Remove redundant 'return;' at the end of void function
ia_css_dvs_statistics_get(). Void functions do not need an explicit
return statement at the end. No other occurrences in this file.
Found with checkpatch.pl --strict.
Signed-off-by: Tomasz Unger <tomasz.unger@yahoo.pl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The OP_std_modadd() adds no value, kill it and update the users to
perform the necessary operations themselves. No intended functional
changes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ethan Tidmore <ethantidmore06@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Update block and inline comments to follow kernel
commenting conventions, fix typos and wording, remove
redundant comments and reformat long comments for clarity
and line length consistency.
Although some comments used the /** ... */ style, they are not
kernel-doc comments and are converted to normal comment style.
No functional changes are intended.
Signed-off-by: Hamdan Khan <hamdankhan212@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Fix checkpatch.pl errors:
ERROR: that open brace { should be on the previous line
Signed-off-by: Matt Wardle <matt@mattwardle.net>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Fix parameter indentation for functions and move opening braces onto new
line. Fix checkpatch.pl errors:
ERROR: open brace '{' following function definitions go on the next line
Signed-off-by: Matt Wardle <matt@mattwardle.net>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Fix checkpatch.pl warnings:
WARNING: braces {} are not necessary for single statement blocks
WARNING: braces {} are not necessary for any arm of this statement
Signed-off-by: Matt Wardle <matt@mattwardle.net>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Auditing calls to sprintf(). This code is fine because we are
copying 9 characters into a 52 character buffer. But it would
be cleaner to use strscpy() instead. Additionally, the 2-argument
version of strscpy() checks at compile time that dst is an array,
not just a pointer.
This is the only sprintf() call in the whole driver.
Signed-off-by: Tomasz Unger <tomasz.unger@yahoo.pl>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
While touching all these arrays, unify usage of whitespace and commas.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
atmel-isc has been in staging pending removal since 2022.
Hence remove now.
Signed-off-by: Eugen Hristev <ehristev@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
si476x_radio_probe() registers radio->v4l2dev before allocating the V4L2
controls and before registering the video device. If any of those later
steps fails, probe returns through the exit label after freeing only the
control handler.
A failed probe does not call si476x_radio_remove(), so the
v4l2_device_unregister() there is not reached. This leaves the parent
device reference taken by v4l2_device_register() behind on the error path.
Unregister the V4L2 device in the probe error path after freeing the
controls.
Fixes: b879a9c2a7 ("[media] v4l2: Add a V4L2 driver for SI476X MFD")
Cc: stable@vger.kernel.org
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
pwc_isoc_init() submits its isochronous URBs with
usb_submit_urb(.., GFP_KERNEL) in a loop. After the first URB is
submitted, its completion handler pwc_isoc_handler() can run on another
CPU before the loop finishes:
start_streaming()
pwc_isoc_init()
usb_submit_urb(urbs[0], GFP_KERNEL)
pwc_isoc_handler(urbs[0])
pdev->fill_buf =
pwc_get_next_fill_buf(pdev)
usb_submit_urb(urbs[i>0], ..) -> fails
pwc_isoc_cleanup(pdev) /* kills URBs */
return ret;
pwc_cleanup_queued_bufs(pdev, VB2_BUF_STATE_QUEUED)
pwc_get_next_fill_buf() detaches a buffer from pdev->queued_bufs and
stores it in pdev->fill_buf. The error path in start_streaming() only
drains pdev->queued_bufs, so the buffer parked in pdev->fill_buf is
leaked. vb2_start_streaming() then triggers
WARN_ON(owned_by_drv_count).
stop_streaming() already handles this since commit 80b0963e16
("[media] pwc: fix WARN_ON"), which added the fill_buf drain in the
teardown path but not in the start_streaming() error path. Mirror that
handling on failure so start_streaming() returns with no buffer owned
by the driver.
Issue identified by automated review of the INV-003 series at
https://sashiko.dev/
Fixes: 885fe18f55 ("[media] pwc: Replace private buffer management code with videobuf2")
Cc: stable@vger.kernel.org
Signed-off-by: Valery Borovsky <vebohr@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
With DRM_AMDGPU=m and DRM_AMD_ISP=y, it is possible to configura
VIDEO_AMD_ISP4_CAPTURE as built-in, but that fails to link:
aarch64-linux-ld: drivers/media/platform/amd/isp4/isp4_interface.o: in function `isp4if_gpu_mem_alloc.isra.0':
isp4_interface.c:(.text+0x1d0): undefined reference to `isp_kernel_buffer_alloc'
aarch64-linux-ld: drivers/media/platform/amd/isp4/isp4_interface.o: in function `isp4if_dealloc_fw_gpumem':
isp4_interface.c:(.text+0x26c): undefined reference to `isp_kernel_buffer_free'
Add a dependency on the tristate DRM_AMDGPU symbol in addition to
the boolean DRM_AMD_ISP=y, so this can only be built-in if
the ISP driver is also linked into the kernel itself.
