The blitter engines' MEM_COPY and MEM_SET instructions were added as
part of the same hardware change that introduced service copy engines
(i.e., BCS1-BCS8) which is why the driver checks for service copy engine
presence when deciding whether to use these instructions or the older
XY_* instructions. However when making this decision the driver should
consider which engines are part of the hardware architecture, not which
engines are present/usable on the current device. For graphics IP
versions that architecturally include service copy engines (i.e.,
everything Xe2 and later, plus PVC's Xe_HPC) we should use MEM_SET and
MEM_COPY even in if all of the service copy engines wind up getting
fused off. I.e., we need to decide based on whether the platform's
graphics descriptor contains these engines, rather than whether the
usable engine mask contains them. This logic got broken when
gt->info.__engine_mask was removed, although in practice that mistake
has been harmless so far because there haven't been any hardware
SKUs that fuse off all of the service copy engines yet.
Replace the incorrect has_service_copy_support() function with a GT
feature flag that tracks more accurately whether the new blitter
instructions are usable. In addition to fixing incorrect logic if all
service copies are fused off, the flag also makes it more obvious what
the calling code is trying to do; previously it wasn't terribly obvious
why "has service copy engines" was being used as the condition for using
different instructions on all copy engine types.
The new feature flag is named 'has_xe2_blt_instructions' because we
expect this flag to be set for all Xe2 and later platforms (i.e.,
everything officially supported by the Xe driver). Technically there's
also one Xe1-era platform (PVC) that supports these engines/instructions
and will set this flag, but this still seems to be the most clear and
understandable name for the flag.
Fixes: 61549a2ee5 ("drm/xe: Drop __engine_mask")
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patch.msgid.link/20260507-xe2_copy-v1-1-26506381b821@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 09b399842907565a64e351fb22da790b4c673ffb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Even though commit 8fcb7dfb8b ("drm/xe/xe3p_lpg: Add support for
graphics IP 35.10") mentions that the support for Indirect Ring State
exists for Xe3p_LPG, it missed actually setting the feature flag in
graphics_xe3p_lpg. Fix that by adding the missing member.
Fixes: 8fcb7dfb8b ("drm/xe/xe3p_lpg: Add support for graphics IP 35.10")
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260401-xe3p_lpg-indirect-ring-state-v1-1-0e4b5edf6898@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
(cherry picked from commit ec4f4970eb744fd7d6d135f40f5c83bd05982e72)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There will be a NVL-P workaround for which we will need to know the
platform-level stepping information in order to decide whether to apply
it or not.
While NVL-P has a nice mapping between the PCI revid and our symbolic
stepping enumeration, not all platforms are like that: (i) Some
platforms will have a single PCI revid used for a set platform level
steppings (ii) and some might even require specific mappings.
To make things simpler, let's include stepping information in the device
info only on demand, for those platforms where it is needed for
workaround checks.
v2:
- Call xe_step_platform_get() very early, to allow device workarounds
to use it in early stages of device initialization. (Matt)
Bspec: 74201
Reviewed-by: Matt Roper <matthew.d.roper@intel.com> # v1
Link: https://patch.msgid.link/20260309-extra-nvl-p-enabling-patches-v5-3-be9c902ee34e@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
In an upcoming change, we will add a member to struct xe_step_info to
represent the platform-level stepping. As such, we should stop assigning
the value returned by functions xe_step_pre_gmdid_get() and
xe_step_gmdid_get() directly to xe->info.step.
Since there are no other users for those functions, let's simply update
them to modify xe->info.step directly.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260309-extra-nvl-p-enabling-patches-v5-1-be9c902ee34e@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Add a has_access_counter feature flag to the graphics IP descriptor
and skip writing parameters for the access counter queue in
guc_um_init_params(), leaving queue_params[2] zero-initialized
to signal unavailability to the GuC.
The queue_params[] array layout is fixed by firmware ABI, so we
maintain the structure with queues 0 and 1 (page fault request/response)
always configured, and queue 2 conditionally skipped based on the
has_access_counter flag.
Bspec: 59323
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Varun Gupta <varun.gupta1@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260225164748.2302380-1-varun.gupta@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Tighten uapi validation to restrict multi-lrc support to VIDEO_DECODE and
VIDEO_ENHANCE engines only. This check should have been in place from the
start, as the driver typically avoids allowing uapi cases that we have
no userspace consumer for.
Additionally, the GuC firmware on ModSched platforms no longer supports
multi-lrc on non-media engines.
V4:
- use a unified mask for all platforms since engine instance count
is an independent runtime check (Matt Roper, Matthew Brost)
V3:
- store a multi-lrc enable class mask in xe->info and populate from
xe_device_desc in xe_pci.c (Matthew Brost)
V2:
- correct the typo (Shuicheng)
- move the check earlier to avoid VM lookup (Shuicheng, Matt Roper)
- remove the graphics version check (Matt Roper)
- input more details in the commit info (Matt Roper)
Cc: Shuicheng Lin <shuicheng.lin@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Xin Wang <x.wang@intel.com>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260225022014.45394-1-x.wang@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
When the media GT is not allowed, a VF must not attempt to read
the media version from the GuC. The GuC may not be loaded, and
any attempt to communicate with it would result in a timeout
and a VF probe failure:
(...)
[ 1912.406046] xe 0000:01:00.1: [drm] *ERROR* Tile0: GT1: GuC mmio request 0x5507: no reply 0x5507
[ 1912.407277] xe 0000:01:00.1: [drm] *ERROR* Tile0: GT1: [GUC COMMUNICATION] MMIO send failed (-ETIMEDOUT)
[ 1912.408689] xe 0000:01:00.1: [drm] *ERROR* VF: Tile0: GT1: Failed to reset GuC state (-ETIMEDOUT)
[ 1912.413986] xe 0000:01:00.1: probe with driver xe failed with error -110
Let's skip reading the media version for VFs when the media GT is not
allowed.
v2: move the condition directly to the VF path
Fixes: 7abd69278b ("drm/xe/configfs: Add attribute to disable GT types")
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://patch.msgid.link/20260202115041.2863357-1-piotr.piorkowski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Add Xe3p_LPG graphics IP version 35.10. Xe3p_LPG supports all features
described by XE2_GFX_FEATURES and also multi-queue feature on BCS and
CCS engines. As such, create a new struct xe_graphics_desc named
graphics_xe3p_lpg that inherits from XE2_GFX_FEATURES and also includes
the necessary .multi_queue_engine_class_mask.
