Here is the big set of char, misc, iio, counter, fpga, and other small
driver subsystems for 7.3-rc1.
Overall, due to some driver removals we only added a bit more code than
removed, which was a nice change. Highlights in this merge request are:
- Loads of IIO driver updates and additions
- binder driver updates (more on that below...)
- Removal of the SGI XP and GRU drivers as they are not used anymore
and turn out to be pretty insecure overall
- Removal of the obsolete ibmasm driver as it's not being used anymore
- Coresight driver updates and additions
- Mei driver udpates
- Counter driver updates
- FPGA driver updates
- ICC driver updates
- lots and lots of other tiny driver updates to resolve reported
issues
All of these have been in linux-next for a while, with the only reported
issues being some major merge conflicts. Miguel pointed out some of
these with the Rust tree merge, which is the majority of them. I'll
follow up with a diffstat of the merge resolution I made against your
most recent tree, which works for me.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCao143A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymtUgCeKB62gT1JfA86cg3NDB1opp+10N0An3oBBegQ
IJLqJgK45dTNtMGBwGFV
=68af
-----END PGP SIGNATURE-----
Merge tag 'char-misc-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO/etc driver updates from Greg KH:
"Here is the big set of char, misc, iio, counter, fpga, and other small
driver subsystems for 7.3-rc1.
Overall, due to some driver removals we only added a bit more code
than removed, which was a nice change. Highlights in this merge
request are:
- Loads of IIO driver updates and additions
- binder driver updates (more on that below...)
- Removal of the SGI XP and GRU drivers as they are not used anymore
and turn out to be pretty insecure overall
- Removal of the obsolete ibmasm driver as it's not being used
anymore
- Coresight driver updates and additions
- Mei driver udpates
- Counter driver updates
- FPGA driver updates
- ICC driver updates
- lots and lots of other tiny driver updates to resolve reported
issues
All of these have been in linux-next for a while"
* tag 'char-misc-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (513 commits)
iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF
iio: adc: pac1921: fix wrong channel used in trigger handler read
iio: light: gp2ap002: re-enable irq if runtime suspend fails
iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes
iio: light: apds9306: fix PM reference leak in apds9306_read_data()
iio: gyro: mpu3050: fix sign of raw angular velocity readings
iio: srf04: fix pm_runtime handling on probe error path
iio: adc: ad4080: configure backend data size
iio: adc: adi-axi-adc: add data size support for AD408X backend
iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable
iio: dac: ad5446: fix OF module device table
iio: light: opt4001: Fix reversed GENMASK() arguments in fault count mask
iio: light: opt4001: Reject integration times with a non-zero seconds part
iio: light: opt4001: Fix incompatible pointer type passed to div_u64_rem()
iio: light: opt4001: Fix power down clearing bits of the wrong register
iio: light: opt4060: Fix incorrect register name in threshold read error message
iio: light: opt4060: Fix pointer type passed to div_u64_rem()
iio: light: opt4060: Reject integration times with a non-zero seconds part
iio: light: ltrf216a: fix runtime PM reference leak in error path
iio: pressure: dps310: fix NULL pointer dereference on ACPI probe
...
- bitmap_find_next_zero_area_off() optimization (Sunyi);
- bitmap_find_next_zero_area_off(): return size when no zero area is
found (Yury);
- bitmap vs IDA vs Maple Tree performance test (Yury);
- get rid of cpumap_print_to_pagebuf() (Yury);
- use nr_node_ids in __nodemask_pr_numnodes() (Li RongQing);
- bitops: make the *_bit_le functions use unsigned long (Benjamin);
- bitmap scatter & gather test fix (Christophe);
- use __ASSEMBLER__ in bitmap header files (Thomas);
-----BEGIN PGP SIGNATURE-----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=q8Lf
-----END PGP SIGNATURE-----
Merge tag 'bitmap-for-7.3' of https://github.com/norov/linux
Pull bitmap updates from Yury Norov:
"The usual set of fixes, cleanups and performance improvements together
with a couple of new tests:
- bitmap_find_next_zero_area_off() optimization (Sunyi)
- bitmap_find_next_zero_area_off(): return size when no zero area is
found (Yury)
- bitmap vs IDA vs Maple Tree performance test (Yury)
- get rid of cpumap_print_to_pagebuf() (Yury)
- use nr_node_ids in __nodemask_pr_numnodes() (Li RongQing)
- bitops: make the *_bit_le functions use unsigned long (Benjamin)
- bitmap scatter & gather test fix (Christophe)
- use __ASSEMBLER__ in bitmap header files (Thomas)"
* tag 'bitmap-for-7.3' of https://github.com/norov/linux: (25 commits)
lib: test bitmap vs IDA vs Maple Tree performance for region allocations
bitmap: Return size when no zero area is found
media: s5p-mfc: Treat bitmap size as allocation failure
crypto: ccp: Treat bitmap size as allocation failure
powerpc/msi: Treat bitmap size as allocation failure
ARM: dma-mapping: Treat bitmap size as allocation failure
bitmap: drop bitmap_next_set_region()
nodemask: reduce bitmap width to nr_node_ids in __nodemask_pr_numnodes()
bitmap: Properly initialise destination bitmap for scatter & gather test
lib/bitmap-str: get rid of cpumap_print_to_pagebuf()
perf: Use sysfs_emit() for cpumask show callbacks
PCI/sysfs: Use sysfs_emit() for cpumask show callbacks
RDMA/hfi1: Use sysfs_emit() for cpumask show helper
hwtracing: hisi_ptt: Use sysfs_emit() for cpumask show
fpga: dfl-fme-perf: Use sysfs_emit() for cpumask show
devfreq: Use sysfs_emit() for cpumask show callbacks
cpu: Use sysfs_emit() for cpumask show callback
x86/events: Use sysfs_emit() for cpumask show callbacks
powerpc: Use sysfs_emit() for cpumask show callbacks
arm: Use sysfs_emit() for cpumask show callbacks
...
