, which is intentional and desirable despite
being rather unintuitive
Selftests:
- Increase the maximum number of NUMA nodes in the guest_memfd
selftest to 64 (from 8)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits)
KVM: selftests: Verify SEV+ guests can read and write EFER, CR0, CR4, and CR8
Documentation: kvm: fix formatting of the quirks table
KVM: x86: clarify leave_smm() return value
selftests: kvm: add a test that VMX validates controls on RSM
selftests: kvm: extract common functionality out of smm_test.c
KVM: SVM: check validity of VMCB controls when returning from SMM
KVM: VMX: check validity of VMCS controls when returning from SMM
KVM: SVM: Set/clear CR8 write interception when AVIC is (de)activated
KVM: SVM: Initialize AVIC VMCB fields if AVIC is enabled with in-kernel APIC
KVM: x86: Introduce KVM_X86_QUIRK_VMCS12_ALLOW_FREEZE_IN_SMM
KVM: x86: Fix SRCU list traversal in kvm_fire_mask_notifiers()
KVM: VMX: Fix a wrong MSR update in add_atomic_switch_msr()
KVM: x86: hyper-v: Validate all GVAs during PV TLB flush
KVM: x86: synthesize CPUID bits only if CPU capability is set
KVM: PPC: e500: Rip out "struct tlbe_ref"
KVM: PPC: e500: Fix build error due to using kmalloc_obj() with wrong type
KVM: selftests: Increase 'maxnode' for guest_memfd tests
KVM: arm64: pkvm: Don't reprobe for ICH_VTR_EL2.TDS on CPU hotplug
KVM: arm64: vgic: Pick EOIcount deactivations from AP-list tail
KVM: arm64: Remove the redundant ISB in __kvm_at_s1e2()
...
Devlink instances without a backing device use bus_name
"devlink_index" and dev_name set to the decimal index string.
When user space sends this handle, detect the pattern and perform
a direct xarray lookup by index instead of iterating all instances.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260312100407.551173-6-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Each devlink instance has an internally assigned index used for xarray
storage. Expose it as a new DEVLINK_ATTR_INDEX uint attribute alongside
the existing bus_name and dev_name handle.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260312100407.551173-2-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The member is 'data', not 'opaque'.
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
UDP-Lite supports variable-length checksum and has two socket
options, UDPLITE_SEND_CSCOV and UDPLITE_RECV_CSCOV, to control
the checksum coverage.
Let's remove the support.
setsockopt(UDPLITE_SEND_CSCOV / UDPLITE_RECV_CSCOV) was only
available for UDP-Lite and returned -ENOPROTOOPT for UDP.
Now, the options are handled in ip_setsockopt() and
ipv6_setsockopt(), which still return the same error.
getsockopt(UDPLITE_SEND_CSCOV / UDPLITE_RECV_CSCOV) was available
for UDP and always returned 0, meaning full checksum, but now
-ENOPROTOOPT is returned.
Given that getsockopt() is meaningless for UDP and even the options
are not defined under include/uapi/, this should not be a problem.
$ man 7 udplite
...
BUGS
Where glibc support is missing, the following definitions
are needed:
#define IPPROTO_UDPLITE 136
#define UDPLITE_SEND_CSCOV 10
#define UDPLITE_RECV_CSCOV 11
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260311052020.1213705-10-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is kernel-doc warning for DRM_XE_VM_BIND_FLAG_DECOMPRESS:
./include/uapi/drm/xe_drm.h:1060: WARNING: Block quote ends without
a blank line; unexpected unindent.
Fix the warning by adding the missing '%' prefix to
DRM_XE_VM_BIND_FLAG_DECOMPRESS in the kernel-doc list entry for
struct drm_xe_vm_bind_op.
Fixes: 2270bd7124 ("drm/xe: add VM_BIND DECOMPRESS uapi flag")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603121515.gEMrFlTL-lkp@intel.com/
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260312160244.809849-2-nitin.r.gote@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Commit 94dfc73e7c ("treewide: uapi: Replace zero-length arrays with
flexible-array members") broke the userspace API for C++.
These structures ending in VLAs are typically a *header*, which can be
followed by an arbitrary number of entries. Userspace typically creates
a larger structure with some non-zero number of entries, for example in
QEMU's kvm_arch_get_supported_msr_feature():
struct {
struct kvm_msrs info;
struct kvm_msr_entry entries[1];
} msr_data = {};
While that works in C, it fails in C++ with an error like:
flexible array member 'kvm_msrs::entries' not at end of 'struct msr_data'
Fix this by using __DECLARE_FLEX_ARRAY() for the VLA, which uses [0]
for C++ compilation.
Fixes: 94dfc73e7c ("treewide: uapi: Replace zero-length arrays with flexible-array members")
Cc: stable@vger.kernel.org
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://patch.msgid.link/3abaf6aefd6e5efeff3b860ac38421d9dec908db.camel@infradead.org
[sean: tag for stable@]
Signed-off-by: Sean Christopherson <seanjc@google.com>
