It's not used anymore, so remove it. This allows trully independent
layer state from mixer.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-31-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
This allows to almost completely decouple layer code from mixer. This is
important for DE33.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-29-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Later special plane only driver for DE33 will provide separate
configuration. This change will also help layer driver migrate away from
mixer structure.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-28-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
On DE2 and DE3, UI scalers are located right after VI scalers. So in
order to calculate proper UI scaler base address, number of VI scalers
must be known. In practice, it is same as number of VI channels, but it
doesn't need to be.
Let's make a quirk for this number. Code for configuring channels and
associated functions won't have access to vi_num quirk anymore after
rework for independent planes.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-27-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
They can't be triggered if mixer configuration is properly specified in
quirks. Additionally, number of VI channels won't be available in future
due to rework for DE33 support.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-26-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Determination if FCC unit can be used for VI layer alpha depends on
number of VI channels. This info won't be available anymore in future
to VI layer driver because of DE33 way of allocating planes from same
pool to different mixers.
While order is slightly changed, it doesn't affect anything due to
double buffering of registers. New order keeps related registers
together and quirk separate.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-25-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Now that channel base calculation is straightforward, let's update VI
scaler base calculation to be simpler. At the same time, also introduce
macro to avoid magic numbers.
Note, reason why current magic value and new macro value isn't the same
is because sun8i_channel_base() already introduces offset to channel
registers. Previous value is just the difference to VI scaler registers.
However, new code calculates scaler base from channel base. This is also
easier to understand when looking into BSP driver. Macro value can be
easily found whereas old diff value was not.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-24-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Layer will be more universal, due to DE33 support.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-22-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Till DE33, there were no reason to decouple registers from mixer.
However, with future new plane driver, this will be necessary.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-21-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Layer related peripherals should take layer struct as a input. This
looks cleaner and also necessary for proper DE33 support later.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-20-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Layer related peripherals should take layer struct as a input. This
looks cleaner and also necessary for proper DE33 support later.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-19-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
This change is equally a cleanup (less arguments) and preparation for
DE33 separate plane driver. It will introduce additional register space.
No functional changes.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-18-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
This change is equally a cleanup (less arguments) and preparation for
DE33 separate plane driver. It will introduce additional register space.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-17-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
With DE33, number of planes no longer depends on mixer because layers
are shared between all mixers.
Get this value via parameter, so DE specific code can fill in proper
value.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-16-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
In the pursuit of making UI/VI layer code independent of DE version,
change meaning of UI index to index of the plane within mixer. DE33 can
split amount of VI and UI planes between multiple mixer in whatever way
it deems acceptable, so simple calculation VI num + UI index won't be
meaningful anymore.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-15-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Plane type determination logic inside layer init functions doesn't allow
index register to be repurposed to plane sequence, which it almost is.
So move out the logic to mixer, which allows further rework for DE33
support.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-14-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Taking plane state directly reduces number of arguments, avoids copying
values and allows making additional decisions. For example, when plane
is disabled, CSC should be turned off.
This is also cleanup for later patches which will move call to another
place.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-13-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Merging both function into one lets this one decide on it's own if CSC
should be enabled or not. Currently heuristics for that is pretty simple
- enable it for YUV formats and disable for RGB. DE3 and newer allows
YUV pipeline, which will be easier to implement these way.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-12-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Enable or disable layer only in layer atomic update callback. Doing so
will enable having separate layer driver later for DE33.
There is no fear that enable bit would be set incorrectly, as all
read-modify-write sequences for that register are now eliminated.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-11-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
It turns out that none of the VI channel registers were meant to be
read. Mostly it works fine but sometimes it returns incorrect values.
Rework VI layer code to write all registers in one go to avoid reads.
This rework will also allow proper code separation.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-10-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
It turns out that none of the UI channel registers were meant to be
read. Mostly it works fine but sometimes it returns incorrect values.
Rework UI layer code to write all registers in one go to avoid reads.
This rework will also allow proper code separation.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-9-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
With upcoming DE33 support, layer management must be decoupled from
other operations like blender configuration. There are two reasons:
- DE33 will have separate driver for planes and thus it will be harder
to manage different register spaces
- Architecturaly it's better to split access by modules. Blender is now
exclusively managed by mixer.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-8-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Functions called by atomic_commit callback should not fail. None of them
actually returns error, so make them void.
No functional change.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-7-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
DRM requires that all check are done in atomic_check callback. Move
one check from atomic_commit to atomic_check callback.
