The Pixel 3a XL has variants with either a Samsung Display Controller (SDC)
panel or a Tianma panel. Add the device tree for the variant with the
Tianma panel.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: "Claude Code Review Bot":claude-opus-4-6
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260513172549.1345-3-mailingradian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Pixel 3a XL can be supported by reusing most of the device tree from
the Pixel 3a. Move the common elements to a common device tree include
like with other devices.
Since the original devicetree should only specify non-XL properties, it
needs to be completely rewritten. Also change the SPDX license
identifier from GPL-2.0 (which was deprecated as it can be
misinterpreted as GPLv2 or later) into GPL-2.0-only.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: "Claude Code Review Bot":claude-opus-4-6
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260513172549.1345-2-mailingradian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the Microchip MCP2518FD CAN-FD controller on hamoa. The controller
is connected via SPI18 and uses a 40 MHz oscillator.
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260515-hamoa-spi-can-devicetree-v2-1-d0e922608065@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Allow mode-switch events to reach the QMP Combo PHY to support
setting the QMP Combo PHY in DP 4Lanes Altmode.
Signed-off-by: Saurabh Anand <saurabh.anand@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260515071448.1845500-1-saurabh.anand@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The path was accidentally reverted back to old while refactoring of the
device-tree.
Fixes: 5bde31dc7b ("arm64: dts: qcom: sdm845-xiaomi-beryllium: Add placeholders and sort")
Signed-off-by: Joel Selvaraj <foss@joelselvaraj.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260429-beryllium-ipa-fix-v1-1-816326ba9047@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QCA2066 Bluetooth chip is powered by a board-level 3.3 V supply
provided by the hardware. This change connects the Bluetooth
controller via UART10, and the corresponding GPIO is used to enable
the Bluetooth chip.
basic function test step:
- bluetoothctl power on/off
- bluetoothctl scan bredr/le
- bluetoothctl pair <remote device address>
- bluetoothctl connect <remote device address>
low-state test and state:
- rtcwake -d /dev/rtc0 -m no -s 30 && systemctl suspend
cat /sys/kernel/debug/suspend_stats
success: 1
fail: 0
failed_freeze: 0
failed_prepare: 0
failed_suspend: 0
failed_suspend_late: 0
failed_suspend_noirq: 0
failed_resume: 0
failed_resume_early: 0
failed_resume_noirq: 0
failures:
last_failed_dev:
last_failed_errno: 0
0
last_failed_step:
Signed-off-by: Shuai Zhang <shuai.zhang@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260429103537.1282497-1-shuai.zhang@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the qfprom efuse node and describe where the GPU speedbin fuse is
located on Milos.
Note that for SM7635-AB at least, the value is "221", the max frequency
for this is 1050MHz. There's another speedbin out there for 1150MHz but
we do not know the value for it so just document in this commit.
Once the value is discovered we should add the speedbins to the A810
Adreno entry and update devicetree.
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260331-milos-qfprom-v1-2-36017cc642db@pm.me
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add CoreSight nodes to enable trace paths like TPDM->ETF/STM->ETF.
These devices are part of the AOSS, CDSP, QDSS, PCIe5, TraceNoc and
some small subsystems, such as GCC, IPCC, PMU and so on.
Delete cti_wpss DT node on Mahua since this device will cause NoC issue
on Mahua device.
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260520-add-coresight-nodes-for-glymur-v6-1-0bfdcdfce3ec@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Downstream kernels for RB3 Gen2 don't specify the RMTFS address, instead
the kernel is supposed to allocate rmtfs buffers dynamically. The
upstream kernel doesn't support dynamic allocation of RMTFS buffers, so
use the fixed allocation. The RMTFS node (and corresponding interface)
is required for the modem DSP to work (which otherwise would crash).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260520-rb3g2-rmtfs-ipa-v1-1-8b3942ded279@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The LeMans EVK board routes the RX lines of CAN controllers 2, 4, and 6
(part of the RTSS subsystem) through a signal multiplexer controlled by
GPIO 4 of the I2C GPIO expander at address 0x3b. The remaining CAN
controllers, out of 8 total on RTSS, are wired directly to their
transceivers.
