It is unexpected, but allowed to have no initial payload for a bytes
control and the code is prepared to handle this case, but the size check
missed this corner case.
Update the check for minimal size to allow the initial size to be 0.
Cc: stable@vger.kernel.org
Fixes: a653820700 ("ASoC: SOF: ipc4-topology: Correct the allocation size for bytes controls")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20260326075618.1603-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pcm_id value is __le32 so convert it before passing to the dev_dbg
function to be printed. Also fixup some other uses of __le32 data and
a couple of places where %u should have been used instead of %d
Picked up by sparse prototype for variadic and printf
function checking. Fixes a large number of sparse warnings, such as:
sound/soc/sof/pcm.c:84:25: warning: incorrect type in argument 4 (different base types)
sound/soc/sof/pcm.c:84:25: expected unsigned int
sound/soc/sof/pcm.c:84:25: got restricted __le32 [usertype] pcm_id
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260324133403.107708-1-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
struct asoc_sdw_codec_info has part_id which is not
sufficient to uniquely identify devices. This change
adds the vendor_id field and updates the codec_info
list with the corresponding vendor id as per the
Manufacturer's id in https://mid.mipi.org/
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260324041300.784-1-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_parse_token_sets() accepts array->size values that can be invalid
for a vendor tuple array header. In particular, a zero size does not
advance the parser state and can lead to non-progress parsing on
malformed topology data.
Validate array->size against the minimum header size and reject values
smaller than sizeof(*array) before parsing. This preserves behavior for
valid topologies and hardens malformed-input handling.
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260319-sof-topology-array-size-fix-v1-1-f9191b16b1b7@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87fr60jypf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pcm_id value is __le32 so convert it before passing to the dev_dbg
function to be printed. Also fixup some other uses of __le32 data and
a couple of places where %u should have been used instead of %d
Picked up by sparse prototype for variadic and printf
function checking. Fixes a large number of sparse warnings, such as:
sound/soc/sof/pcm.c:84:25: warning: incorrect type in argument 4 (different base types)
sound/soc/sof/pcm.c:84:25: expected unsigned int
sound/soc/sof/pcm.c:84:25: got restricted __le32 [usertype] pcm_id
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260310125106.178944-1-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
This release is almost all abut driers, there's very little core work
here, although some of that driver work is in more generic areas like
SDCA and SOF:
- Generic SDCA support for reporting jack events.
- Continuing platform support, cleanup and feature improements for the
AMD, Intel, Qualcomm and SOF code.
- Platform description improvements for the Cirrus drivers.
- Support for NXP i.MX952, Realtek RT1320 and RT5575, and Sophogo
CV1800B.
We also pulled in one small SPI API update and some more substantial
regmap work (cache description improvements) for use in drivers.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmmKCo0ACgkQJNaLcl1U
h9AU7Af/Tu4SmEmMFW58Rn6DYPzX6P/eRvRW1wiazt+b3pyO8qPjRxhvpsBtSbVz
/TyhaO90QnBM7+31p6Hes4nHyC5HcOXXRNb/drt26kQmRpJPMH6NErm7Js6LXDyY
Yk/hzfyqG+DOFFlVoh9vnVE4jr1c4Oasqp8+FCzWbx8l1Y4ZgMEj2T7eQdfiowME
ILjislHqjoPPK4ZPCsGtbmVVYhT4+FMJLZaUDsaCLNRyWxVt1vutrWyvI6w6sA7d
9MUIECfE7MtLy1TaZRT2x0we+eWIjV1ji/7LalKmGvLPCSwTSbRh7A25RqZgL1lf
4/g08iQxIG37yEAmImxxqJnjsfS0yg==
=iwVH
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v7.0
This release is almost all abut driers, there's very little core work
here, although some of that driver work is in more generic areas like
SDCA and SOF:
- Generic SDCA support for reporting jack events.
- Continuing platform support, cleanup and feature improements for the
AMD, Intel, Qualcomm and SOF code.
- Platform description improvements for the Cirrus drivers.
- Support for NXP i.MX952, Realtek RT1320 and RT5575, and Sophogo
CV1800B.
We also pulled in one small SPI API update and some more substantial
regmap work (cache description improvements) for use in drivers.
The _hda_dsp_stream_put() function now depends on the
snd_hdac_ext_stream_release() interface from SND_HDA_EXT_CORE:
x86_64-linux-ld: vmlinux.o: in function `_hda_dsp_stream_put':
hda-stream.c:(.text+0xfac605): undefined reference to `snd_hdac_ext_stream_release'
Select this symbol the same way the other users do.
Fixes: 89e1d632bb ("ASoC: SOF: Intel: add hda_dsp_stream_pair_get/put helpers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260209070901.857700-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a virtual CPU DAI for loopback capture for echo reference
implementation. We can't use the snd-soc-dummy-dai because it is already
used for the bluetooth DAI link.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Mateusz Redzynia <mateuszx.redzynia@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260204081833.16630-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If there's a mismatch between the DAI links in the machine driver and
the topology, it is possible that the playback/capture widget is not
set, especially in the case of loopback capture for echo reference
where we use the dummy DAI link. Return the error when the widget is not
set to avoid a null pointer dereference like below when the topology is
broken.
