The GMAC node incorrectly listed four clocks, including a separate tx_clk
and a TSU GCK clock sourced from ID 67. According to the SAM9X7 clocking
scheme, the GMAC uses only three clocks: HCLK, PCLK, and the TSU GCK
derived from the GMAC peripheral clock (ID 24).
Remove the unused tx_clk, update the clock-names accordingly, and correct
the assigned clock to use GCK 24 instead of GCK 67. This aligns the device
tree with the actual hardware clock topology and prevents misconfiguration
of the GMAC clock tree.
[root@SAM9X75 ~]$ cat /sys/kernel/debug/clk/clk_summary | grep gmac
gmac_gclk 1 1 1 266666666 0 0 50000 Y f802c000.ethernet tsu_clk
f802c000.ethernet tsu_clk
gmac_clk 2 2 0 266666666 0 0 50000 Y f802c000.ethernet hclk
f802c000.ethernet pclk
Fixes: 41af45af8b ("ARM: dts: at91: sam9x7: add device tree for SoC")
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20260309075329.1528-5-mihai.sain@microchip.com
[claudiu.beznea: massaged the patch description]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
A number of SoC platforms are adding modernized variants of their
already supported chips time, with a total of 12 new SoCs,
and two older SoC getting removed:
- Qualcomm Glymur is a compute SoC using 18 Oryon-2 CPU cores
- Qualcomm Mahua is a variant of Glymur with only 12 CPU cores, but
largely identical.
- Qualcomm Eliza is an embeded platform for mobile phone (SM7750) and IOT
(QC7790S/M) workloads
- Qualcomm IPQ5210 is a wireless networking SoC using Cortex-A53 cores
- Qualcomm apq8084 and ipq806x had only rudimentary support but no
actual products using them, so they are now gone.
- Axis ARTPEC-9 is a follow-up to the ARTPEC-8 embedded SoC, using
the Samsung SoC platform but now with Cortex-A55 cores
- ARM Zena is a virtual platform in FVP using Cortex-A720AE cores, with
additional versions planned to be merged in the future.
- ARM corstone-1000-a320 is a reference platform for IOT, using low-end
Cortex-A320 cores
- Microchip LAN9691 is an updated 64-bit variant of the arm32 lan966x
series of networking SoCs
- Microchip PIC64GX is an embedded RISC-V chip using SIFIVE U54 CPU cores
- Rockchip RV1103B is the low-end 32-bit single-core vision processor
- Renesas RZ/G3L (r9a08g046) is an industrial embedded chip using
Cortex-A55 cores, similar to the G3E and G3S variants we already
supported.
- NXP S32N79 is an automotive SoC using Cortex-A78AE cores, a
significant upgrade from the older S32V and S32G series
These all come with at least one reference board or an initial product
using these, in total there are 67 newly added boards. The ones for
already supported SoCs are:
- Two more Aspeed BMC based boards
- Three older tablets based on 32-bit OMAP4 and Exynos5 SoCs
- One Set-top-box based on Allwinner H6
- 22 additional industrial/embedded boards using 64-bit NXP i.MX8M
or i.MX9 SoCs
- 20 Qualcomm SoC based machines across all possible markets:
workstation, gaming, laptop, phone, networking, reference, ...
- Three more Rockchips rk35xx based boards
- Four variants of the Toradex Verdin using TI AM62
Other notable bits are:
- A cleanup for the 32-bit Tegra paz00 board moved the last
board specific code on Tegra into equivalent dts syntax.
- There continues to be a significant number of fixes for static
checking of dtc syntax, but it feels like this is slowing down,
hopefully getting into a state where most known issues are
addressed
- Additional hardware support for many existing boards across SoC
families, notably Qualcomm, Broadcom, i.MX2, i.MX6, Rockchips,
STM32, Mediatek, Tegra, TI and Microchip
-----BEGIN PGP SIGNATURE-----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=5Dwm
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"A number of SoC platforms are adding modernized variants of their
already supported chips time, with a total of 12 new SoCs, and two
older SoC getting removed:
- Qualcomm Glymur is a compute SoC using 18 Oryon-2 CPU cores
- Qualcomm Mahua is a variant of Glymur with only 12 CPU cores, but
largely identical.
