Bandwidth parameters for Xe3p_LPD are the same as for Xe3_LPD. Re-use
them.
Since handling for Xe3_LPD version 30.02 is more like a special case,
let's use a "== 3002" check for it inside the ">= 30" branch instead of
adding a new branch for version 35. That allows us to re-use the ">=
30" branch for Xe3p_LPD.
v2:
- Do not have a special case for ecc_impacting_de_bw, since there are
no specific instructions in Bspec for this scenario. (Matt Roper)
v3:
- Re-use the ">= 30" branch in the if-ladder. (Matt Roper)
Bspec: 68859
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-4-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Looking at the current if-ladder in intel_bw_init_hw(), we see that
Xe2_HPD contains two entries, differing only for ECC memories. Let's
improve readability by using braces and allowing adding extra conditions
for each case.
v2:
- Tweaked commit message, since we are not going to add the ECC case
for Xe3p_LPD anymore.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-3-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
The NDE_RSTWRN_OPT has been removed on Xe3p platforms and reset option
programming is no longer necessary during display init.
Bspec: 68846, 69137
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-2-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Xe3p_LPD (display version 35) is similar to Xe2_LPD with respect to the
features described by struct intel_display_device_info, so reuse its
device descriptor.
v2:
- Add reference to Bspec 74201. (Shekhar)
Bspec: 74201, 74304
Signed-off-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-1-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Fixes two issues in intel_pipedmc_irq_handler():
- Removed an extra ']' in the PIPEDMC error and interrupt vector log.
- Corrected the interrupt vector log to print int_vector instead of tmp,
as tmp will be zero in this case.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251103132337.762156-1-alok.a.tiwari@oracle.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Expose key Type-C port data in i915_display_info to make it easier to
understand the port configuration and active mode, especially whether
the link is in DP-Alt or TBT-Alt, without having to scan kernel logs.
Tested in DP-Alt, TBT-Alt, SST, and MST.
Expected output:
[CONNECTOR:290:DP-2]: status: connected
TC Port: E/TC#2 mode: tbt-alt pin assignment: - max lanes: 4
physical dimensions: 600x340mm
...
[CONNECTOR:263:DP-5]: status: connected
TC Port: G/TC#4 mode: dp-alt pin assignment: C max lanes: 4
physical dimensions: 610x350mm
v2: Use drm_printer (Ville)
Lock/Unlock around the printf (Imre)
v3: Forward Declaration drm_printer struct (Jani)
v4: Handle MST connector with no active encoder (Imre)
Add a delimiter between fields and ":" after the port name (Imre)
v5: Init dig_port and use it in intel_encorder_is_tc and tc_info (Imre)
Move tc->port_name to a newline (Imre)
v6: Use intel_tc_port_lock/Unlock (Imre)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251028190753.3089937-1-khaled.almahallawy@intel.com
Start using display parent interface for i915 runtime pm. Doing the same
for xe is done in coming changes.
v3:
- remove useless include
v2:
- use <> when including drm/intel/display_parent_interface.h
- drop checks for validity of rpm function pointers
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patch.msgid.link/20251030202836.1815680-6-jouni.hogander@intel.com
Implement runtime pm wrappers for xe driver and add them into display
parent interface.
v3:
- drop useless include
- drop xe_display_rpm_{get, put}_raw
v2:
- move xe_display_rpm_interface code into xe_display_rpm.c
- rename xe_rpm as xe_display_rpm
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patch.msgid.link/20251030202836.1815680-5-jouni.hogander@intel.com
We have differing implementations for display runtime pm in i915 and xe
drivers. Add struct of function pointers into display_parent_interface
which will contain used implementation of runtime pm.
v2:
- add _interface suffix to rpm function pointer struct
- add struct ref_tracker forward declaration
- use kernel-doc comments
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patch.msgid.link/20251030202836.1815680-3-jouni.hogander@intel.com
Let's gradually start calling i915 and xe parent, or core, drivers from
display via function pointers passed at display probe.