This is relatively smaller update for CoreSight/hwtracing subsystem updates.
- MAINTAINERS update for HiSilicon PCI Trace & Tune drivers
- Minor fixes to hisi_ptt driver
- Various fixes to the coresight etm4x dirvers
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
-----BEGIN PGP SIGNATURE-----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=iRuU
-----END PGP SIGNATURE-----
Merge tag 'coresight-next-v7.3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
coresight: Updates for Linux v7.3
This is relatively smaller update for CoreSight/hwtracing subsystem updates.
- MAINTAINERS update for HiSilicon PCI Trace & Tune drivers
- Minor fixes to hisi_ptt driver
- Various fixes to the coresight etm4x dirvers
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v7.3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux:
coresight: etm4x: remove redundant fields in etmv4_save_state
coresight: etm4x: missing cscfg_csdev_disable_active_config() in perf enable
coresight: etm4x: fix leaked trace id
coresight: etm4x: fix underflow for usage of (nrseqstate - 1)
coresight: etm4x: fix wrong check of etm4x_sspcicrn_present()
hwtracing: hisi_ptt: Remove unnecessary trace buffer zeroing in trace_start()
hwtracing: hisi_ptt: Propagate DMA reset timeout in trace_start()
MAINTAINERS: Update HiSilicon PCI Trace and Tune maintainer
coresight: etm3x: Fix cntr_val_show() to match cntr_val_store() behavior
Some of fields are redundant in etmv4_save_state and never used:
ss_status => trcsscsr
seq_state => trcseqstr
cntr_val => trccntvr
vinst_ctrl => trcvictlr
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260725113645.57519-13-yeoreum.yun@arm.com
In the perf enable path, there are missing cases where
cscfg_csdev_disable_active_config() is not called:
- Branch broadcast is selected but not supported by the hardware
- etm4_enable_hw() fails
This can lead to a leak of config_desc->active_cnt.
Fix this by properly calling cscfg_csdev_disable_active_config()
in these error paths.
Fixes: 810ac401db ("coresight: etm4x: Add complex configuration handlers to etmv4")
Suggested-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260725113645.57519-6-yeoreum.yun@arm.com
If etm4_enable_sysfs() fails in cscfg_csdev_enable_active_config(),
the trace ID may be leaked because it is not released.
To address this, call etm4_release_trace_id() when etm4_enable_sysfs()
fails in cscfg_csdev_enable_active_config().
Fixes: 7ebd0ec6cf ("coresight: configfs: Allow configfs to activate configuration")
Reviewed-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260725113645.57519-4-yeoreum.yun@arm.com
According to IHI006H Embedded Trace Macrocell Architecture
Specification[0], TRCSEQEVR<n> is implemented only when
TRCIDR5.NUMSEQSTATE is 0b100, in which case n ranges from 0 to 2;
otherwise, TRCIDR5.NUMSEQSTATE is 0b000.
IOW, the number of usage in the initialisation or setting
TRCSEQEVR<n> with drvdata->nrseqstate - 1 in the loop could make
underflow issue when TRCIDR5.NUMSEQSTATE is 0b000.
Therefore, introduce nr_seq_ctrls field and untie it from nrseqstate.
As part of this introduce ETM_MAX_SEQ_TRANSITIONS macro and
apply nr_seq_ctrls and above macro to TRCSEQEVR<n> relevant fields setup.
