[Why]
To avoid flickering during boot default brightness level set by BIOS
should be maintained for as much of the boot as feasible.
commit 2fe87f54ab ("drm/amd/display: Set default brightness according
to ACPI") attempted to set the right levels for AC vs DC, but brightness
still got reset to maximum level in initialization code for
setup_backlight_device().
[How]
Remove the hardcoded initialization in setup_backlight_device() and
instead program brightness value to match BIOS (AC or DC). This avoids a
brightness flicker from kernel changing the value. Userspace may however
still change it during boot.
Fixes: 2fe87f54ab ("drm/amd/display: Set default brightness according to ACPI")
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When analyzing some crash dumps, not all of the expected DMUB info was
available, so we want to add in-object storage for this data.
[How]
- dmub_srv_debug (renamed to dmub_timeout_info) is already a member of
dmub_diagnostic_data, therefore keep a dmub_diagnostic_data directly in
dmub_srv
- use dmub_srv->debug when collecting diagnostic info instead of stack
object to allow for easy inspection in crash dumps
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
It seems HPD interrupts are enabled by default for all connectors, even
if the hpd source isn't valid. An eDP for example, does not have a valid
hpd source (but does have a valid hpdrx source; see construct_phy()).
Thus, eDPs should have their hpd interrupt disabled.
In the past, this wasn't really an issue. Although the driver gets
interrupted, then acks by writing to hw registers, there weren't any
subscribed handlers that did anything meaningful (see
register_hpd_handlers()).
But things changed with the introduction of IPS. s2idle requires that
the driver allows IPS for DMUB fw to put hw to sleep. Since register
access requires hw to be awake, the driver will block IPS entry to do
so. And no IPS means no hw sleep during s2idle.
This was the observation on DCN35 systems with an eDP. During suspend,
the eDP toggled its hpd pin as part of the panel power down sequence.
The driver was then interrupted, and acked by writing to registers,
blocking IPS entry.
[How]
Since DC marks eDP connections as having invalid hpd sources (see
construct_phy()), DM should disable them at the hw level. Do so in
amdgpu_dm_hpd_init() by disabling all hpd ints first, then selectively
enabling ones for connectors that have valid hpd sources.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When switching between PSR/Replay,
the DPCD config of previous mode is not cleared,
resulting in unexpected behavior in TCON.
[How]
Initialize the DPCD in setup function
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Leon Huang <Leon.Huang1@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update pm_update_grace_period() to more cleaner
pm_config_dequeue_wait_counts(). Previously, grace_period variable was
overloaded as a variable and a macro, making it inflexible to configure
additional dequeue wait times.
pm_config_dequeue_wait_counts() now takes in a cmd / variable. This
allows flexibility to update different dequeue wait times.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN 2.5 uses the PG callback to enable VCN DPM which is
a global state. As such, we need to make sure all instances
are in the same state.
v2: switch to a ref count (Lijo)
v3: switch to its own idle work handler
v4: fix logic in DPG handling
Fixes: 4ce4fe2720 ("drm/amdgpu/vcn: use per instance callbacks for idle work handler")
Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The hw supports it.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for more per-process flags starting with option to configure
MFMA precision for gfx 9.5
v2: Change flag name to KFD_PROC_FLAG_MFMA_HIGH_PRECISION
Remove unused else condition
v3: Bump the KFD API version
v4: Missed SH_MEM_CONFIG__PRECISION_MODE__SHIFT define. Added it.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Define set_cache_memory_policy() for these asics and move all static
changes from update_qpd() which is called each time a queue is created
to set_cache_memory_policy() which is called once during process
initialization
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set per-process static sh_mem config only once during process
initialization. Move all static changes from update_qpd() which is
called each time a queue is created to set_cache_memory_policy() which
is called once during process initialization.
set_cache_memory_policy() is currently defined only for cik and vi
family. So this commit only focuses on these two. A separate commit will
address other asics.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When userspace invokes S4 the flow is:
1) amdgpu_pmops_prepare()
2) amdgpu_pmops_freeze()
3) Create hibernation image
4) amdgpu_pmops_thaw()
5) Write out image to disk
6) Turn off system
Then on resume amdgpu_pmops_restore() is called.
