usb: xhci-pci: add AMD Promontory 21 PCI glue

AMD Promontory 21 (PROM21) xHCI PCI functions use the common xhci-pci
core for USB operation, but also expose controller-specific sensor data.
Add a small PROM21 PCI glue driver for AMD 1022:43fc and 1022:43fd
controllers.

The glue delegates USB host operation to the common xhci-pci core and
publishes a "hwmon" auxiliary device with parent-provided MMIO data.
Auxiliary device creation failure is logged but does not fail the xHCI
probe.

Make the PROM21 glue a hidden Kconfig tristate driven by the user-visible
SENSORS_PROM21_XHCI option. If sensor support is disabled, generic
xhci-pci binds PROM21 controllers normally. If sensor support is enabled,
the glue follows USB_XHCI_PCI.

This keeps the auxiliary device available for a modular sensor driver while
avoiding a built-in xhci-pci core handing PROM21 controllers to a glue
driver that is only available as a module during initramfs.

Assisted-by: Codex:gpt-5.5
Signed-off-by: Jihong Min <hurryman2212@gmail.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Yaroslav Isakov <yaroslav.isakov@gmail.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20260519000732.2334711-2-hurryman2212@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/host/Kconfig

@@ -42,6 +42,12 @@ config USB_XHCI_PCI
 	depends on USB_PCI
 	default y
 
+config USB_XHCI_PCI_PROM21
+	tristate
+	depends on USB_XHCI_PCI
+	default USB_XHCI_PCI if SENSORS_PROM21_XHCI != n
+	select AUXILIARY_BUS
+
 config USB_XHCI_PCI_RENESAS
 	tristate "Support for additional Renesas xHCI controller with firmware"
 	depends on USB_XHCI_PCI

drivers/usb/host/Makefile

@@ -71,6 +71,7 @@ obj-$(CONFIG_USB_UHCI_HCD)	+= uhci-hcd.o
 obj-$(CONFIG_USB_FHCI_HCD)	+= fhci.o
 obj-$(CONFIG_USB_XHCI_HCD)	+= xhci-hcd.o
 obj-$(CONFIG_USB_XHCI_PCI)	+= xhci-pci.o
+obj-$(CONFIG_USB_XHCI_PCI_PROM21)	+= xhci-pci-prom21.o
 obj-$(CONFIG_USB_XHCI_PCI_RENESAS)	+= xhci-pci-renesas.o
 obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o
 obj-$(CONFIG_USB_XHCI_HISTB)	+= xhci-histb.o

