A standard set of driver-specific fixes and quirks accumulated since
the merge window:
ASoC:
- SOF: Sanity check to prevent OOB reads
- rsnd: Fix clock leak and double-disable issues with PM
- tas675x: Misc fixes for register fields, etc
- lpass-va-macro: Correct codec version for Qualcomm SC7280
- amd-yc: DMIC quirk for Alienware m15 R7 AMD
Others:
- us144mkii: Fix a UAF on disconnect and anchor list corruption
- HD-audio: Realtek quirks for HP models
-----BEGIN PGP SIGNATURE-----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=eXcj
-----END PGP SIGNATURE-----
Merge tag 'sound-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A standard set of driver-specific fixes and quirks accumulated since
the merge window:
ASoC:
- SOF: Sanity check to prevent OOB reads
- rsnd: Fix clock leak and double-disable issues with PM
- tas675x: Misc fixes for register fields, etc
- lpass-va-macro: Correct codec version for Qualcomm SC7280
- amd-yc: DMIC quirk for Alienware m15 R7 AMD
Others:
- us144mkii: Fix a UAF on disconnect and anchor list corruption
- HD-audio: Realtek quirks for HP models"
* tag 'sound-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: rsnd: src: Add missing scu_supply clock to suspend/resume
Documentation: sound: tas675x: Fix temperature range and impedance documentation
ASoC: codecs: tas675x: Fix CHx temperature range register bit fields
ASoC: codecs: tas675x: use READ_ONCE for params to be used concurrently
ASoC: rsnd: adg: make rsnd_adg_clk_control() idempotent
ASoC: SOF: validate probe info element counts
ALSA: usx2y: us144mkii: fix work UAF on disconnect
ASoC: amd: yc: Add Alienware m15 R7 AMD to DMIC quirk table
ALSA: hda/realtek: Add quirk for HP Victus 16-e0xxx (88EE) to enable mute LED
MAINTAINERS: ASoC: SOF: add AMD reviewer for Sound Open Firmware
ASoC: codecs: lpass-va-macro: Fix LPASS Codec Version for SC7280
ALSA: us144mkii: capture_urb_complete: redundant usb_anchor_urb corrupts anchor list on each resubmission
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Probe information replies contain a firmware-provided element count. IPC3
uses that count to copy an array, then returns the unchecked count to its
caller. A short reply can therefore make the caller walk beyond the copied
array.
IPC4 similarly uses the count both to allocate the destination array and
to walk the reply. On 32-bit systems the allocation size can wrap, while on
all systems an excessive count reads beyond the reply payload.
Validate each count against the actual reply size before copying or
allocating the array, and use kcalloc() for the IPC4 allocation.
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Link: https://patch.msgid.link/20260628000329.18606-1-alhouseenyousef@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the topology filename contains "dummy" and tplg_cnt is 0, the
function returns -EINVAL directly without freeing the tplg_files
allocated by kcalloc() at line 2497. This leaks memory on every
such topology load attempt.
Fix this by setting ret = -EINVAL and jumping to the out: label,
which already handles the kfree(tplg_files) cleanup.
Fixes: 99c159279c ("ASoC: SOF: don't check the existence of dummy topology")
Cc: stable@vger.kernel.org
Signed-off-by: Zhao Dongdong <zhaodongdong@kylinos.cn>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/tencent_3EED6D778DC52C3703A2D1EE8119372E8E08@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When SND_SOC_SOF_INTEL_LNL is set, SND_SOF_SOF_HDA_SDW_BPT must also
be enabled, in order to let the soundwire support call into it.
However, there are configurations with SND_SOF_SOF_HDA_SDW_BPT=m
and SND_SOF_SOF_HDA_SDW_BPT=m but SOUNDWIRE_INTEL=y, which still
lead to a link failure:
aarch64-linux-ld: drivers/soundwire/intel_ace2x.o: in function `intel_ace2x_bpt_wait':
intel_ace2x.c:(.text+0xfc8): undefined reference to `hda_sdw_bpt_wait'
aarch64-linux-ld: drivers/soundwire/intel_ace2x.o: in function `intel_ace2x_bpt_send_async':
intel_ace2x.c:(.text+0x1ff8): undefined reference to `hda_sdw_bpt_get_buf_size_alignment'
Address this by moving the 'select SND_SOF_SOF_HDA_SDW_BPT' into
SND_SOC_SOF_HDA_GENERIC.