Here is a list of fields and associated Bspec references for the members
of the IP descriptor:
.hw_engine_mask (Bspec 60149)
.multi_queue_engine_class_mask (Bspec 74110)
.has_asid (Bspec 71132)
.has_atomic_enable_pte_bit (Bspec 59510, 74675)
.has_indirect_ring_state (Bspec 67296)
.has_range_tlb_inval (Bspec 71126)
.has_usm (Bspec 59651)
.has_64bit_timestamp (Bspec 60318)
.num_geometry_xecore_fuse_regs (Bspec 62566, 67401, 67536)
.num_compute_xecore_fuse_regs (Bspec 62565, 62561, 67537)
v2:
- Drop non-existing fields from the list in the commit message. (Matt)
- Squash patch adding .multi_queue_engine_class_mask here. (Matt)
- Rename graphics_xe3p to graphics_xe3p_lpg. (Matt)
- Add fields .num_geometry_xecore_fuse_regs and
.num_compute_xecore_fuse_regs after rebasing and inheriting
commit 6acf3d3ed6 ("drm/xe: Move number of XeCore fuse registers to
graphics descriptor"). (Gustavo)
Signed-off-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260206-nvl-p-upstreaming-v3-1-636e1ad32688@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
On Xe3p_XPC, there are now four registers reserved to express the XeCore
mask rather than just three. Define the new registers and update the IP
descriptor accordingly.
Note that this only applies to Xe3p_XPC for now; Xe3p_LPG still only
uses three registers to express the mask.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20260205214139.48515-4-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
The number of registers used to express the XeCore mask has some
"special cases" that don't always get inherited by later IP versions so
it's cleaner and simpler to record the numbers in the IP descriptor
rather than adding extra conditions to the standalone get_num_dss_regs()
function.
Note that a minor change here is that we now always treat the number of
registers as 0 for the media GT. Technically a copy of these fuse
registers does exist in the media GT as well (at the usual
0x380000+$offset location), but the value of those is always supposed to
read back as 0 because media GTs never have any XeCores or EUs.
v2:
- Add a kunit assertion to catch descriptors that forget to initialize
either count. (Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20260205214139.48515-3-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Drop .has_mem_copy_instr from the platform descriptors and set it
in xe_info_init() after handle_gmdid() populates graphics_verx100.
Centralizing the GRAPHICS_VER(xe) >= 20 check keeps MEM_COPY enabled
on Xe2+ and removes redundant per-platform plumbing.
Bspec: 57561
Fixes: 1e12dbae9d ("drm/xe/migrate: support MEM_COPY instruction")
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Link: https://patch.msgid.link/20260120054724.1982608-2-nitin.r.gote@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Add has_ctx_tlb_inval to device info indicating a device has context
basd TLB invalidation.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Tested-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20260116221731.868657-4-matthew.brost@intel.com
clangd reports many "unused header" warnings throughout the Xe driver.
Start working to clean this up by removing unnecessary includes in our
.c files and/or replacing them with explicit includes of other headers
that were previously being included indirectly.
By far the most common offender here was unnecessary inclusion of
xe_gt.h. That likely originates from the early days of xe.ko when
xe_mmio did not exist and all register accesses, including those
unrelated to GTs, were done with GT functions.
There's still a lot of additional #include cleanup that can be done in
the headers themselves; that will come as a followup series.
v2:
- Squash the 79-patch series down to a single patch. (MattB)
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260115032803.4067824-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Read temperature limits using pcode mailbox and expose shutdown
temperature limit as tempX_emergency, critical temperature limit as
tempX_crit and GPU max temperature limit as temp2_max.
Update Xe hwmon documentation with above entries.
v2:
- Resolve a documentation warning.
- Address below review comments from Raag.
- Update date and kernel version in Xe hwmon documentation.
- Remove explicit disable of has_mbx_thermal_info for unsupported
platforms.
- Remove unnecessary default case in switches.
- Remove obvious comments.
- Use TEMP_LIMIT_MAX to compute number of dwords needed in
xe_hwmon_thermal_info.
- Remove THERMAL_LIMITS_DWORDS macro.
- Use has_mbx_thermal_info for checking thermal mailbox support.
v3:
- Address below minor comments. (Raag)
- Group new temperature attributes with existing temperature attributes
as per channel index in Xe hwmon documentation.
- Rename enums of xe_temp_limit to improve clarity.
- Use DIV_ROUND_UP to calculate dwords needed for temperature limits.
- Use return instead of breaks in xe_hwmon_temp_read.
- Minor aesthetic refinements.
v4:
- Remove a redundant break. (Raag)
- Update drm_dbg to drm_warn to inform user of unavailability for
thermal mailbox on expected platforms.
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20260112203521.1014388-2-karthik.poosa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Now that the GSC FW is defined, we can enable PXP for PTL. The feature
will only be turned on if the binary is found on disk.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260108011340.2562349-8-daniele.ceraolospurio@intel.com
Now that xe_pci.c calls the rebar directly, it doesn't make sense to
keep it in xe_vram.c since it's closer to the PCI initialization than to
the VRAM. Move it to its own file.
While at it, add a better comment to document the possible values for
the vram_bar_size module parameter.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251219211650.1908961-5-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Since different drivers can use SoC remapper, modify VSEC code to
access SoC remapper via a helper that would synchronize such accesses.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patch.msgid.link/20251223183943.3175941-7-umesh.nerlige.ramappa@intel.com
Backmerging to bring in 6.19-rc1. An important upstream bugfix and
to help unblock PTL CI.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Mark CRI as one that have the CSC NVM device.