- Qualcomm Eliza is an embeded platform for mobile phone (SM7750) and
IOT (QC7790S/M) workloads
- Qualcomm IPQ5210 is a wireless networking SoC using Cortex-A53
cores
- Qualcomm apq8084 and ipq806x had only rudimentary support but no
actual products using them, so they are now gone.
- Axis ARTPEC-9 is a follow-up to the ARTPEC-8 embedded SoC, using
the Samsung SoC platform but now with Cortex-A55 cores
- ARM Zena is a virtual platform in FVP using Cortex-A720AE cores,
with additional versions planned to be merged in the future.
- ARM corstone-1000-a320 is a reference platform for IOT, using
low-end Cortex-A320 cores
- Microchip LAN9691 is an updated 64-bit variant of the arm32 lan966x
series of networking SoCs
- Microchip PIC64GX is an embedded RISC-V chip using SIFIVE U54 CPU
cores
- Rockchip RV1103B is the low-end 32-bit single-core vision processor
- Renesas RZ/G3L (r9a08g046) is an industrial embedded chip using
Cortex-A55 cores, similar to the G3E and G3S variants we already
supported.
- NXP S32N79 is an automotive SoC using Cortex-A78AE cores, a
significant upgrade from the older S32V and S32G series
These all come with at least one reference board or an initial product
using these, in total there are 67 newly added boards. The ones for
already supported SoCs are:
- Two more Aspeed BMC based boards
- Three older tablets based on 32-bit OMAP4 and Exynos5 SoCs
- One Set-top-box based on Allwinner H6
- 22 additional industrial/embedded boards using 64-bit NXP i.MX8M or
i.MX9 SoCs
- 20 Qualcomm SoC based machines across all possible markets:
workstation, gaming, laptop, phone, networking, reference, ...
- Three more Rockchips rk35xx based boards
- Four variants of the Toradex Verdin using TI AM62
Other notable bits are:
- A cleanup for the 32-bit Tegra paz00 board moved the last board
specific code on Tegra into equivalent dts syntax.
- There continues to be a significant number of fixes for static
checking of dtc syntax, but it feels like this is slowing down,
hopefully getting into a state where most known issues are
addressed
- Additional hardware support for many existing boards across SoC
families, notably Qualcomm, Broadcom, i.MX2, i.MX6, Rockchips,
STM32, Mediatek, Tegra, TI and Microchip"
* tag 'soc-dt-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (841 commits)
arm64: dts: ti: k3: Use memory-region-names for r5f
ARM: dts: imx: Add DT overlays for DH i.MX6 DHCOM SoM and boards
ARM: dts: imx6sx: remove fallback compatible string fsl,imx28-lcdif
ARM: dts: imx25: rename node name tcq to touchscreen
ARM: dts: imx: b850v3: Disable unused usdhc4
ARM: dts: imx: b850v3: Define GPIO line names
ARM: dts: imx: b850v3: Use alphabetical sorting
ARM: dts: imx: bx50v3: Configure phy-mode to eliminate a warning
ARM: dts: imx: bx50v3: Configure switch PHY max-speed to 100Mbps
ARM: dts: imx7ulp: Add CPU clock and OPP table support
ARM: dts: imx7-mba7: Deassert BOOT_EN after boot
ARM: dts: tqma7: add boot phase properties
ARM: dts: imx7s: add boot phase properties
ARM: dts: tqma6ul[l]: correct spelling of TQ-Systems
ARM: dts: mba6ulx: add boot phase properties
ARM: dts: imx6ul[l]-tqma6ul[l]: add boot phase properties
ARM: dts: imx6ul/imx6ull: add boot phase properties
ARM: dts: imx6qdl-mba6: add boot phase properties
ARM: dts: imx6qdl-tqma6: add boot phase properties
ARM: dts: imx6qdl: add boot phase properties
...
Add the Performance Monitoring Unit (PMU) node with the appropriate
compatible string and interrupt line so that perf and other
PMU-based tooling can function correctly on this SoC.
