The MSM DRM driver currently does not support panels which report their
supported link rates via the SUPPORTED_LINK_RATES table.
For panels which do not offer the optional eDP v1.3 fallback via
MAX_LINK_RATE, this will cause a panel probe failure (e.g. Samsung
ATNA30DW01-1 as found in Microsoft Surface Pro 11).
Detect eDP v1.4 panels and parse the SUPPORTED_LINK_RATES table when
present.
Additionally, set the rate using LINK_RATE_SET instead of LINK_BW_SET,
but only if LINK_BW_SET hasn't already been written to.
Signed-off-by: Dale Whinham <daleyo@gmail.com>
Tested-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Tested-by: Steev Klimaszewski <threeway@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/695064/
Link: https://lore.kernel.org/r/20251218-drm-msm-edp14-v2-1-2e56c2338ab1@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Since DPU 8.x Watchdog timer settings were moved from the TOP to the
INTF block. Support programming the timer in the INTF block. Fixes tag
points to the commit which removed register access to those registers on
DPU 8.x+ (and which also should have added proper support for WD timer
on those devices).
Fixes: 43e3293fc6 ("drm/msm/dpu: add support for MDP_TOP blackhole")
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/696586/
Link: https://lore.kernel.org/r/20251230-intf-fix-wd-v6-2-98203d150611@oss.qualcomm.com
Since DPU 5.x the vsync source TE setup is split between MDP TOP and
INTF blocks. Currently all code to setup vsync_source is only executed
if MDP TOP implements the setup_vsync_source() callback. However on
DPU >= 8.x this callback is not implemented, making DPU driver skip all
vsync setup. Move the INTF part out of this condition, letting DPU
driver to setup TE vsync selection on all new DPU devices.
Signed-off-by: Teguh Sobirin <teguh@sobir.in>
Fixes: 2f69e54584 ("drm/msm/dpu: skip watchdog timer programming through TOP on >= SM8450")
[DB: restored top->ops.setup_vsync_source call]
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/696584/
Link: https://lore.kernel.org/r/20251230-intf-fix-wd-v6-1-98203d150611@oss.qualcomm.com
On SC7280 targets, display modes with a width greater than the
max_mixer_width (2400) are rejected during mode validation when
merge3d is disabled. This limitation exists because, without a
3D merge block, two layer mixers cannot be combined(non-DSC interface),
preventing large layers from being split across mixers. As a result,
higher resolution modes cannot be supported.
Enable merge3d support on SC7280 to allow combining streams from
two layer mixers into a single non-DSC interface. This capability
removes the width restriction and enables buffer sizes beyond the
2400-pixel limit.
Fixes: 591e34a091 ("drm/msm/disp/dpu1: add support for display for SC7280 target")
Signed-off-by: Mahadevan P <mahadevan.p@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/696713/
Link: https://lore.kernel.org/r/20260101-4k-v2-1-712ae3c1f816@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
QCS8300 MDSS DSI controller reuses the same IP as SA8775P, with
identical register layout and programming model. Introduce a
QCS8300-specific compatible with a fallback to
`qcom,sa8775p-dsi-ctrl` to reflect this hardware reuse.
Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/696784/
Link: https://lore.kernel.org/r/20260104134442.732876-3-quic_amakhija@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
QCS8300 uses the same 5nm MDSS DSI PHY IP as SA8775P, sharing
an identical register layout and programming model. Introduce a
QCS8300-specific compatible with a fallback to `qcom,sa8775p-dsi-phy-5nm`
to reflect this hardware reuse.
Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/696783/
Link: https://lore.kernel.org/r/20260104134442.732876-2-quic_amakhija@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The refill_buf function uses snprintf to append to a fixed-size buffer.
snprintf returns the length that would have been written, which can
exceed the remaining buffer size. If this happens, ptr advances beyond
the buffer and rem becomes negative. In the 2nd iteration, rem is
treated as a large unsigned integer, causing snprintf to write oob.
While this behavior is technically mitigated by num_perfcntrs being
locked at 5, it's still unsafe if num_perfcntrs were ever to change/a
second source was added.
