The mes.fw[] is per-pipe resource shared accross xcc inst.
And enlarge hung_queue array to max inst_pipes.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct the base addr value shown on sysfs with ignore reg_base_64,
since the base_addr value have been over write when discovery_init.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable to print RLC v2_5 related firmware information by default.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Calculate sdma instance number according to xcc_mask and
num_inst_per_xcc, and correct adev->sdma.sdma_mask according
to totally sdma instance number.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UMC node_inst_num can exceed 32, causing
(1 << node_inst_num) to shift a 32-bit int
out of bounds
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For MP0 15.0.8, IMU ucode is part of IFWI and ASP would load it by default.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update GFX CGCG flags and fix num_xcc assignment
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Return false from soc_v1_0_reset_on_init as psp is loaded with ifwi and
sol register will be non zero on first load itself
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
IH v7_1 changes the offsets of some registers relative to
IH v7_0. Introduce IH v7_1-specific register access
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If DF function not initialized, NULL pointer issue
will happen on soc24.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On some hardware configuration, sriov guests
cannot access mm_index and mm_data. Update the
IPD table via memcpy in these cases
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement a driver path to read the IP discovery
binary offset and size from DRIVER_SCRATCH registers
BIOS signals usage by setting a feature flag that
instructs the driver to use this method. Otherwise,
fallback to legacy approach.
v2: Simplify discovery offset/size retrieval in
get_tmr_info
v3: Update get_tmr_info to cover discovery offset
and size retrieval for both bare-metal and sriov
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use an common function to check the validation of discovery table.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support for new IP discovery binary header version 2.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Error handling path should unreserve bo then return failed.
Fixes: 305cd109b7 ("drm/amdkfd: Validate user queue update")
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following updates:
- [FW Promotion] Release 0.1.50.0
- Sync DCN42 with DC 3.2.373
- Add DML support for dcn42
- Enable dcn42 DC clk_mgr
- Clean up unused code
- Add back missing memory type in array
- Fix compile warnings in dml2_0
- Check for S0i3 to be done before DCCG init on DCN21
- Add documentation and cleanup DMUB HW lock manager
- Add new types to replay config
- Fix HWSS v3 fast path determination
- Add missing DCCG register entries for DCN20-DCN316
- Add ESD detection for replay recovery
- Update underflow detection
- Add COLOR_ENCODING/COLOR_RANGE to overlay planes
- Add NV12/P010 formats to primary plane
- Set chroma taps to 1 if luma taps are 1
- Add min clock init for DML21 mode programming
- Return early from vesa replay enable function
- Clean up NULL pointer warnings in dml2
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch provides a bulk merge to align driver
support for DCN42 with Display Core version 3.2.373.
It includes upgrade for:
- clk_mgr
- dml2/dml21
- optc
- hubp
- mpc
- optc
- hwseq
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DML support for DCN 4.2
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for DCN 4.2 clock manager.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Silence warning by cleaning up unused code.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Clay King <clayking@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Add back some missing memory type in window_memory_type.
It should be aligned with enum dmub_window_id.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
On DCN21, dccg2_init() is called in dcn10_init_hw() before
bios_golden_init(). During S0i3 resume, BIOS sets MICROSECOND_TIME_BASE_DIV
to 0x00120464 as a marker. dccg2_init() overwrites this to 0x00120264,
causing dcn21_s0i3_golden_init_wa() to misdetect the state and skip golden
init.
Eventually during the resume sequence, a flip timeout occurs.
[HOW]
Skip DCCG on dccg2_is_s0i3_golden_init_wa_done() on DCN21.
Fixes: 4c595e7511 ("drm/amd/display: Migrate DCCG registers access from hwseq to dccg component.")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To document how the helpers should be used before a subsequent change
adds new locations that these helpers will be used.
Reviewed-by: Ovidiu (Ovi) Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We're checking surface and stream updates after they've been applied to
their respective states within `update_planes_and_stream_state`.
Medium updates under the HWSS V3 fast path that are not supported or
tested are getting implicitly if they don't trigger a DML validation
and getting updated in place on the dc->current_state context.
[HOW]
Fix this issue by moving up the fast path determination check prior
to `update_planes_and_stream_state`. This is how the V2 path works
and how the V3 path used to work prior to the refactors in this area.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 4c595e7511 ("drm/amd/display: Migrate DCCG registers access
from hwseq to dccg component.") moved register writes from hwseq to
dccg2_*() functions but did not add the registers to the DCCG register
list macros. The struct fields default to 0, so REG_WRITE() targets
MMIO offset 0, causing a GPU hang on resume (seen on DCN21/DCN30
during IGT kms_cursor_crc@cursor-suspend).