[root@SAMA7D65 ~]$ dmesg | grep -i pmu
[ 1.487869] hw-perfevents: enabled with armv7_cortex_a7 PMU driver, 5 (8000000f) counters available
[root@SAMA7D65 ~]$ perf list hw
List of pre-defined events (to be used in -e or -M):
branch-instructions OR branches [Hardware event]
branch-misses [Hardware event]
bus-cycles [Hardware event]
cache-misses [Hardware event]
cache-references [Hardware event]
cpu-cycles OR cycles [Hardware event]
instructions [Hardware event]
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20260324070927.1496-2-mihai.sain@microchip.com
[claudiu.beznea: keep nodes alphanumerically sorted]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The pioB controller on the SAM9X7 SoC actually supports 27 GPIO lines.
The previous value of 26 was incorrect, leading to the last pin being
unavailable for use by the GPIO subsystem.
Update the #gpio-lines property to reflect
the correct hardware specification.
Fixes: 41af45af8b ("ARM: dts: at91: sam9x7: add device tree for SoC")
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20260209090735.2016-1-mihai.sain@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The UDC node does not define any child nodes, so the "#address-cells" and
"#size-cells" properties are unnecessary. Remove these unused properties
to simplify the devicetree node and keep it consistent with DT conventions.
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Link: https://lore.kernel.org/r/20260307-atmel-usb-v3-1-3dc48fe772be@gmail.com
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
[claudiu.beznea: s/at91/microchip in commit title]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Add support for LCD controller node
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20260225085430.480052-2-manikandan.m@microchip.com
[claudiu.beznea: add a space b/w the node address and the next '{']
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
There are a handful of new SoCs this time, all of these are
more or less related to chips in a wider family:
- SpacemiT Key Stone K3 is an 8-core risc-v chip, and the first
widely available RVA23 implementation. Note that this is
entirely unrelated with the similarly named Texas Instruments
K3 chip family that follwed the TI Keystone2 SoC.
- The Realtek Kent family of SoCs contains three chip models
rtd1501s, rtd1861b and rtd1920s, and is related to their earlier
Set-top-box and NAS products such as rtd1619, but is built
on newer Arm Cortex-A78 cores.
- The Qualcomm Milos family includes the Snapdragon 7s Gen 3
(SM7635) mobile phone SoC built around Armv9 Kryo cores of the Arm
Cortex-A720 generation. This one is used in the Fairphone Gen 6
- Qualcomm Kaanapali is a new SoC based around eight high
performance Oryon CPU cores
- NXP i.MX8QP and i.MX952 are both feature reduced versions of
chips we already support, i.e. the i.MX8QM and i.MX952, with
fewer CPU cores and I/O interfaces.
As part of a cleanup, a number of SoC specific devicetree files got
removed because they did not have a single board using the .dtsi files
and they were never compile tested as a result: Samsung s3c6400,
ST spear320s, ST stm32mp21xc/stm32mp23xc/stm32mp25xc, Renesas
r8a779m0/r8a779m2/r8a779m4/r8a779m6/r8a779m7/r8a779m8/r8a779mb/
r9a07g044c1/r9a07g044l1/r9a07g054l1/r9a09g047e37, and TI am3703/am3715.
All of these could be restored easily if a new board gets merged.
Broadcom/Cavium/Marvell ThunderX2 gets removed along with its only
machine, as all remaining users are assumed to be using ACPI
based firmware.
A relatively small number of 43 boards get added this time, and
almost all of them for arm64. Aside from the reference boards for
the newly added SoCs, this includes:
- Three server boards use 32-bit ASpeed BMCs
- One more reference board for 32-bit Microchip LAN9668
- 64-bit Arm single-board computers based on Amlogic s905y4,
CIX sky1, NXP ls1028a/imx8mn/imx8mp/imx91/imx93/imx95,
Qualcomm qcs6490/qrb2210 and Rockchip rk3568/rk3588s
- Carrier board for SOMs using Intel agilex5, Marvell Armada 7020,
NXP iMX8QP, Mediatek mt8370/mt8390 and rockchip rk3588
- Two mobile phones using Snapdragon 845
- A gaming device and a NAS box, both based on Rockchips rk356x
On top of the newly added boards and SoCs, there is a lot of
background activity going into cleanups, in particular towards
getting a warning-free dtc build, and the usual work on adding
support for more hardware on the previously added machines.
-----BEGIN PGP SIGNATURE-----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=IK23
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"There are a handful of new SoCs this time, all of these are more or
less related to chips in a wider family:
- SpacemiT Key Stone K3 is an 8-core risc-v chip, and the first
widely available RVA23 implementation. Note that this is entirely
unrelated with the similarly named Texas Instruments K3 chip family
that follwed the TI Keystone2 SoC.
