mirror of
https://github.com/torvalds/linux.git
synced 2026-07-31 03:27:03 +02:00
arm64: dts: qcom: sdm670-google: add common device tree include
The Pixel 3a XL can be supported by reusing most of the device tree from the Pixel 3a. Move the common elements to a common device tree include like with other devices. Since the original devicetree should only specify non-XL properties, it needs to be completely rewritten. Also change the SPDX license identifier from GPL-2.0 (which was deprecated as it can be misinterpreted as GPLv2 or later) into GPL-2.0-only. Signed-off-by: Richard Acayan <mailingradian@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Assisted-by: "Claude Code Review Bot":claude-opus-4-6 Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20260513172549.1345-2-mailingradian@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This commit is contained in:
Richard Acayan
Bjorn Andersson
parent
181bef7399
commit
fe9f4a4689
712
arch/arm64/boot/dts/qcom/sdm670-google-common.dtsi
Normal file
712
arch/arm64/boot/dts/qcom/sdm670-google-common.dtsi
Normal file
|
|
@ -0,0 +1,712 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device tree for Google Pixel 3a, adapted from google-blueline device tree,
|
||||
* xiaomi-lavender device tree, and oneplus-common device tree.
|
||||
*
|
||||
* Copyright (c) 2022, Richard Acayan. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
||||
#include <dt-bindings/power/qcom-rpmpd.h>
|
||||
#include "sdm670.dtsi"
|
||||
#include "pm660.dtsi"
|
||||
#include "pm660l.dtsi"
|
||||
|
||||
/delete-node/ &mpss_region;
|
||||
/delete-node/ &venus_mem;
|
||||
/delete-node/ &wlan_msa_mem;
|
||||
/delete-node/ &cdsp_mem;
|
||||
/delete-node/ &mba_region;
|
||||
/delete-node/ &adsp_mem;
|
||||
/delete-node/ &ipa_fw_mem;
|
||||
/delete-node/ &ipa_gsi_mem;
|
||||
/delete-node/ &gpu_mem;
|
||||
|
||||
/ {
|
||||
aliases { };
|
||||
|
||||
battery: battery {
|
||||
compatible = "simple-battery";
|
||||
|
||||
voltage-min-design-microvolt = <3312000>;
|
||||
voltage-max-design-microvolt = <4400000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
framebuffer: framebuffer@9c000000 {
|
||||
compatible = "simple-framebuffer";
|
||||
memory-region = <&fb_mem>;
|
||||
width = <1080>;
|
||||
/* height is in specific device trees */
|
||||
stride = <(1080 * 4)>;
|
||||
format = "a8r8g8b8";
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
autorepeat;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vol_up_pin>;
|
||||
|
||||
key-vol-up {
|
||||
label = "Volume Up";
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
mpss_region: mpss@8b000000 {
|
||||
reg = <0 0x8b000000 0 0x9800000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
venus_mem: venus@94800000 {
|
||||
reg = <0 0x94800000 0 0x500000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
wlan_msa_mem: wlan-msa@94d00000 {
|
||||
reg = <0 0x94d00000 0 0x100000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
cdsp_mem: cdsp@94e00000 {
|
||||
reg = <0 0x94e00000 0 0x800000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
mba_region: mba@95600000 {
|
||||
reg = <0 0x95600000 0 0x200000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
adsp_mem: adsp@95800000 {
|
||||
reg = <0 0x95800000 0 0x2200000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
ipa_fw_mem: ipa-fw@97a00000 {
|
||||
reg = <0 0x97a00000 0 0x10000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
ipa_gsi_mem: ipa-gsi@97a10000 {
|
||||
reg = <0 0x97a10000 0 0x5000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
gpu_mem: gpu@97a15000 {
|
||||
reg = <0 0x97a15000 0 0x2000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
fb_mem: framebuffer-region@9c000000 {
|
||||
reg = <0 0x9c000000 0 0x2400000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
/* Also includes ramoops regions */
|
||||
debug_info_mem: debug-info@a1800000 {
|
||||
reg = <0 0xa1800000 0 0x411000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* The touchscreen regulator seems to be controlled somehow by a gpio.
|
||||
* Model it as a fixed regulator and keep it on. Without schematics we
|
||||
* don't know how this is actually wired up...