The multiplexer select pin defaults low on reset, disconnecting CAN 2,
4, and 6 RX lines from their respective transceivers, which results in
no data being received on these interfaces.
Configure GPIO 4 as output-high to assert the mux select line at boot,
connecting the RX signals of CAN 2, 4, and 6 to their transceivers as
required by the EVK board wiring.
Signed-off-by: Anup Kulkarni <anup.kulkarni@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260519064954.2759960-1-anup.kulkarni@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The i2c19 node at 0x88c000 uses GIC SPI 584, but that interrupt
belongs to the neighboring i2c18/spi18 node at 0x888000. The correct
interrupt for i2c19 is GIC SPI 585, as used by its sibling nodes
spi19 and uart19 which share the same register base and clock.
Fixes: 41b6e8db40 ("arm64: dts: qcom: Introduce Glymur base dtsi")
Signed-off-by: Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260518-glymur-fix-i2c19-irq-v1-1-7d5968bd9b2b@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The remoteproc_adsp_glink label on the ADSP glink-edge node has no
users in the upstream tree across all affected SoCs. The only user
of this label is qcs6490-audioreach.dtsi which references the label
defined in its own SoC dtsi and is left untouched.
Remove the label from kaanapali, lemans, monaco, sar2130p, sc8180x,
sc8280xp, sm8450, sm8550, sm8650 and sm8750.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260409181329.556899-1-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The eDP PHY nodes on lemans were missing the reference clock voting.
This initially went unnoticed because the clock was implicitly enabled
by the UFS PHY driver, and the eDP PHY happened to rely on that.
After commit 77d2fa54a9 ("scsi: ufs: qcom : Refactor phy_power_on/off
calls"), the UFS driver no longer keeps the reference clock enabled.
As a result, the eDP PHY fails to power on.
To fix this, add eDP reference clock for eDP PHYs on lemans chipset
ensuring reference clock is enabled.
Fixes: e1e3e5673f ("arm64: dts: qcom: sa8775p: add DisplayPort device nodes")
Signed-off-by: Ritesh Kumar <quic_riteshk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260128114853.2543416-3-quic_riteshk@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Merge the two fixes for ICC blocks in Milos and Eliza through a topic
branch, in order to resolve the introduced DT validation errors in
v7.1-rc while avoiding the merge conflicts against arm64-for-7.2.
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm in-line crypto engine (ICE) platform driver specifies and votes
for its own resources. Before accessing ICE hardware during probe, to
avoid potential unclocked register access issues (when clk_ignore_unused
is not passed on the kernel command line), in addition to the 'core' clock
the 'iface' clock should also be turned on by the driver. This can only be
done if the GCC_UFS_PHY_GDSC power domain is enabled. Specify both the
GCC_UFS_PHY_GDSC power domain and the 'iface' clock in the ICE node for
sm8750.
Fixes: b1dac789c6 ("arm64: dts: qcom: sm8750: Add ICE nodes")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260416-qcom_ice_power_and_clk_vote-v5-11-5ccf5d7e2846@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm in-line crypto engine (ICE) platform driver specifies and votes
for its own resources. Before accessing ICE hardware during probe, to
avoid potential unclocked register access issues (when clk_ignore_unused
is not passed on the kernel command line), in addition to the 'core' clock
the 'iface' clock should also be turned on by the driver. This can only be
done if the UFS_PHY_GDSC power domain is enabled. Specify both the
UFS_PHY_GDSC power domain and the 'iface' clock in the ICE node for sm8650.
Fixes: 10e0246712 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260416-qcom_ice_power_and_clk_vote-v5-10-5ccf5d7e2846@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm in-line crypto engine (ICE) platform driver specifies and votes
for its own resources. Before accessing ICE hardware during probe, to
avoid potential unclocked register access issues (when clk_ignore_unused
is not passed on the kernel command line), in addition to the 'core' clock
the 'iface' clock should also be turned on by the driver. This can only be
done if the UFS_PHY_GDSC power domain is enabled. Specify both the
UFS_PHY_GDSC power domain and the 'iface' clock in the ICE node for sm8550.