RIP: 0010:hda_dai_get_ops.isra.0+0x14/0xa0 [snd_sof_intel_hda_common]
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Mateusz Redzynia <mateuszx.redzynia@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260204081833.16630-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
An example of a DAI-less loopback pipeline would be the echo
reference capture in the speaker playback path. This pipeline
is set up as follows:
Host(Playback) -> mixin -> mixout -> gain -> module-copier -> DAI
|
V
Host(Capture) <- Process module <- virtual DAI
In the above example, the virtual DAI exploits the concept of an
aggregated DAI (one with a non-zero DAI ID) in topology to enable this
pipeline to work with DPCM. A virtual DAI is a DAI widget with a
non-zero DAI ID and hence is skipped when traversing the list of DAPM
widgets during widget prepare/set/up/free/unprepare. The process module
in the above pipeline generates 0's that are captured by the echo
reference PCM. When the playback path is active, the process module acts
as a passthrough module to allow the playback samples to be passthrough
to the capture host.
In order for these pipelines to work properly, the logic for
setting/preparing/freeing/unpreparing the widgets needs to be amended to
make sure that only the widgets that are in the pipeline in the same
direction as the PCM being started are set up. For example, when the
playback PCM is started, the capture pipeline widgets also show up in
the list of connected DAPM widgets but they shouldn't be set up yet
because the echo reference capture PCM hasn't been started yet.
Alternatively, when the echo reference capture PCM is started, the
playback pipeline widgets should not be setup.
Finally, the last step needed to put this all together is the set the
routes for widgets connecting the playback and the capture pipelines
when both are active.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260204081833.16630-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Aggregated DAI widgets exist in topology for representation and are not
actually initialized in the firmware. But in preparation for using this
as a virtual DAI for loopback capture, make sure that we can traverse
the path from an aggregated DAI widget to the host widget.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260204081833.16630-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A tone generator module can be a type of processing module with no input
pins. Adjust the logic to set the reference params for selecting output
format and the basecfg format based on the output format.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260204081833.16630-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Parse the pipeline direction from topology. The direction_valid token is
required for backward-compatibility with older topologies that may not
have the direction set for pipelines. This will be used when
setting up pipelines to check if a pipeline is in the same direction as
the requested params and skip those in the opposite direction like in
the case of echo reference capture pipelines during playback.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260204081833.16630-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Widgets are set up in 2 steps, first ipc_prepare followed by the actual
IPC sent to the DSP to set up the widget. Split these 2 steps to do the
ipc_prepare during hw_params and the setting up in the prepare callback.
This will allow for future modifications to pipeline set up to be split
up between the FE and BE DAI prepare ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260204081833.16630-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new host_config op in struct sof_ipc_tplg_ops and define it for
IPC4. This will be used to configure the host widget during prepare
after a suspend/resume or after an xrun.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260204081833.16630-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Currently, hda_sdw_bpt_dma_prepare() get a HDA stream and use the link
DMA but doesn't reserve it. It works fine because we assume the
SwoundWire BPT will not run with audio streams simultaneously. Create
and use the new helpers to reserve the link DMA and allow running BPT
and audio stream simultaneously.
Pierre adds:
For the record this solution has two issues not documented in any commit
message:
a) this will not work in 'dspless' mode, where the link DMA is not
enabled. That's probably fine given that no one used that mode in
production, but that's a software restriction that you will not be able
to undo.
b) this raise the question of how bandwidth will be managed. The premise
of BPT is that it uses all the bus bandwidth to guarantee predictable
firmware download times. If the available bandwidth is restricted by
other audio streams, then mechanically the startup latency will be
increased and vary - or you will have to run the bus at a higher
frequency to provision enough bandwidth for BPT but that means higher
power consumption. Or you will have to change the bus clock dynamically
which is possible at the hardware level for SDCA parts but not legacy
ones.
I am not going to lay on the tracks for this low-level set of changes,
but you'll have to address the b) opens for future contributions.
If SDCA property is not present in the DisCo table, assume it
is present. This allows DAI links to be created from codec_info_list
instead of being skipped.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260203095923.3741674-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code test if (bt_link_mask_override) to overwrite the BT
link mask. This doesn't allow user to disable the BT link mask. User may
want to disable the BT link when it is detected by the NHLT.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20260203111545.3742255-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the SoundWire BPT stream uses the paired link DMA but not
reserve it. It works without any issue because we assume the SoundWire
BPT will not run with audio streams simultaneously.
To support simultaneous audio and BPT streams, we need to use the
hda_dma_prepare/cleanup helpers to reserve the pair link host DMA.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20260203114027.3742558-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SoundWire BPT stream needs to use link and host DMAs. Thus we need
helpers to prepare and cleanup the link and host DMAs. Currently the
SoundWire BPT stream uses hda_cl_prepare/cleanup helpers. It works fine
because we assume the SwoundWire BPT will not run with audio streams
simultaneously. The new helpers are copied from hda_cl_prepare/cleanup
and add a flag to reserve the paired host and link DMAs. The new helpers
will be used by both code loader and SoundWire BPT.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20260203114027.3742558-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, hda_dsp_stream_get/put are used to get/put the host dma.