Signed-off-by: Evan Lambert <veyga@veygax.dev>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/696358/
Link: https://lore.kernel.org/r/20251224124254.17920-3-veyga@veygax.dev
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
It is checked almost always in dpu_encoder_phys_wb_setup_ctl(), but in a
single place the check is missing.
Also use convenient locals instead of phys_enc->* where available.
Cc: stable@vger.kernel.org
Fixes: d7d0e73f7d ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/693860/
Link: https://lore.kernel.org/r/20251211093630.171014-1-kniv@yandex-team.ru
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Correct or add kernel-doc comments to eliminate all warnings:
Warning: ../drivers/gpu/drm/msm/msm_iommu.c:381 expecting prototype for
alloc_pt(). Prototype was for msm_iommu_pagetable_alloc_pt() instead
Warning: ../drivers/gpu/drm/msm/msm_iommu.c:426 expecting prototype for
free_pt(). Prototype was for msm_iommu_pagetable_free_pt() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/695675/
Link: https://lore.kernel.org/r/20251219184638.1813181-20-rdunlap@infradead.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/msm_gpu.h:119 Incorrect use of kernel-doc
format: * devfreq: devfreq instance
Warning: drivers/gpu/drm/msm/msm_gpu.h:125 Incorrect use of kernel-doc
format: * idle_freq:
Warning: drivers/gpu/drm/msm/msm_gpu.h:136 Incorrect use of kernel-doc
format: * boost_constraint:
Warning: drivers/gpu/drm/msm/msm_gpu.h:144 Incorrect use of kernel-doc
format: * busy_cycles: Last busy counter value, for calculating elapsed
busy
Warning: drivers/gpu/drm/msm/msm_gpu.h:156 Incorrect use of kernel-doc
format: * idle_work:
Warning: drivers/gpu/drm/msm/msm_gpu.h:163 Incorrect use of kernel-doc
format: * boost_work:
Warning: drivers/gpu/drm/msm/msm_gpu.h:170 struct member 'devfreq' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:170 struct member 'boost_freq' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'devfreq' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'lock' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'governor' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'we are
continuing to sample busyness and * adjust frequency while the GPU is
idle' not described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'boost_freq' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'busy_cycles'
not described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'time' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'idle_time' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'idle_work' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'boost_work' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'suspended' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:472 No description found for
return value of 'msm_context_is_vmbind'
Warning: drivers/gpu/drm/msm/msm_gpu.h:476 struct member 'ref' not
described in 'msm_context'
Warning: drivers/gpu/drm/msm/msm_gpu.h:476 struct member 'elapsed_ns' not
described in 'msm_context'
Warning: drivers/gpu/drm/msm/msm_gpu.h:492 expecting prototype for
msm_context_is_vm_bind(). Prototype was for msm_context_is_vmbind()
instead
Warning: drivers/gpu/drm/msm/msm_gpu.h:523 No description found for
return value of 'msm_gpu_convert_priority'
Warning: drivers/gpu/drm/msm/msm_gpu.h:583 expecting prototype for
struct msm_gpu_submitqueues. Prototype was for struct msm_gpu_submitqueue
instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/695671/
Link: https://lore.kernel.org/r/20251219184638.1813181-19-rdunlap@infradead.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/msm_fence.h:27 Incorrect use of kernel-doc
format: * last_fence:
Warning: drivers/gpu/drm/msm/msm_fence.h:36 Incorrect use of kernel-doc
format: * completed_fence:
Warning: drivers/gpu/drm/msm/msm_fence.h:44 Incorrect use of kernel-doc
format: * fenceptr:
Warning: drivers/gpu/drm/msm/msm_fence.h:65 Incorrect use of kernel-doc
format: * next_deadline_fence:
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'dev' not
described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'name' not
described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'context' not
described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'index' not
described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'fence' not
described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'there is no
remaining pending work */ uint32_t last_fence' not described in
'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'updated from the CPU after interrupt * from GPU */ uint32_t completed_fence' not described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'fenceptr' not
described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'spinlock' not
described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'next_deadline'
not described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member
'next_deadline_fence' not described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'deadline_timer'
not described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'deadline_work'
not described in 'msm_fence_context'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/695667/
