drm_gem_get_unmapped_area() relies on mm_get_unmapped_area() which is
only available if CONFIG_MMU=y.
Fixes: 99bda20d6d ("drm/gem: Introduce drm_gem_get_unmapped_area() fop")
Cc: Loïc Molinari <loic.molinari@collabora.com>
Reviewed-by: Loïc Molinari <loic.molinari@collabora.com>
Link: https://patch.msgid.link/20251209171151.2449120-1-boris.brezillon@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Since the stolen memory hooks are function pointers, make some of them
optional instead of having to define them for xe.
insert_node, area_address, and area_size are only needed on platforms
not supported by xe.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patch.msgid.link/0dbb460e8bd1df29df98862d08fcdfda03912673.1764930576.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Call the stolen memory interface through the display parent interface.
This makes xe compat gem/i915_gem_stolen.h redundant, and it can be
removed.
v2: Rebase, convert one more call that appeared
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patch.msgid.link/350c82c49fe40f6319d14d309180e2e2752145ac.1764930576.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
All the objects that need to implement some callbacks in KMS have a
pointer in there structure to the main drm_device.
However, it's not the case for drm_private_objs, which makes it harder
than it needs to be to implement some of its callbacks. Let's add that
pointer.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20251014-drm-private-obj-reset-v2-1-6dd60e985e9d@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm_gem_object_init_with_mnt() and drm_gem_shmem_create_with_mnt() can
be removed now that the drivers use the new drm_gem_huge_mnt_create()
and drm_gem_get_huge_mnt() helpers.
v5:
- use drm_gem_has_huge_mnt() helper
- compile out shmem_file_setup_with_mnt() call in builds with
CONFIG_TRANSPARENT_HUGEPAGE=n
v9:
- replace drm_gem_has_huge_mnt() with drm_gem_get_huge_mnt()
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20251205182231.194072-8-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Add the drm_gem_huge_mnt_create() and drm_gem_get_huge_mnt() helpers
to avoid code duplication in the i915, V3D, Panfrost and Panthor
drivers. The former creates and mounts a dedicated huge tmpfs
mountpoint, for the lifetime of a DRM device, used at GEM object
initialization. The latter retrieves the dedicated huge tmpfs
mountpoint used by a DRM device.
The next commits will port drivers to these helpers.
v3:
- store huge tmpfs mountpoint in drm_device
v4:
- return 0 in builds with CONFIG_TRANSPARENT_HUGEPAGE=n
- return 0 when huge_mnt already exists
- use new vfs_parse_fs_string() helper
v5:
- remove warning on !dev->huge_mnt and reset to NULL on free
- inline drm_gem_huge_mnt_create() to remove func from text and avoid
calls in builds with CONFIG_TRANSPARENT_HUGEPAGE=n
- compile out drm_device's huge_mnt field in builds with
CONFIG_TRANSPARENT_HUGEPAGE=n
- add drm_gem_has_huge_mnt() helper
v6:
- move huge_mnt doc into ifdef'd section
- either inline or export drm_gem_huge_mnt_create()
v7:
- include <drm/drm_device.h> in drm_gem.h
v9:
- replace drm_gem_has_huge_mnt() by drm_gem_get_huge_mnt()
v11:
- doc fixes
- add Boris and Maíra R-bs
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20251205182231.194072-5-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
mmap() calls on the DRM file pointer currently always end up using
mm_get_unmapped_area() to get a free mapping region. On builds with
CONFIG_TRANSPARENT_HUGEPAGE enabled, this isn't ideal for GEM objects
backed by shmem buffers on mountpoints setting the 'huge=' option
because it can't correctly figure out the potentially huge address
alignment required.
This commit introduces the drm_gem_get_unmapped_area() function which
is meant to be used as a get_unmapped_area file operation on the DRM
file pointer to lookup GEM objects based on their fake offsets and get
a properly aligned region by calling shmem_get_unmapped_area() with
the right file pointer. If a GEM object isn't available at the given
offset or if the caller isn't granted access to it, the function falls
back to mm_get_unmapped_area().
This also makes drm_gem_get_unmapped_area() part of the default GEM
file operations so that all the DRM drivers can benefit from more
efficient mappings thanks to the huge page fault handler introduced in
previous commit 'drm/shmem-helper: Add huge page fault handler'.
The shmem_get_unmapped_area() function needs to be exported so that
it can be used from the DRM subsystem.
v3:
- include <linux/sched/mm.h> in drm_gem.c
- forward to shmem layer in builds with CONFIG_TRANSPARENT_HUGEPAGE=n
v6:
- use GPL variant to export drm_gem_get_unmapped_area()
- don't export shmem_get_unmapped_area() anymore (use f_op instead)
v11:
- rename drm_gem_object_lookup_from_offset() to
drm_gem_object_lookup_at_offset()
- add Boris R-b
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251205182231.194072-4-loic.molinari@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Backmerging to bring in a needed dependency for the Xe VFIO
driver variant. This should ideally have been done before we
commited that, so we now have a small window in drm-xe-next
where that driver doesn't compile.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512030331.I8CveRre-lkp@intel.com/
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Remove the debug_enter/debug_leave helpers, as there are no DRM
drivers supporting debugging with kgdb. Remove code to keep track
of existing fbdev-emulation state. None of this required any longer.
Also remove mode_set_base_atomic from struct drm_crtc_helper_funcs,
which has no callers or implementations.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20251125130634.1080966-5-tzimmermann@suse.de
UAPI Changes:
- Add support for drm colorop pipeline.
- Add COLOR PIPELINE plane property.
- Add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE.
Cross-subsystem Changes:
- Attempt to use higher order mappings in system heap allocator.
- Always taint kernel with sw-sync.
Core Changes:
- Small fixes to drm/gem.
- Support emergency restore to drm-client.
- Allocate and release fb_info in single place.
- Rework ttm pipelined eviction fence handling.
Driver Changes:
- Support the drm color pipeline in vkms, amdgfx.
- Add NVJPG driver for tegra.
- Assorted small fixes and updates to rockchip, bridge/dw-hdmi-qp,
panthor.
- Add ASL CS5263 DP-to-HDMI simple bridge.
- Add and improve support for G LD070WX3-SL01 MIPI DSI, Samsung LTL106AL0,
Samsung LTL106AL01, Raystar RFF500F-AWH-DNN, Winstar WF70A8SYJHLNGA,
Wanchanglong w552946aaa, Samsung SOFEF00, Lenovo X13s panel.
- Add support for it66122 to it66121.
- Support mali-G1 gpu in panthor.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAmkuEAsACgkQ/lWMcqZw
E8Oqtw//fJqWXjhzobnffWEM7pbkWUjau83R+tqg/dwyLP7paSfPg8VEnesAjZoW
TWlaYY7v3o0VYH1p533li/ImXcK1AkaCHyx0SfIBnEgR2X27KS1TvVy/iMDGBE50
i609Skw/UjetDFojozG63NxkannlKCy5mL+WzCpqxg3FakRyrqvy20UZgQQrDtAJ
v7etdikmfZz01+8WclvdprsJ+y391hhFM4FYYh6UDo5t/QQluMW7f3YiwAxUF3/9
zuyRJD9ckIGsZ9Y0FxBwH/m25/SeTyW36ERrWOsgVlO3FzAOc7W9AukkgXO9orMu
OAxheo0HYTlYonM1yitrgKJsXa7PdjxHL5ZwdPDSJWBjTw3b3xIWgJINc9k2SHKc
OWoPOg54JDY5Yte17qF5od0MMmk5iG2YxHFMnQAQZ7nFOL+m8H7nwHzbbsu0iepP
FOsly0Hr2UJY29QKHJPfS5pfiB5UJeezYnVDgZBzCrBZK/svpbpfb0KolNYZIHji
qfEZ0o4RmkY0lwGYQ467Ow2NmIZIKmGgDiqbFZ5KoFo1tLE9UX3KDJY1hZg1X3w8
sH2tEwCh3JGYsfBmEs4xe+iWElKe+0yrX08LpljpV3v0yzULKMC36qb1Wr9xJMBO
gmWFwCvzevpawotAc4OyqRWWP/ncyxuNSb3gd50Q/D/4UPUxo3I=
=QBjM
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2025-12-01-1' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
Extra drm-misc-next for v6.19-rc1:
UAPI Changes:
- Add support for drm colorop pipeline.
- Add COLOR PIPELINE plane property.
- Add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE.
Cross-subsystem Changes:
- Attempt to use higher order mappings in system heap allocator.
- Always taint kernel with sw-sync.
Core Changes:
- Small fixes to drm/gem.
- Support emergency restore to drm-client.
- Allocate and release fb_info in single place.
- Rework ttm pipelined eviction fence handling.
Driver Changes:
- Support the drm color pipeline in vkms, amdgfx.
- Add NVJPG driver for tegra.
- Assorted small fixes and updates to rockchip, bridge/dw-hdmi-qp,
panthor.
- Add ASL CS5263 DP-to-HDMI simple bridge.
- Add and improve support for G LD070WX3-SL01 MIPI DSI, Samsung LTL106AL0,
Samsung LTL106AL01, Raystar RFF500F-AWH-DNN, Winstar WF70A8SYJHLNGA,
Wanchanglong w552946aaa, Samsung SOFEF00, Lenovo X13s panel.
- Add support for it66122 to it66121.
- Support mali-G1 gpu in panthor.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/aa5cbd50-7676-4a59-bbed-e8428af86804@linux.intel.com
Device specific VFIO driver variant for Xe will implement VF migration.
Export everything that's needed for migration ops.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251127093934.1462188-4-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
(cherry picked from commit 17f22465c5)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Device specific VFIO driver variant for Xe will implement VF migration.
Export everything that's needed for migration ops.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251127093934.1462188-4-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Add "DRM_COLOROP_1D_CURVE_GAMMA22" and DRM_COLOROP_1D_CURVE_GAMMA22_INV
subtypes to drm_colorop of DRM_COLOROP_1D_CURVE.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-51-alex.hung@amd.com
It is to be used to enable HDR by allowing userpace to create and pass
3D LUTs to kernel and hardware.
new drm_colorop_type: DRM_COLOROP_3D_LUT.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-46-alex.hung@amd.com
Not all HW will be able to do bypass on all color
operations. Introduce an 32 bits 'flags' for all colorop
init functions and DRM_COLOROP_FLAG_ALLOW_BYPASS for creating
the BYPASS property when it's true.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-45-alex.hung@amd.com
We want to make sure userspace is aware of the 1D LUT
interpolation. While linear interpolation is common it
might not be supported on all HW. Give driver implementers
a way to specify their interpolation.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-44-alex.hung@amd.com
This introduces a new drm_colorop_type: DRM_COLOROP_MULTIPLIER.
It's a simple multiplier to all pixel values. The value is
specified via a S31.32 fixed point provided via the
"MULTIPLIER" property.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-41-alex.hung@amd.com
We've previously introduced DRM_COLOROP_1D_CURVE for
pre-defined 1D curves. But we also have HW that supports
custom curves and userspace needs the ability to pass
custom curves, aka LUTs.
This patch introduces a new colorop type, called
DRM_COLOROP_1D_LUT that provides a SIZE property which
is used by a driver to advertise the supported SIZE
of the LUT, as well as a DATA property which userspace
uses to set the LUT.
DATA and size function in the same way as current drm_crtc
GAMMA and DEGAMMA LUTs.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Co-developed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-38-alex.hung@amd.com
Add helper to extract lut values in 32-bit precision needed by
hardware.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-37-alex.hung@amd.com
Existing LUT precision structure drm_color_lut has only 16 bit
precision. This is not enough for upcoming enhanced hardwares
and advance usecases like HDR processing. Hence added a new
structure with 32 bit precision values.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-36-alex.hung@amd.com
The BT.709 and BT.2020 OETFs are the same, the only difference
being that the BT.2020 variant is defined with more precision
for 10 and 12-bit per color encodings.
Both are used as encoding functions for video content, and are
therefore defined as OETF (opto-electronic transfer function)
instead of as EOTF (electro-optical transfer function).
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-34-alex.hung@amd.com
The PQ function defines a mapping of code values to nits (cd/m^2).
The max code value maps to 10,000 nits.
Windows DWM's canonical composition color space (CCCS) defaults
to composing SDR contents to 80 nits and uses a float value of
1.0 to represent this. For this reason AMD HW hard-codes a PQ
function that is scaled by 125, yielding 80 nit PQ values for
1.0 and 10,000 nits at 125.0.
This patch introduces this scaled PQ EOTF and its inverse as
1D curve types.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-32-alex.hung@amd.com
Create a new macro for_each_new_colorop_in_state to access new
drm_colorop_state updated from uapi.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-25-alex.hung@amd.com
Drivers will need to know whether an atomic check/commit
originated from a client with DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE
so they can ignore deprecated properties, like COLOR_ENCODING
and COLOR_RANGE.
Pass the plane_color_pipeline bit to drm_atomic_state.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-24-alex.hung@amd.com
This type is used to support a 3x4 matrix in colorops. A 3x4
matrix uses the last column as a "bias" column. Some HW exposes
support for 3x4. The calculation looks like:
out matrix in
|R| |0 1 2 3 | | R |
|G| = |4 5 6 7 | x | G |
|B| |8 9 10 11| | B |
|1.0|
This is also the first colorop where we need a blob property to
program the property. For that we'll introduce a new DATA
property that can be used by all colorop TYPEs requiring a
blob. The way a DATA blob is read depends on the TYPE of
the colorop.
We only create the DATA property for property types that
need it.
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-19-alex.hung@amd.com
The functions are to clean up color pipeline when a device driver
fails to create its color pipeline.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-14-alex.hung@amd.com
With the introduction of the pre-blending color pipeline we
can no longer have color operations that don't have a clear
position in the color pipeline. We deprecate all existing
plane properties. For upstream drivers those are:
- COLOR_ENCODING
- COLOR_RANGE
Drivers are expected to ignore these properties when
programming the HW. DRM clients that register with
DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE will not be allowed to
set the COLOR_ENCODING and COLOR_RANGE properties.