Going forward, the struct intel_display_parent_interface is expected to
include const pointers to sub-structs by functionality, for example:
struct intel_display_rpm {
struct ref_tracker *(*get)(struct drm_device *drm);
/* ... */
};
struct intel_display_parent_interface {
/* ... */
const struct intel_display_rpm *rpm;
};
This is a baby step towards not building display as part of both i915
and xe drivers, but rather making it an independent driver interfacing
with the two.
v3: useless include additions dropped
v2: unrelated include removal dropped
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patch.msgid.link/20251030202836.1815680-2-jouni.hogander@intel.com
From XE3P we can now poll if the AUX power is up or down define the
timeouts for each respectively.
Bspec: 68967
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-25-suraj.kandpal@intel.com
We need to enable and disable the Tx for each active lane after the
Non-TBT enable sequence is done.
Bspec: 74500, 74497, 74701
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-21-suraj.kandpal@intel.com
Program LT Phy voltage swing using the Swing tables and plug in the
function at encoder->set_signal_level
Bspec: 74493
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-20-suraj.kandpal@intel.com
Hook up the LT Phy enable and disable sequences using encoder->
enable/disable_clock and reusing the TBT enable disable sequence from
cx0 PHY since it remains the same.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-18-suraj.kandpal@intel.com
Program in the steps for Non TBT PLL disable sequence.
The whole function can be defined in one shot since most of
prequiste functions are already coded in.
Bspec: 74492
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-17-suraj.kandpal@intel.com
Program the rest of the LT Phy Non TBT PLL Enable sequence. This
can be done in a single patch since the rest of the prequistie
functions are already coded in.
Bspec: 74492, 69701
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-16-suraj.kandpal@intel.com
Program the LT PHY P2P transaction which uses P2M cycle to get
get data fro Phy when it is ready and then go read the MAC register
from the MAC address space.
Bspec: 68966, 74497, 74483, 74500
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-14-suraj.kandpal@intel.com
Create a reverse algorithm which is used to find port clock
from the LT PHY state is provided which is used for
comparision & verification functions.
Bspec: 74667
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-13-suraj.kandpal@intel.com
We enable SSC when we program PORT_CLOCK_CTL register. We logically
determine if ssc is enabled or not while we calculate our state.
Bspec: 74492, 74667
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-12-suraj.kandpal@intel.com
When we get the eDP tables we reuse dp tables for some data rates.
We need to modify the 3rd config value of this table to 1 instead
of 0 since that is the only difference in the dp and edp table for
that particular data rate.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-11-suraj.kandpal@intel.com
Fetch the tables which need to be used and program it in
the specified VDR register space. Everything is done over
the respective lanes.
Bspec: 68862, 74500
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-10-suraj.kandpal@intel.com
Add the LT Phy programming recipe tables for eDP, DP & HDMI and a
function to use the correct table.
Bspec: 74667
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-9-suraj.kandpal@intel.com
Read PHY_VDR_0_CONFIG to check if there is any change in the register and
decide based on that if P2P sequence to change the data rate of LT PHY
are required or not. This scenario only happens if the requested mode
uses 1.62Gbps with DP mode since LT PHY defaults to this mode if
any other mode is requested we need to follow the whole sequence.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-8-suraj.kandpal@intel.com
Add a wrapper on cx0 powerdown change sequence for LT Phy usage,
as the sequence remains unchanged when going from SNPS Phy to
LT Phy.
Bspec: 74495
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-7-suraj.kandpal@intel.com
Program sequence from port clock ctl except for the SSC
enablement part which will be taken care of later.
Bspec: 74492
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-6-suraj.kandpal@intel.com
Define function to bring phy lane out of reset for LT Phy and the
corresponding pre-requisite steps before we follow the steps for
Phy lane reset. Also create a skeleton of LT PHY PLL enable sequence
function in which we can place this function
Bspec: 77449, 74749, 74499, 74495, 68960
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-4-suraj.kandpal@intel.com
Change the register bit naming for powerdown values from CX0 to
XELPDP so that it can be used with LT Phy too.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-3-suraj.kandpal@intel.com
There is a hw restriction that we could enable the FBC for FP16
formats only if the pixel normalization block is enabled. Hence
enable the pixel normalizer block with normalzation factor as
1.0 for the supported FP16 formats to get the FBC enabled. Two
existing helper function definitions are moved up to avoid the
forward declarations as part of this patch as well.
v2: sw/hw state differentiation on handling pixel normalizer (Jani)
Bspec: 69863, 68881
Cc: Shekhar Chauhan <shekhar.chauhan@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20251027134001.325064-5-vinod.govindapillai@intel.com
As the pixel normalizer block is needed only for the FP16 formats,
separating out the FP16 formats handling will benefit in selectively
enabling the pixel normalizer block in the following patch.
