decide_crtc_timing_for_drm_display_mode() copies the native mode's CRTC
timing into the requested mode when clock, htotal and vtotal match.
That is meant for the modes amdgpu inserts itself:
amdgpu_dm_create_common_mode() duplicates the native mode and changes
only hdisplay and vdisplay, so those are sent with the native timing
and scaled.
A sink can also offer a real mode with the same clock and totals as
its native mode. CTA-861 VIC 102 (4096x2160@60) and VIC 97
(3840x2160@60) both use 594 MHz and 4400x2250. With 3840x2160@60 as
the preferred mode, a 4096x2160@60 request goes out with the 3840x2160
timing and the framebuffer scaled into it (dst 3840x2025 at y=67),
while the AVI InfoFrame still carries VIC 102. A JVC projector then
reports 3840x2160 and shows a corrupted right edge. 4096x2160@24,
whose totals differ, is sent and displayed correctly.
Inserted modes keep the native sync positions; a real mode with its
own active width does not. Compare those too, so only inserted modes
are patched.
Fixes: 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Assisted-by: Claude-Code:claude-opus-5-5
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 22f9a2da101c37f821cd00954f81dc598754f4d5)
Cc: stable@vger.kernel.org
With the Broadcast RGB property at Automatic,
amdgpu_dm_get_output_color_space() selects COLOR_SPACE_SRGB for RGB
output, so DC neither compresses the pixels nor, without a QS-capable
sink, signals full range in the AVI InfoFrame. A sink that follows
CTA-861 treats the default quantization of a CTA video format as limited
and expands 16-235 to 0-255: everything below 16 is crushed to black,
everything above 235 clips.
Follow the CTA-861 default for Automatic instead, as the DRM HDMI state
helper (hdmi_is_limited_range()) and i915 do: limited range on an HDMI
sink for CTA modes other than 640x480, full range elsewhere. Full and
Limited keep their explicit meaning. The same rule applies to the
BT.2020 RGB branch. With commit 892659399f64 ("drm/amd/display:
Propagate HDMI RGB quantization selectability") the AVI InfoFrame then
carries the matching Q value on sinks that support selection.
Measured on a Radeon RX 7600 (DCN 3.2.1) driving a JVC DLA-RS4100 at
1920x1080p24 RGB 12 bpc: the sink reports the signal as limited range
while the picture shows crushed shadows; rendering limited range in the
client makes it match a reference source.
The KUnit fixtures that reach amdgpu_dm_get_output_color_space() now
carry a connector, since Automatic reads its display_info, and five
cases cover the new rule.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5796
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Assisted-by: Claude Code:claude-fable-5-1
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d23f735d0eac52c673d91e21d146b09588537efc)
[Why]
The OTG_GLOBAL_SYNC_STATUS register controls various HW IRQ sources for
the output timing generator (OTG). VUPDATE_NO_LOCK is one of them.
To enable the IRQ, driver sets the VUPDATE_NO_LOCK_EN bit in the
GLOBAL_SYNC_STATUS register.
To ack the IRQ after it fires, the driver sets the VUPDATE_NO_LOCK_CLEAR
bit in the same GLOBAL_SYNC_STATUS register.
The bit sets are done through read/modify/write operations, which are
not atomic. Thus, the following race is possible:
Thread A: IRQ handler:
*HW IRQ fires*
# IRQ disable
val = read(GLOBAL_SYNC_STATUS)
unset(val, VUPDATE_NO_LOCK_EN)
write(val, GLOBAL_SYNC_STATUS)
# ACK reads VUPDATE_NO_LOCK_EN unset
val1 = read(GLOBAL_SYNC_STATUS)
set(val1, VUPDATE_NO_LOCK_CLEAR)
# IRQ enable
val = read(GLOBAL_SYNC_STATUS)
set(val, VUPDATE_NO_LOCK_EN)
write(val, GLOBAL_SYNC_STATUS)
# BAD! clears VUPDATE_NO_LOCK_EN
write(val1, GLOBAL_SYNC_STATUS)
Regarding the tagged Fixes: change, it appears the change made this race
more likely to occur. Since VUPDATE_NO_LOCK is now the sole IRQ source
for vblank handling, a single race on high refresh panels can lead to a
time out.
