stmmac registers a 32-bit. u32 is unsigned int. The use of BIT() and
GENMASK() leads to integer promotion to unsigned long in expressions
such as:
u32 old = foo;
dev_info(dev, "%08x %08x\n", old, old & BIT(1));
resulting in arg2 being accepted as compatible with the format string
and arg3 warning that the argument does not match (because the former
is unsigned int, and the latter is unsigned long.)
Fix this by defining 32-bit register bits using BIT_U32() and
GENMASK_U32() macros.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vevHh-00000002YoM-1TYL@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
clang is unable to inline the memset() calls in net/core/skbuff.c
when initializing allocated sk_buff.
memset(skb, 0, offsetof(struct sk_buff, tail));
This is unfortunate, because:
1) calling external memset_orig() helper adds a call/ret and
typical setup cost.
2) offsetof(struct sk_buff, tail) == 0xb8 = 0x80 + 0x38
On x86_64, memset_orig() performs two 64 bytes clear,
then has to loop 7 times to clear the final 56 bytes.
skbuff_clear() makes sure the minimal and optimal code
is generated.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260109203836.1667441-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit says:
====================
r8169: add support for RTL8127ATF (10G Fiber SFP)
RTL8127ATF supports a SFP+ port for fiber modules (10GBASE-SR/LR/ER/ZR and
DAC). The list of supported modes was provided by Realtek. According to the
r8127 vendor driver also 1G modules are supported, but this needs some more
complexity in the driver, and only 10G mode has been tested so far.
Therefore mainline support will be limited to 10G for now.
The SFP port signals are hidden in the chip IP and driven by firmware.
Therefore mainline SFP support can't be used here.
The PHY driver is used by the RTL8127ATF support in r8169.
RTL8127ATF reports the same PHY ID as the TP version. Therefore use a dummy
PHY ID.
====================
Link: https://patch.msgid.link/c2ad7819-85f5-4df8-8ecf-571dbee8931b@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RTL8127ATF supports a SFP+ port for fiber modules (10GBASE-SR/LR/ER/ZR and
DAC). The list of supported modes was provided by Realtek. According to the
r8127 vendor driver also 1G modules are supported, but this needs some more
complexity in the driver, and only 10G mode has been tested so far.
Therefore mainline support will be limited to 10G for now.
The SFP port signals are hidden in the chip IP and driven by firmware.
Therefore mainline SFP support can't be used here.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Link: https://patch.msgid.link/5c390273-458f-4d92-896b-3d85f2998d7d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RTL8127ATF supports a SFP+ port for fiber modules (10GBASE-SR/LR/ER/ZR and
DAC). The list of supported modes was provided by Realtek. According to the
r8127 vendor driver also 1G modules are supported, but this needs some more
complexity in the driver, and only 10G mode has been tested so far.
Therefore mainline support will be limited to 10G for now.
The SFP port signals are hidden in the chip IP and driven by firmware.
Therefore mainline SFP support can't be used here.
This PHY driver is used by the RTL8127ATF support in r8169.
RTL8127ATF reports the same PHY ID as the TP version. Therefore use a dummy
PHY ID. This PHY driver is used by the RTL8127ATF support in r8169.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/e3d55162-210a-4fab-9abf-99c6954eee10@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MCTP I2C slave callback did not handle I2C_SLAVE_READ_REQUESTED
events. As a result, i2c read event will trigger repeated reception of
old data, reset rx_pos when a read request is received.
Signed-off-by: Jian Zhang <zhangjian.3032@bytedance.com>
Link: https://patch.msgid.link/20260108101829.1140448-1-zhangjian.3032@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Motorcomm YT6801 is a PCIe ethernet controller based on DWMAC4 IP. It
integrates an GbE phy, supporting WOL, VLAN tagging and various types
of offloading. It ships an on-chip eFuse for storing various vendor
configuration, including MAC address.
This patch adds basic glue code for the controller, allowing it to be
set up and transmit data at a reasonable speed. Features like WOL could
be implemented in the future.
Signed-off-by: Yao Zi <me@ziyao.cc>
Tested-by: Mingcong Bai <jeffbai@aosc.io>
Tested-by: Runhua He <hua@aosc.io>
Tested-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: Sai Krishna <saikrishnag@marvell.com>
Link: https://patch.msgid.link/20260109093445.46791-4-me@ziyao.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
YT6801's internal PHY is confirmed as a GMII-capable variant of YT8531S
by a previous series[1] and reading PHY ID. Add support for
PHY_INTERFACE_MODE_GMII for YT8531S to allow the Ethernet driver to
reuse the PHY code for its internal PHY.