Update the writable override flow to take the information from
the scratch register for CRI.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251216111034.3093507-1-alexander.usyskin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
LNL has been out long enough that all of our internal usage of
pre-production hardware has been phased out and we no longer need to
maintain workarounds that were exclusive to pre-production parts.
Production LNL hardware always has B0 or later steppings for both
graphics and media IP. Eliminate all workarounds that were exclusive to
A-step hardware and set the 'has_prod_wa_only' device flag for LNL to
make sure we warn and taint if someone tries to load the driver on an
old pre-production part.
Bspec: 70821
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patch.msgid.link/20251212181411.294854-4-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
When we're initially enabling driver support for a new platform/IP, we
usually implement all workarounds documented in the WA database in the
driver. Many of those workarounds are restricted to early steppings
that only showed up in pre-production hardware (i.e., internal test
chips that are not available to the general public). Since the
workarounds for early, pre-production steppings tend to be some of the
ugliest and most complicated workarounds, we generally want to eliminate
them and simplify the code once the platform has launched and our
internal usage of those pre-production parts have been phased out.
Let's add a flag to the device info that tracks which platforms still
have support for pre-production workarounds for so that we can print a
warning and taint if someone tries to load the driver on a
pre-production part for a platform without pre-production workarounds.
This will help our internal users understand the likely problems they'll
encounter if they try to load the driver on an old pre-production
device.
The Xe behavior here is similar to what we've done for many years on
i915 (see intel_detect_preproduction_hw()), except that instead of
manually coding up ranges of device steppings that we believe to be
pre-production hardware, Xe will use the hardware's own production vs
pre-production fusing status, which we can read from the FUSE2 register.
This fuse didn't exist on older Intel hardware, but should be present on
all platforms supported by the Xe driver.
Going forward, let's set the expectation that we'll start looking into
removing pre-production workarounds for a platform around the time that
platforms of the next major IP stepping are having their force_probe
requirement lifted. This timing is just a rough guideline; there may be
cases where some instances of pre-production parts are still being
actively used in CI farms, internal device pools, etc. and we'll need to
wait a bit longer for those to be swapped out.
v2:
- Fix inverted forcewake check
v3:
- Invert flag and add it to the platforms on which we still have
pre-prod workarounds. (Jani, Lucas)
v4:
- Avoid checking pre-production on VF since they don't have access to
the FUSE2 register.
Bspec: 78271, 52544
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251212181411.294854-3-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Starting from Xe3p, HW adds a feature assisting range based page
reclamation. Introduce a bit in device info to indicate whether
device has such capability.
Signed-off-by: Oak Zeng <oak.zeng@intel.com>
Signed-off-by: Brian Nguyen <brian3.nguyen@intel.com>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251212213225.3564537-15-brian3.nguyen@intel.com
Enable I2C controller for Crescent Island and while at it, rely on
has_i2c flag instead of manual platform checks.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251128084414.306265-1-raag.jadav@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Add multi_queue_enable_mask field to the gt information structure
which is bitmask of all engine classes with multi queue support
enabled.
v2: Rename multi_queue_enable_mask to multi_queue_engine_class_mask
(Matt Brost)
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-20-niranjana.vishwanathapura@intel.com
The xe3p_xpc platform supports Indirect Ring State and
it is required for the upcoming multi-queue feature.
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251204063451.1180387-2-niranjana.vishwanathapura@intel.com
vfio:
- add a vfio_pci variant driver for Intel
xe/i915 display:
- add plane color management support
xe:
- Add scope-based cleanup helper for runtime PM
- vfio xe driver prerequisites and exports
- fix vfio link error
- Fix a memory leak
- Fix a 64-bit division
- vf migration fix
- LRC pause fix
-----BEGIN PGP SIGNATURE-----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=jyth
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-12-05' of https://gitlab.freedesktop.org/drm/kernel
Pull more drm updates from Dave Airlie:
"There was some additional intel code for color operations we wanted to
land. However I discovered I missed a pull for the xe vfio driver
which I had sorted into 6.20 in my brain, until Thomas mentioned it.
This contains the xe vfio code, a bunch of xe fixes that were waiting
and the i915 color management support. I'd like to include it as part
of keeping the two main vendors on the same page and giving a good
cross-driver experience for userspace when it starts using it.
vfio:
- add a vfio_pci variant driver for Intel
xe/i915 display:
- add plane color management support
xe:
- Add scope-based cleanup helper for runtime PM
- vfio xe driver prerequisites and exports
- fix vfio link error
- Fix a memory leak
- Fix a 64-bit division
- vf migration fix
- LRC pause fix"
* tag 'drm-next-2025-12-05' of https://gitlab.freedesktop.org/drm/kernel: (25 commits)
drm/i915/color: Enable Plane Color Pipelines
drm/i915/color: Add 3D LUT to color pipeline
drm/i915/color: Add registers for 3D LUT
drm/i915/color: Program Plane Post CSC Registers
drm/i915/color: Program Pre-CSC registers
drm/i915/color: Add framework to program PRE/POST CSC LUT
drm/i915: Add register definitions for Plane Post CSC
drm/i915: Add register definitions for Plane Degamma
drm/i915/color: Add plane CTM callback for D12 and beyond
drm/i915/color: Preserve sign bit when int_bits is Zero
drm/i915/color: Add framework to program CSC
drm/i915/color: Create a transfer function color pipeline
drm/i915/color: Add helper to create intel colorop
drm/i915: Add intel_color_op
drm/i915/display: Add identifiers for driver specific blocks
drm/xe/pf: fix VFIO link error
drm/xe: Protect against unset LRC when pausing submissions
drm/xe/vf: Start re-emission from first unsignaled job during VF migration
drm/xe/pf: Use div_u64 when calculating GGTT profile
drm/xe: Fix memory leak when handling pagefault vma
...
