Fix several places where %ld or %d has been used in place of
%lu or %u.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When driver not support atomic, fb using plane->fb rather than
plane->state->fb.
Fixes: fe151ed7af ("drm/amdgpu: add generic display panic helper code")
Signed-off-by: Lu Yao <yaolu@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix copy&paste error, that should have been an assignment instead of an or,
otherwise MTYPE_UC 0x3 can not be updated to MTYPE_RW 0x1.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GPU board and Baseboard temperatures come from system metrics table.
Driver keeps separate metrics table for both. Use the new driver table
structure to represent them.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If cached gpu metrics table is available, return it directly. Also,
deprecate gpu_metrics_table variables as they are no longer used.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use driver table structure for gpu metrics in smuv14. The default cache
interval is set at 5ms.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use driver table structure for gpu metrics in smuv13. The default cache
interval is set at 5ms.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use driver table structure for gpu metrics in smuv12. The default cache
interval is set at 5ms.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use driver table structure for gpu metrics in smuv11. The default cache
interval is set at 5ms.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: Added SPI bits to sh_mask header
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For interfaces like gpu metrics, driver returns a formatted structure
based on IP version. Add a separate data structure for such tables which
also tracks the cache intervals.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
put wrong value into incorrect data into following function,
which caused it to fail to match the correct item on smu v13.0.0:
smu_cmn_print_pcie_levels()
Fixes: a95f01edd8 ("drm/amd/pm: Use common helper for smuv13.0.0 dpm")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
put wrong value into incorrect data into following function,
which caused it to fail to match the correct item on smu v13.0.7:
smu_cmn_print_pcie_levels()
Fixes: b2debbbb60 ("drm/amd/pm: Use common helper for smuv13.0.7 dpm")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
put wrong value into incorrect data into following function,
which caused it to fail to match the correct item on smu v14.0.2:
smu_cmn_print_pcie_levels()
Fixes: 03d11f8564 ("drm/amd/pm: Use common helper for smuv14.0.2 dpm")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
define following heler to convert pmfw pcie dpm index to smu index.
- SMU_DPM_PCIE_GEN_IDX(gen)
- SMU_DPM_PCIE_WIDTH_IDX(width)
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function acquire_packet_buffer() was renamed
kq_acquire_packet_buffer() by commit a5a4d68c93 ("drm/amdkfd:
Eliminate unnecessary kernel queue function pointers"). Update
the comment accordingly.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function amdgpu_amdkfd_gpuvm_import_dmabuf() was split into
import_obj_create() and amdgpu_amdkfd_gpuvm_import_dmabuf_fd() in
commit 0188006d7c ("drm/amdkfd: Import DMABufs for interop
through DRM"). import_obj_create() now does the allocation for
the mem variable discussed in the comment.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During Mode 1 reset, the ASIC undergoes a reset cycle and becomes
temporarily inaccessible via PCIe. Any attempt to access MMIO registers
during this window (e.g., from interrupt handlers or other driver threads)
can result in uncompleted PCIe transactions, leading to NMI panics or
system hangs.
To prevent this, set the `no_hw_access` flag to true immediately after
triggering the reset. This signals other driver components to skip
register accesses while the device is offline.
A memory barrier `smp_mb()` is added to ensure the flag update is
globally visible to all cores before the driver enters the sleep/wait
state.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit simplifies the amdgpu_gem_va_ioctl function, key updates
include:
- Moved the logic for managing the last update fence directly into
amdgpu_gem_va_update_vm.
- Introduced checks for the timeline point to enable conditional
replacement or addition of fences.
v2: Addressed review comments from Christian.
v3: Updated comments (Christian).
v4: The previous version selected the fence too early and did not manage its
reference correctly, which could lead to stale or freed fences being used.
This resulted in refcount underflows and could crash when updating GPU
timelines.
The fence is now chosen only after the VA mapping work is completed, and its
reference is taken safely. After exporting it to the VM timeline syncobj, the
driver always drops its local fence reference, ensuring balanced refcounting
and avoiding use-after-free on dma_fence.
Crash signature:
[ 205.828135] refcount_t: underflow; use-after-free.
[ 205.832963] WARNING: CPU: 30 PID: 7274 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110
...
[ 206.074014] Call Trace:
[ 206.076488] <TASK>
[ 206.078608] amdgpu_gem_va_ioctl+0x6ea/0x740 [amdgpu]
[ 206.084040] ? __pfx_amdgpu_gem_va_ioctl+0x10/0x10 [amdgpu]
[ 206.089994] drm_ioctl_kernel+0x86/0xe0 [drm]
[ 206.094415] drm_ioctl+0x26e/0x520 [drm]
[ 206.098424] ? __pfx_amdgpu_gem_va_ioctl+0x10/0x10 [amdgpu]
[ 206.104402] amdgpu_drm_ioctl+0x4b/0x80 [amdgpu]
[ 206.109387] __x64_sys_ioctl+0x96/0xe0
[ 206.113156] do_syscall_64+0x66/0x2d0
...
