The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
dcmipp_bytecap_start_streaming() returned -EINVAL when the source
subdevice could not be resolved from the media graph, before
pm_runtime_resume_and_get() and media_pipeline_start() had been called.
The remaining error paths already converge on the err_buffer_done
label, which calls dcmipp_bytecap_all_buffers_done(...,
VB2_BUF_STATE_QUEUED). Jump to that label directly: the intermediate
err_pm_put / err_media_pipeline_stop labels are skipped, which is
correct because nothing they would undo has happened yet.
This mirrors the uvcvideo fix in commit 4cf3b6fd54 ("media: uvcvideo:
Return queued buffers on start_streaming() failure").
Fixes: 28e0f37722 ("media: stm32-dcmipp: STM32 DCMIPP camera interface driver")
Cc: stable@vger.kernel.org
Signed-off-by: Valery Borovsky <vebohr@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
rtl2832_sdr_start_streaming() had multiple error paths that hit this
trap: two direct early returns (-ENODEV, -ERESTARTSYS), plus six
`goto err` paths covering subdev s_power, tuner setup, ADC setup,
stream-buffer allocation, urb allocation, and urb submission failures.
None of them returned the queued buffers.
The original function had no distinct success exit and fell straight
through into the err label, which previously only did mutex_unlock and
"return ret". Adding queued-buffer cleanup at err must therefore be
paired with an explicit success return; otherwise every successful
start would also drain the buffer queue and kill streaming. Add that
success return, then add rtl2832_sdr_cleanup_queued_bufs() at the err
label and before each early return.
The cleanup helper takes a vb2_buffer_state argument so that the
start_streaming error paths can pass VB2_BUF_STATE_QUEUED (as
expected by userspace on start_streaming failure) while stop_streaming
keeps its existing VB2_BUF_STATE_ERROR semantics.
This mirrors the uvcvideo fix in commit 4cf3b6fd54 ("media: uvcvideo:
Return queued buffers on start_streaming() failure").
The err label still does not roll back power_ctrl(), frontend_ctrl(),
the POWER_ON flag, or stream/URB allocations that may have happened
before the failing step. Those are pre-existing leaks of a different
class and are not addressed here.
Fixes: 771138920e ("[media] rtl2832_sdr: Realtek RTL2832 SDR driver module")
Cc: stable@vger.kernel.org
Signed-off-by: Valery Borovsky <vebohr@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
pwc's start_streaming() had two early returns that hit this trap:
-ENODEV when the USB device was already disconnected, and -ERESTARTSYS
when mutex_lock_interruptible() was interrupted by a signal. Call the
existing pwc_cleanup_queued_bufs() helper with VB2_BUF_STATE_QUEUED
before returning (matching the state already used by the
pwc_isoc_init() error path in the same function).
This mirrors the uvcvideo fix in commit 4cf3b6fd54 ("media: uvcvideo:
Return queued buffers on start_streaming() failure").
Fixes: ceede9fa89 ("[media] pwc: Fix locking")
Cc: stable@vger.kernel.org
Signed-off-by: Valery Borovsky <vebohr@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
msi2500_start_streaming() had five error paths that all hit this trap
and were further tangled by ret-overwriting between calls:
- -ENODEV when the USB device was already disconnected
- -ERESTARTSYS when mutex_lock_interruptible() was interrupted
- msi2500_set_usb_adc() failure: ret was silently overwritten by
the next call (msi2500_isoc_init), so the error was lost entirely
- msi2500_isoc_init() failure: cleanup_queued_bufs was called, but
the function then fell through to msi2500_ctrl_msg() and again
masked the original error by overwriting ret
- msi2500_ctrl_msg(CMD_START_STREAMING) failure: no cleanup at all,
leaving isoc URBs submitted with no way for the driver to consume
them
Consolidate the error paths into a small goto chain. Every failure
now stops the function, drains the queued-buffer list, and returns
the real error code. The ctrl_msg failure path also rolls back the
preceding msi2500_isoc_init() via msi2500_isoc_cleanup() before
unlocking and draining.
The cleanup helper takes a vb2_buffer_state argument so that the
start_streaming error paths can pass VB2_BUF_STATE_QUEUED (as
expected by userspace on start_streaming failure) while stop_streaming
keeps its existing VB2_BUF_STATE_ERROR semantics.