new driver:
- Arm Ethos-U65/U85 accel driver
core:
- support the drm color pipeline in vkms/amdgfx
- add support for drm colorop pipeline
- add COLOR PIPELINE plane property
- add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE
- throttle dirty worker with vblank
- use drm_for_each_bridge_in_chain_scoped in drm's bridge code
- Ensure drm_client_modeset tests are enabled in UML
- add simulated vblank interrupt - use in drivers
- dumb buffer sizing helper
- move freeing of drm client memory to driver
- crtc sharpness strength property
- stop using system_wq in scheduler/drivers
- support emergency restore in drm-client
rust:
- make slice::as_flattened usable on all supported rustc
- add FromBytes::from_bytes_prefix() method
- remove redundant device ptr from Rust GEM object
- Change how AlwaysRefCounted is implemented for GEM objects
gpuvm:
- Add deferred vm_bo cleanup to GPUVM (for rust)
atomic:
- cleanup and improve state handling interfaces
buddy:
- optimize block management
dma-buf:
- heaps: Create heap per CMA reserved location
- improve userspace documentation
dp:
- add POST_LT_ADJ_REQ training sequence
- DPCD dSC quirk for synaptics panamera devices
- helpers to query branch DSC max throughput
ttm:
- Rename ttm_bo_put to ttm_bo_fini
- allow page protection flags on risc-v
- rework pipelined eviction fence handling
amdgpu:
- enable amdgpu by default for SI/CI dGPUs
- enable DC by default on SI
- refactor CIK/SI enablement
- add ABM KMS property
- Re-enable DM idle optimizations
- DC Analog encoders support
- Powerplay fixes for fiji/iceland
- Enable DC on bonaire by default
- HMM cleanup
- Add new RAS framework
- DML2.1 updates
- YCbCr420 fixes
- DC FP fixes
- DMUB fixes
- LTTPR fixes
- DTBCLK fixes
- DMU cursor offload handling
- Userq validation improvements
- Unify shutdown callback handling
- Suspend improvements
- Power limit code cleanup
- SR-IOV fixes
- AUX backlight fixes
- DCN 3.5 fixes
- HDMI compliance fixes
- DCN 4.0.1 cursor updates
- DCN interrupt fix
- DC KMS full update improvements
- Add additional HDCP traces
- DCN 3.2 fixes
- DP MST fixes
- Add support for new SR-IOV mailbox interface
- UQ reset support
- HDP flush rework
- VCE1 support
amdkfd:
- HMM cleanups
- Relax checks on save area overallocations
- Fix GPU mappings after prefetch
radeon:
- refactor CIK/SI enablement.
xe:
- Initial Xe3P support
- panic support on VRAM for display
- fix stolen size check
- Loosen used tracking restriction
- New SR-IOV debugfs structure and debugfs updates
- Hide the GPU madvise flag behind a VM_BIND flag
- Always expose VRAM provisioning data on discrete GPUs
- Allow VRAM mappings for userptr when used with SVM
- Allow pinning of p2p dma-buf
- Use per-tile debugfs where appropriate
- Add documentation for Execution Queues
- PF improvements
- VF migration recovery redesign work
- User / Kernel VRAM partitioning
- Update Tile-based messages
- Allow configfs to disable specific GT types
- VF provisioning and migration improvements
- use SVM range helpers in PT layer
- Initial CRI support
- access VF registers using dedicated MMIO view
- limit number of jobs per exec queue
- add sriov_admin sysfs tree
- more crescent island specific support
- debugfs residency counter
- SRIOV migration work
- runtime registers for GFX 35
i915:
- add initial Xe3p_LPD display version 35 support
- Enable LNL+ content adaptive sharpness filter
- Use optimized VRR guardband
- Enable Xe3p LT PHY
- enable FBC support for Xe3p_LPD display
- add display 30.02 firmware support
- refactor SKL+ watermark latency setup
- refactor fbdev handling
- call i915/xe runtime PM via function pointers
- refactor i915/xe stolen memory/display interfaces
- use display version instead of gfx version in display code
- extend i915_display_info with Type-C port details
- lots of display cleanups/refactorings
- set O_LARGEFILE in __create_shmem
- skuip guc communication warning on reset
- fix time conversions
- defeature DRRS on LNL+
- refactor intel_frontbuffer split between i915/xe/display
- convert inteL_rom interfaces to struct drm_device
- unify display register polling interfaces
- aovid lock inversion when pinning to GGTT on CHV/BXT+VTD
panel:
- Add KD116N3730A08/A12, chromebook mt8189
- JT101TM023, LQ079L1SX01,
- GLD070WX3-SL01 MIPI DSI
- Samsung LTL106AL0, Samsung LTL106AL01
- Raystar RFF500F-AWH-DNN
- Winstar WF70A8SYJHLNGA,
- Wanchanglong w552946aaa
- Samsung SOFEF00
- Lenovo X13s panel.