Link: https://lore.kernel.org/all/a48d76ac-db08-46d5-9528-f046a7b541dc@motor-comm.com/ # [1]
Co-developed-by: Frank Sae <Frank.Sae@motor-comm.com>
Signed-off-by: Frank Sae <Frank.Sae@motor-comm.com>
Signed-off-by: Yao Zi <me@ziyao.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260109093445.46791-3-me@ziyao.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "struct alg" object contains a union of 3 xfrm structures:
union {
struct xfrm_algo;
struct xfrm_algo_aead;
struct xfrm_algo_auth;
}
All of them end with a flexible array member used to store key material,
but the flexible array appears at *different offsets* in each struct.
bcz of this, union itself is of variable-sized & Placing it above
char buf[...] triggers:
ipsec.c:835:5: warning: field 'u' with variable sized type 'union
(unnamed union at ipsec.c:831:3)' not at the end of a struct or class
is a GNU extension [-Wgnu-variable-sized-type-not-at-end]
835 | } u;
| ^
one fix is to use "TRAILING_OVERLAP()" which works with one flexible
array member only.
But In "struct alg" flexible array member exists in all union members,
but not at the same offset, so TRAILING_OVERLAP cannot be applied.
so the fix is to explicitly overlay the key buffer at the correct offset
for the largest union member (xfrm_algo_auth). This ensures that the
flexible-array region and the fixed buffer line up.
No functional change.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Ankit Khushwaha <ankitkhushwaha.linux@gmail.com>
Link: https://patch.msgid.link/20260109152201.15668-1-ankitkhushwaha.linux@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The comment has been around ever since commit 1da177e4c3
("Linux-2.6.12-rc2") and can be removed. Remove it and indent the code
block accordingly.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260109121128.170020-2-thorsten.blum@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: cleanups and low priority fixes
Further cleanups and a few low priority fixes:
- Remove duplicated register definitions from header files
- Fix harmless wrong definition used for PTP message type in
descriptors
- Fix norm_set_tx_desc_len_on_ring() off-by-one error (and make
enh_set_tx_desc_len_on_ring() follow a similar pattern.)
Document the buffer size limits. I believe we never call
norm_set_tx_desc_len_on_ring() with 2KiB lengths.
- use u32 rather than unsigned int for 32-bit quantities in
descriptors
- modernise: convert to use FIELD_PREP() rather than separate mask
and shift definitions.
- Reorganise register and register field definitions: registers
defined in address offset order followed by their register field
definitions.
- Remove lots of unused register definitions.
====================
Link: https://patch.msgid.link/aV_q2Kneinrk3Z-W@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Potentially unused definitions were discovered using:
$ for m in $(grep '#define ' $header | sed -e 's,#define[ ]*\([^ ]*\)[ ].*,\1,;s,(.*,,'); do if ! grep -q $m *.c; then echo $m; fi; done
Each was verified, and then removed where truly unused.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vdtwI-00000002Gu6-1HYu@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arrange the register fields to be after their corresponding register
offset definitions, which groups all the definitions for a register
together.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vdtwD-00000002Gu0-0nTN@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have many xxx_SHIFT definitions along side their corresponding
xxx_MASK definitions for the various cores. Manually using the
shift and mask can be error prone, as shown with the dwmac4 RXFSTS
fix patch.
Convert sites that use xxx_SHIFT and xxx_MASK directly to use
FIELD_GET(), FIELD_PREP(), and u32_replace_bits() as appropriate.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vdtw8-00000002Gtu-0Hyu@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove many xxx_SHIFT definitions for descriptors, isntead using
FIELD_PREP(), FIELD_GET(), and u32_replace_bits() as appropriate to
manipulate the bitfields. This avoids potential errors where an
incorrect shift is used with a mask.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vdtw2-00000002Gto-3ZPt@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use u32 rather than unsigned int for 32-bit descriptor variables.
This will allow the u32 bitfield helpers to be used. Note, we use
__le32 for the in-memory descriptor structures.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vdtvx-00000002Gth-32RU@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
norm_set_tx_desc_len_on_ring() incorrectly tests the buffer length,
leading to a length of 2048 being squeezed into a bitfield covering
bits 10:0 - which results in the buffer 1 size being zero.