[How]
The GLOBAL_SYNC_STATUS register is only one example, other IRQ control
registers also share the same scheme. On top of GLOBAL_SYNC_STATUS,
let's clean up those as well.
To keep things simple, Let's atomize the IRQ rmw ops via a single
driver-wide spinlock. Due to the small scope of this lock, it is
unlikely to cause noticeable overhead on top of all the existing locking
within the IRQ set/handle paths.
Since DM is responsible for locking, wrap dc_interrupt_set/ack with the
spinlock in the new amdgpu_dm_irq_set/ack functions. Migrate/drop all
references in DM to dc_interrupt_set/ack to use amdgpu_dm_irq_set/ack
instead.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5616
Fixes: c87e6635d2 ("drm/amd/display: consolidate DCN vblank/flip handling onto vupdate_no_lock")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 70de0a0216583a53c946155f8c8adedfdca6b4e7)
Cc: stable@vger.kernel.org
amdgpu_dm_get_output_color_space() applies the Broadcast RGB connector
property to default RGB output, but always selects full-range output for
BT.2020 RGB. Consequently, explicitly selecting Limited has no effect on
the output CSC or AVI InfoFrame when HDR uses BT.2020 RGB.
Select COLOR_SPACE_2020_RGB_LIMITEDRANGE when the output encoding is RGB
and Broadcast RGB is Limited. Keep Automatic and Full at full range, and
leave YCbCr output unchanged.
Add KUnit coverage for limited-range RGB output through both BT.2020
connector colorspace values.
Fixes: 6eb4c13a38 ("drm/amd/display: Support "Broadcast RGB" drm property")
Signed-off-by: Satyajit Roy <sroy14@alum.utk.edu>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 022236eaa63bbf65761aa8aec43f661451a94654)
Cc: stable@vger.kernel.org
DC uses dc_edid_caps.qs_bit when constructing the HDMI AVI InfoFrame
quantization-range field. Although DRM parses the sink capability into
drm_display_info, DM never copies it into the DC EDID capabilities. The
field therefore remains zero and the AVI quantization range stays at its
default value.
Copy rgb_quant_range_selectable for HDMI sinks and extend the existing
EDID-capability KUnit test to cover it.
Fixes: 6eb4c13a38 ("drm/amd/display: Support "Broadcast RGB" drm property")
Signed-off-by: Satyajit Roy <sroy14@alum.utk.edu>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 892659399f64642e33072562a11ec1b2e7bd2263)
Cc: stable@vger.kernel.org
[Why & How]
The HDMI Forum VSDB reports the maximum DSC color depth a sink supports.
This maximum is cumulative: a sink that reports 12 bpc also supports 10
and 8 bpc.
The previous code used exact "== 10" and "== 12" comparisons chained with
else-if, so a 12 bpc sink only set frl_dsc_12bpc and never set
frl_dsc_10bpc, incorrectly narrowing the DSC bpc range usable with that
sink.
Use ">= 10" and a separate ">= 12" check so a sink advertising a higher
maximum also enables the lower DSC bit depths it supports.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4523adbf4dca157aea96a6f28b4e7b7ebd4d5eda)
This is another run of the Coccinelle script for converting kmalloc()
family of allocations to kmalloc_obj() via the existing rules in
scripts/coccinelle/api/kmalloc_objs.cocci
This catches both the set of kmalloc() uses added since the first
kmalloc_obj() conversions in v7.0 and adds a large group missed in the
first pass due to Coccinelle not interacting well with the cleanup.h
scoped_...() family of macros[1]. I worked around this with spatch's
"--macro-file" argument to a file with all the scoped_...() macros mapped
to Coccinelle's YACFE_ITERATOR[2] as that was the closest viable control
flow indicator I could find.