- ilitek-ili9881c : add rpi 5" support
- visionx-rm69299 - add backlight support
- edp - support AUI B116XAN02.0
bridge:
- improve ref counting
- ti-sn65dsi86 - add support for DP mode with HPD
- synopsis: support CEC, init timer with correct freq
- ASL CS5263 DP-to-HDMI bridge support
nova-core:
- introduce bitfield! macro
- introduce safe integer converters
- GSP inits to fully booted state on Ampere
- Use more future-proof register for GPU identification
nova-drm:
- select NOVA_CORE
- 64-bit only
nouveau:
- improve reclocking on tegra 186+
- add large page and compression support
msm:
- GPU:
- Gen8 support: A840 (Kaanapali) and X2-85 (Glymur)
- A612 support
- MDSS:
- Added support for Glymur and QCS8300 platforms
- DPU:
- Enabled Quad-Pipe support, unlocking higher resolutions support
- Added support for Glymur platform
- Documented DPU on QCS8300 platform as supported
- DisplayPort:
- Added support for Glymur platform
- Added support lame remapping inside DP block
- Documented DisplayPort controller on QCS8300 and SM6150/QCS615 as
supported
tegra:
- NVJPG driver
panfrost:
- display JM contexts over debugfs
- export JM contexts to userspace
- improve error and job handling
panthor:
- support custom ASN_HASH for mt8196
- support mali-G1 GPU
- flush shmem write before mapping buffers uncached
- make timeout per-queue instead of per-job
mediatek:
- MT8195/88 HDMIv2/DDCv2 support
rockchip:
- dsi: add support for RK3368
amdxdna:
- enhance runtime PM
- last hardware error reading uapi
- support firmware debug output
- add resource and telemetry data uapi
- preemption support
imx:
- add driver for HDMI TX Parallel audio interface
ivpu:
- add support for user-managed preemption buffer
- add userptr support
- update JSM firware API to 3.33.0
- add better alloc/free warnings
- fix page fault in unbind all bos
- rework bind/unbind of imported buffers
- enable MCA ECC signalling
- split fw runtime and global memory buffers
- add fdinfo memory statistics
tidss:
- convert to drm logging
- logging cleanup
ast:
- refactor generation init paths
- add per chip generation detect_tx_chip
- set quirks for each chip model
atmel-hlcdc:
- set LCDC_ATTRE register in plane disable
- set correct values for plane scaler
solomon:
- use drm helper for get_modes and move_valid
sitronix:
- fix output position when clearing screens
qaic:
- support dma-buf exports
- support new firmware's READ_DATA implementation
- sahara AIC200 image table update
- add sysfs support
- add coredump support
- add uevents support
- PM support
sun4i:
- layer refactors to decouple plane from output
- improve DE33 support
vc4:
- switch to generic CEC helpers
komeda:
- use drm_ logging functions
vkms:
- configfs support for display configuration
vgem:
- fix fence timer deadlock
etnaviv:
- add HWDB entry for GC8000 Nano Ultra VIP r6205
-----BEGIN PGP SIGNATURE-----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=gpnQ
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"There was a rather late merge of a new color pipeline feature, that
some userspace projects are blocked on, and has seen a lot of work in
amdgpu. This should have seen some time in -next. There is additional
support for this for Intel, that if it arrives in the next day or two
I'll pass it on in another pull request and you can decide if you want
to take it.
Highlights:
- Arm Ethos NPU accelerator driver
- new DRM color pipeline support
- amdgpu will now run discrete SI/CIK cards instead of radeon, which
enables vulkan support in userspace
- msm gets gen8 gpu support
- initial Xe3P support in xe
Full detail summary:
New driver:
- Arm Ethos-U65/U85 accel driver
Core:
- support the drm color pipeline in vkms/amdgfx
- add support for drm colorop pipeline
- add COLOR PIPELINE plane property
- add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE
- throttle dirty worker with vblank
- use drm_for_each_bridge_in_chain_scoped in drm's bridge code
- Ensure drm_client_modeset tests are enabled in UML
- add simulated vblank interrupt - use in drivers
- dumb buffer sizing helper
- move freeing of drm client memory to driver
- crtc sharpness strength property
- stop using system_wq in scheduler/drivers
- support emergency restore in drm-client
Rust:
- make slice::as_flattened usable on all supported rustc
- add FromBytes::from_bytes_prefix() method
- remove redundant device ptr from Rust GEM object
- Change how AlwaysRefCounted is implemented for GEM objects
gpuvm:
- Add deferred vm_bo cleanup to GPUVM (for rust)
atomic:
- cleanup and improve state handling interfaces
buddy:
- optimize block management
dma-buf:
- heaps: Create heap per CMA reserved location
- improve userspace documentation
dp:
- add POST_LT_ADJ_REQ training sequence
- DPCD dSC quirk for synaptics panamera devices
- helpers to query branch DSC max throughput
ttm:
- Rename ttm_bo_put to ttm_bo_fini
- allow page protection flags on risc-v
- rework pipelined eviction fence handling
amdgpu:
- enable amdgpu by default for SI/CI dGPUs
- enable DC by default on SI
- refactor CIK/SI enablement
- add ABM KMS property
- Re-enable DM idle optimizations
- DC Analog encoders support
- Powerplay fixes for fiji/iceland
- Enable DC on bonaire by default
- HMM cleanup
- Add new RAS framework
- DML2.1 updates
- YCbCr420 fixes
- DC FP fixes
- DMUB fixes
- LTTPR fixes
- DTBCLK fixes
- DMU cursor offload handling
- Userq validation improvements
- Unify shutdown callback handling
- Suspend improvements
- Power limit code cleanup
- SR-IOV fixes
- AUX backlight fixes
- DCN 3.5 fixes
- HDMI compliance fixes
- DCN 4.0.1 cursor updates
- DCN interrupt fix
- DC KMS full update improvements
- Add additional HDCP traces
- DCN 3.2 fixes
- DP MST fixes
- Add support for new SR-IOV mailbox interface
- UQ reset support
- HDP flush rework
- VCE1 support
amdkfd:
- HMM cleanups
- Relax checks on save area overallocations
- Fix GPU mappings after prefetch
radeon:
- refactor CIK/SI enablement
xe:
- Initial Xe3P support
- panic support on VRAM for display
- fix stolen size check
- Loosen used tracking restriction
- New SR-IOV debugfs structure and debugfs updates
- Hide the GPU madvise flag behind a VM_BIND flag
- Always expose VRAM provisioning data on discrete GPUs
- Allow VRAM mappings for userptr when used with SVM
- Allow pinning of p2p dma-buf
- Use per-tile debugfs where appropriate
- Add documentation for Execution Queues
- PF improvements
- VF migration recovery redesign work
- User / Kernel VRAM partitioning
- Update Tile-based messages
- Allow configfs to disable specific GT types
- VF provisioning and migration improvements
- use SVM range helpers in PT layer
- Initial CRI support
- access VF registers using dedicated MMIO view
- limit number of jobs per exec queue