Fixes: 614d416dd8 ("ASoC: SOF: Intel: hda-sdw-bpt: fix SND_SOF_SOF_HDA_SDW_BPT dependencies")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260611132310.137688-2-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When SND_SOC_SOF_HDA_GENERIC=y but SND_SOC_SOF_INTEL_SOUNDWIRE=m, the
SND_SOC_SDW_UTILS is also set to =m even though there is a direct link
dependency from the hda.c:
aarch64-linux-ld: sound/soc/sof/intel/hda.o: in function `hda_machine_select':
hda.c:(.text+0x21ac): undefined reference to `codec_info_list'
hda.c:(.text+0x241c): undefined reference to `asoc_sdw_get_dai_type'
hda.c:(.text+0x25b4): undefined reference to `asoc_sdw_get_codec_info_list_count'
hda.c:(.text+0x25d8): undefined reference to `asoc_sdw_get_codec_info_list_count'
Change this the same way as the other related 'select' statements
to allow linking against it.
Fixes: 2b4d53eb5c ("ASoC: SOF: Intel: select SND_SOC_SDW_UTILS in SND_SOC_SOF_HDA_GENERIC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Julian Braha <julianbraha@gmail.com>
Link: https://patch.msgid.link/20260611132310.137688-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_parse_token_sets() reads array->size while iterating over topology
private data. The loop condition only checks that some data remains, so a
malformed topology with a truncated trailing vendor array can make the
parser read the size field before a full vendor-array header is available.
Validate that the remaining private data contains a complete
snd_soc_tplg_vendor_array header before reading array->size.
The declared array size check also needs to remain signed. asize is an int,
but sizeof(*array) has type size_t, so comparing them directly promotes
negative asize values to unsigned and lets them pass the check,
as reported in the stable review thread reference below.
Cast sizeof(*array) to int when validating the declared array size. This
rejects negative, zero and otherwise too-small sizes before the parser
dispatches to the tuple-specific code.
Link: https://lore.kernel.org/stable/CANiDSCsjR5NHqu_Ui5cOqWdJgFqmYsQ9WR8O7m0WOhngaYXFpw@mail.gmail.com/t/#m9b3be379221e79327cc13fd71009287368ef4f23
Fixes: 215e5fe758 ("ASoC: SOF: topology: reject invalid vendor array size in token parser")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260603-sof-topology-array-size-signed-v1-1-84f97879a4ef@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Bard Liao <yung-chuan.liao@linux.intel.com> says:
This series sets is_amp to all amp type codecs in codec_info_list[].
So that we can use the flag directly instead of using a local flag to
check if the codec is an AMP type. The flag will be used to set
different name_prefix for amp and non-amp codecs.
Link: https://patch.msgid.link/20260605101805.121428-1-yung-chuan.liao@linux.intel.com
Now we set is_amp to all amp type codecs. We can use the flag directly
instead of using a local flag to check if the codec is an AMP type.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260605101805.121428-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Richard Fitzgerald <rf@opensource.cirrus.com> says:
These are for-next.
They are not urgent because it only leaks memory if the driver failed to
component_probe or is removed, which wouldn't happen in normal use.
This series fixes some memory leaks:
- The memory allocated by wm_adsp/cs_dsp was not freed.
- If component_probe() failed it didn't clean up.
The addition of this cleanup in patch #3 exposes an existing possible
double-free of the debugfs, which is fixed in patch #2.
Link: https://patch.msgid.link/20260610093432.557375-1-rf@opensource.cirrus.com
Only accept an ACPI machine table entry when machine_check is absent
or returns true, matching other AMD SoundWire machine select paths.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20260609144146.3311301-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ipc_control_data buffer is allocated as kzalloc(max_size), where
max_size covers the entire struct sof_ipc_ctrl_data including its
flexible array payload. However, the bounds checks in bytes_ext_put
and _bytes_ext_get compared user data lengths against max_size
directly, ignoring that cdata->data sits at an offset of
sizeof(struct sof_ipc_ctrl_data) bytes into the allocation.
This allowed writing up to sizeof(struct sof_ipc_ctrl_data) bytes past
the end of the heap buffer from unprivileged userspace via the ALSA TLV
kcontrol interface, and similarly allowed over-reading adjacent heap
data on the get path.
Fix all bounds checks to subtract sizeof(*cdata) from max_size so they
reflect the actual space available at the cdata->data offset. Also fix
the error-path restore in bytes_ext_put which wrote to cdata->data
instead of cdata, causing the same overflow.