Fixes: 9a54c28563 ("media: platform: amd: Introduce amd isp4 capture driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bin Du <Bin.Du@amd.com>
Tested-by: Bin Du <Bin.Du@amd.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Newer Smatch snapshots no longer report the false positive around
isp4if_send_fw_cmd(), so the extra list reinitialization before kfree()
is no longer needed.
Drop the stale list reinit and keep the cleanup path simpler.
Signed-off-by: Bin Du <Bin.Du@amd.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The OV13B10 sensor driver currently handles a single regulator called
avdd, however the sensor can be supplied by up to three regulators.
Update the driver to handle all of them together using the regulator
bulk API.
Signed-off-by: Arun T <arun.t@intel.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The Intel NVL platform uses IPU8 powered by a TPS68470 PMIC,
requiring board data to configure the GPIOs and regulators for
proper camera sensor operation.
Signed-off-by: Arun T <arun.t@intel.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Rename the MSI-specific daisy-chain GPIO properties and software node
to generic names so they can be reused by other platforms that also
require daisy-chain GPIO configuration for TPS68470.
Signed-off-by: Arun T <arun.t@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Drop comments about CEC 2.0 from cec-funcs.h.
In cec.h clearly comment messages that are CEC 2.0 specific
as such. Also rename references to HDMI 2.0 to CEC 2.0.
The <Request/Report Current Latency> messages were marked
as CEC 2.0 only. That is wrong, these messages are explicitly
allowed for any CEC version.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Link: https://patch.msgid.link/098789ee233f777d5ad87a72f09a997373c98d25.1779115235.git.hverkuil+cisco@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Message-ID: <098789ee233f777d5ad87a72f09a997373c98d25.1779115235.git.hverkuil+cisco@kernel.org>
Add support for the new Latency Indication Protocol feature.
This adds the opcodes and the wrapper functions.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Link: https://patch.msgid.link/8dac7c99b7eab4fcc11d76d50dd08fb4448672f4.1779115235.git.hverkuil+cisco@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Message-ID: <8dac7c99b7eab4fcc11d76d50dd08fb4448672f4.1779115235.git.hverkuil+cisco@kernel.org>
When mali_c55_media_frameworks_init() fails, the goto target jumps to
err_free_context_registers, skipping pm_runtime_disable() despite
pm_runtime having already been enabled earlier in the function.
Fix this by adding an err_pm_runtime_disable label and redirecting the
frameworks init failure to it, so pm_runtime is properly unwound on
that error path. The runtime PM status is also set back to suspended
before disabling, to undo the pm_runtime_set_active() from probe.
Cc: stable@vger.kernel.org
Fixes: d5f281f3dd ("media: mali-c55: Add Mali-C55 ISP driver")
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Mali C55 driver doesn't depend on PM. For this reason, if pm_runtime
is not compiled in it is required to manually power-off the peripheral
during the driver's remove() handler.
Also pm_runtime_enable() is called during probe but mali_c55_remove()
never calls pm_runtime_disable(), leaving the device's runtime PM state
enabled after the driver is unbound.
Manually power-off the peripheral in remove() if the peripheral has not
been suspended using runtime_pm and disable runtime pm.
Cc: stable@vger.kernel.org
Fixes: d5f281f3dd ("media: mali-c55: Add Mali-C55 ISP driver")
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
mali_c55_probe() calls of_reserved_mem_device_init() to associate
reserved memory regions with the device. This function allocates a
struct rmem_assigned_device and adds it to a global linked list, which
must be explicitly released via of_reserved_mem_device_release() — there
is no devm variant of this API.
However, neither the probe error paths nor mali_c55_remove() called
of_reserved_mem_device_release(). Any probe failure after the
of_reserved_mem_device_init() call, as well as every normal device
removal, leaked the reserved memory association on the global list.
Fix this by adding an err_release_mem label at the end of the probe
error chain and calling of_reserved_mem_device_release() in
mali_c55_remove(). The remove teardown order is also corrected to call
mali_c55_media_frameworks_deinit() before kfree(), mirroring the probe
init order in reverse.
Cc: stable@vger.kernel.org
Fixes: d5f281f3dd ("media: mali-c55: Add Mali-C55 ISP driver")
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The media_pad_remote_pad_unique() function returns either a valid
pointer or an ERR_PTR() on failure (-ENOTUNIQ if multiple links are
enabled, -ENOLINK if no connected pad is found). The return value
was assigned directly to isp->remote_src and dereferenced in the
next line without checking for errors, which could lead to an
ERR_PTR dereference.
