The `max3421_hub_control()` function handles USB hub class requests
to the virtual root hub. The `GetPortStatus` case correctly rejects
requests with `index != 1`, since the virtual root hub has only a
single port. However, the `ClearPortFeature` and `SetPortFeature`
cases lack the same check.
Fix this by extending the `index != 1` rejection to both cases,
matching the existing behavior of `GetPortStatus`.
Fixes: 2d53139f31 ("Add support for using a MAX3421E chip as a host driver.")
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Seungjin Bae <eeodqql09@gmail.com>
Link: https://patch.msgid.link/20260518224901.1887013-3-eeodqql09@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `max3421_hub_control()` function handles USB hub class requests
to the virtual root hub. In the `default` branches of both the
`ClearPortFeature` and `SetPortFeature` switch statements, it modifies
`max3421_hcd->port_status` by left shifting 1 by the request's `value`
parameter. However, it does not validate whether this shift will exceed
the width of `port_status`.
So if a malicious userspace task with access to the root hub via
/dev/bus/usb/.../001 issues a USBDEVFS_CONTROL ioctl with `wValue`
greater than or equal to 32, the left shift operation invokes
shift-out-of-bounds undefined behavior. This results in arbitrary
bit corruption of `port_status`, including the normally-immutable
change bits, which can bypass internal state checks and confuse the
hub status.
Fix this by rejecting requests whose `value` exceeds the shift width
before performing the shift.
This issue was found using a KLEE-based symbolic execution tool for
kernel drivers that I'm currently developing.
Fixes: 2d53139f31 ("Add support for using a MAX3421E chip as a host driver.")
Signed-off-by: Seungjin Bae <eeodqql09@gmail.com>
Link: https://patch.msgid.link/20260518224901.1887013-1-eeodqql09@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lockdep detects a possible recursive locking scenario during
ucsi init:
[ 5.418616] ============================================
[ 5.418634] WARNING: possible recursive locking detected
[ 5.418706] --------------------------------------------
[ 5.418725] kworker/4:1/82 is trying to acquire lock:
[ 5.418759] ffff888119a34648 (&con->lock){+.+.}-{3:3}, at: ucsi_init_work+0x1a78/0x2eb0 [typec_ucsi]
[ 5.418801]
but task is already holding lock:
[ 5.418835] ffff888119a34080 (&con->lock){+.+.}-{3:3}, at: ucsi_init_work+0x1a78/0x2eb0 [typec_ucsi]
[ 5.418884]
other info that might help us debug this:
[ 5.418904] Possible unsafe locking scenario:
[ 5.418937] CPU0
[ 5.418956] ----
[ 5.418991] lock(&con->lock);
[ 5.419013] lock(&con->lock);
[ 5.419033]
*** DEADLOCK ***
[ 5.419387] Call Trace:
[ 5.419406] <TASK>
[ 5.419425] dump_stack_lvl+0x61/0xa0
[ 5.419448] print_deadlock_bug+0x4a6/0x650
[ 5.419483] __lock_acquire+0x62b6/0x7f50
[ 5.419507] lock_acquire+0x11b/0x390
[ 5.419654] __mutex_lock+0xbc/0xcd0
[ 5.419741] ucsi_init_work+0x1a78/0x2eb0
[ 5.419785] ? worker_thread+0xf53/0x2bc0
[ 5.419819] worker_thread+0xff4/0x2bc0
[ 5.419842] kthread+0x2a7/0x330
[ 5.419863] ? __pfx_worker_thread+0x10/0x10
[ 5.419896] ? __pfx_kthread+0x10/0x10
[ 5.419916] ret_from_fork+0x38/0x70
[ 5.419936] ? __pfx_kthread+0x10/0x10
[ 5.419969] ret_from_fork_asm+0x1b/0x30
[ 5.419991] </TASK>
[ 5.420009] ---[ end trace 0000000000000000 ]---
The problem is that all connector locks belong to the same
lockdep lock class, so the following loop:
for (i = 0; i < ucsi->cap.num_connectors; i++)
ucsi_register_port(connector[i])
mutex_lock(&connector[i]->lock)
looks like a recursive acquire of the same mutex. Put each connector
lock into a dedicated lock class so that lockdep doesn't see it as a
possible recursion.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260515060042.136083-1-senozhatsky@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some Qualcomm SoCs such as apq8064 and msm8960 require a third "fs"
clock in addition to "iface" and "core", needed to propagate resets
through the controller and wrapper logic. Later SoCs such as msm8974
dropped this requirement and only use two clocks.