- The Realtek Kent family of SoCs contains three chip models
rtd1501s, rtd1861b and rtd1920s, and is related to their earlier
Set-top-box and NAS products such as rtd1619, but is built on newer
Arm Cortex-A78 cores.
- The Qualcomm Milos family includes the Snapdragon 7s Gen 3 (SM7635)
mobile phone SoC built around Armv9 Kryo cores of the Arm
Cortex-A720 generation. This one is used in the Fairphone Gen 6
- Qualcomm Kaanapali is a new SoC based around eight high performance
Oryon CPU cores
- NXP i.MX8QP and i.MX952 are both feature reduced versions of chips
we already support, i.e. the i.MX8QM and i.MX952, with fewer CPU
cores and I/O interfaces.
As part of a cleanup, a number of SoC specific devicetree files got
removed because they did not have a single board using the .dtsi files
and they were never compile tested as a result: Samsung s3c6400, ST
spear320s, ST stm32mp21xc/stm32mp23xc/stm32mp25xc, Renesas
r8a779m0/r8a779m2/r8a779m4/r8a779m6/r8a779m7/r8a779m8/r8a779mb/
r9a07g044c1/r9a07g044l1/r9a07g054l1/r9a09g047e37, and TI
am3703/am3715. All of these could be restored easily if a new board
gets merged.
Broadcom/Cavium/Marvell ThunderX2 gets removed along with its only
machine, as all remaining users are assumed to be using ACPI based
firmware.
A relatively small number of 43 boards get added this time, and almost
all of them for arm64. Aside from the reference boards for the newly
added SoCs, this includes:
- Three server boards use 32-bit ASpeed BMCs
- One more reference board for 32-bit Microchip LAN9668
- 64-bit Arm single-board computers based on Amlogic s905y4, CIX
sky1, NXP ls1028a/imx8mn/imx8mp/imx91/imx93/imx95, Qualcomm
qcs6490/qrb2210 and Rockchip rk3568/rk3588s
- Carrier board for SOMs using Intel agilex5, Marvell Armada 7020,
NXP iMX8QP, Mediatek mt8370/mt8390 and rockchip rk3588
- Two mobile phones using Snapdragon 845
- A gaming device and a NAS box, both based on Rockchips rk356x
On top of the newly added boards and SoCs, there is a lot of
background activity going into cleanups, in particular towards getting
a warning-free dtc build, and the usual work on adding support for
more hardware on the previously added machines"
* tag 'soc-dt-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (757 commits)
dt-bindings: intel: Add Agilex eMMC support
arm64: dts: socfpga: agilex: add emmc support
arm64: dts: intel: agilex5: Add simple-bus node on top of dma controller node
ARM: dts: socfpga: fix dtbs_check warning for fpga-region
ARM: dts: socfpga: add #address-cells and #size-cells for sram node
dt-bindings: altera: document syscon as fallback for sys-mgr
arm64: dts: altera: Use lowercase hex
dt-bindings: arm: altera: combine Intel's SoCFPGA into altera.yaml
arm64: dts: socfpga: agilex5: Add IOMMUS property for ethernet nodes
arm64: dts: socfpga: agilex5: add support for modular board
dt-bindings: intel: Add Agilex5 SoCFPGA modular board
arm64: dts: socfpga: agilex5: Add dma-coherent property
arm64: dts: realtek: Add Kent SoC and EVB device trees
dt-bindings: arm: realtek: Add Kent Soc family compatibles
ARM: dts: samsung: Drop s3c6400.dtsi
ARM: dts: nuvoton: Minor whitespace cleanup
MAINTAINERS: Add Falcon DB
arm64: dts: a7k: add COM Express boards
ARM: dts: microchip: Drop usb_a9g20-dab-mmx.dtsi
arm64: dts: rockchip: Fix rk3588 PCIe range mappings
...
This .dtsi file is not included anywhere in the tree and can't be
tested.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260122202345.3387936-2-robh@kernel.org
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Add the dma property and associated dma activation for usart6 as part of
flx6 node.
Is useful for usual default console on this product.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20260102170135.70717-4-nicolas.ferre@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Fix the #size-cells property for i2c3 node and remove the dtbs_check
error telling that "#size-cells: 0 was expected" from schema
atmel,at91sam-i2c.yaml and i2c-controller.yaml.