This flow has a problem that because amdgpu_pmops_thaw() is called
it will call amdgpu_device_resume() which will resume all of the GPU.
This includes turning the display hardware back on and discovering
connectors again.
This is an unexpected experience for the display to turn back on.
Adjust the flow so that during the S4 sequence display hardware is
not turned back on.
Reported-by: Xaver Hugl <xaver.hugl@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2038
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20250306185124.44780-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adds register needed for debugging purposes.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Default F8_MODE should be OCP format on gfx950.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Define pin_offsets values in the same way it is done in DCE8
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Updated description for the 'other_mode' parameter. This parameter is
used to determine the display mode of another display controller that
may be sharing the line buffer.
Cc: Ken Wang <Qingqing.Wang@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add error handling to propagate amdgpu_cgs_create_device() failures
to the caller. When amdgpu_cgs_create_device() fails, release hwmgr
and return -ENOMEM to prevent null pointer dereference.
[v1]->[v2]: Change error code from -EINVAL to -ENOMEM. Free hwmgr.
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Starting from 6.11, AMDGPU driver, while being loaded with amdgpu.dc=1,
due to lack of .is_two_pixels_per_container function in dce60_tg_funcs,
causes a NULL pointer dereference on PCs with old GPUs, such as R9 280X.
So this fix adds missing .is_two_pixels_per_container to dce60_tg_funcs.
Reported-by: Rosen Penev <rosenp@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3942
Fixes: e6a901a008 ("drm/amd/display: use even ODM slice width for two pixels per container")
Signed-off-by: Aliaksei Urbanski <aliaksei.urbanski@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We advertise DCC as supported for NV12/P010 formats on GFX12,
but it would fail on this check on atomic commit.
Signed-off-by: David Rosca <david.rosca@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Encode socket id to CPER record id to be unique across devices.
v2: add pointer check for adev->smuio.funcs->get_socket_id
v2: set 0 if adev->smuio.funcs->get_socket_id is NULL
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For gfx_v9_4_3 specifically, before regGB_ADDR_CONFIG is overwritten
in gfx hw_init it is read out to popluate the gb_addr_config_fields
in the sw_init stage, which causes mismatch.
Fix it by using the golden value in sw_init as well.
v2: This is a driver-set golden reg and keep as it is (Lijo)
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For aqua_vanjaram, A0 HW is retired so remove the code
specific for it in gfx ip init.
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For default policy, driver will issue an RMA event when the number of
bad pages is greater than 8 physical rows, rather than reaches 8
physical rows, don't rely on threshold configurable parameters in
default mode.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While the entry get in svm_range_unmap_from_cpu is the last entry, and
the entry is page fault, it also need to be dropped. So for equal case,
it also need to be dropped.
v2:
Only modify the svm_range_restore_pages.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Xiaogang Chen<xiaogang.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aldebaran SRIOV VF cannot access the power brake feature regs.
The accesses can be skipped to avoid a dmesg warning.
v2: Remove redundant asic type check
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove unused declaration of gws_debug_workaround.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Amber Lin <amber.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aldebaran SRIOV VF does not have write permissions to GRBM_CTNL.
This access can be skipped to avoid a dmesg warning.
