Move the `updated` check and reset from bpf_update_live_stack() into
update_instance() itself, so callers outside the main loop can reuse
it. Similarly, move write_insn_idx assignment out of
reset_stack_write_marks() into its public caller, and thread insn_idx
as a parameter to commit_stack_write_marks() instead of reading it
from liveness->write_insn_idx. Drop the unused `env` parameter from
alloc_frame_masks() and mark_stack_read().
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-6-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Migrate clean_verifier_state() and its liveness queries from 8-byte
SPI granularity to 4-byte half-slot granularity.
In __clean_func_state(), each SPI is cleaned in two independent
halves:
- half_spi 2*i (lo): slot_type[0..3]
- half_spi 2*i+1 (hi): slot_type[4..7]
Slot types STACK_DYNPTR, STACK_ITER and STACK_IRQ_FLAG are never
cleaned, as their slot type markers are required by
destroy_if_dynptr_stack_slot(), is_iter_reg_valid_uninit() and
is_irq_flag_reg_valid_uninit() for correctness.
When only the hi half is dead, spilled_ptr metadata is destroyed and
the lo half's STACK_SPILL bytes are downgraded to STACK_MISC or
STACK_ZERO. When only the lo half is dead, spilled_ptr is preserved
because the hi half may still need it for state comparison.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-5-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Convert liveness bitmask type from u64 to spis_t, doubling the number
of trackable stack slots from 64 to 128 to support 4-byte granularity.
Each 8-byte SPI now maps to two consecutive 4-byte sub-slots in the
bitmask: spi*2 half and spi*2+1 half. In verifier.c,
check_stack_write_fixed_off() now reports 4-byte aligned writes of
4-byte writes as half-slot marks and 8-byte aligned 8-byte writes as
two slots. Similar logic applied in check_stack_read_fixed_off().
Queries (is_live_before) are not yet migrated to half-slot
granularity.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-4-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Subprogram name can be computed from function info and BTF, but it is
convenient to have the name readily available for logging purposes.
Update comment saying that bpf_subprog_info->start has to be the first
field, this is no longer true, relevant sites access .start field
by it's name.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-2-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Holding the per-VMA lock across the BPF program body creates a lock
ordering problem when helpers acquire locks that depend on mmap_lock:
vm_lock -> i_rwsem -> mmap_lock -> vm_lock
Snapshot the VMA under the per-VMA lock in _next() via memcpy(), then
drop the lock before returning. The BPF program accesses only the
snapshot.
The verifier only trusts vm_mm and vm_file pointers (see
BTF_TYPE_SAFE_TRUSTED_OR_NULL in verifier.c). vm_file is reference-
counted with get_file() under the lock and released via fput() on the
next iteration or in _destroy(). vm_mm is already correct because
lock_vma_under_rcu() verifies vma->vm_mm == mm. All other pointers
are left as-is by memcpy() since the verifier treats them as untrusted.
Fixes: 4ac4546821 ("bpf: Introduce task_vma open-coded iterator kfuncs")
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260408154539.3832150-4-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The open-coded task_vma iterator holds mmap_lock for the entire duration
of iteration, increasing contention on this highly contended lock.
Switch to per-VMA locking. Find the next VMA via an RCU-protected maple
tree walk and lock it with lock_vma_under_rcu(). lock_next_vma() is not
used because its fallback takes mmap_read_lock(), and the iterator must
work in non-sleepable contexts.
lock_vma_under_rcu() is a point lookup (mas_walk) that finds the VMA
containing a given address but cannot iterate across gaps. An
RCU-protected vma_next() walk (mas_find) first locates the next VMA's
vm_start to pass to lock_vma_under_rcu().
Between the RCU walk and the lock, the VMA may be removed, shrunk, or
write-locked. On failure, advance past it using vm_end from the RCU
walk. Because the VMA slab is SLAB_TYPESAFE_BY_RCU, vm_end may be
stale; fall back to PAGE_SIZE advancement when it does not make forward
progress. Concurrent VMA insertions at addresses already passed by the
iterator are not detected.
CONFIG_PER_VMA_LOCK is required; return -EOPNOTSUPP without it.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260408154539.3832150-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The open-coded task_vma iterator reads task->mm locklessly and acquires
mmap_read_trylock() but never calls mmget(). If the task exits
concurrently, the mm_struct can be freed as it is not
SLAB_TYPESAFE_BY_RCU, resulting in a use-after-free.
Safely read task->mm with a trylock on alloc_lock and acquire an mm
reference. Drop the reference via bpf_iter_mmput_async() in _destroy()
and error paths. bpf_iter_mmput_async() is a local wrapper around
mmput_async() with a fallback to mmput() on !CONFIG_MMU.
Reject irqs-disabled contexts (including NMI) up front. Operations used
by _next() and _destroy() (mmap_read_unlock, bpf_iter_mmput_async)
take spinlocks with IRQs disabled (pool->lock, pi_lock). Running from
NMI or from a tracepoint that fires with those locks held could
deadlock.
A trylock on alloc_lock is used instead of the blocking task_lock()
(get_task_mm) to avoid a deadlock when a softirq BPF program iterates
a task that already holds its alloc_lock on the same CPU.
Fixes: 4ac4546821 ("bpf: Introduce task_vma open-coded iterator kfuncs")
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260408154539.3832150-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When querying info for an offloaded BPF map or program,
bpf_map_offload_info_fill_ns() and bpf_prog_offload_info_fill_ns()
obtain the network namespace with get_net(dev_net(offmap->netdev)).
However, the associated netdev's netns may be racing with teardown
during netns destruction. If the netns refcount has already reached 0,
get_net() performs a refcount_t increment on 0, triggering:
refcount_t: addition on 0; use-after-free.
Although rtnl_lock and bpf_devs_lock ensure the netdev pointer remains
valid, they cannot prevent the netns refcount from reaching zero.
Fix this by using maybe_get_net() instead of get_net(). maybe_get_net()
uses refcount_inc_not_zero() and returns NULL if the refcount is already
zero, which causes ns_get_path_cb() to fail and the caller to return
-ENOENT -- the correct behavior when the netns is being destroyed.
Fixes: 675fc275a3 ("bpf: offload: report device information for offloaded programs")
Fixes: 52775b33bb ("bpf: offload: report device information about offloaded maps")
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Closes: https://lore.kernel.org/bpf/f0aa3678-79c9-47ae-9e8c-02a3d1df160a@hust.edu.cn/
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260409023733.168050-1-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When a pkt pointer acquires AT_PKT_END or BEYOND_PKT_END range from
a comparison, and then, known-constant arithmetic is performed,
adjust_ptr_min_max_vals() copies the stale range via dst_reg->raw =
ptr_reg->raw without clearing the negative reg->range sentinel values.
This lets is_pkt_ptr_branch_taken() choose one branch direction and
skip going through the other. Fix this by clearing negative pkt range
values (that is, AT_PKT_END and BEYOND_PKT_END) after arithmetic on
pkt pointers. This ensures is_pkt_ptr_branch_taken() returns unknown
and both branches are properly verified.
Fixes: 6d94e741a8 ("bpf: Support for pointers beyond pkt_end.")
Reported-by: STAR Labs SG <info@starlabs.sg>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260409155016.536608-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The local subprog pointer in create_jt() and visit_abnormal_return_insn()
was declared static.
It is unconditionally assigned via bpf_find_containing_subprog() before
every use. Thus, the static qualifier serves no purpose and rather creates
confusion. Just remove it.
Fixes: e40f5a6bf8 ("bpf: correct stack liveness for tail calls")
Fixes: 493d9e0d60 ("bpf, x86: add support for indirect jumps")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20260408191242.526279-3-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Usage of ld_{abs,ind} instructions got extended into subprogs some time
ago via commit 09b28d76ea ("bpf: Add abnormal return checks."). These
are only allowed in subprograms when the latter are BTF annotated and
have scalar return types.
The code generator in bpf_gen_ld_abs() has an abnormal exit path (r0=0 +
exit) from legacy cBPF times. While the enforcement is on scalar return
types, the verifier must also simulate the path of abnormal exit if the
packet data load via ld_{abs,ind} failed.
This is currently not the case. Fix it by having the verifier simulate
both success and failure paths, and extend it in similar ways as we do
for tail calls. The success path (r0=unknown, continue to next insn) is
pushed onto stack for later validation and the r0=0 and return to the
caller is done on the fall-through side.
Fixes: 09b28d76ea ("bpf: Add abnormal return checks.")
Reported-by: STAR Labs SG <info@starlabs.sg>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260408191242.526279-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move find_linfo() as bpf_find_linfo() into core.c to allow for its use
in the verifier in subsequent patches.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260408021359.3786905-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extract bpf_get_linfo_file_line as its own function so that the logic to
obtain the file, line, and line number for a given program can be shared
in subsequent patches.
Reviewed-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260408021359.3786905-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The verifier currently does not allow overwriting a referenced dynptr's
stack slot to prevent resource leak. This is because referenced dynptr
holds additional resources that requires calling specific helpers to
release. This limitation can be relaxed when there are multiple copies
of the same dynptr. Whether it is the orignial dynptr or one of its
clones, as long as there exists at least one other dynptr with the same
ref_obj_id (to be used to release the reference), its stack slot should
be allowed to be overwritten.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260406150548.1354271-2-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When a non-{add,sub} alu op such as xor is performed on a scalar
register that previously had a BPF_ADD_CONST delta, the else path
in adjust_reg_min_max_vals() only clears dst_reg->id but leaves
dst_reg->delta unchanged.
This stale delta can propagate via assign_scalar_id_before_mov()
when the register is later used in a mov. It gets a fresh id but
keeps the stale delta from the old (now-cleared) BPF_ADD_CONST.
This stale delta can later propagate leading to a verifier-vs-
runtime value mismatch.
The clear_id label already correctly clears both delta and id.
Make the else path consistent by also zeroing the delta when id
is cleared. More generally, this introduces a helper clear_scalar_id()
which internally takes care of zeroing. There are various other
locations in the verifier where only the id is cleared. By using
the helper we catch all current and future locations.
Fixes: 98d7ca374b ("bpf: Track delta between "linked" registers.")
Reported-by: STAR Labs SG <info@starlabs.sg>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260407192421.508817-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Consider the case of rX += rX where src_reg and dst_reg are pointers to
the same bpf_reg_state in adjust_reg_min_max_vals(). The latter first
modifies the dst_reg in-place, and later in the delta tracking, the
subsequent is_reg_const(src_reg)/reg_const_value(src_reg) reads the
post-{add,sub} value instead of the original source.
This is problematic since it sets an incorrect delta, which sync_linked_regs()
then propagates to linked registers, thus creating a verifier-vs-runtime
mismatch. Fix it by just skipping this corner case.
Fixes: 98d7ca374b ("bpf: Track delta between "linked" registers.")
Reported-by: STAR Labs SG <info@starlabs.sg>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260407192421.508817-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
RCU Tasks Trace grace period implies RCU grace period, and this
guarantee is expected to remain in the future. Only BPF is the user of
this predicate, hence retire the API and clean up all in-tree users.
RCU Tasks Trace is now implemented on SRCU-fast and its grace period
mechanism always has at least one call to synchronize_rcu() as it is
required for SRCU-fast's correctness (it replaces the smp_mb() that
SRCU-fast readers skip). So, RCU-tt GP will always imply RCU GP.
Reviewed-by: Puranjay Mohan <puranjay@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260407162234.785270-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_lsm_task_to_inode() is called under rcu_read_lock() and
bpf_lsm_inet_conn_established() is called from softirq context, so
neither hook can be used by sleepable LSM programs.
Fixes: 423f16108c ("bpf: Augment the set of sleepable LSM hooks")
Reported-by: Quan Sun <2022090917019@std.uestc.edu.cn>
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Reported-by: Dongliang Mu <dzm91@hust.edu.cn>
Closes: https://lore.kernel.org/bpf/3ab69731-24d1-431a-a351-452aafaaf2a5@std.uestc.edu.cn/T/#u
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/r/20260407122334.344072-1-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When a pointer to PTR_TO_INSN is dereferenced, the offset field
of the BPF_LDX_MEM instruction can be nonzero. Patch the verifier
to not ignore this field.
Reported-by: Jiyong Yang <ksur673@gmail.com>
Fixes: 493d9e0d60 ("bpf, x86: add support for indirect jumps")
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20260406160141.36943-2-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Apparently, struct bpf_empty_prog_array exists entirely to populate a
single element of "items" in a global variable. "null_prog" is only
used during the initializer.
None of this is needed; globals will be correctly sized with an array
initializer of a flexible-array member.
So, remove struct bpf_empty_prog_array and adjust the rest of the code,
accordingly.
With these changes, fix the following warnings:
./include/linux/bpf.h:2369:31: warning: structure containing a flexible
array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/acr7Whmn0br3xeBP@kspp
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Don't reject usage of fixed unaligned offsets for syscall ctx. Tests
will be added in later commits. Unaligned offsets already work for
variable offsets.
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260406194403.1649608-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow accessing PTR_TO_CTX with variable offsets in syscall programs.
Fixed offsets are already enabled for all program types that do not
convert their ctx accesses, since the changes we made in the commit
de6c7d99f8 ("bpf: Relax fixed offset check for PTR_TO_CTX"). Note
that we also lift the restriction on passing syscall context into
helpers, which was not permitted before, and passing modified syscall
context into kfuncs.
The structure of check_mem_access can be mostly shared and preserved,
but we must use check_mem_region_access to correctly verify access with
variable offsets.
The check made in check_helper_mem_access is hardened to only allow
PTR_TO_CTX for syscall programs to be passed in as helper memory. This
was the original intention of the existing code anyway, and it makes
little sense for other program types' context to be utilized as a memory
buffer. In case a convincing example presents itself in the future, this
check can be relaxed further.
We also no longer use the last-byte access to simulate helper memory
access, but instead go through check_mem_region_access. Since this no
longer updates our max_ctx_offset, we must do so manually, to keep track
of the maximum offset at which the program ctx may be accessed.
Take care to ensure that when arg_type is ARG_PTR_TO_CTX, we do not
relax any fixed or variable offset constraints around PTR_TO_CTX even in
syscall programs, and require them to be passed unmodified. There are
several reasons why this is necessary. First, if we pass a modified ctx,
then the global subprog's accesses will not update the max_ctx_offset to
its true maximum offset, and can lead to out of bounds accesses. Second,
tail called program (or extension program replacing global subprog) where
their max_ctx_offset exceeds the program they are being called from can
also cause issues. For the latter, unmodified PTR_TO_CTX is the first
requirement for the fix, the second is ensuring max_ctx_offset >= the
program they are being called from, which has to be a separate change
not made in this commit.
All in all, we can hint using arg_type when we expect ARG_PTR_TO_CTX and
make our relaxation around offsets conditional on it.
Drop coverage of syscall tests from verifier_ctx.c temporarily for
negative cases until they are updated in subsequent commits.
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260406194403.1649608-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When a dev-bound-only BPF program (BPF_F_XDP_DEV_BOUND_ONLY) undergoes
JIT compilation with constant blinding enabled (bpf_jit_harden >= 2),
bpf_jit_blind_constants() clones the program. The original prog is then
freed in bpf_jit_prog_release_other(), which updates aux->prog to point
to the surviving clone, but fails to update offload->prog.
This leaves offload->prog pointing to the freed original program. When
the network namespace is subsequently destroyed, cleanup_net() triggers
bpf_dev_bound_netdev_unregister(), which iterates ondev->progs and calls
__bpf_prog_offload_destroy(offload->prog). Accessing the freed prog
causes a page fault:
BUG: unable to handle page fault for address: ffffc900085f1038
Workqueue: netns cleanup_net
RIP: 0010:__bpf_prog_offload_destroy+0xc/0x80
Call Trace:
__bpf_offload_dev_netdev_unregister+0x257/0x350
bpf_dev_bound_netdev_unregister+0x4a/0x90
unregister_netdevice_many_notify+0x2a2/0x660
...
cleanup_net+0x21a/0x320
The test sequence that triggers this reliably is:
1. Set net.core.bpf_jit_harden=2 (echo 2 > /proc/sys/net/core/bpf_jit_harden)
2. Run xdp_metadata selftest, which creates a dev-bound-only XDP
program on a veth inside a netns (./test_progs -t xdp_metadata)
3. cleanup_net -> page fault in __bpf_prog_offload_destroy
Dev-bound-only programs are unique in that they have an offload structure
but go through the normal JIT path instead of bpf_prog_offload_compile().
This means they are subject to constant blinding's prog clone-and-replace,
while also having offload->prog that must stay in sync.
Fix this by updating offload->prog in bpf_jit_prog_release_other(),
alongside the existing aux->prog update. Both are back-pointers to
the prog that must be kept in sync when the prog is replaced.
Fixes: 2b3486bc2d ("bpf: Introduce device-bound XDP programs")
Signed-off-by: MingTao Huang <mintaohuang@tencent.com>
Link: https://lore.kernel.org/r/tencent_BCF692F45859CCE6C22B7B0B64827947D406@qq.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
list_next_entry() never returns NULL -- when the current element is the
last entry it wraps to the list head via container_of(). The subsequent
NULL check is therefore dead code and get_next_key() never returns
-ENOENT for the last element, instead reading storage->key from a bogus
pointer that aliases internal map fields and copying the result to
userspace.
Replace it with list_entry_is_head() so the function correctly returns
-ENOENT when there are no more entries.
Fixes: de9cbbaadb ("bpf: introduce cgroup storage maps")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Sun Jian <sun.jian.kdev@gmail.com>
Acked-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/20260403132951.43533-2-bestswngs@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When a BPF_F_LOCK update races with a concurrent delete, the freed
element can be immediately recycled by alloc_htab_elem(). The fast path
in htab_map_update_elem() performs a lockless lookup and then calls
copy_map_value_locked() under the element's spin_lock. If
alloc_htab_elem() recycles the same memory, it overwrites the value
with plain copy_map_value(), without taking the spin_lock, causing
torn writes.
Use copy_map_value_locked() when BPF_F_LOCK is set so the new element's
value is written under the embedded spin_lock, serializing against any
stale lock holders.
Fixes: 96049f3afd ("bpf: introduce BPF_F_LOCK flag")
Reported-by: Aaron Esau <aaron1esau@gmail.com>
Closes: https://lore.kernel.org/all/CADucPGRvSRpkneb94dPP08YkOHgNgBnskTK6myUag_Mkjimihg@mail.gmail.com/
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260401-bpf_map_torn_writes-v1-1-782d071c55e7@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The static stack liveness analysis needs to know how many bytes a
helper or kfunc accesses through a stack pointer argument, so it can
precisely mark the affected stack slots as stack 'def' or 'use'.
Add bpf_helper_stack_access_bytes() and bpf_kfunc_stack_access_bytes()
which resolve the access size for a given call argument.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260403024422.87231-7-alexei.starovoitov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add two passes before the main verifier pass:
bpf_compute_const_regs() is a forward dataflow analysis that tracks
register values in R0-R9 across the program using fixed-point
iteration in reverse postorder. Each register is tracked with
a six-state lattice:
UNVISITED -> CONST(val) / MAP_PTR(map_index) /
MAP_VALUE(map_index, offset) / SUBPROG(num) -> UNKNOWN
At merge points, if two paths produce the same state and value for
a register, it stays; otherwise it becomes UNKNOWN.
The analysis handles:
- MOV, ADD, SUB, AND with immediate or register operands
- LD_IMM64 for plain constants, map FDs, map values, and subprogs
- LDX from read-only maps: constant-folds the load by reading the
map value directly via bpf_map_direct_read()
Results that fit in 32 bits are stored per-instruction in
insn_aux_data and bitmasks.
bpf_prune_dead_branches() uses the computed constants to evaluate
conditional branches. When both operands of a conditional jump are
known constants, the branch outcome is determined statically and the
instruction is rewritten to an unconditional jump.
The CFG postorder is then recomputed to reflect new control flow.
This eliminates dead edges so that subsequent liveness analysis
doesn't propagate through dead code.
Also add runtime sanity check to validate that precomputed
constants match the verifier's tracked state.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260403024422.87231-5-alexei.starovoitov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a pass that sorts subprogs in topological order so that iterating
subprog_topo_order[] walks leaf subprogs first, then their callers.
This is computed as a DFS post-order traversal of the CFG.
The pass runs after check_cfg() to ensure the CFG has been validated
before traversing and after postorder has been computed to avoid
walking dead code.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260403024422.87231-3-alexei.starovoitov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch fixes the invariant violations that can happen after we
refine ranges & tnum based on an incorrectly-detected branch condition.
For example, the branch is always true, but we miss it in
is_branch_taken; we then refine based on the branch being false and end
up with incoherent ranges (e.g. umax < umin).
To avoid this, we can simulate the refinement on both branches. More
specifically, this patch simulates both branches taken using
regs_refine_cond_op and reg_bounds_sync. If the resulting register
states are ill-formed on one of the branches, is_branch_taken can mark
that branch as "never taken".
On a more formal note, we can deduce a branch is not taken when
regs_refine_cond_op or reg_bounds_sync returns an ill-formed state
because the branch operators are sound (verified with Agni [1]).
Soundness means that the verifier is guaranteed to produce sound
outputs on the taken branches. On the non-taken branch (explored
because of imprecision in the bounds), the verifier is free to produce
any output. We use ill-formedness as a signal that the branch is dead
and prune that branch.
This patch moves the refinement logic for both branches from
reg_set_min_max to their own function, simulate_both_branches_taken,
which is called from is_scalar_branch_taken. As a result,
reg_set_min_max now only runs sanity checks and has been renamed to
reg_bounds_sanity_check_branches to reflect that.
We have had five patches fixing specific cases of invariant violations
in the past, all added with selftests:
- commit fbc7aef517 ("bpf: Fix u32/s32 bounds when ranges cross
min/max boundary")
- commit efc11a6678 ("bpf: Improve bounds when tnum has a single
possible value")
- commit f41345f47f ("bpf: Use tnums for JEQ/JNE is_branch_taken
logic")
- commit 00bf8d0c6c ("bpf: Improve bounds when s64 crosses sign
boundary")
- commit 6279846b9b ("bpf: Forget ranges when refining tnum after
JSET")
To confirm that this patch addresses all invariant violations, we have
also reverted those five commits and verified that their related
selftests don't cause any invariant violation warnings anymore. Those
selftests still fail but only because of misdetected branches or
less-precise bounds than expected. This demonstrates that the current
patch is enough to avoid the invariant violation warning AND that the
previous five patches are still useful to improve branch detection.
In addition to the selftests, this change was also tested with the
Cilium complexity test suite: all programs were successfully loaded and
it didn't change the number of processed instructions.
Link: https://github.com/bpfverif/agni [1]
Reported-by: syzbot+c950cc277150935cc0b5@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c950cc277150935cc0b5
Co-developed-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Co-developed-by: Srinivas Narayana <srinivas.narayana@rutgers.edu>
Signed-off-by: Srinivas Narayana <srinivas.narayana@rutgers.edu>
Co-developed-by: Santosh Nagarakatte <santosh.nagarakatte@rutgers.edu>
Signed-off-by: Santosh Nagarakatte <santosh.nagarakatte@rutgers.edu>
Signed-off-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/a166b54a3cbbbdbcdf8a87f53045f1097176218b.1775142354.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In the subsequent commit, to prune dead branches we will rely on
detecting ill-formed ranges using range_bounds_violations()
(e.g., umin > umax) after refining register bounds using
regs_refine_cond_op().
However, reg_bounds_sync() can sometimes "repair" ill-formed bounds,
potentially masking a violation that was produced by
regs_refine_cond_op().
This commit modifies reg_bounds_sync() to exit early if an invariant
violation is already present in the input.
This ensures ill-formed reg_states remain ill-formed after
reg_bounds_sync(), allowing simulate_both_branches_taken() to correctly
identify dead branches with a single check to range_bounds_violation().
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/73127d628841c59cb7423d6bdcd204bf90bcdc80.1775142354.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In a subsequent patch, the regs_refine_cond_op and reg_bounds_sync
functions will be called in is_branch_taken instead of reg_set_min_max,
to simulate each branch's outcome. Since they will run before we branch
out, these two functions will need to work on temporary registers for
the two branches.
This refactoring patch prepares for that change, by introducing the
temporary registers on bpf_verifier_env and using them in
reg_set_min_max.
This change also allows us to save one fake_reg slot as we don't need to
allocate an additional temporary buffer in case of a BPF_K condition.
Finally, you may notice that this patch removes the check for
"false_reg1 == false_reg2" in reg_set_min_max. That check was introduced
in commit d43ad9da80 ("bpf: Skip bounds adjustment for conditional
jumps on same scalar register") to avoid an invariant violation. Given
that "env->false_reg1 == env->false_reg2" doesn't make sense and
invariant violations are addressed in a subsequent commit, this patch
just removes the check.
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Co-developed-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Signed-off-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/260b0270052944a420e1c56e6a92df4d43cadf03.1775142354.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit refactors reg_bounds_sanity_check to factor out the logic
that performs the sanity check from the logic that does the reporting.
Signed-off-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/198ec3e69343e2c46dc9cbe2b1bc9be9ae2df5bd.1775142354.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When backtrack_insn encounters a BPF_STX instruction with BPF_ATOMIC
and BPF_FETCH, the src register (or r0 for BPF_CMPXCHG) also acts as
a destination, thus receiving the old value from the memory location.
The current backtracking logic does not account for this. It treats
atomic fetch operations the same as regular stores where the src
register is only an input. This leads the backtrack_insn to fail to
propagate precision to the stack location, which is then not marked
as precise!
Later, the verifier's path pruning can incorrectly consider two states
equivalent when they differ in terms of stack state. Meaning, two
branches can be treated as equivalent and thus get pruned when they
should not be seen as such.
Fix it as follows: Extend the BPF_LDX handling in backtrack_insn to
also cover atomic fetch operations via is_atomic_fetch_insn() helper.
When the fetch dst register is being tracked for precision, clear it,
and propagate precision over to the stack slot. For non-stack memory,
the precision walk stops at the atomic instruction, same as regular
BPF_LDX. This covers all fetch variants.
Before:
0: (b7) r1 = 8 ; R1=8
1: (7b) *(u64 *)(r10 -8) = r1 ; R1=8 R10=fp0 fp-8=8
2: (b7) r2 = 0 ; R2=0
3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) ; R2=8 R10=fp0 fp-8=mmmmmmmm
4: (bf) r3 = r10 ; R3=fp0 R10=fp0
5: (0f) r3 += r2
mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r2 stack= before 4: (bf) r3 = r10
mark_precise: frame0: regs=r2 stack= before 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2)
mark_precise: frame0: regs=r2 stack= before 2: (b7) r2 = 0
6: R2=8 R3=fp8
6: (b7) r0 = 0 ; R0=0
7: (95) exit
After:
0: (b7) r1 = 8 ; R1=8
1: (7b) *(u64 *)(r10 -8) = r1 ; R1=8 R10=fp0 fp-8=8
2: (b7) r2 = 0 ; R2=0
3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) ; R2=8 R10=fp0 fp-8=mmmmmmmm
4: (bf) r3 = r10 ; R3=fp0 R10=fp0
5: (0f) r3 += r2
mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r2 stack= before 4: (bf) r3 = r10
mark_precise: frame0: regs=r2 stack= before 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2)
mark_precise: frame0: regs= stack=-8 before 2: (b7) r2 = 0
mark_precise: frame0: regs= stack=-8 before 1: (7b) *(u64 *)(r10 -8) = r1
mark_precise: frame0: regs=r1 stack= before 0: (b7) r1 = 8
6: R2=8 R3=fp8
6: (b7) r0 = 0 ; R0=0
7: (95) exit
Fixes: 5ffa25502b ("bpf: Add instructions for atomic_[cmp]xchg")
Fixes: 5ca419f286 ("bpf: Add BPF_FETCH field / create atomic_fetch_add instruction")
Reported-by: STAR Labs SG <info@starlabs.sg>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260331222020.401848-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
check_mem_access() matches PTR_TO_BUF via base_type() which strips
PTR_MAYBE_NULL, allowing direct dereference without a null check.