|
||||
*/
|
||||
ts_1p8_supply: ts-1p8-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "ts_1p8_supply";
|
||||
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
gpio = <&pm660_gpios 12 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vph_pwr: vph-pwr-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vph_pwr";
|
||||
regulator-min-microvolt = <3312000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
/*
|
||||
* Supply map from xiaomi-lavender specifies this as the supply for
|
||||
* ldob1, ldob9, ldob10, ldoa2, and ldoa3, while downstream specifies
|
||||
* this as a power domain. Set this as a fixed regulator with the same
|
||||
* voltage as lavender until display is needed to avoid unneccessarily
|
||||
* using a deprecated binding (regulator-fixed-domain).
|
||||
*/
|
||||
vreg_s2b_1p05: vreg-s2b-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vreg_s2b";
|
||||
regulator-min-microvolt = <1050000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
};
|
||||
|
||||
cam_front_ldo: cam-front-ldo-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "cam_front_ldo";
|
||||
regulator-min-microvolt = <1352000>;
|
||||
regulator-max-microvolt = <1352000>;
|
||||
regulator-enable-ramp-delay = <135>;
|
||||
|
||||
gpios = <&pm660l_gpios 4 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-0 = <&cam_front_ldo_pin>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
cam_vio_ldo: cam-vio-ldo-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "cam_vio_ldo";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-enable-ramp-delay = <233>;
|
||||
|
||||
gpios = <&pm660_gpios 13 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-0 = <&cam_vio_pin>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
&apps_rsc {
|
||||
regulators-0 {
|
||||
compatible = "qcom,pm660-rpmh-regulators";
|
||||
qcom,pmic-id = "a";
|
||||
|
||||
vdd-s1-supply = <&vph_pwr>;
|
||||
vdd-s2-supply = <&vph_pwr>;
|
||||
vdd-s3-supply = <&vph_pwr>;
|
||||
vdd-s4-supply = <&vph_pwr>;
|
||||
vdd-s5-supply = <&vph_pwr>;
|
||||
vdd-s6-supply = <&vph_pwr>;
|
||||
|
||||
vdd-l1-l6-l7-supply = <&vreg_s6a_0p87>;
|
||||
vdd-l2-l3-supply = <&vreg_s2b_1p05>;
|
||||
vdd-l5-supply = <&vreg_s2b_1p05>;
|
||||
vdd-l8-l9-l10-l11-l12-l13-l14-supply = <&vreg_s4a_2p04>;
|
||||
vdd-l15-l16-l17-l18-l19-supply = <&vreg_bob>;
|
||||
|
||||
/*
|
||||
* S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed
|
||||
* by the Core Power Reduction hardened (CPRh) and the
|
||||
* Operating State Manager (OSM) HW automatically.
|
||||
*/
|
||||
|
||||
vreg_s4a_2p04: smps4 {
|
||||
regulator-min-microvolt = <1808000>;
|
||||
regulator-max-microvolt = <2040000>;
|
||||
regulator-enable-ramp-delay = <200>;
|
||||
};
|
||||
|
||||
vreg_s6a_0p87: smps6 {
|
||||
regulator-min-microvolt = <1224000>;
|
||||
regulator-max-microvolt = <1352000>;
|
||||
regulator-enable-ramp-delay = <150>;
|
||||
};
|
||||
|
||||
/* LDOs */
|
||||
vreg_l1a_1p225: ldo1 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l2a_1p0: ldo2 {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l3a_1p0: ldo3 {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l5a_0p848: ldo5 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <800000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l6a_1p3: ldo6 {
|
||||
regulator-min-microvolt = <1248000>;
|
||||
regulator-max-microvolt = <1304000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l7a_1p2: ldo7 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l8a_1p8: ldo8 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vreg_l9a_1p8: ldo9 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l10a_1p8: ldo10 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l11a_1p8: ldo11 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l12a_1p8: ldo12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l13a_1p8: ldo13 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l14a_1p8: ldo14 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l15a_1p8: ldo15 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l16a_2p7: ldo16 {
|
||||