Build tested allmodconfig on x86, arm64, arm, loongarch, mips, powerpc,
riscv, and s390 with no new warnings.
Link: https://lore.kernel.org/lkml/202609021314.8A9C0B8@keescook/ [1]
Link: https://github.com/coccinelle/coccinelle/blob/master/standard.h [2]
Signed-off-by: Kees Cook <kees+treewide@kernel.org>
drmm_connector_init() and drmm_encoder_init() register their cleanup
(drm_connector_cleanup() / drm_encoder_cleanup()) as DRM-managed actions
tied to the drm_device lifetime. When the object memory is owned by
KUnit, it is freed before that action runs, so the cleanup touches freed
memory. Allocate these objects with drmm_kzalloc() so their lifetime
matches the cleanup action.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Assisted-by: Copilot:Claude-Opus-4.8
Acked-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add dm_test_crtc_destroy_state_releases_stream to cover the cur->stream
branch of amdgpu_dm_crtc_destroy_state(), complementing the existing
no-stream test.
The test attaches a DC stream to the CRTC state and takes an extra stream
reference so the destroy path drops back to the KUnit-managed reference
instead of freeing the stream, then verifies exactly one reference was
released.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add dm_test_crtc_enable_vblank_ips_restore_replay to cover the
pr->config.replay_supported side of the sr_supported OR in
amdgpu_dm_crtc_set_vblank().
The existing IPS restore test establishes self-refresh support via the PSR
version. This test instead marks the PSR version unsupported and sets
replay_supported, forcing the sr_supported computation to fall through to
the replay branch while still calling drm_crtc_vblank_restore().
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add dm_test_crtc_enable_vblank_ips_restore to cover the IPS/self-refresh
branch of amdgpu_dm_crtc_set_vblank() that calls drm_crtc_vblank_restore().
The test primes the DC with ips_support set and IPS not fully disabled, a
supported PSR version (self-refresh supported) and an immediate-disable
vblank config, so all four conditions gating the restore hold. A stub
get_vblank_timestamp hook is installed on the CRTC so the restore helper
passes its sanity check, and the enable path then runs to completion.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add dm_test_crtc_enable_vblank_queues_work and
dm_test_crtc_disable_vblank_queues_work to cover the
vblank_control_workqueue branch of amdgpu_dm_crtc_set_vblank():
- The enable test installs a real workqueue, retains the stream and
queues the control worker, then drains it and checks the active vblank
IRQ count was incremented.
- The disable test drives the no-stream sub-branch (the stream-retain is
skipped) and checks the worker decremented the count.
Both seed the ISM so the queued worker takes no state-machine transition,
keeping coverage on the vblank accounting; the ISM state machine itself
is covered by the ISM tests.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add coverage for the amdgpu_dm_crtc_set_vblank() paths reached through
amdgpu_dm_crtc_enable_vblank() and amdgpu_dm_crtc_disable_vblank():
- dm_test_crtc_enable_vblank_full_path: VRR-active enable that walks the
vupdate-irq branch and acquires the crtc/pageflip IRQ references.
- dm_test_crtc_enable_vblank_vupdate_busy: vupdate IRQ rejection aborts
the enable with -EBUSY.
- dm_test_crtc_enable_vblank_crtc_irq_error: crtc IRQ acquire failure
aborts the enable with -ENOENT.
- dm_test_crtc_enable_vblank_in_reset: an in-progress GPU reset returns
early before the vblank workqueue branch.
- dm_test_crtc_disable_vblank_vrr: the VRR disable path turns the vupdate
IRQ off and releases both IRQ references.
Add shared IRQ-source stubs and setup helpers so amdgpu_irq_get()/put()
succeed without hardware access.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
amdgpu_dm_create_validate_stream_for_sink() drove its RGB -> YUV422 ->
YUV420 chroma fallback by recursing and toggling the shared
aconnector->force_yuv420_output / force_yuv422_output fields, resetting
them after each recursive call. Those fields have no locking and the
function runs concurrently on the same connector from two paths: the
connector probe worker (->mode_valid) and a compositor's atomic check
(dm_update_crtc_state). When both run at once, one thread can clear the
override just before the other tests its exit condition, so the exit is
missed and validation loops indefinitely, hanging the modeset path.