Note that the existing apq8064 and msm8960 DTS files currently specify
the "iface" and "core" clocks in reverse order compared to most newer
SoCs DTS, which causes dtbs_check warnings for these older SoCs. The
dependent patch series will fix that clock ordering.
Signed-off-by: Antony Kurniawan Soemardi <linux@smankusors.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260516-qcom-ci-hdrc-clock-fix-v2-1-aaec8d33d0aa@smankusors.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The INGENIC 17EF:6161 touchscreen composite device has a ~55-second
watchdog that resets the USB device if the bulk-IN endpoint on the CDC
data interface goes unread. The existing ALWAYS_POLL_CTRL quirk keeps
the notification endpoint (ctrlurb / EP 0x82) polling continuously, but
that alone is insufficient: the firmware monitors bulk-IN activity, not
just notification-endpoint activity.
Add acm_submit_read_urbs() calls to the two ALWAYS_POLL_CTRL paths that
already restart the ctrlurb:
1. acm_probe(): start bulk reads at probe time alongside the ctrlurb,
so the watchdog is satisfied from first bind without requiring a
userspace process to open /dev/ttyACMn.
2. acm_port_shutdown(): restart bulk reads after port close alongside
the ctrlurb restart, so the watchdog keeps running when the last
TTY user closes the port.
acm_read_bulk_callback() already resubmits each URB unconditionally on
normal completion, so once submitted the reads remain active until an
explicit kill (disconnect, suspend). acm_submit_read_urb() is a no-op
for URBs that are already in flight (read_urbs_free bit clear), so the
existing acm_port_activate() call remains correct and races are avoided.
Tested on Lenovo Yoga Book 9 14IAH10 (83KJ): without this patch the
device resets every ~55 s when no TTY is open; with it the device
remains stable indefinitely.
Signed-off-by: Dave Carey <carvsdriver@gmail.com>
Link: https://patch.msgid.link/20260515141940.751397-1-carvsdriver@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
goku_irq() handles a number of bus events under a single ep0 path.
It already guards the gadget driver suspend/resume callbacks against a
NULL ->driver:
if (dev->gadget.speed != USB_SPEED_UNKNOWN
&& dev->driver
&& dev->driver->resume) {
spin_unlock(&dev->lock);
dev->driver->resume(&dev->gadget);
...
}
but the very next branch unconditionally dereferences dev->driver
when an INT_USBRESET arrives:
if (stat & INT_USBRESET) {
ACK(INT_USBRESET);
INFO(dev, "USB reset done, gadget %s\n",
dev->driver->driver.name);
}
If the controller raises INT_USBRESET before any gadget driver has
been bound (or after one has been unbound), dev->driver is NULL and
the printk dereferences NULL.
smatch flags the inconsistency:
drivers/usb/gadget/udc/goku_udc.c:1618 goku_irq() error:
we previously assumed 'dev->driver' could be null (see line 1607)
Fall back to a placeholder when the gadget driver is not bound.
No functional change while a gadget driver is bound.
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Link: https://patch.msgid.link/20260509110636.19762-1-sozdayvek@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clang warns (or errors with CONFIG_WERROR=y / W=e):
drivers/usb/typec/mux/intel_pmc_mux.c:740:3: error: variable 'num_ports' is uninitialized when used here [-Werror,-Wuninitialized]
740 | num_ports++;
| ^~~~~~~~~
This should have been initialized to zero. Do so now to clean up the
warning and ensure num_ports does not use uninitialized memory.