However, we may want to use a hda stream that both host and link dma are
available. Add helper to find the hda stream and reserve/release it.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20260203114027.3742558-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The link_mask variable is not changed after setting to
hdev->info.link_mask until it is used for another purpose to get the
used SoundWire links and set to mach->mach_params.links. Besides, the
link_mask variable should be reset before any link id is added to the
link_mask. To fix the issue above and avoid confusing, use the
hdev->info.link_mask variable directly to check if the SoundWire link
is enabled.
Fixes: 5226d19d4c ("ASoC: SOF: Intel: use sof_sdw as default SDW machine driver")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260203072405.3716307-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for Nova Lake (NVL).
The core count for NVL is different compared to NVL-S (4 vs 2)
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260120193507.14019-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sofdep no longer works due to the reworked HDA audio stack and
it was an incorrect way to try to work around system security
policy blocking request_module use, even if they are legitimate.
Drop the softdep to stop the whack-a-mole hacking around system
configuration issues.
Revert "ASoC: SOF: Intel: hda: add softdep pre to snd-hda-codec-hdmi module"
This reverts commit 33b7dc7843.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20260120081935.11005-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Sascha Hauer <s.hauer@pengutronix.de>:
These are some patches for the tlv320adcx140 codec we are carrying
around for a while, time to upstream them.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Only code refactoring, and no behavior change.
Replace most of the manual *lock/*unlock handling with guard use.
Add of_ipc4_widget_setup_msg_payload() for adding struct
sof_ipc4_module_init_ext_init payload with associated objects. The
function allocates memory for the additional payload, sets up the
payload according to data collected from topology, and copies
pre-encoded module specific payload after the ext_init payload. The
function is called in sof_ipc4_widget_setup().
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260112113221.4442-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add dp_domain_id, dp_heap_bytes and dp_stack_bytes to struct
snd_sof_widget and fill the values from topology tuples with
SOF_TKN_COMP_DOMAIN_ID, SOF_TKN_COMP_STACK_BYTES_REQUIREMENT and
SOF_TKN_COMP_HEAP_BYTES_REQUIREMENT tokens.
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260112113221.4442-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace the manual spinlock lock/unlock pairs with guard().
Only code refactoring, and no behavior change.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20260112101004.7648-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace the manual spinlock lock/unlock pairs with guard().
Only code refactoring, and no behavior change.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20260112101004.7648-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace the manual spinlock_irqsave lock/unlock pairs with guard().
Only code refactoring, and no behavior change.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20260112101004.7648-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace the manual spinlock_irqsafe lock/unlock pairs with guard().
Only code refactoring, and no behavior change.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20260112101004.7648-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace the manual spinlock_irq lock/unlock pairs with guard().
Only code refactoring, and no behavior change.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20260112101004.7648-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace the manual mutex lock/unlock pairs with guard()/scoped_guard().
Only code refactoring, and no behavior change.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20260112101004.7648-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace the manual mutex lock/unlock pairs with guard()/scoped_guard().
Only code refactoring, and no behavior change.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20260112101004.7648-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:
This series provides several fixes and cleanup patches for the Nuvoton
NAU88L21 audio codec driver.
Testing and validation has been performed on Valve Steam Deck.
We need to distinguish the topologies with and without BT PCM.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251219034937.3630569-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
We support bytes control type for set and get, but these are module specific
controls and there is no way to handle notifications from them in a generic way.
Each control have module specific param_id and this param_id is only valid in
the module's scope, other modules might use the same id for different functions
for example.
This series will add a new generic control type, similar to the existing ones
for ENUM and SWITCH, which can be used to create bytes controls which can send
notifications from firmware on change.
The new param_id is 202 and the sof_ipc4_control_msg_payload is updated to
describe bytes payload also.
On set, the payload must include the sof_ipc4_control_msg_payload struct with
the control's ID and data size, followed by the data.
On get, the kernel needs to send the sof_ipc4_control_msg_payload struct along
with the LARGE_CONFIG_GET message as payload with the ID of the control that
needs to be retrieved. The raw data is received back without additional header.
A notification might contain data, in this case the num_elems reflects the size
in bytes, or without data. If no data is received then the control is marked as
dirty and on read the kernel will refresh the data from firmware.
The series includes mandatory fixes for existing code and adds support for
sending payload with LARGE_CONFIG_GET when the param_id is either generic ENUM,
SWITCH or BYTES control.
The generic byte control can be used in cases when the bytes data can be
changed by the firmware and it sends a notification about the change,
similarly to the enum and switch controls.
The generic control support is needed as from the param_id itself it is
not possible to know which control has changed. The needed information
is only available via generic control change notification.
Generic bytes controls use param_id 202 and their change notification can
contain payload with the change embedded or just the header message as
notification.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20251217143945.2667-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently IPC4 only supports module specific custom bytes controls, where
each control's param_id is module specific.
