In cases where the requested minimum CDCLK exceeds all available
values for the current reference clock, the CDCLK selection logic
previously returned 0. This could result coverity division or
modulo by zero issue.
Introduce a fallback mechanism that returns platform's max_cdclk_freq
instead of 0.
v2: Update safe fallback value to max cdclk. (Ville)
v3: Update commit messgae (Mika)
Signed-off-by: Naladala Ramanaidu <ramanaidu.naladala@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20251017150526.781715-1-ramanaidu.naladala@intel.com
Use the similar logic in skl_plane_has_planar(),
glk_plane_has_planar() and skl_plane_has_rc_ccs() to avoid
having to think too much when comparing the three.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251009211313.30234-9-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Extract glk_plane_has_planar() out from skl_plane_has_planar()
to make the logic a bit less convoluted.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251009211313.30234-8-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
We don't need to check for crtc hw.enable because that would also
imply that the plane is disabled and we would have bailed out already
earlier.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251009211313.30234-7-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Make the skl+ plane size checks a bit more regular by
adding intel_plane_min_height() instead of using a hardcoded
1 everwhere.
v2: s/1/min_height/ one more time
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251009211313.30234-6-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Currently we check the plane min size only for the Y plane.
Extend the check to the CbCr plane as well.
This will also allow us to remove the planar format check from
icl_plane_min_width() since the +2 on the CbCr plane is equivalent
to +4 on the Y plane. I suspect this approach actually models the
hardware issue more accurately.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251009211313.30234-5-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
ADL+ no longer need the plane min width w/a (Wa_14011264657 or
Wa_14011050563). Don't apply it there. DG2 still needs it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251009211313.30234-3-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
There's no point in doing all the other checks in
intel_vrr_is_capable() if the platform doesn't support VRR at all
Check HAS_VRR() before wasting time on the other checks.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251020185038.4272-23-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
The coment in intel_vrr_extra_vblank_delay() is a bit outdated now
that we generally got rid of the "vblank delay" stuff. Update the
comment to better describe the current state of things.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251020185038.4272-22-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
We generally use the 'old_crtc_state' in the disable functions to
make it clear these generally get called when the hardware is
still using the old crtc state rather than the new crtc state.
Rename the intel_vrr_transcoder_disable() 'crtc_state' parameter
to 'old_crtc_state' for consistency.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251020185038.4272-19-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Currently, depending on vrr.enable, we may write TRANS_VRR_CTL from
both intel_vrr_set_transcoder_timings() and intel_vrr_transcoder_enable()
on !always_use_vrr_tg() platforms. Streamline this so that we just
always write it from intel_vrr_set_transcoder_timings(), and
never from intel_vrr_transcoder_enable().
The main benefit is that intel_vrr_transcoder_enable() becomes symmetric
to intel_vrr_transcoder_disable().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251020185038.4272-16-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Currently we always disable the VRR timing generator in
intel_vrr_transcoder_disable(). But doing so on !always_use_vrr_tg()
platforms is redundant since we've alreayd disabled the VRR timing
generator earlier in intel_vrr_disable(). Do the disable in
intel_vrr_transcoder_disable() only on always_on_vrr_tg() platforms.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251020185038.4272-15-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Extract the VRR timing generator enable into intel_vrr_tg_enable(),
as a counterpart to intel_vrr_tg_disable().
Note that the CMRR part is probably broken, but so are other
things in the CMRR implementation, and thus it is currently
disabled.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251020185038.4272-14-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Currently intel_vrr_disable() writes TRANS_VRR_CTL() with
trans_vrr_ctl(), whereas intel_vrr_transcoder_disable() always
writes just a plain 0. Write trans_vrr_ctl() in both places to
unify the code, allowing for more shared code in the future.
Since the VRR timing generator will be disabled by the
TRANS_VRR_CTL write it doesn't really matter what we write to
the register (other than VRR_CTL_VRR_ENABLE that is).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251020185038.4272-12-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
EMP_AS_SDL_TL replaces the TRANS_VRR_VSYNC for the purposes of
setting the AS SDP transmission line. Move the EMP_AS_SDL_TL into
intel_vrr_set_transcoder_timings() since that's where we write
TRANS_VRR_VSYNC as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251020185038.4272-11-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
The way intel_vrr_compute_*_timings() works is rather confusing.
First intel_vrr_compute_config() assigns the computed vmin/vmax
into crtc_state->vrr.{vmin,vmax}, and then either
intel_vrr_compute_vrr_timings() leaves them untouched or
intel_vrr_compute_{cmrr,fixed_rr}_timings() overwrite them with
something else.