Setting of the COLOR_PIPELINE plane property or drm_colorop
properties is only allowed for userspace that sets this
client cap.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-12-alex.hung@amd.com
We're adding a new enum COLOR PIPELINE property. This
property will have entries for each COLOR PIPELINE by
referencing the DRM object ID of the first drm_colorop
of the pipeline. 0 disables the entire COLOR PIPELINE.
Userspace can use this to discover the available color
pipelines, as well as set the desired one. The color
pipelines are programmed via properties on the actual
drm_colorop objects.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-11-alex.hung@amd.com
We'll construct color pipelines out of drm_colorop by
chaining them via the NEXT pointer. NEXT will point to
the next drm_colorop in the pipeline, or by 0 if we're
at the end of the pipeline.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-9-alex.hung@amd.com
We want to be able to bypass each colorop at all times.
Introduce a new BYPASS boolean property for this.
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-8-alex.hung@amd.com
Add a new drm_colorop with DRM_COLOROP_1D_CURVE with two subtypes:
DRM_COLOROP_1D_CURVE_SRGB_EOTF and DRM_COLOROP_1D_CURVE_SRGB_INV_EOTF.
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Co-developed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-7-alex.hung@amd.com
Add a read-only TYPE property. The TYPE specifies the colorop
type, such as enumerated curve, 1D LUT, CTM, 3D LUT, PWL LUT,
etc.
For now we're only introducing an enumerated 1D LUT type to
illustrate the concept.
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-6-alex.hung@amd.com
This patches introduces a new drm_colorop mode object. This
object represents color transformations and can be used to
define color pipelines.
We also introduce the drm_colorop_state here, as well as
various helpers and state tracking bits.
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-5-alex.hung@amd.com
CTM values are defined as signed-magnitude values. Add
a helper that converts from CTM signed-magnitude fixed
point value to the twos-complement value used by
drm_fixed.
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20251115000237.3561250-2-alex.hung@amd.com
Until now ttm stored a single pipelined eviction fence which means
drivers had to use a single entity for these evictions.
To lift this requirement, this commit allows up to 8 entities to
be used.
Ideally a dma_resv object would have been used as a container of
the eviction fences, but the locking rules makes it complex.
dma_resv all have the same ww_class, which means "Attempting to
lock more mutexes after ww_acquire_done." is an error.
One alternative considered was to introduced a 2nd ww_class for
specific resv to hold a single "transient" lock (= the resv lock
would only be held for a short period, without taking any other
locks).
The other option, is to statically reserve a fence array, and
extend the existing code to deal with N fences, instead of 1.
The driver is still responsible to reserve the correct number
of fence slots.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Link: https://lore.kernel.org/r/20251121101315.3585-20-pierre-eric.pelloux-prayer@amd.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Move the calls to drm_fb_helper_alloc_info() from drivers into a
single place in fbdev helpers. Allocates struct fb_info for a new
framebuffer device. Then call drm_fb_helper_single_fb_probe() to
create an fbdev screen buffer. Also release the instance on errors
by calling drm_fb_helper_release_info().
Simplifies the code and fixes the error cleanup for some of the
drivers.
Regular release of the struct fb_info instance still happens in
drm_fb_helper_fini() as before.
v2:
- remove error rollback in driver implementations (kernel test robot)
- initialize info in TTM implementation (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com> # radeon
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> # msm
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20251027081245.80262-1-tzimmermann@suse.de
Move the sysrq functionality from DRM fbdev helpers to the DRM device
and in-kernel clients, so that it becomes available on all clients.
DRM fbdev helpers support emergency restoration of the console output
via a special key combination. Press SysRq+v to replace the current
compositor with the kernel's output on the framebuffer console. This
allows users to see the log messages during system emergencies.
By moving the functionality from fbdev helpers to the DRM device, any
in-kernel client can serve as emergency output. This can be used to
bring up drm_log, for example.
Each DRM device registers itself to the list of possible sysrq handlers.
On receiving SysRq+v, the DRM core goes over all registered devices and
restores an in-kernel DRM client for each of them.
See Documentation/admin-guide/sysrq.rst on how to invoke SysRq. Switch
VTs to bring back the user-space compositor.
v2:
- declare placeholders as 'static inline' (kernel test robot)
- fix grammar in commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20251110154616.539328-3-tzimmermann@suse.de
Add force parameter to client restore and pass value through the
layers. The only currently used value is false.
If force is true, the client should restore its display even if it
does not hold the DRM master lock. This is be required for emergency
output, such as sysrq.
While at it, inline drm_fb_helper_lastclose(), which is a trivial
wrapper around drm_fb_helper_restore_fbdev_mode_unlocked().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20251110154616.539328-2-tzimmermann@suse.de
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmkaT2IeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGnakIAIq6O35+abAlDGe7
n8IwX/4hwDJ9Ol2vddg6jTdio3szSlvcXRAyijkG35etLap+i+Q78Q9H1fRcQ8CF
5t9kfs5oCVWEDlsHMI+Q38vYB3tWikaIUIuao6pH5U50fsA0KM/287TLYdzvmBsK
gy0BHoZhl++xdMsD2HNwt08RrK/IyY+Zp9i7pKhcsxJiJCgy8nq5ZxhmRPbqTKNc
IqIBPzG+UYcOd88Iz377Ax+TnzWaTpwyvfaiU8DVFMN0FeENdk1FY8ClYfpYxCDH
Pm5NzL/f54VtdZ3aL1fKmYwWN7WFJT4FH3l6DOvtCc+Gx3KW1a3Y508CbqYBXvgY
QV4oH4Y=
=iSoY
-----END PGP SIGNATURE-----
Merge tag 'v6.18-rc6' into drm-next
Linux 6.18-rc6
Backmerge in order to merge msm next
Signed-off-by: Dave Airlie <airlied@redhat.com>
Rust
- Make slice::as_flattened usable on all supported versions of rustc.
- Add FromBytes::from_bytes_prefix() method.
Core Changes:
- Update Tyr in MAINTAINERS file.
- Remove redundant device ptr from Rust GEM object.
- Change how AlwaysRefCounted is implemented for GEM objects.
- Add deferred vm_bo cleanup to GPUVM and use it in Panthor.
Driver Changes:
Nova Core
- Introduction of bitfield! macro, with support for different storage sizes
and custom visibility.
- Introduction of safe converters between integer types for which the
conversion is lossless.
- GSP initialized up to fully booted state on Ampere.
- Use more future-proof register for GPU identification.
- Various simplifications and optimizations.
Nova
- Select NOVA_CORE.
- Depend on CONFIG_64BIT.
-----BEGIN PGP SIGNATURE-----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=yKU+
-----END PGP SIGNATURE-----
Merge tag 'drm-rust-next-2025-11-18' of https://gitlab.freedesktop.org/drm/rust/kernel into drm-next
Cross-subsystem Changes:
Rust
- Make slice::as_flattened usable on all supported versions of rustc.
- Add FromBytes::from_bytes_prefix() method.
Core Changes:
- Update Tyr in MAINTAINERS file.
- Remove redundant device ptr from Rust GEM object.
- Change how AlwaysRefCounted is implemented for GEM objects.
- Add deferred vm_bo cleanup to GPUVM and use it in Panthor.
Driver Changes:
Nova Core
- Introduction of bitfield! macro, with support for different storage sizes
and custom visibility.
- Introduction of safe converters between integer types for which the
conversion is lossless.
- GSP initialized up to fully booted state on Ampere.
- Use more future-proof register for GPU identification.
- Various simplifications and optimizations.
Nova
- Select NOVA_CORE.
- Depend on CONFIG_64BIT.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/aRxtJC0D1pQUepF4@google.com
Add .fence_priority_display() to display parent interface, removing a
display dependency on gem/i915_gem_object.h.
This allows us to remove the xe compat gem/i915_gem_object.h.
v2: Don't mix this with the rps interface (Ville)
v3: Rebase
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/c7782862956e3aa59eaeb6dcf80906c1fc063ae1.1763370931.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add struct intel_display_rps_interface to the display parent interface,
and call the RPS functions through it. The RPS interface is optional.
v2: s/boost/boost_if_not_started/ and keep comment in caller (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/6a6c4420d9f2d9a545ee6df4cad5fdc32a86636b.1763370931.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add .has_fenced_regions() to display parent interface, removing more
dependencies on struct drm_i915_private, i915_drv.h, and
gt/intel_gt_types.h.
This allows us to remove the xe compat gt/intel_gt_types.h.
v2: s/fence_support_legacy/has_fenced_regions/ (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/309f61a8742c3bf731c820b2f9e1024143db8598.1763370931.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add an irq parent driver interface for the .enabled and .synchronize
calls. This lets us drop the dependency on i915_drv.h and i915_irq.h in
multiple places, and subsequently remove the compat i915_irq.h and
i915_irq.c files along with the display/ext directory from xe
altogether.
Introduce new intel_parent.[ch] as the wrapper layer to chase the
function pointers and convert between generic and more specific display
types.
v2: Keep static wrappers in intel_display_irq.c (Ville)
v3: Full blown wrappers in intel_parent.[ch] (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/dd62dd52ef10d9ecf77da3bdf6a70f71193d141c.1763370931.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
drm-misc-next for v6.19:
UAPI Changes:
- Add sysfs entries, coredump support and uevents to QAIC.
- Add fdinfo memory statistics to ivpu.
Cross-subsystem Changes:
- Handle stub fence initialization during module init.
- Stop using system_wq in scheduler and drivers.
Core Changes:
- Documentation updates to ttm, vblank.
- Add EDID quirk for sharp panel.
- Use drm_crtc_vblank_(crtc,waitqueue) more in core and drivers.
Driver Changes:
- Small updates and fixes to panfrost, amdxdna, vmwgfx, ast, ivpu.
- Handle preemption in amdxdna.
- Add PM support to qaic.
- Huge refactor of sun4i's layer code to decouple plane code from output
and improve support for DE33.
- Add larger page and compression support to nouveau.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/1ad3ea69-d029-4a21-8b3d-6b264b1b2a30@linux.intel.com
Limit number of jobs per exec queue (Shuicheng)
Add sriov_admin sysfs tree (Michal)
Driver Changes:
Fix an uninitialized value (Thomas)
Expose a residency counter through debugfs (Mohammed Thasleem)
Workaround enabling and improvement (Tapani, Tangudu)
More Crescent Island-specific support (Sk Anirban, Lucas)
PAT entry dump improvement (Xin)
Inline gt_reset in the worker (Lucas)
Synchronize GT reset with device unbind (Balasubramani)
Do clean shutdown also when using flr (Jouni)
Fix serialization on burst of unbinds (Matt Brost)
Pagefault Refactor (Matt Brost)
Remove some unused code (Gwan-gyeong)
Avoid TOCTOU when montoring throttle reasons (Lucas)
Add/extend workaround (Nitin)
SRIOV migration work / plumbing (Michal Wajdeczko, Michal Winiarski, Lukasz)
Drop debug flag requirement for VF resource fixup
Fix MTL vm_max_level (Rodrigo)
Changes around TILE_ADDR_RANGE for platform compatibility
(Fei, Lucas)
Add runtime registers for GFX ver >= 35 (Piotr)
Kerneldoc fix (Kriish)
Rework pcode error mapping (Lucas)
Allow lockdown the PF (Michal)
Eliminate GUC code caching of some frequency values (Sk)
Improvements around forcewake referencing (Matt Roper)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCaRcIGwAKCRC4FpNVCsYG
v3VWAQD7eVdaBKgOUoyWexzeWiHeAEAe9QwgTdK71PBNHF1kIQEA3dg12QDETxFp
pWvOYie6bl+ApXx/JJ0OKtMeIFz2mQc=
=MS1G
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2025-11-14' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
Avoid TOCTOU when montoring throttle reasons (Lucas)
Add/extend workaround (Nitin)
SRIOV migration work / plumbing (Michal Wajdeczko, Michal Winiarski, Lukasz)
Drop debug flag requirement for VF resource fixup
Fix MTL vm_max_level (Rodrigo)
Changes around TILE_ADDR_RANGE for platform compatibility
(Fei, Lucas)
Add runtime registers for GFX ver >= 35 (Piotr)
Kerneldoc fix (Kriish)
Rework pcode error mapping (Lucas)
Allow lockdown the PF (Michal)
Eliminate GUC code caching of some frequency values (Sk)
Improvements around forcewake referencing (Matt Roper)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/aRcJOrisG2qPbucE@fedora
Extend struct dw_hdmi_qp_plat_data to include the supported display
output formats and maximum bits per color channel. When provided by the
platform driver, use them to setup the HDMI bridge accordingly.
Additionally, improve debug logging in dw_hdmi_qp_bridge_atomic_enable()
to also show the current HDMI output format and bpc.
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251021-rk3588-10bpc-v3-2-3d3eed00a6db@collabora.com
When INTEL_BMG_G21_IDS were added as a subplatform, token concatenation
operator usage was omitted, making INTEL_BMG_IDS not usable with
single-argument macros.
Fix that by adding the missing operator.
Fixes: 78de8f8766 ("drm/xe: Handle Wa_22010954014 and Wa_14022085890 as device workarounds")
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251112132220.516975-25-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
It is possible to force a specific version of python to be used when
building the kernel by passing PYTHON3= on the make command line.
However kernel-doc.py is currently called with python3 hard-coded and
thus ignores this setting.
Use $(PYTHON3) to run $(KERNELDOC) so that the desired version of
python is used.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://patch.msgid.link/20251107192933.2bfe9e57@endymion
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
drm-misc-next for v6.19-rc1:
UAPI Changes:
- Add userptr support to ivpu.
- Add IOCTL's for resource and telemetry data in amdxdna.
Core Changes:
- Improve some atomic state checking handling.
- drm/client updates.
- Use forward declarations instead of including drm_print.h
- RUse allocation flags in ttm_pool/device_init and allow specifying max
useful pool size and propagate ENOSPC.
- Updates and fixes to scheduler and bridge code.
- Add support for quirking DisplayID checksum errors.
Driver Changes:
- Assorted cleanups and fixes in rcar-du, accel/ivpu, panel/nv3052cf,
sti, imxm, accel/qaic, accel/amdxdna, imagination, tidss, sti,
panthor, vkms.