Link: https://lore.kernel.org/r/20251219184638.1813181-17-rdunlap@infradead.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h:24 Cannot find
identifier on line: *
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h:57 struct member
'setup_roi' not described in 'dpu_hw_wb_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h:75 struct member
'caps' not described in 'dpu_hw_wb'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/695672/
Link: https://lore.kernel.org/r/20251219184638.1813181-16-rdunlap@infradead.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:19 Incorrect use of
kernel-doc format: * set_limit_conf - set transaction limit config
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:29 Incorrect use of
kernel-doc format: * get_limit_conf - get transaction limit config
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:39 Incorrect use of
kernel-doc format: * set_halt_ctrl - set halt control
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:48 Incorrect use of
kernel-doc format: * get_halt_ctrl - get halt control
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:57 Incorrect use of
kernel-doc format: * set_qos_remap - set QoS priority remap
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:67 Incorrect use of
kernel-doc format: * set_mem_type - set memory type
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:76 Incorrect use of
kernel-doc format: * clear_errors - clear any vbif errors
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:88 Incorrect use of
kernel-doc format: * set_write_gather_en - set write_gather enable
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:93 struct member
'limit' not described in 'dpu_hw_vbif_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:93 struct member
'set_limit_conf' not described in 'dpu_hw_vbif_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:93 struct member
'get_limit_conf' not described in 'dpu_hw_vbif_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:93 struct member
'set_halt_ctrl' not described in 'dpu_hw_vbif_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:93 struct member
'get_halt_ctrl' not described in 'dpu_hw_vbif_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:93 struct member
'set_qos_remap' not described in 'dpu_hw_vbif_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:93 struct member
'set_mem_type' not described in 'dpu_hw_vbif_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:93 struct member
's' not described in 'dpu_hw_vbif_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:93 struct member
'set_write_gather_en' not described in 'dpu_hw_vbif_ops'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/695680/
Link: https://lore.kernel.org/r/20251219184638.1813181-15-rdunlap@infradead.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:93 Incorrect use of
kernel-doc format: * setup_traffic_shaper() : Setup traffic shaper control
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:101 Incorrect use of
kernel-doc format: * setup_clk_force_ctrl - set clock force control
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:111 Incorrect use of
kernel-doc format: * get_danger_status - get danger status
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:119 Incorrect use of
kernel-doc format: * setup_vsync_source - setup vsync source
configuration details
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:127 Incorrect use of
kernel-doc format: * get_safe_status - get safe status
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:135 Incorrect use of
kernel-doc format: * dp_phy_intf_sel - configure intf to phy mapping
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:142 Incorrect use of
kernel-doc format: * intf_audio_select - select the external interface
for audio
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:146 struct member
'setup_clk_force_ctrl' not described in 'dpu_hw_mdp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:146 struct member
'get_danger_status' not described in 'dpu_hw_mdp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:146 struct member
'setup_vsync_source' not described in 'dpu_hw_mdp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:146 struct member
'get_safe_status' not described in 'dpu_hw_mdp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:146 struct member
'dp_phy_intf_sel' not described in 'dpu_hw_mdp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:146 struct member
'intf_audio_select' not described in 'dpu_hw_mdp_ops'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/695669/
Link: https://lore.kernel.org/r/20251219184638.1813181-14-rdunlap@infradead.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Modify non-kernel-doc comments to begin with "/*" instead of "/**".
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:17 missing initial
short description on line: * Flags
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:19 expecting
prototype for Flags(). Prototype was for DPU_SSPP_FLIP_LR() instead
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:26 This comment
starts with '/**', but isn't a kernel-doc comment.
