fpfn and lpfn in struct ttm_place are 32-bit page numbers. With 4KB page
size this can support up to 44-bit physical addressing. Grow these to
64-bit (uint64_t) to support larger physical addresses.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patch.msgid.link/20260513141253.20410-1-felix.kuehling@amd.com
Introduce the main part of the new fb_pin parent interface:
- intel_parent_fb_pin_ggtt_(un)pin()
- intel_parent_fb_pin_dpt_(un)pin()
- intel_parent_fb_pin_reuse_vma()
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260508143426.26504-14-ville.syrjala@linux.intel.com
strut intel_fb_pin_params will be an important part of the fb_pin
interface, so move the definition to the parent interface file.
Or maybe we should have a separate header for this kind of stuff
since the users of the parent interface will need the struct
definition but not the parent interface vfunc struct definitions?
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260508143426.26504-3-ville.syrjala@linux.intel.com
Introduce the "fb_pin" parent interface, as the first trivial step
move the *_get_map() stuff there.
The whole "fb_pin" as an interface might not really make sense,
and perhaps this (and other stuff) should just be collected into
some kind of "bo" interface. But let's go with "fb_pin" for now
to match where things are implemented, and possibly restructure
it later.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260508143426.26504-2-ville.syrjala@linux.intel.com
Add new field in struct drm_dp_as_sdp to store coasting vtotal.
This is used by the sinks that support Panel Replay and Asynchronous
timing during PR Active to derive refresh rate, when AS SDP transmission
is stopped by the source.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260428074457.3566918-7-ankit.k.nautiyal@intel.com
Add additional DPCDs required to be configured to support VRR with Panel
Replay. These DPCDs are specifically required for configuring Adaptive Sync
SDP and are introduced in DP v2.1.
v2:
- Correct the shift for the bits. (Ville)
- Add DP_PR_ prefix for the PR-related fields.
v3:
- Use macro values in their shifted form to match the convention. (Ville)
v4:
- Add macro for the mask. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260428074457.3566918-5-ankit.k.nautiyal@intel.com
DP v2.1 introduced support for sending AS SDP payload bytes for FAVT.
Add the relavant bits for the same.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260428074457.3566918-4-ankit.k.nautiyal@intel.com
Align the DP_DPRX feature enumeration macros for better readability and
consistency, and use the BIT() macro instead of open-coded shifts.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260428074457.3566918-3-ankit.k.nautiyal@intel.com
The AS SDP payload field masks were misnamed and placed under the DPRX
feature enumeration list. These are not DPRX capability bits, but are
payload field masks for the Adaptive Sync SDP.
Relocate both masks next to the AS SDP definitions.
Update users to the corrected names. No functional change.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260428074457.3566918-2-ankit.k.nautiyal@intel.com
Now that all panel drivers use devm_drm_panel_alloc(),
there are no external callers of drm_panel_init().
Make it static to prevent new users from bypassing the
refcounted allocation path.
Remove stale references to drm_panel_init() in kdocs.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260508-drm_panel_init_rm-v2-10-0bd4ac429971@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
When ttm_tt_swapout() fails, the current code calls
ttm_resource_add_bulk_move() followed by ttm_resource_move_to_lru_tail()
to restore the resource's bulk_move membership.
However, ttm_resource_move_to_lru_tail() places the resource at the tail
of the LRU list which, relative to the walk cursor's hitch node (placed
immediately after the resource when it was yielded), puts the resource
*in front of the* the hitch. The next list_for_each_entry_continue() from
the hitch finds the same resource again, causing an infinite loop.
Fix by deferring del_bulk_move to the success path only.
On the success path, TTM_TT_FLAG_SWAPPED has just been set by
ttm_tt_swapout() but the resource is still tracked in the bulk_move range,
so ttm_resource_del_bulk_move()'s !ttm_resource_unevictable() guard would
incorrectly skip the removal. Introduce
ttm_resource_del_bulk_move_unevictable() which bypasses that guard.
Reported-by: Jatin Kataria <jkataria@netflix.com>
Fixes: fc5d96670e ("drm/ttm: Move swapped objects off the manager's LRU list")
Cc: Christian König <christian.koenig@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Cc: <stable@vger.kernel.org> # v6.13+
Assisted-by: GitHub_Copilot:claude-sonnet-4.6
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Boqun Feng <boqun@kernel.org>
Link: https://patch.msgid.link/20260428094442.16985-1-thomas.hellstrom@linux.intel.com
UAPI Changes:
- Support medium/low power modes in amdxdna.
- Support limiting frequency in ivpu.
- Document license for drm core uAPI headers.
- Add the following DRM formats: P230, Y7, XYYY2101010, T430,
XVUY210101010.
Cross-subsystem Changes:
- Add and improve dt-bindings.
- Remove unused dma-fence-array's signal_on_any support.
Core Changes:
- Do not call drop_master on file close if not master.
- Convert drm-bridge and drm/atomic to use drm_printf_indent.
- Remove the extra call to drm_connector_attach_encoder after
drm_bridge_connector_init().
- Assorted docbook updates.
Driver Changes:
- Bugfixes in amdxdna, ivpu, mipi-dsi, imagination, nouveau, panthor,
bridge/analogix_dp, ipv3, lontium-lt8912b, verisilicon, tve200,
etnaviv, panel/focaltech-ota7290b, panel/jadard-jd9365da-h3,
bridge/ite-it6263, renesas, xlnx, bridge/cdns-dsi, gma500,
bridge/microchip-lvds, mgag200.
- Add support for MStar TSUMU88ADT3-LF-1 bridge.
- Add support for WaveShare 7, Novatek NT35532, Startek KD070HDFLD092,
ChipWealth CH13726A AMOLED, Team Source Display TST070WSNE-196C,
Displaytech DT050BTFT-PTS panels.
- Improve mipi-dsi shutdown and convert a panasonic panel to use the
mipi-dsi wrappers.
- Allowing dumping vbios over debugfs in GSP-RM mode.
- Update maintainers for ivpu, add reviewer for drm-bridge code
and update maintainers for LT8912B DRM HDMI bridge.
- Add test pattern support to bridge/ti-sn65dsi83.
- Convert vmwgfx to vblank timers.
- Add power management to sysfb drm drivers to allow suspend/resume.
- Support the aforementioned new drm formats in xlnx/qynqmp.
- Fix panel Kconfig dependencies.
- Add carveout support for debugging and bringup to amxdna.
- Add support for long command tx via videobuffer in bridge/tc358768.
-----BEGIN PGP SIGNATURE-----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=kWIv
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2026-05-07' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.2-rc1:
UAPI Changes:
- Support medium/low power modes in amdxdna.
- Support limiting frequency in ivpu.
- Document license for drm core uAPI headers.
- Add the following DRM formats: P230, Y7, XYYY2101010, T430,
XVUY210101010.
Cross-subsystem Changes:
- Add and improve dt-bindings.
- Remove unused dma-fence-array's signal_on_any support.
Core Changes:
- Do not call drop_master on file close if not master.
- Convert drm-bridge and drm/atomic to use drm_printf_indent.
- Remove the extra call to drm_connector_attach_encoder after
drm_bridge_connector_init().
- Assorted docbook updates.
Driver Changes:
- Bugfixes in amdxdna, ivpu, mipi-dsi, imagination, nouveau, panthor,
bridge/analogix_dp, ipv3, lontium-lt8912b, verisilicon, tve200,
etnaviv, panel/focaltech-ota7290b, panel/jadard-jd9365da-h3,
bridge/ite-it6263, renesas, xlnx, bridge/cdns-dsi, gma500,
bridge/microchip-lvds, mgag200.
- Add support for MStar TSUMU88ADT3-LF-1 bridge.
- Add support for WaveShare 7, Novatek NT35532, Startek KD070HDFLD092,
ChipWealth CH13726A AMOLED, Team Source Display TST070WSNE-196C,
Displaytech DT050BTFT-PTS panels.
- Improve mipi-dsi shutdown and convert a panasonic panel to use the
mipi-dsi wrappers.
- Allowing dumping vbios over debugfs in GSP-RM mode.
- Update maintainers for ivpu, add reviewer for drm-bridge code
and update maintainers for LT8912B DRM HDMI bridge.
- Add test pattern support to bridge/ti-sn65dsi83.
- Convert vmwgfx to vblank timers.
- Add power management to sysfb drm drivers to allow suspend/resume.
- Support the aforementioned new drm formats in xlnx/qynqmp.
- Fix panel Kconfig dependencies.
- Add carveout support for debugging and bringup to amxdna.
- Add support for long command tx via videobuffer in bridge/tc358768.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/f73f342d-6efb-416d-81b0-1716bdd98d5f@linux.intel.com
The kernel-doc block above struct drm_gpusvm_pages duplicates the
descriptions of the bit-flags that live in struct drm_gpusvm_pages_flags
using dotted notation (@flags.migrate_devmem, @flags.unmapped, ...).
That dotted notation is intended for nested anonymous structs/unions that
the parser flattens into the parent's parameter list. Here, however,
flags is of a named external type, so the parser does not flatten its
members and the dotted entries do not match any member of
drm_gpusvm_pages. They also duplicate the canonical descriptions already
present in the kernel-doc of struct drm_gpusvm_pages_flags itself.
Drop the five @flags.* lines and replace them with a single @flags entry
that cross-references the type via kernel-doc's "&struct ..." syntax.
This eliminates the redundancy and removes warnings emitted by the new
parameterdescs check in scripts/kernel-doc:
Excess struct member 'flags.migrate_devmem' description in
'drm_gpusvm_pages'
Excess struct member 'flags.unmapped' description in 'drm_gpusvm_pages'
Excess struct member 'flags.partial_unmap' description in
'drm_gpusvm_pages'
Excess struct member 'flags.has_devmem_pages' description in
'drm_gpusvm_pages'
Excess struct member 'flags.has_dma_mapping' description in
'drm_gpusvm_pages'
No functional change.
Assisted-by: Claude:claude-opus-4.6
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260501175956.4054088-1-shuicheng.lin@intel.com
This reverts commit e3953ff665.
Seems to have been accidentally pushed without mandatory review.
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de> #irc
Acked-by: Maxime Ripard <mripard@kernel.org> #irc
UAPI Changes:
- Expose per-client BO memory usage via fdinfo in amdxdna. (Hou)
- Change the default priority of drm scheduler to fair. (Tvrtko)
Cross-subsystem Changes:
- Revert hugetlb support in udmabuf. (Gunthorpe)
- Fix error in udmabuf with CONFIG_DMA_API_DEBUG(/ _SG). (Gavrilov)
- Add Docbook for DRM_IOCTL_SYNCOBJ_EVENTFD, (Ser)
clarify drm_bridge_get/put. (Tvrtko)
- Change signature of drm_connector_attach_hdr_output_metadata_property. (Canal)
- Use IOVA allocations in gpusvm and pagemap APIs. (Brost)
- Fix tracepoints vs dma-fence lifetime. (Tvrtko)
- Convert st-dma*.c tests to use kunit. (Gunthorpe)
Core Changes:
- Deduplicate counter and timestamp retrieval in vblank code. (Ville)
- Parse AMD VSDB v3 in CTA extension blocks, and use it in amdgpu. (Chen)
- Prevent bridge and encoder chain changes at inopportune times. (Ceresoli)
- Map the run queue 1:1 to the drm scheduler. (Tvrtko)
Driver Changes:
- Assorted bugfixes and (documentation) updates to rockchip, bridge/synopsis,
panfrost, tidss, accel/qaic, tilcdc, vc4, ast, imagination, panthor,
renesas, accel/amdxdna, msxfb, bridge/imx8mp, nouveau.
bridge/analogix_dp, bridge/exynos_dp, omap.