- Add Samsung S6E3FC2X01 DDIC/AMS641RW, Synaptics TDDI series DSI,
TL121BVMS07-00 (IL79900A) panels.
- Add mali MediaTek MT8196 SoC gpu support.
- Add etnaviv GC8000 Nano Ultra VIP r6205 support.
- Document powervr ge7800 support in the devicetree.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/5afae707-c9aa-4a47-b726-5e1f1aa7a106@linux.intel.com
drm/i915 feature pull for v6.19:
Features and functionality:
- Enable LNL+ content adaptive sharpness filter (CASF) (Nemesa)
- Use optimized VRR guardband (Ankit, Ville)
- Enable Xe3p LT PHY (Suraj)
- Enable FBC support for Xe3p_LPD display (Sai Teja, Vinod)
- Specify DMC firmware for display version 30.02 (Dnyaneshwar)
- Report reason for disabling PSR to debugfs (Michał)
- Extend i915_display_info with Type-C port details (Khaled)
- Log DSI send packet sequence errors and contents
Refactoring and cleanups:
- Refactoring to prepare for VRR guardband optimization (Ankit)
- Abstract VRR live status wait (Ankit)
- Refactor VRR and DSB timing to handle Set Context Latency explicitly (Ankit)
- Helpers for prefill latency calculations (Ville)
- Refactor SKL+ watermark latency setup (Ville)
- VRR refactoring and cleanups (Ville)
- SKL+ universal plane cleanups (Ville)
- Decouple CDCLK from state->modeset refactor (Ville)
- Refactor VLV/CHV clock functions (Jani)
- Refactor fbdev handling (Jani)
- Call i915 and xe runtime PM from display via function pointers (Jouni)
- IRQ code refactoring (Jani)
- Drop display dependency on i915 feature check macros (Jani)
- Refactor and unify i915 and xe stolen memory interfaces towards display (Jani)
- Switch to driver agnostic drm to display pointer chase (Jani)
- Use display version over graphics version in display code (Matt A)
- GVT cleanups (Jonathan, Andi)
- Rename a VLV clock function to unify (Michał)
- Explicitly sanitize DMC package header num entries (Luca)
- Remove redundant port clock check from ALPM (Jouni)
- Use sysfs_emit() instead of sprintf() in PMU sysfs (Madhur Kumar)
- Clean up C20 PHY PLL register macros (Imre, Mika))
- Abstract "address in MMIO table" helper for general use (Matt A)
- Improve VRR platform abstractions (Ville)
- Move towards more standard PCI PM code usage (Ville)
- Framebuffer refactoring (Ville)
- Drop display dependency on i915_utils.h (Jani)
- Include cleanups (Jani)
Fixes:
- Workaround docking station DSC issues with high pixel clock and bpp (Imre)
- Fix Panel Replay in DSC mode (Imre)
- Disable tracepoints for PREEMPT_RT as a workaround (Maarten)
- Fix intel_crtc_get_vblank_counter() on PREEMPT_RT (Maarten)
- Fix C10 PHY identification on PTL/WCL (Dnyaneshwar)
- Take AS SDP into account with optimized guardband (Jouni)
- Fix panic structure allocation memory leak (Jani)
- Adjust an FBC workaround platforms (Vinod)
- Add fallback for CDCLK selection (Naladala)
- Avoid using invalid transcoder in MST transport select (Suraj)
- Don't use cursor size reduction on display version 14+ (Nemesa)
- Fix C20 PHY PLL register programming (Imre, Mika)
- Fix PSR frontbuffer flush handling (Jouni)
- Store ALPM parameters in crtc state (Jouni)
- Defeature DRRS on LNL+ (Ville)
- Fix the scope of the large DRAM DIMM workaround (Ville)
- Fix PICA vs. AUX power ordering issue (Gustavo)
- Fix pixel rate for computing watermark line time (Ville)
- Fix framebuffer set_tiling vs. addfb race (Ville)
- DMC event handler fixes (Ville)
DRM Core:
- CRTC sharpness strength property (Nemesa)
- DPCD DSC quirk for Synaptics Panamera devices (Imre)
- Helpers to query the branch DSC max throughput/line-width (Imre)
Merges:
- Backmerge drm-next for v6.18-rc and to sync with drm-xe-next (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/ec5a05f2df6d597a62033ee2d57225cce707b320@intel.com
We have differing implementations for display runtime pm in i915 and xe
drivers. Add struct of function pointers into display_parent_interface
which will contain used implementation of runtime pm.
v2:
- add _interface suffix to rpm function pointer struct
- add struct ref_tracker forward declaration
- use kernel-doc comments
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patch.msgid.link/20251030202836.1815680-3-jouni.hogander@intel.com
Let's gradually start calling i915 and xe parent, or core, drivers from
display via function pointers passed at display probe.
Going forward, the struct intel_display_parent_interface is expected to
include const pointers to sub-structs by functionality, for example:
struct intel_display_rpm {
struct ref_tracker *(*get)(struct drm_device *drm);
/* ... */
};
struct intel_display_parent_interface {
/* ... */
const struct intel_display_rpm *rpm;
};
This is a baby step towards not building display as part of both i915
and xe drivers, but rather making it an independent driver interfacing
with the two.
v3: useless include additions dropped
v2: unrelated include removal dropped
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patch.msgid.link/20251030202836.1815680-2-jouni.hogander@intel.com
More xe3p support (Harish, Brian, Balasubramani, Matt Roper)
Make panic support work on VRAM for display (Maarten)
Fix stolen size check (Shuicheng)
xe_pci_test update (Gustavo)
VF migration updates (Tomasz)
A couple of fixes around allocation and PM references (Matt Brost)
Migration update for the MEM_COPY instruction (Matt Auld)
Initial CRI support (Balasubramani, Matt Roper)
Use SVM range helpers in PT layer (Matt Brost)
Drop MAX_GT_TYPE_CHARS constant (Matt Roper)
Fix spelling and typos (Sanjay)
Fix VF FLR synchronization between all GTs (Michal)
Add a Workaround (Nitin)
Access VF's register using dedicated MMIO view (Michal)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCaQClhwAKCRC4FpNVCsYG
v88YAQC7cmRpHNEaTPTSBHAtVzMfEG+4b6JWjXAbuhQzd6MZgwD/SXOO2xSc66ks
JFHMzpAi/W1d3UVuj/QiN4PL3NTsjQA=
=L+1S
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2025-10-28' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
More xe3p support (Harish, Brian, Balasubramani, Matt Roper)
Make panic support work on VRAM for display (Maarten)
Fix stolen size check (Shuicheng)
xe_pci_test update (Gustavo)
VF migration updates (Tomasz)
A couple of fixes around allocation and PM references (Matt Brost)
Migration update for the MEM_COPY instruction (Matt Auld)
Initial CRI support (Balasubramani, Matt Roper)
Use SVM range helpers in PT layer (Matt Brost)
Drop MAX_GT_TYPE_CHARS constant (Matt Roper)
Fix spelling and typos (Sanjay)
Fix VF FLR synchronization between all GTs (Michal)
Add a Workaround (Nitin)
Access VF's register using dedicated MMIO view (Michal)
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/aQCl9uJxN6CWJ8Vg@fedora
Some graphics APIs differentiate between out-of-graphics-memory and
out-of-host-memory (system memory). Add a device init flag to have -ENOSPC
propagated from the resource managers instead of being converted to
-ENOMEM, to aid driver stacks in determining what error code to return or
whether corrective action can be taken at the driver level.
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20251020115411.36818-7-tvrtko.ursulin@igalia.com
GPUs typically benefit from contiguous memory via reduced TLB pressure and
improved caching performance, where the maximum size of contiguous block
which adds a performance benefit is related to hardware design.
TTM pool allocator by default tries (hard) to allocate up to the system
MAX_PAGE_ORDER blocks. This varies by the CPU platform and can also be
configured via Kconfig.
If that limit was set to be higher than the GPU can make an extra use of,
lets allow the individual drivers to let TTM know over which allocation
order can the pool allocator afford to make a little bit less effort with.
We implement this by disabling direct reclaim for those allocations, which
reduces the allocation latency and lowers the demands on the page
allocator, in cases where expending this effort is not critical for the
GPU in question.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20251020115411.36818-5-tvrtko.ursulin@igalia.com
Multiple consecutive boolean function arguments are usually not very
readable.
Replace the ones in ttm_device_init() with flags with the additional
benefit of soon being able to pass in more data with just a one off
code base churning cost.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sui Jingfeng <suijingfeng@loongson.cn>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Zack Rusin <zack.rusin@broadcom.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> # For xe
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20251020115411.36818-4-tvrtko.ursulin@igalia.com
[tursulin: fixup checkpatch while applying]
Multiple consecutive boolean function arguments are usually not very
readable.
Replace the ones in ttm_pool_init() with flags with the additional
benefit of soon being able to pass in more data with just this one
code base churning cost.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20251020115411.36818-3-tvrtko.ursulin@igalia.com
The ttm/ttm_resource.h header does not really need anything from
drm_print.h. A simple forward declaration for struct drm_printer is
sufficient.
An explicit drm_print.h include has previously been added to all the
files that indirectly depended on this include.
v3: Only remove the include here (Thomas)
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/cfdb1095033112c2a7e58767481c98929984a33c.1761734313.git.jani.nikula@intel.com
The drm_mm.h header does not really need anything from drm_print.h. A
simple forward declaration for struct drm_printer is sufficient.
An explicit drm_print.h include has previously been added to all the
files that indirectly depended on this include.
v3: Only remove the include here (Thomas)
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/7d570ed1f0f0f14cac346bea50bce9ef02ddd166.1761734313.git.jani.nikula@intel.com
The drm_buddy.h header does not really need anything from drm_print.h. A
simple forward declaration for struct drm_printer is sufficient.
An explicit drm_print.h include has previously been added to all the
files that indirectly depended on this include.
v3: Only remove the include here (Thomas)
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/b303996b407fcbe2c7357bea036f79c45d6dae49.1761734313.git.jani.nikula@intel.com
Rename drm_client_framebuffer_flush() to drm_cient_buffer_flush() and
adapt its callers. The old name was left over from previous naming
conventions.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>>
Tested-by: Francesco Valla <francesco@valla.it>
Link: https://patch.msgid.link/20251027121042.143588-8-tzimmermann@suse.de
Rename drm_client_framebuffer_create() to drm_client_buffer_create_dump()
and adapt callers. The new name reflects the function's purpose. Using
dumb buffers is the easiest way for creating a GEM buffer in a drivers-
independent way.
There's also drm_client_buffer_create(), which creates the client buffer
from a preexisting buffer object. This helper can be exported for drivers
that create their own GEM buffer object.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Francesco Valla <francesco@valla.it>
Link: https://patch.msgid.link/20251027121042.143588-7-tzimmermann@suse.de
Release client buffers with drm_client_buffer_delete() instead of
drm_client_framebuffer_delete(). The latter is just a tiny wrapper
around the former.
Move the test for !buffer into drm_client_buffer_delete(), although
all callers appear to always have a valid pointer.
v2:
- test for !buffer before deref-ing pointer (Jocelyn, Dan)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Francesco Valla <francesco@valla.it>
Link: https://patch.msgid.link/20251027121042.143588-6-tzimmermann@suse.de
The client buffer's framebuffer holds a reference and pointer on
each of its GEM buffer objects. Thus the field gem in the client-
buffer struct is not necessary. Deprecated the field and convert
the client-buffer helpers to use the framebuffer's objects.
In drm_client_buffer_delete(), do a possible vunmap before releasing
the framebuffer. Otherwise we'd eventually release the framebuffer
before unmaping its buffer objects.
v2:
- avoid dependency on CONFIG_DRM_KMS_HELPER
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Francesco Valla <francesco@valla.it>
Link: https://patch.msgid.link/20251027121042.143588-5-tzimmermann@suse.de
Only the client-buffer setup uses the pitch field from struct
drm_client_buffer. Remove the field and pass the value among setup
helpers.
Clients that need the pitch should rather look at the framebuffer's
pitches[0] directly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Francesco Valla <francesco@valla.it>
Link: https://patch.msgid.link/20251027121042.143588-2-tzimmermann@suse.de
Introduce a new crtc property "SHARPNESS_STRENGTH" that allows
the user to set the intensity so as to get the sharpness effect.
The value of this property can be set from 0-255.
It is useful in scenario when the output is blurry and user
want to sharpen the pixels. User can increase/decrease the
sharpness level depending on the content displayed.
v2: Rename crtc property variable [Arun]
Add modeset detail in uapi doc[Uma]
v3: Fix build issue
v4: Modify the subject line[Ankit]
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Tested-by: Adarsh G M <Adarsh.g.m@intel.com>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://invent.kde.org/plasma/kwin/-/merge_requests/7689
Link: https://patch.msgid.link/20251028120747.3027332-2-ankit.k.nautiyal@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
drm_{crtc,plane,connector,private_obj}_get_state() must not
be called after the atomic check phase. At that point the commit
has been carved in stone and no new objects must be introduced
into it. WARN if anyone attempts to violate this rule.
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251017163327.9074-2-ville.syrjala@linux.intel.com
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Add free callback to struct drm_client_funcs. Invoke function to
free the client memory as part of the release process. Implement
free for fbdev emulation.
Fbdev emulation allocates and prepares client memory in
drm_fbdev_client_setup(). The release happens in fb_destroy from
struct fb_ops. Multiple implementations of this callback exist in
the various drivers that provide an fbdev implementation. Each of
them needs to follow the implementation details of the fbdev setup
code.
Adding a free callback for the client puts the unprepare and release
of the fbdev client in a single place.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> # core, msm
Acked-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> # omapdrm
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> # gma500
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20251009132006.45834-2-tzimmermann@suse.de
Add platform definition and PCI IDs for Crescent Island.
Other platforms use INTEL_VGA_DEVICE since they have a
PCI_BASE_CLASS_DISPLAY class. This is not the case for CRI, so just
match on devid, which should be sufficient.