* Component indices
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:47 cannot understand
function prototype: 'enum dpu_sspp_multirect_index'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:152 struct member
'dst_rect' not described in 'dpu_sw_pipe_cfg'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:174 struct member
'multirect_index' not described in 'dpu_sw_pipe'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:174 struct member
'multirect_mode' not described in 'dpu_sw_pipe'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:183 Incorrect use of
kernel-doc format: * setup_format - setup pixel format cropping
rectangle, flip
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:192 Incorrect use of
kernel-doc format: * setup_rects - setup pipe ROI rectangles
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:200 Incorrect use of
kernel-doc format: * setup_pe - setup pipe pixel extension
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:208 Incorrect use of
kernel-doc format: * setup_sourceaddress - setup pipe source addresses
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:216 Incorrect use of
kernel-doc format: * setup_csc - setup color space coversion
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:223 Incorrect use of
kernel-doc format: * setup_solidfill - enable/disable colorfill
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:231 Incorrect use of
kernel-doc format: * setup_multirect - setup multirect configuration
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:238 Incorrect use of
kernel-doc format: * setup_sharpening - setup sharpening
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:247 Incorrect use of
kernel-doc format: * setup_qos_lut - setup QoS LUTs
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:255 Incorrect use of
kernel-doc format: * setup_qos_ctrl - setup QoS control
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:263 Incorrect use of
kernel-doc format: * setup_clk_force_ctrl - setup clock force control
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:271 Incorrect use of
kernel-doc format: * setup_histogram - setup histograms
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:279 Incorrect use of
kernel-doc format: * setup_scaler - setup scaler
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:288 Incorrect use of
kernel-doc format: * setup_cdp - setup client driven prefetch
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_format' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_rects' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_pe' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_sourceaddress' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_csc' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_solidfill' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_multirect' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_sharpening' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_qos_lut' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_qos_ctrl' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_clk_force_ctrl' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_histogram' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_scaler' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_cdp' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:320 struct member
'mdss_ver' not described in 'dpu_hw_sspp'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/695661/
Link: https://lore.kernel.org/r/20251219184638.1813181-13-rdunlap@infradead.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:36 Cannot find
identifier on line: *
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:46 Incorrect use
of kernel-doc format: * enables vysnc generation and sets up init value of
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:53 Incorrect use
of kernel-doc format: * disables tear check block
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:58 Incorrect use
of kernel-doc format: * read, modify, write to either set or clear
listening to external TE
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:65 Incorrect use
of kernel-doc format: * Obtain current vertical line counter
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:70 Incorrect use
of kernel-doc format: * Disable autorefresh if enabled
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:75 Incorrect use
of kernel-doc format: * Setup dither matix for pingpong block
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:80 Incorrect use
of kernel-doc format: * Enable DSC
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:85 Incorrect use
of kernel-doc format: * Disable DSC
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:90 Incorrect use
of kernel-doc format: * Setup DSC
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:93 struct member
'connect_external_te' not described in 'dpu_hw_pingpong_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:93 struct member
'disable_autorefresh' not described in 'dpu_hw_pingpong_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:93 struct member
'enable_dsc' not described in 'dpu_hw_pingpong_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:93 struct member
'disable_dsc' not described in 'dpu_hw_pingpong_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:93 struct member
'setup_dsc' not described in 'dpu_hw_pingpong_ops'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/695659/
Link: https://lore.kernel.org/r/20251219184638.1813181-12-rdunlap@infradead.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:27 Cannot find
identifier on line: *
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:52 Incorrect use of
kernel-doc format: * Clear layer mixer to pipe configuration
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:59 Incorrect use of
kernel-doc format: * Configure layer mixer to pipe configuration
