Enable the CCI1 bus and add support for the Microchip EMC2305 fan
controller on the Monaco Arduino Monza board. The controller is
virtually implemented by the onboard MCU.
Add a new active trip point to the cpuss0 thermal zone and
associate it with onboard fan cooling. The CPU subsystem sensor is
used as the thermal reference until support for a more appropriate
onboard/skin sensor becomes available (via spmi-adc5-gen3).
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260609091206.522331-1-loic.poulain@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the blsp2_spi5 SPI controller node together with its default and sleep
pinctrl states.
Signed-off-by: Christopher Obbard <christopher.obbard@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260508-wip-obbardc-msm8996-blsp2_spi4-v2-1-8b81a95b1ed7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the CAMCC block for x1e80100. The x1e80100 CAMCC block is an iteration
of previous CAMCC blocks with the exception of having two required
power-domains not just one. And update the compatible for camcc and
videocc nodes on Purwa to match with their respective Purwa (X1P42100)
specific drivers.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260507-purwa-videocc-camcc-v5-6-fc3af4130282@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add documentation for the Last Level Cache Controller (LLCC) bindings
for Qualcomm Maili SoC which is fully compatible with the one found on
Qualcomm Hawi.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260604-maili-llcc-v2-1-dd24f05bc197@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Qualcomm PCIe binding deprecates perst-gpios and wake-gpios
on the host bridge and expects board reset and wake GPIOs to be
described on the root port. PERST# is described there as
reset-gpios.
Move the PCIe PHY references in kodiak.dtsi to the PCIe0 and PCIe1
root port nodes, and move the board-specific PCIe reset and wake
GPIOs in the Kodiak DTs to the corresponding root ports.
Keep the PHY and GPIO resources on the same root port nodes so the
Qualcomm PCIe driver can parse the root port binding instead of
falling back to the legacy host bridge GPIO parsing.
Signed-off-by: Hongyang Zhao <hongyang.zhao@thundersoft.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260607-rubikpi-bugfix-next-20260605-v2-1-7bf229978bcd@thundersoft.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Firmware supports both CPU power collapse (gold_cpu_sleep_0) and
CPU PLL/rail power collapse (gold_rail_cpu_sleep_0) idle states.
However, CPU power collapse mode is not utilized in favor of performance,
so remove it for lemans, aligning with SM8350/SM8450/SM8550/SM8650.
Rename gold_rail_cpu_sleep_0 from cpu-sleep-1 to cpu-sleep-0 since it is
now the only CPU idle state in use.
Signed-off-by: Navya Malempati <navya.malempati@oss.qualcomm.com>
Reviewed-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260522-ml_cpuidle-v1-2-fd311cf33fb4@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Firmware supports both CPU power collapse (little/big_cpu_sleep_0) and
CPU PLL/rail power collapse (little/big_cpu_sleep_1) idle states.
However, CPU power collapse modes are often not utilized in favor of
performance, so remove the CPU power collapse modes for monaco,
aligning with SM8350/SM8450/SM8550/SM8650.
Rename little/big_cpu_sleep_1 as little/big_cpu_sleep_0 since it is now
the only CPU idle state in use.
Signed-off-by: Navya Malempati <navya.malempati@oss.qualcomm.com>
Reviewed-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260522-ml_cpuidle-v1-1-fd311cf33fb4@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Instead of manually specifying reg, reuse the memory region.
This fixed mismatch of the node naming (0xe1000000 X framebuffer@a000000)
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260607-shift8-fb-v1-2-72b9dac25f4a@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the Venus en/decoding device on the Qualcomm RB2 board. The HFI
Gen2 firmware for AR50Lt platforms doesn't work on RB2, so fix the
firmware in the DT for now.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260515-iris-sm6115-v2-4-2ab75229de61@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Define the video en/decoding device present on the SM6115 platform. The
core, AR50LT, is mostly compatible with the one present on the Agatti
devices, so it uses qcom,qcm2290-venus as a fallback.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260515-iris-sm6115-v2-3-2ab75229de61@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Chromium/Depthcharge bootloaders may dynamically add a few device nodes
to a system's DTB under a /firmware node. A typical DT looks something
like the following:
/ {
firmware {
ranges;
coreboot {
compatible = "coreboot";
reg = <...>;
...;
};
};
};
Notably, the /firmware node has an empty 'ranges', but does not have
address/size-cells.