Map iterator ctx->key and ctx->value are PTR_TO_BUF | PTR_MAYBE_NULL.
On stop callbacks these are NULL, causing a kernel NULL dereference.
Add a type_may_be_null() guard to the PTR_TO_BUF branch, matching the
existing PTR_TO_BTF_ID pattern.
Fixes: 20b2aff4bc ("bpf: Introduce MEM_RDONLY flag")
Signed-off-by: Qi Tang <tpluszz77@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260402092923.38357-2-tpluszz77@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Replace bpf_mem_alloc/bpf_mem_free with kmalloc_nolock/kfree_nolock for
bpf_dynptr_file_impl, continuing the migration away from bpf_mem_alloc
now that kmalloc can be used from NMI context.
freader_cleanup() runs before kfree_nolock() while the dynptr still
holds exclusive access, so plain kfree_nolock() is safe — no concurrent
readers can access the object.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260330-kmalloc_special-v2-2-c90403f92ff0@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Replace bpf_mem_alloc/bpf_mem_free with
kmalloc_nolock/kfree_rcu for bpf_task_work_ctx.
Replace guard(rcu_tasks_trace)() with guard(rcu)() in
bpf_task_work_irq(). The function only accesses ctx struct members
(not map values), so tasks trace protection is not needed - regular
RCU is sufficient since ctx is freed via kfree_rcu. The guard in
bpf_task_work_callback() remains as tasks trace since it accesses map
values from process context.
Sleepable BPF programs hold rcu_read_lock_trace but not
regular rcu_read_lock. Since kfree_rcu
waits for a regular RCU grace period, the ctx memory can be freed
while a sleepable program is still running. Add scoped_guard(rcu)
around the pointer read and refcount tryget in
bpf_task_work_acquire_ctx to close this race window.
Since kfree_rcu uses call_rcu internally which is not safe from
NMI context, defer destruction via irq_work when irqs are disabled.
For the lost-cmpxchg path the ctx was never published, so
kfree_nolock is safe.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260330-kmalloc_special-v2-1-c90403f92ff0@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
uprobe programs are allowed to modify struct pt_regs.
Since the actual program type of uprobe is KPROBE, it can be abused to
modify struct pt_regs via kprobe+freplace when the kprobe attaches to
kernel functions.
For example,
SEC("?kprobe")
int kprobe(struct pt_regs *regs)
{
return 0;
}
SEC("?freplace")
int freplace_kprobe(struct pt_regs *regs)
{
regs->di = 0;
return 0;
}
freplace_kprobe prog will attach to kprobe prog.
kprobe prog will attach to a kernel function.
Without this patch, when the kernel function runs, its first arg will
always be set as 0 via the freplace_kprobe prog.
To fix the abuse of kprobe_write_ctx=true via kprobe+freplace, disallow
attaching freplace programs on kprobe programs with different
kprobe_write_ctx values.
Fixes: 7384893d97 ("bpf: Allow uprobe program to change context registers")
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260331145353.87606-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Recently, tracepoints were switched from using disabled preemption
(which acts as RCU read section) to SRCU-fast when they are not
faultable. This means that to do a proper grace period wait for programs
running in such tracepoints, we must use SRCU's grace period wait.
This is only for non-faultable tracepoints, faultable ones continue
using RCU Tasks Trace.
However, bpf_link_free() currently does call_rcu() for all cases when
the link is non-sleepable (hence, for tracepoints, non-faultable). Fix
this by doing a call_srcu() grace period wait.
As far RCU Tasks Trace gp -> RCU gp chaining is concerned, it is deemed
unnecessary for tracepoint programs. The link and program are either
accessed under RCU Tasks Trace protection, or SRCU-fast protection now.
The earlier logic of chaining both RCU Tasks Trace and RCU gp waits was
to generalize the logic, even if it conceded an extra RCU gp wait,
however that is unnecessary for tracepoints even before this change.
In practice no cost was paid since rcu_trace_implies_rcu_gp() was always
true. Hence we need not chaining any RCU gp after the SRCU gp.
For instance, in the non-faultable raw tracepoint, the RCU read section
of the program in __bpf_trace_run() is enclosed in the SRCU gp, likewise
for faultable raw tracepoint, the program is under the RCU Tasks Trace
protection. Hence, the outermost scope can be waited upon to ensure
correctness.
Also, sleepable programs cannot be attached to non-faultable
tracepoints, so whenever program or link is sleepable, only RCU Tasks
Trace protection is being used for the link and prog.
Fixes: a46023d561 ("tracing: Guard __DECLARE_TRACE() use of __DO_TRACE_CALL() with SRCU-fast")
Reviewed-by: Sun Jian <sun.jian.kdev@gmail.com>
Reviewed-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20260331211021.1632902-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In case rold->reg->range == BEYOND_PKT_END && rcur->reg->range == N
regsafe() may return true which may lead to current state with
valid packet range not being explored. Fix the bug.
Fixes: 6d94e741a8 ("bpf: Support for pointers beyond pkt_end.")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20260331204228.26726-1-alexei.starovoitov@gmail.com
The following kfuncs currently accept void *meta__ign argument:
* bpf_obj_new_impl
* bpf_obj_drop_impl
* bpf_percpu_obj_new_impl
* bpf_percpu_obj_drop_impl
* bpf_refcount_acquire_impl
* bpf_list_push_back_impl
* bpf_list_push_front_impl
* bpf_rbtree_add_impl
The __ign suffix is an indicator for the verifier to skip the argument
in check_kfunc_args(). Then, in fixup_kfunc_call() the verifier may
set the value of this argument to struct btf_struct_meta *
kptr_struct_meta from insn_aux_data.
BPF programs must pass a dummy NULL value when calling these kfuncs.
Additionally, the list and rbtree _impl kfuncs also accept an implicit
u64 argument, which doesn't require __ign suffix because it's a
scalar, and BPF programs explicitly pass 0.
Add new kfuncs with KF_IMPLICIT_ARGS [1], that correspond to each
_impl kfunc accepting meta__ign. The existing _impl kfuncs remain
unchanged for backwards compatibility.
To support this, add "btf_struct_meta" to the list of recognized
implicit argument types in resolve_btfids.
Implement is_kfunc_arg_implicit() in the verifier, that determines
implicit args by inspecting both a non-_impl BTF prototype of the
kfunc.
Update the special_kfunc_list in the verifier and relevant checks to
support both the old _impl and the new KF_IMPLICIT_ARGS variants of
btf_struct_meta users.
[1] https://lore.kernel.org/bpf/20260120222638.3976562-1-ihor.solodrai@linux.dev/
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260327203241.3365046-1-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A bunch of new hooks for managing block devices were added a while ago
but they weren't actually appropriately classified.
* bpf_lsm_bdev_alloc() is called when the inode for the block
device is allocated. This happens from a sleepable context so mark the
function as sleepable. When this function is called the memory for the
block device storage embedded into the inode is zeroed. That block
device cannot be meaningfully reference or interacted with at this
point. So mark it as untrusted for now.
* bpf_lsm_bdev_free() is called when the inode for the block
device is freed. A bunch of memory associated with the block device
has already been freed and there's dangling pointers in there. So mark
it as untrusted. It cannot be meaningfully referenced or interacted
with anymore. It is also called from sb->s_op->free_inode:: which
means it runs in rcu context (most of the times). So leave it as
non-sleepable.
* bpf_lsm_bdev_setintegrity() is called when a dm-verity device
is instantiated (glossing over details for simplicity of the commit
message). The block device is very much alive so it remains a trusted
hook. It's also called with device mapper's suspend lock held and so
the hook is able to sleep so mark it sleepable.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20260326-work-bpf-bdev-v2-1-5e3c58963987@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Validate layout if present, but because the kernel must be
strict in what it accepts, reject BTF with unsupported kinds,
even if they are in the layout information.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260326145444.2076244-8-alan.maguire@oracle.com
The DEVMAP_HASH branch in dev_map_redirect_multi() uses
hlist_for_each_entry_safe() to iterate hash buckets, but this function
runs under RCU protection (called from xdp_do_generic_redirect_map()
in softirq context). Concurrent writers (__dev_map_hash_update_elem,
dev_map_hash_delete_elem) modify the list using RCU primitives
(hlist_add_head_rcu, hlist_del_rcu).
hlist_for_each_entry_safe() performs plain pointer dereferences without
rcu_dereference(), missing the acquire barrier needed to pair with
writers' rcu_assign_pointer(). On weakly-ordered architectures (ARM64,
POWER), a reader can observe a partially-constructed node. It also
defeats CONFIG_PROVE_RCU lockdep validation and KCSAN data-race
detection.
Replace with hlist_for_each_entry_rcu() using rcu_read_lock_bh_held()
as the lockdep condition, consistent with the rcu_dereference_check()
used in the DEVMAP (non-hash) branch of the same functions. Also fix
the same incorrect lockdep_is_held(&dtab->index_lock) condition in
dev_map_enqueue_multi(), where the lock is not held either.
Fixes: e624d4ed4a ("xdp: Extend xdp_redirect_map with broadcast support")
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260320072645.16731-1-devnexen@gmail.com
The function btf_check_kfunc_arg_match() was refactored into
check_kfunc_args() by commit 00b85860fe ("bpf: Rewrite kfunc
argument handling"). Update the comment accordingly.
Assisted-by: unnamed:deepseek-v3.2 coccinelle
Signed-off-by: Kexin Sun <kexinsun@smail.nju.edu.cn>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/r/20260321105658.6006-1-kexinsun@smail.nju.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add BPF verifier support for single- and multi-level pointer
parameters and return values in BPF trampolines by treating these
parameters as SCALAR_VALUE.
This extends the existing support for int and void pointers that are
already treated as SCALAR_VALUE.
This provides consistent logic for single and multi-level pointers:
if a type is treated as SCALAR for a single-level pointer, the same
applies to multi-level pointers. The exception is pointer-to-struct,
which is currently PTR_TO_BTF_ID for single-level but treated as
scalar for multi-level pointers since the verifier lacks context
to infer the size of target memory regions.
Safety is ensured by existing BTF verification, which rejects invalid
pointer types at the BTF verification stage.
Signed-off-by: Slava Imameev <slava.imameev@crowdstrike.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260314082127.7939-2-slava.imameev@crowdstrike.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The current implementation only checks whether the first argument is
refcounted. Fix this by iterating over all arguments.
Signed-off-by: Keisuke Nishimura <keisuke.nishimura@inria.fr>
Fixes: 38f1e66abd ("bpf: Do not allow tail call in strcut_ops program with __ref argument")
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/r/20260320130219.63711-1-keisuke.nishimura@inria.fr
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
kvmemdup_bpfptr() returns -EFAULT when the user pointer cannot be
copied, and -ENOMEM on allocation failure. The error path always
returned -ENOMEM, misreporting bad addresses as out-of-memory.
Return PTR_ERR(sig) so user space gets the correct errno.
Signed-off-by: Weixie Cui <cuiweixie@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/tencent_C9C5B2B28413D6303D505CD02BFEA4708C07@qq.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Simplify tnum_step() from a 10-variable algorithm into a straight
line sequence of bitwise operations.
Problem Reduction:
tnum_step(): Given a tnum `(tval, tmask)` where `tval & tmask == 0`,
and a value `z` with `tval ≤ z < (tval | tmask)`, find the smallest
`r > z`, a tnum-satisfying value, i.e., `r & ~tmask == tval`.
Every tnum-satisfying value has the form tval | s where s is a subset
of tmask bits (s & ~tmask == 0). Since tval and tmask are disjoint:
tval | s = tval + s
Similarly z = tval + d where d = z - tval, so r > z becomes:
tval + s > tval + d
s > d
The problem reduces to: find the smallest s, a subset of tmask, such
that s > d.
Notice that `s` must be a subset of tmask, the problem now is simplified.
Algorithm:
The mask bits of `d` form a "counter" that we want to increment by one,
but the counter has gaps at the fixed-bit positions. A normal +1 would
stop at the first 0-bit it meets; we need it to skip over fixed-bit
gaps and land on the next mask bit.
Step 1 -- plug the gaps:
d | carry_mask | ~tmask
- ~tmask fills all fixed-bit positions with 1.
- carry_mask = (1 << fls64(d & ~tmask)) - 1 fills all positions
(including mask positions) below the highest non-mask bit of d.
After this, the only remaining 0s are mask bits above the highest
non-mask bit of d where d is also 0 -- exactly the positions where
the carry can validly land.
Step 2 -- increment:
(d | carry_mask | ~tmask) + 1
Adding 1 flips all trailing 1s to 0 and sets the first 0 to 1. Since
every gap has been plugged, that first 0 is guaranteed to be a mask bit
above all non-mask bits of d.
Step 3 -- mask:
((d | carry_mask | ~tmask) + 1) & tmask
Strip the scaffolding, keeping only mask bits. Call the result inc.
Step 4 -- result:
tval | inc
Reattach the fixed bits.
A simple 8-bit example:
tmask: 1 1 0 1 0 1 1 0
d: 1 0 1 0 0 0 1 0 (d = 162)
^
non-mask 1 at bit 5
With carry_mask = 0b00111111 (smeared from bit 5):
d|carry|~tm 1 0 1 1 1 1 1 1
+ 1 1 1 0 0 0 0 0 0
& tmask 1 1 0 0 0 0 0 0
The patch passes my local test: test_verifier, test_progs for
`-t verifier` and `-t reg_bounds`.
CBMC shows the new code is equiv to original one[1], and
a lean4 proof of correctness is available[2]:
theorem tnumStep_correct (tval tmask z : BitVec 64)
-- Precondition: valid tnum and input z
(h_consistent : (tval &&& tmask) = 0)
(h_lo : tval ≤ z)
(h_hi : z < (tval ||| tmask)) :
-- Postcondition: r must be:
-- (1) tnum member
-- (2) z < r
-- (3) for any other member w > z, r <= w
let r := tnumStep tval tmask z
satisfiesTnum64 r tval tmask ∧
tval ≤ r ∧ r ≤ (tval ||| tmask) ∧
z < r ∧
∀ w, satisfiesTnum64 w tval tmask → z < w → r ≤ w := by
-- unfold definition
unfold tnumStep satisfiesTnum64
simp only []
refine ⟨?_, ?_, ?_, ?_, ?_⟩
-- the solver proves each conjunct
· bv_decide
· bv_decide
· bv_decide
· bv_decide
· intro w hw1 hw2; bv_decide
[1] https://github.com/eddyz87/tnum-step-verif/blob/master/main.c
[2] https://pastebin.com/raw/czHKiyY0
Signed-off-by: Hao Sun <hao.sun@inf.ethz.ch>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Reviewed-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Link: https://lore.kernel.org/r/20260320162336.166542-1-hao.sun@inf.ethz.ch
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This was renamed in commit 23ef9d4397 ("kcfi: Rename CONFIG_CFI_CLANG
to CONFIG_CFI") as it is now a compiler-agnostic option. Using the wrong
name results in the code getting compiled out. Meaning the CFI failures
for btf_dtor_kfunc_t would still trigger.
Fixes: 99fde4d062 ("bpf, btf: Enforce destructor kfunc type with CFI")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260312183818.2721750-1-cmllamas@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since commit 603b441623 ("bpf: Update the bpf_prog_calc_tag to use
SHA256") made BPF program tags use SHA-256 instead of SHA-1, the header
<crypto/sha1.h> no longer needs to be included. Remove the relevant
inclusions so that they no longer unnecessarily come up in searches for
which kernel code is still using the obsolete SHA-1 algorithm.
Since net/ipv6/addrconf.c was relying on the transitive inclusion of
<crypto/sha1.h> (for an unrelated purpose) via <linux/filter.h>, make it
include <crypto/sha1.h> explicitly in order to keep that file building.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/20260314214555.112386-1-ebiggers@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cross-merge BPF and other fixes after downstream PR.
Minor conflicts in:
tools/testing/selftests/bpf/progs/exceptions_fail.c
tools/testing/selftests/bpf/progs/verifier_bounds.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jenny reported that in sync_linked_regs() the BPF_ADD_CONST32 flag is
checked on known_reg (the register narrowed by a conditional branch)
instead of reg (the linked target register created by an alu32 operation).
Example case with reg:
1. r6 = bpf_get_prandom_u32()
2. r7 = r6 (linked, same id)
3. w7 += 5 (alu32 -- r7 gets BPF_ADD_CONST32, zero-extended by CPU)
4. if w6 < 0xFFFFFFFC goto safe (narrows r6 to [0xFFFFFFFC, 0xFFFFFFFF])
5. sync_linked_regs() propagates to r7 but does NOT call zext_32_to_64()
6. Verifier thinks r7 is [0x100000001, 0x100000004] instead of [1, 4]
Since known_reg above does not have BPF_ADD_CONST32 set above, zext_32_to_64()
is never called on alu32-derived linked registers. This causes the verifier
to track incorrect 64-bit bounds, while the CPU correctly zero-extends the
32-bit result.
The code checking known_reg->id was correct however (see scalars_alu32_wrap
selftest case), but the real fix needs to handle both directions - zext
propagation should be done when either register has BPF_ADD_CONST32, since
the linked relationship involves a 32-bit operation regardless of which
side has the flag.
Example case with known_reg (exercised also by scalars_alu32_wrap):
1. r1 = r0; w1 += 0x100 (alu32 -- r1 gets BPF_ADD_CONST32)
2. if r1 > 0x80 - known_reg = r1 (has BPF_ADD_CONST32), reg = r0 (doesn't)
Hence, fix it by checking for (reg->id | known_reg->id) & BPF_ADD_CONST32.
Moreover, sync_linked_regs() also has a soundness issue when two linked
registers used different ALU widths: one with BPF_ADD_CONST32 and the
other with BPF_ADD_CONST64. The delta relationship between linked registers
assumes the same arithmetic width though. When one register went through
alu32 (CPU zero-extends the 32-bit result) and the other went through
alu64 (no zero-extension), the propagation produces incorrect bounds.
Example:
r6 = bpf_get_prandom_u32() // fully unknown
if r6 >= 0x100000000 goto out // constrain r6 to [0, U32_MAX]
r7 = r6
w7 += 1 // alu32: r7.id = N | BPF_ADD_CONST32
r8 = r6
r8 += 2 // alu64: r8.id = N | BPF_ADD_CONST64
if r7 < 0xFFFFFFFF goto out // narrows r7 to [0xFFFFFFFF, 0xFFFFFFFF]
At the branch on r7, sync_linked_regs() runs with known_reg=r7
(BPF_ADD_CONST32) and reg=r8 (BPF_ADD_CONST64). The delta path
computes:
r8 = r7 + (delta_r8 - delta_r7) = 0xFFFFFFFF + (2 - 1) = 0x100000000
Then, because known_reg->id has BPF_ADD_CONST32, zext_32_to_64(r8) is
called, truncating r8 to [0, 0]. But r8 used a 64-bit ALU op -- the
CPU does NOT zero-extend it. The actual CPU value of r8 is
0xFFFFFFFE + 2 = 0x100000000, not 0. The verifier now underestimates
r8's 64-bit bounds, which is a soundness violation.
Fix sync_linked_regs() by skipping propagation when the two registers
have mixed ALU widths (one BPF_ADD_CONST32, the other BPF_ADD_CONST64).
Lastly, fix regsafe() used for path pruning: the existing checks used
"& BPF_ADD_CONST" to test for offset linkage, which treated
BPF_ADD_CONST32 and BPF_ADD_CONST64 as equivalent.
Fixes: 7a433e5193 ("bpf: Support negative offsets, BPF_SUB, and alu32 for linked register tracking")
Reported-by: Jenny Guanni Qu <qguanni@gmail.com>
Co-developed-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260319211507.213816-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
maybe_fork_scalars() is called for both BPF_AND and BPF_OR when the
source operand is a constant. When dst has signed range [-1, 0], it
forks the verifier state: the pushed path gets dst = 0, the current
path gets dst = -1.
For BPF_AND this is correct: 0 & K == 0.
For BPF_OR this is wrong: 0 | K == K, not 0.
The pushed path therefore tracks dst as 0 when the runtime value is K,
producing an exploitable verifier/runtime divergence that allows
out-of-bounds map access.
Fix this by passing env->insn_idx (instead of env->insn_idx + 1) to
push_stack(), so the pushed path re-executes the ALU instruction with
dst = 0 and naturally computes the correct result for any opcode.
Fixes: bffacdb80b ("bpf: Recognize special arithmetic shift in the verifier")
Signed-off-by: Daniel Wade <danjwade95@gmail.com>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260314021521.128361-2-danjwade95@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The BPF interpreter's signed 32-bit division and modulo handlers use
the kernel abs() macro on s32 operands. The abs() macro documentation
(include/linux/math.h) explicitly states the result is undefined when
the input is the type minimum. When DST contains S32_MIN (0x80000000),
abs((s32)DST) triggers undefined behavior and returns S32_MIN unchanged
on arm64/x86. This value is then sign-extended to u64 as
0xFFFFFFFF80000000, causing do_div() to compute the wrong result.
The verifier's abstract interpretation (scalar32_min_max_sdiv) computes
the mathematically correct result for range tracking, creating a
verifier/interpreter mismatch that can be exploited for out-of-bounds
map value access.
Introduce abs_s32() which handles S32_MIN correctly by casting to u32
before negating, avoiding signed overflow entirely. Replace all 8
abs((s32)...) call sites in the interpreter's sdiv32/smod32 handlers.
s32 is the only affected case -- the s64 division/modulo handlers do
not use abs().
Fixes: ec0e2da95f ("bpf: Support new signed div/mod instructions.")
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Jenny Guanni Qu <qguanni@gmail.com>
Link: https://lore.kernel.org/r/20260311011116.2108005-2-qguanni@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The sleepable context check for global function calls in
check_func_call() open-codes the same checks that in_sleepable_context()
already performs. Replace the open-coded check with a call to
in_sleepable_context() and use non_sleepable_context_description() for
the error message, consistent with check_helper_call() and
check_kfunc_call().
Note that in_sleepable_context() also checks active_locks, which
overlaps with the existing active_locks check above it. However, the two
checks serve different purposes: the active_locks check rejects all
global function calls while holding a lock (not just sleepable ones), so
it must remain as a separate guard.
Update the expected error messages in the irq and preempt_lock selftests
to match.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260318174327.3151925-4-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
check_kfunc_call() has multiple scattered checks that reject sleepable
kfuncs in various non-sleepable contexts (RCU, preempt-disabled, IRQ-
disabled). These are the same conditions already checked by
in_sleepable_context(), so replace them with a single consolidated
check.
This also simplifies the preempt lock tracking by flattening the nested
if/else structure into a linear chain: preempt_disable increments,
preempt_enable checks for underflow and decrements. The sleepable check
is kept as a separate block since it is logically distinct from the lock
accounting.
No functional change since in_sleepable_context() checks all the same
state (active_rcu_locks, active_preempt_locks, active_locks,
active_irq_id, in_sleepable).
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260318174327.3151925-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
check_helper_call() prints the error message for every
env->cur_state->active* element when calling a sleepable helper.
Consolidate all of them into a single print statement.
The check for env->cur_state->active_locks was not part of the removed
print statements and will not be triggered with the consolidated print
as well because it is checked in do_check() before check_helper_call()
is even reached.
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260318174327.3151925-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
process_bpf_exit_full() passes check_lock = !curframe to
check_resource_leak(), which is false in cases when bpf_throw() is
called from a static subprog. This makes check_resource_leak() to skip
validation of active_rcu_locks, active_preempt_locks, and
active_irq_id on exception exits from subprogs.
At runtime bpf_throw() unwinds the stack via ORC without releasing any
user-acquired locks, which may cause various issues as the result.
Fix by setting check_lock = true for exception exits regardless of
curframe, since exceptions bypass all intermediate frame
cleanup. Update the error message prefix to "bpf_throw" for exception
exits to distinguish them from normal BPF_EXIT.
Fix reject_subprog_with_rcu_read_lock test which was previously
passing for the wrong reason. Test program returned directly from the
subprog call without closing the RCU section, so the error was
triggered by the unclosed RCU lock on normal exit, not by
bpf_throw. Update __msg annotations for affected tests to match the
new "bpf_throw" error prefix.
The spin_lock case is not affected because they are already checked [1]
at the call site in do_check_insn() before bpf_throw can run.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/kernel/bpf/verifier.c?h=v7.0-rc4#n21098
Assisted-by: Claude:claude-opus-4-6
Fixes: f18b03faba ("bpf: Implement BPF exceptions")
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260320000809.643798-1-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
While very unlikely, local storage theoretically may leak memory of the
size of "struct bpf_local_storage" when destroy() fails to grab
local_storage->lock and initializes selem->local_storage before other
racing map_free() see it. Warn the user to allow debugging the issue
instead of leaking the memory silently.
Note that test_maps in bpf selftests already stress tested
bpf_selem_unlink_nofail() by creating 4096 sockets and then immediately
destroying them in multiple threads. With 64 threads, 64 x 4096 socket
local storages were created and destroyed during the test and no warning
in the function were triggered.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://patch.msgid.link/20260318224219.615105-1-ameryhung@gmail.com
Currently, local storage may deadlock when deferring freeing selem or
local storage through kfree_rcu(), call_rcu() or call_rcu_tasks_trace()
in NMI or reentrant. Since deleting selem in NMI is an unlikely use
case, partially mitigate it by returning error when calling from
bpf_xxx_storage_delete() helpers in NMI. Note that, it is still possible
to deadlock through reentrant. A full mitigation requires returning
error when irqs_disabled() is true, which, however is too heavy-handed
for bpf_xxx_storage_delete().
The long-term solution requires _nolock versions of call_rcu. Another
possible solution is to defer the free through irq_work [0], but it
would grow the size of selem, which is non-ideal.
The check is only needed in bpf_selem_unlink(), which is used by helpers
and syscalls. bpf_selem_unlink_nofail() is fine as it is called during
map and owner tear down that never run in NMI or reentrant.
[0] https://lore.kernel.org/bpf/20260205190233.912-1-alexei.starovoitov@gmail.com/
Fixes: a10787e6d5 ("bpf: Enable task local storage for tracing programs")
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://patch.msgid.link/20260319025716.2361065-1-ameryhung@gmail.com
Gregory reported in [0] that the global_map_resize test when run in
repeatedly ends up failing during program load. This stems from the fact
that BTF reference has not dropped to zero after the previous run's
module is unloaded, and the older module's BTF is still discoverable and
visible. Later, in libbpf, load_module_btfs() will find the ID for this
stale BTF, open its fd, and then it will be used during program load
where later steps taking module reference using btf_try_get_module()
fail since the underlying module for the BTF is gone.
Logically, once a module is unloaded, it's associated BTF artifacts
should become hidden. The BTF object inside the kernel may still remain
alive as long its reference counts are alive, but it should no longer be
discoverable.
To fix this, let us call btf_free_id() from the MODULE_STATE_GOING case
for the module unload to free the BTF associated IDR entry, and disable
its discovery once module unload returns to user space. If a race
happens during unload, the outcome is non-deterministic anyway. However,
user space should be able to rely on the guarantee that once it has
synchronously established a successful module unload, no more stale
artifacts associated with this module can be obtained subsequently.
Note that we must be careful to not invoke btf_free_id() in btf_put()
when btf_is_module() is true now. There could be a window where the
module unload drops a non-terminal reference, frees the IDR, but the
same ID gets reused and the second unconditional btf_free_id() ends up
releasing an unrelated entry.