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:69 Incorrect use of
kernel-doc format: * setup_border_color : enable/disable border color
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:76 Incorrect use of
kernel-doc format: * setup_misr: Enable/disable MISR
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:81 Incorrect use of
kernel-doc format: * collect_misr: Read MISR signature
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:84 struct member
'setup_mixer_out' not described in 'dpu_hw_lm_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:84 struct member
'setup_blend_config' not described in 'dpu_hw_lm_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:84 struct member
'setup_alpha_out' not described in 'dpu_hw_lm_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:84 struct member
'clear_all_blendstages' not described in 'dpu_hw_lm_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:84 struct member
'setup_blendstage' not described in 'dpu_hw_lm_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:84 struct member
'setup_border_color' not described in 'dpu_hw_lm_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:84 struct member
'setup_misr' not described in 'dpu_hw_lm_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:84 struct member
'collect_misr' not described in 'dpu_hw_lm_ops'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/695648/
Link: https://lore.kernel.org/r/20251219184638.1813181-10-rdunlap@infradead.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h:76 duplicate section
name 'Return'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h:112 Incorrect use of
kernel-doc format: * Disable autorefresh if enabled
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h:118 struct member
'setup_timing_gen' not described in 'dpu_hw_intf_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h:118 struct member
'setup_prg_fetch' not described in 'dpu_hw_intf_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h:118 struct member
'enable_timing' not described in 'dpu_hw_intf_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h:118 struct member
'get_status' not described in 'dpu_hw_intf_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h:118 struct member
'get_line_count' not described in 'dpu_hw_intf_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h:118 struct member
'disable_autorefresh' not described in 'dpu_hw_intf_ops'
dpu_hw_intf.h:119: warning: Excess struct member 'get_vsync_info'
description in 'dpu_hw_intf_ops'
dpu_hw_intf.h:119: warning: Excess struct member 'setup_autorefresh'
description in 'dpu_hw_intf_ops'
dpu_hw_intf.h:119: warning: Excess struct member 'get_autorefresh'
description in 'dpu_hw_intf_ops'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/695646/
Link: https://lore.kernel.org/r/20251219184638.1813181-9-rdunlap@infradead.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dspp.h:33 expecting prototype
for struct dpu_hw_pcc. Prototype was for struct dpu_hw_pcc_cfg instead
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dspp.h:42 Incorrect use of
kernel-doc format: * setup_pcc - setup dspp pcc
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dspp.h:48 struct member
'setup_pcc' not described in 'dpu_hw_dspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dspp.h:76 expecting prototype
for dpu_hw_dspp(). Prototype was for to_dpu_hw_dspp() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/695652/
Link: https://lore.kernel.org/r/20251219184638.1813181-8-rdunlap@infradead.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h:23 Incorrect use of
kernel-doc format: * dsc_disable - disable dsc
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h:29 Incorrect use of
kernel-doc format: * dsc_config - configures dsc encoder
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h:41 Incorrect use of
kernel-doc format: * dsc_config_thresh - programs panel thresholds
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h:50 struct member
'dsc_disable' not described in 'dpu_hw_dsc_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h:50 struct member
'dsc_config' not described in 'dpu_hw_dsc_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h:50 struct member
'dsc_config_thresh' not described in 'dpu_hw_dsc_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h:50 struct member
'dsc_bind_pingpong_blk' not described in 'dpu_hw_dsc_ops'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/695658/
Link: https://lore.kernel.org/r/20251219184638.1813181-7-rdunlap@infradead.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Correct and add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:18 cannot understand
function prototype: 'enum dpu_ctl_mode_sel'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:58 struct member 'wb'
not described in 'dpu_hw_intf_cfg'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:66 Incorrect use of
kernel-doc format: * kickoff hw operation for Sw controlled interfaces
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:73 Incorrect use of
kernel-doc format: * check if the ctl is started
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:80 Incorrect use of
kernel-doc format: * kickoff prepare is in progress hw operation for sw
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:88 Incorrect use of
kernel-doc format: * Clear the value of the cached pending_flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:96 Incorrect use of
kernel-doc format: * Query the value of the cached pending_flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:103 Incorrect use of
kernel-doc format: * OR in the given flushbits to the cached
pending_flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:112 Incorrect use of
kernel-doc format: * OR in the given flushbits to the
cached pending_(wb_)flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:121 Incorrect use of
kernel-doc format: * OR in the given flushbits to the cached