Clean this up by moving all crtc_state->vrr.{vmin,vmax} assignments
into intel_vrr_compute_*_timings().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251020185038.4272-7-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
The "vblank delay" we are including in the crtc state dump is
meaningful only when running with fixed refresh rate timings.
With VRR timings one has to look at the VRR state to figure out
the same thing.
Since we already dump the position of the delayed vblank for
both fixed refresh rate and VRR timings, this "vblank delay"
thing seems pretty much pointless now. Get rid of it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251020185038.4272-4-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
If SCL is changing we need to take the LRR codepath to update
it during a fastset. Account for that in lrr_params_changed().
The current code will only notice the SCL change if the position
of the delayed vblank also changes. But that might not happen
when using the VRR timing generator because the delayed vblank
is then defined by the guardband instead of the SCL.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251020185038.4272-3-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
On TGL the hardware always needs TRANS_VBLANK.VBLANK_START
to be programemd with VACTIVE+SCL. Make it so.
The current way of programming it with crtc_vblank_start only
works for the legacy timing generator, as there the delayed
vblank does happen exactly at VACTIVE+SCL.
But if one tries to change intel_vrr_always_use_vrr_tg() to
always use the VRR timing generator on TGL, crtc_vblank_start
will point to the VRR timing generator's delayed vblank,
which may not match VACTIVE+SCL.
Fortunately the state checker caught the issue right away
when I tried intel_vrr_always_use_vrr_tg()==true on TGL.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251020185038.4272-2-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
xe_device.h and xe_device_has_flat_ccs() are no longer needed since
commit 3a5c5c472c ("drm/i915/display: add HAS_AUX_CCS() feature
check").
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20251022121450.452649-2-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We've stopped using struct drm_i915_private in intel_fb.c and
skl_universal_plane.c, so we can drop the i915_drv.h includes.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20251022121450.452649-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
DMC_EVT_CTL_ENABLE cannot be cleared once set. So currently
any event we never enable will have DMC_EVT_CTL_ENABLE cleared,
whereas any event which has been enabled even once will have
DMC_EVT_CTL_ENABLE set. For that reason assert_dmc_loaded() has
a special case to ignore any mismatches in DMC_EVT_CTL_ENABLE.
Eliminate the special case by always configuring DMC_EVT_CTL_ENABLE
based on the original firmware event definition. Now all
event handlers will have DMC_EVT_CTL_ENABLE set, whether or
not the event has been enabled in the past.
All disabled event handlers will still have the event type set
to DMC_EVENT_FALSE so they will not actually trigger despite
DMC_EVT_CTL_ENABLE being set.
Tested-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251022100718.24803-4-ville.syrjala@linux.intel.com
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: Imre Deak <imre.deak@intel.com>
TGL/ADL-S DMC firmware incorrectly uses the undelayed vblank
trigger for the HRR event, when it should be using the delayed
vblank trigger.
Fixed DMC firmware was never relaesed and isntead the Windows
driver just fixes this up by hand. Follow suit.
Not that we actually enable the HRR event currently. But let's
fix up the event ID, just in case someone ever needs to enable
this.
Tested-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251022100718.24803-3-ville.syrjala@linux.intel.com
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: Imre Deak <imre.deak@intel.com>
On ADL-S the main DMC HRR event DMC_EVT_CTL/HTP are never
restored to their previous values during DC6 exit. This
angers assert_dmc_loaded(), and basically makes the HRR
handler unusable because we don't rewrite EVT_HTP when
enabling DMC events.
Let's just clear the HRR EVT_CTL/HTP to zero from the
beginnning so that the expected value matches the post-DC6
reality.
I suppose if we ever had actual use for HRR we'd have to both,
reject HRR+PSR, and reprogram EVT_HTP when enabling the event.
But for now we don't care about HRR so keeping both registers
zeroed is fine.
Cc: stable@vger.kernel.org
Tested-by: Petr Vorel <pvorel@suse.cz>
Fixes: 43175c92d4 ("drm/i915/dmc: Assert DMC is loaded harder")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15153
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251022100718.24803-2-ville.syrjala@linux.intel.com
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: Imre Deak <imre.deak@intel.com>
The intel_crtc_state::fec_enable check in intel_dp_needs_8b10b_fec() is
redundant drop it: originally it ensured that the FEC enabled state for
a CRTC other than the CRTC intel_dp_needs_8b10b_fec() called for is
preserved, even if DSC is not enabled for the latter CRTC. The way FEC
gets enabled for all the CRTCs on an 8b10b MST link is changed by
commit 7c027070e9 ("drm/i915/dp_mst: Track DSC enabled status on the
MST link") and
commit 470b84af45 ("drm/i915/dp_mst: Recompute all MST link CRTCs if
DSC gets enabled on the link")
depending on intel_dsc_enabled_on_link() in intel_dp_needs_8b10b_fec()
instead of the above fec_enable check. Drop the check.