regulator-min-microvolt = <2696000>;
|
||||
regulator-max-microvolt = <2696000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l17a_1p8: ldo17 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l19a_3p3: ldo19 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-1 {
|
||||
compatible = "qcom,pm660l-rpmh-regulators";
|
||||
qcom,pmic-id = "b";
|
||||
|
||||
vdd-s1-supply = <&vph_pwr>;
|
||||
vdd-s2-supply = <&vph_pwr>;
|
||||
vdd-s3-s4-supply = <&vph_pwr>;
|
||||
vdd-s5-supply = <&vph_pwr>;
|
||||
|
||||
vdd-l1-l9-l10-supply = <&vreg_s2b_1p05>;
|
||||
vdd-l2-supply = <&vreg_bob>;
|
||||
vdd-l3-l5-l7-l8-supply = <&vreg_bob>;
|
||||
vdd-l4-l6-supply = <&vreg_bob>;
|
||||
vdd-bob-supply = <&vph_pwr>;
|
||||
|
||||
/* LDOs */
|
||||
vreg_l1b_0p925: ldo1 {
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l2b_2p95: ldo2 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l3b_3p0: ldo3 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <3008000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l4b_2p95: ldo4 {
|
||||
regulator-min-microvolt = <2960000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l5b_2p95: ldo5 {
|
||||
regulator-min-microvolt = <2960000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l6b_3p3: ldo6 {
|
||||
regulator-min-microvolt = <3008000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l7b_3p125: ldo7 {
|
||||
regulator-min-microvolt = <3088000>;
|
||||
regulator-max-microvolt = <3100000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l8b_3p3: ldo8 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
/*
|
||||
* Downstream specifies a fixed voltage of 3.312 V, but the
|
||||
* PMIC4 BOB ranges don't support that. Widen the range a
|
||||
* little to avoid adding a new BOB regulator type.
|
||||
*/
|
||||
vreg_bob: bob {
|
||||
regulator-min-microvolt = <3296000>;
|
||||
regulator-max-microvolt = <3328000>;
|
||||
regulator-enable-ramp-delay = <500>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&camss {
|
||||
vdda-phy-supply = <&vreg_l1a_1p225>;
|
||||
vdda-pll-supply = <&vreg_s6a_0p87>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&camss_port1 {
|
||||
camss_endpoint1: endpoint {
|
||||
data-lanes = <0 1 2 3>;
|
||||
remote-endpoint = <&cam_front_endpoint>;
|
||||
};
|
||||
};
|
||||
|
||||
&cci {
|
||||
pinctrl-0 = <&cci1_default>;
|
||||
pinctrl-1 = <&cci1_sleep>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cci_i2c1 {
|
||||
camera@1a {
|
||||
compatible = "sony,imx355";
|
||||
reg = <0x1a>;
|
||||
|
||||
clocks = <&camcc CAM_CC_MCLK2_CLK>;
|
||||
|
||||
/*
|
||||
* The sensor can accept a 24 MHz clock, but 19.2 MHz has
|
||||
* better driver compatibility.
|
||||
*/
|
||||
assigned-clocks = <&camcc CAM_CC_MCLK2_CLK>;
|
||||
assigned-clock-rates = <19200000>;
|
||||
|
||||
reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
|
||||
|
||||
avdd-supply = <&cam_front_ldo>;
|
||||
dvdd-supply = <&cam_front_ldo>;
|
||||
dovdd-supply = <&cam_vio_ldo>;
|
||||
|
||||
pinctrl-0 = <&cam_mclk2_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
rotation = <270>;
|
||||
orientation = <0>;
|
||||
|
||||
port {
|
||||
cam_front_endpoint: endpoint {
|
||||
data-lanes = <1 2 3 4>;
|
||||
link-frequencies = /bits/ 64 <360000000>;
|
||||
remote-endpoint = <&camss_endpoint1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gcc {
|
||||
protected-clocks = <GCC_QSPI_CORE_CLK>,
|
||||
<GCC_QSPI_CORE_CLK_SRC>,
|
||||
<GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
|
||||
};
|
||||
|
||||
&gpi_dma1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu_zap_shader {
|
||||
firmware-name = "qcom/sdm670/sargo/a615_zap.mbn";
|
||||
};
|
||||
|
||||
&i2c9 {
|
||||
clock-frequency = <100000>;
|
||||
status = "okay";
|
||||
|
||||
synaptics-rmi4-i2c@20 {
|
||||
compatible = "syna,rmi4-i2c";
|
||||
reg = <0x20>;
|
||||
interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&touchscreen_default>;
|
||||
|
||||
vio-supply = <&ts_1p8_supply>;
|
||||
|
||||
syna,reset-delay-ms = <200>;
|
||||
syna,startup-delay-ms = <200>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