Fixes: 8bdb0b3830 ("usb: typec: intel_pmc_mux: combine kzalloc + kcalloc")
Reported-by: kernelci.org bot <bot@kernelci.org>
Closes: https://lore.kernel.org/177793914437.2560.9287713196857718000@997d03828cfd/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260506-typec-intel_pmc_mux-fix-uninit-num_ports-v1-1-929b128a32e9@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Each VHCI HC instance registers two USB buses (one HS, one SS).
USB_MAXBUS in drivers/usb/core/hcd.c is hard-coded to 64, giving an
effective maximum of 32 VHCI HC instances (32 * 2 = 64 buses).
The Kconfig range for USBIP_VHCI_NR_HCS currently allows up to 128,
which will cause probe failures for any HC instance beyond the 32nd.
These probe failures trigger the NULL pointer dereference fixed in the
previous commit.
Reduce the upper bound to 32 to reflect the real maximum imposed by
USB_MAXBUS. Note that probe failures can still occur below this limit
if real hardware has already claimed enough USB bus numbers, making
the NULL check fix necessary regardless.
Signed-off-by: Adrian Wowk <dev@adrianwowk.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/20260414010050.158064-3-dev@adrianwowk.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
platform_get_drvdata() can return NULL if a VHCI host controller's
probe failed (e.g. due to USB bus number exhaustion). status_show_vhci()
checked for a NULL pdev but not for a NULL hcd returned by
platform_get_drvdata(). Passing NULL to hcd_to_vhci_hcd() does not
return NULL - it returns a pointer offset of 0x260, causing a NULL
pointer dereference when that value is subsequently dereferenced.
Add a NULL check on hcd before calling hcd_to_vhci_hcd(). Move
status_show_not_ready() above status_show_vhci() to make it callable
from the new error path without a forward declaration.
Signed-off-by: Adrian Wowk <dev@adrianwowk.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/20260414010050.158064-2-dev@adrianwowk.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>From within the SCSI error handler memory allocations must not
trigger IO. Handling errors in UAS and the storage driver may
involve resetting a device. The thread doing the reset itself
relies on VM magic. However, that is insufficient, as resetting
a device involves resuming it. Resumption as well as resetting
involves conrol transfers to the parent of the device to be reset.
That may be a root hub. Hence usbcore must heed the flags passed
to usb_submit_urb() processing control transfers to root hubs.
The problem exist since the storage driver has been merged.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260429094413.181038-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An asynchronous vbus_event_work() keep running when switch the role from
device to host. This affects EHCI host controller initialization.
USBCMD.RUNSTOP bit is set at ehci_run() and cleared by following
vbus_event_work() if bus_event_work() run after ehci_run().
The log below shows what happens:
[ 87.819925] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 87.819963] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
[ 87.955634] ci_hdrc ci_hdrc.0: USB 2.0, controller refused to start: -110
[ 87.955658] ci_hdrc ci_hdrc.0: startup error -110
[ 87.955682] ci_hdrc ci_hdrc.0: USB bus 1 deregistered
The problem is that the chipidea UDC driver call usb_udc_vbus_handler() to
pull down data line but it don't wait for completion before host controller
starts running.
Now UDC core can properly delete usb gadget device and make sure that vbus
work is cancelled or completed after usb_del_gadget_udc() is returned. But
the udc.c only call usb_del_gadget_udc() in ci_hdrc_gadget_destroy(). To
avoid above issue, add/remove the gadget device dynamically during USB role
switching.
To support dynamic gadget add/remove, do below steps:
- clear ci->gadget and ci->ci_hw_ep at initialization.
- assign udc_[start|stop]() to rdrv->[start|stop] and properly merge the
operations in udc_id_switch_for_[device|host]() to udc_[start|stop]()
Adjust the order ci_handle_vbus_change() and ci_role_start() to avoid NULL
pointer reference since ci_hdrc_gadget_init() doesn't add gadget anymore.
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260427075653.3611180-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The VBUS interrupt is configured in multiple places, add a helper function
ci_udc_enable_vbus_irq() to simplify the code.
Acked-by: Peter Chen <peter.chen@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260427075653.3611180-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the deprecated .txt binding for richtek,rt1711h. It was
superseded by the YAML schema added in commit a72095ed8e
("dt-bindings usb: typec: rt1711h: Add binding for Richtek RT1711H").