Suggested-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20251020154438.416761-1-imre.deak@intel.com
There is no reason in debugfs why PSR has been disabled. Currently,
without this information, IGT tests cannot decide whether PSR has
been disabled on purpose or was it abnormal behavior. Because of it,
the status of the test cannot be decided correctly.
Add no_psr_reason field into struct intel_psr. Add no_psr_reason
into struct intel_crtc_state to prevent staying out of sync when
_psr_compute_config is not using computed state. Write the reason,
e.g. PSR setup timing not met, into proper PSR debugfs file. Update
the reason from new_crtc_state in intel_psr_pre_plane_update. Extend
format of debugfs file to have reason when it is non-NULL. Clean the
reason when PSR is activated.
Refactor intel_psr_post_plane_update to use no_psr_reason along
keep_disabled.
Changelog:
v10->v11
- update the reason from new_crtc_state instead of old_crtc_state [Jouni]
v9->v10
- log reason into intel_crtc_state instead of intel_dp->psr [Jouni]
- remove clearing no_psr_reason in intel_psr_compute_config [Jouni]
- change update of no_psr_reason into more readable form [Jouni]
v8->v9
- add no_psr_reason into struct intel_crtc_state [Jouni]
- update the reason in intel_psr_pre_plane_update [Jouni]
- elaborate on motivation of the feature in commit message [Sebastian]
- copy changelog to commit message [Sebastian]
v7->v8
- reset no_psr_reason at the begin of intel_psr_compute_config [Jouni]
- restore keep_disabled [Jouni]
- drop setting "Sink not reliable" [Jouni]
- add WA number [Jouni]
- if non-NULL, write no_psr_reason after PSR mode [Jouni]
v6->v7
- rebase onto new drm-tip
v5->v6
- move setting no_psr_reason to intel_psr_post_plane_update [Jouni]
- remove setting no_psr_reason when disabling PSR is temporary [Jouni]
v4->v5
- fix indentation errors from checkpatch
v3->v4
- change format of logging workaround #1136
v2->v3
- change reason description to be more specific [Mika]
- remove BSpecs number & WA number from being written into no_psr_reason
- replace spaces with tabs
v1->v2
- set other reasons than "PSR setup timing not met"
- clear no_psr_reason when activating PSR.
Signed-off-by: Michał Grzelak <michal.grzelak@intel.com>
Reviewed-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20251002095640.1347990-2-michal.grzelak@intel.com
Currently the guardband is optimized only for platforms where the
VRR timing generator is always ON.
Extend the usage of optimized guardband to all VRR supporting platforms.
v2: Drop check for `crtc_state->vrr.enable` and just return true
unconditionally from intel_vrr_use_optimized_guardband(). (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20251017123504.2247954-6-ankit.k.nautiyal@intel.com
In the current VRR implementation, vrr.vmin and vrr.guardband are set such
that they do not need to change when switching from fixed refresh rate to
variable refresh rate. Specifically, vrr.guardband is always set to match
the vblank length. This approach works for most cases, but not for LRR,
where the guardband would need to change while the VRR timing generator is
still active.
With the VRR TG always active, live updates to guardband are unsafe and not
recommended. To ensure hardware safety, guardband was moved out of the
!fastset block, meaning any change now requires a full modeset.
This breaks seamless LRR switching, which was previously supported.
Since the problem arises from guardband being matched to the vblank length,
solution is to use a minimal, sufficient static value, instead. So we use a
static guardband defined during mode-set that fits within the smallest
expected vblank and remains unchanged in case of features like LRR where
vtotal changes. To compute this minimum guardband we take into account
latencies/delays due to different features as mentioned in the Bspec.
Introduce a helper to compute the minimal sufficient guardband.
On platforms where the VRR timing generator is always ON, we optimize the
guardband regardless of whether the display is operating in fixed or
variable refresh rate mode.
v2:
- Use max of sagv latency and skl_wm_latency(1) for PM delay
computation. (Ville)
- Avoid guardband optimization for HDMI for now. (Ville)
- Allow guardband optimization only for platforms with
intel_vrr_always_use_vrr_tg = true. (Ville)
- Add comments for PM delay and a #TODO note for HDMI.
v3: Drop the variable prefill_min_guardband. (Ville)
Bspec: 70151
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20251017123504.2247954-5-ankit.k.nautiyal@intel.com
Add a helper to compute vblank time needed for transmitting specific
DisplayPort SDPs like PPS, GAMUT_METADATA, and VSC_EXT. Latency is
based on line count per packet type.