- Add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1, panels.
- Add support for a lot of waveshare panels (Baryshkov)
- Support for AIE4 devices in accel/wamdxdna. (Zhang)
- Enable support for GEM shrinking in panthor. (Goel/Brezillon)
- Runtime Power Management is added to v3d. (Canal)
- Allow panel probing and use the panel bridge helper in analogix_dp. (Ding)
- Support XRGB1555 and C8 in mgag and XRGB1555 in ast. (Zimmermann)
-----BEGIN PGP SIGNATURE-----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=T0tH
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2026-04-20' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.1-rc1:
UAPI Changes:
- Expose per-client BO memory usage via fdinfo in amdxdna. (Hou)
- Change the default priority of drm scheduler to fair. (Tvrtko)
Cross-subsystem Changes:
- Revert hugetlb support in udmabuf. (Gunthorpe)
- Fix error in udmabuf with CONFIG_DMA_API_DEBUG(/ _SG). (Gavrilov)
- Add Docbook for DRM_IOCTL_SYNCOBJ_EVENTFD, (Ser)
clarify drm_bridge_get/put. (Tvrtko)
- Change signature of drm_connector_attach_hdr_output_metadata_property. (Canal)
- Use IOVA allocations in gpusvm and pagemap APIs. (Brost)
- Fix tracepoints vs dma-fence lifetime. (Tvrtko)
- Convert st-dma*.c tests to use kunit. (Gunthorpe)
Core Changes:
- Deduplicate counter and timestamp retrieval in vblank code. (Ville)
- Parse AMD VSDB v3 in CTA extension blocks, and use it in amdgpu. (Chen)
- Prevent bridge and encoder chain changes at inopportune times. (Ceresoli)
- Map the run queue 1:1 to the drm scheduler. (Tvrtko)
Driver Changes:
- Assorted bugfixes and (documentation) updates to rockchip, bridge/synopsis,
panfrost, tidss, accel/qaic, tilcdc, vc4, ast, imagination, panthor,
renesas, accel/amdxdna, msxfb, bridge/imx8mp, nouveau.
bridge/analogix_dp, bridge/exynos_dp, omap.
- Add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1, panels.
- Add support for a lot of waveshare panels (Baryshkov)
- Support for AIE4 devices in accel/wamdxdna. (Zhang)
- Enable support for GEM shrinking in panthor. (Goel/Brezillon)
- Runtime Power Management is added to v3d. (Canal)
- Allow panel probing and use the panel bridge helper in analogix_dp. (Ding)
- Support XRGB1555 and C8 in mgag and XRGB1555 in ast. (Zimmermann)
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/bf31b1a1-951b-4f60-b226-22e8c083697d@linux.intel.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fix a typo in the documentation for struct drm_crtc_crc
("occured." -> "occurred").
Signed-off-by: Eduardo Vasconcelos <eduardo@eduardovasconcelos.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260424183630.3764-1-eduardo@eduardovasconcelos.com
- Debugfs multi-LRC engine info (Xin Wang, 2 commits)
Expose multi-LRC engine classes in the debugfs engine info output
and improve the output readability.
- drm/drm_ras: Add clear-error-counter netlink command to drm_ras
Cross-subsystem Changes:
Core Changes:
- drm/gpusvm: Reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges
- drm/i915/display: switch to including common step file directly
Driver Changes:
- Engine initialization cleanup (Matt Roper, 10 commits)
Clean up engine initialization code inherited from i915 by moving
hardware programming (CCS enablement, HWSTAM, GFX_MODE, BLIT_CCTL,
STOP_RING) into the RTP infrastructure. This makes the programming
visible and verifiable via debugfs, and applies consistently across
both normal and execlist init paths. Also fixes the name/definition
of GFX_MODE, marks BCS engines as belonging to the GT forcewake
domain, and drops the now-unused xe_hw_engine_mmio_write32() helper.
- PF fair scheduling auto-provisioning (Michal Wajdeczko, 13 commits)
Fix several corner cases in SR-IOV PF scheduling policy provisioning,
then auto-provision PF and all VFs with 16ms execution-quantum and
preemption-timeout defaults. This prevents a VF from monopolizing
the GPU by submitting workloads without gaps, without requiring the
user to configure sysfs manually.
- System Controller support for CRI/Xe3p (Anoop Vijay + Raag Jadav, 10 commits)
Add xe_sysctrl infrastructure for communicating with the System
Controller firmware entity on CRI/Xe3p discrete GPU platforms via a
mailbox interface. Includes type definitions, register definitions,
mailbox communication, initialization, power management, interrupt
handling, and event dispatch. Builds on this to add initial RAS
correctable error handling, using sysctrl interrupts to receive
threshold-crossed events.
- PXP state machine fixes (Daniele Ceraolo Spurio, 4 commits)
Fix PXP state machine handling: reject PXP sessions on PTL platforms
with older GSC firmware that does not support it, fix the restart
flag not being cleared after jumping back in pxp_start, remove
incorrect handling of an impossible state during suspend, and clean
up termination status on failure.
- Reset/wedge/unload corner case fixes (Zhanjun Dong + Matthew Brost, 5 commits)
Fix memory leaks and fence signal failures that occurred during GPU
reset, device wedging, and driver unload by forcefully tearing down
remaining exec queues in GuC submit fini, always killing queues in
pause/abort, and triggering queue cleanup when not in wedged mode 2.
Also ensures GuC CT state transitions via STOP before DISABLED.
- Wedge path memory allocation fixes (Matthew Brost, 3 commits)
Avoid GFP_KERNEL allocations in xe_device_declare_wedged(), which
runs in the DMA-fence signaling path. Also drops the
guc_submit_wedged_fini devm registration from xe_guc_submit_wedge()
to clean up the wedge shutdown sequence.
- PAT type cleanup and invalid index hardening (Xin Wang, 3 commits)
Standardize pat_index fields to u16 across the driver, default
XE_CACHE_NONE_COMPRESSION to XE_PAT_INVALID_IDX (matching
WB_COMPRESSION), and introduce xe_cache_pat_idx() — a macro helper
that validates cache_mode bounds and asserts on invalid PAT indices
before returning the index.
- Reject unsafe PAT indices for CPU cached memory (Jia Yao, 2 commits)
Reject incoherent (coh_none) PAT indices for CPU cached memory in
both the madvise ioctl and vm_bind with CPU_ADDR_MIRROR flag, closing
a security gap where the GPU could bypass CPU caches and observe
stale or sensitive data.
- OA improvements for CRI device memory (Ashutosh Dixit, 3 commits)
Move OA buffer access to the xe_map layer to support both system and
device memory (required for CRI), switch OA buffer mmap to use
drm_gem_mmap_obj, and implement workaround Wa_14026633728.
- xe_drm.h documentation fixes (Shuicheng Lin, 6 commits)
Fix multiple documentation issues in the xe_drm.h UAPI header:
typos, spelling errors, grammar, wrong names and references,
kernel-doc cross-reference syntax, and broken code examples.
- kernel-doc syntax fixes in xe headers (Shuicheng Lin, 4 commits)
Fix kernel-doc syntax issues across xe header files: missing '@'
prefixes on member tags, stale/mismatched member tags, comment
syntax errors, and type/parameter name mismatches in references.
- Buffer object and DMA-buf resource leak fixes (Shuicheng Lin, 4 commits)
Fix resource leaks on error paths: DMA-buf attachment leak in
xe_gem_prime_import(), BO leak in xe_dma_buf_init_obj() on
allocation failure, and BO leaks in xe_bo_init_locked() on GGTT
flag validation and unaligned size validation failures.
- Include guard cleanup (Shuicheng Lin, 5 commits)
Fix and standardize include guards across xe header files: normalize
double-underscore guards to single, add missing leading/trailing
underscores, add missing _H suffixes, and add guards to previously
unprotected headers.
- VF CCS memory pool (Satyanarayana K V P, 2 commits)
Switch VF CCS read/write operations from the DRM sub-allocator to
DRM mm, fixing allocation failures in fence-disabled mode where
the sub-allocator's hole cursor assumption breaks. Also introduces
a general BO-backed memory pool with shadow support using drm_mm.
- i915/xe step definition unification (Jani Nikula, 3 commits)
Complete the migration to the shared intel_step header: switch xe
from its own xe_step enum to the shared intel_step naming and
definitions, and update i915 display code to include the common
step header directly.
- Xe3p GT tuning fixes (3 commits)
Three Xe3p GT tuning corrections: fix the register offset for
GAMSTLB_CTRL, stop applying the CCCHKNREG1 tuning from Xe3p onward
(no longer needed), and mark ROW_CHICKEN5 as a masked register.
- Forcewake cleanup in GT and GuC PC (Raag Jadav, 3 commits)
Drop a redundant forcewake reference in xe_gt, reorder forcewake
usage in xe_guc_pc_fini_hw() to avoid a redundant hold, and convert
xe_guc_pc_stop() to void since it can no longer fail.
- SVM garbage collector fix on close (Matthew Brost, 2 commits)
Disable the SVM garbage collector work item when an SVM is closed
to prevent use-after-free when the GC fires after the SVM is freed.
- Admin-only PF mode (Satyanarayana K V P, 2 commits)
Derive an "admin-only PF" mode flag from xe_device state instead of
using a local flag, and restrict device query responses when running
in admin-only PF mode to avoid exposing internal state.
- Enable hwmon energy attributes and accepted power limit for CRI (2 commits)
Enable energy consumption hwmon attributes for the CRI platform and
add support for reading the accepted (sustained) power limit via
hwmon.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCafNROQAKCRC4FpNVCsYG
v31cAQCS/7wH9kwyUxQZOgs/HfuZvbgu5IyrGxaDSrHY7twRtAD7BhvkfOcyB9VK
6M2a7Y+QiVICgwjuDiwXikJalmRBmQE=
=Y9j3
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2026-04-30' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Debugfs multi-LRC engine info (Xin Wang, 2 commits)
Expose multi-LRC engine classes in the debugfs engine info output
and improve the output readability.
- drm/drm_ras: Add clear-error-counter netlink command to drm_ras
Cross-subsystem Changes:
Core Changes:
- drm/gpusvm: Reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges
- drm/i915/display: switch to including common step file directly
Driver Changes:
- Engine initialization cleanup (Matt Roper, 10 commits)
Clean up engine initialization code inherited from i915 by moving
hardware programming (CCS enablement, HWSTAM, GFX_MODE, BLIT_CCTL,
STOP_RING) into the RTP infrastructure. This makes the programming
visible and verifiable via debugfs, and applies consistently across
both normal and execlist init paths. Also fixes the name/definition
of GFX_MODE, marks BCS engines as belonging to the GT forcewake
domain, and drops the now-unused xe_hw_engine_mmio_write32() helper.
