Introduce the `dphy_late_init` callback in `rzg2l_mipi_dsi_hw_info` to
allow additional D-PHY register configurations after enabling data and
clock lanes. This is required for the RZ/V2H(P) SoC but not for the
RZ/G2L SoC.
Modify `rzg2l_mipi_dsi_startup()` to invoke `dphy_late_init` if defined,
ensuring SoC-specific initialization is performed only when necessary.
This change prepares for RZ/V2H(P) SoC support while maintaining
compatibility with existing platforms.
Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250609225630.502888-9-prabhakar.mahadev-lad.rj@bp.renesas.com
Introduce the `RZ_MIPI_DSI_FEATURE_16BPP` flag in `rzg2l_mipi_dsi_hw_info`
to indicate support for 16BPP pixel formats. The RZ/V2H(P) SoC supports
16BPP, whereas this feature is missing on the RZ/G2L SoC.
Update the `mipi_dsi_host_attach()` function to check this flag before
allowing 16BPP formats. If the SoC does not support 16BPP, return an error
to prevent incorrect format selection.
This change enables finer-grained format support control for different
SoC variants.
Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250609225630.502888-8-prabhakar.mahadev-lad.rj@bp.renesas.com
Pass the HSFREQ in milli-Hz to the `dphy_init()` callback to improve
precision, especially for the RZ/V2H(P) SoC, where PLL dividers require
high accuracy.
These changes prepare the driver for upcoming RZ/V2H(P) SoC support.
Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250609225630.502888-7-prabhakar.mahadev-lad.rj@bp.renesas.com
In preparation for adding support for the Renesas RZ/V2H(P) SoC, make the
"rst" reset control optional in the MIPI DSI driver. The RZ/V2H(P) SoC
does not provide this reset line, and attempting to acquire it using the
mandatory API causes probe failure.
Switching to devm_reset_control_get_optional_exclusive() ensures
compatibility with both SoCs that provide this reset line and those that
do not, such as RZ/V2H(P).
Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250609225630.502888-6-prabhakar.mahadev-lad.rj@bp.renesas.com
n preparation for adding support for the Renesas RZ/V2H(P) SoC, this patch
introduces a mechanism to pass SoC-specific information via OF data in the
DSI driver. This enables the driver to adapt dynamically to various
SoC-specific requirements without hardcoding configurations.
The MIPI DSI interface on the RZ/V2H(P) SoC is nearly identical to the one
on the RZ/G2L SoC. While the LINK registers are shared between the two
SoCs, the D-PHY registers differ. Also the VCLK range differs on both these
SoCs. To accommodate these differences `struct rzg2l_mipi_dsi_hw_info` is
introduced and as now passed as OF data.
These changes lay the groundwork for the upcoming RZ/V2H(P) SoC support by
allowing SoC-specific data to be passed through OF.
Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250609225630.502888-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Update the RZ/G2L MIPI DSI driver to calculate HSFREQ using the actual
VCLK rate instead of the mode clock. The relationship between HSCLK and
VCLK is:
vclk * bpp <= hsclk * 8 * lanes
Retrieve the VCLK rate using `clk_get_rate(dsi->vclk)`, ensuring that
HSFREQ accurately reflects the clock rate set in hardware, leading to
better precision in data transmission.
Additionally, use `DIV_ROUND_CLOSEST_ULL` for a more precise division
when computing `hsfreq`. Also, update unit conversions to use correct
scaling factors for better clarity and correctness.
Since `clk_get_rate()` returns the clock rate in Hz, update the HSFREQ
threshold comparisons to use Hz instead of kHz to ensure correct behavior.
Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250609225630.502888-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Simplify the high-speed clock frequency (HSFREQ) calculation by removing
the redundant multiplication and division by 8. The updated equation:
hsfreq = mode->clock * bpp / dsi->lanes;
produces the same result while improving readability and clarity.
Additionally, update the comment to clarify the relationship between HS
clock bit frequency, HS byte clock frequency, and HSFREQ.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250609225630.502888-3-prabhakar.mahadev-lad.rj@bp.renesas.com
The VCLK range for Renesas RZ/G2L SoC is 5.803 MHz to 148.5 MHz. Add a
minimum clock check in the mode_valid callback to ensure that the clock
value does not fall below the valid range.
Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250609225630.502888-2-prabhakar.mahadev-lad.rj@bp.renesas.com
The thread sanitizer makes the stack usage explode from extra variable
spills in dispc_runtime_resume:
drivers/gpu/drm/omapdrm/dss/dispc.c:4735:27: error: stack frame size (1824) exceeds limit (1280) in 'dispc_runtime_resume' [-Werror,-Wframe-larger-than]
I could not figure out what exactly is going on here, but I see that
whenever dispc_restore_context() is not inlined, that function
and its caller shrink below 900 bytes combined of stack usage.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250610092737.2641862-1-arnd@kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
This was added by Sima +10 years ago as a solution to avoid exporting
multiple dma-bufs for the same GEM object. I tried to remove it before,
but wasn't 100% sure about all the side effects.