These bytes controls cannot be handled in a generic way, there is no clean
way to support for example notifications from firmware when their data
has been changed.
Add definition for generic bytes control which should be handled in a
similar way as the enum/switch controls.
The generic param id for BYTES is selected to be 202
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20251217143945.2667-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are message types when we would need to send a payload along with
the LARGE_CONFIG_GET message to provide information to the firmware on
what data is requested.
Such cases are the ALSA Kcontrol related messages when the high level
param_id tells only the type of the control, but the ID/index of the exact
control is specified in the payload area.
The caller must place the payload for TX before calling the set_get_data()
and this payload will be sent alongside with the message to the firmware.
The data area will be overwritten by the received data from firmware.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20251217143945.2667-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the param_id in extension based on the information we got from the
topology.
If the payload did not present then the param_id will remain 0.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20251217143945.2667-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the bytes data is read from the firmware, the size of the payload
can be different than what it was previously.
For example when the topology did not contained payload data at all for the
control, the data size was 0.
For get operation allow maximum size of payload to be read and then update
the sizes according to the completed message.
Similarly, keep the size in sync when updating the data in firmware.
With the change we will be able to read data from firmware for bytes
controls which did not had initial payload defined in topology.
Fixes: a062c8899f ("ASoC: SOF: ipc4-control: Add support for bytes control get and put")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20251217143945.2667-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The size of the data behind scontrol->ipc_control_data is stored in
scontrol->size, use this when copying data for backup/restore.
Fixes: db38d86d0c ("ASoC: sof: Improve sof_ipc4_bytes_ext_put function")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20251217143945.2667-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The size of the data behind of scontrol->ipc_control_data for bytes
controls is:
[1] sizeof(struct sof_ipc4_control_data) + // kernel only struct
[2] sizeof(struct sof_abi_hdr)) + payload
The max_size specifies the size of [2] and it is coming from topology.
Change the function to take this into account and allocate adequate amount
of memory behind scontrol->ipc_control_data.
With the change we will allocate [1] amount more memory to be able to hold
the full size of data.
Fixes: a382082ff7 ("ASoC: SOF: ipc4-topology: Add support for TPLG_CTL_BYTES")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20251217143945.2667-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the bytes control have no data (payload) then there is no need to send
an IPC message as there is nothing to send.
Fixes: a062c8899f ("ASoC: SOF: ipc4-control: Add support for bytes control get and put")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20251217143945.2667-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The introduction of 8bit and FLOAT formats missed to cover the
new corner cases they cause when the NHLT blobs are looked up.
The two patch in this series fixes the 8bit and FLOAT format caused
cases to be able to find the correct blob from NHLT.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
support for NVL-S and the support using functional topology fragments for
Soundwire configurations is introduced in 6.19-rc1 in parallel.
The SOF projects plan is to not create individual topology files for NVL
as with SDCA and the functional topology support can handle most if not
all soundwire devices going forward.
However one issue have been identified with the functional topology only
support, which was masked by the presence of a single topology file:
if the device contains a dai link for which we don't have topology fragment,
then the probe will fail.
This worked with a fallback to a monolithic topology file - which made the
dai link to be ignored.
The first patch in the series adds a flag to instruct the function discovery
to make a best effort to form a card by ignoring functions without
corresponding fragment (and print this out for developers) in case there
is no fallback topology available.
The second patch removes the match entry to refer to a topology file which
will not be built by the SOF project.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
On system suspend / resume we always power up the DSP and boot the
firmware, which is not strictly needed as right after the firmware booted
up we power the DSP down again on suspend and we also power it down after
resume after some inactivity.
Similarly, on jack insert/removal we needlesly boot up the firmware to check
the jack status, which needs no DSP/firmware communication.
The on-demand DSP boot will make sure that we boot the DSP firmware up only
when it is needed - for audio activity, in other cases the firmware will be
not booted up, which saves time.
Out of caution, add a new platform descriptor flag to enable on-demand
DSP boot since this might not work without changes to platform code on
certain platforms.
With the on-demand dsp boot enabled we will not boot the DSP and firmware
up on system or rpm resume, just enable audio subsystem since audio IPs,
like HDA and SoundWire might be needed (codecs suspend/resume operation).
Only boot up the DSP during the first hw_params() call when the DSP is
really going to be needed.
In this way we can handle the audio related use cases:
normal audio use (rpm suspend/resume)
system suspend/resume without active audio
system suspend/resume with active audio
system suspend/resume without active audio, and audio start before the rpm
suspend timeout
Add module option to force the on-demand DSP boot to allow it to be
disabled or enabled without kernel change for testing.
The on-demand boot has been tested in our CI for more than half a year
and so far no issues have been seen on supported platforms since it's
introduction to our development tree (sof-dev).
IPC4 is using the NHLT blob itself and sends the SSP blob from it directly
to the firmware, there is no need for the MCLK quirk based on the SSP blob
since the SSP blob is in use.
