mirror of
https://github.com/torvalds/linux.git
synced 2026-09-26 10:02:02 +02:00
v7.3-rc2
42666 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
a99d741df7 |
drm next/fixes for 7.3-rc1
core: - use drm_warn instead of warn msm: - Bindings: - Added Shikra support - Document a840, a704, a722 - Core: - Use drm_client buffers for fbdev emulation - teardown fixes - ARM32 DMA fixup - Remove objects from evict list when re-validated - Bunch of corner case and error path fixes - DPU: - Dropped dev_pm_opp_set_rate(0) preventing burnout - Fixed SSPP offsets of Kaanapali - DP: - Dropped dev_pm_opp_set_rate(0) preventing burnout - Cleaned up core code in preparation for MST support - Fixed prepare() to let Pipewire continue in case of the unplugged cable - GPU: - Add support for a704 - Add support for a722 - HDMI: - Simplifed register access amdgpu: - eGPU fixes - Runtime PM fix - UserQ fixes - Backlight fix - Discovery sysfs fix - Reset handling fixes - Buffer func handling fix for xgmi - VCN boundary check fix - DC lut handling fixes - MES fixes - UVD fix - VCE 3 fix - Enforce isolation fix - HPD fix for VGA/LVDS - DML fix - DCN 6 fixes - DC gpu reset fix amdkfd: - Fix return value - CU occupancy for GFX 11 - CU occupancy for GFX 12/12.1 - Queue bounds checking fix - SVM fixes - CRIU bounds checking fix radeon: - iMac display fix xe: - error message cleanups - i2c global register definitions as dependency for xe/i2c fixes - Media workardound - Add CCS to gt_idle debugfs print - Page fault related fix - i2c related fixes - System Controller mailbox bit fix -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmqR+2wACgkQDHTzWXnE hr5VPRAAhJpCnUEOUnhiBRfQB3lqHuKV4N9XQGVoaAZHYLxNkZD6I99ScpIznEr9 sHG0ViBqz2PHyM2XoJzPZDzm8Us0moVUMMdV56IH7h11l8E7Az2Sd/Ji+AQvZEBT /qh9Py0/fjibfDm0ueMROFRhuD8RA2sJqzkGMZUBvErh+zmEQvkIDkIT6A5RpHD8 B3XEGN+UCxPBzCnKNixyNDgY2i4ipFAe0MDj9+Mh0b9BM9BoV8+Eb7sjkBz+ROMH tl57Mjjd37FaYM9MgtEt9m7eOBf266V9Xb9tbIfqShwO1aZa0Vfzuih/3Ck53Nwc VkwepP7NHZZKFHIxFgcRCVjzyA3HpZJmLot8YYOyZDJOG6KKp2X0ZUFBog5Uiv8o 7exd95FLUtIsnUtmLxlermOYJwrokgcVoigcalhLCB2+KZ5/BznutzcCSvrd8vI2 LzEGnLMgzuEKeOmiWZjagID51TYwHfPogULUlwWT4XB62dKih7/uselCObj4m/Lc kRSbiXWz1pxisfiFRsK2GECwsbEb/8qOYgSOQBgppuPbSWpX+2P4IApomRBesQ8E Db+i6hptauOwT0/1ZBo8gkOfb0XIWsjg9iV6pVuUIS80hOlr7Zj1MR7mMrWgL0nM Chs4/Nq8jWU1ESbmKPBINIXCGOGuev4lJO/pBjfySLpTUhWOQcw= =wbEZ -----END PGP SIGNATURE----- Merge tag 'drm-next-2026-08-29' of https://gitlab.freedesktop.org/drm/kernel Pull more drm updates from Dave Airlie: "As mentioned last week, an msm pull request fell down the side of the couch or whatever the email equivalent of that is. This has the msm next stuff + the usual fixes for amd/intel. core: - use drm_warn instead of warn msm: - Bindings: - Added Shikra support - Document a840, a704, a722 - Core: - Use drm_client buffers for fbdev emulation - teardown fixes - ARM32 DMA fixup - Remove objects from evict list when re-validated - Bunch of corner case and error path fixes - DPU: - Dropped dev_pm_opp_set_rate(0) preventing burnout - Fixed SSPP offsets of Kaanapali - DP: - Dropped dev_pm_opp_set_rate(0) preventing burnout - Cleaned up core code in preparation for MST support - Fixed prepare() to let Pipewire continue in case of the unplugged cable - GPU: - Add support for a704 - Add support for a722 - HDMI: - Simplifed register access amdgpu: - eGPU fixes - Runtime PM fix - UserQ fixes - Backlight fix - Discovery sysfs fix - Reset handling fixes - Buffer func handling fix for xgmi - VCN boundary check fix - DC lut handling fixes - MES fixes - UVD fix - VCE 3 fix - Enforce isolation fix - HPD fix for VGA/LVDS - DML fix - DCN 6 fixes - DC gpu reset fix amdkfd: - Fix return value - CU occupancy for GFX 11 - CU occupancy for GFX 12/12.1 - Queue bounds checking fix - SVM fixes - CRIU bounds checking fix radeon: - iMac display fix xe: - error message cleanups - i2c global register definitions as dependency for xe/i2c fixes - Media workardound - Add CCS to gt_idle debugfs print - Page fault related fix - i2c related fixes - System Controller mailbox bit fix" * tag 'drm-next-2026-08-29' of https://gitlab.freedesktop.org/drm/kernel: (121 commits) drm/xe/sysctrl: Read mailbox phase bit from hardware drm/xe/i2c: Keep the i2c controller always enabled drm/xe/i2c: Fix the interrupt handling i2c: designware: Global register definitions drm/xe: Reject page faults from non-fault-mode scratch VMs drm/xe/xe_gt_idle: Add CCS to the powergating info print drm/xe: Do not apply WA 14025883347 to media 3503 drm/amd/display: fix dc_lock leak on GPU reset error paths drm/amd/display: Fix redundant GPUVMEnable checks in dcn6 flip schedule drm/amd/display: Fix wrong bytes-per-pixel value for dml2_422_packed_10 drm/amdkfd: guard against NULL restore_mqd in CRIU queue restore drm/amdgpu/userq: fix lock missing for userq fence error set drm/amdkfd: Fix the case that vm range is hole at svm_migrate_copy_to_vram drm/amdkfd: Fix error path at svm_migrate_copy_to_ram drm/amd/display: Log details when failing to register HPD IRQ drm/amd/display: Fix HPD consideration for VGA/LVDS connectors on DCE drm/amdgpu: clamp the isolation index for rings outside a partition drm/amdkfd: Reject zero-sized AQL queue allocations after size halving drm/amdgpu: Fix VCE 3 ring align_mask drm/kfd: Add CU occupancy support to GFX12.1 ... |
||
|
Linus Torvalds
|
275bc4eedf |
RTC for 7.3
Subsystem: - patchwork project is moving to kernel.org - fully initialize clk_init_data - add missing MODULE_DEVICE_TABLE() - DT bindings conversions to DT schema Drivers: - ds1307: fix WADA bit for alarms on RX8130 - rzn1: add support for RZ/T2H and RZ/N2H, many fixes -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEBqsFVZXh8s/0O5JiY6TcMGxwOjIFAmqQtsEACgkQY6TcMGxw OjJlIhAAoIwDLpLYkKfiZ+WIEcYOQkEnU7TYGD9R01oNSlGFEUkKEd5oATm4Dmz7 DfNYEFi6oPF+GJVQyVFQVxOroaKdfG80KW1ydXQVk7oMUuqW6L/juivjncGm17r+ rzMOUaSFYOCGJkvsEqTNZBz6aBHV89pTIeuwDqeTrZvkJOUHDwcKvHh401AKnIif cylLWGu72ai8+qz/9+wBY7lVDEEnW4DsYc4JjLhpc5p7B/rtHgaiyuI57KvAOZLr QP3nO+Ffoj5D+WSuT/eebVujEj7FM8cGbQwDUqgGKfAvZg4HDqcnMwUp6j3/Z1nQ Zt3DRq760oZoW9lXZEKZEOcvGh7AY/xNwNjF5kG/vAYLuHzlsne4T50BvtijUHUP KvDN6yt3acWOnr/VTikuf84lpZEgm6lxBj2ek7uxMBkSm+L22LPXl0zIhrymiHLQ dyq/DLADmpKuJPhogRhqEcQ0xEh30R46oxR4+84rjMLW7kTjNoX52oZ+n7vDctmJ Z5Tgup65WfR3T4AKgB/DHAQYomisaAEXn+mw+QuwsIV3xrBoMaxuMVwqdN/nM6yY cu20yTZK5Ap/o0oFPDoYT9jQqmyipTvHVba0Q3XCD63qg5zGW3DU77KpbEDyIgSa g5uvWQHQMafJrhnCsTKJw8plMKxec63KWyIrDOXHFAppypZYBPA= =Br8X -----END PGP SIGNATURE----- Merge tag 'rtc-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "The RZN1 driver got a fairly comprehensive cleanup. More DT binding are converted to DT schema, leaving only 5 remaining files to convert. Subsystem: - patchwork project is moving to kernel.org - fully initialize clk_init_data - add missing MODULE_DEVICE_TABLE() - DT bindings conversions to DT schema Drivers: - ds1307: fix WADA bit for alarms on RX8130 - rzn1: add support for RZ/T2H and RZ/N2H, many fixes" * tag 'rtc-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (42 commits) MAINTAINERS: update rtc subsystem patchwork location rtc: msc313: Select by default on MSTARV7 rtc: microcrystal: Make sure clk_init_data is fully initialized rtc: philips: Make sure clk_init_data is fully initialized rtc: nct3018y: Make sure clk_init_data is fully initialized rtc: m41t80: Make sure clk_init_data is fully initialized rtc: hym8563: Make sure clk_init_data is fully initialized rtc: rzn1: Add support for Renesas RZ/T2H and RZ/N2H SoCs rtc: rzn1: Drop trailing comma from OF match table sentinel rtc: rzn1: Add OF match data to gate SUBU register access rtc: rzn1: use FIELD_PREP/FIELD_GET and GENMASK for register access rtc: rzn1: Consistently use dev_err_probe() rtc: rzn1: Use temporary variable for struct device rtc: rzn1: Dynamically calculate synchronization delay based on clock rate rtc: rzn1: Replace remove callback with devm_add_action_or_reset() rtc: rzn1: Use pm_runtime_put_sync() rtc: Kconfig: Broaden RTC_DRV_RZN1 dependency to ARCH_RENESAS rtc: rzn1: Fix malformed MODULE_AUTHOR string rtc: rzn1: Disable alarm interrupt before reprogramming alarm registers rtc: rzn1: Fix alarm range check truncation on 32-bit systems ... |
||
|
Linus Torvalds
|
3ba13f5e71 |
Devicetree fixes for v7.3, part 1:
- Fix possible out-of-bounds access in of_alias_scan() - Fix refcount leak in of_irq_get_affinity() - Add Qualcomm SPMI PMIC haptics input which is already referenced -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmqQfDwACgkQ+vtdtY28 YcNnZA//TU5OaPuR+cqEdxGUagr1kDhjwfKkOde2h6d1b73f8FWL3r6/vM1ThKVK e0RVIcFg39ZYHoNMGUp/LSZUTy8jWUpGbTCCivszPvvFfocLwv9k/FU5LDFtpInl jBA02byU4GLWSgDi1DOTaok17HfM6PtFKlilqk/NYGP7WnajknCe+45WglHMMWg/ SXNZeLGQXC7OZtuqgzqNJqWWzeT+8V0Xl+M8tZk4zljghGkXo0vJ4c7TPNRGY5Gh e9NPtTyMjJL7y92jKUWb5JTX8W8Wu+uttq6e8q38gkO9lcK0iNVKU5zZNKRMhrlC 7500fS9IG5BLV5Fu1eJ8s+LLlBMim1QUjZW9N6+577kVXFi5mfrBkqI5xzUZcn5f p5zdyJUT9PeLAVXBotC3ZwWxrKqr6e41OXmSjdch4WoyXVmgcVi0qBgO+fVc92au Csfj7/Z/B0jC5YuVQu9qJshXeeCQuTJLluL+/t4jNykSmdjc5cw4Kvom9yrvmlDv yBYObHu7cLaRzPd6y7qq2BMk7eEztF7ebQj75SantdYT94NJQq9zaSoQc7vA3w5R GiLNu0+K6ZHKoGjn32gIJhvgMq/xK//XXFkK+dKqRZD5s4nZ5oNSR8rj19P4JRo8 LM+hi5f3f5Xpi7efgXmQGRR0eKyOHV/7oTm5o/BapeuAgaJuEqA= =5Xnn -----END PGP SIGNATURE----- Merge tag 'devicetree-fixes-for-7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Fix possible out-of-bounds access in of_alias_scan() - Fix refcount leak in of_irq_get_affinity() - Add Qualcomm SPMI PMIC haptics input which is already referenced * tag 'devicetree-fixes-for-7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: fix out-of-bounds read in of_alias_scan() stem parser of/irq: Fix device node refcount leak in of_irq_get_affinity() dt-bindings: input: Add Qualcomm SPMI PMIC haptics |
||
|
Linus Torvalds
|
f7e3f4d9f4 |
Backlight for v7.3
- New Support & Features
- Silergy SY7758: Add driver for the 6-channel high-efficiency LED driver
- Improvements & Fixes
- Awinic AW99706: Fix device tree property names to match the binding, consistently
validate all property values, and honor the core blank state in `update_status()`
- Kinetic KTD2801: Add missing dependency on `GPIOLIB` in Kconfig
- Qualcomm WLED: Remove redundant `dev_err()` calls
- Cleanups & Refactoring
- Core: Use `sysfs_emit()` instead of `sprintf()` in sysfs show callbacks
- Maintainers: Update Junjie Cao's email address for the Awinic AW99706 driver
- Device Tree Binding Updates
- Marvell 88PM860X: Add missing bracket in the example
- Silergy SY7758: Document the 6-channel high-efficiency LED driver
-----BEGIN PGP SIGNATURE-----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=8Tc7
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Support & Features:
- Silergy SY7758: Add driver for the 6-channel high-efficiency LED
driver
Improvements & Fixes
- Awinic AW99706: Fix device tree property names to match the
binding, consistently validate all property values, and honor the
core blank state in `update_status()`
- Kinetic KTD2801: Add missing dependency on `GPIOLIB` in Kconfig
- Qualcomm WLED: Remove redundant `dev_err()` calls
Cleanups & Refactoring
- Core: Use `sysfs_emit()` instead of `sprintf()` in sysfs show
callbacks
- Maintainers: Update Junjie Cao's email address for the Awinic
AW99706 driver
Device Tree Binding Updates
- Marvell 88PM860X: Add missing bracket in the example
- Silergy SY7758: Document the 6-channel high-efficiency LED driver"
* tag 'backlight-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: Use sysfs_emit() instead of sprintf()
backlight: qcom-wled: Remove redundant dev_err()
backlight: ktd2801: Fix unmet dependency on GPIOLIB
backlight: aw99706: Honor the core blank state in update_status()
backlight: aw99706: Validate all DT property values consistently
backlight: aw99706: Fix DT property names to match binding
dt-bindings: backlight: 88pm860x: Add missing bracket
MAINTAINERS: Update my email address for the AW99706 backlight driver
backlight: Add SY7758 6-channel High Efficiency LED Driver support
dt-bindings: leds: backlight: Document the SY7758 6-channel High Efficiency LED Driver
|
||
|
Linus Torvalds
|
7cc2726d48 |
LEDs for v7.3
- New Support & Features
- Core: Extend netdev trigger speeds up to 100G.
- PWM Multicolor: Introduce default-intensity property.
- Analog Devices LTC3220: Add support for 18 channel LED driver.
- NXP PCA963x: Add multicolor LED class support.
- Improvements & Fixes
- GPIO: Clear error pointers for skipped LEDs.
- Broadcom BCM63138: Use %pe to print pinctrl error instead of %ld.
- ISSI IS31FL319x: Modernize device registration by using fwnode APIs.
- NXP PCA9532: Fix inverted GPIO output polarity.
- NXP PCA9532: Fix phantom device registration on missing hardware.
- STMicroelectronics ST1202: Correct and extend hw_pattern documentation.
- STMicroelectronics ST1202: Fix channel disable logic on zero brightness and ensure
brightness changes are applied in active mode.
- STMicroelectronics ST1202: Fix hardware pattern sequence programming, validate inputs,
and correct pattern duration calculations.
- STMicroelectronics ST1202: Validate LED reg property against channel count.
- TI LP5860: Fix a potential double-unlock during device initialization and fix error
handling path by using devm_mutex_init().
- Cleanups & Refactoring
- GPIO: Make legacy gpiolib interface optional.
- Device Tree Binding Updates
- Core: Add default-intensity property.
- Core: Document "gpio" trigger.
- Analog Devices LTC3220: Add DT binding for LTC3220 18 channel LED Driver.
- Broadcom BCM6358: Convert to DT schema.
- LaCie NS2: Convert to DT schema.
- NXP PCA963x: Add multicolor LED support.
- NXP PCA963x: Fix reg maximum for pca9635.
- TI TPS65217: Convert backlight bindings to DT schema.
-----BEGIN PGP SIGNATURE-----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=Tm6g
-----END PGP SIGNATURE-----
Merge tag 'leds-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"New Support & Features:
- Core: Extend netdev trigger speeds up to 100G
- PWM Multicolor: Introduce default-intensity property
- Analog Devices LTC3220: Add support for 18 channel LED driver
- NXP PCA963x: Add multicolor LED class support
Improvements & Fixes:
- GPIO: Clear error pointers for skipped LEDs
- Broadcom BCM63138: Use %pe to print pinctrl error instead of %ld
- ISSI IS31FL319x: Modernize device registration by using fwnode APIs
- NXP PCA9532: Fix inverted GPIO output polarity
- NXP PCA9532: Fix phantom device registration on missing hardware
- STMicroelectronics ST1202: Correct and extend hw_pattern
documentation
- STMicroelectronics ST1202: Fix channel disable logic on zero
brightness and ensure brightness changes are applied in active mode
- STMicroelectronics ST1202: Fix hardware pattern sequence
programming, validate inputs, and correct pattern duration
calculations
- STMicroelectronics ST1202: Validate LED reg property against
channel count
- TI LP5860: Fix a potential double-unlock during device
initialization and fix error handling path by using
devm_mutex_init()
Cleanups & Refactoring:
- GPIO: Make legacy gpiolib interface optional
Device Tree Binding Updates:
- Core: Add default-intensity property
- Core: Document "gpio" trigger
- Analog Devices LTC3220: Add DT binding for LTC3220 18 channel LED
driver
- Broadcom BCM6358: Convert to DT schema
- LaCie NS2: Convert to DT schema
- NXP PCA963x: Add multicolor LED support
- NXP PCA963x: Fix reg maximum for pca9635
- TI TPS65217: Convert backlight bindings to DT schema"
* tag 'leds-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (29 commits)
leds: is31fl319x: Modernize registration
dt-bindings: leds: lacie,ns2-leds: Convert to DT schema
leds: pca963x: Add multicolor LED class support
dt-bindings: leds: nxp,pca963x: Add multicolor LED support
dt-bindings: leds: nxp,pca963x: Fix reg maximum for pca9635
leds: gpio: Clear error pointers for skipped LEDs
dt-bindings: leds: backlight: Convert TPS65217 to DT schema
leds: pca9532: Fix phantom device registration on missing hardware
leds: gpio: Make legacy gpiolib interface optional
leds: bcm63138: Use %pe to print pinctrl error instead of %ld
dt-bindings: leds: Add default-intensity property
leds: ltc3220: Add Support for LTC3220 18 channel LED Driver
dt-bindings: leds: Add LTC3220 18 channel LED Driver
dt-bindings: leds: bcm6358: Convert to DT schema
dt-bindings: leds: Document "gpio" trigger
leds: st1202: Correct and extend hw_pattern documentation
leds: st1202: Validate LED reg property against channel count
leds: st1202: Disable channel when brightness is set to zero
leds: st1202: Fix brightness having no effect while pattern mode is active
leds: st1202: Fix spurious pattern sequence start in setup
...
|
||
|
Linus Torvalds
|
79b4f3baae |
MFD for v7.3
- New Support & Features
- MediaTek MT6397: Add mt6323 AUXADC support.
- MediaTek MT6397: Add mt6323 EFUSE support.
- Spreadtrum SC27xx: Add SC2730 regulator cell.
- Improvements & Fixes
- Apple SMC: Fix key count endianness annotation.
- Azoteq IQS62x: Reject zero-length firmware records.
- ChromeOS EC: Introduce cros_ec_read_features helper and read features during
probe to catch transfer errors.
- Cirrus Logic CS42L43: Fix regmap defaults ordering.
- Cirrus Logic CS42L43: Remove redundant NULL checks on SoundWire.
- Congatec Board Controller: Fix teardown ordering in cgbc_remove().
- HP iPAQ Micro: Fix out-of-bounds stack read in ipaq_micro_str.
- Marvell 88PM886: Initialize the battery page.
- QNAP MCU: Keep the reply buffer alive past a command timeout.
- RAVE SP: Validate received frame payload lengths.
- Silicon Labs Si476x: Drop duplicate NULL checks.
- Silicon Labs Si476x: Modernize GPIO handling.
- Silicon Motion SM501: Fix potential memory leaks during remove.
- UCB1x00: Convert Assabet gpio-keys to use software nodes and register software
node for GPIO controller.
- Viperboard: Fix native fields type in structures as little-endian.
- Viperboard: Remove redundant NULL check before kfree().
- X-Powers AXP20x: Preserve other control bits when powering off.
- Cleanups & Refactoring
- Core: Drop unused assignment of spi_device_id driver data.
- Core: Initialize spi_device_id arrays using member names.
- Core: Unify style of spi_device_id arrays.
- Maintainers: Add Intel LPSS section to follow the changes.
- Maintainers: Add a mailing list entry to MFD.
- Cirrus Logic CS42L43: Format sdw_device_id table.
- Cirrus Logic CS42L43: Use new SoundWire enumeration helper.
- ROHM PMIC: Factor out power button registration and convert gpio-keys to use
software nodes.
- ST-Ericsson DB8500: Fold dbx500 header into db8500.
- Device Tree Binding Updates
- Core: Add techvision vendor prefix.
- Marvell 88PM886: Allow vbus regulator.
- MediaTek MT8195 SCP: Add support for MT8189 SoC.
- Qualcomm SPMI PMIC: Document PMG1110.
- Qualcomm SPMI PMIC: Document haptics device.
- Qualcomm TCSR: Add compatible for Hawi and Maili SoCs.