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Link: https://lore.kernel.org/r/20251021-cri-v1-1-bf11e61d9f49@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
drm-misc-next for v6.19:
UAPI Changes:
Cross-subsystem Changes:
- fbcon cleanups.
- Make drivers depend on FB_TILEBLITTING instead of selecting it,
and hide FB_MODE_HELPERS.
Core Changes:
- More preparations for rust.
- Throttle dirty worker with vblank
- Use drm_for_each_bridge_in_chain_scoped in drm's bridge code and
assorted fixes.
- Ensure drm_client_modeset tests are enabled in UML.
- Rename ttm_bo_put to ttm_bo_fini, as a further step in removing the
TTM bo refcount.
- Add POST_LT_ADJ_REQ training sequence.
- Show list of removed but still allocated bridges.
- Add a simulated vblank interrupt for hardware without it,
and add some helpers to use them in vkms and hypervdrm.
Driver Changes:
- Assorted small fixes, cleanups and updates to host1x, tegra,
panthor, amdxdna, gud, vc4, ssd130x, ivpu, panfrost, panthor,
sysfb, bridge/sn65dsi86, solomon, ast, tidss.
- Convert drivers from using .round_rate() to .determine_rate()
- Add support for KD116N3730A07/A12, chromebook mt8189, JT101TM023,
LQ079L1SX01, raspberrypi 5" panels.
- Improve reclocking on tegra186+ with nouveau.
- Improve runtime pm in amdxdna.
- Add support for HTX_PAI in imx.
- Use a helper to calculate dumb buffer sizes in most drivers.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/b412fb91-8545-466a-8102-d89c0f2758a7@linux.intel.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmj1jhQeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGUdkH/2Op7+8+0Km+ytfk
5vhTAxg0TSCIxrlauUGKgilcye4hmROsorreRmtVi0Pzp6e+B0kp11tC5kRzgQLp
mVSKm5C41uBmpn9JphHSYSsTxprJClPIqGcOgXp0jLhvKu7JXdVFWAZDYYXGqLrV
+oWIjEms7KC+UBi5b3GYl/5Fr8zxU+v+iD96rd4xqxs8RpJs4Z5iynUpayZLDReR
sse6twmSmnQUo/Fs6fHpabfZ/ZWw13wzd5XD1nE05EiMrOjO3+UmDyDNes9QP/Pn
sRgfb8KUrhkEdgLcNJ0BcYszneKyS2+p0vyyJLEF/LsQCcv8rK74aTMxNRfvlz/c
7yz+fPI=
=qtmW
-----END PGP SIGNATURE-----
Merge tag 'v6.18-rc2' into 'drm-rust-next'
When pushing commits to drm-rust-next, we need to verify that the
patches pass rustfmt. Thus, pull in v6.18-rc2 for its rustfmt fix.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
When using GPUVM in immediate mode, it is necessary to call
drm_gpuvm_unlink() from the fence signalling critical path. However,
unlink may call drm_gpuvm_bo_put(), which causes some challenges:
1. drm_gpuvm_bo_put() often requires you to take resv locks, which you
can't do from the fence signalling critical path.
2. drm_gpuvm_bo_put() calls drm_gem_object_put(), which is often going
to be unsafe to call from the fence signalling critical path.
To solve these issues, add a deferred version of drm_gpuvm_unlink() that
adds the vm_bo to a deferred cleanup list, and then clean it up later.
The new methods take the GEMs GPUVA lock internally rather than letting
the caller do it because it also needs to perform an operation after
releasing the mutex again. This is to prevent freeing the GEM while
holding the mutex (more info as comments in the patch). This means that
the new methods can only be used with DRM_GPUVM_IMMEDIATE_MODE.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20251006-vmbo-defer-v4-1-30cbd2c05adb@google.com
[aliceryhl: fix formatting of vm_bo = llist_entry(...) line]
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
No caller of the client resume/suspend helpers holds the console
lock. The last such cases were removed from radeon in the patch
series at [1]. Now remove the related parameter and the TODO items.
v2:
- update placeholders for CONFIG_DRM_CLIENT=n
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/series/151624/ # [1]
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20251001143709.419736-1-tzimmermann@suse.de
Provide the basic platform definitions and PCI IDs for NVL-S.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251016-xe3p-v3-11-3dd173a3097a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Compute kernels often issue memory copies immediately after completion.
If the memory being copied is an SVM pointer that was faulted into the
device and then bound via userptr, it is undesirable to move that
memory. Worse, if userptr is mixed between system and device memory, the
bind operation may be rejected.
Xe already has the necessary plumbing to support userptr with mixed
mappings. This update modifies GPUSVM's get_pages to correctly locate
pages in such mixed mapping scenarios.
v2:
- Rebase (Thomas Hellström)
v3:
- Remove Fixes tag.
v4:
- Break out from series since the other patch was merged.
- Update patch subject, ensure dri-devel and Maarten are CC'd.
Cc: Maarten Lankhorst <maarten.lankhorst@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20251015120320.176338-1-thomas.hellstrom@linux.intel.com
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Currently the TIMER_BASE_CONFIG0 register gets initialized to a fixed
value as initially found in vendor driver code supporting the RK3588
SoC. As a matter of fact the value matches the rate of the HDMI TX
reference clock, which is roughly 428.57 MHz.
However, on RK3576 SoC that rate is slightly lower, i.e. 396.00 MHz, and
the incorrect register configuration breaks CEC functionality.
Set the timer base according to the actual reference clock rate that
shall be provided by the platform driver. Otherwise fallback to the
vendor default.
While at it, also drop the unnecessary empty lines in
dw_hdmi_qp_init_hw().
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250903-rk3588-hdmi-cec-v4-2-fa25163c4b08@collabora.com
Add support for the CEC interface of the Synopsys DesignWare HDMI QP TX
controller.
This is based on the downstream implementation, but rewritten on top of
the CEC helpers added recently to the DRM HDMI connector framework.
Also note struct dw_hdmi_qp_plat_data has been extended to include the
CEC IRQ number to be provided by the platform driver.
Co-developed-by: Algea Cao <algea.cao@rock-chips.com>
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
Co-developed-by: Derek Foreman <derek.foreman@collabora.com>
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250903-rk3588-hdmi-cec-v4-1-fa25163c4b08@collabora.com
The kernel-doc for struct drm_gpuvm_map_req.map was added as '@op_map'
instead of '@map', leading to this warning during htmldocs build:
WARNING: include/drm/drm_gpuvm.h:1083 struct member 'map' not described in 'drm_gpuvm_map_req'
Fixes: 000a45dce7 ("drm/gpuvm: Pass map arguments through a struct")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20250821133539.03aa298e@canb.auug.org.au/
Signed-off-by: Ankan Biswas <spyjetfayed@gmail.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
When Wa_22010954014 and Wa_14022085890 were first implemented, we didn't
have a device workaround infrastructure so we hacked them into the GT
workaround list. Now that we have proper device workaround support,
move them to the proper place. Note that Wa_14022085890 specifically
applies to BMG-G21 platforms, so this requires defining a BMG
subplatform to capture the correct subset of device IDs.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-40-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
The state pointer found in the struct drm_atomic_state internals for
most object is a bit ambiguous, and confusing when those internals also
have old state and new state.
After the recent cleanups, the state pointer only use is to point to the
state we need to free when destroying the atomic state.
We can thus rename it something less ambiguous, and hopefully more
meaningful.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20251008-drm-rename-state-v2-1-49b490b2676a@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Maintain two separate RB trees per order - one for clear (zeroed) blocks
and another for dirty (uncleared) blocks. This separation improves
code clarity and makes it more obvious which tree is being searched
during allocation. It also improves scalability and efficiency when
searching for a specific type of block, avoiding unnecessary checks
and making the allocator more predictable under fragmentation.
The changes have been validated using the existing drm_buddy_test
KUnit test cases, along with selected graphics workloads,
to ensure correctness and avoid regressions.
v2: Missed adding the suggested-by tag. Added it in v2.
v3(Matthew):
- Remove the double underscores from the internal functions.
- Rename the internal functions to have less generic names.
- Fix the error handling code.
- Pass tree argument for the tree macro.
- Use the existing dirty/free bit instead of new tree field.
- Make free_trees[] instead of clear_tree and dirty_tree for
more cleaner approach.
v4:
- A bug was reported by Intel CI and it is fixed by
Matthew Auld.
- Replace the get_root function with
&mm->free_trees[tree][order] (Matthew)
- Remove the unnecessary rbtree_is_empty() check (Matthew)
- Remove the unnecessary get_tree_for_flags() function.
- Rename get_tree_for_block() name with get_block_tree() for more
clarity.
v5(Jani Nikula):
- Don't use static inline in .c files.
- enum free_tree and enumerator names are quite generic for a header
and usage and the whole enum should be an implementation detail.
v6:
- Rewrite the __force_merge() function using the rb_last() and rb_prev().
v7(Matthew):
- Replace the open-coded tree iteration for loops with the
for_each_free_tree() macro throughout the code.
- Fixed out_free_roots to prevent double decrement of i,
addressing potential crash.
- Replaced enum drm_buddy_free_tree with unsigned int
in for_each_free_tree loops.
Cc: stable@vger.kernel.org
Fixes: a68c7eaa7a ("drm/amdgpu: Enable clear page functionality")
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4260
Link: https://lore.kernel.org/r/20251006095124.1663-2-Arunpravin.PaneerSelvam@amd.com
Replace the freelist (O(n)) used for free block management with a
red-black tree, providing more efficient O(log n) search, insert,
and delete operations. This improves scalability and performance
when managing large numbers of free blocks per order (e.g., hundreds
or thousands).
In the VK-CTS memory stress subtest, the buddy manager merges
fragmented memory and inserts freed blocks into the freelist. Since
freelist insertion is O(n), this becomes a bottleneck as fragmentation
increases. Benchmarking shows list_insert_sorted() consumes ~52.69% CPU
with the freelist, compared to just 0.03% with the RB tree
(rbtree_insert.isra.0), despite performing the same sorted insert.
This also improves performance in heavily fragmented workloads,
such as games or graphics tests that stress memory.
As the buddy allocator evolves with new features such as clear-page
tracking, the resulting fragmentation and complexity have grown.
These RB-tree based design changes are introduced to address that
growth and ensure the allocator continues to perform efficiently
under fragmented conditions.
The RB tree implementation with separate clear/dirty trees provides:
- O(n log n) aggregate complexity for all operations instead of O(n^2)
- Elimination of soft lockups and system instability
- Improved code maintainability and clarity
- Better scalability for large memory systems
- Predictable performance under fragmentation
v3(Matthew):
- Remove RB_EMPTY_NODE check in force_merge function.
- Rename rb for loop macros to have less generic names and move to
.c file.
- Make the rb node rb and link field as union.
v4(Jani Nikula):
- The kernel-doc comment should be "/**"
- Move all the rbtree macros to rbtree.h and add parens to ensure
correct precedence.
v5:
- Remove the inline in a .c file (Jani Nikula).
v6(Peter Zijlstra):
- Add rb_add() function replacing the existing rbtree_insert() code.
v7:
- A full walk iteration in rbtree is slower than the list (Peter Zijlstra).
- The existing rbtree_postorder_for_each_entry_safe macro should be used
in scenarios where traversal order is not a critical factor (Christian).
v8(Matthew):
- Remove the rbtree_is_empty() check in this patch as well.
Cc: stable@vger.kernel.org
Fixes: a68c7eaa7a ("drm/amdgpu: Enable clear page functionality")
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20251006095124.1663-1-Arunpravin.PaneerSelvam@amd.com
While the old and new state pointers are somewhat self-explanatory, the
state pointer and its relation to the other two really isn't.
Now that we've cleaned up everything and it isn't used in any
modesetting path, we can document what it's still useful for: to free
the right state when we free the global state.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-39-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
While the old and new state pointers are somewhat self-explanatory, the
state pointer and its relation to the other two really isn't.
Now that we've cleaned up everything and it isn't used in any
modesetting path, we can document what it's still useful for: to free
the right state when we free the global state.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-36-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The drm_atomic_get_existing_crtc_state() function is deprecated and
isn't used anymore, so let's remove it.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-35-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
While the old and new state pointers are somewhat self-explanatory, the
state pointer and its relation to the other two really isn't.
Now that we've cleaned up everything and it isn't used in any
modesetting path, we can document what it's still useful for: to free
the right state when we free the global state.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-9-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The __drm_atomic_get_current_plane_state() function tries to get and
return the existing plane state, and if it doesn't exist returns the one
stored in the drm_plane->state field.
Using the current nomenclature, it tries to get the existing plane state
with an ad-hoc implementation of drm_atomic_get_existing_plane_state(),
and falls back to either the old or new plane state, depending on
whether it is called before or after drm_atomic_helper_swap_state().
The existing plane state itself is deprecated, because it also changes
when swapping states from the new state to the old state.
Fortunately for us, we can simplify things. Indeed,
__drm_atomic_get_current_plane_state() is only used in two macros:
intel_atomic_crtc_state_for_each_plane_state and
drm_atomic_crtc_state_for_each_plane_state().
The intel variant is only used through the intel_wm_compute() function
that is only ever called in intel_crtc_atomic_check().
The generic variant is more widely used, and can be found in the malidp,
msm, tegra and vc4 drivers. All of these call sites though are during
atomic_check(), so we end up in the same situation than Intel's.
Thus, we only ever use the existing state as the new state, and
plane->state is always going to be the old state. Any plane isn't
guaranteed to be part of the state though, so we can't rely on
drm_atomic_get_old_plane_state() and we still need to use plane->state.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-4-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
While the old and new state pointers are somewhat self-explanatory, the
state pointer and its relation to the other two really isn't.
Now that we've cleaned up everything and it isn't used in any
modesetting path, we can document what it's still useful for: to free
the right state when we free the global state.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-3-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The drm_atomic_get_existing_connector_state() function is deprecated and
isn't used anymore, so let's remove it.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250930-drm-no-more-existing-state-v5-2-eeb9e1287907@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
When userptr is used on SVM-enabled VMs, a non-NULL
hmm_range::dev_private_owner value might mean that
hmm_range_fault() attempts to return device private pages.
