The return code of a non void function should not be ignored. In cases
where we do not care, the code needs to suppress it.
Signed-off-by: Andrew Martin <andrew.martin@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add get ras capability for psp 15.0.8.
v2:Remove APU type check and IP version check.
Signed-off-by: Jinzhou Su <jinzhou.su@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The number of default features could be different from the actual width
of the bitmap. Use a different definition for it. Also increase the max
width of bitmap to 128.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use smu_feature_bits instead of uint64_t pointer and operate on
feature bits.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Feature bits are not necessarily restricted to 64-bits. Use
smu_feature_bits data structure to represent feature mask for checking
DPM status.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 7294863a6f.
This commit was erroneously applied again after commit 0ab5d711ec
("drm/amd: Refactor `amdgpu_aspm` to be evaluated per device")
removed it, leading to very hard to debug crashes, when used with a system with two
AMD GPUs of which only one supports ASPM.
Link: https://lore.kernel.org/linux-acpi/20251006120944.7880-1-spasswolf@web.de/
Link: https://github.com/acpica/acpica/issues/1060
Fixes: 0ab5d711ec ("drm/amd: Refactor `amdgpu_aspm` to be evaluated per device")
Signed-off-by: Bert Karwatzki <spasswolf@web.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Migrate DCCG register access from hwseq to dccg component.
- Add lpddr5 handling to dml2.1
- Correct external pr fsm control
- Make DCN35 OTG disable w/a reusable
- Make DSC FGCG a DSC block level function
- Make some DCN35 DCCG symbols reusable
- Fix writeback on DCN 3.2+
- Fix IGT link training failure on Replay panel
- Fix system resume lag issue
- Add oem panel config for new features
- Fix IGT ILR link training failure on Replay panel
- Fix a NULL pointer dereference in dcn20_hwseq.c
- Add Gfx Base Case For Linear Tiling Handling
- Migrate DIO registers access from hwseq to dio component.
- Match expected data types
- Add CRC 32-bit mode support for DCN3.6+
- Init DMUB DPIA Only for APU
- DIO memory leak fix.
- Add Handling for gfxversion DcGfxBase
Acked-by: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new enum definition for panel replay ml activity options.
Acked-by: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is no way to set tiling in dml in the case that gfxversion is
DcGfxBase.
[How]
Where tiling is updated based on Gfx, add case for DcGfxBase and set
tiling to dml2_sw_linear.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Nicholas Carbones <ncarbone@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Allocated memory for dcn10_dio but not freed in dcn401_resource.
[how]
Add kfree for it in dcn401_resource.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Bhuvanachandra Pinninti <bpinnint@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
1. There is no need to init dpia in dgpu
2. Add additional dpia flags
a. dpia hpd dynamic control
b. consolidated dpia link training to dp
c. dynamic bw allocation support
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN 3.6+ hardware supports CRC-32 polynomial in addition to the
legacy CRC-16. Enable 32-bit CRC values per color component for
improvement of precision in display validation.
[How]
When userspace sets crc_poly_mode (0=CRC-16, 1=CRC-32) via the debugfs
interface, the value is stored in dm_irq_params.crc_poly_mode. When CRC
source configuration triggers amdgpu_dm_crtc_configure_crc_source(),
crc_poly_mode is retrieved from dm_irq_params and passed to
dc_stream_configure_crc().
In the DC layer, dc_stream_configure_crc() sets crc_poly_mode into the
crc_params structure and passes it to optc35_configure_crc(). If the
hardware supports the OTG_CRC_POLY_SEL register, the register is
programmed to select CRC-16 or CRC-32 polynomial.
When reading CRC values, optc35_get_crc() checks whether CRC32 register
masks are available. If present, it reads 32-bit CRC values from
OTG_CRC0/1_DATA_R32/G32/B32 registers; otherwise, it falls back
to reading 16-bit CRC values from legacy OTG_CRC0/1_DATA_RG/B
registers.
Reviewed-by: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Data types should match what is expected.
Update/cast data accordingly.
Also change ASSERT to use DML_ASSERT instead
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Zheng Austin <Austin.Zheng@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Direct DIO registers access in hwseq layer was creating register conflicts.
[how]
Migrated DIO registers from hwseq to dio component.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Signed-off-by: Bhuvanachandra Pinninti <bpinnint@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
commit f81cd79311 ("drm/amd/amdgpu: Fix MES init sequence") caused
a dependency on new enough MES firmware to use amdgpu. This was fixed
on most gfx11 and gfx12 hardware with commit 0180e0a5dd
("drm/amdgpu/mes: add compatibility checks for set_hw_resource_1"), but
this left out that GC 11.0.4 had breakage at MES 0x51.
