On configs with CONFIG_BPF=y but CONFIG_BPF_SYSCALL=n (e.g. arm
multi_v7_defconfig), kernel/bpf/core.c defines a __weak
bpf_arena_handle_page_fault() while bpf_defs.h already supplies a static
inline stub for it, causing a redefinition error. Build the __weak
definition only under CONFIG_BPF_SYSCALL, matching the bpf_defs.h
declaration and the CONFIG_BPF_SYSCALL-gated strong definition in arena.c.
Fixes: dc11a4dba2 ("bpf: Recover arena kernel faults with scratch page")
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20260527192632.2109419-1-tj@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tejun Heo says:
====================
This makes BPF arena memory directly dereferenceable from kernel code
(struct_ops callbacks, kfuncs). Each arena gets a per-arena scratch page
that an arch fault hook installs into empty PTEs on kernel-side faults,
after KFENCE. The faulting instruction retries and the violation is reported
through the program's BPF stream.
v4:
- Patch 1: note that the strict-zero cmpxchg is narrower than pte_none() in
inline comments on both x86 and arm64. (Andrea)
- Patch 2: stub bpf_arena_handle_page_fault() for !CONFIG_BPF_SYSCALL via a
new include/linux/bpf_defs.h. (lkp)
- Patch 7: scx_arena_alloc() retries via a loop instead of a single retry on
pool growth. (Andrea)
- Picked up Reviewed-by tags from Emil and Andrea.
v3: https://lore.kernel.org/r/20260520235052.4180316-1-tj@kernel.org
v2: https://lore.kernel.org/r/20260517211232.1670594-1-tj@kernel.org
v1 (RFC): https://lore.kernel.org/r/20260427105109.2554518-1-tj@kernel.org
Motivation
----------
sched_ext's ops_cid.set_cmask() hands the BPF scheduler a struct scx_cmask
*. The kernel translates a kernel cpumask to a cmask, but it had no way to
write into the arena, so the cmask lived in kernel memory and was passed as
a trusted pointer. BPF cmask helpers all operate on arena cmasks though, so
the BPF side had to word-by-word probe-read the kernel cmask into an arena
cmask via cmask_copy_from_kernel() before any helper could touch it. It
works, but is clumsy.
The shape isn't unique to set_cmask. Sub-scheduler support is on the way and
more sched_ext callbacks will want to pass structured data to BPF. Anywhere
a kfunc or struct_ops callback wants to hand a struct to a BPF program,
arena residence is the natural answer.
Approach
--------
Each arena gets a per-arena scratch page. Arenas stay sparsely mapped as
today - PTEs are populated only for allocated pages. A new arch fault hook
(bpf_arena_handle_page_fault) is wired into x86 page_fault_oops() and arm64
__do_kernel_fault(), after KFENCE. When a kernel-side access faults inside
an arena's kern_vm range, the helper walks the stack to find the BPF program
responsible, range-checks the fault address against prog->aux->arena, and
atomically installs the scratch page into the empty PTE via the new
ptep_try_set() wrapper. The kernel instruction retries and reads/writes the
scratch page. Free paths and map destruction treat scratch as non-owned.
Real allocation refuses to overwrite scratch (apply_range_set_cb returns
-EBUSY). A scratched address stays dead until map destroy, since its
presence means the BPF program has already malfunctioned.
The mechanism is default behavior - no UAPI flag.
What this preserves
-------------------
All the debugging properties of today's sparse-PTE design are preserved:
* BPF programs still fault on unmapped arena accesses. The fault semantics
(instruction retry with rdst = 0) and the violation report through
bpf_streams are unchanged for prog-side accesses.
* The first kernel-side touch of an unmapped address is reported via
bpf_streams the same way as a prog-side fault, with the stack walk
attributing it to the originating prog.
* User-side fault on a never-scratched address still lazy-allocates a real
page (or returns SIGSEGV under BPF_F_SEGV_ON_FAULT). User-side fault on a
scratched address SIGSEGVs.
What changes for the kernel-side caller is just that an unmapped deref no
longer oopses - it retries through the scratch page and emits a violation
report. The same shape today's BPF instruction faults have.
Patches 1-2 (atomic PTE install + arena scratch-page recovery)
--------------------------------------------------------------
mm: Add ptep_try_set() for lockless empty-slot installs
bpf: Recover arena kernel faults with scratch page
Patches 3-5 (helpers used by struct_ops registration)
-----------------------------------------------------
bpf: Add sleepable variant of bpf_arena_alloc_pages for kernel callers
bpf: Add bpf_struct_ops_for_each_prog()
bpf/arena: Add bpf_arena_map_kern_vm_start() and bpf_prog_arena()
====================
Link: https://lore.kernel.org/bpf/20260522172219.1423324-1-tj@kernel.org/
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
struct bpf_arena is opaque to callers outside arena.c. Add two helpers
for struct_ops subsystems that need to reach into an arena:
bpf_arena_map_kern_vm_start(struct bpf_map *map)
returns @map's kern_vm_start. A sched_ext follow-up needs this
to translate kern_va <-> uaddr.
bpf_prog_arena(struct bpf_prog *prog)
returns the bpf_map of the arena referenced by @prog (NULL if
@prog references no arena). The verifier enforces at most one
arena per program. Used by struct_ops callers that auto-discover
an arena from a member prog and need to take a map reference.
Suggested-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260522172219.1423324-6-tj@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a helper that walks the member progs of the struct_ops map
containing a given @kdata vmtable. struct_ops ->reg() callbacks (and
similar) sometimes need to inspect the loaded BPF programs, e.g. to
discover maps they reference via prog->aux->used_maps.
The implementation mirrors bpf_struct_ops_id(): container_of @kdata
to recover the bpf_struct_ops_map, then iterate st_map->links[i]->prog
for i in [0, funcs_cnt). Same access pattern, no new locking - by the
time ->reg() fires st_map is fully populated and stable.
A sched_ext follow-up walks the member progs of a cid-form scheduler's
struct_ops map, reads prog->aux->arena directly, and requires all member
progs to reference exactly one arena, without requiring the BPF program
to call a registration kfunc.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260522172219.1423324-5-tj@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The existing kernel-side export of bpf_arena_alloc_pages is _non_sleepable
only - it's used by the verifier to inline the kfunc when the call site is
non-sleepable. There is no sleepable equivalent for kernel callers. The
kfunc bpf_arena_alloc_pages itself is BPF-only.
sched_ext needs sleepable kernel-side allocs for its arena pool init/grow
paths. Add bpf_arena_alloc_pages_sleepable() mirroring the _non_sleepable
wrapper but passing sleepable=true to arena_alloc_pages().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260522172219.1423324-4-tj@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF arena usage is becoming more prevalent, but kernel <-> BPF communication
over arena memory is awkward today. Data has to be staged through a trusted
kernel pointer with extra code and copying on the BPF side. While reads
through arena pointers can use a fault-safe helper, writes don't have a good
solution. The in-line alternative would need instruction emulation or asm
fixup labels.
Enable direct kernel-side reads and writes within GUARD_SZ / 2 of any
handed-in arena pointer, without bounds checking. A per-arena scratch page
is installed by the arch fault path into empty arena kernel PTEs - x86 from
page_fault_oops() for not-present faults, arm64 from __do_kernel_fault() for
translation faults, both after the existing exception-table and KFENCE
handling. The faulting instruction retries and the access is also reported
through the program's BPF stream, preserving error reporting.
bpf_prog_find_from_stack() resolves the current BPF program (and its arena)
from the kernel stack - no new bpf_run_ctx state is added. Recovery covers
the 4 GiB arena plus the upper half-guard (GUARD_SZ / 2). The lower
half-guard is excluded because well-behaved kfuncs only access forward from
arena pointers. The kfunc-author contract - access at most GUARD_SZ / 2 past
a handed-in pointer - is documented in Documentation/bpf/kfuncs.rst.
The install is lock-free via ptep_try_set(). On race-loss the winning
installer's PTE is already valid, so the access retry succeeds. The arena
clear path uses ptep_get_and_clear() so installer and clearer race through
atomic accessors. No flush_tlb_kernel_range() afterwards. Stale "not mapped"
entries just cause one extra re-fault, cheaper than a global IPI on every
install.
Scratch exists only to keep the kernel from oopsing on an in-line arena
access. Its presence at a PTE means the BPF program has already
malfunctioned, and the violation is reported through the program's BPF
stream. The only requirement for behavior on a scratched PTE is that the
kernel doesn't crash. In particular, any user-side access through such a PTE
may segfault. The shared scratch page is freed once during map destruction.
BPF instruction faults continue to use the existing JIT exception-table
path. This patch changes only the kernel-text fault path. No UAPI flag is
added. The new behavior is the default.
v2: Use ptep_get_and_clear() in apply_range_clear_cb(). (David)
v3: Stub bpf_arena_handle_page_fault() for !CONFIG_BPF_SYSCALL. (lkp)
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Cc: David Hildenbrand <david@kernel.org>
Link: https://lore.kernel.org/r/20260522172219.1423324-3-tj@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add three kfuncs for BPF linked list queries:
- bpf_list_is_first(head, node): true if node is the first in the list.
- bpf_list_is_last(head, node): true if node is the last in the list.
- bpf_list_empty(head): true if the list has no entries.
Currently, without these kfuncs, to implement the above functionality
it is necessary to first call bpf_list_pop_front/back to retrieve the
first or last node before checking whether the passed-in node was the
first or last one. After the check, the node had to be pushed back into
the list using bpf_list_push_front/back, which was very inefficient.
Now, with the bpf_list_is_first/last/empty kfuncs, we can directly
check whether a node is the first, last, or whether the list is empty,
without having to first retrieve the node.
Signed-off-by: Kaitao Cheng <chengkaitao@kylinos.cn>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260521032306.97118-8-kaitao.cheng@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a new kfunc bpf_list_add(head, new, prev, meta, off) that
inserts 'new' after 'prev' in the BPF linked list. Both must be in
the same list; 'prev' must already be in the list. The new node must
be an owning reference (e.g. from bpf_obj_new); the kfunc consumes
that reference and the node becomes non-owning once inserted.
We have added an additional parameter bpf_list_head *head to
bpf_list_add, as the verifier requires the head parameter to
check whether the lock is being held.
Returns 0 on success, -EINVAL if 'prev' is not in a list or 'new'
is already in a list (or duplicate insertion). On failure, the
kernel drops the passed-in node.
Signed-off-by: Kaitao Cheng <chengkaitao@kylinos.cn>
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260521032306.97118-7-kaitao.cheng@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Refactor __bpf_list_add to accept (node, head, struct list_head **prev_ptr,
..) instead of (node, head, bool tail, ..). Load prev from *prev_ptr after
INIT_LIST_HEAD(h), so we never dereference an uninitialized h->prev when
head was 0-initialized (e.g. push_back passes &h->prev).
When prev is not the list head, validate that prev is in the list via
its owner.
Prepares for bpf_list_add(head, new, prev, ..) to insert after a given
list node.
Signed-off-by: Kaitao Cheng <chengkaitao@kylinos.cn>
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260521032306.97118-6-kaitao.cheng@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow users to remove any node from a linked list.
We have added an additional parameter bpf_list_head *head to
bpf_list_del, as the verifier requires the head parameter to
check whether the lock is being held.
Signed-off-by: Kaitao Cheng <chengkaitao@kylinos.cn>
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260521032306.97118-5-kaitao.cheng@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
KF_ARG_PTR_TO_LIST_NODE normally requires an owning reference
(PTR_TO_BTF_ID | MEM_ALLOC with ref_obj_id). Introduce the
__nonown_allowed annotation on selected list-node arguments so
non-owning references with ref_obj_id==0 are accepted as well.
This patch only adds the generic verifier support and documents the
annotation. Later patches in the series will apply it to bpf_list_add
/del(), and bpf_list_is_first/last(), allowing bpf_list_front/back()
results to be used as the insertion point, deletion target, or query
target for those kfuncs.
Verifier keeps existing owning-ref checks by default; only arguments
annotated with __nonown_allowed bypass MEM_ALLOC/ref_obj_id checks
and then follow the same list-node validation path.
Signed-off-by: Kaitao Cheng <chengkaitao@kylinos.cn>
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260521032306.97118-4-kaitao.cheng@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The issue only becomes exposed once bpf_list_del() is available: callers
can pass an arbitrary bpf_list_head and bpf_list_node pair, including
nodes that are not actually linked to the supplied head, or nodes that
outlive their original head after refcount-based retention. This was
not practically reachable for callers restricted to pop-style helpers
alone; bpf_list_del() widens the API surface.
A failure mode appears when bpf_list_head_free() runs while a program
still holds an independent refcount on a node (for example via
bpf_refcount_acquire()). The list head value embedded in map memory can
go away while the node object survives. If node->owner is left pointing
at the old head address until drop completes, that pointer becomes stale.
If a new bpf_list_head is later allocated at the same address and the
stale node is passed to bpf_list_del(), the owner comparison can succeed
even though the node is not really linked to the new head, and
list_del_init() will follow bogus next/prev pointers with the risk of
memory corruption.
When draining a bpf_list_head, mark each node owner with BPF_PTR_POISON
under the map spinlock while moving it to a private drain list, then
list_del_init() the node and clear owner to NULL before calling
__bpf_obj_drop_impl(). Concurrent readers therefore never observe a
node that appears linked to a head while its list_head is inconsistent,
and surviving refcounted nodes never retain a stale non-NULL owner.
Signed-off-by: Kaitao Cheng <chengkaitao@kylinos.cn>
Link: https://lore.kernel.org/r/20260521032306.97118-3-kaitao.cheng@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Refactor __bpf_list_del to accept (head, struct list_head *n) instead of
(head, bool tail). The caller now passes the specific node to remove:
bpf_list_pop_front passes h->next, bpf_list_pop_back passes h->prev.
Prepares for introducing bpf_list_del(head, node) kfunc to remove an
arbitrary node when the user holds ownership.
Signed-off-by: Kaitao Cheng <chengkaitao@kylinos.cn>
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260521032306.97118-2-kaitao.cheng@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
__bpf_dynptr_data() can return NULL (FILE dynptrs, any non-contiguous
backing). bpf_verify_pkcs7_signature() forwards the pointer to
verify_pkcs7_signature() unchecked, causing a NULL deref in
asn1_ber_decoder() reachable from a sleepable BPF LSM at lsm.s/bpf.
NULL-check both pointers and reject with -EINVAL. Mirrors the guards
already in kernel/bpf/crypto.c.
Fixes: 865b0566d8 ("bpf: Add bpf_verify_pkcs7_signature() kfunc")
Reported-by: Xianrui Dong <dongxianrui1@gmail.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20260520024059.313468-1-kpsingh@kernel.org
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Because of the 8-byte alignment, the compiler will pad struct
bpf_common_attr to 24 bytes. That said, sizeof(attr_common) is 24 instead
of 20.
When check tail zero using sizeof(attr_common) in
bpf_check_uarg_tail_zero(), there will be 4 bytes that won't be checked.
To also check the padding 4 bytes, replace sizeof(attr_common) with
offsetofend(struct bpf_common_attr, log_true_size).
Fixes: f28771c069 ("bpf: Extend BPF syscall with common attributes support")
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260518145446.6794-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When a main program with exception_boundary has outgoing stack
arguments (e.g. from calling subprogs with >5 args), bpf_throw() fails
to correctly restore callee-saved registers, causing a kernel crash.
The x86 JIT allocates the outgoing stack arg area below the
callee-saved registers via 'sub rsp, outgoing_rsp' in the prologue.
When bpf_throw() unwinds, it captures the main program's sp (which
includes this outgoing area) and passes it to the exception callback.
The callback gets rsp and rbp, followed by pop_callee_regs, but rsp
points into the outgoing arg area rather than the callee-saved
registers, so the pops restore garbage values. Returning to the
kernel with corrupted callee-saved registers causes a crash.
Fix this by adjusting the sp (adding stack_arg_sp_adjust) passed to
the exception callback, so it points to the bottom of the callee-saved
registers instead of the outgoing arg area. When stack_arg_sp_adjust
is 0 (the common case), this is a no-op.
Fixes: 324c3ca6ee ("bpf,x86: Implement JIT support for stack arguments")
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260517150702.288031-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Global subprogs are verified independently and are not descended into
when their callers are symbolically executed. This means a caller can
hold references or locks across a global subprog call that may throw,
while the verifier only checks the non-exceptional return path at the
call site.
Record whether a subprog might throw in the CFG summary pass, alongside
the existing might_sleep and packet-data-changing summaries, and
propagate that effect through reachable callees.
When a global subprog is marked as possibly throwing, push the normal
continuation and validate the exceptional path immediately at the call
site, avoiding a synthetic exception state and associated special case
in the pruning checks.
Fixes: f18b03faba ("bpf: Implement BPF exceptions")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260517075530.3461166-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Remove a redundant stack_arg_cnt check in __bpf_prog_select_runtime()
and start the stack arg loop from index 0 in bpf_fixup_call_args().
