Remove LT PHY specific state verification as DPLL framework
has state verification check.
v2: Reuse intel_lt_phy_pll_compare_hw_state() as only config[0]
and config[0] parameters are reliable with LT PHY (Suraj)
v3: Rephrase handling of LT PHY case when verifying the state (CI)
v4: Fix checkpatch warning of line length exceeding 100 columns
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-23-mika.kahola@intel.com
Add the PLL hooks for the TBT PLL on xe3plpd. These are simple stubs
similar to the TBT PLL on earlier platforms, since this PLL is always
on from the display POV - so no PLL enable/disable programming is
required as opposed to the non-TBT PLLs - and the clocks for different
link rates are enabled/disabled at a different level, via the
intel_encoder::enable_clock()/disable_clock() interface.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-22-mika.kahola@intel.com
Enable PLL clock on DDI by moving part of the PLL enabling
sequence into a DDI clock enabling function.
v2: Reuse intel_mtl_pll_enable_clock for DDI clock enabling
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-17-mika.kahola@intel.com
Add .get_hw_state hook to xe3plpd platform for dpll framework
and update intel_lt_phy_pll_readout_hw_state() function
accordingly to support dpll framework.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-14-mika.kahola@intel.com
Add .dump_hw_state function pointer for xe3plpd platform
to support dpll framework. While at it, switch to use
drm_printer structure to print hw state information.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-12-mika.kahola@intel.com
Add verification for lt phy pll dividers during boot. The port clock
is calculated from pll dividers and compared against the requested
port clock value. If there are a difference exceeding +-1 kHz an
drm_warn() is thrown out to indicate possible pll divider mismatch.
v2:
- Move the LT_PHY_PLL_PARAMS -> LT_PHY_PLL_DP/HDMI_PARAMS change
earlier.
- Use tables[i].name != NULL as a terminating condition.
- Use state vs. params term consistently in intel_c10pll_verify_clock()
and intel_c20pll_verify_clock().
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260119093757.2850233-13-mika.kahola@intel.com
Drop crtc_state from intel_lt_phy_calc_port_clock() function call
and replace it with pll state instead. Follow-up changes will
call these functions without a crtc_state available.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260119093757.2850233-5-mika.kahola@intel.com
We will need to HAS_LT_PHY() that macro in code outside of LT PHY
implementation. Move its definition to intel_display_device.h.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251202012306.9315-8-matthew.s.atwood@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
NVL uses the Lake Tahoe PHY for display output and the driver recently
added the macro HAS_LT_PHY() to allow selecting code paths specific for
that type of PHY.
While NVL uses Xe3p_LPD as display IP, the type of PHY is actually
defined at the SoC level, so use a platform check instead of display
version.
Bspec: 74199
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251202012306.9315-7-matthew.s.atwood@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Implement the HDMI Algorithm to dynamically create LT PHY state
based on the port clock provided.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20251110061940.545183-1-suraj.kandpal@intel.com
Program LT Phy voltage swing using the Swing tables and plug in the
function at encoder->set_signal_level
Bspec: 74493
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-20-suraj.kandpal@intel.com
Hook up the LT Phy enable and disable sequences using encoder->
enable/disable_clock and reusing the TBT enable disable sequence from
cx0 PHY since it remains the same.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-18-suraj.kandpal@intel.com
Program in the steps for Non TBT PLL disable sequence.
The whole function can be defined in one shot since most of
prequiste functions are already coded in.
Bspec: 74492
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-17-suraj.kandpal@intel.com
Create a reverse algorithm which is used to find port clock
from the LT PHY state is provided which is used for
comparision & verification functions.
Bspec: 74667
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-13-suraj.kandpal@intel.com
Add the LT Phy programming recipe tables for eDP, DP & HDMI and a
function to use the correct table.
Bspec: 74667
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-9-suraj.kandpal@intel.com
Define function to bring phy lane out of reset for LT Phy and the
corresponding pre-requisite steps before we follow the steps for
Phy lane reset. Also create a skeleton of LT PHY PLL enable sequence
function in which we can place this function
Bspec: 77449, 74749, 74499, 74495, 68960
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-4-suraj.kandpal@intel.com