Either that will fail, or the userptr code will not know
how to handle those.
Use NULL for hmm_range::dev_private_owner to migrate
such pages to system. In order to do that, move the
struct drm_gpusvm::device_private_page_owner field to
struct drm_gpusvm_ctx::device_private_page_owner so that
it doesn't remain immutable over the drm_gpusvm lifetime.
v2:
- Don't conditionally compile xe_svm_devm_owner().
- Kerneldoc xe_svm_devm_owner().
Fixes: 9e97874148 ("drm/xe/userptr: replace xe_hmm with gpusvm")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/20250930122752.96034-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit ad298d9ec9)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add helpers to query the DP DSC sink device's per-slice throughput as
well as a DSC branch device's overall throughput and line-width
capabilities.
v2 (Ville):
- Rename pixel_clock to peak_pixel_rate, document what the value means
in case of MST tiled displays.
- Fix name of drm_dp_dsc_branch_max_slice_throughput() to
drm_dp_dsc_sink_max_slice_throughput().
v3:
- Fix the DSC branch device minimum valid line width value from 2560
to 5120 pixels.
- Fix drm_dp_dsc_sink_max_slice_throughput()'s pixel_clock parameter
name to peak_pixel_rate in header file.
- Add handling for throughput mode 0 granular delta, defined by DP
Standard v2.1a.
v4:
- Remove the default switch case in
drm_dp_dsc_sink_max_slice_throughput(), which is unreachable in the
current code. (Ville)
Cc: dri-devel@lists.freedesktop.org
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-and-tested-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250930182450.563016-3-imre.deak@intel.com
Some Synaptics MST branch devices have a problem decompressing a stream
with a compressed link-bpp higher than 12, if the pixel clock is higher
than ~50 % of the maximum throughput capability reported by the branch
device. The screen remains blank, or for some - mostly black content -
gets enabled, but may stil have jitter artifacts.
At least the following docking stations are affected, based on testing
both with any Intel devices or the UCD-500 reference device as a source:
- DELL WD19DCS, DELL WD19TB3, DELL WD22TB4
- ThinkPad 40AN
- HP G2
At least the following docking stations are free from this problem,
based on tests with a source/sink/mode etc. configuration matching the
test cases used above:
- DELL Dual Charge HD22Q, DELL WD25TB5
- ThinkPad 40B0
- Anker 565
All the affected devices have an older version of the Synaptics MST
branch device (Panamera), whereas all the non-affected docking stations
have a newer branch device (at least Synaptics Panamera with a higher HW
revision number and Synaptics Cayenne models). Add the required quirk
entries accordingly. The quirk will be handled by the i915/xe drivers in
a follow-up change.
The latest firmware version of the Synaptics branch device for all the
affected devices tested above is 5.7 (as reported at DPCD address
0x50a/0x50b). For the DELL devices this corresponds to the latest
01.00.14.01.A03 firmware package version of the docking station.
v2:
- Document the DP_DPCD_QUIRK_DSC_THROUGHPUT_BPP_LIMIT enum.
- Describe the quirk in more detail in the dpcd_quirk_list.
v3:
- s/Panarema/Panamera in the commit log.
Cc: dri-devel@lists.freedesktop.org
Reported-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reported-and-tested-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250930182450.563016-2-imre.deak@intel.com
When userptr is used on SVM-enabled VMs, a non-NULL
hmm_range::dev_private_owner value might mean that
hmm_range_fault() attempts to return device private pages.
Either that will fail, or the userptr code will not know
how to handle those.
Use NULL for hmm_range::dev_private_owner to migrate
such pages to system. In order to do that, move the
struct drm_gpusvm::device_private_page_owner field to
struct drm_gpusvm_ctx::device_private_page_owner so that
it doesn't remain immutable over the drm_gpusvm lifetime.
v2:
- Don't conditionally compile xe_svm_devm_owner().
- Kerneldoc xe_svm_devm_owner().
Fixes: 9e97874148 ("drm/xe/userptr: replace xe_hmm with gpusvm")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/20250930122752.96034-1-thomas.hellstrom@linux.intel.com
Implement atomic_flush, atomic_enable and atomic_disable of struct
drm_crtc_helper_funcs for vblank handling. Driver with no further
requirements can use these functions instead of adding their own.
Also simplifies the use of vblank timers.
The code has been adopted from vkms, which added the funtionality
in commit 3a0709928b ("drm/vkms: Add vblank events simulated by
hrtimers").
v3:
- mention vkms (Javier)
v2:
- fix docs
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250916083816.30275-3-tzimmermann@suse.de
The vblank timer simulates a vblank interrupt for hardware without
support. Rate-limits the display update frequency.
DRM drivers for hardware without vblank support apply display updates
ASAP. A vblank event informs DRM clients of the completed update.
Userspace compositors immediately schedule the next update, which
creates significant load on virtualization outputs. Display updates
are usually fast on virtualization outputs, as their framebuffers are
in regular system memory and there's no hardware vblank interrupt to
throttle the update rate.
The vblank timer is a HR timer that signals the vblank in software.
It limits the update frequency of a DRM driver similar to a hardware
vblank interrupt. The timer is not synchronized to the actual vblank
interval of the display.
The code has been adopted from vkms, which added the funtionality
in commit 3a0709928b ("drm/vkms: Add vblank events simulated by
hrtimers").
The new implementation is part of the existing vblank support,
which sets up the timer automatically. Drivers only have to start
and cancel the vblank timer as part of enabling and disabling the
CRTC. The new vblank helper library provides callbacks for struct
drm_crtc_funcs.
The standard way for handling vblank is to call drm_crtc_handle_vblank().
Drivers that require additional processing, such as vkms, can init
handle_vblank_timeout in struct drm_crtc_helper_funcs to refer to
their timeout handler.
There's a possible deadlock between drm_crtc_handle_vblank() and
hrtimer_cancel(). [1] The implementation avoids to call hrtimer_cancel()
directly and instead signals to the timer function to not restart
itself.
v4:
- fix possible race condition between timeout and atomic commit (Michael)
v3:
- avoid deadlock when cancelling timer (Ville, Lyude)
v2:
- implement vblank timer entirely in vblank helpers
- downgrade overrun warning to debug
- fix docs
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/all/20250510094757.4174662-1-zengheng4@huawei.com/ # [1]
Link: https://lore.kernel.org/r/20250916083816.30275-2-tzimmermann@suse.de
Add drm_modes_size_dumb(), a helper to calculate the dumb-buffer
scanline pitch and allocation size. Implementations of struct
drm_driver.dumb_create can call the new helper for their size
computations.
There is currently quite a bit of code duplication among DRM's
memory managers. Each calculates scanline pitch and buffer size
from the given arguments, but the implementations are inconsistent
in how they treat alignment and format support. Later patches will
unify this code on top of drm_mode_size_dumb() as much as possible.
drm_mode_size_dumb() uses existing 4CC format helpers to interpret
the given color mode. This makes the dumb-buffer interface behave
similar the kernel's video= parameter. Current per-driver implementations
again likely have subtle differences or bugs in how they support color
modes.
The dumb-buffer UAPI is only specified for known color modes. These
values describe linear, single-plane RGB color formats or legacy index
formats. Other values should not be specified. But some user space
still does. So for unknown color modes, there are a number of known
exceptions for which drm_mode_size_dumb() calculates the pitch from
the bpp value, as before. All other values work the same but print
an error.
v6:
- document additional use cases for DUMB_CREATE2 in TODO list (Tomi)
- fix typos in documentation (Tomi)
v5:
- check for overflows with check_mul_overflow() (Tomi)
v4:
- use %u conversion specifier (Geert)
- list DRM_FORMAT_Dn in UAPI docs (Geert)
- avoid dmesg spamming with drm_warn_once() (Sima)
- add more information about bpp special case (Sima)
- clarify parameters for hardware alignment
- add a TODO item for DUMB_CREATE2
v3:
- document the UAPI semantics
- compute scanline pitch from for unknown color modes (Andy, Tomi)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250821081918.79786-3-tzimmermann@suse.de
The display driver needs to get from the struct drm_device pointer to
the struct intel_display pointer. Currently, this depends on knowledge
of the struct drm_i915_private and struct xe_device definitions, but
we'd like to hide those definitions from display.
Require the struct drm_device and struct intel_display * members within
struct drm_i915_private and struct xe_device to be placed next to each
other, to be able to figure out the display pointer without knowledge of
the structures.
Use a generic dummy device structure to define the relative offsets of
the drm and display members, and add static assertions to ensure this
holds for both i915 and xe. Use the dummy structure to do the pointer
chase from struct drm_device * to struct intel_display *.
This requires moving the display member in struct xe_device after the
drm member.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Suggested-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250926111032.1188876-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The HDMI TX Parallel Audio Interface (HTX_PAI) is a digital module that
acts as the bridge between the Audio Subsystem to the HDMI TX Controller.
This IP block is found in the HDMI subsystem of the i.MX8MP SoC.
Data received from the audio subsystem can have an arbitrary component
ordering. The HTX_PAI block has integrated muxing options to select which
sections of the 32-bit input data word will be mapped to each IEC60958
field. The HTX_PAI_FIELD_CTRL register contains mux selects to
individually select P,C,U,V,Data, and Preamble.
Use component helper so that imx8mp-hdmi-tx will be aggregate driver,
imx8mp-hdmi-pai will be component driver, then imx8mp-hdmi-pai can use
bind() ops to get the plat_data from imx8mp-hdmi-tx device.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20250923053001.2678596-6-shengjiu.wang@nxp.com
Add API dw_hdmi_set_sample_iec958() for IEC958 format because audio device
driver needs IEC958 information to configure this specific setting.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Liu Ying <victor.liu@nxp.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20250923053001.2678596-5-shengjiu.wang@nxp.com
Add API dw_hdmi_to_plat_data() to fetch plat_data because audio device
driver needs it to enable(disable)_audio().
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Liu Ying <victor.liu@nxp.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20250923053001.2678596-4-shengjiu.wang@nxp.com
To form the WCL platform as a subplatform of PTL in definition,
WCL pci ids are splited into saparate group from PTL.
So update the pciidlist struct to cover all the pci ids.
v2:
- Squash wcl description in single patch for display and xe.(jani,gustavo)
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250922150317.2334680-2-dnyaneshwar.bhadane@intel.com
The function is unused; remove it.
Instead of relying on a general blit helper, drivers should pick a blit
function by themselves from their list of supported color formats.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250918154207.84714-4-tzimmermann@suse.de
- Drop L3 bank mask reporting from the media GT on Xe3 and later. Only
do that for the primary GT. No userspace needs or uses it for media
and some platforms may report bogus values.
- Add SLPC power_profile sysfs interface with support for base and
power_saving modes (Vinay Belgaumkar, Rodrigo Vivi)
- Add configfs attributes to add post/mid context-switch commands
(Lucas De Marchi)
Cross-subsystem Changes:
- Fix hmm_pfn_to_map_order() usage in gpusvm and refactor APIs to
align with pieces previous handled by xe_hmm (Matthew Auld)
Core Changes:
- Add MEI driver for Late Binding Firmware Update/Upload
(Alexander Usyskin)
Driver Changes:
- Fix GuC CT teardown wrt TLB invalidation (Satyanarayana)
- Fix CCS save/restore on VF (Satyanarayana)
- Increase default GuC crash buffer size (Zhanjun)
- Allow to clear GT stats in debugfs to aid debugging (Matthew Brost)
- Add more SVM GT stats to debugfs (Matthew Brost)
- Fix error handling in VMA attr query (Himal)
- Move sa_info in debugfs to be per tile (Michal Wajdeczko)
- Limit number of retries upon receiving NO_RESPONSE_RETRY from GuC to
avoid endless loop (Michal Wajdeczko)
- Fix configfs handling for survivability_mode undoing user choice when
unbinding the module (Michal Wajdeczko)
- Refactor configfs attribute visibility to future-proof it and stop
exposing survivability_mode if not applicable (Michal Wajdeczko)
- Constify some functions (Harish Chegondi, Michal Wajdeczko)
- Add/extend more HW workarounds for Xe2 and Xe3
(Harish Chegondi, Tangudu Tilak Tirumalesh)
- Replace xe_hmm with gpusvm (Matthew Auld)
- Improve fake pci and WA kunit handling for testing new platforms
(Michal Wajdeczko)
- Reduce unnecessary PTE writes when migrating (Sanjay Yadav)
- Cleanup GuC interface definitions and log message (John Harrison)
- Small improvements around VF CCS (Michal Wajdeczko)
- Enable bus mastering for the I2C controller (Raag Jadav)
- Prefer devm_mutex of hand rolling it (Christophe JAILLET)
- Drop sysfs and debugfs attributes not available for VF (Michal Wajdeczko)
- GuC CT devm actions improvements (Michal Wajdeczko)
- Recommend new GuC versions for PTL and BMG (Julia Filipchuk)
- Improveme driver handling for exhaustive eviction using new
xe_validation wrapper around drm_exec (Thomas Hellström)
- Add and use printk wrappers for tile and device (Michal Wajdeczko)
- Better document workaround handling in Xe (Lucas De Marchi)
- Improvements on ARRAY_SIZE and ERR_CAST usage (Lucas De Marchi,
Fushuai Wang)
- Align CSS firmware headers with the GuC APIs (John Harrison)
- Test GuC to GuC (G2G) communication to aid debug in pre-production
firmware (John Harrison)
- Bail out driver probing if GuC fails to load (John Harrison)
- Allow error injection in xe_pxp_exec_queue_add()
(Daniele Ceraolo Spurio)
- Minor refactors in xe_svm (Shuicheng Lin)
- Fix madvise ioctl error handling (Shuicheng Lin)
- Use attribute groups to simplify sysfs registration
(Michal Wajdeczko)
- Add Late Binding Firmware implementation in Xe to work together with
the MEI component (Badal Nilawar, Daniele Ceraolo Spurio, Rodrigo
Vivi)
- Fix build with CONFIG_MODULES=n (Lucas De Marchi)
-----BEGIN PGP SIGNATURE-----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=2NXV
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2025-09-19' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Drop L3 bank mask reporting from the media GT on Xe3 and later. Only
do that for the primary GT. No userspace needs or uses it for media
and some platforms may report bogus values.