To avoid a special case for btf_is_module() case, set btf->id to zero to
make btf_free_id() idempotent, such that we can unconditionally invoke it
from btf_put(), and also from the MODULE_STATE_GOING case. Since zero is
an invalid IDR, the idr_remove() should be a noop.
Note that we can be sure that by the time we reach final btf_put() for
btf_is_module() case, the btf_free_id() is already done, since the
module itself holds the BTF reference, and it will call this function
for the BTF before dropping its own reference.
[0]: https://lore.kernel.org/bpf/cover.1773170190.git.grbell@redhat.com
Fixes: 36e68442d1 ("bpf: Load and verify kernel module BTFs")
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Reported-by: Gregory Bell <grbell@redhat.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260312205307.1346991-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The BPF verifier currently enforces a call stack depth of 8 frames,
regardless of the actual stack space consumption of those frames. The
limit is necessary for static call stacks, because the bookkeeping data
structures used by the verifier when stepping into static functions
during verification only support 8 stack frames. However, this
limitation only matters for static stack frames: Global subprogs are
verified by themselves and do not require limiting the call depth.
Relax this limitation to only apply to static stack frames. Verification
now only fails when there is a sequence of 8 calls to non-global
subprogs. Calling into a global subprog resets the counter. This allows
deeper call stacks, provided all frames still fit in the stack.
The change does not increase the maximum size of the call stack, only
the maximum number of frames we can place in it.
Also change the progs/test_global_func3.c selftest to use static
functions, since with the new patch it would otherwise unexpectedly
pass verification.
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260316161225.128011-2-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In commit 5dbb19b16a ("bpf: Add third round of bounds deduction"), I
added a new round of bounds deduction because two rounds were not enough
to converge to a fixed point. This commit slightly refactor the bounds
deduction logic such that two rounds are enough.
In [1], Eduard noticed that after we improved the refinement logic, a
third call to the bounds deduction (__reg_deduce_bounds) was needed to
converge to a fixed point. More specifically, we needed this third call
to improve the s64 range using the s32 range. We added the third call
and postponed a more detailed analysis of the refinement logic.
I've been looking into this more recently. The register refinement
consists of the following calls.
__update_reg_bounds();
3 x __reg_deduce_bounds() {
deduce_bounds_32_from_64();
deduce_bounds_32_from_32();
deduce_bounds_64_from_64();
deduce_bounds_64_from_32();
};
__reg_bound_offset();
__update_reg_bounds();
From this, we can observe that we first improve the 32bit ranges from
the 64bit ranges in deduce_bounds_32_from_64, then improve the 64bit
ranges on their own in deduce_bounds_64_from_64. Intuitively, if we
were to improve the 64bit ranges on their own *before* we use them to
improve the 32bit ranges, we may reach a fixed point earlier.
In a similar manner, using CBMC, Eduard found that it's best to improve
the 32bit ranges on their own *after* we've improve them using the 64bit
ranges. That is, running deduce_bounds_32_from_32 after
deduce_bounds_32_from_64.
These changes allow us to lose one call to __reg_deduce_bounds. Without
this reordering, the test "verifier_bounds/bounds deduction cross sign
boundary, negative overlap" fails when removing one call to
__reg_deduce_bounds. In some cases, this change can even improve
precision a little bit, as illustrated in the new selftest in the next
patch.
As expected, this change didn't have any impact on the number of
instructions processed when running it through the Cilium complexity
test suite [2].
Link: https://lore.kernel.org/bpf/aIKtSK9LjQXB8FLY@mail.gmail.com/ [1]
Link: https://pchaigno.github.io/test-verifier-complexity.html [2]
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Co-developed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/1b00d2749ec4c774c3ada84e265ac7fda72cfe56.1773401138.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF_ST | BPF_PROBE_MEM32 immediate stores are not handled by
bpf_jit_blind_insn(), allowing user-controlled 32-bit immediates to
survive unblinded into JIT-compiled native code when bpf_jit_harden >= 1.
The root cause is that convert_ctx_accesses() rewrites BPF_ST|BPF_MEM
to BPF_ST|BPF_PROBE_MEM32 for arena pointer stores during verification,
before bpf_jit_blind_constants() runs during JIT compilation. The
blinding switch only matches BPF_ST|BPF_MEM (mode 0x60), not
BPF_ST|BPF_PROBE_MEM32 (mode 0xa0). The instruction falls through
unblinded.
Add BPF_ST|BPF_PROBE_MEM32 cases to bpf_jit_blind_insn() alongside the
existing BPF_ST|BPF_MEM cases. The blinding transformation is identical:
load the blinded immediate into BPF_REG_AX via mov+xor, then convert
the immediate store to a register store (BPF_STX).
The rewritten STX instruction must preserve the BPF_PROBE_MEM32 mode so
the architecture JIT emits the correct arena addressing (R12-based on
x86-64). Cannot use the BPF_STX_MEM() macro here because it hardcodes
BPF_MEM mode; construct the instruction directly instead.
Fixes: 6082b6c328 ("bpf: Recognize addr_space_cast instruction in the verifier.")
Reviewed-by: Puranjay Mohan <puranjay@kernel.org>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Sachin Kumar <xcyfun@protonmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/Y6IT5VvNRchPBLI5D7JZHBzZrU9rb0ycRJPJzJSXGj7kJlX8RJwZFSM2YZjcDxoQKABkxt1T8Os2gi23PYyFuQe6KkZGWVyfz8K5afdy9ak=@protonmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds support to validate a pointer as not null when its
value is compared to a register whose value the verifier knows to be
null.
Initial pattern only verifies against an immediate operand.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Cc: David Faust <david.faust@oracle.com>
Cc: Jose Marchesi <jose.marchesi@oracle.com>
Cc: Elena Zannoni <elena.zannoni@oracle.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260304195018.181396-3-cupertino.miranda@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When a register undergoes a BPF_END (byte swap) operation, its scalar
value is mutated in-place. If this register previously shared a scalar ID
with another register (e.g., after an `r1 = r0` assignment), this tie must
be broken.
Currently, the verifier misses resetting `dst_reg->id` to 0 for BPF_END.
Consequently, if a conditional jump checks the swapped register, the
verifier incorrectly propagates the learned bounds to the linked register,
leading to false confidence in the linked register's value and potentially
allowing out-of-bounds memory accesses.
Fix this by explicitly resetting `dst_reg->id` to 0 in the BPF_END case
to break the scalar tie, similar to how BPF_NEG handles it via
`__mark_reg_known`.
Fixes: 9d21199842 ("bpf: Add bitwise tracking for BPF_END")
Closes: https://lore.kernel.org/bpf/AMBPR06MB108683CFEB1CB8D9E02FC95ECF17EA@AMBPR06MB10868.eurprd06.prod.outlook.com/
Link: https://lore.kernel.org/bpf/4be25f7442a52244d0dd1abb47bc6750e57984c9.camel@gmail.com/
Reported-by: Guillaume Laporte <glapt.pro@outlook.com>
Co-developed-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Tianci Cao <ziye@zju.edu.cn>
Co-developed-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Yazhou Tang <tangyazhou518@outlook.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260304083228.142016-2-tangyazhou@zju.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
fmod_ret BPF programs can only be attached to selected functions. For
convenience, the error injection list was originally used (along with
functions prefixed with "security_"), which contains syscalls and
several other functions.
When error injection is disabled (CONFIG_FUNCTION_ERROR_INJECTION=n),
that list is empty and fmod_ret programs are effectively unavailable for
most of the functions. In such a case, at least enable fmod_ret programs
on syscalls.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/472310f9a5f4944ad03214e4d943a4830fd8eb76.1773055375.git.vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Sleepable BPF programs can only be attached to selected functions. For
convenience, the error injection list was originally used, which
contains syscalls and several other functions.
When error injection is disabled (CONFIG_FUNCTION_ERROR_INJECTION=n),
that list is empty and sleepable tracing programs are effectively
unavailable. In such a case, at least enable sleepable programs on
syscalls. For discussion why syscalls were chosen, see [1].
To detect that a function is a syscall handler, we check for
arch-specific prefixes for the most common architectures. Unfortunately,
the prefixes are hard-coded in arch syscall code so we need to hard-code
them, too.
[1] https://lore.kernel.org/bpf/CAADnVQK6qP8izg+k9yV0vdcT-+=axtFQ2fKw7D-2Ei-V6WS5Dw@mail.gmail.com/
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/2704a8512746655037e3c02b471b31bd0d76c8db.1773055375.git.vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fix an inconsistency between func_states_equal() and
collect_linked_regs():
- regsafe() uses check_ids() to verify that cached and current states
have identical register id mapping.
- func_states_equal() calls regsafe() only for registers computed as
live by compute_live_registers().
- clean_live_states() is supposed to remove dead registers from cached
states, but it can skip states belonging to an iterator-based loop.
- collect_linked_regs() collects all registers sharing the same id,
ignoring the marks computed by compute_live_registers().
Linked registers are stored in the state's jump history.
- backtrack_insn() marks all linked registers for an instruction
as precise whenever one of the linked registers is precise.
The above might lead to a scenario:
- There is an instruction I with register rY known to be dead at I.
- Instruction I is reached via two paths: first A, then B.
- On path A:
- There is an id link between registers rX and rY.
- Checkpoint C is created at I.
- Linked register set {rX, rY} is saved to the jump history.
- rX is marked as precise at I, causing both rX and rY
to be marked precise at C.
- On path B:
- There is no id link between registers rX and rY,
otherwise register states are sub-states of those in C.
- Because rY is dead at I, check_ids() returns true.
- Current state is considered equal to checkpoint C,
propagate_precision() propagates spurious precision
mark for register rY along the path B.
- Depending on a program, this might hit verifier_bug()
in the backtrack_insn(), e.g. if rY ∈ [r1..r5]
and backtrack_insn() spots a function call.
The reproducer program is in the next patch.
This was hit by sched_ext scx_lavd scheduler code.
Changes in tests:
- verifier_scalar_ids.c selftests need modification to preserve
some registers as live for __msg() checks.
- exceptions_assert.c adjusted to match changes in the verifier log,
R0 is dead after conditional instruction and thus does not get
range.
- precise.c adjusted to match changes in the verifier log, register r9
is dead after comparison and it's range is not important for test.
Reported-by: Emil Tsalapatis <emil@etsalapatis.com>
Fixes: 0fb3cf6110 ("bpf: use register liveness information for func_states_equal")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260306-linked-regs-and-propagate-precision-v1-1-18e859be570d@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Same as in __reg64_deduce_bounds(), refine s32/u32 ranges
in __reg32_deduce_bounds() in the following situations:
- s32 range crosses U32_MAX/0 boundary, positive part of the s32 range
overlaps with u32 range:
0 U32_MAX
| [xxxxxxxxxxxxxx u32 range xxxxxxxxxxxxxx] |
|----------------------------|----------------------------|
|xxxxx s32 range xxxxxxxxx] [xxxxxxx|
0 S32_MAX S32_MIN -1
- s32 range crosses U32_MAX/0 boundary, negative part of the s32 range
overlaps with u32 range:
0 U32_MAX
| [xxxxxxxxxxxxxx u32 range xxxxxxxxxxxxxx] |
|----------------------------|----------------------------|
|xxxxxxxxx] [xxxxxxxxxxxx s32 range |
0 S32_MAX S32_MIN -1
- No refinement if ranges overlap in two intervals.
This helps for e.g. consider the following program:
call %[bpf_get_prandom_u32];
w0 &= 0xffffffff;
if w0 < 0x3 goto 1f; // on fall-through u32 range [3..U32_MAX]
if w0 s> 0x1 goto 1f; // on fall-through s32 range [S32_MIN..1]
if w0 s< 0x0 goto 1f; // range can be narrowed to [S32_MIN..-1]
r10 = 0;
1: ...;
The reg_bounds.c selftest is updated to incorporate identical logic,
refinement based on non-overflowing range halves:
((x ∩ [0, smax]) ∩ (y ∩ [0, smax])) ∪
((x ∩ [smin,-1]) ∩ (y ∩ [smin,-1]))
Reported-by: Andrea Righi <arighi@nvidia.com>
Reported-by: Emil Tsalapatis <emil@etsalapatis.com>
Closes: https://lore.kernel.org/bpf/aakqucg4vcujVwif@gpd4/T/
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260306-bpf-32-bit-range-overflow-v3-1-f7f67e060a6b@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
kthread_exit became a macro to do_exit in commit 28aaa9c399
("kthread: consolidate kthread exit paths to prevent use-after-free"),
so there is no kthread_exit function BTF ID to resolve. Remove it from
noreturn_deny to avoid resolve_btfids unresolved symbol warnings.
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The root cause of this bug is that when 'bpf_link_put' reduces the
refcount of 'shim_link->link.link' to zero, the resource is considered
released but may still be referenced via 'tr->progs_hlist' in
'cgroup_shim_find'. The actual cleanup of 'tr->progs_hlist' in
'bpf_shim_tramp_link_release' is deferred. During this window, another
process can cause a use-after-free via 'bpf_trampoline_link_cgroup_shim'.
Based on Martin KaFai Lau's suggestions, I have created a simple patch.
To fix this:
Add an atomic non-zero check in 'bpf_trampoline_link_cgroup_shim'.
Only increment the refcount if it is not already zero.
Testing:
I verified the fix by adding a delay in
'bpf_shim_tramp_link_release' to make the bug easier to trigger:
static void bpf_shim_tramp_link_release(struct bpf_link *link)
{
/* ... */
if (!shim_link->trampoline)
return;
+ msleep(100);
WARN_ON_ONCE(bpf_trampoline_unlink_prog(&shim_link->link,
shim_link->trampoline, NULL));
bpf_trampoline_put(shim_link->trampoline);
}
Before the patch, running a PoC easily reproduced the crash(almost 100%)
with a call trace similar to KaiyanM's report.
After the patch, the bug no longer occurs even after millions of
iterations.
Fixes: 69fd337a97 ("bpf: per-cgroup lsm flavor")
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Closes: https://lore.kernel.org/bpf/3c4ebb0b.46ff8.19abab8abe2.Coremail.kaiyanm@hust.edu.cn/
Signed-off-by: Lang Xu <xulang@uniontech.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/279EEE1BA1DDB49D+20260303095217.34436-1-xulang@uniontech.com
Global subprogs are currently not allowed to return void. Adjust
verifier logic to allow global functions with a void return type.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260228184759.108145-5-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
From: Eduard Zingerman <eddyz87@gmail.com>
Both main progs and subprogs use the same function in the verifier,
check_return_code, to verify the type and value range of the register
being returned. However, subprogs only need a subset of the logic in
check_return_code. this also goes the way - check_return_code explicitly
checks whether it is handling a subprogram in multiple places, complicating
the logic. Separate the handling of the two into separate functions.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260228184759.108145-4-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
From: Eduard Zingerman <eddyz87@gmail.com>
The check_return_code function has explicit checks on whether
a program type can return void. Factor this logic out to reuse
it later for both main progs and subprogs.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260228184759.108145-3-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Factor the return value range calculation logic in check_return_code
out of the function in preparation for separating the return value
validation logic for BPF_EXIT and bpf_throw().
No functional changes. The change made in return_retval_code's handling
of PROG_TRACING program types (not error'ing on the default case) is a
no-op because the match on the program attach type is exhaustive.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260228184759.108145-2-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The limitation on fixed offsets stems from the fact that certain program
types rewrite the accesses to the context structure and translate them
to accesses to the real underlying type. Technically, in the past, we
could have stashed the register offset in insn_aux and made rewrites
work, but we've never needed it in the past since the offset for such
context structures easily fit in the s16 signed instruction offset.
Regardless, the consequence is that for program types where the program
type's verifier ops doesn't supply a convert_ctx_access callback, we
unnecessarily reject accesses with a modified ctx pointer (i.e., one
whose offset has been shifted) in check_ptr_off_reg. Make an exception
for such program types (like syscall, tracepoint, raw_tp, etc.).
Pass in fixed_off_ok as true to __check_ptr_off_reg for such cases, and
accumulate the register offset into insn->off passed to check_ctx_access.
In particular, the accumulation is critical since we need to correctly
track the max_ctx_offset which is used for bounds checking the buffer
for syscall programs at runtime.
Reported-by: Tejun Heo <tj@kernel.org>
Reported-by: Dan Schatzberg <dschatzberg@meta.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260227005725.1247305-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
cpu_map_bpf_prog_run_xdp() handles XDP_PASS, XDP_REDIRECT, and
XDP_DROP but is missing an XDP_ABORTED case. Without it, XDP_ABORTED
falls into the default case which logs a misleading "invalid XDP
action" warning instead of tracing the abort via trace_xdp_exception().
Add the missing XDP_ABORTED case with trace_xdp_exception(), matching
the handling already present in the skb path (cpu_map_bpf_prog_run_skb),
devmap (dev_map_bpf_prog_run), and the generic XDP path (do_xdp_generic).
Also pass xdpf->dev_rx instead of NULL to bpf_warn_invalid_xdp_action()
in the default case, so the warning includes the actual device name.
This aligns with the generic XDP path in net/core/dev.c which already
passes the real device.
Signed-off-by: Anand Kumar Shaw <anandkrshawheritage@gmail.com>
Link: https://lore.kernel.org/r/20260218042924.42931-1-anandkrshawheritage@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Implementing BPF version of preempt_count() requires accessing lowcore
from BPF. Since lowcore can be relocated, open-coding
(struct lowcore *)0 does not work, so add a kfunc.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20260217160813.100855-2-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We're hitting an invariant violation in Cilium that sometimes leads to
BPF programs being rejected and Cilium failing to start [1]. The
following extract from verifier logs shows what's happening:
from 201 to 236: R1=0 R6=ctx() R7=1 R9=scalar(smin=umin=smin32=umin32=3584,smax=umax=smax32=umax32=3840,var_off=(0xe00; 0x100)) R10=fp0
236: R1=0 R6=ctx() R7=1 R9=scalar(smin=umin=smin32=umin32=3584,smax=umax=smax32=umax32=3840,var_off=(0xe00; 0x100)) R10=fp0
; if (magic == MARK_MAGIC_HOST || magic == MARK_MAGIC_OVERLAY || magic == MARK_MAGIC_ENCRYPT) @ bpf_host.c:1337
236: (16) if w9 == 0xe00 goto pc+45 ; R9=scalar(smin=umin=smin32=umin32=3585,smax=umax=smax32=umax32=3840,var_off=(0xe00; 0x100))
237: (16) if w9 == 0xf00 goto pc+1
verifier bug: REG INVARIANTS VIOLATION (false_reg1): range bounds violation u64=[0xe01, 0xe00] s64=[0xe01, 0xe00] u32=[0xe01, 0xe00] s32=[0xe01, 0xe00] var_off=(0xe00, 0x0)
We reach instruction 236 with two possible values for R9, 0xe00 and
0xf00. This is perfectly reflected in the tnum, but of course the ranges
are less accurate and cover [0xe00; 0xf00]. Taking the fallthrough path
at instruction 236 allows the verifier to reduce the range to
[0xe01; 0xf00]. The tnum is however not updated.
With these ranges, at instruction 237, the verifier is not able to
deduce that R9 is always equal to 0xf00. Hence the fallthrough pass is
explored first, the verifier refines the bounds using the assumption
that R9 != 0xf00, and ends up with an invariant violation.
This pattern of impossible branch + bounds refinement is common to all
invariant violations seen so far. The long-term solution is likely to
rely on the refinement + invariant violation check to detect dead
branches, as started by Eduard. To fix the current issue, we need
something with less refactoring that we can backport.
This patch uses the tnum_step helper introduced in the previous patch to
detect the above situation. In particular, three cases are now detected
in the bounds refinement:
1. The u64 range and the tnum only overlap in umin.
u64: ---[xxxxxx]-----
tnum: --xx----------x-
2. The u64 range and the tnum only overlap in the maximum value
represented by the tnum, called tmax.
u64: ---[xxxxxx]-----
tnum: xx-----x--------
3. The u64 range and the tnum only overlap in between umin (excluded)
and umax.
u64: ---[xxxxxx]-----
tnum: xx----x-------x-
To detect these three cases, we call tnum_step(tnum, umin), which
returns the smallest member of the tnum greater than umin, called
tnum_next here. We're in case (1) if umin is part of the tnum and
tnum_next is greater than umax. We're in case (2) if umin is not part of
the tnum and tnum_next is equal to tmax. Finally, we're in case (3) if
umin is not part of the tnum, tnum_next is inferior or equal to umax,
and calling tnum_step a second time gives us a value past umax.
This change implements these three cases. With it, the above bytecode
looks as follows:
0: (85) call bpf_get_prandom_u32#7 ; R0=scalar()
1: (47) r0 |= 3584 ; R0=scalar(smin=0x8000000000000e00,umin=umin32=3584,smin32=0x80000e00,var_off=(0xe00; 0xfffffffffffff1ff))
2: (57) r0 &= 3840 ; R0=scalar(smin=umin=smin32=umin32=3584,smax=umax=smax32=umax32=3840,var_off=(0xe00; 0x100))
3: (15) if r0 == 0xe00 goto pc+2 ; R0=3840
4: (15) if r0 == 0xf00 goto pc+1
4: R0=3840
6: (95) exit
In addition to the new selftests, this change was also verified with
Agni [3]. For the record, the raw SMT is available at [4]. The property
it verifies is that: If a concrete value x is contained in all input
abstract values, after __update_reg_bounds, it will continue to be
contained in all output abstract values.
Link: https://github.com/cilium/cilium/issues/44216 [1]
Link: https://pchaigno.github.io/test-verifier-complexity.html [2]
Link: https://github.com/bpfverif/agni [3]
Link: https://pastebin.com/raw/naCfaqNx [4]
Fixes: 0df1a55afa ("bpf: Warn on internal verifier errors")
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Tested-by: Marco Schirrmeister <mschirrmeister@gmail.com>
Co-developed-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Signed-off-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/ef254c4f68be19bd393d450188946821c588565d.1772225741.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit introduces tnum_step(), a function that, when given t, and a
number z returns the smallest member of t larger than z. The number z
must be greater or equal to the smallest member of t and less than the
largest member of t.
The first step is to compute j, a number that keeps all of t's known
bits, and matches all unknown bits to z's bits. Since j is a member of
the t, it is already a candidate for result. However, we want our result
to be (minimally) greater than z.
There are only two possible cases:
(1) Case j <= z. In this case, we want to increase the value of j and
make it > z.
(2) Case j > z. In this case, we want to decrease the value of j while
keeping it > z.
(Case 1) j <= z
t = xx11x0x0
z = 10111101 (189)
j = 10111000 (184)
^
k
(Case 1.1) Let's first consider the case where j < z. We will address j
== z later.
Since z > j, there had to be a bit position that was 1 in z and a 0 in
j, beyond which all positions of higher significance are equal in j and
z. Further, this position could not have been unknown in a, because the
unknown positions of a match z. This position had to be a 1 in z and
known 0 in t.
Let k be position of the most significant 1-to-0 flip. In our example, k
= 3 (starting the count at 1 at the least significant bit). Setting (to
1) the unknown bits of t in positions of significance smaller than
k will not produce a result > z. Hence, we must set/unset the unknown
bits at positions of significance higher than k. Specifically, we look
for the next larger combination of 1s and 0s to place in those
positions, relative to the combination that exists in z. We can achieve
this by concatenating bits at unknown positions of t into an integer,
adding 1, and writing the bits of that result back into the
corresponding bit positions previously extracted from z.
>From our example, considering only positions of significance greater
than k:
t = xx..x
z = 10..1
+ 1
-----
11..0
This is the exact combination 1s and 0s we need at the unknown bits of t
in positions of significance greater than k. Further, our result must
only increase the value minimally above z. Hence, unknown bits in
positions of significance smaller than k should remain 0. We finally
have,
result = 11110000 (240)
(Case 1.2) Now consider the case when j = z, for example
t = 1x1x0xxx
z = 10110100 (180)
j = 10110100 (180)
Matching the unknown bits of the t to the bits of z yielded exactly z.
To produce a number greater than z, we must set/unset the unknown bits
in t, and *all* the unknown bits of t candidates for being set/unset. We
can do this similar to Case 1.1, by adding 1 to the bits extracted from
the masked bit positions of z. Essentially, this case is equivalent to
Case 1.1, with k = 0.
t = 1x1x0xxx
z = .0.1.100
+ 1
---------
.0.1.101
This is the exact combination of bits needed in the unknown positions of
t. After recalling the known positions of t, we get
result = 10110101 (181)
(Case 2) j > z
t = x00010x1
z = 10000010 (130)
j = 10001011 (139)
^
k
Since j > z, there had to be a bit position which was 0 in z, and a 1 in
j, beyond which all positions of higher significance are equal in j and
z. This position had to be a 0 in z and known 1 in t. Let k be the
position of the most significant 0-to-1 flip. In our example, k = 4.
Because of the 0-to-1 flip at position k, a member of t can become
greater than z if the bits in positions greater than k are themselves >=
to z. To make that member *minimally* greater than z, the bits in
positions greater than k must be exactly = z. Hence, we simply match all
of t's unknown bits in positions more significant than k to z's bits. In
positions less significant than k, we set all t's unknown bits to 0
to retain minimality.
In our example, in positions of greater significance than k (=4),
t=x000. These positions are matched with z (1000) to produce 1000. In
positions of lower significance than k, t=10x1. All unknown bits are set
to 0 to produce 1001. The final result is:
result = 10001001 (137)
This concludes the computation for a result > z that is a member of t.
The procedure for tnum_step() in this commit implements the idea
described above. As a proof of correctness, we verified the algorithm
against a logical specification of tnum_step. The specification asserts
the following about the inputs t, z and output res that:
1. res is a member of t, and
2. res is strictly greater than z, and
3. there does not exist another value res2 such that
3a. res2 is also a member of t, and
3b. res2 is greater than z
3c. res2 is smaller than res
We checked the implementation against this logical specification using
an SMT solver. The verification formula in SMTLIB format is available
at [1]. The verification returned an "unsat": indicating that no input
assignment exists for which the implementation and the specification
produce different outputs.
In addition, we also automatically generated the logical encoding of the
C implementation using Agni [2] and verified it against the same
specification. This verification also returned an "unsat", confirming
that the implementation is equivalent to the specification. The formula
for this check is also available at [3].
Link: https://pastebin.com/raw/2eRWbiit [1]
Link: https://github.com/bpfverif/agni [2]
Link: https://pastebin.com/raw/EztVbBJ2 [3]
Co-developed-by: Srinivas Narayana <srinivas.narayana@rutgers.edu>
Signed-off-by: Srinivas Narayana <srinivas.narayana@rutgers.edu>
Co-developed-by: Santosh Nagarakatte <santosh.nagarakatte@rutgers.edu>
Signed-off-by: Santosh Nagarakatte <santosh.nagarakatte@rutgers.edu>
Signed-off-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Link: https://lore.kernel.org/r/93fdf71910411c0f19e282ba6d03b4c65f9c5d73.1772225741.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
On PREEMPT_RT kernels, the per-CPU xdp_dev_bulk_queue (bq) can be
accessed concurrently by multiple preemptible tasks on the same CPU.
The original code assumes bq_enqueue() and __dev_flush() run atomically
with respect to each other on the same CPU, relying on
local_bh_disable() to prevent preemption. However, on PREEMPT_RT,
local_bh_disable() only calls migrate_disable() (when
PREEMPT_RT_NEEDS_BH_LOCK is not set) and does not disable
preemption, which allows CFS scheduling to preempt a task during
bq_xmit_all(), enabling another task on the same CPU to enter
bq_enqueue() and operate on the same per-CPU bq concurrently.