This will be used to ensure adequate guardband when features like DSC/HDR
are enabled.
v2: Correct the lines required for PPS SDP. (Jouni)
Bspec: 70151
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20251017123504.2247954-3-ankit.k.nautiyal@intel.com
Introduce a helper to compute the max link wake latency when using
Auxless/Aux wake mechanism for PSR/Panel Replay/LOBF features.
This will be used to compute the minimum guardband so that the link wake
latencies are accounted and these features work smoothly for higher
refresh rate panels.
v2:
- Account for flag `req_psr2_sdp_prior_scanline` and scl lines while
computing min guardband. (Jouni)
- Use wake lines only for eDP with panel_replay and sel_update flags
set. (Jouni)
Bspec: 70151, 71477
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20251017123504.2247954-2-ankit.k.nautiyal@intel.com
Prevent enabling panel replay if the sink doesn't support this due to
DSC being enabled.
Panel replay has two modes, updating full frames or only selected
regions of the frame. If the sink doesn't support Panel Replay in full
frame update mode with DSC prevent Panel Replay completely if DSC is
enabled. If the sink doesn't support Panel Replay only in the selective
update mode while DSC is enabled, it will still support Panel Replay in
the full frame update mode, so only prevent selective updates in this
case.
v2:
- Use Panel Replay instead of PR in debug prints. (Jouni)
- Rebase on change tracking the link DSC state in the crtc state.
Cc: Jouni Högander <jouni.hogander@intel.com>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14869
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20251015161934.262108-8-imre.deak@intel.com
The state of all the CRTCs on an MST link must be recomputed, if DSC
gets enabled on any of the CRTCs on the link. For instance an MST
docking station's Panel Replay capability may depend on whether DSC is
enabled on any of the dock's streams (aka CRTCs). To assist the Panel
Replay state computation for a CRTC based on the above, track in the
CRTC state if DSC is enabled on any CRTC on an MST link.
The intel_link_bw_limits::force_fec_pipes mask is used for a reason
similar to the above: enable FEC on all CRTCs of a non-UHBR (8b10b) MST
link if DSC is enabled on any of the link's CRTCs. The FEC enabled state
for a CRTC doesn't indicate if DSC is enabled on a UHBR MST link (FEC is
always enabled by the HW for UHBR, hence it's not tracked by the
intel_crtc_state::fec_enable flag for such links, where this flag is
always false).
Based on the above, to be able to determine the DSC state on both
non-UHBR and UHBR MST links, track the more generic DSC-enabled-on-link
state (instead of the FEC-enabled-on-link state) for each CRTC in
intel_link_bw_limits.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20251015161934.262108-7-imre.deak@intel.com
Track whether DSC is enabled on any CRTC on a link. On DP-SST (and DSI)
this will always match the CRTC's DSC state, those links having only a
single stream (aka CRTC). For instance, on DP-MST if DSC is enabled for
CRTC#0, but disabled for CRTC#1, the DSC/FEC state for these CRTCs will
be as follows:
CRTC#0:
- compression_enable = true
- compression_enabled_on_link = true
- fec_enable = true for 8b10b, false for 128b132b
CRTC#1:
- compression_enable = false
- compression_enabled_on_link = true
- fec_enable = true for 8b10b, false for 128b132b
This patch only sets compression_enabled_on_link for CRTC#0 above and
enables FEC on CRTC#0 if DSC was enabled on any other CRTC on the 8b10b
MST link. A follow-up change will make sure that the state of all the
CRTCs (CRTC#1 above) on an MST link is recomputed if DSC gets enabled on
any CRTC, setting compression_enabled_on_link and fec_enable for these.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20251015161934.262108-6-imre.deak@intel.com
Export the helper function to determine if FEC is required on a non-UHBR
(8b10b) SST or MST link. A follow up change will take this into use for
MST as well.
While at it determine the output type from the CRTC state, which allows
dropping the intel_dp argument. Also make the function return the
required FEC state, instead of setting this in the CRTC state, which
allows only querying this requirement, without changing the state.
Also rename the function to intel_dp_needs_8b10b_fec(), to clarify that
the function determines if FEC is required on an 8b10b link (on 128b132b
links FEC is always enabled by the HW implicitly, so the function will
return false for that case).
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20251015161934.262108-4-imre.deak@intel.com