Link: https://developer.arm.com/documentation/ihi0064/latest/ [0]
Fixes: 2e1cdfe184 ("coresight-etm4x: Adding CoreSight ETM4x driver")
Suggested-by: Leo Yan <leo.yan@arm.com>
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260725113645.57519-3-yeoreum.yun@arm.com
According to Embedded Trace Macrocell Architecture Specification
ETMv4.0 to ETM4.6 [0], TRCSSPCICR<n> is present only if all of
the following are true:
- TRCIDR4.NUMSSCC > n.
- TRCIDR4.NUMPC > 0b0000.
- TRCSSCSR<n>.PC == 0b1.
Comment for etm4x_sspcicrn_present() is align with the specification.
However, the check should use drvdata->nr_pe_cmp to check TRCIDR4.NUMPC
not nr_pe.
Link: https://developer.arm.com/documentation/ihi0064/latest/ [0]
Fixes: f6a18f354c ("coresight: etm4x: Handle access to TRCSSPCICRn")
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260725113645.57519-2-yeoreum.yun@arm.com
hisi_ptt_trace_start() clears all four trace buffers before enabling
tracing.
This is unnecessary. On trace stop, hisi_ptt_update_aux() copies only
the number of bytes reported in HISI_PTT_TRACE_WR_STS. On buffer-full
interrupts, it copies a full completed buffer. In both cases the driver
only consumes data written by hardware.
Remove the buffer clearing from the trace start path.
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Reviewed-by: Yicong Yang <yangyccccc@gmail.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260414172451.14331-3-sanman.pradhan@hpe.com
hisi_ptt_wait_dma_reset_done() discards the return value of
readl_poll_timeout_atomic(). If the DMA engine does not complete its
reset within the timeout, hisi_ptt_trace_start() proceeds to start
tracing regardless.
Return a bool from hisi_ptt_wait_dma_reset_done(), consistent with the
other wait helpers in this driver. On timeout, log an error, de-assert
the reset bit, and return -ETIMEDOUT. Move ctrl->started to the
successful path so a failed start does not leave the trace marked as
active.
Fixes: ff0de066b4 ("hwtracing: hisi_ptt: Add trace function support for HiSilicon PCIe Tune and Trace device")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Reviewed-by: Sizhe Liu <liusizhe5@huawei.com>
Reviewed-by: Yicong Yang <yangyccccc@gmail.com>
Tested-by: Sizhe Liu <liusizhe5@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260414172451.14331-2-sanman.pradhan@hpe.com
The cntr_val_show() function was intended to print the values of all
counters using a loop. However, due to a buffer overwrite issue with
sprintf(), it effectively only displayed the value of the last counter.
The companion function, cntr_val_store(), allows users to modify a
specific counter selected by 'cntr_idx'. To maintain consistency
between read and write operations and to align with the ETM4x driver
behavior, modify cntr_val_show() to report only the value of the
currently selected counter.
This change removes the loop and the "counter %d:" prefix, printing
only the hexadecimal value. It also adopts sysfs_emit() for standard
sysfs output formatting.
Fixes: a939fc5a71 ("coresight-etm: add CoreSight ETM/PTM driver")
Cc: stable@vger.kernel.org
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251202082613.3265761-1-visitorckw@gmail.com
cpumask_show() is a sysfs show callback. Use sysfs_emit() and
cpumask_pr_args() to emit the mask.
This prepares for removing cpumap_print_to_pagebuf().
Signed-off-by: Yury Norov <ynorov@nvidia.com>
intel_th_output_open() looks up the output device with
bus_find_device_by_devt(), which returns the device with a reference that
must be dropped after use.
commit 95fc36a234 ("intel_th: fix device leak on output open()")
attempted to drop the reference from intel_th_output_release(). However,
a successful open replaces file->f_op with the output driver file
operations before returning, so close runs the output driver release
callback instead.
For MSC outputs, close runs intel_th_msc_release(), which only removes
the per-file iterator and does not drop the device reference taken by
intel_th_output_open(). Consequently, every successful MSC output open
leaks one device reference.
Drop the device reference from intel_th_msc_release(), which is the
release path actually used for MSC output files. Remove the now-unused
intel_th_output_release() callback from intel_th_output_fops.
Fixes: 95fc36a234 ("intel_th: fix device leak on output open()")
Cc: stable <stable@kernel.org>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260715070851.2077965-1-lgs201920130244@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Here is the big set of char, misc, iio, fpga, and other small driver
subsystems changes for 7.2-rc1.