This leads to several races:
1. Double-free / use-after-free on bq->q[]: bq_xmit_all() snapshots
cnt = bq->count, then iterates bq->q[0..cnt-1] to transmit frames.
If preempted after the snapshot, a second task can call bq_enqueue()
-> bq_xmit_all() on the same bq, transmitting (and freeing) the
same frames. When the first task resumes, it operates on stale
pointers in bq->q[], causing use-after-free.
2. bq->count and bq->q[] corruption: concurrent bq_enqueue() modifying
bq->count and bq->q[] while bq_xmit_all() is reading them.
3. dev_rx/xdp_prog teardown race: __dev_flush() clears bq->dev_rx and
bq->xdp_prog after bq_xmit_all(). If preempted between
bq_xmit_all() return and bq->dev_rx = NULL, a preempting
bq_enqueue() sees dev_rx still set (non-NULL), skips adding bq to
the flush_list, and enqueues a frame. When __dev_flush() resumes,
it clears dev_rx and removes bq from the flush_list, orphaning the
newly enqueued frame.
4. __list_del_clearprev() on flush_node: similar to the cpumap race,
both tasks can call __list_del_clearprev() on the same flush_node,
the second dereferences the prev pointer already set to NULL.
The race between task A (__dev_flush -> bq_xmit_all) and task B
(bq_enqueue -> bq_xmit_all) on the same CPU:
Task A (xdp_do_flush) Task B (ndo_xdp_xmit redirect)
---------------------- --------------------------------
__dev_flush(flush_list)
bq_xmit_all(bq)
cnt = bq->count /* e.g. 16 */
/* start iterating bq->q[] */
<-- CFS preempts Task A -->
bq_enqueue(dev, xdpf)
bq->count == DEV_MAP_BULK_SIZE
bq_xmit_all(bq, 0)
cnt = bq->count /* same 16! */
ndo_xdp_xmit(bq->q[])
/* frames freed by driver */
bq->count = 0
<-- Task A resumes -->
ndo_xdp_xmit(bq->q[])
/* use-after-free: frames already freed! */
Fix this by adding a local_lock_t to xdp_dev_bulk_queue and acquiring
it in bq_enqueue() and __dev_flush(). These paths already run under
local_bh_disable(), so use local_lock_nested_bh() which on non-RT is
a pure annotation with no overhead, and on PREEMPT_RT provides a
per-CPU sleeping lock that serializes access to the bq.
Fixes: 3253cb49cb ("softirq: Allow to drop the softirq-BKL lock on PREEMPT_RT")
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/r/20260225121459.183121-3-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
On PREEMPT_RT kernels, the per-CPU xdp_bulk_queue (bq) can be accessed
concurrently by multiple preemptible tasks on the same CPU.
The original code assumes bq_enqueue() and __cpu_map_flush() run
atomically with respect to each other on the same CPU, relying on
local_bh_disable() to prevent preemption. However, on PREEMPT_RT,
local_bh_disable() only calls migrate_disable() (when
PREEMPT_RT_NEEDS_BH_LOCK is not set) and does not disable
preemption, which allows CFS scheduling to preempt a task during
bq_flush_to_queue(), enabling another task on the same CPU to enter
bq_enqueue() and operate on the same per-CPU bq concurrently.
This leads to several races:
1. Double __list_del_clearprev(): after bq->count is reset in
bq_flush_to_queue(), a preempting task can call bq_enqueue() ->
bq_flush_to_queue() on the same bq when bq->count reaches
CPU_MAP_BULK_SIZE. Both tasks then call __list_del_clearprev()
on the same bq->flush_node, the second call dereferences the
prev pointer that was already set to NULL by the first.
2. bq->count and bq->q[] races: concurrent bq_enqueue() can corrupt
the packet queue while bq_flush_to_queue() is processing it.
The race between task A (__cpu_map_flush -> bq_flush_to_queue) and
task B (bq_enqueue -> bq_flush_to_queue) on the same CPU:
Task A (xdp_do_flush) Task B (cpu_map_enqueue)
---------------------- ------------------------
bq_flush_to_queue(bq)
spin_lock(&q->producer_lock)
/* flush bq->q[] to ptr_ring */
bq->count = 0
spin_unlock(&q->producer_lock)
bq_enqueue(rcpu, xdpf)
<-- CFS preempts Task A --> bq->q[bq->count++] = xdpf
/* ... more enqueues until full ... */
bq_flush_to_queue(bq)
spin_lock(&q->producer_lock)
/* flush to ptr_ring */
spin_unlock(&q->producer_lock)
__list_del_clearprev(flush_node)
/* sets flush_node.prev = NULL */
<-- Task A resumes -->
__list_del_clearprev(flush_node)
flush_node.prev->next = ...
/* prev is NULL -> kernel oops */
Fix this by adding a local_lock_t to xdp_bulk_queue and acquiring it
in bq_enqueue() and __cpu_map_flush(). These paths already run under
local_bh_disable(), so use local_lock_nested_bh() which on non-RT is
a pure annotation with no overhead, and on PREEMPT_RT provides a
per-CPU sleeping lock that serializes access to the bq.
To reproduce, insert an mdelay(100) between bq->count = 0 and
__list_del_clearprev() in bq_flush_to_queue(), then run reproducer
provided by syzkaller.
Fixes: 3253cb49cb ("softirq: Allow to drop the softirq-BKL lock on PREEMPT_RT")
Reported-by: syzbot+2b3391f44313b3983e91@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/69369331.a70a0220.38f243.009d.GAE@google.com/T/
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/r/20260225121459.183121-2-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This assumption will always hold going forward, hence just remove the
various checks and assume it is true with a comment for the uninformed
reader.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260227224806.646888-5-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, when use_kmalloc_nolock is false, the freeing of fields for a
local storage selem is done eagerly before waiting for the RCU or RCU
tasks trace grace period to elapse. This opens up a window where the
program which has access to the selem can recreate the fields after the
freeing of fields is done eagerly, causing memory leaks when the element
is finally freed and returned to the kernel.
Make a few changes to address this. First, delay the freeing of fields
until after the grace periods have expired using a __bpf_selem_free_rcu
wrapper which is eventually invoked after transitioning through the
necessary number of grace period waits. Replace usage of the kfree_rcu
with call_rcu to be able to take a custom callback. Finally, care needs
to be taken to extend the rcu barriers for all cases, and not just when
use_kmalloc_nolock is true, as RCU and RCU tasks trace callbacks can be
in flight for either case and access the smap field, which is used to
obtain the BTF record to walk over special fields in the map value.
While we're at it, drop migrate_disable() from bpf_selem_free_rcu, since
migration should be disabled for RCU callbacks already.
Fixes: 9bac675e63 ("bpf: Postpone bpf_obj_free_fields to the rcu callback")
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260227224806.646888-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF hash map may now use the map_check_btf() callback to decide whether
to set a dtor on its bpf_mem_alloc or not. Unlike C++ where members can
opt out of const-ness using mutable, we must lose the const qualifier on
the callback such that we can avoid the ugly cast. Make the change and
adjust all existing users, and lose the comment in hashtab.c.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260227224806.646888-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There is a race window where BPF hash map elements can leak special
fields if the program with access to the map value recreates these
special fields between the check_and_free_fields done on the map value
and its eventual return to the memory allocator.
Several ways were explored prior to this patch, most notably [0] tried
to use a poison value to reject attempts to recreate special fields for
map values that have been logically deleted but still accessible to BPF
programs (either while sitting in the free list or when reused). While
this approach works well for task work, timers, wq, etc., it is harder
to apply the idea to kptrs, which have a similar race and failure mode.
Instead, we change bpf_mem_alloc to allow registering destructor for
allocated elements, such that when they are returned to the allocator,
any special fields created while they were accessible to programs in the
mean time will be freed. If these values get reused, we do not free the
fields again before handing the element back. The special fields thus
may remain initialized while the map value sits in a free list.
When bpf_mem_alloc is retired in the future, a similar concept can be
introduced to kmalloc_nolock-backed kmem_cache, paired with the existing
idea of a constructor.
Note that the destructor registration happens in map_check_btf, after
the BTF record is populated and (at that point) avaiable for inspection
and duplication. Duplication is necessary since the freeing of embedded
bpf_mem_alloc can be decoupled from actual map lifetime due to logic
introduced to reduce the cost of rcu_barrier()s in mem alloc free path in
9f2c6e96c6 ("bpf: Optimize rcu_barrier usage between hash map and bpf_mem_alloc.").
As such, once all callbacks are done, we must also free the duplicated
record. To remove dependency on the bpf_map itself, also stash the key
size of the map to obtain value from htab_elem long after the map is
gone.
[0]: https://lore.kernel.org/bpf/20260216131341.1285427-1-mykyta.yatsenko5@gmail.com
Fixes: 14a324f6a6 ("bpf: Wire up freeing of referenced kptr")
Fixes: 1bfbc267ec ("bpf: Enable bpf_timer and bpf_wq in any context")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: syzbot@syzkaller.appspotmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260227224806.646888-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
get_upper_ifindexes() iterates over all upper devices and writes their
indices into an array without checking bounds.
Also the callers assume that the max number of upper devices is
MAX_NEST_DEV and allocate excluded_devices[1+MAX_NEST_DEV] on the stack,
but that assumption is not correct and the number of upper devices could
be larger than MAX_NEST_DEV (e.g., many macvlans), causing a
stack-out-of-bounds write.
Add a max parameter to get_upper_ifindexes() to avoid the issue.
When there are too many upper devices, return -EOVERFLOW and abort the
redirect.
To reproduce, create more than MAX_NEST_DEV(8) macvlans on a device with
an XDP program attached using BPF_F_BROADCAST | BPF_F_EXCLUDE_INGRESS.
Then send a packet to the device to trigger the XDP redirect path.
Reported-by: syzbot+10cc7f13760b31bd2e61@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/698c4ce3.050a0220.340abe.000b.GAE@google.com/T/
Fixes: aeea1b86f9 ("bpf, devmap: Exclude XDP broadcast to master device")
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Kohei Enju <kohei@enjuk.jp>
Link: https://lore.kernel.org/r/20260225053506.4738-1-kohei@enjuk.jp
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, tailcall count is incremented in the interpreter even when
tailcall fails due to non-existent prog. Fix this by holding off on
the tailcall count increment until after NULL check on the prog.
Suggested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Link: https://lore.kernel.org/r/20260220062959.195101-1-hbathini@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For the following scenario:
struct tree_node {
struct bpf_refcount ref;
struct bpf_rb_node node;
struct node_data __kptr * node_data;
u64 key;
};
This means node_data would have the type PTR_TO_BTF_ID | MEM_ALLOC |
NON_OWN_REF | MEM_RCU.
When traversing an rbtree using bpf_rbtree_left/right, if we need to
use bpf_kptr_xchg to read the __kptr pointer, we still need to follow
the remove-read-add sequence.
This patch allows us to use bpf_kptr_xchg to directly read the __kptr
pointer without any prior operations.
Signed-off-by: Kaitao Cheng <chengkaitao@kylinos.cn>
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Link: https://lore.kernel.org/r/20260214124042.62229-5-pilgrimtao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When traversing an rbtree using bpf_rbtree_left/right, if bpf_kptr_xchg
is used to access the __kptr pointer contained in a node, it currently
requires first removing the node with bpf_rbtree_remove and clearing the
NON_OWN_REF flag, then re-adding the node to the original rbtree with
bpf_rbtree_add after usage. This process significantly degrades rbtree
traversal performance. The patch enables accessing __kptr pointers with
the NON_OWN_REF flag set while holding the lock, eliminating the need
for this remove-read-add sequence.
Signed-off-by: Kaitao Cheng <chengkaitao@kylinos.cn>
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Link: https://lore.kernel.org/r/20260214124042.62229-3-pilgrimtao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For the following scenario:
struct tree_node {
struct bpf_rb_node node;
struct request __kptr *req;
u64 key;
};
struct bpf_rb_root tree_root __contains(tree_node, node);
struct bpf_spin_lock tree_lock;
If we need to traverse all nodes in the rbtree, retrieve the __kptr
pointer from each node, and read kernel data from the referenced
object, using bpf_kptr_xchg appears unavoidable.
This patch skips the BPF verifier checks for bpf_kptr_xchg when
called while holding a lock.
Signed-off-by: Kaitao Cheng <chengkaitao@kylinos.cn>
Link: https://lore.kernel.org/r/20260214124042.62229-2-pilgrimtao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
This field is now used only for linked scalar registers tracking.
Rename it to 'delta' to better describe it's purpose:
constant delta between "linked" scalars with the same ID.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260212-ptrs-off-migration-v2-4-00820e4d3438@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit consolidates static and varying pointer offset tracking
logic. All offsets are now represented solely using `.var_off` and
min/max fields. The reasons are twofold:
- This simplifies pointer tracking code, as each relevant function
needs to check the `.var_off` field anyway.
- It makes it easier to widen pointer registers for the purpose of loop
convergence checks, by forgoing the `regsafe()` logic demanding
`.off` fields to be identical.
The changes are spread across many functions and are hard to group
into smaller patches. Some of the logical changes include:
- Checks in __check_ptr_off_reg() are reordered so that the
tnum_is_const() check is done before operating on reg->var_off.value.
- check_packet_access() now uses check_mem_region_access() to handle
possible 'off' overflow cases.
- In check_helper_mem_access() utility functions like
check_packet_access() are now called with 'off=0', as these utility
functions now account for the complete register offset range.
- In check_reg_type() a call to __check_ptr_off_reg() is added before
a call to btf_struct_ids_match(). This prevents
btf_struct_ids_match() from potentially working on non-constant
reg->var_off.value.
- regsafe() is relaxed to avoid comparing '.off' field for pointers.
As a precaution, the changes are verified in [1] by adding a pass
checking that no pointer has non-zero '.off' field on each
do_check_insn() iteration.
[1] https://github.com/eddyz87/bpf/tree/ptrs-off-migration
Notable selftests changes:
- `.var_off` value changed because it now combines static and varying
offsets. Affected tests:
- linked_list/incorrect_node_var_off
- linked_list/incorrect_head_var_off2
- verifier_align/packet_variable_offset
- Overflowing `smax_value` bound leads to a pointer with big negative
or positive offset to be rejected immediately (previously overflowing
`rX += const` instruction updated `.off` field avoiding the overflow).
Affected tests:
- verifier_align/dubious_pointer_arithmetic
- verifier_bounds/var_off_insn_off_test1
- Invalid access to packet now reports full offset inside a packet.
Affected tests:
- verifier_direct_packet_access/test23_x_pkt_ptr_4
- A change in check_mem_region_access() behavior:
when register `.smin_value` is negative, it reports
"rX min value is negative..." before calling into __check_mem_access()
which reports "invalid access to ...".
In the tests below, the `.off` field was negative, while `.smin_value`
remained positive. This is no longer the case after the changes in
this commit. Affected tests:
- verifier_gotox/jump_table_invalid_mem_acceess_neg
- verifier_helper_packet_access/test15_cls_helper_fail_sub
- verifier_helper_value_access/imm_out_of_bound_2
- verifier_helper_value_access/reg_out_of_bound_2
- verifier_meta_access/meta_access_test2
- verifier_value_ptr_arith/known_scalar_from_different_maps
- lower_oob_arith_test_1
- value_ptr_known_scalar_3
- access_value_ptr_known_scalar
- Usage of check_mem_region_access() instead of __check_mem_access()
in check_packet_access() changes the reported message from
"rX offset is outside ..." to "rX min/max value is outside ...".
Affected tests:
- verifier_xdp_direct_packet_access/*
- In check_func_arg_reg_off() the check for zero offset now operates
on `.var_off` field instead of `.off` field. For tests where the
pattern looks like `kfunc(reg_with_var_off, ...)`, this changes the
reported error:
- previously the error "variable ... access ... disallowed"
was reported by __check_ptr_off_reg();
- now "R1 must have zero offset ..." is reported by
check_func_arg_reg_off() itself.
Affected tests:
- verifier/calls.c
"calls: invalid kfunc call: PTR_TO_BTF_ID with variable offset"
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260212-ptrs-off-migration-v2-2-00820e4d3438@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
check_reg_sane_offset() is used when verifying operations like:
dst_reg += src_reg
^ ^
| '-------- scalar
'------------------- pointer
To verify range for both dst_reg and src_reg. Split it in two parts:
- one to check a pointer offset
- another to check scalar offset
This would be useful for further refactoring.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260212-ptrs-off-migration-v2-1-00820e4d3438@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The add_fd_from_fd_array() function takes a file descriptor as a
parameter and tries to add either map or btf to the corresponding
list of used objects. As was reported by Dan Carpenter, since the
commit c81e4322acf0 ("bpf: Fix a potential use-after-free of BTF
object"), the fdget() is called twice on the file descriptor, and
thus userspace, potentially, can replace the file pointed to by the
file descriptor in between the two calls. On practice, this shouldn't
break anything on the kernel side, but for consistency fix the code
such that only one fdget() is executed.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/aY689z7gHNv8rgVO@stanley.mountain/
Fixes: ccd2d799ed ("bpf: Fix a potential use-after-free of BTF object")
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20260213212949.759321-1-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Total patches: 107
Reviews/patch: 1.07
Reviewed rate: 67%
- The 2 patch series "ocfs2: give ocfs2 the ability to reclaim
suballocator free bg" from Heming Zhao saves disk space by teaching
ocfs2 to reclaim suballocator block group space.
- The 4 patch series "Add ARRAY_END(), and use it to fix off-by-one
bugs" from Alejandro Colomar adds the ARRAY_END() macro and uses it in
various places.
- The 2 patch series "vmcoreinfo: support VMCOREINFO_BYTES larger than
PAGE_SIZE" from Pnina Feder makes the vmcore code future-safe, if
VMCOREINFO_BYTES ever exceeds the page size.
- The 7 patch series "kallsyms: Prevent invalid access when showing
module buildid" from Petr Mladek cleans up kallsyms code related to
module buildid and fixes an invalid access crash when printing
backtraces.
- The 3 patch series "Address page fault in
ima_restore_measurement_list()" from Harshit Mogalapalli fixes a
kexec-related crash that can occur when booting the second-stage kernel
on x86.
- The 6 patch series "kho: ABI headers and Documentation updates" from
Mike Rapoport updates the kexec handover ABI documentation.
- The 4 patch series "Align atomic storage" from Finn Thain adds the
__aligned attribute to atomic_t and atomic64_t definitions to get
natural alignment of both types on csky, m68k, microblaze, nios2,
openrisc and sh.
- The 2 patch series "kho: clean up page initialization logic" from
Pratyush Yadav simplifies the page initialization logic in
kho_restore_page().
- The 6 patch series "Unload linux/kernel.h" from Yury Norov moves
several things out of kernel.h and into more appropriate places.
- The 7 patch series "don't abuse task_struct.group_leader" from Oleg
Nesterov removes the usage of ->group_leader when it is "obviously
unnecessary".
- The 5 patch series "list private v2 & luo flb" from Pasha Tatashin
adds some infrastructure improvements to the live update orchestrator.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaY4giAAKCRDdBJ7gKXxA
jgusAQDnKkP8UWTqXPC1jI+OrDJGU5ciAx8lzLeBVqMKzoYk9AD/TlhT2Nlx+Ef6
0HCUHUD0FMvAw/7/Dfc6ZKxwBEIxyww=
=mmsH
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
Take care of rqspinlock error in bpf_local_storage_{map_free, destroy}()
properly by switching to bpf_selem_unlink_nofail().
Both functions iterate their own RCU-protected list of selems and call
bpf_selem_unlink_nofail(). In map_free(), to prevent infinite loop when
both map_free() and destroy() fail to remove a selem from b->list
(extremely unlikely), switch to hlist_for_each_entry_rcu(). In destroy(),
also switch to hlist_for_each_entry_rcu() since we no longer iterate
local_storage->list under local_storage->lock.
bpf_selem_unlink() now becomes dedicated to helpers and syscalls paths
so reuse_now should always be false. Remove it from the argument and
hardcode it.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Co-developed-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260205222916.1788211-12-ameryhung@gmail.com
Introduce bpf_selem_unlink_nofail() to properly handle errors returned
from rqspinlock in bpf_local_storage_map_free() and
bpf_local_storage_destroy() where the operation must succeeds.
The idea of bpf_selem_unlink_nofail() is to allow an selem to be
partially linked and use atomic operation on a bit field, selem->state,
to determine when and who can free the selem if any unlink under lock
fails. An selem initially is fully linked to a map and a local storage.
Under normal circumstances, bpf_selem_unlink_nofail() will be able to
grab locks and unlink a selem from map and local storage in sequeunce,
just like bpf_selem_unlink(), and then free it after an RCU grace period.
However, if any of the lock attempts fails, it will only clear
SDATA(selem)->smap or selem->local_storage depending on the caller and
set SELEM_MAP_UNLINKED or SELEM_STORAGE_UNLINKED according to the
caller. Then, after both map_free() and destroy() see the selem and the
state becomes SELEM_UNLINKED, one of two racing caller can succeed in
cmpxchg the state from SELEM_UNLINKED to SELEM_TOFREE, ensuring no
double free or memory leak.
To make sure bpf_obj_free_fields() is done only once and when map is
still present, it is called when unlinking an selem from b->list under
b->lock.
To make sure uncharging memory is done only when the owner is still
present in map_free(), block destroy() from returning until there is no
pending map_free().
Since smap may not be valid in destroy(), bpf_selem_unlink_nofail()
skips bpf_selem_unlink_storage_nolock_misc() when called from destroy().
This is okay as bpf_local_storage_destroy() will return the remaining
amount of memory charge tracked by mem_charge to the owner to uncharge.
It is also safe to skip clearing local_storage->owner and owner_storage
as the owner is being freed and no users or bpf programs should be able
to reference the owner and using local_storage.
Finally, access of selem, SDATA(selem)->smap and selem->local_storage
are racy. Callers will protect these fields with RCU.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Co-developed-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260205222916.1788211-11-ameryhung@gmail.com
The next patch will introduce bpf_selem_unlink_nofail() to handle
rqspinlock errors. bpf_selem_unlink_nofail() will allow an selem to be
partially unlinked from map or local storage. Save memory allocation
method in selem so that later an selem can be correctly freed even when
SDATA(selem)->smap is init to NULL.
In addition, keep track of memory charge to the owner in local storage
so that later bpf_selem_unlink_nofail() can return the correct memory
charge to the owner. Updating local_storage->mem_charge is protected by
local_storage->lock.
Finally, extract miscellaneous tasks performed when unlinking an selem
from local_storage into bpf_selem_unlink_storage_nolock_misc(). It will
be reused by bpf_selem_unlink_nofail().
This patch also takes the chance to remove local_storage->smap, which
is no longer used since commit f484f4a3e0 ("bpf: Replace bpf memory
allocator with kmalloc_nolock() in local storage").
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260205222916.1788211-10-ameryhung@gmail.com
Percpu locks have been removed from cgroup and task local storage. Now
that all local storage no longer use percpu variables as locks preventing
recursion, there is no need to pass them to bpf_local_storage_map_free().
Remove the argument from the function.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260205222916.1788211-9-ameryhung@gmail.com
The percpu counter in cgroup local storage is no longer needed as the
underlying bpf_local_storage can now handle deadlock with the help of
rqspinlock. Remove the percpu counter and related migrate_{disable,
enable}.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260205222916.1788211-8-ameryhung@gmail.com
The percpu counter in task local storage is no longer needed as the
underlying bpf_local_storage can now handle deadlock with the help of
rqspinlock. Remove the percpu counter and related migrate_{disable,
enable}.
Since the percpu counter is removed, merge back bpf_task_storage_get()
and bpf_task_storage_get_recur(). This will allow the bpf syscalls and
helpers to run concurrently on the same CPU, removing the spurious
-EBUSY error. bpf_task_storage_get(..., F_CREATE) will now always
succeed with enough free memory unless being called recursively.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260205222916.1788211-7-ameryhung@gmail.com
Change bpf_local_storage::lock and bpf_local_storage_map_bucket::lock
from raw_spin_lock to rqspinlock.
Finally, propagate errors from raw_res_spin_lock_irqsave() to syscall
return or BPF helper return.
In bpf_local_storage_destroy(), ignore return from
raw_res_spin_lock_irqsave() for now. A later patch will correctly
handle errors correctly in bpf_local_storage_destroy() so that it can
unlink selems even when failing to acquire locks.
For __bpf_local_storage_map_cache(), instead of handling the error,
skip updating the cache.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260205222916.1788211-6-ameryhung@gmail.com
To prepare changing both bpf_local_storage_map_bucket::lock and
bpf_local_storage::lock to rqspinlock, convert bpf_selem_unlink() to
failable. It still always succeeds and returns 0 until the change
happens. No functional change.
Open code bpf_selem_unlink_storage() in the only caller,
bpf_selem_unlink(), since unlink_map and unlink_storage must be done
together after all the necessary locks are acquired.
For bpf_local_storage_map_free(), ignore the return from
bpf_selem_unlink() for now. A later patch will allow it to unlink selems
even when failing to acquire locks.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260205222916.1788211-5-ameryhung@gmail.com
To prepare for changing bpf_local_storage_map_bucket::lock to rqspinlock,
convert bpf_selem_link_map() to failable. It still always succeeds and
returns 0 until the change happens. No functional change.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260205222916.1788211-4-ameryhung@gmail.com
To prepare for changing bpf_local_storage_map_bucket::lock to rqspinlock,
convert bpf_selem_unlink_map() to failable. It still always succeeds and
returns 0 for now.
Since some operations updating local storage cannot fail in the middle,
open-code bpf_selem_unlink_map() to take the b->lock before the
operation. There are two such locations:
- bpf_local_storage_alloc()
The first selem will be unlinked from smap if cmpxchg owner_storage_ptr
fails, which should not fail. Therefore, hold b->lock when linking
until allocation complete. Helpers that assume b->lock is held by
callers are introduced: bpf_selem_link_map_nolock() and
bpf_selem_unlink_map_nolock().
- bpf_local_storage_update()
The three step update process: link_map(new_selem),
link_storage(new_selem), and unlink_map(old_selem) should not fail in
the middle.
In bpf_selem_unlink(), bpf_selem_unlink_map() and
bpf_selem_unlink_storage() should either all succeed or fail as a whole
instead of failing in the middle. So, return if unlink_map() failed.
Remove the selem_linked_to_map_lockless() check as an selem in the
common paths (not bpf_local_storage_map_free() or
bpf_local_storage_destroy()), will be unlinked under b->lock and
local_storage->lock and therefore no other threads can unlink the selem
from map at the same time.
In bpf_local_storage_destroy(), ignore the return of
bpf_selem_unlink_map() for now. A later patch will allow
bpf_local_storage_destroy() to unlink selems even when failing to
acquire locks.
Note that while this patch removes all callers of selem_linked_to_map(),
a later patch that introduces bpf_selem_unlink_nofail() will use it
again.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260205222916.1788211-3-ameryhung@gmail.com
A later bpf_local_storage refactor will acquire all locks before
performing any update. To simplified the number of locks needed to take
in bpf_local_storage_map_update(), determine the bucket based on the
local_storage an selem belongs to instead of the selem pointer.
Currently, when a new selem needs to be created to replace the old selem
in bpf_local_storage_map_update(), locks of both buckets need to be
acquired to prevent racing. This can be simplified if the two selem
belongs to the same bucket so that only one bucket needs to be locked.
Therefore, instead of hashing selem, hashing the local_storage pointer
the selem belongs.
Performance wise, this is slightly better as update now requires locking
one bucket. It should not change the level of contention on one bucket
as the pointers to local storages of selems in a map are just as unique
as pointers to selems.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260205222916.1788211-2-ameryhung@gmail.com
call_rcu_tasks_trace() is not safe from in_nmi() and not reentrant.
