Post function is called from interrupt context. Returning same
error code in all cases rsults in excessive prints which can
cause irq throttling.
Return -ENODEV when port lookup fails in post function.
CRs-Fixed: 2790559
Change-Id: I75384b2116cb2fe1bbeaa2dac91157345f0bab54
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Signed-off-by: Jay Jayanna <jayanna@codeaurora.org>
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Add missing node reference put when memory allocation fails for the
tx_resume packet. Without this there could be dangling references
to a node.
Change-Id: I5a5dfa437243a39d3da660251c0357ff6eb6cbff
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
The node list only respresents the adjacent nodes in the system. Rename
the list to qrtr_all_epts to better describe the list contents. Rename
qrtr_nodes_lock to qrtr_epts_lock to better describe lock.
Change-Id: I168ca597d5b9b30d6c064c2a56b6e8b2dffa387b
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
First check if the node is already assigned the requested nid, this
allows an early exit for the common case.
Do not allow later nodes to overwrite a node id. The first to claim a
node id should get priority.
Change-Id: Ie3da0c3b709de8c68f9918cd485492f9eaa41247
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
net_dev_alloc() fails for high order allocations in system where memory
is fragmented and cause communication stall due to packet drops.
Use alloc_skb_with_frags() to avoid packet drops in memory fragmented case.
Change-Id: I46b7e0da0ed04c9222c975ee930f0f8d9b41453b
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
In order to prevent messages from stale sockets being sent, check if
ENETRESET has been set on the socket and drop the packet.
Change-Id: Ie9abc6c51139e82d3c9ebd4d546d1acd7269875e
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
There is a race for clients that open sockets before the control port
is bound. If a client gets an idr that was allocated before the control
port is bound, there is a chance the previous address owner sent lookup
packets to the control port. The new address owner will get residual
responses to these lookup packets.
Change the xa_alloc to xa_alloc_cyclic so new ids are allocated
instead of trying to reuse the freed ids.
Change-Id: Ie1bda7a818309503f80542e739bac646327296f7
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
There is a chance for a remote processor to become unresponsive while
QRTR is trying to broadcast a control message. This results in the node
lock being held for an extended period of time and prevents node lookup
which is needed to send messages.
Change the mutex to a rw_semaphore to allow concurrency during node
lookups and broadcasts.
Change-Id: I2e3fdde22edaac64f164cf08900e9d09b16c380d
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
A remote endpoint should not need to know when a client socket is freed
if the socket never established commnication with the endpoint. Add a
mode to keep track of which endpoints a socket communicates with.
There are three modes a socket can be in:
INIT - Socket has not sent anything or only local messages,
only send client close to local services.
SINGLE - Socket has sent messages to a single ept, send event
to this single ept.
MULTI - Socket has sent messages to multiple epts, broadcast
release of this socket.
Server state changes should be broadcast throughout the system. Change
the ipc state of a port when it sends a NEW SERVER control packet. This
ensures the DEL CLIENT control packet is propagated correctly for
servers.
Change-Id: I416742cff598bf7aa9da2baa2e86a53b18367870
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
There is a race where broadcast packets can be sent to a node that has
not sent the hello message to the remote processor. This breaks the
protocol expectation. Add a status variable to track when the hello
packet has been sent.
An alternative solution attempted was to remove the nodes from the
broadcast list until the hello packet is sent. This is not a valid
solution because hello messages are broadcasted if the ns is restarted
or started late. There needs to be a status variable separate from the
broadcast list.
Change-Id: I2a55e587f324e64e2bde4ea634de66008f190de1
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
dwc3 msm core driver shall start USB host or device mode with dwc3
controller driver. This shall fail specifically USB host mode due
to any error with xhci controller initialization. In this case HCD
would be unbinded causing NULL pointer deference when trying to
override its PM ops with dwc3_msm_override_pm_ops() API. To avoid
NULL pointer dereference add NULL check with dwc3_msm_override_pm_ops()
API.
Change-Id: Ia96e945d58b1bf1d5434b004ac3d3090b24c6208
Signed-off-by: Mayank Rana <quic_mrana@quicinc.com>
mdwc->gsi_ev_buff is seen NULL when dwc3_msm_notify_event() is getting
called from dwc3 driver's probe context as mdwc->gsi_ev_buff is being
allocated at end of dwc3_msm_core_init(). dwc3_otg_start_peripheral()
setups GSI event buffers with USB controller. Fix NULL pointer issue
by adding explicit check against NULL with mdwc->gsi_ev_buff.
Change-Id: Ia15b677b5fa55e4281a78fb877283fe37c9ad95f
Signed-off-by: Mayank Rana <quic_mrana@quicinc.com>
memremap() API shall return valid address or NULL. If return value
is NULL then it would result into NULL pointer dereference while
accessing ebc_trb_pool. Fix this unlikely issue by adding check
against NULL with return value from memremap() API.
Change-Id: I42ad1a735c0d4958a7251f27223af6cc0aa670dc
Signed-off-by: Mayank Rana <quic_mrana@quicinc.com>
DP driver uses altmode glink interface whereas USB driver uses
UCSI interface for getting PPM based DP and USB related notification.