rmi4-f01@1 {
|
||||
reg = <0x01>;
|
||||
syna,nosleep-mode = <1>;
|
||||
};
|
||||
|
||||
rmi4_f12: rmi4-f12@12 {
|
||||
reg = <0x12>;
|
||||
syna,sensor-type = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdss {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdss_dsi0 {
|
||||
vdda-supply = <&vreg_l1a_1p225>;
|
||||
status = "okay";
|
||||
|
||||
panel: panel@0 {
|
||||
/* compatible is provided in specific device trees */
|
||||
reg = <0>;
|
||||
|
||||
reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&panel_default>;
|
||||
|
||||
power-supply = <&vreg_l6b_3p3>;
|
||||
|
||||
port {
|
||||
panel_in: endpoint {
|
||||
remote-endpoint = <&mdss_dsi0_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdss_dsi0_out {
|
||||
remote-endpoint = <&panel_in>;
|
||||
data-lanes = <0 1 2 3>;
|
||||
};
|
||||
|
||||
&mdss_dsi0_phy {
|
||||
vdds-supply = <&vreg_l1b_0p925>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdss_mdp {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pm660_charger {
|
||||
monitored-battery = <&battery>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pm660_gpios {
|
||||
cam_vio_pin: cam-vio-state {
|
||||
pins = "gpio13";
|
||||
function = "normal";
|
||||
power-source = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm660_rradc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pm660l_flash {
|
||||
status = "okay";
|
||||
|
||||
led-0 {
|
||||
function = LED_FUNCTION_FLASH;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
led-sources = <1>, <2>;
|
||||
led-max-microamp = <500000>;
|
||||
flash-max-microamp = <1500000>;
|
||||
flash-max-timeout-us = <1280000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm660l_gpios {
|
||||
cam_front_ldo_pin: cam-front-state {
|
||||
pins = "gpio4";
|
||||
function = "normal";
|
||||
power-source = <0>;
|
||||
};
|
||||
|
||||
vol_up_pin: vol-up-state {
|
||||
pins = "gpio7";
|
||||
function = "normal";
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||||
input-enable;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
&pon_pwrkey {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pon_resin {
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_id_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhc_1 {
|
||||
supports-cqe;
|
||||
mmc-hs200-1_8v;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-ddr-1_8v;
|
||||
|
||||
qcom,ddr-config = <0xc3040873>;
|
||||
|
||||
vmmc-supply = <&vreg_l4b_2p95>;
|
||||
vqmmc-supply = <&vreg_l8a_1p8>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio-reserved-ranges = <0 4>, <81 4>;
|
||||
|
||||
panel_default: panel-default-state {
|
||||
te-pins {
|
||||
pins = "gpio10";
|
||||
function = "mdp_vsync";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
reset-pins {
|
||||
pins = "gpio75";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
mode-pins {
|
||||
pins = "gpio76";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
touchscreen_default: ts-default-state {
|
||||
ts-reset-pins {
|
||||
pins = "gpio99";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
output-high;
|
||||
};
|
||||
|
||||
ts-irq-pins {
|
||||
pins = "gpio125";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
ts-switch-pins {
|
||||
pins = "gpio135";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb_1_hsphy {
|
||||
vdd-supply = <&vreg_l1b_0p925>;
|
||||
vdda-pll-supply = <&vreg_l10a_1p8>;
|
||||
vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1 {
|
||||
qcom,select-utmi-as-pipe-clk;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_dwc3 {
|
||||
/* Only peripheral works for now */
|
||||
dr_mode = "peripheral";
|
||||
|
||||
/* Do not assume that sdm670.dtsi will never support USB 3.0 */
|
||||
phys = <&usb_1_hsphy>;
|
||||
phy-names = "usb2-phy";
|
||||
maximum-speed = "high-speed";
|
||||
};
|
||||
|
|
@ -1,720 +1,32 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* Device tree for Google Pixel 3a, adapted from google-blueline device tree,
|
||||
* xiaomi-lavender device tree, and oneplus-common device tree.