Both changes are no-ops that simplify the code:
In __bpf_prog_select_runtime(), the subprog_info[0].stack_arg_cnt
check is unreachable:
- when there is only a main program (no bpf-to-bpf calls),
subprog_info[0].stack_arg_cnt is always 0 because the main
program's arg_cnt is forced to 1
- when bpf-to-bpf calls use stack args and JIT succeeds,
fp->bpf_func is set and this code is skipped
- when JIT fails, bpf_fixup_call_args() rejects the program
before we get to __bpf_prog_select_runtime().
In bpf_fixup_call_args(), starting the loop at i=1 skipped subprog 0,
which is safe since the main program always has arg_cnt=1 and thus
bpf_in_stack_arg_cnt() returns 0. Starting at i=0 removes the need
to reason about this invariant.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260515225101.824054-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
arg_track_join() logs state transitions at CFG merge points. For
stack arg slots (r >= MAX_BPF_REG), it printed "r11:", "r12:", etc.,
which is misleading since r11 is a special register (BPF_REG_PARAMS)
not meaningful to the user.
Fix it to print "sa0:", "sa1:", etc., matching the per-instruction
transition log in arg_track_log() which already uses the "sa" prefix.
Update the existing stack_arg_pruning_type_mismatch selftest to expect
the corrected format.
Fixes: 2af4e79277 ("bpf: Extend liveness analysis to track stack argument slots")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260515225056.823086-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
btf_prepare_func_args() sets sub->arg_cnt before validating arg types.
If validation fails (e.g. unsupported pointer type in a static subprog),
check_outgoing_stack_args() is skipped because btf_check_func_arg_match()
returns early. For static subprogs, check_func_call() ignores non-EFAULT
errors and proceeds with the call.
This causes the callee to read stack arg slots that the caller never
stored or not initialized, potentially dereferencing NULL caller->stack_arg_regs
or getting no-initialized value.
To fix the issue, when btf_prepare_func_args() fails and the subprog expects
stack args, call check_outgoing_stack_args() to verify the caller initialized
the slots. Return -EFAULT on failure so the error is not ignored.
Fixes: 3ab5bd317e ("bpf: Set sub->arg_cnt earlier in btf_prepare_func_args()")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260515225040.821515-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Building without CONFIG_BPF_EVENTS produces a build-time
warning:
WARN: resolve_btfids: unresolved symbol bpf_session_is_return
The function is actually defined in kernel/trace/bpf_trace.o,
which is built conditionally based on configuration.
Make the reference to this function conditional as well,
as is already done in the bpf verifier for other functions.
Fixes: 8fe4dc4f64 ("bpf: change prototype of bpf_session_{cookie,is_return}")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20260515113242.2706303-1-arnd@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
percpu_array_map_ops.map_meta_equal points to the generic
bpf_map_meta_equal(), which does not compare max_entries. When a
percpu array serves as an inner map, replacing it with one that has
fewer max_entries bypasses the check. Since percpu_array_map_gen_lookup()
inlines the original template's index_mask as a JIT immediate, a lookup
on the replacement map can access pptrs[] out of bounds.
Point percpu_array_map_ops.map_meta_equal to array_map_meta_equal(),
which already enforces the max_entries equality check.
Add a selftest to verify that replacing a percpu array inner map with
a differently-sized one is rejected.
Fixes: db69718b8e ("bpf: inline bpf_map_lookup_elem() for PERCPU_ARRAY maps")
Signed-off-by: Guannan Wang <wgnbuaa@gmail.com>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260514074454.77491-1-wgnbuaa@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We've hit the 512 bytes limit on stack depth a few times in Cilium
recently. As a result, we started reporting in CI our current maximum
stack depth across all configurations for each BPF program.
Unfortunately, that is not trivial to compute in userspace. The
verifier reports the stack depths of individual subprogs at the end of
the logs. However the maximum combined stack depth also depends on the
callgraph of those subprogs (the max combined stack depth is the height
of the callgraph weighted by per-subprog stack depths). We can compute
a callgraph in userspace from the loaded instructions, but it often
doesn't match the verifier's own callgraph because of dead code
elimination. Our current approach relies on dumping the BPF_LOG_LEVEL2
logs, but this feels overkill considering the verifier already has the
information we need.
The patch lets the verifier dump the maximum combined stack depth in
the logs, on the same line as the per-subprog stack depths:
stack depth 16+256 max 272
The per-subprog stack depths and the new max stack depth are not
directly comparable. The former is sometimes updated during fixups,
while the latter is not. As a result, even with a single subprog, we
may end up with two slightly different values. The aim of the new max
value is to be closest to what is actually enforced by the verifier.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/d3d23a0410f87f116f3bbaa98a815dbae113bda2.1778700777.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add x86_64 JIT support for BPF functions and kfuncs with more than
5 arguments. The extra arguments are passed through a stack area
addressed by register r11 (BPF_REG_PARAMS) in BPF bytecode,
which the JIT translates to native code.
The JIT follows the x86-64 calling convention for both BPF-to-BPF
and kfunc calls:
- Arg 6 is passed in the R9 register
- Args 7+ are passed on the stack
Incoming arg 6 (BPF r11+8) is translated to a MOV from R9 rather
than a memory load. Incoming args 7+ (BPF r11+16, r11+24, ...) map
directly to [rbp + 16], [rbp + 24], ..., matching the x86-64 stack
layout after CALL + PUSH RBP, so no offset adjustment is needed.
tail_call_reachable is rejected by the verifier and priv_stack is
disabled by the JIT when stack args exist, so R9 is always
available. When BPF bytecode writes to the arg-6 stack slot
(offset -8), the JIT emits a MOV into R9 instead of a memory store.
Outgoing args 7+ are placed at [rsp] in a pre-allocated area below
callee-saved registers, using:
native_off = outgoing_arg_base - outgoing_rsp - bpf_off - 16
The native x86_64 stack layout with stack arguments:
high address
+-------------------------+
| incoming stack arg N | [rbp + 16 + (N-7)*8] (from caller)
| ... |
| incoming stack arg 7 | [rbp + 16]
+-------------------------+
| return address | [rbp + 8]
| saved rbp | [rbp]
+-------------------------+
| BPF program stack | (round_up(stack_depth, 8) bytes)
+-------------------------+
| callee-saved regs | (r12, rbx, r13, r14, r15 as needed)
+-------------------------+
| outgoing arg M | [rsp + (M-7)*8]
| ... |
| outgoing arg 7 | [rsp]
+-------------------------+ rsp
low address
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045122.2393118-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Other architectures like arm64, riscv, etc. have enough register
and for them private stack can be used together with
stack arguments.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045114.2392291-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tail calls are deprecated and will be replaced by indirect calls
in the future. Reject programs that combine tail calls with stack
arguments rather than adding complexity for a deprecated feature.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045109.2392108-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extend the stack argument mechanism to kfunc calls, allowing kfuncs
with more than 5 parameters to receive additional arguments via the
r11-based stack arg area.
For kfuncs, the caller is a BPF program and the callee is a kernel
function. The BPF program writes outgoing args at negative r11
offsets, following the same convention as BPF-to-BPF calls:
Outgoing: r11 - 8 (arg6), ..., r11 - N*8 (last arg)
The following is an example:
int foo(int a1, int a2, int a3, int a4, int a5, int a6, int a7) {
...
kfunc1(a1, a2, a3, a4, a5, a6, a7, a8);
...
kfunc2(a1, a2, a3, a4, a5, a6, a7, a8, a9);
...
}
Caller (foo), generated by llvm
===============================
Incoming (positive offsets):
r11+8: [incoming arg 6]
r11+16: [incoming arg 7]
Outgoing for kfunc1 (negative offsets):
r11-8: [outgoing arg 6]
r11-16: [outgoing arg 7]
r11-24: [outgoing arg 8]
Outgoing for kfunc2 (negative offsets):
r11-8: [outgoing arg 6]
r11-16: [outgoing arg 7]
r11-24: [outgoing arg 8]
r11-32: [outgoing arg 9]
Later JIT will marshal outgoing arguments to the native calling
convention for kfunc1() and kfunc2().
For kfunc calls where stack args are used as constant or size
parameters, a mark_stack_arg_precision() helper is used to propagate
precision and do proper backtracking.
There are two places where meta->release_regno needs to keep
regno for later releasing the reference. Also, 'cur_aux(env)->arg_prog = regno'
is also keeping regno for later fixup. Since stack arguments don't have a valid
register number (regno is negative), these three cases are rejected for now
if the argument is on the stack.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045104.2391543-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF_REG_PARAMS (r11) is used for stack argument accesses and
the following are only insns with r11 presence:
- load incoming stack arg
- store register to outgoing stack arg
- store immediate to outgoing stack arg
The detailed insn format can be found in is_stack_arg_ldx/st/stx()
helpers. After this patch, stack arg ldx/st/stx insns become valid
for kernel and these insns can be properly checked by verifier.
The LLVM compiler [1] implemented the above BPF_REG_PARAMS insns.
[1] https://github.com/llvm/llvm-project/pull/189060
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045059.2391192-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add bpf_jit_supports_stack_args() as a weak function defaulting to
false. Architectures that implement JIT support for stack arguments
override it to return true.
Reject BPF functions with more than 5 parameters at verification
time if the architecture does not support stack arguments.
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045054.2390945-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The interpreter does not understand the bpf register r11
(BPF_REG_PARAMS) used for stack arguments. So reject interpreter
usage if stack arguments are used either in the main program or
any subprogram.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045049.2390444-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF_REG_PARAMS (R11) is at index MAX_BPF_REG, which is beyond the
register tracking arrays in const_fold.c and liveness.c. Handle it
explicitly to avoid out-of-bounds accesses.
Extend the arg tracking dataflow to cover stack arg slots. Otherwise,
pointers passed through stack args are invisible to liveness, causing
the pointed-to stack slots to be incorrectly poisoned.
Extend the at_out tracking array to MAX_AT_TRACK_REGS (registers
plus stack arg slots) so that outgoing stack arg stores are tracked
alongside registers. Add a separate at_stack_arg_entry array in
compute_subprog_args(), passed to arg_track_xfer(), to restore
FP-derived values on incoming stack arg reads.
Extend record_call_access() to check stack arg slots for FP-derived
pointers at kfunc call sites, reusing the record_arg_access() helper
extracted in the previous patch. Pass stack arg state from caller to
callee in analyze_subprog() so that callees can track pointers received
through stack args, hence avoid poisoning.
Skip stack arg instructions in record_load_store_access(). Stack arg
STX uses dst_reg=BPF_REG_PARAMS (index 11), but at[11] is repurposed
to track the value stored in stack arg slot 0. Without the skip, if a
prior stack arg STX stored an FP-derived pointer (e.g., fp-64) into
slot 0, a subsequent stack arg STX would read that FP-derived value as
the base pointer and spuriously mark a regular stack slot (e.g., fp-72
from -64 + -8) as accessed in the liveness bitmap.
Extend arg_track_log() to log state transitions for outgoing stack arg
slots at indices MAX_BPF_REG through MAX_AT_TRACK_REGS-1. Without this,
changes to at_out[11..17] caused by stack arg store instructions are
silently omitted from BPF_LOG_LEVEL2 output. For example, when a
caller passes fp-64 through a stack argument:
subprog#0:
10: (bf) r6 = r10
11: (07) r6 += -64
12: (7b) *(u64 *)(r11 -8) = r6
sa0: none -> fp0-64
13: (85) call pc+5
Without the fix, the "sa0: none -> fp0-64" transition at insn 12
would not appear.
Extend print_subprog_arg_access() to include stack arg slots in the
per-instruction FP-derived state dump. For example:
subprog#0:
12: (7b) *(u64 *)(r11 - 8) = r6 // r6=fp0-64
13: (85) call pc+5 // r6=fp0-64 sa0=fp0-64
Without the fix, the "sa0=fp0-64" annotation at insn 13 would not
appear, making it harder to debug liveness analysis for programs
that pass FP-derived pointers through stack arguments.
Extend has_fp_args() to also check stack arg slots for FP-derived
pointers, so that callees receiving pointers only through stack args
are still recursively analyzed.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045043.2389049-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Replace "frame != ARG_NONE" with arg_is_fp() in has_fp_args().
The function's purpose is to check whether any argument is derived
from a frame pointer, which is exactly what arg_is_fp() tests
(frame >= 0 || frame == ARG_IMPRECISE). Using the dedicated
predicate is clearer and more consistent with the rest of the file.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045035.2388671-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extract the per-argument FP-derived pointer handling from
record_call_access() into a new record_arg_access() helper.
The existing loop body — checking arg_is_fp, querying stack access
bytes, and calling record_stack_access/record_imprecise — will be
reused for stack argument slots in the next patch. Factoring it out
now avoids duplicating the logic.
No functional change.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045030.2388067-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extend the precision marking and backtracking infrastructure to
support stack argument slots (r11-based accesses). Without this,
precision demands for scalar values passed through stack arguments
are silently dropped, which could allow the verifier to incorrectly
prune states with different constant values in stack arg slots.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045025.2387526-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move stack slot index (spi) and frame number out of the flags field
in bpf_jmp_history_entry into dedicated bitfields. This simplifies
the encoding and makes room for new flags.
Previously, spi and frame were packed into the lower 9 bits of the
12-bit flags field (3 bits frame + 6 bits spi), with INSN_F_STACK_ACCESS
at BIT(9) and INSN_F_DST/SRC_REG_STACK at BIT(10)/BIT(11).
But this has no room for an INSN_F_* flag for stack arguments.
To resolve this issue, bpf_jmp_history_entry field idx is narrowed to
20 bits (sufficient for insn indices up to 1M), and the freed bits hold
spi (6 bits) and frame (3 bits) as dedicated struct fields. The flags
enum is simplified accordingly:
INSN_F_STACK_ACCESS -> BIT(0)
INSN_F_DST_REG_STACK -> BIT(1)
INSN_F_SRC_REG_STACK -> BIT(2)
which allows more room for additional INSN_F_* flags.
bpf_push_jmp_history() now takes explicit spi and frame parameters
instead of encoding them into flags. The insn_stack_access_flags(),
insn_stack_access_spi(), and insn_stack_access_frameno() helpers are
removed.
No functional change.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045020.2385962-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently BPF functions (subprogs) are limited to 5 register arguments.
With [1], the compiler can emit code that passes additional arguments
via a dedicated stack area through bpf register BPF_REG_PARAMS (r11),
introduced in an earlier patch ([2]).
The compiler uses positive r11 offsets for incoming (callee-side) args
and negative r11 offsets for outgoing (caller-side) args, following the
x86_64/arm64 calling convention direction. There is an 8-byte gap at
offset 0 separating two regions:
Incoming (callee reads): r11+8 (arg6), r11+16 (arg7), ...
Outgoing (caller writes): r11-8 (arg6), r11-16 (arg7), ...
The following is an example to show how stack arguments are saved
and transferred between caller and callee:
int foo(int a1, int a2, int a3, int a4, int a5, int a6, int a7) {
...
bar(a1, a2, a3, a4, a5, a6, a7, a8);
...
}
Caller (foo) Callee (bar)
============ ============
Incoming (positive offsets): Incoming (positive offsets):
r11+8: [incoming arg 6] r11+8: [incoming arg 6] <-+
r11+16: [incoming arg 7] r11+16: [incoming arg 7] <-|+
r11+24: [incoming arg 8] <-||+
Outgoing (negative offsets): |||
r11-8: [outgoing arg 6 to bar] -------->-------------------------+||
r11-16: [outgoing arg 7 to bar] -------->--------------------------+|
r11-24: [outgoing arg 8 to bar] -------->---------------------------+
If the bpf function has more than one call:
int foo(int a1, int a2, int a3, int a4, int a5, int a6, int a7) {
...
bar1(a1, a2, a3, a4, a5, a6, a7, a8);
...
bar2(a1, a2, a3, a4, a5, a6, a7, a8, a9);
...
}
Caller (foo) Callee (bar2)
============ ==============
Incoming (positive offsets): Incoming (positive offsets):
r11+8: [incoming arg 6] r11+8: [incoming arg 6] <+
r11+16: [incoming arg 7] r11+16: [incoming arg 7] <|+
r11+24: [incoming arg 8] <||+
Outgoing for bar2 (negative offsets): r11+32: [incoming arg 9] <|||+
r11-8: [outgoing arg 6] ---->----------->-------------------------+|||
r11-16: [outgoing arg 7] ---->----------->--------------------------+||
r11-24: [outgoing arg 8] ---->----------->---------------------------+|
r11-32: [outgoing arg 9] ---->----------->----------------------------+
The verifier tracks outgoing stack arguments in stack_arg_regs[] and
out_stack_arg_cnt in bpf_func_state, separately from the regular
r10 stack. The callee does not copy incoming args — it reads them
directly from the caller's outgoing slots at positive r11 offsets.
Similar to stacksafe(), introduce stack_arg_safe() to do pruning
check.
Outgoing stack arg slots are invalidated when the callee returns
(e.g. in prepare_func_exit), not at call time. This allows the callee to
read incoming args from the caller's outgoing slots during
verification. The following are a few examples.