pending_(cwb_)flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:130 Incorrect use of
kernel-doc format: * OR in the given flushbits to the cached
pending_(intf_)flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:139 Incorrect use of
kernel-doc format: * OR in the given flushbits to the cached
pending_(periph_)flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:148 Incorrect use of
kernel-doc format: * OR in the given flushbits to the cached
pending_(merge_3d_)flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:157 Incorrect use of
kernel-doc format: * OR in the given flushbits to the cached
pending_flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:166 Incorrect use of
kernel-doc format: * OR in the given flushbits to the cached
pending_flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:175 Incorrect use of
kernel-doc format: * OR in the given flushbits to the cached
pending_flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:185 Incorrect use of
kernel-doc format: * OR in the given flushbits to the cached
pending_(dsc_)flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:194 Incorrect use of
kernel-doc format: * OR in the given flushbits to the cached
pending_(cdm_)flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:202 Incorrect use of
kernel-doc format: * Write the value of the pending_flush_mask to hardware
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:208 Incorrect use of
kernel-doc format: * Read the value of the flush register
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:215 Incorrect use of
kernel-doc format: * Setup ctl_path interface config
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:223 Incorrect use of
kernel-doc format: * reset ctl_path interface config
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:244 Incorrect use of
kernel-doc format: * Set all blend stages to disabled
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:250 Incorrect use of
kernel-doc format: * Configure layer mixer to pipe configuration
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:262 Incorrect use of
kernel-doc format: * Set active pipes attached to this CTL
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:270 Incorrect use of
kernel-doc format: * Set active layer mixers attached to this CTL
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:277 struct member
'trigger_start' not described in 'dpu_hw_ctl_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:277 struct member
'is_started' not described in 'dpu_hw_ctl_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:277 struct member
'trigger_pending' not described in 'dpu_hw_ctl_ops'
[many here]
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:319 struct member
'pending_periph_flush_mask' not described in 'dpu_hw_ctl'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:319 struct member
'pending_merge_3d_flush_mask' not described in 'dpu_hw_ctl'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:319 struct member
'pending_dspp_flush_mask' not described in 'dpu_hw_ctl'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:327 expecting
prototype for dpu_hw_ctl(). Prototype was for to_dpu_hw_ctl() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/695649/
Link: https://lore.kernel.org/r/20251219184638.1813181-5-rdunlap@infradead.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Correct and add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.h:91 Incorrect use of
kernel-doc format: * Enable the CDM module
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.h:97 Incorrect use of
kernel-doc format: * Enable/disable the connection with pingpong
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/695651/
Link: https://lore.kernel.org/r/20251219184638.1813181-4-rdunlap@infradead.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Correct and add kernel-doc comments to eliminate all warnings:
Warning: ../drivers/gpu/drm/msm/dp/dp_debug.h:31 expecting prototype for
msm_dp_debug_get(). Prototype was for msm_dp_debug_init() instead
Warning: ../drivers/gpu/drm/msm/dp/dp_drm.c:24 function parameter
'connector' not described in 'msm_dp_bridge_detect'
Warning: ../drivers/gpu/drm/msm/dp/dp_link.h:90 expecting prototype for
mdss_dp_test_bit_depth_to_bpp(). Prototype was for
msm_dp_link_bit_depth_to_bpp() instead
Warning: ../drivers/gpu/drm/msm/dp/dp_link.h:126 function parameter
'aux' not described in 'msm_dp_link_get'
Warning: ../drivers/gpu/drm/msm/dp/dp_link.h:126 function parameter
'dev' not described in 'msm_dp_link_get'
Warning: ../drivers/gpu/drm/msm/dp/dp_panel.h:70 function parameter
'bw_code' not described in 'is_link_rate_valid'
Warning: ../drivers/gpu/drm/msm/dp/dp_panel.h:84 expecting prototype for
msm_dp_link_is_lane_count_valid(). Prototype was for
is_lane_count_valid() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/695647/
Link: https://lore.kernel.org/r/20251219184638.1813181-3-rdunlap@infradead.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Correct and add kernel-doc comments to eliminate all warnings:
Warning: ../drivers/gpu/drm/msm/disp/mdp_format.h:27 This comment starts
with '/**', but isn't a kernel-doc comment.
Warning: ../drivers/gpu/drm/msm/disp/mdp_format.h:64 struct member
'bpc_a' not described in 'msm_format'
Warning: ../drivers/gpu/drm/msm/disp/mdp_format.h:64 struct member
'bpc_b_cb' not described in 'msm_format'
Warning: ../drivers/gpu/drm/msm/disp/mdp_format.h:64 struct member
'bpc_g_y' not described in 'msm_format'
Warning: ../drivers/gpu/drm/msm/disp/mdp_format.h:64 struct member
'bpc_r_cr' not described in 'msm_format'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/695650/
Link: https://lore.kernel.org/r/20251219184638.1813181-2-rdunlap@infradead.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
GEN7_GRAS_NC_MODE_CNTL was only programmed for BR and not for BV pipe
but it needs to be programmed for both.