Lots of little stuff in here, the majority being of course the IIO
driver updates, as a list they are:
- IIO driver updates and additions
- GPIB driver bugfixes and cleanups
- Android binder driver updates (rust and C version)
- counter driver updates
- MHI driver updates
- mei driver updates
- w1 driver updates
- interconnect driver updates
- Comedi driver fixes and updates
- some obsolete char drivers removed (applicom and dtlk)
- hwtracing driver updates
- other tiny driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCajk4Gg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl89wCdG1WBLsvKHZ3zaFWd4POE8G/gS1YAnRf0GcRB
0F1/iBXSZLaRF/p9dsGq
=fg13
-----END PGP SIGNATURE-----
Merge tag 'char-misc-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull misc driver updates from Greg KH:
"Here is the big set of char, misc, iio, fpga, and other small driver
subsystems changes for 7.2-rc1.
Lots of little stuff in here, the majority being of course the IIO
driver updates, as a list they are:
- IIO driver updates and additions
- GPIB driver bugfixes and cleanups
- Android binder driver updates (rust and C version)
- counter driver updates
- MHI driver updates
- mei driver updates
- w1 driver updates
- interconnect driver updates
- Comedi driver fixes and updates
- some obsolete char drivers removed (applicom and dtlk)
- hwtracing driver updates
- other tiny driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits)
w1: ds2482: Use named initializers for arrays of i2c_device_data
firmware: stratix10-svc: Add support to query Arm Trusted Firmware (ATF) version
firmware: stratix10-rsu: avoid blocking reboot_image sysfs when busy
coresight: ultrasoc-smb: Fix OOB write in smb_sync_perf_buffer()
iio: adc: nxp-sar-adc: harden buffer ISR against per-channel read failure
iio: chemical: scd30: Replace manual locking with RAII locking
iio: light: tsl2591: remove unneeded tsl2591_compatible_als_persist_cycle()
iio: dac: ad5686: create bus ops struct
iio: dac: ad5686: cleanup doc header of local structs
iio: dac: ad5686: add control_sync() for single-channel devices
iio: dac: ad5686: add helpers to handle powerdown masks
iio: dac: ad5686: add of_match table to the spi driver
iio: dac: ad5686: drop enum id
iio: dac: ad5686: remove redundant register definition
iio: dac: ad5686: refactor include headers
iio: adc: ad4080: fix AD4880 chip ID
iio: light: veml3328: add support for new device
dt-bindings: iio: light: veml6030: add veml3328
fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header()
fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region()
...
Pass KBUILD_MODNAME through the driver registration macro so that the
driver core can create the module symlink in sysfs for built-in drivers,
and fixup all callers.
The Rust platform adapter is updated to pass the module name through to
the new parameter.
Tested on qemu with:
- x86 defconfig + CONFIG_RUST
- arm64 defconfig + CONFIG_RUST + CONFIG_CORESIGHT stuff
Examples after this patch:
/sys/bus/platform/drivers/...
coresight-itnoc/module -> coresight_tnoc
coresight-static-tpdm/module -> coresight_tpdm
coresight-catu-platform/module -> coresight_catu
serial8250/module -> 8250
acpi-ged/module -> acpi
vmclock/module -> ptp_vmclock
Co-developed-by: Rahul Bukte <rahul.bukte@sony.com>
Signed-off-by: Rahul Bukte <rahul.bukte@sony.com>
Signed-off-by: Shashank Balaji <shashank.mahadasyam@sony.com>
Link: https://patch.msgid.link/20260518-acpi_mod_name-v5-4-705ccc430885@sony.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Rename coresight_init_driver() to coresight_init_driver_with_owner() and
replace it with a macro wrapper that passes THIS_MODULE implicitly. This
is in line with what other buses do.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Co-developed-by: Rahul Bukte <rahul.bukte@sony.com>
Signed-off-by: Rahul Bukte <rahul.bukte@sony.com>
Signed-off-by: Shashank Balaji <shashank.mahadasyam@sony.com>
Link: https://patch.msgid.link/20260518-acpi_mod_name-v5-3-705ccc430885@sony.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
When the SMB sink is used as a perf AUX sink, smb_update_buffer() calls
smb_sync_perf_buffer() to copy hardware trace data into the perf AUX ring
buffer pages. It derives pg_idx = head >> PAGE_SHIFT from @head, which is
handle->head, and indexes dst_pages[pg_idx]. The pg_idx %= nr_pages
normalization is only applied after the first loop iteration.
This leaves the initial page index underived from the buffer size, which
can result in an out-of-bounds write past dst_pages[] when head exceeds
the AUX buffer size.
Normalize head modulo the AUX buffer size before deriving the page index
and offset, mirroring tmc_etr_sync_perf_buffer().