- PF fair scheduling auto-provisioning (Michal Wajdeczko, 13 commits)
Fix several corner cases in SR-IOV PF scheduling policy provisioning,
then auto-provision PF and all VFs with 16ms execution-quantum and
preemption-timeout defaults. This prevents a VF from monopolizing
the GPU by submitting workloads without gaps, without requiring the
user to configure sysfs manually.
- System Controller support for CRI/Xe3p (Anoop Vijay + Raag Jadav, 10 commits)
Add xe_sysctrl infrastructure for communicating with the System
Controller firmware entity on CRI/Xe3p discrete GPU platforms via a
mailbox interface. Includes type definitions, register definitions,
mailbox communication, initialization, power management, interrupt
handling, and event dispatch. Builds on this to add initial RAS
correctable error handling, using sysctrl interrupts to receive
threshold-crossed events.
- PXP state machine fixes (Daniele Ceraolo Spurio, 4 commits)
Fix PXP state machine handling: reject PXP sessions on PTL platforms
with older GSC firmware that does not support it, fix the restart
flag not being cleared after jumping back in pxp_start, remove
incorrect handling of an impossible state during suspend, and clean
up termination status on failure.
- Reset/wedge/unload corner case fixes (Zhanjun Dong + Matthew Brost, 5 commits)
Fix memory leaks and fence signal failures that occurred during GPU
reset, device wedging, and driver unload by forcefully tearing down
remaining exec queues in GuC submit fini, always killing queues in
pause/abort, and triggering queue cleanup when not in wedged mode 2.
Also ensures GuC CT state transitions via STOP before DISABLED.
- Wedge path memory allocation fixes (Matthew Brost, 3 commits)
Avoid GFP_KERNEL allocations in xe_device_declare_wedged(), which
runs in the DMA-fence signaling path. Also drops the
guc_submit_wedged_fini devm registration from xe_guc_submit_wedge()
to clean up the wedge shutdown sequence.
- PAT type cleanup and invalid index hardening (Xin Wang, 3 commits)
Standardize pat_index fields to u16 across the driver, default
XE_CACHE_NONE_COMPRESSION to XE_PAT_INVALID_IDX (matching
WB_COMPRESSION), and introduce xe_cache_pat_idx() — a macro helper
that validates cache_mode bounds and asserts on invalid PAT indices
before returning the index.
- Reject unsafe PAT indices for CPU cached memory (Jia Yao, 2 commits)
Reject incoherent (coh_none) PAT indices for CPU cached memory in
both the madvise ioctl and vm_bind with CPU_ADDR_MIRROR flag, closing
a security gap where the GPU could bypass CPU caches and observe
stale or sensitive data.
- OA improvements for CRI device memory (Ashutosh Dixit, 3 commits)
Move OA buffer access to the xe_map layer to support both system and
device memory (required for CRI), switch OA buffer mmap to use
drm_gem_mmap_obj, and implement workaround Wa_14026633728.
- xe_drm.h documentation fixes (Shuicheng Lin, 6 commits)
Fix multiple documentation issues in the xe_drm.h UAPI header:
typos, spelling errors, grammar, wrong names and references,
kernel-doc cross-reference syntax, and broken code examples.
- kernel-doc syntax fixes in xe headers (Shuicheng Lin, 4 commits)
Fix kernel-doc syntax issues across xe header files: missing '@'
prefixes on member tags, stale/mismatched member tags, comment
syntax errors, and type/parameter name mismatches in references.
- Buffer object and DMA-buf resource leak fixes (Shuicheng Lin, 4 commits)
Fix resource leaks on error paths: DMA-buf attachment leak in
xe_gem_prime_import(), BO leak in xe_dma_buf_init_obj() on
allocation failure, and BO leaks in xe_bo_init_locked() on GGTT
flag validation and unaligned size validation failures.
- Include guard cleanup (Shuicheng Lin, 5 commits)
Fix and standardize include guards across xe header files: normalize
double-underscore guards to single, add missing leading/trailing
underscores, add missing _H suffixes, and add guards to previously
unprotected headers.
- VF CCS memory pool (Satyanarayana K V P, 2 commits)
Switch VF CCS read/write operations from the DRM sub-allocator to
DRM mm, fixing allocation failures in fence-disabled mode where
the sub-allocator's hole cursor assumption breaks. Also introduces
a general BO-backed memory pool with shadow support using drm_mm.
- i915/xe step definition unification (Jani Nikula, 3 commits)
Complete the migration to the shared intel_step header: switch xe
from its own xe_step enum to the shared intel_step naming and
definitions, and update i915 display code to include the common
step header directly.
- Xe3p GT tuning fixes (3 commits)
Three Xe3p GT tuning corrections: fix the register offset for
GAMSTLB_CTRL, stop applying the CCCHKNREG1 tuning from Xe3p onward
(no longer needed), and mark ROW_CHICKEN5 as a masked register.
- Forcewake cleanup in GT and GuC PC (Raag Jadav, 3 commits)
Drop a redundant forcewake reference in xe_gt, reorder forcewake
usage in xe_guc_pc_fini_hw() to avoid a redundant hold, and convert
xe_guc_pc_stop() to void since it can no longer fail.
- SVM garbage collector fix on close (Matthew Brost, 2 commits)
Disable the SVM garbage collector work item when an SVM is closed
to prevent use-after-free when the GC fires after the SVM is freed.
- Admin-only PF mode (Satyanarayana K V P, 2 commits)
Derive an "admin-only PF" mode flag from xe_device state instead of
using a local flag, and restrict device query responses when running
in admin-only PF mode to avoid exposing internal state.
- Enable hwmon energy attributes and accepted power limit for CRI (2 commits)
Enable energy consumption hwmon attributes for the CRI platform and
add support for reading the accepted (sustained) power limit via
hwmon.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/afNSeZJHC3X2m3-N@fedora
The KMS framework uses two slightly different definitions for the state
concept. For a given object (plane, CRTC, encoder, etc., so
drm_$OBJECT_state), the state is the entire state of that object.
However, at the device level, drm_atomic_state refers to a state update
for a limited number of objects.
Thus, drm_atomic_state isn't the entire device state, but only the full
state of some objects in that device. This has been an endless source of
confusion and thus bugs.
We can rename the drm_atomic_state structure to drm_atomic_commit to
make it less confusing.
This patch was created using:
rg -l drm_atomic_state | \
xargs sed -i 's/drm_atomic_state/drm_atomic_commit/g; s/drm_atomic_commit_helper/drm_atomic_state_helper/g'
mv drivers/gpu/drm/tests/drm_atomic_state_test.c drivers/gpu/drm/tests/drm_atomic_commit_test.c
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260427-drm-drm-atomic-update-v4-1-c0e713bfdf25@kernel.org
The merge-commit 02e778f123 ("Merge tag 'amd-drm-next-7.1-2026-03-12' of
https://gitlab.freedesktop.org/agd5f/linux into drm-next") removes the stub
for drm_fb_helper_gem_is_fb(), so the buld gets broken if DRM_FBDEV_EMULATION
is not set.
‘drm_fb_helper_gem_is_fb’; did you mean ‘drm_fb_helper_from_client’? [-Wimplicit-function-declaration]
1777 | if (!drm_fb_helper_gem_is_fb(dev->fb_helper, fb->obj[0])) {
| ^~~~~~~~~~~~~~~~~~~~~~~
| drm_fb_helper_from_client
Restore it.
Fixes: 02e778f123 ("Merge tag 'amd-drm-next-7.1-2026-03-12' of https://gitlab.freedesktop.org/agd5f/linux into drm-next")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7b81bc38e9)
Video Format Data Blocks (VFDBs) contain the necessary information that
needs to be fed to the Optimized Video Timings (OVT) Algorithm.
Also, we require OVT support to cover modes that aren't supported by
earlier standards (e.g. CVT). So, parse all of the relevant VFDB data
and feed it to the OVT Algorithm, to extract all of the missing OVT
modes.
Suggested-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Hamza Mahfooz <someguy@effective-light.com>
Link: https://patch.msgid.link/20260225175709.408010-1-someguy@effective-light.com
Here is the char/misc/iio and other smaller driver subsystem updates for
7.1-rc1. Lots of stuff in here, all tiny, but relevant for the
different drivers they touch. Major points in here is:
- the usual large set of new IIO drivers and updates for that
subsystem (the large majority of this diffstat)
- lots of comedi driver updates and bugfixes
- coresight driver updates
- interconnect driver updates and additions
- mei driver updates
- binder (both rust and C versions) updates and fixes
- lots of other smaller driver subsystem updates and additions
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaes/Ng8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymRBQCeOqRduhONI6LPIIvDDTaircoSib0AnRD8WwML
RxHo3/WjEd7FEUqwHA+H
=Heza
-----END PGP SIGNATURE-----
Merge tag 'char-misc-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO / and others driver updates from Greg KH:
"Here is the char/misc/iio and other smaller driver subsystem updates
for 7.1-rc1. Lots of stuff in here, all tiny, but relevant for the
different drivers they touch. Major points in here is:
- the usual large set of new IIO drivers and updates for that
subsystem (the large majority of this diffstat)
- lots of comedi driver updates and bugfixes
- coresight driver updates
- interconnect driver updates and additions
- mei driver updates
- binder (both rust and C versions) updates and fixes
- lots of other smaller driver subsystem updates and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (405 commits)
coresight: tpdm: fix invalid MMIO access issue
mei: me: add nova lake point H DID
mei: lb: add late binding version 2
mei: bus: add mei_cldev_uuid
w1: ds2490: drop redundant device reference
bus: mhi: host: pci_generic: Add Telit FE912C04 modem support
mei: csc: wake device while reading firmware status
mei: csc: support controller with separate PCI device
mei: convert PCI error to common errno
mei: trace: print return value of pci_cfg_read
mei: me: move trace into firmware status read
mei: fix idle print specifiers
mei: me: use PCI_DEVICE_DATA macro
sonypi: Convert ACPI driver to a platform one
misc: apds990x: fix all kernel-doc warnings
most: usb: Use kzalloc_objs for endpoint address array
hpet: Convert ACPI driver to a platform one
misc: vmw_vmci: Fix spelling mistakes in comments
parport: Remove completed item from to-do list
char: remove unnecessary module_init/exit functions
...
atomic:
- raise the vblank timeout to avoid it on virtual drivers
- fix colorop duplication
bridge:
- stm_lvds: state check fix
- dw-mipi-dsi: bridge reference leak fix
panel:
- visionx-rm69299: init fix
dma-fence:
- fix sparse warning
dma-buf:
- UAF fix
panthor:
- mapping fix
arcgpu:
- device_node reference leak fix
nouveau:
- memory leak in error path fix
- overflow in reloc path for old hw fix
hv:
- Kconfig fix
v3d:
- infinite loop fix
-----BEGIN PGP SIGNATURE-----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=WXJa
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2026-04-24' of https://gitlab.freedesktop.org/drm/kernel
Pull more drm fixes from Dave Airlie:
"These are the regular fixes that have built up over last couple of
weeks, all pretty minor and spread all over.
atomic:
- raise the vblank timeout to avoid it on virtual drivers
- fix colorop duplication
bridge:
- stm_lvds: state check fix
- dw-mipi-dsi: bridge reference leak fix
panel:
- visionx-rm69299: init fix
dma-fence:
- fix sparse warning
dma-buf:
- UAF fix
panthor:
- mapping fix
arcgpu:
- device_node reference leak fix
nouveau:
- memory leak in error path fix
- overflow in reloc path for old hw fix
hv:
- Kconfig fix
v3d:
- infinite loop fix"
* tag 'drm-fixes-2026-04-24' of https://gitlab.freedesktop.org/drm/kernel:
drm/nouveau: fix u32 overflow in pushbuf reloc bounds check
MAINTAINERS: split hisilicon maintenance and add Yongbang Shi for hibmc-drm matainers
drm/v3d: Reject empty multisync extension to prevent infinite loop
drm/panel: visionox-rm69299: Make use of prepare_prev_first
drm/drm_atomic: duplicate colorop states if plane color pipeline in use
drm/nouveau: fix nvkm_device leak on aperture removal failure
hv: Select CONFIG_SYSFB only for CONFIG_HYPERV_VMBUS
dma-fence: Silence sparse warning in dma_fence_describe
drm/bridge: dw-mipi-dsi: Fix bridge leak when host attach fails
drm/arcpgu: fix device node leak
drm/panthor: Fix outdated function documentation
drm/panthor: Extend VM locked region for remap case to be a superset
dma-buf: fix UAF in dma_buf_put() tracepoint
drm/bridge: stm_lvds: Do not fail atomic_check on disabled connector
drm/atomic: Increase timeout in drm_atomic_helper_wait_for_vblanks()
Add mipi_dsi_shutdown_peripheral_multi function and mark
mipi_dsi_shutdown_peripheral function as deprecated.
