GVT code uses macros for register offsets that require display internal
structures. This makes clean separation of display code and
modularization difficult.
Introduce APIs to abstract offset calculations:
- intel_display_device_pipe_offset()
- intel_display_device_trans_offset()
- intel_display_device_cursor_offset()
- intel_display_device_mmio_base()
These APIs return absolute base offsets for the respective register
groups, allowing GVT to compute MMIO addresses without using internal
macros or struct fields. This prepares the path to separate
display-dependent code from i915/gvt/*.
v2:
- Build GVT APIs only when GVT is actually enabled. (Jani)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com> (#v1)
Link: https://patch.msgid.link/20251219060302.2365123-3-ankit.k.nautiyal@intel.com
Introduce INTEL_DISPLAY_DEVICE_*_OFFSET() macros to compute absolute
MMIO offsets for pipe, transcoder, and cursor registers.
Update _MMIO_PIPE2/_MMIO_TRANS2/_MMIO_CURSOR2 to use these macros
for cleaner abstraction and to prepare for external API usage (e.g. GVT).
Also move DISPLAY_MMIO_BASE() to intel_display_device.h so it can be
abstracted in GVT, allowing register macros to resolve via
exported helpers rather than peeking into struct intel_display.
v2: Wrap the macro argument usages in parenthesis. (Jani)
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20251219060302.2365123-2-ankit.k.nautiyal@intel.com
A number of places that include i915_drv.h only need it to get from
display to i915 to uncore. We have to_intel_uncore() for that, use it to
avoid the i915_drv.h include.
v2: Rebase
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/44a5d526a097ab9276e60162263fa8cd23325ce7.1766406794.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Use static inline instead of macro for
intel_uncore_arm_unclaimed_mmio_detection() to avoid the need for
__maybe_unused annotations.
v2: Rebase, intel_uncore_arm_unclaimed_mmio_detection()
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> # v1
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/7ddee71952315e70e4a7df23638100b664e293bd.1766406794.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When DSC is enabled on a pipe, the pipe pixel rate input to the
CDCLK frequency and pipe joining calculation needs an adjustment to
account for compression overhead "bubbles" added at each horizontal
slice boundary.
Account for this overhead while computing min cdclk required for DSC.
v2:
- Get rid of the scaling factor and return unchanged pixel-rate
instead of 0.
v3:
- Use mul_u32_u32() for the bubble-adjusted pixel rate to avoid 64x64
multiplication and drop redundant casts in DIV_ROUND_UP_ULL(). (Imre)
Bspec:68912
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251223150826.2591182-1-ankit.k.nautiyal@intel.com
Use the consolidated HDMI tables before we try to compute them via
algorithm. The reason is that these are the ideal values and even
though the values calculated via the HDMI algorithm are correct but
not always ideal. This is done for C20 and already exists for C10.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20251223063422.1444968-1-suraj.kandpal@intel.com
With the i915 switch to generic fault injection, display no longer needs
the compat i915_utils.h. Remove it, along with a few includes.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/20251219104036.855258-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Move intel_reuse_initial_plane_obj() into common display code, and split
the ->find_obj hook into ->alloc_obj and ->setup hooks.
Return the struct drm_gem_object from ->alloc_obj in preparation for
moving more things to display.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/c71011dbb11afaa5c4da30aa2627833374300d63.1765812266.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add the initial plane handling functions to the display parent
interface. Add the call wrappers in dedicated intel_initial_plane.c
instead of intel_parent.c, as we'll be refactoring the calls heavily.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/ab91c891677fe2bb83bf5aafa5ee984b2442b84d.1765812266.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We use forcewake to prevent the SoC from actually entering
PC8 while performing the PC8 disable sequence. Hide that
behind a new parent interface to eliminate the naked
forcewake/uncore usage from the display power code.
v2: Mark the interface optional and warn if
someone calls it when not provided (Jani)
Include the header to make sure the extern
declaration matches the definition (Jani)
v3: Rebase due to shuffling
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251218182052.18756-1-ville.syrjala@linux.intel.com
A new step has been added to Bspec with respect to the C10 PHY, which
instructs the driver to toggle powerdown value for boths PHY lanes to P0
and then P2 when driving an HDMI connector. This update in the Bspec
reflects the changes required by Wa_14026084006, so document it.
