- Require CAP_SYS_ADMIN to write to sysfs 'resourceN_resize' attributes
(Krzysztof Wilczyński)
- Convert PCI resource files to static attributes to avoid races that cause
'duplicate filename' warnings and boot panics (Krzysztof Wilczyński)
- Remove pci_create_sysfs_dev_files() and pci_remove_sysfs_dev_files(),
which are obsolete after converting to static attributes (Krzysztof
Wilczyński)
- Add security_locked_down(LOCKDOWN_PCI_ACCESS) to alpha PCI resource mmap
path to match the generic path (Krzysztof Wilczyński)
- Convert sysfs 'legacy_io' and 'legacy_mem' to static attributes
(Krzysztof Wilczyński)
- Remove pci_create_legacy_files() and pci_sysfs_init(), which are obsolete
after converting to static attributes (Krzysztof Wilczyński)
- Expose sysfs 'resourceN_resize' attributes only on platforms with PCI
mmap (Krzysztof Wilczyński)
- Use kstrtobool() to parse the 'rom' attribute input to avoid the
unexpected behavior of enabling the ROM when writing '0' with no trailing
newline (Krzysztof Wilczyński)
* pci/sysfs:
PCI/sysfs: Use kstrtobool() to parse the ROM attribute input
PCI/sysfs: Limit BAR resize attribute scope to platforms with PCI mmap
PCI/sysfs: Remove pci_create_legacy_files() and pci_sysfs_init()
PCI/sysfs: Convert legacy I/O and memory attributes to static definitions
PCI/sysfs: Add __weak pci_legacy_has_sparse() helper
alpha/PCI: Compute legacy size in pci_mmap_legacy_page_range()
PCI: Add macros for legacy I/O and memory address space sizes
PCI/sysfs: Remove pci_{create,remove}_sysfs_dev_files()
alpha/PCI: Convert resource files to static attributes
alpha/PCI: Add static PCI resource attribute macros
alpha/PCI: Remove WARN from __pci_mmap_fits() and __legacy_mmap_fits()
alpha/PCI: Fix __pci_mmap_fits() overflow for zero-length BARs
alpha/PCI: Use PCI resource accessor macros
alpha/PCI: Use BAR index in sysfs attr->private instead of resource pointer
alpha/PCI: Add security_locked_down() check to pci_mmap_resource()
PCI/sysfs: Limit pci_sysfs_init() late_initcall compile scope
PCI/sysfs: Add stubs for pci_{create,remove}_sysfs_dev_files()
PCI/sysfs: Warn about BAR resize failure in __resource_resize_store()
PCI/sysfs: Convert PCI resource files to static attributes
PCI/sysfs: Add static PCI resource attribute macros
PCI/sysfs: Add CAP_SYS_ADMIN check to __resource_resize_store()
PCI/sysfs: Split pci_llseek_resource() for device and legacy attributes
PCI/sysfs: Only allow supported resource types in I/O and MMIO helpers
PCI: Add pci_resource_is_io() and pci_resource_is_mem() helpers
PCI/sysfs: Use PCI resource accessor macros
- Check option ROM header signatures and lengths before accessing to avoid
page faults and alignment faults (Guixin Liu)
* pci/rom:
PCI: Check ROM header and data structure addr before accessing
PCI: Introduce named defines for PCI ROM
- Log device readiness timeouts as errors, not warnings (Bjorn Helgaas)
- Wait for device readiness after soft reset (D3hot -> D0uninitialized
transition), when the device may respond with Request Retry Status if it
needs more time to initialize (Bjorn Helgaas)
- Drop unnecessary retries when restoring BARs (Lukas Wunner)
* pci/reset:
PCI: Drop unnecessary retries when restoring BARs
PCI: Wait for device readiness after D3hot -> D0uninitialized transition
PCI: Log device readiness timeouts as errors
- Don't try to power on/off devices unless we know they actually support
power control (Manivannan Sadhasivam)
* pci/pwrctrl:
PCI/pwrctrl: Lock device when calling device_is_bound()
PCI/pwrctrl: Do not try to power on/off devices that don't need pwrctrl
PCI/pwrctrl: Move pci_pwrctrl_is_required() earlier in file
- Fix race between pci_proc_init() and pci_bus_add_device() (Krzysztof
Wilczyński)
* pci/procfs:
PCI/proc: Fix race between pci_proc_init() and pci_bus_add_device()
- Set power state to 'unknown' for all devices, not just those with
drivers, during suspend (Lukas Wunner)
- Skip restoring Resizable BARs and VF Resizable BARs if device doesn't
respond to config reads, to avoid invalid array accesses (Marco
Nenciarini)
- Add pci_suspend_retains_context() so drivers can tell whether devices may
be reset while resuming from suspend due to platform issues; use this in
nvme to avoid issues on Qcom RCs (Manivannan Sadhasivam)
* pci/pm:
nvme-pci: Use pci_suspend_retains_context() during suspend
PCI: qcom: Indicate broken L1SS exit during resume from system suspend
PCI: Indicate context lost if L1SS exit is broken during resume from system suspend
PCI: Add pci_suspend_retains_context() to check if device state is preserved during suspend
PCI/IOV: Skip VF Resizable BAR restore on read error
PCI: Skip Resizable BAR restore on read error
PCI: Stop setting cached power state to 'unknown' on unbind
- Prevent P2PDMA as well as CPU access to non-mappable BARs, e.g., s390 ISM
BARs (Matt Evans)
- Add Intel QAT, DSA, IAA devices to whitelist (Lukas Wunner)
* pci/p2pdma:
PCI/P2PDMA: Add Intel QAT, DSA, IAA devices to whitelist
PCI/P2PDMA: Avoid returning a provider for non_mappable_bars
- Remove MPS/MRRS Kconfig settings (CONFIG_PCIE_BUS_*) that worked around a
WiFi device defect (Bjorn Helgaas)
- Always lift 2.5GT/s restriction in PCIe failed link retraining to avoid
clamping a link to 2.5GT/s after hot-plug changes the device (Maciej W.