Commit 6e5773d52f ("of/address: Fix WARN when attempting translating
non-translatable addresses") started requiring #address-cells for a
device's parent if we want to use the reg resource in a device node.
This leads to errors like the following:
[ 7.763870] coreboot_table firmware:coreboot: probe with driver coreboot_table failed with error -22
Add appropriate #{address,size}-cells to work around the problem.
Note that Google has also patched the Depthcharge bootloader source to
add {address,size}-cells [1], but bootloader updates are typically
delivered only via Google OS updates. Not all users install Google
software updates, and even if they do, Google may not produce updated
binaries for all/older devices.
[1] https://lore.kernel.org/all/20241209092809.GA3246424@google.com/https://crrev.com/c/6051580 ("coreboot: Insert #address-cells and
#size-cells for firmware node")
Closes: https://lore.kernel.org/all/aeKlYzTiL0OB1y3g@google.com/
Fixes: 6e5773d52f ("of/address: Fix WARN when attempting translating non-translatable addresses")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20260428200712.2660635-8-briannorris@chromium.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The dummy panel compatible 'boe,bf068mwm-td0' is missing documentation
and gives a warning. The 'interconnects' property is also missing from
the binding.
Dropping the nodes here and will just submit panel binding & driver for
use with MSM DRM.
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260603-asteroids-drop-simplefb-v1-1-34d73477c9d4@pm.me
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable video en/decoder on the SM8350 HDK board. The firmware is not
(yet) a part of linux-firmware and needs to be extracted from Android
data.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260515-iris-sc8280xp-v7-6-2e21f6db1897@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add Iris and video clock controller devices, describing the Iris2 core
present on this platform.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260515-iris-sc8280xp-v7-5-2e21f6db1897@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Move memory region reserved for the GPU to its proper place in DT.
Fixes: 6e9612ced0 ("arm64: dts: qcom: sc8280xp: create common zap-shader node")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260515-iris-sc8280xp-v7-2-2e21f6db1897@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the device node for the EVA clock controller (evacc) for Qualcomm
Glymur SoC. This clock controller provides clocks and resets to the
EVA hardware block.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260617-evacc_glymur-v2-4-905108dacaaa@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the device tree bindings for the enhanced video analytics(EVA) clock
controller which is required on Qualcomm Glymur SoC. The controller
provides clocks, resets and power domains for the EVA subsystem.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260617-evacc_glymur-v2-2-905108dacaaa@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Glymur SoC has two distinct core types within the same Oryon
microarchitecture generation:
- qcom,oryon-2-2 (cpu0-cpu5, cluster 0)
- qcom,oryon-2-1 (cpu6-cpu11, cluster 1; cpu12-cpu17, cluster 2)
Without capacity-dmips-mhz the Energy Aware Scheduler treats all 18
cores as equal, leading to suboptimal task placement and frequency
selection. In particular, heavy tasks may be pinned to cluster 0 driving
them to maximum frequency/voltage while cluster 1/2 sit idle.
Fix this by using distinct capacity-dmips-mhz numbers.
Values are derived from DPC (DMIPS-per-clock) measurements at the
825.6 MHz nominal operating point:
oryon-2-2: 1024 (normalised baseline)
oryon-2-1: 1372 (ratio ~1.34x vs oryon-2-2)
Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260706-add-cpu-capacity-dmips-mhz-v1-1-85deced44b20@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the sound card of Glymur-crd board with the routing for speakers.
Add device nodes for the sound support with WSA884x smart speakers
and playback via speakers and recording via DMIC microphones.
Co-developed-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Co-developed-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260706064224.1328576-3-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The touchscreen module on Glymur/Mahua CRDs is different from the one
used on Hamoa CRDs and requires the reset-gpios to be wired to the device.
Without this in place the reset line will remain permanently asserted
during resume leaving the device offline and causing all I2C transactions
to fail with -ENXIO.