Fixes: 06f5c2926a ("drivers/coresight: Add UltraSoc System Memory Buffer driver")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/SYBPR01MB788156B3380A36835DB22290AF102@SYBPR01MB7881.ausprd01.prod.outlook.com
The etb10 miscdevice uses drvdata->reading as a shared exclusivity gate
for userspace buffer access. etb_open() claims that gate with
local_cmpxchg(), and etb_release() clears it with local_set().
That gate is shared per-device state rather than CPU-local state. A
running system can reach it whenever /dev/<etb> is opened, closed, and
reopened by different tasks while the device remains registered, so the
same drvdata->reading variable may be claimed on one CPU and later
cleared on another.
This code used to use atomic_t for the same gate, but commit
27b10da8ff ("coresight: etb10: moving to local atomic operations")
changed it to local_t even though the access pattern remained cross-task
and cross-CPU. Restore atomic_t together with atomic_cmpxchg() and
atomic_set() so the exclusivity gate again uses a primitive intended
for shared state.
The issue was found on Linux v6.18.21 by our static analysis tool while
scanning surviving local_t-on-shared-state sites, and then manually
reviewed against the live etb10 file-op path.
It was runtime-validated with a reproducible QEMU no-device KCSAN PoC
that kept the same report-local contract:
1. use one shared struct etb_drvdata carrier and its
drvdata->reading gate;
2. call etb_open() and etb_release() sequentially on that gate to
confirm the original claim/clear path;
3. bind the open side to CPU0 and the release side to CPU1 for the
same gate to show cross-CPU ownership;
4. run bound workers that repeatedly race etb_open() and
etb_release() on the same gate until KCSAN reports a target hit.
The harness recorded:
L1 passed open=1 release=1
reading_after_open=1 reading_after_release=0
L2 passed open_cpu=0 release_cpu=1
cross_cpu_release=1 reading_after=0 open_ret=0
Representative KCSAN excerpt from the no-device validation run:
BUG: KCSAN: data-race in etb_open.constprop.0.isra.0 [vuln_msv]
write to 0xffffffffc0003810 of 4 bytes by task 216 on cpu 1:
etb_open.constprop.0.isra.0+0x38/0x80 [vuln_msv]
l3_worker_thread_fn+0x4f/0xf0 [vuln_msv]
kthread+0x17e/0x1c0
ret_from_fork+0x22/0x30
read to 0xffffffffc0003810 of 4 bytes by task 215 on cpu 0:
etb_open.constprop.0.isra.0+0x18/0x80 [vuln_msv]
l3_worker_thread_fn+0x4f/0xf0 [vuln_msv]
kthread+0x17e/0x1c0
ret_from_fork+0x22/0x30
value changed: 0x00000000 -> 0x00000001
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 215 Comm: etb10_l3_a Tainted: G O 6.1.66 #2
This no-device harness is not a real ETB10 hardware end-to-end run, but
it preserves the same shared drvdata->reading gate and the same
etb_open()/etb_release() claim/clear contract. No real ETB10 hardware
was available for runtime testing.
Build-tested with:
make olddefconfig
make -j"$(nproc)" drivers/hwtracing/coresight/coresight-etb10.o
Fixes: 27b10da8ff ("coresight: etb10: moving to local atomic operations")
Cc: stable@vger.kernel.org
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260528165201.319452-1-runyu.xiao@seu.edu.cn
coresight_add_out_conn() increments nr_outconns before calling
devm_krealloc_array() and again before devm_kmalloc(). If either
allocation fails, the counter is already bumped while the corresponding
array entry is NULL or uninitialized garbage.
coresight_add_in_conn() has the same problem with nr_inconns and
devm_krealloc_array().
In both cases the probe returns -ENOMEM, which causes
coresight_get_platform_data() to call coresight_release_platform_data()
for cleanup. That function iterates up to nr_outconns (or nr_inconns)
entries and dereferences each pointer unconditionally, hitting the NULL
or garbage entry and panicking instead of failing gracefully.
Fix by moving the counter increments to after all allocations succeed,
so the struct is always consistent on any error path.
Fixes: 3d4ff657e4 ("coresight: Dynamically add connections")
Fixes: e3f4e68797 ("coresight: Store in-connections as well as out-connections")
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260511-fix-ref-count-issue-v1-1-99d647810d3c@oss.qualcomm.com
The current SysFS flow first enables the links and sink, then rolls back
to disable them if the source fails to enable. This failure can occur if
the associated CPU is offline, which causes the SMP call to fail.
Validate whether the associated CPU is online for a per-CPU tracer.
If the CPU is offline, return -ENODEV and bail out.