- Qualcomm TCSR: Add compatible for Shikra.
- Qualcomm TCSR: Document the IPQ9650 TCSR block.
- STMicroelectronics STMPE: Fix typo st,stmpe601 (should be st,stmpe610).
- Syscon: Add ESWIN EIC7700 compatible.
- Syscon: Allow syscon compatible for Loongson-2K0300 chip id.
- Syscon: Disallow simple-bus with syscon.
- Syscon: Drop custom select for older dtschema.
- TI OMAP USBHS TLL: Convert to DT schema.
-----BEGIN PGP SIGNATURE-----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=92XF
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Support & Features:
- MediaTek MT6397: Add mt6323 AUXADC support
- MediaTek MT6397: Add mt6323 EFUSE support
- Spreadtrum SC27xx: Add SC2730 regulator cell
Improvements & Fixes:
- Apple SMC: Fix key count endianness annotation
- Azoteq IQS62x: Reject zero-length firmware records
- ChromeOS EC: Introduce cros_ec_read_features helper and read
features during probe to catch transfer errors
- Cirrus Logic CS42L43: Fix regmap defaults ordering
- Cirrus Logic CS42L43: Remove redundant NULL checks on SoundWire
- Congatec Board Controller: Fix teardown ordering in cgbc_remove()
- HP iPAQ Micro: Fix out-of-bounds stack read in ipaq_micro_str
- Marvell 88PM886: Initialize the battery page
- QNAP MCU: Keep the reply buffer alive past a command timeout
- RAVE SP: Validate received frame payload lengths
- Silicon Labs Si476x: Drop duplicate NULL checks
- Silicon Labs Si476x: Modernize GPIO handling
- Silicon Motion SM501: Fix potential memory leaks during remove
- UCB1x00: Convert Assabet gpio-keys to use software nodes and
register software node for GPIO controller
- Viperboard: Fix native fields type in structures as little-endian
- Viperboard: Remove redundant NULL check before kfree()
- X-Powers AXP20x: Preserve other control bits when powering off
Cleanups & Refactoring:
- Core: Drop unused assignment of spi_device_id driver data
- Core: Initialize spi_device_id arrays using member names
- Core: Unify style of spi_device_id arrays
- Maintainers: Add Intel LPSS section to follow the changes
- Maintainers: Add a mailing list entry to MFD
- Cirrus Logic CS42L43: Format sdw_device_id table
- Cirrus Logic CS42L43: Use new SoundWire enumeration helper
- ROHM PMIC: Factor out power button registration and convert
gpio-keys to use software nodes
- ST-Ericsson DB8500: Fold dbx500 header into db8500
Device Tree Binding Updates:
- Core: Add techvision vendor prefix
- Marvell 88PM886: Allow vbus regulator
- MediaTek MT8195 SCP: Add support for MT8189 SoC
- Qualcomm SPMI PMIC: Document PMG1110
- Qualcomm SPMI PMIC: Document haptics device
- Qualcomm TCSR: Add compatible for Hawi and Maili SoCs
- Qualcomm TCSR: Add compatible for Shikra
- Qualcomm TCSR: Document the IPQ9650 TCSR block
- STMicroelectronics STMPE: Fix typo st,stmpe601 (should be
st,stmpe610)
- Syscon: Add ESWIN EIC7700 compatible
- Syscon: Allow syscon compatible for Loongson-2K0300 chip id
- Syscon: Disallow simple-bus with syscon
- Syscon: Drop custom select for older dtschema
- TI OMAP USBHS TLL: Convert to DT schema"
* tag 'mfd-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits)
mfd: cs42l43: Fix regmap defaults ordering
dt-bindings: mfd: syscon: Allow syscon compatible for Loongson-2K0300 chip id
dt-bindings: mfd: syscon: Add ESWIN EIC7700 compatible
mfd: qnap-mcu: keep the reply buffer alive past a command timeout
dt-bindings: mfd: qcom,tcsr: Document the IPQ9650 TCSR block
mfd: macsmc: Fix key count endianness annotation
dt-bindings: mfd: qcom,spmi-pmic: Document haptics device
mfd: iqs62x: Reject zero-length firmware records
mfd: rave-sp: validate received frame payload lengths
mfd: sm501: Fix potential memory leaks during remove
mfd: viperboard: Fix native fields type in structures as little-endian
mfd: si476x-i2c: Get rid of duplicate NULL checks
dt-bindings: mfd: Convert OMAP USB TLL to DT schema
mfd: cgbc: Fix teardown ordering in cgbc_remove()
mfd: mt6397-core: Add mt6323 AUXADC support
dt-bindings: mfd: qcom,tcsr: Add compatible for Hawi and Maili SoCs
mfd: rohm: Factor out power button registration
mfd: ucb1x00: Convert Assabet gpio-keys to use software nodes
mfd: ucb1x00: Register software node for GPIO controller
mfd: cs42l43: Tidy up formatting on sdw_device_id table
...
|
||
|
Linus Torvalds
|
b81e341319 |
More thermal control updates for 7.3-rc1
- Fix missing bitfield include headers in Armada and QCom SPM BMG
drivers (Daniel Lezcano)
- Fix missed file when manually applying a change after a conflict
resolution for the QCom SPMI ADC TM5 Gen3 (Daniel Lezcano)
- Move thermal_zone_device_enable() to the right place in order to
prevent calling it if the thermal zone registration failed (Dan
Carpenter)
- Improve bitfield manipulations on Armada (Bryan B. Lima)
- Remove unneeded 'fast_io' on Sun8i and Armada (Wolfram Sang)
- Fix wrong boundary when clamping the low values in the set_trips()
callback and fix wrong mask when setting the temperature interval on
Airoha (Christian Marangi)
- Make use of the regmap API to support Airoha AN7583 (Christian
Marangi)
- Fix adc_tm5_get_temp() return check value on the QCom SPMI ADC
sensor (Rakesh Kota)
- Fix unbalanced clock enablement when the resume fails on the iMX
driver (Can Peng)
- Add Qualcomm Master BandGap thermal monitor support (Satya Priya
Kakitapalli)
- Add Maili Temperature bindings compatible (Haritha S K)
- Add a devm action to clean hardware interrupts, sampling, and
control registers on Spacemit K1 (Pei Xiao)
- Fix trivial typo in a thermal OF code comment (Marek Vasut)
- Remove unnecessary print on Qcom SPMI ADC driver when a call to
devm_request_threaded_irq() fails as this one already prints a
message (Jishnu Prakash)
- Add support for QCom PMIC5 Gen3 ADC by using auxiliary driver and
shared interrupt with the IIO driver (Jishnu Prakash)
- Make resets optional on MT8196 and add the corresponding property in
the DT bindings (AngeloGioacchino Del Regno)
- Fix clock staying enabled on failing resume operation on Qoriq (Can
Peng)
- Fix wrong closing brace position in thermal library header (Andreas
Haufler)
- Fix low and high trip point validation by moving the check after the
clamp on the spacemit driver (surendra)
- Remove redundant error messages on IRQ request failure (Pan Chuang)
- Add IIO_CONSUMER namespace import to the qcom-spmi-mbg-tm thermal
driver to avoid modpost warnings that would appear after merging the
iio tree against the thermal updates (Nathan Chancellor)
- Revert two recent cosmetic updates of the thermal core conflicting
with driver core plans to eliminate class_create() (Rafael Wysocki)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmqPL7YSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1IigH/iBFLcPxeH8fHHMHGNyOwYB2mEJ5NUyO
nJCxvNdmoLqtj12xpfhzSviK0rczFcJD4YGztH7ExbP30gPR3mhG8fo2nEDp8JUK
EOqzo9rzGwENIt1FFGmh6r/e0KMJNP8UwWQr17NJEcoRfrAEEN1kZ5Xl40excQHB
WtKWfYWaICZwmt1u3v2QEWFZJEPovTb9d1Z1ekCdYdmKHq1kn4CCYWhSdFPyCPpL
QjDaIoN2TuRRe5jMEtBqRtdjWo1UyCjc5I+Vz9+mCCOlgMWagizP4Qc+qsBJ9UfA
vY46s+RFTyISIQ9eHnHdiIYdLlnoweS5wsGqiBXmncrvVOH8u3GBYfw=
=e7sH
-----END PGP SIGNATURE-----
Merge tag 'thermal-7.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"This mostly consists of assorted updates of thermal drivers, including
new hardware support (Airoha AN7583, Qualcomm Master BandGap thermal
monitor, QCom PMIC5 Gen3 ADC), but it also includes two reverts of
recent cosmetic thermal core updates that went against driver core
plans to eliminate class_create():
- Fix missing bitfield include headers in Armada and QCom SPM BMG
drivers (Daniel Lezcano)
- Fix missed file when manually applying a change after a conflict
resolution for the QCom SPMI ADC TM5 Gen3 (Daniel Lezcano)
- Move thermal_zone_device_enable() to the right place in order to
prevent calling it if the thermal zone registration failed (Dan
Carpenter)
- Improve bitfield manipulations on Armada (Bryan B. Lima)
- Remove unneeded 'fast_io' on Sun8i and Armada (Wolfram Sang)
- Fix wrong boundary when clamping the low values in the set_trips()
callback and fix wrong mask when setting the temperature interval
on Airoha (Christian Marangi)
- Make use of the regmap API to support Airoha AN7583 (Christian
Marangi)
- Fix adc_tm5_get_temp() return check value on the QCom SPMI ADC
sensor (Rakesh Kota)
- Fix unbalanced clock enablement when the resume fails on the iMX
driver (Can Peng)
- Add Qualcomm Master BandGap thermal monitor support (Satya Priya
Kakitapalli)
- Add Maili Temperature bindings compatible (Haritha S K)
- Add a devm action to clean hardware interrupts, sampling, and
control registers on Spacemit K1 (Pei Xiao)
- Fix trivial typo in a thermal OF code comment (Marek Vasut)
- Remove unnecessary print on Qcom SPMI ADC driver when a call to
devm_request_threaded_irq() fails as this one already prints a
message (Jishnu Prakash)
- Add support for QCom PMIC5 Gen3 ADC by using auxiliary driver and
shared interrupt with the IIO driver (Jishnu Prakash)
- Make resets optional on MT8196 and add the corresponding property
in the DT bindings (AngeloGioacchino Del Regno)
- Fix clock staying enabled on failing resume operation on Qoriq (Can
Peng)
- Fix wrong closing brace position in thermal library header (Andreas
Haufler)
- Fix low and high trip point validation by moving the check after
the clamp on the spacemit driver (surendra)
- Remove redundant error messages on IRQ request failure (Pan Chuang)
- Add IIO_CONSUMER namespace import to the qcom-spmi-mbg-tm thermal
driver to avoid modpost warnings that would appear after merging
the iio tree against the thermal updates (Nathan Chancellor)
- Revert two recent cosmetic updates of the thermal core conflicting
with driver core plans to eliminate class_create() (Rafael
Wysocki)"
* tag 'thermal-7.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
thermal/drivers/qcom-spmi-mbg-tm: Add module namespace import for IIO_CONSUMER
Revert "thermal/core: Allocate the thermal class dynamically"
Revert "thermal/core: Use the thermal class pointer as init guard"
thermal/drivers/armada: Fix missing bitfields include
thermal/drivers/qcom/spm mbg tm: Fix missing bitfield header
thermal/drivers/qcom: Fix missing spmi adc tm5 gen3 file
thermal/drivers: Remove redundant error messages on IRQ request failure
thermal/drivers/spacemit: Validate clamped trip thresholds
tools/lib/thermal: Fix misplaced extern "C" closing brace
thermal/drivers/qoriq: Disable clock on resume failure
thermal/drivers/mediatek/lvts_thermal: Make reset optional for MT8196
dt-bindings: thermal: mediatek: Make resets optional for MT8196
thermal/drivers/qcom: add support for PMIC5 Gen3 ADC thermal monitoring
iio: adc: qcom-spmi-adc5-gen3: Share SDAM0 IRQ with ADC_TM auxiliary driver
iio: adc: qcom-spmi-adc5-gen3: Remove an unnecessary print
thermal/of: Fix trivial enabled typo
thermal/drivers/spacemit/k1: Add shutdown action and reorder registration order
dt-bindings: thermal: qcom-tsens: Document the Maili Temperature Sensor
thermal/drivers/qcom: Add support for Qualcomm MBG thermal monitoring
dt-bindings: thermal: Add Qualcomm MBG thermal monitor support
...
|
||
|
Linus Torvalds
|
502d45774a |
Mostly the usual clk driver updates and new SoC additions plus non-critical
data fixes for things that weren't used yet. One thing that's new here in the core is SSC spread spectrum support (SSC) in the clk provider API. The idea is that DT authors will configure SSC for certain clks and they'll be configured at clk provider registration time or when a consumer device is probed, similar to how we handle assigned clk rates or parents. On the clk driver side we have Qualcomm adding almost half the diff because they add support for 4 different SoCs and then a long tail of other SoCs like Mediatek, Renesas, Rockchip, SpaceMiT, etc. add more SoC support this time around. Luckily it's mostly clk data for these new SoCs because the actual clk_ops are already there. Beyond the new drivers we get all the little fixups for more compilation coverage or usage of more modern APIs. That all looks normal. Finally, I kinda buried the lead, I'm bringing on Brian and Jerome to help out with maintaining the clk subsystem. The current working model is already semi-distributed in that silicon vendors typically take care of their drivers and send me pull requests but I'm becoming a bottleneck for new drivers and core framework review because this has become a 100% volunteer effort on my part. Mike is stepping down after all these years (thanks Mike!) and that jump started the conversation around finding co-maintainers. Brian and Jerome have graciously offered to help me with the work load, meaning in the future they'll be sending pull requests and committing directly to the clk.git tree. They've both been around on the list for a while, I've met them both in person, and they've been making changes to the core clk framework along with helping review patches so I'm pretty confident this will work well. Core: - devm_clk_bulk_get_enable() consumer API - devm_clk_hw_register_composite_pdata() provider API - Spread Spectrum Clock (SSC) support via DT bindings and provider APIs - Divider clk rounding improved (and tested) New Drivers: - Cix Sky1 audio subsystem (AUDSS) - UltraRISC DP1000 - MediaTek MT8173 MFG_TOP - Si549 - Aspeed AST2700 PECI - Airoha EN7523 PCIe - Rockchip RV1106 - Mobileye EyeQ7H - Qualcomm Maili GCC, TCSR, RPMh, and video clks - Qualcomm Shikra GCC, RPM, GPU, display, and audio clks - Qualcomm Nord display and graphics clks - Qualcomm Glymur camera and EVA clks - Qualcomm Hawi video clks - Amlogic A9 AO and peripheral clks - Renesas R-Car X5H (R8A78000) CPG -----BEGIN PGP SIGNATURE----- iQJIBAABCAAyFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmqPGK4UHHN3Ym95ZEBj aHJvbWl1bS5vcmcACgkQrQKIl8bklSXB+g/+O8McZyE7kqNPiz8nQNQq9YwzO9uB /5LkNUUvvxhzJ9YEcXx8HCkmUcAks+kMCHzrZ/gxAN6BQGv9qrTChZZD2ZmD8e50 nj3IxyvN51PwRk5ley1PEsUILrnOqRpY6g83arnFppTP2aU/NxFFGjc5u+5qlIT4 f0xj2sJ0H96Ykw+brSJgEj9MXJHMEKerEqBmaDd0boHavDV3YkT/HxRrjy3WH/sE FBAdq6sOAEX3qnNwsF9debrfg1nKJGH2U8ecb1JThlAufn8yHvC+mxr3P4USxdov xGhDkvKbS+9nkbxeL1LOhnoReOWqNBGQg9qmadQKTrPEu/BAOb8nG62xpucIgLSl 6X3AACRzEE8u8Thaboz+cvQluQfOo667xz5X+bpTsQjfQuq4Yh0F4pO6pLmLd+LT NdOzbQctglbpwHbXIxXQftg+Fnk1bgERILW64DU9mUqXzSJJG9uzv+Ne5R0TTXJp TMRTp/o8o4Fclr1WB73wES523xpf7VltPfUw5XL9UN2xCCY5TI2bpHQwgfmkz/6J nHmxNBBK19qlNFzDovN1gfgwn9XVDLmT7YVSw0El24kINHs7rYXuGc++OX+LmUb3 r19QxJXU8ESV89ZGJYhnaSOKrCj1d4W49AkVqovvJXXYxxlFTab1ox8xKnhUlxGH SGDC+kZah2zUl7A= =iYa8 -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "Mostly the usual clk driver updates and new SoC additions plus non-critical data fixes for things that weren't used yet. One thing that's new here in the core is SSC spread spectrum support (SSC) in the clk provider API. The idea is that DT authors will configure SSC for certain clks and they'll be configured at clk provider registration time or when a consumer device is probed, similar to how we handle assigned clk rates or parents. On the clk driver side we have Qualcomm adding almost half the diff because they add support for 4 different SoCs and then a long tail of other SoCs like Mediatek, Renesas, Rockchip, SpaceMiT, etc. add more SoC support this time around. Luckily it's mostly clk data for these new SoCs because the actual clk_ops are already there. Beyond the new drivers we get all the little fixups for more compilation coverage or usage of more modern APIs. That all looks normal. Finally, I kinda buried the lede, I'm bringing on Brian and Jerome to help out with maintaining the clk subsystem. The current working model is already semi-distributed in that silicon vendors typically take care of their drivers and send me pull requests but I'm becoming a bottleneck for new drivers and core framework review because this has become a 100% volunteer effort on my part. Mike is stepping down after all these years (thanks Mike!) and that jump started the conversation around finding co-maintainers. Brian and Jerome have graciously offered to help me with the work load, meaning in the future they'll be sending pull requests and committing directly to the clk.git tree. They've both been around on the list for a while, I've met them both in person, and they've been making changes to the core clk framework along with helping review patches so I'm pretty confident this will work well. Core: - devm_clk_bulk_get_enable() consumer API - devm_clk_hw_register_composite_pdata() provider API - Spread Spectrum Clock (SSC) support via DT bindings and provider APIs - Divider clk rounding improved (and tested) New Drivers: - Cix Sky1 audio subsystem (AUDSS) - UltraRISC DP1000 - MediaTek MT8173 MFG_TOP - Si549 - Aspeed AST2700 PECI - Airoha EN7523 PCIe - Rockchip RV1106 - Mobileye EyeQ7H - Qualcomm Maili GCC, TCSR, RPMh, and video clks - Qualcomm Shikra GCC, RPM, GPU, display, and audio clks - Qualcomm Nord display and graphics clks - Qualcomm Glymur camera and EVA clks - Qualcomm Hawi video clks - Amlogic A9 AO and peripheral clks - Renesas R-Car X5H (R8A78000) CPG" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (269 commits) clk: microchip: mpfs: fix regmap_update_bits() mask/val order clk: visconti: Make sure clk_init_data is fully initialized clk: ti: Make sure clk_init_data is fully initialized MAINTAINERS: Add Brian Masney and Jerome Brunet as co-maintainers for clk subsystem Drop Michael Turquette's clk maintainer entry clk: ti: composite: resolve parent clocks by DT index, not by name clk: ti: mux: resolve parent clocks by DT index, not by name clk: devres: fix cleanup in devm_clk_get_optional_enabled_with_rate() dt-bindings: clock: ti,keystone-gate: Convert to DT schema dt-bindings: clock: ti: Convert APLL clock to DT schema clk: zynq: pll: Fix kernel-doc after determine_rate() conversion dt-bindings: clock: ti,clockdomain: Convert to DT schema dt-bindings: clock: Correct white-space style clk: samsung: Don't include <linux/mod_devicetable.h> clk: at91: Read "reg" with helper clk: renesas: Add R-Car X5H CPG driver clk: rockchip: rk3576: fix source muxes for SPI0..SPI4 clk: rockchip: Add clock controller for the RV1106 dt-bindings: clock: rockchip: Add RV1106 CRU support dt-bindings: clock: Document Renesas R-Car X5H Clock Pulse Generator ... |
||
|
Linus Torvalds
|
fc710de0dd |
remoteproc updates for v7.3
Add a remoteproc driver and binding for AMD MicroBlaze/V soft cores executing from dual-port BRAM, with clock and reset control and support for firmware without a resource table. Introduce a generic Qualcomm PAS service with SCM and OP-TEE backends, and migrate the PAS, MSS, and WCNSS remoteproc drivers to it. Add Nord ADSP and CDSP support, Eliza CDSP support, Maili ADSP/CDSP bindings, and late-attach SoCCP support for Kaanapali, Hawi, Maili, and Glymur. Enable BAM-DMUX child devices for PAS modems and fix PAS memory protection, handover, shutdown, and resource lifetime handling. Harden remoteproc lifecycle handling by attaching asynchronously, stopping crashed processors, synchronizing crash work with removal, and forcing shutdown before device resources are released. Reallocate resources during attach recovery and fix several reference and error-path leaks. Add Xilinx R5 crash detection and move RPU start and stop sequencing into the platform firmware driver. Consolidate write-combining carveout mapping callbacks, use correct I/O-memory accessors, and share optional ELF resource-table handling across drivers. Convert the TI Wakeup M3 binding to DT schema, correct Qualcomm and generic remoteproc bindings, and harden resource-table iteration against signed-offset out-of-bounds accesses. -----BEGIN PGP SIGNATURE----- iQJCBAABCgAsFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmqN/FgOHGJqb3JuQGty eW8uc2UACgkQCx85Pw2ZrcUvXRAAkCk6ogZOdjGY9WBugieN3WEfkAzrWAS9ntWK CGR+VcL633ymLtS/6E2fdv4d7Uh1An/ipcCJUSXU4CzumB7O1FJi1CfQok2j+4xz dIBc9m6SAMYBFVLAXD2NujdOf+nwEDLbJQib7lVBTBCNjQamvjFhUu9g/bnJt4gT F1ieAgNP15OFfHnoSWhoFHXI8ao4Vs0PwfoBLEwIP5VuFXy3DzVGaqEZgEgD7+G5 Qy0ii/TO+EFC8GdK8xxlCtKYT6J3qG/pQBaCtS9QwSXNPTbI31MlDimInUl7lxHS yWeDOJPVgNL279W7DnHiELQT6uGFac+1ILNBIGl9lI1+4Hcwgg6eTwwP6wcIOhYL YFXNfCeb5XW6moOKxhkcbOwZ46/FUS4sywoUyaAevFOc8kisDwMy81C1d2cYVg12 gq69ah4sWkSPSkAgOeUf8Aa8v3eXj9IaxcIAW9+fQdNaduuG7oRvVzowKbli9SiD qAAaIV2wyt+Il7VJl5Nw1R0nJONMTK44Xft+3k/TFzmr5N1ivfSBvGxIg0zdB9xZ 7akukQjCJgWOcyICa3ShyA6foClsJF26xVhQrfY7UPKI7DQHY5GQAKgpA2zWrqH5 cKt5xRcImKn+788pfkNdVj8IxROjGEI5JXf6etIvpPnUzkFG3nZfY6kLryOxvv0H zyxm4OM= =wi8c -----END PGP SIGNATURE----- Merge tag 'rproc-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull remoteproc updates from Bjorn Andersson: "Add a remoteproc driver and binding for AMD MicroBlaze/V soft cores executing from dual-port BRAM, with clock and reset control and support for firmware without a resource table. Introduce a generic Qualcomm PAS service with SCM and OP-TEE backends, and migrate the PAS, MSS, and WCNSS remoteproc drivers to it. Add Nord ADSP and CDSP support, Eliza CDSP support, Maili ADSP/CDSP bindings, and late-attach SoCCP support for Kaanapali, Hawi, Maili, and Glymur. Enable BAM-DMUX child devices for PAS modems and fix PAS memory protection, handover, shutdown, and resource lifetime handling. Harden remoteproc lifecycle handling by attaching asynchronously, stopping crashed processors, synchronizing crash work with removal, and forcing shutdown before device resources are released. Reallocate resources during attach recovery and fix several reference and error-path leaks. Add Xilinx R5 crash detection and move RPU start and stop sequencing into the platform firmware driver. Consolidate write-combining carveout mapping callbacks, use correct I/O-memory accessors, and share optional ELF resource-table handling across drivers. Convert the TI Wakeup M3 binding to DT schema, correct Qualcomm and generic remoteproc bindings, and harden resource-table iteration against signed-offset out-of-bounds accesses" * tag 'rproc-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (60 commits) remoteproc: fix OOB read via signed offset in rsc_table_for_each_entry() remoteproc: replace BSD blurb with SPDX identifier in rsc_table.h remoteproc: replace BSD blurb with SPDX identifier in remoteproc.h remoteproc: fix coding style issues in remoteproc.h MAINTAINERS: add rsc_table.h to remoteproc entry remoteproc: qcom: pas: Add Nord ADSP and CDSP support dt-bindings: remoteproc: qcom,nord-pas: Document Nord PAS remoteproc: qcom: pas: Drop unused dtb_mem_region field remoteproc: qcom: pas: Map/unmap subsystem region before auth_and_reset remoteproc: qcom: pas: Fix the PAS context creation placement remoteproc: qcom: pas: Guard dtb metadata release with dtb_pas_id check remoteproc: qcom: annotate mem_region fields with __iomem arm64: dts: qcom: eliza: Add fallback compatible for ADSP remoteproc dt-bindings: remoteproc: qcom,milos-pas: Move Eliza ADSP to SM8550 schema remoteproc: qcom: pas: Add Eliza CDSP support dt-bindings: remoteproc: qcom,sm8550-pas: Add Eliza CDSP compatible remoteproc: qcom: q6v5: Request shutdown if crash is triggered host-side remoteproc: Force shutdown during device removal remoteproc: Prevent crash handling to race with rproc_del() remoteproc: Allow shutdown of crashed processors ... |
||
|
Linus Torvalds
|
70f5376dbd |
TTY / Serial driver updates for 7.3-rc1
Here is the "big" set of tty and serial driver updates for 7.3-rc1. Not really all that much happened this development cycle for this subsystem, changes in here are: - removal of the ipwireless driver as it's no longer used or needed - new 8250_mxpcie driver added - qcom serial driver updates and additions - vt mode validation addition - lots of other small serial driver updates and additions All of these have been in linux-next for weeks with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCao2mTw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yk34ACdFfyDYJ0n1JcdskTxdNMBSPRkj7UAoJtMC/2y jxCfyfkM18YIuwZD6CvO =MlfE -----END PGP SIGNATURE----- Merge tag 'tty-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull TTY / serial driver updates from Greg KH: "Here is the "big" set of tty and serial driver updates for 7.3-rc1. Not really all that much happened this development cycle for this subsystem, changes in here are: - removal of the ipwireless driver as it's no longer used or needed - new 8250_mxpcie driver added - qcom serial driver updates and additions - vt mode validation addition - lots of other small serial driver updates and additions All of these have been in linux-next for weeks with no reported issues" * tag 'tty-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (97 commits) serial: imx: serialize imx_uart_ports[] lifetime tty: clear cdev pointer after cdev_add() failure tty: skip cdev_del() when no cdev is registered serial: core: clear freed pointers on uart_register_driver() failure serial: core: do fallible allocations before the console can be registered serial: 8250_mxpcie: implement rx_trig_bytes callbacks via MUEx50 RTL serial: 8250_mxpcie: introduce per-port private data structure serial: 8250: allow UART drivers to override rx_trig_bytes handling serial: 8250_mxpcie: add break support for RS485 using MUEx50 features serial: 8250: allow low-level drivers to override break control serial: 8250_mxpcie: support serial interface mode switching serial: 8250_mxpcie: speed up TX using memory-mapped FIFO window serial: 8250_mxpcie: speed up RX using memory-mapped FIFO window serial: 8250_mxpcie: add custom handle_irq callback serial: 8250_mxpcie: offload XON/XOFF flow control to MUEx50 hardware serial: 8250_mxpcie: enable automatic RTS/CTS flow control serial: 8250_mxpcie: enable enhanced mode and program FIFO trigger levels serial: 8250: add Moxa MUEx50 UART port type serial: 8250: split Moxa PCIe serial board support out of 8250_pci serial: qcom-geni: Use geni_se_set_perf_level() for baud rate perf level ... |
||
|
Linus Torvalds
|
f4d50813c0 |
USB / Thunderbolt changes for 7.3-rc1
Here is the big set of USB and Thunderbolt driver updates for 7.3-rc1.