- Add SLPC power_profile sysfs interface with support for base and
power_saving modes (Vinay Belgaumkar, Rodrigo Vivi)
- Add configfs attributes to add post/mid context-switch commands
(Lucas De Marchi)
Cross-subsystem Changes:
- Fix hmm_pfn_to_map_order() usage in gpusvm and refactor APIs to
align with pieces previous handled by xe_hmm (Matthew Auld)
Core Changes:
- Add MEI driver for Late Binding Firmware Update/Upload
(Alexander Usyskin)
Driver Changes:
- Fix GuC CT teardown wrt TLB invalidation (Satyanarayana)
- Fix CCS save/restore on VF (Satyanarayana)
- Increase default GuC crash buffer size (Zhanjun)
- Allow to clear GT stats in debugfs to aid debugging (Matthew Brost)
- Add more SVM GT stats to debugfs (Matthew Brost)
- Fix error handling in VMA attr query (Himal)
- Move sa_info in debugfs to be per tile (Michal Wajdeczko)
- Limit number of retries upon receiving NO_RESPONSE_RETRY from GuC to
avoid endless loop (Michal Wajdeczko)
- Fix configfs handling for survivability_mode undoing user choice when
unbinding the module (Michal Wajdeczko)
- Refactor configfs attribute visibility to future-proof it and stop
exposing survivability_mode if not applicable (Michal Wajdeczko)
- Constify some functions (Harish Chegondi, Michal Wajdeczko)
- Add/extend more HW workarounds for Xe2 and Xe3
(Harish Chegondi, Tangudu Tilak Tirumalesh)
- Replace xe_hmm with gpusvm (Matthew Auld)
- Improve fake pci and WA kunit handling for testing new platforms
(Michal Wajdeczko)
- Reduce unnecessary PTE writes when migrating (Sanjay Yadav)
- Cleanup GuC interface definitions and log message (John Harrison)
- Small improvements around VF CCS (Michal Wajdeczko)
- Enable bus mastering for the I2C controller (Raag Jadav)
- Prefer devm_mutex of hand rolling it (Christophe JAILLET)
- Drop sysfs and debugfs attributes not available for VF (Michal Wajdeczko)
- GuC CT devm actions improvements (Michal Wajdeczko)
- Recommend new GuC versions for PTL and BMG (Julia Filipchuk)
- Improveme driver handling for exhaustive eviction using new
xe_validation wrapper around drm_exec (Thomas Hellström)
- Add and use printk wrappers for tile and device (Michal Wajdeczko)
- Better document workaround handling in Xe (Lucas De Marchi)
- Improvements on ARRAY_SIZE and ERR_CAST usage (Lucas De Marchi,
Fushuai Wang)
- Align CSS firmware headers with the GuC APIs (John Harrison)
- Test GuC to GuC (G2G) communication to aid debug in pre-production
firmware (John Harrison)
- Bail out driver probing if GuC fails to load (John Harrison)
- Allow error injection in xe_pxp_exec_queue_add()
(Daniele Ceraolo Spurio)
- Minor refactors in xe_svm (Shuicheng Lin)
- Fix madvise ioctl error handling (Shuicheng Lin)
- Use attribute groups to simplify sysfs registration
(Michal Wajdeczko)
- Add Late Binding Firmware implementation in Xe to work together with
the MEI component (Badal Nilawar, Daniele Ceraolo Spurio, Rodrigo
Vivi)
- Fix build with CONFIG_MODULES=n (Lucas De Marchi)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/c2et6dnkst2apsgt46dklej4nprqdukjosb55grpaknf3pvcxy@t7gtn3hqtp6n
Add small helpers (drm_dp_post_lt_adj_req_supported() and
drm_dp_post_lt_adj_req_in_progress()) to help with implementing
the POST_LT_ADJ_REQ sequence.
Tested-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250718120154.15492-3-ville.syrjala@linux.intel.com
Introduce a new MEI client driver to support Late Binding firmware
upload/update for Intel discrete graphics platforms.
Late Binding is a runtime firmware upload/update mechanism that allows
payloads, such as fan control and voltage regulator, to be securely
delivered and applied without requiring SPI flash updates or
system reboots. This driver enables the Xe graphics driver and other
user-space tools to push such firmware blobs to the authentication
firmware via the MEI interface.
The driver handles authentication, versioning, and communication
with the authentication firmware, which in turn coordinates with
the PUnit/PCODE to apply the payload.
This is a foundational component for enabling dynamic, secure,
and re-entrant configuration updates on platforms like Battlemage.
Cc: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250905154953.3974335-3-badal.nilawar@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Function drm_sched_entity_do_release() has been renamed in
commit 180fc134d7 ("drm/scheduler: Rename cleanup functions v2.").
Refer to the correct function in the documentation.
Signed-off-by: Luc Ma <onion0709@gmail.com>
[phasta: commit message]
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250915132327.6293-1-onion0709@gmail.com
Give TTM BOs a separate cleanup function.
No funktional change, but the next step in removing the TTM BO reference
counting and replacing it with the GEM object reference counting.
v2: move the code around a bit to make it clearer what's happening
v3: fix nouveau_bo_fini as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250909144311.1927-1-christian.koenig@amd.com
drm_for_each_bridge_in_chain() iterates ofer the bridges in an encoder
chain without protecting the lifetime of the bridges using
drm_bridge_get/put(). This creates a risk window where the bridge could be
freed while iterating on it. Users of drm_for_each_bridge_in_chain() cannot
solve this reliably.
Add variant of drm_for_each_bridge_in_chain() that gets/puts the bridge
reference at the beginning/end of each iteration, and puts it if breaking
ot of the loop.
Note that this requires adding a new drm_bridge_get_next_bridge_and_put()
function because, unlike similar functions as __of_get_next_child(),
drm_bridge_get_next_bridge() gets the "next" pointer but does not put the
"prev" pointer. Unfortunately drm_bridge_get_next_bridge() cannot be
modified to put the "prev" pointer because some of its users rely on
this, such as drm_atomic_bridge_propagate_bus_flags().
Also deprecate drm_for_each_bridge_in_chain(), in preparation for removing
it after converting all users to the scoped version.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250808-drm-bridge-alloc-getput-for_each_bridge-v2-3-edb6ee81edf1@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Before updating the display from the console's shadow buffer, the dirty
worker now waits for a vblank. This allows several screen updates to pile
up and acts as a rate limiter. If a DRM master is present, it could
interfere with the vblank. Don't wait in this case.
v4:
* share code with WAITFORVSYNC ioctl (Emil)
* use lock guard
v3:
* add back helper->lock
* acquire DRM master status while waiting for vblank
v2:
* don't hold helper->lock while waiting for vblank
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20250829091447.46719-1-tzimmermann@suse.de
Add support for Exynos7870's DSIM IP block in the bridge driver.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Presently, all devices refer to clock names from a single array. The
only controlling parameter is the number of clocks (num_clks field of
samsung_dsim_driver_data) which uses the first n clocks of that array.
As new devices are added, this approach turns out to be cumbersome.
Separate the clock names in individual arrays required by each variant,
in a struct clk_bulk_data. Add a pointer field to the driver data struct
which points to their respective clock names, and rework the clock usage
code to use the clk_bulk_* API instead.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The PLL_STABLE bit of DSIM_DPHY_STATUS is hardcoded to BIT(31), but
Exynos7870's DSIM has it in BIT(24) as per downstream kernel sources.
In order to support both, move this bit value to the driver data struct
and define it for every driver compatible. Reference the value from
there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Currently, PLL_P offset of DSIM_PLLCTRL is configurable in the driver
data, while PLL_M and PLL_S offsets are hardcoded as 4-bit and 1-bit
offsets respectively, but Exynos7870's DSIM have them at 3-bit and 0-bit
offsets as per downstream kernel sources.
In order to support both, move both offset values to the driver data
struct and define it for every driver compatible. Reference the values
from there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The VIDEO_MODE bit of DSIM_CONFIG is hardcoded to BIT(25), but
Exynos7870's DSIM has it in BIT(18) as per downstream kernel sources.
In order to support both, move this bit value to the driver data struct
and define it for every driver compatible. Reference the value from
there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The MAIN_VSA offset of DSIM_MSYNC is hardcoded to a 22-bit offset, but
Exynos7870's DSIM has it in a 16-bit offset as per the downstream kernel
sources.
In order to support both, move this offset value to the driver data
struct and define it for every driver compatible. Reference the value
from there instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
DSIM_CLKCTRL bit and offset values hardcoded in the driver:
name | bit/offset value
--------------------------+-----------------
DSIM_LANE_ESC_CLK_EN_CLK | 19
DSIM_LANE_ESC_CLK_EN_DATA | 20
DSIM_BYTE_CLKEN | 24
DSIM_ESC_CLKEN | 28
DSIM_TX_REQUEST_HSCLK | 31
DSIM_CLKCTRL bit and offset values in Exynos7870 DSIM as per downstream
kernel sources:
name | bit/offset value
--------------------------+-----------------
DSIM_LANE_ESC_CLK_EN_CLK | 8
DSIM_LANE_ESC_CLK_EN_DATA | 9
DSIM_BYTE_CLKEN | 17
DSIM_ESC_CLKEN | 16
DSIM_TX_REQUEST_HSCLK | 20
In order to support both, move all values to the driver data struct and
define it for every driver compatible. Reference the values from there
instead, in functions wherever required.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Exynos7870's DSIM device doesn't require waiting for the header FIFO
during a MIPI DSI transfer. Add a flag in the driver data in order to
control said behavior.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com
On Exynos7870 devices, enabling the display requires disabling
standby by writing to the SFRCTRL register. Add the register and related
bit values. Since this behavior isn't available on other SoCs, implement
a flag in the driver data struct indicating the availability of this
feature.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Exynos7870's DSIM has separate registers for LINK and DPHY status. This
is in contrast to older variants in the driver which use a single
register for both.
Add a driver data flag which indicates that the device variant supports
the legacy status register. Change the register read calls
appropriately.
Suggested-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmjHMcoeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG5bwH/23w8iGB4hf7L/7Z
e7blX42Pe9EXA1uK62iWmwEjDvBuJ7TmVfXH09qYJ56fj6/rJEdpQwtBMd4ypL81
QA/7lq5UEl0apPzMN86J8EHCzmjNzv7o+UtEd4C/hPFEZHZJa5Hqj9CBglSwSCEn
fTkLk7Gl6s8SfzBQ/rXX6/ZChAB/RleVWabDlIQMDz++/+9DZ0aqphj+5bYSqysL
ROQOaj4LOICuLfrup9J61hKNBoF7Dv3sO20vc+Iic0XHRPZ6/lKCnHgCUsqVIOOQ
L4kDT7XKQg+n3ttjrMe84/8iHZdWtf8VMWrtniPT8e1YGYuMpavVplgIcFoFCoNm
Qa7NPDs=
=rZeT
-----END PGP SIGNATURE-----
Merge tag 'v6.17-rc6' into drm-next
This is a backmerge of Linux 6.17-rc6, needed for msm,
also requested by misc.
Signed-off-by: Dave Airlie <airlied@redhat.com>
At the moment, the way that we currently free gem shmem objects is not
ideal for rust bindings. drm_gem_shmem_free() releases all of the
associated memory with a gem shmem object with kfree(), which means that
for us to correctly release a gem shmem object in rust we have to manually
drop all of the contents of our gem object structure in-place by hand
before finally calling drm_gem_shmem_free() to release the shmem resources
and the allocation for the gem object.
Since the only reason this is an issue is because of drm_gem_shmem_free()
calling kfree(), we can fix this by splitting drm_gem_shmem_free() out into
itself and drm_gem_shmem_release(), where drm_gem_shmem_release() releases
the various gem shmem resources without freeing the structure itself. With
this, we can safely re-acquire the KBox for the gem object's memory
allocation and let rust handle cleaning up all of the other struct members
automatically.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250911230147.650077-3-lyude@redhat.com
With gem objects in rust, the most ideal way for us to be able to handle
gem shmem object creation is to be able to handle the memory allocation of
a gem object ourselves - and then have the DRM gem shmem helpers initialize
the object we've allocated afterwards. So, let's split out
drm_gem_shmem_init() from drm_gem_shmem_create() to allow for doing this.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250911230147.650077-2-lyude@redhat.com
While discussing cgroups we noticed a problem where you could export
a BO to a dma-buf without having it ever being backed or accounted for.
This meant in low memory situations or eventually with cgroups, a
lower privledged process might cause the compositor to try and allocate
a lot of memory on it's behalf and this could fail. At least make
sure the exporter has managed to allocate the RAM at least once
before exporting the object.
This only applies currently to TTM_PL_SYSTEM objects, because
GTT objects get populated on first validate, and VRAM doesn't
use TT.
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/r/20250904021643.2050497-1-airlied@gmail.com
Increase TTM_NUM_MEM_TYPES from 8 to 9 to accommodate the upcoming
AMDGPU_PL_MMIO_REMAP placement.
Cc: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move legacy BKL struct_mutex from drm_device to drm_i915_private, which
is the last remaining user.
Signed-off-by: Luiz Otavio Mello <luiz.mello@estudante.ufscar.br>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250908131518.36625-2-luiz.mello@estudante.ufscar.br
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Move the range_overflows() and range_end_overflows() along with the _t
variants over from drm/i915 and drm/buddy to overflow.h.
