* clk-pile: (111 commits)
clk: microchip: mpfs: fix regmap_update_bits() mask/val order
clk: visconti: Make sure clk_init_data is fully initialized
clk: ti: Make sure clk_init_data is fully initialized
MAINTAINERS: Add Brian Masney and Jerome Brunet as co-maintainers for clk subsystem
Drop Michael Turquette's clk maintainer entry
clk: ti: composite: resolve parent clocks by DT index, not by name
clk: ti: mux: resolve parent clocks by DT index, not by name
clk: devres: fix cleanup in devm_clk_get_optional_enabled_with_rate()
dt-bindings: clock: ti,keystone-gate: Convert to DT schema
dt-bindings: clock: ti: Convert APLL clock to DT schema
clk: zynq: pll: Fix kernel-doc after determine_rate() conversion
dt-bindings: clock: ti,clockdomain: Convert to DT schema
dt-bindings: clock: Correct white-space style
clk: tegra: set up proper EMC clock implementation for Tegra114
clk: clocking-wizard: remove 20kHz restriction
clk: clocking-wizard: optimize clock search
clk: clocking-wizard: fix clock difference detection
clk: mediatek: mt8135: Fix inverted gate control for devapc_ck
clk: clocking-wizard: Program PLL CP/RES and lock parameters on reconfig
clk: tegra: support 48MHz clock for pll_p_out1
...
* clk-microchip:
clk: at91: Read "reg" with helper
Here's various improvements and fixes for the clk subsystem that was posted prior
to the opening of the last merge window.
- Add spread spectrum clock (SSC) support to the clk framework, including a new
assigned-clock-sscs devicetree property and clk_hw_set_spread_spectrum()
API with KUnit tests (Peng Fan)
- Add SCMI clock OEM extensions for the i.MX95 clock driver and introduce a
common SCMI clock header (Peng Fan)
- Add clock, reset, and devicetree bindings for the ESWIN EIC7700 HSP clock and
reset generator (Xuyang Dong)
- Add clk_determine_rate_noop() helper for clock drivers that can do any rate,
and convert existing open-coded implementations across hisilicon, imx, qcom,
renesas, rp1, samsung, scpi, sprd, mediatek phy, and mediatek pmdomain
drivers (Brian Masney)
- Add kernel-doc documentation for struct clk_core and the core clock flags,
and wire up clk identifiers into the documentation build (Brian Masney)
- Fix clk_divider_bestdiv() returning the minimum rate instead of the maximum
rate for large rate requests, with KUnit tests (Lad Prabhakar)
- Fix Nuvoton MA35D1 PLL frequency calculation including ignored div_u64
return values, incorrect PLL_CTL1_FRAC bit field width, and broken
determine_rate logic (Joey Lu)
- Support unique clock names for multi-socket Tegra platforms (Jon Hunter)
- Allow COMPILE_TEST builds for HiSilicon clock drivers (Rosen Penev)
- Various fixes and cleanups from Akari Tsuyukusa, Alexander A. Klimov,
Brian Masney, David Carlier, David Laight, Min zhang, Myeonghun Pak,
Pavel Löbl, Randy Dunlap, Rob Herring, Rosen Penev, Uwe Kleine-König,
William Theesfeld, Xuyang Dong, and Yu-Chun Lin
Signed-off-by: Brian Masney <bmasney@redhat.com>
-----BEGIN PGP SIGNATURE-----
iIwEABYKADQWIQSkbTJwWGWqPd7cKQS30t0nXX7AhwUCakLuwRYcbWFzbmV5YkBv
bnN0YXRpb24ub3JnAAoJELfS3SddfsCH1qIA/3OYdBm1fIrd/PumuFj/6xnito0J
nwY64dzlOm4kPVynAQDGDUxQMevRq8AFXh33kOh+cCFg7H9CXjF55ajB2TXaBg==
=1BFM
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=QbCr
-----END PGP SIGNATURE-----
Merge tag 'clk-misc-for-v7.3' of ssh://github.com/masneyb/linux into clk-pile
Pull clk patches picked up by Brian Masney:
Here's various improvements and fixes for the clk subsystem that was posted prior
to the opening of the last merge window.