Rozycki)
- Don't bother trying to retrain a 2.5GT/s link at 2.5GT/s since nothing
would be gained by the retrain (Maciej W. Rozycki)
* pci/enumeration:
PCI: Bail out early for 2.5GT/s devices in PCIe failed link retraining
PCI: Use pcie_get_speed_cap() in PCIe failed link retraining
PCI: Always lift 2.5GT/s restriction in PCIe failed link retraining
PCI: Remove MPS/MRRS Kconfig settings (CONFIG_PCIE_BUS_*)
- Don't reconfigure ASPM when entering low-power state; only do it
when returning back to D0 (Carlos Bilbao)
* pci/aspm:
PCI/ASPM: Don't reconfigure ASPM entering low-power state
- Improvements in handling of soundwire groups
- Additional checks flagged by various tools
- Intel driver updates for ghost Realtek device handling in firmware and
adding devices to wake lists
-----BEGIN PGP SIGNATURE-----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=dF8L
-----END PGP SIGNATURE-----
Merge tag 'soundwire-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Improvements in handling of soundwire groups
- Additional checks flagged by various tools
- Intel driver updates for ghost Realtek device handling in firmware
and adding devices to wake lists
* tag 'soundwire-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: dmi-quirks: Disable ghost Realtek devices
soundwire: only handle alert events when the peripheral is attached
soundwire: intel_ace2x: release bpt_stream when close it
soundwire: intel: Move suspend tracking from trigger to pm suspend
soundwire: intel_auxdevice: Add es9356 to wake_capable_list
soundwire: use krealloc_array to prevent integer overflow
soundwire: increase group->max_size after allocation
soundwire: fix bug in sdw_add_element_group_count found by syzkaller
soundwire: don't program SDW_SCP_BUSCLOCK_SCALE on a unattached Peripheral
soundwire: validate DT compatible before parsing it
soundwire: intel_auxdevice: Add cs42l43b to wake_capable_list
soundwire: stream: sdw_stream_remove_slave(): Check stream is valid
Follow-up to the v7.2 sched_ext pull. Pure source reorganization with no
functional change: the kernel/sched/ext* files move into a new
kernel/sched/ext/ subdirectory, and the headers and sources are made
self-contained so editor tooling can parse each file on its own.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCajmn3w4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGYRyAP4qs7Xlkva8ppSiJX/nja4OpQixpCZ1zi1yPDGK
iaJ+tQEA+bnkb2QI0Cwd9l+kY12/kl8gHUfqG0UPVyyEOvAeXgs=
=MvGz
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext tree reorg from Tejun Heo:
"Pure source reorganization with no functional change:
- the kernel/sched/ext* files move into a new kernel/sched/ext/
subdirectory
- the headers and sources are made self-contained so editor tooling
can parse each file on its own"
* tag 'sched_ext-for-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Move shared helpers from ext.c into internal.h and cid.h
sched_ext: Make kernel/sched/ext/ sources self-contained for clangd
sched_ext: Move sources under kernel/sched/ext/
pci_write_rom() controls access to the ROM content through the
corresponding sysfs attribute, and treats the input as a request to
disable only when it matches the string "0\n" exactly:
if ((off == 0) && (*buf == '0') && (count == 2))
The count == 2 condition encodes the trailing newline that echo(1) appends.
This was found when userspace wrote "0" without a trailing newline aiming
to disable access, which failed to match the condition above and enabled
access instead. For example:
$ echo 0 > rom # "0\n", count 2, access disabled
$ echo -n 0 > rom # "0", count 1, access enabled
$ echo > rom # "", count 1, access enabled (likely not desirable)
Parse the input with kstrtobool(), which handles common boolean inputs such
as "0", "1", "n", "y" or "off", "on", with or without a trailing newline,
so both of the above disable access, and update the now stale comment.
As a side effect, input that does not parse as a boolean is rejected with
-EINVAL rather than enabling access. The documented "0" and "1" continue
to work as before, and rejecting malformed input brings the attribute in
line with how sysfs attributes typically handle it.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260612182448.552406-1-kwilczynski@kernel.org
Currently, __resource_resize_store() uses sysfs_remove_groups() and
sysfs_create_groups() on pci_dev_resource_attr_groups to tear down and
recreate the resourceN files after a BAR resize, so the updated BAR sizes
are visible in sysfs.
The resourceN files only exist on platforms that define HAVE_PCI_MMAP or
ARCH_GENERIC_PCI_MMAP_RESOURCE. On platforms that define neither,
pci_dev_resource_attr_groups is NULL and the sysfs_remove_groups() and
sysfs_create_groups() calls in __resource_resize_store() become no-ops.
Resizable BAR (ReBAR) is a PCI Express Extended Capability
(PCI_EXT_CAP_ID_REBAR) that requires PCIe extended config space. Every
PCIe-capable architecture defines HAVE_PCI_MMAP or
ARCH_GENERIC_PCI_MMAP_RESOURCE (via arch headers or the asm-generic/pci.h
fallback). Architectures without either only support conventional PCI and
cannot have any ReBAR-capable devices.
Move the resize show and store helpers, the per-BAR attribute definitions,
and the attribute group behind the existing #ifdef HAVE_PCI_MMAP ||
ARCH_GENERIC_PCI_MMAP_RESOURCE guard, and fold the group reference in
pci_dev_groups[] into the existing #if block.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-25-kwilczynski@kernel.org
Currently, pci_create_legacy_files() and pci_remove_legacy_files() are
no-op stubs. With legacy attributes now handled by static groups
registered via pcibus_groups[], no call site needs them.
Remove both functions, their declarations, and the call sites in
pci_register_host_bridge(), pci_alloc_child_bus(), and pci_remove_bus().
Remove the pci_sysfs_init() late_initcall and sysfs_initialized. The
late_initcall originally existed to create all the dynamic PCI sysfs files,
but with both resource and legacy attributes now handled by static groups,
it is no longer needed.