Signed-off-by: Avinal Kumar <avinal.xlvii@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260417061842.66631-2-avinal.xlvii@gmail.com
Introduce a new 'clear-error-counter' drm_ras command to reset the counter
value for a specific error counter of a given node.
The command is a 'do' netlink request with 'node-id' and 'error-id'
as parameters with no response payload.
Usage:
$ sudo ynl --family drm_ras --do clear-error-counter --json \
'{"node-id":1, "error-id":1}'
None
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20260409073318.2909379-5-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Maxime Ripard <mripard@redhat.com>
- A patch to raise the vblank timeout to avoid it on virtual drivers
- a state check fix for stm_lvds
- a use-after-free fix for dma-buf
- a mapping fix for panthor
- a device_node reference leak fix for arcgpu
- a bridge reference leak fix for dw-mipi-dsi
- a sparse warning fix for dma-fence
- a kconfig fix for hv
- a memory leak fix for nouveau
- a fix to duplicate colorop when duplicating states
- a panel initialisation order fix for visionox-rm69299
- a fix to prevent an infinite loop for v3d
- an overflow fix for nouveau
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCaemw5QAKCRAnX84Zoj2+
dt7GAYCkTEouOPCjZdw+4v7sGvRMT4gVXA1Eqj8wQysdLwLgEMxUPRetn2PIjlJl
4fGe9AUBgNm6OsKxq8939+l8EDxAIUxl4X4noFDbIgebazcK3QmkHDjlhucu5SoA
Y7Z3hWfwdw==
=XpOi
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2026-04-23' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
This week in drm-misc-fixes, we have:
- A patch to raise the vblank timeout to avoid it on virtual drivers
- a state check fix for stm_lvds
- a use-after-free fix for dma-buf
- a mapping fix for panthor
- a device_node reference leak fix for arcgpu
- a bridge reference leak fix for dw-mipi-dsi
- a sparse warning fix for dma-fence
- a kconfig fix for hv
- a memory leak fix for nouveau
- a fix to duplicate colorop when duplicating states
- a panel initialisation order fix for visionox-rm69299
- a fix to prevent an infinite loop for v3d
- an overflow fix for nouveau
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260423-realistic-eager-reindeer-4dacf7@houat
Add devm_drm_panel_add(), devres-managed version of drm_panel_add().
It's not uncommon for the panel drivers to use devres functions for most
of the resources. Provide corresponding replacement for drm_panel_add().
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260413-waveshare-dsi-touch-v3-18-3aeb53022c32@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
If the DSI panel supports versatile lanes configuration, its driver
might require determining the number of DSI data lanes, which is usually
specified on the DSI host side of the OF graph. Add new helper as a
pair to drm_of_get_data_lanes_count_ep() that lets callers determine
number of data-lanes on the remote side of the OF graph.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260413-waveshare-dsi-touch-v3-6-3aeb53022c32@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Remove member no longer used by the scheduler core and the drivers.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20260417103744.76020-30-tvrtko.ursulin@igalia.com
Now that the run queue to scheduler relationship is always 1:1 we can
embed it (the run queue) directly in the scheduler struct and save on
some allocation error handling code and such.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20260417103744.76020-15-tvrtko.ursulin@igalia.com
Since the new FAIR policy is in general better than FIFO and almost as
good as round-robin in interactive use cases, plus the latter has not been
the default policy in a long time, we can afford to remove both and leave
just FAIR.
By doing so we can simplify the scheduler code by making the scheduler to
run queue relationship always 1:1 and remove some code.
Also, now that the FIFO policy is gone the tree of entities is not a FIFO
tree any more so rename it to just the tree.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20260417103744.76020-14-tvrtko.ursulin@igalia.com
GPUs do not always implement preemption and DRM scheduler definitely
does not support it at the front end scheduling level. This means
execution quanta can be quite long and is controlled by userspace,
consequence of which is picking the "wrong" entity to run can have a
larger negative effect than it would have with a virtual runtime based CPU
scheduler.
Another important consideration is that rendering clients often have
shallow submission queues, meaning they will be entering and exiting the
scheduler's runnable queue often.
Relevant scenario here is what happens when an entity re-joins the
runnable queue with other entities already present. One cornerstone of the
virtual runtime algorithm is to let it re-join at the head and rely on the
virtual runtime accounting and timeslicing to sort it out.
However, as explained above, this may not work perfectly in the GPU world.
Entity could always get to overtake the existing entities, or not,
depending on the submission order and rbtree equal key insertion
behaviour.
Allow interactive jobs to overtake entities already queued up for the
limited case when interactive entity is re-joining the queue after
being idle.
This gives more opportunity for the compositors to have their rendering
executed before the GPU hogs even if they have been configured with the
same scheduling priority.
To classify a client as interactive we look at its average job duration
versus the average for the whole scheduler. We can track this easily by
plugging into the existing job runtime tracking and applying the
exponential moving average window on the past submissions. Then, all other
things being equal, we let the more interactive jobs go first.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Cc: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20260417103744.76020-12-tvrtko.ursulin@igalia.com
The FAIR scheduling policy is built upon the same concepts as the well
known CFS CPU scheduler - entity run queue is sorted by the virtual GPU
time consumed by entities in a way that the entity with least vruntime
runs first.
It is able to avoid total priority starvation, which is one of the
problems with FIFO, and it also does not need for per priority run queues.
As it scales the actual GPU runtime by an exponential factor as the
priority decreases, the virtual runtime for low priority entities grows
faster than for normal priority, pushing them further down the runqueue
order for the same real GPU time spent.
Apart from this fundamental fairness, fair policy is especially strong in
oversubscription workloads where it is able to give more GPU time to short
and bursty workloads when they are running in parallel with GPU heavy
clients submitting deep job queues.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Cc: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20260417103744.76020-11-tvrtko.ursulin@igalia.com
To implement fair scheduling we need a view into the GPU time consumed by
entities. Problem we have is that jobs and entities objects have decoupled
lifetimes, where at the point we have a view into accurate GPU time, we
cannot link back to the entity any longer.
Solve this by adding a light weight entity stats object which is reference
counted by both entity and the job and hence can safely be used from
either side.
With that, the only other thing we need is to add a helper for adding the
job's GPU time into the respective entity stats object, and call it once
the accurate GPU time has been calculated.
The most convenient place to do that is the free job worker for several
reasons. Doing the accounting from the job completion callback would mean
a few locks would need to become irq safe and we would also need to worry
about out of order completions (via dma_fence_is_signaled calls which we
cannot control). In-order completions are critical for GPU time accuracy
which is currently adjusted per fence in the free worker and requires
looking at the next job in the scheduler pending list. We would also need
to add a new lock to protect the scheduler average stats update.
In contrast to those complications, having the accounting done from the
free worker is serialized by definition and all the above complications
are avoided. Downside is there is potential for a time lag between job
completions and GPU time being accounted against the entity. Since that is
partly alleviated by batch processing the completed job queue, and the
scheduling algorithm does not attempt to be completely fair, which would
even be rather impossible to achieve in the GPU world with the current
DRM scheduler design and hardware with no or poor preemption support,
this downside is not considered critical. Plus, in practice the scheduler
is also affected by worker scheduling delays from other angles too. Not
least being able to promptly feed the GPU with new work.
We therefore choose the simple option and can later consider improving
upon it if the need arises.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20260417103744.76020-9-tvrtko.ursulin@igalia.com
Round-robin being the non-default policy and unclear how much it is used,
we can notice that it can be implemented using the FIFO data structures if
we only invent a fake submit timestamp which is monotonically increasing
inside drm_sched_rq instances.
So instead of remembering which was the last entity the scheduler worker
picked we can simply bump the picked one to the bottom of the tree, which
ensures round-robin behaviour between all active queued jobs.
If the picked job was the last from a given entity, we remember the
assigned fake timestamp and use it to re-insert the job once it re-joins
the queue. This ensures the job neither overtakes all already queued jobs,
neither it goes last. Instead it keeps the position after the currently
queued jobs and before the ones which haven't yet been queued at the point
the entity left the queue.
Advantage is that we can consolidate to a single code path and remove a
bunch of code. Downside is round-robin mode now needs to lock on the job
pop path but that should not have a measurable performance impact.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20260417103744.76020-7-tvrtko.ursulin@igalia.com
Some drivers do not care on teardown whether the last jobs pending in an
entity are actually executed before teardown completed. For such
scenarios, drm_sched_entity_flush() is not the ideal function since it's
intended to wait for jobs to complete.
Make drm_sched_entity_kill() public for that use-case and update the
documentation.
Suggested-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20260415144956.272506-2-phasta@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
For suspend/resume to work correctly, do for colorop state the same we
do for plane/crtc/connector states: duplicate the state of colorops in a
color pipeline if it's in use by a given plane when suspending and
restore cached colorop states when resuming. While at it, prevent
unused-variable warning when using for_each_new_colorop_in_stage here.
Fixes: 2afc3184f3 ("drm/plane: Add COLOR PIPELINE property")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Link: https://patch.msgid.link/20260318163629.300627-1-mwen@igalia.com
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
drm_for_each_bridge_in_chain_scoped() and
drm_for_each_bridge_in_chain_from() currently get/put the bridge at each
iteration. But they don't protect the encoder chain, so it could change
(bridges added/removed) while some code is iterating over the list
itself. Such code can then derail on incorrect pointers.
To make iterations safe, augment these for_each macros to lock the encoder
chain mutex at the beginning and unlock it at the end of the loop (be it at
the end of the list, or earlier due to a 'break' or 'return' statement).