Now Thomas recent modified drm_gem_prime_handle_to_dmabuf() which makes
it obvious that this is a superflous step. We try to look up the DMA-buf
by handle handle and if that fails for some reason (must likely because
the handle is a duplicate) the code just use the DMA-buf from the GEM
object.
Just using the DMA-buf from the GEM object in the first place has the
same effect as far as I can see.
Some more history from Sima:
In d0b2c5334f ("drm/prime: Always add exported buffers to the handle
cache") I added this additional lookup. It wasn't part of the bugfix,
but back then the handle list was just a linked list and you could do
lookups in either direction. And I guess I felt like doing a quick lookup
before we grab the next lock makes sense. Premature optimization, I'm
confessing to the crime guilty as charged :-/
Then Chris Wilson in 077675c1e8 ("drm: Convert prime dma-buf <-> handle
to rbtree") and added 2 rb trees to support both directions. At that point
that handle2buf lookup really didn't make much sense anymore, but we just
kept it and it's been in the tree confusing people ever since.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250604113234.2520-1-christian.koenig@amd.com
Add client id to the drm_file_error api, client id
is a unique id for each drm fd and is quite useful
for debugging.
v2: Swapped client id and client name order [Chrisitan]
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250530062929.1954784-1-sunil.khatri@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
For the evict fail case, the evict error should be returned.
v2: Consider ENOENT case.
v3: Abort directly when the eviction failed for some reason (except for -ENOENT)
and not wait for the move to finish
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250603091154.3472646-1-Emily.Deng@amd.com
If the panel is enabled at probe, and we take over the hardware state,
the drm_panel prepared state will be out of sync. We'll need to notify
drm_panel framework about the state at probe, so it can in turn notify
the panel followers.
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Tested-by: Lee Shawn C <shawn.c.lee@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/a33e4fe5e9970aed9c4aef8c426c00a189149c32.1749199013.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Allocate and register a drm_panel so that drm_panel_followers can find
the panel. Pass the drm_connector::kdev device to drm_panel allocation
for matching. That's only available after drm_sysfs_connector_add(), so
we need to postpone the drm_panel allocation until .late_register()
hook.
The drm_panel framework is moving towards devm_drm_panel_alloc(). It
requires a wrapper struct, and struct intel_panel would be the natural
candidate. However, we can't postpone its allocation until
.late_register(), so we have to use __devm_drm_panel_alloc() directly
for now.
Call the drm_panel_prepare() and drm_panel_unprepare() functions for
ICL+ DSI, so that followers get notified of the panel power state
changes. This can later be expanded to VLV+ DSI and eDP.
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Tested-by: Lee Shawn C <shawn.c.lee@intel.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/13d15c1414e65ffb21944d66e2820befdab54e98.1749199013.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add panel register/unregister functions, and handle backlight
register/unregister from there. This is in preparation for adding more
panel specific register/unregister functionality.
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Tested-by: Lee Shawn C <shawn.c.lee@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@gmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/b737d4bc8b91df630cd4db4648f3a3571989cfd8.1749199013.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Use firmware node based lookups for panel followers, to make the code
independent of OF and device tree, and make it work also for ACPI with
an appropriate _DSD.
ASL example:
Package (0x02)
{
"panel", \_SB.PCI0.GFX0.LCD0
}
v2:
- Update comments (Doug, Arun)
- s/IS_ERR_OR_NULL/IS_ERR/ (Doug)
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Jessica Zhang <jessica.zhang@oss.qualcomm.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Tested-by: Lee Shawn C <shawn.c.lee@intel.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250610094132.3240567-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Map DRM FourCC codes to pixel descriptions with an internal struct
type. Avoid simplefb's struct simplefb_format, which is for parsing
"simple-framebuffer" DT nodes. Drop the unsupported formats with
alpha channel from the list.
The HDLCD drivers uses struct simplefb_format and its default
initializer SIMPLEFB_FORMATS to map DRM_FORMAT_ constants to pixel
descriptions. The simplefb helpers are for parsing "simple-framebuffer"
DT nodes and should be avoided in other context. Therefore replace it
in hdlcd with a custom struct type and pixel descriptions from
PIXEL_FORMAT_ constants.