Remove the legacy_io and legacy_mem fields from struct pci_bus which were
used to track the dynamically allocated legacy attributes.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-24-kwilczynski@kernel.org
Currently, legacy_io and legacy_mem are dynamically allocated and created
by pci_create_legacy_files(), with pci_adjust_legacy_attr() updating the
attributes at runtime on Alpha to rename them and shift the size for sparse
addressing.
Convert to four static const attributes (legacy_io, legacy_io_sparse,
legacy_mem, legacy_mem_sparse) with .is_bin_visible() callbacks that use
pci_legacy_has_sparse() to select the appropriate variant per bus. The
sizes are compile-time constants and .size is set directly on each
attribute.
Register the groups in pcibus_groups[] under a HAVE_PCI_LEGACY guard so the
driver model handles creation and removal automatically.
Stub out pci_create_legacy_files() and pci_remove_legacy_files() as the
dynamic creation is no longer needed. Remove the __weak
pci_adjust_legacy_attr(), Alpha's override, and its declaration from both
Alpha and PowerPC asm/pci.h headers.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-23-kwilczynski@kernel.org
Currently, Alpha's sparse/dense legacy attribute handling is done via
pci_adjust_legacy_attr(), which updates dynamically allocated attributes at
runtime. The upcoming conversion to static attributes needs a way to
determine sparse support at visibility check time.
Add a __weak pci_legacy_has_sparse() that returns false by default. Alpha
overrides it to check has_sparse() on the bus host controller.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-22-kwilczynski@kernel.org
Currently, pci_mmap_legacy_page_range() reads the legacy resource size from
bus->legacy_mem->size or bus->legacy_io->size. This couples the mmap
bounds check to the struct pci_bus fields that will be removed when legacy
attributes are converted to static definitions.
Compute the size directly using PCI_LEGACY_MEM_SIZE (0x100000) and
PCI_LEGACY_IO_SIZE (0xffff) macros, and shift by 5 bits for sparse systems.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20260508043543.217179-21-kwilczynski@kernel.org
Add defines for the standard PCI legacy address space sizes, replacing the
raw literals used by the legacy sysfs attributes.
Then, replace open-coded values with the newly added macros.
No functional changes intended.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-20-kwilczynski@kernel.org
Currently, pci_create_sysfs_dev_files() and pci_remove_sysfs_dev_files()
are no-op stubs. With both the generic and Alpha resource files now
handled by static attribute groups, no platform needs dynamic per-device
sysfs file creation.
Remove both functions, their declarations, and the call sites in
pci_bus_add_device() and pci_stop_dev().
Remove __weak pci_create_resource_files() and pci_remove_resource_files()
stubs and their declarations in pci.h, as no architecture overrides them
anymore.
Remove the res_attr[] and res_attr_wc[] fields from struct pci_dev which
were used to track dynamically allocated resource attributes.
Finally, simplify pci_sysfs_init() to only handle legacy file creation
under HAVE_PCI_LEGACY, removing the per-device loop and the
HAVE_PCI_SYSFS_INIT helper added earlier.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-19-kwilczynski@kernel.org
Previously, Alpha's PCI resource files (resourceN, resourceN_sparse,
resourceN_dense) were dynamically created by pci_create_resource_files(),
which overrides the generic __weak implementation. The previous code
allocated bin_attributes at runtime and managed them via the res_attr[] and
res_attr_wc[] fields in struct pci_dev.
Convert to static const attributes with three attribute groups (plain,
sparse, dense), each with an .is_bin_visible() callback that checks
resource length, has_sparse(), and sparse_mem_mmap_fits(). A .bin_size()
callback provides the resource size to the kernfs node, with the sparse
variant shifting by 5 bits for byte-level addressing.
Register the groups via ARCH_PCI_DEV_GROUPS so the driver model handles
creation and removal automatically.
Use the new pci_resource_is_mem() helper for the type check, replacing the
open-coded bitwise flag test.
Finally, remove pci_create_resource_files(), pci_remove_resource_files(),
pci_create_attr(), and pci_create_one_attr() which are no longer needed.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20260508043543.217179-18-kwilczynski@kernel.org
Add macros for declaring static binary attributes for Alpha's PCI resource
files:
- pci_dev_resource_attr(), for dense/BWX systems (mmap dense)
- pci_dev_resource_sparse_attr(), for sparse systems (mmap sparse)
- pci_dev_resource_dense_attr(), for dense companion files (mmap dense)
Each macro creates a const bin_attribute with the BAR index stored in the
.private property and the appropriate .mmap() callback.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20260508043543.217179-17-kwilczynski@kernel.org
Remove the WARN() that fires when userspace attempts to mmap beyond the BAR
bounds. The check still returns 0 to reject the mapping, but the warning
is excessive for normal operation.
A similar warning was removed from the PCI core in the commit 3b519e4ea6
("PCI: fix size checks for mmap() on /proc/bus/pci files").
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: squash https://lore.kernel.org/all/20260508045824.GA3160093@rocinante]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20260508043543.217179-16-kwilczynski@kernel.org
Currently, __pci_mmap_fits() computes the BAR size using
"pci_resource_len() - 1", which wraps to a large value when the BAR length
is zero, causing the bounds check to incorrectly succeed.
Add an early return for empty resources.
Fixes: 10a0ef39fb ("PCI/alpha: pci sysfs resources")
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20260508043543.217179-15-kwilczynski@kernel.org
Replace direct pdev->resource[] accesses with pci_resource_n(), and
open-coded res->flags type checks with pci_resource_is_mem() and
pci_resource_start() helpers.
While at it, move the pci_resource_n() call directly into
pcibios_resource_to_bus() and drop the local struct resource pointer.
No functional changes intended.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20260508043543.217179-14-kwilczynski@kernel.org
Currently, Alpha's pci_create_one_attr() stores a resource pointer in
attr->private, and pci_mmap_resource() loops through all BARs to find
the matching index.
Store the BAR index directly in attr->private and retrieve the resource via
pci_resource_n(). This eliminates the loop and aligns with the convention
used by the generic PCI sysfs code.
The PCI core change was first added in the commit dca40b186b ("PCI: Use
BAR index in sysfs attr->private instead of resource pointer").