Lots of driver work for new devices and systems, and many other minor
fixes and updates. Included in here are:
- Thunderbolt subsystem driver updates and additions
- typec driver updates and additions
- usb gadget fixes all over the place, seems like people are finally
paying attention to these drivers for some reason
- xhci driver updates and fixes based on lots of reports
- usb-serial driver updates and additions
- new device ids
- other minor USB driver updates and fixes
All of these have been in linux-next for a while with no reported issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCao2lJA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynK3QCeLQdHatZ2d5sJdvssiLKREZeND4EAnj+V1K1O
PcVJzKAiC4dgSZ5SOwn1
=OJea
-----END PGP SIGNATURE-----
Merge tag 'usb-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for 7.3-rc1.
Lots of driver work for new devices and systems, and many other minor
fixes and updates. Included in here are:
- Thunderbolt subsystem driver updates and additions
- typec driver updates and additions
- usb gadget fixes all over the place, seems like people are finally
paying attention to these drivers for some reason
- xhci driver updates and fixes based on lots of reports
- usb-serial driver updates and additions
- new device ids
- other minor USB driver updates and fixes
All of these have been in linux-next for a while with no reported issues"
* tag 'usb-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (163 commits)
usb: gadget: uvc: fix dangling pointers in uvc_function_bind() and uvc_function_unbind()
usb: typec: hd3ss3220: fix VBUS regulator error message
usb: usbfs: fix use-after-free of usb_device in usbdev_release()
usb: gadget: u_audio: Fix use-after-free on sound card disconnect
usb: dwc3: gadget: Fix use-after-free in dwc3_gadget_free_endpoints due to race condition
usb: gadget: f_tcm: keep port count until LUN teardown completes
usb: usbtest: disable dynamic ID support
usb: typec: tcpci: pass correct rx_type to tcpm_pd_receive()
USB: c67x00: fix use-after-free in c67x00_add_iso_urb()
usb: typec: ucsi: use UCSI_TIMEOUT_MS for sync command completion
usb: gadget: snps_udc_plat: clean up PHY on probe deferral
usb: gadget: f_tcm: fix deadlock in usbg_make_tpg()
usb: dwc2: gadget: Exit partial power down state when changing USB pull-up
usb: gadget: f_fs: Fix Use-After-Free in AIO error path
usb: gadget: f_fs: Prevent deadlock during ep0 read loop
usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed
usb: gadget: midi2: remove default configfs groups on teardown
usb: gadget: uvc: Fix null pointer dereference in uvcg_video_init()
usb: typec: thunderbolt: Disable work before freeing tbt on remove
usb: xhci: Handle bogus TRB pointers in Missed Service Error events
...
|
||
|
Linus Torvalds
|
93e4b3076b |
Char/Misc/IIO/etc driver update for 7.3-rc1
Here is the big set of char, misc, iio, counter, fpga, and other small
driver subsystems for 7.3-rc1.
Overall, due to some driver removals we only added a bit more code than
removed, which was a nice change. Highlights in this merge request are:
- Loads of IIO driver updates and additions
- binder driver updates (more on that below...)
- Removal of the SGI XP and GRU drivers as they are not used anymore
and turn out to be pretty insecure overall
- Removal of the obsolete ibmasm driver as it's not being used anymore
- Coresight driver updates and additions
- Mei driver udpates
- Counter driver updates
- FPGA driver updates
- ICC driver updates
- lots and lots of other tiny driver updates to resolve reported
issues
All of these have been in linux-next for a while, with the only reported
issues being some major merge conflicts. Miguel pointed out some of
these with the Rust tree merge, which is the majority of them. I'll
follow up with a diffstat of the merge resolution I made against your
most recent tree, which works for me.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCao143A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymtUgCeKB62gT1JfA86cg3NDB1opp+10N0An3oBBegQ
IJLqJgK45dTNtMGBwGFV
=68af
-----END PGP SIGNATURE-----
Merge tag 'char-misc-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO/etc driver updates from Greg KH:
"Here is the big set of char, misc, iio, counter, fpga, and other small
driver subsystems for 7.3-rc1.
Overall, due to some driver removals we only added a bit more code
than removed, which was a nice change. Highlights in this merge
request are:
- Loads of IIO driver updates and additions
- binder driver updates (more on that below...)
- Removal of the SGI XP and GRU drivers as they are not used anymore
and turn out to be pretty insecure overall
- Removal of the obsolete ibmasm driver as it's not being used
anymore
- Coresight driver updates and additions
- Mei driver udpates
- Counter driver updates
- FPGA driver updates
- ICC driver updates
- lots and lots of other tiny driver updates to resolve reported
issues
All of these have been in linux-next for a while"
* tag 'char-misc-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (513 commits)
iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF
iio: adc: pac1921: fix wrong channel used in trigger handler read
iio: light: gp2ap002: re-enable irq if runtime suspend fails
iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes
iio: light: apds9306: fix PM reference leak in apds9306_read_data()
iio: gyro: mpu3050: fix sign of raw angular velocity readings
iio: srf04: fix pm_runtime handling on probe error path
iio: adc: ad4080: configure backend data size
iio: adc: adi-axi-adc: add data size support for AD408X backend
iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable
iio: dac: ad5446: fix OF module device table
iio: light: opt4001: Fix reversed GENMASK() arguments in fault count mask
iio: light: opt4001: Reject integration times with a non-zero seconds part
iio: light: opt4001: Fix incompatible pointer type passed to div_u64_rem()
iio: light: opt4001: Fix power down clearing bits of the wrong register
iio: light: opt4060: Fix incorrect register name in threshold read error message
iio: light: opt4060: Fix pointer type passed to div_u64_rem()
iio: light: opt4060: Reject integration times with a non-zero seconds part
iio: light: ltrf216a: fix runtime PM reference leak in error path
iio: pressure: dps310: fix NULL pointer dereference on ACPI probe
...
|
||
|
Linus Torvalds
|
66498c75b4 |
dmaengine updates for v7.3
Core:
- New API to combine configuration and preparation and users
New Support:
- Mediatek MT8189 SoC uart dma support
Updates:
- Designware dma driver flatten desc structures and simplify code,
interrupt-path groundwork changes, first part of PCI EP DMA support
- Updates to zynqmp_dma with runtime PM and device removal improvments
- Xilinx dma optimizations for AXIDMA and MCDMA channel management
-----BEGIN PGP SIGNATURE-----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=lUcr
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Core:
- New API to combine configuration and preparation and users
New hardware support:
- Mediatek MT8189 SoC uart dma support
Updates:
- Designware dma driver flatten desc structures and simplify code,
interrupt-path groundwork changes, first part of PCI EP DMA support
- Updates to zynqmp_dma with runtime PM and device removal
improvments
- Xilinx dma optimizations for AXIDMA and MCDMA channel management"
* tag 'dmaengine-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (73 commits)
dmaengine: dw-edma: Mark emulated IRQ as level-triggered
dmaengine: idxd: assign all engines to group 0 in IAA defaults
dmaengine: qcom_hidma: remove conditional return with no effect
dmaengine: qcom-bam-dma: fix autosuspend cleanup during removal
dmaengine: fsl-edma: tracing: no ptr dereference during log output
dmaengine: dw-edma: Program endpoint function numbers
dmaengine: dw-edma-pcie: Add chip flags to match data
dmaengine: dw-edma-pcie: Handle optional data blocks
dmaengine: dw-edma-pcie: Factor out descriptor block address lookup
dmaengine: dw-edma-pcie: Add register offset match flag
dmaengine: dw-edma-pcie: Add platform ops to match data
dmaengine: dw-edma-pcie: Rename vsec_data to dma_data
dmaengine: dw-edma-pcie: Add capability match data
dmaengine: dw-edma-pcie: Track non-LL mode in DMA data
dmaengine: dw-edma: Add partial channel ownership mode
dmaengine: dw-edma: Initialize IRQ data before requesting IRQs
dmaengine: dw-edma: Add core quiesce operations
dmaengine: dw-edma: Add per-channel interrupt routing control
dmaengine: dw-edma: Factor out HDMA interrupt setup helper
dmaengine: dw-edma: Defer channel IRQ handling to workqueue
...
|
||
|
Linus Torvalds
|
16e6a1a3cb |
phy updates for 7.3
As usual bunch of new device and driver support and updates to existing
drivers and addition of Manivannan to help with reviews.
- New Support
- Mediatek MT8196 DSI PHY support
- Renesas RZ/G3L usb2 support
- Qualcomm SM8475 QMP USB PHY and PCIe phy, IPQ9650 QMP PCIe PHY, QUSB2
Phy for Shikra SoC, Hawi support for QMP PCIe phy and UFS PHY. Glymur
QMP PCIe Multi-PHY driver and multiple link-mode support, ipq5210 PCIe
phy support
- Spacemit USB3/PCIe comb PHY driver
- Updates
- Samsung hdptx driver improvements for modernizing the register
access and code cleanup
- Qualcomm drop duplicate v8 DP headers, improved runtime handling for qmp
drivers
- Rockchip clock lane phase tuning and 2500 Mbps support and TMDS rate
handling
- Freescale imx8mq improvements for runtime pm, pd handling.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmqMf1YACgkQfBQHDyUj
g0cx8g/+M2Thg88JXJ1HIbcCD/Dh6gtsZHmnfW71EUxIE//QKV950PE1Oqu/Va7i
Z9YRonkGjzyuYFJZixW/C8OzL5lqy1vp62t/qbUa1Q4UKawhI+ALEUBrWXkozxyR
LKM9OSoNTxUa40vJrb54MkiouTrwGOhOPhf0LB6QaIDkQqae5/10uux5TsGdvU57
pVDC2SIAZaYg4a3xcv0sFVORDuMhPMSGZyjDR2CDSaAdR3H4kau5mfY7+98w8T6u
dt7wEWThUSFXTSPbHER3zj2JEHlaG/EcOzAmwy44ttqTdqP7X12O4nnJeDE08ymb
/sib42WwQvL3OwXgzBOKOIF7P6g6691I15lMLIMtGj9j2wyimDchO7YGRcNxtJTt
3x96YbWABmDbrQblWXZcKro/PG13i0tMxmm4W0HYcCtK5sCvhWpHjwV3n46y6Kuv
cxgQpsrRwYNGWgMOai9X0ft5tXn5uqFyaGiolPBo7IlOLtbsTuG6Q2H8QbxJKokf
KjiYofA0EXrp/DtBnSlA1x7S5ODTRi25soHTIvrlJlljls4vRrqV4ZU33peicDY5
XbXlIX4XOu7pxNtDSpQYoWXnIIDo9/QfpJy4YUlVdGZTtLDcLW98Aqwxre/FWWUj
c8FeNDGSj0vPaL7Pm8XF4PXmKTW6xjf2MToFcUlAcJsEFsfm1XM=
=Hg5e
-----END PGP SIGNATURE-----
Merge tag 'phy-for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"As usual bunch of new device and driver support and updates to
existing drivers and addition of Manivannan to help with reviews.
New Support:
- Mediatek MT8196 DSI PHY support
- Renesas RZ/G3L usb2 support
- Qualcomm SM8475 QMP USB PHY and PCIe phy, IPQ9650 QMP PCIe PHY,
QUSB2 Phy for Shikra SoC, Hawi support for QMP PCIe phy and UFS
PHY. Glymur QMP PCIe Multi-PHY driver and multiple link-mode
support, ipq5210 PCIe phy support
- Spacemit USB3/PCIe comb PHY driver
Updates:
- Samsung hdptx driver improvements for modernizing the register
access and code cleanup
- Qualcomm drop duplicate v8 DP headers, improved runtime handling
for qmp drivers
- Rockchip clock lane phase tuning and 2500 Mbps support and TMDS
rate handling
- Freescale imx8mq improvements for runtime pm, pd handling"
* tag 'phy-for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (76 commits)
MAINTAINERS: Add Manivannan Sadhasivam as the Reviewer for Generic PHY Framework
phy: rockchip-samsung-dcphy: fix out-of-range max_register
phy: qcom: qmp-pcie: Add QMP PCIe Multi-PHY driver
dt-bindings: phy: qcom: Add Glymur QMP PCIe multiple link-mode PHY
phy: rockchip: samsung-hdptx: Consistently use bitfield macros
phy: rockchip: samsung-hdptx: Simplify GRF access with FIELD_PREP_WM16()
phy: rockchip: samsung-hdptx: Drop restrict_rate_change handling
phy: rockchip: samsung-hdptx: Consolidate consumer_put on error path
phy: rockchip: samsung-hdptx: Drop TMDS rate setup workaround
phy: rockchip: samsung-hdptx: Handle uncommitted PHY config changes
phy: rockchip: samsung-hdptx: Fix rate recalculation for 3.2GHz FRL
phy: rockchip: samsung-hdptx: Guard against clk rate integer underflow
phy: rockchip: samsung-hdptx: Prevent divide-by-zero when computing clk rate
phy: rockchip: samsung-hdptx: Fix rate recalculation for high bpc
phy: qcom: qmp-combo: Drop qmp_v4_calibrate_dp_phy
phy: qcom: qmp-combo: Correct pre-emphasis table for QMP v4 DP PHYs
phy: renesas: rcar-gen3-usb2: Ignore missing VBUS regulator
phy: qcom: qmp-pcie: Add support for SM8475 Gen3x1 PCIe0 port
phy: qcom: qmp-pcie: Add pcs_lane1 offset to V5 offsets
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Add SM8475 QMP PHY
...
|
||
|
Linus Torvalds
|
ab9b9b51ba |
soundwire updates for 7.3
- Bunch of Intel dmi quirks ghost list handling for Asus Zenbook Duo, Asus
ROG Zephyrus Duo and Asus Expertbook. Intel Peripheral
bra_block_alignment handling
- Cadence library BRA_NumBytes[8] support
- Qualcomm SCP address paging, bus mclk_freq support. Increase of data
ports to 17 and driver improvements.