At the same time reword the error, info and debug messages for clarity.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Balamurugan C <balamurugan.c@intel.com>
Link: https://patch.msgid.link/20251215130819.31218-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
While the used GML is consistent with the pattern for other Intel * Lake
SoCs, the de facto use is GLK. Update the acronym and users accordingly.
Note, a handful of the drivers for Gemini Lake in the Linux kernel use
GLK already (LPC, MEI, pin control, SDHCI, ...) and even some in ASoC.
The only ones in this patch used the inconsistent one.
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20251212181742.3944789-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When there is no fallback possibility available for the function topology
use it is better to try to create a profile for the card in best effort
manner, leaving out non supported links for example.
As an example: some laptops present SSPx-BT link but we don't have fragment
yet to support this. If we only have support for functional topology
without monolithic fallback then we would fail the card creation.
The reason why the monolithic topology works on the same device is that it
does not have the SSPx-BT link handled, it is ignored.
In case when there is no fallback possibility we should try to create the
card with links that we support as best effort instead of failing and
leaving the user without a card.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251215101036.9370-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
NVL-S can be used with on-demand DSP booting, set the flag to enable it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251215132946.2155-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PTL and WCL can be used with on-demand DSP booting, set the flag to
enable it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20251215132946.2155-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
LNL can be used with on-demand DSP booting, set the flag to enable it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20251215132946.2155-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If on-demand DSP boot is used we need to make sure that the DSP is booted
up - which might not be the case - since we need ChainDMA in normal, non
DSPless mode for the BRA to work.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20251215132946.2155-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the introduction of on-demand DSP boot the rpm status not necessary
tells that the DSP firmware is booted up.
Introduce the sof_client_boot_dsp() which can be used to make sure that
the DSP is booted and it can handle IPCs.
Update the client drivers to use the new function where it is expected that
the DSP is booted up.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20251215132946.2155-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On system suspend / resume we always power up the DSP and boot the
firmware, which is not strictly needed as right after the firmware booted
up we power the DSP down again on suspend and we also power it down after
resume after some inactivity.
Out of caution, add a new platform descriptor flag to enable on-demand
DSP boot since this might not work without changes to platform code on
certain platforms.
With the on-demand dsp boot enabled we will not boot the DSP and firmware
up on system or rpm resume, just enable audio subsystem since audio IPs,
like HDA and SoundWire might be needed (codecs suspend/resume operation).
Only boot up the DSP during the first hw_params() call when the DSP is
really going to be needed.
In this way we can handle the audio related use cases:
normal audio use (rpm suspend/resume)
system suspend/resume without active audio
system suspend/resume with active audio
system suspend/resume without active audio, and audio start before the rpm
suspend timeout
Add module option to force the on-demand DSP boot to allow it to be
disabled or enabled without kernel change for testing.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20251215132946.2155-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Test earlier for the existence of ext_volatile_get callback and if it is
missing, skip the rpm calls to avoid needles DSP power on.
No change in functionality, we just skip the DSP power on in the unlikely
case when the ext_volatile _get is not supported and yet the topology adds
such control.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20251215132946.2155-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The initial library loading is happening during topology loading, which is
already protected with pm_runtime_resume_and_get() via pcm.c
The redundant rpm code can be dropped from sof_ipc4_load_library()
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20251215132946.2155-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The default topology path for IPC4 is intel/sof-ipc4-tplg with a symlink
to it as intel/sof-ace-tplg to support old kernels.
sof-bin has been released in this manner for almost two years now, it is
time to change the default path for MTL family.
Link: https://thesofproject.github.io/latest/getting_started/intel_debug/introduction.html#topology-file
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20251215130805.31146-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, we send all channels to all amps and copy the channel_mask
to all ALH DMAs in playback. However, the amp may not have the
capability to run any process and SOF may need to split the channels
and send specific data channel to each amp. In that case, we need
to split the channel_mask in ALH DMA.
Copy the channel mask only if the widget channel count is the same
the FE channels for playback, otherwise, split the channels among the
aggregated DAIs. Like what we did in capture.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251215130723.31081-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add some context to the error prints when sink or source widget is not
found by printing the name of the other side of the connection.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251215130741.31106-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SSP/DMIC blobs have no support for FLOAT type, they are using S32 on data
bus.
Convert the format from FLOAT_LE to S32_LE to make sure that the correct
format is used within the path.
FLOAT conversion will be done on the host side (or within the path).
Fixes: f7c41911ad ("ASoC: SOF: ipc4-topology: Add support for float sample type")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251215120648.4827-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the introduction of 8-bit formats the DMIC blob lookup also needs to
be modified to prefer the 32-bit blob when 8-bit format is used on FE.
At the same time we also need to make sure that in case 8-bit format is
used, but only 16-bit blob is available for DMIC then we will not try to
look for 8-bit blob (which is invalid) as fallback, but for a 16-bit one.