If this field is zero, buffer 1 is ignored, and thus is equivalent to
transmitting a zero length buffer.
The path to norm_set_tx_desc_len_on_ring() is only possible when the
hardware does not support enhanced descriptors (plat->enh_desc clear)
which is dependent on the hardware.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vdtvs-00000002Gtb-2U9G@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In dwmac4_wrback_get_rx_status(), the code extracts the PTP message
type from receive descriptor 1 using the dwmac enhanced descriptor
definitions:
message_type = (rdes1 & ERDES4_MSG_TYPE_MASK) >> 8;
This is defined as:
#define ERDES4_MSG_TYPE_MASK GENMASK(11, 8)
The correct definition is RDES1_PTP_MSG_TYPE_MASK, which is also
defined as:
#define RDES1_PTP_MSG_TYPE_MASK GENMASK(11, 8)
Use the correct definition, converting to use FIELD_GET() to extract
it without needing an open-coded shift right that is dependent on the
mask definition.
As this change has no effect on the generated code, there is no need
to treat this as a bug fix.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vdtvn-00000002GtV-1wCS@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In dwmac4_debug(), the wrong shift is used with the RXFSTS mask:
#define MTL_DEBUG_RXFSTS_MASK GENMASK(5, 4)
#define MTL_DEBUG_RXFSTS_SHIFT 4
#define MTL_DEBUG_RRCSTS_SHIFT 1
u32 rxfsts = (value & MTL_DEBUG_RXFSTS_MASK)
>> MTL_DEBUG_RRCSTS_SHIFT;
where rxfsts is tested against small integers 1 .. 3. This results in
the tests always failing, causing the "mtl_rx_fifo__fill_level_empty"
statistic counter to always be incremented no matter what the fill
level actually is.
Fix this by using FIELD_GET() and remove the unnecessary
MTL_DEBUG_RXFSTS_SHIFT definition as FIELD_GET() will shift according
to the least siginificant set bit in the supplied field mask.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vdtvi-00000002GtP-1Os1@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dwmac4.h duplicates some of the debug register definitions. Remove
the second copy.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vdtvd-00000002GtJ-0qFI@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2026-01-09 (ice, ixgbe, idpf)
For ice:
Grzegorz commonizes firmware loading process across all ice devices.
Michal adjusts default queue allocation to be based on
netif_get_num_default_rss_queues() rather than num_online_cpus().
For ixgbe:
Birger Koblitz adds support for 10G-BX modules.
For idpf:
Sreedevi converts always successful function to return void.
Andy Shevchenko fixes kdocs for missing 'Return:' in idpf_txrx.c file.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
idpf: Fix kernel-doc descriptions to avoid warnings
idpf: update idpf_up_complete() return type to void
ice: use netif_get_num_default_rss_queues()
ixgbe: Add 10G-BX support
ice: unify PHY FW loading status handler for E800 devices
====================
Link: https://patch.msgid.link/20260109210647.3849008-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- ath12k gets an overhaul to support multi-wiphy device
wiphy and pave the way for future device support in the
same driver (rather than splitting to ath13k)
- mac80211 gets some better iteration macros
-----BEGIN PGP SIGNATURE-----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=F1n0
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-01-12' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
First set of changes for the current -next cycle, of note:
- ath12k gets an overhaul to support multi-wiphy device
wiphy and pave the way for future device support in
the same driver (rather than splitting to ath13k)
- mac80211 gets some better iteration macros
* tag 'wireless-next-2026-01-12' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (120 commits)
wifi: mac80211: remove width argument from ieee80211_parse_bitrates
wifi: mac80211_hwsim: remove NAN by default
wifi: mac80211: improve station iteration ergonomics
wifi: mac80211: improve interface iteration ergonomics
wifi: cfg80211: include S1G_NO_PRIMARY flag when sending channel
wifi: mac80211: unexport ieee80211_get_bssid()
wl1251: Replace strncpy with strscpy in wl1251_acx_fw_version
wifi: iwlegacy: 3945-rs: remove redundant pointer check in il3945_rs_tx_status() and il3945_rs_get_rate()
wifi: mac80211: don't send an unused argument to ieee80211_check_combinations
wifi: libertas: fix WARNING in usb_tx_block
wifi: mwifiex: Allocate dev name earlier for interface workqueue name
wifi: wlcore: sdio: Use pm_ptr instead of #ifdef CONFIG_PM
wifi: cfg80211: Fix use_for flag update on BSS refresh
wifi: brcmfmac: rename function that frees vif
wifi: brcmfmac: fix/add kernel-doc comments
wifi: mac80211: Update csa_finalize to use link_id
wifi: cfg80211: add cfg80211_stop_link() for per-link teardown
wifi: ath12k: Skip DP peer creation for scan vdev
wifi: ath12k: move firmware stats request outside of atomic context
wifi: ath12k: add the missing RCU lock in ath12k_dp_tx_free_txbuf()
...