-----BEGIN PGP SIGNATURE-----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=rjmH
-----END PGP SIGNATURE-----
Merge tag 'soundwire-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Intel dmi quirks ghost list handling for Asus Zenbook Duo,
Asus ROG Zephyrus Duo and Asus Expertbook. Intel Peripheral
bra_block_alignment handling
- Cadence library BRA_NumBytes[8] support
- Qualcomm SCP address paging, bus mclk_freq support. Increase of
data ports to 17 and driver improvements
* tag 'soundwire-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: dmi-quirks: Disable ghost Realtek on Asus ROG Zephyrus Duo
soundwire: stream: validate slave port properties
soundwire: honor clock_reg_supported in the clock scaling check
soundwire: qcom: set the bus mclk_freq property
soundwire: dmi-quirks: Disable ghost Realtek on Asus Zenbook Duo
soundwire: intel_ace2x: handle the max_data_per_frame property
soundwire: get mipi-sdw-bra-mode-max-data-per-frame property
soundwire: intel: handle Peripheral bra_block_alignment
soundwire: Add bra_block_alignment property support
soundwire: cadence_master: add BRA_NumBytes[8] support
soundwire: bus.h: repair kernel-doc comments
soundwire: intel_auxdevice: Add cs42l44 to wake_capable_list
soundwire: qcom: add SCP address paging support
soundwire: dmi-quirks: add a global ghost list
soundwire: dmi-quirks: Disable ghost Realtek on Asus Expertbook
soundwire: qcom: Allocate sruntime array dynamically
soundwire: qcom: Fix port exhaustion check in stream_alloc_ports
dt-bindings: soundwire: qcom: Increase max data ports to 17
|
||
|
Linus Torvalds
|
8bfab832ad |
mailbox: updates for v7.3
- mhuv2: convert channel translation to fw_xlate() and use generic device
property APIs
- axiado: add AX3005 mailbox controller driver and DT bindings
- bcm2835: use platform_get_irq() and simplify probe error handling
- cix: fix DT property string typo and use dev_err_probe()
- exynos: add Exynos850 mailbox driver support and DT bindings
- microchip: add null check for devm_kasprintf()
- pcc: fix missed-interrupt command timeout, verify shared memory signature,
and notify clients on polled completion
- qcom: fix CPUCP PREEMPT_RT deadlock and NULL data crash, fix IPCC duplicate
channel allocation across holes, and add IPQ5210 APCS and Nord IPCC bindings
- riscv: validate RPMI notification buffer lengths and event payload bounds
- rockchip: manage peripheral clock with devm helper and drop unused struct field
- ti-msgmgr: convert bindings to DT schema
- misc: remove redundant dev_err()/dev_err_probe() on IRQ request failures
across drivers
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE6EwehDt/SOnwFyTyf9lkf8eYP5UFAmqLoQ8ACgkQf9lkf8eY
P5X5Yg//fV6vjCgnuCPSfL0z8RbGrE8WlY9XWmQnp5boKa7rjNVKedwkiPxNFMAw
ro/ERpyfxLSQziws/nonAr7bJ5yxrz6wHFU6++5rT9w5m4e0Y7meoKT6GEj+1bEy
1kQ/4xmaZSLkUUTJkndU6wGBWxt0GJHObUNzVJxx28E0f1OAQa4MojT96gcgx8tm
uPzaL6acBigsLRtlCUYgtTR5/CLi9ArJmzRYrWVNG07fxr4sSKuMWTp5Fu+te5/w
jLJXyEgdzIzbjKrysyQPt0Di3iR2raTlw/86bFQtqdk4GNBMjPcQQtc7qWhUsst8
XhjXm0OB8yHtJ0cn59yLeChWZ/2Cc+nPqWtYdtadWghuqnTGfdpjkS2sngPsNVRy
txEvyqgzszQcpAqemKVnVlKHBgq0D3VwMR3KQ/tUIWLgpxw5YcG4oczum/Cf+YOR
i3VVbxFKkzHjopzh8Gh7pgAuwY4uJnVEgOtFnQLGe6goLcs6nNmBAMe6wi2Ge5mQ
0ZxoAj1z7pylQPiAQViPYM1uJcgRWJx+B6dzfBJKKBSTsHmHPhjXVYqbs/5/RrU+
0iHNFVs2dQuKkyjgOQ/qX7Oas3uasc87nuTM7yyHfhFjgt3G+7XaDPETgVuBK/BX
/3vlpkQEjQFL5CJVcxCZ0/ZSQnwhx0Kr84qXEttq2LMl1Qlzq5w=
=rp2p
-----END PGP SIGNATURE-----
Merge tag 'mailbox-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- mhuv2:
- convert channel translation to fw_xlate()
- use generic device property APIs
- axiado:
- add AX3005 mailbox controller driver and DT bindings
- bcm2835:
- use platform_get_irq()
- simplify probe error handling
- cix:
- fix DT property string typo
- use dev_err_probe()
- exynos:
- add Exynos850 mailbox driver support and DT bindings
- microchip:
- add null check for devm_kasprintf()
- pcc:
- fix missed-interrupt command timeout
- verify shared memory signature
- notify clients on polled completion
- qcom:
- fix CPUCP PREEMPT_RT deadlock and NULL data crash
- fix IPCC duplicate channel allocation across holes
- add IPQ5210 APCS and Nord IPCC bindings
- riscv:
- validate RPMI notification buffer lengths and event payload bounds
- rockchip:
- manage peripheral clock with devm helper
- drop unused struct field
- ti-msgmgr:
- convert bindings to DT schema
- remove redundant dev_err()/dev_err_probe() on IRQ request failures
across drivers
* tag 'mailbox-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: (22 commits)
mailbox: add Axiado AX3005 mailbox driver
dt-bindings: mailbox: add Axiado AX3005 mailbox
dt-bindings: mailbox: Convert TI Message Manager to DT schema
mailbox: cix: fix DT property name string typo and use dev_err_probe()
mailbox: riscv-sbi-mpxy: validate RPMI notification lengths
mailbox: bcm2835: use platform_get_irq and simplify probe
mailbox: qcom-ipcc: fix duplicate channel allocation across holes
mailbox: mchp-ipc-sbi: Add null check for devm_kasprintf()
mailbox: Remove redundant dev_err()/dev_err_probe()
dt-bindings: mailbox: qcom: Add IPQ5210 APCS compatible
dt-bindings: mailbox: qcom-ipcc: Document Nord IPCC
mailbox: exynos: Add support for Exynos850 mailbox
dt-bindings: mailbox: google,gs101-mbox: Add samsung,exynos850-mbox
mailbox: pcc: Fix command timeout due to missed interrupt
mailbox: pcc: Check shared memory signature on request
mailbox: pcc: Notify clients on polled completion
mailbox: rockchip: drop unneeded runtime pointer (pclk)
mailbox: rockchip: disable pclk on probe failure and unbind
mailbox: qcom-cpucp: handle NULL data in send_data callback
mailbox: qcom-cpucp: fix PREEMPT_RT self-deadlock in IRQ handler
...
|
||
|
Linus Torvalds
|
cf9610f911 |
Pin control bulk changes for kernel v7.3
Core changes:
- Use the non-blocking mux_state_try_select() in the generic
MUX pin control back-end.
- Free pin maps on pinctrl_generic_to_map() failure in the core
helpers.
New drivers:
- Qualcomm Maili TLMM SoC pin control.
- Qualcomm PMG1110 PMIC pin control.
- Qualcomm Eliza LPASS LPI TLMM SoC pin control (this is for
the low power audio, LPASS = Low Power Audio SubSystem
portions).
- Upboard support on top of the Intel pin controller.
- Apple T6030 and T6031 support (just compatible strings).
- Samsung Exynos 8855 SoC pin control.
- Mediatek MT6858 SoC pin control.
- Rockchip RK3308B SoC pin control.
- Rockchip RV1106 SoC pin control.
- Airoha EN7523 SoC pin control.
- Airoha AN7563 SoC pin control.
Improvements:
- Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable.
- Qualcomm improvements on top of the Qualcomm PDC (power domain
controller) irqchip improvements from tglx:s tree.
- Qualcomm IPQ806x and IPQ9650 nonurgent pin grop fixups.
- The NPCM8xx driver has been put into shape fixing many pin and
group definitions.
- Some nonurgent Tegra 264 pin assignments are fixed up.
- Some nonurgent fixups to Airoha AN7581 and AN7583 registers and
pin assignments, missing features etc.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmqMBvYACgkQQRCzN7AZ
XXOCRw//aRnxM6R7HJkmcJt70749sE2GSbQ5Vx22zkRLRt8FA0QL4GdPQWjG+rwA
/Q5XhMv5TpSXaBo63fFyAEHEhgbuxlgyUMijpXuMFVHB4AKIcp0P9Mn+TfTkpsIu
QPIUktn2wqaIoFoAZj7G2KhXUyyeQnISplBSFl4wfpsJ25fjKqqeoiOMrMCVc05A
Hfgm047beur5vkvYBIwFG0BC992l9ucSQJ4jDEm2XtkQ/NqIQBd16lYdxrb6vkJu
Bj2qUH/GVQN3c+n2ZgfwVbkoWMum7VgBymxbnjhraJmQoGm27IQsnBtDnhD5bv6s
bk5Y6Vyji0kNhHYU5uBFwjDWmYt5PxjXynkeFuruNuBkqnioQCyoTNlIeiJf5pZv
kM0dBkR0eUTQVPrZX5kXbi9B2JqdbnkdhKbL2YQt1zV0uvs1m8xl3dLu+bvtHjEM
xNghQKkSDvSHDgulbjTcKEthILSA48Q+poCaOoYre8KIOc4I7novSal6UzcHoTH7
4D8+BnwJXbS5RRIG2snUWHRLB8aY+yuPlfAQBrAu0apuKWrnr2SjfWMMek1kDv57
U/iXjSKvjSUQc+sYhq+cPMrD8yYqjIgfg483p4L8xsTIi0Mer6UhnHcZJ82TONTa
K1A3iGlKOtw4jNFOeow8VAW8MyEHcnx3q70rgA2O+eH7WpT28rs=
=sSjn
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- Use the non-blocking mux_state_try_select() in the generic MUX pin
control back-end
- Free pin maps on pinctrl_generic_to_map() failure in the core
helpers
New hardware pin control:
- Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
(this is for the low power audio, LPASS = Low Power Audio SubSystem
portions)
- Upboard support on top of the Intel pin controller
- Apple T6030 and T6031 support (just compatible strings)
- Samsung Exynos 8855 SoC
- Mediatek MT6858 SoC
- Rockchip RK3308B and RV1106 SoCs
- Airoha EN7523 and AN7563 SoCs
Improvements:
- Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable
- Qualcomm improvements on top of the Qualcomm PDC (power domain
controller) irqchip improvements from tglx:s tree
- Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups
- The NPCM8xx driver has been put into shape fixing many pin and
group definitions
- Some non-urgent Tegra 264 pin assignments are fixed up
- Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
pin assignments, missing features etc"
* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
pinctrl: meson: sync some modify from A4
pinctrl: meson: a4: Add input enable pin configuration
pinctrl: realtek: rtd1625: remove unused group name spdif_sel
pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
Revert "Merge branch 'ib-rsk7204' into devel"
pinctrl: rockchip: Add RV1106 pinctrl support
dt-bindings: pinctrl: rockchip: Add RV1106 compatible
pinctrl: rockchip: Decode drive strength in the get function
pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
pinctrl: airoha: add support of an7563 SoC
dt-bindings: pinctrl: airoha: add support of an7563 pin controller
pinctrl: airoha: try to find chip scu node by phandle first
pinctrl: airoha: add support of en7523 SoC
dt-bindings: pinctrl: airoha: add support of en7523 pin controller
pinctrl: airoha: an7583: add support for olt pinmux
pinctrl: airoha: an7583: add support for pon_alt pinmux
pinctrl: airoha: an7583: add support for npu_uart pinmux
dt-bindings: pinctrl: airoha: an7583: add missed features
...
|
||
|
Dave Airlie
|
e91d58cb2f |
Merge tag 'drm-msm-next-2026-08-01' of https://gitlab.freedesktop.org/drm/msm into drm-next
Changes for v7.3 Bindings: - Added Shikra support - Document a840, a704, a722 Core: - Use drm_client buffers for fbdev emulation - teardown fixes - ARM32 DMA fixup - Remove objects from evict list when re-validated - Bunch of corner case and error path fixes DPU: - Dropped dev_pm_opp_set_rate(0) preventing burnout - Fixed SSPP offsets of Kaanapali DP: - Dropped dev_pm_opp_set_rate(0) preventing burnout - Cleaned up core code in preparation for MST support - Fixed prepare() to let Pipewire continue in case of the unplugged cable GPU: - Add support for a704 - Add support for a722 HDMI: - Simplifed register access Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <rob.clark@oss.qualcomm.com> Link: https://patch.msgid.link/CACSVV02Kp=J+w_RjEJbBbQnBYRb+SWdwMvVbCaAL70bq9EBagQ@mail.gmail.com |
||
|
Swark Yang
|
289413b807 |
dt-bindings: mailbox: add Axiado AX3005 mailbox
Add a devicetree binding for the Axiado AX3005 mailbox controller. The controller provides inter-processor communication channels between the host CPU and the coprocessor, with separate TX and RX register regions. Add the corresponding MAINTAINERS entry covering the binding. Signed-off-by: Swark Yang <syang@axiado.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com> |
||
|
Linus Torvalds
|
4352b8aee9 |
I3C for 7.3
New driver:
- AMD AXI I3C master controller
Subsystem:
- I3C Common Command Code (CCC) handling improvements, especially around GET
CCCs
- SETAASA device discovery support
- ACPI support for all existing DAA methods like SETDASA, SETNEWDA as well as
I2C devices on I3C bus
- IBI-based wakeup support
Drivers:
- dw: SETAASA support
- mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C controller support,
PIO queue management support for HCI v1.2
- renesas: improve suspend to RAM support, add runtime PM support
-----BEGIN PGP SIGNATURE-----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=77m4
-----END PGP SIGNATURE-----
Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull I3C updates from Alexandre Belloni:
"A new driver this cycle, for the AMD AXI I3C controller.
There are also new features such as IBI wakeup support, SETAASA device
discovery and ACPI support for the the DAA methods, meaning we can now
communicate with the SPD devices on DDR5 modules.
New driver:
- AMD AXI I3C master controller
Subsystem:
- I3C Common Command Code (CCC) handling improvements, especially
around GET CCCs
- SETAASA device discovery support
- ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
well as I2C devices on I3C bus
- IBI-based wakeup support
Drivers:
- dw: SETAASA support
- mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
controller support, PIO queue management support for HCI v1.2
- renesas: improve suspend to RAM support, add runtime PM support"
* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
i3c: dw: reduce do_daa time if there's no client
i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
i3c: dw: rename "pclk" to "apb" to match dt-binding
i3c: dw: make struct dw_i3c_cmd smaller
i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
i3c: renesas: Don't register devices when ENTDAA times out
i3c: master: dw-i3c-master: fix OD timing for first broadcast
i3c: mipi-i3c-hci: Advertise IBI wakeup capability
i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
i3c: master: Reject IBI requests from non-IBI-capable devices
i3c: master: Add helper to query bus wakeup requirements
i3c: master: Report wakeup events for IBIs
i3c: master: Support IBI-based wakeup capability
i3c: master: Fix potential UAF in i3c_device_match()
i3c: master: Fix potential UAF in i3c_device_uevent()
i3c: Make dev->desc locking assumptions explicit
i3c: master: Fix use-after-free of master->this
...
|
||
|
Linus Torvalds
|
570f7e331f |
pci-v7.3-changes
-----BEGIN PGP SIGNATURE-----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=cNUI
-----END PGP SIGNATURE-----
Merge tag 'pci-v7.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Resource management:
- Add hotplug reservation only once (not at each level of the
hierarchy) so bridge windows don't grow more than necessary (Ilpo
Järvinen)
Driver binding:
- Rework device matching so device ID lifetime only needs to cover
the probe path since dynamic IDs can be removed at any time (Gary
Guo)
Error handling:
- Update mappings of AER errors to agent & layer and log them for
each individual error when multiple errors detected (Lukas Wunner)
- Log Error Source only once, not twice in separate messages (Lukas
Wunner)
- Emit TLP Log only for unmasked errors (Lukas Wunner)
- Support Advisory Non-Fatal Errors (Lukas Wunner)
- Allow DPC on all Downstream Ports, not just Root Ports, when OS
controls AER (Darshit Shah)
ASPM:
- Program the same ASPM Control values for every function of
multi-function devices, as recommended by the PCIe spec (Krishna
Chaitanya Chundru)
- Avoid L0s for Realtek RTS525A, where it causes an AER interrupt
storm (Max Lee)
- Avoid ASPM L0s, L1, and L1 PM Substates based on 'aspm-no-l0s',
'aspm-no-l1' [1], and 'aspm-no-l1ss' DT properties (Krishna
Chaitanya Chundru)
Power management:
- Allow D3 for native hotplug-capable Root Ports on non-x86 platforms
(we avoid D3 for these ports on x86 because some old platforms
didn't validate it) (Manivannan Sadhasivam)
- Allow portdrv to claim Ports even if they don't support services
(AER, PME, DPC, hotplug, etc) so it can do power management (Brian
Norris)
Power control:
- Add support for PCIe WAKE# interrupt when described via DT (Krishna
Chaitanya Chundru)
- For the TC9563 PCIe switch:
- Take a reference on the I2C adapter to avoid uninterruptible
hang when unloading an I2C module while in-use (Johan Hovold)
- Update DT binding and driver to restrict Tx Amplitude, DFE and
N_FTS to USP, DSP1 and DSP2 (Manivannan Sadhasivam)
- Power off only external-facing ports (DSP1, DSP2), leaving USP
and DSP3 (aka VDSP) powered up (Manivannan Sadhasivam)
- Move integrated MAC Endpoint out of the list of internal ports
and configure it separately (Manivannan Sadhasivam)
Virtualization:
- Add ACS quirk for Pericom PI7C9X2G608 switches (Tim Harvey)
- Fix a long-standing bug in the Intel PCH Root Port MPC ACS quirk
that didn't update the intended INTEL_MPC_REG_IRBNCE bit because it
used a 16-bit config write when a 32-bit write was intended
(Mohamad Raizudeen)
Procfs:
- Avoid spurious runtime PM wakeup on config space accesses that are
outside config space and fail before reaching PCI (Krzysztof
Wilczyński)
- Warn on user-space writes to kernel-exclusive config space regions,
as we already do for sysfs (Krzysztof Wilczyński)
- Check credentials of opener, not reader, for config space reads, as
we already do for sysfs (Krzysztof Wilczyński)
Sysfs:
- In pci_write_legacy_io(), avoid out-of-bounds reads from the user
buffer and fix incorrect ioport write data (1-byte writes on
little-endian powerpc, 2- and 4-byte writes on big-endian powerpc)
(Krzysztof Wilczyński)
- In pci_read_legacy_io(), fix incorrect ioport read data for 2- and
4-byte reads on big-endian powerpc (Krzysztof Wilczyński)
- Fix I/O port accessor argument order in Alpha pci_legacy_write()
(Krzysztof Wilczyński)
- Avoid spurious runtime PM wakeup on config space accesses that are
outside config space and fail before reaching PCI (Krzysztof
Wilczyński)
- Return -EINVAL, not -ENODEV, for mmap of I/O BAR that fails because
the arch doesn't support it, as we do for procfs (Krzysztof
Wilczyński)
- Check for LOCKDOWN_PCI_ACCESS for legacy_io and legacy_mem, as we
do for other config space accessors (Krzysztof Wilczyński)
Peer-to-peer DMA:
- Add Nvidia Vera Rubin to list of platforms that support P2PDMA
(Leon Romanovsky)
Endpoint framework:
- Check doorbell SUCCESS bit in pci_endpoint_test to avoid treating
some failures as successes (Niklas Cassel)
- Fail doorbell test when the trigger IRQ is missed (Niklas Cassel)
New native PCIe controller drivers:
- Add DT binding and driver for NVIDIA Tegra264 (Thierry Reding)
Native PCIe controllers:
- Use common wait time definitions for PCIe link monitoring instead
of defining driver-private duplicates (Thierry Reding)
Generic host bridge driver:
- Fix NULL pointer dereference that caused enumeration failures on
32-bit CAM systems (Steffen Persvold)
Amlogic Meson PCIe controller driver:
- Correct the PERST# GPIO state so it remains asserted until power
and REFCLK become stable to fix enumeration failure (Ronald
Claveau)
ASPEED PCIe controller driver:
- Switch to irq_domain_create_linear() so we can obsolete
irq_domain_add_linear() (Jiri Slaby)
Cadence PCIe controller driver:
- Add MODULE_DEVICE_TABLE to generate module aliases for OF-based
module autoloading (Pengpeng Hou)
- Add debugfs 'ltssm_status' file for LGA- and HPA-based Cadence
controllers (Hans Zhang)
- Support up to x4 (not x2) lanes for J200 (Takuma Fujiwara)
- Fix host/endpoint dependencies for cadence-plat driver to fix link
error when cadence-plat is built-in but the host or endpoint driver
is modular (Aksh Garg)
Freescale i.MX6 PCIe controller driver:
- Add imx6 intr/aer/pme interrupt lines for i.MX95 (Richard Zhu)
- Remove PERST# checking from pci_host_common_parse_port() so callers
can decide whether to fall back to legacy DT binding with PERST# in
the host bridge (Sherry Sun)
- Fix build issues when PCI_PWRCTRL_GENERIC or PCI_HOST_COMMON is a
module (Arnd Bergmann)
- Create pwrctrl devices only once by doing it from imx_pcie_probe()
instead of imx_pcie_host_init(), which is used during both probe
and resume (Sherry Sun)
- Use 'dw_pcie_rp->skip_pwrctrl_off' to avoid powering off devices
during suspend to preserve wakeup capability (Sherry Sun)
- Add runtime PM support for i.MX95 to allow dynamic power management
when the link is idle (Richard Zhu)
Intel VMD host bridge driver:
- Support device ID 0x28C1 and assume that BIOS has already
enumerated the hierarchy below VMD and stored bus range info for OS
to use (Nirmal Patel)
- Add support for VMCONFIG BUS_RESTRICT_CFG=3, which makes it
possible to enumerate downstream devices on Intel Arrow Lake-HX
systems and probably others (Ali Alaei)
- Pay attention to _OSC negotiation for VMD hierarchy only when
running on bare metal, not when running in a VM (Nirmal Patel)
- Add Nova Lake (NVL) and Dunlow (DNL) Device IDs (Szymon Durawa)
MediaTek PCIe controller driver:
- Add support for PCIe controller in EcoNet EN7528 and EN751221 SoCs
(Caleb James DeLisle)
MediaTek PCIe Gen3 controller driver:
- Add mediatek-gen3 'memory-region' for restricted DMA buffer
(Chen-Yu Tsai)
NVIDIA Tegra264 PCIe controller driver:
- Distinguish Tegra264 C0 PCIe controller for internal GPU from C1-C5
controllers so the unit address matches the first 'reg' entry
(Thierry Reding)
- Add Tegra264 Root Port stanzas to prepare for generic WAKE#
handling (Thierry Reding)
Qualcomm PCIe controller driver:
- Add IPQ9650 compatible with global interrupt (Kathiravan
Thirumoorthy)
- Add IPQ5210 compatible with IPQ9574 fallback (Varadarajan
Narayanan)
- Add DT binding and driver support for Hawi SoC (Matthew Leung)
- Skip PERST# GPIOs provided by downstream PCIe devices, which should
be handled by drivers of those devices (Manivannan Sadhasivam)
- Stop advertising Attention Button Present (no Qcom SoCs support
Attention Buttons) so pciehp can use Presence Detect Changed events
(Qiang Yu)
Renesas R-Car PCIe controller driver:
- Add rcar-gen4-pci-host optional 'msi-parent' for GIT ITS (Marek
Vasut)
- When MSI is enabled but iMSI-RX is not used, configure AXIINTC to
allow GIT ITS to handle MSI (Marek Vasut)
- Refactor GIC600 implementation to make it easier to add platforms
that only support 32-bit addressing (Marek Vasut)
- Add Renesas R-Car Gen4 S4/V4H/V4M to the list of GIC600
integrations that only support 32-bit addressing (Marek Vasut)
Renesas RZ/G3S PCIe controller driver:
- Add DT binding and driver support for RZ/V2H(P) SoC, which contains
two PCIe controllers, configured either as a single x4 link or two
independent x2 link controllers (Lad Prabhakar)
SpacemiT K1 PCIe controller driver:
- Add missing MODULE_DEVICE_TABLE() to generate module alias info for
OF-based module autoloading (Pengpeng Hou)
StarFive PCIe controller driver:
- Fix resource leaks on error paths in host_init() (Ali Tariq)
- Fix runtime PM handling and teardown ordering to avoid register
access while power or clocks are disabled (Ali Tariq)
- Check for runtime PM resume failure to avoid register access while
power or clocks are disabled (Ali Tariq)
Synopsys DesignWare PCIe controller driver:
- Add LECARC PMU IDs to the DWC RAS/DES VSEC list so it can take
advantage of the existing debugfs support for silicon debug, error
injection, and event counters (Brett Zhou)
- Factor pcie_valid_speed() and pci_bus_speed2lnkctl2() out of bwctrl
so they can be shared by the DWC core (Hans Zhang)
- Flush MSI writes from endpoint before unmapping the iATU, as we
already do for MSI-X writes (Niklas Cassel)
- Unmap MSI iATU window before mapping MSI-X window, to avoid a
subsequent MSI write using a disabled aperture and losing the
interrupt (Niklas Cassel)
- Change endpoint .pre_init() and .init() callbacks to return errors
and handle them (Marek Vasut)
UltraRISC PCIe controller driver:
- Add 'core', 'dbi', and 'aux' clocks to DT binding and manage them
in the driver (Jia Wang)
- Use module_platform_driver() since this may be built as a module,
though not removable because IRQs can't be safely disposed (Jia
Wang)
MicroSemi Switchtec management driver:
- Add Microchip PCI1008 device ID and include it in NTB DMA alias
quirk (Logan Gunthorpe)
Miscellaneous:
- Document how to write PCI Host Controller drivers (Manivannan
Sadhasivam)
- Fix typos in documentation (D'Orus Tsitera)
- Use %pe format specifier to print error pointers so we get symbolic
errname when available (Krzysztof Wilczyński)"
* tag 'pci-v7.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (124 commits)
PCI: vmd: Add Nova Lake (NVL) and Dunlow (DNL) Device IDs
PCI: tegra264: Add Tegra264 support
dt-bindings: PCI: tegra264: Switch to PCIe Root Port bindings
dt-bindings: PCI: tegra264: Strictly distinguish C0 from C1-C5
PCI/AER: Support Advisory Non-Fatal Errors
PCI: Fix 32-bit config write in Intel PCH Root Port MPC ACS quirk
PCI: dwc: Handle return value from endpoint .pre_init callback
PCI: dwc: Handle return value from endpoint .init callback
PCI: dwc: Add PCI ID for LECARC PCIe PMU
PCI/ASPM: Mask ASPM states based on Devicetree properties
PCI/ASPM: Disable/restore ASPM on every function for multi-function devices
Documentation: PCI: Document how to write PCI Host Controller drivers
PCI/ASPM: Use pcie_capability_clear_and_set_word() for ASPM disable/restore
PCI: Add support for PCIe WAKE# interrupt
PCI: Allow D3 for native hotplug-capable Root Ports on non-x86 platforms
dt-bindings: PCI: Correct white-space style
PCI/ASPM: Avoid L0s for Realtek RTS525A
PCI: ultrarisc: Use module_platform_driver()
PCI: ultrarisc: Get and enable DP1000 PCIe controller clocks
dt-bindings: PCI: ultrarisc: Add required DP1000 PCIe clocks
...