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-28-f88c4a3ecfe9@arm.com
This commit moves CPU hotplug callbacks from ETMv4 driver to core layer.
The motivation is the core layer can control all components on an
activated path rather but not only managing tracer in ETMv4 driver.
The perf event layer will disable CoreSight PMU event 'cs_etm' when
hotplug off a CPU. That means a perf mode will be always converted to
disabled mode in CPU hotplug. Arm CoreSight CPU hotplug callbacks only
need to handle the Sysfs mode and ignore the perf mode.
Add a 'mode' argument to coresight_pm_get_active_path() so it only
returns active paths for the relevant mode. Define the enum with bit
flags so it is safe for bitwise operations.
Change CPUHP_AP_ARM_CORESIGHT_STARTING to CPUHP_AP_ARM_CORESIGHT_ONLINE
so that the CPU hotplug callback runs in the online state and thread
context, allowing coresight_disable_sysfs() to be called directly to
disable the path.
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-27-f88c4a3ecfe9@arm.com
Except for software sources (e.g. STM), other sources treat multiple
enables as equivalent to a single enable. The device mode already
tracks the binary state, so it is redundant to operate refcount.
Introduce a helper coresight_is_software_source() for check software
source. Refactor to maintain the refcount only for software sources.
This simplifies future CPU PM handling without refcount logic.
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-26-f88c4a3ecfe9@arm.com
TRBE context can be lost when a CPU enters low power states. If a trace
source is restored while TRBE is not, tracing may run without an active
sink, which can lead to hangs on some devices (e.g., Pixel 9).
The save and restore flows are described in the section K5.5 "Context
switching" of Arm ARM (ARM DDI 0487 L.a). This commit adds save and
restore callbacks with following the software usages defined in the
architecture manual.
During the restore flow, since TRBLIMITR_EL1.E resets to 0 on a warm
reset, the trace buffer unit is disabled when idle resume, it is safe to
restore base/pointer/status registers first and program TRBLIMITR_EL1
last.
Signed-off-by: Yabin Cui <yabinc@google.com>
Co-developed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-25-f88c4a3ecfe9@arm.com
Unlike system level sinks, per-CPU sinks may lose power during CPU idle
states. Currently, this applies specifically to TRBE. This commit
invokes save and restore callbacks for the sink in the CPU PM notifier.
If the sink provides PM callbacks but the source does not, this is
unsafe because the sink cannot be disabled safely unless the source
can also be controlled, so veto low power entry to avoid lockups.
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-24-f88c4a3ecfe9@arm.com
Extend the CPU PM flow to control the path: disable from source up to
the node before the sink, then re-enable the same range on restore.
To avoid latency, control it up to the node before the sink.
Track per-CPU PM restore failures using percpu_pm_failed. Once a CPU
hits a restore failure, set the percpu_pm_failed and return NOTIFY_BAD
on subsequent notifications to avoid repeating half-completed
transitions.
Setting percpu_pm_failed permanently blocks CPU PM on that CPU. Such
failures are typically seen during development; disabling PM operations
simplifies the implementation, and a warning highlights the issue.
Clear this flag when the source device is unregistered.
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-23-f88c4a3ecfe9@arm.com
Since the path pointer is stored in the source's structure, retrieve it
directly when disabling the path.
As a result, the global variables used for caching path pointers are no
longer needed. Remove them to simplify the code.
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-22-f88c4a3ecfe9@arm.com
Set the path pointer on the target CPU during ETM enable and disable.
This ensures the device mode and path pointer are updated together and
observed atomically by the CPU PM notifier.
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-21-f88c4a3ecfe9@arm.com
Set the path pointer on the target CPU during ETM enable and disable.
This ensures the device mode and path pointer are updated together and
observed atomically by the CPU PM notifier.
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-20-f88c4a3ecfe9@arm.com
This commit only set the path pointer for system tracers (e.g. STM) in
coresight_{enable|disable}_source().
Later changes will set the path pointer locally for per-CPU sources.
This is because the mode and path pointer must be set together, so that
they are observed atomically by the CPU PM notifier.
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-19-f88c4a3ecfe9@arm.com
Introduce the coresight_enable_source() helper for enabling source
device.
Add validation to ensure the device is a source before proceeding with
further operations.
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-18-f88c4a3ecfe9@arm.com
Replace open code with coresight_path_first_node() and
coresight_path_last_node() for fetching the nodes.
Check that the node is not NULL before accessing csdev field.
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-17-f88c4a3ecfe9@arm.com
CPU PM notifiers need to control only part of a path instead of always
operating on the full path.
Add internal enable and disable helpers that take an inclusive node
range [from, to], validate that the requested nodes are ordered before
using them.