Fixes: b8630c48b4 ("arm64: dts: qcom: sm8550: Add the Inline Crypto Engine node")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260416-qcom_ice_power_and_clk_vote-v5-9-5ccf5d7e2846@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm in-line crypto engine (ICE) platform driver specifies and votes
for its own resources. Before accessing ICE hardware during probe, to
avoid potential unclocked register access issues (when clk_ignore_unused
is not passed on the kernel command line), in addition to the 'core' clock
the 'iface' clock should also be turned on by the driver. This can only be
done if the UFS_PHY_GDSC power domain is enabled. Specify both the
UFS_PHY_GDSC power domain and the 'iface' clock in the ICE node for sm8450.
Fixes: 86b0aef435 ("arm64: dts: qcom: sm8450: Use standalone ICE node for UFS")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260416-qcom_ice_power_and_clk_vote-v5-8-5ccf5d7e2846@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm in-line crypto engine (ICE) platform driver specifies and votes
for its own resources. Before accessing ICE hardware during probe, to
avoid potential unclocked register access issues (when clk_ignore_unused
is not passed on the kernel command line), in addition to the 'core' clock
the 'iface' clock should also be turned on by the driver. This can only be
done if the GCC_UFS_PHY_GDSC power domain is enabled. Specify both the
GCC_UFS_PHY_GDSC power domain and the 'iface' clock in the ICE node for
kodiak.
Fixes: dfd5ee7b34 ("arm64: dts: qcom: sc7280: Add inline crypto engine")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Tested-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260416-qcom_ice_power_and_clk_vote-v5-7-5ccf5d7e2846@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm in-line crypto engine (ICE) platform driver specifies and votes
for its own resources. Before accessing ICE hardware during probe, to
avoid potential unclocked register access issues (when clk_ignore_unused
is not passed on the kernel command line), in addition to the 'core' clock
the 'iface' clock should also be turned on by the driver. This can only be
done if the UFS_PHY_GDSC power domain is enabled. Specify both the
UFS_PHY_GDSC power domain and the 'iface' clock in the ICE node for sc7180.
Fixes: 858536d9dc ("arm64: dts: qcom: sc7180: Add UFS nodes")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260416-qcom_ice_power_and_clk_vote-v5-6-5ccf5d7e2846@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm in-line crypto engine (ICE) platform driver specifies and votes
for its own resources. Before accessing ICE hardware during probe, to
avoid potential unclocked register access issues (when clk_ignore_unused
is not passed on the kernel command line), in addition to the 'core' clock
the 'iface' clock should also be turned on by the driver. This can only be
done if the GCC_UFS_PHY_GDSC power domain is enabled. Specify both the
GCC_UFS_PHY_GDSC power domain and the 'iface' clock in the ICE node for
monaco.
Fixes: cc9d29aad8 ("arm64: dts: qcom: qcs8300: enable the inline crypto engine")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260416-qcom_ice_power_and_clk_vote-v5-5-5ccf5d7e2846@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm in-line crypto engine (ICE) platform driver specifies and votes
for its own resources. Before accessing ICE hardware during probe, to
avoid potential unclocked register access issues (when clk_ignore_unused
is not passed on the kernel command line), in addition to the 'core' clock
the 'iface' clock should also be turned on by the driver. This can only be
done if the UFS_PHY_GDSC power domain is enabled. Specify both the
UFS_PHY_GDSC power domain and the 'iface' clock in the ICE node for lemans.
Fixes: 96272ba710 ("arm64: dts: qcom: sa8775p: enable the inline crypto engine")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260416-qcom_ice_power_and_clk_vote-v5-4-5ccf5d7e2846@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm in-line crypto engine (ICE) platform driver specifies and votes
for its own resources. Before accessing ICE hardware during probe, to
avoid potential unclocked register access issues (when clk_ignore_unused
is not passed on the kernel command line), in addition to the 'core' clock
the 'iface' clock should also be turned on by the driver. This can only be
done if the GCC_UFS_PHY_GDSC power domain is enabled. Specify both the
GCC_UFS_PHY_GDSC power domain and the 'iface' clock in the ICE node for
kaanapali.