|
||
|
Lad Prabhakar
|
1ffb5be3e4 |
dt-bindings: rtc: renesas,rzn1-rtc: Add RZ/T2H and RZ/N2H support
Add compatible strings for the RTC block found on the Renesas RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs. These SoCs integrate a closely related variant of the RZ/N1 RTC IP. Unlike RZ/N1, they do not implement the RTCA0SUBU register. This is not a limitation for Linux support, as these registers are not used when the RTC operates in "scmp" clock mode, which is required on RZ/T2H and RZ/N2H due to their 195.3 kHz input clock. The RZ/T2H RTC variant also supports a 1Hz output signal on the RTCAT1HZ pin, controlled by the RTCA0CTL1[RTCA01HZE] bit. This bit is marked as reserved in the RZ/N1 hardware manual. Update the binding schema to require the additional clock inputs used by these SoCs. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://patch.msgid.link/20260821211032.13554-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> |
||
|
Linus Torvalds
|
df51bdc5e8 |
* Raw NAND changes
- Sunxi: Support added for the H616 compatible
- Qcom: Support added for the MDM9607 compatible
- Support for the Toshiba TC58NVG1S3H part
- GPMI: New debugfs entry to expose the chip geometry
- PL353: Timing updates and software ECC support have been fixed
* SPI NAND changes
- fmsh: Support added for FM25G{01,02}B chips
- HeYangTek: Support added for HYF1GQ4UDACAE
Aside from these main changes, there is a high load of misc fixes and
hardening changes, and exceptionally no SPI NOR change.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmqK6JQACgkQJWrqGEe9
VoQa/QgAjuWoPOE1euZlAwwAwje44JZn+FfONyIjUeEfq8SFH9nchfyVpEKF95tU
PF3YkhCCKavD0FNeTPpJoAhEYsqomVQmLLhUg+smoj5ii7Rudihpwn1f+7QpYrXS
jdmWCz3YigILWL3B4CE0GWfUR+GhBH8kF+N+5/rcAddC9XC/22Y/rKKQ7LDcC6TM
AH6OT+1J92lX/rSAyym/BHAmqydN6ZNKe4+LY8kghRd01XNBgMx1a2WoZ4RL+v3a
J7sCoG6YCZE7pm9UqPHQfIWHtDyrTbQKy51jgUNyy8TdbTrhiTwuhO5LgYq/WrS0
Y3PGbxWV0tcvRTaYvzNFCKyaZVjIxg==
=dLT3
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"Raw NAND changes:
- Sunxi: Support added for the H616 compatible
- Qcom: Support added for the MDM9607 compatible
- Support for the Toshiba TC58NVG1S3H part
- GPMI: New debugfs entry to expose the chip geometry
- PL353: Timing updates and software ECC support have been fixed
SPI NAND changes:
- fmsh: Support added for FM25G{01,02}B chips
- HeYangTek: Support added for HYF1GQ4UDACAE
Aside from these main changes, there is a high load of misc fixes and
hardening changes, and exceptionally no SPI NOR change"
* tag 'mtd/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (30 commits)
mtd: rawnand: sunxi: fix H6/H616 controller timings
mtd: rawnand: sunxi: describe tADL and tWHR delays
mtd: rawnand: sunxi: group controller delay tables
mtd: maps: remove dead select of MTD_CFI_BE_BYTE_SWAP
mtd: rawnand: gpmi: add debugfs entry for BCH geometry
mtd: rawnand: validate ONFI extended parameter page sections
mtd: rawnand: sunxi: add H616 MBUS DMA support
mtd: spinand: fmsh: fix FM25G01B/FM25G02B Quad I/O read dummy cycles
mtd: part: reject MTDPART_OFS_RETAIN in mtd_add_partition()
mtd: mpc5121_nfc: use platform for irq and ioremap
mtd: mtdoops: free page bitmap when the backing MTD is removed
mtd: mtdswap: Avoid freeing registered blktrans device twice
mtd: afs: validate v2 image info bounds
mtd: intel-dg: Fix runtime PM error path in probe
mtd: nand-omap2: Move omap_nand_ids[] to raw nand driver
mtd: rawnand: add Toshiba TC58NVG1S3H
mtd: nand: realtek-ecc: add missing MODULE_DEVICE_TABLE()
mtd: rawnand: qcom: Add MDM9607 compatible
mtd: rawnand: qcom: Make has_onfi_read_op separate from qpic_version2
mtd: rawnand: qcom: Make "aon" clock optional
...
|
||
|
Fenglin Wu
|
660ee6792e |
dt-bindings: input: Add Qualcomm SPMI PMIC haptics
Add binding document for the haptics module inside Qualcomm PMIC PMIH0108. Assisted-by: Claude:claude-4-8-opus Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com> Link: https://patch.msgid.link/20260806-qcom-spmi-haptics-v6-1-19fcecd5204f@oss.qualcomm.com [robh: Drop example] Signed-off-by: Rob Herring (Arm) <robh@kernel.org> |
||
|
Bjorn Helgaas
|
b130a2caf5 |
Merge branch 'pci/controller/tegra264'
- Distinguish Tegra264 C0 PCIe controller for internal GPU from C1-C5 controllers so the unit address matches the first 'reg' entry (Thierry Reding) - Add Tegra264 Root Port stanzas to prepare for generic WAKE# handling (Thierry Reding) - Add NVIDIA Tegra264 driver (Thierry Reding) * pci/controller/tegra264: PCI: tegra264: Add Tegra264 support dt-bindings: PCI: tegra264: Switch to PCIe Root Port bindings dt-bindings: PCI: tegra264: Strictly distinguish C0 from C1-C5 |
||
|
Bjorn Helgaas
|
003bb33da9 |
Merge branch 'pci/controller/rzg3s-host'
- Add DT binding and driver support for RZ/V2H(P) SoC, which contains two PCIe controllers, configured either as a single x4 link or two independent x2 link controllers (Lad Prabhakar) * pci/controller/rzg3s-host: PCI: rzg3s-host: Add support for RZ/V2H(P) SoC PCI: rzg3s-host: Prepare System Controller handling for multiple controllers PCI: rzg3s-host: Use shared reset controls for power domain resets dt-bindings: PCI: renesas,r9a08g045-pcie: Add RZ/V2H(P) support |
||
|
Bjorn Helgaas
|
3d3fce9435 |
Merge branch 'pci/controller/dwc-ultrarisc'
- Add 'core', 'dbi', and 'aux' clocks to DT binding and manage them in the driver (Jia Wang) - Use module_platform_driver() since this may be built as a module, though not removable because IRQs can't be safely disposed (Jia Wang) * pci/controller/dwc-ultrarisc: PCI: ultrarisc: Use module_platform_driver() PCI: ultrarisc: Get and enable DP1000 PCIe controller clocks dt-bindings: PCI: ultrarisc: Add required DP1000 PCIe clocks |
||
|
Bjorn Helgaas
|
1579362594 |
Merge branch 'pci/controller/dwc-qcom'
- Add DT binding and driver support for Hawi SoC (Matthew Leung) - Skip PERST# GPIOs provided by downstream PCIe devices, which should be handled by drivers of those devices (Manivannan Sadhasivam) - Stop advertising Attention Button Present (no Qcom SoCs support Attention Buttons) so pciehp can use Presence Detect Changed events (Qiang Yu) * pci/controller/dwc-qcom: PCI: qcom: Clear Attention Button Present in Slot Capabilities PCI: qcom: Rename qcom_pcie_set_slot_nccs() to qcom_pcie_set_slot_cap() PCI: qcom: Skip PERST# GPIOs provided by downstream PCIe devices PCI: qcom: Add support for Hawi dt-bindings: PCI: qcom: Document Hawi and Maili PCIe Controllers |
||
|
Bjorn Helgaas
|
625ae0ff41 |
Merge branch 'pci/dt-binding'
- Add qcom IPQ9650 compatible with global interrupt (Kathiravan Thirumoorthy) - Add qcom IPQ5210 compatible with IPQ9574 fallback (Varadarajan Narayanan) - Add imx6 intr/aer/pme interrupt lines for i.MX95 (Richard Zhu) - Add mediatek-gen3 'memory-region' for restricted DMA buffer (Chen-Yu Tsai) - Add rcar-gen4-pci-host optional 'msi-parent' for GIT ITS (Marek Vasut) - Correct some white-space issues (Krzysztof Kozlowski) * pci/dt-binding: dt-bindings: PCI: Correct white-space style dt-bindings: PCI: rcar-gen4-pci-host: Document optional msi-parent dt-bindings: PCI: mediatek-gen3: Allow memory-region for restricted DMA buffer dt-bindings: PCI: mediatek-gen3: Add support for MT8189 SoC dt-bindings: PCI: imx6q-pcie: Add i.MX95 optional intr/aer/pme interrupts dt-bindings: PCI: qcom,pcie-ipq9574: Add IPQ5210 compatible dt-bindings: PCI: qcom,pcie-ipq9574: Add IPQ9650 compatible |
||
|
Linus Torvalds
|
2be02a7c99 |
power supply and reset changes for the 7.3 series
* power-supply core - Add PbAc, NiZn, RAM, and ZnAr battery chemistry types - Create LED triggers based on properties instead of device type - Provide power_supply_get_system_batteries() for usage with USB-C - Add registration init callback for race-free device setup * power-supply drivers - new TI BQ25630 charger driver - new SG Micro sgm41542 charger driver - bq257xx: Add support for BQ25792 - max8903: add DC and USB input current-limit controls - max17042_battery: Initialize MAX17055 from battery info - sbs-battery: map newly introduced battery chemistries - drop extra error messages for IRQ request failures - lot's of driver removal race condition fixes - misc. small cleanups and fixes * reset drivers - add MCF5441x RCM power-on reason driver - misc. small cleanups and fixes -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAmqHhI8ACgkQ2O7X88g7 +prz8A//RwS840YNf/HU54EoG9daMtipcZ6RJrSoY0UiS4oYxERuOoP3azaj/B+l 6x7q8sp84E6Ejrrt1Hr6guKvRclVbgFJwagbqbzZ1l/EQvxgHPo2grHlSHSpqoPM NafNyFyrItuC9T02XkI1AnDcrXBIXZ4EXxIH2pe/da027lUGkAZO56oxmX5WDBRc OsUvCBBMOe2wlLnQErT7AfEFOic4H4Uz6j+CDwitHGqPcctpLR9JuBiB5QDFKaeY Nf3GDxRG1pahCCgs9ltOAHKx3UmS71xwfEWoig4h4r88OpV59Mm3fMhteTSt2nAl 5c5tkSwBpnlTdMJdJkrlR4bmGMGjAdd0+MkqBivWGev1NJMNo/QGoh0a7pVUFGSt lPgy0vA51+ZBGmcEY6lh4uOlJ0Pn9Sd04Ao/En+0fd0r+jlq3x1JebwqTeFt9pNd 5zXxl2UKpd6xaF6EZoV59AI/DCwNKxHpFfh1IMvBsfFAqe/ULrlr4v+AD+TCUMdr PLU/jdg9j8iIXo7s5U9Xymba5/cxFmy95u+fsVtjjFhHdSRMcKjwRS3mg0L5W+GN umy/2ewraTNsHCLZ7bS0/OL/rSv6nnL5DH/Jk02pkws2lpmVL5x+xeCK4UTJy6rA rMHa+Ex5/i+fW5n5XBgbDmRu/ihojcsVX5Xz/7/LqyuHvTlLWj4= =TxN7 -----END PGP SIGNATURE----- Merge tag 'for-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - Add PbAc, NiZn, RAM, and ZnAr battery chemistry types - Create LED triggers based on properties instead of device type - Provide power_supply_get_system_batteries() for usage with USB-C - Add registration init callback for race-free device setup Power-supply drivers: - new TI BQ25630 charger driver - new SG Micro sgm41542 charger driver - bq257xx: Add support for BQ25792 - max8903: add DC and USB input current-limit controls - max17042_battery: Initialize MAX17055 from battery info - sbs-battery: map newly introduced battery chemistries - drop extra error messages for IRQ request failures - lot's of driver removal race condition fixes - misc small cleanups and fixes Reset drivers: - add MCF5441x RCM power-on reason driver - misc small cleanups and fixes" * tag 'for-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (115 commits) power: supply: bq27xxx: bq27z561: fix invalid AverageEnergy address power: supply: bq27xxx: bq28z610: fix invalid AverageEnergy address power: supply: bq27xxx: bq27520g4: fix REG_TTES address power: supply: max17040: synchronize work cancellation on suspend power: supply: lp8727: fix use-after-free in lp8727_release_irq() power: supply: bq256xx: drain usb_work before freeing the charger power: supply: qcom_battmgr: fix battery chemistry strncmp length power: supply: bd99954: Drop bad register fields power: supply: bd71828: Do not hide errors power: supply: bd71828: Drop duplicate power-supply property power: supply: bd71828: Fix current direction power: supply: bd71815: Fix temperature reading power: supply: add stubs for notifier registration helpers power: supply: ucs1002: fix use-after-free on remove power: supply: lp8788-charger: fix use-after-free on remove power: supply: ab8500_fg: fix use-after-free on remove power: supply: bq24257: fix use-after-free on remove power: supply: qcom_battmgr: fix use-after-free power: supply: max17040: drop incorrect I2C functionality check power: supply: charger-manager: register regulators before exposing sysfs ... |
||
|
Linus Torvalds
|
f96718fc1f |
MMC core:
- Reject invalid perdev_minors for the block device before division - Document DT fixed-layout NVMEM provider support for eMMC cards MMC host: - Convert a couple of plain text DT bindings to the yaml format - bcm2835: DMA mapping improvements - cqhci: Fix sparse warnings for endian conversions - dw_mmc: Stop and complete DMA also in busy state - dw_mmc-rockchip: Add support for the RV1106 variant - litex_mmc: Add dynamic bus width support - moxart: Propagate error for DMA completion timeout - pxamci: Remove PXA remnants for the PXA93x support - rtsx_usb_sdmmc: Avoid USB I/O in runtime autosuspend - rtsx_usb_sdmmc: Suppress false CD after init timeout - sdhci_am654: Add Judith Mendez as maintainer - sdhci-esdhc-mcf: Do not use readl()/writel() on ColdFire - sdhci-msm: Extend the DT bindings for ICE - sdhci-tegra: Add support for Tegra264/Tegra238 variants - sunxi: Add support for the Allwinner A733 variant - via-sdmmc: Clean up card detect work at remove and in probe error path -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmqIRy0QHHVsZmhAa2Vy bmVsLm9yZwAKCRD+JoQlc1iMKVRSD/9d0JSLTRbCQ/XkNvRXfmVXCFJ8XLZCMu1M YCuJfO1+O1R+P3XVjMCIclqNwYzrETp1f96YRJ7AF0lkkPa890Cuq8p2ZGhElT6M o1mes+qaK6T2hg4Yw2H7auKZdlN7Xl3ez4cxrYq17n2RUcrzzdUbmGR87eym3el7 E07INRzGDFZ2n8/JS13yf1BRCvkP1bRnrHCOHAll8d7xvscCaZFUdz2TpfGjrmDV 7SsnN4Yns/2y9Xq5MOmc5kh8hglNclIpA3D7MGsKkfj6JMxmOR5iUytgMxnXZQYz YUEopIJ2nbEGv4umhTHnIEQBB1UNWO+akz5KnCEY+juKS/MhQ7VpBleGfS5WPCNr 954VcUXvjIN+5QIgK1ZlhWyL9056+MEApYSkqSoAfYtDX05LkFbD5Xmir8G/RtpK FJ9K/ps6YOMliGwCls5zfv1HO1jhjDiaToJxSSwXIfJN6uUNP9+64BVtI6no3XvU nQIDFF1rDbCwZTaHRvvbKhogR1Rja/bMUXnDzxH/8Pvk5jAteDmbMpR7q6CZdn6J OZ85gMm1XxTfbfmVk0rW027jUn7s4D7TX3G1W9CsZKB1QZd4FRnZ4snnoYOYNHWO aRBHIUkio+20BEqXjHz5A9+LSw627/PoZIiQUQsl7JTrMvaYIB1AUDWdoJ0wc9vU TLxdIpM/GQ== =RjJ2 -----END PGP SIGNATURE----- Merge tag 'mmc-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC updates from Ulf Hansson: "MMC core: - Reject invalid perdev_minors for the block device before division - Document DT fixed-layout NVMEM provider support for eMMC cards MMC host: - Convert a couple of plain text DT bindings to the yaml format - bcm2835: DMA mapping improvements - cqhci: Fix sparse warnings for endian conversions - dw_mmc: Stop and complete DMA also in busy state - dw_mmc-rockchip: Add support for the RV1106 variant - litex_mmc: Add dynamic bus width support - moxart: Propagate error for DMA completion timeout - pxamci: Remove PXA remnants for the PXA93x support - rtsx_usb_sdmmc: Avoid USB I/O in runtime autosuspend - rtsx_usb_sdmmc: Suppress false CD after init timeout - sdhci_am654: Add Judith Mendez as maintainer - sdhci-esdhc-mcf: Do not use readl()/writel() on ColdFire - sdhci-msm: Extend the DT bindings for ICE - sdhci-tegra: Add support for Tegra264/Tegra238 variants - sunxi: Add support for the Allwinner A733 variant - via-sdmmc: Clean up card detect work at remove and in probe error path" * tag 'mmc-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (35 commits) ARM: PXA: Fix build error for PXA93x dt-bindings: mmc: sunxi: add compatible string for Allwinner A733 MMC0/1/2 dt-bindings: mmc: Document fixed-layout NVMEM provider support mmc: sdhci-tegra: Add Tegra264 SoC data dt-bindings: mmc: tegra: Document Tegra264 SDHCI mmc: sdhci-tegra: Add Tegra238 SoC data dt-bindings: mmc: tegra: Document Tegra238 SDHCI mmc: omap_hsmmc: use platform_get_irq_optional for wake IRQ mmc: via-sdmmc: cancel card-detect work on remove mmc: via-sdmmc: stop card-detect handling on probe failure mmc: moxart: use platform helpers for resource and IRQ mmc: host: Remove redundant dev_err()/dev_err_probe() mmc: bcm2835: DMA mapping improvements mmc: dw_mmc: move declaration of dw_mci_pmops dt-bindings: mmc: rockchip-dw-mshc: Add RV1106 compatible mmc: rtsx_usb_sdmmc: suppress false CD after init timeout misc: rtsx_usb: avoid USB I/O in runtime autosuspend mmc: sdhci-of-dwcmshc: Log eMMC reset calls mmc: block: reject invalid perdev_minors before division mmc: sdhci-of-ma35d1: add missing MODULE_DEVICE_TABLE() ... |
||
|
Linus Torvalds
|
35748ddd3b |
SCSI misc on 20260821
One new driver: leapraid (similar to mpi3mr but OK'd by Broadcom). The usual suspects for driver updates (ufs, qla2xxx, smartpqi, zfcp, fnic, ibmvfc) plus a few small core updates: a fix for an uninitialized sg list pad bytes plus the removal of the dma mask check for max sectors. The big update in the sd driver is mostly code refactoring for obscure error leg handling. Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> -----BEGIN PGP SIGNATURE----- iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaogFixsUgAAAAAAEAA5t YW51MiwyLjUrMS4xMiwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy c2hpcC5jb20ACgkQ50LJTO6YrIW3+AEAk1xhTuoYYPb87dWVpo74D0KwOjw144uQ jxBbQRx3mV8A/1kzGC5/eGU5XcruUaU6DXcYE7KSb+5aqFdjcHhj1e8a =7IX1 -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "One new driver: leapraid (similar to mpi3mr but OK'd by Broadcom). The usual suspects for driver updates (ufs, qla2xxx, smartpqi, zfcp, fnic, ibmvfc) plus a few small core updates: a fix for an uninitialized sg list pad bytes plus the removal of the dma mask check for max sectors. The big update in the sd driver is mostly code refactoring for obscure error leg handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (195 commits) scsi: fnic: Fix built-in NVMe/FC build scsi: fnic: Fix invalid comparison for error scsi: core: Fill in DMA padding bytes in scsi_alloc_sgtables() scsi: zfcp: Enable CONTEXT_ANALYSIS scsi: zfcp: Add __must_hold() attribute to zfcp_qdio_sbal_get() scsi: fnic: Use GFP_ATOMIC for VLAN alloc under spinlock scsi: storvsc: Support manual scans for all Hyper-V targets scsi: sd: Fix sd_done() sense handling condition scsi: sd: Fix special_vec mempool leak when scsi_alloc_sgtables() fails scsi: sd: Fix error handling in sd_probe() after large pool creation failure scsi: leapraid: Add driver documentation scsi: leapraid: Add new SCSI driver scsi: ufs: Add support for the aggregated read query opcode scsi: ufs: Use unsigned types for the BSG query scsi: ibmvfc: Fix spelling mistake "Deleteing" -> "Deleting" scsi: qla2xxx: Update version to 12.00.00.2607b2 scsi: qla2xxx: Bound i2c->length in I2C bsg handlers scsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers scsi: qla2xxx: Validate BSG request_len before reading vendor_cmd[] scsi: qla2xxx: Zero-init bsg stack buffers to avoid info leak ... |
||
|
Linus Torvalds
|
4e69c1856b |
drm for 7.3-rc1
perf: - export perf_allow_ APIs for xe udmabuf: - remove default size limit of 64MB rust: - i/o rework (signed tag from driver-core tree) - add registration guard and registration data - fix unbounded lifetimes in ioctl handler args - fix a drm_dev_register race - gem_shmem: add DmaResvGuard helper - gpuvm: require send/sync for driver data - implement send/sync for GpuVaAlloc and GpuVmBo - add SmContext lifetime - rename dma_handle to dma_address - change pci_sriov_get_totalvfs return to unsigned int core: - create drm_of_get_panel_orientation - send per-connector hotplug events - add thunderbolt UBHR tunneling support connector: - add color format property dmem: - introduce a peak file - accept one region per limit - add dmemcg support for eviction gpusvm: - reorg code to give drivers more flexibility atomic: - add create_state callback and helper - add documentation on atomic commit lifetime buddy: - add per-order free - add used block scoreboard - fix UAF - test buffer clearance on resume - add phys_addr->block helper gem: - drop DRIVER_GEM_GPUVA flag ttm: - be more aggressive allocating below protection limit sched: - add test suite for concurrent job submissions hdmi: - hook the color format property in helpers mipi-dsi: - add MIPI_DSI_MODE_DSC_ALL_SLICES_IN_PKT bridge: - add atomic create callbacks - drop atomic reset - display-connector: don't autoenable HPD IRQ - trigger initial HPD for DP - ti-sn65dsi83: remove NO_HFP and NO_HBP mode flags - analogix_dp: switch to DP link training helpers dp: - add support for DSC max delta BPP edid: - parse panel type from DisplayID 2.x Display Parameters sysfb: - improve panel, stride, framebuffer size validation panel: - implement ref counting for struct drm_panel - himax-hx83121a: add backlight regulator support - novatek-nt36672a: Inline panel init sequences - visionox-vtdr6130: enable DSC - novatek-nt37801: Use mipi_dsi_*_multi() functions - samsung-s6d16d0: Fix prepare error handling - support Novatek NT36536 plus DT bindings - sofef00: fix backlight updates - osd101t2587: use mipi_dsi_*_multi interface - panel-edp: adjust timing for AUO displays - panel-lvds: support Opto Logic SCX1001511GGC49 - panel-simple: support Kyocera tcg070wvlq - panel-edp: quirks - AUO B116XAT04.3, CMN N116BCP-EA2, CSW MNB601LS1-8 - BOE NV116WH2-M30, BOE NT116WHM-N21, BOE NV116FH1-M31 - BOE NV116FH1-M30, NV140FHM-N5B, TM156VDXP25 - BOE NE160QDM-NY1, MB116AS01 - new: - Samsung ATNA40HQ08-0, Anbernic TD4310 - Chipone ICNA35XX, Ilitek ILI9488 - Ilitek ILI7807S, Renesas R63419 - MNE001BS6-2, MNF601BS4-1, Sharp LQ120P1JX51 virtio: - add support for save/restore virtio_gpu_objects - abort vq wait on device removal amdgpu: - add color format DRM property - initial compute pipe reset support - add GFX 6-8 modifier support - initial DCN 6.0.0 support - dmemcg eviction support - improved boundary checking for bios parsing - RAS updates and rework - VCN secure submission fixes - 8K panel fix - Display KUNIT tests - parse panel type from DisplayID - Align IP discovery to pci device lifetime - SOC15 register macro cleanups - UVD memory placement fixes - GFX9 mode2 reset fixes - drop unnecessary BUG/BUG_ON - GFX8 soft reset rework - enable soft reset on GFX8 - PSP/SMU 15.0.9 update - VI ASPM fix - userq fixes - amdgpu_vm_get_task_info_pasid lifetime fix - DC CACP support - change system_unbound_wq with system_dfl_wq - Loosen VFCT bios parsing to deal with pci=realloc - SI/SMU7 AC/DC switch fix - VM fence handling fix - GEM close optimisation - Apple Studio Display fixes - DC FRL fixes amdkfd: - initial compute pipe reset support - allow