Add proper error checking with IS_ERR() before dereferencing the
pointer. Also set isp->remote_src to NULL on error to maintain
consistency with other error paths in the function.
Cc: stable@vger.kernel.org
Fixes: d5f281f3dd ("media: mali-c55: Add Mali-C55 ISP driver")
Signed-off-by: Alper Ak <alperyasinak1@gmail.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The platform_get_irq_byname() function already prints an error message
internally upon failure using dev_err_probe(). Therefore, the explicit
dev_err() is redundant and results in duplicate error logs.
Remove the redundant dev_err() call to clean up the error path.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The subdevices registered by the Mali-C55 driver do not have their
'struct device *dev' member initialized. This is visibile when looking
at debug message, as in example:
"(NULL device *): collect_streams: sub-device 'mali-c55 tpg' does not
support streams"
Fix this by initializing the *dev field for each subdevice registered
by the Mali-C55 driver.
Signed-off-by: jempty.liang <imntjempty@163.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The rzv2h-ivc driver fails to handle back-2-back streaming sessions that
do not go through a peripheral reset. As the driver uses an autosuspend
delay of 2 seconds, it is quite possible that two consecutive streaming
sessions won't go through a suspend/resume sequence.
If the peripheral is not reset the second streaming session hangs and no
frames are delivered to the ISP.
This is because the stop_streaming() procedure implemented in the driver
doesn't match what's prescribed by the chip datasheet:
1) The chip manual suggests to poll the RZV2H_IVC_FM_INT_STAT_STPEND bit
of RZV2H_IVC_REG_FM_INT_STA instead of polling on RZV2H_IVC_REG_FM_STOP
and prescribes to clear the bit after polling has completed
2) More importantly: the RZV2H_IVC_REG_FM_STOP_FSTOP bit has to be set
on RZV2H_IVC_REG_FM_STOP -only- if a frame transfer to the ISP is in
progress. Setting the RZV2H_IVC_REG_FM_STOP_FSTOP bit when no frame is
being transferred causes the polling routine to timeout and the next
streaming session fails to start
As a frame transfer of an image in 1920x1080@10bi takes 5 milliseconds
at most, it is quite possible that the frame transfer completion interrupt
races with the stop procedure.
Instead of forcing a frame transfer abort, simply wait for the
in-progress transfer to complete by polling the ivc->vvalid_ifp status
variable in an hand-rolled loop that allows to inspect the variable
while holding the spinlock, to allow the irq handler to complete the
current buffer.
With this change, streaming back-2-back without suspending the
peripheral works successfully.
Cc: stable@vger.kernel.org
Fixes: f0b3984d82 ("media: platform: Add Renesas Input Video Control block driver")
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The rzg2l_cru_irq() irq handler uses a local variable to store the
handler return value.
Simplify it by using IRQ_NONE and IRQ_HANDLED.
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Using dev_dbg() in irq handlers to debug per-frame events is marginally
useful and possibly not the best idea, as using printk-based helpers
introduce latencies that impact the drivers operations.
If any tracing/debugging has to be performed around frame events
in interrupt handlers, the tracing subsystem offers better alternatives.
Drop dev_dgb() calls from the CRU interrupt handlers.
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The cru driver uses a 'state' variable for debugging purpose in the
interrupt handler. The state is used to detect invalid usage conditions
that are not meant to happen unless the driver has a bug in handling the
stop and start conditions.
Remove the state variable which seems to be a debugging leftover.
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The current implementation of rzg2l_cru_fill_hw_slot() results in the
artificial loss of frames. At present whenever a frame-complete IRQ
is received the driver fills the hardware slot that was just written
to with the address of the next buffer in the driver's queue. If the
queue is empty, that hardware slot's address is set to the address of
the scratch buffer to enable the capture loop to keep running. There
is a minimum of a two-frame delay before that slot will be written to
however, and in the intervening period userspace may queue more
buffers which could be used.
To resolve the issue rework rzg2l_cru_fill_hw_slot() so that it
iteratively fills all slots from the queue which currently do not
have a buffer assigned, until the queue is empty. The scratch
buffer is only resorted to in the event that the queue is empty and
the next slot that will be written to does not already have a buffer
assigned.
Signed-off-by: Daniel Scally <dan.scally+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Buffers are programmed into slots in queueing order.
When returning pending buffers we can't simply start from the first slot
but we should actually iterate slots starting from the one is use. The
rzg3e_cru_irq() handler already uses 'active_slot', make rzg2l_cru_irq()
use it as well to know where to start iterating from.
As the pattern of iterating over slots in order will be used for slots
programming in the next patches, provide an helper macro to do that.
While at it, rename return_unused_buffers() to rzg2l_cru_return_buffers().