- add sriov_admin sysfs tree
- more crescent island specific support
- debugfs residency counter
- SRIOV migration work
- runtime registers for GFX 35
i915:
- add initial Xe3p_LPD display version 35 support
- Enable LNL+ content adaptive sharpness filter
- Use optimized VRR guardband
- Enable Xe3p LT PHY
- enable FBC support for Xe3p_LPD display
- add display 30.02 firmware support
- refactor SKL+ watermark latency setup
- refactor fbdev handling
- call i915/xe runtime PM via function pointers
- refactor i915/xe stolen memory/display interfaces
- use display version instead of gfx version in display code
- extend i915_display_info with Type-C port details
- lots of display cleanups/refactorings
- set O_LARGEFILE in __create_shmem
- skuip guc communication warning on reset
- fix time conversions
- defeature DRRS on LNL+
- refactor intel_frontbuffer split between i915/xe/display
- convert inteL_rom interfaces to struct drm_device
- unify display register polling interfaces
- aovid lock inversion when pinning to GGTT on CHV/BXT+VTD
panel:
- Add KD116N3730A08/A12, chromebook mt8189
- JT101TM023, LQ079L1SX01,
- GLD070WX3-SL01 MIPI DSI
- Samsung LTL106AL0, Samsung LTL106AL01
- Raystar RFF500F-AWH-DNN
- Winstar WF70A8SYJHLNGA
- Wanchanglong w552946aaa
- Samsung SOFEF00
- Lenovo X13s panel
- ilitek-ili9881c - add rpi 5" support
- visionx-rm69299 - add backlight support
- edp - support AUI B116XAN02.0
bridge:
- improve ref counting
- ti-sn65dsi86 - add support for DP mode with HPD
- synopsis: support CEC, init timer with correct freq
- ASL CS5263 DP-to-HDMI bridge support
nova-core:
- introduce bitfield! macro
- introduce safe integer converters
- GSP inits to fully booted state on Ampere
- Use more future-proof register for GPU identification
nova-drm:
- select NOVA_CORE
- 64-bit only
nouveau:
- improve reclocking on tegra 186+
- add large page and compression support
msm:
- GPU:
- Gen8 support: A840 (Kaanapali) and X2-85 (Glymur)
- A612 support
- MDSS:
- Added support for Glymur and QCS8300 platforms
- DPU:
- Enabled Quad-Pipe support, unlocking higher resolutions support
- Added support for Glymur platform
- Documented DPU on QCS8300 platform as supported
- DisplayPort:
- Added support for Glymur platform
- Added support lame remapping inside DP block
- Documented DisplayPort controller on QCS8300 and SM6150/QCS615
as supported
tegra:
- NVJPG driver
panfrost:
- display JM contexts over debugfs
- export JM contexts to userspace
- improve error and job handling
panthor:
- support custom ASN_HASH for mt8196
- support mali-G1 GPU
- flush shmem write before mapping buffers uncached
- make timeout per-queue instead of per-job
mediatek:
- MT8195/88 HDMIv2/DDCv2 support
rockchip:
- dsi: add support for RK3368
amdxdna:
- enhance runtime PM
- last hardware error reading uapi
- support firmware debug output
- add resource and telemetry data uapi
- preemption support
imx:
- add driver for HDMI TX Parallel audio interface
ivpu:
- add support for user-managed preemption buffer
- add userptr support
- update JSM firware API to 3.33.0
- add better alloc/free warnings
- fix page fault in unbind all bos
- rework bind/unbind of imported buffers
- enable MCA ECC signalling
- split fw runtime and global memory buffers
- add fdinfo memory statistics
tidss:
- convert to drm logging
- logging cleanup
ast:
- refactor generation init paths
- add per chip generation detect_tx_chip
- set quirks for each chip model
atmel-hlcdc:
- set LCDC_ATTRE register in plane disable
- set correct values for plane scaler
solomon:
- use drm helper for get_modes and move_valid
sitronix:
- fix output position when clearing screens
qaic:
- support dma-buf exports
- support new firmware's READ_DATA implementation
- sahara AIC200 image table update
- add sysfs support
- add coredump support
- add uevents support
- PM support
sun4i:
- layer refactors to decouple plane from output
- improve DE33 support
vc4:
- switch to generic CEC helpers
komeda:
- use drm_ logging functions
vkms:
- configfs support for display configuration
vgem:
- fix fence timer deadlock
etnaviv:
- add HWDB entry for GC8000 Nano Ultra VIP r6205"
* tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel: (1869 commits)
Revert "drm/amd: Skip power ungate during suspend for VPE"
drm/amdgpu: use common defines for HUB faults
drm/amdgpu/gmc12: add amdgpu_vm_handle_fault() handling
drm/amdgpu/gmc11: add amdgpu_vm_handle_fault() handling
drm/amdgpu: use static ids for ACP platform devs
drm/amdgpu/sdma6: Update SDMA 6.0.3 FW version to include UMQ protected-fence fix
drm/amdgpu: Forward VMID reservation errors
drm/amdgpu/gmc8: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc7: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Cache VM fault info
drm/amdgpu/gmc6: Don't print MC client as it's unknown
drm/amdgpu/cz_ih: Enable soft IRQ handler ring
drm/amdgpu/tonga_ih: Enable soft IRQ handler ring
drm/amdgpu/iceland_ih: Enable soft IRQ handler ring
drm/amdgpu/cik_ih: Enable soft IRQ handler ring
drm/amdgpu/si_ih: Enable soft IRQ handler ring
drm/amd/display: fix typo in display_mode_core_structs.h
drm/amd/display: fix Smart Power OLED not working after S4
drm/amd/display: Move RGB-type check for audio sync to DCE HW sequence
...
Backmerging to bring in a needed dependency for the Xe VFIO
driver variant. This should ideally have been done before we
commited that, so we now have a small window in drm-xe-next
where that driver doesn't compile.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512030331.I8CveRre-lkp@intel.com/
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
In certain scenarios (such as VF migration), VF driver needs to interact
with PF driver.
Add a helper to allow VF driver access to PF xe_device.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251127093934.1462188-3-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
(cherry picked from commit 8b3cce3ad9)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
In certain scenarios (such as VF migration), VF driver needs to interact
with PF driver.
Add a helper to allow VF driver access to PF xe_device.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251127093934.1462188-3-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
We hold an additional reference to the runtime PM to keep PF in D0
during VFs lifetime, as our VFs do not implement the PM capability.
This means we should never be runtime suspending as long as VFs are
enabled.
v8: Add !IS_SRIOV_VF() assert (Matthew Brost)
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251030122357.128825-4-raag.jadav@intel.com
Introduce device xe_caching_pt flag to selectively turn it on for
supported platforms. It allows to eliminate version check and enable
this feature for the future platforms.