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20251027134001.325064-4-vinod.govindapillai@intel.com
Add supported FP16 formats for FBC. FBC can be enabled with
FP16 formats only when plane pixel normalizer block is enabled.
The follow up patches will handle the pixel normalizer block
configuration.
v2: changes related to comments to use better tracking of pixel
normalizer
Bspec: 6881, 69863, 68904
Cc: Shekhar Chauhan <shekhar.chauhan@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20251027134001.325064-3-vinod.govindapillai@intel.com
Starting Xe3p_LPD, FBC is supported on UINT16 formats as well. Also
UINT16 being a 64bpp format, will use cpp of 8 for cfb stride and thus
size calculations.
v2: simplify getting the cpp per format (Ville)
simplify the pixel format is valid for xe3p_lp (Vinod)
Cc: Shekhar Chauhan <shekhar.chauhan@intel.com>
BSpec: 68881, 68904, 69560
Signed-off-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20251027134001.325064-2-vinod.govindapillai@intel.com
Reduce the compat i915_utils.h to only cover the requirements of
MISSING_CASE() in soc/ and the few i915_inject_probe_failure()
instances, instead of including the entire i915_utils.h from i915. This
prevents new users for the utilities from cropping up.
With this, we can remove the xe/display/ext/i915_utils.c altogether.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patch.msgid.link/c02f82e45f31caf95bd1339080b9099c3b7190be.1761146196.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The remaining utils display needs from i915_utils.h are primarily
MISSING_CASE() and fetch_and_zero(), with a couple of
i915_inject_probe_failure() uses.
To avoid excessive churn, add duplicates of MISSING_CASE() and
fetch_and_zero() to intel_display_utils.h, and switch display to use the
display utils.
As long as there are display files that include i915_drv.h, which
includes i915_utils.h, we'll need #ifndef guards for MISSING_CASE() and
fetch_and_zero() in both utils headers. We can remove them once display
no longer depends on i915_drv.h.
A couple of files in display still need i915_utils.h for
i915_inject_probe_failure(). Annotate this. They will be handled
separately.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patch.msgid.link/79f9e31ca64c8c045834d48e20ceb0c515d1e9e1.1761146196.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add intel_display_utils.c for display utilities that need more than a
header.
Start off with intel_display_run_as_guest(). The implementation is
intentional duplication of the i915_utils.h i915_run_as_guest(), with
the idea that it's small enough to not matter.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patch.msgid.link/469f9c41e0c3e3099314a3cf1a7671bf36ec8ffd.1761146196.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add i915_jiffies.h and intel_display_jiffies.h for jiffies timeout and
wait helpers, and use them separately from i915 and display. This helps
reduce the display dependency on i915_utils.h.
Long term, both msecs_to_jiffies_timeout() and
wait_remaining_ms_from_jiffies() really belong in core kernel headers,
but for now unblock display refactoring.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patch.msgid.link/d8bc62b3a81afa05c849dde9b0f633572eaf5611.1761146196.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This might help debug issues better than just debug logging the function
name.
v2: Debug log type as hex (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251029084603.2254982-2-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We might be getting send packet sequence errors and never know. Log them
as errors. Also upgrade the not supported read commands to errors.
v2: Also error log -EOPNOTSUPP (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251029084603.2254982-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Expose the drm crtc sharpness strength property which will enable
or disable the sharpness/casf based on user input. With this user
can set/update the strength of the sharpness or casf filter.
v2: Update subject[Ankit]
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20251028120747.3027332-11-ankit.k.nautiyal@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