Fixes: b51e4aea3e ("ARM: dts: microchip: sama7d65: Add FLEXCOMs to sama7d65 SoC")
Cc: stable@vger.kernel.org # 6.16+
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20260102170135.70717-3-nicolas.ferre@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Update the ranges property for the flexcom9 as per the datasheet and
align with the reg property.
Fixes: b51e4aea3e ("ARM: dts: microchip: sama7d65: Add FLEXCOMs to sama7d65 SoC")
Cc: stable@vger.kernel.org # 6.16+
Signed-off-by: Hari Prasath Gujulan Elango <hari.prasathge@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20260102170135.70717-2-nicolas.ferre@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The problem is that the MDIO controller can't detect any of the PHYs.
The reason is that the lan966x is not pulling high the GPIO 53 that is
connected to the PHYs reset GPIO. Without doing this the PHYs are kept
in reset. The mdio controller framework has the possibility to control a
GPIO to release the reset of the PHYs. So take advantage of this and set
line to be high before accessing the PHYs.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20251119134750.394655-1-horatiu.vultur@microchip.com
[claudiu.beznea: add microchip in patch title, s/possiblity/possibility
in patch description]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
On some flexcom nodes related to uart, the fifo sizes were wrong: fix
them to 32 data. Note that product datasheet is being reviewed to fix
inconsistency, but this value is validated by product's designers.
Fixes: 261dcfad1b ("ARM: dts: microchip: add sama7d65 SoC DT")
Fixes: b51e4aea3e ("ARM: dts: microchip: sama7d65: Add FLEXCOMs to sama7d65 SoC")
Cc: stable@vger.kernel.org # 6.16+
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20251114103313.20220-1-nicolas.ferre@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
There are five sets of new SoCs that get added in existing families,
all of them being either upgrades or cut-down versions of the older chips:
- Apple M2 Pro, M2 Max and M2 Ultra, used in the 2022/2023 generation of
high-end workstations and laptops from Apple. Linux has been working
on these for a while but stil requires patches.
- Axis Artpec8 is an Armv8 chip based on Samsung Exynos design,
unlike the earlier Armv7 Artpec6 from the same company that
was part of a separate family of chips.
- NXP i.MX91 is a cut-down version of i.MX93, using only a single
Cortex-A55 core.
- Qualcomm Lemans Auto is a variant of the Lemans SoC that was
originally merged under the sa8775p name, the differences
being mostly the firmware configuration of the platform.
- Four new Renesas SoCs RZ/T2H (r9a09g077m44), RZ/N2H (r9a09g087m44),
RZ/T2H (r9a09g077), and RZ/N2H (r9a09g087) are all industrial bedded
SoCs based on Cortex-A55 cores
In total, there are 65 new machines, including:
- Industrial embedded system and single-board computers based on NXP,
Allwinner, TI, Rockchips, Marvell, Xilinx Spacemit, Starfive chips.
- Reference boards for the newly added Renesas, Qualcomm, NXP and Axis
ARMv8 chips as well as Microchip's MPFS RISC-V SoC
- Laptops and Workstations using Apple M2 and Qualcomm Snapdragon
X1 chips.
- Several Samsung phones using Qualcomm Snapdragon chips
- Set-top boxes based on Allwinner H313
- Five BMC boards using 32-bit ASpeed SoCs
- Three network routers using IXP4xx (ARMv5!) and Broadcom bcm4708
(ARMv7) SoCs
Two machines get phased out because they were available only in small
quantities but never made it into products: one STi407 based reference
board, and a Snapdragon 845 based Chromebook.
Aside from the newly added machines, a lot of work went into
improving hardware support on the existing machines and cleaning
up contents for validation.
-----BEGIN PGP SIGNATURE-----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=9OtD
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC dt updates from Arnd Bergmann:
"There are five sets of new SoCs that get added in existing families,
all of them being either upgrades or cut-down versions of the older
chips:
- Apple M2 Pro, M2 Max and M2 Ultra, used in the 2022/2023 generation
of high-end workstations and laptops from Apple. Linux has been
working on these for a while but stil requires patches.