Signed-off-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20251125153732.400766-2-zbigniew.kempczynski@intel.com
The MERT subsystem manages memory accesses between host and device. On
the Crescent Island platform, it requires direct management by the
driver.
Introduce a device flag and corresponding helpers to identify platforms
with standalone MERT, enabling proper initialization and handling.
Signed-off-by: Lukasz Laguna <lukasz.laguna@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251124190237.20503-2-lukasz.laguna@intel.com
To form the WCL platform as a subplatform of PTL in definition,
WCL pci ids are splited into saparate group from PTL.
So update the pciidlist struct to cover all the pci ids.
v2:
- Squash wcl description in single patch for display and xe.(jani,gustavo)
Fixes: 3c0f211bc8 ("drm/xe: Add Wildcat Lake device IDs to PTL list")
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250922150317.2334680-2-dnyaneshwar.bhadane@intel.com
(cherry picked from commit 32620e1764)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo added the Fixes tag when porting it to fixes]
Limit number of jobs per exec queue (Shuicheng)
Add sriov_admin sysfs tree (Michal)
Driver Changes:
Fix an uninitialized value (Thomas)
Expose a residency counter through debugfs (Mohammed Thasleem)
Workaround enabling and improvement (Tapani, Tangudu)
More Crescent Island-specific support (Sk Anirban, Lucas)
PAT entry dump improvement (Xin)
Inline gt_reset in the worker (Lucas)
Synchronize GT reset with device unbind (Balasubramani)
Do clean shutdown also when using flr (Jouni)
Fix serialization on burst of unbinds (Matt Brost)
Pagefault Refactor (Matt Brost)
Remove some unused code (Gwan-gyeong)
Avoid TOCTOU when montoring throttle reasons (Lucas)
Add/extend workaround (Nitin)
SRIOV migration work / plumbing (Michal Wajdeczko, Michal Winiarski, Lukasz)
Drop debug flag requirement for VF resource fixup
Fix MTL vm_max_level (Rodrigo)
Changes around TILE_ADDR_RANGE for platform compatibility
(Fei, Lucas)
Add runtime registers for GFX ver >= 35 (Piotr)
Kerneldoc fix (Kriish)
Rework pcode error mapping (Lucas)
Allow lockdown the PF (Michal)
Eliminate GUC code caching of some frequency values (Sk)
Improvements around forcewake referencing (Matt Roper)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCaRcIGwAKCRC4FpNVCsYG
v3VWAQD7eVdaBKgOUoyWexzeWiHeAEAe9QwgTdK71PBNHF1kIQEA3dg12QDETxFp
pWvOYie6bl+ApXx/JJ0OKtMeIFz2mQc=
=MS1G
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2025-11-14' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
Avoid TOCTOU when montoring throttle reasons (Lucas)
Add/extend workaround (Nitin)
SRIOV migration work / plumbing (Michal Wajdeczko, Michal Winiarski, Lukasz)
Drop debug flag requirement for VF resource fixup
Fix MTL vm_max_level (Rodrigo)
Changes around TILE_ADDR_RANGE for platform compatibility
(Fei, Lucas)
Add runtime registers for GFX ver >= 35 (Piotr)
Kerneldoc fix (Kriish)
Rework pcode error mapping (Lucas)
Allow lockdown the PF (Michal)
Eliminate GUC code caching of some frequency values (Sk)
Improvements around forcewake referencing (Matt Roper)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/aRcJOrisG2qPbucE@fedora
drm/i915 feature pull for v6.19:
Features and functionality:
- Enable LNL+ content adaptive sharpness filter (CASF) (Nemesa)
- Use optimized VRR guardband (Ankit, Ville)
- Enable Xe3p LT PHY (Suraj)
- Enable FBC support for Xe3p_LPD display (Sai Teja, Vinod)
- Specify DMC firmware for display version 30.02 (Dnyaneshwar)
- Report reason for disabling PSR to debugfs (Michał)
- Extend i915_display_info with Type-C port details (Khaled)
- Log DSI send packet sequence errors and contents
Refactoring and cleanups:
- Refactoring to prepare for VRR guardband optimization (Ankit)
- Abstract VRR live status wait (Ankit)
- Refactor VRR and DSB timing to handle Set Context Latency explicitly (Ankit)
- Helpers for prefill latency calculations (Ville)
- Refactor SKL+ watermark latency setup (Ville)
- VRR refactoring and cleanups (Ville)
- SKL+ universal plane cleanups (Ville)
- Decouple CDCLK from state->modeset refactor (Ville)
- Refactor VLV/CHV clock functions (Jani)
- Refactor fbdev handling (Jani)
- Call i915 and xe runtime PM from display via function pointers (Jouni)
- IRQ code refactoring (Jani)
- Drop display dependency on i915 feature check macros (Jani)
- Refactor and unify i915 and xe stolen memory interfaces towards display (Jani)
- Switch to driver agnostic drm to display pointer chase (Jani)
- Use display version over graphics version in display code (Matt A)
- GVT cleanups (Jonathan, Andi)
- Rename a VLV clock function to unify (Michał)
- Explicitly sanitize DMC package header num entries (Luca)
- Remove redundant port clock check from ALPM (Jouni)
- Use sysfs_emit() instead of sprintf() in PMU sysfs (Madhur Kumar)
- Clean up C20 PHY PLL register macros (Imre, Mika))
- Abstract "address in MMIO table" helper for general use (Matt A)
- Improve VRR platform abstractions (Ville)
- Move towards more standard PCI PM code usage (Ville)
- Framebuffer refactoring (Ville)
- Drop display dependency on i915_utils.h (Jani)
- Include cleanups (Jani)
Fixes:
- Workaround docking station DSC issues with high pixel clock and bpp (Imre)
- Fix Panel Replay in DSC mode (Imre)
- Disable tracepoints for PREEMPT_RT as a workaround (Maarten)
- Fix intel_crtc_get_vblank_counter() on PREEMPT_RT (Maarten)
- Fix C10 PHY identification on PTL/WCL (Dnyaneshwar)
- Take AS SDP into account with optimized guardband (Jouni)
- Fix panic structure allocation memory leak (Jani)
- Adjust an FBC workaround platforms (Vinod)
- Add fallback for CDCLK selection (Naladala)
- Avoid using invalid transcoder in MST transport select (Suraj)
- Don't use cursor size reduction on display version 14+ (Nemesa)
- Fix C20 PHY PLL register programming (Imre, Mika)
- Fix PSR frontbuffer flush handling (Jouni)
- Store ALPM parameters in crtc state (Jouni)
- Defeature DRRS on LNL+ (Ville)
- Fix the scope of the large DRAM DIMM workaround (Ville)
- Fix PICA vs. AUX power ordering issue (Gustavo)
- Fix pixel rate for computing watermark line time (Ville)
- Fix framebuffer set_tiling vs. addfb race (Ville)
- DMC event handler fixes (Ville)
DRM Core:
- CRTC sharpness strength property (Nemesa)
- DPCD DSC quirk for Synaptics Panamera devices (Imre)
- Helpers to query the branch DSC max throughput/line-width (Imre)
Merges:
- Backmerge drm-next for v6.18-rc and to sync with drm-xe-next (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/ec5a05f2df6d597a62033ee2d57225cce707b320@intel.com
Add platform definition and PCI IDs for Crescent Island.