[How]
- Replace the recursion with an explicit loop over the chroma encodings
wrapping the existing bpc walk.
- Carry the encoding/bpc selection on the stack, passed by value into
create_stream_for_sink() / fill_stream_properties_from_drm_display_mode(),
instead of mutating shared connector state.
- Derive the supported encodings and bit depths into bitmaps and drive
validation from them, gating each candidate on the sink's advertised
capability so unsupported encodings are never retried.
- Move encoding selection entirely to the caller and pass the chosen
dc_pixel_encoding into fill_stream_properties_from_drm_display_mode().
v2: sqaush in KUnit test fixes, merge with drm-misc changes (Alex)
Assisted-by: Copilot:claude-opus-4.8
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add dm_test_crtc_set_static_screen_optimze_sr_entry_psr and
dm_test_crtc_set_static_screen_optimze_psr_su_skips to cover the
allow_sr_entry == true path of amdgpu_dm_crtc_set_static_screen_optimze():
the replay/PSR event updates when psr_version < DC_PSR_VERSION_SU_1, and
skipping the PSR event update when psr_version is DC_PSR_VERSION_SU_1.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add dm_test_crtc_set_vupdate_irq_dc_busy and
dm_test_crtc_set_vupdate_irq_enable to cover the previously untested
paths in amdgpu_dm_crtc_set_vupdate_irq() where an OTG instance is
assigned: dc_interrupt_set() failing (returns -EBUSY) and succeeding
via a mock IRQ service (returns 0 for enable and disable).
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add dm_test_crtc_handle_vblank_completes_cursor_only to cover the
previously untested branch in amdgpu_dm_crtc_handle_vblank() where a
pending event with pflip_status != AMDGPU_FLIP_SUBMITTED (a cursor-only
commit) is signalled: the vblank event is sent, the vblank reference is
dropped, and acrtc->event is cleared.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expose amdgpu_dm_crtc_count_crtc_active_planes() for KUnit and add tests
covering the empty plane list and the mixed case exercising the mask
filter, cursor skip, missing plane state, and framebuffer presence
branches.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expose amdgpu_dm_idle_worker() for KUnit and add tests covering the
disabled exit, both loop break paths, and the enable-body path. Add
dm_kunit_alloc_dc_state() and dm_kunit_alloc_clk_mgr() helpers to
support the new tests.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KUnit coverage for the CRTC vblank paths:
- amdgpu_dm_crtc_handle_vblank: no-event completion and the
AMDGPU_FLIP_SUBMITTED guard that keeps a pending event pending.
- amdgpu_dm_crtc_vblank_control_worker: enable increments, disable
decrements, and disable clamps the active vblank IRQ count at zero.
- amdgpu_dm_crtc_disable_vblank: disable path returns cleanly when the
IRQ subsystem is not installed.
Expose amdgpu_dm_crtc_vblank_control_worker for KUnit via
STATIC_IFN_KUNIT/EXPORT_IF_KUNIT and declare it in the header.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expand KUnit coverage for amdgpu_dm_crtc.c with tests for functions that
are easy to exercise in isolation:
- amdgpu_dm_crtc_set_static_screen_optimze(): the !allow_sr_entry early
return.
- amdgpu_dm_crtc_enable_vblank(): rejection with -EINVAL when enabling
vblank on an unconfigured CRTC.
- amdgpu_dm_crtc_update_crtc_active_planes(): the no-stream branch that
resets active_planes to zero.
- amdgpu_dm_crtc_duplicate_state(): DM-specific fields are carried over.
- amdgpu_dm_crtc_reset_state(): a fresh state is allocated and installed.
- amdgpu_dm_crtc_destroy_state(): a stream-less state is freed cleanly.