drivers/usb/host/xhci-pci-prom21.c

@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AMD Promontory 21 xHCI host controller PCI Bus Glue.
+ *
+ * This does not add any PROM21-specific USB or xHCI operation. It exists only
+ * to publish an auxiliary device for integrated temperature sensor support.
+ *
+ * Copyright (C) 2026 Jihong Min <hurryman2212@gmail.com>
+ */
+
+#include <linux/auxiliary_bus.h>
+#include <linux/device/devres.h>
+#include <linux/errno.h>
+#include <linux/idr.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/platform_data/usb-xhci-prom21.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "xhci-pci.h"
+
+struct prom21_xhci_auxdev {
+	struct auxiliary_device *auxdev;
+	struct prom21_xhci_pdata pdata;
+	int id;
+};
+
+static DEFINE_IDA(prom21_xhci_auxdev_ida);
+
+static void prom21_xhci_auxdev_release(struct device *dev, void *res)
+{
+	struct prom21_xhci_auxdev *prom21_auxdev = res;
+
+	auxiliary_device_destroy(prom21_auxdev->auxdev);
+	ida_free(&prom21_xhci_auxdev_ida, prom21_auxdev->id);
+}
+
+static int prom21_xhci_create_auxdev(struct pci_dev *pdev)
+{
+	struct prom21_xhci_auxdev *prom21_auxdev;
+	struct usb_hcd *hcd = pci_get_drvdata(pdev);
+	int ret;
+
+	prom21_auxdev = devres_alloc(prom21_xhci_auxdev_release,
+				     sizeof(*prom21_auxdev), GFP_KERNEL);
+	if (!prom21_auxdev)
+		return -ENOMEM;
+
+	prom21_auxdev->pdata.pdev = pdev;
+	prom21_auxdev->pdata.regs = hcd->regs;
+	prom21_auxdev->pdata.rsrc_len = hcd->rsrc_len;
+
+	prom21_auxdev->id = ida_alloc(&prom21_xhci_auxdev_ida, GFP_KERNEL);
+	if (prom21_auxdev->id < 0) {
+		ret = prom21_auxdev->id;
+		goto err_free_devres;
+	}
+
+	prom21_auxdev->auxdev = auxiliary_device_create(&pdev->dev,
+							KBUILD_MODNAME, "hwmon",
+							&prom21_auxdev->pdata,
+							prom21_auxdev->id);
+	if (!prom21_auxdev->auxdev) {
+		ret = -ENOMEM;
+		goto err_free_ida;
+	}
+
+	devres_add(&pdev->dev, prom21_auxdev);
+	return 0;
+
+err_free_ida:
+	ida_free(&prom21_xhci_auxdev_ida, prom21_auxdev->id);
+err_free_devres:
+	devres_free(prom21_auxdev);
+	return ret;
+}
+
+static void prom21_xhci_destroy_auxdev(struct pci_dev *pdev)
+{
+	devres_release(&pdev->dev, prom21_xhci_auxdev_release, NULL, NULL);
+}
+
+static int prom21_xhci_probe(struct pci_dev *dev,
+			     const struct pci_device_id *id)
+{
+	int retval;
+
+	retval = xhci_pci_common_probe(dev, id);
+	if (retval)
+		return retval;
+
+	retval = prom21_xhci_create_auxdev(dev);
+	if (retval) {
+		/*
+		 * The auxiliary device only provides optional temperature sensor
+		 * support. Keep the xHCI controller usable if it fails.
+		 */
+		dev_err(&dev->dev,
+			"failed to create PROM21 hwmon auxiliary device: %d\n",
+			retval);
+	}
+
+	return 0;
+}
+
+static void prom21_xhci_remove(struct pci_dev *dev)
+{
+	prom21_xhci_destroy_auxdev(dev);
+	xhci_pci_remove(dev);
+}
+
+static const struct pci_device_id pci_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_PROM21_XHCI_43FC) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_PROM21_XHCI_43FD) },
+	{ /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+static struct pci_driver prom21_xhci_driver = {
+	.name = "xhci-pci-prom21",
+	.id_table = pci_ids,
+
+	.probe = prom21_xhci_probe,
+	.remove = prom21_xhci_remove,
+
+	.shutdown = usb_hcd_pci_shutdown,
+	.driver = {
+		.pm = pm_ptr(&usb_hcd_pci_pm_ops),
+	},
+};
+module_pci_driver(prom21_xhci_driver);
+
+MODULE_AUTHOR("Jihong Min <hurryman2212@gmail.com>");
+MODULE_DESCRIPTION("AMD Promontory 21 xHCI PCI Host Controller Driver");
+MODULE_IMPORT_NS("xhci");
+MODULE_LICENSE("GPL");

drivers/usb/host/xhci-pci.c

@@ -696,12 +696,23 @@ static const struct pci_device_id pci_ids_renesas[] = {
 	{ /* end: all zeroes */ }
 };
 
+/* handled by xhci-pci-prom21 if enabled */
+static const struct pci_device_id pci_ids_prom21[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_PROM21_XHCI_43FC) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_PROM21_XHCI_43FD) },
+	{ /* end: all zeroes */ }
+};
+
 static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	if (IS_ENABLED(CONFIG_USB_XHCI_PCI_RENESAS) &&
 			pci_match_id(pci_ids_renesas, dev))
 		return -ENODEV;
 
+	if (IS_ENABLED(CONFIG_USB_XHCI_PCI_PROM21) &&
+	    pci_match_id(pci_ids_prom21, dev))
+		return -ENODEV;
+
 	return xhci_pci_common_probe(dev, id);
 }
 

drivers/usb/host/xhci-pci.h

@@ -4,6 +4,9 @@
 #ifndef XHCI_PCI_H
 #define XHCI_PCI_H
 
+#define PCI_DEVICE_ID_AMD_PROM21_XHCI_43FC	0x43fc
+#define PCI_DEVICE_ID_AMD_PROM21_XHCI_43FD	0x43fd
+
 int xhci_pci_common_probe(struct pci_dev *dev, const struct pci_device_id *id);
 void xhci_pci_remove(struct pci_dev *dev);
 

include/linux/platform_data/usb-xhci-prom21.h

@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * AMD Promontory 21 xHCI auxiliary device platform data.
+ *
+ * Copyright (C) 2026 Jihong Min <hurryman2212@gmail.com>
+ */
+
+#ifndef _LINUX_PLATFORM_DATA_USB_XHCI_PROM21_H
+#define _LINUX_PLATFORM_DATA_USB_XHCI_PROM21_H
+
+#include <linux/compiler_types.h>
+#include <linux/types.h>
+
+struct pci_dev;
+
+struct prom21_xhci_pdata {
+	struct pci_dev *pdev;
+	void __iomem *regs;
+	resource_size_t rsrc_len;
+};
+
+#endif