Fixes: c04c2e8296 ("ASoC: SOF: ipc4-topology: Add support for 8-bit formats")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251215120648.4827-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Support for multiple sections in a BPT stream
- Aligning DMA frame with BPT frames
- Qualcomm: support for v3.1.0 controllers
-----BEGIN PGP SIGNATURE-----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=tDi0
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.19-rc1_updated' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Support for multiple sections in a BPT stream
- Align DMA frame with BPT frames
- Qualcomm support for v3.1.0 controllers
* tag 'soundwire-6.19-rc1_updated' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_ace2x: handle multi BPT sections
soundwire: pass sdw_bpt_section to cdns BPT helpers
soundwire: introduce BPT section
soundwire: intel_ace2x: add fake frame to BRA read command
soundwire: cadence_master: add fake_size parameter to sdw_cdns_prepare_read_dma_buffer
ASoC: SOF: Intel: export hda_sdw_bpt_get_buf_size_aligment
soundwire: cadence: export sdw_cdns_bpt_find_bandwidth
soundwire: cadence_master: set data_per_frame as frame capability
soundwire: only compute BPT stream in sdw_compute_dp0_port_params
soundwire: cadence_master: make frame index trace more readable
soundwire: qcom: adding support for v3.1.0
dt-bindings: soundwire: qcom: Document v3.1.0 version of IP block
soundwire: qcom: prepare for v3.x
soundwire: qcom: deprecate qcom,din/out-ports
dt-bindings: soundwire: qcom: deprecate qcom,din/out-ports
soundwire: qcom: remove unused rd_fifo_depth
of: base: Add of_property_read_u8_index
The dma buffer need to be a multiple of data block size and
the fifo size. Export a function to return the LCM of data
block size and the fifo size.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251014031450.3781789-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This is a very large set of updates, as well as some more extensive
cleanup work from Morimto-san we've also added a generic SCDA class
driver for SoundWire devices enabling us to support many chips with
no custom code. There's also a batch of new drivers added for both
SoCs and CODECs.
- Added a SoundWire SCDA generic class driver, pulling in a little
regmap work to support it.
- A *lot* of cleaup and API improvement work from Morimoto-san.
- Lots of work on the existing Cirrus, Intel, Maxim and Qualcomm
drivers.
- Support for Allwinner A523, Mediatek MT8189, Qualcomm QCM2290,
QRB2210 and SM6115, SpacemiT K1, and TI TAS2568, TAS5802, TAS5806,
TAS5815, TAS5828 and TAS5830.
This also pulls in some gpiolib changes supporting shared GPIOs in the
core there so we can convert some of the ASoC drivers open coding
handling of that to the core functionality.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmkt6lUACgkQJNaLcl1U
h9D7dgf+JP2+yZIeRBud7CEO4Docda2uoRssT7GAIY/Rqrpem5FI0c0pWyZISvhn
scyjkoCrQfHEoeYrtC3l5bDI7F8o5Tc91hGzhJiCi3mb8jSwi+CaNIpR0Cet3epV
B9wQgzxlxbmKCxJRUYTPQF3n1uBJWc5EBHSc5QPddTZ0vdUfSlX0FAKHsabpmaOC
TpkdJnOlH8WUokmP3kP3TpzlflmOSLehnWX4BelJe5Os5O0PQpiKh/JG3oCYHSmc
yEbzCjOaya80HHn11FShOpy+B4b6sLUMcN+CAmDiLAdNFGvvjgmjpwwZtLYAm09Z
zFhN7XuVk1vXf+Zx/jHqYKaZtvvAsQ==
=Xwls
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.19
This is a very large set of updates, as well as some more extensive
cleanup work from Morimto-san we've also added a generic SCDA class
driver for SoundWire devices enabling us to support many chips with
no custom code. There's also a batch of new drivers added for both
SoCs and CODECs.
- Added a SoundWire SCDA generic class driver, pulling in a little
regmap work to support it.
- A *lot* of cleaup and API improvement work from Morimoto-san.
- Lots of work on the existing Cirrus, Intel, Maxim and Qualcomm
drivers.
- Support for Allwinner A523, Mediatek MT8189, Qualcomm QCM2290,
QRB2210 and SM6115, SpacemiT K1, and TI TAS2568, TAS5802, TAS5806,
TAS5815, TAS5828 and TAS5830.
This also pulls in some gpiolib changes supporting shared GPIOs in the
core there so we can convert some of the ASoC drivers open coding
handling of that to the core functionality.
Linux supports NXP's LMM SCMI protocol so switch to using the appropriate
API. The SIPs were intended to act as placeholders until the support for
said protocol was upstreamed.
The underlying CPU protocol command from IMX_SIP_SRC_M_RESET_ADDR_SET is
replaced by a LMM protocol command with the same effect (i.e. setting the
boot address) since using the CPU protocol would require additional
permissions (which TF-A already had). Apart from this, the SIPs are
replaced by their equivalent Linux LMM commands.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://patch.msgid.link/20251114143503.2139-1-laurentiumihalcea111@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for Nova Lake S (NVL-S).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251104121650.21872-6-peter.ujfalusi@linux.intel.com
For those amp with "AMP" name_prefix in the codec_info_list[], use the
AMP<index> format to meet the UCM expectation.