This change also removes including <linux/platform_data/simplefb.h>,
which includes several unrelated headers, such as <linux/fb.h>.
v2:
- drop unsupported alpha formats (Liviu)
- keep original sorting of formats (Javier)
- use anonymous type for supported_formats
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/r/20250610073027.322944-1-tzimmermann@suse.de
Add configuration for the 7" Raspberry Pi 720x1280 DSI panel
based on ili9881.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250608142908.54121-3-marek.vasut+renesas@mailbox.org
Not all panels use all 4 data lanes, so allow configuration based
on the compatible string.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250608142908.54121-2-marek.vasut+renesas@mailbox.org
Document the 7" Raspberry Pi 720x1280 DSI panel based on ili9881.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250608142908.54121-1-marek.vasut+renesas@mailbox.org
The Winstar wf40eswaa6mnn0 panel is a square 4.0" TFT LCD with a
resolution of 480x480 pixels.
Signed-off-by: Stefan Eichenberger <eichest@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250606114644.105371-3-eichest@gmail.com
The Winstar wf40eswaa6mnn0 panel is a square 4.0" TFT LCD with a
resolution of 480x480 pixels.
This panel is driven by the Sitronix ST7701 controller and uses a MIPI
DSI interface. The settings are based on the panel's datasheet and the
init sequence provided by Winstar.
It was tested on a Verdin iMX8MP from Toradex with a Carrier Board
providing a MIPI DSI interface.
Signed-off-by: Stefan Eichenberger <eichest@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250606114644.105371-2-eichest@gmail.com
Add support for another variant of the rm69299 panel. This panel is
1080x2160 and is found in the shift-axolotl (SHIFT6mq).
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
[narmstrong: moved to panel_desc]
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250509-topic-misc-shift6-panel-v2-6-c2c2d52abd51@linaro.org
Add support for sending MIPI DSI command packets from the host to a
peripheral. This is required for panels that need configuration before
they accept video data.
Also for long reads to work properly, set DCS maximum return packet size
to the value of the DMA buffer size.
Based on Renesas Linux kernel v5.10 repos [1].
Link: https://github.com/renesas-rz/rz_linux-cip.git
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Tested-by: Chris Brandt <Chris.Brandt@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250604145306.1170676-2-hugo@hugovil.com
The renaming to the timer_*() namespace was delayed due massive conflicts
against Linux-next. Now that everything is upstream finish the conversion.
-----BEGIN PGP SIGNATURE-----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=jJaU
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanup from Thomas Gleixner:
"The delayed from_timer() API cleanup:
The renaming to the timer_*() namespace was delayed due massive
conflicts against Linux-next. Now that everything is upstream finish
the conversion"
* tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename from_timer() to timer_container_of()
- Cure IO bitmap inconsistencies
A failed fork cleans up all resources of the newly created thread via
exit_thread(). exit_thread() invokes io_bitmap_exit() which does the IO
bitmap cleanups, which unfortunately assume that the cleanup is related
to the current task, which is obviously bogus. Make it work correctly
- A lockdep fix in the resctrl code removed the clearing of the command
buffer in two places, which keeps stale error messages around. Bring
them back.
- Remove unused trace events
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmhFO0MTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoZYqEADAB+3WsgT9WZlGfksOgcL05uD0sGKP
mrGkrVuyGLQaMK+Vv7F3Vll0khe3nMJ1DzOOdmejerzEi2yb7CaZHIT1esujVHAk
kieR/D7t5zUvPislBSUxgsmNjqwoCDAwe5vKTSM0p20T7CWkenAzCcA4cUFQfGWo
2TqJWLDgdlvOk6qnaUTm0tzGjeYD9PegoUEyz5wgrf+YjsiKIWJLRbDMb3tXsOpy
La2vh2APV6Tt/PMalQiedQdi3VAf5yD+3HpvlXJ6b1BhJy3iPO6iMQPp1kwsKFjm
dzFT0IqM7lOERjMbhhnntLWe9z0vyezwIEj6dPlCf6MG8lTJ3io0bWJ2LwQEzt3q
RkFJO7wc7QqJoIGsZARGREA99Zkh6/qTh8QovbjpHWoQBrMIZ9mxw9gJ6QR/vjNa
dVhIEi4mOBNw+bq4BmYExC8j60qpGBrEi+lJrGWZoEBWHqhUY3I38DU1oH97mn/s
qL1iZo1TOGyxGuHIN79fKWduEpY+tyvhLxB2zW5m9+B26XRXZBec1lZ+qfIpPo/f
ZuWIbNYsKKPgpHZLSb21RJ/ost+sTr4iEb3XuguP+YAxfjOVJR7CAhsfWRTDNhPS
wGiyPAGmdbQrx/2Wn4vZnznOm/OH4aQX5cxbNR8TPknHJzYRmIY3VTDjDr8Xqxx+
R4/IRQOmcJ0Q/Q==
=x7j0
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A small set of x86 fixes:
- Cure IO bitmap inconsistencies
A failed fork cleans up all resources of the newly created thread
via exit_thread(). exit_thread() invokes io_bitmap_exit() which
does the IO bitmap cleanups, which unfortunately assume that the
cleanup is related to the current task, which is obviously bogus.