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20260508043543.217179-13-kwilczynski@kernel.org
Currently, Alpha's pci_mmap_resource() does not check
security_locked_down(LOCKDOWN_PCI_ACCESS) before allowing userspace to mmap
PCI BARs.
The generic version has had this check since commit eb627e1772 ("PCI:
Lock down BAR access when the kernel is locked down") to prevent DMA
attacks when the kernel is locked down.
Add the same check to Alpha's pci_mmap_resource().
Fixes: eb627e1772 ("PCI: Lock down BAR access when the kernel is locked down")
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://patch.msgid.link/20260508043543.217179-12-kwilczynski@kernel.org
Currently, pci_sysfs_init() and sysfs_initialized compile unconditionally,
even on platforms where static attribute groups handle all resource file
creation.
Place them behind a new HAVE_PCI_SYSFS_INIT macro, especially as the
late_initcall is only needed when:
- HAVE_PCI_LEGACY is set, to iterate buses and create legacy I/O and
memory files.
- Neither HAVE_PCI_MMAP nor ARCH_GENERIC_PCI_MMAP_RESOURCE is set, to
iterate devices and create resource files via the __weak
pci_create_resource_files() stub override (this is how the Alpha
architecture handles this currently).
On most systems both conditions are false and the entire late_initcall
compiles away.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-11-kwilczynski@kernel.org
On platforms with HAVE_PCI_MMAP or ARCH_GENERIC_PCI_MMAP_RESOURCE, resource
files are now handled by static attribute groups registered via
pci_dev_groups[].
Stub out the pci_create_sysfs_dev_files() and pci_remove_sysfs_dev_files(),
as the dynamic resource file creation is no longer needed.
Also, simplify pci_sysfs_init() on these platforms to only iterate buses
for legacy attributes creation, skipping the per-device loop.
Move the __weak stubs for pci_create_resource_files() and
pci_remove_resource_files() into the #else branch since only platforms
without HAVE_PCI_MMAP (such as Alpha architecture) still need them. Guard
the res_attr[] and res_attr_wc[] fields in struct pci_dev the same way.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-10-kwilczynski@kernel.org
Add a pci_warn() to __resource_resize_store(), so that BAR resize failures
are visible to the user, which can help troubleshoot any potential resource
resize issues.
While at it, rename the resource_resize_is_visible() to
resource_resize_attr_is_visible() along with the corresponding group
variable to align with the naming convention used by the resource attribute
groups.
Also, change the order of pci_dev_groups[] such that the resize group is
now located alongside the other resource groups.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-9-kwilczynski@kernel.org
Currently, the PCI resource files (resourceN, resourceN_wc) are dynamically
created by pci_create_sysfs_dev_files(), called from both
pci_bus_add_device() and the pci_sysfs_init() late_initcall, with only a
sysfs_initialized flag for synchronisation. This has caused warnings and
boot panics when both paths race on the same device, e.g.:
sysfs: cannot create duplicate filename '/devices/pci0000:3c/0000:3c:01.0/0000:3e:00.2/resource2'
This is especially likely on Devicetree-based platforms, where the PCI host
controllers are platform drivers that probe via the driver model, which can
happen during or after the late_initcall. As such, pci_bus_add_device()
and pci_sysfs_init() are more likely to overlap.
Convert to static const attributes with three attribute groups (I/O, UC,
WC), each with an .is_bin_visible() callback that checks resource flags,
BAR length, and non_mappable_bars. A .bin_size() callback provides
pci_resource_len() to the kernfs node for correct stat and lseek behaviour.
As part of this conversion:
- Rename pci_read_resource_io() and pci_write_resource_io() to
pci_read_resource() and pci_write_resource() since the callbacks are no
longer I/O-specific in the static attribute context.
- Update __resource_resize_store() to use sysfs_create_groups() and
sysfs_remove_groups(), which re-evaluates visibility and runs the
.bin_size() callback for the static resource attribute groups.
- Remove pci_create_resource_files(), pci_remove_resource_files(), and
pci_create_attr() which are no longer needed.
- Move the __weak stubs outside the #if guard so they remain available
for callers converted in subsequent commits.
Platforms that do not define the HAVE_PCI_MMAP macro or the
ARCH_GENERIC_PCI_MMAP_RESOURCE macro, such as Alpha architecture,
continue using their platform-specific resource file creation.
For reference, the dynamic creation dates back to the pre-Git era:
https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/drivers/pci/pci-sysfs.c?id=42298be0eeb5ae98453b3374c36161b05a46c5dc
The write-combine support was added in commit 45aec1ae72 ("x86: PAT
export resource_wc in pci sysfs").
Many other reports mentioned in the cover letter (first Link: below).
Link: https://lore.kernel.org/r/20260508043543.217179-1-kwilczynski@kernel.org/
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=215515
Closes: https://github.com/openwrt/openwrt/issues/17143
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-8-kwilczynski@kernel.org
pci_proc_attach_device() creates procfs entries for PCI devices and is
called from pci_bus_add_device(). It lazily creates the per-bus procfs
directory (bus->procdir) via proc_mkdir() on first use, and returns early
if proc_initialized is not yet set.
On x86 with ACPI, PCI enumeration occurs at subsys_initcall, before
pci_proc_init() sets proc_initialized at device_initcall. The
for_each_pci_dev() loop in pci_proc_init() then creates procfs entries for
these already-enumerated devices, but runs without holding
pci_rescan_remove_lock.
On ARM64 with devicetree, PCI host bridges probe at device_initcall. With
async probing enabled, pci_bus_add_device() can run concurrently with
pci_proc_init(), and both may call pci_proc_attach_device() for the same
device or for different devices on the same bus. As pci_host_probe() holds
pci_rescan_remove_lock while pci_proc_init() does not, there is no
serialisation between the two paths.
When two threads concurrently call pci_proc_attach_device() for devices on
the same bus, both observe bus->procdir as NULL and both call proc_mkdir().