This mirrors the uvcvideo fix in commit 4cf3b6fd54 ("media: uvcvideo:
Return queued buffers on start_streaming() failure").
Fixes: 977e444f59 ("[media] Mirics MSi3101 SDR Dongle driver")
Cc: stable@vger.kernel.org
Signed-off-by: Valery Borovsky <vebohr@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
airspy_start_streaming() returned -ENODEV early when the USB device had
been disconnected (s->udev == NULL) without returning any buffers that
buf_queue() had already accepted. Take v4l2_lock first and jump to the
existing err_clear_bit label, which already drains s->queued_bufs via
vb2_buffer_done(..., VB2_BUF_STATE_QUEUED) before unlocking.
This mirrors the uvcvideo fix in commit 4cf3b6fd54 ("media: uvcvideo:
Return queued buffers on start_streaming() failure").
Fixes: 634fe50339 ("[media] airspy: AirSpy SDR driver")
Cc: stable@vger.kernel.org
Signed-off-by: Valery Borovsky <vebohr@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add myself as co-maintainer of the RZ/V2H(P) IVC block.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Acked-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Queued buffers are added to the tail of vid_cap_active in
buffer_queue(), but the capture kthread also retrieves buffers from
the tail of the list.
This makes the queue behave as LIFO instead of FIFO when multiple
buffers are queued.
Fix this by retrieving buffers from the head of the list.
Signed-off-by: Arash Golgol <arash.golgol@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The driver uses vb2_fop_release() as its file release operation, so
vb2_video_unregister_device() should be used instead of
video_unregister_device() during driver removal.
This ensures that the vb2 queue is properly disconnected before the
video device is unregistered.
Signed-off-by: Arash Golgol <arash.golgol@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
If the driver's stripe information is invalid it can result in an integer
underflow. Add a range check to avoid this kind of error.
This patch fixes the following smatch error:
drivers/staging/media/ipu3/ipu3-css-params.c:1792 imgu_css_cfg_acc_stripe() warn: 'acc->stripe.bds_out_stripes[0]->width - 2 * f' 4294967168 can't fit into 65535 'acc->stripe.bds_out_stripes[1]->offset'
Cc: stable@vger.kernel.org
Fixes: e11110a5b7 ("media: staging/intel-ipu3: css: Compute and program ccs")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
If the driver's dec_output_info contains invalid data the driver can
write in invalid memory. Add a range check for that.
This fixes this smatch error:
drivers/media/platform/chips-media/wave5/wave5-vpuapi.c:588 wave5_vpu_dec_get_output_info() error: buffer overflow 'inst->frame_buf' 64 <= 127
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
If the driver's chip information is invalid we can end up accessing an
invalid memory region.
This fixes the following false positive smatch errors:
drivers/media/i2c/adv7604.c:3672 adv76xx_probe() error: buffer overflow 'state->pads' 7 <= 4294967294
drivers/media/i2c/adv7604.c:3673 adv76xx_probe() error: buffer overflow 'state->pads' 7 <= u32max
Reviewed-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The current code makes smatch a bit uncomfortable:
drivers/media/i2c/mt9p031.c:799 mt9p031_s_ctrl() warn: assigning (-1952) to unsigned variable 'data'
Probably because smatch is not clever enough (yet). Do a simple rewrite
to make sure that smatch understands what we are doing here.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
If the fixed minor ranges are not properly set we could end up in a
situation where the calculated minor is invalid. Add a check for this in
the code to make it more robust.
This check also fixes the following false positive smatch warning:
drivers/media/v4l2-core/v4l2-dev.c:1036 __video_register_device() error: buffer overflow 'video_devices' 256 <= 288
drivers/media/v4l2-core/v4l2-dev.c:1043 __video_register_device() error: buffer overflow 'video_devices' 256 <= 288
drivers/media/v4l2-core/v4l2-dev.c:1101 __video_register_device() error: buffer overflow 'video_devices' 256 <= 288
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
tegra_get_format_fourcc_by_idx() returns a u32 but uses -EINVAL to
signal an out-of-bounds index. This results in a large unsigned
value being returned, which may be interpreted as a valid fourcc.
Returning 0 is not a valid fourcc either. This condition should
never happen, so use WARN_ON_ONCE() to catch unexpected out-of-bounds
access and return a valid fallback format instead.