v2: Use GC IP version check instead of asic check
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cross-subsystem Changes:
base:
- component: Provide helper to query bound status
fbdev:
- fbtft: Remove access to page->index
Core Changes:
- Fix usage of logging macros in several places
gem:
- Add test function for imported dma-bufs and use it in core and helpers
- Avoid struct drm_gem_object.import_attach
tests:
- Fix lockdep warnings
ttm:
- Add helpers for TTM shrinker
Driver Changes:
adp:
- Add support for Apple Touch Bar displays on M1/M2
amdxdna:
- Fix interrupt handling
appletbdrm:
- Add support for Apple Touch Bar displays on x86
bridge:
- synopsys: Add HDMI audio support
- ti-sn65dsi83: Support negative DE polarity
ipu-v3:
- Remove unused code
nouveau:
- Avoid multiple -Wflex-array-member-not-at-end warnings
panthor:
- Fix CS_STATUS_ defines
- Improve locking
rockchip:
- analogix_dp: Add eDP support
- lvds: Improve logging
- vop2: Improve HDMI mode handling; Add support for RK3576
- Fix shutdown
- Support rk3562-mali
xe:
- Use TTM shrinker
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmfJnNcACgkQaA3BHVML
eiNk/QgArbk5nWCS/Wbn/LtLUh5rdIEj6hUdTUurwbKb1TWM4UKTywU9ZjcoOohx
vcwD8QykjnfGDQqSx6uiQM27TQoyFucSgkLyp8asyzYOKqIaaIdvsdEPuu9LKnIw
jVcCDnoc5sQ1OjMLfTzcod4M22amL+fdcWjKXWJvHKuHfsLNY5ppPVxEmTeqiOcR
fnJ2Dlpi9Vkyft+j1begmm9PGTphWedu3xfkUdIR0o4t8ruEvuBq5xm55gg/lBo5
7mdZpqdsRtw+U9oowv17XHRVcjxJEDhGAgO21zW5FhP3PU6Sasgpap9iNX3IbTDj
6426osJOFCvqleQJOimc8SL20qf4mQ==
=62oM
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2025-03-06' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.15:
Cross-subsystem Changes:
base:
- component: Provide helper to query bound status
fbdev:
- fbtft: Remove access to page->index
Core Changes:
- Fix usage of logging macros in several places
gem:
- Add test function for imported dma-bufs and use it in core and helpers
- Avoid struct drm_gem_object.import_attach
tests:
- Fix lockdep warnings
ttm:
- Add helpers for TTM shrinker
Driver Changes:
adp:
- Add support for Apple Touch Bar displays on M1/M2
amdxdna:
- Fix interrupt handling
appletbdrm:
- Add support for Apple Touch Bar displays on x86
bridge:
- synopsys: Add HDMI audio support
- ti-sn65dsi83: Support negative DE polarity
ipu-v3:
- Remove unused code
nouveau:
- Avoid multiple -Wflex-array-member-not-at-end warnings
panthor:
- Fix CS_STATUS_ defines
- Improve locking
rockchip:
- analogix_dp: Add eDP support
- lvds: Improve logging
- vop2: Improve HDMI mode handling; Add support for RK3576
- Fix shutdown
- Support rk3562-mali
xe:
- Use TTM shrinker
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306130700.GA485504@linux.fritz.box
Avoid dereferencing struct drm_gem_object.import_attach for the
imported dma-buf. The dma_buf field in the GEM object instance refers
to the same buffer. Prepares to make import_attach optional.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Anusha Srivatsa <asrivats@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226172457.217725-11-tzimmermann@suse.de
Instead of testing import_attach for imported GEM buffers, invoke
drm_gem_is_imported() to do the test.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Anusha Srivatsa <asrivats@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226172457.217725-10-tzimmermann@suse.de
Instead of testing import_attach for imported GEM buffers, invoke
drm_gem_is_imported() to do the test.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Anusha Srivatsa <asrivats@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226172457.217725-9-tzimmermann@suse.de
Avoid dereferencing struct drm_gem_object.import_attach for the
imported dma-buf. The dma_buf field in the GEM object instance refers
to the same buffer. Prepares to make import_attach optional.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Anusha Srivatsa <asrivats@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226172457.217725-8-tzimmermann@suse.de
Instead of testing import_attach for imported GEM buffers, invoke
drm_gem_is_imported() to do the test.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Anusha Srivatsa <asrivats@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226172457.217725-7-tzimmermann@suse.de
Avoid dereferencing struct drm_gem_object.import_attach for the
imported dma-buf. The dma_buf field in the GEM object instance refers
to the same buffer. Prepares to make import_attach optional.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Anusha Srivatsa <asrivats@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226172457.217725-6-tzimmermann@suse.de
Instead of testing import_attach for imported GEM buffers, invoke
drm_gem_is_imported() to do the test.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Anusha Srivatsa <asrivats@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226172457.217725-5-tzimmermann@suse.de
Avoid dereferencing struct drm_gem_object.import_attach for the
imported dma-buf. The dma_buf field in the GEM object instance refers
to the same buffer. Prepares to make import_attach optional.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Anusha Srivatsa <asrivats@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226172457.217725-4-tzimmermann@suse.de
Instead of testing import_attach for imported GEM buffers, invoke
drm_gem_is_imported() to do the test.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Anusha Srivatsa <asrivats@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226172457.217725-3-tzimmermann@suse.de
Add drm_gem_is_imported() that tests if a GEM object's buffer has
been imported. Update the GEM code accordingly.