The proc filesystem serialises directory creation internally, so only one
caller succeeds. The other results in a warning like:
proc_dir_entry '000c:00/00.0' already registered
The caller receives NULL (duplicate entry) and unconditionally stores it to
bus->procdir, corrupting the valid pointer set by the first caller.
Serialise access to proc_initialized, proc_bus_pci_dir, bus->procdir and
dev->procent with a new mutex local to drivers/pci/proc.c, and store the
created entries to bus->procdir and dev->procent only on success, so a
failed creation can never overwrite a valid pointer.
Additionally, wrap the for_each_pci_dev() loop in pci_proc_init() with
pci_lock_rescan_remove() to serialise against concurrent PCI bus
operations, add an early return in pci_proc_attach_device() when
dev->procent is already set to make the function idempotent, and clear
bus->procdir in pci_proc_detach_bus() to prevent use of a dangling pointer
after proc_remove().
Reported-by: Shuan He <heshuan@bytedance.com>
Closes: https://lore.kernel.org/linux-pci/20250702155112.40124-2-heshuan@bytedance.com/
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20260611150543.511422-1-kwilczynski@kernel.org
Replace the unconditional msleep(100) with the common helper
pci_host_common_link_train_delay(). The helper only waits when
max_link_speed > 2, as required by PCIe r6.0 sec 6.6.1.
This avoids unnecessary delay for Gen1/Gen2 links while retaining
the mandatory 100 ms for higher speeds.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260518004246.1384532-8-18255117159@163.com
The MediaTek Gen3 PCIe host driver lacks the required 100 ms delay after
link training completes for speeds > 5.0 GT/s, as specified in PCIe r6.0
sec 6.6.1.
The driver already stores max_link_speed (from the device tree). After
mtk_pcie_startup_port() successfully brings up the link, call
pci_host_common_link_train_delay() to comply with the specification.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260518004246.1384532-7-18255117159@163.com
The Aardvark PCIe controller driver waits for the link to come up but
does not implement the mandatory 100 ms delay after link training
completes for speeds greater than 5.0 GT/s (PCIe r6.0 sec 6.6.1).
The driver already maintains a 'link_gen' field that holds the negotiated
link speed. Use it together with pci_host_common_link_train_delay() to
insert the required delay immediately after confirming that the link
is up.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260518004246.1384532-6-18255117159@163.com
The DWC driver already implements the 100 ms delay required by PCIe
r6.0 sec 6.6.1 by checking pci->max_link_speed and calling msleep(100).
Replace the open-coded msleep() with the new common helper
pci_host_common_link_train_delay() to reduce code duplication and
improve maintainability. No functional change intended.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260518004246.1384532-5-18255117159@163.com
The Cadence HPA (High Performance Architecture IP) specific link setup
function cdns_pcie_hpa_host_link_setup() waits for the link to come up
but does not implement the required 100 ms delay after link training
completes for speeds > 5.0 GT/s (PCIe r6.0 sec 6.6.1).
Add a call to pci_host_common_link_train_delay() immediately after the
link is confirmed to be up, using the max_link_speed field. Also, in the
HPA host setup function, read the device tree property "max-link-speed"
to initialize max_link_speed if not already set by a glue driver.
This ensures compliance for HPA-based platforms.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: driver tag "cadence: HPA:" -> "cadence-hpa:"]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260518004246.1384532-4-18255117159@163.com
Everything:
Total patches: 118
Reviews/patch: 1.57
Reviewed rate: 62%
Excluding DAMON:
Total patches: 117
Reviews/patch: 1.58
Reviewed rate: 63%
Excluding DAMON and selftests:
Total patches: 42
Reviews/patch: 3.14
Reviewed rate: 92%
Patch series in this merge:
- The 14 patch series "khugepaged: add mTHP collapse support" from Nico
Pache provides khugepaged with the capability to collapse anonymous
memory regions to mTHPs.
- The 14 patch series "Remove CONFIG_READ_ONLY_THP_FOR_FS and enable
file THP for writable files" from Zi Yan ends up removing the
READ_ONLY_THP_FOR_FS check in file_thp_enabled(), so that khugepaged and
MADV_COLLAPSE can run on FSes with PMD THP pagecache support even
without READ_ONLY_THP_FOR_FS enabled.
- The 55 patch series "make MM selftests more CI friendly" from Mike
Rapoport provides general fixes and cleanups to the MM selftests. It
also moves more MM selftests uder the kselftest framework, making them
more amenable to ongoing CI testing.
- The 13 patch series "selftests/mm: fix failures and robustness
improvements" from Sayali Patil fixes several issues in MM selftests
which were revealed by powerpc 64k pagesize.
- The 3 patch series "selftests/mm: assorted fixes for hmm-tests" from
Sayali Patil fixes more 64k pagesize issues in the MM selftests.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCajqsgwAKCRDdBJ7gKXxA
jlNoAP0bM125zRNpqy13hUYfofQQg8lC9k7cfEHqVtvD/dpaKgD/Xbjd8AUGbwjs
qoj3nNmUOfGFPubPZsU6YSFyVsYfzwM=
=T44n
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2026-06-23-08-55' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "khugepaged: add mTHP collapse support" (Nico Pache)
Provide khugepaged with the capability to collapse anonymous memory
regions to mTHPs
- "Remove CONFIG_READ_ONLY_THP_FOR_FS and enable file THP for writable
files" (Zi Yan)
Remove the READ_ONLY_THP_FOR_FS check in file_thp_enabled(), so that
khugepaged and MADV_COLLAPSE can run on filesystems with PMD THP
pagecache support even without READ_ONLY_THP_FOR_FS enabled
- "make MM selftests more CI friendly" (Mike Rapoport)
General fixes and cleanups to the MM selftests. Also move more MM
selftests under the kselftest framework, making them more amenable to
ongoing CI testing
- "selftests/mm: fix failures and robustness improvements" and
"selftests/mm: assorted fixes for hmm-tests" (Sayali Patil)
Fix several issues in MM selftests which were revealed by powerpc 64k
pagesize
* tag 'mm-stable-2026-06-23-08-55' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (118 commits)
Revert "mm: limit filemap_fault readahead to VMA boundaries"
mm/vmscan: pass NULL to trace vmscan node reclaim
mm: use mapping_mapped to simplify the code
selftests/mm: fix exclusive_cow test fork() handling
selftests/mm: remove hardcoded THP sizing assumptions in hmm tests
selftests/mm: allow PUD-level entries in compound testcase of hmm tests
mm/gup_test: reject wrapped user ranges
mm/page_frag: reject invalid CPUs in page_frag_test
mm/damon/core: always put unsuccessfully committed target pids
mm: page_isolation: avoid unsafe folio reads while scanning compound pages
mm/shrinker: do not hold RCU lock in shrinker_debugfs_count_show()
selftests: mm: fix and speedup "droppable" test
mm: merge writeout into pageout
MAINTAINERS: add Hao Ge as reviewer for codetag and alloc_tag
selftests/mm: clarify alternate unmapping in compaction_test
selftests/mm: move hwpoison setup into run_test() and silence modprobe output for memory-failure category
selftests/mm: skip uffd-stress test when nr_pages_per_cpu is zero
selftests/mm: skip uffd-wp-mremap if UFFD write-protect is unsupported
selftests/mm: ensure destination is hugetlb-backed in hugetlb-mremap
selftest/mm: register existing mapping with userfaultfd in hugetlb-mremap
...