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The CRU cycles over the hardware slots where the destination address for
the next frame has to be programmed.
The RZ/G2L version of the IP has a register that tells which is the
last used slot by the hardware but, unfortunately, such register is not
available on RZ/G3E and RZ/V2H(P).
The driver currently compares the value of the AMnMADRSL/H register
which report "the memory address which the current video data was
written to" and compares it with the address programmed in the slots.
This heuristic requires a bit of book keeping and proper locking. As the
driver handles the FrameEnd interrupt, it's way easier to keep track
of the slot that has been used by ourselves with a driver variable.
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Split the locking between a spinlock dedicated to protect the hardware
slots programming (hw_lock) and one lock (qlock) to protect the queue of
buffers submitted by userspace.
Do not rework the locking strategy yet but start simply by splitting the
locking in two.
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The CRU driver uses a single spinlock to protect the buffers queue and
the hardware operations.
This single spinlock is held for the whole duration of the interrupt
handler, causing all other driver's operations to freeze.
Under heavy system stress conditions with userspace not providing
buffers fast enough, this causes loss of frames.
Prepare to re-work the driver locking by introducing (but not using yet)
a new spinlock to protect the hardware registers programming.
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
A function documented as "need to hold qlock before calling" actually
takes the lock itself.
Drop the comment and prepare to replace it with proper annotations where
appropriate.
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The return_unused_buffers() and rzg2l_cru_buffer_queue() functions
are never called from an interrupt context, hence they do not need to
use the irqsave version of the spinlock primitives.
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The start/stop streaming routines do not need to lock the whole function
body against possible concurrent accesses to the CRU buffers or hardware
registers.
The stop function starts by disabling interrupts, and only this portion
needs to be protected not to race against a possible IRQ.
Once interrupts are disabled, nothing in the video device driver can race
and once the peripheral has been disabled we can release all pending
buffers.
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The irq handler uses a scoped_guard() that covers the whole function
body.
Replace it with a more appropriate guard() and reduce the indentation.
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Use more modern lock guard constructs to express the locking sequences
in the rzg2l driver. Also include spinlock.h and mutex.h that were
previously missing.
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
On RZ/G3E the CRU driver relies on the frame end interrupt to detect the
completion of an active frame transfer when stopping DMA.
Update the driver to enable only frame end interrupts (CRUnIE2_FExE),
dropping the usage of the frame start interrupts, which is not required
for this operations flow.
Fix the interrupt status handling in the DMA stopping state by checking
the correct frame end status bits (FExS) instead of the frame start one
(FSxS). Add a dedicated CRUnINTS2_FExS() macro to reflect the actual
register bit layout and drop the now unused CRUnIE2_FSxE() and
CRUnINTS2_FSxS() macros.
This ensures that DMA stopping is triggered by the intended frame end
events and avoids incorrect interrupt handling.
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
When the CRU is configured to use ICnSVC for virtual channel mapping,
as on the RZ/{G3E, V2H/P} SoC, the ICnMC register must not be
programmed.
Return early after setting up ICnSVC to avoid overriding the ICnMC
register, which is not applicable in this mode.
This prevents unintended register programming when ICnSVC is enabled.
Cc: stable@vger.kernel.org
Fixes: 3c5ca0a48b ("media: rzg2l-cru: Drop function pointer to configure CSI")
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
[Rework to not break image format programming]
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add Vol+/Vol-/Mute panel button mappings for iMON VFD HID OEM v1.2.
This version differs in the codes that generate the
KEY_VOLUMEUP, KEY_VOLUMEDOWN and KEY_MUTE events.
Signed-off-by: Alessandro Baldi <baldovic@virgilio.it>
Signed-off-by: Sean Young <sean@mess.org>
The LM3559 is very similar to the LM3560, but it operates at much lower
currents. This may result in incorrect current selection if LM3560 ranges
are applied to the LM3559. Implement driver data matching to use
device-specific current configurations.
Since the driver no longer supports platform data and device configuration
is performed more granularly, move the remaining enums from the header
into the driver file and remove the header.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add support for power management features to better control the LM3560
within the media framework. To achieve the desired PM support, the HWEN
GPIO and VIN power supply were added and configured into power on/off
sequences. Added PM operations along with the PM configuration setup.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Since there are no users of this driver via platform data, remove the
platform data support and switch to using Device Tree bindings.
Converting to Device Tree assumes dynamic and independent registration of
LEDs. To monitor the configured LEDs, a bitmap has been added. This makes
LED cleanup more robust and less context dependent.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Pass the device's own mutex lock to the control handler so that the media
framework can handle control access instead of managing it manually. The
lock must be common to both sub-devices since they share same hardware,
so the individual sub-device locks will not work here.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