Expose amdgpu_dm_crtc_destroy_state(), amdgpu_dm_crtc_duplicate_state(),
amdgpu_dm_crtc_reset_state() and amdgpu_dm_crtc_update_crtc_active_planes()
to the tests via STATIC_IFN_KUNIT/EXPORT_IF_KUNIT.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The duplicate amdgpu_dm_plane_test.o entry causes linker errors
during the arm-64 build.
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All supported GPU generations now support DRM format modifiers.
Remove all code from amdgpu_dm that dealt with tiling flags.
Note that the legacy non-DC display code still relies on
tiling flags, so we can't remove them outside of DC
until we also remove the legacy display code.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Link Mauve <linkmauve@linkmauve.fr>
Tested-by: Nikola Medić <nmedic89@gmail.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expose displayable DRM format modifiers based on which
tiling modes are supported by the GFX block.
Technically, DCE (Display Controller Engine) could
support all possible permutations of all parameters
independently of what GFX supports, with the limitation
that it can only display LINEAR images and the
displayable micro tiling mode (MICROTILE == DISPLAY).
It doesn't make sense to expose all possible permutations
of macro tiling modes, so let's just expose what the GFX
block of the current chip supports.
The following modes will be advertised:
- 2D_TILED_THIN1 + DISPLAY + macrotile params [1]
- 1D_TILED_THIN1 + DISPLAY
- LINEAR
[1] The macro tiling parameters depend on how many
bits per pixel of the specific surface has and
how the chip is configured. There is only one set
of valid macrotile params for a given surface.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Link Mauve <linkmauve@linkmauve.fr>
Tested-by: Nikola Medić <nmedic89@gmail.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expand KUnit coverage for event_property_update() beyond the null
connector skip. Add cases for the disconnected, missing-state and
missing-device skip branches, plus the fully connected path where
hdcp_get_content_protection_from_status() maps HDCP_OFF to DESIRED and
HDCP1 TYPE0 encryption to ENABLED.
The connected-path tests use dm_kunit_alloc_adev() so the drm_device has
an initialised mode_config connection_mutex, and pre-set the connector
state to the expected content protection value so
drm_hdcp_update_content_protection() takes its no-change early return.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cover the initialized path of psp_set_srm() using the SR-IOV VF bypass so
psp_hdcp_invoke() is a no-op. The test asserts the SET_SRM command is
staged (cmd_id, srm_buf_size and the copied SRM bytes) and that response
validation fails on the zeroed reply, returning -EINVAL without updating
srm_version.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expose the mod_hdcp DDC adapter callbacks for KUnit and add tests:
lp_write_i2c / lp_read_i2c / lp_write_dpcd / lp_read_dpcd use recording
fake i2c and DP aux backends to assert the built payloads (write flag,
address, length, buffer, and the read offset-then-data sequence), plus
failure when the connector is missing.
lp_atomic_write_poll_read_i2c / lp_atomic_write_poll_read_aux cover the
hardware-free early returns (NULL link and a payload too large to convert);
the success path submits fused-IO to the DMCUB and is out of reach for a
unit test.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expose srm_data_write() and srm_data_read() for KUnit and add tests
covering the sysfs SRM write/read paths:
- write stages the buffer into srm_temp and returns count; with the TA
uninitialized psp_set_srm() fails so the committed SRM is unchanged
- read returns -EINVAL when psp_get_srm() returns NULL (TA uninitialized)
- read returns 0 for an empty SRM using the SR-IOV VF bypass so
psp_hdcp_invoke() is a no-op and psp_get_srm() returns a non-NULL buffer
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cover the success path of hdcp_create_workqueue(): the workqueue and SRM
buffers are allocated, max_link is recorded, the cp_psp callbacks and
handle are published and every link's psp handle points at the device
psp. Also cover the dtm_v3_supported branch (set for DCN 3.1, clear
otherwise) and the init loop running for more than one link, alongside
the existing zero-link early-return case.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expose update_config() for KUnit and cover the NULL connector and NULL
dc_link early returns, the dpms_off removal path and the active path
that builds the display/link state and registers the connector. The
active path leaves the DTM TA uninitialized so add_display_to_topology()
returns early without touching firmware.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expose enable_assr() for KUnit and cover the "DTM TA not initialized"
path and the full command-build path, using the SR-IOV VF early-return
to bypass psp_dtm_invoke()'s firmware submit.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The enabled colorop shaper, 3D LUT, and blend programming paths were
uncovered, including the fallback for missing 3D LUT data.