Bump the requirement to 0x52 instead.
Reported-by: danijel@nausys.com
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4576
Fixes: f81cd79311 ("drm/amd/amdgpu: Fix MES init sequence")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Post-driver cases always use linear tiling yet there is no dedicated
Gfx handling for this condition.
[How]
Add DcGfxBase/DalGfxBase to gfx version enums and set tiling to linear
when it is used. Also, enforce the use of proper tiling format as tiling
information is used.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Nicholas Carbones <ncarbone@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
hws->funcs.dccg_init is accessed without checking if it is NULL, which
may lead to a NULL pointer dereference.
[how]
Add a NULL check before calling dccg_init.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Fix the IGT ilr_link-training-configs test failure
by directly using the supported link rates from DPCD.
Reviewed-by: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
IGT link-training-configs test fails to set the link rate on Replay panels
because some link rate types are not supported in debugfs. As a result,
debugfs treats these link rates as invalid, causing the IGT test to fail.
[How]
Add missing link rate types to resolve this issue.
Reviewed-by: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
1. Set no scaling for writeback as they are hardcoded in DCN3.2+.
2. Set no fast plane update for writeback commits.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In order to have few DCN35 functions be leveraged for future ASIC
implementations. Expose them to the dcn35_dccg.h header.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
FGCG shouldn't be called at the DC resource level as part of DSC
creation because dc_create is intended for SW init, not HW init, and
register access is not guaranteed to work at this phase.
[How]
Add a set_fgcg function at the DSC interface level.
Existing ASIC can continue using the function in DC resource to retain
current compatibility but further development should favor calling
the function pointer during init_hw (if it exists).
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The logic for the OTG disable workaround is particularly complex and
should be leveraged going forward instead of reimplementing and
maintaining it for multiple ASIC.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
To correctly control external panel replay fsm.
[HOW]
1. External panel replay is 1-A option only now.
2. Update cursor update and dirty rects commands for external
panel replay support.
3. Add external panel replay support flag in dc.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Memory bandwidth calculations work differently than for ddr.
Add lpddr5 handling.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Direct DCCG register access in hwseq layer was creating register conflicts.
[how]
Migrated DCCG registers from hwseq to dccg component.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Bhuvanachandra Pinninti <bpinnint@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a full memory barrier after clearing no_hw_access in
amdgpu_device_mode1_reset() so subsequent PCI state restore
access cannot observe stale state on other CPUs.
Fixes: 7edb503fe4 ("drm/amd/pm: Disable MMIO access during SMU Mode 1 reset")
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
. Fix a regression where vidi_connection_ioctl() used the wrong device
to look up the vidi context. It stores the vidi device in exynos_drm_private
and uses it in ioctl(), preventing invalid pointer access and related bugs.
. Fix a security regression where vidi_connection_ioctl() directly dereferenced
a user pointer for EDID data. It copies EDID from user space
with copy_from_user() into kernel memory before use, preventing arbitrary
kernel memory access.
. Fix a concurrency regression where vidi_context members related
to EDID memory were accessed without locking. It protects alloc/free and
state updates with ctx->lock, preventing race conditions and use-after-free bugs.
-----BEGIN PGP SIGNATURE-----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=xWsw
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Fix three regressions
. Fix a regression where vidi_connection_ioctl() used the wrong device
to look up the vidi context. It stores the vidi device in exynos_drm_private
and uses it in ioctl(), preventing invalid pointer access and related bugs.
. Fix a security regression where vidi_connection_ioctl() directly dereferenced
a user pointer for EDID data. It copies EDID from user space
with copy_from_user() into kernel memory before use, preventing arbitrary
kernel memory access.
. Fix a concurrency regression where vidi_context members related
to EDID memory were accessed without locking. It protects alloc/free and
state updates with ctx->lock, preventing race conditions and use-after-free bugs.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patch.msgid.link/20260201143939.27074-1-inki.dae@samsung.com
Exynos Virtual Display driver performs memory alloc/free operations
without lock protection, which easily causes concurrency problem.
For example, use-after-free can occur in race scenario like this:
```
CPU0 CPU1 CPU2
---- ---- ----
vidi_connection_ioctl()
if (vidi->connection) // true
drm_edid = drm_edid_alloc(); // alloc drm_edid
...
ctx->raw_edid = drm_edid;
...
drm_mode_getconnector()
drm_helper_probe_single_connector_modes()
vidi_get_modes()
if (ctx->raw_edid) // true
drm_edid_dup(ctx->raw_edid);
if (!drm_edid) // false
...
vidi_connection_ioctl()
if (vidi->connection) // false
drm_edid_free(ctx->raw_edid); // free drm_edid
...
drm_edid_alloc(drm_edid->edid)
kmemdup(edid); // UAF!!