This change requires more operations when starting and ending the loop. To
avoid making the macros even more complex, move these operations to helper
functions. Also remname some of the existing helper functions for
consistency.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patch.msgid.link/20260324-drm-bridge-alloc-encoder-chain-mutex-v5-4-8bf786c5c7e6@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The per-encoder bridge chain is currently assumed to be static once it is
fully initialized. Work is in progress to add hot-pluggable bridges,
breaking that assumption.
With bridge removal, the encoder chain can change without notice, removing
tail bridges. This can be problematic while iterating over the chain.
Add a mutex to be taken whenever looping or changing the encoder chain.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patch.msgid.link/20260324-drm-bridge-alloc-encoder-chain-mutex-v5-1-8bf786c5c7e6@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
With the fb pinning stuff directly returning the fence_id
there is no longer any need for the vma parent interface.
Get rid of it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260407170942.16515-2-ville.syrjala@linux.intel.com
The initial plane vblank wait operates on display registers,
so it really belongs in the display code proper. Move it there.
We can use intel_parent_irq_enabled() to determine if we can
rely on interrupts or not.
On average we should end up waiting half a frame here, so the
polling interval can be fairly long. 1 ms (which actually
makes poll_timeout_us() use ~250-1000 usec) seems good enough
to me.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260410150449.9699-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The "plane_config" vs. "plane_configs" naming difference is very
subtle, making it far too easy to use the wrong thing by accident.
Introduce a separate type for the array, making it impossible to
pass in the wrong thing. And while at it name the variable
"all_plane_configs" to help the poor reader make sense of things.
The .config_fini() prototype also mistakenly used the plural
form despite only taking in a singular plane_config. So fix that
one up as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260410150449.9699-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The meaning of this flag may not be obvious at first sight.
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # TQMa8MPxL/MBa8MPxL
Tested-by: Damon Ding <damon.ding@rock-chips.com> # rk3399
Link: https://patch.msgid.link/20260407-drm-lcdif-dbanc-v4-5-247a16e61ef9@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Uniformly, move the next bridge attachment to the Analogix side
rather than scattered on Rockchip and Exynos sides. It can also
help get rid of the callback &analogix_dp_plat_data.attach() and
make codes more concise.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> # rk3588
Link: https://patch.msgid.link/20260413132551.1049307-7-damon.ding@rock-chips.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Since the panel/bridge should logically be positioned behind the
Analogix bridge in the display pipeline, it makes sense to handle
the panel/bridge parsing on the Analogix side. Therefore, we add
a new API analogix_dp_finish_probe(), which combines the panel/bridge
parsing with component addition, to do it.
In order to process component binding right after the probe completes,
the &analogix_dp_plat_data.ops is newly added to pass &component_ops,
for which the &dp_aux_ep_device_with_data.done_probing() of DP AUX bus
only supports passing &drm_dp_aux.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> # rk3588
Link: https://patch.msgid.link/20260413132551.1049307-4-damon.ding@rock-chips.com
[Luca: propagate 'depends on OF' to DRM_ANALOGIX_DP and reverse dependencies]
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
All current users of DRM pagemap set source_peer_migrates to true during
migration, and it is unclear whether any user would ever want to disable
this for performance reasons or for features such as compression. It is
also questionable whether this flag could be made to work with
high-speed fabric mapping APIs.
Drop the flag and make DRM pagemap unconditionally assume that
source_peer_migrates is true.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patch.msgid.link/20260410205929.3914474-3-matthew.brost@intel.com
The dma-map IOVA alloc, link, and sync APIs perform significantly better
than dma-map / dma-unmap, as they avoid costly IOMMU synchronizations.
This difference is especially noticeable when mapping a 2MB region in
4KB pages.
Use the IOVA alloc, link, and sync APIs for GPU SVM, which create DMA
mappings between the CPU and GPU.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20260410205929.3914474-2-matthew.brost@intel.com
drm_connector_attach_hdr_output_metadata_property() always returns zero,
since drm_object_attach_property() returns void. No caller checks the
return value, so change the return type to void.
Also fix a typo in the kerneldoc ("HDR_OUTPUT_METADA" -> "HDR_OUTPUT_METADATA").
Reviewed-by: Melissa Wen <mwen@igalia.com>
Link: https://patch.msgid.link/20260330133446.3265938-2-mcanal@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
For both Rockchip and Exynos sides, the struct drm_connector* is
never used in callback &analogix_dp_plat_data.attach(). After
applying drm_bridge_connector helper, this parameter will no longer
be used at all.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260409065301.446670-10-damon.ding@rock-chips.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
As suggested by Dmitry, the DRM legacy bridge driver can be pulled
out of imx/ subdir for multi-platform use. The driver is also renamed
to make it more generic and suitable for platforms other than i.MX.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> # rk3588
Link: https://patch.msgid.link/20260409065301.446670-3-damon.ding@rock-chips.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
In order to move the panel/bridge parsing and attachmenet to the
Analogix side, add component struct drm_bridge *next_bridge to
platform data struct analogix_dp_plat_data.
The movement makes sense because the panel/bridge should logically
be positioned behind the Analogix bridge in the display pipeline.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> # rk3588
Link: https://patch.msgid.link/20260409065301.446670-2-damon.ding@rock-chips.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Since the PCI registers are used from both i915 display and core, move
intel_pci_config.h to include/drm/intel/pci_config.h. Drop the intel_
prefix from the name to reduce tautology.
With this, we can drop the corresponding xe display compat header.
v2: Rebase
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/5aac6c711c3f0a09fc52f322455a4a4b35f80a82.1775590536.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Since the mchbar registers are used from both i915 display and core,
move intel_mchbar_regs.h to include/drm/intel/mchbar_regs.h. Drop the
intel_ prefix from the name to reduce tautology.
With this, we can drop the corresponding xe display compat header.
v2: Rebase
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/6c951b2c05db74ea517d52a3912986f7eb886422.1775590536.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This is an initial port of the TTM pools for
write combined and uncached pages to use the list_lru.
This makes the pool's more NUMA aware and avoids
needing separate NUMA pools (later commit enables this).
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Add api to check panel replay optimization supported or not to
drm-core DP tunneling framework which can be used by other driver
as well.
v2: Split generic drm changes from Intel specific changes. [Jouni]
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Suggested-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Acked-by: Maarten Lankhorst <dev@lankhorst.se>
Link: https://patch.msgid.link/20260330133620.3750559-2-animesh.manna@intel.com
The second Late Binding version allows to send payload bigger
than client MTU by splitting it to chunks and uses separate
firmware client for transfer.
The component interface is unchanged and driver doing all splitting.
Only one Late Binding version is supported by firmware.
When Late binding version 2 is supported, the new client is advertised
by firmware and existing MKHI will have version 2.
This helps driver to select the right mode of work.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260405112326.1535208-3-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Parse the AMD VSDB v3 from CTA extension blocks and store the result
in struct drm_amd_vsdb_info, a new field of drm_display_info. This
includes replay mode, panel type, and luminance ranges.
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Changes for v7.1
CI:
- Uprev mesa
- Restore CI jobs for Qualcomm APQ8016 and APQ8096 devices
Core:
- Switched to of_get_available_child_by_name()
DPU:
- Fixes for DSC panels
- Fixed brownout because of the frequency / OPP mismatch
- Quad pipe preparation (not enabled yet)
- Switched to virtual planes by default
- Dropped VBIF_NRT support
- Added support for Eliza platform
- Reworked alpha handling
- Switched to correct CWB definitions on Eliza
- Dropped dummy INTF_0 on MSM8953
- Corrected INTFs related to DP-MST
DP:
- Removed debug prints looking into PHY internals
DSI:
- Fixes for DSC panels
- RGB101010 support
- Support for SC8280XP
- Moved PHY bindings from display/ to phy/
GPU:
- Preemption support for x2-85 and a840
- IFPC support for a840
- SKU detection support for x2-85 and a840
- Expose AQE support (VK ray-pipeline)
- Avoid locking in VM_BIND fence signaling path
- Fix to avoid reclaim in GPU snapshot path
- Disallow foreign mapping of _NO_SHARE BOs
- Couple a6xx gpu snapshot fixes
- Various other fixes
HDMI:
- Fixed infoframes programming
MDP5:
- Dropped support for MSM8974v1
- Dropped now unused code for MSM8974 v1 and SDM660 / MSM8998
Also misc small fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <rob.clark@oss.qualcomm.com>
Link: https://patch.msgid.link/CACSVV012vn73BaUfk=Hw4WkQHZNPHiqfifWEunAqMc2EGOWUEQ@mail.gmail.com
Move the driver specific fbdev fb calls to the display parent
interface. Reuse the existing struct intel_display_bo_interface, as this
is mostly about gem objects.
Put everything behind IS_ENABLED(CONFIG_DRM_FBDEV_EMULATION) to catch
configuration issues at build or link time.
v2: Rebase
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com> # v1
Link: https://patch.msgid.link/a6bb24909a58181cfc41b91a4c6538a181d27158.1774950508.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Move vlv_iosf_sb_reg.h to include/drm/intel/vlv_iosf_sb_regs.h. Use
_regs.h suffix to align better with other register headers. Move enum
vlv_iosf_sb_unit there as well, breaking the final include tie related
to IOSF sideband between display and i915 core.
With this, we can completely remove the xe compat vls_iosf_sb*.h
headers.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/41b060b0d6453de39ca775eab10ee12b25c45b7d.1774957233.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Parse the AMD VSDB v3 from CTA extension blocks and store the result
in struct drm_amd_vsdb_info, a new field of drm_display_info. This
includes replay mode, panel type, and luminance ranges.