[HOW]
Build complete colorop pipelines with valid LUT blobs, verify each
enabled stage, and cover the empty 3D LUT fallback.
Assisted-by: Copilot:GPT-5.6-Sol
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Truncated colorop pipelines that end after the 3x4 matrix had no
coverage for their fallback exits.
[HOW]
Exercise every remaining pipeline length with bypassed operations
and verify that the plane color stages stay disabled.
Assisted-by: Copilot:GPT-5.6-Sol
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The legacy plane color path did not exercise successful shaper, 3D
LUT, and blend LUT programming as a single transaction.
[HOW]
Provide valid legacy LUT blobs and verify that all three plane
color-management stages are enabled.
Assisted-by: Copilot:GPT-5.6-Sol
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
CRTC degamma classification and its mapping onto the plane input
transfer function lacked both success and conflict coverage.
[HOW]
Exercise legacy regamma detection, atomic and plane degamma LUTs,
BT.709 video mapping, and rejection of simultaneous degamma stages.
Assisted-by: Copilot:GPT-5.6-Sol
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The atomic regamma, shaper, and blend helpers were only exercised on
their linear bypass paths, leaving the generated transfer-function
cases untested.
[HOW]
Add sRGB success-path tests that verify the generated transfer
functions and the corresponding plane color-management enable flags.
Assisted-by: Copilot:GPT-5.6-Sol
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The color transfer-function calculation helpers were not covered by
the amdgpu_dm_color KUnit suite. They rely on DAL fixed-point math
and run under the KUnit UML build without native floating point.
[HOW]
Expose the five static helpers to KUnit and add direct coverage for
the legacy, 16-bit, and 32-bit input and output transfer-function
paths, including sRGB, linear, and ROM-backed variants.
Assisted-by: Copilot:GPT-5.6-Sol
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add a KUnit case covering the successful path of
amdgpu_dm_register_backlight_device(). The test uses the standard DRM
KUnit device helpers to register a native backlight device, verifies the
calculated backlight properties and cached brightness, and unregisters
the device through KUnit cleanup to avoid leaking a class device across
cases.
Assisted-by: Copilot:GPT-5.6-Terra
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit coverage for amdgpu_dm_commit_audio(), the remaining function
reported as untested by gcov.
The tests build hand-rolled drm_atomic_state arrays and back
dc_stream_get_status() with a fake dc->current_state to cover the
removal and addition ELD notifications along with their guard/skip
paths: writeback connector, detached connector, missing new CRTC state,
no modeset, and absent stream status.
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit coverage for amdgpu_dm_audio_component_get_eld(), one of the
functions reported as untested by gcov.
The tests use the standard DRM KUnit device plus drm_connector_init()
to build a real connector list, then invoke the bound audio component
get_eld callback. They cover the matching-connector ELD copy path, the
writeback-connector skip, and the no-match (disabled) path. A shared
connector funcs table and cleanup action back the fixtures.
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Group the cursor policy and validation helpers from amdgpu_dm.c
into a dedicated amdgpu_dm_cursor.c and amdgpu_dm_cursor.h.
The moved functions are:
dm_check_cursor_fb, dm_check_native_cursor_state,
dm_should_update_native_cursor, dm_get_oriented_plane_size,
dm_get_plane_scale, dm_plane_color_pipeline_active,
dm_crtc_get_cursor_mode.
The cursor helpers exposed by amdgpu_dm_cursor.h are called from
amdgpu_dm.c, so give the three that lacked a namespace prefix the
standard amdgpu_dm_ prefix: amdgpu_dm_check_native_cursor_state,
amdgpu_dm_should_update_native_cursor and
amdgpu_dm_crtc_get_cursor_mode.