PPM based notification can come in different order specifically when
PPM is being restarted with SSR. With PPM SSR (here ADSP SSR) DP driver
is getting disconnect notification but USB driver won't be getting
disconnect notification. Once ADSP SSR is being completed, DP does go
through re-initialization and it does need USB DP combo PHY as
concurrent mode (2 lane USB and 2 lane DP usage). Current code goes
ahead disabling USB host mode with DP not connected notification.
In some case DP notification is coming after ADSP SSR is being completed
but before USB notification has gone through. This results into DP
initiailzation failure (aux timeout) due to USB host mode not started
configuring USB DP combo PHY into concurrent mode.
Consider case: USB DP concurrent mode usage with connecting MPA and
performing ADSP SSR
a. USB and DP are initialized (concurrent mode)
b. ADSP SSR is being performed
c. USB gets usb role as UFP/host mode
d. DP notifies as DP not connected
e. DP notified as 2 lane usage
Current code tears down USB host mode functionality with DP not connected
notification. If above step c notification comes after step d, then step e
based functionality goes through as USB host mode is active. Due to
asynchronous nature of notification, usage of multiple interfaces (altmode
link and UCSI) and ADSP doesn't notify USB disconnect with SSR (due to USB
audio use case requirement) whereas notify disconnect with DP. It is needed
to use refcounting mechnism to decide when to tear down USB host session to
allow sharing of USB DP combo PHY. This change adds ref count usage to
address above issue.
Change-Id: I0ea80611e52c1e45fed50cde61741f7a9aedd87d
Signed-off-by: Mayank Rana <quic_mrana@quicinc.com>
Add error prints around qrtr endpoint registration fails. Adjust the
prints so more information error information is available during early
bootup.
Change-Id: I0cf41144c6b4e8d8de0c91914e46155bbe54c6c5
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Default linear mapping no longer works due to non-linear
policy-to-clk_domain index mapping in new chipsets, add
a new sysfs file hw_clk_domain in sysfs directory policy*
so that test script can capture the correct HW clock
domain index.
Change-Id: Id78df0074e9cb13dd1f748dbab2381a48440e8e9
Signed-off-by: Xubin Bai <quic_xubibai@quicinc.com>
struct kobj_type does not contain the default_attrs member anymore.
Instead create attribute group using the ATTRIBUTE_GROUPS macro and
assign to kobj_type object.
Change-Id: I5d21c816edb13b5020e064f55c3e495002897d4a
Signed-off-by: Sai Harshini Nimmala <quic_snimmala@quicinc.com>
Remove WALT_NONCRITICAL as it hasn't been useful.
Change-Id: Ia28005c5f980fcb598226b3aae4b21efeac1b526
Signed-off-by: Stephen Dickey <quic_dickey@quicinc.com>
Pause will not be invoked through core control until after
walt has been initialized. However, the walt_pause apis are
made available to other vendor modules, and if those modules
attempt to invoke pause prior to walt being initialized, an
invalid reference to walt_drain_thread will be made.
Prevent the walt_pause and walt_resume apis from being used
until after walt has been properly initialized, walt_halt_init
has been called, and walt_drain_thread properly created.
Change-Id: Iadd764ebfb7402529b49de6ef121d23dfcdc5649
Signed-off-by: Stephen Dickey <quic_dickey@quicinc.com>
Capture the fmax_capacity of the CPU reduced under cpufreq constraints
in the related tracepoint.
Change-Id: I3dc5c54a7a5850b9c5f4df8a40daea593fff023b
Signed-off-by: Sai Harshini Nimmala <quic_snimmala@quicinc.com>
We're currently using the ABI symbol list from within msm-kernel and is
not version-tracked by ACK. Thus, GKI_SKIP_IF_VERSION_MATCHES may
spuriously pass even if there is a symbol list change. Disable
GKI_SKIP_IF_VERSION_MATCHES for now until we start using symbol list
from ACK.
Change-Id: Ifea662029a193e36c4c6d28bedc167399f4f85ba
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Add the device information structure for sdx75 along with
its device id, firmware and edl image paths.
Remove the kconfig dependency on the esoc driver.
Change-Id: Iea7b3e82f274804d781bdbc333b36c64784eef33
Signed-off-by: Prudhvi Yarlagadda <quic_pyarlaga@quicinc.com>
Add one clk_measure node to support CPU Gold2 cluster for
Pineapple.
Change-Id: I2b7d3f4fa249b1496fe6104edcd54b030e2a7e8e
Signed-off-by: Xubin Bai <quic_xubibai@quicinc.com>
Enable u1u2 functionality in USB device mode when USB is operating
in super speed (gen1 speed).
Change-Id: I14056274b68c3ed395ee3673312606ded68afcd6
Signed-off-by: Mayank Rana <quic_mrana@quicinc.com>
eUSB2 repeater is unable to block KJKJ pulse during ESE1. This is
resulting into eUSB2 PHY and repeater going out of sync and next
link up in high speed fails. Fix this issue by performing soft
reset of eUSB2 PHY.
Change-Id: I9913fe4cab03b344dea0525f7a72282cd743a915
Signed-off-by: Mayank Rana <quic_mrana@quicinc.com>
Allow clients to see what IPA address a mem_buf object is
mapped to.
Change-Id: Ib3d47cb78bf7b1b217950e1e59b8d542abb3a331
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