Fixes: 67ec2a0916 ("ASoC: SOF: Add bytes_ext control IPC ops for IPC3")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260609083458.31193-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In sof_ipc3_bytes_put(), the size used for the memcpy is derived from
the old data->size already in the buffer, not the incoming new data's
size field. If the new data has a different size, the copy length is
wrong: it may truncate valid data or copy stale bytes.
Similarly, sof_ipc3_bytes_get() checks data->size against max_size
without accounting for the sizeof(struct sof_ipc_ctrl_data) offset
of the flex array within the allocation.
Fix bytes_put to validate and use the incoming data's sof_abi_hdr.size
from ucontrol before copying. Fix bytes_get to subtract sizeof(*cdata)
from the bounds check to match the actual available space.
Fixes: 544ac8858f ("ASoC: SOF: Add bytes_get/put control IPC ops for IPC3")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260609083458.31193-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In snd_sof_update_control(), firmware-provided cdata->num_elems is
checked against local_cdata->data->size but never against the actual
allocation size. If local_cdata->data->size was previously set to an
inconsistent value, the memcpy could write past the allocated buffer.
Add a bounds check to ensure num_elems fits within the available space
in the ipc_control_data allocation before copying.
Fixes: 10f461d79c ("ASoC: SOF: Add IPC3 topology control ops")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260609083458.31193-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In sof_ipc3_control_update(), the expected_size calculation uses
firmware-provided cdata->num_elems in arithmetic that could overflow
on 32-bit platforms, wrapping to a small value. This would allow the
cdata->rhdr.hdr.size comparison to pass with mismatched sizes,
potentially leading to out-of-bounds access in snd_sof_update_control.
Use check_mul_overflow() and check_add_overflow() to detect and reject
overflowed size calculations.
Fixes: 10f461d79c ("ASoC: SOF: Add IPC3 topology control ops")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260609083458.31193-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Validate MODULE_NOTIFICATION payload length before reading
bytes/channel data in control update handling.
Fixes: 2a28b5240f ("ASoC: SOF: ipc4-control: Add support for generic bytes control")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260609083458.31193-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In sof_ipc4_bytes_put(), the copy size is derived from the old
data->size in the buffer rather than the incoming new data's size
field from ucontrol. If the new data has a different size, the copy
uses the wrong length: it may truncate valid data or copy stale bytes.
Fix by validating and using the incoming data's sof_abi_hdr.size from
ucontrol before copying.
Fixes: a062c8899f ("ASoC: SOF: ipc4-control: Add support for bytes control get and put")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260609083458.31193-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Firmware will set dsp_ack to 1 when firmware sends response for the IPC
command issued by host. Similarly dsp_msg flag will be updated to 1.
During ACP D0 entry, the value read from the sof_dsp_ack_write scratch
flag can be uninitialized. A non-zero garbage value is treated as a
pending DSP IPC ack before SOF_FW_BOOT_COMPLETE, causing a spurious
"IPC reply before FW_BOOT_COMPLETE" log.
Fix the condition checks for ipc flags.
Fixes: 738a2b5e2c ("ASoC: SOF: amd: Add IPC support for ACP IP block")
Link: https://github.com/thesofproject/linux/pull/5642
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Tested-by: Umang Jain <uajain@igalia.com>
Link: https://patch.msgid.link/20260609160938.3717513-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some drivers want to use topology name, but currently each drivers are
setting it by own method.
This patch adds new snd_soc_card_set_topology_name() and do it by
same method.
Almost all driver doesn't set topology name, let's remove fixed name
array, and use devm_kasprintf() instead.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/878q942wce.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> says:
SRC can only change the rate, we can still allow different bit depth and
channels to be handled, the only restriction is that the input and output
must have matching bit depth and channel format.
In a separate patch do a sanity check for the number of formats on the
input and output side as SRC/ASRC must have at least one of them.
Link: https://patch.msgid.link/20260526105748.26149-1-peter.ujfalusi@linux.intel.com
The SRC module can only change the rate, it keeps the format and channels
intact, but this does not mean the num_output_formats must be 0:
The SRC module can support different formats/channels, we just need to
check if the output format lists the correct combination of out rate and
the input format/channels.
Change the logic to prioritize the sink_rate of the module as target rate,
then the rate of the FE in case of capture or in case of playback check the
single rate specified in the output formats.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20260526105748.26149-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SRC and ASRC modules must have at least one input and on one output formats
to be usable.