Make it work correctly
- A lockdep fix in the resctrl code removed the clearing of the
command buffer in two places, which keeps stale error messages
around. Bring them back.
- Remove unused trace events"
* tag 'x86-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Restore the rdt_last_cmd_clear() calls after acquiring rdtgroup_mutex
x86/iopl: Cure TIF_IO_BITMAP inconsistencies
x86/fpu: Remove unused trace events
Add initial DMR support, which required smarter RAPL probe
Fix AMD MSR RAPL energy reporting
Add RAPL power limit configuration output
Minor fixes
Signed-off-by: Len Brown <len.brown@intel.com>
For the RAPL package energy status counter, Intel and AMD share the same
perf_subsys and perf_name, but with different MSR addresses.
Both rapl_counter_arch_infos[0] and rapl_counter_arch_infos[1] are
introduced to describe this counter for different Vendors.
As a result, the perf counter is probed twice, and causes a failure in
in get_rapl_counters() because expected_read_size and actual_read_size
don't match.
Fix the problem by skipping the already probed counter.
Note, this is not a perfect fix. For example, if different
vendors/platforms use the same MSR value for different purpose, the code
can be fooled when it probes a rapl_counter_arch_infos[] entry that does
not belong to the running Vendor/Platform.
In a long run, better to put rapl_counter_arch_infos[] into the
platform_features so that this becomes Vendor/Platform specific.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
platform_features->rapl_msrs describes the RAPL MSRs supported. While
RAPL Perf counters can be exposed from different kernel backend drivers,
e.g. RAPL MSR I/F driver, or RAPL TPMI I/F driver.
Thus, turbostat should first blindly probe all the available RAPL Perf
counters, and falls back to the RAPL MSR counters if they are listed in
platform_features->rapl_msrs.
With this, platforms that don't have RAPL MSRs can clear the
platform_features->rapl_msrs bits and use RAPL Perf counters only.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Increase the code readability by moving the no_perf/no_msr flag and the
cai->perf_name/cai->msr sanity checks into the counter probe functions.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
probe_rapl_msr() is reused for probing RAPL MSR counters, cstate MSR
counters and MPERF/APERF/SMI MSR counters, thus its name is misleading.
Similar to add_perf_counter(), introduce add_msr_counter() to probe a
counter via MSR. Introduce wrapper function add_rapl_msr_counter() at
the same time to add extra check for Zero return value for specified
RAPL counters.
No functional change intended.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
As the only caller of add_msr_perf_counter_(), add_msr_perf_counter()
just gives extra debug output on top. There is no need to keep both
functions.
Remove add_msr_perf_counter_() and move all the logic to
add_msr_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
As the only caller of add_cstate_perf_counter_(),
add_cstate_perf_counter() just gives extra debug output on top. There is
no need to keep both functions.
Remove add_cstate_perf_counter_() and move all the logic to
add_cstate_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
As the only caller of add_rapl_perf_counter_(), add_rapl_perf_counter()
just gives extra debug output on top. There is no need to keep both
functions.
Remove add_rapl_perf_counter_() and move all the logic to
add_rapl_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Quit early for unsupported RAPL counters.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
rapl_joules bit should always be checked even if
platform_features->rapl_msrs is not set or no_msr flag is used.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 05a2f07db8 ("tools/power turbostat: read RAPL counters via
perf") that adds support to read RAPL counters via perf defines the
notion of a RAPL domain_id which is set to physical_core_id on
platforms which support per_core_rapl counters (Eg: AMD processors
Family 17h onwards) and is set to the physical_package_id on all the
other platforms.
However, the physical_core_id is only unique within a package and on
platforms with multiple packages more than one core can have the same
physical_core_id and thus the same domain_id. (For eg, the first cores
of each package have the physical_core_id = 0). This results in all
these cores with the same physical_core_id using the same entry in the
rapl_counter_info_perdomain[]. Since rapl_perf_init() skips the
perf-initialization for cores whose domain_ids have already been
visited, cores that have the same physical_core_id always read the
perf file corresponding to the physical_core_id of the first package
and thus the package-energy is incorrectly reported to be the same
value for different packages.
Note: This issue only arises when RAPL counters are read via perf and
not when they are read via MSRs since in the latter case the MSRs are
read separately on each core.
Fix this issue by associating each CPU with rapl_core_id which is
unique across all the packages in the system.
Fixes: 05a2f07db8 ("tools/power turbostat: read RAPL counters via perf")
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Fix typo in the currently unused RAPL_GFX_ALL macro definition.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