Other platforms use INTEL_VGA_DEVICE since they have a
PCI_BASE_CLASS_DISPLAY class. This is not the case for CRI, so just
match on devid, which should be sufficient.
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Link: https://lore.kernel.org/r/20251021-cri-v1-1-bf11e61d9f49@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Make this the default on xe2+ when doing a copy. This has a few
advantages over the exiting copy instruction:
1) It has a special PAGE_COPY mode that claims to be optimised for
page-in/page-out, which is the vast majority of current users.
2) It also has a simple BYTE_COPY mode that supports byte granularity
copying without any restrictions.
With 2) we can now easily skip the bounce buffer flow when copying
buffers with strange sizing/alignment, like for memory_access. But that
is left for the next patch.
v2 (Matt Brost):
- Use device info to check whether device should use the MEM_COPY
path. This should fit better with making this a configfs tunable.
- And with that also keep old path still functional on xe2 for possible
experimentation.
- Add a define for PAGE_COPY page-size.
v3 (Matt Brost):
- Fallback to an actual linear copy for pitch=1.
- Also update NVL.
BSpec: 57561
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20251022163836.191405-7-matthew.auld@intel.com
Add support for graphics IP Xe3p_XPC having IP version 35.11.
Bspec: 77979, 77975
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Link: https://lore.kernel.org/r/20251016-xe3p-v3-14-3dd173a3097a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Provide the basic platform definitions and PCI IDs for NVL-S.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251016-xe3p-v3-11-3dd173a3097a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Xe3p_LPM/Xe3p_HPM are very similar to Xe3_LPM on the kmd interface, so it can use
the same descriptor structure. Add both 35.00 and 35.03 IP versions.
BSpec: 74201, 74202, 77977, 77979
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20251016-xe3p-v3-2-3dd173a3097a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add graphics IP versions 30.04 & 30.05 and initial workarounds for these
IP versions.
BSpec: 74201
Signed-off-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20251016-xe3p-v3-1-3dd173a3097a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
SR-IOV operation relies on the primary GT's GuC to operate (in both PF
and VF mode). Don't enable the .has_sriov flag if the primary-GT was
disabled by configfs.
v2:
- Move handling to xe_info_init(). (Michal)
v3:
- Just update the .has_sriov flag in xe_info_init_early(). (Michal)
v4:
- Drop unnecessary comment. (Michal)
- Flip condition order for consistency with other checks. (Michal)
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-48-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Preventing the driver from initializing GTs of specific type(s) can be
useful for debugging and early hardware bringup. Add a configfs
attribute to allow this kind of control for debugging.
With today's platforms and software design, this configuration setting
is only effective for disabling the media GT since the driver currently
requires that there always be a primary GT to probe the device. However
this might change in the future --- in theory it should be possible
(with some additional driver work) to allow an igpu device to come up
with only the media GT and no primary GT. Or to allow an igpu device to
come up with no GTs at all (for display-only usage). A primary GT will
likely always be required on dgpu platforms because we rely on the BCS
engines inside the primary GT for various vram operations.
v2:
- Expand/clarify kerneldoc for configfs attribute. (Gustavo)
- Tighten type usage in gt_types[] structure. (Gustavo)
- Adjust string parsing/name matching to match exact GT names and not
accept partial names. (Gustavo)
v3:
- Switch to scope-based cleanup in gt_types_allowed_store() to fix a
leak if the device is already bound. (Gustavo)
- Switch configfs lookup interface to two boolean functions that
specify whether primary/media are supported rather than one function
that returns a mask. This is simpler to use and understand.
v4:
- Rename xe_configfs_*_gt_supported to xe_configfs_*_gt_allowed for
consistency with configfs interface and other functions. (Gustavo)
- Simplify boolean check in xe_configfs_*_gt_allowed. (Michal)
- Use xe_info() for message printing. (Michal)
- Use guard() instead of scoped_guard(). (Michal)
- Make new functions take 'struct pci_dev' for consistency with other
configfs lookup functions. (Michal)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-47-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
xe_info_init() is getting a bit long and hard to follow. Break the
allocation and basic initialization of the xe_gt structures out to their
own functions.
v2:
- Rename new functions from init_* to alloc_*. (Gustavo)
- Move early NULL return of media GT before allocation. (Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-46-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
When Wa_22010954014 and Wa_14022085890 were first implemented, we didn't
have a device workaround infrastructure so we hacked them into the GT
workaround list. Now that we have proper device workaround support,
move them to the proper place. Note that Wa_14022085890 specifically
applies to BMG-G21 platforms, so this requires defining a BMG
subplatform to capture the correct subset of device IDs.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-40-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