[ 206.553351] BUG: unable to handle page fault for address: ffffffffc0dfde90
...
[ 206.553378] RIP: 0010:dma_fence_signal_timestamp_locked+0x39/0xe0
...
[ 206.553405] Call Trace:
[ 206.553409] <IRQ>
[ 206.553415] ? __pfx_drm_sched_fence_free_rcu+0x10/0x10 [gpu_sched]
[ 206.553424] dma_fence_signal+0x30/0x60
[ 206.553427] drm_sched_job_done.isra.0+0x123/0x150 [gpu_sched]
[ 206.553434] dma_fence_signal_timestamp_locked+0x6e/0xe0
[ 206.553437] dma_fence_signal+0x30/0x60
[ 206.553441] amdgpu_fence_process+0xd8/0x150 [amdgpu]
[ 206.553854] sdma_v4_0_process_trap_irq+0x97/0xb0 [amdgpu]
[ 206.554353] edac_mce_amd(E) ee1004(E)
[ 206.554270] amdgpu_irq_dispatch+0x150/0x230 [amdgpu]
[ 206.554702] amdgpu_ih_process+0x6a/0x180 [amdgpu]
[ 206.555101] amdgpu_irq_handler+0x23/0x60 [amdgpu]
[ 206.555500] __handle_irq_event_percpu+0x4a/0x1c0
[ 206.555506] handle_irq_event+0x38/0x80
[ 206.555509] handle_edge_irq+0x92/0x1e0
[ 206.555513] __common_interrupt+0x3e/0xb0
[ 206.555519] common_interrupt+0x80/0xa0
[ 206.555525] </IRQ>
[ 206.555527] <TASK>
...
[ 206.555650] RIP: 0010:dma_fence_signal_timestamp_locked+0x39/0xe0
...
[ 206.555667] Kernel panic - not syncing: Fatal exception in interrupt
Link: https://patchwork.freedesktop.org/patch/654669/
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when an address is reserved already, no need to check if it is
in critical or not, to save time
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Query for VPE block_type and ip_count is missing.
[How]
Add VPE case in ip_block_type and hw_ip_count query.
Reviewed-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace AMDGPU_NPS8_PARTITION_MODE with
UMC_MEMORY_PARTITION_MODE_NPS8 to pass sriov
compilation.
Signed-off-by: Jinzhou Su <jinzhou.su@amd.com>
Reviewed-by: YiPeng Chai <YiPeng.Chai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The analog link detection code path had already performed the
DAC load detection by the time the EDID read is attempted.
So there is no need to repeat the DAC load detection,
we can know that no display is connected if no EDID is read.
Fixes: ac1bb49522 ("drm/amd/display: Use DAC load detection on analog connectors (v2)")
Suggested-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Apparently the DAC encoder needs to be set up before use.
The BIOS parser in DC did not support this so I assumed it was
not necessary, but the DAC doesn't work without it on some GPUs.
Fixes: 69b29b8946 ("drm/amd/display: Hook up DAC to bios_parser_encoder_control")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pass the correct enum values as expected by the VBIOS.
Previously the actual bit depth integer value was passed,
which was a mistake.
Fixes: 7fb4f254c8 ("drm/amd/display: Add SelectCRTC_Source to BIOS parser")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Similarly to the analog_engine field, add a new analog_id field
which contains the encoder ID of the analog encoder that
corresponds to the link encoder.
Previously, the default encoder ID of the link encoder was used,
which meant that we passed the wrong ID in case of DVI-I.
Fixes: 5834c33fd3 ("drm/amd/display: Add concept of analog encoders (v2)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GFX ring resets work differently on pre-GFX10 hardware since
there is no MQD managed by the scheduler.
For ring reset, you need issue the reset via CP_VMID_RESET
via KIQ or MMIO and submit the following to the gfx ring to
complete the reset:
1. EOP packet with EXEC bit set
2. WAIT_REG_MEM to wait for the fence
3. Clear CP_VMID_RESET to 0
4. EVENT_WRITE ENABLE_LEGACY_PIPELINE
5. EOP packet with EXEC bit set
6. WAIT_REG_MEM to wait for the fence
Once those commands have completed the reset should
be complete and the ring can accept new packets.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Jiqian Chen <Jiqian.Chen@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace WAIT_REG_MEM with EVENT_WRITE flushes for all
shader types and ACQUIRE_MEM. That should accomplish
the same thing and avoid having to wait on a fence
preventing any issues with pipeline syncs during
queue resets.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only set an error on the fence if the fence is not
signalled. We can end up with a warning if the
per queue reset path signals the fence and sets an error
as part of the reset, but fails to recover.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ISP mfd child devices are using genpd and the system suspend-resume
operations between genpd and amdgpu parent device which uses only
runtime suspend-resume are not in sync.