- Axis Artpec8 is an Armv8 chip based on Samsung Exynos design,
unlike the earlier Armv7 Artpec6 from the same company that was
part of a separate family of chips.
- NXP i.MX91 is a cut-down version of i.MX93, using only a single
Cortex-A55 core.
- Qualcomm Lemans Auto is a variant of the Lemans SoC that was
originally merged under the sa8775p name, the differences being
mostly the firmware configuration of the platform.
- Four new Renesas SoCs RZ/T2H (r9a09g077m44), RZ/N2H (r9a09g087m44),
RZ/T2H (r9a09g077), and RZ/N2H (r9a09g087) are all industrial
bedded SoCs based on Cortex-A55 cores
In total, there are 65 new machines, including:
- Industrial embedded system and single-board computers based on NXP,
Allwinner, TI, Rockchips, Marvell, Xilinx Spacemit, Starfive chips.
- Reference boards for the newly added Renesas, Qualcomm, NXP and
Axis ARMv8 chips as well as Microchip's MPFS RISC-V SoC
- Laptops and Workstations using Apple M2 and Qualcomm Snapdragon X1
chips.
- Several Samsung phones using Qualcomm Snapdragon chips
- Set-top boxes based on Allwinner H313
- Five BMC boards using 32-bit ASpeed SoCs
- Three network routers using IXP4xx (ARMv5!) and Broadcom bcm4708
(ARMv7) SoCs
Two machines get phased out because they were available only in small
quantities but never made it into products: one STi407 based reference
board, and a Snapdragon 845 based Chromebook.
Aside from the newly added machines, a lot of work went into improving
hardware support on the existing machines and cleaning up contents for
validation"
* tag 'soc-dt-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (931 commits)
arm64: dts: apm-shadowcat: Drop "apm,xgene2-pcie" compatible
arm64: dts: apm-shadowcat: Move slimpro nodes out of "simple-bus" node
ARM: dts: microchip: sam9x7: Add qspi controller
arm64: dts: qcom: Add MST pixel streams for displayport
arm64: dts: qcom: sm6350: correct DP compatibility strings
arm64: dts: qcom: monaco-evk: Enable Adreno 623 GPU
arm64: dts: qcom: qcs8300-ride: Enable Adreno 623 GPU
arm64: dts: qcom: qcs8300: Add gpu and gmu nodes
arm64: dts: allwinner: h313: Add Amediatech X96Q
dt-bindings: arm: sunxi: Add Amediatech X96Q
arm64: dts: apple: t8015: Add SPMI node
arm64: dts: apple: t8012: Add SPMI node
arm64: dts: apple: Add J180d (Mac Pro, M2 Ultra, 2023) device tree
arm64: dts: rockchip: Add devicetree for the ROC-RK3588-RT
dt-bindings: arm: rockchip: Add Firefly ROC-RK3588-RT
arm64: dts: rockchip: update pinctrl names for Radxa E52C
arm64: dts: rockchip: remove vcc_3v3_pmu regulator for Radxa E52C
arm64: dts: apple: Add J474s, J475c and J475d device trees
arm64: dts: apple: Add J414 and J416 Macbook Pro device trees
arm64: dts: apple: Add initial t6020/t6021/t6022 DTs
...
The SDMMC in this IP currently only supports legacy mode
due to a hardware quirk, setting the flags to reflect the limitation.
Fixes: deaa14ab6b ("ARM: dts: microchip: add support for sama7d65_curiosity board")
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20250819170528.126010-1-Ryan.Wanner@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Add the definition of uart3 at the side of i2c3 for flexcom3.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Ryan Wanner <ryan.wanner@microchip.com>
Link: https://lore.kernel.org/r/20250905092044.25429-1-nicolas.ferre@microchip.com
[claudiu.beznea: moved atmel,usart-mode at the end of the node to comply
with dts coding style]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The DTS code coding style expects exactly one space around '=' or '{'
characters.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20250819131736.86862-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Describe the cache memories according with datasheet chapter 15.2:
- L1 cache configuration with 32KB for both data and instruction cache.
- L2 cache configuration with 256KB unified cache.
Before this patch the kernel reported the warning:
[ 0.171425] cacheinfo: Unable to detect cache hierarchy for CPU 0
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20250619070636.8844-3-mihai.sain@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Describe the cache memories according with datasheet chapter 15.2:
- L1 cache configuration with 32KB for both data and instruction cache.