Suggested-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Fixes: 3d8a97eabe ("media: tegra-video: Add Tegra210 Video input driver")
Cc: stable@vger.kernel.org
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Hungyu Lin <dennylin0707@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Nothing interesting happens in _init and _exit. Just use the macro to
simplify the code slightly.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add an in-tree AVMatrix HWS PCIe capture driver. The driver supports
up to four HDMI inputs and exposes the video capture path through
V4L2 with vb2-dma-contig streaming, DV timings, and per-input
controls. Audio support is intentionally omitted from this
submission.
This patch also adds the MAINTAINERS entry for the new driver.
This driver is derived from a GPL out-of-tree driver.
Changes since v6:
- v6 accidently contained legacy history, resubmitting with latest
- remove an unused mode-change label reported by W=1
Changes since v5:
- keep queue_setup() and alloc_sizeimage on the logical sizeimage value
- drop the dead queue_setup() fallback that rebuilt pix.sizeimage
on the fly
- clarify that hws_calc_sizeimage() models the packed-YUYV-only path
- add Assisted-by attribution for Codex
Changes since v4:
- replace plain 64-bit elapsed-time divisions in debug logging with
div_u64() so i386 module builds do not emit __udivdi3 references
Changes since v3:
- fold the MAINTAINERS update into this patch so per-patch CI sees the
new file pattern
- wrap the validation text for checkpatch
Changes since v2:
- keep scratch DMA allocation on a single probe-owned path
- avoid double-freeing V4L2 control handlers on register unwind
- drop the extra per-node resolution sysfs ABI
- turn live geometry changes into explicit SOURCE_CHANGE renegotiation
- report live DV timings and reject attempts to retime a live source
- stop advertising RESOLUTION source changes for fps-only updates
- keep live fps state across harmless S_FMT restarts
- stop exposing an unvalidated DV RX power-present signal
- clean the imported sources for checkpatch and W=1 builds
Validation:
- build-tested with W=1 against a local kernel build tree
- compiled the driver with ARCH=i386 allmodconfig and verified the
resulting hws_pci.o, hws_video.o, and hws.o do not reference
__udivdi3
- v4l2-compliance 1.33.0-5459 from v4l-utils commit
4a0d2c3b4f523406cb9a6f4c541ef14f72f19f3d on /dev/video2:
48 tests succeeded, 0 failed, 1 warning
DV_RX_POWER_PRESENT is intentionally left unsupported in this revision
because current hardware evidence does not expose a validated
receiver-side power-detect signal distinct from active video presence.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202604020522.z22eZuW8-lkp@intel.com/
Assisted-by: Codex:gpt-5.5
Signed-off-by: Ben Hoff <hoff.benjamin.k@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
In preparation to adding support for several firmware revisions to be
used for a platform, extract the firmware description data. It
incorporates firmware name, HFI ops and buffer requirements of the
particular firmware build.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
[bod: Made struct iris_firmware_desc into static consts to pass media CI]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The linux-firmware is providing the vpuNN_pM.mbn firmware for SM8250
since August of 2024. Stop using the legacy firmware name
(vpu-1.0/venus.mbn) and switch to the standard firmware name schema
(vpu/vpu20_p4.mbn).
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Finalize the logical separation of the software and hardware interface
descriptions by moving hardware properties to the files specific to the
particular VPU version.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Having firmware-related fields in platform data results in the tying
platform data to the HFI firmware data rather than the actual hardware.
For example, SM8450 uses Gen2 firmware, so currently its platform data
should be placed next to the other gen2 platforms, although it has the
VPU2.0 core, similar to the one found on SM8250 and SC7280 and so the
hardware-specific platform data is also close to those devices.
Split firmware data to a separate struct, separating hardware-related
data from the firmware interfaces.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The HW response time is a constant between platforms. Remove it from the
iris_platform_data structure and use it directly.
Suggested-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The get_instance() is a callback tightly connected to the HFI
implementation. Move it into the new iris_hfi_sys_ops structure, merging
all core callbacks into a single vtable.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
There is little point in having two different structures for HFI-related
core ops. Merge both of them into the new iris_hfi_ops structure.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Calling HFI instance-specific ops should not require double indirection
through the core ops. Split instance-specific ops to a separate struct,
keep a pointer to it in struct iris_inst and set it directly in the
get_instance function.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
To note that iris_set_num_comv() is gen2-internal, rename it to
iris_hfi_gen2_set_num_comv() and then stop using hfi_ops indirection to
set session property (like other functions in this file do).