Signed-off-by: Akash Sukhavasi <akash.sukhavasi@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260520170451.2403-1-akash.sukhavasi@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled array, only its representation in
source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Vladimir Zapolskiy <vz@kernel.org>
Link: https://patch.msgid.link/20260519161300.1598095-2-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
While touching all these arrays, unify usage of whitespace in the list
terminator.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Richard Leitner <richard.leitner@linux.dev>
Link: https://patch.msgid.link/20260518135536.781168-2-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
While touching all these arrays, unify usage of whitespace in the list
terminator.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260518110142.637215-2-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Translate .../usb/index.rst into Chinese and update subsystem-apis.rst
Update the translation through commit a592a36e49
("Documentation: use a source-read extension for the index link boilerplate")
Reviewed-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Signed-off-by: Kefan Bai <baikefan@leap-io-kernel.com>
Link: https://patch.msgid.link/27f8c02f2d78b37dd5d640fbafaa60d0f0ea9c95.1779355170.git.baikefan@leap-io-kernel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add an auxiliary-bus hwmon driver for the temperature sensor exposed by
AMD Promontory 21 (PROM21) xHCI PCI functions. The driver binds to the
"hwmon" auxiliary device published by the PROM21 xHCI PCI glue and
exposes the sensor as temp1_input under the prom21_xhci hwmon device.
The sensor is accessed through a PROM21 vendor index/data register pair
in the xHCI PCI MMIO BAR. The driver consumes parent-provided MMIO data
from the PROM21 PCI glue instead of inspecting the parent PCI driver's
drvdata. The read path restores the previous vendor index value after
sampling and does not runtime-resume the parent PCI device; reads from a
suspended parent return -ENODATA.
Document the supported device, register access, runtime PM behavior, and
sysfs lookup method. The documentation also records the observation
method used to identify the register pair and derive the conversion
formula.
Assisted-by: Codex:gpt-5.5
Signed-off-by: Jihong Min <hurryman2212@gmail.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Yaroslav Isakov <yaroslav.isakov@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20260519000732.2334711-3-hurryman2212@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
AMD Promontory 21 (PROM21) xHCI PCI functions use the common xhci-pci
core for USB operation, but also expose controller-specific sensor data.
Add a small PROM21 PCI glue driver for AMD 1022:43fc and 1022:43fd
controllers.
The glue delegates USB host operation to the common xhci-pci core and
publishes a "hwmon" auxiliary device with parent-provided MMIO data.
Auxiliary device creation failure is logged but does not fail the xHCI
probe.
Make the PROM21 glue a hidden Kconfig tristate driven by the user-visible
SENSORS_PROM21_XHCI option. If sensor support is disabled, generic
xhci-pci binds PROM21 controllers normally. If sensor support is enabled,
the glue follows USB_XHCI_PCI.
This keeps the auxiliary device available for a modular sensor driver while
avoiding a built-in xhci-pci core handing PROM21 controllers to a glue
driver that is only available as a module during initramfs.
Assisted-by: Codex:gpt-5.5
Signed-off-by: Jihong Min <hurryman2212@gmail.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Yaroslav Isakov <yaroslav.isakov@gmail.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20260519000732.2334711-2-hurryman2212@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert dev_info() to dev_dbg().
Per 'Documentation/process/coding-style.rst':
13) Printing kernel messages
... When drivers are working properly they are quiet,
so prefer to use dev_dbg/pr_debug unless something is wrong.
While in there, correct the verb form and add 'with' for clarity.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/all/2026051628-squatter-stature-c0e0@gregkh/
Signed-off-by: Mauricio Faria de Oliveira <mfo@igalia.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20260520-ueagle-atm-cleanup-v1-1-010c8bc7b214@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use FIELD_MODIFY() to remove open-coded bit manipulation.
No functional change intended.
Signed-off-by: Hans Zhang <18255117159@163.com>
Link: https://patch.msgid.link/20260430163919.47372-7-18255117159@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use FIELD_MODIFY() to remove open-coded bit manipulation.