====================
Link: https://patch.msgid.link/20260112185836.378736-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
tools: ynl: cli: improve the help and doc
I had some time on the plane to LPC, so here are improvements
to the --help and --list-attrs handling of YNL CLI which seem
in order given growing use of YNL as a real CLI tool.
====================
Link: https://patch.msgid.link/20260110233142.3921386-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As pointed out during review of the --list-attrs support the GET
ops very often return the same attrs from do and dump. Make the
output more readable by combining the reply information, from:
Do request attributes:
- ifindex: u32
netdev ifindex
Do reply attributes:
- ifindex: u32
netdev ifindex
[ .. other attrs .. ]
Dump reply attributes:
- ifindex: u32
netdev ifindex
[ .. other attrs .. ]
To, after:
Do request attributes:
- ifindex: u32
netdev ifindex
Do and Dump reply attributes:
- ifindex: u32
netdev ifindex
[ .. other attrs .. ]
Tested-by: Gal Pressman <gal@nvidia.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260110233142.3921386-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Event and notify handling is quite different from do / dump
handling. Forcing it into print_mode_attrs() doesn't really
buy us anything as events and notifications do not have requests.
Call print_attr_list() directly. Apart form subjective code
clarity this also removes the word "reply" from the output:
Before:
Event reply attributes:
Now:
Event attributes:
Tested-by: Gal Pressman <gal@nvidia.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260110233142.3921386-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We'll soon add more code to the --doc handling. Factor it out
to avoid making main() too long.
Tested-by: Gal Pressman <gal@nvidia.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260110233142.3921386-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
--list-attrs also provides information about the operation itself.
So --doc seems more appropriate. Add an alias.
Tested-by: Gal Pressman <gal@nvidia.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260110233142.3921386-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Improve the clarity of --help. Reorder, provide some grouping and
add help messages to most of the options.
No functional changes intended.
Tested-by: Gal Pressman <gal@nvidia.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260110233142.3921386-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We already use textwrap when printing "doc" section about an attribute,
but only to indent the text. Switch to using fill() to split and indent
all the lines. While at it indent the text by 2 more spaces, so that it
doesn't align with the name of the attribute.
Before (I'm drawing a "box" at ~60 cols here, in an attempt for clarity):
| - irq-suspend-timeout: uint |
| The timeout, in nanoseconds, of how long to suspend irq|
|processing, if event polling finds events |
After:
| - irq-suspend-timeout: uint |
| The timeout, in nanoseconds, of how long to suspend |
| irq processing, if event polling finds events |
Tested-by: Gal Pressman <gal@nvidia.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260110233142.3921386-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's a little hard to make sense of the output of --list-attrs,
it looks like a wall of text. Sprinkle a little bit of formatting -
make op and attr names bold, and Enum: / Flags: keywords italics.
Tested-by: Gal Pressman <gal@nvidia.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20260110233142.3921386-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Right now, the only way to iterate stations is to declare an
iterator function, possibly data structure to use, and pass all
that to the iteration helper function. This is annoying, and
there's really no inherent need for it.
Add a new for_each_station() macro that does the iteration in
a more ergonomic way. To avoid even more exported functions, do
the old ieee80211_iterate_stations_mtx() as an inline using the
new way, which may also let the compiler optimise it a bit more,
e.g. via inlining the iterator function.
Link: https://patch.msgid.link/20260108143431.d2b641f6f6af.I4470024f7404446052564b15bcf8b3f1ada33655@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Right now, the only way to iterate interfaces is to declare an
iterator function, possibly data structure to use, and pass all
that to the iteration helper function. This is annoying, and
there's really no inherent need for it, except it was easier to
implement with the iflist mutex, but that's not used much now.