...
```
To prevent these vulns, at least in vidi_context, member variables related
to memory alloc/free should be protected with ctx->lock.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
In vidi_connection_ioctl(), vidi->edid(user pointer) is directly
dereferenced in the kernel.
This allows arbitrary kernel memory access from the user space, so instead
of directly accessing the user pointer in the kernel, we should modify it
to copy edid to kernel memory using copy_from_user() and use it.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
vidi_connection_ioctl() retrieves the driver_data from drm_dev->dev to
obtain a struct vidi_context pointer. However, drm_dev->dev is the
exynos-drm master device, and the driver_data contained therein is not
the vidi component device, but a completely different device.
This can lead to various bugs, ranging from null pointer dereferences and
garbage value accesses to, in unlucky cases, out-of-bounds errors,
use-after-free errors, and more.
To resolve this issue, we need to store/delete the vidi device pointer in
exynos_drm_private->vidi_dev during bind/unbind, and then read this
exynos_drm_private->vidi_dev within ioctl() to obtain the correct
struct vidi_context pointer.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
refcounting conversions, and one for the bridge connector following the
HDMI audio reworks.
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCaXshIgAKCRAnX84Zoj2+
diDDAXwJM6Hh0WJL3timIT9gfktjx+lAYPK2hOFhxAvw0rjg2LeDnS40U5X5222j
8fP781YBf0jpvWD2K8QXRIZTCG5JSUYiYnz9aM61x7wJ9k3zpMqLCjPsy8jsm+iS
/O2caHj0bw==
=z19u
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2026-01-29' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
Two fixes for NULL pointer dereference in imx8 following the bridge
refcounting conversions, and one for the bridge connector following the
HDMI audio reworks.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260129-efficient-jerboa-of-ecstasy-822832@houat
Kernel gfx queues do not need to be reinitialized or
remapped after a reset. Align with gfx11.
v2: preserve init and remap for MMIO case.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kernel gfx queues do not need to be reinitialized or
remapped after a reset. This fixes queue reset failures
on APUs.
v2: preserve init and remap for MMIO case.
Fixes: b3e9bfd866 ("drm/amdgpu/gfx11: add ring reset callbacks")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4789
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
wptr is a 64 bit value and we need to update the
full value, not just 32 bits. Align with what we
already do for KCQs.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
wptr is a 64 bit value and we need to update the
full value, not just 32 bits. Align with what we
already do for KCQs.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
wptr is a 64 bit value and we need to update the
full value, not just 32 bits. Align with what we
already do for KCQs.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MES is enabled by default from gfx11+, use AMDGPU_MQD_SIZE_ALIGN
unconditionally for gfx11+.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make allocate_mqd consistent with other callbacks.
Prepare for next patch to use mqd_manager->mqd_size.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use AMDGPU_MQD_SIZE_ALIGN for both kernel and user queue.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of returning feature bit mask of allowed features, initialize
the allowed features in the callback implementation itself.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove commented and redundant logic in get_allowed_feature_mask
implementation.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of using bitmap operations, add wrapper interface functions to
operate on smu features.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a bitmap struct to represent smu feature bits and functions to set/clear features.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MES FW uses address(mqd_addr + sizeof(struct mqd) + 3*sizeof(uint32_t))
as fence address and writes a 32 bit fence value to this address. Driver
needs to allocate some extra memory(at least 4 DWs) in addition to
sizeof(struct mqd) as mqd memory(limited to gfx/compute/sdma queue).
For gfx11/12, sizeof(struct mqd) < PAGE_SIZE, KGD allocates mqd memory with
PAGE_SIZE aligned works. For gfx12.1, sizeof(struct mqd) == PAGE_SIZE,
it doesn't work.
KFD mqd manager hardcodes mqd size to PAGE_SIZE/MQD_SIZE across different
IP versions to solve this issue.
To avoid hardcoding in differnet places and across different IP versions.
Let's use AMDGPU_MQD_SIZE_ALIGN instead. It is used in two places.
1. mqd memory alloction
2. mqd stride handling for multi xcc config
v2: Use AMDGPU_GPU_PAGE_ALIGN. (Mukul)
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: David Belanger <david.belanger@amd.com> (v1)
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