- Introduce 'perf inject --aslr' to remap ASLR-randomized
addresses in perf.data files, enabling reproducible analysis
across runs with different address space layouts.
- Refactor evsel out of sample processing paths: store evsel in
struct perf_sample and remove the redundant evsel parameter from
tool APIs, tracepoint handlers, hist entry iterators, and
db-export, simplifying the entire tool callback chain.
- Switch architecture detection from string-based perf_env__arch()
comparisons to the numeric ELF e_machine field across the
codebase (capstone, print_insn, c2c, lock-contention, sort,
sample-raw, machine, header), making cross-analysis more robust.
- Overhaul ARM CoreSight ETM tests: add deterministic and
named_threads workloads, speed up basic and disassembly tests,
add process attribution and concurrent threads tests, remove
unused workloads and duplicate tests, queue context packets for
the frontend decoder.
- Add ARM SPE IMPDEF event decoding for Arm Neoverse N1, store
MIDR in arm_spe_pkt for per-CPU event mapping, handle missing
CPU IDs gracefully.
- Refactor libunwind support: remove the libunwind-local backend,
make register reading cross-platform, add RISC-V libunwind
support, allow dynamic selection between libdw and libunwind
unwinding at runtime.
- Extensive hardening of perf.data parsing against crafted files:
add bounds checks and byte-swap validation for session records,
feature sections, header attributes, BPF metadata, auxtrace
errors, compressed events, CPU maps, build ID notes, and ELF
program headers. Add minimum event size validation and file
offset diagnostics.
- Fix libdw API contract violations across dwarf-aux, libdw,
probe-finder, annotate-data, and debuginfo subsystems. Fix
callchain parent update in ORDER_CALLER mode, support DWARF line
0 in inline lists, handle multiple address spaces in callchains.
- Fix numerous 'perf sched' bugs: thread reference leaks, memory
leaks, heap overflows with cross-machine recordings, NULL
dereferences, replace BUG_ON assertions with graceful error
handling, bounds-check CPU indices, fix SIGCHLD vs pause() races
in sched stats.
- Overhaul the build system: move BPF skeleton generation out of
Makefile.perf into bpf_skel.mak, decouple pmu-events from the
prepare target, make beauty generated C code standalone .o files,
compile BPF skeletons with -mcpu=v3, fix continuous rebuilds,
various cleanups.
- Add 'perf test' JUnit XML reporting with -j/--junit option, split
monolithic test suites into sub-tests, add summary reporting,
refactor parallel poll loop, fix test failures on musl-based
systems.
- Fix 'perf c2c' memory leaks in hist entry and format list
handling, use-after-free in error paths, bounds-check CPU and
node IDs.
- Fix 'perf bpf' metadata leaks on duplicate insert and alloc
failure, bounds-check array offsets, validate event sizes and
func_info fields, add NULL checks.
- Fix hwmon PMU: off-by-one null termination on sysfs reads,
strlcpy buffer overflow in parse_hwmon_filename(), fd 0 check,
empty label reads, scnprintf usage.
- Fix symbols subsystem: bounds-check ELF and sysfs build ID note
iteration, validate p_filesz, fix 32-bit ELF bswap error, fix
signed overflow in size checks, bounds-check .gnu_debuglink
section.
- Fix tools lib api: null termination in filename__read_int/ull(),
uninitialized stack data in filename__write_int(), snprintf
truncation in mount_overload().
- Replace libbabeltrace with babeltrace2-ctf-writer for CTF
conversion in 'perf data'.
- Add RISC-V SDT argument parsing for static tracepoints.
- Add 'perf trace --show-cpu' option to display CPU id.
- Add 'perf bench sched pipe --write-size' option.
- Add a perf-specific .clang-format that overrides some kernel
style behaviors.
- Update Intel vendor events for Alder Lake, Arrow Lake, Clearwater
Forest, Emerald Rapids, Granite Rapids, Grand Ridge, Lunar Lake,
Meteor Lake, Panther Lake, Sapphire Rapids, Sierra Forest.
- Add IOMMU metrics for AMD and Intel.
- Fix AMD event: switch l2_itlb_misses to
bp_l1_tlb_miss_l2_tlb_miss.all.
- Add AMD IBS improvements: decode Streaming-store and
Remote-Socket flags, suppress bogus fields on Zen4+, skip
privilege test on Zen6+.
- Fix 'perf lock contention' SIGCHLD vs pause() race, allow
'mmap_lock' in -L filter, enable end-timestamp for cgroup
aggregation, fix non-atomic data updates.
- Fix 'perf stat' false NMI watchdog warning in aggregation modes,
bounds-check CPU index in topology callbacks, add aggr_nr metric
parser support for uncore scaling.