Fixes: 2eeb5767d5 ("arm64: dts: qcom: Introduce Kaanapali SoC")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260416-qcom_ice_power_and_clk_vote-v5-3-5ccf5d7e2846@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm in-line crypto engine (ICE) platform driver specifies and votes
for its own resources. Before accessing ICE hardware during probe, to
avoid potential unclocked register access issues (when clk_ignore_unused
is not passed on the kernel command line), in addition to the 'core' clock
the 'iface' clock should also be turned on by the driver. This can only be
done if the GCC_UFS_PHY_GDSC power domain is enabled. Specify both the
GCC_UFS_PHY_GDSC power domain and the 'iface' clock in the ICE node for
eliza.
Fixes: af20af39fc ("arm64: dts: qcom: Introduce Eliza Soc base dtsi")
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Fixes: 54a4f0239f ("KVM: MMU: make kvm_mmu_zap_page() return the
Reviewed-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260416-qcom_ice_power_and_clk_vote-v5-13-5ccf5d7e2846@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm in-line crypto engine (ICE) platform driver specifies and votes
for its own resources. Before accessing ICE hardware during probe, to
avoid potential unclocked register access issues (when clk_ignore_unused
is not passed on the kernel command line), in addition to the 'core' clock
the 'iface' clock should also be turned on by the driver. This can only be
done if the UFS_PHY_GDSC power domain is enabled. Specify both the
UFS_PHY_GDSC power domain and the 'iface' clock in the ICE node for milos.
Fixes: 04bb374333 ("arm64: dts: qcom: milos: Add UFS nodes")
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260416-qcom_ice_power_and_clk_vote-v5-12-5ccf5d7e2846@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Update cpusys_vm_mem from 256KiB to 4MiB, cpucp_mem from 2MiB to 1MiB
and fix cpucp_scandump_mem node name to match actual reg address.
This matches the downstream memmap and kera-reserved-memory.dtsi.
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260412-eliza-reserved-memory-fix-v1-1-05cb3e33a9fe@pm.me
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a node for the IMEM found on Eliza, which contains pil-reloc-info
and the modem tables for IPA, among others.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260418-eliza-imem-v3-3-bfbd499b6e77@pm.me
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm DTS uses sorting of MMIO nodes by the unit address, so move
few nodes in Eliza DTSI to fix that.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Link: https://lore.kernel.org/r/20260418-eliza-imem-v3-1-bfbd499b6e77@pm.me
[bjorn: Rebased on top of branch]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Describe the missing Eliza SoC nodes for the QUPv3 WRAP1 and WRAP2 serial
engines, add the matching GPI DMA controllers, the SDHCI controllers and
the LLCC system cache controller.
Also add the TLMM pinctrl states for the QUPv3 serial engines and the
SD card/eMMC interfaces, plus OPP tables for the SDHCI controllers.
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260515-eliza-dts-fix-debug-uart-and-more-support-v2-2-5ad3da81b9d3@oss.qualcomm.com
[bjorn: Temporarily replaced SLAVE_SDCC_1 with the constant]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Eliza MTP debug UART is QUPv3 WRAP2 SE5. The existing DTS labels it
as uart14, but the serial-engine index for this block is actually 13.
Rename the SoC UART label and pinctrl state to uart13 and update the MTP
alias and node reference accordingly.
Fixes: af20af39fc ("arm64: dts: qcom: Introduce Eliza Soc base dtsi")
Fixes: 2a5d4fc6f3 ("arm64: dts: qcom: eliza: Enable Eliza MTP board support")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260515-eliza-dts-fix-debug-uart-and-more-support-v2-1-5ad3da81b9d3@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable display on USB DisplayPort on MTP board with Eliza SoC.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260506-dts-qcom-eliza-display-v3-3-9e46401f467a@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Eliza MTP features a single USB Type-C port. Its USB 2.0 lines are
routed through an eUSB2 repeater provided by the PM7550BA PMIC.
Describe the port and repeater, and enable the USB controller and PHYs.