Program both pipes in hw_init and introducea separate reglist for it in
order to add this register to the dynamic reglist which supports
restoring registers per pipe.
Fixes: 91389b4e32 ("drm/msm/a6xx: Add a pwrup_list field to a6xx_info")
Cc: stable@vger.kernel.org
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Signed-off-by: Anna Maniscalco <anna.maniscalco2000@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/691553/
Message-ID: <20251201-gras_nc_mode_fix-v3-1-92a8a10d91d0@gmail.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Previously this register would become 0 after IFPC took place which
broke all usages of counters.
Fixes: a6a0157cc6 ("drm/msm/a6xx: Enable IFPC on Adreno X1-85")
Cc: stable@vger.kernel.org
Signed-off-by: Anna Maniscalco <anna.maniscalco2000@gmail.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/690960/
Message-ID: <20251127-ifpc_counters-v3-1-fac0a126bc88@gmail.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Move the call to preempt_prepare_postamble() after verifying that
preempt_postamble_ptr is valid. If preempt_postamble_ptr is NULL,
dereferencing it in preempt_prepare_postamble() would lead to a crash.
This change avoids calling the preparation function when the
postamble allocation has failed, preventing potential NULL pointer
dereference and ensuring proper error handling.
Fixes: 50117cad0c ("drm/msm/a6xx: Use posamble to reset counters on preemption")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Patchwork: https://patchwork.freedesktop.org/patch/687659/
Message-ID: <20251113082839.3821867-1-alok.a.tiwari@oracle.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
On plaforms with an a7xx GPU not supporting IFPC, the ifpc_reglist
if still deferenced in a7xx_patch_pwrup_reglist() which causes
a kernel crash:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
...
pc : a6xx_hw_init+0x155c/0x1e4c [msm]
lr : a6xx_hw_init+0x9a8/0x1e4c [msm]
...
Call trace:
a6xx_hw_init+0x155c/0x1e4c [msm] (P)
msm_gpu_hw_init+0x58/0x88 [msm]
adreno_load_gpu+0x94/0x1fc [msm]
msm_open+0xe4/0xf4 [msm]
drm_file_alloc+0x1a0/0x2e4 [drm]
drm_client_init+0x7c/0x104 [drm]
drm_fbdev_client_setup+0x94/0xcf0 [drm_client_lib]
drm_client_setup+0xb4/0xd8 [drm_client_lib]
msm_drm_kms_post_init+0x2c/0x3c [msm]
msm_drm_init+0x1a4/0x228 [msm]
msm_drm_bind+0x30/0x3c [msm]
...
Check the validity of ifpc_reglist before deferencing the table
to setup the register values.
Fixes: a6a0157cc6 ("drm/msm/a6xx: Enable IFPC on Adreno X1-85")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/688944/
Message-ID: <20251117-topic-sm8x50-fix-a6xx-non-ifpc-v1-1-e4473cbf5903@linaro.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Document Adreno X2-85 GMU found in Glymur chipsets in the
dt-binding specification. It is very similar to Adreno 840
GMU with the additional requirement of RSCC HUB clock.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/689032/
Message-ID: <20251118-kaana-gpu-support-v4-21-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Document Adreno 840 GMU in the dt-binding specification.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/689031/
Message-ID: <20251118-kaana-gpu-support-v4-20-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Update the devicetree bindings to document the GPU SMMUs present in
Kaanapali and Glymur chipsets.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/689028/
Message-ID: <20251118-kaana-gpu-support-v4-19-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Adreno X2-85 GPU is found in the next generation of Qualcomm's compute
series chipset called Snapdragon X2 Elite (a.k.a Glymur). It is based
on the new A8x slice architecture and features up to 4 slices. Due to
the wider 12 channel DDR support, there is higher DDR bandwidth available
than previous generation to improve performance.