Cc: Kees Cook <kees@kernel.org>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: linux-hardening@vger.kernel.org
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250829174601.2163064-3-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Export get/unmap/free pages API. We also need to tweak the SVM init to
allow skipping much of the unneeded parts.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250828142430.615826-15-matthew.auld@intel.com
Pull the pages stuff from the svm range into its own substructure, with
the idea of having the main pages related routines, like get_pages(),
unmap_pages() and free_pages() all operating on some lower level
structures, which can then be re-used for stuff like userptr.
v2:
- Move seq into pages struct (Matt B)
v3:
- Small kernel-doc fixes
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250828142430.615826-13-matthew.auld@intel.com
Cross-subsystem Changes:
- Update a number of DT bindings for STM32MP25 Arm SoC
Core Changes:
gem:
- Simplify locking for GPUVM
panel-backlight-quirks:
- Add additional quirks for EDID, DMI, brightness
sched:
- Fix race condition in trace code
- Clean up
sysfb:
- Clean up
Driver Changes:
amdgpu:
- Give kernel jobs a unique id for better tracing
amdxdna:
- Improve error reporting
bridge:
- Improve ref counting on bridge management
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
gud:
- Replace simple-KMS pipe with regular atomic helpers
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
ivpu:
- Clean up
nouveau:
- Improve error reporting
panthor:
- Fail VM bind if BO has offset
- Clean up
rcar-du:
- Make number of lanes configurable
rockchip:
- Add support for RK3588 DPTX output
rocket:
- Use kfree() and sizeof() correctly
- Test DMA status
- Clean up
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
- Clean up
stm:
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
tidss:
- Convert to kernel's FIELD_ macros
v3d:
- Improve job management and locking
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmi5Vt0bFIAAAAAABAAO
bWFudTIsMi41KzEuMTEsMiwyAAoJEGgNwR1TC3ojdpgIAJE+8M0PiEcOX6b5gRqW
kK8ymkVHXXyNbMYst/KsAHLStgyXnI7l2Rhd1ZY3lPO5pm+a7ehwKe+GTpdWoPTF
Eq7uMIgdjNX2Zqwr9QfsRAYAwMvcn6tNVvCbAeUzo7PNHaZXj1Q8K1VHpJV3BbWd
1w+OR2b12IpDx7KA1dFYVkL2ZrAE9B7FOLdrHFAOW75N/bcLwrQ4WREfirOsXGN9
TbqCknB3PQKhjlFC86UU7DGImKdPTYvt72K3pPF0Y4eCYmQoKFYqQsFmsdqUEQsa
Z2jSbXAFKV3DcJwMzEmNFC//6QeqEJFJMvYYqaqzTW9kMnA4anO/8JML0uTWLxRd
0rw=
=NzwW
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2025-09-04' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.18:
Cross-subsystem Changes:
- Update a number of DT bindings for STM32MP25 Arm SoC
Core Changes:
gem:
- Simplify locking for GPUVM
panel-backlight-quirks:
- Add additional quirks for EDID, DMI, brightness
sched:
- Fix race condition in trace code
- Clean up
sysfb:
- Clean up
Driver Changes:
amdgpu:
- Give kernel jobs a unique id for better tracing
amdxdna:
- Improve error reporting
bridge:
- Improve ref counting on bridge management
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
gud:
- Replace simple-KMS pipe with regular atomic helpers
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
ivpu:
- Clean up
nouveau:
- Improve error reporting
panthor:
- Fail VM bind if BO has offset
- Clean up
rcar-du:
- Make number of lanes configurable
rockchip:
- Add support for RK3588 DPTX output
rocket:
- Use kfree() and sizeof() correctly
- Test DMA status
- Clean up
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
- Clean up
stm:
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
tidss:
- Convert to kernel's FIELD_ macros
v3d:
- Improve job management and locking
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250904090932.GA193997@linux.fritz.box
Certain OLED devices malfunction on specific brightness levels.
Specifically, when DP_SOURCE_BACKLIGHT_LEVEL is written to with
the first byte being 0x00 and sometimes 0x01, the panel forcibly
turns off until the device sleeps again.
Below are some examples. This was found by iterating over brighness
ranges while printing DP_SOURCE_BACKLIGHT_LEVEL. It was found that
the screen would malfunction on specific values, and some of them
were collected.
Therefore, introduce a quirk where the minor byte of brightness is
OR'd with 0x03 to avoid the range of invalid values.
This quirk was tested by removing the workarounds and iterating
from 0 to 50_000 value ranges with a cadence of 0.2s/it. The
range of the panel is 1000...400_000, so the values were slightly
interpolated during testing. The custom brightness curve added on
6.15 was disabled.
86016: 10101000000000000
86272: 10101000100000000
87808: 10101011100000000
251648: 111101011100000000
251649: 111101011100000001
86144: 10101000010000000
87809: 10101011100000001
251650: 111101011100000010
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3803
Tested-by: Philip Müller <philm@manjaro.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250829145541.512671-5-lkml@antheas.dev
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Currently, the brightness quirk is limited to minimum brightness only.
Refactor it to a structure, so that more quirks can be added in the
future. Reserve 0 value for "no quirk", and use u16 to allow minimum
brightness up to 255.
Tested-by: Philip Müller <philm@manjaro.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250829145541.512671-3-lkml@antheas.dev
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Some code needing to know whether a bridge is the last in a chain currently
call drm_bridge_get_next_bridge(). However drm_bridge_get_next_bridge()
will soon increment the refcount of the returned bridge, which would make
such code more annoying to write.
In preparation for drm_bridge_get_next_bridge() to increment the refcount,
as well as to simplify such code, introduce a simple bool function to tell
whether a bridge is the last in the chain.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250801-drm-bridge-alloc-getput-drm_bridge_get_next_bridge-v2-5-888912b0be13@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
- Add madvise interface (Himal Prasad Ghimiray)
- Add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count and
memory attributes (Himal Prasad Ghimiray)
- Handle Firmware reported Hardware Errors notifying userspace with
device wedged uevent (Riana Tauro)
Cross-subsystem Changes:
- Add a vendor-specific recovery method to drm device wedged uevent
(Riana Tauro)
Driver Changes:
- Use same directory structure in debugfs as in sysfs (Michal Wajdeczko)
- Cleanup and future-proof VRAM region initialization (Piotr Piórkowski)
- Add G-states and PCIe link states to debugfs (Soham Purkait)
- Cleanup eustall debug messages (Harish Chegondi)
- Add SR-IOV support to restore Compression Control Surface (CCS) to
Xe2 and later (Satyanarayana K V P)
- Enable SR-IOV PF mode by default on supported platforms without
needing CONFIG_DRM_XE_DEBUG and mark some platforms behind
force_probe as supported (Michal Wajdeczko)
- More targeted log messages (Michal Wajdeczko)
- Cleanup STEER_SEMAPHORE/MCFG_MCR_SELECTOR usage (Nitin Gote)
- Use common code to emit flush (Tvrtko Ursulin)
- Add/extend more HW workarounds and tunings for Xe2 and Xe3
(Sk Anirban, Tangudu Tilak Tirumalesh, Nitin Gote, Chaitanya Kumar Borah)
- Add a generic dependency scheduler to help with TLB invalidations
and future scenarios (Matthew Brost)
- Use DRM scheduler for delayed GT TLB invalidations (Matthew Brost)
- Error out on incorrect device use in configfs
(Michal Wajdeczko, Lucas De Marchi)
- Refactor configfs attributes (Michal Wajdeczko / Lucas De Marchi)
- Allow configuring future VF devices via configfs (Michal Wajdeczko)
- Implement some missing XeLP workarounds (Tvrtko Ursulin)
- Generalize WA BB setup/emission and add support for
mid context restore BB, aka indirect context (Tvrtko Ursulin)
- Prepare the driver to expose mmio regions to userspace
in future (Ilia Levi)
- Add more GuC load error status codes (John Harrison)
- Document DRM_XE_GEM_CREATE_FLAG_DEFER_BACKING (Priyanka Dandamudi)
- Disable CSC and RPM on VFs (Lukasz Laguna, Satyanarayana K V P)
- Fix oops in xe_gem_fault with PREEMPT_RT (Maarten Lankhorst)
- Skip LMTT update if no LMEM was provisioned (Michal Wajdeczko)
- Add support to VF migration (Tomasz Lis)
- Use a helper for guc_waklv_enable functions (Jonathan Cavitt)
- Prepare GPU SVM for migration of THP (Francois Dugast)
- Program LMTT directory pointer on all GTs within a tile
(Piotr Piórkowski)
- Rename XE_WA to XE_GT_WA to better convey its scope vs the device WAs
(Matt Atwood)
- Allow to match devices on PCI devid/vendorid only (Lucas De Marchi)
- Improve PDE PAT index selection (Matthew Brost)
- Consolidate ASID allocation in xe_vm_create() vs
xe_vm_create_ioctl() (Piotr Piórkowski)
- Resize VF BARS to max possible size according to number of VFs
(Michał Winiarski)
- Untangle vm_bind_ioctl cleanup order (Christoph Manszewski)
- Start fixing usage of XE_PAGE_SIZE vs PAGE_SIZE to improve
compatibility with non-x86 arch (Simon Richter)
- Improve tile vs gt initialization order and accounting
(Gustavo Sousa)
- Extend WA kunit test to PTL
- Ensure data is initialized before transferring to pcode
(Stuart Summers)
- Add PSMI support for HW validation (Lucas De Marchi,
Vinay Belgaumkar, Badal Nilawar)
- Improve xe_dma_buf test (Thomas Hellström, Marcin Bernatowicz)
- Fix basename() usage in generator with !glibc (Carlos Llamas)
- Ensure GT is in C0 during resumes (Xin Wang)
- Add TLB invalidation abstraction (Matt Brost, Stuart Summers)
- Make MI_TLB_INVALIDATE conditional on migrate (Matthew Auld)
- Prepare xe_nvm to be initialized early for future use cases
(Riana Tauro)
-----BEGIN PGP SIGNATURE-----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=gqoN
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2025-08-29' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Add madvise interface (Himal Prasad Ghimiray)
- Add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count and
memory attributes (Himal Prasad Ghimiray)
- Handle Firmware reported Hardware Errors notifying userspace with
device wedged uevent (Riana Tauro)
Cross-subsystem Changes:
- Add a vendor-specific recovery method to drm device wedged uevent
(Riana Tauro)
Driver Changes:
- Use same directory structure in debugfs as in sysfs (Michal Wajdeczko)
- Cleanup and future-proof VRAM region initialization (Piotr Piórkowski)
- Add G-states and PCIe link states to debugfs (Soham Purkait)
- Cleanup eustall debug messages (Harish Chegondi)
- Add SR-IOV support to restore Compression Control Surface (CCS) to
Xe2 and later (Satyanarayana K V P)
- Enable SR-IOV PF mode by default on supported platforms without
needing CONFIG_DRM_XE_DEBUG and mark some platforms behind
force_probe as supported (Michal Wajdeczko)
- More targeted log messages (Michal Wajdeczko)
- Cleanup STEER_SEMAPHORE/MCFG_MCR_SELECTOR usage (Nitin Gote)
- Use common code to emit flush (Tvrtko Ursulin)
- Add/extend more HW workarounds and tunings for Xe2 and Xe3
(Sk Anirban, Tangudu Tilak Tirumalesh, Nitin Gote, Chaitanya Kumar Borah)
- Add a generic dependency scheduler to help with TLB invalidations
and future scenarios (Matthew Brost)
- Use DRM scheduler for delayed GT TLB invalidations (Matthew Brost)
- Error out on incorrect device use in configfs
(Michal Wajdeczko, Lucas De Marchi)
- Refactor configfs attributes (Michal Wajdeczko / Lucas De Marchi)
- Allow configuring future VF devices via configfs (Michal Wajdeczko)
- Implement some missing XeLP workarounds (Tvrtko Ursulin)
- Generalize WA BB setup/emission and add support for
mid context restore BB, aka indirect context (Tvrtko Ursulin)
- Prepare the driver to expose mmio regions to userspace
in future (Ilia Levi)
- Add more GuC load error status codes (John Harrison)
- Document DRM_XE_GEM_CREATE_FLAG_DEFER_BACKING (Priyanka Dandamudi)
- Disable CSC and RPM on VFs (Lukasz Laguna, Satyanarayana K V P)
- Fix oops in xe_gem_fault with PREEMPT_RT (Maarten Lankhorst)
- Skip LMTT update if no LMEM was provisioned (Michal Wajdeczko)
- Add support to VF migration (Tomasz Lis)
- Use a helper for guc_waklv_enable functions (Jonathan Cavitt)
- Prepare GPU SVM for migration of THP (Francois Dugast)
- Program LMTT directory pointer on all GTs within a tile
(Piotr Piórkowski)
- Rename XE_WA to XE_GT_WA to better convey its scope vs the device WAs
(Matt Atwood)
- Allow to match devices on PCI devid/vendorid only (Lucas De Marchi)
- Improve PDE PAT index selection (Matthew Brost)
- Consolidate ASID allocation in xe_vm_create() vs
xe_vm_create_ioctl() (Piotr Piórkowski)
- Resize VF BARS to max possible size according to number of VFs
(Michał Winiarski)
- Untangle vm_bind_ioctl cleanup order (Christoph Manszewski)
- Start fixing usage of XE_PAGE_SIZE vs PAGE_SIZE to improve
compatibility with non-x86 arch (Simon Richter)
- Improve tile vs gt initialization order and accounting
(Gustavo Sousa)
- Extend WA kunit test to PTL
- Ensure data is initialized before transferring to pcode
(Stuart Summers)
- Add PSMI support for HW validation (Lucas De Marchi,
Vinay Belgaumkar, Badal Nilawar)
- Improve xe_dma_buf test (Thomas Hellström, Marcin Bernatowicz)
- Fix basename() usage in generator with !glibc (Carlos Llamas)
- Ensure GT is in C0 during resumes (Xin Wang)
- Add TLB invalidation abstraction (Matt Brost, Stuart Summers)
- Make MI_TLB_INVALIDATE conditional on migrate (Matthew Auld)
- Prepare xe_nvm to be initialized early for future use cases
(Riana Tauro)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/nuejxdhnalyok7tzwkrj67dwjgdafwp4mhdejpyyqnrh4f2epq@nlldovuflnbx
Convert XRGB8888 to 2bit grayscale.