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260327082342.1286878-2-chen-yu.chen@amd.com
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
drm/i915 feature pull #2 for v7.1:
Refactoring and cleanups:
- Refactor LT PHY PLL handling to use the DPLL framework (Mika)
- Implement display register polling and waits in display code (Ville)
- Move PCH clock gating in display PCH file (Luca)
- Add shared stepping info header for i915 and display (Jani)
- Clean up GVT I2C command decoding (Jonathan)
- NV12 plane unlinking cleanups (Ville)
- Clean up NV12 DDB/watermark handling for pre-ICL platforms (Ville)
Fixes:
- An assortment of DSI fixes (Ville)
- Handle PORT_NONE in assert_port_valid() (Jonathan)
- Fix link failure without FBDEV emulation (Arnd Bergmann)
- Quirk disable panel replay on certain Dell XPS models (Jouni)
- Check if VESA DPCD AUX backlight is possible (Suraj)
Other:
- Mailmap update for Christoph (Christoph)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/i915/display/intel_plane.c
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/ac9dfdb745d5a67c519ea150a6f36f8f74b8760e@intel.com
UAPI Changes:
amdxdna:
- support per-BO memory-usage queries
docs:
- Improve UAPI documentation
panthor:
- extend timestamp query with flags
Core Changes:
edid:
- provide enum drm_output_color_format; mass-convert drivers
gem-dma:
- use drm_dev_dma_dev() for DMA mappings
- set VM_DONTDUMP on mmap
mipi-dbi:
- drop simple-display; mass-convert drivers
prime:
- use drm_dev_dma_dev() for DMA mappings
ttm:
- improve handling of gfp_retry_mayfail
Driver Changes:
amdgpu:
- use atomic_create_state for private_obj
amdxdna:
- refactor GEM implementation
- fixes
bridge:
- provide clear-and-put helper for reliable cleanup
- analogix_dp: Use DP helpers for link training
- lontium-lt8713sx: Fix 64-bit division and Kconfig
- samsung-dsim: Use clear-and-put
imagination:
- improve power-off sequence
- support context-reset notification from firmware
komeda:
- support Arm China Linlon D6 plus DT bindings
mediatek:
- use drm_dev_dma_dev() for DMA mappings
panel:
- support Himax HX83121A plus DT bindings
- support JuTouch JT070TM041 plus DT bindings
- support Samsung S6E8FC0 plus DT bindings
- himax-hx83102c: support Samsung S6E8FC0 plus DT bindings; support backlight
- ili9806e: support Rocktech RK050HR345-CT106A plus DT bindings
- simple: support Tianma TM050RDH03 plus DT bindings
panthor:
- support various sources for timestamp queries
- fixes
omapdrm:
- use atomic_create_state for private_obj
rcar-du:
- fix suspend/resume wrt VSP interface
- fix leak of device_link
- clean up
sun4i:
- use drm_dev_dma_dev() for DMA mappings
tegra:
- use atomic_create_state for private_obj
xe:
- send 'none' recovery method for XE_WEDGED_MODE_UPON_ANY_HANG_NO_RESET
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmnFTdMbFIAAAAAABAAO
bWFudTIsMi41KzEuMTIsMiwyAAoJEGgNwR1TC3ojLroIAIXl6jA6VBER5JztfXb7
e0mjOTPDejI2q/WA/s7cUIYsKI26eFiTjWKJlrqtewgwhviNkv3oB9MwHIrMjreB
QP9KMMfwfKFUpP/cXDyqFyMMuXPcdZYft0i38Donjg/l6t5LrZs5nt3or8nbN0H3
4myXUHiCU0N/Zvi4NAKWacfUrEof5JwsxEuCD6USIPkyq8M4M938nmWAElmm6gQu
zl+916jQ9Y7WRyjF2H/2XgBPIEQdvQwlkSCeY4yRbDdHVFCpq2Pepiq8L3c1uoBw
KoCR/92oyM+Q1bbpKFVXGDMgY9xSEvdmqzr5aKqJKT7ouBEUPYxvTlb0jtV/NHqy
7Ak=
=Iwpj
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2026-03-26' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.1:
UAPI Changes:
amdxdna:
- support per-BO memory-usage queries
docs:
- Improve UAPI documentation
panthor:
- extend timestamp query with flags
Core Changes:
edid:
- provide enum drm_output_color_format; mass-convert drivers
gem-dma:
- use drm_dev_dma_dev() for DMA mappings
- set VM_DONTDUMP on mmap
mipi-dbi:
- drop simple-display; mass-convert drivers
prime:
- use drm_dev_dma_dev() for DMA mappings
ttm:
- improve handling of gfp_retry_mayfail
Driver Changes:
amdgpu:
- use atomic_create_state for private_obj
amdxdna:
- refactor GEM implementation
- fixes
bridge:
- provide clear-and-put helper for reliable cleanup
- analogix_dp: Use DP helpers for link training
- lontium-lt8713sx: Fix 64-bit division and Kconfig
- samsung-dsim: Use clear-and-put
imagination:
- improve power-off sequence
- support context-reset notification from firmware
komeda:
- support Arm China Linlon D6 plus DT bindings
mediatek:
- use drm_dev_dma_dev() for DMA mappings
panel:
- support Himax HX83121A plus DT bindings
- support JuTouch JT070TM041 plus DT bindings
- support Samsung S6E8FC0 plus DT bindings
- himax-hx83102c: support Samsung S6E8FC0 plus DT bindings; support backlight
- ili9806e: support Rocktech RK050HR345-CT106A plus DT bindings
- simple: support Tianma TM050RDH03 plus DT bindings
panthor:
- support various sources for timestamp queries
- fixes
omapdrm:
- use atomic_create_state for private_obj
rcar-du:
- fix suspend/resume wrt VSP interface
- fix leak of device_link
- clean up
sun4i:
- use drm_dev_dma_dev() for DMA mappings
tegra:
- use atomic_create_state for private_obj
xe:
- send 'none' recovery method for XE_WEDGED_MODE_UPON_ANY_HANG_NO_RESET
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260326151812.GA76082@linux.fritz.box
Deprecate simple-encoder and simple-display-pipe helpers in favor of
regular atomic helpers. Remove the related documentation. Add TODO
item for converting the remaining drivers.
These helpers have been deprecated for years and many drivers have
been updated to not use them. Still there are a few left and we
occasionally receive new drivers build upon them. Marking them as
deprecated will hopefully resolve these problems. The TODO items
should be easy enough for getting new voluteers started on DRM driver
development.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260319160110.109610-17-tzimmermann@suse.de
With the conversion to regular atomic helpers, mipi-dbi's support
for simple-display helpers is unused. Removed it.
v2:
- remove unused connector from struct mipi_dbi_dev
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260319160110.109610-16-tzimmermann@suse.de
Refactor the existing simple-display callbacks such that they invoke
helpers compatible with regular atomic modesetting. Allows for adding
mipi-dbi drives that do not require simple-display helpers.
Provide initializer macro for elements of the regular modesetting
pipeline. These will be used by drivers to integrate mipi-dbi helpers.
Also provide initializer macros for the plane formats.
As the new helpers are DRM functions, add the drm_ prefix. Mipi-dbi
interfaces currently lack this.
v3:
- fix uninitialized variable (David)
- document public interfaces (David)
- mention format macros in commit message (David)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260319160110.109610-4-tzimmermann@suse.de
Initialize the mipi-dbi device with drm_mipi_dbi_dev_init() without
creating a modesetting pipeline. Will allow for mipi-dbi drivers
without simple-display helpers.
As the new helper is a DRM function, add the drm_ prefix. Mipi-dbi
interfaces currently lack this.
v3:
- document tx_buf_size parameter (David)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260319160110.109610-3-tzimmermann@suse.de
Use drm_atomic_helper_commit_tail_rpm() as commit tail to update the
plane after enabling the CRTC. Then remove the plane-update code from
mipi_dbi_enable_flush() and inline the remaining backlight code where
necessary.
Mipi-dbi's current commit tail drm_atomic_helper_commit_tail() first
updates the plane and then enables the CRTC. But the CRTC enablement
includes power management that prevents the initial plane update from
working. Hence, each mipi-dbi driver includes a plane update in their
CRTC enablement; in the form of mipi_dbi_enable_flush() or custom code.
Using drm_atomic_helper_commit_tail_rpm() enables the CRTC before any
plane updates. Hence the additional plane update can be removed from
mipi_dbi_enable_flush() and a number of drivers.
This leaves backlight_enable() in the helper, which can now be inlined
into affected drivers. Drivers now enable the CRTC plus an optional
backlight and then automatically update the plane.
In the case of disabling the display, drm_atomic_helper_commit_tail_rpm()
only disables the CRTC without touching the plane at all. Mipi-dbi's
mipi_dbi_pipe_disable() already contains the necessary logic.
Removing the plane update from the CRTC enablement will also help with
converting mipi-dbi from simple-pipe helpers to regular atomic helpers.
v3:
- st7586: remove unused variable
v2:
- ili9225: remove unused variables (David)
- st7586: remove unused variables (David)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260319160110.109610-2-tzimmermann@suse.de
Add MIPI_DSI_FMT_RGB101010 for 30 bit (10,10,10 RGB) pixel format,
corresponding to the packed 30 bit pixel stream defined in MIPI DSI
v1.3 Section 8.8.17.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Patchwork: https://patchwork.freedesktop.org/patch/713714/
Link: https://lore.kernel.org/r/20260324-dsi-rgb101010-support-v5-1-ff6afc904115@pm.me
[Acked by Maxime to be merged through msm-next on IRC on dri-devel]
[DB: moved RGB101010 to the end of enum mipi_dsi_pixel_format]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The hdmi_colorspace enum was defined to represent the colorspace value
of the HDMI infoframes. It was later used by some HDMI drivers to
express the output format they should be setting up.
During the introduction of the HDMI helpers, it then was used to
represent it in the drm_connector_hdmi_state structure.
However, it's always been somewhat redundant with the DRM_COLOR_FORMAT_*
defines, and now with the drm_output_color_format enum. Let's
consolidate around drm_output_color_format in drm_connector_hdmi_state
to facilitate the current effort to provide a global output format
selection mechanism.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260305-drm-rework-color-formats-v3-14-f3935f6db579@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Now that all users of DRM_COLOR_FORMAT_* defines have been converted to
the new enum, we can get rid of those defines.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260305-drm-rework-color-formats-v3-13-f3935f6db579@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The EDID parsing code initially introduced the DRM_COLOR_FORMAT_*
defines to represent the sink capabilities. Since a given sink could
support multiple formats, it was first defined as a bitmask.
However, the core and drivers have since leveraged those defines to
represent both the supported formats but also the current format being
used.
Considering the latter case, the more natural, and consistent, thing to
do would be to create an enum of all the possible formats, and then list
the supported formats using a bitmask of the individual enum values.
Let's create a new enum following that pattern, drm_output_color_format,
while maintaining the DRM_COLOR_FORMAT_* compatibility to make the
transition easier.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260305-drm-rework-color-formats-v3-1-f3935f6db579@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Our xe-vfio-pci component relies on the confirmation from the PF
that VF FLR processing has finished, but due to the notification
latency on the HW/FW side, PF might be unaware yet of the already
triggered VF FLR.
Update VF state machine with new FLR_PREPARE state that indicate
imminent VF FLR notification and treat that as a begin of the FLR
sequence. Also introduce function that xe-vfio-pci should call to
guarantee correct synchronization.
v2: move PREPARE into WIP, update commit msg (Michal)
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Co-developed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patch.msgid.link/20260309152449.910636-2-piotr.piorkowski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Drivers having a struct drm_bridge pointer pointing to a bridge in many
cases hold that reference until the owning device is removed. In those
cases the reference to the bridge can be put in the .remove callback
(possibly using devm actions) or in the .destroy func (possibly with the
help of struct drm_bridge::next_bridge). At those moments the driver should
not be operating anymore and won't dereference the bridge pointer after it
is put.
However there are cases when drivers need to stop holding a reference to a
bridge even when their device is not being removed. This is the case for
bridge hot-unplug, when a bridge is removed but the previous entity (bridge
or encoder) is staying. In such case the "previous entity" needs to put it
but cannot do it via devm or .destroy, because it is not being removed.
The easy way to dispose of such pointer is:
drm_bridge_put(my_priv->some_bridge);
my_priv->some_bridge = NULL;
However this is risky because there is a time window between the two lines
where the reference is put, and thus the bridge could be deallocated, but
the pointer is still assigned. If other functions of the same driver were
invoked concurrently they might dereference my_priv->some_bridge during
that window, resulting in use-after-free.
A correct solution is to clear the pointer before putting the reference,
but that needs a temporary variable:
struct drm_bridge *temp = my_priv->some_bridge;
my_priv->some_bridge = NULL;
drm_bridge_put(temp);
This solution is however annoying to write, so the incorrect version might
still sneak in.