No functional change intended.
Signed-off-by: Hans Zhang <18255117159@163.com>
Link: https://patch.msgid.link/20260430163919.47372-6-18255117159@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use FIELD_MODIFY() to remove open-coded bit manipulation.
No functional change intended.
Signed-off-by: Hans Zhang <18255117159@163.com>
Link: https://patch.msgid.link/20260430163919.47372-5-18255117159@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use FIELD_MODIFY() to remove open-coded bit manipulation.
No functional change intended.
Signed-off-by: Hans Zhang <18255117159@163.com>
Link: https://patch.msgid.link/20260430163919.47372-4-18255117159@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use FIELD_MODIFY() to remove open-coded bit manipulation.
No functional change intended.
Signed-off-by: Hans Zhang <18255117159@163.com>
Link: https://patch.msgid.link/20260430163919.47372-3-18255117159@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use FIELD_MODIFY() to remove open-coded bit manipulation.
No functional change intended.
Signed-off-by: Hans Zhang <18255117159@163.com>
Link: https://patch.msgid.link/20260430163919.47372-2-18255117159@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The USB dwc3 core on Rockchip RK3528 is the same as the one already
described by the generic snps,dwc3 schema.
Add the compatible for the Rockchip RK3528 variant.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260505164509.3254707-1-heiko@sntech.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kernel-doc comment for dwc3_alloc_event_buffers states that the
function "Allocates @num event buffers", but the function does not have
a @num parameter and only allocates a single event buffer.
Remove the misleading "@num" reference from the brief description to
accurately reflect the function's behavior.
Signed-off-by: Shuping Bu <bushuping007@163.com>
Link: https://patch.msgid.link/20260520055023.2415635-1-bushuping007@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmoA87keHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGsnAIAJENovWOPJnq6XOM
GcnwSFG+xsv5kfSXU9+ZgP2WnoHJGoWCon2T69+dyVrthmMxFcPub1UM+VI0M+LP
Eo894JhbAlpej4Z0f6I4L6eE9RMq2vc3UW3ga1WK6R9IYJ3WE1kEur64zJJoBvX1
SPj4oxpI/S02KxLT8F2Sq5PVS4lvaDwK/N2mTB5JNjZE24iUMYc/4nPFNFpVKhgb
qfpMOk4VGjfgRexVksskm8pVO6FAWXUMQTGUUYSpzv5f2avGAyP8o+m3dHIs366+
Y/xVLADTtW7z4pu3eTw5hZLhbTekElFfLTsSPqWwqCiu0zA5s3HjRHMo3xbhHkwT
0zXS2H0=
=j7EH
-----END PGP SIGNATURE-----
Merge tag 'v7.1-rc3' into usb-next
We need the USB fixes in here as well to test and work off of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DATA-packet handler in rxrpc_input_call_event() and the RESPONSE
handler in rxrpc_verify_response() copy the skb to a linear one before
calling into the security ops only when skb_cloned() is true. An skb
that is not cloned but still carries externally-owned paged fragments
(e.g. SKBFL_SHARED_FRAG set by splice() into a UDP socket via
__ip_append_data, or a chained skb_has_frag_list()) falls through to
the in-place decryption path, which binds the frag pages directly into
the AEAD/skcipher SGL via skb_to_sgvec().
Extend the gate to also unshare when skb_has_frag_list() or
skb_has_shared_frag() is true. This catches the splice-loopback vector
and other externally-shared frag sources while preserving the
zero-copy fast path for skbs whose frags are kernel-private (e.g. NIC
page_pool RX, GRO). The OOM/trace handling already in place is reused.