GEM code usually tests for imports if import_attach has been set
in struct drm_gem_object. But attaching a dma-buf on import requires
a DMA-capable importer device, which is not the case for many serial
busses like USB or I2C. The new helper tests if a GEM object's dma-buf
has been created from the GEM object.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Anusha Srivatsa <asrivats@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226172457.217725-2-tzimmermann@suse.de
The XE_PL_TT watermark was set to 50% of system memory.
The idea behind that was unclear since the net effect is that
TT memory will be evicted to TTM_PL_SYSTEM memory if that
watermark is exceeded, requiring PPGTT rebinds and dma
remapping. But there is no similar watermark for TTM_PL_1SYSTEM
memory.
The TTM functionality that tries to swap out system memory to
shmem objects if a 50% limit of total system memory is reached
is orthogonal to this, and with the shrinker added, it's no
longer in effect.
Replace the 50% TTM_PL_TT limit with a 100% limit, in effect
allowing all graphics memory to be bound to the device unless it
has been swapped out by the shrinker.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/intel-xe/20250305092220.123405-8-thomas.hellstrom@linux.intel.com
Rather than relying on the TTM watermark accounting add a shrinker
for xe_bos in TT or system memory.
Leverage the newly added TTM per-page shrinking and shmem backup
support.
Although xe doesn't fully support WONTNEED (purgeable) bos yet,
introduce and add shrinker support for purgeable ttm_tts.
v2:
- Cleanups bugfixes and a KUNIT shrinker test.
- Add writeback support, and activate if kswapd.
v3:
- Move the try_shrink() helper to core TTM.
- Minor cleanups.
v4:
- Add runtime pm for the shrinker. Shrinking may require an active
device for CCS metadata copying.
v5:
- Separately purge ghost- and zombie objects in the shrinker.
- Fix a format specifier - type inconsistency. (Kernel test robot).
v7:
- s/long/s64/ (Christian König)
- s/sofar/progress/ (Matt Brost)
v8:
- Rebase on Xe KUNIT update.
- Add content verifying to the shrinker kunit test.
- Split out TTM changes to a separate patch.
- Get rid of multiple bool arguments for clarity (Matt Brost)
- Avoid an error pointer dereference (Matt Brost)
- Avoid an integer overflow (Matt Auld)
- Address misc review comments by Matt Brost.
v9:
- Fix a compliation error.
- Rebase.
v10:
- Update to new LRU walk interface.
- Rework ghost-, zombie and purged object shrinking.
- Rebase.
v11:
- Use additional TTM helpers.
- Honor __GFP_FS and __GFP_IO
- Rebase.
v13:
- Use ttm_tt_setup_backup().
v14:
- Don't set up backup on imported bos.
v15:
- Rebase on backup interface changes.
Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/intel-xe/20250305092220.123405-7-thomas.hellstrom@linux.intel.com
Add a number of helpers for shrinking that access core TTM and
core MM functionality in a way that make them unsuitable for
driver open-coding.
v11:
- New patch (split off from previous) and additional helpers.
v13:
- Adapt to ttm_backup interface change.
- Take resource off LRU when backed up.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/intel-xe/20250305092220.123405-6-thomas.hellstrom@linux.intel.com
Following the design direction communicated here:
https://lore.kernel.org/linux-mm/b7491378-defd-4f1c-31e2-29e4c77e2d67@amd.com/T/#ma918844aa8a6efe8768fdcda0c6590d5c93850c9
Export a LRU walker for driver shrinker use. The walker
initially supports only trylocking, since that's the
method used by shrinkes. The walker makes use of
scoped_guard() to allow exiting from the LRU walk loop
without performing any explicit unlocking or
cleanup.
v8:
- Split out from another patch.