Add a simple, easy to use function to put a bridge after setting its
pointer to NULL in the correct way.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260310-drm-bridge-atomic-vs-remove-clear_and_put-v2-1-51fe222f3cf0@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Update the kerneldoc with a more elaborate description of some members,
including the gfp_retry_mayfail member. Use inline kerneldoc.
Suggested-by: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Maarten Lankhorst <dev@lankhorst.se>
Acked-by: Christian König <christian.koening@amd.com>
Link: https://patch.msgid.link/20260317141856.237876-4-thomas.hellstrom@linux.intel.com
In situations where the system is very short on RAM, the shmem
readback from swap-space may invoke the OOM killer.
However, since this might be a recoverable situation where the caller
is indicating this by setting
struct ttm_operation_ctx::gfp_retry_mayfail to true, adjust the gfp
value used by the allocation accordingly.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Maarten Lankhorst <dev@lankhorst.se>
Acked-by: Christian König <christian.koening@amd.com>
Link: https://patch.msgid.link/20260317141856.237876-3-thomas.hellstrom@linux.intel.com
Now that all drm_private_objs users have been converted to use
atomic_create_state instead of the old ad-hoc initialization, we can
remove the state parameter from drm_private_obj_init and the fallback
code.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260224-drm-private-obj-reset-v5-4-5a72f8ec9934@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Some display controllers can be hardware programmed to show non-black
colors for pixels that are either not covered by any plane or are
exposed through transparent regions of higher planes. This feature can
help reduce memory bandwidth usage, e.g. in compositors managing a UI
with a solid background color while using smaller planes to render the
remaining content.
To support this capability, introduce the BACKGROUND_COLOR standard DRM
mode property, which can be attached to a CRTC through the
drm_crtc_attach_background_color_property() helper function.
Additionally, define a 64-bit ARGB format value to be built with the
help of a couple of dedicated DRM_ARGB64_PREP*() helpers. Individual
color components can be extracted with desired precision using the
corresponding DRM_ARGB64_GET*() macros.
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260303-rk3588-bgcolor-v8-2-fee377037ad1@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
Add .framebuffer_init, .framebuffer_fini and .framebuffer_lookup to the
bo parent interface. While they're about framebuffers, they're
specifically about framebuffer objects, so the bo interface is a good
enough fit, and there's no need to add another interface struct.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/848d32a44bf844cba3d66e44ba9f20bea4a8352d.1773238670.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Continue i915 and xe separation from display by moving the bo calls to
the display parent interface. Instead of adding all these functions to
intel_parent.[ch], reuse the now vacated intel_bo.[ch], and avoid mass
renames to calls of these functions. This is similar to
intel_display_rpm.[ch].
Make many of the hooks optional to avoid having to implement dummy
functions in xe. Indeed now we can remove many of the existing dummy
functions.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/7899eef2ccf0cd603df69099df065226a0df917b.1773238670.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
amdgpu:
- SMU13 fix
- SMU14 fix
- Fixes for bring up hw testing
- Kerneldoc fix
- GC12 idle power fix for compute workloads
- DCCG fixes
- UserQ fixes
- Move test for fbdev object to a generic helper
- GC 12.1 updates
- Use struct drm_edid in non-DC code
- Include IP discovery data in devcoredump
- SMU 13.x updates
- Misc cleanups
- DML 2.1 fixes
- Enable NV12/P010 support on primary planes
- Enable color encoding and color range on overlay planes
- DC underflow fixes
- HWSS fast path fixes
- Replay fixes
- DCN 4.2 updates
- Support newer IP discovery tables
- LSDMA 7.1 support
- IH 7.1 fixes
- SoC v1 updates
- GC12.1 updates
- PSP 15 updates
- XGMI fixes
- GPUVM locking fix
amdkfd:
- Fix missing BO unreserve in an error path
radeon:
- Move test for fbdev object to a generic helper
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQgO5Idg2tXNTSZAr293/aFa7yZ2AUCabMItwAKCRC93/aFa7yZ
2BiwAQD3yQsA6xuspaMXduQwFE0tu6rL6bB+NSB7bfM2YYdE1AEAqi2GQPOlfohH
DK/zb58ZPoeJfCdShPPQ85cSkPSu2wY=
=OtzL
-----END PGP SIGNATURE-----
Merge tag 'amd-drm-next-7.1-2026-03-12' of https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-7.1-2026-03-12:
amdgpu:
- SMU13 fix
- SMU14 fix
- Fixes for bring up hw testing
- Kerneldoc fix
- GC12 idle power fix for compute workloads
- DCCG fixes
- UserQ fixes
- Move test for fbdev object to a generic helper
- GC 12.1 updates
- Use struct drm_edid in non-DC code
- Include IP discovery data in devcoredump
- SMU 13.x updates
- Misc cleanups
- DML 2.1 fixes
- Enable NV12/P010 support on primary planes
- Enable color encoding and color range on overlay planes
- DC underflow fixes
- HWSS fast path fixes
- Replay fixes
- DCN 4.2 updates
- Support newer IP discovery tables
- LSDMA 7.1 support
- IH 7.1 fixes
- SoC v1 updates
- GC12.1 updates
- PSP 15 updates
- XGMI fixes
- GPUVM locking fix
amdkfd:
- Fix missing BO unreserve in an error path
radeon:
- Move test for fbdev object to a generic helper
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260312184425.3875669-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
This new helper helps ensure all accesses to zone_device_data use the
correct API whether the page is part of a folio or not.
v2:
- Move to drm_pagemap.h, stick to folio_zone_device_data (Matthew Brost)
- Return struct drm_pagemap_zdd * (Matthew Brost)
v3:
- Add stub for !CONFIG_ZONE_DEVICE (CI)
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: linux-mm@kvack.org
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260312192126.2024853-3-francois.dugast@intel.com
Move the get/put/ref/flush_for_display calls to the display parent
interface.
For i915, move the hooks next to the other i915 core frontbuffer code in
i915_gem_object_frontbuffer.c. For xe, add new file xe_frontbuffer.c for
the same.
Note: The intel_frontbuffer_flush() calls from
i915_gem_object_frontbuffer.c will partially route back to i915 core via
the parent interface. This is less than stellar.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patch.msgid.link/f69b967ed82bbcfd60ffa77ba197b26a1399f09f.1772475391.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Provide a generic helper that tests if fbdev emulation is backed by
a specific GEM object. Not all drivers use client buffers (yet), hence
also test against the first GEM object in the fbdev framebuffer.
Convert amdgpu. The helper will also be useful for radeon.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduces the DRM RAS infrastructure over generic netlink.
The new interface allows drivers to expose RAS nodes and their
associated error counters to userspace in a structured and extensible
way. Each drm_ras node can register its own set of error counters, which
are then discoverable and queryable through netlink operations. This
lays the groundwork for reporting and managing hardware error states
in a unified manner across different DRM drivers.
Currently it only supports error-counter nodes. But it can be
extended later.
The registration is also not tied to any drm node, so it can be
used by accel devices as well.
It uses the new and mandatory YAML description format stored in
Documentation/netlink/specs/. This forces a single generic netlink
family namespace for the entire drm: "drm-ras".
But multiple-endpoints are supported within the single family.
Any modification to this API needs to be applied to
Documentation/netlink/specs/drm_ras.yaml before regenerating the
code:
$ tools/net/ynl/pyynl/ynl_gen_c.py --spec \
Documentation/netlink/specs/drm_ras.yaml --mode uapi --header \
-o include/uapi/drm/drm_ras.h
$ tools/net/ynl/pyynl/ynl_gen_c.py --spec \
Documentation/netlink/specs/drm_ras.yaml --mode kernel \
--header -o drivers/gpu/drm/drm_ras_nl.h
$ tools/net/ynl/pyynl/ynl_gen_c.py --spec \
Documentation/netlink/specs/drm_ras.yaml \
--mode kernel --source -o drivers/gpu/drm/drm_ras_nl.c
Cc: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: netdev@vger.kernel.org
Co-developed-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/20260304074412.464435-8-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add a shared header that's used by i915, xe, and i915 display.
This allows us to drop the compat-i915-headers/i915_reg_defs.h include
from xe_reg_defs.h. All the register macro helpers were subtly pulled in
from i915 to all of xe through this.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/fcd70f3317755bf98a6e7ae88974aa8ba06efd1e.1772042022.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
It's unclear what the direction of the VMA abstraction in the parent
interface should be, but convert i915_vma_fence_id() to parent interface
for starters. This paves the way for making struct i915_vma opaque
towards display.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/036f4b2d20cc1b0a7ab814beb5bb914c53b6eb53.1772212579.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The helper drm_client_buffer_create() will be required by various
drivers for fbdev emulation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patch.msgid.link/20260206133458.226467-2-tzimmermann@suse.de
Convert the direct i915_overlay_*() calls from the display
side to go over a new parent interface instead.
v2: Correctly handle the ERR_PTR returned by
i915_overlay_obj_lookup() (Jani)
v3: Rebase due to the NULL check in intel_overlay_cleanup()
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260226130150.16816-1-ville.syrjala@linux.intel.com
struct i915_address_space is used in an opaque fashion in the display
parent interface, but it's just one include away from being
non-opaque. And anyway the name is rather specific.
Switch to using the struct intel_dpt instead, which embeds struct
i915_address_space anyway. With the definition hidden in i915_dpt.c,
this can't be accidentally made non-opaque, and the type seems rather
more generic anyway.
We do have to add a new helper i915_dpt_to_vm(), as there's one case in
intel_fb_pin_to_dpt() that requires direct access to struct
i915_address_space. But this just underlines the point about opacity.
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patch.msgid.link/daa39178c0b0305b010564952d691f06e3cd63ca.1772030909.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In the implementation and integration of the SoC, the DW DisplayPort
hardware block can be configured to work in single, dual, quad pixel
mode on differnt platforms, so make the pixel mode set by plat_data
to support the upcoming rk3576 variant.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260206010421.443605-3-andyshrk@163.com
drm_suballoc_new() currently both allocates the SA object using kmalloc()
and searches for a suitable hole in the sub-allocator for the requested
size. If SA allocation is done by holding sub-allocator mutex, this design
can lead to reclaim safety issues.
By splitting the kmalloc() step outside of the critical section, we allow
the memory allocation to use GFP_KERNEL (reclaim-safe) while ensuring that
the initialization step that holds reclaim-tainted locks (sub-allocator
mutex) operates in a reclaim-unsafe context with pre-allocated memory.
This separation prevents potential deadlocks where memory reclaim could
attempt to acquire locks that are already held during the sub-allocator
operations.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Maarten Lankhorst <dev@lankhorst.se>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <dev@lankhorst.se>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260220055519.2485681-6-satyanarayana.k.v.p@intel.com
Passing a structure by value into a function is sometimes problematic,
for a number of reasons. Of of these is a warning from the 32-bit arm
compiler:
drivers/gpu/drm/drm_gpusvm.c: In function '__drm_gpusvm_unmap_pages':
drivers/gpu/drm/drm_gpusvm.c:1152:33: note: parameter passing for argument of type 'struct drm_pagemap_addr' changed in GCC 9.1
1152 | dpagemap->ops->device_unmap(dpagemap,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1153 | dev, *addr);
| ~~~~~~~~~~~
This particular problem is harmless since we are not mixing compiler versions
inside of the compiler. However, passing this by reference avoids the warning
along with providing slightly better calling conventions as it avoids an
extra copy on the stack.