applications to opt out of sigbus on fatal errors - improve CRIU boundary checks - MQD handling rework - move TBA/TMA from system to device memory - avoid topology-lock in kfd_mmap - SVM eviction fixes radeon: - fix unset CONFIG_ACPI build i915: - Novalake (NVL display version 35) timing generator enabling - NVL DC3CO enabling - enable UBHR link rates on thunderbolt tunnels - Reduce Xe3+ PM demand peak bandwidth - enable pipe DMC error interrupts for display 30+ - add kunit tests for DP link config selection - refactor and document DP link recovery - i915/xe driver display probe/remove/suspend/resume/shutdown cleanup and unification - i915/xe display runtime PM unified - Break i915 and xe panic dependency on struct intel_framebuffer - Streamline Pre/Post-CSC LUT loops - drop TGL DC3DO support - CDCLK santization - fix HDMI scrambling enable - fix phys bo pread/pwrite with offset - add missing nospec on parallel submit slot - fix some NULL derefs xe: - drop force_execlist module param - gate observation streams with perf_allow_cpu - skip FORCE_WC and vm_bound check for external dma-bufs - dmemcg eviction support - remove unused NVL-S GuC - TLB invalidation improvements - NVL-S updated PCI-IDs and w/a - madvise: optimise invalidation path - fix infinite gt-reset loop in timeout recovery - update TTM device benefical_order - wait on external BO kernel fences in exec ioctl - add/use more KLV helpers - sriov: disable display in admin only PF mode - add RAS GPU health indicator - optimise TTM populate for DONTNEED BO - drop force_probe for NVL-s - add debugfs for pcode info amdxdna: - disable device buffer export nova: - build nova-core/nova-drm from drivers/gpu - export nova-core rust symbols (workaround) - GSP boot process consolidation - Boot GSP with vGPU enabled - TLV firmware image format support - Hopper/Blackwell fixes and cleanups - I/O projection adoption tyr: - firmware loading and MCU boot - add generic slot manager + MMU - GPU VM support ARM64 LPAE page tables - add kernel buffer object for internal allocations - add parser for Mali CSF - add MCU booting nouveau: - race fixes - check instmem iomapping at first use - add dmemcg support - expose NVDEC channels - add scanline position/head state support for GSP qxl: - convert simple encoder to regular ethosu: - add perf counter support etnaviv: - force flush on power register ops msm: - support DSC configuration with slice_per_pkt > 1 mxsfb: - fix disable sequence panthor: - support sparse mappings rockchip: - switch away from simple helpers - support YUV background color - fix layer config timeout - add edp support for rk3576 - add batch command submission function rocket: - error handling and NULL ptr deref fixes sun4i: - switch away from simple helpers imagination: - mark BXM-4-64 MC1 as support host1x: - support tegra264 tegra: - add DSI for tegra 20/30 v3d: - reduce PM runtime autosuspend delay - scheduler fixes and refactoring - deprecate v3d 3.3 and 4.1 - validate CPU job query boundaries hibmc: - improve plane format handling - switch to gem shmem mediatek: - cec: correct compat for mt7623-8167? exynos: - remove simple dependency - add error handling to encoder paths - take i2c adapter module reference -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmqGlb0ACgkQDHTzWXnE hr7l9A//TnfntEghigEEFobfJX+p9FzaOTPPia8paooAj52OBK8Z86WpbYwEo4K9 X+vPXPYpqgKSiGkkC33swAlylWs2v3JoZQ+CESERBk176Ql3ZKhicBINH+k8jIcX uaFoDgpgMoV1JCcvF/m48de8YRcejSN43rIucS0aIH5/r/YEyRsE4d4dzCXw/qD8 92tjbmH20mChfeo8MUNatZx+t8ssSOrVdqouLmmFB8tYTcca6qwN60uA+9VESVtd nZLCEiZD0FUI73oT7fmK/zL2rTb2pZRPFNdz0mb6f7UUpu7f8RYnroHrNsGa/FHl K5RD1/gSVpfc6CbrhPnePaRKvIGeEC4ief8YRRyeoNVT3cmkf+citpOoKN2JajF1 bub/ni2z1FGA3y1ckJb4Z6HmGHt5gki/KoAKCmZkJ7bb7WJq/JHMWEFfq4LuNjTA FSSxPozM4pb69DL02wwRJIEe8cYcc/gVTgrSkzR/tsVUoE6XI4AwZJ/Exa43+jVe hjNkAOMrl/+ma/WGQ4BPUVeTRPZP6RlNM4cSWvG1YA2Pf6+O+XLjukac6t+Ozj0X Fz1ePqYxELKSOYkZKxdpxRDyzY6SxvtyDHfHblo4p+BUvaXKP4wfNRexXETD6Qow P7rqYN6riDMRPI9CoPd25V7cbfYbvoV0iJzv3EQwU3pvB9Vu1ho= =TGZ1 -----END PGP SIGNATURE----- Merge tag 'drm-next-2026-08-20' of https://gitlab.freedesktop.org/drm/kernel Pull drm updates from Dave Airlie: "Highlights: - dmemcg eviction support is good for low VRAM things like Steam Machine - AMD adds gfx6-8 modifier support for older GPUs that enables a bunch of wayland stuff - i915/xe has some new hw support but also a lot of display refactoring Everything: perf: - export perf_allow_ APIs for xe udmabuf: - remove default size limit of 64MB rust: - i/o rework (signed tag from driver-core tree) - add registration guard and registration data - fix unbounded lifetimes in ioctl handler args - fix a drm_dev_register race - gem_shmem: add DmaResvGuard helper - gpuvm: require send/sync for driver data - implement send/sync for GpuVaAlloc and GpuVmBo - add SmContext lifetime - rename dma_handle to dma_address - change pci_sriov_get_totalvfs return to unsigned int core: - create drm_of_get_panel_orientation - send per-connector hotplug events - add thunderbolt UBHR tunneling support connector: - add color format property dmem: - introduce a peak file - accept one region per limit - add dmemcg support for eviction gpusvm: - reorg code to give drivers more flexibility atomic: - add create_state callback and helper - add documentation on atomic commit lifetime buddy: - add per-order free - add used block scoreboard - fix UAF - test buffer clearance on resume - add phys_addr->block helper gem: - drop DRIVER_GEM_GPUVA flag ttm: - be more aggressive allocating below protection limit sched: - add test suite for concurrent job submissions hdmi: - hook the color format property in helpers mipi-dsi: - add MIPI_DSI_MODE_DSC_ALL_SLICES_IN_PKT bridge: - add atomic create callbacks - drop atomic reset - display-connector: don't autoenable HPD IRQ - trigger initial HPD for DP - ti-sn65dsi83: remove NO_HFP and NO_HBP mode flags - analogix_dp: switch to DP link training helpers dp: - add support for DSC max delta BPP edid: - parse panel type from DisplayID 2.x Display Parameters sysfb: - improve panel, stride, framebuffer size validation panel: - implement ref counting for struct drm_panel - himax-hx83121a: add backlight regulator support - novatek-nt36672a: Inline panel init sequences - visionox-vtdr6130: enable DSC - novatek-nt37801: Use mipi_dsi_*_multi() functions - samsung-s6d16d0: Fix prepare error handling - support Novatek NT36536 plus DT bindings - sofef00: fix backlight updates - osd101t2587: use mipi_dsi_*_multi interface - panel-edp: adjust timing for AUO displays - panel-lvds: support Opto Logic SCX1001511GGC49 - panel-simple: support Kyocera tcg070wvlq - panel-edp: quirks - AUO B116XAT04.3, CMN N116BCP-EA2, CSW MNB601LS1-8 - BOE NV116WH2-M30, BOE NT116WHM-N21, BOE NV116FH1-M31 - BOE NV116FH1-M30, NV140FHM-N5B, TM156VDXP25 - BOE NE160QDM-NY1, MB116AS01 - new: - Samsung ATNA40HQ08-0, Anbernic TD4310 - Chipone ICNA35XX, Ilitek ILI9488 - Ilitek ILI7807S, Renesas R63419 - MNE001BS6-2, MNF601BS4-1, Sharp LQ120P1JX51 virtio: - add support for save/restore virtio_gpu_objects - abort vq wait on device removal amdgpu: - add color format DRM property - initial compute pipe reset support - add GFX 6-8 modifier support - initial DCN 6.0.0 support - dmemcg eviction support - improved boundary checking for bios parsing - RAS updates and rework - VCN secure submission fixes - 8K panel fix - Display KUNIT tests - parse panel type from DisplayID - Align IP discovery to pci device lifetime - SOC15 register macro cleanups - UVD memory placement fixes - GFX9 mode2 reset fixes - drop unnecessary BUG/BUG_ON - GFX8 soft reset rework - enable soft reset on GFX8 - PSP/SMU 15.0.9 update - VI ASPM fix - userq fixes - amdgpu_vm_get_task_info_pasid lifetime fix - DC CACP support - change system_unbound_wq with system_dfl_wq - Loosen VFCT bios parsing to deal with pci=realloc - SI/SMU7 AC/DC switch fix - VM fence handling fix - GEM close optimisation - Apple Studio Display fixes - DC FRL fixes amdkfd: - initial compute pipe reset support - allow applications to opt out of sigbus on fatal errors - improve CRIU boundary checks - MQD handling rework - move TBA/TMA from system to device memory - avoid topology-lock in kfd_mmap - SVM eviction fixes radeon: - fix unset CONFIG_ACPI build i915: - Novalake (NVL display version 35) timing generator enabling - NVL DC3CO enabling - enable UBHR link rates on thunderbolt tunnels - Reduce Xe3+ PM demand peak bandwidth - enable pipe DMC error interrupts for display 30+ - add kunit tests for DP link config selection - refactor and document DP link recovery - i915/xe driver display probe/remove/suspend/resume/shutdown cleanup and unification - i915/xe display runtime PM unified - Break i915 and xe panic dependency on struct intel_framebuffer - Streamline Pre/Post-CSC LUT loops - drop TGL DC3DO support - CDCLK santization - fix HDMI scrambling enable - fix phys bo pread/pwrite with offset - add missing nospec on parallel submit slot - fix some NULL derefs xe: - drop force_execlist module param - gate observation streams with perf_allow_cpu - skip FORCE_WC and vm_bound check for external dma-bufs - dmemcg eviction support - remove unused NVL-S GuC - TLB invalidation improvements - NVL-S updated PCI-IDs and w/a - madvise: optimise invalidation path - fix infinite gt-reset loop in timeout recovery - update TTM device benefical_order - wait on external BO kernel fences in exec ioctl - add/use more KLV helpers - sriov: disable display in admin only PF mode - add RAS GPU health indicator - optimise TTM populate for DONTNEED BO - drop force_probe for NVL-s - add debugfs for pcode info amdxdna: - disable device buffer export nova: - build nova-core/nova-drm from drivers/gpu - export nova-core rust symbols (workaround) - GSP boot process consolidation - Boot GSP with vGPU enabled - TLV firmware image format support - Hopper/Blackwell fixes and cleanups - I/O projection adoption tyr: - firmware loading and MCU boot - add generic slot manager + MMU - GPU VM support ARM64 LPAE page tables - add kernel buffer object for internal allocations - add parser for Mali CSF - add MCU booting nouveau: - race fixes - check instmem iomapping at first use - add dmemcg support - expose NVDEC channels - add scanline position/head state support for GSP qxl: - convert simple encoder to regular ethosu: - add perf counter support etnaviv: - force flush on power register ops msm: - support DSC configuration with slice_per_pkt > 1 mxsfb: - fix disable sequence panthor: - support sparse mappings rockchip: - switch away from simple helpers - support YUV background color - fix layer config timeout - add edp support for rk3576 - add batch command submission function rocket: - error handling and NULL ptr deref fixes sun4i: - switch away from simple helpers imagination: - mark BXM-4-64 MC1 as support host1x: - support tegra264 tegra: - add DSI for tegra 20/30 v3d: - reduce PM runtime autosuspend delay - scheduler fixes and refactoring - deprecate v3d 3.3 and 4.1 - validate CPU job query boundaries hibmc: - improve plane format handling - switch to gem shmem mediatek: - cec: correct compat for mt7623-8167? exynos: - remove simple dependency - add error handling to encoder paths - take i2c adapter module reference" * tag 'drm-next-2026-08-20' of https://gitlab.freedesktop.org/drm/kernel: (2074 commits) drm/xe/mcr: Take vcs1/vecs1 into account for first media slice drm/xe: Fix a bug in pc_adjust_freq_bounds() drm/xe: Fix xe_device_probe() failure drm/xe/drm_ras: Move has_drm_ras check to drm_ras layer drm/xe/ras: Fix boot-time ras error processing drm/amd/display: make DC_RUN_WITH_PREEMPTION_ENABLED misuse a build error drm/amd/pm: silence uninitialized variable warnings drm/amdgpu: skip BOs being torn down during GTT recovery drm/amdgpu: Reject UVD message with invalid number of h265 refs drm/amdgpu: keep PRT mappings off the vm_bo state lists drm/amdgpu: fix nbif 6.3.1 l1 low power not functional drm/amd/display: fix BT.2020 YCbCr output CSC matrices for DCE drm/amd/display: fix BT.2020 YCbCr limited output CSC matrix drm/amdgpu: Implement insert_end for VCE 3 drm/amdgpu: Fix UVD min buffer sizes drm/amdgpu: Fix UVD decode image min size calculation drm/amdgpu: Fix UVD dpb min size calculation for H264 drm/amdgpu: Reject UVD message with dimensions above 4096 drm/amdgpu: check ASPM on the dGPU host link drm/radeon: fix autosuspend cleanup during teardown ... |
||
|
Stephen Boyd
|
dd8eb789f1
|
Merge branches 'clk-pile' and 'clk-microchip' into clk-next
* clk-pile: (111 commits) clk: microchip: mpfs: fix regmap_update_bits() mask/val order clk: visconti: Make sure clk_init_data is fully initialized clk: ti: Make sure clk_init_data is fully initialized MAINTAINERS: Add Brian Masney and Jerome Brunet as co-maintainers for clk subsystem Drop Michael Turquette's clk maintainer entry clk: ti: composite: resolve parent clocks by DT index, not by name clk: ti: mux: resolve parent clocks by DT index, not by name clk: devres: fix cleanup in devm_clk_get_optional_enabled_with_rate() dt-bindings: clock: ti,keystone-gate: Convert to DT schema dt-bindings: clock: ti: Convert APLL clock to DT schema clk: zynq: pll: Fix kernel-doc after determine_rate() conversion dt-bindings: clock: ti,clockdomain: Convert to DT schema dt-bindings: clock: Correct white-space style clk: tegra: set up proper EMC clock implementation for Tegra114 clk: clocking-wizard: remove 20kHz restriction clk: clocking-wizard: optimize clock search clk: clocking-wizard: fix clock difference detection clk: mediatek: mt8135: Fix inverted gate control for devapc_ck clk: clocking-wizard: Program PLL CP/RES and lock parameters on reconfig clk: tegra: support 48MHz clock for pll_p_out1 ... * clk-microchip: clk: at91: Read "reg" with helper |
||
|
Stephen Boyd
|
5d650f824d
|
Merge branches 'clk-imx', 'clk-rockchip', 'clk-samsung', 'clk-qcom' and 'clk-allwinner' into clk-next
* clk-imx: clk: imx95-blk-ctl: Fix REFCLK rise-fall mismatch on i.MX95 clk: imx95-blk-ctl: Add func_out_en clock for i.MX9x PCIe clk: imx: imx8qxp: add missing MODULE_DEVICE_TABLE() clk: imx: imx8qxp-lpcg: add missing MODULE_DEVICE_TABLE() clk: imx: Add audio PLL debugfs for K-divider control * clk-rockchip: clk: rockchip: rk3576: fix source muxes for SPI0..SPI4 clk: rockchip: Add clock controller for the RV1106 dt-bindings: clock: rockchip: Add RV1106 CRU support clk: rockchip: Fractional PLL coefficient on RK3588/RK3576 is two's complement clk: rockchip: Fix the fractional part denominator on RK3588/RK3576 PLLs clk: rockchip: rk3588: Allow VP2 the same sourcing options as other VPs clk: rockchip: rk3588: Don't change PLL rates when setting dclk_vop2_src * clk-samsung: clk: samsung: Don't include <linux/mod_devicetable.h> clk: samsung: pll: use kzalloc_flex clk: samsung: cpu: use kzalloc_flex clk: samsung: use kzalloc_flex clk: samsung: exynos990: Fix PERIS gate clock parents clk: samsung: exynos990: Add PERIS TMU_SUB_PCLK gate dt-bindings: clock: exynos990: Add CLK_GOUT_PERIS_TMU_SUB_PCLK * clk-qcom: (94 commits) clk: qcom: Add support for Qualcomm GPU Clock Controller on Shikra clk: qcom: Return expected ENOMEM error on dynamic allocation failure clk: qcom: apss-ipq-pll: Add IPQ5210 support dt-bindings: clock: qcom,a53pll: Add IPQ5210 compatible clk: qcom: Add support for videocc driver on Qualcomm Maili SoC dt-bindings: clock: qcom: Add Qualcomm Maili video clock controller dt-bindings: clock: qcom: Add Qualcomm Shikra GPU clock controller dt-bindings: clock: qcom: Add Qualcomm Shikra Display clock controller clk: qcom: gpucc-qcm2290: Park RCG's clk source at XO during disable clk: qcom: gpucc-qcm2290: Keep the critical clocks always-on from probe clk: qcom: gpucc-qcm2290: Move to the latest common qcom_cc_probe() model clk: qcom: gpucc-qcm2290: Drop pm_clk handling clk: qcom: qcm2290: Update DISPCC and GPUCC GDSC *wait_val values clk: qcom: qcm2290: Add RETAIN_FF_ENABLE flag for DISPCC and GPUCC GDSCs clk: qcom: qcm2290: Set POLL_CFG_GDSCR flag for DISPCC and GPUCC GDSCs clk: qcom: dispcc-qcm2290: Enable runtime PM support clk: qcom: dispcc-qcm2290: Move to the latest common qcom_cc_probe() model clk: qcom: gcc-qcm2290: Keep the critical clocks always-on from probe dt-bindings: clock: qcom,qcm2290-dispcc: Add missing power-domains property clk: qcom: Add Audio Core clock controller support on Qualcomm Shikra SoC ... * clk-allwinner: clk: sunxi-ng: sun6i-rtc: add a733 support clk: sunxi-ng: sun6i-rtc: split main oscillator div and gate clk: sunxi-ng: div: add read-only operation support clk: sunxi-ng: mux: fix determine helper rate propagation clk: sunxi-ng: mux: remove unneeded export clk: sunxi-ng: sun6i-rtc: Add feature bit for IOSC calibration clk: sunxi-ng: sun6i-rtc: clean up DT usage clk: sunxi-ng: fix ccu probe clock unregister on error dt-bindings: rtc: sun6i: add sun60i-a733 support dt-bindings: rtc: sun6i: no clock-output-names on h616/r329 |
||
|
Stephen Boyd
|
a1476addb4
|
Merge branches 'clk-renesas', 'clk-thead', 'clk-mobileye', 'clk-amlogic' and 'clk-spacemit' into clk-next
* clk-renesas: clk: renesas: Add R-Car X5H CPG driver dt-bindings: clock: Document Renesas R-Car X5H Clock Pulse Generator clk: r9a08g045: Add clocks and resets for CAN-FD dt-bindings: clock: renesas,versaclock7: Update maintainer clk: renesas: r9a09g047: Add LVDS clocks and resets clk: renesas: r9a09g077: Add LCDC and PLL3 clock support for RZ/T2H display pipeline clk: renesas: rzv2h-cpg: Extract PLL calculation helpers into shared library clk: renesas: rzv2h-cpg: Use per-SoC PLL reference frequency for calculations clk: renesas: r9a08g046: Add USB2.0 clock and reset entries clk: renesas: r9a09g077: Add RTC clocks clk: renesas: cpg-mssr: Implement dedicated MSTP delay logic for RZ/T2H LCDC and RTC clk: renesas: r9a08g046: Add clock and reset entries for GE3D clk: renesas: r9a08g046: Add clock and reset entries for SDHI clk: renesas: r9a09g047: Add audio clock and reset support dt-bindings: clock: renesas: Add audio clock inputs for RZ/V2H family dt-bindings: clock: renesas,r9a09g077/87: Add PCLKRTC clock ID dt-bindings: clock: renesas,r9a09g077/87: Add LCDC_CLKD clock ID * clk-thead: clk: thead: allow COMPILE_TEST builds * clk-mobileye: clk: eyeq: Add EyeQ7H compatibles clk: eyeq: Drop PLL, dividers, and fixed factors structs clk: eyeq: Convert clocks declaration to eqc_clock clk: eyeq: Introduce a generic clock type clk: eyeq: Prefix the PLL registers with the PLL type clk: fixed-factor: Export __clk_hw_register_fixed_factor() clk: fixed-factor: Rework initialization with parent clocks reset: eyeq: Add EyeQ7H compatibles dt-bindings: soc: mobileye: Add EyeQ7H OLB * clk-amlogic: clk: amlogic: Add A9 peripherals clock controller driver dt-bindings: clock: Add Amlogic A9 peripherals clock controller clk: amlogic: Add A9 AO clock controller driver dt-bindings: clock: Add Amlogic A9 AO clock controller clk: meson: align gxbb_32k_clk_sel number of parents with actual count * clk-spacemit: clk: spacemit: k3: fix missing /2 factor in i2s sysclk dividers clk: spacemit: k3: fix i2s clock topology dt-bindings: soc: spacemit: k3: add i2s_sysclk, i2s_bclk_factor and i2s1_sysclk_src IDs clk: spacemit: k3: Add UFS refclk clock dt-bindings: soc: spacemit: k3: Add clock ID for UFS refclk clk: spacemit: k3: fix parent clock of UFS aclk |
||
|
Linus Torvalds
|
073e62fd33 |
RISC-V updates for v7.3
- Add initial definitions and discovery for the Smcsrind, Sscsrind, Smcntrpmf, Ssccfg, Smcdeleg, Zicclsm, Ziccamoa, Ziccif, Ziccrse, Za64rs, and Ssqosid RISC-V ISA extensions - Improve the RISC-V update_mmu_cache_range() implementation by using flush-by-ASID, enabling performance improvements on microarchitectures that support related optimizations; and by taking advantage of the Svinval RISC-V ISA extension on microarchitectures that support it - Shrink CFI shadow stack allocation further (to 512MB) to save virtual address space (and physical memory on systems with strict overcommit policies) - Add initial CPU context switch support for QoS tagging (Ssqosid) - Change our vector misaligned access speed test code to be synchronous, avoiding a bunch of bugs related to unnecessary asynchronicity - Enable ARCH_HAS_ACPI_TABLE_UPGRADE for RISC-V to help with ACPI table debugging (similar to ARM64 and x86) - Extract vDSO section offsets at build time, rather than run time, to avoid the boot time overhead - Use assembler directives to control the use of instructions from the RISC-V ISA extensions Zacas and Zabha, rather than compiler -march flags that could affect the whole kernel (similar to ARM64) - Add a kselftest for kprobes support for the c.jal instruction on RISC-V - When UEFI runtime services are available, use them to restart and power off - Fix ARCH_HAS_ACPI_TABLE_UPGRADE for RISC-V by adding a missing include file to the ACPI code - Move contiguous DMA memory reservation later in the boot, to ensure that the correct global and per-node pools are allocated when CONFIG_CMA_SIZE_PERNUMA is enabled - Disallow probes on breakpoint handlers to avoid recursing indefinitely into do_trap_break() - Patch the compat vDSO during runtime alternatives processing, not only the standard vDSO - Remove some leftover XIP support elements missed by commit |
||
|
Linus Torvalds
|
91ec203513 |
Networking changes for 7.3.