It uses drm_fb_xrgb8888_to_gray8() to convert the pixels to gray8 as an
intermediate step before converting to gray2.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250721-st7571-format-v2-5-159f4134098c@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
The DW DP TX Controller is compliant with the DisplayPort Specification
Version 1.4 with the following features:
* DisplayPort 1.4a
* Main Link: 1/2/4 lanes
* Main Link Support 1.62Gbps, 2.7Gbps, 5.4Gbps and 8.1Gbps
* AUX channel 1Mbps
* Single Stream Transport(SST)
* Multistream Transport (MST)
* Type-C support (alternate mode)
* HDCP 2.2, HDCP 1.3
* Supports up to 8/10 bits per color component
* Supports RBG, YCbCr4:4:4, YCbCr4:2:2, YCbCr4:2:0
* Pixel clock up to 594MHz
* I2S, SPDIF audio interface
Add library with common helpers to make it can be shared with
other SoC.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250822063959.692098-3-andyshrk@163.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Since all users of gem.gpuva.lock_dep_map now rely on the mutex directly
in gpuva, we may remove it. Whether the mutex is used is now tracked by
a flag in gpuvm rather than by whether lock_dep_map is null.
Note that a GEM object may not be pushed to multiple gpuvms that
disagree on the value of this new flag. But that's okay because a single
driver should use the same locking scheme everywhere, and a GEM object
is driver specific (when a GEM is exported with prime, a new GEM object
instance is created from the backing dma-buf).
The flag is present even with CONFIG_LOCKDEP=n because the intent is
that the flag will also cause vm_bo cleanup to become deferred. However,
that will happen in a follow-up patch.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250827-gpuva-mutex-in-gem-v3-3-bd89f5a82c0d@google.com
[ Use lockdep_is_held() instead of lock_is_held(). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
There are two main ways that GPUVM might be used:
* staged mode, where VM_BIND ioctls update the GPUVM immediately so that
the GPUVM reflects the state of the VM *including* staged changes that
are not yet applied to the GPU's virtual address space.
* immediate mode, where the GPUVM state is updated during run_job(),
i.e., in the DMA fence signalling critical path, to ensure that the
GPUVM and the GPU's virtual address space has the same state at all
times.
Currently, only Panthor uses GPUVM in immediate mode, but the Rust
drivers Tyr and Nova will also use GPUVM in immediate mode, so it is
worth to support both staged and immediate mode well in GPUVM. To use
immediate mode, the GEMs gpuva list must be modified during the fence
signalling path, which means that it must be protected by a lock that is
fence signalling safe.
For this reason, a mutex is added to struct drm_gem_object that is
intended to achieve this purpose. Adding it directly in the GEM object
both makes it easier to use GPUVM in immediate mode, but also makes it
possible to take the gpuva lock from core drm code.
As a follow-up, another change that should probably be made to support
immediate mode is a mechanism to postpone cleanup of vm_bo objects, as
dropping a vm_bo object in the fence signalling path is problematic for
two reasons:
* When using DRM_GPUVM_RESV_PROTECTED, you cannot remove the vm_bo from
the extobj/evicted lists during the fence signalling path.
* Dropping a vm_bo could lead to the GEM object getting destroyed.
The requirement that GEM object cleanup is fence signalling safe is
dubious and likely to be violated in practice.
Panthor already has its own custom implementation of postponing vm_bo
cleanup.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250827-gpuva-mutex-in-gem-v3-1-bd89f5a82c0d@google.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Address the need for a recovery method (firmware flash on Firmware errors)
introduced in the later patches of Xe KMD.
Whenever XE KMD detects a firmware error, a firmware flash is required to
recover the device to normal operation.
The initial proposal to use 'firmware-flash' as a recovery method was
not applicable to other drivers and could cause multiple recovery
methods specific to vendors to be added.
To address this a more generic 'vendor-specific' method is introduced,
guiding users to refer to vendor specific documentation and system logs
for detailed vendor specific recovery procedure.
Add a recovery method 'WEDGED=vendor-specific' for such errors.
Vendors must provide additional recovery documentation if this method
is used.
It is the responsibility of the consumer to refer to the correct vendor
specific documentation and usecase before attempting a recovery.
For example: If driver is XE KMD, the consumer must refer
to the documentation of 'Device Wedging' under 'Documentation/gpu/xe/'.
v2: fix documentation (Raag)
v3: add more details to commit message (Sima, Rodrigo, Raag)
add an example script to the documentation (Raag)
v4: use consistent naming (Raag)
v5: fix commit message
v6: add more documentation
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250826063419.3022216-3-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add helper drm_crtc_fill_palette_332(), which fills palettes with
RGB332 color data. Each color in RGB332 format serves as an index
into an 8-bit palette that stores the corresponding component-based
colors.
Vesadrm will use the new helper to emulate RGB formats on top of
framebuffers in C8 format.
v2:
- add comments on bit operations (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250714151513.309475-6-tzimmermann@suse.de
Sync with drm-misc-next which is necessary for changes in gpuvm
and gpusvm that will be used in xe.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Some touch controllers have to be powered on after the panel's backlight
is enabled. To support these controllers, introduce .panel_enabled() and
.panel_disabling() to panel_follower_funcs and use them to power on the
device after the panel and its backlight are enabled.
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250818115015.2909525-1-treapking@chromium.org
Some bridges can update HDCP status based on userspace requests if they
support HDCP.
The HDCP property is created after connector initialization and before
registration, just like other connector properties.
Add the content protection property to the connector if a bridge
supports HDCP.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250812082135.3351172-2-fshao@chromium.org
The drm_gpusvm_for_each_notifier, drm_gpusvm_for_each_notifier_safe and
drm_gpusvm_for_each_range_safe macros are useful for locating notifiers
and ranges within a user-specified range. By making these macros public,
we enable broader access and utility for developers who need to leverage
them in their implementations.
v2 (Matthew Brost)
- drop inline __drm_gpusvm_range_find
- /s/notifier_iter_first/drm_gpusvm_notifier_find
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250819162058.2777306-5-himal.prasad.ghimiray@intel.com
This ops is used to iterate over GPUVA's in the user-provided range
and split the existing sparse VMA's if the start or end of the input
range lies within it. The operations can create up to 2 REMAPS and 2 MAPs.
The primary use case is for drivers to assign attributes to GPU VAs in
the specified range without performing unmaps or merging mappings,
supporting fine-grained control over sparse va's.
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Himal Prasad Ghimiray<himal.prasad.ghimiray@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250819162058.2777306-4-himal.prasad.ghimiray@intel.com
drm_gpuva_init() only has one internal user, and given we are about to
add new optional fields, it only add maintenance burden for no real
benefit, so let's kill the thing now.
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Rob Clark <robin.clark@oss.qualcomm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Rob Clark <robin.clark@oss.qualcomm.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250819162058.2777306-3-himal.prasad.ghimiray@intel.com
We are about to pass more arguments to drm_gpuvm_sm_map[_ops_create](),
so, before we do that, let's pass arguments through a struct instead
of changing each call site every time a new optional argument is added.
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Brendan King <Brendan.King@imgtec.com>
Cc: Matt Coster <matt.coster@imgtec.com>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Caterina Shablia <caterina.shablia@collabora.com>
Cc: Rob Clark <robin.clark@oss.qualcomm.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Co-developed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com> # imagination/pvr_vm.c
Acked-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250819162058.2777306-2-himal.prasad.ghimiray@intel.com
Create mipi_dsi_dcs_read_multi(), which accepts a mipi_dsi_multi_context
struct for improved error handling and cleaner panel driver code.
Create mipi_dsi_dcs_write_var_seq_multi() and
mipi_dsi_generic_write_var_seq_multi() macros which allow MIPI panel
drivers to write non-constant data to display controllers.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Brigham Campbell <me@brighamcampbell.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250731032343.1258366-3-me@brighamcampbell.com
Bring v6.17-rc1 to propagate commits from other subsystems, particularly
PCI, which has some new functions needed for SR-IOV integration.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
All our PCI ID macros match on the PCI class besides the vendor and
devid, even for devices that may or may not have display. This may not
work going forward, so add a simple INTEL_PCI_DEVICE that matches only
on vendor/device IDs.
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250808-intel-pci-device-v1-1-ce3545d86502@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
If the page is part of a folio, DMA map the whole folio at once instead of
mapping individual pages one after the other. For example if 2MB folios
are used instead of 4KB pages, this reduces the number of DMA mappings by
512.
The folio order (and consequently, the size) is persisted in the struct
drm_pagemap_device_addr to be available at the time of unmapping.
v2:
- Initialize order variable (Matthew Brost)
- Set proto and dir for completeness (Matthew Brost)
- Do not populate drm_pagemap_addr, document it (Matthew Brost)
- Add and use macro NR_PAGES(order) (Matthew Brost)
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/20250805140028.599361-4-francois.dugast@intel.com
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
This struct embeds more information than just the DMA address. This will
help later to support folio orders greater than zero. At this point, there
is no functional change as the only struct member used is addr.
In Xe, adapt to the new drm_gpusvm_devmem_ops type signatures using struct
drm_pagemap_addr, as well as the internal xe SVM functions implementing
those operations. The use of this struct is propagated to xe_migrate as it
makes indexed accesses to the next DMA address but they are no longer
contiguous.
v2:
- Rename drm_pagemap_device_addr to drm_pagemap_addr (Matthew Brost)
- Squash with patch for Xe (Matthew Brost)
- Set proto and dir for completeness (Matthew Brost)
- Assess DMA map protocol (Matthew Brost)
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/20250805140028.599361-3-francois.dugast@intel.com
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Rename this struct to the more generic name drm_pagemap_addr so it can be
used in a broader context, such as DMA mappings of CPU memory.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/20250805140028.599361-2-francois.dugast@intel.com
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
non-drm:
rust:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
mtd:
- driver for Intel GPU non-volatile storage
i2c
- designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support
-----BEGIN PGP SIGNATURE-----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=n9MO
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Highlights:
- Intel xe enable Panthor Lake, started adding WildCat Lake
- amdgpu has a bunch of reset improvments along with the usual IP
updates
- msm got VM_BIND support which is important for vulkan sparse memory
- more drm_panic users
- gpusvm common code to handle a bunch of core SVM work outside
drivers.
Detail summary:
Changes outside drm subdirectory:
- 'shrink_shmem_memory()' for better shmem/hibernate interaction
- Rust support infrastructure:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
- mtd driver for Intel GPU non-volatile storage
- i2c designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support"
* tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits)
drm/tidss: oldi: convert to devm_drm_bridge_alloc() API
drm/tidss: encoder: convert to devm_drm_bridge_alloc()
drm/amdgpu: move reset support type checks into the caller
drm/amdgpu/sdma7: re-emit unprocessed state on ring reset
drm/amdgpu/sdma6: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5: re-emit unprocessed state on ring reset
drm/amdgpu/gfx12: re-emit unprocessed state on ring reset
drm/amdgpu/gfx11: re-emit unprocessed state on ring reset
drm/amdgpu/gfx10: re-emit unprocessed state on ring reset
drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset
drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset
drm/amdgpu: Add WARN_ON to the resource clear function
drm/amd/pm: Use cached metrics data on SMUv13.0.6
drm/amd/pm: Use cached data for min/max clocks
gpu: nova-core: fix bounds check in PmuLookupTableEntry::new
drm/amdgpu: Replace HQD terminology with slots naming
drm/amdgpu: Add user queue instance count in HW IP info
drm/amd/amdgpu: Add helper functions for isp buffers
drm/amd/amdgpu: Initialize swnode for ISP MFD device
...
Remove the deprecated mipi_dsi_generic_write_seq() and
mipi_dsi_generic_write_chatty() functions now that they are no longer
used.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Brigham Campbell <me@brighamcampbell.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250722015313.561966-4-me@brighamcampbell.com
Create mipi_dsi_dual, mipi_dsi_dual_dcs_write_seq_multi, and
mipi_dsi_dual_generic_write_seq_multi macros for panels which are driven
by two parallel serial interfaces. This allows for the reduction of code
duplication in drivers for these panels.
Remove mipi_dsi_dual_dcs_write_seq_multi definition from
panel-novatek-nt36523.c to avoid the duplicate definition. Make novatek
driver pass mipi_dsi_context struct as a pointer.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Brigham Campbell <me@brighamcampbell.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250722015313.561966-2-me@brighamcampbell.com
Many functions get a drm_bridge pointer, only use it in the function body
(or a smaller scope such as a loop body), and don't store it. In these
cases they always need to drm_bridge_put() it before returning (or exiting
the scope).
Some of those functions have complex code paths with multiple return points
or loop break/continue. This makes adding drm_bridge_put() in the right
places tricky, ugly and error prone in case of future code changes.
Others use the bridge pointer in the return statement and would need to
split the return line to fit the drm_bridge_put, which is a bit annoying:
-return some_thing(bridge);
+ret = some_thing(bridge);
+drm_bridge_put(bridge);
+return ret;
To make it easier for all of them to put the bridge reference correctly
without complicating code, define a scope-based cleanup action to be used
with __free().
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250708-drm-bridge-alloc-getput-drm_bridge_chain_get_first_bridge-v9-1-db1ba3df7f58@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Accessing amdgpu internal data structures "struct amdgpu_device"
and "struct amdgpu_bo" in ISP V4L2 driver to alloc/free GART
buffers is not recommended.
Add new amdgpu_isp helper functions that takes opaque params
from ISP V4L2 driver and calls the amdgpu internal functions
amdgpu_bo_create_isp_user() and amdgpu_bo_create_kernel() to
alloc/free GART buffers.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pass along the format info from .fb_create() to aliminate the
redundant drm_get_format_info() calls from the afbc code.
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-9-ville.syrjala@linux.intel.com
Pass along the format info from .fb_create() to eliminate the
redundant drm_get_format_info() calls from the gem fb code.
v2: Fix kernel docs (Laurent)
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Andy Yan <andy.yan@rock-chips.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: virtualization@lists.linux.dev
Cc: spice-devel@lists.freedesktop.org
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-8-ville.syrjala@linux.intel.com
Decouple .get_format_info() from struct drm_mode_fb_cmd2 and just
pass the pixel format+modifier combo in by hand.
We may want to use .get_format_info() outside of the normal
addfb paths where we won't have a struct drm_mode_fb_cmd2, and
creating a temporary one just for this seems silly.
v2: Fix intel_fb_get_format_info() docs (Laurent)
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <siqueira@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-2-ville.syrjala@linux.intel.com