|
||||
* Device tree for Google Pixel 3a (non-XL).
|
||||
*
|
||||
* Copyright (c) 2022, Richard Acayan. All rights reserved.
|
||||
* Copyright (c) Richard Acayan. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
||||
#include <dt-bindings/power/qcom-rpmpd.h>
|
||||
#include "sdm670.dtsi"
|
||||
#include "pm660.dtsi"
|
||||
#include "pm660l.dtsi"
|
||||
|
||||
/delete-node/ &mpss_region;
|
||||
/delete-node/ &venus_mem;
|
||||
/delete-node/ &wlan_msa_mem;
|
||||
/delete-node/ &cdsp_mem;
|
||||
/delete-node/ &mba_region;
|
||||
/delete-node/ &adsp_mem;
|
||||
/delete-node/ &ipa_fw_mem;
|
||||
/delete-node/ &ipa_gsi_mem;
|
||||
/delete-node/ &gpu_mem;
|
||||
#include "sdm670-google-common.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Google Pixel 3a";
|
||||
compatible = "google,sargo", "qcom,sdm670";
|
||||
|
||||
aliases { };
|
||||
|
||||
battery: battery {
|
||||
compatible = "simple-battery";
|
||||
|
||||
voltage-min-design-microvolt = <3312000>;
|
||||
voltage-max-design-microvolt = <4400000>;
|
||||
charge-full-design-microamp-hours = <3000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
framebuffer@9c000000 {
|
||||
compatible = "simple-framebuffer";
|
||||
reg = <0 0x9c000000 0 (1080 * 2220 * 4)>;
|
||||
width = <1080>;
|
||||
height = <2220>;
|
||||
stride = <(1080 * 4)>;
|
||||
format = "a8r8g8b8";
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
autorepeat;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vol_up_pin>;
|
||||
|
||||
key-vol-up {
|
||||
label = "Volume Up";
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
mpss_region: mpss@8b000000 {
|
||||
reg = <0 0x8b000000 0 0x9800000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
venus_mem: venus@94800000 {
|
||||
reg = <0 0x94800000 0 0x500000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
wlan_msa_mem: wlan-msa@94d00000 {
|
||||
reg = <0 0x94d00000 0 0x100000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
cdsp_mem: cdsp@94e00000 {
|
||||
reg = <0 0x94e00000 0 0x800000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
mba_region: mba@95600000 {
|
||||
reg = <0 0x95600000 0 0x200000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
adsp_mem: adsp@95800000 {
|
||||
reg = <0 0x95800000 0 0x2200000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
ipa_fw_mem: ipa-fw@97a00000 {
|
||||
reg = <0 0x97a00000 0 0x10000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
ipa_gsi_mem: ipa-gsi@97a10000 {
|
||||
reg = <0 0x97a10000 0 0x5000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
gpu_mem: gpu@97a15000 {
|
||||
reg = <0 0x97a15000 0 0x2000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
framebuffer-region@9c000000 {
|
||||
reg = <0 0x9c000000 0 0x2400000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
/* Also includes ramoops regions */
|
||||
debug_info_mem: debug-info@a1800000 {
|
||||
reg = <0 0xa1800000 0 0x411000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* The touchscreen regulator seems to be controlled somehow by a gpio.
|
||||
* Model it as a fixed regulator and keep it on. Without schematics we
|
||||
* don't know how this is actually wired up...
|
||||
*/
|
||||
ts_1p8_supply: ts-1p8-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "ts_1p8_supply";
|
||||
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
gpio = <&pm660_gpios 12 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vph_pwr: vph-pwr-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vph_pwr";
|
||||
regulator-min-microvolt = <3312000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
/*
|
||||
* Supply map from xiaomi-lavender specifies this as the supply for
|
||||
* ldob1, ldob9, ldob10, ldoa2, and ldoa3, while downstream specifies
|
||||
* this as a power domain. Set this as a fixed regulator with the same
|
||||
* voltage as lavender until display is needed to avoid unneccessarily
|
||||
* using a deprecated binding (regulator-fixed-domain).