Fixes: d0d5c0cd1e ("rxrpc: Use skb_unshare() rather than skb_cow_data()")
Cc: stable@vger.kernel.org
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Mark the DDR bus clk critical in the SpaceMiT driver so that
boot doesn't fail
- Fix boot on Mobile EyeQ by creating the auxiliary device for
the ethernet PHY
- Plug an OF node leak in Rockchip rk808 clk driver
-----BEGIN PGP SIGNATURE-----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=yAV8
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk driver fixes from Stephen Boyd:
- Mark the DDR bus clk critical in the SpaceMiT driver so that
boot doesn't fail
- Fix boot on Mobile EyeQ by creating the auxiliary device for
the ethernet PHY
- Plug an OF node leak in Rockchip rk808 clk driver
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: rk808: fix OF node reference imbalance
MAINTAINERS: add myself as a reviewer for the clk subsystem
reset: eyeq: drop device_set_of_node_from_dev() done by parent
clk: eyeq: add EyeQ5 children auxiliary device for generic PHYs
clk: eyeq: use the auxiliary device creation helper
clk: spacemit: k3: mark top_dclk as CLK_IS_CRITICAL
BPF_MAP_TYPE_ARENA accepts BPF_PSEUDO_MAP_VALUE offsets at exactly
the end of the arena mapping (off == arena_size). The boundary check
in arena_map_direct_value_addr() uses `>` instead of `>=`, which
incorrectly allows a one-past-end pointer to be accepted.
Change the condition to `>=` to correctly reject offsets that fall
outside the valid arena user_vm range.
Fixes: 317460317a ("bpf: Introduce bpf_arena.")
Signed-off-by: Junyoung Jang <graypanda.inzag@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260426172505.1947915-1-graypanda.inzag@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
XSKMAP entries are used as redirect targets for incoming XDP frames.
A TX-only AF_XDP socket lacks an Rx ring and cannot handle redirected
traffic, but xsk_map_update_elem() currently allows such sockets to
be inserted into the map.
Redirecting packets to such a socket on the veth generic-XDP path
causes a kernel crash in xsk_generic_rcv().
This became possible after xsk_is_setup_for_bpf_map() was removed from
the XSKMAP update path, which allowed bound TX-only sockets to be
inserted into the map.
Reject TX-only sockets during XSKMAP updates to avoid the crash.
They remain fully operational for pure Tx purposes outside XSKMAP.
Fixes: 968be23cea ("xsk: Fix possible segfault at xskmap entry insertion")
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Yifan Wu <yifanwucs@gmail.com>
Signed-off-by: Linpu Yu <linpu5433@gmail.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20260508144344.694-1-linpu5433@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Because subprog 0, the main subprog, is considered a global function,
we end up running the arg-tracking dataflow analysis twice on it. That
results in slightly longer verification but mostly in more verbose
verifier logs. This patch fixes it by keeping only the iteration over
global subprogs.
When running over all of Cilium's programs with BPF_LOG_LEVEL2, this
reduces verbosity by ~20% on average.
Fixes: bf0c571f7f ("bpf: introduce forward arg-tracking dataflow analysis")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/e4d7b53d4963ef520541a782f5fc8108a168877c.1778176504.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fix a regression in overlayfs caused by an fsverity API change
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaf97zhQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK+PtAQDzevIJ21gYwhimSRxpbB/eDRQO3gD2
wz4bz2lXZiCjIwEA8rktrlFgrLeqo1W252YXGpvlczf5qgupos3t4Hm8LAk=
=WsMl
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux
Pull fsverity fix from Eric Biggers:
"Fix a regression in overlayfs caused by an fsverity API change"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
ovl: fix verity lazy-load guard broken by fsverity_active() semantic change
Here are two small staging driver fixes for 7.1-rc3. They are:
- vme_user root device leak fix
- NULL dereference bugfix in the rtl8723bs driver
Both of these have been in linux-next all this week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaf7ksA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk3cACgjbF86RGquBMOmCvW0y05gLGXACsAoM4cOfQd
Wel+rDTKUoa6FvreddHi
=vHTv
-----END PGP SIGNATURE-----
Merge tag 'staging-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are two small staging driver fixes for 7.1-rc3. They are:
- vme_user root device leak fix
- NULL dereference bugfix in the rtl8723bs driver
Both of these have been in linux-next all this week with no reported
issues"
* tag 'staging-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: os_dep: avoid NULL pointer dereference in rtw_cbuf_alloc
staging: vme_user: fix root device leak on init failure