To prevent deadlock on raw_spin_lock_rcu_node(rtpcp) or memory corruption
defer to irq_work when IRQs are disabled. call_rcu_tasks_generic()
protects itself with local_irq_save().
Note when bpf_async_cb->refcnt drops to zero it's safe to reuse
bpf_async_cb->worker for a different irq_work callback, since
bpf_async_schedule_op() -> irq_work_queue(&cb->worker);
is only called when refcnt >= 1.
Fixes: 1bfbc267ec ("bpf: Enable bpf_timer and bpf_wq in any context")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260205190233.912-1-alexei.starovoitov@gmail.com
Currently, bpf_map_get_info_by_fd calculates and caches the hash of the
map regardless of the map's frozen state.
This leads to a TOCTOU bug where userspace can call
BPF_OBJ_GET_INFO_BY_FD to cache the hash and then modify the map
contents before freezing.
Therefore, a trusted loader can be tricked into verifying the stale hash
while loading the modified contents.
Fix this by returning -EPERM if the map is not frozen when the hash is
requested. This ensures the hash is only generated for the final,
immutable state of the map.
Fixes: ea2e6467ac ("bpf: Return hashes of maps in BPF_OBJ_GET_INFO_BY_FD")
Reported-by: Toshi Piazza <toshi.piazza@microsoft.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260205070755.695776-1-kpsingh@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Practical BPF signatures are significantly smaller than
KMALLOC_MAX_CACHE_SIZE
Allowing larger sizes opens the door for abuse by passing excessive
size values and forcing the kernel into expensive allocation paths (via
kmalloc_large or vmalloc).
Fixes: 3492715683 ("bpf: Implement signature verification for BPF programs")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260205063807.690823-1-kpsingh@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Replace prog and callback in bpf_async_cb after removing visibility of
bpf_async_cb in bpf_async_cancel_and_free() to increase the chances the
scheduled async callbacks short-circuit execution and exit early, and
not starting a RCU tasks trace section. This improves the overall time
spent in running the wq selftest.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260205003853.527571-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When freeing a bpf_async_cb in bpf_async_cb_rcu_tasks_trace_free(), in
case the wq callback is not scheduled, doing cancel_work() currently
returns false and leads to retry of RCU tasks trace grace period. If the
callback is never scheduled, we keep retrying indefinitely and don't put
the prog reference.
Since the only race we care about here is against a potentially running
wq callback in the first grace period, it should finish by the second
grace period, hence check work_busy() result to detect presence of
running wq callback if it's not pending, otherwise free the object
immediately without retrying.
Reasoning behind the check and its correctness with racing wq callback
invocation: cancel_work is supposed to be synchronized, hence calling it
first and getting false would mean that work is definitely not pending,
at this point, either the work is not scheduled at all or already
running, or we race and it already finished by the time we checked for
it using work_busy(). In case it is running, we synchronize using
pool->lock to check the current work running there, if we match, it
means we extend the wait by another grace period using retry = true,
otherwise either the work already finished running or was never
scheduled, so we can free the bpf_async_cb right away.
Fixes: 1bfbc267ec ("bpf: Enable bpf_timer and bpf_wq in any context")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260205003853.527571-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Previously, the verifier only tracked positive constant deltas between
linked registers using BPF_ADD. This limitation meant patterns like:
r1 = r0;
r1 += -4;
if r1 s>= 0 goto l0_%=; // r1 >= 0 implies r0 >= 4
// verifier couldn't propagate bounds back to r0
if r0 != 0 goto l0_%=;
r0 /= 0; // Verifier thinks this is reachable
l0_%=:
Similar limitation exists for 32-bit registers.
With this change, the verifier can now track negative deltas in reg->off
enabling bound propagation for the above pattern.
For alu32, we make sure the destination register has the upper 32 bits
as 0s before creating the link. BPF_ADD_CONST is split into
BPF_ADD_CONST64 and BPF_ADD_CONST32, the latter is used in case of alu32
and sync_linked_regs uses this to zext the result if known_reg has this
flag.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260204151741.2678118-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch implements bitwise tracking (tnum analysis) for BPF_END
(byte swap) operation.
Currently, the BPF verifier does not track value for BPF_END operation,
treating the result as completely unknown. This limits the verifier's
ability to prove safety of programs that perform endianness conversions,
which are common in networking code.
For example, the following code pattern for port number validation:
int test(struct pt_regs *ctx) {
__u64 x = bpf_get_prandom_u32();
x &= 0x3f00; // Range: [0, 0x3f00], var_off: (0x0; 0x3f00)
x = bswap16(x); // Should swap to range [0, 0x3f], var_off: (0x0; 0x3f)
if (x > 0x3f) goto trap;
return 0;
trap:
return *(u64 *)NULL; // Should be unreachable
}
Currently generates verifier output:
1: (54) w0 &= 16128 ; R0=scalar(smin=smin32=0,smax=umax=smax32=umax32=16128,var_off=(0x0; 0x3f00))
2: (d7) r0 = bswap16 r0 ; R0=scalar()
3: (25) if r0 > 0x3f goto pc+2 ; R0=scalar(smin=smin32=0,smax=umax=smax32=umax32=63,var_off=(0x0; 0x3f))
Without this patch, even though the verifier knows `x` has certain bits
set, after bswap16, it loses all tracking information and treats port
as having a completely unknown value [0, 65535].
According to the BPF instruction set[1], there are 3 kinds of BPF_END:
1. `bswap(16|32|64)`: opcode=0xd7 (BPF_END | BPF_ALU64 | BPF_TO_LE)
- do unconditional swap
2. `le(16|32|64)`: opcode=0xd4 (BPF_END | BPF_ALU | BPF_TO_LE)
- on big-endian: do swap
- on little-endian: truncation (16/32-bit) or no-op (64-bit)
3. `be(16|32|64)`: opcode=0xdc (BPF_END | BPF_ALU | BPF_TO_BE)
- on little-endian: do swap
- on big-endian: truncation (16/32-bit) or no-op (64-bit)
Since BPF_END operations are inherently bit-wise permutations, tnum
(bitwise tracking) offers the most efficient and precise mechanism
for value analysis. By implementing `tnum_bswap16`, `tnum_bswap32`,
and `tnum_bswap64`, we can derive exact `var_off` values concisely,
directly reflecting the bit-level changes.
Here is the overview of changes:
1. In `tnum_bswap(16|32|64)` (kernel/bpf/tnum.c):
Call `swab(16|32|64)` function on the value and mask of `var_off`, and
do truncation for 16/32-bit cases.
2. In `adjust_scalar_min_max_vals` (kernel/bpf/verifier.c):
Call helper function `scalar_byte_swap`.
- Only do byte swap when
* alu64 (unconditional swap) OR
* switching between big-endian and little-endian machines.
- If need do byte swap:
* Firstly call `tnum_bswap(16|32|64)` to update `var_off`.
* Then reset the bound since byte swap scrambles the range.
- For 16/32-bit cases, truncate dst register to match the swapped size.
This enables better verification of networking code that frequently uses
byte swaps for protocol processing, reducing false positive rejections.
[1] https://www.kernel.org/doc/Documentation/bpf/standardization/instruction-set.rst
Co-developed-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Co-developed-by: Yazhou Tang <tangyazhou518@outlook.com>
Signed-off-by: Yazhou Tang <tangyazhou518@outlook.com>
Signed-off-by: Tianci Cao <ziye@zju.edu.cn>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260204111503.77871-2-ziye@zju.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Do not schedule timer/wq operation on a cpu that is in irq_work
callback that is processing async_cmds queue.
Otherwise the following loop is possible:
bpf_timer_start() -> bpf_async_schedule_op() -> irq_work_queue().
irqrestore -> bpf_async_irq_worker() -> tracepoint -> bpf_timer_start().
Fixes: 1bfbc267ec ("bpf: Enable bpf_timer and bpf_wq in any context")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260204055147.54960-4-alexei.starovoitov@gmail.com
Though hrtimer_start/cancel() inlines all of the smaller helpers in
hrtimer.c and only call timerqueue_add/del() from lib/timerqueue.c where
everything is not traceable and not kprobe-able (because all files in
lib/ are not traceable), there are tracepoints within hrtimer that are
called with locks held. Therefore prevent the deadlock by tightening
conditions when timer/wq can be called synchronously.
hrtimer/wq are using raw_spin_lock_irqsave(), so irqs_disabled() is enough.
Fixes: 1bfbc267ec ("bpf: Enable bpf_timer and bpf_wq in any context")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260204055147.54960-2-alexei.starovoitov@gmail.com
sk->sk_family should be read with READ_ONCE() in
__cgroup_bpf_run_filter_sock_addr() due to IPV6_ADDRFORM.
Also, the comment there is a bit stale since commit 859051dd16
("bpf: Implement cgroup sockaddr hooks for unix sockets"), and the
kdoc has the same comment.
Let's use sk_is_inet() and sk_is_unix() and remove the comment.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260203213442.682838-2-kuniyu@google.com
Extend the verifier to recognize struct bpf_timer as a valid kfunc
argument type. Previously, bpf_timer was only supported in BPF helpers.
This prepares for adding timer-related kfuncs in subsequent patches.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260201025403.66625-3-alexei.starovoitov@gmail.com
Refactor bpf_timer and bpf_wq to allow calling them from any context:
- add refcnt to bpf_async_cb
- map_delete_elem or map_free will drop refcnt to zero
via bpf_async_cancel_and_free()
- once refcnt is zero timer/wq_start is not allowed to make sure
that callback cannot rearm itself
- if in_hardirq defer to start/cancel operations to irq_work
Co-developed-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20260201025403.66625-2-alexei.starovoitov@gmail.com
The BPF stream kfuncs bpf_stream_vprintk and bpf_stream_print_stack
do not sleep and so are safe to call while holding a lock. Amend
the verifier to allow that.
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260203180424.14057-4-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a new kfunc called bpf_stream_print_stack to be used by programs
that need to print out their current BPF stack. The kfunc is essentially
a wrapper around the existing bpf_stream_dump_stack functionality used
to generate stack traces for error events like may_goto violations and
BPF-side arena page faults.
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260203180424.14057-2-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Scalar register IDs are used by the verifier to track relationships
between registers and enable bounds propagation across those
relationships. Once an ID becomes singular (i.e. only a single
register/stack slot carries it), it can no longer contribute to bounds
propagation and effectively becomes stale. The previous commit makes the
verifier clear such ids before caching the state.
When comparing the current and cached states for pruning, these stale
IDs can cause technically equivalent states to be considered different
and thus prevent pruning.
For example, in the selftest added in the next commit, two registers -
r6 and r7 are not linked to any other registers and get cached with
id=0, in the current state, they are both linked to each other with
id=A. Before this commit, check_scalar_ids would give temporary ids to
r6 and r7 (say tid1 and tid2) and then check_ids() would map tid1->A,
and when it would see tid2->A, it would not consider these state
equivalent.
Relax scalar ID equivalence by treating rold->id == 0 as "independent":
if the old state did not rely on any ID relationships for a register,
then any ID/linking present in the current state only adds constraints
and is always safe to accept for pruning. Implement this by returning
true immediately in check_scalar_ids() when old_id == 0.
Maintain correctness for the opposite direction (old_id != 0 && cur_id
== 0) by still allocating a temporary ID for cur_id == 0. This avoids
incorrectly allowing multiple independent current registers (id==0) to
satisfy a single linked old ID during mapping.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260203165102.2302462-5-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The maybe_widen_reg() function widens imprecise scalar registers to
unknown when their values differ between the cached and current states.
Previously, it used regs_exact() which also compared register IDs via
check_ids(), requiring registers to have matching IDs (or mapped IDs) to
be considered exact.
For scalar widening purposes, what matters is whether the value tracking
(bounds, tnum, var_off) is the same, not whether the IDs match. Two
scalars with identical value constraints but different IDs represent the
same abstract value and don't need to be widened.
Introduce scalars_exact_for_widen() that only compares the
value-tracking portion of bpf_reg_state (fields before 'id'). This
allows the verifier to preserve more scalar value information during
state merging when IDs differ but actual tracked values are identical,
reducing unnecessary widening and potentially improving verification
precision.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260203165102.2302462-4-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The verifier assigns ids to scalar registers/stack slots when they are
linked through a mov or stack spill/fill instruction. These ids are
later used to propagate newly found bounds from one register to all
registers that share the same id. The verifier also compares the ids of
these registers in current state and cached state when making pruning
decisions.
When an ID becomes singular (i.e., only a single register or stack slot
has that ID), it can no longer participate in bounds propagation. During
comparisons between current and cached states for pruning decisions,
however, such stale IDs can prevent pruning of otherwise equivalent
states.
Find and clear all singular ids before caching a state in
is_state_visited(). struct bpf_idset which is currently unused has been
repurposed for this use case.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260203165102.2302462-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The next commit will allow clearing of scalar ids if no other
register/stack slot has that id. This is because if only one register
has a unique id, it can't participate in bounds propagation and is
equivalent to having no id.
But if the id of a stack slot is cleared by clear_singular_ids() in the
next commit, reading that stack slot into a register will not establish
a link because the stack slot's id is cleared.
This can happen in a situation where a register is spilled and later
loses its id due to a multiply operation (for example) and then the
stack slot's id becomes singular and can be cleared.
Make sure that scalar stack slots have an id before we read them into a
register.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260203165102.2302462-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The added fsession does not prevent running on those architectures, that
haven't added fsession support.
For example, try to run fsession tests on arm64:
test_fsession_basic:PASS:fsession_test__open_and_load 0 nsec
test_fsession_basic:PASS:fsession_attach 0 nsec
check_result:FAIL:test_run_opts err unexpected error: -14 (errno 14)
In order to prevent such errors, add bpf_jit_supports_fsession() to guard
those architectures.
Fixes: 2d419c4465 ("bpf: add fsession support")
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Tested-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260131144950.16294-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Consolidate all logic for verifying special map fields in the single
function check_map_field_pointer().
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260130-verif_special_fields-v2-2-2c59e637da7d@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce struct bpf_map_desc to hold bpf_map pointer and map uid. Use
this struct in both bpf_call_arg_meta and bpf_kfunc_call_arg_meta
instead of having different representations:
- bpf_call_arg_meta had separate map_ptr and map_uid fields
- bpf_kfunc_call_arg_meta had an anonymous inline struct
This unifies the map fields layout across both metadata structures,
making the code more consistent and preparing for further refactoring of
map field pointer validation.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260130-verif_special_fields-v2-1-2c59e637da7d@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allowing sleepable programs to use tail calls.
Making sure we can't mix sleepable and non-sleepable bpf programs
in tail call map (BPF_MAP_TYPE_PROG_ARRAY) and allowing it to be
used in sleepable programs.
Sleepable programs can be preempted and sleep which might bring
new source of race conditions, but both direct and indirect tail
calls should not be affected.
Direct tail calls work by patching direct jump to callee into bpf
caller program, so no problem there. We atomically switch from nop
to jump instruction.
Indirect tail call reads the callee from the map and then jumps to
it. The callee bpf program can't disappear (be released) from the
caller, because it is executed under rcu lock (rcu_read_lock_trace).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260130081208.1130204-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The BPF verifier assumes `insn_aux->nospec_result` is only set for
direct memory writes (e.g., `*(u32*)(r1+off) = r2`). However, the
assertion fails to account for helper calls (e.g.,
`bpf_skb_load_bytes_relative`) that perform writes to stack memory. Make
the check more precise to resolve this.
The problem is that `BPF_CALL` instructions have `BPF_CLASS(insn->code)
== BPF_JMP`, which triggers the warning check:
- Helpers like `bpf_skb_load_bytes_relative` write to stack memory
- `check_helper_call()` loops through `meta.access_size`, calling
`check_mem_access(..., BPF_WRITE)`
- `check_stack_write()` sets `insn_aux->nospec_result = 1`
- Since `BPF_CALL` is encoded as `BPF_JMP | BPF_CALL`, the warning fires
Execution flow:
```
1. Drop capabilities → Enable Spectre mitigation
2. Load BPF program
└─> do_check()
├─> check_cond_jmp_op() → Marks dead branch as speculative
│ └─> push_stack(..., speculative=true)
├─> pop_stack() → state->speculative = 1
├─> check_helper_call() → Processes helper in dead branch
│ └─> check_mem_access(..., BPF_WRITE)
│ └─> insn_aux->nospec_result = 1
└─> Checks: state->speculative && insn_aux->nospec_result
└─> BPF_CLASS(insn->code) == BPF_JMP → WARNING
```
To fix the assert, it would be nice to be able to reuse
bpf_insn_successors() here, but bpf_insn_successors()->cnt is not
exactly what we want as it may also be 1 for BPF_JA. Instead, we could
check opcode_info.can_jump, but then we would have to share the table
between the functions. This would mean moving the table out of the
function and adding bpf_opcode_info(). As the verifier_bug_if() only
runs for insns with nospec_result set, the impact on verification time
would likely still be negligible. However, I assume sharing
bpf_opcode_info() between liveness.c and verifier.c will not be worth
it. It seems as only adjust_jmp_off() could also be simplified using it,
and there imm/off is touched. Thus it is maybe better to rely on exact
opcode/class matching there.
Therefore, to avoid this sharing only for a verifier_bug_if(), just
check the opcode. This should now cover all opcodes for which can_jump
in bpf_insn_successors() is true.
Parts of the description and example are taken from the bug report.
Fixes: dadb59104c ("bpf: Fix aux usage after do_check_insn()")
Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de>
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Reported-by: Dongliang Mu <dzm91@hust.edu.cn>
Closes: https://lore.kernel.org/bpf/7678017d-b760-4053-a2d8-a6879b0dbeeb@hust.edu.cn/
Link: https://lore.kernel.org/r/20260127115912.3026761-2-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Using single ftrace_ops for direct calls update instead of allocating
ftrace_ops object for each trampoline.
With single ftrace_ops object we can use update_ftrace_direct_* api
that allows multiple ip sites updates on single ftrace_ops object.
Adding HAVE_SINGLE_FTRACE_DIRECT_OPS config option to be enabled on
each arch that supports this.
At the moment we can enable this only on x86 arch, because arm relies
on ftrace_ops object representing just single trampoline image (stored
in ftrace_ops::direct_call). Archs that do not support this will continue
to use *_ftrace_direct api.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-10-jolsa@kernel.org
We are going to remove "ftrace_ops->private == bpf_trampoline" setup
in following changes.
Adding ip argument to ftrace_ops_func_t callback function, so we can
use it to look up the trampoline.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-9-jolsa@kernel.org
At the moment the we allow the jmp attach only for ftrace_ops that
has FTRACE_OPS_FL_JMP set. This conflicts with following changes
where we use single ftrace_ops object for all direct call sites,
so all could be be attached via just call or jmp.
We already limit the jmp attach support with config option and bit
(LSB) set on the trampoline address. It turns out that's actually
enough to limit the jmp attach for architecture and only for chosen
addresses (with LSB bit set).
Each user of register_ftrace_direct or modify_ftrace_direct can set
the trampoline bit (LSB) to indicate it has to be attached by jmp.
The bpf trampoline generation code uses trampoline flags to generate
jmp-attach specific code and ftrace inner code uses the trampoline
bit (LSB) to handle return from jmp attachment, so there's no harm
to remove the FTRACE_OPS_FL_JMP bit.
The fexit/fmodret performance stays the same (did not drop),
current code:
fentry : 77.904 ± 0.546M/s
fexit : 62.430 ± 0.554M/s
fmodret : 66.503 ± 0.902M/s
with this change:
fentry : 80.472 ± 0.061M/s
fexit : 63.995 ± 0.127M/s
fmodret : 67.362 ± 0.175M/s
Fixes: 25e4e3565d ("ftrace: Introduce FTRACE_OPS_FL_JMP")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-2-jolsa@kernel.org
This commit fixes a security issue where BPF_PROG_DETACH on tcx or
netkit devices could be executed by any user when no program fd was
provided, bypassing permission checks. The fix adds a capability
check for CAP_NET_ADMIN or CAP_SYS_ADMIN in this case.
Fixes: e420bed025 ("bpf: Add fd-based tcx multi-prog infra with link support")
Signed-off-by: Guillaume Gonnet <ggonnet.linux@gmail.com>
Link: https://lore.kernel.org/r/20260127160200.10395-1-ggonnet.linux@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, the BPF cgroup iterator supports walking descendants in
either pre-order (BPF_CGROUP_ITER_DESCENDANTS_PRE) or post-order
(BPF_CGROUP_ITER_DESCENDANTS_POST). These modes perform an exhaustive
depth-first search (DFS) of the hierarchy. In scenarios where a BPF
program may need to inspect only the direct children of a given parent
cgroup, a full DFS is unnecessarily expensive.
This patch introduces a new BPF cgroup iterator control option,
BPF_CGROUP_ITER_CHILDREN. This control option restricts the traversal
to the immediate children of a specified parent cgroup, allowing for
more targeted and efficient iteration, particularly when exhaustive
depth-first search (DFS) traversal is not required.
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Link: https://lore.kernel.org/r/20260127085112.3608687-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Patch series "Align atomic storage", v7.
This series adds the __aligned attribute to atomic_t and atomic64_t
definitions in include/linux and include/asm-generic (respectively) to get
natural alignment of both types on csky, m68k, microblaze, nios2, openrisc
and sh.
This series also adds Kconfig options to enable a new run-time warning to
help reveal misaligned atomic accesses on platforms which don't trap that.
The performance impact is expected to vary across platforms and workloads.
The measurements I made on m68k show that some workloads run faster and
others slower.
This patch (of 4):
Align bpf_res_spin_lock to avoid a BUILD_BUG_ON() when the alignment
changes, as it will do on m68k when, in a subsequent patch, the minimum
alignment of the atomic_t member of struct rqspinlock gets increased from
2 to 4. Drop the BUILD_BUG_ON() as it becomes redundant.
Link: https://lkml.kernel.org/r/cover.1768281748.git.fthain@linux-m68k.org
Link: https://lkml.kernel.org/r/8a83876b07d1feacc024521e44059ae89abbb1ea.1768281748.git.fthain@linux-m68k.org
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Daniel Borkman <daniel@iogearbox.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Guo Ren <guoren@kernel.org>
Cc: Hao Luo <haoluo@google.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Sasha Levin (Microsoft) <sashal@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stanislav Fomichev <sdf@fomichev.me>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement session cookie for fsession. The session cookies will be stored
in the stack, and the layout of the stack will look like this:
return value -> 8 bytes
argN -> 8 bytes
...
arg1 -> 8 bytes
nr_args -> 8 bytes
ip (optional) -> 8 bytes
cookie2 -> 8 bytes
cookie1 -> 8 bytes
The offset of the cookie for the current bpf program, which is in 8-byte
units, is stored in the
"(((u64 *)ctx)[-1] >> BPF_TRAMP_COOKIE_INDEX_SHIFT) & 0xFF". Therefore, we
can get the session cookie with ((u64 *)ctx)[-offset].
Implement and inline the bpf_session_cookie() for the fsession in the
verifier.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20260124062008.8657-6-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If fsession exists, we will use the bit (1 << BPF_TRAMP_IS_RETURN_SHIFT)
in ((u64 *)ctx)[-1] to store the "is_return" flag.
The logic of bpf_session_is_return() for fsession is implemented in the
verifier by inline following code:
bool bpf_session_is_return(void *ctx)
{
return (((u64 *)ctx)[-1] >> BPF_TRAMP_IS_RETURN_SHIFT) & 1;
}
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Co-developed-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260124062008.8657-5-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add the function argument of "void *ctx" to bpf_session_cookie() and
bpf_session_is_return(), which is a preparation of the next patch.
The two kfunc is seldom used now, so it will not introduce much effect
to change their function prototype.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20260124062008.8657-4-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For now, ((u64 *)ctx)[-1] is used to store the nr_args in the trampoline.
However, 1 byte is enough to store such information. Therefore, we use
only the least significant byte of ((u64 *)ctx)[-1] to store the nr_args,
and reserve the rest for other usages.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20260124062008.8657-3-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The fsession is something that similar to kprobe session. It allow to
attach a single BPF program to both the entry and the exit of the target
functions.
Introduce the struct bpf_fsession_link, which allows to add the link to
both the fentry and fexit progs_hlist of the trampoline.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Co-developed-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260124062008.8657-2-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The TAS fallback can be invoked directly when queued spin locks are
disabled, and through the slow path when paravirt is enabled for queued
spin locks. In the latter case, the res_spin_lock macro will attempt the
fast path and already hold the entry when entering the slow path. This
will lead to creation of extraneous entries that are not released, which
may cause false positives for deadlock detection.
Fix this by always preceding invocation of the TAS fallback in every
case with the grabbing of the held lock entry, and add a comment to make
note of this.
Fixes: c9102a68c0 ("rqspinlock: Add a test-and-set fallback")
Reported-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Tested-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/r/20260122115911.3668985-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_strncasecmp() function performs same like bpf_strcasecmp() except
limiting the comparison to a specific length.
Signed-off-by: Yuzuki Ishiyama <ishiyama@hpc.is.uec.ac.jp>
Acked-by: Viktor Malik <vmalik@redhat.com>
Acked-by: Mykyta Yatsenko <mykyta.yatsenko5@gmail.com>
Link: https://lore.kernel.org/r/20260121033328.1850010-2-ishiyama@hpc.is.uec.ac.jp
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For now, bpf_get_func_arg() and bpf_get_func_arg_cnt() is not supported by
the BPF_TRACE_RAW_TP, which is not convenient to get the argument of the
tracepoint, especially for the case that the position of the arguments in
a tracepoint can change.
The target tracepoint BTF type id is specified during loading time,
therefore we can get the function argument count from the function
prototype instead of the stack.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20260121044348.113201-2-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_address_lookup() has been used only in kallsyms_lookup_buildid(). It
was supposed to set @modname and @modbuildid when the symbol was in a
module.
But it always just cleared @modname because BPF symbols were never in a
module. And it did not clear @modbuildid because the pointer was not
passed.
The wrapper is no longer needed. Both @modname and @modbuildid are now
always initialized to NULL in kallsyms_lookup_buildid().
Remove the wrapper and rename __bpf_address_lookup() to
bpf_address_lookup() because this variant is used everywhere.
[akpm@linux-foundation.org: fix loongarch]
Link: https://lkml.kernel.org/r/20251128135920.217303-6-pmladek@suse.com
Fixes: 9294523e37 ("module: add printk formats to add module build ID to stacktraces")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Daniel Borkman <daniel@iogearbox.net>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove <linux/hex.h> from <linux/kernel.h> and update all users/callers of
hex.h interfaces to directly #include <linux/hex.h> as part of the process
of putting kernel.h on a diet.
Removing hex.h from kernel.h means that 36K C source files don't have to
pay the price of parsing hex.h for the roughly 120 C source files that
need it.
This change has been build-tested with allmodconfig on most ARCHes. Also,
all users/callers of <linux/hex.h> in the entire source tree have been
updated if needed (if not already #included).
Link: https://lkml.kernel.org/r/20251215005206.2362276-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove lock from the bpf_timer_cancel() helper. The lock does not
protect from concurrent modification of the bpf_async_cb data fields as
those are modified in the callback without locking.
Use guard(rcu)() instead of pair of explicit lock()/unlock().
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260120-timer_nolock-v6-4-670ffdd787b4@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce bpf_async_update_prog_callback(): lock-free update of cb->prog
and cb->callback_fn. This function allows updating prog and callback_fn
fields of the struct bpf_async_cb without holding lock.
For now use it under the lock from __bpf_async_set_callback(), in the
next patches that lock will be removed.
Lock-free algorithm:
* Acquire a guard reference on prog to prevent it from being freed
during the retry loop.
* Retry loop:
1. Each iteration acquires a new prog reference and stores it
in cb->prog via xchg. The previous prog is released.