|
||||
*/
|
||||
vreg_s2b_1p05: vreg-s2b-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vreg_s2b";
|
||||
regulator-min-microvolt = <1050000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
};
|
||||
|
||||
cam_front_ldo: cam-front-ldo-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "cam_front_ldo";
|
||||
regulator-min-microvolt = <1352000>;
|
||||
regulator-max-microvolt = <1352000>;
|
||||
regulator-enable-ramp-delay = <135>;
|
||||
|
||||
gpios = <&pm660l_gpios 4 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-0 = <&cam_front_ldo_pin>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
cam_vio_ldo: cam-vio-ldo-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "cam_vio_ldo";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-enable-ramp-delay = <233>;
|
||||
|
||||
gpios = <&pm660_gpios 13 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-0 = <&cam_vio_pin>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
&apps_rsc {
|
||||
regulators-0 {
|
||||
compatible = "qcom,pm660-rpmh-regulators";
|
||||
qcom,pmic-id = "a";
|
||||
|
||||
vdd-s1-supply = <&vph_pwr>;
|
||||
vdd-s2-supply = <&vph_pwr>;
|
||||
vdd-s3-supply = <&vph_pwr>;
|
||||
vdd-s4-supply = <&vph_pwr>;
|
||||
vdd-s5-supply = <&vph_pwr>;
|
||||
vdd-s6-supply = <&vph_pwr>;
|
||||
|
||||
vdd-l1-l6-l7-supply = <&vreg_s6a_0p87>;
|
||||
vdd-l2-l3-supply = <&vreg_s2b_1p05>;
|
||||
vdd-l5-supply = <&vreg_s2b_1p05>;
|
||||
vdd-l8-l9-l10-l11-l12-l13-l14-supply = <&vreg_s4a_2p04>;
|
||||
vdd-l15-l16-l17-l18-l19-supply = <&vreg_bob>;
|
||||
|
||||
/*
|
||||
* S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed
|
||||
* by the Core Power Reduction hardened (CPRh) and the
|
||||
* Operating State Manager (OSM) HW automatically.
|
||||
*/
|
||||
|
||||
vreg_s4a_2p04: smps4 {
|
||||
regulator-min-microvolt = <1808000>;
|
||||
regulator-max-microvolt = <2040000>;
|
||||
regulator-enable-ramp-delay = <200>;
|
||||
};
|
||||
|
||||
vreg_s6a_0p87: smps6 {
|
||||
regulator-min-microvolt = <1224000>;
|
||||
regulator-max-microvolt = <1352000>;
|
||||
regulator-enable-ramp-delay = <150>;
|
||||
};
|
||||
|
||||
/* LDOs */
|
||||
vreg_l1a_1p225: ldo1 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l2a_1p0: ldo2 {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l3a_1p0: ldo3 {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l5a_0p848: ldo5 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <800000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l6a_1p3: ldo6 {
|
||||
regulator-min-microvolt = <1248000>;
|
||||
regulator-max-microvolt = <1304000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l7a_1p2: ldo7 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l8a_1p8: ldo8 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vreg_l9a_1p8: ldo9 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l10a_1p8: ldo10 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l11a_1p8: ldo11 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l12a_1p8: ldo12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l13a_1p8: ldo13 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l14a_1p8: ldo14 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l15a_1p8: ldo15 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l16a_2p7: ldo16 {
|
||||
regulator-min-microvolt = <2696000>;
|
||||
regulator-max-microvolt = <2696000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l17a_1p8: ldo17 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l19a_3p3: ldo19 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-1 {
|
||||
compatible = "qcom,pm660l-rpmh-regulators";
|
||||
qcom,pmic-id = "b";
|
||||
|
||||
vdd-s1-supply = <&vph_pwr>;
|
||||
vdd-s2-supply = <&vph_pwr>;
|
||||
vdd-s3-s4-supply = <&vph_pwr>;
|
||||
vdd-s5-supply = <&vph_pwr>;
|
||||
|
||||
vdd-l1-l9-l10-supply = <&vreg_s2b_1p05>;
|
||||
vdd-l2-supply = <&vreg_bob>;
|
||||
vdd-l3-l5-l7-l8-supply = <&vreg_bob>;
|
||||
vdd-l4-l6-supply = <&vreg_bob>;
|
||||
vdd-bob-supply = <&vph_pwr>;
|
||||
|
||||
/* LDOs */
|
||||
vreg_l1b_0p925: ldo1 {
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l2b_2p95: ldo2 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l3b_3p0: ldo3 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <3008000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l4b_2p95: ldo4 {
|
||||
regulator-min-microvolt = <2960000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l5b_2p95: ldo5 {
|
||||
regulator-min-microvolt = <2960000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l6b_3p3: ldo6 {
|
||||
regulator-min-microvolt = <3008000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l7b_3p125: ldo7 {
|
||||
regulator-min-microvolt = <3088000>;
|
||||
regulator-max-microvolt = <3100000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
vreg_l8b_3p3: ldo8 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
regulator-enable-ramp-delay = <250>;
|
||||
};
|
||||
|
||||
/*
|
||||
* Downstream specifies a fixed voltage of 3.312 V, but the
|
||||
* PMIC4 BOB ranges don't support that. Widen the range a
|
||||
* little to avoid adding a new BOB regulator type.