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The set_preset_registers is (currently) common to all supported devices.
Extract it to a iris_vpu_common.c and call it directly from
iris_vpu_power_on(). Later, if any of the devices requires special
handling, it can be sorted out separately.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The PAS ID, the authentication service ID, used by the Iris is a
constant and it is not expected to change anytime. Drop it from the
platform data and use the constant instead.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
With the Iris and Venus driver having more or less feature parity for
"HFI 6xx" platforms and with Iris gaining support for SC7280, flip the
switch. Use Iris by default for SM8250 and SC7280, the platforms which
are supported by both drivers, and use Venus only if Iris is not
compiled at all. Use IS_ENABLED to strip out the code and data
structures which are used by the disabled platforms.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
[bod: Moved two conditional compats inside of one ifdef for ci]
[bod: Changed IS_V6(core) (0) to ((void)(core), 0) for ci]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
As SC7180 is the only remaining user of the non-TZ / non-PAS setup which
uses the video-firmware subnode, move its definition from the common
schema to the SC7180-specific one.
These properties do not accurately describe the hardware. Future
platforms that are going to support non-TZ setup will use different
semantics and different DT ABI (using the iommu-map property).
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The only users of the non-PAS setup on SC7280 platform are the ChromeOS
devices, which were cancelled before reaching end users. Iris, the
alternative driver for the same hardware, does not support non-PAS
setup. It is expected that in future both Venus and Iris devices will
use different ABI for non-PAS (EL2) setup.
In order to declare only the future-proof hardware description drop
support for non-PAS setup from the SC7280 Venus schema (breaking almost
non-existing SC7280 ChromeOS devices).
The dropped iommus entry reflects the extra stream, which should not be
treated in the same way as the main one (which doesn't match the usage
described by the iommus definition).
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
On SM8250 most of the video clocks are powered by the MMCX domain, while
the PLL is powered on by the MX domain. Extend the driver to support
scaling both power domains, while keeping compatibility with the
existing DTs, which define only the MX domain.
Fixes: 0aeabfa29a ("media: venus: core: add sm8250 DT compatible and resource data")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
On SM8250 most of the video clocks are powered by the MMCX domain, while
the PLL is powered on by the MX domain. Extend the driver to support
scaling both power domains, while keeping compatibility with the
existing DTs, which define only the MX domain.
Fixes: 79865252ac ("media: iris: enable video driver probe of SM8250 SoC")
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
First of all, on SM8250 Iris (ex-Venus) core needs to scale clocks which
are powered by the MMCX domain. Add MMCX domain to the list of the power
domain to be used on this platform.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Now as all UBWC configuration bits were migrated to be used or derived
from the global UBWC platform-specific data, drop the unused struct and
field definitions.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The UBWC max_channels spreading is specified in the Iris driver, but it
also can be calculated from the platform UBWC config. Use the platform
UBWC configuration instead of specifying it directly in the source.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The UBWC bank spreading is specified both in the Iris driver and in the
platform UBWC config. Use the platform UBWC configuration instead of
specifying it directly in the source.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The UBWC swizzle is specified both in the Iris driver and in the
platform UBWC config. Use the platform UBWC configuration instead of
specifying it directly in the source.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The highest_bank_bit param is specified both in the Iris driver and in
the platform UBWC config. Use the platform UBWC configuration instead of
specifying it directly in the source.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The min_acc length can be calculated from the platform UBWC
configuration. Use the freshly introduced helper and calculate min_acc
length based on the platform UBWC configuration instead of specifying it
directly in the source.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Specifying UBWC data in each driver doesn't scale and is prone to
errors. Request UBWC data from the central database in preparation to
using it through the rest of the driver.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Fix streaming from CSIDn RDI1 and RDI2 to VFEn RDI1 and RDI2. A pattern we
have replicated throughout CAMSS where we use the VC number to populate
both the VC fields and port fields of the CSID means that in practice only
VC = 0 on CSIDn:RDI0 to VFEn:RDI0 works.
Fix that for CSID gen3 by separating VC and port. Fix to VC zero as a
bugfix we will look to properly populate the VC field with follow on
patches later.