- Add spread spectrum clock (SSC) support to the clk framework, including a new
assigned-clock-sscs devicetree property and clk_hw_set_spread_spectrum()
API with KUnit tests (Peng Fan)
- Add SCMI clock OEM extensions for the i.MX95 clock driver and introduce a
common SCMI clock header (Peng Fan)
- Add clock, reset, and devicetree bindings for the ESWIN EIC7700 HSP clock and
reset generator (Xuyang Dong)
- Add clk_determine_rate_noop() helper for clock drivers that can do any rate,
and convert existing open-coded implementations across hisilicon, imx, qcom,
renesas, rp1, samsung, scpi, sprd, mediatek phy, and mediatek pmdomain
drivers (Brian Masney)
- Add kernel-doc documentation for struct clk_core and the core clock flags,
and wire up clk identifiers into the documentation build (Brian Masney)
- Fix clk_divider_bestdiv() returning the minimum rate instead of the maximum
rate for large rate requests, with KUnit tests (Lad Prabhakar)
- Fix Nuvoton MA35D1 PLL frequency calculation including ignored div_u64
return values, incorrect PLL_CTL1_FRAC bit field width, and broken
determine_rate logic (Joey Lu)
- Support unique clock names for multi-socket Tegra platforms (Jon Hunter)
- Allow COMPILE_TEST builds for HiSilicon clock drivers (Rosen Penev)
- Various fixes and cleanups from Akari Tsuyukusa, Alexander A. Klimov,
Brian Masney, David Carlier, David Laight, Min zhang, Myeonghun Pak,
Pavel Löbl, Randy Dunlap, Rob Herring, Rosen Penev, Uwe Kleine-König,
William Theesfeld, Xuyang Dong, and Yu-Chun Lin
Signed-off-by: Brian Masney <bmasney@redhat.com>
[sboyd@kernel.org: Fix allmodconfig modpost failure in scmi]
* tag 'clk-misc-for-v7.3' of ssh://github.com/masneyb/linux: (53 commits)
pmdomain: mediatek: mtk-mfg: use clk_determine_rate_noop()
pmdomain: mediatek: airoha: use clk_determine_rate_noop()
phy: mediatek: phy-mtk-hdmi-mt2701: use clk_determine_rate_noop()
clk: sprd: use clk_determine_rate_noop()
clk: scpi: use clk_determine_rate_noop()
clk: samsung: acpm: use clk_determine_rate_noop()
clk: rp1: use clk_determine_rate_noop()
clk: renesas: rzg2l-cpg: use clk_determine_rate_noop()
clk: qcom: smd-rpm: use clk_determine_rate_noop()
clk: qcom: rpmh: use clk_determine_rate_noop()
clk: qcom: rpm: use clk_determine_rate_noop()
clk: imx: scu: use clk_determine_rate_noop()
clk: hisilicon: hi3660-stub: use clk_determine_rate_noop()
clk: add clk_determine_rate_noop()
clk: imx: scu: drop redundant init.ops variable assignment
clk: test: convert constants to use HZ_PER_MHZ
docs: clk: include some identifiers to keep documentation up to date
clk: add kernel docs for struct clk_core
clk: add kernel docs for the core flags
clk: hisilicon: allow COMPILE_TEST builds
...
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Add the clock definitions and PLL logic required to supply the LCDC
(VSPD/FCPVD/DU) blocks on the RZ/T2H (R9A09G077) SoC. The RZ/T2H display
subsystem depends on a dedicated PLL (PLL3) and a set of new derived
clocks.
Introduce a new PLL clock type and implement rate recalculation,
programming and locking sequences for PLL3 using the RZ/T2H specific
divider and VCO limits. Add the corresponding muxes and divider entries,
expose the LCDC core clock, and register the LCDC module clock using the
correct PCLK parent.
This enables the RZ/T2H clock driver to generate the display pipeline
clocking tree needed by the DU and VSP-based composition engines, allowing
upcoming display support to be integrated without duplicating CPG logic.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260618181949.3036280-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Move the RZ/V2H PLL and divider parameter calculation helpers from
rzv2h-cpg.c into a new reusable library.
Introduce the CLK_RZV2H_CPG_LIB Kconfig symbol and add
rzv2h-cpg-lib.c to host the PLL parameter search algorithms currently
implemented by rzv2h_get_pll_pars() and rzv2h_get_pll_divs_pars().
Export the helpers as rzv2h_cpg_get_pll_pars() and
rzv2h_cpg_get_pll_divs_pars() for use by other drivers.
Update the public clock header to expose the new interfaces and provide
compatibility aliases for the existing helper names, avoiding build
breakage for current users while allowing future conversions to the new
API.
This prepares for reuse of the PLL and divider calculation logic by
other Renesas clock drivers, including upcoming RZ/T2H and RZ/N2H CPG
support, without duplicating the implementation.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260618181949.3036280-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Introduce a per-SoC PLL reference input frequency parameter to avoid
relying on a hardcoded 24MHz constant during PLL configuration math.