The descending-zpos plane iterator shared by these functions and
amdgpu_dm_atomic_check (the for_each_oldnew_plane_in_descending_zpos
macro and its __get_next_zpos helper) moves to amdgpu_dm.h, with
the helper renamed amdgpu_dm_get_next_zpos and made non-static.
Relocate the corresponding KUnit tests into amdgpu_dm_cursor_test.c.
No functional change.
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Group the FreeSync/VRR helpers from amdgpu_dm.c into a dedicated
amdgpu_dm_freesync.c and amdgpu_dm_freesync.h. The moved functions are:
is_dc_timing_adjust_needed, is_timing_unchanged_for_freesync,
set_freesync_fixed_config, reset_freesync_config_for_crtc,
get_freesync_config_for_crtc, update_freesync_state_on_stream,
update_stream_irq_parameters, amdgpu_dm_handle_vrr_transition.
The FreeSync/VRR helpers exposed by amdgpu_dm_freesync.h are called
from amdgpu_dm.c, so give the seven that lacked a namespace prefix the
standard amdgpu_dm_ prefix:
Relocate the corresponding KUnit tests into amdgpu_dm_freesync_test.c.
No functional change.
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
amdgpu_dm_smu_write_watermarks_table() pushes fixed dcn watermark
clock settings to the SMU on Navi1x. It belongs with the other
dc-pplib bridge code, so move it out of amdgpu_dm.c into
amdgpu_dm_pp_smu.c.
It is called from dm_resume(), so it becomes a plain exported function
declared in amdgpu_dm_pp_smu.h (now included by amdgpu_dm.c) instead of
STATIC_IFN_KUNIT in amdgpu_dm.h. Relocate its KUnit test from the
amdgpu_dm suite to the amdgpu_dm_pp_smu suite. No functional change.
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
dm_should_disable_stutter() and its amdgpu_stutter_quirk PCI match
table are self-contained quirk logic. Move them out of amdgpu_dm.c
into amdgpu_dm_quirks.c alongside the existing DMI quirk handling.
The helper is called from amdgpu_dm_init(), so it becomes a plain
exported function instead of STATIC_IFN_KUNIT, and its declaration
moves from the KUnit-only block to a regular prototype in amdgpu_dm.h.
Relocate its KUnit tests from the amdgpu_dm suite to the
amdgpu_dm_quirks suite. No functional change.
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
amdgpu_dm_update_stream_scaling_settings() computes the stream src/dst
rectangles for a connector's scaling mode. It is already declared in
amdgpu_dm_connector.h and consumed by create_stream_for_sink(), so move
its definition out of the oversized amdgpu_dm.c into
amdgpu_dm_connector.c where it belongs.
Relocate its KUnit tests from the amdgpu_dm suite to the
amdgpu_dm_connector suite accordingly. No functional change.
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Verify hdcp_destroy() cancels each link's delayed works, removes
the SRM sysfs file and frees the workqueue and SRM buffers. Cover
both a populated work-queue and the zero-link / NULL-SRM path.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Verify event_watchdog_timer() cancels its pending watchdog_dwork
and runs process_output(), and that event_cpirq() runs
process_output() without arming the callback or watchdog timers.
Both release the work-queue mutex on return.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cover the per-connector scan in event_property_validate(): NULL,
disconnected and NULL-state connectors are skipped; a changed
encryption status updates the cached value and schedules
property_update_work; and an unchanged status leaves it
untouched.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Verify event_callback() cancels a pending callback_dwork and then
runs process_output(), which re-arms property_validate_dwork, and
that the work-queue mutex is released on return.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cover the HDCP display lifecycle helpers:
- hdcp_update_display() registers the connector and, on the
disable path, resets the per-link encryption status to
HDCP_OFF.
- hdcp_remove_display() reverts an ENABLED connector back to
DESIRED and clears the per-link entry, including the NULL
connector-state path.
- hdcp_reset_display() clears the encryption status and the
connector for every link.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