- Fix 'perf timechart' memory leaks, CPU bounds checking,
use-after-free on corrupted callchains.
- Fix 'perf inject' itrace branch stack synthesis, fix synthesized
sample size with branch stacks.
- Fix DSO heap overflow on decompressed paths, uninitialized
pathname on fallback, set proper error codes.
- Fix various snprintf/scnprintf usages to prevent buffer overflows
and truncation across the codebase.
- Fix off-by-one stack buffer overflow in kallsyms__parse().
- Fix 'perf kwork' memory management, address sanitizer issues,
bounds check work->cpu.
- Fix 'perf tpebs' concurrent stop races and PID reuse hazards.
- Add O_CLOEXEC to open() calls and use mkostemp() for temporary
files to prevent file descriptor leaks to child processes.
- Fix s390 Python extension TEXTREL by compiling as PIC.
- Fix build with ASAN for jitdump.
- Fix build failure due to btf_vlen() return type change.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCajmIQAAKCRCyPKLppCJ+
J/8DAQCHYyodbD+Y+zX2kvaed6EStTTTLN4nyteWVb/3b0UZ5AEA4ECHdgpxgAx8
h6C+n8m8aAC6LyMgSYJwGm92rGgaewM=
=CPUX
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v7.2-1-2026-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
- Introduce 'perf inject --aslr' to remap ASLR-randomized addresses in
perf.data files, enabling reproducible analysis across runs with
different address space layouts
- Refactor evsel out of sample processing paths: store evsel in struct
perf_sample and remove the redundant evsel parameter from tool APIs,
tracepoint handlers, hist entry iterators, and db-export, simplifying
the entire tool callback chain
- Switch architecture detection from string-based perf_env__arch()
comparisons to the numeric ELF e_machine field across the codebase
(capstone, print_insn, c2c, lock-contention, sort, sample-raw,
machine, header), making cross-analysis more robust
- Overhaul ARM CoreSight ETM tests: add deterministic and named_threads
workloads, speed up basic and disassembly tests, add process
attribution and concurrent threads tests, remove unused workloads and
duplicate tests, queue context packets for the frontend decoder
- Add ARM SPE IMPDEF event decoding for Arm Neoverse N1, store MIDR in
arm_spe_pkt for per-CPU event mapping, handle missing CPU IDs
gracefully
- Refactor libunwind support: remove the libunwind-local backend, make
register reading cross-platform, add RISC-V libunwind support, allow
dynamic selection between libdw and libunwind unwinding at runtime
- Extensive hardening of perf.data parsing against crafted files: add
bounds checks and byte-swap validation for session records, feature
sections, header attributes, BPF metadata, auxtrace errors,
compressed events, CPU maps, build ID notes, and ELF program headers.
Add minimum event size validation and file offset diagnostics
- Fix libdw API contract violations across dwarf-aux, libdw,
probe-finder, annotate-data, and debuginfo subsystems. Fix callchain
parent update in ORDER_CALLER mode, support DWARF line 0 in inline
lists, handle multiple address spaces in callchains
- Fix numerous 'perf sched' bugs: thread reference leaks, memory leaks,
heap overflows with cross-machine recordings, NULL dereferences,
replace BUG_ON assertions with graceful error handling, bounds-check
CPU indices, fix SIGCHLD vs pause() races in sched stats
- Overhaul the build system: move BPF skeleton generation out of
Makefile.perf into bpf_skel.mak, decouple pmu-events from the prepare
target, make beauty generated C code standalone .o files, compile BPF
skeletons with -mcpu=v3, fix continuous rebuilds, various cleanups
- Add 'perf test' JUnit XML reporting with -j/--junit option, split
monolithic test suites into sub-tests, add summary reporting,
refactor parallel poll loop, fix test failures on musl-based systems
- Fix 'perf c2c' memory leaks in hist entry and format list handling,
use-after-free in error paths, bounds-check CPU and node IDs
- Fix 'perf bpf' metadata leaks on duplicate insert and alloc failure,
bounds-check array offsets, validate event sizes and func_info
fields, add NULL checks
- Fix hwmon PMU: off-by-one null termination on sysfs reads, strlcpy
buffer overflow in parse_hwmon_filename(), fd 0 check, empty label
reads, scnprintf usage
- Fix symbols subsystem: bounds-check ELF and sysfs build ID note
iteration, validate p_filesz, fix 32-bit ELF bswap error, fix signed
overflow in size checks, bounds-check .gnu_debuglink section
- Fix tools lib api: null termination in filename__read_int/ull(),
uninitialized stack data in filename__write_int(), snprintf
truncation in mount_overload()
- Replace libbabeltrace with babeltrace2-ctf-writer for CTF conversion
in 'perf data'
- Add RISC-V SDT argument parsing for static tracepoints
- Add 'perf trace --show-cpu' option to display CPU id
- Add 'perf bench sched pipe --write-size' option
- Add a perf-specific .clang-format that overrides some kernel style
behaviors
- Update Intel vendor events for Alder Lake, Arrow Lake, Clearwater
Forest, Emerald Rapids, Granite Rapids, Grand Ridge, Lunar Lake,
Meteor Lake, Panther Lake, Sapphire Rapids, Sierra Forest
- Add IOMMU metrics for AMD and Intel
- Fix AMD event: switch l2_itlb_misses to
bp_l1_tlb_miss_l2_tlb_miss.all
- Add AMD IBS improvements: decode Streaming-store and Remote-Socket
flags, suppress bogus fields on Zen4+, skip privilege test on Zen6+
- Fix 'perf lock contention' SIGCHLD vs pause() race, allow 'mmap_lock'
in -L filter, enable end-timestamp for cgroup aggregation, fix
non-atomic data updates
- Fix 'perf stat' false NMI watchdog warning in aggregation modes,
bounds-check CPU index in topology callbacks, add aggr_nr metric
parser support for uncore scaling
- Fix 'perf timechart' memory leaks, CPU bounds checking,
use-after-free on corrupted callchains
- Fix 'perf inject' itrace branch stack synthesis, fix synthesized
sample size with branch stacks
- Fix DSO heap overflow on decompressed paths, uninitialized pathname
on fallback, set proper error codes
- Fix various snprintf/scnprintf usages to prevent buffer overflows and
truncation across the codebase
- Fix off-by-one stack buffer overflow in kallsyms__parse()
- Fix 'perf kwork' memory management, address sanitizer issues, bounds
check work->cpu