Add
- MICROSECOND_TIME_BASE_DIV
- MILLISECOND_TIME_BASE_DIV
- DCCG_GATE_DISABLE_CNTL
- DCCG_GATE_DISABLE_CNTL2
- DC_MEM_GLOBAL_PWR_REQ_CNTL
to macros in dcn20_dccg.h, dcn301_dccg.h, dcn31_dccg.h, and dcn314_dccg.h.
Fixes: 4c595e7511 ("drm/amd/display: Migrate DCCG registers access from hwseq to dccg component.")
Reported-by: Rafael Passos <rafael@rcpassos.me>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[HOW]
Add Replay recovery flow so that when HPD occurs and ESD is detected,
Replay can restore the system back to normal.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Robin Chen <robin.chen@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Weiguang Li <wei-guang.li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Add underflow detection for later ASICs.
Reviewed-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Extend COLOR_ENCODING and COLOR_RANGE property creation to overlay
planes in addition to primary planes. This allows overlay planes to
use YUV formats with proper color space configuration when the
hardware supports NV12/P010 formats.
These properties control the YUV-to-RGB conversion matrix selection
(BT.601/BT.709/BT.2020) and range handling (limited/full range).
Assisted-by: Claude: claude-sonnet-4.5
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add NV12, NV21, and P010 YUV formats to the primary plane's supported
format list, enabling YUV content to be scanned out directly from the
primary plane.
Assisted-by: Claude: claude-sonnet-4.5
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When luma is unscaled we also want chroma to be pixel-perfect.
When luma taps are > 1 the result will be a blurred luma plane,
even when the image isn't scaled.
This makes IGT tests for CSC colorop pass.
Assisted-by: Claude: claude-sonnet-4.5
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
0 stream cases do not go through any DML validation which leaves DCN
clocks in unoptimized states.
If requesting DML validation or programming with 0 streams, program
DCN clocks to lowest DPM state.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
If the enable state is already as expect then just return.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit addresses multiple warnings by adding defensive
checks for NULL pointers before dereferencing them. The changes ensure
that pointers such as are validated, preventing potential undefined
behavior.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Debugfs files for amdgpu are better to be handled in the dedicated
amdgpu_debugfs.c/.h files.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clean up the amdgpu_userq_create function clean up in
failure condition using goto method. This avoid replication
of cleanup for every failure condition.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The userq create path publishes queues to global xarrays such as
userq_doorbell_xa and userq_xa before creation was fully complete.
Later on if create queue fails, teardown could free an already
visible queue, opening a UAF race with concurrent queue walkers.
Also calling amdgpu_userq_put in such cases complicates the cleanup.
Solution is to defer queue publication until create succeeds and no
partially initialized queue is exposed.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
get_checkpoint_info() in kfd_mqd_manager_v9.c finds 32-bit value
ctl_stack_size by multiplying two 32-bit values. This can overflow to a
lower value, which could result in copying outside the bounds of
a buffer in checkpoint_mqd() in the same file.
Put in a check for the overflow, and fail with -EINVAL if detected.
v2: use check_mul_overflow()
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Below is the warning thrown by the clang compiler:
linux/drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_process.c:588:9: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
stats_dir_filename);
^~~~~~~~~~~~~~~~~~
linux/drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_process.c:588:9: note: treat the string as an argument to avoid this
stats_dir_filename);
^
"%s",
linux/drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_process.c:635:18: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
p->kobj, counters_dir_filename);
^~~~~~~~~~~~~~~~~~~~~
linux/drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_process.c:635:18: note: treat the string as an argument to avoid this
p->kobj, counters_dir_filename);
^
"%s",
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
CC: Philip Yang <philip.yang@amd.com>
CC: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
linux/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:2358:24: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
sprintf(ring->name, amdgpu_sw_ring_name(i));
^~~~~~~~~~~~~~~~~~~~~~
linux/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:2358:24: note: treat the string as an argument to avoid this
sprintf(ring->name, amdgpu_sw_ring_name(i));
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable aid/xcd/hbm temperature reporting for smu_v13_0_12 via gpu
metrics
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add aid, xcd & hbm temperatures to gpu metrics for smu_v13_0_12
v2: Use correct umc control per stack (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is the best way to describe the GPU to a tool loading
the devcoredump.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