2. The loop condition checks if both cb->prog and cb->callback_fn
match what we just wrote. If either differs, a concurrent writer
overwrote our value, and we must retry.
3. When we retry, our previously-stored prog was already released by
the concurrent writer or will be released by us after
overwriting.
* Release guard reference.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260120-timer_nolock-v6-3-670ffdd787b4@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move the timer deletion logic into a dedicated bpf_timer_delete()
helper so it can be reused by later patches.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260120-timer_nolock-v6-1-670ffdd787b4@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add check to ensure that ARG_PTR_TO_MEM is used with either MEM_WRITE or
MEM_RDONLY.
Using ARG_PTR_TO_MEM alone without flags does not make sense because:
- If the helper does not change the argument, missing MEM_RDONLY causes the
verifier to incorrectly reject a read-only buffer.
- If the helper does change the argument, missing MEM_WRITE causes the
verifier to incorrectly assume the memory is unchanged, leading to errors
in code optimization.
Co-developed-by: Shuran Liu <electronlsr@gmail.com>
Signed-off-by: Shuran Liu <electronlsr@gmail.com>
Co-developed-by: Peili Gao <gplhust955@gmail.com>
Signed-off-by: Peili Gao <gplhust955@gmail.com>
Co-developed-by: Haoran Ni <haoran.ni.cs@gmail.com>
Signed-off-by: Haoran Ni <haoran.ni.cs@gmail.com>
Signed-off-by: Zesen Liu <ftyghome@gmail.com>
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260120-helper_proto-v3-2-27b0180b4e77@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
After commit 37cce22dbd ("bpf: verifier: Refactor helper access type tracking"),
the verifier started relying on the access type flags in helper
function prototypes to perform memory access optimizations.
Currently, several helper functions utilizing ARG_PTR_TO_MEM lack the
corresponding MEM_RDONLY or MEM_WRITE flags. This omission causes the
verifier to incorrectly assume that the buffer contents are unchanged
across the helper call. Consequently, the verifier may optimize away
subsequent reads based on this wrong assumption, leading to correctness
issues.
For bpf_get_stack_proto_raw_tp, the original MEM_RDONLY was incorrect
since the helper writes to the buffer. Change it to ARG_PTR_TO_UNINIT_MEM
which correctly indicates write access to potentially uninitialized memory.
Similar issues were recently addressed for specific helpers in commit
ac44dcc788 ("bpf: Fix verifier assumptions of bpf_d_path's output buffer")
and commit 2eb7648558 ("bpf: Specify access type of bpf_sysctl_get_name args").
Fix these prototypes by adding the correct memory access flags.
Fixes: 37cce22dbd ("bpf: verifier: Refactor helper access type tracking")
Co-developed-by: Shuran Liu <electronlsr@gmail.com>
Signed-off-by: Shuran Liu <electronlsr@gmail.com>
Co-developed-by: Peili Gao <gplhust955@gmail.com>
Signed-off-by: Peili Gao <gplhust955@gmail.com>
Co-developed-by: Haoran Ni <haoran.ni.cs@gmail.com>
Signed-off-by: Haoran Ni <haoran.ni.cs@gmail.com>
Signed-off-by: Zesen Liu <ftyghome@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260120-helper_proto-v3-1-27b0180b4e77@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch implements range tracking (interval analysis) for BPF_DIV and
BPF_MOD operations when the divisor is a constant, covering both signed
and unsigned variants.
While LLVM typically optimizes integer division and modulo by constants
into multiplication and shift sequences, this optimization is less
effective for the BPF target when dealing with 64-bit arithmetic.
Currently, the verifier does not track bounds for scalar division or
modulo, treating the result as "unbounded". This leads to false positive
rejections for safe code patterns.
For example, the following code (compiled with -O2):
```c
int test(struct pt_regs *ctx) {
char buffer[6] = {1};
__u64 x = bpf_ktime_get_ns();
__u64 res = x % sizeof(buffer);
char value = buffer[res];
bpf_printk("res = %llu, val = %d", res, value);
return 0;
}
```
Generates a raw `BPF_MOD64` instruction:
```asm
; __u64 res = x % sizeof(buffer);
1: 97 00 00 00 06 00 00 00 r0 %= 0x6
; char value = buffer[res];
2: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0x0 ll
4: 0f 01 00 00 00 00 00 00 r1 += r0
5: 91 14 00 00 00 00 00 00 r4 = *(s8 *)(r1 + 0x0)
```
Without this patch, the verifier fails with "math between map_value
pointer and register with unbounded min value is not allowed" because
it cannot deduce that `r0` is within [0, 5].
According to the BPF instruction set[1], the instruction's offset field
(`insn->off`) is used to distinguish between signed (`off == 1`) and
unsigned division (`off == 0`). Moreover, we also follow the BPF division
and modulo runtime behavior (semantics) to handle special cases, such as
division by zero and signed division overflow.
- UDIV: dst = (src != 0) ? (dst / src) : 0
- SDIV: dst = (src == 0) ? 0 : ((src == -1 && dst == LLONG_MIN) ? LLONG_MIN : (dst / src))
- UMOD: dst = (src != 0) ? (dst % src) : dst
- SMOD: dst = (src == 0) ? dst : ((src == -1 && dst == LLONG_MIN) ? 0: (dst s% src))
Here is the overview of the changes made in this patch (See the code comments
for more details and examples):
1. For BPF_DIV: Firstly check whether the divisor is zero. If so, set the
destination register to zero (matching runtime behavior).
For non-zero constant divisors: goto `scalar(32)?_min_max_(u|s)div` functions.
- General cases: compute the new range by dividing max_dividend and
min_dividend by the constant divisor.
- Overflow case (SIGNED_MIN / -1) in signed division: mark the result
as unbounded if the dividend is not a single number.
2. For BPF_MOD: Firstly check whether the divisor is zero. If so, leave the
destination register unchanged (matching runtime behavior).
For non-zero constant divisors: goto `scalar(32)?_min_max_(u|s)mod` functions.
- General case: For signed modulo, the result's sign matches the
dividend's sign. And the result's absolute value is strictly bounded
by `min(abs(dividend), abs(divisor) - 1)`.
- Special care is taken when the divisor is SIGNED_MIN. By casting
to unsigned before negation and subtracting 1, we avoid signed
overflow and correctly calculate the maximum possible magnitude
(`res_max_abs` in the code).
- "Small dividend" case: If the dividend is already within the possible
result range (e.g., [-2, 5] % 10), the operation is an identity
function, and the destination register remains unchanged.
3. In `scalar(32)?_min_max_(u|s)(div|mod)` functions: After updating current
range, reset other ranges and tnum to unbounded/unknown.
e.g., in `scalar_min_max_sdiv`, signed 64-bit range is updated. Then reset
unsigned 64-bit range and 32-bit range to unbounded, and tnum to unknown.
Exception: in BPF_MOD's "small dividend" case, since the result remains
unchanged, we do not reset other ranges/tnum.
4. Also updated existing selftests based on the expected BPF_DIV and
BPF_MOD behavior.
[1] https://www.kernel.org/doc/Documentation/bpf/standardization/instruction-set.rst
Co-developed-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Co-developed-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Yazhou Tang <tangyazhou518@outlook.com>
Tested-by: syzbot@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20260119085458.182221-2-tangyazhou@zju.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Implement bpf_stream_vprintk with an implicit bpf_prog_aux argument,
and remote bpf_stream_vprintk_impl from the kernel.
Update the selftests to use the new API with implicit argument.
bpf_stream_vprintk macro is changed to use the new bpf_stream_vprintk
kfunc, and the extern definition of bpf_stream_vprintk_impl is
replaced accordingly.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260120222638.3976562-11-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Implement bpf_task_work_schedule_* with an implicit bpf_prog_aux
argument, and remove corresponding _impl funcs from the kernel.
Update special kfunc checks in the verifier accordingly.
Update the selftests to use the new API with implicit argument.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260120222638.3976562-10-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Implement bpf_wq_set_callback() with an implicit bpf_prog_aux
argument, and remove bpf_wq_set_callback_impl().
Update special kfunc checks in the verifier accordingly.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260120222638.3976562-8-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A kernel function bpf_foo marked with KF_IMPLICIT_ARGS flag is
expected to have two associated types in BTF:
* `bpf_foo` with a function prototype that omits implicit arguments
* `bpf_foo_impl` with a function prototype that matches the kernel
declaration of `bpf_foo`, but doesn't have a ksym associated with
its name
In order to support kfuncs with implicit arguments, the verifier has
to know how to resolve a call of `bpf_foo` to the correct BTF function
prototype and address.
To implement this, in add_kfunc_call() kfunc flags are checked for
KF_IMPLICIT_ARGS. For such kfuncs a BTF func prototype is adjusted to
the one found for `bpf_foo_impl` (func_name + "_impl" suffix, by
convention) function in BTF.
This effectively changes the signature of the `bpf_foo` kfunc in the
context of verification: from one without implicit args to the one
with full argument list.
The values of implicit arguments by design are provided by the
verifier, and so they can only be of particular types. In this patch
the only allowed implicit arg type is a pointer to struct
bpf_prog_aux.
In order for the verifier to correctly set an implicit bpf_prog_aux
arg value at runtime, is_kfunc_arg_prog() is extended to check for the
arg type. At a point when prog arg is determined in check_kfunc_args()
the kfunc with implicit args already has a prototype with full
argument list, so the existing value patch mechanism just works.
If a new kfunc with KF_IMPLICIT_ARG is declared for an existing kfunc
that uses a __prog argument (a legacy case), the prototype
substitution works in exactly the same way, assuming the kfunc follows
the _impl naming convention. The difference is only in how _impl
prototype is added to the BTF, which is not the verifier's
concern. See a subsequent resolve_btfids patch for details.
__prog suffix is still supported at this point, but will be removed in
a subsequent patch, after current users are moved to KF_IMPLICIT_ARGS.
Introduction of KF_IMPLICIT_ARGS revealed an issue with zero-extension
tracking, because an explicit rX = 0 in place of the verifier-supplied
argument is now absent if the arg is implicit (the BPF prog doesn't
pass a dummy NULL anymore). To mitigate this, reset the subreg_def of
all caller saved registers in check_kfunc_call() [1].
[1] https://lore.kernel.org/bpf/b4a760ef828d40dac7ea6074d39452bb0dc82caa.camel@gmail.com/
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260120222638.3976562-4-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There is code duplication between add_kfunc_call() and
fetch_kfunc_meta() collecting information about a kfunc from BTF.
Introduce struct bpf_kfunc_meta to hold common kfunc BTF data and
implement fetch_kfunc_meta() to fill it in, instead of struct
bpf_kfunc_call_arg_meta directly.
Then use these in add_kfunc_call() and (new) fetch_kfunc_arg_meta()
functions, and fixup previous usages of fetch_kfunc_meta() to
fetch_kfunc_arg_meta().
Besides the code dedup, this change enables add_kfunc_call() to access
kfunc->flags.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260120222638.3976562-3-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
btf_kfunc_id_set_contains() is called by fetch_kfunc_meta() in the BPF
verifier to get the kfunc flags stored in the .BTF_ids ELF section.
If it returns NULL instead of a valid pointer, it's interpreted as an
illegal kfunc usage failing the verification.
There are two potential reasons for btf_kfunc_id_set_contains() to
return NULL:
1. Provided kfunc BTF id is not present in relevant kfunc id sets.
2. The kfunc is not allowed, as determined by the program type
specific filter [1].
The filter functions accept a pointer to `struct bpf_prog`, so they
might implicitly depend on earlier stages of verification, when
bpf_prog members are set.
For example, bpf_qdisc_kfunc_filter() in linux/net/sched/bpf_qdisc.c
inspects prog->aux->st_ops [2], which is initialized in:
check_attach_btf_id() -> check_struct_ops_btf_id()
So far this hasn't been an issue, because fetch_kfunc_meta() is the
only caller of btf_kfunc_id_set_contains().
However in subsequent patches of this series it is necessary to
inspect kfunc flags earlier in BPF verifier, in the add_kfunc_call().
To resolve this, refactor btf_kfunc_id_set_contains() into two
interface functions:
* btf_kfunc_flags() that simply returns pointer to kfunc_flags
without applying the filters
* btf_kfunc_is_allowed() that both checks for kfunc_flags existence
(which is a requirement for a kfunc to be allowed) and applies the
prog filters
See [3] for the previous version of this patch.
[1] https://lore.kernel.org/all/20230519225157.760788-7-aditi.ghag@isovalent.com/
[2] https://lore.kernel.org/all/20250409214606.2000194-4-ameryhung@gmail.com/
[3] https://lore.kernel.org/bpf/20251029190113.3323406-3-ihor.solodrai@linux.dev/
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260120222638.3976562-2-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, reset_idmap_scratch() performs a 4.7KB memset() in every
states_equal() call. Optimize this by using a counter to track used
ID mappings, replacing the O(N) memset() with an O(1) reset and
bounding the search loop in check_ids().
Signed-off-by: Qiliang Yuan <realwujing@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20260120023234.77673-1-realwujing@gmail.com
After commit 4fa8d68aa5 ("bpf: Convert hashtab.c to rqspinlock")
we no longer use HASHTAB_MAP_LOCK_{COUNT,MASK} as the per-CPU
map_locked[HASHTAB_MAP_LOCK_COUNT] array got removed from struct
bpf_htab. Right now it is still accounted for in htab_map_mem_usage.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/09703eb6bb249f12b1d5253b5a50a0c4fa239d27.1768913513.git.daniel@iogearbox.net
sync_linked_regs() is called after a conditional jump to propagate new
bounds of a register to all its liked registers. But the verifier log
only prints the state of the register that is part of the conditional
jump.
Make sync_linked_regs() scratch the registers whose bounds have been
updated by propagation from a known register.
Before:
0: (85) call bpf_get_prandom_u32#7 ; R0=scalar()
1: (57) r0 &= 255 ; R0=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
2: (bf) r1 = r0 ; R0=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) R1=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
3: (07) r1 += 4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=4,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
4: (a5) if r1 < 0xa goto pc+2 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=10,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
5: (35) if r0 >= 0x6 goto pc+1
After:
0: (85) call bpf_get_prandom_u32#7 ; R0=scalar()
1: (57) r0 &= 255 ; R0=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
2: (bf) r1 = r0 ; R0=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) R1=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
3: (07) r1 += 4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=4,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
4: (a5) if r1 < 0xa goto pc+2 ; R0=scalar(id=1+0,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=255) R1=scalar(id=1+4,smin=umin=smin32=umin32=10,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
5: (35) if r0 >= 0x6 goto pc+1
The conditional jump in 4 updates the bound of R1 and the new bounds are
propogated to R0 as it is linked with the same id, before this change,
verifier only printed the state for R1 but after it prints for both R0
and R1.
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20260116141436.3715322-1-puranjay@kernel.org
Add GPL-2.0 SPDX-License-Identifier lines to some files,
and remove a reference to COPYING, and boilerplate warranty
text, from offload.c.
Signed-off-by: Tim Bird <tim.bird@sony.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260115013129.598705-1-tim.bird@sony.com
sync_linked_regs() copies the id of known_reg to reg when propagating
bounds of known_reg to reg using the off of known_reg, but when
known_reg was linked to reg like:
known_reg = reg ; both known_reg and reg get same id
known_reg += 4 ; known_reg gets off = 4, and its id gets BPF_ADD_CONST
now when a call to sync_linked_regs() happens, let's say with the following:
if known_reg >= 10 goto pc+2
known_reg's new bounds are propagated to reg but now reg gets
BPF_ADD_CONST from the copy.
This means if another link to reg is created like:
another_reg = reg ; another_reg should get the id of reg but
assign_scalar_id_before_mov() sees
BPF_ADD_CONST on reg and assigns a new id to it.
As reg has a new id now, known_reg's link to reg is broken. If we find
new bounds for known_reg, they will not be propagated to reg.
This can be seen in the selftest added in the next commit:
0: (85) call bpf_get_prandom_u32#7 ; R0=scalar()
1: (57) r0 &= 255 ; R0=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
2: (bf) r1 = r0 ; R0=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) R1=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
3: (07) r1 += 4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=4,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
4: (a5) if r1 < 0xa goto pc+4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=10,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
5: (bf) r2 = r0 ; R0=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=255) R2=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=255)
6: (a5) if r1 < 0xe goto pc+2 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=14,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
7: (35) if r0 >= 0xa goto pc+1 ; R0=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=9,var_off=(0x0; 0xf))
8: (37) r0 /= 0
div by zero
When 4 is verified, r1's bounds are propagated to r0 but r0 also gets
BPF_ADD_CONST (bug).
When 5 is verified, r0 gets a new id (2) and its link with r1 is broken.
After 6 we know r1 has bounds [14, 259] and therefore r0 should have
bounds [10, 255], therefore the branch at 7 is always taken. But because
r0's id was changed to 2, r1's new bounds are not propagated to r0.
The verifier still thinks r0 has bounds [6, 255] before 7 and execution
can reach div by zero.
Fix this by preserving id in sync_linked_regs() like off and subreg_def.
Fixes: 98d7ca374b ("bpf: Track delta between "linked" registers.")
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260115151143.1344724-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For a `gotox rX` instruction the rX register should be marked as used
in the compute_insn_live_regs() function. Fix this.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20260114162544.83253-2-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cross-merge BPF and other fixes after downstream PR.
No conflicts.
Adjacent:
Auto-merging MAINTAINERS
Auto-merging Makefile
Auto-merging kernel/bpf/verifier.c
Auto-merging kernel/sched/ext.c
Auto-merging mm/memcontrol.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The insn_array_map_direct_value_addr() function currently returns
-EINVAL when the offset within the map is invalid. Change this to
return -EACCES, so that it is consistent with similar boundary access
checks in the verifier.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260111153047.8388-3-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The map_direct_value_addr() function of the instruction
array map incorrectly adds offset to the resulting address.
This is a bug, because later the resolve_pseudo_ldimm64()
function adds the offset. Fix it. Corresponding selftests
are added in a consequent commit.
Fixes: 493d9e0d60 ("bpf, x86: add support for indirect jumps")
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260111153047.8388-2-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Teach the BPF verifier to treat pointers to struct types returned from
BPF kfuncs as implicitly trusted (PTR_TO_BTF_ID | PTR_TRUSTED) by
default. Returning untrusted pointers to struct types from BPF kfuncs
should be considered an exception only, and certainly not the norm.
Update existing selftests to reflect the change in register type
printing (e.g. `ptr_` becoming `trusted_ptr_` in verifier error
messages).
Link: https://lore.kernel.org/bpf/aV4nbCaMfIoM0awM@google.com/
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260113083949.2502978-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, vmlinux BTF is unconditionally sorted during
the build phase. The function btf_find_by_name_kind
executes the binary search branch, so find_bpffs_btf_enums
can be optimized by using btf_find_by_name_kind.
Signed-off-by: Donglin Peng <pengdonglin@xiaomi.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20260109130003.3313716-10-dolinux.peng@gmail.com
Currently, vmlinux and kernel module BTFs are unconditionally
sorted during the build phase, with named types placed at the
end. Thus, anonymous types should be skipped when starting the
search. In my vmlinux BTF, the number of anonymous types is
61,747, which means the loop count can be reduced by 61,747.
Signed-off-by: Donglin Peng <pengdonglin@xiaomi.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20260109130003.3313716-9-dolinux.peng@gmail.com
This patch checks whether the BTF is sorted by name in ascending order.
If sorted, binary search will be used when looking up types.
Specifically, vmlinux and kernel module BTFs are always sorted during
the build phase with anonymous types placed before named types, so we
only need to identify the starting ID of named types.
Signed-off-by: Donglin Peng <pengdonglin@xiaomi.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260109130003.3313716-8-dolinux.peng@gmail.com
Improve btf_find_by_name_kind() performance by adding binary search
support for sorted types. Falls back to linear search for compatibility.
Signed-off-by: Donglin Peng <pengdonglin@xiaomi.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260109130003.3313716-7-dolinux.peng@gmail.com
cilium bpf_wiregard.bpf.c when compiled with -O1 fails to load
with the following verifier log:
192: (79) r2 = *(u64 *)(r10 -304) ; R2=pkt(r=40) R10=fp0 fp-304=pkt(r=40)
...
227: (85) call bpf_skb_store_bytes#9 ; R0=scalar()
228: (bc) w2 = w0 ; R0=scalar() R2=scalar(smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff))
229: (c4) w2 s>>= 31 ; R2=scalar(smin=0,smax=umax=0xffffffff,smin32=-1,smax32=0,var_off=(0x0; 0xffffffff))
230: (54) w2 &= -134 ; R2=scalar(smin=0,smax=umax=umax32=0xffffff7a,smax32=0x7fffff7a,var_off=(0x0; 0xffffff7a))
...
232: (66) if w2 s> 0xffffffff goto pc+125 ; R2=scalar(smin=umin=umin32=0x80000000,smax=umax=umax32=0xffffff7a,smax32=-134,var_off=(0x80000000; 0x7fffff7a))
...
238: (79) r4 = *(u64 *)(r10 -304) ; R4=scalar() R10=fp0 fp-304=scalar()
239: (56) if w2 != 0xffffff78 goto pc+210 ; R2=0xffffff78 // -136
...
258: (71) r1 = *(u8 *)(r4 +0)
R4 invalid mem access 'scalar'
The error might confuse most bpf authors, since fp-304 slot had 'pkt'
pointer at insn 192 and became 'scalar' at 238. That happened because
bpf_skb_store_bytes() clears all packet pointers including those in
the stack. On the first glance it might look like a bug in the source
code, since ctx->data pointer should have been reloaded after the call
to bpf_skb_store_bytes().
The relevant part of cilium source code looks like this:
// bpf/lib/nodeport.h
int dsr_set_ipip6()
{
if (ctx_adjust_hroom(...))
return DROP_INVALID; // -134
if (ctx_store_bytes(...))
return DROP_WRITE_ERROR; // -141
return 0;
}
bool dsr_fail_needs_reply(int code)
{
if (code == DROP_FRAG_NEEDED) // -136
return true;
return false;
}
tail_nodeport_ipv6_dsr()
{
ret = dsr_set_ipip6(...);
if (!IS_ERR(ret)) {
...
} else {
if (dsr_fail_needs_reply(ret))
return dsr_reply_icmp6(...);
}
}
The code doesn't have arithmetic shift by 31 and it reloads ctx->data
every time it needs to access it. So it's not a bug in the source code.
The reason is DAGCombiner::foldSelectCCToShiftAnd() LLVM transformation:
// If this is a select where the false operand is zero and the compare is a
// check of the sign bit, see if we can perform the "gzip trick":
// select_cc setlt X, 0, A, 0 -> and (sra X, size(X)-1), A
// select_cc setgt X, 0, A, 0 -> and (not (sra X, size(X)-1)), A
The conditional branch in dsr_set_ipip6() and its return values
are optimized into BPF_ARSH plus BPF_AND:
227: (85) call bpf_skb_store_bytes#9
228: (bc) w2 = w0
229: (c4) w2 s>>= 31 ; R2=scalar(smin=0,smax=umax=0xffffffff,smin32=-1,smax32=0,var_off=(0x0; 0xffffffff))
230: (54) w2 &= -134 ; R2=scalar(smin=0,smax=umax=umax32=0xffffff7a,smax32=0x7fffff7a,var_off=(0x0; 0xffffff7a))
after insn 230 the register w2 can only be 0 or -134,
but the verifier approximates it, since there is no way to
represent two scalars in bpf_reg_state.
After fallthough at insn 232 the w2 can only be -134,
hence the branch at insn
239: (56) if w2 != -136 goto pc+210
should be always taken, and trapping insn 258 should never execute.
LLVM generated correct code, but the verifier follows impossible
path and rejects valid program. To fix this issue recognize this
special LLVM optimization and fork the verifier state.
So after insn 229: (c4) w2 s>>= 31
the verifier has two states to explore:
one with w2 = 0 and another with w2 = 0xffffffff
which makes the verifier accept bpf_wiregard.c
A similar pattern exists were OR operation is used in place of the AND
operation, the verifier detects that pattern as well by forking the
state before the OR operation with a scalar in range [-1,0].
Note there are 20+ such patterns in bpf_wiregard.o compiled
with -O1 and -O2, but they're rarely seen in other production
bpf programs, so push_stack() approach is not a concern.
Reported-by: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Co-developed-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260112201424.816836-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Replace the pattern of declaring a local regs array from cur_regs()
and then indexing into it with the more concise reg_state() helper.
This simplifies the code by eliminating intermediate variables and
makes register access more consistent throughout the verifier.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20260113134826.2214860-1-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ensure that registered destructor kfuncs have the same type
as btf_dtor_kfunc_t to avoid a kernel panic on systems with
CONFIG_CFI enabled.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260110082548.113748-10-samitolvanen@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With CONFIG_CFI enabled, the kernel strictly enforces that indirect
function calls use a function pointer type that matches the target
function. I ran into the following type mismatch when running BPF
self-tests:
CFI failure at bpf_obj_free_fields+0x190/0x238 (target:
bpf_crypto_ctx_release+0x0/0x94; expected type: 0xa488ebfc)
Internal error: Oops - CFI: 00000000f2008228 [#1] SMP
...
As bpf_crypto_ctx_release() is also used in BPF programs and using
a void pointer as the argument would make the verifier unhappy, add
a simple stub function with the correct type and register it as the
destructor kfunc instead.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Tested-by: Viktor Malik <vmalik@redhat.com>
Link: https://lore.kernel.org/r/20260110082548.113748-7-samitolvanen@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF_MAP_TYPE_INSN_ARRAY maps store instruction pointers in their
ips array, not string data. The map_direct_value_addr callback for
this map type returns the address of the ips array, which is not
suitable for use as a constant string argument.
When a BPF program passes a pointer to an insn_array map value as
ARG_PTR_TO_CONST_STR (e.g., to bpf_snprintf), the verifier's
null-termination check in check_reg_const_str() operates on the
wrong memory region, and at runtime bpf_bprintf_prepare() can read
out of bounds searching for a null terminator.
Reject BPF_MAP_TYPE_INSN_ARRAY in check_reg_const_str() since this
map type is not designed to hold string data.
Reported-by: syzbot+2c29addf92581b410079@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2c29addf92581b410079
Tested-by: syzbot+2c29addf92581b410079@syzkaller.appspotmail.com
Fixes: 493d9e0d60 ("bpf, x86: add support for indirect jumps")
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Acked-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20260107021037.289644-1-kartikey406@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce BPF_F_ALL_CPUS flag support for percpu_cgroup_storage maps to
allow updating values for all CPUs with a single value for update_elem
API.
Introduce BPF_F_CPU flag support for percpu_cgroup_storage maps to
allow:
* update value for specified CPU for update_elem API.
* lookup value for specified CPU for lookup_elem API.
The BPF_F_CPU flag is passed via map_flags along with embedded cpu info.
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260107022022.12843-6-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Copy map value using 'copy_map_value_long()'. It's to keep consistent
style with the way of other percpu maps.
No functional change intended.
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260107022022.12843-5-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce BPF_F_ALL_CPUS flag support for percpu_hash and lru_percpu_hash
maps to allow updating values for all CPUs with a single value for both
update_elem and update_batch APIs.
Introduce BPF_F_CPU flag support for percpu_hash and lru_percpu_hash
maps to allow:
* update value for specified CPU for both update_elem and update_batch
APIs.
* lookup value for specified CPU for both lookup_elem and lookup_batch
APIs.
The BPF_F_CPU flag is passed via:
* map_flags along with embedded cpu info.
* elem_flags along with embedded cpu info.
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260107022022.12843-4-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce support for the BPF_F_ALL_CPUS flag in percpu_array maps to
allow updating values for all CPUs with a single value for both
update_elem and update_batch APIs.