Fixes: d96fe1808d ("media: qcom: camss: Add CSID 780 support")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Fix streaming from CSIDn RDI1 and RDI2 to VFEn RDI1 and RDI2. A pattern we
have replicated throughout CAMSS where we use the VC number to populate
both the VC fields and port fields of the CSID means that in practice only
VC = 0 on CSIDn:RDI0 to VFEn:RDI0 works.
Fix that for CSID gen2 by separating VC and port. Fix to VC zero as a
bugfix we will look to properly populate the VC field with follow on
patches later.
Fixes: 729fc005c8 ("media: qcom: camss: Split testgen, RDI and RX for CSID 170")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Fix streaming from CSIDn RDI1 and RDI2 to VFEn RDI1 and RDI2. A pattern we
have replicated throughout CAMSS where we use the VC number to populate
both the VC fields and port fields of the CSID means that in practice only
VC = 0 on CSIDn:RDI0 to VFEn:RDI0 works.
Fix that for CSID 340 by separating VC and port. Fix to VC zero as a bugfix
we will look to properly populate the VC field with follow on patches
later.
Fixes: f0fc808a46 ("media: qcom: camss: Add CSID 340 support")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Fix streaming to RDI1 and RDI2. csid->phy.en_vc contains a bitmask of
enabled CSID ports not virtual channels.
We cycle through the number of available CSID ports and test this value
against the vc_en bitmask.
We then use the passed value both as an index to the port configuration
macros and as a virtual channel index.
This is a very broken pattern. Reviewing the initial introduction of VC
support it states that you can only map one CSID to one VFE. This is true
however each CSID has multiple sources which can sink inside of the VFE -
for example there is a "pixel" path for bayer stats which sources @
CSID(x):3 and sinks on VFE(x):pix.
That is CSID port # 3 should drive VFE port #3. With our current setup only
a sensor which drives virtual channel number #3 could possibly enable that
setup.
This is deeply wrong the virtual channel has no relevance to hooking CSID
to VFE, a fact that is proven after this patch is applied allowing
RDI0,RDI1 and RDI2 to function with VC0 whereas before only RDI1 worked.
Another way the current model breaks is the DT field. A sensor driving
different data-types on the same VC would not be able to separate the VC:DT
pair to separate RDI outputs, thus breaking another feature of VCs in the
MIPI data-stream.
Default the VC back to zero. A follow on series will implement subdev
streams to actually enable VCs without breaking CSID source to VFE sink.
Fixes: 253314b204 ("media: qcom: camss: Add CSID 680 support")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Split the VFE bytes-per-line (BPL) alignment logic into separate
helpers for RDI and PIX paths. RDI is usually aligned on RDI write
engine bus constraint such as 64-bit or 128-bit. But PIX engine
is usually (at least on platform I looked at) based on pixel format.
On CAMSS_2290, PIX BPL alignment is set to 0 to indicate that the
alignment must be derived from the pixel format. This allows the
pipeline to use camss_format_get_bpl_alignment().
For other platforms, retain the legacy PIX default (16 bytes), until
PIX is properly tested/enabled.
A future improvement would be to remove platform-specific conditionals
from the VFE code and move the alignment requirements into the
per-platform VFE resource data.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
[bod: Fixed straggling newlines]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Bytes-per-line (BPL) alignment in CAMSS currently uses ALIGN(), which
only works correctly for power-of-two values. Some RAW Bayer packing
formats (e.g. RAW10/12/14) require non-power-of-two alignment such as
3, 5, or 7-byte multiples, so ALIGN() produces incorrect results.
Introduce the use of roundup() with the per-format alignment returned by
camss_format_get_bpl_alignment() when no hardware alignment is enforced
(video->bpl_alignment).
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Add camss_format_get_bpl_alignment(), a helper that returns the
bytes-per-line (BPL) alignment requirement for a given CAMSS format.
Different RAW Bayer packing schemes impose different BPL alignment
constraints (e.g. RAW10 requires multiples of 5 bytes, RAW12 multiples of
3 bytes, RAW14 multiples of 7 bytes, etc.). Centralizing this logic
makes the alignment rules explicit and avoids duplicating them across
the pipeline.
This will allow PIX paths and buffer preparation code to correctly
round up BPL values to hardware-required boundaries.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Add a debug trace to video_check_format() to log both the subdev-reported
format and the format requested by the video node. This makes it easier
to diagnose mismatches between subdev output and the negotiated V4L2
pixel format, as well as issues related to plane count, resolution, or
field settings.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