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Link: https://patch.msgid.link/20251104180942.61538-6-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
DRM requires that all checks are done in atomic_check callback. Move
one check from atomic_commit to atomic_check callback.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-5-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
drm_universal_plane_init() can already call some callbacks, like
format_mod_supported, during initialization. Because of that, fields
should be initialized beforehand.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-4-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Those engine versions don't need ccsc argument, since CSC units are
located on different position and for each layer.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-3-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Properly define macros. Till now raw numbers and inappropriate macro was
used.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251104180942.61538-2-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Change #if to #ifdef CONFIG_PROC_FS to fix warning reported by test robot:
drivers/accel/ivpu/ivpu_drv.c:458:5: warning: "CONFIG_PROC_FS" is not defined, evaluates to 0 [-Wundef]
Fixes: 63cc028484 ("accel/ivpu: Add fdinfo support for memory statistics")
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Andrzej.Kacprowski@linux.intel.com
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251112071911.1136934-1-karol.wachowski@linux.intel.com
Do not count buffer objects that have no backing pages, including imported
buffers where pages are set by VM faults triggered by userspace or pinned
by other drivers. Instead, return information about actual memory used by
the NPU.
Counting imported buffers results in incorrect calculations when
the same pages are counted multiple times, giving overly high
results.
Fixes: 7bfc9fa995 ("accel/ivpu: Expose NPU memory utilization info in sysfs")
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251106101052.1050348-3-karol.wachowski@linux.intel.com
Implement DRM fdinfo interface to expose memory usage statistics
for NPU device file descriptors. Exclude unpinned and imported
buffers from resident memory calculations to provide accurate
memory usage reporting.
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251106101052.1050348-2-karol.wachowski@linux.intel.com
Stephen Rothwell reports htmldocs warnings when merging drm-misc tree:
Documentation/ABI/stable/sysfs-driver-qaic:1: ERROR: Unexpected indentation. [docutils]
Documentation/ABI/stable/sysfs-driver-qaic:1: WARNING: Block quote ends without a blank line; unexpected unindent. [docutils]
Documentation/ABI/stable/sysfs-driver-qaic:1: WARNING: Definition list ends without a blank line; unexpected unindent. [docutils]
These are caused by DMA Bridge channel (DBC) states list in sysfs ABI
docs. Format it as a table to fix them.
Fixes: f286066ed9 ("accel/qaic: Add DMA Bridge Channel(DBC) sysfs and uevents")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20251110135038.29e96051@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110035952.25778-4-bagasdotme@gmail.com
Stephen Rothwell reports htmldocs warnings when merging drm-misc tree:
Documentation/accel/qaic/aic100.rst:502: ERROR: Unexpected indentation. [docutils]
Documentation/accel/qaic/aic100.rst:504: WARNING: Block quote ends without a blank line; unexpected unindent. [docutils]
Fix these by separating DBC_STATE_* definition list from preceding
paragraph.
Fixes: 9675093ace ("accel/qaic: Implement basic SSR handling")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20251110132401.200d88bd@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110035952.25778-3-bagasdotme@gmail.com
This commit addresses a memleak issue of panthor_vma (or drm_gpuva)
structure in Panthor driver, that can happen if the GPU page table
update operation to map the pages fail.
The issue is very unlikely to occur in practice.
v2: Add panthor_vm_op_ctx_return_vma() helper (Boris)
v3: Add WARN_ON_ONCE (Boris)
Fixes: 647810ec24 ("drm/panthor: Add the MMU/VM logical block")
Signed-off-by: Akash Goel <akash.goel@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251021081042.1377406-1-akash.goel@arm.com
In the atomic update callback, ast should call
drm_gem_fb_begin_cpu_access() to make sure it can read the
framebuffer from the CPU, otherwise the data might not be there due
to cache, and synchronization.
Tested on a Lenovo SE100, while rendering on the ArrowLake GPU with
i915 driver, and using ast for display.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20251030091627.340780-1-jfalempe@redhat.com
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
We have drm_crtc_vblank_waitqueue() to get the wait_queue_head_t pointer
for a vblank. Use it instead of poking at dev->vblank[] directly.
Due to the macro maze of wait_event_timeout() that uses the address-of
operator on the argument, we have to pass it in with the indirection
operator.
Cc: Rob Clark <robin.clark@oss.qualcomm.com>
Cc: Dmitry Baryshkov <lumag@kernel.org>
Cc: Abhinav Kumar <abhinav.kumar@linux.dev>
Cc: Jessica Zhang <jesszhan0024@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/5917fd537f4a775a1c135a68f294df3917980943.1762513240.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We have drm_crtc_vblank_waitqueue() to get the wait_queue_head_t pointer
for a vblank. Use it instead of poking at dev->vblank[] directly.
Due to the macro maze of wait_event_timeout() that uses the address-of
operator on the argument, we have to pass it in with the indirection
operator.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/1097348197acea9110da8baebbbc189890d01660.1762513240.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We have drm_crtc_vblank_crtc() to get the struct drm_vblank_crtc pointer
for a crtc. Use it instead of poking at dev->vblank[] directly.