- L2 cache configuration with 256KB unified cache.
Before this patch the kernel reported the warning:
[ 0.161955] cacheinfo: Unable to detect cache hierarchy for CPU 0
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20250619070636.8844-2-mihai.sain@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Add the memory size properties for L1 according with block
diagram from datasheet:
- L1 cache configuration with 32 KB for both data and instruction cache.
[root@sama5d3 ~]$ lscpu
Architecture: armv7l
Byte Order: Little Endian
CPU(s): 1
On-line CPU(s) list: 0
Vendor ID: ARM
Model name: Cortex-A5
Caches (sum of all):
L1d: 32 KiB (1 instance)
L1i: 32 KiB (1 instance)
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20250625064934.4828-3-mihai.sain@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The naming scheme for delay properties includes "delay" in the name,
so renaming spi-cs-setup-ns property to spi-cs-setup-delay-ns.
Fixes: 46a8a137d8 ("ARM: dts: at91: sama5d2_icp: Set sst26vf064b SPI NOR flash at its maximum frequency")
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20250521054309.361894-4-manikandan.m@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The naming scheme for delay properties includes "delay" in the name,
so renaming spi-cs-setup-ns property to spi-cs-setup-delay-ns.
Fixes: 417e58ea41 ("ARM: dts: at91-sama5d27_wlsom1: Set sst26vf064b SPI NOR flash at its maximum frequency")
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20250521054309.361894-3-manikandan.m@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The naming scheme for delay properties includes "delay" in the name,
so renaming spi-cs-setup-ns property to spi-cs-setup-delay-ns.
Fixes: 09ce865122 ("ARM: dts: at91-sama5d27_som1: Set sst26vf064b SPI NOR flash at its maximum frequency")
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Reviewed-by: Alexander Dahl <ada@thorsis.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20250521054309.361894-2-manikandan.m@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The naming scheme for delay properties includes "delay" in the name,
so renaming spi-cs-setup-ns property to spi-cs-setup-delay-ns.
Fixes: 2c0a1faa4d ("ARM: dts: at91: sam9x60ek: Set sst26vf064b SPI NOR flash at its maximum frequency")
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Reviewed-by: Alexander Dahl <ada@thorsis.com>
Link: https://lore.kernel.org/r/20250521054309.361894-1-manikandan.m@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The at91-sama5d27_wlsom1 SoM has a WIL3000 Wifi SDIO device populated.
Improve the description of the Wifi compatible string by passing the
more specific "microchip,wilc3000" string.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20250617140502.1042812-1-festevam@gmail.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
When starting up, the GARDENA smart Gateway's power LED should be
flashing green. It is unclear why this has not been done earlier.
The LED frequency cannot be configured in the devicetree. Luckily, the
default is 1 Hz, which is what we want.
Signed-off-by: Ezra Buehler <ezra.buehler@husqvarnagroup.com>
Link: https://lore.kernel.org/r/20250612074737.311346-1-ezra@easyb.ch
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Add clock-output-names to the xtal nodes, so the driver can correctly
register the main and slow xtal.
This fixes the issue of the SoC clock driver not being able to find
the main xtal and slow xtal correctly causing a bad clock tree.
Fixes: 41af45af8b ("ARM: dts: at91: sam9x7: add device tree for SoC")
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/036518968ac657b93e315bb550b822b59ae6f17c.1750175453.git.Ryan.Wanner@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Add clock-output-names to the xtal nodes, so the driver can correctly
register the main and slow xtal.
This fixes the issue of the SoC clock driver not being able to find
the main xtal and slow xtal correctly causing a bad clock tree.
Fixes: 261dcfad1b ("ARM: dts: microchip: add sama7d65 SoC DT")
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/3878ae6d0016d46f0c91bd379146d575d5d336aa.1750175453.git.Ryan.Wanner@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Add support for HLCD controller.
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Link: https://lore.kernel.org/r/20250611-sam9x7-dts-v1-1-7f52fcb488ad@microchip.com
[claudiu.beznea: keep reg the 1st property on port@0 to comply with dts
coding style]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
We have dedictaded bindings for scl/sda nowadays. Switch away from the
deprecated plain 'gpios' property.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20250519112107.2980-4-wsa+renesas@sang-engineering.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