Fixes: 5cd5f8fc29 ("ASoC: SOF: Intel: add hyphen between name and index to amp name_prefix")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251030065503.1216419-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "ASoC: SOF: Intel: use sof_sdw as default SDW machine driver" commit
uses asoc_sdw_get_codec_info_list_count() and codec_info_list[] in the
hda_sdw_machine_select() function. Select SND_SOC_SDW_UTILS to fix the
function undefined issue.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202510220819.KrN5gjKL-lkp@intel.com/
Fixes: 5226d19d4c ("ASoC: SOF: Intel: use sof_sdw as default SDW machine driver")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251029040344.1116201-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
User space (alsa-lib) uses the PCM device name to detect HDMI devices, the
name is expected to be in form of 'HDMI'+<space>+number.
The PCM device name is not configured in ASoC, only the PCM id is set based
on the loaded topology.
Detect the HDMI PCM playback devices and configure the name to help user
space to handle HDMI PCMs correctly.
aplay -l | grep HDMI (Audio capable monitor connected)
Before the change:
card 0: sofhdadsp [sof-hda-dsp], device 3: HDMI1 (*) []
card 0: sofhdadsp [sof-hda-dsp], device 4: HDMI2 (*) []
card 0: sofhdadsp [sof-hda-dsp], device 5: HDMI3 (*) []
after the change:
card 0: sofhdadsp [sof-hda-dsp], device 3: HDMI1 (*) [DELL P1917S]
card 0: sofhdadsp [sof-hda-dsp], device 4: HDMI2 (*) [HDMI 2]
card 0: sofhdadsp [sof-hda-dsp], device 5: HDMI3 (*) [HDMI 3]
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251029105134.1342-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function topology feature, and the plat_data->machine field that
specifies this feature, is ACPI specific. The check didn't take this
into consideration, which causes a NULL pointer dereference splat on
OF platforms:
BUG: KASAN: null-ptr-deref in sof_create_ipc_file_profile (sound/soc/sof/fw-file-profile.c:291 sound/soc/sof/fw-file-profile.c:340) snd_sof
Read of size 8 at addr 00000000000000c8 by task (udev-worker)/247
CPU: 7 UID: 0 PID: 247 Comm: (udev-worker) Not tainted 6.18.0-rc2-next-20251023-03804-g93b191bc0c26-dirty #747 PREEMPT ba3c303a11d89508de4087cb5b4f8985b6d87b6f
Hardware name: Google Ciri sku2 board (DT)
Call trace:
[KASAN stuff]
sof_create_ipc_file_profile (sound/soc/sof/fw-file-profile.c:291 sound/soc/sof/fw-file-profile.c:340) snd_sof
snd_sof_device_probe (sound/soc/sof/core.c:304 sound/soc/sof/core.c:388 sound/soc/sof/core.c:460 sound/soc/sof/core.c:719) snd_sof
sof_of_probe (sound/soc/sof/sof-of-dev.c:84) snd_sof_of
platform_probe (drivers/base/platform.c:1405)
[...]
Check that the ACPI specific field is actually valid before accessing
it.
This was seen on a MediaTek based Chromebook.
Fixes: 2b92b98cc4 ("ASoC: SOF: Don't print the monolithic topology name if function topology may be used")
Cc: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251023061226.1127345-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
For those amps that use their name as name prefix the amp id should be
added after a hyphen symbol. Like "rt1320-1".
Fixes: 5226d19d4c ("ASoC: SOF: Intel: use sof_sdw as default SDW machine driver")
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251021065700.130810-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Currently, we create a ACPI mach table for every new audio
configuration. And all Intel SOF SoundWire configurations point to the
same sof_sdw machine driver. Also, we don't need a specific topology for
a coufguration, we can use the function topology instead. That give us a
change to generate an ACPI mach table based on the SoundWire codec
information reported by the ACPI table and use the sof_sdw machine
driver as the default machine driver.
This will reduce the effort to support a new Intel SOF SoundWire audio
configuration.
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
system_wq is a per-CPU worqueue, replaced by system_percpu_wq. Despite that,
system_wq in this change has been replaced by system_dfl_wq, because there
aren't per-cpu variables.
The old wq will be kept for a few release cylces.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20250929155053.400342-2-marco.crivellari@suse.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If there is no SoundWire machine matches the existing acpi match table,
get the required machine data from the acpi table and construct the
link adrs and endpoints. Pass the data to the default Intel SoundWire
machine driver. And we don't need to add new item to the acpi match
table in common cases.
We will construct a dummy topology name. The dummy topology is just
used to extract the platform name for function topology and should not
be used.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20251009094023.3474895-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Monolithic topology is not needed if function topology is used. Instead
of creating a dummy topology in the file system, we can skip the
existence check in the kernel.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20251009094023.3474895-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The platform name will be used construct the topology name.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251009094023.3474895-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It may confuse people if "Topology file:" is printed but the topology
file is not really used. We keep the print if the topology file is
missing thus user can know what topology is missed in the file system.
And increase the log level to info for the actual topology that is used.