Example 1:
*(u64 *)(r11 - 8) = r6;
*(u64 *)(r11 - 16) = r7;
call bar1; // arg6 = r6, arg7 = r7
call bar2; // expected with 2 stack arguments, failed
Example 2:
To fix the Example 1:
*(u64 *)(r11 - 8) = r6;
*(u64 *)(r11 - 16) = r7;
call bar1; // arg6 = r6, arg7 = r7
*(u64 *)(r11 - 8) = r8;
*(u64 *)(r11 - 16) = r9;
call bar2; // arg6 = r8, arg7 = r9
Example 3:
The compiler can hoist the shared stack arg stores above the branch:
*(u64 *)(r11 - 16) = r7;
if cond goto else;
*(u64 *)(r11 - 8) = r8;
call bar1; // arg6 = r8, arg7 = r7
goto end;
else:
*(u64 *)(r11 - 8) = r9;
call bar2; // arg6 = r9, arg7 = r7
end:
Example 4:
Within a loop:
loop:
*(u64 *)(r11 - 8) = r6; // arg6, before loop
call bar; // reuses arg6 each iteration
if ... goto loop;
A separate max_out_stack_arg_cnt field in bpf_subprog_info tracks
the deepest outgoing slot actually written. This intends to
reject programs that write to slots beyond what any callee expects.
It is necessary for JIT.
Similar to typical compiler generated code, enforce the following
orderings:
- all stack arg reads must be ahead of any stack arg write
- all stack arg reads must be before any bpf func, kfunc and helpers
This is needed as JIT may emit 'mov' insns for read/write with
the same register and bpf function, kfunc and helper will invalidate
all arguments immediately after the call.
Callback functions with stack arguments need kernel setup parameter
types (including stack parameters) properly and then callback function
can retrieve such information for verification purpose.
Global subprogs and freplace with >5 args are not yet supported.
[1] https://github.com/llvm/llvm-project/pull/189060
[2] https://lore.kernel.org/bpf/20260423033506.2542005-1-yonghong.song@linux.dev/
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045015.2385013-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move the "sub->arg_cnt = nargs" assignment to immediately after
nargs is computed from btf_type_vlen(), instead of at the end of
btf_prepare_func_args().
btf_prepare_func_args() can return -EINVAL early in several cases,
e.g. when a static function has some non-int/enum arguments.
Since -EINVAL from btf_prepare_func_args() does not immediately
reject verification, arg_cnt remains zero after the early return.
This causes later stack argument based load/store insns to
incorrectly assume the function has no arguments.
Setting arg_cnt right after nargs ensures it is available regardless
of which path btf_prepare_func_args() takes.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045010.2384635-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Remove the copy_register_state() helper which was just a plain struct
assignment wrapper and replace all call sites with direct struct
assignment. This simplifies the code in preparation for upcoming stack
argument support.
No functional change.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260513045000.2382933-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Many BPF_MAP_CREATE validation failures currently return -EINVAL without
any explanation to userspace.
Plumb common syscall log attributes into map_create(), create a verifier
log from bpf_common_attr::log_buf/log_size/log_level, and report
map-creation failure reasons through that buffer.
This improves debuggability by allowing userspace to inspect why map
creation failed and read back log_true_size from common attributes.
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260512153157.28382-7-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF_BTF_LOAD can now take log parameters from both union bpf_attr and
struct bpf_common_attr, with the same merge rules as BPF_PROG_LOAD:
- if both sides provide a complete log tuple (buf/size/level) and they
match, use it;
- if only one side provides log parameters, use that one;
- if both sides provide complete tuples but they differ, return -EINVAL.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260512153157.28382-6-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF_PROG_LOAD can now take log parameters from both union bpf_attr and
struct bpf_common_attr. The merge rules are:
- if both sides provide a complete log tuple (buf/size/level) and they
match, use it;
- if only one side provides log parameters, use that one;
- if both sides provide complete tuples but they differ, return -EINVAL.
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260512153157.28382-5-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The next commit will add support for reporting logs via extended common
attributes, including 'log_true_size'.
To prepare for that, refactor the 'log_true_size' reporting logic by
introducing a new struct bpf_log_attr to encapsulate log-related behavior:
* bpf_log_attr_init(): initialize log fields, which will support
extended common attributes in the next commit.
* bpf_log_attr_finalize(): handle log finalization and write back
'log_true_size' to userspace.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260512153157.28382-4-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add generic BPF syscall support for passing common attributes.
The initial set of common attributes includes:
1. 'log_buf': User-provided buffer for storing logs.
2. 'log_size': Size of the log buffer.
3. 'log_level': Log verbosity level.
4. 'log_true_size': Actual log size reported by kernel.
The common-attribute pointer and its size are passed as the 4th and 5th
syscall arguments. A new command bit, 'BPF_COMMON_ATTRS' ('1 << 16'),
indicates that common attributes are supplied.
This commit adds syscall and uapi plumbing. Command-specific handling is
added in follow-up patches.
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260512153157.28382-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, the BPF instruction set allows bpf-to-bpf calls (or internal
calls, pseudo calls) to use a 32-bit imm field to represent the relative
jump offset.
However, when JIT is disabled or falls back to the interpreter, the
verifier invokes bpf_patch_call_args() to rewrite the call instruction.
In this function, the 32-bit imm is downcast to s16 and stored in the off
field.
void bpf_patch_call_args(struct bpf_insn *insn, u32 stack_depth)
{
stack_depth = max_t(u32, stack_depth, 1);
insn->off = (s16) insn->imm;
insn->imm = interpreters_args[(round_up(stack_depth, 32) / 32) - 1] -
__bpf_call_base_args;
insn->code = BPF_JMP | BPF_CALL_ARGS;
}
If the original imm exceeds the s16 range (i.e., a jump offset greater
than 32767 instructions), this downcast silently truncates the offset,
resulting in an incorrect call target.
Fix this by:
1. In bpf_patch_call_args(), keeping the imm field unchanged and using the
off field to store the index of the interpreter function.
2. In ___bpf_prog_run() for the JMP_CALL_ARGS case, retrieving the
interpreter function pointer from the interpreters_args array using the
off field as the index, and passing the original imm to calculate the
last argument of the interpreter function.
After these changes, the truncation issue is resolved, and __bpf_call_base_args
is also no longer needed and can be removed, which makes the code cleaner.
Performance: In ___bpf_prog_run() for the JMP_CALL_ARGS case, changing the
retrieval of the interpreter function pointer from pointer addition to
direct array indexing improves performance. The possible reason is that the
latter has better instruction-level parallelism. See the v5 discussion [1]
for more details.
[1] https://lore.kernel.org/bpf/f120c3c4-6999-414a-b514-518bb64b4758@zju.edu.cn/
To avoid requiring bpftool changes, keep the new imm/off encoding internal
and restore the legacy xlated dump layout in bpf_insn_prepare_dump().
For bpf-to-bpf call offsets that do not fit in s16, export off as 0 instead
of a truncated and misleading value.
Fixes: 1ea47e01ad ("bpf: add support for bpf_call to interpreter")
Fixes: 7105e828c0 ("bpf: allow for correlation of maps and helpers in dump")
Suggested-by: Xu Kuohai <xukuohai@huaweicloud.com>
Suggested-by: Puranjay Mohan <puranjay@kernel.org>
Co-developed-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Tianci Cao <ziye@zju.edu.cn>
Co-developed-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Yazhou Tang <tangyazhou518@outlook.com>
Link: https://lore.kernel.org/r/20260506094714.419842-3-tangyazhou@zju.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The interpreters_args array only accommodates stack depths up to
MAX_BPF_STACK (512 bytes). However, do_misc_fixups() may allow a larger
stack depth if JIT is requested.
If JIT compilation later fails and falls back to the interpreter, the
verifier invokes bpf_patch_call_args() with this oversized stack depth.
This causes a load-time out-of-bounds (OOB) read when calculating the
interpreter function pointer index.
Fix this by changing bpf_patch_call_args() to return an int and explicitly
rejecting the JIT fallback (returning -EINVAL) if the stack depth exceeds
MAX_BPF_STACK.
Fixes: 1ea47e01ad ("bpf: add support for bpf_call to interpreter")
Co-developed-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Tianci Cao <ziye@zju.edu.cn>
Co-developed-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Yazhou Tang <tangyazhou518@outlook.com>
Acked-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20260506094714.419842-2-tangyazhou@zju.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF_MAP_TYPE_ARENA accepts BPF_PSEUDO_MAP_VALUE offsets at exactly
the end of the arena mapping (off == arena_size). The boundary check
in arena_map_direct_value_addr() uses `>` instead of `>=`, which
incorrectly allows a one-past-end pointer to be accepted.
Change the condition to `>=` to correctly reject offsets that fall
outside the valid arena user_vm range.
Fixes: 317460317a ("bpf: Introduce bpf_arena.")
Signed-off-by: Junyoung Jang <graypanda.inzag@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260426172505.1947915-1-graypanda.inzag@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Because subprog 0, the main subprog, is considered a global function,
we end up running the arg-tracking dataflow analysis twice on it. That
results in slightly longer verification but mostly in more verbose
verifier logs. This patch fixes it by keeping only the iteration over
global subprogs.
When running over all of Cilium's programs with BPF_LOG_LEVEL2, this
reduces verbosity by ~20% on average.
Fixes: bf0c571f7f ("bpf: introduce forward arg-tracking dataflow analysis")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/e4d7b53d4963ef520541a782f5fc8108a168877c.1778176504.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When using global functions (i.e. subprogs), the verifier performs
function-by-function verification. In that case, the sum of the
instructions processed in each global function and in the main program
counts towards the 1 million instructions limit. Only that sum is
reported in the verifier logs.
While starting to use global functions in Cilium (finally!), we found it
can be useful to have the breakdown per global function, to understand
exactly where the budget is currently spent. This patch implements this
breakdown, under BPF_LOG_STATS, as done for the stack depths.
When iterating over subprogs, we need to skip the hidden subprogs at the
end because they don't have a corresponding func_info_aux entry and
calling bpf_subprog_is_global() would result in an OOB access.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/bpf/5590f9c67e614ec9054d0c7e74e87cc690a52c56.1777538384.git.paul.chaignon@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
The WARN_ON call in bpf_trampoline_update could never hit, because we
direct the code path with (total == 0) to out label, which effectively
skips the WARN_ON call.
The WARN_ON made sense back then when it checked tr->selector, but now
with total being set just inside the function it's useless.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20260424153905.354922-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
states.c:range_within() must be updated to properly check if
cnum-based range in an old state is a superset of a range in the cur
state. Currently it makes the decision using min/max accessors:
reg_umin(old) <= reg_umin(cur) <= reg_umax(old)
This is wrong for cnums that cross both UT_MAX/0 and ST_MAX/ST_MIN
boundaries. Consider cnum32{base=0x7FFFFFF0, size=0x80000020},
which represents values [0x7FFFFFF0, ..., U32_MAX, 0, ..., 0x10].
Its projections are u32_min/max=0/U32_MAX, s32_min/max=S32_MIN/MAX.
A register with range [0x100, 0x200] (which lies entirely in the gap
of the wrapping range) would pass the min/max check despite having no
overlap with the actual cnum arc.
This commit replaces min/max comparison with cnum{32,64}_is_subset()
operation. The operation implementation is verified using cbmc model
checker in [1].
[1] https://github.com/eddyz87/cnum-verif/
Fixes: bbc6310855 ("bpf: replace min/max fields with struct cnum{32,64}")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260425-cnum-range-within-v1-1-2fdca70cb09d@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Replace eight independent s64, u64, s32, u32 min/max fields in
bpf_reg_state with two circular number fields:
- cnum64 for a unified signed/unsigned 64-bit range tracking;
- cnum32 for a unified signed/unsigned 32-bit range tracking.
Each cnum represents a range as a single arc on the circular number
line (base + size), from which signed and unsigned bounds are derived
on demand via accessor functions introduced in the preceding commit.
Notable changes:
- Signed<->unsigned deductions in __reg_deduce_bounds() are removed.
- 64<->32 bit deductions are replaced with:
- reg->r32 = cnum32_intersect(reg->r32, cnum32_from_cnum64(reg->r64));
this is functionally equivalent to the old code.
- reg->r64 = cnum64_cnum32_intersect(reg->r64, reg->r32);
this handles a few additional cases, see commit message for
"bpf: representation and basic operations on circular numbers".
- regs_refine_cond_op() now computes results in terms of operations on
sets, e.g. for JNE:
/* Complement of the range [val, val] as cnum64. */
lo = (struct cnum64){ val + 1, U64_MAX - 1 };
reg1->r64 = cnum64_intersect(reg1->r64, lo);
- For add, sub operations on scalars replace explicit bounds
computations with cnum{32,64}_{add,negate}.
- For add, sub operations on pointers deduplicate with arithmetic
operations on scalars and use cnum{32,64}_{add,negate}.
- For and, or, xor operations on scalars remove explicit signed bounds
computations.
- range_bounds_violation() reduces to checking cnum_is_empty().
- const_tnum_range_mismatch() reduces to checking cnum_is_const().
Selftest adjustments: a few existing tests are updated because a
single cnum arc cannot always represent what the old system expressed
as the intersection of independent signed and unsigned ranges.
For example, if the old system tracked u64=[0, U64_MAX-U32_MAX+2] and
s64=[S64_MIN+2, 2] independently, their intersection is a tight
two-point set. A single cnum must pick the shorter arc, losing the
other constraint. These cases are documented with comments in the
adjusted tests.
reg_bounds.c is updated with logic similar to
cnum64_cnum32_intersect(). Instead of using cnums it inspects
intersection between 'b' and first / last / next-after-first /
previous-before-last sub-ranges of 'a'.
reg_bounds.c is also updated to skip test cases that rely
in signed and unsigned ranges intersecting in two intervals,
as such cases are not representable by a single cnum.
The following "crafted" test cases are affected:
- reg_bounds_crafted/(s64)[0xffffffffffff8000; 0x7fff] (u32)<op> [0; 0x1f]
- reg_bounds_crafted/(s64)[0; 0x1f] (u32)<op> [0xffffffffffffff80; 0x7f]
- reg_bounds_crafted/(s64)[0xffffffffffffff80; 0x7f] (u32)<op> [0; 0x1f]
- reg_bounds_crafted/(u64)[0; 1] (s32)<op> [1; 2147483648]
- reg_bounds_crafted/(u64)[1; 2147483648] (s32)<op> [0; 1]
- reg_bounds_crafted/(u64)[0; 0xffffffff00000000] (s64)<op> 0
- reg_bounds_crafted/(u64)0 (s64)<op> [0; 0xffffffff00000000]
- reg_bounds_crafted/(u64)[0; 0xffffffff00000000] (s32)<op> 0
- reg_bounds_crafted/(u64)0 (s32)<op> [0; 0xffffffff00000000]
- reg_bounds_crafted/(s64)[S64_MIN; 0] (u64)<op> S64_MIN
- reg_bounds_crafted/(s64)S64_MIN (u64)<op> [S64_MIN; 0]
- reg_bounds_crafted/(s32)[S32_MIN; 0] (u32)<op> S32_MIN
- reg_bounds_crafted/(s32)S32_MIN (u32)<op> [S32_MIN; 0]
- reg_bounds_crafted/(s64)[0; 0x1f] (u32)<op> [0xffffffff80000000; 0x7fffffff]
- reg_bounds_crafted/(s64)[0xffffffff80000000; 0x7fffffff] (u32)<op> [0; 0x1f]
- reg_bounds_crafted/(s64)[0; 0x1f] (u32)<op> [0xffffffffffff8000; 0x7fff]
As well as some reg_bounds_roand_{consts,ranges}_A_B, where A and B
differ in sign domain.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260424-cnums-everywhere-rfc-v1-v3-3-ca434b39a486@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Replace direct access to bpf_reg_state->{smin,smax,umin,umax,
s32_min,s32_max,u32_min,u32_max}_value with getter/setter inline
functions, preparing for future switch to cnum-based internal
representation.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260424-cnums-everywhere-rfc-v1-v3-2-ca434b39a486@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit adds basic definitions for cnum32/cnum64.
This is a unified numeric range representation for signed and unsigned
domains. Inspired by an old post from Shung-Hsi Yu [1] and paper [2].
Operations correctness is verified using cbmc model checker,
tests source code can be found in a separate repo [3].
The cnum64_cnum32_intersect() function is notable, because it handled
several cases verifier.c:deduce_bounds_64_from_32() does not.
Given:
- a is a 64-bit range
- b is a 32-bit range
- t is a refined 64-bit range, such that ∀ v ∈ a, (u32)v ∈ b: v ∈ t.
cnum64_cnum32_intersect() makes the following deductions:
(A): 'b' is a sub-range of the first or the last 32-bit
sub-range of 'a':
64-bit number axis --->
N*2^32 (N+1)*2^32 (N+2)*2^32 (N+3)*2^32
||------|---|=====|-------||----------|=====|-------||----------|=====|----|--||
| |< b >| |< b >| |< b >| |
| | | |
|<--+--------------------------- a ---------------------------+--->|
| |
|<-------------------------- t -------------------------->|
(B) 'b' does not intersect with the first of the last 32-bit
sub-range of 'a':
N*2^32 (N+1)*2^32 (N+2)*2^32 (N+3)*2^32
||--|=====|----|----------||--|=====|---------------||--|=====|------------|--||
|< b >| | |< b >| |< b >| |
| | | |
|<-------------+--------- a -------------------|----------->|
| |
|<-------- t ------------------>|
(C) 'b' crosses 0/U32_MAX boundary:
N*2^32 (N+1)*2^32 (N+2)*2^32 (N+3)*2^32
||===|---------|------|===||===|----------------|===||===|---------|------|===||
|b >| | |< b||b >| |< b||b >| | |< b|
| | | |
|<-----+----------------- a --------------+-------->|
| |
|<---------------- t ------------->|
Current implementation of deduce_bounds_64_from_32() only handles
case (A).