Do a sanity check during setup type and fail if either the number of input
or output formats are 0.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260526105748.26149-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch lets a capture PCM to operate with deep buffer
by taking dsp_max_burst_size_in_ms from topology if it is
defined. Earlier the value from topology was omitted for
capture.
If not defined, the maximum burst size for capture is set
similarly as before to one millisecond.
The dma_buffer_size is set similarly as for playback from
largest of deep_buffer_dma_ms or SOF_IPC4_MIN_DMA_BUFFER_SIZE
times OBS.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260522075659.2645-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
8 and 32 bit formats can have different types, print them in debug
information to have complete view of the supported formats.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260520150204.18303-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> says:
The USB Audio Offload (UAOL) can only be used from the DSP side and
on Lunar Lake (ACE2) and newer platforms the access to it's register
space must be granted by the host, just like for SSP or DMIC.
This series enable the offload for UAOL for LNL or newer devices.
Link: https://patch.msgid.link/20260520150639.25301-1-peter.ujfalusi@linux.intel.com
The handling of UAOL (USB Audio Offload Link) is similar to SSP and DMIC,
it is handled by the DSP firmware.
Set the offload enable for it similar to SSP and DMIC.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20260520150639.25301-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
hdac_bus_eml_enable_offload() can only fail in case the IP is not enabled
in the platform, which is not really an error as the ACE IP can be
configured differently when integrated into a specific SoC.
While it is unlikely, but it is a valid configuration that for example the
DMIC is disabled.
In this case we will just skip setting the offload for a link that is not
present.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20260520150639.25301-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If a kcontrol update comes to a control right at the same time when the
PCM containing the control is started up then there is a small window when
a race can happen:
while the widget is set up the swidget->setup_mutex is taken in topology
level and if the control update comes at this point, it will be stopped
within sof_ipc4_set_get_kcontrol_data() with the mutex and it will be
blocked until the swidget setup is done, which will clear the control's
IPC message payload.
To avoid such race, use local copy of the template IPC message instead of
the template directly. This will ensure data integrity in case of
concurrent updates during initialization.
Link: https://github.com/thesofproject/linux/issues/5734
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260520141349.9625-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> says:
The series address developer facing issues regarding to how the DSP core
count is handled:
IPC4 code ignored the DISABLE_MULTICORE flag, fixed by the first patch.
The second patch does a validation of the core index from topology
against the number of DSP cores available on the booted device, which makes
generic development topologies usable among different DSP variants without
failure.
Link: https://patch.msgid.link/20260520135514.32720-1-peter.ujfalusi@linux.intel.com
Generic development topologies can reference core id outside of the range
of the number of DSP cores the device might have.
Product families have different number of cores, for example:
Intel TGL has 4, TGL-H has 2, ADL has 4, ADL-S has 2, etc
The development topologies are tuned for the higher end devices and in this
case they will fail on DSP with less number of cores.
Override the out of range core id from topology to primary core and inform
the user about it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20260520135514.32720-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SOF_DBG_DISABLE_MULTICORE is handled for swidgets in topology.c but the
pipeline's core is not changed to primary core if the flag is set.
Check the flag and if it is set, force the pipeline core to primary core.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20260520135514.32720-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The smn_read_register() helper returns negative error codes on failure
or the register value on success. When used with read_poll_timeout(),
the return value is stored in the 'data' variable.
Currently 'data' is declared as u32, which causes negative error codes
to be cast to large positive values. This makes the condition 'data > 0'
incorrectly treat errors as success.
Fix by changing 'data' from u32 to int, matching the pattern used in
psp_mbox_ready() which correctly handles the same helper function.
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/linux-sound/agGES8vWrLOrBu28@stanley.mountain/
Fixes: f120cf33d2 ("ASoC: SOF: amd: Use AMD_NODE")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260511153638.724810-1-mario.limonciello@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
phucduc.bui@gmail.com <phucduc.bui@gmail.com> says:
This series converts spin lock handling in UniPhier AIO drivers
to use guard() helpers.
The changes are purely code cleanups with no functional impact.
Currently, the function topology provides the basic audio function. The
commit allow the users add their topologies to the topology list. So
they can add their own features.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260421091351.4056377-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
An empty adr_link is expected to terminate the
for (adr_link = mach_params->links; adr_link->num_adr; adr_link++) loop.