So that user can get which topology is used.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251009094023.3474895-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A small pile of fixes, almost all for the Intel and SOF code surrounding
management of the host buffer. We've also got one fix for Meson and new
device IDs and quirk supporting the RT722VB.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmjmTE8ACgkQJNaLcl1U
h9AlNQf/X6gfxxDNmzmeekRxtaTOzgKk4m45xhommQ7+/9qfoDRlcljv4tBVlMgf
eijgyqjDa5uNXSseUyCyj7/Fn0+Znf7u0TMhWXaqt2E6lkT+YrDqXJ/orMkamr29
5AraOezP7lC+S5wiOtsGDC8sfXkAKI1gZXOD3IibVJN+yu2idf1b/cAUhl2URsMY
WJUK9lPr86sjrKJnaEjYAQbwADWpof3LDZ0DjzVbusaRMcVus6FU6oOUmqkXeYJ6
jQUmyzWjy1foN7Wf3BE2SWKzRAjjL0lystf2BD7P1Rg1wDLExzmCQda97eyQvQNM
BzlwNTAniDdES8wS/lp0+ltbVOKtZw==
=aUEh
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.18-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.18
A small pile of fixes, almost all for the Intel and SOF code surrounding
management of the host buffer. We've also got one fix for Meson and new
device IDs and quirk supporting the RT722VB.
It is allowed to mix Link and Host DMA channels in a way that their index
is different. In this case we would read the LLP from a channel which is
not used or used for other operation.
Such case can be reproduced on cAVS2.5 or ACE1 platforms with soundwire
configuration:
playback to SDW would take Host channel 0 (stream_tag 1) and no Link DMA
used
Second playback to HDMI (HDA) would use Host channel 1 (stream_tag 2) and
Link channel 0 (stream_tag 1).
In this case reading the LLP from channel 2 is incorrect as that is not the
Link channel used for the HDMI playback.
To correct this, we should look up the BE and get the channel used on the
Link side.
Fixes: 67b182bea0 ("ASoC: SOF: Intel: hda: Implement get_stream_position (Linear Link Position)")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251002074719.2084-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a sanity check for the calculated delay value before reporting it to
the application. If the value is clearly invalid, emit a rate limited
warning to kernel log and return a zero delay. This can occur e.g if the
host or link DMA hits a buffer over/underrun condition.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251002074719.2084-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add dev_dbg_ratelimited() wrapper for snd_sof_pcm specific debug prints
that needs rate limited.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251002074719.2084-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The size of the DSP host buffer was incorrectly defined as 2ms while
it is 4ms and the ChainDMA PCMs are using 5ms as host facing buffer.
The constraint will be set against the period time rather than the buffer
time to make sure that application will not face with xruns when the
DMA bursts to refill the host buffer.
The minimal period size will be also used by Pipewire in case of SOF
cards to set the headroom to a length which will avoid the cases when
the hw_ptr jumps over the appl_ptr because of a burst.
Iow, it will make Pipewire to keep a safe distance from the hw_ptr.
https://github.com/thesofproject/linux/issues/5284https://gitlab.freedesktop.org/pipewire/wireplumber/-/merge_requests/740https://gitlab.freedesktop.org/pipewire/pipewire/-/merge_requests/2548
Instead of constraining the ALSA buffer time to be double of the firmware
host buffer size, it is better to set it for the period time.
This will implicitly constrain the buffer time to a safe value
(num_periods is at least 2) and prohibits applications to set smaller
period size than what will be covered by the initial DMA burst.
Fixes: fe76d2e75a ("ASoC: SOF: Intel: hda-pcm: Use dsp_max_burst_size_in_ms to place constraint")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251002135752.2430-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For ChainDMA the firmware allocates 5ms host buffer instead of the standard
4ms which should be taken into account when setting the constraint on the
buffer size.
Fixes: 842bb8b62c ("ASoC: SOF: ipc4-topology: Save the DMA maximum burst size for PCMs")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251002135752.2430-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The firmware has changed the minimum host buffer size from 2 periods to
4 periods (1 period is 1ms) which was missed by the kernel side.
Adjust the SOF_IPC4_MIN_DMA_BUFFER_SIZE to 4 ms to align with firmware.
Link: f0a14a3f41
Fixes: 594c1bb9ff ("ASoC: SOF: ipc4-topology: Do not parse the DMA_BUFFER_SIZE token")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251002135752.2430-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Assumption that chain DMA module starts the link DMA when 1ms of
data is available from host is not correct. Instead the firmware
chain DMA module fills the link DMA with initial buffer of zeroes
and the host and link DMAs are started at the same time.
This results in a small error in delay calculation. This can become a
more severe problem if host DMA has delays that exceed 1ms. This results
in negative delay to be calculated and bogus values reported to
applications. This can confuse some applications like
alsa_conformance_test.
Fix the issue by correctly calculating the firmware chain DMA
preamble size and initializing the start offset to this value.
Cc: stable@vger.kernel.org
Fixes: a1d203d390 ("ASoC: SOF: ipc4-pcm: Enable delay reporting for ChainDMA streams")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251002074719.2084-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