Error Logs:
i2c_hid_of 3-0038: failed to change power setting.
i2c_hid_of 3-0038: PM: dpm_run_callback(): i2c_hid_core_pm_resume [i2c_hid] returns -6
i2c_hid_of 3-0038: PM: failed to resume async: error -6
Add the reset GPIO so the driver can deassert the line on resume,
restoring I2C communication with the device.
Fixes: e6bf559f7e ("arm64: dts: qcom: glymur-crd: Enable keyboard, trackpad and touchscreen")
Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260522-arm64-dts-glymur-crd-add-reset-gpio-to-touchscreen-v1-1-c7653924acdc@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
usb_mp_qmpphy0 and usb_mp_qmpphy1 have #clock-cells set to 0 so they take
no specifier. Drop the erroneous QMP_USB43DP_USB3_PIPE_CLK argument.
This fixes the following dtbs_check warning:
clock-controller@100000 (qcom,glymur-gcc): clocks: [[59, 0], ..... [0]]
is too long
from schema $id: http://devicetree.org/schemas/clock/qcom,glymur-gcc.yaml
Fixes: 4eee57dd4d ("arm64: dts: qcom: glymur: Add USB related nodes")
Signed-off-by: Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260602-glymur-fix-usb-mp-qmpphy-clock-specifier-v1-1-19c6f44d5655@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Mahua CRD is pin-to-pin compatible with Glymur CRD, as verified
against schematics; only the external peripherals connected differ.
Move the common board nodes from glymur-crd.dts to glymur-crd.dtsi
to enable reuse by Mahua CRD.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Signed-off-by: Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260629-glymur-mahua-common-nodes-v3-1-98cc00943359@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The spmi_bus2 node was named spmi@c48000, but its reg property
specifies the base address as 0x0c448000. Fix the node name to
spmi@c448000 to match the actual register base address.
Fixes: 41b6e8db40 ("arm64: dts: qcom: Introduce Glymur base dtsi")
Signed-off-by: Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260518-glymur-fix-spmi-bus2-unit-addr-v1-1-27d6edca51e8@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The tertiary controller's HSPHY has its own toggle in TCSR, while the
primary one is wired directly to the XO clock. Fix that.
Fixes: 4af46b7bd6 ("arm64: dts: qcom: x1e80100: Add USB nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260518-topic-hamoa_hsphy_clk-v1-1-d85203756505@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
VBIF register range is 0x3000 long, so correct the code even though
missing part seems without practical impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260405-dts-qcom-display-regs-v2-8-34f4024c65dc@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
DisplayPort block on Qualcomm SM8750 has few too short address space
ranges and misses four more spaces. Complete the hardware description,
which in the future might be important for full feature support.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260405-dts-qcom-display-regs-v2-7-34f4024c65dc@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
DisplayPort block on Qualcomm SM8650 has few too short address space
ranges and misses four more spaces. Complete the hardware description,
which in the future might be important for full feature support.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260405-dts-qcom-display-regs-v2-6-34f4024c65dc@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add register ranges for the SC8280XP interconnect providers so the driver
can program the NoC QoS registers.
Move the real NoC providers under soc@0, keep clk_virt and mc_virt as
virtual top-level providers, and add the clocks required for QoS
programming on aggre1_noc and aggre2_noc.
Signed-off-by: Xilin Wu <sophon@radxa.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260507-sc8280xp-qos-v1-3-15135858cd98@radxa.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IR transmitting LED is connected to SPI8 controller.
Reviewed-by: Sean Young <sean@mess.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Biswapriyo Nath <nathbappai@gmail.com>
Link: https://lore.kernel.org/r/20260330-ginkgo-add-usb-ir-vib-v3-7-c4b778b0d7f8@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The USB-C port is used for powering external devices and transfer
data from/to them.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Biswapriyo Nath <nathbappai@gmail.com>
Link: https://lore.kernel.org/r/20260330-ginkgo-add-usb-ir-vib-v3-5-c4b778b0d7f8@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Plug in USB-C related bits and pieces to enable USB role switching.