Also specify the ADSP firmware and enable the remoteproc.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260514-eliza-adsp-usb-v5-3-a21056ffd892@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On Eliza, the SPMI arbiter supports multiple bus masters, requiring
explicit selection of the master for each PMIC.
The existing PM7550BA dtsi does not provide a way to describe this,
so introduce an Eliza-specific variant with the appropriate bus
configuration.
This duplication is required due to hardware differences in how the
SPMI bus is exposed on this platform.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260514-eliza-adsp-usb-v5-2-a21056ffd892@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Describe the ADSP remoteproc node along with its dependencies, including
the IPCC mailbox, AOSS QMP and SMP2P links used for communication.
The Eliza SoC features a USB 3.1 Gen 2 controller connected to a QMP
combo PHY and an SNPS eUSB2 PHY. Describe them.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260514-eliza-adsp-usb-v5-1-a21056ffd892@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The onboard WiFi / BT device, WCN3990, has a simple on-chip PMU, which
further spreads generated voltage. Describe the PMU in the device tree.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260415-axolotl-wifi-v1-1-07df39cfc0a4@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Snapdragon 670 has a separate TLMM for audio pins. Add the device
node for it.
Also add reserved GPIOs for the Pixel 3a, which blocks access to the
sensor GPIOs.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Acked-by: Linus Walleij <linusw@kernel.org>
Link: https://lore.kernel.org/r/20260331200658.1306-5-mailingradian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The ICE register region size was originally described incorrectly when
the ICE hardware was first introduced. The same value was later carried
over unchanged when the ICE node was split out from the UFS node into
its own DT entry.
Correct the register size to match the hardware specification.
Fixes: 276ee34a40 ("arm64: dts: qcom: sm8450: add Inline Crypto Engine registers and clock")
Signed-off-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Reviewed-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260402-ice_dt_reg_fix-v1-2-74e4c2129238@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The ICE register region on Kodiak is currently defined as 0x8000 bytes.
According to the hardware specification, the correct register size is
0x18000.
Update the ICE node reg property to match the hardware.
Fixes: dfd5ee7b34 ("arm64: dts: qcom: sc7280: Add inline crypto engine")
Signed-off-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Reviewed-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260402-ice_dt_reg_fix-v1-1-74e4c2129238@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The DSI PHY CXO clock input is the SoC CXO divided by two. DSI0 already
uses correct one, but DSI1 got copy-paste from SM8650. Wrong clock
parent will cause incorrect DSI1 PHY PLL frequencies to be used making
the DSI panel non-working, although there is no upstream user of DSI1.
Fixes: 818ae2b389 ("arm64: dts: qcom: sm8750: Add display (MDSS) with Display CC")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260331165645.233965-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the OPP tables for each CPU clusters (cpu0-1-2, cpu3-4-5-6 & cpu7)
to permit scaling the Last Level Cache Controller (LLCC), DDR and L3 cache
frequency by aggregating bandwidth requests of all CPU core with referenc
to the current OPP they are configured in by the LMH/EPSS hardware.
The effect is a proper caches & DDR frequency scaling when CPU cores
changes frequency.
The OPP tables were built using the downstream memlat ddr, llcc & l3
tables for each cluster types with the actual EPSS cpufreq LUT tables
from running a QCS8550 device.
Also add the OSC L3 Cache controller node.
Also add the interconnect entry for each cpu, with 3 different paths:
- CPU to Last Level Cache Controller (LLCC)
- Last Level Cache Controller (LLCC) to DDR
- L3 Cache from CPU to DDR interface
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://lore.kernel.org/r/20260330-sm8550-ddr-bw-scaling-v4-1-5020c06983a0@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The camera clock controller is split into cambistmclk and camcc. The
cambist clock controller handles the mclks and the rest of the clocks of
camera are part of the camcc clock controller.
Add the camcc clock controller device node for SM8750 SoC.
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260511-sm8750_camcc_dt-v4-1-eab4b6c3eaea@oss.qualcomm.com
[bjorn: Fixed include file order]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable ADSP and CDSP on Glymur CRD board.
Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260313120814.1312410-6-sibi.sankar@oss.qualcomm.com
[bjorn: Moved snippet to common glymur-crd.dtsi]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