Introduce support for the BPF_F_CPU flag in percpu_array maps to allow:
* update value for specified CPU for both update_elem and update_batch
APIs.
* lookup value for specified CPU for both lookup_elem and lookup_batch
APIs.
The BPF_F_CPU flag is passed via:
* map_flags of lookup_elem and update_elem APIs along with embedded cpu
info.
* elem_flags of lookup_batch and update_batch APIs along with embedded
cpu info.
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260107022022.12843-3-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags and check them for
following APIs:
* 'map_lookup_elem()'
* 'map_update_elem()'
* 'generic_map_lookup_batch()'
* 'generic_map_update_batch()'
And, get the correct value size for these APIs.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260107022022.12843-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The bpf_arena_*_pages() kfuncs can be called from sleepable contexts,
but the verifier still prevents BPF programs from calling them while
holding a spinlock. Amend the verifier to allow for BPF programs
calling arena page management functions while holding a lock.
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260106-arena-under-lock-v2-2-378e9eab3066@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The in_sleepable_context() function is used to specialize the BPF code
in do_misc_fixups(). With the addition of nonsleepable arena kfuncs,
there are kfuncs whose specialization depends on whether we are
holding a lock. We should use the nonsleepable version while
holding a lock and the sleepable one when not.
Add a check for active_locks to account for locking when specializing
arena kfuncs.
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260106-arena-under-lock-v2-1-378e9eab3066@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The __opt annotation was originally introduced specifically for
buffer/size argument pairs in bpf_dynptr_slice() and
bpf_dynptr_slice_rdwr(), allowing the buffer pointer to be NULL while
still validating the size as a constant. The __nullable annotation
serves the same purpose but is more general and is already used
throughout the BPF subsystem for raw tracepoints, struct_ops, and other
kfuncs.
This patch unifies the two annotations by replacing __opt with
__nullable. The key change is in the verifier's
get_kfunc_ptr_arg_type() function, where mem/size pair detection is now
performed before the nullable check. This ensures that buffer/size
pairs are correctly classified as KF_ARG_PTR_TO_MEM_SIZE even when the
buffer is nullable, while adding an !arg_mem_size condition to the
nullable check prevents interference with mem/size pair handling.
When processing KF_ARG_PTR_TO_MEM_SIZE arguments, the verifier now uses
is_kfunc_arg_nullable() instead of the removed is_kfunc_arg_optional()
to determine whether to skip size validation for NULL buffers.
This is the first documentation added for the __nullable annotation,
which has been in use since it was introduced but was previously
undocumented.
No functional changes to verifier behavior - nullable buffer/size pairs
continue to work exactly as before.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260102221513.1961781-1-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When arena allocations were converted from bpf_map_alloc_pages() to
kmalloc_nolock() to support non-sleepable contexts, memcg accounting was
inadvertently lost. This commit restores proper memory accounting for
all arena-related allocations.
All arena related allocations are accounted into memcg of the process
that created bpf_arena.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260102200230.25168-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce bpf_map_memcg_enter() and bpf_map_memcg_exit() helpers to
reduce code duplication in memcg context management.
bpf_map_memcg_enter() gets the memcg from the map, sets it as active,
and returns both the previous and the now active memcg.
bpf_map_memcg_exit() restores the previous active memcg and releases the
reference obtained during enter.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260102200230.25168-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that KF_TRUSTED_ARGS is the default for all kfuncs, remove the
explicit KF_TRUSTED_ARGS flag from all kfunc definitions and remove the
flag itself.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260102180038.2708325-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Change the verifier to make trusted args the default requirement for
all kfuncs by removing is_kfunc_trusted_args() assuming it be to always
return true.
This works because:
1. Context pointers (xdp_md, __sk_buff, etc.) are handled through their
own KF_ARG_PTR_TO_CTX case label and bypass the trusted check
2. Struct_ops callback arguments are already marked as PTR_TRUSTED during
initialization and pass is_trusted_reg()
3. KF_RCU kfuncs are handled separately via is_kfunc_rcu() checks at
call sites (always checked with || alongside is_kfunc_trusted_args)
This simple change makes all kfuncs require trusted args by default
while maintaining correct behavior for all existing special cases.
Note: This change means kfuncs that previously accepted NULL pointers
without KF_TRUSTED_ARGS will now reject NULL at verification time.
Several netfilter kfuncs are affected: bpf_xdp_ct_lookup(),
bpf_skb_ct_lookup(), bpf_xdp_ct_alloc(), and bpf_skb_ct_alloc() all
accept NULL for their bpf_tuple and opts parameters internally (checked
in __bpf_nf_ct_lookup), but after this change the verifier rejects NULL
before the kfunc is even called. This is acceptable because these kfuncs
don't work with NULL parameters in their proper usage. Now they will be
rejected rather than returning an error, which shouldn't make a
difference to BPF programs that were using these kfuncs properly.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260102180038.2708325-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Within an iterator or callback based loop, it should be safe to prune
the current state if the old state stack slot is marked as
STACK_INVALID or STACK_MISC:
- either all branches of the old state lead to a program exit;
- or some branch of the old state leads the current state.
This is the same logic as applied in non-loop cases when
states_equal() is called in NOT_EXACT mode.
The test case that exercises stacksafe() and demonstrates the
difference in verification performance is included in the next patch.
I'm not sure if it is possible to prepare a test case that exercises
regsafe(); it appears that the compute_live_registers() pass makes
this impossible.
Nevertheless, for code readability reasons, I think that stacksafe()
and regsafe() should handle STACK_INVALID / NOT_INIT symmetrically.
Hence, this commit changes both functions.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251230-loop-stack-misc-pruning-v1-1-585cfd6cec51@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Calls like bpf_loop() or bpf_for_each_map_elem() introduce loops that
are not explicitly present in the control-flow graph. The verifier
processes such calls by repeatedly interpreting the callback function
body within the same verification path (until the current state
converges with a previous state).
Such loops require a bpf_scc_visit instance in order to allow the
accumulation of the state graph backedges. Otherwise, certain
checkpoint states created within the bodies of such loops will have
incomplete precision marks.
See the next patch for an example of a program that leads to the
verifier accepting an unsafe program.
Fixes: 96c6aa4c63 ("bpf: compute SCCs in program control flow graph")
Fixes: c9e31900b5 ("bpf: propagate read/precision marks over state graph backedges")
Reported-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20251229-scc-for-callbacks-v1-1-ceadfe679900@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make arena related kfuncs any context safe by the following changes:
bpf_arena_alloc_pages() and bpf_arena_reserve_pages():
Replace the usage of the mutex with a rqspinlock for range tree and use
kmalloc_nolock() wherever needed. Use free_pages_nolock() to free pages
from any context.
apply_range_set/clear_cb() with apply_to_page_range() has already made
populating the vm_area in bpf_arena_alloc_pages() any context safe.
bpf_arena_free_pages(): defer the main logic to a workqueue if it is
called from a non-sleepable context.
specialize_kfunc() is used to replace the sleepable arena_free_pages()
with bpf_arena_free_pages_non_sleepable() when the verifier detects the
call is from a non-sleepable context.
In the non-sleepable case, arena_free_pages() queues the address and the
page count to be freed to a lock-less list of struct arena_free_spans
and raises an irq_work. The irq_work handler calls schedules_work() as
it is safe to be called from irq context. arena_free_worker() (the work
queue handler) iterates these spans and clears ptes, flushes tlb, zaps
pages, and calls __free_page().
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20251222195022.431211-4-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
To make arena_alloc_pages() safe to be called from any context, replace
kvcalloc() with kmalloc_nolock() so as it doesn't sleep or take any
locks. kmalloc_nolock() returns NULL for allocations larger than
KMALLOC_MAX_CACHE_SIZE, which is (PAGE_SIZE * 2) = 8KB on systems with
4KB pages. So, round down the allocation done by kmalloc_nolock to 1024
* 8 and reuse the array in a loop.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20251222195022.431211-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
vm_area_map_pages() may allocate memory while inserting pages into bpf
arena's vm_area. In order to make bpf_arena_alloc_pages() kfunc
non-sleepable change bpf arena to populate pages without
allocating memory:
- at arena creation time populate all page table levels except
the last level
- when new pages need to be inserted call apply_to_page_range() again
with apply_range_set_cb() which will only set_pte_at() those pages and
will not allocate memory.
- when freeing pages call apply_to_existing_page_range with
apply_range_clear_cb() to clear the pte for the page to be removed. This
doesn't free intermediate page table levels.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20251222195022.431211-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The -EEXIST error code is reserved by the module loading infrastructure
to indicate that a module is already loaded. When a module's init
function returns -EEXIST, userspace tools like kmod interpret this as
"module already loaded" and treat the operation as successful, returning
0 to the user even though the module initialization actually failed.
This follows the precedent set by commit 54416fd767 ("netfilter:
conntrack: helper: Replace -EEXIST by -EBUSY") which fixed the same
issue in nf_conntrack_helper_register().
This affects bpf_crypto_skcipher module. While the configuration
required to build it as a module is unlikely in practice, it is
technically possible, so fix it for correctness.
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/r/20251220-dev-module-init-eexists-bpf-v1-1-7f186663dbe7@samsung.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Associate raw tracepoint program type with the kfunc tracing hook. This
allows calling kfuncs from raw_tp programs.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20251222133250.1890587-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
As reported in [0], anonymous memory mappings are not backed by a
struct file instance. Consequently, the struct file pointer passed to
the security_mmap_file() LSM hook is NULL in such cases.
The BPF verifier is currently unaware of this, allowing BPF LSM
programs to dereference this struct file pointer without needing to
perform an explicit NULL check. This leads to potential NULL pointer
dereference and a kernel crash.
Add a strong override for bpf_lsm_mmap_file() which annotates the
struct file pointer parameter with the __nullable suffix. This
explicitly informs the BPF verifier that this pointer (PTR_MAYBE_NULL)
can be NULL, forcing BPF LSM programs to perform a check on it before
dereferencing it.
[0] https://lore.kernel.org/bpf/5e460d3c.4c3e9.19adde547d8.Coremail.kaiyanm@hust.edu.cn/
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Closes: https://lore.kernel.org/bpf/5e460d3c.4c3e9.19adde547d8.Coremail.kaiyanm@hust.edu.cn/
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20251216133000.3690723-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF programs detect recursion using a per-CPU 'active' flag in struct
bpf_prog. The trampoline currently sets/clears this flag with atomic
operations.
On some arm64 platforms (e.g., Neoverse V2 with LSE), per-CPU atomic
operations are relatively slow. Unlike x86_64 - where per-CPU updates
can avoid cross-core atomicity, arm64 LSE atomics are always atomic
across all cores, which is unnecessary overhead for strictly per-CPU
state.
This patch removes atomics from the recursion detection path on arm64 by
changing 'active' to a per-CPU array of four u8 counters, one per
context: {NMI, hard-irq, soft-irq, normal}. The running context uses a
non-atomic increment/decrement on its element. After increment,
recursion is detected by reading the array as a u32 and verifying that
only the expected element changed; any change in another element
indicates inter-context recursion, and a value > 1 in the same element
indicates same-context recursion.
For example, starting from {0,0,0,0}, a normal-context trigger changes
the array to {0,0,0,1}. If an NMI arrives on the same CPU and triggers
the program, the array becomes {1,0,0,1}. When the NMI context checks
the u32 against the expected mask for normal (0x00000001), it observes
0x01000001 and correctly reports recursion. Same-context recursion is
detected analogously.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20251219184422.2899902-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF programs detect recursion by doing atomic inc/dec on a per-cpu
active counter from the trampoline. Create two helpers for operations on
this active counter, this makes it easy to changes the recursion
detection logic in future.
This commit makes no functional changes.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20251219184422.2899902-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----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=wHLt
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Fix BPF builds due to -fms-extensions. selftests (Alexei
Starovoitov), bpftool (Quentin Monnet).
- Fix build of net/smc when CONFIG_BPF_SYSCALL=y, but CONFIG_BPF_JIT=n
(Geert Uytterhoeven)
- Fix livepatch/BPF interaction and support reliable unwinding through
BPF stack frames (Josh Poimboeuf)
- Do not audit capability check in arm64 JIT (Ondrej Mosnacek)
- Fix truncated dmabuf BPF iterator reads (T.J. Mercier)
- Fix verifier assumptions of bpf_d_path's output buffer (Shuran Liu)
- Fix warnings in libbpf when built with -Wdiscarded-qualifiers under
C23 (Mikhail Gavrilov)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: add regression test for bpf_d_path()
bpf: Fix verifier assumptions of bpf_d_path's output buffer
selftests/bpf: Add test for truncated dmabuf_iter reads
bpf: Fix truncated dmabuf iterator reads
x86/unwind/orc: Support reliable unwinding through BPF stack frames
bpf: Add bpf_has_frame_pointer()
bpf, arm64: Do not audit capability check in do_jit()
libbpf: Fix -Wdiscarded-qualifiers under C23
bpftool: Fix build warnings due to MS extensions
net: smc: SMC_HS_CTRL_BPF should depend on BPF_JIT
selftests/bpf: Add -fms-extensions to bpf build flags
The verifier currently limits direct offsets into a map to 512MiB
to avoid overflow during pointer arithmetic. However, this prevents
arena maps from using direct addressing instructions to access data
at the end of > 512MiB arena maps. This is necessary when moving
arena globals to the end of the arena instead of the front.
Refactor the verifier code to remove the offset calculation during
direct value access calculations. This is possible because the only
two map types that implement .map_direct_value_addr() are arrays and
arenas, and they both do their own internal checks to ensure the
offset is within bounds.
Adjust selftests that expect the old error. These tests still fail
because the verifier identifies the access as out of bounds for the
map, so change them to expect an "invalid access to map value pointer"
error instead.
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251216173325.98465-3-emil@etsalapatis.com
Commit af65320948 ("bpf: Bump iter seq size to support BTF
representation of large data structures") increased the fixed buffer
size from PAGE_SIZE to PAGE_SIZE << 3, but the docs for the function
didn't get updated at the same time. Update them.
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20251207091005.2829703-1-tjmercier@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch improves the verifier to correctly compute bounds for
sign extension compiler pattern composed of left shift by 32bits
followed by a sign right shift by 32bits. Pattern in the verifier was
limitted to positive value bounds and would reset bound computation for
negative values. New code allows both positive and negative values for
sign extension without compromising bound computation and verifier to
pass.
This change is required by GCC which generate such pattern, and was
detected in the context of systemd, as described in the following GCC
bugzilla: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=119731
Three new tests were added in verifier_subreg.c.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Signed-off-by: Andrew Pinski <andrew.pinski@oss.qualcomm.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Cc: David Faust <david.faust@oracle.com>
Cc: Jose Marchesi <jose.marchesi@oracle.com>
Cc: Elena Zannoni <elena.zannoni@oracle.com>
Link: https://lore.kernel.org/r/20251202180220.11128-2-cupertino.miranda@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
After commit 9216477449 ("bpf: cpumap: Add the possibility to attach
an eBPF program to cpumap"), __cpu_map_entry_alloc() may fail with
errors other than -ENOMEM, such as -EBADF or -EINVAL.
However, __cpu_map_entry_alloc() returns NULL on all failures, and
cpu_map_update_elem() unconditionally converts this NULL into -ENOMEM.
As a result, user space always receives -ENOMEM regardless of the actual
underlying error.
Examples of unexpected behavior:
- Nonexistent fd : -ENOMEM (should be -EBADF)
- Non-BPF fd : -ENOMEM (should be -EINVAL)
- Bad attach type : -ENOMEM (should be -EINVAL)
Change __cpu_map_entry_alloc() to return ERR_PTR(err) instead of NULL
and have cpu_map_update_elem() propagate this error.
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20251208131449.73036-2-enjuk@amazon.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If there is a large number (hundreds) of dmabufs allocated, the text
output generated from dmabuf_iter_seq_show can exceed common user buffer
sizes (e.g. PAGE_SIZE) necessitating multiple start/stop cycles to
iterate through all dmabufs. However the dmabuf iterator currently
returns NULL in dmabuf_iter_seq_start for all non-zero pos values, which
results in the truncation of the output before all dmabufs are handled.
After dma_buf_iter_begin / dma_buf_iter_next, the refcount of the buffer
is elevated so that the BPF iterator program can run without holding any
locks. When a stop occurs, instead of immediately dropping the reference
on the buffer, stash a pointer to the buffer in seq->priv until
either start is called or the iterator is released. This also enables
the resumption of iteration without first walking through the list of
dmabufs based on the pos value.
Fixes: 76ea955349 ("bpf: Add dmabuf iterator")
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Link: https://lore.kernel.org/r/20251204000348.1413593-1-tjmercier@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce a bpf_has_frame_pointer() helper that unwinders can call to
determine whether a given instruction pointer is within the valid frame
pointer region of a BPF JIT program or trampoline (i.e., after the
prologue, before the epilogue).
This will enable livepatch (with the ORC unwinder) to reliably unwind
through BPF JIT frames.
Acked-by: Song Liu <song@kernel.org>
Acked-and-tested-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/fd2bc5b4e261a680774b28f6100509fd5ebad2f0.1764818927.git.jpoimboe@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Add a new BPF command BPF_PROG_ASSOC_STRUCT_OPS to allow associating
a BPF program with a struct_ops map. This command takes a file
descriptor of a struct_ops map and a BPF program and set
prog->aux->st_ops_assoc to the kdata of the struct_ops map.
The command does not accept a struct_ops program nor a non-struct_ops
map. Programs of a struct_ops map is automatically associated with the
map during map update. If a program is shared between two struct_ops
maps, prog->aux->st_ops_assoc will be poisoned to indicate that the
associated struct_ops is ambiguous. The pointer, once poisoned, cannot
be reset since we have lost track of associated struct_ops. For other
program types, the associated struct_ops map, once set, cannot be
changed later. This restriction may be lifted in the future if there is
a use case.
A kernel helper bpf_prog_get_assoc_struct_ops() can be used to retrieve
the associated struct_ops pointer. The returned pointer, if not NULL, is
guaranteed to be valid and point to a fully updated struct_ops struct.
For struct_ops program reused in multiple struct_ops map, the return
will be NULL.
prog->aux->st_ops_assoc is protected by bumping the refcount for
non-struct_ops programs and RCU for struct_ops programs. Since it would
be inefficient to track programs associated with a struct_ops map, every
non-struct_ops program will bump the refcount of the map to make sure
st_ops_assoc stays valid. For a struct_ops program, it is protected by
RCU as map_free will wait for an RCU grace period before disassociating
the program with the map. The helper must be called in BPF program
context or RCU read-side critical section.
struct_ops implementers should note that the struct_ops returned may not
be initialized nor attached yet. The struct_ops implementer will be
responsible for tracking and checking the state of the associated
struct_ops map if the use case expects an initialized or attached
struct_ops.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20251203233748.668365-3-ameryhung@gmail.com
Allow verifier to fixup kfuncs in kernel module to support kfuncs with
__prog arguments. Currently, special kfuncs and kfuncs with __prog
arguments are kernel kfuncs. Allowing kernel module kfuncs should not
affect existing kfunc fixup as kernel module kfuncs have BTF IDs greater
than kernel kfuncs' BTF IDs.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251203233748.668365-2-ameryhung@gmail.com
dentries of created objects in dcache (and undo it when removing those).
Reference is grabbed and not released, but it's not actually _stored_
anywhere. That works, but it's hard to follow and verify; among other
things, we have no way to tell _which_ of the increments is intended
to be an unpaired one. Worse, on removal we need to decide whether
the reference had already been dropped, which can be non-trivial if
that removal is on umount and we need to figure out if this dentry is
pinned due to e.g. unlink() not done. Usually that is handled by using
kill_litter_super() as ->kill_sb(), but there are open-coded special
cases of the same (consider e.g. /proc/self).
Things get simpler if we introduce a new dentry flag (DCACHE_PERSISTENT)
marking those "leaked" dentries. Having it set claims responsibility
for +1 in refcount.
The end result this series is aiming for:
* get these unbalanced dget() and dput() replaced with new primitives that
would, in addition to adjusting refcount, set and clear persistency flag.
* instead of having kill_litter_super() mess with removing the remaining
"leaked" references (e.g. for all tmpfs files that hadn't been removed
prior to umount), have the regular shrink_dcache_for_umount() strip
DCACHE_PERSISTENT of all dentries, dropping the corresponding
reference if it had been set. After that kill_litter_super() becomes
an equivalent of kill_anon_super().
Doing that in a single step is not feasible - it would affect too many places
in too many filesystems. It has to be split into a series.
This work has really started early in 2024; quite a few preliminary pieces
have already gone into mainline. This chunk is finally getting to the
meat of that stuff - infrastructure and most of the conversions to it.
Some pieces are still sitting in the local branches, but the bulk of
that stuff is here.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCaTEq1wAKCRBZ7Krx/gZQ
643uAQC1rRslhw5l7OjxEpIYbGG4M+QaadN4Nf5Sr2SuTRaPJQD/W4oj/u4C2eCw
Dd3q071tqyvm/PXNgN2EEnIaxlFUlwc=
=rKq+
-----END PGP SIGNATURE-----
Merge tag 'pull-persistency' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull persistent dentry infrastructure and conversion from Al Viro:
"Some filesystems use a kinda-sorta controlled dentry refcount leak to
pin dentries of created objects in dcache (and undo it when removing
those). A reference is grabbed and not released, but it's not actually
_stored_ anywhere.
That works, but it's hard to follow and verify; among other things, we
have no way to tell _which_ of the increments is intended to be an
unpaired one. Worse, on removal we need to decide whether the
reference had already been dropped, which can be non-trivial if that
removal is on umount and we need to figure out if this dentry is
pinned due to e.g. unlink() not done. Usually that is handled by using
kill_litter_super() as ->kill_sb(), but there are open-coded special
cases of the same (consider e.g. /proc/self).
Things get simpler if we introduce a new dentry flag
(DCACHE_PERSISTENT) marking those "leaked" dentries. Having it set
claims responsibility for +1 in refcount.
The end result this series is aiming for:
- get these unbalanced dget() and dput() replaced with new primitives
that would, in addition to adjusting refcount, set and clear
persistency flag.
- instead of having kill_litter_super() mess with removing the
remaining "leaked" references (e.g. for all tmpfs files that hadn't
been removed prior to umount), have the regular
shrink_dcache_for_umount() strip DCACHE_PERSISTENT of all dentries,
dropping the corresponding reference if it had been set. After that
kill_litter_super() becomes an equivalent of kill_anon_super().
Doing that in a single step is not feasible - it would affect too many
places in too many filesystems. It has to be split into a series.
This work has really started early in 2024; quite a few preliminary
pieces have already gone into mainline. This chunk is finally getting
to the meat of that stuff - infrastructure and most of the conversions
to it.
Some pieces are still sitting in the local branches, but the bulk of
that stuff is here"
* tag 'pull-persistency' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits)
d_make_discardable(): warn if given a non-persistent dentry
kill securityfs_recursive_remove()
convert securityfs
get rid of kill_litter_super()
convert rust_binderfs
convert nfsctl
convert rpc_pipefs
convert hypfs
hypfs: swich hypfs_create_u64() to returning int
hypfs: switch hypfs_create_str() to returning int
hypfs: don't pin dentries twice
convert gadgetfs
gadgetfs: switch to simple_remove_by_name()
convert functionfs
functionfs: switch to simple_remove_by_name()
functionfs: fix the open/removal races
functionfs: need to cancel ->reset_work in ->kill_sb()
functionfs: don't bother with ffs->ref in ffs_data_{opened,closed}()
functionfs: don't abuse ffs_data_closed() on fs shutdown
convert selinuxfs
...
- The 10 patch series "__vmalloc()/kvmalloc() and no-block support" from
Uladzislau Rezki reworks the vmalloc() code to support non-blocking
allocations (GFP_ATOIC, GFP_NOWAIT).
- The 2 patch series "ksm: fix exec/fork inheritance" from xu xin fixes
a rare case where the KSM MMF_VM_MERGE_ANY prctl state is not inherited
across fork/exec.
- The 4 patch series "mm/zswap: misc cleanup of code and documentations"
from SeongJae Park does some light maintenance work on the zswap code.
- The 5 patch series "mm/page_owner: add debugfs files 'show_handles'
and 'show_stacks_handles'" from Mauricio Faria de Oliveira enhances the
/sys/kernel/debug/page_owner debug feature. It adds unique identifiers
to differentiate the various stack traces so that userspace monitoring
tools can better match stack traces over time.
- The 2 patch series "mm/page_alloc: pcp->batch cleanups" from Joshua
Hahn makes some minor alterations to the page allocator's per-cpu-pages
feature.
- The 2 patch series "Improve UFFDIO_MOVE scalability by removing
anon_vma lock" from Lokesh Gidra addresses a scalability issue in
userfaultfd's UFFDIO_MOVE operation.
- The 2 patch series "kasan: cleanups for kasan_enabled() checks" from
Sabyrzhan Tasbolatov performs some cleanup in the KASAN code.
- The 2 patch series "drivers/base/node: fold node register and
unregister functions" from Donet Tom cleans up the NUMA node handling
code a little.
- The 4 patch series "mm: some optimizations for prot numa" from Kefeng
Wang provides some cleanups and small optimizations to the NUMA
allocation hinting code.
- The 5 patch series "mm/page_alloc: Batch callers of
free_pcppages_bulk" from Joshua Hahn addresses long lock hold times at
boot on large machines. These were causing (harmless) softlockup
warnings.
- The 2 patch series "optimize the logic for handling dirty file folios
during reclaim" from Baolin Wang removes some now-unnecessary work from
page reclaim.
- The 10 patch series "mm/damon: allow DAMOS auto-tuned for per-memcg
per-node memory usage" from SeongJae Park enhances the DAMOS auto-tuning
feature.
- The 2 patch series "mm/damon: fixes for address alignment issues in
DAMON_LRU_SORT and DAMON_RECLAIM" from Quanmin Yan fixes DAMON_LRU_SORT
and DAMON_RECLAIM with certain userspace configuration.
- The 15 patch series "expand mmap_prepare functionality, port more
users" from Lorenzo Stoakes enhances the new(ish)
file_operations.mmap_prepare() method and ports additional callsites
from the old ->mmap() over to ->mmap_prepare().
- The 8 patch series "Fix stale IOTLB entries for kernel address space"
from Lu Baolu fixes a bug (and possible security issue on non-x86) in
the IOMMU code. In some situations the IOMMU could be left hanging onto
a stale kernel pagetable entry.
- The 4 patch series "mm/huge_memory: cleanup __split_unmapped_folio()"
from Wei Yang cleans up and optimizes the folio splitting code.
- The 5 patch series "mm, swap: misc cleanup and bugfix" from Kairui
Song implements some cleanups and a minor fix in the swap discard code.
- The 8 patch series "mm/damon: misc documentation fixups" from SeongJae
Park does as advertised.
- The 9 patch series "mm/damon: support pin-point targets removal" from
SeongJae Park permits userspace to remove a specific monitoring target
in the middle of the current targets list.
- The 2 patch series "mm: MISC follow-up patches for linux/pgalloc.h"
from Harry Yoo implements a couple of cleanups related to mm header file
inclusion.
- The 2 patch series "mm/swapfile.c: select swap devices of default
priority round robin" from Baoquan He improves the selection of swap
devices for NUMA machines.
- The 3 patch series "mm: Convert memory block states (MEM_*) macros to
enums" from Israel Batista changes the memory block labels from macros
to enums so they will appear in kernel debug info.
- The 3 patch series "ksm: perform a range-walk to jump over holes in
break_ksm" from Pedro Demarchi Gomes addresses an inefficiency when KSM
unmerges an address range.