Linux power manager during suspend-resume resuming the genpd devices
earlier than the amdgpu parent device. This is resulting in the below
warning as SMU is in suspended state when genpd attempts to resume ISP.
WARNING: CPU: 13 PID: 5435 at drivers/gpu/drm/amd/amdgpu/../pm/swsmu/amdgpu_smu.c:398 smu_dpm_set_power_gate+0x36f/0x380 [amdgpu]
To fix this warning isp suspend-resume is handled as part of amdgpu
parent device suspend-resume instead of genpd sequence. Each ISP MFD
child device is marked as dev_pm_syscore_device to skip genpd
suspend-resume and use pm_runtime_force api's to suspend-resume
the devices when callbacks from amdgpu are received.
Co-developed-by: Gjorgji Rosikopulos <grosikop@amd.com>
Signed-off-by: Gjorgji Rosikopulos <grosikop@amd.com>
Signed-off-by: Bin Du <bin.du@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following updates:
- Add frame skip feature support flag.
- Add sink EDID data null check.
- Update function name to link_detect_connection_type_analog.
- Fix mismatched unlock for DMUB HW lock in HWSS fast path.
- Fix P010, NV12, YUY2 scale down by four times failure.
- Fix and reenable UPDATE_V3_FLOW_NEW_CONTEXT_MINIMAL.
- Consolidate dmub fb info to a single struct.
- Add new fields to fams2 config.
- Update timing source enums.
- Add signal type check for dcn401 get_phyd32clk_src.
- Fix dsc eDP issue.
- Remove unnecessary divider update flag.
- Update dc_connection_dac_load to dc_connection_analog_load.
- Check NULL before calling dac_load_detection.
- Replace log macro for analog display detection.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
link detection should use LINK_INFO() macro.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dac_load_detection can be NULL in some scenario, so checking it before
calling.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update to a more accurate name dc_connection_analog_load.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When transitioning from 640x480 at RBRx1 to HBR3x1,
both output pixel mode and pixel rate divider should update.
The needs_divider_update flag was only for 8b10b and 128b132b transition.
[How]
Remove needs_divider_update flag.
Reviewed-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Need to add function hook check before use
Reviewed-by: Mohit Bawa <mohit.bawa@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Trying to access link enc on a dpia link will cause a crash otherwise
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Adds new fields to the fams2 configuration structure.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Consolidate dmub fb info into a single structure to simplify translation
between components.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Reenable new split implementation, previously partially reverted due
to issues with ODM on high-bandwidth displays 4k144Hz, resulting
in a corrupted gray screen.
Minimal flows require two separate commits, with extra intermediate
commit to enable seamless transitions, each followed by a swap. Since
new design requires commit to be run in execute and swap in cleanup
stage, an attempt was made to reorder them from CSCS (Commit-Swap-Commit-Swap)
to CCSS (Commit-Commit-Swap-Swap). Not only is this not viable, but
was implemented incorrectly as CCS, one swap missing.
[How]
* Change UPDATE_V3_FLOW_NEW_CONTEXT_MINIMAL_NEW/CURRENT to execute
and cleanup one commit, then run UPDATE_V3_FLOW_NEW_CONTEXT_SEAMLESS,
which closely matches old implementation where minimal flows fall back
to seamless.
* Fix uninitialized variable error.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When performing 4:1 downscaling with subsampled formats,
the SPL remainder distribution logic (+1) overrides the
upper layer’s aligned width, resulting in odd segment
widths and causing hang.
The upper layer alignment ensures the width is sufficient
and even, so SPL should not modify it further.
[HOW]
In dc_spl.c within calculate_mpc_slice_in_timing_active,
add an extra condition: Skip the remainder distribution
(+1) when use_recout_width_aligned is true.This change
respects the upper layer’s alignment decision, prevents
odd widths, and is a minimal, safe fix.
Reviewed-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Kaier Hsueh <Kaier.Hsueh@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The evaluation for whether we need to use the DMUB HW lock isn't the
same as whether we need to unlock which results in a hang when the
fast path is used for ASIC without FAMS support.
[How]
Store a flag that indicates whether we should use the lock and use
that same flag to specify whether unlocking is needed.
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Update function "link_detect_analog" to a more accurate name
"link_detect_connection_type_analog".
Suggested-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When sink EDID data pointer is NULL, it will cause an
unexpected error.
[How]
Check data pointer is not NULL first.
Reviewed-by: Yihan Zhu <yihan.zhu@amd.com>
Signed-off-by: Richard Chiang <Richard.Chiang@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