Fixes: 75af93b3f5 ("drm/pagemap, drm/xe: Support destination migration over interconnect")
Fixes: 2df55d9e66 ("drm/xe: Support pcie p2p dma as a fast interconnect")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20260216134644.1025365-1-arnd@kernel.org
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit 95162db020)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Passing a structure by value into a function is sometimes problematic,
for a number of reasons. Of of these is a warning from the 32-bit arm
compiler:
drivers/gpu/drm/drm_gpusvm.c: In function '__drm_gpusvm_unmap_pages':
drivers/gpu/drm/drm_gpusvm.c:1152:33: note: parameter passing for argument of type 'struct drm_pagemap_addr' changed in GCC 9.1
1152 | dpagemap->ops->device_unmap(dpagemap,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1153 | dev, *addr);
| ~~~~~~~~~~~
This particular problem is harmless since we are not mixing compiler versions
inside of the compiler. However, passing this by reference avoids the warning
along with providing slightly better calling conventions as it avoids an
extra copy on the stack.
Fixes: 75af93b3f5 ("drm/pagemap, drm/xe: Support destination migration over interconnect")
Fixes: 2df55d9e66 ("drm/xe: Support pcie p2p dma as a fast interconnect")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20260216134644.1025365-1-arnd@kernel.org
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Move VLV_IRQ_REGS to common header for interrupt to make
intel_display_irq.c free from including i915_reg.h.
v2: Move interrupt to dedicated header (Jani)
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260205094341.1882816-18-uma.shankar@intel.com
Move FW_BLC_SELF to common header to make i9xx_wm.c
free from i915_reg.h include. Introduce a common
intel_gmd_misc_regs.h to define common miscellaneous
register definitions across graphics and display.
v3: MISC header included as needed, drop from i915_reg (Jani)
v2: Introdue a common misc header for GMD
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260205094341.1882816-13-uma.shankar@intel.com
Move GEN2_ISR and some interrupt definitions to common header.
This removes dependency of i915_reg.h from intel_overlay.c.
v3: Rename interrupt header with regs suffix (Jani)
v2: Create a separate file for common interrupts (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20260205094341.1882816-11-uma.shankar@intel.com
There are certain register definitions which are commonly shared
by i915, xe and display. Extract the same to a common header to
avoid duplication.
Move GEN6_PCODE_MAILBOX to common pcode header to make intel_cdclk.c
free from including i915_reg.h.
v3: Include pcode header as required, instead in i915_reg.h (Jani)
v2: Make the header granular and per feature (Jani)
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260205094341.1882816-6-uma.shankar@intel.com
Now that we have an atomic_create_state callback for drm_private_objs,
we can provide a helper for it.
It's somewhat different from the other similar helpers though, because
we definitely expect drm_private_obj to be subclassed. It wouldn't make
sense for a driver to use it as-is.
So we can't provide a straight implementation of the atomic_create_state
callback, but rather we provide the parts that will deal with the
drm_private_obj initialization, and we will leave the allocation and
initialization of the subclass to drivers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260128-drm-private-obj-reset-v4-3-90891fa3d3b0@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The drm_private_obj initialization was inconsistent with the rest of the
KMS objects. Indeed, it required to pass a preallocated state in
drm_private_obj_init(), while all the others objects would have a reset
callback that would be called later on to create the state.
However, reset really is meant to reset the hardware and software state.
That it creates an initial state is a side-effect that has been used in
all objects but drm_private_obj. This is made more complex since some
drm_private_obj, the DisplayPort ones in particular, need to be
persistent across and suspend/resume cycle, and such a cycle would call
drm_mode_config_reset().
Thus, we need to add a new callback to allocate a pristine state for a
given private object.
This discussion has also came up during the atomic state readout
discussion, so it might be introduced into the other objects later on.
Until all drivers are converted to that new allocation pattern, we will
only call it if the passed state is NULL. This will be removed
eventually.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260128-drm-private-obj-reset-v4-2-90891fa3d3b0@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Since we're going to move the drm_private_obj state allocation to a
callback, we need to be able to deal with its possible failure.
Make drm_private_obj_init return an error code on failure.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260128-drm-private-obj-reset-v4-1-90891fa3d3b0@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Some drivers might want to embed struct drm_colorop inside
driver-specific objects, similar to planes or CRTCs. In such
cases, freeing only the drm_colorop is incorrect.
Add a drm_colorop_funcs callback to allow drivers to provide a destroy
hook that cleans up the full enclosing object. Make changes in helper
functions to accept helper functions as argument. Pass NULL for now
to retain current behavior.
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260202094202.2871478-3-chaitanya.kumar.borah@intel.com
Add a helper that performs common cleanup and frees the
associated object. This can be used by drivers if they do not
require any driver-specific teardown.
v2:
- Add function documentation only before definition (Jani)
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260202094202.2871478-2-chaitanya.kumar.borah@intel.com
Only DRM clients for fbdev emulation invoke fbdev helpers. Hence remove
the empty placeholders for non-fbdev builds, as they are unused.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/20260205141142.412048-1-tzimmermann@suse.de
Move the DRM buddy allocator one level up so that it can be used by GPU
drivers (example, nova-core) that have usecases other than DRM (such as
VFIO vGPU support). Modify the API, structures and Kconfigs to use
"gpu_buddy" terminology. Adapt the drivers and tests to use the new API.
The commit cannot be split due to bisectability, however no functional
change is intended. Verified by running K-UNIT tests and build tested
various configurations.
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
[airlied: I've split this into two so git can find copies easier.
I've also just nuked drm_random library, that stuff needs to be done
elsewhere and only the buddy tests seem to be using it].
Signed-off-by: Dave Airlie <airlied@redhat.com>
Move the DRM buddy allocator one level up so that it can be used by GPU
drivers (example, nova-core) that have usecases other than DRM (such as
VFIO vGPU support). Modify the API, structures and Kconfigs to use
"gpu_buddy" terminology. Adapt the drivers and tests to use the new API.
The commit cannot be split due to bisectability, however no functional
change is intended. Verified by running K-UNIT tests and build tested
various configurations.
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
[airlied: I've split this into two so git can find copies easier.
I've also just nuked drm_random library, that stuff needs to be done
elsewhere and only the buddy tests seem to be using it].
Signed-off-by: Dave Airlie <airlied@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAml2lQweHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG0dcH/2yLU3IKlHSSgEDL
Qq3oBuRK/zoVOdy+CM+TmTdl2d1LnBd8J547xFStB7kVGf5mEkdFZdHLBSHRnKDf
ia1SGec06kyLpRX6x5T6FsfwOhkBmVsp59X0coM57QWxxenybugtzPvDO2TQ8/G4
buixJI0jJVgwRwXNzWB4n2W6FxNGui2A7gEN2mjtvkM2t/aDkiDjEqB8ve0pZJX9
4EWhxOgRFzwWgkd/bY+4wgXVXEt3GtI+3VvNncRqLIO00A/AnZOYmH4S2RQUDszD
IbyDscYYxloZcZMDXc3PN2WgD9DCGKuP3GpJGsOHbl0DN6JkqI9nwGsOFZKGVOeF
vbajwPE=
=iAOa
-----END PGP SIGNATURE-----
BackMerge tag 'v6.19-rc7' into drm-next
Linux 6.19-rc7
This is needed for msm and rust trees.
Signed-off-by: Dave Airlie <airlied@redhat.com>
If the driver can make an assertion whether a connected panel is an OLED
panel or not then it can attach a property to the connector that userspace
can use as a hint for color schemes.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Link: https://patch.msgid.link/20260106170017.68158-2-superm1@kernel.org
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Call the parent driver pcode functions through the parent interface
function pointers instead of expecting both to have functions of the
same name.
In i915, add the interface to existing intel_pcode.[ch], while in xe
move them to new display/xe_display_pcode.[ch] and build it only for
CONFIG_DRM_XE_DISPLAY=y.
Do not add separate write and write_timeout calls in the
interface. Instead, handle the default 1 ms timeout in the
intel_parent.c glue layer.
This drops the last intel_pcode.h includes from display, and allows us
to remove the corresponding xe compat header.
v2: initialize .pcode in i915
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/20260126112925.2452171-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Move the DSB buffer handling to the display parent interface, making
display more independent of i915 and xe driver implementations.
Since the DSB parent interface is only called from intel_dsb.c, add the
wrappers there with smaller visibility instead of the usual
intel_parent.[ch], and using struct intel_dsb as the context parameter
for convenience.
Unfortunately, memset() being a macro in linux/fortify-string.h, we
can't use that as the function pointer name. dsb->memset() would be
using the macro and leading to build failures. Therefore, use .fill()
for the memset() functionality.
v2: s/memset/fill/
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/df117c862a6d34dae340e4a85c2482b4e29c8884.1768923917.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The actual GMCH_CRTL lives in the host bridge aka. device 0,
but device 2 has a read-only mirror on i85x/i865+. Document
that fact.
Also remove the ancient tales about where the defines are used.
Those haven't been true in a long time.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251208182637.334-20-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The PCI config space register defines in i915_drm.h are
a bit of a mess; Whitespace is all over the place, register
masks and values are defined in inconsistent ways.
Clean it up a bit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251208182637.334-19-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
CONFIG_DEVICE_PRIVATE is not selected by default by some distros,
for example Fedora, and that leads to a regression in the xe driver
since userptr support gets compiled out.
It turns out that DRM_GPUSVM, which is needed for xe userptr support
compiles also without CONFIG_DEVICE_PRIVATE, but doesn't compile
without CONFIG_ZONE_DEVICE.
Exclude the drm_pagemap files from compilation with !CONFIG_ZONE_DEVICE,
and remove the CONFIG_DEVICE_PRIVATE dependency from CONFIG_DRM_GPUSVM and
the xe driver's selection of it, re-enabling xe userptr for those configs.
v2:
- Don't compile the drm_pagemap files unless CONFIG_ZONE_DEVICE is set.
- Adjust the drm_pagemap.h header accordingly.
Fixes: 9e97874148 ("drm/xe/userptr: replace xe_hmm with gpusvm")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.18+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/20260121091048.41371-2-thomas.hellstrom@linux.intel.com
(cherry picked from commit 1e372b2461)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
CONFIG_DEVICE_PRIVATE is not selected by default by some distros,
for example Fedora, and that leads to a regression in the xe driver
since userptr support gets compiled out.
It turns out that DRM_GPUSVM, which is needed for xe userptr support
compiles also without CONFIG_DEVICE_PRIVATE, but doesn't compile
without CONFIG_ZONE_DEVICE.
Exclude the drm_pagemap files from compilation with !CONFIG_ZONE_DEVICE,
and remove the CONFIG_DEVICE_PRIVATE dependency from CONFIG_DRM_GPUSVM and
the xe driver's selection of it, re-enabling xe userptr for those configs.
v2:
- Don't compile the drm_pagemap files unless CONFIG_ZONE_DEVICE is set.
- Adjust the drm_pagemap.h header accordingly.
Fixes: 9e97874148 ("drm/xe/userptr: replace xe_hmm with gpusvm")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.18+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/20260121091048.41371-2-thomas.hellstrom@linux.intel.com