Add an input_fref member to struct rzv2h_pll_limits. In the core
calculation helper rzv2h_get_pll_pars(), derive the base input clock
rate from limits->input_fref, utilizing the conditional ternary operator
to fall back to 24MHz if the struct field is left uninitialized (0),
and drop the obsolete macro RZ_V2H_OSC_CLK_IN_MEGA.
This abstraction permits the reuse of the common PLL divider logic on
newer SoC platforms like the RZ/T2H, which feature a 48 MHz PLL reference
clock input instead of the 24 MHz signal used by RZ/V2H(P), without
disrupting existing platforms.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260618181949.3036280-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add module clock and reset definitions for the USB2.0 interfaces on the
RZ/G3L (r9a08g046) SoC.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260616104459.410743-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Introduce a dedicated clock delay mechanism, cpg_rzt2h_mstp_delay(), to
satisfy the module-stop (MSTP) state release requirements specified in
the RZ/T2H hardware manual.
Per the hardware manual, while a standard 10 us delay (satisfying 7 dummy
reads) is sufficient for most IP blocks, the LCDC requires 100 dummy reads
(142 us) and the RTC requires 300 dummy reads (428 us) to stabilize after
being released from a module-stop state.
Implement a conditional bitmask filter helper that switches wait
intervals based on the packaged module clock index. In
cpg_mstp_clock_endisable(), the clock index and individual target bits are
known, allowing an exact match. In the resume path cpg_mssr_resume_noirq(),
where individual bits are not tracked, pass a fallback register index base
(`reg * 32`) with bit verification masked out to match on the peripheral's
register group block instead.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260615104845.4122868-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add clock and reset entries for audio-related modules on the RZ/G3E SoC.
Target modules are:
- SSIU (Serial Sound Interface Unit) with SSI ch0-ch9,
- SCU (Sampling Rate Converter Unit) with SRC ch0-ch9, DVC ch0-ch1,
CTU/MIX ch0-ch1,
- DMACpp (Audio DMA Controller),
- ADG (Audio Clock Generator) with divider input clocks and audio
master clock outputs.
The ADG SSI clock outputs (adg_ssi[0-9]_clk) are parented on
CLK_PLLCLN_DIV8 as a deliberate simplification: the ADG dynamically
muxes each output between adg_0_clk_195m and audio_clk[a,b,c] at
runtime via ADG_AUDIO_CLK_SEL{0,1,2}, owned by the rsnd-adg driver.
While at it, reorder plldty_div16 to group it with the other plldty
fixed dividers.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260525110603.4018170-3-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Brian Masney <bmasney@redhat.com>
The linux/pm_domain.h header is not used in this file. Remove it to
keep the includes clean.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260524082657.19335-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Rename the internal loop iterator variable in the for_each_mod_clock()
macro from 'i' to '__i'.
The current naming conflicts with local loop variables named 'i' inside
code blocks that utilize the macro, triggering compiler warnings due to
variable shadowing:
drivers/clk/renesas/rzg2l-cpg.c:1494:36: warning: declaration of `i` shadows a previous local [-Wshadow]
1494 | for (unsigned int i = 0; i < clk->num_shared_mstop_clks; i++)
Using a unique identifier for the macro-internal iterator resolves the
shadowing warnings globally across all macro expansions.
Fixes: 3fd4a8bb4b ("clk: renesas: rzg2l: Add macro to loop through module clocks")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260520092947.70596-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Rename RZG3L_PLL_STBY_OFFSET(), RZG3L_PLL_STBY_RESETB,
RZG3L_PLL_STBY_RESETB_WEN, RZG3L_PLL_MON_OFFSET(), RZG3L_PLL_MON_RESETB,
and RZG3L_PLL_MON_LOCK to their CPG_PLL_* equivalents to reflect that
these macros are not RZG3L-specific and are shared across SoCs.
Also fold CPG_PLL_MON_OFFSET() into rzg2l-cpg.c alongside the other
CPG_PLL_*_OFFSET() helpers introduced in previous patches.
No functional changes.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20260519141518.389670-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Replace the per-SoC G3S_PLL146_CONF() and G3L_PLL1467_CONF() macros with
a unified CPG_PLL_CONF(stby, setting) macro defined in rzg2l-cpg.h.
Drop the now-redundant GET_REG_SAMPLL_{CLK1, SETTING}() macros, replacing
the latter with CPG_PLL1_SETTING_OFFSET() using FIELD_GET() to extract the
offset value. Update RZG3L_PLL_{STBY,MON}_OFFSET() macros to derive
offsets directly from CPG_PLL_STBY_OFFSET().
No functional changes.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260519141518.389670-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Replace the PLL146_CONF() macro and its associated CPG_SAMPLL_CLK{1,2}(n)
helpers with a single CPG_SAM_PLL_CONF(stby) macro that takes the PLL
standby register offset directly.