Core & protocols
----------------
- A few steps lowering rtnl_lock dependence:
- per-netns netdev unregistration for select SW drivers
(e.g. veth, ipvlan, tunnels)
- rtnl_lock-less FIB rule changes (RTM_NEWRULE and RTM_DELRULE)
- prepare software drivers and TC qdiscs for rtnl_lock-less GET
- Support BIG TCP (>64kB TSO) in UDP tunnels (vxlan, geneve).
- Support buffers larger than PAGE_SIZE in devmem zero-copy API.
- Improve MPTCP handling of extreme memory pressure handling,
when out-of-order queue had to be pruned.
- Report the per-group user count via RTM_GETMULTICAST.
- Expose the route deletion reason in RTM_DELROUTE.
- Add a SO_RIGHTS_NOTRUNC option to UNIX sockets to enable more useful
handling of LSM denials when receiving SCM_RIGHTS messages: instead
of truncating the message at the first blocked fd, keep every fd slot
and store the LSM errno in the blocked slot.
- IPv6 Segment Routing - support looking up the post-encap SID
(address) in a different/specified routing table.
- Support PRP RedBox (interlink) creation.
- Support per-nexthop UDP dst port in VXLAN.
- Continue converting getsockopt callbacks in a number of protocols
to iov_iter.
Ethernet
--------
- Marge initial CXL support for AMD/Solarflare NICs (shared branch
with the CXL tree).
- New drivers:
- ADIN1140 10BASE-T1S MACPHY
- Initial skeleton of Intel iXD and ZTE Dinghai drivers.
- High-speed NICs:
- AMD/Pensando:
- support firmware flashing
- Cisco (enic):
- SR-IOV V2 admin channel and MBOX protocol
- Huawei (hns3):
- support for ethtool pfc_prevention_tout
- nVidia/Mellanox:
- support sharing bandwidth control across interfaces of
the same device
- Marvell (octeontx2-pf):
- link RQ page pools to netdev for Netlink stats
- Google vNIC:
- XDP metadata support for DQ RDA
- Microsoft vNIC:
- support forcing full-page RX buffers
- Other NICs:
- Synopsys IP:
- eic7700: support for eth1
- Microchip (lan743x):
- support for RMII interface
- Wangxun:
- support for ethtool -G and -C for VFs
- add Tx timeout and PCIe error handling
- Intel (igb/igc):
- RSS key get/set support
- support for forcing link speed without auto-negotiation
- Switches:
- NXP (dpaa2):
- support bonding/LAG offload
- Mediatek:
- mt7530: EN7528 support
- initial support for MT7628
- Micrel (ksz8/9):
- refactoring work to move towards library model
- PTP support for KSZ8463
- nVidia/Mellanox:
- support rtnl-lock-less ethtool callbacks
- Realtek:
- rtl8366rb: use generic RTL83xx code
- support SGMII and HSGMII for RTL8367S
- PHYs:
- Airoha:
- EcoNet EN7528 PHY support
- DAPU Telecom
- DAPU Telecom DAP8211R(I) Gigabit PHY support
- Realtek:
- support RTL8261C_CG
- support RTL8261D
Wireless
--------
- nl80211: per-link statistics support for multi-link operation
- mac80211: AQL/airtime-fairness support for multicast
- Merge Peripheral Authentication Service (PAS) / TEE support
for ath12k (shared branch with the firmware/qcom tree).
- New drivers:
- mm81x for Morse Micro Long-Range S1G devices
- nxpwifi for NXP devices (mostly forked off from mwifiex)
- Driver changes:
- Broadcom (brcmfmac):
- DPP support, some Cypress part update
- MediaTek (mt76):
- mt7928 support
- mt7925 NAN support
- mt7996 AP powersave improvements
- Qualcomm (ath12k):
- much kernel infrastructure integration work
- AHB platform MultiPD support
- Realtek (rt89):
- LED support
- RTL8922DE support
- dual-BT coex for RTL8922D
- Intel:
- new FW version support
Bluetooth
---------
- HCI: add support for Shorter Connection Interval (SCI) feature.
- af_bluetooth: add minimal context analysis annotations.
- Driver changes:
- Intel:
- add Bluetooth SAR revision 2 support
- add vendor_reset PCI sysfs for PLDR
- Mediatek:
- add USB IDs for MT7902 and MT7922 devices
- Realtek:
- add USB IDs for 8761CU and 8852BE devices
- NXP:
- add M.2 Bluetooth device support using pwrseq
Misc
----
- DPLL support for manual/numerical oscillator control (NCO)
(implement in zl3073x).
- MCTP support for MCTP over USB v1.1 (DMTF DSP0283).
- Power-over-Ethernet: support Realtek PSE controllers.
- Remove the IBM EHEA driver.
- Remove tulip/xircom_cb driver.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=zDto
-----END PGP SIGNATURE-----
Merge tag 'net-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"One of the 'small improvements all over the place' releases for us.
It's hard to draw any direct comparisons because summer vacations
disrupted our patch processing (and presumably - generation) quite a
bit.
Quick and dirty count suggests we (Paolo and I) merged a very similar
number of net (632) and net-next (648) patches. This is not telling
the full story either because 1/3 to 1/2 of the net-next patches also
*seem* like AI-driven low priority fixes, cleanups and clarifications.
We are completely overwhelmed, of course. The glimmer of hope is that
we secured sufficient LLM budget and access (thank you Meta!) to run
reviews with multiple frontier models on each patch. This eliminates
some hallucinations. That said, in terms of review, the LLMs can only
do so much.
The sad truth is that our APIs (especially for rare events like PCIe
errors, timeouts etc) have always been racy, and now LLMs don't let us
ignore that. I expect our direction for the next release will be to
tweak the reviews a little bit more, but start shifting focus to
letting the LLMs take care of the busy work - managing patchwork,
automating common process complaints, editing commit messages, and
maybe applying patches which already got "reviewed-by" tags from
people we trust...
Core & protocols:
- A few steps lowering rtnl_lock dependence:
- per-netns netdev unregistration for select SW drivers (e.g.
veth, ipvlan, tunnels)
- rtnl_lock-less FIB rule changes (RTM_NEWRULE and RTM_DELRULE)
- prepare software drivers and TC qdiscs for rtnl_lock-less GET
- Support BIG TCP (>64kB TSO) in UDP tunnels (vxlan, geneve)
- Support buffers larger than PAGE_SIZE in devmem zero-copy API
- Improve MPTCP handling of extreme memory pressure handling, when
out-of-order queue had to be pruned
- Report the per-group user count via RTM_GETMULTICAST
- Expose the route deletion reason in RTM_DELROUTE
- Add a SO_RIGHTS_NOTRUNC option to UNIX sockets to enable more
useful handling of LSM denials when receiving SCM_RIGHTS messages:
instead of truncating the message at the first blocked fd, keep
every fd slot and store the LSM errno in the blocked slot
- IPv6 Segment Routing - support looking up the post-encap SID
(address) in a different/specified routing table
- Support PRP RedBox (interlink) creation
- Support per-nexthop UDP dst port in VXLAN
- Continue converting getsockopt callbacks in a number of protocols
to iov_iter
Ethernet:
- Merge initial CXL support for AMD/Solarflare NICs (shared branch
with the CXL tree)
- New drivers:
- ADIN1140 10BASE-T1S MACPHY
- Initial skeleton of Intel iXD and ZTE Dinghai drivers
- High-speed NICs:
- AMD/Pensando:
- support firmware flashing
- Cisco (enic):
- SR-IOV V2 admin channel and MBOX protocol
- Huawei (hns3):
- support for ethtool pfc_prevention_tout
- nVidia/Mellanox:
- support sharing bandwidth control across interfaces
of the same device
- Marvell (octeontx2-pf):
- link RQ page pools to netdev for Netlink stats
- Google vNIC:
- XDP metadata support for DQ RDA
- Microsoft vNIC:
- support forcing full-page RX buffers
- Other NICs:
- Synopsys IP:
- eic7700: support for eth1
- Microchip (lan743x):
- support for RMII interface
- Wangxun:
- support for ethtool -G and -C for VFs
- add Tx timeout and PCIe error handling
- Intel (igb/igc):
- RSS key get/set support
- support for forcing link speed without auto-negotiation
- Switches:
- NXP (dpaa2):
- support bonding/LAG offload
- Mediatek:
- mt7530: EN7528 support
- initial support for MT7628
- Micrel (ksz8/9):
- refactoring work to move towards library model
- PTP support for KSZ8463
- nVidia/Mellanox:
- support rtnl-lock-less ethtool callbacks
- Realtek:
- rtl8366rb: use generic RTL83xx code
- support SGMII and HSGMII for RTL8367S
- PHYs:
- Airoha:
- EcoNet EN7528 PHY support
- DAPU Telecom
- DAPU Telecom DAP8211R(I) Gigabit PHY support
- Realtek:
- support RTL8261C_CG
- support RTL8261D
Wireless:
- nl80211: per-link statistics support for multi-link operation
- mac80211: AQL/airtime-fairness support for multicast
- Merge Peripheral Authentication Service (PAS) / TEE support for
ath12k (shared branch with the firmware/qcom tree)
- New drivers:
- mm81x for Morse Micro Long-Range S1G devices
- nxpwifi for NXP devices (mostly forked off from mwifiex)
- Driver changes:
- Broadcom (brcmfmac):
- DPP support, some Cypress part update
- MediaTek (mt76):
- mt7928 support
- mt7925 NAN support
- mt7996 AP powersave improvements
- Qualcomm (ath12k):
- much kernel infrastructure integration work
- AHB platform MultiPD support
- Realtek (rt89):
- LED support
- RTL8922DE support
- dual-BT coex for RTL8922D
- Intel:
- new FW version support
Bluetooth:
- HCI: add support for Shorter Connection Interval (SCI) feature
- af_bluetooth: add minimal context analysis annotations
- Driver changes:
- Intel:
- add Bluetooth SAR revision 2 support
- add vendor_reset PCI sysfs for PLDR
- Mediatek:
- add USB IDs for MT7902 and MT7922 devices
- Realtek:
- add USB IDs for 8761CU and 8852BE devices
- NXP:
- add M.2 Bluetooth device support using pwrseq
Misc:
- DPLL support for manual/numerical oscillator control (NCO)
(implement in zl3073x)
- MCTP support for MCTP over USB v1.1 (DMTF DSP0283)
- Power-over-Ethernet: support Realtek PSE controllers
- Remove the IBM EHEA driver
- Remove tulip/xircom_cb driver"
* tag 'net-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1433 commits)
net/mlx5e: do not HW-GRO coalesce small frames
net: openvswitch: fix nf_connlabels leak in ovs_ct_init
net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs()
net: openvswitch: fix flow mask use-after-free on flow deletion
sctp: stop processing a packet once its association is deleted
dpll: zl3073x: add PTP clock support
dpll: zl3073x: add channel ToD, phase step and TIE operations
dpll: zl3073x: scale poll interval proportionally to timeout
ptp: vmclock: prevent read-only mappings from becoming writable
ipv4: reject undersized MTUs in ip_do_fragment()
bonding: initialize err for empty target lists
net: dsa: initial support for MT7628 embedded switch
net: dsa: initial MT7628 tagging driver
net: phy: mediatek: add phy driver for MT7628 built-in Fast Ethernet PHYs
dt-bindings: net: dsa: add MT7628 ESW
net: pse-pd: realtek-pse-mcu: add UART transport
net: pse-pd: realtek-pse-mcu: add I2C transport
net: pse-pd: add Realtek PSE MCU core
dt-bindings: net: pse-pd: add bindings for Realtek PSE MCU
vsock: use sock_error() to consume sk_err after a failed connect
...
|
||
|
Dave Airlie
|
c44e278ce0 |
Linux 7.2
-----BEGIN PGP SIGNATURE----- iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmqCLGoeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGJzYH/0SFjcgnk1Z3Km+3 2kEeGAMETajW41W7+5QQkuHk83UXDxigDRoD857/d8utK90GrZAoTMS9/6zF3tra ht4G1yc2x7/xgVLkWii54d/sp1LEWTRDntN95fzYZwbeAXwd0AcYBlKXZYHKl4t/ 4yZCgYPmYTkewaYdbyWNPiZvCwhBUl5k1E9i/drh5IJXdgXRcqoO86FY9JX+Ks9x r0g+d6RIiSbDfwzgRpkBn0TRnqzh2OeBfgyrsgGZO2axwlKcA7SP0vwwT6c6nOUI s8F2xXrqrUI75JbSI4YbdwOSvktwbtkz83idlRAYBOdxof3LJ6i2YaxrT8iG+KUH l7+e18M= =eQMh -----END PGP SIGNATURE----- BackMerge tag 'v7.2' into drm-next Linux 7.2 There was a lot of conflicts this round between fixes and next, and I'd like to get the merge resolutions that we have in drm-tip. Signed-off-by: Dave Airlie <airlied@redhat.com> |
||
|
Linus Torvalds
|
a4ff2be345 |
This update includes the following changes:
API: - Add af_alg_restrict sysctl and white list. - Fix potential suspend/resume races in hwrng. Algorithms: - Optimize vli additive operations using compiler builtins in ecc. Drivers: - Remove unsafe/deprecated algorithms from qce. - Mark qce as BROKEN. - Add runtime PM and interconnect bandwidth scaling support to qce. - Remove crypto_rng from qcom, sun8i and caam. - Fix SG list issues in iaa. - Fix SEV init path bugs in ccp. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmqEC3gACgkQxycdCkmx i6fOCw/9EzjhD0xotKv0Kylk/ukG+UYhh2j1zwFbMUuRl0GQCklSfM19h0DQ53vS FgJqf+69Q9sfn2HxihxQJGkW+NmiqwlHG9veu2PRBXRnMDjFQ8LDHAVEShvL4Jzv PW9daF3KsOjlcFuOVHum9SdQ2tdsoClEtBv8W9ndOxxGxGj3827etOWSTTp4DprP y2bpcE3R+CjmOgATmAQfOiKdLtghv8SspSRUmwVmj8lVijkjTiH9UELwQ4Tp407q vZU027gBHaWKb4VBLPX3NUg0UaJFsieKGrty2EZqX0nXF4f2jaPYB1iP9Y+92qcP WfvidNpVeLpRlJpf5QH1ZqiH7qf9I1YdOXcNe8IL+3b+9SYiyqDY3vuCeBE05dOJ Oty9m8pIV7IwZmhUIhZ0PdIl58urzxYPvCdD0IdAsA0sdNQEBcbTnuVuQjxt4AG0 GYPqiZdtRs5r3MkdRpymV49TBJ+vMY3Wo1lnCcnpCgxugTAx7tkFtMNBJSHF7DbC N1vwb2EYaTyzmH5Vr3dHLWeONskyIRa0WNhnszmIBie3M0AYF2sOkNw3iXVPQxXv a5XbXh/kAx0nc417dp1B8lZclHH2bWvEKHYalpT33GX4qsGuI4bH4uKaOrL0pXp1 WyNzGiCiWJBp2o9wNj/TxKCp7oGeD4ZRv0HeRrEHezSInoTrt9w= =f9oK -----END PGP SIGNATURE----- Merge tag 'v7.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto update from Herbert Xu: "API: - Add af_alg_restrict sysctl and white list - Fix potential suspend/resume races in hwrng Algorithms: - Optimize vli additive operations using compiler builtins in ecc Drivers: - Remove unsafe/deprecated algorithms from qce - Mark qce as BROKEN - Add runtime PM and interconnect bandwidth scaling support to qce - Remove crypto_rng from qcom, sun8i and caam - Fix SG list issues in iaa - Fix SEV init path bugs in ccp" * tag 'v7.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (122 commits) crypto: lskcipher - propagate errors from unaligned crypt crypto: keembay - use crypto_memneq() to compare CCM AEAD tags crypto: keembay - use crypto_memneq() to compare GCM AEAD tags crypto: sa2ul - use crypto_memneq() to compare AEAD tag hwrng: drivers - use named initializers for acpi_device_id crypto: qce - fix CCM AAD buffer underallocation crypto: iaa - unmap dst before software fallback on decompress crypto: iaa - use bounce buffer for multi-sg decompress input crypto: iaa - avoid counting fallback decompression bytes crypto: iaa - fall back to software for multi-entry scatterlists hwrng: core - Stop/start hwrng_fillfn() kthread before/after suspend-resume crypto: hisilicon/sec2 - fix CCM algorithm long packet failure crypto: eip93 - use struct_size() and flexible array for ring allocation crypto: krb5 - use kfree_sensitive() for derived key buffers crypto: af_alg - Stop after finding name in allowlist crypto: af_alg - Replace 'bool privileged' with flags crypto: af_alg - Make cbc(paes) privileged-only hwrng: imx-rngc - Disable clock on registration failure crypto: qat - remove dead ADF_HEX code crypto: qce - simplify qce_handle_request ... |
||
|
Eduard Bostina
|
4d31434fea |
dt-bindings: rtc: Convert TI Palmas RTC to DT schema
Convert the Texas Instruments Palmas RTC controller bindings to DT schema. As part of the conversion, declare 'wakeup-source: true'. This documents the Palmas PMIC's capability to wake the system. Signed-off-by: Eduard Bostina <egbostina@gmail.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20260719141008.3562347-2-egbostina@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> |
||
|
Teja Sai Charan Bellamkonda
|
745ca1b959 |
dt-bindings: rtc: Convert rtc-cmos binding to YAML
Convert the rtc-cmos devicetree bindings to dt schema. The original text binding documents only the motorola,mc146818 compatible. Existing in-tree Devicetree sources also use the intel,ce4100-rtc compatible together with the motorola,mc146818 fallback, but this was not documented. Document the Intel variant in the schema so that these existing configurations are accepted during schema validation. Signed-off-by: Teja Sai Charan Bellamkonda <tejaasaye@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Link: https://patch.msgid.link/20260709221944.159244-1-tejaasaye@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> |
||
|
Udaya Kiran Challa
|
1190db8edc |
dt-bindings: rtc: microchip,pic32mzda-rtc: Convert to DT schema
Convert Microchip PIC32 Real Time Clock and Calendar devicetree binding from legacy text format to DT schema. Signed-off-by: Udaya Kiran Challa <challauday369@gmail.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20260703110442.205026-1-challauday369@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> |
||
|
Bhargav Joshi
|
315d11a891 |
dt-bindings: rtc: ti,omap-rtc: Convert to DT schema
Convert the Texas Instruments OMAP Real Time Clock (RTC) binding from the legacy text format to the DT schema. Mark 'ti,hwmods' as deprecated as it is no longer used, it is kept to support legacy boards. Signed-off-by: Bhargav Joshi <j.bhargav.u@gmail.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20260804-ti-omap-rtc-v3-4-ba3bbd8af570@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> |
||
|
Linus Torvalds
|
4994ef0fe0 |
IOMMU updates for Linux v7.3:
- ARM SMMUv2:
- Device-tree binding updates for Qualcomm Eliza, Maili, Shikra and
IPQ9650 SoCs.