Add a new entry in the catalog along with the necessary register
configurations to enable support for it.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/689026/
Message-ID: <20251118-kaana-gpu-support-v4-18-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
GMU lies on the CX domain and accesses CX GBIF. So do CX GBIF
configurations before GMU wakes up. This was not a problem so far, but
A840 GPU is very sensitive to this requirement. Also, move these
registers to the catalog.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/689024/
Message-ID: <20251118-kaana-gpu-support-v4-17-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Adreno 840 present in Kaanapali SoC is the second generation GPU in
A8x family. It comes in 2 variants with either 2 or 3 Slices. This is
in addition to the SKUs supported based on the GPU FMAX.
Add the necessary register configurations to the catalog and enable
support for it.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/689022/
Message-ID: <20251118-kaana-gpu-support-v4-16-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
AQE (Applicaton Qrisc Engine) is a dedicated core inside CP which aides
in Raytracing related workloads. Add support for loading the AQE firmware
and initialize the necessary registers.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/689020/
Message-ID: <20251118-kaana-gpu-support-v4-15-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
A8x is the next generation of Adreno GPUs, featuring a significant
hardware design change. A major update to the design is the introduction
of Slice architecture. Slices are sort of mini-GPUs within the GPU which
are more independent in processing Graphics and compute workloads. Also,
in addition to the BV and BR pipe we saw in A7x, CP has more concurrency
with additional pipes.
From a software interface perspective, these changes have a significant
impact on the KMD side. First, the GPU register space has been extensively
reorganized. Second, to avoid a register space explosion caused by the
new slice architecture and additional pipes, many registers are now
virtualized, instead of duplicated as in A7x. KMD must configure an
aperture register with the appropriate slice and pipe ID before accessing
these virtualized registers.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/689019/
Message-ID: <20251118-kaana-gpu-support-v4-14-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
A8x GMU firmwares expect a separate vote table which describes the
relationship between the Gx rail and MxA rail (and possibly Cx rail).
Create this new vote table and implement the new HFI message which
allows passing vote tables to send this data to GMU.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/689016/
Message-ID: <20251118-kaana-gpu-support-v4-13-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Current logic assumes that the voltage corners in both MxG and MxA are
always same. This is not true for recent targets. So, rework the rpmh init
sequence to probe and calculate the votes with the respective rails, ie,
GX rails should use MxG as secondary rail and Cx rail should use MxA as
the secondary rail.
Fixes: d6225e0cd0 ("drm/msm/adreno: Add support for X185 GPU")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/689014/
Message-ID: <20251118-kaana-gpu-support-v4-12-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
A8x GMU configurations are very similar to A7x. Unfortunately, there are
minor shuffling in the register offsets in the GMU CX register region.
So, update the driver to use the correct register offsets on A8x hw.
Some A8x GPUs have more than 16 powerlevels on GX domain and 4 on CX
domain. To accommodate this, increase the arrays' sizes which hold gx and
cx power levels.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/689013/
Message-ID: <20251118-kaana-gpu-support-v4-11-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
GMU registers are always at a fixed offset from the GPU base address,
a consistency maintained at least within a given architecture generation.
In A8x family, the base address of the GMU has changed, but the offsets
of the gmu registers remain largely the same. To enable reuse of the gmu
code for A8x chipsets, update the gmu register offsets to be relative
to the GPU's base address instead of GMU's.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/689010/
Message-ID: <20251118-kaana-gpu-support-v4-10-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Sync the latest register definitions from Mesa which includes the
updates for A8x family.
Co-developed-by: Rob Clark <robin.clark@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/689009/
Message-ID: <20251118-kaana-gpu-support-v4-9-86eeb8e93fb6@oss.qualcomm.com>
Move MMU fault handler for each generation to adreno function list. This
will help to use common code for mmu pagefault handler registration between
a6x/a7x and a8x layer.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/689007/
Message-ID: <20251118-kaana-gpu-support-v4-8-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Move the gbif halt fn to adreno_gpu_func so that we can call different
implementation from common code. This will come handy when we implement
A8x layer.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/689005/
Message-ID: <20251118-kaana-gpu-support-v4-7-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
In A6x family (which is a pretty big one), there are separate
adreno_func definitions for each sub-generations. To streamline the
identification of the correct struct for a gpu, move it to the
catalogue and move the gpu_init routine to struct adreno_gpu_funcs.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/689003/
Message-ID: <20251118-kaana-gpu-support-v4-6-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