[1] https://lore.kernel.org/all/ZTZxoDJJbX9mrQ9w@u94a/
[2] https://jorgenavas.github.io/papers/ACM-TOPLAS-wrapped.pdf
[3] https://github.com/eddyz87/cnum-verif/tree/master
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260424-cnums-everywhere-rfc-v1-v3-1-ca434b39a486@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce BPF_REG_PARAMS as a dedicated BPF register for stack
argument accesses. It occupies the BPF register number 11 (R11),
which is used as the base pointer for the stack argument area,
keeping it separate from the R10-based (BPF_REG_FP) program stack.
The kernel-internal hidden register BPF_REG_AX previously occupied
slot 11 (MAX_BPF_REG). With BPF_REG_PARAMS taking that slot,
BPF_REG_AX moves to slot 12 and MAX_BPF_EXT_REG increases
accordingly.
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260423033506.2542005-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This change prepares verifier log reporting for upcoming kfunc stack
argument support.
Currently verifier log code mostly assumes that an argument can be
described directly by a register number. That works for arguments
passed in `R1` to `R5`, but it does not work once kfunc arguments
can also be passed on the stack.
Introduce an opaque `argno_t` type that encodes both register-based
and arg-based references. Four helpers form the interface:
- argno_from_reg(regno): create from a register number
- argno_from_arg(arg): create from a 1-based arg number
- reg_from_argno(a): extract register number, or -1
- arg_from_argno(a): extract arg number, or -1
reg_arg_name() converts an argno_t to a human-readable string for
verifier logs: "R%d" for register arguments, or "*(R11-off)" for
stack arguments beyond R5.
Update selftests accordingly.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260423033501.2539667-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
To support stack arguments, in later patches, argno will represent
both registers and stack arguments. To avoid confusion, rename
existing argno to arg.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260423033456.2539340-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Similar to the previous patch, try to pass bpf_reg_state from caller
to callee. Both mem_reg and size_reg are passed to helper functions.
This is important for stack arguments as they may be beyond registers 1-5.
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260423033451.2539065-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In many cases, once a bpf_reg_state is defined, it can pass to
callee's. Otherwise, callee will need to get bpf_reg_state again
based on regno. More importantly, this is needed for later stack
arguments for kfuncs since the register state for stack arguments does
not have a corresponding regno. So it makes sense to pass reg state
for callee's.
The following is the only change to avoid compilation warning:
static int sanitize_check_bounds(struct bpf_verifier_env *env,
const struct bpf_insn *insn,
- const struct bpf_reg_state *dst_reg)
+ struct bpf_reg_state *dst_reg)
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260423033446.2538321-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In check_max_stack_depth_subprog(), the local variable
tail_call_reachable is set when entering a callee that has a tail
call, but never reset when popping back to the parent. This causes
the flag to leak across sibling subprogs in the DFS traversal.
This results in unnecessary JIT overhead: the JIT emits tail call
counter preservation code for subprogs that can never be reached
via a tail call path.
Fix this by resetting tail_call_reachable to the parent's actual
per-subprog flag when popping a frame. If the parent was already
marked tail_call_reachable by a previous sibling's traversal, the
local variable stays true. Otherwise it resets to false, so
subsequent siblings start with a clean state.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260423033435.2538013-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow BPF_PROG_TYPE_RAW_TRACEPOINT, BPF_PROG_TYPE_TRACEPOINT, and
BPF_TRACE_RAW_TP (tp_btf) programs to be sleepable by adding them
to can_be_sleepable().
For BTF-based raw tracepoints (tp_btf), add a load-time check in
bpf_check_attach_target() that rejects sleepable programs attaching
to non-faultable tracepoints with a descriptive error message.
For raw tracepoints (raw_tp), add an attach-time check in
bpf_raw_tp_link_attach() that rejects sleepable programs on
non-faultable tracepoints. The attach-time check is needed because
the tracepoint name is not known at load time for raw_tp.
The attach-time check for classic tracepoints (tp) in
__perf_event_set_bpf_prog() was added in the previous patch.
Replace the verbose error message that enumerates allowed program
types with a generic "Program of this type cannot be sleepable"
message, since the list of sleepable-capable types keeps growing.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20260422-sleepable_tracepoints-v13-4-99005dff21ef@meta.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
BTF maximum vlen is encoded using 16 bits with a maximum vlen
of 65535. This has sufficed for structs, function parameters
and enumerated type values. However, with upcoming BTF location
information - in particular information about inline sites -
this limit is surpassed. Use bits 16-23 - currently unused in
BTF info - to extend to 24 bits, giving a max vlen of (2^24 - 1),
or 16 million.
Also extend BTF kind encoding from 5 to 7 bits, giving a maximum
available number of kinds of 128. Since with the BTF location work
we use another 3 kinds, we are fast approaching the current limit
of 32.
Convert BTF_MAX_* values to enums to allow them to be encoded in
kernel BTF; this will allow us to detect if the running kernel
supports a 24-bit vlen or not. Add one for max _possible_
(not used) kind.
Fix up a few places in the kernel where a 16-bit vlen is assumed;
remove BTF_INFO_MASK as now all bits are used.
The vlen expansion was suggested by Andrii in [1]; the kind expansion
is tackled here too as it may be needed also to support new kinds
in BTF.
[1] https://lore.kernel.org/bpf/CAEf4BzZx=X6vGqcA8SPU6D+v6k+TR=ZewebXMuXtpmML058piw@mail.gmail.com/
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260417143023.1551481-2-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Redefine dynptr mutability and fix inconsistency in the verifier and
kfunc signatures. Dynptr mutability is at two levels. The first is
the bpf_dynptr structure and the second is the memory the dynptr points
to. The verifer currently tracks the mutability of the bpf_dynptr struct
through helper and kfunc prototypes, where "const struct bpf_dynptr *"
means the structure itself is immutable. The second level is tracked
in upper bit of bpf_dynptr->size in runtime and is not changed in this
patch.
There are two type of inconsistency in the verfier regarding the
mutability of the bpf_dynptr struct. First, there are many existing
kfuncs whose prototypes are wrong. For example, bpf_dynptr_adjust()
mutates a dynptr's start and offset but marks the argument as a const
pointer. At the same time many other kfuncs that does not mutate the
dynptr but mark themselves as mutable. Second, the verifier currently
does not honor the const qualifier in kfunc prototypes as it determines
whether tagging the arg_type with MEM_RDONLY or not based on the register
state.
Since all the verifier care is to prevent CONST_PTR_TO_DYNPTR from
being destroyed in callback and global subprogram, redefine the
mutability at the bpf_dynptr level to just bpf_dynptr_kern->data. Then,
explicitly prohibit passing CONST_PTR_TO_DYNPTR to an argument tagged
with MEM_UNINIT or OBJ_RELEASE. The mutability of a dynptr's view is not
really interesting so drop MEM_RDONLY annotation for dynptr from the
helpers and kfuncs. Plus, if the mutability of the entire bpf_dynptr
were to be done correctly, it would kill the bpf_dynptr_adjust() usage
in callback and global subporgram.
Implementation wise
- First, make sure all kfunc arg are correctly tagged: Tag the dynptr
argument of bpf_dynptr_file_discard() with OBJ_RELEASE.
- Then, in process_dynptr_func(), make sure CONST_PTR_TO_DYNPTR cannot
be passed to argument tagged with MEM_UNINIT or OBJ_RELEASE. For
MEM_UNINIT, it is already checked by is_dynptr_reg_valid_uninit().
For OBJ_RELEASE, check against OBJ_RELEASE instead of MEM_RDONLY and
drop a now identical check in unmark_stack_slots_dynptr().
- Remove the mutual exclusive check between MEM_UNINIT and MEM_RDONLY,
but don't add a MEM_UNINIT and OBJ_RELEASE version as it is obviously
wrong.
Note that while this patch stops following the C semantic for the
mutability of bpf_dynptr, the prototype of kfuncs are still fixed to
maintain the correct C semantics in the implementation. Adding or
removing the const qualifier does not break backward compatibility.
In addition, fix kfuncs dropping the const qualifier when casting the
opaque bpf_dynptr to bpf_dynptr_kern.
In test_kfunc_dynptr_param.c, initialize dynptr to 0 to avoid
-Wuninitialized-const-pointer warning.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20260414191014.1218567-1-ameryhung@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
-----BEGIN PGP SIGNATURE-----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=79I2
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
"Most of the diff stat comes from Xu Kuohai's fix to emit ENDBR/BTI,
since all JITs had to be touched to move constant blinding out and
pass bpf_verifier_env in.
- Fix use-after-free in arena_vm_close on fork (Alexei Starovoitov)
- Dissociate struct_ops program with map if map_update fails (Amery
Hung)
- Fix out-of-range and off-by-one bugs in arm64 JIT (Daniel Borkmann)
- Fix precedence bug in convert_bpf_ld_abs alignment check (Daniel
Borkmann)
- Fix arg tracking for imprecise/multi-offset in BPF_ST/STX insns
(Eduard Zingerman)
- Copy token from main to subprogs to fix missing kallsyms (Eduard
Zingerman)
- Prevent double close and leak of btf objects in libbpf (Jiri Olsa)
- Fix af_unix null-ptr-deref in sockmap (Michal Luczaj)
- Fix NULL deref in map_kptr_match_type for scalar regs (Mykyta
Yatsenko)
- Avoid unnecessary IPIs. Remove redundant bpf_flush_icache() in
arm64 and riscv JITs (Puranjay Mohan)
- Fix out of bounds access. Validate node_id in arena_alloc_pages()
(Puranjay Mohan)
- Reject BPF-to-BPF calls and callbacks in arm32 JIT (Puranjay Mohan)
- Refactor all JITs to pass bpf_verifier_env to emit ENDBR/BTI for
indirect jump targets on x86-64, arm64 JITs (Xu Kuohai)
- Allow UTF-8 literals in bpf_bprintf_prepare() (Yihan Ding)"
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (32 commits)
bpf, arm32: Reject BPF-to-BPF calls and callbacks in the JIT
bpf: Dissociate struct_ops program with map if map_update fails
bpf: Validate node_id in arena_alloc_pages()
libbpf: Prevent double close and leak of btf objects
selftests/bpf: cover UTF-8 trace_printk output
bpf: allow UTF-8 literals in bpf_bprintf_prepare()
selftests/bpf: Reject scalar store into kptr slot
bpf: Fix NULL deref in map_kptr_match_type for scalar regs
bpf: Fix precedence bug in convert_bpf_ld_abs alignment check
bpf, arm64: Emit BTI for indirect jump target
bpf, x86: Emit ENDBR for indirect jump targets
bpf: Add helper to detect indirect jump targets
bpf: Pass bpf_verifier_env to JIT
bpf: Move constants blinding out of arch-specific JITs
bpf, sockmap: Take state lock for af_unix iter
bpf, sockmap: Fix af_unix null-ptr-deref in proto update
selftests/bpf: Extend bpf_iter_unix to attempt deadlocking
bpf, sockmap: Fix af_unix iter deadlock
bpf, sockmap: Annotate af_unix sock:: Sk_state data-races
selftests/bpf: verify kallsyms entries for token-loaded subprograms
...
Currently, when bpf_struct_ops_map_update_elem() fails, the programs'
st_ops_assoc will remain set. They may become dangling pointers if the
map is freed later, but they will never be dereferenced since the
struct_ops attachment did not succeed. However, if one of the programs
is subsequently attached as part of another struct_ops map, its
st_ops_assoc will be poisoned even though its old st_ops_assoc was stale
from a failed attachment.
Fix the spurious poisoned st_ops_assoc by dissociating struct_ops
programs with a map if the attachment fails. Move
bpf_prog_assoc_struct_ops() to after *plink++ to make sure
bpf_prog_disassoc_struct_ops() will not miss a program when iterating
st_map->links.
Note that, dissociating a program from a map requires some attention as
it must not reset a poisoned st_ops_assoc or a st_ops_assoc pointing to
another map. The former is already guarded in
bpf_prog_disassoc_struct_ops(). The latter also will not happen since
st_ops_assoc of programs in st_map->links are set by
bpf_prog_assoc_struct_ops(), which can only be poisoned or pointing to
the current map.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/r/20260417174900.2895486-1-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
arena_alloc_pages() accepts a plain int node_id and forwards it through
the entire allocation chain without any bounds checking.
Validate node_id before passing it down the allocation chain in
arena_alloc_pages().
Fixes: 317460317a ("bpf: Introduce bpf_arena.")
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260417152135.1383754-1-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_bprintf_prepare() only needs ASCII parsing for conversion
specifiers. Plain text can safely carry bytes >= 0x80, so allow
UTF-8 literals outside '%' sequences while keeping ASCII control
bytes rejected and format specifiers ASCII-only.
This keeps existing parsing rules for format directives unchanged,
while allowing helpers such as bpf_trace_printk() to emit UTF-8
literal text.
Update test_snprintf_negative() in the same commit so selftests keep
matching the new plain-text vs format-specifier split during bisection.
Fixes: 48cac3f4a9 ("bpf: Implement formatted output helpers with bstr_printf")
Signed-off-by: Yihan Ding <dingyihan@uniontech.com>
Acked-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/20260416120142.1420646-2-dingyihan@uniontech.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit ab6c637ad0 ("bpf: Fix a bpf_kptr_xchg() issue with local
kptr") refactored map_kptr_match_type() to branch on btf_is_kernel()
before checking base_type(). A scalar register stored into a kptr
slot has no btf, so the btf_is_kernel(reg->btf) call dereferences
NULL.
Move the base_type() != PTR_TO_BTF_ID guard before any reg->btf
access.
Fixes: ab6c637ad0 ("bpf: Fix a bpf_kptr_xchg() issue with local kptr")
Reported-by: Hiker Cl <clhiker365@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221372
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/20260416-kptr_crash-v1-1-5589356584b4@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce helper bpf_insn_is_indirect_target to check whether a BPF
instruction is an indirect jump target.
Since the verifier knows which instructions are indirect jump targets,
add a new flag indirect_target to struct bpf_insn_aux_data to mark
them. The verifier sets this flag when verifying an indirect jump target
instruction, and the helper checks the flag to determine whether an
instruction is an indirect jump target.
Reviewed-by: Anton Protopopov <a.s.protopopov@gmail.com> #v8
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com> #v12
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20260416064341.151802-4-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pass bpf_verifier_env to bpf_int_jit_compile(). The follow-up patch will
use env->insn_aux_data in the JIT stage to detect indirect jump targets.
Since bpf_prog_select_runtime() can be called by cbpf and lib/test_bpf.c
code without verifier, introduce helper __bpf_prog_select_runtime()
to accept the env parameter.
Remove the call to bpf_prog_select_runtime() in bpf_prog_load(), and
switch to call __bpf_prog_select_runtime() in the verifier, with env
variable passed. The original bpf_prog_select_runtime() is preserved for
cbpf and lib/test_bpf.c, where env is NULL.
Now all constants blinding calls are moved into the verifier, except
the cbpf and lib/test_bpf.c cases. The instructions arrays are adjusted
by bpf_patch_insn_data() function for normal cases, so there is no need
to call adjust_insn_arrays() in bpf_jit_blind_constants(). Remove it.
Reviewed-by: Anton Protopopov <a.s.protopopov@gmail.com> # v8
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com> # v12
Acked-by: Hengqi Chen <hengqi.chen@gmail.com> # v14
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20260416064341.151802-3-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
During the JIT stage, constants blinding rewrites instructions but only
rewrites the private instruction copy of the JITed subprog, leaving the
global env->prog->insnsi and env->insn_aux_data untouched. This causes a
mismatch between subprog instructions and the global state, making it
difficult to use the global data in the JIT.
To avoid this mismatch, and given that all arch-specific JITs already
support constants blinding, move it to the generic verifier code, and
switch to rewrite the global env->prog->insnsi with the global states
adjusted, as other rewrites in the verifier do.
This removes the constants blinding calls in each JIT, which are largely
duplicated code across architectures.
Since constants blinding is only required for JIT, and there are two
JIT entry functions, jit_subprogs() for BPF programs with multiple
subprogs and bpf_prog_select_runtime() for programs with no subprogs,
move the constants blinding invocation into these two functions.
In the verifier path, bpf_patch_insn_data() is used to keep global
verifier auxiliary data in sync with patched instructions. A key
question is whether this global auxiliary data should be restored
on the failure path.
Besides instructions, bpf_patch_insn_data() adjusts:
- prog->aux->poke_tab
- env->insn_array_maps
- env->subprog_info
- env->insn_aux_data
For prog->aux->poke_tab, it is only used by JIT or only meaningful after
JIT succeeds, so it does not need to be restored on the failure path.