- Add support for Qualcomm SM8450.
- Numerous fixes for lifetime and ordering issues found by Sashiko in
the Qualcomm driver.
- ARM SMMUv3:
- Fix interrupt type in device-tree binding example for NVIDIA CMDQV.
- Numerous fixes for issues identified by Sashiko in the NVIDIA CMDQV
driver.
- Work around TLB erratum T264-SMMU-3 on Tegra264 by repeating the
invalidation sequence.
- Add support for HAFT (hardware access flag in table entries) when
using SVA.
- Probe for 52-bit addressing with a page size smaller than 64k ('DS')
but don't do anything with it for now.
- Minor driver improvements (remove sort_nonatomic(), use
readl_relaxed_poll_timeout_atomic(), fix IOPF teardown ordering).
- Intel VT-d:
- Consolidation of complex enablement logic into a clean, priority-based
state machine.
- Support for the DMA_REMAP_OPT_OUT flag from the VT-d v5.2
specification.
- An update to cache_tag_flush_devtlb_psi() to use full-range constants
instead of modifying shared variables for CACHE_TAG_NESTING_DEVTLB.
- A fix for the UCTP context-table slot when copying root entries.
- Fixes for several pre-existing issues reported by Sashiko.
- General code cleanup and refinement.
- AMD IOMMU:
- Add SNP page-mode-0 support, enabling passthrough, v2 DMA page
tables and host SVA on supporting systems.
- Fix invalid PPR handling, COMPLETE_PPR responses and guest-mode
reporting.
- Improve Southbridge IOAPIC validation and remove the dependency on
hard-coded device IDs.
- Fix PCI-device lifetime, debugfs and diagnostic issues.
- IOMMU core and IOMMUFD:
- Restore serialization of the shared MSI-page list.
- Fix SVA-handle publication and several IOMMUFD reference and error
path leaks.
- Return the expected zero result for invalid generic page-table
translations.
- Allocate per-CPU IOVA magazines lazily to reduce memory use on
large systems.
- PCI ATS:
- Make VF support checks account for the associated PF and validate
that VF and PF Smallest Translation Unit settings agree.
- Platform drivers:
- Fix Qualcomm runtime-PM, probe unwind, fault reporting and page
table initialization races.
- Rework Rockchip state handling and fix clock, probe and stale-fault
handling.
- Fix smaller issues in the MSM and MediaTek drivers.
- Device-tree bindings:
- Add new Qualcomm SMMU compatibles, convert the OMAP IOMMU binding
to YAML, and fix the Tegra264 CMDQV interrupt example.
- Various smaller cleanups, documentation fixes and a Rust IOMMU
safety/readability improvement.
-----BEGIN PGP SIGNATURE-----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=V5FT
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"ARM SMMUv2:
- Device-tree binding updates for Qualcomm Eliza, Maili, Shikra and
IPQ9650 SoCs
- Add support for Qualcomm SM8450
- Numerous fixes for lifetime and ordering issues found by Sashiko in
the Qualcomm driver
ARM SMMUv3:
- Fix interrupt type in device-tree binding example for NVIDIA CMDQV
- Numerous fixes for issues identified by Sashiko in the NVIDIA CMDQV
driver
- Work around TLB erratum T264-SMMU-3 on Tegra264 by repeating the
invalidation sequence
- Add support for HAFT (hardware access flag in table entries) when
using SVA
- Probe for 52-bit addressing with a page size smaller than 64k
('DS') but don't do anything with it for now
- Minor driver improvements (remove sort_nonatomic(), use
readl_relaxed_poll_timeout_atomic(), fix IOPF teardown ordering)
Intel VT-d:
- Consolidation of complex enablement logic into a clean,
priority-based state machine
- Support for the DMA_REMAP_OPT_OUT flag from the VT-d v5.2
specification
- An update to cache_tag_flush_devtlb_psi() to use full-range
constants instead of modifying shared variables for
CACHE_TAG_NESTING_DEVTLB
- A fix for the UCTP context-table slot when copying root entries
- Fixes for several pre-existing issues reported by Sashiko
- General code cleanup and refinement
AMD IOMMU:
- Add SNP page-mode-0 support, enabling passthrough, v2 DMA page
tables and host SVA on supporting systems
- Fix invalid PPR handling, COMPLETE_PPR responses and guest-mode
reporting
- Improve Southbridge IOAPIC validation and remove the dependency on
hard-coded device IDs
- Fix PCI-device lifetime, debugfs and diagnostic issues
IOMMU core and IOMMUFD:
- Restore serialization of the shared MSI-page list
- Fix SVA-handle publication and several IOMMUFD reference and error
path leaks
- Return the expected zero result for invalid generic page-table
translations
- Allocate per-CPU IOVA magazines lazily to reduce memory use on
large systems
PCI ATS:
- Make VF support checks account for the associated PF and validate
that VF and PF Smallest Translation Unit settings agree
Platform drivers:
- Fix Qualcomm runtime-PM, probe unwind, fault reporting and page
table initialization races
- Rework Rockchip state handling and fix clock, probe and stale-fault
handling
- Fix smaller issues in the MSM and MediaTek drivers
Device-tree bindings:
- Add new Qualcomm SMMU compatibles, convert the OMAP IOMMU binding
to YAML, and fix the Tegra264 CMDQV interrupt example
Various smaller cleanups, documentation fixes and a Rust IOMMU
safety/readability improvement"
* tag 'iommu-updates-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (93 commits)
iommu/amd: Add SNP page mode 0 support
iommu/amd: Fix GN bit setting in COMPLETE_PPR_REQUEST command
iommu/amd: Rate limit INVALID_PPR_REQUEST error logging
iommu/amd: Fix missing CMD_COMPLETE_PPR response for invalid PPR requests
iommu/amd: Introduce PPR_TAG_LAST_PAGE() macro
iommu/amd: Fix incorrect device ID in invalid PASID error message
iommu/vt-d: Flush context cache with correct SID when tearing down aliases
iommu/vt-d: Tear down scalable-mode context on probe failure
iommu/vt-d: Fix iopf_refcount leak on RID domain replacement
iommu/vt-d: Clear Present bit before tearing down copied context entry
iommu/vt-d: Fix copied_tables bitmap leak on error in copy_translation_tables
iommu/vt-d: Cache max domain ID to avoid redundant calculation
iommu/vt-d: Support the new DMA_REMAP_OPT_OUT flag bit
iommu/vt-d: Remove dmar_disabled
iommu/vt-d: Remove the 'force_on' variable
iommu/vt-d: Call dmar_can_force_on() for tboot opt-in
iommu/vt-d: Use dmar_can_force_on() for platform opt-in
iommu/vt-d: Consolidate dmar policy management and force_on logic
iommu/vt-d: Remove dead code when CONFIG_INTEL_IOMMU is not set
iommu/vt-d: Force requesting ACS when tboot is enabled
...
|
||
|
Linus Torvalds
|
c6cf4441a3 |
Devicetree updates for v7.3:
- Add a DT maintainer profile document - Various dt-check-style improvements - Add a devres managed reserved memory region init function - Print node name on any skipped reserved memory regions - Correctly handle optional argument in of_parse_phandle_with_args_map() - Convert ti,keystone-reset, ti,da850-vpif, TI L4 interconnect, TI SmartReflex, microchip,pic32mzda-dmt, microchip,pic32mzda-wdt, TI DA8XX MSTPRI bus, and Xen VM bindings to DT schema format - Add bindings for StarFive JHB100 plic, Allwinner A733 NMI controller, MediaTek MT8173 GPU, QCom Shikra, Eliza, and Maili cpu-bwmon, and QCom Shikra SCM firmware - A couple of syntax fixes found using PoC Rust implementation of dtschema tools - Clean-ups for typos, brackets, incorrect "::" usages, and white-space style -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmqA0pYACgkQ+vtdtY28 YcOGLRAAsSVfV1r7n9SmPQ246dRQeVkNo3ZAEFuqqeBzJjMNyVyYn4iCcwkYDhaY rRlRpanmhbooUJfRRpxpgIv8XwWOiha8eq9mojnbGfgq00/8BEnD16A7bwNDaxsf /IUVKYQs8x7AK3nGLXvJ2BXQZzAZCnwylnsW6Pbkhns3xuc3lED4BGRRRsPH4T77 lMh2cA8JjeaY9sC/6aosTg1342nj+QpC2qJOfd2ONsWCKKD3zYAWWVFpj17J4o3d XDpLIjR1X6aOKoWOMDqmjnC/vwQ3Zzmz84zfArb4bl0O9A/ENQ1XYuNJ5tohxWd0 LfWMOD6dUIaquuoRUSvWrnafgSqumjTYzLZeK5KLDT2xqAnBO3sfizjFq9c4AHO8 TkU74DZiIGH2VCGCQtm7v5gZGbGKJ0g2TndCbQhEa/OyvaNfZpItGJWCHY3kg5xd Wn60sk1L/HnwItwGH47xxeksc1TiuhqH3zfr4ztj9fenUnuLtmkjdhu8wZGjpYFq 2Jf2KIUJov4WLN6cyP51vf5L1+OoaSfZ/6nuaO+9bAa/j+GQiZpRQI95yEOcXBd/ QbAL1tA8w9IRpN/bZ5l+Hw9ZO9Q1hpLTV92xqOPvVDXvDR7xi/7R4dvRm86m9IcT FTtNLLkz76V0DTqgHWfNtwxulYa69NrZjtD+VooVw1BWMo8ExmQ= =54fa -----END PGP SIGNATURE----- Merge tag 'devicetree-for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Add a DT maintainer profile document - Various dt-check-style improvements - Add a devres managed reserved memory region init function - Print node name on any skipped reserved memory regions - Correctly handle optional argument in of_parse_phandle_with_args_map() - Convert ti,keystone-reset, ti,da850-vpif, TI L4 interconnect, TI SmartReflex, microchip,pic32mzda-dmt, microchip,pic32mzda-wdt, TI DA8XX MSTPRI bus, and Xen VM bindings to DT schema format - Add bindings for StarFive JHB100 plic, Allwinner A733 NMI controller, MediaTek MT8173 GPU, QCom Shikra, Eliza, and Maili cpu-bwmon, and QCom Shikra SCM firmware - A couple of syntax fixes found using PoC Rust implementation of dtschema tools - Clean-ups for typos, brackets, incorrect "::" usages, and white-space style * tag 'devicetree-for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (40 commits) dt-bindings: interconnect: qcom-bwmon: Add Maili cpu-bwmon compatible dtc: dt-check-style: Simplify setting depth of DtsLine dtc: dt-check-style: Add missing /dts-v1/ to few test cases dt-bindings: power: reset: ti,keystone-reset: Convert to DT schema media: dt-bindings: ti,da850-vpif: Convert to dt-schema dt-bindings: devfreq: samsung,exynos-ppmu: Use standard regex syntax dt-bindings: interrupt-controller: mediatek,mt6577-sysirq: Drop invalid JSON pointer dt-bindings: arm: omap: Convert L4 interconnect to DT schema dt-bindings: power: Convert TI SmartReflex to DT schema of: reserved_mem: Introduce devres-managed initialization function dt-bindings: interrupt-controller: Add StarFive JHB100 plic dt-bindings: irq: sun7i-nmi: Document the Allwinner A733 NMI controller dt-bindings: Correct white-space style dt-bindings: fix typos and brackets docs: dt: submitting-patches: Mention expectation about dt-check-style docs: dt: maintainer: Add Devicetree and OF maintainer profile document docs: dt: writing-schema: Extend expectations about example part of binding dt-bindings: gpu: powervr-rogue: Add MediaTek MT8173 GPU of: base: Handle optional argument in of_parse_phandle_with_args_map() dt-bindings: update Sudeep Holla's email address ... |
||
|
Linus Torvalds
|
f4cdf7ca9a |
[GIT PULL for v7.3] media updates
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmqFXqYACgkQCF8+vY7k 4RWNtw//T8GAlfl1BDlqxcWQHPFLkGqogsZQUx8aITayUBXpOzWHK4neGM7QF2Za 9kmBi3OzWgW3hIfbW4/vQCBSdDmTLSjoYHjYsc2Y3Cr0RvxIoEFw0GILYzygE3gp y9sUFHs2S43Xh1n3LuTcu0woL8YcY/3SaMrvEA6uoSGmOETiIUIuNkLpUAOEWhrl hkpRHt160yFiADSr8Ve9435xnkf5GvC0rmf/jF/KSUuNXrQuEx+5LIWzmadQRhph 2o+LuOJClKenglguU+yMA/DNEJuxxT1LOUgEiw05U2I03N8DqpiCO8Mpp2/l0iXH fgYFpObz6LdkusUSePamR2XaA3+ViNM48ddg1xmo+1gYQ/ggipsVVWifZpGFs2hq lbHEPV2Va/hlVj5EZJh4E6PHzH3UkGii2zgiHw0W3XWtTXS/qVlRjQwlo4aZTKok KPlOCNY69XADqOCmSB+kEmuCULfqoiJChk0qeRJX+kETc7gT+Qx4Ej0WT9LdF+NV 7+gxMOgUJFuTr1HkhO5ZXWezikBsJUvLUFud8mV+4iAJldby23I4UEXUEPK7od+W 8RXyWvf9/0owE2E3dOqkoM2sz2WW17nWZe8bPV+NTX39qw5WBOpaPpZGxVzOWinS KUTHJkp/O/1ymWtMz4+B+8QTO7n6KUnVDdL4qkO8cOrJGZizxoU= =8fcn -----END PGP SIGNATURE----- Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - v4l2-core: added ISP statistics support and per-block validation - v4l2-core: Allow unknown HDR10 white point and luminance - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor - New codec: Milos: VPU v2.0 codec support - isp driver: gained support for Dreamchip RPPX1 ISP framework - vsp1 driver: gained support for RZ/T2H and RZ/N2H - Novalake driver: gained CVS support for new NVL hardware - dvb-core: fix feed leak on failed DMX_ADD_PID - several driver fixes, cleanups and minor improvements * tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits) media: ipu-bridge: check all DMI entries when overriding sensor rotation media: v4l2-async: avoid deleting unlinked ASC entry on link error media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement media: intel/ipu6: fix async notifier cleanup leak on parse error media: staging/ipu7: fix async notifier UAF on probe error path media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem() media: rcar-isp: Fix VSPX reference leaks media: rcar-isp: Release ISPCORE resources media: i2c: imx415: Release runtime PM reference on VBLANK error media: i2c: imx415: Return test pattern write errors media: renesas: vsp1: Declare index variables in for loop statement media: renesas: vsp1: Make reset control optional to support platforms without a reset line media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs media: nxp: imx8-isi: Add additional 32-bit RGB format support media: nxp: imx8-isi: Add 16-bit raw Bayer format support media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks media: nxp: imx8-isi: Correct color map between V4L2 and ISI ... |
||
|
Thierry Reding
|
0771da4fb5 |
dt-bindings: PCI: tegra264: Switch to PCIe Root Port bindings
Switch to using the PCIe Root Port bindings in preparation for using the standard WAKE# handling. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20260814-tegra264-pcie-v10-2-05d08c592b05@nvidia.com |
||
|
Thierry Reding
|
d86c91afe2 |
dt-bindings: PCI: tegra264: Strictly distinguish C0 from C1-C5
Instead of using the ECAM registers as the first entry, strictly make a distinction between C0 and C1-C5. This is needed because otherwise the unit address doesn't match the first "reg" entry. The ordering of these nodes cannot be changed to follow the ECAM addresses because that would put them outside of their "control bus" hierarchy since the ECAM address space is a global one outside of any of the control busses. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20260814-tegra264-pcie-v10-1-05d08c592b05@nvidia.com |
||
|
Linus Torvalds
|
e5c91aac49 |
sound updates for 7.3-rc1
It was a fairly busy development cycle -- the changes spread over from
the core side to leaf drivers, with lots of cleanups and enhancements.
Here we go, some highlights:
* ALSA core:
- Extension of ALSA control component list ABI
- Locking optimization and RCU conversion of ALSA sequencer core
- A few hardening fixes for UMP and sequencer core
- Drop __bitwise and __force prefix from UAPI definitions
* ASoC:
- Automatic DAI format selection code deployment across many drivers
- Sorting of register default tables to prevent ordering issues in
many drivers
- Lots of code cleanups and refactoring
- Updates in Qualcomm driver stack
- New platforms: AMD ACP7.B/F, Cirrus Logic CS35L62, Loongson 2K0300,
Meson GX, Qualcomm LPI MI2S, SM8475, WSA855X, Realtek RT1321 VA1/2
and RT766/7
* HD-audio:
- Support for AW88399 HD-audio side codec for Lenovo Legion laptops
- Support for Hygon and Lisuan HDMI controllers
- Robustness fixes for wild device binding
- Lots of quirks/fixups: Realtek and Conexant codecs for ASUS, Lenovo,
Acer, etc
* USB-audio:
- Support for Pioneer DJ DJM-S11
- Scarlett2/FCP private URB notification fixes
- Extended quirk_flags to 64bit
- Hardening fixes for 6fire, bcd2000, usx2y
- Device-specific quirks for Mackie, Valeton, SPACETOUCH
* General:
- Auto-cleanup for put_device() and firmware loading across multiple
platforms
-----BEGIN PGP SIGNATURE-----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=kp17
-----END PGP SIGNATURE-----
Merge tag 'sound-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It was a fairly busy development cycle - the changes spread over from
the core side to leaf drivers, with lots of cleanups and enhancements.
Here we go, some highlights:
ALSA core:
- Extension of ALSA control component list ABI
- Locking optimization and RCU conversion of ALSA sequencer core
- A few hardening fixes for UMP and sequencer core
- Drop __bitwise and __force prefix from UAPI definitions
ASoC:
- Automatic DAI format selection code deployment across many drivers
- Sorting of register default tables to prevent ordering issues in
many drivers
- Lots of code cleanups and refactoring
- Updates in Qualcomm driver stack
- New platforms: AMD ACP7.B/F, Cirrus Logic CS35L62, Loongson
2K0300, Meson GX, Qualcomm LPI MI2S, SM8475, WSA855X, Realtek
RT1321 VA1/2 and RT766/7
HD-audio:
- Support for AW88399 HD-audio side codec for Lenovo Legion laptops
- Support for Hygon and Lisuan HDMI controllers
- Robustness fixes for wild device binding
- Lots of quirks/fixups: Realtek and Conexant codecs for ASUS,
Lenovo, Acer, etc
USB-audio:
- Support for Pioneer DJ DJM-S11
- Scarlett2/FCP private URB notification fixes
- Extended quirk_flags to 64bit
- Hardening fixes for 6fire, bcd2000, usx2y
- Device-specific quirks for Mackie, Valeton, SPACETOUCH
General:
- Auto-cleanup for put_device() and firmware loading across multiple
platforms"
* tag 'sound-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (791 commits)
ALSA: hda: Fix connection list comparison in proc output
ALSA: docs: fix dead link to Intel HD-audio spec
ALSA: usb-audio: Add delay quirk for SPACETOUCH USB Audio
ALSA: hda: Add Lisuan HDMI controller and codec support
ALSA: hda/realtek: Fix Lenovo Yoga Slim 7 14AKP10 quirk ordering
ALSA: hda/tas2781: Add hardware stabilization delay during firmware load retries
ALSA: hda/realtek: Fix mute LED for HP Victus 15-fa1xxx (MB 8C3F)
ALSA: hda/realtek: Add micmute LED quirk for Acer Aspire A515-57
ASoC: tas2783-sdw: do not treat read-only Controls as writable
ASoC: SOF: validate topology volume range before allocation
ASoC: cs35l56: Use IRQ provided by the SoundWire core
soundwire: bus_type: Create IRQ mapping before calling driver probe()
ASoC: cs35l56: Move cs35l56_irq_request() after cs35l56_irq()
ASoC: cs35l56: Request IRQ in cs35l56_common_probe()
ALSA: core: Fix use-after-free in snd_card_do_free()
ALSA: hda/realtek: Drop duplicate quirk for Lenovo 0x17aa:0x38df
ALSA: usb-audio: Rename the Audient iD14 monitor mix volume control
ASoC: tas2781: Refactor calibration start kcontrol creation to separate helper
ASoC: dt-bindings: es8316: Fix supply property constraints
ALSA: seq: midi: Serialize input teardown with event_input
...
|