Update the existed coresight_{enable|disable}_path() interfaces as
full-path wrappers by passing the first and last path nodes. The helpers
coresight_path_{first|last}_node() are provided for conveniently
fetching the first and last nodes on the path.
In coresight_enable_path_from_to(), if a failure occurs at the last node
in the range, no device is actually enabled in this case, bail out
directly.
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-16-f88c4a3ecfe9@arm.com
coresight_enable_path() enables helpers attached to every device in
the path, including those bound to the source. However,
coresight_disable_path() skips the source node, so source helpers had
to be disabled separately in coresight_disable_source().
Move source helper disabling into coresight_disable_path() instead.
Make coresight_disable_path_from() start from the passed node nd, so
it can also disable helpers on the source. Update the comments
accordingly.
As coresight_disable_path_from() now changes its semantics from
"start beyond nd" to "start from nd", update the failure handling in
coresight_enable_path(). If enabling a node fails, iterate to the
previous node (the last successfully enabled one) and pass it to
coresight_disable_path_from() for rollback.
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-15-f88c4a3ecfe9@arm.com
cscfg_config_sysfs_get_active_cfg() will be used from idle flows, while
sleeping locks are not allowed. Introduce sysfs_store_lock to replace
the mutex to protect sysfs_active_config and sysfs_active_preset
accesses, with IRQ-safe locking to avoid lockdep complaint.
Refactor cscfg_config_sysfs_activate() to use spinlock for
sysfs_active_config and activate/deactivate config.
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-14-f88c4a3ecfe9@arm.com
ETMv4 driver save/restore callbacks still re-check conditions that are
already validated by the core layer before the callbacks are invoked.
Remove the duplicated checks and fold the two-level functions into
direct callback implementations. The obsolete WARN_ON() checks are
removed as well.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-13-f88c4a3ecfe9@arm.com
Add a helper etm4_pm_save_needed() to detect if need save context for
self-hosted PM mode and hook pm_save_disable() and pm_restore_enable()
callbacks through etm4_cs_pm_ops structure. With this, ETMv4 PM
save/restore is integrated into the core layer's CPU PM.
Organize etm4_cs_ops and etm4_cs_pm_ops together for more readable.
The CPU PM notifier in the ETMv4 driver is no longer needed, remove it
along with its registration and unregistration code.
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-12-f88c4a3ecfe9@arm.com
The current implementation only saves and restores the context for ETM
sources while ignoring the context of links. However, if funnels or
replicators on a linked path resides in a CPU or cluster power domain,
the hardware context for the link will be lost after resuming from low
power states.
To support context management for links during CPU low power modes, a
better way is to implement CPU PM callbacks in the Arm CoreSight core
layer. As the core layer has sufficient information for linked paths,
from tracers to links, which can be used for power management.
As a first step, this patch registers CPU PM notifier in the core layer.
If a source device provides callbacks for saving and restoring context,
these callbacks will be invoked in CPU suspend and resume.
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-11-f88c4a3ecfe9@arm.com
etm_setup_aux() fetches the per-CPU source pointer while preparing perf
AUX trace paths. This can race with CoreSight device unregistration, the
ETM device may has been released while the AUX setup still use it,
leading to use-after-free.
Move per-CPU path construction into etm_event_build_path() and use
the coresight_{get|put}_percpu_source_ref() pairs to take and drop
the device references, this ensures the device is safe to access during
path construction.
Update comments accordingly. Document a PREEMPT_RT corner case: the
put_device() may release resources while coresight_dev_lock (a raw
spinlock) is held, and the release may attempt to acquire a spinlock
that becomes sleepable under PREEMPT_RT. This will be fixed in the
future.
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-10-f88c4a3ecfe9@arm.com
Move the per-CPU source pointer from ETM perf to the core layer, as this
will be used for not only perf session and also for CPU PM notifiers.
Provides coresight_{set|clear|get}_percpu_source() helpers to access the
per-CPU source pointer. Add a raw spinlock to protect exclusive access.
Device registration and unregistration call the set and clear helpers
for init and teardown the pointers.
Update callers to invoke coresight_get_percpu_source() for retrieving
the pointer.
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-9-f88c4a3ecfe9@arm.com
coresight_get_ref() currently pins the provider module and takes a
reference on the parent device, but it does not pin &csdev->dev. Take a
reference on &csdev->dev when grabbing a CoreSight device and drop it in
coresight_put_ref().
Reorder the sequence to follow child-to-parent dependencies: first take
a reference on csdev, then on the parent device and grab the driver
module. Once the data and module are pinned, take a PM runtime
reference to power on the hardware.