|
||||
*/
|
||||
vreg_bob: bob {
|
||||
regulator-min-microvolt = <3296000>;
|
||||
regulator-max-microvolt = <3328000>;
|
||||
regulator-enable-ramp-delay = <500>;
|
||||
};
|
||||
};
|
||||
&battery {
|
||||
charge-full-design-microamp-hours = <3000000>;
|
||||
};
|
||||
|
||||
&camss {
|
||||
vdda-phy-supply = <&vreg_l1a_1p225>;
|
||||
vdda-pll-supply = <&vreg_s6a_0p87>;
|
||||
|
||||
status = "okay";
|
||||
&framebuffer {
|
||||
height = <2220>;
|
||||
};
|
||||
|
||||
&camss_port1 {
|
||||
camss_endpoint1: endpoint {
|
||||
data-lanes = <0 1 2 3>;
|
||||
remote-endpoint = <&cam_front_endpoint>;
|
||||
};
|
||||
&panel {
|
||||
compatible = "samsung,s6e3fa7-ams559nk06";
|
||||
};
|
||||
|
||||
&cci {
|
||||
pinctrl-0 = <&cci1_default>;
|
||||
pinctrl-1 = <&cci1_sleep>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cci_i2c1 {
|
||||
camera@1a {
|
||||
compatible = "sony,imx355";
|
||||
reg = <0x1a>;
|
||||
|
||||
clocks = <&camcc CAM_CC_MCLK2_CLK>;
|
||||
|
||||
/*
|
||||
* The sensor can accept a 24 MHz clock, but 19.2 MHz has
|
||||
* better driver compatibility.
|
||||
*/
|
||||
assigned-clocks = <&camcc CAM_CC_MCLK2_CLK>;
|
||||
assigned-clock-rates = <19200000>;
|
||||
|
||||
reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
|
||||
|
||||
avdd-supply = <&cam_front_ldo>;
|
||||
dvdd-supply = <&cam_front_ldo>;
|
||||
dovdd-supply = <&cam_vio_ldo>;
|
||||
|
||||
pinctrl-0 = <&cam_mclk2_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
rotation = <270>;
|
||||
orientation = <0>;
|
||||
|
||||
port {
|
||||
cam_front_endpoint: endpoint {
|
||||
data-lanes = <1 2 3 4>;
|
||||
link-frequencies = /bits/ 64 <360000000>;
|
||||
remote-endpoint = <&camss_endpoint1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gcc {
|
||||
protected-clocks = <GCC_QSPI_CORE_CLK>,
|
||||
<GCC_QSPI_CORE_CLK_SRC>,
|
||||
<GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
|
||||
};
|
||||
|
||||
&gpi_dma1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu_zap_shader {
|
||||
firmware-name = "qcom/sdm670/sargo/a615_zap.mbn";
|
||||
};
|
||||
|
||||
&i2c9 {
|
||||
clock-frequency = <100000>;
|
||||
status = "okay";
|
||||
|
||||
synaptics-rmi4-i2c@20 {
|
||||
compatible = "syna,rmi4-i2c";
|
||||
reg = <0x20>;
|
||||
interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&touchscreen_default>;
|
||||
|
||||
vio-supply = <&ts_1p8_supply>;
|
||||
|
||||
syna,reset-delay-ms = <200>;
|
||||
syna,startup-delay-ms = <200>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
rmi4-f01@1 {
|
||||
reg = <0x01>;
|
||||
syna,nosleep-mode = <1>;
|
||||
};
|
||||
|
||||
rmi4-f12@12 {
|
||||
reg = <0x12>;
|
||||
touchscreen-x-mm = <62>;
|
||||
touchscreen-y-mm = <127>;
|
||||
syna,sensor-type = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdss {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdss_dsi0 {
|
||||
vdda-supply = <&vreg_l1a_1p225>;
|
||||
status = "okay";
|
||||
|
||||
panel@0 {
|
||||
compatible = "samsung,s6e3fa7-ams559nk06";
|
||||
reg = <0>;
|
||||
|
||||
reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&panel_default>;
|
||||
|
||||
power-supply = <&vreg_l6b_3p3>;
|
||||
|
||||
port {
|
||||
panel_in: endpoint {
|
||||
remote-endpoint = <&mdss_dsi0_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdss_dsi0_out {