For env->insn_array_maps, when JIT fails, programs using insn arrays
are rejected by bpf_insn_array_ready() due to missing JIT addresses.
Hence, env->insn_array_maps is only meaningful for JIT and does not need
to be restored.
For subprog_info, if jit_subprogs fails and CONFIG_BPF_JIT_ALWAYS_ON
is not enabled, kernel falls back to interpreter. In this case,
env->subprog_info is used to determine subprogram stack depth. So it
must be restored on failure.
For env->insn_aux_data, it is freed by clear_insn_aux_data() at the
end of bpf_check(). Before freeing, clear_insn_aux_data() loops over
env->insn_aux_data to release jump targets recorded in it. The loop
uses env->prog->len as the array length, but this length no longer
matches the actual size of the adjusted env->insn_aux_data array after
constants blinding.
To address it, a simple approach is to keep insn_aux_data as adjusted
after failure, since it will be freed shortly, and record its actual size
for the loop in clear_insn_aux_data(). But since clear_insn_aux_data()
uses the same index to loop over both env->prog->insnsi and env->insn_aux_data,
this approach results in incorrect index for the insnsi array. So an
alternative approach is adopted: clone the original env->insn_aux_data
before blinding and restore it after failure, similar to env->prog.
For classic BPF programs, constants blinding works as before since it
is still invoked from bpf_prog_select_runtime().
Reviewed-by: Anton Protopopov <a.s.protopopov@gmail.com> # v8
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com> # powerpc jit
Reviewed-by: Pu Lehui <pulehui@huawei.com> # riscv jit
Acked-by: Hengqi Chen <hengqi.chen@gmail.com> # loongarch jit
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20260416064341.151802-2-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_jit_subprogs() copies various fields from the main program's aux to
each subprogram's aux, but omits the BPF token. This causes
bpf_prog_kallsyms_add() to fail for subprograms loaded via BPF token,
as bpf_token_capable() falls back to capable() in init_user_ns when
token is NULL.
Copy prog->aux->token to func[i]->aux->token so that subprograms
inherit the same capability delegation as the main program.
Fixes: d79a354975 ("bpf: Consistently use BPF token throughout BPF verifier logic")
Signed-off-by: Tao Chen <ctao@meta.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260415-subprog-token-fix-v4-1-9bd000e8b068@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Everything:
Total patches: 368
Reviews/patch: 1.56
Reviewed rate: 74%
Excluding DAMON:
Total patches: 316
Reviews/patch: 1.77
Reviewed rate: 81%
Excluding DAMON and zram:
Total patches: 306
Reviews/patch: 1.81
Reviewed rate: 82%
Excluding DAMON, zram and maple_tree:
Total patches: 276
Reviews/patch: 2.01
Reviewed rate: 91%
Significant patch series in this merge:
- The 30 patch series "maple_tree: Replace big node with maple copy"
from Liam Howlett is mainly prepararatory work for ongoing development
but it does reduce stack usage and is an improvement.
- The 12 patch series "mm, swap: swap table phase III: remove swap_map"
from Kairui Song offers memory savings by removing the static swap_map.
It also yields some CPU savings and implements several cleanups.
- The 2 patch series "mm: memfd_luo: preserve file seals" from Pratyush
Yadav adds file seal preservation to LUO's memfd code.
- The 2 patch series "mm: zswap: add per-memcg stat for incompressible
pages" from Jiayuan Chen adds additional userspace stats reportng to
zswap.
- The 4 patch series "arch, mm: consolidate empty_zero_page" from Mike
Rapoport implements some cleanups for our handling of ZERO_PAGE() and
zero_pfn.
- The 2 patch series "mm/kmemleak: Improve scan_should_stop()
implementation" from Zhongqiu Han provides an robustness improvement and
some cleanups in the kmemleak code.
- The 4 patch series "Improve khugepaged scan logic" from Vernon Yang
"improves the khugepaged scan logic and reduces CPU consumption by
prioritizing scanning tasks that access memory frequently".
- The 2 patch series "Make KHO Stateless" from Jason Miu simplifies
Kexec Handover by "transitioning KHO from an xarray-based metadata
tracking system with serialization to a radix tree data structure that
can be passed directly to the next kernel"
- The 3 patch series "mm: vmscan: add PID and cgroup ID to vmscan
tracepoints" from Thomas Ballasi and Steven Rostedt enhances vmscan's
tracepointing.
- The 5 patch series "mm: arch/shstk: Common shadow stack mapping helper
and VM_NOHUGEPAGE" from Catalin Marinas is a cleanup for the shadow
stack code: remove per-arch code in favour of a generic implementation.
- The 2 patch series "Fix KASAN support for KHO restored vmalloc
regions" from Pasha Tatashin fixes a WARN() which can be emitted the KHO
restores a vmalloc area.
- The 4 patch series "mm: Remove stray references to pagevec" from Tal
Zussman provides several cleanups, mainly udpating references to "struct
pagevec", which became folio_batch three years ago.
- The 17 patch series "mm: Eliminate fake head pages from vmemmap
optimization" from Kiryl Shutsemau simplifies the HugeTLB vmemmap
optimization (HVO) by changing how tail pages encode their relationship
to the head page.
- The 2 patch series "mm/damon/core: improve DAMOS quota efficiency for
core layer filters" from SeongJae Park improves two problematic
behaviors of DAMOS that makes it less efficient when core layer filters
are used.
- The 3 patch series "mm/damon: strictly respect min_nr_regions" from
SeongJae Park improves DAMON usability by extending the treatment of the
min_nr_regions user-settable parameter.
- The 3 patch series "mm/page_alloc: pcp locking cleanup" from Vlastimil
Babka is a proper fix for a previously hotfixed SMP=n issue. Code
simplifications and cleanups ennsed.
- The 16 patch series "mm: cleanups around unmapping / zapping" from
David Hildenbrand implements "a bunch of cleanups around unmapping and
zapping. Mostly simplifications, code movements, documentation and
renaming of zapping functions".
- The 6 patch series "support batched checking of the young flag for
MGLRU" from Baolin Wang supports batched checking of the young flag for
MGLRU. It's part cleanups; one benchmark shows large performance
benefits for arm64.
- The 5 patch series "memcg: obj stock and slab stat caching cleanups"
from Johannes Weiner provides memcg cleanup and robustness improvements.
- The 5 patch series "Allow order zero pages in page reporting" from
Yuvraj Sakshith enhances page_reporting's free page reporting - it is
presently and undesirably order-0 pages when reporting free memory.
- The 6 patch series "mm: vma flag tweaks" from Lorenzo Stoakes is
cleanup work following from the recent conversion of the VMA flags to a
bitmap.
- The 10 patch series "mm/damon: add optional debugging-purpose sanity
checks" from SeongJae Park adds some more developer-facing debug checks
into DAMON core.
- The 2 patch series "mm/damon: test and document power-of-2
min_region_sz requirement" from SeongJae Park adds an additional DAMON
kunit test and makes some adjustments to the addr_unit parameter
handling.
- The 3 patch series "mm/damon/core: make passed_sample_intervals
comparisons overflow-safe" from SeongJae Park fixes a hard-to-hit time
overflow issue in DAMON core.
- The 7 patch series "mm/damon: improve/fixup/update ratio calculation,
test and documentation" from SeongJae Park is a "batch of misc/minor
improvements and fixups" for DAMON.
- The 4 patch series "mm: move vma_(kernel|mmu)_pagesize() out of
hugetlb.c" from David Hildenbrand fixes a possible issue with dax-device
when CONFIG_HUGETLB=n. Some code movement was required.
- The 6 patch series "zram: recompression cleanups and tweaks" from
Sergey Senozhatsky provides "a somewhat random mix of fixups,
recompression cleanups and improvements" in the zram code.
- The 11 patch series "mm/damon: support multiple goal-based quota
tuning algorithms" from SeongJae Park extend DAMOS quotas goal
auto-tuning to support multiple tuning algorithms that users can select.
- The 4 patch series "mm: thp: reduce unnecessary
start_stop_khugepaged()" from Breno Leitao fixes the khugpaged sysfs
handling so we no longer spam the logs with reams of junk when
starting/stopping khugepaged.
- The 3 patch series "mm: improve map count checks" from Lorenzo Stoakes
provides some cleanups and slight fixes in the mremap, mmap and vma
code.
- The 5 patch series "mm/damon: support addr_unit on default monitoring
targets for modules" from SeongJae Park extends the use of DAMON core's
addr_unit tunable.
- The 5 patch series "mm: khugepaged cleanups and mTHP prerequisites"
from Nico Pache provides cleanups in the khugepaged and is a base for
Nico's planned khugepaged mTHP support.
- The 15 patch series "mm: memory hot(un)plug and SPARSEMEM cleanups"
from David Hildenbrand implements code movement and cleanups in the
memhotplug and sparsemem code.
- The 2 patch series "mm: remove CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE and
cleanup CONFIG_MIGRATION" from David Hildenbrand rationalizes some
memhotplug Kconfig support.
- The 6 patch series "change young flag check functions to return bool"
from Baolin Wang is "a cleanup patchset to change all young flag check
functions to return bool".
- The 3 patch series "mm/damon/sysfs: fix memory leak and NULL
dereference issues" from Josh Law and SeongJae Park fixes a few
potential DAMON bugs.
- The 25 patch series "mm/vma: convert vm_flags_t to vma_flags_t in vma
code" from "converts a lot of the existing use of the legacy vm_flags_t
data type to the new vma_flags_t type which replaces it". Mainly in the
vma code.
- The 21 patch series "mm: expand mmap_prepare functionality and usage"
from Lorenzo Stoakes "expands the mmap_prepare functionality, which is
intended to replace the deprecated f_op->mmap hook which has been the
source of bugs and security issues for some time". Cleanups,
documentation, extension of mmap_prepare into filesystem drivers.
- The 13 patch series "mm/huge_memory: refactor zap_huge_pmd()" from
Lorenzo Stoakes simplifies and cleans up zap_huge_pmd(). Additional
cleanups around vm_normal_folio_pmd() and the softleaf functionality are
performed.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCad3HDQAKCRDdBJ7gKXxA
jrUQAPwNhPk5nPSxnyxjAeQtOBHqgCdnICeEismLajPKd9aYRgEA0s2XAu3tSUYi
GrBnWImHG3s4ePQxVcPCegWTsOUrXgQ=
=1Q7o
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "maple_tree: Replace big node with maple copy" (Liam Howlett)
Mainly prepararatory work for ongoing development but it does reduce
stack usage and is an improvement.
- "mm, swap: swap table phase III: remove swap_map" (Kairui Song)
Offers memory savings by removing the static swap_map. It also yields
some CPU savings and implements several cleanups.
- "mm: memfd_luo: preserve file seals" (Pratyush Yadav)
File seal preservation to LUO's memfd code
- "mm: zswap: add per-memcg stat for incompressible pages" (Jiayuan
Chen)
Additional userspace stats reportng to zswap
- "arch, mm: consolidate empty_zero_page" (Mike Rapoport)
Some cleanups for our handling of ZERO_PAGE() and zero_pfn
- "mm/kmemleak: Improve scan_should_stop() implementation" (Zhongqiu
Han)
A robustness improvement and some cleanups in the kmemleak code
- "Improve khugepaged scan logic" (Vernon Yang)
Improve khugepaged scan logic and reduce CPU consumption by
prioritizing scanning tasks that access memory frequently
- "Make KHO Stateless" (Jason Miu)
Simplify Kexec Handover by transitioning KHO from an xarray-based
metadata tracking system with serialization to a radix tree data
structure that can be passed directly to the next kernel
- "mm: vmscan: add PID and cgroup ID to vmscan tracepoints" (Thomas
Ballasi and Steven Rostedt)
Enhance vmscan's tracepointing
- "mm: arch/shstk: Common shadow stack mapping helper and
VM_NOHUGEPAGE" (Catalin Marinas)
Cleanup for the shadow stack code: remove per-arch code in favour of
a generic implementation
- "Fix KASAN support for KHO restored vmalloc regions" (Pasha Tatashin)
Fix a WARN() which can be emitted the KHO restores a vmalloc area
- "mm: Remove stray references to pagevec" (Tal Zussman)
Several cleanups, mainly udpating references to "struct pagevec",
which became folio_batch three years ago
- "mm: Eliminate fake head pages from vmemmap optimization" (Kiryl
Shutsemau)
Simplify the HugeTLB vmemmap optimization (HVO) by changing how tail
pages encode their relationship to the head page
- "mm/damon/core: improve DAMOS quota efficiency for core layer
filters" (SeongJae Park)
Improve two problematic behaviors of DAMOS that makes it less
efficient when core layer filters are used
- "mm/damon: strictly respect min_nr_regions" (SeongJae Park)
Improve DAMON usability by extending the treatment of the
min_nr_regions user-settable parameter
- "mm/page_alloc: pcp locking cleanup" (Vlastimil Babka)
The proper fix for a previously hotfixed SMP=n issue. Code
simplifications and cleanups ensued
- "mm: cleanups around unmapping / zapping" (David Hildenbrand)
A bunch of cleanups around unmapping and zapping. Mostly
simplifications, code movements, documentation and renaming of
zapping functions
- "support batched checking of the young flag for MGLRU" (Baolin Wang)
Batched checking of the young flag for MGLRU. It's part cleanups; one
benchmark shows large performance benefits for arm64
- "memcg: obj stock and slab stat caching cleanups" (Johannes Weiner)
memcg cleanup and robustness improvements
- "Allow order zero pages in page reporting" (Yuvraj Sakshith)
Enhance free page reporting - it is presently and undesirably order-0
pages when reporting free memory.
- "mm: vma flag tweaks" (Lorenzo Stoakes)
Cleanup work following from the recent conversion of the VMA flags to
a bitmap
- "mm/damon: add optional debugging-purpose sanity checks" (SeongJae
Park)
Add some more developer-facing debug checks into DAMON core
- "mm/damon: test and document power-of-2 min_region_sz requirement"
(SeongJae Park)
An additional DAMON kunit test and makes some adjustments to the
addr_unit parameter handling
- "mm/damon/core: make passed_sample_intervals comparisons
overflow-safe" (SeongJae Park)
Fix a hard-to-hit time overflow issue in DAMON core
- "mm/damon: improve/fixup/update ratio calculation, test and
documentation" (SeongJae Park)
A batch of misc/minor improvements and fixups for DAMON
- "mm: move vma_(kernel|mmu)_pagesize() out of hugetlb.c" (David
Hildenbrand)
Fix a possible issue with dax-device when CONFIG_HUGETLB=n. Some code
movement was required.
- "zram: recompression cleanups and tweaks" (Sergey Senozhatsky)
A somewhat random mix of fixups, recompression cleanups and
improvements in the zram code
- "mm/damon: support multiple goal-based quota tuning algorithms"
(SeongJae Park)
Extend DAMOS quotas goal auto-tuning to support multiple tuning
algorithms that users can select
- "mm: thp: reduce unnecessary start_stop_khugepaged()" (Breno Leitao)
Fix the khugpaged sysfs handling so we no longer spam the logs with
reams of junk when starting/stopping khugepaged
- "mm: improve map count checks" (Lorenzo Stoakes)
Provide some cleanups and slight fixes in the mremap, mmap and vma
code
- "mm/damon: support addr_unit on default monitoring targets for
modules" (SeongJae Park)
Extend the use of DAMON core's addr_unit tunable
- "mm: khugepaged cleanups and mTHP prerequisites" (Nico Pache)
Cleanups to khugepaged and is a base for Nico's planned khugepaged
mTHP support
- "mm: memory hot(un)plug and SPARSEMEM cleanups" (David Hildenbrand)
Code movement and cleanups in the memhotplug and sparsemem code
- "mm: remove CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE and cleanup
CONFIG_MIGRATION" (David Hildenbrand)
Rationalize some memhotplug Kconfig support
- "change young flag check functions to return bool" (Baolin Wang)
Cleanups to change all young flag check functions to return bool
- "mm/damon/sysfs: fix memory leak and NULL dereference issues" (Josh
Law and SeongJae Park)
Fix a few potential DAMON bugs
- "mm/vma: convert vm_flags_t to vma_flags_t in vma code" (Lorenzo
Stoakes)
Convert a lot of the existing use of the legacy vm_flags_t data type
to the new vma_flags_t type which replaces it. Mainly in the vma
code.
- "mm: expand mmap_prepare functionality and usage" (Lorenzo Stoakes)
Expand the mmap_prepare functionality, which is intended to replace
the deprecated f_op->mmap hook which has been the source of bugs and
security issues for some time. Cleanups, documentation, extension of
mmap_prepare into filesystem drivers
- "mm/huge_memory: refactor zap_huge_pmd()" (Lorenzo Stoakes)
Simplify and clean up zap_huge_pmd(). Additional cleanups around
vm_normal_folio_pmd() and the softleaf functionality are performed.
* tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm: fix deferred split queue races during migration
mm/khugepaged: fix issue with tracking lock
mm/huge_memory: add and use has_deposited_pgtable()
mm/huge_memory: add and use normal_or_softleaf_folio_pmd()
mm: add softleaf_is_valid_pmd_entry(), pmd_to_softleaf_folio()
mm/huge_memory: separate out the folio part of zap_huge_pmd()
mm/huge_memory: use mm instead of tlb->mm
mm/huge_memory: remove unnecessary sanity checks
mm/huge_memory: deduplicate zap deposited table call
mm/huge_memory: remove unnecessary VM_BUG_ON_PAGE()
mm/huge_memory: add a common exit path to zap_huge_pmd()
mm/huge_memory: handle buggy PMD entry in zap_huge_pmd()
mm/huge_memory: have zap_huge_pmd return a boolean, add kdoc
mm/huge: avoid big else branch in zap_huge_pmd()
mm/huge_memory: simplify vma_is_specal_huge()
mm: on remap assert that input range within the proposed VMA
mm: add mmap_action_map_kernel_pages[_full]()
uio: replace deprecated mmap hook with mmap_prepare in uio_info
drivers: hv: vmbus: replace deprecated mmap hook with mmap_prepare
mm: allow handling of stacked mmap_prepare hooks in more drivers
...
arena_vm_open() only bumps vml->mmap_count but never registers the
child VMA in arena->vma_list. The vml->vma always points at the
parent VMA, so after parent munmap the pointer dangles. If the child
then calls bpf_arena_free_pages(), zap_pages() reads the stale
vml->vma triggering use-after-free.
Fix this by preventing the arena VMA from being inherited across
fork with VM_DONTCOPY, and preventing VMA splits via the may_split
callback.
Also reject mremap with a .mremap callback returning -EINVAL. A
same-size mremap(MREMAP_FIXED) on the full arena VMA reaches
copy_vma() through the following path:
check_prep_vma() - returns 0 early: new_len == old_len
skips VM_DONTEXPAND check
prep_move_vma() - vm_start == old_addr and
vm_end == old_addr + old_len
so may_split is never called
move_vma()
copy_vma_and_data()
copy_vma()
vm_area_dup() - copies vm_private_data (vml pointer)
vm_ops->open() - bumps vml->mmap_count
vm_ops->mremap() - returns -EINVAL, rollback unmaps new VMA
The refcount ensures the rollback's arena_vm_close does not free
the vml shared with the original VMA.
Reported-by: Weiming Shi <bestswngs@gmail.com>
Reported-by: Xiang Mei <xmei5@asu.edu>
Fixes: 317460317a ("bpf: Introduce bpf_arena.")
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260413194245.21449-1-alexei.starovoitov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF_STX through ARG_IMPRECISE dst should be recognized as a local
spill and join at_stack with the written value. For example,
consider the following situation:
// r1 = ARG_IMPRECISE{mask=BIT(0)|BIT(1)}
*(u64 *)(r1 + 0) = r8
Here the analysis should produce an equivalent of
at_stack[*] = join(old, r8)
BPF_ST through multi-offset or imprecise dst should join at_stack with
none instead of overwriting the slots. For example, consider the
following situation:
// r1 = ARG_IMPRECISE{mask=BIT(0)|BIT(1)}
*(u64 *)(r1 + 0) = 0
Here the analysis should produce an equivalent of
at_stack[*r1] = join(old, none).
Move the definition of the clear_overlapping_stack_slots() in order to
have __arg_track_join() visible. Remove the OFF_IMPRECISE constant to
avoid having two ways to express imprecise offset.
Only 'offset-imprecise {frame=N, cnt=0}' remains.
Fixes: bf0c571f7f ("bpf: introduce forward arg-tracking dataflow analysis")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260413-stacklive-fixes-v2-1-398e126e5cf3@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
xulang <xulang@uniontech.com> says:
====================
Fix OOB read when copying element from a BPF_MAP_TYPE_CGROUP_STORAGE
map to another pcpu map with the same value_size that is not rounded
up to 8 bytes, and add a test case to reproduce the issue.
The root cause is that pcpu_init_value() uses copy_map_value_long() which
rounds up the copy size to 8 bytes, but CGROUP_STORAGE map values are not
8-byte aligned (e.g., 4-byte). This causes a 4-byte OOB read when
the copy is performed.
====================
Link: https://lore.kernel.org/r/7653EEEC2BAB17DF+20260402073948.2185396-1-xulang@uniontech.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
An out-of-bounds read occurs when copying element from a
BPF_MAP_TYPE_CGROUP_STORAGE map to another pcpu map with the
same value_size that is not rounded up to 8 bytes.
The issue happens when:
1. A CGROUP_STORAGE map is created with value_size not aligned to
8 bytes (e.g., 4 bytes)
2. A pcpu map is created with the same value_size (e.g., 4 bytes)
3. Update element in 2 with data in 1
pcpu_init_value assumes that all sources are rounded up to 8 bytes,
and invokes copy_map_value_long to make a data copy, However, the
assumption doesn't stand since there are some cases where the source
may not be rounded up to 8 bytes, e.g., CGROUP_STORAGE, skb->data.
the verifier verifies exactly the size that the source claims, not
the size rounded up to 8 bytes by kernel, an OOB happens when the
source has only 4 bytes while the copy size(4) is rounded up to 8.
Fixes: d3bec0138b ("bpf: Zero-fill re-used per-cpu map element")
Reported-by: Kaiyan Mei <kaiyanm@hust.edu.cn>
Closes: https://lore.kernel.org/all/14e6c70c.6c121.19c0399d948.Coremail.kaiyanm@hust.edu.cn/
Link: https://lore.kernel.org/r/420FEEDDC768A4BE+20260402074236.2187154-1-xulang@uniontech.com
Signed-off-by: Lang Xu <xulang@uniontech.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The compiler sometimes stores the result of a PTR_TO_ARENA and SCALAR
operation into the scalar register rather than the pointer register.
Relax the verifier to allow operations between a source arena register
and a destination non-arena register, marking the destination's value
as a PTR_TO_ARENA.
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Song Liu <song@kernel.org>
Fixes: 6082b6c328 ("bpf: Recognize addr_space_cast instruction in the verifier.")
Link: https://lore.kernel.org/r/20260412174546.18684-2-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The fsession attach type is missed in the verifier log in
check_get_func_ip(), bpf_check_attach_target() and check_attach_btf_id().
Update them to make the verifier log proper. Meanwhile, update the
corresponding selftests.
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20260412060346.142007-2-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BTF validation logic is independent from the main verifier.
Move it into check_btf.c
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260412152936.54262-7-alexei.starovoitov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
verifier.c is huge. Move is_state_visited() to states.c,
so that all state equivalence logic is in one file.
Mechanical move. No functional changes.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260412152936.54262-5-alexei.starovoitov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
verifier.c is huge. Split fixup/post-processing logic that runs after
the verifier accepted the program into fixups.c.
Mechanical move. No functional changes.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260412152936.54262-2-alexei.starovoitov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Remove the check that rejects sleepable BPF programs from doing
BPF_ANY/BPF_EXIST updates on local storage. This restriction was added
in commit b00fa38a9c ("bpf: Enable non-atomic allocations in local
storage") because kzalloc(GFP_KERNEL) could sleep inside
local_storage->lock. This is no longer a concern: all local storage
allocations now use kmalloc_nolock() which never sleeps.
In addition, since kmalloc_nolock() only accepts __GFP_ACCOUNT,
__GFP_ZERO and __GFP_NO_OBJ_EXT, the gfp_flags parameter plumbing from
bpf_*_storage_get() to bpf_local_storage_update() becomes dead code.
Remove gfp_flags from bpf_selem_alloc(), bpf_local_storage_alloc() and
bpf_local_storage_update(). Drop the hidden 5th argument from
bpf_*_storage_get helpers, and remove the verifier patching that
injected GFP_KERNEL/GFP_ATOMIC into the fifth argument.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/r/20260411015419.114016-4-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Switch to kmalloc_nolock() universally in local storage. Socket local
storage didn't move to kmalloc_nolock() when BPF memory allocator was
replaced by it for performance reasons. Now that kfree_rcu() supports
freeing memory allocated by kmalloc_nolock(), we can move the remaining
local storages to use kmalloc_nolock() and cleanup the cluttered free
paths.
Use kfree() instead of kfree_nolock() in bpf_selem_free_trace_rcu() and
bpf_local_storage_free_trace_rcu(). Both callbacks run in process context
where spinning is allowed, so kfree_nolock() is unnecessary.
Benchmark:
./bench -p 1 local-storage-create --storage-type socket \
--batch-size {16,32,64}
The benchmark is a microbenchmark stress-testing how fast local storage
can be created. There is no measurable throughput change for socket local
storage after switching from kzalloc() to kmalloc_nolock().
Socket local storage
batch creation speed diff
--------------- ---- ------------------ ----
Baseline 16 433.9 ± 0.6 k/s
32 434.3 ± 1.4 k/s
64 434.2 ± 0.7 k/s
After 16 439.0 ± 1.9 k/s +1.2%
32 437.3 ± 2.0 k/s +0.7%
64 435.8 ± 2.5k/s +0.4%
Also worth noting that the baseline got a 5% throughput boost when sheaf
replaces percpu partial slab recently [0].
[0] https://lore.kernel.org/bpf/20260123-sheaves-for-all-v4-0-041323d506f7@suse.cz/
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/r/20260411015419.114016-3-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When regsafe() compares two scalar registers that both carry
BPF_ADD_CONST, check_scalar_ids() maps their full compound id
(aka base | BPF_ADD_CONST flag) as one idmap entry. However,
it never verifies that the underlying base ids, that is, with
the flag stripped are consistent with existing idmap mappings.
This allows construction of two verifier states where the old
state has R3 = R2 + 10 (both sharing base id A) while the current
state has R3 = R4 + 10 (base id C, unrelated to R2). The idmap
creates two independent entries: A->B (for R2) and A|flag->C|flag
(for R3), without catching that A->C conflicts with A->B. State
pruning then incorrectly succeeds.
Fix this by additionally verifying base ID mapping consistency
whenever BPF_ADD_CONST is set: after mapping the compound ids,
also invoke check_ids() on the base IDs (flag bits stripped).
This ensures that if A was already mapped to B from comparing
the source register, any ADD_CONST derivative must also derive
from B, not an unrelated C.
Fixes: 98d7ca374b ("bpf: Track delta between "linked" registers.")
Reported-by: STAR Labs SG <info@starlabs.sg>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260410232651.559778-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
As a sanity check poison stack slots that stack liveness determined
to be dead, so that any read from such slots will cause program rejection.
If stack liveness logic is incorrect the poison can cause
valid program to be rejected, but it also will prevent unsafe program
to be accepted.
Allow global subprogs "read" poisoned stack slots.
The static stack liveness determined that subprog doesn't read certain
stack slots, but sizeof(arg_type) based global subprog validation
isn't accurate enough to know which slots will actually be read by
the callee, so it needs to check full sizeof(arg_type) at the caller.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-14-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Rework func_instance identification and remove the dynamic liveness
API, completing the transition to fully static stack liveness analysis.
Replace callchain-based func_instance keys with (callsite, depth)
pairs. The full callchain (all ancestor callsites) is no longer part
of the hash key; only the immediate callsite and the call depth
matter. This does not lose precision in practice and simplifies the
data structure significantly: struct callchain is removed entirely,
func_instance stores just callsite, depth.
Drop must_write_acc propagation. Previously, must_write marks were
accumulated across successors and propagated to the caller via
propagate_to_outer_instance(). Instead, callee entry liveness
(live_before at subprog start) is pulled directly back to the
caller's callsite in analyze_subprog() after each callee returns.
Since (callsite, depth) instances are shared across different call
chains that invoke the same subprog at the same depth, must_write
marks from one call may be stale for another. To handle this,
analyze_subprog() records into a fresh_instance() when the instance
was already visited (must_write_initialized), then merge_instances()
combines the results: may_read is unioned, must_write is intersected.
This ensures only slots written on ALL paths through all call sites
are marked as guaranteed writes.
This replaces commit_stack_write_marks() logic.
Skip recursive descent into callees that receive no FP-derived
arguments (has_fp_args() check). This is needed because global
subprogram calls can push depth beyond MAX_CALL_FRAMES (max depth
is 64 for global calls but only 8 frames are accommodated for FP
passing). It also handles the case where a callback subprog cannot be
determined by argument tracking: such callbacks will be processed by
analyze_subprog() at depth 0 independently.
Update lookup_instance() (used by is_live_before queries) to search
for the func_instance with maximal depth at the corresponding
callsite, walking depth downward from frameno to 0. This accounts for
the fact that instance depth no longer corresponds 1:1 to
bpf_verifier_state->curframe, since skipped non-FP calls create gaps.
Remove the dynamic public liveness API from verifier.c:
- bpf_mark_stack_{read,write}(), bpf_reset/commit_stack_write_marks()
- bpf_update_live_stack(), bpf_reset_live_stack_callchain()
- All call sites in check_stack_{read,write}_fixed_off(),
check_stack_range_initialized(), mark_stack_slot_obj_read(),
mark/unmark_stack_slots_{dynptr,iter,irq_flag}()
- The per-instruction write mark accumulation in do_check()
- The bpf_update_live_stack() call in prepare_func_exit()
mark_stack_read() and mark_stack_write() become static functions in
liveness.c, called only from the static analysis pass. The
func_instance->updated and must_write_dropped flags are removed.
Remove spis_single_slot(), spis_one_bit() helpers from bpf_verifier.h
as they are no longer used.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Tested-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-9-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
After arg tracking reaches a fixed point, perform a single linear scan
over the converged at_in[] state and translate each memory access into
liveness read/write masks on the func_instance:
- Load/store instructions: FP-derived pointer's frame and offset(s)
are converted to half-slot masks targeting
per_frame_masks->{may_read,must_write}
- Helper/kfunc calls: record_call_access() queries
bpf_helper_stack_access_bytes() / bpf_kfunc_stack_access_bytes()
for each FP-derived argument to determine access size and direction.
Unknown access size (S64_MIN) conservatively marks all slots from
fp_off to fp+0 as read.
- Imprecise pointers (frame == ARG_IMPRECISE): conservatively mark
all slots in every frame covered by the pointer's frame bitmask
as fully read.
- Static subprog calls with unresolved arguments: conservatively mark
all frames as fully read.
Instead of a call to clean_live_states(), start cleaning the current
state continuously as registers and stack become dead since the static
analysis provides complete liveness information. This makes
clean_live_states() and bpf_verifier_state->cleaned unnecessary.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-8-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The analysis is a basis for static liveness tracking mechanism
introduced by the next two commits.
A forward fixed-point analysis that tracks which frame's FP each
register value is derived from, and at what byte offset. This is
needed because a callee can receive a pointer to its caller's stack
frame (e.g. r1 = fp-16 at the call site), then do *(u64 *)(r1 + 0)
inside the callee — a cross-frame stack access that the callee's local
liveness must attribute to the caller's stack.
Each register holds an arg_track value from a three-level lattice:
- Precise {frame=N, off=[o1,o2,...]} — known frame index and
up to 4 concrete byte offsets
- Offset-imprecise {frame=N, off_cnt=0} — known frame, unknown offset
- Fully-imprecise {frame=ARG_IMPRECISE, mask=bitmask} — unknown frame,
mask says which frames might be involved
At CFG merge points the lattice moves toward imprecision (same
frame+offset stays precise, same frame different offsets merges offset
sets or becomes offset-imprecise, different frames become
fully-imprecise with OR'd bitmask).
The analysis also tracks spills/fills to the callee's own stack
(at_stack_in/out), so FP derived values spilled and reloaded.
This pass is run recursively per call site: when subprog A calls B
with specific FP-derived arguments, B is re-analyzed with those entry
args. The recursion follows analyze_subprog -> compute_subprog_args ->
(for each call insn) -> analyze_subprog. Subprogs that receive no
FP-derived args are skipped during recursion and analyzed
independently at depth 0.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-7-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move the `updated` check and reset from bpf_update_live_stack() into
update_instance() itself, so callers outside the main loop can reuse
it. Similarly, move write_insn_idx assignment out of
reset_stack_write_marks() into its public caller, and thread insn_idx
as a parameter to commit_stack_write_marks() instead of reading it
from liveness->write_insn_idx. Drop the unused `env` parameter from
alloc_frame_masks() and mark_stack_read().
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-6-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Migrate clean_verifier_state() and its liveness queries from 8-byte
SPI granularity to 4-byte half-slot granularity.
In __clean_func_state(), each SPI is cleaned in two independent
halves:
- half_spi 2*i (lo): slot_type[0..3]
- half_spi 2*i+1 (hi): slot_type[4..7]
Slot types STACK_DYNPTR, STACK_ITER and STACK_IRQ_FLAG are never
cleaned, as their slot type markers are required by
destroy_if_dynptr_stack_slot(), is_iter_reg_valid_uninit() and
is_irq_flag_reg_valid_uninit() for correctness.
When only the hi half is dead, spilled_ptr metadata is destroyed and
the lo half's STACK_SPILL bytes are downgraded to STACK_MISC or
STACK_ZERO. When only the lo half is dead, spilled_ptr is preserved
because the hi half may still need it for state comparison.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-5-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Convert liveness bitmask type from u64 to spis_t, doubling the number
of trackable stack slots from 64 to 128 to support 4-byte granularity.