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-8-f88c4a3ecfe9@arm.com
ETM perf callbacks currently use the per-CPU csdev_src pointer, which
can race with updates during device registration and unregistration.
The AUX setup already builds and stores the path in the event data.
Use this path to retrieve the source instead of csdev_src to avoid
the race.
Export coresight_get_source() and add etm_event_get_ctxt_path() to
retrieve the context's path and its source with READ_ONCE() /
WRITE_ONCE() accessors. Give the comments to explain why this
approach is safe when pause or resume callbacks preempt the disable
callback (e.g. via NMI).
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-7-f88c4a3ecfe9@arm.com
The hotplug lock is acquired and released in etm{3|4}_disable_sysfs(),
which are low-level functions. This prevents us from a new solution for
hotplug.
Firstly, hotplug callbacks cannot invoke etm{3|4}_disable_sysfs() to
disable the source; otherwise, a deadlock issue occurs. The reason is
that, in the hotplug flow, the kernel acquires the hotplug lock before
calling callbacks. Subsequently, if coresight_disable_source() is
invoked and it calls etm{3|4}_disable_sysfs(), the hotplug lock will be
acquired twice, leading to a double lock issue.
Secondly, when hotplugging a CPU on or off, if we want to manipulate all
components on a path attached to the CPU, we need to maintain atomicity
for the entire path. Otherwise, a race condition may occur with users
setting the same path via the Sysfs knobs, ultimately causing mess
states in CoreSight components.
This patch moves the hotplug locking from etm{3|4}_disable_sysfs() into
enable_source_store(). As a result, when users control the Sysfs knobs,
the whole flow is protected by hotplug locking, ensuring it is mutual
exclusive with hotplug callbacks.
Note, the paired function etm{3|4}_enable_sysfs() does not use hotplug
locking, which is why this patch does not modify it.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-6-f88c4a3ecfe9@arm.com
The CPU ID can be fetched directly from the coresight_device structure,
so the .cpu_id() callback is no longer needed.
Remove the .cpu_id() callback from source ops and update callers
accordingly.
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-5-f88c4a3ecfe9@arm.com
Add a new flag CORESIGHT_DESC_CPU_BOUND to indicate components that
are CPU bound. Populate CPU ID into the coresight_device structure;
otherwise, set CPU ID to -1 for non CPU bound devices.
Use the {0} initializer to clear coresight_desc structures to avoid
uninitialized values.
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-4-f88c4a3ecfe9@arm.com
This commit extracts the allocation and initialization of the coresight
device structure into a separate function to make future extensions
easier.
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-3-f88c4a3ecfe9@arm.com
If a helper fails to be enabled, unwind any helpers that were already
enabled earlier in the loop. This avoids leaving partially enabled
helpers behind.
Fixes: 6148652807 ("coresight: Enable and disable helper devices adjacent to the path")
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Tested-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-2-f88c4a3ecfe9@arm.com
In coresight_enable_sysfs(), for non-CPU sources (SOFTWARE, TPDM,
OTHERS), the source device is enabled via coresight_enable_source_sysfs()
before idr_alloc_u32() maps the path. If idr_alloc_u32() fails, the
original code jumped directly to err_source, which only calls
coresight_disable_path() and coresight_release_path(). The source device
was left enabled with an incremented refcnt but no path tracked for it,
leaving the device in an inconsistent state.
Disable the source before jumping to err_source so the enable and path
operations are fully unwound.
Fixes: 5c0016d7b3 ("coresight: core: Use IDR for non-cpu bound sources' paths.")
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260515-arm_coresight_path_power_management_improvement-v14-1-f88c4a3ecfe9@arm.com
When coresight_path_assign_trace_id() cannot assign a valid trace ID,
coresight_enable_sysfs() takes the err_path goto with ret still 0,
returning success to the caller despite no trace session being started.
Change coresight_path_assign_trace_id() to return int, moving the
IS_VALID_CS_TRACE_ID() check inside it so it returns -EINVAL on failure
and 0 on success. Update both callers to propagate this return value
directly instead of inspecting path->trace_id after the call.
Fixes: d87d76d823 ("Coresight: Allocate trace ID after building the path")
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Richard Cheng <icheng@nvidia.com>
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260512-fix-trace-id-error-v4-1-eb3de789767a@oss.qualcomm.com
It is a typo to use trcvmidcctlr0 to save and restore TRCVMIDCCTLR1.
Use trcvmidcctlr1 instead.
Fixes: f5bd523690 ("coresight: etm4x: Convert all register accesses")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260408-arm_cs_fix_trcvmidcctlr1_typo-v1-1-6a5695363b46@arm.com