|
||||
remote-endpoint = <&panel_in>;
|
||||
data-lanes = <0 1 2 3>;
|
||||
};
|
||||
|
||||
&mdss_dsi0_phy {
|
||||
vdds-supply = <&vreg_l1b_0p925>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdss_mdp {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pm660_charger {
|
||||
monitored-battery = <&battery>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pm660_gpios {
|
||||
cam_vio_pin: cam-vio-state {
|
||||
pins = "gpio13";
|
||||
function = "normal";
|
||||
power-source = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm660_rradc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pm660l_flash {
|
||||
status = "okay";
|
||||
|
||||
led-0 {
|
||||
function = LED_FUNCTION_FLASH;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
led-sources = <1>, <2>;
|
||||
led-max-microamp = <500000>;
|
||||
flash-max-microamp = <1500000>;
|
||||
flash-max-timeout-us = <1280000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm660l_gpios {
|
||||
cam_front_ldo_pin: cam-front-state {
|
||||
pins = "gpio4";
|
||||
function = "normal";
|
||||
power-source = <0>;
|
||||
};
|
||||
|
||||
vol_up_pin: vol-up-state {
|
||||
pins = "gpio7";
|
||||
function = "normal";
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||||
input-enable;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
&pon_pwrkey {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pon_resin {
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_id_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhc_1 {
|
||||
supports-cqe;
|
||||
mmc-hs200-1_8v;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-ddr-1_8v;
|
||||
|
||||
qcom,ddr-config = <0xc3040873>;
|
||||
|
||||
vmmc-supply = <&vreg_l4b_2p95>;
|
||||
vqmmc-supply = <&vreg_l8a_1p8>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio-reserved-ranges = <0 4>, <81 4>;
|
||||
|
||||
panel_default: panel-default-state {
|
||||
te-pins {
|
||||
pins = "gpio10";
|
||||
function = "mdp_vsync";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
reset-pins {
|
||||
pins = "gpio75";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
mode-pins {
|
||||
pins = "gpio76";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
touchscreen_default: ts-default-state {
|
||||
ts-reset-pins {
|
||||
pins = "gpio99";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
output-high;
|
||||
};
|
||||
|
||||
ts-irq-pins {
|
||||
pins = "gpio125";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
ts-switch-pins {
|
||||
pins = "gpio135";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb_1_hsphy {
|
||||
vdd-supply = <&vreg_l1b_0p925>;
|
||||
vdda-pll-supply = <&vreg_l10a_1p8>;
|
||||
vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1 {
|
||||
qcom,select-utmi-as-pipe-clk;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_dwc3 {
|
||||
/* Only peripheral works for now */
|
||||
dr_mode = "peripheral";
|
||||
|
||||
/* Do not assume that sdm670.dtsi will never support USB 3.0 */
|
||||
phys = <&usb_1_hsphy>;
|
||||
phy-names = "usb2-phy";
|
||||
maximum-speed = "high-speed";
|
||||
&rmi4_f12 {
|
||||
touchscreen-x-mm = <62>;
|
||||
touchscreen-y-mm = <127>;
|
||||
};
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user