- The 22 patch series "mm/damon/tests: fix memory bugs in kunit tests"
from SeongJae Park fixes leaks and unhandled malloc() failures in DAMON
userspace unit tests.
- The 2 patch series "some cleanups for pageout()" from Baolin Wang
cleans up a couple of minor things in the page scanner's
writeback-for-eviction code.
- The 2 patch series "mm/hugetlb: refactor sysfs/sysctl interfaces" from
Hui Zhu moves hugetlb's sysfs/sysctl handling code into a new file.
- The 9 patch series "introduce VM_MAYBE_GUARD and make it sticky" from
Lorenzo Stoakes makes the VMA guard regions available in /proc/pid/smaps
and improves the mergeability of guarded VMAs.
- The 2 patch series "mm: perform guard region install/remove under VMA
lock" from Lorenzo Stoakes reduces mmap lock contention for callers
performing VMA guard region operations.
- The 2 patch series "vma_start_write_killable" from Matthew Wilcox
starts work in permitting applications to be killed when they are
waiting on a read_lock on the VMA lock.
- The 11 patch series "mm/damon/tests: add more tests for online
parameters commit" from SeongJae Park adds additional userspace testing
of DAMON's "commit" feature.
- The 9 patch series "mm/damon: misc cleanups" from SeongJae Park does
that.
- The 2 patch series "make VM_SOFTDIRTY a sticky VMA flag" from Lorenzo
Stoakes addresses the possible loss of a VMA's VM_SOFTDIRTY flag when
that VMA is merged with another.
- The 16 patch series "mm: support device-private THP" from Balbir Singh
introduces support for Transparent Huge Page (THP) migration in zone
device-private memory.
- The 3 patch series "Optimize folio split in memory failure" from Zi
Yan optimizes folio split operations in the memory failure code.
- The 2 patch series "mm/huge_memory: Define split_type and consolidate
split support checks" from Wei Yang provides some more cleanups in the
folio splitting code.
- The 16 patch series "mm: remove is_swap_[pte, pmd]() + non-swap
entries, introduce leaf entries" from Lorenzo Stoakes cleans up our
handling of pagetable leaf entries by introducing the concept of
'software leaf entries', of type softleaf_t.
- The 4 patch series "reparent the THP split queue" from Muchun Song
reparents the THP split queue to its parent memcg. This is in
preparation for addressing the long-standing "dying memcg" problem,
wherein dead memcg's linger for too long, consuming memory resources.
- The 3 patch series "unify PMD scan results and remove redundant
cleanup" from Wei Yang does a little cleanup in the hugepage collapse
code.
- The 6 patch series "zram: introduce writeback bio batching" from
Sergey Senozhatsky improves zram writeback efficiency by introducing
batched bio writeback support.
- The 4 patch series "memcg: cleanup the memcg stats interfaces" from
Shakeel Butt cleans up our handling of the interrupt safety of some
memcg stats.
- The 4 patch series "make vmalloc gfp flags usage more apparent" from
Vishal Moola cleans up vmalloc's handling of incoming GFP flags.
- The 6 patch series "mm: Add soft-dirty and uffd-wp support for RISC-V"
from Chunyan Zhang teches soft dirty and userfaultfd write protect
tracking to use RISC-V's Svrsw60t59b extension.
- The 5 patch series "mm: swap: small fixes and comment cleanups" from
Youngjun Park fixes a small bug and cleans up some of the swap code.
- The 4 patch series "initial work on making VMA flags a bitmap" from
Lorenzo Stoakes starts work on converting the vma struct's flags to a
bitmap, so we stop running out of them, especially on 32-bit.
- The 2 patch series "mm/swapfile: fix and cleanup swap list iterations"
from Youngjun Park addresses a possible bug in the swap discard code and
cleans things up a little.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaTEb0wAKCRDdBJ7gKXxA
jjfIAP94W4EkCCwNOupnChoG+YWw/JW21anXt5NN+i5svn1yugEAwzvv6A+cAFng
o+ug/fyrfPZG7PLp2R8WFyGIP0YoBA4=
=IUzS
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-12-03-21-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"__vmalloc()/kvmalloc() and no-block support" (Uladzislau Rezki)
Rework the vmalloc() code to support non-blocking allocations
(GFP_ATOIC, GFP_NOWAIT)
"ksm: fix exec/fork inheritance" (xu xin)
Fix a rare case where the KSM MMF_VM_MERGE_ANY prctl state is not
inherited across fork/exec
"mm/zswap: misc cleanup of code and documentations" (SeongJae Park)
Some light maintenance work on the zswap code
"mm/page_owner: add debugfs files 'show_handles' and 'show_stacks_handles'" (Mauricio Faria de Oliveira)
Enhance the /sys/kernel/debug/page_owner debug feature by adding
unique identifiers to differentiate the various stack traces so
that userspace monitoring tools can better match stack traces over
time
"mm/page_alloc: pcp->batch cleanups" (Joshua Hahn)
Minor alterations to the page allocator's per-cpu-pages feature
"Improve UFFDIO_MOVE scalability by removing anon_vma lock" (Lokesh Gidra)
Address a scalability issue in userfaultfd's UFFDIO_MOVE operation
"kasan: cleanups for kasan_enabled() checks" (Sabyrzhan Tasbolatov)
"drivers/base/node: fold node register and unregister functions" (Donet Tom)
Clean up the NUMA node handling code a little
"mm: some optimizations for prot numa" (Kefeng Wang)
Cleanups and small optimizations to the NUMA allocation hinting
code
"mm/page_alloc: Batch callers of free_pcppages_bulk" (Joshua Hahn)
Address long lock hold times at boot on large machines. These were
causing (harmless) softlockup warnings
"optimize the logic for handling dirty file folios during reclaim" (Baolin Wang)
Remove some now-unnecessary work from page reclaim
"mm/damon: allow DAMOS auto-tuned for per-memcg per-node memory usage" (SeongJae Park)
Enhance the DAMOS auto-tuning feature
"mm/damon: fixes for address alignment issues in DAMON_LRU_SORT and DAMON_RECLAIM" (Quanmin Yan)
Fix DAMON_LRU_SORT and DAMON_RECLAIM with certain userspace
configuration
"expand mmap_prepare functionality, port more users" (Lorenzo Stoakes)
Enhance the new(ish) file_operations.mmap_prepare() method and port
additional callsites from the old ->mmap() over to ->mmap_prepare()
"Fix stale IOTLB entries for kernel address space" (Lu Baolu)
Fix a bug (and possible security issue on non-x86) in the IOMMU
code. In some situations the IOMMU could be left hanging onto a
stale kernel pagetable entry
"mm/huge_memory: cleanup __split_unmapped_folio()" (Wei Yang)
Clean up and optimize the folio splitting code
"mm, swap: misc cleanup and bugfix" (Kairui Song)
Some cleanups and a minor fix in the swap discard code
"mm/damon: misc documentation fixups" (SeongJae Park)
"mm/damon: support pin-point targets removal" (SeongJae Park)
Permit userspace to remove a specific monitoring target in the
middle of the current targets list
"mm: MISC follow-up patches for linux/pgalloc.h" (Harry Yoo)
A couple of cleanups related to mm header file inclusion
"mm/swapfile.c: select swap devices of default priority round robin" (Baoquan He)
improve the selection of swap devices for NUMA machines
"mm: Convert memory block states (MEM_*) macros to enums" (Israel Batista)
Change the memory block labels from macros to enums so they will
appear in kernel debug info
"ksm: perform a range-walk to jump over holes in break_ksm" (Pedro Demarchi Gomes)
Address an inefficiency when KSM unmerges an address range
"mm/damon/tests: fix memory bugs in kunit tests" (SeongJae Park)
Fix leaks and unhandled malloc() failures in DAMON userspace unit
tests
"some cleanups for pageout()" (Baolin Wang)
Clean up a couple of minor things in the page scanner's
writeback-for-eviction code
"mm/hugetlb: refactor sysfs/sysctl interfaces" (Hui Zhu)
Move hugetlb's sysfs/sysctl handling code into a new file
"introduce VM_MAYBE_GUARD and make it sticky" (Lorenzo Stoakes)
Make the VMA guard regions available in /proc/pid/smaps and
improves the mergeability of guarded VMAs
"mm: perform guard region install/remove under VMA lock" (Lorenzo Stoakes)
Reduce mmap lock contention for callers performing VMA guard region
operations
"vma_start_write_killable" (Matthew Wilcox)
Start work on permitting applications to be killed when they are
waiting on a read_lock on the VMA lock
"mm/damon/tests: add more tests for online parameters commit" (SeongJae Park)
Add additional userspace testing of DAMON's "commit" feature
"mm/damon: misc cleanups" (SeongJae Park)
"make VM_SOFTDIRTY a sticky VMA flag" (Lorenzo Stoakes)
Address the possible loss of a VMA's VM_SOFTDIRTY flag when that
VMA is merged with another
"mm: support device-private THP" (Balbir Singh)
Introduce support for Transparent Huge Page (THP) migration in zone
device-private memory
"Optimize folio split in memory failure" (Zi Yan)
"mm/huge_memory: Define split_type and consolidate split support checks" (Wei Yang)
Some more cleanups in the folio splitting code
"mm: remove is_swap_[pte, pmd]() + non-swap entries, introduce leaf entries" (Lorenzo Stoakes)
Clean up our handling of pagetable leaf entries by introducing the
concept of 'software leaf entries', of type softleaf_t
"reparent the THP split queue" (Muchun Song)
Reparent the THP split queue to its parent memcg. This is in
preparation for addressing the long-standing "dying memcg" problem,
wherein dead memcg's linger for too long, consuming memory
resources
"unify PMD scan results and remove redundant cleanup" (Wei Yang)
A little cleanup in the hugepage collapse code
"zram: introduce writeback bio batching" (Sergey Senozhatsky)
Improve zram writeback efficiency by introducing batched bio
writeback support
"memcg: cleanup the memcg stats interfaces" (Shakeel Butt)
Clean up our handling of the interrupt safety of some memcg stats
"make vmalloc gfp flags usage more apparent" (Vishal Moola)
Clean up vmalloc's handling of incoming GFP flags
"mm: Add soft-dirty and uffd-wp support for RISC-V" (Chunyan Zhang)
Teach soft dirty and userfaultfd write protect tracking to use
RISC-V's Svrsw60t59b extension
"mm: swap: small fixes and comment cleanups" (Youngjun Park)
Fix a small bug and clean up some of the swap code
"initial work on making VMA flags a bitmap" (Lorenzo Stoakes)
Start work on converting the vma struct's flags to a bitmap, so we
stop running out of them, especially on 32-bit
"mm/swapfile: fix and cleanup swap list iterations" (Youngjun Park)
Address a possible bug in the swap discard code and clean things
up a little
[ This merge also reverts commit ebb9aeb980 ("vfio/nvgrace-gpu:
register device memory for poison handling") because it looks
broken to me, I've asked for clarification - Linus ]
* tag 'mm-stable-2025-12-03-21-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm: fix vma_start_write_killable() signal handling
mm/swapfile: use plist_for_each_entry in __folio_throttle_swaprate
mm/swapfile: fix list iteration when next node is removed during discard
fs/proc/task_mmu.c: fix make_uffd_wp_huge_pte() huge pte handling
mm/kfence: add reboot notifier to disable KFENCE on shutdown
memcg: remove inc/dec_lruvec_kmem_state helpers
selftests/mm/uffd: initialize char variable to Null
mm: fix DEBUG_RODATA_TEST indentation in Kconfig
mm: introduce VMA flags bitmap type
tools/testing/vma: eliminate dependency on vma->__vm_flags
mm: simplify and rename mm flags function for clarity
mm: declare VMA flags by bit
zram: fix a spelling mistake
mm/page_alloc: optimize lowmem_reserve max lookup using its semantic monotonicity
mm/vmscan: skip increasing kswapd_failures when reclaim was boosted
pagemap: update BUDDY flag documentation
mm: swap: remove scan_swap_map_slots() references from comments
mm: swap: change swap_alloc_slow() to void
mm, swap: remove redundant comment for read_swap_cache_async
mm, swap: use SWP_SOLIDSTATE to determine if swap is rotational
...
Core & protocols
----------------
- Replace busylock at the Tx queuing layer with a lockless list. Resulting
in a 300% (4x) improvement on heavy TX workloads, sending twice the
number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue. Normally we perform queue re-selection when flow comes out
of idle, but under extreme circumstances the flows may be constantly
busy. Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already did
for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is sadly
quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for packets.
- Make MPTCP use Rx backlog processing. This lowers the lock pressure,
improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor fit
for modern container workloads, where limits are imposed using cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid unnecessarily
aggressive rcvbuf growth and overshot when the connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC 5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API
----------
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics,
as defined by the OPEN Alliance's "Advanced diagnostic features
for 100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads IPsec
and performs RSS.
- Add info to devlink params whether the current setting is the default
or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame duplication
for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers
--------------
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback
for reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which supports
Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as other
drivers) to avoid wasting resources if feature is unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211 debugfs
interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=UoDR
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
-----BEGIN PGP SIGNATURE-----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=kaCJ
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Convert selftests/bpf/test_tc_edt and test_tc_tunnel from .sh to
test_progs runner (Alexis Lothoré)
- Convert selftests/bpf/test_xsk to test_progs runner (Bastien
Curutchet)
- Replace bpf memory allocator with kmalloc_nolock() in
bpf_local_storage (Amery Hung), and in bpf streams and range tree
(Puranjay Mohan)
- Introduce support for indirect jumps in BPF verifier and x86 JIT
(Anton Protopopov) and arm64 JIT (Puranjay Mohan)
- Remove runqslower bpf tool (Hoyeon Lee)
- Fix corner cases in the verifier to close several syzbot reports
(Eduard Zingerman, KaFai Wan)
- Several improvements in deadlock detection in rqspinlock (Kumar
Kartikeya Dwivedi)
- Implement "jmp" mode for BPF trampoline and corresponding
DYNAMIC_FTRACE_WITH_JMP. It improves "fexit" program type performance
from 80 M/s to 136 M/s. With Steven's Ack. (Menglong Dong)
- Add ability to test non-linear skbs in BPF_PROG_TEST_RUN (Paul
Chaignon)
- Do not let BPF_PROG_TEST_RUN emit invalid GSO types to stack (Daniel
Borkmann)
- Generalize buildid reader into bpf_dynptr (Mykyta Yatsenko)
- Optimize bpf_map_update_elem() for map-in-map types (Ritesh
Oedayrajsingh Varma)
- Introduce overwrite mode for BPF ring buffer (Xu Kuohai)
* tag 'bpf-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (169 commits)
bpf: optimize bpf_map_update_elem() for map-in-map types
bpf: make kprobe_multi_link_prog_run always_inline
selftests/bpf: do not hardcode target rate in test_tc_edt BPF program
selftests/bpf: remove test_tc_edt.sh
selftests/bpf: integrate test_tc_edt into test_progs
selftests/bpf: rename test_tc_edt.bpf.c section to expose program type
selftests/bpf: Add success stats to rqspinlock stress test
rqspinlock: Precede non-head waiter queueing with AA check
rqspinlock: Disable spinning for trylock fallback
rqspinlock: Use trylock fallback when per-CPU rqnode is busy
rqspinlock: Perform AA checks immediately
rqspinlock: Enclose lock/unlock within lock entry acquisitions
bpf: Remove runqslower tool
selftests/bpf: Remove usage of lsm/file_alloc_security in selftest
bpf: Disable file_alloc_security hook
bpf: check for insn arrays in check_ptr_alignment
bpf: force BPF_F_RDONLY_PROG on insn array creation
bpf: Fix exclusive map memory leak
selftests/bpf: Make CS length configurable for rqspinlock stress test
selftests/bpf: Add lock wait time stats to rqspinlock stress test
...
by in_hardirq() and marked deprecated in 2020.
-----BEGIN PGP SIGNATURE-----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=6LKf
-----END PGP SIGNATURE-----
Merge tag 'core-core-2025-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core irq cleanup from Thomas Gleixner:
"Tree wide cleanup of the remaining users of in_irq() which got
replaced by in_hardirq() and marked deprecated in 2020"
* tag 'core-core-2025-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide: Remove in_irq()
Callchain support:
- Add support for deferred user-space stack unwinding for
perf, enabled on x86. (Peter Zijlstra, Steven Rostedt)
- unwind_user/x86: Enable frame pointer unwinding on x86
(Josh Poimboeuf)
x86 PMU support and infrastructure:
- x86/insn: Simplify for_each_insn_prefix() (Peter Zijlstra)
- x86/insn,uprobes,alternative: Unify insn_is_nop()
(Peter Zijlstra)
Intel PMU driver:
- Large series to prepare for and implement architectural PEBS
support for Intel platforms such as Clearwater Forest (CWF)
and Panther Lake (PTL). (Dapeng Mi, Kan Liang)
- Check dynamic constraints (Kan Liang)
- Optimize PEBS extended config (Peter Zijlstra)
- cstates: Remove PC3 support from LunarLake (Zhang Rui)
- cstates: Add Pantherlake support (Zhang Rui)
- cstates: Clearwater Forest support (Zide Chen)
AMD PMU driver:
- x86/amd: Check event before enable to avoid GPF (George Kennedy)
Fixes and cleanups:
- task_work: Fix NMI race condition (Peter Zijlstra)
- perf/x86: Fix NULL event access and potential PEBS record loss
(Dapeng Mi)
- Misc other fixes and cleanups.
(Dapeng Mi, Ingo Molnar, Peter Zijlstra)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=/8GE
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Callchain support:
- Add support for deferred user-space stack unwinding for perf,
enabled on x86. (Peter Zijlstra, Steven Rostedt)
- unwind_user/x86: Enable frame pointer unwinding on x86 (Josh
Poimboeuf)
x86 PMU support and infrastructure:
- x86/insn: Simplify for_each_insn_prefix() (Peter Zijlstra)
- x86/insn,uprobes,alternative: Unify insn_is_nop() (Peter Zijlstra)
Intel PMU driver:
- Large series to prepare for and implement architectural PEBS
support for Intel platforms such as Clearwater Forest (CWF) and
Panther Lake (PTL). (Dapeng Mi, Kan Liang)
- Check dynamic constraints (Kan Liang)
- Optimize PEBS extended config (Peter Zijlstra)
- cstates:
- Remove PC3 support from LunarLake (Zhang Rui)
- Add Pantherlake support (Zhang Rui)
- Clearwater Forest support (Zide Chen)
AMD PMU driver:
- x86/amd: Check event before enable to avoid GPF (George Kennedy)
Fixes and cleanups:
- task_work: Fix NMI race condition (Peter Zijlstra)
- perf/x86: Fix NULL event access and potential PEBS record loss
(Dapeng Mi)
- Misc other fixes and cleanups (Dapeng Mi, Ingo Molnar, Peter
Zijlstra)"
* tag 'perf-core-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
perf/x86/intel: Fix and clean up intel_pmu_drain_arch_pebs() type use
perf/x86/intel: Optimize PEBS extended config
perf/x86/intel: Check PEBS dyn_constraints
perf/x86/intel: Add a check for dynamic constraints
perf/x86/intel: Add counter group support for arch-PEBS
perf/x86/intel: Setup PEBS data configuration and enable legacy groups
perf/x86/intel: Update dyn_constraint base on PEBS event precise level
perf/x86/intel: Allocate arch-PEBS buffer and initialize PEBS_BASE MSR
perf/x86/intel: Process arch-PEBS records or record fragments
perf/x86/intel/ds: Factor out PEBS group processing code to functions
perf/x86/intel/ds: Factor out PEBS record processing code to functions
perf/x86/intel: Initialize architectural PEBS
perf/x86/intel: Correct large PEBS flag check
perf/x86/intel: Replace x86_pmu.drain_pebs calling with static call
perf/x86: Fix NULL event access and potential PEBS record loss
perf/x86: Remove redundant is_x86_event() prototype
entry,unwind/deferred: Fix unwind_reset_info() placement
unwind_user/x86: Fix arch=um build
perf: Support deferred user unwind
unwind_user/x86: Teach FP unwind about start of function
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaSmOZwAKCRCRxhvAZXjc
op0AAP4oNVJkFyvgKoPos5K2EGFB8M7merGhpYtsOoeg8UK6OwD/UySQErHsXQDR
sUDDa5uFOhfrkcfM8REtAN4wF8p5qAc=
=QgFD
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.19-rc1.fd_prepare.fs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull fd prepare updates from Christian Brauner:
"This adds the FD_ADD() and FD_PREPARE() primitive. They simplify the
common pattern of get_unused_fd_flags() + create file + fd_install()
that is used extensively throughout the kernel and currently requires
cumbersome cleanup paths.
FD_ADD() - For simple cases where a file is installed immediately:
fd = FD_ADD(O_CLOEXEC, vfio_device_open_file(device));
if (fd < 0)
vfio_device_put_registration(device);
return fd;
FD_PREPARE() - For cases requiring access to the fd or file, or
additional work before publishing:
FD_PREPARE(fdf, O_CLOEXEC, sync_file->file);
if (fdf.err) {
fput(sync_file->file);
return fdf.err;
}
data.fence = fd_prepare_fd(fdf);
if (copy_to_user((void __user *)arg, &data, sizeof(data)))
return -EFAULT;
return fd_publish(fdf);
The primitives are centered around struct fd_prepare. FD_PREPARE()
encapsulates all allocation and cleanup logic and must be followed by
a call to fd_publish() which associates the fd with the file and
installs it into the caller's fdtable. If fd_publish() isn't called,
both are deallocated automatically. FD_ADD() is a shorthand that does
fd_publish() immediately and never exposes the struct to the caller.
I've implemented this in a way that it's compatible with the cleanup
infrastructure while also being usable separately. IOW, it's centered
around struct fd_prepare which is aliased to class_fd_prepare_t and so
we can make use of all the basica guard infrastructure"
* tag 'vfs-6.19-rc1.fd_prepare.fs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (42 commits)
io_uring: convert io_create_mock_file() to FD_PREPARE()
file: convert replace_fd() to FD_PREPARE()
vfio: convert vfio_group_ioctl_get_device_fd() to FD_ADD()
tty: convert ptm_open_peer() to FD_ADD()
ntsync: convert ntsync_obj_get_fd() to FD_PREPARE()
media: convert media_request_alloc() to FD_PREPARE()
hv: convert mshv_ioctl_create_partition() to FD_ADD()
gpio: convert linehandle_create() to FD_PREPARE()
pseries: port papr_rtas_setup_file_interface() to FD_ADD()
pseries: convert papr_platform_dump_create_handle() to FD_ADD()
spufs: convert spufs_gang_open() to FD_PREPARE()
papr-hvpipe: convert papr_hvpipe_dev_create_handle() to FD_PREPARE()
spufs: convert spufs_context_open() to FD_PREPARE()
net/socket: convert __sys_accept4_file() to FD_ADD()
net/socket: convert sock_map_fd() to FD_ADD()
net/kcm: convert kcm_ioctl() to FD_PREPARE()
net/handshake: convert handshake_nl_accept_doit() to FD_PREPARE()
secretmem: convert memfd_secret() to FD_ADD()
memfd: convert memfd_create() to FD_ADD()
bpf: convert bpf_token_create() to FD_PREPARE()
...
Updating a BPF_MAP_TYPE_HASH_OF_MAPS or BPF_MAP_TYPE_ARRAY_OF_MAPS via
bpf_map_update_elem() is very expensive.
In one of our workloads, we're inserting ~1400 maps of type
BPF_MAP_TYPE_ARRAY into a BPF_MAP_TYPE_ARRAY_OF_MAPS. This takes ~21
seconds on a single thread, with an average of ~15ms per call:
Function Name: map_update_elem
Number of calls: 1369
Total time: 21s 182ms 966µs
Maximum: 47ms 937µs
Average: 15ms 473µs
Minimum: 7µs
Profiling shows that nearly all of this time is going to synchronize_rcu(),
via maybe_wait_bpf_programs() in map_update_elem().
The call to synchronize_rcu() is done to ensure that after
bpf_map_update_elem() returns, no BPF programs are still looking at the old
value of the map, per commit 1ae80cf319 ("bpf: wait for running BPF
programs when updating map-in-map").
As discussed on the bpf mailing list, replace synchronize_rcu() with
synchronize_rcu_expedited(). This is 175x faster: it now takes an average
of 88 microseconds per call, for a total of 127 milliseconds in the same
benchmark:
Function Name: map_update_elem
Number of calls: 1439
Total time: 127ms 626µs
Maximum: 445µs
Average: 88µs
Minimum: 10µs
Link: https://lore.kernel.org/bpf/CAH6OuBR=w2kybK6u7aH_35B=Bo1PCukeMZefR=7V4Z2tJNK--Q@mail.gmail.com/
Signed-off-by: Ritesh Oedayrajsingh Varma <ritesh@superluminal.eu>
Link: https://lore.kernel.org/r/20251128000422.20462-1-ritesh@superluminal.eu
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
While previous commits sufficiently address the deadlocks, there are
still scenarios where queueing of waiters in NMIs can exacerbate the
possibility of timeouts.
Consider the case below:
CPU 0
<NMI>
res_spin_lock(A) -> becomes non-head waiter
</NMI>
lock owner in CS or pending waiter spinning
CPU 1
res_spin_lock(A) -> head waiter spinning on owner/pending bits
In such a scenario, the non-head waiter in NMI on CPU 0 will not poll
for deadlocks or timeout since it will simply queue behind previous
waiter (head on CPU 1), and also not enter the trylock fallback since
no rqspinlock queue waiter is active on CPU 0. In such a scenario, the
transaction initiated by the head waiter on CPU 1 will timeout,
signalling the NMI and ending the cyclic dependency, but it will cost
250 ms of time.
Instead, the NMI on CPU 0 could simply check for the presence of an AA
deadlock and only proceed with queueing on success. Add such a check
right before any form of queueing is initiated.
The reason the AA deadlock check is not used in conjunction with
in_nmi() is that a similar case could occur due to a reentrant path
in the owner's critical section, and unconditionally checking for AA
before entering the queueing path avoids expensive timeouts. Non-NMI
reentrancy only happens at controlled points in the slow path (with
specific tracepoints which do not impede the forward progress of a
waiter loop), or in the owner CS, while NMIs can land anywhere.
While this check is only needed for non-head waiter queueing, checking
whether we are head or not is racy without xchg_tail, and after that
point, we are already queued, hence for simplicity we must invoke the
check unconditionally.
Note that a more contrived case could still be constructed by using two
locks, and interrupting the progress of the respective owners by
non-head waiters of the other lock, in an ABBA fashion, which would
still not be covered by the current set of checks and conditions. It
would still lead to a timeout though, and not a deadlock. An ABBA check
cannot happen optimistically before the queueing, since it can be racy,
and needs to be happen continuously during the waiting period, which
would then require an unlinking step for queued NMI/reentrant waiters.
This is beyond the scope of this patch.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20251128232802.1031906-6-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The original trylock fallback was inherited from qspinlock, and then
reused for the reentrant NMIs while the slow path is active. However,
under contention, it is very unlikely for the trylock to succeed in
taking the lock. In addition, a trylock also has no fairness guarantees,
and thus is prone to starvation issues under extreme scenarios.
The original qspinlock had no choice in terms of returning an error the
caller; if the node count was breached, it had to fall back to trylock
to attempt to take the lock. In case of rqspinlock, we do have the
option of returning to the user. Thus, simply attempt the trylock once,
and instead of spinning, return an error in case the lock cannot be
taken.
This ends up significantly reducing the time spent in the trylock
fallback, since we no longer wait for the timeout duration trying to
aimlessly acquire the lock when there's a high-probability that under
contention, it won't be available to us anyway.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20251128232802.1031906-5-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