However, we also need to get the crtc to start with. We could use
drm_crtc_from_index(), but refactor to use drm_for_each_crtc() instead.
This is all a bit tedious, and perhaps the driver shouldn't be poking at
vblank->enabled directly in the first place. But at least hide away the
dev->vblank[] access in drm_vblank.c where it belongs.
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patch.msgid.link/27b2c6772c68120d0d5ec28477db0d993743e955.1762513240.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We have drm_crtc_vblank_crtc() to get the struct drm_vblank_crtc pointer
for a crtc. Use it instead of poking at dev->vblank[] directly.
Cc: Zack Rusin <zack.rusin@broadcom.com>
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Link: https://patch.msgid.link/5157c2e927676aad75348855cf7b6745cba90003.1762513240.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We have drm_crtc_vblank_crtc() to get the struct drm_vblank_crtc pointer
for a crtc. Use it instead of poking at dev->vblank[] directly.
Cc: Jyri Sarha <jyri.sarha@iki.fi>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patch.msgid.link/ffd5ebe03391b3c01e616c0c844a4b8ddecede36.1762513240.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Document support for the DU IP found on the Renesas RZ/V2N (R9A09G056) SoC.
The DU IP is functionally identical to that on the RZ/V2H(P) SoC, so no
driver changes are needed. The existing `renesas,r9a09g057-du` compatible
will be used as a fallback for the RZ/V2N SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251023213350.681602-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Rename irq_polling_work to qaic_irq_polling_work to reduce ambiguity
and avoid potential naming conflicts in the future.
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031192511.3179130-1-zachary.mckevitt@oss.qualcomm.com
After subsystem of the device has crashed it sends a message with
command DEBUG_TRANSFER_INFO to kernel(host). Send ACK for that message
and then prepare to collect the ramdump of the subsystem
Steps of crashdump collection is as follows,
1) Device sends DEBUG_TRANSFER_INFO message indicating that device wants
to send crashdump.
2) Send an acknowledgment to that message either ACK or NACK.
a) NACK will inform the device that host will not download the
crashdump
b) ACK will inform the device that host will download the crashdump
3) Along with the DEBUG_TRANSFER_INFO we receive a table base address and
its length, use that to download that table from device.
a) This table is meta data of the crashdump and not the actual
crashdump.
4) After we respond as ACK for message received on step 1) we start
downloading the table. Use series of MEMORY_READ/MEMORY_READ_RSP SSR
commands to download the entire table.
5) Each entry in the table represents a segment of crashdump. Once the
table downloading is complete, iterate through each entry of table
and download each crashdump segment(same as table itself). Table entry
contains the memory base address and length along with other info.
6) After the entire crashdump is downloaded send DEBUG_TRANSFER_DONE
which marks that host is terminating the crashdump transfer. This
message can be send in both success or error case.
7) After receiving DEBUG_TRANSFER_DONE_RSP hand over the crashdump to
dev_coredumpv() and free all the necessary memory.
Co-developed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Co-developed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Pranjal Ramajor Asha Kanojiya <pkanojiy@codeaurora.org>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031174059.2814445-4-zachary.mckevitt@oss.qualcomm.com
Subsystem restart (SSR) for a qaic device means that a NSP has crashed,
and will be restarted. However the restart process will lose any state
associated with activation, so the user will need to do some recovery.
While SSR has the provision to collect a crash dump, this patch does not
implement support for it.
Co-developed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Co-developed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Co-developed-by: Troy Hanson <quic_thanson@quicinc.com>
Signed-off-by: Troy Hanson <quic_thanson@quicinc.com>
Co-developed-by: Aswin Venkatesan <aswivenk@qti.qualcomm.com>
Signed-off-by: Aswin Venkatesan <aswivenk@qti.qualcomm.com>
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
[jhugo: Fix minor checkpatch whitespace issues]
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031174059.2814445-3-zachary.mckevitt@oss.qualcomm.com
Expose sysfs files for each DBC representing the current state of that DBC.
For example, sysfs for DBC ID 0 and accel minor number 0 looks like this,
/sys/class/accel/accel0/dbc0_state
Following are the states and their corresponding values,
DBC_STATE_IDLE (0)
DBC_STATE_ASSIGNED (1)
DBC_STATE_BEFORE_SHUTDOWN (2)
DBC_STATE_AFTER_SHUTDOWN (3)
DBC_STATE_BEFORE_POWER_UP (4)
DBC_STATE_AFTER_POWER_UP (5)
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031174059.2814445-2-zachary.mckevitt@oss.qualcomm.com
Failing to set power off indicates an unrecoverable hardware or firmware
error. Update the driver to treat such a failure as a fatal condition
and stop further operations that depend on successful power state
transition.
This prevents undefined behavior when the hardware remains in an
unexpected state after a failed power-off attempt.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251106180521.1095218-1-lizhi.hou@amd.com