Allocate link_num + 1 links to add an empty adr_link.
Fixes: 5226d19d4c ("ASoC: SOF: Intel: use sof_sdw as default SDW machine driver")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260424105031.114053-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The platform name will be used in the topology name.
Fixes: d3df422f66 ("ASoC: SOF: Intel: add initial support for NVL-S")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260413060800.3156425-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The platform name will be used in the topology name.
Fixes: 1800bcdc68 ("ASoC: SOF: Intel: add support for Nova Lake NVL")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260413060800.3156425-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When reporting the pointer for a compressed stream we report the current
I/O frame position by dividing the position by the number of channels
multiplied by the number of container bytes. These values default to 0 and
are only configured as part of setting the stream parameters so this allows
a divide by zero to be configured. Validate that they are non zero,
returning an error if not
Fixes: c1a731c713 ("ASoC: SOF: compress: Add support for computing timestamps")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260326-asoc-compress-tstamp-params-v1-1-3dc735b3d599@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax <ckeepax@opensource.cirrus.com> says:
Another round of SDCA fixes a couple of fix to the IRQ cleanup
from Richard, and a minor tweak to the IRQ handling from me.
Intel ACE4 based products set more strict constraints on HDA BDLE start
address and length alignment. Add a constraint to align period size to
128 bytes.
The commit removes the "minimum as per HDA spec" comment. This comment
was misleading as spec actually does allow a 2 byte BDLE length, and
more importantly, period size also directly impacts how the BDLE start
addresses are aligned, so it is not sufficient just to consider allowed
buffer length.
Fixes: d3df422f66 ("ASoC: SOF: Intel: add initial support for NVL-S")
Cc: stable@vger.kernel.org
Reported-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20260408084514.24325-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
is_endpoint_present() iterates over sdca_data.num_functions, but checks
the dai_type according to codec info list, which will cause problems if
not all endpoints from the codec info list are present. Make sure the
type of actually present functions is compared against target dai_type.
Fixes: 5226d19d4c ("ASoC: SOF: Intel: use sof_sdw as default SDW machine driver")
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260402064531.2287261-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In case of missing endpoints, the sequential numbering will cause wrong
mapping. Instead, assign the original DAI index from codec_info_list.
Fixes: 5226d19d4c ("ASoC: SOF: Intel: use sof_sdw as default SDW machine driver")
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260402064531.2287261-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SOF compressed offload path accepts codec parameters in
sof_compr_set_params() and forwards them to firmware as
extended data in the SOF IPC stream params message.
However, sof_compr_get_params() still returns success without
filling the snd_codec structure. Since the compress core allocates
that structure zeroed and copies it back to userspace on success,
SNDRV_COMPRESS_GET_PARAMS returns an all-zero codec description
even after the stream has been configured successfully.
The stale TODO in this callback conflates get_params() with capability
discovery. Supported codec enumeration belongs in get_caps() and
get_codec_caps(). get_params() should report the current codec settings.
Cache the codec accepted by sof_compr_set_params() in the per-stream SOF
compress state and return it from sof_compr_get_params().
Fixes: 6324cf901e ("ASoC: SOF: compr: Add compress ops implementation")
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260325-sof-compr-get-params-v1-1-0758815f13c7@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The struct hext_stream is dereferenced before it is checked for NULL.
Although it can never be NULL due to a check prior to
hda_dsp_iccmax_stream_hw_params() being called, this change clears any
confusion regarding hext_stream possibly being NULL.
Check hext_stream for NULL and then assign its members.
Detected by Smatch:
sound/soc/sof/intel/hda-stream.c:488 hda_dsp_iccmax_stream_hw_params() warn:
variable dereferenced before check 'hext_stream' (see line 486)
Fixes: aca961f196 ("ASoC: SOF: Intel: hda: Add helper function to program ICCMAX stream")
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Link: https://patch.msgid.link/20260324173830.17563-1-ethantidmore06@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify allocation by using a flexible array member.
Add __counted_by for extra runtime analysis.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260326023053.53493-1-rosenp@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to the Intel sof design, it will create the name prefix
appended with amp index for the amp codec only, such as:
rt1318-1, rt1318-2, etc...
But the rt1320 is a codec with amp and mic codec functions, it doesn't
have the amp index in its name prefix as above.
And then it will be hard to identify the codec if in multi-rt1320 case.
So we add a flag to force the amp index to be appended.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260326075303.1083567-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