Also, remove dr_mode to enable OTG capability.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Biswapriyo Nath <nathbappai@gmail.com>
Link: https://lore.kernel.org/r/20260330-ginkgo-add-usb-ir-vib-v3-4-c4b778b0d7f8@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the vibrator on the PMI632 which is used on this phone.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Biswapriyo Nath <nathbappai@gmail.com>
Link: https://lore.kernel.org/r/20260330-ginkgo-add-usb-ir-vib-v3-3-c4b778b0d7f8@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
SM6125's SMMU uses 36bit VAs, which is a good indicator that we
should increase (dma-)ranges - and by extension #address- and
#size-cells to prevent things from getting lost in translation
(both literally and figuratively). Do so.
Fixes: 7bb7c90e0a ("arm64: dts: qcom: Add Redmi Note 8T")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603141433.MDqfoVHn-lkp@intel.com/
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Biswapriyo Nath <nathbappai@gmail.com>
Link: https://lore.kernel.org/r/20260330-ginkgo-add-usb-ir-vib-v3-1-c4b778b0d7f8@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The xo_board clock is derived from the 48 MHz WiFi output clock (divided
by 2), and not a standalone fixed frequency source.
The previous implementation incorrectly modelled it as a fixed-clock with
fixed frequency, which doesn't reflect the actual hardware clock tree.
Update for fixed-factor-clock compatibility, and properly reference the
source clock.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luo Jie <jie.luo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260106-qcom_ipq5332_cmnpll-v2-5-f9f7e4efbd79@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the CMN PLL node required for networking hardware operation on IPQ5332.
The CMN PLL core runs at 6 GHz on this platform, differing from others like
IPQ9574.
Configure the reference clock path where XO (48 MHz or 96 MHz) routes
through the WiFi block's multiplier/divider to provide a stable 48 MHz
reference to the CMN PLL.
.XO (48 MHZ or 96 MHZ)-->WiFi (multiplier/divider)--> 48 MHZ to CMN PLL.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luo Jie <jie.luo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260106-qcom_ipq5332_cmnpll-v2-4-f9f7e4efbd79@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Since describing the PCIe PHY directly under the RC node is now
deprecated, move the references to the respective PCIe port nodes.
And also move the PCIe PERST and wake GPIOs from the controller nodes to
the corresponding PCIe port nodes on sc8280xp-based platforms:
- sa8295p-adp
- sa8540p-ride
- sc8280xp-crd
- sc8280xp-huawei-gaokun3
- sc8280xp-lenovo-thinkpad-x13s
- sc8280xp-microsoft-arcata
- sc8280xp-microsoft-blackrock
Signed-off-by: Xilin Wu <sophon@radxa.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260507-8280-move-perst-wake-v1-1-5b33cef2d807@radxa.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Motorola Edge 30 is a smartphone released in 2022.
This commit has the following features working:
- Display (simplefb)
- Touchscreen
- Power and volume buttons
- Storage (UFS 3.1)
- Battery (ADSP battmgr)
- USB (Type-C, 2.0, dual-role)
- Wi-Fi and Bluetooth (WCN6750 hw1.0)
As there are 2 display panel options, prepare for full display support
by creating a common dtsi and per-panel dts files, as is done for
other upstreamed devices.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Val Packett <val@packett.cool>
Link: https://lore.kernel.org/r/20260506212319.682749-2-val@packett.cool
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
'reg' is 0xa0000000 so the node name is missing a zero. Add it, so that
the reg and address in the node name matches.
No functional impact.
Fixes: 4cbea66876 ("arm64: dts: qcom: sm7225: Add device tree for Fairphone 4")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260505-sm6350-misc-v1-3-0b9efc22690c@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Define the PIL relocation info region, so that post mortem tools will be
able to locate the loaded remoteprocs.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260505-sm6350-misc-v1-2-0b9efc22690c@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add some interconnect paths for the GPU, the MPSS (modem) and CDSP.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260505-sm6350-misc-v1-1-0b9efc22690c@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the Hall effect sensor (flip cover) for Billion Capture+.
The GPIO is mapped to SW_LID events as in other qcom devices.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com>
Link: https://lore.kernel.org/r/20260331-rimob-new-features-v5-6-5fcf42a29c12@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This device uses a Goodix GT5688 touch controller, connected to i2c_3.
Add it to the device tree.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260331-rimob-new-features-v5-5-5fcf42a29c12@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