Note that, unlike other display workarounds, this one is actually tied
to the C10 PHY and not to a specific display IP. As such, let's just
document it in intel_cx0_phy.c instead of adding it to
intel_display_wa.c.
Bspec: 64568, 74489
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patch.msgid.link/20251216-wa_14026084006-c10-hdmi-toggle-powerdown-v1-2-08677b03e2f1@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
We do not use the function intel_cx0_powerdown_change_sequence()
exclusively to take the PHY out of reset, hence the warning message on
failure is misleading. Furthermore, in an upcoming change, we will also
use that function to implement a new C10 PHY workaround.
Use a more accurate message by saying that we failed to change the
powerdown state.
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patch.msgid.link/20251216-wa_14026084006-c10-hdmi-toggle-powerdown-v1-1-08677b03e2f1@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
There is no reason to accept an invalid minimum/maximum DSC source input
BPP value (i.e a minimum DSC input BPP value above the maximum pipe BPP
or a maximum DSC input BPP value below the minimum pipe BPP value), fail
the state computation in these cases.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-17-imre.deak@intel.com
There is no reason to accept an invalid maximum sink compressed BPP
value (i.e. 0), fail the state computation in this case.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-16-imre.deak@intel.com
There is no reason to accept a minimum/maximum link BPP value above the
maximum throughput BPP value, fail the state computation in this case.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-15-imre.deak@intel.com
Make sure that state computation fails if the minimum/maximum link BPP
values got invalid as a result of limiting both of these values
separately to the corresponding source/sink capability limits.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-14-imre.deak@intel.com
The pipe joiner maximum compressed BPP must be limited based on the pipe
joiner memory size and BW, do that for all DP outputs by adjusting the
max compressed BPP value already in
intel_dp_compute_config_link_bpp_limits() (which is used by all output
types).
This way the BPP doesn't need to be adjusted in
dsc_compute_compressed_bpp() (called for DP-SST after the above limits
were computed already), so remove the adjustment from there.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-13-imre.deak@intel.com
A DSC compressed stream requires FEC (except for eDP), which has a BW
overhead on non-UHBR links that must be accounted for explicitly. Do
that during computing the required BW.
Note that the overhead doesn't need to be accounted for on UHBR links
where FEC is always enabled and so the corresponding overhead is part of
the channel coding efficiency instead (i.e. the overhead is part of the
available vs. the required BW).
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-12-imre.deak@intel.com
On MST links the symbol alignment and SSC have a BW overhead, which
should be accounted for when calculating the required stream BW, do so
during mode validation for an uncompressed stream.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-11-imre.deak@intel.com
Use intel_dp_effective_data_rate() to calculate the required link BW for
compressed streams on non-UHBR DP-SST links. This ensures that the BW is
calculated the same way for all DP output types and DSC/non-DSC modes,
during mode validation as well as during state computation.
This approach also allows for accounting with BW overhead due to DSC,
FEC being enabled on a link. Acounting for these will be added by
follow-up changes.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-10-imre.deak@intel.com
Use intel_dp_effective_data_rate() to calculate the required link BW for
eDP, DP-SST and MST links. This ensures that the BW is calculated the
same way for all DP output types, during mode validation as well as
during state computation. This approach also allows for accounting with
BW overheads due to the SSC, DSC, FEC being enabled on a link, as well
as due to the MST symbol alignment on the link. Accounting for these
overheads will be added by follow-up changes.
This way also computes the stream BW on a UHBR link correctly, using the
corresponding symbol size to effective data size ratio (i.e. ~97% link
BW utilization for UHBR vs. only ~80% for non-UHBR).