- Use a struct for bool arguments to increase readability (Matt Brost).
- Unmap user-space cpu-mappings before shrinking pages.
- Explain non-fatal error codes (Matt Brost)
v10:
- Instead of using the existing helper, Wrap the interface inside out and
provide a loop to de-midlayer things the LRU iteration (Christian König).
- Removing the R-B by Matt Brost since the patch was significantly changed.
v11:
- Split the patch up to include just the LRU walk helper.
v12:
- Indent after scoped_guard() (Matt Brost)
v15:
- Adapt to new definition of scoped_guard()
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/intel-xe/20250305092220.123405-5-thomas.hellstrom@linux.intel.com
Use fault-injection to test partial TTM swapout and interrupted swapin.
Return -EINTR for swapin to test the callers ability to handle and
restart the swapin, and on swapout perform a partial swapout to test that
the swapin and release_shrunken functionality.
v8:
- Use the core fault-injection system.
v9:
- Fix compliation failure for !CONFIG_FAULT_INJECTION
Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/intel-xe/20250305092220.123405-4-thomas.hellstrom@linux.intel.com
Provide a helper to shrink ttm_tt page-vectors on a per-page
basis. A ttm_backup backend could then in theory get away with
allocating a single temporary page for each struct ttm_tt.
This is accomplished by splitting larger pages before trying to
back them up.
In the future we could allow ttm_backup to handle backing up
large pages as well, but currently there's no benefit in
doing that, since the shmem backup backend would have to
split those anyway to avoid allocating too much temporary
memory, and if the backend instead inserts pages into the
swap-cache, those are split on reclaim by the core.
Due to potential backup- and recover errors, allow partially swapped
out struct ttm_tt's, although mark them as swapped out stopping them
from being swapped out a second time. More details in the ttm_pool.c
DOC section.
v2:
- A couple of cleanups and error fixes in ttm_pool_back_up_tt.
- s/back_up/backup/
- Add a writeback parameter to the exported interface.
v8:
- Use a struct for flags for readability (Matt Brost)
- Address misc other review comments (Matt Brost)
v9:
- Update the kerneldoc for the ttm_tt::backup field.
v10:
- Rebase.
v13:
- Rebase on ttm_backup interface change. Update kerneldoc.
- Rebase and adjust ttm_tt_is_swapped().
v15:
- Rebase on ttm_backup return value change.
- Rebase on previous restructuring of ttm_pool_alloc()
- Rework the ttm_pool backup interface (Christian König)
- Remove cond_resched() (Christian König)
- Get rid of the need to allocate an intermediate page array
when restoring a multi-order page (Christian König)
- Update documentation.
Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Christian Koenig <christian.koenig@amd.com>
Link: https://lore.kernel.org/intel-xe/20250305092220.123405-3-thomas.hellstrom@linux.intel.com
Provide a standalone shmem backup implementation.
Given the ttm_backup interface, this could
later on be extended to providing other backup
implementation than shmem, with one use-case being
GPU swapout to a user-provided fd.
v5:
- Fix a UAF. (kernel test robot, Dan Carptenter)
v6:
- Rename ttm_backup_shmem_copy_page() function argument
(Matthew Brost)
- Add some missing documentation
v8:
- Use folio_file_page to get to the page we want to writeback
instead of using the first page of the folio.
v13:
- Remove the base class abstraction (Christian König)
- Include ttm_backup_bytes_avail().
v14:
- Fix kerneldoc for ttm_backup_bytes_avail() (0-day)
- Work around casting of __randomize_layout struct pointer (0-day)
v15:
- Return negative error code from ttm_backup_backup_page()
(Christian König)
- Doc fixes. (Christian König).
Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/intel-xe/20250305092220.123405-2-thomas.hellstrom@linux.intel.com
For cores 1 through 9 repair the core reset sequence by
adjusting offsets to access the expected registers.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