Add a new for_each_interface() macro that does the iteration in
a more ergonomic way. To avoid even more exported functions, do
the old ieee80211_iterate_active_interfaces_mtx() as an inline
using the new way, which may also let the compiler optimise it
a bit more, e.g. via inlining the iterator function.
Also provide for_each_active_interface() for the common case of
just iterating active interfaces.
Link: https://patch.msgid.link/20260108143431.f2581e0c381a.Ie387227504c975c109c125b3c57f0bb3fdab2835@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The variable il_sta passed into these two functions cannot be NULL, so
remove the related null checks.
Signed-off-by: Tuo Li <islituo@gmail.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20260111171118.203249-1-islituo@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When ieee80211_check_combinations is called with NULL as the chandef,
the chanmode argument is not relevant. Send a don't care (0) instead.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260111192411.9aa743647b43.I407b3d878d94464ce01e25f16c6e2b687bcd8b5a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Michael Chan says:
====================
bnxt_en: Updates for net-next
This patchset updates the driver with a FW interface update to support
FEC stats histogram and NVRAM defragmentation. Patch #2 adds PTP
cross timestamps [1]. Patch #3 adds FEC histogram stats. Patch #4 adds
NVRAM defragmentation support that prevents FW update failure when NVRAM
is fragmented. Patch #5 improves RSS distribution accuracy when certain
number of rings is in use. The last patch adds ethtool
.get_link_ext_state() support.
====================
Link: https://patch.msgid.link/20260108183521.215610-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Map the link_down_reason from the FW to the ethtool link_ext_state
when it is available. Also log it to the link down dmesg when it is
available. Add 2 new link_ext_state enums to the UAPI:
ETHTOOL_LINK_EXT_STATE_OTP_SPEED_VIOLATION
ETHTOOL_LINK_EXT_STATE_BMC_REQUEST_DOWN
to cover OTP (one-time-programmable) speed restrictions and
BMC (Baseboard management controller) forcing the link down.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260108183521.215610-7-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver currently uses a chip supported RSS indirection table size
just big enough to cover the number of RX rings. Each table with 64
entries requires one HW RSS context. The HW supported table sizes are
64, 128, 256, and 512 entries. Using the smallest table size can cause
unbalanced RSS packet distributions. For example, if the number of
rings is 48, the table size using existing logic will be 64. 32 rings
will have a weight of 1 and 16 rings will have a weight of 2 when
set to default even distribution. This represents a 100% difference in
weights between some of the rings.
Newer FW has increased the RSS indirection table resource. When the
increased resource is detected, use the largest RSS indirection table
size (512 entries) supported by the chip. Using the same example
above, the weights of the 48 rings will be either 10 or 11 when set to
default even distribution. The weight difference is only 10%.
If there are thousands of VFs, there is a possiblity that we may not
be able to allocate this larger RSS indirection table from the FW, so
we add a check to fall back to the legacy scheme.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260108183521.215610-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When updating to a new firmware pkg, the driver checks if the UPDATE
region is big enough for the pkg and if it's not big enough, it
issues an NVM_WRITE cmd to update with the requested size.
This NVM_WRITE cmd can fail indicating fragmented region. Currently
the driver fails the fw update when this happens. We can improve the
situation by defragmenting the region and try the NVM_WRITE cmd
again. This will make firmware update more reliable.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260108183521.215610-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fill in the struct ethtool_fec_hist passed to the bnxt_get_fec_stats()
callback if the FW supports the feature. Bins 0 to 15 inclusive are
available when the feature is supported.
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260108183521.215610-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
.getcrosststamp() helps the applications to obtain a snapshot of
device and host time almost taken at the same time. This function
will report PCIe PTM device and host times to any application using
the ioctl PTP_SYS_OFFSET_PRECISE. The device time from the HW is
48-bit and needs to be converted to 64-bit.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260108183521.215610-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The main changes are the new HWRM_PORT_PHY_FDRSTAT command to collect
FEC histogram bins and the new HWRM_NVM_DEFRAG command to defragment the
NVRAM. There is also a minor name change in struct hwrm_vnic_cfg_input
that requires updating the bnxt_re driver's main.c.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260108183521.215610-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I wasted a couple of hours recently after accidentally adding
a defer() from within a function which itself was called as
part of defer(). This leads to an infinite loop of defer().
Make sure this cannot happen and raise a helpful exception.
I understand that the pair of _ksft_defer_arm() calls may
not be the most Pythonic way to implement this, but it's
easy enough to understand.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260108225257.2684238-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