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-9-imre.deak@intel.com
is_bw_sufficient_for_dsc_config() should return true if the required BW
equals the available BW, make it so.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-8-imre.deak@intel.com
Factor out intel_dp_link_bw_overhead(), used later for BW calculation
during DP SST mode validation and state computation.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-7-imre.deak@intel.com
The encoder state computation should use the
drm_display_mode::crtc_clock member, instead of the clock member, the
former one possibly having a necessary adjustment wrt. to the latter
due to driver specific constraints. In practice the two values should
not differ at spots changed in this patch, since only MSO and 3D modes
would make them different, neither MSO or 3D relevant here, but still
use the expected crtc_clock version for consistency.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-6-imre.deak@intel.com
Convert intel_dp_output_bpp() and intel_dp_mode_min_output_bpp() to
return an x16 fixed point bpp value, as this value will be always the
link BPP (either compressed or uncompressed) tracked in the same x16
fixed point format.
While at it rename
intel_dp_output_bpp() to intel_dp_output_format_link_bpp_x16() and
intel_dp_mode_min_output_bpp() to intel_dp_mode_min_link_bpp_x16() to
better reflect that these functions return an x16 link BPP value
specific to a particular output format or mode.
Also rename intel_dp_output_bpp()'s bpp parameter to pipe_bpp, to
clarify which kind of (pipe vs. link) BPP the parameter is.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-5-imre.deak@intel.com
A DSC sink supporting DSC slice count N, not necessarily supports slice
counts less than N. Hence the driver should check the sink's support for
a particular slice count before using that slice count, fix
intel_dp_dsc_get_slice_count() accordingly.
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-4-imre.deak@intel.com
A DSC sink supporting DSC slice count N, not necessarily supports slice
counts less than N. Hence the driver should check the sink's support for
a particular slice count before using that slice count. Add the helper
functions required for this.
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-3-imre.deak@intel.com
drm_colorop.h doesn't need the intel_display_types.h include for
anything. Don't include headers from headers if it can be avoided.
Fixes: 3e9b06559a ("drm/i915: Add intel_color_op")
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20251218141807.409751-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
WCL supports a maximum of HBR3 8.1 Gbps for both eDP/DP.
Limit the max source rate to HBR3 for WCL.
v2: Move the check inside mtl_max_source_rate(). (Suraj)
Bspec:74286
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20251122053651.759389-1-ankit.k.nautiyal@intel.com
Switch error injection testing from i915_inject_probe_failure
to ALLOW_ERROR_INJECTION. Here taken out calls to
i915_inject_probe_failure and changed to use
ALLOW_ERROR_INJECTION for the same functions.
Below functions are dropped from testing since I
couldn't hit those at module bind time, testing
these would just fail the tests. To include these
in test would need to find way to cause resetting in i915
which would trigger these:
intel_gvt_init
intel_wopcm_init
intel_uc_fw_upload
intel_gt_init with expected -EIO (-EINVAL is tested)
lrc_init_wa_ctx
intel_huc_auth
guc_check_version_range
intel_uc_fw_fetch
uc_fw_xfer
__intel_uc_reset_hw
guc_enable_communication
uc_init_wopcm
..and all stages of __force_fw_fetch_failures
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patch.msgid.link/20251216080754.221974-2-juhapekka.heikkila@gmail.com
Commit 469c1c9eb6 ("kernel-doc: Issue warnings that were silently
discarded") started emitting warnings for cases that were previously
silently discarded. One such case is in intel_wakeref.h:
Warning: drivers/gpu/drm/i915/intel_wakeref.h:156 expecting prototype
for __intel_wakeref_put(). Prototype was for INTEL_WAKEREF_PUT_ASYNC()
instead
Arguably kernel-doc should be able to handle this, as it's valid C, but
having the flags defined between the function declarator and the body is
just asking for trouble. Move the INTEL_WAKEREF_PUT_* macros away from
there, making kernel-doc's life easier.
While at it, reduce the unnecessary abstraction levels by removing the
enum, and append _MASK to INTEL_WAKEREF_PUT_DELAY for clarity.
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251215120908.3515578-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