Each 8-byte SPI now maps to two consecutive 4-byte sub-slots in the
bitmask: spi*2 half and spi*2+1 half. In verifier.c,
check_stack_write_fixed_off() now reports 4-byte aligned writes of
4-byte writes as half-slot marks and 8-byte aligned 8-byte writes as
two slots. Similar logic applied in check_stack_read_fixed_off().
Queries (is_live_before) are not yet migrated to half-slot
granularity.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-4-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Subprogram name can be computed from function info and BTF, but it is
convenient to have the name readily available for logging purposes.
Update comment saying that bpf_subprog_info->start has to be the first
field, this is no longer true, relevant sites access .start field
by it's name.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-2-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Holding the per-VMA lock across the BPF program body creates a lock
ordering problem when helpers acquire locks that depend on mmap_lock:
vm_lock -> i_rwsem -> mmap_lock -> vm_lock
Snapshot the VMA under the per-VMA lock in _next() via memcpy(), then
drop the lock before returning. The BPF program accesses only the
snapshot.
The verifier only trusts vm_mm and vm_file pointers (see
BTF_TYPE_SAFE_TRUSTED_OR_NULL in verifier.c). vm_file is reference-
counted with get_file() under the lock and released via fput() on the
next iteration or in _destroy(). vm_mm is already correct because
lock_vma_under_rcu() verifies vma->vm_mm == mm. All other pointers
are left as-is by memcpy() since the verifier treats them as untrusted.
Fixes: 4ac4546821 ("bpf: Introduce task_vma open-coded iterator kfuncs")
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260408154539.3832150-4-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The open-coded task_vma iterator holds mmap_lock for the entire duration
of iteration, increasing contention on this highly contended lock.
Switch to per-VMA locking. Find the next VMA via an RCU-protected maple
tree walk and lock it with lock_vma_under_rcu(). lock_next_vma() is not
used because its fallback takes mmap_read_lock(), and the iterator must
work in non-sleepable contexts.
lock_vma_under_rcu() is a point lookup (mas_walk) that finds the VMA
containing a given address but cannot iterate across gaps. An
RCU-protected vma_next() walk (mas_find) first locates the next VMA's
vm_start to pass to lock_vma_under_rcu().
Between the RCU walk and the lock, the VMA may be removed, shrunk, or
write-locked. On failure, advance past it using vm_end from the RCU
walk. Because the VMA slab is SLAB_TYPESAFE_BY_RCU, vm_end may be
stale; fall back to PAGE_SIZE advancement when it does not make forward
progress. Concurrent VMA insertions at addresses already passed by the
iterator are not detected.
CONFIG_PER_VMA_LOCK is required; return -EOPNOTSUPP without it.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260408154539.3832150-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The open-coded task_vma iterator reads task->mm locklessly and acquires
mmap_read_trylock() but never calls mmget(). If the task exits
concurrently, the mm_struct can be freed as it is not
SLAB_TYPESAFE_BY_RCU, resulting in a use-after-free.
Safely read task->mm with a trylock on alloc_lock and acquire an mm
reference. Drop the reference via bpf_iter_mmput_async() in _destroy()
and error paths. bpf_iter_mmput_async() is a local wrapper around
mmput_async() with a fallback to mmput() on !CONFIG_MMU.
Reject irqs-disabled contexts (including NMI) up front. Operations used
by _next() and _destroy() (mmap_read_unlock, bpf_iter_mmput_async)
take spinlocks with IRQs disabled (pool->lock, pi_lock). Running from
NMI or from a tracepoint that fires with those locks held could
deadlock.
A trylock on alloc_lock is used instead of the blocking task_lock()
(get_task_mm) to avoid a deadlock when a softirq BPF program iterates
a task that already holds its alloc_lock on the same CPU.
Fixes: 4ac4546821 ("bpf: Introduce task_vma open-coded iterator kfuncs")
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260408154539.3832150-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When querying info for an offloaded BPF map or program,
bpf_map_offload_info_fill_ns() and bpf_prog_offload_info_fill_ns()
obtain the network namespace with get_net(dev_net(offmap->netdev)).
However, the associated netdev's netns may be racing with teardown
during netns destruction. If the netns refcount has already reached 0,
get_net() performs a refcount_t increment on 0, triggering:
refcount_t: addition on 0; use-after-free.
Although rtnl_lock and bpf_devs_lock ensure the netdev pointer remains
valid, they cannot prevent the netns refcount from reaching zero.
Fix this by using maybe_get_net() instead of get_net(). maybe_get_net()
uses refcount_inc_not_zero() and returns NULL if the refcount is already
zero, which causes ns_get_path_cb() to fail and the caller to return
-ENOENT -- the correct behavior when the netns is being destroyed.
Fixes: 675fc275a3 ("bpf: offload: report device information for offloaded programs")
Fixes: 52775b33bb ("bpf: offload: report device information about offloaded maps")
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Closes: https://lore.kernel.org/bpf/f0aa3678-79c9-47ae-9e8c-02a3d1df160a@hust.edu.cn/
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260409023733.168050-1-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When a pkt pointer acquires AT_PKT_END or BEYOND_PKT_END range from
a comparison, and then, known-constant arithmetic is performed,
adjust_ptr_min_max_vals() copies the stale range via dst_reg->raw =
ptr_reg->raw without clearing the negative reg->range sentinel values.
This lets is_pkt_ptr_branch_taken() choose one branch direction and
skip going through the other. Fix this by clearing negative pkt range
values (that is, AT_PKT_END and BEYOND_PKT_END) after arithmetic on
pkt pointers. This ensures is_pkt_ptr_branch_taken() returns unknown
and both branches are properly verified.
Fixes: 6d94e741a8 ("bpf: Support for pointers beyond pkt_end.")
Reported-by: STAR Labs SG <info@starlabs.sg>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260409155016.536608-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The local subprog pointer in create_jt() and visit_abnormal_return_insn()
was declared static.
It is unconditionally assigned via bpf_find_containing_subprog() before
every use. Thus, the static qualifier serves no purpose and rather creates
confusion. Just remove it.
Fixes: e40f5a6bf8 ("bpf: correct stack liveness for tail calls")
Fixes: 493d9e0d60 ("bpf, x86: add support for indirect jumps")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20260408191242.526279-3-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Usage of ld_{abs,ind} instructions got extended into subprogs some time
ago via commit 09b28d76ea ("bpf: Add abnormal return checks."). These
are only allowed in subprograms when the latter are BTF annotated and
have scalar return types.
The code generator in bpf_gen_ld_abs() has an abnormal exit path (r0=0 +
exit) from legacy cBPF times. While the enforcement is on scalar return
types, the verifier must also simulate the path of abnormal exit if the
packet data load via ld_{abs,ind} failed.
This is currently not the case. Fix it by having the verifier simulate
both success and failure paths, and extend it in similar ways as we do
for tail calls. The success path (r0=unknown, continue to next insn) is
pushed onto stack for later validation and the r0=0 and return to the
caller is done on the fall-through side.
Fixes: 09b28d76ea ("bpf: Add abnormal return checks.")
Reported-by: STAR Labs SG <info@starlabs.sg>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260408191242.526279-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move find_linfo() as bpf_find_linfo() into core.c to allow for its use
in the verifier in subsequent patches.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260408021359.3786905-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extract bpf_get_linfo_file_line as its own function so that the logic to
obtain the file, line, and line number for a given program can be shared
in subsequent patches.
Reviewed-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260408021359.3786905-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The verifier currently does not allow overwriting a referenced dynptr's
stack slot to prevent resource leak. This is because referenced dynptr
holds additional resources that requires calling specific helpers to
release. This limitation can be relaxed when there are multiple copies
of the same dynptr. Whether it is the orignial dynptr or one of its
clones, as long as there exists at least one other dynptr with the same
ref_obj_id (to be used to release the reference), its stack slot should
be allowed to be overwritten.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260406150548.1354271-2-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When a non-{add,sub} alu op such as xor is performed on a scalar
register that previously had a BPF_ADD_CONST delta, the else path
in adjust_reg_min_max_vals() only clears dst_reg->id but leaves
dst_reg->delta unchanged.
This stale delta can propagate via assign_scalar_id_before_mov()
when the register is later used in a mov. It gets a fresh id but
keeps the stale delta from the old (now-cleared) BPF_ADD_CONST.
This stale delta can later propagate leading to a verifier-vs-
runtime value mismatch.
The clear_id label already correctly clears both delta and id.
Make the else path consistent by also zeroing the delta when id
is cleared. More generally, this introduces a helper clear_scalar_id()
which internally takes care of zeroing. There are various other
locations in the verifier where only the id is cleared. By using
the helper we catch all current and future locations.
Fixes: 98d7ca374b ("bpf: Track delta between "linked" registers.")
Reported-by: STAR Labs SG <info@starlabs.sg>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260407192421.508817-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Consider the case of rX += rX where src_reg and dst_reg are pointers to
the same bpf_reg_state in adjust_reg_min_max_vals(). The latter first
modifies the dst_reg in-place, and later in the delta tracking, the
subsequent is_reg_const(src_reg)/reg_const_value(src_reg) reads the
post-{add,sub} value instead of the original source.
This is problematic since it sets an incorrect delta, which sync_linked_regs()
then propagates to linked registers, thus creating a verifier-vs-runtime
mismatch. Fix it by just skipping this corner case.
Fixes: 98d7ca374b ("bpf: Track delta between "linked" registers.")
Reported-by: STAR Labs SG <info@starlabs.sg>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260407192421.508817-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
RCU Tasks Trace grace period implies RCU grace period, and this
guarantee is expected to remain in the future. Only BPF is the user of
this predicate, hence retire the API and clean up all in-tree users.
RCU Tasks Trace is now implemented on SRCU-fast and its grace period
mechanism always has at least one call to synchronize_rcu() as it is
required for SRCU-fast's correctness (it replaces the smp_mb() that
SRCU-fast readers skip). So, RCU-tt GP will always imply RCU GP.
Reviewed-by: Puranjay Mohan <puranjay@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260407162234.785270-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_lsm_task_to_inode() is called under rcu_read_lock() and
bpf_lsm_inet_conn_established() is called from softirq context, so
neither hook can be used by sleepable LSM programs.
Fixes: 423f16108c ("bpf: Augment the set of sleepable LSM hooks")
Reported-by: Quan Sun <2022090917019@std.uestc.edu.cn>
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Reported-by: Dongliang Mu <dzm91@hust.edu.cn>
Closes: https://lore.kernel.org/bpf/3ab69731-24d1-431a-a351-452aafaaf2a5@std.uestc.edu.cn/T/#u
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/r/20260407122334.344072-1-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When a pointer to PTR_TO_INSN is dereferenced, the offset field
of the BPF_LDX_MEM instruction can be nonzero. Patch the verifier
to not ignore this field.
Reported-by: Jiyong Yang <ksur673@gmail.com>
Fixes: 493d9e0d60 ("bpf, x86: add support for indirect jumps")
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20260406160141.36943-2-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Apparently, struct bpf_empty_prog_array exists entirely to populate a
single element of "items" in a global variable. "null_prog" is only
used during the initializer.
None of this is needed; globals will be correctly sized with an array
initializer of a flexible-array member.
So, remove struct bpf_empty_prog_array and adjust the rest of the code,
accordingly.
With these changes, fix the following warnings:
./include/linux/bpf.h:2369:31: warning: structure containing a flexible
array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/acr7Whmn0br3xeBP@kspp
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Don't reject usage of fixed unaligned offsets for syscall ctx. Tests
will be added in later commits. Unaligned offsets already work for
variable offsets.
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260406194403.1649608-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow accessing PTR_TO_CTX with variable offsets in syscall programs.
Fixed offsets are already enabled for all program types that do not
convert their ctx accesses, since the changes we made in the commit
de6c7d99f8 ("bpf: Relax fixed offset check for PTR_TO_CTX"). Note
that we also lift the restriction on passing syscall context into
helpers, which was not permitted before, and passing modified syscall
context into kfuncs.
The structure of check_mem_access can be mostly shared and preserved,
but we must use check_mem_region_access to correctly verify access with
variable offsets.
The check made in check_helper_mem_access is hardened to only allow
PTR_TO_CTX for syscall programs to be passed in as helper memory. This
was the original intention of the existing code anyway, and it makes
little sense for other program types' context to be utilized as a memory
buffer. In case a convincing example presents itself in the future, this
check can be relaxed further.
We also no longer use the last-byte access to simulate helper memory
access, but instead go through check_mem_region_access. Since this no
longer updates our max_ctx_offset, we must do so manually, to keep track
of the maximum offset at which the program ctx may be accessed.
Take care to ensure that when arg_type is ARG_PTR_TO_CTX, we do not
relax any fixed or variable offset constraints around PTR_TO_CTX even in
syscall programs, and require them to be passed unmodified. There are
several reasons why this is necessary. First, if we pass a modified ctx,
then the global subprog's accesses will not update the max_ctx_offset to
its true maximum offset, and can lead to out of bounds accesses. Second,
tail called program (or extension program replacing global subprog) where
their max_ctx_offset exceeds the program they are being called from can
also cause issues. For the latter, unmodified PTR_TO_CTX is the first
requirement for the fix, the second is ensuring max_ctx_offset >= the
program they are being called from, which has to be a separate change
not made in this commit.
All in all, we can hint using arg_type when we expect ARG_PTR_TO_CTX and
make our relaxation around offsets conditional on it.
Drop coverage of syscall tests from verifier_ctx.c temporarily for
negative cases until they are updated in subsequent commits.
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260406194403.1649608-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When a dev-bound-only BPF program (BPF_F_XDP_DEV_BOUND_ONLY) undergoes
JIT compilation with constant blinding enabled (bpf_jit_harden >= 2),
bpf_jit_blind_constants() clones the program. The original prog is then
freed in bpf_jit_prog_release_other(), which updates aux->prog to point
to the surviving clone, but fails to update offload->prog.
This leaves offload->prog pointing to the freed original program. When
the network namespace is subsequently destroyed, cleanup_net() triggers
bpf_dev_bound_netdev_unregister(), which iterates ondev->progs and calls
__bpf_prog_offload_destroy(offload->prog). Accessing the freed prog
causes a page fault:
BUG: unable to handle page fault for address: ffffc900085f1038
Workqueue: netns cleanup_net
RIP: 0010:__bpf_prog_offload_destroy+0xc/0x80
Call Trace:
__bpf_offload_dev_netdev_unregister+0x257/0x350
bpf_dev_bound_netdev_unregister+0x4a/0x90
unregister_netdevice_many_notify+0x2a2/0x660
...
cleanup_net+0x21a/0x320
The test sequence that triggers this reliably is:
1. Set net.core.bpf_jit_harden=2 (echo 2 > /proc/sys/net/core/bpf_jit_harden)
2. Run xdp_metadata selftest, which creates a dev-bound-only XDP
program on a veth inside a netns (./test_progs -t xdp_metadata)
3. cleanup_net -> page fault in __bpf_prog_offload_destroy
Dev-bound-only programs are unique in that they have an offload structure
but go through the normal JIT path instead of bpf_prog_offload_compile().
This means they are subject to constant blinding's prog clone-and-replace,
while also having offload->prog that must stay in sync.
Fix this by updating offload->prog in bpf_jit_prog_release_other(),
alongside the existing aux->prog update. Both are back-pointers to
the prog that must be kept in sync when the prog is replaced.
Fixes: 2b3486bc2d ("bpf: Introduce device-bound XDP programs")
Signed-off-by: MingTao Huang <mintaohuang@tencent.com>
Link: https://lore.kernel.org/r/tencent_BCF692F45859CCE6C22B7B0B64827947D406@qq.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
list_next_entry() never returns NULL -- when the current element is the
last entry it wraps to the list head via container_of(). The subsequent
NULL check is therefore dead code and get_next_key() never returns
-ENOENT for the last element, instead reading storage->key from a bogus
pointer that aliases internal map fields and copying the result to
userspace.
Replace it with list_entry_is_head() so the function correctly returns
-ENOENT when there are no more entries.
Fixes: de9cbbaadb ("bpf: introduce cgroup storage maps")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Sun Jian <sun.jian.kdev@gmail.com>
Acked-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/20260403132951.43533-2-bestswngs@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When a BPF_F_LOCK update races with a concurrent delete, the freed
element can be immediately recycled by alloc_htab_elem(). The fast path
in htab_map_update_elem() performs a lockless lookup and then calls
copy_map_value_locked() under the element's spin_lock. If
alloc_htab_elem() recycles the same memory, it overwrites the value
with plain copy_map_value(), without taking the spin_lock, causing
torn writes.
Use copy_map_value_locked() when BPF_F_LOCK is set so the new element's
value is written under the embedded spin_lock, serializing against any
stale lock holders.
Fixes: 96049f3afd ("bpf: introduce BPF_F_LOCK flag")
Reported-by: Aaron Esau <aaron1esau@gmail.com>
Closes: https://lore.kernel.org/all/CADucPGRvSRpkneb94dPP08YkOHgNgBnskTK6myUag_Mkjimihg@mail.gmail.com/
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260401-bpf_map_torn_writes-v1-1-782d071c55e7@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The static stack liveness analysis needs to know how many bytes a
helper or kfunc accesses through a stack pointer argument, so it can
precisely mark the affected stack slots as stack 'def' or 'use'.