- Fix 'perf tpebs' concurrent stop races and PID reuse hazards
- Add O_CLOEXEC to open() calls and use mkostemp() for temporary files
to prevent file descriptor leaks to child processes
- Fix s390 Python extension TEXTREL by compiling as PIC
- Fix build with ASAN for jitdump
- Fix build failure due to btf_vlen() return type change
* tag 'perf-tools-for-v7.2-1-2026-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (343 commits)
perf bpf: Fix up build failure due to change of btf_vlen() return type
perf dso: Set standard errno on decompression failure
perf bpf: Validate array presence before casting BPF prog info pointers
perf c2c: Fix hist entry and format list leaks in c2c_he_free()
perf c2c: Free format list entries when c2c_hists__init() fails
perf cs-etm: Bounds-check CPU in cs_etm__get_queue()
perf cs-etm: Require full global header in auxtrace_info size check
perf cs-etm: Validate num_cpu before metadata allocation
perf machine: Use snprintf() for guestmount path construction
perf machine: Propagate machine__init() error to callers
perf trace: Guard __probe_ip suppression with evsel__is_probe()
perf evsel: Add lazy-initialized probe type detection helpers
perf evsel: Add no-libtraceevent stubs for evsel__field() and evsel__common_field()
perf cs-etm: Reject CPU IDs that would overflow signed comparison
perf c2c: Free format list entries when releasing c2c hist entries
perf bpf: Bounds-check array offsets in bpil_offs_to_addr()
perf bpf: Reject oversized BPF metadata events that truncate header.size
perf bpf: Validate func_info_rec_size and sub_id in synthesize_bpf_prog_name()
perf sched: Replace (void*)1 sentinel with proper runtime allocation
perf hwmon: Fix fd check to accept fd 0 in hwmon_pmu__describe_items()
...
PCIe controller present in Eliza SoC is backwards compatible with the
controller present in SM8550 SoC. Hence, add the compatible with SM8550
fallback.
Eliza requires 6 reg entries, 8 clocks and 9 interrupts, so add the
corresponding allOf constraints.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260608-eliza-v3-2-9bdeb7434b28@oss.qualcomm.com
Document the Renesas RZ/V2N PCIe host controller, which is compatible with
the RZ/G3E PCIe IP and therefore uses it as a fallback compatible. The
only difference is that it uses device ID 0x003B.
Make the binding title generic to avoid extending the title for each new
SoC, and update the description to list the supported SoCs and their
capabilities.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260501102407.29462-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Add dma-coherent as an allowed property in the SG2042 PCIe host controller
binding. SG2042's PCIe Root Complexes are cache-coherent with the CPU.
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260331171248.973014-2-gaohan@iscas.ac.cn
pci_resource_alignment() calculates resource alignment and should not alter
its input structs. Make its input parameters const.
It requires making also pci_cardbus_resource_alignment() input const.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260429122617.7324-9-ilpo.jarvinen@linux.intel.com
pci_sriov_resource_alignment() inputs struct pci_dev which it should not
need to alter to calculate alignment.
Make pci_dev pci_sriov_resource_alignment() inputs const. It requires
making pci_iov_resource_size() input const as well.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260429122617.7324-8-ilpo.jarvinen@linux.intel.com
Convert input pci_dev for pseries_get_iov_fw_value() and pnv_iov_get() to
const to be able to convert pcibios_iov_resource_alignment() as well in an
upcoming change.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260429122617.7324-7-ilpo.jarvinen@linux.intel.com
__pci_bridge_assign_resources() inputs const pci_dev *bridge, but then
immediately casts const away to pass the bridge to
pdev_assign_resources_sorted().
As pdev_assign_resources_sorted() performs assignment of resources, it
is not possible to make its input parameter to const. Neither of the
__pci_bridge_assign_resources() callers requires the bridge parameter
to be const.
Thus, simply remove the out of place cast and convert the input parameter
to non-const.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260429122617.7324-5-ilpo.jarvinen@linux.intel.com
Callers of __pci_bridge_assign_resources() and __pci_bus_assign_resources()
perform WARN_ON_ONCE(list_empty(add_list))) checks to sanity check that all
optional sizes were processed (and removed) from the list. The empty list
sanity check is duplicated code so the more appropriate place for it would
be inside the called function.
Placing the empty list check into __pci_bus_assign_resources() also ensures
all callsites do perform the sanity check which currently is not the case
when being called from enable_slot(). This inconsistency was noted by
Sashiko though only inside its in depth log but not flagged as a real
problem, possibly because this is only a sanity check that should never
fire. Nonetheless, this sanity check has been very useful to catch problems
early in the past so it's good to do it consistently everywhere.
As __pci_bus_assign_resources() is a recursive function, it needs to be
renamed to __pci_bus_assign_resources_one() to only perform the empty list
check at the end of processing the entire hierarchy in
__pci_bus_assign_resources().
Suggested-by: sashiko.dev # Sanity check missing from enable_slot()
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260429122617.7324-4-ilpo.jarvinen@linux.intel.com
The resource fitting algorithm uses different names from the list holding
the optional sizes: added, add_head, add_list, and realloc_head. 'add_list'
sounds the most natural and some of the related variables also use 'add'
such as 'add_size'.
To reduce variation, rename 'added' and 'add_head' to 'add_list'. Also
rename some 'realloc_head' cases selectively to 'add_list'.
While it would be nice to rename every 'realloc_head' to 'add_list' for
consistency, it might create a backport headache with all the work going
into this algorithm that may need to be eventually backported. Thus, it's
better to leave 'realloc_head' as is for now.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260429122617.7324-3-ilpo.jarvinen@linux.intel.com