This removes the implicit coupling between PLL index n and register layout
and eliminates the now-redundant GET_REG_SAMPLL_CLK2() macro. The RZ/V2M
PLL4 definition is also updated to use the new macro with its explicit
standby offset (0x100), removing the local PLL4_CONF define.
No functional changes.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20260519141518.389670-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Implement support for the ZT trace bus and ZTR trace clocks on R-Mobile
APE6.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260502185557.93061-3-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add clock and reset definitions for the three RSPI (Serial Peripheral
Interface) channels on the RZ/G3L (R9A08G046) SoC.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260505071544.8965-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add clock and reset entries for the Serial Communications Interfaces
(RSCI) found on the RZ/G3L SoC. This includes various dividers and mux
clocks needed for the four RSCI channels.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260505071544.8965-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add R9A08G046_IA55_PCLK to the critical module clocks list to prevent
the clock from being gated during suspend, as it is required for the
interrupt controller (IA55) to function correctly.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260430100838.157306-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for the SMUX2_DSI0_CLK and SMUX2_DSI1_CLK clock muxes
present on the r9a09g047 SoC.
These muxes select between CDIV7_DSI{0,1}_CLK and CSDIV_2to16_PLLDSI{0,1}
using the CPG_SSEL3 register (SELCTL0 and SELCTL1 bits).
According to the hardware manual, when LVDS0 or LVDS1 outputs are used,
SELCTL0 or SELCTL1 must be set accordingly.
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/9595f56ce8ab120477bfc11eaafb0f2b655d049a.1775636898.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add the CLK_PLLDSI0_CSDIV and CLK_PLLDSI1_CSDIV fixed-factor clocks to
the r9a09g047 SoC clock driver.
These clocks are required to enable DSI and RGB output support.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/4d5b4ddad89770447b3818381d5353f5065b72b5.1775636898.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add the CLK_PLLDSI0_DIV7 and CLK_PLLDSI1_DIV7 fixed-factor clocks to
the r9a09g047 SoC clock driver.
These clocks are required to enable LVDS0 and LVDS1 output support.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/e50c1721e1dc160e8b4518e8c5172f10cba4b58b.1775636898.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for the PLLDSI{0,1} clocks in the r9a09g047 CPG driver.
Introduce CLK_PLLDSI{0,1} also, introduce the
rzg3e_cpg_pll_dsi{0,1}_limits structures to describe the frequency
constraints specific to the RZ/G3E SoC.
On Renesas RZ/G3E:
- PLLDSI0 maximum output frequency: 1218 MHz
- PLLDSI1 maximum output frequency: 609 MHz
These limits are enforced through the newly added
RZG3E_CPG_PLL_DSI{0,1}_LIMITS().
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/d26ec5349b0eb7ddb7d244fc53d1111a8530328f.1775636898.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add PLLDSI clk mux support to select PLLDSI clock from different clock
sources.
Introduce the DEF_PLLDSI_SMUX() macro to define these muxes and register
them in the clock driver.
Extend the determine_rate callback to calculate and propagate PLL
parameters via rzv2h_get_pll_dtable_pars() when LVDS output is selected,
using a new helper function rzv2h_cpg_plldsi_smux_lvds_determine_rate().
The CLK_SMUX2_DSI{0,1}_CLK clock multiplexers select between two paths
with different duty cycles:
- CDIV7_DSIx_CLK (LVDS path, parent index 0): asymmetric H/L=4/3 duty (4/7)
- CSDIV_DSIx (DSI/RGB path, parent index 1): symmetric 50% duty (1/2)
Implement rzv2h_cpg_plldsi_smux_{get,set}_duty_cycle clock operations to
allow the DRM driver to query and configure the appropriate clock path
based on the required output duty cycle.
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/24d3853ca2522df21e6a071a23e23ba4ca4b7276.1775636898.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Implement support for the ZT trace bus and ZTR trace clocks on R-Mobile
A1.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260422233744.149872-3-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The Renesas RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs have a MTU3
block connected to the PCLKH and with a module clock controlled by
register 0x308, bit 0.
Add support for the module clock.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260410163530.383818-2-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add clock and reset entries for the Gigabit Ethernet Interfaces (GBETH
0-1) IPs found on the RZ/G3L SoC. This includes various dividers and
mux clocks needed by these two GBETH IPs. Also add the tx, tx-180, rx,
rx-180, rmii, rmii-tx and rmii-rx clocks to the r9a08g046_no_pm_mod_clk
table to avoid enabling both normal and RMII clocks by the PM framework.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260326110648.29389-5-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for the PLL6 clk by registering it with rzg2l-cpg driver.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260326110648.29389-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