Add bpf_helper_stack_access_bytes() and bpf_kfunc_stack_access_bytes()
which resolve the access size for a given call argument.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260403024422.87231-7-alexei.starovoitov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add two passes before the main verifier pass:
bpf_compute_const_regs() is a forward dataflow analysis that tracks
register values in R0-R9 across the program using fixed-point
iteration in reverse postorder. Each register is tracked with
a six-state lattice:
UNVISITED -> CONST(val) / MAP_PTR(map_index) /
MAP_VALUE(map_index, offset) / SUBPROG(num) -> UNKNOWN
At merge points, if two paths produce the same state and value for
a register, it stays; otherwise it becomes UNKNOWN.
The analysis handles:
- MOV, ADD, SUB, AND with immediate or register operands
- LD_IMM64 for plain constants, map FDs, map values, and subprogs
- LDX from read-only maps: constant-folds the load by reading the
map value directly via bpf_map_direct_read()
Results that fit in 32 bits are stored per-instruction in
insn_aux_data and bitmasks.
bpf_prune_dead_branches() uses the computed constants to evaluate
conditional branches. When both operands of a conditional jump are
known constants, the branch outcome is determined statically and the
instruction is rewritten to an unconditional jump.
The CFG postorder is then recomputed to reflect new control flow.
This eliminates dead edges so that subsequent liveness analysis
doesn't propagate through dead code.
Also add runtime sanity check to validate that precomputed
constants match the verifier's tracked state.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260403024422.87231-5-alexei.starovoitov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a pass that sorts subprogs in topological order so that iterating
subprog_topo_order[] walks leaf subprogs first, then their callers.
This is computed as a DFS post-order traversal of the CFG.
The pass runs after check_cfg() to ensure the CFG has been validated
before traversing and after postorder has been computed to avoid
walking dead code.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260403024422.87231-3-alexei.starovoitov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch fixes the invariant violations that can happen after we
refine ranges & tnum based on an incorrectly-detected branch condition.
For example, the branch is always true, but we miss it in
is_branch_taken; we then refine based on the branch being false and end
up with incoherent ranges (e.g. umax < umin).
To avoid this, we can simulate the refinement on both branches. More
specifically, this patch simulates both branches taken using
regs_refine_cond_op and reg_bounds_sync. If the resulting register
states are ill-formed on one of the branches, is_branch_taken can mark
that branch as "never taken".
On a more formal note, we can deduce a branch is not taken when
regs_refine_cond_op or reg_bounds_sync returns an ill-formed state
because the branch operators are sound (verified with Agni [1]).
Soundness means that the verifier is guaranteed to produce sound
outputs on the taken branches. On the non-taken branch (explored
because of imprecision in the bounds), the verifier is free to produce
any output. We use ill-formedness as a signal that the branch is dead
and prune that branch.
This patch moves the refinement logic for both branches from
reg_set_min_max to their own function, simulate_both_branches_taken,
which is called from is_scalar_branch_taken. As a result,
reg_set_min_max now only runs sanity checks and has been renamed to
reg_bounds_sanity_check_branches to reflect that.
We have had five patches fixing specific cases of invariant violations
in the past, all added with selftests:
- commit fbc7aef517 ("bpf: Fix u32/s32 bounds when ranges cross
min/max boundary")
- commit efc11a6678 ("bpf: Improve bounds when tnum has a single
possible value")
- commit f41345f47f ("bpf: Use tnums for JEQ/JNE is_branch_taken
logic")
- commit 00bf8d0c6c ("bpf: Improve bounds when s64 crosses sign
boundary")
- commit 6279846b9b ("bpf: Forget ranges when refining tnum after
JSET")
To confirm that this patch addresses all invariant violations, we have
also reverted those five commits and verified that their related
selftests don't cause any invariant violation warnings anymore. Those
selftests still fail but only because of misdetected branches or
less-precise bounds than expected. This demonstrates that the current
patch is enough to avoid the invariant violation warning AND that the
previous five patches are still useful to improve branch detection.
In addition to the selftests, this change was also tested with the
Cilium complexity test suite: all programs were successfully loaded and
it didn't change the number of processed instructions.
Link: https://github.com/bpfverif/agni [1]
Reported-by: syzbot+c950cc277150935cc0b5@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c950cc277150935cc0b5
Co-developed-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Co-developed-by: Srinivas Narayana <srinivas.narayana@rutgers.edu>
Signed-off-by: Srinivas Narayana <srinivas.narayana@rutgers.edu>
Co-developed-by: Santosh Nagarakatte <santosh.nagarakatte@rutgers.edu>
Signed-off-by: Santosh Nagarakatte <santosh.nagarakatte@rutgers.edu>
Signed-off-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/a166b54a3cbbbdbcdf8a87f53045f1097176218b.1775142354.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In the subsequent commit, to prune dead branches we will rely on
detecting ill-formed ranges using range_bounds_violations()
(e.g., umin > umax) after refining register bounds using
regs_refine_cond_op().
However, reg_bounds_sync() can sometimes "repair" ill-formed bounds,
potentially masking a violation that was produced by
regs_refine_cond_op().
This commit modifies reg_bounds_sync() to exit early if an invariant
violation is already present in the input.
This ensures ill-formed reg_states remain ill-formed after
reg_bounds_sync(), allowing simulate_both_branches_taken() to correctly
identify dead branches with a single check to range_bounds_violation().
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/73127d628841c59cb7423d6bdcd204bf90bcdc80.1775142354.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In a subsequent patch, the regs_refine_cond_op and reg_bounds_sync
functions will be called in is_branch_taken instead of reg_set_min_max,
to simulate each branch's outcome. Since they will run before we branch
out, these two functions will need to work on temporary registers for
the two branches.
This refactoring patch prepares for that change, by introducing the
temporary registers on bpf_verifier_env and using them in
reg_set_min_max.
This change also allows us to save one fake_reg slot as we don't need to
allocate an additional temporary buffer in case of a BPF_K condition.
Finally, you may notice that this patch removes the check for
"false_reg1 == false_reg2" in reg_set_min_max. That check was introduced
in commit d43ad9da80 ("bpf: Skip bounds adjustment for conditional
jumps on same scalar register") to avoid an invariant violation. Given
that "env->false_reg1 == env->false_reg2" doesn't make sense and
invariant violations are addressed in a subsequent commit, this patch
just removes the check.
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Co-developed-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Signed-off-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/260b0270052944a420e1c56e6a92df4d43cadf03.1775142354.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit refactors reg_bounds_sanity_check to factor out the logic
that performs the sanity check from the logic that does the reporting.
Signed-off-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/198ec3e69343e2c46dc9cbe2b1bc9be9ae2df5bd.1775142354.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When backtrack_insn encounters a BPF_STX instruction with BPF_ATOMIC
and BPF_FETCH, the src register (or r0 for BPF_CMPXCHG) also acts as
a destination, thus receiving the old value from the memory location.
The current backtracking logic does not account for this. It treats
atomic fetch operations the same as regular stores where the src
register is only an input. This leads the backtrack_insn to fail to
propagate precision to the stack location, which is then not marked
as precise!
Later, the verifier's path pruning can incorrectly consider two states
equivalent when they differ in terms of stack state. Meaning, two
branches can be treated as equivalent and thus get pruned when they
should not be seen as such.
Fix it as follows: Extend the BPF_LDX handling in backtrack_insn to
also cover atomic fetch operations via is_atomic_fetch_insn() helper.
When the fetch dst register is being tracked for precision, clear it,
and propagate precision over to the stack slot. For non-stack memory,
the precision walk stops at the atomic instruction, same as regular
BPF_LDX. This covers all fetch variants.
Before:
0: (b7) r1 = 8 ; R1=8
1: (7b) *(u64 *)(r10 -8) = r1 ; R1=8 R10=fp0 fp-8=8
2: (b7) r2 = 0 ; R2=0
3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) ; R2=8 R10=fp0 fp-8=mmmmmmmm
4: (bf) r3 = r10 ; R3=fp0 R10=fp0
5: (0f) r3 += r2
mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r2 stack= before 4: (bf) r3 = r10
mark_precise: frame0: regs=r2 stack= before 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2)
mark_precise: frame0: regs=r2 stack= before 2: (b7) r2 = 0
6: R2=8 R3=fp8
6: (b7) r0 = 0 ; R0=0
7: (95) exit
After:
0: (b7) r1 = 8 ; R1=8
1: (7b) *(u64 *)(r10 -8) = r1 ; R1=8 R10=fp0 fp-8=8
2: (b7) r2 = 0 ; R2=0
3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) ; R2=8 R10=fp0 fp-8=mmmmmmmm
4: (bf) r3 = r10 ; R3=fp0 R10=fp0
5: (0f) r3 += r2
mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r2 stack= before 4: (bf) r3 = r10
mark_precise: frame0: regs=r2 stack= before 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2)
mark_precise: frame0: regs= stack=-8 before 2: (b7) r2 = 0
mark_precise: frame0: regs= stack=-8 before 1: (7b) *(u64 *)(r10 -8) = r1
mark_precise: frame0: regs=r1 stack= before 0: (b7) r1 = 8
6: R2=8 R3=fp8
6: (b7) r0 = 0 ; R0=0
7: (95) exit
Fixes: 5ffa25502b ("bpf: Add instructions for atomic_[cmp]xchg")
Fixes: 5ca419f286 ("bpf: Add BPF_FETCH field / create atomic_fetch_add instruction")
Reported-by: STAR Labs SG <info@starlabs.sg>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260331222020.401848-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
check_mem_access() matches PTR_TO_BUF via base_type() which strips
PTR_MAYBE_NULL, allowing direct dereference without a null check.
Map iterator ctx->key and ctx->value are PTR_TO_BUF | PTR_MAYBE_NULL.
On stop callbacks these are NULL, causing a kernel NULL dereference.
Add a type_may_be_null() guard to the PTR_TO_BUF branch, matching the
existing PTR_TO_BTF_ID pattern.
Fixes: 20b2aff4bc ("bpf: Introduce MEM_RDONLY flag")
Signed-off-by: Qi Tang <tpluszz77@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260402092923.38357-2-tpluszz77@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Replace bpf_mem_alloc/bpf_mem_free with kmalloc_nolock/kfree_nolock for
bpf_dynptr_file_impl, continuing the migration away from bpf_mem_alloc
now that kmalloc can be used from NMI context.
freader_cleanup() runs before kfree_nolock() while the dynptr still
holds exclusive access, so plain kfree_nolock() is safe — no concurrent
readers can access the object.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260330-kmalloc_special-v2-2-c90403f92ff0@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Replace bpf_mem_alloc/bpf_mem_free with
kmalloc_nolock/kfree_rcu for bpf_task_work_ctx.
Replace guard(rcu_tasks_trace)() with guard(rcu)() in
bpf_task_work_irq(). The function only accesses ctx struct members
(not map values), so tasks trace protection is not needed - regular
RCU is sufficient since ctx is freed via kfree_rcu. The guard in
bpf_task_work_callback() remains as tasks trace since it accesses map
values from process context.
Sleepable BPF programs hold rcu_read_lock_trace but not
regular rcu_read_lock. Since kfree_rcu
waits for a regular RCU grace period, the ctx memory can be freed
while a sleepable program is still running. Add scoped_guard(rcu)
around the pointer read and refcount tryget in
bpf_task_work_acquire_ctx to close this race window.
Since kfree_rcu uses call_rcu internally which is not safe from
NMI context, defer destruction via irq_work when irqs are disabled.
For the lost-cmpxchg path the ctx was never published, so
kfree_nolock is safe.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260330-kmalloc_special-v2-1-c90403f92ff0@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
uprobe programs are allowed to modify struct pt_regs.
Since the actual program type of uprobe is KPROBE, it can be abused to
modify struct pt_regs via kprobe+freplace when the kprobe attaches to
kernel functions.
For example,
SEC("?kprobe")
int kprobe(struct pt_regs *regs)
{
return 0;
}
SEC("?freplace")
int freplace_kprobe(struct pt_regs *regs)
{
regs->di = 0;
return 0;
}
freplace_kprobe prog will attach to kprobe prog.
kprobe prog will attach to a kernel function.
Without this patch, when the kernel function runs, its first arg will
always be set as 0 via the freplace_kprobe prog.
To fix the abuse of kprobe_write_ctx=true via kprobe+freplace, disallow
attaching freplace programs on kprobe programs with different
kprobe_write_ctx values.
Fixes: 7384893d97 ("bpf: Allow uprobe program to change context registers")
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260331145353.87606-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Recently, tracepoints were switched from using disabled preemption
(which acts as RCU read section) to SRCU-fast when they are not
faultable. This means that to do a proper grace period wait for programs
running in such tracepoints, we must use SRCU's grace period wait.
This is only for non-faultable tracepoints, faultable ones continue
using RCU Tasks Trace.
However, bpf_link_free() currently does call_rcu() for all cases when
the link is non-sleepable (hence, for tracepoints, non-faultable). Fix
this by doing a call_srcu() grace period wait.
As far RCU Tasks Trace gp -> RCU gp chaining is concerned, it is deemed
unnecessary for tracepoint programs. The link and program are either
accessed under RCU Tasks Trace protection, or SRCU-fast protection now.
The earlier logic of chaining both RCU Tasks Trace and RCU gp waits was
to generalize the logic, even if it conceded an extra RCU gp wait,
however that is unnecessary for tracepoints even before this change.
In practice no cost was paid since rcu_trace_implies_rcu_gp() was always
true. Hence we need not chaining any RCU gp after the SRCU gp.
For instance, in the non-faultable raw tracepoint, the RCU read section
of the program in __bpf_trace_run() is enclosed in the SRCU gp, likewise
for faultable raw tracepoint, the program is under the RCU Tasks Trace
protection. Hence, the outermost scope can be waited upon to ensure
correctness.
Also, sleepable programs cannot be attached to non-faultable
tracepoints, so whenever program or link is sleepable, only RCU Tasks
Trace protection is being used for the link and prog.
Fixes: a46023d561 ("tracing: Guard __DECLARE_TRACE() use of __DO_TRACE_CALL() with SRCU-fast")
Reviewed-by: Sun Jian <sun.jian.kdev@gmail.com>
Reviewed-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20260331211021.1632902-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In case rold->reg->range == BEYOND_PKT_END && rcur->reg->range == N
regsafe() may return true which may lead to current state with
valid packet range not being explored. Fix the bug.
Fixes: 6d94e741a8 ("bpf: Support for pointers beyond pkt_end.")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20260331204228.26726-1-alexei.starovoitov@gmail.com
The following kfuncs currently accept void *meta__ign argument:
* bpf_obj_new_impl
* bpf_obj_drop_impl
* bpf_percpu_obj_new_impl
* bpf_percpu_obj_drop_impl
* bpf_refcount_acquire_impl
* bpf_list_push_back_impl
* bpf_list_push_front_impl
* bpf_rbtree_add_impl
The __ign suffix is an indicator for the verifier to skip the argument
in check_kfunc_args(). Then, in fixup_kfunc_call() the verifier may
set the value of this argument to struct btf_struct_meta *
kptr_struct_meta from insn_aux_data.
BPF programs must pass a dummy NULL value when calling these kfuncs.
Additionally, the list and rbtree _impl kfuncs also accept an implicit
u64 argument, which doesn't require __ign suffix because it's a
scalar, and BPF programs explicitly pass 0.
Add new kfuncs with KF_IMPLICIT_ARGS [1], that correspond to each
_impl kfunc accepting meta__ign. The existing _impl kfuncs remain
unchanged for backwards compatibility.
To support this, add "btf_struct_meta" to the list of recognized
implicit argument types in resolve_btfids.
Implement is_kfunc_arg_implicit() in the verifier, that determines
implicit args by inspecting both a non-_impl BTF prototype of the
kfunc.
Update the special_kfunc_list in the verifier and relevant checks to
support both the old _impl and the new KF_IMPLICIT_ARGS variants of
btf_struct_meta users.
[1] https://lore.kernel.org/bpf/20260120222638.3976562-1-ihor.solodrai@linux.dev/
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260327203241.3365046-1-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A bunch of new hooks for managing block devices were added a while ago
but they weren't actually appropriately classified.
* bpf_lsm_bdev_alloc() is called when the inode for the block
device is allocated. This happens from a sleepable context so mark the
function as sleepable. When this function is called the memory for the
block device storage embedded into the inode is zeroed. That block
device cannot be meaningfully reference or interacted with at this
point. So mark it as untrusted for now.
* bpf_lsm_bdev_free() is called when the inode for the block
device is freed. A bunch of memory associated with the block device
has already been freed and there's dangling pointers in there. So mark
it as untrusted. It cannot be meaningfully referenced or interacted
with anymore. It is also called from sb->s_op->free_inode:: which
means it runs in rcu context (most of the times). So leave it as
non-sleepable.
* bpf_lsm_bdev_setintegrity() is called when a dm-verity device
is instantiated (glossing over details for simplicity of the commit
message). The block device is very much alive so it remains a trusted
hook. It's also called with device mapper's suspend lock held and so
the hook is able to sleep so mark it sleepable.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20260326-work-bpf-bdev-v2-1-5e3c58963987@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
